System engineer jobs in New York, New YorkCreate job alerts

\nJob Description \n Assists physician during radiographic special procedures. Performs diagnostic and special procedure exams. \n Job Responsibility \n \n\n • As primary assistant gains knowledge of both performing the various procedures and has familiarity with the instruments/medications used in order to ensure patient safety.\n, • Adheres to proper sterile technique at all times prior to and during the procedure. Prepares set up trays and patient preparation prior to procedure.\n, • Has primary responsibility for calling time-out prior to start of all procedure or at any point in the procedure when it is required.\n, • Maintains a Flouro log for all procedures.\n, • Familiarity with catheter and guide wire exchange techniques as well as arterial and venous access.\n, • Strong knowledge of the usage of different catheter, guide wire, sheaths, contrasts, carbon dioxide and injector setup.\n, • Knowledge of various exams and different types of supply set up needed ex. biopsy, drainage, run-off, angioplasty, etc.\n, • Performs proper patient positioning during various stages of an examination.\n, • Knowledge of what parts of the procedure are to be imaged and can manipulate images after procedure to provide optimal imaging.\n, • Knowledge of and can assist in wound care and dressing related to interventional procedures.\n, • Interacts with patients on a professional and compassionate level before, during and after the procedure.\n, • Displays knowledge of all contrast agents, their indications and contraindications.\n, • Exhibits strong communication skills with fellow technologist, nurses and doctors throughout the institution.\n, • Selects proper technical factors relative to procedure, patients size and condition.\n, • Recognizes equipment failure troubleshoots basic problems. Notifies appropriate service engineer and management staff.\n, • Maintains and expedites patient turnover (request transport, call environmental and informs MD of the next patient in a timely fashion). Maintains work area in a clean and orderly fashion.\n, • Works with billing clerk to ensure proper billing for supplies.\n, • Maintains logbook for all procedures performed and can file and retrieve from all storage devices.\n, • Knowledge of all aspects of patient scheduling, can schedule a patient when necessary.\n, • Observes departmental radiation safety procedures to maintain occupational exposure as low as reasonably achievable (ALARA)\n, • Demonstrates the ability to obtain information and interpret information in terms of the patients needs as appropriate to the ages of the patients served.\n, • Demonstrates the ability to work in a dynamic atmosphere sometimes involving a stressful and strenuous situation.\n, • Demonstrates a thorough knowledge of vascular anatomy.\n, • Demonstrates the ability to anticipate the needs of the physician during the procedure.\n, • Practice universal precautions with all patients.\n, • Maintains Inventory levels and orders supplies when necessary.\n, • Follows infection control guidelines set by the institution.\n, • Proficient in entering, retrieving and accessing information using the departments RIS system, as well as PACS.\n, • Designates assignments and distributes work to transport staff as necessary.\n, • Transports patients when necessary to expedite examinations and or patient satisfaction.\n, • Interfaces with patient, staff and physicians both within and external to the department to facilitate the improvement of the patient experience in every possible way.\n, • Works continuously to improve Press Ganey scores via patient satisfaction.\n \n\n • Graduate from an accredited Radiologic Technology Program, required.\n, • New York State Department of Health licensure as a Radiologic Technologist, required.\n

Job Description THE ORGANIZATION The Center for Justice Innovation is a nonprofit organization dedicated to advancing community safety and racial justice. Since 1996, we’ve worked alongside communities, courts, and those most directly affected by the justice system to build stronger, healthier, and more equitable neighborhoods. With a team of over 900 staff and an annual budget of $130 million, the Center carries out its mission through three core strategies: • Operating Programs that pilot new ideas and address local challenges;, • Conducting original research to evaluate what works—and what doesn’t; and THE OPPORTUNITY Brooklyn Justice Initiatives (BJI), the largest operating project of the Center, seeks to re-engineer the experience of criminal court in Brooklyn, New York, by providing judges and attorneys meaningful alternatives to bail, fines, and jail sentences. Operating out of Kings County Criminal Court and community-based offices, BJI is a team of social service providers, court-based resource coordinators, mental health practitioners, compliance specialists, and others who seek to improve the quality of justice. Supervised Release offers an alternative to jail by providing pretrial supervision, case management, and voluntary social services to people charged with misdemeanor and felony offenses, and in doing so, uses an arrest as a window of opportunity to change the direction of a participant’s life, avoiding the harmful effects of incarceration. Program participants are monitored to ensure their appearance at court dates and mandatory programming, and receive referrals to services like job training, drug treatment, and mental health counseling. BJI seeks Case Managers for the borough’s Supervised Release Program (SRP). Reporting to Supervising Case Managers, Case Managers are the front line of service delivery and key to ensuring that the program meets its mandate. Specifically, Case Managers will supervise SRP participants according to their assigned tier and level; work with participants to identify and address barriers to compliance and court attendance; conduct outreach to participants, court stakeholders, community-based service providers, and collateral contacts; connect participants to appropriate services in the community to support their stabilization, and ensure accurate and timely court reporting on participants’ compliance with program requirements. Accurate and timely data entry is a core responsibility for this position. Additionally, Case Managers will co-facilitate pro-social and psycho-educational groups. Responsibilities include but are not limited to: • Provide supervision and court monitoring for SRP participants according to their assigned tier and level by completing check-ins in the specified method and frequency, while treating all participants with dignity and respect;, • Proactively communicate and reinforce program expectations with participants;, • Work with participants to identify and address barriers to compliance with supervision requirements and court attendance;, • Provide comprehensive, clinically-informed case management services by orchestrating internal and external resource allocation and service referrals, • Referrals should align with participants’ needs and goals, including but not limited to substance use, mental health, trauma, intimate partner violence, housing, education, and employment;, • Monitor participants’ compliance with supervision requirements;, • Conduct outreach to participants, their collateral contacts, and defense attorneys to maximize compliance with supervision requirements;, • Maintain accurate and timely data entry and case documentation aligned with the program model, court reporting obligations, and best practices;, • Submit accurate and timely reports to court within designated time frames, including compliance, noncompliance, re-arrest, and mandatory programming court notifications;, • Maintain professional and positive relationships with court staff, judges, and attorneys;, • Co-facilitate pro-social and psycho-educational groups for participants in collaboration with SRP Clinicians;, • Responsible for consistent and effective cross-team communication and collaboration to proactively identify successes, challenges, and opportunities to strengthen programming, create opportunities for meaningful collaboration, and maximize internal and external resources and expertise;, • Participate in individual, group supervision, and regular staff trainings to develop program expertise and related skill sets;, • Attend project events, community events, and meetings after house, as needed;, • Please note that this role is not eligible for clinical hours;, • Bachelor’s degree and two years direct practice experience (e.g., therapeutic or case management) required, or, high school degree or equivalent degree and six years direct practice experience required;, • Experience in pretrial, court-based, or criminal legal system strongly preferred;, • Must be detail-oriented with strong organizational and time management skills;, • Masters degree in Social Work, Mental Health Counseling, Forensic Psychology valued but not required;, • Experience working within a specialized branch of service provision like substance use treatment, mental health services, co-occurring disorders, or adolescent development preferred;, • Experience using trauma-informed and strength-based approaches strongly preferred;, • Must be able to work effectively independently and as part of a highly interdependent, multi-disciplinary team within a fast-paced and dynamic work environment;, • Professional demeanor and ability to work collaboratively and effectively with a variety of program stakeholders, including judges, prosecutors, defense attorneys, court staff, and site partner agencies;, • Openness to work collaboratively with people from diverse backgrounds in a culturally-competent manner; and Position Location: Brooklyn, NY Compensation: The compensation range for this position is $53,050 - $66,800 and is commensurate with experience. Benefits: The Center for Justice Innovation offers an excellent benefits package including comprehensive healthcare with a national network, free basic dental coverage, vision insurance, short-term and long-term disability, life insurance, and flexible spending accounts including commuter FSA. We prioritize mental health care for our staff and offer services like Talkspace and Ginger through our healthcare plans. We offer a 403(b) retirement plan with a two-to-one employer contribution up to 5%. Timeline to Apply: The Center is accepting applications on a rolling basis. We encourage interested applicants to apply as soon as possible. The Center for Justice Innovation is an equal opportunity employer committed to fostering an inclusive and diverse workplace. We do not discriminate based on race, color, religion, gender identity, gender expression, pregnancy, national origin, age, military service eligibility, veteran status, sexual orientation, marital status, disability, or any other category protected by law. We strongly encourage and welcome applications from women, people of color, members of the LGBTQ+ community, and individuals with prior contact with the criminal justice system. Our goal is to create a supportive and respectful environment where everyone, regardless of background or identity, feels valued and included. At this time, the Center is unable to sponsor or take over sponsorship of an employment visa. All applicants must be legally authorized to work in the United States at the time of application and throughout the duration of employment. Candidates are expected to provide accurate and truthful information throughout the hiring process. Any misrepresentation, falsification, or omission of material facts may result in disqualification from consideration, withdrawal of an offer, or termination of employment, regardless of when discovered. In compliance with federal law, all hires must verify their identity and eligibility to work in the United States and complete the required employment verification form upon hire. Please refer to the job posting for relevant contact information. If contact details are not provided, we kindly ask that you refrain from inquiries via phone or email, as only shortlisted candidates will be contacted. Powered by JazzHR JKwJiLtS6B

Job Description THE ORGANIZATION The Center for Justice Innovation is a nonprofit organization dedicated to advancing community safety and racial justice. Since 1996, we’ve worked alongside communities, courts, and those most directly affected by the justice system to build stronger, healthier, and more equitable neighborhoods. With a team of over 900 staff and an annual budget of $130 million, the Center carries out its mission through three core strategies: • Operating Programs that pilot new ideas and address local challenges;, • Conducting original research to evaluate what works—and what doesn’t; and THE OPPORTUNITY Brooklyn Justice Initiatives (BJI), the largest operating project of the Center, seeks to re-engineer the experience of criminal court in Brooklyn, New York, by providing judges and attorneys meaningful alternatives to bail, fines, and jail sentences. Operating out of Kings County Criminal Court and community-based offices, BJI is a team of social service providers, court-based resource coordinators, mental health practitioners, compliance specialists, and others who seek to improve the quality of justice. Supervised Release offers an alternative to jail by providing pretrial supervision, case management, and voluntary social services to people charged with misdemeanor and felony offenses, and in doing so, uses an arrest as a window of opportunity to change the direction of a participant’s life, avoiding the harmful effects of incarceration. Program participants are monitored to ensure their appearance at court dates and mandatory programming, and receive referrals to services like job training, drug treatment, and mental health counseling. BJI seeks a Case Manager for the borough’s Supervised Release Program (SRP) Brownsville/East New York office. Reporting to Supervising Case Manager, Case Manager is the front line of service delivery and key to ensuring that the program meets its mandate. Specifically, the Case Manager will supervise SRP participants according to their assigned tier and level; work with participants to identify and address barriers to compliance and court attendance; conduct outreach to participants, court stakeholders, community-based service providers, and collateral contacts; connect participants to appropriate services in the community to support their stabilization, and ensure accurate and timely court reporting on participants’ compliance with program requirements. Accurate and timely data entry is a core responsibility for this position. Additionally, the Case Manager will co-facilitate pro-social and psycho-educational groups. Please note that this role is not eligible for clinical hours. Responsibilities include but are not limited to: • Provide supervision and court monitoring for SRP participants according to their assigned tier and level by completing check-ins in the specified method and frequency, while treating all participants with dignity and respect;, • Proactively communicate and reinforce program expectations with participants;, • Work with participants to identify and address barriers to compliance with supervision requirements and court attendance;, • Provide comprehensive, clinically-informed case management services by orchestrating internal and external resource allocation and service referrals;, • Referrals should align with participants’ needs and goals, including but not limited to substance use, mental health, trauma, intimate partner violence, housing, education, and employment;, • Monitor participants’ compliance with supervision requirements;, • Conduct outreach to participants, their collateral contacts, and defense attorneys to maximize compliance with supervision requirements;, • Maintain accurate and timely data entry and case documentation aligned with the program model, court reporting obligations, and best practices;, • Submit accurate and timely reports to court within designated time frames, including compliance, noncompliance, re-arrest, and mandatory programming court notifications;, • Maintain professional and positive relationships with court staff, judges, and attorneys;, • Co-facilitate pro-social and psycho-educational groups for participants in collaboration with SRP Clinicians;, • Responsible for consistent and effective cross-team communication and collaboration to proactively identify successes, challenges, and opportunities to strengthen programming, create opportunities for meaningful collaboration, and maximize internal and external resources and expertise;, • Participate in individual, group supervision, and regular staff trainings to develop program expertise and related skill sets;, • Attend project events, community events, and meetings after house, as needed; and, • Bachelor’s degree and two years direct practice experience (e.g., therapeutic or case management) required, or high school degree or equivalent degree and six years direct practice experience required;, • Experience in pretrial, court-based, or criminal legal system strongly preferred;, • Must be detail-oriented with strong organizational and time management skills;, • Masters degree in Social Work, Mental Health Counseling, Forensic Psychology valued but not required;, • Experience working within a specialized branch of service provision like substance use treatment, mental health services, co-occurring disorders, or adolescent development preferred;, • Experience using trauma-informed and strength-based approaches strongly preferred;, • Must be able to work effectively independently and as part of a highly interdependent, multi-disciplinary team within a fast-paced and dynamic work environment;, • Professional demeanor and ability to work collaboratively and effectively with a variety of program stakeholders, including judges, prosecutors, defense attorneys, court staff, and site partner agencies;, • Openness to work collaboratively with people from diverse backgrounds in a culturally-competent manner; and Position Location: Brooklyn, NY (Brownsville/East New York). Compensation: The compensation range for this position is $53,050 - $68,800 and is commensurate with experience. Benefits: The Center for Justice Innovation offers an excellent benefits package including comprehensive healthcare with a national network, free basic dental coverage, vision insurance, short-term and long-term disability, life insurance, and flexible spending accounts including commuter FSA. We prioritize mental health care for our staff and offer services like Talkspace and Ginger through our healthcare plans. We offer a 403(b) retirement plan with a two-to-one employer contribution up to 5%. Timeline to Apply: The Center is accepting applications on a rolling basis. We encourage interested applicants to apply as soon as possible. The Center for Justice Innovation is an equal opportunity employer committed to fostering an inclusive and diverse workplace. We do not discriminate based on race, color, religion, gender identity, gender expression, pregnancy, national origin, age, military service eligibility, veteran status, sexual orientation, marital status, disability, or any other category protected by law. We strongly encourage and welcome applications from women, people of color, members of the LGBTQ+ community, and individuals with prior contact with the criminal justice system. Our goal is to create a supportive and respectful environment where everyone, regardless of background or identity, feels valued and included. At this time, the Center is unable to sponsor or take over sponsorship of an employment visa. All applicants must be legally authorized to work in the United States at the time of application and throughout the duration of employment. Candidates are expected to provide accurate and truthful information throughout the hiring process. Any misrepresentation, falsification, or omission of material facts may result in disqualification from consideration, withdrawal of an offer, or termination of employment, regardless of when discovered. In compliance with federal law, all hires must verify their identity and eligibility to work in the United States and complete the required employment verification form upon hire. Please refer to the job posting for relevant contact information. If contact details are not provided, we kindly ask that you refrain from inquiries via phone or email, as only shortlisted candidates will be contacted. Powered by JazzHR PfbICyT1ZP

Job Description A well-established mechanical contractor in Queens, NY is seeking a motivated HVAC Estimator. The company is looking to build a stronger team and expand. Candidate must possess a high degree of integrity, attitude, written/verbal communication skills, loyalty towards the company and its employees. Our shop is in Queens, NY, most projects are based in NYC/boroughs. The estimator is expected to attend walkthroughs, bid projects of all sizes, and must be able to send bids out with minor review. The successful candidate will have the following skills: The successful candidate will be self-sufficient and estimate plan and spec HVAC projects (must be able to complete your own piping/sheetmetal takeoffs), analyze quotes, compile accurate cost estimates, and prepare proposals/bid forms. Successful candidate must have a working knowledge of HVAC system function/design, sheet metal and piping estimating/sketching/fabricating knowledge and project management skills. Attend Job Walkthroughs/Jobsites/project coordination and owner/contractor/architect/engineer meetings as needed. Ability to work independently to organize and prioritize work. Review bid requests, plans and specifications, etc. to qualify projects for appropriate action, maintain bid lists. Interact with subcontractors and vendors to verify accuracy of proposals. Prepare estimates on multiple projects concurrently. Upon successful bids, you will be involved in managing the office side of the project (prepare submittals, shop drawings, budget/negotiate/purchase/coordinate equipment/materials for projects, create/review change orders, close out documents etc. as needed) until project completion as well as bidding other projects. Work with project team as required. Provide timely constructive feedback to direct supervisor regarding project status, risks, and concerns. Must have working knowledge of all typical computer programs used in this work environment such as Microsoft Windows, MS Office (MS Word, Excel, and Outlook), Dropbox, Google Drive, printing, scanning etc. Complete other duties as assigned. The annual gross base salary range is $70,000-100,000+. Actual salary will vary and are based on factors such as a candidate’s qualifications, skills, and competencies. Must have a valid NY Drivers' license with a clean driving record and will undergo a background check. Must send resume and references. Only candidates under consideration will be contacted.

Job Description Hotel Maintenance Technician (Line Engineer) Pay Rate : $20-$22/hr SUMMARY: Keep all equipment in good repair with a minimum of downtime by providing day-to-day maintenance of the hotel under the direction of Engineering Management. Continually work towards and support the improvement of engineering service to both guests and associates. RESPONSIBILITIES: • Report to work on time and in full uniform., • Train and instruct other members of the staff through sharing of knowledge and skills., • Operate as an independent mechanic by analyzing problems, identifying courses of action, and implementing solutions with available resources and to a high degree of quality., • Keep accurate completion and task records in the project files. Set an example of continuous self-development., • Plunging toilets, unclogging drains, repairing all types of hardware, plumbing, and electrical equipment including lamps, air conditioners and cosmetic items., • Clean, lubricate, protect, and otherwise maintain all tools and equipment in the hotel. See that all tools used are returned to the shop and secured in proper storage area., • To protect and otherwise maintain your assigned tool pouch and its tools at the discretion of the Engineering Management., • Monitor systems as necessary, to be fully informed of the system operation and to handle emergencies involving the systems., • Have a working knowledge of fire sprinkler and emergency power systems. Observe and analyze energy and utilities usage in the hotel and on the grounds., • Look for ways to conserve energy and report any ideas to the Engineering Management., • Be available for any emergencies and act in an engineering capacity to protect our guests and associates, and preserve the building and its systems during the emergency., • To act as quickly and responsibly as possible to return the building to its normal operating status. To inform Engineering Management of any such emergencies., • Be aware of all existing departmental Job Safety Analysis and to strive to work in an accident-free manner and to create a safe work environment for others., • Continuously look for conditions which may endanger associates or guests of the hotel and to take immediate action to correct any hazardous conditions found., • Read, log, track, and interpret readings from meters, gauges, and other measuring units., • Maintain a thorough log of each day’s activities and problems that occur and to ensure this information is passed on to other shifts., • Clean all engineering areas as directed by Engineering Management., • Work in a neat and efficient manner, keeping work areas clean and well organized., • Serve as otherwise directed or needed to help maintain the effective and efficient operation of the hotel at the discretion of Engineering Management or the hotel General Manager., • Complete all work assigned in a safe and professional manner. Maintain communications with supervisors to ensure that all needed materials, tools, and supplies are available or on order., • Follow up on any items that may be on back order. Keep supervisor updated on assignments., • Provide training and technical advice to other engineers as needed or requested., • Maintains a working knowledge of all federal, state, and local laws, codes, and regulations., • Maintains a professional image at all times., • Maintains the hotel facility and related equipment in a safe and efficient manner., • Provides for a safe work environment by following all safety and security procedures and rules., • Reads, learns, understands, and refers to the Standard Operating Procedures., • Each associate will be required to follow the rules as found in the M&R Employee Handbook. Performs other duties as assigned by management, of which employee is capable of performing

Job Description Loews Regency New York Hotel has a legacy of luxury - expertly orchestrated and masterfully performed. Located in midtown Manhattan, the property seamlessly blends its iconic Art Deco design with modern sensibilities, craftily merging form and function to compliment 50 years of service expertise. Welcome to our Park Avenue Allure. Purpose: The Engineering Apprentice program provides real world work experience related to HVAC, electrical, indoor air quality, and controls. The apprentice will assist in the general maintenance and painting in the building and completion of all maintenance requests. Essential Functions and Responsibilities: • Performs general repairs and maintenance work., • Provides assistance to senior engineers., • Responds to Meeting Room, Guest Room, Food & Beverage Outlet, Public Space, and Back of the house maintenance requests., • Reviews and completes daily complaint log., • Performs work as dispatched by HotSOS or other system., • Expedites light bulb replacement program., • Maintains and stocks supplies and tools in storerooms on floors., • Assists guests with any requests., • Communicates status of maintenance requests to supervisor/manager., • Cleans engineering shop., • Follows up all maintenance requests as directed by Chief Engineer or supervisor, • Communicates daily with Chief Engineer or supervisor on status of maintenance/repair assignments., • Ensures that the hotel's building systems are operating safely, economically and efficiently., • Follows proper hotel standards while engaging in repairs in occupied guest rooms or guest areas., • Assists the Chief Engineer in ensuring that all hotel systems meet the standards established by local, state and federal regulating agencies., • Informs Chief Engineer of any repair problems that may arise during their shift., • Has basic knowledge of hotel's plumbing, heating/boiler, electrical, refrigeration, air conditioning, fire safety, sprinkler, lighting and communication systems., • Assists Chief Engineer in floor/room inspections., • Helps monitor energy consumption and waste., • Maintains equipment and supplies., • Use tools safely and correctly., • Check clipboard and daily assignment sheet for job assignments., • Completely familiar with Hotel Emergency procedures and able to respond quickly and accurately during an actual emergency, to notify all appropriate personnel., • Notifies immediate supervisors promptly and fully of all problems or unusual matters of significance., • Is polite, friendly, and helpful to the guests, management, and fellow employees., • Attends all appropriate hotel meetings and training sessions., • Maintains cleanliness and excellent condition of equipment, and work area., • Executes emergency procedures in accordance with hotel standards., • Complies with safety regulations and procedures., • Complies with hotel policies and rules., • Recycles whenever possible., • Remains current with hotel information and changes., • Complies with hotel uniform and grooming standards., • A minimum of 5 classes not limited too but may include HVAC, Electrical, Indoor Air Quality, Controls. Must be a member of Local 399, • Must be knowledgeable in Grout, • Courses in engineering/maintenance preferred., • Must have English skills (read, write and speak)., • Familiarity with basic tools and equipment, electrical, a/c pumps required., • This position requires bending, lifting and stooping. Must be able to lift up to 75 pounds. Must be flexible to work any shift, including weekends and holidays.

Job Description BUILDING MECHANIC Full Time / NY, NY Work Assignment: East River Plaza We are seeking a Building Mechanic, to be directed by the Chief Engineer / Lead Mechanic and supervised by the Property Manager, to oversee and perform all facility maintenance tasks. General Statement of Duties and Responsibilities: The Building Mechanic oversees and performs all facility maintenance and upkeep. They shall follow a preventative maintenance program, inventory control, and the operation of all HVAC and MEP site equipment. They shall collaborate closely with management and other team members to deliver services and shall supervise technical service providers to ensure compliance with building performance specifications. The Building Mechanic shall report to the Chief Engineer and or Property Manager. Required Qualifications and Experience: We are seeking candidates with 5-7 years of related experience. Candidates must possess or be willing to obtain any building required NYC licenses within one (1) year of date. Timeframe to obtain licenses will be determined by management. They must have completed a trade apprenticeship or technical training, and a high school diploma is required. Responsibilities include, but are not limited to the following: • Perform building repairs and maintenance of all mechanical, electrical, and craft services to ensure operation within design capabilities and achievement of proper environmental conditions as prescribed by the Property Manager., • Oversee the efficient operation of facility equipment and systems., • Communicate with management regarding matters related to services performed., • Assist the Chief Engineer to oversee that tenant improvements are performed safely and efficiently., • Work with the Chief Engineer to administer an effective and accountable preventative maintenance system tailored to the facility., • Regularly evaluate all equipment and systems, providing Management with a list of deficiency items and recommendations for improvement., • Possess licenses and permits required by local laws and ordinances to operate, repair, and maintain the facility's equipment and systems., • Monitor and adjust the Building Management System (BMS)., • Operate fire life safety systems., • Be available on-call for emergencies related to the operations of the building., • Operate, maintain, and repair all HVAC equipment which includes, but is not limited to: compressors, motors, condensers, evaporators, steam traps, pumps, expansion valves, refrigerant lines and devices used to control temperature, and air conditioning systems in their entirety, including the use of approved recovery equipment and processes to comply with all laws and regulations., • Inspect building automation systems for HVAC, lighting, and energy tracking devices., • Inspect electrical motors and engines used to power pumps, compressors, and fans., • Inspect electrical/control systems, all motor controls and related equipment drivers such as variable frequency drives (VFD's)., • Maintain and upkeep equipment / mechanical rooms., • Perform daily rounds of facilities., • Enter and complete Work Orders., • HVAC: Inspect, diagnose, and troubleshoot HVAC systems. Complete routine preventive maintenance and repairs, including changing filters, belts, checking fluid levels, adjusting space temperatures, diagnosing and repairing VAV boxes, heat pumps, changing motors, calibrating and repairing pneumatic systems, etc., • Electrical: diagnose electrical issues, troubleshoot, changing lights, ballasts, performing minor repairs., • Plumbing: bathrooms repairs, soldering, snake drains, replace flushometers., • Perform any additional duties on as required, • Must be able to work independently with little supervision, • Safety awareness, • Ability to lift more than 50 lbs., • Ability to climb a ladder., • Ability to work with hand and power tools, • Good time management, • Ability to use Microsoft Office programs (Excel, Outlook, PowerPoint, and Word), • Ability to clearly communicate in writing and verbally, • Ability to present technical information, • Experience operating Building Management System (BMS), • Advanced understanding of HVAC Systems, • S-12 City Wide Sprinkler System, • S-13 City Wide Standpipe System, • EPA/CFC Universal Certification, • Q-01 NYC Refrigeration Machine Operators License, • F-19 Sprinkler Systems with Gravity and Pressure Tanks, • G-38 Torch Use of Flammable Gases for Cutting and Welding, • G-60 Certificate of Fitness for Torch Use of Flammable Gases, • S-14 Standpipe for Multi-zone System, • F-89 Fire, Life, Safety Director, • S-95 Supervision of Fire Alarm Systems Employee contributions and waiting periods may apply: • 401(k), • Medical, • Dental, • Life and Accidental Death Insurance, • Short and Long Term Disability Insurance, • Flexible Spending Account

Job Description LEAD BUILDING MECHANIC Full Time / NY, NY Work Assignment: Bulova Corporate Center We are seeking a Lead Building Mechanic, to be directed by the Chief Engineer and supervised by the Property Manager, to oversee and perform all facility maintenance tasks. General Statement of Duties and Responsibilities: The Lead Building Mechanic oversees and performs all facility maintenance and upkeep. They shall follow a preventative maintenance program, inventory control, and the operation of all HVAC and MEP site equipment. They shall collaborate closely with management and other team members to deliver services and shall supervise technical service providers to ensure compliance with building performance specifications. The Lead Building Mechanic shall report to the Chief Engineer and or Property Manager. Required Qualifications and Experience: We are seeking candidates with 5-7 years of related experience. Candidates must possess or be willing to obtain any building required NYC licenses within (6) months of hire date. They must have completed a trade apprenticeship or technical training, and a high school diploma is required. Responsibilities include, but are not limited to the following: • Perform building repairs and maintenance of all mechanical, electrical, and craft services to ensure operation within design capabilities and achievement of proper environmental conditions as prescribed by the Property Manager., • Oversee the efficient operation of facility equipment and systems., • Communicate with management regarding matters related to services performed., • Assist the Chief Engineer to oversee that tenant improvements are performed safely and efficiently., • Work with the Chief Engineer to administer an effective and accountable preventative maintenance system tailored to the facility., • Regularly evaluate all equipment and systems, providing Management with a list of deficiency items and recommendations for improvement., • Possess licenses and permits required by local laws and ordinances to operate, repair, and maintain the facility's equipment and systems., • Monitor and adjust the Building Management System (BMS)., • Operate fire life safety systems., • Be available on-call for emergencies related to the operations of the building., • Operate, maintain, and repair all HVAC equipment which includes, but is not limited to: compressors, motors, condensers, evaporators, steam traps, pumps, expansion valves, refrigerant lines and devices used to control temperature, and air conditioning systems in their entirety, including the use of approved recovery equipment and processes to comply with all laws and regulations., • Inspect building automation systems for HVAC, lighting, and energy tracking devices., • Inspect electrical motors and engines used to power pumps, compressors, and fans., • Inspect electrical/control systems, all motor controls and related equipment drivers such as variable frequency drives (VFD's)., • Maintain and upkeep equipment / mechanical rooms., • Perform daily rounds of facilities., • Enter and complete Work Orders., • HVAC: Inspect, diagnose, and troubleshoot HVAC systems. Complete routine preventive maintenance and repairs, including changing filters, belts, checking fluid levels, adjusting space temperatures, diagnosing and repairing VAV boxes, heat pumps, changing motors, calibrating and repairing pneumatic systems, etc., • Electrical: diagnose electrical issues, troubleshoot, changing lights, ballasts, performing minor repairs., • Plumbing: bathrooms repairs, soldering, snake drains, replace flushometers., • Perform any additional duties on as required, • Must be able to work independently with little supervision, • Safety awareness, • Ability to lift more than 50 lbs., • Ability to climb a ladder., • Ability to work with hand and power tools, • Good time management, • Ability to use Microsoft Office programs (Excel, Outlook, PowerPoint, and Word), • Ability to clearly communicate in writing and verbally, • Ability to present technical information, • Experience operating Building Management System (BMS), • Advanced understanding of HVAC Systems, • S-12 City Wide Sprinkler System, • S-13 City Wide Standpipe System, • EPA/CFC Universal Certification, • Q-01 NYC Refrigeration Machine Operators License, • F-19 Sprinkler Systems with Gravity and Pressure Tanks, • G-38 Torch Use of Flammable Gases for Cutting and Welding, • G-60 Certificate of Fitness for Torch Use of Flammable Gases, • S-14 Standpipe for Multi-zone System, • F-89 Fire, Life, Safety Director, • S-95 Supervision of Fire Alarm Systems Employee contributions and waiting periods may apply: • 401(k), • Medical, • Dental, • Life and Accidental Death Insurance, • Short and Long Term Disability Insurance, • Flexible Spending Account

Job Description Line Engineer (Maintenance Technician) Location: Brookville Hotel @ JFK NEW YORK CITY 154-71 Brookville Boulevard | Rosedale, NY 11422 SUMMARY: Keep all equipment in good repair with a minimum of downtime by providing day-to-day maintenance of the hotel under the direction of Engineering Management. Continually work towards and support the improvement of engineering service to both guests and associates. RESPONSIBILITIES: • Report to work on time and in full uniform., • Train and instruct other members of the staff through sharing of knowledge and skills., • Operate as an independent mechanic by analyzing problems, identifying courses of action, and implementing solutions with available resources and to a high degree of quality., • Keep accurate completion and task records in the project files. Set an example of continuous self-development., • Plunging toilets, unclogging drains, repairing all types of hardware, plumbing, and electrical equipment including lamps, air conditioners and cosmetic items., • Clean, lubricate, protect, and otherwise maintain all tools and equipment in the hotel. See that all tools used are returned to the shop and secured in proper storage area., • To protect and otherwise maintain your assigned tool pouch and its tools at the discretion of the Engineering Management., • Monitor systems as necessary, to be fully informed of the system operation and to handle emergencies involving the systems., • Have a working knowledge of fire sprinkler and emergency power systems. Observe and analyze energy and utilities usage in the hotel and on the grounds., • Look for ways to conserve energy and report any ideas to the Engineering Management., • Be available for any emergencies and act in an engineering capacity to protect our guests and associates, and preserve the building and its systems during the emergency., • To act as quickly and responsibly as possible to return the building to its normal operating status. To inform Engineering Management of any such emergencies., • Be aware of all existing departmental Job Safety Analysis and to strive to work in an accident-free manner and to create a safe work environment for others., • Continuously look for conditions which may endanger associates or guests of the hotel and to take immediate action to correct any hazardous conditions found., • Read, log, track, and interpret readings from meters, gauges, and other measuring units., • Maintain a thorough log of each day’s activities and problems that occur and to ensure this information is passed on to other shifts., • Clean all engineering areas as directed by Engineering Management., • Work in a neat and efficient manner, keeping work areas clean and well organized., • Serve as otherwise directed or needed to help maintain the effective and efficient operation of the hotel at the discretion of Engineering Management or the hotel General Manager., • Complete all work assigned in a safe and professional manner. Maintain communications with supervisors to ensure that all needed materials, tools, and supplies are available or on order., • Follow up on any items that may be on back order. Keep supervisor updated on assignments., • Provide training and technical advice to other engineers as needed or requested., • Maintains a working knowledge of all federal, state, and local laws, codes, and regulations., • Maintains a professional image at all times., • Maintains the hotel facility and related equipment in a safe and efficient manner., • Provides for a safe work environment by following all safety and security procedures and rules., • Reads, learns, understands, and refers to the Standard Operating Procedures., • Each associate will be required to follow the rules as found in the M&R Employee Handbook. Performs other duties as assigned by management, of which employee is capable of performing

Job Description Job Title: Roadway Worker In Charge (RWIC) Location: New York, NY Job Type: Full-Time and Part-Time FLSA Status: Hourly; Non-Exempt Reports To: District Manager Travel: Yes, travel is expected for this position (50% - 85% on average). Supervisory Responsibility: No Compensation: Negotiable, based on skills and experience. Company Profile: National Railroad Safety Services, Inc. (NRSS) is a certified DBE/WBE firm primarily focused on providing safety services to the railroad industry. NRSS is the most trusted name in the railroad industry for providing qualified field safety staff and safety training. To best serve the railroad industry, NRSS provides all of these services in the continental United States, Canada, and Mexico. NRSS has the proven ability and the proven safety record to handle any project. Find the safety you have been missing today! Job Description: National Railroad Safety Services, Inc. (NRSS) is seeking a Roadway Worker In Charge (RWIC) to support railroad flagging services for Class 1 Railroads, Regional Short Lines, Transit Systems, State DOT's, as well as Railroad Suppliers, Contractors, and Consultants alike. Required Education: High School Diploma or Equivalent. Required Experience: Minimum 2 years of experience with a Class 1 Railroad, Regional Short Line, Transit System, State DOT Rail Division, Railroad Supplier, Railroad Contractor, and/or Railroad Consultant; preferably within the Maintenance Of Way (MOW) Department. Key Success Factors: • Accountability: Accept full responsibility for self and contribution as a team member., • Adaptability & Flexibility: Ability to consider a variety of issues that exist in the work place and change from one task to another as necessary., • Analytical Thinking: Ability to analyze and synthesize information to understand issues, identify options, and support sound decision making., • Attention to Detail: Ability to work in a conscientious, consistent, thorough manner, and attend to details while pursuing quality when accomplishing tasks., • Communication: Ability to clearly convey information and ideas through a variety of media to employees/clients in a clear and succinct manner., • Customer Service Focus: Ability to provide service excellence to internal and/or external clients., • Decision Making: Ability to identify/understand issues, problems, opportunities and take appropriate action based on available facts, constraints, and probable consequences., • Initiative: Ability to identify what needs to be done and take action before being asked., • Innovativeness: Ability to devise new plans for quality excellence., • Knowledge: Ability to navigate various rulebooks and/or regulations and demonstrate mastery., • Organization: Ability to maintain materials and/or records in a clean and ordered manner., • Planning: Ability to plan and prioritize work load to manage time effectively and accomplish assigned tasks., • Stress Tolerance: Ability to maintain stable performance under pressure or opposition (such as time pressure or job ambiguity)., • Teamwork: Promote cooperation and commitment within a team environment to achieve goals and deliverables., • Proficient computer skills in basic email, phone, and text message applications., • Proficient computer skills in Android OS; on tablet & smart phone., • Proficient computer skills in Citrix Applications., • Strong oral and written communication skills., • Strong technical knowledge in Railroad Engineering, Railroad Design, Railroad Construction, and Safety., • High level of accuracy and attention to detail; well organized., • Demonstrated ability to develop and maintain strong client relationships., • Ability to travel for extended periods of time; sometimes month(s) at a time., • Provide jobsite coordination., • Provide clear and concise communication with Dispatchers, Train Crews, other Railroad Personnel, and/or Contractor personnel., • Provide clear, concise, and thorough job briefings with all personnel on each job site., • Enforce all Railroad, State, and Federal Policies., • Identify rule violations and resolve in accordance with Railroad, State, and Federal Policies., • Enforce Contractor training requirements., • Submit daily field reports detailing Contractor and/or Railroad activities. Physical Demands: The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. • Must be able to hear, speak, read, and write clearly in English., • Must be able to drive long distances and/or travel by other modes as necessary., • Must be able to stand for long periods of time and/or walk on level/uneven ground., • Must be able to see up close, distances, colors and have use of peripheral vision and depth perception., • Must be able to tolerate extreme heat/cold temperatures., • Must be able to tolerate dusty/noisy conditions., • Medical, Dental, Vision, Life Insurance, • Short Term, Long Term Disability Insurance, • Paid Vacation and Holidays Safety Commitment: All employees of all levels are to remain committed to safety at all times while employed at National Railroad Safety Services, Inc. (NRSS). As such, no job is so important and no service is so urgent that we may not take time to perform all work safely. Simply put, safety is our way of life. By placing safety first, we not only ensure the wellbeing of our employees, customers, and communities, but we hold true our commitment to being the leader in safety throughout the Railroad Industry. Closing Statement: National Railroad Safety Services, Inc. (NRSS) is an Equal Opportunity/Affirmative Action Employer. Any candidate selected for this position must be able to successfully pass pre-employment/recurrent background checks, drug/alcohol testing, and classroom training. Job Posted by ApplicantPro

Job DescriptionQuality Control Microbiology Engineer(s) I, II, III Quality Control Microbiology Engineer I The “Quality Control (QC) Microbiology Engineer I” will support two local sites serving as a support role to clinical and/or commercial production. The QC Microbiology Engineer will perform microbiological testing including, but not limited to, growth promotion, microbial identification, sterility testing, Gram stain, and endotoxin. Under the direction of the Associate Manager of QC Microbiology, responsibilities of the QC Microbiology Engineer I will include but are not limited to: Microbiological Testing: • Growth Promotion, • Microbial Identification, • Sterility Testing, • Gram Stain, • EndotoxinEquipment Monitoring:, • Ensure equipment is in proper working conditions, • Ensure all equipment is properly maintained/calibrated, • Shipping of test samples and equipment to contract laboratories for testing, • Complete all documentation according to written Standard Operating Procedures in accordance to Current Good Manufacturing Practices (cGMP) and Good Documentation Practices (GDP).REQUIREMENTS, • Associates degree in a science or relevant field required, • Training in GxP/ GDP, Safety, • Minimum 0-2 years of experience or equivalent experience., • Microbiology testing or within the biopharmaceutical industry experience preferred., • Proficient with computer software; Microsoft Office, • Strong written and oral communication skills, • Must be detail oriented, can multi-task, work in a team environment, and have the flexibility to adapt to company growth as well as its evolving responsibilities, • Must utilize proper personal protective equipment (PPE) when handling all human specimens, gases, corrosive chemicals, liquid nitrogen and noise levels, • Must be able to work during the weekend, holidays and as required by the company, • Duties, responsibilities, and activities may change at any time with or without notice.QC Microbiology Engineer II The Quality Control Microbiology Engineer II will support two local sites serving as a support role to clinical and commercial production. The QC Microbiology Engineer II will perform microbiological testing including, but not limited to, growth promotion, microbial identification, sterility testing, Gram stain, and endotoxin. Under the direction of the Associate Manager of Microbiology, responsibilities of the QC Microbiology Engineer II will include but are not limited to: Microbiological Testing:, • Growth Promotion, • Microbial Identification, • Sterility Testing, • Gram Stain, • EndotoxinEquipment Monitoring:, • Ensure equipment is in proper working conditions, • Ensure all equipment is properly maintained/calibrated, • Shipping of test samples and equipment to contract laboratories for testing, • Produce documentation according to written Standard Operating Procedures in accordance to Current Good Manufacturing Practices (cGMP) and Good Documentation Practices (GDP)., • Writing/conducting investigations pertaining to microbiological testing, • Develop and train QC Microbiology Engineer I personnel on relevant business processesREQUIREMENTS, • BA/BS in a science or relevant field required or equivalent experience, • Minimum 2-4 years of experience with microbiological testing or within the biopharmaceutical industry., • Training in GxP/GDP, Safety, • Proficient with computer software such as; Microsoft Office, • MODA/LIMS, • Familiarity with ISO and EU standards, • Strong written and oral communication skills, • Technical writing skills, • Technical training ability, • Must be detail oriented, can multi-task, work in a team environment, and have the flexibility to adapt to company growth as well as its evolving responsibilities, • Supervisory Responsibility, • Must utilize proper personal protective equipment (PPE) when handling all human specimens, gases, corrosive chemicals, liquid nitrogen and noise levels., • Employee may occasionally be exposed to infectious diseases transmittable through human blood, tissues, or bodily fluids and are expected to utilize universal precautions with all human specimens., • Must have the ability to work in a team-oriented environment and with clients, • Must be able to work during the weekend, holidays, and as required by the company, • Occasionally personal protective equipment may be required including lab coat, latex gloves, safety glasses and/or respirator., • Duties, responsibilities, and activities may change at any time with or without notice.QC Microbiology Engineer III The Quality Control Microbiology Engineer III will support two local sites. Serving as a support role to clinical and/or commercial production. The QC Microbiology Engineer III will coordinate data for batch release, participate in project/client meetings, and author/revise microbiological testing procedures. Additionally, the incumbent will perform microbiological testing including, but not limited to, growth promotion, microbial identification, sterility testing, Gram stain, and endotoxin. Under the direction of the Associate Manager of Microbiology, responsibilities of the QC Microbiology Engineer III will include but are not limited to:, • Documentation according to written Standard Operating Procedures in accordance to Current Good Manufacturing Practices (cGMP) and Good Documentation Practices (GDP)., • Coordinates microbiological testing data for batch release, • Participation in project/client meetings and communications, providing scientific and technical expertise, • Authoring/revising Standard Operating Procedures, Work Instructions, Forms, and Protocols, • Review of investigations and documentation of non-confirming events and environmental excursions., • Apply expertise of compliance requirements to maintain an inspection-ready state., • Participate and act as subject matter expert during audits/inspections, • Develop and train QC Microbiology Engineer II on relevant business processes, • Processing of purchase orders for outsourced testing and lab supplies, • Coordinates work orders, • Other duties as assignedREQUIREMENTS, • BA/BS in a science or relevant field required or equivalent experience, • Minimum 5-7 years of experience with environmental monitoring or within the biopharmaceutical industry, • Minimum required training; GxP/GDP Training, Safety Training, • Proficient with computer software such as; Microsoft Office, MODA/LIMS; Microsoft Visio (preferred); Netsuite (preferred); Maximo Asset Management System (preferred), • Proficient knowledge of ISO and EU standards, • Strong knowledge of quality systems and ability to interpret Quality standards for implementation and review., • Strong written and oral communication skills, • Strong technical writing skills, • Technical training experience, • Must be detail oriented, can multi-task, work in a team environment, and have the flexibility to adapt to company growth as well as its evolving responsibilities, • Supervisory Responsibility; Direct reports, • While performing the duties of this job, the employee may occasionally be exposed to infectious diseases transmittable through human blood, tissues, or bodily fluids and are expected to utilize universal precautions with all human specimens., • Must utilize proper personal protective equipment (PPE) when handling all human specimens, gases, corrosive chemicals, liquid nitrogen and noise levels., • Must have the ability to work in a team-oriented environment and with clients., • Must be able to work during the weekend, holidays and as required by the company

Job DescriptionQuality Control Microbiology Engineer III Lynkx Staffing LLC specializes in placing talented professionals in the Biotechnology, Pharmaceutical and Medical Device, IT and Human Resources disciplines in New Jersey. The Quality Control Microbiology Engineer III will support two local sites. Serving as a support role to clinical and/or commercial production. The QC Microbiology Engineer III will coordinate data for batch release, participate in project/client meetings, and author/revise microbiological testing procedures. Additionally, the incumbent will perform microbiological testing including, but not limited to, growth promotion, microbial identification, sterility testing, Gram stain, and endotoxin. Under the direction of the Associate Manager of Microbiology, responsibilities of the • Documentation according to written Standard Operating Procedures in accordance to Current Good Manufacturing Practices (cGMP) and Good Documentation Practices (GDP)., • Coordinates microbiological testing data for batch release, • Participation in project/client meetings and communications, providing scientific and technical expertise, • Authoring/revising Standard Operating Procedures, Work Instructions, Forms, and Protocols, • Review of investigations and documentation of non-confirming events and environmental excursions., • Apply expertise of compliance requirements to maintain an inspection-ready state., • Participate and act as subject matter expert during audits/inspections, • Develop and train QC Microbiology Engineer II on relevant business processes, • Processing of purchase orders for outsourced testing and lab supplies, • Coordinates work orders, • Other duties as assignedREQUIREMENTS, • BA/BS in a science or relevant field required or equivalent experience, • Minimum 5-7 years of experience with environmental monitoring or within the biopharmaceutical industry, • Minimum required training; GxP/GDP Training, Safety Training, • Proficient with computer software such as; Microsoft Office, MODA/LIMS; Microsoft Visio (preferred); Netsuite (preferred); Maximo Asset Management System (preferred), • Proficient knowledge of ISO and EU standards, • Strong knowledge of quality systems and ability to interpret Quality standards for implementation and review., • Strong written and oral communication skills, • Strong technical writing skills, • Technical training experienceMust be detail oriented, can multi-task, work in a team environment, and have the flexibility to adapt to company growth as well as its evolving responsibilitiesSupervisory Responsibility; Direct reportsWhile performing the duties of this job, the employee may occasionally be exposed to infectious diseases transmittable through human blood, tissues, or bodily fluids and are expected to utilize universal precautions with all human specimens.Must utilize proper personal protective equipment (PPE) when handling all human specimens, gases, corrosive chemicals, liquid nitrogen and noise levels.Must have the ability to work in a team-oriented environment and with clients.Must be able to work during the weekend, holidays and as required by the company.Working EnvironmentWhile performing the duties of this job, the employee may occasionally be exposed to infectious diseases transmittable through human blood, tissues, or bodily fluids and are expected to utilize universal precautions with all human specimens.Must utilize proper personal protective equipment (PPE) when handling all human specimens, gases, corrosive chemicals, and liquid nitrogen.Other exposures may include gases (nitrogen), or corrosive chemicals (Clorox, potassium hydroxide), or exposure to liquid nitrogen. The noise level in the work environment is moderately noisy.Must have the ability to work in a team-oriented environment and with clientsMust be able to work during the weekend, holidays and as required by the companyMust be able to handle the standard/moderate noise of the manufacturing facility Please note this job description is not designed to cover or contain a comprehensive listing of activities, duties, or responsibilities that are required of the employee for this job. Duties, responsibilities, and activities may change at any time with or without notice.

Job DescriptionCOMPANY SUMMARY Empire State Realty Trust, Inc. (NYSE: ESRT) is a NYC-focused REIT that owns and operates a portfolio of well-leased, top of tier, modernized, amenitized, and well-located office, retail, and multifamily assets. ESRT’s flagship Empire State Building, the “World's Most Famous Building,” features its iconic Observatory, ranked the #1 Top Attraction in New York City for the fourth consecutive year in Tripadvisor’s 2025 Travelers’ Choice Awards: Best of the Best Things to Do. The Company is a recognized leader in energy efficiency and indoor environmental quality. As of June 30, 2025, ESRT’s portfolio is comprised of approximately 7.8 million rentable square feet of office space, 0.8 million rentable square feet of retail space and 743 residential units. More information about Empire State Realty Trust can be found at esrtreit.com and by following ESRT on Facebook, Instagram, TikTok, X, and LinkedIn. The dedicated team at ESRT is a collection of diverse individuals with a shared passion for excellence and a keen eye toward future growth. Headquartered in New York City, we harness the energy of the city in everything we do. We care for one another, work hard, and have a lot of fun doing it! We are Certified™ as a Great Place to Work® by the global authority, Great Place to Work®, on workplace culture, employee experience, and leadership behaviors. We prioritize and invest in the health and wellness of employees to attract, develop, and retain top-tier talent. ESRT values continuous employee development and encourages colleagues to excel in their roles and adapt to emerging business needs. From our crown jewel, The Empire State Building, to incredible buildings modernized for the 21st century, to outstanding customer service, and our decade-long leadership position in sustainability and energy efficient portfolio that is 100% fully powered by renewable wind electricity, we take pride in our work. ESRT seeks an equally passionate colleague to join the team, understand the vision and help achieve that vision. POSITION SUMMARY The Assistant Property Manager will play a crucial role in overseeing the comprehensive management of all building operations for approximately 1 million square feet of Class A office space. This role involves overseeing building staff, coordinating tenant services, and ensuring compliance with building policies and procedures. The Assistant Property Manager will also support the Property Manager in developing budgets, managing special projects, and maintaining property files and records. This position requires strong supervisory and administrative skills, a basic understanding of electrical and mechanical systems, and the ability to handle multiple tasks effectively.RESPONSIBILITIES • Establish and maintain procedures to properly administer all purchase orders processing, payroll administration, accounts payable, accounts receivable, and related correspondence, • Utilize working knowledge of all building accounting systems, accruals, and reclassification, • Assist Property Manager in developing annual budgets, quarterly reforecasts and monthly variances, including Operating, Tenant Improvement, and CapEx projects, • Provide knowledgeable of ownership’s policies and procedures and Union (32B-J, Local 94) Commercial Building Agreements, • Administer all special projects that are assigned by the Property Manager and Portfolio Manager, • Assist Property Manager in ongoing leasing program including review of leases for compliance, notification, updates, escalations, late charges, statements, and insurance compliance, • Assist in the coordination of tenant move-ins and outs and completion of associated paperwork, • Coordinate with Property Manager in the issuance of notices relating to tenants, security, janitorial, or project issues, • Oversee engineering and building staff, meet with the Chief Engineer and/or Superintendent on a daily basis to coordinate ongoing work and the building’s repair and maintenance program, • Direct the day-to-day operations of the security and cleaning contractors, • Schedule overtime and vacations to provide adequate coverage of building functions, • Ensure adequate and qualified replacements when absences or vacancies occur in the security and cleaning staffs, • Manage the operation of tenant service requests, ensuring timeliness of service calls and the proper dispatch of requests to building trades, • Assign and monitor maintenance and custodial tasks as called for by tenant or management request, • Coordinate special work orders, trash removal and freight car usage, • Assign work priorities, • Ensure employee duties/responsibilities and building policies/procedures is understood by the staff, • Update reports for weekly and monthly meetings with ownership, • Implement and maintain property files, manuals, and records, • Assist in monitoring all on-going maintenance/construction projects performed by external contractors, • Coordinate all "Slip & Fall" and related bodily injury insurance issues utilizing full knowledge of all building insurance coverage and report all accidents with complete details to insurance carrier, • Maintain current required insurance certificates for contractors and vendors, • Assist Property Manager in contract bid process including preparation of RFP documents and bid evaluation, • Review and evaluate fire safety system permits to ensure compliance with applicable fire codes, • Oversee all required training including, but not limited to OSHA, Hazard Communication, Mold, Asbestos, Fire Safety, etc. on an as-needed basis and distributes relevant memorandums, • Analyze and oversee the maintenance of all building inspections and records, • Coordinate and advise of emergency trade responses with management and trades, • Perform daily inspections to ensure building standards are being adhered to and enforce in-house cleaning programs, cleaning contracts, and performance of routine maintenance tasks, • Inspect areas under construction daily, • Coordinate building service (i.e., freight, security, cleaning, engineering, fire watch) for after-hour construction, maintenance, tenant moves, and any other special projects, • Work with HR department on any disciplinary action, • Meet with tenants on a regular basis to ensure tenant satisfaction, • Prepare monthly overtime reports and reallocate labor costs to projects as needed, • Assist the Property Manager on ad hoc analysis and reporting, • Evaluate lease proposal from an operation and LL work perspectiveWHAT SUCCESS LOOKS LIKE, • Be self-driven, • Make strong communications a core competency, • Have a positive attitude and be a forward thinker, • Have a long-term strategy and set goals, • Find opportunities where others see obstacles, • Be decisive, curious, and engage your tenants, colleagues, and staff, • Present a well maintained, operational, safe propertyREQUIRED SKILLS / ABILITIES, • Ability to handle multiple tasks, coordinate, manage, and communicate effectively, • Proven experience leading and supporting performance management processes for direct reports, including goal setting, regular feedback, development planning, and performance evaluations to drive individual and team success, • Strong administrative skills, • Basic understanding of electrical/mechanical systems, and construction, • Maintain a professional presence, • Knowledge of Yardi and Building Engines preferred, • Basic Project Management experience a plusEDUCATION & EXPERIENCE, • Bachelor's degree or equivalent experience, • Minimum of five (5) years property, maintenance and construction experience, • Minimum of three (3) years supervisory and management experiencePHYSICAL REQUIREMENTS, • Prolonged periods of sitting at a desk and working on a computer, • Must be able to lift up to 15 pounds at times, • Periods of prolonged walking inclusive of ascending up and down stairs for building inspectionsWHAT YOU CAN EXPECT, • At ESRT, like our tenants, our employees come from everywhere. We foster a collaborative work environment that captures top talent and cultivates the best ideas. As a Great Place to Work® Certified employer, we are committed to maintaining our positive work culture where employees are engaged and can grow and develop. In addition, ESRT employees embody our Company Culture & Success Factors -, • Adaptable – you are a self-starter who’s able to quickly digest and execute new processes to work both collaboratively and independently, • Dynamic – you are solutions-oriented, aim to improve processes and implement efficiency, and offer insightful feedback to improve ESRT, • Dependable – you take a strong sense of ownership and accountability over your work, • Passionate – you keep up with industry trends and are excited about the potential to propel the industry forward with a “roll-up-your-sleeves” attitude, • Curious – you consistently look for new ways to work smarter, not just harder, • Ethical – you treat others with respect, act with integrity in how you perform your work, and embrace our collaborative culture, • Positive – you possess a service-oriented attitude with excellent follow through BENEFITS, • Competitive base salary and bonus, • Health/Dental/Vision insurance, • Company sponsored Life, AD&D, STD (with Salary Continuation), and LTD Insurance, • Voluntary Enhanced LTD Program, • Voluntary Hospital, Accident, and Cancer Programs, • 401(k) with 100% match up to 5%, • Paid parental leave, • Pre-tax transit accounts, • Employee Assistance Program for emotional, financial, and legal supportWELL-BEING, • Generous paid time off, • Flex remote work time, • Flex Summer Fridays, • Employee engagement programs, • Volunteer time off, • Continuing education, • Complimentary Empire State Building Observatory access, • Complimentary gym membership and other wellness benefits

Job Description About Seastreak: Seastreak provides fast passenger ferry services in the New York metropolitan area. We proudly offer high-speed catamaran services to points in Manhattan, central New Jersey, Nantucket, Martha’s Vineyard, and more with a fleet of robust vessels. In addition to commuter services to and from Manhattan and New Jersey, we offer an array of special events, sightseeing cruises and tours, daytrips, and getaways year round. Job Summary: Deckhands / Crew members operate and maintain equipment on the deck of a vessel to assist with docking and other operations. Responsibilities include greeting passengers, collecting tickets, throwing lines, participating in safety training, and ensuring the safety of our passengers. Your role as deckhand would also include working within Seastreak’s Ferry Safety Management System. Deckhands are expected to provide exemplary customer service and follow the directions of the Captain and Mate. Requirements: • High School diploma required, • Must be able to lift 50lbs, • Must pass a pre-employment DOT drug test and enroll in Seastreak's random drug testing program required by the United States Coast Guard Career Advancement: Multiple paths to advance within Seastreak to positions with more responsibility and higher compensation. Seastreak provides training for these positions can be completed while working as a deckhand by completing the necessary sign-off packet. These jobs include: • Vessel Mechanic / Engineer, • Senior Deckhand, • Mate Job Types: Full-time, Part-time Pay: From $16.00 per hour Benefits: • 401(k), • 401(k) matching, • Dental insurance, • Employee discount, • Flexible schedule, • Health insurance, • Life insurance, • Paid time off, • Parental leave, • Professional development assistance, • 10 hour shift, • 12 hour shift, • 8 hour shift, • Atlantic Highlands, NJ 07716: Reliably commute or planning to relocate before starting work (Required), • Driver's License (Preferred)

Job DescriptionIf you thrive in a team-oriented workplace that challenges your skills, to drive your career development, embraces diversity and rewards innovation, with competitive pay and great employee programs, join the Ainsworth (a GDI company) team today!Job Summary:Provide leadership of all projects under his/her supervision. The role is primarily focused on exceeding client expectations through proactive planning and preparation, including project schedule, effective sub & vendor management, addressing field issues, timely project close-out and managing finances. Engagement will start from pre-construction; sub & vendor leveling, to final client, sub & vendor close-outs, and service contract/future opportunities with the client and building. Key Responsibilities: • Review projects prior to kick-off meeting. Visit jobsite as necessary., • Advise purchasers of any specific conditions or potential cost savings, preferred subcontractor list, • Based on GC base schedule, formulate a job specific schedule for mechanical trades, • Attend, monitor and provide solutions at coordination meeting as required, • Manage subcontractors in field to ensure project schedule is being met, • Provide general mediation and troubleshooting for client and subs throughout the project, • Meet with the PE weekly to discuss project status, issues and look ahead, • Own, or delegate completion of all daily labor, safety or other required field reports, • Monitor project progress through jobsite visits & daily communication, subcontractors, vendors, etc., • Attend client interviews, as deemed necessary by the executive team and the estimating department., • Monitor and ensure project engineer submits and releases all shop drawings and equipment in a timely fashion., • Establish relationship between client and service department for future service agreement., • At 90% completion, confirm punch list is received and completed all startup and balancing., • Mentor the Junior PM through involvement with project issues, meetings, and one on one dialogue, • Coordinate Ainsworth subcontractor’s installation with client and other trades, • Monitor all change orders for understanding of the work that is involved, the status of the associated work and materials and the customer’s acceptance of the additional work., • Manage the finances and cash flow of each project ensuring all projects risks are kept to a minimum, collecting money on a timely basis, collecting change orders and minimizing back charges, • Responsible for monthly payment requisitions, pencil and final, follow up on payments, • Work with the accounting department to submit accurate invoices and monitor subsequent progress billing. Qualifications: • Up to 10 years of experience in fast-track fit-out work (new construction experience a plus), • Personable and professional demeanor, client-centric focus, • Self-motivated, take initiative, high energy, positive attitude, decision maker, • Ability to think analytically and quickly., • Office & field experience directly overseeing all aspects of mechanical projects, • Experience in strategic planning & evaluating field risks, • Knowledge of project financials (Budgets, buyouts, leveling, AIA, SOV, PO’s, CO’s), • Technical comprehension of HVAC air and water systems, knowledge of system functions, • Team player, ability to balance between delegating and self-preforming tasks, • Subcontractor & vendor supervision, quality control, • Excellent written and oral communication skills, • Ability to effectively plan, prioritize, proactive problem solver, • Coordinate and resolve field issues w/other trades Why work at Ainsworth? Ainsworth is growing at an unprecedented rate and to help attract and retain top talent. We offer a wide variety of benefits (for full-time, permanent positions positions) including the following: Benefits: Comprehensive health, dental and medical benefits, including wellness supports and generous vacation Growth: In-house training and development, access to LinkedIn Learning and other professional development opportunities, Employee performance-based bonus program, where applicable Rewards: Service milestones and peer recognition plus Employee Discounts and Incentives Flexibility: Hybrid working models, where applicable Diversity: An inclusive organization that embraces diversity and belonging; work in a great team atmosphere with future potential for promotion within company While we appreciate all applications we receive, we advise that only candidates under consideration will be contacted. Ainsworth, a subsidiary of GDI, is committed to building a diverse and inclusive workplace. Qualified designated group members are encouraged to apply as any reasonable accommodation of qualifications will be considered as per our Accommodation Policy, available upon request. Ainsworth, a subsidiary of GDI, is an integrated multi-trade company, offering an end-to-end services and solutions for all asset maintenance and refurbishment requirements of our customers. We are continually striving to create better and more advanced products as well as provide the highest quality service. We are rapidly growing and need talented professionals to help drive our vision at becoming the best multi-trade company in the country! Join us…. Make a difference. #LI-Onsite

Title: Contract Processor Location: Long Island City Queens NY Duration: Indefinite / Full Time Explain the function(s) to be performed by the requested staff member: • Prepares processes and monitors contract solicitation packages and related addendums. Ensure that all relevant documents are review in a timely, thorough, and professional manner, following established client policies, practices, and procedures. (a) Appropriate prioritization of documents occurs. (b) Good quality work products generated., • Reviews bid documents submitted by the Architecture & Engineering, and Project Management Divisions., • Assists Contractors and Consultants in all aspects of the bid & award and prequalification process and ensured bidders’ compliance with the client bidding requirements., • Updates computer files on each project and acts as a liaison between Contractors and the SCA’s staff. Process requests for additional funding prior to award., • Prepare process and manage the sealed bid solicitation Request for Contract (RFC) process for various client projects related to mentor, capital improvements, requirements, and new constructions., • Analyze scope of work and cost estimates., • Communicate with Architect & Engineer, Construction Management, Prequalification Unit, Business Development Division and Various Other Departments as needed for revisions and updates, and subsequent readiness for the bidding process., • In coordination with Construction Management and A & E, review and respond to contractors’ questions and comments received during the bidding process., • Function as the Bid Opening Official for the client., • Maintain computer information system to provide data for planning and control of all projects and maintain spreadsheets tracking the status of said projects.

Position: Construction QA/QC and Electrical Commissioning Engineer Location: U.S. (Travel up to 50%). Current need in Palisades, NY About the Role A Global Real Estate and Engineering firm is seeking a skilled Construction QA/QC and Electrical Commissioning Engineer to support mission-critical and data center projects. The role involves overseeing electrical quality assurance, system commissioning, and field testing across all project phases. The ideal candidate will possess strong technical acumen, excellent organizational skills, and the ability to work collaboratively with cross-functional teams in fast-paced environments. Key Responsibilities • Lead and execute QA/QC and electrical commissioning programs in alignment with ASHRAE guidelines., • Conduct system inspections, testing, and verification for electrical systems, including UPS, switchgear, generators, and EPMS., • Develop and implement commissioning plans, checklists, and test scripts (functional and integrated systems tests)., • Perform design reviews, submittal reviews, and field inspections for conformance with specifications., • Coordinate with contractors, engineers, and AHJs throughout project delivery., • Develop and maintain commissioning documentation, SOPs, MOPs, and Systems Manuals., • Utilize QA/QC and commissioning software such as BIM360, CxAlloy, and Facility Grid., • Perform electrical testing and analyze results using tools such as PQMs, thermography, and ground testing equipment., • Support the planning, scheduling, and reporting of commissioning progress and performance., • Provide vendor training evaluation and system performance verification. Qualifications • Bachelor’s degree in Electrical Engineering or related technical field (ABET-accredited preferred)., • Minimum 10 years of relevant electrical engineering or field-testing experience, including 5 years in commissioning or QA/QC., • Commissioning Professional certification preferred., • PE or PMP designation is an asset., • Proven expertise in testing and commissioning electrical power systems (UPS, ATS, STS, generators, PDUs, etc.)., • Strong analytical, communication, and leadership skills., • Proficiency in MS Project, Word, and Excel., • Demonstrated ability to consolidate and report project performance data., • Experience in consultancy or owner’s representative organizations is advantageous. Work Environment • Field-based role with travel up to 50% across the U.S., • Collaborative, high-performance team environment focused on mission-critical projects.

Position Title: Electrical Foreman Classification: Non-Exempt Department: Operations & Facilities Dept (Local 3 – House Electric) Supervisor: Director of Facilities Hourly Rate: $‎66.50 (Based on Local 3 - Electricians CBA) The Javits Center is considered the busiest convention center in the United States, hosting the world's leading conventions, trade shows, and special events on Manhattan's West Side. These large-scale events have generated billions of dollars in annual economic activity for New York City and New York State, supporting thousands of jobs in and around the facility. Located on 11th Avenue between West 34th Street and West 40th Street, the iconic structure has played a prominent role in New York’s recovery and resurgence, and with a state-of-the-art expansion project recently completed, the venue features more than 850,000 square feet of total exhibition space, two new floors of meeting room space, a rooftop pavilion and terrace, as well as a range of catering, sustainability, and technology services. Position Summary: The Electrical Foreman is responsible for assisting with the inspection, installation, scheduling, calibrating, testing, repairs & maintenance of all electrical systems and equipment for the interior and exterior of the Javits Center buildings. The position requires assisting with managing, scheduling and supervising staff, contractors, and electrical projects to include procurement of equipment, supplies and materials. Provides technical assistance to the center’s functional shops, trades and departments. Coordinates energy management efforts and responds to energy demand needs. Interested candidates must be willing to work full-time onsite at the Javits Center. Essential Functions: • Installations, diagnoses, repairs and services of high, medium and low voltage electrical power distribution systems, including IT infrastructures ( CAT 6 cabling, Fiber and CCTV ) and automated controls for large commercial building systems., • Electrical installation, electrical feeders testing and repairs for HVAC (Heating, Ventilation and Air Conditioning) elevators, escalators, emergency power generators, electrical and mechanical equipment, BacNet Fiber and CAT 6 IT Cabling, variable frequency drives, and building automation integration., • Diagnose, test, and calibrate systems for better energy consumption; loop tuning and system responsiveness., • Understanding of BacNet integration, PPCL (programmable power control logic)., • Generate, document, and share detailed technical electrical / electronic data and energy reports as well as full design interpretation and understanding of electrical and electronic drawings, schematics, literature, sketches, shop drawings, designer and manufacturer specifications for high tension, medium and low voltage power distribution., • Proficient in testing, installing, setting up, maintaining data and communications cabling for switches, servers and computers onsite., • Experienced in Microsoft Office, lighting distribution, IT cabling and technology controls, and building management systems., • Installation, testing, repairs, and maintenance of life safety systems (fire alarm, smoke controls, electrical components of fire sprinklers system and fire suppression systems)., • Ability to provide on-site staff training on automated controls system operations., • Skillful in the repairs, maintenance, and use of Siemens DESIGO, Building X, Digital Twin software, fire alarm, and ARC (Auxiliary Radio Communications) systems, electrical meters, and electrical testing tools and equipment., • Knowledge of modulators, encoders, decoders, optical receivers, optical transmitters, multiplexers, amplifiers, multi- meter, and Trilithic (broadband communications)., • Knowledge of testing and measuring equipment, radio frequency microwave components, fire alarm and emergency smoke control systems, digital and analog meters, electrical digital analyzers, optical time-domain reflect-o-meters (OTDR), and electrical infrared testing., • Full responsibilities for service, repairs, and maintenance to primary and secondary power distribution systems to include main primary switchgears, secondary paralleling switch gears, substations, Step-up, down and isolating transformers, Automatic Transfer Switches, motor control centers & VFD’s, normal & emergency power panels and lighting electrical panels, including associated controls and software., • Ability to implement and generate planned scheduling, reports, estimates, material take offs, and energy trend reports for energy consumption, emergency load reduction (load shedding and balancing), and comfort control systems., • Follow and support Local 3 CBA agreement, managerial goals, objectives, and the Javits Center’s policies and procedures. Qualifications: • Must be able to perform essential functions of the position with or without reasonable accommodation., • Preferred New York licensed electrician or electrical engineer, • 10 years of experience and full understanding of National, State and City electrical codes to include but not limited to NEC, NFPA, DOB, NYS, DASNY, FDNY, and NYC building electrical codes., • Full OSHA, LOTO (Lock Out- Tag Out) and ARC Flash Safety understanding., • Local 3 – Classification “A” – Journeyman / Wireman., • Inventory control, par stock, FIFO, and Just in Time ordering., • Ability to manage technical building control systems, including PLC (Programable Logic Controllers), ASCO PMS (Power Management Systems), and Electrical Sequence of Operations controls including Manufacturer and Design algorithms., • Must have electrical, instrumentation, electronics, design, repair & maintenance or similar industry experience., • Must have electrical controls and mechanical experience., • Must have computer skills (Microsoft Office, NetSuite), graphics navigation software, Life Safety Systems & Fire controls, Solar PV, PMS, CMMS, and BMS/BAS., • Ability to work under time constraints and be able to multi-task., • Ability to analyze problems quickly and accurately and to implement effective courses of corrective action. Special Conditions of Position: • Must have a valid driver’s license and technical certifications., • Required flexibility to allow for evening, weekend, and holiday coverage when needed., • Must be able to work in high elevations utilizing scissor lifts, boom lifts, and scaffolds., • Must be able to lift 50 Lbs. regularly and 35 lbs. constantly., • Must be able to stand and walk for extended periods of time., • Will be subjected to routine indoor and outdoor work and exposure to climate changes and extreme weather conditions. The policy of this company prohibits any employment practice which in any way discriminates or tends to discriminate against any person, employee, or employment with respect to conditions or privileges of employment because of an individual’s race, color, religion, national origin, ancestry, marital status, non-job-related disability, past service in the Armed Forces of the United States, sex, or age as provided by law. NY CONVENTION CENTER OPERATING CORPORATION IS AN EQUAL OPPORTUNITY EMPLOYER. In adherence to our commitment to fostering an inclusive and accessible workplace, the Javits Center extends its dedication to providing reasonable accommodations. Candidates requiring adjustments during the application process or employees seeking workplace accommodations are encouraged to liaise with our Human Resources department. Our organization is unwavering in its resolve to ensure equitable opportunities, and a workplace environment characterized by support and fairness for all.

Job Description Ensign Engineering, P.C. (EEPC) located in the Bronx, NY is a WBE/VOSB engineering & architectural design and construction management firm. Established in 1993, EEPC’s experience includes MEP engineering projects in schools, hospitals, Police Stations, restaurants, and airports. We are experts in delivering creative solutions in designs, system procurement, commissioning, project management and owner’s representation. Our portfolio is large and our reputation is unmatched working in NYC with various architects and agencies. Ensign is a great place to work featuring challenging technical assignments, competitive salaries and the opportunity for career growth. We are expanding our Electrical Engineering Practice and seeking an experienced (5-7 years) engineer familiar with current NYC Electrical and Fire Code, NYC Building and Energy Conservation Codes, and NFPA standards. Qualifications include Electrical Engineering degree, CAD capable and experience designing power and lighting, fire alarm and low voltage systems. The successful candidate will have excellent communication and technical writing skills, be self-motivated, experienced coordinating with HVAC, Plumbing, and Fire Protection engineers and designers. A NYS PE license is preferred. Company DescriptionENSIGN ENGINEERING, P.C., is a leading Bronx based multi-discipline engineering firm, whose principals and associates provide consulting and design expertise in engineering and construction management. We are hands-on engineers, with principals intimately involved in each phase of a project from initial planning to final commissioning. ENSIGN ENGINEERING, P.C established in 1993, is certified with the Federal Government as a Veteran Owned Small Business (VOSB) as well as a WBE/DBE by most New York State and City agencies including, New York City DDC, NYS DOT, NYC School Construction Authority and the Port Authority of New York & New Jersey. ENSIGN ENGINEERING, P.C.'s mission is to provide first-rate civil, structural, mechanical, plumbing and electrical consulting engineering services on public, private, institutional, industrial and commercial projects. The company's principal officers are: Regina Gallagher Marengo, P.E.\t\t\tPresident Civil Engineer Depending upon the scope of a project, ENSIGN ENGINEERING, P.C. is readily able to retain and manage a team of highly experienced designers, engineers and inspectors. Our location in the New York metropolitan area gives us ready access to an extensive pool of experienced professionals. The goal of ENSIGN ENGINEERING, P.C. is to deliver projects on time, within budget, properly designed, and in complete compliance with the Client's scope of project. Areas of engineering expertise include the following: • MEP Design and Construction Management, • Existing MEP Condition Surveys and Analysis, • Energy Audits per LL84 & LL87, • Electric service, distribution, power and lighting, • Fire detection, alarm, telecom, security, • Fire suppression, sprinkler and standpipe, • Civil and Site Engineering, • Water Supply and Distribution, • Storm Water Management, • Traffic Studies and Analysis, • CommissioningENSIGN ENGINEERING, P.C., is a leading Bronx based multi-discipline engineering firm, whose principals and associates provide consulting and design expertise in engineering and construction management. We are hands-on engineers, with principals intimately involved in each phase of a project from initial planning to final commissioning.\r\n\r\nENSIGN ENGINEERING, P.C established in 1993, is certified with the Federal Government as a Veteran Owned Small Business (VOSB) as well as a WBE/DBE by most New York State and City agencies including, New York City DDC, NYS DOT, NYC School Construction Authority and the Port Authority of New York & New Jersey. \r\n\r\nENSIGN ENGINEERING, P.C.'s mission is to provide first-rate civil, structural, mechanical, plumbing and electrical consulting engineering services on public, private, institutional, industrial and commercial projects. The company's principal officers are:\r\n\r\nRegina Gallagher Marengo, P.E.\t\t\tPresident\r\nCivil Engineer\r\n\r\n\tDepending upon the scope of a project, ENSIGN ENGINEERING, P.C. is readily able to retain and manage a team of highly experienced designers, engineers and inspectors. Our location in the New York metropolitan area gives us ready access to an extensive pool of experienced professionals. \r\n\r\n\tThe goal of ENSIGN ENGINEERING, P.C. is to deliver projects on time, within budget, properly designed, and in complete compliance with the Client's scope of project. Areas of engineering expertise include the following:\r\n\r\n- MEP Design and Construction Management \r\n- Existing MEP Condition Surveys and Analysis\r\n- Energy Audits per LL84 & LL87 \r\n- Electric service, distribution, power and lighting\r\n- Fire detection, alarm, telecom, security\r\n- Fire suppression, sprinkler and standpipe\r\n- Civil and Site Engineering\r\n- Water Supply and Distribution\r\n- Storm Water Management\r\n- Traffic Studies and Analysis\r\n- Commissioning

Job Description Summary We are seeking a Mechanical Design Engineer to join our New York office and contribute to cutting-edge, sustainable design projects. As a leading MEP design firm in the architectural engineering consulting space, we’re looking for a collaborative and communicative professional who thrives in a team-oriented environment and is eager to develop innovative, high-performance building solutions. This role is ideal for engineers passionate about architecture, sustainability, and iconic building design. Key Responsibilities * Complete assigned tasks accurately and efficiently with minimal supervision * Prepare detailed project documentation and deliverables * Interpret and analyze plans, specifications, and design criteria * Collaborate closely with internal teams, clients, and consultants * Apply building codes, industry standards, and best practices in design * Estimate probable construction costs for mechanical systems * Conduct site visits and generate field reports * Design and document HVAC and plumbing systems using AutoCAD and Revit * Perform mechanical engineering calculations and assist with equipment selection * Edit and write project specifications as part of the documentation process * Use simulation tools to analyze building performance and optimize system designs * Support implementation of the project quality management plan (QMP) Key Skills & Competencies * Strong understanding of mechanical systems and MEP design fundamentals * Excellent problem-solving, communication, and organizational skills * Detail-oriented with a focus on accuracy and quality * Proficiency in Microsoft Office, AutoCAD, and Revit * Familiarity with mechanical engineering software for calculations and performance analysis Qualifications * Bachelor’s degree in Mechanical or Architectural Engineering * Minimum of 3+ years of relevant industry experience * Engineer in Training (EIT) certification * LEED Accreditation (preferred)

Job Description Company Overview: Vanderweil Engineers is a top-ranked national engineering firm specializing in MEP/FP, Power, and technology systems for a wide range of market sectors. In our 75th year in operation with a staff of 500+ located across nine offices, we are proud to be one of the leading independently owned engineering firms in the country. Our Power Group provides full-service engineering and design solutions for utility, institutional, and commercial clients across the U.S., with a strong focus on reliability, sustainability, and innovation. As part of our continued growth in the Transmission & Distribution sector, we are seeking a skilled and motivated Substation Electrical Engineer with 5+ years of experience to join our multidisciplinary team. This is an opportunity to support the development of critical infrastructure and gain deep technical experience while growing your career alongside an experienced and supportive team. Position Summary: The Substation Electrical Engineer is responsible for executing electrical design and analysis for high-voltage substation projects (up to 345kV) under the mentorship of senior engineering staff. You will engage in all phases of design - from conceptual engineering through construction support - developing technical expertise and contributing to safe, reliable, and code-compliant solutions for utility and industrial clients. If you are looking for meaningful project experience, team-oriented culture, and a path toward professional licensure and technical leadership, we would love to hear from you. Some of your responsibilities include: • Support the electrical design of HV substations through schematic design, design development, and construction documents., • Develop substation layouts, grounding, protection one-lines, and panel schedules using AutoCAD, Inventor and Revit., • Assist with modeling electrical systems and one-line diagrams in CYMCAP, AGI32, SKM or ETAP, performing thermal analysis, basic short circuit, arc flash, and coordination studies., • Prepare design calculations, including voltage drop, grounding, load flow, lighting power density, and illumination levels., • Apply knowledge of NEC, NESC, IBC, ANSI/IEEE, IEC, and client standards in all aspects of design., • Participate in site visits and field investigations to support design development and construction., • Review submittals and respond to RFIs during construction administration., • Collaborate with multi-discipline teams on large-scale substation, mission critical, and utility projects., • Work under the guidance of senior engineers and contribute to mentorship and knowledge-sharing within the team. Essential Skills and Requirements: • Bachelor’s Degree in Electrical Engineering or Technology., • Engineer-in-Training (EIT) certification considered first; willingness to pursue a PE license strongly preferred., • Minimum 5 years of experience in substation, power, or related electrical design roles., • Experience with AutoCAD and Revit for substation design and modeling; familiarity with AutoCAD-3D, Inventor, MicroStation or Bentley is a plus., • Working knowledge of SKM PowerTools, ETAP, or similar system modeling software., • Exposure to AGi32, CYMCAP, and AMPCALC 4 is beneficial., • Solid understanding of ANSI/IEEE, NEC, and NESC code requirements., • Strong verbal and written communication skills., • Familiarity with construction documentation, administration processes, and material selection., • Ability to manage time effectively and contribute to multiple active projects. Our Work Culture: We know that work/life integration is important to our employees. Our hybrid work style (up to 2 days remote per week) allows team members to have flexibility while building their skills through in-person exposure to industry experts. Our wellness programs prioritize our team members’ physical and behavioral health. We are an equal opportunity employer committed to diversity in the workplace. The compensation that we expect to pay for this position is commensurate with experience, education, licensure, skills and location but may range between $80,000 and $120,000. Please connect with us for more details.

Job DescriptionSystems Integration Engineer Direct Hire Opportunity We are recruiting on behalf of our client, a leading manufacturing company, for a Systems Integration Engineer to join their Engineering team. This is a direct hire, full-time position offering excellent growth opportunities. Position OverviewThis engineering position offers an excellent entry point or advancement opportunity. The role involves exposure to various engineering tasks across all project phases, including field work. The successful candidate will work as part of the Test Equipment group and participate in diverse engineering projects while learning products, design concepts, company operations, and industry practices. This is a heavy field work role requiring travel and variable hours according to business needs - it is not a desk job and it is not 9am-5pm. Key Responsibilities • Resolve engineering issues in system integration and manufacturing aligned to project schedules, • Work with System Functions, Functional Interfaces, Electrical/Mechanical Interfaces, Asset Management, and Test Equipment, • Analyze and evaluate electrical schematics, mechanical drawings, pneumatic diagrams, test procedures, and technical documentation, • Plan solution paths and coordinate tasks with multidisciplinary engineering teams, • Generate and maintain asset management documents and official correspondence, • Track project progress and coordinate actions with suppliers and customers, • Participate in technical meetings, witness tests, and document meeting minutes with action items, • Support on-site testing activities, troubleshooting, and field modifications, • Provide engineering support to other departments across all project phases and manufacturing, • Coordinate technical activities with project management groups, • Lead technical discussions in design review meetings, • Provide elevated support for engineering headquarters by offering technical interpretations and faster response solutionsQualificationsEducation:, • Bachelor's degree in Electrical Engineering, Mechanical Engineering, or related engineering/science field, • Master's degree preferredExperience:, • Entry level (1-3 years) to mid-level (5-10 years) engineering experience, • Transportation industry or closely related field experience required, • Experience in system design, systems integration, or project engineering a plus, • Professional Engineer (PE) certification a plusRequired Skills & Competencies, • Practical knowledge in both electrical and mechanical engineering, • Strong problem-solving abilities for both technical and non-technical issues, • Excellent written and verbal communication skills, • Strong schedule management and task management capabilities, • Team player with collaborative mindset, • Commitment to multi-year projects, • Willingness to travel domestically and internationally for business, • Availability outside normal business hours when required, • Experience with federal regulations and official standards (AAR, APTA, IEEE, ASME, EN, MIL, etc.) Employment Details, • Position Type: Direct Hire, Full-time, • Salary: $85,000-95,000 (DOE), • Classification: Exempt, • Department: Engineering, • Reports To: Engineering Manager, • Travel: Required for domestic and international business travel

Job Description Are you ready to unleash your creativity and technical skills? Northern Wolves Inc is searching for a talented HVAC Engineer, Drafter to join our dynamic team! As an HVAC Engineer, Drafter, you will play a crucial role in transforming innovative design concepts into practical, functional HVAC systems that enhance comfort and efficiency. You will collaborate with engineers, architects, and project managers to create detailed drawings and specifications for HVAC installations. Your knack for precision and attention to detail will be essential as you draft plans and ensure they align with our commitment to quality and sustainability. If you’re passionate about drafting and designing cutting-edge HVAC solutions and want to contribute to exciting projects that make a difference in our communities, we would love to have you on board! Responsibilities • Create detailed HVAC drawings using CAD software based on project specifications and designs., • Collaborate with engineers and project teams to understand design requirements and implement feedback., • Produce calculations for load requirements and system performance., • Review and modify designs to comply with industry standards and regulations., • Assist in the preparation of project documentation, including technical specifications and reports., • Participate in project meetings and communicate effectively with team members and clients., • Associate’s or Bachelor’s degree in Mechanical Engineering, Architectural Drafting, or a related field., • Minimum of 2 years of experience in HVAC drafting or engineering., • Proficient in CAD software (AutoCAD, Revit, etc.) and other drafting tools., • Strong understanding of HVAC systems, load calculations, and industry standards., • Excellent attention to detail and problem-solving skills., • Effective communication skills and a collaborative mindset., • Paid Time Off (Vacation, Sick & Public Holidays), • Family Leave (Maternity, Paternity), • Training & Development, • Work From Home, • Free Food & Snacks

Job Description C++ Software Engineer – Real-Time Market Data & Trading Systems Location: Midtown Manhattan (Hybrid – 2 days/week) Overview: A leading technology-driven trading firm is seeking a C++ Software Engineer to join its Real-Time Market Data & Trading Systems team. This group builds performance-critical infrastructure for market connectivity and algorithmic execution. The role is ideal for a developer with a passion for low-latency systems and the desire to work at the intersection of engineering and high-frequency trading. Opportunities exist for technical ownership and future leadership. Core Responsibilities: • Develop and maintain ultra-low-latency, multi-threaded C++ applications, • Build and optimize real-time market data feed handlers and messaging infrastructure, • Contribute to algorithmic execution components and system-level enhancements, • Work with exchange protocols including socket-based APIs and FIX, • 3–10+ years of experience with C++ in high-performance environments, • Deep knowledge of multithreading, memory management, and socket programming, • Prior work on market data systems, trading platforms, or latency-sensitive infrastructure, • Proficient in Linux development environments, • Experience with FIX protocol and/or trading system architecture, • Python scripting familiarity is a plus

Job Description Job title: C++/Rust Engineer - Trading About Keyrock Since our beginnings in 2017, we've grown to be a leading change-maker in the digital asset space, renowned for our partnerships and innovation. Today, we rock with over 180 team members around the world. Our diverse team hails from 42 nationalities, with backgrounds ranging from DeFi natives to PhDs. Predominantly remote, we have hubs in London, Brussels, Singapore and Paris, and host regular online and offline hangouts to keep the crew tight. We are trading on more than 80 exchanges, and working with a wide array of asset issuers. As a well-established market maker, our distinctive expertise led us to expand rapidly. Today, our services span market making, options trading, high-frequency trading, OTC, and DeFi trading desks. But we’re more than a service provider. We’re an initiator. We're pioneers in adopting the Rust Development language for our algorithmic trading, and champions of its use in the industry. We support the growth of Web3 startups through our Accelerator Program. We upgrade ecosystems by injecting liquidity into promising DeFi, RWA, and NFT protocols. And we push the industry's progress with our research and governance initiatives. At Keyrock, we're not just envisioning the future of digital assets. We're actively building it. Mission statement We are seeking a Rust or C++ Engineer with trading experience to join our core Market Making Services team. Our technology stack is built on Rust, Node.js, and Python, and while Rust proficiency is preferred, we welcome strong C++/C engineers who are eager to learn and master Rust. As part of the core Market Making Services engineering team, you will drive continuous improvement in trading infrastructure and system performance. You will join a highly-profitable, fast-paced business unit within Keyrock, where you will be able to make a big impact on the bottom line while collaborating in a global fully remote team. This role is open to candidates located in European or US time zones. Job description * Develop and optimise low-latency options trading systems * Collaborate with quants, traders, and engineers to enhance trading strategies * Maintain and improve trading infrastructure, ensuring high performance and stability * Design and implement efficient, scalable, and resilient trading solutions * Troubleshoot and enhance exchange connectivity and execution speed * Support functional and component testing for critical trading components Background and experience Technical Skills & Experience * Strong experience in Rust and/or C++ (C background also considered) * Prior experience in a trading environment (HFT, Market Making, Prop Trading, or similar) * Eagerness to become an expert in Rust (if not already) * Experience with protobuf-based protocols or similar. * Exchange connectivity experience (strongly preferred) * Experience in High-Frequency Options Trading and low-latency systems (nice to have) Soft Skills & Competencies * Ownership & Reliability – Take full responsibility for your work. Write high-quality, maintainable code, meet deadlines, and follow through on commitments. Anticipate and proactively address potential issues before they arise. * Initiative & Problem-Solving – Approach challenges with a problem-solving entrepreneurial mindset. Make sound, independent judgments and take the initiative to drive solutions rather than waiting for instructions. * Operational Diligence – Respond strategically to technical and operational challenges, ensuring robust and reliable trading infrastructure while instilling confidence in the team’s processes. * Curiosity & Growth Mindset – Continuously seek to improve your technical skills and knowledge. Stay ahead of industry trends and take the initiative to practice and explore new technologies that excite you. * Excellent Communication Skills with a team player mindset, collaborating within a fully remote global team. Our recruitment philosophy We value self-awareness and powerful communication skills in our recruitment process. We seek fiercely passionate people who understand themselves and their career goals. We're after those with the right skills and a conscious choice to join our field. The perfect fit? A crypto enthusiast who’s driven, collaborative, acts with ownership and delivers solid, scalable outcomes. Our offer * A competitive salary package * Autonomy in your time management thanks to flexible working hours and the opportunity to work remotely * The freedom to create your own entrepreneurial experience by being part of a team of people in search of excellence As an employer we are committed to building a positive and collaborative work environment. We welcome employees of all backgrounds, and hire, reward and promote entirely based on merit and performance. Due to the nature of our business and external requirements, we perform background checks on all potential employees, passing which is a prerequisite to join Keyrock.

Job Description Who We Are EarthCam is the global leader in providing webcam content, technology and services. Founded in 1996, EarthCam provides live-streaming video, time-lapse construction cameras, and Software-as-a-Service (SaaS) for AI-powered visual asset management, leveraged through our intuitive Control Center 8 dashboard which integrates with leading project management software. EarthCam leads the industry with the highest resolution imagery available, to empower building information modelling (BIM) and Virtual Design Construction (VDC) teams with actionable visual data. EarthCam's innovations include the world’s first outdoor gigapixel panorama camera system, and the first ever 5G construction camera. EarthCam has documented over a trillion dollars of construction projects around the world. The company is headquartered on a 10-acre campus in northern New Jersey. We are seeking an innovative and team oriented Mechanical Engineer to join our growing team. Responsibilities · Identify deficiencies in mechanical processes and drive improvements · Design and develop prototypes · Analyze and test device prototypes and manage revisions · Supervise junior team members to develop computer-aided design (CAD) drawings · Initiate, develop and manage all project phases · Prepare documentation of critical analysis and provide suggestions for error correction · Collaborate with Project Managers to properly allocate and track resources Requirements Who YOU Are · A creative thinker and innovator · Enjoy using critical thinking skills to solve problems · Driven by teamwork, with excellent interpersonal skills · Effective communicator - both verbal and written · Detail-oriented with solid project management follow-through · Expert time-manager with the drive to meet objectives and key results on time. · Care about the target user, and will develop an astute understanding of the market. Qualifications · 3-5 years experience in engineering · Bachelor’s degree in Mechanical Engineering or related work experience · Familiarity with CAD and other mechanical design software · Knowledge of fluid mechanics, thermodynamics and mechanical engineering concepts · Excellent math skills, including advanced geometry, calculus and physics Benefits What We Offer The EarthCam package includes excellent salaries, bonuses, benefits, and constant opportunities for development – designed to create an entrepreneurial, invigorating and satisfying environment. Our benefits include: · Health insurance (Single coverage 100% paid for by company) · Dental and vision insurance · 401K Plan (with aggressive company matching) · Paid time off, plus paid holidays · Regular free breakfasts, lunches and snacks · Bicycles to ride around campus · Team BBQs and annual company Olympics Recruitment Fraud Disclaimer EarthCam is committed to maintaining a transparent and secure recruitment process. EarthCam communicates with candidates exclusively using EarthCam email addresses and extends job offers solely by telephone. For more information about the EarthCam recruitment process and avoiding fraudulent job offers, please click here.

Job DescriptionAbout Us:Versana is an industry-backed data and technology company on a mission to make the syndicated loan market better. By digitally capturing agent banks’ data on a real-time basis, Versana provides unprecedented transparency into loan level details and portfolio positions, bringing efficiency and velocity to the entire market. Through our centralized platform, participants can rest assured they are accessing the loan market’s most credible source of deal information. With the support of our investors, Versana is fast becoming the technology of choice to usher in the long-awaited transformation of the syndicated loan market. About You:We are seeking a Software Engineer in Test to support the Versana Engineering Team in the development of automation frameworks, and design and development of test scripts to ensure quality and performance of our software applications. The ideal candidate should have a strong background in test automation frameworks, programming skills, creating performance testing frameworks and experience working in Agile development environments.Key Responsibilities • Develop and maintain test automation frameworks and integrate them into CI/CD pipelines., • Support Scrum Teams in API and UI testing on new and existing software and applications., • Review quality related deliverables, provide feedback, and ensure that the project aligns with industry standards and best practices at all stages of application lifecycle., • Collaborate with developers and product managers to understand requirements and create effective test plans., • Develop and maintain performance testing framework and integrate them into CI/CD pipelines., • Work with Domain teams to understand workload models for each system and gather Performance Requirements., • Conduct system performance testing to ensure system reliability, capacity, and scalability., • Create performance test plans and scenarios and develop test scripts in Jmeter/K6 to meet the objectives of the performance test plan., • Perform Load tests using Load Runner and analyze root causes of performance issues and recommend corrective actions., • Analyze test results, identify performance bottlenecks, and provide detailed reports to the development and management team., • Ensure software meets quality standards by working closely with Agile Scrum teams.Must Haves, • Bachelor's degree with 3 years of experiences required., • Strong background in Java and Unit Testing., • Strong background in Performance Testing., • Strong background in web and API testing tools., • Strong organizational, planning and analysis skills., • Prior testing experience in backend testing processes, including large data validation efforts., • Prior experience in Performance test scripting using JMeter, K6, and other tools., • Prior experience working with any APM tool., • Prior experience with Continuous Integration (Jenkins or similar tool) and Continuous Testing.

Job Description We’re seeking a Software Engineer (Frontend / Fullstack) to help craft world-class enterprise software products. This role offers the unique opportunity to contribute as an early team member at a fast-growing startup, shaping our product, design system, and overall customer experience. You will work closely with our founders and leadership team to build solutions that redefine how businesses interact with complex technologies like LLMs (Large Language Models). If you’re passionate about delivering polished, intuitive, and impactful software products, we’d love to hear from you. Requirements Key Responsibilities • Ship World-Class Products: Design, build, and deliver enterprise-grade software with exceptional attention to detail., • Frontend and Design Expertise: Leverage your React, TypeScript, and CSS (Tailwind) expertise to craft modern, user-friendly interfaces with exceptional design precision., • Innovate in a B2B Environment: Bring best-in-class design patterns and UI/UX innovations to business users unfamiliar with modern systems., • Lean Design Systems: Develop and maintain a scalable, lightweight design system that enables designers and engineers to move quickly and effectively., • Collaborate with Leadership: Work closely with our founders and leadership team to align on product direction and deliver solutions that solve complex business challenges., • Operate at All Levels: Balance big-picture thinking with a detail-oriented approach to execution., • Build with AI in Mind: Learn how to make LLMs (Large Language Models) practical for precision work in complex environments. Qualifications • Experience:, • Proven ability to ship high-quality enterprise software, especially at world-class organizations (e.g., Scale, Stripe, Notion, Ramp, Airtable)., • Track record of excellence and high impact in high-agency organizations., • Experience working in B2B environments and delivering intuitive solutions to business users., • Background in early-stage startups, demonstrating grit and adaptability., • Technical Skills:, • Advanced expertise in React, TypeScript, and CSS (Tailwind)., • Ability to design and build software with exceptional attention to detail and craftsmanship., • Soft Skills:, • Strong collaboration and communication skills, including the ability to work closely with cross-functional leadership., • Ownership and accountability for delivering impactful features and solutions., • Mindset:, • A bias for action and willingness to take ownership of multiple areas of the product and business., • A balance of strategic vision with the ability to operate at the lowest level of detail. Nice-to-Have Qualifications • Previous ownership of multiple product and business areas., • Knowledge of or experience working with AI and LLMs., • Educational background in Computer Science What We Offer • The chance to work on a cutting-edge product at the intersection of AI, design, and enterprise software., • A collaborative, fast-paced environment with a high degree of ownership., • Opportunity to shape the direction of the company as an early employee., • Competitive salary, equity, and benefits package.

Job Description Interested in building the next viral IOS app – even bigger than Duolingo? Imagine a world where studying feels like play—where SAT prep is as addictive as scrolling through TikTok or diving into a game of Geoguessr/Trivia Crack. That’s exactly our mission – make learning FUN. And we’re bringing it to life by building Duolingo... for school. We call it Brainblast, and we need YOU to help us build it. We’re turning studying into a game – a cracked out, viral iPhone game. To learn more about our vision & the app, visit brainblast.com. About us: Brainblast is a new product by Smart Nonsense – a media company making learning fun with over 3 billion views generated worldwide. Requirements The Role: This is a fully remote position, open to candidates worldwide. As the sole engineer/dev, you’ll need to take on full-stack responsibilities ensuring smooth front-end and back-end interactions. You will… • Take full ownership of developing, launching, and maintaining the iOS app, • Build rapid prototypes for internal testing 2-3x/week, • Develop an asynchronous game experience where users solve and send math problems to friends., • Implement analytics to track student progress and help users identify weak areas for improvement., • Take ownership of formatting and integrating question banks into the app., • Build a seamless content delivery system for a TikTok-style mobile video course., • Optimize the app for a highly engaging, fast, and smooth learning experience., • Ensure the app is scalable, maintainable, and bug-free through rigorous testing and code reviews. Who you are: You’re not just an executor—you’re an innovator. You thrive on creativity, constantly pushing boundaries with crazy, forward-thinking ideas. You don’t wait for direction—you help define what’s next with a strong sense of urgency. Qualifications: • 3+ years of professional software experience in iOS app development., • Shipped at least one iOS app professionally, • Proficient with Swift, IOS frameworks (UIKit, CoreData, Core Animation, etc.) and IOS SDK performance tools., • Experience with Experience with RESTful APIs & other API integrations, • Knowledge of video streaming and optimization, • Familiarity with Firebase or other backend solutions. 1. Above-market pay, 2. Work from home – No meetings, schedules, or ASAPs. Work whenever, wherever, and however you want., 3. Paid holiday & time off – The best need breaks., 4. Growth opportunities internally Our #1 goal is to work together for decades, not months.

Job Description Overview Half the world still lacks access to essential health services, and even in the most advanced systems, outcomes remain uneven while clinicians face mounting pressure. Every inefficiency and preventable error represents a chance to do better: to save lives, restore time to clinicians, and rebuild trust in healthcare. Medical knowledge is doubling every few months, but the supply of expertise cannot keep pace. At Corti, we believe the only scalable way to solve this is to expand access to medical expertise through specialized AI infrastructure. By embedding our platform into the applications and workflows that clinicians and patients rely on, we help eliminate unnecessary administration, prevent diagnostic mistakes, and make healthcare more affordable, accessible, and ultimately more human again. There is no quality healthcare without a quality dialogue and now, no reliable AI without a robust platform. We need you to help us build both. Why Corti? Corti is becoming the premier infrastructure company for healthcare AI. Unlike general purpose players on the market, our models are trained on real-world healthcare data and delivered through modular, accurate and compliant APIs that developers, innovators, and product teams access easily - and most importantly, trust. We focus on the foundation - serving the builders who are reshaping healthcare. From startups rethinking patient flows to enterprises modernizing legacy systems, Corti provides the safe, reliable intelligence they need to innovate at scale. We thrive on the toughest challenges, from making clinical reasoning more reliable to designing infrastructure that meets the highest global standards for safety and trust. If you’re excited by developer-first design, clinical-grade reliability, and shaping the foundation of healthcare’s future - then Corti is the place for you. The Role We’re already expanding our brand-new Activation Team to transform technical potential into clinical impact—faster. Our mission: accelerate technical activation, remove friction, and spark long-term engagement. As a Developer Relations Engineer, you’ll sit at the crossroads of product, engineering, and customer success. You’ll be the catalyst that transforms new signups into thriving, long-term users of our healthcare API infrastructure. Think of yourself as the bridge between first impressions and enduring value—making sure every customer, whether technical or non-technical, gets started with confidence, efficiency, and impact. This role is at the heart of Corti’s customer journey: you’ll build trust, grow utilization, and uncover opportunities that shape the future of healthcare AI. What you’ll be doing * Drive technical onboarding: Own the customer journey from day one, ensuring seamless integration of our API platform and unlocking maximum value for both named accounts as well as users that sign up through our Product Led Growth funnel. * Be the trusted technical partner: Act as the primary point of contact, proactively troubleshoot issues, and collaborate with internal teams to resolve complex API challenges. * Keep the system healthy: Monitor day-to-day activity in our ticketing system, spotting issues before they become blockers. * Strengthen relationships: Drive customer and partner success through discovery calls, strategic support, and technical growth planning * Build knowledge at scale: Create and maintain documentation, guides, and resources that empower customers to solve problems independently. * Drive product adoption: Promote healthy usage and identify opportunities where customers could benefit from expanded services or solutions. * Fuel go-to-market success: Partner with GTM teams to strengthen technical relationships, set realistic expectations, and foster excitement. * Collaborate cross-functionally: Work daily with Product, Engineering, and GTM teams to ensure customer needs translate into product evolution. What you bring * Experience that counts: 3+ years in technical customer success, support, or similar roles—ideally in API or SaaS environments. * Language skills: Fluency in English and another language would be beneficial (e.g. German, French, Spanish etc.) * Technical fluency: Skilled at troubleshooting, with proficiency in at least one programming language (e.g. Python, JavaScript) and a strong understanding of RESTful APIs. * Clear communicator: Able to break down complex technical concepts for both engineers and non-technical stakeholders. * Curious problem-solver: Eager to tackle challenges, remove roadblocks, and learn continuously. * Adaptability: Thrives in ambiguity, comfortable in fast-paced, evolving environments. * Bonus points: A passion for AI, customer experience, and healthcare innovation. Life at Corti * You will be reporting to VP of Customer Experience * The position is full-time and starts as soon as possible. * Offices in New York, Copenhagen and London * Equipment provided by Corti * Hybrid working Ready to dive into the world of Corti? Hit that 'Apply' button, and let's start working together on reshaping the dialogue in healthcare, making a real difference for millions of patient outcomes around the world. 🤝 Bringing in top talent from all backgrounds is crucial in our pursuit to improve the world of healthcare. We encourage applications from all people and do not discriminate based on race, religion, national origin, gender, sexual orientation, age, and/or disability status. At Corti, experience comes in many forms, and we’re passionate about creating teams with a multitude of perspectives! If you believe your experience is close to what we’re looking for but not an exact match, we still hope you’ll consider applying!

Job DescriptionAbout Nominal Nominal is building the software infrastructure powering the world’s most advanced hardware systems — from spacecraft and autonomous vehicles to next-generation industrial machines. Our platform ingests high-rate telemetry, validates complex autonomy software in real time, and enables engineers to iterate faster without sacrificing safety or precision. We’re a small, fast-moving team of engineers and operators who own problems end-to-end, work across disciplines, and thrive on challenges at the intersection of hardware and software. As a dual-use platform, we serve top-tier commercial and defense customers, including the U.S. Navy, United States Air Force, Shield AI, and Anduril. We’re backed by Sequoia, General Catalyst, Founders Fund, Lux Capital, and Lightspeed Ventures. Our team draws experience from SpaceX, Palantir, Anduril, Applied Intuition, and other leading companies — united by a common mission: enabling hardware engineers to push the boundaries of advanced technology with speed, safety, and precision. We're looking for a Backend Software Engineer, where you'll develop and maintain high-performance distributed systems for processing and storing telemetry data. You will also help design scalable storage solutions, optimize system performance, and collaborate with cross-functional teams to deliver effective data solutions.\uD83D\uDE80 About the role • Build and maintain distributed systems that process and store telemetry and sensor data., • Design scalable storage solutions to manage large, real-time datasets., • Improve system performance and reliability, making sure everything runs smoothly at scale., • Work with engineers from other parts of the company to support specific customer needs., • Help set the technical direction of the backend, sharing your experience to guide early career engineers., • Stay on top of new developments in data engineering and apply what’s useful to improve our platform.⚡ Skills that accelerate us, • 4+ years building and maintaining distributed systems with a focus on performance and reliability., • Strong with languages like Java, Go, or Rust, and comfortable writing clean, maintainable code., • Practical experience with cloud services (AWS, Azure, or GCP) and tools like Docker, Kubernetes, and Terraform., • Understanding of storage solutions—Parquet, Druid, InfluxDB, ClickHouse, TimescaleDB, or similar— and experience with real-time data and telemetry systems., • Familiarity with technologies like Apache Arrow, Kafka, Spark, or Flink, plus experience with distributed databases., • Ability to explain your ideas clearly to others, whether they’re technical or non-technical.✨ Benefits/Perks, • \uD83C\uDFE5 100% coverage of medical, dental, and vision insurance, • \uD83C\uDFD6️ Unlimited PTO and sick leave, • \uD83C\uDF7D️ Free lunch, snacks, and coffee, • \uD83D\uDE80 Professional Development Stipend

Job DescriptionJob Title: Integration Engineer, Conversational AI Platform Location: New York City Salary: $100–$120K Work Authorization: Applicants must be authorized to work in the US. About Kasisto Humanizing Digital Experiences® Kasisto's Digital Experience Platform, KAI, enables financial institutions to deliver the industry's most advanced conversational AI-powered intelligent virtual assistants. Built specifically for banking, KAI supports interactions ranging from simple retail banking to complex corporate and wealth workflows — all with high security, extensibility, and domain fluency. About the Role We're looking for an AI Integration Engineer to join our Implementations team. In this client-facing role, you'll support the implementation of our AI platform by helping connect it with customer systems and environments. You'll work closely with customers to gather requirements, understand contact center workflows, and support system integration. You'll also collaborate with internal product, engineering, and solutions teams to ensure smooth deployments and successful go-lives. This role is ideal for someone passionate about enterprise integrations, conversational AI, Agentic AI, and automation within financial services. What You'll Do • Participate in discovery sessions with customers to understand system requirements, data flows, and operational workflows., • Lead the design and implementation of integrations between the Kasisto platform and customer systems (e.g., CRM, CCaaS, identity providers)., • Support testing, troubleshooting, and deployment of integration components., • Document technical designs, integration specs, and customer configurations., • Collaborate with senior engineers and project leads to deliver high-quality solutions., • Help ensure that customer workflows and business goals are reflected in the deployed solution.What You Need, • Bachelor's degree in Computer Science, Engineering, or a related field (or equivalent practical experience)., • 2–4 years of experience in a software, integration, or implementation engineering role., • Familiarity with APIs (REST), basic scripting or programming concepts (e.g., JavaScript, Java and Python)., • Interest or exposure to AI, automation, or contact center technologies., • Strong communication skills and ability to work directly with external customers., • Ability to learn quickly, take ownership of tasks, and work effectively in a fast-paced team environment.Nice to Have, • Experience working in or with financial services or regulated industries., • Prior work involving SaaS platform integrations., • Familiarity with authentication protocols (OAuth, SAML, JWT, TLS Certificate management) and cloud platforms like AWS.Why Join Us, • Competitive compensation and full benefits package, • Ground floor opportunity in a high-growth, AI-first company, • Hands-on experience in real-world customer environments, • Collaborative, startup-style culture, • Career growth into architecture, delivery, or product roles

Job Description Dual Licensed Operating Engineer - Hospital Department: Operation of Plant Status: Full-Time Shift: Evening (Tues-Sat, 2:00pm - 10:00pm) Compensation: $63 to $64 per hour Position Summary: Are you a skilled and licensed Operating Engineer with expertise in both boiler and air conditioning systems? A leading organization is seeking a dedicated professional to maintain the critical infrastructure that supports its mission. As a Dual Licensed Operating Engineer, you will play a vital role in ensuring the efficient and safe operation of the plant, directly impacting the comfort and well-being of those served. Key Responsibilities: • Compliance and Safety: Install, maintain, inspect, test, and repair systems in strict adherence to regulations from the City of White Plains, State of New York, Westchester County, NYS and County Health Departments, NFPA, The Joint Commission, and other relevant authorities., • Steam Generation Management: Oversee boilers and control the continuous supply of steam for heating, machinery, auxiliary equipment, and processes., • Water Treatment: Perform daily boiler water tests and administer appropriate chemical treatments to maintain optimal levels., • HVAC System Management: Monitor and control all boiler and HVAC equipment using the Building Management System, ensuring optimal performance and efficiency., • Preventive Maintenance and Repair: Inspect, adjust, repair, and lubricate all related steam plant and air conditioning equipment, including DX and centrifugal units., • Cooling Tower Maintenance: Operate and maintain cooling towers, including water treatment., • Routine Maintenance: Change air filters, clean condensing coils, cooling coils, and fan coil units., • Control System Maintenance: Replace or adjust pneumatic and electric controls, motors, and air compressors., • Ventilation System Management: Maintain air dampers, fans, and ventilating systems., • Documentation and Inspections: Perform all required inspections and rounds, maintaining detailed logs of HVAC and boiler unit checks., • General Mechanical Maintenance: Perform other mechanical maintenance work, including machinery and equipment repair, within your skill set., • Team Participation: Attend meetings as required and assist with snow removal efforts. Qualifications: • High School Diploma or equivalent., • Required Licenses:, • NYC High-Pressure Steam License or equivalent (must obtain White Plains First Class License within one year of employment)., • City of White Plains Air Conditioning Refrigeration Operator's License., • City of White Plains First Class Stationary Engineer's License., • Minimum 7 years of hands-on experience in air conditioning refrigeration and high-pressure boiler systems., • Proficiency in welding and pipefitting., • Demonstrated high degree of mechanical aptitude. Join Our Team: If you are a highly skilled and licensed Operating Engineer looking for a challenging and rewarding opportunity, we encourage you to apply. This organization offers a supportive work environment and the chance to contribute to a vital mission.

Job Description Electrical Engineer Job Responsibilities • Design of electrical systems for a variety of projects., • Create plans, schematics, equipment selection, load calculations, systems narratives and specifications, system design and layout, field investigation and construction administration., • Perform design work on auto cad and Revit, • Prepare due diligence and feasibility reports., • Attend meetings with other consultants., • Work in close contact with the entire design team., • Provide engineering support for Senior engineering staff., • Comply with group and company standards and procedures. Qualifications • Bachelor Degree from accredited university in Electrical discipline., • 3+ years of relevant experience in Electrical design., • Proficiency in the latest version of auto cad and Revit, • P.E. or E.I.T. (Desired).

Job DescriptionAbout Us: Versana is an industry-backed data and technology company on a mission to transform the syndicated loan market. By digitally capturing agent banks’ data on a real-time basis, Versana provides unprecedented transparency into loan level details and portfolio positions, bringing efficiency and velocity to the entire market. Through our centralized platform, participants can rest assured they are accessing the loan market’s most credible source of deal information. With the support of our investors, Versana is fast becoming the technology of choice to usher in the modernization of the syndicated loan market. About You: Versana is looking for a motivated Full Stack Software Engineer to join our Application Development squad. The squad’s goal is to create, enhance and maintain Versana’s real-time syndicated loan platform. The application front-end presents a streamlined interface which provides clients access to real-time loan data and positions. The Full Stack Software Engineer will work closely with seasoned technology leaders and colleagues with broad and varied backgrounds in a dynamic, agile environment. You must have a passion for building intuitive applications and a strong understanding of front-end technologies and best practices. You must also have experience in designing, developing, and deploying secure, performant, and scalable backend services in a cloud environment. You will play a key role in all stages of Versana’s data platform development, from ideation through deployment and support.Key Responsibilities: • Develop and own front and back-end applications for our platform., • Work with Product and UX to address client needs with high-impact and high-visibility solutions., • Write clean, maintainable and well-documented code., • Build test automation across the full stack of our software., • Optimize the applications for performance and scalability., • Develop and maintain our design system., • Help setup the technical foundation and culture for the Application Development squad., • Help onboard and mentor new team members.Must Have:, • BS or BA in Computer Science or related field., • 5+ years of full stack development experience (backend with Java/Spring Boot, front-end with React/Angular (TypeScript/JavaScript)., • Good understanding of application architecture and performance optimization., • Adeptness at using build and development tools (Git, Maven/Gradle, Artifactory)., • Experience with REST APIs and GraphQL., • Experience working with Databases (SQL and NoSQL)., • Ability to partner with multi-functional teams and pivot quickly., • Curiosity and willingness to learn new things., • Strong communication, analytical and problem-solving skills. Nice to Have:, • Knowledge of Docker, Kubernetes and CI/CD pipelines., • End-to-end testing knowledge (Cypress/Selenium/Cucumber etc.)., • Exposure to third-party libraries (AG grid, D3 etc.)., • Familiarity with design systems (UI components, animations/transitions, accessibility)., • Experience with public cloud computing., • Knowledge of Syndicated Loans or Leveraged Finance.

Job Description We are seeking a high performing electrical design engineer with leadership aspirations to add to our growing New York office. This role offers the opportunity to manage a variety of projects locally and globally from concept through completion while contributing to the strategic growth of our employee owned firm. You’ll provide technical expertise to project teams, mentor junior staff, and collaborate with firm leadership to deliver high-quality engineering solutions and help drive business development. Job Summary • Design lead for the electrical, lighting, and fire alarm systems, including preparation of all engineering calculations, equipment selection, and layout throughout life of the project, • Write scope of work for electrical design based on preliminary review and meetings with the client, • Prepare drawings and perform system design calculations and reports, • Select equipment for use in building systems, • Analyze operation of existing systems, • Demonstrate creativity, foresight and mature engineering judgment in anticipating and solving problems, • Coordinate all aspects of project document completion within company and externally with clients and other design professionals, • Serve as Project Manager and Technical Lead, • Prepare or review construction budgets based on experience and scope of project, • Supervise staff on multiple projects, provide assertive management, technical leadership and support to team members, verify that all work is completed as planned and scheduled in compliance with client, and company quality assurance practices, • Mentor younger staffQualifications, • Bachelor’s degree from accredited university in electrical engineering or equivalent, • Minimum of 10 years of relevant industry design experience with direct project experience inclusive of spaces such as data centers and / or life science facilities, • Proficiency in the latest version of AutoCAD, Revit, design, and calculation software, • PE preferred, • Strong technical knowledge, • Ability to interface with clients, • Ability to work on several concurrent projects, • Excellent communication skills, • Expert knowledge of design and building codes 7YPxMHLe4Y

Job Description ABOUT US: Buildings in our beautiful cities, where we live and work, are producing 40% of the CO2 going into our atmosphere contributing to global warming. We need to HEAT, VENTILATE, AIR CONDITION our buildings 24/7. Most of the energy consumed in a building is for our comfort and 50% of it is wasted!!! This is because buildings have little to no technology to control this. Parity Inc. is a software as a service (SaaS) designed to reduce energy waste from buildings!! Using advanced algorithms, Parity is able to predict the amount of energy needed ahead of time to operate a building to meet its residents' demand and adapt the building's systems and machinery in real time. We save our customers and building operators: • Time by automating setpoint adjustments and through our mobile platform that provides early alerting services when problems occur, • Money. Parity typically contractually guarantees the savings that we expect to deliver our customers. We provide quarterly and annual energy savings reports. We are looking for a Building Intelligence Engineer based in the New York metro area to join our team and help us to ensure that all client buildings are adapted to work successfully with the Parity platform. Leveraging your background in Engineering and knowledge of HVAC automation/control systems, you will partner with our Sales & Operations teams to ensure that all buildings in our portfolio are quoted, set-up and optimized throughout their time with us. We are looking for someone hungry, eager to learn, and passionate about the energy and Cleantech space! RESPONSIBILITIES: • Conduct on-site assessments of clients’ buildings to develop project scopes including estimated energy savings, installations costs, and utility incentives for Parity’s Optimizer service, • Provide technical support to the Parity sales team during the sales process., • Lead the installation and setup phase of Parity’s service from kickoff to commissioning - managing timelines, budgets, subcontractors, and stakeholder communication to ensure on-time, high-quality delivery., • Coordinate integration between Parity’s cloud platform and on-site controllers/devices; validate software-to-hardware communication in collaboration with Parity’s product team, • Serve as the technical lead during final system commissioning and sign-off—ensuring client expectations, program requirements, and Parity’s quality standards are met., • Prepare and finalize all required design documentation, drawings, and close-out materials for each project., • Act as a regional technical resource for live buildings—supporting Parity’s service delivery team with ongoing troubleshooting, optimization, and customer engagement, • An academic background in Engineering, ideally with a focus or demonstrated interest in HVAC, building automation, or mechanical/electrical engineering, • 5-8 years experience working in at least one of the following areas:, • MEP Engineering, • Building Automation System Design, • Building Automation Installation/Commissioning, • Ability to travel regularly to client sites with NYC’s five boroughs., • Strong communication skills and ability to coordinate effectively with clients, subcontractors, and internal teams., • Self-starter with a growth mindset—eager to take on new responsibilities and thrive in a fast-paced startup environment, • Quick learner who can independently execute and improve on tasks after initial guidance, • Proactive about identifying inefficiencies, filling gaps, and optimizing internal processes, • Preference will be given to candidates with any of the following additional qualifications:, • Experience managing energy retrofit projects, • Experience managing controls projects, • Experience with controls commissioning Join our organization in a key role during a period of tremendous growth and directly contribute to its future success. Contribute to a world-changing product that is working to make the world a better place through reduced CO2 emissions in multifamily buildings. Have the autonomy to learn and grow in a fast-moving, start-up environment. OTHER GREAT STUFF: ● Benefits: Parity offers a comprehensive health benefit package - health is wealth! ● Hybrid Work Environment: This is a hybrid position, with three mandatory in-office days per week. However, it will require time onsite at customer buildings. ● Purpose and Impact: We hire top talent that cares about the social impact and vision, to help make urban living sustainable. It really makes a difference to work alongside a group of individuals who are all dedicated and passionate about creating positive change. ● Training and development: Each employee has a training allowance that can be used however they like, as long as it supports their role or growth within the company. ● Employee Options: Every single employee in the company has the opportunity to participate in our equity incentive plan. Equal Opportunity Employment:Parity is an equal opportunity employer that is committed to diversity, inclusion, and belonging. We are happy to consider all qualified applicants for employment regardless of race, color, religion, sex, sexual orientation, gender identity, national origin, age, disability, protected veterans status, Aboriginal/Native American status or any other legally-protected factors. If you require accommodation during the recruitment process, including alternate formats of materials, accessible meeting rooms, or other accommodations, please let us know and we will work with you to meet your needs. Parity welcomes and encourages applications from people with disabilities. Accommodations are available upon request for candidates taking part in all aspects of the selection process. Powered by JazzHR dmOMZDuyEZ

Job DescriptionCareer Renew is recruiting for one of its clients a Rust Solana Engineer - this is a fully remote role for US or Europe candidates (if they can overlap with EST timezone). Our mission is to democratize access to opportunity. Since launching in April 2025, creators have already generated over $50 million to bring their visions to life using us. * We optimize for talent density over headcount (we will not exceed a team size of 10 for as long as possible) * We are already highly profitable (we will likely never raise venture capital money) * We intend to bring fast liquidity for team members via coin ownership (legacy stock option system is dying) About you: * Strong proficiency in Rust, particularly in the context of blockchain development. * Deep experience with Solana * Passion for clean code, testing, and documentation. * Comfortable working in a remote, async-first team. * You live to build, you do not build to live * You can balance perfection and shipping fast * You are available to grind 80 hour weeks as needed

Job Description Senior Data Engineer $150k - $170k Company Description We are a leading cloud-based mobile patient intake and registration system. Our platform allows patients to complete their paperwork from the comfort of their own homes using their smartphones or computers, minimizing in-person contact and streamlining the check-in process. With our fully customizable patient scheduling, intake, and payment platform, you can maximize efficiency and minimize waiting room activity. Our patient engagement solution also syncs seamlessly with your EMR system to keep records updated in real-time. Role Description This is a full-time position for a Senior Data Engineer. As a Senior Data Engineer, you will be responsible for the day-to-day tasks associated with data engineering, including data modeling, ETL (Extract Transform Load), data warehousing, and data analytics. This is a hybrid role, with the majority of work located in the New York City office but with flexibility for some remote work. Qualifications • Data Engineering, Data Modeling, and ETL (Extract Transform Load) skills, • Data Warehousing and Data Analytics skills, • Experience with cloud-based data solutions, • Strong problem-solving and analytical skills, • Proficiency in programming languages such as Python, PySpark or Java, • Experience with SQL and database management systems, • Knowledge of healthcare data requirements and regulations is a plus, • Bachelor's degree in Computer Science, Engineering, or related field If interested, please send your resume to:

Job DescriptionSalary: $110,000 - $140,000 New York Peace of Mind Technologies (POM), is currently searching for a qualified, enthusiastic, hard-working and driven Sales Engineer that embodies POM core values to join our Company. About You You are a technically minded, solutions-driven professional with a collaborative and customer-focused personality. You excel at translating complex technical requirements into clear, value-driven solutions, ensuring both accuracy and client satisfaction. You thrive in a team environment, naturally bridging the gap between technical design and sales strategy. Detail-oriented, innovative, and proactive, you stay ahead of industry trends and take ownership of delivering solutions that are not only technically sound but also commercially competitive and aligned with client needs. About Us Peace of Mind Technologies, LLC (POM) is New Yorks premier systems integrator for security and surveillance technology. Specializing in high-tech systems, cloud-based software services and audio/video solutions for thousands of businesses, schools and properties in the greater New York Metropolitan area, POMs diverse client roster comprises a wide range of prestigious and well-known organizations. Founded in 2002, POM has handled thousands of site installations, primarily focused on large offices, retail, hospitality, health care, education, and real estate (commercial, luxury residential and hi-rise). Position Overview The Sales Engineer supports the sales and estimating process by providing technical expertise, system design guidance, and solution development for commercial low-voltage projectsincluding Audio Visual (AV), Security (CCTV, Access Control, Intercom), and Telecom infrastructure systems. Working closely with the sales team, this role bridges client needs and engineered solutions to ensure proposals are accurate, competitive, and aligned with customer expectations. Sales Engineers partner with Sales to translate technical requirements into clear, value-driven solutions that meet both client goals and operational capabilities. The Sales Engineer ensures technical accuracy and feasibility, while Sales leads client relationships and deal strategy, together delivering proposals that reflect both technical excellence and commercial integrity. Key Responsibilities Pre-Sales Support • Participate in client meetings, site surveys, and needs assessments to identify technical and operational requirements., • Provide technical input and product recommendations to sales and estimating teams., • Support creation of proposals, RFP responses, and presentation materials., • Translate conceptual designs into accurate system schematics and scope descriptions., • Assist with Bill of Materials (BOM) creation and equipment selection., • Review drawings and submittals for technical accuracy and value engineering opportunities., • Conduct technical presentations and system demonstrations for clients, architects, and consultants., • Collaborate with sales leadership to develop standard system packages and solution templates., • Stay current on industry trends, product developments, and emerging technologies., • Work with Operations and Design to ensure seamless project handoffs and accurate documentation., • Partner with Procurement for long-lead items and product substitutions., • Collaborate with the Estimating to develop accurate and competitive proposals for security and audio-visual projects., • Prepare cost estimates, labor calculations, equipment selections, and project pricing in alignment with company margin targets and client expectations., • Support the development of RFP responses, bid submissions, and formal quotations, ensuring accuracy, completeness, and alignment with industry standards. Qualifications & Skills • Bachelors degree in Engineering, Technology, or a related field (or equivalent experience)., • 35 years of experience in system design, sales engineering, or technical sales within the AV, Security, or Telecom industry., • Strong knowledge of Division 27/28 standards, industry codes, and integration best practices., • Proficiency with design and estimating tools such as AutoCAD, Bluebeam, D-Tools, or similar platforms., • Excellent communication and presentation skills; able to explain technical concepts to non-technical audiences., • Detail-oriented with strong analytical, organizational, and problem-solving skills., • Ability to manage multiple priorities in a fast-paced, deadline-driven environment., • Manufacturer certifications (e.g., Crestron, Exacq, Avigilon, Axis, Biamp, or BICSI) a plus. Does this sound like you? Benefits Include: • Annual base salary $110,000 - $140,000, • Health benefits package, • Dental & Vision Insurance, • Company Sponsored Life Insurance Plan, • Voluntary Disability Plans, • 401k plan with matching, • Generous paid-time-off policy, • 5 Paid Sick Days, • Pre-tax commuter benefit We are an equal opportunity employer, and all qualified applicants will receive consideration for employment without regard to race, color, religion, age, sex, national origin, disability status, genetics, protected veteran status, sexual orientation, gender identity or expression, or any other characteristic protected by federal, state or local laws.

About NYC Health + Hospitals NYC Health + Hospitals is the largest public health care system in the United States. We provide essential outpatient, inpatient and home-based services to more than one million New Yorkers every year across the city’s five boroughs. Our large health system consists of ambulatory centers, acute care centers, post-acute care/long-term care, rehabilitation programs, Home Care, and Correctional Health Services. Our diverse workforce is uniquely focused on empowering New Yorkers. At NYC Health + Hospitals, our mission is to deliver high quality care health services, without exception. Every employee takes a person-centered approach that exemplifies the ICARE values (Integrity, Compassion, Accountability, Respect, and Excellence) through empathic communication and partnerships between all persons. Work Shifts 8:00 A.M – 4:00 P.M Duties & Responsibilities Purpose of Position Under general supervision of the Director, Engineering and Support Services, assists in planning, directing, coordinating and evaluating capital programs of the Corporation, including General Construction, Telecommunications, Energy Conservation and other Engineering Support Programs. In collaboration with the Director, formulates and evaluates programs and projects of the office and supervises the functional programming activities of discrete units directed toward accomplishing the division’s objectives. Examples of Typical Tasks • Plans and develops engineering projects concerned with problems which have a major impact on the operation and function of a designated unit., • Directs, coordinates and maintains control over project assignments and related activities., • Prepares reports, develops and prepares engineering management audits, studies, surveys for Director of Engineering and Support Services and/or other Corporate officers detailing proposed new programs, statistical studies, leasing property, health facilities planning with recommendations and other data as required. Monitors progress and implementation of approved recommendations., • Maintains liaison with Federal, State and City agencies pertaining to engineering design, construction and other related areas., • Plans and implements programs to establish performance standards to attain increased productivity and accountability., • Supervises project activities through the assignment of qualified key personnel by establishing and maintaining project budget, equipment, material supplies and necessary services and by obtaining and furnishing personnel with basic job information., • Attends staff meetings, reviews capital and expense budget submissions and provides recommendations regarding proposed projects and programs., • Participates in collecting and providing management information to record and report status of projects, assignment and cost by Capital Budget Control and other departments., • May provide consultation services to Executive Directors pertaining to engineering, construction design projects and other engineering support programs and functions., • Coordinates efforts and cooperates with Departmental Managers and Directors on matters of mutual concern and extends functional guidance and assistance., • Participates in developing and preparing standard methods and procedures for implementation of maintenance operations, construction contracts, capital projects development and support service program activities. Provides technical assistance in review of existing maintenance and engineering procedures, service and construction contracts and preventative maintenance for all Corporate facilities. Minimum Qualifications • Qualification for Central Office. Qualification for Health Care Facilities. 1. A Baccalaureate Degree in Engineering or Architecture from an accredited college or university; or,, 2. New York State licensure as a Professional Engineer or Registered Architect; and,, 3. Five years of experience in Construction, Design, Engineering or related fields in a health care environment, including three* or two# years in a supervisory capacity; or,, 4. A satisfactory equivalent combination of education, training and experience. Department Preferences • Bachelor's degree in Architecture, Engineering, Industrial Engineering, Contruction Management or an approved related discipline from an accredited college or university Benefits NYC Health and Hospitals offers a competitive benefits package that includes: • Comprehensive Health Benefits for employees hired to work 20+ hrs. per week, • Retirement Savings and Pension Plans, • Paid Holidays and Vacation in accordance with employees' Collectively bargained contracts, • Loan Forgiveness Programs for eligible employees, • College tuition discounts and professional development opportunities, • College Savings Program, • Union Benefits for eligible titles, • Multiple employee discounts programs, • Commuter Benefits Programs

Job DescriptionDescription: Description • Install, wire, program and maintain Crestron control systems, • Install completely new Crestron audio systems via Dante., • Program and maintain video-walls by most popular brand manufacturers, i.e., Planar, Sony, Dak, Crimson applying pre-designed presets using Crestron control over IP., • Integration troubleshooting of systems as well as making design suggestions and upgrades (hardware/firmware) where needed., • Extron Control Professional, Crestron 4K Engineer and Designer, as well as CTS certified., • Typical duties included programming Crestron, AMX, Extron, QSC, Biamp, ClearOne and other systems making additions and firmware updates to all where needed., • No limitation regarding large or small systems. Crestron: • Logitech Tap, Teams Room, Polycom HDX systems and Crestron Zoom Room systems on integrated designs.

Job Description This is a on-site job in NY The Role We’re looking for a Frontend Engineer to lead the design and development of interfaces that feel magical — fast, intuitive, and AI-native. This is a high-impact role working closely with Metal’s founders, GTM team, and fellow engineers to push the boundaries of what’s possible with large language models and real-time investor workflows. You’ll work across the stack (primarily in React (Next.js) and Tailwind CSS) to build powerful, elegant user experiences. You'll also have the opportunity to integrate directly with our GenAI infrastructure — including a Vespa-powered vector database, agents platform, and more — helping define new UI paradigms that make our intelligence platform feel like an extension of our users' minds. What You'll Do • Own core parts of the frontend stack and user interface, • Collaborate with design and product to rapidly prototype new AI-native workflows, • Implement clean, maintainable components with Next.js, Tailwind, and React, • Contribute to system-wide architecture decisions as we scale, • Work across the stack (FE, API, etc) to deliver seamless experiences, • Drive performance, accessibility, and usability improvements, • Shape the company’s engineering culture and standards as an early team member What We’re Looking For • 3+ years of experience building modern web applications, • Deep expertise in React, Next.js, and component-driven UI design, • Strong design sensibility and attention to detail, • Excited by fast iteration and rapid prototyping, • Passion for performance and pushing the limits of browser-based UX, • Experience working with or around AI products is a plus, • Entrepreneurial mindset — proactive, adaptable, and outcome-oriented, • Based in NYC or open to relocating — we believe great product gets built in person Our Stack • Frontend: React (Next.js), Tailwind CSS, • Backend: Go, MongoDB, • AI infra: Vespa.ai, Model APIs (OpenAI, Anthropic, etc), Agent orchestration, • Infra: Vercel, AWS, GitHub Actions Benefits & Compensation We believe in hiring great people and rewarding them with competitive compensation. For this role, you can expect: Salary: $150,000 – $180,000 USD, depending on experience Equity: Meaningful early-stage ownership in Metal Health Benefits: Comprehensive medical, dental, and vision coverage

Job DescriptionNote: At this time, we are not able to offer visa sponsorship. Candidates must be authorized to work in the United States without the need for current or future sponsorship. N1 Health is an AI Platform company that helps healthcare organizations prioritize, action, and maximize patient and member interactions. N1 Health’s market-leading Applied AI Platform provides healthcare companies with pre-packaged models, curated third party data, and a secure and scalable technology platform that enables the deployment of targeted services at the individual, household, and neighborhood level. Data science-driven insights lead to relevant, specific, and help-first interventions that optimally connect individuals to resources based on their specific needs and the capacity of the system. Only 20% of a person’s health outcomes are driven by their interactions with the health care system, the remaining 80% are driven by external factors. We’re working to empower our customers to utilize data science and digital technologies to better serve their most vulnerable members and patients. We’re passionate, creative, and motivated and looking for team members who are the same. We are enthusiastic learners and believe fundamentally that this is a two-way street - we’ll invest in your learning and growth, just as you’ll advance the company’s mission and support our clients through your work. Role Overview We are seeking a skilled and motivated Data Ops Engineer to join our Technology Enabled Service Delivery function. In this role you will be tasked with managing the broad complexity of healthcare data and creating scalable solutions to deliver to end users. As a client-facing engineer, you will work on teams of data scientists, project managers, and expert staff to manage and understand client data, and will own data specifications, schema design, data pipelines, and ML pipelines for these teams using Python, SQL and CLI tools to maintain, automate and scale your solutions. In this role, you will also think creatively about building new tools that drive innovation for delivering consistent and reliable results, add value to your N1 teams and clients, and communicate with stakeholders about how best to deploy them to drive meaningful healthcare outcomes.. We are looking for motivated teammates who are ready to learn and grow. The Ideal Candidate • Has a demonstrated ability to work on complex projects with multiple stakeholders, • Is a proactive team-player who takes ownership and initiative on a variety of problems, • Has the ability to tell a compelling data-driven story, • Has strong written and verbal communication skills with both technical and non-technical audiences, • Bachelor's degree or education in computer science/related field, • 0-2 years of prior software engineering experience, • Proficiency in Python and SQL, or demonstrated ability to learn new languages quickly, • Proficiency using GitHub for collaborative development, • Familiarity with Agile product development, and tools such as Jira, Confluence, etc., • Excellent troubleshooting and debugging skills, • Experience working with AWS/Athena or similar cloud computing platforms (a plus), • Familiarity with Linux/CLI tools (a plus)BonusEquityIf you are excited about a role but your experience doesn’t seem to align perfectly with every element of the job description, we encourage you to apply. You may be just the right candidate for this, or one of our many other roles. We celebrate diversity and are committed to creating an inclusive environment for all employees. N1 Health is proud to be an Equal Opportunity Employer. Our vision is to foster an environment in which all N1 Health employees of diverse backgrounds and identities feel supported and empowered through the ongoing development of a shared, inclusive culture. We do not discriminate on the basis of race, religion, color, national origin, gender, gender identity, sexual orientation, age, marital status, disability, protected veteran status, or any other legally protected characteristics.

Job DescriptionAbout the role We are looking for a generalist senior frontend engineer to join our early team in New York City. This role will work closely with our product and design team as well as the rest of our engineering team to build the user-facing aspects of the Starbridge platform. You'll figure out ways to build highly performant, stable frontends that allow us to explain technical concepts to non-technical users and create structures that allow us to build and iterate quickly and be responsive to customer feedback. You might be a fit if you: * Have 7+ years of software engineering experience working on modern web ecosystems. * Have 5+ years of experience with React, Typescript, Javascript, RESTful API, CSS, and other front-end technologies. * Are a team player who is excited to do what it takes to make the team successful. You're proactive both in how you work and how you communicate. * Are comfortable in a work environment that blends sync and async communication and work. * Set the highest possible UX and UI bar for the work you do. * Understands how code can affect performance and how to measure and optimize the work you do. * Are excited to build an in-person culture with us. Preferably, you also have experience with at least some of the following: * Experience as a technical lead making architectural design decisions. * Github CI/CD. After submitting your application, the team reviews your CV and statement of exceptional work. If your application passes this stage, you will be invited to a 20-minute phone interview during which a member of our team will make sure you're a good fit for the role. You will have the opportunity ask questions and learn more about the role as well. If you clear the initial phone interview, you will enter the main process, which consists of three interviews: * Experience, theory, and system design. * Live coding. * Product thinking and past work. Our goal is to finish the process within one week. All interviews will be conducted via Zoom. Why Join Starbridge * Ownership: You’ll play a foundational role in building our product and design culture * Autonomy: You’ll have space to experiment, iterate, and influence the roadmap * Trajectory: We’re seeing real traction and scaling fast. Revenue is doubling monthly! * Team: You’ll work with sharp, low-ego teammates who care deeply about craft and industry * Mission: Help modern companies sell into a $1.5T public sector with better intelligence About Starbridge At Starbridge, our mission is to catalyze a new era of public‑private partnerships in the $1.5T State, Local, and Education (SLED) market. We build tools that help companies identify early buying signals — from job changes to board meeting mentions — and reach the right person at the right time. Benefits include: * Competitive salary + early-stage equity * NYC office with snacks + free lunch * Health, dental, and vision insurance * Unlimited PTO * Regular offsites (NYC + beyond) Compensation Range: $180K - $220K

Job Description About Voyant Voyant Photonics, based in the heart of New York City, is transforming machine perception with a new class of LiDAR devices that are compact enough to fit in the palm of your hand and powerful enough to measure range, velocity, and reflectivity with unparalleled accuracy. By leveraging cutting-edge silicon photonic chips smaller than your fingertip, we deliver sensors that are not only revolutionary in performance but also affordable enough to integrate into any system. Our technology disrupts the status quo of bulky, expensive, and power-hungry LiDAR systems, making high-precision sensing accessible for widespread adoption in robotics, autonomous vehicles, drones, industrial automation, and beyond. Position Overview We’re looking for a Photonic Layout Engineer to support the design and development of advanced photonic integrated circuits (PICs) for our FMCW LiDAR systems. In this role, you’ll translate schematic designs into manufacturable layouts, integrating complex passive and active photonic components alongside electrical and mechanical interfaces. You’ll work extensively with GDSII layouts and use Python scripting to automate and streamline layout and verification processes, including DRC and LVS. Experience with PIC layout is important, as you’ll contribute to high-density, high-performance photonic chips that push the limits of integration. You’ll start by working closely with two senior silicon photonics designers. As the team grows, you’ll collaborate with additional layout engineers, photonics designers, and modeling engineers. The role offers a clear growth path—from owning small test structures to eventually managing full tapeout submissions. Location: NYC preferred, with remote options available. If you're open to relocating, we’re happy to support you through the process. Responsibilities: * Own the layout of photonic integrated circuits (PICs) from concept through tapeout Create and maintain a library of parameterized photonic component cells (PCells) * Integrate photonic and electronic layouts (co-layout) for heterogeneous integration * Implement photonic design rules and ensure compliance with foundry-specific PDK constraints * Collaborate closely with the photonics design, systems, test, and packaging teams to deliver manufacturable, testable, and high-performance PIC designs * Implement waveguide routing, die- and reticle-level floorplanning, and integration with electronic and packaging interfaces * Develop and maintain layout automation scripts * Run and debug physical verification checks, including DRC, LVS, and optical connectivity (netlist-driven or netlist-free) * Help define and shape internal layout flows, documentation standards, and review processes * Work hands-on with foundry deliverables, including GDS generation and fab communication Qualifications * B.S. or M.S. in Electrical Engineering, Physics, Optical Engineering, or a related field * 2+ years of experience in photonic layout, preferably in silicon photonics or a similar platform * Proficiency with Python-based layout tools such as GDSFactory, IPKISS, and KLayout * Strong scripting skills in Python * Familiarity with photonic foundry PDKs, tapeout processes, and custom photonic components * Strong attention to detail, excellent documentation skills, and experience working in a cross-functional engineering environment Preferred Qualifications * Proficiency with Cadence Virtuoso and SKILL, with experience in analog and/or digital IC layout * Experience with co-packaged optics and heterogeneously integrated PICs * Understanding of wafer-scale testing and packaging constraints as they relate to layout * Familiarity with electrical layout and EDA integration for optoelectronic devices What We Offer * Competitive salary and meaningful equity package * Comprehensive health benefits (Medical, Dental, Vision) * Unlimited PTO and paid company holidays * Team events and company meetups * Hybrid or remote work environment with monthly travel for remote employees. * Complimentary lunch provided daily at our NYC office Equal Opportunity Employer Voyant Photonics is an equal opportunity employer committed to building a diverse and inclusive workplace. We welcome applicants from all backgrounds and do not discriminate based on race, color, religion, gender, gender identity or expression, sexual orientation, pregnancy, marital or partnership status, age, national origin, citizenship, veteran or military status, disability, medical condition, genetic information, caregiver status, or any other characteristic protected by law.

Job Description THE ORGANIZATION The Center for Justice Innovation is a nonprofit organization dedicated to advancing community safety and racial justice. Since 1996, we’ve worked alongside communities, courts, and those most directly affected by the justice system to build stronger, healthier, and more equitable neighborhoods. With a team of over 900 staff and an annual budget of $130 million, the Center carries out its mission through three core strategies: • Operating Programs that pilot new ideas and address local challenges;, • Conducting original research to evaluate what works—and what doesn’t; and THE OPPORTUNITY Staten Island Justice Center (SIJC) seeks to re-engineer the experience of criminal court in Staten Island, New York, by providing judges and attorneys meaningful alternatives to bail, fines, and jail sentences. Operating out of Richmond County Criminal Court along with community-based offices, SIJC is a team of social service providers, court-based resource coordinators, mental health practitioners, compliance specialists, and others who seek to improve the quality of justice. Supervised Release offers an alternative to jail by providing pretrial supervision, case management, and voluntary social services to people charged with misdemeanor and felony offenses, and in doing so, uses an arrest as a window of opportunity to change the direction of a participant’s life, avoiding the harmful effects of incarceration. Program participants are monitored to ensure their appearance at court dates and mandatory programming, and receive referrals to services like job training, drug treatment, and mental health counseling. SIJC is seeking a Clinician, Supervised Release Program (SRP). Reporting to the Clinical Director, the Clinician, SRP will be licensed a social worker and mental health practitioner responsible for providing therapeutically-informed support to participants. This position will leverage exemplary clinical and interpersonal skills to provide clinical support to participants enrolled in the program. Specifically, the Clinician, SRP will facilitate CBT-informed sessions for all Tier 2 participants, provide short-term counseling for any participant identified as a strong candidate for mental health support, and external referrals to therapy, as appropriate. This position provides hours towards LCSW accreditation. The Clinician, SRP will not carry a standard SRP caseload. Rather, they will work closely with the case management and specialty in-house referral teams to case conference about participants' strengths and needs and coordinate tailored support as appropriate. The Clinician, SRP will work with other SRP teams to ensure access to, completion of, and accurate data entry for CBT and other therapeutically-informed sessions to ensure these sessions count toward participants’ compliance status. Responsibilities include but are not limited to: • Responsible for facilitating CBT-informed sessions for all Tier 2 participants;, • Provide “counseling lite,” a limited counseling structure of 5-10 sessions and subsequent referrals to external therapy providers, as appropriate;, • Maintain accurate and timely data entry and case documentation aligned with the program model, court reporting obligations, and best practices;, • Responsible for consistent and effective cross-team communication and collaboration to proactively identify successes, challenges, and opportunities to strengthen programming, create opportunities for meaningful collaboration, and maximize internal and external resources and expertise;, • Responsible for ensuring participant access to, completion of, and accurate data entry for CBT and other therapeutically-informed sessions to ensure participants’ completion of these sessions counts toward their compliance status;, • Responsible for working effectively with the case management and compliance teams to ensure accurate and timely court reporting;, • Co-facilitate pro-social and psycho-educational groups for participants in collaboration with SRP Clinicians;, • Maintain professional and positive relationships with court staff, judges, and attorneys;, • Participate in individual, group supervision, and regular staff trainings to develop program expertise and related skill sets;, • Attend project events, community events, and meetings after house, as needed;, • This is a non-caseload carrying position;, • Additional relevant tasks, as necessary.Qualifications:, • A Master's degree in a mental health field and 2 years direct practice (e.g. therapeutic or case management) experience required; license is strongly preferred;, • Experience in pretrial, court-based, or criminal legal system strongly preferred;, • Experience in SRP preferred but not required;, • Must be detail-oriented with strong organizational and time management skills;, • Must be able to work effectively independently and as part of a highly interdependent, multi-disciplinary team within a fast-paced and dynamic work environment;, • Professional demeanor and ability to work collaboratively and effectively with a variety of program stakeholders, including judges, prosecutors, defense attorneys, court staff, and site partner agencies; Position Location: Staten Island, NY Compensation: The compensation range for this position is $58,500 - $73,500 and is commensurate with experience. Benefits: The Center for Justice Innovation offers an excellent benefits package including comprehensive healthcare with a national network, free basic dental coverage, vision insurance, short-term and long-term disability, life insurance, and flexible spending accounts including commuter FSA. We prioritize mental health care for our staff and offer services like Talkspace and Ginger through our healthcare plans. We offer a 403(b) retirement plan with a two-to-one employer contribution up to 5%. The Center for Justice Innovation is an equal opportunity employer committed to fostering an inclusive and diverse workplace. We do not discriminate based on race, color, religion, gender identity, gender expression, pregnancy, national origin, age, military service eligibility, veteran status, sexual orientation, marital status, disability, or any other category protected by law. We strongly encourage and welcome applications from women, people of color, members of the LGBTQ+ community, and individuals with prior contact with the criminal justice system. Our goal is to create a supportive and respectful environment where everyone, regardless of background or identity, feels valued and included. At this time, the Center is unable to sponsor or take over sponsorship of an employment visa. All applicants must be legally authorized to work in the United States at the time of application and throughout the duration of employment. Candidates are expected to provide accurate and truthful information throughout the hiring process. Any misrepresentation, falsification, or omission of material facts may result in disqualification from consideration, withdrawal of an offer, or termination of employment, regardless of when discovered. In compliance with federal law, all hires must verify their identity and eligibility to work in the United States and complete the required employment verification form upon hire. Please refer to the job posting for relevant contact information. If contact details are not provided, we kindly ask that you refrain from inquiries via phone or email, as only shortlisted candidates will be contacted. Powered by JazzHR sJQb9vseoH

Job Description Enabling safe and rewarding digital lives for genuine people, everywhere We make it our mission to ensure more genuine people have digital access to opportunities, and businesses have access to more genuine people. Our technology draws on diverse and reliable data to create a single point of truth for identity and address verification. With over 30 years of experience behind us our team and technology are focused on enabling safe and rewarding digital lives for everyone. Regardless of age, location or background, genuine people everywhere should be able to digitally prove who they are and where they live. About the team and role Solutions Engineering Team, GBG Americas At GBG Americas, our Solutions Engineering team is a high-impact, technically adept group that plays a strategic role in driving business growth. This team serves as a critical bridge between our advanced identity, fraud, and verification technologies and the evolving needs of our customers. Our Solutions Engineers are trusted advisors, partnering closely with Sales to design and deliver tailored solutions that solve real-world challenges. With deep technical expertise and a strong understanding of the sales cycle, they ensure that GBG’s offerings are positioned effectively and implemented seamlessly. Key Highlights: • Collaborate cross-functionally to align technical capabilities with client objectives., • Support the full sales lifecycle with compelling solution design, demos, and proof-of-concepts. The Role We’re looking for a Senior Sales Solution Engineer to support sales teams by providing business insights, technical expertise, solution demonstrations, and tailored product presentations in the realm of identity, fraud and verification services. This role will work closely with sales, product, and technical teams to ensure client requirements are accurately met. What you will do • Lead discovery conversations to uncover customer business objectives, pain points, and success criteria that drive purchasing decisions, • Qualify opportunities by establishing technical win criteria and identifying decision-makers, evaluation processes, and competitive landscapes, • Conduct value-based demonstrations tailored to specific customer use cases, showcasing ROI and business impact rather than just features, • Manage proof-of-concept engagements with clear success criteria tied to customer business outcomes and purchase decisions, • Deliver compelling solution presentations that connect GBG's technical capabilities to specific customer business challenges and goals, • Lead technical evaluations, including RFP responses, technical due diligence, and solution architecture discussions, • Collaborate with Product teams to communicate market feedback and customer requirements that influence product roadmap decisions Skills we are looking for • Proficient years of presales/solutions engineering experience in B2B SaaS environments with demonstrated revenue impact, • Software development background with hands-on experience in programming and system architecture, • API expertise, including RESTful services, integration patterns, and technical implementation, • Market knowledge of identity, fraud, and risk markets, including regulatory requirements and industry challenges, focus in Documents and Biometrics, a bonus, • Consultative selling expertise with proven ability to conduct discovery conversations and uncover business drivers, • Executive communication skills with the ability to present ROI and business value to C-level stakeholders, • Consulting background with experience advising clients on technical solutions, • Experience with identity verification, fraud prevention, or compliance technologies, • Familiarity with value-based selling methodologies (MEDDIC, SPIN, Challenger, etc.), • Advanced skills with CRM platforms (Salesforce) and sales automation tools, • Experience with the development and troubleshooting of APIs, SDKs, and complex architectures Benefits To find out more As an equal opportunity employer, we are dedicated to creating a diverse and inclusive workplace where everyone feels valued and empowered. Please inform your GBG Talent Attraction Partner if you require any reasonable adjustments to the interview process. To chat to the Talent Attraction team and find out more about our benefits and why we’re a great place to work, drop an email to and we’ll be in touch. You can also find out more about careers at GBG and check out our current opportunities at gbgplc.com/careers.