Systems control jobs in Syracuse, New York - Page 2Create job alerts

Job DescriptionDescription: Plan and perform mechanical, electrical and millwright maintenance duties as necessary to maintain facility, or to repair, move and install machinery. Senior maintenance position requiring independent identification, troubleshooting and repair of physical assets and infrastructure. Provide guidance and leadership to entry level maintenance personnel. BENEFITS: • Health Insurance, • Life Insurance, • 40 Hours PTO, • 40 Hours Sick Time, • 11 Paid Holidays, • 401K, • 401K Matching, • Up to $700 reimbursement for vision and dental claims for employee. Shift- Monday-Thursday 1:00pm-11:30pm DIRECTION EXERCISED: • Stop any unsafe act or practice., • Perform assignments involving electrical, carpentry, plumbing, masonry, etc., • Coordinate activities of Maintenance Person or Maintenance Helper assigned to the same job. Assist Maintenance Supervisor in coordinating assignments., • Work from project assignments or maintenance repair orders. Work from general or detailed instructions or prescribed routines., • Adhere to established safety rules and policies., • Keep Supervisor fully informed of any work-related problems. Notify Supervisor or Safety Director of any unsafe act or practice stopped., • Periodic retraining on applicable codes and standards, e.g. NEC., • Conduct preventative maintenance routines, oil and lubricate mechanical equipment, clean and replace filters, etc., and perform maintenance checks., • Report abnormal machine operating conditions as soon as noticed., • Do carpentry work such as cut and rip wood to build partitions, repair floors, roofs, platforms, pallets, etc., • Layout, service and install electrical services such as switch panels, fuse boxes, coils, limit switches, circuit boards, pumps, transformers, air conditioners, hydraulic systems, CRT’s, CNC Controls, etc., • Repair and/ or patch concrete floors, paint walls, etc., • Repair and perform preventative maintenance on overhead cranes., • Move and install non-electrical aspects of machinery or building equipment at ground level or overhead level that may require use of blocks, rollers, overhead crane, lift trucks, etc., • Use welding equipment to weld, cut and braze to repair equipment or projects., • Some plumbing work such as cut and thread pipe and install air, water or other types of piping transmissions, service sprinkler systems, etc., • Troubleshoot and investigate operating problems, whether it is mechanical, plumbing or other, ensure their proper operation and function., • Read and interpret measuring devices., • Follow quality control standards to ensure meeting quality and quantity requirements., • Maintain continuous movement of work, use hand truck, Lift truck or overhead crane to move work to and from designated storage, staging areas or workstation., • Keep work area neat and clean daily., • Lockout/ Tagout training. Other duties as assigned. • Troubleshoot and investigate operation problems, whether it is mechanical, plumbing, or other malfunctions & diagnose & determine solutions for problems., • Powered platform & Fall protection & Training equipment., • Be available for emergency call-ins at any time during non-scheduled working hours. Approximate: Stand- 7 hrs. Walk- 1/2 hrs. Drive Lift Truck-1/2 hrs. BREAKDOWN OF TASK PERFORMANCE: Frequent: Reaching, Handling. Occasional: Kneeling, Grasping, Bending, Work on Ladders, Fine manipulation, Stooping. Rare: Climbing, Balancing, Crouching, Crawling, Overhead lifting. During the workday the employee has to lift/Carry, Push/Pull this often: • 1-10 lbs. – Frequently (4-6 hrs.), • 11-20 lbs. – Occasional (1-3 hrs.), • 21-50 lbs. – Rarely (0-lhr), • 51-100 lbs. – Rarely (0-lhr), • Over 100 lbs. – Never, • Degree of Work this position requires is Light to Medium Work (lifting 50 lbs. maximum with frequent lifting/carrying of objects weighing up to 20 lbs., • Exposure to: Seasonal weather in the plant and outside of plant as workload necessitates., • Must be respirator certified or capable of becoming certified, • Must be lift truck certified or capable of becoming certified, • Must be power platform certified or capable of becoming certified

Job Description General Description: The Utility Maintenance Mechanic is responsible for completing assigned maintenance duties to ensure customer, team member, and vendor satisfaction. The Utility Maintenance Mechanic does this by performing onsite maintenance for production equipment by completing breakdown and preventative maintenance on all filling, packaging, processing, and palletizing equipment. The Utility Maintenance Mechanic will diagnose, repair, and replace industrial equipment in a fast-paced production environment. The Utility Maintenance Mechanic completes these functions to support the manufacturing of dairy-related products. Job Responsibilities: • Responsible for achieving assigned goals in the area of maintenance, safety, quality, performance, and cost., • Responsible for troubleshooting, maintaining, and repairing mechanical malfunctions to increase productivity and equipment capabilities – including, but not limited to, disassembling and reassembling machinery, overhauling gearboxes, replacing bearings/bushings/etc., • Read blueprints, schematics, and diagrams to determine the method and sequence of assembly of a part, machine, or piece of equipment., • Expedite the reentry of down equipment within a manufacturing environment to working conditions., • Repair and calibrate hydraulic and pneumatic assemblies., • Test the performance of electro-mechanical assemblies using test instruments such as multi-meters, volt, and amp meters., • Install electronic parts and hardware using soldering equipment and hand tools., • Operate, test, program, and maintain complete manufacturing lines such as beverage filling machines, conveyors, and palletizers., • Source parts from vendors when parts are unavailable or have long lead times; order parts in a timely manner to ensure equipment reliability., • Maintain Maintenance Inventory System to ensure accurate inventories., • Communicate effectively between shifts and other departments, including equipment status to supervisors/coworkers at the end of the shift as well as logbook documentation., • Responsible for complying with GMPs, SOPs, corporate and/or plant policies, rules, and regulations., • Responsible for following OEM manuals and executing accurate and precise procedures according to those manuals., • Aids and supports all areas in the production facility as assigned by supervisor/lead., • Responsible for gaining competence online circuits and learning proper hookups made in the facility., • Cover breaks and lunches, and other staffing needs as assigned by their supervisor/lead., • Compliant with all legal requirements concerning dairy processing and safety on their assigned shift and reports concerning their supervisor/lead., • Work in a safe manner and reports safety concerns promptly to their supervisor or lead and take corrective actions as necessary to ensure a safe environment., • Responsible for reporting food safety problems and initiating action and for supporting SQF by maintaining food safety and food quality., • Knowledge of boilers, ammonia refrigeration, steam, air compressors, HVAC, sprinkler systems, and electrical systems., • Knowledge of boilers and chemistry testing is preferred., • Knowledge of ammonia systems is preferred., • Understand and respond appropriately to basic to complex employee, vendor, and customer inquiries., • Knowledge of and Skilled in the use of Root Cause Analysis, Troubleshooting methodology, 5S, and Lean Manufacturing concepts., • Knowledge of OSHA general safety regulations, PPE, energy control, confined space, chemical safety, and fall protection., • Skills at a mastery level in at least one area of Maintenance, including electrical fabrication, refrigeration, welding, controls programming, etc., • Advanced knowledge of common wear points on equipment and following manufacturer lubrication recommendations., • Have a disciplined aptitude for repair and uptime urgency., • Own an extensive variety of quality tools, including SAE and Metric, to perform mechanical repairs on automation equipment., • Read, write, and communicate using the English language sufficient to perform job functions (Other preferences will be given for special language skills when there is a business need)., • Knowledge of the company's mission, purpose, goals, and your role in achieving each of them., • Ability to operate facility equipment as required in assigned area., • Satisfactorily complete all company training requirements., • Ability to interpret company documents and literature and UPC/code information., • A minimum of GED or High School Diploma is required., • Minimum 3-5 years’ experience in a mechanical automation field, • Technical trade, military training, or technical college is strongly preferred., • Must have experience with VFDs, stretch or blow molding, conveyors, pumps, Pneumatic sanitary valves, as well as pneumatic and hydraulic systems., • Experience with programmable logic controllers, instruments, and controls, • Experience with closed cooling systems, including evaporator towers, water cooling towers, and chillers., • Experience working in a food manufacturing environment preferred., • Responsible for reporting to work at scheduled times and communicating tardiness and absences with the assigned Supervisor/Manager prior to the occurrence., • Responsible for reporting to work in a condition to work., • Responsible for being well-groomed and dressed in a business-and position-appropriate attire at all times, including ensuring compliance with GMP dress code standards., • Comply with performance criteria, standards of conduct as contained in company policy, employment procedures, and responsibilities as described in the company handbook., • Maintain a safe work environment at all times and immediately report and take appropriate action to correct a safety concern., • Requires morning, afternoon, and overnight availability any day of the week based on assigned shift., • Requests to be scheduled off for a specific day require advance notification and approval by Supervisor/Manager., • Normally protected from weather and temperature changes, possible exposure to hot, cold, wet, humid, or windy weather conditions does exist., • May be subject to exposure to ingredients used in the manufacture of food products, including allergens., • Ability to move throughout all areas of the facility, including but not limited to office, production, and warehouse environments. Including the outside perimeter of the building., • Able to wear all necessary personal protective equipment to perform job functions., • Stand and/or sit continuously and perform job functions for a full shift with a meal break., • Physically able to stand, bend, stoop, kneel, reach, twist, lift, push, pull, climb, balance, crouch, handle, and move items weighing up to 50 pounds without assistance and move objects exceeding 50 pounds with reasonable accommodations., • Visual acuity corrected to perform job functions.

Job Description Powerhouse Maintenance Technician Location: Syracuse, NY Industry: Manufacturing & Industrial Maintenance Job Category: Facilities & Equipment Maintenance Compensation Range: $70,761 annually ($34.02/hour) Job Type: Full-Time About the Opportunity: Join a mission-critical team at a manufacturing facility in Syracuse where your work directly supports safe and efficient operations. This is a hands-on role for a skilled technician with powerhouse experience—focused on maintaining high-pressure systems and vital infrastructure. Ideal for candidates local to the area with a mechanical mindset and a background in steam boiler operations. What You’ll Do: • Install, maintain, and repair steam boilers, air compressors, and power generation equipment, • Perform chemical testing to maintain proper boiler water quality, • Troubleshoot and repair analog and digital control systems, • Tear down, rebuild, and reassemble mechanical and electrical units, • Read and work from mechanical, electrical, and plumbing schematics, • Fit and install pipes for systems carrying steam, water, oil, gas, and compressed air, • Maintain high-pressure steam systems across the facility, • Input and manage scheduling within the facility’s energy management system What You Bring: • Minimum 3 years of Powerhouse Technician experience, • Experience with steam boilers, air compressors, and automatic boiler controls, • Proficiency with schematics, blueprints, and troubleshooting systems, • Must reside within 50 miles of Syracuse, NY, • Must be authorized to work in the U.S. without sponsorship, • Manufacturing or industrial plant experience preferred, • Strong mechanical aptitude and critical thinking skills What’s Offered: • $70,761 annual salary (paid hourly at $34.02), • 401(k) with company contributions, • Medical, Dental, and Vision Insurance (effective Day 1), • Paid vacation and holidays, • Employee Assistance Program (EAP)

Job Description Maintenance Repair Technician (CNC) – 2nd Shift Location: Syracuse, NY Industry: Manufacturing & Production Job Category: Manufacturing - Production Compensation Range: $72,508 Job Type: Full-Time About the Opportunity: Join a leading manufacturer in the electrical and power management industry as a CNC-focused Maintenance Repair Technician on 2nd shift. This is a hands-on opportunity at a high-tech facility in Syracuse, where you'll apply both mechanical and electrical expertise to maintain and troubleshoot advanced CNC equipment. Ideal for mechanically inclined professionals with a background in industrial maintenance and machining. What You’ll Do: • Diagnose and repair complex mechanical and electrical issues on CNC and industrial machinery., • Tear down, inspect, and rebuild machines following safety and operational standards., • Troubleshoot electrical systems using ladder logic, schematics, and testing procedures., • Conduct electrical test operations and make necessary adjustments for performance., • Perform preventive and corrective maintenance across various production equipment., • Interpret complex blueprints, manuals, and circuit diagrams., • Communicate abnormal equipment conditions to supervisors., • Support production continuity by ensuring minimal machine downtime., • Use sound judgment when working from instructions, procedures, or schematics., • Work from 2:30 PM to 11:00 PM, Monday through Friday. What You Bring: • High school diploma or equivalent required, • Minimum of 3 years manufacturing maintenance experience, • (or 1 year with a relevant technical degree or military background), • Proficiency in reading ladder logic and industrial motor control schematics, • CNC maintenance and troubleshooting experience required, • Background in machining and electrical systems strongly preferred, • Experience with hydraulics is a plus, • Strong problem-solving skills and ability to work independently What’s Offered: • Base salary: $72,508, • Full benefits package, • Relocation assistance available, • Interview travel reimbursement, • Stable 2nd shift schedule, • Opportunity to work with cutting-edge manufacturing technology Want to Stand Out? We invite candidates to record a short video to showcase who they are. This should feel low-pressure and personal. Video submission link:

Job Description Commercial/Industrial - Boiler/Burner/Controls Specialist - East Syracuse, NY If you like to show off your troubleshooting skills and are a strong customer-focused Technician then we want you! Experienced C&I burner, controls, combustion technicians wanted! We're Blake Thermal Sales & Service, Inc., and we are the official representative of Cleaver Brooks, Camus, and many other C&I equipment manufacturers in the thermal energy industry. We are looking for boiler and burner technicians with a focus on advanced control systems. Don't worry if you're not a "specialist", we are interested in technicians at all levels from apprentices to senior level personnel We offer factory training and certifications, as well as on the job training. Members of our team are all thermal energy & mechanically/electrically minded, self-managed, and extremely customer-focused. OUR COMPANY: Blake Thermal Sales & Service Inc. is the manufacturer's rep for Cleaver Brooks and Camus boilers. Blake Thermal Sales & Service Inc. is a full-service thermal solutions company that supplies engineered products, services, and complete systems. Blake Thermal has a 98-year history of providing an array of products and services supporting steam, hot water for process and domestic heat for commercial, industrial, medical, educational and manufacturing facilities. Headquartered in East Windsor, CT, Blake Thermal maintains multiple locations across New York and New England including East Syracuse, NY. • Sole focus on integrating and supplying engineered products, services, and complete thermal systems, • Longstanding relationship as a manufacturer's representative with a 98-year history Ideal Candidates will be in alignment with Blake Thermal's Core Values: • Customer Focused, • Opportunity is Earned, • Solutions Provider, • Trustworthy, • Driven to Succeed Seeking several Field Service Boiler/Burner/Controls Technicians. Experience is a big plus however we will train apprentices as well. Position primarily requires a positive attitude with solution-oriented approach to problem solving. Must take pride in your work and have ability to work as part of a team. As factory authorized service technicians, we demonstrate the highest levels of professionalism and capability to support our equipment. World-Class customer service and efficiency is our goal! If you are driven to establish a career in this industry but do not have the experience in essential functions listed below; you should still apply if you can meet our responsibilities/expectations and physical demands. ESSENTIAL FUNCTIONS: • Hands-on ability for combustion tuning and analysis as well as troubleshooting skills to determine and adjust a full range of burners from .5 to 30 MMBTU input, • Factory start-up and commissioning of various C&I thermal equipment including hydronic boilers, high- and low-pressure steam systems including firetube and industrial water tube boilers, steam turbines, heat exchangers, snow melt systems, etc., • Boiler room analyses for possible opportunities to improve reliability and efficiency, • Understanding of all types of hot water and steam (high pressure & low pressure) boiler support equipment to include deaerators, feed systems, blow down systems, economizers and waste heat recovery equipment, • Understanding of wiring diagrams, electrical, controls and instrumentation, • Burner upgrades/conversions, • Advanced Burner control upgrades/conversions, • Implementation of energy efficiency measures, • Service vehicle with gas card (once trained and independent), • Company-issued cell phone, • Extensive technical training & professional development opportunities, • Health Insurance including medical, dental, vision, life, ad&d, long term disability, • 401K, • Vacation and paid sick time, • Compensation commensurate with experience, • Perform scheduled & emergency maintenance/repair of the equipment and all other associated equipment, • Perform installation of the equipment at customer sites as well as conducting pre-installation assistance, • Must be available for "On Call" 24 hour emergency service rotation. Additional compensation is provided when "On Call". Overtime/Double-time compensation paid for work performed outside of normal business hours., • Scheduled night and weekend work is sometimes required to meet customer needs. Advance notice will be provided and will show flexibility/consideration whenever possible., • Must have attitude and aptitude to develop a high level of customer service skills, as well as the ability to respond quickly to service calls with good time management and planning, • Must be motivated and fast paced personality with strong work ethic, • Must work effectively with little or no supervision once trained, • Able to read, write and have good oral communications skills in English, other languages a plus, • Computer ability should be proficient for producing required reports, • Must maintain a valid Driver's License to drive rental vehicles & able to pass a DOT physical for driving fleet vehicles as required, a CDL is not required, • Maintain company provided equipment, tools and or fleet vehicle as per company policy., • This role requires ability to pass a pre-hire drug test, pre-hire background check and provide proof of eligibility to work in the U.S., • Requires completion of company provided confined space & lockout/tagout training in order to work safely as part of a team, • Responsible for the prevention and/or mitigation of any environmental impact associated with job-related tasks, accidents, and emergency situations or conditions Blake Thermal Sales & Service Inc. is an equal opportunity and affirmative action employer. We do not discriminate by race, color, gender, sexual orientation/ gender identity, religion, ethnic or national origin, sex, age, disability status, or status as a covered veteran. Blake Thermal Sales & Service Inc. is a proud drug-free workplace.

Job Description General Description: The Maintenance Mechanic is responsible for completing assigned maintenance duties to ensure customer, team member, and vendor satisfaction. The Maintenance Mechanic does this by performing onsite maintenance for production equipment by completing breakdown and preventative maintenance on all filling, packaging, processing, and palletizing equipment, The Maintenance Mechanic will diagnose, repair, and replace industrial equipment in a fast-paced production environment. The Maintenance Mechanic completes these functions in the support of the manufacture of dairy-related products. Job Responsibilities: • Responsible for achieving assigned goals in the area of maintenance, safety, quality, performance, and cost., • Responsible for troubleshooting, maintaining, and repairing mechanical malfunctions to increase productivity and equipment capabilities – including, but not limited to disassembling and reassembling machinery, overhauling gearboxes, replacing bearings/bushings/etc., • Read blueprints, schematics, and diagrams to determine the method and sequence of assembly of a part, machine, or piece of equipment., • Expedite the reentry of down equipment within a manufacturing environment to working conditions., • Repair and calibrate hydraulic and pneumatic assemblies., • Test the performance of electro-mechanical assemblies using test instruments such as multi-meters, volt, and amp meters., • Install electronic parts and hardware, using soldering equipment and hand tools., • Operate, test, program, and maintain complete manufacturing lines such as beverage filling machines, conveyors, and palletizers., • Source parts from vendors when parts are unavailable or have long lead times; order parts in a timely manner to ensure equipment reliability., • Maintain Maintenance Inventory System to ensure accurate inventories., • Communicate effectively between shifts and other departments, including the status of equipment to supervisors/coworkers at end of the shift as well as logbook documentation., • Responsible for complying with GMP’s, SOP’s, corporate and/or plant policies, rules, and regulations., • Responsible for following OEM manuals and executing accurate and precise procedures according to those manuals., • Aids and supports to all areas in the production facility as assigned by supervisor/lead., • Responsible for gaining competence online circuits and learning proper hookups are made in the facility., • Cover breaks and lunches and other staffing needs as assigned by their supervisor/lead., • Compliant with all legal requirements concerning dairy processing and safety on their assigned shift and reports concerning their supervisor/lead., • Work in a safe manner and reports safety concerns promptly to their supervisor/lead and take corrective actions as necessary to ensure a safe environment., • Responsible for reporting food safety problems and initiating action and for supporting SQF by maintaining food safety and food quality., • Ensure work areas are sanitary and strictly adhere to sanitation practices., • Ability to apply basic to complex mathematical concepts such as adding, counting, subtracting, multiplying, dividing, and knowledge of weights and measure, to sufficiently handle job tasks., • Understand and respond appropriately to basic and complex, employee, vendor, and customer inquiries., • Knowledge of and Skilled in the use of Root Cause Analysis, Troubleshooting methodology, 5S, and Lean Manufacturing concepts., • Knowledge of OSHA general safety regulations; PPE, energy control, confined space, chemical safety, fall protection., • Knowledge of boilers, ammonia refrigeration, steam, air compressors, HVAC, sprinkler systems, and electrical systems., • Skills at a mastery level in at least one area of Maintenance including electrical fabrication, refrigeration, welding, controls programming, etc., • Advanced knowledge of common wear points on equipment and follow manufacturer lubrication recommendations., • Have a disciplined aptitude for repair and uptime urgency., • Own an extensive variety of quality tools including SAE and Metric, to perform mechanical repairs on automation equipment., • Read, write, and communicate using the English language sufficient to perform job functions (Other preferences will be given for special language skills when there is a business need)., • Knowledge of the company's mission, purpose, goals, and your role in achieving each of them., • Ability to operate facility equipment as required in assigned area., • Satisfactorily complete all company training requirements., • Minimum GED or High School diploma is highly preferred., • Minimum 3-5 years’ experience within a mechanical automation field, • Technical trade, military training, or technical college strongly preferred., • Experience with VFD’s, conveyors, pumps, pneumatic sanitary valves, as well as pneumatic and hydraulic systems, • Experience with programmable logic controllers, instruments, and controls, • Experience with closed cooling systems, including evaporator towers, water cooling towers, and chillers., • Experience working in a food manufacturing environment preferred., • Responsible for reporting to work at scheduled times and communicating tardiness and absences with the assigned Supervisor/Manager prior to the occurrence., • Responsible for reporting to work in a condition to work., • Responsible for being well-groomed and dressed in a business-and position-appropriate attire at all times including ensuring compliance with GMP dress code standards., • Comply with performance criteria, standards of conduct as contained in company policy, employment procedures, and responsibilities as described in the company handbook., • Maintain a safe work environment at all times and immediately report and take appropriate action to correct a safety concern., • Requires morning, afternoon, and overnight availability any day of the week based on the assigned shift., • Requests to be scheduled off for a specific day require advance notification and approval by the Supervisor/Manager., • Normally protected from weather and temperature changes, possible exposure to hot cold wet, humid, or windy weather conditions does exist., • May be subject to exposure to ingredients used in the manufacture of food products including allergens., • Ability to move throughout all areas of the facility including but not limited to office, production, and warehouse environments. Including the outside perimeter of the building., • Able to wear all necessary personal protective equipment to perform job functions., • Stand and/or sit continuously and perform job functions for a full shift with meal break., • Physically able to stand, bend, stoop, kneel, reach, twist, lift, push, pull, climb, balance, crouch, handle and move items weighing up to 50 pounds without assistance and move objects exceeding 50 pounds with reasonable accommodations.

Job DescriptionSalary: $30-$45 Join One of New York's Top Commercial General Contractors! Gregor Industriesis a leader in commercial construction, known for delivering high-quality projects with a commitment to excellence and innovation. Were seeking a driven and experiencedSite Superintendentto be a part of our growing team of industry professionals. *THIS POSITION REQUIRES TRAVEL TO EACH JOB SITE, AND IS NOT AN OFFICE POSITION Requirements: • Minimum 2+ years experience in Commercial construction in a Supervisory role., • Excellent leadership skills., • AVAILABLE TO WORK NIGHTS AND WEEKENDS., • Ability to travel to various job sites, vehicle or reliable transportation required., • Job sites vary in the Syracuse Area., • A background in carpentry is a plus., • Site Supervising Experience 2+ years required., • Experience and knowledge of reading & interpreting Blueprints., • Excellent communication required, ie: send emails, document RFI's, take photos, take videos. License/Certifications: • Driver's License (Required)., • OSHA 30 (Required)., • Willingness to travel., • SST 62 Proffered., • DOB Proffered. Responsibilities: • Maintain a managerial presence on job sites from the start of the day to the end., • Be able to manage multiple trades on the job site., • Prepare and adhere to an effective schedule for all construction plans., • Analyze and ensure compliance with all construction contract schedules., • Coordinate with subcontractors and consultants., • Supervise the efficient working of all project staff and ensure compliance with all design specifications., • Coordinate with company personnel and clients to resolve all project issues and provide a response to all requests., • Design and implement strategies for contractors., • Develop estimates for all change orders and perform regular tests on all construction activities., • Supervise efficient working of all construction specifications and ensure compliance with all record drawings., • Collaborate with the design team to ensure the accuracy of all documents and maintain cost control on all projects while maintaining quality at all times., • Administer efficient working of all field staff and participate in all meetings with contracts to evaluate progress on a regular basis., • Develop and implement all project control tools and prepare an effective cost report for all construction projects., • Maintain accuracy of data and safety systems., • Handle site management of health and safety programs., • Ensure training of employees, visitors, and contractors in job hazards and safety practices., • Develop and enable employee Safety Training Programs., • Handle material safety data sheets current listing for controlled products on plant site. Job Details: • Full Time., • Night Shifts (not overnight)., • Weekday & Weekend availability., • Overtime., • Medical/Dental/Vision/Pet Insurance: Eligible after 60 days., • Opportunity for promotions in this position.

Job Description Advance your career with the Stark Tech team. We'll shape your future together! Stark Tech is a total optimization provider of facilities and energy solutions. Stark Tech leads the market in providing cutting-edge facilities and energy solutions. We integrate systems, offer energy-efficient equipment and services, and provide building analytics to help customers meet sustainability goals. Our large-scale equipment converts waste to renewable natural gas, reducing greenhouse gas emissions. Additionally, we enhance the utility grid with microgrid and battery energy storage solutions, along with solar development consulting services. Join Stark Tech to be part of the future of energy transformation. What you can expect We believe your well-being and satisfaction are vital for a fulfilling career. We are gritty, employee, and customer-focused. Here are some of the benefits we provide: • Paid Time Off & Holidays, • 401(k) with employer match, • Medical/Dental/Vision insurance, • Health Savings Account (HSA) and Flexible Spending Account (FSA), • HSA employer contribution, • Life and Disability insurance, • Wellness Program (participation incentives), • Employee Assistance Program, • Competitive pay The (HVAC) Controls Technician is responsible for the design, configuration, and operation of complete Temperature Control building control systems, and other low voltage control sub-systems to meet the intent of project requirements. What are we looking for • Associates degree in Mechanical Engineering, Electronics, Electrical Engineering, Information Technology or equivalent., • Two (2) years experience with mechanical and/or electrical engineering systems., • Demonstrated knowledge of the construction or HVAC industry., • Basic networking knowledge., • Demonstrated knowledge of control theory, automatic temperature controls, building automation systems and other building systems., • Demonstrated experience in the integration of low voltage building sub-systems using various industry protocols (i.e LON, BacNet, etc.)., • Operating knowledge of Microsoft office software and working proficiency with handheld devices, such as Smartphones, iPads, etc. Our fast-growing organization offers competitive pay, a positive work environment, and opportunities for career growth within the company. If you're a motivated individual with a sense of accountability, resiliency, and a dedication to providing exceptional customer service, we encourage you to get in touch with us. Job Posted by ApplicantPro

Join Our Team as a Quality Engineer at Superior Metals Manufacturing! About the Role: Superior Metals Manufacturing is seeking a highly motivated and detail-oriented Quality Engineer to join our team in Chittenango, NY. This role is integral to our commitment to manufacturing excellence and customer satisfaction. The Quality Engineer will work closely with internal departments, suppliers, and customer representatives to ensure compliance with quality standards and regulatory requirements. In this role, you will champion our Business Management System (BMS) and Advanced Quality System (AQS), driving continuous improvement initiatives and fostering a culture of quality throughout the organization. Location: Chittenango, NY (On-site) Employment Type: Full-Time Salary: $80,000 - $100,000, but will be evaluated depending on candidates’ knowledge, skills, and abilities. Key Responsibilities: • Serve as the primary quality assurance contact for assigned customers, ensuring proactive communication and resolution of quality-related issues., • Lead and coordinate technical quality efforts across engineering, manufacturing, and purchasing teams to meet and exceed customer expectations., • Conduct and support customer product, system, and qualification audits, ensuring accurate and timely documentation., • Assist in the review and disposition of customer contracts, specifications, purchase orders, and technical documentation., • Develop, implement, and monitor Corrective and Preventative Action (CAPA) plans to address nonconformances and prevent recurrence., • Actively participate in risk assessments, process improvement initiatives, and root cause analysis activities., • Promote and support continuous improvement through lean methodologies, quality training, and cross-functional collaboration., • Maintain up-to-date knowledge of industry standards and technological advancements in quality systems and analytical tools., • Support internal and external audit activities, including AS9100, NADCAP, ISO17025, and A2LA audits., • Contribute to internal quality metrics and reporting to track progress against goals., • Support the development and implementation of operational training structures; ensure all employees complete required training and remain compliant with quality standards and procedures., • Provide input for quote reviews, inspection planning, and development of shop floor instructions., • Bachelor’s degree in Engineering, Quality, or a related technical discipline, OR an equivalent combination of education and experience., • Minimum 2 years of experience in a quality engineering or quality systems role within a manufacturing environment., • In-depth knowledge of quality standards and frameworks, including AS9100, NADCAP, ISO17025, and A2LA., • Proficiency in quality tools and methodologies such as root cause analysis, FMEA, 5 Whys, Pareto analysis, and control plans., • Strong analytical and problem-solving skills, with the ability to interpret complex technical documents and specifications., • Excellent communication skills, with the ability to collaborate effectively across departments and with external stakeholders., • Demonstrated ability to manage multiple priorities in a fast-paced, deadline-driven environment., • Proficiency in Microsoft Office Suite and familiarity with ERP and quality management systems., • 3–5 years of experience in the aerospace, investment casting, or metal manufacturing industry., • Working knowledge of Six Sigma, Lean Manufacturing, or Theory of Constraints (TOC) principles., • Experience with contract review, inspection planning, and regulatory compliance in a customer-facing role., • ASQ certification (CQE, CQA, or similar) is a strong plus., • Key Relationships, • Collaborate with the Quality Manager, Lab Manager, Sales Manager, Process Engineers, and Manufacturing Leaders At Superior Metals Manufacturing, we take pride in more than just what we make—we take pride in how we make it. By joining our team, you'll be part of a dynamic and growing company where innovation, craftsmanship, and quality are at the heart of our culture. We foster an environment of collaboration and continuous learning, where every team member’s voice matters and contributions are valued. Whether you're developing cutting-edge aerospace components or streamlining a process on the production floor, you’ll be making an impact every day. We offer: Innovative Environment: Work in a state-of-the-art melt shop. Collaborative Environment: Work alongside dedicated professionals in a supportive, team-oriented setting. Growth Opportunities: Be part of a company that values continuous improvement and offers career development opportunities. Competitive Benefits: Enjoy a comprehensive benefits package, including health, dental, and vison insurance, retirement plans, paid vacation, bonuses and more. Ready to shape the future of manufacturing quality? Apply today and bring your precision and passion to a team where your impact matters. About Us: Superior Metals Manufacturing (SMM) is a Consolidated Precision Products (CPP) company. SMM at CPP is a part of an industry-leading manufacturer of highly engineered components and sub-assemblies, supplying the commercial aerospace, military and industrial markets with small-to-large “function critical” products. CPP provides its customers with a “total solution” source, taking them from concept to finished product with one of the broadest and most diverse product offerings in the industry. More information about our company can be found at: Sponsorship is not available for this role. Candidates must be legally authorized to work in the US on a permanent and consistent basis without company sponsorship now and in the future. This position requires use of information or access to hardware which is subject to the International Traffic in Arms Regulations (ITAR). All applicants must be U.S. persons within the meaning of ITAR. ITAR defines a U.S. person as a U.S. Citizen, U.S. Permanent Resident (i.e. 'Green Card Holder'), Political Asylee, or Refugee. It is the policy of CPP Corporation to cooperate to the fullest extent with the applicable regulations of the Civil Rights Act and any legislation on Equal Employment Opportunity. CPP Corporation is an Equal Opportunity Employer that recruits, hires, trains, and promotes employees in all job classifications without regard to race, color, religion, age, sex, sexual orientation, gender identity, marital status, national origin, disability, veteran's status, or other legally protected status. EOE/M/F/DISABLED/VETERANS This is a non-management position This is a full time position

Customer Service Specialists work closely with wholesale and retail customers to determine their needs, answer their questions about Sherwin-Williams products, and recommend the right solutions. Store associates Customer Service Specialists are also expected to promptly resolve any customer concerns and ensure maximum client satisfaction as well as stay up-to-date with product features and maintain the high quality and visual standards of the products and store. Customer Service Specialists are tasked with achieving excellent customer service, while consistently meeting the store’s sales goals. Job duties involve contact with customers, which may include minors; and access to cash and other payment methods, electronic equipment, personal information, store merchandise and other items of value, and such access may be supervised or unsupervised. The Company therefore has determined that a review of criminal history is necessary to protect the business and its operations and reputation and is necessary to protect the safety of the Company’s customers, staff, employees, vendors, contractors, and the general public. The individual selected for this role will be expected to work at Store #5377, located at: 6790 East Genesee Street, FAYETTEVILLE, NY 13066 and 5358 located at 4500 West Genesee Street, Syracuse, NY and may be expected to work at stores within a 30 mile radius. This position is eligible for health benefits, such as medical, dental and vision coverage, Flexible Spending Accounts (FSAs), disability coverage, security, retirement and saving benefits, and more. Additional benefits include a generous time away from work package, including personal leave, paid parental leave, medical leave, vacation, holidays, among other benefits. For more information about our benefits, visit At Sherwin-Williams, our purpose is to inspire and improve the world by coloring and protecting what matters. Our paints, coatings and innovative solutions make the places and spaces in our world brighter and stronger. Your skills, talent and passion make it possible to live this purpose, and for customers and our business to achieve great results. Sherwin-Williams is a place that takes its stability, growth and momentum and translates it to possibility for our people. Our people are behind the strength of our success, and we invest and support you in: Life … with rewards, benefits and the flexibility to enhance your health and well-being Career … with opportunities to learn, develop new skills and grow your contribution Connection … with an inclusive team and commitment to our own and broader communities It's all here for you... let's Create Your Possible What is the Process to get Started? Step 1 – Online Application Find the role(s) that interest you on our Careers page: ___ Set aside 15 minutes to create your profile by entering or importing your details from one of our job board partners Step 2 – Digital Interview Upon review of your application, qualified candidates will be invited to complete a digital video interview via HireVue, our interview partner. The interview will consist of a few behavioral based questions You’ll be able to record and complete your video interview anytime, anywhere! While you can complete this video interview on your own schedule, we ask that this step be completed within 7 days of receiving an invitation Step 3 – In-Store Interview Your video interview is reviewed by a member of our Recruitment team and our top candidates are invited to meet with our team in a store, specialty wholesale branch, floorcovering facility or delivery service terminal. At Sherwin-Williams, part of our mission is to help our employees and their families live healthier, save smarter and feel better. This starts with a wide range of world-class benefits designed for you. From retirement to health care, from total well-being to your daily commute—it matters to us. A general description of benefits offered can be found at ___. Click on “Candidates” to view benefit offerings that you may be eligible for if you are hired as a Sherwin-Williams employee. Compensation decisions are dependent on the facts and circumstances of each case and will impact where actual compensation may fall within the stated wage range. The wage range listed for this role takes into account the wide range of factors considered in making compensation decisions including skill sets; experience and training; licensure and certifications; and other business and organizational needs. The disclosed range estimate has not been adjusted for the applicable geographic differential associated with the location at which the position may be filled. The wage range, other compensation, and benefits information listed is accurate as of the date of this posting. The Company reserves the right to modify this information at any time, with or without notice, subject to applicable law. Qualified applicants with arrest or conviction records will be considered for employment in accordance with applicable federal, state, and local laws including with the Los Angeles County Fair Chance Ordinance for Employers and the California Fair Chance Act where applicable. Sherwin-Williams is proud to be an Equal Employment Opportunity employer. All qualified candidates will receive consideration for employment and will not be discriminated against based on race, color, religion, sex, sexual orientation, gender identity, national origin, protected veteran status, disability, age, pregnancy, genetic information, creed, marital status or any other consideration prohibited by law or by contract. As a VEVRAA Federal Contractor, Sherwin-Williams requests state and local employment services delivery systems to provide priority referral of Protected Veterans. Please be aware, Sherwin-Williams recruiting team members will never request a candidate to provide a payment, ask for financial information, or sensitive personal information like national identification numbers, date of birth, or bank account numbers during the application process. • Ensure high levels of customer satisfaction through excellent sales service, • Assist customers in person and over the phone by determining needs and presenting appropriate products and services, • Build productive trust relationships with wholesale and retail customers, • Process sales transactions accurately and consistent with policies and procedures, • Follow and achieve sales goals on a monthly, quarterly, and yearly basis, • Maintain precise work order files and formulas, • Pull appropriate products from the sales floor or warehouse, • Tint and mix products, as needed, to customer specifications, • Stock shelves and set up displays, • Clean store equipment, • Load/unload delivery trucks, • Assist in making deliveries, as needed, • Maintain in-stock and presentable condition assigned areas, • Remain knowledgeable on products offered and discuss available options, • Comply with inventory control procedures, • Suggest ways to improve sales Minimum Requirements:, • Must be at least eighteen (18) years of age, • Must be legally authorized to work in the country of employment without needing sponsorship for employment work visa status now or in the future, • Must be able to read, write, comprehend, and communicate in English, • Must be able to read, write, comprehend, and communicate in Spanish, • Must have a valid, unrestricted Driver’s License, • Must be able, with or without reasonable accommodation, to retrieve material from shelves and floor stacks and lift and carry up to 50 lbs. frequently and up to 70 lbs. on occasion, • Must be willing to work all scheduled hours, which may include evenings and weekends, with or without reasonable accommodation, • If internal to Sherwin-Williams, you must have received at least a “meets expectations” (3) rating on your most recent performance appraisal, • Have at least a High School diploma or GED, • Have at least one (1) year experience working in a delivery, retail, or customer service position, • Have previous work experience selling paint and paint related products, • Have previous work experience operating tinting and mixing equipment

Customer Service Specialists work closely with wholesale and retail customers to determine their needs, answer their questions about Sherwin-Williams products, and recommend the right solutions. Store associates Customer Service Specialists are also expected to promptly resolve any customer concerns and ensure maximum client satisfaction as well as stay up-to-date with product features and maintain the high quality and visual standards of the products and store. Customer Service Specialists are tasked with achieving excellent customer service, while consistently meeting the store’s sales goals. Job duties involve contact with customers, which may include minors; and access to cash and other payment methods, electronic equipment, personal information, store merchandise and other items of value, and such access may be supervised or unsupervised. The Company therefore has determined that a review of criminal history is necessary to protect the business and its operations and reputation and is necessary to protect the safety of the Company’s customers, staff, employees, vendors, contractors, and the general public. The individual selected for this role will be expected to work at Store #5377, located at: 6790 East Genesee Street, FAYETTEVILLE, NY 13066 and 5358 located at 4500 West Genesee Street, Syracuse, NY and may be expected to work at stores within a 30 mile radius. This position is eligible for health benefits, such as medical, dental and vision coverage, Flexible Spending Accounts (FSAs), disability coverage, security, retirement and saving benefits, and more. Additional benefits include a generous time away from work package, including personal leave, paid parental leave, medical leave, vacation, holidays, among other benefits. For more information about our benefits, visit At Sherwin-Williams, our purpose is to inspire and improve the world by coloring and protecting what matters. Our paints, coatings and innovative solutions make the places and spaces in our world brighter and stronger. Your skills, talent and passion make it possible to live this purpose, and for customers and our business to achieve great results. Sherwin-Williams is a place that takes its stability, growth and momentum and translates it to possibility for our people. Our people are behind the strength of our success, and we invest and support you in: Life … with rewards, benefits and the flexibility to enhance your health and well-being Career … with opportunities to learn, develop new skills and grow your contribution Connection … with an inclusive team and commitment to our own and broader communities It's all here for you... let's Create Your Possible What is the Process to get Started? Step 1 – Online Application Find the role(s) that interest you on our Careers page: ___ Set aside 15 minutes to create your profile by entering or importing your details from one of our job board partners Step 2 – Digital Interview Upon review of your application, qualified candidates will be invited to complete a digital video interview via HireVue, our interview partner. The interview will consist of a few behavioral based questions You’ll be able to record and complete your video interview anytime, anywhere! While you can complete this video interview on your own schedule, we ask that this step be completed within 7 days of receiving an invitation Step 3 – In-Store Interview Your video interview is reviewed by a member of our Recruitment team and our top candidates are invited to meet with our team in a store, specialty wholesale branch, floorcovering facility or delivery service terminal. At Sherwin-Williams, part of our mission is to help our employees and their families live healthier, save smarter and feel better. This starts with a wide range of world-class benefits designed for you. From retirement to health care, from total well-being to your daily commute—it matters to us. A general description of benefits offered can be found at ___. Click on “Candidates” to view benefit offerings that you may be eligible for if you are hired as a Sherwin-Williams employee. Compensation decisions are dependent on the facts and circumstances of each case and will impact where actual compensation may fall within the stated wage range. The wage range listed for this role takes into account the wide range of factors considered in making compensation decisions including skill sets; experience and training; licensure and certifications; and other business and organizational needs. The disclosed range estimate has not been adjusted for the applicable geographic differential associated with the location at which the position may be filled. The wage range, other compensation, and benefits information listed is accurate as of the date of this posting. The Company reserves the right to modify this information at any time, with or without notice, subject to applicable law. Qualified applicants with arrest or conviction records will be considered for employment in accordance with applicable federal, state, and local laws including with the Los Angeles County Fair Chance Ordinance for Employers and the California Fair Chance Act where applicable. Sherwin-Williams is proud to be an Equal Employment Opportunity employer. All qualified candidates will receive consideration for employment and will not be discriminated against based on race, color, religion, sex, sexual orientation, gender identity, national origin, protected veteran status, disability, age, pregnancy, genetic information, creed, marital status or any other consideration prohibited by law or by contract. As a VEVRAA Federal Contractor, Sherwin-Williams requests state and local employment services delivery systems to provide priority referral of Protected Veterans. Please be aware, Sherwin-Williams recruiting team members will never request a candidate to provide a payment, ask for financial information, or sensitive personal information like national identification numbers, date of birth, or bank account numbers during the application process. • Ensure high levels of customer satisfaction through excellent sales service, • Assist customers in person and over the phone by determining needs and presenting appropriate products and services, • Build productive trust relationships with wholesale and retail customers, • Process sales transactions accurately and consistent with policies and procedures, • Follow and achieve sales goals on a monthly, quarterly, and yearly basis, • Maintain precise work order files and formulas, • Pull appropriate products from the sales floor or warehouse, • Tint and mix products, as needed, to customer specifications, • Stock shelves and set up displays, • Clean store equipment, • Load/unload delivery trucks, • Assist in making deliveries, as needed, • Maintain in-stock and presentable condition assigned areas, • Remain knowledgeable on products offered and discuss available options, • Comply with inventory control procedures, • Suggest ways to improve sales Minimum Requirements:, • Must be at least eighteen (18) years of age, • Must be legally authorized to work in the country of employment without needing sponsorship for employment work visa status now or in the future, • Must be able to read, write, comprehend, and communicate in English, • Must be able to read, write, comprehend, and communicate in Spanish, • Must have a valid, unrestricted Driver’s License, • Must be able, with or without reasonable accommodation, to retrieve material from shelves and floor stacks and lift and carry up to 50 lbs. frequently and up to 70 lbs. on occasion, • Must be willing to work all scheduled hours, which may include evenings and weekends, with or without reasonable accommodation, • If internal to Sherwin-Williams, you must have received at least a “meets expectations” (3) rating on your most recent performance appraisal, • Have at least a High School diploma or GED, • Have at least one (1) year experience working in a delivery, retail, or customer service position, • Have previous work experience selling paint and paint related products, • Have previous work experience operating tinting and mixing equipment

Job Description HVAC R Service Technician – Residential and/or Commercial Location: Syracuse, NY Company: Cedar Park Group Job Type: Full-Time | Immediate Opening Cedar Park Group is seeking an experienced and detail-oriented Residential HVAC R Service Technician to join our team immediately. If you have a solid technical background, hands-on expertise with HVAC systems, and a focus on safety and efficiency, we want to meet you. What You’ll Do * Perform routine service, diagnostics, and repairs on residential HVAC systems, including furnaces, rooftop units, chillers, boilers, refrigeration and hot water tanks * Install and maintain HVAC equipment with precision, including copper pipe sweating and system calibration * Troubleshoot and service temperature controls, air compressors, backup generators, and high-pressure hot water systems * Conduct preventative maintenance and maintain accurate service records * Ensure all systems meet safety, health, and compliance standards * Work varied schedules that may include nights and weekends What We’re Looking For * 5+ years of HVAC experience (residential or mixed-use preferred) * Skilled in installing and servicing HVAC systems and refrigeration units * Ability to diagnose and repair rooftop units and humidity/temperature control systems * Knowledge of preventative maintenance protocols * Must have own tools (e.g., electric testers, wrenches, screwdrivers, etc.) * OSHA 10 certification required * EPA certification preferred Physical Requirements * Able to lift heavy equipment * Comfortable working in confined spaces, rooftops, and fluctuating temperatures Benefits * Paid Time Off (PTO) * Vacation Pay * Bonus Pay Opportunities * Health Insurance * 401(k) Retirement Plan Why Join Cedar Park Group? At Cedar Park Group, you’re more than just a number. You’ll have a dedicated recruiter supporting you every step of the way—from credentialing to onboarding. We’re committed to your success and career growth, offering excellent benefits and real opportunities for advancement. Join a company that values your skills, your work, and your future.

Job DescriptionDescription: Are you an experienced survey professional looking to advance your career as a Survey Crew Leader in land surveying? Fisher Associates is hiring a Survey Party Chief in the Canonsburg, PA area to lead field survey crews with a strong focus on safety, precision, and project efficiency. In this leadership role, you’ll oversee on-site land survey operations, mentor team members, and ensure timely, accurate, and high-quality survey deliverables across various projects. At Fisher Associates, your surveying expertise is recognized, your professional development is supported, and your work-life balance is truly valued. Whether you're conducting boundary surveys, construction staking, or topographic mapping, you'll play a key role in shaping successful project outcomes and advancing your career. About Fisher Associates Fisher Associates is a multidisciplinary design services firm headquartered in Rochester, NY, with eight locations nationwide. The firm provides civil/site engineering, transportation engineering, electrical engineering, landscape architecture, architecture, planning, environmental, surveying, GIS, construction inspection, precast engineering and construction engineering services to public and private sector clients across numerous markets. Why You’ll Love Working at Fisher • You excel in the field, leading crews and solving challenges outdoors — your expertise drives results where it matters most., • You are empowered to achieve exceptional results through collaboration and ownership., • Your voice matters in our inclusive and transparent culture, where accessible leadership genuinely welcomes ideas and feedback., • Your growth is our priority. We offer clear career paths, tuition assistance, and ongoing learning opportunities to support your development., • You thrive in a culture that celebrates fun and fosters a relaxed, easy-going atmosphere, so you can bring the best of yourself to work every day., • Your journey is shaped by a culture of mentorship, where experienced colleagues guide your growth and you, in turn, inspire others. As a Survey Party Chief, you’ll take the lead on-site—guiding field crews, ensuring safety, and collecting accurate land survey data that supports successful project delivery. Your work will combine leadership, technical precision, and real-time problem-solving in dynamic outdoor environments. • Ensure survey crew safety through hands-on training, daily Tailgate Safety Meetings, and enforcement of Job Safety Analyses (JSAs)., • Lead and mentor field survey staff, fostering high performance and continuous skill development., • Maintain organized field notes, sketches, and survey control documentation aligned with project standards and regulatory requirements., • Collect, verify, and process survey field data using proper naming conventions to ensure clean transitions to office teams., • Coordinate daily with Project Managers and Land Surveyors to set project goals, track survey progress, and quickly resolve field challenges., • Follow client and company field protocols to guarantee survey data accuracy across a wide range of specifications and project types., • Perform control checks, traverse angle closures, and level run validations before submitting data for processing., • Track and document crew timesheets, vehicle use, and equipment condition to optimize daily operations. Your Impact Matters, Your Career Thrives. Work on engaging projects and experience first-hand the positive changes you create in your own community. Engage in diverse and challenging project opportunities that will help you grow and advance your career. We offer competitive salaries and benefits, including: • Medical, Dental & Vision Insurance, • 401(k) Plan, • Company-paid Life and Disability Insurance, • Hybrid Work Schedule, • Generous PTO and Paid Holidays, • Strong Work-life Balance, • Shareholders Program, • Professional Development Opportunities and Reimbursement, • Supplemental Benefits Designed for Total Well-being and Financial Security. Actual compensation may vary based on relevant experience, qualifications/education, and other factors. The salary range is not necessarily reflective of the actual total compensation that may be earned nor promises any specific pay for any specific employee. Salary range excludes monetary value of benefits. Requirements: What You Bring, Your Expertise • High School Diploma or GED required, • Associate’s Degree of applied Science in Surveying, Geomatics or related degree preferred (or equivalent experience), • 3 plus years of experience as a Party Chief, • Experience with data collection survey equipment including Leica GPS, Scanning and Total Station systems highly preferred., • Professional performance standards aligned with Fisher’s Mission, Vision, and Core Values., • Demonstrated high-quality work and ability to problem solve applying critical thinking, and sound judgment to challenges., • Driven to take ownership of your projects, prioritize your tasks effectively, and thrive in a dynamic, fast-paced environment that fosters personal and professional growth., • Highly adaptable and proactive in meeting deliverables and deadlines, • Dedicated to fostering trust and collaboration through integrity, respect, and active listening in client and team relationships., • Have a sense of curiosity, always looking for a better way, and a continuous improvement mindset. The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodation may be made to enable individuals with disabilities to perform the essential functions. • Must be able to lift to 50 pounds at a time., • Must possess a valid driver’s license and drive a company vehicle., • Traveling on a regular basis to project sites located throughout Pennsylvania and New York., • Ability to sit, stand, walk and transverse uneven grounds Fisher Associates is committed to fostering a diverse and inclusive workplace where all individuals are respected, valued, and empowered to thrive. We do not discriminate in hiring or employment on the basis of age, race, creed, color, national origin (including ancestry), religion, gender or sex, sexual orientation (including transgender status, gender identity or expression), pregnancy (including childbirth, lactation, and related medical conditions), disability, reproductive health decision making (including, but not limited to, the decision to use or access a particular drug, device, or medical service), marital status, partnership status, caregiver status, domestic violence victim status, familial status, military status, unemployment status, genetic information (including genetic characteristics), citizenship or immigration status, or any other protected status under federal, state, or local laws.

Job Description • We are hiring immediately for full time and part time FOOD SERVICE WORKER positions., • Location: Upstate University Hospital - 750 East Adams Street, Syracuse, NY 13210 Note: online applications accepted only., • Schedule: Full and part time schedule. Days and hours may vary. Must be able to work every other weekend/holiday. More details upon interview., • Requirement: Prior food service experience preferred. Willing to train. Morrison Healthcare is a leading national food and nutrition services company exclusively dedicated to serving more than 806 hospitals and healthcare systems. Morrison uses the Power of Food to create personalized dining experiences for patients and in their cafés to advance the healing and healthful missions of its clients. Morrison has been serving some of the nation's largest health systems for more than 65 years and leverages culinary, nutritional, and operational expertise to provide consistency and transform the healthcare experience. Morrison has been recognized as one of Modern Healthcare's Best Places to Work in 2020 for the 8th time and was named a Top 125 Training Organization by Training Magazine in 2020 for the 9th time. Glassdoor also named Morrison a 2018 Best Places to Work and CEO Tim Pierce a 2019 Most Admired CEO. Morrison is a Compass One Healthcare operating division within Compass Group and has more than 1,200 registered dietitians, 300 executive chefs, and 21,000 professional food service team members. Job Summary Summary: Prepares, presents and serves food as needed. Essential Duties and Responsibilities: • Performs prep work such as washing, peeling, cutting and seeding fruits and vegetables., • Weighs and measures designated ingredients., • Carries pans, kettles and trays of food to and from work stations, stove and refrigerator in accordance with safety standards., • Stores food in designated areas following wrapping, dating, food safety and rotation procedures., • Cleans work areas, equipment and utensils., • Distributes supplies, utensils and portable equipment., • Utilizes approved food recipes and production standards to ensure proper quality, serving temperatures and standard portion control., • Serves customers in a friendly, efficient manner following outlined steps of service., • Resolves customer concerns and relays relevant information to supervisor., • Ensures compliance with company service standards and inventory and cash control procedures., • Assures compliance with all sanitation and safety requirements., • Full-time and part-time positions are offered the following benefits: Retirement Plan, Associate Shopping Program, Health and Wellness Programs, Discount Marketplace, Identify Theft Protection, Pet Insurance, and other voluntary benefits including Critical Illness Insurance, Accident Insurance, Hospital Indemnity Insurance, Legal Services, and Choice Auto and Home Program Morrison Healthcare is a member of Compass Group. Compass Group is an equal opportunity employer. At Compass, we are committed to treating all Applicants and Associates fairly based on their abilities, achievements, and experience without regard to race, national origin, sex, age, disability, veteran status, sexual orientation, gender identity, or any other classification protected by law. Qualified candidates must be able to perform the essential functions of this position satisfactorily with or without a reasonable accommodation. Disclaimer: this job post is not necessarily an exhaustive list of all essential responsibilities, skills, tasks, or requirements associated with this position. While this is intended to be an accurate reflection of the position posted, the Company reserves the right to modify or change the essential functions of the job based on business necessity. Applications are accepted on an ongoing basis. Morrison Healthcare maintains a drug-free workplace. "We will consider for employment all qualified applicants, including those with a criminal history (including relevant driving history), in a manner consistent with all applicable federal, state, and local laws, including the City of Los Angeles’ Fair Chance Initiative for Hiring Ordinance, the San Francisco Fair Chance Ordinance, and the New York Fair Chance Act."

Job DescriptionLead the Charge: Become the STORE MANAGER at Project LeanNation! Shape the Future with Us: At Project LeanNation, leadership isn't just about overseeing operations; it's about inspiring growth and fostering community connections. As the Store Manager, you are the visionary who drives the business forward, develops your team, and makes a positive impact on the community. Your passion for leadership and community engagement makes you the catalyst for success. Your Leadership Canvas: As the Store Manager, you oversee all aspects of retail store operations and the strategic development of your people and communities. Your key responsibilities include: ● Strategic Leadership: • Identifying growth opportunities and implementing new processes., • Maximizing profitability and setting sales targets., • Ensuring compliance with health and safety legislation., • Modeling best practices for member experience., • Embodying Our Core Values:, • Enthusiasm: Bring energy and passion to the team and clients., • Knowledge: Share expertise and foster a learning environment., • Emotional IQ: Demonstrate empathy and strong interpersonal skills., • nfluence: Positively impact team dynamics and client interactions., • Discipline: Maintain high standards and attention to detail., • Taking full responsibility and accountability for results., • Maintaining statistical and financial records., • Ensuring daily sheets are prepared with all necessary information. ● Weekly Tasks: • Meet with leadership to define goals and identify opportunities., • Evaluate team needs and create the Weekly Game Plan., • Evaluate store finances, hours, and payroll., • Address foreseeable issues or events., • Relay important information to the team., • Post the Weekly Game Plan on Monday and ensure team understanding., • Support Key Leaders and follow up on outstanding tasks., • Prepare for and manage the Level 10 Meeting., • Conduct individual performance reviews., • Track quarterly progress of each team member., • Prepare and analyze information for the Quarterly Meeting. ● Embraces Leadership: • Takes full responsibility and accountability for results., • Leads and coaches people by incorporating store operating principles., • Enthusiasm: Bring energy and passion to the team and clients., • Knowledge: Share expertise and foster a learning environment., • Emotional IQ: Demonstrate empathy and strong interpersonal skills., • Influence: Positively impact team dynamics and client interactions., • Meets or exceeds company goals by managing store financials., • Identifies growth opportunities and implements new processes., • Acts as a community connector., • Oversees local community initiatives. If you're ready to lead, inspire, and make a difference, join us at Project LeanNation. Embrace your chance to be at the forefront of a journey where every step is about community, passion, and unmatched excellence.

Job Description Job Overview: The Medical Assistant provides essential support to healthcare professionals by performing a variety of clinical and administrative tasks. This role involves assisting with patient care, managing medical records, and ensuring smooth daily operations within the medical office or clinic. Key Responsibilities:Clinical Duties: • Patient Care: Assist with patient examinations, including taking medical histories, measuring vital signs, and preparing patients for procedures., • Medical Procedures: Perform routine clinical procedures such as assisting with injections and preparing specimens for laboratory tests., • Patient Assistance: Help patients with mobility issues, and provide support during procedures and treatments., • Infection Control: Follow infection control protocols and maintain a clean and safe environment for patients.Administrative Duties:, • Appointment Scheduling: Schedule patient appointments, manage calendars for healthcare providers, and coordinate referrals and follow-up visits., • Medical Records: Maintain and update patient records in electronic health records (EHR) systems, ensuring accuracy and confidentiality., • Communication: Serve as a liaison between patients and healthcare providers, addressing patient inquiries and concerns professionally.General Responsibilities:, • Equipment Management: Prepare and sterilize medical equipment, ensuring that all tools and instruments are clean and in good working order., • Documentation: Ensure all patient interactions and procedures are documented accurately and in compliance with healthcare regulations., • Compliance: Adhere to all healthcare regulations, organizational policies, and best practices to ensure high-quality patient care., • Customer Service: Provide excellent customer service, creating a welcoming and supportive environment for patients and their families.Qualifications:, • Education: High school diploma or equivalent required. Completion of an accredited medical assistant program preferred., • Certification: Certification as a Medical Assistant (CMA) or Registered Medical Assistant (RMA) preferred., • Experience: Previous experience in a medical assisting role is preferred but not required., • Skills:, • Strong clinical and administrative skills., • Proficiency in using medical office software and EHR systems., • Excellent communication and interpersonal abilities., • Ability to multitask and work efficiently in a fast-paced environment., • Knowledge of medical terminology and basic healthcare procedures.Work Environment:, • Physical Demands: The role involves standing, walking, and occasional lifting of patients or equipment. It may require working in various healthcare settings such as physician's offices or ambulatory outpatient surgical centers., • Work Hours: Typically involves standard office hours, with potential for occasional extended hours based on patient needs and departmental requirements.

Job Description • We are hiring immediately for full time PATIENT DINING ASSOCIATE DIETARY AIDE positions., • Location: Upstate University Hospital - 750 East Adams Street, Syracuse, NY 13210 Note: online applications accepted only., • Schedule: Full time schedule. 3 1/2 day work week. 40 hours per week. More details upon interview., • Requirement: Prior food service experience preferred. Willing to train. Morrison Healthcare is a leading national food and nutrition services company exclusively dedicated to serving more than 806 hospitals and healthcare systems. Morrison uses the Power of Food to create personalized dining experiences for patients and in their cafés to advance the healing and healthful missions of its clients. Morrison has been serving some of the nation's largest health systems for more than 65 years and leverages culinary, nutritional, and operational expertise to provide consistency and transform the healthcare experience. Morrison has been recognized as one of Modern Healthcare's Best Places to Work in 2020 for the 8th time and was named a Top 125 Training Organization by Training Magazine in 2020 for the 9th time. Glassdoor also named Morrison a 2018 Best Places to Work and CEO Tim Pierce a 2019 Most Admired CEO. Morrison is a Compass One Healthcare operating division within Compass Group and has more than 1,200 registered dietitians, 300 executive chefs, and 21,000 professional food service team members. Job Summary Patient Dining Associates work on assigned units in a healthcare facility, and provide services that include helping patients make menu selections, assemble, deliver and pick-up their meal trays. They are part of the caregiving team, responsible for patient safety and satisfaction goals by making sure meals are accurate and delivered at the right time and temperature. Essential Duties and Responsibilities: • Help patients understand their menu selections and work with nursing to ensure sure their orders comply with their nutritional requirements or restrictions., • Work with the caregivers and culinary team to determine menu alternatives for patients with food allergies and sensitivities; cultural, ethnic and religious preferences; or when a patient inquires about additional selections., • Manage tray tickets and assemble meals according to each patient’s menu selection in a timely and accurate manner. Retrieve trays from patient rooms at assigned times., • Complies with regulator agency standards, including federal, state and JCAHO. Adhere to facility confidentiality and the patient’s rights policy as outlined in the facility’s Health Insurance Portability and Accountability Act (HIPAA) policies and procedures., • Follows Hazard Analysis Critical Control Point (HACCP) guidelines when handling food, cleaning work stations and breaking down patient tray line., • Follows facility and department infection control policies and procedures., • Assist dietitians, such as helping monitor patients who cannot eat food through their mouth, are on liquid diets or have a specific calorie count to manage., • Communicate problems or concerns with patients to appropriate personnel in a timely manner, following department procedures., • Complete all daily, weekly or monthly reports as outlined in the Morrison Healthcare policies and procedures., • Comply with federal, state and local health and sanitation regulations, as well as department sanitation procedures., • Performs other duties assigned. Qualifications: • Ability to read, write and interpret documents in English., • Basic computer and mathematical skills., • Full-time and part-time positions are offered the following benefits: Retirement Plan, Associate Shopping Program, Health and Wellness Programs, Discount Marketplace, Identify Theft Protection, Pet Insurance, and other voluntary benefits including Critical Illness Insurance, Accident Insurance, Hospital Indemnity Insurance, Legal Services, and Choice Auto and Home Program Morrison Healthcare is a member of Compass Group. Compass Group is an equal opportunity employer. At Compass, we are committed to treating all Applicants and Associates fairly based on their abilities, achievements, and experience without regard to race, national origin, sex, age, disability, veteran status, sexual orientation, gender identity, or any other classification protected by law. Qualified candidates must be able to perform the essential functions of this position satisfactorily with or without a reasonable accommodation. Disclaimer: this job post is not necessarily an exhaustive list of all essential responsibilities, skills, tasks, or requirements associated with this position. While this is intended to be an accurate reflection of the position posted, the Company reserves the right to modify or change the essential functions of the job based on business necessity. Applications are accepted on an ongoing basis. Morrison Healthcare maintains a drug-free workplace. "We will consider for employment all qualified applicants, including those with a criminal history (including relevant driving history), in a manner consistent with all applicable federal, state, and local laws, including the City of Los Angeles’ Fair Chance Initiative for Hiring Ordinance, the San Francisco Fair Chance Ordinance, and the New York Fair Chance Act."

Job Description • We are hiring immediately for full time and part time COLD FOOD (SALAD) positions., • Location: Upstate Medical University - 750 East Adams Street, Syracuse, NY 13210 Note: online applications accepted only., • Schedule: Full time and part time schedules are available; open availability is preferred. Must be able to work every other weekend/holiday. Hours and days may vary; more details upon interview., • Requirement: Food prep experience preferred. Willing to train., • Perks: Paid holidays, vacations and personal leave! Morrison Healthcare is a leading national food and nutrition services company exclusively dedicated to serving more than 806 hospitals and healthcare systems. Morrison uses the Power of Food to create personalized dining experiences for patients and in their cafés to advance the healing and healthful missions of its clients. Morrison has been serving some of the nation's largest health systems for more than 65 years and leverages culinary, nutritional, and operational expertise to provide consistency and transform the healthcare experience. Morrison has been recognized as one of Modern Healthcare's Best Places to Work in 2020 for the 8th time and was named a Top 125 Training Organization by Training Magazine in 2020 for the 9th time. Glassdoor also named Morrison a 2018 Best Places to Work and CEO Tim Pierce a 2019 Most Admired CEO. Morrison is a Compass One Healthcare operating division within Compass Group and has more than 1,200 registered dietitians, 300 executive chefs, and 21,000 professional food service team members. Job Summary Summary: Cuts delicatessen meats, vegetables and cheeses with slicing machine, knives or other cutters. Prepares and serves sandwiches, salads and other cold food items. Essential Duties and Responsibilities: • Obtains daily production schedule and preparation requirements from Chef., • Prepares sandwich meats, cheeses, condiments and salads using approved production standards to ensure proper quality, serving temperatures and standard portion control., • Stocks and replenishes deli/cold products and condiments following approved merchandising guidelines., • Carries pans, kettles and trays of food to and from workstation, stove and refrigerator., • Stores food in designated areas following HACCP standard wrapping, dating and rotation procedures., • Cleans, sanitizes and maintains counters, work surfaces, refrigeration units and floors in the preparation and serving areas., • Places meat, cheese or vegetables on cutting board and cuts slices to designated thickness. Positions and clamps meat or cheese on carriage of slicing machine. Adjusts knob to set machine for desired thickness. Presses button to start motor that moves carriage past rotary blade that slices meats and cheeses., • Interacts with coworkers to ensure compliance with company service standards, inventory and cash control procedures., • Maintains clean, safe work environment to comply with sanitation, ServSafe and safety requirements., • Full-time and part-time positions are offered the following benefits: Retirement Plan, Associate Shopping Program, Health and Wellness Programs, Discount Marketplace, Identify Theft Protection, Pet Insurance, and other voluntary benefits including Critical Illness Insurance, Accident Insurance, Hospital Indemnity Insurance, Legal Services, and Choice Auto and Home Program Morrison Healthcare is a member of Compass Group. Compass Group is an equal opportunity employer. At Compass, we are committed to treating all Applicants and Associates fairly based on their abilities, achievements, and experience without regard to race, national origin, sex, age, disability, veteran status, sexual orientation, gender identity, or any other classification protected by law. Qualified candidates must be able to perform the essential functions of this position satisfactorily with or without a reasonable accommodation. Disclaimer: this job post is not necessarily an exhaustive list of all essential responsibilities, skills, tasks, or requirements associated with this position. While this is intended to be an accurate reflection of the position posted, the Company reserves the right to modify or change the essential functions of the job based on business necessity. Applications are accepted on an ongoing basis. Morrison Healthcare maintains a drug-free workplace. "We will consider for employment all qualified applicants, including those with a criminal history (including relevant driving history), in a manner consistent with all applicable federal, state, and local laws, including the City of Los Angeles’ Fair Chance Initiative for Hiring Ordinance, the San Francisco Fair Chance Ordinance, and the New York Fair Chance Act."

Job Title: MRI Technologist Location: New York, NY 10032 Start Date: October 27, 2025 Schedule: • Monday to Friday, • Variable Shift: 9:00 AM – 6:00 PM or 10:00 AM – 6:00 PM, • 30-minute unpaid break, • Every other weekend required Pay Rate: • Local: $70 – $75 per hour, • Travel: $82 – $86 per hour Job Summary: We are seeking a skilled and experienced MRI Technologist to join our diagnostic imaging team in New York, NY. This role involves performing high-quality magnetic resonance imaging procedures while ensuring patient comfort, safety, and diagnostic accuracy. Candidates must demonstrate proficiency in imaging systems and workflow tools, as well as current licensing and certifications. Key Responsibilities: • Perform MRI exams in accordance with physician orders and imaging protocols, • Operate MRI scanners and related equipment to produce diagnostic-quality images, • Review patient history and ensure appropriateness of imaging study, • Administer contrast media as required, in compliance with NYS guidelines, • Monitor patient condition and safety throughout the procedure, • Maintain accurate records within EMR, RIS, HIS, PACS, and modality-specific software, • Collaborate with radiologists and healthcare team members to ensure optimal imaging outcomes, • Maintain cleanliness and functionality of MRI equipment, • Follow all safety protocols including MRI zone restrictions and screening procedures, • Adhere to departmental policies, radiation safety regulations, and infection control standards, • Support patient education and address any concerns related to the MRI procedure Required Qualifications: • Education:, • High School Diploma or GED (required), • Graduate of an accredited Radiography Program, • Licensure & Certifications:, • New York State Licensure in Radiography, • Certified by NYS to administer contrast media, • ARRT Certification in:, • Radiography (R), • Magnetic Resonance Imaging (MR), • Maintains continuing education credits per ARRT guidelines, • Experience:, • Minimum 1 year of experience in Diagnostic Imaging, • Recent experience in MRI required, • Proficient in EMR, RIS, HIS, PACS, and MRI modality-specific software Preferred Qualities: • Strong communication and patient care skills, • High attention to detail and technical accuracy, • Ability to work collaboratively in a multidisciplinary team, • Flexible with schedule to accommodate variable shifts and weekend rotation Pride Health offers eligible employee’s comprehensive healthcare coverage (medical, dental, and vision plans), supplemental coverage (accident insurance, critical illness insurance and hospital indemnity), 401(k)-retirement savings, life & disability insurance, an employee assistance program, legal support, auto, home insurance, pet insurance, and employee discounts with preferred vendors

Job Title: Pathologist Assistant Location: Saranac Lake, NY Employment Type: Travel | Onsite | 10-Hour Day Shift | Monday – Friday About the Role: We are seeking a licensed Pathologist Assistant to join the pathology department at a well-established healthcare facility in Saranac Lake, New York. This is a travel opportunity designed for experienced candidates who want to provide hands-on support in a high-performing lab setting. The ideal candidate will be responsible for assisting pathologists with surgical specimen processing, histology, cytology, and autopsy pathology while ensuring proper documentation, safety compliance, and specimen integrity. Key Responsibilities: • Perform surgical pathology, cytology, histology, and autopsy specimen preparation, • Assist pathologists during autopsy and surgical procedures, • Use Laboratory Information Systems (LIS) for accurate patient documentation, • Prepare and stain slides, perform microscopic analysis, and karyotyping, • Ensure compliance with all state licensure and laboratory safety protocols, • Maintain specimen integrity throughout processing stages, • Provide technical support and mentorship to lab support personnel, • Participate in quality control activities and maintain technical expertise through education, • Ensure accurate and timely completion of records and reports Qualifications: • Bachelor’s Degree from an accredited Pathologist Assistant Program (Required), • Valid NYS Pathologist Assistant Licensure (Required), • Minimum of 1 year of experience as a Pathologist Assistant in Surgical Pathology, Histology, Cytology, and Autopsy Pathology (Required), • Strong knowledge of Laboratory Information Systems (LIS) and specimen handling techniques, • Excellent interpersonal, verbal, and written communication skills, • Ability to operate laboratory equipment safely and effectively, • Willingness to work onsite in Saranac Lake, NY for a 13-week travel assignment Why Join Us? • Opportunity to work in a highly regarded hospital environment in upstate New York, • Gain exposure to a wide variety of pathology cases and advanced lab technologies, • Competitive compensation with sign-on and relocation assistance, • Perfect role for Pathologist Assistants seeking travel assignments in the Allied Health sector

Building Automation Specialist / Coordinator (85-100K) We have an excellent direct hire opportunity available for a Building Automation Specialist / Coordinator to join the Facilities Team in Syracuse, NY area. The work schedule is: M-F 7:00AM – 3:30PM. Attraction Points: • Affordable Medical Plans, Employer Paid Vision & Dental Plans, PTO, and Generous Pension Plan., • Excellent job stability., • Great work/life balance. Key duties will include: • Collaborate with the Electrical and Utilities Managers on projects, audits, and system improvements., • Troubleshoot and resolve issues with electrical, electronic, and mechanical systems (air handlers, automated doors etc)., • Coordinate projects and installations with outside vendors and contractors., • Conduct system site visits, analyze performance, and create facility improvement plans., • Review blueprints, operations manuals, and technical documentation to ensure compliance with code and safety standards., • Monitor building management systems, power distribution, and electrical controls to maintain long-term efficiency., • Lead and support staff training and retraining on electrical and electronic systems. Education and Experience: • Bachelor’s degree + 2 years relevant experience, OR Associate’s degree + 4 years relevant experience., • Project coordination experience with contractors and vendors., • Strong troubleshooting skills and ability to develop creative work-around solutions., • Experience with digital automated building management systems, electrical power distribution, and/or automation and electronic control systems (fire alarm, security/nurse call, lighting controls, automatic doors) is preferred. For immediate confidential consideration, submit your resume to:

Job Description The Assistant Restaurant Manager supports the Restaurant Manager in their efforts to develop a team of dedicated people delivering great and friendly guest experiences and profitable top line sales. They assist in the development of Crew and Shift Leaders and fulfill accountabilities assigned by the Restaurant Manager. RESPONSIBILITIES INCLUDE: (but not limited to) • Assist to recruit, hire, onboard and develop employees, maintain agreed upon staffing levels for the projected sales of the restaurant, • Communicate job expectations to employees and ensure all training is completed per company guidelines, • Hold team members accountable for their behavior and performance, addressing concerns promptly, • Create and maintain a guest first culture in the restaurant, • Maintain safe, secure, and healthy environment by following and enforcing safety, food safety, and sanitation guidelines; comply with all applicable laws, • Ensure Brand standards, recipes and systems are executed including Red Book responsibilities, • Help prepare and complete action plans; implement production, productivity, quality and guest service standards, • Review guest feedback and restaurant assessment results and implement action plans to drive system improvements, • Control costs to help maximize profitability, • Adhere to security and cash handling procedures, • Demonstrate competency in weekly inventory process and analysis, • Demonstrate competency in writing effective crew schedules and monitoring labor performance daily, • Execute new product roll-outs including team training, marketing and sampling, • Drive sales goals and track results REQUIREMENTS : • Basic computer skills, • Capable of counting money and making change, • Must be able to lift a minimum of 30 lbs, • Must be able to stand for 6+ hours at a time, • Must be authorized to work in the U.S., • Fluent in English WHAT WE HAVE TO OFFER: We are a family owned and operated business • With 200+restaurants in our network you will have the opportunity to grow internally and learn new skills, • Competitive salary, • Health insurance, • 401k per company policy, • PTO, • Life/disability insurance “With 200+ locations in 6 states, Cafua Management Company is one of the largest private Dunkin Donuts franchise in the US with a People First culture. You are applying to work with a franchisee of Dunkin' Donuts, not Dunkin' Brands, Inc., Dunkin' Donuts or any of their affiliates. If hired, Cafua Management Company will be your only employer” Cafua Management Company is an equal-opportunity employer and complies with all applicable federal, state, and local laws regarding nondiscrimination. We are committed to providing equal employment opportunities to all individuals regardless of race, color, religion, sex, national origin, age, disability, marital status, sexual orientation, gender identity, genetic information, military/veteran status, or any other basis prohibited by applicable law. If you believe you have been discriminated against or have concerns about the company's compliance with EEOC guidelines, please contact our Human Resources department at . We use eVerify to confirm U.S. Employment eligibility.

Job Description Join a team that nourishes life from farm to table! Upstate Niagara Cooperative, proudly owned by 200+ local family farms, is one of America’s largest and most stable dairy cooperatives. Guided by farmer- and employee-led values, we process and market high-quality milk, yogurt, dips, sour cream, cottage cheese, and more under our trusted brands: Upstate Farms®, Bison®, Milk for Life®, and Intense Milk®. Here, you’ll support sustainable farming, strong communities, and the mission to deliver fresh, local dairy to families every day. Job Summary The Assistant Quality Assurance Manager supports the Quality Assurance Manager in overseeing plant-wide Quality Assurance activities to ensure compliance with Upstate Niagara Cooperative Inc. standards and regulatory requirements. The role involves managing Good Sanitation Practices (GSP) and Good Manufacturing Practices (GMP), auditing processes, maintaining regulatory compliance, and overseeing laboratory and sanitation practices. Responsible for overall direction, coordination and evaluation of this unit. Management of the unit and supervision of employees are critical responsibilities. This position also plays a key role on the Food Safety team and serves as a representative of Corporate Quality Assurance at the plant level. Shift Details • Overnight (11:00pm-8:00am) Hours may vary depending on need., • Monday-Friday. Key Responsibilities Quality Plan & Compliance Management • Collaborate with QA Manager and Plant Management to develop and implement a Plant Quality Plan including GMP., • Define and communicate the role of quality across the facility to promote continuous improvement., • Review and audit manufacturing procedures, ensuring compliance with established protocols., • Identify nonconformances and lead corrective action initiatives., • Maintain regulatory compliance with federal and state requirements., • Act as plant liaison during inspections and audits. GMP & Sanitation Oversight and Guidance • Maintain, update, and enforce GMP guidelines., • Validate sanitation practices and conduct regular audits., • Evaluate new sanitation techniques and products., • Assist sanitation department by conducting visual inspections and verifying effectiveness of CIP systems, • Provide coaching and guidance to sanitation supervisor and technicians performing sanitation duties. Product Quality & Documentation • Maintain and review product specifications., • Implement systems to manage product release, hold, and disposition procedures., • Collect, review, and file food safety and quality records according to document control standards., • Prepare customer Certificates of Analysis., • Collaborate with production to assess incoming raw materials and goods., • Work with purchasing to establish quality standards with vendors., • Support the implementation and maintenance of the SQF program., • Address nonconformances related to quality and food safety promptly. Management and Supervision • Manage all plant quality control personnel to assure compliance with both UNC policies and regulatory requirements, • Develop and monitor training programs for Operations, Sanitation, and Quality staff., • Interview, hire, and train employees and appraise employee performance, • Plan, assign and direct work; address complaints and resolve issues. Laboratory & Testing Operations • Supervise lab activities and staff, ensuring appropriate training and scheduling., • Perform laboratory analyses and maintain calibration of testing equipment., • Purchase lab supplies and oversee lab-related data entry and record keeping., • Provide coaching and guidance to lab technicians for continuous improvement., • Prepare and manage customer and regulatory sampling requirements., • Ensure timely and accurate documentation of all testing and quality control results. Qualifications Education • Bachelor’s degree in food, dairy or natural sciences, microbiology, biology, or a related scientific field preferred.Associates degree with 5-7 years related experience and/or training may be considered Experience • Minimum 5-7 years of experience in food manufacturing or quality assurance., • Prior experience with regulatory audits and food safety programs (e.g., SQF) preferred., • Demonstrated excellent management and supervisory experience Skills • Strong knowledge of GMP, GSP, and food safety regulations., • Excellent analytical, organizational, and problem-solving skills., • Proficient in data entry, documentation, and laboratory testing procedures, • Effective verbal and written communication abilities., • Proficiency with Microsoft Office and quality systems software. Competencies • Attention to detail and commitment to quality standards., • Ability to lead and train cross-functional teams., • Adaptability in a fast-paced, regulated manufacturing environment., • Collaborative mindset with strong decision-making capabilities., • Integrity and confidentiality in managing sensitive quality data. Working Conditions (Physical demands) • Willing to work off shifts to support the cleaning & sanitation program., • Willing to travel to UNC facilities to support the development of food safety and quality programs and support third party audits Pay: $70,000 - $90,000 *The salary range indicated in this posting represents the minimum and maximum of the salary range for this position. Actual salary will vary depending on factors including, but not limited to, budget available, prior experience, knowledge, skill and education as they relate to the position’s qualifications, in addition to internal equity. The posted salary range reflects just one component of our total rewards package. Other components of the total rewards package may include participation in group health and/or dental insurance, retirement plan, wellness program, paid time away from work, and paid holidays. Upstate Niagara Cooperative, Inc. is committed to equal employment opportunity for all, without regard to race, religion, color, national origin, citizenship, sex, sexual orientation, gender identity, age, veteran status, disability, genetic information, or any other protected characteristic.

About In the Navy, information technology (IT) plays an important role in everything from electronic mail systems, to shipboard control systems, to Special Intelligence (SI) systems.Navy Information System Technicians (IT specialists) are Enlisted Sailors who engage in a broad range of responsibilit

Job Description Company Profile: Anderson Equipment Company is one of the largest heavy equipment distribution companies in the Northeast. It is a family-owned, private company that has consistently grown and achieved financial success for almost 90 years. Currently in its third generation of family ownership and management, the company spans six states – West Virginia, Pennsylvania, New York, New Hampshire, Vermont, and Maine with 19 branch locations. Job Description Summary: The Parts Counter person will be responsible assisting customers and Anderson branches in fulfilling their specific needs for parts. This will require a thorough understanding of Anderson’s equipment product lines and the parts for each equipment model (make, year, type). Customer Orders • This is a critical function to ensure technicians have correct parts for work orders. Required Qualifications: • High school diploma or equivalent;, • Work Experience in Parts position at Heavy Equipment, Auto, Parts dealerships;, • Proficiency with computers including preparing looking up inventory parts, preparing tickets for filling orders and shipping;, • Demonstrated knowledge of inventory controls, documentation, filling orders, shipping, receiving;, • Professional communication skills to promote parts sales to customers and to resolve issues. Compensation and Benefits: • Compensation depends on location, experience/skills, overtime: $25.00-$32.00 per hour., • Benefits include Medical and Prescription Drugs, Dental, Vision, Life Insurance, STD, LTD, Heath Savings Account, Employee Assistance Program, Paid Time Off (PTO)., • Retirement Savings is a 401K Plan with Match and Profit Sharing contributed by the Company., • The Company supports professional development through career advancement opportunities, transfers to other branch locations, tuition reimbursement, and company-sponsored training programs.

Building Automation Specialist / Coordinator (85-100K) We have an excellent direct hire opportunity available for a Building Automation Specialist / Coordinator to join the Facilities Team in Syracuse, NY area. The work schedule is: M-F 7:00AM – 3:30PM. Attraction Points: • Affordable Medical Plans, Employer Paid Vision & Dental Plans, PTO, and Generous Pension Plan., • Excellent job stability., • Great work/life balance. Key duties will include: • Collaborate with the Electrical and Utilities Managers on projects, audits, and system improvements., • Troubleshoot and resolve issues with electrical, electronic, and mechanical systems (air handlers, automated doors etc)., • Coordinate projects and installations with outside vendors and contractors., • Conduct system site visits, analyze performance, and create facility improvement plans., • Review blueprints, operations manuals, and technical documentation to ensure compliance with code and safety standards., • Monitor building management systems, power distribution, and electrical controls to maintain long-term efficiency., • Lead and support staff training and retraining on electrical and electronic systems. Education and Experience: • Bachelor’s degree + 2 years relevant experience, OR Associate’s degree + 4 years relevant experience., • Project coordination experience with contractors and vendors., • Strong troubleshooting skills and ability to develop creative work-around solutions., • Experience with digital automated building management systems, electrical power distribution, and/or automation and electronic control systems (fire alarm, security/nurse call, lighting controls, automatic doors) is preferred. For immediate confidential consideration, submit your resume to:

Paragon - JobID: 13907409906-NY-Syracuse [Safety Officer / Security Guard] As a Security Officer at Paragon, you'll: Patrol designated areas to prevent and detect security threats; Enforce access control policies and verify identification of personnel and visitors; Monitor surveillance systems and r

About In the Navy, information technology (IT) plays an important role in everything from electronic mail systems, to shipboard control systems, to Special Intelligence (SI) systems.Interested in this role You can find all the relevant information in the description below.Navy Information System Tec

Petroleum Pump Operator Job Duties: Control pumping systems to circulate liquids through a refinery. Operate steam or electric-driven pumps to circulate crude, semi processed, and finished petroleum products, wate

Install, repair, or upgrade fire alarm systems and program control panels for fire alarm systems with the guidance of building plans and electrical layouts. Complete all wiring, connections, and equipment installations ensuring that fire alarm systems are in compliance with electrical and fire codes

Job Description • We are hiring immediately for full and part time FOOD SERVICE WORKER/CASHIER positions., • Location: Upstate University Hospital - 750 East Adams Street, Syracuse, NY 13210 Note: online applications accepted only., • Schedule: Full and part time schedule. Days and hours may vary. Must be able to work every other weekend. More details upon interview., • Requirement: Prior Cashier experience preferred. Morrison Healthcare is a leading national food and nutrition services company supporting more than 1,000 hospitals and healthcare systems across 46 states, many of which are recognized as U.S. News & World Report ranked Top Hospitals and Health Systems. For over 70 years, Morrison has been serving some of the nation’s largest health systems and bringing a culinary, nutritional, and operational expertise that truly transforms the healthcare dining experience. Morrison has more than 1,600 registered dietitians, 1,200 executive chefs, and 31,000 professional food service team members. The company has been recognized as one of Modern Healthcare’s Best Places to Work since 2012. Job Summary Summary: Performs cashiering duties, including general food service work. Maintains sanitation standards in the preparation, service and dining room facilities. Essential Duties and Responsibilities: • Performs prep work such as washing, peeling, cutting and seeding fruits and vegetables. Weighs and measures designated ingredients., • Carries pans, kettles and trays of food to and from work stations, stove and refrigerator in accordance with safety standards. Distributes supplies, utensils and portable equipment., • Stores foods in designated areas in accordance with wrapping, dating, and food safety and rotation procedures., • Cleans work areas, equipment and utensils., • Ensures compliance with sanitation and safety requirements., • Uses approved food recipes and production standards to ensure proper quality, serving temperatures and standard portion control., • Serves customers in a friendly, efficient manner following outlined steps of service., • Interacts with customers and resolves customer complaints in a friendly, service-oriented manner., • Relays relevant information to supervisor., • Performs sales transactions., • Enters sales into the cash register to ensure purchases are accurately recorded., • Makes change, accepts declining balance cards and other acceptable forms of payment., • Issues receipts to customers., • Follows standard procedures for issuing cash refunds., • Responsible for all assigned change funds and cash receipts, ensuring that cash drawer is in compliance with overage/shortage standards., • Replenishes condiments, beverages and general supplies while maintaining service area cleanliness., • Full-time and part-time positions are offered the following benefits: Retirement Plan, Associate Shopping Program, Health and Wellness Programs, Discount Marketplace, Identify Theft Protection, Pet Insurance, and other voluntary benefits including Critical Illness Insurance, Accident Insurance, Hospital Indemnity Insurance, Legal Services, and Choice Auto and Home Program Morrison Healthcare is a member of Compass Group. Compass Group is an equal opportunity employer. At Compass, we are committed to treating all Applicants and Associates fairly based on their abilities, achievements, and experience without regard to race, national origin, sex, age, disability, veteran status, sexual orientation, gender identity, or any other classification protected by law. Qualified candidates must be able to perform the essential functions of this position satisfactorily with or without a reasonable accommodation. Disclaimer: this job post is not necessarily an exhaustive list of all essential responsibilities, skills, tasks, or requirements associated with this position. While this is intended to be an accurate reflection of the position posted, the Company reserves the right to modify or change the essential functions of the job based on business necessity. Applications are accepted on an ongoing basis. Application Deadline: applications are accepted ongoing until all openings are filled for this position. If an applicant is declined due to the position being filled, they may still be considered for future opportunities and are always welcome to reapply. Morrison Healthcare maintains a drug-free workplace. We will consider for employment all qualified applicants, including those with a criminal history (including relevant driving history), in a manner consistent with all applicable federal, state, and local laws, including the City of Los Angeles’ Fair Chance Initiative for Hiring Ordinance, the San Francisco Fair Chance Ordinance, and the New York Fair Chance Act.

Plan, design, and improve components of traffic control systems to accommodate current or projected traffic and to increase usability and efficiency. Study factors affecting traffic conditions, such as lighting or sign and marking visibility, to assess their effectiveness. Prepare work orders for re

Their responsibilities include: Mapping out the network platforms of the future Ensuring the effectiveness of the Navy technologies Helping to develop and deploy information systems, command and control, and space systems Serving as a key part of the Information Dominance Corps in its mission to gai

Carrier Global Corporation, global leader in intelligent climate and energy solutions, is committed to creating solutions that matter for people and our planet for generations to come. From the beginning, we've led in inventing new technologies and entirely new industries. Today, we continue to lead because we have a world-class, diverse workforce that puts the customer at the center of everything we do. For more information, visit corporate.carrier.com or follow Carrier on social media at @Carrier. About this Role Carrier Marine & Offshore Systems has been a global leader in maritime air conditioning and refrigeration technology since we pioneered the first shipboard use of air conditioning. Today, our products are found aboard cruise ships, offshore platforms, and commercial vessels throughout the world. Is working as a Service Engineer in a dynamic organization your passion? Then come and join our Marine Systems group! Carrier Marine & Offshore Systems is responsible for selling air conditioning products and systems for every commercial application from cruise ships to fishing boats, offshore drilling platforms to oil tankers. This position can be worked onsite in Syracuse, NY or worked remotely from Florida or Texas. Key Responsibilities \n • Install, maintain, and repair air-conditioning and cool installations on board of ships and offshore islands in alternating circumstances\n, • Independently perform complex services, repair and maintenance procedures, and commission cool installations\n, • Detects the source of failures and fixes malfunctions of different natures\n, • Manage internal ordering of proper parts to fix technical malfunctions\n, • Perform technical analyses of mechanical and electrical systems\n, • Provide service support and commission new installations in consultation with the owner and/or building team\n, • Perform advanced test procedures\n, • Detect damages on technical installations and submit reports\n, • High degree of domestic and international travel required\n\n Required Qualifications \n • High school diploma or GED\n, • 3+ years of experience with HVAC controls and automation\n, • Travel, including domestic and international (up to or above 80%)\n, • Must be a US citizen\n\n Preferred Qualifications \n • Bachelor's degree\n, • Chiller experience\n, • Experience installing and troubleshooting HVAC equipment\n, • Familiarity with KTA (accelerated corrosion / protective coatings and corrosion prevention)\n, • Familiarity with KTC (exhaust temperature sensors)\n, • Experience with measure-and-control technique, as well as electro technique\n, • Knowledge on the use of relevant applications and automation packages\n, • Ability to solve problems, signal bottlenecks, and anticipate in alternate solutions\n, • Ability to maintain flexibility and anticipate scenarios with customers.\n, • Strong written and verbal communication skills\n, • Ability to deliver high levels of customer service\n, • Creative problem-solving skills and ability to offer unique technical solutions\n, • Available 24/7 to respond to unplanned customer requirements; this includes extended business travel outside of the United States (primarily to cruise ships and ports)\n\n RSRCAR #LI-Onsite Pay Range: $63,500.00-$111,500.00 Carrier is an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, age, disability or veteran status, or any other applicable state or federal protected class. Carrier provides affirmative action in employment for qualified Individuals with a Disability and Protected Veterans in compliance with Section 503 of the Rehabilitation Act and the Vietnam Era Veterans' Readjustment Assistance Act. Job Applicant's Privacy Notice: Click on this link to read the Job Applicant's Privacy Notice

Job DescriptionDescriptionThe HVAC Sales Engineer is responsible for driving profitable growth in our HVAC mechanical systems division. This role focuses on developing and securing projects with strong margin potential while building long-term service relationships with new and existing clients. The ideal candidate will combine technical HVAC expertise with consultative sales skills to deliver comprehensive building HVAC solutions. • Develop and secure profitable HVAC mechanical system projects while meeting quarterly and annual sales targets, • Partner with Property Managers, Builders, and owners to influence construction documents and building HVAC systems., • Create detailed technical proposals including system design, scope of work, and accurate cost estimates, • Provide technical guidance on HVAC design application solutions, • Conduct site surveys to assess existing building systems and recommend improvements, • Stay current with trends, energy codes, and HVAC industry regulations, • Develop and maintain relationships with mechanical contractors and consulting engineers, • Monitor project profitability and manage change orders for active projects, • Provide technical presentations and demonstrations of HVAC control solutions, • Technical Schooling or:, • Bachelor's degree in Mechanical Engineering or related field, • 3+ years of technical sales experience in commercial HVAC systems, • Strong understanding of HVAC mechanical systems, • Proven track record of meeting sales targets in a technical environment, • Excellent project estimation and scope development skills, • Experience with construction documents and processes, • Knowledge of Project Management, • Familiarity with ASHRAE standards and building codes, • Experience in design-build HVAC projects

Job Description Job Description: Isaac Heating & Air Conditioning is seeking a Project Manager to support our Commercial Install division in Syracuse, NY. The purpose of this position is to use the skills and experience to manage construction projects at an advanced level. This individual will operate as part of a team to make project decisions and ensure proper communication and coordination with field staff and clients. Summary: For over 75 years, Isaac Heating and Air Conditioning has worked diligently to meet the changing heating and air conditioning needs of homeowners and businesses in Upstate and Central New York. Isaac is one of the nation's largest privately held HVAC/R contractors and services over 35,000 clients a year. Creating an enjoyable experience met with anticipation results in an environment where our team, clients, and community can comfortably grow, prosper, succeed, and improve their quality of life. Isaac partners with leading HVAC and plumbing companies throughout the United States, providing the support and resources of a large national company. Responsibilities: • Perform any and all functions necessary to run and manage multiple construction projects, • Maintain extensive knowledge of HVAC/plumbing systems, commercial and mechanical piping and ductwork., • Responsible for training and direction of Jr. Project Managers and Commercial Field Staff, • Lead completion of multiple projects accurately and on time., • Adhere to all company safety policies and procedures. Job Qualifications: • 5-10 years of project management experience preferred, • Valid Driver’s License and vehicle, • OSHA 10-hour Certificate, • High School diploma or equivalent, • Coursework or experience related to HVAC, plumbing, construction management or mechanical engineering is preferred, • Associates or bachelor’s degree in HVAC, plumbing, construction management or mechanical engineering is preferred Competencies: • Results Orientation: ability to understand objectives to be accomplished, develop a plan to achieve them and deliver timely results., • Interpersonal Relations: establishes and maintains effective working relations with employees and others within and outside the organization., • Innovation: knowledge of approaches, tools and techniques for promoting creative, original thinking and applying it to existing and emerging situations., • Self-Development: looks for opportunities to increase knowledge, works to increase responsibility, strives to achieve personal goals., • Directing & Controlling: ability to create a motivating climate, achieve teamwork, train and develop, measure work in progress, take corrective action., • Internal Controls: knowledge of and ability to create, implement, evaluate and enhance internal control processes., • Strategic Thought: works to establish and articulate vision, shows creativity when defining solutions. What can we offer you? • Competitive base pay, • Medical, Dental, and Vision insurance, • 401k retirement plan with company match, • Paid Vacation and Sick Time The starting base salary range for this position is $70,000 - $85,000 annually, plus performance-based bonuses. This is the range of the base pay only, it does not include other components that make up the total compensation package of the position. If offered a position, your total compensation package will be determined by experience, location, skills, and/or education, which may result in a total compensation package that falls outside of the provided range. Isaac Heating & Air Conditioning (subsidiaries and affiliates) is an Equal Opportunity Employer committed to diversity and inclusion in the workplace. All qualified applicants will receive consideration for employment without regard to sex, race, color, age, national origin, religion, physical and mental disability, genetic information, marital status, sexual orientation, gender identity/assignment, citizenship, pregnancy, or maternity, protected veteran status, or any other status prohibited by applicable national, federal, state or local law.

Solid production skills; familiarity with studio audio equipment and digital systems like Audio Vault and RCS Master Control. Audacy is a leading multi-platform audio content and entertainment company, known for its exclusive, premium audio content. The Block features songs and artists that are syno

Job Description Software Engineer Description Our client develops epigenetic biomarker technologies for neurological conditions including mild traumatic brain injury, autism spectrum disorder, and Parkinson’s disease, as well as a platform diagnostic of solutions for COVID-19. We work with top academic institutions, medical researchers, and engineers to translate breakthrough findings into thoughtfully developed and scientifically sound assessment applications. Job Scope Working within a cross functional team, primary responsibilities include: â—? Contribute to architecture design and technology adoption discussions â—? Define, design and develop new applications and features â—? Analyze and improve system performance â—? Engage with team development practices, including code reviews and documentation â—? Adhere to company quality assurance and confidentiality protocols Qualifications â—? Bachelor's degree in Computer Science, Information Science or demonstrated equivalence in work experience â—? 1-3 years professional experience as a software developer â—? Proficiency with Javascript and Node.js â—? Proficiency with Python â—? Object Oriented design concepts/patterns â—? Web protocols, RESTful API design and implementation â—? Relational databases : MySQL and/or PostgreSQL â—? Testing: Unit, Regression, Integration, Load, User â—? Familiarity with Git and version control workflows â—? Knowledge of software security best practices â—? Comfortable learning new languages and frameworks â—? Excellent communicator â—? Preferred - Angular Experience â—? Preferred - Experience with the AWS services â—? Preferred - Experience with NoSql databases â—? Preferred - Linux administration experience â—? Preferred - Experience with HIPAA compliant systems/policies Culture Our client holds these values in an equal to our technical acumen: â—? Learning over expertise â—? Substance over style â—? Taking ownership of work â—? Embracing failure, but learning from the experience â—? Regular and open communication being paramount to success

Job Description Senior Software Engineer Description Our client develops epigenetic biomarker technologies for neurological conditions including mild traumatic brain injury, autism spectrum disorder, and Parkinson’s disease, as well as a platform diagnostic of solutions for COVID-19. They work with top academic institutions, medical researchers, and engineers to translate breakthrough findings into thoughtfully developed and scientifically sound assessment applications. Job Scope Working within a cross functional team, primary responsibilities include: â—? Lead architecture design and technology adoption discussions â—? Define, design and develop new applications and features â—? Analyze and improve system performance â—? Share expertise and help teammates sharpen their technical skills â—? Engage with team development practices, including code reviews and documentation â—? Adhere to company quality assurance and confidentiality protocols Qualifications â—? Bachelor's degree in Computer Science, Information Science or demonstrated equivalence in work experience â—? 5+ years professional experience as a software developer â—? Javascript/Node.js and/or Python expertise â—? Object Oriented design concepts/patterns â—? Web protocols, RESTful API design and implementation â—? Experience with the AWS services â—? Relational databases : MySQL and/or PostgreSQL â—? Testing: Unit, Regression, Integration, Load, User â—? Familiarity with Git and version control workflows â—? Knowledge of software security best practices â—? Excels with learning new languages and frameworks â—? Excellent communicator â—? Preferred - Angular â—? Preferred - Experience with Graph Databases â—? Preferred - Experience with DynamoDB â—? Preferred - Linux administration experience â—? Preferred - Experience with HIPAA compliant systems/policies Culture Our client holds these values in an equal to our technical acumen: â—? Learning over expertise â—? Substance over style â—? Taking ownership of work â—? Embracing failure, but learning from the experience â—? Regular and open communication being paramount to success

Job Description General Description: The Aseptic Filler Operator is responsible for completing assigned production duties to ensure customer, team member, and vendor satisfaction. The Aseptic Filler Operator does this by cleaning and operating Tetra Pak’s aseptic primary packaging equipment in a manner that ensures its optimal performance. The Aseptic Filler Operator must also ensure that all GMP, SOP, HACCP, and Food Safety requirements are satisfied at all times. The Aseptic Filler Operator completes these functions in the support of the manufacture of dairy and non-dairy products. Job Responsibilities: • Set up, clean, sterilize, operate, and monitor aseptic filling equipment using standard operating procedures., • Set up, shut down, and clean ancillary equipment such as Domino printer and check weigh systems., • Operate and monitor equipment while completing all required documentation and scheduled quality checks., • Ensure machine is supplied with sufficient raw materials to complete daily production orders. In addition, ensure all raw materials used to make finished good inventory are properly scanned in accordance with standard procedures., • Load reels of packaging material into machine using heavy lift equipment. Ensure that the correct packaging materials are being used for product being produced., • Monitor systems using human machine interface (HMI) screens and react accordingly to all status displays and alarms., • Perform intricate system checks on filler and its subsystems. Log results and make adjustments as necessary., • Conduct packaging integrity tests using established procedures. Take corrective action in the event of out-of-specification packaging materials., • Monitor and maintain supply of hydrogen peroxide (H2O2) to filling equipment to ensure articles of production are sterile., • Monitor your assigned equipment for quality of production. Notify Operations Manager or designate of problems., • Track and document equipment downtime using Overall Equipment Effectiveness (OEE) log., • Complete cleaning checklist once line has completed production orders and prepare equipment for next production run., • Maintain sanitation and cleanliness of immediate area. Use personal protective equipment when handling chemicals., • Perform basic troubleshooting of equipment in accordance with established procedures. Utilize equipment manuals, in-house resources, and online resources to troubleshoot equipment problems., • Multi-task, prioritize, and manage work without extensive supervision., • Effectively communicate with production supervisor and processing department to resolve daily production problems., • Assess, escalate, and communicate to management, in a timely manner, any known issues that may adversely affect production, quality, and/or safety., • Understand how to use Lockout-Tagout (LOTO) procedures and do so when necessary and appropriate., • Use, apply, and adhere to 5s standards in your work area., • Promote a continuous improvement environment by supporting and completing daily tasks as assigned by management., • Promote and provide excellent customer service with all internal and external customers., • Promote a safe and harmonious work environment and adherence to company policy and procedures., • Maintain compliance with S.Q.F. certification., • Ability to apply basic to complex mathematical concepts such as adding, counting, subtracting, multiplying, dividing and knowledge of weights and measure, to sufficiently handle job tasks., • Read, write, and communicate using English language sufficient to perform job functions (Other preferences will be given for special language skills when there is a business need)., • Knowledge of company's mission, purpose, goals and your role in achieving each of them., • Ability to operate facility equipment as required in assigned area., • Ability to work within a precision team of highly trained individuals, • Ability to identify what needs to be done and take action after being asked., • Ability to have attention to detail and coordinate various activities simultaneously., • Ability to complete assigned tasks., • Satisfactorily complete all company training requirements., • Minimum of GED or High School Diploma is preferred, • 1 year or more experience in manufacturing, • Responsible for learning, cleaning, and operating assigned equipment., • Responsible for meeting department productivity standards., • Maintains a positive and respectful attitude., • Communicates regularly with supervisor about job-related issues., • Demonstrates flexible and efficient time management, including the ability to prioritize workload and coordinate break times to ensure continuous operation of assigned equipment., • Responsible for reporting to work, at scheduled times, in a condition to perform duties., • Responsible for being well-groomed and dressed in assigned uniform at all times., • Comply with performance criteria, standards of conduct as contained in company policy, employment procedures and responsibilities as described in the company handbook., • Maintain a safe work environment at all times and immediately report and take appropriate action to correct a safety concern., • Expected to immediately report equipment/tool/building damage to plant leadership., • Requires morning, afternoon, and overnight availability any day of the week based on assigned shift., • Requests to be scheduled off for a specific day must be approved in advance by Manager., • Normally protected from weather and temperature changes; possible exposure to hot, cold, wet, humid, or windy weather conditions., • May be exposed to ingredients used in the manufacture of food products including allergens, • Ability to move throughout all areas of the facility including but not limited to office, production, and warehouse environments. Including the outside perimeter of the building., • Able to wear all necessary personal protective equipment to perform job functions., • Stand and/or sit continuously and perform job functions for a full shift with meal break., • Physically able to stand, bend, stoop, kneel, reach, twist, lift, push, pull, climb, balance, crouch, handle and move items weighing up to 50 pounds without assistance and move objects exceeding 50 pounds with reasonable accommodations., • East Syracuse The wage range for this role considers the wide range of factors that are considered in making compensation decisions including but not limited to skill sets; experience and training; licensure and certifications; and other business and organizational needs. At Byrne, it is not typical for an individual to be hired at or near the top of the range for their role, and compensation decisions are dependent on the facts and circumstances of each case. A reasonable estimate of the current range is $24.50 to $34.00.

Job Description Hidden Level is transforming airspace safety with innovative, scalable drone detection and airspace technology. We provide real-time, actionable data to enhance security across various environments. As we expand, we're looking for a Software Engineer for Summer 2026. As a Software intern at Hidden Level, you will learn about drone detection, distributed sensor networks, and how to develop and maintain the software tools needed to simulate, analyze, and monitor such systems. You’ll leverage your strong analytical skills and passion for problem solving and get hands-on experience with front and backend web development. Location: This position is onsite in the Syracuse, NY office. As a Software Engineering Intern, you will… • Create software tools and applications that directly impact the team’s ability to analyze, monitor, and control Hidden Level’s distributed sensor networks., • Learn about the exciting challenges in drone detection and tracking., • Work in a small, dedicated team passionate about solving challenging problems and delivering results., • Document and clearly communicate designs to other engineers., • Test and validate software to ensure proper and bug free operation., • Participate in collaborative design and code reviews. Required Qualifications: • Enrolled in an accredited degree program majoring in Computer Engineering or Computer Science., • Completed Sophomore year or greater by Summer 2026., • A minimum grade point average of 3.4. Recent transcript is required with application (unofficial transcripts are acceptable), • Ability to work in a fast-paced environment and overcome technical challenges through teamwork and collaboration., • Strong desire to learn and great communication skills., • Comfortable working in both Linux and Windows Operating Systems., • Some experience working in Python or JavaScript., • Must be a U.S. Citizen, • Ability to travel up to 10% Salary Range: The anticipated salary range for this position based out of Syracuse, NY is estimated at $23.00 to $27.00 an hour. Please note that the salary information is a general guideline only. Hidden Level considers factors such as (but not limited to) scope and responsibilities of the position, candidate's work experience, education/ training, key skills as well as market and business considerations when extending an offer Equal Opportunity Employer: Hidden Level is an Equal Opportunity/ Affirmative Action employer. All qualified individuals are encouraged to apply and will be considered for employment without regard to race, color, religion, national origin, sex (including pregnancy), sexual orientation, gender identity, age, veteran, disability status, or any other federal, state, or locally protected category. Security Note: Due to the nature of Hidden Level’s technology, only U.S. citizens can be considered for this position. #LI-DNI

Job DescriptionSalary: $31.46-$34.48 Who is CenTrio? CenTrio is a fully integrated, innovative and sustainable energy services provider to a wide range of industries such as higher education & healthcare campuses, cities, and communities. It serves more with utility infrastructures serving more than 170+ million square feet of space and operations in 10 cities across the United States and growing. In each community, the company operates highly efficient and innovative utility infrastructures that produce and distribute electricity, steam, hot water and/or chilled water to customer buildings and campuses. Customers connected to these systems enjoy multiple benefits including reduced operating costs, lower emissions and unmatched reliability. CenTrio is a wholly owned subsidiary of a global Infrastructure Investment Consortium with unmatched financial wherewithal and manages a portfolio of long-life, high quality infrastructure assets with high barriers to entry that generate stable and growing cash flows. Job Summary The Operator will be a key member of the Companys Operations team, reporting directly to the Operations and Maintenance Manager. The group operates under a flat structure, and the successful candidate will have regular visibility and direct access to the Director of Operations. The successful candidate will be a critical member of the team, ensuring the successful execution of providing our customers with steam and chilled water on a 24/7/365 basis. Operators work 12-hour shifts alternating every two weeks between days and nights and include weekends. The successful candidate will be expected to work well as part of a team, be a self-starter that enjoys working in a fast-paced environment, have strong commitment to deadlines and team, is process oriented with a high sense of ownership in their work, possesses a high degree of intellectual curiosity, and has a superior knowledge of steam and chilled water systems. Core Responsibilities • The Operator will perform all duties as assigned - Operates, maintains, and troubleshoots equipment of a steam and chiller plant and the distribution systems, • Works with management and peers to Identify and scope out opportunities to maximize production, minimize operating costs and eliminate downtime, • Maintains proper documentation, including operating logs, maintenance records and safety & environmental reports, • Keeps Manager, control room and other operators and peers are fully informed of unusual plant conditions and current job progress as the job relates to facility operations when assigned on-shift and transitioning shift., • Commitment to following all applicable company and client policies, procedures and work rules, and modeling appropriate actions and behaviors, • Participates in training on operating policies and procedures, • Performs chemical tests on boilers, condensate and cooling water and adjust to designated test levels, • Regenerate softeners, • Work in confined spaces, such as boilers, vaults and work from ladders, scaffolds, catwalks, etc., • Transferring chemicals into storage tanks, • Monitors the plant control system via computer screens and equipment gauges, • Perform continuous improvements on the appearance of the plant facility including snow removal as needed., • Additional duties include, but are not necessarily limited to starting and stopping plant equipment as needed; diagnosing and correcting problems in equipment and auxiliaries; changing oil, lubricating bearings and filling station logs, receiving deliveries Working Style to Be Successful in This Role: • Highly analytical with a keen attention to detail, • Demonstrates exceptional initiative and execution skills, • Strong oral and written communication abilities, • Collaborative with excellent interpersonal skills, • Capable of developing and maintaining positive relationships internally and externally, • Adapts quickly in a dynamic, complex, and fast-paced environment, managing changing priorities effectively, • Delivers high-quality work with speed and accuracy, • Self-motivated and proactive, able to work independently with minimal supervision Professional Experience & Knowledge: • Undergraduate degree with relevant technical discipline with 1 year of experience in operating and/or maintaining of combined or simple cycle power plant or other heavy industrial energy plant or High School Diploma with 3 years plant experience, • Individuals having served in the United States Navy for a period of 4 (four) or more years as a boiler technician, machinist's mates, or engineering lab technicians will be considered eligible by the company for a Shift Operator position., • Knowledge of the purpose and function of electronic and pneumatic control panels, and ability to read and interpret charts, tables, measuring equipment, and gauges are required, • Highly analytical with great attention to detail, • Collaborative and interpersonal skills, • A process-focused individual with a passion to drive and deliver effective change, • Self-motivated and proactive, with respect to both managing workload and professional development, • Ability to work in a dynamic, complex, fast-paced environment, to adapt quickly and to manage changing priorities Physical Requirements: • Must be able to work in tight spaces and elevated positions: twisting, turning, bending, and holding arms at / above the head are all common movements; able to lift up to 50lbs., • Requires sitting at computer screens for long periods of time, • Capable of operating heavy equipment such as a forklift and variety of hand and power tools, • Must be able to clearly see and differentiate all colors, • Must be able to maintain standard threshold of hearing to safely perform job duties, • Must have good eyesight, hearing and manual dexterity, • Wear all types of PPE including hearing protection, eye protection, all types of hand protection, steel toe foot wear, head protection, wear fall-protection, half-face and full-face respirators Conditions of Employment: • Valid New York State Drivers License, • Only authorized employees are permitted to use company vehicles, this includes Industrial trucks (forklifts, scissor lifts, etc.) and electric vehicles/golf carts. To be an authorized employee, you must be at least 21 years old, hold a current valid State Drivers' license and demonstrate a clean driving record. The driver must be on an approved list for company insurance purposes. Your driving record will be screened as part of the pre-employment process and annually in December., • All certifications/licenses must be up to date, • CenTrio strives to create a culture of health and wellness. As of December 1, 2021, and consistent with applicable state law, CenTrio will decline to hire individuals who use nicotine products. (WASHINGTON, COLORDAO, MICHIGAN, and TEXAS) Why Join CenTrio? CenTrio offers a dynamic and friendly work environment, dedicated to nurturing a top-notch team culture! Additionally, CenTrio offers an array of fabulous benefits and perks. • Medical Benefits first day of hire, • Medical, dental, vision, Life & AD&D benefits, • Option of supplemental Life & AD&D benefits, • Company paid High-Deductible Healthcare Benefit Plan, • 401k plan with % match, • Training Opportunities and career progression, • Competitive salaries that reflect the value of skills and experience, • Dynamic and friendly work environment in a rapidly expanding industry with a national presence, • Remote, Hybrid, and In Office schedules available dependent on job responsibilities, • 24-hour Employee Assistance Program/Hotline, • Corporate discounts (Travel, Entertainment, Home, Auto, Apparel, Health and Wellbeing, and other various retail options) Health, Safety & Environment (HSE) CenTrio maintains a steadfast commitment to a proactive safety culture, with HSE being a collective responsibility throughout the organization. Your HSE accountability also encompasses: • Promote, ensure, and maintain a safe and healthy environment for your fellow workers and yourself so that everyone goes home injury-free, • Work in compliance with the provisions of the Occupational Health and Safety Act, Industrial Regulations, Environmental Protection Act and Regulations and HSE policies, programs, and procedures, • Responsible for identifying and reporting workplace HSE hazards and concerns to your supervisor immediately and providing solutions (if aware of any) to address these concerns as requested, • Immediate reporting of all work-related injuries/illness to your supervisor, • Adhere to various PPE requirements of the position which may include hearing protection, eye protection, hand protection, steel toe footwear, head protection, fall-protection, respirators (half-face and full-face) DISCLAIMER The preceding position description is intended to provide the general nature and level of work to be performed by employees within this classification. It is not intended to be a detailed description of the position or be interpreted as a comprehensive listing of all duties, responsibilities, and qualifications required for this position. DIVERSITY STATEMENT We know that our greatest strengths come from the people who make up our team. CenTrio is committed to the creation and nurturing of a diverse community of individuals through inclusive excellence. Diversity involves recognizing the value of differences and the inclusion of all members of the community including those that experience discrimination or under representation. This is a core value of the organization as we strive for a culturally diverse work force that reflects the multicultural nature of the nation and our world and brings unique strengths and abilities which contribute to CenTrio.

Job Description United Radio is an employee-centric organization. We are building a team of people who share core values of positivity, exceptional work ethic and a commitment to working smarter to get the job done. With over 100 years in the industry with a reputation for technical expertise and the ability to offer customized solutions, United Radio delivers a variety of applications across a diverse mix of over 40 end markets in the US. United Radio’s headquarters are in Syracuse, NY with a secondary location in Peachtree City, Georgia. Summary Become part of the world standard in electronics remanufacturing by performing software updates, replace components, and test electronic modules to ensure complete repair on the latest electronic technologies. Full-time, Monday-Friday, 8:30am-5:30pm. $16.50-$18.50 an hour Essential Duties and Responsibilities include the following. Other duties may be assigned. • Some soldering of SMT (Surface Mount Component) chip components may be required., • Performs quality control test, manual or automated, on unit to the specification of the manufacturer., • Promote and adhere to United Radio’s Core Values., • Comply with United Radio's policies and procedures, and quality systems. To perform this job successfully, an individual must be able to perform each essential duty satisfactorily. The requirements listed below are representative of the knowledge, skill, and/or ability required. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. Education and/or experience • Excellent organizational skills and attention to detail., • Excellent written and verbal communication skills., • Basic knowledge of the Microsoft Office Suite or similar software., • Basic understanding of mathematical concepts., • Define problems, collect data, establish facts, and draw valid conclusions., • Ability and desire to learn new skills., • Detail oriented., • Ability to work independently as well as with a team., • Prioritize duties and responsibilities appropriately. United Radio is proud to be an equal opportunity workplace free from discrimination and harassment. We seek to recruit and retain the most talented people from a diverse candidate pool and all qualified applicants will receive consideration for employment without regard to race, color, religion, sex, national origin, disability status, protected veteran status, or any other disability protected by law. All employment is decided based upon qualifications, merit, and business need.

Job DescriptionSalary: $57,000 - $65,000 As an entry level staff accountant in our Audit Department, you will begin laying the foundation for a rewarding career. You will work on various teams conducting audits, reviews, compilations and other assigned tasks. Under close supervision, Audit Staff Accountants apply their technical knowledge to assess risks, evaluate our clients internal control structure, perform testing to identify and resolve accounting or reporting issues, and draft financial statements. This position has a target start date of October 2025, an earlier start date during the summer of 2025 may be determined based upon individual circumstances. Some of your responsibilities will include: Expertise • Preparing and organizing work papers and conducting self-review of work., • Organizing facts, analyzing and interpreting information., • Developing an understanding of our Firm's accounting systems, policies and procedures and technical resources. Client Service Excellence • Taking responsibility for service quality, thoroughness and accuracy., • Demonstrating an ability to learn and a basic understanding of GAAP. People Management/Relationships • Working effectively and building relationships with team members., • Proactively communicating with direct supervisor and learning to communicate with clients., • Seeking feedback to learn and develop in role. Requirements: Qualified candidates should have excellent communication skills, self-confidence, and be self-motivated and capable of working productively in a professional environment. You must be conscientious, detailed-oriented and have excellent analytical and organizational skills. You must hold a Bachelor degree in Accounting/with 150 credit hours or an MBA or Masters degree. A basic knowledge of spreadsheet and database applications is required; and experience with financial/accounting software applications is a plus. Internship assignments involving auditing or tax preparation experience is also a plus. Our Benefits: We offer a competitive salary, career development program, unlimited (self-managed) time off program, paid holidays, 401(k) plan with firm matching and profit-sharing contributions, employer parking benefit, and a variety of health and welfare plan options. There is a difference among accounting firms. We invite you to experience it firsthand! Firley, Moran, Freer & Eassa, CPA, P.C. (FMF&E) is proud to be one of the leading certified public accounting firms in CNY. Over the past 40 years, we have grown our Firm organically while always emphasizing the importance of working together to get the job done. We stay dedicated to what we do best, and it shows in our work. We are dedicated to our clients and community, and serve locally and nationwide providing audit, accounting, tax and management consulting services. Our clients include construction contractors, credit unions, energy (independent power producers), professional service organizations, manufacturers, and wholesalers and distributors. Firley, Moran, Freer & Eassa is an equal opportunity employer Privacy Policy SMS Privacy Policy SMS Terms

Job Description Description: Culligan is seeking an experienced Regional Manager to oversee our business operations and Store Branches in the Northeast South region. The Regional Manager is responsible for leading and managing daily operations through general managers to deliver best in class employee and customer facing metrics/experience and achieve business goals and maximize profitability. As Regional Manager your duties also include guiding/growing staff in your region, setting performance objectives, evaluating, ensuring regulatory and company standards are upheld, and optimizing operational/financial performance. To be successful as a Regional Manager, you should be able to set a vision/strategy for your region, lead/manage/grow other leaders/branch managers, have customer centric mindset, excellent problem-solving/decision-making and teaching/coaching skills to drive continuously improving operational performance and top and bottom-line results. Responsible for top and bottom-line growth strategy and results. Specific Job Function: • Set multiyear vision/budget and tactical execution plan for the region, aligned with BU vision, supported by visibly managed KPIs through strong collaboration/sense of ownership with General Managers, • Adhere to and enforce all company safety guidelines, • Recruit, train, and support General Managers through talent management efforts., • Evaluate and develop team members to ensure future needs of the business are met from a talent perspective with effective leaders in place and strong succession planning., • Foster a team culture by empowering recognizing and motivating branch personnel focused on best-in-class employee experience, • Prepare all staff members to be in position to deliver exemplary customer service and measure the job performance of the staff to ensure customer satisfaction, • Support resolution of escalated customer issues, incident reports, and legal actions., • Identify, design and lead major strategic initiatives for the region and provide strategic analysis to drive improved decision making., • Work directly with the Leadership team and GMs on identifying and resolving significant business issues., • Support/Collaborate with Sales team and General Managers to maximize all revenue streams for the region while developing and implementing business, marketing, and advertising plans., • Drive operational efficiency and cost control measures to achieve business results including revenue and EBITDA targets for assigned region., • Drive/oversee/coach problem solving and continuous improvement sessions with branch resources and/or Region/BU level resources while sharing/learning and implementing region relevant best practices, • Manage internal and external stakeholder relations and negotiate contracts., • Ensure products and services comply with regulatory and quality standards., • Ensure company standards and procedures are followed., • Prepare and present monthly, quarterly, and annual statements, analyses, and reports of operations and finances., • Ensure effective communication through the region, • Analyze data and put together strategic plans to help improve all areas of your region, • At least 60% travel to branches across region. Quarterly travel to Illinois Corporate location, • Complete other ad-hoc tasks as assigned Competencies: To perform the job successfully, an individual should demonstrate the following competencies in this position: Customer Focus Time Management Organization and Planning Problem Solving Teaching/Coaching Strategic Planning Team Player Analytical Judgement/Decision Making Negotiation Integrity Detail Oriented Leadership/Delegation Resourcefulness Talent Management Sales Management Accountability Profit Generation Ability Qualifications: • Bachelor's degree in business administration, management, or a similar field., • 10+ years of overall management and leadership experience., • 5+ years of managing a field team of managers, • 5+ years of dealer/distributed business and experience in a field service industry is a plus, • Water Treatment or Field Service Industry experience required, • Experience in strategy deployment process in multi branch environment and utilizing structured problem solving/project management tools/processes is a plus, • Proficiency in Microsoft Office, with CRM systems, and project management tools., • Excellent communication skills, both verbal and written., • Excellent leadership and decision-making skills., • Ability to multitask and work efficiently under pressure., • Strong analytical and problem-solving skills., • Sales and Profit Management skills, • Ability to build strong teams, • Set winning culture for the region, • Competitive and aggressive

Job Description About Us ITC Worldwide Advisors, LLP is a rapidly growing, modern provider of professional services to the middle market, operating globally. Our mission is to instill confidence in a world of change. Enable Transformation while doing more with less! Our exceptional people are the cornerstone of our unique culture and talent experience. Responsibilities • Understand clients' needs and expectations, their business and industry, accounting and control systems, employees, company values, and industry-related GAAP and GAAS issues., • Develop an understanding of the ITC audit automation approach and ERP tools., • Assess risks and evaluate the client's internal control structure. Required Skills and Qualifications • Completion of 90+ credit hours towards a B.A. / B.S. degree or equivalent from an accredited university in Accounting or Finance., • You must have passed your ACCA, CPA, CFA, or CIMA exam. N.B: We kindly request you to complete a brief survey. Your feedback will help us enhance the candidate experience and ensure we attract the best talent. Next Steps: Once you have completed the survey, please proceed with your job application as instructed. Learn more: