Structural jobs in Saratoga Springs, New YorkCreate job alerts

Department/Unit: Post Cardiothoracic Surgery - C8 Work Shift: Day (United States of America) Salary Range: $83,200.00 - $93,184.00 An opportunity to join a high-functioning, dedicated team committed to excellent quality patient care. The post cardiothoracic surgical unit is a specialty unit consisting of patients receiving cardiac surgery, thoracic surgery, cardiac catheterization, structural heart interventional procedures, electrophysiology procedures, and patients that require a higher level of telemetry monitoring. If you are eager to learn, pay close attention to detail, are dedicated to high quality patient care, and enjoy a fast-paced environment, this is the unit for you! We offer room to grow in your nursing practice and welcome all to apply, from new RN graduates to experienced RNs looking to expand their skill set. Advanced skills preferred but not required: Cardiac rhythm interpretation and management, familiarity with vasoactive & antiarrhythmic medications, and management of chest tubes. Job Description • Implements physician orders, administers medications, starts IVs, performs treatments, procedures and special tests, and document treatment as required by company policy and local/state/federal rules and regulations., • Orders, interprets, and evaluates diagnostic tests to identify and assess patients' conditions., • Assesses and evaluates patient needs for, and responses to, care rendered., • Applies sound nursing judgment in patient care management decisions., • Provides primary and emergency care for occupational and non-occupational injuries and illnesses., • Administers over-the-counter and prescription medications as ordered., • Collaborates with the nursing team to create a Plan of Care for all patients., • Directs and guides ancillary personnel and maintain standards of professional nursing. Minimum Qualifications • Graduate of a professional academic nursing program in which a Diploma, Associate Degree or Baccalaureate Degree is conferred, • Must hold current NYS Registered Nurse license, • Obtains and maintains certification in Basic Life Support (BLS) and Advanced Cardiac Life Support (ACLS), • Minimum of 1-3 years of previous clinical RN experience in Med-Surg or Progressive Care, • Excellent communication, prioritization, organizational and time-management skills, • Possesses knowledge of quality concepts, principles, and problem-solving tools and techniques and demonstrates ability to apply in support of departmental and patient care quality improvement. Thank you for your interest in Albany Medical Center! Albany Medical is an equal opportunity employer. This role may require access to information considered sensitive to Albany Medical Center, its patients, affiliates, and partners, including but not limited to HIPAA Protected Health Information and other information regulated by Federal and New York State statutes. Workforce members are expected to ensure that: Access to information is based on a “need to know” and is the minimum necessary to properly perform assigned duties. Use or disclosure shall not exceed the minimum amount of information needed to accomplish an intended purpose. Reasonable efforts, consistent with Albany Med Center policies and standards, shall be made to ensure that information is adequately protected from unauthorized access and modification.

Job Description DUTIES: Under general supervision in the Engineering Department, to do designing of minor and major construction projects of all types, to prepare specifications and estimates and to prepare and maintain related diagrams, maps and records, doing drafting work as required, and perform such duties as: • Prepare architectural studies of minor projects., • Prepare general layout and final construction drawings for projects of all types., • Develop the design of major and minor component parts of electrical, mechanical or structural projects., • Prepare assembly and detail designs of electrical, mechanical and structural projects, designing dimensional details to avoid interference with equipment and structural members., • Make engineering calculations as required to determine the adequacy of design., • Calculate, plot, compute closure and adjust field survey data; compute areas and prepare land maps and records., • Prepare bills of material, conduit and cable schedules for major and minor parts of construction projects., • Assist in the preparation of cost estimates, specifications, budget request, authority for expenditure papers, etc., • Make engineering studies, analyses, reports and calculations of moderate difficulty relating to the design, protection, operation and maintenance of projects and assist in more complex work of this nature., • Make field inspections of construction and special tests as required., • Education in applicable engineering subjects., • Training and working knowledge of CAD systems, • Five years' experience, including two years in suitable lower grade design work; (Part college work will be given credit, as appropriate, toward the required experience time.), • Detailed knowledge of materials and equipment used in construction., • Knowledge of design fundamentals and required mathematics., • Knowledge of Company accounting, budget and property record procedures, as applicable. Company DescriptionBrookfield is a leading global investment firm with over $1 trillion of assets under management. We invest on behalf of institutions and individuals around the world with the goal of helping them to create long-term, sustainable wealth. Our origin as owner/operators of high-quality businesses allows us to leverage our unique operational expertise to grow the businesses we own on behalf of our clients. We put our own capital to work alongside our partners’ in nearly every transaction, ensuring strong alignment of interests.Brookfield is a leading global investment firm with over $1 trillion of assets under management. We invest on behalf of institutions and individuals around the world with the goal of helping them to create long-term, sustainable wealth.\r\n\r\nOur origin as owner/operators of high-quality businesses allows us to leverage our unique operational expertise to grow the businesses we own on behalf of our clients. We put our own capital to work alongside our partners’ in nearly every transaction, ensuring strong alignment of interests.

Job Description Hazen is seeking summer/fall/year-round interns for a variety of water-related assignments in our Saratoga Springs office. The successful candidate will be involved in a wide range of drinking water, wastewater, stormwater, and/or conveyance projects. This opportunity includes working within one (or more) of Hazen's discipline groups, which include: CAD/BIM, civil, electrical, HVAC/plumbing/fire protection, instrumentation and controls, process mechanical, structural, or architectural. Responsibilities include integrating with design teams from initial studies and conceptual design through construction of pipelines, pump stations, and/or treatment facilities and attending field investigations and site visits. Why Hazen and Sawyer: • Founded in 1951 by the son of Allen Hazen (developer of the Hazen-Williams equation), we are an employee-owned company with a singular focus on "all things water.", • Our work includes planning, design, and oversight of construction of environmental infrastructure – for water, wastewater, and stormwater management., • We foster a work environment low on bureaucracy and high in creativity., • We recruit talented professionals, provide them with challenging, interesting, and creative assignments, and furnish them with the tools they need to succeed., • We currently have over 2,000 employees in 70+ offices throughout the United States, Latin America, Canada, and the UK., • Participate in fieldwork, site visits (mostly in-state) and potential client meetings; capable of walking around outdoors in xxx environments-may want to provide any physical specific requirements, • Assist in preparing engineering deliverables, including sampling studies, condition assessments, process modeling, hydraulics, and design reports, • Work directly with experienced engineering team providing mentoring opportunities to learn and develop, • Manage data for process modeling and design, • Coordinate with manufacturers and vendors to select equipment, • Support multiple projects from planning through construction, • Currently enrolled in an ABET-accredited Bachelor’s/Master’s degree in environmental, civil, chemical, or mechanical engineering (can add specific discipline to the role i.e. construction management, electrical, applied science), • Strong written & verbal communication skills, • Self-motivated, • Strong organizational skills with attention to detail, • Ability to work independently and in group settings, • Skilled in AutoCAD, Bluebeam, Civil 3D, GIS, • Strong interest in the water/wastewater industry, • Prior experience in the water/wastewater industry, • Starting pay range for this position depends on skills, experience, education and geographical location, • Professional guidance and career counseling, • Direct mentorship with experienced engineers, • Experience with a variety of disciplines within the water industry, • Exposure to the environmental consulting industry, • Potential opportunity for full-time employment upon graduation

Job Description Navarro Research and Engineering is recruiting for a Mechanical Engineer in West Milton, NY. This position requires an active DOE L clearance or DOD equivalent in order to be considered. Navarro Research & Engineering is an award-winning federal contractor dedicated to partnering with clients to advance clean energy and deliver effective solutions for complex challenges in the nuclear and environmental fields. Joining Navarro means being a part of an exceptional team committed to quality and safety while also looking for innovative strategies to create value for the client’s success. Headquartered in Oak Ridge, Tennessee, Navarro has active programs in place across the nation for DOE/NNSA, NASA, and the Department of Defense. The Naval Nuclear Laboratory develops advanced naval nuclear propulsion technology for the safety and reliability of our Navy's submarine and aircraft fleet. Our company is looking for an experienced Mechanical Engineer to join our team as part of the Propulsion Plant Team Trainer (PPTT) project, which is a multi-site organization engaged in the design, production, testing, and delivery of advanced training simulators. The successful candidate will: - Collaborate with multidisciplinary engineers across multiple locations - Review and disposition Supplier mechanical design submittals to validate designs based on technical requirements - Interface with stakeholders to ensure project objectives are satisfied - Review static structural analyses of designs Requirements • This position requires an active DOE L clearance or DOD equivalent in order to be considered., • Bachelor of Science in Mechanical Engineering from an accredited college or university -, • Minimum of 3 years of work experience as a Mechanical Engineer Desired Knowledge, Skills, and Abilities • Experience with SolidWorks or equivalent 3D modeling software - Experience with Model Based Design, • Experience supporting design reviews and technical interchanges with Suppliers, • Experience reviewing static structural analyses (e.g. FEA) -Ability to review, understand, and apply relevant engineering codes and standards (e.g. ASME, AWS) - Experience with Design for Manufacturability and Geometric Dimensioning & Tolerancing (GD& T), • Experience reviewing designs for joining processes (e.g. welding), • Strong communication and collaboration skills, • Ability to think creatively and make recommendations to senior project personnel, • Proficiency with Microsoft Office Products Benefits Due to the nature of the government contract requirements and/or clearances requirements, US citizenship is required. Navarro is an equal-opportunity employer. All qualified applicants will receive consideration for employment without regard to sex, race, religion, color, national origin, age, disability, veteran’s status or any classification protected by applicable state or local law. EEO Employer/Vet/Disabled Compensation: $90,000-$160,000 annually

Job DescriptionJob description Senior Mechanical Engineer: About Espey: Come join us at Espey, where we're shaping the future. As industry leaders in manufacturing high-quality power conversion solutions, we specialize in serving mission-critical military and rugged industrial sectors for use in the most harsh & severe environments. With over 90 years of experience, Espey is synonymous with innovation and reliability, providing essential power supplies and transformers that ensure the safety of our military personnel. As a publicly traded company on the NYSE (ESP), we're committed to excellence across all facets of our operation, from design and development to testing and manufacturing. Located in the vibrant city of Saratoga Springs, NY, just 30 minutes from the state capital and within easy reach of major metropolitan centers like New York City, Boston, and Montreal, Espey offers a unique opportunity to be part of something extraordinary. If you're ready to shape the future and embark on a fulfilling career adventure, join us at Espey. Let's build together! About the job: Embark on a new career journey to shape the future as a Mechanical Engineer III, where you will be part of a team crafting transformer and power systems destined for military and industrial products. Mechanical Engineers at Espey are responsible for designing, developing, testing, and overseeing the production of mechanical systems and components. They collaborate with multidisciplinary teams to innovate solutions and ensure that projects meet technical and functional requirements. Unlock your engineering skills and production finesse by orchestrating the creation of products that protect today’s military. Senior Mechanical Engineer: Key Responsibilities including, but not limited to: · Responsible for the mechanical design of military grade systems including power transformers and other magnetic assemblies. · Research, design, analyze and perform electro-mechanical layouts for high and low voltage electronic military and industrial equipment · Design systems using SOLIDWORKS solid modeling software & ensure thermal and structural integrity of designs through extensive analysis using SOLIDWORKS SIMULATION FEA and SOLIDWORKS FLO SIMULATION CFD software · Participate & lead design reviews and quality assurance activities to maintain high standards of product quality and reliability. · Implement cooling designs utilizing liquid, natural convection, and forced convection · Research and analyze data such as customer design proposal and specifications to determine feasibility of design or application. · Responsible for the creation of component and assembly drawings, , bills of material, mechanical test procedures, and other documentation critical to the design, manufacture, and test of our products. · Design and develop custom fixtures to assist in manufacturing, testing or qualification of units · Plan and coordinate environmental testing, such as design verification or qualification · Collaborate with cross-functional teams (such as electrical engineers, manufacturing engineers, and product managers) to ensure project milestones and deadlines are met. · Identify opportunities for design optimization, cost reduction, and process improvement. Required Qualifications: · Bachelor’s Degree in Mechanical Engineering or related field · Minimum 5 years’ experience as a mechanical engineer in an industrial setting · Minimum 5 years’ experience in the following categories: Structural frame design, electronics packaging, thermal analysis, structural analysis, & drafting · Essential Functions include: frequently required to sit, talk, & hear. Occasionally required to stand, walk, crawl, and lift up to 50 pounds. Preferred Qualifications: · Deep knowledge of mechanical engineering practices, theory, application, & design experience · Proficient in use of 3D model software SolidWorks (or equivalent), Thermal/Structural FEA, and Mechanical Design of Enclosures and Electronic Assemblies. · Comfortable navigating complexity, troubleshooting unique problems, attention to detail, critical thinking, innovation, and independence balanced with cross-functional partnerships, bias for action, & strong written and verbal communication skills · Knowledge of basic electrical theory with a focus on packaging of electrical components, with magnetic theory a plus · Deep knowledge of thermodynamics with a focus on component cooling · Possess a strong understanding of operations management, production planning, customer contracts, supply chain, engineering, and manufacturing principles · Experience in working in manufacturing or production environments · Ability to write reports, business correspondence, and procedure manuals. · Experience with magnetic assemblies such as transformers and inductors, or MILSPEC products for airborne, ground mobile, or Naval applications · Experience with high reliability equipment and mechanical qualification such as shock and vibration Perks at Espey: · Pay Range $80,000 - $120,000 depending on depth of skills and experience · Four – day work week · Onsite required (Relocation provided) · 401(k) and Employee Stock Ownership Plan (ESOP) · Medical, Dental, Vision, & Life insurance with Employee assistance program · Flexible spending account & Health savings account · Tuition reimbursement · Watch your projects come to life! Direct engagement throughout the product lifecycle An Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, or protected veteran status and will not be discriminated against on the basis of disability. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions and expectations. Job Type: Full-time Pay: $80,000.00 - $120,000.00 per year Benefits: • 401(k), • 401(k) matching, • Dental insurance, • Employee assistance program, • Flexible spending account, • Health insurance, • Health savings account, • Life insurance, • Paid time off, • Retirement plan, • Tuition reimbursement, • Vision insurance Schedule: • 10 hour shift Application Question(s): • Are you willing and able to work onsite at the Espey Manufacturing site in Saratoga Springs, NY? Education: • Bachelor's (Required) Experience: • industrial or manufacturing: 5 years (Required), • Mechanical engineering: 5 years (Required) Work Location: In person

Job Description Hazen is seeking candidates for a principal structural engineer for full-time employment in our Buffalo, NY or Sarasota Springs, NY locations. Candidates must have 5 to 15 years of relevant structural design experience. The position will include a wide range of projects to include planning, design, permitting, and construction of structures in the ‘water space’ (i.e. drinking water, wastewater, water resources, conveyance, canals and ports). Client development, project management, technical leadership and staff mentoring opportunities will be possible for the selected individual across Hazen’s Northeast and Midwest businesses. Primary focus will be projects in Upstate NY and PA. Fieldwork and site visits from planning through construction may be required with occasional travel. Responsibilities: • Technical Engineering Leadership., • Business Development, • Prospective applicants should have 5 - 15 years of structural design experience. Prospective applicants must also have a Professional Engineering (PE) license, or ability to obtain such within 6-months, in the State of New York., • This position will require skills in the analysis, design, and construction of environmental structures such as Industrial Buildings, Pump Stations, Process Basins, and Treatment Facilities. The selected individual will lead the structural design and construction administration responsibilities for major projects usually involving upgrades to wastewater, drinking water and reclaimed water treatment plants., • Experience in design and construction of structural steel, reinforced concrete, reinforced masonry, and aluminum is required as well as knowledge of applicable building codes, design standards including ACI, AISC, ASCE, and structural analysis and design software., • Candidates must be effective communicators and be able to successfully work in a multi-discipline team environment.

Job Description Hazen and Sawyer is seeking a Construction Inspector to support the construction of water and wastewater treatment facilities and infrastructure located in the greater NYC Metro area and Springfield, MA. The selected candidate will inform the CM team by observing and reporting on construction activities, effectively coordinating and collaborating with the project team members, and providing documentation and inspection activities for various water and wastewater facilities and infrastructure. Responsibilities include: • Review and interpret project drawings, specifications and work plans to verify contractor compliance;, • Conduct on-site observation, monitoring, inspection, and evaluation of construction activities;, • Verify and track work in accordance with approved shop drawing submittals;, • Observe contractor performance and compliance with safety requirements;, • Prepare daily reports, verify material quantities, Time and Material (T&M) records and review contractor pay applications;, • Monitor construction contractor’s adherence to project schedule and sequence of activities related to daily field observations;, • Maintain project redline and as-built drawings;, • Coordinate and communicate effectively with the CM Project team, multi-discipline engineering teams, contractors and third-party inspection/testing firms;, • Assist and coordinate with project start-up, testing checkout and training activities;, • Minimum 5 years of construction / construction observation experience;, • Familiarity with construction methods typical of civil, structural, mechanical and/or electrical engineering work;, • Excellent verbal, written, and interpersonal skills, organizational and problem-solving skills;, • Experience working on and collaborating with multidisciplinary teams, • Willing to travel and stay local to projects in the NYC Metro area as needed., • Proficiency with Microsoft Office Suite, Microsoft Project and related PC software packages used on construction projects, • Experience in municipal water and wastewater or similar industry construction inspection preferred

Job Description LaBella is currently hiring for a Senior Structural Engineer in our Ballston Spa, NY office. The Structures Discipline provides structural engineering services with emphasis on new design, repair, and rehabilitation of constructed works, as well as investigation and performance evaluation. Individual must be able to work independently, as well as part of multi-discipline teams. Duties: • Serves as a Lead Engineer who supervises a team of structural engineers, designers and technicians in production of structural construction documents including drawings, specifications, bidding and construction administration for large complex projects including calculation and document reviews., • Develops cost effective system layouts as well as performing calculations and coordination with other disciplines., • Performs site visits for documentation and cost estimating of existing systems and building conditions., • Prepares technical specifications., • Reviews and evaluates shop drawings and product submittals., • Visits construction sites to inspect work in progress or completed., • Maintains and manages budgets for projects including hours and resources., • Maintains client relationships, • Prepares Engineering Reports., • Completes complex and specialty types of design., • Stays abreast of technical advancements in respective field and disseminates information to others., • Minimum of 10+ years of experience working in the consulting engineering industry., • Strong writing and communication skills., • Demonstrated ability to meet deadlines., • BS in Civil Engineering is required., • A New York State PE license is required., • Revit Experience is a plus., • Project history using computer analysis software experience is essential. Salary Range: $90,000 - $130,000 The specific salary offered may be influenced by a variety of factors including but not limited to the candidate's relevant experience, education, and work location. Benefits Body, mind, and wallet—LaBella’s benefits support a holistic approach to your health and wellness, creating the foundation for physical, mental, and financial well-being. Our benefit offerings cover the must-haves (healthcare and retirement), the just-in-cases (insurances and employee assistance programs), and the cherry-on-tops (fitness reimbursements, year-end incentive pay, and tuition assistance). Visit our website for more details on benefits listed below. • Flexible Work Schedule, • Health/Dental Insurance, • 401k Plan with Employer Match, • Short & Long Term Disability, • Profit Sharing, • Paid Time Off, • Leadership Development Program, • Fitness Reimbursement, • Tuition Reimbursement, • Referral Bonus Program, • Wellness Program, • Team Building Events, • Community Service Events

Job DescriptionKey duties and responsibilities • Surface Preparation: Inspect the newly installed drywall panels, ensuring they are properly fastened and ready for taping. Clean the surface and address any issues like loose drywall or plaster to ensure optimal adhesion., • Apply Tape: Apply paper or fiberglass mesh tape to cover the joints where drywall panels meet to prevent cracking., • Apply Joint Compound: Apply multiple layers of joint compound (also called mud or spackle) over the taped seams, corner beads, and screw holes, using broad knives, or spatulas. Carefully feather out the compound to create a smooth transition between the taped area and the surrounding drywall surface., • Sanding and Finishing: Sand the rough areas, ensuring a smooth, seamless finish. This typically involves several rounds of applying compound and sanding to achieve the desired level of smoothness., • Inspecting and Repairing: Inspect work for imperfections and make any necessary repairs or touch-ups before final inspection; this might also repair existing drywall damage like cracks or holes., • Using Tools and Equipment: Proficient in using a variety of hand tools like taping knives, mud pans, and sanders. For larger jobs, power tools and specialized equipment are also required., • Safety Practices: Must adhere to safety protocols and maintain a clean and organized work environment, including proper tool and material storage. Essential skills and qualities, • Attention to Detail: Achieving a flawless finish requires meticulous attention to detail, ensuring no seams, bumps, or imperfections are visible., • Dexterity: Must have excellent manual dexterity and hand-eye coordination for precision work with tools and applying compounds., • Physical Stamina: The work is physically demanding, involving repetitive motions, working overhead, and standing for extended periods., • Patience: This role involves multiple coats and drying times, requiring patience to achieve a high-quality outcome., • Problem-Solving: Need to be able to identify and resolve issues like uneven surfaces or structural challenges., • Time Management: Efficiently managing time and coordinating with other trades is crucial for meeting project deadlines. This position primarily works indoors, which can range from residential homes to large commercial buildings. The work environment is often dusty, especially during the sanding phases, and may be noisy due to other trades working nearby; workers frequently work on ladders, scaffolding, or even stilts to reach higher areas. They typically work as part of a small crew or independently, to ensure projects are completed efficiently and to high standards. Must have a demanding blend of technical skills, physical stamina, and a strong commitment to quality craftsmanship. The work can be physically demanding, requiring standing, bending, reaching, and lifting heavy materials. We are looking for someone who can work as part of a busy team on our bigger jobs, as well as complete and manage smaller jobs on their own. This role is offered on a full-time basis with the expectation of up to 40 hours of work each week. Shift hours may vary depending on factors such as business hours and staff availability, and reasonable overtime hours may be required if necessary. Preferred: · Minimum 2 years of experience; · Driver’s license (Must have) · Must have own tools · Own car equipped to carry tools and ladders; · A good understanding of workplace health and safety rules and the ability to follow safe working principles; · Ability to liaise with other trades workers, clients, and third parties to ensure construction sites are managed to the highest level;

The post cardiothoracic surgical unit is a specialty unit consisting of patients receiving cardiac surgery, thoracic surgery, cardiac catheterization, structural heart interventional procedures, electrophysiology procedures, and patients that require a higher level of telemetry monitoring. Clinical

Job Description Hazen is seeking candidates for a Sr. Associate position focused on structural and waterways engineering and project management. Candidate will be involved with a wide range of projects to include planning, design, permitting, and construction of structures in the ‘water space’ (i.e. drinking water, wastewater, water resources, conveyance, canals and ports). Candidate shall be capable of supervising junior staff and managing projects. Candidate shall also be able to lead business development activities including preparation of proposals and presentations. The position will include client development, project management, technical leadership and staff mentoring in the Northeast and Midwest. Primary focus will be projects in Upstate NY and PA. Fieldwork and site visits from planning through construction may be required with occasional travel. Responsibilities: • Project Management., • Technical Engineering Leadership., • Business Development., • Prospective applicants must have more than 15 years of structural design experience. Prospective applicants must also have a Professional Engineering (PE) license, or ability to obtain such, in the State of New York. Multiple state registrations are preferred., • This position will require skills in the analysis, design, and construction of environmental structures such as Industrial Buildings, Pump Stations, Process Basins, and Treatment Facilities. The selected individual will lead the structural design and construction administration responsibilities for major projects usually involving upgrades to wastewater, drinking water and reclaimed water treatment plants., • Experience in design and construction of structural steel, reinforced concrete, reinforced masonry, and aluminum is required as well as knowledge of applicable building codes, design standards including ACI, AISC, ASCE, and structural analysis and design software., • Candidates must be effective communicators and be able to successfully work in a multi-discipline team environment.

The post cardiothoracic surgical unit is a specialty unit consisting of patients receiving cardiac surgery, thoracic surgery, cardiac catheterization, structural heart interventional procedures, electrophysiology procedures, and patients that require a higher level of telemetry monitoring. The Clini

Post Cardiothoracic Surgery - C8. The post cardiothoracic surgical unit is a specialty unit consisting of patients receiving cardiac surgery, thoracic surgery, cardiac catheterization, structural heart interventional procedures, electrophysiology procedures, and patients that require a higher level

As a Senior Engineer in Structural Mechanics & Analysis Methods within the Aero-Thermal & Mechanical Systems Organization, you will provide technical leadership and perform research and development in structural mechanics, analysis methods, and related fields. PhD degree in Mechanical Engineering, A

Responsibilities Direct bridge design operations including structural load rating calculations, comprehensive structural analysis, and foundation system design Generate complete design plans, technical specifications, and detailed cost estimates for bridge and transportation infrastructure projects

About NY Creates: NY Creates serves as a bridge for advanced electronics, leads projects that advance R&D in emerging technologies, and generates the jobs of tomorrow.NY CREATES also runs some of the most advanced facilities in the world, boasts more than 3,000 industry experts and faculty, and mana

Collaboration with other Structural PDLs within BC to collectively address issues with Structural resources, workload, technical issues, quality, etc. Engage with the Structural National Practice Lead (NPL) to provide leadership for development of Structural standards (specifications, standard detai

The Senior Structural Engineer has considerable engineering knowledge in their respective field and may provide leadership for their work group based on their extensive experience. The Senior Structural Engineer oversees all phases of a technical project from conception and design to completion, whi

Serves as a Lead Engineer who supervises a team of structural engineers, designers and technicians in production of structural construction documents including drawings, specifications, bidding and construction administration for large complex projects including calculation and document reviews. LaB

Must have a Bachelors of Science Degree in Structural or Civil Engineering with a focus on Structural Engineering. Analysis and design of building/facility structural systems/components in steel, concrete, masonry, wood, etc. Structural Engineering is required.

Minimum 5 years of experience in the structural design and analysis of bridges and other transportation structures. Our Bridge team is looking for a Structural Bridge Engineer in our Albany and Rochester NY offices. The successful candidate will become part of an exciting and dynamic structural grou

Manage structural engineering projects from concept through completion, ensuring accuracy, efficiency, and adherence to deadlines. Conduct structural assessments and site observations to support design recommendations. Bachelor's degree in Civil or Structural Engineering (Master's ).

We are seeking an experienced Structural Project Engineer for bridge and other transportation-related projects to join our consulting firm in Albany, Poughkeepsie, Syracuse, or White Plains, New York. Typical projects include bridge and culvert rehabilitations and replacements, retaining wall design

Must have a Bachelors of Science Degree in Structural or Civil Engineering with a focus on Structural Engineering. Design experience in a wide range of structural materials and project types. We are looking to add a licensed Senior Structural Engineer to our growing team! In this position you will w

The Structural Engineer will be responsible for leading and ensuring all assigned structural projects are completed on time and on budget. You will oversee the quality and accuracy of structural documents, financial and schedule performance, and all client communication. The Engineer monitors multip

With high-level goals provided, leads teams to create structural analyses and designs for reinforced concrete, structural steel, reinforced masonry, and other metal structures of moderate to high complexity to meet client project requirements. Performs structural condition assessments and confined s

Create structural design plans and details in Revit. Provide direction to structural engineers, technicians, and administrative staff. Bachelor’s Degree in civil engineering with a Structural emphasis from an ABET accredited university; Master’s Degree is preferred.

Job Title: Civil/Structural Engineer. We are seeking an experienced Civil/Structural Engineer to join our team. This role involves working on substation projects, focusing on structural analysis and foundation design.

Performing computations for structural analysis and design of bridges, culverts, retaining walls, and other structural components. Proficiency with Microstation, AASHTOWare, MathCAD and other structural engineering software a plus but not required. As a Junior Engineer, you will work under the super

Structural Engineering - Bridge Design. Performs structural analysis and design computations.

The Senior Engineer for Civil/Structural Substation Engineering will be the lead civil/structural engineer for multiple, concurrent high voltage substation projects. Work with subcontractors, other staff engineers and designers to perform all aspects of civil and structural engineering calculations

The Senior Engineer for Civil/Structural Substation Engineering will be the lead civil/structural engineer for multiple, concurrent high voltage substation projects. We are seeking a Senior Engineer - Civil/Structural. The Senior Engineer will be responsible for providing all aspects of civil and st

Fisher Associates is actively seeking a Bridge Project Engineer with a Professional Engineer (PE) license to lead bridge design, structural analysis, inspection, and load rating of transportation infrastructure projects. This role is ideal for a Civil or Structural Engineer looking to make a meaning

Fisher Associates is seeking a Bridge Design Engineer (Civil/Structural) with 5-10 years of experience to join our growing Bridge and Transportation Engineering team. Support bridge design engineering, including load rating, structural analysis, and foundation design.

CDM Smith is seeking Engineers to support Federal Construction Projects with agencies such as USACE, AFCEC, and NAVFAC.This is a pipeline requisition for future projects.The Engineering Specialist applies broad professional knowledge of engineering principles to solve complex technical challenges an

Senior Technical Sourcer (Contract).Our robot, Digit, is the first to be sold into workplaces across the globe.Our team is differentiated by its expertise in imagining, engineering, and delivering robots with advanced mobility, dexterity, intelligence, and efficiency -- robots specifically designed

Bowman has an opportunity for an Acoustical Engineer to join our team remotely.At Bowman, we believe in creating opportunities for aspiring people to thrive and achieve ambitious goals.That's why a career at Bowman is more than a job.It is an opportunity to be part of a diverse and engaged community

At World Wide Technology, we work together to make a new world happen.Our important work benefits our clients and partners as much as it does our people and communities across the globe.WWT is dedicated to achieving its mission of creating a profitable growth company that is also a Great Place to Wo

Fisher Associates is seeking a Bridge Design Engineer (Civil/Structural) with 5–10 years of experience to join our growing Bridge and Transportation Engineering team. Support bridge design engineering, including load rating, structural analysis, and foundation design.

Varies, Clubhouse or Troy City School District School.Vacation time and sick leave, 401(k), health and dental insurance, life insurance, long-term disability, New York Paid Family Leave benefits, retirement benefits, employee assistance program (EAP), and eligibility for additional third-party disco

We are facing several engineering challenges in critical foundational data-plane services that powers the next gen OCI cloud.We need you to challenge existing engineering assumptions and boundaries, bring in your expertise in highly performant, reliable, available system engineering to take OCI data

Are you a civil or structural engineering graduate or early-career bridge engineer looking to gain hands-on experience in infrastructure design? Fisher Associates is seeking a Bridge Engineer I or II (Civil/Structural) with 0-5 years of experience to join our collaborative Bridge and Transportation

The OCI Compute Control Plane service is responsible for provisioning and managing all bare metal and virtual machine compute instances and provides the foundation upon which OCI's cloud is built.The service must guarantee high availability and there are ever-increasing demands on scale and throughp

NY Creates serves as a bridge for advanced electronics, leads projects that advance R&D in emerging technologies, and generates the jobs of tomorrow.NY CREATES also runs some of the most advanced facilities in the world, boasts more than 3,000 industry experts and faculty, and manages public and pr

Every day at Disney Cruise Line we take pride in bringing the magic of Disney to life.We find joy in creating cherished memories and form genuine connections with our guests.We hold each other to the highest degree and always act responsibly while ensuring the safety of fellow crew and guests.United

Trade Professionals for current & future projects in and around.Most positions are first shift with a pay scale of.Craftsmen who emphasize safety, productivity and superior workmanship, this is your chance to advance your career!.Tradesmen International not only offers consistent work, top pay, and

Meta is seeking talented engineers to join our teams in building cutting-edge products that connect billions of people around the world.As a member of our team, you will have the opportunity to work on complex technical problems, build new features, and improve existing products across various platf

Are you ready to embark on a journey that will revolutionize healthcare and improve patient outcomes on a global scale? The.Consulting Member of Technical Staff (CMTS).Healthcare Agents Engineering team.Consulting Member of Technical Staff - Agent Engineering (IC5).These agents are designed to autom