Trabajos system engineer en Trenton, New JerseyCrear alertas

Required: 4+ years of professional experience as a Java Developer, J2EE Developer, or Software Engineer Bachelor’s degree in computer science, Software Engineering, or a related technical discipline Work experience in all aspects of designing and constructing J2EE systems and developing system req

Job DescriptionPosition Overview We are seeking a Mechanical Plumbing Engineer to join our team. This role focuses on the design, analysis, and coordination of plumbing systems—including domestic water, sanitary, stormwater, fire protection, and specialty piping—for a range of projects across commercial, industrial, healthcare, and institutional sectors. The ideal candidate will be detail-oriented, collaborative, and able to deliver innovative, code-compliant designs while working seamlessly within a multidisciplinary project team. Key Responsibilities * Design and develop plumbing systems including domestic water, sanitary, storm, natural gas, fire protection, and specialty piping. * Perform calculations for hydraulic systems, pipe sizing, pressure loss, flow rates, and equipment selection. * Ensure compliance with plumbing codes, national standards, and green building requirements (e.g., IPC, NSPC, IFGC, ASPE, NFPA, LEED, WELL). * Prepare detailed construction documents including drawings, specifications, and schedules. * Participate in project meetings and communicate effectively with clients, contractors, and project stakeholders. * Coordinate design efforts with HVAC, electrical, structural, and architectural teams. * Conduct site visits, field inspections, and assessments to ensure compliance with design intent and applicable codes. * Review shop drawings, submittals, and RFIs during the construction administration phase. * Assist with technical reports, proposals, and cost estimates. * Provide mentorship and guidance to junior engineers and designers. Qualifications * Bachelor’s degree in Mechanical Engineering or a related field. * 5+ years of experience in plumbing system design for commercial, industrial, healthcare, or institutional projects. * Strong knowledge of relevant codes and standards (IPC, NSPC, IFGC, ASPE, NFPA). * Proficiency in AutoCAD, Revit, and Microsoft Office Suite. * Excellent problem-solving, time management, and communication skills. * EIT or PE license preferred. Compensation & Benefits * Competitive starting salary based on experience. * Comprehensive benefits package including: * 401(k) retirement plan * Health, dental, and vision insurance * Health savings account * Life insurance * Paid time off and holidays * Parental leave

Job Description Electrical Automation Engineer Facility: Trenton Plants General Description Responsible for evaluating the electrical hardware and software necessary to meet the automation needs of production. Design, program, and debug many types of equipment such as Programmable Logic Controllers (PLCs), Servos, Alternating Current (AC) and Direct Current (DC) drives, Instrumentation and Data Acquisition (DAQ) Systems. Must have a thorough understanding of safety system design and National and Local codes such as NEC, NFPA79, NFPA70-E, OSHA, and RIA. Should be proficient with Microsoft Office® products. Specific Duties • Follow all applicable environmental, health and safety rules and procedures and immediately report all dangerous situations, near-misses, and injuries., • Participate in developing and updating risk assessments and review all applicable risk assessments annually., • Write / interpret machine specifications for / from vendors., • Design appropriate safety level for each application to ensure operator safety., • Design and program PLC and HMI interfaces to assist manufacturing processes and eliminate bottlenecks., • Design and program DC drive, VFD, and Servo driven machine tools., • Calculate electrical power requirements for machine tools and data systems., • Integrate and program robotics into processes and machine tools., • Design data acquisition system to collect process data from machine tools., • Program displays and data acquisition systems using C programming language and Visual Basic., • Connect and program data acquisition system to SQL server., • Write SQL reports for managers or appropriate personnel for process troubleshooting., • Write technical manuals and machine-related documentation., • Must have a working knowledge of hydraulic and pneumatic systems., • Assist Maintenance / Production with higher level challenges. Other Duties Please note this job description is not designed to cover or contain a comprehensive listing of activities, duties or responsibilities that are required of the employee for this job. Duties, responsibilities, and activities may change at any time with or without notice. Qualifications • Graduated from an accredited technical school with an Electronic Engineering Degree in Electronic Technology or Industrial Systems with a minimum of ten years working as an Electronic Technician. Other Qualifications: • Must have a valid driver’s license., • Knowledge of State and Local electrical codes., • Must be able to work in a non-air-conditioned environment for a minimum of 8 hours per day., • Excellent technical skills., • Ability to speak Spanish is a plus. Personal Protective Equipment • Safety Glasses conforming to: ANSI Z87.1 or higher (required to enter mfg. area)., • Safety Shoes conforming to: ASTM F2413-05 PT Class 75 Protective Toe., • Ear Protection (Noise Reduction Rating 33 dB - as needed)., • Flame Resistant Clothing (as needed) when working around high voltage., • Electrically Insulated Gloves for general protection (as needed). Note: Gloves are never to be used around any rotating equipment (lathes, drums, windups, etc.). Hutchinson Industries, Inc. is an equal opportunity employer. This is an exempt position. Hutchinson Industries, Inc. reserves the right to modify the job description based upon its needs and may require the employee to perform functions beyond those mentioned above. Neither this job description nor any other communication creates an employment contract between Hutchinson Industries, Inc. or the employee, and either one may terminate employment without notice at any time.

Job DescriptionAbout GenScriptGenScript Biotech Corporation (Stock Code: 1548.HK) is a global biotechnology group. Founded in 2002, GenScript has an established global presence across North America, Europe, the Greater China, and Asia Pacific. GenScript's businesses encompass four major categories based on its leading gene synthesis technology, including operation as a Life Science CRO, enzyme and synthetic biology products, biologics development and manufacturing, and cell therapy.GenScript is committed to striving towards its vision of being the most reliable biotech company in the world to make humans and nature healthier through biotechnology.About ProBioProBio proactively provides end-to-end CDMO service from drug discovery to commercialization with proactive strategies, professional solutions and efficient processes in cell and gene therapy, vaccine, biologics discovery and antibody protein drug to accelerate drug development for customers. ProBio's total cell and gene therapy solution covers CMC of plasmid and virus for IND filing as well as clinical manufacturing and commercial manufacturing. Job Scope: The Automation Engineer is responsible for administration and management of the site's automation systems, including Supervisory Control and Data Acquisition (SCADA) system, PLCs, notification systems and computerized QC Lab instruments. The scope of the responsibilities includes the initial installation, ongoing maintenance, periodic back-up, change control, validation, and retirement of systems. The incumbent works cross-functionally with internal departments including Information Technology, Manufacturing, Facilities & Engineering, Quality Control, and Quality Assurance, as well as external resources/vendors to maintain the site's automation systems. The incumbent supports adherence to relevant regulatory requirements and company Standard Operating Procedures (SOPs) as appropriate. Responsibilities: • Work closely with stakeholders to understand and fulfill system requirements and improve the quality of automated processes., • Collaborate with stakeholders, including Area Managers, System Owners, and System Users to ensure successful onboarding, use and retirement of automation systems., • Develop appropriate Validation Protocols, Reports, and Lifecycle documents., • Execute Validation Protocols and collecting test evidence., • Create and improve Administration SOPs of automation systems, • Monitor integrity, availability, performance and operability of automation systems., • Identify, investigate and correct technical issues, including performing root cause analysis for production errors., • Make adjustments, enhancements and applying patches or upgrades as required for automation systems, while adhering to the Change Control process., • Understand network operations, system operations, and Cloud-based systems., • Administer user access management., • Ensure compliance with applicable regulatory standards., • Maintain up-to-date knowledge of current technology trends, programming languages, and automation best practices for bioprocess equipment including single-use bioreactors, chromatography controllers, ultrafiltration skids, and QC instruments., • Author appropriate Change Controls and Test Scripts and serve as the Subject Matter Expert for applicable technical changes in automation systems., • Recommend and integrate new bioprocess equipment and Process Analytical Technologies (PAT)., • Liaison with Business, Quality Assurance, Managed Services, and IT to coordinate the Change Request processes, • Training: * • cGxP, • Applicable Corporate and Departmental Directives, Policies, and Procedures, • Good Manufacturing Practices and Good Documentation Practices, • Automation Control and Data Acquisition, • EHS, • Lab/Biological Safety, • Expertise in IT Networking and industrial automation systems, such as Rockwell Automation (Allen Bradley RS Logix), Wonderware Archestra platform, TopView, Vaisala ViewLinc, Unicorn software, DeltaV, various Repligen and Thermo Scientific instruments is a plus., • Bachelor of Science in Electrical Engineering, Computer Science, IT, Engineering, or related field of study with at least 5-7 years of related experience that provides direct scientific knowledge of automation systems operation and validation principles for computerized biologics production systems., • Proven experience as an IT Automation Engineer or similar role., • Direct knowledge of the biologics process equipment, SCADA/control systems, and supporting IT networking infrastructure., • Expertise in scientific / technical subject areas – Equipment Qualification, Computer System Validation, SCADA system architecture, Biotech Process Equipment/Systems., • Proficient in use of electronic systems, such as Microsoft Office, various specialized software including process documentation Veeva Vault, Material Management (SAP), Computerized Maintenance Management System (Maximo), Building Automation System (BAS)., • Knowledge of domestic / international regulatory guidelines / compendia and industry standards (FDA, ICH, USP and EMEA guidelines) for validation of computerized equipment and automation systems, including but not limited to 21 CFR Part 11, EU Eudralex Annex 11 and GAMP 5., • Analytical thinker with excellent problem-solving skills and the ability to adapt to changing priorities and deadlines., • Comfort with collaboration, open communication, reaching across functional borders and being proactive., • A strong focus on business outcomes. #PB #LW GenScript USA Inc/ProBio Inc. is a proud equal opportunity/affirmative action employer committed to attracting, retaining, and maximizing the performance of a diverse and inclusive workforce. It is the Company's policy to ensure equal employment opportunity without discrimination or harassment based on race, color, religion, sex (including pregnancy, childbirth, or related medical conditions), sexual orientation, gender identity or expression, age, disability, national origin, marital or domestic/civil partnership status, genetic information, citizenship status, uniformed service member or veteran status, or any other characteristic protected by law. GenScript USA Inc./ProBio Inc. maintains a drug-free workplace. Please note: Genscript USA Inc./ProBio Inc. will only contact candidates through verified application sources. GenScript/Probio does not request personal information from candidates through individual email or any other platform.

Job DescriptionAbout GenScriptGenScript Biotech Corporation (Stock Code: 1548.HK) is a global biotechnology group. Founded in 2002, GenScript has an established global presence across North America, Europe, the Greater China, and Asia Pacific. GenScript's businesses encompass four major categories based on its leading gene synthesis technology, including operation as a Life Science CRO, enzyme and synthetic biology products, biologics development and manufacturing, and cell therapy.GenScript is committed to striving towards its vision of being the most reliable biotech company in the world to make humans and nature healthier through biotechnology.About ProBioProBio proactively provides end-to-end CDMO service from drug discovery to commercialization with proactive strategies, professional solutions and efficient processes in cell and gene therapy, vaccine, biologics discovery and antibody protein drug to accelerate drug development for customers. ProBio's total cell and gene therapy solution covers CMC of plasmid and virus for IND filing as well as clinical manufacturing and commercial manufacturing. Job Scope: Facilities Engineer will work with the Sr. Manager of Engineering, the integrated facility management group, Quality Management and Manufacturing Management on the daily operation of the manufacturing facility, utilities and processing / testing equipment at the Hopewell site. The role will involve review of equipment and system drawings, specifications, and submittals for general constructability, completeness, safety, maintainability, accessibility, operability, and conformance with the applicable codes, regulations, and design intent. Incumbent will ensure regulatory compliance of all inspection requirements; play a major role in end-user support, ongoing development, and support of the CMMS (Computerized Maintenance Management System). The incumbent must adhere to relevant regulatory requirements and company Standard Operating Procedures (SOPs) as appropriate. Essential responsibilities: • Review Equipment and System Drawings, Specifications, and Submittals for general, completeness, safety, maintainability, accessibility, operability, and conformance with the applicable codes, regulations, and design intent, • Review Change controls and IQOQ/PQ for new equipment onboarding and decommissioning., • Troubleshoot, determine root cause of problems and provide optimization strategies for utility systems and equipment within a multi-product, GMP facility., • Provide spare parts and reliability analyses for critical components, equipment, and systems, • Author and or review and approve documentation for QA Change Controls and Quality Events., • Serve as subject matter expert of the facilities/utilities/systems to support assigned work orders and close out facility related quality events as applicable, • Provide project team with utility system engineering design requirements and subject matter expertise. Communicate project requirements to vendors to obtain proposals for equipment and system ., • Manage CMMS System and configuration modules, workflow, development and user administration., • Support and maintain CMMS system reports; run queries and create ad hoc reports to support performance reporting , support compliance metrics and capacity planning., • Participates in and, as necessary, actively contributes to, investigator meetings., • Process GxP and non-Gxp lab instrument asset status updates (new, retirement, moves, owner changes, computer upgrades, etc.), • Create and revise formal work instruction that documented the standards for managing instruments within the CMMS (i.e. instrument naming conventions, parent / child hierarchical relationships, system owner identification, etc.)., • Assist in determining the appropriate service interval (frequency) and provider (internal vs. vendor) with owner's assistance Compensation: The salary range, dependent upon experience level, range is $80,000 - $110,000 annually. #PB #LW GenScript USA Inc/ProBio Inc. is a proud equal opportunity/affirmative action employer committed to attracting, retaining, and maximizing the performance of a diverse and inclusive workforce. It is the Company's policy to ensure equal employment opportunity without discrimination or harassment based on race, color, religion, sex (including pregnancy, childbirth, or related medical conditions), sexual orientation, gender identity or expression, age, disability, national origin, marital or domestic/civil partnership status, genetic information, citizenship status, uniformed service member or veteran status, or any other characteristic protected by law. GenScript USA Inc./ProBio Inc. maintains a drug-free workplace. Please note: Genscript USA Inc./ProBio Inc. will only contact candidates through verified application sources. GenScript/Probio does not request personal information from candidates through individual email or any other platform.

Job DescriptionSalary: Power Systems Engineer This job requires some travel acrossthe USA and extensive customer interaction on thephone and via email. Must have good command of English and excellent communication skills over the phone, in presentations, and in writing. Candidates with prior experience with power systems modeling and simulation are preferred. On-the-job training will be provided. The technical aspect of the job includes but is not limited to performing the following activities: • Marketing: It is a technical marketing activity where you interact with customers (researchers, professors, utility engineers, and power systems consultants) and provide them with technical details of our products and services and their requirements. Arrange and participate in product demonstrations at client sites, trade shows, and conferences. Our products include PSCAD - Electro Magnetic Transients; RTDS Real-time Hardware In Loop simulator; Spitzenberger and Spies amplifiers and test equipment., • Research and Development: Develop new models and systems using the above simulators, create case studies and application notes, andpublish when possible., • Consulting: Perform and participate in commercial power system simulation studies and testing using theabove simulation tools., • Commissioning and Training: Arrange and participate in customer training at our office and on-site. Participate in commissioning at customer sites and provide on-site training and technical support., • Customer Support: Provide technical support through phone, email, and online.

Job Description Essential Duties and Responsibilities • Sets up, maintains and creates content for Homasote's social media presence on Facebook, LinkedIn, Twitter, etc., • Assists Sales Operation Manager with trade show, lunch and learn events, and sales meeting administration., • Maintains marketing calendar and offers additional sales support to Millboard and Industrial sales team., • Maintains customer lists through email marketing database maintenance. Prints weekly analytic reports and distributes to management. Exports lists out of email marketing database for additional marketing projects., • Drives attendance to all events, tradeshows utilizing the email marketing system. Performs lead generation and follow-up utilizing email marketing program and show leads lists. Enters leads into email marketing system., • Receives sales orders by telephone, email. On repeat orders, updates prices and freight quotations, if necessary; obtains date from Production Department; clears credit with Accounting Department; fills out various computer work sheets for processing and inputs into the green screen system., • Answers inquiries (via telephone or email) from customers and salespersons concerning freight quotes, status of orders, availability, price and shipping promises. Expedites orders as required and advises customers and salespersons., • Handles orders and other customer maintenance through EDI and various web-based programs for national accounts. Keeps management abreast of any new requests., • Receives customers' telephone calls inquiring about technical information and refers them to the Sales Engineer., • Processes sample requests from salespersons and customers., • Answers operator line and directs calls as part of the phone team., • Other duties as assigned. Education and/or Experience • High School Diploma plus some college coursework in business administration or marketing, • 2 Years of experience in a support role function, • Experience in a manufacturing or factory environment a plus, • Proficiency in MS Word, Excel, Powerpoint, and familiarity with a green screen system Qualifications To perform this job successfully, an individual must be able to perform each essential duty satisfactorily. The requirements listed below are representative of the knowledge, skill, and/or ability required. • Must pass a physical, drug screen and criminal background check, • Must be legally authorized to work in the United States, • Excellent organizational skills and able to do basic math, • Able to work independently with attention to detail, • Able to follow direction and work effectively in a team environment, • Able to respond to stressful situations in a professional, courteous manner, • Able to effectively prioritize assignments to meet long-term and short-term deadlines, • Must have reliable form of transportation, • Must have either a cell phone or home land line Language Skills • Fluency in English, • Bi-lingual in Spanish a plus but not required, • Able to effectively communicate in verbal and written form to employees, management, executives, and customers, • Excellent phone etiquette, speaking voice and professional appearance

Job DescriptionBenefits: • 401(k), • 401(k) matching, • Dental insurance, • Health insurance, • Paid time off AID is a growing yet established consulting firm located in central New Jersey, offering professional services in non-destructive testing and evaluation (NDT/NDE) of highway infrastructure (bridges and pavements), pavement evaluation and design, geotechnical design and subsurface investigation, subsurface and utility mapping, and forensic studies. AID owns and operates an array of NDT equipment, including a Laser Crack Measurement System (LCMS), Falling Weight Deflectometer (FWD), various air-launched and ground- coupled Ground Penetrating Radar (GPR) antennas, and many others such as a high-speed profiler and walking profilers. In addition, AID runs its own soils, asphalt, and concrete materials testing laboratory. Job Description This full time Field Engineering Assistant position will primarily involve geophysical/electronic location and designation of subsurface utilities using surface geophysical equipment, including RF Pipe and Cable Locators, Ground Penetrating Radar, electromagnetic induction devices, record research, and documenting the work through the preparation of sketches, spreadsheets, and written reports. The ability to work minimal supervision is required. The ideal candidate should be prepared to work in the field, performing both utility mark out (locating, subsurface utility evaluation) and geophysical surveying activities. This position also entails office work, including, but not limited to, assisting with proposal and invoice preparation, using geophysical equipment software to interpret field data, and providing written reports with findings as well as presenting findings on CAD maps/plans. The candidate will perform this work mostly under the supervision of a senior engineer. The potential candidate must be open to work during day/night shifts and occasionally on the weekends. He/she will also be expected to assist in other areas of work, as needs dictate. Working in other NDT areas might be expected. This position will involve increasing responsibility, based on his/her performance and the needs of the company. Salary: $60,000/yr - $78,000/yr, depending on experience and credentials. Qualifications Minimum Qualifications • Associate degrees in engineering, geotechnical or physics fields., • Proficiency of AutoCAD and basic knowledge of Civil 3D., • Proficiency in computer and MS office, • Excellent communication skills, both written and verbal, with the ability to present complex information clearly and effectively., • Strong organizational skills and the ability to manage multiple tasks and deadlines., • Bachelors degrees in geotechnical or physics fields. Bachelors degree in civil engineering is a plus., • 2 years of experience in Civil Engineering fields, • Any experience in NDT and SUE fields is a plus, • Familiarity with CI/ASCE 38-22 standards and technical utility investigation is a plus. Job Site: This is a full time in person job. Prospective candidates should be able to commute or relocate to the Township of Hamilton, NJ, 08691.

Job DescriptionBlue Seal Boiler Operator Responsible for the proper operation and maintenance of boilers and all associated equipment in the Boiler Room. To ensure all services and support-systems originating in the Boiler Room are functioning properly to provide a safe, healthy, and comfortable environment for staff and visitors. Stands shift on a 24/7 schedule, operating and maintaining 2 stationary 1700hp boilers, related equipment, and systems that supply steam and hot water. The Boiler Operator will operate, maintain, and repair boilers, related equipment and systems, and will maintain Boiler Room Log books as well as shift checklists. Responsible to observe, as well as promote, State mandated safety regulations at all times. Report equipment malfunctions in the shift log book as well as to the Chief Engineer. JOB DUTIES AND RESPONSIBILITIES: • Keep current on all New Jersey Administrative Code updates, • Operate and monitor all boilers and support systems. Assure that boilers, support systems and related equipment are operating properly. Makes connections, adjustments and/or repairs as necessary., • Evaluate problems that may be encountered to determine their seriousness and corrects or reports to Chief Engineer. Notify appropriate manager of major breakdowns or malfunctions and assists in completing repairs., • Maintain daily logs of operation, maintenance, repair, and safety activities including but not limited to test results, instrument readings, details of equipment malfunctions, preventive maintenance tasks, maintenance/repair work orders, complete shift check list., • Test boiler water quality and/or arrange for testing. Take necessary corrective action such as adding chemicals to prevent corrosion and harmful deposits per the Chief Engineers direction., • Trouble shoot problems, activate valves to maintain required amounts of water in boilers, adjust supplies of combustion air as well as the flow of fuel to the burners. Monitor boiler controls, safety switch valves, gauges, burners, alarms, to detect leaks or malfunctions to ensure that the boilers, related equipment and systems are operating efficiently and safely as directed by the Chief Engineer., • Perform scheduled preventive maintenance tasks, perform scheduled work order repair, overhaul/replace valves, pumps, burners, controls, alarms, and coils (steam/hot water) as directed by the Chief Engineer., • Performs monthly Emergency Generator "No Load Test". Completes necessary documentation and immediately reports any problems to the Chief engineer., • Keeps Boiler Room areas and equipment clean and in an orderly safe manner at all times., • Informs Chief Engineer when fuel oil, water treatment chemicals, water treatment testing chemicals, recording charts, logs and all other supplies are running low., • Follows safety regulations and reports any hazards, malfunctions and repairs as needed., • Operate and maintain 4000kw co-generation unit., • Performs all other maintenance and repair tasks and other related duties as directed., • Operate and maintain a 4mw co-gen system and all related equipment Requirements: • NJ Blue seal steam license required, but will accept a High Pressure black seal with caveat to obtain NJ Blue seal within one year., • Have a working knowledge of the State of New Jersey Administrative CODE (NJAC) 12:90 boiler, pressure vessels, and refrigeration. #ZRCH

Job DescriptionPosition Overview We are seeking a Structural Engineer with 2–5+ years of experience to join our growing engineering team. This role involves the design, analysis, and coordination of structural systems for public works and private sector projects. The ideal candidate will bring strong technical expertise, project management skills, and the ability to collaborate effectively with multidisciplinary teams. This position includes responsibilities in design, project management, construction administration, and client interaction, offering a well-rounded opportunity for professional growth. Key Responsibilities * Design and analyze structural systems for bridges, buildings, and other infrastructure projects. * Ensure compliance with applicable building codes, standards, and regulations. * Prepare and review structural calculations, reports, drawings, and specifications. * Conduct field assessments and site visits to evaluate conditions and provide technical recommendations. * Collaborate with architects, civil engineers, and other design professionals to coordinate project requirements. * Participate in client and municipal meetings, presenting technical findings and project updates. * Monitor project timelines and budgets to ensure successful delivery. * Provide mentorship and review work prepared by junior engineers, CAD designers, and drafters. Required Qualifications * Bachelor’s degree in Civil or Structural Engineering (Master’s preferred). * 2–5+ years of structural engineering experience. * Engineer-in-Training (EIT) certification; Professional Engineer (PE) license in New Jersey preferred. * Proficiency in Revit, Civil 3D, and AutoCAD/MicroStation. * Strong communication, technical writing, and organizational skills. * Ability to manage multiple priorities in a fast-paced environment. Preferred Skills * Familiarity with Bluebeam for design collaboration and document management. * Knowledge of public works projects and municipal design standards. * Experience coordinating design review meetings and construction administration tasks. * Strong understanding of system design principles and project coordination. Compensation & Benefits * Competitive salary depending on experience. * Comprehensive benefits package including: * 401(k) with matching * Health, dental, and vision insurance * Health savings account (HSA) * Life insurance and AD&D coverage * Paid time off and holidays

Job DescriptionBenefits: • 401(k) matching, • Dental insurance, • Health insurance, • Paid time off AID is a growing yet established consulting firm located in central New Jersey, offering professional services in non-destructive testing and evaluation (NDT/NDE) of highway infrastructure (bridges and pavements), pavement evaluation and design, geotechnical design and subsurface investigation, subsurface and utility mapping, and forensic studies. AID owns and operates an array of NDT equipment, including a Laser Crack Measurement System (LCMS), Falling Weight Deflectometer (FWD), various air-launched and ground- coupled Ground Penetrating Radar (GPR) antennas, and many others such as a high-speed profiler and walking profilers. In addition, AID runs its own soils, asphalt, and concrete materials testing laboratory. Job Description The Senior Engineer position will involve performing engineering tasks, in the field, office, and lab, under the supervision of more senior engineers and managers. Your primary responsibilities will be to support and carry out non-destructive testing, evaluation, and reporting as it relates to transportation infrastructure. You may also be needed to assist in other areas of work, as needs dictate, especially assisting on Subsurface Utility Engineering (SUE). Based on your performance and the needs of the company, this position presents the potential for increased responsibility and growth within the firm. This is a full-time position with full benefits for a qualified applicant. The candidate should have at least B.S.C.E. degree (M.S.C.E. or higher preferred) with thorough knowledge of NDT technologies applied in civil engineering. He/she should be well-versed with NDT testing and analysis methods that include GPR (for Asphalt thickness measurement and Subsurface utility Engineering (SUE)), Impact Echo (IE), Surface Analysis of Seismic Waves (SASW), pavement testing and evaluation. Knowledge of other NDT technologies such as Infrared Thermography, Electrical Resistivity, Ultrasonic Testing, FWD, LCMS or others is highly desirable. It is also preferable that the candidate has some knowledge of geotechnical engineering and geophysical engineering. Effective oral and written communication skills are required. The immediate responsibilities of the successful candidate may include but are not limited to the execution of NDT/NDE projects, QC/QA of NDT engineering design projects as well as assisting with project management. These projects typically involve conducting site reconnaissance visits and performing NDT testing; evaluating the existing condition of pavements; locating subsurface utilities, analyzing conventional and NDT test data (e.g., analysis of GPR data, LCMS and back calculation of FWD data, etc.); preparing proposals and compiling cost estimates; invoices, as well as, preparing technically and grammatically sound project reports. The candidate is also expected to supervise other staff members, including NDT Technicians. Qualifications Minimum Qualifications • Bachelors degree in civil engineering or a related field (Masters degree or higher is preferred)., • At least 4 plus years of experience in NDT fields., • Strong proficiency in CI/ASCE 38-22 standards and technical utility investigation., • Expertise in geophysical testing and analysis methods, including EMI and GPR., • Proficiency in AutoCAD, MicroStation, Civil 3D, and GPR software (e.g., IDS-IQ Maps)., • Excellent communication skills, both written and verbal, with the ability to present complex information clearly and effectively., • Strong organizational skills and the ability to manage multiple projects and deadlines., • A minimum of 2 years in management or leadership role is a plus.

Job DescriptionPosition Summary We are seeking an experienced Project Engineer with 7+ years of civil engineering experience to support and manage a range of municipal and infrastructure projects. This role involves working on behalf of local governments, school districts, and private developers, overseeing the planning, design, and coordination of projects such as roads, utility systems, recreational facilities, public buildings, and land development applications. The Project Engineer will report directly to the Office Manager, supporting projects throughout the surrounding region. Key Responsibilities * Serve as the primary liaison and project manager for assigned municipal and public agency clients, acting as the main point of contact for all project activities. * Coordinate and oversee multiple engineering assignments to ensure quality, efficiency, and client satisfaction. * Apply a thorough understanding of municipal land use laws, development review procedures, bonding requirements, and compliance processes for planning board projects. * Develop practical and cost-effective engineering solutions for municipal infrastructure maintenance and improvement. * Prepare design plans and specifications for transportation, water, sewer, drainage, and site development projects using AutoCAD or similar tools. * Analyze technical data such as survey reports, maps, blueprints, and topographical information to guide design and construction decisions. * Perform hydraulic and structural calculations, including load, grade, and flow analyses, to support system design and project feasibility studies. * Estimate construction costs, quantities, materials, and labor to ensure project viability and adherence to budget. * Conduct studies on traffic, environmental conditions, and site layouts to assess potential impacts and design adjustments. * Ensure compliance with environmental, safety, and government regulations across all project phases. * Provide engineering support during construction, including responding to RFIs, reviewing shop drawings, and coordinating with field inspectors. * Attend municipal and public meetings to present engineering reports, project updates, and development reviews in a professional and effective manner. * Advise clients on design alternatives, capital planning, and infrastructure upgrades. Qualifications & Skills * Bachelor’s Degree in Civil Engineering from an accredited institution. * Professional Engineer (PE) license required. * Previous experience in municipal or public infrastructure projects preferred. * Strong understanding of civil engineering principles, design standards, and municipal review processes. * Proficient with AutoCAD and other design or modeling software. * Excellent written and verbal communication skills, with the ability to lead presentations at public meetings. * Strong analytical and problem-solving abilities; capable of managing multiple priorities simultaneously. * Collaborative team player with the ability to work independently when needed. Work Environment & Physical Requirements * Primarily office-based with occasional fieldwork at active project sites and public meetings. * Must be able to lift up to 25 lbs occasionally and work in various outdoor weather conditions during field visits. * Frequent computer use required. * Valid driver’s license and access to a personal vehicle required. Compensation & Benefits * Competitive Salary based on experience, location, and qualifications. * Comprehensive benefits package including: * Medical, dental, and vision insurance * 401(k) retirement plan with company match * Life and disability insurance * Paid holidays and PTO * Paid parental leave * Tuition reimbursement and professional development support * Wellness initiatives and employee assistance programs

Job DescriptionBenefits: • 401(k), • 401(k) matching, • Dental insurance, • Health insurance, • Paid time off AID is a growing yet established consulting firm located in central New Jersey, offering professional services in non-destructive testing and evaluation (NDT/NDE) of highway infrastructure (bridges and pavements), pavement evaluation and design, geotechnical design and subsurface investigation, subsurface and utility mapping, and forensic studies. AID owns and operates an array of NDT equipment, including a Laser Crack Measurement System (LCMS), Falling Weight Deflectometer (FWD), various air-launched and ground- coupled Ground Penetrating Radar (GPR) antennas, and many others such as a high-speed profiler and walking profilers. In addition, AID runs its own soils, asphalt, and concrete materials testing laboratory. Job Description This full time Field Engineering Assistant position will primarily involve geophysical/electronic location and designation of subsurface utilities using surface geophysical equipment, including RF Pipe and Cable Locators, Ground Penetrating Radar, electromagnetic induction devices, record research, and documenting the work through the preparation of sketches, spreadsheets, and written reports. The ability to work minimal supervision is required. The ideal candidate should be prepared to work in the field, performing both utility mark out (locating, subsurface utility engineering) and geophysical surveying activities. This position also entails office work, including, but not limited to, assisting with proposal and invoice preparation, using geophysical equipment software to interpret field data, and providing written reports with findings as well as presenting findings on CAD maps/plans. The candidate will perform this work mostly under the supervision of a senior engineer. The potential candidate must be open to work during day/night shifts and occasionally on the weekends. He/she will also be expected to assist in other areas of work, as needs dictate. Working in other NDT areas might be expected. This position will involve increasing responsibility, based on his/her performance and the needs of the company. Salary: $60,000/yr - $78,000/yr, depending on experience and credentials. Qualifications Minimum Qualifications • Associate degrees in civil engineering, geotechnical or physics fields., • Proficiency of AutoCAD and basic knowledge of Civil 3D., • Proficiency in computer and MS office, • Excellent communication skills, both written and verbal, with the ability to present complex information clearly and effectively., • Strong organizational skills and the ability to manage multiple tasks and deadlines., • Bachelors degrees in geotechnical or physics fields. Bachelors degree in civil engineering is a plus., • 2 years of experience in Civil Engineering fields, • Any experience in NDT and SUE fields is a plus, • Familiarity with CI/ASCE 38-22 standards and technical utility investigation is a plus. This is a full time in person job. Prospective candidates should be able to commute or relocate to the Township of Hamilton, NJ, 08691 To apply, send your resume to the following email with the subject: SUE Engineering

Azure Data Engineer , you will make an impact by driving end-to-end data integration and migration initiatives across enterprise data platforms. You will be a valued member of our Data Engineering & Analytics team and work collaboratively with product owners, architects, and cross-functional stakeho

Oversee operation and management of routine and emergency services on a variety of critical systems such as: switchgear, generators, UPS systems, power distribution equipment, chillers, cooling towers, computer room air handlers, building monitoring systems, etc. Equipment will include but is not li

The “Senior Engineer” position will involve performing engineering tasks, in the field, office, and lab, under the supervision of more senior engineers and managers. It is also preferable that the candidate has some knowledge of geotechnical engineering and geophysical engineering. Professional

As a SIEM Data Engineer, you will be responsible for designing, implementing, and maintaining solutions that enhance data visibility, transform data, and improve overall data quality in collaboration with data product managers, architects, engineers, and other team members to deliver SIEM & analytic

By bringing deep expertise in security engineering, you will help drive the strategic development of our enterprise security threat program. We are seeking a seasoned security engineering professional to join our T1/2 DLP operations team to investigate alerts through tooling and perform triage and r

Create data extraction processes within client systems which enable the continual delivery of client data from source system to target system. Work directly with clients (onsite and/or remotely) to identify and extract data from numerous distinct data systems. Import received data into internal Data

Proficient in CAD, ERP systems, and Microsoft Office Suite. Mechanical Engineer - Plant Operations. Staffmark is seeking a Mechanical Engineer to support plant operations, maintenance, and production optimization.

Background in electrical design, drafting, or engineering. Understanding of building electrical systems and related codes. We are seeking an experienced 3D electrical design engineer to produce coordinated construction drawings and models for commercial building projects.

Oversee operation and management of routine and emergency services on a variety of critical systems such as: switchgear, generators, UPS systems, power distribution equipment, chillers, cooling towers, computer room air handlers, building monitoring systems, etc. Equipment will include but is not li

Senior Project Manager/Electrical Engineer-Hyperscale Data Center Construction Job ID 244556 Posted 29-Oct-2025 Service line PJM Segment Role type Full-time Areas of Interest Construction, Data Centers, Project Management Location(s) Remote - US - Remote - US - United States of America

Senior Project Manager/Electrical Engineer-3rd Party Data Center Construction Job ID 244733 Posted 29-Oct-2025 Service line PJM Segment Role type Full-time Areas of Interest Construction, Data Centers, Engineering/Maintenance, Project Management Location(s) Remote - US - Remote - US - Un