System engineer jobs in Newark, New JerseyCreate job alerts

\nJob Description \n Assists physician during radiographic special procedures. Performs diagnostic and special procedure exams. \n Job Responsibility \n \n\n • As primary assistant gains knowledge of both performing the various procedures and has familiarity with the instruments/medications used in order to ensure patient safety.\n, • Adheres to proper sterile technique at all times prior to and during the procedure. Prepares set up trays and patient preparation prior to procedure.\n, • Has primary responsibility for calling time-out prior to start of all procedure or at any point in the procedure when it is required.\n, • Maintains a Flouro log for all procedures.\n, • Familiarity with catheter and guide wire exchange techniques as well as arterial and venous access.\n, • Strong knowledge of the usage of different catheter, guide wire, sheaths, contrasts, carbon dioxide and injector setup.\n, • Knowledge of various exams and different types of supply set up needed ex. biopsy, drainage, run-off, angioplasty, etc.\n, • Performs proper patient positioning during various stages of an examination.\n, • Knowledge of what parts of the procedure are to be imaged and can manipulate images after procedure to provide optimal imaging.\n, • Knowledge of and can assist in wound care and dressing related to interventional procedures.\n, • Interacts with patients on a professional and compassionate level before, during and after the procedure.\n, • Displays knowledge of all contrast agents, their indications and contraindications.\n, • Exhibits strong communication skills with fellow technologist, nurses and doctors throughout the institution.\n, • Selects proper technical factors relative to procedure, patients size and condition.\n, • Recognizes equipment failure troubleshoots basic problems. Notifies appropriate service engineer and management staff.\n, • Maintains and expedites patient turnover (request transport, call environmental and informs MD of the next patient in a timely fashion). Maintains work area in a clean and orderly fashion.\n, • Works with billing clerk to ensure proper billing for supplies.\n, • Maintains logbook for all procedures performed and can file and retrieve from all storage devices.\n, • Knowledge of all aspects of patient scheduling, can schedule a patient when necessary.\n, • Observes departmental radiation safety procedures to maintain occupational exposure as low as reasonably achievable (ALARA)\n, • Demonstrates the ability to obtain information and interpret information in terms of the patients needs as appropriate to the ages of the patients served.\n, • Demonstrates the ability to work in a dynamic atmosphere sometimes involving a stressful and strenuous situation.\n, • Demonstrates a thorough knowledge of vascular anatomy.\n, • Demonstrates the ability to anticipate the needs of the physician during the procedure.\n, • Practice universal precautions with all patients.\n, • Maintains Inventory levels and orders supplies when necessary.\n, • Follows infection control guidelines set by the institution.\n, • Proficient in entering, retrieving and accessing information using the departments RIS system, as well as PACS.\n, • Designates assignments and distributes work to transport staff as necessary.\n, • Transports patients when necessary to expedite examinations and or patient satisfaction.\n, • Interfaces with patient, staff and physicians both within and external to the department to facilitate the improvement of the patient experience in every possible way.\n, • Works continuously to improve Press Ganey scores via patient satisfaction.\n \n\n • Graduate from an accredited Radiologic Technology Program, required.\n, • New York State Department of Health licensure as a Radiologic Technologist, required.\n

Job Description THE ORGANIZATION The Center for Justice Innovation is a nonprofit organization dedicated to advancing community safety and racial justice. Since 1996, we’ve worked alongside communities, courts, and those most directly affected by the justice system to build stronger, healthier, and more equitable neighborhoods. With a team of over 900 staff and an annual budget of $130 million, the Center carries out its mission through three core strategies: • Operating Programs that pilot new ideas and address local challenges;, • Conducting original research to evaluate what works—and what doesn’t; and THE OPPORTUNITY Brooklyn Justice Initiatives (BJI), the largest operating project of the Center, seeks to re-engineer the experience of criminal court in Brooklyn, New York, by providing judges and attorneys meaningful alternatives to bail, fines, and jail sentences. Operating out of Kings County Criminal Court and community-based offices, BJI is a team of social service providers, court-based resource coordinators, mental health practitioners, compliance specialists, and others who seek to improve the quality of justice. Supervised Release offers an alternative to jail by providing pretrial supervision, case management, and voluntary social services to people charged with misdemeanor and felony offenses, and in doing so, uses an arrest as a window of opportunity to change the direction of a participant’s life, avoiding the harmful effects of incarceration. Program participants are monitored to ensure their appearance at court dates and mandatory programming, and receive referrals to services like job training, drug treatment, and mental health counseling. BJI seeks Case Managers for the borough’s Supervised Release Program (SRP). Reporting to Supervising Case Managers, Case Managers are the front line of service delivery and key to ensuring that the program meets its mandate. Specifically, Case Managers will supervise SRP participants according to their assigned tier and level; work with participants to identify and address barriers to compliance and court attendance; conduct outreach to participants, court stakeholders, community-based service providers, and collateral contacts; connect participants to appropriate services in the community to support their stabilization, and ensure accurate and timely court reporting on participants’ compliance with program requirements. Accurate and timely data entry is a core responsibility for this position. Additionally, Case Managers will co-facilitate pro-social and psycho-educational groups. Responsibilities include but are not limited to: • Provide supervision and court monitoring for SRP participants according to their assigned tier and level by completing check-ins in the specified method and frequency, while treating all participants with dignity and respect;, • Proactively communicate and reinforce program expectations with participants;, • Work with participants to identify and address barriers to compliance with supervision requirements and court attendance;, • Provide comprehensive, clinically-informed case management services by orchestrating internal and external resource allocation and service referrals, • Referrals should align with participants’ needs and goals, including but not limited to substance use, mental health, trauma, intimate partner violence, housing, education, and employment;, • Monitor participants’ compliance with supervision requirements;, • Conduct outreach to participants, their collateral contacts, and defense attorneys to maximize compliance with supervision requirements;, • Maintain accurate and timely data entry and case documentation aligned with the program model, court reporting obligations, and best practices;, • Submit accurate and timely reports to court within designated time frames, including compliance, noncompliance, re-arrest, and mandatory programming court notifications;, • Maintain professional and positive relationships with court staff, judges, and attorneys;, • Co-facilitate pro-social and psycho-educational groups for participants in collaboration with SRP Clinicians;, • Responsible for consistent and effective cross-team communication and collaboration to proactively identify successes, challenges, and opportunities to strengthen programming, create opportunities for meaningful collaboration, and maximize internal and external resources and expertise;, • Participate in individual, group supervision, and regular staff trainings to develop program expertise and related skill sets;, • Attend project events, community events, and meetings after house, as needed;, • Please note that this role is not eligible for clinical hours;, • Bachelor’s degree and two years direct practice experience (e.g., therapeutic or case management) required, or, high school degree or equivalent degree and six years direct practice experience required;, • Experience in pretrial, court-based, or criminal legal system strongly preferred;, • Must be detail-oriented with strong organizational and time management skills;, • Masters degree in Social Work, Mental Health Counseling, Forensic Psychology valued but not required;, • Experience working within a specialized branch of service provision like substance use treatment, mental health services, co-occurring disorders, or adolescent development preferred;, • Experience using trauma-informed and strength-based approaches strongly preferred;, • Must be able to work effectively independently and as part of a highly interdependent, multi-disciplinary team within a fast-paced and dynamic work environment;, • Professional demeanor and ability to work collaboratively and effectively with a variety of program stakeholders, including judges, prosecutors, defense attorneys, court staff, and site partner agencies;, • Openness to work collaboratively with people from diverse backgrounds in a culturally-competent manner; and Position Location: Brooklyn, NY Compensation: The compensation range for this position is $53,050 - $66,800 and is commensurate with experience. Benefits: The Center for Justice Innovation offers an excellent benefits package including comprehensive healthcare with a national network, free basic dental coverage, vision insurance, short-term and long-term disability, life insurance, and flexible spending accounts including commuter FSA. We prioritize mental health care for our staff and offer services like Talkspace and Ginger through our healthcare plans. We offer a 403(b) retirement plan with a two-to-one employer contribution up to 5%. Timeline to Apply: The Center is accepting applications on a rolling basis. We encourage interested applicants to apply as soon as possible. The Center for Justice Innovation is an equal opportunity employer committed to fostering an inclusive and diverse workplace. We do not discriminate based on race, color, religion, gender identity, gender expression, pregnancy, national origin, age, military service eligibility, veteran status, sexual orientation, marital status, disability, or any other category protected by law. We strongly encourage and welcome applications from women, people of color, members of the LGBTQ+ community, and individuals with prior contact with the criminal justice system. Our goal is to create a supportive and respectful environment where everyone, regardless of background or identity, feels valued and included. At this time, the Center is unable to sponsor or take over sponsorship of an employment visa. All applicants must be legally authorized to work in the United States at the time of application and throughout the duration of employment. Candidates are expected to provide accurate and truthful information throughout the hiring process. Any misrepresentation, falsification, or omission of material facts may result in disqualification from consideration, withdrawal of an offer, or termination of employment, regardless of when discovered. In compliance with federal law, all hires must verify their identity and eligibility to work in the United States and complete the required employment verification form upon hire. Please refer to the job posting for relevant contact information. If contact details are not provided, we kindly ask that you refrain from inquiries via phone or email, as only shortlisted candidates will be contacted. Powered by JazzHR JKwJiLtS6B

Job Description THE ORGANIZATION The Center for Justice Innovation is a nonprofit organization dedicated to advancing community safety and racial justice. Since 1996, we’ve worked alongside communities, courts, and those most directly affected by the justice system to build stronger, healthier, and more equitable neighborhoods. With a team of over 900 staff and an annual budget of $130 million, the Center carries out its mission through three core strategies: • Operating Programs that pilot new ideas and address local challenges;, • Conducting original research to evaluate what works—and what doesn’t; and THE OPPORTUNITY Brooklyn Justice Initiatives (BJI), the largest operating project of the Center, seeks to re-engineer the experience of criminal court in Brooklyn, New York, by providing judges and attorneys meaningful alternatives to bail, fines, and jail sentences. Operating out of Kings County Criminal Court and community-based offices, BJI is a team of social service providers, court-based resource coordinators, mental health practitioners, compliance specialists, and others who seek to improve the quality of justice. Supervised Release offers an alternative to jail by providing pretrial supervision, case management, and voluntary social services to people charged with misdemeanor and felony offenses, and in doing so, uses an arrest as a window of opportunity to change the direction of a participant’s life, avoiding the harmful effects of incarceration. Program participants are monitored to ensure their appearance at court dates and mandatory programming, and receive referrals to services like job training, drug treatment, and mental health counseling. BJI seeks a Case Manager for the borough’s Supervised Release Program (SRP) Brownsville/East New York office. Reporting to Supervising Case Manager, Case Manager is the front line of service delivery and key to ensuring that the program meets its mandate. Specifically, the Case Manager will supervise SRP participants according to their assigned tier and level; work with participants to identify and address barriers to compliance and court attendance; conduct outreach to participants, court stakeholders, community-based service providers, and collateral contacts; connect participants to appropriate services in the community to support their stabilization, and ensure accurate and timely court reporting on participants’ compliance with program requirements. Accurate and timely data entry is a core responsibility for this position. Additionally, the Case Manager will co-facilitate pro-social and psycho-educational groups. Please note that this role is not eligible for clinical hours. Responsibilities include but are not limited to: • Provide supervision and court monitoring for SRP participants according to their assigned tier and level by completing check-ins in the specified method and frequency, while treating all participants with dignity and respect;, • Proactively communicate and reinforce program expectations with participants;, • Work with participants to identify and address barriers to compliance with supervision requirements and court attendance;, • Provide comprehensive, clinically-informed case management services by orchestrating internal and external resource allocation and service referrals;, • Referrals should align with participants’ needs and goals, including but not limited to substance use, mental health, trauma, intimate partner violence, housing, education, and employment;, • Monitor participants’ compliance with supervision requirements;, • Conduct outreach to participants, their collateral contacts, and defense attorneys to maximize compliance with supervision requirements;, • Maintain accurate and timely data entry and case documentation aligned with the program model, court reporting obligations, and best practices;, • Submit accurate and timely reports to court within designated time frames, including compliance, noncompliance, re-arrest, and mandatory programming court notifications;, • Maintain professional and positive relationships with court staff, judges, and attorneys;, • Co-facilitate pro-social and psycho-educational groups for participants in collaboration with SRP Clinicians;, • Responsible for consistent and effective cross-team communication and collaboration to proactively identify successes, challenges, and opportunities to strengthen programming, create opportunities for meaningful collaboration, and maximize internal and external resources and expertise;, • Participate in individual, group supervision, and regular staff trainings to develop program expertise and related skill sets;, • Attend project events, community events, and meetings after house, as needed; and, • Bachelor’s degree and two years direct practice experience (e.g., therapeutic or case management) required, or high school degree or equivalent degree and six years direct practice experience required;, • Experience in pretrial, court-based, or criminal legal system strongly preferred;, • Must be detail-oriented with strong organizational and time management skills;, • Masters degree in Social Work, Mental Health Counseling, Forensic Psychology valued but not required;, • Experience working within a specialized branch of service provision like substance use treatment, mental health services, co-occurring disorders, or adolescent development preferred;, • Experience using trauma-informed and strength-based approaches strongly preferred;, • Must be able to work effectively independently and as part of a highly interdependent, multi-disciplinary team within a fast-paced and dynamic work environment;, • Professional demeanor and ability to work collaboratively and effectively with a variety of program stakeholders, including judges, prosecutors, defense attorneys, court staff, and site partner agencies;, • Openness to work collaboratively with people from diverse backgrounds in a culturally-competent manner; and Position Location: Brooklyn, NY (Brownsville/East New York). Compensation: The compensation range for this position is $53,050 - $68,800 and is commensurate with experience. Benefits: The Center for Justice Innovation offers an excellent benefits package including comprehensive healthcare with a national network, free basic dental coverage, vision insurance, short-term and long-term disability, life insurance, and flexible spending accounts including commuter FSA. We prioritize mental health care for our staff and offer services like Talkspace and Ginger through our healthcare plans. We offer a 403(b) retirement plan with a two-to-one employer contribution up to 5%. Timeline to Apply: The Center is accepting applications on a rolling basis. We encourage interested applicants to apply as soon as possible. The Center for Justice Innovation is an equal opportunity employer committed to fostering an inclusive and diverse workplace. We do not discriminate based on race, color, religion, gender identity, gender expression, pregnancy, national origin, age, military service eligibility, veteran status, sexual orientation, marital status, disability, or any other category protected by law. We strongly encourage and welcome applications from women, people of color, members of the LGBTQ+ community, and individuals with prior contact with the criminal justice system. Our goal is to create a supportive and respectful environment where everyone, regardless of background or identity, feels valued and included. At this time, the Center is unable to sponsor or take over sponsorship of an employment visa. All applicants must be legally authorized to work in the United States at the time of application and throughout the duration of employment. Candidates are expected to provide accurate and truthful information throughout the hiring process. Any misrepresentation, falsification, or omission of material facts may result in disqualification from consideration, withdrawal of an offer, or termination of employment, regardless of when discovered. In compliance with federal law, all hires must verify their identity and eligibility to work in the United States and complete the required employment verification form upon hire. Please refer to the job posting for relevant contact information. If contact details are not provided, we kindly ask that you refrain from inquiries via phone or email, as only shortlisted candidates will be contacted. Powered by JazzHR PfbICyT1ZP

Job Description A well-established mechanical contractor in Queens, NY is seeking a motivated HVAC Estimator. The company is looking to build a stronger team and expand. Candidate must possess a high degree of integrity, attitude, written/verbal communication skills, loyalty towards the company and its employees. Our shop is in Queens, NY, most projects are based in NYC/boroughs. The estimator is expected to attend walkthroughs, bid projects of all sizes, and must be able to send bids out with minor review. The successful candidate will have the following skills: The successful candidate will be self-sufficient and estimate plan and spec HVAC projects (must be able to complete your own piping/sheetmetal takeoffs), analyze quotes, compile accurate cost estimates, and prepare proposals/bid forms. Successful candidate must have a working knowledge of HVAC system function/design, sheet metal and piping estimating/sketching/fabricating knowledge and project management skills. Attend Job Walkthroughs/Jobsites/project coordination and owner/contractor/architect/engineer meetings as needed. Ability to work independently to organize and prioritize work. Review bid requests, plans and specifications, etc. to qualify projects for appropriate action, maintain bid lists. Interact with subcontractors and vendors to verify accuracy of proposals. Prepare estimates on multiple projects concurrently. Upon successful bids, you will be involved in managing the office side of the project (prepare submittals, shop drawings, budget/negotiate/purchase/coordinate equipment/materials for projects, create/review change orders, close out documents etc. as needed) until project completion as well as bidding other projects. Work with project team as required. Provide timely constructive feedback to direct supervisor regarding project status, risks, and concerns. Must have working knowledge of all typical computer programs used in this work environment such as Microsoft Windows, MS Office (MS Word, Excel, and Outlook), Dropbox, Google Drive, printing, scanning etc. Complete other duties as assigned. The annual gross base salary range is $70,000-100,000+. Actual salary will vary and are based on factors such as a candidate’s qualifications, skills, and competencies. Must have a valid NY Drivers' license with a clean driving record and will undergo a background check. Must send resume and references. Only candidates under consideration will be contacted.

Job Description BUILDING MECHANIC Full Time / NY, NY Work Assignment: East River Plaza We are seeking a Building Mechanic, to be directed by the Chief Engineer / Lead Mechanic and supervised by the Property Manager, to oversee and perform all facility maintenance tasks. General Statement of Duties and Responsibilities: The Building Mechanic oversees and performs all facility maintenance and upkeep. They shall follow a preventative maintenance program, inventory control, and the operation of all HVAC and MEP site equipment. They shall collaborate closely with management and other team members to deliver services and shall supervise technical service providers to ensure compliance with building performance specifications. The Building Mechanic shall report to the Chief Engineer and or Property Manager. Required Qualifications and Experience: We are seeking candidates with 5-7 years of related experience. Candidates must possess or be willing to obtain any building required NYC licenses within one (1) year of date. Timeframe to obtain licenses will be determined by management. They must have completed a trade apprenticeship or technical training, and a high school diploma is required. Responsibilities include, but are not limited to the following: • Perform building repairs and maintenance of all mechanical, electrical, and craft services to ensure operation within design capabilities and achievement of proper environmental conditions as prescribed by the Property Manager., • Oversee the efficient operation of facility equipment and systems., • Communicate with management regarding matters related to services performed., • Assist the Chief Engineer to oversee that tenant improvements are performed safely and efficiently., • Work with the Chief Engineer to administer an effective and accountable preventative maintenance system tailored to the facility., • Regularly evaluate all equipment and systems, providing Management with a list of deficiency items and recommendations for improvement., • Possess licenses and permits required by local laws and ordinances to operate, repair, and maintain the facility's equipment and systems., • Monitor and adjust the Building Management System (BMS)., • Operate fire life safety systems., • Be available on-call for emergencies related to the operations of the building., • Operate, maintain, and repair all HVAC equipment which includes, but is not limited to: compressors, motors, condensers, evaporators, steam traps, pumps, expansion valves, refrigerant lines and devices used to control temperature, and air conditioning systems in their entirety, including the use of approved recovery equipment and processes to comply with all laws and regulations., • Inspect building automation systems for HVAC, lighting, and energy tracking devices., • Inspect electrical motors and engines used to power pumps, compressors, and fans., • Inspect electrical/control systems, all motor controls and related equipment drivers such as variable frequency drives (VFD's)., • Maintain and upkeep equipment / mechanical rooms., • Perform daily rounds of facilities., • Enter and complete Work Orders., • HVAC: Inspect, diagnose, and troubleshoot HVAC systems. Complete routine preventive maintenance and repairs, including changing filters, belts, checking fluid levels, adjusting space temperatures, diagnosing and repairing VAV boxes, heat pumps, changing motors, calibrating and repairing pneumatic systems, etc., • Electrical: diagnose electrical issues, troubleshoot, changing lights, ballasts, performing minor repairs., • Plumbing: bathrooms repairs, soldering, snake drains, replace flushometers., • Perform any additional duties on as required, • Must be able to work independently with little supervision, • Safety awareness, • Ability to lift more than 50 lbs., • Ability to climb a ladder., • Ability to work with hand and power tools, • Good time management, • Ability to use Microsoft Office programs (Excel, Outlook, PowerPoint, and Word), • Ability to clearly communicate in writing and verbally, • Ability to present technical information, • Experience operating Building Management System (BMS), • Advanced understanding of HVAC Systems, • S-12 City Wide Sprinkler System, • S-13 City Wide Standpipe System, • EPA/CFC Universal Certification, • Q-01 NYC Refrigeration Machine Operators License, • F-19 Sprinkler Systems with Gravity and Pressure Tanks, • G-38 Torch Use of Flammable Gases for Cutting and Welding, • G-60 Certificate of Fitness for Torch Use of Flammable Gases, • S-14 Standpipe for Multi-zone System, • F-89 Fire, Life, Safety Director, • S-95 Supervision of Fire Alarm Systems Employee contributions and waiting periods may apply: • 401(k), • Medical, • Dental, • Life and Accidental Death Insurance, • Short and Long Term Disability Insurance, • Flexible Spending Account

Job Description Loews Regency New York Hotel has a legacy of luxury - expertly orchestrated and masterfully performed. Located in midtown Manhattan, the property seamlessly blends its iconic Art Deco design with modern sensibilities, craftily merging form and function to compliment 50 years of service expertise. Welcome to our Park Avenue Allure. Purpose: The Engineering Apprentice program provides real world work experience related to HVAC, electrical, indoor air quality, and controls. The apprentice will assist in the general maintenance and painting in the building and completion of all maintenance requests. Essential Functions and Responsibilities: • Performs general repairs and maintenance work., • Provides assistance to senior engineers., • Responds to Meeting Room, Guest Room, Food & Beverage Outlet, Public Space, and Back of the house maintenance requests., • Reviews and completes daily complaint log., • Performs work as dispatched by HotSOS or other system., • Expedites light bulb replacement program., • Maintains and stocks supplies and tools in storerooms on floors., • Assists guests with any requests., • Communicates status of maintenance requests to supervisor/manager., • Cleans engineering shop., • Follows up all maintenance requests as directed by Chief Engineer or supervisor, • Communicates daily with Chief Engineer or supervisor on status of maintenance/repair assignments., • Ensures that the hotel's building systems are operating safely, economically and efficiently., • Follows proper hotel standards while engaging in repairs in occupied guest rooms or guest areas., • Assists the Chief Engineer in ensuring that all hotel systems meet the standards established by local, state and federal regulating agencies., • Informs Chief Engineer of any repair problems that may arise during their shift., • Has basic knowledge of hotel's plumbing, heating/boiler, electrical, refrigeration, air conditioning, fire safety, sprinkler, lighting and communication systems., • Assists Chief Engineer in floor/room inspections., • Helps monitor energy consumption and waste., • Maintains equipment and supplies., • Use tools safely and correctly., • Check clipboard and daily assignment sheet for job assignments., • Completely familiar with Hotel Emergency procedures and able to respond quickly and accurately during an actual emergency, to notify all appropriate personnel., • Notifies immediate supervisors promptly and fully of all problems or unusual matters of significance., • Is polite, friendly, and helpful to the guests, management, and fellow employees., • Attends all appropriate hotel meetings and training sessions., • Maintains cleanliness and excellent condition of equipment, and work area., • Executes emergency procedures in accordance with hotel standards., • Complies with safety regulations and procedures., • Complies with hotel policies and rules., • Recycles whenever possible., • Remains current with hotel information and changes., • Complies with hotel uniform and grooming standards., • A minimum of 5 classes not limited too but may include HVAC, Electrical, Indoor Air Quality, Controls. Must be a member of Local 399, • Must be knowledgeable in Grout, • Courses in engineering/maintenance preferred., • Must have English skills (read, write and speak)., • Familiarity with basic tools and equipment, electrical, a/c pumps required., • This position requires bending, lifting and stooping. Must be able to lift up to 75 pounds. Must be flexible to work any shift, including weekends and holidays.

Job Description Hotel Maintenance Technician (Line Engineer) Pay Rate : $20-$22/hr SUMMARY: Keep all equipment in good repair with a minimum of downtime by providing day-to-day maintenance of the hotel under the direction of Engineering Management. Continually work towards and support the improvement of engineering service to both guests and associates. RESPONSIBILITIES: • Report to work on time and in full uniform., • Train and instruct other members of the staff through sharing of knowledge and skills., • Operate as an independent mechanic by analyzing problems, identifying courses of action, and implementing solutions with available resources and to a high degree of quality., • Keep accurate completion and task records in the project files. Set an example of continuous self-development., • Plunging toilets, unclogging drains, repairing all types of hardware, plumbing, and electrical equipment including lamps, air conditioners and cosmetic items., • Clean, lubricate, protect, and otherwise maintain all tools and equipment in the hotel. See that all tools used are returned to the shop and secured in proper storage area., • To protect and otherwise maintain your assigned tool pouch and its tools at the discretion of the Engineering Management., • Monitor systems as necessary, to be fully informed of the system operation and to handle emergencies involving the systems., • Have a working knowledge of fire sprinkler and emergency power systems. Observe and analyze energy and utilities usage in the hotel and on the grounds., • Look for ways to conserve energy and report any ideas to the Engineering Management., • Be available for any emergencies and act in an engineering capacity to protect our guests and associates, and preserve the building and its systems during the emergency., • To act as quickly and responsibly as possible to return the building to its normal operating status. To inform Engineering Management of any such emergencies., • Be aware of all existing departmental Job Safety Analysis and to strive to work in an accident-free manner and to create a safe work environment for others., • Continuously look for conditions which may endanger associates or guests of the hotel and to take immediate action to correct any hazardous conditions found., • Read, log, track, and interpret readings from meters, gauges, and other measuring units., • Maintain a thorough log of each day’s activities and problems that occur and to ensure this information is passed on to other shifts., • Clean all engineering areas as directed by Engineering Management., • Work in a neat and efficient manner, keeping work areas clean and well organized., • Serve as otherwise directed or needed to help maintain the effective and efficient operation of the hotel at the discretion of Engineering Management or the hotel General Manager., • Complete all work assigned in a safe and professional manner. Maintain communications with supervisors to ensure that all needed materials, tools, and supplies are available or on order., • Follow up on any items that may be on back order. Keep supervisor updated on assignments., • Provide training and technical advice to other engineers as needed or requested., • Maintains a working knowledge of all federal, state, and local laws, codes, and regulations., • Maintains a professional image at all times., • Maintains the hotel facility and related equipment in a safe and efficient manner., • Provides for a safe work environment by following all safety and security procedures and rules., • Reads, learns, understands, and refers to the Standard Operating Procedures., • Each associate will be required to follow the rules as found in the M&R Employee Handbook. Performs other duties as assigned by management, of which employee is capable of performing

Job Description Job Title: Roadway Worker In Charge (RWIC) Location: New York, NY Job Type: Full-Time and Part-Time FLSA Status: Hourly; Non-Exempt Reports To: District Manager Travel: Yes, travel is expected for this position (50% - 85% on average). Supervisory Responsibility: No Compensation: Negotiable, based on skills and experience. Company Profile: National Railroad Safety Services, Inc. (NRSS) is a certified DBE/WBE firm primarily focused on providing safety services to the railroad industry. NRSS is the most trusted name in the railroad industry for providing qualified field safety staff and safety training. To best serve the railroad industry, NRSS provides all of these services in the continental United States, Canada, and Mexico. NRSS has the proven ability and the proven safety record to handle any project. Find the safety you have been missing today! Job Description: National Railroad Safety Services, Inc. (NRSS) is seeking a Roadway Worker In Charge (RWIC) to support railroad flagging services for Class 1 Railroads, Regional Short Lines, Transit Systems, State DOT's, as well as Railroad Suppliers, Contractors, and Consultants alike. Required Education: High School Diploma or Equivalent. Required Experience: Minimum 2 years of experience with a Class 1 Railroad, Regional Short Line, Transit System, State DOT Rail Division, Railroad Supplier, Railroad Contractor, and/or Railroad Consultant; preferably within the Maintenance Of Way (MOW) Department. Key Success Factors: • Accountability: Accept full responsibility for self and contribution as a team member., • Adaptability & Flexibility: Ability to consider a variety of issues that exist in the work place and change from one task to another as necessary., • Analytical Thinking: Ability to analyze and synthesize information to understand issues, identify options, and support sound decision making., • Attention to Detail: Ability to work in a conscientious, consistent, thorough manner, and attend to details while pursuing quality when accomplishing tasks., • Communication: Ability to clearly convey information and ideas through a variety of media to employees/clients in a clear and succinct manner., • Customer Service Focus: Ability to provide service excellence to internal and/or external clients., • Decision Making: Ability to identify/understand issues, problems, opportunities and take appropriate action based on available facts, constraints, and probable consequences., • Initiative: Ability to identify what needs to be done and take action before being asked., • Innovativeness: Ability to devise new plans for quality excellence., • Knowledge: Ability to navigate various rulebooks and/or regulations and demonstrate mastery., • Organization: Ability to maintain materials and/or records in a clean and ordered manner., • Planning: Ability to plan and prioritize work load to manage time effectively and accomplish assigned tasks., • Stress Tolerance: Ability to maintain stable performance under pressure or opposition (such as time pressure or job ambiguity)., • Teamwork: Promote cooperation and commitment within a team environment to achieve goals and deliverables., • Proficient computer skills in basic email, phone, and text message applications., • Proficient computer skills in Android OS; on tablet & smart phone., • Proficient computer skills in Citrix Applications., • Strong oral and written communication skills., • Strong technical knowledge in Railroad Engineering, Railroad Design, Railroad Construction, and Safety., • High level of accuracy and attention to detail; well organized., • Demonstrated ability to develop and maintain strong client relationships., • Ability to travel for extended periods of time; sometimes month(s) at a time., • Provide jobsite coordination., • Provide clear and concise communication with Dispatchers, Train Crews, other Railroad Personnel, and/or Contractor personnel., • Provide clear, concise, and thorough job briefings with all personnel on each job site., • Enforce all Railroad, State, and Federal Policies., • Identify rule violations and resolve in accordance with Railroad, State, and Federal Policies., • Enforce Contractor training requirements., • Submit daily field reports detailing Contractor and/or Railroad activities. Physical Demands: The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. • Must be able to hear, speak, read, and write clearly in English., • Must be able to drive long distances and/or travel by other modes as necessary., • Must be able to stand for long periods of time and/or walk on level/uneven ground., • Must be able to see up close, distances, colors and have use of peripheral vision and depth perception., • Must be able to tolerate extreme heat/cold temperatures., • Must be able to tolerate dusty/noisy conditions., • Medical, Dental, Vision, Life Insurance, • Short Term, Long Term Disability Insurance, • Paid Vacation and Holidays Safety Commitment: All employees of all levels are to remain committed to safety at all times while employed at National Railroad Safety Services, Inc. (NRSS). As such, no job is so important and no service is so urgent that we may not take time to perform all work safely. Simply put, safety is our way of life. By placing safety first, we not only ensure the wellbeing of our employees, customers, and communities, but we hold true our commitment to being the leader in safety throughout the Railroad Industry. Closing Statement: National Railroad Safety Services, Inc. (NRSS) is an Equal Opportunity/Affirmative Action Employer. Any candidate selected for this position must be able to successfully pass pre-employment/recurrent background checks, drug/alcohol testing, and classroom training. Job Posted by ApplicantPro

Select hardware and formulates engineering design based on project requirements Reviews system design for compliance with engineering best practices, appropriate regulations and codes, company standards, contract requirements and related specifications Formulates and performs factory acceptance test

Job Title: System Engineer Trader Voice Location: New York, NY Duration: 12+ Months Contract Job Description: The System Engineer Trader Voice role is to provide technology leadership for developing, integrating, and supporting Client Health’s Technology Voice Services. QUALIFICATIONS: 5+ Years’

Job DescriptionCOMPANY SUMMARY Empire State Realty Trust, Inc. (NYSE: ESRT) is a NYC-focused REIT that owns and operates a portfolio of well-leased, top of tier, modernized, amenitized, and well-located office, retail, and multifamily assets. ESRT’s flagship Empire State Building, the “World's Most Famous Building,” features its iconic Observatory, ranked the #1 Top Attraction in New York City for the fourth consecutive year in Tripadvisor’s 2025 Travelers’ Choice Awards: Best of the Best Things to Do. The Company is a recognized leader in energy efficiency and indoor environmental quality. As of June 30, 2025, ESRT’s portfolio is comprised of approximately 7.8 million rentable square feet of office space, 0.8 million rentable square feet of retail space and 743 residential units. More information about Empire State Realty Trust can be found at esrtreit.com and by following ESRT on Facebook, Instagram, TikTok, X, and LinkedIn. The dedicated team at ESRT is a collection of diverse individuals with a shared passion for excellence and a keen eye toward future growth. Headquartered in New York City, we harness the energy of the city in everything we do. We care for one another, work hard, and have a lot of fun doing it! We are Certified™ as a Great Place to Work® by the global authority, Great Place to Work®, on workplace culture, employee experience, and leadership behaviors. We prioritize and invest in the health and wellness of employees to attract, develop, and retain top-tier talent. ESRT values continuous employee development and encourages colleagues to excel in their roles and adapt to emerging business needs. From our crown jewel, The Empire State Building, to incredible buildings modernized for the 21st century, to outstanding customer service, and our decade-long leadership position in sustainability and energy efficient portfolio that is 100% fully powered by renewable wind electricity, we take pride in our work. ESRT seeks an equally passionate colleague to join the team, understand the vision and help achieve that vision. POSITION SUMMARY The Assistant Property Manager will play a crucial role in overseeing the comprehensive management of all building operations for approximately 1 million square feet of Class A office space. This role involves overseeing building staff, coordinating tenant services, and ensuring compliance with building policies and procedures. The Assistant Property Manager will also support the Property Manager in developing budgets, managing special projects, and maintaining property files and records. This position requires strong supervisory and administrative skills, a basic understanding of electrical and mechanical systems, and the ability to handle multiple tasks effectively.RESPONSIBILITIES • Establish and maintain procedures to properly administer all purchase orders processing, payroll administration, accounts payable, accounts receivable, and related correspondence, • Utilize working knowledge of all building accounting systems, accruals, and reclassification, • Assist Property Manager in developing annual budgets, quarterly reforecasts and monthly variances, including Operating, Tenant Improvement, and CapEx projects, • Provide knowledgeable of ownership’s policies and procedures and Union (32B-J, Local 94) Commercial Building Agreements, • Administer all special projects that are assigned by the Property Manager and Portfolio Manager, • Assist Property Manager in ongoing leasing program including review of leases for compliance, notification, updates, escalations, late charges, statements, and insurance compliance, • Assist in the coordination of tenant move-ins and outs and completion of associated paperwork, • Coordinate with Property Manager in the issuance of notices relating to tenants, security, janitorial, or project issues, • Oversee engineering and building staff, meet with the Chief Engineer and/or Superintendent on a daily basis to coordinate ongoing work and the building’s repair and maintenance program, • Direct the day-to-day operations of the security and cleaning contractors, • Schedule overtime and vacations to provide adequate coverage of building functions, • Ensure adequate and qualified replacements when absences or vacancies occur in the security and cleaning staffs, • Manage the operation of tenant service requests, ensuring timeliness of service calls and the proper dispatch of requests to building trades, • Assign and monitor maintenance and custodial tasks as called for by tenant or management request, • Coordinate special work orders, trash removal and freight car usage, • Assign work priorities, • Ensure employee duties/responsibilities and building policies/procedures is understood by the staff, • Update reports for weekly and monthly meetings with ownership, • Implement and maintain property files, manuals, and records, • Assist in monitoring all on-going maintenance/construction projects performed by external contractors, • Coordinate all "Slip & Fall" and related bodily injury insurance issues utilizing full knowledge of all building insurance coverage and report all accidents with complete details to insurance carrier, • Maintain current required insurance certificates for contractors and vendors, • Assist Property Manager in contract bid process including preparation of RFP documents and bid evaluation, • Review and evaluate fire safety system permits to ensure compliance with applicable fire codes, • Oversee all required training including, but not limited to OSHA, Hazard Communication, Mold, Asbestos, Fire Safety, etc. on an as-needed basis and distributes relevant memorandums, • Analyze and oversee the maintenance of all building inspections and records, • Coordinate and advise of emergency trade responses with management and trades, • Perform daily inspections to ensure building standards are being adhered to and enforce in-house cleaning programs, cleaning contracts, and performance of routine maintenance tasks, • Inspect areas under construction daily, • Coordinate building service (i.e., freight, security, cleaning, engineering, fire watch) for after-hour construction, maintenance, tenant moves, and any other special projects, • Work with HR department on any disciplinary action, • Meet with tenants on a regular basis to ensure tenant satisfaction, • Prepare monthly overtime reports and reallocate labor costs to projects as needed, • Assist the Property Manager on ad hoc analysis and reporting, • Evaluate lease proposal from an operation and LL work perspectiveWHAT SUCCESS LOOKS LIKE, • Be self-driven, • Make strong communications a core competency, • Have a positive attitude and be a forward thinker, • Have a long-term strategy and set goals, • Find opportunities where others see obstacles, • Be decisive, curious, and engage your tenants, colleagues, and staff, • Present a well maintained, operational, safe propertyREQUIRED SKILLS / ABILITIES, • Ability to handle multiple tasks, coordinate, manage, and communicate effectively, • Proven experience leading and supporting performance management processes for direct reports, including goal setting, regular feedback, development planning, and performance evaluations to drive individual and team success, • Strong administrative skills, • Basic understanding of electrical/mechanical systems, and construction, • Maintain a professional presence, • Knowledge of Yardi and Building Engines preferred, • Basic Project Management experience a plusEDUCATION & EXPERIENCE, • Bachelor's degree or equivalent experience, • Minimum of five (5) years property, maintenance and construction experience, • Minimum of three (3) years supervisory and management experiencePHYSICAL REQUIREMENTS, • Prolonged periods of sitting at a desk and working on a computer, • Must be able to lift up to 15 pounds at times, • Periods of prolonged walking inclusive of ascending up and down stairs for building inspectionsWHAT YOU CAN EXPECT, • At ESRT, like our tenants, our employees come from everywhere. We foster a collaborative work environment that captures top talent and cultivates the best ideas. As a Great Place to Work® Certified employer, we are committed to maintaining our positive work culture where employees are engaged and can grow and develop. In addition, ESRT employees embody our Company Culture & Success Factors -, • Adaptable – you are a self-starter who’s able to quickly digest and execute new processes to work both collaboratively and independently, • Dynamic – you are solutions-oriented, aim to improve processes and implement efficiency, and offer insightful feedback to improve ESRT, • Dependable – you take a strong sense of ownership and accountability over your work, • Passionate – you keep up with industry trends and are excited about the potential to propel the industry forward with a “roll-up-your-sleeves” attitude, • Curious – you consistently look for new ways to work smarter, not just harder, • Ethical – you treat others with respect, act with integrity in how you perform your work, and embrace our collaborative culture, • Positive – you possess a service-oriented attitude with excellent follow through BENEFITS, • Competitive base salary and bonus, • Health/Dental/Vision insurance, • Company sponsored Life, AD&D, STD (with Salary Continuation), and LTD Insurance, • Voluntary Enhanced LTD Program, • Voluntary Hospital, Accident, and Cancer Programs, • 401(k) with 100% match up to 5%, • Paid parental leave, • Pre-tax transit accounts, • Employee Assistance Program for emotional, financial, and legal supportWELL-BEING, • Generous paid time off, • Flex remote work time, • Flex Summer Fridays, • Employee engagement programs, • Volunteer time off, • Continuing education, • Complimentary Empire State Building Observatory access, • Complimentary gym membership and other wellness benefits

Title: Contract Processor Location: Long Island City Queens NY Duration: Indefinite / Full Time Explain the function(s) to be performed by the requested staff member: • Prepares processes and monitors contract solicitation packages and related addendums. Ensure that all relevant documents are review in a timely, thorough, and professional manner, following established client policies, practices, and procedures. (a) Appropriate prioritization of documents occurs. (b) Good quality work products generated., • Reviews bid documents submitted by the Architecture & Engineering, and Project Management Divisions., • Assists Contractors and Consultants in all aspects of the bid & award and prequalification process and ensured bidders’ compliance with the client bidding requirements., • Updates computer files on each project and acts as a liaison between Contractors and the SCA’s staff. Process requests for additional funding prior to award., • Prepare process and manage the sealed bid solicitation Request for Contract (RFC) process for various client projects related to mentor, capital improvements, requirements, and new constructions., • Analyze scope of work and cost estimates., • Communicate with Architect & Engineer, Construction Management, Prequalification Unit, Business Development Division and Various Other Departments as needed for revisions and updates, and subsequent readiness for the bidding process., • In coordination with Construction Management and A & E, review and respond to contractors’ questions and comments received during the bidding process., • Function as the Bid Opening Official for the client., • Maintain computer information system to provide data for planning and control of all projects and maintain spreadsheets tracking the status of said projects.

Position Title: Electrical Foreman Classification: Non-Exempt Department: Operations & Facilities Dept (Local 3 – House Electric) Supervisor: Director of Facilities Hourly Rate: $‎66.50 (Based on Local 3 - Electricians CBA) The Javits Center is considered the busiest convention center in the United States, hosting the world's leading conventions, trade shows, and special events on Manhattan's West Side. These large-scale events have generated billions of dollars in annual economic activity for New York City and New York State, supporting thousands of jobs in and around the facility. Located on 11th Avenue between West 34th Street and West 40th Street, the iconic structure has played a prominent role in New York’s recovery and resurgence, and with a state-of-the-art expansion project recently completed, the venue features more than 850,000 square feet of total exhibition space, two new floors of meeting room space, a rooftop pavilion and terrace, as well as a range of catering, sustainability, and technology services. Position Summary: The Electrical Foreman is responsible for assisting with the inspection, installation, scheduling, calibrating, testing, repairs & maintenance of all electrical systems and equipment for the interior and exterior of the Javits Center buildings. The position requires assisting with managing, scheduling and supervising staff, contractors, and electrical projects to include procurement of equipment, supplies and materials. Provides technical assistance to the center’s functional shops, trades and departments. Coordinates energy management efforts and responds to energy demand needs. Interested candidates must be willing to work full-time onsite at the Javits Center. Essential Functions: • Installations, diagnoses, repairs and services of high, medium and low voltage electrical power distribution systems, including IT infrastructures ( CAT 6 cabling, Fiber and CCTV ) and automated controls for large commercial building systems., • Electrical installation, electrical feeders testing and repairs for HVAC (Heating, Ventilation and Air Conditioning) elevators, escalators, emergency power generators, electrical and mechanical equipment, BacNet Fiber and CAT 6 IT Cabling, variable frequency drives, and building automation integration., • Diagnose, test, and calibrate systems for better energy consumption; loop tuning and system responsiveness., • Understanding of BacNet integration, PPCL (programmable power control logic)., • Generate, document, and share detailed technical electrical / electronic data and energy reports as well as full design interpretation and understanding of electrical and electronic drawings, schematics, literature, sketches, shop drawings, designer and manufacturer specifications for high tension, medium and low voltage power distribution., • Proficient in testing, installing, setting up, maintaining data and communications cabling for switches, servers and computers onsite., • Experienced in Microsoft Office, lighting distribution, IT cabling and technology controls, and building management systems., • Installation, testing, repairs, and maintenance of life safety systems (fire alarm, smoke controls, electrical components of fire sprinklers system and fire suppression systems)., • Ability to provide on-site staff training on automated controls system operations., • Skillful in the repairs, maintenance, and use of Siemens DESIGO, Building X, Digital Twin software, fire alarm, and ARC (Auxiliary Radio Communications) systems, electrical meters, and electrical testing tools and equipment., • Knowledge of modulators, encoders, decoders, optical receivers, optical transmitters, multiplexers, amplifiers, multi- meter, and Trilithic (broadband communications)., • Knowledge of testing and measuring equipment, radio frequency microwave components, fire alarm and emergency smoke control systems, digital and analog meters, electrical digital analyzers, optical time-domain reflect-o-meters (OTDR), and electrical infrared testing., • Full responsibilities for service, repairs, and maintenance to primary and secondary power distribution systems to include main primary switchgears, secondary paralleling switch gears, substations, Step-up, down and isolating transformers, Automatic Transfer Switches, motor control centers & VFD’s, normal & emergency power panels and lighting electrical panels, including associated controls and software., • Ability to implement and generate planned scheduling, reports, estimates, material take offs, and energy trend reports for energy consumption, emergency load reduction (load shedding and balancing), and comfort control systems., • Follow and support Local 3 CBA agreement, managerial goals, objectives, and the Javits Center’s policies and procedures. Qualifications: • Must be able to perform essential functions of the position with or without reasonable accommodation., • Preferred New York licensed electrician or electrical engineer, • 10 years of experience and full understanding of National, State and City electrical codes to include but not limited to NEC, NFPA, DOB, NYS, DASNY, FDNY, and NYC building electrical codes., • Full OSHA, LOTO (Lock Out- Tag Out) and ARC Flash Safety understanding., • Local 3 – Classification “A” – Journeyman / Wireman., • Inventory control, par stock, FIFO, and Just in Time ordering., • Ability to manage technical building control systems, including PLC (Programable Logic Controllers), ASCO PMS (Power Management Systems), and Electrical Sequence of Operations controls including Manufacturer and Design algorithms., • Must have electrical, instrumentation, electronics, design, repair & maintenance or similar industry experience., • Must have electrical controls and mechanical experience., • Must have computer skills (Microsoft Office, NetSuite), graphics navigation software, Life Safety Systems & Fire controls, Solar PV, PMS, CMMS, and BMS/BAS., • Ability to work under time constraints and be able to multi-task., • Ability to analyze problems quickly and accurately and to implement effective courses of corrective action. Special Conditions of Position: • Must have a valid driver’s license and technical certifications., • Required flexibility to allow for evening, weekend, and holiday coverage when needed., • Must be able to work in high elevations utilizing scissor lifts, boom lifts, and scaffolds., • Must be able to lift 50 Lbs. regularly and 35 lbs. constantly., • Must be able to stand and walk for extended periods of time., • Will be subjected to routine indoor and outdoor work and exposure to climate changes and extreme weather conditions. The policy of this company prohibits any employment practice which in any way discriminates or tends to discriminate against any person, employee, or employment with respect to conditions or privileges of employment because of an individual’s race, color, religion, national origin, ancestry, marital status, non-job-related disability, past service in the Armed Forces of the United States, sex, or age as provided by law. NY CONVENTION CENTER OPERATING CORPORATION IS AN EQUAL OPPORTUNITY EMPLOYER. In adherence to our commitment to fostering an inclusive and accessible workplace, the Javits Center extends its dedication to providing reasonable accommodations. Candidates requiring adjustments during the application process or employees seeking workplace accommodations are encouraged to liaise with our Human Resources department. Our organization is unwavering in its resolve to ensure equitable opportunities, and a workplace environment characterized by support and fairness for all.

Job Description C++ Software Engineer – Real-Time Market Data & Trading Systems Location: Midtown Manhattan (Hybrid – 2 days/week) Overview: A leading technology-driven trading firm is seeking a C++ Software Engineer to join its Real-Time Market Data & Trading Systems team. This group builds performance-critical infrastructure for market connectivity and algorithmic execution. The role is ideal for a developer with a passion for low-latency systems and the desire to work at the intersection of engineering and high-frequency trading. Opportunities exist for technical ownership and future leadership. Core Responsibilities: • Develop and maintain ultra-low-latency, multi-threaded C++ applications, • Build and optimize real-time market data feed handlers and messaging infrastructure, • Contribute to algorithmic execution components and system-level enhancements, • Work with exchange protocols including socket-based APIs and FIX, • 3–10+ years of experience with C++ in high-performance environments, • Deep knowledge of multithreading, memory management, and socket programming, • Prior work on market data systems, trading platforms, or latency-sensitive infrastructure, • Proficient in Linux development environments, • Experience with FIX protocol and/or trading system architecture, • Python scripting familiarity is a plus

Job DescriptionJob Title: Sr. Security EngineerDuration: 6 months Contract To HireLocation: Looking for someone near our physical NY office (NYC) and datacenter (Weehawken, NJ) who could support on-site physical equipment (powering off a firewall, checking cable connectivity, shipping equipment, configuring equipment that is not remotely accessible). About the PositionClient X is seeking an exceptional Senior Security Engineer to join its IT Security Team in our New York office. This person will join a distributed, highly collaborative team that is responsible for the setup and maintenance of security equipment for a global network. The successful candidate will demonstrate strong technical skills and will have the technical credibility to be a lead participant in the architecture, design, and implementation of complex security solutions including interconnectivity with third party partners and market data providers and DMZ configuration and hardening. In addition to exceptional technical skills, the ideal candidate will demonstrate an ability to provide the highest level of support for troubleshooting incidents. Experience with updating problem records in an incident tracking system is needed and he or she must be comfortable interacting with various individuals or in an ever-changing environment. This person will help to lead projects where close coordination and communication is required with other areas such as the networks, database management, system services, and application development organizations. The ideal candidate will have at least eight years of hands on technical experience with firewall design and implementation with physical and\or virtual Next Generation firewalls and will have at least three years of experience in working with cloud implementations. Experience with automation technologies such as Ansible Tower would also be helpful. Specific Responsibilities Include • Operational management of security platforms including, but not limited to, firewalls, load balancers, web proxies, endpoint security technologies., • Documentation and implementation of firewall policy and rule changes., • Manage physical equipment such as the rack, stack and installation of security equipment in any company location including enterprise data centers, • Assist in supporting the security platforms protecting our enterprise systems and environment, • Assist and train team members in the use of cloud security tools and the resolution of security issues, • Provide technical support for complex, medium to high risk systems problems, • Instill cooperation and/or resolve problems on security related activities that span other areas such as network, database management, applications development, and other systems related areas, • Implement automated approach to delivering key security management processes, • Communicate security risks and solutions to business partners, platform & product teams, • Partner with Security Architecture to evaluate cloud security technologies, provide feedback on designs, and implement processes and integrations of highly complex solutions., • Develop procedures for automating security tasks during build and deployment Skills & Experience Required:, • Bachelor’s degree with a degree in Computer Science, Computer Engineering, EE or comparable discipline preferred, • Eight plus years of hands on firewall design, implementation, and change management experience with physical and\or virtual Next Generation firewalls., • Three plus years of hands on experience working with cloud implementations, • Extensive knowledge with relevant experience in at least five of the following categories:, • Serve as a project lead or a project member on projects of varying size and complexity and risk., • Third party and VPN connectivity architecture and design, • DMZ network segmentation design best practices, • Intrusion Detection/Prevention System tuning, • Security hardening and configuration techniques, • Application firewall design, • Antivirus / Endpoint protection design and implementation, • Patching and vulnerability remediation management, • Web Proxy architecture / design, • Cloud (IaaS, PaaS, and SaaS) hosted security solutions, • PKI and certificate management concepts, • Preferred security certifications:, • PCNSA, • Microsoft Azure security Engineer Associate, • CISSP, • GSEC, • GCIH, • GMON, • Sufficient level of knowledge in other technical areas such as database management and networking so incumbent can represent his/her area on major cross functional problems that span other areas, • Broad knowledge of monitoring tools, • Diagramming using Visio or equivalent tools, • Excellent organizational skills and superior troubleshooting / problem solving ability

Job Description Jaros, Baum, and Bolles (JB&B) is an engineering firm headquartered in New York with additional offices in Boston and Philadelphia. Our firm works with cutting-edge engineering technologies to facilitate high-performance building designs for ever-improving engineering and sustainability solutions. We are seeking a Senior Project Engineer to join the Electrical department at our NY, Philadelphia, or Boston office. The Senior Project Engineer is a technically skilled and experienced engineer with excellent communication, coordination, project management and leadership skills. This role typically manages one to two smaller projects and is the key designer on larger base-building and infrastructure upgrade projects. Responsibilities • Leads the design on Tenant fit-out projects and is a key designer on base building/infrastructure upgrades; assembles riser diagrams, schedules, and floor plans; participates in specification writing., • Establishes design criteria from the project proposal and assembles basis of design documents., • Assembles a complete set of contract documents for their trade including the lay out main equipment rooms, closets, shafts, risers, etc., • Leads design for their trade’s ancillary systems required for a project and can assemble scope associated drawings with these systems (e.g. UPS, generators, fuel, secondary water pumps, water reclamation system, etc.)., • Reviews shop drawings, RFI’s, Contractor change orders, performs site visits and punch-lists with limited supervision to verify that designs are being implemented accurately., • Assists in establishing an efficient project schedule for his/her project team that ensures appropriate use of resources while adhering to deadlines., • Minimum 5 years of experience, • Bachelor’s degree in Electrical Engineering, • Strong understanding of trade-specific scope of project, trade-related codes, and the required coordination with other trades, • Strong understanding of documentation requirements and content for each deliverable phase (e.g., SD, DD, CD and specifications), • Hybrid workplace offering the flexibility to work both from home and the office., • Comprehensive benefits package including 401k employer match., • Paid time off (PTO), paid parental leave and inclusive holidays., • Training and professional development courses through JB&B University., • Multiple employee resource groups. Jaros, Baum & Bolles is an equal-opportunity employer. All qualified candidates will receive consideration for employment without regard to race, ethnicity, color, religion, sex, sexual orientation, gender identity, national origin, age, disability, marital status, military veteran status, unemployment status, or any other status protected by law. Powered by JazzHR BzEC0aSi66

Job Description The Electrical Controls Engineer is an integral part of Champion’s continued success in applying process automation and SCADA solutions. This critical, high-profile position is primarily focused on design and implementation of PLC control and SCADA data visualization solutions which incorporate automation, energy monitoring and optimization system analytics. Responsibilities/Essential Functions: · Design engineered submittals for control systems projects · Programming, configuring and maintaining PLC programs and SCADA systems · Deploying and configuring SCADA objects to support data acquisition from field assets as they are brought online and changed in the field · Creation and binding of animated visualizations of system graphics and operator interface screens · Create and enforce project specific standards; augment and enhance solutions; benchmark individual and application performance metrics as well as estimate the level of effort for initiatives. · Commissioning and startup for projects including instrumentation and controls The ideal candidate should meet the following qualifications: Minimum Requirements: · BS in Engineering, Computer Science, or equivalent experience · Minimum of 4+ years of experience with PLC/HMI/SCADA and AutoCAD applications · Experience in Water, Waste Water Applications and/or Moveable bridge Automation · Proficiency reading and understanding electrical control plans and specifications · Solid understanding of control and process logic, various communications protocols (Ethernet/IP, MODBUS, TCP/IP), and network communications infrastructure · Experience in FactoryTalk, Wonderware, & iFix software · Experience writing PLC programs (ladder logic minimum) and basic HMI scripts · Experience in selecting, calibrating, and startup & commissioning of process control instrumentation Company DescriptionChampion Controls is a leading control systems supplier providing system integration and engineering design services, as well as manufacturing of custom control panels for a variety of markets. We hold Underwriters Laboratory (UL) certifications for the USA and Canada as a manufacturer of industrial control panels, as well as industrial control panels relating to hazardous locations. We employ a staff of talented professional engineers, electrical technicians, and sales people, who can meet your project needs including providing turnkey installations.Champion Controls is a leading control systems supplier providing system integration and engineering design services, as well as manufacturing of custom control panels for a variety of markets. We hold Underwriters Laboratory (UL) certifications for the USA and Canada as a manufacturer of industrial control panels, as well as industrial control panels relating to hazardous locations. We employ a staff of talented professional engineers, electrical technicians, and sales people, who can meet your project needs including providing turnkey installations.

Job Description We are currently hiring a mid-level Mechanical Engineer in our Building Engineering Division – Energy Infrastructure team in our Brookyln, NY office. LaBella’s Energy Infrastructure team provides comprehensive energy efficiency and renewable energy consultancy, including feasibility analyses, and design of mechanical systems. Our engineers are well-versed in all aspects of building and energy systems design relating to a variety of new construction, renovations, and design/build projects for a variety of clientele. The Mechanical Engineer will work with our engineers in a lead role on a variety of decarbonization/electrification projects to develop projects in feasibility stages all the way through design and construction. A successful candidate will be able to work well in a team, mentor junior engineers, and communicate effectively with clients. Duties • Lead design of building HVAC systems and district energy systems, • Field investigations to document existing conditions, • Selection and calculations for design purposes, • Work with Jr Engineers to develop and review project drawings and documentation, • Interact directly with clients by completing analysis of design options, cost benefit comparisons, and communicating results to assist in decision making process., • 8-10 years of relevant experience, • Bachelor’s degree in Mechanical Engineering is preferred, • Well-rounded experience in HVAC and hydronic system design, • Preferred: experience designing geothermal or district energy systems, • Experience with Revit or AutoCAD, • New York State Professional Engineer’s license is a plus, • Excellent verbal and written communication skills Salary Range: $80,000 - $120,000 per year The specific salary offered may be influenced by a variety of factors including but not limited to the candidate's relevant experience, education, and work location. Benefits Body, mind, and wallet—LaBella’s benefits support a holistic approach to your health and wellness, creating the foundation for physical, mental, and financial well-being. Our benefit offerings cover the must-haves (healthcare and retirement), the just-in-cases (insurances and employee assistance programs), and the cherry-on-tops (fitness reimbursements, year-end incentive pay, and tuition assistance). Visit our website for more details on benefits listed below. • Flexible Work Schedule, • Health/Dental Insurance, • 401k Plan with Employer Match, • Short & Long Term Disability, • Profit Sharing, • Paid Time Off, • Leadership Development Program, • Fitness Reimbursement, • Tuition Reimbursement, • Referral Bonus Program, • Wellness Program, • Team Building Events, • Community Service Events

Job DescriptionAbout the CompanyFounded in 2018 by professors of Yale University and Columbia University, CertiK is a pioneer in blockchain security, utilizing best-in-class AI technology to secure and monitor blockchain protocols and smart contracts. CertiK’s mission is to secure the cyber world. Starting with blockchain, CertiK applies cutting-edge innovations from academia into enterprise, enabling mission-critical applications to be built with security and correctness. CertiK is one of the fastest growing and most trusted companies in blockchain security and has become a true market leader. Our clients include leading projects such as Aave, Polygon, Binance Smart Chain, Yearn, and Chiliz. Our investors include top VCs like Tiger Global, Coatue Management, Shunwei Capital and Hillhouse Capital as well as industry leaders like Coinbase Ventures and Binance. About the PositionWe are seeking a skilled IT/Blockchain Infrastructure Engineer to join our team. In this role, you will be responsible for designing, implementing, and maintaining our cloud infrastructure and various IT services to ensure optimal performance and security. You will work closely with cross-functional teams to support our organization’s technological and operation needs. Responsibilities • Design, implement, and manage blockchain infrastructure, including validator and data nodes, as well as various services that support the blockchain, • Monitor system performance and troubleshoot issues to ensure high availability and reliability, • Implement security protocols and measures to protect sensitive data and systems, • Provide fundamental support for IT services usage, • Conduct regular system backups and disaster recovery planning, • Document infrastructure configurations, processes, and procedures, • Stay current with emerging technologies and industry trends to recommend improvementsRequirements, • Bachelor’s degree in Computer Science, Information Technology, or a related field, • Proven experience in implementing and maintaining Blockchain infrastructure, • Proven experience as an IT/Infrastructure Engineer or similar role, • Strong knowledge of server management, and cloud technologies (e.g., AWS, Alicloud), • Proficiency in scripting languages (e.g., Python, Bash) and automation tools, • Excellent problem-solving skills and attention to detail

Job Description Atto Trading, a dynamic quantitative trading firm founded in 2010 and leading in global high-frequency strategies, is looking for a C++ Software Engineer to join our team in New York. We are expanding an international, diverse team, with experts in trading, statistics, engineering, and technology. Our disciplined approach combined with rapid market feedback allows us to quickly turn ideas into profit. Our environment of learning and collaboration allows us to solve some of the world’s hardest problems, together. As a small firm, we remain nimble and hold ourselves to the highest standards of integrity, ingenuity, and effort. Position Highlights: We are modernizing our trading and research platform to scale our alpha trading business. The platform will enable researchers to explore, test, and deploy sophisticated signals, models, and strategies across asset classes, in a robust, fully automated manner, while remaining within highly competitive latency targets. You will be responsible for building, maintaining, and supporting the platform that makes this possible. Responsibilities: • Develop, sustain, and support one of the leading global trading platforms with low-latency C/C++ systems for high-frequency trading (HFT), while consistently enhancing its performance, functionality, and stability., • Conduct thorough testing and participate in comprehensive code reviews., • Implement interfaces with advanced networking hardware (FPGA, kernel-bypassing drivers), • Demonstrate proactive decision-making and self-direction, while recognizing when to seek guidance., • 2+ years of experience with developing HFT platforms and trading systems, • Experience working with C/C++, especially modern C++ in a Linux environment, • Experience in profiling and optimization, • Understanding the principles of OOP, Multithreading, and IPC, • Bachelor's degree or higher in Computer Science, Computer Engineering, or related field, • Attention to detail, ability to work to very high standards, and critical mindset, • Ability to manage multiple tasks in a fast-paced environment, • An attitude of doing, building, and learning Nice to have: • Knowledge of operating systems, kernel-level understanding of device-level support in Linux., • Knowledge of Financial Instruments (Stocks, ETFs, Futures, Options)., • Experience with various market data and order entry protocols (ITCH, OUCH, PITCH, CME MDP), • Competitive rates of pay., • Paid time off (5 weeks)., • Coverage of health insurance costs., • Office lunches. Our motivation: We are a company committed to staying at the forefront of technology. Our team is passionate about continual learning and improvement. With no external investors or customers, we are the primary users of the products we create, giving you the opportunity to make a real impact on our company's growth. Ready to advance your career? Join our innovative team and help shape the future of trading on a global scale. Apply now and let's create the future together!

Job Description Senior Data Engineer $150k - $170k Company Description We are a leading cloud-based mobile patient intake and registration system. Our platform allows patients to complete their paperwork from the comfort of their own homes using their smartphones or computers, minimizing in-person contact and streamlining the check-in process. With our fully customizable patient scheduling, intake, and payment platform, you can maximize efficiency and minimize waiting room activity. Our patient engagement solution also syncs seamlessly with your EMR system to keep records updated in real-time. Role Description This is a full-time position for a Senior Data Engineer. As a Senior Data Engineer, you will be responsible for the day-to-day tasks associated with data engineering, including data modeling, ETL (Extract Transform Load), data warehousing, and data analytics. This is a hybrid role, with the majority of work located in the New York City office but with flexibility for some remote work. Qualifications • Data Engineering, Data Modeling, and ETL (Extract Transform Load) skills, • Data Warehousing and Data Analytics skills, • Experience with cloud-based data solutions, • Strong problem-solving and analytical skills, • Proficiency in programming languages such as Python, PySpark or Java, • Experience with SQL and database management systems, • Knowledge of healthcare data requirements and regulations is a plus, • Bachelor's degree in Computer Science, Engineering, or related field If interested, please send your resume to:

Job Description Atto Trading, a dynamic quantitative trading firm founded in 2010 and leading in global high-frequency strategies, is looking for an HPC Engineer to join our team. We are expanding an international, diverse team with experts in trading, statistics, engineering, and technology. Our disciplined approach, combined with rapid market feedback, allows us to quickly turn ideas into profit. Our environment of learning and collaboration allows us to solve some of the world’s hardest problems together. As a small firm, we remain nimble and hold ourselves to the highest standards of integrity, ingenuity, and effort. Position Highlights: We are seeking a highly skilled and visionary Principal HPC Engineer to support and enhance our expanding HPC platform. This role requires deep technical expertise and the ability to drive innovation across container, compute, storage, networking, and scheduler architectures. The ideal candidate will work closely with research and technology teams, key vendor partners, and internal and external open-source communities to develop next-generation HPC solutions. Key Responsibilities: • Leading the design, development, and optimisation of large-scale HPC infrastructure, including compute, container, storage and networking layers., • Shaping and scaling the HPC roadmap in partnership with Research and Engineering teams., • Researching, evaluating and integrating emerging technologies such as GPUs, DPUs, AI-driven workflows, storage solutions, and high-speed interconnects., • Defining best practices for cluster management, workload scheduling, data lifecycle and sustainable operations. The ideal candidate will have the following skills and experience: • 5+ years’ experience in HPC architecture, research or large-scale infrastructure design., • Deep knowledge of HPC cluster design, parallel computing and high-speed networking (e.g. InfiniBand, RDMA, RoCE)., • Experience with NVIDIA GPU computing, CUDA, AI/ML accelerators and high-density compute architectures., • Strong background in distributed storage systems such as VAST, Weka, Lustre, Ceph and GPFS., • Proficiency in HPC workload schedulers (e.g. Aramda, Slurm, PBS, Kubernetes-based orchestration)., • Excellent analytical and problem-solving skills., • Deep passion for trading., • Passion for continuous learning., • Strong sense of responsibility and ownership mindset., • Competitive rates of paу., • Paid time off., • Coverage of health insurance costs., • Discretionary bonus system.

Job Description Interested in building the next viral IOS app – even bigger than Duolingo? Imagine a world where studying feels like play—where SAT prep is as addictive as scrolling through TikTok or diving into a game of Geoguessr/Trivia Crack. That’s exactly our mission – make learning FUN. And we’re bringing it to life by building Duolingo... for school. We call it Brainblast, and we need YOU to help us build it. We’re turning studying into a game – a cracked out, viral iPhone game. To learn more about our vision & the app, visit brainblast.com. About us: Brainblast is a new product by Smart Nonsense – a media company making learning fun with over 3 billion views generated worldwide. Requirements The Role: This is a fully remote position, open to candidates worldwide. As the sole engineer/dev, you’ll need to take on full-stack responsibilities ensuring smooth front-end and back-end interactions. You will… • Take full ownership of developing, launching, and maintaining the iOS app, • Build rapid prototypes for internal testing 2-3x/week, • Develop an asynchronous game experience where users solve and send math problems to friends., • Implement analytics to track student progress and help users identify weak areas for improvement., • Take ownership of formatting and integrating question banks into the app., • Build a seamless content delivery system for a TikTok-style mobile video course., • Optimize the app for a highly engaging, fast, and smooth learning experience., • Ensure the app is scalable, maintainable, and bug-free through rigorous testing and code reviews. Who you are: You’re not just an executor—you’re an innovator. You thrive on creativity, constantly pushing boundaries with crazy, forward-thinking ideas. You don’t wait for direction—you help define what’s next with a strong sense of urgency. Qualifications: • 3+ years of professional software experience in iOS app development., • Shipped at least one iOS app professionally, • Proficient with Swift, IOS frameworks (UIKit, CoreData, Core Animation, etc.) and IOS SDK performance tools., • Experience with Experience with RESTful APIs & other API integrations, • Knowledge of video streaming and optimization, • Familiarity with Firebase or other backend solutions. 1. Above-market pay, 2. Work from home – No meetings, schedules, or ASAPs. Work whenever, wherever, and however you want., 3. Paid holiday & time off – The best need breaks., 4. Growth opportunities internally Our #1 goal is to work together for decades, not months.

Job DescriptionSalary: Competitive Systems Engineer Location: New York Salary:Competitive Join our team of expert engineers in the Engineering Team! Who are we? Options is the largest global financial technology company headquartered in Belfast. We are at the forefront of banking and trading infrastructure, serving clients globally with offices in New York, Chicago, Toronto, London, Cambridge, Paris, Hong Kong, Tokyo, Singapore, and Auckland. At Options, our services are woven into the hottest trends in global tech, including high-performance Networking, Cloud, Security, and AI (Artificial Intelligence). Why Options? Global travel: We have offices in New York, Chicago, Toronto, London, Belfast, Dublin and across Asia. Continuous career development opportunities: We provide professional skills development and technical training. The chance to be a part of a self-sufficient, successful team: The Options team operates in a fast-paced environment with endless opportunities for innovation and forward-thinking. Competitive salary: In addition to a competitive salary, Options reward employees with a range of bonus incentives and employee benefits. The Role As a Systems Engineer, you will act as a key point of contact for clients, troubleshooting technical issues, configuring systems, and ensuring smooth operation across deployments. This role involves regular communication with clients, mapping requirements to platform capabilities, and proactive monitoring of systems. Over time, you will develop in-depth knowledge of electronic trading environments and the tools used by some of the worlds leading financial institutions. What you will be doing • Configuring applications to meet customer requirements., • Working with Unix to configure low-latency servers to run P2D Analytics., • Troubleshooting issues with application installations., • Solving network problems using tools like P2D Analytics., • Performing health checks and proactively monitoring installations. Were looking for someone who has technical proficiency in: • Electronic trading systems (Market Data and Order Entry)., • Experience using tcpdump and/or Wireshark., • Understanding Ethernet, IP, TCP, and UDP., • Experience with Protocol Decoders., • Manipulating Unix filesystems (creating directories, editing files, etc)., • Checking the health of a system using tools like top, free, ps, etc., • System tuning using kernel boot parameters and tools such as ethtool and sysctl., • Experience in scripting (e.g., Bash, Python)., • Ability to read log files and act accordingly., • Editing XML, JSON, and ENV files., • Understanding of REST APIs and web-based systems. Were also looking for candidates with: • Strong research, writing and communication skills., • Ability to work in a fast-paced and changeable working environment., • Exceptional organisational skills and strong attention to detail., • Desire to travel and see the world., • Ability to work independently and manage your own projects in a professional manner., • A passion for innovation and the financial technology sector., • Strong interpersonal skills., • Project management skills and proven ability to manage own workload. How to apply: Please submit a CV and cover letter to the Systems Engineer position on the Options Careers Page at . On your CV, please include a section on your Hobbies and Interests. On the covering letter please detail the role you are applying to, along with your availability. If you have any questions about this position, please contact .

Job DescriptionNote: At this time, we are not able to offer visa sponsorship. Candidates must be authorized to work in the United States without the need for current or future sponsorship. N1 Health is an AI Platform company that helps healthcare organizations prioritize, action, and maximize patient and member interactions. N1 Health’s market-leading Applied AI Platform provides healthcare companies with pre-packaged models, curated third party data, and a secure and scalable technology platform that enables the deployment of targeted services at the individual, household, and neighborhood level. Data science-driven insights lead to relevant, specific, and help-first interventions that optimally connect individuals to resources based on their specific needs and the capacity of the system. Only 20% of a person’s health outcomes are driven by their interactions with the health care system, the remaining 80% are driven by external factors. We’re working to empower our customers to utilize data science and digital technologies to better serve their most vulnerable members and patients. We’re passionate, creative, and motivated and looking for team members who are the same. We are enthusiastic learners and believe fundamentally that this is a two-way street - we’ll invest in your learning and growth, just as you’ll advance the company’s mission and support our clients through your work. Role Overview We are seeking a skilled and motivated Data Ops Engineer to join our Technology Enabled Service Delivery function. In this role you will be tasked with managing the broad complexity of healthcare data and creating scalable solutions to deliver to end users. As a client-facing engineer, you will work on teams of data scientists, project managers, and expert staff to manage and understand client data, and will own data specifications, schema design, data pipelines, and ML pipelines for these teams using Python, SQL and CLI tools to maintain, automate and scale your solutions. In this role, you will also think creatively about building new tools that drive innovation for delivering consistent and reliable results, add value to your N1 teams and clients, and communicate with stakeholders about how best to deploy them to drive meaningful healthcare outcomes.. We are looking for motivated teammates who are ready to learn and grow. The Ideal Candidate • Has a demonstrated ability to work on complex projects with multiple stakeholders, • Is a proactive team-player who takes ownership and initiative on a variety of problems, • Has the ability to tell a compelling data-driven story, • Has strong written and verbal communication skills with both technical and non-technical audiences, • Bachelor's degree or education in computer science/related field, • 0-2 years of prior software engineering experience, • Proficiency in Python and SQL, or demonstrated ability to learn new languages quickly, • Proficiency using GitHub for collaborative development, • Familiarity with Agile product development, and tools such as Jira, Confluence, etc., • Excellent troubleshooting and debugging skills, • Experience working with AWS/Athena or similar cloud computing platforms (a plus), • Familiarity with Linux/CLI tools (a plus)BonusEquityIf you are excited about a role but your experience doesn’t seem to align perfectly with every element of the job description, we encourage you to apply. You may be just the right candidate for this, or one of our many other roles. We celebrate diversity and are committed to creating an inclusive environment for all employees. N1 Health is proud to be an Equal Opportunity Employer. Our vision is to foster an environment in which all N1 Health employees of diverse backgrounds and identities feel supported and empowered through the ongoing development of a shared, inclusive culture. We do not discriminate on the basis of race, religion, color, national origin, gender, gender identity, sexual orientation, age, marital status, disability, protected veteran status, or any other legally protected characteristics.

Job DescriptionCompany Description Columbia University has been a leader in higher education in the nation and around the world for more than 250 years. At the core of our wide range of academic inquiry is the commitment to attract and engage the best minds in pursuit of greater human understanding, pioneering new discoveries, and service to society. The School of Professional Studies at Columbia University offers innovative and rigorous programs that integrate knowledge across disciplinary boundaries, combine theory with practice, leverage the expertise of our students and faculty, and connect global constituencies. Through nineteen professional master's degrees, courses for advancement and graduate school preparation, certificate programs, summer courses, high school programs, and a program for learning English as a second language, the School of Professional Studies transforms knowledge and understanding in service of the greater good. Job Description Columbia University School of Professional Studies seeks industry professionals for the role of adjunct Lecturer to develop and teach Technology Integration in Project Management, a core course in the school’s new M.S. in Project Management program. The program equips individuals with the strategic, analytical, and leadership skills essential for a successful career managing complex projects across industries and borders. The course of Technology Integration in Project Management explores the integration of technology into modern project management, equipping students with the skills to navigate digital transformation and technology adoption in complex project environments. Students will gain hands-on experience with project management information systems (PMIS) and enterprise platforms such as MS Project, Asana, Trello, SAP, and Oracle Primavera, while also learning to leverage AI, automation, and data analytics tools like Power BI to enhance decision-making and performance monitoring. The course emphasizes the use of agile and hybrid methodologies supported by tech-enabled tools, preparing students to lead projects with efficiency, adaptability, and innovation in digitally driven organizations. Responsibilities * Lead in-person class lectures, instructional activities, and classroom discussions * Evaluate student work and grade assignments * Monitor student concerns and inquiries, and be the first point of contact for student questions * Hold weekly office hours * Prepare, maintain, and enhance the course in Canvas, Columbia University’s learning management system for onsite and online courses * Part‐time Lecturers who are new to SPS must complete Canvas training (online learning management system) * Attend Project Management faculty meetings * If assigned to design the course, responsibilities also include: * Develop course objectives that align with program-wide learning outcomes * Create activity maps tying course activities to objectives, ensuring industry relevance * Draft a detailed syllabus (course description, schedule, grading rubric, and assessments) for review and approval by the Program Curriculum Committee and the Committee on Instruction (COI). * Collaborate with Instructional Design to develop course materials through a consultative process. This includes partnering on course development (aligning objectives, materials, and assessments), creating dynamic instructional media (videos, infographics, and interactive resources), maintaining established courses with updates and troubleshooting, and receiving just-in-time assistance for targeted needs. Serving as an adjunct Lecturer provides an outstanding opportunity to educate and mentor students in the field of project management as well as to form a rewarding professional relationship with Columbia University’s world-class faculty. Qualifications Columbia University SPS operates under a scholar-practitioner faculty model, which enables students to learn from faculty that have outstanding academic training as well as a record of accomplishment as practitioners in an applied professional setting. Requirements * A master’s degree in engineering (e.g., civil, mechanical, or industrial), construction management, project management, operations research, technology management, business analytics, or data science (with a project management focus) * At least 8 years of experience in roles such as IT Project Manager, Technology Consultant, Digital Transformation Lead, or Systems Engineer * Hands-on experience with software selection, implementation, and integration in a project setting * Experience in cross-functional technology deployment across sectors (e.g., construction, manufacturing, tech, services) * PMP or equivalent certifications preferred * A passion for teaching, strong interpersonal and communication skills, and the ability to connect academic material to contemporary industry practices. Preferred Skills & Experience * A terminal degree in one of the above mentioned disciplines * 2+ years graduate-level university teaching experience Additional Information Compensation Range - $10,000 - $15,000 per semester-length course. Review of applications begins immediately and will continue until positions are filled. All applicants, please provide: * A resume/CV inclusive of university teaching experience -- highlight teaching at the graduate level * A cover letter * Evidence of teaching effectiveness (e.g., student evaluations of teaching, teaching observation summaries, etc.) All your information will be kept confidential according to EEO guidelines. Columbia University is an Equal Opportunity Employer / Disability / Veteran

Job Description Job Description: The Network Engineer is responsible for maintaining the design and integrity of the internal systems, including customer-facing on-premise, hosted, and cloud environments, as well as providing technical assistance to team members with system and network requests. Network Engineer Responsibilities: • Implement and maintain various managed wired and Wi-Fi networks, including hardware, system software, and applications., • Design, configure, maintain, and document network infrastructure., • Performing day-to-day Tier 2-3 technical support for all clients onsite and/or remotely., • Utilize CRM to schedule and update tickets., • Diagnose, resolve and/or escalate issues promptly via a ticketing system in a timely manner., • Collaborate closely with team members and clients to successfully meet client needs and project milestones. Network Engineer Skills: • Experience setting up and managing Microsoft Active Directory 2016, 2019, and 2022 forests, domains, domain controllers, OUs, GPOs, ACLs, DNS, and DHCP., • Experience with Microsoft Hyper V and virtualized environments., • Expert understanding of network and internet-related concepts such as DNS, HTTP, DHCP, SSL, TCP/IP., • Experience with Microsoft Azure and Microsoft 365 Cloud Computing Services., • Ability to configure and support network routers/firewalls and Layer 2 switches: inbound/outbound rules, routing, IPSEC VPN tunnels, and VLANs., • Troubleshoot and diagnose hardware/software and network problems., • Problem resolution, including ownership through resolution., • Excellent critical thinking and problem-solving skills., • Excellent verbal and written communication skills., • Excellent customer service skills., • Strong attention to details., • Ability to work independently and as part of a team. Network Engineer Requirements: • Patient and professional demeanor, with a can-do attitude., • At least one industry-recognized certification related to networking (Microsoft, Cisco, CompTIA, etc.)., • Participate in the On-call holiday and weekend rotation and after-hours support., • Five years of technical experience Educational/Vocational/Previous Experience Recommendations: • BA/BS preferred but not required, preferably in computer science or a related field., • Must have some current certification, • 5+ years of IT experience. Benefits: · Competitive salary based on experience and qualifications. · Health, vision, and dental benefits offered. · Full on-the-job training & support. · Fun working environment and culture. · Personal growth Company DescriptionWe provide managed IT products, solutions and services to small and medium businesses looking to take full advantage of today's technology and security. We are a Managed Service Provider with networks based primarily on the Microsoft Windows Platform.We provide managed IT products, solutions and services to small and medium businesses looking to take full advantage of today's technology and security. We are a Managed Service Provider with networks based primarily on the Microsoft Windows Platform.

Job Description Overview Half the world still lacks access to essential health services, and even in the most advanced systems, outcomes remain uneven while clinicians face mounting pressure. Every inefficiency and preventable error represents a chance to do better: to save lives, restore time to clinicians, and rebuild trust in healthcare. Medical knowledge is doubling every few months, but the supply of expertise cannot keep pace. At Corti, we believe the only scalable way to solve this is to expand access to medical expertise through specialized AI infrastructure. By embedding our platform into the applications and workflows that clinicians and patients rely on, we help eliminate unnecessary administration, prevent diagnostic mistakes, and make healthcare more affordable, accessible, and ultimately more human again. There is no quality healthcare without a quality dialogue and now, no reliable AI without a robust platform. We need you to help us build both. Why Corti? Corti is becoming the premier infrastructure company for healthcare AI. Unlike general purpose players on the market, our models are trained on real-world healthcare data and delivered through modular, accurate and compliant APIs that developers, innovators, and product teams access easily - and most importantly, trust. We focus on the foundation - serving the builders who are reshaping healthcare. From startups rethinking patient flows to enterprises modernizing legacy systems, Corti provides the safe, reliable intelligence they need to innovate at scale. We thrive on the toughest challenges, from making clinical reasoning more reliable to designing infrastructure that meets the highest global standards for safety and trust. If you’re excited by developer-first design, clinical-grade reliability, and shaping the foundation of healthcare’s future - then Corti is the place for you. The Role We’re already expanding our brand-new Activation Team to transform technical potential into clinical impact—faster. Our mission: accelerate technical activation, remove friction, and spark long-term engagement. As a Developer Relations Engineer, you’ll sit at the crossroads of product, engineering, and customer success. You’ll be the catalyst that transforms new signups into thriving, long-term users of our healthcare API infrastructure. Think of yourself as the bridge between first impressions and enduring value—making sure every customer, whether technical or non-technical, gets started with confidence, efficiency, and impact. This role is at the heart of Corti’s customer journey: you’ll build trust, grow utilization, and uncover opportunities that shape the future of healthcare AI. What you’ll be doing * Drive technical onboarding: Own the customer journey from day one, ensuring seamless integration of our API platform and unlocking maximum value for both named accounts as well as users that sign up through our Product Led Growth funnel. * Be the trusted technical partner: Act as the primary point of contact, proactively troubleshoot issues, and collaborate with internal teams to resolve complex API challenges. * Keep the system healthy: Monitor day-to-day activity in our ticketing system, spotting issues before they become blockers. * Strengthen relationships: Drive customer and partner success through discovery calls, strategic support, and technical growth planning * Build knowledge at scale: Create and maintain documentation, guides, and resources that empower customers to solve problems independently. * Drive product adoption: Promote healthy usage and identify opportunities where customers could benefit from expanded services or solutions. * Fuel go-to-market success: Partner with GTM teams to strengthen technical relationships, set realistic expectations, and foster excitement. * Collaborate cross-functionally: Work daily with Product, Engineering, and GTM teams to ensure customer needs translate into product evolution. What you bring * Experience that counts: 3+ years in technical customer success, support, or similar roles—ideally in API or SaaS environments. * Language skills: Fluency in English and another language would be beneficial (e.g. German, French, Spanish etc.) * Technical fluency: Skilled at troubleshooting, with proficiency in at least one programming language (e.g. Python, JavaScript) and a strong understanding of RESTful APIs. * Clear communicator: Able to break down complex technical concepts for both engineers and non-technical stakeholders. * Curious problem-solver: Eager to tackle challenges, remove roadblocks, and learn continuously. * Adaptability: Thrives in ambiguity, comfortable in fast-paced, evolving environments. * Bonus points: A passion for AI, customer experience, and healthcare innovation. Life at Corti * You will be reporting to VP of Customer Experience * The position is full-time and starts as soon as possible. * Offices in New York, Copenhagen and London * Equipment provided by Corti * Hybrid working Ready to dive into the world of Corti? Hit that 'Apply' button, and let's start working together on reshaping the dialogue in healthcare, making a real difference for millions of patient outcomes around the world. 🤝 Bringing in top talent from all backgrounds is crucial in our pursuit to improve the world of healthcare. We encourage applications from all people and do not discriminate based on race, religion, national origin, gender, sexual orientation, age, and/or disability status. At Corti, experience comes in many forms, and we’re passionate about creating teams with a multitude of perspectives! If you believe your experience is close to what we’re looking for but not an exact match, we still hope you’ll consider applying!

Job Description TITLE: Senior Intune Mobility EngineerLOCATION: Hybrid - New York or ChicagoDURATION: 6 monthsPosition SummaryCompany X is seeking a highly motivated Senior Intune Mobility Engineer to join the Desktop Engineering Team. The candidate will be responsible for the 3rd party application lifecycle, automating workflows, documentation, enterprise workstation management, project management and level 3 support.This person will be required to use exceptional communication skills to interact with geographically distributed teams of varying knowledge levels, while collaborating on incidents and projects. This position can be in Chicago or NY.Essential Job FunctionsThe Senior Intune Mobility Engineer’s primary responsibilities include: • Lead the design, implementation, and management of Microsoft Endpoint management/Intune solutions., • Lead architecture and design sessions for Mobile applications, planning for both business and technical requirements and assist with product roadmap development., • Implement system security requirements defined under Information Security standards., • Work on projects that include multi-tier application review, onboarding, and maintenance., • Develop and execute test plans to check infrastructure and system performance., • Maintain SME level knowledge on various mobile and desktop products., • Work with application vendors regarding application compatibility for upgrades and migration projects, including being a liaison between vendors and IT staff., • Schedule upgrades and migrations with users, maintain change management data, complete the upgrades in deployment system, facilitate and track feedback from the users - post-rollout., • Create end user documentation and training material for IT Staff., • Incident & service management; logging of requests, support calls and escalating where appropriate into the Service Management tool., • Share a rotation / on-call nights and weekend support.Preferred Qualifications, • Expert level troubleshooting skills, able to quickly identify client issues, and be able to conduct in-depth diagnostics on Microsoft Intune products and services., • Experience with troubleshooting and configuring device connectivity., • Strong understanding of generally accepted system administration methodologies, tools, and techniques, and desire to instill these practices in both individual and teammates’ work., • Knowledge in MAM (Mobile Application Management), Apple Business Manager (ABM), VPP / DEP, and Android Zero Touch., • Active Directory concepts such as Kerberos, LDAP, Certificates and Security Groups., • Understanding of networking, firewalls, and common datacenter infrastructure., • Understanding of Industry best practices for mobile security and separation of corporate and personal priorities., • Good written documentation skills and demonstrable experience of documenting systems and procedures., • Passion for providing outstanding support for inbound incident tickets, as well as foresight to assess risk and scale., • Ability to maintain skillset up to date as the product evolves continually., • Excellent interpersonal and communication skills, including an ability to interact with users of varying technical skill levels., • Strong project management skill with some experience leading projects., • Ability to work independently and without the need for supervision, as well as collaboratively within the team and across various IT groups and business units., • Knowledge of Cloud Identity (Azure Active Directory, AAD Sync, Role-based access control)., • Knowledge of BlackBerry UEM., • Knowledge of Certificate and Certificate Chain Authority., • Knowledge of SQL queries and ability to create ad-hoc custom reports., • Experience in Financial sector preferred.Basic Qualifications, • Bachelor’s degree in Computer Science or Management Information Systems., • Minimum of 5 years of experience working in a large implementation of 1000 or more mobile devices., • Minimum of 2 years with Microsoft Intune mobile device management., • Minimum of 3 years of technical experience supporting an industry-leading MDM solution (Intune, AirWatch, Blackberry, MobileIron).

Job Description Job title: C++/Rust Engineer - Trading About Keyrock Since our beginnings in 2017, we've grown to be a leading change-maker in the digital asset space, renowned for our partnerships and innovation. Today, we rock with over 180 team members around the world. Our diverse team hails from 42 nationalities, with backgrounds ranging from DeFi natives to PhDs. Predominantly remote, we have hubs in London, Brussels, Singapore and Paris, and host regular online and offline hangouts to keep the crew tight. We are trading on more than 80 exchanges, and working with a wide array of asset issuers. As a well-established market maker, our distinctive expertise led us to expand rapidly. Today, our services span market making, options trading, high-frequency trading, OTC, and DeFi trading desks. But we’re more than a service provider. We’re an initiator. We're pioneers in adopting the Rust Development language for our algorithmic trading, and champions of its use in the industry. We support the growth of Web3 startups through our Accelerator Program. We upgrade ecosystems by injecting liquidity into promising DeFi, RWA, and NFT protocols. And we push the industry's progress with our research and governance initiatives. At Keyrock, we're not just envisioning the future of digital assets. We're actively building it. Mission statement We are seeking a Rust or C++ Engineer with trading experience to join our core Market Making Services team. Our technology stack is built on Rust, Node.js, and Python, and while Rust proficiency is preferred, we welcome strong C++/C engineers who are eager to learn and master Rust. As part of the core Market Making Services engineering team, you will drive continuous improvement in trading infrastructure and system performance. You will join a highly-profitable, fast-paced business unit within Keyrock, where you will be able to make a big impact on the bottom line while collaborating in a global fully remote team. This role is open to candidates located in European or US time zones. Job description * Develop and optimise low-latency options trading systems * Collaborate with quants, traders, and engineers to enhance trading strategies * Maintain and improve trading infrastructure, ensuring high performance and stability * Design and implement efficient, scalable, and resilient trading solutions * Troubleshoot and enhance exchange connectivity and execution speed * Support functional and component testing for critical trading components Background and experience Technical Skills & Experience * Strong experience in Rust and/or C++ (C background also considered) * Prior experience in a trading environment (HFT, Market Making, Prop Trading, or similar) * Eagerness to become an expert in Rust (if not already) * Experience with protobuf-based protocols or similar. * Exchange connectivity experience (strongly preferred) * Experience in High-Frequency Options Trading and low-latency systems (nice to have) Soft Skills & Competencies * Ownership & Reliability – Take full responsibility for your work. Write high-quality, maintainable code, meet deadlines, and follow through on commitments. Anticipate and proactively address potential issues before they arise. * Initiative & Problem-Solving – Approach challenges with a problem-solving entrepreneurial mindset. Make sound, independent judgments and take the initiative to drive solutions rather than waiting for instructions. * Operational Diligence – Respond strategically to technical and operational challenges, ensuring robust and reliable trading infrastructure while instilling confidence in the team’s processes. * Curiosity & Growth Mindset – Continuously seek to improve your technical skills and knowledge. Stay ahead of industry trends and take the initiative to practice and explore new technologies that excite you. * Excellent Communication Skills with a team player mindset, collaborating within a fully remote global team. Our recruitment philosophy We value self-awareness and powerful communication skills in our recruitment process. We seek fiercely passionate people who understand themselves and their career goals. We're after those with the right skills and a conscious choice to join our field. The perfect fit? A crypto enthusiast who’s driven, collaborative, acts with ownership and delivers solid, scalable outcomes. Our offer * A competitive salary package * Autonomy in your time management thanks to flexible working hours and the opportunity to work remotely * The freedom to create your own entrepreneurial experience by being part of a team of people in search of excellence As an employer we are committed to building a positive and collaborative work environment. We welcome employees of all backgrounds, and hire, reward and promote entirely based on merit and performance. Due to the nature of our business and external requirements, we perform background checks on all potential employees, passing which is a prerequisite to join Keyrock.

Job Description Company Overview: Vanderweil Engineers is a top-ranked national engineering firm specializing in MEP/FP, Power, and technology systems for a wide range of market sectors. In our 75th year in operation with a staff of 500+ located across nine offices, we are proud to be one of the leading independently owned engineering firms in the country. Our Power Group provides full-service engineering and design solutions for utility, institutional, and commercial clients across the U.S., with a strong focus on reliability, sustainability, and innovation. As part of our continued growth in the Transmission & Distribution sector, we are seeking a skilled and motivated Substation Electrical Engineer with 5+ years of experience to join our multidisciplinary team. This is an opportunity to support the development of critical infrastructure and gain deep technical experience while growing your career alongside an experienced and supportive team. Position Summary: The Substation Electrical Engineer is responsible for executing electrical design and analysis for high-voltage substation projects (up to 345kV) under the mentorship of senior engineering staff. You will engage in all phases of design - from conceptual engineering through construction support - developing technical expertise and contributing to safe, reliable, and code-compliant solutions for utility and industrial clients. If you are looking for meaningful project experience, team-oriented culture, and a path toward professional licensure and technical leadership, we would love to hear from you. Some of your responsibilities include: • Support the electrical design of HV substations through schematic design, design development, and construction documents., • Develop substation layouts, grounding, protection one-lines, and panel schedules using AutoCAD, Inventor and Revit., • Assist with modeling electrical systems and one-line diagrams in CYMCAP, AGI32, SKM or ETAP, performing thermal analysis, basic short circuit, arc flash, and coordination studies., • Prepare design calculations, including voltage drop, grounding, load flow, lighting power density, and illumination levels., • Apply knowledge of NEC, NESC, IBC, ANSI/IEEE, IEC, and client standards in all aspects of design., • Participate in site visits and field investigations to support design development and construction., • Review submittals and respond to RFIs during construction administration., • Collaborate with multi-discipline teams on large-scale substation, mission critical, and utility projects., • Work under the guidance of senior engineers and contribute to mentorship and knowledge-sharing within the team. Essential Skills and Requirements: • Bachelor’s Degree in Electrical Engineering or Technology., • Engineer-in-Training (EIT) certification considered first; willingness to pursue a PE license strongly preferred., • Minimum 5 years of experience in substation, power, or related electrical design roles., • Experience with AutoCAD and Revit for substation design and modeling; familiarity with AutoCAD-3D, Inventor, MicroStation or Bentley is a plus., • Working knowledge of SKM PowerTools, ETAP, or similar system modeling software., • Exposure to AGi32, CYMCAP, and AMPCALC 4 is beneficial., • Solid understanding of ANSI/IEEE, NEC, and NESC code requirements., • Strong verbal and written communication skills., • Familiarity with construction documentation, administration processes, and material selection., • Ability to manage time effectively and contribute to multiple active projects. Our Work Culture: We know that work/life integration is important to our employees. Our hybrid work style (up to 2 days remote per week) allows team members to have flexibility while building their skills through in-person exposure to industry experts. Our wellness programs prioritize our team members’ physical and behavioral health. We are an equal opportunity employer committed to diversity in the workplace. The compensation that we expect to pay for this position is commensurate with experience, education, licensure, skills and location but may range between $80,000 and $120,000. Please connect with us for more details.

About NYC Health + Hospitals NYC Health + Hospitals is the largest public health care system in the United States. We provide essential outpatient, inpatient and home-based services to more than one million New Yorkers every year across the city’s five boroughs. Our large health system consists of ambulatory centers, acute care centers, post-acute care/long-term care, rehabilitation programs, Home Care, and Correctional Health Services. Our diverse workforce is uniquely focused on empowering New Yorkers. At NYC Health + Hospitals, our mission is to deliver high quality care health services, without exception. Every employee takes a person-centered approach that exemplifies the ICARE values (Integrity, Compassion, Accountability, Respect, and Excellence) through empathic communication and partnerships between all persons. Work Shifts 8:00 A.M – 4:00 P.M Duties & Responsibilities Purpose of Position Under general supervision of the Director, Engineering and Support Services, assists in planning, directing, coordinating and evaluating capital programs of the Corporation, including General Construction, Telecommunications, Energy Conservation and other Engineering Support Programs. In collaboration with the Director, formulates and evaluates programs and projects of the office and supervises the functional programming activities of discrete units directed toward accomplishing the division’s objectives. Examples of Typical Tasks • Plans and develops engineering projects concerned with problems which have a major impact on the operation and function of a designated unit., • Directs, coordinates and maintains control over project assignments and related activities., • Prepares reports, develops and prepares engineering management audits, studies, surveys for Director of Engineering and Support Services and/or other Corporate officers detailing proposed new programs, statistical studies, leasing property, health facilities planning with recommendations and other data as required. Monitors progress and implementation of approved recommendations., • Maintains liaison with Federal, State and City agencies pertaining to engineering design, construction and other related areas., • Plans and implements programs to establish performance standards to attain increased productivity and accountability., • Supervises project activities through the assignment of qualified key personnel by establishing and maintaining project budget, equipment, material supplies and necessary services and by obtaining and furnishing personnel with basic job information., • Attends staff meetings, reviews capital and expense budget submissions and provides recommendations regarding proposed projects and programs., • Participates in collecting and providing management information to record and report status of projects, assignment and cost by Capital Budget Control and other departments., • May provide consultation services to Executive Directors pertaining to engineering, construction design projects and other engineering support programs and functions., • Coordinates efforts and cooperates with Departmental Managers and Directors on matters of mutual concern and extends functional guidance and assistance., • Participates in developing and preparing standard methods and procedures for implementation of maintenance operations, construction contracts, capital projects development and support service program activities. Provides technical assistance in review of existing maintenance and engineering procedures, service and construction contracts and preventative maintenance for all Corporate facilities. Minimum Qualifications • Qualification for Central Office. Qualification for Health Care Facilities. 1. A Baccalaureate Degree in Engineering or Architecture from an accredited college or university; or,, 2. New York State licensure as a Professional Engineer or Registered Architect; and,, 3. Five years of experience in Construction, Design, Engineering or related fields in a health care environment, including three* or two# years in a supervisory capacity; or,, 4. A satisfactory equivalent combination of education, training and experience. Department Preferences • Bachelor's degree in Architecture, Engineering, Industrial Engineering, Contruction Management or an approved related discipline from an accredited college or university Benefits NYC Health and Hospitals offers a competitive benefits package that includes: • Comprehensive Health Benefits for employees hired to work 20+ hrs. per week, • Retirement Savings and Pension Plans, • Paid Holidays and Vacation in accordance with employees' Collectively bargained contracts, • Loan Forgiveness Programs for eligible employees, • College tuition discounts and professional development opportunities, • College Savings Program, • Union Benefits for eligible titles, • Multiple employee discounts programs, • Commuter Benefits Programs

Job DescriptionFinal compensation will be based on a combination of:· Relevant work experience· Education· Project size · Project location· Required working hours· Candidate subject matter expertise and/or specialty · Ability to be approved by agencies/owners as required· Come bridge the gap between you and your career goals! Recently ranked as a best U.S. construction workplace by Fortune Magazine, MLJ Contracting is driven by passion and built on trust. When you work at MLJ, you work for a company that values your well-being, your talent, and your career aspirations. If you are looking for a fulfilling career, come join our family and turn big ideas into even bigger realities. As a premier general contractor in the heavy construction market, MLJ Contracting successfully performs major public works projects for client agencies across the New York city area. Proud of our quality workmanship and engaging projects, we always maintain the highest standards of safety and professionalism. Want to build a career that stands the test of time? Join MLJ and lay the foundation for a better future. The Quality Manager is responsible for all quality-related functions on projects to which they are assigned. II. EDUCATION/CERTIFICATIONS • BS in engineering or related field or equivalent years' experience in the industry., • Certified Quality Engineer(CQE) as recognized by the American Society for Quality (ASQ)., • Certified ISO-9000 Lead Auditor, as recognized by the ANSI-ASQ National Accreditation Board (ANAB)., • Review submittals (catalog cuts, shop drawings, as-built drawings etc.) to ensure that they meet contract requirements., • Prepare reports to document compliance with quality requirements or issue non-conformance reports as necessary., • Identify and report quality problems or trends in the assigned area or program., • Recommend corrective action to quality problems., • Aid or lead project-wide system audits and surveillance, including supplier or subcontractor audits or surveillance to approved checklists and procedures., • Support quality assurance for a project to ensure it is designed, procured, and installed to meet customer and division quality requirements., • Write quality plans, procedures, audit checklists, and plans., • Implement training sessions to reduce turnover., • Conduct inspections of work as required- material tests, form work, reinforcement, structural steel, etc., • Maintain testing equipment calibration records and update per the requirements., • Schedule special inspections as required., • The Quality Manager is responsible for developing and implementing the Quality Plan and for the management and oversight of all quality issues., • A minimum of 10 years' total experience with the past five (5) years being Quality related., • Prior Experience in Quality related functions on MTA Heavy Civil Projects. #ZR Salary Range:$130,000—$180,000 USD

Job Description We are seeking a high performing electrical design engineer with leadership aspirations to add to our growing New York office. This role offers the opportunity to manage a variety of projects locally and globally from concept through completion while contributing to the strategic growth of our employee owned firm. You’ll provide technical expertise to project teams, mentor junior staff, and collaborate with firm leadership to deliver high-quality engineering solutions and help drive business development. Job Summary • Design lead for the electrical, lighting, and fire alarm systems, including preparation of all engineering calculations, equipment selection, and layout throughout life of the project, • Write scope of work for electrical design based on preliminary review and meetings with the client, • Prepare drawings and perform system design calculations and reports, • Select equipment for use in building systems, • Analyze operation of existing systems, • Demonstrate creativity, foresight and mature engineering judgment in anticipating and solving problems, • Coordinate all aspects of project document completion within company and externally with clients and other design professionals, • Serve as Project Manager and Technical Lead, • Prepare or review construction budgets based on experience and scope of project, • Supervise staff on multiple projects, provide assertive management, technical leadership and support to team members, verify that all work is completed as planned and scheduled in compliance with client, and company quality assurance practices, • Mentor younger staffQualifications, • Bachelor’s degree from accredited university in electrical engineering or equivalent, • Minimum of 10 years of relevant industry design experience with direct project experience inclusive of spaces such as data centers and / or life science facilities, • Proficiency in the latest version of AutoCAD, Revit, design, and calculation software, • PE preferred, • Strong technical knowledge, • Ability to interface with clients, • Ability to work on several concurrent projects, • Excellent communication skills, • Expert knowledge of design and building codes 7YPxMHLe4Y

Job DescriptionRadical AI, Inc. is an artificial intelligence company that is accelerating scientific research & development. We are at the forefront of innovation in the field of materials R&D, a critical driver for advancing our most cutting-edge industries and shaping the future. Breaking away from the traditionally slow and costly R&D process, Radical AI leverages artificial intelligence and machine learning to pioneer generative materials science. This innovative field blends AI, engineering, and materials science, revolutionizing how materials are created and discovered. Radical AI's approach speeds up R&D and addresses global challenges, setting new benchmarks in technology and sustainability. As a Mechatronics Engineer at Radical AI you will serve as the bridge between Mechanical Engineering and Software to operationalize a suite of novel robotic and autonomous systems to drive a first of its kind material science research and discovery laboratory. You will help ideate scalable designs for driving and automating state of the art lab equipment in part by specifying motors, motor drivers, actuators, encoders, sensors, and control systems. You will drive the integration of electromechanical systems and the foundational power and control systems, equipment, and hardware to operate our equipment safely and reliably. Your experience and vision will shape both the physical and systematic implementation of a lab-wide autonomous integrated control scheme. You will collaborate closely with Mechanical Engineering and Software to meet rigorous and sometimes dynamic design requirements at a profound deployment speed. You will maintain and optimize control system performance to meet throughput and reliability metrics that are critical to the success of the technology. Mission • Contribute to and actualize the vision of the Mechanical Engineering team as we tackle solving complex and interconnected material handling challenges, and innovate novel solutions to automating the operation of existing equipment and systems., • Leverage your industry experience to instill team-wide adoption and utilization of ‘right tool for the job’ off-shelf solutions to accelerate the deployment of control, power, safety, and sensing systems., • Execute on the design and implementation of precision motion control systems and associated sensors and encoders., • Design and assemble the power and control cabinets to drive our systems with a focus on design flexibility and industry standard best practices for safety systems to protect our people and our technology., • Swiftly debug and trouble shoot electromechanical systems to maximize facility and equipment uptime. Help shape the culture of the hardware team by leading from the front and demonstrating a disciplined sense of organization, eye for detail, and an impeccable level of polish and craftsmanship., • Bring an attitude of collaboration and openmindedness, to facilitate fearless and creative problem solving that empowers our team to ship world class technology at an unprecedented speed.About you, • Minimum B.S. in Electrical, Mechanical, or Mechatronics Engineering or a closely related field., • 3-5 years industry experience in robotics, industrial automation, or a closely related field., • A strong fundamental understanding of electrical engineering and industry best practices., • Competency with CAD software, we use SOLIDWORKS., • Experience with PLCs, motor drivers, and industrial automation., • Knowledge of control systems, embedded systems, and automation technologies., • Excellent communication and interpersonal skills.Pluses, • Familiarity with programming languages like Python., • Familiarity with 6 DOF arms cobots, and their implementation., • Hands on experience with rapid prototyping and machine fabrication techniques., • Experience or exposure to the design and utilization of material handling systems (AMRs, ASRS, conveyance systems, etc)What we offer, • A competitive compensation package also includes the best in benefits:, • Medical, dental, and vision insurance for you and your family, • Mental health and wellness support, • Unlimited PTO and 14+ company holidays per year, • 401K, • Work closely with a team on the cutting edge of AI research., • A mission: an opportunity to fundamentally change the way humanity makes progress through materials science discovery.+ Equity + Benefits; base pay offered may vary depending on job-related knowledge, skills, and experience.Radical AI is committed to equal employment opportunity regardless of race, color, ancestry, national origin, religion, sex, age, sexual orientation, gender identity and expression, marital status, disability, or veteran status.

Job Description Are you ready to unleash your creativity and technical skills? Northern Wolves Inc is searching for a talented HVAC Engineer, Drafter to join our dynamic team! As an HVAC Engineer, Drafter, you will play a crucial role in transforming innovative design concepts into practical, functional HVAC systems that enhance comfort and efficiency. You will collaborate with engineers, architects, and project managers to create detailed drawings and specifications for HVAC installations. Your knack for precision and attention to detail will be essential as you draft plans and ensure they align with our commitment to quality and sustainability. If you’re passionate about drafting and designing cutting-edge HVAC solutions and want to contribute to exciting projects that make a difference in our communities, we would love to have you on board! Responsibilities • Create detailed HVAC drawings using CAD software based on project specifications and designs., • Collaborate with engineers and project teams to understand design requirements and implement feedback., • Produce calculations for load requirements and system performance., • Review and modify designs to comply with industry standards and regulations., • Assist in the preparation of project documentation, including technical specifications and reports., • Participate in project meetings and communicate effectively with team members and clients., • Associate’s or Bachelor’s degree in Mechanical Engineering, Architectural Drafting, or a related field., • Minimum of 2 years of experience in HVAC drafting or engineering., • Proficient in CAD software (AutoCAD, Revit, etc.) and other drafting tools., • Strong understanding of HVAC systems, load calculations, and industry standards., • Excellent attention to detail and problem-solving skills., • Effective communication skills and a collaborative mindset., • Paid Time Off (Vacation, Sick & Public Holidays), • Family Leave (Maternity, Paternity), • Training & Development, • Work From Home, • Free Food & Snacks

Job Description Cresilon® is a Brooklyn-based biotechnology company that develops, manufactures, and markets hemostatic medical devices utilizing the company’s proprietary hydrogel technology. The company’s plant-based technology has revolutionized the current standard by stopping traumatic and surgical bleeds in seconds without the need for extended manual pressure. The company's current and future product lines target veterinary, human trauma, and human surgical applications. Cresilon's mission is to save lives. Learn more about the company at . Description: The Medical Device Engineer is responsible for leading the design and development activities of new products and improving existing products in compliance with all quality and regulatory requirements. S/he will be responsible for authoring technical documents for the development of medical devices and combination products according to relevant Design Control regulations and standards. The person in this position will also be responsible for providing project-specific support, including technical analysis and review of supplier documentation as required. The position has a scientific focus that includes formulation development, product performance characterization, and implementation including proto-type design and fabrication and data generation through designed experiments. The Medical Device Engineer is expected to aspire for excellence with a bias toward action, willing to roll up their sleeves, get hands-on, and do what’s necessary to move projects forward in a fast-paced environment. They are committed to designing and developing products that dominate the marketplace and improve healthcare by partnering with our customers to drive purposeful innovation, resulting in best-in-class products. The Medical Device Engineer will work with a multidisciplinary team of researchers. This is a multi-faceted job in a highly collaborative environment across multiple functions that will require flexibility as well as an ability to learn about and develop new technologies and explore new techniques in pursuit of product innovation and robustness. Role level is contingent on experience, but this is not an entry level role.. This is a full-time, on-site position, located in Brooklyn, New York. Responsibilities • Create and lead experimentation for exploratory and/or product development research focusing on polymeric materials devices and their use., • Define new product functional requirements (design inputs/user needs) and evaluate the design's overall effectiveness, cost, reliability, and safety., • Lead cross-functional teams to develop new products, address design issues, and maintain existing designs., • Apply strong problem-solving skills to find solutions to complex problems., • Work independently to plan and schedule own activities necessary to meet project timelines., • Work cooperatively with, quality, manufacturing, regulatory, clinical, and marketing to ensure project success., • Lead the creation of design history file documentation through the new product development process., • Develop new implant and instrument designs utilizing Solidworks and modeling/detail design specifications., • Generate technical protocols/reports to support device safety and efficacy., • Invent/create concepts and designs and submit invention disclosures., • Ensure that all design activities adhere to FDA Quality System Regulations and ISO 13485 design control and risk management requirements. Lead material/design/process changes through a design control process, with well-documented research/analyses., • Author protocols and reports including development studies and design verification/validation activities., • Develop and execute test methods to aid in exploratory research, product development, and quality control; conduct chemical and mechanical property evaluation tests to assess the desirability of process or formulation changes., • Exercise technical judgment in the design, execution, and interpretation of experiments within the scope of project responsibilities and ensure the use of professional concepts to solve complex problems in creative and effective ways, in conformance with scientific methods and procedures., • Prepare samples as required for testing, or other evaluations and data analysis, including in voice-of-customer (VOC) labs., • Interface with customers, suppliers, and internal cross-functional team members to develop specifications and coordinate prototype fabrication., • Maintain a laboratory notebook and other technical documentation to required GLP/GMP guidelines., • Maintain active dialogue with Regulatory Affairs as subject matter expert on all product design elements/documentation pertaining to research towards FDA/regulated authority submissions,, • Provide support to marketing and sales team, support the introduction of new technologies with the development of presentations, sales tools, formulations, and applications data, • Communicate results to the scientific community via published papers. Present research at academic/industry symposia as an external representative of the company., • Manage part-time staff as a research leader and mentor for ongoing research projects., • Work with company leadership to evaluate existing research practices and contribute to a culture of ethical, high-quality research operations within the organization., • Provide other project or product support as needed in order to support Cresilon’s business objective. Required Qualifications • BS in Chemical Engineering, Polymer Engineering, Material Science, Biomedical Engineering, Mechanical Engineering, or related scientific discipline., • A minimum of 4+ years of product development experience is required., • A minimum of 2 years of hands-on experience in new product research and development in a cGMP-regulated industry is required (work experience in the Medical Device field is strongly preferred), • Adept experimentalist with hands-on experience in product development of medical devices and their safety/efficacy characterization in an R&D environment., • Experience gathering user needs, translating them to technical inputs, and developing viable V&V (Design Verification and Validation) plans., • Experience leading complex product development initiatives from concept through release., • Good working knowledge of anatomy and surgical procedures is required., • Demonstrated ability to solve difficult technical problems and deliver practical solutions that meet the application requirements is required. This includes strong analytical, problem-solving, and decision-making skills with the ability to be observant and to think creatively., • Demonstrated ability to design experiments and analyze data with appropriate quality and statistical methodologies., • Demonstrated ability to work independently as well as effectively be a strong team contributor and work cross-functionally to expedite the completion of critical project tasks, • Ability to handle multiple project assignments of medium scope and complexity and able to prioritize and complete work with a sense of urgency in a timely manner., • Ability to lead directly and by influence, including strong problem-solving, conflict resolution, and analytical skills., • Requires strong leadership skills, excellent written and verbal communication and presentation skills., • Working knowledge of FDA requirements as per 21 CFR 820, • Proficiency in the use of Microsoft Excel, Microsoft Word, and Microsoft PowerPoint is required., • Legal authorization to work in the United States is required. Preferred Qualifications • An advanced degree (MS or Ph.D.) is highly preferred., • Hands-on experience in product development with Class II and Class III medical devices., • Experience developing test methods and protocols/reports for safety and efficacy testing of implant and instrument designs., • Working knowledge of ISO 9001, ISO 13485:2003, and ISO 14971:2007., • Experience with IDE and PMA submissions., • Working knowledge of Good Documentation Practices (GDP), and Good Manufacturing Practices (cGMP), • Good understanding of statistical tools and validation/verification techniques., • Six-Sigma green belt or black belt certification Cresilon is an equal-opportunity employer that is committed to diversity and inclusion in the workplace. We prohibit discrimination and harassment of any kind based on race, color, sex, religion, sexual orientation, national origin, disability, genetic information, pregnancy, or any other protected characteristic as outlined by federal, state, or local laws. This policy applies to all employment practices within our organization, including hiring, recruiting, promotion, termination, layoff, recall, leave of absence, compensation, benefits, training, and apprenticeship. Cresilon makes hiring decisions based solely on qualifications, merit, and business needs at the time. Benefits • Competitive annual base salary range of $80,000 - $160,000, depending upon job level and qualifications, • Paid Vacation, Sick, & Holidays, • Monthly MetroCard Reimbursement, • 401(k) & Roth Retirement Savings Plan with company match up to 5%, • Work/Life Employee Assistance Program, • Company Paid Life and Short-Term Disability Coverage, • Medical, Dental, and Vision Insurance, FSA: Dependent & Healthcare, Commuter & Parking Benefits, Long Term Disability Coverage

Job DescriptionSalary: $110,000 - $140,000 New York Peace of Mind Technologies (POM), is currently searching for a qualified, enthusiastic, hard-working and driven Sales Engineer that embodies POM core values to join our Company. About You You are a technically minded, solutions-driven professional with a collaborative and customer-focused personality. You excel at translating complex technical requirements into clear, value-driven solutions, ensuring both accuracy and client satisfaction. You thrive in a team environment, naturally bridging the gap between technical design and sales strategy. Detail-oriented, innovative, and proactive, you stay ahead of industry trends and take ownership of delivering solutions that are not only technically sound but also commercially competitive and aligned with client needs. About Us Peace of Mind Technologies, LLC (POM) is New Yorks premier systems integrator for security and surveillance technology. Specializing in high-tech systems, cloud-based software services and audio/video solutions for thousands of businesses, schools and properties in the greater New York Metropolitan area, POMs diverse client roster comprises a wide range of prestigious and well-known organizations. Founded in 2002, POM has handled thousands of site installations, primarily focused on large offices, retail, hospitality, health care, education, and real estate (commercial, luxury residential and hi-rise). Position Overview The Sales Engineer supports the sales and estimating process by providing technical expertise, system design guidance, and solution development for commercial low-voltage projectsincluding Audio Visual (AV), Security (CCTV, Access Control, Intercom), and Telecom infrastructure systems. Working closely with the sales team, this role bridges client needs and engineered solutions to ensure proposals are accurate, competitive, and aligned with customer expectations. Sales Engineers partner with Sales to translate technical requirements into clear, value-driven solutions that meet both client goals and operational capabilities. The Sales Engineer ensures technical accuracy and feasibility, while Sales leads client relationships and deal strategy, together delivering proposals that reflect both technical excellence and commercial integrity. Key Responsibilities Pre-Sales Support • Participate in client meetings, site surveys, and needs assessments to identify technical and operational requirements., • Provide technical input and product recommendations to sales and estimating teams., • Support creation of proposals, RFP responses, and presentation materials., • Translate conceptual designs into accurate system schematics and scope descriptions., • Assist with Bill of Materials (BOM) creation and equipment selection., • Review drawings and submittals for technical accuracy and value engineering opportunities., • Conduct technical presentations and system demonstrations for clients, architects, and consultants., • Collaborate with sales leadership to develop standard system packages and solution templates., • Stay current on industry trends, product developments, and emerging technologies., • Work with Operations and Design to ensure seamless project handoffs and accurate documentation., • Partner with Procurement for long-lead items and product substitutions., • Collaborate with the Estimating to develop accurate and competitive proposals for security and audio-visual projects., • Prepare cost estimates, labor calculations, equipment selections, and project pricing in alignment with company margin targets and client expectations., • Support the development of RFP responses, bid submissions, and formal quotations, ensuring accuracy, completeness, and alignment with industry standards. Qualifications & Skills • Bachelors degree in Engineering, Technology, or a related field (or equivalent experience)., • 35 years of experience in system design, sales engineering, or technical sales within the AV, Security, or Telecom industry., • Strong knowledge of Division 27/28 standards, industry codes, and integration best practices., • Proficiency with design and estimating tools such as AutoCAD, Bluebeam, D-Tools, or similar platforms., • Excellent communication and presentation skills; able to explain technical concepts to non-technical audiences., • Detail-oriented with strong analytical, organizational, and problem-solving skills., • Ability to manage multiple priorities in a fast-paced, deadline-driven environment., • Manufacturer certifications (e.g., Crestron, Exacq, Avigilon, Axis, Biamp, or BICSI) a plus. Does this sound like you? Benefits Include: • Annual base salary $110,000 - $140,000, • Health benefits package, • Dental & Vision Insurance, • Company Sponsored Life Insurance Plan, • Voluntary Disability Plans, • 401k plan with matching, • Generous paid-time-off policy, • 5 Paid Sick Days, • Pre-tax commuter benefit We are an equal opportunity employer, and all qualified applicants will receive consideration for employment without regard to race, color, religion, age, sex, national origin, disability status, genetics, protected veteran status, sexual orientation, gender identity or expression, or any other characteristic protected by federal, state or local laws.

Job DescriptionSalary: $80,000 - $115,000 Annually New York Peace of Mind Technologies (POM), is currently searching for a qualified, enthusiastic, hard-working and driven Estimator that embodies POMs core values to join our Company. About You You are driven and understand how to manage priorities and coordinate effectively with team members to meet deadlines. You are comfortable with numbers, technically skilled and have the ability to stay focused and maintain great attention to detail while under pressure. About Us Peace of Mind Technologies, LLC (POM) is New Yorks premier systems integrator for security and surveillance technology. Specializing in high-tech systems, cloud-based software services and audio/video solutions for thousands of businesses, schools and properties in the greater New York Metropolitan area, POMs diverse client roster comprises a wide range of prestigious and well-known organizations. Founded in 2002, POM has handled more than 2,000 site installations, primarily focused on large offices, retail, hospitality, health care, education, and real estate (commercial, luxury residential and hi-rise). Roles & Responsibilities Realize Client Objectives. The Estimator reviews the prospects needs and wants for the product/services offered and works with the Senior Sales Engineer, System Engineers and the Sales team to develop the right solution. • Gathers relevant site details in order to create the scope of work including equipment and labor estimate., • Review and interpret project bid specifications., • Conduct site-walks with team. Support the Company Growth. The Estimator provides accurate and timely project estimates/quotes to the sales team that support the detailed scopes of work outlined in Sales Proposals, RFIs, RFPs etc. • Review & edit detailed scopes of work & product details in Sales Proposals, • Respond to requests for proposals (RFPs), • Create requests for information (RFIs), • Review product estimate and system design with sales department and other key internal resources. Increase Profit Margin. The Estimator levels vendor quotes and negotiates costs to increase profit margins, as well as identifies missing components in the scope of work to avoid additional project costs and reduced margins after the project is sold. • Documentingequipment needed and labor time required for each project, • Gather information to determine proper system components from internal and vendor resources, • Build vendor relationships and negotiate quotes. Exceed Client Expectations. The Estimator assists with the management of the quote calendar and prioritize accordingly to ensure that the sales team can meet RFP deadlines. Desired Skills and Experience • Disciplined work ethic, • Must know how to read construction drawings and do device take offs, • Excellent communication and writing skills, • Experienced and proficient with Microsoft Excel, Visio, and Outlook., • CAD and D-Tools experience a plus., • College Degree, • 2 5 years technical experience with electronic security, IT and/or low voltage systems., • Prior field based installation or project management experience is a plus. Does this sound like you? Benefits Include: • Annual salary commensurate with experience., • Health benefits package, • Voluntary dental, vision, disability and life insurance plans, • 401k plan with matching, • Company sponsored life insurance policy, • Pre-tax commuter benefit, • Generous paid-time-off policy Candidates must be authorized to work in the US. No agencies please. We are an equal opportunity employer, and all qualified applicants will receive consideration for employment without regard to race, color, religion, age, sex, national origin, disability status, genetics, protected veteran status, sexual orientation, gender identity or expression, or any other characteristic protected by federal, state or local laws.

Job Description Forhyre is seeking a talented individual that will be able to provide security architecture support and interface across the program as needed. This support includes, but is not limited to, cybersecurity solutions, providing technical strategy for solutions, guidance, policy, and implementations. The successful candidate for this position is a highly motivated individual, with a strong IT security background who excels integrating, operating, and deploying security technology and solutions and interacts well with both internal teams and clients. Note: U.S. citizens and those authorized to work in the U.S. are encouraged to apply. We are unable to sponsor at this time. Responsibilities: • Engineer, implement and monitor security measures for the protection of computer systems, networks and information, • Develop and implement security policies and controls to support the Cyber Security framework, • Manage the existing cyber security training program across global, multilingual business, • Assists in ensuring global Information security program meets all industry regulations, standards, and compliance requirements, • Drive adoption of infrastructure security best practices and work with Information Technology teams to ensure security standards are maintained, • Implement technology to proactively scan Information Technology environment for security breaches and suspicious activity, • Continuous improvement in the areas of Information Security technologies, techniques and processes, • Develops and maintains an effective system for the distribution of regular key performance indicator reports and dashboard, • Ability to interpret penetration test results and describe issues and fixes to non-security expert, • Responsible for leading an accurate & comprehensive status reporting to the executive steering committee, • Create and implement SOP/ process improvement initiatives to achieve outcomes that align or exceed the expectations of strategic roadmap Skills & Experience • 8+ years hands-on experience designing or implementing security solutions, including all related documentation and artifacts, • Analytical ability, problem-solving skills, and ability to break down complex problems into actionable steps, • Extensive experience in design and development of enterprise security architectures. Experience must include a wide range of work in creating diagrams and documentation with all components that comprise IT systems including network topology., • Strong knowledge and experience in secure enterprise architecture design, especially with regard to IAM, NDR, EDR, SIEM, AI/ML, and other cybersecurity tools and resultant applications, • Experience selecting effective methods, techniques, and evaluation criteria to achieve desired outcomes, • Previous experience developing architectures, strategies, strategic plans, roadmaps, and technical standards for the federal IT enterprise environment., • Vulnerability Assessment testing and/or Penetration Testing (preferred), • Robotic Process Automation/Intelligent Automation (preferred), • Business case development supporting security technology solutions (preferred), • Additional certifications demonstrating cybersecurity/technical mastery (preferred)

Job Description Electrical Power Studies Engineer - New York, NY / remote also available Our client is a Engineering Design Company that is a leader in the data center space. They provide design, consulting and management expertise in Data Center / Mission Critical Facilities Space with the mindset to provide reliability, energy efficiency, sustainable design when providing these consulting services for Enterprise, Colocation, and Hyperscale Data Center Projects. This career-growth minded opportunity offers exciting projects with leading-edge technology and innovation as well as competitive salaries and benefits. This challenging and unique role will have the opportunity to partner with all levels of engineering and design staff to develop power studies for projects once design has been completed. Design projects are primarily focused around critical power systems for new data centers and expansions to existing data centers in the hyperscale / colocation markets. They will have experience and in-depth knowledge of Electrical Power Distribution System design and installation. This person will work as part of the Engineering Team and interact closely with organizational leadership to complete Power Systems Studies. Working and communicating with internal team and clients effectively while following company's guidelines with company's goals, objectives and values in mind. Responsibilities: • Autonomous in day-to-day work with being given high level instruction on projects or assignments, • Execute and lead design teams and designs of complex scope, and coordinate activities of other personnel as needed, • Mentor engineers and assist with training and development to create a learning and growing environment, • Lead Power Systems Studies focused in the mission critical data center industry, • Independently perform Power System Studies for mission critical data center projects, • Evaluate Equipment: Assess equipment capabilities, ratings, and conditions (transformers, circuit breakers, capacitors, etc.); Determine if Equipment meets system requirements, • Lead efforts: proposal development, training / mentoring, and development of standards / automations to improve deliverables, • Conduct Power Systems Studies and produce reports along with final deliverables including breaker settings tables, TCC's, and arc flash labels, • Load Flow Studies: Analyze current and future system load to ensure power delivery without overloading components, • Short Circuit Analysis: Evaluate potential fault conditions to determine the system's response and ensure that equipment ratings are not exceeded, • Protection Coordination: Study the settings of protective devices such as relays, circuit breakers, and fuses to ensure they coordinate correctly and provide optimal protection, • Arc Flash Analysis: Conduct studies to determine potential arc flash hazards, calculate incident energy, and recommend safety practices and protective equipment, • Transient Stability Analysis: Evaluate the power system's ability to maintain synchronism after large disturbances, such as faults or sudden changes in load, motor starting, etc., • Develop proposals including project scope, schedule and budget, • Effective time management of project design team including forecasting resources and resource coordination, • Identify potential project scope changes; aid in development of strategies to minimize impact and changes from estimated costs and project deadlines, • QA/QC peer reviews for projects which candidate is not the engineer, • 5-10+ year's Electrical Engineering experience, • Bachelor's Degree in Electrical Engineering or similar engineering degree, • Licensed PE / EIT a Plus, • Possess advanced knowledge of electrical topologies associated with mission critical facilities, • Experience designing electrical power systems for complex data center/mission critical facilities, • Experience with Protective Devices: relays, circuit breakers, and fuses with knowledge of how they function, what versions and device settings, • Understand ratings, capabilities, and conditions of various power system equipment, • SME of industry and safety standards related to power systems, with emphasis related to arc flash hazards and other safety-related matters, • Understand effects and requirements of connecting new generation or loads to existing systems, • Power system simulation software with one of the following: ETAP, PSS/E, SKM, Easy Power, • MS Office Suite (Excel, Word, Outlook, PowerPoint, Teams), • Skilled at reviewing design drawings and equipment submittals, • Perform code analysis including selection of equipment, wiring, etc. to meet code requirements, • Conduct code analysis and possess advanced knowledge of electrical codes, • Analyze and prepare documents, reports and correspondence, • Client facing experience and at times serve as primary point of client contact on various projects, • Ability to successfully work independently; Self Starter and should prioritize well, • Effective communicator - both oral and written form (tech and non-tech), • Proactive, resourceful, and a multitasker, • Exceptional organizational skills with an attention to detail, • Skilled in completing assignments accurately and in a timely manner, • Previous experience in the Military / Military Veterans a huge plus! After applying, if you have further questions, you may call 973-895-5200 and ask for Iggy. You can also submit via our career portal and take a look at other Critical Facility openings we are working on at, If this job is not for you, feel free to forward this along. WE PAY FOR REFERRALS!! Company offers competitive salaries and benefits package including medical insurance, a 401(k) plan EOE/AA Employer M/F/D/V Pkaza LLC is a third-party employment firm. All fees assessed by Pkaza LLC will be paid by our employer that we represent and not by the candidate

Job Description About Voyant Voyant Photonics, based in the heart of New York City, is transforming machine perception with a new class of LiDAR devices that are compact enough to fit in the palm of your hand and powerful enough to measure range, velocity, and reflectivity with unparalleled accuracy. By leveraging cutting-edge silicon photonic chips smaller than your fingertip, we deliver sensors that are not only revolutionary in performance but also affordable enough to integrate into any system. Our technology disrupts the status quo of bulky, expensive, and power-hungry LiDAR systems, making high-precision sensing accessible for widespread adoption in robotics, autonomous vehicles, drones, industrial automation, and beyond. Position Overview We’re looking for a Photonic Layout Engineer to support the design and development of advanced photonic integrated circuits (PICs) for our FMCW LiDAR systems. In this role, you’ll translate schematic designs into manufacturable layouts, integrating complex passive and active photonic components alongside electrical and mechanical interfaces. You’ll work extensively with GDSII layouts and use Python scripting to automate and streamline layout and verification processes, including DRC and LVS. Experience with PIC layout is important, as you’ll contribute to high-density, high-performance photonic chips that push the limits of integration. You’ll start by working closely with two senior silicon photonics designers. As the team grows, you’ll collaborate with additional layout engineers, photonics designers, and modeling engineers. The role offers a clear growth path—from owning small test structures to eventually managing full tapeout submissions. Location: NYC preferred, with remote options available. If you're open to relocating, we’re happy to support you through the process. Responsibilities: * Own the layout of photonic integrated circuits (PICs) from concept through tapeout Create and maintain a library of parameterized photonic component cells (PCells) * Integrate photonic and electronic layouts (co-layout) for heterogeneous integration * Implement photonic design rules and ensure compliance with foundry-specific PDK constraints * Collaborate closely with the photonics design, systems, test, and packaging teams to deliver manufacturable, testable, and high-performance PIC designs * Implement waveguide routing, die- and reticle-level floorplanning, and integration with electronic and packaging interfaces * Develop and maintain layout automation scripts * Run and debug physical verification checks, including DRC, LVS, and optical connectivity (netlist-driven or netlist-free) * Help define and shape internal layout flows, documentation standards, and review processes * Work hands-on with foundry deliverables, including GDS generation and fab communication Qualifications * B.S. or M.S. in Electrical Engineering, Physics, Optical Engineering, or a related field * 2+ years of experience in photonic layout, preferably in silicon photonics or a similar platform * Proficiency with Python-based layout tools such as GDSFactory, IPKISS, and KLayout * Strong scripting skills in Python * Familiarity with photonic foundry PDKs, tapeout processes, and custom photonic components * Strong attention to detail, excellent documentation skills, and experience working in a cross-functional engineering environment Preferred Qualifications * Proficiency with Cadence Virtuoso and SKILL, with experience in analog and/or digital IC layout * Experience with co-packaged optics and heterogeneously integrated PICs * Understanding of wafer-scale testing and packaging constraints as they relate to layout * Familiarity with electrical layout and EDA integration for optoelectronic devices What We Offer * Competitive salary and meaningful equity package * Comprehensive health benefits (Medical, Dental, Vision) * Unlimited PTO and paid company holidays * Team events and company meetups * Hybrid or remote work environment with monthly travel for remote employees. * Complimentary lunch provided daily at our NYC office Equal Opportunity Employer Voyant Photonics is an equal opportunity employer committed to building a diverse and inclusive workplace. We welcome applicants from all backgrounds and do not discriminate based on race, color, religion, gender, gender identity or expression, sexual orientation, pregnancy, marital or partnership status, age, national origin, citizenship, veteran or military status, disability, medical condition, genetic information, caregiver status, or any other characteristic protected by law.

Job DescriptionAbout Us: Voyant Photonics, based in the heart of New York City, is transforming machine perception with a new class of LiDAR devices that are compact enough to fit in the palm of your hand and powerful enough to measure range, velocity, and reflectivity with unparalleled accuracy. By leveraging cutting-edge silicon photonic chips smaller than your fingertip, we deliver sensors that are not only revolutionary in performance but also affordable enough to integrate into any system. Our technology disrupts the status quo of bulky, expensive, and power-hungry LiDAR systems, making high-precision sensing accessible for widespread adoption in robotics, autonomous vehicles, drones, industrial automation, and beyond. With Voyant, the next generation of machines can see, understand, and navigate the world like never before. Discover how we’re redefining what’s possible by making real products out of cutting edge research in silicon photonics. Why Join us? At Voyant, you’ll help build some of the world’s most complex silicon photonics chips, reimagined for high-performance 3D sensing. Our chips are at the heart of our LiDAR systems, and your work has a direct impact on our core product and roadmap. As a Senior Silicon Photonics Engineer, you’ll play a key role in defining photonic architecture and developing new passive and active components. In your first year, you’ll own simulations, and design system PICs, working hands-on from concept through implementation. You’ll join a small, fast-growing team that collaborates tightly across photonics, systems, packaging, and electronics. The role offers both deep technical ownership and real growth potential — from leading component design to eventually overseeing full tapeout efforts across disciplines. If you're excited by cutting-edge technology and meaningful challenges, this is a rare opportunity to shape a core system in a company that’s bringing photonics innovation to market. Key Responsibilities: * Design and simulate photonic components and system-level functionality and performance * Design schematics, draw layout, as well as work with layout engineers to create photonic systems and component test structures. * Own and drive complex tapeouts to completion on time * Work closely with external manufacturing partners to inform component design, process integration, and performance monitoring. * Develop component and system-level optical testing plans and collaborate with the test team to develop optoelectronic testing setups, perform hands-on photonic component and optical system-level testing. * Work with the product team to transition/scale testing for performance evaluation. * Collaborate with cross-functional teams to integrate our photonic chips into the LIDAR system and evaluate their performance * Contribute to the expansion of our IP portfolio through patent filing Qualifications: * Ph.D. with research in silicon photonics with 2+ years’ experience * Proven track record leading one or more successful silicon photonics foundry tapeouts * Strong understanding of planar waveguide optics, both passive components such as waveguides, multiplexers/demultiplexers, tapers, couplers and active such as waveguide detectors, lasers and optical amplifiers * Strong understanding of photonic system-level design concerns * Strong understanding of photonic component-level design concerns * Experience in photonic fabrication * Good understanding of CMOS manufacturing process steps and constraints on the design of photonic devices * Proficient with mainstream photonic components and systems simulation packages such as Lumerical, Tidy3D and COMSOL * Proficient with complex optoelectronic lab testing techniques and equipment, necessary to validate designs, including high speed detectors, oscilloscopes, spectrum analyzers, precision positioning setups * Collaborative in a multi disciplinary startup environment, ability to work both with local and remote team members as well as with our manufacturing partners * Independent, analytical thinker, comfortable in a fast-paced dynamic frontier technology environment Benefits Package: * Competitive base salary and meaningful equity package. * Comprehensive health benefits (Medical, Dental, Vision). * Unlimited PTO and paid company holidays. * Team events and company meetups. * Complimentary lunch provided daily at our NYC office. Equal Opportunity Employer Voyant Photonics is an equal opportunity employer committed to building a diverse and inclusive workplace. We welcome applicants from all backgrounds and do not discriminate based on race, color, religion, gender, gender identity or expression, sexual orientation, pregnancy, marital or partnership status, age, national origin, citizenship, veteran or military status, disability, medical condition, genetic information, caregiver status, or any other characteristic protected by law.

Job Description Mitsubishi Electric Trane HVAC US LLC is looking for an Area Sales Manager I, Commercial in New York City. POSITION SUMMARY: Responsible for developing and nurturing relationships with the architectural, engineering and specifier community to educate about Mitsubishi Electric Trane HVAC (METUS) products and their applications, along with increase the number of specifications, and subsequent sales within an assigned territory. ESSENTIAL FUNCTIONS The essential functions of the position include, but are not limited to the following: • Perform direct and joint sales calls to develop relationships with local architects, engineers, and contractors—educating them on applying CITY MULTI Variable Refrigerant Flow systems and other Mitsubishi Electric Trane HVAC products., • Deliver educational presentations to architects, engineers, contractors, and commercial sales channels., • Occasional job site visits to support customers and service group members., • Participate in local professional networking groups, industry associations, and industry trade shows., • Enter and maintain customer information, activities, and quotations in SalesForce Customer Relationship Management System (CRM) or other systems as required., • Manage project pipeline ensuring that they are tracked within the SalesForce CRM system., • Willing to travel up to 40% to for various Company meetings and training both domestically and possibly internationally., • Bachelor’s Degree in Mechanical Engineering (preferred) or equivalent experience., • 2-5 years technical sales experience., • Familiarity with local HVAC commercial sales channels, engineers, and contractors preferred., • Ability to read and comprehend architect and engineer plans., • Proficient with PowerPoint/Excel/Word and other Microsoft Office products., • Proficient public speaking skills., • Familiarity with HVAC application and design is preferred., • Must reside in the Business Unit Geography., • Valid Driver’s License with acceptable driving record. If hired, employee will be in an “at-will position” and the Company reserves the right to modify base salary (as well as any other discretionary payment or compensation program) at any time, including for reasons related to individual performance, Company or individual department/team performance, and market factors. ABOUT MITSUBISHI ELECTRIC TRANE HVAC US Formed in 2018, Mitsubishi Electric Trane HVAC US (METUS) is a leading provider of ductless and VRF systems in the United States and Latin America. A 50 percent – 50 percent joint venture between Ingersoll Rand plc and Mitsubishi Electric US, Inc., the company provides innovative products, systems and solutions capable of cooling and heating any application from a home to a large commercial building. METUS is a leading marketer of Zoned Comfort Solutions® and Variable Refrigerant Flow (VRF) air-conditioning and heating technology. Systems sold by the joint venture include a wide variety of technologically advanced products designed to deliver superior efficiency, comfort and control. The family of brands supported by METUS includes: Mitsubishi Electric Cooling & Heating, Trane® / Mitsubishi Electric and American Standard® Heating & Air Conditioning Mitsubishi Electric. More information is available at . We offer an excellent compensation and benefits package including 401(K). In compliance with federal law, all persons hired will be required to verify identity and eligibility to work in the United States and to complete the required employment eligibility verification document form upon hire. We are an equal employment opportunity employer. All employment decisions are made without regard to race, color, religion, sex, pregnancy, breastfeeding or related medical condition, national origin, ancestry, citizenship, age, marital status, sexual orientation, gender identity, gender expression, domestic partnership, physical disability, mental disability, medical condition, genetic characteristic or information, military or veteran status or other legally protected status (except when one of these criteria is a legally permissible bona fide occupational qualification). The Company will not discharge or in any other manner discriminate against employees or applicants because they have inquired about, discussed, or disclosed their own pay or the pay of another employee or applicant. However, employees who have access to the compensation information of other employees or applicants as a part of their essential job functions cannot disclose the pay of other employees or applicants to individuals who do not otherwise have access to compensation information, unless the disclosure is (a) in response to a formal complaint or charge, (b) in furtherance of an investigation, proceeding, hearing, or action, including an investigation conducted by the Company, or (c) consistent with the Company’s legal duty to furnish information. To view the EEO is The Law Poster and the supplement, please click here or visit . Applicants with a disability who need assistance with the application process may contact Human Resources by email at or by calling 714.229.3813.

Job Description Who We Are Jaros, Baum & Bolles (JB&B) is a MEP engineering firm headquartered in New York City with additional offices in Boston and Philadelphia. For over 100 years, JB&B has leveraged cutting-edge technologies with sound engineering practices to create building designs that have transfigured the skyline, reimagined healthcare, and brought us closer to a sustainable, low-carbon future. We foster a collaborative, high-performing culture in which our employees share the common goal of creating a progressive, inclusive and fun work environment. JB&B values the voices and opinions of our employees. We are a team. We are a community. About the Role We are seeking a Project Engineer to join the HVAC department at our New York office. The Project Engineer is a technically skilled and experienced engineer with excellent communication, coordination, project management and leadership skills. The Project Engineer is expected to proactively coordinate, communicate, problem solve across disciplines, and exhibit the ability to balance the client relationship with an understanding of the project’s financial goals. As a Project Engineer, you’ll play a key role in managing and executing electrical engineering projects from design through completion. You’ll collaborate across disciplines, communicate directly with clients, and help ensure that both technical excellence and project financial goals are achieved. Key Responsibilities • Leads the design on Tenant fit-out projects and is a key designer on base building/infrastructure upgrades; assembles riser diagrams, schedules, and floor plans; participates in specification writing, • Assists in establishing design criteria from the project proposal and assembles basis of design documents, • Assembles a complete set of contract documents for their trade including the lay out main equipment rooms, closets, shafts, risers, etc., • Leads design for their trade’s ancillary systems required for a project and can assemble scope associated drawings with these systems (e.g., UPS, generators, fuel oil, secondary water pumps, water reclamation system, etc.), • Reviews shop drawings, RFI’s, Contractor change orders, performs site visits and punch-lists with limited supervision to verify that designs are being implemented accurately, • Bachelor’s degree in mechanical or electrical engineering, • 3-6 years of experience, • Excellent oral and written communication skills, • Proficient in all design calculations and software tools (e.g., Revit and AutoCAD) applicable to their discipline, • Strong understanding of trade-specific scope of project, trade-related codes, and the required coordination with other trades, • Strong understanding of documentation requirements and content for each deliverable phase (e.g., SD, DD, CD and specifications) Our employees are our greatest strength. We invest in our people and support their needs. • Hybrid workplace offering the flexibility to work both from home and the office, • Comprehensive benefits package including 401k employer match, • Paid time off (PTO), paid parental leave and inclusive holidays, • Training and professional development courses through JB&B University, • Multiple employee resource groups Jaros, Baum & Bolles is an equal opportunity employer. All qualified candidates will receive consideration for employment without regard to race, ethnicity, color, religion, sex, sexual orientation, gender identity, national origin, age, disability, marital status, military veteran status, unemployment status, or any other status protected by law. Powered by JazzHR c4hLE2TJT7

Job DescriptionAbout Us:Versana is an industry-backed data and technology company on a mission to make the syndicated loan market better. By digitally capturing agent banks’ data on a real-time basis, Versana provides unprecedented transparency into loan level details and portfolio positions, bringing efficiency and velocity to the entire market. Through our centralized platform, participants can rest assured they are accessing the loan market’s most credible source of deal information. With the support of our investors, Versana is fast becoming the technology of choice to usher in the long-awaited transformation of the syndicated loan market. About You:We are seeking a Software Engineer in Test to support the Versana Engineering Team in the development of automation frameworks, and design and development of test scripts to ensure quality and performance of our software applications. The ideal candidate should have a strong background in test automation frameworks, programming skills, creating performance testing frameworks and experience working in Agile development environments.Key Responsibilities • Develop and maintain test automation frameworks and integrate them into CI/CD pipelines., • Support Scrum Teams in API and UI testing on new and existing software and applications., • Review quality related deliverables, provide feedback, and ensure that the project aligns with industry standards and best practices at all stages of application lifecycle., • Collaborate with developers and product managers to understand requirements and create effective test plans., • Develop and maintain performance testing framework and integrate them into CI/CD pipelines., • Work with Domain teams to understand workload models for each system and gather Performance Requirements., • Conduct system performance testing to ensure system reliability, capacity, and scalability., • Create performance test plans and scenarios and develop test scripts in Jmeter/K6 to meet the objectives of the performance test plan., • Perform Load tests using Load Runner and analyze root causes of performance issues and recommend corrective actions., • Analyze test results, identify performance bottlenecks, and provide detailed reports to the development and management team., • Ensure software meets quality standards by working closely with Agile Scrum teams.Must Haves, • Bachelor's degree with 3 years of experiences required., • Strong background in Java and Unit Testing., • Strong background in Performance Testing., • Strong background in web and API testing tools., • Strong organizational, planning and analysis skills., • Prior testing experience in backend testing processes, including large data validation efforts., • Prior experience in Performance test scripting using JMeter, K6, and other tools., • Prior experience working with any APM tool., • Prior experience with Continuous Integration (Jenkins or similar tool) and Continuous Testing.

Job Description Dealpath is seeking a Senior Frontend/UI Engineer to lead the development of modern, high-performance user interfaces that power our AI-enabled deal management platform. In this role, you'll take ownership of our core UI architecture, contribute to an evolving design system, and ensure pixel-perfect implementation across browsers and devices. Working closely with product and design teams, you'll shape intuitive, responsive, and accessible interfaces that elevate the user experience and scale with our enterprise SaaS platform. If you're passionate about clean, scalable UI and excited by the opportunity to integrate AI technologies into workflow-driven products, we'd love to meet you. What You'll Do • Own the implementation and evolution of core UI components, design tokens, and styling architecture, • Lead frontend initiatives that raise the bar for accessibility, performance, and responsiveness, • Partner with product and design to explore and validate UI patterns early in the product lifecycle, • Ensure design fidelity and pixel-perfect delivery across browsers and devices, • Mentor other frontend/UI developers on best practices in CSS architecture, accessibility, and responsive design, • Contribute to and advocate for the expansion of our internal design system (e.g., with Figma, Storybook, or similar), • 5+ years of experience developing modern user interfaces for web applications, • Deep fluency in HTML5, CSS3/SASS, JavaScript, Typescript, and React, • Proven experience working with and/or maintaining design systems at scale, • Strong command of cross-browser compatibility, mobile-first development, and responsive layout techniques, • Proficiency in consuming AI inference APIs, • Comfortable navigating design tools and translating designs into code with high fidelity, • Experience with animation and interaction libraries (e.g., Framer Motion, GSAP), • Accessibility-minded: hands-on knowledge of ARIA, WCAG standards, and tooling like axe, Lighthouse, • Familiarity with frontend performance tuning and render profiling tools, • Background in enterprise SaaS or B2B platforms, • Medical, dental, & vision insurance coverage, • Hybrid 3 days in office policy, • Flexible Spending Account, • Paid Parental Leave, • 401(k), • Company sponsored commuter benefits, • Flexible time off policy, • Catered lunches and snacks, • The estimated base pay range for New York candidates for this position is $153,000 - $180,000. Your compensation will be based upon several factors including your experience, qualifications, education, location, and the skills assessed in Dealpath's interview process., • This position is also eligible for Dealpath's equity plan and variable compensation., • Your actual compensation will be confirmed in writing at the time of offer. Dealpath is the world's largest and most trusted real estate investment management platform. To date, Dealpath has powered over $10 trillion in transactions in partnership with hundreds of firms, from leading global institutions including Blackstone, Nuveen, LaSalle, CBRE IM, and MetLife to lean mid-market and regional organizations. Dealpath drives investment performance by uniting data, insights, and execution in a platform purpose-built for real estate, giving firms the tools they need to operate with speed and precision and unlock opportunity in a dynamic and competitive landscape where information reigns supreme. Our company is led by an experienced team and backed by a combination of top tier venture capital firms and strategic industry partners including: Blackstone, Nasdaq, 8VC, JLL Spark, WTI, GreenSoil Investments, LeFrak, Milstein, Bechtel, and Morgan Stanley Expansion Capital. We value your voice! If you get excited about solving real business challenges and working closely with other smart folks in a winning culture - we'd love to meet you!

Job DescriptionAbout the role We are looking for a generalist senior frontend engineer to join our early team in New York City. This role will work closely with our product and design team as well as the rest of our engineering team to build the user-facing aspects of the Starbridge platform. You'll figure out ways to build highly performant, stable frontends that allow us to explain technical concepts to non-technical users and create structures that allow us to build and iterate quickly and be responsive to customer feedback. You might be a fit if you: * Have 7+ years of software engineering experience working on modern web ecosystems. * Have 5+ years of experience with React, Typescript, Javascript, RESTful API, CSS, and other front-end technologies. * Are a team player who is excited to do what it takes to make the team successful. You're proactive both in how you work and how you communicate. * Are comfortable in a work environment that blends sync and async communication and work. * Set the highest possible UX and UI bar for the work you do. * Understands how code can affect performance and how to measure and optimize the work you do. * Are excited to build an in-person culture with us. Preferably, you also have experience with at least some of the following: * Experience as a technical lead making architectural design decisions. * Github CI/CD. After submitting your application, the team reviews your CV and statement of exceptional work. If your application passes this stage, you will be invited to a 20-minute phone interview during which a member of our team will make sure you're a good fit for the role. You will have the opportunity ask questions and learn more about the role as well. If you clear the initial phone interview, you will enter the main process, which consists of three interviews: * Experience, theory, and system design. * Live coding. * Product thinking and past work. Our goal is to finish the process within one week. All interviews will be conducted via Zoom. Why Join Starbridge * Ownership: You’ll play a foundational role in building our product and design culture * Autonomy: You’ll have space to experiment, iterate, and influence the roadmap * Trajectory: We’re seeing real traction and scaling fast. Revenue is doubling monthly! * Team: You’ll work with sharp, low-ego teammates who care deeply about craft and industry * Mission: Help modern companies sell into a $1.5T public sector with better intelligence About Starbridge At Starbridge, our mission is to catalyze a new era of public‑private partnerships in the $1.5T State, Local, and Education (SLED) market. We build tools that help companies identify early buying signals — from job changes to board meeting mentions — and reach the right person at the right time. Benefits include: * Competitive salary + early-stage equity * NYC office with snacks + free lunch * Health, dental, and vision insurance * Unlimited PTO * Regular offsites (NYC + beyond) Compensation Range: $180K - $220K