System engineer jobs in Albany, New YorkCrear alertas

Job Description Overview Now Hiring! Analog Electrical Engineer Location: Albany, NY 12205 Schedule: Full Time Job Summary: Vitrek is currently looking for an experienced Senior Analog Electrical Engineer to join our growing team of Software and Electrical engineers.This position is for a Full-Time Engineer charged with leading system design at our engineering center of excellence located in Albany, NY. You would be part of a team of engineers designing the next generation of products as well as maintaining the existing product line.You would report to the Vice President of Engineering.What's in it for You: • Medical, Dental, Vision Benefits, • Competitive Base Compensation, • Accrued PTO Plan, • Career advancement opportunities in an expanding companyWhat You’ll Need:, • BS/MS EE from an ABET-accredited university, • 5+ years of relevant experience in analog design, • Proof of eligibility to legally work within the United States, • Domestic and International travel may be required. The travel requirement is currently estimated to be less than 10%.Nice to Have:, • Switching Inverters intended for smaller devices with a power of less than 50W, • Low and ultra-low noise analog amplifiers using both op amps and discrete transistors, • Audio amplifiers, • Analog filters using active components, • RF circuit design and testing What You’ll Do: • Digital, mixed signal, and analog circuit design including component selection, SPICE simulation, schematic/layout/BOM, and debugging. The primary skill focus will be mixed signal and analog design, • Circuit Performance testing, focusing on noise performance and stability, • Legacy and Production Support, • Application Support

Job Description Advance your career with the Stark Tech team. We'll shape your future together! Stark Tech is a total optimization provider of facilities and energy solutions. Stark Tech leads the market in providing cutting-edge facilities and energy solutions. We integrate systems, offer energy-efficient equipment and services, and provide building analytics to help customers meet sustainability goals. Our large-scale equipment converts waste to renewable natural gas, reducing greenhouse gas emissions. Additionally, we enhance the utility grid with microgrid and battery energy storage solutions, along with solar development consulting services. Join Stark Tech to be part of the future of energy transformation. What you can expect We believe your well-being and satisfaction are vital for a fulfilling career. We are gritty, employee, and customer focused. Here are some of the benefits we provide: • Paid Time Off & Holidays, • 401(k) with employer match, • Medical/Dental/Vision insurance, • Health Savings Account (HSA) and Flexible Spending Account (FSA), • HSA employer contribution, • Life and Disability insurance, • Wellness Program (participation incentives), • Employee Assistance Program, • Competitive pay Stark Tech is seeking a Senior Project Engineer - Mechanical who excels by transforming mechanical system requirements into high-performance, energy-efficient, and fully integrated building solutions. You lead projects from conceptual design through construction support and commissioning, applying deep technical expertise in HVAC, hydronics, central plant systems, and air distribution to ensure every design is safe, code-compliant, and optimized for long-term reliability. You thrive at bridging early pre-construction solutioning with detailed engineering and field execution-collaborating across mechanical, electrical, structural, controls, and architectural teams to deliver systems that perform as designed in the real world. Through technical leadership, clear communication, and mentorship of engineering and design staff, you elevate project quality, improve constructability, reduce risk, and strengthen Stark Tech's reputation for delivering high-performance mechanical infrastructure. What are we looking for • Associate degree required; Bachelor's degree preferred. Advanced degree a plus., • 10+ years of experience in mechanical building systems or energy-driven infrastructure projects., • Proven experience leading projects and managing engineering or cross-functional teams., • Expertise in HVAC system design, load calculations, equipment selection, air and fluid distribution, and central plant systems., • Experience defining sequences of operation and integrating mechanical systems with BAS platforms., • Proven ability to conduct system retrofits, upgrades, and performance optimization analyses., • Thorough knowledge of applicable codes, safety standards, and environmental/regulatory considerations., • Skilled in creating Basis of Design documents, narratives, specifications, and construction documentation., • Experience coordinating mechanical designs with electrical, structural, controls, and architectural teams., • Proven ability to mentor junior engineers and influence cross-functional project teams., • Strong customer-facing communication skills. Our fast-growing organization offers competitive pay, a positive work environment, and opportunities for career growth within the company. If you're a motivated individual with a sense of accountability, resiliency, and a dedication to providing exceptional customer service, we encourage you to get in touch with us. The advertised compensation range for this position represents what we believe, at the time of posting, to be competitive and acceptable by reviewing comprehensive market data to include industry, and roles of similar responsibility and level. Within the range, wage will be determined by several factors including candidate knowledge, job-related skills, experience, and relevant education or training. Job Posted by ApplicantPro

Job Description Advance your career with the Stark Tech team. We'll shape your future together! Stark Tech is a total optimization provider of facilities and energy solutions. Stark Tech leads the market in providing cutting-edge facilities and energy solutions. We integrate systems, offer energy-efficient equipment and services, and provide building analytics to help customers meet sustainability goals. Our large-scale equipment converts waste to renewable natural gas, reducing greenhouse gas emissions. Additionally, we enhance the utility grid with microgrid and battery energy storage solutions, along with solar development consulting services. Join Stark Tech to be part of the future of energy transformation. What you can expect We believe your well-being and satisfaction are vital for a fulfilling career. We are gritty, employee, and customer focused. Here are some of the benefits we provide: • Paid Time Off & Holidays, • 401(k) with employer match, • Medical/Dental/Vision insurance, • Health Savings Account (HSA) and Flexible Spending Account (FSA), • HSA employer contribution, • Life and Disability insurance, • Wellness Program (participation incentives), • Employee Assistance Program, • Competitive pay Stark Tech is seeking a Senior Project Engineer - Electrical who excels by transforming complex electrical requirements into safe, reliable, and integrated building infrastructure solutions. You lead projects from conceptual design through commissioning, using deep technical expertise, system analysis, and real-world constructability insight to ensure every electrical system is code-compliant, cost-effective, and optimized for long-term performance. You thrive at bridging design and field execution-coordinating seamlessly with mechanical, controls, and low-voltage teams to deliver fully integrated building solutions that support smarter, more efficient operations. Through technical leadership, cross-functional collaboration, and mentoring of engineering staff, you elevate project quality, reduce risk, and strengthen Stark Tech's reputation for delivering high-performing electrical infrastructure. What are we looking for • Associate degree required; Bachelor's degree preferred. Advanced degree a plus., • 10+ years of experience in electrical building infrastructure, power distribution, or energy/efficiency-driven electrical design., • Proven experience leading projects and managing engineering or cross-functional teams., • Expert knowledge of NEC, NFPA, IEEE, and local AHJ electrical requirements., • Strong understanding of service entrance design, switchgear, grounding, lighting, motor control, and distribution systems., • Experience performing power system studies (short circuit, arc-flash, coordination, voltage drop, load analysis)., • Skilled in producing Basis of Design documents, one-lines, riser diagrams, specifications, and construction documentation., • Ability to coordinate electrical designs with mechanical, structural, controls, and IT teams for fully integrated solutions., • Experience supporting commissioning, functional testing, performance verification, and owner turnover processes., • Proven ability to mentor junior engineers and influence cross-functional project teams., • Strong customer-facing communication skills. Our fast-growing organization offers competitive pay, a positive work environment, and opportunities for career growth within the company. If you're a motivated individual with a sense of accountability, resiliency, and a dedication to providing exceptional customer service, we encourage you to get in touch with us. The advertised compensation range for this position represents what we believe, at the time of posting, to be competitive and acceptable by reviewing comprehensive market data to include industry, and roles of similar responsibility and level. Within the range, wage will be determined by several factors including candidate knowledge, job-related skills, experience, and relevant education or training. Job Posted by ApplicantPro

Job DescriptionExperience: 1 - 30 YearsLocation:Albany Must Have: Minimum of four years of CT/MR (Siemens/GE) equipment troubleshooting and repair experience required. Employment Type: Full-Time ✈️ Travel: 5075% within assigned territory Job Summary The Field Service Engineer (FSE) provides frontline technical support to customers by troubleshooting, repairing, calibrating, and verifying the performance of complex diagnostic imaging equipment. This role primarily supports customers within an assigned territory and requires timely travel to customer sites. The position is remote/work-from-home, with engineers dispatched directly to customer locations as needed. Key Responsibilities * Serve as the primary onsite support engineer for contract, warranty, and billable service calls within the assigned territory * Provide backup onsite support in other territories when required * Diagnose and resolve system and component issues, including software reloads and hardware replacement, to meet OEM performance standards * Perform preventive maintenance (PM) and routine service activities * Communicate with internal Service Support, Service Managers, and technical teams to track and close service calls * Consult via phone, email, and Microsoft Teams with leadership and technical staff to troubleshoot and resolve escalated issues * Maintain professional, customer-focused communication aligned with company values * Participate in an on-call rotation for after-hours support * Generate and report system sales leads to the sales team * Train and share equipment knowledge internally across the organization * Ensure compliance with ISO 13485:2016 and company Quality Management System requirements * Identify process improvement opportunities to enhance service efficiency * Adhere to company policies, safety standards, and employment guidelines * Perform additional duties as assigned Required Education Experience * Associates degree in Biomedical, Electrical/Electronics, or Computer Engineering Technology, OR military technical training, OR equivalent combination of education and experience * Minimum 4 years of hands-on CT/MR troubleshooting and repair experience (required) * GE and/or Siemens OEM training strongly preferred * Advanced troubleshooting experience across multi-OEM and multi-modality systems is a plus * Ability to complete required customer credentialing processes (mandatory) Skills Qualifications * Strong troubleshooting and analytical problem-solving skills * Excellent written and verbal communication skills * Proficiency with Microsoft Office; ERP system experience is a plus * Ability to work independently with limited supervision * Willingness to learn and support new technologies and system models Physical Travel Requirements * Willing and able to travel 5075% of the time * Valid drivers license with insurable Motor Vehicle Record * Ability to lift, carry, or move up to 100 lbs * Ability to bend, crouch, kneel, climb, and maneuver while servicing equipment Compensation Benefits * Competitive salary (commensurate with experience) * Flexible work schedule * Company-sponsored benefits including: * Medical, Dental, Vision * Life Disability Insurance * 401(k) * Paid Time Off (PTO) and company-paid holidays

Job Description Job Title: Field Service Engineer II – Onsite Reports to: Site Coordinator Classification: Non-Exempt Summary: This position entails the installation, service, troubleshooting and repair of complex electronic and electromechanical equipment, site service, field process applications, and qualifications. In addition, the position is accountable for being able to operate as an independent “product expert” on select EVG product lines. Capable of assisting in the implementation of detailed, complex customer installation plans for reliability, process qualification, and sign-off. Training customer personnel on advanced equipment operation, maintenance procedures and process related operations. Provides onsite technical support for development and implementation of equipment and process applications. Trains other Field Service Engineers on specific product lines. Essential Duties and Responsibilities: To perform this job successfully, the individual must be able to perform each of the primary duties satisfactorily. The requirements listed below are representative of the knowledge, skill and/or ability required. • Provides professional and courteous service to customers with a primary goal of complete customer satisfaction., • Assists customers and other personnel in identifying and repairing equipment related process problems., • Performs onsite preventative maintenance, clean equipment as required and verify the operational quality of equipment., • Performs start-up, warranty, paid service, and service contract activities. Performs hardware set-up on specified systems within established time frames., • Keeps Management informed of down situations. Documents, logs, and reports activities as required., • Troubleshoots and corrects process variations on systems. Diagnoses sources of hardware or process problems on equipment, facilities, or wafers., • Participates in local customer meetings and communicates orally with customers in face-to-face, one-on-one settings, group settings and communicates professionally by email and telephone, as needed., • Prepares and submits all required paperwork on a timely, routine basis., • Maintains all assigned equipment logs and records promptly and thoroughly., • Records activities clearly in written pass down and communicates clearly face to face when handing work off to oncoming shift., • Complies with all OSHA and Customer Safety requirements. Stays current all prescribed and recurrent training courses for EVG and Customer to maintain uninterrupted access to customer site., • Works overtime and/or travel on short notice, including unscheduled callouts from home and other shifts, as needed., • Must be able to travel domestically and internationally overnight, as needed, up to 20% of the time. Must possess a valid passport., • This position requires the use of EVG hired vehicles on EVG business. Individuals must be physically capable of operating the vehicles safely, possess a valid driver’s license and have acceptable driving privileges., • Trains other Field Service Engineers on specific product lines and company software (timecards, expense reporting, drawings, parts), • Assists and completes onsite equipment installations or complex retrofits on equipment and obtains Final Acceptance by the customer., • Ability to utilize training skills to troubleshoot tools to resolve issues and minimize downtime. Keeps equipment running properly and efficiently to enhance customer satisfaction., • Other duties, as assigned. Additional Duties and Responsibilities: • Initiates purchase orders for parts and service., • Maintains and performs repairs on company demo cleanroom equipment., • Keeps informed and trained on company’s most current systems, methods, and procedures, including site safety., • Demonstrates excellent customer service skills (foreign and domestic)., • Exhibits good housekeeping practices in all work areas. Qualifications / Education / Skills and Experience: • This position requires an associate degree or bachelor’s degree in a related engineering field plus two (2) years of experience or up to four (4) years of experience installing/repairing semiconductor/electronic production equipment., • Advanced electromechanical troubleshooting skills., • Knowledge of quality improvement process methods and terminology., • Ability to identify and solve advanced process-related system problems., • Ability to communicate and demonstrate professional conduct with all levels of customers, management, and coworkers., • Must have advanced PC skills (Windows, MSOffice suite)., • Kepner-Tregoe Problem Solving and Decision Making training, preferred. Physical Demands: • While performing duties of this job, individual is regularly required to stand, sit, reach with hand and arms, stoop, kneel, crouch, crawl and lift/move up to 50 pounds. Visual acuity required. Individual is required to use hands to finger, handle or feel objects, tools, or controls frequently and be able to reach with hand and arms above shoulder level occasionally., • Ability to wear proper cleanroom attire and work inside the fab/cleanroom up to 75% of the time. This job description in no way states or implies that these are the only duties to be performed by the employee in this position. Employee will be required to follow any other job-related instructions and to perform any other job-related duties requested by any person authorized to give instructions or assignments.

Job Description Job Description We are seeking a Data Center Design Engineer to oversee new common system and infrastructure of installation / capacity augment projects. The candidate would be responsible for monthly common system capacity reporting for assigned facilities and day to day maintenance and PMs of assigned FirstLight facilities. This role has combined responsibility for data center process and compliance activities. The expectation is that the Data Center/Facilities engineer would oversee common systems, operations and maintenance of FirstLight facilities. They will coordinate projects with the Facilities Director, department managers and project managers. The duties listed require strict adherence to budgets and formal bid process. Job requirements include (but are not limited to): The main job function along with the facilities engineer responsibilities is to take a data center expansion project - designing, costing and construction of the new space. • Take a raw space and make it a colocation data center room., • Design, • Floor, • Ceiling, • Power, • Cooling, • Generator backup, • Switchgear, • Fire protection, • Bid process, • Construction, • Final turnup, • Responsible for maintenance and installation activities on major network infrastructure components, • Coordination and oversight of purchasing, installation, repair, and routine maintenance for each assigned facilities asset, • Coordination of internal resources, contractors/vendors for existing facilities and new construction, cabinet installations and service cross connections, • Monthly common system capacity reporting for assigned facilities, • SP Marketplace documentation of All Facilities / assets assigned, • Works with Network Design Engineering to facilitate clean SOW packages, Understands power and grounding, HVAC / UPS architecture fundamentals, • Network Facilities Technician must understand access procedures for all relevant sites under their area of operation, • Preventative maintenance / reporting for infrastructure components i.e., HVAC, Emergency Generators, transfer switching, remote gen set operation, maintenance, and interface connections, • Network Facilities Engineer has oversight of contract labor for end-to-end installation, test, turn-up, and maintenance of all infrastructure and common systems related projects, • Be available as Essential Personnel in emergency scenarios, • When necessary, assist Field Operations installation tasks, • Completes special projects and other duties as assigned, • Proficiency with SP Marketplace essential, • Basic understanding of test equipment i.e., Power/grounding / HVAC / UPS, all related / required testing equipment to conduct and troubleshoot the FirstLight infrastructure, • Ability to read and understand CLR’s, Floor plan diagrams and one line power diagrams, • Knowledge of inventory control protocols, • Experience in troubleshooting process [i.e. point to point analysis], • Knowledge of AC/DC power architecture and operational fundamentals, • Familiarity with industry standard installation practices [lacing and sewing, planning for network installations, ordering and gathering equipment, verifying and testing circuits, equipments and alarms] FirstLight, headquartered in Albany, New York, provides fiber-optic data, Internet, data center, cloud and voice services to enterprise and carrier customers throughout the Northeast connecting more than 13,000 locations in service with more than 125,000 locations serviceable by our more than 25,000-route mile network. FirstLight offers a robust suite of advanced telecommunications products featuring a comprehensive portfolio of high bandwidth connectivity solutions including Ethernet, wavelength, and dark fiber services as well as dedicated Internet access solutions, data center, cloud and voice services. FirstLight’s clientele includes national cellular providers and wireline carriers and many leading enterprises, spanning high tech manufacturing and research, hospitals and healthcare, banking and financial, secondary education, colleges and universities, and local and state governments. FirstLight Fiber is an equal opportunity employer. In accordance with state and federal laws, FirstLight’s equal opportunity policy is that all applicants and employees are treated equally by the company with respect to employment opportunities, regardless of race, color, religion, sex, sexual orientation, disability, or veteran status or veteran disability.

Job Description At E Tech Group, joining our team means joining a group of passionate and forward-thinking experts. We're one of the largest engineering and system integration firms in the United States providing value for our clients through IT automation and control solutions for more than 30 years to the Life Sciences, Mission Critical, Metals & Mining, Warehousing & Distribution, and CPG/Food & Beverage industries. Our national scale allows us to help our clients develop and implement standardized solutions at any of their facilities regardless of physical location or the local resources available at that site. We are seeking a Engineer I (Controls/Automation focus) to work within a project team to develop, program, and commission Rockwell PLCs and HMI software. You Will: • Automate engineering design, programming, and testing for configuration of Rockwell PLCs and HMI software, • Independently provide project support activities such as detailed design, design review, implementation, program changes, testing/debug, and troubleshooting, • Work Schedule is 3rd shift (Midnight to 10AM), but you can transfer to another shift after 24 months, • Work Week consists of four days on and 3 days off (4 10s). One of the days will fall on a weekend, • Associate's Degree in Engineering, • Minimum of 2 years of automation experience using Rockwell PLCs and HMI software, • Experience in the Life Science Industry a plus, • 401k + match + prompt enrollment. E Tech Group employees are 100% vested upon entry, • Prompt enrollment into Medical, Dental, and Vision benefits, • Generous paid time off that includes paid vacation, paid holidays, paid family leave and personal/sick time off E Tech Group is an Equal Opportunity / Affirmative Action Employer. Applicants are considered for employment without regard to race, color, religion, sex, age, disability, military status, genetic information, gender identity, sexual orientation, citizenship status, or any other basis prohibited by law. E Tech Group will provide reasonable accommodations to qualified individuals with disabilities and for religious beliefs. #BB-LI1

Job Description We are currently hiring a mid-level Mechanical Engineer in our Building Engineering Division – Energy team. LaBella’s Energy team provides comprehensive energy efficiency and renewable energy consultancy, including feasibility analyzes, design, and commissioning services. Our engineers are well-versed in all aspects of building and energy systems design relating to a variety of new construction, renovations, and design/build projects for a variety of clientele. The Mechanical Engineer will work with our engineers in a lead role on a variety of decarbonization/electrification projects to develop projects in feasibility stages all the way through design and construction. A successful candidate will be able to work well in a team, mentor junior engineers, and communicate effectively with clients. Duties • Lead design of building HVAC systems and district energy systems, • Field investigations to document existing conditions, • Selection and calculations for design purposes, • Work with Jr Engineers to develop and review project drawings and documentation, • Interact directly with clients by completing analysis of design options, cost benefit comparisons, and communicating results to assist in decision making process., • Ensure compliance with applicable codes, standards, and utility requirements Salary Range: $80,000 - $120,000 per year The specific salary offered may be influenced by a variety of factors including but not limited to the candidate's relevant experience, education, and work location. Requirements • 4-8 years of relevant experience, • Bachelor’s degree in Mechanical Engineering is preferred, • Well-rounded experience in HVAC and hydronic system design, • Designing geothermal or district energy systems experience preferred, • Experience with Revit or AutoCAD, • New York State Professional Engineer’s license is a plus Body, mind, and wallet—LaBella’s benefits support a holistic approach to your health and wellness, creating the foundation for physical, mental, and financial well-being. Our benefit offerings cover the must-haves (healthcare and retirement), the just-in-cases (insurances and employee assistance programs), and the cherry-on-tops (fitness reimbursements, year-end incentive pay, and tuition assistance). Visit our website for more details on benefits listed below. • Flexible Work Schedule, • Health/Dental Insurance, • 401k Plan with Employer Match, • Short & Long Term Disability, • Profit Sharing, • Paid Time Off, • Leadership Development Program, • Fitness Reimbursement, • Tuition Reimbursement, • Referral Bonus Program, • Wellness Program, • Team Building Events, • Community Service Events

Job DescriptionDiscovery IT System AdministratorEmployment Type: Full-Time, Executive-LevelDepartment: Legal CGS is seeking a dedicated Discovery IT System Administrator to join a fast-paced and hard-working team to assist with any legal accounts. As a Discovery IT System Administrator, you will play a key role in supporting various aspects of the company's portfolio. CGS brings motivated, highly skilled, and creative people together to solve the government’s most dynamic problems with cutting-edge technology. To carry out our mission, we are seeking candidates who are excited to contribute to government innovation, appreciate collaboration, and can anticipate the needs of others. Here at CGS, we offer an environment in which our employees feel supported, and we encourage professional growth through various learning opportunities. Skills and attributes for success:The Contractor shall provide the following services to include but not limited to: - Contractor shall ensure the day-day availability of electronic discovery applications and related tools; - Contractor shall administer and monitor all installed systems and infrastructure, install, configure, test and maintain operating systems, application software and system management tools; - Contractor shall monitor and test application performance for potential bottlenecks, identify possible solutions, and work with vendors and developers to implement fixes; - Contractor shall maintain security, backup, and redundancy strategies; - Contractor shall assist technical architecture design discussions; - Contractor shall liaise with vendors on behalf of OGC to address product issues; - Contractor shall develop and provide training for the end-users; - Contractor shall provide general support, subject matter expertise and advice on the use of electronic discovery tools and applications; - Contractor shall reverse engineer and document the as-is architecture of existing legacy applications or systems; - Contractor shall analyze capabilities, interview and collect business requirements and translate it into technical requirements; - Contractor shall support the discovery application integration/migration activities; - Contractor shall contribute to the Knowledge Management databases by creating and improving technical knowledge articles to assist in future resolution of issues; - Contractor shall have legal technology experience and knowledge of the EDRM; - Contractor shall assist in the implementation of e-discovery tools ( i.e. Relativity, Veritas eDP, or other review platform applications hosted in the cloud environment; - Contractor shall have the skills, knowledge and abilities to support backend infrastructure, data migrations, application installation, management and configuration; - Contractor shall have the ability to install, operate, and manage Microsoft server 2019/2022 and Microsoft SQL Server 2019/2022; - Contractor shall have ability to operate, and manage cloud technologies to include Microsoft Azure, Amazon AWS, VMware, Azure servers, Azure Functions, and Azure API Gateways and/or AWS EC2 servers, AWS Lambda and AWS API Gateways; - Contractor shall have ability to operate and manage relational databases, MySQL and/or SQL Server 2012 or higher. Our Commitment:Contact Government Services (CGS) strives to simplify and enhance government bureaucracy through the optimization of human, technical, and financial resources. We combine cutting-edge technology with world-class personnel to deliver customized solutions that fit our client’s specific needs. We are committed to solving the most challenging and dynamic problems. For the past seven years, we’ve been growing our government-contracting portfolio, and along the way, we’ve created valuable partnerships by demonstrating a commitment to honesty, professionalism, and quality work.Here at CGS we value honesty through hard work and self-awareness, professionalism in all we do, and to deliver the best quality to our consumers mending those relations for years to come. We care about our employees. Therefore, we offer a comprehensive benefits package.- Health, Dental, and Vision- Life Insurance- 401k- Flexible Spending Account (Health, Dependent Care, and Commuter)- Paid Time Off and Observance of State/Federal Holidays Contact Government Services, LLC is an Equal Opportunity Employer. Applicants will be considered without regard to their race, color, religion, sex, sexual orientation, gender identity, national origin, disability, or status as a protected veteran. Join our team and become part of government innovation!Explore additional job opportunities with CGS on our Job Board: more information about CGS please visit: or contact:Phone: +1 (888) 680-5916Email: #CJ We may use artificial intelligence (AI) tools to support parts of the hiring process, such as reviewing applications, analyzing resumes, or assessing responses. These tools assist our recruitment team but do not replace human judgment. Final hiring decisions are ultimately made by humans. If you would like more information about how your data is processed, please contact us.

Job Description MEP Mechanical Engineer (HVAC / Plumbing) HVAC Design- Plumbing Design- MEP Engineering- Mechanical Engineering Design Our client is a multi-disciplinary MEP engineering firm specializing in delivering innovative, sustainable, and cost-effective design solutions for commercial, institutional, healthcare, and industrial projects is seeking a Mechanical Engineer to join the growing team in a full-time permanent staff capacity to contribute to the design and coordination of building HVAC and/or Plumbing systems. Responsibilities • Develop HVAC and plumbing system designs, including load calculations, equipment selection, ductwork/piping layouts, and system sizing., • Prepare detailed drawings, specifications, and construction documents using AutoCAD and/or Revit., • Perform energy code and building code compliance checks., • Conduct site visits, field surveys, and construction inspections to verify installations., • Collaborate closely with architects, electrical engineers, structural engineers, and contractors to ensure coordinated MEP designs., • Support project managers in meeting deliverables, budgets, and schedules., • Assist in preparing proposals, cost estimates, and technical reports., • Provide guidance to junior engineers and designers; review and check their work., • Stay current with industry standards, codes, and emerging technologies., • Participate in design meetings with clients and stakeholders., • Respond to RFIs, review shop drawings, and resolve technical issues during construction. Qualifications • Bachelor’s degree in Mechanical Engineering or related field., • 4–8 years of experience in HVAC and/or plumbing system design within an MEP consulting or design/build environment., • EIT required; PE license (or ability to obtain within 1–2 years) preferred., • Proficiency in AutoCAD and Revit MEP., • Familiarity with energy modeling software (e.g., Trane Trace, Carrier HAP) is a plus., • Strong knowledge of building codes and standards: IMC, IPC, ASHRAE, NFPA, IECC., • Excellent communication, organizational, and problem-solving skills. Ability to work independently while also thriving in a collaborative team environment. Alex Showers Liberty Personnel Services #ConsultingEngineering #Midsenior #LI-Hybrid #LI-AS1 Key Words: (Mechanical Design Engineer, HVAC Engineer, MEP, Mechanical Consulting Engineer, Plumbing Design, Plumbing Engineer, Revit, AutoCAD, EIT, PE, Professional Engineer, Engineer in Training) Company DescriptionLibertyjobs.com has become an essential destination site for experienced job seekers. Our recruiters are continually posting active job openings to the website. Feel free to search our database of open positions and apply for your next career move! Hundreds of new jobs are listed on the site every month in a wide range of industries and locations. Last year we had over 900,000 unique job seekers visit our website, which means over 75,000 skilled job seekers search our openings every month. Established in 2003, Liberty Personnel quickly grew into one of the largest technical recruiting agencies on the East Coast. Today, Liberty Personnel has a national presence and a diverse client base. Listed below are a number of the industries and openings we work on: Information Technology, Software Programmers, Engineering, Manufacturing, Legal, Plant Maintenance, Construction, Oil and Gas, Medical Communications, Accounting, Finance, Electronics, Scientific, Medical Device, Sales, Pharmaceutical, Admin, Automation, Controls, Civil, HVAC, Wastewater, Structural, Electrical, Chemists, Validations, Logistics, Food Production, Renewable Energy and Machinists.Libertyjobs.com has become an essential destination site for experienced job seekers. Our recruiters are continually posting active job openings to the website. Feel free to search our database of open positions and apply for your next career move!\n\nHundreds of new jobs are listed on the site every month in a wide range of industries and locations. Last year we had over 900,000 unique job seekers visit our website, which means over 75,000 skilled job seekers search our openings every month.\n\nEstablished in 2003, Liberty Personnel quickly grew into one of the largest technical recruiting agencies on the East Coast. Today, Liberty Personnel has a national presence and a diverse client base. Listed below are a number of the industries and openings we work on:\n\nInformation Technology, Software Programmers, Engineering, Manufacturing, Legal, Plant Maintenance, Construction, Oil and Gas, Medical Communications, Accounting, Finance, Electronics, Scientific, Medical Device, Sales, Pharmaceutical, Admin, Automation, Controls, Civil, HVAC, Wastewater, Structural, Electrical, Chemists, Validations, Logistics, Food Production, Renewable Energy and Machinists.

Job DescriptionSenior Veritas eDiscovery Platform (eDP) EngineerEmployment Type: Full-Time, Executive-LevelDepartment: Legal CGS is seeking a dedicated Senior Veritas eDiscovery Platform (eDP) Engineer to join a fast-paced and hard-working team to assist with any legal accounts. As a Veritas eDiscovery Platform (eDP) Engineer, you will play a key role in supporting various aspects of the company's portfolio. CGS brings motivated, highly skilled, and creative people together to solve the government’s most dynamic problems with cutting-edge technology. To carry out our mission, we are seeking candidates who are excited to contribute to government innovation, appreciate collaboration, and can anticipate the needs of others. Here at CGS, we offer an environment in which our employees feel supported, and we encourage professional growth through various learning opportunities. Skills and attributes for success:Personnel assigned to this task must have the ability to adjust to changing priorities and work well under pressure. In addition, personnel may provide support along with OGC, to other FBI Divisions, such as CTD. At the Government’s discretion, available funding, and need this position will support Criminal Discovery Program. The Senior Veritas eDiscovery Platform is hosted on physical and virtualized Windows Servers and therefore requires the Contractor to provide a wide range of support tasks including but not limited to: - Contractor shall participate in teleconferences or technical meetings to review, educate, and support program objectives; - Contractor shall perform configurations, maintenance, monitoring, and troubleshooting using current engineering documentation; - Contractor shall record configurations change requests through the established change control board; - Contractor shall process storage requests, migrations and decommission tasks; - Contractor shall monitor failed system components and coordinate logistics, vendor support, and site support as needed;- Contractor shall respond to monitoring alerts and warnings with prompt corrective actions and escalations; - Contractor shall complete all scheduled maintenance in accordance with established policies and procedures; - Contractor shall prevent data loss or storage system outages by exercising a high level of attention to detail during maintenance; - Contractor shall manage technology in remote environments; - Contractor shall review and process tickets related to supported system according to the established service level agreements tracked within the service manager database; - Contractor shall provide initial response, Level 1 and Level 2 escalation for outages; - Contractor shall schedule maintenance actions in a timely manner; - Contractor shall create Power Shell and VBS scripts as needed to automate routine maintenance tasks; - Contractor shall perform daily system monitoring, verifying the integrity and availability of all hardware, server resources, and systems; - Contractor shall review system and application logs to verify completion of scheduled jobs such as backups; - Contractor shall apply OS patches and upgrades on a regular basis; upgrade administrative tools and utilities; upgrade end user applications; - Contractor shall configure / add new services as necessary; - Contractor Shall facilitate the migration of the system implementation into cloud infrastructures. - Contractor shall research and recommend innovative, and where possible automated approaches for system administration tasks; - Contractor shall prepare and review technical assessments to include required tasks, estimated time frames, and effort for any scope project; Our Commitment:Contact Government Services (CGS) strives to simplify and enhance government bureaucracy through the optimization of human, technical, and financial resources. We combine cutting-edge technology with world-class personnel to deliver customized solutions that fit our client’s specific needs. We are committed to solving the most challenging and dynamic problems. For the past seven years, we’ve been growing our government-contracting portfolio, and along the way, we’ve created valuable partnerships by demonstrating a commitment to honesty, professionalism, and quality work.Here at CGS we value honesty through hard work and self-awareness, professionalism in all we do, and to deliver the best quality to our consumers mending those relations for years to come. We care about our employees. Therefore, we offer a comprehensive benefits package.- Health, Dental, and Vision- Life Insurance- 401k- Flexible Spending Account (Health, Dependent Care, and Commuter)- Paid Time Off and Observance of State/Federal Holidays Contact Government Services, LLC is an Equal Opportunity Employer. Applicants will be considered without regard to their race, color, religion, sex, sexual orientation, gender identity, national origin, disability, or status as a protected veteran. Join our team and become part of government innovation!Explore additional job opportunities with CGS on our Job Board: more information about CGS please visit: or contact:Phone: +1 (888) 680-5916Email: #CJ We may use artificial intelligence (AI) tools to support parts of the hiring process, such as reviewing applications, analyzing resumes, or assessing responses. These tools assist our recruitment team but do not replace human judgment. Final hiring decisions are ultimately made by humans. If you would like more information about how your data is processed, please contact us.

Job DescriptionSenior Discovery IT System AdministratorEmployment Type: Full-Time, Executive-LevelDepartment: Legal CGS is seeking a dedicated Senior Discovery IT System Administrator to join a fast-paced and hard-working team to assist with any legal accounts. As a Senior Discovery IT System Administrator, you will play a key role in supporting various aspects of the company's portfolio. CGS brings motivated, highly skilled, and creative people together to solve the government’s most dynamic problems with cutting-edge technology. To carry out our mission, we are seeking candidates who are excited to contribute to government innovation, appreciate collaboration, and can anticipate the needs of others. Here at CGS, we offer an environment in which our employees feel supported, and we encourage professional growth through various learning opportunities. Skills and attributes for success:The Contractor shall provide the following services to include but not limited to: - Contractor shall ensure the day-day availability of electronic discovery applications and related tools; - Contractor shall administer and monitor all installed systems and infrastructure, install, configure, test and maintain operating systems, application software and system management tools; - Contractor shall monitor and test application performance for potential bottlenecks, identify possible solutions, and work with vendors and developers to implement fixes; - Contractor shall maintain security, backup, and redundancy strategies; - Contractor shall assist technical architecture design discussions; - Contractor shall liaise with vendors on behalf of OGC to address product issues; - Contractor shall develop and provide training for the end-users; - Contractor shall provide general support, subject matter expertise and advice on the use of electronic discovery tools and applications; - Contractor shall reverse engineer and document the as-is architecture of existing legacy applications or systems; - Contractor shall analyze capabilities, interview and collect business requirements and translate it into technical requirements; - Contractor shall support the discovery application integration/migration activities; - Contractor shall contribute to the Knowledge Management databases by creating and improving technical knowledge articles to assist in future resolution of issues; - Contractor shall have legal technology experience and knowledge of the EDRM; - Contractor shall assist in the implementation of e-discovery tools ( i.e. Relativity, Veritas eDP, or other review platform applications hosted in the cloud environment; - Contractor shall have the skills, knowledge and abilities to support backend infrastructure, data migrations, application installation, management and configuration; - Contractor shall have the ability to install, operate, and manage Microsoft server 2019/2022 and Microsoft SQL Server 2019/2022; - Contractor shall have ability to operate, and manage cloud technologies to include Microsoft Azure, Amazon AWS, VMware, Azure servers, Azure Functions, and Azure API Gateways and/or AWS EC2 servers, AWS Lambda and AWS API Gateways; - Contractor shall have ability to operate and manage relational databases, MySQL and/or SQL Server 2012 or higher. Our Commitment:Contact Government Services (CGS) strives to simplify and enhance government bureaucracy through the optimization of human, technical, and financial resources. We combine cutting-edge technology with world-class personnel to deliver customized solutions that fit our client’s specific needs. We are committed to solving the most challenging and dynamic problems. For the past seven years, we’ve been growing our government-contracting portfolio, and along the way, we’ve created valuable partnerships by demonstrating a commitment to honesty, professionalism, and quality work.Here at CGS we value honesty through hard work and self-awareness, professionalism in all we do, and to deliver the best quality to our consumers mending those relations for years to come. We care about our employees. Therefore, we offer a comprehensive benefits package.- Health, Dental, and Vision- Life Insurance- 401k- Flexible Spending Account (Health, Dependent Care, and Commuter)- Paid Time Off and Observance of State/Federal Holidays Contact Government Services, LLC is an Equal Opportunity Employer. Applicants will be considered without regard to their race, color, religion, sex, sexual orientation, gender identity, national origin, disability, or status as a protected veteran. Join our team and become part of government innovation!Explore additional job opportunities with CGS on our Job Board: more information about CGS please visit: or contact:Phone: +1 (888) 680-5916Email: #CJ We may use artificial intelligence (AI) tools to support parts of the hiring process, such as reviewing applications, analyzing resumes, or assessing responses. These tools assist our recruitment team but do not replace human judgment. Final hiring decisions are ultimately made by humans. If you would like more information about how your data is processed, please contact us.

Job Description Employment Type: Full-Time FSLA: Salary/Exempt Division: Project Management Department: Project Management Reports to: Senior Project Manager / Project Executive / Director, Project Executive Supervisory Duties: Yes Salary Range: $77,000 - $83,000 The Project Engineer (PE) will be primarily responsible for obtaining, distributing and reporting on critical project information to the project stakeholders. In this role, the PE will coordinate with subcontractors, vendors and consultants. The PE is the on-site expert on the status of submittals, Request for Information (RFIs), materials, safety documentation, drawing updates, and all other relevant project documents. PEs participate in the Consigli Project Engineer Academy, a year-long program designed to give our PEs a leg up in the industry through expert training and continuous development. Through this program, new PEs will gain pertinent industry knowledge and skills while also building their network within Consigli through interactive group activities. Responsibilities / Essential Functions • Document Control – Ensure timely and accurate management of all project documentation:, • Distribute all design changes/updates to the entire project team and all subcontractors., • RFIs: Prepare and submit requests for information to the design team and distribute all responses to the appropriate parties., • Submittals: Create and manage the submittal log for the project. Obtain required submittals from subcontractors, review for compliance with the specifications and submit to the design team for review via Procore system software., • Safety Documentation: Upload subcontractor safety documentation to Procore. Notify subcontractors of missing paperwork and follow up until it is provided. Conduct safety walk-throughs with Superintendent and Safety Manager., • Enrollment, and compliance tracking of subcontractor insurance certificates., • Field Reporting: Ensure field activities are tracked and reported to related parties., • Punch List: Upload and distribute the punch list through Procore to subcontractors. Assist with coordinating work completion as required and maintain an accurate log of items to be completed., • Observations and Field Reports: work with project team to conduct field walks as necessary and compile any corresponding documentation accordingly. Review Design Team field reports and work with required parties to resolve open items and drive resolution., • Safety: perform regular safety walks with field and safety staff and record observations., • Photos: track project progress with photos of the job site on a regular basis. Photos shall be tagged and uploaded to Procore., • Material Delivery: Thorough knowledge of anticipated delivery dates for materials and equipment to the site., • Create, update and maintain an accurate material delivery log for all materials and equipment on the project., • Obtain current information from subcontractors on a consistent basis regarding the status of their materials and when they are expected onsite., • Ensure timely communication of potential delays to the entire project team., • Understand and communicate long lead item impacts to the design team during the submittal review process and request expediting of submittal review where required., • Material verification on-site: confirm the delivered material corresponds to the submitted material to avoid potential field issues., • Project Meetings:, • Generate and update agendas for the various project meetings with input from the project team., • Track project meeting commitments and action items and distribute minutes to project stakeholders in a timely manner., • Reporting: report on, at a minimum, submittals, RFI’s and critical project issues., • Coordinate and support pre-job and subcontractor safety and quality meetings., • Collaboration and Coordination:, • Interface with client and design team throughout the entire project., • Develop relationships with all stakeholders on the project., • Collaborate with the other team members in establishing and implementing project goals., • Management and inventory of job site office consumables., • Communicate with subcontractors on a daily basis. Key Skills • Strong ability to work within a team environment., • Persistence and strong initiative., • Excellent organizational skills, • Time management/prioritization., • Strong communication skills (written and oral)., • Flexibility and willingness to learn., • Critical thinking and desire to solve problems. Required Experience • A bachelor's degree in engineering, Construction Management or Architecture preferred., • Prior internship experience is a plus., • Basic understanding of construction including schedule logic, budgets and project documentation., • Microsoft Office proficiency is required., • OSHA 10 Hour and OSHA 30 preferred., • Additional experience may include cost management software (Timberline, Sage preferred), scheduling software (Primavera P6 preferred) and construction management software (Procore preferred).

Job DescriptionCloud and Storage Engineer Employment Type: Full-Time, Experienced Department: Information technology CGS is seeking a Cloud and Storage Engineer to develop and implement full-scale Storage Area Network (SAN) architecture for a large EMC-based SAN infrastructure in support of a large federal agency. The ideal candidate will be able to excel in a fast-paced environment and successfully produce standards and implementation processes for storage configuration, optimization, replication, and storage security. CGS brings motivated, highly skilled, and creative people together to solve the government’s most dynamic problems with cutting-edge technology. To carry out our mission, we are seeking candidates who are excited to contribute to government innovation, appreciate collaboration, and can anticipate the needs of others. Here at CGS, we offer an environment in which our employees feel supported, and we encourage professional growth through various learning opportunities. Skills and attributes for success:- Develops and implements full scale Storage Area Network (SAN) architecture for a large EMC-based SAN infrastructure in a multi-enterprise, complex, geographically dispersed solution; ranging from single servers to multi-tier, multi-platform solutions connected through fiber channel to multiple EMC Storage Arrays with petabytes of storage capacity. - The SAN architecture considers the following aspects relating to SAN: performance, capacity, replication, disaster recovery, backup disk storage, and backup & recovery.- Defines and sets a strategic direction for the SAN and backup environment. - Designs and implements customer storage requirements into an enterprise solution that will be developed, installed, configured, and deployed in the environment. - Provides overall storage and backup capacity planning, and utilization reporting. - Produces standards and implementation processes for storage configuration, optimization, replication, virtualization, storage security, and disaster recovery.- Troubleshoots complex SAN infrastructure issues and works with customers both internal and external to effectively resolve issues.- Reviews, plans, and participates in executing regularly scheduled maintenances and/or projects on the storage infrastructure. - Develops technical documentation, tiered storage and storage-as-a-service roadmaps, presentations, and cost models.- Responsible for managing, maintaining, and developing the SAN infrastructure as part of a team to ensure 24/7/365 uptime. - Architects and maintains private cloud environment. Professional experience with Gov Cloud (AWS, Azure, etc.) and hybrid cloud architectures desired. - Performs security related tasks which include, but are not limited to, documentation, vulnerability scan review, assessment support, patch management, and auditing as required. Qualifications:- Bachelor’s in computer science, business, or other relevant discipline.- Eight (8) years of relevant work experience may be substituted for degree requirement.- Must have significant, direct experience in Dell EMC products such as OneFile System (OneFS), MDS SAN switches, storage arrays (Unity, Isilon, VNS, and Data Domain), and RecoverPoint. Our Commitment:Contact Government Services (CGS) strives to simplify and enhance government bureaucracy through the optimization of human, technical, and financial resources. We combine cutting-edge technology with world-class personnel to deliver customized solutions that fit our client’s specific needs. We are committed to solving the most challenging and dynamic problems. For the past seven years, we’ve been growing our government-contracting portfolio, and along the way, we’ve created valuable partnerships by demonstrating a commitment to honesty, professionalism, and quality work. Here at CGS we value honesty through hard work and self-awareness, professionalism in all we do, and to deliver the best quality to our consumers mending those relations for years to come. We care about our employees. Therefore, we offer a comprehensive benefits package.- Health, Dental, and Vision- Life Insurance- 401k- Flexible Spending Account (Health, Dependent Care, and Commuter)- Paid Time Off and Observance of State/Federal Holidays Contact Government Services, LLC is an Equal Opportunity Employer. Applicants will be considered without regard to their race, color, religion, sex, sexual orientation, gender identity, national origin, disability, or status as a protected veteran. Join our team and become part of government innovation! Explore additional job opportunities with CGS on our Job Board: For more information about CGS please visit: or contact:Email: #CJ We may use artificial intelligence (AI) tools to support parts of the hiring process, such as reviewing applications, analyzing resumes, or assessing responses. These tools assist our recruitment team but do not replace human judgment. Final hiring decisions are ultimately made by humans. If you would like more information about how your data is processed, please contact us.

Job DescriptionSenior Veritas Enterprise Vault Engineer Employment Type: Full-Time, Executive-LevelDepartment: Legal CGS is seeking a dedicated Senior Veritas Enterprise Vault Engineer to join a fast-paced and hard-working team to assist with any legal accounts. As a Veritas Enterprise Vault Engineer, you will play a key role in supporting various aspects of the company's portfolio. CGS brings motivated, highly skilled, and creative people together to solve the government’s most dynamic problems with cutting-edge technology. To carry out our mission, we are seeking candidates who are excited to contribute to government innovation, appreciate collaboration, and can anticipate the needs of others. Here at CGS, we offer an environment in which our employees feel supported, and we encourage professional growth through various learning opportunities. Skills and attributes for success:The Enterprise Vault is hosted on physical and virtualized Windows Servers and therefore requires the Contractor to provide a wide range of support tasks including but not limited to: - Contractor shall participate in teleconferences or technical meetings to review, educate, and support program objectives; - Contractor shall perform configurations, maintenance, monitoring, and troubleshooting using current engineering documentation; - Contractor shall record configurations change requests through the established change control board; - Contractor shall process storage requests, migrations and decommission tasks; - Contractor shall monitor failed system components and coordinate logistics, vendor support, and site support as needed; - Contractor shall respond to monitoring alerts and warnings with prompt corrective actions and escalations; - Contractor shall complete all scheduled maintenance in accordance with established policies and procedures; - Contractor shall prevent data loss or storage system outages by exercising a high level of attention to detail during maintenance; - Contractor shall manage technology in remote environments; - Contractor shall review and process tickets related to supported system according to the established service level agreements tracked within the service manager database; - Contractor shall provide initial response, Level 1 and Level 2 escalation for outages; - Contractor shall schedule maintenance actions in a timely manner; - Contractor shall create Power Shell and VBS scripts as needed to automate routine maintenance tasks; - Contractor shall facilitate the migration of system into cloud infrastructure; - Contractor shall perform daily system monitoring, verifying the integrity and availability of all hardware, server resources, and systems; - Contractor shall review system and application logs to verify completion of scheduled jobs such as backups; - Contractor shall apply OS patches and upgrades on a regular basis; upgrade administrative tools and utilities; upgrade end user applications; - Contractor shall configure / add new services as necessary; - Contractor shall research and recommend innovative, and where possible automated approaches for system administration tasks; - Contractor shall prepare and review technical assessments to include required tasks, estimated time frames, and effort for any scope project; - Contractor shall provide before/ or after core hour work as required. Our Commitment:Contact Government Services (CGS) strives to simplify and enhance government bureaucracy through the optimization of human, technical, and financial resources. We combine cutting-edge technology with world-class personnel to deliver customized solutions that fit our client’s specific needs. We are committed to solving the most challenging and dynamic problems. For the past seven years, we’ve been growing our government-contracting portfolio, and along the way, we’ve created valuable partnerships by demonstrating a commitment to honesty, professionalism, and quality work.Here at CGS we value honesty through hard work and self-awareness, professionalism in all we do, and to deliver the best quality to our consumers mending those relations for years to come. We care about our employees. Therefore, we offer a comprehensive benefits package.- Health, Dental, and Vision- Life Insurance- 401k- Flexible Spending Account (Health, Dependent Care, and Commuter)- Paid Time Off and Observance of State/Federal Holidays Contact Government Services, LLC is an Equal Opportunity Employer. Applicants will be considered without regard to their race, color, religion, sex, sexual orientation, gender identity, national origin, disability, or status as a protected veteran. Join our team and become part of government innovation!Explore additional job opportunities with CGS on our Job Board: more information about CGS please visit: or contact:Phone: +1 (888) 680-5916Email: #CJ We may use artificial intelligence (AI) tools to support parts of the hiring process, such as reviewing applications, analyzing resumes, or assessing responses. These tools assist our recruitment team but do not replace human judgment. Final hiring decisions are ultimately made by humans. If you would like more information about how your data is processed, please contact us.

Job Description We are currently looking for a Power Systems Engineer with a minimum of 5 years of experience in protection and control system design, power system analysis, cost estimating, and bidding document preparation for commercial, industrial, generation and renewables. Typical system voltage levels range from 138 kV to 2.4kV. This position can be filled in any of our New York offices. The Building Engineering Division at LaBella provides complete building engineering services including mechanical, electrical, plumbing, and structural engineering. Services range from feasibility studies and analysis through project design and construction. Our engineers are well versed in new construction, renovations, additions, analysis, special structures, and design/build projects for a variety of clients. This role can accelerate your career goals through immediate opportunities to lead, and comes with a competitive starting salary, incentive compensation, a comprehensive benefit package, and opportunities to become a LaBella shareholder. Duties • Design projects working directly with clients to develop project scope, identify problems, and propose solutions., • Typical requirements include Protection and Control drawings and documentations (relay one-lines, three-lines, AC/DC schematics, I/O lists, and relay settings, configuration files and etc), panel construction specifications (panel and interconnect wiring as well as panel layouts and elevations), and other supporting documentation., • Comfortable evaluating the interoperability, control features, and communication/protocol aspects of protective relays, RTU’s, LTC Controllers, and other equipment as well as perform power system load flow studies, fault studies, relay setting coordination., • A BS in Electrical Engineering or Electrical Engineering Technology., • 5 or more years of experience in protection and control system design, cost estimating, and bidding document preparation for electrical transmission and distribution substations projects., • A PE license from a US State is desired but not required., • Successful track record designing Protection and Control Systems and performing power system studies., • Knowledge of Institute of Electrical and Electronic Engineers (IEEE), NERC, NEC, NESC, NEMA, and ANSI standards are used in designing substation is critical., • Experience with telecommunications, protective relaying, and automation (SCADA) is required., • Interest in low voltage coordination and arc flash studies., • Familiarity with Schweitzer Engineering, General Electric and Basler equipment. Salary Range: $90,000 - $135,000 per year The specific salary offered may be influenced by a variety of factors including but not limited to the candidate's relevant experience, education, and work location. Benefits Body, mind, and wallet—LaBella’s benefits support a holistic approach to your health and wellness, creating the foundation for physical, mental, and financial well-being. Our benefit offerings cover the must-haves (healthcare and retirement), the just-in-cases (insurances and employee assistance programs), and the cherry-on-tops (fitness reimbursements, year-end incentive pay, and tuition assistance). Visit our website for more details on benefits listed below. • Flexible Work Schedule, • Health/Dental Insurance, • 401k Plan with Employer Match, • Short & Long Term Disability, • Profit Sharing, • Paid Time Off, • Leadership Development Program, • Fitness Reimbursement, • Tuition Reimbursement, • Referral Bonus Program, • Wellness Program, • Team Building Events, • Community Service Events

Job Description About Sungrow: Sungrow Power Supply Co., Ltd. (Stock code: 300274) is a globally recognized renewable energy company, specializing in R&D, manufacturing, and services for solar, wind, energy storage, hydrogen, and electric vehicle solutions. Established in 1997, Sungrow is known for its innovative photovoltaic inverters, wind converters, EV chargers, energy storage systems, and hydrogen production technologies. Its products are sold in over 180 countries, with a cumulative installed capacity exceeding 740 GW by the end of 2024. Sungrow has contributed to national standards and holds numerous core technologies. With multiple industry awards and advanced R&D centers, it ranks among the global leaders in clean energy. Guided by its mission “Clean power for all,” Sungrow continues to drive innovation and global sustainability. The Position: The Electrical Engineer position is a hybrid or Onsite position depending on the department requirement, and it plays an important role with this rapidly growing company. This is a very dynamic and fast-track position reporting to the Engineering Supervisor/Manager inside the service engineering group. The position will be the key member of the service engineering team and it is a highly technical customer facing position. Essential Duties and Responsibilities: • Perform a variety of engineering assignments involving technology applications involved in the installation, operation, testing and maintenance of various solar inverters and battery storage technologies., • Perform as a lead on more complex field engineering assignments., • Interact with customers to explain the technical scope of projects., • Create and update field service procedures for troubleshooting and maintenance., • Provide training to Customers, Vendors, and Internal Personnel as a virtual team member of the training center., • Coordinate with R&D engineering in China for the generation of technical documents and training., • Responsible for the technical issues of a certain region based on the job assignment., • Lead the preparation of root cause reports to the customer., • Lead and track technical issues from customers/FST/PM/etc. on Airtable to visualize the process of the issues., • Analyze failures for trends requiring proactive actions and provide reports on findings., • Provide feedback to the R&D team on possible mechanical and electrical design improvements., • Advise, provide training on, and lead employees on various safety-related topics., • Perform electrical and electronic troubleshooting and testing of solar inverters and their components in the field or in the laboratory. Use of PQA and oscilloscope is required as needed., • Perform troubleshooting to investigate solar plant issues such as battery issues, inverter faults, inverter design issues, and utility grid transients., • Work with customer SCADA engineers to set up systems communication and parameters., • Research alternative components that can be used in the field., • Independently performs a range of field service tasks involving communication with Factory Engineering and Customer’s solar plant engineer., • Coordinate and work closely with other engineering, logistic, financial, and program management disciplines to maintain the solar/BESS plants., • Help with the repair activities in the Service center., • Prepare and submit field reports to customers and management., • Support development of technical proposals and provide comments on the technical content and level of effort of the proposed scope of work., • Conduct site visits, experimental investigations and analyze engineering problems. Propose solutions, alternatives, and provide recommendations., • Inspects working conditions to ensure all products and activities are compliant with safety guidelines., • Weekly call with Engineers from Headquarters to review the progress of the issues resolution process., • Provide details for a monthly report. Minimum Requirements: • Must possess the ability to work with test equipment and hand tools as required., • Must possess customer service, problem-solving skills, and possess decision making and analytical skills., • Must possess effective written and verbal communication skills., • Demonstrates broad knowledge of electrical and construction site safety., • Must be proficient in Microsoft Office Suite (Word, Excel, power Point and Outlook), • Must have basic knowledge of Electrical Safety Standards Education or Desired License and Certificates: • 4 years of experience in power electronics related companies as the service engineer/application engineer/R&D/Product Management or similar positions, or 2 years of experience with a Bachelor's degree or above, majoring in electrical engineering or similar majors., • Solar industry, battery industry, or power electronics experience is preferred. Competencies: • Technical problem solving/analytical skills., • Self-starter, strong initiatives, and an excellent communicator., • System and product level mindset., • Organization, detailed-oriented nature, and strong initiative., • Strong technical support focus and a service-oriented individual both with sales team and customers., • Modbus protocol knowledge is desired, but not required., • English language proficiency required., • Mandarin Chinese Proficiency desired, but not required. Travel: • 50% Work Location and Status: • Full-time role based in Philadelphia, PA, Newark, NJ, or Albany, NY areas Compensation: • Compensation commensurate with experience, • Competitive benefits package and employee programs, • Strong personal and company growth opportunities For candidates in the states of California, Colorado, New York and Washington, the anticipated annual base salary for this role is between $80,000 - $120,000 This range does not include any other compensation components or other benefits that an individual may be eligible for. The base salary offered is dependent upon several factors, including but not limited to job-related skills, qualifications, experience, education, location, or other factors related to the role. Sungrow is an equal opportunity employer. Due to strong interests in this position, Sungrow will only reach out to those candidates who best meet the requirements. Thank you for your interest in Sungrow. #LI-LV1

Job Description At E Tech Group, joining our team means joining a group of passionate and forward-thinking experts. We're one of the largest engineering and system integration firms in the United States providing value for our clients through IT automation and control solutions for more than 30 years to the Life Sciences, Mission Critical, Metals & Mining, Warehousing & Distribution, and CPG/Food & Beverage industries. Our national scale allows us to help our clients develop and implement standardized solutions at any of their facilities regardless of physical location or the local resources available at that site. We are seeking Senior Aveva PI Engineer who wants to be part of a growing business to support the design, deployment, testing, and maintenance of PI Systems. You Will: • Serve as team lead on PI System applications through installation, design, implementation and support., • Design, build, test, validate, troubleshoot and debug new and existing systems., • Commissioning of new PI systems, • Development of design documentation/testing protocols and supporting protocol executions, • Bachelor's Degree in Engineering, • 5+ years of experience designing and maintaining PI Systems, • Experience integrating PI with PLC and DCS systems, • Experience in using Asset Framework to create asset models, • Experience in using PI Vision or other tools to create displays and reports for front end users to leverage the PI Data, • Experience with PI to PI and RDBMS interfaces is a plus, • Understanding of IT systems, Automation, and network infrastructures, • Understanding of Biopharmaceutical processes is a plus, • GMP and validation experience is a plus, • Knowledge of S88 Batch standards and experience implementing batch systems is a plus, • 401k + match + prompt enrollment. E Tech Group employees are 100% vested upon entry., • Prompt enrollment into Medical, Dental, and Vision benefits., • Generous paid time off that includes paid vacation, paid holidays, paid family leave and sick time off. E Tech Group is an Equal Opportunity / Affirmative Action Employer. Applicants are considered for employment without regard to race, color, religion, sex, age, disability, military status, genetic information, gender identity, sexual orientation, citizenship status, or any other basis prohibited by law. E Tech Group will provide reasonable accommodations to qualified individuals with disabilities and for religious beliefs. #LI-SK1

Job Description We are currently hiring a Mechanical Engineer in our Building Engineering Division at our Latham, NY office. The Building Engineering Division at LaBella provides complete building engineering services including mechanical, electrical, plumbing, and structural engineering. Services range from feasibility studies and analysis through project design and construction. Our engineers are well versed in new construction, renovations, additions, analysis, special structures, and design/build projects for a variety of clients. The Mechanical Engineer will work with engineers as part of a project team to provide HVAC, plumbing, and fire protection designs, studies and technical support as required to fulfill project requirements. Typical projects will involve field work, design, and construction administration services. A successful candidate will be able to work well in a team to develop concepts, strategies, designs, drawings, specifications and reports for Building and Renovation projects. Responsibilities • System selection and calculations for design purposes, • Conduct field work to document existing conditions, • Work with Jr Engineers to develop drawings with building modeling software, • Work independently and as part of a team to complete project designs, • 4 – 6 years of experience working at an A/E consulting firm is preferred, • Bachelor’s degree in Mechanical Engineering is preferred, • Well rounded experience in HVAC, plumbing, and fire protection, • Experience with Revit or AutoCAD is preferred, • Field experience is preferred, • New York State Professional Engineer’s license is a plus Benefits Body, mind, and wallet—LaBella’s benefits support a holistic approach to your health and wellness, creating the foundation for physical, mental, and financial well-being. Our benefit offerings cover the must-haves (healthcare and retirement), the just-in-cases (insurances and employee assistance programs), and the cherry-on-tops (fitness reimbursements, year-end incentive pay, and tuition assistance). Visit our website for more details on benefits listed below. • Flexible Work Schedule, • Health/Dental Insurance, • 401k Plan with Employer Match, • Short & Long Term Disability, • Profit Sharing, • Paid Time Off, • Leadership Development Program, • Fitness Reimbursement, • Tuition Reimbursement, • Referral Bonus Program, • Wellness Program, • Team Building Events LaBella is committed to facilitating a culture where diversity, equity, and inclusion are respected, valued, and celebrated by implementing thoughtful, practical, and innovative strategies that support our employees and serve the communities in which we reside. All applicants will be considered for employment without regard to race, color, religion, age, national origin, ancestry, ethnicity, gender (including pregnancy, childbirth, breastfeeding or other related medical conditions), gender identity, gender expression, sexual orientation, marital status, veteran status, disability, genetic information, citizenship status, characteristic or membership in any other group protected by federal, state or local laws. LaBella Associates does not accept unsolicited resumes from recruiting professionals or agencies, nor do we accept resumes from any source that does not reference a specific, open position. LaBella Associates will not be responsible for any fees arising from the use of resume submitted by recruiting professionals or agencies that do not have a current placement fee agreement with LaBella Associates. All initial communication with recruiting professionals or agencies must go through human resources.

Job Description Job Title: Lab Computing Analyst Location: 101 Customer Site Street, Albany, NY 12207 Duration: 3 Months Expected Hours: 40 hours per week Work Model: Onsite Pay Rate: $33.70/hr Summary: Applies professional-level technical skill and judgment to provide non-routine technical support for computer/data center operations. Installs, configures and troubleshoots server and non-desktop computer hardware, software, systems and other resources in a data center or other centralized computer network setting. Maintains access control, data integrity and file system security for the computer/data center environment. Monitors, tracks and records system performance and utilization metrics. Communicates highly technical information to both technical and nontechnical personnel. Recommends process, hardware and software solutions, including new acquisitions and upgrades, to improve computer/data center efficiency. May participate in development of information technology and infrastructure projects. May be internal or external, client-focused, working in conjunction with Professional Services and outsourcing functions. May include company-wide, web-enabled solutions. Job Responsibilities: * Implement, monitor, and provide technical support of customer laboratory IT environments, typically integrated with instrumentation * Implement customer specified benchtop computing design and processes * Administer and assure connectivity of customer's Windows based platform * Support of the operating system, desktop hardware and peripherals, instrument-controlled software, core desktop applications and imaging of computers * Manage On-boarding, retirement, and relocation of equipment * Implement Windows based security, including but not limited to: user/group permissions, file/folder permissions, group policies, local security policies, etc. * Analyze, identify, and implement enhancements, upgrades and/or solutions to improve overall desktop platform support in a timely manner * Ensure adherence to client's corporate policies through periodic reporting and compliance programs * Act as the technical support contact for instrument vendor * Repair and troubleshoot instrument-related computers and escalate issues to the client infrastructure teams * Provide technical support for new system validations and change management efforts * Create and maintain a physical inventory of lab equipment, PCs, software, and any other information specified by the client * Submit weekly Engineer reports to the team lead by COB on the last business day of the week * Act as client Liaison for software/hardware related inquiries * Participate in client team meetings * Provide support across all Enterprise practices as required * Demonstrate appropriate use of office equipment/software after training * Maintain training and compliance in areas of health and safety, security, environmental and operational aspects of daily activities in the working environment Working Environment: * Must be able to work in a laboratory, controlled environments requiring personal protective equipment (e.g., lab coat, safety glasses, etc.) * Job pace may be fast and job completion demands may be high * Must be able to remain in a stationary position more than 25% of the time * Occasionally move between labs, corridors, adjoining rooms, and buildings onsite * Frequently operate on instruments, objects, tools or controls, requiring bending, squatting, stretching and reaching * Occasionally move or lift up to 25 pounds (potential for occasional lifting of up to 50 pounds) * Vision abilities required include close range, color vision, peripheral vision, depth perception, and ability to adjust focus * Occasionally operates a computer and other office machinery * Employee may handle hazardous waste according to local, state, and federal regulations * Potential risk to lab-based hazards including extreme temperature, biological materials, and hazardous chemicals * May be required to complete Medical Clearance, Respiratory Protection Training, and Fit Testing for respirators Must Haves: * Experience with technologies including Microsoft Office, networking, remote computing and backup systems * Experience with scientific instrumentation * Experience in Life Science environment * Experience in a validated environment * Experience working in GxP, ISO, and FDA compliant facilities * Active Directory * Folder permissions / shared drives * SCCM * Acronis * Networking-Troubleshoot skills, Ethernet cables, problem-solving skills * Zscaler * Dymo printers * Service Now * Windows 11 upgrade Nice to Haves: * Linux * Group Policy * Splunk * CyberArk * Pharma/IT background is a solid nice to have * Strong desktop support skills Interview Schedule: 2 rounds virtual, 30 mins – 1 hr. 2 stages of interview contingent on passing the 1st round About Us: Founded in 2009, IntelliPro is a global leader in talent acquisition and HR solutions. Our commitment to delivering unparalleled service to clients, fostering employee growth, and building enduring partnerships sets us apart. We continue leading global talent solutions with a dynamic presence in over 160 countries, including the USA, China, Canada, Singapore, Japan, Philippines, UK, India, Netherlands, and the EU. IntelliPro, a global leader connecting individuals with rewarding employment opportunities, is dedicated to understanding your career aspirations. As an Equal Opportunity Employer, IntelliPro values diversity and does not discriminate based on race, color, religion, sex, sexual orientation, gender identity, national origin, age, genetic information, disability, or any other legally protected group status. Moreover, our Inclusivity Commitment emphasizes embracing candidates of all abilities and ensures that our hiring and interview processes accommodate the needs of all applicants. Learn more about our commitment to diversity and inclusivity at . Compensation: The pay offered to a successful candidate will be determined by various factors, including education, work experience, location, job responsibilities, certifications, and more. Additionally, IntelliPro provides a comprehensive benefits package, all subject to eligibility. -- Powered by JazzHR nlx2UTGeuZ

Job DescriptionCloud Systems Architect Employment Type: Full-Time, Mid-levelDepartment: Information Technology We are seeking a Cloud Systems Architect with experience with cloud infrastructure to engineer and support public, private and hybrid clouds. The ideal candidate will be proficient in a variety of cloud hosts including Amazon Web Services and Microsoft Azure at a minimum. CGS brings motivated, highly skilled, and creative people together to solve the government’s most dynamic problems with cutting-edge technology. To carry out our mission, we are seeking candidates who are excited to contribute to government innovation, appreciate collaboration, and can anticipate the needs of others. Here at CGS, we offer an environment in which our employees feel supported, and we encourage professional growth through various learning opportunities. Skills and attributes for success:- The candidate will be knowledgeable of the most recent updates and developments and act as an advisor to our customer in reference to the cloud management strategies to be employed to take advantage of the benefits offered by cloud computing such as being able to function without any restrictions to the workload, initiate as many workstations as necessary per time period and pay only for what they actually use. - The candidate will also work with the IT Security team to manage and maintain cloud systems security of the data and network resources. - The candidate will also be responsible for engineering on customer premise applications and systems interconnected to cloud resources. - Designs and defines system architecture for new or existing complex computer systems. - Determines systems specifications, input/output processes, and working parameters for hardware/software compatibility and maintenance of system security. - Coordinates design of subsystems and integration of total system. Identifies, analyzes, and resolves program support deficiencies. - Develops and recommends corrective actions. - May provide technical guidance for database administrators and software developers. Qualifications:- Experience with and a complete understanding of the technology required for cloud computing.- Experience with the skills to migrate applications to the cloud.- Be able to build relationships between the customers and the team members.- The ability and the knowledge to integrate services and tools to any and all areas to be used such as networks and data processing.- The ability and the knowledge to implement security information and event management to keep the customer's assets safe.- Experience with meeting or exceeding the requirements of cloud provider service-level agreements Experience with AWS and Azure.- Knowledge of a multitude of programming languages including Python, PHP, Java, Node and Ruby on Rails.- Typically a Bachelor's Degree and 6 years work experience or equivalent experience. Our Commitment:Contact Government Services (CGS) strives to simplify and enhance government bureaucracy through the optimization of human, technical, and financial resources. We combine cutting-edge technology with world-class personnel to deliver customized solutions that fit our client’s specific needs. We are committed to solving the most challenging and dynamic problems. For the past seven years, we’ve been growing our government-contracting portfolio, and along the way, we’ve created valuable partnerships by demonstrating a commitment to honesty, professionalism, and quality work.Here at CGS we value honesty through hard work and self-awareness, professionalism in all we do, and to deliver the best quality to our consumers mending those relations for years to come. We care about our employees. Therefore, we offer a comprehensive benefits package.- Health, Dental, and Vision- Life Insurance- 401k- Flexible Spending Account (Health, Dependent Care, and Commuter)- Paid Time Off and Observance of State/Federal Holidays Contact Government Services, LLC is an Equal Opportunity Employer. Applicants will be considered without regard to their race, color, religion, sex, sexual orientation, gender identity, national origin, disability, or status as a protected veteran. Join our team and become part of government innovation! Explore additional job opportunities with CGS on our Job Board: For more information about CGS please visit: or contact:Email: #CJ We may use artificial intelligence (AI) tools to support parts of the hiring process, such as reviewing applications, analyzing resumes, or assessing responses. These tools assist our recruitment team but do not replace human judgment. Final hiring decisions are ultimately made by humans. If you would like more information about how your data is processed, please contact us.

Job Description At E Tech Group, joining our team means joining a group of passionate and forward-thinking experts. We're one of the largest engineering and system integration firms in the United States providing value for our clients through IT automation and control solutions for more than 30 years to the Life Sciences, Mission Critical, Metals & Mining, Warehousing & Distribution, and CPG/Food & Beverage industries. Our national scale allows us to help our clients develop and implement standardized solutions at any of their facilities regardless of physical location or the local resources available at that site. The Senior Controls / Automation Engineer role requires an individual have a diverse engineering skill set with the ability to work independently to perform all aspects of process automation engineering and system integration, including initial concepts, specifications, design engineering, documentation, project implementation, testing, startup, and training of operating and maintenance personnel. You will be a key member of a diverse team of professionals developing solutions for our client's most complex automation challenges. Location: Hybrid with local driving travel You will: • Lead or work on a project team responsible for the design, configuration, and testing of continuous and batch control applications., • Understand the project scope and financials and exercise good time management skills to plan & coordinate the work as part of a project team by developing project schedules and budgets in collaboration with project leadership and identify change orders and justify changes to Project Management ensuring completion of all project deliverables to the satisfaction of the client., • Anticipate and provide solutions to project leadership and/or customer giving high priority to customer satisfaction offering strong technical expertise and advisement as part of the project team., • Adapt to a flexible work schedule & travel, if necessary, to participate in the design, development, and start-up of control systems at the client's facility., • Act as an automation Subject Matter Expert, • Hands on experience executing automation projects for process plants, minimum of 3-5 years in industry, preferably in Life Sciences domain., • BS Engineering degree or equivalent educational background, • Detail oriented with strong technical aptitude and desire for learning new technologies, • Knowledge of industry and regulatory standards, design criteria and codes relevant to Instrumentation and Controls, • ISA S88 Batch standard, • ISA S95 Controls System Architecture standard, • GAMP 5 & cGMP, • 21 CFR Part 11, • Demonstrated ability to develop process control system applications, utilizing Programmable Logic Controllers (PLC), Human Machine Interfaces (HMI), and Supervisory Control and Data Acquisition (SCADA) Systems, configuration of thin client server applications, design, developing & maintaining databases for data collection, configuring process historians and using reporting tools to present process data to operations & management, tuning control loops, providing control system startup services, troubleshooting existing control systems and providing control system qualifications., • Solid understanding of object-oriented software development & delivery methodologies, • Expertise with the design, implementation, maintenance and troubleshooting of virtual server-based control system architectures, and understanding of control system network topology, i.e. Ethernet, Ethernet/IP, ControlNet, DeviceNet, etc., • Knowledge of process instrumentation specification, installation & troubleshooting, and control panel design, check-out, commissioning & troubleshooting, • Hands-on experience rapidly troubleshooting and solving equipment & instrument-related issues during start-up and commissioning and perform complex system testing, • Experience working at customer sites supporting the installation & commissioning of equipment and systems., • PLC Programming with Rockwell Studio5000, RSLogix5000, • Ability to program in RLL, SFC and ST, • HMI Programming using one or more of Rockwell FTView ME and SE, Wonderware System Platform, Inductive Automation Ignition, • Configuration & use of one or more of Wonderware DAS/OI Server, FactoryTalk Gateway, RSLinx, RSNetWorx, KepServerEx, • Configuration & development of one or both of Wonderware InBatch & Rockwell FTBatch, • Configuration & development using one or more of Wonderware Historian, FTHistorian, OSI PI, • Use of SQL for database creation, query & management.Ability to develop stored procedures, functions & views and use of SQL commands for integration of control systems to back-end databases. Familiarity with SSRS for reporting, • Configure & operate Allen Bradley PowerFlex Drives via manual HIM or through PLC programming, • Configuration, use & troubleshooting of Allen Bradley Stratix switches, • Bio Reactors, • Skid System Controls, • Clean/Steam in Place, • Freeze Dryers, • Autoclave Control Systems, • Centrifuge Systems, • Building Management & HVAC Control Systems, • Thermal Oxidizer Systems, • Purified Water, • Finished Product Transfer Systems, • Granulator Control Systems, • Boilers and Boiler Control Systems, • Bulk Material Handling and Processing, • Laboratory Systems, • Pasteurization and Homogenization, • Wastewater Treatment, • Weighing and Metering Systems, • Wet or Dry Blending System, • 401k + match + prompt enrollment. E Tech Group employees are 100% vested upon entry., • Prompt enrollment into Medical, Dental, and Vision benefits., • Generous paid time off that includes paid vacation, paid holidays, paid family leave and sick time off.

Job DescriptionCloud Engineer (AWS)Employment Type: Full-Time, Experienced Department: Information technology We are seeking a Cloud Engineer (AWS) who will be responsible for supporting the development of all required documentation necessary to support the engineering, security, and operational processes for a large federal agency. The ideal candidate will possess a strong grasp of cloud computing SaaS, PaaS, and IaaS fundamentals. CGS brings motivated, highly skilled, and creative people together to solve the government’s most dynamic problems with cutting-edge technology. To carry out our mission, we are seeking candidates who are excited to contribute to government innovation, appreciate collaboration, and can anticipate the needs of others. Here at CGS, we offer an environment in which our employees feel supported, and we encourage professional growth through various learning opportunities. Skills and attributes for success:- Design solutions that ensure maximum flexibility and scalability, while meeting all required security controls.- Support the development of all required documentation necessary to support the engineering, security, and operational processes. - Perform business and technical alternative analysis for any/all aspects of the solution, aiding the customer is making decisions along the way. - Facilitate the transition of the solution to operations, initially and ongoing ensuring at all times the system is operating within the anticipated operating boundaries. - Strong grasp of cloud computing SaaS, PaaS and IaaS fundamentals with experience designing and implementing solutions. Qualifications:- Bachelor's Degree in Computer Science, Engineering, or other Engineering or Technical discipline or equivalent relevant experience - At least four (4-7) years of professional IT experience performing duties in support of federal government agencies. - 4+ years design, implementation and/or support of highly distributed applications demonstrating strong architectural skills to ensure availability, reliability, etc. - Hands-on experience with AWS (Required) or other cloud services reinforced with architectural design experience - Experience designing and delivering large-scale solutions, most of which that have advanced to the production state. - Strong grasp of cloud computing SaaS, PaaS and IaaS fundamentals with experience designing and implementing solutions. Develop cloud base solution designs and implementation plans based on customer needs - Familiar with lift-and-shift migrations and migration methodologies for cloud migration- Experience in Cloud computing, Networking, Storage, and Identity Management AWS Certification or Cloud Architect Certification (or desire to obtain certification) Ideally, you will also have:- Hands-on experience with AWS (required) or other cloud services reinforced with architectural design experience designing and delivering large-scale solutions, most of which that have advanced to the production state. - Develop cloud base solution designs and implementation plans based on customer needs - Familiar with lift-and-shift migrations and migration methodologies for cloud migration - Experience in Cloud Compute, Networking, Storage, and Identity Management AWS Certification or Cloud Architect Certification (or desire to obtain certification) Our Commitment:Contact Government Services (CGS) strives to simplify and enhance government bureaucracy through the optimization of human, technical, and financial resources. We combine cutting-edge technology with world-class personnel to deliver customized solutions that fit our client’s specific needs. We are committed to solving the most challenging and dynamic problems.For the past seven years, we’ve been growing our government-contracting portfolio, and along the way, we’ve created valuable partnerships by demonstrating a commitment to honesty, professionalism, and quality work. Here at CGS we value honesty through hard work and self-awareness, professionalism in all we do, and to deliver the best quality to our consumers mending those relations for years to come. We care about our employees. Therefore, we offer a comprehensive benefits package.- Health, Dental, and Vision- Life Insurance- 401k- Flexible Spending Account (Health, Dependent Care, and Commuter)- Paid Time Off and Observance of State/Federal Holidays Contact Government Services, LLC is an Equal Opportunity Employer. Applicants will be considered without regard to their race, color, religion, sex, sexual orientation, gender identity, national origin, disability, or status as a protected veteran. Join our team and become part of government innovation!Explore additional job opportunities with CGS on our Job Board: more information about CGS please visit: or contact:Email: #CJ We may use artificial intelligence (AI) tools to support parts of the hiring process, such as reviewing applications, analyzing resumes, or assessing responses. These tools assist our recruitment team but do not replace human judgment. Final hiring decisions are ultimately made by humans. If you would like more information about how your data is processed, please contact us.

Overview: GovCIO is currently hiring for an IT Architect to to architect IT systems. This position will be located in Rome, NY and will be an onsite position. Responsibilities: Architects IT systems, including on-premises, cloud, hybrid-cloud, edge architecture, and deployable edge devices. Performs engineering research, analysis, and simulation related to cloud computing. Applies CI/CD pipeline expertise. Designs scalable, secure architectures linking edge acquisition, garrison compute, and cloud analytics. Defines patterns for portability, interoperability, and accreditation. Aligns work with the intended future state using secure OTA transfer, NGFW, SD-WAN, and NSA Type-1 encrypted transport across IL5/SIPR/JWICS and hybrid-cloud paths. Designs and demonstrates architectures for software/hardware prototypes that process, move, and store data globally with high availability, redundancy, and security, including cloud migration strategy and CI/CD across cloud and on-prem. Designs IT systems and software to conform to NIST SP 800-53/800-37 and CNSSI 1253 for NIPR/SIPR/JWICS connectivity; aligns with DISA/DoD guidance and AFCERT advisories. • Skills: system requirements decomposition, interface definition, trade studies, and model-based analyses; proficiency with CI/CD and IaC; ability to lead technical risk burn-down, troubleshooting across compute/storage/network, writing clear design artifacts, and coordinating test plans with mission partners. Required Skills and Experience • Clearance Required:TS/SCI, • Masters Degree, • Foundational Cloud Training (AWS, Azure, etc.), DevOps Courses, Model-Based Systems Engineering (MBSE), Zero-Trust Architecture, RMF Accreditation, Enterprise Architecture Frameworks, Advanced Cross-Domain Integration, Advanced DODAF Training #nssprop #nss #afrl Preferred Skills and Experience: CompTIA Cloud+, AWS Certified Cloud Practitioner or similar, Certified DevOps Engineer, TOGAF Certified Architect, CISSP Company Overview: GovCIO is a team of transformers--people who are passionate about transforming government IT. Every day, we make a positive impact by delivering innovative IT services and solutions that improve how government agencies operate and serve our citizens. But we can't do it alone. We need great people to help us do great things - for our customers, our culture, and our ability to attract other great people. We are changing the face of government IT and building a workforce that fuels this mission. Are you ready to be a transformer? What You Can Expect Interview & Hiring Process If you are selected to move forward through the process, here’s what you can expect: • During the Interview Process, • Virtual video interview conducted via video with the hiring manager and/or team, • Camera must be on, • A valid photo ID must be presented during each interview, • During the Hiring Process, • Enhanced Biometrics ID verification screening, • Background check, to include:, • Criminal history (past 7 years), • Verification of your highest level of education At GovCIO, we consistently hear that meaningful work and a collaborative team environment are two of the top reasons our employees enjoy working here. In addition, our employees have access to a range of perks and benefits to support their personal and professional well-being, beyond the standard company offered health benefits, including: • Employee Assistance Program (EAP), • Corporate Discounts, • Learning & Development platform, to include certification preparation content, • Training, Education and Certification Assistance*, • Referral Bonus Program, • Internal Mobility Program, • Pet Insurance, • Flexible Work Environment, • Available to full-time employees Our employees’ unique talents and contributions are the driving force behind our success in supporting our customers, which ultimately fuels the success of our company. Join us and be a part of a culture that invests in its people and prioritizes continuous enhancement of the employee experience. We are an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, gender, gender identity or expression, sexual orientation, national origin, disability, or status as a protected veteran. EOE, including disability/vets. Posted Pay Range The posted pay range, if referenced, reflects the range expected for this position at the commencement of employment, however, base pay offered may vary depending on multiple individualized factors, including market location, job-related knowledge, skills, education, experience, and internal equity. The total compensation package for this position may also include other compensation elements, to be discussed during the hiring process. If hired, employee will be in an “at-will position” and the GovCIO reserves the right to modify base salary (as well as any other discretionary payment or compensation program) at any time, including for reasons related to individual performance, GovCIO or individual department/team performance, and market factors. Posted Salary Range: USD $185,000.00 - USD $210,000.00 /Yr.

Job DescriptionSalary: $45-$55K cb20 is the Capital Regions solution provider of choice for organizations that value IT and Managed Services expertise and category-leading customer service.We are an organization that puts Customers first, acts with Integrity, embraces innovation and values Self-Development and Contribution to our community. We partner with the worlds leading hardware and software companies to deliver end-to-end consulting, implementation and managed services across the U.S. With world-class engineering talent and 30+ years of experience cb20 delivers confidence, security, a true sense of control and the highest- quality, end-to-end customer experience in the business. As a Support Center Engineer I, you will provide Tier 1 support for customers. This role is responsible for providing customers with technical support, remotely and/or on-site so that they can complete core and essential duties of their roles with functional IT equipment. The candidate should be able to explain features of technical products, answer questions about installation, configuration, upgrades, customization, and usage of technical equipment. Duties and Responsibilities * Perform customer support to clients via telephone, chat, email, or tickets. • Windows 11 imaging., • Migration from Windows 11 to 10., • Remove old assets and replace them with new assets. Document all pertinent end user information in ticketing system. • Triaging, troubleshooting, and resolving error messages, failures, and customer issues. Provide support for users utilizing laptops, workstations, desktops, iOS, and Android devices. * Provide connectivity support for users devices. * Configure and install software for end user devices such as laptops, workstations, and tablets. * Support and maintain customer systems and networks. * Provide exceptional customer service. Qualifications Requirements/Job Specifications Education: Associates degree in Computer Science OR equivalent combination of education and work experience. Desired: CompTIA A+ Certification. Experience: 0-3 years of IT experience. Experience working in a collaborative, collaborative environment. Standards: Ability to follow standards as outlined in the cb20 Company Manual. Skills: Knowledge of the following: O365/M365, Networking, Windows Servers, Virtualized Environments, PC Hardware, Backup Engines, VoIP, Cloud. Analytical and problem-solving abilities. Strong written, verbal communication, and documentation skills. Exceptional interpersonal skills, with a focus on rapport-building, listening, empathizing, and questioning skills. Ability to present technical terms in a user-friendly language. Ability to multitask and promote department success. Working time: 40 hours/week. All other times as defined by the demands of the customers and departments needs. Lifting: Typically, no lifting more than 25 lbs.

Job DescriptionDesktop/Workstation Design EngineerEmployment Type: Full-Time, ExperiencedDepartment: Information Technology CGS is seeking an experienced Desktop/Workstation Design Engineer to participate in architecture discussions, system reviews, design planning, and technology roadmap planning for current and future desktop integration efforts. CGS brings motivated, highly skilled, and creative people together to solve the government’s most dynamic problems with cutting-edge technology. To carry out our mission, we are seeking candidates who are excited to contribute to government innovation, appreciate collaboration, and can anticipate the needs of others. Here at CGS, we offer an environment in which our employees feel supported, and we encourage professional growth through various learning opportunities. Skills and attributes for success:- Acts as the Subject Matter Expert for the development and implementation of the Desktop Operating System (OS) Images. - The candidate engineers’ robust solutions for large-scale deployment of software using OS deployment technologies such as Microsoft Endpoint Configuration Manager (MECM) and the Microsoft Deployment Toolkit (MDT). - Develops tests and implements software distribution packages, to include updates to software applications to be applied to desktops, laptops, tablets, and servers used within the enterprise. - Provides information and recommendations to meet various user-based software requirements. - Strong familiarity with scripting languages such as Powershell and VB script. - Implements server OS deployment methodologies to include automated server build processes. - Provides support for an OS patching infrastructure such as HCL BigFix or Windows Update/MECM that applies mandatory security updates to enterprise systems. - Analyzes, evaluates, and recommends desktop, laptop, tablet, and server hardware. - Performs security related tasks which include, documentation, vulnerability scan review, assessment support, patch management, and auditing as required. Qualifications:- The ideal candidate for this position will possess experience with integrating and upgrading desktops and laptops from the Windows 7 operating system to Windows 10 operating system, upgrading Microsoft and 3rd party applications, and have experience with litigating software such as Ipro and Concordance. - The ability to work independently with only minor guidance is a must. Our team is engineering a Windows 10 image on an Intel based system which will be integrated with Microsoft Exchange 2013, Microsoft Office 2013, and various 3rd party applications. · Windows OS engineering experience· Understanding of the application of security controls on the image· Microsoft Office engineering experience· Integrating anti-virus applications in an image· VPN/Remote access (Cisco Secure Access with RSA a plus)· Windows Scripting experience· Good writing skills Ideally, you will also have:- VB and/or VBA coding experience a plus· VDI/Citrix experience· SMS/SCCM experience a plus· Understanding of PKI· VMWare experience· Litigating software such as Ipro and Concordance Our Commitment:Contact Government Services (CGS) strives to simplify and enhance government bureaucracy through the optimization of human, technical, and financial resources. We combine cutting-edge technology with world-class personnel to deliver customized solutions that fit our client’s specific needs. We are committed to solving the most challenging and dynamic problems. For the past seven years, we’ve been growing our government-contracting portfolio, and along the way, we’ve created valuable partnerships by demonstrating a commitment to honesty, professionalism, and quality work. Here at CGS we value honesty through hard work and self-awareness, professionalism in all we do, and to deliver the best quality to our consumers mending those relations for years to come. We care about our employees. Therefore, we offer a comprehensive benefits package.- Health, Dental, and Vision- Life Insurance- 401k- Flexible Spending Account (Health, Dependent Care, and Commuter)- Paid Time Off and Observance of State/Federal Holidays Contact Government Services, LLC is an Equal Opportunity Employer. Applicants will be considered without regard to their race, color, religion, sex, sexual orientation, gender identity, national origin, disability, or status as a protected veteran. Join our team and become part of government innovation! Explore additional job opportunities with CGS on our Job Board: more information about CGS please visit: or contact:Email: #CJ We may use artificial intelligence (AI) tools to support parts of the hiring process, such as reviewing applications, analyzing resumes, or assessing responses. These tools assist our recruitment team but do not replace human judgment. Final hiring decisions are ultimately made by humans. If you would like more information about how your data is processed, please contact us.

Job Description We are looking for candidates located in Albany/Johnstown, NY or Baltimore, MD and surrounding areas. Candidates currently residing in these areas or planning to relocate will be considered for this position. Who we are: At Vireo Health, we’re not just another cannabis company—we’re a movement. Founded by physicians and driven by innovation, we blend science, technology, and passion to create top-tier cannabis products and experiences. Our team of 500+ bold creators and trailblazers are shaping the future of the industry, and we want you to be part of it. We take pride in being one of the most diverse and inclusive workplaces in cannabis, fostering a culture where everyone belongs. Through employee engagement, community events, and non-profit partnerships, we’re building more than a business—we’re building a community. As we rapidly expand nationwide, we’re looking for talented, driven, and passionate people to join us. If you’re ready to turn your passion into a career, let’s grow the future together. What the role is about: The IT Engineer will take ownership of customer issues reported and see problems through resolution. (S)he will research, diagnose, troubleshoot, and identify solutions to resolve customer issues. Follow standard procedures for properly escalating unresolved issues to the appropriate internal teams. Provide prompt and accurate feedback to customers. Ensure proper recording and closure of all issues. Documenting troubleshooting and problem resolution steps, creating knowledge base articles when appropriate for routine issues. Be familiar with regulatory & security standards, best practices, and company requirements. What impact you’ll make: * Maintains, monitors, and supports the IT infrastructure environment throughout the company; HQ, dispensaries, facilities, distribution centers, and new acquisitions. * Focus on Azure and Office 365 suite (Office Apps, SharePoint/OneDrive, Teams, User Administration, AD, DC, Servers). * Administrate and provides Level 1 and 2 support for incidents (problem/issues) or service requests related to Office 365 suite (Office Apps, SharePoint/OneDrive, Teams, User Administration, Azure, AD, DC, Servers). * Identify and resolve network issues across network/voice domains. Develop standard operating procedures and baseline network monitoring standards. Support network transport (LAN / WAN), service delivery (Voice / Data / Collaboration), and network provisioning in accordance with industry best practices and Vireo’s reference Architecture. * Identify and resolve system and OS-level issues within Vireo’s IT environment. Develop standard operating procedures and baseline system health/performance metrics. Support OS-level reliability and system provisioning in accordance with industry best practices and Vireo’s systems reference architecture. * Define and document best practices and strategies regarding application deployment and infrastructure maintenance. * Coordinates problem resolution among a variety of functional areas and provides subject matter expertise support for diagnosing and resolving problems * Be familiar with documentation for assigned technology, configuration standards, and infrastructure architecture. * Adhere to all Vireo and department processes and standards. * Participate in upgrade projects and installation activities for new hardware and software components. What you’re capable of: * Performs professional-level analysis, evaluation, or research applying basic concepts, practices, and theories of areas within IT information systems * Knows and applies IT information systems' fundamental concepts, practices, and procedures. Frequently uses and applies technical standards, principles, theories, concepts, and techniques. * Interact professionally and effectively through verbal and written communication with all professional contacts emphasizing the Company's interests. * Demonstrate Adaptability and Desire to Learn -- Works productively in the face of ambiguity or uncertainty. Demonstrates flexibility and resilience in response to obstacles, constraints, adversity, and mistakes. Constructively and resourcefully adapts to changing needs, conditions, priorities, or opportunities. Seeks out opportunities to learn from new discoveries, innovations, ways of looking at things, knowledge, and ideas. Invites and incorporates feedback without becoming defensive. * Perform Professional Analysis -- Integrates information from a variety of sources to arrive at a broader understanding of issues (e.g., company reports plus in-store observations). Defines issues clearly despite incomplete or ambiguous information. Identifies the critical issues in moderately complex problems. Approaches problems or issues systematically, looking for connections, trends, and potential causes. Probes and looks past symptoms to determine the underlying causes of problems and issues. * Plan and Execute -- Executes plans (e.g., action steps, timelines) to accomplish objectives. Prioritizes and balances time, actions, and projects to ensure the accomplishment of results. Holds him/herself and the team accountable for outcomes (e.g., achieving goals and complying with policies and procedures). Anticipates and addresses obstacles. * Produce Results -- Initiates decisive, timely action to address critical issues. Demonstrates a strong sense of ownership and a commitment to achieving meaningful results. Sets challenging, clear goals/targets and expectations for achieving business results. Drives initiatives/efforts to successful completion and closure. Takes personal responsibility to make decisions and take action. * Satisfy the Customer -- Identifies and anticipates customer requirements, expectations, and needs. Seeks feedback. from customers to identify improvement opportunities. Follows up with customers to ensure problems are solved. Continually searches for ways to improve customer service. * Use Professional Judgment -- Makes logical, rational, and integrative decisions and arrives at sound conclusions. Chooses the best alternative(s) based on a review of pros, cons, tradeoffs, timing, and probabilities. Evaluates the consequences and implications of alternatives, actions, or decisions. Makes timely decisions, balancing analysis with decisiveness. * May communicate with outsourced team(s) when working on issues or tasks. Frequent inter-organizational team contacts on routine matters. Physical Demands * Sit Rarely 1–2 hours * Stand Continuously 1–8 hours * Walk Continuously 2–8 hours * Balance Frequently 34–66% * Bend Occasionally 1–33% * Climb (2–6 ft) Occasionally 1–33% * Crawl Occasionally 1–33% * Crouch/Squat Occasionally 1–33% * Kneel Occasionally 1–33% * Reach (forward & overhead) Frequently 34–66% * Twist (45 degrees at waist) Occasionally 1–33% Lifting/Carrying * 0–10 lbs. Occasionally 1–33% * 11–25 lbs. Occasionally 1–33% * 26–50 lbs. Occasionally 1–33% * 51–100 lbs. Never 0% Traveling * 60-75% What you've accomplished: • Typically requires a BS or equivalent combination of education and related experience. EEO Statement Vireo Health, Inc. is an equal opportunity employer, and all qualified applicants will receive consideration for employment without regard to race, color, religion, age, sex, national origin, disability status, genetics, protected veteran status, sexual orientation, gender identity or expression, or any other characteristic protected by federal, state or local laws. Salary range: $65-$70k Benefits offered: medical, dental, vision, STD, LTD, HSA, FSA Dependent Care, Vol Life, 401k match Powered by JazzHR RCg2LbHvLa

Job Summary We are seeking a Senior Electrical RF Test Engineer to design, develop, and sustain automated functional test systems supporting advanced radio products sold to defense customers worldwide. The role focuses heavily on RF test system development and LabVIEW software engineering. This is a hands-on engineering position combining RF hardware knowledge with automated test software expertise. Location : Rochester, New York (Relocation assistance available) Key Responsibilities • Design and develop automated RF functional test systems, • Create LabVIEW applications for radio testing, • Sustain and improve existing test platforms, • Validate RF performance and measurement accuracy, • Integrate test equipment into automated systems, • Support defense customer test requirements Required Qualifications • Bachelor’s degree in Electrical Engineering or related field, • 6+ years relevant experience, • Strong NI LabVIEW and TestStand experience, • RF communication systems knowledge, • Basic networking (TCP/IP) understanding, • Experience with RF test equipment Preferred Skills • Object-Oriented Programming knowledge, • Experience with Git/SVN/JIRA, • RF and baseband measurement expertise, • Familiarity with spectrum/network analyzers, oscilloscopes, power meters

Client: State of New York Job Title: Systems Engineer Start Date: ASAP Position Type: Contract Duration: 30 Months Location: Albany, NY, 12210 (Hybrid) Number of Hours: 40 hours a week Interview Type: Webcam Position ID : HBITS-07-14539 Department: ITS Short Description: This position will assist in the supporting of Commercial Off The Shelf (COTS) software Responsibilities: • Provide local agency support for the Spectrum Justice System (SJS) RMS application., • Installing, upgrading, and/or patching of COTS software, both on a Server and Client machines., • Troubleshooting existing COTS software issues, • Troubleshooting Server issues, • Troubleshooting Network issues, • Troubleshooting File system issues, • Troubleshooting Database connectivity issues, • Assist with System Architecture and Design Required: • 84 months experience Installing, Upgrading, Patching, and Troubleshooting Server based Software Products, • 84 months experience in supporting Server Operating Systems, • 84 months experience in Web Server administration, • 84 months experience in Network troubleshooting, • 84 months experience in Database client installation and configuration, • 84 months experience in Security Principals, • 84 months experience in System Architecture and Design

The New York Independent System Operator (NYISO) manages the efficient flow of electricity on more than 11,000 circuit-miles of high-voltage transmission lines, dispatching power from hundreds of generating units across the state. The NYISO's Operations department invites applications for a full-time Senior Operations Engineer. The Senior Operations Engineer determine system reliability transfer limits, assist management in the review of NYISO controlled and secured facilities in the areas of System Studies, maintenance and testing of Power System Protection systems, and Reporting and Compliance, and develop engineering studies and analysis to assist management to make engineering-based recommendations to internal functions, Market Participant committees and the general public. Additionally, this individual will participate in NERC, NPCC, Regional, and NYISO study groups. ESSENTIAL DUTIES and RESPONSIBILITIES • Perform analytical engineering system studies in the following: NYISO seasonal operating studies, NERC, NPCC and Inter-Regional study support and, when requested, provide Transmission Planning support. Examples of studies include: seasonal reliability assessments, thermal, voltage, and transient stability studies, short circuit studies, Inter-Regional transfer analysis and reliability assessments., • Conduct detailed analysis of system events and disturbances. Review system events and performance after-the-fact for compliance analysis with NERC, NPCC, and NYSRC Standards, Criteria, and Rules., • Support Regional Market Coordination through the calculation and evaluation of distribution factors., • Maintain detailed electric power system models for the NYCA, incorporating the most accurate system representation for the neighboring Areas to represent the specific study conditions for thermal, voltage, stability short circuit analysis., • Conduct reviews of NYISO controlled and secured facilities, standards and practices for installation, maintenance and testing of bulk power protective relay systems., • Evaluate the effectiveness of computer simulation programs and/or other tools to ensure the safe and reliable operations of the NYISO transmission and generation resources., • Prepare and maintain NYISO technical support documentation., • Advise and confer with engineers in review meetings to review analysis and develop recommendations and conclusions. Provide technical support to Operations and Planning and Market Monitoring staff., • Participate in internal and external committees, project teams and Market Participant working groups., • Provide technical oversight to Associate Engineers., • Maintain a detailed electric power system model of the NYCA in the NERC Interchange Distribution Calculator (IDC). Administer access to IDC for NYISO staff and coordinate, where necessary, data mapping between the IDC and NYISO data sourcing applications. Qualifications include: • Bachelor's Degree (BS) in Electrical Engineering required with preference for coursework in power systems, electrical engineering, power system components (generation and transmission equipment, concepts and principles), mathematical modeling of power system components; Master's Degree (MS) preferred., • Seven years of related/industry experience; knowledge of power systems and demonstrated ability to use power system applications software and tools; or an equivalent combination of education, training and experience., • Proficiency in the use of advanced Power Flow and transient stability applications software (PSS/e or PSLF), or fault current assessment applications software (ASPEN One-Liner, etc.) to perform system studies is required; ADDITIONAL REQUIREMENTS • Ability to read, analyze and interpret general business periodicals, professional journals, technical procedures or government regulations. Ability to write reports, business correspondence and procedure manuals. Ability to prepare and deliver effective presentations to, and respond to questions from, internal and Market Participant working groups, Professional Societies, and the general public., • Ability to comprehend and apply principles of advanced calculus, modern algebra, and advanced statistical theory. Ability to work with concepts including vectors, phasors, Fourier transforms, non-linear partial differential equations, control theory and proofs of theorems., • Ability to apply principles of logical or scientific thinking to a wide range of intellectual and practical problems. Ability to deal with nonverbal symbolism (formulas, scientific equations, graphs, etc.) in its most difficult phases. Ability to deal with a variety of abstract and concrete variables., • Intermediate competency in Windows operating environment using MS Office (including spreadsheet and database) applications, e-mail and internet programs, and SAS (or similar) statistical analysis software familiarity with dynamic recording devices and support software, or frequency and spectral (FFT) analysis software is desirable. PHYSICAL DEMANDS While performing the duties of this job, the employee is regularly required to talk or hear. The employee frequently is required to stand, walk, sit and use hands to perform routine office tasks. The employee is occasionally required to reach with hands and arms. The employee must occasionally lift and/or move up to 15 pounds. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. WORK ENVIRONMENT The noise level in the work environment is usually moderate. Contact with staff and public will occur. Travel may be required to attend and/or conduct meetings, conferences and training. This position may require work on nights, weekends or holidays. Review of applications will begin immediately and continue until the position is filled. At the NYISO, we realize the importance of balancing the availability of remote work with the inherent value of bringing people together to attain success in the areas of maximum collaboration, relationship building and growth, teamwork, innovation and problem solving, as well as professional development and mentoring. In this role, you will be required to work onsite from our Rensselaer, NY location several days per workweek, with the option to work remotely on the remaining days. You will also be expected to respond to all business needs that may require any increase to the regular onsite requirements. The NYISO takes pride in recruiting, developing and retaining highly talented individuals. In addition to competitive salaries, we offer a comprehensive benefits package and innovative reward programs. All offers of employment will be made contingent upon the successful completion of a drug screening and background check. The NYISO is an Equal Opportunity Employer and as such, does not discriminate in its hiring or employment practices. Salary Range $102,600 - $171,200 USD Create a Job Alert Interested in building your career at New York ISO? Get future opportunities sent straight to your email. Create alert

The New York Independent System Operator (NYISO) manages the efficient flow of electricity on more than 11,000 circuit-miles of high-voltage transmission lines, dispatching power from hundreds of generating units across the state. The New York Independent System Operator (NYISO) works to make the power grid smarter by developing and deploying innovative information technology solutions to meet New York's dynamic energy needs. The NYISO's Operations department invites applications for a full-time Power Systems Application Engineer. The Power Systems Application Engineer will update and maintain the electric power system model used by the Energy Management System (EMS), Business Management System (BMS), Outage Scheduling System (OUS), Dispatcher Training Simulator (DTS) and the Transmission Congestion Contract (TCC) applications. Provide support in maintaining all SCADA/EMS advanced applications such as State Estimator (SE) and Security Analysis (SA). Provide support in defining and maintaining all the ICCP links and measurement data in Ranger SCADA system, which are required for all EMS and BMS applications. Maintain and support the new control center video wall, side wall visualization displays, and all hand drawn station one-line diagrams along with tabular displays. Also provide support in updating and maintaining the Power System Explorer/Data Engineering (PSE/DE) Tool software. Develop and apply a working knowledge of the New York State high voltage transmission system and the network model database software to support the NYISO market and security functions. Support the real-time power system analysis, primarily the estate estimator and contingency analysis functions. Support and maintain Phasor Measurement Units (PMU) data. and all hand drawn station one-line diagrams ESSENTIAL DUTIES and RESPONSIBILITIES • Maintain the transmission network and generation resource models that are used to support the day-Ahead and Real-Time energy markets as well as the basis for the TCC market., • Ensure integrity of such power system models by development and implementation of Business Owner Quality Assurance procedures., • Develop and implement ICCP data requirements to support the ISO State Estimation function in coordination with NY Transmission Owners and neighboring control areas., • Provide Power System Operations Dispatcher support and Operator training for all EMS applications such as, DLF, and SCADA., • Develop and maintain software and operating procedures to address special market and operating conditions., • Maintain and support modeling and software changes to support new resource types that are emerging to replace older generating units., • Maintain and support modeling and software changes to support aggregations which include the metering and dispatch signals to these devices., • Support in supplying additional power system models to NYISO teams for the purpose of testing and training on emerging resource technologies and the software changes that are needed, • Maintain and support sub zonal tie lines definition and associated PI measurement data for Billing and Settlement applications, • Maintain rating database., • Maintain and implement real-time security analysis functions., • Maintain and support Common Information Model (CIM) station one-line diagrams and all hand drawn station one-lines and tabular displays for Real-Time operation functions., • Maintain and validate PMPC test data to support Network Model update and provide data support & coordination with Member Relations., • Maintain and support the Wide Area View visualization applications., • Maintain and support Phasor Measurement Units (PMU) data, • Maintain and support the control center one-line diagram and the side wall visualization displays., • Maintain and support enhanced State Estimation., • Maintain and support the Power System Explorer/Data Engineering (PSE/DE) Tool software. Qualifications: • Bachelor's degree (BS) in Electrical Engineering and coursework in power systems, electrical engineering, power system components (generation and transmission equipment, concepts and principles) and mathematical modeling of power system components required; Master's degree (MS) in Electrical Engineering desired., • Three to five years of experience in power system engineering, unit commitment operation, operations or related discipline; working knowledge of state estimator programs desired; or equivalent combination of education, training and experience. ADDITIONAL REQUIREMENTS • Ability to read, analyze and interpret general business periodicals, professional journals, technical procedures or government regulations. Ability to write reports, business correspondence and procedure manuals. Ability to effectively present information and respond to questions from groups of managers, vendors, Market Participants and the general public., • Ability to work with mathematical concepts such as probability and statistical inference and fundamentals of plane and solid geometry and trigonometry. Ability to apply concepts such as fractions, percentages, ratios and proportions to practical situations., • Ability to apply principles of logical or scientific thinking to a wide range of intellectual and practical problems. Ability to deal with nonverbal symbolism (formulas, scientific equations, graphs, etc.) in its most difficult phases. Ability to deal with a variety of abstract and concrete variables., • Intermediate competency in Windows operating environment using MS Office applications, database spreadsheets, e-mail and internet programs. Working knowledge of UNIX desired. PHYSICAL DEMANDS While performing the duties of this job, the employee is regularly required to talk or hear. The employee frequently is required to stand, walk, sit and use hands to perform routine office tasks. The employee is occasionally required to reach with hands and arms. The employee must occasionally lift and/or move up to 15 pounds. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. WORK ENVIRONMENT The noise level in the work environment is usually moderate. Contact with staff and public will occur. Travel may be required to attend and/or conduct meetings, conferences and training. This position may require work on nights, weekends or holidays. At the NYISO, we realize the importance of balancing the availability of remote work with the inherent value of bringing people together to attain success in the areas of maximum collaboration, relationship building and growth, teamwork, innovation and problem solving, as well as professional development and mentoring. In this role, you will be required to work onsite from our Rensselaer, NY location several days per workweek, with the option to work remotely on the remaining days. You will also be expected to respond to all business needs that may require any increase to the regular onsite requirements. The NYISO takes pride in recruiting, developing and retaining highly talented individuals. In addition to competitive salaries, we offer a comprehensive benefits package and innovative reward programs. All offers of employment will be made contingent upon the successful completion of a drug screening and background check. The NYISO is an Equal Opportunity Employer and as such, does not discriminate in its hiring or employment practices. Salary Range $78,500 - $131,100 USD Create a Job Alert Interested in building your career at New York ISO? Get future opportunities sent straight to your email. Create alert

Job Description We are searching for a Mechanical Field Engineer to support our client in the Albany, NY area. This individual would be performing QC duties on construction projects in a heavy industrial environment in support of the U.S. Army Corps of Engineers. This is a cross-functional role that blends the responsibilities and capabilities of a Project Engineer and Mechanical Engineer. These responsibilities include the following: • Review mechanical submittals, shop drawings, RFIs, product data, and equipment selections for compliance with USACE specifications, UFCs, codes and contract requirements., • Provide technical responses and recommendations to support construction progress., • Assist in resolving design ambiguities and interpreting mechanical plans, specifications, and criteria., • Conduct on-site inspections of mechanical installations, including HVAC, plumbing, fire protection, fuel systems, and mechanical controls., • Verify compliance with approved submittals, technical specifications, and USACE quality standards., • Document deficiencies and track corrective actions through completion., • Participate in QC/QA meetings with contractor USACE Resident Office, and stakeholders., • Oversee commissioning activities for HVAC, plumbing, fire protection, and mechanical controls. Required Skills & Experience • Eligibility to work on U.S. government projects, • At least 5 years of mechanical engineering experience on large vertical construction projects., • Knowledge of HVAC, piping, plumbing, and building control systems. Nice to Have Skills & Experience • CQM or CQM-C Certification, • Experience with the USACE Three-Phase Control System (and the ability to explain it), • Experience working with USACE, NAVFAC, or the VA, • Bachelor's degree in mechanical engineering Job Type: 6-month contract to permanent hire opportunity Hourly Pay: $50-$60/hr Exact compensation may vary based on several factors, including skills, experience, and education. Benefit packages for this role will start on the 31st day of employment and include medical, dental, and vision insurance, as well as HSA, FSA, and DCFSA account options, and 401k retirement account access with employer matching. Employees in this role are also entitled to paid sick leave and/or other paid time off as provided by applicable law.

System Engineer Job Duties: Manages and monitors all installed systems and infrastructure for the organization to be in line with company guidelines or SOP (standard operating procedure).

Staff Software Engineer Remote Job Duties: • Implement and evolve a Data Lake storage system with low latency and high throughput for bulk data ingestion and query • Implement metadata, data governance, security, and acce

DUTIES AND/OR RESPONSIBILITIES: The System Administrator reports to the Managing Senior Systems Engineer and performs the following duties:.

The Planning Engineer position has the primary responsibility of performing a variety ofpower system planning and technical engineering studies evaluating the future reliability, economics, operations, and performance of the New York State power system. Familiarity or experience with long-term gener

The NYISO's Operations department invites applications for a full-time Power Systems Application Engineer. The Power Systems Application Engineer will update and maintain the electric power system model used by the Energy Management System (EMS), Business Management System (BMS), Outage Scheduling S

Troubleshooting File system issues. Assist with System Architecture and Design. System Architecture and Design.

System Engineer Job Duties: Manages and monitors all installed systems and infrastructure for the organization to be in line with company guidelines or SOP (standard operating procedure). Installs,

Provide local agency support for the Spectrum Justice System (SJS) RMS application. Troubleshooting File system issues. Assist with System Architecture and Design.

System Engineer Job Duties: Manages and monitors all installed systems and infrastructure for the organization to be in line with company guidelines or SOP (standard operating procedure). Installs,

Additional responsibilities may include supporting internal custom software applications, Python scripting for power systems engineering tools, and contributing to software testing efforts. Contribute Python scripting for power systems engineering tools (willingness to learn is sufficient). The New

System Engineer Job Duties: Manages and monitors all installed systems and infrastructure for the organization to be in line with company guidelines or SOP (standard operating procedure). Installs,

The NYISO's System & Resource Planning department invites applications for a full-time Planning Engineer, Transmission Integration. Conduct power system engineering studies (power flow, stability, short circuit, transfer limits, resource adequacy) in compliance with NERC, NPCC, NYSRC criteria. The N

System Engineer Job Duties: Manages and monitors all installed systems and infrastructure for the organization to be in line with company guidelines or SOP (standard operating procedure). Installs,

Bachelor's degree (BS) in Electrical Engineering or related technical field required; Course studies in power systems, electrical engineering, power system components (generation and transmission equipment, concepts and principles) and mathematical modeling of power system components required; Maste

System Engineer Job Duties: Manages and monitors all installed systems and infrastructure for the organization to be in line with company guidelines or SOP (standard operating procedure). Installs,

Bachelor's Degree (BS) in Electrical Engineering and coursework in power systems, electrical engineering, power system components (generation and transmission equipment, concepts and principles), mathematical modeling of power system components required; Master's Degree (MS) in Electrical Engineerin