Trabajos system engineer en Troy, New YorkCrear alertas

Working at the Naval Nuclear Laboratory we foster pride in belonging to an organization whose culture is made up of these core values: Trust, Empowerment, and Collaboration. Our company promotes a positive culture while ensuring the safety and reliability of our nation's naval nuclear reactors, and training the Sailors who operate those reactors in the U.S. Navy's submarines and aircraft carrier Fleets. Looking for a lifetime career? Apply today! Job Description The Integrated Power System's unit within Submarine Programs is seeking a highly skilled control system engineer with expertise in designing, implementing, and optimizing control systems for complex dynamic systems that integrate coupled mechanical-electric-fluid dynamic disciplines. This role requires strong foundations in control theory, modeling & simulation, and real?time implementation. The engineer will collaborate with multidisciplinary teams to design control strategies, validate performance, and support integration into hardware or embedded environments. The position requires a balance of theoretical knowledge, practical hands- on skills, and the ability to collaborate with engineers from diverse technical backgrounds. The work location for this position is full-time at the Knolls site. Key Responsibilities Develop advanced feedback and feedforward control solutions using adaptive, nonlinear, robust, and optimal control methods for coupled mechanical-electric-fluid dynamic systems. Build and validate dynamic system models; performing system identification when required. Lead the system integration of components such as actuators, sensors, and real-time processing for distributed control platforms. Conduct stability, performance, and robustness analyses using modern control techniques. Implement real?time control algorithms on embedded platforms, microcontrollers or DSPs. Perform simulation, verification, and validation using MATLAB/Simulink or equivalent tools. Support hardware?in?the?loop testing, data acquisition, and tuning of controllers. Collaborate with electrical, mechanical, software, and systems engineering teams. Troubleshoot system behavior and optimize control performance during integration and testing. Document models, design decisions, test results, and control strategies clearly and accurately. Required Combination of Knowledge and Skill Bachelors degree from an accredited college or university in electrical, mechanical or systems engineering and a minimum of 6 years of relevant experience; or Masters degree from an accredited college or university in electrical, mechanical or systems engineering and a minimum of 4 years of relevant experience; or Doctorate degree from an accredited college or university in electrical, mechanical or systems engineering and a minimum of 1 year of relevant experience. Preferred Skills Academic background featuring a concentration, track, or elective sequence in control systems. Relevant experience with advanced control methods such as adaptive control (e.g., Filtered-X LMS), optimal control (LQR, MPC), robust control, or nonlinear control. Relevant experience with system modeling & simulation tools such as MATLAB/Simulink, Simscape, or similar platforms. Relevant experience with real?time control implementation on embedded systems using MATLAB/Simulink environments. Experience with HIL systems, digital twins, or real?time simulation platforms. Familiarity with optimization techniques and advanced estimation methods. Background in robotics, electromechanical systems, power systems, propulsion, or automation. Knowledge of machine learning or reinforcement learning applied to control systems. Experience with data acquisition, sensor/actuator interfacing, and lab testing environments Compensation and Benefits Health, Dental, Vision & Voluntary Benefits Disability, Life & Accident Insurance 401(k) Savings program & Capital Accumulation Plan Personal & Medical Time Off Paid Parental Leave Flexible Work Schedules Tuition Assistance for Eligible Employees Student Debt Benefit Personal Time Off Sell Program Employee Assistance Program (EAP) Wellness Program Visit us online to view all NNL benefits! Pay Range $94,800.00 - $148,200.00 annually Salary information provided is a general guideline only. Annual salary is based upon candidate experience and qualifications, as well as market and business considerations. The Naval Nuclear Laboratory is operated for the U.S. Department of Energy (DOE) by Fluor Marine Propulsion, LLC (FMP), a wholly owned subsidiary of Fluor Corporation. Naval Nuclear Laboratory personnel are FMP employees who work at four DOE facilities: Bettis Atomic Power Laboratory, Knolls Atomic Power Laboratory, Kenneth A. Kesselring Site, and Naval Reactors Facility, and at the U.S. Department of Defense-owned Nuclear Power Training Unit-Charleston. FMP employees also have an established presence at numerous shipyards and vendor locations. For nearly 70 years, the Naval Nuclear Laboratory has developed advanced nuclear propulsion technology, provided technical support, and trained world-class nuclear operators to ensure the safe and reliable operation of our nation's submarine and aircraft carrier Fleets. The Naval Nuclear Laboratory is a national asset solely dedicated to the Naval Nuclear Propulsion Program. We rely on the dedication and innovation of our nearly 8000 engineers, scientists, technicians, and support personnel. All candidates must be U.S. citizens. Applicants selected will be subject to a Federal background investigation and must meet eligibility requirements for access to classified matter. FMP is a government contractor and maintains a drug free workplace and workforce. All candidates must be able to pass a drug test in compliance with FMP company policy and 10 CFR 707. Marijuana is a Federal Schedule I controlled substance and illegal under Federal Law. Therefore, FMP is required to test for marijuana. Fluor Marine Propulsion, LLC is an Equal Opportunity Employer, including disability/vets. All qualified applicants will receive consideration for employment without regard to race, color, age, sex, religion, national origin, disability, veteran status, genetic information, or any other criteria protected by federal, state, or local law.

Working at the Naval Nuclear Laboratory we foster pride in belonging to an organization whose culture is made up of these core values: Trust, Empowerment, and Collaboration. Our company promotes a positive culture while ensuring the safety and reliability of our nation's naval nuclear reactors, and training the Sailors who operate those reactors in the U.S. Navy's submarines and aircraft carrier Fleets. Looking for a lifetime career? Apply today! Job Description The Naval Nuclear Laboratory is seeking an experienced Compliance Engineer to join our Environmental, Safety & Health (ESH) team in Niskayuna, NY! This position has responsibilities spanning the disciplines of environmental protection, occupational safety, and hazardous materials management. The Compliance Engineer interfaces daily with site operations organizations, construction project teams, and subcontractor personnel during all work phases including pre-conceptual, pre-job, and work execution. This role serves as an in-field subject matter expert (SME) in ESH disciplines to ensure compliance with federal/state regulations and applicable DOE Orders and is available to provide consultation to the subcontractor on ESH requirements, however, the subcontractor is responsible for determining the means and methods to perform work. Responsibilities include: Ensure compliance with Federal/State regulations and applicable DOE Orders, e.g., Consolidated State Facility Air Permit (CASFP), State Pollution Discharge Elimination System (SPDES), Municipal Separate Storm Sewer System (MS4), Resource Conservation and Recovery Act (RCRA), Sanitary Sewage, Petroleum Bulk Storage (PBS), Asbestos NESHAP Notifications, National Environmental Policy Act (NEPA), and PCBs. Maintain cognizance of latest environmental regulatory monitoring and reporting requirements and developing implementation and monitoring programs to assure compliance in assigned media areas. Conduct inspections of site facilities and provide oversight of laboratory operations, preventative and corrective maintenance tasks, building construction, renovation, and demolition. Measure, audit, and evaluate the effectiveness of compliance programs to ensure compliance with safety standards and requirements. Required Combination of Knowledge and Skill Bachelors degree from an accredited college or university in a related technical, engineering or science field and a minimum of 6 years of relevant experience; or Masters degree from an accredited college or university in a related technical, engineering or science field and a minimum of 4 years of relevant experience; or Doctorate degree from an accredited college or university in a related technical, engineering or science field and a minimum of 1 year of relevant experience; or Currently an Senior Reactor Training Engineer, Refueling Engineer, or Field (RPCO) Engineer at the Company. Preferred Skills Previous regulatory compliance experience in environmental protection, occupational safety and health, or hazardous materials management Comprehensive knowledge of state and federal compliance requirements and consensus standards (e.g., OSHA, EPA, NFPA, ANSI) Professional Engineering (PE) license, professional certification in an ESH discipline, or desire to obtain Ability to work within a team and independently Multi-task oriented Strong analytical and technical writing skills Compensation and Benefits Health, Dental, Vision & Voluntary Benefits Disability, Life & Accident Insurance 401(k) Savings program & Capital Accumulation Plan Personal & Medical Time Off Paid Parental Leave Flexible Work Schedules Tuition Assistance for Eligible Employees Student Debt Benefit Personal Time Off Sell Program Employee Assistance Program (EAP) Wellness Program Visit us online to view all NNL benefits! Pay Range $95,700.00 - $149,600.00 annually Salary information provided is a general guideline only. Annual salary is based upon candidate experience and qualifications, as well as market and business considerations. The Naval Nuclear Laboratory is operated for the U.S. Department of Energy (DOE) by Fluor Marine Propulsion, LLC (FMP), a wholly owned subsidiary of Fluor Corporation. Naval Nuclear Laboratory personnel are FMP employees who work at four DOE facilities: Bettis Atomic Power Laboratory, Knolls Atomic Power Laboratory, Kenneth A. Kesselring Site, and Naval Reactors Facility, and at the U.S. Department of Defense-owned Nuclear Power Training Unit-Charleston. FMP employees also have an established presence at numerous shipyards and vendor locations. For nearly 70 years, the Naval Nuclear Laboratory has developed advanced nuclear propulsion technology, provided technical support, and trained world-class nuclear operators to ensure the safe and reliable operation of our nation's submarine and aircraft carrier Fleets. The Naval Nuclear Laboratory is a national asset solely dedicated to the Naval Nuclear Propulsion Program. We rely on the dedication and innovation of our nearly 8000 engineers, scientists, technicians, and support personnel. All candidates must be U.S. citizens. Applicants selected will be subject to a Federal background investigation and must meet eligibility requirements for access to classified matter. FMP is a government contractor and maintains a drug free workplace and workforce. All candidates must be able to pass a drug test in compliance with FMP company policy and 10 CFR 707. Marijuana is a Federal Schedule I controlled substance and illegal under Federal Law. Therefore, FMP is required to test for marijuana. Fluor Marine Propulsion, LLC is an Equal Opportunity Employer, including disability/vets. All qualified applicants will receive consideration for employment without regard to race, color, age, sex, religion, national origin, disability, veteran status, genetic information, or any other criteria protected by federal, state, or local law.

Working at the Naval Nuclear Laboratory we foster pride in belonging to an organization whose culture is made up of these core values: Trust, Empowerment, and Collaboration. Our company promotes a positive culture while ensuring the safety and reliability of our nation's naval nuclear reactors, and training the Sailors who operate those reactors in the U.S. Navy's submarines and aircraft carrier Fleets. Looking for a lifetime career? Apply today! Job Description This position is responsible for providing technical engineering guidance to the Knolls Fire Protection (KFP) unit. The primary function of the group is to ensure that all fire protection program requirements are developed, documented, and maintained to align with current industry standards and regulatory mandates, thereby ensuring the continued safety and compliance of site operations and the well-being of all personnel. As Principal Lead Engineer, you will serve as the subject matter expert in engineering work processes and workflow management across the unit. While your main focus will be on the creation, standardization, and enforcement of formal engineering processes that govern how work is planned, executed, and recorded, it is also essential that you maintain a broad, working understanding of fire protection principles, system types, and applicable codes and standards. This technical overview will equip you to integrate robust process standards with the practical and regulatory requirements of fire protection engineering. Core responsibilities include authoring and institutionalizing clear operational procedures, supporting compliance and scheduling efforts, and facilitating consistent communication and coordination. Primary stakeholders for this role include Building Superintendents, Facility Design, Infrastructure and Maintenance Engineering, Emergency Services & Systems, Space Planning & Renovations, and Radiological and Asbestos Programs. In collaboration with these groups, you will mentor and guide junior staff, uphold standards of work quality and compliance, and serve as the principal resource for driving effective engineering workflow throughout the fire protection program. Required Combination of Knowledge and Skill Bachelors degree from an accredited college or university in a related technical, engineering or science field and a minimum of 9 years of relevant experience; or Masters degree from an accredited college or university in a related technical, engineering or science field and a minimum of 7 years of relevant experience; or Doctorate degree from an accredited college or university in a related technical, engineering, science field and a minimum of 3 years of relevant experience; or Currently a Principal Reactor Training Engineer, Refueling Engineer, or Field (RPCO) Engineer at the Company. Preferred Skills • Proven ability to mentor engineers and lead the development, implementation, and management of engineering processes and procedures in operations and facilities environments • Expertise in engineering process development, documentation, work control, and regulatory compliance • Strong coordination and communication skills across multidisciplinary teams, including operations, maintenance, management, and vendors • Working knowledge of NFPA codes and standards, as well as International and New York State building/fire codes • Relevant experience executing facility and infrastructure work at the Knolls Laboratory Site Compensation and Benefits Health, Dental, Vision & Voluntary Benefits Disability, Life & Accident Insurance 401(k) Savings program & Capital Accumulation Plan Personal & Medical Time Off Paid Parental Leave Flexible Work Schedules Tuition Assistance for Eligible Employees Student Debt Benefit Personal Time Off Sell Program Employee Assistance Program (EAP) Wellness Program Visit us online to view all NNL benefits! Pay Range $105,200.00 - $164,400.00 annually Salary information provided is a general guideline only. Annual salary is based upon candidate experience and qualifications, as well as market and business considerations. The Naval Nuclear Laboratory is operated for the U.S. Department of Energy (DOE) by Fluor Marine Propulsion, LLC (FMP), a wholly owned subsidiary of Fluor Corporation. Naval Nuclear Laboratory personnel are FMP employees who work at four DOE facilities: Bettis Atomic Power Laboratory, Knolls Atomic Power Laboratory, Kenneth A. Kesselring Site, and Naval Reactors Facility, and at the U.S. Department of Defense-owned Nuclear Power Training Unit-Charleston. FMP employees also have an established presence at numerous shipyards and vendor locations. For nearly 70 years, the Naval Nuclear Laboratory has developed advanced nuclear propulsion technology, provided technical support, and trained world-class nuclear operators to ensure the safe and reliable operation of our nation's submarine and aircraft carrier Fleets. The Naval Nuclear Laboratory is a national asset solely dedicated to the Naval Nuclear Propulsion Program. We rely on the dedication and innovation of our nearly 8000 engineers, scientists, technicians, and support personnel. All candidates must be U.S. citizens. Applicants selected will be subject to a Federal background investigation and must meet eligibility requirements for access to classified matter. FMP is a government contractor and maintains a drug free workplace and workforce. All candidates must be able to pass a drug test in compliance with FMP company policy and 10 CFR 707. Marijuana is a Federal Schedule I controlled substance and illegal under Federal Law. Therefore, FMP is required to test for marijuana. Fluor Marine Propulsion, LLC is an Equal Opportunity Employer, including disability/vets. All qualified applicants will receive consideration for employment without regard to race, color, age, sex, religion, national origin, disability, veteran status, genetic information, or any other criteria protected by federal, state, or local law.

Working at the Naval Nuclear Laboratory we foster pride in belonging to an organization whose culture is made up of these core values: Trust, Empowerment, and Collaboration. Our company promotes a positive culture while ensuring the safety and reliability of our nation's naval nuclear reactors, and training the Sailors who operate those reactors in the U.S. Navy's submarines and aircraft carrier Fleets. Looking for a lifetime career? Apply today! Job Description This electrical engineering position at the Naval Nuclear Laboratory (NNL) will focus on the design, integration, testing, deployment, and support of the next generation design electrical instrumentation and control systems for the United States Navy. This position involves the direct interaction with the Navy, shipyards, vendors, and customers. This is an excellent opportunity to gain experience with mission-critical shipboard electrical systems and to make a significant impact to the technology that protects our country. NNL develops and supports the world's safest and most advanced reactor plants. This position deals with shipboard systems that perform essential reactor protection and control functions, demanding the highest degree of quality and reliability. The position supports the design development of the next generation submarines. The successful candidate's duties will include maintaining and implementing improvements to hardware and software system designs for various shipboard control systems, development and maintenance of procedures for equipment operation, troubleshooting instrumentation and control system issues, developing and performing equipment tests, performing detailed technical evaluations, and authoring technical reports. Duties will also include regular verbal and written communications with co-workers, shipyard counterparts, management, and customers. Required Combination of Knowledge and Skill Bachelors degree from an accredited college or university in Electrical or Computer Engineering and a minimum of 4 years of relevant experience; or Masters degree from an accredited college or university in Electrical or Computer Engineering and a minimum of 2 years of relevant experience; or Doctorate degree from an accredited college or university in Electrical or Computer Engineering; or Currently an Advanced Reactor Training Engineer, Refueling Engineer, or Field (RPCO) Engineer at the Company. Preferred Skills Minimum GPA 3.0/4.0. Co-op, internship or prior work experience in a technical field. Coursework or experience with computer programming. Experience working effectively within a team environment through academic or previous work experience. Demonstrated self-starter. Demonstrated leadership and interpersonal skills are highly desirable. Strong written and verbal communications skills with an ability to articulate technical ideas in a clear and concise manner. Specific coursework and/or work experience in control systems. Specific coursework and/or work experience in power electronics. Specific coursework and/or work experience in hardware/software development. Specific coursework and/or work experience in microprocessor based equipment. Compensation and Benefits Health, Dental, Vision & Voluntary Benefits Disability, Life & Accident Insurance 401(k) Savings program & Capital Accumulation Plan Personal & Medical Time Off Paid Parental Leave Flexible Work Schedules Tuition Assistance for Eligible Employees Student Debt Benefit Personal Time Off Sell Program Employee Assistance Program (EAP) Wellness Program Visit us online to view all NNL benefits! Pay Range $85,200.00 - $133,200.00 annually Salary information provided is a general guideline only. Annual salary is based upon candidate experience and qualifications, as well as market and business considerations. The Naval Nuclear Laboratory is operated for the U.S. Department of Energy (DOE) by Fluor Marine Propulsion, LLC (FMP), a wholly owned subsidiary of Fluor Corporation. Naval Nuclear Laboratory personnel are FMP employees who work at four DOE facilities: Bettis Atomic Power Laboratory, Knolls Atomic Power Laboratory, Kenneth A. Kesselring Site, and Naval Reactors Facility, and at the U.S. Department of Defense-owned Nuclear Power Training Unit-Charleston. FMP employees also have an established presence at numerous shipyards and vendor locations. For nearly 70 years, the Naval Nuclear Laboratory has developed advanced nuclear propulsion technology, provided technical support, and trained world-class nuclear operators to ensure the safe and reliable operation of our nation's submarine and aircraft carrier Fleets. The Naval Nuclear Laboratory is a national asset solely dedicated to the Naval Nuclear Propulsion Program. We rely on the dedication and innovation of our nearly 8000 engineers, scientists, technicians, and support personnel. All candidates must be U.S. citizens. Applicants selected will be subject to a Federal background investigation and must meet eligibility requirements for access to classified matter. FMP is a government contractor and maintains a drug free workplace and workforce. All candidates must be able to pass a drug test in compliance with FMP company policy and 10 CFR 707. Marijuana is a Federal Schedule I controlled substance and illegal under Federal Law. Therefore, FMP is required to test for marijuana. Fluor Marine Propulsion, LLC is an Equal Opportunity Employer, including disability/vets. All qualified applicants will receive consideration for employment without regard to race, color, age, sex, religion, national origin, disability, veteran status, genetic information, or any other criteria protected by federal, state, or local law.

Working at the Naval Nuclear Laboratory we foster pride in belonging to an organization whose culture is made up of these core values: Trust, Empowerment, and Collaboration. Our company promotes a positive culture while ensuring the safety and reliability of our nation's naval nuclear reactors, and training the Sailors who operate those reactors in the U.S. Navy's submarines and aircraft carrier Fleets. Looking for a lifetime career? Apply today! Job Description The Future Plant Instrumentation and Control (FPIC) Unit in Future Development Programs is a cross-site team responsible for driving technology and developing electrical designs for the VIRGINIA Class based Improved Performance Machinery Program Phase IV (IPMP) and SSN(X). This position will provide an opportunity for the successful candidate to contribute significantly to the technical approach and delivery strategy for the integration of electrical power systems for the future plant submarine. The successful candidate for this position will integrate the electrical power systems by using his/her technical knowledge of design, testing, and operation of shipboard systems as well as the application of NR Program principles and established design methods. Specific responsibilities for this position are delivering on technical work, teaming with multiple stakeholders (both internal and external to NNL), and work planning for cognizant efforts. Occasional work travel between sites, to EB, and to Newport News for working meetings is required. Required Combination of Knowledge and Skill Bachelors degree from an accredited college or university in a related technical, engineering or science field and a minimum of 6 years of relevant experience; or Masters degree from an accredited college or university in a related technical, engineering or science field and a minimum of 4 years of relevant experience; or Doctorate degree from an accredited college or university in a related technical, engineering or science field and a minimum of 1 year of relevant experience; or Currently a Senior Reactor Training Engineer, Refueling Engineer, or Field (RPCO) Engineer at the Company. Preferred Skills Experience with I&C system design. Experience with submarine power system design. Experience with power electronics/PCMs. Demonstrated ability to communicate with Naval Reactors verbally or in written format. Demonstrated ability to work with stakeholders across multiple organizations and locations. Compensation and Benefits Health, Dental, Vision & Voluntary Benefits Disability, Life & Accident Insurance 401(k) Savings program & Capital Accumulation Plan Personal & Medical Time Off Paid Parental Leave Flexible Work Schedules Tuition Assistance for Eligible Employees Student Debt Benefit Personal Time Off Sell Program Employee Assistance Program (EAP) Wellness Program Visit us online to view all NNL benefits! Pay Range $94,800.00 - $148,200.00 annually Salary information provided is a general guideline only. Annual salary is based upon candidate experience and qualifications, as well as market and business considerations. The Naval Nuclear Laboratory is operated for the U.S. Department of Energy (DOE) by Fluor Marine Propulsion, LLC (FMP), a wholly owned subsidiary of Fluor Corporation. Naval Nuclear Laboratory personnel are FMP employees who work at four DOE facilities: Bettis Atomic Power Laboratory, Knolls Atomic Power Laboratory, Kenneth A. Kesselring Site, and Naval Reactors Facility, and at the U.S. Department of Defense-owned Nuclear Power Training Unit-Charleston. FMP employees also have an established presence at numerous shipyards and vendor locations. For nearly 70 years, the Naval Nuclear Laboratory has developed advanced nuclear propulsion technology, provided technical support, and trained world-class nuclear operators to ensure the safe and reliable operation of our nation's submarine and aircraft carrier Fleets. The Naval Nuclear Laboratory is a national asset solely dedicated to the Naval Nuclear Propulsion Program. We rely on the dedication and innovation of our nearly 8000 engineers, scientists, technicians, and support personnel. All candidates must be U.S. citizens. Applicants selected will be subject to a Federal background investigation and must meet eligibility requirements for access to classified matter. FMP is a government contractor and maintains a drug free workplace and workforce. All candidates must be able to pass a drug test in compliance with FMP company policy and 10 CFR 707. Marijuana is a Federal Schedule I controlled substance and illegal under Federal Law. Therefore, FMP is required to test for marijuana. Fluor Marine Propulsion, LLC is an Equal Opportunity Employer, including disability/vets. All qualified applicants will receive consideration for employment without regard to race, color, age, sex, religion, national origin, disability, veteran status, genetic information, or any other criteria protected by federal, state, or local law.

Senior Backend Software Engineer – Startup – New York • Visa sponsorship not available, US Citizens only. Please do not apply if you are seeking sponsorship* Senior Backend Software Engineer is required by a startup building a technology platform for behavioural health organizations to enhance mental health care delivery using AI. You should have 10+ years of professional backend software development experience who has a proven track record of delivering backend services end-to-end: designing APIs, building scalable systems, and deploying to production. You should be comfortable architecting solutions from scratch, navigating extreme ambiguity, and distilling competing priorities into clear, actionable technical designs. Bonus points if you have experience with or a strong interest in HIPAA-compliant infrastructure and healthcare data systems. Requirements • 10+ years of experience in professional backend software development, • Experience with backend development, focusing on API development, cloud infrastructure, data security, and system reliability, • Experience at both big tech (e.g., FAANG) and early stage start-ups, • Experience in Golang, Node.js, TypeScript, REST APIs, Firebase/Firestore, Cloud Run, Google Cloud Platform, Zod/schema validation, Pulumi, • Experience working at both big tech (e.g., FAANG) and high-growth startups, • Proven track record of building backend infrastructure and frontend experiences., • Experience with observability and monitoring tools. What you'll do: • Design and implement scalable backend services, APIs, and data pipelines that power our patient and therapist-facing applications., • Build and maintain cloud infrastructure on GCP., • Ensure HIPAA compliance across all services, implementing proper PHI handling, audit trails, and security controls., • Create robust, well-documented REST APIs with proper validation, error handling, and monitoring., • Implement logging, monitoring, and alerting to ensure system health and quickly diagnose issues., • Work closely with Frontend, Product, and Clinical teams to define technical requirements and deliver integrated solutions. Tech stack Golang, Node.js, Cloud Run, TypeScript, Firebase/Firestore, Google Cloud Platform, REST APIs, Zod/schema validation

Project Manager - Construction Design - Albany, NY US-NY-Albany Job ID: 2026-3339 of Openings: 1 Category: Construction Management LiRo-Hill Overview LiRo-Hill is seeking an experienced Project Manager to monitor Preconstruction Design Processes for our client Office of General Services for NYS (OGS) Come join the LiRo-Hill Team! We are looking to build services and capabilities through the growth of our key asset- our staff. Ranked among the nation's top A/E firms by Engineering News-Record, LiRo-Hill provides construction management, engineering, environmental, architectural, and program management solutions. You can become part of an organization that has a strong track record and is looking to strengthen relationships and capabilities to be a trusted resource for our clients in the public and private sector. We are proud to be known as an “Integrated Construction, Design and Technology Solutions” firm and we have delivered on that label time and again. Recently, Global Infrastructure Solutions Inc. (GISI), the parent company of The LiRo Group and Hill International, Inc. consolidated a portion of the highly experienced staff of both LiRo and Hill in the Northeast to create a larger, more efficient, and cost-effective team to serve clients. LiRo-Hill is a 1100-person firm with offices in NYC, Long Island, Buffalo, Rochester, Boston and Edison, NJ. Responsibilities Primary Responsibilities Manage and monitor design projects being executed by outside consultants, ensuring adherence to scope, schedule, and quality standards. • Serve as the primary point of contact between the Division, state agency clients, and design consultants throughout the pre-construction phase., • Review and evaluate consultant submissions at key phase milestones (Program, Interim, 100%, Bid/Advertisement) for completeness and technical adequacy., • Identify and communicate scope changes, schedule slippage, and quality deficiencies; coordinate corrective action with consultants and unit management., • Maintain accurate project records in the Division’s project management system, ensuring forecast dates, phase statuses, and milestone records are current., • Participate in field trips, site visits, and coordination meetings with agency clients as required., • Support constructability and estimate check reviews during the design phase., • Conduct Bluebeam Revu Studio Sessions to manage design review comment delivery and resolution tracking., • Assist in preparing project correspondence, scope documents, consultant contract actions, and internal reporting as directed., • Collaborate across the Division’s business units and contribute to consistent project delivery practices. Qualifications What We’re Looking For Education & Experience Candidates must possess one of the following: • Bachelor’s degree in Architecture, Engineering (Structural, Civil/Site, or MEP), Construction Management, or a closely related field, plus a minimum of 4 years of relevant professional experience; OR, • Associate’s degree or professional certification in a related discipline plus a minimum of 6 years of relevant professional experience; OR, • Project Management Professional (PMP) certification with a minimum of 4 years of relevant professional experience in a design or construction environment. Knowledge, Skills & Abilities • Demonstrated ability to manage design projects or programs involving multiple disciplines (Architecture, Structural, Civil/Site, and/or MEP)., • Working knowledge of standard design and construction processes, project phases, and document deliverables., • Strong organizational and time management skills with the ability to manage multiple concurrent projects and competing priorities., • Effective written and verbal communication skills, including the ability to produce clear project correspondence and reports., • Ability to work collaboratively within a team environment and coordinate across multiple stakeholders including agency clients, consultants, and Division staff., • Proficiency in Microsoft Office Suite (Word, Excel, Outlook, Teams).Familiarity with Bluebeam Revu for document review and markup management. Preferred Qualifications • Professional Engineer (PE) or Registered Architect (RA) licensure (not required; preferred but not a substitute for the listed experience)., • Experience working within a public sector, government agency, or institutional owner’s project management environment., • Familiarity with New York State procurement, contracting, or capital programming processes., • Experience using project management or scheduling software (e.g., Oracle Unifier, Primavera P6, or equivalent).Prior experience managing design consultants and administering professional service contracts. Liro-Hill Culture: We believe in the power of collaboration. We work hard to build a corporate culture that empowers all our employees to freely share their ideas, know their presence, and contributions are truly valued, fostering a climate where our employees are enabled to maximize their full potential. • We offer a comprehensive benefits package including health insurance, vision, dental, 401K, and an ESOP employee stock ownership program., • Compensation range Min: $110,000 to $130,000, • The range provided is the salary that the Firm in good faith believes at the time of this posting is willing to pay for the advertised position. Exact compensation will be determined on the individual candidate's qualifications and location, • The selected candidate must be authorized to work in the United States; Visa sponsorship is not available for this role. LiRo-Hill is an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to age, race, color, creed, religion, national origin, ancestry, marital status, sex, affectional or sexual orientation, gender identity or expression, or protected veteran status; and will not be discriminated against on the basis of disability. #ID22 #ZR22 #LI-CM1 Compensation details: 110000-130000 Yearly Salary PIf8cc144f1b0e-37820-40455979

Project Manager - Job Order Contracting (JOC) Albany US-NY-Albany Job ID: 2026-3334 of Openings: 1 Category: Construction Management LiRo-Hill Overview We have an immediate need for two to three Project Managers for positions within the Job Order Contracts (JOC) group. Come join our team! We are looking to build services and capabilities through the growth of our key asset- our staff. Ranked among the nation's top A/E firms by Engineering News-Record, LiRo-Hill provides construction management, engineering, environmental, architectural, and program management solutions. You can become part of an organization that has a strong track record and is looking to strengthen relationships and capabilities to be a trusted resource for our clients in the public and private sector. We are proud to be known as an “Integrated Construction, Design and Technology Solutions” firm and we have delivered on that label time and again. Recently, Global Infrastructure Solutions Inc. (GISI), the parent company of The LiRo Group and Hill International, Inc. consolidated a portion of the highly experienced staff of both LiRo and Hill in the Northeast to create a larger, more efficient, and cost-effective team to serve clients. LiRo-Hill is a 1100-person firm with offices in NYC, Long Island, Buffalo, Rochester, Boston and Metro Park, NJ. The client for this project is for JOC Project Managers is NYS Office of General Services (OGS) Responsibilities The JOC program delivers construction work across New York State facilities through competitively awarded, unit-price-based contracts. Incumbents will be responsible for managing individual job order contract projects from work order development through construction completion, with a strong emphasis on developing scopes of work, contractor work order review, and cost estimating. Primary Responsibilities Scope Development, Work Order Review & Estimating • Develop a scope of work for the contractor utilizing design drawings, specifications, and site observations., • Review and evaluate contractor-submitted work orders for scope accuracy, unit price applicability, and overall cost reasonableness., • Perform independent cost estimates and quantity take-offs to validate contractor pricing against the applicable unit price book (UPB)., • Identify pricing discrepancies, non-pre-priced items, or unsupported line items and negotiate resolutions with the contractor prior to work order authorization., • Ensure that proposed work order scopes align with the underlying JOC contract terms, agency-approved project scope, and applicable code requirements., • Maintain familiarity with RSMeans or equivalent estimating references as benchmarks for cost validation. Project Management & Construction Oversight • Manage multiple concurrent JOC project work orders across various agency facilities, maintaining current schedule, cost, and status records in the Division’s project management system., • Conduct site visits as needed to confirm changes in scope., • Coordinate with state agency clients on project priorities, access requirements, phasing, and occupancy constraints., • Assist engineer in charge with review and process of contractor pay applications, verifying percent-complete against field observations and approved work order scope., • Identify and document scope changes, unforeseen conditions, and contractor performance issues; coordinate corrective actions with JOC contractor and unit management., • Track work order schedules and flag delinquencies; escalate delays or cost overruns to the unit manager with documented rationale., • Prepare project correspondence, work order authorizations, and internal status updates as required., • Support close-out activities including final inspections, punch list resolution, and final payment processing. Coordination & Communication • Serve as the primary point of contact between the Division, JOC contractors, and agency facility staff on assigned work orders., • Participate in pre-construction meetings, progress meetings, and site walk-throughs with contractors and agency clients., • Collaborate with Division staff across business units to ensure consistent delivery standards and share lessons learned from JOC project execution. Qualifications Minimum Qualifications Education & Experience Candidates must possess one of the following: • Bachelor’s degree in Civil/Site Engineering, MEP Engineering, Construction Management, Estimating, or a closely related field, plus a minimum of 3 years of relevant professional experience in construction project management or cost estimating; OR, • Associate’s degree or professional certification in a related discipline plus a minimum of 6 years of relevant professional experience in construction execution, estimating, or owner’s representation; OR, • Project Management Professional (PMP) or Certified Professional Estimator (CPE) certification with a minimum of 4 years of relevant professional experience in a construction or capital project environment. Knowledge, Skills & Abilities • Demonstrated ability to read, interpret, and evaluate construction documents, including drawings, specifications, and unit-price-based work orders., • Strong knowledge of construction estimating principles, quantity take-off methods, and cost validation techniques., • Familiarity with unit price book (UPB) construction contracts and the mechanics of job order contracting delivery methods., • Understanding of architectural, MEP, and/or civil/site construction systems sufficient to assess scope accuracy and identify pricing gaps., • Strong organizational skills with the ability to manage a high volume of concurrent work orders at varying stages of development and execution., • Effective written and verbal communication skills for contractor negotiations, agency coordination, and internal reporting., • Proficiency in Microsoft Office Suite (Word, Excel, Outlook, Teams)., • Familiarity with Bluebeam Revu for document review and markup management., • Knowledge of construction scheduling and project management or scheduling software (e.g., Oracle Unifier, Primavera P6, or equivalent). Preferred Qualifications • Direct experience working with Job Order Contracting (JOC) programs, including work order development, UPB pricing, and contractor negotiations., • Experience using RSMeans, Gordian, or equivalent cost estimating references for independent cost validation., • Prior experience as an owner’s representative or construction manager on public sector or institutional capital projects., • Familiarity with New York State procurement regulations, prevailing wage requirements, or public works construction contracting. Compensation: Minimum: $100,000yr. Max: $130,000 yr. The compensation range provided is the salary that the Firm in good faith believes at the time of this posting is willing to pay for the advertised position. Liro-Hill is committed to your success, and we invest in your growth and development to unlock your full potential. • Competitive Total Compensation Package, • Employee- Only Stock Purchase Plan, • Mentoring programs, • Continuing Education Program, • Employee referral bonus, • Volunteer/Industry association opportunities The selected candidate must be authorized to work in the United States; Visa sponsorship is not available for this role. LiRo-Hill is an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to age, race, color, creed, religion, national origin, ancestry, marital status, sex, affectional or sexual orientation, gender identity or expression, or protected veteran status; and will not be discriminated against on the basis of disability. #ID22 #ZR22 #LI-CM1 • Please visit our website for all of our career opportunities at _ Compensation details: 100000-130000 Yearly Salary PI21e3eff2a2d3-37820-40435297

A career in transportation is more than bridges, roads, and rail. As we plan, design, and manage projects that move people and goods from Point A to Point B, we create connections that transform our communities. Every airport, road, bridge, port, or transit project is an opportunity to make communities safer, cleaner, and more resilient. Together, we're making an impact around the world. If you're looking for a career that moves, join our team of professionals who are passionate about the future of transportation. Your Opportunity Stantec's Upstate New York Transportation group has an immediate need for talented, team focused Civil Engineer EITs with 0-3 years of experience in specialty areas including roadway/highway design, traffic control & construction staging design, right-of-way engineering, access design, and utility engineering. The position is for our Albany, NY office. This position is for individuals looking to challenge themselves on a professional level on a variety of transportation projects ranging from local roads and complete streets to major interstates to shared use paths and trails. You will have the opportunity to learn, work on exciting and multi-faceted projects, and grow your career. We are looking for Civil Designers who excel in working in a team environment and have a passion for the work that they do. Your Key Responsibilities - Use knowledge of general concepts of engineering elements through investigation and analysis, to support engineering projects that focus on transportation systems such as highways, streets, drainage structures, utilities, traffic signals and roadway lighting. - Perform basic calculations to analyze and design engineering system components using company standard software and proprietary manufacturer software. - Assist team in preparing engineering designs, drawings, specifications, presentations and reports, and gather information to support design decisions - Assist in basic interpretation and verify compliance with applicable codes and engineering standards and practices - Work with other engineering disciplines and professionals in the coordination of the project under the direction of a senior engineer. - Assists the team in providing support services during construction that can include submittal reviews, responses to requests for information and contract document clarifications. - Perform field work related to construction related activities as required. - Perform other duties as assigned by senior engineering staff. Your Capabilities and Credentials - Basic understanding of general concepts of relevant areas of civil design. - Basic understanding of MicroStation, In Roads, Open Roads Designer, and/or AutoCAD Civil 3D with experience a plus. - Proficient in Microsoft (MS) Office Suite. - Excellent written and verbal communication skills. - Developing cooperative skills in working efficiently with a team. Education and Experience - Civil engineering technician/technology diploma from a recognized community or technical college or the ability to demonstrate sufficient knowledge received from previous experience. - 0 to 3 years of experience in engineering consulting or construction industry. Typical office environment working with computers and remaining sedentary for long periods of time. Field work may include exposure to the elements including inclement weather. This description is not a comprehensive listing of activities, duties or responsibilities that may be required of the employee and other duties, responsibilities and activities may be assigned or may be changed at any time with or without notice. About Stantec Stantec is a global leader in sustainable engineering, architecture, and environmental consulting. The diverse perspectives of our partners and interested parties drive us to think beyond what's previously been done on critical issues like climate change, digital transformation, and future-proofing our cities and infrastructure. We innovate at the intersection of community, creativity, and client relationships to advance communities everywhere, so that together we can redefine what's possible. Pay Range: - Locations in MN, OH, VT, & Various CA, NY Areas - Min Salary $ 67,800.00 - Max Salary $ 94,900.00 Pay Transparency: In compliance with pay transparency laws, pay ranges are provided for positions in locations where required. Please note, the final agreed upon compensation is based on individual education, qualifications, experience, and work location. At Stantec certain roles are bonus eligible. Actual compensation for part-time roles will be pro-rated based on the agreed number of working hours per week. Benefits Summary: Regular full-time and part-time employees (working at least 20 hours per week) have access to medical, dental, and vision plans, a wellness program, health saving accounts, flexible spending accounts, 401(k) plan, employee stock purchase program, life and accidental death & dismemberment (AD&D) insurance, short-term/long-term disability plans, emergency travel benefits, tuition reimbursement, professional membership fee coverage and paid family leave. Regular full-time and part-time employees will receive ten paid holidays in each calendar year. In addition, employees will be eligible to accrue vacation between 10 and 20 days per year and eligible for paid sick leave (and if more generous, in accordance with state and local law). Temporary/casual employees have access to 401(k) plans, employee stock purchase program, and paid leave, in accordance with state and local law. The benefits information listed above may not apply to union positions because benefits for such positions are governed by applicable collective bargaining agreements Primary Location: United States | NY | Albany Organization: 1928 Transpt-US Northeast-Albany NY Employee Status: Regular Business Justification: New Position Travel: Yes Schedule: Full time Job Posting: 04/11/2025 08:11:25 Req ID: 1002892 Stantec provides equal employment opportunities to all qualified employees and applicants for future and current employment and prohibit discrimination on the grounds of race, colour, religion, sex, national origin, age, marital status, genetic information, disability, sexual orientation, gender identity or gender expression. We prohibit discrimination in decisions concerning recruitment, hiring, referral, promotion, compensation, fringe benefits, job training, terminations or any other condition of employment. Stantec is in compliance with laws and regulations and ensures equitable opportunities in all aspects of employment. At Stantec we are committed to ensuring our recruitment process is accessible to all. If you require reasonable adjustments to be made during the recruitment process then please inform a member of our Talent Acquisition team.

A career in transportation is more than bridges, roads, and rail. As we plan, design, and manage projects that move people and goods from Point A to Point B, we create connections that transform our communities. Every airport, road, bridge, port, or transit project is an opportunity to make communities safer, cleaner, and more resilient. Together, we're making an impact around the world. If you're looking for a career that moves, join our team of professionals who are passionate about the future of transportation. Your Opportunity Stantec's Upstate New York Transportation group has an immediate need for talented, team focused Civil Engineer EITs with 0-3 years of experience in specialty areas including roadway/highway design, traffic control & construction staging design, right-of-way engineering, access design, and utility engineering. The position is for our Albany, NY office. This position is for individuals looking to challenge themselves on a professional level on a variety of transportation projects ranging from local roads and complete streets to major interstates to shared use paths and trails. You will have the opportunity to learn, work on exciting and multi-faceted projects, and grow your career. We are looking for Civil Designers who excel in working in a team environment and have a passion for the work that they do. Your Key Responsibilities Use knowledge of general concepts of engineering elements through investigation and analysis, to support engineering projects that focus on transportation systems such as highways, streets, drainage structures, utilities, traffic signals and roadway lighting. Perform basic calculations to analyze and design engineering system components using company standard software and proprietary manufacturer software. Assist team in preparing engineering designs, drawings, specifications, presentations and reports, and gather information to support design decisions Assist in basic interpretation and verify compliance with applicable codes and engineering standards and practices Work with other engineering disciplines and professionals in the coordination of the project under the direction of a senior engineer. Assists the team in providing support services during construction that can include submittal reviews, responses to requests for information and contract document clarifications. Perform field work related to construction related activities as required. Perform other duties as assigned by senior engineering staff. Your Capabilities and Credentials Basic understanding of general concepts of relevant areas of civil design. Basic understanding of MicroStation, In Roads, Open Roads Designer, and/or AutoCAD Civil 3D with experience a plus. Proficient in Microsoft (MS) Office Suite. Excellent written and verbal communication skills. Developing cooperative skills in working efficiently with a team. Education and Experience Civil engineering technician/technology diploma from a recognized community or technical college or the ability to demonstrate sufficient knowledge received from previous experience. 0 to 3 years of experience in engineering consulting or construction industry. Typical office environment working with computers and remaining sedentary for long periods of time. Field work may include exposure to the elements including inclement weather. This description is not a comprehensive listing of activities, duties or responsibilities that may be required of the employee and other duties, responsibilities and activities may be assigned or may be changed at any time with or without notice. About Stantec Stantec is a global leader in sustainable engineering, architecture, and environmental consulting. The diverse perspectives of our partners and interested parties drive us to think beyond what's previously been done on critical issues like climate change, digital transformation, and future-proofing our cities and infrastructure. We innovate at the intersection of community, creativity, and client relationships to advance communities everywhere, so that together we can redefine what's possible. Pay Range: Locations in MN, OH, VT, & Various CA, NY Areas - Min Salary $ 67,800.00 - Max Salary $ 94,900.00 Pay Transparency: In compliance with pay transparency laws, pay ranges are provided for positions in locations where required. Please note, the final agreed upon compensation is based on individual education, qualifications, experience, and work location. At Stantec certain roles are bonus eligible. Actual compensation for part-time roles will be pro-rated based on the agreed number of working hours per week. Benefits Summary: Regular full-time and part-time employees (working at least 20 hours per week) have access to medical, dental, and vision plans, a wellness program, health saving accounts, flexible spending accounts, 401(k) plan, employee stock purchase program, life and accidental death & dismemberment (AD&D) insurance, short-term/long-term disability plans, emergency travel benefits, tuition reimbursement, professional membership fee coverage and paid family leave. Regular full-time and part-time employees will receive ten paid holidays in each calendar year. In addition, employees will be eligible to accrue vacation between 10 and 20 days per year and eligible for paid sick leave (and if more generous, in accordance with state and local law). Temporary/casual employees have access to 401(k) plans, employee stock purchase program, and paid leave, in accordance with state and local law. The benefits information listed above may not apply to union positions because benefits for such positions are governed by applicable collective bargaining agreements Primary Location: United States | NY | Albany Organization: 1928 Transpt-US Northeast-Albany NY Employee Status: Regular Business Justification: New Position Travel: Yes Schedule: Full time Job Posting: 04/11/2025 08:11:25 Req ID: 1002892 Stantec provides equal employment opportunities to all qualified employees and applicants for future and current employment and prohibit discrimination on the grounds of race, colour, religion, sex, national origin, age, marital status, genetic information, disability, sexual orientation, gender identity or gender expression. We prohibit discrimination in decisions concerning recruitment, hiring, referral, promotion, compensation, fringe benefits, job training, terminations or any other condition of employment. Stantec is in compliance with laws and regulations and ensures equitable opportunities in all aspects of employment. At Stantec we are committed to ensuring our recruitment process is accessible to all. If you require reasonable adjustments to be made during the recruitment process then please inform a member of our Talent Acquisition team.

This job opportunity is available at ANY location in the United States. Ideally, selected candidates will be near a JACOBS U.S. based office, but we intend to hire the "best" candidates. At Jacobs, we're transforming intangible ideas into innovative solutions designing the future - today. If you are someone who thrives in a fast-paced, collaborative work environment and who also enjoys working closely with clients in the Data Center market, this opportunity is for you! This is an on-site role at our Baton Rouge, LA site location. At Jacobs our wireless telecommunications project leads will work on various projects as assigned by a Manager or Lead Engineer. This position will play a role in the entire design process including but not limited to: preliminary assessments concept creation leading designs with support from your peers, SME's, and BIM designers internal and external problem resolution drawing and specification production customer and vendor accessibility. The wireless telecommunication project lead may work on several concurrent projects and will be responsible to ensure that projects are completed on time. As a wireless telecommunication project lead, you'll design and provide technical design leadership of systems for data center buildings which include Commercial DAS, Public Safety DAS, LMR, Site Radio, RoIP, Wi-Fi and Tower Studies. Responsibilities include: Designing Wireless systems in iBwave and EDX. Coordination with BIM designers to create drawing packages Coordination with AHJ's, Radio System Owners, and the Carriers. DIV 27 specification creation, or modification. conducting site visits reviewing technical documents Managing the relationship with internal and external stakeholders. Technical or associate's degree from an accredited institution Minimum 5 years' experience actively designing wireless telecommunications systems. These systems Include: LMR 2-way radio, which includes outdoor LMR, Site Radio, and RoIP systems. Public Safety DAS systems Commercial DAS systems, which include: OTA DAS, Neutral Host DAS DRAN DAS Minimum 5 years' experience with iBwave, EDX, Atoll, LMR Planner or a combination of 5 years' experience with different modeling programs. Experience working with clients to help them identify their wireless communications needs. Experience with troubleshooting wireless communication system issues from field teams. Experience with understanding Noise Floor, SNIR, Return Loss, and VSWR. Experience with optimizing networks in the design and during installation. Thorough knowledge of NFPA 72, NFPA 1221, and NFPA 1225 Thorough knowledge of IFC section 510 Thorough Knowledge of Carrier KPI's knowledge of IBC Knowledge of FCC part 20 and part 90 Knowledge of FCC OET bulletin 65. Knowledge of MOTOTRBO systems Knowledge of Motorola R56 installation standards Knowledge of DMR Tier III Familiarity working with Navisworks Self-motivation to coordinate with other disciplines, project managers and clients Excellent project management skills. Familiarity with responding to RFP's Experienced in creating a budget for a project. Experienced in creating and maintaining a project schedule Experienced in identifying and mitigating company risk iBwave Level 2 Certification required Ideally, You'll Also Have: Experience designing Wi-Fi systems EDX or Motorola design certifications FCC GROL NICET Design Certification Multiple OEM product certifications Electrical Engineering degree, or Communication Engineering Degree EIT or PE Jacobs is an Equal Opportunity/Affirmative Action Employer. All qualified applicants will receive consideration for employment without regard to race, religion, creed, color, national origin, ancestry, sex (including pregnancy, childbirth, breastfeeding, or medical conditions related to pregnancy, childbirth, or breastfeeding), age, medical condition, marital or domestic partner status, sexual orientation, gender, gender identity, gender expression and transgender status, mental disability or physical disability, genetic information, military or veteran status, citizenship, low-income status or any other status or characteristic protected by applicable law. Learn more about your rights under Federal EEO laws and supplemental language.

Join Us: Advance Modern Mobility as a Senior Traffic Engineer - Building Smarter Traffic & ITS Networks Are you a senior traffic engineer motivated by complex challenges, emerging technologies, and the opportunity to influence how transportation systems evolve? Do you enjoy tackling complex transportation problems and turning analysis, design, and technology into real‑world mobility improvements? CHA Consulting, Inc. is seeking a Senior Traffic Engineer to join our Traffic & ITS Team in New York City, NY; Albany, NY; Parsippany, NJ; Syracuse, NY; or Buffalo, NY. In this senior role, you will serve as a trusted technical leader across traffic engineering, operations, and ITS programs-contributing to innovative projects that support safer, more efficient, and more connected transportation networks. This position offers the opportunity to shape technical direction, elevate project delivery, and play a key role in developing the next generation of transportation engineering talent. This position offers fully remote capabilities; however, candidates must reside within the local area to support in-person client visits and occasional on-site responsibilities as needed. What You'll Do: Serve as the senior technical lead and primary point of contact for complex transportation engineering assignments, ensuring high-quality delivery and client satisfaction Perform and oversee advanced traffic engineering analyses, including traffic operations studies, forecasting, simulation, trip assignment modeling, and multimodal (transit, pedestrian, and non-vehicular) analyses Lead large-scale transportation studies and redevelopment efforts, coordinating with internal teams, external consultants, and public agencies Support airport roadway and frontage analyses, corridor studies, and network-level evaluations Guide and mentor junior engineering staff, including providing technical oversight and QA/QC review Support proposal development, client presentations, and technical discussions with clients, public stakeholders, and regulatory agencies What You Bring: Bachelor's Degree in Civil Engineering required; Master's degree preferred Minimum of 10 years progressive traffic engineering experience required Professional Engineer (PE) license required Professional Traffic Operations Engineer (PTOE) preferred Experience in transportation planning, design, and implementation Expert knowledge of the traffic engineering principles, operations analysis, and safety with a proven ability to apply best practices Advanced proficiency with engineering, computational, and modeling software (AutoCAD, MicroStation, etc.) as well as Microsoft Office Experience with SYNCHRO and HCS required; VISSIM and Viswalk preferred Strong understanding of QA/QC procedures, engineering standards, and applicable regulations Demonstrated leadership and mentoring skills with the ability to work effectively in a collaborative environment Excellent verbal and written communication skills Participation in professional engineering societies/organizations (ITE, ASCE, etc.) preferred Why You'll Love It Here: Serve as a technical leader on high‑impact Traffic & ITS projects that improve safety, mobility, and system performance Mentor and develop the next generation of traffic engineering professionals * Collaborate with talented teams in a flexible, supportive work environment Curious about the impactful work our Traffic & ITS team is delivering across busy corridors and complex urban environments? Discover how CHA is tackling congestion, enhancing safety, and leveraging technology to create smarter transportation systems by visiting: chasolutions.com/solutions/transportation/. Salary Range: $120,000 - $140,000 Salary is based on a variety of factors, including, but not limited to, qualifications, experience, education, licenses, specialty, training, and fair market evaluation based on industry standards. Culture/EEO Statement: At CHA, we work every day to create solutions, help people, and improve our world, committed to creating and fostering excellence in our diverse and highly talented teams. Our teams continually strive to find better ways - always searching, never settling - to achieve extraordinary results. Our values around hiring, training, and community engagement reflect a company culture that is inclusive and forward leaning, always pushing the limits of what is possible. We as an organization celebrate the values of inclusion and equality, and advocate for the full participation of all people in an environment free of discrimination. To support these values, we invite all qualified applicants to be considered for employment regardless of race, color, religion, sex, sexual orientation, gender identity, national origin, citizenship, age, disability, protected veteran status, or any other characteristic protected by law. #LI-VF1 #LI-Remote

Description GPI seeks a full-time Senior Traffic Engineer for our growing Albany Office. This position provides the flexibility to be involved in public and private development projects with diverse work from Traffic Studies and Signal Designs to Pedestrian Safety, Multi-modal Operations, and Roadway Lighting Design. The immediate role will require the candidate to prepare traffic studies and/or designs with minimal guidance and to collaborate effectively with other staff members to produce quality deliverables for our clients. The ideal candidate for this position will be able to transition into leading the office's traffic group in the coming years. Do you value a company that puts employee satisfaction at the forefront of who they are? If so, GPI wants you! GPI is a multi-discipline engineering firm providing planning, design, and construction services for transportation infrastructure and building system projects throughout the United States for over 50 years. Ranked in the Top 100 Firms by Engineering News Record, GPI is a forward-thinking, innovative firm with a culture committed to excellence and fosters staff empowerment. For more information, visit: www.gpinet.com What You'll Be Doing: • Performing technical traffic analyses and preparing technical studies., • Leading challenging and varying projects, • Mentoring junior staff, • Communicating with clients and local and state agencies and attending public hearings, • Managing project scopes, schedules, and budgets, • Assisting with writing contracts and reviewing invoices, • Ensuring the technical accuracy, standard engineering practices, and inclusion of appropriate documentation on various project plans, reports, and design documents What You Need: • BS in Civil Engineering or a related field, • 8 + years of experience in traffic engineering with both private and public clients, • Experience with project management, • Communication skills for public hearings and working with public agencies, • A PE license is required, • PTOE Certification is a plus, • Knowledge of traffic analysis software applications (Synchro/SimTraffic and HCS) Requirements MINIMUM REQUIREMENTS: • Maintain a valid driver's license with a clean motor vehicle report (MVR) for final consideration, • Read, write, and understand plans and directions given in the English language, • Basic computer skills with the ability to create and edit Microsoft Word and Excel documents, create Outlook emails and utilize SharePoint and Microsoft Teams to communicate with other team members, • Able to wear GPI required PPE, i.e., hard hats, safety vest, work boots, and/or safety glasses/goggles while working

Job Description We are currently hiring a Mechanical Engineer in our Building Engineering Division at our Albany, NY or Poughkeepsie, NY Office. The Building Engineering Division at LaBella provides complete building engineering services including mechanical, electrical, plumbing, and structural engineering. Services range from feasibility studies and analysis through project design and construction. Our engineers are well versed in new construction, renovations, additions, analysis, special structures, and design/build projects for a variety of clients. The Mechanical Engineer will work with engineers as part of a project team to provide HVAC, plumbing, and fire protection designs, studies and technical support as required to fulfill project requirements. Typical projects will involve field work, design, and construction administration services. A successful candidate will be able to work well in a team to develop concepts, strategies, designs, drawings, specifications and reports for Building and Renovation projects. Responsibilities • System selection and calculations for design purposes, • Conduct field work to document existing conditions, • Work with Jr Engineers to develop drawings with building modeling software, • Work independently and as part of a team to complete project designs, • Construction phase services such as submittal review and site visits to monitor project progress Requirements • 4 – 6 years of experience working at an A/E consulting firm is preferred, • Bachelor’s degree in Mechanical Engineering is preferred, • Well rounded experience in HVAC, plumbing, and fire protection, • Experience with Revit or AutoCAD is preferred, • Field experience is preferred, • New York State Professional Engineer’s license is a plus, • Ability to work well with a team and good analytical skills Salary Range: ($70,000 - $90,000) The specific salary offered may be influenced by a variety of factors including but not limited to the candidate's relevant experience, education, and work location. Benefits Body, mind, and wallet—LaBella’s benefits support a holistic approach to your health and wellness, creating the foundation for physical, mental, and financial well-being. Our benefit offerings cover the must-haves (healthcare and retirement), the just-in-cases (insurances and employee assistance programs), and the cherry-on-tops (fitness reimbursements, year-end incentive pay, and tuition assistance). Visit our website for more details on benefits listed below. • Flexible Work Schedule, • Health/Dental Insurance, • 401k Plan with Employer Match, • Paid Parental Leave, • Short & Long Term Disability, • Profit Sharing, • Paid Time Off, • Leadership Development Program, • Fitness Reimbursement, • Tuition Reimbursement, • Referral Bonus Program, • Wellness Program, • Team Building Events, • Community Service Events LaBella is committed to facilitating a culture where diversity, equity, and inclusion are respected, valued, and celebrated by implementing thoughtful, practical, and innovative strategies that support our employees and serve the communities in which we reside. All applicants will be considered for employment without regard to race, color, religion, age, national origin, ancestry, ethnicity, gender (including pregnancy, childbirth, breastfeeding or other related medical conditions), gender identity, gender expression, sexual orientation, marital status, veteran status, disability, genetic information, citizenship status, characteristic or membership in any other group protected by federal, state or local laws. LaBella Associates does not accept unsolicited resumes from recruiting professionals or agencies, nor do we accept resumes from any source that does not reference a specific, open position. LaBella Associates will not be responsible for any fees arising from the use of resume submitted by recruiting professionals or agencies that do not have a current placement fee agreement with LaBella Associates. All initial communication with recruiting professionals or agencies must go through human resources.

Job DescriptionSalary: $75,000-$95,000 Per Year About the Role The Highway Engineer Position will work with our clients and the highway team leader to design and detail plans on a variety of Local, State and County highways. There will be opportunities to engage projects at all stages of design and construction including feasibility and preliminary design where design decisions and input are invaluable, roadway design including alignments and superelevation, grading, drainage design, work zone traffic control, traffic signals, signage and pavement markings, pavement cross sections, permitting, bidding, and construction administration. Our team offers a hardworking, dynamic environment, with a focus on balancing employee work-life balance and long-term individual growth. Opportunities for growth within our company are available based on performance, communication skills and teamwork capabilities. Key Responsibilities • Apply broad knowledge of engineering principles and practices.Evaluate, select and adapt standard techniques, procedures and criteria to solve technical issues., • Prepare basic and advanced engineering designs and/or technical data for completion and accuracy., • Provide advanced judgement and analysis techniques to prepare complete project documents including design reports and final plan sets, • Perform engineering quantity takeoffs and create construction costs estimates., • Assist with proposal development for professional services., • Perform field investigations/site visits as needed and prepare reports., • Interpret and follow scopes of work, budgets, and schedules, completing projects within budget and on time., • Analyze and interpret data, formulate and solve problems, • Coordinate with other team members to ensure project success., • Design complete projects, systems, components or processes., • Demonstrate knowledge of standards including MUTCD, AASHTO and NYSDOT. This position is open to the following office locations; please indicate which office you would prefer when filling out an application: • Binghamton, NY, • Horseheads, NY, • Rochester, NY Qualifications • Bachelors Degree in Civil Engineering required, • Minimum four (4) years experience in highway/roadway design, preferably with EIT, PE is a plus, • Strong knowledge and experience in local and state highway/roadway design, pavement design, drainage system evaluation, intersection design, turning lane warrants, maintenance/ protection of traffic plans, and NYSDOT specifications/ details., • Knowledge of NYSDOT highway design manual and specifications, • Microstation and/or Open Roads Designer experience a must, • Traffic analysis and studies experience and signal design experience a plus, • Good technical writing and communication skills, • Knowledge in plan and specification preparation, • Self-motivated, organized, and open to learning new and innovative design procedures and methods Benefits • Holidays, • PTO, • Health Insurance, • FSA/ HSA, • Life Insurance, • 401(K) plan, • Continuing Education Support About HUNT HUNT is a full-service A/E Firm with offices located in Albany, NY, Binghamton, NY, Horseheads, NY, Rochester, NY, Towanda, PA, and Williamsport, PA. As a firm, our vision is to build vibrant communities by empowering creativity and partnership. We have accomplished this to date by being an entrusted partner to our clients/communities, providing full-service design that is innovative, practical and community focused. In addition, we offer a family friendly, flexible workplace that aims to encourage long, successful, sustainable careers through a variety of life stages. We are excited to welcome you to apply to this strong culture and hope that your values align with those of the firm, which will further enhance our culture even as we look toward targeted growth opportunities. HUNT is an Equal Opportunity Employer (EOE). Salary commensurate with experience and qualifications.

Job Description Software Used: MS Office 365, SharePoint Hardware Used: PC Summary: NYSDOH needs temporary contractual services to support the Early Intervention Program with the Early Intervention Data System. This application is used to address the Early Intervention Program's (EIP's) functions of child referral and intake, case management, developmental evaluations, service planning, service delivery, service providers claiming, provider application and approval, reporting, auditing, and compliance with federal and State requirements. The individual in this position will primarily be responsible for normal BA related tasks, as well as testing the Program's data system. The testing effort will require analysis of business requirements. There will also be numerous deliverables that will need to be tested comparing current and new system functionality. Additional Security Requirements: The consultant will be required to undergo a background check. The paperwork must be submitted immediately upon job acceptance and a start date cannot be selected until all required submissions are accepted. The consultant will need a NYS Driver's License or Non-Driver ID to gain access to the building. Special instructions will be provided to candidates who do not have such an ID. Training Details: The NYS Office of Employee Relations (OER) sets mandatory training requirements that must be completed by all employees and consultants on an annual basis. Program staff will provide a Data confidentiality presentation prior to the consultant gaining access to the system. There may be additional Department of Health (DOH) training required. Knowledge Transfer Requirement: Consultant will provide written documentation (including step-by-step instructions) and work with state staff to transfer knowledge gained to state and contract staff prior to departure. Consultant will prepare documentation and conduct formal/informal training sessions for effective transfer of knowledge in the areas needed for on-going support of the project. Periodic mentoring/training sessions may also be required for effective knowledge transfers. Consultant may need to define/document guidelines/standards with the team and share examples. Consultant may share knowledge via peer review and critique. OGS HBITS Determination: Analyzes an organization or business domain (real or hypothetical) and documents its business or processes or systems, assessing the business model or its integration with technology with distinct deliverables to a solution. Position Skill Level Requirement: 7+ Years: Candidate is able to provide guidance to large teams and/or has extensive industry experience and is considered at the top of his/her field. Day-to-Day Tasks: • Facilitate the elicitation, validation, prioritization and documentation of requirements., • Translate complex business/program terminology, concepts and issues in terms understandable to technical and non-technical management staff., • Translate requirements into test plans and scripts and trace the fulfillment of requirements through the testing phases., • Develop and execute test plans, including test cases for application changes, application software releases, and system updates., • Support User Acceptance Testing for the Early Intervention data system., • Work with the NYSDOH third-party vendor to develop new/maintain existing documents related to the EI Data system., • Attend and participate in meetings., • Prepare a weekly report., • Complete NYS LATS timecard daily. Requested Qualifications: • 7 Years experience working as a primary or lead business analyst., • 7 Years experience creating test plans, test reports, and defect management using industry-standard tools to identify, document, communicate, prioritize, track and resolve problems., • 5 Years experience with analysis and documentation of business processes by describing relevant factors including workflow processes, data input/output activities, and descriptions of data elements., • 5 Years of experience with eliciting, validating, and documenting, business-approved functional and non-functional business requirements for use by the technology team., • 4 Years of experience planning, designing, developing, and executing test strategies., • 4 Years of experience translating and documenting technical information for business/program consumption to ensure consistency and common understanding across the stakeholder groups., • 3 Years of experience with determining business requirement priorities among diverse internal and external stakeholders., • 3 Years experience as a systems analyst, software engineer, and/or developer., • Candidate is a certified Business Analyst or Quality Assurance Tester., • Candidate has a bachelor's degree in an IT related field.

Job DescriptionCloud Engineer (AWS)Employment Type: Full-Time, Experienced Department: Information technology We are seeking a Cloud Engineer (AWS) who will be responsible for supporting the development of all required documentation necessary to support the engineering, security, and operational processes for a large federal agency. The ideal candidate will possess a strong grasp of cloud computing SaaS, PaaS, and IaaS fundamentals. CGS brings motivated, highly skilled, and creative people together to solve the government’s most dynamic problems with cutting-edge technology. To carry out our mission, we are seeking candidates who are excited to contribute to government innovation, appreciate collaboration, and can anticipate the needs of others. Here at CGS, we offer an environment in which our employees feel supported, and we encourage professional growth through various learning opportunities. Skills and attributes for success:- Design solutions that ensure maximum flexibility and scalability, while meeting all required security controls.- Support the development of all required documentation necessary to support the engineering, security, and operational processes. - Perform business and technical alternative analysis for any/all aspects of the solution, aiding the customer is making decisions along the way. - Facilitate the transition of the solution to operations, initially and ongoing ensuring at all times the system is operating within the anticipated operating boundaries. - Strong grasp of cloud computing SaaS, PaaS and IaaS fundamentals with experience designing and implementing solutions. Qualifications:- Bachelor's Degree in Computer Science, Engineering, or other Engineering or Technical discipline or equivalent relevant experience - At least four (4-7) years of professional IT experience performing duties in support of federal government agencies. - 4+ years design, implementation and/or support of highly distributed applications demonstrating strong architectural skills to ensure availability, reliability, etc. - Hands-on experience with AWS (Required) or other cloud services reinforced with architectural design experience - Experience designing and delivering large-scale solutions, most of which that have advanced to the production state. - Strong grasp of cloud computing SaaS, PaaS and IaaS fundamentals with experience designing and implementing solutions. Develop cloud base solution designs and implementation plans based on customer needs - Familiar with lift-and-shift migrations and migration methodologies for cloud migration- Experience in Cloud computing, Networking, Storage, and Identity Management AWS Certification or Cloud Architect Certification (or desire to obtain certification) Ideally, you will also have:- Hands-on experience with AWS (required) or other cloud services reinforced with architectural design experience designing and delivering large-scale solutions, most of which that have advanced to the production state. - Develop cloud base solution designs and implementation plans based on customer needs - Familiar with lift-and-shift migrations and migration methodologies for cloud migration - Experience in Cloud Compute, Networking, Storage, and Identity Management AWS Certification or Cloud Architect Certification (or desire to obtain certification) Our Commitment:Contact Government Services (CGS) strives to simplify and enhance government bureaucracy through the optimization of human, technical, and financial resources. We combine cutting-edge technology with world-class personnel to deliver customized solutions that fit our client’s specific needs. We are committed to solving the most challenging and dynamic problems.For the past seven years, we’ve been growing our government-contracting portfolio, and along the way, we’ve created valuable partnerships by demonstrating a commitment to honesty, professionalism, and quality work. Here at CGS we value honesty through hard work and self-awareness, professionalism in all we do, and to deliver the best quality to our consumers mending those relations for years to come. We care about our employees. Therefore, we offer a comprehensive benefits package.- Health, Dental, and Vision- Life Insurance- 401k- Flexible Spending Account (Health, Dependent Care, and Commuter)- Paid Time Off and Observance of State/Federal Holidays Contact Government Services, LLC is an Equal Opportunity Employer. Applicants will be considered without regard to their race, color, religion, sex, sexual orientation, gender identity, national origin, disability, or status as a protected veteran. Join our team and become part of government innovation!Explore additional job opportunities with CGS on our Job Board:https://cgsfederal.com/join-our-team/For more information about CGS please visit: https://www.cgsfederal.com or contact:Email: info@cgsfederal.com #CJ We may use artificial intelligence (AI) tools to support parts of the hiring process, such as reviewing applications, analyzing resumes, or assessing responses. These tools assist our recruitment team but do not replace human judgment. Final hiring decisions are ultimately made by humans. If you would like more information about how your data is processed, please contact us.

Job Description At E Tech Group, joining our team means joining a group of passionate and forward-thinking experts. We're one of the largest engineering and system integration firms in the United States providing value for our clients through IT automation and control solutions for more than 30 years to the Life Sciences, Mission Critical, Metals & Mining, Warehousing & Distribution, and CPG/Food & Beverage industries. Our national and global scale allows us to help our clients develop and implement standardized solutions at any of their facilities regardless of physical location or the local resources available at that site. The Senior Controls / Automation Engineer role requires an individual have a diverse engineering skill set with the ability to work independently to perform all aspects of process automation engineering and system integration, including initial concepts, specifications, design engineering, documentation, project implementation, testing, startup, and training of operating and maintenance personnel. You will be a key member of a diverse team of professionals developing solutions for our client's most complex automation challenges. Location: Hybrid with local driving travel You will: • Lead or work on a project team responsible for the design, configuration, and testing of continuous and batch control applications., • Understand the project scope and financials and exercise good time management skills to plan & coordinate the work as part of a project team by developing project schedules and budgets in collaboration with project leadership and identify change orders and justify changes to Project Management ensuring completion of all project deliverables to the satisfaction of the client., • Anticipate and provide solutions to project leadership and/or customer giving high priority to customer satisfaction offering strong technical expertise and advisement as part of the project team., • Adapt to a flexible work schedule & travel, if necessary, to participate in the design, development, and start-up of control systems at the client's facility., • Act as an automation Subject Matter Expert, • Be an ambassador who embodies our Core Values, prioritizing the success of E Tech Group, our clients, and the professional development of our associates. You have: • Hands on experience executing automation projects for process plants, minimum of 3-5 years in industry, preferably in Life Sciences domain., • BS Engineering degree or equivalent educational background, • Detail oriented with strong technical aptitude and desire for learning new technologies, • Knowledge of industry and regulatory standards, design criteria and codes relevant to Instrumentation and Controls, • ISA S88 Batch standard, • ISA S95 Controls System Architecture standard, • GAMP 5 & cGMP, • 21 CFR Part 11, • Demonstrated ability to develop process control system applications, utilizing Programmable Logic Controllers (PLC), Human Machine Interfaces (HMI), and Supervisory Control and Data Acquisition (SCADA) Systems, configuration of thin client server applications, design, developing & maintaining databases for data collection, configuring process historians and using reporting tools to present process data to operations & management, tuning control loops, providing control system startup services, troubleshooting existing control systems and providing control system qualifications., • Solid understanding of object-oriented software development & delivery methodologies, • Expertise with the design, implementation, maintenance and troubleshooting of virtual server-based control system architectures, and understanding of control system network topology, i.e. Ethernet, Ethernet/IP, ControlNet, DeviceNet, etc., • Knowledge of process instrumentation specification, installation & troubleshooting, and control panel design, check-out, commissioning & troubleshooting, • Hands-on experience rapidly troubleshooting and solving equipment & instrument-related issues during start-up and commissioning and perform complex system testing, • Experience working at customer sites supporting the installation & commissioning of equipment and systems., • A DNA comprised of collaboration and teamwork. We are seeking Application Knowledge in: • PLC Programming with Rockwell Studio5000, RSLogix5000, • Ability to program in RLL, SFC and ST, • HMI Programming using one or more of Rockwell FTView ME and SE, Wonderware System Platform, Inductive Automation Ignition, • Configuration & use of one or more of Wonderware DAS/OI Server, FactoryTalk Gateway, RSLinx, RSNetWorx, KepServerEx, • Configuration & development of one or both of Wonderware InBatch & Rockwell FTBatch, • Configuration & development using one or more of Wonderware Historian, FTHistorian, OSI PI, • Use of SQL for database creation, query & management.Ability to develop stored procedures, functions & views and use of SQL commands for integration of control systems to back-end databases. Familiarity with SSRS for reporting, • Configure & operate Allen Bradley PowerFlex Drives via manual HIM or through PLC programming, • Configuration, use & troubleshooting of Allen Bradley Stratix switches, • Experience programming various other control systems is desired (i.e., GE Fanuc, Siemens, DeltaV, Honeywell DCS, GE iFix) Benefits & Perks: • 401k + match + prompt enrollment. E Tech Group employees are 100% vested upon entry., • Prompt enrollment into Medical, Dental, and Vision benefits., • Generous paid time off that includes paid vacation, paid holidays, paid family leave and sick time off., • Learning and growth are key parts of the E Tech culture. We provide you with training and continuing education from day one, so you can advance your career. As an E Tech associate, you can unlock your greatest potential through challenges and opportunities. E Tech Group is an Equal Opportunity / Affirmative Action Employer. Applicants are considered for employment without regard to race, color, religion, sex, age, disability, military status, genetic information, gender identity, sexual orientation, citizenship status, or any other basis prohibited by law. E Tech Group will provide reasonable accommodations to qualified individuals with disabilities and for religious beliefs.

Job Description this is only for US Citizens and GC Job Summary We are seeking a Junior Validation Engineer to support validation, qualification, and calibration activities within a pharmaceutical manufacturing environment. This is an excellent opportunity for candidates with 1–2 years of experience in validation, CQV, or regulated industries who are looking to grow their career in pharmaceutical manufacturing and compliance. Responsibilities • Support equipment validation, qualification, and calibration activities, • Assist with execution of IQ/OQ/PQ protocols and validation documentation, • Ensure compliance with GMP and 21 CFR Part 11 requirements, • Support Computerized System Validation (CSV) activities, • Assist in validation of autoclaves, CIP skids, isolators, parts washers, and other manufacturing equipment, • Collaborate with Quality, Manufacturing, and Engineering teams to resolve validation issues, • Maintain accurate documentation and support audit readiness Qualifications • 1–2 years of experience in Validation, CQV, Calibration, or CSV, • Basic understanding of GMP and pharmaceutical compliance requirements, • Familiarity with IQ/OQ/PQ documentation and validation lifecycle, • Pharmaceutical, biotech, or regulated industry experience preferred, • Strong communication and problem-solving skills, • Bachelor’s degree in Engineering, Life Sciences, or related field preferred Location: Albany, NY

Job DescriptionSenior Veritas Enterprise Vault Engineer Employment Type: Full-Time, Executive-LevelDepartment: Legal CGS is seeking a dedicated Senior Veritas Enterprise Vault Engineer to join a fast-paced and hard-working team to assist with any legal accounts. As a Veritas Enterprise Vault Engineer, you will play a key role in supporting various aspects of the company's portfolio. CGS brings motivated, highly skilled, and creative people together to solve the government’s most dynamic problems with cutting-edge technology. To carry out our mission, we are seeking candidates who are excited to contribute to government innovation, appreciate collaboration, and can anticipate the needs of others. Here at CGS, we offer an environment in which our employees feel supported, and we encourage professional growth through various learning opportunities. Skills and attributes for success:The Enterprise Vault is hosted on physical and virtualized Windows Servers and therefore requires the Contractor to provide a wide range of support tasks including but not limited to: - Contractor shall participate in teleconferences or technical meetings to review, educate, and support program objectives; - Contractor shall perform configurations, maintenance, monitoring, and troubleshooting using current engineering documentation; - Contractor shall record configurations change requests through the established change control board; - Contractor shall process storage requests, migrations and decommission tasks; - Contractor shall monitor failed system components and coordinate logistics, vendor support, and site support as needed; - Contractor shall respond to monitoring alerts and warnings with prompt corrective actions and escalations; - Contractor shall complete all scheduled maintenance in accordance with established policies and procedures; - Contractor shall prevent data loss or storage system outages by exercising a high level of attention to detail during maintenance; - Contractor shall manage technology in remote environments; - Contractor shall review and process tickets related to supported system according to the established service level agreements tracked within the service manager database; - Contractor shall provide initial response, Level 1 and Level 2 escalation for outages; - Contractor shall schedule maintenance actions in a timely manner; - Contractor shall create Power Shell and VBS scripts as needed to automate routine maintenance tasks; - Contractor shall facilitate the migration of system into cloud infrastructure; - Contractor shall perform daily system monitoring, verifying the integrity and availability of all hardware, server resources, and systems; - Contractor shall review system and application logs to verify completion of scheduled jobs such as backups; - Contractor shall apply OS patches and upgrades on a regular basis; upgrade administrative tools and utilities; upgrade end user applications; - Contractor shall configure / add new services as necessary; - Contractor shall research and recommend innovative, and where possible automated approaches for system administration tasks; - Contractor shall prepare and review technical assessments to include required tasks, estimated time frames, and effort for any scope project; - Contractor shall provide before/ or after core hour work as required. Our Commitment:Contact Government Services (CGS) strives to simplify and enhance government bureaucracy through the optimization of human, technical, and financial resources. We combine cutting-edge technology with world-class personnel to deliver customized solutions that fit our client’s specific needs. We are committed to solving the most challenging and dynamic problems. For the past seven years, we’ve been growing our government-contracting portfolio, and along the way, we’ve created valuable partnerships by demonstrating a commitment to honesty, professionalism, and quality work.Here at CGS we value honesty through hard work and self-awareness, professionalism in all we do, and to deliver the best quality to our consumers mending those relations for years to come. We care about our employees. Therefore, we offer a comprehensive benefits package.- Health, Dental, and Vision- Life Insurance- 401k- Flexible Spending Account (Health, Dependent Care, and Commuter)- Paid Time Off and Observance of State/Federal Holidays Contact Government Services, LLC is an Equal Opportunity Employer. Applicants will be considered without regard to their race, color, religion, sex, sexual orientation, gender identity, national origin, disability, or status as a protected veteran. Join our team and become part of government innovation!Explore additional job opportunities with CGS on our Job Board:https://cgsfederal.com/join-our-team/For more information about CGS please visit: https://www.cgsfederal.com or contact:Phone: +1 (888) 680-5916Email: info@cgsfederal.com #CJ We may use artificial intelligence (AI) tools to support parts of the hiring process, such as reviewing applications, analyzing resumes, or assessing responses. These tools assist our recruitment team but do not replace human judgment. Final hiring decisions are ultimately made by humans. If you would like more information about how your data is processed, please contact us.

Job Description We are currently looking for a Power Systems Engineer with a minimum of 5 years of experience in protection and control system design, power system analysis, cost estimating, and bidding document preparation for commercial, industrial, generation and renewables. Typical system voltage levels range from 138 kV to 2.4kV. This position can be filled in any of our New York offices. The Building Engineering Division at LaBella provides complete building engineering services including mechanical, electrical, plumbing, and structural engineering. Services range from feasibility studies and analysis through project design and construction. Our engineers are well versed in new construction, renovations, additions, analysis, special structures, and design/build projects for a variety of clients. This role can accelerate your career goals through immediate opportunities to lead, and comes with a competitive starting salary, incentive compensation, a comprehensive benefit package, and opportunities to become a LaBella shareholder. Duties • Design projects working directly with clients to develop project scope, identify problems, and propose solutions., • Typical requirements include Protection and Control drawings and documentations (relay one-lines, three-lines, AC/DC schematics, I/O lists, and relay settings, configuration files and etc), panel construction specifications (panel and interconnect wiring as well as panel layouts and elevations), and other supporting documentation., • Comfortable evaluating the interoperability, control features, and communication/protocol aspects of protective relays, RTU’s, LTC Controllers, and other equipment as well as perform power system load flow studies, fault studies, relay setting coordination., • Aid in commissioning as needed pertaining to system startups and functional checks. Requirements • A BS in Electrical Engineering or Electrical Engineering Technology., • 5 or more years of experience in protection and control system design, cost estimating, and bidding document preparation for electrical transmission and distribution substations projects., • A PE license from a US State is desired but not required., • Successful track record designing Protection and Control Systems and performing power system studies., • Knowledge of Institute of Electrical and Electronic Engineers (IEEE), NERC, NEC, NESC, NEMA, and ANSI standards are used in designing substation is critical., • Experience with telecommunications, protective relaying, and automation (SCADA) is required., • Interest in low voltage coordination and arc flash studies., • Familiarity with Schweitzer Engineering, General Electric and Basler equipment. Salary Range: $90,000 - $135,000 per year The specific salary offered may be influenced by a variety of factors including but not limited to the candidate's relevant experience, education, and work location. Benefits Body, mind, and wallet—LaBella’s benefits support a holistic approach to your health and wellness, creating the foundation for physical, mental, and financial well-being. Our benefit offerings cover the must-haves (healthcare and retirement), the just-in-cases (insurances and employee assistance programs), and the cherry-on-tops (fitness reimbursements, year-end incentive pay, and tuition assistance). Visit our website for more details on benefits listed below. • Flexible Work Schedule, • Health/Dental Insurance, • 401k Plan with Employer Match, • Paid Parental Leave, • Short & Long Term Disability, • Profit Sharing, • Paid Time Off, • Leadership Development Program, • Fitness Reimbursement, • Tuition Reimbursement, • Referral Bonus Program, • Wellness Program, • Team Building Events, • Community Service Events LaBella is committed to facilitating a culture where diversity, equity, and inclusion are respected, valued, and celebrated by implementing thoughtful, practical, and innovative strategies that support our employees and serve the communities in which we reside. All applicants will be considered for employment without regard to race, color, religion, age, national origin, ancestry, ethnicity, gender (including pregnancy, childbirth, breastfeeding or other related medical conditions), gender identity, gender expression, sexual orientation, marital status, veteran status, disability, genetic information, citizenship status, characteristic or membership in any other group protected by federal, state or local laws. LaBella Associates does not accept unsolicited resumes from recruiting professionals or agencies, nor do we accept resumes from any source that does not reference a specific, open position. LaBella Associates will not be responsible for any fees arising from the use of resume submitted by recruiting professionals or agencies that do not have a current placement fee agreement with LaBella Associates. All initial communication with recruiting professionals or agencies must go through human resources.

Job Description Hours: (full-time, 40 hrs/wk) M-Th, 8 am – 5 pm | Fr, 8 am – 2:30 pm (regular OT expected including weekends as needed) Location: This position is located in Albany, NY – onsite work is required Pay Range: $65,000-$85,000/Year About Digifabshop & CWK Associates Digifabshop & CWK Associates are pioneering firms at the forefront of digitally intensive custom architectural fabrication. We specialize in bringing one-of-a-kind projects to life, embracing complex geometric, fabrication, and logistical challenges to create what has never been built before. Our work leverages advanced algorithms and robotics to create structures with precision and efficiency. See our groundbreaking work here: https://www.cwkeller.com/ https://digifabshop.com/ The Buyer at Digifabshop/CWKA works with Project Management, Operations, Finance and Leadership Teams to provide a broad spectrum of support in the daily execution of project-specific purchasing and management of vendor relationships. Duties and Responsibilities: The Buyer attends the Biweekly Project Meeting to gain a thorough understanding of the scope of work, schedule and materials & services needed to complete the project. The Buyer works directly with the Project Manager and Lead Engineer to identify material budgets, specifications and lead times on specialty and large purchases. Material Research - Understand, evaluate, and analyze specifications and requirements for custom items and commodity bids to determine the optimal method of procurement; consult with internal Teams on what and how the product is being used. Help expand our supplier base and build a knowledge of available materials that the vendors offer. (This allows us to consider all available material options, while comparing pricing, evaluating payment term options, and determining best lead-time/availability. Review pending orders with project teams and provide suggestions for finding alternative products to those originally suggested, that may be priced better/have better availability or lead times. Help negotiate with vendors for better lead-times and pricing. Track materials that are ready to be purchased via the company’s ERP system and work with project teams to understand when materials are needed in the shop for projects. Review options for sourcing these materials, while negotiating the best possible price for each order. Write purchase orders to secure materials/products in time for operations and project teams. Estimating/RFQs- Be a source for both Estimating and Project Management in terms of where to procure materials, which vendors have exceeded our expectations on price, quality, and schedule. Submit requests for quotes for materials and supplies to obtain the best pricing and lead times. Retain quotes for negotiating later when releasing purchase orders for active projects. Purchasing- Actively participate in a project handoff meeting with Project Management to understand the materials needed, review schedule, budget, and establish guidelines for the purchasing of project materials. Understand what purchases require more information and how to pull this information together to complete the buyout package. This could include drawings, custom specifications, and previous quotes for reference. Build and maintain good vendor relationships, establishing fluid communication – responding promptly to vendor emails and calls. Onboard new suppliers, which includes negotiating payment terms, insurance requirements and lien waivers as needed. Accurately create Purchase Orders that clearly identify the items or services that are being purchased. (All pertinent information should be on the PO for clear communication to both the vendor and internal teams.) Accurately code the line items into Epicor and execute with the selected vendor. Communicate potential material issues, both cost and schedule related to the respective team members. Meet with Operations and Project Management to discuss short- and long-term project material purchasing. Review material costs to date compared to budgets established and report progress. Prepare and execute custom material ordering, reviewing with engineering and project management for accuracy and getting all orders over $10,000 signed off by the project manager. Accounting- Establish and negotiate credit terms with vendors and work to improve our financial flexibility by negotiating better terms with our vendors. Review materials with Shipper/Receiver when they arrive, to understand what has been ordered, evaluate quality issues, react to damages or inconsistences and rectify with the vendors. Work with management and the Finance Director on vendor payment issues. Buying- Work with multiple vendors to ensure pricing accuracy. Negotiate shipping costs and determine what will work for our schedule. Understanding material needs, availability and presenting alternates when product is not available. Request, collect and organize documentation for LEED projects. (Understand what qualifies for credits and follow up for the proper paperwork with vendors prior to entering their invoice.) Maintain FSC material recordkeeping. Overall: Keep a positive attitude even when things do not go as planned. Quality control check all documentation incoming and outgoing. Maintain clear communication with everyone including expectations and accountability. Know the status of pending orders, track the progress, and relay information to the team to keep everyone informed of status. Preferred skills/qualifications: Millwork/Construction Industry knowledge and work experience. Previous Project Management and/or Project Buying experience. Proven success in Negotiating Payment terms, pricing, and better lead-times. Experience working in an ERP System. (CWKA uses Epicor ERP) Epicor experience a plus. Experience working in a fast-paced, challenging environment. Able to hold vendors accountable to product availability, pricing, and payment terms. Able to work with multiple adjacent teams, including Finance/Operations, Project Management, Receiving, and Engineering, while also being able to work independently as needed. Successful in completing tasks by established deadline. Experience: Project Management: 1 year (Preferred) Project Buying: 2 years (Required) Commercial construction: 2 years (Required) ERP systems: 1 year (Preferred) Digifabshop is an equal opportunity employer committed to creating a diverse workforce. We consider all qualified applicants without regard to race, color, religion, sex, age, national origin, disability, marital or domestic violence victim status, sexual orientation, gender identity, transgender status, genetic predisposition or carrier status, military or veteran status, familial status, prior arrest or conviction record, pregnancy or related conditions, known relation or association with any member of a protected class, or any other protected class, or any other protected characteristic as established by federal or state law. Digifabshop will make reasonable accommodations for known physical or mental limitations of otherwise qualified employees and applicants with disabilities unless the accommodation would impose an undue hardship on the operation of our business. Powered by JazzHR 3n3INQRbpO

Job DescriptionJob Description Summary: The Fiber Design Technician (FDT) is responsible for management and implementation of technical OSP and ISP into FirstLight's GIS Platform. The Fiber Design Technician (FDT) will be responsible for creating construction prints, splice plans, providing support to field teams and ensuring as-built data is accurately entered. The Fiber Design Technician (FDT) is required to adhere to the Firstlight standards. Working with and communicating clearly with various departments is a priority. The Fiber Design Technicians (FDT) will be part of an on-call rotation to support the NOC and Fiber Construction Engineers during outages. Responsibilities: • Participate in large project kick-off meetings with project stakeholders., • Attending scheduled construction meetings to update, identify and prioritize jobs ready for the fiber design phase of a project., • Work in tandem with the Fiber Construction Engineers for uniformity and precision in all project documentation., • Ensure Fiber Design Management and Project Managers are promptly updated on any issues that may affect project timelines or budgets., • Design optimal and efficient fiber backbone routes per customer specifications within task forecasted date., • Digitizes lines and elements in current mapping software according to Firstlight standards., • Produce standardized and consistent construction prints and splice plans., • Update the initial designs, in the mapping system, from the as built construction data provided by the Fiber Construction Engineers., • Ability to train users on new and existing procedures and systems., • Identify and communicate segments becoming fiber constrained to Fiber Design Management., • Support emergency and trouble responses related to fiber impairments as a participant in an On-Call rotation., • Work jointly with the NOC, Field Operations, and Fiber Construction to coordinate repair teams., • Ensure Service-related projects are completed on time with excellence., • Participate in continuous improvement initiatives and standard operating procedures documentation activities., • Other duties as assigned. This job description outlines the core responsibilities of the position but is not exhaustive. The Construction Engineer may be required to undertake additional duties as necessary and assigned by the company to meet the needs of the business. FirstLight reserves the right to review and make modifications and revisions to the job description as necessary. About FirstLight: FirstLight, headquartered in Albany, New York, provides fiber-optic data, Internet, data center, cloud and voice services to enterprise and carrier customers throughout the Northeast connecting more than 13,000 locations in service with more than 125,000 locations serviceable by our more than 25,000-route mile network. FirstLight offers a robust suite of advanced telecommunications products featuring a comprehensive portfolio of high bandwidth connectivity solutions including Ethernet, wavelength, and dark fiber services as well as dedicated Internet access solutions, data center, cloud and voice services. FirstLight’s clientele includes national cellular providers and wireline carriers and many leading enterprises, spanning high tech manufacturing and research, hospitals and healthcare, banking and financial, secondary education, colleges and universities, and local and state governments. FirstLight Fiber is an equal opportunity employer. In accordance with state and federal laws, FirstLight’s equal opportunity policy is that all applicants and employees are treated equally by the company with respect to employment opportunities, regardless of race, color, religion, sex, sexual orientation, disability, or veteran status or veteran disability.

Job Description At E Tech Group, joining our team means joining a group of passionate and forward-thinking experts. We're one of the largest engineering and system integration firms in the United States providing value for our clients through IT automation and control solutions for more than 30 years to the Life Sciences, Mission Critical, Metals & Mining, Warehousing & Distribution, and CPG/Food & Beverage industries. Our national and global scale allows us to help our clients develop and implement standardized solutions at any of their facilities regardless of physical location or the local resources available at that site. We are seeking recent technical graduates who want to join a leading life science automation company providing custom automation systems for the rapidly growing Biotech industry. As an Engineer I, You Will: • Design and implementation of PLC and DCS based control systems, • Work cooperatively with engineering, design, production, and field service staff, • Be responsible for aspects of project budget and schedule requirements, • Perform functional testing of electrical and control systems, • Design and configure PLC/SCADA networks, • Generate and implement test procedures, • Participate in field start-up testing of electrical and programmed control systems, including loop checks, drive setup, installation inspection, operational readiness testing, and functional acceptance testing., • Be an ambassador who embodies our Core Values, prioritizing the success of E Tech Group, our clients, and the professional development of our associates. You Have: • BS Engineering or Computer Science degree or equivalent educational background, • Ability to solve software and data communication problems, • A DNA comprised of collaboration and teamwork Benefits & Perks: • 401k + match + prompt enrollment. E Tech Group employees are 100% vested upon entry., • Prompt enrollment into Medical, Dental, and Vision benefits., • Generous paid time off that includes paid vacation, paid holidays, paid family leave and personal/sick time off., • Learning and growth are key parts of the E Tech culture. We provide you with training and continuing education from day one, so you can advance your career. As an E Tech associate, you can unlock your greatest potential through challenges and opportunities. E Tech Group is an Equal Opportunity / Affirmative Action Employer. Applicants are considered for employment without regard to race, color, religion, sex, age, disability, military status, genetic information, gender identity, sexual orientation, citizenship status, or any other basis prohibited by law. E Tech Group will provide reasonable accommodations to qualified individuals with disabilities and for religious beliefs.

Job DescriptionCloud Systems Architect Employment Type: Full-Time, Mid-levelDepartment: Information Technology We are seeking a Cloud Systems Architect with experience with cloud infrastructure to engineer and support public, private and hybrid clouds. The ideal candidate will be proficient in a variety of cloud hosts including Amazon Web Services and Microsoft Azure at a minimum. CGS brings motivated, highly skilled, and creative people together to solve the government’s most dynamic problems with cutting-edge technology. To carry out our mission, we are seeking candidates who are excited to contribute to government innovation, appreciate collaboration, and can anticipate the needs of others. Here at CGS, we offer an environment in which our employees feel supported, and we encourage professional growth through various learning opportunities. Skills and attributes for success:- The candidate will be knowledgeable of the most recent updates and developments and act as an advisor to our customer in reference to the cloud management strategies to be employed to take advantage of the benefits offered by cloud computing such as being able to function without any restrictions to the workload, initiate as many workstations as necessary per time period and pay only for what they actually use. - The candidate will also work with the IT Security team to manage and maintain cloud systems security of the data and network resources. - The candidate will also be responsible for engineering on customer premise applications and systems interconnected to cloud resources. - Designs and defines system architecture for new or existing complex computer systems. - Determines systems specifications, input/output processes, and working parameters for hardware/software compatibility and maintenance of system security. - Coordinates design of subsystems and integration of total system. Identifies, analyzes, and resolves program support deficiencies. - Develops and recommends corrective actions. - May provide technical guidance for database administrators and software developers. Qualifications:- Experience with and a complete understanding of the technology required for cloud computing.- Experience with the skills to migrate applications to the cloud.- Be able to build relationships between the customers and the team members.- The ability and the knowledge to integrate services and tools to any and all areas to be used such as networks and data processing.- The ability and the knowledge to implement security information and event management to keep the customer's assets safe.- Experience with meeting or exceeding the requirements of cloud provider service-level agreements Experience with AWS and Azure.- Knowledge of a multitude of programming languages including Python, PHP, Java, Node and Ruby on Rails.- Typically a Bachelor's Degree and 6 years work experience or equivalent experience. Our Commitment:Contact Government Services (CGS) strives to simplify and enhance government bureaucracy through the optimization of human, technical, and financial resources. We combine cutting-edge technology with world-class personnel to deliver customized solutions that fit our client’s specific needs. We are committed to solving the most challenging and dynamic problems. For the past seven years, we’ve been growing our government-contracting portfolio, and along the way, we’ve created valuable partnerships by demonstrating a commitment to honesty, professionalism, and quality work.Here at CGS we value honesty through hard work and self-awareness, professionalism in all we do, and to deliver the best quality to our consumers mending those relations for years to come. We care about our employees. Therefore, we offer a comprehensive benefits package.- Health, Dental, and Vision- Life Insurance- 401k- Flexible Spending Account (Health, Dependent Care, and Commuter)- Paid Time Off and Observance of State/Federal Holidays Contact Government Services, LLC is an Equal Opportunity Employer. Applicants will be considered without regard to their race, color, religion, sex, sexual orientation, gender identity, national origin, disability, or status as a protected veteran. Join our team and become part of government innovation! Explore additional job opportunities with CGS on our Job Board:https://cgsfederal.com/join-our-team/ For more information about CGS please visit: https://www.cgsfederal.com or contact:Email: info@cgsfederal.com #CJ We may use artificial intelligence (AI) tools to support parts of the hiring process, such as reviewing applications, analyzing resumes, or assessing responses. These tools assist our recruitment team but do not replace human judgment. Final hiring decisions are ultimately made by humans. If you would like more information about how your data is processed, please contact us.

Job Description We’re not just hiring; we are building a world better than we found it, supporting those who serve the common good, assisting those who are most vulnerable, and helping keep our communities safe. To reach this goal, we are seeking an experienced Associate Enterprise Solutions Engineer to join our Albany, New York Team. In this role, you will support the production of critical communication and life safety system designs in K-12 schools and healthcare facilities aligned with customer needs and Company business strategy under the guidance of enterprise solutions engineers. Accountabilities Include: • Support the design of Nurse Call, RTLS, Wander Management, patient information and entertainment displays, Public Address, clock, and other critical communication and life safety systems., • Assist with providing cost determinations and budget estimations., • Assist with performing needs assessments and site surveys., • Assist with reviewing bid documents and sales orders., • Collaborate with the Sales and other Company teams on sales opportunities to create quotes, proposals, bills of material, and scope of work definitions., • Assist with validation of solution requirements, quotes and Scope of Work., • Support creation and modification of applicable project drawings including floor plans, one-line, riser, and schematic wiring diagrams., • Assist with reviewing bidding documents and Requests for Proposal (RFP) including plans, specifications, and addendums to create budgetary design and proposal., • Assist with creating RFIs to address design issues identified in bid documents., • Collaborate with project management and installation teams on scheduling, project requirements, and project design, deployment, and integration challenges., • Support the installation phase of projects and ongoing service as appropriate., • Assist with producing as-built drawings for project closeout., • Assist with validating solutions and integrations in laboratory or development environments., • Adhere to company and industry standards, building codes, and best practices for system designs., • Maintain required manufacturer certifications and current knowledge of industry codes and standards, and technology business requirements, by participating in internal and manufacturer training, and self-directed research., • Perform other duties as assigned. Requirements for Success: • Associate’s degree in Electrical Technology, or vocational/military electronics training, or equivalent relevant work experience., • Working knowledge of AutoCAD or similar design software for creating and editing technical drawings a plus., • Basic math computation skills to include addition, subtraction, multiplication, division, percentages and fractions., • Computer skills to include understanding basic computer manipulation, managing computer files, word processing, using spreadsheets and databases, creating presentations, finding information, and communicating., • Professional self-starter who is reliable, flexible, proactive, resilient, organized, and punctual., • Effective use of Microsoft 365 suite of products., • Excellent written and verbal communication skills to effectively express ideas and information., • Ability to thrive both independently and in a team environment., • A high level of commitment to customer satisfaction., • Ability to follow policies, processes and procedures., • Demonstrated attention to detail and a commitment to quality of work., • Ability to maintain industry-recognized technology credentials., • Ability to occasionally work extended hours and on weekends to complete tasks., • Maintain a clean driving record. What We Do and Who We Are: Ronco is a technology company providing critical communications technology, installation, and support to the federal government, healthcare organizations and primary education institutions. Please see our website at ronco.net – Our Solutions – Managed Services to learn more about what we do. Founded in 1965, we are a third-generation family-owned and operated organization headquartered in Buffalo, New York, with multiple locations operating along the East Coast. Our footprint includes a local commitment to customers in New York, Pennsylvania, North Carolina and South Carolina. Why Choose Us: In return for your commitment and valuable contributions to the Company, Ronco offers a friendly working atmosphere, competitive compensation, and benefits (Medical, Dental, Vision, HSA, FSA, Life Insurance, Disability, Accident Insurance, Critical Illness Insurance, Hospital Indemnity Insurance, a generous 401(k) match, nine paid Holidays, Sick Pay, and Paid Time Off), on the job training, and opportunities for promotion. We also offer a flexible hybrid working model of 3 days a week in-office, and 2 days a week remote. Long Tenured: Not to brag, but our team rocks! With an average employee tenure of 11 years, our experience authenticates our capabilities. In addition, we are staffed with talented professionals who gauge their success based on our customers. And we do know how to let our hair down and have a serious bit of fun. Vendor Credentialing: This role may require you to meet vendor specific credentialing requirements to visit customer sites as a condition of your continued employment. These requirements vary based on the respective healthcare, educational, state, or federal customer and may include vaccinations, additional background checks, additional drug testing, and any other type of criteria as specified by the customer. Drug Free Workplace: Ronco is a drug-free workplace. Employment is subject to passing a drug test. Equal Opportunity Employer: Ronco is an Equal Opportunity Employer. Only resumes that include your most recent experience/position will be considered. Company DescriptionFounded in 1965, Ronco is a privately owned and operated company headquartered in Tonawanda, New York, with additional offices throughout the east coast. At Ronco, we provide integrated communications technology by installing and supporting organizations seeking to create a better-connected experience for their employees and customers. As leaders in our field, we evaluate our customer's needs and build an integrated system that meets their organization's goals. With a well-established east coast presence, we are committed to providing best-in-class service to our customers. We extend the human connection by empowering better connections.Founded in 1965, Ronco is a privately owned and operated company headquartered in Tonawanda, New York, with additional offices throughout the east coast. At Ronco, we provide integrated communications technology by installing and supporting organizations seeking to create a better-connected experience for their employees and customers. As leaders in our field, we evaluate our customer's needs and build an integrated system that meets their organization's goals. With a well-established east coast presence, we are committed to providing best-in-class service to our customers. We extend the human connection by empowering better connections.

Job DescriptionSenior Veritas eDiscovery Platform (eDP) EngineerEmployment Type: Full-Time, Executive-LevelDepartment: Legal CGS is seeking a dedicated Senior Veritas eDiscovery Platform (eDP) Engineer to join a fast-paced and hard-working team to assist with any legal accounts. As a Veritas eDiscovery Platform (eDP) Engineer, you will play a key role in supporting various aspects of the company's portfolio. CGS brings motivated, highly skilled, and creative people together to solve the government’s most dynamic problems with cutting-edge technology. To carry out our mission, we are seeking candidates who are excited to contribute to government innovation, appreciate collaboration, and can anticipate the needs of others. Here at CGS, we offer an environment in which our employees feel supported, and we encourage professional growth through various learning opportunities. Skills and attributes for success:Personnel assigned to this task must have the ability to adjust to changing priorities and work well under pressure. In addition, personnel may provide support along with OGC, to other FBI Divisions, such as CTD. At the Government’s discretion, available funding, and need this position will support Criminal Discovery Program. The Senior Veritas eDiscovery Platform is hosted on physical and virtualized Windows Servers and therefore requires the Contractor to provide a wide range of support tasks including but not limited to: - Contractor shall participate in teleconferences or technical meetings to review, educate, and support program objectives; - Contractor shall perform configurations, maintenance, monitoring, and troubleshooting using current engineering documentation; - Contractor shall record configurations change requests through the established change control board; - Contractor shall process storage requests, migrations and decommission tasks; - Contractor shall monitor failed system components and coordinate logistics, vendor support, and site support as needed;- Contractor shall respond to monitoring alerts and warnings with prompt corrective actions and escalations; - Contractor shall complete all scheduled maintenance in accordance with established policies and procedures; - Contractor shall prevent data loss or storage system outages by exercising a high level of attention to detail during maintenance; - Contractor shall manage technology in remote environments; - Contractor shall review and process tickets related to supported system according to the established service level agreements tracked within the service manager database; - Contractor shall provide initial response, Level 1 and Level 2 escalation for outages; - Contractor shall schedule maintenance actions in a timely manner; - Contractor shall create Power Shell and VBS scripts as needed to automate routine maintenance tasks; - Contractor shall perform daily system monitoring, verifying the integrity and availability of all hardware, server resources, and systems; - Contractor shall review system and application logs to verify completion of scheduled jobs such as backups; - Contractor shall apply OS patches and upgrades on a regular basis; upgrade administrative tools and utilities; upgrade end user applications; - Contractor shall configure / add new services as necessary; - Contractor Shall facilitate the migration of the system implementation into cloud infrastructures. - Contractor shall research and recommend innovative, and where possible automated approaches for system administration tasks; - Contractor shall prepare and review technical assessments to include required tasks, estimated time frames, and effort for any scope project; Our Commitment:Contact Government Services (CGS) strives to simplify and enhance government bureaucracy through the optimization of human, technical, and financial resources. We combine cutting-edge technology with world-class personnel to deliver customized solutions that fit our client’s specific needs. We are committed to solving the most challenging and dynamic problems. For the past seven years, we’ve been growing our government-contracting portfolio, and along the way, we’ve created valuable partnerships by demonstrating a commitment to honesty, professionalism, and quality work.Here at CGS we value honesty through hard work and self-awareness, professionalism in all we do, and to deliver the best quality to our consumers mending those relations for years to come. We care about our employees. Therefore, we offer a comprehensive benefits package.- Health, Dental, and Vision- Life Insurance- 401k- Flexible Spending Account (Health, Dependent Care, and Commuter)- Paid Time Off and Observance of State/Federal Holidays Contact Government Services, LLC is an Equal Opportunity Employer. Applicants will be considered without regard to their race, color, religion, sex, sexual orientation, gender identity, national origin, disability, or status as a protected veteran. Join our team and become part of government innovation!Explore additional job opportunities with CGS on our Job Board:https://cgsfederal.com/join-our-team/For more information about CGS please visit: https://www.cgsfederal.com or contact:Phone: +1 (888) 680-5916Email: info@cgsfederal.com #CJ We may use artificial intelligence (AI) tools to support parts of the hiring process, such as reviewing applications, analyzing resumes, or assessing responses. These tools assist our recruitment team but do not replace human judgment. Final hiring decisions are ultimately made by humans. If you would like more information about how your data is processed, please contact us.

Job DescriptionCloud and Storage Engineer Employment Type: Full-Time, Experienced Department: Information technology CGS is seeking a Cloud and Storage Engineer to develop and implement full-scale Storage Area Network (SAN) architecture for a large EMC-based SAN infrastructure in support of a large federal agency. The ideal candidate will be able to excel in a fast-paced environment and successfully produce standards and implementation processes for storage configuration, optimization, replication, and storage security. CGS brings motivated, highly skilled, and creative people together to solve the government’s most dynamic problems with cutting-edge technology. To carry out our mission, we are seeking candidates who are excited to contribute to government innovation, appreciate collaboration, and can anticipate the needs of others. Here at CGS, we offer an environment in which our employees feel supported, and we encourage professional growth through various learning opportunities. Skills and attributes for success:- Develops and implements full scale Storage Area Network (SAN) architecture for a large EMC-based SAN infrastructure in a multi-enterprise, complex, geographically dispersed solution; ranging from single servers to multi-tier, multi-platform solutions connected through fiber channel to multiple EMC Storage Arrays with petabytes of storage capacity. - The SAN architecture considers the following aspects relating to SAN: performance, capacity, replication, disaster recovery, backup disk storage, and backup & recovery.- Defines and sets a strategic direction for the SAN and backup environment. - Designs and implements customer storage requirements into an enterprise solution that will be developed, installed, configured, and deployed in the environment. - Provides overall storage and backup capacity planning, and utilization reporting. - Produces standards and implementation processes for storage configuration, optimization, replication, virtualization, storage security, and disaster recovery.- Troubleshoots complex SAN infrastructure issues and works with customers both internal and external to effectively resolve issues.- Reviews, plans, and participates in executing regularly scheduled maintenances and/or projects on the storage infrastructure. - Develops technical documentation, tiered storage and storage-as-a-service roadmaps, presentations, and cost models.- Responsible for managing, maintaining, and developing the SAN infrastructure as part of a team to ensure 24/7/365 uptime. - Architects and maintains private cloud environment. Professional experience with Gov Cloud (AWS, Azure, etc.) and hybrid cloud architectures desired. - Performs security related tasks which include, but are not limited to, documentation, vulnerability scan review, assessment support, patch management, and auditing as required. Qualifications:- Bachelor’s in computer science, business, or other relevant discipline.- Eight (8) years of relevant work experience may be substituted for degree requirement.- Must have significant, direct experience in Dell EMC products such as OneFile System (OneFS), MDS SAN switches, storage arrays (Unity, Isilon, VNS, and Data Domain), and RecoverPoint. Our Commitment:Contact Government Services (CGS) strives to simplify and enhance government bureaucracy through the optimization of human, technical, and financial resources. We combine cutting-edge technology with world-class personnel to deliver customized solutions that fit our client’s specific needs. We are committed to solving the most challenging and dynamic problems. For the past seven years, we’ve been growing our government-contracting portfolio, and along the way, we’ve created valuable partnerships by demonstrating a commitment to honesty, professionalism, and quality work. Here at CGS we value honesty through hard work and self-awareness, professionalism in all we do, and to deliver the best quality to our consumers mending those relations for years to come. We care about our employees. Therefore, we offer a comprehensive benefits package.- Health, Dental, and Vision- Life Insurance- 401k- Flexible Spending Account (Health, Dependent Care, and Commuter)- Paid Time Off and Observance of State/Federal Holidays Contact Government Services, LLC is an Equal Opportunity Employer. Applicants will be considered without regard to their race, color, religion, sex, sexual orientation, gender identity, national origin, disability, or status as a protected veteran. Join our team and become part of government innovation! Explore additional job opportunities with CGS on our Job Board:https://cgsfederal.com/join-our-team/ For more information about CGS please visit: https://www.cgsfederal.com or contact:Email: info@cgsfederal.com #CJ We may use artificial intelligence (AI) tools to support parts of the hiring process, such as reviewing applications, analyzing resumes, or assessing responses. These tools assist our recruitment team but do not replace human judgment. Final hiring decisions are ultimately made by humans. If you would like more information about how your data is processed, please contact us.

Job Description At E Tech Group, joining our team means joining a group of passionate and forward-thinking experts. We're one of the largest engineering and system integration firms in the United States providing value for our clients through IT automation and control solutions for more than 30 years to the Life Sciences, Mission Critical, Metals & Mining, Warehousing & Distribution, and CPG/Food & Beverage industries. Our national scale allows us to help our clients develop and implement standardized solutions at any of their facilities regardless of physical location or the local resources available at that site. We are seeking Senior Aveva PI Engineer who wants to be part of a growing business to support the design, deployment, testing, and maintenance of PI Systems. You Will: • Serve as team lead on PI System applications through installation, design, implementation and support., • Design, build, test, validate, troubleshoot and debug new and existing systems., • Commissioning of new PI systems, • Development of design documentation/testing protocols and supporting protocol executions, • Be an ambassador who embodies our Core Values, prioritizing the success of E Tech Group, our clients, and the professional development of our associates. You Have: • Bachelor's Degree in Engineering, • 5+ years of experience designing and maintaining PI Systems, • Experience integrating PI with PLC and DCS systems, • Experience in using Asset Framework to create asset models, • Experience in using PI Vision or other tools to create displays and reports for front end users to leverage the PI Data, • Experience with PI to PI and RDBMS interfaces is a plus, • Understanding of IT systems, Automation, and network infrastructures, • Understanding of Biopharmaceutical processes is a plus, • GMP and validation experience is a plus, • Knowledge of S88 Batch standards and experience implementing batch systems is a plus, • A DNA comprised of collaboration and teamwork. Benefits & Perks: • 401k + match + prompt enrollment. E Tech Group employees are 100% vested upon entry., • Prompt enrollment into Medical, Dental, and Vision benefits., • Generous paid time off that includes paid vacation, paid holidays, paid family leave and sick time off., • Learning and growth are key parts of the E Tech culture. We provide you with training and continuing education from day one, so you can advance your career. As an E Tech associate, you can unlock your greatest potential through challenges and opportunities. Salary range: 120,000 - 140,000 E Tech Group is an Equal Opportunity / Affirmative Action Employer. Applicants are considered for employment without regard to race, color, religion, sex, age, disability, military status, genetic information, gender identity, sexual orientation, citizenship status, or any other basis prohibited by law. E Tech Group will provide reasonable accommodations to qualified individuals with disabilities and for religious beliefs. #LI-SK1

Job Description Employment Type: Full-Time FSLA: Salary/Exempt Division: Project Management Department: Project Management Reports to: Senior Project Manager / Project Executive / Director, Project Executive Supervisory Duties: Yes Salary Range: $77,000 - $83,000 The Project Engineer (PE) will be primarily responsible for obtaining, distributing and reporting on critical project information to the project stakeholders. In this role, the PE will coordinate with subcontractors, vendors and consultants. The PE is the on-site expert on the status of submittals, Request for Information (RFIs), materials, safety documentation, drawing updates, and all other relevant project documents. PEs participate in the Consigli Project Engineer Academy, a year-long program designed to give our PEs a leg up in the industry through expert training and continuous development. Through this program, new PEs will gain pertinent industry knowledge and skills while also building their network within Consigli through interactive group activities. Responsibilities / Essential Functions • Document Control – Ensure timely and accurate management of all project documentation:, • Distribute all design changes/updates to the entire project team and all subcontractors., • RFIs: Prepare and submit requests for information to the design team and distribute all responses to the appropriate parties., • Submittals: Create and manage the submittal log for the project. Obtain required submittals from subcontractors, review for compliance with the specifications and submit to the design team for review via Procore system software., • Safety Documentation: Upload subcontractor safety documentation to Procore. Notify subcontractors of missing paperwork and follow up until it is provided. Conduct safety walk-throughs with Superintendent and Safety Manager., • Enrollment, and compliance tracking of subcontractor insurance certificates., • Field Reporting: Ensure field activities are tracked and reported to related parties., • Punch List: Upload and distribute the punch list through Procore to subcontractors. Assist with coordinating work completion as required and maintain an accurate log of items to be completed., • Observations and Field Reports: work with project team to conduct field walks as necessary and compile any corresponding documentation accordingly. Review Design Team field reports and work with required parties to resolve open items and drive resolution., • Safety: perform regular safety walks with field and safety staff and record observations., • Photos: track project progress with photos of the job site on a regular basis. Photos shall be tagged and uploaded to Procore., • Material Delivery: Thorough knowledge of anticipated delivery dates for materials and equipment to the site., • Create, update and maintain an accurate material delivery log for all materials and equipment on the project., • Obtain current information from subcontractors on a consistent basis regarding the status of their materials and when they are expected onsite., • Ensure timely communication of potential delays to the entire project team., • Understand and communicate long lead item impacts to the design team during the submittal review process and request expediting of submittal review where required., • Material verification on-site: confirm the delivered material corresponds to the submitted material to avoid potential field issues., • Project Meetings:, • Generate and update agendas for the various project meetings with input from the project team., • Track project meeting commitments and action items and distribute minutes to project stakeholders in a timely manner., • Reporting: report on, at a minimum, submittals, RFI’s and critical project issues., • Coordinate and support pre-job and subcontractor safety and quality meetings., • Collaboration and Coordination:, • Interface with client and design team throughout the entire project., • Develop relationships with all stakeholders on the project., • Collaborate with the other team members in establishing and implementing project goals., • Management and inventory of job site office consumables., • Communicate with subcontractors on a daily basis. Key Skills • Strong ability to work within a team environment., • Persistence and strong initiative., • Excellent organizational skills, • Time management/prioritization., • Strong communication skills (written and oral)., • Flexibility and willingness to learn., • Critical thinking and desire to solve problems. Required Experience • A bachelor's degree in engineering, Construction Management or Architecture preferred., • Prior internship experience is a plus., • Basic understanding of construction including schedule logic, budgets and project documentation., • Microsoft Office proficiency is required., • OSHA 10 Hour and OSHA 30 preferred., • Additional experience may include cost management software (Timberline, Sage preferred), scheduling software (Primavera P6 preferred) and construction management software (Procore preferred).

Job Description Overview ⚡ Lead Mixed Signal Systems Engineer – Precision Instrumentation Innovation ???? Location: Albany, NY ???? Schedule: Full-Time ???? Compensation: $130,000–$150,000 + Comprehensive Benefits ???? Engineer the Future of High-Precision Technology Are you passionate about designing ultra-precise mixed signal systems that power breakthrough technologies? Join Vitrek and become a driving force behind next-generation instrumentation used in cutting-edge industries including aerospace, semiconductor manufacturing, advanced research, defense systems, and life sciences. We’re seeking a highly skilled Lead Mixed Signal Systems Engineer to help architect sophisticated low-noise analog and digital integrated solutions that deliver world-class performance and reliability. This is a high-impact opportunity for an engineer who thrives in a collaborative, innovation-focused environment and wants to influence both new product development and long-term technology strategy. ???? Why Vitrek? At Vitrek, precision is more than a specification — it’s our mission. Through our family of industry-leading brands — Vitrek, GaGe, and MTI Instruments — we create advanced test and measurement technologies trusted by engineers and researchers worldwide. Our technologies support innovations ranging from: ✔ Life-saving vaccine development ✔ Advanced radar and aerospace systems ✔ Precision semiconductor wafer measurement ✔ High-performance manufacturing and compliance testing When you join Vitrek, you become part of a team dedicated to solving complex engineering challenges with elegant, high-performance solutions. ???? What You’ll Be Doing As a senior member of the engineering team, you’ll take ownership of mixed signal system development from concept through production. Key Responsibilities ???? Lead mixed signal and mixed-domain circuit design initiatives ???? Design low-noise, high-stability systems for precision instrumentation ???? Perform component selection, SPICE simulation, and system-level analysis ???? Develop schematics, PCB layouts, and BOM documentation ???? Conduct debugging, validation, and performance optimization ???? Support existing products and continuous product improvements ???? Collaborate closely with software and cross-functional engineering teams ???? Provide technical guidance and mentorship to junior engineers ???? Assist with application engineering and customer support when needed You’ll work directly with the Vice President of Engineering and play a critical role in shaping the future of Vitrek’s product portfolio. ???? What You BringRequired Qualifications ✔ BS or MS in Electrical Engineering from an ABET-accredited program ✔ 5+ years of hands-on mixed signal circuit design experience ✔ Strong mixed-domain design and troubleshooting expertise ✔ Experience with schematic capture, PCB layout, and circuit validation ✔ Strong understanding of low-noise design principles ✔ Eligibility to work in the United States ✔ Ability to travel occasionally (<10%, domestic and international) ⭐ Preferred Experience Experience in any of the following areas is highly valued: ???? Low-power switching inverter design (<50W) ???? Ultra-low-noise amplifier design (op-amp and discrete) ???? Audio amplifier systems ???? Active analog filter design ???? RF circuit design and testing ???? Benefits & Perks We believe exceptional engineers deserve exceptional support. Comprehensive Benefits Include: ✅ 401(k) with company match ✅ Medical, dental, and vision insurance options ✅ Employer-paid short-term disability coverage ✅ Voluntary supplemental benefits ✅ Employee Assistance Program (EAP) ✅ Paid vacation time ✅ 5 front-loaded paid sick days annually ✅ 10 paid company holidays ✅ Tuition reimbursement ✅ Continuing education and career advancement support ???? Build Technology That Matters If you’re ready to solve complex engineering challenges, contribute to groundbreaking technologies, and work alongside a team that values innovation and technical excellence — we want to hear from you. Apply today and help shape the future of precision instrumentation at Vitrek.

Job DescriptionDescription: Mayhew Technology Solutions is looking for Cleared Technology System Administrators to support a new team under our government customer in West Mifflin, PA. This individual must have an active DOE Q clearance or an active DOD Top Secret clearance at a minimum. This individual will be a full-time employee whose primary responsibility will be providing system administrative coverage for equipment and software under the guidance of the Computer Technology System Support Team (CTSS). Requirements: Hardware Maintenance: · Hardware problem diagnosis · Replacement parts and materials are provided by Technology Engineers and/or Hardware Suppliers · Replacement of hardware components under the direction of the CTSS team and the equipment's supplier (as required) Software Maintenance: · Aid engineers in software problem diagnosis. · Aid engineers in operating system problem diagnosis. · Implement solutions under the guidance of the CTSS team, engineer, and equipment supplier as required. · Provide Anti-Virus Patching Services - based on a maintenance schedule. · Provide Operating System Debug and Patching Services -with concurrence and direction from CTSS, System LOB Owner, and Equipment Supplier. Procurement, Auditing, and Documentation: · Aid engineers in purchasing new equipment using the buyer's internal required process. · Work with the CTSS team to purchase the required equipment via the buyer's internal business system or by purchasing a credit card. · Aid engineers in the completion and documentation related to the assessment process. · Aid engineers in completing any required audits for the LOB Systems. · Aid engineers in the implementation of the Continuous Monitoring (CM) process that will be implemented during the next phase of the RMF process. Miscellaneous Computer System Support · Aid engineers with general system-related issues · Aid engineers with system design questions for upgrades/ new purchases · Consult with CTSS and Engineers on new technology implementations · Other duties as assigned by the customer. Required Experience · Experience level must meet or exceed the following: Bachelor's degree in a related field from an accredited college or university and a minimum of 2 years relevant experience. · Ability to creatively solve challenging technology problems · Must be able to manage multiple tasks simultaneously, prioritize workload effectively, and thrive in a dynamic and complex environment. · Strong communicator who can work without direct supervision or detailed direction. · Active DOE Q Clearance or DOD Top Secret Clearance required. Can hold up to TS/SCI.

Job DescriptionAPEX Placement and Consulting has partnered with an exciting company in Albany, NY looking to add an Electrical Engineer to their already amazing team. Their primary responsibility will be to design and develop electrical systems and components for CNC precision machine tools and automation equipment. Keep reading for more details! What’s in it for you: • $80,000 – $110,000 salary, • Salaried position with straight time after 40 hours, • Direct hire opportunity, • Medical, Dental, and Vision benefits, • 401(k) + profit sharing, • Work with cutting-edge equipment in a growing industry, • Opportunity for career growth and development, • Occasional domestic and international travelWhat your day will look like:, • Design and document electrical systems based on machine tool standards and customer requirements, • Create electrical drawings using AutoCAD (AutoCAD Electrical preferred), • Develop and maintain bills of materials within ERP systems, • Assist with project cost estimates and ensure projects stay within budget, • Conduct electrical testing and troubleshoot equipment, • Support machine assembly, start-up, testing, and final sign-off, • Collaborate with engineering, manufacturing, purchasing, and service teams, • Identify and implement improvements to enhance performance and reduce cost/lead time, • Support service and maintenance of installed equipmentWhat we are looking for:, • Bachelor’s degree in Electrical Engineering required, • 3–5 years of experience in an industrial/manufacturing environment preferred, • Experience with electrical/electronic system design and troubleshooting, • Proficiency in AutoCAD (AutoCAD Electrical preferred), • Strong attention to detail and problem-solving skills, • Ability to manage time effectively and meet deadlines, • Strong communication skills (written and verbal), • Proficient in Microsoft Office, • Self-motivated with the ability to work independently and on a team, • High level of integrity and commitment to continuous improvementAt Apex, we actively encourage applications from underrepresented groups. If you meet most of these qualifications and are eager to learn and grow, we invite you to apply!

Job DescriptionSenior Discovery IT System AdministratorEmployment Type: Full-Time, Executive-LevelDepartment: Legal CGS is seeking a dedicated Senior Discovery IT System Administrator to join a fast-paced and hard-working team to assist with any legal accounts. As a Senior Discovery IT System Administrator, you will play a key role in supporting various aspects of the company's portfolio. CGS brings motivated, highly skilled, and creative people together to solve the government’s most dynamic problems with cutting-edge technology. To carry out our mission, we are seeking candidates who are excited to contribute to government innovation, appreciate collaboration, and can anticipate the needs of others. Here at CGS, we offer an environment in which our employees feel supported, and we encourage professional growth through various learning opportunities. Skills and attributes for success:The Contractor shall provide the following services to include but not limited to: - Contractor shall ensure the day-day availability of electronic discovery applications and related tools; - Contractor shall administer and monitor all installed systems and infrastructure, install, configure, test and maintain operating systems, application software and system management tools; - Contractor shall monitor and test application performance for potential bottlenecks, identify possible solutions, and work with vendors and developers to implement fixes; - Contractor shall maintain security, backup, and redundancy strategies; - Contractor shall assist technical architecture design discussions; - Contractor shall liaise with vendors on behalf of OGC to address product issues; - Contractor shall develop and provide training for the end-users; - Contractor shall provide general support, subject matter expertise and advice on the use of electronic discovery tools and applications; - Contractor shall reverse engineer and document the as-is architecture of existing legacy applications or systems; - Contractor shall analyze capabilities, interview and collect business requirements and translate it into technical requirements; - Contractor shall support the discovery application integration/migration activities; - Contractor shall contribute to the Knowledge Management databases by creating and improving technical knowledge articles to assist in future resolution of issues; - Contractor shall have legal technology experience and knowledge of the EDRM; - Contractor shall assist in the implementation of e-discovery tools ( i.e. Relativity, Veritas eDP, or other review platform applications hosted in the cloud environment; - Contractor shall have the skills, knowledge and abilities to support backend infrastructure, data migrations, application installation, management and configuration; - Contractor shall have the ability to install, operate, and manage Microsoft server 2019/2022 and Microsoft SQL Server 2019/2022; - Contractor shall have ability to operate, and manage cloud technologies to include Microsoft Azure, Amazon AWS, VMware, Azure servers, Azure Functions, and Azure API Gateways and/or AWS EC2 servers, AWS Lambda and AWS API Gateways; - Contractor shall have ability to operate and manage relational databases, MySQL and/or SQL Server 2012 or higher. Our Commitment:Contact Government Services (CGS) strives to simplify and enhance government bureaucracy through the optimization of human, technical, and financial resources. We combine cutting-edge technology with world-class personnel to deliver customized solutions that fit our client’s specific needs. We are committed to solving the most challenging and dynamic problems. For the past seven years, we’ve been growing our government-contracting portfolio, and along the way, we’ve created valuable partnerships by demonstrating a commitment to honesty, professionalism, and quality work.Here at CGS we value honesty through hard work and self-awareness, professionalism in all we do, and to deliver the best quality to our consumers mending those relations for years to come. We care about our employees. Therefore, we offer a comprehensive benefits package.- Health, Dental, and Vision- Life Insurance- 401k- Flexible Spending Account (Health, Dependent Care, and Commuter)- Paid Time Off and Observance of State/Federal Holidays Contact Government Services, LLC is an Equal Opportunity Employer. Applicants will be considered without regard to their race, color, religion, sex, sexual orientation, gender identity, national origin, disability, or status as a protected veteran. Join our team and become part of government innovation!Explore additional job opportunities with CGS on our Job Board:https://cgsfederal.com/join-our-team/For more information about CGS please visit: https://www.cgsfederal.com or contact:Phone: +1 (888) 680-5916Email: info@cgsfederal.com #CJ We may use artificial intelligence (AI) tools to support parts of the hiring process, such as reviewing applications, analyzing resumes, or assessing responses. These tools assist our recruitment team but do not replace human judgment. Final hiring decisions are ultimately made by humans. If you would like more information about how your data is processed, please contact us.

Job Description We are currently hiring a mid-level Mechanical Engineer in our Building Engineering Division – Energy team. LaBella’s Energy team provides comprehensive energy efficiency and renewable energy consultancy, including feasibility analyzes, design, and commissioning services. Our engineers are well-versed in all aspects of building and energy systems design relating to a variety of new construction, renovations, and design/build projects for a variety of clientele. The Mechanical Engineer will work with our engineers in a lead role on a variety of decarbonization/electrification projects to develop projects in feasibility stages all the way through design and construction. A successful candidate will be able to work well in a team, mentor junior engineers, and communicate effectively with clients. Duties • Lead design of building HVAC systems and district energy systems, • Field investigations to document existing conditions, • Selection and calculations for design purposes, • Work with Jr Engineers to develop and review project drawings and documentation, • Interact directly with clients by completing analysis of design options, cost benefit comparisons, and communicating results to assist in decision making process., • Ensure compliance with applicable codes, standards, and utility requirements Salary Range: $80,000 - $120,000 per year The specific salary offered may be influenced by a variety of factors including but not limited to the candidate's relevant experience, education, and work location. Requirements • 4-8 years of relevant experience, • Bachelor’s degree in Mechanical Engineering is preferred, • Well-rounded experience in HVAC and hydronic system design, • Designing geothermal or district energy systems experience preferred, • Experience with Revit or AutoCAD, • New York State Professional Engineer’s license is a plus, • Excellent verbal and written communication skills Benefits Body, mind, and wallet—LaBella’s benefits support a holistic approach to your health and wellness, creating the foundation for physical, mental, and financial well-being. Our benefit offerings cover the must-haves (healthcare and retirement), the just-in-cases (insurances and employee assistance programs), and the cherry-on-tops (fitness reimbursements, year-end incentive pay, and tuition assistance). Visit our website for more details on benefits listed below. • Flexible Work Schedule, • Health/Dental Insurance, • 401k Plan with Employer Match, • Paid Parental Leave, • Short & Long Term Disability, • Profit Sharing, • Paid Time Off, • Leadership Development Program, • Fitness Reimbursement, • Tuition Reimbursement, • Referral Bonus Program, • Wellness Program, • Team Building Events, • Community Service Events LaBella is committed to facilitating a culture where diversity, equity, and inclusion are respected, valued, and celebrated by implementing thoughtful, practical, and innovative strategies that support our employees and serve the communities in which we reside. All applicants will be considered for employment without regard to race, color, religion, age, national origin, ancestry, ethnicity, gender (including pregnancy, childbirth, breastfeeding or other related medical conditions), gender identity, gender expression, sexual orientation, marital status, veteran status, disability, genetic information, citizenship status, characteristic or membership in any other group protected by federal, state or local laws. LaBella Associates does not accept unsolicited resumes from recruiting professionals or agencies, nor do we accept resumes from any source that does not reference a specific, open position. LaBella Associates will not be responsible for any fees arising from the use of resume submitted by recruiting professionals or agencies that do not have a current placement fee agreement with LaBella Associates. All initial communication with recruiting professionals or agencies must go through human resources.

Job DescriptionDiscovery IT System AdministratorEmployment Type: Full-Time, Executive-LevelDepartment: Legal CGS is seeking a dedicated Discovery IT System Administrator to join a fast-paced and hard-working team to assist with any legal accounts. As a Discovery IT System Administrator, you will play a key role in supporting various aspects of the company's portfolio. CGS brings motivated, highly skilled, and creative people together to solve the government’s most dynamic problems with cutting-edge technology. To carry out our mission, we are seeking candidates who are excited to contribute to government innovation, appreciate collaboration, and can anticipate the needs of others. Here at CGS, we offer an environment in which our employees feel supported, and we encourage professional growth through various learning opportunities. Skills and attributes for success:The Contractor shall provide the following services to include but not limited to: - Contractor shall ensure the day-day availability of electronic discovery applications and related tools; - Contractor shall administer and monitor all installed systems and infrastructure, install, configure, test and maintain operating systems, application software and system management tools; - Contractor shall monitor and test application performance for potential bottlenecks, identify possible solutions, and work with vendors and developers to implement fixes; - Contractor shall maintain security, backup, and redundancy strategies; - Contractor shall assist technical architecture design discussions; - Contractor shall liaise with vendors on behalf of OGC to address product issues; - Contractor shall develop and provide training for the end-users; - Contractor shall provide general support, subject matter expertise and advice on the use of electronic discovery tools and applications; - Contractor shall reverse engineer and document the as-is architecture of existing legacy applications or systems; - Contractor shall analyze capabilities, interview and collect business requirements and translate it into technical requirements; - Contractor shall support the discovery application integration/migration activities; - Contractor shall contribute to the Knowledge Management databases by creating and improving technical knowledge articles to assist in future resolution of issues; - Contractor shall have legal technology experience and knowledge of the EDRM; - Contractor shall assist in the implementation of e-discovery tools ( i.e. Relativity, Veritas eDP, or other review platform applications hosted in the cloud environment; - Contractor shall have the skills, knowledge and abilities to support backend infrastructure, data migrations, application installation, management and configuration; - Contractor shall have the ability to install, operate, and manage Microsoft server 2019/2022 and Microsoft SQL Server 2019/2022; - Contractor shall have ability to operate, and manage cloud technologies to include Microsoft Azure, Amazon AWS, VMware, Azure servers, Azure Functions, and Azure API Gateways and/or AWS EC2 servers, AWS Lambda and AWS API Gateways; - Contractor shall have ability to operate and manage relational databases, MySQL and/or SQL Server 2012 or higher. Our Commitment:Contact Government Services (CGS) strives to simplify and enhance government bureaucracy through the optimization of human, technical, and financial resources. We combine cutting-edge technology with world-class personnel to deliver customized solutions that fit our client’s specific needs. We are committed to solving the most challenging and dynamic problems. For the past seven years, we’ve been growing our government-contracting portfolio, and along the way, we’ve created valuable partnerships by demonstrating a commitment to honesty, professionalism, and quality work.Here at CGS we value honesty through hard work and self-awareness, professionalism in all we do, and to deliver the best quality to our consumers mending those relations for years to come. We care about our employees. Therefore, we offer a comprehensive benefits package.- Health, Dental, and Vision- Life Insurance- 401k- Flexible Spending Account (Health, Dependent Care, and Commuter)- Paid Time Off and Observance of State/Federal Holidays Contact Government Services, LLC is an Equal Opportunity Employer. Applicants will be considered without regard to their race, color, religion, sex, sexual orientation, gender identity, national origin, disability, or status as a protected veteran. Join our team and become part of government innovation!Explore additional job opportunities with CGS on our Job Board:https://cgsfederal.com/join-our-team/For more information about CGS please visit: https://www.cgsfederal.com or contact:Phone: +1 (888) 680-5916Email: info@cgsfederal.com #CJ We may use artificial intelligence (AI) tools to support parts of the hiring process, such as reviewing applications, analyzing resumes, or assessing responses. These tools assist our recruitment team but do not replace human judgment. Final hiring decisions are ultimately made by humans. If you would like more information about how your data is processed, please contact us.

Job Description At E Tech Group, joining our team means joining a group of passionate and forward-thinking experts. We're one of the largest engineering and system integration firms in the United States providing value for our clients through IT automation and control solutions for more than 30 years to the Life Sciences, Mission Critical, Metals & Mining, Warehousing & Distribution, and CPG/Food & Beverage industries. Our national and global scale allows us to help our clients develop and implement standardized solutions at any of their facilities regardless of physical location or the local resources available at that site. We're adding to our team! We are seeking a Principal Engineer who has a diverse engineering skill set with the ability to work independently to perform all aspects of process automation engineering and system integration, including initial concepts, specifications, design engineering, documentation, project implementation, testing, startup, and training of operating and maintenance personnel. You will be a key member of a diverse team of professionals developing solutions for our client's most complex automation challenges. Location: Within 3 hours driving time of Albany, NY You will: • Lead a project team responsible for the design, configuration, and testing of continuous and batch control applications., • Understand the project scope and financials and exercise good time management skills to plan & coordinate the work as part of a project team., • Anticipate and provide solutions to the customer giving high priority to customer satisfaction offering strong technical expertise and advisement as part of the project team., • Adapt to a flexible work schedule & travel, if necessary, to participate in the design, development, and start-up of control systems at the client's facility., • Act as an automation Subject Matter Expert You have: • BS Engineering degree., • Hands on experience executing automation projects for process plants, minimum of 8-10 years in industry, preferably in Life Sciences domain., • GMP, controls design, and facility start-up, • Rockwell, Ignition, Servers, • Understanding of recipe development in a Batch/DCS,, • Experience programming equipment phases within ControlLogix PLCs., • Knowledge of industry and regulatory standards, design criteria and codes relevant to Instrumentation and Controls, • ISA S88 Batch standard, • ISA S95 Controls System Architecture standard, • GAMP 5 & cGMP, • 21 CFR Part 11, • Demonstrated ability to develop process control system applications, utilizing Programmable Logic Controllers (PLC), Human Machine Interfaces (HMI), and Supervisory Control and Data Acquisition (SCADA) Systems, configuration of thin client server applications, design, developing & maintaining databases for data collection, configuring process historians and using reporting tools to present process data to operations & management, tuning control loops, providing control system startup services, troubleshooting existing control systems and providing control system qualifications., • Solid understanding of object-oriented software development & delivery methodologies, • Expertise with the design, implementation, maintenance and troubleshooting of virtual server-based control system architectures, and understanding of control system network topology, i.e. Ethernet, Ethernet/IP, ControlNet, DeviceNet, etc., • Knowledge of process instrumentation specification, installation & troubleshooting, and control panel design, check-out, commissioning & troubleshooting, • Hands-on experience rapidly troubleshooting and solving equipment & instrument-related issues during start-up and commissioning and perform complex system testing, • Experience working at customer sites supporting the installation & commissioning of equipment and systems. Benefits & Perks: • 401k + match + prompt enrollment. E Tech Group employees are 100% vested upon entry., • Prompt enrollment into Medical, Dental, and Vision benefits., • Generous paid time off that includes paid vacation, paid holidays, paid family leave and sick time off., • Learning and growth are key parts of the E Tech culture. We provide you with training and continuing education from day one, so you can advance your career. As an E Tech associate, you can unlock your greatest potential through challenges and opportunities. E Tech Group is an Equal Opportunity Employer. Applicants are considered for employment without regard to race, color, religion, sex, age, disability, military status, genetic information, gender identity, sexual orientation, citizenship status, or any other basis prohibited by law. E Tech Group will provide reasonable accommodations to qualified individuals with disabilities and for religious beliefs. E Tech Group is an Affirmative Action Employer of individuals with disabilities and protected veterans.

Job DescriptionSalary: $86,773-$108,413 (EE I) or $93,659-$118,388 (EE II) The New York State Environmental Facilities Corporation (EFC), a public benefit corporation, aids local governments and other eligible applicants throughout New York State to undertake critical water quality infrastructure projects by providing access to low-cost financing capital, grants, and expert technical assistance. EFC is committed to fostering an inclusive workplace that values respect, diversity, and the unique perspectives of all individuals. To support our employees, EFC provides an outstanding benefits package similar to that offered to New York State employees. Our total compensation package includes, but is not limited to, leave benefits (Paid Parental Leave, 13 holidays and paid vacation, sick, and personal leave); a comprehensive health insurance program including medical, prescription drug, dental, and vision plans; and membership in either the NYS and Local Retirement System, which is a defined retirement plan, or the Voluntary Defined Contribution Program. Position Description Under the direction and supervision of the Unit Manager/Environmental Engineer III, the Environmental Engineer (EE) I or II is responsible for the technical engineering support for the New York Clean Water State Revolving Fund (CWSRF) Program and other funding programs administered by EFC. Primary responsibilities include the review of contracts, planning and design documents, co-funding information, and environmental review documentation from municipal applicants seeking funding for their water quality protection and wastewater treatment projects. The EE I or II applies engineering principles to establish that the submissions are consistent with applicable technical standards and State and Federal regulations. This includes issuing comments, approvals or eligibility determinations to applicants. In addition, the EE I or II acts as the engineering project manager interacting with other internal divisions and government agencies, including but not limited to close coordination with New York State Department of Environmental Conservation and the New York State Department of Health. Essential Duties • Contact and establish working relationships with municipal officials and their engineers to determine need for, and interest in, EFC assistance for water quality and water pollution control projects. Based on information obtained from municipal representatives, present project priority and eligibility for CWSRF financial assistance, and participate and present to CWSRF scoring panel., • Review and make recommendations for approval or eligibility of engineering reports, plans, specifications, change orders, and other technical documents for the planning, design, and construction of CWSRF eligible water quality protection and wastewater treatment facilities and various point, non-point, and National Estuary projects. Coordinate the review of these documents with other interested State and/or Federal agencies for conformance with applicable technical standards., • Manage multiple projects at various stages of development from concept through construction completion by providing appropriate technical and application assistance to municipal representatives. Organize and participate in conferences with potential recipients of financial assistance to discuss program requirements and policies., • Proactively maintain and update project database to reflect the current status of the project and ensure program requirements (permits, approvals, etc.) are met. Develop and maintain spreadsheets and other project documents in MS Word and Excel to monitor project status., • Visit construction sites throughout the State to monitor construction activities, including observing construction for compliance with the program requirements, securing appropriate programmatic documents, and performance of interim and final project site visits on large and complex projects. Complete reports to record observations. In addition to the above duties, EE IIs may serve as a mentor to other engineering staff (EE I) and will be assigned more complex projects and tasks, and perform tasks with greater independence than EE I. Qualifications All applicants must possess a valid New York State drivers license as travel is necessary to conduct meetings and site visits in various parts of the state. Engineers are assigned to geographically based project sections and will typically handle projects within the regional area they are assigned to. However, candidates must be willing to work in, and travel to, any part of New York State as their regional assignment may require shifting due to staffing, workload, or other considerations. EE I Minimum required qualifications include a Bachelors degree in Environmental, Civil, or Chemical Engineering and successful passage of Part 1 of the National Council of Examiners for Engineering and Surveying Fundamentals of Engineering (FE) examination. Three years of full-time wastewater related engineering experience can be substituted for the FE examination. EE II Environmental Engineer II candidates must possess a New York State Professional Engineers (PE) license and current registration; and demonstrate the experience and judgement necessary to work independently at the EE II level, as well as the ability to provide mentorship/leadership as needed. At the Corporations discretion, years of engineering experience, Professional licensure or certification (EIT/PE) and/or a masters level degree in a related field may be considered when determining salary level. Knowledge/Skills Knowledge of methods, materials and terminology used in the planning, design and construction of water quality and wastewater collection and treatment systems; including the ability to understand, interpret and analyze technical material, such as engineering reports, construction plans and specifications, contracts, technical reference materials and instructions is required. Knowledge in the following areas is desired: • Water quality and wastewater engineering, including familiarity with green stormwater practices, • Construction cost estimating and engineering economics, • Environmental permits and impact analysis, • Federal and State environmental regulations, • Energy efficiency and evaluation, • Pumps, motors, and drives, • Bidding mechanisms including requests for proposal and request for qualifications, • Contracting mechanisms including Design, Bid, Build; Energy Services Contracts (ESCO); Design-Build; and Contract Manager At-Risk (CMAR) Skill in the following areas is required: • Compiling and organizing large volumes of data and information clearly and concisely, • Management of multiple projects and strong ability to prioritize, • Strong verbal and written communication skills and an ability to interact effectively with people from diverse backgrounds in a professional manner, • Computers and applicable software (Microsoft Word and Excel), • Ability to manage multiple stakeholders with proficiency in navigating roles and responsibilities for scopes and contracts Working Conditions and Physical Abilities Work is primarily performed in an office setting, with prolonged periods of sitting and fine manipulation skills required for computer use. Application Requirements and Related Information Salary will be based on experience and qualifications, as well as market and business considerations. Employees may request to telecommute up to two days per week after the completion of their training period. In compliance with Public Law 99-603, candidates selected for appointment must provide, within three (3) business days of the employees first day of employment, an original copy of documentation proving citizenship and/or legal right to work in the United States. It is the policy of the State of New York and EFC to provide for and promote equal opportunity employment, compensation, and other terms and conditions of employment without discrimination on the basis of age, race, color, religion, physical or mental ability, national origin, gender, sexual orientation, veteran or military service member status, marital status, domestic violence victim status, genetic predisposition or carrier status, or arrest and/or criminal conviction record, unless based upon a bona fide occupational qualification or other exception. All individuals with disabilities are encouraged to apply to positions that they are qualified to perform. It is the policy of EFC to provide qualified persons with disabilities an equal opportunity to participate in and receive the benefits, services, programs, and activities of EFC, and to provide such persons with reasonable accommodations and reasonable modifications as are necessary, to enjoy such equal opportunity, including accommodations in the recruitment process. EFC will provide reasonable accommodation to ensure effective communication of information to individuals with disabilities. If you need an auxiliary aid or service to make this information available to you, please contact EFCs Human Resources Office at (518) 486-9267. It is the policy of EFC to provide reasonable accommodation for religious observers.

Job Description About Sungrow: Sungrow North America is a leading provider of renewable energy solutions, specializing in the development and manufacturing of photovoltaic inverters and energy storage systems. The company offers a comprehensive range of products and services designed to optimize the performance and efficiency of solar power installations. Sungrow North America is known for its commitment to innovation, high-quality standards, and exceptional customer service, aiming to provide sustainable and reliable energy solutions to meet the growing demand for clean power. The Position: The Electrical Engineer position is a hybrid or Onsite position depending on the department requirement, and it plays an important role with this rapidly growing company. This is a very dynamic and fast-track position reporting to the Engineering Supervisor/Manager inside the service engineering group. The position will be the key member of the service engineering team and it is a highly technical customer facing position. Essential Duties and Responsibilities: • Perform a variety of engineering assignments involving technology applications involved in the installation, operation, testing and maintenance of various solar inverters and battery storage technologies., • Perform as a lead on more complex field engineering assignments., • Interact with customers to explain the technical scope of projects., • Create and update field service procedures for troubleshooting and maintenance., • Provide training to Customers, Vendors, and Internal Personnel as a virtual team member of the training center., • Coordinate with R&D engineering in China for the generation of technical documents and training., • Responsible for the technical issues of a certain region based on the job assignment., • Lead the preparation of root cause reports to the customer., • Lead and track technical issues from customers/FST/PM/etc. on Airtable to visualize the process of the issues., • Analyze failures for trends requiring proactive actions and provide reports on findings., • Provide feedback to the R&D team on possible mechanical and electrical design improvements., • Advise, provide training on, and lead employees on various safety-related topics., • Perform electrical and electronic troubleshooting and testing of solar inverters and their components in the field or in the laboratory. Use of PQA and oscilloscope is required as needed., • Perform troubleshooting to investigate solar plant issues such as battery issues, inverter faults, inverter design issues, and utility grid transients., • Work with customer SCADA engineers to set up systems communication and parameters., • Research alternative components that can be used in the field., • Independently performs a range of field service tasks involving communication with Factory Engineering and Customer’s solar plant engineer., • Coordinate and work closely with other engineering, logistic, financial, and program management disciplines to maintain the solar/BESS plants., • Help with the repair activities in the Service center., • Prepare and submit field reports to customers and management., • Support development of technical proposals and provide comments on the technical content and level of effort of the proposed scope of work., • Conduct site visits, experimental investigations and analyze engineering problems. Propose solutions, alternatives, and provide recommendations., • Inspects working conditions to ensure all products and activities are compliant with safety guidelines., • Weekly call with Engineers from Headquarters to review the progress of the issues resolution process., • Provide details for a monthly report. Minimum Requirements: • Must possess the ability to work with test equipment and hand tools as required., • Must possess customer service, problem-solving skills, and possess decision making and analytical skills., • Must possess effective written and verbal communication skills., • Demonstrates broad knowledge of electrical and construction site safety., • Must be proficient in Microsoft Office Suite (Word, Excel, power Point and Outlook), • Must have basic knowledge of Electrical Safety Standards, • Must have a valid driver’s license with a clean driving record Education or Desired License and Certificates: • 4 years of experience in power electronics related companies as the service engineer/application engineer/R&D/Product Management or similar positions, or 2 years of experience with a Bachelor's degree or above, majoring in electrical engineering or similar majors., • Solar industry, battery industry, or power electronics experience is preferred. Competencies: • Technical problem solving/analytical skills., • Self-starter, strong initiatives, and an excellent communicator., • System and product level mindset., • Organization, detailed-oriented nature, and strong initiative., • Strong technical support focus and a service-oriented individual both with sales team and customers., • Modbus protocol knowledge is desired, but not required., • English language proficiency required., • Mandarin Chinese Proficiency desired, but not required., • Perform essential job functions using proper techniques that may include lifting, carrying, pushing, and pulling tools, equipment, and materials., • Lift and carry items weighing up to 50 pounds, with or without reasonable accommodation., • Engage in frequent standing, walking, bending, stooping, kneeling, crouching, and reaching during field assignments., • Work in a variety of field environments, including confined spaces, uneven surfaces, and varying weather conditions., • Follow all company safety policies and training requirements, including the use of personal protective equipment (PPE)., • Comprehend Job Hazard Analysis and conduct level-appropriate Job Hazard Analysis., • Designated as Authorized Person for LOTO. Travel: • 50% Work Location and Status: • Contract role, Hybrid role based out of the NY, MA, or NC areas Compensation: • Compensation commensurate with experience, • Competitive benefits package and employee programs, • Strong personal and company growth opportunities For candidates in the states of California, Colorado, New York and Washington, the anticipated annual base salary for this role is between $80,000 - $120,000 This range does not include any other compensation components or other benefits that an individual may be eligible for. The base salary offered is dependent upon several factors, including but not limited to job-related skills, qualifications, experience, education, location, or other factors related to the role. Sungrow is an equal opportunity employer. Due to strong interests in this position, Sungrow will only reach out to those candidates who best meet the requirements. Thank you for your interest in Sungrow. #LI-LV1

In this role, you won't just be maintaining systems—you will be the strategic driver behind network security, continuous improvement, and large-scale infrastructure projects. Oversee daily operations to ensure maximum availability, performance, and ironclad security. Strong commitment to security

System Engineer Job Duties: Manages and monitors all installed systems and infrastructure for the organization to be in line with company guidelines or SOP (standard operating procedure). Installs,

Staff Software Engineer Remote Job Duties: • Implement and evolve a Data Lake storage system with low latency and high throughput for bulk data ingestion and query • Implement metadata, data governance, security, and acce

A Tool Manufacturing Firm is looking for an Automation & Control Systems Engineer in Albany, NY The Automation & Control Systems Engineer will work as part of a team to create and implement control systems for any and/or all of the companies products, with an emphasis on software development. Responsibilities: • Collaborate with other engineering disciplines to establish control systems architectures and control strategies for machines, processes, and automation systems., • Plan, develop, and document software for machine control, HMI, SCADA, and other control systems., • Facilitate discussions with customers and suppliers related to control systems, interfaces, and integration., • Limited Travel Required Skills: • Bachelor of Science degree in Electrical Engineering or Computer Systems Engineering and two or more years of experience with increasing responsibility, • Experience developing control system programs for Siemens (Step 7, TIA Portal, WinCC Professional SCADA), Fanuc, or Allen Bradley PLCs, CNCs, HMIs, and Servo Drives desired, • Experience programming any of the commercial robots such as ABB, Fanuc, Kuka, etc. desired, • Proficient in National Instruments LabView desired, • A fundamental understanding of computer communications (TCP/IP, RS-232, etc.) and industrial network protocols (Profinet, Profibus, EtherNet/IP, OPC, etc.) desired, • Mechanical aptitude and ability to understand mechanical drawings, hydraulic and pneumatic schematics Benefits: Great Benefits!

Job DescriptionSalary: $75-90K cb20 is anaward-winning provider of managed IT and audio-visual services, proudly serving organizations acrossNew York, Massachusetts, and the greater New England region. With over 30 years of experience, a team of world-class engineers, and trusted partnerships with the worlds leading hardware and software providers, we deliver confidence, security, and above all "An Experience Above". cb20 won the Albany Business Review Best Places to Work and Albany Times Union Top Places to Work five years in a row. In 2025, cb20 achieved the #1 spot in the over 100 category at the ABR Best Places to Work event. People are cb20's greatest asset. As a Site Lead Support Center Engineer III, you will provide support for managed services customers. This role is responsible for providing customers with technical support, remotely and/or on-site so that they can complete core and essential duties of their roles with functional, required equipment. The candidate should be able to explain features of technical products, answer questions about installation, configuration, upgrades, customization, and usage of technical equipment. A Support Center Engineer applies basic diagnostic techniques to identify problems, investigate causes, recommend solutions to correct common failures, and escalate complex problems when required. Providing a high level of professionalism and day-to-day customer service. Responsibilities: • Acts as an incident and problem manager for major outages., • Is a technical knowledge escalation and subject matter expert point for the on-site team., • Triages and resolves high level escalated tickets., • Develops technical training and mentors on-site team for best practices of the Support Center and Managed Services., • Helps to make customer onboarding run smoothly., • Solve technically complex, strategic, high-profile, or long-running customer issues., • Assists in automation and efficiency practices for Managed Services, • Participates as an on call technical escalation point., • Assists and oversees tool development., • Oversees the customer experience feedback loop., • Participates in solutioning technology for customers that originate in the Support Center., • Works to have technology best practices in place for managed services customers that are included in their service., • Perform triaging, troubleshooting, and support to client via telephone, chat, email support, or tickets., • Document all pertinent end user information in ticketing system., • Provide support for users utilizing laptops, workstations, desktops, iOS, and Android devices., • Provide connectivity support for users devices., • Configure and install software for end user devices such as laptops, workstations, and tablets., • Support the systems and networks of customers., • Provide exemplary customer service., • Perform customer call backs as required., • Using problem-solving and people skills to ensure swift resolutions to technical issues., • Troubleshooting, and diagnosing error messages and failures., • Provide Tier 1, Tier 2, and Tier 3 support., • Ensure system backups are completed., • Create and maintain client and support documentation., • Testing, troubleshooting, and diagnosing error messages and failures., • Install, configure, maintain, and monitor Windows, Linux, VoIP, PC, Storage, Virtual, Mobile, Server, O365/M365, and Network environments., • Configure, deploy, and troubleshoot patching for devices., • Check and troubleshoot backup jobs/engines. Qualifications Requirements/Job Specifications Education: Bachelor's degree or higher in computer science or related field, OR equivalent combination of education and work experience.MCSE\MCITP certificate or equivalent knowledge. Meraki certification or equivalent knowledge. Experience: 8+ years of IT engineering experience and Windows Administration. Industry expertise with enterprise infrastructure solution development (physical computer, networking, storage, or data center concepts). Standards: Ability to follow standards as outlined in the cb20 Company Manual. Skills:Strong working experience in networking, WAN, LAN topology, and support; installing, configuring, and setting up workstations, servers, and printer. Working experience in building, troubleshooting, and maintaining VMWare and Hyper-V Virtual networks; Microsoft product portfolio; various technology OEMS. Excellent troubleshooting skills, the ability to multitask, and strong written and verbal communication skills. Working time: 40 hours/week. All other times as defined by the demands of the customers and departments needs. Lifting: Typically, no lifting more than 25 lbs.

Job DescriptionDesktop/Workstation Design EngineerEmployment Type: Full-Time, ExperiencedDepartment: Information Technology CGS is seeking an experienced Desktop/Workstation Design Engineer to participate in architecture discussions, system reviews, design planning, and technology roadmap planning for current and future desktop integration efforts. CGS brings motivated, highly skilled, and creative people together to solve the government’s most dynamic problems with cutting-edge technology. To carry out our mission, we are seeking candidates who are excited to contribute to government innovation, appreciate collaboration, and can anticipate the needs of others. Here at CGS, we offer an environment in which our employees feel supported, and we encourage professional growth through various learning opportunities. Skills and attributes for success:- Acts as the Subject Matter Expert for the development and implementation of the Desktop Operating System (OS) Images. - The candidate engineers’ robust solutions for large-scale deployment of software using OS deployment technologies such as Microsoft Endpoint Configuration Manager (MECM) and the Microsoft Deployment Toolkit (MDT). - Develops tests and implements software distribution packages, to include updates to software applications to be applied to desktops, laptops, tablets, and servers used within the enterprise. - Provides information and recommendations to meet various user-based software requirements. - Strong familiarity with scripting languages such as Powershell and VB script. - Implements server OS deployment methodologies to include automated server build processes. - Provides support for an OS patching infrastructure such as HCL BigFix or Windows Update/MECM that applies mandatory security updates to enterprise systems. - Analyzes, evaluates, and recommends desktop, laptop, tablet, and server hardware. - Performs security related tasks which include, documentation, vulnerability scan review, assessment support, patch management, and auditing as required. Qualifications:- The ideal candidate for this position will possess experience with integrating and upgrading desktops and laptops from the Windows 7 operating system to Windows 10 operating system, upgrading Microsoft and 3rd party applications, and have experience with litigating software such as Ipro and Concordance. - The ability to work independently with only minor guidance is a must. Our team is engineering a Windows 10 image on an Intel based system which will be integrated with Microsoft Exchange 2013, Microsoft Office 2013, and various 3rd party applications. · Windows OS engineering experience· Understanding of the application of security controls on the image· Microsoft Office engineering experience· Integrating anti-virus applications in an image· VPN/Remote access (Cisco Secure Access with RSA a plus)· Windows Scripting experience· Good writing skills Ideally, you will also have:- VB and/or VBA coding experience a plus· VDI/Citrix experience· SMS/SCCM experience a plus· Understanding of PKI· VMWare experience· Litigating software such as Ipro and Concordance Our Commitment:Contact Government Services (CGS) strives to simplify and enhance government bureaucracy through the optimization of human, technical, and financial resources. We combine cutting-edge technology with world-class personnel to deliver customized solutions that fit our client’s specific needs. We are committed to solving the most challenging and dynamic problems. For the past seven years, we’ve been growing our government-contracting portfolio, and along the way, we’ve created valuable partnerships by demonstrating a commitment to honesty, professionalism, and quality work. Here at CGS we value honesty through hard work and self-awareness, professionalism in all we do, and to deliver the best quality to our consumers mending those relations for years to come. We care about our employees. Therefore, we offer a comprehensive benefits package.- Health, Dental, and Vision- Life Insurance- 401k- Flexible Spending Account (Health, Dependent Care, and Commuter)- Paid Time Off and Observance of State/Federal Holidays Contact Government Services, LLC is an Equal Opportunity Employer. Applicants will be considered without regard to their race, color, religion, sex, sexual orientation, gender identity, national origin, disability, or status as a protected veteran. Join our team and become part of government innovation! Explore additional job opportunities with CGS on our Job Board:https://cgsfederal.com/join-our-team/For more information about CGS please visit: https://www.cgsfederal.com or contact:Email: info@cgsfederal.com #CJ We may use artificial intelligence (AI) tools to support parts of the hiring process, such as reviewing applications, analyzing resumes, or assessing responses. These tools assist our recruitment team but do not replace human judgment. Final hiring decisions are ultimately made by humans. If you would like more information about how your data is processed, please contact us.

Power System Studies Engineer page is loaded## Power System Studies Engineerlocations: Vaesteras, Vastmanland County, Swedentime type: Full timeposted on: Posted Todayjob requisition id: R0119476Location:Vaesteras, Vastmanland County, SwedenJob ID:R0119476Date Posted:2026-02-25**