Systems integration engineer jobs in Hauppauge, New YorkCreate job alerts

GSE Dynamics, Inc., a full-service engineering and manufacturing company located in Hauppauge, NY, is seeking a Manufacturing Engineer in the Engineering Department who is organized, detail oriented and possesses strong interpersonal skills. \n Summary: \n The Manufacturing Engineer will be responsible for evaluating, designing, and implementing efficient production methods and processes. The role focuses on improving operational efficiency, quality control, and overall productivity. The successful candidate will work closely with design, production, and quality teams to ensure the most effective and innovative production strategies are applied. \n Reports to: Director of Manufacturing Planning \n Duties include: \n\n • Analyze and design efficient production processes for manufacturing systems.\n, • Develop and implement process improvements to reduce production time, cost, and waste.\n, • Create and maintain process documentation, including work instructions, procedures, and flowcharts.\n, • Collaborate with the engineering and production teams to ensure proper integration of new methods into existing systems.\n, • Conduct time studies, process optimization, and line balancing to enhance productivity.\n, • Identify potential issues or bottlenecks in production and propose corrective actions.\n, • Develop and support the introduction of new tools, technologies, and equipment to improve production processes.\n, • Ensure compliance with industry standards, safety regulations, and quality requirements.\n, • Assist in the design and layout of production lines, workstations, and facilities.\n, • Conduct root cause analysis for problems related to manufacturing efficiency or quality.\n, • Provide training and support to operators and production staff on new methods or procedures.\n, • Monitor and report on key performance indicators (KPIs) related to production efficiency, cost reduction, and product quality.\n, • Proven experience in a manufacturing or production environment, ideally as a Methods Engineer or in a similar role.\n, • Strong understanding of production processes, lean manufacturing principles, and process improvement techniques (such as Six Sigma, Kaizen, etc.).\n, • Experience with process mapping, time studies, and work measurement.\n, • Proficient in using CAD software, manufacturing simulation tools, and ERP systems.\n, • Excellent problem-solving, analytical, and troubleshooting skills.\n, • Strong communication and teamwork abilities.\n, • Experience in aerospace and defense industry\n, • Certification in Lean Manufacturing, Six Sigma, or other process improvement methodologies.\n, • Process Improvement, Production Systems Design, Manufacturing Technologies\n, • CAD and Simulation Tools, ERP Systems, Problem Solving, Data Analysis, \n, • Project Planning, Budgeting and Cost Management and Cross Functional Collaboration\n

Job DescriptionSUMMARY: Parker Fluid Systems Division (FSD) is seeking an Embedded Senior Software Engineer to join our team. We are looking for a candidate who has working experience designing, developing and verifying embedded software in aerospace and/or industrial applications. The candidate should be familiar with industry-standard software development and design assurance practices (such as DO-178, ISO 26262, EN 50128, IEC 61508 or IEC 62304) and their application across the entire software development lifecycle. FUNCTIONS: Our charter is to develop fuel measurement, management and inerting systems for commercial and defense airframers. The Software Engineering team works closely with the Systems and Electronic Hardware Engineering teams to develop, qualify and certify these technologies as products for our customers in aerospace and industrial markets. The individual will have the following responsibilities (not an inclusive list): • Develop embedded software using C and/or model-based tools such as SCADE, • Develop high level and low level software requirements, • Create requirements-based test cases and verification procedures, • Perform software integration testing on target hardware using both real and simulated inputs/outputs, • Analyze software requirements, design and code to assure compliance to standards and guidelines, • Perform traceability analysis to customer specification requirements to software code, • Participate in software certification audits, e.g. stages of involvement (SOI) REQUIRED: • BS in Software Engineering, Computer Engineering, Computer Science or related field, • 5+ years of experience performing software development, verification and/or integration, • Strong technical aptitude with analytical and problem-solving capabilities, • Excellent interpersonal and communication skills, both verbal and written, • Ability to work in a team environment, cultivate strong relationships and demonstrate initiative, • Need Embedded SW developer from a Regulated Environment - MUST HAVE HIGHLY PREFERRED: • Experience with C programming language, • Experience with model-based software development using SCADE, • Experience developing embedded software control systems, • Experience planning and executing projects using Agile software development methodology, • Experience managing requirements using DOORS or DOORS Next Gen (DNG), • Experience with digital signal processing or digital filter design, • Experience with ARM microprocessors, • Experience with serial communication protocols (e.g. CANbus, ARINC, RS-232), • Familiarity with aerospace (e.g., DO-178, DO-330, DO-331) and/or industrial (e.g., IEC 61508) software certification requirements, • Familiarity with functional safety standards such as ISO 13489, IEC 61508, IEC 62061, ISO 26262 or ARP4761Software Engineer to join our team., • We are looking for a candidate who has working experience designing, developing and verifying embedded software in aerospace and/or industrial applications. The candidate should be familiar with industry-standard software development and design assurance practices (such as DO-178, ISO 26262, EN 50128, IEC 61508 or IEC 62304) and their application across the entire software development lifecycle.

Job Description Jr Test Engineer Job Description • Building part test setups, qualification testing, making of production test jigs, developing test routines, test software and test automation, • Collaborate with Design Engineers to address issues related to test equipment hardware, software, reliability, and qualification across multiple shifts and facilities., • Provide maintenance and repair support for test station hardware, software, and interface test adapters, including both custom-designed and COTS systems., • Resolve test-related issues in conjunction with factory production personnel., • Test PCB layouts., • Prepare documentation for PCB assembly and test travelers., • Support test box development and initial production runs., • Utilize C# code for test development., • Perform ATE test integration and development., • Assist Design Engineers, when necessary, in troubleshooting and repairing products returned by customers. Requirements • Bachelor of Science in Electrical Engineering (BSEE), an electrical engineering degree, or equivalent military training and experience., • Candidates should possess a background in power electronics., • Basic understanding of analog circuit design, circuit analysis, digital circuit design, and analog signal conditioning., • Desirable exposure to software such as C#, embedded code development, and debugger usageCompany DescriptionOur client is a reputable manufacturing company offering a permanent opportunity, competitive salary and great benefits.Our client is a reputable manufacturing company offering a permanent opportunity, competitive salary and great benefits.

Job Description Embedded Software Engineer VJ X-Ray LLC is the global leader in developing and manufacturing integrated x-ray sources and high voltage generators. Our mission is to be uncompromising in pushing the boundaries of component design and manufacturing for every OEM partner. This role is responsible for developing optimized software to support the prototypes of integrated x-ray sources and high voltage generators. Job Description • Design and create requirement specifications for the Microcontrollers to be used in High Voltage power supply designs, • Test units, integration of firmware and GUI (Graphical User Interface) changes, • Maintain Software Version Control (SVN) and release management systems, • Provide documentation for third party integration into the firmware and customer support to debug software issues, • Program Data Acquisition based GUI’s using serial communication (RS232) and Ethernet Communication (TCP/IP) protocols, • Work with cross-functional team to design and develop new products and improve existing designs, • Safety Sensitive Position Essential Skills • Bachelor’s Degree or higher in Electrical and/or Computer Engineering, • Demonstrated ability to write firmware for industrial control equipment, • Minimum of two (2) years of experience with NI, LabVIEW, Microsoft Visual Studio C++/VB/C#, Embedded C and RTOS, • 2-3 years of experience with Freescale products (MC56F8037 7 ARM) microcontrollers, • Ability to work with Analog and Digital Circuits based PCB designs like Op Amps, ADC, DAC & multi-functional IC’s, • Knowledge of RS-232 and TCP/IP communication standards, • Proficient in Microsoft Office Suite, • Perform software development and version control adhering to SCRUM standard, • Proficiency in the English language with well-established written and verbal communication skills, • Must be a highly organized, self-motivated, team player, • Collaboration and creative thinking skills, • Knowledge of radiographic imaging systems for industrial and medical inspection, • Strong background in understanding x-ray tube design of high voltage generators to power up X-ray sources, • Prior experience developing wireless security protocols Physical & Mental Demands: • Regularly required to sit, walk, bend, stoop and stand within an industrial environment, • Will need to repeatedly use hands and fingers to operate basic office equipment and possibly operate hand and power tools standard to a production environment, • Expected to effectively communicate in person, on the phone, via email and on other electronic devices on a continual and repetitive basis, • Responsibilities will require lifting, moving, staging and placing of materials up to 50 pounds alone and heavier with assistance, • Vision abilities required for this job include close vision, distance vision, color vision, peripheral vision, depth perception and ability to adjust focus, • Must be able to fulfill essential job functions in a consistent state of alertness and safe manner, • May be required to travel, domestically and internationally, by car and/or by air. Overnight stays may also be required., • On a regular basis, will be required to:, • use written and oral communication skills, • read and interpret data, information and documents, • be creative, make judgements, use reasoning and make decisions, • observe and interpret situations, • learn and apply new information or skills, • perform detailed work on multiple, concurrent tasks, • work under intensive deadlines with frequent interruptions, • interact with internal and external customers holding positions from a wide array of disciplines and organizational hierarchy levels

Job Description For more than 60 years, Data Device Corporation (DDC) has been recognized as a world leader in the design and manufacture of high-reliability Connectivity, Power, and Control solutions for the Aerospace, Defense, and Space industries. Our dedication to supplying quality products, on-time delivery, and superior support, has contributed to the success of our customers and the critical missions they serve. This position is 100% onsite at our Bohemia, NY office. The pay range for this position is between $130,000 and $170,000 annually, and we will rely on previous experience. This position requires a U.S Person or a person who can qualify for a Department of State or Department of Commerce License. Position Summary: We are seeking an experienced Senior Verification Engineer to join our Engineering team. The successful candidate will play a key role in ensuring the functionality, performance, and reliability of FPGA-based designs through a comprehensive verification and validation processes. This position involves developing robust testbenches, creating advanced simulation environments, executing verification suites, and collaborating closely with Design Engineers to achieve first-pass success for FPGA implementations. Key Position Accountabilities: • Design and Development: Develop and implement verification plans, test strategies, and methodologies for complex FPGA-based systems., • Verification and Validation: Execute comprehensive verification processes, including simulation, testbench creation, requirement-based validation and verification per accepted safety standards, and regression testing to ensure design correctness and performance., • Collaboration: Partner with system architects, hardware engineers, and software developers to define requirements and deliver integrated solutions., • Troubleshooting: Diagnose, debug, and resolve FPGA-related issues, including hardware/software interaction challenges and performance optimizations., • Documentation: Prepare and maintain detailed documentation of verification processes, design methodologies, and test results to support traceability and knowledge sharing., • Mentorship: Provide technical guidance, mentorship, and best practices to junior engineers in FPGA design, verification, and validation techniques., • Planning: Develop project schedules, identify resource requirements, and support product development from concept through release., • Education: Bachelor’s or Master’s degree in Electrical or Computer Engineering (or related field)., • Experience: 8–15 years of hands-on experience in FPGA verification and development of complex digital systems, utilizing advanced verification techniques and methodologies., • HDL language & Verification Frameworks: Expertise in VHDL; working knowledge of Verilog, SystemVerilog and UVM for function verification., • FPGA Design Tools: Proficiency in Xilinx Vivado required; familiarity with Intel Quartus and Lattice Diamond is desirable., • Simulation & Debug tools: Experience using ModelSim/Questa and Xilinx Integrated Logic Analyzer (ILA)., • Technical Expertise: Solid understanding of FPGA architectures, digital design principles, and high-speed design techniques., • Protocols: Hands on experience with PCIe, 1G/10G Ethernet, and Time-Sensitive Networking (TSN)., • Problem-Solving: Strong analytical and debugging skills with meticulous attention to detail., • Communication: Excellent verbal and written communication skills, with the ability to collaborate effectively across multidisciplinary teams., • Experience with embedded systems and software development., • Familiarity with hardware/software co-design and system integration. Data Device Corporation is an Affirmative Action/Equal Opportunity Employer and is committed to providing equal employment opportunity (EEO) for all persons in all facets of employment. All qualified applicants will receive consideration for employment without regard to race, color, religion, age, gender, sexual orientation, gender identity, national origin, citizenship status, marital status, genetic information, disability, protected veteran status or any other legally protected status.

Job DescriptionAssociate Electrical Engineer Long Island, NY (Suffolk County) On-site | Full-time | Aerospace, Defense & High-Reliability Electronics • Must be US Citizen or Green Card Holder, • No Visa Candidates If you’re looking for a place where you can grow your technical depth, work alongside seasoned engineers, and see your ideas come to life in real products — this is the place to do it. The Opportunity As an Associate Electrical Engineer, you’ll be part of a collaborative team developing and testing advanced semiconductor and microelectronic products. You’ll gain hands-on exposure to real-world applications — from building and qualifying test systems to supporting product launches and improving reliability across complex assemblies. This is an ideal role for someone with a strong technical foundation who wants to bridge theory and practice, working in a lab environment that values curiosity, precision, and continuous learning. What You’ll Do * Design, build, and troubleshoot test setups for new and existing products * Support qualification and production testing of semiconductor and microelectronic devices * Contribute to PCB layout and assembly, test box development, and documentation * Assist in ATE (Automated Test Equipment) integration and code development (C# preferred) * Prepare and maintain test traveler documentation for production runs * Partner closely with production and engineering teams to ensure smooth product transitions from prototype to manufacturing What You Bring * B.S. in Electrical Engineering (BSEE) or equivalent technical background / relevant military training * Foundational knowledge of power electronics and analog/digital circuit design * Ability to analyze and troubleshoot circuits — both theoretically and hands-on * Exposure to C++, embedded code development, or C# test software (a plus, not required) * Eagerness to learn, collaborate, and take ownership in a fast-paced, high-impact environment Why You’ll Love It Here * Work directly with senior engineers and technical leaders who mentor and invest in your growth * See your work directly impact mission-critical systems for aerospace, defense, and medical applications * Be part of a stable, established company with a start-up feel in the lab — where innovation still happens daily

Job Description Embedded Senior Software Engineer – Aerospace/Industrial • Location: Central Islip, NY, • Employment Type: Permanent, Full-Time, • Shift: 1st Shift, Monday–Friday (flexible), • Compensation: $127,000–$137,000 + 12.5% annual bonus, • Work Arrangement: 100% onsite, • Citizenship Requirement: Must be a U.S. Citizen, • Job ID: bh18176 About the Role A highly respected engineering organization in the fluid systems space is seeking a Senior Embedded Software Engineer to lead and execute critical development projects for advanced measurement and control technologies used in aerospace and industrial applications. This is a great opportunity for an engineer who thrives in a regulated environment and enjoys seeing a project through from concept to completion. If you’re an embedded software engineer who loves hands-on development, tackling complex technical challenges, and partnering closely with systems and hardware teams, this role offers long-term career growth and impactful work. What You’ll Do This role is split approximately 75% software development and 25% project leadership, including owning full project lifecycle execution. Responsibilities include: • Develop embedded software in C and/or model-based tools such as SCADE, • Create high-level and low-level software requirements, • Develop requirements-based test cases and verification procedures, • Conduct software integration testing on target hardware using real and simulated I/O, • Analyze requirements, design, and code to ensure compliance with industry standards, • Perform traceability analysis from customer specifications to software implementation, • Participate in formal certification audits and regulatory reviews, • Collaborate closely with Systems and Hardware Engineering teams, • Lead assigned projects from planning through execution Required Qualifications • Bachelor’s degree in Software Engineering, Computer Engineering, Computer Science, or a related discipline, • 5+ years in embedded software development, verification, or integration, • Prior experience working in a regulated environment (Aerospace, Industrial, Automotive, Medical, Rail, etc.), • Strong proficiency with embedded systems and microcontrollers, • Excellent analytical, communication, and problem-solving skills, • Demonstrated ability to lead and execute projects end-to-end, • Must be a U.S. Citizen for site security requirements, • Ability to work 100% onsite in Central Islip, NY Highly Preferred Experience • Strong hands-on experience with C programming, • Model-based development using SCADE, • Embedded control system development, • Agile project planning and execution, • Requirements management tools (DOORS / DOORS Next Gen), • Digital signal processing or digital filter design, • ARM microprocessor experience, • Familiarity with serial communication protocols (CANbus, ARINC, RS-232, etc.), • Knowledge of software certification standards such as:, • DO-178, DO-330, DO-331, • IEC 61508, ISO 26262, EN 50128, • Functional safety frameworks (ARP4761, ISO 13489, IEC 62061, etc.) Why Consider This Opportunity? This employer offers an extremely competitive benefits package, including: • Comprehensive medical, dental, vision, and prescription coverage, • 401(k) with 100% match on the first 5%, • Company-funded retirement contributions (3% annually), • Paid parental leave and adoption assistance, • Tuition reimbursement and professional development support, • Paid Time Off + 13 paid holidays, • Additional voluntary benefits (legal, identity protection, pet wellness, etc.), • Short-term and long-term disability at no cost How to Apply If you have strong embedded software experience in a regulated environment and enjoy leading technical projects, I’d love to speak with you! Company DescriptionConnexion Systems & Engineering is a full-service staffing firm, whose mission is to provide "best in class" staffing services to our clients and job seekers alike. We strive to achieve excellence in staffing, job placement and recruiting services, while treating our clients, employees, and candidates with the professionalism and respect they deserve.Connexion Systems & Engineering is a full-service staffing firm, whose mission is to provide "best in class" staffing services to our clients and job seekers alike. We strive to achieve excellence in staffing, job placement and recruiting services, while treating our clients, employees, and candidates with the professionalism and respect they deserve.

Job Description For more than 60 years, Data Device Corporation (DDC) has been recognized as a world leader in the design and manufacture of high-reliability Connectivity, Power, and Control solutions for the Aerospace, Defense, and Space industries. Our dedication to supplying quality products, on-time delivery, and superior support, has contributed to the success of our customers and the critical missions they serve. This position is 100% onsite at our Bohemia, NY office with occasional travel to manufacturing location in Mexico The pay range for this position is between $120,000 and $150,000 annually, and we will rely on previous experience. This position requires a U.S Person or a person who can qualify for a Department of State or Department of Commerce License. Position Summary: The Senior Design Engineer is responsible for developing new magnetics related components based on customer or marketing inputs. They shall have working knowledge of transformer design, property of materials, electrical testing, and design for manufacturability. Performance will be measured on creating designs that meet or exceed customer requirements, timely transition of new designs from concept to production readiness, collaboration with production in suggesting and implementing productivity projects. Key Position Accountabilities: · Design and Development: Plan, conceptualize, and develop new magnetics components using new and innovative technology. Design analog circuits related to high frequency data bus and video signal transmission. Provide material and labor estimates to Sales for customer requests for pricing. • Equipment and Materials Research: Actively seek out opportunities improve existing processes by keeping up with new equipment and material releases. Seek out ways to integrate new equipment and materials to improve productivity., • Collaboration: Work closely with engineers, managers, and other design professionals in the development of prototypes, sustaining efforts, and integration of systems into manufacturing processes. Support the transition of designs from concept to prototype and to full-scale production., • Mentoring and Design Review: Coach junior engineers in solving design issues. Responsible for project management of Design Reviews., • Testing and Validation: Create, review, and verify test setups. Support the execution of testing procedures required for product acceptance and qualification. Collaborate with internal and external facilities to validate design performance against defined specifications., • Engineering Analysis: Perform calculations to support CapEx return on investment decisions., • Material Selection and Development: Choosing the right material for a specific application, considering factors like strength, durability, cost and environmental impact., • Documentation and Compliance: Create, review, and maintain technical drawings, specifications, and product documentation using a mix of CAD (SolidWorks preferred), MS Word, and digital images. Ensure designs and processes meet industry and regulatory standards, including internal engineering standards and product definition procedures., • Continuous Improvement: Apply problem-solving skills to identify areas of improvement in existing designs or manufacturing processes, making recommendations and providing solutions to enhance efficiency, quality, and cost-effectiveness., • Mathematical and Analytical Skills: Strong ability to apply engineering fundamentals, and statistical methods to create innovative, reliable, cost effective design solutions that translate into more design wins., • Design Skills: Strong knowledge of electromagnetic theory, magnetic circuit design, and magnetic material properties., • Analog Circuit Design: Working understanding of analog and digital electronics, signal integrity, power and thermal management is a plus. Simulation experience with LTspice or similar is a plus., • Problem Solving and Innovation: Excellent troubleshooting and critical thinking skills with the ability to propose innovative and creative solutions to complex design challenges., • Communication Skills: Strong verbal and written communication skills, with the ability to present technical information clearly to both technical and non-technical stakeholders for internal and external customers. Excellent interpersonal skills to work collaboratively across teams. Bilingual in English and Spanish is beneficial., • Adaptability: Ability to work on several projects at once and shift priorities as needed to meet company goals, • Attention to detail: High attention to detail with the ability to conduct rigorous reviews of designs, calculations, and test procedures to ensure compliance with specifications and quality standards., • Bachelor of Science degree in Engineering discipline required., • Bachelor’s or Master’s Degree in Electrical Engineering preferred, • 7+ years of related experience., • Working Knowledge of Military Specifications., • Experience in Military/Aerospace industry a plus. Work Environment: • This position operates in a mix of office, manufacturing, and lab-based environment., • Some travel may be required for process review at other manufacturing plants or supplier locations. Physical Demands: • Must be able to remain stationary during design and analysis sessions., • Having good manual dexterity and basic soldering / assembly skills to assist in building test and assembly fixtures is a plus., • Ability to lift and move up to 25 pounds of testing or prototyping equipment., • Frequent communication with cross-functional teams; ability to convey complex technical details clearly and effectively. This job description is not designed to cover or contain a comprehensive listing of activities, duties or responsibilities that are required of the employee. This job description indicates, in general the nature and levels of work, knowledge, skills, abilities and other essential functions (as covered under the ADA) expected of the incumbent. Duties, responsibilities and activities may change at any time with or without notice as required. Data Device Corporation is an Affirmative Action/Equal Opportunity Employer and is committed to providing equal employment opportunity (EEO) for all persons in all facets of employment. All qualified applicants will receive consideration for employment without regard to race, color, religion, age, gender, sexual orientation, gender identity, national origin, citizenship status, marital status, genetic information, disability, protected veteran status or any other legally protected status.