Offres system engineer à Houston, TexasCréer des alertes d'emploi

Bearings Plus, part of Dover Precision Components, is hiring a Quality Supervisor. We offer competitive pay and benefits and the ability to be a key team member within our manufacturing organization. Be a part of a growing (organically and through acquisitions) and innovative company. Bearings Plus is the aftermarket arm of Waukesha Bearings, a leader in the repair, replacement and upgrade of fluid film bearings and seals. We are part of Dover Corporation, known for our marketplace leadership and stability. The ideal candidate will possess strong experience in root cause analysis, ISO quality systems, supplier quality management, Lean Manufacturing, Six Sigma methodologies, and precision machining processes. This leader will work closely with Production, Manufacturing Engineering, Applications Engineering, Supply Chain, and Sales teams to improve product quality, reduce defects, strengthen supplier performance, and enhance customer satisfaction. This position supervises approximately 4 Quality Technicians on 1st shift. WHAT YOU’LL DO We are seeking an experienced and results-oriented Quality Supervisor, to lead quality assurance and quality management system activities within our turbomachinery repair and precision machining operation. This position is responsible for ensuring compliance with customer requirements, ISO standards, internal quality procedures, and regulatory requirements, while driving a culture of continuous improvement throughout the organization. Responsibilities include: • Lead daily quality assurance activities to ensure products and services meet customer, regulatory, and company requirements., • Supervise and develop Quality Inspectors while promoting a culture of accountability, continuous improvement, and operational excellence., • Serve as a key leader in maintaining and improving the company’s ISO Quality Management System (QMS)., • Ensure compliance with ISO standards, quality procedures, work instructions, and customer-specific requirements., • Coordinate and lead internal audits, external audits, customer audits, and certification audits., • Drive root cause investigations using structured problem-solving methodologies such as 8D, 5 Why Analysis, Fishbone Diagrams, Fault Tree Analysis, and Corrective and Preventive Actions (CAPA)., • Lead corrective action efforts and verify effectiveness of implemented solutions., • Analyze quality performance data and develop action plans to improve key quality metrics., • Partner with Manufacturing Engineering, Applications Engineering, and Production teams to reduce scrap, rework, customer escapes, and process variation., • Lead supplier quality initiatives including supplier audits, supplier corrective actions, supplier performance reviews, and supplier development programs., • Support incoming, in-process, and final inspection processes to ensure compliance with engineering drawings, specifications, and customer requirements., • Review and disposition nonconforming material, while ensuring timely containment and corrective actions., • Support customer complaint investigations and provide timely responses to customer quality concerns., • Develop and maintain quality metrics, dashboards, and Key Performance Indicators (KPIs)., • Drive Lean Manufacturing and Six Sigma projects focused on reducing waste, improving process capability, and increasing customer satisfaction., • Promote and enforce workplace safety policies and procedures. WHAT YOU’LL BRING • Bachelor’s degree from an accredited university in Engineering, Engineering Technology, or related field., • Minimum of 5 years of quality experience within a machining, manufacturing, repair, or industrial environment., • Minimum of 2 years of supervisory or leadership experience., • Knowledge of precision machining processes including CNC machining, manual machining, tooling, workholding, dimensional inspection, and manufacturing best practices., • Demonstrated experience leading root cause investigations and corrective action programs., • Strong working knowledge of ISO Quality Management Systems and audit processes., • Experience managing supplier quality programs and supplier performance improvement initiatives., • Strong understanding of quality tools, statistical analysis, process capability, and continuous improvement methodologies., • Proficiency in reading technical drawings., • Experience with ERP systems, quality databases, and manufacturing performance metrics., • Proficiency with Microsoft Office applications., • Strong leadership, communication, and organizational skills., • Lean Manufacturing certification or formal Lean training., • Experience with ISO 9001, AS9100, API Q1, or similar quality management systems., • Experience with Geometric Dimensioning and Tolerancing (GD&T)., • Experience using Coordinate Measuring Machines (CMM), precision inspection equipment, and Statistical Process Control (SPC)., • Ability to work throughout a manufacturing facility for extended periods., • Ability to occasionally lift up to 50 pounds., • Ability to safely navigate manufacturing equipment and inspection areas., • Ability to work in a manufacturing environment with varying temperatures and noise levels. ALSO GREAT IF YOU BRING/ PREFERENCES • Six Sigma Green Belt, Black Belt, or equivalent certification., • Certified Quality Engineer (CQE), Certified Quality Auditor (CQA), or similar professional certification., • Experience in turbomachinery, rotating equipment, and/or bearing and seal repair, is preferred., • Experience with custom engineered components in a fast-paced manufacturing environment. DOVER PRECISION COMPONENTS Dover Precision Components ‘DPC’ (‘the Company’) is part of Dover Corporation’s (‘the Parent Company’) Pumps and Process solutions segment. DPC holds market leading positions globally and delivers performance-critical solutions across the oil & gas, power generation, marine, industrial, chemical and general processing markets. We design and manufacture mission-critical equipment components to deliver more affordable, cleaner energy solutions and enable manufacturers to operate more efficiently. WE DELIVER CUSTOMER SUCCESS Dover Precision Components delivers products and services that enhance performance, improve safety, reduce carbon emissions, and accelerate clean energy adoption, through collaborative Customer relationships, expert engineering, and an innovative culture. Our strong Company portfolio is comprised of long products and services offered under Cook Compression, Cook Mechanical Field Services, Waukesha Bearings, Waukesha Magnetic Bearings, Inpro/Seal, Bearings Plus, and FW Murphy Production Controls. Our global footprint reaches more than twelve locations in the Americas and more than six locations in Europe and China. BUILDING POTENTIAL. SUSTAINING PERFORMANCE. BOOSTING FUTURES. We are diligent in recognizing our employees’ needs and providing an enriching experience through professional developmental opportunities. Our authentic, collaborative company culture, combined with a competitive suite of health and welfare offerings, emulates who we are. We consider several job-related, non-discriminatory factors when determining the pay rate for a position, including, but not limited to, the position’s responsibilities, a candidate’s work experience, a candidate’s education/training, the position’s location, and the key skills needed for the position. Pay is one of the Total Rewards that we provide to compensate and recognize employees for their work. Benefits for this position include: a 401(k) savings plan with employer contributions; medical, dental and vision insurance; wellness programs; health savings account, health care and dependent care flexible spending accounts; company paid short-term disability and long-term disability; company paid employee basic life and AD&D insurance; supplemental employee and dependent life insurance; optional accident, hospital indemnity and critical illness insurance; adoption, surrogacy, and fertility benefits and assistance; commuter benefits; parental, military, jury duty, and bereavement leaves of absence; paid time off, including business travel services; employee discounts; and an employee assistance program that includes company paid counseling sessions and legal services. Eligibility for benefits is governed by applicable plan documents and policies. All qualified applicants will receive consideration for employment without discrimination on the basis of race, color, religion, sex, sexual orientation, gender identity, national origin, protected veteran status, disability, age, genetic information, or any other factors prohibited by law. Attention Applicants: If you are an individual with a disability and require a reasonable accommodation to complete any part of the application process, please let us know. Likewise, if you are limited in the ability to access or use this online application process and need an alternative method for applying, we will determine an alternate way for you to apply. Please contact _ for assistance with an accommodation. Kindly specify Job Requisition Number / Job Title and Location in response. #LI-AS6

Job Description About the Company: Automation Solutions LP (AUTOSOL) is a Houston-based company with a focus on remote data communications software and hardware products. Our cutting-edge products and designs have provided over 30 years of continuous growth in the field of automation in the oil & gas, water/wastewater, manufacturing and aviation industries. Our main office is located in the Clear Lake area of Houston. We are currently seeking an experienced Accounts Receivable Clerk to join and assist our accounting team in the Houston office. Summary: This position requires a self-starter with excellent organizational skills, attention to detail, and the ability to multitask effectively. Responsibilities include accurately generating, inputting, and reviewing all customer invoicing. This includes software licenses, software support renewals, third-party purchasing, billable engineer time, lump-sum projects, and reimbursable expenses (including travel). This role reports directly to the accounting supervisor and CFO. Responsibilities: • Update and maintain customer accounts in the company’s CRM database (Salesforce) and accounting system (QuickBooks), • Process sales orders and customer PO’s, • Process time sheets and calculate billable time, • Purchase, manage, and invoice all billable costs, such as travel expenses, project-related expense reports, and third-party products, • Review, process, and ensure all billable expense reports are accurately completed and compliant with company policy, • Generate and process customer invoices for company products, third-party products, engineering time, lump-sum projects, and support renewals in accordance with company procedures and customer PO’s and/or contracts, • Monitor and maintain accurate records of customer contact information, sales tax status, support agreements, and invoicing / submission information, • Submit and process customer invoices in accordance with the customer’s submission requirements or preference in a timely manner, • Track lump-sum projects, job-related travel expenses, and time & materials, • Ensure completeness and accuracy of billing documentation, • Communicate effectively with customers regarding support renewals, billing inquiries, discrepancies, PO processing, tax status, and any other issues or queries as needed., • Perform weekly A/R calls, • Collaborate with other departments, including sales and engineering, to streamline billing processes and address any discrepancies., • Receive and process shipments, • Answer phone calls as backup to the receptionist Qualifications: • Bachelor’s Degree required, • 2-3 years’ experience in accounting or related field, • 1-2 years’ experience in invoicing and/or accounts receivable, • 1-2 years’ experience using financial / accounting software (QuickBooks is preferred), • Proficient in excel, • Familiarity with bookkeeping and basic accounting principles / procedures, • Experience invoicing in software and / or engineering industry is a plus., • Excellent attention to detail, time management, and organizational skills, • Initiative driven with openness to training and learning, • Problem-solving and solution oriented, • Strong written and oral communication skills This is a full-time position with a full benefits package. Salary commensurate with experience and qualifications. Benefits: • Health, Dental, and Vision Insurance, • Life Insurance, • Profit Sharing (after one year of employment), • 401K (after one year of employment), • Paid time off To be considered for this position you must submit all the following: resume, list of three to four professional references, and salary requirements. Company DescriptionAUTOSOL is a Houston-based company with a focus on remote data communications software and hardware products. Our cutting edge products and designs have provided for 30 years of continuous growth in the field of Automation in the oil & gas, water/wastewater, manufacturing and aviation industries. We are located in the Clear Lake area of Houston. We provide a structured hands-on agile environment while promoting an independent kind of creativity. We provide highly competitive salaries, comprehensive health plans, matching 401K, and profit sharing, in addition to many other benefits. In compliance with federal law, all persons hired will be required to verify identity and eligibility to work in the United States and to complete the required employment eligibility verification form upon hire.AUTOSOL is a Houston-based company with a focus on remote data communications software and hardware products. Our cutting edge products and designs have provided for 30 years of continuous growth in the field of Automation in the oil & gas, water/wastewater, manufacturing and aviation industries. We are located in the Clear Lake area of Houston.\r\n\r\nWe provide a structured hands-on agile environment while promoting an independent kind of creativity. We provide highly competitive salaries, comprehensive health plans, matching 401K, and profit sharing, in addition to many other benefits. In compliance with federal law, all persons hired will be required to verify identity and eligibility to work in the United States and to complete the required employment eligibility verification form upon hire.

Job Description The IBM iSeries Systems Engineer is responsible for supporting and administering various iSeries processes, servers, and interfaces with other platforms such as Linux, Windows, Oracle, Python, MS SQL, MEMSQL, etc.. The Solutions Engineer will support web applications in the areas of Apache, HTTP, and (PHP) administration as well as support and upgrades of all 3rd party applications. The Solutions Engineer is also responsible for implementation planning for Users, Applications, and other System Users. Responsibilities and Duties: This individual must possess a high degree of technical knowledge regarding iSeries processing, change management, software development, and associated technology tools. Programming and systems skills in CLP, RPG ILE, SQL, Power HA replication, IBM Operations Navigator, PHP, BCD Products (Nexus Portal, Presto, Websmart), Aldon/ARCAD, FTP, Windows, and Microsoft Office products are required. The Solutions Engineer may be assigned the lead role of a temporary sub-team which is focused on a specific system project. This individual must know and work toward the relevant IT policies & procedures as well as the organizational vision that includes application system support that occurs at the enterprise level. The Solutions Engineer will work with IS and business management to implement system changes within the required accounting windows set by Accounting and follow SOX controls. The Solutions Engineer is to be an effective resource manager in terms of personnel, hardware, software, and budget that pertain for system processing and software applications and projects including 3rd party applications. These skills also include competent estimating tasks and projects which can be expressed in terms of hours and timelines with expressed due dates. · Provide system enhancements, modifications, performance tuning, training, and support services for assigned system projects. · Work with IS technical resources to provide high availability monitoring and maintenance for assigned applications. · Interact with users in various departments to prepare specifications for new application and system enhancements, modifications, and support issues. Also, prepare training materials and application documentation. · Organize a technical project in its entirety and articulate the project as a logical sequence of executable tasks. · Prepare formal project plans as needed, illustrating tasks, task sequence, task dependencies, estimated effort per task, due dates, and responsible parties. · Identify a projects Critical Path and note associated risk points. · Understand the overall system, programming, and data integration strategy in both its current state, as well as planned future state. · Develop and supervise the proper execution of test plans for assigned projects, and coordinate end-user participation and sign-off. Provide SOX documentation as required. · Know, practice and enforce the relevant IT policies and procedures. · Maintain an awareness and an updated status of projects that fall within a span of responsibility. · Work closely with IT management to ensure project approaches, auditing, processes, and adhere to system standards. · Develop and maintain a close relationship with the IT technical staff members to properly utilize personnel in delivering information systems that support business requirements. · Monitor and control the integrity of the system, programming, data standards, and system/application interfaces. · Conduct periodic follow-up calls with clients that permit communication opportunities to attain feedback. Act on that feedback. Qualifications: · Must have 5-10 years’ experience in Information Systems. · iSeries experience required. · Bachelor’s degree required. Bachelor’s degree in Management Information Systems or Computer Science preferred. · Specific skills. · Required to be on-call during work and off-hours as necessary. · May travel when necessary for system implementation and training

Job Description Hunton Services, a division of the Hunton Group, is seeking to hire an Energy Project Developer / Engineer who would serve as the primary technical resource to the Business Development and Project Delivery teams. Responsible for identifying and understanding the mechanical, electrical, utility, and energy-related equipment and systems within a prospective customer's facility. Responsible for developing comprehensive and cost-effective technical solutions that increase the operational efficiency and/or effectiveness of the facility. Provides ongoing technical consultation and design of Energy Conservation Measures (ECMs) to facilitate the sales/business development process, ensure smooth installations, and achieve identified energy savings for the customer. This candidate should have a strong "airside" background and be interested in data analysis. Come work for an Industry Leader that has been recognized both locally and nationally as a Top Place to Work! Key Responsibilities: • Perform HVAC and building performance calculations to support system design and project planning., • Stay current with emerging technologies, industry best practices, and code updates., • Identify and apply appropriate software modeling tools to enhance project accuracy and efficiency., • Leverage cloud-based platforms such as Microsoft Teams and SharePoint for team collaboration and document management., • Travel locally throughout Southeast Texas to visit project sites, attend meetings, and coordinate with teams., • Participate in occasional overnight travel based on project needs. Qualifications: • Bachelor's degree in Engineering (Mechanical, Architectural, or related discipline preferred)., • 1-3 years of experience in MEP engineering or HVAC design/build environments., • Engineer-in-Training (EIT) certification required, with a clear plan to pursue Professional Engineer (PE) licensure upon meeting eligibility requirements., • Solid understanding of HVAC fundamentals, including psychrometrics, load calculations, equipment selection, and system design., • Familiarity with commercial HVAC equipment types and their applications., • Working knowledge of local and state energy codes, building standards, and relevant industry regulations., • Strong written and verbal communication skills., • Ability to manage multiple tasks, collaborate effectively with team members, and maintain a positive, solution-oriented mindset., • Must have a clean driving record and access to a reliable personal vehicle for travel as needed. Job Posted by ApplicantPro

Job DescriptionPurpose of the position The Product Quality Engineer is a professional who understands the principles of product and service quality evaluation and control. This body of knowledge and applied technologies include, but are not limited to, development and operation of quality control systems, application and analysis of testing and inspection procedures, the ability to use statistical methods to diagnose and correct improper quality control practices, an understanding of human factors and motivation, facility with quality cost concepts and techniques, and the knowledge and ability to develop and administer management information systems and to audit quality systems for deficiency identification and correction. This position will be responsible for the implementation, use, compliance and maintenance of quality systems and tools including the Quality Management System. Duties and Responsibilities： • Define the product quality control plan and audit the implement status of quality control plan., • Works with cross-functional teams to prioritize key site projects and determine appropriate resources and timing; integrate activities using quality principles such as lean Six Sigma with Quality Management System activities such as Corrective and Preventive Action (CAPA) and Quality Improvements to assure effectiveness and compliance to customer and regulatory requirements., • Evaluates performance of current operational Quality and Quality Engineering methods (e.g., failure analysis, measurement systems analysis, process development, etc.) and drives best practices throughout the business and transfers that knowledge across the business, as appropriate., • Reports significant issues or developments identified during Quality activities and provides recommended process improvements to management., • Becomes proficient in the various business systems used at First Quality, including MES, quality data collection systems and understands how the systems are integrated with each other and within the business Education and work experience • Bachelor’s degree in Engineering discipline or a technical field with 2 years of quality or electrical manufacturing experience required., • Three or more years in quality or manufacturing engineering strongly preferred., • Highly qualified candidates would have an advanced degree in Analytics and/or ASQ CQA or CQE certification, and/or Lean or Six Sigma certification, • Experience in technical problem solving, statistical analysis, and quality auditing preferred. Working conditions • Office-based role, fast-paced work environment Skills: • Having 2 years working experience of product/process analysis and handling customer complaint for electronic product., • Familiar with applying quality control tools to analyze and complete quality problem report., • Good quality awareness and interpersonal communication skills., • Strong knowledge of MS-Office products and proficiency in Mini Tab, • Strong communication and coordination skills. Powered by JazzHR TGbK7qPPsi

Job Description COMPANY OVERVIEW Hanwha Energy USA, headquartered in Houston, Texas, is part of the Hanwha Group—a FORTUNE Global 300 company and one of South Korea's most respected business enterprises. With over a decade of experience delivering high-quality, utility-scale energy projects across North America, Hanwha Energy USA has evolved into a comprehensive energy solutions provider. Our portfolio now spans utility-scale renewables, natural gas generation, retail electricity, and strategic partnerships that power America's growing data center industry. Our expertise covers the entire energy value chain—from project development and engineering to construction, operations, and maintenance. By integrating advanced technologies, proven processes, and strong partnerships, we deliver reliable, customized solutions that meet the dynamic needs of local energy markets. Hanwha Energy USA is actively advancing strategic initiatives in natural gas generation and data center development, including hyperscaler solutions on both sides of the meter. We are proud to serve as the parent company of: • Hanwha Renewables – specializing in utility-scale solar and battery energy storage systems (BESS), • Chariot Energy – providing retail electricity services for residential, commercial, and industrial customers in deregulated markets POSITION OVERVIEW The Project Development Engineer plays a central role in evaluating, planning, and advancing natural gas–fired power generation projects from concept through financial close. This position blends technical engineering expertise with commercial analysis, regulatory awareness, and cross‑functional coordination to bring utility‑scale power projects to life. The employee may be required to perform other job-related duties as requested by management. All duties will be assigned in accordance with applicable laws and company policies. RESPONSIBILITIES Project Development & Engineering • Support technical development of natural gas power plant projects, including engines, simple‑cycle, combined‑cycle, and cogeneration facilities., • Conduct feasibility studies, preliminary engineering, and technology selection (turbines, HRSGs, emissions controls, balance‑of‑plant systems)., • Develop conceptual designs, site layouts, and equipment specifications., • Evaluate interconnection requirements and coordinate with transmission system operators., • Support environmental permitting by providing technical inputs for air, water, and noise analyses. Commercial & Financial Support • Prepare capital cost estimates, O&M cost assumptions, and performance models., • Support financial modeling by providing heat rate, output, degradation, and availability assumptions., • Participate in due diligence for project acquisitions or partnerships., • Assist in preparing proposals, RFP responses, and investment memoranda. Project Management & Coordination • Coordinate with EPC contractors, OEMs, engineering consultants, and permitting agencies., • Manage schedules, deliverables, and risk assessments during early‑stage development., • Facilitate cross‑functional collaboration with strategy, environmental, commercial, and finance teams., • Track project milestones and ensure alignment with corporate development strategy. Regulatory & Permitting • Support preparation of permit applications (air permits, water use, land use, FERC/ISO filings)., • Monitor regulatory changes affecting natural gas generation, emissions standards, and grid interconnection., • Engage with local authorities, community stakeholders, and utility partners as needed. Technical Analysis & Optimization • Analyze plant performance, fuel supply options, emissions control strategies, and grid integration., • Evaluate emerging technologies such as hydrogen‑ready turbines, carbon capture, and energy storage hybrids., • Recommend design improvements to enhance efficiency, reliability, and environmental performance. REQUIRED QUALIFICATIONS Education & Experience • Bachelor's degree in Mechanical, Electrical, Chemical, or Energy Engineering., • 3–7+ years of experience in power generation, natural gas turbines, EPC, or energy project development., • Experience with combined‑cycle or simple‑cycle gas turbine projects strongly preferred. Technical Skills • Familiarity with gas turbine technologies (GE, Siemens, Mitsubishi, etc.)., • Understanding of thermodynamics, heat balance modeling, and plant performance analysis., • Knowledge of environmental permitting processes and grid interconnection requirements., • Proficiency with engineering tools (e.g., GT Pro/GT Master, AutoCAD) is a plus. Soft Skills • Strong analytical and problem‑solving abilities., • Excellent communication and stakeholder‑management skills., • Ability to work independently and manage multiple development tracks simultaneously., • Strategic mindset with attention to detail. COMPENSATION: $110,000 - $135,000 salary Attention external recruitment firms, we will not accept any unsolicited resumes at this time. Please do not contact any internal member of our company to discuss the position or to solicit candidates. Hanwha Energy USA provides equal employment opportunities (EEO) to all employees and applicants for employment without regard to race, color, religion, sex, national origin, age, disability or genetics. www.174powerglobal.com.

Job Description Role Overview: The Field Electrical Engineer will provide dedicated on?site electrical construction support for the SSE Station 165 project. The role is focused on execution?phase support, interface management, and electrical system readiness for a large compressor station with constrained utility power and interim power bridge / on?site generation solutions. This position is not a design role. It is a field?execution and integration role requiring strong construction experience, practical NEC knowledge, and the ability to resolve electrical issues in real time in a construction environment. Key Responsibilities: 1. Electrical Construction Support (Primary Function) • Act as the owner's on?site electrical representative supporting the Construction Manager, inspectors, and project team., • Provide daily field oversight to ensure electrical installation activities align with:, • IFC drawings, • Approved one?lines and schematics, • Vendor documentation, • Project electrical standards and NEC requirements, • Verify electrical installations in the field, including routing, clearances, access, grounding, bonding, and equipment placement., • Identify constructability issues early and coordinate resolution before they become rework or schedule risks., • Support electrical scope in compressor buildings, E?houses, switchgear, MCCs, grounding systems, lighting, and auxiliary systems. 1. RFI and Field Issue Management: • Serve as the primary on?site focal point for electrical RFIs, field questions, and technical clarifications., • Ensure contractors do not deviate from electrical drawings or specifications without following the formal RFI process., • Collect and provide field data (photos, dimensions, conditions) needed for engineering resolution., • Track RFIs, responses, and implementation status to closure., • Escalate issues that present safety, code, cost, or schedule risk. 1. EMD Electrical Integration Support: • Support field installation and integration of EMD?related electrical scope, including:, • Cable tray routing and support, • Power and control cable terminations, • Interface coordination between EMD equipment and station electrical systems, • Verify electrical interfaces do not obstruct equipment access, maintenance paths, or operational walkways., • Coordinate with vendors, inspectors, and construction teams to ensure correct installation and sequencing. 1. On?Site Power Generation and Power Bridge Support: • Provide field support for temporary or interim power bridge / on?site generation systems required due to limited utility availability., • Support the installation, tie?in, grounding, and integration of on?site generators and associated electrical infrastructure., • Verify interfaces between generators, switchgear, protection systems, and station distribution are installed per design and NEC., • Assist with readiness for power transitions, testing, and staged energization activities., • Coordinate with power systems engineers as needed to ensure field execution aligns with the approved power strategy. 1. NEC Compliance and Electrical Safety: • Maintain a working, field?applicable knowledge of the National Electrical Code (NEC)., • Verify NEC compliance for:, • Grounding and bonding systems, • Equipment labeling and clearances, • Conductor sizing and installation methods, • Temporary power and generator connections, • Surge protection and protection coordination where applicable, • Identify and correct non?compliant installations before energization., • Support a strong electrical safety culture on site. 1. Documentation, Redlines, and Turnover Support: • Maintain accurate electrical redlines/as?builts based on field conditions., • Ensure redlines are routinely transferred to engineering/document control for incorporation into record drawings., • Support development and completion of:, • Electrical job books, • As?built documentation, • Test and inspection records, • Construction punch lists, • Assist with compiling electrical documentation required for commissioning and turnover. 1. Schedule, Progress, and Change Awareness: • Support the Construction Manager by identifying electrical constraints that may impact schedule., • Provide field input for evaluation of electrical change orders and scope changes., • Assist with coordination of equipment deliveries and installation readiness for major electrical components., • Identify opportunities to reduce delays and avoid rework through early issue identification. 1. Cross?Functional Coordination: • Coordinate daily with construction management, inspectors, and discipline leads., • Interface with engineering, vendors, and third?party contractors to resolve electrical field issues., • Support alignment between base station electrical scope and power bridge scope to ensure seamless integration. Required Qualifications: • Bachelor's degree in electrical engineering and hands?on electrical construction experience., • Strong electrical construction support experience in industrial or energy facilities., • Demonstrated experience supporting EMD or large rotating equipment electrical installations., • Demonstrated experience with on?site power generation or temporary power systems., • Working knowledge of NEC, with the ability to apply code requirements practically in the field., • Experience managing RFIs, redlines, punch lists, and turnover documentation., • Ability to work full?time on a construction site and communicate effectively with contractors and project leadership. Preferred Qualifications: • Previous experience on compressor station or similar large industrial infrastructure projects., • Experience with power systems interfaces involving generators, switchgear, MCCs, and protection systems., • Experience supporting late?stage design changes and accelerated construction schedules., • Prior experience acting as an owner's field representative. Performance Expectations: • Electrical installations are executed safely, correctly, and in compliance with NEC and project requirements., • Field electrical issues are identified early and resolved efficiently., • RFIs, redlines, and turnover documentation are accurate and complete., • Power bridge and on?site generation systems are installed and integrated without introducing commissioning risk.

Job Description Join UCT and be part of the fastest-growing sector in the world! We indirectly touch every semiconductor chip that goes into every smartphone, smart car, and device that uses artificial intelligence. This is a critical time for the semiconductor industry and for UCT - as technology evolves, we evolve with it. UCT is a diverse workplace where every talented employee is committed to continuous innovation, challenging the status quo and exceeding customer expectations. If you are a person with a relentless drive to succeed, a strong focus on quality with a passion for success – join us today! UCT is looking for a talented Engineering Tech II to join us in Missouri City, TX! The Engineering Tech II is responsible for developing and optimizing manufacturing documentation and processes to support efficient and compliant assembly operations. The position collaborates closely with engineering teams to translate technical concepts into clear, actionable work instructions, training materials, and design documentation. The incumbent ensures adherence to Good Manufacturing Practices (GMP), supports prototype development, and contributes to continuous improvement initiatives across product design and manufacturing. Essential Duties and Responsibilities: • Develop and maintain Work Instructions and Operational Method Sheets (OMS) using text, images, and drawings to guide assembly technicians., • Create and streamline manufacturing documentation, including training materials, to support efficient production workflows., • Implement GMP standards within assembly processes and ensure documentation reflects compliance requirements., • Participate in engineering design reviews, providing constructive feedback and technical input., • Support engineering activities including design, testing, diagnostics, and prototype modifications., • Interpret schematics, block diagrams, and verbal instructions to perform testing and troubleshooting., • Generate accurate assembly drawings and Bills of Material (BOM) using SolidWorks and Pro-Engineer., • Develop CAD models and detailed part drawings from sketches, layouts, and design specifications., • Apply principles of design for manufacturability, cost-efficiency, and testability., • Conduct testing using engineering methodologies such as design of experiments and data analysis., • Perform hands-on electro-mechanical assembly and support NPI (New Product Introduction) efforts., • Execute tasks in controlled or cleanroom environments as required., • Perform other duties as assigned to support engineering and manufacturing objectives. Other Duties Please note this job description is not designed to cover or contain a comprehensive listing of activities, duties or responsibilities that are required of the employee for this job. Duties, responsibilities and activities may change at any time with or without notice. Knowledge, Skills and Abilities: • Proficiency in SolidWorks and Pro-Engineer for component and system design., • Basic understanding of mechanical design principles, drawing standards, and GD&T., • Experience with electro-mechanical assembly and prototype manufacturing., • Ability to work from technical documentation and verbal instructions., • Familiarity with NPT and compression fitting installation and testing., • Strong attention to detail and commitment to quality and accuracy., • Effective communication skills and ability to collaborate across teams., • Ability to work in cleanroom or controlled environments., • Experience developing manufacturing documentation and training materials., • Knowledge of GMP and its application in manufacturing environments., • Demonstrated initiative and ownership in task execution., • Experience supporting design for manufacturability and cost optimization., • Prior involvement in design reviews and engineering collaboration. Educational/Certification Requirement: • High School Diploma or equivalent required; actively pursuing college courses for an engineering degree is given high consideration. Experience Requirement: Work Experience: • 2-4 years of electro-mechanical technician experience within a manufacturing environment required. Ultra Clean Technology is proud to be an equal-opportunity employer. We are committed to equal employment opportunity regardless of race, color, national or ethnic origin, age, religion, disability, sexual orientation, gender, gender identity and expression, marital status, and any other characteristic protected under laws and regulations.

Job Description About Sungrow: Sungrow Power Supply Co., Ltd. (Stock code: 300274) is a globally recognized renewable energy company, specializing in R&D, manufacturing, and services for solar, wind, energy storage, hydrogen, and electric vehicle solutions. Established in 1997, Sungrow is known for its innovative photovoltaic inverters, wind converters, EV chargers, energy storage systems, and hydrogen production technologies. Its products are sold in over 180 countries, with a cumulative installed capacity exceeding 740 GW by the end of 2024. Sungrow has contributed to national standards and holds numerous core technologies. With multiple industry awards and advanced R&D centers, it ranks among the global leaders in clean energy. Guided by its mission “Clean power for all,” Sungrow continues to drive innovation and global sustainability. The Position: As a Medium Voltage Transformer (MVT) Engineer with the Sungrow Service Department, you will responsible for applying knowledge and theory of Electrical Engineering, Magnetics, and Power systems. In addition you will be completing internal and customer specific reviews. This will include design reviews, equipment diagnostics, troubleshooting mechanical and electrical faults, and root cause analysis (RCA) reports. Essential Duties and Responsibilities: • Investigate, troubleshoot, and analyze transformers and it’s components in the field., • Utilize IEEE, NETA, NEC, and UL standards for testing and safety procedures., • Consult manuals, schematics, wiring diagrams and engineering personnel to troubleshoot and solve equipment problems and determine optimum equipment functioning., • Prepare and maintain reports detailing all tests, repairs, and maintenance performed., • Coordinate with HQ and OEMs to investigate design issues and use Lean Six Sigma techniques for design improvements and Root Cause Analysis (RCA) reports., • Provide on-job training to other team members., • Maintain strong client relationships., • Demonstrate safe work practices and avoid unsafe behaviors., • Must be able to work independently and in a team environment., • Train Field Service employees on processes and procedures. Minimum Requirements and Competencies: • Bachelor’s degree in Electrical Engineering from accredited University or College., • Solar/Battery Energy Storage industry experience is preferred., • Minimum 3 years overall experience working with liquid filled and/or dry-type transformers., • Experience performing Power Factor, Insulation Resistance, and Dissolved Gas Analysis testing., • Understanding of prioritizing work based upon urgency., • Ability to thrive in a fast-paced and challenging environments., • Technical problem solving/analytical skills., • Self-starter, strong initiatives and an excellent communicator., • System and product level mindset., • Organization, detailed-oriented nature and strong initiative., • Strong technical support focus and a service-oriented mindset both with the Sales team and customers . Travel: • 50% Work Location and Status: • Full time, Remote Position. USA, • No visa sponsorship Compensation: • Compensation commensurate with experience, • Competitive benefits package and employee programs, • Strong personal and company growth opportunities For candidates in the states of California, Colorado, New York and Washington, the anticipated annual base salary for this role is between $80,000 - $120,000 This range does not include any other compensation components or other benefits that an individual may be eligible for. The base salary offered is dependent upon several factors, including but not limited to job-related skills, qualifications, experience, education, location, or other factors related to the role. Sungrow is an equal opportunity employer. Due to strong interests in this position, Sungrow will only reach out to those candidates who best meet the requirements. Thank you for your interest in Sungrow. #LI-LV1

Job Description Make an Impact With Us At Vallourec, we are seeking individuals whose passion and dedication match the strength and resilience of the steel we produce. The Operational Excellence (OpEx) Engineer will be a highly qualified continuous improvement professional with deep experience in achieving transformative results and working within a management system environment. The role is tasked with the facilitation and deployment of the DRIVE+ (OpEx Management System). Primary focus is on the definition of the region strategy regarding the deployment of corporate initiatives related to lean management and maturing the DRIVE+ Management System. The position will provide leadership to assist operating and maintenance leaders in identification, prioritization and implementation of projects, routines and system elements that improve key business indicators. They will provide expertise and support in monitoring, facilitating, leading and training all team members to work effectively within the system, including but not limited to methods such as 5S, TPM, standardization, workflow analysis, value stream mapping, maintenance excellence and Six Sigma. The OpEx Engineer will track overall improvement progress and report as necessary to local up through executive management. Your Role at a Glance • Develop, continuously improve and own assigned elements of the DRIVE+ Management system and ensure compliance and governance to the requirements are followed through deep training, follow-up and auditing., • Work within assigned area of operation to identify, prioritize and execute projects that improve their key performance indicators. Lead and/or facilitate continuous improvement efforts associated with safety, quality, operational excellence, cost and people., • Help units to identify key performance indicators and develop tools to improve them (flow complexity, purchasing methods, and value analysis of process). Ensure through audits that tools are appropriately and effectively used. Use deep statistical analysis to draw conclusions., • Work with financial teams across the business to validate project justification and success to support the business case(s)., • Develop and maintain detailed process / value stream maps and metrics for the key manufacturing and business processes., • Drive daily management methods – implement improvement methods into the daily, weekly and monthly operational meeting routines (GTM, FST, SMT levels of MDI)., • Supports other CI professionals (works as a team) in the facility to deploy the appropriate Safety, Quality, Flow, Cost, People metrics and management routines at all levels of the organization within the context of the DRIVE+ system., • Ensures sustainability of improvement results. Ensures the appropriate performance indicators are in place for projects and that teams have been provided with adequate knowledge to achieve and maintain those improvements (coaching)., • Coach, mentor and develop site resources to work within and understand their personal connection to the DRIVE+ Management System., • Coordinate and report status of improvement and cost saving efforts/results and report to executive leadership and corporate as needed., • Assist leadership in the planning, development, coordination, support, and execution of strategic planning process, and take ownership of high impact (immediate and long term) improvement projects., • Instill a Problem Solving and Continuous Improvement culture across sites and in related areas of the organization., • Coordinate the content of all Lean training materials and lead the implementation of a structured training program for improvement teams. Lead the development and implementation of all levels of the hourly Skill Based Development program as it relates to Lean and Six Sigma methods. Coordinate North America Six Sigma program and act as expert/coach for project leaders. Lead Six Sigma projects as needed., • Support cross-site and cross-functional efforts to improve shared business processes – both transactional and operational and lead the effort to streamline processes across all sites., • Lead benchmarking and the exchange of knowledge and best practices in relation to lean and Six Sigma methodologies with Vallourec Group steering committees and other entities., • Follow all company policies, practices and regulations to include Safety and Quality., • Any other duties as assigned. What Sets You Apart We’re looking for individuals who bring the right mix of experience, mindset, and motivation: • Bachelor’s degree in Engineering (preferred mechanical, electrical, automation). Business related degrees will be considered., • 5 years in Continuous Improvement or Lean Manufacturing within an industrial setting., • Strong background in engineering or operations leadership with a solid understanding of process flow, waste identification, and lean manufacturing principles., • Demonstrated experience implementing Six Sigma or Toyota Production System (TPS) methodologies., • Prior roles with direct responsibilities on the shop floor at some point in career., • Experience in operations leadership or process engineering within the industrial sector, with a strong grasp of broader business strategy., • Proven ability to facilitate and motivate continuous improvement initiatives across cross‑functional teams., • Strong organizational skills with a high level of attention to detail and the ability to manage and execute complex instructions., • Ability to manage multiple complex projects and communicate progress clearly and concisely., • Effective interpersonal skills with the drive to work closely with shop floor personnel and build strong communication channels., • Proficiency in Microsoft Office Suite, including Word, Excel, PowerPoint, and Visio., • Ability to travel locally and periodically for long‑distance assignments. What Powers Your Performance Success in this role is driven by a strong mix of personal ownership, collaboration, and continuous improvement. We value team members who: • Communicate clearly and constructively, • Collaborate effectively and contribute to team success, • Adapt to change with a positive, proactive mindset, • Take accountability and show initiative in their work, • Demonstrate reliability and pride in performance, • Prioritize safety and act with awareness, • Embrace feedback and use it to grow, • Maintain high attention to detail, • Drive continuous improvement and challenge the status quo, • Support and develop others through shared learning How We Support Your Success We’re committed to helping you thrive- on the job and beyond. That’s why we offer a collaborative culture where your ideas drive real change, and career mobility within a stable, essential industry. To support your growth and well-being, we also provide a comprehensive and competitive benefits program, including: • Medical, Dental, and Vision Coverage, • Company-Paid Life Insurance & Short/Long-Term Disability, • Profit Sharing: Up to 4%, • 401(k): Company match 4.5% with no vesting period, • Paid Parental Leave: For birthing and non-birthing parents, including adoptions, • Paid Holidays: 10 days, plus 1 personal floating holiday, • Paid Vacation Time, • Discretionary Performance-Based Bonus Program, • Tuition Reimbursement Safety isn’t negotiable, it’s who we are. Every spark, every shift, and every decision is guided by a commitment that goes well beyond compliance. We don’t cut corners; we set the standard. That means clear expectations, continuous training, and shared accountability at every level. Protecting our people is more than a priority, it’s a promise we make to every colleague, every day.

Job Description Job Summary The Project Engineer is responsible for planning, developing and managing the engineering activities for projects. This person in addition they are responsible for compliance of specification, scheduling, and cost control of the project based on the sales release. This position is currently a contractor role, but has the potential to be a full-time role in 2026. JOB DUTIES/Responsibilities • Attend Client kick-off and internal kick-off meeting (If applicable), • Manage project engineering and related personnel functions and activities., • Ensure project engineering activities comply with company and contract requirements and support the overall schedule., • Develop, implement and administer project engineering procedures and other work controlling documents., • Interface with all departments as required to resolve problems, ensure quality of efforts in support of the overall project schedule., • Assist in the establishment of the overall schedule, • Review scope of supply with his supervisor., • Acknowledge Purchase Order as authorized by his supervisor, • Acknowledge Change Order as authorized by his supervisor, • Prepare requisitions and coordinate with the Purchasing Department., • Issue drawings/documents as directed by his supervisor, • Resolve technical issues with engineers as guided by his supervisor., • Assist in controlling project cost and change orders, • Prepare Inspection & Test Plans as directed, • Conduct site and shop visits as directed, • Monitor material, documents, fabrication and erection status and report to his supervisorEducation, • Bachelor’s degree in engineering or related field,, • Professional certification preferredWork Experience, • 5 years’ technical experience required, • 7 Years of technical experience in a related position in lieu of a bachelor's in engineering Required SKILLS/ABILITIES:, • Excellent verbal and written communication skills., • Excellent interpersonal and customer service skills., • Proficient in Microsoft Office Suite or related software., • Excellent organizational skills and attention to detail., • Apply innovative and effective engineering techniquesQHSE REQUIREMENTS Quality: • Take responsibility for the sustainability of Axens and ensuring quality performance, • Report any and all quality related issues or non-conformities to your manager, • Maintain awareness, proactively participate and support all Axens policies for quality management, • Assist in the continual improvement of an effective Integrated Management System complying with the requirements of ISO 9001:2015, • Assist in achieving Site, Department, Regional and Global Quality Management Program goals and objectives. Health and Safety: • Take responsibility for the health and safety of self and others, • Report any and all health and safety incidents to your manager, • Maintain awareness, proactively participate and support all Axens policies and objectives regarding health and safety, • Assist in the continual improvement of an effective Integrated Management System complying with the requirements of ISO 45001:2018, • Assist in achieving Site, Departmental, Regional and Global Health and Safety goals and objectives Environmental: • Take responsibility for the sustainability of Axens and protecting the environment, • Report any and all environmental concerns or incidents to your manager, • Maintain awareness, proactively participate and support all Axens policies regarding environmental protection, • Assist in the continual improvement of an effective Integrated Management System complying with the requirements of ISO 14001:2015, • Assist in achieving Site, Departmental, Regional and Global Environmental Management Program goals and objectives

Job Description Position Overview The Mechanical Engineer II will apply their professional and technical expertise to designing mechanical engineering concepts and options that align with the owner’s vision for each project. This individual should have a solid understanding of the consulting engineering process and the contractual documents which are involved. Responsibilities Determine the scope of assigned projects and utilize software programs to create the mechanical engineering designs including HVAC, plumbing, and fire protection, or other mechanical systems Determine cost-effective system layouts, quantities/sizes, and specifications, and verify code compliance of the system designs Preparation and layout of BIM drawings and coordination with all other disciplines at all phases of project production, including schematic design phase, design development phase, permitting phase, and construction documents phase Perform construction administration tasks including, but not limited to, site observations, shop drawing review, and preparation of punch lists Define appropriate project scope and ensure it is accurately reflected in the contract documents; proactively manage any possible scope of work variances to ensure client satisfaction and that projects stay on track Maintain excellent business relationships and communication with clients, partners, architects, owners, other design and construction professionals, and various code officials regarding the overall engineering project, associated assignments, and action items Support with mentoring more inexperienced mechanical designers Miscellaneous duties, as assigned Qualifications Candidates must be authorized to work in the United States and based in Houston, TX Bachelor’s Degree in Mechanical Engineering At least 5 years of experience in mechanical engineering design of commercial buildings preferably in aviation, higher education, health care, hospitality, entertainment, or governmental facilities Licensed Professional Engineer (PE), or Engineer in Training (EIT), preferred At least 2 years of experience coordinating with multi-discipline engineering teams Experience with a variety of project deliverable methods including design-build, design-bid-construct, fast-track and other construction delivery methods Knowledge of local, state, and national codes, including other aspects of laws, regulations, and potential liabilities affecting the practice of engineering Revit MEP proficiency required, and familiarity with other engineering software programs Highly proficient technical/computer skills including Microsoft O365 (Outlook, Work, Excel), internet and web applications Excellent communication, interpersonal, and presentation skills; ability to clearly convey information, ideas, and concepts verbally, written, or in graphic form Ability to prepare original specifications for project systems and components, as well as complete project manuals with sub-consultant specifications Must have the technical knowledge and hands-on experience to effectively evaluate various mechanical engineering options for configuration of equipment and components Experience with cost containment and reduction approaches Skills & Competencies Uses resources efficiently, strives to reduce cost Strong conflict management abilities — a good listener, committed to finding solution to problems, works to address difficulties Comfortable maintaining professional relationships with clients, vendors, code officials, etc. Works well with internal and external teams, promotes a positive image of the company, strives to solve issues raised by customers Meets deadlines, works independently or as part of a team, accountable, maintains focus on set objectives and goals Excellent attention to detail and thoroughness in deliverables and communications, maintains high-quality standards, and good follow-up skills Ethical, honest, and accountable; maintains confidentiality, handles sensitive information with discretion and professionalism Has a bias for action and seeks new opportunities for continual improvement Keeps information organized and accessible, maintains efficient workspace, manages time well Monitors status of projects, thoroughly deals with project details, holds project owners accountable, delivers clear, accurate depiction of status Looks for opportunities to increase knowledge, works to increase responsibility, strives to achieve personal goals Ability to work effectively in a group or team environment as well as independently; values input and opinions of others Physical Requirements Must have the ability to perform the necessary job-related functions with or without reasonable accommodation. Travel up to 10–35% for site investigations and assessments, or client meetings Remain in a stationary position, often standing or sitting, for prolonged periods Work extended hours, evenings and weekends when necessary to meet business deadlines Regular use of office equipment such as a computer/laptop and computer screens Dexterity of hands and fingers to operate a computer keyboard, mouse and other computer components Ability to see differences between colors, shades and brightness Depth perception (three-dimensional vision, ability to judge distances and spatial relationships) May occasionally be exposed to the following work conditions: work near/with moving mechanical parts; work near/with electrical currents; work in high places or underground; be exposed to fumes/airborne particles or caustic chemicals; withstand outdoor weather conditions; withstand moderate to very loud noises Benefits & Perks Competitive compensation and benefits package Flexible hybrid work options Flexible Time Off Generous paid holiday schedule Paid Parental Leave 401k plan with company match Employee perks and discounts Professional development assistance Opportunity to work on impactful, headline-making projects that positively impact local and national communities

Job DescriptionDescription: We are ERock! ERock is a leader and innovator of Electrical Resiliency-As-A-Service. Our advanced dual-purpose microgrids protect companies, critical infrastructure, and communities from unexpected power outages, ensuring business continuity and civic durability. ERock’s dual-purpose microgrids use natural gas and renewable natural gas (RNG) to drive the nation’s most dependable microgrids — all while producing significantly lower to zero carbon emissions than traditional diesel backup generators. Powered by GraniteEcosystem™, our revolutionary software system, ERock solutions provide 24/7/365 monitoring, optimization, and forecasts to enable worry-free, reliable power for businesses. The ERock solution brings together patented technologies, advanced dual-purpose microgrid designs and integrated end-to-end services. The Power is On and we keep it on. What you’ll do… We are looking to hire a detailed-oriented, driven, and resourceful Electrical Designer for multiple Microgrid Engineering Procurement Construction (EPC) projects. The successful candidate will perform project and electrical design work. You will prepare project design packages typically comprising one lines, layouts, MTOs, installation details etc. under the supervision of a Senior/Lead Engineer. Mechanical / construction design experience is a plus. This position will report to the Director of Microgrid Engineering and will work a hybrid schedule based out of our headquarters in downtown Houston, TX. Key Responsibilities: Perform the following under supervision of Project Lead Engineer: • Complete Electrical designs and layouts for complete systems and components of a project, • Performs project design packages typically comprising one lines, layouts, MTOs, installation details, etc., • Ensures compliance with required specifications, tolerances, safety factors, and client requirements, • Understands and applies commonly used company design standards and methods., • Designs and creates orthographic (2D) drawings, • Collaborates with Engineers and Designers to ensure quality of design, • Responsible for ensuring that tasks assigned are completed on time and are of good quality, • Other items as required by Engineering management teamRequirements: Required Qualifications & Experience: • Associates in CAD & Design or Electrical Engineering from accredited university, • 4+ years of relevant experience in Electrical Design required, • Strong computer skills and proficiency with MS Office products (Outlook, Word, Excel & Power Point) & various pdf editing/mark up software, • Demonstrated proficiency to do AutoCAD drawings, • Physical requirements and working conditions: Must possess mobility to work in a standard office setting including performing occasional site visits and to use standard office equipment, including a computer, stamina to maintain attention to detail despite interruptions, strength to lift and carry [files weighing up to 20 pounds]; vision to read printed materials and a computer screen, and hearing and speech to communicate in person and over the telephone. Preferred Skills: • Construction, Utility, Substation Design, or Oil and Gas Industry preferred, • Ability to multi-task and handle multiple projects, • Effective written and oral communications, • Ability to work in a team environment and coordinate with other areas to achieve goals and objectives, • Ability to effectively manage time and complete assignments on a timely basis, • Ability to develop a good understanding of Company standards, practices and procedures pertaining to engineering and design, • Work with minimum supervision, be a self-starter, be able to meet goals and deadlines on own initiative, • Be self-motivated and able to maintain deadlines of assigned project deliverables, via reports from project management scheduling software, • Developing a good understanding of Company standards, practices and procedures pertaining to engineering and design., • Understanding of cable sizing, conduit / cable, and tray fill calculations, • Knowledge of electrical power distribution and control systems design and understanding of the National Electrical Code (NEC) Your Rewards! · Medical, Dental, Vision, and Prescription Drug Insurance · Company-Paid Life Insurance · Disability Insurance · Paid Family Leave · Flexible Spending Account (FSA) · Health Savings Account (HSA) · Wellness Programs and Incentives · 401(k) Retirement Plan & Company Match · Paid Time Off – Sick & Vacation Time · Paid Holidays · Hybrid Work Schedule! · Cool Open-Office Concept Do you have what it takes to join the ERock team? Send us your resume today. The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. ERock is committed to creating a diverse environment and is proud to be an equal opportunity employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, gender, gender identity or expression, sexual orientation, national origin, genetics, disability, age, or veteran status. At ERock, we embrace diversity, including all the unique characteristics that make us human: race, age, sexual orientation, gender identity, religion, disability, and education — to name a few. We understand and recognize that diverse backgrounds and perspectives strengthen our teams and our business. The foundation of our diversity efforts is closely tied to our core values specifically our value of “The Team” which includes “Mutual Respect, Openness, and Honesty.”

Job Description Basic Function Dynamic leader in sustainable resource management, providing clean water, renewable energy, and water treatment as a service Project Engineer with a strong project execution background to join the company’s team. The ideal candidate will be a pro-active problem solver capable of working with the Project Manager to engineer wastewater-to-energy plants to customers on time and on budget. Role includes providing site engineering, construction, installation, and commissioning support to the project execution team-members. Candidate will be able to perform a variety of project engineering and field engineering tasks, including support of site engineering and system installation, coordination with equipment suppliers, sub-contractors, customers. To be considered, you must have experience in water, wastewater, food and beverage manufacturing, chemical process design, or similar fields, and familiarity with the basics of wastewater treatment equipment. Strong communication, problem solving, self-organizing skills are a must. The ideal candidate will have a passion for sustainability and the environment, will thrive in a fast-paced entrepreneurial setting, be self-motivated, and have an interest in cutting edge technology. Think big, think differently, be ambitious and consider joining a company that values creativity, collaboration, teamwork, and sustainability. Typical Duties • Support Project Manager in coordination with internal resources, external subcontractors, and consultants to ensure that projects are delivered on time and on budget., • Understand Project budgeting, updates and reporting, • Plan, sequence, and maintain project schedules with support of engineering and subcontractors., • Responsible for selection of pumps, process equipment, valves, and instruments, • Coordination with suppliers and vendors for equipment selection, quality requirements and delivery schedules, • Manage project documentation, including determining which documentation is required for a given project, ensuring that proper revisions are made throughout the delivery process, and establishing standards that are in-line with industry., • Coordinate requirements of governing authorities for permits, inspections, and final approval of the project., • Support the Project/Construction Manager during construction and commissioning. Required Qualifications • Bachelor’s Degree in chemical, environmental, mechanical, marine, facilities engineering or similar., • Experience in the wastewater or food and beverage manufacturing industries of equipment systems that use aerobic and/or anaerobic digestion technology to treat wastewater, and the subsystems which support them. • 3+ years with total project responsibility for complex equipment systems in excess of $1 million dollars., • 3+ years’ experience working with vendors, customers and trades including electrical, piping and construction personnel., • Superb ability to interact with customers, including strong communication and presentation skills, affable, and demonstrated maturity and professionalism., • Demonstrated experience in process engineering problem solving and system integration, preferably in the food and beverage processing or wastewater industries., • Ability to work in a cross-functional team environment., • Stellar written and verbal communication skills., • Must be able to exhibit strong leadership ability and have a professional demeanor., • Proactive, problem-solving personality required. Skills/Desired Qualities • Self-motivated, decisive, with the ability to adapt to change and competing demands, • Strong leadership, diplomatic and motivational skills including the ability to lead up, across and down multiple business functions, • Flexible with proven ability to conform to shifting priorities, demands and timelines through analytical and problem-solving capabilities Company Description Cambrian is a dynamic leader in sustainable resource management, providing clean water, renewable energy, and water treatment as a service. Cambrian's resource management solutions deliver real, tangible results to people, businesses, the planet, and some of the top names in food and beverage processing including: LVMH-Domaine Chandon, AB InBev, Keurig Dr Pepper, Russian River, Treehouse Brewing Company. Cambrian’s award-winning EcoVolt® and BioViper® product suites offer cost-effective and sustainable options for onsite wastewater treatment, water reuse, and clean energy generation. Through its water-energy purchase agreement (WEPA®), a leading-edge financing platform, Cambrian offers wastewater treatment and resource recovery as a service with no upfront costs. Cambrian Innovation’s robust research and development group is also commercializing a broader portfolio of environmental productions to help industrial clients efficiently manage their resources. Equal Employment Opportunity Statement Cambrian Innovation Inc. is an Equal Employment Opportunity (EEO) employer and welcomes all qualified applicants. Applicants will receive fair and impartial consideration without regard to race, sex, color, national origin, age, disability, veteran status, genetic data, gender identity, sexual orientation, religion or other legally protected status, or any other classification protected by federal, state, or local law. EEO is the Law Poster: http://www1.eeoc.gov/employers/poster.cfm Applicants must be eligible to work in US without restrictions for any employer at any time. As a condition of employment, all selected candidates will undergo Cambrian Innovations’ standard pre-employment checks, including but not limited to a background check regarding criminal history, driver’s license, education and employment. Cambrian Innovation does not accept unsolicited candidate referrals or resumes/CVs from third- party vendors, including recruitment agencies. Cambrian Innovation will not be responsible or liable for any fees or costs associated with such unsolicited submissions.

Job Description Propulsion Engineer – Lunar Lander Programs (Nova-C & Nova-D) Houston, TX About Intuitive Machines: Intuitive Machines is an innovative and cutting-edge space company making cislunar space accessible to both public and private customers. Our mission is to further science and exploration, communications, and economic progress from the Earth to the Moon and beyond. With multiple NASA lunar missions in development and additional private missions on our manifest, we pride ourselves in supporting NASA, our customers, and the nation in paving the way to return humans to the surface of the Moon. Our world-class team includes experts in all aspects of spacecraft subsystems design, development, and test, on-orbit operations, and safety. About the Position: We are seeking Propulsion Engineers to support the development, test, integration, and operation of Intuitive Machines' Nova-C and Nova-D lunar lander programs. This requisition may be filled at various engineering levels depending on experience, demonstrated capability, and scope of ownership. Nova-C and Nova-D are Intuitive Machines' lunar lander platforms supporting NASA's Commercial Lunar Payload Services (CLPS) initiative, Artemis objectives, and future commercial lunar operations. These vehicles deliver scientific payloads, communications infrastructure, technology demonstrations, and surface systems in support of sustained lunar exploration and commercial activity. Responsibilities: • Design, analyze, and develop spacecraft propulsion systems and components, including monopropellant, bipropellant, cryogenic, and pressurized fluid systems., • Support propulsion hardware through design, fabrication, integration, qualification, acceptance, vehicle testing, launch campaigns, and flight operations., • Contribute to propulsion system requirements development, verification planning, lifecycle traceability, and technical documentation from concept through flight., • Plan, execute, and review component-level and integrated propulsion test activities, including development, qualification, acceptance, and troubleshooting campaigns., • Design, build, operate, or improve propulsion test equipment and ground support hardware with a strong emphasis on safety, configuration control, and data quality., • Review and disposition test data, support anomaly investigations, and implement corrective actions as required., • Collaborate closely with systems engineering, manufacturing, safety and mission assurance, suppliers, technicians, and operations teams throughout the hardware lifecycle., • Depending on experience and demonstrated capability, lead technical efforts, mentor engineers, and coordinate activities across multiple disciplines. Requirements: • Bachelor's degree in Mechanical, Aerospace, or related Engineering discipline from an accredited institution., • Strong fundamentals in fluid mechanics, thermodynamics, heat transfer, and propulsion system behavior., • Experience supporting hardware through design, build, test, qualification, acceptance, production, or operational phases., • Ability to develop and execute engineering analyses, test procedures, and technical documentation., • Experience reducing, interpreting, and communicating engineering and test data., • Proficiency with CAD and engineering analysis tools., • Strong written and verbal communication skills and sound engineering judgment., • Ability to work effectively in a collaborative, cross-disciplinary engineering environment., • Strong organizational skills and ability to manage multiple parallel tasks., • Willingness to support test campaigns, launch campaigns, and mission operations schedules when required., • Alignment with Intuitive Machines' core values: Respect, Integrity, Dedication, and Excellence. Preferred / Differentiating Experience: • Experience with lunar landers, spacecraft propulsion systems, launch vehicles, spacecraft fluid systems, or other aerospace flight hardware., • Demonstrated ownership of propulsion hardware, subsystems, test campaigns, or other complex aerospace technical scope., • Background in propulsion component development, fluid systems engineering, plumbing design, fabrication, hardware integration, or propulsion testing., • Familiarity with cryogenic fluids, pressurized systems, valves, regulators, tanks, feed systems, and propulsion integration., • Hands-on experience with hardware fabrication, assembly, welding support, test operations, or flight hardware integration., • Experience developing and validating propulsion system, fluid network, thermal-fluid, or performance models using tools such as GFSSP, Easy5, SINDA/FLUINT, Thermal Desktop, or equivalent engineering software., • Experience with MATLAB, Python, LabVIEW, or similar engineering analysis and automation tools., • Experience using Creo or equivalent CAD platforms., • Exposure to NASA, DoD, or other aerospace standards, reviews, and certification processes., • Mission operations, launch campaign, or flight test experience. US EEO Statement: Intuitive Machines is an Equal Opportunity employer. All qualified applicants will receive consideration for employment without regard to sex, gender identity, sexual orientation, race, color, religion, national origin, disability, protected veteran status, age, or any other characteristic protected by law.

Job Description JOB SUMMARY We are seeking a Senior HPC Engineer with deep hands-on experience in high-performance computing (HPC), hybrid cloud infrastructure, and large-scale genomic data platforms. This role will design, build, and operate scalable, high-throughput computing environments supporting clinical and research bioinformatics workflows processing tens of thousands of samples per month. The ideal candidate combines strong systems engineering skills with bioinformatics domain knowledge and has proven experience managing petabyte-scale storage, workflow orchestration (e.g., Nextflow), and hybrid (on-prem + cloud) compute environments. KEY RESPONSIBILITIES · Lead the design and operation of scalable HPC infrastructure supporting bioinformatics pipelines. · Develop and maintain production genomic analysis pipelines using Nextflow and related workflow tools. · Oversee deployment and optimization of large-scale NGS analysis workflows. · Establish best practices for pipeline reproducibility, containerization, and workflow management. · Manage and mentor a team of bioinformatics engineers and computational scientists. · Collaborate with lab directors/genomic scientists, bioinformaticians, and IT teams to gather requirements and design scalable solutions. · Optimize pipeline performance, compute utilization, and data processing throughput. · Ensure proper documentation, testing, and maintenance of bioinformatics software and workflows. · Implement monitoring and operational best practices for production bioinformatics platforms. · Ensure compliance with company policies and quality standards. · Adhere to Code of Conduct as outlined in the Baylor Genetics Compliance Program. · Perform other duties as assigned to support team and organizational objectives. · Comply with all company policies, procedures, and applicable regulatory requirements. QUALIFICATIONS · PhD in Bioinformatics, Computational Biology, Computer Science, or related field preferred; MS with extensive industry experience may be considered. · 8+ years’ experience in bioinformatics software engineering, computational genomics, or related field. · 4+ years’ experience leading or mentoring bioinformatics or software engineering teams. · Strong experience managing High Performance Computing (HPC) environments and distributed computing systems. · Hands-on experience with HPC workload schedulers such as Slurm or similar cluster resource managers. · Deep experience developing scalable workflow pipelines using Nextflow or similar workflow frameworks. · Strong programming skills in Python, Bash, and/or R. · Strong Linux/Unix system experience including cluster-based computing environments. · Experience with containerization technologies such as Docker and Apptainer (Singularity). · Experience implementing reproducible pipeline environments using container-based deployment. · Experience with CI/CD practices, version control (Git), and automated testing. · Experience supporting large-scale genomics datasets including WGS, WES, RNA-seq, or multi-omics pipelines. · Experience with cloud computing platforms such as Azure or AWS is strongly preferred. · Strong written and verbal communication skills and ability to collaborate across interdisciplinary teams. · Equivalent combination of education and experience may be considered. PHYSICAL DEMANDS AND WORK ENVIRONMENT · Frequently required to sit · Frequently required to stand · Frequently required to utilize hand and finger dexterity · Frequently required to talk or hear · Frequently required to utilize visual acuity to operate equipment, read technical information, and/or use a keyboard · Occasionally exposed to bloodborne and airborne pathogens or infectious materials EEO STATEMENT Baylor Genetics is proud to be an equal opportunity employer committed to fostering an inclusive and diverse workplace. We welcome and encourage applicants from all backgrounds to apply. We do not discriminate on the basis of race, color, religion, national origin, sex, sexual orientation, gender identity, age, veteran status, disability, genetic information, pregnancy, childbirth, or any other status protected by applicable federal, state, or local law. If you need an accommodation during the application process, please contact our Human Resources team. Note to Recruiters: We value building direct relationships with our candidates and prefer to manage our hiring process internally. While we occasionally partner with select recruitment agencies for specialized roles, we do not accept unsolicited resumes from recruiters or agencies without a written agreement executed by the authorized signatory for Baylor Genetics ("Agreement"). Any resumes submitted to Baylor Genetics in the absence of an Agreement executed by Baylor Genetics' authorized signatory, will be considered the property of Baylor Genetics, and Baylor Genetics will not be obligated to pay any associated recruitment fees.

Job Description Title: Electrical Engineer Location: Pasadena, TX Who we are: Voted one of the Nation's Best and Brightest Companies to Work for, Kuraray America, Inc. (KAI) is a global leader in specialty chemical, fiber, and resin production. With top-of-the-line research and production facilities and a vast network of supplies from around the world, Kuraray leads the industry in specialty dental, fiber, resin, and elastomer products. Kuraray America is a wholly owned subsidiary of Kuraray Company, Ltd. Based in Tokyo, Japan. Kuraray has operations in 33 countries and employs more than 12,000 employees, including over 800 in the United States. Why Kuraray: Kuraray is building a better tomorrow, today. Our team members are dedicated to expanding our business with committed professionals who share essential values such as integrity, excellence, teamwork, and accountability. As a part of Kuraray America, Inc., our team shares the advantages of working for the leader in specialty chemicals, resins, and fibers. Our international presence and resources allow us to be a world-leading innovator in the industries we service. Yet, despite our size, our people are more than just a number. As a new team member, you can expect to earn responsibility quickly. Our commitment to our people is visible in our comprehensive benefits package. As a Kuraray team member, you will have the opportunity to enjoy competitive salaries and benefits, incentive opportunities, and an excellent work environment. Position Summary: The Electrical Engineer serves as the site's subject matter expert (SME) for electrical and instrumentation systems, providing leadership in design, reliability, and strategic improvement initiatives. This role oversees complex electrical infrastructure projects, ensures power distribution reliability, and supports plant operations through advanced troubleshooting and system optimization. The engineer mentors junior staff, collaborates cross-functionally, and drives innovation in energy management and equipment reliability. Responsibilities: Electrical & Power Systems Leadership • Lead design and analysis of power distribution systems including substations, transformers, switchgear, circuit breakers, motor starters, protection relays, and generators., • Conduct short-circuit, protective device coordination, and arc-flash studies., • Establish and maintain reliability and PM programs for power distribution systems, including coordination of outages with power suppliers and utilities., • Oversee acceptance testing and commissioning of new electrical infrastructure; manage VFD selection and maintenance., • Ensure compliance with NEC, IEEE, ANSI, IEC, and applicable corporate and regulatory standards. Instrumentation & Controls • Provide technical support and maintenance for process instrumentation including pressure, flow, density, and viscosity transmitters and control valves., • Support integration between instrumentation, PLCs, and DCS platforms (Yokogawa preferred) and develop strategies to improve calibration and system reliability. Projects & Strategic Initiatives • Manage large-scale electrical and I&E capital projects from concept through commissioning., • Review and approve equipment specifications, vendor drawings, and installation standards., • Collaborate with external engineering firms and utilities on design and infrastructure upgrades., • Lead cost reduction, energy efficiency, and modernization projects. Reliability & Maintenance Excellence • Develop long-term reliability strategies for power and control systems using predictive and condition-based maintenance., • Partner with maintenance and reliability teams to analyze failure data and implement sustainable improvements., • Serve as technical authority during shutdowns, startups, and complex maintenance events. Leadership & Collaboration • Mentor junior engineers and technicians and provide site training on electrical safety and system operation., • Collaborate with Operations, Maintenance, Site Technical, and Line Management; represent the site in corporate technical networks as applicable. Minimum Qualifications: • Bachelor's degree in Electrical Engineering (Master's preferred)., • Minimum of 8 years of experience in industrial electrical engineering, preferably in chemical or manufacturing environments., • Deep expertise in medium/high voltage power systems, protection relays (GE Multilin), and VFDs., • Proficiency in electrical standards (e.g. NEC, IEEE, ANSI, IEC etc.) required., • Strong trouble shooting skills and PLC expertise., • Proficiency in SAP and other computer software's like Power BI, Excel, SharePoint., • Advanced proficiency in power system studies and electrical reliability programs., • Proven leadership in capital project execution and contractor management., • Strong knowledge of instrumentation systems, DCS communication, and automation integration., • Excellent communication, planning, and leadership skills., • Professional Engineer (PE) license or pursuit strongly preferred., • Valid driver's license required. Competencies: • Customer Focus, • Building strong customer relationships and delivering customer-centric solutions., • Business Insight, • Applying knowledge of business and the marketplace to advance the organization's goals., • Cultivates Innovation, • Creating new and better ways for the organization to be successful., • Action Oriented, • Taking on new opportunities and tough challenges with a sense of urgency, high energy, and enthusiasm., • Ensures Accountability, • Holding self and others accountable to meet commitments., • Drives Results, • Consistently achieving results, even under tough circumstance, • Collaborates, • Building partnerships and working collaboratively with others to meet shared objectives., • Values Difference, • Recognizing the value that different perspectives and cultures bring to an organization, • Communicates Effectively, • Developing and delivering multi-mode communications that convey a clear understanding of the unique needs of different audiences., • Courage, • Stepping up to address difficult issues, saying what needs to be said., • Instills Trust, • Gaining the confidence and trust of others through honesty, integrity, and authenticity., • Situational Adaptability, • Adapting approach and demeanor in real time to match the shifting demands of different situations. We offer a competitive compensation package that includes base pay and an annual incentive. This program is designed to reward individual performance and align overall rewards with corporate and team performance. Our employees benefit from a robust healthcare package that includes wellness reimbursements, along with generous perks such as three weeks of paid time off, ten company holidays, paid parental leave, education reimbursement, and a matching 401k plan, among other offerings. Applicants must be authorized to work for ANY employer in the U.S. Learn more at kuraray.us.com/careers/ Kuraray America, Inc. is an Equal Employment Opportunity/disability/protected veteran status No third-party candidates accepted. Job Posted by ApplicantPro

Job DescriptionPurpose of the position The Product Quality Engineer is a professional who understands the principles of product and service quality evaluation and control. This body of knowledge and applied technologies include, but are not limited to, development and operation of quality control systems, application and analysis of testing and inspection procedures, the ability to use statistical methods to diagnose and correct improper quality control practices, an understanding of human factors and motivation, facility with quality cost concepts and techniques, and the knowledge and ability to develop and administer management information systems and to audit quality systems for deficiency identification and correction. This position will be responsible for the implementation, use, compliance and maintenance of quality systems and tools including the Quality Management System. Duties and Responsibilities • Define the product quality control plan and audit the implement status of quality control plan., • Works with cross-functional teams to prioritize key site projects and determine appropriate resources and timing; integrate activities using quality principles such as lean Six Sigma with Quality Management System activities such as Corrective and Preventive Action (CAPA) and Quality Improvements to assure effectiveness and compliance to customer and regulatory requirements., • Evaluates performance of current operational Quality and Quality Engineering methods (e.g., failure analysis, measurement systems analysis, process development, etc.) and drives best practices throughout the business and transfers that knowledge across the business, as appropriate., • Reports significant issues or developments identified during Quality activities and provides recommended process improvements to management., • Becomes proficient in the various business systems used at First Quality, including MES, quality data collection systems and understands how the systems are integrated with each other and within the business Education and work experience • Bachelor’s degree in Engineering discipline or a technical field with 2 years of quality or electrical manufacturing experience required., • Three or more years in quality or manufacturing engineering strongly preferred., • Highly qualified candidates would have an advanced degree in Analytics and/or ASQ CQA or CQE certification, and/or Lean or Six Sigma certification, • Experience in technical problem solving, statistical analysis, and quality auditing preferred. Supervision This role provide does not need indirect supervision/mentorship/coaching Working conditions • Office-based role, fast-paced work environment Skills: • Having 2 years working experience of product/process analysis and handling customer complaint for electronic product., • Familiar with applying quality control tools to analyze and complete quality problem report., • Good quality awareness and interpersonal communication skills., • Strong knowledge of MS-Office products and proficiency in Mini Tab, • Strong communication and coordination skills. Powered by JazzHR uYKUghGaBO

Job DescriptionWhat We Offer: Our excellent salary and benefits package includes medical, dental, vision, life insurance, short and long-term disability coverage, education reimbursement, 401(k), performance bonuses, and an employee stock program. Employee Resource Groups and Programs offered include the Young Professionals Group, Women at Wade Trim, Diversity, Equity and Inclusion, Professional Development, Leadership Development, Rotation Program, Mentor Program, Sustainability Program, and Wellness Program. Position Description: We are looking for a Senior Water/Wastewater Process Engineer to join our Water Team to improve infrastructure in our Dallas offices. The candidate must be a licensed PE with a bachelor's degree in civil or environmental engineering and have at least fifteen years of experience in process engineering, facility design, project specifications, and application to water and wastewater treatment facilities. The candidate must also be self-motivated, work well with others, and have excellent writing, organizational, and communication skills. A flexible hybrid-remote work schedule is available after 30 days of employment.Typical responsibilities include: • Provide project management, technical planning, design and construction support on various stormwater, water and wastewater treatment and collection system projects, • Become the client manager for targeted key clients, • Actively participate in improving Wade Trims visibility and brand, • Prepare engineering calculations and supporting analysis of alternatives, • Develop and complete applications, permits, engineering reports and specifications, • Prepare and review engineer estimates, • Prepare design cost estimates, • Conduct research and development for projects, • Monitor task budget and progress, • Prepare project status and other reports, • Communicate project details with other design engineers, • Conduct project cost reviews, • Promote sales, • Prepare and review scope, budget and schedule for project tasks, • Assist with proposals, marketing, project reports and technical presentations, • Conduct on-site inspections as needed, • Attend and/or conduct client and project meetings, • Attend various meetings including pre-design, plan review, pre-construction, professional organization, staff, etc., • Attend seminars and/or training classes, • Maintain excellent client relations, • Maintain a safe working environmentEducation:, • Bachelor's Degree in Civil or Environmental Engineering requiredSkills/Experience:, • 15+ years of related experience required, • Licensed Professional Engineer requiredAbout Wade Trim: Wade Trim is committed to maximizing the value of infrastructure investments. We’ve been solving complex engineering challenges for a century. We customize our work approach to fit each project using a collaborative, friendly style to deliver solutions our clients can stand behind. Our supportive culture recognizes and strives to fulfill collective client, company, and individual needs. Mentoring and building skills of Wade Trim staff is a priority. Frequent interaction among staff is encouraged, company leadership is easily accessible, and opportunities are provided for staff to help shape the firm’s future through strategic planning. Work/life balance is supported through a flexible, hybrid work schedule that brings team members together in the office at least three days a week and connects them virtually when working from home. To solve our clients’ toughest challenges, we’ve devoted ourselves to delivering innovative solutions. Our Office of Applied Technology (OAT) is dedicated to seeking new technologies or ways to apply existing technologies to enhance value to our clients and positively impact communities. All staff are encouraged to share ideas and suggestions for innovative technologies or processes to adopt. This open-minded approach enables us to advance technology, foster innovation, and stay ahead of our clients’ needs. Wade Trim’s success is shared by the employees that make it happen. Since our beginning, our firm has been 100% employee owned. This cultivates an ownership mindset that benefits our work approach, collaborative culture, and ability to deliver client solutions. We believe employee ownership drives the sustainability and growth of our firm and provides all our employees with opportunities for financial success. If you are looking for a challenging and rewarding career in a friendly environment, please submit your resume by visiting the Careers section of our website at http://www.wadetrim.com/careers. Wade Trim does not accept unsolicited resumes, candidate profiles, or CVs from third-party recruiters or employment agencies. Any submission made without a valid, signed agreement and an approved engagement request from Wade Trim’s People Services Team will be considered the property of Wade Trim. Wade Trim reserves the right to pursue and hire any candidate submitted through unsolicited means without any financial obligation to the recruiter or agency. A valid agreement can only be signed by the Director of People Services. Resumes or candidate profiles submitted at the request of a Wade Trim employee who is not authorized by the People Services team do not constitute a valid engagement. Recruiters and agencies must have a current, written agreement authorized by the Director of People Services to be considered an approved vendor. Wade Trim is an Affirmative Action/Equal Opportunity Employer.

Job Description WELCOME TO JOHNSTON Johnston is a collaboration of experienced engineers, architects, planners, and managers working together to create thoughtful and functional design throughout the great state of Texas. We work on projects that make a difference in people’s lives and make our world a safer place. Mission: Our people are the heart of our business. We build highly engaged and collaborative teams dedicated to executing thoughtful, creative design solutions. We are passionate, optimistic, dedicated, efficient, and driven by our entrepreneurial roots. Vision: To provide the best client service in design and construction. Our Vision is reflected in our designs, our team members, and our culture. It has resulted in the strong, trusting relationships we have with our clients today and the standard we aspire to maintain in the years to come. People: At Johnston, we seek people who are creative and enjoy solving problems, while having fun along the way. Individuals who embrace a team approach, committed to growing and developing their talents, enjoy mentoring and coaching others, and contribute to a fantastic company culture are who we are as a team and a firm. TRUST. RESPECT. INTEGRITY. SUMMARY: In partnership with the Mechanical Team Leader, the Senior Mechanical Engineer is responsible for a project’s HVAC system design and implementation and associated project deliverables. This role is responsible for the successful delivery of medium to large building projects, developing project concepts and budgets, completing site assessments, and writing reports to create solutions for our clients. This position is also responsible for managing and mentoring a team of Engineers and Designers. EDUCATION AND EXPERIENCE: • Bachelor of Science in Mechanical Engineering., • Licensed PE., • 10+ years project engineering experience from concept to client delivery in HVAC Design, Building Mechanical Systems, and Central Utility Plants., • Experience in healthcare, government, commercial, manufacturing, and/or education required., • Experience in healthcare preferred., • Experience working in integrated teams and mentoring junior team members., • Experience in leadership role on a consulting team., • Knowledge and ability to review drawings for quality assurance & quality control., • Advanced knowledge in mechanical engineering, associated systems, calculations, and construction methods., • Experience with various analysis tools for mechanical system design., • Experience in mechanical specification development and writing., • Experience working with Revit and BIM., • Proficient in Microsoft Office, including Word, Excel, PowerPoint, and Outlook. ROLES AND RESPONSIBILITIES: • Performs and supervises preparation of technical drawings and assessment reports., • Develops typical details, specifications, and drawing standards including development of Revit standards in coordination with the team., • Maintains knowledge of industry trends and technology updates and recommends changes in approach and client services, as appropriate., • Provides design inputs and reviews of team members’ projects to verify conformity to quality assurance, quality control, and best practice standards., • Provides technical support and project communications to team, as required., • Participates in team meetings to help resolve project issues, coordination with other disciplines, schedule adherence, technical issues., • Performs site visit surveys to determine engineering strategies and to document and evaluate existing systems., • Visits project sites during construction for quality, progress, and compliance review with specifications and standards., • Reviews and provides responses on “Request for Information” and “Submittals” during the construction administration phase., • Attends and participates in Owner-Architect-Contractor meetings as required, • Responsible for communication with other disciplines, vendors, and contractors to ensure incorporation of all information into project requirements and provides support, as necessary., • Mentors less experienced engineering team members., • Works on developing a positive relationship of trust with the team., • Provides support to the Business Development team including write-ups of key aspects of projects and presentation of work at industry events., • Collaborates with Marketing in preparing RFQ and RFP packages. ATTRIBUTES & ABILITIES: • Committed to exceptional external and internal client service., • Collaborates with multiple disciplines across the practice at all levels., • Ability to solve problems both individually and as part of a project team., • Able to creatively reach solutions to complex problems., • Creative, innovative, and strategically thinks outside the box., • Open to advice while exercising independent judgement when making decisions., • Result driven by planning, prioritizing, and meeting deadlines., • Ability to multitask and work in fast paced environment., • Ability to independently prioritize tasks and delegate when appropriate., • Highly organized and detail oriented., • Ability to communicate effectively, both verbal and written., • Excellent writing, editing, and proofreading skills. COMPANY CULTURE: • Demonstrates strong leadership, communication, and relationship management skills., • Ability to teach and mentor others., • Effective listener and clear communicator., • Respects the time of others; schedules and attends meetings timely and comes prepared., • Acts with integrity, professionalism, and confidentiality., • Promotes and upholds the Johnston culture. Honesty. Integrity. Respect., • Embodies the attributes of an “Ideal Team Player” (Humble, Hungry, People Smart). Johnston provides equal employment opportunities (EEO) to all employees and applicants for employment without regard to race, color, religion, marital status, sex, sexual orientation, gender identity, genetic information, pregnancy, national origin, age, disability, or protected veteran status. In addition to all Presidential Executive Orders and federal law requirements, Johnston complies with applicable state and local laws governing nondiscrimination in employment. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions.

Job DescriptionSalary: $85,00000 - $95,000.00 Join PBS Engineers And Help Us Transform The Industry Are you a driven professional seeking new challenges while advancing your career? PBS Engineers is looking for talented individuals to join our team and help us deliver exceptional service to our clients. If you thrive in a collaborative environment and are passionate about providing top-tier engineering solutions, you belong at PBS. As a dynamic firm committed to quality and excellence, we see our team as a family and prioritize the professional growth of each member. Our unwavering dedication to superior engineering has earned us extensive experience across diverse market sectors. With offices in San Dimas (Headquarters), San Diego, Orange County, Los Angeles, Santa Clara, and Houston, our engineers work closely with our Principals to provide personalized service to every client. At PBS, we foster a unique workplace culture where employee well-being and satisfaction are at the heart of our mission. By investing in our engineers, we empower our team to excel together, strengthening our position as a leader in consulting engineering. Were ready to invest in youlets grow and lead the industry together! Visitwww.pbsengineers.comfor more information on our dynamic team. Our mission at PBS is to provide WOW through service via our personalized solutions and hands-on approach. We request that the following PBS Core Values be upheld to support our continuous growth and that you commit to embracing these fundamental principles: • Work Hard, Play Hard, • Be Better Than You Were Yesterday, • Supporting Team Member Excellence & Happiness, • Go the Extra Mile, and Then Some, • Build Lasting Relationships and a Family Spirit, • Be a Speed Boat Mid-Level Plumbing Engineer Roles and Responsibilities We are seeking an experienced Mid-Level Plumbing Design Engineer to join our team. The ideal candidate will have knowledge in various Plumbing system designs, project coordination, and industry codes and standards. This role involves working on design projects, communicating with clients and architects, and collaborating with cross-discipline teams to deliver innovative Plumbing solutions for various sectors including commercial, retail/hospitality, industrial, healthcare, aviation, transportation (rail/transit/ports), education, and civic/community. Key Responsibilities: • Provide the design, analysis, and implementation of Plumbing systems for various projects., • Develop detailed Plumbing drawings, specifications, and schematics using CAD and BIM software., • Ability to size equipment, perform calculations, and design plumbing systems including domestic hot and cold water, sanitary waste and vent, grease waste, storm drain, booster pumps, sewage ejectors, sump pumps, natural gas, compressed air, acid waste, medical gas, and basic fire protection., • Ensure compliance with industry standards, local building codes, and sustainability requirements., • Collaborate with architects, contractors, owners, and other engineering disciplines to define project scope and integrate Plumbing systems seamlessly., • Provide technical guidance and mentorship to junior engineers and design staff., • Review and approve project documentation including calculations, equipment schedules, construction drawings, RFIs, and submittals., • Conduct site inspections to verify existing conditions and ensure installation compliance., • Stay current with emerging Plumbing technologies and industry trends to drive innovation and efficiency., • Participate in project planning, report writing, budgeting, and scheduling activities. Job Qualifications and skills Minimum qualifications: • 3-6 years of experience in Plumbing system design and engineering for facilities/buildings., • Excellent communication and interpersonal skills to work in a collaborative team environment., • Ability to work well under pressure, juggle multiple projects concurrently, and motivate multi-discipline project teams in meeting client needs in a timely manner and within budget objectives., • Strong project management and leadership capabilities., • Excellent problem-solving, analytical, and decision-making skills., • Strong organizational skills, creativity, and enthusiasm., • Proficiency with Microsoft Office (Word, Excel, Outlook, Teams)., • Proficiency with Revit and AutoCAD design software. Preferred qualifications: • Bachelor of Science in Mechanical Engineering or CPD certification is a plus., • EIT or Professional Engineer License is a plus. Pay and Benefits • Full-Time Career Position with highly competitive pay that includes performance-based incentive plans., • Retirement Savings 401(k) plan with corporate matching., • Excellent Full Benefits Package: Includes comprehensive Health, Dental, and Vision Insurance for employee and immediate family and Group Life/AD&D insurance for employee., • Availability of Voluntary Life Insurance, Short Term Disability, Long Term Disability, and Health Savings Account (HSA) and Flexible Spending Account (FSA) options., • 11.5 paid holidays per year., • Paid Time Off for sick leave and vacation., • A highly sought-after work environment which fosters creativity and collaboration., • Professional development and continuing education opportunities., • Growth potential within the company thats unique within our industry and offers clear career path options., • Associate-Senior Associate-Principal (ASAP) Program offered to encourage employees to take a more active role in the corporation and build a more secure and rewarding future., • Receptive and Forward-Thinking Leadership. If you are a highly motivated and detail-oriented Plumbing Design Engineer looking to take on a senior role at a growing and industry-leading firm, we encourage you to apply and join our team!

Job DescriptionFoxconn Industrial Internet (FII) provides innovative design and advanced manufacturing capabilities. FII centers around Cloud Based Computing, Big Data, High-Speed Networks, Automation, and Industry 4.0 methodology. Join an expansive network of professionals who work together within a company culture of one shared mission. FII is seeking a highly motivated Thermal Mechanical Engineer (or equivalent) with expertise in thermal and fluids engineering to contribute to the cooling of servers. As a part of the Server R&D team, the Thermal Mechanical Engineers utilize CAD software to address thermal challenges in support of server designs and technical proposals, review design work with customers and collaborate with multi-functional teams to optimize designs, validate design work, and release the products to volume manufacturing. Responsibilities: • Work on R&D, perform thermal solutions with specifications, analytical and computational analysis, designs and characterizations including CFD simulations and CAD designs, along with laboratory validations of prototypes and manufacturing implementations from chip-to-board level thermal solutions through focus on system level to deliver innovative, compliant and commercially viable server products to the marketplace in a timely and cost-effective manner., • Collaborate with cross functional product development teams and overseas partners to meet reliability, power efficiency, system performance, and cost requirements., • Investigate new technology and designs during the product lifecycle of the project and drive design decisions; analyze/implement trade-offs while contributing to thermal solutions of product designs from conceptualizations to productions., • Compile test reports, summaries, and document investigations to contribute to insights to system layouts and product/solution improvements., • Report analyses results and design specifics to internal managements and external customers. Qualifications: • Minimum of Bachelor’s degree in an Engineering Discipline. An advanced engineering degree (MS or Ph.D.) with an emphasis on thermal sciences would be an added plus., • Strong fundamental backgrounds in heat transfer and fluid mechanics, understanding of cooling techniques for electronic components and equipment such as the passive and active heat transfer, air cooling, liquid cooling, two-phase immersion cooling, heat sinks, heat pipes, vapor chambers and fans thorough graduate level course works or industry experiences., • Knowledge of semiconductor, package and PCB designs and thermal testing. Experience working with Integrated Circuit (IC) physical design parameters affecting electrical and thermal performance of packaging technologies. Thermal Mechanical Engineer • Knowledge of the thermal analysis and computational modeling, development of thermal solutions and methodologies at the server and system-level for semi-conductor products, data analysis and product characterizations, optimizations of thermal controls for increased quality and cost improvements, developments of thermal management techniques, • Strong knowledge of CFD principals as well as working experiences in creating analytical and numerical modes using CFD tools such as FloTherm, ANSYS-IcePak and Fluent etc., • Experience with defining thermal test plans, design of experiments on prototypes. Experiences in instrumentations, data acquisitions and data analysis, including uncertainty analysis. Experiences with various temperature, pressure and fluid flow measurement techniques. Basic controls, automations, acoustical knowledge is a plus., • Some experience with 3D/2D models utilizing CAD tools such as PTC Creo or Pro/Engineer or SolidWorks etc. is a major plus., • Good ability to visualize and clarify product needs from fundamental concepts through system considerations to ensure optimized designs., • Good written and verbal communication skills, strong analytical and problem solving ability and effective teamwork throughout the organizations. Benefits: • 401(k) with matching contributions, • Health, Dental and Vision insurances, • Disability insurance, • Health savings account, • Life insurance, • Paid Time Off Foxconn Industrial Internet (FII) does not accept unsolicited resumes from headhunters, recruitment agencies or fee based recruitment services. FII is an Equal Opportunity Employer (EEO). We consider candidates regardless of age, ancestry, color, marital status, medical condition, mental or physical disability, national origin, race, religion, political and/or third party affiliation, sex, pregnancy, sexual orientation, gender identity, military, veteran status or any other characteristic protected by law. Job type: Full-time, on-site role, based in Houston, TX office. Powered by JazzHR phi5b26Wf1

Job Description AI/ML Engineer – Time Series & Robotics Are you ready to be part of a company that's not just talking about the future, but energetically shaping it? Join the Microvast Team (NASDAQ: MVST), a technology innovator that designs, develops and manufactures lithium-ion battery solutions. Founded in 2006 and headquartered in Stafford, TX, Microvast is renowned for its cutting-edge cell technology and its vertical integration capabilities which extend from core battery chemistry (cathode, anode, electrolyte, and separator) to battery packs. By integrating the process from raw material to system assembly, Microvast has developed a family of products covering a broad breadth of market applications. More information can be found on the corporate website: www.microvast.com If you’re ready to be part of a company that’s not just adapting to change, but driving it, Microvast is the place for you. Apply now and electrify your career with a true leader in the global energy transformation. Role Summary The AI / ML Engineer will develop and deploy machine learning algorithms that analyze multi-sensor time-series data from vehicles and robotic platforms. This position focuses on building robust models that improve system performance, monitoring, and intelligent behavior, working closely with robotics, controls, and embedded teams. Key Responsibilities • Design and implement ML models for time-series sensor data (e.g., currents, torques, IMUs, joint states, vehicle signals, cameras, GPS)., • Build and maintain data pipelines for collection, preprocessing, feature extraction, and labeling., • Prototype algorithms in Python (e.g., PyTorch, TensorFlow) and collaborate with embedded engineers to create deployable, resource-efficient models., • Create production level models using C++ to improve efficiency in runtime and resource use from the Python prototype, • Evaluate model performance using appropriate metrics; iterate to improve robustness and generalization across platforms and use cases., • Work with robotics and vehicle engineers to understand requirements and convert them into concrete ML problems and model specifications., • Support data visualization, dashboards, and tools for internal users to interpret model outputs and system behavior., • Document models, experiments, datasets, and results to ensure reproducibility and traceability.Required Qualifications, • Bachelor’s, Master’s, or PhD in Computer Science, Electrical Engineering, Applied Mathematics, or a related field., • Experience with embedded / edge AI or model compression and optimization techniques., • Hands-on experience with machine learning for time-series or sensor data., • Strong proficiency in C++ and ML frameworks. Experience working with real-world noisy data (e.g., automotive, robotics, industrial, IoT). • Familiarity with data science tools and workflows (NumPy, Pandas, Jupyter, etc.)., • Ability to work in a cross-functional team and communicate technical concepts clearly.Preferred Qualifications, • Familiarity with control systems, robotics, or vehicle dynamics., • Experience with MLOps tools (experiment tracking, model versioning, CI/CD for ML)., • Experience with ROS or other multimodal sensor data frameworks, • Prior work in a product or R&D environment with multi-disciplinary teams. Expected Compensation Annual salary + benefits Pay offered may vary depending on multiple individualized factors, including market location, job-related knowledge, skills, and experience. The total compensation package for this position may also include other elements dependent on the position offered. Details of participation in these benefit plans will be provided if an employee receives an offer of employment. Applicants for employment at Microvast must be a U.S. citizen or national, U.S. permanent resident (i.e. current Green Card holder), or lawfully admitted into the U.S. as a refugee or granted asylum. Microvast is an Equal Opportunity employer. All qualified applicants will receive consideration for employment without regard to any factor, including veteran status and disability status, protected by applicable federal, state or local laws. Microvast is also committed to working with and providing reasonable accommodations to individuals with disabilities. Please let your recruiter know if you need an accommodation at any point during the interview process. Privacy is a top priority for Microvast. We build it into our products and view it as an essential part of our business. To understand more about the data we collect and process as part of your application, please view our Privacy Policy - Microvast.

Job Description METECS is seeking an entry-level Simulation Software Engineer to support NASA’s simulation efforts as part of the Robotics, Simulations, and Graphics Support (RSGS) team. This role is ideal for candidates with a strong foundation in computer science and software engineering who are interested in applying those skills to challenging problems in aerospace, robotics, human spaceflight, and physics-based simulation. In this role, you will contribute to the design, development, integration, testing, and maintenance of high-fidelity simulation software that supports engineering analysis across a wide range of human spaceflight programs, including the International Space Station (ISS), Orion, Moon Base, Space Reactor-1 Freedom (SR-1), Human Landing System (HLS), and other advanced exploration initiatives. Projects may include development and enhancement of core dynamics and simulation tools, investigations of crew member stability in lunar and microgravity environments, lunar vehicle simulations, and support of ISS training simulation systems. Successful candidates will be active contributors to a modern software development environment. Responsibilities include implementing and maintaining features from Git-managed work items, participating in peer code reviews, contributing to automated testing efforts, and helping maintain and improve continuous integration and deployment (CI/CD) pipelines. Candidates should be comfortable working within large, collaborative codebases and applying software engineering best practices to ensure reliability, maintainability, and performance. Simulation development at METECS is a highly multidisciplinary effort, requiring close collaboration with experts in software engineering, physics, robotics, biomechanics, computer graphics, and aerospace systems. You will work alongside NASA engineers and mission stakeholders to develop simulation capabilities that are accurate, robust, and relevant to real-world mission scenarios. Required Qualifications: • Bachelor’s degree in Computer Science, Aerospace Engineering, Physics, or a related field., • Experience in simulations, software development, or a related technical field., • Proficiency in C++., • Experience working in Linux-based environments., • Familiarity with Git for version control., • Strong communication skills and a collaborative mindset., • Familiarity with scripting languages such as Python., • Solid foundation in physics and mathematics., • Ability to work independently while contributing to a team-oriented environment. Desired Qualifications: • Exposure to AI/ML concepts and applications., • Understanding of the software development life cycle (SDLC)., • Experience with CI/CD pipelines and automated testing., • Familiarity with the Trick simulation framework., • Unity, Unreal Engine, EDGE or similar graphics engines. Citizenship or lawful permanent resident required due to federal position. About METECS: We are a high-performance team providing advanced engineering, software, and analysis solutions for human space flight and terrestrial applications. We develop and integrate custom software for NASA and other government and commercial customers utilizing a wide variety of in-house, commercial, and open-source technologies. Our specialties include robotics automation, embedded systems, hardware/software integration, multibody dynamics simulations, immersive computer graphics, XR systems and advanced web-based tools. METECS is an Equal Opportunity Employer, including veterans and individuals with disabilities. Powered by JazzHR WykvenszhG

Job DescriptionPurpose of the position The Product Quality Engineer is a professional who understands the principles of product and service quality evaluation and control. This body of knowledge and applied technologies include, but are not limited to, development and operation of quality control systems, application and analysis of testing and inspection procedures, the ability to use statistical methods to diagnose and correct improper quality control practices, an understanding of human factors and motivation, facility with quality cost concepts and techniques, and the knowledge and ability to develop and administer management information systems and to audit quality systems for deficiency identification and correction. This position will be responsible for the implementation, use, compliance and maintenance of quality systems and tools including the Quality Management System. Duties and Responsibilities • Define the product quality control plan and audit the implement status of quality control plan., • Works with cross-functional teams to prioritize key site projects and determine appropriate resources and timing; integrate activities using quality principles such as lean Six Sigma with Quality Management System activities such as Corrective and Preventive Action (CAPA) and Quality Improvements to assure effectiveness and compliance to customer and regulatory requirements., • Evaluates performance of current operational Quality and Quality Engineering methods (e.g., failure analysis, measurement systems analysis, process development, etc.) and drives best practices throughout the business and transfers that knowledge across the business, as appropriate., • Reports significant issues or developments identified during Quality activities and provides recommended process improvements to management., • Becomes proficient in the various business systems used at First Quality, including MES, quality data collection systems and understands how the systems are integrated with each other and within the business Education and work experience • Bachelor’s degree in Engineering discipline or a technical field with 2 years of quality or electrical manufacturing experience required., • Three or more years in quality or manufacturing engineering strongly preferred., • Highly qualified candidates would have an advanced degree in Analytics and/or ASQ CQA or CQE certification, and/or Lean or Six Sigma certification, • Experience in technical problem solving, statistical analysis, and quality auditing preferred. Supervision This role provide does not need indirect supervision/mentorship/coaching Working conditions • Office-based role, fast-paced work environment Skills: • Having 2 years working experience of product/process analysis and handling customer complaint for electronic product., • Familiar with applying quality control tools to analyze and complete quality problem report., • Good quality awareness and interpersonal communication skills., • Strong knowledge of MS-Office products and proficiency in Mini Tab, • Strong communication and coordination skills. Powered by JazzHR oemt5htRKC

Job DescriptionMain Function: • EQUIPMENT SELECTION: The Test Engineer Assistant will be responsible for specifying Machine type, expected throughput, expected yields and the required equipment manning. This will involve close liaison with the customer to understand the customer needs and requirements which may include customer specific Test Equipment and Fixtures., • EQUIPMENT PERFORMANCE: The Test Engineer Assistant will be responsible for ensuring that in a volume manufacturing environment that all manufacturing equipment performs as per supplier's specifications and within the requirements of the quotation. This is to say, that all targets can be met, that machines perform as per forecast and that yields, and quality targets are achieved., • TESTER MAINTENANCE: The Test Engineer Assistant will be responsible for all ongoing equipment maintenance which will include all planned preventative maintenance schedules, line support for breakdowns and major machine overhaul activity. The Test Engineer Assistant will also be responsible for the forecasting, stocking and ordering of spare parts and consumables required for Test Equipment and Fixtures maintenance.Duties and Responsibilities:, • EQUIPMENT SELECTION: When new products are introduced to the facility the Test Engineer Assistant will be responsible for the design of the Test Process, in conjunction with input from the Product Engineer. This will involve specifying the correct types and quantity of Testers and wherever required introducing new technologies for a customer’s specific product., • NEW PRODUCT INTRODUCTION: During the introduction of new products, the Test Engineer Assistant will have start up responsibilities to ensure that Test process operates as designed. This will include proving Throughputs and Yields and also agreeing the Manufacturing Handover process for volume production., • QUALITY: The Test Engineer Assistant will work with the Quality group to establish the Quality plans on a product-by-product basis. During the normal course of production, the Test Engineer Assistant will be required to be involved with the Quality group on an on-going basis for the resolution of Tester/ Software / Process problems that will arise., • TEAMWORK: During all of the manufacturing activities the Test Engineer Assistant will be required to co-operate with all departments within the Facility and will be required to act a pro-active team member, taking a lead role on all Test related issues., • DOCUMENTATION: The Test Engineer Assistant will be responsible for providing all process documentation and Test Programs for production build. This will include ensuring that the Test and Fixture pin out listings that are to be used in manufacturing are accurate to the current build level., • ECN ACTIVITY: The Test Engineer Assistant will be responsible for participating during the Change Control Meetings, where both internal and customer ECN’s will be actioned. Subsequent to that meeting the Test Engineer Assistant will be responsible for implementing such changes into the Test processes., • TEST EQUIPMENT: The Test Engineer Assistant will be responsible for all major Test equipment movements and installations. Also, for the negotiation and provision of all third-party service contracts for Testers used within the Facility. The Test Engineer Assistant will also be responsible for maintaining the appropriate level of spares and consumables for both Testers and Fixtures., • QUOTATIONS / TOOLING: During the quotations process the Test Engineer Assistant will be required to specify and order Test Fixtures required for the Test Process when a new customer is introduced. The Test Engineer Assistant may also be required to specify other non-recurring expenses during this process that will be required to be charged back to the customer., • MEASUREMENTS: The Test Engineer Assistant will be Measured on the following Categories:, • TEST YIELDS, • FALSE FAILURE RATE, • TEST SYSTEM UP and DOWN TIME, • ON TIME DELIVERY FULFILMENT, • SPARES INVENTORY and MaintenanceThe Test Engineer assistant will be responsible for setting up a measure process for the above that will be reported on a weekly Basis., • CUSTOMER FOCUS: The Test Engineer Assistant must recognize their importance in providing Customer Satisfaction, to both Internal and External Customers and must act to provide the best Quality Products, Services and Communication to these Customers.Qualification and Experience:, • Relevant IT education, • Strong PC and network operation and installation skills, • Windows and Linux installation and operation knowledge, • Intermediate English (written and spoken), • 1 year experience in a relevant IT field, • Strong MS office user skillPrimary Skills:, • Communication skills., • Mathematical, analytical skills., • Visual thinking., • Adaptability skills., • Independent work., • Problem solving., • Logical skills., • High Endurance.Secondary Skills:, • Relevant College or University, • Good verbal skills, • IT systems / networks, • Programming skills (SQL, JAVA, C++, PHP) Powered by JazzHR GaKSdnloL4

Job DescriptionCompany Description At Coffman Engineers, we serve as both prime consultant and sub consultant on projects large and small, including commercial, retail, institutional, government, industrial, and project/construction management. Incorporated in 1979, we have employees in more than 23 locations serving clients across the United States and overseas. To meet client objectives and to integrate our many disciplines, we can create teams comprised of civil, structural, mechanical, electrical, fire protection, and corrosion control, as well as project/construction managers and professionals in a variety of specialty services. This ability has made us a leader in the engineering and construction communities, and has strengthened our reputation as being progressive, innovative, and a great place to work. Job Description Coffman Engineers is seeking an experienced Electrical Engineer with eight to twelve years of consulting engineering experience who is passionate about delivering innovative design solutions and excited to grow with a collaborative, multidisciplinary team. In this role, you will contribute to a variety of challenging projects, support our electrical engineering group, and partner with other disciplines across the firm. Qualifications Qualifications: • Bachelor’s degree in Electrical Engineering or a related field from an accredited university, • Minimum of 8 years of relevant electrical engineering experience, • Texas Professional Engineer (PE) license in Electrical Engineering (preferred), • Engineer-in-Training (EIT) certification (required), • Knowledge of local codes and standards (preferred), • Experience with local contractors, architects, and construction practices (preferred), • Strong knowledge of electrical and lighting system design for diverse building types, • Experience with medium-voltage distribution, generation, and protection systems (preferred), • Must have SKM, ETAP, or similar electrical modeling software experience., • The focus of the experience must be in the power industry associated with electrical engineering and design of Industrial, higher education, healthcare, and/or commercial projects., • Must be familiar with electrical/energy codes and standards (NEC, IEEE, NESC, IEEE, IESNA, IECC, etc.), • Experience with lighting design (preferred), • Proficiency with AutoCAD, Revit, Bluebeam, and related design software (preferred), • Excellent written and verbal communication skills, • Ability to work independently and collaboratively on interdisciplinary teams, • Desire and capability to lead projects and coordinate across multiple disciplines, • Willingness to travel for occasional site visits, • Must be able to work in the office four(4) days a week. Additional Expectations: • Prepare electrical and lighting plans, specifications, and technical reports, • Support business development and marketing initiatives as needed, • Contribute to team mentorship, knowledge sharing, and firm-wide growth This position is not eligible for sponsorship. Additional Information Why You Want to Work Here You could choose to work anywhere, so why work at Coffman Engineers? Because we are different – our culture sets us apart. Simply stated, we are a group of creative, high-performing people who like working together and believe that what we do makes a difference. Employees say that it feels like working with a group of friends in a small office while enjoying the benefits and perks of working for a large firm. Our culture isn’t the only thing that makes us different, but it drives everything we do. Coffman offers comprehensive benefits, including a flexible PTO program and a fun environment with family-friendly policies. We support and encourage individually tailored professional and technical advancement as well as personal growth. Don't take our word for it. Check out what others are saying: http://www.glassdoor.com/Reviews/Coffman-Engineers-Reviews-E409809.htm Coffman at a Glance: • 47 years in business, • 850+ employees serving clients throughout the U.S. and overseas from more than 23 locations, • Multi-discipline engineering services plus corrosion control, commissioning and project/construction management, • 70+ employees in 9 offices, providing Fire Protection services since 2014, • #34 Top 80 Engineering Firms, Building Design + Construction, 2022, • #29 Zweig Group Hot Firm List, Zweig Group, 2021, • #161 Top 500 Design Firms, Engineering News-Record, 2023 Applying You must apply online for this position. If you are unable to complete our online application process, or if you need assistance to do so, let us know and we will provide reasonable accommodation. If you are experiencing problems applying through our system, please try using a different browser or an updated version of your current browser. If that doesn't work, please contact us directly. This position is direct with Coffman Engineers; we are an Equal Opportunity Employer. We do not discriminate on the basis of any status protected under federal, state, or local law. Follow us! www.coffman.com Twitter: @CoffmanEngineer Instagram: @CoffmanEngineers LinkedIn: https://www.linkedin.com/company/coffman-engineers Facebook: @CoffmanEngineers

Job Description The Distinguished Project Engineer will be responsible for overseeing the accuracy and timeliness of design document reviews, maintaining the technical integrity of engineering and design processes, and ensuring that all project activities align with safety regulations and quality standards. The Distinguished Project Engineer will work closely with the Engineering team to ensure that the overall design is safe, reliable, and fit for purpose. This includes participating in critical safety assessments such as HAZID, HAZOP, and LOPA, as well as reviewing process documents and project specifications to ensure compliance with industry standards and regulations. In addition to technical expertise, the Distinguished Project Engineer will be responsible for maintaining effective communication with various engineering, operational, and functional teams. They will also need to coordinate with other engineering disciplines to address multi-discipline technical issues and provide support in answering technical queries and RFIs from contractors. Primoris has a long history of consistent, reliable, power delivery and has constructed over 10GW of utility base load power (not including our equally strong renewable energy portfolio). We see tremendous growth in our non-union construction opportunities throughout the United States. Key Responsibilities: • Ensure the EPC contractor delivers process engineering work and deliverables in accordance with standards, specifications, FEED design, and contractual requirements., • Work with the Engineering team to ensure the overall design is safe, fit for purpose and will operate reliably., • Participate and provide technical expertise on HAZID, HAZOP, LOPA, and Review of MOC., • Assist with reviewing process documents, guidelines and project specifications, and follow-up on due time., • Ensure that the project is executed in accordance with the organization safety regulations, with quality conformance and within schedule., • Assist with reviewing Project philosophies, process control narratives, design specifications, and other process documents., • Ensure efficient communication with other company engineering, operational and functional team members., • Call for support from other engineering disciplines when multi-discipline technical issues arise., • Responsible for maintaining technical integrity of the engineering & design., • Answer Technical Queries and RFIs from contractors., • Participate in key design review and ensure design review readiness., • Monitors changes against baseline scope. Qualifications & Experience: • Bachelor's degree in mechanical or electrical Engineering from ABET Accredited Institution., • Minimum of 10 years of experience with simple & combined cycle power plant/data center projects., • PE license preferred., • Medium/large multi-discipline power generation project lead experience preferred., • Experience in gas turbine co-gen facilities, power island mode, gas turbines, steam turbines, heat recovery steam generators, SCR's, GSUs, coordination between power generation equipment, electrical distribution, and balance of plant system design for Power Projects., • Experience providing expertise and support for reviewing process design and engineering activities of power plant facilities., • Experience in schedule planning for various engineering phases for power plants., • Technical knowledge of all relevant codes and material specifications., • Proficient in reviewing P&IDs, Single Line Diagrams, Control Systems, Equipment Sizing, producing/reviewing process datasheets, technical evaluations of vendor packages for Combined Cycle Projects., • Good communication skills. Benefits: • Competitive compensation paid weekly, • Best-in-class; Medical, Dental, Vision, and LTD/STD, • 401(k) with company match, vested day-one, • Employee Stock Purchase Plan [ESPP], • Tuition Reimbursement, • Paid Time Off, Holiday Pay, and Community Service Paid Time Off, • Pet Coverage "For our Furry Friends", • Legal Assistance Coverage, • Award winning safety programs, • Opportunities for professional development and career advancement Company Overview: Primoris was formed in 2004 as the parent company and is traded on the NYSE under the symbol PRIM. We provide a wide range of construction, maintenance, and engineering services for power generation, oil and gas, chemical, pipeline, utilities and distribution, and civil infrastructure clients. Primoris is ranked in the top 1% of the prestigious Top 600 Specialty Contractors List by Engineering News-Record (ENR), having built projects throughout the U.S. and Canada. For additional information, please visit www.prim.com Primoris Energy Services is a major direct-hire contractor in the U.S. delivering self-performed turnkey industrial construction and EPC services. We offer these services to our clients within the refining, gas processing, chemical/petrochemical, hydrogen, power generation, mining, pulp and paper industries from the first groundbreaking activity all the way through commissioning and start-up of the project. Primoris forms a partnership with our customers and major stakeholders from early-stage engineering through construction completion and commercial operation, safely, on-time, and within budget. Third-Party Agency Notice: Primoris will not accept any unsolicited resumes from any third-party recruiting agencies either domestic or international. Primoris nor its subsidiaries will be responsible for any fees from the use of any unsolicited resumes either through our ATS or via electronic mail systems from any agency representative or agency consultant unless your firm is an approved vendor partner with a current executed agreement.

Job Description Rotating Machinery Services Inc. is seeking a MRO Buyer/Purchasing Coordinator to join our team. The primary function of the MRO Buyer / Purchasing Coordinator is to purchase requirements needed to support shop operations. Buy and route emergency requirements to jobs same day or next day. Aid RMS purchasing team and site project managers to ensure parts are available to support shop schedules. Attend weekly shop production meetings and coordinate purchasing actions. Develop and implement shop consumable programs with suppliers. Negotiate and Implement VIM hardware, machine tool automated vending for cutters, and safety supplies as well as driving cost saving opportunities. This position will also monitor open orders across Engineered to order commodities including shipments, deliveries and schedules to ensure dates are achieved. SKILLS REQUIRED ORGANIZATIONAL • Exceptional attention to detail., • Display ownership and accountability for tasks and responsibilities., • Exceptional ability to manage competing priorities. INTERPERSONAL • Excellent interpersonal and customer service skills., • Excellent verbal and written communication skills., • Ability to work independently., • Ability to work and interact professionally and respectfully with coworkers. EFFECIENCY • Ability to manage other projects and responsibilities that may be added at the company’s discretion., • Exceptional ability to multitask, prioritize, and manage time and resources effectively., • Excellent time management skills with a proven ability to meet deadlines. PRIMARY ROLE RESPONSIBILITIES • Quoting, negotiating and order placement of MRO and emergency job commodities., • Implementation of VIM system for standard hardware and shop support items., • Purchase indirect shop tooling, cutters, and consumables., • Implementation of cost saving strategies / volume discounts etc. for MRO buy., • Create and Process emergency purchase orders to support shop turnaround schedules on weekends., • Establish supplier promise dates per quoted lead-times., • Track shipments as needed., • Monitor and expedite open orders and delivery requirements in Job Boss to support PLW Houston., • Maintain current delivery dates for production in Job Boss system., • Manage yearly shop calibration orders., • Coordinate and resolve nonconforming / deviation request with quality control and engineering., • Supplier development of local supply chain to reduce lead time for support items., • Work with engineered to order commodity leaders to maintain schedules and coordinate supplier best practices., • Attend and hold open-order meetings with lead buyers for assigned commodities., • Develop and add new suppliers to RMS ASL per purchasing evaluation process., • Create and submit shipping and requests to RMS shipping receiving department to have material sent to outside services for processing., • Support Inventory validation / cycle counting and maintenance yearly (Houston), • Travel to supplier locations for order surveillance when as required by purchasing., • Other purchasing related tasks as required. ADDITIONAL RESPONSIBILITIES The above list of activities is not all inclusive but a general representation of the requirements of an RMS MRO Buyer/Purchasing Coordinator. This list is subject to change based on the needs of the company. REQUIRED EXPERIENCE & QUALIFICATIONS Experience: • Minimum of 3 years’ experience in purchasing, Materials management and planning. Experienced in procuring and managing: MRO, shop items raw Material, gaskets, O-rings, Stampings, hardware, Pipe and fittings as well as many other industrial items. Training Requirements: • Department processes, • Negotiation methods, • Job Boss use, • POC system, • Excel forms and Spreadsheets Knowledge Requirements: • Strong knowledge of purchasing in a mechanical environment for MRO, consumables, and engineer drawings, • Strong organizational, communication and computer skills required, • Must be able to read and understand Bills of materials, Specifications and Mechanical drawings., • Knowledge of Houston local suppliers for the following commodities: (tooling, cutters, consumables, raw material, metals, catalog part, hardware, seals, O-rings, pipe, fittings, flanges, gaskets as well as many other industrial items), • Understanding and coordination of emergency logistics incoming form suppliers, • Desired experience in local manufacturing, machining and fabrication., • Proficient in the use of Microsoft Excel, Word, Required, • Know how to create and review contracts, • JobBOSS is a plus. REQUIRED EDUCATION • Bachelor’s degree in business or related field is preferred., • High School Graduate. ADDITIONAL REQUIREMENTS • The position will be based full time in our Pearland Works TX facility., • Travel time expected 0-5%., • This is a full-time position, with a minimum expectation of 40+ hours per week., • Additional Hours, including evenings or weekends as required based on project needs., • This position can be required to participate in the company random or customer specific drug and alcohol screening and background check., • Ability to lift 40 lbs., • Ability to professionally handle stressful situations., • Must be able to multitask, prioritize and coordinate many job tasks daily., • Able to understand, read, write and speak English., • Able to read, interpreter, and understand technical specs, blueprints, (CAD Drawings) and BOMs., • Outgoing personality to interact with entire company and customers., • Organization skills to manage multiple deadlines and priorities., • Must possess a valid driver’s license., • Must be able to legally work in the US and provide proper documentation., • Ability to sit for long periods of times, able to reach above head, bend and stand., • Able to pass a pre-employment drug, alcohol test and background check., • Must not have allergies or issues related to handling metals including aluminum, copper, bronze, and steel. Work Environment: Office Environment on a regular basis. While performing the duties of this position, the employee may perform work in a shop environment and will be exposed to moving mechanical parts. While the work area may be described as generally clean, safe, and "not loud", there will be machining operations that generate moderate noise and metal particles. What We Offer • Competitive pay, • Paid time off and company holidays, • Medical, dental, and vision insurance, • 401(k) with company match, • Employee development and incentive programs Come lead a team where expertise, pride in craftsmanship, and customer trust define success. Learn more at www.rotatingmachinery.com and be part of something that keeps industry moving.

Job Description Here at The Exploration Company, we are developing, producing, and operating Nyx, a modular and reusable space orbital vehicle that can eventually be refuelled in orbit and that can carry cargo - and potentially humans in the longer run. Key Responsibilities: Technical Leadership Work closely with the ECLSS Principal Engineer and other Nyx Crew team members to further the development of the Nyx Crew ECLS Systems. Lead the development of ECLSS components and sub-systems from concept and requirement generation through Critical Design Review and eventual Flight Hardware delivery with the support and oversight of the ECLSS Principal Engineer. Design and develop test rigs and test objectives for components and subsystems. Vehicle Architecture Lead development, functional and risk-reduction testing for responsible components, and/or subsystems. Develop and validate analytical models to predict system behavior and inform design decisions. Conduct component trade studies and make recommendations that balance performance, cost, schedule, and risk. Program Execution Plan, coordinate, and oversee development activities to achieve technical, schedule, and budget objectives. Manage Product Lifecycle Management workflows, Bill of Materials configurations, and Interface Control Documents. Identify and mitigate technical risks, resolve anomalies, and deliver qualified flight hardware aligned with program milestones. Support the creation of detailed engineering documentation, including design reviews, test plans, test and analysis reports, and technical specifications. Team Leadership & Capability Development Provide technical mentorship to lower level engineers and technicians. Foster a culture of technical excellence, accountability, collaboration, and continuous improvement. Stakeholder, Supplier & Cross-Functional Management Lead technical interactions with suppliers, development partners, and external stakeholders, including component selection, procurement, oversight, and acceptance activities. Collaborate closely with subsystems, MAIT, and program teams to ensure successful system integration. Communicate technical status, risks, and recommendations while ensuring alignment between propulsion activities and broader vehicle development objectives. Qualifications: Bachelor's degree in Mechanical Engineering (preferred) or Aerospace Engineering. Minimum 10 years of experience in technical coordination of aerospace or spacecraft projects, from early development to qualification. Experience in design processes, including concept development, trade studies, testing, and optimization for manufacturability and reliability. Experience in developing and leading component testing campaigns, including test objective generation and test rig design and development. Experience with 3D modeling software. Experience with ECLSS systems, including pressure systems, air circulation systems, water systems and/or atmospheric monitoring & processing systems. Experience with environmental testing, such as vibration, shock, thermal vacuum, etc. Experience with ECSS and NASA standards is a plus. Familiarity with tools like GitHub and Python is a plus. Skills and Behaviors: Ability to effectively utilize oral and written communication to express technical concepts and recommendations. Ability to work effectively with cross-functional teams, suppliers, and stakeholders to ensure successful project execution. Excellent problem-solving skills and attention to detail. Strong organizing and prioritization of tasks. Positive and flexible attitude to get the job done. Demonstrates behaviors consistent with The Exploration Company’s core values of Vision, Competence, Integrity, and Passion. Why you should join us! What makes us special here at The Exploration Company and why we think you will enjoy working here is: We’re Agile - we make decisions fast whilst keeping our goals and systems in mind We’re Open and Collaborative - we are transparent about risks and obstacles, so that we can cooperate to overcome them We have a lot of Fun - we refuel our energy knowing we are democratising space. It’s a wonderful and rare opportunity, are YOU up for the challenge? We'd love to hear from you if you wish to be a part of our journey. Please submit your CV now for immediate consideration and we will be in touch shortly. The Exploration Company is an equal opportunity employer and values diversity. We do not discriminate based on race, religion, colour, national origin, gender, sexual orientation, age, marital status or disability status. Relocation assistance is provided for those willing to relocate including visa sponsorship where applicable. All offers are contingent upon the successful completion of a background check, which will be subject to the country, role, and project you applied for. By submitting your application, you acknowledge and agree that any offer of employment may be conditional upon successful condition of this check. The Exploration Company partners with Zinc Work Limited located in the UK (Zinc), a third-party provider, to ensure this process as efficient and transparent as possible. If applicable, you will receive an email from Zinc upon acceptance of your offer with a link to a secure portal where you can provide the required information to Zinc.

Job Description Job Title: Electrical Engineer PE Location: Houston, Texas Type: Direct Hire We are seeking an experienced and licensed Professional Electrical Engineer (PE) to join a growing commercial electrical contracting team. This is a full-time, in-office position responsible for electrical system design review, engineering support, project coordination, value engineering, and construction document development for commercial electrical construction projects. The ideal candidate will have a minimum of five (5) years of experience working directly with an electrical contractor and possess a strong understanding of commercial electrical systems, NEC requirements, construction practices, and estimating processes. Key Responsibilities • Lead Drafting team in completing electrical designs on schedule and budget., • Provide engineering support for commercial electrical construction projects from preconstruction through project completion., • Review and stamp electrical drawings and calculations as required., • Develop and review electrical power distribution, lighting, grounding, and low-voltage system designs., • Perform electrical load calculations, voltage drop calculations, short-circuit analysis, and coordination studies., • Assist estimating and preconstruction teams with design-build and design-assist projects., • Utilize AutoCad software to support estimating, takeoffs, and project development., • Review project plans, specifications, and contract documents for compliance and constructability., • Identify value engineering opportunities and cost-saving solutions., • Ensure designs comply with applicable codes, standards, and local regulations., • Provide technical support during project installation and commissioning phases., • Attend project meetings and collaborate with internal teams to support successful project execution.Required Qualifications, • Active Professional Engineer (PE) license in Texas or ability to obtain reciprocity., • Bachelor's degree in Electrical Engineering, • Minimum five (5) years of experience working with an electrical contractor., • Strong knowledge of commercial electrical construction methods and practices., • Thorough understanding of the National Electrical Code (NEC)., • Experience with design-build and commercial construction projects., • Proficiency with AutoCAD estimating software., • Ability to read, interpret, and review construction drawings, specifications, and contracts., • Strong analytical, problem-solving, and communication skills., • Proficiency with Microsoft Office Suite.Preferred Qualifications, • Experience with commercial electrical projects., • Familiarity with AutoCAD or similar electrical design and analysis software., • Experience supporting estimating and preconstruction departments., • Knowledge of BIM coordination processes.Compensation & Benefits, • Health, dental, and vision insurance., • Paid time off and holidays., • 401(k), • Professional development and continuing education opportunities., • PE license renewal and professional membership reimbursement. System One, and its subsidiaries including Joulé and Mountain Ltd., are leaders in delivering outsourced services and workforce solutions across North America. We help clients get work done more efficiently and economically, without compromising quality. System One not only serves as a valued partner for our clients, but we offer eligible employees health and welfare benefits coverage options including medical, dental, vision, spending accounts, life insurance, voluntary plans, as well as participation in a 401(k) plan. System One is an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex (including pregnancy, childbirth, or related medical conditions), sexual orientation, gender identity, age, national origin, disability, family care or medical leave status, genetic information, veteran status, marital status, or any other characteristic protected by applicable federal, state, or local law. #M- #LI- Ref: #209-Rowland Houston

Job DescriptionDescription: We are ERock! Enchanted Rock is a leader and innovator of Electrical Resiliency-As-A-Service. Our advanced dual-purpose microgrids protect companies, critical infrastructure, and communities from unexpected power outages, ensuring business continuity and civic durability. Enchanted Rock’s dual-purpose microgrids use natural gas and renewable natural gas (RNG) to drive the nation’s most dependable microgrids — all while producing significantly lower to zero carbon emissions than traditional diesel backup generators. Powered by GraniteEcosystem™, our revolutionary software system, Enchanted Rock solutions provide 24/7/365 monitoring, optimization, and forecasts to enable worry-free, reliable power for businesses. The Enchanted Rock solution brings together patented technologies, advanced dual-purpose microgrid designs and integrated end-to-end services. The Power is On and we keep it on. What you’ll do… We are searching for an innovative Mechanical Engineer to be part of a fast-growing organization that develops state-of-the-art generators and automatic transfer switches. This position serves as the mechanical engineering contributor to design concepts, prototype development, detailed design, product validation and support in launching products. We are a fast-paced organization and the ability to multitask within this environment successfully is important. The Mechanical Engineer will report directly to the Integration Engineering Manager and will work a hybrid schedule based out of Houston, TX. Key Responsibilities: • Contribute to the mechanical engineering team, providing technical and design input, as well as engineering and product support., • Contribute to the design, analysis, and testing of mechanical systems and components., • Participate in the development of innovative system level concepts and designs that meet project and cost targets., • Interface with suppliers and prototype vendors to obtain quotes, make design changes and execute project initiatives, as necessary., • Create and modify detailed drawings, draft conceptual models from layouts, rough sketches, or discussions., • Be creative in taking an idea and studying the details before converting it into a design., • Contribute in the definition of the project scope and deliverables that align with the project goals and strategies across the organization., • Create, update, and maintain project documentation including 3D Model, 2D drawings, product specifications, and testing requirements., • Provide engineering support to the production, quality, testing, documentation, and any other engineering rated task involving the production of Enchanted Rock Products., • Additional responsibilities may be added at the direction of the Company’s management.Requirements: Basic (Required) Qualifications: • Bachelor’s Degree in Mechanical Engineering., • Proficient in Solidworks 3D modeling and detailing drawings., • Proficient in Office 365 and related softwares., • Willing to be physically involved in all engineering tasks to meet project requirements. Preferred Qualifications: • Basic knowledge of AutoCAD 2D drafting and drawings., • Basic knowledge of Autodesk Vault 2025., • 3+ years related experience., • Knowledge of internal combustion engines and / or power generation systems. Benefits: • Medical, Dental, Vision, and Prescription Drug Insurance, • Company-Paid Life Insurance, • Flexible Spending Account (FSA), • Health Savings Account (HSA), • Wellness Programs and Incentives, • 401(k) Retirement Plan & Company Match, • Paid Time Off – Sick & Vacation Time, • Paid Holidays, • Hybrid Work Schedule, • Cool Open-Office Concept Do you have what it takes to join the Enchanted Rock team? Send us your resume today The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. Enchanted Rock is committed to creating a diverse environment and is proud to be an equal opportunity employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, gender, gender identity or expression, sexual orientation, national origin, genetics, disability, age, or veteran status. At Enchanted Rock, we embrace diversity, including all the unique characteristics that make us human: race, age, sexual orientation, gender identity, religion, disability, and education — to name a few. We understand and recognize that diverse backgrounds and perspectives strengthen our teams and our business. The foundation of our diversity efforts is closely tied to our core values specifically our value of “The Team” which includes “Mutual Respect, Openness, and Honesty.”

Job Description Purpose of the position The Server Hardware Engineer is responsible for working with the customer to develop Server/Storage Electrical specifications and design, in cooperation with the Program manager, Mechanical Engineer, Thermal Engineer, Signal Integrity Test Group, BIOS, BMC and PCB Layout teams. Other validation teams may also be involved to develop and fully test server products from early development to production phases. Must be a good team-player, capable of working across multiple function teams to ensure successful delivery of products. Duties and Responsibilities • Work with cross-functional teams (i.e. EE, BIOS, BMC, PA, SI) to Develop and deliver a successful server product to market, • Knowledge of Signal Integrity, eye diagram, transmission line and EMI in theory and in practical application, • Knowledge of Intel server MB, In-depth knowledge of x86 architecture, • Knowledge of Multi-phase VRM, high speed signal, (USB/SATA/SAS/QPI) and DDR4/DDR3 memory, • Use of Cadence OrCAD/HDL and Allegro., • Responsible for specification, design, schematics capture, layout check, BOM generation, system-level debug and test, • Drive resolution of customer reported system issues Education and work experience • MS/BS EE or CE with 0-3+ years of experience, • Experience performing schematic and layout activities independently, and have experience with PCB CAD design packages – preferably Cadence, • Ability to perform basic prototype assembly, including fine pitch soldering, • Solid grasp of the concepts surrounding Design for Manufacture, and EMC mitigation methods, • A drive to creatively seek methods for optimizing electronic designs and minimizing cost, • Must be familiar with, and able to operate, a wide range of electronic test equipment, • Knowledge of IPC standards and electronics manufacturing methods desirable, • Strong problem solving and troubleshooting skills, with the ability to evaluate the long term implications and consequences of potential solutions such as the impact to component life due to electrical or thermal stress, • Ability to work effectively both independently and as part of a team to contribute ideas and insights into project decisions, • Strong verbal and written communication skills required for sharing ideas with other departments and the customer Additional Details • Office-based role, fast-paced work environment, • Travel - Approximately 15% including international travel. A valid passport, or no restriction to obtain one, is required, • This role may require a background check to prove engineering certification. Job Type: Full-time Work Location: In person Powered by JazzHR 2xxaVBwO9b

Job Description Quaise Energy is unlocking Earth's deep heat to deliver clean, reliable, baseload energy at scale – almost anywhere in the world. As both a technology innovator and project developer, Quaise builds and operates solutions that harness superhot geothermal energy far below the surface, enabling power generation that can rival the output of today's most efficient fossil fuel and nuclear plants. Leveraging millimeter wave drilling, developed after more than a decade of research at MIT, Quaise's mission is to make superhot geothermal a backbone of the modern energy system, offering affordable, zero-carbon power and true energy independence for communities and nations everywhere. Quaise is seeking a Mechanical Engineer II to lead component-level design and development for lab-scale and field-ready mmW drilling systems. This role is intended for engineers capable of independently executing moderately complex mechanical design and testing activities while contributing across a broad range of experimental and product development efforts. The Mechanical Engineer II will own the design and analysis of components and subsystems from concept through manufacturing and testing. Working closely with cross-functional engineering, manufacturing, and testing teams, this role contributes to the rapid development and deployment of directed energy drilling systems through hands-on engineering, analysis, prototyping, and experimentation. This is a generalized engineering role with strong growth potential into specialized technical areas depending on business needs, technical aptitude, and individual interests. Essential functions (Reasonable accommodations may be made to enable individuals with disabilities to perform these essential functions.) • Lead component-level mechanical design from requirements definition through detailed drawings, release, manufacturing, and testing., • Perform tolerance stack-up analysis and apply GD&T principles to ensure fit, function, and manufacturability., • Support the design and development of testing and drilling systems for the Quaise mmW Drilling System., • Perform engineering analysis including structural analysis, thermal analysis, and fluid system evaluation to support design validation and optimization., • Utilize FEA tools to evaluate components and assemblies against expected operating conditions and loads., • Apply ASME standards and engineering best practices in component selection and mechanical system design., • Assist with CFD evaluations and flow analysis to support fluid and thermal system development., • Design, execute, and document experiments and testing activities, including Design of Experiments methodologies where appropriate., • Identify, specify, and integrate sensors, actuators, and instrumentation used in experimental and operational systems., • Develop and integrate hardware for laboratory experiments, test fixtures, and field-ready drilling systems., • Select materials and components based on thermal, structural, fatigue, and operational requirements., • Maintain organized engineering documentation including drawings, calculations, analyses, BOMs, and test records., • Collaborate with vendors and manufacturers to source custom and commercially available components., • Troubleshoot mechanical and experimental systems and support recovery efforts during testing and field operations., • Participate in technical reviews and cross-functional engineering discussions., • Perform other related duties as assigned. Competencies • Proficiency with CAD software; Creo experience preferred., • Strong understanding of GD&T, tolerance analysis, and mechanical design principles., • Experience with structural analysis tools such as ANSYS Mechanical or similar FEA platforms., • Working knowledge of fluid systems, thermal systems, and mechanical testing methodologies., • Familiarity with ASME standards related to tubing, fittings, flanges, and pressure-containing systems., • Ability to independently execute engineering tasks and manage multiple technical priorities simultaneously., • Strong analytical and problem-solving skills in experimental or fast-paced development environments., • Strong organizational skills and attention to detail, including maintaining review-ready engineering documentation., • Comfortable operating within a startup or high-growth environment with evolving priorities., • Excellent verbal and written communication skills., • Proficient with Microsoft Office Suite and familiarity with project planning tools., • Ability to interact effectively with coworkers, vendors, contractors, and cross-functional teams in both office and field environments. Supervisory responsibilities • May supervise the work of contractors to ensure work is completed in accordance with project requirements., • This role does not include formal people-management responsibilities. Education and Experience • Bachelor's degree or higher in Mechanical Engineering or related engineering discipline required (Mechanical, Aerospace, Mechatronics, Robotics, or similar)., • 2–5 years of related engineering experience in a design-focused or product development environment., • Demonstrated ability to independently execute component-level design, analysis, testing, and troubleshooting activities., • Experience working in laboratory, R&D, manufacturing, energy, aerospace, industrial, or other highly technical engineering environments preferred. Physical requirements • This role requires prolonged periods sitting at a desk and working on a computer., • The employee is regularly required to stand, sit, walk, stoop, kneel, crouch, or crawl, as well as use hands to feel, reach, grasp, handle, or operate objects, tools, and/or controls., • The employee must be able to lift, push, pull, transfer, or move items up to 50 pounds at times for departmental needs., • Ability to move between worksites or travel to various job sites and locations to complete tasks., • The vision requirement includes reviewing written and electronic materials in digital and physical format., • Ability to work safely around high voltage and high-power systems while adhering to established safety protocols and procedures., • The employee must be able to adjust to changing work hours and locations as needed in support of operational and testing activities. Other duties Please note this job description is not designed to cover or contain a comprehensive listing of activities, duties or responsibilities required of the employee for this job. Management reserves the right to change, rescind, add, or delete the duties and responsibilities of positions within this job classification at any time. Affirmative Action/EEO statement Quaise Energy is an equal opportunity employer and does not discriminate against any employee or applicant on the basis of race, color, religion, sex, national origin, genetic information, disability, military status or age.

Job Description Location: Houston, Texas Position status: FT Exempt Status: Exempt CNPC USA is actively seeking a highly skilled and motivated Mechanical Engineer to join our growing team. This is a unique opportunity for an experienced engineer with expertise in completion tool design, testing, and product support. The selected candidate will hold a senior leadership position responsible for providing strategic direction, technical oversight, and mentorship to the mechanical engineering discipline. This role will play a critical part in shaping the organization’s engineering strategies, driving innovation, and ensuring excellence in project execution. This position reports directly to the R&D Manager of Completions and Stimulations. Responsibilities: • Provide innovative and cost-effective solutions requiring development or sustaining new or improved techniques, procedures or products., • Develop new products according to customer requirements from concept study to final product qualification and support., • Assists in planning, conducting and evaluating approaches to meeting the project objectives in a timely fashion., • Produce analyses and mathematical models and draw design conclusions based on results., • Conduct or participate in technical reviews of requirements, specifications, designs, code and other artifacts., • Assign, direct and review work of others and provide guidance., • Author technical reports, papers, articles, patents and presentations., • Keep abreast of novel technical concepts and markets., • Lead system integration efforts, collaborating with internal R&D teams to incorporate existing modules with newly developed in-house technologies., • Oversee tool testing and qualification, including lab validation, environmental testing, and reliability assessments, to ensure tool readiness for field deployment., • Support field trials and initial deployments, working closely with field personnel and customers to ensure successful operation and gather performance feedback., • Drive commercialization efforts, ensuring technical readiness and documentation for market release, while supporting product training and customer onboarding., • Other duties as assigned. Qualifications: • Bachelor’s, Master’s or PhD degree in mechanical engineering or related discipline., • Proven experience in developing or engineering HPHT downhole systems, preferably with tools temperature above 200°ree;C and pressure of 10,000psi or above., • Knowledge of completion tools such as packers, safety valves, liner hangers, etc., preferred., • Detailed operational knowledge of oil and gas industry mechanical equipment and a sound knowledge of engineering, maintenance, and planning., • Legally authorized to work in the United States of America. Work Environment: This job operates in a professional office environment. This role routinely involves standard office equipment such as computers, phones, photocopiers, filing cabinets and fax machines. Physical Demands: The physical demands described here are representative of those that must be met by an employee to successfully perform the essential job functions. While performing the duties of this job, the employee is regularly required to talk or hear. This is largely a sedentary role; however, some filing and the ability to lift 20lbs and bend is required. Travel: This position requires some overnight international and domestic travel. Local travel between other CNPC USA locations and testing facilities is required. Supervisory Responsibility: This position has no direct supervisory responsibilities, however, does act as a mentor and point of contact for all mechanical design engineers. CNPC USA is an Equal Opportunity Employer (EOE). Qualified applicants are considered regardless of race, color, age, sex, sexual orientation, religion, disability, ethnicity, national origin, marital status, veteran status, or any other legally protected status. Disclaimer: The job description is not designed to cover or contain a comprehensive listing of activities, duties or responsibilities that are required of the employee. Other duties, responsibilities and activities may change or be assigned at any time with or without notice.

Job Description The Quality Engineer (BESS) serves as the primary technical authority for product excellence and reliability. You will bridge the gap between R&D and field operations, ensuring that BESS components (Batteries, Inverters, Controls) meet rigorous performance standards and "Quality by Design" principles before reaching the customer. Requirements • Quality by Design (QbD): Review product architecture and specifications to identify technical risks early in the development lifecycle; act as the "Quality Gate" for the Americas region., • Supplier Quality Engineering: Define and audit technical requirements for inverter and battery suppliers, ensuring grid-following and grid-forming capabilities meet strict reliability benchmarks., • Validation & Simulation: Oversee PSSE/PSCAD dynamic model reviews to validate that project designs will perform reliably under real-world grid conditions., • Standardization: Develop automated processes and "Gold Standard" configurations for system-level parameters to eliminate manual tuning errors and ensure consistency., • Root Cause & CAPA: Lead high-level Root Cause Analysis (RCA) and Corrective and Preventive Action (CAPA) for complex electrical failures, driving permanent engineering improvements., • Issues Triage: Serve as the front line for the quality intake systems and tasked with reducing ticket backlog and intake though the incorporation of lessons learned. Work to ensure tickets are properly assigned, prioritized, and evaluated for commercial risk. Use data analytics to review Non-Conformance Requests in the form of CAPAs, JIRAs, NCRs, and more., • Operational Excellence: Author SOPs and technical testing procedures that enable non-SMEs to execute complex tasks with zero-defect outcomes., • Due Diligence: Conduct technical audits of BMS and PCS technology solutions to ensure long-term feasibility, safety, and compatibility with existing quality frameworks. Requirements (The "Agile" / Skills) • Advanced Degree: Bachelor’s or Master’s in Electrical Engineering or similar., • Domain Expertise: 10+ years in Power Systems/Electrical Engineering with a deep focus on Quality Management Systems (QMS) or product qualification., • Power Electronics Quality: 5+ years of experience in IGBT-based inverter performance testing and failure mode analysis., • Process Engineering: Proven track record in creating engineering calculators, internal design standards, and automated testing plans for BESS or Solar PV., • Systems Integration: Expertise in Modbus TCP controls and DC/AC systems with a focus on test-driven development (TDD) or automated validation., • Regulatory Mastery: Thorough working knowledge of NFPA, UL, and IEEE codes, viewed through the lens of compliance and risk mitigation., • Travel: Ability to travel 25% or more

Job DescriptionCompany Description CRB is a leading provider of sustainable engineering, architecture, construction and consulting solutions to the global life sciences and food and beverage industries. Our more than 1,100 employees provide best-in-class solutions that drive success and positive change for our clients, our people and our communities. CRB is a privately held company with a rich history of serving clients throughout the world, consistently striving for the highest standard of technical knowledge, creativity and execution. Job Description The Process Engineer II focuses on the design of manufacturing facility and equipment, supporting facility infrastructure and critical utility systems as a part of a highly interactive team. This individual is expected to execute work on one or more intermediate level tasks simultaneously and works closely with the Lead or Senior Engineer. This individual may also delegate some basic and fundamental tasks to Entry-Level and Design staff and provides oversight to their work. The Process Engineer II is expected to support the Lead Engineer and have responsibility for defined scope of the project such as a unit operation or small area. This individual should understand the project schedule and budget and develop a work plan to support the delivery of their scope in support of those broader team goals. Core Activities • Interfaces with clients and external partners., • Develops construction drawing packages and writes construction specifications on basic projects of limited complexity with some oversight., • Supports construction activities such as RFI responses, submittal reviews, punch list development and construction progress reports., • Participates and contributes to squad checks to produce coordinated, high-quality deliverables., • Provides mentorship and guidance to Designer I to translate the engineering design into the Revit model with oversight from the Lead or Senior Engineer., • Participates in basic project system design programming with support from Lead or Senior Engineer., • Forms an understanding of the industry landscape, builds relationships with vendors and attends external industry events., • Delegates some basic and fundamental tasks to Entry-Level and Design staff and provides oversight to their work., • Supports the generation of deliverables which require more experience, deeper understanding or involve more complexity such as:, • Authoring Basis of Design Reports, • Hazardous Material Summary, • Material Balances, • Heat Transfer Calculations, • Process Simulation, • Process Descriptions, • Equipment Specifications, • Hygienic Piping Design, • Room CardsQualifications Minimum Qualifications • ABET-accredited Bachelor’s degree in a discipline-specific field, • Minimum of 3 years of experience in an operating company or design firm environment, • Proficiency in Microsoft Office, • Strong written and verbal communication skills, • Basic familiarity with applicable industry and regulatory guidance, as well as local building codes Preferred Qualifications • Fundamentals of Engineering (FE) exam registration or completion, • Proficiency in 2D/3D design platforms (e.g., AutoCAD, Revit), • Strong ability to perform or develop engineering calculations related to fluid mechanics, heat transfer, and material and energy balances, • Basic experience conducting field surveys of existing conditions and documenting and resolving field issues, • Experience coordinating across internal and external cross-disciplinary project teams, • Experience coordinating with construction trade partners, vendors, and manufacturers Additional Information All your information will be kept confidential according to EEO guidelines. CRB is committed to hiring and retaining a diverse workforce. We are proud to be an Equal Opportunity Employer and it is our policy to provide equal opportunity to all people without regard to race, color, religion, national origin, ancestry, marital status, veteran status, age, disability, pregnancy, genetic information, citizenship status, sex, sexual orientation, gender identity or any other legally protected category. Employment is contingent on background screening. CRB does not accept unsolicited resumes from search firms or agencies. Any resume submitted to any employee of CRB without a prior written search agreement will be considered unsolicited and the property of CRB. Please, no phone calls or emails. CRB offers a complete and competitive benefit package designed to meet individual and family needs. If you are unable to complete this application due to a disability, contact this employer to ask for an accommodation or an alternative application process.

Job Description Quaise Energy is unlocking Earth's deep heat to deliver clean, reliable, baseload energy at scale – almost anywhere in the world. As both a technology innovator and project developer, Quaise builds and operates solutions that harness superhot geothermal energy far below the surface, enabling power generation that can rival the output of today's most efficient fossil fuel and nuclear plants. Leveraging millimeter wave drilling, developed after more than a decade of research at MIT, Quaise's mission is to make superhot geothermal a backbone of the modern energy system, offering affordable, zero-carbon power and true energy independence for communities and nations everywhere. The Senior Controls Engineer will be responsible for control and instrumentation design, software development, solving electro-mechanical engineering challenges, and system integration for cutting-edge drilling technology. In this role you will work as an individual contributor on a team that is responsible for all work related to instrumentation, automation, and controls that will be used in the testing, development, and field deployment of a new direct energy drilling technology. As a critical member of the team, you will be responsible for developing, building, and testing both software and hardware in a fast-paced environment to accelerate the technology's path to market. A primary focus of this role will be the development and maintenance of control software, ensuring seamless system integration and performance. This position supports specialization in areas such as distributed control architectures, high-power and high-voltage interlock systems, process and flow control, real-time data acquisition, HMI design, automation safety, or system diagnostics. Additional responsibilities include maintaining a positive corporate culture, promoting a safe and creative work environment, supporting opportunities for external collaborations, and other activities designed to improve Quaise. Essential functions (Reasonable accommodations may be made to enable individuals with disabilities to perform these essential functions.) • Lead the architecture, development, and integration of complex control and instrumentation systems for prototype and field-deployed drilling platforms., • Develop, maintain, and review PLC-based control software for multi-energy-source systems and automated drilling operations. PLC platforms include WAGO and Siemens., • Evaluate, select, integrate, and troubleshoot commercially available components used for process monitoring and control such as hydraulic pumps, electric motors, VFDs, flow switches, relays, solenoid valves, IR sensors, flow meters, temperature and pressure transducers, pressure switches, etc., • Work with internal stakeholders to develop specifications and requirements for control related software features and hardware subsystems, • Design and implement robust interlock, safety, and fault-detection systems for high-power and high-voltage equipment, including gyrotrons and associated power supplies., • Design and review electrical schematics, wiring diagrams, I/O lists, and control panel layouts to support fabrication, testing, and troubleshooting., • Lead commissioning, troubleshooting, and performance optimization of integrated control systems in lab and field environments., • Define and review test plans, validation procedures, and acceptance criteria for control system functionality and reliability., • Analyze system behavior, diagnose complex faults, and drive corrective actions through software and hardware improvements., • Support supplier engagement, component specification, and technical evaluation of vendor solutions., • Prepare and review technical documentation including software architecture descriptions, control narratives, test reports, and user documentation., • Perform other related duties as assigned. Competencies • Strong analytical and problem-solving skills to identify issues and develop practical solutions., • Commitment to delivering quality results with a meticulous and conscientious approach to their responsibilities. This includes accountability for the outcomes of their tasks and showing dedication to continuous improvement and excellence in their role., • Practical engineering mindset focused on safety, reliability, maintainability, and operational robustness., • Excellent verbal and written communication skills., • Excellent organizational skills and attention to detail., • Proficient with Microsoft Office Suite or related software., • Proficient with Microsoft Project or other project planning software., • Ability to interact well with customers and co-workers, in the field and the office. Supervisory responsibilities • This role does not include formal people-management responsibilities. Education and Experience • Bachelor's degree required or Master's degree preferred in Electrical Engineering, Mechanical Engineering, or a related discipline., • 5+ years of progressive experience in controls, automation, or instrumentation roles., • Experience working in both laboratory research and industrial or field environments., • Extensive experience with PLC, DAQ systems, and instrumentation hardware selection., • Experience designing human machine interfaces., • Hands-on development, wiring, soldering, building enclosures, and troubleshooting equipment experience., • System integration experience (software, electrical, mechanical, and network)., • Experience creating and reviewing electrical schematics, wire lists, and control documentation for manufacturing and support., • Experience with electrical test equipment such as oscilloscopes, spectrum analyzers, multimeters, network analyzers., • One or more LabVIEW certifications (CLA, CLD, CLED) preferred. Physical requirements • The employee is regularly required to stand, sit, walk, stoop, kneel, crouch or crawl, as well as use hands to feel, reach, grasp, handle, or operate objects, tools and/or controls., • The employee must be able to lift, push, pull, transfer, or move items up 20 pounds at times for departmental needs., • Ability to move from one worksite to another or light travel to various job sites and locations to complete tasks., • The vision requirement includes reviewing written and electronic materials in digital and physical format, work with small electrical components, read schematics, and use a variety of test equipment. Other duties Please note this job description is not designed to cover or contain a comprehensive listing of activities, duties or responsibilities required of the employee for this job. Management reserves the right to change, rescind, add, or delete the duties and responsibilities of positions within this job classification at any time. Affirmative Action/EEO statement Quaise Energy is an equal opportunity employer and does not discriminate against any employee or applicant on the basis of race, color, religion, sex, national origin, genetic information, disability, military status or age.

Job Description Meade is a full-service design firm specializing in innovative and cost-effective engineering solutions for data centers, cloud providers, and large-scale construction projects. Our team of expert engineers, designers, and consultants is dedicated to delivering high-quality, reliable, and sustainable solutions that drive the industry forward. At Meade, we foster a collaborative and dynamic work environment where creativity, technical excellence, and professional growth are at the forefront. We take pride in our commitment to innovation, efficiency, and superior service-values that not only define our projects but also shape our workplace culture. If you're looking to be part of a company that values expertise, teamwork, and cutting-edge design, we'd love to hear from you! Job Description: Meade is seeking an accomplished Principal Electrical Engineer to lead complex electrical design efforts across a portfolio of high-profile projects. This role requires both technical depth and strategic leadership, with a focus on data centers, industrial facilities, and other large commercial developments. The Principal Electrical Engineer will serve as a technical authority, project leader, and mentor, ensuring the successful delivery of innovative, code-compliant, and cost-effective solutions. This position involves regular collaboration with Meade staff, clients, vendors, contractors, and other engineering disciplines. Key Responsibilities: • Serve as the Engineer of Record (EOR) for electrical design on major projects, setting technical direction and ensuring design excellence., • Perform and oversee complex electrical system design and calculations for power distribution, lighting, standby generation, and control systems., • Review, sign, and seal engineering drawings and specifications., • Provide quality assurance and technical oversight for submittals, RFIs, change orders, record drawings, and construction administration., • Conduct site observations, inspections, and participate in commissioning activities., • Develop and maintain technical standards, guidelines, and best practices for electrical design., • Write and edit equipment specifications, select systems and devices, and coordinate with other design disciplines., • Manage project schedules, budgets, and deliverables, ensuring technical accuracy and on-time delivery., • Mentor and provide technical guidance to junior and mid-level engineering staff., • Support business development and client engagement, including technical presentations and proposal input.Minimum Qualifications:, • 8+ years of professional electrical engineering design experience in the construction industry., • Master's degree in Electrical Engineering., • Professional Engineer (PE) license (Electrical) required and in good standing., • Demonstrated experience acting as Engineer of Record (EOR) for electrical systems., • Proven experience leading electrical design for data centers, industrial facilities, commercial buildings, or similar large-scale projects., • Strong leadership skills with proven experience managing and mentoring engineering teams., • In-depth knowledge of NFPA Standards, NEC, and international and national building codes., • Advanced expertise in power distribution, standby and emergency systems, and generator control systems., • Demonstrated experience producing Protective Device Coordination and Arc Flash studies., • Proficiency with Medium Voltage equipment selection and specification preferred., • Strategic thinker with the ability to influence technical direction and support long-range organizational goals., • Excellent communication, leadership, and presentation skills., • Proficiency with MS Office, AutoCAD, BlueBeam, BIM, and Revit. Compensation & Benefits: This position is available to candidates residing in the following states: AL, AZ, AR, FL, GA, IN, MI, MO, NV, OH, OK, SC, TX, UT, VA, WA, WV. Compensation and benefits are subject to eligibility requirements and may vary based on location and applicable laws. The pay range for this position will be provided in accordance with applicable state and local laws. Actual compensation will be determined based on factors such as skills, experience, qualifications, internal equity, geographic location, and business needs. The estimate pay ranges for this role are as follows: • Virginia: $164,000-$195,000, • Washington: $175,000-$229,000 Eligible employees may participate in Meade-sponsored benefit programs, including medical, dental, vision, life insurance, disability coverage, 401(k), paid time off, paid holidays, and other company-sponsored benefits. Benefit eligibility and offerings are subject to plan terms and applicable policies. Equal Opportunity Employer: Information submitted during the application process will be handled in accordance with applicable privacy laws. Meade provides equal employment opportunity in all aspects of employment. We do not discriminate against employees or applicants based on race, color, religion, creed, national origin, ancestry, citizenship status, sex, gender, gender identity, gender expression, sexual orientation, pregnancy (including childbirth, breastfeeding, lactation, and related medical conditions), age, disability, genetic information, marital status, military or veteran status, or any other characteristic protected by applicable federal, state, or local law. In compliance with federal law, Meade provides applicants and employees with access to the EEOC Know Your Rights: Workplace Discrimination is Illegal poster. CA Residents: SB294 Know Your Right Notice. All employment is based on qualifications, merit, and business need. If you require a reasonable accommodation due to a disability during the application process, please contact our team at recruiting@meadeengineering.com. Employment with Meade is at-will, meaning either the employee or Meade may terminate the employment relationship at any time, with or without cause or advance notice, subject to applicable law. The responsibilities listed in this job description are intended to describe the general nature of the role and are not an exhaustive list. Duties and responsibilities may change at any time with or without notice. Applicants must be legally authorized to work in the United States. Employment eligibility will be verified as required by law. Employment may be contingent upon the successful completion of background checks, drug testing, and other pre-employment requirements, permitted by applicable law. Drug-Free Workplace: Meade maintains a Drug-Free Workplace. Post-offer applicants and employees may be subject to drug and alcohol testing in accordance with applicable law, company policy, client requirements, and job-related safety considerations. Privacy Policy - Meade

Job DescriptionTitle: Mechanical Design Engineer – Remote Handling & Reactor Servicing Location: Full-Time Remote (Contiguous U.S.) Hire Type: Direct Hire Shift/Hours: Monday–Friday, standard business hours Base Salary: $110,000 – $150,000 (DOE) Benefits: Medical, Dental, Vision; PTO; 401(k); Paid Holidays; Career Growth Opportunities About the OpportunityAn advanced nuclear technology organization is seeking a Mechanical Design Engineer to support the design and development of remote handling systems, reactor servicing tools, and automated inspection equipment used during reactor refueling operations.This role focuses on mechanical handling systems, robotics/automation integration, and tooling design within a highly regulated nuclear environment. The ideal candidate will bring strong mechanical design experience, cross-functional collaboration skills, and a commitment to nuclear safety and quality standards. Job Duties• Design and develop reactor servicing tools, remote handling equipment, and inspection systems. • Prepare and review engineering calculations, drawings, specifications, and technical documentation., • Collaborate with component design, civil/structural, systems engineering, and operations teams to ensure interface and performance requirements are met., • Develop integrated handling plans and work sequences for refueling operations., • Support procurement, fabrication oversight, vendor coordination, and equipment testing activities., • Ensure compliance with nuclear quality standards (10 CFR 50 Appendix B, 10 CFR 21, NQA-1)., • Provide innovative solutions to complex mechanical design and automation challenges., • Manage technical scope, schedules, and engineering deliverables. Qualifications• B.S. in Mechanical, Electrical, or Nuclear Engineering (ABET preferred). • 5+ years of professional engineering experience in mechanical system design., • Experience designing mechanical handling equipment, tooling systems, or automated machinery., • Experience preparing and reviewing engineering calculations and design documentation., • Nuclear industry experience strongly preferred., • PE license preferred., • Must be eligible to work under DOE 10 CFR Part 810. Qualified applicants will receive consideration for employment without regard to race, color, age, religion, sex, sexual orientation, gender identity, national origin.

Job Description Space Communications Engineer Houston, TX About Intuitive Machines: Intuitive Machines is an innovative and cutting-edge space company making cislunar space accessible to both public and private customers. Our mission is to further science and exploration, communications, and economic progress from the Earth to the Moon and beyond. With multiple NASA lunar missions in development and additional private missions on our manifest, we pride ourselves in supporting NASA, our customers, and the nation in paving the way to return humans to the surface of the Moon. Our world-class team includes experts in all aspects of spacecraft subsystems design, development, and test, on-orbit operations, and safety. Responsibilities: • Design communication systems to support satellite systems in lunar orbit, deep-space, satellite, and other mission applications., • Define communication subsystem requirements andallocaterequirements across spacecraft, payload, and ground system interfaces., • Develop RF communication subsystem architectures, interfaces, and test activities including antennas, transceivers, SDRs, LNAs, SSPAs, filters, multiplexers, and related hardware., • Develop and analyze communication link budgets to ensure mission performance requirements are met., • Define and implement communication waveforms, modulation schemes, coding/FEC techniques, and synchronization methods., • Perform RF system modeling, simulation, integration, testing, and troubleshooting activities., • Conduct communication performance analyses including Eb/No, carrier-to-noise ratio, throughput, coverage, access, and link margin assessments., • Ensure communication subsystem designscomply withapplicable constraints, standards, and requirements., • Collaborate with cross-functional teams, including systems, software, avionics, GNC, payload, and ground systems engineers, to ensure successful communication system integration. Requirements: • Bachelor’s degree in Electrical Engineering, Aerospace Engineering, Physics, or a related field., • 5+ years of experience in communications or related fields., • Experience developing communication subsystem requirements andinterfacedefinitions., • Excellent problem-solving and troubleshooting skills., • Ability to work effectively in a fast-paced, collaborative environment. Preferred Skills & Experience • Experience with lunar, deep-space, or satellite communication systems., • Experience with Software Defined Radios (SDRs), optical, and/or RF communications systems, • Experience with communication analysis tools such as MATLAB, Simulink, STK,FreeFlyer, GMAT, or equivalent., • Experience with test equipment including spectrum analyzers, vector network analyzers, signal generators, and oscilloscopes., • Familiarity with government standards, CCSDS protocols, and spectrum management activities., • Experience supporting communication subsystem integration, verification, environmental testing, and mission operations. US EEO Statement: Intuitive Machines is an Equal Opportunity employer. All qualified applicants will receive consideration for employment without regard to sex, gender identity, sexual orientation, race, color, religion, national origin, disability, protected veteran status, age, or any other characteristic protected by law.

Job Description Position Overview The Sr. Mechanical Engineer will apply their professional and technical expertise to designing mechanical engineering concepts and options that align with the owner’s vision for each project. This individual should have a comprehensive understanding of the consulting engineering process and the contractual documents which are involved. Responsibilities • Determine the scope of assigned projects and utilize software programs to create the mechanical engineering designs including HVAC and other mechanical systems., • Managing all business aspects of multiple concurrent projects, review accuracy of contact documents and ensure financial targets are met while maintaining established quality standards, • Define appropriate project scope, establish budgets, cost estimates and project schedules to write proposals. Develop and follow work plans and manage the design process to the available hours in the work plan, • Act as the liaison with the customer and project staff to properly identify and process scope changes, address issues, communicate regarding project milestones, etc., • Proactively manage any possible scope of work variances to ensure client satisfaction and that projects stay on track. Respond to RFI’s and accurately review submittals, • Manage project related correspondence and documents through designated document management systems, • Perform engineering studies and design analyses to determine cost-effective system layouts, quantities/sizes, and specifications, also verify code compliance of the system designs., • Supervise and mentor select assistant project managers and project design engineers on the project team., • Preparation and layout of BIM drawings and coordination with all other disciplines at all phases of project production, including schematic design phase, design development phase, permitting phase, and construction documents phase., • Perform construction administration tasks including, but not limited to, site observations, shop drawing review, and preparation of punch lists., • Actively maintain excellent business relationships and communication with clients, partners, architects, owners, other design and construction professionals, and various code officials regarding the overall engineering project, associated assignments, and action items., • Assists in the development of proposals and presentations to clients., • Miscellaneous duties, as assigned. Qualifications • Candidates must be authorized to work in the United States and based in Houston, TX., • Bachelor’s Degree in mechanical engineering., • Seven (7) or more years of experience in mechanical engineering management and design of commercial buildings preferably in aviation, higher education, health care, hospitality, entertainment, or governmental facilities., • Licensed Professional Engineer (PE); engineering registration should be in the state(s) in which the employee resides and projects will be constructed., • Must have a thorough understanding of principles, methods and techniques of mechanical engineering, corporate and industry practices, processes and standards and their impact on project activities., • Minimum 5 years of experience leading and coordinating multi-discipline engineering teams., • Experience with a variety of project deliverable methods including design-build, design-bid-construct, fast-track and other construction delivery methods., • Knowledge of local, state, and national codes, including other aspects of laws, regulations, and potential liabilities affecting the practice of engineering., • Revit MEP proficiency required, and familiarity with other engineering software programs., • Highly proficient technical/computer skills including Microsoft O365 (Outlook, Work, Excel), internet and web applications., • Excellent communication, interpersonal, and presentation skills; ability to clearly convey information, ideas, and concepts verbally, written, or in graphic form., • Ability to prepare original specifications for project systems and components, as well as complete project manuals with sub-consultant specifications when the company serves as the prime professional., • Must have the technical knowledge and hands-on experience to effectively evaluate various mechanical engineering options for configuration of equipment and components., • Experienced with cost containment and reduction approaches and the capability of providing appropriate relative costs of different engineering approaches Skills & Competencies • Strong conflict management abilities — a good listener, committed to finding solution to problems, works to address difficulties., • Comfortable maintaining professional relationships with clients, vendors, code officials, etc. Works well with internal and external teams, promotes a positive image of the company, strives to solve issues raised by customers., • Meets deadlines, works independently or as part of a team, accountable, maintains focus on set objectives and goals., • Keeps information organized and accessible, manages time well; uses resources efficiently, strives to reduce cost., • Exceptional attention to detail and thoroughness in deliverables and communications, maintains high-quality standards and follow-up., • Ethical, honest, and accountable; maintains confidentiality, handles sensitive information with discretion and professionalism., • Has a bias for action, seeks new opportunities, strives to see projects to completion., • Monitors status of projects, thoroughly deals with project details, holds project owners accountable, delivers clear, accurate depiction of status. Physical Requirements • Must have the ability to perform the necessary job-related functions with or without reasonable accommodation., • Travel up to 10–35% for site investigations and assessments, or client meetings., • Remain in a stationary position, often standing or sitting, for prolonged periods., • Work extended hours, evenings and weekends when necessary to meet business deadlines., • Regular use of office equipment such as a computer/laptop and computer screens., • Dexterity of hands and fingers to operate a computer keyboard, mouse and other computer components., • Ability to see differences between colors, shades and brightness., • Depth perception (three-dimensional vision, ability to judge distances and spatial relationships)., • May occasionally be exposed to the following work conditions: work near/with moving mechanical parts; work near/with electrical currents; work in high places or underground; be exposed to fumes/airborne particles or caustic chemicals; withstand outdoor weather conditions; withstand moderate to very loud noises. Benefits & Perks • Competitive compensation and benefits package, • Flexible hybrid work options, • Flexible Time Off, • Generous paid holiday schedule, • Paid Parental Leave, • 401k plan with company match, • Employee perks and discounts, • Education assistance & professional development, • Opportunity to work on impactful, headline-making projects that positively impact local and national communities Who We Are VoltAir, Inc, founded in 2006, is an engineering firm that provides Mechanical, Electrical, Plumbing, Fire Protection, and Information Technology design and commissioning services. Our projects span aviation, office, restaurant, retail, higher education, parking, K-12, multi-family, healthcare, labs, recreational facilities and central energy plants. We are a certified minority-owned corporation and employ approximately 60 professionals. We are headquartered in Tampa, Florida, with additional locations in Orlando and Fort Lauderdale, Florida; Houston, Dallas/Ft. Worth, Texas; Nashville, Tennessee; and Atlanta, Georgia. Equal Employment Opportunity VoltAir does not discriminate in recruitment, hiring, training, promotion, or other employment policies on the basis of any protected characteristics. All qualified applicants will receive consideration for employment without regard to age, race or color, religion, sex or sexual orientation, gender identity or expression, national origin, physical or mental disability status, pregnancy status, genetics, protected veteran status, or any other characteristic as protected by applicable federal, state, or local law. In addition, we make reasonable accommodation to the needs of disabled applicants and employees, so long as this does not create an undue hardship on the business or threaten the health or safety of others at work. If you need assistance in completing this application, notify hr@voltairinc.com.

Job Description Who We Are Atwell, LLC is a bold leader in the consulting, engineering, and construction services industry, delivering a broad range of creative solutions to clients in the real estate & land development, and energy markets. We have a strong national presence and a diverse, award-winning project portfolio. Atwell is a privately owned company, with 2,000+ passionate team members across 75+ locations and growing! Atwell, LLC is a proud recipient of the following 2025 awards: • Ten consecutive years in a row as a "Best Place to Work" by Zweig Group (#11), • Recognized as #70 in the ENR Top 500 Design Firms, ranked in every region, • Recognized in Crain's "Fast 50" as one of the fastest-growing companies (#14), • Recognized as the 2025 ENR Design Firm of the year for the Southeastern US Position Snapshot Atwell is hiring an Electrical & Instrumentation Engineer with oil and gas experience to support natural gas, CO₂, hydrogen, RNG, and midstream pipeline/facility projects. This role will focus on electrical power distribution, instrumentation, controls coordination, equipment specification, and construction support for pipeline and facility projects. You'll support E&I engineering from concept through design, procurement, construction, and commissioning while coordinating with multi-discipline project teams to ensure safe, compliant, practical, and constructible designs. Essential Functions • Lead and support electrical and instrumentation engineering tasks for oil and gas pipeline and facility projects., • Provide technical guidance to designers, engineers, and project teams while reviewing and implementing client-requested design changes., • Serve as a technical liaison with clients, EPC partners, vendors, internal teams, and construction personnel., • Support project execution by communicating scope, schedule, technical requirements, risks, and design changes., • Mentor junior engineers and designers while promoting collaboration across civil, mechanical, structural, process, controls, and survey teams., • Maintain and apply E&I best practices, industry standards, client requirements, and Atwell design procedures., • Travel to client sites, Atwell offices, vendor facilities, and active jobsites as needed. Education • Bachelor's degree in Electrical Engineering or a related engineering discipline., • Professional Engineer license preferred, or ability to obtain based on state and project requirements., • Oil and gas, midstream, pipeline, industrial, or facility engineering experience strongly preferred. Day to Day • Act as an E&I engineering resource for pipeline and facility projects, including compressor stations, meter and regulator stations, terminals, valve sites, pump stations, and related midstream facilities., • Develop and review electrical and instrumentation design deliverables, including one-lines, load lists, cable and conduit schedules, grounding plans, area classification, lighting, heat trace, I/O lists, loop drawings, and instrument location plans., • Coordinate with process and mechanical teams on P&IDs, equipment layouts, instrumentation requirements, control narratives, and package equipment interfaces., • Prepare and review equipment specifications and data sheets for switchgear, MCCs, transformers, panels, VFDs, generators, UPS systems, instrumentation, analyzers, PLC/RTU panels, SCADA, telecom, and related E&I equipment., • Perform or review electrical studies such as short circuit, protective device coordination, arc flash, voltage drop, motor starting, cable sizing, and grounding calculations using SKM, ETAP, or similar software., • Support procurement through RFP packages, vendor bid evaluations, technical clarifications, equipment reviews, and coordination with suppliers., • Provide construction and commissioning support, including RFIs, submittal reviews, FAT/SAT support, punch lists, startup planning, energization support, and field issue resolution., • Review project deliverables for compliance with applicable codes, client standards, company procedures, and project requirements., • Coordinate with internal teams including Development, Engineering, Permitting, GIS, Land, Survey, and Construction to support project scope, schedule, and budget., • Maintain organized calculations, design files, QA/QC documentation, change logs, and project records. Preferred Tools & Experience • Experience with SKM Power Tools, ETAP, or similar electrical analysis software., • Experience with AutoCAD, AutoCAD Electrical, Bluebeam, Microsoft Office, and related design/documentation tools., • Familiarity with PLC/RTU systems, SCADA, telecom, control panels, instrumentation, and control system integration., • Experience supporting electrical and instrumentation design for compressor stations, meter stations, pump stations, terminals, valve sites, pipeline facilities, or industrial facilities., • Field experience supporting installation, testing, troubleshooting, commissioning, and startup in operating facilities., • Consulting, EPC, or owner/operator experience within oil and gas, midstream, hydrogen, CO₂, RNG, or industrial energy projects preferred. Pay Range - $115,000 - $155,000 base, + bonus, + benefits. Disclaimer While AI tools may support your application process, this role is built on human talent. Your judgment, experience, and character matter most, so we encourage you to showcase what makes you uniquely you. Atwell does not accept unsolicited resumes from any 3rd party agencies. No fee will be paid to 3rd parties who submit unsolicited resumes to any Atwell employee. Resumes from approved vendors must be specifically requested by Atwell and approved by the Atwell Talent Acquisition Team. #LI-TK1 Atwell Benefits: To attract and retain the best professionals in the industry, we aim to provide an excellent working environment and a progressive benefits program designed to support your personal and professional needs. Work/Life: • Generous Paid Time Off, • Paid Parental Leave, • Flexible work schedules are available for some positions, • Tenure Awards — Travel Vouchers to see the world based on your travel preferences Compensation: • Competitive Compensation packages, • Annual bonuses, spot bonuses and peer recognition awards, • 401K match - 1:1 up to 4% of compensation, • Tuition Assistance, • Student Loan Repayment, • Paid Licensing / Certification Fees and Renewals, • Financial Rewards for Obtaining Licensure, • Employee Referrals, • Annual Wellness Reimbursement for anything wellness related (Gym memberships, fitness tracker, home gym equipment, etc.), • Dependent Care Match 'Atwell'ness: • Medical (BC/BS), Dental (Delta), and Vision (VSP), • Family Planning & IVF Benefits, • Pet Insurance, • Health Savings Account & Flex Spending Account options, • Employer paid LTD, STD, and life insurance, • Metlife Supplemental Benefits covering accident, hospitalization, and critical illness, • Member Assistance Program (MAP) with complimentary counseling sessions, legal benefits, financial consultations, and work/life referral services

Job Description At E Tech Group, joining our team means joining a group of passionate and forward-thinking experts. We're one of the largest engineering and system integration firms in the United States providing value for our clients through IT automation and control solutions for more than 30 years to the Life Sciences, Mission Critical, Metals & Mining, Warehousing & Distribution, and CPG/Food & Beverage industries. Our national and global scale allows us to help our clients develop and implement standardized solutions at any of their facilities regardless of physical location or the local resources available at that site. We are seeking a Senior DCS/PLC Engineer to be responsible for leading or contributing to detailed hardware and software design of process automation control systems projects. This includes defining architecture requirements, developing detailed software design specifications, programming PLC and SCADA applications, configuring thin client server applications, configuring process-based historian databases, tuning control loops, providing control system startup and commissioning services, troubleshooting existing control systems and providing control system qualifications. This a fantastic opportunity to lead/work on projects from concept through commissioning phases. You will: • Provide application/control systems design and development for systems of varying complexity, • Develop and evaluate alternative system solutions that meet stated requirements, • Modifies program/system logic involving multiple systems and subsystems, • Develop proficiency in several programming languages and control device networks for PLCs, PCs, • Interact with customers to gain an understanding of the business environment. Defines scope, plans, and deliverables for assigned work, • Work successfully in a team environment; focused strongly on customer service and continuous improvement, • Have the ability to travel 20%, • Be an ambassador who embodies our Core Values, prioritizing the success of E Tech Group, our clients, and the professional development of our associates. You have: • Bachelor's Degree in Engineering or related Engineering fields., • 5+ years of experience, or equivalent combination of education, • Consulting experience, • Proficiency in troubleshooting control systems and an understanding of process controls, • Delta V experience, • Rockwell experience with products such as: ControlLogix, CompactLogix, PlantPAx, Factory Talk Software Suite, Studio 5000, PLC5, SLC500, RSView, PanelView Plus, etc., • Other PLC platform experience (GE, Siemens, Modicon), • Other SCADA and HMI package experience (Proficy and Wonderware), • Experience implementing detailed control system electrical design packages, • Working knowledge of control system networks (Ethernet, ControlNet, DeviceNet, etc.), • Understanding of Biopharmaceutical processes, GMP and validation, • Knowledge of S88 Batch standards and experience implementing batch systems, • Instrumentation experience, • Excellent written and verbal communication skills, • A DNA comprised of collaboration and teamwork. Benefits & Perks: • 401k + match + prompt enrollment. E Tech Group employees are 100% vested upon entry., • Prompt enrollment into Medical, Dental, and Vision benefits., • Generous paid time off that includes paid vacation, paid holidays, paid family leave and sick time off., • Learning and growth are key parts of the E Tech culture. We provide you with training and continuing education from day one, so you can advance your career. As an E Tech associate, you can unlock your greatest potential through challenges and opportunities. E Tech Group is an Equal Opportunity Employer. Applicants are considered for employment without regard to race, color, religion, sex, age, disability, military status, genetic information, gender identity, sexual orientation, citizenship status, or any other basis prohibited by law. E Tech Group will provide reasonable accommodations to qualified individuals with disabilities and for religious beliefs. E Tech Group is an Affirmative Action Employer of individuals with disabilities and protected veterans.

Job Description Position: Thermal Engineer – Server R&D Team We are seeking a highly skilled Thermal Engineer specializing in thermal management design for server and rack products. This role involves developing thermal solutions from concept to mass production, utilizing advanced simulation and testing techniques to ensure product performance and reliability. Key Responsibilities: • Lead thermal management design for server and rack systems, including chip, board, system, and rack-level thermal solutions., • Conduct thermal simulation and optimization using advanced tools such as FloTherm, Icepak, and Ansys CFD., • Plan and execute thermal tests, including operating environmental chambers to validate design performance and reliability., • Analyze and optimize airflow management systems and design efficient cooling solutions, such as liquid cooling or hybrid cooling technologies., • Collaborate with cross-functional teams (mechanical design, electrical design, and manufacturing) and customers to ensure designs meet thermal performance, production requirements, and client-specific needs., • Actively participate in customer technical review meetings, provide design recommendations, and resolve technical issues promptly., • Build strong client relationships by working closely with customers to refine technical solutions and ensure alignment with their expectations., • Review and evaluate new technologies and materials to ensure thermal design meets industry trends and future needs., • Prepare detailed test reports and technical documentation to support internal and customer design reviews., • Work closely with Taipei and other global R&D centers, requiring strong communication skills in English and MandarinQualifications:, • Bachelor’s or Master’s degree in Mechanical Engineering, Thermal Engineering, or Aerospace Engineering. A Ph.D. is a plus., • At least 5 years of experience in thermal design for servers and racks, with familiarity with cloud computing and data center requirements., • Deep understanding of thermodynamics, heat transfer, and fluid dynamics, with practical application in design and testing., • Expertise in thermal simulation tools (e.g., FloTherm, Icepak, Ansys CFD) and 3D/2D CAD tools (e.g., PTC Creo, SolidWorks, UG NX)., • Hands-on experience with server thermal testing equipment, including environmental chambers and airflow measurement devices., • Ability to develop and optimize liquid cooling solutions and a strong understanding of hybrid cooling technologies., • Familiarity with fan module design and airflow control techniques., • Excellent analytical and problem-solving skills, with the ability to perform trade-off analysis and evaluate multiple design options efficiently., • Strong cross-functional and customer communication skills, with fluency in English required; Mandarin proficiency preferred., • Familiarity with Product Data Management (PDM) systems such as Windchill and experience with Agile Development processes. Additional Advantages: • Familiarity with rack server design specifications and data center operational requirements., • Experience in developing products for hyperscale data centers is highly desirable., • Deep knowledge of industry thermal standards, such as ASHRAE TC 9.9, and the ability to apply them in product design. Powered by JazzHR Tepnn39eXo

Job Description Propulsion Systems Lead – IM-5 (Nova-D) Houston, TX About Intuitive Machines: Intuitive Machines is an innovative and cutting-edge space company making cislunar space accessible to both public and private customers. Our mission is to further science and exploration, communications, and economic progress from the Earth to the Moon and beyond. With multiple NASA lunar missions in development and additional private missions on our manifest, we pride ourselves in supporting NASA, our customers, and the nation in paving the way to return humans to the surface of the Moon. Our world-class team includes experts in all aspects of spacecraft subsystems design, development, and test, on-orbit operations, and safety. About the Position: We are seeking a Propulsion Systems Lead to support the development, integration, test, and operation of the IM-5 mission, the first mission utilizing Intuitive Machines' Nova-D lunar lander platform. This requisition may be filled at various engineering levels depending on experience, demonstrated capability, and scope of ownership. Candidates with Senior, Staff, Principal, Lead Engineer, or equivalent experience are encouraged to apply. Awarded through NASA's Commercial Lunar Payload Services (CLPS) initiative, IM-5 expands Intuitive Machines' lunar surface operations and represents a significant step toward sustained lunar exploration. Nova-D is Intuitive Machines' next-generation lunar lander platform, designed to deliver larger payloads, infrastructure, and mission capabilities to the lunar surface in support of NASA's Artemis objectives and future commercial lunar activities. As Propulsion Systems Lead, you will serve as the technical owner for the propulsion subsystem, guiding system development from requirements definition through design, fabrication, integration, test, launch, and mission operations. This role offers the opportunity to directly influence a flagship lunar mission and play a critical role in advancing humanity's return to the Moon. Responsibilities: • Serve as technical owner and primary focal point for the IM-5 propulsion subsystem., • Lead propulsion subsystem definition, design, integration, verification, qualification, acceptance, and mission operations activities., • Define propulsion system requirements, maintain interface definitions, and ensure verification closure throughout the program lifecycle., • Coordinate propulsion activities across systems engineering, structures, avionics, software, manufacturing, integration, test, safety, and mission operations teams., • Manage propulsion-related technical risks, action items, discrepancies, and anomaly investigations through closure., • Develop and maintain propulsion subsystem schedules, priorities, and deliverables in coordination with program leadership., • Oversee supplier selection, procurement support, technical oversight, and qualification activities for propulsion hardware., • Lead component- and system-level test planning, execution, data review, and verification activities., • Review and guide propulsion analyses including fluid system modeling, thermal-fluid analyses, performance predictions, transient simulations, and system-level studies., • Utilize tools such as Jira, Microsoft Project, Confluence, or equivalent systems to track technical actions, schedules, requirements, and execution status., • Provide technical leadership and coordination across propulsion, systems engineering, manufacturing, integration, test, and mission operations teams., • Mentor engineers and contribute to the continued growth of propulsion capabilities across Intuitive Machines programs. Requirements: • BS or MS in Mechanical, Aerospace, or related Engineering discipline from an accredited institution., • Demonstrated ownership of propulsion hardware, subsystems, or other complex aerospace technical scope through significant phases of a development program., • Strong understanding of propulsion system fundamentals, fluid mechanics, thermodynamics, spacecraft fluid systems, and propulsion integration., • Experience developing, integrating, testing, or operating propulsion or fluid systems utilizing cryogenic propellants., • Experience supporting hardware through design, fabrication, integration, qualification, acceptance, launch, and operational phases., • Experience leading multidisciplinary technical efforts and coordinating activities across engineering organizations., • Experience managing technical schedules, priorities, and deliverables in a fast-paced development environment., • Familiarity with Jira, Microsoft Project, Confluence, or similar project management and issue-tracking tools., • Strong technical communication, technical writing, and presentation skills., • Ability to work effectively in a collaborative, cross-disciplinary engineering environment., • Strong organizational skills and ability to manage multiple parallel tasks., • Alignment with Intuitive Machines' core values: Respect, Integrity, Dedication, and Excellence.Preferred / Differentiating Experience, • Experience with lunar landers, spacecraft propulsion systems, launch vehicles, or other aerospace flight hardware., • Experience serving as propulsion lead, subsystem lead, responsible engineer, or technical lead on spacecraft development programs., • Experience with methane, oxygen, hydrogen, or other cryogenic propulsion systems., • Experience developing and validating propulsion system, fluid network, thermal-fluid, or performance models using tools such as GFSSP, Easy5, SINDA/FLUINT, Thermal Desktop, ANSYS Fluent, or equivalent engineering software., • Experience supporting launch campaigns, mission operations, or planetary exploration missions., • Familiarity with NASA programs, CLPS missions, Artemis objectives, or commercial lunar development efforts. US EEO Statement: Intuitive Machines is an Equal Opportunity employer. All qualified applicants will receive consideration for employment without regard to sex, gender identity, sexual orientation, race, color, religion, national origin, disability, protected veteran status, age, or any other characteristic protected by law.

Job DescriptionDescription: We are ERock! ERock is a leader and innovator of Electrical Resiliency-As-A-Service. Our advanced dual-purpose microgrids protect companies, critical infrastructure, and communities from unexpected power outages, ensuring business continuity and civic durability. ERock’s dual-purpose microgrids use natural gas and renewable natural gas (RNG) to drive the nation’s most dependable microgrids — all while producing significantly lower to zero carbon emissions than traditional diesel backup generators. Powered by GraniteEcosystem™, our revolutionary software system, ERock solutions provide 24/7/365 monitoring, optimization, and forecasts to enable worry-free, reliable power for businesses. The ERock solution brings together patented technologies, advanced dual-purpose microgrid designs and integrated end-to-end services. The Power is On and we keep it on. What you’ll do… We are looking to hire a detailed-oriented, driven, and resourceful electrical engineer to assume Design Engineering responsibilities for multiple (microgrid reliability as a service) Engineering, Procurement, and Construction (EPC) projects. The successful candidate will have a proven track record of performing project and electrical engineering work - mechanical engineering experience is a plus. The position will report to the Director of Microgrid Engineering and will work a hybrid schedule based out of our headquarters in downtown Houston, TX. Key Responsibilities: Project Engineering Coordination: • Coordinate technical aspects of the project., • Coordinate with electric utility companies for distributed generation service request and commissioning for the assigned projects., • Coordinate with clients, vendors, stakeholders, and other disciplines in support of project completion., • Assist the Project team in meeting project goals including, but not limited to schedule, budget, safety, and overall quality., • Assist / guide Designers and junior Engineers in technical aspects of their work., • Identify, analyze, and manage technical risk on projects under direction of the Project Manager., • Provide engineering support, as needed, during the sales phase of the projects., • Conduct condition assessments of existing electrical systems., • Conduct site visits as necessary. Project Design Packages and Applications: • Prepare, check and review detailed point-to-point project design packages for scope, completeness, constructability and quality., • Ability to create Project Design Packages including but not limited to one-line & layout drawings, electrical schematics, bills of material, and procedures (in accordance with applicable codes) with minimal supervision., • Create/Review equipment and material (i.e. switchgear, transformers, wire/cables, etc.) technical specifications for procurement and ensure they meet/exceed compliance with all project requirements and applicable codes., • Prepare Interconnect applications., • Supervise, review, and approve the work of third-party engineers and designers., • Create and maintain project specific documentation prior to, during, and following completion of the projects., • Create as-built design drawings. Power System Studies: • Demonstrate the ability to do AutoCAD drawings and Power System modeling on ETAP., • Perform Load Flow, Short Circuit, Protection Coordination and Arc Flash studies., • Create relay protection setting .rdb files.Requirements: Required Qualifications: • Bachelor’s Degree in Electrical/ Power systems engineering., • 10+ years of combined experience in Electrical and Project Engineering., • Have good theoretical background of MV & LV electrical power distribution, MV & LV Switchgear, Transformers, power generators, grounding systems, cable installation, and power systems studies., • Physical requirements and working conditions: Must possess mobility to work in a standard office setting including performing occasional site visits and to use standard office equipment, including a computer, stamina to maintain attention to detail despite interruptions, strength to lift and carry [files weighing up to 20 pounds]; vision to read printed materials and a computer screen, and hearing and speech to communicate in person and over the telephone. Preferred : • Demonstrate a good understanding of NEC, ANSI/NEMA and IEEE standards for the above., • Have Power, Controls, and Utility systems experience., • Have strong computer skills and proficiency with MS Office products (Project, Outlook, Word, Excel & Power Point) & various pdf editing/mark up software., • Have the ability to multi-task and handle multiple projects., • Have effective written and oral communications., • Have the ability to work in a team environment and coordinate with other areas to achieve goals and objectives., • Have the ability to effectively manage time and complete projects on a timely basis., • Have the ability to develop a good understanding of Company standards, practices and procedures pertaining to engineering and design., • Work with minimum supervision, be a self-starter, be able to meet goals and deadlines on own initiative., • Be self-motivated and able to maintain deadlines of assigned project deliverables, via reports from project management scheduling software., • Can develop a good understanding of Company standards, practices and procedures pertaining to engineering and design., • Have the ability to drive all technical aspects of a project from cradle-to-grave with minimal supervision., • Have the ability to draft effectively & efficiently in AutoCAD, is highly preferred. Your Rewards! • Medical, Dental, Vision, and Prescription Drug Insurance, • Company-Paid Life Insurance, • Disability Insurance, • Paid Family Leave, • Flexible Spending Account (FSA), • Health Savings Account (HSA), • Wellness Programs and Incentives, • 401(k) Retirement Plan & Company Match, • Paid Time Off – Sick & Vacation Time, • Paid Holidays, • Hybrid Work Schedule!, • Cool Open-Office Concept Do you have what it takes to join the ERock team? Send us your resume today. Be yourself and keep it useful, funny, and cool! The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. ERock is committed to creating a diverse environment and is proud to be an equal opportunity employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, gender, gender identity or expression, sexual orientation, national origin, genetics, disability, age, or veteran status. At ERock, we embrace diversity, including all the unique characteristics that make us human: race, age, sexual orientation, gender identity, religion, disability, and education — to name a few. We understand and recognize that diverse backgrounds and perspectives strengthen our teams and our business. The foundation of our diversity efforts is closely tied to our core values specifically our value of “The Team” which includes “Mutual Respect, Openness, and Honesty.”

Job DescriptionWho We Are:Venus Aerospace is revolutionizing rocket engine propulsion. With the first generational leap in rocket engine technology since Apollo, our proprietary Rotating Detonation Rocket Engine and Venus Detonation Ramjets deliver historic efficiency and performance across aerospace applications. We are building the next generation of propulsion platforms that enable breakthrough capabilities in space, defense, and commercial high-speed flight. Our team thrives on solving the toughest engineering challenges and pushing the boundaries of what’s possible in aerospace. At Venus, we’re looking for bold engineers and innovators who want to make history and redefine the future of propulsion. The Role: Instrumentation EngineerThe Instrumentation Engineer is a self-motivated, proactive professional who thrives in a fast-paced environment and communicates effectively across disciplines. This role requires a strong foundation in electrical engineering and instrumentation and offers a unique opportunity to make an immediate and meaningful impact on next-generation aerospace systems. If you are passionate about designing measurement systems for high-energy, one-of-a-kind hardware, you will join a highly experienced team whose background spans large aerospace companies, chemical plants, government organizations, and hands-on engineering environments—united by a culture of ownership, innovation, and technical excellence.What You’ll Get to Do • Own the design, analysis, development, integration, and maintenance of test department electrical and instrumentation systems used across a wide range of applications., • Play a critical role on a multidisciplinary team responsible for defining how complex aerospace hardware is instrumented, measured, and validated., • Select, integrate, and validate sensors for low-speed and high-speed data acquisition systems, • Perform signal conditioning, including excitation, amplification, filtering, isolation, and scaling of raw sensor outputs, • Verify correct sensor operation through power checks, continuity, polarity, and calibration, • Design and fabricate wiring harnesses and instrumentation interfaces, • Integrate instrumentation with mechanical, fluid, inert gas, and cryogenic systems, • Develop robust test setups for large- and small-scale hardware, • Generate and revise electrical and instrumentation schematics for test stands, • Modify existing structures to meet testing requirements, • Generate test procedures for new systems and calibration of existing systems, • Review test data to identify issues, anomalies, and trends, • Support grounding, shielding, and EMI mitigation efforts, • Install, wire, and troubleshoot test instrumentation systems, • Communicate with the Software team to support automated testing and analysis, • Support commissioning and maintenance of test infrastructure and equipment, • Perform additional tasks as needed to support test and development operationsWhat You Have, • Bachelor’s degree in Electrical, Mechanical, Aerospace Engineering, or equivalent hands-on test experience (In absence of a degree, 7+ years of relevant experience), • 3+ years of experience in instrumentation, controls, or test engineering, • Hands-on experience with signal conditioning and data acquisition systems, • Strong understanding of the following: Measurement uncertainty and sampling theory; Filtering, noise, grounding, and EMI; Sensor selection and integration, • Solid understanding of sensor signal types and wiring, including: Voltage, mV, differential voltage, and 4–20 mA outputs; Bridge-based sensors; IEPE / charge accelerometers; Digital I/O and low/high-side switching; Thermocouples and RTDs; Pulse and frequency signals, • Practical experience installing and troubleshooting: Pressure and differential pressure transducers; Thermocouples and RTDs; High-speed accelerometers; Load cells and strain-gauge sensors; Flowmeters; Mechanical limit switches; Solenoid valves; Power supplies; NI PXI, cDAQ, and cRIO systems; VFDs, • Tools & Equipment Experience: Power supplies; Digital multimeters and signal generators; Oscilloscopes; Crimp tools and precision cutting tools; Soldering and rework equipment; Heat guns and strain relief tools; Torque tools for sensor installation; Labeling and harness management tools, • Comfort working in a fast-paced, hardware-focused environment, • Excellent organizational skills, coupled with strong analytical and problem-solving abilities, and the demonstrated capacity to work both independently and collaboratively within cross-functional teams, • Willingness and ability to work outdoors in support of testing and fabrication activities; safely lift and transport up to 40 pounds; and adapt to evolving test, development, and operational requirementsWhat Will Set You Apart, • Experience in aerospace, propulsion testing, or flight test, • Familiarity with LabVIEW, MATLAB, Python, DIAdem, • Familiarity with Confluence, Jira, and Microsoft Office Suite, • Experience with high-speed or transient data acquisition, • Experience operating in cryogenic or high-temperature environments, • Background supporting hazardous test operations, • Strong cross-functional communication during live test operations, • 3+ years of experience with CAD modeling software, • 3+ years of experience in hardware testing environments, • 3+ years of experience with fluid and/or mechanical system designLocation:On-site in Houston, TX Benefits:Venus Aerospace employee benefits include a 401(k) plan, stock options, and medical benefits, including dental and vision. We have a flex-Friday flexible schedule, unlimited PTO, and receive professional development opportunities. ITAR RequirementsThis position involves access to technology that is subject to U.S. export controls. Any job offer made will be contingent upon the applicant’s capacity to serve in compliance with U.S. export controls. To conform to U.S. Government space technology export regulations, including the International Traffic in Arms Regulations (ITAR) you must be able to meet ITAR requirements (U.S. citizen, lawful permanent resident of the U.S., protected individual as defined by 8 U.S.C. 1324b(a)(3), or eligible to obtain the required authorizations from the U.S. Department of State). You can learn more about ITAR here. Venus Aerospace is an Equal Opportunity Employer including Disabled/Veterans. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, or protected veteran status and will not be discriminated against on the basis of disability. If you have a disability and believe you need a reasonable accommodation, please email careerassistance@venusaero.com or call (281) 203-0027.This email and phone number were created exclusively to assist job seekers whose disability prevents them from being able to apply online. Messages or any other purposes, such as following up on an application, third party staffing agencies, website technical issues, or any other issues not related to a disability, will not receive a response. Messages will be returned within five business days. For additional information about our Equal Opportunity Employment Policy, please visit our EEOP page. We may use artificial intelligence (AI) tools to support parts of the hiring process, such as reviewing applications, analyzing resumes, or assessing responses and identifying potential inconsistencies or verification signals in application materials based on available information. These tools assist our recruitment team but do not replace human judgment. Final hiring decisions are ultimately made by humans. If you would like more information about how your data is processed, please contact us.