System engineer jobs in Buffalo, New YorkCrear alertas

Job Description Job Title Senior Electrical Engineer Location Buffalo, NY or Goodyear, AZ (On-Site or Hybrid depending on program needs) Department Engineering Employment Type Full-Time | Exempt Company Overview GTI designs, engineers, and manufactures complex modular systems supporting energy storage, power generation, data center infrastructure, defense, and industrial markets. GTI delivers fully integrated, engineered-to-order solutions including Battery Energy Storage Systems (BESS), generator-backed power systems, and modular data centers manufactured in-house. Position Overview GTI is seeking a Senior Electrical Engineer to lead electrical system design and development across advanced modular programs, including BESS, GenSet-based power systems, and modular data center infrastructure. This role owns electrical architecture, schematic development, and technical execution for complex power and control systems operating across varying voltage levels and power capacities. The Senior Electrical Engineer serves as a technical authority, working closely with mechanical engineering, manufacturing, supply chain, and project teams to ensure designs are safe, scalable, manufacturable, and compliant with applicable standards. This role requires strong experience in power distribution, control systems, and electrical documentation within industrial or energy-focused environments. Key Responsibilities Electrical System Design & Architecture • Lead electrical system design for Battery Energy Storage Systems (BESS), generator systems, and modular data center power infrastructure, • Develop electrical architectures supporting varying levels of power generation, storage, and distribution, • Design AC and DC power systems, including low-voltage and medium-voltage applications as required by project scope, • Create and maintain detailed electrical schematics, wiring diagrams, and single-line diagrams using SolidWorks Electrical or equivalent, • Develop panel layouts, cable schedules, and interconnection diagrams, • Ensure electrical documentation is complete, accurate, and production-ready, • Design electrical systems integrating battery systems, inverters, transformers, generators, switchgear, and protection devices, • Support parallel operation, load sharing, and backup power configurations, • Design control and monitoring interfaces between power systems and control platforms, • Support electrical design for modular data center infrastructure including power distribution units (PDUs), UPS systems, generators, and switchgear, • Design redundant and fault-tolerant power architectures (e.g., N+1, 2N), • Partner with Mechanical Engineering to ensure electrical designs integrate with enclosures, thermal systems, and physical layouts, • Support Manufacturing Engineering with design-for-manufacturability and build strategy input, • Provide technical guidance to production teams during build, test, and integration, • Ensure designs comply with applicable electrical codes and standards such as NEC, UL, IEC, and project-specific requirements, • Support UL-listed and customer-certified system designs, • Serve as a technical lead on assigned programs, • Support project planning, technical risk identification, and issue resolution, • Bachelor’s degree in Electrical Engineering or related discipline, • 8+ years of experience in electrical engineering roles within industrial, energy, or infrastructure environments, • Strong experience designing power systems across varying voltage and power levels, • Proven experience developing electrical schematics and documentation, • Experience with power generation, energy storage, or critical power infrastructure, • Experience with Battery Energy Storage Systems (BESS), • Experience with generator systems, paralleling switchgear, and backup power architectures, • Experience supporting modular data centers or mission-critical infrastructure, • Proficiency with SolidWorks Electrical, • Experience supporting UL-listed or code-compliant system designs, • Prior experience in modular, containerized, or engineered-to-order manufacturing environments

Job Description We are currently hiring a mid-level Mechanical Engineer in our Building Engineering Division – Energy team. LaBella’s Energy team provides comprehensive energy efficiency and renewable energy consultancy, including feasibility analyzes, design, and commissioning services. Our engineers are well-versed in all aspects of building and energy systems design relating to a variety of new construction, renovations, and design/build projects for a variety of clientele. The Mechanical Engineer will work with our engineers in a lead role on a variety of decarbonization/electrification projects to develop projects in feasibility stages all the way through design and construction. A successful candidate will be able to work well in a team, mentor junior engineers, and communicate effectively with clients. Duties • Lead design of building HVAC systems and district energy systems, • Field investigations to document existing conditions, • Selection and calculations for design purposes, • Work with Jr Engineers to develop and review project drawings and documentation, • Interact directly with clients by completing analysis of design options, cost benefit comparisons, and communicating results to assist in decision making process., • Ensure compliance with applicable codes, standards, and utility requirements Salary Range: $80,000 - $120,000 per year The specific salary offered may be influenced by a variety of factors including but not limited to the candidate's relevant experience, education, and work location. Requirements • 4-8 years of relevant experience, • Bachelor’s degree in Mechanical Engineering is preferred, • Well-rounded experience in HVAC and hydronic system design, • Designing geothermal or district energy systems experience preferred, • Experience with Revit or AutoCAD, • New York State Professional Engineer’s license is a plus Body, mind, and wallet—LaBella’s benefits support a holistic approach to your health and wellness, creating the foundation for physical, mental, and financial well-being. Our benefit offerings cover the must-haves (healthcare and retirement), the just-in-cases (insurances and employee assistance programs), and the cherry-on-tops (fitness reimbursements, year-end incentive pay, and tuition assistance). Visit our website for more details on benefits listed below. • Flexible Work Schedule, • Health/Dental Insurance, • 401k Plan with Employer Match, • Short & Long Term Disability, • Profit Sharing, • Paid Time Off, • Leadership Development Program, • Fitness Reimbursement, • Tuition Reimbursement, • Referral Bonus Program, • Wellness Program, • Team Building Events, • Community Service Events

Job Description Advance your career with the Stark Tech team. We'll shape your future together! Stark Tech is a total optimization provider of facilities and energy solutions. Stark Tech leads the market in providing cutting-edge facilities and energy solutions. We integrate systems, offer energy-efficient equipment and services, and provide building analytics to help customers meet sustainability goals. Our large-scale equipment converts waste to renewable natural gas, reducing greenhouse gas emissions. Additionally, we enhance the utility grid with microgrid and battery energy storage solutions, along with solar development consulting services. Join Stark Tech to be part of the future of energy transformation. What you can expect We believe your well-being and satisfaction are vital for a fulfilling career. We are gritty, employee, and customer-focused. Here are some of the benefits we provide: • Paid Time Off & Holidays, • 401(k) with employer match, • Medical/Dental/Vision insurance, • Health Savings Account (HSA) and Flexible Spending Account (FSA), • HSA employer contribution, • Life and Disability insurance, • Wellness Program (participation incentives), • Employee Assistance Program, • Competitive pay The Senior Controls Engineer is responsible for project leadership in the conception, development, and implementation of industrial controls systems for RNG plants and related skid systems utilizing PLC's, SCADA, and HMI software to meet project and customer requirements. This includes both hardware selection and implementation and related programming. We are looking for an individual with in-depth familiarity and experience with controls, electrical power systems, field devices, operations, network configurations, and industrial communications protocols. What are we looking for • Bachelor's degree in electrical engineering or a related field required. Additional experience will be considered in lieu of degree., • 10+ years related experience in leading control system design and related hardware specification and selection., • In depth knowledge of Rockwell and/or other similar PLC platforms., • General knowledge of rotating equipment such as pumps, compressors, and motors., • Extensive knowledge of AC/DC electrical systems and components such as VFD's, power supplies, relay logic, etc., • Extensive experience leading troubleshooting, testing, and commissioning of automated machine systems, components, and electrical devices., • Detailed knowledge of NEC (National Electric Code) and other international electrical codes such as IEC and CSA., • Ability to communicate clearly and professionally with clients, suppliers, and internal team on a regular basis, both verbally and in writing., • Must be good at multi-tasking and running multiple projects in different stages of completion at once., • High organizational skills are required to maintain and track all project correspondence and documentation., • Demonstrated experience and ability to coach, mentor, and train junior engineers and colleagues. Our fast-growing organization offers competitive pay, a positive work environment, and opportunities for career growth within the company. If you're a motivated individual with a sense of accountability, resiliency, and a dedication to providing exceptional customer service, we encourage you to get in touch with us. The advertised compensation range for this position represents what we believe, at the time of posting, to be competitive and acceptable by reviewing comprehensive market data to include industry, and roles of similar responsibility and level. Within the range, wage will be determined by several factors including candidate knowledge, job-related skills, experience, and relevant education or training. Job Posted by ApplicantPro

Job Description Job Title: Welding Robotics Engineer - Automation Engineer Location: Goodyear / Phoenix, Arizona Department: Engineering Employment Type: Full-Time | On-Site FLSA Status: Exempt About GTI Energy GTI Energy, a division of GTI Fabrication, designs and builds advanced modular infrastructure for mission-critical markets, including energy storage systems, data centers, and defense applications. We are growing rapidly and investing heavily in automation to increase capacity, precision, and efficiency at our industrial fabrication facilities. Position Overview We are seeking a Welding Robotics Engineer - Automation Engineer to lead the development, deployment, and optimization of automated robotic welding systems across our production lines. This is a hands-on technical role focused on designing, programming, integrating, and maintaining robotic welding cells with PLC controls. This position will play a key role in advancing GTI’s automation strategy, ensuring our fabrication processes achieve the highest standards of safety, quality, efficiency, and scalability. Key Responsibilities Automation Applications, Strategy & CapEx Justification • Partner with operations, manufacturing engineering, and quality to identify automation use cases that improve safety, quality, and throughput., • The Welding Robotics Engineer will develop capital expenditure justifications and ROI/payback analyses to support automation project funding., • Lead cross-functional project teams (quality, safety, operations, manufacturing engineering, and facilities) assigned to automation initiatives., • Develop specifications for individual automation projects and create GTI-wide standards for control systems, preferred robot manufacturers, and welding equipment OEMs., • The Welding Robotics Engineer will design, specify, and implement robotic welding cells for modular steel fabrication., • Select and oversee external integrators to execute detailed design work., • Lead internal and external design reviews to verify system safety, quality, and technical alignment., • Coordinate installation, validation, and qualification (IQ/OQ/PQ) of automation systems with integrators and plant teams., • Develop and modify PLC/HMI logic (Allen-Bradley, Siemens, etc.) to control robotic welding cells and integrate them with conveyors, positioners, and vision systems., • Write and optimize robot programs for MIG, TIG, and spot welding applications., • Provide hands-on support to troubleshoot automation systems and minimize downtime., • Lead preventive maintenance schedules for robotic welding systems and controls equipment., • Analyze production data to identify bottlenecks and quality issues., • The Welding Robotics Engineer will implement Lean and Six Sigma methodologies to drive continuous improvement in robotic welding operations., • Partner with mechanical engineers, manufacturing engineers, quality, and maintenance teams to ensure production readiness of automated systems., • Maintain detailed technical documentation including robot programs, schematics, and SOPs., • Bachelor’s degree in Mechanical, Electrical, Mechatronics, or Industrial Engineering, • 8–10+ years of experience in manufacturing automation or controls engineering, • Hands-on experience implementing and supporting robotic welding systems, • Proficiency with industrial welding robots (FANUC, ABB, Motoman, KUKA or similar), • Strong experience with PLC programming and controls integration (Allen-Bradley, Siemens, etc.), • Proven success leading cross-functional automation projects and managing integrators, • Strong understanding of welding processes (GMAW, GTAW, resistance spot welding) and metallurgy basics, • Knowledge of industrial safety standards (OSHA, NFPA79) and risk assessments for robotic systems, • Excellent analytical, problem-solving, and troubleshooting skills, • Strong project management skills to coordinate multiple automation projects and vendor integrations, • Experience with robotic simulation tools (RoboGuide, RobotStudio, etc.), • Experience integrating vision systems, sensors, motion control, or automated material handling, • Familiarity with CAD (SolidWorks, AutoCAD) for fixture or tooling design, • Lead automation for a rapidly growing industrial fabrication company, • Hands-on, high-impact technical role in a fast-paced environment, • Competitive compensation and benefits

Job Description At-a-Glance: Are you ready to build your career by joining a certified technology solutions and compliance consulting services company? If so, our client is hiring a Maintenance/Installation/Equipment Engineer. Position Type: • Contract, • Bachelor’s degree in Electronic Engineering, Electro-Mechanical Engineering, or equivalent hands-on field experience., • Required:, • Hands-on experience with freeze dryers / lyophilization equipment in pharmaceutical, biotech, or life sciences environments., • Strong background in electro-mechanical maintenance., • Experience supporting equipment installation, commissioning, and/or SAT., • Ability and willingness to physically work on machines on-site., • Experience with:, • Mechanical and electrical systems., • PLC-controlled equipment., • General troubleshooting and fault isolation., • Comfortable working independently on-site and interfacing directly with customers., • Preferred / Nice to Have, • 2+ years of experience with PLC, electrical, and electronic systems., • Experience with freeze drying, filling lines, or other key biotech/life sciences process equipment., • Prior experience working with OEMs or equipment vendors in regulated environments., • Success in Role:, • Close investigations on time., • Root causes are evidence based., • CAPAs prevent recurrence., • Support Factory and Site Acceptance Testing (FAT & SAT), installation, and troubleshooting activities for life sciences and biotech equipment., • Support installation, commissioning, and FAT/SAT activities for new and existing equipment (hands-on execution focused; limited C&Q)., • Perform corrective, preventive, and predictive maintenance on life sciences and biotech equipment, with a strong emphasis on freeze dryers / lyophilization systems., • Participate in customer site preparation for installation events, including machine assembly and readiness activities., • Support configuration of devices and sensors (e.g., pressure transmitters, flow meters) and calibration of temperature and pressure probes., • Perform on-site and remote troubleshooting and fault finding, including mechanical, electrical, and control system issues., • Perform I/O verification, electrical walkdowns, hardware interlock verification, and voltage and current checks., • Conduct training for production supervisors and operators at customer sites., • Establish and maintain strong customer relationships, including follow-up on concerns and technical issues., • Execute timely and accurate reporting of technical issues and findings in accordance with company processes., • Apply lyophilization expertise to support business continuity planning and lifecycle updates for facility and process equipment., • Collaborate with manufacturing staff, engineering teams, OEMs, and cross-functional partners during commissioning and operational phases.

Job Description Advance your career with the Stark Tech team. We'll shape your future together! Stark Tech is a total optimization provider of facilities and energy solutions. Stark Tech leads the market in providing cutting-edge facilities and energy solutions. We integrate systems, offer energy-efficient equipment and services, and provide building analytics to help customers meet sustainability goals. Our large-scale equipment converts waste to renewable natural gas, reducing greenhouse gas emissions. Additionally, we enhance the utility grid with microgrid and battery energy storage solutions, along with solar development consulting services. Join Stark Tech to be part of the future of energy transformation. What you can expect We believe your well-being and satisfaction are vital for a fulfilling career. We are gritty, employee, and customer focused. Here are some of the benefits we provide: • Paid Time Off & Holidays, • 401(k) with employer match, • Medical/Dental/Vision insurance, • Health Savings Account (HSA) and Flexible Spending Account (FSA), • HSA employer contribution, • Life and Disability insurance, • Wellness Program (participation incentives), • Employee Assistance Program, • Competitive pay The Controls Engineer II is responsible for the development and implementation of industrial controls systems for RNG plants and related skid systems utilizing PLC's, SCADA, and HMI software to meet project and customer requirements. Familiarity with controls, electrical power systems, field devices, operations, network configurations, and industrial communications protocols are required. What would we like to see? • Bachelor's degree in electrical engineering or a related engineering field required. Additional experience will be considered in lieu of degree., • 5+ years related experience in control system design and related hardware specification and selection., • Experience with Rockwell and/or other similar PLC platforms., • Experience with Human Machine Interface (HMI) and/or SCADA systems, • AutoCad Electrical knowledge helpful, • General knowledge of rotating equipment such as pumps, compressors and motors., • Experience with AC/DC electrical systems and components such as VFD's, power supplies, relay logic, etc., • Experience leading troubleshooting, testing, and commissioning of automated machine systems, components, and electrical devices., • Detailed knowledge of NEC (National Electric Code) and other international electrical codes such as IEC and CSA., • Ability to communicate clearly and professionally with clients, suppliers, and internal team on a regular basis, both verbally and in writing., • Must be good at multi-tasking and running multiple projects in different stages of completion at once., • High organizational skills are required to maintain and track all project correspondence and documentation. Our fast-growing organization offers competitive pay, a positive work environment, and opportunities for career growth within the company. If you're a motivated individual with a sense of accountability, resiliency, and a dedication to providing exceptional customer service, we encourage you to get in touch with us. The advertised compensation range for this position represents what we believe, at the time of posting, to be competitive and acceptable by reviewing comprehensive market data to include industry, and roles of similar responsibility and level. Within the range, wage will be determined by several factors including candidate knowledge, job-related skills, experience, and relevant education or training. Job Posted by ApplicantPro

Job Description We are looking for a Manufacturing Engineer to join our growing company. Our customers drive the work we do, and we empower our employees to deliver best-in-class service. As part of our team, you are responsible for identifying new methods, resolving problems, achieving cost savings, and working with internal teams to ensure production runs smoothly and safely. Our ideal candidate has a bachelor’s degree in mechanical engineering or a related field, professional experience within a manufacturing and design environment, and strong problem-solving and math skills. WE WILL NOT CONSIDER ANY CANDIDATE THAT DOES OR WILL NEED SPONSORSHIP IN THE FUTURE OR ANYONE WHO IS CURRENTLY NOT RESIDING IN MICHIGAN. Responsibilities: • Act as the single point of contact to resolve tool-related problems related to manufacturing, • Coordinate with the plant to resolve safety, quality, throughput, or cost issues related to tooling, • Generate and implement cost savings ideas to reduce tool and manufacturing costs, • Manage weekly tooling spend against a variable piece cost budget, • Perform and document tool trials and adhere to customer tool test procedures, • Revise and update tool drawings and documentation as required, • Develop new systems to recondition and re-use tooling when economically feasible, • Attend regularly scheduled operations and team problem-solving meetings, • Assist team in resolving machining and tooling-related issues relating to costs, scrap rates, and low production rates, • Support cross-functional teams to achieve overall plant metrics, • Recommend optimized machining processes and cutting parameters, • Introduce new technology and improved tooling designs, • Provide year over year Cost per Piece reduction plans, • Coordinate with the preset team on proper tool setup techniques, • Maintain PFEP and use PFEP and Top Spend Data to initiate savings projects, • Complete required cost savings and tool test documentation, • Report and document non-conformances, CARs, and continuous improvements, • Maintains safety and good housekeeping standards for the site, • Make decisions within the limits of general standards or procedures, • Report near misses and incidents to the site manager and cooperate with investigations, • 5 years of experience working in production machining, a bachelor’s degree in mechanical engineering, or experience working in a closely related technical field is preferred, • Prior experience designing and tooling parts in a manufacturing environment, • Strong math and problem-solving skills and ability to read blueprints and schematics, • Proficiency with computers, • Able to work with little to no supervision and ability to multitask, • Strong interpersonal, leadership, and organizational skills, • Paid time off and holiday pay, • Medical, dental, and vision benefits on your 1st day of employment

Job Description We are currently seeking Senior Gas Project Engineer(s) in a hybrid setting located somewhere in Central NY, Western NY, or Northwestern PA. The ideal candidate has at least a Bachelor’s degree in Civil or Mechanical Engineering (or other engineering field with the required experience). The successful candidate will act in a consultant role for our existing utility clients. Types of projects include (but are not limited to) main and service replacements, system improvements, pressure upgrades, new business main extensions, highway improvements, regulator station and facility design, Gate Station design, odorization, pre-heat, valve replacements, Mega Rule compliance activities, cathodic protection design, critical crossing and horizontal directional drilling design, odorization and pipe conditioning, Integrity Projects, Stress Analyses using FEM software, and more. Duties • Conduct preliminary field work which would include carrying approximately 10 lbs. throughout the work day. Expected amount of field work would be approximately 5-10% of annual work load, but may vary based on client needs and project assignments., • Coordinate with all project stakeholders and act in the interest of our clients to support their project goals., • Production of quality basemap and construction drawings for client, municipal, and regulatory agency review using AutoCAD., • Including details, BOM, Material Specifications, O&M manual development, management of inter-disciplinary projects, and more., • Development of energization and de-energization procedures., • Contractor and construction cost estimation., • Alternative Analyses and detailed comparisons including Risk Assessment, • Code and Compliance Reviews, Gap Analyses, O&M and Construction standard audits and modification., • DIMP and/or TIMP plan development and/or audits and/or improvements., • Data entry into SAP Work Management System to support your project work in our clients’ WMS’s., • Apply for and obtain municipal highway permits and other right-of-way permits (e.g. NYSDOT, railroad, Thruway Authority, Canal Corporation, etc.), • Assist with Procurement activities and evaluate bid submissions, • Participate in pre-construction and/or pre-bid meetings, site visits to meet with contractors and owners, etc., • Coordinate with landowners to obtain right-of-way / easement when required., • Create as-built records from inspector’s field notes., • Supervise, mentor, and train junior staff. Act as a role model. Set and monitor goals, objectives, and progress., • This is a Senior Level position, and you must have proven / demonstrated the ability to perform the duties of this role through previous employment., • Bachelor’s or master's degree in civil or mechanical engineering (or other closely related field)., • Minimum of 10 years of related experience for Natural Gas Operator or consultant in Natural Gas industry (Transmission and Distribution with FERC familiarity preferred), • Strong verbal and written communication skills., • Presents and conducts themselves in a professional manner., • Able to pace themselves and work within defined project budgets., • Ability to balance multiple projects and assignments and prioritize their individual workload., • Need to possess a valid driver's license with a safe driving history required., • Excellent organizational skills., • Willingness to travel to project sites in Northwestern PA, Central NY, and Western NY., • Ability to carry 10 lbs. throughout the workday sometimes through difficult terrain such as forests, agriculture fields, etc., • Preferred / Bonus Experience:, • Compressed Natural Gas, • Hydrogen transportation and/or blending., • Professional Engineering license or GTI Competent Engineer Certification Salary Range: $75,000 - $125,000 per year The specific salary offered may be influenced by a variety of factors including but not limited to the candidate's relevant experience, education, and work location. Benefits Body, mind, and wallet—LaBella’s benefits support a holistic approach to your health and wellness, creating the foundation for physical, mental, and financial well-being. Our benefit offerings cover the must-haves (healthcare and retirement), the just-in-cases (insurances and employee assistance programs), and the cherry-on-tops (fitness reimbursements, year-end incentive pay, and tuition assistance). Visit our website for more details on benefits listed below. • Flexible Work Schedule, • Health/Dental Insurance, • 401k Plan with Employer Match, • Short & Long Term Disability, • Profit Sharing, • Paid Time Off, • Leadership Development Program, • Fitness Reimbursement, • Tuition Reimbursement, • Referral Bonus Program, • Wellness Program, • Team Building Events, • Community Service Events

Job Description Position Summary: GTI Fabrication is seeking a highly experienced and technically proficient Senior Manufacturing Engineer to lead the design, control, and continuous improvement of manufacturing processes in a modular fabrication environment. This individual contributor role focuses on developing scalable, efficient production methods for custom enclosures, containerized systems, and structural steel weldments. The ideal candidate will have deep experience in SolidWorks, AutoCAD, Lean Manufacturing, and quality systems such as ISO9001. The Senior Manufacturing Engineer will work cross-functionally with Engineering, Operations, Quality, and Supply Chain to ensure manufacturability, cost-effectiveness, and regulatory compliance across the product lifecycle. Key Responsibilities: • Design, implement, and optimize manufacturing processes for modular fabricated systems, containerized enclosures, and steel structures., • Develop formal manufacturing documentation including process flow diagrams, work instructions, BOMs, routings, CNC programming, and assembly/inspection plans., • Use CAD tools (SolidWorks and AutoCAD) to design fixtures, tooling, and work-holding solutions to support scalable production., • Translate engineering design requirements into robust and efficient production processes., • Lead new product introduction (NPI) efforts from prototype through full-rate production., • Apply Lean Manufacturing principles to reduce waste, improve flow, and optimize floor layouts., • Integrate automated and digital manufacturing technologies where applicable., • Collaborate with cross-functional teams to evaluate manufacturability and ensure alignment between engineering intent and production capability., • Utilize ERP systems (NetSuite preferred) to manage process documentation and support real-time operations visibility., • Maintain compliance with ISO 9001 standards; support internal and external audits., • Drive root cause analysis and corrective action using tools like FMEA, SPC, and 8D., • Bachelor’s degree in Mechanical Engineering, Manufacturing Engineering, or related field., • 8–15 years of experience in manufacturing engineering, preferably in modular fabrication, defense, energy, or industrial equipment sectors., • Proficiency in SolidWorks and AutoCAD for 3D modeling, 2D drafting, and tolerance analysis., • Strong working knowledge of Lean Manufacturing, Six Sigma, or similar methodologies., • Experience with ERP/MRP systems (NetSuite a plus)., • Demonstrated success in process development, design for manufacturability, and production scaling., • Hands-on experience with containerization, modular product platforms, and structural weldments., • Knowledge of ISO9001 quality systems and compliance standards., • Exceptional analytical, problem-solving, and project management skills., • Experience in containerized HVAC, power distribution, or control system enclosures., • Familiarity with CNC machining, sheet metal fabrication, and industrial coatings., • Certification in Lean Six Sigma, PMP, or related process improvement disciplines., • This is a full-time onsite position based in Buffalo, NY., • Work takes place in both office and fabrication floor environments., • May require occasional travel to customer sites or GTI facilities., • Must be able to occasionally lift up to 25 lbs and walk fabrication areas. GTI Fabrication is an equal opportunity employer committed to building a diverse and inclusive workplace.

Job Description Overview Are you ready to join a growing team? CTG is seeking to fill a Software Engineer III opening for our client. Location: Buffalo, NY Duration: 10 months Overview: As a Software Engineer III, you will design, develop, and deliver high-quality software solutions while providing technical leadership on complex projects. You will serve as a key contributor in system architecture, microservices development, and DevOps practices, helping the team meet both short-term goals and long-term strategic objectives. Primary Responsibilities: * Own application architecture and define technology stack components (Java, Spring Boot, databases, messaging, caching, API gateway, security frameworks). * Design and implement scalable, secure, and high-performance APIs (RESTful, GraphQL). * Lead hands-on development, including setting up codebases, reusable patterns, and modular services. * Collaborate with DevOps to define CI/CD pipelines (Docker, Kubernetes, Jenkins/GitHub Actions) and manage environment configurations. * Integrate logging, monitoring, health checks, and metrics from the start (Prometheus, Grafana, ELK stack). * Establish coding standards, code reviews, and Git workflow strategies; mentor junior engineers. * Collaborate with Product Owners, UX, QA, and stakeholders to deliver high-quality features. * Ensure security best practices, including authentication, secure endpoints, and vulnerability remediation. * Maintain up-to-date documentation, including API specs (OpenAPI/Swagger) and architectural decisions. * Provide technical guidance, coordinate development tasks, and review work of less experienced team members. * Participate in vendor software evaluations and recommend improvements to technologies, policies, or processes. Qualifications – Required: * Associate’s degree with 6+ years of systems analysis/application development experience, or equivalent combination of education and experience. * Proficiency with Java and Spring Boot; experience with microservices or modular monolith architectures. * Hands-on experience with CI/CD pipelines, containerization (Docker), and orchestration (Kubernetes/Helm). * Strong understanding of application security and best practices. * Experience leading projects, mentoring engineers, and collaborating with cross-functional teams. * Excellent problem-solving, organizational, and communication skills. Qualifications – Preferred: * Knowledge of banking or financial applications and frameworks. * Experience with observability tools (Prometheus, Grafana, ELK) and API documentation standards. * Ability to handle complex, multi-component projects and work independently. Excellent verbal and written English communication skills and the ability to interact professionally with a diverse group are required. CTG does not accept unsolicited resumes from headhunters, recruitment agencies, or fee-based recruitment services for this role. To Apply: To be considered, please apply directly to this requisition using the link provided. For additional information, please contact Nicole Shaw at . Kindly forward this to any other interested parties. Thank you!

Job Description Overview CTG is seeking to fill a Network Systems Specialist – Backup Administrator position for our client. Location: Buffalo, NY Duration: Client Permanent Placement Duties: * Provide a full range of technical services for infrastructure technologies, including servers and SAN environments, covering setup, configuration, implementation, security, system traffic analysis, capacity planning, and daily operations. * Serve as the primary enterprise backup administrator. * Administer and support Veeam and Commvault enterprise backup platforms. * Manage and schedule backups to ensure timely and reliable data protection. * Monitor backup jobs, investigate failures, and implement corrective actions. * Verify backup integrity and perform restore operations (file-level, application-level, and VM-level) as required. * Troubleshoot backup and recovery issues under defined SLAs. * Maintain backup documentation, operational runbooks, logs, and audit/compliance records. * Collaborate with infrastructure, application, and security teams to ensure backup solutions align with business continuity and disaster recovery objectives (RTO/RPO). * Support small infrastructure-related projects and ongoing system operations. Skills: * Hands-on administration of enterprise backup and recovery solutions, specifically Commvault and/or Veeam Backup & Replication. * Strong understanding of backup methodologies, retention policies, and restore operations. * Experience monitoring backups, troubleshooting failures, and executing restores in production environments. * Administration experience in virtualized environments (VMware vSphere and/or Microsoft Hyper-V). * Working knowledge of Windows Server environments; familiarity with Linux systems supporting repositories or hardened backup targets. * Knowledge of SAN/NAS storage technologies, disk-based repositories, and backup capacity planning. * Understanding of disaster recovery practices, backup verification, and restore testing. * Familiarity with security practices including patching, access controls, and vulnerability remediation related to backup infrastructure. * Strong documentation, analytical, and problem-solving skills. Experience: * Minimum of 3+ years of experience in backup administration or infrastructure support roles supporting enterprise environments. Education: One of the following is required: * Master’s degree and two (2) years of full-time experience in computer system hardware, operating systems and software, enterprise networking, or computer systems security; or * Bachelor’s degree and four (4) years of full-time experience in computer system hardware, operating systems and software, enterprise networking, or computer systems security; or * Associate’s degree and six (6) years of full-time experience in computer system hardware, operating systems and software, enterprise networking, or computer systems security; or * High School Diploma or High School Equivalency Diploma and eight (8) years of full-time experience in computer system hardware, operating systems and software, enterprise networking, or computer systems security. Degrees must be granted by an accredited college, university, or recognized educational institution. Preferred Qualifications: * Advanced experience with Commvault Enterprise environments, including policy design, storage configuration, and reporting. * Advanced Veeam features such as scale-out repositories, replication, and enterprise monitoring. * Commvault Certified Professional (CCP) and/or Veeam Certified Engineer (VMCE) certifications. * VMware, Microsoft, or storage-focused infrastructure certifications. * Experience backing up databases and enterprise applications (e.g., SQL Server, Oracle). * Scripting or automation experience (PowerShell or shell scripting). * Exposure to hybrid or cloud-integrated backup architectures and object storage tiering. * Strong communication skills when working with infrastructure, application, security, and audit teams. Excellent verbal and written English communication skills and the ability to interact professionally with a diverse group are required. CTG does not accept unsolicited resumes from headhunters, recruitment agencies, or fee based recruitment services for this role. To Apply: To be considered, please apply directly to this requisition using the link provided. For additional information, please contact Tana Stilloe at . Kindly forward this to any other interested parties. Thank you! The expected base salary for this position ranges from $90,000 to $110,000. Salary offers are based on a wide range of factors including relevant skills, training, experience, education, market factors, and where applicable, licensure or certifications obtained. In addition to salary, a competitive benefit package is also offered.

Job Description Allient Inc. is in growth mode and currently seeking a Staff Systems Engineer to join our team at our corporate innovation center and headquarters located in Buffalo, New York! The Systems Staff Engineer leads system-level engineering for customer applications, working closely with leadership, sales, engineering teams, suppliers, and customers. This role supports major multi-site projects built around Allient’s core technologies: Motion, Control, Power, and Lightweighting. Apply now! Responsibilities: • Lead complex system design & analysis across electrical, mechanical, software, actuation, and composite technologies., • Define system architecture from customer requirements and applicable standards., • Manage requirements, including subsystem definitions, derived requirements, tolerances, and traceability., • Use modeling and simulation to verify performance, reliability, safety, and risk mitigation., • Create and manage test plans, procedures, fixtures, and tooling globally., • Perform subsystem testing and support integration into customer vehicles or applications., • Evaluate new and modified product designs to ensure performance meets specifications., • Present technical information to support strategic, multi-site planning., • Review and critique design work from others and promote best practices., • Collaborate directly with customers and internal teams on requirements, project updates, and test results., • Contribute to standard process and procedure development., • Mentor engineers at various levels., • Serve as a technology expert and help guide innovation for products and processes., • Support proposals, including technical definitions, diagrams, and compliance documentation., • Operate with a high degree of independence; only major deliverables require senior review., • Work across multiple projects and locations simultaneously., • Some limited travel may be required (20% typical), • Bachelor’s degree in electrical, mechanical, or aerospace engineering + 11 years’ experience, or Master’s degree + 9 years’ experience., • Experience with actuation systems (motors, gearing, ball screws, electronics, software)., • Knowledge of composites/lightweighting preferred., • Experience with military/defense programs or government contracting preferred., • Strong ability to interpret and develop technical instructions, diagrams, and abstract concepts., • Proven technical expertise in one or more engineering disciplines. Don't let this opportunity pass you by - APPLY TODAY! To learn more about Allient Inc. visit Allient Inc. provides equal employment opportunities to all employees and applicants for employment and prohibits discrimination and harassment of any type without regard to race, color, religion, age, sex, national origin, disability status, genetics, protected veteran status, sexual orientation, gender identity or expression, or any other characteristic protected by federal, state, or local laws. This applies to all terms and conditions of employment, including recruiting, hiring, placement, promotion, termination, layoff, recall, transfer, leaves of absence, compensation, and training.

Job Description Quality Engineer - 2nd Shift Job Description This position will be for 2nd shift: Monday-Friday 3:30pm-12pm What you’ll do: The Quality Engineer will be tasked to build and/or support a supplier quality system that meets the stringent requirements GTI flows down, offering specific subject matter expertise concerning stampings, welding, steel and electro-mechanical assemblies The Supplier Quality Engineer will report to the Director of Supplier Quality and be responsible for ensuring supplier and customer contract requirements are met. Will facilitate and lead critical Suppliers’ compliance with select Advanced Product Quality Planning (APQP) tools such as Approved Vendor List (AVL), Production Part Approval Process (PPAP), Potential Failure Mode and Effects Analysis (FMEAs), Control Plans, et cetera within ISO 9001, and BESS Industry framework. Work with suppliers to develop and implement best practices that emphasize defect prevention, reduction in variation and waste; and provision of continuous improvement to meet quality standards. You will: • Implement vendor auditing as part of the construction of GTI AVL including quality systems, statistical capability, destructive and non-destructive testing / inspection, configuration management, lot acceptance, and continuous improvement functions., • Develop and implement an effective system for communication, rapid containment, root-cause corrective action, and continuous improvement to prevent recurrence of production, quality and system deficiencies for all external supplier processes and internal Supplier Scorecards and disruptions., • Assist from a Supplier perspective, GTI process yields; defects escapes; the cost of poor quality; delivery on time disruptions., • Ensure Supplier issues are properly tracked and effectively closed through the SCAR’s/ Eight Discipline (8D) methodology, • Provide effective cascade down of Contract review for Quality Assurance specifications and adherence prior to new contract proposals and awards, then interacts closely with suppliers to proactively mitigate disruptions and maintain strong working relationships, most especially with large scale or Contract Manufacturers., • Facilitates a sustainable and robust Quality Management System across critical suppliers., • Educate and facilitate the use of the Lean Manufacturing and Six Sigma tools (e.g., 5S, Standard Work, TPM, Kaizen events, etc.) in response to poor performing suppliers where GTI objectives of Safety, Quality, Delivery On-Time, and Productivity are impacted., • Lead specific supplier development strategies, manage key performance indicators, and mitigate with Purchasing Assistance any commercial issues., • Minimize supplier quality costs and maximize GTI customer satisfaction while ensuring that frozen procedures, processes, and sub-suppliers are adhered to., • The employee must regularly interact positively with co-workers, supervisors, and managers; work under severe time constraints and meet multiple demands from several people., • Travel %: potentially 10% to 50% in a year, • Other duties as assigned. The qualifications you must have: • Minimum education bachelor’s degree in engineering, Quality Systems, Manufacturing, or similar education, • Master’s Degree preferred, • Program Management experience a plus, • Certification as an American Society for Quality CSQP, CQE, or CQA is a plus, • Working experience with AIAG APQP and Core Tools required or willing to assimilate within 3 months., • Hands on experience with SAP or advanced ERP systems preferred., • Multitasking abilities are expected. Self-motivated, driven, and positive attitude Strong interpersonal skills, able to motivate and inspire othersCompany DescriptionGTI specializes in the design, engineering, fabrication, and deployment of custom modular structures, shipping container-based structures, and ballistic metal fabrication. We serve multiple industries, including DOD contractors, military, disaster relief, and commercial markets. Our containerized and modular solutions are all built in-house at our factory in Buffalo, NY. Manufacturing capabilities range from military training, live fire enclosures, bathroom/shower units, expeditionary camps, medical facilities, water treatment, electrical/energy storage enclosures, and much more.GTI specializes in the design, engineering, fabrication, and deployment of custom modular structures, shipping container-based structures, and ballistic metal fabrication. We serve multiple industries, including DOD contractors, military, disaster relief, and commercial markets. Our containerized and modular solutions are all built in-house at our factory in Buffalo, NY. Manufacturing capabilities range from military training, live fire enclosures, bathroom/shower units, expeditionary camps, medical facilities, water treatment, electrical/energy storage enclosures, and much more.

Job Description Hazen and Sawyer is seeking an Principal Electrical Engineer for our Saratoga Springs and Buffalo New York offices. As part of our electrical team you will have exceptional opportunities to provide superior solutions to our clients’ most difficult problems through a variety of water related assignments. The successful candidate will be involved in a wide range of electrical power, lighting, and motor control system design and analysis for water, wastewater, reuse, and infrastructure projects. Why Hazen and Sawyer: • Founded in 1951 by the son of Allen Hazen (developer of the Hazen-Williams equation), we are an employee-owned company with a singular focus on "all things water.", • Our work includes planning, design, and oversight of construction of environmental infrastructure – for water, wastewater, and stormwater management., • We foster a work environment low on bureaucracy and high in creativity., • We recruit talented professionals, provide them with challenging, interesting, and creative assignments, and furnish them with the tools they need to succeed., • We currently have over 2,000 employees in 70+ offices throughout the United States, Latin America, Canada, and the UK., • Integrating with design team from initial studies and conceptual design through construction of substation, generators, pump stations, and/or treatment facilities., • Field investigations and site visits from design through construction., • 5 – 15 years’ experience, • Bachelor’s degree in electrical engineering or electrical engineering technology (MS or MEng Preferred), • Professional Engineering license in NY, • Self-starter with attention to detail, • Candidate must possess excellent writing, communication, interpersonal, and organizational skills., • Must be proficient in all computer software typically used (e.g., Microsoft Word, Excel, PowerPoint, etc.)., • Comprehensive health benefits (medical, dental, vision, and prescription plans), • Pre-tax flexible spending plans for medical, dependent care, and transportation, • Short and long-term disability, and employer paid life insurance, • Paid holidays, floating holidays, and paid time off (PTO), • Employer-contributed 401(k) plan and additional financial planning support, • Professional growth opportunities, including tuition reimbursement, in-house training, and incentives for professional registration and professional organization memberships, • Starting pay range for this position depends on skills, experience, education and geographical location.

Job Description Advance your career with the Stark Tech team. We'll shape your future together! Stark Tech is a total optimization provider of facilities and energy solutions. Stark Tech leads the market in providing cutting-edge facilities and energy solutions. We integrate systems, offer energy-efficient equipment and services, and provide building analytics to help customers meet sustainability goals. Our large-scale equipment converts waste to renewable natural gas, reducing greenhouse gas emissions. Additionally, we enhance the utility grid with microgrid and battery energy storage solutions, along with solar development consulting services. Join Stark Tech to be part of the future of energy transformation. What you can expect We believe your well-being and satisfaction are vital for a fulfilling career. We are gritty, employee, and customer focused. Here are some of the benefits we provide: • Paid Time Off & Holidays, • 401(k) with employer match, • Medical/Dental/Vision insurance, • Health Savings Account (HSA) and Flexible Spending Account (FSA), • HSA employer contribution, • Life and Disability insurance, • Wellness Program (participation incentives), • Employee Assistance Program, • Competitive pay Stark Tech is seeking a Senior Project Engineer - Mechanical who excels by transforming mechanical system requirements into high-performance, energy-efficient, and fully integrated building solutions. You lead projects from conceptual design through construction support and commissioning, applying deep technical expertise in HVAC, hydronics, central plant systems, and air distribution to ensure every design is safe, code-compliant, and optimized for long-term reliability. You thrive at bridging early pre-construction solutioning with detailed engineering and field execution-collaborating across mechanical, electrical, structural, controls, and architectural teams to deliver systems that perform as designed in the real world. Through technical leadership, clear communication, and mentorship of engineering and design staff, you elevate project quality, improve constructability, reduce risk, and strengthen Stark Tech's reputation for delivering high-performance mechanical infrastructure. What are we looking for • Associate degree required; Bachelor's degree preferred. Advanced degree a plus., • 10+ years of experience in mechanical building systems or energy-driven infrastructure projects., • Proven experience leading projects and managing engineering or cross-functional teams., • Expertise in HVAC system design, load calculations, equipment selection, air and fluid distribution, and central plant systems., • Experience defining sequences of operation and integrating mechanical systems with BAS platforms., • Proven ability to conduct system retrofits, upgrades, and performance optimization analyses., • Thorough knowledge of applicable codes, safety standards, and environmental/regulatory considerations., • Skilled in creating Basis of Design documents, narratives, specifications, and construction documentation., • Experience coordinating mechanical designs with electrical, structural, controls, and architectural teams., • Proven ability to mentor junior engineers and influence cross-functional project teams., • Strong customer-facing communication skills. Our fast-growing organization offers competitive pay, a positive work environment, and opportunities for career growth within the company. If you're a motivated individual with a sense of accountability, resiliency, and a dedication to providing exceptional customer service, we encourage you to get in touch with us. The advertised compensation range for this position represents what we believe, at the time of posting, to be competitive and acceptable by reviewing comprehensive market data to include industry, and roles of similar responsibility and level. Within the range, wage will be determined by several factors including candidate knowledge, job-related skills, experience, and relevant education or training. Job Posted by ApplicantPro

Job Description Are you an experienced electrical engineer looking for an opportunity to grow your skills and work on a variety of exciting building projects? We are seeking an Electrical Engineer to join our Buffalo, NY office. In this role, you will work closely with senior engineers, project managers, and multi-discipline teams to develop electrical system designs, drawings, specifications, and reports for a diverse range of buildings. You will have the opportunity to gain experience in various markets, including healthcare, commercial, education, and institutional projects. This is a growth-focused position, ideal for an engineer eager to expand their knowledge and contribute to innovative, high-quality designs. At LaBella, we are passionate about problem-solving, sustainability, and creating impactful solutions for the built environment. The ideal candidate is self-motivated, detail-oriented, and eager to develop their expertise. Your responsibilities may include: Electrical Design & Engineering: • Develop electrical designs for power distribution, lighting, fire alarm, security systems, and telecommunications., • Perform load calculations for generators, transformers, switchgear, panel boards, VFDs, feeders, and branch circuits., • Prepare design drawings, technical specifications, and engineering reports., • Research and implement industry standards and best practices., • Assist with building condition assessments and system evaluations. Collaboration & Project Support : • Work closely with mechanical, civil, and structural engineers, as well as architects., • Assist senior engineers in multi-discipline project coordination., • Communicate with clients, manufacturers, and contractors to address project challenges and develop solutions., • Participate in project meetings and contribute technical insights. Technical Growth & Development: • Stay current with industry trends, codes, and emerging technologies., • Receive mentorship from senior engineers and take on increasing project responsibilities., • Bachelor’s or associate’s degree in electrical engineering, Engineering Technology, or a related field., • EIT certification preferred; working towards or having PE licensure is a plus., • Minimum 5 years of experience in electrical engineering within an A/E consulting firm, or closely related industry., • Experience with building system design. Healthcare experience is strongly preferred., • Proficiency in AutoCAD and Revit is required., • Familiarity with electrical modeling programs (e.g., AGi32 for lighting, SKM for power analysis) is required., • Understanding of national, state, and local electrical codes., • Strong organizational, communication, and problem-solving skills., • Ability to work on multiple projects simultaneously and meet deadlines. Salary Range: $85,000 - $125,000 per year The specific salary offered may be influenced by a variety of factors including but not limited to the candidate's relevant experience, education, and work location. Why Join Us? • Collaborative team environment with mentorship opportunities., • Exposure to a variety of building projects in different industries., • Competitive salary and hybrid work flexibility., • Support for professional development and career growth. Benefits Body, mind, and wallet—LaBella’s benefits support a holistic approach to your health and wellness, creating the foundation for physical, mental, and financial well-being. Our benefit offerings cover the must-haves (healthcare and retirement), the just-in-cases (insurances and employee assistance programs), and the cherry-on-tops (fitness reimbursements, year-end incentive pay, and tuition assistance). Visit our website for more details on benefits listed below. • Flexible Work Schedule, • Health/Dental Insurance, • 401k Plan with Employer Match, • Short & Long Term Disability, • Profit Sharing, • Paid Time Off, • Leadership Development Program, • Fitness Reimbursement, • Tuition Reimbursement, • Referral Bonus Program, • Wellness Program, • Team Building Events LaBella is committed to facilitating a culture where diversity, equity, and inclusion are respected, valued, and celebrated by implementing thoughtful, practical, and innovative strategies that support our employees and serve the communities in which we reside. All applicants will be considered for employment without regard to race, color, religion, age, national origin, ancestry, ethnicity, gender (including pregnancy, childbirth, breastfeeding or other related medical conditions), gender identity, gender expression, sexual orientation, marital status, veteran status, disability, genetic information, citizenship status, characteristic or membership in any other group protected by federal, state or local laws. LaBella Associates does not accept unsolicited resumes from recruiting professionals or agencies, nor do we accept resumes from any source that does not reference a specific, open position. LaBella Associates will not be responsible for any fees arising from the use of resume submitted by recruiting professionals or agencies that do not have a current placement fee agreement with LaBella Associates. All initial communication with recruiting professionals or agencies must go through human resources.

Job DescriptionDescription: Ferguson Electric’s Electrical Engineer II is a mid-level position for engineers focusing on becoming self-sufficient on design and engineering tasks. This position will contribute to the electrical system design, engineering, commissioning and construction efforts for commercial and industrial projects, including healthcare, education, research, commercial facilities, and utilities. This role involves supporting project design teams, developing innovative electrical solutions, and ensuring compliance with applicable codes and standards. The Electrical Engineer II role will provide guidance to junior staff as needed, assist in managing project deliverables, and support the company’s commitment to quality, safety, and client satisfaction while upholding Ferguson Electric’s core values. RESPONSIBILITIES • Electrical Systems Design:, • Design of electrical systems, including power distribution, lighting, fire alarm, and communication systems, for commercial and industrial projects., • Support the development of project design goals, specifications, and strategies to meet client requirements and project objectives., • Participate in quality control reviews of engineering documents to learn about accuracy and compliance with project requirements., • Help ensure designs comply with applicable codes (e.g., NFPA, IEEE) and industry standards., • Electrical Systems Analysis and Field Support:, • Help specify electrical equipment, components, and materials, ensuring compatibility with project needs and budgets under supervision., • Perform engineering studies, such as load analysis, short-circuit, and coordination and arc flash, using tools like SKM or Easypower with minimal supervision., • Review of submittals, shop drawings, and other construction documents to ensure they are meeting the project requirements., • Develop relay, transformer, breaker and battery testing plans and reports with minimal experience., • Develop relay programs with minimal guidance., • Support service technicians with troubleshooting customer electrical system problems under the guidance of higher-level engineers., • Project Leadership:, • Support the coordination of electrical engineering aspects of projects, helping adhere to budgets, schedules, and quality standards., • Participate in project team and client meetings to align on project scope, progress, and deliverables., • Assist in the preparation of construction documents, including drawings and specifications., • Site Engagement:, • Participate in job site visits to observe existing conditions, monitor construction progress, and learn about compliance with design specifications., • Attend construction meetings and provide basic technical support to field teams and subcontractors as needed., • Perform physical walk-throughs of sites under supervision to assess conditions and resolve issues., • Process Improvement:, • Contribute to strategies to improve design quality, coordination, and efficiency in production efforts., • Support the incorporation of renewable and sustainable design practices where applicable to enhance project outcomes. Requirements: ABOUT YOUR QUALIFICATIONS • Education and Experience:, • Bachelor’s degree in Electrical Engineering or Architectural Engineering from an ABET-accredited program required and preferred with electrical systems focus., • 4-6 years of experience in electrical engineering, with a focus on commercial or industrial projects., • Engineer-in-Training (EIT) certification is required or additional 5 years of experience directly related to the job responsibilities., • Technical Skills:, • Strong proficiency with Microsoft Office Suite (Word, Excel, Outlook) for documentation and reporting., • Proficiency in drawing software (e.g. Revit and AutoCAD) and electrical analysis software (e.g., SKM) is preferred., • Good understanding of designing power distribution, lighting, and communication systems per NEC, IEEE and other relevant codes is preferred., • Ability to read and understand construction drawings and specifications., • Basic understanding and knowledge of electrical system installation methods and standards., • Exposure to renewable energy systems or sustainable design practices is a plus., • Soft Skills:, • Strong problem-solving skills and ability to work on multiple tasks., • Good leadership and mentorship skills to contribute to team efforts., • Good communication and interpersonal skills to collaborate with clients, contractors, and internal teams., • Organizational and time management skills to handle tasks and meet deadlines., • Ability to adapt to an adjusted work schedule, including occasional overtime or evening/weekend hours, to meet project demands., • Willingness to accept constructive feedback and make changes as necessary to improve job performance., • Willingness to learn and develop skills in various engineering tasks, software, and equipment., • Other Requirements:, • Ability to conduct physical site walk-throughs and work in various environmental conditions., • Participate in in-house and manufacturer training to enhance skills.

Job Description Advance your career with the Stark Tech team. We'll shape your future together! Stark Tech is a total optimization provider of facilities and energy solutions. Stark Tech leads the market in providing cutting-edge facilities and energy solutions. We integrate systems, offer energy-efficient equipment and services, and provide building analytics to help customers meet sustainability goals. Our large-scale equipment converts waste to renewable natural gas, reducing greenhouse gas emissions. Additionally, we enhance the utility grid with microgrid and battery energy storage solutions, along with solar development consulting services. Join Stark Tech to be part of the future of energy transformation. What you can expect We believe your well-being and satisfaction are vital for a fulfilling career. We are gritty, employee, and customer focused. Here are some of the benefits we provide: • Paid Time Off & Holidays, • 401(k) with employer match, • Medical/Dental/Vision insurance, • Health Savings Account (HSA) and Flexible Spending Account (FSA), • HSA employer contribution, • Life and Disability insurance, • Wellness Program (participation incentives), • Employee Assistance Program, • Competitive pay Stark Tech is seeking a Senior Project Engineer - Electrical who excels by transforming complex electrical requirements into safe, reliable, and integrated building infrastructure solutions. You lead projects from conceptual design through commissioning, using deep technical expertise, system analysis, and real-world constructability insight to ensure every electrical system is code-compliant, cost-effective, and optimized for long-term performance. You thrive at bridging design and field execution-coordinating seamlessly with mechanical, controls, and low-voltage teams to deliver fully integrated building solutions that support smarter, more efficient operations. Through technical leadership, cross-functional collaboration, and mentoring of engineering staff, you elevate project quality, reduce risk, and strengthen Stark Tech's reputation for delivering high-performing electrical infrastructure. What are we looking for • Associate degree required; Bachelor's degree preferred. Advanced degree a plus., • 10+ years of experience in electrical building infrastructure, power distribution, or energy/efficiency-driven electrical design., • Proven experience leading projects and managing engineering or cross-functional teams., • Expert knowledge of NEC, NFPA, IEEE, and local AHJ electrical requirements., • Strong understanding of service entrance design, switchgear, grounding, lighting, motor control, and distribution systems., • Experience performing power system studies (short circuit, arc-flash, coordination, voltage drop, load analysis)., • Skilled in producing Basis of Design documents, one-lines, riser diagrams, specifications, and construction documentation., • Ability to coordinate electrical designs with mechanical, structural, controls, and IT teams for fully integrated solutions., • Experience supporting commissioning, functional testing, performance verification, and owner turnover processes., • Proven ability to mentor junior engineers and influence cross-functional project teams., • Strong customer-facing communication skills. Our fast-growing organization offers competitive pay, a positive work environment, and opportunities for career growth within the company. If you're a motivated individual with a sense of accountability, resiliency, and a dedication to providing exceptional customer service, we encourage you to get in touch with us. The advertised compensation range for this position represents what we believe, at the time of posting, to be competitive and acceptable by reviewing comprehensive market data to include industry, and roles of similar responsibility and level. Within the range, wage will be determined by several factors including candidate knowledge, job-related skills, experience, and relevant education or training. Job Posted by ApplicantPro

Job Description What you’ll do: The Quality Engineer will be tasked to build and/or support a supplier quality system that meets the stringent requirements GTI flows down, offering specific subject matter expertise concerning stampings, welding, steel and electro-mechanical assemblies The Supplier Quality Engineer will report to the Director of Supplier Quality and be responsible for ensuring supplier and customer contract requirements are met. Will facilitate and lead critical Suppliers’ compliance with select Advanced Product Quality Planning (APQP) tools such as Approved Vendor List (AVL), Production Part Approval Process (PPAP), Potential Failure Mode and Effects Analysis (FMEAs), Control Plans, et cetera within ISO 9001, and BESS Industry framework. Work with suppliers to develop and implement best practices that emphasize defect prevention, reduction in variation and waste; and provision of continuous improvement to meet quality standards. You will: • Implement vendor auditing as part of the construction of GTI AVL including quality systems, statistical capability, destructive and non-destructive testing / inspection, configuration management, lot acceptance, and continuous improvement functions., • Develop and implement an effective system for communication, rapid containment, root-cause corrective action, and continuous improvement to prevent recurrence of production, quality and system deficiencies for all external supplier processes and internal Supplier Scorecards and disruptions., • Assist from a Supplier perspective, GTI process yields; defects escapes; the cost of poor quality; delivery on time disruptions., • Ensure Supplier issues are properly tracked and effectively closed through the SCAR’s/ Eight Discipline (8D) methodology, • Provide effective cascade down of Contract review for Quality Assurance specifications and adherence prior to new contract proposals and awards, then interacts closely with suppliers to proactively mitigate disruptions and maintain strong working relationships, most especially with large scale or Contract Manufacturers., • Facilitates a sustainable and robust Quality Management System across critical suppliers., • Educate and facilitate the use of the Lean Manufacturing and Six Sigma tools (e.g., 5S, Standard Work, TPM, Kaizen events, etc.) in response to poor performing suppliers where GTI objectives of Safety, Quality, Delivery On-Time, and Productivity are impacted., • Lead specific supplier development strategies, manage key performance indicators, and mitigate with Purchasing Assistance any commercial issues., • Minimize supplier quality costs and maximize GTI customer satisfaction while ensuring that frozen procedures, processes, and sub-suppliers are adhered to., • The employee must regularly interact positively with co-workers, supervisors, and managers; work under severe time constraints and meet multiple demands from several people., • Travel %: potentially 10% to 50% in a year, • Other duties as assigned. The qualifications you must have: • Minimum education bachelor’s degree in engineering, Quality Systems, Manufacturing, or similar education, • Master’s Degree preferred, • Program Management experience a plus, • Certification as an American Society for Quality CSQP, CQE, or CQA is a plus, • Working experience with AIAG APQP and Core Tools required or willing to assimilate within 3 months., • Hands on experience with SAP or advanced ERP systems preferred., • Multitasking abilities are expected. Self-motivated, driven, and positive attitude Strong interpersonal skills, able to motivate and inspire others

Job Description We are currently hiring a mid-level Mechanical Engineer in our Building Engineering Division – Energy Infrastructure team in our Buffalo, NY office. LaBella’s Energy Infrastructure team provides comprehensive energy efficiency and renewable energy consultancy, including feasibility analyses, and design of mechanical systems. Our engineers are well-versed in all aspects of building and energy systems design relating to a variety of new construction, renovations, and design/build projects for a variety of clientele. The Mechanical Engineer will work with our engineers in a lead role on a variety of decarbonization/electrification projects to develop projects in feasibility stages all the way through design and construction. A successful candidate will be able to work well in a team, mentor junior engineers, and communicate effectively with clients. Duties • Lead design of building HVAC systems and district energy systems, • Field investigations to document existing conditions, • Selection and calculations for design purposes, • Work with Jr Engineers to develop and review project drawings and documentation, • Interact directly with clients by completing analysis of design options, cost benefit comparisons, and communicating results to assist in decision making process., • 8-10 years of relevant experience, • Bachelor’s degree in Mechanical Engineering is preferred, • Well-rounded experience in HVAC and hydronic system design, • Preferred: experience designing geothermal or district energy systems, • Experience with Revit or AutoCAD, • New York State Professional Engineer’s license is a plus, • Excellent verbal and written communication skills Salary Range: $80,000 - $120,000 per year The specific salary offered may be influenced by a variety of factors including but not limited to the candidate's relevant experience, education, and work location. Benefits Body, mind, and wallet—LaBella’s benefits support a holistic approach to your health and wellness, creating the foundation for physical, mental, and financial well-being. Our benefit offerings cover the must-haves (healthcare and retirement), the just-in-cases (insurances and employee assistance programs), and the cherry-on-tops (fitness reimbursements, year-end incentive pay, and tuition assistance). Visit our website for more details on benefits listed below. • Flexible Work Schedule, • Health/Dental Insurance, • 401k Plan with Employer Match, • Short & Long Term Disability, • Profit Sharing, • Paid Time Off, • Leadership Development Program, • Fitness Reimbursement, • Tuition Reimbursement, • Referral Bonus Program, • Wellness Program, • Team Building Events, • Community Service Events

Job Description We are currently hiring an Electrical Engineer in our Building Engineering Division – Energy Infrastructure team in our Buffalo, NY office. LaBella’s Energy Infrastructure team provides comprehensive energy efficiency and renewable energy consultancy, including feasibility analyses and design. Our engineers are well-versed in all aspects of building and energy systems design relating to a variety of new construction, renovations, and design/build projects for a variety of clientele. The Electrical Engineer will work with our team in a lead role on a variety of decarbonization/electrification/renewable energy projects to develop projects in feasibility stages all the way through design and construction. A successful candidate will be able to work well in a team, mentor junior engineers, and communicate effectively with clients. Duties • Design building electrical systems, • Design photovoltaic, battery storage systems, and grid interconnection, • Field investigations to document existing conditions, • Interact directly with clients by completing analysis of design options, cost benefit comparisons, and communicating results to assist in decision making process., • 2-4 years of relevant experience, • Bachelor’s degree in Electrical Engineering is preferred, • Well-rounded experience in building electrical system and/or distributed energy system design, • Experience with Revit or AutoCAD, • New York State Professional Engineer’s license is a plus, • Excellent verbal and written communication skills Salary Range: $70,000 - $120,000 per year The specific salary offered may be influenced by a variety of factors including but not limited to the candidate's relevant experience, education, and work location. Benefits Body, mind, and wallet—LaBella’s benefits support a holistic approach to your health and wellness, creating the foundation for physical, mental, and financial well-being. Our benefit offerings cover the must-haves (healthcare and retirement), the just-in-cases (insurances and employee assistance programs), and the cherry-on-tops (fitness reimbursements, year-end incentive pay, and tuition assistance). Visit our website for more details on benefits listed below. • Flexible Work Schedule, • Health/Dental Insurance, • 401k Plan with Employer Match, • Short & Long Term Disability, • Profit Sharing, • Paid Time Off, • Leadership Development Program, • Fitness Reimbursement, • Tuition Reimbursement, • Referral Bonus Program, • Wellness Program, • Team Building Events, • Community Service Events

Job Description Position Summary: GTI Fabrication is seeking a highly experienced and technically proficient Senior Manufacturing Engineer to lead the design, control, and continuous improvement of manufacturing processes in a modular fabrication environment. This individual contributor role focuses on developing scalable, efficient production methods for custom enclosures, containerized systems, and structural steel weldments. The ideal candidate will have deep experience in SolidWorks, AutoCAD, Lean Manufacturing, and quality systems such as ISO9001. The Senior Manufacturing Engineer will work cross-functionally with Engineering, Operations, Quality, and Supply Chain to ensure manufacturability, cost-effectiveness, and regulatory compliance across the product lifecycle. Key Responsibilities: • Design, implement, and optimize manufacturing processes for modular fabricated systems, containerized enclosures, and steel structures., • Develop formal manufacturing documentation including process flow diagrams, work instructions, BOMs, routings, CNC programming, and assembly/inspection plans., • Use CAD tools (SolidWorks and AutoCAD) to design fixtures, tooling, and work-holding solutions to support scalable production., • Translate engineering design requirements into robust and efficient production processes., • Lead new product introduction (NPI) efforts from prototype through full-rate production., • Apply Lean Manufacturing principles to reduce waste, improve flow, and optimize floor layouts., • Integrate automated and digital manufacturing technologies where applicable., • Collaborate with cross-functional teams to evaluate manufacturability and ensure alignment between engineering intent and production capability., • Utilize ERP systems (NetSuite preferred) to manage process documentation and support real-time operations visibility., • Maintain compliance with ISO 9001 standards; support internal and external audits., • Drive root cause analysis and corrective action using tools like FMEA, SPC, and 8D., • Bachelor’s degree in Mechanical Engineering, Manufacturing Engineering, or related field., • 8–15 years of experience in manufacturing engineering, preferably in modular fabrication, defense, energy, or industrial equipment sectors., • Proficiency in SolidWorks and AutoCAD for 3D modeling, 2D drafting, and tolerance analysis., • Strong working knowledge of Lean Manufacturing, Six Sigma, or similar methodologies., • Experience with ERP/MRP systems (NetSuite a plus)., • Demonstrated success in process development, design for manufacturability, and production scaling., • Hands-on experience with containerization, modular product platforms, and structural weldments., • Knowledge of ISO9001 quality systems and compliance standards., • Exceptional analytical, problem-solving, and project management skills., • Experience in containerized HVAC, power distribution, or control system enclosures., • Familiarity with CNC machining, sheet metal fabrication, and industrial coatings., • Certification in Lean Six Sigma, PMP, or related process improvement disciplines., • This is a full-time onsite position based in Buffalo, NY., • Work takes place in both office and fabrication floor environments., • May require occasional travel to customer sites or GTI facilities., • Must be able to occasionally lift up to 25 lbs and walk fabrication areas. GTI Fabrication is an equal opportunity employer committed to building a diverse and inclusive workplace.

Job Description LaBella is currently hiring for a Senior Structural Engineer in our Buffalo, NY office. The Structures Discipline provides structural engineering services with emphasis on new design, repair and rehabilitation of constructed works, as well as investigation and performance evaluation. Individual must be able to work independently, as well as part of multi-discipline teams. Duties • Serves as a Lead Engineer who supervises a team of structural engineers, designers and technicians in production of structural construction documents including drawings, specifications, bidding and construction administration for large complex projects including calculation and document reviews., • Develops cost effective system layouts as well as performing calculations and coordination with other disciplines., • Performs site visits for documentation and cost estimating of existing systems and building conditions., • Prepares technical specifications., • Reviews and evaluates shop drawings and product submittals., • Visits construction sites to inspect work in progress or completed., • Maintains and manages budgets for projects including hours and resources., • Maintains client relationships, • Prepares Engineering Reports., • Completes complex and specialty types of design., • Stays abreast of technical advancements in respective field and disseminates information to others., • Minimum of 15 years of experience working in the consulting engineering industry., • Strong writing and communication skills., • Demonstrated ability to meet deadlines., • BS in Civil Engineering is required., • A New York State PE license is required., • Revit Experience is a plus., • Project history using computer analysis software experience is essential. Salary Range: $100,000 - $150,000 per year The specific salary offered may be influenced by a variety of factors including but not limited to the candidate's relevant experience, education, and work location. Benefits Body, mind, and wallet—LaBella’s benefits support a holistic approach to your health and wellness, creating the foundation for physical, mental, and financial well-being. Our benefit offerings cover the must-haves (healthcare and retirement), the just-in-cases (insurances and employee assistance programs), and the cherry-on-tops (fitness reimbursements, year-end incentive pay, and tuition assistance). Visit our website for more details on benefits listed below. • Flexible Work Schedule, • Health/Dental Insurance, • 401k Plan with Employer Match, • Short & Long Term Disability, • Profit Sharing, • Paid Time Off, • Leadership Development Program, • Fitness Reimbursement, • Tuition Reimbursement, • Referral Bonus Program, • Wellness Program, • Team Building Events, • Community Service Events

Job Description We are looking for a Tool Engineer to join our growing company. Our customers drive the work we do. We empower our employees to deliver best-in-class service. As part of our team, you are responsible for identifying new methods, resolving problems, achieving cost savings, and working with internal teams to ensure production runs smoothly and safely. Our ideal candidate has a bachelor’s degree in mechanical engineering or a related field, professional experience within a manufacturing and design environment, and strong problem-solving and math skills. Responsibilities: • Manage and resolve tooling problems related to manufacturing, • Coordinate with the plant to resolve safety, quality, throughput, or cost issues related to tooling, • Generate and implement cost savings ideas to reduce tool and manufacturing costs, • Work with the Commodity Manager Customer Service Rep to ensure tool use issues and availability does not interrupt production, • Manage weekly tooling spend against a variable piece cost budget, • Perform and document tool trials, • Revise and update tool drawings and documentation as required, • Develop new systems to recondition and re-use tooling when economically feasible, • Attend regularly scheduled operations and team problem-solving meetings, • Assist the manufacturing team in resolving machining and tooling-related issues relating to costs, scrap rates, and low production rates, • Support cross-functional teams to achieve overall plant metrics, • Recommend optimized machining processes and cutting parameters, • Introduce new technology and improved tooling designs, • Provide year over year Cost per Piece reduction plans, • Coordinate with the preset team on proper tool setup techniques, • Maintain PFEP and use PFEP and Top Spend Data to initiate savings projects, • Utilize the ACD process accordingly, • Adhere to customer safety requirements, • Complete required cost savings and tool test documentation, • Report and document non-conformances, CARs, and continuous improvements, • Maintains safety and good housekeeping standards for the site, • Make decisions within the limits of general standards or procedures, • Report near misses and incidents to the site manager and cooperate with investigations., • Adhere to customer tool test procedures, • Other duties as assigned Requirements: • 5 years of experience working in production machining or a bachelor’s degree in mechanical engineering or experience working in a closely related technical field preferred, • Prior experience designing and tooling parts in a manufacturing environment, • Strong math and problem-solving skills and ability to read blueprints and schematics, • Proficiency with computers, • Able to work with little to no supervision and ability to multitask, • Strong interpersonal, leadership, and organizational skills, • Good written, and oral communication skills, computer, and system knowledge

Job DescriptionTitle: Network Systems Specialist - Backup Administrator Level: Mid-Level Hours: Full-time, 40 hours/week Location: On-site Years of experience: 3-4 Timeline to fill: 2 weeks Estimated start date: March 5, 2026 Overview/Position Summary: Provides a full range of technical services for infrastructure technologies (Servers, SAN) including setup, configuration, implementation, security, system traffic analysis, capacity planning, and daily operations. Manages small projects and responds to system issues. Primary responsibility will be the enterprise backup administrator. Backup Responsibilities: Administer Veeam and Commvault Enterprise Backup platforms. Manages backup schedules to ensure regular and timely data protection. Monitors backup jobs for successful completion and addresses any anomalies. Verifies the integrity of backup data to ensure reliability during restoration. Restores data as needed in response to system failures or user requests. Troubleshoots backup failures and implements corrective actions. Documents backup procedures and maintains logs for audit and compliance purposes. Collaborate with IT teams to ensure backup solutions align with business continuity and disaster recovery plans. Required skills & experience: Hands on administration of enterprise backup and recovery solutions, specifically Commvault and/or Veeam Backup & Replication in production environments Strong understanding of backup methodologies (full, incremental, synthetic full), retention policies, and restore operations (file level, application level, VM level) Experience performing backup monitoring, troubleshooting failed jobs, and executing data restores under SLA pressure Administration experience in virtualized environments, most commonly VMware vSphere and/or Microsoft Hyper V Working knowledge of Windows Server environments and, in many roles, Linux systems used for repositories or hardened backup targets Familiarity with storage technologies including SAN/NAS, disk based repositories, and capacity planning for backup growth Experience supporting disaster recovery objectives, including RTO/RPO alignment, backup verification, and restore testing Ability to maintain backup documentation, operational runbooks, and compliance or audit reporting Exposure to security practices such as patching backup servers, access control, and responding to vulnerability findings related to backup infrastructure 3+ years of experience in backup administration or infrastructure support roles Required Qualifications: 1. Master's degree and the equivalent of two (2) years of full-time experience in computer system hardware, operating systems and software, enterprise networking or computer systems security as it relates to technology used at the organization; or, 2. Bachelor's degree and the equivalent of two (2) years of full-time experience as a Network Technician at; or, 3. Bachelor's degree and the equivalent of four (4) of full-time experience in computer system hardware, operating systems and software, enterprise networking or computer systems security as it relates to technology used at the organization; or, 4. Associates degree and the equivalent of six (6) years of full time experience in computer system hardware, operating systems and software, enterprise networking or computer systems security as it relates to technology used at the organization; or Preferred Qualifications: Advanced experience with Commvault Enterprise environments, including policy design, storage configuration, and reporting Advanced Veeam capabilities such as scale out repositories, replication, and enterprise monitoring tools Commvault Certified Professional (CCP) or equivalent Commvault training credentials Veeam Certified Engineer (VMCE) or higher level Veeam certifications Complementary infrastructure certifications (VMware, Microsoft, or storage focused) are often listed as desirable Experience backing up databases and applications such as SQL Server or Oracle using native or integrated agents Scripting or automation skills (commonly PowerShell or shell scripting) to support reporting, maintenance, or operational efficiency Exposure to hybrid or cloud integrated backup architectures, especially where backup data is tiered to object storage Strong problem solving and analytical skills for root cause analysis of backup failures and performance issues Ability to communicate clearly with infrastructure, application, security, and audit teams during incidents or compliance reviews #ZR

Job DescriptionJob Title: Cybersecurity EngineerLocation: Buffalo, NYHire Type: ContingentPay Range: $46.64 - 77.74 /hourWork Type: Full-timeWork Model: HybridWork Schedule: Monday – Friday, 8am – 5pm Recruiter Contact: Sean Pebbles, & Scope:Positional OverviewThe Imagine Group is recruiting for a Cybersecurity Engineer on behalf of our client, a leading financial institution headquartered in Buffalo, New York, serving individuals, businesses, and communities across the eastern United States. Known for its strong regional presence, commitment to community engagement, and focus on long-term customer relationships, the organization offers a stable and collaborative work environment with opportunities for growth.In this role, you will be responsible for designing and implementing small-scale security systems and solutions to develop or enhance new or existing security solutions, solving basic to moderate problems or enhancements. Completes day-to-day support activities and special projects.Role & Responsibility:Tasks That Will Lead to Your Success • Design components of security solutions with moderate complexity and risk, ensuring alignment with cybersecurity objectives and organizational needs., • Configure security features for security tools with guidance from more senior engineers, to ensure systems align with cybersecurity objectives., • Conduct functional testing of security systems and configurations, reporting findings to more senior engineers to align appropriate actions to take., • Deploy security systems and code for moderately complex initiatives, with guidance from more senior engineers., • Identify and implement tuning to security systems to enhance effectiveness of systems and configuration., • Automate security systems' installation, configuration, and processes to reduce manual effort on repetitive tasks., • Collaborate across Cybersecurity organizations and with key Technology partners to integrate security solutions., • Identify areas of opportunities in daily tasks to improve security solutions and seek opportunities to learn new technologies and methodologies., • Communicate with vendors by collecting and providing relevant data to contribute to troubleshooting processes., • Understand and adhere to the Company’s risk and regulatory standards, policies, and controls in accordance with the Company’s Risk Appetite. Design, implement, maintain, and enhance internal controls to mitigate risk on an ongoing basis. Identify risk-related issues needing escalation to management., • Promote an environment that supports belonging and reflects the brand., • Maintain internal control standards, including timely implementation of internal and external audit points together with any issues raised by external regulators as applicable., • Complete other related duties as assigned.Skills & ExperienceQualifications That Will Help You Thrive, • Combined minimum of 5 years higher education and/or work experience in systems design, management and/or architecture., • 5+ years of experience with Proxy, Active Directory, AD Reporting, GPO, and File System technology.

Job Description Allient Inc. is in growth mode and currently seeking a Staff Analysis Engineer to join our team at our corporate innovation center and headquarters located in Buffalo, New York! The Staff Analysis Engineer leads modeling, simulation, and quantitative analysis of electromechanical systems—including motors, drives, gears, actuators, and motion mechanisms. This role requires deep experience with MATLAB and Simscape for dynamic system, thermal, and power-flow analysis. Apply now! Responsibilities: • Perform advanced analysis across electrical, mechanical, software, and actuation systems., • Use modeling and simulation to define and validate system requirements, performance, reliability, and safety., • Develop test plans and correlate test data with models., • Conduct subsystem testing and support system/vehicle integration., • Apply innovative engineering solutions to enhance product performance., • Review designs and ensure adherence to best practices., • Work with internal teams and customers to define requirements and present technical results., • Improve standard engineering processes and documentation., • Mentor engineers at multiple experience levels., • Support proposals through technical definitions, trade studies, and compliance activities., • Some limited travel may be required (15% typical), • Master’s degree in electrical, mechanical, or aerospace engineering with 9+ years of experience (or bachelor’s with 11+ years)., • Extensive experience using MATLAB and Simscape for dynamic, thermal, and power-flow analysis., • Demonstrated ability to lead cross-disciplinary engineering efforts., • Preferred: FEA/CFD experience (Ansys), knowledge of electric/hybrid propulsion systems, and experience with actuation technologies (motors, gearing, ball screws, DC motor drives)., • Preferred: Experience with military programs, government contracting, ITAR, and working with primes or Tier 1 suppliers. Don't let this opportunity pass you by - APPLY TODAY! To learn more about Allient Inc. visit Allient Inc. provides equal employment opportunities to all employees and applicants for employment and prohibits discrimination and harassment of any type without regard to race, color, religion, age, sex, national origin, disability status, genetics, protected veteran status, sexual orientation, gender identity or expression, or any other characteristic protected by federal, state, or local laws. This applies to all terms and conditions of employment, including recruiting, hiring, placement, promotion, termination, layoff, recall, transfer, leaves of absence, compensation, and training.

Job Description STRUCTURAL BUILDING SYSTEMS ENGINEER (BSE) II As a Building Systems Engineer, you are responsible for the design of building systems for projects across our practice areas, elevating their capabilities and creating a more sustainable world in the process. You would be part of a team whose structural engineering services are grounded in the use of advanced engineering techniques, diverse material selection and sustainability measures. What You'll Do • Conduct code research in support of project development, • Research and apply current technology and stay abreast of new and upcoming technologies, • Analyzes reports, drawings, etc. to plan and design a project., • Execute design calculations and quantity/cost estimates for buildings., • Develop and prepare project specifications for structural building projects., • Research code issues and develop educated strategies to satisfy code requirements. What You Bring to the Table Must Have: • Bachelor’s degree in Civil Engineering or a related field, • A minimum of eight (8) years of structural engineering experience, • AutoCAD/Revit experience, • Design program experience such as Enercalc, RISA, Bentley Structural System or equivalent required, • Professional Licensure, • Ability to interact effectively across organizational boundaries to achieve goals and meet deadlines What You'll Be Part Of As the Building Systems Engineer, you will be part of a team that provides mindful structural design for clients in healthcare, K-12 education, higher education, communities, municipalities, industrial sectors and more. What We Offer: CPL cares about your future with us! That’s why we offer the following benefits to you and your family: • Internal Mobility & Career Advancement, • Healthcare for you and your family including spouse coverage: Medical, Dental, Vision & Prescription insurances. Single Plans with 100% paid premium, • Flexible Time Off + 8 Holidays a year, • Retirement Savings Plan - Contribution from CPL to grow your retirement funds., • Tuition Assistance: You may be eligible for continuing education assistance., • Student Loan Assistance Program: CPL will contribute up to a maximum of $100 a month for 5 years ($6,000 total) towards student loan debt., • Licensure Assistance, • Long-Term Disability Insurance Company/team member premium sharing, • Flexible Spending Account $5,000 dependent childcare annually paid 100% by team member pre-taxes., • FREE Life Insurance and AD+D Insurance, • Voluntary Short-Term Disability Insurance WHAT DOES IT LOOK LIKE WORKING HERE? We believe that building a strong community is about establishing a prevailing sense of fellowship among our team members, friends, and neighbors. • Collaboration – working with others towards the best solution, placing great emphasis on the collective wisdom of our internal teams., • Family – celebrating others’ successes, genuinely caring about the happiness and well-being of our team members and recognizing their own families as extensions of the CPL family., • Fun – not taking oneself too seriously, fully understanding that fun at work is conducive to productivity., • Inspiration – contributing to an uplifting workplace that facilitates growth and success by maintaining a positive, upbeat attitude., • Integrity – doing what is ethically right and providing reliable follow-through on commitments., • Ingenuity – seeking new opportunities and consistently identifying unexpected and practical ways to solve problems. The rate for this position generally ranges between 88K-133K $annually. This range is a good faith estimate provided pursuant to the New York Pay Transparency Law. It is based on what a successful New York applicant might be paid and assumes that the successful candidate will be in New York or perform the position from New York. Similar positions located outside of New York will not necessarily receive the same compensation. Actual pay rates may vary from the range, as permitted by New York Equal Pay Transparency Law. Compensation offers will be based on various factors, including operational needs, individual education, qualifications and experience, work location and comparison to employees already in the role, as well as other considerations permitted by law. A potential new employee's pay history will not be used in compensation decisions. CPL is an Equal Opportunity Employer, and as such affirms the right of every person to participate in all aspects of employment without regard to gender, race, color, religion, national origin, ancestry, age, marital status, sexual orientation, pregnancy, disability, citizenship, military or veteran status, gender expression and/or identity, or any other status or characteristic protected by federal, state, or local law. CPL does not accept unsolicited resumes from recruiting professionals or agencies, nor do we accept resumes from any source that does not reference a specific, open position. CPL will not be responsible for any fees arising from the use of resumes submitted by recruiting professionals or agencies that do not have a current placement fee agreement with CPL. All initial communication with recruiting professionals or agencies must go through our Talent Acquisition Team. What

Job Description Advance your career with the Stark Tech team. We'll shape your future together! Stark Tech is a total optimization provider of facilities and energy solutions. Stark Tech leads the market in providing cutting-edge facilities and energy solutions. We integrate systems, offer energy-efficient equipment and services, and provide building analytics to help customers meet sustainability goals. Our large-scale equipment converts waste to renewable natural gas, reducing greenhouse gas emissions. Additionally, we enhance the utility grid with microgrid and battery energy storage solutions, along with solar development consulting services. Join Stark Tech to be part of the future of energy transformation. What you can expect We believe your well-being and satisfaction are vital for a fulfilling career. We are gritty, employee, and customer-focused. Here are some of the benefits we provide: • Paid Time Off & Holidays, • 401(k) with employer match, • Medical/Dental/Vision insurance, • Health Savings Account (HSA) and Flexible Spending Account (FSA), • HSA employer contribution, • Life and Disability insurance, • Wellness Program (participation incentives), • Employee Assistance Program, • Competitive pay The Controls Engineer is responsible for the implementation of industrial controls systems for RNG plants and related skid systems utilizing PLC's, SCADA and HMI software to meet project and customer requirements. This includes both hardware selection and implementation and related programming. Familiarity with controls, electrical power systems, field devices, operations, network configurations, and industrial communications protocols are required. What are we looking for • Bachelors degree in electrical engineering or a related engineering field required. Additional experience will be considered in lieu of degree., • 1 year of related experience in control system design., • General knowledge of rotating equipment such as pumps, compressors and motors., • General knowledge of AC/DC electrical systems and components such as VFD's, power supplies, relay logic, etc., • Experience troubleshooting automated machine systems, components, and electrical devices using test equipment. Our fast-growing organization offers competitive pay, a positive work environment, and opportunities for career growth within the company. If you're a motivated individual with a sense of accountability, resiliency, and a dedication to providing exceptional customer service, we encourage you to get in touch with us. The advertised compensation range for this position represents what we believe, at the time of posting, to be competitive and acceptable by reviewing comprehensive market data to include industry, and roles of similar responsibility and level. Within the range, wage will be determined by several factors including candidate knowledge, job-related skills, experience, and relevant education or training. Job Posted by ApplicantPro

Job DescriptionJob Title: Software Engineer IIILocation: Buffalo, NYHire Type: Contingent Pay Range: $53.20 - $88.65Work Model: HybridContact Email: No C2C, C2H, 1099 or Visa Sponsorship/Transfer available Nature & Scope:Positional OverviewAre you a talented software engineer looking for a dynamic and innovative work environment where your skills and creativity can truly shine? Join our client’s forward-thinking team, where they are committed to pushing the boundaries of technology and delivering cutting-edge solutions. You'll have the opportunity to work on exciting projects, collaborate with a group of passionate and skilled professionals, and make a tangible impact in a rapidly evolving industry. Apply now to be a part of a company that not only values your expertise but also empowers you to achieve your full potential! Role & Responsibility:Tasks That Will Lead To Your Success • System Architecture & Technical Design, • Own and define the overall architecture of the application., • Choose technology stack components: database, messaging, caching, API gateway, security framework, etc., • Design APIs (RESTful, possibly GraphQL) with scalability, consistency, and security in mind., • Create architectural decision records (ADRs) to document and justify key technical decisions. 2. Hands-on Development, • Write high-quality, production-grade code using Java + Spring Boot., • Set up and structure the initial codebase using best practices (layered architecture, DTOs, config management)., • Build CI/CD-friendly microservices or modular monoliths depending on architecture choice., • Lead the development of MVP components, defining reusable patterns and common services. 3. DevOps & Deployment Strategy, • Work closely with DevOps to define a deployment pipeline (Docker + Jenkins/GitHub Actions + Helm/Kubernetes preferred)., • Own environment configurations (dev, QA, staging, prod) and secrets management., • Ensure proper logging, health checks, metrics, and monitoring are integrated from the start (e.g., Prometheus + Grafana, ELK stack). 4. Team Leadership & Collaboration, • Establish coding standards, code review practices, and version control strategies (e.g., GitFlow)., • Mentor junior engineers and support onboarding of future team members., • Collaborate with Product Owners, UX, and QA to refine requirements and deliver high-quality features., • Act as the technical face of the team in architecture discussions, demos, and stakeholder meetings. 5. Security & Compliance, • Define and implement authentication (OAuth2, JWT, or enterprise SSO)., • Ensure data security, secure endpoints, and follow secure coding practices., • Be proactive in identifying security vulnerabilities and remediating them (OWASP awareness is expected). 6. Documentation & Knowledge Transfer Skills & Experience:Qualifications That Will Help You Thrive, • Minimum of an Associates degree and 6 years systems analysis/application development experience, or in lieu of a degree, a combined minimum of 8 years higher education and/or work experience, including a minimum of 6 years systems analysis/application development experience., • Minimum 6 years of Java/Spring Boot experience., • Experience with OpenShift., • Strong experience in the Spring framework, • REST API experience., • Capable of working on multiple projects of a complex nature., • Excellent problem-solving skills to assist in issue resolution., • Strong verbal and written communication skills, with prior experience presenting to the target audience.

Job DescriptionSalary: 75000-85000 Project Engineer - Electrical Position Summary: In support of the Companys primary and single most important objective, which isTO GET AND KEEP PROFITABLE CUSTOMERS, this individual is responsible for the design of low voltage power distribution, motor control, PLC control, and network design aspects of SAMCO's custom water, wastewater, and process separation solutions for industry. Successes of the position are measured via the following key indicators: • Timely and accurate completion of electrical designs for projects, • Successful coordination of design efforts with process engineering and programming teams, • Compliance with safety and regulatory standards, including NFPA 70, NFPA 79, and UL 508A, • Development of one-line diagrams and network architecture, • Specification of control hardware, including PLC components, HMIs, VFDs, and network components, • Creation of PLC-based control panel and low voltage motor starter panel wiring schematics, panel layout drawings, and bills of materials, either directly or by supervision of in-house or outsourced design resources, • Raceway/cable sizing and routing, • Coordination with project process engineering and programming teams to provide a complete and functional system, • Support purchasing and manufacturing activities related to panel and assembly construction, • Perform or support factory acceptance testing and troubleshooting, • Support field service team during system commissioning and startup, which may include remote or on-site work, • Development and refinement of SAMCO standards and documentation of best practices related to electrical and control system design, • Bachelors degree in Electrical Engineering or related field, • Minimum of 1 year of experience in electrical engineering, • Proficiency in schematic drafting with AutoCAD (or equivalent), • Strong knowledge of motor power and control circuit design, • Expertise in PLC-based control hardware specification and power/control/signal circuit design, • Experience in industrial networking design and specification (Ethernet, Profinet), • Familiarity with the application of NFPA 70, NFPA 79, and UL 508A to process equipment control systems, • Hands-on experience with wiring, testing, and troubleshooting low voltage power and control wiring for process systems, • Experience with PLC program troubleshooting and development, • Standard office environment, • Field construction environment, • Standard physical requirements for a typical office environment, • Field/in-plant physical activities (e.g., climbing, lifting, standing, and walking continually), • Hearing and visual acuity necessary to be aware of and manage safety hazards and environmental issues in the manufacturing and field settings

Job Description Overview CTG is seeking to fill a Senior Technical Engineer(DevOps) opening for our client in Buffalo, NY. Location: Buffalo, NY Duration: 15 months Must have experience: Terraform, Ansible, Azure, Git. Overview: The Senior Technical Engineer will provide high-level technical solutions, designs, documentation, and guidance for the development and deployment of new or existing technical solutions. This role demands an expert-level aptitude in system architecture and infrastructure design, with a focus on meeting the evolving needs of the organization. Primary Responsibilities: • Collaborate with technology management, customers, and support teams to design, develop, and execute technical solutions., • Lead infrastructure architecture and design efforts, including research and development of new systems., • Create technology standards and policies, analyze user requirements, and conduct thorough system testing., • Engage regularly with business partners to clarify problems/opportunities and gather business requirements., • Estimate project efforts for complex, moderate to large-scale projects., • Manage vendor interactions and contract resources as needed., • Mentor and coach less experienced engineers and technicians, reviewing their documentation and proposals., • Continuously expand knowledge of Financial Services trends and technologies., • Promote and adhere to industry best practices and standards., • Maintain expert-level knowledge of supporting applications and development environments., • Assist in budget development for expenses and capital projects., • Identify and escalate risk-related issues in accordance with the company’s standards., • Foster a diverse work environment that reflects the company brand., • Ensure compliance with internal control standards and address audit points as required. Supervisory/Managerial Responsibilities: Not Applicable. Education and Experience Required: • Combined minimum of 12 years of higher education and/or work experience in systems design, management, and/or architecture., • Bachelor’s degree in Computer Science or Computer Engineering., • Minimum of 12 years of advanced experience in a technical engineering role focusing on infrastructure design, data management, and system development for complex applications., • Proven ability to translate complex requirements into high-quality implementations., • Strong problem-solving and troubleshooting skills, with the ability to develop alternative solutions., • Experience with project estimation and budget planning. CTG does not accept unsolicited resumes from headhunters, recruitment agencies, or fee-based recruitment services for this role. To Apply: To be considered, please apply directly to this requisition using the link provided. For additional information, please contact Recruiter Anisha Muralidhar at . Kindly forward this to any other interested parties. Thank you!

Job Description PCI Systems Engineer (Tech Ops) Are you a problem-solver who thrives on designing and supporting robust systems infrastructure? Join our team as a Systems Engineer and play a key role in shaping the backbone of mission-critical technologies. If you're ready to take on meaningful challenges, collaborate with talented peers, and make a measurable impact—this is the role for you. About PCI: PCI () is a rapidly growing technology company dedicated to providing innovative IT solutions that empower businesses to thrive in the digital age. We foster a culture that values individual contributions, open communication, and a close-knit team environment. At PCI, we are committed to pursuing excellence, unlocking human potential, and building strong relationships with our clients and employees. PCI’s commitment to you: As part of the Technical Operations team, you will design, develop, support, and maintain the organization's hosted systems infrastructure including client-facing assistance to define requirements and recommend technical solutions to help move the client’s technology forward. You will develop, modify, test, and maintain the systems and make updates to system-related installation documentation. This role serves as a point of escalation for System Administration team for outages, issues and or change management support. Work is generally both independent and collaborative in nature and contributes to moderately complex aspects of a project. You might be a great fit if you have experience with: • Working directly with clients for evaluation, technical discovery, and solution recommendations. Such as leading discovery sessions to assess infrastructure needs and proposing tailored cloud migration strategies., • Azure Cloud technology stack: Deploying Azure Virtual Networks, configuring NSGs, and managing Azure AD-integrated services., • Azure and on-prem networking: Designing hybrid network topologies, configuring VPN gateways, and troubleshooting routing between cloud and on-prem resources., • On-premises infrastructure design and implementation: Building Hyper-V clusters, deploying Windows Server roles, and integrating with cloud services., • Various SAN technologies: (NetApp, Nimble, TruStorage), • Backup technologies — both physical and cloud-based: Managing Veeam and Barracuda for on-prem backup, configuring Azure Backup and Recovery Services Vaults, and ensuring compliance with retention policies and disaster recovery plans., • IT service delivery: Working within queue(s), familiarity with Autotask PSA, Kaseya RMM, and Auvik Network Monitoring preferred. Additional skills we value: • Mid-level networking expertise: Diagnosing VLAN and subnet issues, configuring DHCP scopes, and managing firewall rules for secure access., • Experience supporting remote user environments: Troubleshooting VPN connectivity, deploying remote desktop solutions, and managing endpoint security for distributed teams., • Familiarity with network monitoring and diagnostic tools: Using Wireshark or PRTG to identify latency issues or unauthorized traffic., • Comfort with cloud identity and access troubleshooting: Resolving Azure AD sign-in issues, MFA lockouts, and conditional access misconfigurations., • Microsoft modern workplace solution (Intune, Teams, Exchange Online, SharePoint Online): Implementing Intune compliance policies, managing Teams lifecycle, and configuring Exchange Online mail flow. Requirements: • 2-year technical degree or equivalent work experience., • Strong listening and communication skills with a friendly customer-focused attitude, as this role will have direct client interaction both virtually and in person at on-site client locations., • Prior Enterprise MSP experience highly valued. Certifications Preferred: AZ-104, AZ-302, AZ-304, AZ-305, AZ-500, all M365 certifications. FLSA Category - Exempt, full-time Supervisory Responsibility – No Location – Buffalo, NY (Hybrid - M/W/F in office) Other Expectations – After-hours support when needed. Compensation: $85,000 -$110,000 annual salary Monday - Friday, 8am - 5pm ET. After-hours support when needed.

Job Description Inter Technologies Corporation (ITC) provides expert audio-visual integration services. Our adaptable structure enables us to complete and provide follow-on support for large-scale installations throughout the United States, Canada, and Mexico. ITC is a rapidly growing and evolving family-owned and operated business and we need you to join our growing family and client list! Title: Field AV Engineer Department: Operations Reports To: Vice President of Customer Success Position purpose and objective: This position is responsible and accountable for directing, installing, programming, commissioning and trouble-shooting the electronic, hardware, and wiring components of audio-visual systems according to company standards. This position reports to the Vice President of Customer Success and is a member of the Operations team supporting the mission and goals of a "Best in Class" sales and AV integration program. As an operational member of a dynamic audio-visual integration operation, the Field AV Engineer will be responsible for loading AV Control Code, GUI, and DSP configurations. After installation is complete, travel to customers’ sites is required to configure devices, load control code, test and commission and close-out projects in compliance with the company’s policies and procedures, including quality, safety, environmental, and business practices. Key Responsibilities – Responsibilities include but are not limited to the following. Additional responsibilities are expected to be performed as assigned. 1. System Installation & Integration • Install, terminate, and test AV cabling, including fiber optics, HDMI, Cat6, and speaker wiring., • Mount and configure projectors, displays, video walls, microphones, speakers, and AV control systems., • Integrate and program AV control systems (Crestron, Extron, AMX, QSC, etc.)., • Ensure equipment is installed per project documentation, including signal flow diagrams and system schematics., • Collaborate with network engineers to integrate AV equipment with IT infrastructure. 2. Testing & Troubleshooting • Perform system commissioning, ensuring proper calibration and functionality of audio and video systems., • Conduct signal flow verification, EQ adjustments, gain staging, and network-based troubleshooting., • Diagnose and resolve issues related to hardware, software, and networking., • Provide on-site or remote support for escalated service issues. 3. Client Interaction & Documentation • Serve as an on-site liaison with clients, providing training and guidance on AV system operation., • Document system configurations, wiring diagrams, and punch lists for project completion., • Maintain service logs, test reports, and installation notes in project documentation platforms., • Assist in creating end-user guides and training materials. 4. Compliance & Safety • Adhere to OSHA and company safety policies when working on-site., • Follow industry best practices and manufacture guidelines for AV installations., • Ensure all installed equipment meets compliance standards (ADA, NEC, NFPA, etc.). 5. Project Coordination & Team Collaboration • Work closely with project managers to ensure deadlines and project milestones are met. Education: Associate’s or Bachelor’s degree in AV Technology, Electrical Engineering, IT, or a related field Certifications: CTS and CTS-I Certification. Additional certifications (Crestron, Extron, Dante, Biamp, QSC) preferred. Experience: 3+ years of hands-on experience in AV installation, programming, and commissioning. Technical Skills: • Proficiency in AV networking, signal flow, and troubleshooting., • Experience with AV control system programming (Crestron, AMX, Extron). Physical Requirements: Ability to lift 50+ lbs and work at heights. Success Factors: The personal characteristics that make an individual successful in this industry include: Client-First Mindset – Deliver top-tier AV solutions with professionalism, clear communication, and attention to detail. Problem-Solver Mentality – Troubleshoot issues efficiently, think on your feet, and adapt to evolving technology. Team Player – Support colleagues, share knowledge, and collaborate for seamless project execution. Ownership & Accountability – Take full responsibility for your work, ensuring high-quality results without excuses. Continuous Learning – Stay updated on industry trends, certifications, and best practices to refine your expertise. Adaptability & Flexibility – Be ready for changing schedules and diverse project environments. Safety & Precision – Follow protocols, prioritize job-site safety, and execute installations with meticulous attention to detail. Strong Communication – Keep clients, project managers, and technicians informed for smooth operations. Professionalism & Integrity – Respect the technology, team, and clients by maintaining a high standard of conduct. Passion & Positive Attitude – Bring energy, enthusiasm, and a problem-solving approach to every job. Job offer consists of a competitive salary and benefits package that includes: • Paid vacation and sick pay, • Medical coverage options: health, vision and dental, • Generous daily per diem while traveling overnight to cover meals and non-reimbursable incidentals, • In-house travel team to make all work-related travel arrangements including air flights, ground transportation and lodging all paid through company accounts, • 401k program after one year of service and with employer contribution after one year of enrollment Pay: $85,000 - $110,000 yearly salary or commensurate with experience Job Location: Primarily servicing clients in the Buffalo region and *Benefits listed are a highlight of what are offered to full-time, salaried and hourly employees and are subject to change. The ADA prohibits discrimination against qualified individuals with disabilities. To determine whether an individual is qualified, the essential functions of each job should be identified. Essential job functions are those that are intrinsic to the position, and the individual who holds the job must be able to perform with or without reasonable accommodation. PI4e0a5d454cfa-25405-39539610

Job Description Job Title: Roadway Worker In Charge (RWIC) Location: Buffalo, NY Job Type: Full-Time and Part-Time FLSA Status: Hourly; Non-Exempt Reports To: District Manager Travel: Yes, travel is expected for this position (50% - 85% on average). Supervisory Responsibility: No Compensation: Negotiable, based on skills and experience. Company Profile: National Railroad Safety Services, Inc. (NRSS) is a certified DBE/WBE firm primarily focused on providing safety services to the railroad industry. NRSS is the most trusted name in the railroad industry for providing qualified field safety staff and safety training. To best serve the railroad industry, NRSS provides all of these services in the continental United States, Canada, and Mexico. NRSS has the proven ability and the proven safety record to handle any project. Find the safety you have been missing today! Job Description: National Railroad Safety Services, Inc. (NRSS) is seeking a Roadway Worker In Charge (RWIC) to support railroad flagging services for Class 1 Railroads, Regional Short Lines, Transit Systems, State DOT's, as well as Railroad Suppliers, Contractors, and Consultants alike. Required Education: High School Diploma or Equivalent. Required Experience: Minimum 2 years of experience with a Class 1 Railroad, Regional Short Line, Transit System, State DOT Rail Division, Railroad Supplier, Railroad Contractor, and/or Railroad Consultant; preferably within the Maintenance Of Way (MOW) Department. Key Success Factors: • Accountability: Accept full responsibility for self and contribution as a team member., • Adaptability & Flexibility: Ability to consider a variety of issues that exist in the work place and change from one task to another as necessary., • Analytical Thinking: Ability to analyze and synthesize information to understand issues, identify options, and support sound decision making., • Attention to Detail: Ability to work in a conscientious, consistent, thorough manner, and attend to details while pursuing quality when accomplishing tasks., • Communication: Ability to clearly convey information and ideas through a variety of media to employees/clients in a clear and succinct manner., • Customer Service Focus: Ability to provide service excellence to internal and/or external clients., • Decision Making: Ability to identify/understand issues, problems, opportunities and take appropriate action based on available facts, constraints, and probable consequences., • Initiative: Ability to identify what needs to be done and take action before being asked., • Innovativeness: Ability to devise new plans for quality excellence., • Knowledge: Ability to navigate various rulebooks and/or regulations and demonstrate mastery., • Organization: Ability to maintain materials and/or records in a clean and ordered manner., • Planning: Ability to plan and prioritize work load to manage time effectively and accomplish assigned tasks., • Stress Tolerance: Ability to maintain stable performance under pressure or opposition (such as time pressure or job ambiguity)., • Teamwork: Promote cooperation and commitment within a team environment to achieve goals and deliverables., • Proficient computer skills in basic email, phone, and text message applications., • Proficient computer skills in Android OS; on tablet & smart phone., • Proficient computer skills in Citrix Applications., • Strong oral and written communication skills., • Strong technical knowledge in Railroad Engineering, Railroad Design, Railroad Construction, and Safety., • High level of accuracy and attention to detail; well organized., • Demonstrated ability to develop and maintain strong client relationships., • Ability to travel for extended periods of time; sometimes month(s) at a time., • Provide jobsite coordination., • Provide clear and concise communication with Dispatchers, Train Crews, other Railroad Personnel, and/or Contractor personnel., • Provide clear, concise, and thorough job briefings with all personnel on each job site., • Enforce all Railroad, State, and Federal Policies., • Identify rule violations and resolve in accordance with Railroad, State, and Federal Policies., • Enforce Contractor training requirements., • Submit daily field reports detailing Contractor and/or Railroad activities. Physical Demands: The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. • Must be able to hear, speak, read, and write clearly in English., • Must be able to drive long distances and/or travel by other modes as necessary., • Must be able to stand for long periods of time and/or walk on level/uneven ground., • Must be able to see up close, distances, colors and have use of peripheral vision and depth perception., • Must be able to tolerate extreme heat/cold temperatures., • Must be able to tolerate dusty/noisy conditions., • Medical, Dental, Vision, Life Insurance, • Short Term, Long Term Disability Insurance, • Paid Vacation and Holidays Safety Commitment: All employees of all levels are to remain committed to safety at all times while employed at National Railroad Safety Services, Inc. (NRSS). As such, no job is so important and no service is so urgent that we may not take time to perform all work safely. Simply put, safety is our way of life. By placing safety first, we not only ensure the wellbeing of our employees, customers, and communities, but we hold true our commitment to being the leader in safety throughout the Railroad Industry. Closing Statement: National Railroad Safety Services, Inc. (NRSS) is an Equal Opportunity/Affirmative Action Employer. Any candidate selected for this position must be able to successfully pass pre-employment/recurrent background checks, drug/alcohol testing, and classroom training. Job Posted by ApplicantPro

Job Description Preferred Hybrid Work Locations: Williamsville, NY Rochester, NY Syracuse, NY Albany, NY Water Department Manager Join an innovative, multidisciplinary architecture, engineering, energy efficiency, and construction management firm that partners with both private and public organizations to deliver high-performing facilities and infrastructure. This is an opportunity to play a pivotal leadership role in shaping the future of water treatment engineering within a collaborative, forward-thinking environment. About the Role The firm is seeking an experienced Department/Program Manager to lead the Water Treatment Engineering Resource Group. Based in the Williamsville, NY headquarters (or one of the additional New York State offices), this leader will drive excellence across project delivery, technical quality, team performance, and strategic growth. This role sits at the intersection of technical innovation and organizational leadership. You will guide a talented team of engineers, coordinate with water/wastewater division leaders, and ensure the successful execution of complex treatment and storage projects. Key ResponsibilitiesTechnical Leadership * Serve as a technical lead for medium- to large-scale planning, design, and construction projects related to water treatment and storage systems. * Evaluate, diagnose, and implement water treatment process improvements to enhance system performance. * Optimize plant operations across pretreatment, filtration, disinfection, residuals management, energy systems, and storage. * Conduct asset evaluations and support long-term capital planning initiatives. * Perform hydraulic modeling for treatment processes and storage systems. * Provide specialized water expertise to support utility operations during critical or time-sensitive situations. Team & Project Management * Lead, mentor, and develop a team of 510 engineers within the Water Treatment Engineering Resource Group. * Manage team scheduling, resource allocation, deadlines, and quality assurance standards. * Oversee staff training, technical development, coaching, and performance management. * Act as a liaison between technical teams and senior leadership to ensure alignment with organizational goals and project objectives. Client & Business Development * Build and maintain trusted advisor relationships with established water-sector clients. * Support business development efforts by contributing to pursuit strategies and securing new opportunities. * Represent the Water Group within the broader organization, supporting strategic initiatives and cross-disciplinary collaboration. Qualifications * Bachelors degree in Civil, Chemical, Environmental Engineering, or a related discipline. * Current Professional Engineer (PE) license required. * 10+ years of experience in water treatment engineering. * Proficiency in MS Office; working knowledge of CAD/Revit or similar tools. * Valid drivers license and ability to travel to job sites and client meetings (including occasional overnight travel). * Demonstrated leadership capabilities with prior experience managing, mentoring, and developing engineering staff. * Ability to work independently and manage multiple priorities with minimal supervision. What Youll GainWork-Life Balance * Hybrid work options * Flexible scheduling Comprehensive Benefits * Medical, dental, and vision coverage * 401(k) with company match * Paid Time Off (PTO) * Life insurance * HSA and FSA options Career Growth & Support * Career and professional development programs * Tuition reimbursement * Parking reimbursement * Wellness programs and health stipend This is a rare opportunity to influence the direction of a growing water engineering program while contributing to impactful, community-focused infrastructure projects. If you're a motivated leader ready to elevate your career, this position offers the platform, resources, and team to make it happen.

Job Description Desktop Technician will provide day to day local\remote desktop support, receive inbound calls, answer questions, troubleshoot and document steps performed to resolve challenges with hardware, software and application issues in a ticketing system. The candidate will also need to facilitate customer resolution for calls and engage their supervisors and managers to ensure operational consistency across all shifts within the IT Support Center. Desktop Support Engineer provides Break Fix, fault diagnosis and resolution. Providing fault analysis to customer’s various core operating systems and platforms, as well be able to provide support and apply desktop fault resolution for the approved application suite. Ideal candidate should have relevant 2-3 years’ experience in Windows Desktop support. a) Provide first/second level contact and problem resolution for customer issues. b) Work with Third Party Vendors to remediate complex AV issues as needed. c) Provide timely communication on issue status and resolution. d) Maintain ticket updates for all reported incidents. e) Install, upgrade, support and troubleshoot XP, Windows 7, Windows 8.1, Windows 10 and Microsoft Office 2010, Cisco Jabber, another authorized desktop application. f) Should have basic knowledge of Mac operating system, to support Apple pc users. g) Install, upgrade, support and troubleshoot for printers, computer hardware. h) Performs general preventative maintenance tasks on computers, laptops, printers. i) Performs remedial repairs on Desktops, laptops, printers and any other authorized peripheral equipment. j) Use diagnostic tools to troubleshoot problems associated with network connectivity, and workstation hardware/software. k) Broad experience of IT with basic understanding of Networks, Servers, Audio/Visual, Smart Devices and Telecoms. l) This position requires the ability to work in a project-based environment requiring flexibility and teamwork. Performs other duties as assigned. Candidate Required Minimum Qualifications and Skills a) Bachelor’s Degree or equivalent in Computer Science or related field. b) CompTIA A+, Microsoft Certified Professional (MCP) or better. c) Minimum of 18 months years of IT experience. d) Windows 7-10, Microsoft Active Directory, utilization of GPOs, MS Office 365, PC hardware installation and troubleshooting, Enterprise anti-virus solutions, Helpdesk ticketing systems. e) Mobile device management including IOS and Android devices, Enterprise encryption solutions, Windows PC/laptop management via Active Directory. f) Proven analytical, troubleshooting and problem-solving skills. g) Proven ability to multi-task, effectively determine priorities and meet SLA’s. h) Excellent communication relationship-building and internal customer service skills. i) Adaptable and flexible in a fast-changing industry and work environment. j) Willing to work off-hours and weekends when required for projects or emergency support.

Job Description Are you looking for a rewarding career where your contributions truly matter? At Uniland, we offer a culture focused on people, growth, and community. We foster an environment that empowers team members at all levels, supports professional development, encourages volunteerism, and values collaborative innovation - so you can make a meaningful impact while building your future with us. Who we are: Uniland is a leading family-owned and operated real estate development firm headquartered in Amherst, NY. For more than five decades, we’ve built a reputation for excellence in commercial real estate, offering a full range of services including development, construction, leasing, property management, and more. Our commitment to quality, innovation, and long-term relationships sets us apart in the industry. At Uniland, we value integrity, teamwork, and continuous improvement—and we’re proud to offer a workplace where associates can grow their careers while making a lasting impact on the communities we serve. Uniland is a caring employer, offering comprehensive, high-quality benefits to help our associates maintain a healthy, well-balanced lifestyle. Our associates enjoy: • Multiple medical plan options including a high deductible, low-cost HSA health plan with a generous employer contribution, • Company-sponsored (paid) Life Insurance and Long-Term Disability, • Comprehensive optional benefits such as Dental, Vision, Supplemental Life and Short-Term Disability, Legal/ID Protection, and Accident and Critical Illness Insurance, • Paid time off options, 8 paid company holidays, Voluntary Time Off (VTO), bereavement leave, jury duty leave, parental leave, voting leave, and other forms of paid leave as required by applicable law or regulation The AI & Applications Developer is responsible for designing, developing, and maintaining the company’s enterprise applications and automation systems across ERP, Microsoft 365, and custom-built solutions. This position combines traditional software development and ERP administration with emerging AI and automation initiatives to enhance business efficiency, data-driven decision-making, and digital transformation across the organization. The AI & Applications Developer will also serve as the internal subject matter expert on AI tools and integrations, working closely with the Software Engineer to ensure continuity and alignment with company technology goals. ESSENTIAL FUNCTIONS • Administers, configures, and supports the Yardi/ERP system, including custom reports, data import/exports, and integration with other platforms., • Designs, develops, and deploys AI-driven solutions using platforms such as Power Platform, Microsoft Copilot Studio, Azure AI, and other approved automation tools., • Builds automation agents and workflows that support company departments., • Develops internal conversational assistants and task-specific bots while ensuring compliance with AI governance and security protocols., • Partners with business units to analyze processes, identify automation opportunities, and implement scalable solutions., • Maintains documentation of AI models, prompts, workflows, and solution architecture., • Develops and maintains custom applications, web tools, reporting dashboards, and workflow tools that support business operations., • Manages integrations between Yardi/ERP, property management systems, CRM, ADP, SharePoint, and other business platforms., • Builds and maintains APIs, connectors, and data pipelines to ensure accurate, real-time synchronization across systems., • Supports version control, testing, and deployment of new features within the company’s application environment., • Designs and optimizes SharePoint sites, lists, workflows, and document libraries., • Maintains Power Automate flows, security permissions, and cross-department automation solutions., • Develops dashboards, analytics reports, and self-service data tools supporting department reporting., • Maintains data quality standards, troubleshoots discrepancies, and develops automated alerts or workflows for operational issues., • Supports data extraction, transformation, and loading (ETL) processes across systems., • Assists internal stakeholders in identifying technology needs and translating them into technical solutions., • Serves as a subject-matter expert for AI literacy, digital workflows, and technology adoption initiatives., • Assists with onboarding/offboarding technology tasks as needed., • Participates in special IT projects, system upgrades, equipment rollouts, and emergency response support., • Supports technology training initiatives and employee AI/automation upskilling., • Bachelor’s degree in Computer Science, Information Systems, or related field, or equivalent experience., • A minimum of one year’s experience in software, application, or AI development, including exposure to full‑stack development, API integration, and modern AI frameworks., • Familiarity with modern AI frameworks (e.g. OpenAi, Azure AI Services, Copilot Studio)., • Demonstrated experience implementing AI or machine learning tools within business systems or automation platforms., • Strong working knowledge of the Microsoft ecosystem—Power Automate, Power Apps, Power BI, SharePoint, and Microsoft 365 administration., • Hands-on experience with ERP systems, including data management and reporting., • Proficiency with database technologies (SQL Server, data integration tools)., • Strategic and analytical thinker who aligns technology solutions with business goals., • Proven ability to analyze business processes and design technology-based improvements., • Proactive problem solver with strong project management skills., • Adaptable and curious, with a willingness to explore and pilot emerging technologies., • Collaborative and service-oriented mindset with attention to detail and follow-through., • Excellent communication and interpersonal skills, with the ability to collaborate effectively with non-technical staff., • Strong organizational skills with the ability to multitask and prioritize tasks effectively., • Excellent time management skills with a proven ability to meet deadlines., • Detail-oriented with a commitment to delivering high-quality work within established deadlines., • Ability to maintain a high level of professionalism, integrity, and confidentiality in handling confidential company materials., • Ability to work independently and collaboratively as part of a team, demonstrating initiative, flexibility, and a proactive approach to problem-solving., • Strategic thinking, analytical mindset, and problem-solving abilities to address complex project challenges and deliver innovative solutions, with the ability to align development strategies and initiatives with organizational goals and priorities and anticipate future development needs and opportunities., • Ability to remain calm under pressure, prioritize competing demands, and maintain composure in challenging or high-stress situations. The physical demands described here are representative of those that must be met by an associate to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform essential functions. • Extended periods of sitting at a desk or workstation while performing job-related tasks., • Regular use of computers and other office equipment, requiring manual dexterity and visual concentration., • Occasionally required to lift and/or move up to 15 pounds., • Mobility within the office environment to attend meetings, training sessions, or other events., • Ability to communicate with associates, supervisors, and external stakeholders in person, over the phone, or via email., • Office-based environment with standard office equipment and ergonomic furniture., • Exposure to typical office noises such as phone calls, conversations, and office equipment operation., • Work will be performed in an in-office environment. Uniland Development Company is an equal opportunity employer and does not discriminate on the basis of any legally protected status or characteristic. Protected veterans and individuals with disabilities are encouraged to apply.

Job DescriptionJob ProfileJob Title: Technical Engineer IVLocation: Buffalo, NYHire Type: Contingent Pay Range: $53.20 – $88.65/hourWork Model: HybridRecruiter Contact: Brian Fesmire () No C2C, C2H, 1099 or Visa Sponsorship Available Nature & Scope:Positional OverviewAre you a seasoned Splunk Technical Engineer looking for an exciting new challenge? Join our client’s dynamic team where innovation and excellence are at the core of everything we do. They offer a collaborative and stimulating environment where your expertise will drive cutting-edge projects and shape the future of technology. If you're passionate about pushing the boundaries of technology and want to make a significant impact, we want to hear from you. Apply now! Role & Responsibility:Tasks That Will Lead to Your Success • Lead the design and architecture of the bank's SIEM infrastructure, ensuring its effectiveness, scalability, and alignment with industry standards and regulatory requirements, • Implement, configure, and optimize SIEM solutions to collect, correlate, and analyze security event data from various sources, such as network devices, servers, applications, and endpoints, • Develop and maintain SIEM use cases, correlation rules, alerts, and reports to identify and prioritize security incidents and potential threats, • Collaborate with other Cybersecurity and Security Engineering teams to investigate and resolve complex security incidents, conduct root cause analysis and recommending remediation actions, • Stay up to date with the latest security threats, vulnerabilities, and industry trends, and proactively assess their potential impact on the bank's SIEM infrastructure, • Lead SIEM-related projects, including system upgrades, enhancements, and integration with other security tools and technologies, • Provide guidance and mentorship to junior SIEM engineers, promoting knowledge sharing and skill development within the team, • Collaborate with internal stakeholders, such as IT operations, compliance, and risk management, to ensure the Bank's security posture is in line with industry standards and regulatory requirements, • Participate in incident response exercises, tabletop simulations, and other security-related drills to enhance the bank's incident response capabilities, • Responsibilities may include infrastructure architecture and design, research and development of new or expanded systems, creation of technology standards and policies, thorough analysis of user requirements and operational constraints, unit test and system integration, and user acceptance testing, • Regularly and independently interact with business partners of varying associate and management levels to ensure clarity of the problem/opportunity and elicit business requirementsSkills & Experience:Qualifications That Will Help You Thrive, • Minimum Bachelor’s degree in Computer Science or Computer Engineering., • Minimum 8 years advanced experience in a technical engineering position involving infrastructure design technologies, data management and interchange, system design and/or development for complex applications., • 8+ years of experience engineering, architecting and implementing SIEM technologies with Splunk (architecting the environment, parsing data logs and onboarding applications), • Ability to translate complex business/functional requirements into structured high-quality implementations using any variety of industry standard approaches., • Advanced technical, analytical, troubleshooting and problem-solving skills., • Demonstrated ability to develop alternative solutions to complex problems and recommend the best solution to the technology business, and project teams.

Job Description Overview CTG is seeking to fill a Software Engineer II opening for our client in Buffalo, NY. Location: Buffalo, NY Duration: 12 months Overview: The Software Engineer II will provide designs and specify information systems solutions, delivering highly technical direction in the development of both new and existing applications. This role is crucial for addressing basic to complex problems and enhancements, ensuring solutions are technologically sound. The ideal candidate will serve as a principal application designer for major modifications, utilizing analytical and technical skills to evaluate client requirements and processes. Primary Responsibilities: • Oversee and complete systems analysis, design, and development for projects of varying complexity., • Act as a key individual contributor on complex projects, maintaining a strong functional understanding of supported applications., • Direct and mentor less experienced resources, coordinating development tasks for projects ranging from small to large scope., • Prepare and manage the technical components of project plans., • Collaborate with Development, Operations, and Technology teams throughout the systems development lifecycle, from technical analysis to user acceptance testing., • Prepare and execute detailed test plans, including debugging as necessary., • Analyze and understand complex interrelationships among programs, applications, and platforms., • Provide consulting and leadership in identifying and implementing new information technologies to meet business objectives., • Prepare and review thorough technical and functional specifications, as well as systems documentation., • Maintain effective operation and performance of supported applications and recommend new technologies, policies, or processes for improvement., • Adhere to and promote development standards and procedures. Supervisory/Managerial Responsibilities: • Direct and monitor the activities of less experienced personnel., • Minimum of an Associate's degree and 5 years of systems analysis/application development experience; or, in lieu of a degree, a combined minimum of 7 years higher education and/or work experience, including a minimum of 5 years in systems analysis/application development., • ServiceNow Developer or Administrator certification is a must., • ServiceNow Implementation Certification is a must., • Sr. ServiceNow Developer (VR/CC – SecOps)., • ServiceNow Development and Administration of Vulnerability Response (VR) and Configuration Compliance (CC) modules., • Providing architectural, design, configuration/development and operational support for VR and CC., • Prepare and conduct VR and CC and related dependencies updates., • Provide ServiceNow functional and process expertise in building world class programs., • Familiarity with application development software and hardware platforms., • Proficiency with personal computers and relevant project management, word processing, and spreadsheet software., • Strong problem-solving skills, organizational abilities, and attention to detail., • Good understanding of the Bank's application framework., • ServiceNow SecOps implementation certificate is desired but not needed., • Subject matter expert in business with experience utilizing the supported application/system., • Advanced knowledge of applications and integrated systems., • Ability to work collaboratively in a team as well as autonomously. CTG does not accept unsolicited resumes from headhunters, recruitment agencies, or fee-based recruitment services for this role. To Apply: To be considered, please apply directly to this requisition using the link provided. For additional information, please contact the Recruiter Tana Stilloe at . Kindly forward this to any other interested parties. Thank you!

Job DescriptionJob Title: Azure Technical Engineer IIILocation: Buffalo, NYHire Type: ContingentPay Range: $44.99 – $74.98/hourWork Type: Full-timeWork Model: HybridWork Schedule: Monday – Friday, 9am – 5pm Recruiter Contact: Brian Fesmire, C2C, C2H, 1099 or Visa Sponsorship/Transfer available Nature & Scope:Positional OverviewThe Imagine Group is recruiting for a Azure Technical Engineer III on behalf of our client, a leading regional financial services institution in Buffalo, New York. This organization offers a full range of commercial and retail banking solutions, including deposit accounts, lending products, wealth management, and digital banking tools to individuals, businesses, and institutions across the Eastern United States. In this role, you will be responsible for designing, implementing, and maintaining complex technical infrastructure and systems to support scalable, reliable technology solutions that meet evolving business needs. You will also be responsible for troubleshooting and resolving technical issues, collaborating with cross-functional teams and stakeholders to deliver high-quality solutions, and contributing to the development of technical standards and best practices.Role & Responsibility:Tasks That Will Lead to Your Success • Work closely with Technology management, senior Engineers, and support teams on a regular basis to implement and manage the design, development, and execution of technical solutions that meet or exceed current and future needs of the organization., • Responsibilities may include infrastructure architecture and design, research and development of new or expanded systems, creation of technology standards and policies, thorough analysis of user requirements and operational constraints, unit test and system integration, and user acceptance testing., • Regularly and independently interact with business partners of varying associate and management levels to ensure clarity of the problem/opportunity and elicit business requirements., • Coordinate vendor interactions and/or vendor resources as needed., • Mentor and coach less experienced engineers, technicians, and integrators. Review documentation, proposals, and changes proposed by less experienced staff., • Seek to expand knowledge and understanding of Financial Services trends, practices, and technologies on a continuous basis., • Follow and promote use of industry best practices, standards and procedures., • Maintain a strong aptitude and working knowledge of Bank applications, systems, development environments. Maintain a detailed understanding of vendor technologies and services used by the Bank., • Understand and adhere to the Company's risk and regulatory standards, policies and controls in accordance with the Company's Risk Appetite. Identify risk-related issues needing escalation to management., • Promote an environment that supports diversity and reflects the company brand., • Maintain company internal control standards, including timely implementation of internal and external audit points together with any issues raised by external regulators as applicable. Skills & ExperienceQualifications That Will Help You Thrive, • Combined minimum of 6 years higher education and/or work experience in systems design, management and/or architecture., • Strong understanding of the system development and infrastructure lifecycle and architecture, vendor best practices, IT Service Management, and systems design., • Experience with Network Engineering, Microsoft Azure and Aviatrix required

Job Description Overview Are you ready to join a growing team? CTG is seeking to fill a Technical Engineer III opening for our client in Buffalo, NY. Location: Buffalo, NY Duration: 12 months Overview: Serve as an advanced technologist supporting infrastructure, networking, and cloud technologies, delivering solutions that meet current and future business needs. Responsibilities: * Design, implement, and manage technical solutions with minimal supervision. * Review and document infrastructure, system designs, and policies. * Collaborate with business partners to clarify requirements. * Coordinate with vendors and manage vendor resources. * Mentor junior engineers and review their technical work. * Ensure compliance with risk, regulatory, and internal control standards. Required Skills & Experience: * 6+ years combined education/work in systems design, management, or architecture. * Hands-on experience with Microsoft Azure, Aviatrix, and network engineering. * Strong troubleshooting, problem-solving, and analytical skills. * Ability to work independently and collaboratively. * Excellent verbal and written communication skills. Preferred: * Bachelor’s degree in Computer Science or Computer Engineering. * Experience with complex applications, infrastructure design, and virtual/server technologies. Excellent verbal and written English communication skills and the ability to interact professionally with a diverse group are required. CTG does not accept unsolicited resumes from headhunters, recruitment agencies, or fee-based recruitment services for this role. To Apply: To be considered, please apply directly to this requisition using the link provided. For additional information, please contact Jamie Robinson at . Kindly forward this to any other interested parties. Thank you!

Job Summary We are seeking a Senior Electrical RF Test Engineer to design, develop, and sustain automated functional test systems supporting advanced radio products sold to defense customers worldwide. The role focuses heavily on RF test system development and LabVIEW software engineering. This is a hands-on engineering position combining RF hardware knowledge with automated test software expertise. Location : Rochester, New York (Relocation assistance available) Key Responsibilities • Design and develop automated RF functional test systems, • Create LabVIEW applications for radio testing, • Sustain and improve existing test platforms, • Validate RF performance and measurement accuracy, • Integrate test equipment into automated systems, • Support defense customer test requirements Required Qualifications • Bachelor’s degree in Electrical Engineering or related field, • 6+ years relevant experience, • Strong NI LabVIEW and TestStand experience, • RF communication systems knowledge, • Basic networking (TCP/IP) understanding, • Experience with RF test equipment Preferred Skills • Object-Oriented Programming knowledge, • Experience with Git/SVN/JIRA, • RF and baseband measurement expertise, • Familiarity with spectrum/network analyzers, oscilloscopes, power meters

System Engineer Job Duties: Manages and monitors all installed systems and infrastructure for the organization to be in line with company guidelines or SOP (standard operating procedure). Installs,

Staff Software Engineer Remote Job Duties: • Implement and evolve a Data Lake storage system with low latency and high throughput for bulk data ingestion and query • Implement metadata, data governance, security, and acce

Operates, inspects, maintains all boiler, heating, steam hot water, ventilating, water treatment equipment, refrigeration and air conditioning equipment and systems of the hospital and its complex. Class Stationary Engineers license.

System Engineer Job Duties: Manages and monitors all installed systems and infrastructure for the organization to be in line with company guidelines or SOP (standard operating procedure). Installs,

System Engineer Job Duties: Manages and monitors all installed systems and infrastructure for the organization to be in line with company guidelines or SOP (standard operating procedure). Installs,