System operator jobs in Westfield, New JerseyCreate job alerts

Job Description Job Title: Maintenance Technician / Boiler Operator Schedule: Full Time, 40 hours per week; Daytime - Monday to Friday – 8 AM-4:00 PM and emergent night/weekend hours required. Essential Functions Under direction of the Property Manager, the candidate will perform varied simple and moderately physically strenuous tasks involved in cleaning and maintaining the Association buildings and grounds. The candidate will also run, maintain, and turn off the boiler system. The candidate will assist in making general repairs and maintenance to buildings and/or equipment and other related duties as required. The examples of duties and responsibilities below are intended to describe the general nature and level of work to be performed by individuals in this position, rather than an extensive list. · Run the boiler system during required month of operation · Light plumbing and electrical work (such as bleeding radiators, changing smoke detectors, changing light fixtures) · Assist in making repairs to buildings or equipment. · Ability to perform basic painting · Ability to perform basic carpentry work · Perform varied simple and moderately physically strenuous tasks involved in cleaning and maintaining offices, bathrooms, buildings, and grounds. · When necessary, carry & set up ladders, work from ladders, or work on the roof. · Dispose of trash, recycling, and other materials to keep space safe. · Perform additional salting of walkways to supplement vendor during Winter season. · When assigned, move objects weighing about 50 pounds. · Other duties, as assigned. Knowledge, Skills, and Abilities · Knowledge about boiler systems and their fueling, firing, maintenance, & repairs. · Knowledge about fire & building maintenance and repairs. · Ability to work collaboratively with co-workers and a diverse & varied resident base. · Ability to undertake repairs and maintain equipment. Qualifications · Black Seal Boiler Operator License. · Minimum of two years’ experience in facilities maintenance. · High school diploma. · Valid NJ Driver’s license. Please send your resume and note indicating your interest to Ann Marie at , with the email subject " Maintenance Technician / Boiler Operator.” Compensation Starting salary: $27 – 33.50 per hour depending on experience; health benefits included

Job DescriptionCompany Description Headquartered in Cordova, TN, Stratas Foods is a 50/50 joint venture formed in October 2008 between ACH Food Companies and Archer Daniels Midland Company. Stratas Foods is built on the combined strengths and expertise of these two great parent companies, laid down over the course of over 200 years of combined experience. Stratas will continue to build on this foundation of excellence by providing value added, branded and custom formulated fats and oils solutions to the Food Service, Food Ingredient and Retail sectors. At Stratas Foods we are committed to being the most valued supplier of fats, oils, dressings, mayonnaise and salad dressings to the private label retail bottled oils market in the United States. Manufacturing facilities are located in Dallas and Houston, TX; Decatur and Quincy, IL; Englewood, NJ; Hillside, NJ; Fresno, CA; Nashville, TN; and Valdosta, GA. Corporate offices are located in Memphis, TN. We are committed to maintaining a progressive workplace by utilizing the ideas, skills and talents of all of our employees. We strive to make Stratas Foods a great place to work and are building a team capable of meeting our business goals. Job Description The Operator I will operate machines such as filling equipment, cappers, labelers, sealers, and other related equipment to meet customer order driven production schedule. To perform duties in operating, repairing, overhauling mechanical equipment. Supervise the operation of machines and equipment. This operation is to be performed keeping safety as a primary objective and following established GMP, Safety, Regulatory and Stratas Foods procedures and policies. Responsibilities: • Must follow GMP’s and safety guidelines and wear PPE and adhere to all safety rules, • Determining machine adjustments based on product specifications and material requirements, • Setting stops or guides to specified length as indicated by scale, rule, or template, • Observing machine operation and detecting product defects and/or machine malfunctions, • Actively identifies mechanical issues which have the potential for machine breakdown and/or downtime for reporting to supervisor and reducing downtime, • Properly recording reasons for down time in CDC system, • Stopping and resetting equipment when malfunctions occur, clearing machine jams, and reporting impairments to the Production Supervisor, • Performing periodic product sample weights to ensure proper fill weight and ensuring quality and conformity of filled products against the customers standards, • Replacing and replenishing containers of product to be filled and packaging supplies such as: film, laminate, and mount rolls on spindles, • Responsible for completing documentation required for product quality assurance, • Responsible for performing change overs and minor machine maintenance and adjustments as required, and effectively communicating with maintenance personnel when maintenance requirements are more considerable, • Provide assistance to mechanics during preventative maintenance and machine service or repairs following proper Lockout/Tag out proceduresQualifications, • High School Diploma, • Experience operating in a fast paced, ready to eat food facility a plus, • Ability to be self-guided and motivated to operate independently, • Strong multi-tasking skills, • Ability to work well under pressure Additional Information Physical: This position requires the ability to lift up to 50 pounds, climb stairs, bend, kneel, stand for extended periods, work in confined spaces, and work at heights Sensory: Ability to hear, see, speak, smell and touch well is necessary to perform basic essential task. Pay Range: $18.06 Benefits: Medical, Dental, Vision Stratas Foods is an equal opportunity employer and will not discriminate against any applicant or employee in any manner prohibited by law, including but not limited to, on the basis of race or color, religion, gender, age, genetic information, national origin/ancestry, mental or physical disability, family status/marital status, military/veteran status, and any other legally protected status. Pay Transparency Nondiscrimination Provision-The Employer will not discharge or in any other manner discriminate against employees or applicants because they have inquired about, discussed, or disclosed their own pay or the pay of another employee or applicant. However, employees who have access to the compensation information of other employees or applicants as a part of their essential job functions cannot disclose the pay of other employees or applicants to individuals who do not otherwise have access to compensation information, unless the disclosure is (a) in response to a formal complaint or charge, (b) in furtherance of an investigation, proceeding, hearing, or action, including an investigation conducted by the employer, or (c) consistent with the Employer’s legal duty to furnish information. 41 CFR 60-1.35(c) Stratas Foods Applicant Request for Accommodation Form: Stratas Foods California Privacy Rights Act Policy:

Job Description NEXPERA leads the way in sulfuric acid and potassium hydroxide regeneration, offering a comprehensive range of products and services that optimize processes, minimize environmental impact, and allow our partners to focus on their core operations. With the industry’s largest facility network, we ensure unmatched reliability and drive innovation across the industrial landscape. In addition, we provide an unmatched array of sulfur-based chemicals and related services to a diverse set of industries. BENEFITS Nexpera's comprehensive benefits package includes paid time off policies, as well as health, dental and vision insurance. In addition, employees are also entitled to participate in an employer sponsored 401(k) plan, to save for retirement. Pay and benefits for employees represented by a union are outlined in their collective bargaining agreement. POSITION PURPOSE The Chemical Operator will monitor and operate equipment and facilities, including field equipment, ensuring quality and conformance with standard operating procedures. Additional responsibilities include always maintaining safety standards and initiating and following emergency procedures when necessary. The Operator will perform basic maintenance repair and upkeep on area equipment. Job tasks are performed in control room, lab areas, and throughout various operation areas of the site. The site operates a process safety management-covered process that produces sulfuric acid in multiple concentrations. Product is shipped in rail cars, tank trucks and portable totes. PRIMARY DUTIES / RESPONSIBILITIES (but not limited to): • Start up and shut down (normal and emergency) plant systems and components., • Operate, monitor and control plant systems; visually inspect, monitor equipment and process conditions., • Prepares equipment for maintenance work by isolating, clearing and locking out., • Reviews, follows and, if qualified, revises detailed process operating procedures, maintenance procedures and safety procedures., • Troubleshoots equipment to restore to normal operation., • Analyzes charts and logs to identify potential or actual problems., • Identifies system problems to stabilize plant to normal conditions., • Trains new operators in the area, reinforcing safety and environmental principles., • Performs loading and unloading of railcars, tank trucks and totes., • Perform laboratory analysis of products., • Clerical duties as required., • Shipping duties as required., • Operate mobile equipment including manlifts, fork trucks, yard-dog and trackmobile., • Participate/Lead various site teams., • Recognize abnormalities in a High Hazard work area and promptly initiate action to secure the safety of all personnel along with protection of the environment and local community. Qualifications In order to be qualified for this role, the following is required: • High School Diploma/GED equivalent, • Minimum of 2 years’ experience in an industrial or manufacturing environment, • Ability to navigate the tools of Microsoft Office Suite (Outlook, Word, Excel, etc.) and Google Suite (Sheets, Docs, etc.) and learn new computer systems and software applications, • Willing and able to work 12-hour rotating shifts, including overtime, nights, weekends, holidays and short notice call-in if required, • Willing and able to lift up to 50 lbs, • Willing and able to work in a High Hazard environment; outdoors, indoors, elevated heights and confined spaces, • Willing and able to wear required PPE (personal protective equipment) such as steel toe shoes, hardhat, protective eyewear, face shields, respirator, chemical acid suit, etc., • Willing and able to climb stairs, ladders; stand, walk, stoop, bend, kneel, crawl; visual acuity for close work; able to reach overhead; able to hear and respond to alarms, • Willing and able to acquire a boiler’s license, • Current and valid driver’s license – willing and able to obtain powered industrial truck (i.e., fork trucks and manlifts) certification, • Willing and able to operate a trackmobile to move railcars on-site and a yard-dog to move product trailers as needed on the site., • High Hazard/Chemical operations experience, • Experience reading and interpreting Schematics, Pipe & Instrumentation Diagrams, Procedures, Manufactures’ Literature, Safety Requirements, General Instructions; ability to learn and detect process deviations, • Experience operating fork trucks, • Experience with SAP or equivalent Manufacturing Operations software Successful candidates must be able to perform the essential functions of the job with or without accommodation. Additional information We are an Equal Opportunity Employer! All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability or protected veteran status.

Job Description Position Summary The Chief Operations Officer will be a dynamic, strategic, and mission-driven leader, leading the operations of the YMCA of MEWSA> This is a pivotal executive leadership role for a builder–operator: a leader who can both drive operational excellence today and build the systems, structure, and capacity needed for long-term growth and sustainability. Reporting to the President & CEO, the COO serves as a key member of the senior leadership team and is responsible for the oversight of branch operations, program delivery, and key functional areas. The COO ensures alignment with the YMCA’s strategic plan and advances the organization’s mission through high-quality programs and services. YMCA Mission To put Christian principles into practice through programs that build healthy spirit, mind, and body for all. About the YMCA of MEWSA The YMCA of MEWSA is a leading nonprofit organization serving Middlesex County and surrounding communities. • Annual Operating Budget: ~$15 million, • Net Assets: $24+ million, • Operations: 4 branches and 20+ licensed child care and school-based program sites Community Located in Middlesex County, New Jersey, the YMCA serves vibrant, diverse communities with strong school systems and active municipal leadership. The region offers proximity to New York City and Philadelphia thanks to an extensive transportation system. Middlesex County boasts excellent public schools, and is home to Rutgers University, ensuring access to top-notch education. The County offers diverse recreational opportunities, from parks and sports facilities to cultural and historical sites. The robust healthcare system offers several top-rated hospitals ensuring quality medical care. The thriving job market offers ample employment opportunities for all career paths. Overall Middlesex County provides a perfect balance of convenience, community and opportunity for its residents. Essential Functions Cause-Driven Leadership • Models the YMCA’s mission and values in all aspects of leadership, • Builds relationships that support community engagement and impact, • Provides direct leadership and oversight of branch operations and program delivery, • Ensures high-quality, consistent program execution across all locations, • Provides strategic oversight of early learning and school-age childcare programs, • Strengthens enrollment, retention, and program quality, • Partners with the CEO and finance team to achieve budget targets, • Improves program profitability and cost management, • Builds and implements scalable systems, processes, and operating models, • Work in tandem with the CEO to lead the conversion of strategic priorities into clear operational plans supporting the Association’s Balance Scorecard and KPIs., • Leads initiatives that strengthen organizational infrastructure and long-term sustainability, • Leads, develops, and inspires a high-performing leadership team, • Fosters a culture of accountability, collaboration, and inclusion Organizational Leader Certification (or willing to achieve in an agreed upon timeframe). The COO will demonstrate the following Y-USA leadership competencies: Mission Advancement • Reinforces the YMCA’s values within the organization and the community, • Develops and maintains strategic relationships, • Holds staff accountable for high-quality results using a formal process, • Demonstrates adaptability and emotional maturity, • Bachelor’s degree required; advanced degree preferred, • Minimum of 7–10 years of senior leadership experience in a multi-site organization, • YMCA experience preferred; nonprofit or mission-driven leadership required, • Strong operational, financial, and program management experience, • Demonstrated success in building systems, improving performance, and scaling operations, • Proven ability to lead and develop teams $160,000 – $190,000, commensurate with experience, A comprehensive benefits package. Why This Role Matters This is a unique opportunity to serve as a key executive leader in a growing YMCA, helping to: • Elevate operational performance, • Strengthen child care and school partnerships, • Expand impact in underserved communities, • Build a sustainable, high-performing organization

Job Description Spark Car Wash is a high growth, institutionally backed express exterior car wash company serving the Northeast. Spark is growing fast and plans to open a significant number of modern car wash locations throughout NJ, NY, and PA. Spark’s success is driven by a relentless focus on making the car wash an energizing experience for all, delivering a consistently excellent experience for customers and creating an enriching environment for employees. Guided by our values, Spark’s vision is to become the largest car wash operator in the region and the premier car wash brand in the market. Position Summary The Product Manager (Operations & Systems) is a cross-functional leader responsible for the technical and operational heartbeat of Spark Car Wash. This role ensures that our customer-facing technology (POS) and our physical output (Wash Quality) are perfectly synchronized. You will serve as the primary architect for site-level system setups, the lead educator for General Managers on operational technology, and the objective voice of performance through rigorous Facilities Management (FM) and Wash Quality reporting. Your goal is to eliminate operational friction and guarantee a premium, consistent experience across all locations through data transparency and high standards. Essential Functions • System Deployment: Lead the end-to-end setup and configuration of Point of Sale (POS) hardware and software for new site commissions and existing site refreshes., • Operational Training: Design and execute comprehensive training programs for General Managers (GMs) focusing on POS utilization, member management, and site-level troubleshooting., • Quality Governance: Conduct systematic Wash Quality Inspections to ensure mechanical, chemical, and systemic components produce a vehicle output that meets the "High Wash Quality Standard.", • Performance Auditing: Develop and distribute "Transparency FM Performance" reports that objectively measure equipment uptime, maintenance completion, and site-level technical compliance., • Data Strategy: Maintain and iterate on Wash and FM Reporting dashboards to provide executive leadership with a "single source of truth" regarding site health and production efficiency. Job Requirements • High school diploma or GED preferred., • Strong organizational, analytical, and problem-solving abilities., • Ability to work independently and adapt quickly to changing priorities in a fast-paced environment., • Basic computer proficiency with common business software and systems., • Deep functional knowledge of car wash industry POS systems and their integration with tunnel controllers., • Excellent communication and teamwork skills, with the ability to collaborate effectively across site leadership and staff., • Proven train-the-trainer capability, translating complex technical processes into clear, repeatable workflows for General Managers and site teams., • Strong attention to detail with a high-quality mindset, maintaining high standards for wash output, equipment performance, and facility maintenance., • Ability to deliver candid performance feedback to site leadership while maintaining a collaborative and solution-focused approach., • Demonstrated ability to diagnose tunnel performance, identifying subtle deviations in chemical titration, water pressure, and brush timing that impact wash quality., • Must be willing and able to travel regularly throughout NJ, NY, and PA as required, • Valid driver’s license and clean driving record and be able to meet our MVR requirements Physical Job Requirements: • Physically capable of lifting to 75 lbs. and working on your feet for extended periods., • Competitive hourly pay with uncapped commission earning potential, • Comprehensive health, dental, and vision insurance, • 120 hours PTO, • Retirement savings plan with company match, • Employee Car Wash Plan

Job Description General Description: Contact point for all shift team members with effective communication skills. Ability, to motivate, be proactive and ensure smooth operations with collaboration in effort to meet the department goals and objectives. Think logically and display technical aptitude to solve problems with creativity, diligence, and achievement. Produce machined parts by programming, setting up and operating a computer numerical control (CNC) machine. Maintaining equipment, adhering to quality and safety standards, saving, and updating parts programing, are some of the core responsibilities of a CNC operator. Reports to: Department Manager Responsibilities: • Programming, program selection, & program editing on CNC multi-axis turning centers., • Interpret engineering drawings to manufacture parts using CNC machinery, • Ability to make correct tool selection for parts manufacture, • Demonstrate ability to process work orders independently or with minimal instructions., • Perform preventative maintenance on machinery and equipment, • Identify quality, process, machinery, or equipment defects, • Delegate Operator tasks, set clear team performance expectations., • Oversee day-to-day shift operation, promoting a Safe work environment., • Improve the quality output of parts and work hands on with the quality department, • Implement continual training for teammates., • Troubleshoot equipment when there is a problem., • Other duties as assigned Minimum Educational Qualifications (If Applicable): • 7+ years working in a manufacturing environment/machine shop, • Proficiency with heavy machinery including lathe, drill press, grinding wheel, chop saw, and mill., • Ability to sequence or edit programs on lathe and CNC. • Read measuring tape, gauges, and calipers • Must be able to lift and move up to 40 lbs. Minimum Additional Training (If Applicable): • Company’s Quality Management System., • ISO 9001:2015 awareness., • Other Skills:, • Hand-eye coordination., • Attention to detail.

Job Description Duties & Responsibilities: Performs laboratory tests on acceptable specimens to obtain accurate data in accordance with established procedures and protocols and in a timely manner. · Precisely follows established testing, reporting, and operational policies, procedures, and clinical protocols. · Maintains high quality and accuracy of work at all times. · Correlates and applies knowledge to day-to-day operations, sustaining a high level of independent judgment. · Adapts to changing technology. Accepts and performs new procedures with an average amount of supervision and performs such procedures without difficulty after training. · Documents handwritten information accurately, and neatly. · Verifies results of STAT tests within established turn-around-time guidelines. · Utilizes time efficiently and offers to help others when work in assigned area is complete. · Sets an example in work performance and team building, concern for patients and co-workers by maintaining a positive interpersonal approach and demeanor. · Meets competency level for tests that are offered in that technical area or meets competency in sub-specialty area(s). · Works productively with minimal errors and follow-up. · Demonstrates professionalism. Performs quality control (QC), and proficiency testing (PT) as assigned. · Regularly performs Quality Control following established procedures and clinical protocols. · Regularly releases test results only when quality control (QC) values are acceptable. · Completes preliminary investigation and troubleshoots out-of-range QC. Routinely resolves QC problems without help. · Performs, reviews, and reports PT following established procedures in the indicated timeframe. · Actively participates in setting up and establishing plans for validation / verification of new reagents, quality control, tests or instruments as assigned by the Director, Assistant Director, Manager, or Supervisor. Responsible for compiling data and submitting for review, as required. Maintains laboratory equipment, instruments, reagents and/or supplies required in performance of job responsibilities. · Performs and documents scheduled instrument maintenance and/or calibrations following approved procedures and within the defined frequency as indicated. · Identifies instrument problems and handles troubleshooting and documentation according to approved procedures. Seldom requires assistance to resolve routine instrument problems. · Reports a variance from normal procedures and/or instrument malfunctions within 1⁄2 hour to the supervisor or assistant director. · Uses reagents and supplies prudently and takes timely and appropriate action when supplies are noted to be low so as not to overstock or exhaust supplies. Receives and puts away supplies on a timely basis following established protocols. Maintains a clean and orderly work environment. · Maintains a tidy and orderly work area such that coworkers can readily follow and pick up workflow. · Documents appropriate follow-through, and communicates pending work to next shift. · Cleans immediate work area at end of shift per established procedures. · Restocks supplies and/or reagents in immediate work area at end of shift. Direct, review, and /or verify work of other clinical laboratory personnel or technologist trainees. · Actively assumes responsibility as primary operator of an analyzer, or specialized work area. · Performs accurate result review on a timely basis. · Willingly participates and is actively involved in the training of new employee or technologist trainees. · Completes training documentation for each trainee/new hire for each area assigned. · Provides a positive training experience for staff/trainee as assigned. Medical Technologists meeting NYSDOH qualifications for a Laboratory Supervisor (10 NYCRR, Part 58-1, section 1.4) may be required to perform supervisory functions in the absence of the regular supervisor. · Monitors workflow on an ongoing basis and adjusts staff accordingly to assure results are timely. · Reviews results and documents in accordance with state and federal regulations. · Reviews QC data on an ongoing basis. Documents corrective action for any QC not within established guidelines. · Willingly assumes charge person and/or “Go To” responsibilities during the week, on weekends and holidays. Required responsibilities for all Medical Technologist positions: · Completes the laboratory safety exam on an annual basis. · Completes the laboratory compliance exam on an annual basis. · Completes one (1) hour of compliance training annually as defined by the department. · Attains and documents at least 15 units of continuing education annually as defined by departmental policy. · Attends department staff meetings; reviews minutes of any missed meetings on a timely basis. · Keeps the Supervisor informed and communicates effectively to ensure vital patient and operational information is shared among co-workers and shifts appropriately. · Maintains technical competence within areas of responsibility by completing annual competency requirements as defined by departmental policy. · Understands the existing and potential hazards in the work area in such a way as to prevent injury/illness by following laboratory health and safety policies and procedures. · Timely corrects and/or reports any safety hazard or malfunctioning of equipment within their work shift. · Follows laboratory and departmental policies and procedures related to compliance to assure current Medicare regulations are upheld. Performs similar or related duties as requested or directed. Organizational Responsibilities: · Adheres to standards of practice as set forth in policy and guidelines to assure patient safety. · Uses supplies and institutional resources in a financially responsible manner. · Maintains an orderly, clean and safe work environment. · Maintains appropriate, professional personal appearance, including but not limited to required attire such as uniforms and safety apparel. · Assists in the training process of technical trainee/or orientation of new personnel. · Participates in staffing patterns that reflect variable demands in service. · Demonstrates a positive attitude. · Uses flexibility and innovation while problem solving. · Demonstrates collaborative practice, support and respect for each team member. · Participates in departmental / organizational committees. · Demonstrates initiative in expanding and sharing knowledge. · Participates in continued education through attendance and presentations at in-service or on-line sessions. · Communicates with coworkers while adhering always to laboratory policies for the protection of the privacy of patient health information and confidentiality. · Assists with the development and implementation of policies and procedures. · Communicates necessary information to supervisor or team leader in support of unit, departmental and facility standards and policies. Requirements: Education: · Bachelor's degree in Medical Technology, Biology or Chemistry, or related field required. Although required, a bachelor’s degree may not be required if NYS SED has permitted the successful incumbent as a Clinical Laboratory Technologist under their grandfathering rules. Experience: · Candidates must be qualified as a Medical Technologist in accordance with New York State Department of Health regulations. · Experience in standard laboratory methodologies required. · Previous Clinical Laboratory experience, preferred. · Previous experience with a Laboratory Information System (LIS), preferred. Licensure/Certificates: · Current valid licensure by NYS SED as a Clinical Laboratory Technologist required, or licensure-eligible with a limited permit or limited license as a Clinical Laboratory Technologist. Company DescriptionLincoln Reference Laboratory is one of the largest independent, general diagnostic laboratories, located in Union NJ. We take pride in delivering quality service since 2004 for a broad range of medical diagnostic testing in our new and advanced facility. We cover industry leading medical testing in Molecular Oncology, Hematology, Histopathology, and Chemistry. Excellence and specificity of patient testing is our highest priority! Our facility in New Jersey provides an array of services in molecular oncology, diagnostic blood testing, toxicology, GI testing, RPP, Urovysion Fish, H.Pylori breath test, and so much more. All testing is done in-house, which increases turnaround time. Looking at the patient’s susceptibility to illness on a genetic level provides physicians with greater insight into improving patient care. Our state-of-the-art instrumentation and highly skilled and licensed technologists provide quality results and consultation. For many years our experienced pathologists offer their expertise in the oversight of diagnostic cases from all tissue specimens. We provide a full range of histology services, including grossing, processing, embedding, microtome, routine, and special staining. We ensure properly prepared tissues and slides to provide accurate diagnoses. We are highly experienced technologists, who are registered and licensed by NY and other states in US. We use latest, state-of-the-art, medical equipment and instrumentation in the preparation of specimens, and we guarantee strictest quality assurance mechanisms are implemented to maintain consistency and precision. For all our client’s convenience, we offer a web-based reporting tool to get testing results. You can now securely access results virtually anywhere and at any time. At Lincoln Diagnostics LLC, we can guarantee fast responses to your concerns and immediate action should you wish to receive them. Certifications National Women Business Owners Corporation (NWBOC)Lincoln Reference Laboratory is one of the largest independent, general diagnostic laboratories, located in Union NJ. We take pride in delivering quality service since 2004 for a broad range of medical diagnostic testing in our new and advanced facility. We cover industry leading medical testing in Molecular Oncology, Hematology, Histopathology, and Chemistry. Excellence and specificity of patient testing is our highest priority!\r\n\r\nOur facility in New Jersey provides an array of services in molecular oncology, diagnostic blood testing, toxicology, GI testing, RPP, Urovysion Fish, H.Pylori breath test, and so much more. All testing is done in-house, which increases turnaround time. Looking at the patient’s susceptibility to illness on a genetic level provides physicians with greater insight into improving patient care.\r\n\r\nOur state-of-the-art instrumentation and highly skilled and licensed technologists provide quality results and consultation. For many years our experienced pathologists offer their expertise in the oversight of diagnostic cases from all tissue specimens. We provide a full range of histology services, including grossing, processing, embedding, microtome, routine, and special staining. We ensure properly prepared tissues and slides to provide accurate diagnoses.\r\n\r\nWe are highly experienced technologists, who are registered and licensed by NY and other states in US. We use latest, state-of-the-art, medical equipment and instrumentation in the preparation of specimens, and we guarantee strictest quality assurance mechanisms are implemented to maintain consistency and precision.\r\n\r\nFor all our client’s convenience, we offer a web-based reporting tool to get testing results. You can now securely access results virtually anywhere and at any time. At Lincoln Diagnostics LLC, we can guarantee fast responses to your concerns and immediate action should you wish to receive them.\r\n\r\nCertifications\r\nNational Women Business Owners Corporation (NWBOC)

Job Description ABOUT THE COMPANY Playa Bowls is New Jersey's Original Acai Shop, founded in 2014, and our mission is to bring superfruit bowls to the masses using only the freshest, highest quality ingredients while providing a fantastic in-store brand experience. What began as a pair of blenders, a patio table, and a fridge has flourished into a 300+ unit operator and franchisor of the leading fast casual restaurant concept. Playa Bowls added more than 70+ locations in 2024 and are on target to add as many 90 new locations in 2025. Our continued rapid growth has created the opportunity for an individual who will help us with continuing to grow our brand! WHAT WE OFFER • Competitive Pay + Tips: Enjoy a competitive hourly wage along with both credit card and cash tips — your hard work pays off!, • Professional Development: Our comprehensive Playa Bowls training program helps you build valuable skills that will benefit you in any career path., • Vibrant Work Culture: We keep energy high with a fun, upbeat environment where dancing, smiling, and having a good time are part of the job. You’re a positive, enthusiastic, and people-oriented individual with a passion for superfoods, healthy living, and (of course) fruit! As a Team Member at Playa Bowls, you’ll play a key role in creating an exceptional guest experience — from helping new customers discover their perfect superfruit blend to crafting high-quality bowls with care and creativity. You take pride in maintaining a clean, welcoming environment while upholding food quality and company standards. If you thrive in a fast-paced setting, are excited about growth and innovation, and appreciate a good food pun now and then, you’ll be a great fit for our team! WHAT YOU’LL DO • Maintain a clean, organized, and welcoming environment throughout the shop, • Manage your time effectively to complete all tasks and responsibilities efficiently, • Foster a positive and friendly atmosphere for both guests and fellow team members, • Ensure food quality by checking for consistency, flavor, and overall presentation, • Prepare ingredients and assemble bowls, smoothies, and other menu items with care and accuracy, • Operate the point-of-sale (POS) system to take and process customer orders, • Answer customer questions and address concerns in a friendly and helpful manner, • Accurately take and assemble customer orders in a timely manner, • Restock supplies, replenish condiments, and assist with inventory management as needed, • Communicate any inventory shortages or product concerns to the supervisor promptly, • Committed to delivering exceptional customer service by providing friendly, attentive service and ensuring satisfaction with every guest interaction., • Proven ability to remain flexible in a fast-paced dynamic environment, quickly adjusting to changing priorities and customers’ needs to maintain seamless operations., • Collaboratives effectively with team, fostering a positive and productive work environment, • Skilled at prioritizing tasks to meet customer demands during peak hours, • Ability to handle customer concerns or operational challenges with assistance from management calmly and effectively, • Must be able to remain in a stationary position for prolonged periods of time, • Must be able to lift or otherwise move 25-40 pounds occasionally, • Must be able to retrieve items from high and low shelving, the fridge/freezer, and under counters, • Must be able to tolerate occasionally loud environments (high powered blenders, timers, and order notifications). Inspire and support our communities one bowl at a time. VALUES Real Deal. Playa Passion. Powerhouse. Big Wave Chaser. Dawn Patrol “Playa Bowls is an equal opportunity employer committed to inclusivity and diversity in our workplace and all aspects of employment including the decision to hire, promote, discipline, or discharge, will be based on merit, competence, performance, and business needs. We do not discriminate on the basis of race, color, religion, marital status, age, national origin, ancestry, physical or mental disability, medical condition, pregnancy, genetic information, gender, sexual orientation, gender identity or expression, veteran status, or any other status protected under federal, state, or local law.”

Job DescriptionCompany Description Headquartered in Cordova, TN, Stratas Foods is a 50/50 joint venture formed in October 2008 between ACH Food Companies and Archer Daniels Midland Company. Stratas Foods is built on the combined strengths and expertise of these two great parent companies, laid down over the course of over 200 years of combined experience. Stratas will continue to build on this foundation of excellence by providing value added, branded and custom formulated fats and oils solutions to the Food Service, Food Ingredient and Retail sectors. At Stratas Foods we are committed to being the most valued supplier of fats, oils, dressings, mayonnaise and salad dressings to the private label retail bottled oils market in the United States. Manufacturing facilities are located in Dallas and Houston, TX; Decatur and Quincy, IL; Englewood, NJ; Hillside, NJ; Fresno, CA; Nashville, TN; and Valdosta, GA. Corporate offices are located in Memphis, TN. We are committed to maintaining a progressive workplace by utilizing the ideas, skills and talents of all of our employees. We strive to make Stratas Foods a great place to work and are building a team capable of meeting our business goals. Job Description The Operator I will operate machines such as filling equipment, cappers, labelers, sealers, and other related equipment to meet customer order driven production schedule. To perform duties in operating, repairing, overhauling mechanical equipment. Supervise the operation of machines and equipment. This operation is to be performed keeping safety as a primary objective and following established GMP, Safety, Regulatory and Stratas Foods procedures and policies. Responsibilities: • Must follow GMP’s and safety guidelines and wear PPE and adhere to all safety rules, • Determining machine adjustments based on product specifications and material requirements, • Setting stops or guides to specified length as indicated by scale, rule, or template, • Observing machine operation and detecting product defects and/or machine malfunctions, • Actively identifies mechanical issues which have the potential for machine breakdown and/or downtime for reporting to supervisor and reducing downtime, • Properly recording reasons for down time in CDC system, • Stopping and resetting equipment when malfunctions occur, clearing machine jams, and reporting impairments to the Production Supervisor, • Performing periodic product sample weights to ensure proper fill weight and ensuring quality and conformity of filled products against the customers standards, • Replacing and replenishing containers of product to be filled and packaging supplies such as: film, laminate, and mount rolls on spindles, • Responsible for completing documentation required for product quality assurance, • Responsible for performing change overs and minor machine maintenance and adjustments as required, and effectively communicating with maintenance personnel when maintenance requirements are more considerable, • Provide assistance to mechanics during preventative maintenance and machine service or repairs following proper Lockout/Tag out proceduresQualifications, • High School Diploma, • Experience operating in a fast paced, ready to eat food facility a plus, • Ability to be self-guided and motivated to operate independently, • Strong multi-tasking skills, • Ability to work well under pressure Additional Information Physical: This position requires the ability to lift up to 50 pounds, climb stairs, bend, kneel, stand for extended periods, work in confined spaces, and work at heights. Sensory: Ability to hear, see, speak, smell and touch well is necessary to perform basic essential task. Pay Range: $17.45 Benefits: Medical, Dental, Vision Stratas Foods is an equal opportunity employer and will not discriminate against any applicant or employee in any manner prohibited by law, including but not limited to, on the basis of race or color, religion, gender, age, genetic information, national origin/ancestry, mental or physical disability, family status/marital status, military/veteran status, and any other legally protected status. Pay Transparency Nondiscrimination Provision-The Employer will not discharge or in any other manner discriminate against employees or applicants because they have inquired about, discussed, or disclosed their own pay or the pay of another employee or applicant. However, employees who have access to the compensation information of other employees or applicants as a part of their essential job functions cannot disclose the pay of other employees or applicants to individuals who do not otherwise have access to compensation information, unless the disclosure is (a) in response to a formal complaint or charge, (b) in furtherance of an investigation, proceeding, hearing, or action, including an investigation conducted by the employer, or (c) consistent with the Employer’s legal duty to furnish information. 41 CFR 60-1.35(c) Stratas Foods Applicant Request for Accommodation Form: Stratas Foods California Privacy Rights Act Policy:

Job Description Raymond of New Jersey is a Material Handling Company, offering a broad range of forklift equipment, parts, service, rentals, and warehouse solutions. Currently seeking - A-Level Forklift Technician's (ONLY) - To join this incredible team of professionals in both our Union and Cranbury, New Jersey locations. If you're passionate about maintaining and repairing forklifts, WE WANT TO HEAR FROM YOU!! EARN TOP DOLLAR- We will beat your current pay substantially! (This is not a Forklift Operator position) -This position is a skilled role and MUST have prior experience. Please do not apply if you do not possess any mechanical experience. The ideal candidate for this role will have the ability to hit the ground running, in areas of service, repairing and diagnosing issues with Electric and Internal Combustion Forklift engines and systems, with an emphasis on Electric Forklift Repair. This role includes working with all facets of forklift repair, which includes the following: • Electrical System Troubleshooting, • Hydraulic repair, • Propane fuel system repair, • Electric computer control repair and diagnosis, • Must have knowledge of mechanical, electrical, and hydraulic systems, • Exceptional customer service skill, • Clean driving record, • Dependable, self-motivated professional, • Excellent work ethic and a POSITIVE attitude, • Ability to work with specialized mechanical and basic hand tools., • Clean professional appearance and will wear complete company uniform including safety boots. · Paid training. · Competitive Salary and Benefit package · Offering Medical, Dental, Life Insurance, 401K and Paid time off. · Opportunities for growth and advancement · Collaborative and supportive work environment. We are an equal opportunity employer. All applicants will be considered for employment without attention to race, color, religion, sex, sexual orientation, gender identity, national origin, and veteran or disability status Job Type: Full-time Company DescriptionRaymond of New Jersey is a Premier Material Handling Dealership located in NJ offering a broad range of forklift equipment, parts, service, rentals and warehouse solutions.Raymond of New Jersey is a Premier Material Handling Dealership located in NJ offering a broad range of forklift equipment, parts, service, rentals and warehouse solutions.

Job DescriptionStudio Leads at JETSET Pilates are dynamic team members that help clients and assist instructors. Studio Leads are responsible for providing exceptional service to clients while assisting staff, whether it be in-person, via email, or over the phone. Most importantly, Studio Leads will build rapport with all clients and staff to create and maintain a welcoming environment. Studio Leads will be required to answer phones, field questions, respond to emails, and process sales in keeping with JETSET Pilates Standards of Service. They are expected to perform retail transactions accurately, maintain a clean and organized front desk and lobby area, assist Instructors in opening & closing duties, and stay up-to-date on all policies and pricing options in order to provide accurate information to existing clients and potential new clients. Studio Leads assume other duties as assigned and are expected to work morning, evening, and weekend shifts as necessary. Duties and Responsibilities • Assist in delivering the ultimate boutique fitness experience to every client, every time., • Provide the highest level of customer service to all clients and visitors upon arrival., • Greet and check-in clients professionally upon arrival and thank them as they leave., • Recruit and retain clients, answer questions, solve problems, and refer comments and concerns appropriately., • Sell memberships and class packages in-person, online, and over the phone., • Facilitate new sales, in conjunction with the General Manager/Owner-Operator by utilizing the Client Relationship Manager (CRM) system (AXLE)., • Maintain a clean and tidy studio.

Job DescriptionStudio Leads at JETSET Pilates are dynamic team members that help clients and assist instructors. Studio Leads are responsible for providing exceptional service to clients while assisting staff, whether it be in-person, via email, or over the phone. Most importantly, Studio Leads will build rapport with all clients and staff to create and maintain a welcoming environment. Studio Leads will be required to answer phones, field questions, respond to emails, and process sales in keeping with JETSET Pilates Standards of Service. They are expected to perform retail transactions accurately, maintain a clean and organized front desk and lobby area, assist Instructors in opening & closing duties, and stay up-to-date on all policies and pricing options in order to provide accurate information to existing clients and potential new clients. Studio Leads assume other duties as assigned and are expected to work morning, evening, and weekend shifts as necessary. Duties and Responsibilities • Assist in delivering the ultimate boutique fitness experience to every client, every time., • Provide the highest level of customer service to all clients and visitors upon arrival., • Greet and check-in clients professionally upon arrival and thank them as they leave., • Recruit and retain clients, answer questions, solve problems, and refer comments and concerns appropriately., • Sell memberships and class packages in-person, online, and over the phone., • Facilitate new sales, in conjunction with the General Manager/Owner-Operator by utilizing the Client Relationship Manager (CRM) system (AXLE)., • Maintain a clean and tidy studio.

Job Description Spark Car Wash Over View: Spark Car Wash is a high growth, institutionally backed express exterior car wash company serving the Northeast and headquartered in Summit, NJ. Our mission is to become the premier car wash brand in the market by providing consistent excellence to our customers and an enriching environment for our employees. Spark is in the process of launching multiple best-in-class locations with a vision of becoming the largest operator in the region. Position Summary: As Spark continues to grow, we are actively seeking a skilled Field Technician to join our Operations team, reporting directly to the Director of Product. The Field Technician plays an integral, hands-on role in ensuring that Spark Car Wash maintains best-in-class facilities by executing a comprehensive maintenance and repair program. This work protects our equipment, ensures the safety of our team members, and ultimately delivers a cleaner car for our customers. This role will be field based, completing maintenance at the sites. You will be serving our growing store base in Northern New Jersey, New York, and Pennsylvania. The Field Technician is expected to travel to stores 100% of the time and be on-site at locations daily to complete maintenance. This is a hands on role. Key Responsibilities: • Maintenance Audits: Ensure General Managers and teams complete daily, weekly, and monthly maintenance checklists accurately and consistently., • Process & Scheduling: Maintain maintenance schedules for all equipment., • Troubleshooting & Repairs: Diagnose and repair mechanical, electrical, hydraulic, pneumatic, plumbing, and water system issues., • Safety Optimization: Uphold a clean, safe work environment by enforcing Spark’s safety policies and procedures., • Inventory Management: Track and manage inventory of parts, tools, and key equipment components., • Vendor Coordination: Collaborate with third-party vendors to procure equipment, schedule service, and manage relationships., • Installation Support: Assist with equipment delivery and setup during new store openings or remodels, working closely with the Real Estate, Construction, and Operations teams., • Reporting: Document and report on all equipment downtime, repair activity, and facility-related concerns. Required Skills, Education & Experience: • High school diploma or GED preferred, • Proven experience in troubleshooting and maintaining:, • Electrical Systems: VFDs, relays, sensors, switches, three-phase motors, etc., • Pneumatics & Hydraulics: solenoids, regulators, valves, compressors, pumps., • Mechanical Components: conveyors, bearings, gearboxes, welding, etc., • Water Systems: reclaim, RO systems, boilers, softeners, • Preventative maintenance experience across multiple system types, • Strong organizational and problem-solving skills, • Ability to work independently and adapt to changing priorities, • Expected to be accessible by phone during operating hours and on call as scheduled, • Availability to respond to time-sensitive repair needs including nights and weekends, • Willingness to travel throughout NJ, NY, and PA with overnight travel 25% of the time, • Valid driver’s license and ability to meet the company's Motor Vehicle Record (MVR) requirements for operating company vehicles, • Basic computer proficiency, • Excellent communication and teamwork skills, • Willingness to work in a variety of weather conditions both indoors and outdoors Physical Requirements: • Must be able to lift up to 50lbs and perform physical tasks as required, • Bending, squatting, kneeling, and climbing stairs or ladders, • Competitive base salary plus bonus compensation package, • Excellent comprehensive health coverage, including medical, dental, and vision, as well as ancillary benefits, • 401K with contribution match, • 3 weeks paid vacation, • Company fleet vehicle provided (can be used to commute to and from assigned home location), • Company laptop, • Branded company gear and free car washes