Trabajos sustainability engineer en Buffalo, New YorkCrear alertas

Job DescriptionCompany Description With more than 100 years of experience, Sika is a worldwide innovation and sustainability leader in the development and production of systems and products for commercial and residential construction, as well as the transportation, marine, automotive, and renewable energy manufacturing industries. Sika is a specialty chemicals company with a globally leading position in the development and production of systems and products for bonding, sealing, damping, reinforcing, and protection in the building sector and industry. Sika has subsidiaries in 103 countries around the world, produces in over 400 factories, and develops innovative technologies for customers worldwide. In doing so, it plays a crucial role in enabling the transformation of the construction and transportation industries toward greater environmental compatibility. Approximately 33,000 employees generated CHF 11.20 billion in sales in 2025. Job Description This is a night shift position; 4-10 hour shifts Monday-Thursday. Work hours are typically 5:30pm - 4:00am. Watson Bowman Acme, a Sika company, is a manufacturer and supplier of expansion joint solutions for the transportation sector, including bridge and highway fabrication, preservation, and tunnels. This position is responsible for the operation of all fabrication equipment associated with the manufacture and assembly of metallic products supplied to the construction industry. More specifically, this position will be responsible for operating machines such as machine center helper, saw, ironworker, bender, drill press, punch, shot blaster, vulcanizing equipment, and a variety of portable hand tools. Attention to safety and quality is essential to this position, as well as the skills necessary to assemble simple expansion joints. Salary Range: $27 - $31 an hour based on education, experience, and qualifications of the applicant. Qualifications • High school diploma or equivalency required, additional course work with emphasis on machining processes and programming preferred., • Previous relevant experience in an industrial fabrication shop preferred., • Ability to read and understand shop drawings and other written instructions., • Ability to use hand tools and all equipment in assigned area to form, machine, and blast in the process to join components together into sub-assemblies and assemble into finished engineer-to-order products., • Ability to maintain productivity, accurately check quality, and follow pre-established procedures and guidelines from start to finish., • Comply with all safety regulations, including Safe Work Permits, training requirements, and use of safety equipment., • Must be able to lift and manage material of up to 50 pounds unassisted; walk or stand for long periods of time; bend, stoop, or kneel if required; wear all required PPE. Additional Information • 401k with Generous Company Match, • Bonuses, • Medical, Dental, and Vision Benefits, • Paid Parental Leave, • Life Insurance, • Disability Insurance, • Paid time off, paid holidays, • Floating holidays + Paid Volunteer Time, • Wellness/Fitness Reimbursements, • Education Assistance, • Professional Development Opportunities, • Employee Referral Program & More! Sika Corporation is committed to a work environment that supports, inspires, and respects all individuals that apply. As an equal opportunity employer Sika will consider all qualified applicants without discrimination on the basis of race, color, religion, sex, pregnancy, sexual orientation, gender identity, age, disability, national or ethnic origin, or other protected characteristics. We offer competitive salaries, aligned with local market benchmarks and the specific scope and responsibilities of each role. Compensation is determined based skills relevant to the position, education and/or training. We are committed to fair and equitable pay practices in accordance with applicable laws and regulations.

Job DescriptionJob Requirements The Manufacturing Engineer is responsible for for leading continuous improvement initiatives, developing and documenting build procedures, managing capital equipment and tooling, driving operational efficiency, managing various projects, and overseeing the testing processes to enhance manufacturing operations at our Stark Compression facility in Tonawanda, NY. Work Experience • Bachelor's degree in Mechanical or equivalent experience., • A minimum of 2 years of manufacturing engineering experience. 4 years preferred., • Knowledge of welding and manufacturing processes, equipment, and tooling., • Strong project management and problem-solving skills., • Ability to work collaboratively in cross-functional teams., • Proficiency in CAD and other relevant software tools., • Strong communication and customer service skills required., • Ability to adapt and be flexible in a changing environment., • Ability to multi-task, work under pressure and meet deadlines required., • Must be able to deal with a large volume of work in a fast-paced, time-sensitive environment. Benefits Advance your career with Stark Tech, a leader in facilities and energy solutions. We specialize in integrating systems, providing energy-efficient equipment and services, and supporting sustainability through innovative technologies like renewable natural gas conversion and energy storage solutions. At Stark Tech, we prioritize employee well-being and offer comprehensive benefits including paid time off, 401(k) with employer match, medical coverage, wellness programs, and career development opportunities. Join our fast-growing, customer-focused organization where your skills and dedication will be valued and rewarded with competitive pay and a positive work environment.

Job Description At C&S Companies, we believe work environment, culture, and the opportunity to learn and grow are key elements when considering a new job. We are just the right size to provide the resources and support you need without the burdensome bureaucracy of a large corporate environment. To that end, we foster a team-friendly and supportive workplace; collaborative and employee-focused with an emphasis on quality, integrity, trust, fun, and accountability. Belonging is a top priority at C&S. We promote personal and professional growth by cultivating and sustaining a safe, inclusive atmosphere where everyone feels a sense of belonging. By encouraging employees to bring their whole selves to work, we create a diverse and equitable environment where all our voices are heard. Lead Projects. Mentor Talent. Build the Future. Are you a skilled transportation engineer with a passion for delivering high-quality infrastructure solutions? We’re seeking a Senior Project Engineer to join our Highway Department and take a leading role in the design and execution of critical transportation projects across New York State. In this role, you’ll manage projects through the full lifecycle—from planning and design to construction support—while mentoring junior engineers and fostering strong client relationships. You’ll bring deep technical expertise in highway design modeling and a collaborative mindset to help deliver innovative, sustainable, and cost-effective solutions. You’ll also play a key role in leading and expanding our premier transportation practice in Western New York. We’re already one of the region’s largest providers of transportation services —working on local projects in every county and major city in the Buffalo area. We also are completing significant projects with NYSDOT, the NYS Thruway Authority and GBNRTC. No other firm matches our regional presence or the scale of opportunity we offer our team. With this momentum driving rapid growth, we’re looking for a leader ready to make an impact. In this role, you’ll have the chance to shape the future of our department, influence major infrastructure projects, and grow your career with clear pathways for advancement. You’ll be supported by a collaborative team, high visibility, and the resources to take your work — and your career — to the next level. Position Responsibilities • Project Leadership: Oversee the entire project lifecycle, from initial concept development through construction and closeout. Provide technical leadership and ensure quality and efficiency at every stage., • Design Expertise: Apply advanced knowledge in transportation design to develop creative, efficient solutions for roadway and infrastructure projects. Prepare design reports, plans, specifications, and bid documents., • Team Development: Mentor and support junior engineers, sharing technical knowledge and project management best practices. Foster a collaborative, growth-oriented team culture., • Client Collaboration: Build and maintain strong relationships with clients. Understand their goals and expectations to deliver solutions that exceed requirements and build long-term trust. Skills, Education & Experience • Bachelor’s degree in Civil Engineering or a related field., • Licensed Professional Engineer (PE) in New York State, • Minimum 8 years of experience in transportation design, with a strong focus on NYSDOT/Federal Aid projects, • Proficiency in MicroStation/OpenRoads and/or AutoCAD/Civil 3D., • Strong communication and interpersonal skills, with the ability to lead teams and collaborate effectively with clients and stakeholders Compensation and Benefits: • Estimated Salary Range: $97,760 - $131,040/year*, • Benefits: Comprehensive health, dental, and vision insurance, life and disability coverage, accident and critical illness insurance, flexible spending accounts, 401(k) plan with company match, generous paid time off (PTO), flexible/hybrid scheduling, tuition reimbursement, employee assistance program (EAP), wellness programs, parental leave, professional development opportunities, employee discounts, and referral program. For more detailed information, please visit C&S Comprehensive Benefits. *Actual compensation may vary based on related work experience, geographical location and market conditions, education/training, certifications, and other credentials, as well as applicable knowledge and skills. WHO WE ARE: At C&S Companies, we believe that a great job is about more than just the work—it’s about the people, the culture, and the opportunity to grow. We foster a family-friendly, collaborative, and employee-focused workplace grounded in quality, integrity, trust, fun, and accountability. Belonging is a top priority: we are committed to cultivating and sustaining a safe, inclusive atmosphere where everyone feels valued, supported, and empowered to thrive. C&S is a national planning, design, and construction firm with more than 600 employees and growing. For over 50 years, we’ve delivered critical infrastructure services across aviation, transportation, civil/site infrastructure, planning, sustainability, construction and program management, energy, environmental, facilities, and architecture. We have offices throughout New York State and in California, Florida, Michigan, Arizona, Pennsylvania, Ohio, Washington, and Kentucky.

Job DescriptionDescription: Precast Design Engineer - Civil/Structural Join Our Team as a Precast Design Engineer – Innovate and Lead in Concrete Design Are you ready to take your engineering career to new heights? Fisher Associates is seeking a skilled Precast Design Engineer to join our dynamic team, where your expertise in designing precast concrete components will make an impact on diverse civil and structural projects. Join Fisher Associates and bring your talents to a team that values innovation, collaboration, and your unique contributions. Apply now to advance your career and play a key role in impactful projects within a supportive and dynamic environment! About Fisher Associates At Fisher Associates, we are a multidisciplinary design services firm with nine locations nationwide. Our services span civil/site engineering, transportation engineering, electrical engineering, landscape architecture, architecture, planning, environmental services, land surveying, GIS, construction inspection, precast, and construction engineering, each offering opportunities to shape communities and improve lives. What You’ll Do as a Precast Design Engineer • Lead and execute precast engineering and design tasks efficiently., • Collaborate with project teams to deliver structurally sound, cost-effective, and visually appealing precast concrete designs., • Perform and review structural analysis and calculations to ensure safety under various loads and conditions., • Select materials and components for precast concrete production that meet strength, durability, and sustainability standards., • Create accurate drawings, plans, and specifications for precast projects aligned with industry design standards., • Support cost estimation for materials, • Support Project Managers and Designers throughout the project lifecycle., • Promote, utilize and support QA/QC processes to guarantee quality deliverables., • Guide and mentor junior staff.Requirements: What You Bring, Your Expertise as a Precast Design Engineer • B.S. degree in Civil Engineering or a related field, Master’s preferred, • 5 -10 years minimum Precast concrete design engineering experience, • Experience in precast concrete design engineering for transportation infrastructure and underground structures (utility vaults, manholes, drainage structures and pump stations) preferred, • Familiarity with ACI 318, ACI 350, ASCE-7, AASHTO, • Familiarity with IBC codes a plus, • Professional Engineering License (PE) preferred or ability to obtain it, • Proficiency in AutoCAD & RISA 3D, • Professional performance aligned with Fisher’s Mission, Vision, and Core Values, • Dedicated to fostering trusting relationships through collaboration, integrity, respect, and active listening, • Proven ability to deliver quality work through critical thinking, problem-solving, and sound judgment, • Proactively own projects, prioritize effectively, and meet deadlines in a fast-paced, growth environment., • Superior organizational and planning skills with keen attention to detail, • Curious and improvement-minded, embracing feedback and continuously seeking better solutions. Why You’ll Love Working at Fisher • You are empowered to achieve exceptional results through collaboration and leadership of multidisciplinary design teams., • Your voice matters in our inclusive culture, where accessible leadership welcomes ideas and feedback., • Your growth is our priority, supported by clear career paths and leadership opportunities., • You thrive in a culture that keeps work engaging and fosters a relaxed, easy-going atmosphere., • Your journey is supported by a team-driven environment that promotes mentorship and ongoing learning., • Your success is supported by a flexible work environment so you can thrive professionally and personally. What We Offer Your Impact Matters, Your Career Thrives. Create meaningful community impact through engaging precast engineering projects while advancing your career. We offer competitive salaries and benefits, including: • Medical, Dental & Vision Insurance, • 401(k) Plan, • Company-paid Life and Disability Insurance, • Hybrid Work Schedule, • Generous PTO and Paid Holidays, • Strong Work-life Balance, • Shareholders Program, • Professional Development Opportunities and Reimbursement, • Supplemental Benefits Designed for Total Well-being and Financial Security, • Engage with a variety of employee groups focused on community, inclusion, and employee voice. Salary Range $83,000-$105,000 Actual compensation may vary based on relevant experience, qualifications/education, and other factors. The salary range is not necessarily reflective of the actual total compensation that may be earned nor promise any specific pay for any specific employee. Salary range excludes monetary value of benefits. Equal Employment Opportunity Statement Fisher Associates is committed to fostering a diverse and inclusive workplace where all individuals are respected, valued, and empowered to thrive. We do not discriminate on the basis of any protected status under federal, state, or local law. #LI-Hybrid

Job DescriptionJob Requirements The Sales Engineer II is responsible to engage an assigned list of existing and prospective accounts seeking to learn how Stark Equipment's Critical Power Division can help align product and service offerings with current and future facility infrastructure needs. This position will focus on providing design assistance, configure product offerings and help set pricing strategies for power distribution equipment on new applications and existing facility critical power equipment. Successful performance will be directly related to achieving revenue & gross profit targets & account management attainment benchmarks. Work Experience • At least 5 years of industry (power distribution) experience required., • Technical understanding of Electrical Power systems required., • Capability to mentor and foster a healthy team environment., • Ability to multi-task, work under pressure and meet deadlines required., • Must be able to deal with a large volume of work in a fast-paced, time-sensitive environment., • Ability to drive individual sales success., • In-depth knowledge of the market., • Strong account management capabilities. Benefits Advance your career with Stark Tech, a leader in facilities and energy solutions. We specialize in integrating systems, providing energy-efficient equipment and services, and supporting sustainability through innovative technologies like renewable natural gas conversion and energy storage solutions. At Stark Tech, we prioritize employee well-being and offer comprehensive benefits including paid time off, 401(k) with employer match, medical coverage, wellness programs, and career development opportunities. Join our fast-growing, customer-focused organization where your skills and dedication will be valued and rewarded with competitive pay and a positive work environment.

Job DescriptionJob Requirements We are seeking a skilled Integration Specialist to implement, configure, commission, and maintain Schneider Electric Power Monitoring Expert (PME) systems, including associated metering hardware, communications infrastructure, and server-based software components. This individual will ensure reliable data acquisition, system integration, and accurate reporting across customer power distribution systems. The Integration Specialist will be responsible for configuring meters and communication networks (Modbus TCP/IP, RS-485, Ethernet), validating data integrity, and troubleshooting system performance issues. This role includes hands-on inspection, troubleshooting and commissioning of power meters and related equipment in low-, medium-, and high-voltage environments. The candidate must be comfortable interpreting electrical one-lines, control schematics, wiring diagrams, and technical documentation. In addition to PME responsibilities, this position will support integration with the Stark Optelligent platform, our building analytics, and continuous commissioning solution. This includes validating data streams from BMS and power monitoring systems, assisting with analytics deployment, supporting data mapping and tagging, and collaborating with controls teams to optimize building performance through actionable insights, and diagnostics. Success in this role requires strong technical troubleshooting skills, system-level thinking, and the ability to work both independently in the field and collaboratively with engineering, programming, and service teams. Work Experience Associate degree in Electrical Engineering Technology, Electronics, or related field or equivalent military or technical training. 24 years of experience as a Field Service Engineer, Controls Technician, or Integration Specialist working with electrical, electro-mechanical, or electronic systems preferred. Demonstrated competence using diagnostic tools including digital multimeters, oscilloscopes, AC clamp meters, load banks, and other electrical test equipment. Working knowledge ofswitchgear and power distribution systems. Experience configuring communication networks and industrial protocols (Modbus RTU/TCP preferred). Ability to write technical reports, procedures, and customer-facing documentation, and effectively communicate technical information to clients. Proficiency with Microsoft Office and mobile field technology (iPads, smartphones, laptops). Preferred Qualifications (Not Required) Experience with Schneider Electric Power Monitoring Expert (PME). Familiarity with building automation systems (BMS) and integration of power data into analytics platforms. Experience in emergency power generation and distribution, including switchgear and generator control applications. HMI/SCADA programming and troubleshooting experience, including graphics development, reporting, and alarm configuration. Experience with building analytics, continuous commissioning, or fault detection and diagnostics platforms. Benefits Advance your career with Stark Tech, a leader in facilities and energy solutions. We specialize in integrating systems, providing energy-efficient equipment and services, and supporting sustainability through innovative technologies like renewable natural gas conversion and energy storage solutions. At Stark Tech, we prioritize employee well-being and offer comprehensive benefits including paid time off, 401(k) with employer match, medical coverage, wellness programs, and career development opportunities. Join our fast-growing, customer-focused organization where your skills and dedication will be valued and rewarded with competitive pay and a positive work environment. Company DescriptionAt Stark Tech, we build careers — not just fill positions. Guided by our mission, vision, and values, we focus on hiring candidates who are aligned with our culture and committed to long-term growth. We invest in our people through meaningful training, active engagement, and intentional communication to ensure every team member has the opportunity to succeed. We’re truly built differently. We’re defined by a culture that puts customers first, challenges the status quo, and takes pride in doing the right thing—every project, every partnership, every day. Across North America, we partner with our clients in advanced building and power solutions. We work on some of the most exciting and complex environments imaginable. From K–12 schools and healthcare facilities to the Space Coast, professional sports stadiums, and world-class arenas, our teams design and deliver solutions that matter.At Stark Tech, we build careers — not just fill positions. Guided by our mission, vision, and values, we focus on hiring candidates who are aligned with our culture and committed to long-term growth. We invest in our people through meaningful training, active engagement, and intentional communication to ensure every team member has the opportunity to succeed. We’re truly built differently. We’re defined by a culture that puts customers first, challenges the status quo, and takes pride in doing the right thing—every project, every partnership, every day. Across North America, we partner with our clients in advanced building and power solutions. We work on some of the most exciting and complex environments imaginable. From K–12 schools and healthcare facilities to the Space Coast, professional sports stadiums, and world-class arenas, our teams design and deliver solutions that matter.

Job Description STRUCTURAL BUILDING SYSTEMS ENGINEER (BSE) I Why This Role Matters As a Building Systems Engineer, you are responsible for the design of building systems for projects across our practice areas, elevating their capabilities and creating a more sustainable world in the process. You would be part of a team whose structural engineering services are grounded in the use of advanced engineering techniques, diverse material selection and sustainability measures. What You Will Do • Asses how gravity, wind and seismic loads interact, ensuring designs meet or exceed building codes and safety standards., • Research and apply current technology and stay abreast of new and upcoming technologies, • Design and analyze complex structural systems, from multi-story buildings and infrastructure projects to industrial systems., • Execute detailed structural drawings and design calculations, • Develop and prepare project specifications for structural building projects., • Oversee the construction phase of the project, reviewing submittals, inspecting work, and resolving field issues., • Supervise junior engineers assist in their growth and development. What You Bring • Bachelor’s degree in Civil Engineering or a related field, • A minimum of 4 years of structural engineering experience, • AutoCAD/Revit experience, • Design program experience such as Enercalc, RISA, Bentley Structural System or equivalent required, • Professional Licensure, • Expertise in load path analysis, gravity and lateral load design with a proficiency in concrete, steel, and composite materials, plus foundation design for various project types., • An ability to perform difficult technical computations and consolidate acquired data, • Ability to interact effectively across organizational boundaries to achieve goals and meet deadlines, • In-depth knowledge of IBC, ASCE-7, ACI 318, AISC 360, and relevant local or national codes., • Proficient in utilizing Microsoft Office tools, • Effective leadership, and strong verbal, written, and interpersonal skills, • Engineering, analytical, and technical writing skills with attention to detail, • An understanding of construction plans/specifications What We Offer: To regular full-time and part-time employees who regularly work 30 or more hours per week • Healthcare for you and your family: Medical, Dental& Vision insurance. Single HDHP Medical plan with 100% paid premium, • Health Savings Account (HSA) with employer match, • Medical and Dependent Care Flexible Spending Accounts, • Long-Term Disability Insurance Company/team member sharing, • FREE Life Insurance and AD+D Insurance + Voluntary Life Insurance for you and your family, • FREE Short-Term and Long-Term Disability Insurance, • PTO + Sick Time + 8 Holidays a year, • Retirement Savings Plan - Contribution from CPL to grow your retirement funds, • Tuition Assistance: You may be eligible for continuing education assistance, • Student Loan Assistance Program: CPL will contribute up to a maximum of $100 a month for 5 years ($6,000 total) towards student loan debt, • Internal Mobility & Career Advancement, • Licensure Assistance What Does It Look Like Working Here? We believe that building a strong community is about establishing a prevailing sense of fellowship among our team members, friends, and neighbors. • Collaboration – working with others towards the best solution, placing great emphasis on the collective wisdom of our internal teams., • Family – celebrating others’ successes, genuinely caring about the happiness and well-being of our team members and recognizing their own families as extensions of the CPL family., • Fun – not taking oneself too seriously, fully understanding that fun at work is conducive to productivity., • Inspiration – contributing to an uplifting workplace that facilitates growth a positive, upbeat attitude., • Integrity – doing what is ethically right and providing reliable follow-through on commitments., • Ingenuity – seeking new opportunities and consistently identifying unexpected and practical ways to solve problems. The rate for this position generally ranges between $81-$102K annually. This range is a good faith estimate provided pursuant to the New York Pay Transparency Law. It is based on what a successful New York applicant might be paid and assumes that the successful candidate will be in New York or perform the position from New York. Similar positions located outside of New York will not necessarily receive the same compensation. Actual pay rates may vary from the range, as permitted by New York Equal Pay Transparency Law. Compensation offers will be based on various factors, including operational needs, individual education, qualifications and experience, work location and comparison to employees already in the role, as well as other considerations permitted by law. A potential new employee's pay history will not be used in compensation decisions. CPL does not accept unsolicited resumes from recruiting professionals or agencies, nor do we accept resumes from any source that does not reference a specific, open position. CPL will not be responsible for any fees arising from the use of resumes submitted by recruiting professionals or agencies that do not have a current placement fee agreement with CPL. All initial communication with recruiting professionals or agencies must go through our Talent Acquisition Team. CPL is an Equal Opportunity Employer, and as such affirms the right of every person to participate in all aspects of employment without regard to gender, race, color, religion, national origin, ancestry, age, marital status, sexual orientation, pregnancy, disability, citizenship, military or veteran status, gender expression and/or identity, or any other status or characteristic protected by federal, state, or local law.

Job DescriptionDescription At C&S Companies, we believe work environment, culture, and the opportunity to learn and grow are key elements when considering a new job. We are just the right size to provide the resources and support you need without the burdensome bureaucracy of a large corporate environment. To that end, we foster a family-friendly and supportive workplace; collaborative and employee-focused with an emphasis on quality, integrity, trust, fun, and accountability. Belonging is a top priority at C&S. We promote personal and professional growth by cultivating and sustaining a safe, inclusive atmosphere where everyone feels a sense of belonging. By encouraging employees to bring their whole selves to work, we create a diverse and equitable environment where all our voices are heard. Position Overview C&S Companies is seeking an experienced Senior Project Engineer in the Buffalo, Rochester, or Syracuse, NY offices to support our growing railroad practice. You will be part of a team working on projects from conception through final design and construction. This position is diversified with opportunities to work in the office on the engineering design of railroad infrastructure and in the field with construction inspection/administration. You will work on a variety of designs and projects with the opportunity to learn and grow throughout your career at C&S. Position Responsibilities • Ability to work with internal and external staff on an individual and team basis., • Ability to motivate and mentor junior staff., • Strong written and oral communication, organizational, and interpersonal skills., • Ability to manage all aspects of smaller projects or assigned tasks as part of a larger overall project., • Work with team in Client relationship management and obtaining additional business opportunities., • Ability to challenge oneself and broaden knowledge base., • Willingness to be proactive and anticipate., • May require occasional travel away from the office, estimated 15%., • Utilize safe work practices in accordance with federal, state, local, and company standards., • Communicate incidents, accidents, near misses, potential hazards, and unsafe working conditions to a supervisor or the Health and Safety Department as soon as identified. Skills/Education/Experience • B.S. in Engineering field, M.S. in related Engineering field a plus., • Registration as a Professional Engineer (P.E.)., • 10 or more years of railroad related design and construction experience., • Experience with preparation of contract documents from bidding though design and award., • Experience with AREMA Manual for Railway Engineering., • Experienced with Bentley MicroStation/InRoads and/or AutoDesk AutoCad/Civil 3D. Experience with Bentley OpenRoads is a plus. Estimated Compensation Range: $85,000 – $110,000/year* Learn about our comprehensive Benefits *Actual compensation may vary based on related work experience, geographical location and market conditions, education/training, certifications, and other credentials, as well as applicable knowledge and skills. As an employee working on railroad related assignments with the need to occasionally visit railroad properties, you will be enrolled in our drug and alcohol testing program as mandated by the Federal Railroad Administration’s (FRA) 49 CFR 219 Drug and Alcohol Testing Requirements Program. A Candidate’s employment is contingent upon successful results of the test which will be covered and administered by C&S’s provider. WHO WE ARE: C&S Companies is a national planning, design, and construction firm with more than 600 employees and growing. For more than 50 years we have been delivering critical infrastructure design, planning and construction services in aviation, civil/site infrastructure, construction and program management, construction/design-build, energy, environmental, facilities, architecture, planning, sustainability, and transportation. We have offices throughout New York State, California, Florida, Michigan, Arizona, Pennsylvania, Ohio, Washington, and Kentucky. Equal Opportunity Employer/Protected Veterans/Individuals with Disabilities This employer is required to notify all applicants of their rights pursuant to federal employment laws. For further information, please review the Know Your Rights notice from the Department of Labor.

Job Description At C&S Companies, we believe work environment, culture, and the opportunity to learn and grow are key elements when considering a new job. We are just the right size to provide the resources and support you need without the burdensome bureaucracy of a large corporate environment. To that end, we foster a family-friendly and supportive workplace; collaborative and employee-focused with an emphasis on quality, integrity, trust, fun, and accountability. We promote personal and professional growth by cultivating and sustaining a safe, inclusive atmosphere where everyone feels a sense of belonging. By encouraging employees to bring their whole selves to work, we create a diverse and equitable environment where all our voices are heard. Are you a skilled electrical engineer with a passion for delivering high-quality infrastructure solutions? We’re seeking a Senior Project Engineer to join our Northeast Electrical Engineering team and take a leading role in the design and execution of critical facilities and infrastructure projects throughout the Northeast. In this role, you’ll lead projects through the full lifecycle—from planning and design to construction support—while mentoring junior engineers and fostering strong client relationships. You’ll bring deep technical expertise in electrical engineering design and a collaborative mindset to help deliver innovative, sustainable, and cost-effective solutions. With the opportunity to work on transformative projects, our team is growing rapidly—and so are the opportunities. You’ll step into a role with clear pathways for advancement, the chance to shape the future of our team, and the support, visibility, and resources to take your career wherever you want it to go. Position Responsibilities • Project Leadership: Oversee the entire project lifecycle, from initial concept development through construction and closeout. Provide technical leadership and ensure quality and efficiency at every stage., • Design Expertise: Apply advanced knowledge in transportation design to develop creative, efficient solutions for roadway and infrastructure projects. Prepare design reports, plans, specifications, and bid documents., • Team Development: Mentor and support junior engineers, sharing technical knowledge and project management best practices. Foster a collaborative, growth-oriented team culture., • Client Collaboration: Build and maintain strong relationships with clients. Understand their goals and expectations to deliver solutions that exceed requirements and build long-term trust. Skills, Education & Experience • Bachelor’s of Science or Technology degree in electrical engineering., • Licensed Professional Engineer (PE) in New York State., • Minimum 8 years of experience in electrical engineering design, with a strong focus on Public and Private facilities infrastructure projects., • Proficiency in AutoCAD and Revit., • Experience with Power Systems Analysis, including Short Circuit, Coordination and Arc Flash analysis., • Proficiency with the National Electric Code., • Experience with the layout and design of medium and low voltage distribution systems., • Experience with the layout and design of lighting systems and controls., • Strong communication and interpersonal skills, with the ability to lead teams and collaborate effectively with clients and stakeholders Compensation and Benefits: • Estimated Salary Range: $95,472 - $130,640/year* *Actual compensation may vary based on related work experience, geographical location and market conditions, education/training, certifications, and other credentials, as well as applicable knowledge and skills. Learn about our comprehensive Benefits WHO WE ARE: C&S Companies is a national planning, design, and construction firm with more than 600 employees and growing. For more than 50 years we have been delivering critical infrastructure design, planning and construction services in aviation, civil/site infrastructure, construction and program management, construction/design-build, energy, environmental, facilities, architecture, planning, sustainability, and transportation. We have offices throughout New York State, California, Florida, Michigan, Arizona, Pennsylvania, Ohio, Washington, and Kentucky.

Job DescriptionDescription Challenging Bridge Projects. Grow your Career. Build the Future. Are you a skilled bridge engineer with a passion for delivering high-quality infrastructure solutions? We’re seeking a Bridge Engineer to join our Western New York Transportation Department and help us deliver some of the largest and most complicated infrastructure projects in Upstate New York. Our Western New York Bridge team is expanding, and we’re excited to offer you the opportunity to be part of the largest bridge program in our team's history. With active projects in nearly every county across the region, you'll play a key role in shaping critical infrastructure. This unprecedented workload not only brings meaningful technical challenges to keep you engaged and learning, but also opens the door to unlimited career growth. If you're looking to make a real impact while advancing your professional journey, there's never been a better time to join us. In this role, you’ll support bridge engineering projects from initial planning and design through construction support. Working under the guidance of senior engineers, you’ll contribute to structural analyses, prepare design documents, and assist with field inspections. You’ll bring a strong foundation in civil or structural engineering, a willingness to learn, and a collaborative mindset to help deliver innovative, sustainable, and cost-effective solutions. You’ll also play a key role in shaping two of the most impactful infrastructure efforts in Upstate New York: the I-81 Viaduct Project and the Onondaga County/Micron Transportation Improvements—projects that will redefine mobility and connectivity in Central New York. With these transformative projects driving unprecedented momentum, our team is growing rapidly—and so are the opportunities. You’ll step into a role with clear pathways for advancement, the chance to shape the future of our department, and the support, visibility, and resources to take your career wherever you want it to go. Position Responsibilities • Bridge Design: Work on every aspect of bridge design projects, including inspection, structural calculations, geometry layout, plan development, and construction coordination., • Project Development: Assist in progressing bridge projects through the design process, including report writing, environmental permit coordination, and development of contract specifications., • Team Collaboration: Work within a young, dynamic team in progressing challenging bridge projects, gaining technical knowledge and project management expertise from your peers and higher-level staff. Contribute to a collaborative, growth-oriented team culture. Skills, Education & Experience • Bachelor’s degree in Civil Engineering or a related field., • 0-5 years of experience in bridge design, • Proficiency in AutoCAD/Civil 3D and/or MicroStation/OpenRoads, • Strong communication and interpersonal skills Compensation and Benefits: Estimated Salary Range: $73,424 - $104,624* Benefits: Comprehensive health, dental, and vision insurance, life and disability coverage, accident and critical illness insurance, flexible spending accounts, 401(k) plan with company match, generous paid time off (PTO), flexible/hybrid scheduling, tuition reimbursement, employee assistance program (EAP), wellness programs, parental leave, professional development opportunities, employee discounts, and referral program. For more detailed information, please visit C&S Comprehensive Benefits. WHO WE ARE: At C&S Companies, we believe that a great job is about more than just the work—it’s about the people, the culture, and the opportunity to grow. We foster a family-friendly, collaborative, and employee-focused workplace grounded in quality, integrity, trust, fun, and accountability. Belonging is a top priority: we are committed to cultivating and sustaining a safe, inclusive atmosphere where everyone feels valued, supported, and empowered to thrive. C&S is a national planning, design, and construction firm with more than 600 employees and growing. For over 50 years, we’ve delivered critical infrastructure services across aviation, transportation, civil/site infrastructure, planning, sustainability, construction and program management, energy, environmental, facilities, and architecture. We have offices throughout New York State and in California, Florida, Michigan, Arizona, Pennsylvania, Ohio, Washington, and Kentucky. Equal Opportunity Employer/Protected Veterans/Individuals with Disabilities This employer is required to notify all applicants of their rights pursuant to federal employment laws. For further information, please review the Know Your Rights notice from the Department of Labor.

Job DescriptionRole Summary As a Manufacturing Engineer at MacLean-Fogg, you will design, develop, and improve industrial manufacturing processes to optimize efficiency, reduce waste, and enhance product quality. Utilizing expertise in product design, materials, tooling, and production equipment, the Manufacturing Engineer plays a critical role in ensuring smooth production flows, meeting quality standards, and supporting continuous improvement initiatives. Job Details Position Type: Full-Time/Salary (Exempt) Pay Range: $70,000 - $90,000 (depending on skills and experience) Work Location: Onsite - Buffalo, NY Key Responsibilities Analyze and optimize workforce utilization, production workflows, and equipment layouts to maximize manufacturing efficiency and minimize waste. Design or modify equipment and workspace layouts to enhance production flow and space utilization. Estimate production times, staffing requirements, and related costs to support management decision-making and ensure project timelines and budgets are met. Effectively communicate manufacturing capabilities, production schedules, and technical specifications to internal teams and external partners to ensure smooth production operations. Collaborate with vendors to define product specifications, procure equipment and materials, and manage part orders to support production requirements. Ensure timely delivery of materials and components to avoid production delays. Evaluate products, materials, and processes to ensure they meet quality standards and specifications. Implement corrective actions when necessary to address any quality issues in production. Maintain accurate and up-to-date documentation for production processes, specifications, and improvements. Ensure all records are compliant with company and industry standards. Adhere to 5S standards and maintain a clean and organized work environment. Follow all safety, environmental, and quality policies and procedures to ensure a safe and compliant workplace. Contribute to continuous improvement initiatives by identifying areas for process enhancement, cost reduction, and efficiency gains within manufacturing operations. Perform all other duties as assigned. Skills/Competencies Strong verbal and written communication skills. Basic to intermediate understanding of manufacturing processes, materials, tooling, and production equipment. Strong analytical thinking and problem-solving skills to identify inefficiencies and implement solutions. Ability to estimate production times, manage tasks within deadlines, and support planning efforts. Ability to work independently and as part of a collaborative team, balancing priorities and meeting deadlines. Strong attention to detail to ensure accuracy in documentation, production processes, and quality evaluations. Eagerness to contribute to process improvement initiatives and adapt to new technologies and methods. Qualifications Bachelor's in Engineering or related field. 0-2 years of experience or equivalent work experience. Physical Requirements Must be able to lift up to 50 pounds repeatedly. Required to stand for extended periods. Must be able to push/pull objects up to 50 pounds. Frequent bending and stooping required. Must have the dexterity to handle small objects. Must be able to work in noisy environments. Company DescriptionAt MacLean-Fogg, you’ll be part of a global manufacturing leader with a 100-year legacy of innovation and excellence. We partner with some of the world’s most iconic brands to create high-quality fasteners, components, and engineered solutions for industries that shape the future. With the recent addition of Mallard Manufacturing, we’ve expanded into industry-leading gravity flow solutions for material handling. Here, your ideas and skills will make an impact—driving cutting-edge solutions, advancing sustainability, and helping build a better tomorrow. Join a collaborative team where your contributions matter and your career can thrive.At MacLean-Fogg, you’ll be part of a global manufacturing leader with a 100-year legacy of innovation and excellence. We partner with some of the world’s most iconic brands to create high-quality fasteners, components, and engineered solutions for industries that shape the future. With the recent addition of Mallard Manufacturing, we’ve expanded into industry-leading gravity flow solutions for material handling. Here, your ideas and skills will make an impact—driving cutting-edge solutions, advancing sustainability, and helping build a better tomorrow. Join a collaborative team where your contributions matter and your career can thrive.

Job DescriptionDescription At C&S Companies, we believe work environment, culture, and the opportunity to learn and grow are key elements when considering a new job. We are just the right size to provide the resources and support you need without the burdensome bureaucracy of a large corporate environment. To that end, we foster a family-friendly and supportive workplace; collaborative and employee-focused with an emphasis on quality, integrity, trust, fun and accountability. Belonging is a top priority at C&S. We promote personal and professional growth by cultivating and sustaining a safe, inclusive atmosphere where everyone feels a sense of belonging. By encouraging employees to bring their whole selves to work, we create a diverse and equitable environment where all our voices are heard. Position Overview We are seeking experienced Inspectors to be responsible for construction/transportation inspection services on a variety of projects such as bridge/roadway/rail road/intersection/trail repair, replacement and new construction in these NY State cities and locations: Counties of Albany, Broome, Cayuga, Cattaraugus, Chautauqua, Chenango, Clinton, Cortland, Delaware, Erie, Genesee, Jefferson, Lewis, Madison, Monroe, Niagara, Oneida, Onondaga, Ontario, Oswego, Otsego, Putnam, Schoharie, Sullivan, Tioga, and Tompkins, as well as the greater Syracuse, Buffalo, and Albany areas. Opportunities may also exist in support of our Railroad efforts in New Jersey and Northern Pennsylvania. Why Take a Field Assignment With C&S? • We provide full construction support for our field staff throughout the entire assignment., • We offer a great employee benefits package including health insurance, paid holidays, paid vacation, sick time, life/disability insurances and much more., • It is our intent to provide continued employment ranging from temporary short-term assignments up to 1 year in length beginning March/April 2021 to multiyear assignments for candidates who possess additional skills in preparing contract documents, engineering workups and estimates., • We provide paid orientation/training and attentive management support including 24/7 emergency contact., • We provide personal safety equipment at no cost; some inclement weather gear and a clothing allowance for some work related items (i.e. steel toe boots)., • We reimburse work related mileage and tolls., • We pay for work related certifications including paid time off to take test and cost of testing., • Competitive hourly rate and a monthly cell phone stipend. Position Responsibilities: • Independently performs, tests, inspects and records technical work of the highest degree of complexity. Plans and coordinates field construction observation activities and reviews the work of and provides mentoring of other inspectors. Serves as a liaison between the Project Owner, Contractor, and Professional Engineer having project oversight., • Reviews materials against specifications, prepares change orders, prepares and reviews contractor payment applications, and ensures that project records are being prepared in accordance with accepted standards., • A Resident Engineer must be able to fully express thoughts in writing and compile summary reports of other inspectors. Must have the ability to perform with the highest degree of independence, and effectiveness, in the field or in the office, within parameters established through the project plans and specifications. Must be fluent in the use of computers as a tool to aid construction observation., • A Resident Engineer must be an effective communicator with good written communications skills. This position is often required to communicate the requirements of the project plans and specifications to the Contractor and negotiate impacts to the project from changed conditions., • The Resident Engineer must also be familiar with corporate policies and safety requirements., • Utilize safe work practices in accordance with federal, state, local, and company standards., • Communicate incidents, accidents, near misses, potential hazards, and unsafe working conditions to a supervisor or the Health and Safety Department as soon as identified. Required Knowledge, Skills & Abilities: • Desired 10 years of related experience required, or similar position with experience in the construction field and transportation projects., • NICET Level IV certification or a Professional Engineer's (PE) license is required., • Bachelor's Degree desired. Associate's Degree acceptable with relevant experience. Accepted employment offers will be contingent upon the candidate's ability to pass a pre-employment drug and alcohol screen in accordance with Federal Railroad Administration Title 49 CFR Part 219 Estimated Compensation Range: $89,440 - 108,160/year* Learn about our comprehensive Benefits *Actual compensation may vary based on related work experience, geographical location and market conditions, education/training, certifications, and other credentials, as well as applicable knowledge and skills. WHO WE ARE: C&S Companies is a national planning, design, and construction firm with more than 600 employees and growing. For more than 50 years we have been delivering critical infrastructure design, planning and construction services in aviation, civil/site infrastructure, construction and program management, construction/design-build, energy, environmental, facilities, architecture, planning, sustainability, and transportation. We have offices throughout New York State, California, Florida, Michigan, Arizona, Pennsylvania, Ohio, Washington, and Kentucky. Equal Opportunity Employer/Protected Veterans/Individuals with Disabilities This employer is required to notify all applicants of their rights pursuant to federal employment laws. For further information, please review the Know Your Rights notice from the Department of Labor.

Job DescriptionDescription At C&S Companies, we believe work environment, culture, and the opportunity to learn and grow are key elements when considering a new job. We are just the right size to provide the resources and support you need without the burdensome bureaucracy of a large corporate environment. To that end, we foster a family-friendly and supportive workplace; collaborative and employee-focused with an emphasis on quality, integrity, trust, fun and accountability. Diversity, equity, inclusion, and belonging are a top priority at C&S. We promote personal and professional growth by cultivating and sustaining a safe, inclusive atmosphere where everyone feels a sense of belonging. By encouraging employees to bring their whole selves to work, we create a diverse and equitable environment where all our voices are heard. Position Overview We are seeking experienced Inspectors to be responsible for construction/transportation inspection services on a variety of projects such as bridge/roadway/rail road/intersection/trail repair, replacement and new construction in these NY State cities and locations: Counties of Albany, Broome, Cayuga, Cattaraugus, Chautauqua, Chenango, Clinton, Cortland, Delaware, Erie, Genesee, Jefferson, Lewis, Madison, Monroe, Niagara, Oneida, Onondaga, Ontario, Oswego, Otsego, Putnam, Schoharie, Sullivan, Tioga, and Tompkins, as well as the greater Syracuse, Buffalo, and Albany areas. Opportunities may also exist in support of our Railroad efforts in New Jersey and Northern Pennsylvania. Why Take a Field Assignment With C&S? • We provide full construction support for our field staff throughout the entire assignment., • We offer a great employee benefits package including health insurance, paid holidays, paid vacation, sick time, life/disability insurances and much more., • It is our intent to provide continued employment ranging from temporary short-term assignments up to 1 year in length beginning March/April 2021 to multiyear assignments for candidates who possess additional skills in preparing contract documents, engineering workups and estimates., • We provide paid orientation/training and attentive management support including 24/7 emergency contact., • We provide personal safety equipment at no cost; some inclement weather gear and a clothing allowance for some work related items (i.e. steel toe boots)., • We reimburse work related mileage and tolls., • We pay for work related certifications including paid time off to take test and cost of testing., • Competitive hourly rate and a monthly cell phone stipend. Position Responsibilities: • Performs routine construction inspection services under the supervision of a Senior Inspector, Chief Inspector or Resident Engineer., • Duties include taking and documenting detailed measurements for payments, supervising material testing, and notifying supervisor of issues and potential deviations from plans and specifications., • This position requires full knowledge of company standards, plans, and New York State DOT specifications. The skills to demonstrate a basic familiarity with various common job site conditions, communication of project requirements to a contractor, and the ability to maintain a daily report while being familiar with plans and specifications are necessary. Applicants must have the ability to know when issues must be elevated to a supervisor., • Utilize safe work practices in accordance with federal, state, local, and company standards., • Communicate incidents, accidents, near misses, potential hazards, and unsafe working conditions to a supervisor or the Health and Safety Department as soon as identified. Required Knowledge, Skills & Abilities: • Some relevant construction observation experience is preferred., • NICET Level II certification is preferred, or candidate must have a desire to pursue certification during term of employment., • Associates Degree desired; Bachelors' degree a plus. Accepted employment offers will be contingent upon candidate's ability to pass a pre-employment drug and alcohol screen in accordance with Federal Railroad Administration Title 49 CFR Part 219 Estimated Compensation Range: $58,240 - 79,040/year* Learn about our comprehensive Benefits *Actual compensation may vary based on related work experience, geographical location and market conditions, education/training, certifications, and other credentials, as well as applicable knowledge and skills. WHO WE ARE: C&S Companies is a national planning, design, and construction firm with more than 600 employees and growing. For more than 50 years we have been delivering critical infrastructure design, planning and construction services in aviation, civil/site infrastructure, construction and program management, construction/design-build, energy, environmental, facilities, architecture, planning, sustainability, and transportation. We have offices throughout New York State, California, Florida, Michigan, Arizona, Pennsylvania, Ohio, Washington, and Kentucky. Equal Opportunity Employer/Protected Veterans/Individuals with Disabilities This employer is required to notify all applicants of their rights pursuant to federal employment laws. For further information, please review the Know Your Rights notice from the Department of Labor.

Job DescriptionJob Requirements We are seeking a detail-oriented and self-motivated Mechanical Project Engineer with experience in Building Systems design and construction to support the full lifecycle of infrastructure and energy-focused projects. In this role, you will be responsible for performing engineering calculations, equipment selection, system layout and design, field investigations, and the development of construction documents-all while ensuring compliance with relevant codes and standards. You will collaborate in a team environment, using you skills and experience to independently apply engineering judgment, lead technical project meetings, manage workload to meet schedule and financial targets, and collaborate closely with cross-functional teams to deliver successful, cost-effective solutions. The ideal candidate will stay current on industry trends and technologies, conduct life cycle cost analyses, and support business development through technical input, proposals, and estimates. Travel may be required based on project. Work Experience • Associate degree in Engineering or related field required; Bachelor's degree preferred. Higher education degree a plus., • 5+ years of experience in building infrastructure and/or energy reduction initiatives. Proven portfolio of completed projects preferred., • Strong working knowledge of the respective engineering field., • Proficient computer skills, including Microsoft Office products., • Working knowledge of applicable codes and industry standards., • Understanding of safety standards and environmental impact of a design., • Strong communication and customer service skills required. Benefits Advance your career with Stark Tech, a leader in facilities and energy solutions. We specialize in integrating systems, providing energy-efficient equipment and services, and supporting sustainability through innovative technologies like renewable natural gas conversion and energy storage solutions. At Stark Tech, we prioritize employee well-being and offer comprehensive benefits including paid time off, 401(k) with employer match, medical coverage, wellness programs, and career development opportunities. Join our fast-growing, customer-focused organization where your skills and dedication will be valued and rewarded with competitive pay and a positive work environment.

Job Description At C&S Companies, we believe work environment, culture, and the opportunity to learn, and grow are key elements when considering a new job. We are just the right size to provide the resources and support you need without the burdensome bureaucracy of a large corporate environment. To that end, we foster a family-friendly and supportive workplace; collaborative and employee-focused with an emphasis on quality, integrity, trust, fun, and accountability. Diversity, equity, inclusion, and belonging are a top priority at C&S. We promote personal and professional growth by cultivating and sustaining a safe, inclusive atmosphere where everyone feels a sense of belonging. By encouraging employees to bring their whole selves to work, we create a diverse and equitable environment where all our voices are heard. Position Overview C&S is currently seeking a Senior Project Engineer to join our Fuel Facility team. Location at a C&S office is preferred; however, a remote location is negotiable. Full-Time is Preferred; however, Part-Time is negotiable. The Senior Project Engineer is expected to have good relationships with clients and professionals in the fueling systems industry and will be responsible for generating project opportunities and managing fueling systems projects. In this role, the Senior Project Engineer will work with our multi-disciplinary design team to deliver projects in the aviation, automotive, and related fueling systems markets. Position Responsibilities • Develop effort budgets and schedules for prospective project pursuits., • Develop working relationships with existing and prospective clients and professionals., • Generate project opportunities., • Develop and optimize processes for improved efficiency, sustainability, and cost-effectiveness. Apply advanced problem-solving techniques and tools to enhance process design and operations., • Ensure all engineering projects comply with applicable codes, standards, and regulations. Maintain an up-to-date knowledge base of industry standards and government regulations., • Implement and oversee quality assurance protocols to maintain the quality of engineering outputs. Conduct reviews and audits of project deliverables to ensure technical accuracy and integrity., • Champion safety protocols and risk management practices throughout project lifecycles. Analyze potential risks and develop mitigation strategies to prevent accidents and operational failures., • Develop P&IDs for, but not limited to: Aviation Fueling Systems, Automotive Fueling Systems, Heating Oil Systems, and Emergency Generator Systems., • Communicate effectively with all stakeholders, including management, clients, regulatory bodies, and project teams, ensuring clear and consistent communication regarding project progress and issues., • Mentor less experienced engineers and support their professional development., • Utilize safe work practices in accordance with federal, state, local, and company standards., • Communicate incidents, accidents, near misses, potential hazards, and unsafe working conditions to a supervisor or the Health and Safety Department as soon as identified. Skills/Education/Experience • Minimum bachelor’s degree in mechanical, environmental, or industrial engineering or other similar degree., • Minimum 10 years’ experience working on flammable and combustible liquids fueling systems projects., • Professional Engineer (PE) license preferred or willing to pursue PE license., • Understanding of flammable and combustible liquids engineering principles, methodologies, and tools., • Ability to analyze complex engineering problems and develop effective solutions., • Comprehensive knowledge of relevant industry standards, safety regulations, and environmental laws., • Ability to write sequence of operation processes with P&IDs., • Excellent verbal and written communication skills, capable of effectively articulating technical information to non-technical stakeholders and writing detailed reports., • Efficient in; Bluebeam (or other PDF reader), Microsoft Word, Microsoft Excel, and Microsoft Outlook., • Preferred experience in; AutoCAD, and/or Revit. Estimated Compensation Range and Benefits $120,000 - $140,000/year* *Actual compensation may vary based on related work experience, geographical location and market conditions, education/training, certifications, and other credentials, as well as applicable knowledge and skills. Learn about our comprehensive Benefits WHO WE ARE: C&S Companies is a national planning, design, and construction firm with more than 600 employees and growing. For more than 50 years we have been delivering critical infrastructure design, planning and construction services in aviation, civil/site infrastructure, construction and program management, construction/design-build, energy, environmental, facilities, architecture, planning, sustainability, and transportation. We have offices throughout New York State, California, Florida, Michigan, Arizona, Pennsylvania, Ohio, Washington, and Kentucky.

Job Description At C&S Companies, we believe work environment, culture, and the opportunity to learn and grow are key elements when considering a new job. We are just the right size to provide the resources and support you need without the burdensome bureaucracy of a large corporate environment. To that end, we foster a family-friendly and supportive workplace; collaborative and employee-focused with an emphasis on quality, integrity, trust, fun, and accountability. We promote personal and professional growth by cultivating and sustaining a safe, inclusive atmosphere where everyone feels a sense of belonging. By encouraging employees to bring their whole selves to work, we create a diverse and equitable environment where all our voices are heard. Position Overview C&S Companies is seeking a Civil Design Engineer to be based in our Rochester or Buffalo office. This is a great opportunity for an individual to join our civil engineering practice. This candidate will work on multi-disciplinary teams to perform site/civil infrastructure design and construction observation for private development, higher education, K-12 schools municipal, and healthcare clients. Responsibilities include field data collection, analysis, and development of engineering plans using CAD software and 3D models, and preparation of engineering reports, specifications, and cost estimates. Work is initially performed under close supervision with potential to progress to independent work based on performance. Relocation assistance available for qualified candidates. Occasional day travel will be required. Required Knowledge, Skills & Abilities • 0-3 years’ experience, • B.S. Degree in Civil Engineering, • EIT certification (or intent to pursue in near future), • Skills to succeed in small and large multi-disciplinary team environments, • Excellent communication and organization skills, • Proficiency in Microsoft Office Desired Education & Experience • Proficient with AutoCAD, AutoCAD Civil 3D, • DEC Certified Stormwater Training & Certification Program “Qualified Inspector” Estimated Compensation Range and Benefits $78,000 - $85,000/year* *Actual compensation may vary based on related work experience, geographical location and market conditions, education/training, certifications, and other credentials, as well as applicable knowledge and skills. Learn about our comprehensive Benefits WHO WE ARE: C&S Companies is a national planning, design, and construction firm with more than 600 employees and growing. For more than 50 years we have been delivering critical infrastructure design, planning and construction services in aviation, civil/site infrastructure, construction and program management, construction/design-build, energy, environmental, facilities, architecture, planning, sustainability, and transportation. We have offices throughout New York State, California, Florida, Michigan, Arizona, Pennsylvania, Ohio, Washington, and Kentucky.

Job DescriptionDescription At C&S Companies, we believe work environment, culture, and the opportunity to learn and grow are key elements when considering a new job. We are just the right size to provide the resources and support you need without the burdensome bureaucracy of a large corporate environment. To that end, we foster a family-friendly and supportive workplace; collaborative and employee-focused with an emphasis on quality, integrity, trust, fun and accountability. Belonging is a top priority at C&S. We promote personal and professional growth by cultivating and sustaining a safe, inclusive atmosphere where everyone feels a sense of belonging. By encouraging employees to bring their whole selves to work, we create a diverse and equitable environment where all our voices are heard. Position Overview We are seeking experienced Transportation Inspectors to be responsible for construction/transportation inspection services on a variety of projects such as bridge/roadway/rail road/intersection/trail repair, replacement and new construction in these NY State cities and locations: Counties of Albany, Broome, Cayuga, Cattaraugus, Chautauqua, Chenango, Clinton, Cortland, Delaware, Erie, Genesee, Jefferson, Lewis, Madison, Monroe, Niagara, Oneida, Onondaga, Ontario, Oswego, Otsego, Putnam, Schoharie, Sullivan, Tioga, and Tompkins, as well as the greater Syracuse, Buffalo, and Albany areas. Opportunities may also exist in support of our Railroad efforts in New Jersey and Northern Pennsylvania. Why Take a Field Assignment With C&S? • We provide full construction support for our field staff throughout the entire assignment., • We offer a great employee benefits package including health insurance, paid holidays, paid vacation, sick time, life/disability insurances and much more., • It is our intent to provide continued employment ranging from temporary short-term assignments up to 1 year in length beginning March/April 2021 to multiyear assignments for candidates who possess additional skills in preparing contract documents, engineering workups and estimates., • We provide paid orientation/training and attentive management support including 24/7 emergency contact., • We provide personal safety equipment at no cost; some inclement weather gear and a clothing allowance for some work related items (i.e. steel toe boots)., • We reimburse work related mileage and tolls., • We pay for work related certifications including paid time off to take test and cost of testing., • Competitive hourly rate and a monthly cell phone stipend. Position Responsibilities: • Working largely independently, performs routine construction inspection services under the supervision of a Chief Inspector or Resident Engineer. May be responsible for review and assignment of work for Inspector(s)., • Duties include taking and documenting detailed measurements for payment, supervising material testing, notifying supervisor of issues and potential deviations from plans and specifications, and working with the contractor to resolve minor issues without guidance., • This position requires full knowledge of company standards, plans, and New York State DOT specifications. Qualified candidates will demonstrate familiarity and competence with various common job site conditions, will be able to clearly communicate project requirements to a contractor, and have the ability to resolve day-to-day disputes with a contractor, as well as have the experience required to know when to elevate an issue to their supervisor, all while maintaining detailed records of work and measurements and documentation for payment., • Utilize safe work practices in accordance with federal, state, local, and company standards., • Communicate incidents, accidents, near misses, potential hazards, and unsafe working conditions to a supervisor or the Health and Safety Department as soon as identified. Required Knowledge, Skills & Abilities: • Desired 5 years related experience, or similar position with experience in the construction field and transportation projects., • NICET Level III certification or successful completion of Fundamentals of Engineering exam required., • Associates Degree required; Bachelor's Degree a plus. Accepted employment offers will be contingent upon candidate's ability to pass a pre-employment drug and alcohol screen in accordance with Federal Railroad Administration Title 49 CFR Part 219 Estimated Compensation Range: $79,040- 95,680.00/year* Learn about our comprehensive Benefits *Actual compensation may vary based on related work experience, geographical location and market conditions, education/training, certifications, and other credentials, as well as applicable knowledge and skills. WHO WE ARE: C&S Companies is a national planning, design, and construction firm with more than 600 employees and growing. For more than 50 years we have been delivering critical infrastructure design, planning and construction services in aviation, civil/site infrastructure, construction and program management, construction/design-build, energy, environmental, facilities, architecture, planning, sustainability, and transportation. We have offices throughout New York State, California, Florida, Michigan, Arizona, Pennsylvania, Ohio, Washington, and Kentucky. Equal Opportunity Employer/Protected Veterans/Individuals with Disabilities This employer is required to notify all applicants of their rights pursuant to federal employment laws. For further information, please review the Know Your Rights notice from the Department of Labor.

Job Description At C&S Companies, we believe work environment, culture, and the opportunity to learn and grow are key elements when considering a new job. We are just the right size to provide the resources and support you need without the burdensome bureaucracy of a large corporate environment. To that end, we foster a family-friendly and supportive workplace; collaborative and employee-focused with an emphasis on quality, integrity, trust, fun, and accountability. We promote personal and professional growth by cultivating and sustaining a safe, inclusive atmosphere where everyone feels a sense of belonging. By encouraging employees to bring their whole selves to work, we create a diverse and equitable environment where all our voices are heard. Position Overview C&S Companies is seeking a senior level environmental engineer to support our continued growth of our environmental investigation and remediation practice. Ideal candidates will have a diverse and successful record of developing, managing, and delivering environmental investigation and remediation projects and leading project teams. In this role, responsibilities include, but are not limited to: • Independently lead complex environmental projects and project teams, • Mentor professional staff on technical matters, • Model professional excellence within and outside of C&S, • Provide advanced technical, project, and people (project team) leadership, • Exercise high degree of judgment, independence, and accountability, • Maintain a high standard of quality in deliverables and ensure same of project team members, • Positively represent C&S in various environmental organizations and forums, • Prepare high-quality environmental reports, work plans, remedial design documents, and other deliverables, • Review and approve technical work products prepared by others, • Establish and maintain effective working relationships with clients, subconsultants, and regulators Required Knowledge, Skills & Abilities • Professional licensure in New York as a Professional Engineer; licensure in other states beneficial, • 10 or more years of progressive experience in the environmental remediation industry, • Proven track record of successfully maintaining and building client relationships, planning and executing projects, and working collaboratively with diverse project teams, • Strong project management, business development, organizational and technical skills, • Experience in serving as primary client contact and in managing project teams and budgets, • High level of self-motivation with excellent technical writing and documentation skills, • Advanced, in-depth knowledge of current and emerging remedial technologies and New York and US environmental regulations, policies, and procedures Estimated Compensation Range and Benefits $120,000 - $130,000/year* *Actual compensation may vary based on related work experience, geographical location and market conditions, education/training, certifications, and other credentials, as well as applicable knowledge and skills. Learn about our comprehensive Benefits WHO WE ARE: C&S Companies is a national planning, design, and construction firm with more than 600 employees and growing. For more than 50 years we have been delivering critical infrastructure design, planning and construction services in aviation, civil/site infrastructure, construction and program management, construction/design-build, energy, environmental, facilities, architecture, planning, sustainability, and transportation. We have offices throughout New York State, California, Florida, Michigan, Arizona, Pennsylvania, Ohio, Washington, and Kentucky.

Job Location US-NY-Buffalo ID 2026-4054 of Openings 1 Posted Date 21 hours ago(5/28/2026 1:26 PM) Wieland - Creating Value for Generations! Wieland is a global leader in copper and copper alloy manufacturing, processing, and distribution. We provide a large product and service portfolio including power, automotive, ammunition, coinage, construction materials, refrigeration, electronics and many other industries. To us, metal is more than material. Wieland's Cultural Values Wieland's culture is what makes for a fun and rewarding place to work! As a company, we benefit daily from our employees' knowledge and abilities. With our cultural vision, we place our core values at the heart of everything we do: safety, ambition, optimism, reliability, ownership, diversity, & respect. Wieland is hiring an Electrical Engineer. The Electrical Engineer will be responsible for directing daily activity of Industrial Electricians to minimize equipment downtime. Additionally, this person will provide electrical/electronic expertise to troubleshoot and upgrade all plant equipment. This role is located in Buffalo, NY, and will be fully on-site. Base Salary Range: $85,000 - $105,000 May be eligible for a variable compensation plan bonus based upon company performance within the fiscal year cycle. At Wieland, we recognize that attracting the best talent is key to our strategy and success as a company. As a result, our ranges reflect our good-faith estimate to pay fairly. The final pay offered to a successful candidate will be based upon various factors unique to each individual that may include, but are not limited to, years of experience, industry knowledge, technical skills, education, qualifications, etc. Electrical Engineer Responsibilities: Analyze recurring equipment problems, recommend and implement long-term solutions to increase plant productivity and efficiency. • Duties include the planning, scheduling, design, supervision, implementation, commissioning, and creating/modifying documentation and drawings of electrical/electronic projects on a small/medium scale., • Maintain and enhance plant electrical/electronic schematics and literature to provide sufficient technical resources of information and minimize electrical/electronic breakdown time., • Maintain system software backups and system documentation., • Instruct peers on updated troubleshooting techniques and attend pertinent training programs and seminars to acquire state-of-the-art knowledge of electrical/electronic industrial systems., • Maintain spare parts and test equipment to ensure effective maintenance and repair of all plant electrical/electronic equipment., • Ensure a safe and healthy work environment by adhering to company policies. Promote a climate of positive labor relations by adhering to the labor contract., • Work alongside mechanical trades and engineers in troubleshooting machine issues., • Work with production employees in understanding and resolving obstacles., • Participate in continuous improvement of ISO 14001, ISO 45001, ISO 50001, ISO 9001, IATF 16949 programs and procedures though active participation in the near miss program., • Handles containerizing and labeling universal wastes, including batteries and lamps, as well as spent aerosol cans (HW). Electrical Engineer Qualifications: • BS/BT degree in Electrical Engineering., • Two (2) years of industrial experience, including PLC, AC/DC drives, industrial instrumentation, motor controls experience required; Five (5) years industrial experience preferred., • Experience with Allen-Bradley PLCs is required., • Experience with high-power applications is required., • Six Sigma certification preferred. Joining Wieland's team gives you... • Benefits - Including Medical, Dental, Vision, Disability, Life & more!, • Retirement Savings - 401(k) contribution + match., • Work/Life Balance - Paid Vacation & Holidays., • Growth Opportunities - We have over 9,000+ employees worldwide and 40+ locations in North America alone. Growth opportunities are limitless!, • Wellness Programs - Wieland encourages participation in our unique and personalized approach to wellness, where you are eligible to earn healthcare premium discounts as well as HSA employer contributions based on your status within the program., • Sustainability- Wieland continues to break ground with eco-friendly solutions and push the barrier in sustainability for future generations. Wieland is an equal opportunity and affirmative action employer. We celebrate diversity and are committed to fostering an inclusive environment for all employees. Come join Wieland today and help us continue to build a global corporation we are all proud to belong to.

Job Location US-NY-Buffalo ID 2026-3760 of Openings 1 Posted Date 4 months ago(1/29/2026 10:34 AM) Wieland - Creating Value for Generations! Wieland is a global leader in copper and copper alloy manufacturing, processing, and distribution. We provide a large product and service portfolio including power, automotive, ammunition, coinage, construction materials, refrigeration, electronics and many other industries. To us, metal is more than material. Wieland's Cultural Values Wieland's culture is what makes for a fun and rewarding place to work! As a company, we benefit daily from our employees' knowledge and abilities. With our cultural vision, we place our core values at the heart of everything we do: safety, ambition, optimism, reliability, ownership, diversity, & respect. Wieland is hiring a Mechanical Engineer. The Mechanical Engineer will be responsible for Responsible for mechanical engineering effort as necessary to support plant operations, process improvements, capital projects, design file maintenance, and personnel development. This effort contributes to improved plant performance and profitability through optimization of engineering effectiveness. This role is located in Buffalo and will be fully on-site. Base Salary Range: $85,000-$105,000 May be eligible for a variable compensation plan bonus based upon company performance within fiscal year cycle. At Wieland, we recognize that attracting the best talent is key to our strategy and success as a company. As a result, our ranges reflect our good faith estimate to pay fairly. The final pay offered to a successful candidate will be based upon various factors unique to each individual that may include but are not limited to years of experience, industry knowledge, technical skills, education, qualifications, etc. Mechanical Engineer Responsibilities: Engineer and design modifications to existing equipment to improve production and reduce maintenance costs. • Direct and coordinate major overhauls and rebuilds to improve quality and yield. Maintain minimum downtime and production delays., • Communicate and coordinate equipment maintenance requirements and activities with the maintenance department regarding manpower and downtime requirements, acquiring input form equipment operators and maintenance staff., • Oversee preventive maintenance activity, such as long-range planning to ensure maximum production and utilization of production equipment., • Coordinate with contractors on design and implementation of new equipment regarding required maintenance and replacement parts to ensure optimal utilization and longevity of equipment., • Maintain equipment to comply with local, state and federal government and insurance company regulations., • Direct and coordinate bargaining unit employees as required. Promote safe and healthy workplace. Ensure optimal labor relations by adhering to the contract and Company policies. Maintain good housekeeping and organization within the department. Mechanical Engineer Qualifications: • Participate in continuous improvement of ISO 14001, ISO 45001, ISO 50001, 9001, IATF 16949 programs and procedures though active participation in the near miss program., • Handles containerizing and labeling universal wastes including batteries and lamps, as well as spent aerosol cans(HW)., • 5 years' experience, • BS Degree- Mechanical Engineering Joining Wieland's team gives you... • Benefits - Including Medical, Dental, Vision, Disability, Life & more!, • Retirement Savings - 401(k) contribution + match., • Work/Life Balance - Paid Vacation & Holidays., • Growth Opportunities - We have over 9,000+ employees worldwide and 40+ locations in North America alone. Growth opportunities are limitless!, • Wellness Programs - Wieland encourages participation in our unique and personalized approach to wellness, where you are eligible to earn healthcare premium discounts as well as HSA employer contributions based on your status within the program., • Sustainability- Wieland continues to break ground with eco-friendly solutions and push the barrier in sustainability for future generations. Wieland is an equal opportunity and affirmative action employer. We celebrate diversity and are committed to fostering an inclusive environment for all employees. Come join Wieland today and help us continue to build a global corporation we are all proud to belong to.

Job Location US-NY-Buffalo ID 2026-3981 of Openings 1 Posted Date 1 month ago(4/29/2026 2:25 PM) Wieland - Creating Value for Generations! Wieland is a global leader in copper and copper alloy manufacturing, processing, and distribution. We provide a large product and service portfolio including power, automotive, ammunition, coinage, construction materials, refrigeration, electronics and many other industries. To us, metal is more than material. Wieland's Cultural Values Wieland's culture is what makes for a fun and rewarding place to work! As a company, we benefit daily from our employees' knowledge and abilities. With our cultural vision, we place our core values at the heart of everything we do: safety, ambition, optimism, reliability, ownership, diversity, & respect. Wieland is hiring a Project Engineer - Mechanical. The Project Engineer will be responsible for engineering and project management of capital projects as necessary to support plant process improvements, equipment and maintenance upgrades funded by capital investment. This effort contributes to improved plant performance and profitability through optimization of engineering effectiveness. This role is located in Buffalo, NY and will be fully on-site. Base Salary Range: $95,000-$125,000 May be eligible for a variable compensation plan bonus based upon company performance within fiscal year cycle. At Wieland, we recognize that attracting the best talent is key to our strategy and success as a company. As a result, our ranges reflect our good faith estimate to pay fairly. The final pay offered to a successful candidate will be based upon various factors unique to each individual that may include but are not limited to years of experience, industry knowledge, technical skills, education, qualifications, etc. Project Engineer Responsibilities: Analyzes production processes as requested and recommends changes to procedures and/or equipment to improve productivity, equipment reliability and to reduce costs. • Contributes to long range planning and research for capital budget preparation., • Initiates and implements capital projects within schedule and budget constraints., • Coordinates engineering, maintenance, contractors', and production activities to ensure successful equipment start-up, operator training, and operation at projected capacities., • Provides post-project completion analysis detail as feedback to staff and administrative levels to illustrate performance efficiencies. Project Engineer Qualifications: • Education - BS/BT Mechanical Engineering (4-year degree), • Experience - Minimum 5 years in heavy manufacturing/industrial environment, including experience in hydraulics, maintenance systems, troubleshooting and project management. Must be proficient in CAD, with AutoCAD experienced preferred. Must be proficient in writing both technical equipment specifications and installation specifications, reviewing and evaluating vendor proposals and implementing multi-discipline projects with minimal direction and engineering assistance. Must have good communications skills and actively solicit input from all stakeholders on potential projects to ensure each project is successfully completed and meets expectations., • Participate in continuous improvement of ISO 14001, ISO 45001, ISO 50001, 9001, IATF 16949 programs and procedures though active participation in the near miss program. Joining Wieland's team gives you... • Benefits - Including Medical, Dental, Vision, Disability, Life & more!, • Retirement Savings - 401(k) contribution + match., • Work/Life Balance - Paid Vacation & Holidays., • Growth Opportunities - We have over 9,000+ employees worldwide and 40+ locations in North America alone. Growth opportunities are limitless!, • Wellness Programs - Wieland encourages participation in our unique and personalized approach to wellness, where you are eligible to earn healthcare premium discounts as well as HSA employer contributions based on your status within the program., • Sustainability- Wieland continues to break ground with eco-friendly solutions and push the barrier in sustainability for future generations. Wieland is an equal opportunity and affirmative action employer. We celebrate diversity and are committed to fostering an inclusive environment for all employees. Come join Wieland today and help us continue to build a global corporation we are all proud to belong to.

Job DescriptionJob Requirements The Senior Sales Engineer (SE) is responsible for elevating awareness to Stark Tech's core competencies and capabilities through active account management with assigned accounts to achieve revenue and profit targets. This individual will work with management and peers on account management, sales strategies and goal achievement, project design, project bidding, project management, and pipeline management. In addition, this role will be a strong technical resource for customers and will develop professional relationships with the manufacturers that Stark's Building Solutions Sales & Marketing team represents. Work Experience • Associate's degree in engineering required. Bachelor's degree preferred., • 10 years of experience in sales engineering., • A proven track record in account management., • Knowledge of construction industry., • Understanding of product and systems application and design & project management., • Strong Computer skills including Microsoft Office Suite is essential. Benefits Advance your career with Stark Tech, a leader in facilities and energy solutions. We specialize in integrating systems, providing energy-efficient equipment and services, and supporting sustainability through innovative technologies like renewable natural gas conversion and energy storage solutions. At Stark Tech, we prioritize employee well-being and offer comprehensive benefits including paid time off, 401(k) with employer match, medical coverage, wellness programs, and career development opportunities. Join our fast-growing, customer-focused organization where your skills and dedication will be valued and rewarded with competitive pay and a positive work environment.

Experts contribute directly to how AI systems learn, reason, and perform across domains like finance, healthcare, engineering, and more. Generate, review, and refine questions and solutions based on real-world mechanical engineering scenarios. Apply advanced subject matter knowledge to evaluate and

Olive Jar Digital is looking for an experienced Data Engineer for a 6-month fixed-term contract. Candidates should have strong skills in data engineering, SQL, and Python, and experience with Microsoft Purview.

Master’s degree in disciplines covering data science, medicine, software engineering, pharmacy, DevOps and SecOps. Build data science and data engineering pipelines specific to analyzing clinical data, such as extracting information from medical text or images, or integrating uncertain information

Software Engineering Intern (Frontend Focus) Duration: 5 months, with potential extension Compensation: $20-$28 per hour What You'll Do Build reusable, responsive web components from mockups or designs. Collaborate with engineers and marketers to integrate real data and optimize performance.

A cybersecurity firm in the United States is offering an unpaid internship for students interested in Cybersecurity and AI Engineering. Interns will gain hands-on experience in areas like Website UI Development, Software Engineering, and Security Analysis while earning course credit.

We’re seeking a highly motivated Software Engineering Intern to join the Payments team at Blockchain. Write clean, maintainable, and testable code under the guidance of experienced engineers. Help resolve technical issues related to payments in collaboration with the FinOps and engineering teams.

PHIL is seeking a motivated AI Developer Summer Intern to join our Engineering team.

Haley & Aldrich is seeking a Project Environmental Scientist to manage and analyze environmental data remotely within the United States.The successful candidate will support diverse environmental investigations, requiring a BS/BA in a related field and 3-5 years of experience in data management.A co

Job Title: Cloud Project Manager Reports to: VP, Cloud Infrastructure Operations Location: Remote – US The Role As a Cloud Project Manager, you will oversee the planning,execution, and delivery of cloud-based projects focusinginitially on a large scale migration to Amazon Web Services(AWS).You w

This range is provided by Naviron.Your actual pay will be based on your skills and experience — talk with your recruiter to learn more.Naviron is pleased to partner with a growing SaaS company with an all-in-one platform that helps non‑profits manage their websites, memberships, events, finance,

A growing eCommerce brand is seeking an Ecommerce Operations Project Manager to own cross-functional project management and operational coordination.The ideal candidate should be organized, proactive, and detail-oriented, with proven experience in managing workflows.You will work closely with variou

A recruitment agency is seeking an experienced Project Manager to drive digital projects and manage cross-functional teams.You will create and oversee project plans, identify risks, and communicate with key stakeholders.The ideal candidate has 5+ years of Project Management experience, strong commun

TTEC Digital is seeking an AWS Project Manager to join our team.This is a 100% remote role based in the US.Our TTEC Digital AWS Partner Practice is comprised of 150+ brilliant technical experts, has received numerous best-in-class awards from AWS, was the first signed Amazon Connect partner globally

Demonstrate a deep understanding of full systems development life cycle, enterprise-wide network engineering, strategic information planning, business process re-engineering, structure and management practices.

IT Project Manager & Business Systems Analyst Join to apply for the IT Project Manager & Business Systems Analyst role at eSkillz eSkillz is passionate about empowering people through personalized, people-first technology solutions.We transform learning and talent management platforms into tools tha

A leading marketing agency is seeking a Temporary Project Manager for a six-month contract to oversee digital projects from conception to launch.The ideal candidate should have 2-5 years of project management experience in an agency, with proven organizational and communication skills.This role allo

Partner with engineering leads to monitor sprint velocity, manage technical risks, and enforce DevOps, security, and responsible AI standards. Bachelor's degree in Computer Science, Information Systems, Engineering, or related field. This role bridges business strategy and technology execution-manag

Engage in cross‑functional collaboration with key internal stakeholders, including our Launcher, Account Management, Product, Engineering, and other Operations teams, to provide an exceptional experience for every customer. Experience working cross‑functionally with sales, operations, and engine

A leading IT recruitment firm is seeking a Technical Resource Manager specializing in Quality Assurance and project management.The role involves managing SDLC projects, particularly focused on migrating Jira, Confluence, and Bitbucket from Data Center to Cloud.Candidates should possess a minimum of

A leading technology services provider is seeking a Project Manager to oversee Cohesity implementation engagements.This remote role involves managing the project lifecycle, ensuring timely delivery, and maintaining communication with stakeholders.Candidates should have 2–5 years of project managem

Overview We are seeking an experienced Oracle Cloud SCM Functional Consultant to join our team.The ideal candidate will have strong expertise in Oracle Cloud Supply Chain Management (SCM) modules and a deep understanding of supply chain processes.This role involves working closely with business stak

KMHA is seeking a full-time Healthcare IT Project Manager (HCIT PM) to join our organization in a key role supporting our Healthcare IT projects.This is a remote position with the opportunity to work for an innovative, supportive, and mission-driven company in the healthcare technology space.Prior h

The NetSuite Project Manager is responsible for planning, executing, and finalizing NetSuite implementation projects within scope, budget, and timeline.This role involves coordinating with internal teams, clients, and stakeholders to ensure successful project delivery.The Project Manager will overse

A leading project management firm is seeking a Project Manager to lead project planning and implementation remotely.The ideal candidate has over 2 years of experience in an Agile/Scrum environment, proficiency in project management tools like Jira, and strong problem-solving abilities.This role offe

A leading virtual software company is offering a Web Engineering Internship aimed at motivated students and recent graduates seeking hands-on experience in building modern web applications. Interns will work alongside experienced engineers in a remote environment, gaining exposure to AI-assisted dev

Integration & Process Management: Ensure smooth coordination across engineering, QA, and product teams; manage change and delivery processes.