Structural jobs in Lindenhurst, NYCreate job alerts

Job Description The Building People, LLC, has a position open for a full-time HVAC/R Technician for the facilities engineering program to support a federal Agency. The HVAC Technician will have a strong focus on operating, maintaining, troubleshooting and repairing facility equipment on all systems. Individuals are expected to demonstrate technical expertise in HVAC trade and be multi-skilled in others (Electrical, Piping/Plumbing, Central Utility Plant Operations) in order to successfully complete daily/weekly work assignments. Responsibilities will include, but not be limited to: • Perform maintenance, monitoring repairs to the Mechanical, Plumbing, Structural, Furniture, Fire, Life Safety, and Control systems for the facility to keep facility and building systems up to applicable standards as assigned, • Maintains responsibility for facility services, corrective maintenance, inventory control, general maintenance and technical proficiency., • Maintenance of the equipment will include cleaning, inspecting, calibrating and changing parts to maintain the HVAC systems and associated equipment at optimum performance levels, • Maintain heating equipment, chillers (air and/ or water cooled), DX units, pumps, cooling towers, fan coil units, VAV, and air distribution systems, etc., • Knowledge of the tools, materials, and test equipment used in the installation,, • Maintenance and repair of air conditioning/refrigeration HVAC control systems., • Install, maintain, and repair HVAC controls, including DDC, pneumatic, electric, and electronic controls., • Troubleshoots and repairs HVAC/BAS control problems, including dampers, coils, HVAC steam related controls, air handling equipment, and all types of valves., • Adjusts and calibrates pneumatic/electronic devices to balance all HVAC systems., • Inspects and services controls on a scheduled basis., • Responds to service calls and troubleshoots problems., • Prepares estimates for the repair and/or installation of new Mechanical, Electrical and Plumping systems and makes recommendations for such repairs and services., • Troubleshoots and tests controls using test gauges, amp meters, hydro thermographs, and computers., • Repair equipment and perform corrective maintenance in assigned programmatic area(s)., • Inspect and test equipment / systems to ensure that technical integrity is maintained and if necessary, proposes appropriate corrective action., • Review pertinent technical manuals to remain current with technology and electrical safety codes., • Work indoors & outdoors in the installation and maintenance of a wide - array of technical equipment; use of ladders, safety equipment and ability to navigate rooftops and tight spaces may be required, • Applies technical knowledge to perform simple or routine tasks following detailed instructions., • Receives technical guidance, as required, from supervisor or higher-level technician., • Five (5) years of commercial HVAC/R journeyman level experience., • Communication skills required to interface and coordinate with other technicians., • Must hold EPA Universal level certification per Section 608 of the Clean Air Act., • Must hold NATE, HVAC Excellence Professional/Industry, or UA Star Mastery certification., • Experience setting up and managing BAS schedules, set points, and alarms., • Experience with general RCM practices and procedures., • Capable of performing physical labor including, walking, standing, lift up to 40lbs, pulling, climbing up and down ladders and agility/dexterity to perform duties assigned., • Must be able to successfully pass a government background investigation Preferred Experience & Skills • Familiarity with Niagara, • Skills in Maximo or CMMS Required Education • High School Diploma of GED Equivalent

Job Description Commercial HVAC/R Technician Are you a highly skilled and experienced HVAC/R Technician ready to apply your expertise to critical federal facilities? Join a leading firm dedicated to optimizing real estate performance, facility operations, and workforce outcomes by seamlessly connecting technology, buildings, and people. We are seeking a dedicated HVAC/R Technician to join our facilities engineering program, focusing on the operation, maintenance, troubleshooting, and repair of essential facility equipment and systems. If you're passionate about ensuring high-performing, future-ready environments and are ready to contribute your multi-skilled talents to a rapidly growing, integrity-driven team, we invite you to build something great with us! What's in it for you? * Competitive Compensation: Earn between $30-$35 per hour, recognizing your valuable expertise and contributions. * Comprehensive Benefits Package: We invest in your well-being with a robust benefits offering, including: * Medical & Rx coverage * Dental and Vision insurance * Flexible Spending Accounts (FSA) * A strong 401(k) Retirement Plan to help secure your future. * Life Insurance/AD&D, Long Term Disability, and Short-Term Disability for added security. * Generous Paid Time Off (PTO) and Holiday Pay to ensure work-life balance. * Impactful Work: Contribute directly to optimizing federal and commercial assets, enhancing mission success, and creating high-performing environments. * Growth-Oriented Culture: Join a rapidly growing team where individual strengths are thoughtfully aligned with team needs, fostering long-term success and career development through tools like the Predictive Index. * Commitment to Giving Back: Be part of an organization with a growing philanthropy program focused on gratitude, giving back, partnerships, and mentorship within communities. Key Responsibilities: * Comprehensive System Maintenance & Repair: Perform essential maintenance, monitoring, and repairs across Mechanical, Plumbing, Structural, Furniture, Fire, Life Safety, and Control systems to ensure facilities and building systems meet applicable standards. * HVAC System Optimization: Maintain, inspect, calibrate, and replace parts for heating equipment, chillers (air and/or water-cooled), DX units, pumps, cooling towers, fan coil units, VAVs, and air distribution systems to ensure optimum performance. * Advanced Controls Management: Install, maintain, and repair various HVAC controls, including DDC, pneumatic, electric, and electronic systems, and expertly troubleshoot and repair HVAC/BAS control problems. * Troubleshooting & Diagnostics: Efficiently troubleshoot and test controls using specialized equipment like test gauges, amp meters, hydro thermographs, and computers, addressing service calls promptly. * Corrective Maintenance & Quality Assurance: Perform corrective maintenance on equipment, inspect, and test systems to maintain technical integrity, proposing corrective actions when necessary. * Technical Preparedness & Safety: Remain current with technology and electrical safety codes by reviewing technical manuals. Work safely indoors and outdoors, navigating rooftops and tight spaces, utilizing ladders and safety equipment. * Operational Support & Reporting: Maintain responsibility for facility services, corrective maintenance, and inventory control. Prepare estimates for M.E.P. (Mechanical, Electrical, Plumbing) system repairs/installations and make recommendations for such services. What We're Looking For: * Extensive HVAC/R Expertise: A minimum of five (5) years of commercial HVAC/R journeyman level experience. * Industry Certifications: Must hold EPA Universal level certification per Section 608 of the Clean Air Act, and either NATE, HVAC Excellence Professional/Industry, or UA Star Mastery certification. * BAS & RCM Proficiency: Demonstrated experience in setting up and managing BAS (Building Automation System) schedules, set points, and alarms, along with experience in general RCM (Reliability-Centered Maintenance) practices and procedures. * Physical Capability: Capable of performing physical labor, including walking, standing, lifting up to 40lbs, pulling, climbing up and down ladders, and possessing the agility/dexterity to perform assigned duties. * Communication & Collaboration: Strong communication skills are essential for effective interface and coordination with other technicians and team members. * Government Clearance: Must be able to successfully pass a government background investigation. * Educational Foundation: High School Diploma or GED Equivalent is required. Graduation from an apprentice program or trade school is preferred. * Preferred Skills: Familiarity with Niagara and skills in Maximo or other CMMS (Computerized Maintenance Management Systems) are a plus. Ready to connect technology, buildings, and people? If you're a skilled HVAC/R Technician looking to join a leading team that values innovation, integrity, and impact, we encourage you to apply! Equal Employment Opportunity (EEO) Statement: We are an equal opportunity employer and value diversity at our company. We do not discriminate on the basis of race, religion, color, national origin, gender, sexual orientation, age, marital status, veteran status, or disability status.

Job DescriptionDescription: Company Introduction: Lighthouse Restoration & Construction is a full-service disaster cleanup and property damage restoration company. We specialize in fire, water, wind, mold, and other disaster property recovery services in the Farmingdale, NY area. Lighthouse Restoration & Construction is privately owned and locally operated in Farmingdale, NY. We are seeking a dedicated and skilled Restoration Technician to join our team. The ideal candidate will play a crucial role in restoring properties affected by various types of damage, including water, fire, and asbestos. This position requires a hands-on approach to effectively utilize tools and techniques necessary for restoration while ensuring high-quality service and customer satisfaction. Duties • Perform water damage restoration tasks, including extraction, drying, and dehumidification., • Execute fire restoration processes, including smoke damage cleanup and structural repairs., • Utilize hand tools and power tools safely and effectively for various restoration projects., • Conduct carpet cleaning and other cleaning services as needed to restore properties to their original condition., • Assist in asbestos abatement procedures while adhering to safety regulations., • Maintain a clean work environment and ensure all equipment is properly stored and maintained., • Collaborate with team members to assess damage and develop restoration plans tailored to each project., • Previous experience in the restoration industry is preferred but not mandatory; we are willing to train the right candidate., • Familiarity with hand tools, power tools, and cleaning equipment is essential., • Knowledge of water damage restoration techniques, fire restoration processes, and asbestos abatement practices is a plus., • Strong attention to detail with a commitment to delivering clean and high-quality results., • Ability to work independently as well as part of a team in a fast-paced environment.

Property Damage Estimator / Insurance & Construction Expert Location: New York Tri-State Area Vehicle Required United Public Adjusters & Appraisers, Inc. is looking for a full-time Construction Insurance Property Damage Estimator to join our growing team. We need a boots-on-the-ground professional who can accurately evaluate structural damage and prepare insurance-compliant repair estimates for both residential and commercial properties. This is a critical role in helping our clients recover from property damage due to fire, water, storms, and more. You’ll be the eyes in the field—inspecting properties, spotting hidden damages, and producing clear, accurate scopes of work that support the claims process. Key Responsibilities • Conduct on-site property inspections across the Tri-State area (NY, NJ, CT), with occasional travel outside the region as needed, • Prepare detailed damage assessments and repair estimates using Xactimate or similar platforms, • Identify code upgrades, hidden damages, and additional scopes often missed by carrier adjusters, • Collaborate with internal team members including public adjusters, contents specialists, and claim managers, • Support claims through documentation, photographs, and expert insights during negotiations, • Participate in joint inspections and adjuster meetings when required Requirements • Minimum 5 years of experience in property damage estimating or a related construction field, • Proficiency with Xactimate (REQUIRED), • Strong understanding of residential and/or commercial construction practices, • Reliable vehicle and valid driver’s license (REQUIRED), • Ability and willingness to travel throughout the Tri-State area—and occasionally beyond, • Excellent organizational and written communication skills, • Professional, compassionate communicator — able to assist property owners during times of loss, • Self-motivated, dependable, and detail-oriented Experience • Field or site: minimum of 5 years, • Advanced Microsoft Excel: 5 years, • Cost Estimating: 5 years Why Join United Public Adjusters? • Be part of a growing, respected firm that advocates for property owners, • Meaningful work helping families and businesses recover from major losses, • Supportive team environment with opportunities for growth, • Competitive compensation based on experience ($90,000 - $130,000 annual range), • Medical benefits, paid holidays, and paid time off, • Full-time Apply Today If you have the construction knowledge, estimating skills, and desire to help others, we want to hear from you.

Job Description • Perform mechanical inspection of product according to documented processes. Includes physical inspection and paperwork inspection to verify conformance to requirements., • Communicate inspection failures, deviations, and non-conformances to Director of QA, • Perform inspections for all incoming and outgoing material, • Follow written instructions provided in company procedures and specifications, • Review batch records and ensure compliance to the associated procedure, documentation, specs, etc., • Perform mechanical inspection of product according to documented processes. Includes physical inspection and paperwork inspection to verify conformance to requirements (i.e. correct process performed, paint thickness is acceptable per customer requirements, temper verification by processor proves acceptable, etc.)., • Able to interpret engineering drawings, specifications, purchase orders, statement of work and standards to determine quality status., • Accurately document and maintain associated paperwork and inspection results in a consistent and timely fashion., • Identify/communicate continuous improvement opportunities for the quality program., • Accurately complete all required documentation, • Perform inspections for all incoming and outgoing material, • Perform measurement and final visual inspection Qualifications: • 3 - 5 years experience in Final and In-Process inspection of aircraft detail parts and structural assemblies- a plus, • Associates degree or equivalent education and work experience, • Knowledge of calibration of inspection tools - Will Train, • Knowledge of measuring tools and proficient in reading blueprints a plus Job Posted by ApplicantPro

Job DescriptionStructural Design Engineer My name is Bill Stevens, and I have a new full time Structural Design Engineer opportunity available for a major firm located in North Babylon, Long Island that could be of interest to you, please review my specification below. This position will be paying a fulltime salary of $140,000 - $160,000 and an outstanding benefits package. Responsibilities: Primary responsibility is for structural design and analyses of commercial and industrial structures and facilities located on Suffolk Long Island, working in conjunction with other engineers, designers and architects in the firms North Babylon, Long Island office. The ideal candidate will also have responsibility for occasional field inspections. The candidate should have familiarity with Long Island building codes and zoning ordinances. Experience: The ideal candidate should have an engineering education. Professional Engineering (PE) is preferred and at least seven years of practical experience will be considered for this role. The interview process will include an initial telephone or Zoom screening. Please let me know your interest for this position, availability to interview and start for this position along with a copy of your recent resume.

Job Description CNC Programmer The CNC programmer works within the Engineering Department to create and evaluate existing CNC programs for vertical and horizontal lathes, and multi-axis milling machines. Specific Responsibilities: • Ability to create and evaluate and improve existing CNC programs for vertical and horizontal lathes, and multi-axis (4-5 axis) milling machines., • Solid understanding of feeds and speeds for aerospace materials., • Be a team player for all lean activities continuous improvement projects., • Tool selection and process layout on a consistent basis, working with customers to ensure work can be accomplished., • Create shop floor documentation including operation sheets and work instructions, • Must be accustomed to deadlines and accountability, • Experience with complex aerospace parts including milling and turning processes, • Unigraphics NX experience, • Lean manufacturing techniques, • Effective time management skills including multi-tasking, • Ability to read blueprints. Speak and write reports in English., • High attention to detail., • Develop and follow procedures. Benefits: Medical, RX, Hospitalization - 100% Employer paid (Single through Family coverage) Dental - 100% Employer paid (Single through Family coverage) Vision Life Insurance - 100% Employer paid Long Term Disability - 100% Employer paid Paid Time Off, Sick Time, Holidays 401k FSA AFLAC Air Industries Group is an Equal Opportunity Employer Minority / Women / Disability / Veteran / Gender Identity / Sexual Orientation / Age. Job Posted by ApplicantPro Company DescriptionAir Industries Group is an Aerospace and Defense Company that has been supplying flight critical and other sophisticated parts and assemblies to Prime Defense and Commercial aerospace manufacturers for over 50 years. We manufacture and assemble structural parts and assemblies that focus on the safety of flight.Air Industries Group is an Aerospace and Defense Company that has been supplying flight critical and other sophisticated parts and assemblies to Prime Defense and Commercial aerospace manufacturers for over 50 years. We manufacture and assemble structural parts and assemblies that focus on the safety of flight.

Job Description Responsibilities: • Ability to operate machine center working within +/- .0005 tolerances, adjust machines accordingly, • Load tool or replace broken insert and adjust offsets accordingly, • Use of standard tool including Micrometer, Height gauge, etc. Minimum 2+ years of CNC Machinist/Operator experience - Manufacturing Machinery experience in any of the following a Plus: Milling: Mazak, OKK, Niigata Lathes; Mazak, Puma • Ability to read and understand specs and drawings, • Manufacturing experience a PLUS, • Ability to lift up to 50 pounds Night Shift, 5:15pm-3:45am available. 15% night differential added to hourly and overtime rate. Benefits: Medical, RX, Hospitalization - 100% Employer paid (Single through Family coverage) Dental - 100% Employer paid (Single through Family coverage) Vision Life Insurance - 100% Employer paid Long Term Disability - 100% Employer paid Paid Time Off, Sick, Holidays 401k FSA/AFLAC Facility is air conditioned. Position is based in Bay Shore, New York. There is NO Re-Location for this position. Job Posted by ApplicantPro Company DescriptionAir Industries Group is an Aerospace and Defense Company that has been supplying flight critical and other sophisticated parts and assemblies to Prime Defense and Commercial aerospace manufacturers for over 50 years. We manufacture and assemble structural parts and assemblies that focus on the safety of flight.Air Industries Group is an Aerospace and Defense Company that has been supplying flight critical and other sophisticated parts and assemblies to Prime Defense and Commercial aerospace manufacturers for over 50 years. We manufacture and assemble structural parts and assemblies that focus on the safety of flight.

Job Description • Perform mechanical inspection of product according to documented processes. Includes physical inspection and paperwork inspection to verify conformance to requirements., • Communicate inspection failures, deviations, and non-conformances to Director of QA, • Perform inspections for all incoming and outgoing material, • Follow written instructions provided in company procedures and specifications, • Review batch records and ensure compliance to the associated procedure, documentation, specs, etc., • Perform mechanical inspection of product according to documented processes. Includes physical inspection and paperwork inspection to verify conformance to requirements (i.e. correct process performed, paint thickness is acceptable per customer requirements, temper verification by processor proves acceptable, etc.)., • Able to interpret engineering drawings, specifications, purchase orders, statement of work and standards to determine quality status., • Accurately document and maintain associated paperwork and inspection results in a consistent and timely fashion., • Identify/communicate continuous improvement opportunities for the quality program., • Accurately complete all required documentation, • Perform inspections for all incoming and outgoing material, • Perform measurement and final visual inspection Qualifications: • 3 - 5 years experience in Final and In-Process inspection of aircraft detail parts and structural assemblies- a plus, • Associates degree or equivalent education and work experience, • Knowledge of calibration of inspection tools - Will Train, • Knowledge of measuring tools and proficient in reading blueprints a plus Job Posted by ApplicantPro Company DescriptionAir Industries Group is an Aerospace and Defense Company that has been supplying flight critical and other sophisticated parts and assemblies to Prime Defense and Commercial aerospace manufacturers for over 50 years. We manufacture and assemble structural parts and assemblies that focus on the safety of flight.Air Industries Group is an Aerospace and Defense Company that has been supplying flight critical and other sophisticated parts and assemblies to Prime Defense and Commercial aerospace manufacturers for over 50 years. We manufacture and assemble structural parts and assemblies that focus on the safety of flight.

Job Description Position Summary The Manufacturing Engineer will work within the Engineering Department to create and evaluate existing manufacturing processes for vertical and horizontal lathes, and multi-axis milling machines. Responsibilities • Develop cost effective manufacturing process to support 4-5 axis machining centers, • Design cost effective and quick changeover manufacturing fixtures and tooling, • Create shop floor documentation including operation sheets and work instructions, • Implement cost reduction initiatives utilizing Lean Manufacturing techniques, • Initiate corrective actions to floor processes, • Cost estimating and quoting, • Participation in lean and continuous improvement events Qualifications: • Experience with Aerospace materials, • Proficient with Unigraphics NX4-5, CAM and 3D modeling, • Must be accustomed to deadlines and accountability, • Experience with complex aerospace parts including milling and turning processes, • Lean manufacturing techniques, • Effective time management skills including multi-tasking, • Ability to read blueprints. Speak and write reports in English., • High attention to detail., • Develop and follow procedures., • 3+ years experience Job Posted by ApplicantPro Company DescriptionAir Industries Group is an Aerospace and Defense Company that has been supplying flight critical and other sophisticated parts and assemblies to Prime Defense and Commercial aerospace manufacturers for over 50 years. We manufacture and assemble structural parts and assemblies that focus on the safety of flight.Air Industries Group is an Aerospace and Defense Company that has been supplying flight critical and other sophisticated parts and assemblies to Prime Defense and Commercial aerospace manufacturers for over 50 years. We manufacture and assemble structural parts and assemblies that focus on the safety of flight.

Job DescriptionStructural Designer My name is Bill Stevens, and I have a new full time Structural Designer opportunity available for a major firm located in North Babylon, Long Island that could be of interest to you, please review my specification below. This position will be paying a fulltime salary of $140,000 - $160,000 and an outstanding benefits package. Responsibilities: Primary responsibility is for structural design and analyses of commercial and industrial structures and facilities located on Suffolk Long Island, working in conjunction with other engineers, designers and architects in the firms North Babylon, Long Island office. The ideal candidate will also have responsibility for occasional field inspections. The candidate should have familiarity with Long Island building codes and zoning ordinances. Experience: The ideal candidate should have an engineering education. Professional Engineering (PE) is preferred and at least seven years of practical experience will be considered for this role. The interview process will include an initial telephone or Zoom screening. Please let me know your interest for this position, availability to interview and start for this position along with a copy of your recent resume.

Job Description Skills Required: • Familiar with Walters cutter grinders, • The use of hand tools and electrical to shape, form and assemble metal products, • Set up, operate and maintain all grinding tools, • Study blueprints, work orders or machining instructions to determine product specs and tool requirements., • Inspect and measure all finished work pieces to determine conformance to specs Excellent Benefits and Competitive Hourly rate plus Overtime. Air Conditioned Facility. Medical, RX, Hospitalization - 100% Employer paid (Single through Family coverage) Dental - 100% Employer paid (Single through Family coverage) Vision Life Insurance - 100% Employer paid Long Term Disability - 100% Employer paid Paid Time Off Holidays 401k FSA/DDC AFLAC Job Posted by ApplicantPro Company DescriptionAir Industries Group is an Aerospace and Defense Company that has been supplying flight critical and other sophisticated parts and assemblies to Prime Defense and Commercial aerospace manufacturers for over 50 years. We manufacture and assemble structural parts and assemblies that focus on the safety of flight.Air Industries Group is an Aerospace and Defense Company that has been supplying flight critical and other sophisticated parts and assemblies to Prime Defense and Commercial aerospace manufacturers for over 50 years. We manufacture and assemble structural parts and assemblies that focus on the safety of flight.

Job DescriptionDescription: Company Introduction: Lighthouse Restoration & Construction is a full-service disaster cleanup and property damage restoration company. We specialize in fire, water, wind, mold, and other disaster property recovery services in the Farmingdale, NY area. Lighthouse Restoration & Construction is privately owned and locally operated in Farmingdale, NY. Job Description: We are seeking a full-time Reconstruction Project Manager experienced in the water, fire, and mold restoration industry. This individual will be responsible for leading, budgeting, scheduling, and successfully managing multiple residential and commercial jobs through the reconstruction phase. The ideal candidate will be proficient in Xactimate, the industry-standard estimating software, to ensure accurate scope and budget management. The role requires strong knowledge of restoration processes and the ability to handle mitigation and reconstruction projects efficiently, maintaining communication with all stakeholders, including customers, estimators, contractors, and administrative staff. This position is ideal for someone self-motivated, detail-oriented, organized, and skilled in problem-solving and conflict resolution. Top Responsibilities: • Manage multiple projects simultaneously, ensuring quality and timeline adherence., • Perform inspections of damaged properties to assess reconstruction needs., • Create detailed, accurate estimates in Xactimate for insurance claims and out-of-pocket projects., • Collaborate with mitigation teams to ensure a smooth transition from cleanup to reconstruction., • Communicate effectively with property owners, insurance adjusters, and internal staff., • Oversee subcontractors and ensure work aligns with contract specifications. Requirements: • College Degree (2- or 4-year) or 3-5 years of experience in construction management or restoration services., • Proficiency in Xactimate estimating software is required., • Strong understanding of water, fire, and mold restoration processes., • Excellent customer service and communication skills., • Collaborative and team-oriented mindset., • Ability to manage multiple projects with varying scopes and deadlines., • Comfortable using technology such as smartphones, tablets, and computers., • Physically capable of standing for long periods and lifting 50 lbs., • IICRC Certifications (e.g., Water Damage Restoration Technician, Applied Structural Drying) are highly desirable., • Previous experience managing restoration projects involving insurance claims., • Familiarity with OSHA safety standards and local building codes.

Job Description Join our team and work with the world's premier aerospace and ground power company for over 50 years! We are an aerospace and defense company. We design and manufacture structural parts and assemblies that focus on flight safety. Qualifications: • Assemble various mechanical devices using drawings, work instructions, operation sheets, and/or schematics., • Electronic knowledge and experience required, • Perform trouble-shooting tasks as required., • 2+ years of assembly experience OR have demonstrated knowledge, skills and abilities to perform assembly tasks Excellent Benefits and Competitive Hourly rate plus Overtime: Medical, RX, Hospitalization - 100% Employer paid (Single through Family coverage) Dental - 100% Employer paid (Single through Family coverage) Vision Life Insurance - 100% Employer paid Long Term Disability - 100% Employer paid Paid Time Off Holidays 401k FSA/DDC AFLAC Email resume: Company DescriptionAir Industries Group is an Aerospace and Defense Company that has been supplying flight critical and other sophisticated parts and assemblies to Prime Defense and Commercial aerospace manufacturers for over 50 years. We manufacture and assemble structural parts and assemblies that focus on the safety of flight.Air Industries Group is an Aerospace and Defense Company that has been supplying flight critical and other sophisticated parts and assemblies to Prime Defense and Commercial aerospace manufacturers for over 50 years. We manufacture and assemble structural parts and assemblies that focus on the safety of flight.

Lenox Hill Heart and Lung/Northwell Health is offering one-year advanced interventional cardiology fellowships (non-ACGME accredited) in structural heart disease beginning July 1, 2026. This multidisciplinary fellowship provides comprehensive training in transcatheter therapies and in advanced echoc

AdaptHealth Opportunity Apply Today!.At AdaptHealth we offer full-service home medical equipment products and services to empower patients to live their best lives out of the hospital and in their homes.We are actively recruiting in your area.If you are passionate about making a profound impact on

Assembler Job Duties: Prepares work to be accomplished by studying assembly instructions, blueprint specifications, and parts lists; gathering parts, subassemblies, tools, and materials.

Building Maintenance Technician.Newmark's comprehensive suite of services and products is uniquely tailored to each client, from owners to occupiers, investors to founders, and startups to blue-chip companies.Combining the platform's global reach with market intelligence, Newmark provides superior s

Assembler Job Duties: Prepares work to be accomplished by studying assembly instructions, blueprint specifications, and parts lists; gathering parts, subassemblies, tools, and materials.

Multi-Site Maintenance Technician.At Trinity Property Consultants, your expertise is the key to our continued success.Join us and become an essential part of an organization that values your skills and is committed to your professional growth.Guided by our core values of innovation, teamwork, excell

Civil Engineer Job Duties: Completes construction projects by preparing engineering design and documents and confirming specifications.Designs construction projects by studying project concep

Composite And Electrometric Material Assembler.We are seeking a skilled and outgoing individual to join our client as a Composite and Electrometric Material Assembler on a temp to hire basis.In this role, you will be responsible for assembling composite and electrometric materials with complex fixtu

Publicly Traded US Company, NASDAQ (TTMI) - Top-5 Global Printed Circuit Board Manufacturer.RF") components and RF microwave/microelectronic assemblies, and quick-turn and technologically advanced printed circuit boards ("PCBs").TTM stands for time-to-market, representing how TTM's time-critical, on

RF) components and RF microwave/microelectronic assemblies, and quick-turn and technologically advanced printed circuit boards (PCBs).TTM stands for time-to-market, representing how TTM's time-critical, one-stop manufacturing services enable customers to shorten the time required to develop new prod

Qualifying degrees: Civil Engineering, Civil Engineering Technology, Construction Engineering, Construction Engineering Technology, Construction Engineering Management, Construction Engineering Management Technology, Geological Engineering, Geotechnical Engineering, Hydraulics Engineering, Materials