Supplier quality engineer jobs in San Jose, CaliforniaCreate job alerts

Job Description Job Title: Roadway Worker In Charge (RWIC) Location: San Jose, CA Job Type: Full-Time and Part-time FLSA Status: Hourly; Non-Exempt Reports To: District Manager Travel: Yes, travel is expected for this position (50% - 85% on average). Supervisory Responsibility: No Compensation: Negotiable, based on skills and experience. Company Profile: National Railroad Safety Services, Inc. (NRSS) is a certified DBE/WBE firm primarily focused on providing safety services to the railroad industry. NRSS is the most trusted name in the railroad industry for providing qualified field safety staff and safety training. To best serve the railroad industry, NRSS provides all of these services in the continental United States, Canada, and Mexico. NRSS has the proven ability and the proven safety record to handle any project. Find the safety you have been missing today! Job Description: National Railroad Safety Services, Inc. (NRSS) is seeking a Roadway Worker In Charge (RWIC) to support railroad flagging services for Class 1 Railroads, Regional Short Lines, Transit Systems, State DOT's, as well as Railroad Suppliers, Contractors, and Consultants alike. Required Education: High School Diploma or Equivalent. Required Experience: Minimum 2 years of experience with a Class 1 Railroad, Regional Short Line, Transit System, State DOT Rail Division, Railroad Supplier, Railroad Contractor, and/or Railroad Consultant; preferably within the Maintenance Of Way (MOW) Department. Key Success Factors: • Accountability: Accept full responsibility for self and contribution as a team member., • Adaptability & Flexibility: Ability to consider a variety of issues that exist in the work place and change from one task to another as necessary., • Analytical Thinking: Ability to analyze and synthesize information to understand issues, identify options, and support sound decision making., • Attention to Detail: Ability to work in a conscientious, consistent, thorough manner, and attend to details while pursuing quality when accomplishing tasks., • Communication: Ability to clearly convey information and ideas through a variety of media to employees/clients in a clear and succinct manner., • Customer Service Focus: Ability to provide service excellence to internal and/or external clients., • Decision Making: Ability to identify/understand issues, problems, opportunities and take appropriate action based on available facts, constraints, and probable consequences., • Initiative: Ability to identify what needs to be done and take action before being asked., • Innovativeness: Ability to devise new plans for quality excellence., • Knowledge: Ability to navigate various rulebooks and/or regulations and demonstrate mastery., • Organization: Ability to maintain materials and/or records in a clean and ordered manner., • Planning: Ability to plan and prioritize work load to manage time effectively and accomplish assigned tasks., • Stress Tolerance: Ability to maintain stable performance under pressure or opposition (such as time pressure or job ambiguity)., • Teamwork: Promote cooperation and commitment within a team environment to achieve goals and deliverables., • Proficient computer skills in basic email, phone, and text message applications., • Proficient computer skills in Android OS; on tablet & smart phone., • Proficient computer skills in Citrix Applications., • Strong oral and written communication skills., • Strong technical knowledge in Railroad Engineering, Railroad Design, Railroad Construction, and Safety., • High level of accuracy and attention to detail; well organized., • Demonstrated ability to develop and maintain strong client relationships., • Ability to travel for extended periods of time; sometimes month(s) at a time., • Provide jobsite coordination., • Provide clear and concise communication with Dispatchers, Train Crews, other Railroad Personnel, and/or Contractor personnel., • Provide clear, concise, and thorough job briefings with all personnel on each job site., • Enforce all Railroad, State, and Federal Policies., • Identify rule violations and resolve in accordance with Railroad, State, and Federal Policies., • Enforce Contractor training requirements., • Submit daily field reports detailing Contractor and/or Railroad activities. Physical Demands: The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. • Must be able to hear, speak, read, and write clearly in English., • Must be able to drive long distances and/or travel by other modes as necessary., • Must be able to stand for long periods of time and/or walk on level/uneven ground., • Must be able to see up close, distances, colors and have use of peripheral vision and depth perception., • Must be able to tolerate extreme heat/cold temperatures., • Must be able to tolerate dusty/noisy conditions., • Medical, Dental, Vision, Life Insurance, • Short Term, Long Term Disability Insurance, • Paid Vacation and Holidays Safety Commitment: All employees of all levels are to remain committed to safety at all times while employed at National Railroad Safety Services, Inc. (NRSS). As such, no job is so important and no service is so urgent that we may not take time to perform all work safely. Simply put, safety is our way of life. By placing safety first, we not only ensure the wellbeing of our employees, customers, and communities, but we hold true our commitment to being the leader in safety throughout the Railroad Industry. Closing Statement: National Railroad Safety Services, Inc. (NRSS) is an Equal Opportunity/Affirmative Action Employer. Any candidate selected for this position must be able to successfully pass pre-employment/recurrent background checks, drug/alcohol testing, and classroom training. Job Posted by ApplicantPro

Job Description Primary Function of the Position: Responsible for ensuring suppliers meet company requirements for quality, service, delivery, and cost. Drive suppliers to continuously improve business and manufacturing processes. Evaluate and select suppliers. Guide Engineering in choosing suppliers for new products and provide DFM input to new designs. Supports both NPI and on-going production, monitors and works with suppliers to improve supplier performance. Executes detailed projects with suppliers to implement changes and improvements affecting quality, cost, capacity, risk, and sub-supplier management. This role will focus on manufacturing of electronics including printed circuit boards (PCBs), printed circuit board assemblies (PCBAs), electronic components, sub-assemblies, and fully finished electronic systems for some of company’s newest products. The ideal candidate has experience bringing electronic devices to market, preferably medical devices; has worked directly with electronics manufacturing service (EMS) suppliers and component suppliers; and has demonstrated knowledge in a variety of electronics manufacturing technologies such as surface mount technology (SMT), automatic optical inspection (AOI), in-circuit test (ICT), functional testing (FUT), cable assemblies, etc.; as well as electronic system and PCBA design experience. Essential Job Duties: • Complete project/ part qualification deliverables including Supplier pFMEA, Process Validations (IQ/OQ/PQ), Inspection Reports, Gage R&R, and Process Capability Analysis, • Work with suppliers to execute cost reductions, capacity improvements, and risk mitigation., • Select the right process and supplier for the part, considering long-term fit and total cost of ownership., • Manage supplier changes including manufacturing process changes, production optimization, facility changes, new equipment qualification, and new line validations., • Drive changes to company requirements as necessary by initiating and managing changes to specifications and drawings through the engineering change order process., • Own and drive to closure supplier variances from symptom through root cause analysis to corrective action, including careful CAPA documentation., • Effectively prioritize and advance multiple concurrent projects and tasks, • Clearly communicate project status to key stakeholders, • Build, own, and relentlessly pursue a vision for developing suppliers., • Understand proper level of documentation detail for tracking of actions and justification of decisions., • Generate key metrics for the team and suppliers, and continually drive for timely achievement of those metrics., • Drive suppliers to continually improve their business and manufacturing process performance to meet company’s requirements for supplier excellence using a collection of best practices in project management, Six Sigma, Lean, SPC and negotiation. Lead these efforts without managerial guidance at several suppliers simultaneously., • Implement corrective and preventive actions for supplier process by driving supplier’s investigations and root cause analysis., • Provide effective and timely supply base health information and recommendation to management by creating and delivering data-driven supply base information to any level of management at company with little or no guidance., • Prepare and deliver supplier communications as required by independently working with suppliers on scorecard creation., • Work with suppliers and company engineering for the new product introduction to:, • Create product supplier landscapes to determine launch readiness and report to management., • Develop supplier ramp readiness plans by judging business risk based on forecast, supplier capacity, quality performance, and process capability., • DFM by engaging suppliers early in development cycle to feedback manufacturability improvements in the designs prior to production., • Influence and guide Engineering in choosing suppliers by determining selection criteria for preferred suppliers and leading the team effort to evaluate preferred suppliers., • Review, analyze and close customer complaints, manufacturing variance requests, and first article inspections by judging risk analyses and justifications., • Evaluate corrective and preventive actions at suppliers, looks for opportunities with suppliers to eliminate recurrence. Required Skills and Experience • Minimum 8 years related experience with an BS Engineering degree or 6 years’ experience with MS in Engineering, or 3 years’ experience with PhD., • Excellent written and verbal communication skills including presentations to executive level management., • Excellent Interpersonal skills and team building skills., • A proven history of implementing Lean/6 Sigma/SPC Programs at suppliers., • Excellent Project Management skills., • Excellent analytical and problem-solving skills along with good judgment., • Demonstrable knowledge in evaluating and challenging supplier technical, quality, and business capabilities., • Demonstrable knowledge of a wide range of manufacturing processes including understanding of key input variables for quality, cost, and capacity (specialization can be in metal fabrication, plastics, electronics, and/or contract manufacturing). Required Education and Training: • Minimum Education: BS degree in Engineering, advanced degree preferred., • Experience with statistical analysis software such as Minitab, • Ability to travel to suppliers on an as-needed basis – domestic and international. Preferred Skills and Experience • CAD experience with 3D modeling tools, • Experience in a high-volume medical device company Travel: 25% combination of domestic and international. Company DescriptionDella Infotech Inc is in the staffing business for 10 years. Over the years, we have placed hundreds of candidates to various temp and permanent positions with our 50+ happy clients all over US and Canada including Fortune 500 corporations.Della Infotech Inc is in the staffing business for 10 years. Over the years, we have placed hundreds of candidates to various temp and permanent positions with our 50+ happy clients all over US and Canada including Fortune 500 corporations.

Job DescriptionReady to make connectivity from space universally accessible, secure and actionable? Then you’ve come to the right place! E-Space is bridging Earth and space to enable hyper-scaled deployments of Internet of Things (IoT) solutions and services. We are building a highly-advanced low Earth orbit (LEO) space system that will fundamentally change the design, economics, manufacturing and service delivery associated with traditional satellite and terrestrial IoT systems. We’re intentional, we’re unapologetically curious and we’re 100% committed to innovate space-based communications and deliver actionable intelligence that will expand global economies, protect space and our planet and enhance our overall quality of life. We’re looking for a pragmatic, hands on Senior Materials Scientist to own polymer selection, testing, and lifetime prediction for spacecraft and space adjacent products. You will design custom experiments and equipment (e.g., UVinvacuum and cryogenic test rigs), write test procedures, execute and analyze results, and translate findings into clear design and qualification guidance aligned with NASA expectations. What you'll be doing: • Own polymer characterization for space environments: UV susceptibility (including VUV), vacuum/thermal behavior, atomicoxygen and radiation awareness, contamination/outgassing, and endoflife performance., • Design test strategies & procedures: create endtoend test plans, DOEs, acceptance criteria, and data packages for materials, adhesives, coatings, films, potting/encapsulants, and composites., • Build and operate custom rigs: conceive, specify, and bring up test equipment such as UVinvacuum exposure chambers, thermal vacuum cycling fixtures, LN₂based cryogenic setups, and environmental monitoring (e.g., radiometry, RGA, QCM)., • Model lifetime & degradation: develop physicsoffailure and empirical models (e.g., Arrhenius/WLF/timetemperature superposition, UV doseresponse, Weibull/statistical life) to predict performance over mission profiles (LEO/GEO/deep space)., • Execute and analyze: run tests, reduce data, quantify uncertainties, and deliver concise engineering recommendations and redlines to design/manufacturing., • Author documentation: write procedures, lab work instructions, and formal test reports suitable for internal design reviews and customer/agency audits., • Crossfunctional support: advise design, thermal, optical, contamination control, and manufacturing teams on material selection and qualification plans., • Own compliance & safety: uphold lab safety for vacuum, UV, cryogens, and high voltage; ensure calibration/traceability and good measurement practice., • Vendor & lab interfacing: qualify suppliers, specify external test campaigns (e.g., AO or radiation exposure), and review external lab reports., • Core Methods & Tools You’ll Use, • Thermal/Mechanical: DSC, TGA, DMA, TMA; thermalvacuum cycling; CTE and Tg determination; mechanical testing (e.g., tensile, peel, shear per common ASTM methods)., • Optical/UV: UVVis, FTIR for oxidation/yellowing, radiometry; UV sources (deuterium/xenon/UVLED), VUV exposure where applicable., • Vacuum/Contamination: outgassing and condensables (e.g., ASTM E595), QCMbased assessments (e.g., ASTM E1559), residual gas analysis (RGA)., • Surface/Chemistry: SEM/EDS, XPS, GCMS for volatiles, GPC/SEC for molecularweight changes., • Data & Modeling: Python/Matlab/JMP for DOE, regression, uncertainty, and lifetime modeling; clear visualization and reporting., • Familiarity with Space/NASA Guidance (examples), • NASA materials & processes expectations for spacecraft (e.g., M&P requirements/handbooks),, • GSFC environmental verification perspectives (e.g., thermalvacuum/TVAC per GEVS concepts),, • NASA contamination/outgassing acceptance practices (e.g., ASTM E595), and supplier documentation/waivers typical in flight programs. What you will bring to this role:, • 5–10 years applied experience in polymer/materials characterization with a strong handson laboratory bias., • Demonstrated ability to design from scratch: custom fixtures, chambers, exposure setups (vacuum + UV, LN₂/cryogenic), and to write robust procedures., • Depth in polymer degradation mechanisms (photooxidation, chain scission/crosslinking, volatilization/outgassing, thermal aging) and how they map to space conditions., • Proven skill in lifetime prediction and DOE/statistics, including building models that drive design decisions., • Excellent technical writing: clear test plans, procedures, and reports suitable for design reviews and audits., • Strong safety mindset around vacuum systems, UV sources, and cryogens., • BS/MS/PhD in Materials Science, Polymer Science, Chemical Engineering, or related discipline (or equivalent practical experience). Nice to have:, • Experience with atomic oxygen or radiation exposure testing (coordinating with external facilities is fine)., • Knowledge of contamination control for optics/thermal systems (e.g., lowoutgassing selections, bakeouts, cleanliness levels)., • Exposure to spacecraft development lifecycles, qualification/acceptance test flows, and supplier/material waivers., • Experience with adhesives for space (e.g., structural, optical, thermal interface) and film/blanket materials (e.g., polyimides, fluoropolymers)., • CAD/FEA familiarity for fixture/chamber design; shop interfaces for fabrication. • An opportunity to really make a difference• Sustainability at our core• Fair and honest workplace• Innovative thinking is encouraged• Competitive salaries• Continuous learning and development• Health and wellness care options• Financial solutions for the future • Optional legal services (US only)• Paid holidays• Paid time off

Job DescriptionJob Title: Staff Process Development Engineer Location: This position is based in our Campbell, California offices. This position is onsite and full time. Why Imperative Care? Do you want to make a real impact on patients? Imperative Care is changing the way stroke is treated. As part of our team, you’d be developing breakthroughs that will revolutionize the future of stroke care. Every day, the technologies that we develop at Imperative Care directly impact human lives. Our focus is on the needs of the patient, and they come first in everything we do. What You’ll Do As a member of our organization, you will take the lead on product and process development projects for neuro-interventional medical devices, with a focus on building stable, robust, and capable manufacturing processes. The scope includes defining, characterizing, optimizing, and validating processes, as well as driving equipment development and improvements internally and at supplier/contract manufacturer sites. The position requires someone who thrives on solving complex problems, applying structured engineering approaches, and translating design requirements into practical, manufacturable solutions. Work will span from early concept development through scale-up, with heavy emphasis on process characterization (DOEs, data analysis), equipment and fixturing design, and rigorous documentation. • Process Development: Own the development of new processes and improvement of existing ones—driving definition, characterization, optimization, and validation., • Technology Innovation: Identify, evaluate, and implement new process technologies that advance our manufacturing capabilities., • Equipment Development: Lead the design, qualification, and improvement of manufacturing equipment and fixturing., • Process Characterization: Plan, design, and mentor execution of DOEs to establish process windows, control limits, and workmanship standards., • Data-Driven Problem Solving: Apply DMAIC and other analytical methods to identify root cause, reduce variation, and drive robust solutions., • Cross-Functional Collaboration: Partner closely with R&D, QA/RA, and Operations to define manufacturable product specifications, visual standards, and workflows that ensure smooth transfer into production., • Documentation & Control: Lead documentation of equipment and processes, ensuring compliance with best practices, quality system requirements, and regulatory standards., • Supplier Engagement: Participate in the management, development, and qualification of external supplier processes., • BS in Engineering with 8+ years of related experience, or MS with 6+ years (medical device or other regulated industry preferred)., • Strong background in process characterization, validation, and scale-up in a controlled environment., • Skilled in analytical/statistical methods (DOE, SPC) with proficiency in Excel and Minitab., • Solid knowledge of FDA Design Control, DFSS/DFM tools, GMP/GDP, and relevant standards (ISO 13485, FDA QSR)., • Excellent critical thinking — able to connect cause and effect, prioritize under constraints, and deliver practical solutions., • Experience in pilot and production line setup, validation, and scale-up., • Proven ability to work independently and to lead/mentor others., • Strong communication and project management skills., • Molding experience is desirable., • Ability to travel as required.Employee Benefits include a stake in our collective success with stock options, competitive salaries, a 401k plan, health benefits, generous PTO, and a parental leave program. Join Us! Apply Today. Salary Range: $157,000 – 167,000/annually Please note that the salary information is a general guideline only. Imperative Care considers factors such as scope and responsibilities of the position, candidate's work experience, education/training, key skills, and internal equity, as well as location, market and business considerations when extending an offer. The use of external recruiters/staffing agencies requires prior approval from our Human Resources Department. The Human Resources Department at Imperative Care requests that external recruiters/staffing agencies not to contact Imperative Care employees directly in an attempt to present candidates. Complying with this request will be a factor in determining future professional relationships with Imperative Care. Imperative Care will not accept unsolicited resumes from any source other than candidates themselves for either current or future positions. Submission of unsolicited resumes in advance of an agreement between the Human Resources Department and the external recruiter/staffing agency does not create any implied obligation on the part of Imperative Care. Powered by JazzHR b11r6QVUW4

Job DescriptionDescription: Senior Quality Engineer Full-time / Permanent Salaried $115K - $125K *We are not currently working with third party agencies on this role. About Us: Vantedge Medical is the premier metals-based med-tech solutions partner from concept to full-scale manufacturing. We are at the forefront of precision engineering and innovation, specializing in the development and manufacturing of vital components for medical markets such as Robotic Assisted Surgery, Orthopedics, Surgical Instruments, Dental, and more. Our teams work in unison, collaborating and problem-solving to serve the manufacturing needs of the top Medical Original Equipment Manufacturers (OEMs) around the globe. Making a difference in the lives of patients and their families drives us to go above and beyond every day. With a steadfast commitment to advancing medical technology, we take immense pride in the work we do – and have a lot of fun doing it. About this Opportunity: Responsible for developing and implementing quality procedures, instructions and analysis of quality records. Also responsible for continuous improvement projects as assigned. Mentor and lead other quality engineers in fulfilling their duties in an efficient and effective manner. Responsibilities: • Applies professional training and experience to lead APQP teams and the development of process control plans, Failure Mode and Effects Analysis (FMEA’s), Gage Repeatability and Reproducibility (GR&R) studies, capability studies and other quality related tasks needed to comply with customer PPAP and internal requirements., • Uses independent judgment to develop inspection methods and gauging designs for new products., • Participate in Continuous Improvement activities such as idea/white board meetings., • Identify characteristics of new and revised products that are likely to create issues with PPAP approval and/or ongoing operations. Communicate these issues effectively and propose design-around quality solutions where possible., • Analyze and optimize the impact of new and revised quality plans on inspection resources and productivity., • Set up ongoing SPC per customer and internal requirements, coach others on its use and provide ongoing support when questions or problems arise. Exercise leadership with implementing practical SPC solutions that consider tooling and process limits as well as customer desires., • Review quality records, methods and ideas from coworkers to reduce inspection time without affecting part quality. Use data to recommend and implement scrap and rework reduction projects., • Assist others with problem solving techniques particularly as it relates to implementation of SPC and its effect on tooling maintenance. Applying scientific thinking in problem solving methodology., • Manage quality related projects according to documented procedures to ensure project scope, product requirements are met. Project management will include prompt and concise reporting of details including target conditions, actions and next steps with due dates., • Customer contact for inspection and qualification requirements issues., • Responsible for leading discussions and resolutions concerning supplier quality issues and required corrective actions., • Assist in meeting department goals and participate in strategic planning through the Policy Deployment process., • Mentor Quality Engineers., • Stay abreast of technologies that can improve inspection capability or productivity, recommend for purchase, plan and implement new equipment., • Lead the quality engineering activities needed to ensure compliance with quality system certifications., • Collaborate with coworkers in continuous Improvement activities and the idea system., • Maintains an organized, clean and safe work environment and follows 6S standards, • Properly follows all H & M procedures and policies., • Uses correct P.P.E. per JHA’s and job description., • Perform all other duties as assigned. Requirements: • Bachelor's degree (B.S.) or Associate’s degree (A.S.), • 10+ years of related experience and/or training., • Gauging, Methods/Design, Geometric Tolerance experience, • Use and calibration of measuring equipment, • Documentation design and control knowledge, • Leadership and Judgment skills, • Superior written and verbal communications skills, • Methodical, organized work habits, • Drive, initiative and follow-up, • Dependability and Stability, • Problem Solving Insight using scientific methodology

Job Description About Celestial AI As Generative AI continues to advance, the performance drivers for data center infrastructure are shifting from systems-on-chip (SOCs) to systems of chips. In the era of Accelerated Computing, data center bottlenecks are no longer limited to compute performance, but rather the system's interconnect bandwidth, memory bandwidth, and memory capacity. Celestial AI's Photonic Fabric™ is the next-generation interconnect technology that delivers a tenfold increase in performance and energy efficiency compared to competing solutions. The Photonic Fabric™ is available to our customers in multiple technology offerings, including optical interface chiplets, optical interposers, and Optical Multi-chip Interconnect Bridges (OMIB). This allows customers to easily incorporate high bandwidth, low power, and low latency optical interfaces into their AI accelerators and GPUs. The technology is fully compatible with both protocol and physical layers, including standard 2.5D packaging processes. This seamless integration enables XPUs to utilize optical interconnects for both compute-to-compute and compute-to-memory fabrics, achieving bandwidths in the tens of terabits per second with nanosecond latencies. This innovation empowers hyperscalers to enhance the efficiency and cost-effectiveness of AI processing by optimizing the XPUs required for training and inference, while significantly reducing the TCO2 impact. To bolster customer collaborations, Celestial AI is developing a Photonic Fabric ecosystem consisting of tier-1 partnerships that include custom silicon/ASIC design, system integrators, HBM memory, assembly, and packaging suppliers. ABOUT THE ROLE We are seeking an experienced Package Reliability Engineer with expertise in 2.5D/3D advanced packaging. The ideal candidate will have a strong background in physics of failure, materials science, and experience working closely with OSATs to drive package reliability improvements. This role requires collaboration with external assembly and test partners, internal design, process, and failure analysis teams, and suppliers to ensure the reliability and manufacturability of cutting-edge semiconductor packages. ESSENTIAL DUTIES AND RESPONSIBILITIES • Reliability Analysis & Risk Assessment:, • Conduct physics of failure (PoF)-based reliability modeling for 2.5D/3D advanced packaging., • Assess package reliability risks from thermal, mechanical, and electrical stressors., • Define and execute stress test plans (e.g., thermal cycling, humidity, electromigration) to validate package robustness., • OSAT Management & Collaboration:, • Work closely with OSAT partners to drive package reliability improvements, process optimizations, and yield enhancements., • Define reliability requirements, review test methodologies, and ensure OSAT compliance with JEDEC and industry standards., • Monitor and evaluate OSAT performance in executing reliability qualifications and failure analysis., • Support supplier audits and technical reviews to assess manufacturing capabilities and reliability processes., • Material Characterization & Selection:, • Evaluate and select materials (substrates, dielectrics, adhesives, underfills) for optimal reliability., • Analyze CTE mismatches, warpage, delamination, and interfacial adhesion issues., • Work with material suppliers and OSATs to qualify new materials for advanced packaging applications., • Failure Analysis & Root Cause Identification:, • Lead failure mode analysis (FMEA), model-based problem solving (MBPS) and determine root causes of package failures using techniques such as FIB, X-ray, SEM, and TEM., • Identify and mitigate interfacial failures, cracking, voiding, electromigration, and stress-induced damage., • Drive OSATs and internal teams to implement corrective and preventive actions (CAPA)., • Process & Design Collaboration:, • Work cross-functionally with internal design, process, and manufacturing teams to define assembly test vehicles and optimize package architectures., • Develop and refine design guidelines, process improvements, and reliability best practices., • Education: Master's or Ph.D. in Materials Science, Mechanical Engineering, Electrical Engineering, Applied Physics, or a related field., • Experience: 5-10 years of hands-on experience in 2.5D/3D advanced packaging reliability., • Technical Expertise:, • Deep understanding of physics of failure (PoF) methodologies for package reliability., • Strong knowledge of materials science, particularly in interconnects, substrates, and interfaces., • Proficiency in stress modeling tools (ANSYS, Abaqus, COMSOL, etc.) for thermo-mechanical analysis., • Experience with failure analysis techniques such as C-SAM, X-ray CT, SEM, TEM, FIB, and EBSD., • OSAT Collaboration Experience:, • Proven track record of working with and driving OSAT partners for package reliability, yield, and continuous quality improvements., • Experience managing OSAT qualifications, failure analysis, and corrective actions., • Familiarity with supplier engagement, reliability testing at OSATs, and package process flows., • Industry Knowledge: Familiarity with JEDEC, IPC, IEEE, and MIL-STD reliability standards., • Soft Skills: Strong analytical, problem-solving, and cross-functional collaboration skills. PREFERRED QUALIFICATIONS • Experience in heterogeneous integration, fan-out packaging, chiplet architectures., • Knowledge of electrical reliability mechanisms (e.g., electromigration, time-dependent dielectric breakdown)., • Expertise in AI-driven reliability modeling or machine learning for failure prediction. LOCATION: Santa Clara, CA For California Location: As an early stage start up, we offer an extremely attractive total compensation package inclusive of competitive base salary, bonus and a generous grant of our valuable early-stage equity. The target base salary for this role is approximately $185,000.00 - $225,000.00. The base salary offered may be slightly higher or lower than the target base salary, based on the final scope as determined by the depth of the experience and skills demonstrated by candidate in the interviews. We offer great benefits (health, vision, dental and life insurance), collaborative and continuous learning work environment, where you will get a chance to work with smart and dedicated people engaged in developing the next generation architecture for high performance computing. Celestial AI Inc. is proud to be an equal opportunity workplace and is an affirmative action employer. #LI-Onsite

Job Description About the Job: As a Senior NPI / Process Engineer, you will serve as the Subject Matter Expert (SME) for PCB manufacturing and electronic assembly processes. You will lead, mentor and guide engineering teams to enhance process performance, efficiency and product quality across manufacturing operations. This role requires a seasoned technical leader with deep expertise in process engineering, Six Sigma/Lean methodologies, and New Product Introduction (NPI). You will drive continuous improvement, ensure superior quality standards and collaborate closely with both customer and supplier teams. Key Responsibilities: * Serve as the SME for all PCB manufacturing and electronic assembly processes, providing expert-level guidance across global teams. * Lead, manage and mentor engineering teams to drive productivity, process optimization and manufacturing excellence. * Manage complex projects to develop, analyze and improve manufacturing processes, improving efficiency and quality. * Apply Six Sigma and Lean Manufacturing principles to reduce costs and enhance production quality. * Design and execute process Design of Experiments (DOEs) to evaluate and optimize key process parameters. * Oversee facility layout and assembly flow optimization to ensure efficient production operations. * Implement process improvements, including tooling, material, and method validation for new and existing products. * Lead and mentor teams in Design for Manufacturability (DFM) and New Product Introductions (NPIs), ensuring smooth transitions from prototype to production. * Conduct lessons learned reviews post-NPI and drive corrective actions for continuous improvement. * Collaborate with Quality and Manufacturing Engineering to address customer issues, perform Root Cause Analysis (RCA) and implement Corrective Actions (CA). * Act as the technical point of contact for customers regarding process-related technical support. * Demonstrate a strong understanding of solder paste stencil design and application best practices. * Lead process improvement and new process development projects, driving scalable solutions into production. * Mentor and develop Process Engineering personnel, providing technical leadership and guidance. * Drive continuous improvement initiatives across products and sites to enhance overall manufacturing performance. * Ensure compliance with the Quality Management System (QMS) and all applicable regulatory standards. Requirements: * Onsite role (remote or hybrid not available). * Bachelor’s degree in Electrical, Chemical, Mechanical, Industrial Engineering or a related field. * Minimum 7-10 years’ experience in electronics manufacturing, process engineering, or a related technical discipline. * Strong knowledge of PCBA, SMT, and electronic assembly processes. * Proven ability to lead teams, manage complex projects, and drive continuous improvement initiatives. * Excellent communication skills and high attention to detail. * Self-motivated with the ability to work effectively in a cross-functional team environment. Preferred Experience: * PCBA failure analysis (cross-section, dye-and-pry, etc.) * Lead-free materials and soldering technologies * High-density interconnect (HDI) and micro-via technologies * Manual and robotic soldering processes (including BGA rework) * Tooling and fixture design * Epoxy and corner-bonding applications * Manual and automated conformal coating processes Job status: Full-time, direct hire Base pay range: $100k - $110k/year Foxconn Assembly, LLC is an Equal Opportunity Employer (EOE). All qualified candidates will receive consideration without regard to race, color, religion, gender, sexual orientation, national origin, age, disability, or marital status in accordance with applicable federal, state, and local laws. Foxconn Assembly, LLC participates in E-Verify and will provide the federal government with your Form I-9 information to confirm your authorization to work in the U.S. Powered by JazzHR QgBnLByZvt

Job Description *Due to the classified nature of our work, U.S. citizenship is required. * Job Title: Quality Engineer Location: Sunnyvale, CA Who are we looking for? Pacific Defense is looking for a talented and enthusiastic Quality Engineer with outstanding technical, organizational and communication skills to join our small, elite team working in Sunnyvale, CA. Our high-performance systems are used for a variety of applications such as signals intelligence, secure/covert digital communications, threat detection, RF jammers, radio direction finding. To build these systems, we utilize state of the art hardware components such as FPGAs, SoCs, GPUs, and advanced software and firmware techniques that allow intuitive command and control of systems as well as data collection and processing. This position ensures that all quality aspects are met, and the end product meets all contractual requirements. Areas of specialization include design, incoming material, production control, product evaluation, process evaluation, reliability review, documentation sign-off, testing support, and detailed inspection. The selected candidate owns reporting supplier performance and quality to management. Assist in the development and implementation of supplier management programs. Track and qualify or disqualify suppliers according to organization's standards. Maintain successful relationships with supply, engineering, and manufacturing, departments. Requirements What You'll Get to Do: • Create or tailor existing quality planning to administer customer and internal quality requirements to Spectranetix program teams and supply base., • Implement Quality Engineering responsibilities as a member of a program integrated product team (IPT), • Ensure Quality Engineering engagement in program development, design, test requirements and verification, including the transition of design to production., • Lead multi-functional teams in problem resolution and continuous improvement activities with an emphasis on Six Sigma, Lean practices and other critical thinking improvement methods and resources., • Guide business and program performance utilizing predictive and proactive measures and metrics., • The ability to maintain positive relationships with program administration, cross-functional program stakeholders, suppliers, customers, and government representatives., • Act as the Business Owner of the Supplier Quality Management processes, • Will play key role in implementation of Pacific Defense Quality Management System (QMS), • Lead supplier quality audits and assure the quality of incoming materials., • Develop and implement Incoming Quality Control (IQC) process, • Provide technical guidance for containment and creating record of of Non-conforming materials (NCMR), and lead communication with suppliers for Supplier Corrective Action Requests (SCAR), • Develop and maintain supplier key performance indicators (KPI), • Routinely review supplier quality performance with cross functional team, • Ensures traceability to Configuration Management guidelines, • Support investigations of supplier non-conformance issues, • Extensive working knowledge of Supplier Quality Management practices., • Familiarity with application and adherence to Quality Management Systems ISO 9001 and/or AS9000, applicable experience required., • Experience with HW and SW Configuration Management., • Ability to interface well with Product Development Engineering resources., • Must be self-motivated and able to work with minimal supervision., • Effective communicator able to work independently and in teams., • ASQE, Six Sigma Black/Green Belt or Lean certification a strong plus., • Working knowledge of Industry and Government Quality Requirements and Standards, • Ability to collaborate with program team members to develop practical solutions to complex problems., • Working knowledge of Root Cause and Corrective Action (RCCA) / Corrective Action Preventive Action (CAPA) methodologies, systems and resources., • Experience in predictive and proactive measures and metrics assessments and supporting actions to improve performance or mitigate problems., • DoD industry experience, • Past or present regular member or chair of Material and Failure non-conformance review boards (MRB/FRB), • Experience in developing or a member of risk & opportunity management, assessment, mitigation, and capture., • Six Sigma Greenbelt Certification, • ASQ Certified Quality Engineer or Six Sigma Black Belt, • Experience with statistical and metrics software (e.g., Tableau, Minitab), • Experience with factory systems and software (e.g., Arena, MRP), • Minimum requirement: BS in EE, CS, or relevant discipline, • MS in EE, CS, or a relevant discipline preferred. Who are We? Pacific Defense is focused on supporting the DoD’s disciplined movement to modular open standards and to mirror the way military services address EMS warfare – holistic mission planning and execution. Products are designed from the outset for modern, AI-driven autonomy and CMOSS and SOSA-aligned hardware and software solutions.Focus areas include autonomous systems, command and control, communications, cyber operations, intelligence collection, and electronic warfare. Perceptronics Solutions, is a part of the Pacific Defense family, specializing in highly-advanced RF spectrum technologies, and engineering with innovative AI-backed algorithms. Benefits Pacific Defense provides competitive salaries and immediately vested 401K match. We provide 100% coverage for the employee, and 75% coverage for dependents’ medical, dental, vision, and life insurance premiums, as well as a flexible spending account for incidental health care expenses. We offer paid time off and federal holidays to spend time with family, pursue outside interests, or just get some extra rest. Pacific Defense is an Equal Opportunity Employer and considers qualified applicants for employment without regard to race, color, creed, religion, national origin, sex, sexual orientation, gender identity or expression, age, disability, veteran status, or any other protected factor.

Job DescriptionSalary: Job Title: Quality Manager, Power Electronics Products Location: California Reports To: VP of Global Quality Role Overview The Quality Manager (Power Electronics Products) position is to provide Quality Engineering service to one of our most important customer in the clean energy sector. Needs to ensure that all Products meet the stringent quality requirements and standards of the customer throughout the product lifecycle. This role acts as the primary Quality liaison between customers, Sales team, Plant quality teams, and Global engineering teams, driving compliances and meeting Customer Quality Requirements. The position will support NPI (New Product Introduction) Processes into Production release and Qualification at Customer and provide quality Support till EOL, with robust quality practices. The position requires expertise in FAT/SAT, DFMA, and advanced quality tools, with a strong focus on continuous improvement and quality management skills. Quality Engineering experience in power electronics such as Power Distribution Systems (PDS), Switchgear electrical equipment, Transformers, DC/AC Energy Conversion modules, and Automatic Transfer Switches is Highly preferred. Key Responsibilities Customer & Internal Liaison • Serve as the main quality interface between customers and internal teams, ensuring clear communication and timely resolution of quality issues., • Represent plant quality during customer audits, FAT (Factory Acceptance Test), and SAT (Site Acceptance Test)., • Lead quality planning and execution during NPI phases for new products (Transformers, PDS, Switchgear MV, ECM, Ultra Capacitors)., • Collaborate with engineering teams in China and local manufacturing teams to ensure DFMA (Design for Manufacturing & Assembly) principles are applied., • Validate product compliance with UL and other regulatory standards., • Develop and implement quality control plans for all product lines., • Conduct DFMEA/PFMEA and risk assessments during design and production phases., • Drive root cause analysis and corrective actions using 8D methodology., • Implement Lean Six Sigma and Kaizen initiatives to improve process capability and reduce defects., • Maintain detailed quality documentation for NPI, FAT/SAT, and compliance audits., • Provide regular quality performance reports to senior management and customers. Qualifications • Bachelors degree in engineering (Electrical /Mechanical Engineering), • 5-8 years of experience in product quality management for complex power electronics products., • Experience in quality control, manufacturing, or quality engineering is necessary, with a preference for experience in the clean energy, renewable energy, or industrial sector., • Strong knowledge of FAT, SAT, DFMA, NPI processes, and UL certification., • Proficiency in quality tools: PPAP, Control Plans, FMEA, SPC, 8D problem-solving., • Certifications: ASQ CQE (Certified Quality Engineer), Six Sigma Green/Black Belt preferred., • Experience working with global teams (China collaboration highly desirable). Preferred Skills • Excellent communication and stakeholder management skills., • Strong leadership and project management capabilities., • Ability to analyze quality metrics and trends using statistical tools.

Job Description Position Description: Mixed signal IC Staff design engineer Regular Full-time Location: Milpitas, CA Principle Duties and Responsibilities: * Design, simulate and verify analog and digital circuit for ultra low jitter PLL, PFD Link, digital filter, Fraction N divider, FOD and high- performance output buffer using deep submicron CMOS process technology. * Understand design specifications and product architecture, create and perform top level simulations with appropriate modelling. * Supervise physical layout work. * Work with test engineering and product engineering for product characterization and post silicon verification, provide occasional customer support. * Create and maintain documentations for the related projects. Requirements: * MSEE/PhD with 3+ years of related industrial experience or BSEE with 5+ years of experience. * Solid knowledge in high performance CMOS mixed signal circuit design. * Has experiences in standard output buffer of LVPECL, LVDS, HCSL, CMOS design. * Has experiences of Fraction Output Divider is a plus. * Hands on in Cadence tool set, Synopsys tool set, Spectre & Hspice simulation tool, Matlab, and layout tools. * Ability to work as a team and able to work across other groups. Company DescriptionDiodes Incorporated (Nasdaq: DIOD), a Standard and Poor’sSmallCap 600 and Russell 3000 Index company, is a leading global manufacturer and supplier of high-quality application specific standard products within the broad discrete, logic, and analog semiconductor markets. Diodes serves the consumer electronics, computing, communications, industrial, and automotive markets. We offer a competitive benefits package to include medical, dental, vision, FSA, 401k with company match, company paid Short Term and Long Term disability and standard life insurance policy. We also provide paid time off, employee wellness program and an onsite gym.Diodes Incorporated (Nasdaq: DIOD), a Standard and Poor’sSmallCap 600 and Russell 3000 Index company, is a leading global manufacturer and supplier of high-quality application specific standard products within the broad discrete, logic, and analog semiconductor markets. Diodes serves the consumer electronics, computing, communications, industrial, and automotive markets. \r\n\r\nWe offer a competitive benefits package to include medical, dental, vision, FSA, 401k with company match, company paid Short Term and Long Term disability and standard life insurance policy. We also provide paid time off, employee wellness program and an onsite gym.

Job DescriptionCompany OverviewEmbark on an enriching journey with PROCEPT BioRobotics, where our vision, mission, and values guide everything we do as a company. At PROCEPT, we put the patient first in everything we do and are committed to revolutionizing treatment for benign prostatic hyperplasia (BPH, otherwise known as prostate gland enlargement) through innovation in surgical robotics. As our company succeeds and grows, we improve the quality of life of patients, provide more effective treatment options for surgeons, uphold the trust of our shareholders. That starts with a commitment to our People with a focus on creating an evolving landscape for your career, brimming with transformative opportunities that provide continuous career growth opportunities. The Opportunity That Awaits You:Are you ready to embark on an exciting journey with PROCEPT BioRobotics? As we continue to grow and scale our operations team at PROCEPT, we have an excellent opportunity for a new Senior Supply Engineer who is responsible for ensuring suppliers meet Procept’s requirements for quality, service, delivery, and cost. Drives suppliers to continuously improve business and manufacturing processes. Collaborates with Supplier Quality to evaluate and select suppliers. Guides R&D in choosing suppliers for new products and provides DFM input to new designs. Supports both NPI and on-going production, monitoring and working with suppliers to improve supplier performance. Executes detailed projects with suppliers to implement changes and improvements affecting quality, cost, capacity, risk, and sub-supplier management. The ideal Candidate possesses broad and deep manufacturing experience for processes such as assembly of medical devices, machining, plastic injection molding experience etc.What Your Day-To-Day Will Involve: • Own and manage contract manufacturer and supplier qualifications of components, sub assemblies used in Aquablation capital equipment components, disposables and accessories as assigned. Typical parts include mechanical machined components, molded components, electronics, electro-mechanical and camera systems., • Assess and drive supplier qualification requirements and complete project/ part qualification deliverables including: Supplier pFMEA, Process Validations (IQ/OQ/PQ), Inspection Reports, Gage R&R, and Process Capability Analysis., • Manage and coordinate problem solving and root cause identification for parts not meeting requirements or specifications., • Review and approve supplier protocols, qualification reports. Release documentation and reports in Change management systems (ECO)., • Develop supplier ramp readiness plans by judging business risk based on forecast, supplier capacity, quality performance, and process capability. Identify supply capacity gaps and develop plans to mitigate (capacity expansions, qualification of additional tooling, lines etc to meet target business plan capacity)., • Manage supplier changes (for mechanical parts/assemblies) including manufacturing process changes, production optimization, facility changes, new equipment qualification, and new line validations., • Work with suppliers to execute cost reductions, capacity improvements, and risk mitigation., • Generate key metrics for the suppliers, and continually drive for timely achievement of those metrics., • Drive suppliers to continually improve their manufacturing process performance to meet Procept’s requirements for supplier excellence using a collection of best practices in project management, Six Sigma, Lean, SPC and negotiation. Lead these efforts without managerial guidance at several suppliers simultaneously., • Investigate and drive rework, corrective actions for purchased part raw material non-conformance, • Work closely with supplier quality team to develop and implement corrective and preventive actions for supplier processes by driving supplier’s investigations and root cause analysis., • DFM by engaging suppliers early in development cycle to provide feedback regarding manufacturability improvements in the designs prior to production., • Effectively prioritize and advance multiple concurrent projects and tasks., • Research and recommend new technologies to improve reliability, efficiency and contribute to cost reduction., • Maintain trained status for, and comply with, all relevant aspects of the PROCEPT BioRobotics Quality Management System to ensure product quality and support regulatory compliance., • Understand and adhere to the PROCEPT BioRobotics Quality and EHS policies., • May require up to 20% travel, domestic and international.The Qualifications We Would Like You to Possess:, • BS in Mechanical Engineering or equivalent with a minimum of 5 years experience., • Prior experience in the medical device industry is preferred., • Experience in leading highly technical projects in a cross functional environment both internally and with CMs/Suppliers., • Experience with metals component manufacturing processes. Understanding of metallurgy, metals material selection, secondary processes such as heat treatment, anodizing, deburring, passivation etc., • Demonstrable knowledge in evaluating and challenging supplier technical, quality, and business capabilities., • Extensive experience with root cause analysis and problem solving for both technical and process issues., • Basic working knowledge of CAD (SolidWorks or other) software., • Ability to read and interpret detailed mechanical drawings (GD&T) and communicate technical information., • Ability to interpret and understand the impact of purchased part changes like alternate raw material change, supplier process change, supplier tooling change, etc. to the internal manufacturing process and design, and develop, implement/execute qualification test case., • Experience working in a structured design process such as ISO9000 or FDA QSR, knowledge of regulatory approval process and requirements., • Working knowledge of design control and cGMP requirements for medical device manufacturing per FDA QSR and ISO13485-2003 or ISO9001 and EN46001, including experience in auditing suppliers to these standards., • Ability to work in a cross functional environment, lead meetings, follow up on action items and deadlines. Escalate issues as and when necessary., • Ability to travel to suppliers on an as needed basis – domestic and international.Physical Demands, • The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions., • While performing the duties of this job, the employee is regularly working in an office environment., • The employee will then occasionally be exposed to engineering labs, a machine shop, and manufacturing clean rooms. This environment is subject to moderate noise from machinery (IE machine shop equipment, the PROCEPT Aquablation unit, computer equipment, printers, etc.), for which proper hearing protection may be assigned and worn., • The employee may be exposed to hazards including electrical sparking, water, and chemicals, for which proper protective equipment may be assigned and worn., • The above statements are intended to describe the general nature and level of work being performed.

Job DescriptionSr. Laser Product Engineer - III-V, SOA Job Title: Sr. Laser Product Engineer Location: Santa Clara, CA Compensation: $200K - $260K base DOE plus equity Requirement: 10+ years of experience in lasers, SOAs, or photonic component engineering, III-V semiconductors, Product Qualification, Reliability Testing, Supplier Management Position Overview We are seeking a highly skilled Sr. Laser Product Engineer with expertise in III-V semiconductor technology and semiconductor optical amplifiers (SOA). The ideal candidate will play a critical role in developing and optimizing photonic components, ensuring product reliability, and managing the entire product lifecycle from concept to volume production. Key Responsibilities • Design and develop advanced laser products based on III-V semiconductor technology., • Lead reliability testing and failure analysis for laser products and SOAs., • Manage and optimize product lifecycle processes from development to volume ramp., • Collaborate with cross-functional teams for process development and qualification of new products., • Oversee supplier management to ensure quality and timely delivery of components., • Bachelor's (Master's or PhD Preferred) in Electrical Engineering, Optical Engineering, or a related field., • 10+ years of experience in laser product engineering or related roles., • Strong knowledge of semiconductor optical amplifiers (SOA) and photonic components., • Proven experience in reliability testing and failure analysis methodologies., • Familiarity with product lifecycle management and process development., • Excellent problem-solving skills and ability to work collaboratively in a team environment., • Fully paid medical, dental, and vision, • Bonus Potential, • Employee Stock Options, • PTO/Vacation, • 401K - For this position, you must be currently authorized to work in the United States without the need for sponsorship for a non-immigrant visa. CyberCoders will consider for Employment in the City of Los Angeles qualified Applicants with Criminal Histories in a manner consistent with the requirements of the Los Angeles Fair Chance Initiative for Hiring (Ban the Box) Ordinance.This job was first posted by CyberCoders on 11/14/2025 and applications will be accepted on an ongoing basis until the position is filled or closed.CyberCoders is proud to be an Equal Opportunity Employer All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, age, sexual orientation, gender identity or expression, national origin, ancestry, citizenship, genetic information, registered domestic partner status, marital status, status as a crime victim, disability, protected veteran status, or any other characteristic protected by law. CyberCoders will consider qualified applicants with criminal histories in a manner consistent with the requirements of applicable state and local law, including but not limited to the Los Angeles County Fair Chance Ordinance, the San Francisco Fair Chance Ordinance, and the California Fair Chance Act. CyberCoders is committed to working with and providing reasonable accommodation to individuals with physical and mental disabilities. Individuals needing special assistance or an accommodation while seeking employment can contact a member of our Human Resources team at to make arrangements.

Job DescriptionAppZen is the leader in autonomous spend-to-pay software. Its patented artificial intelligence accurately and efficiently processes information from thousands of data sources so that organizations can better understand enterprise spend at scale to make smarter business decisions. It seamlessly integrates with existing accounts payable, expense, and card workflows to read, understand, and make real-time decisions based on your unique spend profile, leading to faster processing times and fewer instances of fraud or wasteful spend. Global enterprises, including one-third of the Fortune 500, use AppZen’s invoice, expense, and card transaction solutions to replace manual finance processes and accelerate the speed and agility of their businesses. To learn more, visit us at . The Integration Engineer is responsible for building, implementing, and maintaining integrations between AppZen and our customers' enterprise systems. This is a hands-on technical role focused on delivering robust, scalable integration solutions. You will work directly with customer technical teams, write code, configure iPaaS platforms, troubleshoot production issues, and ensure data flows seamlessly across systems. If you enjoy rolling up your sleeves, solving complex integration puzzles, and seeing your work directly impact customers, this role is for you.In This Role You Will: • Build and deploy integrations connecting AppZen with customer ERP, procurement, and financial systems using iPaaS platforms like Workato, MuleSoft, Boomi, or Celigo, • Develop, test, and maintain RESTful APIs, SOAP web services, webhooks, and flat file-based integrations (CSV, XML, JSON), • Write and maintain integration scripts and custom connectors using Python, JavaScript, or Java, • Configure and manage secure file transfers using SFTP, AS2, and cloud storage solutions, • Implement and troubleshoot Single Sign-On configurations (SAML, OAuth 2.0, OIDC), • Monitor integration jobs, investigate failures, and resolve production issues with urgency, • Write SQL queries for data validation, transformation, and troubleshooting, • Build reusable Workato recipes, MuleSoft flows, or equivalent automation workflows, • Create and maintain technical documentation including integration specifications, data mappings, and runbooks, • Participate in customer calls to gather requirements, demo solutions, and provide technical support, • Collaborate with Product, Engineering, and Customer Success teams to improve integration capabilities, • Perform root cause analysis on integration failures and implement permanent fixesWhat You Will Bring to AppZen:, • 5–8 years of hands-on experience building and supporting enterprise integrations, • Strong proficiency with at least one iPaaS platform: Workato, MuleSoft Anypoint, Dell Boomi, Celigo, or SnapLogic, • Solid programming skills in Python, JavaScript, or Java—you write production-quality code, • Hands-on experience with RESTful API development and consumption, including authentication methods (API keys, OAuth, JWT), • Working knowledge of SOAP web services and XML/XSLT transformations, • Experience with SFTP, secure file handling, and batch processing workflows, • Familiarity with Finance and Procurement processes (Procure to Pay, Accounts Payable, Expenses) is a strong plus, • Exposure to enterprise systems such as Workday, NetSuite, Coupa, Microsoft Dynamics, or similar, • Experience with cloud platforms (AWS, Azure, or GCP)—comfortable navigating S3, Lambda, API Gateway, or equivalent services, • Strong troubleshooting mindset—you dig into logs, trace data flows, and don't stop until you find the root causeTechnical Skills Required:, • Proficient in writing and debugging integration code in Python, JavaScript, or JavaHands-on experience building Workato recipes, MuleSoft flows, or Boomi processes, • Strong SQL skills for querying relational databases (PostgreSQL, MySQL, SQL Server), • Familiarity with NoSQL databases (MongoDB, DynamoDB) is a plus, • Experience with EDI standards (cXML, ANSI X12) for supplier integrations, • Comfortable with API testing tools like Postman, Insomnia, or cURL, • Understanding of CI/CD practices and version control (Git), • Experience with logging and monitoring tools (Splunk, Datadog, CloudWatch, or similar), • Familiarity with message queues (Kafka, RabbitMQ, SQS) and event-driven patterns is a plusBonus Points For:, • Workato Automation Pro or MuleSoft Developer certification, • Experience with Temporal or similar workflow orchestration frameworks, • Prior experience in a SaaS product company supporting customer integrations, • Exposure to data transformation tools like dbt or InformaticaWe are an equal opportunity employer and value diversity. All employment is decided on the basis of qualifications, merit and business need.

Job Description Union Technologies is reindustrializing America’s defense manufacturing base with a first-of-its-kind Factories-as-a-Stockpile™ model, integrating advanced robotics, manufacturing, and software into sovereign factory systems at scale. Headquartered in Dallas, Texas, UNION is dedicated to restoring America’s industrial strength and guaranteeing deterrence for the century ahead. We recently emerged from stealth with $50M in funding led by top-tier venture investors and strategic partners. Read more in our Press Release Job Summary: We need a battle-ready Manufacturing Engineer to forge steel parts that defend the U.S. homeland. With 5+ years of experience, you’ll design and optimize processes in our facility, wielding CAD tools (SolidWorks/AutoCAD) like weapons to ensure precision and efficiency. Expect tight deadlines, high stakes, and an ISO 9001 battlefield where you’ll lead with a hands-on, “in the trenches” approach. Key Responsibilities: * Forge steel parts for defense systems, optimizing processes for maximum efficiency and quality. * Use SolidWorks/AutoCAD to design line layouts, fixtures, and tools that keep production razor-sharp. * Lead factory acceptance testing (FAT) to ensure equipment meets mission-critical standards. * Create standard work instructions (SWIs) to lock in consistency under ISO 9001. * Drive lean improvements to cut waste and boost output in a high-pressure environment. * Collaborate with production and quality teams to crush manufacturing issues on the spot. Required Qualifications: * Education: Bachelor’s in Manufacturing, Mechanical, or Industrial Engineering. * Experience: 5+ years in metal forging; ISO 9001 experience; proven project leadership under fire. * Technical Skills: Mastery of SolidWorks/AutoCAD; process design; fixture/tool expertise. * Leadership/Work Style: Hands-on, “in the trenches” grit; thrives under tight deadlines. * Soft Skills: Sharp problem-solver; team player; precision-driven. * Physical Requirements: Ready to stand, lift (up to 50 lbs), and fight on the shop floor. Preferred Qualifications: * Deep forging process knowledge. * ERP/MRP system experience. * Automation/robotics exposure. Work Environment: You’ll be on the front lines in a our manufacturing facility—think noise, machinery, and occasional travel for supplier missions. Benefits: * Competitive salary + bonuses. * Full health, dental, vision. * Paid time off + holidays. * Growth opportunities Join the mission. We'll handle the move. Exceptional talent shouldn't be bound by geography. If you're ready to relocate to Dallas, TX and join us in reindustrializing America’s defense backbone, we'll make it easy—and for those who move quickly, additional incentives may be available. Compensation Range: $101K - $191K

Job DescriptionSenior Quality Engineer Foxconn is seeking a highly experienced and driven Senior Quality Engineer to join our team. In this critical role, you will ensure product quality across complex PCBA and system-level manufacturing processes, while serving as a key technical liaison between internal teams, suppliers, and customers. You will lead data-driven investigations, drive corrective actions, and hold partners accountable for meeting quality standards. A major focus of this position is ensuring flawless quality execution during New Product Introduction (NPI) builds, partnering with engineering and operations teams to validate manufacturability, compliance, and scale-up readiness. Key Responsibilities: • Lead weekly Quality Summary Reports for internal and external stakeholders, providing analysis, trends, and corrective action updates., • Analyze yield data and failure analysis reports across PCBA, mechanical, and system-level processes., • Identify recurring quality issues and drive root-cause investigations with cross-functional teams and supply-chain partners., • Ensure NPI build quality management, including first-article inspection, validation of new processes, and early detection of design or manufacturability issues., • Hold sub-tier vendors and factory teams accountable when defect trends impact customer deliverables., • Serve as the primary point of contact for quality escalations on assigned products and processes, demonstrating strong customer service skills in managing expectations and providing timely resolutions., • Review and validate supplier and factory FA (Failure Analysis) reports for accuracy and alignment with expectations., • Apply critical thinking skills to interpret complex data, evaluate risks, and implement effective solutions., • Lead or support cross-functional quality improvement initiatives, audits, and process reviews., • Mentor and provide technical guidance to junior engineers and technicians., • Bachelor’s degree in Electrical Engineering or a related technical field., • Minimum 5 years’ experience in quality or manufacturing engineering., • Strong analytical and critical thinking skills with expertise in yield, test, and defect data analysis., • Solid understanding of SMT, PIH, test processes, and RMA repair., • In-depth knowledge of electronic theory, digital/analog circuitry, and PC system architecture., • Expertise in applying IPC-A-610D (acceptability of electronic assemblies) and J-STD-001 (JSPEC) soldering standards for complex PCBA and system assembly., • Proven ability to lead cross-functional teams through root-cause analysis and corrective actions., • Excellent verbal and written communication skills, with the ability to influence at all levels internally and externally., • Experience in NPI quality management, including ramp-to-mass production transitions., • Experience in silicon manufacturing and testing environments., • Familiarity with mechanical manufacturing processes., • Professional certifications (Six Sigma, Lean, CQE, etc.)., • Proficiency with MS Office (Excel, Word, PowerPoint)., • Multilingual ability in Mandarin, Spanish, or Vietnamese is a plus. Foxconn Assembly LLC is an Equal Opportunity Employer (EOE). All qualified candidates will receive consideration without regard to race, color, religion, gender, sexual orientation, national origin, age, disability, or marital status in accordance with applicable federal, state and local laws. Foxconn Assembly, LLC participates in E-Verify and will provide the federal government with your Form I- 9 information to confirm that you are authorized to work in the U.S. Salary Range for this position: US$95,000 - US$105,000/annum Powered by JazzHR 6dsbgrpKzW

Chemical Engineering, Mechanical Engineering, Electrical Engineering, Industrial Engineering, Materials Science or Physics* Must be able to establish demonstrated technical credibility with the Engineering Staff (internally and with suppliers). Senior Staff Supplier Quality Engineer page is loaded##

Job DescriptionJob Title: Sr Quality Engineer Location: This position is based in our Campbell, California offices. This position is full time. Why Imperative Care? Do you want to make a real impact on patients? Imperative Care is changing the way stroke is treated. As part of our team, you’d be developing breakthroughs that will revolutionize the future of stroke care. Every day, the technologies that we develop at Imperative Care directly impact human lives. Our focus is on the needs of the patient, and they come first in everything we do. What You’ll Do As a senior professional in this field, this position will use solid knowledge and experience and contribute to the development, manufacture, and distribution of Imperative Care’s medical device products by applying Quality Engineering principles to all applicable processes and procedures in accordance with the Company’s Quality Policy and Quality Objectives. • Provide quality input to define required validations necessary to support significant process changes on commercially launched products., • Collaborate with team members to define validation requirements, specifications, testing, and component/product acceptance activities., • Analyse data by completing hypothesis, normal distribution, and process capability analysis tests intended to provide input on the quality of the product/process being evaluated/monitored., • Create and revise quality assurance procedures, as required, to maintain compliance to changing regulations and guidance documents., • Train broad audience on the use of procedures to comply with Quality Systems and Regulations., • Serve as liaison with laboratories conducting routine product testing or root cause analysis related to testing failures or deviations., • Conduct methodical root cause investigations and provide guidance to prevent recurrence., • Work with suppliers to qualify and maintain approved supplier status. May evaluate supplier notification of change and recommend necessary actions to maintain compliance., • Perform statistical analysis of manufacturing data and quality processes and creation of reports based on quality documentation., • Review DCO’s involving product or process changes to ensure consistency with company procedures and quality system compliance., • Conduct and review Risk Management assessments on product and process changes., • Conduct failure mode effect analysis on product., • Support projects (including product enhancements) in an aggressive manner consistent with corporate objectives., • Bachelor’s degree in engineering, or related discipline and a minimum of 5 years of related experience; or equivalent combination of education and work experience, • Advanced degree and experience with catheters, endovascular/neurological devices is highly desired., • Experience addressing supplier or process issues (CAPAs, NCMR/NCRs, SCARs, etc.)., • Demonstrated knowledge of quality system requirements (FDA 21 CFR Part 820, ISO 13485 or ISO 9001), risk management standards (ISO 14971) and good manufacturing practices., • Excellent communications skills (both written and verbal)., • Proven ability to provide thorough and meticulous review of documents., • Proven ability to write clear, concise, and well thought out technical documentation with focus on failure investigations and inspection procedures., • Strong ability to perform multiple tasks concurrently with accuracy. Salary Range: $120,000 – 130,000/annually Please note that the salary information is a general guideline only. Imperative Care considers factors such as scope and responsibilities of the position, candidate's work experience, education/training, key skills, and internal equity, as well as location, market and business considerations when extending an offer. The use of external recruiters/staffing agencies requires prior approval from our Human Resources Department. The Human Resources Department at Imperative Care requests that external recruiters/staffing agencies not to contact Imperative Care employees directly in an attempt to present candidates. Complying with this request will be a factor in determining future professional relationships with Imperative Care. Imperative Care will not accept unsolicited resumes from any source other than candidates themselves for either current or future positions. Submission of unsolicited resumes in advance of an agreement between the Human Resources Department and the external recruiter/staffing agency does not create any implied obligation on the part of Imperative Care. Powered by JazzHR qggOLPYgIJ

Job Description Title: Senior Product Development Engineer – VahatiCor Status: Full-time, Exempt Reports to: Sr. Director of R&D About the Role VahatiCor is looking for a hands-on Senior Product Development Engineer to join our fast-paced startup team. We are seeking an individual with a proven track record of delivering products to market and strong experience in delivery system development. This engineer will lead design and development activities, collaborate closely with cross-functional teams, and play a key role in translating clinical and business needs into engineered solutions for next-generation interventional devices. Key Responsibilities • Lead design and development of catheter-based delivery systems and related interventional products., • Drive concept development, prototyping, design iteration, and design-for-manufacturing activities., • Plan and execute bench testing, feasibility studies, characterization testing, and design verification efforts., • Collaborate with R&D, Quality, Clinical, and Manufacturing teams to ensure product requirements are met throughout product lifecycle., • Develop engineering documentation including design inputs/outputs, test protocols, reports, risk analyses, and DHF elements., • Support supplier development, material selection, and manufacturing process definition., • Provide technical guidance and mentorship to junior engineers and technicians., • Contribute to a fast-paced, hands-on laboratory and development environment. Qualifications • Bachelor’s degree in Mechanical Engineering, Biomedical Engineering, or related engineering field; advanced degree preferred., • 5+ years of product development experience in medical devices, preferably catheter or delivery system development., • Demonstrated success bringing interventional products from concept through verification/validation and into manufacturing., • Strong understanding of design controls, risk management, and regulated environment practices (FDA, ISO 13485)., • Proficiency with prototyping, test methods, CAD tools, and hands-on engineering work., • Excellent problem-solving skills and ability to work independently in a dynamic startup setting., • Strong communication and collaboration skills. Eligibility Candidates must be permanently authorized to work in the United States without the need for current or future visa sponsorship. We are currently unable to sponsor employment visas or permanent residency (PERM) applications. Location and Compensation This is an onsite role in our Santa Clara, CA, office, and is open to candidates living within a reasonable commuting distance of our office. At this time, we are not considering applicants who would need to relocate, either within or outside of California. There is no relocation package available. VahatiCor is committed to fair and equitable pay practices and may consider additional compensation elements such as bonuses, equity, and benefits as part of the total rewards package. Salary ranges are based on San Francisco Bay Area market data. Actual compensation offered may vary depending on factors such as experience, skills, qualifications, and abilities relevant to the role, as well as the geographic location of the individual hired. The anticipated salary range of this position is $132,000 - $178,000 based on San Francisco Bay Area market data. Actual compensation will vary depending on factors such as years of experience and skills. Please note that the top of the salary range is reserved for candidates who demonstrate exceptional qualifications and experience directly aligned with the requirements of the role. Most candidates should expect to receive an offer within the mid-range of the posted range, based on these considerations. Equal Opportunity Statement VahatiCor is an Equal Opportunity Employer. We celebrate diversity and are committed to creating an inclusive environment for all employees. Employment decisions are based on qualifications, merit, and business needs. We do not discriminate based on race, color, religion, sex, sexual orientation, gender identity, national origin, disability, veteran status, or any other legally protected status. Third-Party Recruiter Notice We do not accept unsolicited resumes from staffing agencies or recruiters without a signed agreement in place. Any resumes submitted without such an agreement will be considered the property of VahatiCor, and no fees will be paid if the candidate is hired. If your agency or firm would like to officially submit candidates for any of our posted roles, please email .

Job Description Role Description: As a Sr. Systems Engineer, candidate will be working on the system design, build, test and manufacture of an advanced high-productivity e-beam lithography tool. As a member of the product development team, you will work with a wide mix of experienced engineers to determine the specifications of the equipment. Your responsibilities will include design, analysis, programming, debugging, testing, and modification of controls systems. The ideal candidate is communicative, flexible, and enjoys working in a fast-paced and creative technical environment. Requirements Main skills required: Looking for are servo loop tuning / PID control and either ACS Motion and/or Beckhoff / TwinCAT programming experience. DUTIES AND RESPONSIBILITIES • Work with a team to determine system specifications., • Work with internal teams of different disciplines throughout various stages of product design and review., • Develop system controls applications for a variety of systems such as PLCs, motion control, temperature control, vacuum pumps, vacuum gauges, sensors, encoders, T/Cs, RTDs, imagers, and interferometers., • Develop electrical and control system documentation, including System Schematics, Wiring Diagrams, BOM, Control Enclosure Layout, Power and Interlock Schematics., • Equipment quality assurance and documentation during all phases of development and implementation., • 10+ years of proven experience in equipment design, automation, and integration from R&D to manufacturing., • Experience in the design of capital equipment (semiconductor tool experience preferred)., • Strong understanding of tool systems and controls, including automation, vacuum, motion control, control panel and industrial interfaces (EtherCat, serial communications, Ethernet, etc.)., • PLC programming (IEC-61131-3 / Beckhoff TwinCAT preferred) and system troubleshooting., • Motion controller tuning and programming (ACS preferred) for multi axis platforms., • Understanding of SEMI (S2, S8, S14, S22 and F47), NFPA 79 and UL standards., • Experience with supplier management and/or collaborating with remote engineering teams., • Installation and support of equipment into production., • Well organized and skilled in time management., • Excellent communication skills and positive attitude required. EDUCATION and TRAINING • BS or higher degree in mechatronics, electrical, software or other engineering fields. Benefits • 401(k), • 401(k) matching, • Dental insurance, • Health insurance, • Life insurance, • Paid time off, • Vision insurance, • Short/ Long Term Disability, • Paid Holidays (7) Including your Birthday!

Job DescriptionCompany Description Arista Networks is an industry leader in data-driven, client-to-cloud networking for large data center, campus and routing environments. What sets us apart is our relentless pursuit of innovation. We leverage the latest advancements in cloud computing, artificial intelligence, and software-defined networking to provide our clients with a competitive edge in an increasingly interconnected world. Our solutions are designed to not only meet the current demands of the digital landscape but to also anticipate and adapt to future challenges. At Arista we value the diversity of thought and perspectives that each employee brings to the table. We believe that fostering an inclusive environment, where individuals from various backgrounds and experiences feel welcome, is essential for driving creativity and innovation. Our commitment to excellence has earned us several prestigious awards, such as Best Engineering Team, Best Company for Diversity, Compensation, and Work-Life Balance. At Arista, we take pride in our track record of success and strive to maintain the highest standards of quality and performance in everything we do. Job Description Who You’ll Work With The Component Engineer - Memory Specialist ensures that all memory components (DRAM, SRAM, Flash, etc.) used in Arista products meet stringent quality, reliability, and supply assurance standards. This role involves close collaboration with Design Engineers, Supply Chain Management, and New Product Introduction (NPI) Engineers to successfully launch and sustain products throughout their lifecycle. What You’ll Do * Technical and Sourcing Support (Memory): Provide essential technical and sourcing guidance to design engineers specifically for memory components. Conduct comprehensive memory component research, working with designers, manufacturers, and the supply chain to identify components that fulfill performance, pricing, availability, and volume production requirements. * Memory Lifecycle Management: Proactively monitor, identify, and resolve memory component lifecycle issues (e.g., obsolescence, EOL). Collaborate with manufacturers, the supply chain, and design engineers to identify suitable memory substitutes and provide recommendations for both NPI and sustaining products. * Risk Assessment: Assign Agile risk ratings to Arista's memory components, considering factors such as single/multi-sourcing, lifecycle status, quality issues, and availability for volume production. * Technical Analysis (Memory): Proficiently review and compare memory component datasheets. Work collaboratively to assess the impact of voltage, timing, and interface specifications, software differences, and compatibility with leading-edge manufacturing processes. * Compliance Expertise: Possess strong insight into international and domestic agency requirements, including RoHS, REACH, Conflict Minerals, Safety, and EMI/EMC, specifically as they relate to memory components. Engage with relevant Arista teams as needed to ensure compliance. * Documentation Management: Administer Engineering Change Orders (ECOs), Manufacturing Change Orders (MCOs), and Product Change Notices (PCNs) for memory components in Agile, monitoring their progress from initiation to release. * Supplier Collaboration: Periodically engage with memory component suppliers to gain visibility into their technology roadmaps and upcoming memory solutions. Qualifications • Education: Bachelor's degree in Electrical Engineering, Materials Science, Physics, or equivalent work experience in the military or network industry with a focus on electronic manufacturing., • Technical Knowledge: Working or technical knowledge in at least four of the following areas: DRAM, SRAM, Flash Memory (NAND/NOR), Memory Controller Design, High-Speed Interconnects, Package Assembly, Component Failure Analysis, Semiconductor Manufacturing, and SMT Manufacturing., • Work Ethic: Ability to thrive in a dynamic environment. The new hire base pay for this role has a pay range of $122,000 to $170,000. Arista offers different pay ranges based on work location, so that we can offer consistent and competitive pay appropriate to the market. The actual base pay offered will be based on a wide range of factors, including skills, qualifications, relevant experience, and work location. The pay range provided reflects base pay only and in addition certain roles may also be eligible for discretionary Arista bonuses and equity. Employees in Sales roles are eligible to participate in Arista’s Sales Incentive Plan, which pays commissions calculated as a percentage of eligible sales. US-based employees are also entitled to benefits including medical, dental, vision, wellbeing, tax savings and income protection. The recruiting team can share more details during the hiring process specific to the role and location. #LI-SP1 Additional Information Arista Networks is an equal opportunity employer. Arista makes all hiring and employment-related decisions in a non-discriminatory manner without regard to race, color, religion, sex, sexual orientation, gender identity, national origin or any other factor determined to be unlawful under applicable federal, state, or law law. All your information will be kept confidential according to EEO guidelines.

Job DescriptionCompany OverviewEmbark on an enriching journey with PROCEPT BioRobotics, where our vision, mission, and values guide everything we do as a company. At PROCEPT, we put the patient first in everything we do and are committed to revolutionizing treatment for benign prostatic hyperplasia (BPH, otherwise known as prostate gland enlargement) through innovation in surgical robotics. As our company succeeds and grows, we improve the quality of life of patients, provide more effective treatment options for surgeons, uphold the trust of our shareholders. That starts with a commitment to our People with a focus on creating an evolving landscape for your career, brimming with transformative opportunities that provide continuous career growth opportunities. As PROCEPT BioRobotics continues to expand, the Design Quality Assurance group is seeking a Reliability Quality Engineer to support ongoing reliability initiatives. The Reliability Quality Engineer will collaborate with product development and sustaining teams to ensure that PROCEPT BioRobotics delivers highly reliable products through the application of reliability tools such as Weibull Analysis, Failure Mode Effects & Criticality Analysis (FMECA), Fault Tree Analysis (FTA), structured problem-solving, reliability modeling, reliability predictions, and reliability testing.What Your Day-To-Day Will Involve: • Define and execute reliability testing protocols for mechanical, electrical, environmental, and software-related systems., • Support Design Control activities, risk management files, verification and validation protocols, and design reviews., • Collaborate with cross-functional teams (R&D, Manufacturing, Supplier Quality, Regulatory, and Failure Analysis) to ensure product quality, reliability, and compliance., • Monitor field reliability metrics, complaint data, and nonconformance trends., • Understand and adhere to the PROCEPT BioRobotics EHS policy.The Qualifications We Need You to Possess, • Evaluate and demonstrate the reliability of mechanical, electrical, and electronic components within complex medical robotic systems., • Perform reliability prediction analyses using established industry standards such as MIL-HDBK-217, Telcordia, and FIDES., • Apply knowledge of ISO 13485 and 21 CFR Part 820, and remain familiar with other applicable international standards., • Define reliability requirements and develop new test specifications, methodologies, and coverage strategies to ensure the reliability of both current and next-generation products., • Plan and conduct Accelerated Life Testing (ALT) and Highly Accelerated Life Testing (HALT) to assess product design robustness., • Design and build custom test fixtures and automated setups for reliability testing at the system, subsystem, and component levels., • Maintain automated testing frameworks using Python and C++ for test execution and data analysis., • Demonstrate strong attention to detail, excellent organization, and effective communication skills, with flexibility and adaptability to take on new tasks.The Qualifications We Would Like You to Possess, • Bachelor’s degree with 2 years of relevant experience, or Master’s degree with 1 year of relevant experience in Mechanical, Biomedical, or Electrical/Electronic Engineering., • Ability to learn and apply statistical processes and techniques such as prediction and Weibull analysis., • Strong written and verbal communication skills., • ASQ CQE or CRE certification preferred., • Basic machine tool and manufacturing experience is a plus.

Job DescriptionCompany Description Our Mission At Palo Alto Networks® everything starts and ends with our mission: Being the cybersecurity partner of choice, protecting our digital way of life. Our vision is a world where each day is safer and more secure than the one before. We are a company built on the foundation of challenging and disrupting the way things are done, and we’re looking for innovators who are as committed to shaping the future of cybersecurity as we are. Who We Are We believe collaboration thrives in person. That’s why most of our teams work from the office full time, with flexibility when it’s needed. This model supports real-time problem-solving, stronger relationships, and the kind of precision that drives great outcomes. Job Description Your Career We are seeking an experienced and highly motivated Senior Component Engineer to join our exciting, fast growing company and reports to the Director of Component and Manufacturing Engineering. This experienced individual will provide component engineering support for all Palo Alto Networks hardware products. Working in a highly collaborative environment with Supply Base Managers, Hardware and Software Engineering, Technical Operations team and our suppliers, this individual will contribute to component and major sub-assembly selection and qualification for our industry leading security solutions. This role is 5 days/week in our HQ, Santa Clara, CA. Your Impact * Fast paced working environment with ever changing requirements. Strong attention to details with sense of urgency is required. Strong individual contributor who requires minimal supervision. * Strategic planning; sees the big picture. Understand implications of activities/issues on all areas of company. * Translates component knowledge into product and supplier requirements. * Utilize quality metrics in developing, monitoring and improving operational objectives. * Solid collaboration, critical thinking and problem-solving skills, specifically Kepner-Tregoe framework. * Ability to analyze and make critical decisions with minimum data. * Ensure supplier technical roadmap and capability alignment with Palo Alto Networks’ product roadmap. * Drive and lead early engagement with Engineering to deliver best solutions for PANW products. * Collaborate closely with the Supply Base Managers in selection, qualification, approvals, changes and additions to the AML. * Identify and qualify alternate component sources to minimize risk in the supply chain and to support cost reduction and quality improvements. * Monitor component quality over a broad range of technologies in manufacturing and the field; drive component manufacturers to root cause and corrective action implementation and verification. Be the technical point person for component quality/performance issues. * Review supplier Part/Product Change Notifications (PCN), End of Life notifications (EOL) and determine product impact. Qualifications Your Experience * Bachelor's degree in electrical engineering with deep understanding of digital logic fundamentals. * 10+ years progressive and proven experience in Component Engineering. Experience in Field Application Engineering is a huge plus. * Demonstrated broad technical competence in multiple technologies (ASIC, FPGA, Comm IC, Processor, SSD) with expert level experience in one or more area is required. * Proven knowledge of failure mechanisms in semiconductor and system level component interaction and assemblies over a wide range of technologies. * Demonstrated technical and operational problem solving and solution implementation skills in a complex, highly interactive environment with a proactive attitude. * Working knowledge of industry best practices for component and product level qualification and design verification testing (DVT practices, HALT, HASS, etc.). * Experience in partnering with multiple industry leading EMS and OEM/ODM providers. Additional Information The Team Our World-Wide Operations team is a team of professionals with extensive business and project management experience in the contract manufacturing industry. This team has a proven track record of success in all aspects of supply chain and project management. We’re dedicated to growing production, reducing operating costs, and improving product quality by utilizing World-class Manufacturing concepts to optimize supply chain processes and strategies. Our manufacturing team leadership establishes clear objectives, defining and implementing profit improvement and profiling inventory management, valuation, and lead-time improvement programs. If you have a passion for extensive end-to-end manufacturing and supply chain with the knowledge and experience, we want you! Compensation Disclosure The compensation offered for this position will depend on qualifications, experience, and work location. For candidates who receive an offer at the posted level, the starting base salary (for non-sales roles) or base salary + commission target (for sales/commissioned roles) is expected to be between $124000 - $201500/YR. The offered compensation may also include restricted stock units and a bonus. A description of our employee benefits may be found here. Our Commitment We’re problem solvers that take risks and challenge cybersecurity’s status quo. It’s simple: we can’t accomplish our mission without diverse teams innovating, together. We are committed to providing reasonable accommodations for all qualified individuals with a disability. If you require assistance or accommodation due to a disability or special need, please contact us at . Palo Alto Networks is an equal opportunity employer. We celebrate diversity in our workplace, and all qualified applicants will receive consideration for employment without regard to age, ancestry, color, family or medical care leave, gender identity or expression, genetic information, marital status, medical condition, national origin, physical or mental disability, political affiliation, protected veteran status, race, religion, sex (including pregnancy), sexual orientation, or other legally protected characteristics. All your information will be kept confidential according to EEO guidelines.

Job Description About Etched Etched is building the world’s first AI inference system purpose-built for transformers - delivering over 10x higher performance and dramatically lower cost and latency than a B200. With Etched ASICs, you can build products that would be impossible with GPUs, like real-time video generation models and extremely deep & parallel chain-of-thought reasoning agents. Backed by hundreds of millions from top-tier investors and staffed by leading engineers, Etched is redefining the infrastructure layer for the fastest growing industry in history. Job Summary Etched is hiring a Quality Engineer based in the US to ensure robust quality systems across our domestic contract manufacturing and integration partners. You will own quality assurance for our advanced AI hardware builds—driving inspection and test strategies, resolving systemic issues, and ensuring that every system leaving the factory meets Etched’s standards for performance and reliability. This role will collaborate closely with Manufacturing Operations, Supply Chain, and Test Engineering, serving as the bridge between Etched HQ and factory teams. It is ideal for someone who enjoys being hands-on in the factory, while also establishing the scalable quality processes needed to support high-volume production. Key Responsibilities * Lead quality assurance for US-based contract manufacturers and integrators (L6 to L10). * Establish and maintain incoming, in-process, and outgoing inspection processes to ensure compliance with Etched standards. * Partner with Test Engineering to define system-level test coverage, burn-in protocols, and reliability validation. * Drive failure analysis, root-cause investigations, and corrective/preventive actions (8D, CAPA). * Track, analyze, and report on quality metrics (yield, defect density, escapes, DPPM) to both engineering and operations stakeholders. * Participate in ECO reviews, configuration changes, and NPI build reviews to enforce quality gates. * Conduct supplier audits and ensure adherence to industry standards (ISO/AS, IPC). * Collaborate with Manufacturing Operations to scale line capability, training, and documentation. * Champion continuous improvement projects across yield, throughput, and defect reduction. You may be a good fit if you have: * 8+ years of PCBA related experience in quality engineering, supplier quality, or manufacturing quality roles * Proven track record working with Tier 1 US-based contract manufacturers and/or ODMs. * Familiarity with server assembly, burn-in, and system-level test workflows. * Strong knowledge of quality tools and methodologies (SPC, FMEA, control plans, DOE). * Excellent cross-functional communication skills; ability to drive alignment across engineering, ops, and suppliers. * Comfortable working on-site at CM factories and resolving issues in real time. Strong candidates may also have: * Background in AI ASIC or high-performance compute hardware. * Experience with L6 - L10 rack-level integration and validation. * Exposure to thermal/power stress testing and system reliability engineering. * Prior experience ramping high-complexity systems from NPI into MP. * Engineering background in electrical, mechanical, or manufacturing domains. Benefits * Full medical, dental, and vision packages, with generous premium coverage * Housing subsidy of $2,000/month for those living within walking distance of the office * Daily lunch and dinner in our office * Relocation support for those moving to San Jose (Santana Row) How we’re different Etched believes in the Bitter Lesson. We think most of the progress in the AI field has come from using more FLOPs to train and run models, and the best way to get more FLOPs is to build model-specific hardware. Larger and larger training runs encourage companies to consolidate around fewer model architectures, which creates a market for single-model ASICs. We are a fully in-person team in San Jose (Santana Row), and greatly value engineering skills. We do not have boundaries between engineering and research, and we expect all of our technical staff to contribute to both as needed.

Job Description Position Description: Mixed signal IC Staff design engineer Regular Full-time Location: Milpitas, CA Principle Duties and Responsibilities: * Design, simulate and verify analog and digital circuit for ultra low jitter PLL, PFD Link, digital filter, Fraction N divider, FOD and high- performance output buffer using deep submicron CMOS process technology. * Understand design specifications and product architecture, create and perform top level simulations with appropriate modelling. * Supervise physical layout work. * Work with test engineering and product engineering for product characterization and post silicon verification, provide occasional customer support. * Create and maintain documentations for the related projects. Requirements: * MSEE/PhD with 3+ years of related industrial experience or BSEE with 5+ years of experience. * Solid knowledge in high performance CMOS mixed signal circuit design. * Has experiences in standard output buffer of LVPECL, LVDS, HCSL, CMOS design. * Has experiences of Fraction Output Divider is a plus. * Hands on in Cadence tool set, Synopsys tool set, Spectre & Hspice simulation tool, Matlab, and layout tools. * Ability to work as a team and able to work across other groups. Company DescriptionDiodes Incorporated (Nasdaq: DIOD), a Standard and Poor’sSmallCap 600 and Russell 3000 Index company, is a leading global manufacturer and supplier of high-quality application specific standard products within the broad discrete, logic, and analog semiconductor markets. Diodes serves the consumer electronics, computing, communications, industrial, and automotive markets. We offer a competitive benefits package to include medical, dental, vision, FSA, 401k with company match, company paid Short Term and Long Term disability and standard life insurance policy. We also provide paid time off, employee wellness program and an onsite gym.Diodes Incorporated (Nasdaq: DIOD), a Standard and Poor’sSmallCap 600 and Russell 3000 Index company, is a leading global manufacturer and supplier of high-quality application specific standard products within the broad discrete, logic, and analog semiconductor markets. Diodes serves the consumer electronics, computing, communications, industrial, and automotive markets. \r\n\r\nWe offer a competitive benefits package to include medical, dental, vision, FSA, 401k with company match, company paid Short Term and Long Term disability and standard life insurance policy. We also provide paid time off, employee wellness program and an onsite gym.

Electrical Engineering or equivalent experience. Type: Fulltime and Hybrid work schedule Location: San Jose, CA Salary Range: San Jose, CA Base $150K-190K (DOE) Submit resume to jobs@OSIengineering. A leading chip and silicon IP provider is seeking a Principal Test Engineer to join the Operations te

We specialize in delivering world-class Digital Product Engineering, Data Management and Analytics, and Staffing Solutions services to Fortune companies, SMBs, ISVs, and fast-growing startups.

As part of the Santa Clara, CA team, this position supports and works closely with Manufacturing Operations, Facilities Management, Manufacturing Planning, Quality Assurance, Corporate Procurement, and Finance. Communicate any raw material shortages or quality issues to appropriate departments, brin

A leading medical technology company is seeking a Material Handler Lead in Sunnyvale, CA.This role involves overseeing warehouse operations, managing inventory, and supporting cross-functional teams.The ideal candidate has substantial warehouse experience, technical skills, and a high school diploma

Tesla is looking for an individual experienced with quality programs and technical quality processes to contribute to the team managing the quality program at the Cell Manufacturing facility. Work closely with manufacturing, process, and quality teams to establish processes and procedures that will

Degree in a quantitative or analytical discipline, such as Industrial Engineering, IT, economics or a related field. Collaborate with the Solution Engineer and PA Manager to define the structure and scope of each project, setting clear evaluation criteria and success benchmarks. Assign projects, ens

Collaborate with commodity management and engineering to identify alternate sources of supply, safety stock, demand offsets and other means to stabilize supply.

As a team of remarkably diverse engineers, we recognize that what we are really engineering is a brighter future for us all. Hands-on experience debugging image quality issues, finding root causes, and familiarity with image quality artifacts. POSITION: Camera Validation Engineer.

The Quality Engineer plays a vital role in ensuring the organization's ongoing compliance with established quality assurance standards for manufacturing and production. The Quality Engineer collaborates closely with cross-functional teams to develop and implement effective solutions, ensuring robust

Job Description: Our client, an on-demand, autonomous ride-hailing company, is seeking a Technical Program Manager within the Supplier Quality Team to drive supplier quality metrics, support Advanced Product Quality Planning (APQP) and Production Part Approval Process (PPAP) readiness. In this role

Supermicro is looking for an experienced Production Quality Engineer to serve as the Component technology enabler for Company. Take ownership provide feedback and take initiative to drive to improve supplier quality management. Manage our quality control procedure to improve company's product qualit

Manages contingent worker project/task assignments and ensures work product quality.

The Quality Control Specialist will be responsible for supporting aspects of the quality programs for the Concentrate Plant. Establish product quality documentation system by writing and updating quality assurance procedures. Maintain product quality by enforcing quality assurance policies and proce

This role focuses on ensuring linguistic quality, brand consistency, and accurate content localization across digital assets. Collaborate with cross-functional teams to maintain quality across multiple languages and assets. A proactive, quality-driven mindset with a focus on accuracy and brand align

The Quality Engineer supports the Quality Manager in ensuring that all aerospace windshields, canopies, and transparency components meet internal, customer, and regulatory requirements. Experience in aerospace, defense, or precision manufacturing quality engineering. Collaborate with engineering, ma

STLC, SDLC, and defect lifecycle.Camera Testing experience is mandatory.Good communication and problem-solving skills.

Masters Degree in Chemical Engineering, Materials Science and Engineering, Mechanical Engineering or related field. If you are a highly motivated and creative individual with a passion for sustainability and a proven track record of success in electrochemical engineering, we would love to hear from

In this role, you will collaborate with clients test engineering teams to design test plans, develop test cases, execute manual tests, and identify/report defects. The ideal candidate should have strong analytical skills, excellent communication abilities, and a passion for delivering high-quality p

Bachelors or Masters degree in computer engineering/Electrical Engineering. We are seeking a skilled FPGA Design and FPGA-Based Prototyping Platform Validation and Bring-Up Engineer to join our cutting-edge engineering team. This role requires a proactive engineer with a background in FPGA-based des

Troubleshoot automation and data sync issues in collaboration with engineering and capability teams.

Business Analyst - Supply Chain Ops.Santa Clara, CA - 100% Onsite 12 Months Contract (With Possibility Of Extension) Notes: Should have worked in SAP Supply Chain engagements as a Business Analyst or have Consulting experience to perform the Business Analyst role.You will be a key member of the Supp

From early R&D, through complex regulatory approvals and into production, our global laboratory network of scientists, engineers, and technologists support customers to achieve assurance over product quality, sustainable outcomes, and market access. Liaise with customers, other departments, Test

Business Analyst (Supply Chain).Six to eight months total hybrid.Two days onsite and travel once a month to Distribution Center in Los Angeles.Advising on material-handling equipment.Working with the business team to gather requirements.

Primary Skills: Supply Chain Planning (Expert), Software Implementation (Advanced), Manufacturing (Advanced), Process Improvement (Advanced), Data Analysis (Intermediate).Contract Type: W2 Only Duration: 7+ Months Location: Sunnyvale, CA (Hybrid) Pay Range: $65 - $70 per hour on W2.Job Summary: We a