Structural jobs in Buffalo, New YorkCreate job alerts

📌Certified Welding Inspector (CWI) 📍Buffalo, NY 💰 Up to $90,000 + Benefits 🏗 Structural Steel 🚀 Why This Role Matters: Your expertise will safeguard the integrity of complex structural steel projects, ensuring every weld, joint, and fabrication meets the highest standards of safety, compliance, and craftsmanship. 🎯 Key Responsibilities: • Perform weld inspections to AWS, ASME, ISO, and client standards, • Conduct visual, dimensional, and non-destructive testing (VT, PT, MT, UT), • Interpret welding procedures, blueprints, and technical specifications, • Identify and resolve quality concerns with production and engineering teams, • Maintain accurate inspection records, logs, and reports, • Audit welding processes for compliance and best practices, • Support welders with training on quality requirements and standards ✅ Ideal Candidate Profile: • AWS Certified Welding Inspector (CWI) – required, • Experience in structural steel, shipbuilding, or heavy fabrication, • Strong knowledge of welding codes (AWS D1.1, ASME Section IX, etc.), • Proficiency in NDT methods (ASNT Level I/II preferred), • Skilled at interpreting weld symbols, drawings, and blueprints, • Detail-oriented with strong communication skills Submit resume to or apply online.

General Manager & Principal Engineer Reports to Executive Management Full-time Salaried Management Buffalo, NY Overview RCM Thermal Kinetics, a division of RCM Technologies, provides process development, engineering, and supply of technologies and equipment for distillation, evaporation, molecular sieve adsorption, scrubbers, and a wide range of separations technologies. Thermal Kinetics supports multiple industries including renewable energy and chemicals extending through detailed design through commissioning, and startup of process plants, delivering both modular shop-built and field-installed systems. RCM contracts with suppliers and outsources its equipment fabrications to capable shops in various geographies. RCM is seeking to hire an experienced General Manager and Principal Engineer to lead its team in Amherst, NY. RCM Technologies acquired the Thermal Kinetics Engineering company in 2018 to expand its process and industrial engineering capabilities, particularly through technology, patents, and intellectual property. This position requires managing the existing OEM-driven business and transforming a mostly chemical process focused group into a full-service engineering firm. Current core capabilities stem from a portfolio of patents commercialized in the fuel ethanol and renewable energy industries. Core capabilities encompass most of the common separations unit operations as listed previously plus work in crystallization and a few chemical reaction systems. Position Summary The General Manager is responsible for the overall strategic direction, operational management, and financial performance of Thermal Kinetics business unit. This includes overseeing project delivery, managing client relationships, driving business development, and supervising engineering staff. The manager ensures projects are completed on time, within budget, and to the highest quality standards while also fostering a culture of innovation, safety, and continuous improvement. Key Responsibilities Business Transformation & Growth • Develop and execute transformation strategy: Create and implement a comprehensive plan to transition the firm from a primary focus on process engineering to offering a full range of engineering services, including mechanical, electrical, instrumentation, civil/structural, and project management capabilities., • Identify and develop new service lines:, • Identify new service opportunities within existing core business and clients., • Promote engineering services for local and regional industrial and chemical sectors. Operational & Financial Leadership Team Leadership & People Development • Strategic hiring and upskilling: Identify staffing and skill gaps necessary for the transition and develop a strategy to address them. This will involve coordinating with other engineering offices and recruiting experienced engineers from various disciplines and creating professional development programs to cross-train existing staff and build the firm's new capabilities., • Create and implement change management: Communicate the strategic vision and manage the organizational changes required for the transformation. Build a culture that embraces new challenges and fosters collaboration across different engineering disciplines., • Manage operational change: Establish the new internal processes, workflows, and procedures required for a full-service firm, such as integrating multi-disciplinary teams on projects and managing a broader scope of services.Business Development & Client Relations, • Represent the firm's new capabilities: Act as the external face of RCM Thermal Kinetics. Represent its expanded capabilities to clients, industry groups, and at conferences to generate interest and new business., • Manage strategic partnerships: Identify and secure partnerships with other firms or contractors to augment capabilities during the transition phase, ensuring the firm can deliver on its new "full-service" promises., • Marketing and Sales: With sales staff direct identification of new market opportunities, grow the client base, and expand the firm's service offerings., • Trade Events and Outreach: With key engineering staff and sales team represent the firm in professional organizations, with clients, and at industry events to build and maintain positive relationships., • Strategic Planning: Develop and execute short-term and long-term strategic business plans to achieve company goals for growth, revenue, and profitability., • Budget and Financial Management: In coordination with the CFO and his team prepare and oversee departmental budgets, manage financial forecasting, and review profit and loss reports., • Project Contracting: Supervise and assist as needed Projects Managers and the Proposal Manager to manage contracts, prepare proposals and bids, and negotiate agreements with clients and partners., • Provide mentorship, coaching, and professional development opportunities to team members to foster growth and improve performance., • Conduct performance reviews, set clear goals, manage resource allocation to maximize team efficiency, and promote professional development and cross-training to build a versatile engineering team., • Recruit, mentor, and cultivate a positive and collaborative work environment that encourages teamwork, high morale, and technical excellence. Technical & Quality Oversight • Maintain a deep understanding of the firm's technical services and industry trends to guide strategic decisions and drive innovation., • Direct and review engineering designs and changes, ensuring technical accuracy and soundness of methods used by staff., • Oversee quality assurance and quality control (QA/QC) processes for all project deliverables, ensuring the team's work complies with all relevant industry standards, regulations, and safety codes. Required Qualifications • Bachelor's degree in an engineering discipline (e.g., Civil, Mechanical, Electrical, or related). Master’s degree in engineering management or an MBA is preferred., • Minimum 15+ years of progressive experience in an engineering field, including 5-7 years in managerial or leadership roles with P&L responsibility., • Professional Engineering (P.E.) license is required, in addition to proven experience in managing engineering operations, project delivery, and resource allocation., • Demonstrated success in business unit leadership, client development, and organizational transformation., • Expert-level technical knowledge relevant to the firm's specific engineering services., • Proficiency with industry-standard software, such as computer-aided design (CAD) programs, project management software (e.g., MS Project)., • Strong analytical skills for evaluating technical information and complex problems. Skills and Competencies • Leadership: Demonstrated ability to motivate, develop, and direct technical teams., • Communication: Excellent written and oral communication skills to convey complex information to a variety of technical and non-technical audiences., • Problem-Solving: Exceptional critical thinking and decision-making skills to address project-related issues., • Strategic Thinking: Strong ability to build effective relationships with clients, team members, and senior management., • Organizational: Proven ability to manage multiple projects, budgets, and schedules simultaneously., • Client Development: Track record of building and expanding client relationships in industrial and chemical markets. RCM Technologies, Inc. RCM Technologies, Inc. (RCMT) is a premier single-source provider of engineering, business and technology solutions. Since 1971, RCMT's core strengths and expertise are a result of decades of delivering operational and engineering excellence across multiple industries such as Healthcare, Aerospace & Defense, Energy, Process & Industrial, Life Sciences, Data and Solutions. RCM Engineering Services division is a comprehensive Engineering/Architectural design and construction management firm providing clients with total solutions for their project needs. RCM provides the highest quality services in all engineering disciplines to utility, commercial, and industrial customers. At RCM, we believe the key to success is working with our clients to define the correct technical staff and resources necessary to assure each project phase can be executed within the client's guidelines. This requires technical personnel with a depth of experience in all phases of project execution. • Over 510+ Engineers and Technical Designers on our staff ready to support our clients with their routine and complex engineering needs., • Experienced, multi-discipline project teams offer the full range of comprehensive services necessary to successfully execute all aspects of power delivery, generation, commercial and industrial projects., • Proven project management skills and tools are applied to all tasks to achieve budget and schedule commitments., • Highly responsive, flexible, and cost-effective total solutions consistently delivering results that exceed our customers' expectations. Competitive Salary offered, along with benefits such as 401k, Stock Purchase Plan, Health, Dental and more. Salary and Title are commensurate with experience. Equal Opportunity Statement RCM is an equal opportunity employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability, or status as a protected veteran. Disclaimer This job description is intended to describe the general nature and the level of the work being performed by the people assigned to this position. It is not intended to include every job duty and responsibility specific to the position. RCM reserves the right to amend and change responsibilities to meet business and organizational needs as necessary.

Construction Superintendent - Structural. Lead and manage a team of engineers, superintendents, and subcontractors working on the structural scope, ensuring clear communication, collaboration, and alignment of goals.

Tradesmen International is immediately hiring experienced Journeyman Iron Workers for projects located in and around Amherst, NY. This is a first shift opportunity with a pay range of up to $35/hour based on experience plus $125/Per Diem to Travelers 60+ miles from the job site. If you are an Iron Worker and want to work alongside other proven craftsmen who emphasize safety, productivity and superior craftsmanship, this is your chance to advance your career! Job Scope: • Steel beam erecting, • Connecting and bolting structural steel, • Metal deck spreading, • Work on two buildings Tradesmen International not only offers consistent work, top pay, and employment opportunities, we also provide a benefits package that is among the best in the industry. Our comprehensive benefits include: • Tradesmen+ Rewards Program – earn points for hours worked, • Vacation Pay, • Health insurance Tradesmen International is an EO employer - M/F/Veteran/Disability

Job Description The following responsibilities outline the Christa Construction experience and skill set requirements for an individual holding the position of project superintendent. Key Responsibilities • Jobsite Safety, • Schedule Management, • Daily Reporting, • Jobsite Communication and Coordination, • Entrepreneurial Spirit (Leading job with Authority), • Delivering the project High Level of Quality, • Thorough technical knowledge and understanding of all structural trades (Mandatory)., • Read and comprehend all Contract Documents (Mandatory), • Understands geotechnical, structural and materials testing requirements and procedures., • Thorough knowledge and understanding of crew size required for various levels of productivity in every critical path trade., • Knowledge of soil types and their properties along with the ability to read and comprehend a soils report., • Experience managing the installation of public utilities. Fully understands the timeframe for design, approval, and easement processes., • Knowledge of Sediment and Erosion Control. SWPPP, • Thorough technical knowledge and understanding of site development trades., • Thorough technical knowledge and understanding of all building envelope trades., • Thorough technical knowledge and understanding of all mechanical, electrical, plumbing and fire protection trades., • Thorough technical knowledge and understanding of all finish trade work., • Thorough understanding of plumbing, sprinkler, HVAC, and electrical, fair housing and ADA codes., • Experience managing, coordinating, and obtaining close-in inspections and certificate of occupancy., • Can perform a full submittal review, • Ability to prepare and maintain accurate and professional as-built drawings., • Manages the commissioning of the building. (If not officially commissioned then manage the MEP engineers’ inspections, punch lists, and mechanical startups and schedule and document all owner training.), • Ability to effectively manage and chair weekly subcontractor meetings and take notes to track and update accordingly., • Ability to work closely with the Project Manager to ensure project harmony., • Makes project status presentations at owner meetings., • Completes and maintains accurate and thorough daily reports., • Completes and maintains weekly and incident safety reports., • Manages and maintains an up-to-date, posted, and accurate set of contract documents., • Maintains accurate submittal files on the project., • Performs accurate takeoffs (lumber, trim, doors, etc.), • Is proficient and experienced with FTP sites, F-drive server access, use, and similar computer abilities., • Responsible for coordinating and documenting all required project inspections with the Town, Utilities, Third Party Agencies, insurance representatives, etc., • Thorough understanding of the critical path on a project, sequence of construction, project phasing and various trade durations., • Schedules and manages the project mock-up., • Ability to create and maintain an accurate “three-week look ahead schedule"., • General knowledge of the duration and crew size required to complete various tasks., • Thorough understanding of lead time requirements for materials, selections, and work to be performed by others., • Ability to assist the Project Manager in creating an accurate buyout schedule, and the ability to provide accurate dates for the submittal log to avoid late contract awards or material submittals, • Holds Preconstruction meetings, • Soils handling, placement, and testing, • Civil utilities (storm, sanitary, water) and public utility (Gas, electric, Phone, Cat) installations., • Concrete and Masonry preparation, placement, and testing., • Structural - steel / decking / joists and LG framing installation, details, layout, and structural review, • Wood framing practices, inspections, and structural and dimensional review, • MEP rough in practices, coordination, details, and inspection., • Life safety — Fire walls / Smoke walls / Fire caulking / UL assembly, • Insulation (Thermal and Sound) and Vapor barrier, • All Interior finishes (Drywall — carpet), • Exterior -Waterproofing / weather barrier / moisture barrier / air barrier, • Roofing installation, details, and inspections, • Siding and flashing, installation, details, and inspections., • Holds an OSHA 30 Hour certificate, • Obtains and maintains a first aid/CPR certification, • Consistently sets a good example for others (wears hardhat, boots, safety glasses, etc.), • Demonstrates the ability and willingness to maintain a safe jobsite including disciplining subcontractors as necessary, • Maintains easily accessible, up to date site specific Christa Construction safety manual., • Collects site specific subcontractor safety manuals from all subcontractors prior to them starting work on site., • Equipment, • Oracle Primavera Cloud - Intermediate, • Microsoft Excel - Intermediate, • Procore - Intermediate, • Note Vault - Intermediate Whether you see our Christa sign in front of a housing complex, on a college or hospital campus, or in front of a major athletic stadium, our goal is always the same—to build value for our clients, the facility’s end users and the communities these buildings will serve. That’s been the way since 1982.Christa has completed over $7.0 billion worth of construction throughout New York State. We have experience in the construction of multi-family, senior and student housing, commercial offices, municipality work, medical facilities, warehouses, hotels and restaurants.\r\n\r\nWhether you see our Christa sign in front of a housing complex, on a college or hospital campus, or in front of a major athletic stadium, our goal is always the same—to build value for our clients, the facility’s end users and the communities these buildings will serve. That’s been the way since 1982.

Job DescriptionDescription: Precast Senior Designer- Civil/Structural Precast Senior Designer – Lead Concrete Design & Mentor Future Engineering Leaders Are you passionate about precision structural engineering and modern precise infrastructure design? Fisher Associates is seeking a Precast Senior Designer to spearhead the development of efficient, sustainable, and code-compliant precast and prestressed concrete solutions. You will provide technical direction, support and guide multidisciplinary design teams, and uphold the highest standards of performance, constructability, and quality. Your expertise will drive transportation and structural infrastructure projects that enhance and strengthen communities. Apply today to elevate your career in precast concrete design leadership and help shape the future of infrastructure engineering. About Fisher Associates: Fisher Associates is a multidisciplinary design services firm headquartered in Rochester, NY, with eight locations nationwide. The firm provides civil/site engineering, transportation engineering, electrical engineering, landscape architecture, architecture, planning, environmental, surveying, GIS, construction inspection, precast engineering and construction engineering services to public and private sector clients across numerous markets. Why You’ll Love Working at Fisher • You are empowered to achieve exceptional results through collaboration and ownership., • Your voice matters in our inclusive and transparent culture, where accessible leadership genuinely welcomes ideas and feedback., • Your growth is our priority. We offer clear career paths, tuition assistance, and ongoing learning opportunities to support your development., • You thrive in a culture that celebrates fun and fosters a relaxed, easy-going atmosphere, so you can bring the best of yourself to work every day., • Your journey is shaped by a culture of mentorship, where experienced colleagues guide your growth and you, in turn, inspire others., • Lead and execute precast engineering and design tasks efficiently., • Collaborate with project teams to deliver structurally sound, cost-effective, and visually appealing precast concrete designs., • Perform and review structural analysis and calculations to ensure safety under various loads and conditions., • Select materials and components for precast concrete production that meet strength, durability, and sustainability standards., • Create accurate drawings, plans, and specifications for precast projects aligned with industry design standards., • Support cost estimation for materials, • Support Project Managers and Designers throughout the project lifecycle., • Maintain up-to-date knowledge of codes, technologies, and advancements in the precast-prestressed field., • Promote, utilize and support QA/QC processes to guarantee quality deliverables. Your Impact Matters, Your Career Thrives. Work on engaging precast engineering projects and experience first-hand the positive changes you create in your own community. Engage in diverse and challenging project opportunities that will help you grow and advance your career. We offer competitive salaries and benefits, including: • Medical, Dental & Vision Insurance, • 401(k) Plan, • Company-paid Life and Disability Insurance, • Hybrid Work Schedule, • Generous PTO and Paid Holidays, • Strong Work-life Balance, • Shareholders Program, • Professional Development Opportunities and Reimbursement, • Supplemental Benefits Designed for Total Well-being and Financial Security. Actual compensation may vary based on relevant experience, qualifications/education, and other factors. The salary range is not necessarily reflective of the actual total compensation that may be earned nor promise any specific pay for any specific employee. Salary range excludes monetary value of benefits. #LI-HYBRID Requirements: What You Bring, Your Expertise as a Precast Senior Designer • 10 plus years of precast design experience in precast concrete design engineering for transportation infrastructure and underground structures (utility vaults, manholes, drainage structures and pump stations)., • B.S. degree in Civil Engineering preferred; equivalent relevant experience will be considered, • Familiarity with ACI 318, ACI 350, ASCE-7, AASHTO, • Familiarity with IBC codes a plus, • Professional Engineering License (PE) a plus but not required, • Proficiency in AutoCAD & RISA 3D, • Professional performance standards aligned with Fisher’s Mission, Vision, and Core Values., • Proven ability to deliver quality work through critical thinking, problem-solving, and sound judgment, • Driven to own projects, prioritize effectively, and thrive in a fast-paced, growth-focused environment, • Highly adaptable and proactive in meeting deliverables and deadlines., • Dedicated to fostering trusting relationships through collaboration integrity, respect, and active listening, • Curious, improvement-minded, and always seeking better solutions

Job Description Pay: $22.00 - $32.00 per hour Job description: Welder / Fabricator – 2nd Shift (3:30 PM–Midnight) Location: Buffalo, NY Schedule: 2nd Shift | 3:30 PM – 12:00 AM | Monday–Friday Employment Type: Full-Time | Overtime Available Industry: Industrial Manufacturing • Structural Steel • Modular Fabrication Job Overview We are seeking an experienced Mechanical Welder / Fabricator for our 2nd Shift (3:30 PM–Midnight) industrial manufacturing operations. The Mechanical Welder / Fabricator will fit, tack, weld, assemble, and repair steel components, structural assemblies, and production parts using MIG/GMAW, TIG/GTAW, and other welding processes in a fast-paced fabrication environment. This role is ideal for candidates with experience in manufacturing welding, structural steel welding, blueprint reading, mechanical assembly, production welding, and industrial metal fabrication. Daily Responsibilities As a 2nd Shift Mechanical Welder / Fabricator, you will: Welding & Fabrication • Fit, tack, and weld carbon steel, stainless steel, and low-alloy steel using MIG/GMAW, TIG/GTAW, and manual welding techniques., • Weld assemblies, sub-assemblies, brackets, channels, angles, and modular components per engineering drawings., • Read and interpret blueprints, weld symbols, detail drawings, and fabrication schematics., • Measure, cut, and layout materials using calipers, squares, tape measures, and fabrication tools., • Fabricate fixtures and support tools based on engineering sketches., • Assemble welded components into larger structures, platforms, frames, or modular units., • Inspect welds for accuracy, penetration, and quality., • Repair, rework, or correct fabrication issues and dimensional deviations., • Meet production targets, quality standards, and labor-hour requirements during 2nd shift operations., • Maintain welding machinery, tools, and PPE in safe working condition., • Follow OSHA rules, AWS standards, and internal safety guidelines., • Proven experience as a Welder, Fabricator, MIG Welder, TIG Welder, or Industrial Welder., • Skilled in MIG, TIG, Stick, GMAW, GTAW, and related welding processes., • Experience using electrical and manual tools (angle grinders, saws, calipers, clamps, squares, measuring tools)., • Ability to read and interpret technical drawings, diagrams, and welding blueprints., • Knowledge of welding safety standards, weld quality requirements, and inspection practices., • Ability to lift 50 lbs and perform physical tasks including bending, kneeling, overhead work, and climbing., • Strong attention to detail and quality craftsmanship., • Welders should have AWS Certification (GMAW, 3G Vertical Up, 4F Overhead)., • Mechanical assembly experience in manufacturing or fabrication environments., • Experience welding carbon steel, stainless steel, and alloy steels., • Knowledge of torch cutting, plasma cutting, and GTAW/TIG welding., • Understanding of manufacturing tolerances and measurement verification., • Competitive pay with 2nd-shift differential, • Overtime opportunities, • Growing industrial and modular fabrication environment, • Work on complex and custom steel structures We are an equal opportunity employer committed to a safe, inclusive, and diverse workplace. Job Type: Full-time Benefits: • 401(k), • Dental insurance, • Flexible spending account, • Health insurance, • Health savings account, • Life insurance, • Paid time off, • Professional development assistance, • Vision insurance Work Location: In person Company DescriptionGTI specializes in the design, engineering, fabrication, and deployment of custom modular structures, shipping container-based structures, and ballistic metal fabrication. We serve multiple industries, including DOD contractors, military, disaster relief, and commercial markets. Our containerized and modular solutions are all built in-house at our factory in Buffalo, NY. Manufacturing capabilities range from military training, live fire enclosures, bathroom/shower units, expeditionary camps, medical facilities, water treatment, electrical/energy storage enclosures, and much more.GTI specializes in the design, engineering, fabrication, and deployment of custom modular structures, shipping container-based structures, and ballistic metal fabrication. We serve multiple industries, including DOD contractors, military, disaster relief, and commercial markets. Our containerized and modular solutions are all built in-house at our factory in Buffalo, NY. Manufacturing capabilities range from military training, live fire enclosures, bathroom/shower units, expeditionary camps, medical facilities, water treatment, electrical/energy storage enclosures, and much more.

Job Description Drainage & Foundation Repair company.. Looking for professionals to install drain tile systems ,sump pumps, wall crack repair, concrete and more! Must have valid license. Company DescriptionInstall drainage systems in basements and yards, sump pumps, foundation repair / structural repair , masonry / concrete finishingInstall drainage systems in basements and yards, sump pumps, foundation repair / structural repair , masonry / concrete finishing

Job DescriptionDescription: Precast Engineer - Civil/Structural Join Our Team as a Precast Engineer – Shape the Future of Concrete Design & Innovation! Fisher Associates is hiring a full-time Precast Engineer to design and engineer high-quality precast concrete components for a variety of civil and structural engineering projects. You’ll ensure every element meets structural codes, safety standards, and project specs—delivering safe, reliable, and cost-effective solutions. Collaborate with a skilled, supportive team and grow your engineering career in a flexible, impact-driven environment. Apply now and engineer the future with us! About Fisher Associates: Fisher Associates is a multidisciplinary design services firm headquartered in Rochester, NY, with eight locations nationwide. The firm provides civil/site engineering, transportation engineering, electrical engineering, landscape architecture, architecture, planning, environmental, surveying, GIS, construction inspection, precast engineering and construction engineering services to public and private sector clients across numerous markets. Why You’ll Love Working at Fisher • You are empowered to achieve exceptional results through collaboration and ownership., • Your voice matters in our inclusive and transparent culture, where accessible leadership genuinely welcomes ideas and feedback., • Your growth is our priority. We offer clear career paths, tuition assistance, and ongoing learning opportunities to support your development., • You thrive in a culture that celebrates fun and fosters a relaxed, easy-going atmosphere, so you can bring the best of yourself to work every day., • Your journey is shaped by a culture of mentorship, where experienced colleagues guide your growth and you, in turn, inspire others., • Execute precast engineering and design tasks efficiently., • Collaborate with project teams to deliver structurally sound, cost-effective, and visually appealing precast concrete designs., • Perform structural analysis and calculations to ensure safety under various loads and conditions., • Select materials and components for precast concrete production that meet strength, durability, and sustainability standards., • Create accurate drawings, plans, and specifications for precast projects aligned with industry design standards., • Support cost estimation for materials., • Support Project Managers and Designers throughout the project lifecycle., • Promote, utilize and support QA/QC processes to guarantee quality deliverables. What We Offer Your Impact Matters, Your Career Thrives. Work on engaging precast engineering projects and experience first-hand the positive changes you create in your own community. Engage in diverse and challenging project opportunities that will help you grow and advance your career. We offer competitive salaries and benefits, including: • Medical, Dental & Vision Insurance, • 401(k) Plan, • Company-paid Life and Disability Insurance, • Hybrid Work Schedule, • Generous PTO and Paid Holidays, • Strong Work-life Balance, • Shareholders Program, • Professional Development Opportunities and Reimbursement, • Supplemental Benefits Designed for Total Well-being and Financial Security. Actual compensation may vary based on relevant experience, qualifications/education, and other factors. The salary range is not necessarily reflective of the actual total compensation that may be earned nor promise any specific pay for any specific employee. Salary range excludes monetary value of benefits. #LI-Hybrid Requirements: What You Bring, Your Expertise as a Precast Engineer • B.S. degree in Civil Engineering or a related field, Master’s preferred, • 0 - 5 years minimum of transportation/structural experience preferred, • Concrete design engineering course or design experience preferred, • EIT or ability to obtain it, • Proficiency in AutoCAD & RISA 3D, • Professional performance standards aligned with Fisher’s Mission, Vision, and Core Values, • Proven ability to deliver high quality work and solve problems with critical thinking and sound judgment., • Driven to take ownership of your projects, prioritize your tasks effectively, and thrive in a dynamic, fast-paced environment that fosters personal and professional growth, • Highly adaptable and proactive in meeting deliverables and deadlines, • Dedicated to fostering trust and collaboration through integrity, respect, and active listening in client and team relationships, • Have a sense of curiosity, always looking for a better way, and a continuous improvement mindset

Job DescriptionDescription: Lead Innovative Bridge Design and Engineering Projects with Fisher Associates Fisher Associates is actively seeking a Bridge Project Engineer with a Professional Engineer (PE) license to lead bridge design, structural analysis, inspection, and load rating of transportation infrastructure projects. This role is ideal for a Civil or Structural Engineer looking to make a meaningful impact on public infrastructure with a firm known for its technical excellence and innovative approach. As a key member of our civil/structural engineering team, you’ll collaborate on multidisciplinary projects, applying your bridge engineering expertise in a supportive, growth-oriented environment. If you're a licensed PE with hands-on experience in bridge design, transportation structures, and a passion for building safe, sustainable infrastructure — we want to hear from you. About Fisher Associates: Fisher Associates is a multidisciplinary design services firm headquartered in Rochester, NY, with eight locations nationwide. The firm provides civil/site engineering, transportation engineering, electrical engineering, landscape architecture, architecture, planning, environmental, surveying, GIS, construction inspection, precast engineering and construction engineering services to public and private sector clients across numerous markets. Why You’ll Love Working at Fisher • You are empowered to achieve exceptional results through collaboration and ownership., • Your voice matters in our inclusive and transparent culture, where accessible leadership genuinely welcomes ideas and feedback., • Your growth is our priority. We offer clear career paths, tuition assistance, and ongoing learning opportunities to support your development., • You thrive in a culture that celebrates fun and fosters a relaxed, easy-going atmosphere, so you can bring the best of yourself to work every day., • Your journey is shaped by a culture of mentorship, where experienced colleagues guide your growth and you, in turn, inspire others., • Lead bridge design, including load rating, structural analysis, and foundation design., • Develop design plans, specifications, and cost estimates for bridge and transportation structures., • Maintain accurate records of project details, including design documents, progress reports, and budget information., • Participate in project planning meetings, coordinating tasks to meet scope, schedule, and budget requirements., • Support project managers with schedules, documentation, and presentations as needed., • Ensure compliance with safety codes, design standards, and regulatory requirements., • Conduct field inspections and prepare detailed bridge and culvert inspection reports., • Provide technical support during construction: respond to RFIs, conduct site visits, and ensure design integrity., • Collaborate with internal teams, subconsultants, regulatory agencies, and clients to ensure seamless project delivery. Your Impact Matters, Your Career Thrives. Work on engaging bridge engineering design projects and experience first-hand the positive changes you create in your own community. Engage in diverse and challenging project opportunities that will help you grow and advance your career. We offer competitive salaries and benefits, including: • Health insurance-Medical, Dental & Vision, • 401(k) plan, • Company-paid life and disability insurance, • Hybrid work schedule, • Generous PTO, • Strong work-life balance, • Shareholders program, • A comprehensive range of benefit options to support your well-being, financial security, and peace of mind. Actual compensation may vary based on relevant experience, qualifications/education, and other factors. The salary range is not necessarily reflective of the actual total compensation that may be earned nor promises any specific pay for any specific employee. Salary range excludes monetary value of benefits. #LI-Hybrid Requirements: What You Bring, Your Expertise • B.S. degree in Civil Engineering or a related field, with a Master’s preferred., • Over 10 years of transportation experience, structures/bridge design experience preferred, • Professional Engineering License (PE) or ability to obtain it., • Experience with MicroStation, STAAD, Bridge Design Software programs preferred., • Professional performance standards aligned with Fisher’s Mission, Vision, and Core Values., • Demonstrated high-quality work and ability to problem solve applying critical thinking, and sound judgment to challenges., • Driven to take ownership of your projects, prioritize your tasks effectively, and thrive in a dynamic, fast-paced environment that fosters personal and professional growth., • Highly adaptable and proactive in meeting deliverables and deadlines, • Dedicated to fostering trust and collaboration through integrity, respect, and active listening in client and team relationships., • Have a sense of curiosity, always looking for a better way, and a continuous improvement mindset.

Job DescriptionDescription: A Bridge Engineer– Civil/Structural Full-Time | Hybrid Buffalo, NY Launch Your Career & Structural Engineering | Design the Bridges of Tomorrow Are you a civil or structural engineering graduate or early-career bridge engineer looking to gain hands-on experience in infrastructure design? Fisher Associates is seeking a Bridge Engineer I or II (Civil/Structural) with 0–5 years of experience to join our collaborative Bridge and Transportation team. In this hybrid role you’ll work on impactful bridge design and transportation infrastructure projects that improve safety and mobility in the communities we serve. This is an exciting opportunity to launch your engineering career with mentorship, professional development, and a clear path to PE licensure. About Fisher Associates: Fisher Associates is a multidisciplinary design services firm headquartered in Rochester, NY, with eight locations nationwide. The firm provides civil/site engineering, transportation engineering, electrical engineering, landscape architecture, architecture, planning, environmental, surveying, GIS, construction inspection, precast engineering and construction engineering services to public and private sector clients across numerous markets. Why You’ll Love Working at Fisher • You are empowered to achieve exceptional results through collaboration and ownership., • Your voice matters in our inclusive and transparent culture, where accessible leadership genuinely welcomes ideas and feedback., • Your growth is our priority. We offer clear career paths, tuition assistance, and ongoing learning opportunities to support your development., • You thrive in a culture that celebrates fun and fosters a relaxed, easy-going atmosphere, so you can bring the best of yourself to work every day., • Your journey is shaped by a culture of mentorship, where experienced colleagues guide your growth and you, in turn, inspire others., • Support bridge design engineering, including load rating, structural analysis, and foundation design., • Develop design plans, construction documents, specifications, and cost estimates for bridge and transportation structures., • Maintain detailed records of bridge design documents, reports, and budgets., • Support project managers with schedules, documentation, and presentations., • Ensure designs adhere to state and local standards, regulations and safety codes., • Promote, utilize and support QA/QC processes to guarantee quality deliverables., • Assist with field inspections and prepare detailed bridge inspection reports and analyze foundation design., • Provide technical support during construction, respond to RFIs and attend site visits. Your Impact Matters, Your Career Thrives. Work on engaging bridge design engineering projects and experience first-hand the positive changes you create in your own community. Engage in diverse and challenging project opportunities that will help you grow and advance your career. We offer competitive salaries and benefits, including: • Medical, Dental & Vision Insurance, • 401(k) Plan, • Company-paid Life and Disability Insurance, • Hybrid Work Schedule, • Generous PTO and Paid Holidays, • Strong Work-life Balance, • Shareholders Program, • Professional Development Opportunities and Reimbursement, • Supplemental Benefits Designed for Total Well-being and Financial Security Actual compensation may vary based on relevant experience, qualifications/education, and other factors. The salary range is not necessarily reflective of the actual total compensation that may be earned nor promises any specific pay for any specific employee. Salary range excludes monetary value of benefits. #LI-Hybrid Requirements: What You Bring, Your Expertise as a Bridge Engineer • B.S. degree in Civil Engineering or a related field, Master’s preferred, • 0-5 years of transportation experience, structures/bridge design engineering experience preferred, • EIT preferred or ability to obtain it, • Proficiency in MicroStation, STAAD and Bridge Design Software, • Familiarity with state DOT design standards (NYSDOT or PennDOT) preferred, • Professional performance standards aligned with Fisher’s Mission, Vision, and Core Values, • Proven ability to deliver quality work through critical thinking, problem-solving, and sound judgment, • Driven to take ownership of projects, prioritize effectively, and thrive in a dynamic, fast-paced environment., • Highly adaptable and proactive in meeting deliverables and deadlines, • Dedicated to fostering trusting relationships through collaboration integrity, respect, and active listening., • Have a sense of curiosity, always looking for a better way, and a continuous improvement mindset

Job DescriptionSalary: $80,000-$95,000 Position Summary: In support of the Companys primary and single most important objective which is TO GET AND KEEP PROFITABLE CUSTOMERS, this individual is responsible for developing detailed mechanical and structural designs on a project-to-project basis. Successes of the position are measured via the following key indicators: • Working safely and meeting all environmental standards of the customer, OSHA, and the employer, • Designing systems and equipment that meet project specifications, satisfy applicable regulatory requirements, remain within budgetary constraints, minimize field installation time, and avoid the need for rework, • Timely and accurate completion of drawings and other related paperwork Position Responsibilities: • Develop detailed mechanical and structural designs on a project-by-project basis, including the execution of all design activities, • Create process plant and structural steel skid-mounted unit assembly drawings and plant general arrangement drawings using Autodesk Inventor, in collaboration with a multidisciplinary project team, • Perform structural analysis and part modeling in Autodesk Inventor, maintaining the part library, • Develop part specifications and assembly bills of materials, • Support purchasing and manufacturing teams with activities related to assembly construction, • Develop detailed assembly field installation instructions, • Coordinate activities with the shop to ensure accurate implementation of designs, • Conduct shop inspections and document results, • Demonstrate multi-tasking skills to manage concurrent design and development efforts, • Communicate effectively with colleagues and supervisors to clarify instructions and coordinate work, • Perform other job-related tasks as requested and follow any additional instructions as needed Core Competencies (Mandatory): • Ability to create detailed drawings of assemblies for customer approval and shop construction, • Proficiency in reading and interpreting P&IDs, • Expertise in modeling process piping and structural steel assemblies using Autodesk, • Ability to implement customer piping and other specifications during the design process, • Strong knowledge of process equipment such as pressure vessels, pumps, pipes, valves, fittings, and structural steel shapes Skills and Qualifications: • Bachelors degree in Mechanical Engineering Technology or related field, • Mechanical Engineering BS degree preferred, • Skilled in AutoCAD, Autodesk Inventor, PID, and 3D modeling, • Excellent computer skills, with a strong proficiency in Autodesk Inventor, including Frame Generator and Tube & Pipe modules, • Excellent verbal and written communication skills Working Conditions: • Standard office environment, • Field construction environment, • Manufacturing/factory environment Physical Requirements: • Standard physical requirements for a typical office environment, • Field/in-plant physical activities (e.g., climbing, lifting, standing, and walking continually), • Hearing and visual acuity necessary to be aware of and manage safety hazards and environmental issues in the manufacturing and field settings

Job Description Position Summary: GTI Fabrication is seeking a highly experienced and technically proficient Senior Manufacturing Engineer to lead the design, control, and continuous improvement of manufacturing processes in a modular fabrication environment. This individual contributor role focuses on developing scalable, efficient production methods for custom enclosures, containerized systems, and structural steel weldments. The ideal candidate will have deep experience in SolidWorks, AutoCAD, Lean Manufacturing, and quality systems such as ISO9001. The Senior Manufacturing Engineer will work cross-functionally with Engineering, Operations, Quality, and Supply Chain to ensure manufacturability, cost-effectiveness, and regulatory compliance across the product lifecycle. Key Responsibilities: • Design, implement, and optimize manufacturing processes for modular fabricated systems, containerized enclosures, and steel structures., • Develop formal manufacturing documentation including process flow diagrams, work instructions, BOMs, routings, CNC programming, and assembly/inspection plans., • Use CAD tools (SolidWorks and AutoCAD) to design fixtures, tooling, and work-holding solutions to support scalable production., • Translate engineering design requirements into robust and efficient production processes., • Lead new product introduction (NPI) efforts from prototype through full-rate production., • Apply Lean Manufacturing principles to reduce waste, improve flow, and optimize floor layouts., • Integrate automated and digital manufacturing technologies where applicable., • Collaborate with cross-functional teams to evaluate manufacturability and ensure alignment between engineering intent and production capability., • Utilize ERP systems (NetSuite preferred) to manage process documentation and support real-time operations visibility., • Maintain compliance with ISO 9001 standards; support internal and external audits., • Drive root cause analysis and corrective action using tools like FMEA, SPC, and 8D., • Bachelor’s degree in Mechanical Engineering, Manufacturing Engineering, or related field., • 8–15 years of experience in manufacturing engineering, preferably in modular fabrication, defense, energy, or industrial equipment sectors., • Proficiency in SolidWorks and AutoCAD for 3D modeling, 2D drafting, and tolerance analysis., • Strong working knowledge of Lean Manufacturing, Six Sigma, or similar methodologies., • Experience with ERP/MRP systems (NetSuite a plus)., • Demonstrated success in process development, design for manufacturability, and production scaling., • Hands-on experience with containerization, modular product platforms, and structural weldments., • Knowledge of ISO9001 quality systems and compliance standards., • Exceptional analytical, problem-solving, and project management skills., • Experience in containerized HVAC, power distribution, or control system enclosures., • Familiarity with CNC machining, sheet metal fabrication, and industrial coatings., • Certification in Lean Six Sigma, PMP, or related process improvement disciplines., • This is a full-time onsite position based in Buffalo, NY., • Work takes place in both office and fabrication floor environments., • May require occasional travel to customer sites or GTI facilities., • Must be able to occasionally lift up to 25 lbs and walk fabrication areas. GTI Fabrication is an equal opportunity employer committed to building a diverse and inclusive workplace.

Job Description We are looking for: • Flux-cored welders with experience in custom/structural steel fabrication, • 2nd shift: Mon-Thurs, 2pm to 12:30am; extra $1.50/hour for 2nd shift., • Candidates should have experience on weld fillets ranging from 1" to 2"; must be able to perform multi-pass welds, as well as gauging and grinding., • Will accept entry-level welders for 2nd shift (pay range for entry level is $20-$25) Job Description: • Setting up 600 amp wire feed welders, • Experience in the use 100 ton cranes, • Use of cutting and heating torches, • Grinding, • Drilling, • Taping, • Sawing, • Use of an iron worker, • Overhead crane use, • Materials handling, • Ability to work from scaffolding, • Hourly wage is dependent on experience and capabilities; please include your wage expectations with your resume; extra $1.50/hour for 2nd shift *Only those with experience need apply *Great benefits: Medical with low HRA deductible., dental and vision 90% employer paid; short and long-term disability ins. 100% employer paid; life insurance policy of $50k

Job DescriptionDescription: Advance Your Career | Shape the Infrastructure of Tomorrow Fisher Associates is seeking a Bridge Design Engineer (Civil/Structural) with 5–10 years of experience to join our growing Bridge and Transportation Engineering team. Whether you're already licensed or on the path to PE certification, you'll gain mentorship and work on meaningful bridge and transportation infrastructure projects that enhance safety, sustainability, and connectivity in the communities we serve. About Fisher Associates: Fisher Associates is a multidisciplinary design services firm headquartered in Rochester, NY, with eight locations nationwide. The firm provides civil/site engineering, transportation engineering, electrical engineering, landscape architecture, architecture, planning, environmental, surveying, GIS, construction inspection, precast engineering and construction engineering services to public and private sector clients across numerous markets. Why You’ll Love Working at Fisher • You are empowered to achieve exceptional results through collaboration and ownership., • Your voice matters in our inclusive and transparent culture, where accessible leadership genuinely welcomes ideas and feedback., • Your growth is our priority. We offer clear career paths, tuition assistance, and ongoing learning opportunities to support your development., • You thrive in a culture that celebrates fun and fosters a relaxed, easy-going atmosphere, so you can bring the best of yourself to work every day., • Your journey is shaped by a culture of mentorship, where experienced colleagues guide your growth and you, in turn, inspire others., • Support bridge design engineering, including load rating, structural analysis, and foundation design., • Develop design plans, construction documents, specifications, and cost estimates for bridge and transportation structures., • Maintain detailed records of bridge design documents, reports, and budgets., • Support project managers with schedules, documentation, and presentations., • Ensure designs adhere to state and local standards, regulations and safety codes., • Promote, utilize and support QA/QC processes to guarantee quality deliverables., • Conduct field inspections and prepare detailed bridge inspection reports and analyze foundation design., • Provide technical support during construction, respond to RFIs and attend site visits. Your Impact Matters, Your Career Thrives. Work on engaging bridge design engineering projects and experience first-hand the positive changes you create in your own community. Engage in diverse and challenging project opportunities that will help you grow and advance your career. We offer competitive salaries and benefits, including: • Medical, Dental & Vision Insurance, • 401(k) Plan, • Company-paid Life and Disability Insurance, • Hybrid Work Schedule, • Generous PTO and Paid Holidays, • Strong Work-life Balance, • Shareholders Program, • Professional Development Opportunities and Reimbursement, • Supplemental Benefits Designed for Total Well-being and Financial Security Actual compensation may vary based on relevant experience, qualifications/education, and other factors. The salary range is not necessarily reflective of the actual total compensation that may be earned nor promises any specific pay for any specific employee. Salary range excludes monetary value of benefits. #LI-Hybrid Requirements: What You Bring, Your Expertise as a Bridge Design Engineer • B.S. degree in Civil Engineering or a related field, Master’s preferred, • 5-10 years of transportation experience, structures/bridge design engineering experience preferred, • Professional Engineering License (PE) preferred or ability to obtain it, • Proficiency in MicroStation, STAAD and Bridge Design Software, • Familiarity with state DOT design standards (NYSDOT or PennDOT preferred), • Professional performance standards aligned with Fisher’s Mission, Vision, and Core Values, • Demonstrated high-quality work and ability to problem solve applying critical thinking, and sound judgment to challenges, • Driven to take ownership of projects, prioritize tasks effectively, and thrive in a dynamic, fast-paced environment that fosters personal and professional growth, • Highly adaptable and proactive in meeting deliverables and deadlines, • Dedicated to fostering trust and collaboration through integrity, respect, and active listening in client and team relationships, • Have a sense of curiosity, always looking for a better way, and a continuous improvement mindset

Job DescriptionDescription: Highway Design Engineer – Civil/Structural | Shape the Future of Transportation Ready to build the highways of tomorrow? Are you a skilled Highway Design Engineer with a passion for designing safe, efficient, and innovative transportation systems? Join our dynamic team of civil and structural engineering professionals where your expertise in roadway design, highway infrastructure, and transportation engineering will directly impact the communities we serve. In this role, you’ll play a key part in designing highways, roadways, intersections, and other critical transportation infrastructure projects. You’ll collaborate with multidisciplinary teams to solve complex engineering challenges and ensure all designs meet industry standards, environmental requirements, and safety regulations. About Fisher Associates: Fisher Associates is a multidisciplinary design services firm headquartered in Rochester, NY, with eight locations nationwide. The firm provides civil/site engineering, transportation engineering, electrical engineering, landscape architecture, architecture, planning, environmental, surveying, GIS, construction inspection, precast engineering and construction engineering services to public and private sector clients across numerous markets. Why You’ll Love Working at Fisher • You are empowered to achieve exceptional results through collaboration and ownership., • Your voice matters in our inclusive and transparent culture, where accessible leadership genuinely welcomes ideas and feedback., • Your growth is our priority. We offer clear career paths, tuition assistance, and ongoing learning opportunities to support your development., • You thrive in a culture that celebrates fun and fosters a relaxed, easy-going atmosphere, so you can bring the best of yourself to work every day., • Your journey is shaped by a culture of mentorship, where experienced colleagues guide your growth and you, in turn, inspire others., • Demonstrated ability to efficiently manage highway design projects, including drainage, alignments, and related tasks., • Prepare and maintain comprehensive design plans, detailed specifications, technical reports, and accurate cost estimates., • Ensure designs adhere to state and local standards, regulations and safety codes., • Promote, utilize and support QA/QC processes to guarantee quality deliverables., • Collaborate with internal teams, clients, subconsultants and agencies to ensure seamless project delivery., • Proactively support project managers with schedules, documentation, and presentations. Your Impact Matters, Your Career Thrives. Work on engaging Highway Design Engineering projects and experience first-hand the positive changes you create in your own community. Engage in diverse and challenging project opportunities that will help you grow and advance your career. We offer competitive salaries and benefits, including: • Medical, Dental & Vision Insurance, • 401(k) Plan, • Company-paid Life and Disability Insurance, • Hybrid Work Schedule, • Generous PTO and Paid Holidays, • Strong Work-life Balance, • Shareholders Program, • Professional Development Opportunities and Reimbursement, • Supplemental Benefits Designed for Total Well-being and Financial Security Actual compensation may vary based on relevant experience, qualifications/education, and other factors. The salary range is not necessarily reflective of the actual total compensation that may be earned nor promises any specific pay for any specific employee. Salary range excludes monetary value of benefits. #LI-Hybrid Requirements: What You Bring, Your Expertise as a Highway Design Engineer • B.S. degree in Civil Engineering or a related field, Master’s preferred, • 5-10 years of transportation experience Highway Design Engineering experience preferred, • EIT required, • Professional Engineering License (PE) preferred or ability to obtain it, • Proficiency in MicroStation, STAAD, OpenRoads, and Bridge Design Software preferred., • Familiarity with state DOT design standards (NYSDOT or PennDOT preferred), • Professional performance standards aligned with Fisher’s Mission, Vision, and Core Values., • Proven ability to deliver quality work through critical thinking, problem-solving, and sound judgment, • Driven to own projects, prioritize effectively, and thrive in a fast-paced, growth-focused environment, • Highly adaptable and proactive in meeting deliverables and deadlines., • Dedicated to fostering trusting relationships through collaboration integrity, respect, and active listening, • Curious, improvement-minded, and always seeking better solutions

Job DescriptionDescription: Precast Design Engineer - Civil/Structural Join Our Team as a Precast Design Engineer – Innovate and Lead in Concrete Design Are you ready to take your engineering career to new heights? Fisher Associates is seeking a skilled Precast Design Engineer to join our dynamic team, where your expertise in designing precast concrete components will make an impact on diverse civil and structural projects. Join Fisher Associates and bring your talents to a team that values innovation, collaboration, and your unique contributions. Apply now to advance your career and play a key role in impactful projects within a supportive and dynamic environment! About Fisher Associates: Fisher Associates is a multidisciplinary design services firm headquartered in Rochester, NY, with eight locations nationwide. The firm provides civil/site engineering, transportation engineering, electrical engineering, landscape architecture, architecture, planning, environmental, surveying, GIS, construction inspection, precast engineering and construction engineering services to public and private sector clients across numerous markets. Why You’ll Love Working at Fisher • You are empowered to achieve exceptional results through collaboration and ownership., • Your voice matters in our inclusive and transparent culture, where accessible leadership genuinely welcomes ideas and feedback., • Your growth is our priority. We offer clear career paths, tuition assistance, and ongoing learning opportunities to support your development., • You thrive in a culture that celebrates fun and fosters a relaxed, easy-going atmosphere, so you can bring the best of yourself to work every day., • Your journey is shaped by a culture of mentorship, where experienced colleagues guide your growth and you, in turn, inspire others., • Lead and execute precast engineering and design tasks efficiently., • Collaborate with project teams to deliver structurally sound, cost-effective, and visually appealing precast concrete designs., • Perform and review structural analysis and calculations to ensure safety under various loads and conditions., • Select materials and components for precast concrete production that meet strength, durability, and sustainability standards., • Create accurate drawings, plans, and specifications for precast projects aligned with industry design standards., • Support cost estimation for materials, • Support Project Managers and Designers throughout the project lifecycle., • Promote, utilize and support QA/QC processes to guarantee quality deliverables. Your Impact Matters, Your Career Thrives. Work on engaging precast engineering projects and experience first-hand the positive changes you create in your own community. Engage in diverse and challenging project opportunities that will help you grow and advance your career. We offer competitive salaries and benefits, including: • Medical, Dental & Vision Insurance, • 401(k) Plan, • Company-paid Life and Disability Insurance, • Hybrid Work Schedule, • Generous PTO and Paid Holidays, • Strong Work-life Balance, • Shareholders Program, • Professional Development Opportunities and Reimbursement, • Supplemental Benefits Designed for Total Well-being and Financial Security Actual compensation may vary based on relevant experience, qualifications/education, and other factors. The salary range is not necessarily reflective of the actual total compensation that may be earned nor promise any specific pay for any specific employee. Salary range excludes monetary value of benefits. #LI-Hybrid Requirements: What You Bring, Your Expertise as a Precast Design Engineer • B.S. degree in Civil Engineering or a related field, Master’s preferred, • 5 -10 years minimum Precast concrete design engineering experience, • Experience in precast concrete design engineering for transportation infrastructure and underground structures (utility vaults, manholes, drainage structures and pump stations) preferred, • Familiarity with ACI 318, ACI 350, ASCE-7, AASHTO, • Familiarity with IBC codes a plus, • Professional Engineering License (PE) preferred or ability to obtain it, • Proficiency in AutoCAD & RISA 3D, • Professional performance standards aligned with Fisher’s Mission, Vision, and Core Values., • Proven ability to deliver quality work through critical thinking, problem-solving, and sound judgment, • Driven to own projects, prioritize effectively, and thrive in a fast-paced, growth-focused environment, • Highly adaptable and proactive in meeting deliverables and deadlines., • Dedicated to fostering trusting relationships through collaboration integrity, respect, and active listening, • Curious, improvement-minded, and always seeking better solutions

Job Description Overview Tradesmen International is immediately hiring experienced Journeyman Iron Workers for projects located in Amherst, NY. This is a first shift opportunity and the pay rate is up to $35/hour based on experience and skill level. If you are an Iron Worker eager to master your skills while working alongside our accomplished Craft Professionals, this is your chance to advance your career! Job Scope: • Steel beam erecting, • Connecting and bolting structural steel, • Metal deck spreading, • Work on two buildings, • Assembly/millwright duties as needed Responsibilities • Ironworking/structural steel erection experience required Qualifications Tradesmen International not only offers consistent work, top pay, and employment opportunities, we also provide a benefits package that is among the best in the industry. Our comprehensive benefits include: • Tradesmen+ Rewards Program – earn points for hours worked, • Vacation Pay, • Health insurance Tradesmen International is an EO employer - M/F/Veteran/Disability Click here to visit Tradesmen’s full website.

Job Description We are looking for experienced Fitter/Fabricators. The candidates must be able to read intricate blueprints and be used to working in a custom fabrication shop. Each component is custom and must be able to transition to new projects smoothly. Weldments are large and heavy (5-50 tons) Job Description: o Read and comprehend Steel structures drawings o Fitting steel plate structures o Mark welding required on each weldment o Welding when smaller assemblies are required o Hold tolerances within 1/16th inch o Be able to plan ahead and change fitting steps to achieve desired outcomes of projects o Be able to make fixtures and other usual clamping devices to make fitting times faster and easier o Be comfortable flipping and moving 50 ton parts o Use of an iron worker • Salary is dependent on experience and capabilities; please include your salary expectations with your resume, • Great benefits: Medical with low HRA deductible., dental and vision 90% employer paid; short and long-term disability ins. 100% employer paid; life insurance policy of $50k, • Growing company with Steady work

Job Description Welder / Fabricator – 1st Shift (7:00 AM–4:00 PM) Location: Buffalo, NY Schedule: 1st Shift | 7:00 AM – 4:00 PM | Monday–Friday Employment Type: Full-Time | Overtime Available Industry: Industrial Manufacturing • Structural Steel • Modular Fabrication Job Overview GTI Fabrication is hiring an experienced 1st Shift Mechanical Welder / Fabricator for our industrial manufacturing operations in Buffalo, NY. The Welder/Fabricator will fit, tack, weld, assemble, and repair steel components, structural assemblies, and modular fabrication parts using MIG/GMAW, TIG/GTAW, Stick, and other welding processes in a high-paced production environment. Ideal candidates have experience in manufacturing welding, structural steel welding, blueprint reading, mechanical assembly, and industrial metal fabrication. Daily ResponsibilitiesWelding & Fabrication • Fit, tack, and weld carbon steel, stainless steel, and low-alloy steel using MIG/GMAW, TIG/GTAW, and manual welding, • Weld assemblies, sub-assemblies, brackets, channels, angles, and structural components per drawings, • Prepare and finish welds using grinders, saws, and welding tools, • Read and interpret blueprints, weld symbols, detail drawings, and fabrication schematics, • Measure, cut, and layout materials using calipers, squares, tape measures, and fabrication tools, • Fabricate fixtures and tooling from engineering sketches, • Assemble welded components into larger structures, frames, platforms, and modular steel units, • Inspect welds for penetration, defects, and adherence to specifications, • Repair or rework fabrication issues or dimensional deviations, • Meet production output, quality standards, and labor-hour goals, • Maintain welding machines, tools, and PPE in safe working condition, • Follow OSHA, AWS, and internal safety procedures, • Proven experience as a Welder, Fabricator, MIG Welder, TIG Welder, or Industrial Welder, • Proficiency in MIG, TIG, Stick, GMAW, GTAW, and related processes, • Experience using grinders, saws, clamps, calipers, squares, and measurement tools, • Ability to read and interpret technical drawings, blueprints, and welding schematics, • Knowledge of welding codes, safety procedures, and inspection standards, • Ability to lift 50 lbs and perform bending, kneeling, climbing, and overhead work, • Strong attention to detail and craftsmanship, • AWS Certification (GMAW, 3G Vertical Up, 4F Overhead), • Experience welding carbon steel, stainless steel, and alloy materials, • Background in structural steel, modular fabrication, or heavy manufacturing, • Knowledge of plasma cutting, torch cutting, and GTAW/TIG welding, • Understanding of fabrication tolerances and measurement verification, • Consistent 1st shift schedule (7:00 AM–4:00 PM), • Competitive pay + overtime opportunities, • Fast-growing modular and steel fabrication environment, • Work on complex, custom steel structures and large-scale fabrication projects We are an equal opportunity employer committed to a safe, inclusive, and diverse workplace. Job Type: Full-time Pay: $22.00 - $30.00 per hour Benefits: • 401(k), • Dental insurance, • Flexible spending account, • Health insurance, • Health savings account, • Life insurance, • Paid time off

Job DescriptionDescription: Precast Project Engineer - Civil/Structural Precast Project Engineer – Shape the Future of Concrete Design and Mentor the Next Generation Are you a precast concrete expert ready to lead and inspire? Fisher Associates is seeking a Precast Project Engineer to serve as a Subject Matter Expert (SME) and guide our team in designing and delivering advanced precast and prestressed concrete structures. In this key role, you’ll mentor junior engineers, ensure design excellence, and drive innovation across diverse civil and structural projects. Working with multidisciplinary teams, you’ll develop efficient, sustainable, and code-compliant precast solutions that shape the built environment. Join Fisher Associates, where your leadership, expertise, and passion for precision fuel impactful projects and professional growth. Apply today to advance your career as a leader in precast concrete engineering and help shape the future of infrastructure design About Fisher Associates: Fisher Associates is a multidisciplinary design services firm headquartered in Rochester, NY, with eight locations nationwide. The firm provides civil/site engineering, transportation engineering, electrical engineering, landscape architecture, architecture, planning, environmental, surveying, GIS, construction inspection, precast engineering and construction engineering services to public and private sector clients across numerous markets. Why You’ll Love Working at Fisher • You are empowered to achieve exceptional results through collaboration and ownership., • Your voice matters in our inclusive and transparent culture, where accessible leadership genuinely welcomes ideas and feedback., • Your growth is our priority. We offer clear career paths, tuition assistance, and ongoing learning opportunities to support your development., • You thrive in a culture that celebrates fun and fosters a relaxed, easy-going atmosphere, so you can bring the best of yourself to work every day., • Your journey is shaped by a culture of mentorship, where experienced colleagues guide your growth and you, in turn, inspire others., • Lead and execute precast engineering and design tasks efficiently., • Collaborate with project teams to deliver structurally sound, cost-effective, and visually appealing precast concrete designs., • Perform and review structural analysis and calculations to ensure safety under various loads and conditions., • Select materials and components for precast concrete production that meet strength, durability, and sustainability standards., • Create accurate drawings, plans, and specifications for precast projects aligned with industry design standards., • Support cost estimation for materials, • Support Project Managers and Designers throughout the project lifecycle., • Maintain up-to-date knowledge of codes, technologies, and advancements in the precast-prestressed field., • Promote, utilize and support QA/QC processes to guarantee quality deliverables. Your Impact Matters, Your Career Thrives. Work on engaging precast engineering projects and experience first-hand the positive changes you create in your own community. Engage in diverse and challenging project opportunities that will help you grow and advance your career. We offer competitive salaries and benefits, including: • Medical, Dental & Vision Insurance, • 401(k) Plan, • Company-paid Life and Disability Insurance, • Hybrid Work Schedule, • Generous PTO and Paid Holidays, • Strong Work-life Balance, • Shareholders Program, • Professional Development Opportunities and Reimbursement, • Supplemental Benefits Designed for Total Well-being and Financial Security. Actual compensation may vary based on relevant experience, qualifications/education, and other factors. The salary range is not necessarily reflective of the actual total compensation that may be earned nor promise any specific pay for any specific employee. Salary range excludes monetary value of benefits. #LI-HYBRID Requirements: What You Bring, Your Expertise as a Precast Project Engineer • B.S. degree in Civil Engineering or a related field, Master’s preferred, • 10 plus years of experience in precast concrete design engineering for transportation infrastructure and underground structures (utility vaults, manholes, drainage structures and pump stations)., • Familiarity with ACI 318, ACI 350, ASCE-7, AASHTO, • Familiarity with IBC codes a plus, • Professional Engineering License (PE) preferred or ability to obtain it, • Proficiency in AutoCAD & RISA 3D, • Professional performance standards aligned with Fisher’s Mission, Vision, and Core Values., • Proven ability to deliver quality work through critical thinking, problem-solving, and sound judgment, • Driven to own projects, prioritize effectively, and thrive in a fast-paced, growth-focused environment, • Highly adaptable and proactive in meeting deliverables and deadlines., • Dedicated to fostering trusting relationships through collaboration integrity, respect, and active listening, • Curious, improvement-minded, and always seeking better solutions

Job DescriptionDescription: Lead Innovative Bridge Design and Engineering Projects with Fisher Associates Fisher Associates is actively seeking a Bridge Project Engineer with a Professional Engineer (PE) license to lead bridge design, structural analysis, inspection, and load rating of transportation infrastructure projects. This role is ideal for a Civil or Structural Engineer looking to make a meaningful impact on public infrastructure with a firm known for its technical excellence and innovative approach. As a key member of our civil/structural engineering team, you’ll collaborate on multidisciplinary projects, applying your bridge engineering expertise in a supportive, growth-oriented environment. If you're a licensed PE with hands-on experience in bridge design, transportation structures, and a passion for building safe, sustainable infrastructure — we want to hear from you. About Fisher Associates Fisher Associates is a multidisciplinary design services firm headquartered in Rochester, NY, with eight locations nationwide. The firm provides civil/site engineering, transportation engineering, electrical engineering, landscape architecture, architecture, planning, environmental, surveying, GIS, construction inspection, precast engineering and construction engineering services to public and private sector clients across numerous markets. Why You’ll Love Working at Fisher • You are empowered to achieve exceptional results through collaboration and ownership., • Your voice matters in our inclusive and transparent culture, where accessible leadership genuinely welcomes ideas and feedback., • Your growth is our priority. We offer clear career paths, tuition assistance, and ongoing learning opportunities to support your development., • You thrive in a culture that celebrates fun and fosters a relaxed, easy-going atmosphere, so you can bring the best of yourself to work every day., • Your journey is shaped by a culture of mentorship, where experienced colleagues guide your growth and you, in turn, inspire others., • Lead bridge design, including load rating, structural analysis, and foundation design., • Develop design plans, specifications, and cost estimates for bridge and transportation structures., • Maintain detailed records of bridge design documents, reports, and budgets., • Participate in project planning meetings and align tasks to meet scope, schedule, and budget requirements., • Support project managers with schedules, documentation, and presentations as needed., • Ensure designs adhere to state and local standards, regulations and safety codes., • Conduct field inspections and prepare detailed bridge inspection reports and analyze foundation design, • Provide technical support during construction, respond to RFIs and attend site visits., • Provide technical support during construction, respond to RFIs and attend site visits., • Medical, Dental & Vision Insurance, • 401(k) Plan, • Company-paid Life and Disability Insurance, • Hybrid Work Schedule, • Generous PTO and Paid Holidays, • Strong Work-life Balance, • Shareholders Program, • Professional Development Opportunities and Reimbursement, • Supplemental Benefits Designed for Total Well-being and Financial Security. Actual compensation may vary based on relevant experience, qualifications/education, and other factors. The salary range is not necessarily reflective of the actual total compensation that may be earned nor promises any specific pay for any specific employee. Salary range excludes monetary value of benefits. #LI-Hybrid Requirements: What You Bring, Your Expertise as a Bridge Project Engineer • B.S. degree in Civil Engineering or a related field, with a Master’s preferred., • Over 10 years of transportation experience, structures/bridge design experience preferred, • Professional Engineering License (PE) preferred or ability to obtain it., • Proficiency in MicroStation, STAAD and Bridge Design Software., • Familiarity with state DOT design standards (NYSDOT or PennDOT preferred)., • Professional performance standards aligned with Fisher’s Mission, Vision, and Core Values., • Demonstrated high-quality work and ability to problem solve applying critical thinking, and sound judgment to challenges., • Driven to take ownership of your projects, prioritize your tasks effectively, and thrive in a dynamic, fast-paced environment that fosters personal and professional growth., • Highly adaptable and proactive in meeting deliverables and deadlines, • Dedicated to fostering trust and collaboration through integrity, respect, and active listening in client and team relationships., • Have a sense of curiosity, always looking for a better way, and a continuous improvement mindset.

Job Description Company Overview CME Associates, Inc. (CME) is an engineering technology firm providing comprehensive Construction Materials Evaluation and Technical Support Services. Our experts specialize in geotechnical engineering, construction materials evaluation, special inspections, geological sciences, subsurface exploration, and investigative engineering. Summary Perform construction special inspections and material testing services at commercial construction sites in the Greater Buffalo Area. Responsibilities • Perform tests and inspections for soils, concrete, masonry, hot mix asphalt, spray applied fireproofing, welding & bolting, geotechnical investigations, structural steel, and more for quality control/quality assurance on commercial construction job sites, • Read construction drawings and specifications and correctly interpret test results, • Complete each testing assignment accurately and in accordance with the appropriate standard, • Record and report results in a clear, concise manner, • Turn in field data records and completed reports for each project daily, • High School Diploma required, • Associate or bachelor’s degree in civil engineering / technology, or related is ideal although not necessary, • Must possess at least one International Code Council (ICC) certification for one of the following Special Inspector categories: Reinforced Concrete, Soils, Masonry, Spray Applied Fireproofing, Steel & Bolt, or Steel & Weld, or American Concrete Institute (ACI) Grade 1, or EIT (Engineer-in-Training) Certificate through a State Board, • Possess ability to maintain effective working relationships with managers, co-workers and clients through clear communication and proactive progress reporting Benefits CME offers competitive wages and all benefits listed here: Health, Dental, Vision, 401K, Health Savings Account, Supplemental Insurance Products, and Paid Time Off (including Holiday, Vacation, Sick and Personal). All benefits become available to eligible full-time employees upon completion of an eligibility period. This is an Equal Employment Opportunity. All qualified applicants will be afforded equal employment opportunity without regard to race, color, sex, age, marital status, sexual orientation, gender identity, religion, national origin, disability, status as a protected veteran, or any other characteristic protected by federal, state, and local laws. CME Associates, Inc. is an Affirmative Action Employer. A New York State Certified Woman Owned Business Enterprise (WBE). Powered by JazzHR PGSbKB47GS

Job Description Stellar Roofing is seeking dedicated and skilled Roof Shingle Installer’s to join our growing team with experience working with Metal/Asphalt Roofs. This role involves the proper installation of roofing shingles on residential structures, ensuring waterproofing, durability, and aesthetic appeal. If you're familiar with shingling techniques, comfortable using air tools, and committed to safety and craftsmanship, we want to hear from you! Key Responsibilities: Qualifications: • Proven experience in shingle roofing installation on both residential buildings., • Experience working with Metal/Asphalt Roofs., • Familiarity with roofing materials, including asphalt shingles, underlayment, flashing, and waterproofing membranes., • Comfortable working at heights, lifting heavy materials (80 lbs or more), and using air-powered tools such as nailers., • Ability to read and follow construction plans and specifications., • Strong attention to detail, safety awareness, and craftsmanship., • Competitive pay with weekly team productivity bonuses., • Opportunities to learn and grow your roofing skills., • Supportive, safety-focused team environment., • Competitive salary, • Weekly bonuses for team productivity, • Health, dental, and vision insurance options, • 401(k) with matching contributions, • 401(k), • 401(k) matching, • Dental insurance, • Employee discount, • Health insurance, • On-the-job training, • Opportunities for advancement, • Paid time off, • Referral program, • Retirement plan Job Type: Full-time Benefits: • 401(k) matching, • Dental insurance, • Health insurance, • Paid time off, • Vision insuranceCompany DescriptionStellar Roofing is a leading provider of residential and commercial roofing solutions, known for our commitment to quality, safety, and customer satisfaction. We pride ourselves on delivering exceptional roofing services to a diverse range of clients. We are seeking a skilled and experienced Roofer to join our dynamic team.Stellar Roofing is a leading provider of residential and commercial roofing solutions, known for our commitment to quality, safety, and customer satisfaction. We pride ourselves on delivering exceptional roofing services to a diverse range of clients. We are seeking a skilled and experienced Roofer to join our dynamic team.

Job Description Mechanical/Electrical Assembler – 1st Shift (7:00 AM–4:00 PM) Location: Buffalo, NY (On-Site) Department: GTI Energy – Manufacturing Employment Type: Full-Time | Non-Exempt About GTI Fabrication GTI Fabrication is a leader in industrial manufacturing, modular construction, metal fabrication, and container-based structures. We engineer and assemble modular energy storage enclosures, electrical control houses, steel structures, and containerized systems for the defense, military, commercial, and energy industries. Our Phoenix facility specializes in mechanical assembly, electrical integration, HVAC installation, industrial wiring, and fabrication work. The Mechanical/Electrical Assembler plays a critical role in building and integrating components into these modular systems. Position Overview The Mechanical/Electrical Assembler performs hands-on assembly, wiring, installation, and integration of mechanical, electrical, and HVAC components into modular industrial enclosures. This role is ideal for candidates with experience in mechanical assembly, electrical assembly, HVAC installation, construction labor, or industrial production assembly. This is a 1st shift position: Monday–Friday, 7:00 AM–4:00 PM. Key ResponsibilitiesComponent & System Assembly • Assemble and integrate mechanical, electrical, and structural components into modular energy storage enclosures, • Cut, drill, mount, and fasten mechanical components, structural parts, brackets, ducts, and hardware, • Run conduit, pull wire, route cables, terminate connections, and mount electrical devices, • Use multimeters and diagnostic tools to test circuits and verify electrical continuity, • Safely operate drills, impacts, grinders, saws, and various assembly tools, • Experience as a Mechanical/Electrical Assembler, Mechanical Assembler, Electrical Assembler, HVAC Installer, or Industrial Assembler, • Ability to read and follow blueprints, wiring diagrams, and mechanical drawings, • Skilled with hand tools and power tools (drills, impacts, grinders, saws, etc.), • Experience with basic electrical tasks and multimeter use (preferred), • Ability to lift 50 lbs and work in a manufacturing environment, • Strong attention to detail and commitment to safety, • Experience with modular assembly, energy storage enclosures, container-based construction, or industrial fabrication, • Mechanical assembly in a production or fabrication environment, • Basic HVAC installation experience, • OSHA training or industrial safety experience Why Join GTI? • 1st shift schedule — 7:00 AM–4:00 PM, • Competitive pay and benefits, • Fast-growing manufacturing environment, • Work with cutting-edge modular energy and industrial systems Job Type: Full-time Pay: $20.00 - $23.00 per hour Benefits: • 401(k), • Dental insurance, • Health insurance, • Life insurance, • Paid time off Company DescriptionGTI specializes in the design, engineering, fabrication, and deployment of custom modular structures, shipping container-based structures, and ballistic metal fabrication. We serve multiple industries, including DOD contractors, military, disaster relief, and commercial markets. Our containerized and modular solutions are all built in-house at our factory in Buffalo, NY. Manufacturing capabilities range from military training, live fire enclosures, bathroom/shower units, expeditionary camps, medical facilities, water treatment, electrical/energy storage enclosures, and much more.GTI specializes in the design, engineering, fabrication, and deployment of custom modular structures, shipping container-based structures, and ballistic metal fabrication. We serve multiple industries, including DOD contractors, military, disaster relief, and commercial markets. Our containerized and modular solutions are all built in-house at our factory in Buffalo, NY. Manufacturing capabilities range from military training, live fire enclosures, bathroom/shower units, expeditionary camps, medical facilities, water treatment, electrical/energy storage enclosures, and much more.

Job DescriptionDescription Challenging Bridge Projects. Grow your Career. Build the Future. Are you a skilled bridge engineer with a passion for delivering high-quality infrastructure solutions? We’re seeking a Bridge Engineer to join our Western New York Transportation Department and help us deliver some of the largest and most complicated infrastructure projects in Upstate New York. Our Western New York Bridge team is expanding, and we’re excited to offer you the opportunity to be part of the largest bridge program in our team's history. With active projects in nearly every county across the region, you'll play a key role in shaping critical infrastructure. This unprecedented workload not only brings meaningful technical challenges to keep you engaged and learning, but also opens the door to unlimited career growth. If you're looking to make a real impact while advancing your professional journey, there's never been a better time to join us. In this role, you’ll support bridge engineering projects from initial planning and design through construction support. Working under the guidance of senior engineers, you’ll contribute to structural analyses, prepare design documents, and assist with field inspections. You’ll bring a strong foundation in civil or structural engineering, a willingness to learn, and a collaborative mindset to help deliver innovative, sustainable, and cost-effective solutions. You’ll also play a key role in shaping two of the most impactful infrastructure efforts in Upstate New York: the I-81 Viaduct Project and the Onondaga County/Micron Transportation Improvements—projects that will redefine mobility and connectivity in Central New York. With these transformative projects driving unprecedented momentum, our team is growing rapidly—and so are the opportunities. You’ll step into a role with clear pathways for advancement, the chance to shape the future of our department, and the support, visibility, and resources to take your career wherever you want it to go. Position Responsibilities • Bridge Design: Work on every aspect of bridge design projects, including inspection, structural calculations, geometry layout, plan development, and construction coordination., • Project Development: Assist in progressing bridge projects through the design process, including report writing, environmental permit coordination, and development of contract specifications., • Bachelor’s degree in Civil Engineering or a related field., • 0-5 years of experience in bridge design, • Proficiency in AutoCAD/Civil 3D and/or MicroStation/OpenRoads Estimated Salary Range: $73,424 - $104,624* Benefits: Comprehensive health, dental, and vision insurance, life and disability coverage, accident and critical illness insurance, flexible spending accounts, 401(k) plan with company match, generous paid time off (PTO), flexible/hybrid scheduling, tuition reimbursement, employee assistance program (EAP), wellness programs, parental leave, professional development opportunities, employee discounts, and referral program. For more detailed information, please visit C&S Comprehensive Benefits. WHO WE ARE: At C&S Companies, we believe that a great job is about more than just the work—it’s about the people, the culture, and the opportunity to grow. We foster a family-friendly, collaborative, and employee-focused workplace grounded in quality, integrity, trust, fun, and accountability. Belonging is a top priority: we are committed to cultivating and sustaining a safe, inclusive atmosphere where everyone feels valued, supported, and empowered to thrive. C&S is a national planning, design, and construction firm with more than 600 employees and growing. For over 50 years, we’ve delivered critical infrastructure services across aviation, transportation, civil/site infrastructure, planning, sustainability, construction and program management, energy, environmental, facilities, and architecture. We have offices throughout New York State and in California, Florida, Michigan, Arizona, Pennsylvania, Ohio, Washington, and Kentucky. Equal Opportunity Employer/Protected Veterans/Individuals with Disabilities This employer is required to notify all applicants of their rights pursuant to federal employment laws. For further information, please review the Know Your Rights notice from the Department of Labor.

Job Description At C&S Companies, we believe work environment, culture, and the opportunity to learn and grow are key elements when considering an internship. We are just the right size to provide the resources and support you need without the burdensome bureaucracy of a large corporate environment. To that end, we foster a family-friendly and supportive workplace; collaborative and employee-focused with an emphasis on quality, integrity, trust, fun and accountability. Position Overview As an intern on our Transportation team, you will be an integral part of projects and support key members of our team. Our internship program provides all interns an opportunity to meet with leadership and work with mentors on both professional and technical development. We also have a lot of fun – between company events, intern socials, and team bonding, our interns become a part of our ONE C&S mentality. Position Responsibilities: • Bridge layout using Microstation and AutoCad and to perform day to day tasks, • Bridge design and detailing, report writing and estimating, following the phase I-VI NYSDOT design process., • work closely with senior engineers, • Occasional field visits and/or construction support, • Utilize safe work practices in accordance with federal, state, local, and company standards, • Communicate incidents, accidents, near misses, potential hazards, and unsafe working conditions to a supervisor or the Health and Safet Department as soon as identified Required Knowledge, Skills & Abilities • Pursuing a Bachelor’s degree in Civil Engineering with an emphasis on Structural Engineering, or another related field. Completion of sophomore year preferred., • Knowledge of AutoCAD or other 3D modeling systems, • Strong analytical, conceptual, and problem-solving skills $16.00 - $23.00/hr* Learn about our comprehensive Benefits *Actual compensation may vary based on related work experience, geographical location and market conditions, education/training, certifications, and other credentials, as well as applicable knowledge and skills. WHO WE ARE: C&S Companies is a national planning, design, and construction firm with more than 600 employees and growing. For more than 50 years we have been delivering critical infrastructure design, planning and construction services in aviation, civil/site infrastructure, construction and program management, construction/design-build, energy, environmental, facilities, architecture, planning, sustainability, and transportation. We have offices throughout New York State, California, Florida, Michigan, Arizona, Pennsylvania, Ohio, Washington, and Kentucky.

Job DescriptionJob Title: CAD AdministratorLocation: Goodyear, AZ (On-Site) Department: Engineering Reports To: Director of Engineering Employment Type: Full-Time | ExemptAbout GTI EnergyGTI Energy, a division of GTI Fabrication, is a leader in industrial modular fabrication—serving energy, defense, and heavy industrial markets. With advanced engineering and manufacturing facilities in Arizona and New York, GTI designs and builds mission-critical modular systems, including data centers, enclosed battery systems, and energy storage devices.As we continue to expand, we are enhancing our engineering systems infrastructure to drive collaboration, efficiency, and precision across mechanical, electrical, and structural design disciplines.Position OverviewGTI Energy is seeking a skilled CAD Administrator to lead the implementation, management, and optimization of GTI’s CAD and design data systems. This individual will serve as the technical expert and process owner for SolidWorks, SolidWorks PDM, AutoCAD, Revit, and related engineering tools used across the company.The CAD Administrator will be responsible for maintaining system integrity, standardizing workflows, enforcing design standards, and ensuring all engineering teams—mechanical, electrical, and structural—operate efficiently and cohesively.This is a hands-on role requiring both strategic and tactical ownership of CAD systems, templates, and data management processes.Key ResponsibilitiesSystem Administration & Configuration • Administer and maintain GTI’s CAD environment, including SolidWorks 3DExperience, SolidWorks PDM, AutoCAD, and Revit., • Lead the migration from 3DExperience to SolidWorks PDM, overseeing configuration, data migration, and user adoption., • Manage user access, workflows, and permissions within CAD/PDM platforms to ensure compliance and data integrity., • Maintain system templates, drawing standards, and libraries for consistency across disciplines., • Support integration between CAD systems and GTI’s Dozuki work instruction software to ensure seamless flow of engineering data to the production floor.Training & Support, • Develop and deliver user training on CAD best practices, standards, and PDM workflows., • Provide first-line support for CAD-related issues, troubleshooting modeling, file management, and workflow challenges., • Coach engineers and designers on efficient modeling techniques, revision control, and system utilization.Process Development & Standardization, • Establish and enforce company-wide CAD standards for file naming, revision management, and design documentation., • Collaborate with mechanical, electrical, and structural engineering teams to align processes across product lines., • Partner with manufacturing engineering to ensure design outputs are production-ready and optimized for fabrication.Engineering Systems Leadership, • Act as GTI’s subject matter expert for CAD/PDM system selection, configuration, and continuous improvement., • Participate in defining GTI’s long-term CAD and design systems roadmap., • Evaluate and recommend tools to improve collaboration, version control, and design throughput.Cross-Functional Collaboration, • Work closely with the IT, Engineering, and Operations teams to align CAD system capabilities with business needs., • Coordinate with suppliers and external engineering partners to ensure compatibility and compliance with GTI data standards., • Support new product introduction (NPI) and design change processes through proper CAD/PDM integration.Required Qualifications, • Bachelor’s degree in Mechanical, Industrial, or Design Engineering—or equivalent experience., • 5–8 years of experience administering SolidWorks, AutoCAD, or Revit environments in a manufacturing or industrial setting., • Demonstrated expertise in SolidWorks PDM (Professional or Manage) setup, workflow design, and user management., • Strong understanding of mechanical, electrical, and structural design principles and how they integrate in complex assemblies., • Experience developing and maintaining CAD standards, templates, and libraries., • Excellent communication, documentation, and cross-functional collaboration skills., • Proven ability to train and mentor design teams across disciplines.Preferred Qualifications, • Experience leading CAD system migrations (e.g., from 3DEXPERIENCE to PDM)., • Familiarity with industrial fabrication, modular steel construction, or energy storage systems., • Exposure to PLM systems or 3DEXPERIENCE, even if not directly responsible for implementation., • Experience integrating CAD data into work instruction platforms (Dozuki or similar)., • Knowledge of lean manufacturing principles and design-for-manufacturability (DFM) practices.Why Join GTI Energy, • Shape the future of GTI’s digital engineering systems infrastructure., • Collaborate with world-class engineers across multiple disciplines., • Competitive salary, benefits, and growth opportunities., • Be part of an innovation-driven team building mission-critical modular solutions for global markets.

Job Description Hohl Industrial Services is currently seeking a Structural Detailer to assist our Fabrication team in the daily activities of the detailing department to create shop fabrication & erection drawings in accordance with contract requirements. Responsibilities: • Using a 3D drafting software (Tekla Structures), develops Assembly or layout drawings for large structural steel projects for approval., • Communicate with the Project Manager during the development of the approval drawing to ensure customers' objectives are being met with the proposed design., • Submits Request for Information (RFI's) to the Project Manager for resolution when required., • Responsible on a functional level to the Project Manager responsible for the project to whom he/she is currently assigned., • Receives directions from the Project Manager as to the overall technical requirements and scope of each project., • Conducts field measurement of existing equipment and building details where required to interface or interconnect with the new equipment or structure, with assistance of field personnel where required., • Communicates and attends meetings with the customer, as required for clarity of direction in meeting the customer's project objectives., • Revises approval drawings as required by customer's comments, with approval of the Project Manager., • Upon return of approval drawings to Hohl Industrial, develops all mechanical, structural, pneumatic, hydraulic, and piping details necessary for completion of the shop drawings, using standard Hohl formats for mechanical equipment and structural steel, AWS weld symbols, ANSI pneumatic and hydraulic symbols, or the customer's standard formats as directed by the Project Manager., • Issues cutting lists and drawings to the Shop Foreman, with approval of the Project Manager, using the appropriate Release Form., • Issues drawings to the Project Manager to be used by field personnel., • Answers questions from Shop Foremen, Shop employees and Hohl field Foremen and Field Project Managers regarding drawing issues., • Maintains a record of all drawings currently in the shop, marked-up to indicate as-built changes. Modifies drawings for prior to closing job., • Issues final steel erection and equipment drawings to the Project Manager for record., • Provides concept drawings for inclusion with quotations., • Complete design, detail and coordination responsibility for small shop fabrication jobs, • All other duties assigned. Qualifications: • High School Diploma or equivalent (GED)., • 3-5 years of experience using 3D drafting software., • Prefer experience with Tekla Structures., • 3-5 years of experience detailing structural steel., • Experience with AISC/AWS drawing and detailing standards., • Experience in producing shop and erection drawings for projects typical to the industry., • Completion of the AISC/NSID Steel Detailing Course is preferred, but not mandatory., • Knowledge of AISC Code of Standard Practice for Steel Building and Bridges preferred but not required., • Knowledge of AWS welding codes including D1.1, D1.5, D1.6, and D1.2., • Basic knowledge of NDE methods including MT, PT, UT, & RT., • Basic welding process knowledge FCAW, GMAW, GMAW-S, SAW, & SMAW., • Proficient with Microsoft Office Applications., • Eagerness to learn and grow within the industrial construction sector. Who we are: Hohl Industrial Services, Inc. established in 1950, with headquarters in Tonawanda, NY, is a full-service specialized organization that provides for a diverse industrial clientele. Hohl offers a unique range of field, shop, technical, equipment sales and services. With our professional staff of engineers, project managers, skilled tradespeople, fabricators and machinists, we are able to thoroughly study and develop a customized plan to meet all of our client's needs. Combining this with our innovative strategies and techniques, added with our experienced field personnel, we administer these plans in a safe, expedient and economical measure. Hohl Industrial Services is a certified AISC fabricator and erector. Additionally we maintain CWB, NYDOT, ODOT, AWS, ASME and ISO certifications We are an equal opportunity employer and all qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identify, national origin, or any other characteristic protected by law Job Posted by ApplicantPro

Job Description Hohl Industrial Services is currently seeking a Tekla Structures Detailer/Draftsman to assist our Fabrication team in the daily activities of the detailing department to create shop fabrication & erection drawings in accordance with contract requirements. Responsibilities: • Using Tekla Structures drafting software, develops Assembly or layout drawings for approval., • Communicate with the Project Manager during the development of the approval drawing to ensure customers' objectives are being met with the proposed design., • Submits Request for Information (RFI's) to the Project Manager for resolution when required., • Responsible on a functional level to the Project Manager responsible for the project to whom he/she is currently assigned., • Receives directions from the Project Manager as to the overall technical requirements and scope of each project., • Conducts field measurement of existing equipment and building details where required to interface or interconnect with the new equipment or structure, with assistance of field personnel where required., • Communicates and attends meetings with the customer, as required for clarity of direction in meeting the customer's project objectives., • Revises approval drawings as required by customer's comments, with approval of the Project Manager., • Upon return of approval drawings to Hohl Industrial, develops all mechanical, structural, pneumatic, hydraulic, and piping details necessary for completion of the shop drawings, using standard Hohl formats for mechanical equipment and structural steel, AWS weld symbols, ANSI pneumatic and hydraulic symbols, or the customer's standard formats as directed by the Project Manager., • Issues cutting lists and drawings to the Shop Foreman, with approval of the Project Manager, using the appropriate Release Form., • Issues drawings to the Project Manager to be used by field personnel., • Answers questions from Shop Foremen, Shop employees and Hohl field Foremen and Field Project Managers regarding drawing issues., • Maintains a record of all drawings currently in the shop, marked-up to indicate as-built changes. Modifies drawings for prior to closing job., • Issues final steel erection and equipment drawings to the Project Manager for record., • Provides concept drawings for inclusion with quotations., • Complete design, detail and coordination responsibility for small shop fabrication jobs, • All other duties assigned. Qualifications: • High School Diploma or equivalent (GED)., • 3-5 years of experience using Tekla Structures., • Experience with AISC/AWS drawing and detailing standards., • Experience in producing shop and erection drawings for projects typical to the industry., • Completion of the AISC/NSID Steel Detailing Course is preferred, but not mandatory., • Knowledge of AISC Code of Standard Practice for Steel Building and Bridges preferred but not required., • Knowledge of AWS welding codes including D1.1, D1.5, D1.6, and D1.2., • Basic knowledge of NDE methods including MT, PT, UT, & RT., • Basic welding process knowledge FCAW, GMAW, GMAW-S, SAW, & SMAW., • Proficient with Microsoft Office Applications., • Experience with AutoCAD or SolidWorks preferrable., • Eagerness to learn and grow within the industrial construction sector. Who we are: Hohl Industrial Services, Inc. established in 1950, with headquarters in Tonawanda, NY, is a full-service specialized organization that provides for a diverse industrial clientele. Hohl offers a unique range of field, shop, technical, equipment sales and services. With our professional staff of engineers, project managers, skilled tradespeople, fabricators and machinists, we are able to thoroughly study and develop a customized plan to meet all of our client's needs. Combining this with our innovative strategies and techniques, added with our experienced field personnel, we administer these plans in a safe, expedient and economical measure. Hohl Industrial Services is a certified AISC fabricator and erector. Additionally we maintain CWB, NYDOT, ODOT, AWS, ASME and ISO certifications We are an equal opportunity employer and all qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identify, national origin, or any other characteristic protected by law Job Posted by ApplicantPro

Job Description BIDCO Marine Group, Inc. - Senior Estimator / Civil Engineer Position Overview We are seeking an experienced Estimator/Civil Engineer to lead the preparation of competitive, accurate cost estimates for complex underwater, marine, and heavy civil construction projects. BIDCO specializes in the construction and rehabilitation of critical waterfront infrastructure throughout the Great Lakes, Northeast, and Atlantic Seaboard regions, including: • Municipal water intakes and outfalls, • Subaqueous pipelines and cables, • Construction and maintenance of navigational locks and flood-control structures, • Construction and maintenance of energy-related infrastructures at hydroelectric and nuclear power generating plants, • Piledriving, bulkheads, cofferdams, and associated temporary works, • Demolition and close out of remnant coal power infrastructures. Compensation & Benefits • Full-time salaried position (highly competitive, salary commensurate with experience), • Comprehensive health insurance, paid holidays, flexible scheduling, generous vacation, • 401(k) with company match, • Travel per diem and corporate card, • Relocation assistance available, • Perform detailed quantity take-offs from plans and specifications, • Develop comprehensive cost estimates for labor, materials, equipment, and subcontractors, • Select optimal construction means and methods for marine and heavy civil work, • Estimate specialized scopes including driven piling, underwater concrete, structural steel, and mechanical systems, • Design or coordinate the design of temporary works (cofferdams, shoring, formwork, falsework, templates, etc.), • Solicit, negotiate, and analyze subcontractor and supplier quotations, • Lead bid-closeout analysis and final proposal assembly, • Assist in writing technical narratives and project schedules, • Bachelor’s degree in civil engineering or construction management (required), • Minimum 5 years of progressive experience in heavy civil/marine estimating and project engineering, • Proven track record estimating projects valued from $5M–$50M+, • Expert-level quantity take-off and cost-analysis skills, • Strong working knowledge of temporary marine structures and dewatering systems, • Excellent written and verbal communication skills, • Ability to thrive in a fast-paced environment and manage multiple bids simultaneously, • Team-oriented leader who earns respect through competence, decisiveness, and collaboration, • Results-driven with a focus on accuracy, profitability, and client satisfaction Company DescriptionBIDCO Marine Group, Inc. is an equal opportunity employer. Veterans are respected here and are strongly encouraged to apply. If you have a passion for complex marine / underwater infrastructure and a proven ability to deliver winners and successful projects, I would like to hear from you. This is a career position as a key member of our team with avid project responsibility, it could be one the most interesting positions you have ever held; our work is vastly different every job, we work underwater and our scope is never quite the same. BIDCO (Buffalo Industrial Diving Company) has been in business 33 years and 2025 broke all revenue/margin records across the board, which has fueled a major investment and recapitalization of the company by its two principals. Ready for an exciting change? Come visit me, check us out and kick the tires on something new, with better pay and more appreciation for what you do than where you are currently doing it now. Send your resume and work history right to Mark Judd (Pres. & Founder) at , call me on my cell phone, stop in and meet Kim at the front desk, or apply directly on ZipRecruiter. Check our projects at bidcomarine.com (very outdated, sorry) and come help us build the next big one. Thank you for looking!BIDCO Marine Group, Inc. is an equal opportunity employer. Veterans are respected here and are strongly encouraged to apply.\r\n\r\nIf you have a passion for complex marine / underwater infrastructure and a proven ability to deliver winners and successful projects, I would like to hear from you. This is a career position as a key member of our team with avid project responsibility, it could be one the most interesting positions you have ever held; our work is vastly different every job, we work underwater and our scope is never quite the same. \r\n\r\nBIDCO (Buffalo Industrial Diving Company) has been in business 33 years and 2025 broke all revenue/margin records across the board, which has fueled a major investment and recapitalization of the company by its two principals.\r\n\r\nReady for an exciting change? Come visit me, check us out and kick the tires on something new, with better pay and more appreciation for what you do than where you are currently doing it now.\r\n\r\nSend your resume and work history right to Mark Judd (Pres. & Founder) at , call me on my cell phone, stop in and meet Kim at the front desk, or apply directly on ZipRecruiter.\r\n\r\nCheck our projects at bidcomarine.com (very outdated, sorry) and come help us build the next big one. Thank you for looking!

Job Description General labor for Drainage / Foundation repair Company..... Assist in the installation of interior and exterior drainage systems,sump pump systems, wall crack repair, masonry projects, and more ! Company DescriptionInstall drainage systems in basements and yards, sump pumps, foundation repair / structural repair , masonry / concrete finishingInstall drainage systems in basements and yards, sump pumps, foundation repair / structural repair , masonry / concrete finishing

Job Description Senior Structural Engineer (Hybrid) Location Options: Williamsville, NY | Rochester, NY | Albany, NY | Atlanta, GA | Buffalo, NY | Upper Arlington, OH | Eau Claire, WI | Meriden, CT | Minneapolis, MN | Hauppauge, NY | Syracuse, NY | Richmond, VA | Alexandria, VA | Voorheesville, NY (Preference for New York offices; must be within commuting distance to an office. This is a hybrid role, not remote.) About the Company Our client is an innovative architecture, engineering, energy efficiency, and construction management firm that partners with both private and public entities to deliver comprehensive facility and infrastructure solutions. Founded in 1940 as a small civil engineering and surveying firm in Western New York, the company has grown into a full-service organization with professional engineers across all disciplines, as well as architects, landscape architects, construction managers, planners, and interior designers — all united by a shared commitment to collaboration, quality, and integrity. Why Join the Team • Amazing company culture and collaborative work environment, • Competitive salary and performance-based growth, • Comprehensive benefits package: Medical, Dental, Vision, 401(k) with company match, • Generous PTO and 9 paid holidays, • HSA and FSA options, • Career advancement opportunities through structured Career Development Plans, • Tuition reimbursement and professional development support, • Work-life balance focus and wellness programs Position Overview We are seeking an experienced and licensed Senior Structural Engineer to join our growing multidisciplinary team. In this role, you will lead the design and analysis of high-profile structural projects, collaborating with architects, engineers, and construction professionals across multiple disciplines. This position offers the opportunity to make a lasting impact on the built environment while contributing to the success of major company programs. Key Responsibilities • Lead the analysis, design, and computer modeling of structural systems., • Coordinate with architectural, mechanical, electrical, and civil disciplines to ensure project integration and success., • Prepare detailed plans, drawings, and technical specifications., • Conduct construction administration activities including shop drawing review and field observation., • Interpret, organize, and coordinate complex assignments independently., • Explore innovative engineering solutions and develop novel technical concepts., • Serve as a technical liaison within and outside the organization., • Manage projects from concept through construction, ensuring compliance with structural codes and standards., • Conduct facility assessments, draft technical reports, and prepare documentation., • Mentor junior engineers, interns, and CAD technicians., • Participate in client, project, and team meetings., • Occasional travel to local and non-local project sites as required. Qualifications • Bachelor’s Degree in Structural or Civil Engineering (focus in Structural Engineering required)., • 10–20 years of progressive experience in structural engineering., • Professional Engineer (PE) license required; Structural Engineer (SE) license preferred or required., • Proficiency in structural engineering software (Bentley RAM products) and 3D modeling tools (Revit, AutoCAD)., • Strong technical and problem-solving skills with proficiency in Microsoft Excel and BlueBeam., • Excellent communication, time management, and technical writing skills., • Deep understanding of structural codes and standards (ASCE 7, AISC 360, ACI 318, etc.)., • Experience designing with a wide range of materials including steel, concrete, masonry, and wood.

Job Description STRUCTURAL BUILDING SYSTEMS ENGINEER (BSE) II As a Building Systems Engineer, you are responsible for the design of building systems for projects across our practice areas, elevating their capabilities and creating a more sustainable world in the process. You would be part of a team whose structural engineering services are grounded in the use of advanced engineering techniques, diverse material selection and sustainability measures. What You'll Do • Conduct code research in support of project development, • Research and apply current technology and stay abreast of new and upcoming technologies, • Analyzes reports, drawings, etc. to plan and design a project., • Execute design calculations and quantity/cost estimates for buildings., • Develop and prepare project specifications for structural building projects., • Research code issues and develop educated strategies to satisfy code requirements. What You Bring to the Table Must Have: • Bachelor’s degree in Civil Engineering or a related field, • A minimum of eight (8) years of structural engineering experience, • AutoCAD/Revit experience, • Design program experience such as Enercalc, RISA, Bentley Structural System or equivalent required, • Professional Licensure, • Ability to interact effectively across organizational boundaries to achieve goals and meet deadlines What You'll Be Part Of As the Building Systems Engineer, you will be part of a team that provides mindful structural design for clients in healthcare, K-12 education, higher education, communities, municipalities, industrial sectors and more. What We Offer: CPL cares about your future with us! That’s why we offer the following benefits to you and your family: • Internal Mobility & Career Advancement, • Healthcare for you and your family including spouse coverage: Medical, Dental, Vision & Prescription insurances. Single Plans with 100% paid premium, • Flexible Time Off + 8 Holidays a year, • Retirement Savings Plan - Contribution from CPL to grow your retirement funds., • Tuition Assistance: You may be eligible for continuing education assistance., • Student Loan Assistance Program: CPL will contribute up to a maximum of $100 a month for 5 years ($6,000 total) towards student loan debt., • Licensure Assistance, • Long-Term Disability Insurance Company/team member premium sharing, • Flexible Spending Account $5,000 dependent childcare annually paid 100% by team member pre-taxes., • FREE Life Insurance and AD+D Insurance, • Voluntary Short-Term Disability Insurance WHAT DOES IT LOOK LIKE WORKING HERE? We believe that building a strong community is about establishing a prevailing sense of fellowship among our team members, friends, and neighbors. • Collaboration – working with others towards the best solution, placing great emphasis on the collective wisdom of our internal teams., • Family – celebrating others’ successes, genuinely caring about the happiness and well-being of our team members and recognizing their own families as extensions of the CPL family., • Fun – not taking oneself too seriously, fully understanding that fun at work is conducive to productivity., • Inspiration – contributing to an uplifting workplace that facilitates growth and success by maintaining a positive, upbeat attitude., • Integrity – doing what is ethically right and providing reliable follow-through on commitments., • Ingenuity – seeking new opportunities and consistently identifying unexpected and practical ways to solve problems. The rate for this position generally ranges between 88K-133K $annually. This range is a good faith estimate provided pursuant to the New York Pay Transparency Law. It is based on what a successful New York applicant might be paid and assumes that the successful candidate will be in New York or perform the position from New York. Similar positions located outside of New York will not necessarily receive the same compensation. Actual pay rates may vary from the range, as permitted by New York Equal Pay Transparency Law. Compensation offers will be based on various factors, including operational needs, individual education, qualifications and experience, work location and comparison to employees already in the role, as well as other considerations permitted by law. A potential new employee's pay history will not be used in compensation decisions. CPL is an Equal Opportunity Employer, and as such affirms the right of every person to participate in all aspects of employment without regard to gender, race, color, religion, national origin, ancestry, age, marital status, sexual orientation, pregnancy, disability, citizenship, military or veteran status, gender expression and/or identity, or any other status or characteristic protected by federal, state, or local law. CPL does not accept unsolicited resumes from recruiting professionals or agencies, nor do we accept resumes from any source that does not reference a specific, open position. CPL will not be responsible for any fees arising from the use of resumes submitted by recruiting professionals or agencies that do not have a current placement fee agreement with CPL. All initial communication with recruiting professionals or agencies must go through our Talent Acquisition Team. What

Job DescriptionEncorus Group is seeking a full-time Senior Nondestructive Examination (NDE) Inspector for our West Seneca, NY office. In this role, you will conduct precise testing and inspections of equipment both in the field and in our laboratory. You will also be responsible for maintaining the equipment and facilities used for testing. Additionally, you will provide coaching and training to less experienced technicians, ensuring high standards across the team. Responsibilities: • Conduct structural steel inspections, weld inspections, special inspections, and other related field inspections, and generate detailed inspection reports as required., • Perform various NDE inspections, including Liquid Penetrant Testing, Magnetic Particle Inspections, Ultrasonic Testing, and Visual Inspections., • Build and maintain strong customer relationships., • Interpret customer specifications and read technical construction drawings to ensure that examinations meet established customer and code requirements., • Accurately follow established testing procedures, ensuring all tests are conducted per the procedure, that test equipment operates within specified parameters, and that examination variables and results are thoroughly documented., • Inspect facilities where materials are used and stored to ensure compliance with Federal, State, and local regulations and ordinances., • Utilize computer software, including tablets, computers, and cell phones, for documentation and communication purposes.Qualifications:, • A minimum of five (5) years of experience in Non-Destructive Testing or a related field., • Level II qualification in at least two Nondestructive Testing methods (e.g., PT, MT, RT, VT, UT, ET)., • Ability to obtain and maintain certifications from ACI, NICET, ICC, and AWS as required by the company., • Proficiency in technical methods and procedures for conducting nondestructive testing of equipment or parts in the field or laboratory, as well as related mathematical procedure, • High School Diploma or GED, • Valid driver’s license and ability to drive for sample collection, field tests, and inspections., • Ability to comply with company drug screening, including pre-employment tests., • Ability to perform job functions with personal protective equipment, and adverse weather conditions and to climb ladders to access equipment at heights.Preferred Qualifications: Join Us! At Encorus, we value innovation, collaboration, and professional development. We offer a competitive benefits package, opportunities for career advancement, paid training and flexible scheduling. If you’re ready to take your career to the next level and make a significant impact, we want to hear from you! Visit our careers page at to learn more and to apply. Powered by JazzHR bGQKLiIo6n

Job Description We are currently hiring a Senior Plumbing and Fire Protection Engineer in our Building Engineering division at our Buffalo, NY office. The Building Engineering Division at LaBella provides complete building engineering services including mechanical, electrical, plumbing, and structural engineering. Services range from feasibility studies and analysis through project design and construction. Our engineers are well versed in new construction, renovations, additions, analysis, special structures, and design/build projects for a variety of clients. The Senior Plumbing and Fire Protection Engineer will work with clients to provide plumbing, and fire protection designs, studies and technical support as required to fulfill project requirements. Typical projects will involve field work, design, and construction administration services. A successful candidate will be able to work well in a team, provide leadership to Jr Engineers, and be capable of developing new business. This position offers the opportunity to transition into a leadership role for the office. Duties • Supervise plumbing and fire protection engineering staff to develop concepts, strategies, construction documents and engineering reports for new buildings and renovation projects., • Ability to provide mechanical leadership for both large multi-discipline design projects including plumbing, process piping systems, and fire protection design., • Responsible for code review of plumbing and fire protection systems., • Responsible for plumbing and fire protection design related to corrections, higher education, laboratory, medical, and other typical market sectors., • Ability to complete fire protection hydraulic calculations using industry software programs., • Interact directly with clients technically by completing analysis of design options, cost benefit comparisons, and communicating results to assist owner in decision making process., • Responsible for directing plumbing and fire protection project team to meet project goals and maintain quality work product., • Manage the mechanical project financial performance and schedule., • Client and Business Development., • Proposal writing to initiate new business., • Maintain client relationships. Salary Range: $90,000 - $120,000 per year The specific salary offered may be influenced by a variety of factors including but not limited to the candidate's relevant experience, education, and work location. Requirements • Minimum of 10 years of experience with a professional A/E services firm is preferred, • Bachelor’s degree in Mechanical Engineering is preferred, • Strong writing, organizational and communications skills, • Ability to work under pressure, and multi-task efficiently Body, mind, and wallet—LaBella’s benefits support a holistic approach to your health and wellness, creating the foundation for physical, mental, and financial well-being. Our benefit offerings cover the must-haves (healthcare and retirement), the just-in-cases (insurances and employee assistance programs), and the cherry-on-tops (fitness reimbursements, year-end incentive pay, and tuition assistance). Visit our website for more details on benefits listed below. • Flexible Work Schedule, • Health/Dental Insurance, • 401k Plan with Employer Match, • Short & Long Term Disability, • Profit Sharing, • Paid Time Off, • Leadership Development Program, • Fitness Reimbursement, • Tuition Reimbursement, • Referral Bonus Program, • Wellness Program, • Team Building Events, • Community Service Events

Job Description BUILDING SYSTEMS ENGINEERING (BSE) TECHNICIAN I Why This Role Matters: As a Building Systems Engineer Technician, you will assist in the production of structural, HVAC, plumbing and/or electrical system plans for a wide range of building design projects. You will use computer-aided software to develop models and designs for building projects across our diverse practice areas and work closely with team leadership to bring projects to gainful, timely completion, collaborating with architects, engineers, and interior designers alike. What You'll Do: • Participate in product research, evaluation and selection of appropriate resources and tools, • Interface with Technology Services team to coordinate data collection and management, • Make site visits alongside senior team members to document existing systems and gather and consolidate owner documentation, • Check in frequently with architects, designers and engineers regarding assigned projects, • Collaborate with the design team to craft sketches, layouts and plans What You Bring to the Table Must Have: • High school diploma, • BIM modeling and drafting skills, • Construction administration duties experience, • Proficiency in Revit, AutoCAD and/or other similar programs, • Interpersonal skills, able to communicate effectively both verbally and via written correspondence, • Technical problem-solving skills Nice to Have: • AS degree in a technical field of study, • Familiarity with most governing codes and standards as well as engineering formulas and methodologies What You'll Be Part Of: As the Building Systems Engineer Technician, you will be part of a team that provides mindful structural design for clients in healthcare, K-12 education, higher education, communities, municipalities, industrial sectors and more. What We Offer: CPL cares about your future with us! That’s why we offer the following benefits to you and your family: • Internal Mobility & Career Advancement, • Healthcare for you and your family including spouse coverage: Medical, Dental, Vision & Prescription insurances. Single Plans with 100% paid premium, • Flexible Time Off + 8 Holidays a year, • Retirement Savings Plan - Contribution from CPL to grow your retirement funds., • Tuition Assistance: You may be eligible for continuing education assistance., • Student Loan Assistance Program: CPL will contribute up to a maximum of $100 a month for 5 years ($6,000 total) towards student loan debt., • Licensure Assistance, • Long-Term Disability Insurance Company/team member premium sharing, • Flexible Spending Account $5,000 dependent childcare annually paid 100% by team member pre-taxes., • FREE Life Insurance and AD+D Insurance, • Voluntary Short-Term Disability Insurance What Does it Look Like Working Here? We believe that building a strong community is about establishing a prevailing sense of fellowship among our team members, friends, and neighbors. • Collaboration – working with others towards the best solution, placing great emphasis on the collective wisdom of our internal teams., • Family – celebrating others’ successes, genuinely caring about the happiness and well-being of our team members and recognizing their own families as extensions of the CPL family., • Fun – not taking oneself too seriously, fully understanding that fun at work is conducive to productivity., • Inspiration – contributing to an uplifting workplace that facilitates growth and success by maintaining a positive, upbeat attitude., • Integrity – doing what is ethically right and providing reliable follow-through on commitments. CPL does not accept unsolicited resumes from recruiting professionals or agencies, nor do we accept resumes from any source that does not reference a specific, open position. CPL will not be responsible for any fees arising from the use of resumes submitted by recruiting professionals or agencies that do not have a current placement fee agreement with CPL. All initial communication with recruiting professionals or agencies must go through our Talent Acquisition Team.

Job Description We are currently hiring a Structural Engineer to join our Building Engineering Division in our Buffalo, NY office. The Building Engineering Division at LaBella provides complete building engineering services including mechanical, electrical, plumbing, and structural engineering. Services range from feasibility studies and analysis through project design and construction. Our engineers are well versed in new construction, renovations, additions, analysis, special structures, and design/build projects for a variety of clients. The Structural Discipline provides structural engineering services with emphasis on new design, repair, and rehabilitation of constructed works, as well as investigation and performance evaluation. This position will work closely under the supervision of a Senior Structural Engineer to develop concepts, strategies, designs, drawings, specifications and reports. Individual must be able to work independently, as well as part of multi-discipline teams Candidates will work on an interesting variety of project types including K-12 and higher education, municipal, health care, large commercial, residential and other unique projects. This role can accelerate your career goals through immediate opportunities to lead, and comes with a competitive starting salary, incentive compensation, a comprehensive benefit package, and opportunities to become a LaBella shareholder. Duties • Perform complex design calculations for analysis and design of new and existing structural systems., • Prepare documents and reports from concept design through advanced technical design documentation., • Perform field investigations and document findings., • Work closely with other engineering and architectural disciplines., • Review shop drawings, respond to RFI’s and perform field observations during CA phase. Salary Range: $65,000 - $100,000 per year The specific salary offered may be influenced by a variety of factors including but not limited to the candidate's relevant experience, education, and work location. Requirements • Bachelor of Science degree in Civil or Structural Engineering is required. Coursework in building systems engineering required., • Master of Science degree in Structural Engineering is preferred., • 3 years minimum experience with concrete, steel, masonry, and/or wood design is required., • Working knowledge of AutoCAD, Revit and structural engineering design software (RISA, SAP, and/or TSD) is required., • E.I.T. accreditation preferred., • Excellent verbal and written communication skills. Body, mind, and wallet—LaBella’s benefits support a holistic approach to your health and wellness, creating the foundation for physical, mental, and financial well-being. Our benefit offerings cover the must-haves (healthcare and retirement), the just-in-cases (insurances and employee assistance programs), and the cherry-on-tops (fitness reimbursements, year-end incentive pay, and tuition assistance). Visit our website for more details on benefits listed below. • Flexible Work Schedule, • Health/Dental Insurance, • 401k Plan with Employer Match, • Short & Long Term Disability, • Profit Sharing, • Paid Time Off, • Leadership Development Program, • Fitness Reimbursement, • Tuition Reimbursement, • Referral Bonus Program, • Wellness Program, • Team Building Events, • Community Service Events

Job Description Are you passionate about healthcare building engineering systems? We are seeking a Senior Electrical Engineer with a strong background in healthcare building projects to join our Buffalo, NY Office. In this role, you will collaborate with regional leaders and engineering teams to develop concepts, strategies, designs, drawings, specifications, and reports from project inception through construction. You must be able to work independently and as part of multi-discipline teams to drive successful client outcomes in the built environment. This is a unique opportunity to lead and build a team, playing a key role in shaping the future of our healthcare engineering sector. At LaBella, our architects and engineers are problem-solvers, innovators, and change-makers, committed to addressing local and regional challenges, preserving natural resources, and planning for a sustainable future. Duties may include: Project Development & Client Engagement • Scope projects and develop proposals., • Build and maintain relationships with existing and prospective clients., • Function as the lead electrical engineer on multi-discipline projects from proposal through construction., • Serve as a project manager for building engineering-led projects. Electrical Engineering & Design • Develop electrical designs including single-line diagrams, electrical room layouts, panel sizing, lighting, and building systems., • Perform load calculations for generators, transformers, switchgear, MCCs, panel boards, VFDs, feeders, and branch circuits., • Prepare electrical design drawings, specifications, and reports., • Research and present coordinated design solutions., • Conduct building condition assessments and generate reports., • Ensure compliance with national, state, and local regulations, including FGI guidelines, DOH requirements, and CON submissions. Team Collaboration & Leadership • Work closely with mechanical, civil, structural engineers, and architects., • Mentor and train junior engineers., • Delegate and oversee project tasks to ensure successful completion., • Engage with owners, contractors, permitting authorities, and industry organizations. Technical Expertise & Innovation • Serve as Engineer-of-Record and internal technical expert on assigned projects., • Maintain up-to-date knowledge of industry technologies, trends, and best practices., • Passion for healthcare building systems and recognized expertise in the field., • Bachelor’s or Associate’s degree in Electrical Engineering, Engineering Technology, or a related field., • PE license (NY or OH) strongly preferred., • Minimum 10 years of experience in an A/E consulting firm., • Expertise in power distribution, lighting, fire alarm, security systems, and telecommunications design., • Experience with AutoCAD and Revit is a plus., • Familiarity with electrical modeling programs (e.g., AGi32 for lighting, SKM for power analysis)., • Understanding of Arc-Flash Evaluation and electrical safety codes., • Strong writing, organizational, and communication skills., • Attention to detail—because in this role, every detail matters!, • Ability to manage multiple projects simultaneously. Salary Range: $125,000 - $175,000 The specific salary offered may be influenced by a variety of factors including but not limited to the candidate's relevant experience, education, and work location. Why Join Us? • Opportunity to lead and grow a team in a respected firm., • Collaborative, mission-driven culture focused on innovation and sustainability., • Work on impactful projects that shape healthcare environments. Body, mind, and wallet—LaBella’s benefits support a holistic approach to your health and wellness, creating the foundation for physical, mental, and financial well-being. Our benefit offerings cover the must-haves (healthcare and retirement), the just-in-cases (insurances and employee assistance programs), and the cherry-on-tops (fitness reimbursements, year-end incentive pay, and tuition assistance). Visit our website for more details on benefits listed below. • Flexible Work Schedule, • Health/Dental Insurance, • 401k Plan with Employer Match, • Short & Long Term Disability, • Profit Sharing, • Paid Time Off, • Leadership Development Program, • Fitness Reimbursement, • Tuition Reimbursement, • Referral Bonus Program, • Wellness Program, • Team Building Events LaBella is committed to facilitating a culture where diversity, equity, and inclusion are respected, valued, and celebrated by implementing thoughtful, practical, and innovative strategies that support our employees and serve the communities in which we reside. All applicants will be considered for employment without regard to race, color, religion, age, national origin, ancestry, ethnicity, gender (including pregnancy, childbirth, breastfeeding or other related medical conditions), gender identity, gender expression, sexual orientation, marital status, veteran status, disability, genetic information, citizenship status, characteristic or membership in any other group protected by federal, state or local laws. LaBella Associates does not accept unsolicited resumes from recruiting professionals or agencies, nor do we accept resumes from any source that does not reference a specific, open position. LaBella Associates will not be responsible for any fees arising from the use of resume submitted by recruiting professionals or agencies that do not have a current placement fee agreement with LaBella Associates. All initial communication with recruiting professionals or agencies must go through human resources.

Job Description Hazen and Sawyer is seeking a Construction Inspector to support the construction of water and wastewater treatment facilities and infrastructure located in the greater NYC Metro area and Springfield, MA. The selected candidate will inform the CM team by observing and reporting on construction activities, effectively coordinating and collaborating with the project team members, and providing documentation and inspection activities for various water and wastewater facilities and infrastructure. Responsibilities include: • Review and interpret project drawings, specifications and work plans to verify contractor compliance;, • Conduct on-site observation, monitoring, inspection, and evaluation of construction activities;, • Verify and track work in accordance with approved shop drawing submittals;, • Observe contractor performance and compliance with safety requirements;, • Prepare daily reports, verify material quantities, Time and Material (T&M) records and review contractor pay applications;, • Monitor construction contractor’s adherence to project schedule and sequence of activities related to daily field observations;, • Maintain project redline and as-built drawings;, • Coordinate and communicate effectively with the CM Project team, multi-discipline engineering teams, contractors and third-party inspection/testing firms;, • Assist and coordinate with project start-up, testing checkout and training activities;, • Minimum 5 years of construction / construction observation experience;, • Familiarity with construction methods typical of civil, structural, mechanical and/or electrical engineering work;, • Excellent verbal, written, and interpersonal skills, organizational and problem-solving skills;, • Experience working on and collaborating with multidisciplinary teams, • Willing to travel and stay local to projects in the NYC Metro area as needed., • Proficiency with Microsoft Office Suite, Microsoft Project and related PC software packages used on construction projects, • Experience in municipal water and wastewater or similar industry construction inspection preferred

Job DescriptionMECHANICS: SCORE THE HIGHEST-PAYING AUTO JOBS WITH CARGUYS INC! Where: Top Dealerships & Shops Nationwide Type: Full-Time, Industry-Leading Pay + Fat Bonuses Who: Rookie Techs to Master Mechanics – We Want YOU! Tired of lowball offers and dead-end gigs? CarGuys Inc. is the #1 recruiter hooking up Auto Mechanics (Technicians) with elite dealerships and repair shops that pay the HIGHEST WAGES IN THE INDUSTRY. We’re talking life-changing paychecks, cutting-edge shops, and jobs that make you stoked to grab your toolbox every day. Ready to level up? Let’s roll! Why CarGuys Inc. DELIVERS for Mechanics: TOP PAY, GUARANTEED: We ONLY partner with shops and dealers shelling out the highest wages, plus signing bonuses and performance cash to pad your pocket. ELITE SHOPS, YOUR STYLE: Work in high-tech bays with the latest tools, lifts, and diagnostics – from local hotshots to big-name chains. Imports, exotics, EVs, you name it! CAREER BOOST: Land gigs with paid training (EV, ADAS, ASE certs) and fast tracks to Lead Tech or Shop Foreman. We match your hustle to your dream role. YOUR JOB, YOUR TERMS: Our recruiters hand-pick shops that fit YOUR vibe – killer culture, short commutes, and respect for your skills. 100% FREE FOR YOU: Our service costs you NOTHING. Dealers pay us to find pros like you, so you just cash in on the best jobs. What You’ll Do: * Fix everything from oil changes to engine overhauls with pro-level precision. * Master cutting-edge diagnostics to solve problems like a boss. * Join teams that live for cars and crush it in high-energy shops. Who We Want: * Car Junkies: You eat, sleep, and breathe automotive. * Any Skill Level: From newbies with drive to ASE-certified legends. * Toolbox Warriors: Got your tools? Bring the heat. * Clean License: Valid driver’s license, clean record a plus. Mechanics RAVE About Us: “CarGuys Inc. got me a dealership gig with insane pay and EV training in DAYS. Best move I ever made!” – Tony, Master Tech “I was underpaid and overworked. CarGuys landed me a shop with a fat bonus and a crew that’s like family!” – Kayla, Auto Tech DON’T SLEEP ON THIS – YOUR BIG BREAK IS NOW! Why settle for less? Join the mechanics cashing in with CarGuys Inc. and lock in a job that pays you what you’re WORTH. Apply NOW! Skills:State Engine Repair Certification, State Engine Tune-up/Performance Certification, State Front End, Suspension & Steering Systems Certification, State Brakes & Braking Systems Certification, State Automatic Transmission Certification, State Manual Transmission, Front & Rear Drive Axles Certification, State Electrical Systems Certification, State Heating & Air Conditioning Certification, State Pre-1973 Vehicles Certification: over 10,000 pounds GVW, State Engine Repair - Gasoline Certification, State Engine Repair - Diesel Certification, State DriveTrain Certification, State Brakes & Braking Systems Certification, State Suspension & Steering Systems Certification, State Electrical Systems Repair Certification categories for other on-road vehicles are: State Collision-Related Mechanical Repair Certification, State Unitized Body Structural Repair Certification, State Motorcycle Repair Certification, State Recreational Trailer repair Certification: ASE Engine repair certification, Automatic transmission/transaxle certification, ASE Manual DriveTrain & Axles, ASE Suspension & Steering, ASE Brakes, ASE Electrical/Electronic Systems, ASE Heating and Air Conditioning, ASE Engine performance. Automotive mechanic, automotive technician, automotive service tech, automotive service technician, auto tech, auto mechanic, factory trained technicians, warranty repairs, certified pre-owned inspections, recall repairs, customer satisfaction surveys, CSI, express service, express technician. Express service lane You are applying through Car Guy’s Inc, America’s and Canada’s #1 Automotive Recruiter. Companies all over America and Canada hire us to find them qualified candidates. If deemed a qualified candidate your resume will be forwarded to a local dealer.

Job Description MAINTENANCE TECHNICIAN Come join our AMAZING team!! CRM Rental Management, Inc. is currently seeking a Maintenance Technician at our Mariner Towers Apartments in Buffalo, NY! Please visit: to learn more about CRM. Our company continues to grow and expand providing us with the opening for new talent! Why join our Amazing Team?! CRM Benefits: • 11 paid holidays (includes 1 floating holiday and the day after Thanksgiving!), • Excellent insurance options/benefits that are up to 75% employer paid!, • 100% up to 5% 401k match, • Competitive Salary, • Annual reviews with performance-based bonuses, • EAP including Discount programs The Maintenance Technician’s primary duty is to ensure a safe, secure, and comfortable living environment for residents, visitors, and team members by maintaining the physical integrity of the property. • Carry out assigned duties as requested by the Superintendent in a safe manner according to company policies and procedures, state, and federal laws; e.g., OSHA, ADA, Fair Housing, etc., • Obtain a thorough knowledge of power, water, and gas turnoffs, clean-out traps, fire extinguishers, and fire hydrants on property., • Assists in all aspects of the property's maintenance, including building and grounds interior and exterior, custodial, preventative, corrective, deferred, and emergency maintenance., • Repairs structural wear and damage to buildings., • Grounds keeping and landscaping., • Clean parking areas, sidewalks, alleyways, hallways, and common areas., • Prepares vacant apartments including painting., • 1-2 years of full-time maintenance experience., • Working knowledge of electricity, plumbing, carpentry, HVAC, painting, and various appliances., • Willingness to perform tasks required and to learn and grow. Monday - Friday, 8:00am - 4:30pm (On-Call Availability) 40 hours per week.

Job Description Overview Ansible Government Solutions, LLC (Ansible) is currently recruiting Emergency Medicine Physicians to support the VA Western New York Healthcare System at Buffalo located at 3495 Bailey Avenue, Buffalo, NY 14215. Services are to be provided in accordance with medical licensing and Emergency Medicine scope of practice. Full-time and Locum Tenens positions with generous compensation packages are available. Ansible Government Solutions, LLC (Ansible) is a Service-Disabled Veteran-Owned Small Business (SDVOSB) providing Federal customers with solutions in many arenas. Our customers face wide-ranging challenges in the fields of national security, health care, and information technology. To address these challenges, we employ intelligent and committed staff who take care of our customers’ success as if it is their own. Responsibilities • Initial evaluation, emergent treatment, and management of minor wound care, respiratory illness, gastrointestinal illness, burns, musculoskeletal trauma, dermatological illness, ENT, eye, and urological problems., • Initial evaluation, emergent treatment, and management of minor procedures such as local infiltration anesthesia, incision and drainage, simple laceration repair, nail trephination, electro-coagulation, nasal cautery, gastric lavage, bladder catheterization, peripheral venous line insertion, and spinal immobilization., • Initial evaluation, emergent treatment, and management of abdominal and gastrointestinal disorders (including trauma) of the esophagus, stomach, small bowel and colon rectum and anus, liver and biliary tree and pancreas., • Initial evaluation, emergent treatment, and management of cardiovascular disorders (including trauma) involving cardiac failure, differential diagnosis of chest pain, cardiac structural disorders, cardiac rhythm and conduction defects, pericardial disorders, disease of peripheral arteries and veins, shock, and cutaneous disorders., • Initial evaluation, emergent treatment and management of emergent disorders caused by antigens, organisms, and other foreign substances such as reactions of hypersensitivity; reactions from venoms, bites, and stings; reactions caused by infectious agents; disorders due to chemical, drug and physical agents; and disorders associated with the environment to include barotraumas, near drowning, electrical injury, hypothermia and radiation injury., • Initial evaluation, emergent treatment, and management of emergent disorders of the hematopoietic system such as anemia, coagulopathy and management of acute neoplastic disease complication., • Initial evaluation, emergent treatment, and management of emergent disorders of endocrine, metabolic and nutritional natures relating to acid-base disturbances, adrenal, parathyroid and thyroid disturbances., • Initial evaluation, emergent treatment, and management of emergent disorders of the head and neck (including trauma) involving the ears, nose, oral cavity, larynx/trachea, face and vestibular system., • Initial evaluation, emergent treatment, and management of emergent disorders (including trauma) of the eye involving the lids and lachrymal apparatus conjunctiva, cornea, sclera, internal aspects of the globe and orbit., • Initial evaluation, emergent treatment, and management of emergent disorders (including trauma) of the musculoskeletal system involving shoulder girdle, upper extremity and hand, lower extremity and foot, thorax and vertebrae and arthropathies., • Initial evaluation, emergent treatment, and management of emergent disorders (including trauma) of the nervous system including cerebral edema, coma, cranial nerve disease, cerebro-vascular disease and infection., • Initial evaluation, emergent treatment, and management of emergent disorders of psychiatric origin including depression, anxiety reactions, suicide and psychosis., • Initial evaluation, emergent treatment and management of emergent respiratory disorders including pulmonary, infection, trauma, neoplasia, metabolic and complications of cardiovascular disease., • Suture minor lacerations., • Major procedures: shall be performed in the VAMC emergency department when safe and appropriate to do so for procedures such as central venous line placement, arterial catheter placement, emergency chest tube or needle thoracostomy to relieve tension pneumothorax, peritoneal lavage, defibrillation and synchronized cardioversion, endotracheal intubation, lumbar puncture, proctoscopy/anoscopy, pericardiocentesis, simple closed fracture and dislocation reduction, arthrocentesis, local and up to moderate systemic anesthesia (intravenous/regional), pericardiocentesis, temporary pacemaker placement, chest tube thoracostomy and cricothyroidotomy., • Stabilization and transfer: Patients suffering traumatic injuries where immediate treatment and release is not medically indicated and when clinical level of care is not available at the VAMC, the contractor’s physician (s) shall provide initial stabilization and readying of such patients for transport to an appropriate facility for care., • Active Physician license from any U.S. State, Commonwealth, Territory, or the District of Columbia, • ABEM or AOBEM Board Certified or Board Eligible, • Minimum of two (2) years recent experience working in an Emergency Department (ED) setting., • American Heart Association BLS, • Sit, stand, walk, lift, squat, bend, twist, and reach above shoulders during the work shift, • Lift up to 50 lbs from floor to waist, • Lift up to 20 lbs, • Carry up to 40 lbs a reasonable distance Powered by JazzHR E6zoPrajxP

Job DescriptionA leading transportation and logistics company in Buffalo, NY, is seeking an experienced Trailer Mechanic to join their maintenance team. This role is ideal for a technician with strong diagnostic skills and hands-on experience repairing and maintaining dry vans, reefers, and flatbed trailers. Responsibilities: * Perform inspections, diagnostics, and repairs on trailers and related components * Repair and replace brakes, suspensions, axles, landing gear, air systems, electrical wiring, and lighting * Conduct preventative maintenance in accordance with DOT and company standards * Troubleshoot ABS systems, air lines, and structural damage * Complete work orders accurately and maintain detailed service documentation * Ensure safety compliance and maintain a clean, organized work environment Qualifications: • Proven experience as a Trailer Mechanic in the transportation or construction industry., • Experience with diagnostic tools and equipment., • 2+ years of experience working as a trailer mechanic. Strong understanding of air brake systems, electrical systems, and trailer components. * Ability to diagnose issues independently and work efficiently. * Welding or fabrication experience is an asset. • Ability to interpret technical manuals and schematics., • Strong problem-solving skills and attention to detail., • Excellent communication skills., • Valid driver's license and clean driving record. Compensation & Benefits: • Competitive wages based on experience: $28 - $32/hr., • Comprehensive benefits package, including Health, Life insurance, 401k matching, Profit Sharing, PTO, and Paid Holidays. Shift: Days, shift 8:00 AM - 4:00 PM (Monday - Friday). OT available How to Apply: If you're a skilled Trailer Mechanic seeking a challenging and rewarding opportunity, we want to hear from you! To apply, please submit your resume and cover letter outlining your relevant experience and qualifications to or visit .

Job Description Quality Control Technician (2nd Shift – 3:30 - Midnight) Also known as: Quality Inspector, QC Inspector, QA Technician, Quality Assurance Technician, Manufacturing Quality Technician, Welding Inspector, Metal Fabrication Inspector, Structural Steel Inspector, Production Quality Technician Location: Buffalo, NY Schedule: Monday–Friday, 3:30 PM–12:00 AM GTI Fabrication manufactures custom modular structures, energy storage enclosures, and container-based systems for military, defense, energy, and commercial industries. We specialize in metal fabrication, welding, assembly, structural steel, and modular construction at our Buffalo, NY facility. We are hiring a 2nd Shift Quality Control Technician (Quality Inspector / QC Inspector) to perform inspections on welded, fabricated, and assembled components throughout the manufacturing process. Responsibilities • Perform incoming, in-process, and final inspections on fabricated metal parts, welds, and assemblies, • Conduct visual weld inspections and dimensional inspections, • Read and interpret blueprints, weld symbols, fabrication drawings, and mechanical prints, • Maintain accurate QC reports, inspection logs, and test data, • Calibrate and maintain measurement tools and QC equipment, • Identify nonconformities (NCRs) and communicate issues to supervisors, • Support continuous improvement for quality assurance and welding quality, • Work closely with fabrication, welding, assembly, and engineering teams Qualifications • 2–5 years of experience as a Quality Control Technician, Quality Inspector, QC Inspector, Welding Inspector, or Manufacturing Quality Technician, • Experience with weld inspection and metal fabrication inspection, • Proficiency using calipers, gauges, tape measures, squares, and weld inspection tools, • Ability to read and interpret mechanical drawings, fabrication prints, and electrical diagrams, • Strong math skills (fractions, decimals, tolerances), • Ability to lift 50 lbs and work in a shop-floor production environment, • High school diploma or GED Preferred: • AWS CWI certification or working toward certification Job Type: Full-time Pay: $20.00 - $28.00 per hour Benefits: • 401(k), • Dental insurance, • Flexible spending account, • Health insurance, • Health savings account, • Life insurance, • Paid time off, • Professional development assistance

Job Description Quality Control Technician (1st Shift – 7:00 AM to 4:00 PM) Also known as: Quality Inspector, QC Inspector, QA Technician, Quality Assurance Technician, Manufacturing Quality Technician, Welding Inspector, Metal Fabrication Inspector, Structural Steel Inspector, Production Quality Technician Location: Buffalo, NY Schedule: Monday–Friday, 7:00 AM – 4:00 PM GTI Fabrication manufactures custom modular structures, energy storage enclosures, and container-based systems for military, defense, energy, and commercial industries. We specialize in metal fabrication, welding, assembly, structural steel, and modular construction at our Buffalo, NY facility. We are hiring a 1st Shift Quality Control Technician (Quality Inspector / QC Inspector) to perform inspections on welded, fabricated, and assembled components throughout the manufacturing process. Responsibilities • Perform incoming, in-process, and final inspections on fabricated metal parts, welds, and modular assemblies, • Conduct visual weld inspections and dimensional checks, • Read and interpret blueprints, weld symbols, fabrication drawings, and mechanical prints, • Maintain accurate QC inspection reports, logs, test data, and documentation, • Calibrate and maintain measurement tools and weld inspection equipment, • Identify nonconformities (NCRs) and communicate findings to supervisors and engineering, • Support continuous improvement activities for quality assurance and welding quality, • 2–5 years of experience as a Quality Control Technician, Quality Inspector, QC Inspector, Welding Inspector, or Manufacturing Quality Technician, • Experience with weld inspection, metal fabrication inspection, and structural steel products, • Proficiency using calipers, gauges, tape measures, squares, weld inspection tools, and measurement devices, • Ability to read and interpret mechanical drawings, fabrication prints, electrical diagrams, and weld symbols, • Strong math skills (fractions, decimals, tolerances), • Ability to lift 50 lbs and work on the production floor, • AWS CWI certification (or actively pursuing) Job Type: Full-time Pay: $20.00 - $28.00 per hour Benefits: • 401(k), • Dental insurance, • Flexible spending account, • Health insurance, • Health savings account, • Life insurance, • Paid time off

Job Description Job Title: Mechanical/Electrical Assembler – Modular Manufacturing Location: Buffalo, NY (On-Site) Department: GTI Energy – Manufacturing Employment Type: Full-Time | Non-Exempt About GTI Fabrication GTI Fabrication is a leader in industrial manufacturing, modular construction, and metal fabrication, specializing in the design and assembly of modular structures, energy storage enclosures, and shipping container-based systems. We support industries including defense, military, energy storage, disaster relief, and commercial construction. Our team includes welders, electricians, assemblers, HVAC technicians, fabricators, and engineering professionals working together to build high-quality, mission-critical modular solutions. This Mechanical/Electrical Assembler role is based at our GTI Energy manufacturing facility in Buffalo, NY. Position Overview As a Mechanical/Electrical Assembler, you will support the assembly, installation, and integration of mechanical, electrical, and HVAC components into energy storage enclosures and modular industrial structures. This role is ideal for individuals with experience in mechanical assembly, electrical assembly, HVAC installation, construction labor, or general industrial assembly. Key Responsibilities 1. Component & System Assembly • The Mechanical/Electrical Assembler will assemble, install, and integrate mechanical, electrical, and structural components into energy storage enclosures and modular units., • Follow assembly drawings, blueprints, schematics, and written work instructions. 2. Mechanical Assembly • Perform hands-on tasks: cutting, drilling, mounting, bolting, fastening, and structural integration., • Install mechanical components, hardware, ducting, frames, and industrial parts. 3. Electrical Assembly & Wiring • A Mechanical/Electrical Assembler will assist with running conduit, pulling wire, cable routing, and installing electrical components., • Use multimeters, meters, and diagnostic tools to test and troubleshoot circuits., • Perform basic electrical installation, maintenance, and repairs (as qualified). 4. HVAC Installation • Install HVAC units, ducting, vents, and climate control systems for modular enclosures. 5. Blueprint Interpretation • Read and follow simple blueprints, diagrams, and assembly drawings to ensure accurate integration. 6. Power Tools & Equipment • Operate drills, saws, grinders, impacts, and other power tools safely., • Experience as a Mechanical/Electrical Assembler, construction laborer, mechanical assembler, electrical assembler, HVAC installer, or industrial assembler., • Proficiency with power tools, tape measures, hand tools, and diagnostic equipment., • Ability to read and interpret basic blueprints and diagrams., • Experience with electrical tasks (conduit, wiring, testing) or HVAC installation (preferred)., • Ability to lift 50 lbs+, stand for long periods, and work in an industrial manufacturing environment., • Modular construction, containerized structures, or energy storage system assembly., • Mechanical, electrical, HVAC, or fabrication background., • Fast-growing industrial manufacturing environment., • Hands-on exposure to modular construction, energy storage systems, and electrical integration. Job Type: Full-time Benefits: • 401(k), • Dental insurance, • Employee assistance program, • Health insurance, • Health savings account, • Life insurance, • Paid sick time, • Paid time off, • Vision insurance Work Location: In person Company DescriptionGTI specializes in the design, engineering, fabrication, and deployment of custom modular structures, shipping container-based structures, and ballistic metal fabrication. We serve multiple industries, including DOD contractors, military, disaster relief, and commercial markets. Our containerized and modular solutions are all built in-house at our factory in Buffalo, NY. Manufacturing capabilities range from military training, live fire enclosures, bathroom/shower units, expeditionary camps, medical facilities, water treatment, electrical/energy storage enclosures, and much more.GTI specializes in the design, engineering, fabrication, and deployment of custom modular structures, shipping container-based structures, and ballistic metal fabrication. We serve multiple industries, including DOD contractors, military, disaster relief, and commercial markets. Our containerized and modular solutions are all built in-house at our factory in Buffalo, NY. Manufacturing capabilities range from military training, live fire enclosures, bathroom/shower units, expeditionary camps, medical facilities, water treatment, electrical/energy storage enclosures, and much more.

Job Description Pay: $24.37 - $34.35 per hour Job description: Position Summary: Stellar Roofing is seeking a dedicated and skilled Roof Shingle Installer to join our team. This role involves the proper installation of roofing shingles on residential structures, ensuring waterproofing, durability, and aesthetic appeal. The ideal candidate will have experience working safely at heights, following construction plans, and adhering to industry best practices, while working efficiently to deliver high-quality results. If you're familiar with shingling techniques, comfortable using air tools, and committed to safety and craftsmanship, we want to hear from you! Key Responsibilities: Qualifications: • Proven experience in shingle roofing installation on both residential buildings., • Familiarity with roofing materials, including asphalt shingles, underlayment, flashing, and waterproofing membranes., • Comfortable working at heights, lifting heavy materials (80 lbs or more), and using air-powered tools such as nailers., • Ability to read and follow construction plans and specifications., • Strong attention to detail, safety awareness, and craftsmanship., • Competitive pay with weekly team productivity bonuses., • Opportunities to learn and grow your roofing skills., • Supportive, safety-focused team environment., • Competitive salary, • Weekly bonuses for team productivity, • Health, dental, and vision insurance options, • 401(k) with matching contributions, • Paid time off Benefits: • 401(k), • 401(k) matching, • Dental insurance, • Employee discount, • Health insurance, • On-the-job training, • Opportunities for advancement, • Paid time off, • Referral program, • Retirement plan, • Vision insurance Work Location: In person Company DescriptionStellar Roofing is a leading provider of residential and commercial roofing solutions, known for our commitment to quality, safety, and customer satisfaction. We pride ourselves on delivering exceptional roofing services to a diverse range of clients. We are seeking a skilled and experienced Roofer to join our dynamic team.Stellar Roofing is a leading provider of residential and commercial roofing solutions, known for our commitment to quality, safety, and customer satisfaction. We pride ourselves on delivering exceptional roofing services to a diverse range of clients. We are seeking a skilled and experienced Roofer to join our dynamic team.