Trabajos tester en Wichita, KansasCrear alertas

Location: Remote (USA) Company: ProductReviewJobs Thank you for your interest in becoming a Paid Product Tester. Notes on Product Testing: - Each product test is conducted by a third party, independent company. Product tests and online studies are typically lower.

Telecommute (you can work from home, work or school). Product Testers are wanted to work from home nationwide in the US to fulfill upcoming contracts with national and international companies. A paid Product Tester position is perfect for those looking for an entry-level opportunity, flexible or sea

Telecommute (you can work from home, work or school). A paid Product Tester position is perfect for those looking for an entry-level opportunity, flexible or seasonal work, temporary work or part-time work. Product Testers are wanted to work from home nationwide in the US to fulfill upcoming contrac

Telecommute (you can work from home, work or school). A paid Product Tester position is perfect for those looking for an entry-level opportunity, flexible or seasonal work, temporary work or part-time work. Product Testers are wanted to work from home nationwide in the US to fulfill upcoming contrac

Telecommute (you can work from home, work or school). A paid Product Tester position is perfect for those looking for an entry-level opportunity, flexible or seasonal work, temporary work or part-time work. Product Testers are wanted to work from home nationwide in the US to fulfill upcoming contrac

Telecommute (you can work from home, work or school). A paid Product Tester position is perfect for those looking for an entry-level opportunity, flexible or seasonal work, temporary work or part-time work. Product Testers are wanted to work from home nationwide in the US to fulfill upcoming contrac

Telecommute (you can work from home, work or school). A paid Product Tester position is perfect for those looking for an entry-level opportunity, flexible or seasonal work, temporary work or part-time work. Product Testers are wanted to work from home nationwide in the US to fulfill upcoming contrac

We’re looking for Data Entry Specialists for Customer Products across the US to work from home and help top brands improve their products before they hit the market.

Telecommute (you can work from home, work or school). Product Testers are wanted to work from home nationwide in the US to fulfill upcoming contracts with national and international companies. A paid Product Tester position is perfect for those looking for an entry-level opportunity, flexible or sea

Execute and maintain all Sephora visual merchandising and operational standards, including merchandise sets, tester maintenance and department cleanliness and hygiene standards. Support omni-processing within the department. Support visual elements of the department and communicate missed or damaged

We're looking for passionate gamers to join our elite team of mobile game testers. Get paid to play and test the latest games before they launch. $500+ Avg Monthly Pay 5-10 Hours/Week 100% Remote • Must be 18 years or older, • Own a smartphone or tablet, • Able to commit 5-10 hours per week, • Strong attention to detail, • Reliable internet connection

We're looking for passionate gamers to join our elite team of mobile game testers. Get paid to play and test the latest games before they launch. $500+ Avg Monthly Pay 5-10 Hours/Week 100% Remote • Must be 18 years or older, • Own a smartphone or tablet, • Able to commit 5-10 hours per week, • Strong attention to detail, • Reliable internet connection

We're looking for passionate gamers to join our elite team of mobile game testers. Get paid to play and test the latest games before they launch. $500+ Avg Monthly Pay 5-10 Hours/Week 100% Remote • Must be 18 years or older, • Own a smartphone or tablet, • Able to commit 5-10 hours per week, • Strong attention to detail, • Reliable internet connection

We're looking for passionate gamers to join our elite team of mobile game testers. Get paid to play and test the latest games before they launch. $500+ Avg Monthly Pay 5-10 Hours/Week 100% Remote • Must be 18 years or older, • Own a smartphone or tablet, • Able to commit 5-10 hours per week, • Strong attention to detail, • Reliable internet connection

We're looking for passionate gamers to join our elite team of mobile game testers. Get paid to play and test the latest games before they launch. $500+ Avg Monthly Pay 5-10 Hours/Week 100% Remote • Must be 18 years or older, • Own a smartphone or tablet, • Able to commit 5-10 hours per week, • Strong attention to detail, • Reliable internet connection

We're looking for passionate gamers to join our elite team of mobile game testers. Get paid to play and test the latest games before they launch. $500+ Avg Monthly Pay 5-10 Hours/Week 100% Remote • Must be 18 years or older, • Own a smartphone or tablet, • Able to commit 5-10 hours per week, • Strong attention to detail, • Reliable internet connection

We're looking for passionate gamers to join our elite team of mobile game testers. Get paid to play and test the latest games before they launch. $500+ Avg Monthly Pay 5-10 Hours/Week 100% Remote • Must be 18 years or older, • Own a smartphone or tablet, • Able to commit 5-10 hours per week, • Strong attention to detail, • Reliable internet connection

Job Description JOB DESCRIPTION Job Title: Engineering Technician Level 1 FLSA Status: Non-Exempt Job Code: 12105 Date Created: 03/12/2020 Reports To: Engineering Supervisor/Manager Date Revised: Department Name: 40 – Test Engineering, 41 - Environmental Engineering Date Reviewed: 08/26/2020 Location: Wichita POSITION SUMMARY Apply the principles and theories of electronics to set-up, analyze and solve technical testing problems with semiconductor components and related automated or bench test equipment. Perform debug of complex device and tester interactions, conduct performance tests, compile engineering data, and report results. Resolve real-time electronic component production test problems. KEY RESPONSIBILITIES/ESSENTIAL FUNCTIONS INCLUDE • Troubleshoot electronic test equipment and hardware to clear production device testing failed set-ups (FS)., • Perform testing of electronic component production failures (FV) to determine passing or failure conditions and verify failure mechanisms. Troubleshoot the failing devices failure modes for engineering evaluation., • Complete detailed engineering data-log analysis via collection, formatting, organizing, and evaluating electronic device test results., • Devise and run tests to ensure product quality., • Coordinate with engineering, customer service, and production operations to complete test and qualification processing to meet customer requirements., • Follow Quality Documentation Manual procedures to operate ATE and component handling equipment., • Verify device counts, inspect device lead integrity, and read/interpret project-specific instructions. Education: Associate’s Degree in Electrical Engineering or related field preferred; however, a combination of education and experience wherein the skills and abilities to perform the responsibilities and functions have been adequately demonstrated is acceptable. Experience: Up to 3 years of experience in the semiconductor industry preferred. • Ability to perform electronic component ATE (Automatic Test Equipment) set-ups, device testing and troubleshooting of failing test conditions., • Ability to perform a variety of technical tasks including test reliability evaluation, analysis of test/device variance, implement test correlation techniques, utilize sampling theory and/or factor analysis., • Anticipate and resolve complex, non-routine problems., • Ability to read, analyze, and interpret technical manuals, operating procedures, and maintenance instructions., • Ability to use time management skills to handle multiple priorities in a timely manner., • Utilize effective communication skills with a variety of internal teams to achieve required results., • Effectively and efficiently utilize Microsoft Office and other computer products and programs. Knowledge/Skills/Overall Competences: • Job Knowledge:, • Knows fundamental concepts, practices and procedures of a particular field of specialization., • Learns to use professional concepts., • Technical Skill, • Has basic technical ability and skills., • Is able to apply basic principles and concepts learned to job situation., • Applies company policies and procedures to resolve routine issues., • Activity/Planning: Task Definition, Methods, Action Planning, • Work is organized and tasks completed in a systematic fashion for thoroughness and quality., • Develops a work schedule to meet deadlines., • Knows when to elevate issues/tasks so that they will be completed on time., • Job Complexity, • Works on problems of limited scope., • Work assignments are limited in scope and complexity and require evaluation of technical data within defined procedure to make decisions and/or recommendations., • Follows standard practices and procedures in analyzing situations or data from which answers can be readily obtained., • Builds stable working relationships internally., • Problem Resolution, • Escalates problems and issues., • Provides solutions to a variety of problems., • Knows when to escalate issues for peer or supervisor input., • Communication: Verbal/Written, • Has regular contact with supervisor or designed leader to report project/work status., • Has regular interaction with other departments to provide technical knowledge to work with others in resolving problems., • Is assertive in presenting own ideas in work group., • Provides data and associated reports that are thorough., • Teamwork, • An active and effective participant as a team member., • Keeps team needs in perspective with individual needs., • Participates in discussion to identify and share improvement ideas., • Promotes positive teamwork, • Leadership, Affecting Change, Coaching, • Achievements, sound decisions and recommendations lead to the task success on schedule., • Influences individuals within work unit., • Exhibits confidence with work., • Supervision Required, • Normally receives detailed instructions on all work, but the most routine., • Using established procedures and working under regular supervision, performs routine assigned tasks. SUPERVISORY RESPONSIBILITIES Total Number of Employees Directly Supervising: Number of Subordinate Supervisors Reporting to Position: This job description is intended to describe the general nature and level of work being performed. This is not intended to be an all-inclusive list of responsibilities, duties, skills required of employees so classified. In addition, this is not an employment contract and should not be construed or interpreted as creating an implied or expressed guarantee of continued employment. The employment relationship at Integra Technologies Inc is by mutual consent (Employment at Will). I have read the job description, as well as the physical requirements below, and understand the expectations. By signing below, I acknowledge that I am able to perform the essential functions and meet the minimum requirements. EMPLOYEE___________________________________________ Date ____________ PHYSICAL REQUIREMENTS INCLUDE In an average workday, employee must (check one frequency for each task): Task None Occasional Frequent Constant Stand ☐ ☐ ☒ ☐ Walk ☐ ☐ ☒ ☐ Sit ☐ ☐ ☒ ☐ Bend/stoop ☐ ☐ ☒ ☐ Climb ☐ ☐ ☒ ☐ Reach above shoulders ☐ ☐ ☒ ☐ Squat/crouch/kneel ☐ ☒ ☐ ☐ Push/pull ☐ ☐ ☒ ☐ Lift ☐ ☒ ☐ ☐ Usual amount ☐ <10 lbs ☐ 11-25 lbs ☒ 26-50 lbs ☐ 51+ lbs Carry ☐ ☒ ☐ ☐ Usual amount ☐ <10 lbs ☒ 11-25 lbs ☐ 26-50 lbs ☐51+ lbs Employee must use hands for repetitive action such as (please check all): Task Right Hand Left Hand Simple grasping ☒ Yes ☐ No ☒ Yes ☐ No Firm grasping ☒ Yes ☐ No ☒ Yes ☐ No Fine manipulation ☒ Yes ☐ No ☒ Yes ☐ No WORKING CONDITIONS INCLUDE In an average workday, employee is exposed to (check one frequency for each task): Task None Occasional Frequent Constant General shop conditions ☐ ☐ ☐ ☒ General office environment ☐ ☐ ☒ ☐ Humid, extreme hot/cold temps (non-weather) ☒ ☐ ☐ ☐ Outdoor weather conditions ☒ ☐ ☐ ☐ Fumes or airborne particles ☒ ☐ ☐ ☐ Fluorescent lights ☐ ☐ ☐ ☒ Moving, mechanical parts ☐ ☐ ☒ ☐ Toxic chemicals ☒ ☐ ☐ ☐ Loud noise intensity levels ☒ ☐ ☐ ☐ Risk of electrical shock ☐ ☒ ☐ ☐ Travel for job ☒ ☐ ☐ ☐

Job DescriptionSyms Strategic Group (SSG) is seeking a talented Senior Software Test Engineer Location: Remote Department: Veterans Affairs (VA) Type: Full Time Min. Experience: Experienced Security Clearance Level: Public Trust (MBI) Military Veterans are highly encouraged to apply!Essential Duties and ResponsibilitiesNOTE: This is NOT an SQA tester position. Candidates MUST have strong programming skills, often in languages such as C#, .Net, Java, or Python. • Develop and execute test plans, test cases, and test procedures to ensure that all information systems, products, and services meet organizational standards and end-user requirements, • Develop test plans, test schedule, and approach, • Write test cases and scripts and identifies data for test scenarios, • Conduct a walk through on test case(s)/script(s) with Test Managers, Requirement Leads, Project Managers, and Development Leads, • Perform and lead tests and software and/or Information Technology (IT) systems to ensure proper operation and freedom from defects, • Perform verification activities on work products using defined methods, procedures, and criteria with an appropriate verification environment, • Document and communicate test results, • Support analysis of test results and resolution of open issues, • Document and communicate test results, • Support analysis of test results and resolution of open issues, • Document and work to resolve all complex problems, • Report progress on problem resolution to management, • Devise improvement to current procedures and develop models of possible future configurations, • Create daily test metrics and reporting, • Occasionally perform other IT systems engineering activities such as requirements, design, installation, operation, sustainment, and support, • Apply technical principles, theories, and concepts in the field, • Receive assignments in the form of objectives and establish goals to meet outlined objectives, • Provide direction to employees according to established policies and management guidance, • Measure whether objectives have been met, • Provide technical solutions to a wide range of difficult problems where analysis of data requires evaluation of identifiable factors, • Ensure that solutions are imaginative, thorough, practicable, and consistent with organizational objectives, • Independently determine and develop approach to solutions, • Review work upon completion for adequacy in meeting objectives, • Demonstrate good judgment in selecting methods and techniques for obtaining solutions, • Contribute to completion of specific programs and projects, • Perform frequent inter-organizational and outside customer contacts, • Represent organization in providing solutions to difficult technical issues associated with specific projects Required Skills and Experience, • Strong programming skills, often in languages such as C#, Java, or Python, • A proven track record of working on complex software projects and ensuring high-quality deliverables, • Experience in both manual and automated testing, • Experience with Agile/Scrum methodologies and understanding of the Software Development Life Cycle (SDLC), • Proficiency in writing and executing test cases, test scripts, and test plans, • Strong knowledge of test automation frameworks and tools (e.g., Selenium, TestNG, JUnit, QTP, LoadRunner), • Experience with continuous integration/continuous deployment (CI/CD) tools (e.g., GitHub Actions), • Familiarity with version control systems (e.g. Git and Subversion), • An understanding of performance testing and tools (e.g., JMeter and Gatling), • Experience with defect tracking and management tools (e.g. JIRA and Bugzilla), • Knowledge of database and SQL for validating stored data, • Experience in testing web applications, Application Programming Interfaces (APIs), and services, • An understanding of security testing practices and tools, • Experience with different types of testing, including functional, regression, integration, system, usability, and User Acceptance Testing (UAT), • Excellent analytical and problem-solving skills, • Strong communication and collaboration abilities, • An ability to work independently and as part of a team, • An attention to detail and commitment to delivering high-quality work, • An ability to prioritize multiple tasks and meet deadlines, • An ability to mentor and guide junior testers, • An ability to understand business requirements and translate them into effective test scenarios, • Experience with test management tools, • Knowledge of DevOps practices and tools, • An ability to conduct test reviews and provide constructive feedback, • X.12 medical claims (837, 834, 277, etc)A familiarity with cloud-based testing platforms (e.g., Amazon Web Services (AWS) and Azure)Formal EducationBachelor’s Degree in Computer Science, Information Technology, Engineering, or a related field and 10 or more years of experience.Citizenship RequirementU.S. Citizenship required for this specific opportunitySecurity Clearance RequirementsMust possess or qualify for a Public Trust (MBI)CRITICAL NOTES:, • SSG will not make assumptions regarding your qualifications. Your answers to the mandatory screening questions must be supported by the information on your resume. Applications with inconsistencies will not be considered., • Recruiters or Third parties will not be considered., • This is a 100% U.S. based remote position. However, candidates from CA, CO, IL, NJ, or NY will not be considered., • This is a W2 position., • All interviews will be conducted on Microsoft Teams with your camera on; there will be no exceptions. Syms Strategic Group, LLC is an Equal Opportunity Employer. Qualified applicants will receive consideration for employment without regard to race, color, religion, sex, age, national origin, marital status, disability, veteran status, sexual orientation, or genetic information. Powered by JazzHR F7TUMkx7t8

Job Description Monday - Thursday 2 PM - 12:30 AM Join a team where every aircraft is a win, and every teammate makes a difference. Our boutique-style MRO is built on customer focus, employee empowerment, and hands-on excitement with every delivery. We are significantly investing in training to expand your skills, enhance your experience, and fast-track your career. If you're looking for more than a job, this is your hangar. Apply now and ask about our custom sign-on bonus. Become a part of the next big thing in MRO. Independently operate, install, adjust, and maintain integrated computer/communications systems, consoles, simulators, and instrumentation used for air and space vehicle launch, tracking, positioning, and evaluation. Configure and troubleshoot data acquisition and test measurement equipment without supervision. Accurately record, analyze, and interpret complex test data for engineering evaluation and mission readiness. Apply standard procedures to ensure system performance and reliability. • Basic understanding of wiring diagrams and methodology: wire marking, wire routing clamping, symbols, and simple interconnect diagrams, bonding/grounding, • Basic understanding of avionics hardware removal and replacement: equipment racks, mounting structures, standard fasteners, • Documentation and Regulatory Compliance: understand and use of MM manuals and company paperwork such as removals and squawk sign off., • Understanding and able to use computer systems such as Corridor, ATP, Textron One view., • Basic Understanding of Avionics test equipment: Multimeter, Laversab Air data tester, Barfield Air data tester, Druck Air data tester, GE Air data tester, IFR4000/6000, TRX, • Thoroughly understand the fundamental principles and accurately demonstrate the correct procedures for grounding an aircraft., • Demonstrate the proper procedures and safety precautions to apply power to an aircraft, • Demonstrate a thorough understanding of the fundamental principles and correctly perform the procedures for removing and replacing avionics hardware., • Demonstrate a thorough understanding of fundamental principles and accurately perform the proper procedures for installing airframe components., • Exhibit in-depth knowledge of torque principles and correctly apply proper torquing procedures for threaded fasteners and plumbing lines., • Fully understand and correctly execute the procedures for inspecting, removing, and installing safety devices, including AMSafe components., • Ability to safely operate a digital or analog multimeter to measure voltage, resistance, and continuity in avionics circuits. Understanding test lead configuration, range selection, and safety precautions. Can interpret basic readings and identify common faults in wiring or components with minimal guidance., • Able to set up and operate the Laversab Air Data Test Set for pitot-static system checks. Understands basic test sequences, menu navigation, pressure calibration functions, and can verify airspeed, altitude, and vertical speed parameters. Can detect leaks or discrepancies and interpret displayed data under supervision., • Proficient in configuring and using the Barfield Air Data Tester to simulate and verify pitot-static inputs. Understands connections to aircraft test ports, performs altitude and airspeed sweeps, and monitors pressure decay/leakage. Able to operate the tester through standard procedures and recognize abnormal responses during functional tests., • Capable of independently performing basic test functions with the Druck unit, including automated test scripts for altimetry, airspeed indicators, and static systems. Understands parameter input, reference value comparison, and test documentation. Can troubleshoot common interface or pressure issues., • Understands the operational workflow of the GE Air Data Tester, including initiating and controlling tests for pitot-static validation. Able to conduct altitude and airspeed checks, input test parameters, and interpret test results in relation to maintenance manuals. Can assist with calibration procedures and report data accurately., • Demonstrates the ability to set up and operate the IFR4000/6000 or TRX test sets to evaluate transponder, DME, TCAS, and communication systems. Understands test modes, antenna connections, and functional test procedures per manufacturer specifications. Can interpret pass/fail results, adjust signal parameters, and verify system compliance with minimal oversight., • Able to configure and operate a TCAS test set to perform system interrogations, verify bearing accuracy, and simulate traffic scenarios. Understand aircraft interface connections, test range limits, and can evaluate system response under test conditions. Capable of identifying common system faults and validating TCAS functionality in line with maintenance procedures., • Comprehend in depth the basic principles and demonstrate, to a high degree of proficiency, the ability to use a volt / ohmmeter., • Comprehend in depth the basic principles and demonstrate, to a high degree of proficiency, the ability to perform slip torque checkout of autopilot servos, • Installs various communication / navigation equipment, • Fabricates electrical connectors and wire bundles, • Fabricate Coax Cable assemblies and terminations, • Evaluates installed equipment with various types of test equipment, • Understands integrated circuits and digital techniques, • Perform Ground and Flight Test Procedures Avionics Systems, • Demonstrate, to a high degree of proficiency, the ability to remove and install basic electrical / avionics system components., • Autopilot/Flight Director/Yaw Damper/VHF/HF Systems operation and checkout, • AFIS / Data-Link/Audio Integrating/Satcom Communication Systems operation and checkout, • Cockpit Voice Recorder (CVR) operation, checkout, and download procedures, • Emergency Locator Transmitter operation and checkout, • Perform Airshow configuration and update, • Download and update system databases, • Aircraft Maintenance Diagnostic Computer, • Document maintenance actions according to regulatory and organizational standards., • Understand and use of MM manuals and company paperwork such as removals and squawk sign off., • Understanding and able to use computer systems such as Corridor, ATP, Textron One view., • Class Training FAR 43-13-1A, Chapter 11, Electronic Systems Education & Experience: • High School Diploma, or equivalent required., • 2-Year Electronics Technology degree preferred, • 2+ years prior work history dealing with aircraft avionics and test equipment, • 2+ years experience working with Garmin G1000, • Experience with the following test equipment: Pitot/static tester, Nav 401L, AT 600, Oscilloscope, • Previous FBO/general aviation experience required., • Must meet the requirements of Airport Authority to be receive a badge and have no ramp restrictions Must be able to read and interpret electrical/avionics system drawings and blueprints, as well as have the ability to use hand tools and electronic test equipment. Communication Skills: Must be able to read and speak English. Must be able to communicate effectively with other personnel. Mathematical Skills: Basic math skills. Reasoning Ability: Ability to define problems, collect data, establish facts, and draw valid conclusions. Ability to interpret an extensive variety of technical instructions in mathematical or diagram form and deal with several abstract and concrete variables. Budget Responsibility: Assist department managers in maintaining a specified budget. Certificates, Licenses, Registrations: Basic computer aptitude required Physical Requirements: • Must be able to stand, stoop, kneel, crouch and crawl. Occasional periods of walking, sitting, rotation, bending, pushing, pulling, and reaching., • Frequent exposure to general shop conditions, engine noise., • Frequent exposure to aircraft exhaust, moving mechanical parts, lubricants, metals, and solvents., • Competitive salary with performance-based incentives., • Comprehensive benefits package, including health insurance and retirement plans., • Opportunities for professional growth and development. Equal Opportunity Employer, including disability and protected veteran status. Except where prohibited by state law, all offers of employment are conditioned upon successfully passing a drug test. This employer uses E-Verify.

Job Description This role is with Seneca Companies, a legacy company of OWL Services. Title: Petroleum Systems Tester II What You’ll Do: • 70%: Containment Testing; Performs a variety of fuel containment tests, equipment integrity tests, and leak-detection tests in order to detect leaks or to prevent future leaks due to non-compliance or equipment failure. Ensures all Seneca employees follow site and customer policies and procedures., • 20%: Site Inspection: Conducts inspections of equipment and sites referring to regulations, policies and customer requirements. Shares results of testing and correction procedures with company partners and customers with speed and accuracy. Provides unbiased, fact-based results and correction advice on site to provide outstanding customer service., • 5%: Safety Management: Inspects, maintains and dons personal protective equipment. Ensures peers and subcontractors are protected and has the responsibility and authority to stop work deemed unsafe. Equipment inspection, maintenance and operation. Inspects equipment before and after operation and documents deficiencies in accordance with DOT regulations and company policy. May be assigned responsibility for a single company vehicle which includes responsibilities for routine maintenance and cleaning., • 5%: Mobile-device based administration and documentation: Utilizes mobile devices to plan, track and document job data including vehicle maintenance and operation, work order progress, personnel status and working hours. Responds to a variety of communication methods such as email, text messages, phone calls and application alerts in an appropriate time frame. Completes safety training and documentation on time., • Working Hazards: Works in an environment with potential exposure to fumes, dirt, noise, equipment movement dangers, confined spaces, vibrations, dangerous chemical/solvents, electrical shock, and inclement temperature extremes., • Education: Requires a high school diploma., • Experience: 1-4 years of experience in the petroleum equipment field or in a related area., • Licenses/Certifications: HAZWOPER 40 certification and State-issued UST Inspector licenses preferred and required after hire. CDL-B or A license with hazardous waste endorsement preferred. Manufacturer's certifications for Automated Tank Gauges, Submersible Turbine Pumps, Pressurized/Mechanical/Electronic line-leak detection preferred. Once hired, employees must maintain HAZWOPER40 and state-issued inspector's licenses., • Technical Abilities: Familiar with a variety of the field's concepts, practices, and procedures. Relies on experience and judgment to plan and accomplish goals. Performs a variety of complicated tasks. Able to perform manual labor, heavy equipment inspection and operation and basic administrative tasks using mobile devices., • Autonomy/Direction: Relies on instructions and pre-established guidelines from senior Technicians in the field to perform the functions of the job. Works under intermittent supervision. Primary job functions periodically require exercising independent judgment and making tactical decisions in the field without assistance. Must have the ability to travel overnight over 50%. Must have the ability to be on-call 24-7 for emergency response on a rotational basis., • Competitive Pay, • Per Diem & Company Vehicle with Fuel Card, • Health, Dental, and Vision Insurance with optional offerings of HSA and FSA, • Paid Time Off including Vacation Time, Sick Days, Personal Days, and Holidays, • 401k with Company Match, • Company Paid Life Insurance, • Free Employee Assistance Program (EAP) and Wellness Program Who We Are OWL Services is the premier sales, installation, program management and service provider to retail, commercial, fleet, aviation and marine, and emergency power generation companies across the U.S. With 33 offices and distribution centers and more than 1,400 field service professionals, OWL delivers on a service platform that includes construction, compliance and testing, maintenance and repair, modernization and re-imaging, and EV charging solutions to keep businesses and people moving 24 hours a day, 7 days a week, 365 days a year. OWL Services’ companies have received numerous awards over the years for exemplary customer service. Most recently it was the recipient of EVgo’s Deployment Excellence Award in its first-ever class of awardees in the National EV Charging Recognition Program. Come join us! For more information visit OWLServices.com and follow us on LinkedIn. This job description is intended to describe the general nature and level of work being performed by the person assigned to this position. Principal duties and responsibilities are intended to describe those functions that are essential to the performance of this job, and “other” duties and responsibilities include those that are considered incidental or secondary to the overall purpose of this job. This job description does not state or imply that the above are the only duties and responsibilities assigned to this position. Employees holding this position will be required to perform any other job-related duties as requested by management. All requirements are subject to possible modification to reasonably accommodate individuals with a disability.

Job Description Join a team where every aircraft is a win, and every teammate makes a difference. Our boutique-style MRO is built on customer focus, employee empowerment, and hands-on excitement with every delivery. We are significantly investing in training to expand your skills, enhance your experience, and fast-track your career. If you're looking for more than a job, this is your hangar. Apply now and ask about our custom sign-on bonus. Become a part of the next big thing in MRO. Schedule: Friday-Sunday 5:00am-5:00pm • Communicate as required to receive and understand work assignments. Perform tasks completely, accurately, and in a timely manner. Ensure that work accomplished meets FAA requirements, customer specifications., • Ensure compliance with internal and FAA inspection and documentation requirements. Properly complete equipment & parts change sheets, work order sign-offs, and other paper work in a timely manner., • Properly identify (tag) and store customer property and equipment., • Installs and functionally tests electrical/avionics components and systems on aircraft per engineering specifications and drawings to ensure a defect free system. Submits work for inspection & approval., • Analyzes and repairs aircraft avionics systems such as Nav/Com, Transponder, DME, and Autopilot to the sub-assembly level utilizing aircraft & avionic manufacturer’s prints, maintenance manuals, wiring diagrams, and schematics., • Repairs or replaces defective components and wiring and performs necessary work to ensure installations meet conformity. Troubleshoots and repairs systems using acceptable practices including splicing, soldering, and wire termination., • Sets up and operates necessary test equipment. Conducts functional and operational tests to evaluate performance and reliability., • Performs minor maintenance and cleaning/adjustments of electronic/electrical components and associated equipment on the bench., • Assists other Line and Install Technicians in the aircraft as required., • Use the Corridor system to enter daily labor against correct Work Order and item numbers., • Reviews work, including forms and records, to ensure compliance with Inspection Procedures Manual, Operating Procedures and FAA regulations., • Maintains good housekeeping and safety in all areas to include hangars, break areas, and offices., • Possess a working knowledge of the Company Policies and Procedures manual, Company Inspection Procedures manual, and any pertinent process specifications., • Clearly and tactfully gets point across to others orally and in writing., • Keep shop and aircraft work areas clean and uncluttered., • Properly care for and maintain shop equipment and tools as assigned by Supervisor., • Comply with safety rules and procedures., • Contribute to an environment in which all people are respected. Education & Experience: • High School Diploma, or equivalent required., • 2- Year Electronics Technology degree, • 4 years prior work history dealing with aircraft avionics and test equipment, • 4 Years’ Experience working with Garmin G1000, • Experience with the following test equipment: Pitot/static tester, Nav 401L, AT 600, Oscilloscope, • Previous FBO/general aviation experience required. Must be able to read and interpret electrical/avionics system drawings and blueprints, as well as have the ability to use hand tools and electronic test equipment. Communication Skills: Must be able to read and speak English. Must be able to communicate effectively with other personnel. Mathematical Skills: Basic math skills. Reasoning Ability: Ability to define problems, collect data, establish facts, and draw valid conclusions. Ability to interpret an extensive variety of technical instructions in mathematical or diagram form and deal with several abstract and concrete variables. Budget Responsibility: Assist department managers in maintaining a specified budget. Certificates, Licenses, Registrations: • A & P License required; Basic computer aptitude required Physical Requirements: • Must be able to stand, stoop, kneel, crouch and crawl. Occasional periods of walking, sitting, rotation, bending, pushing, pulling, and reaching., • Frequent exposure to general shop conditions, engine noise., • Frequent exposure to aircraft exhaust, moving mechanical parts, lubricants, metals, and solvents., • Competitive salary with performance-based incentives., • Comprehensive benefits package, including health insurance and retirement plans., • Opportunities for professional growth and development. Equal Opportunity Employer, including disability and protected veteran status. Except where prohibited by state law, all offers of employment are conditioned upon successfully passing a drug test. This employer uses E-Verify. Friday-Sunday 5:00am-5:00pm

Job Description Monday - Friday 7 AM - 3:30 PM Join a team where every aircraft is a win, and every teammate makes a difference. Our boutique-style MRO is built on customer focus, employee empowerment, and hands-on excitement with every delivery. We are significantly investing in training to expand your skills, enhance your experience, and fast-track your career. If you're looking for more than a job, this is your hangar. Apply now and ask about our custom sign-on bonus. Become a part of the next big thing in MRO. Independently operate, install, adjust, and maintain integrated computer/communications systems, consoles, simulators, and instrumentation used for air and space vehicle launch, tracking, positioning, and evaluation. Configure and troubleshoot data acquisition and test measurement equipment without supervision. Accurately record, analyze, and interpret complex test data for engineering evaluation and mission readiness. Apply standard procedures to ensure system performance and reliability. • Basic understanding of wiring diagrams and methodology: wire marking, wire routing clamping, symbols, and simple interconnect diagrams, bonding/grounding, • Basic understanding of avionics hardware removal and replacement: equipment racks, mounting structures, standard fasteners, • Documentation and Regulatory Compliance: understand and use of MM manuals and company paperwork such as removals and squawk sign off., • Understanding and able to use computer systems such as Corridor, ATP, Textron One view., • Basic Understanding of Avionics test equipment: Multimeter, Laversab Air data tester, Barfield Air data tester, Druck Air data tester, GE Air data tester, IFR4000/6000, TRX, • Thoroughly understand the fundamental principles and accurately demonstrate the correct procedures for grounding an aircraft., • Demonstrate the proper procedures and safety precautions to apply power to an aircraft, • Demonstrate a thorough understanding of the fundamental principles and correctly perform the procedures for removing and replacing avionics hardware., • Demonstrate a thorough understanding of fundamental principles and accurately perform the proper procedures for installing airframe components., • Exhibit in-depth knowledge of torque principles and correctly apply proper torquing procedures for threaded fasteners and plumbing lines., • Fully understand and correctly execute the procedures for inspecting, removing, and installing safety devices, including AMSafe components., • Ability to safely operate a digital or analog multimeter to measure voltage, resistance, and continuity in avionics circuits. Understanding test lead configuration, range selection, and safety precautions. Can interpret basic readings and identify common faults in wiring or components with minimal guidance., • Able to set up and operate the Laversab Air Data Test Set for pitot-static system checks. Understands basic test sequences, menu navigation, pressure calibration functions, and can verify airspeed, altitude, and vertical speed parameters. Can detect leaks or discrepancies and interpret displayed data under supervision., • Proficient in configuring and using the Barfield Air Data Tester to simulate and verify pitot-static inputs. Understands connections to aircraft test ports, performs altitude and airspeed sweeps, and monitors pressure decay/leakage. Able to operate the tester through standard procedures and recognize abnormal responses during functional tests., • Capable of independently performing basic test functions with the Druck unit, including automated test scripts for altimetry, airspeed indicators, and static systems. Understands parameter input, reference value comparison, and test documentation. Can troubleshoot common interface or pressure issues., • Understands the operational workflow of the GE Air Data Tester, including initiating and controlling tests for pitot-static validation. Able to conduct altitude and airspeed checks, input test parameters, and interpret test results in relation to maintenance manuals. Can assist with calibration procedures and report data accurately., • Demonstrates the ability to set up and operate the IFR4000/6000 or TRX test sets to evaluate transponder, DME, TCAS, and communication systems. Understands test modes, antenna connections, and functional test procedures per manufacturer specifications. Can interpret pass/fail results, adjust signal parameters, and verify system compliance with minimal oversight., • Able to configure and operate a TCAS test set to perform system interrogations, verify bearing accuracy, and simulate traffic scenarios. Understand aircraft interface connections, test range limits, and can evaluate system response under test conditions. Capable of identifying common system faults and validating TCAS functionality in line with maintenance procedures., • Comprehend in depth the basic principles and demonstrate, to a high degree of proficiency, the ability to use a volt / ohmmeter., • Comprehend in depth the basic principles and demonstrate, to a high degree of proficiency, the ability to perform slip torque checkout of autopilot servos, • Installs various communication / navigation equipment, • Fabricates electrical connectors and wire bundles, • Fabricate Coax Cable assemblies and terminations, • Evaluates installed equipment with various types of test equipment, • Understands integrated circuits and digital techniques, • Perform Ground and Flight Test Procedures Avionics Systems, • Demonstrate, to a high degree of proficiency, the ability to remove and install basic electrical / avionics system components., • Autopilot/Flight Director/Yaw Damper/VHF/HF Systems operation and checkout, • AFIS / Data-Link/Audio Integrating/Satcom Communication Systems operation and checkout, • Cockpit Voice Recorder (CVR) operation, checkout, and download procedures, • Emergency Locator Transmitter operation and checkout, • Perform Airshow configuration and update, • Download and update system databases, • Aircraft Maintenance Diagnostic Computer, • Document maintenance actions according to regulatory and organizational standards., • Understand and use of MM manuals and company paperwork such as removals and squawk sign off., • Understanding and able to use computer systems such as Corridor, ATP, Textron One view., • Class Training FAR 43-13-1A, Chapter 11, Electronic Systems Education & Experience: • High School Diploma, or equivalent required., • 2-Year Electronics Technology degree preferred, • 2+ years prior work history dealing with aircraft avionics and test equipment, • 2+ years experience working with Garmin G1000, • Experience with the following test equipment: Pitot/static tester, Nav 401L, AT 600, Oscilloscope, • Previous FBO/general aviation experience required., • Must meet the requirements of Airport Authority to be receive a badge and have no ramp restrictions Must be able to read and interpret electrical/avionics system drawings and blueprints, as well as have the ability to use hand tools and electronic test equipment. Communication Skills: Must be able to read and speak English. Must be able to communicate effectively with other personnel. Mathematical Skills: Basic math skills. Reasoning Ability: Ability to define problems, collect data, establish facts, and draw valid conclusions. Ability to interpret an extensive variety of technical instructions in mathematical or diagram form and deal with several abstract and concrete variables. Budget Responsibility: Assist department managers in maintaining a specified budget. Certificates, Licenses, Registrations: Basic computer aptitude required Physical Requirements: • Must be able to stand, stoop, kneel, crouch and crawl. Occasional periods of walking, sitting, rotation, bending, pushing, pulling, and reaching., • Frequent exposure to general shop conditions, engine noise., • Frequent exposure to aircraft exhaust, moving mechanical parts, lubricants, metals, and solvents., • Competitive salary with performance-based incentives., • Comprehensive benefits package, including health insurance and retirement plans., • Opportunities for professional growth and development. Equal Opportunity Employer, including disability and protected veteran status. Except where prohibited by state law, all offers of employment are conditioned upon successfully passing a drug test. This employer uses E-Verify.

As a Senior Technology Product Manager for Wolters Kluwer, you'll own a critical piece of the Professional Audit workflow, a critical SaaS platform within the CCH Tax & Accounting brand.You won't just define features; you'll be responsible for making the product successful.This role is for someone w