Trabajos tester en Charlotte, North CarolinaCrear alertas

Position Description Torque by Ryder is Immediately hiring a Permanent Full Time Experienced Mobile Diesel and Auto Technician to support our Truck Fleet in Charlotte, NC For More Info Call Jordon or Text "Charlotte NC" to 904-489-7273 Hear it from a Torque Mobile Mechanic Technician Here: • Technician Positions Pay Each Week, • Hourly Pay: $31.00 - $35.00 per hour based on experience, • Ability to earn additional monthly performance incentive, • Schedule: Flexible 40-hour work week (weekend premiums apply), • Fuel Card and Company Cell Phone provided, • For mobile technicians, work site service vehicle will be provided We want the right Maintenance Repair Mechanic Technician to join us at Ryder manage our fleet of Heavy Duty Trucks. At Ryder, we offer outstanding benefits: • Generous Paid Time Off, • Medical, Dental and Vision Insurance effective 30 days from hire date, • Life Insurance and Disability Insurance Options, • 401K Savings Plan with Ryder matching contributions, • Discount on purchase of Ryder Common Stock, • Employee Discounts on Automotive, Mobile plans, Travel and Hotels, • Accredited Tech School Tuition Reimbursement, • PPE & Uniforms provided at no cost, • Paid Job training and development Click Here to See All Ryder Careers: EEO/AA/Female/Minority/Disabled/Veteran Requirements • High school diploma or equivalent preferred, • Vocational or Technical Certification Post Secondary degree or Technical Certifications, preferred, • Basic tools required, • Requires demonstrated aptitude and applied experience in mechanical repair of automotive gas or diesel engines including:, • Routine preventative maintenance, which should include oil changes, brake and tire work, • Diagnostics and repairs, including AC, electrical systems, • Advanced skilled level repairs to include some major engine repairs, diesel after treatment or automotive fuel injection repairs, • Three (3) years or more relevant work experience, preferred, • NonCommercial Driver License CLASS E, preferred, • Valid Commercial Driver License (CDL) CLASS A, preferred, • Other State driver's license, as required, • Two (2) years or more experience with mechanical repairs and diagnostics on heavy duty and medium duty equipment, • Able to take home assigned mobile service truck, as applicable, and secure vehicle and contents, • Must be able to drive Ryder vehicles, • Ability to:, • Understand and adhere to Company policies in all areas, • Complete repair orders with the Company established systems, • Create and maintain professional relationships within all levels of the organization (peers, work groups, customers, supervisors), • Work independently and as a member of a team, • Prioritize workload, • Proven hands-on mechanic, customer service, and account management skills, • Demonstrates customer service skills, • Strong relationship management skills, • Strong verbal and written communication skills, • Flexibility to operate and self-driven to excel in a fast-paced environment, • Self-starter and self-sufficient approach, • Capable of multi-tasking, highly organized, with excellent time management skills, • Detailed oriented with excellent follow-up practices, • Entrepreneurial spirit, • Preventive Maintenance (PM230&PM298) within 90 Days, • Brakes-Air (BA220&BA298) within 90 Days, • Brake mechanics/inspectors FMCS 396.25, • Hydraulic Brake (BH220&BH298) where appropriate within 90 Days, • Tire & Wheel TW220 within 90 Days, • CF609 & A/C trained and qualified (AC220&AC298) within 180 Days, • HD electrical - DR208 within 90 Days, • Svc Island Support SBTIII trained (SBT220) and SBT Phase 2 within 180 Days, • Complete 2 of the OEM On-Line diagnostic tool software courses as required by location fleet mi. (predominant OEM of fleet mix), • This position requires for you to drive Ryder vehicles. In order to become a Ryder employee you must:, • Pass a Ryder Drug Test, • Pass a DOT physical, • Pass a Ryder road test Responsibilities • Interact with customer, exhibit account management skills to independently facilitate preventative maintenance, repair issue resolution, and discuss new repair estimates with customer., • Coordinate work schedule as required by customers. Road test vehicles to identify cause of complaints for repairs, ensure quality of repair work performed, and deliver customer satisfaction., • Preventive maintenance (PM) and vehicle repairs responsibilities include but is not limited to:, • A/C & Heater: Operate the system and recognize if the system is cooling or not (PM related); Perform system checks such as power to compressor, visual inspection of condenser, belt tension, etc; Identify Freon and oil leaks, • Brakes-Air: Identify components of air brake system; Operate brakes and identify irregular noises, air leaks; Perform simple air system tests; Measure lining thickness; Adjust brakes; Perform air brake sections of P.M.; Measure drums, rotors, cam bushings Perform brake repairs per (BA298) once trained and qualified, • Brakes-Hydraulic: Road test for proper operation; Make visual inspections for leaks; Check park brake operation; Check fluid level; Measure lining thickness; Adjust service brakes; Perform brake repairs per (BH298) once trained and qualified; Adjust park brakes, • Cargo Handling/Transfer, Liftgates: Identify leaks; Operate lift gate; Identify make and model; Add fluid to bring to proper level; Make minor adjustments to lift platform and its controls; Identify basic malfunctions, • Charging Systems (electrical): Visually inspect batteries; Clean connections; Check condition of belts; Test batteries; Check alternator mounting and pulley; Replace and adjust belts; Perform basic charging system check, • Clutch: Lubricate throw-out bearing, linkage, shafts, and cables; Identify proper clutch operation; Identify proper clutch brake operation, • Cooling Systems: Check and adjust coolant levels; Visually inspect system for leaks; Make minor repairs such as hose replacements, fan shrouds, leaking fittings; Recognize permanent antifreezes and their requirements; Use refractometer; Use pressure tester; Flush and refill systems, • Cranking System (electrical): Inspect and test batteries; Visually inspect cables and cranking motor; Clean the battery cables, connections and starter; Replace batteries; Charge and check batteries; Replace or repair defective cables, • Lighting System and Electrical Accessories: Repair minor wiring problems; Replace bulbs, lenses and simple light assemblies; Repair minor lighting problems; Replace and adjust sealed beams; Install or replace accessories such as heated mirrors, fans, spotlights, • Drive Axles: Inspect housings for leaks; Change oil and filter, if required, and clean breathers, • Driveline: Lubricate drive line; Inspect components for wear or damage, • Gas Engines-All Engines: Check and adjust oil levels; Identify unusual noises, and oil leaks, • Fuel Systems: Replace and prime fuel filter; Check gas and diesel fuel system components such as fuel lines, pickup tubes, return lines, etc, for proper integrity and condition, • Preventive Maintenance: Proper lube techniques; Minimal tire inspection; Brake check/applied stroke; Battery check; Under vehicle check/loose components; Initial Fault code identification; All PMs (PM298) including C supplements to exclude overheads, engine brake overhauls, DPF servicing, clean doser injector, servicing ArvinMeritor unitized hubs, inspect Lece Neville alternator brushes, inspect modulator system for proper operation, inspect/adjust shift selector cable, pop test Isuzu injectors, • Steering and Non-driven Axles and Alignment: Lubricate grease fittings, check and adjust fluid levels; Check and adjust toe; Check all steering components for wear; Check and adjust trailer axle alignment; Adjust wheel bearings including replacement of wheel seal, • Suspension-Chassis and Cab: Identify makes and models; Identify normal operation; Identify and repair minor air leaks; Identify malfunctions of basic nature, broken springs, excessive wear on bushings, etc, • Tire and Wheel Maintenance: Perform air pressure checks; Check tread depth; Identify tires that need to be changed or repaired; Perform tire P.M. checks; Replace tire and wheel assemblies; Mount/dismount and rotate tires; Perform tire/wheel checks/repairs per (TW298), • Vehicle Coupling System (PM): Lubricate fifth wheel plate and slider mechanism; Operate slider mechanism, • Utilize key functions of Shop Management System and electronic documentation available. Perform work in accordance with all federal/provincial and corporate compliance guidelines (i.e. safety, DOT). Use internal and external maintenance documents, • Performs other duties as assigned., • Ensure proper maintenance of all service, safety and environmental records required to meet and/or exceed corporate, federal, state, and local government mandated requirements., • Accountable for key maintenance measurements established by company policy, related to the inspection and performance of PMs, brakes, tires, wheels, including any maintenance items directly associated with the safety of the customer. Posted Date 3 hours ago (9/2/2025 5:10 PM) Requisition ID 2025-187390 Location (Posting Location) : State/Province NC Location (Posting Location) : City CHARLOTTE Location (Posting Location) : Postal Code 28201 Category Technicians/Service Employees9 Employment Type Regular-Full time Travel Requirements Greater than 60% Position Code 1001311 Min Pay USD $31.00/Hr. Max Pay USD $35.00/Hr.

Position Description Torque by Ryder is Immediately hiring a Permanent Full Time Experienced Mobile Diesel/Automotive Technician to support our Truck Fleet in Charlotte, NC Hear it from a Torque Mobile Mechanic Technician Here: • Technician Positions Pay Each Week, • Hourly Pay: $31.00 - $34.50 per hour based on experience, • Ability to earn additional monthly performance incentive, • Schedule: Flexible 40-hour work week (weekend premiums apply), • Fuel Card and Company Cell Phone provided, • For mobile technicians, work site service vehicle will be provided At Ryder, we offer outstanding benefits: • Generous Paid Time Off, • Medical, Dental and Vision Insurance effective 30 days from hire date, • Life Insurance and Disability Insurance Options, • 401K Savings Plan with Ryder matching contributions, • Discount on purchase of Ryder Common Stock, • Employee Discounts on Automotive, Mobile plans, Travel and Hotels, • Accredited Tech School Tuition Reimbursement, • PPE & Uniforms provided at no cost, • Paid Job training and development Click Here to See All Ryder Careers: EEO/AA/Female/Minority/Disabled/Veteran Requirements • High school diploma or equivalent preferred, • Vocational or Technical Certification Post Secondary degree or Technical Certifications, preferred, • Basic tools required, • Requires demonstrated aptitude and applied experience in mechanical repair of automotive gas or diesel engines including:, • Routine preventative maintenance, which should include oil changes, brake and tire work, • Diagnostics and repairs, including AC, electrical systems, • Advanced skilled level repairs to include some major engine repairs, diesel after treatment or automotive fuel injection repairs, • Three (3) years or more relevant work experience, preferred, • NonCommercial Driver License CLASS E, preferred, • Valid Commercial Driver License (CDL) CLASS A, preferred, • Other State driver's license, as required, • Two (2) years or more experience with mechanical repairs and diagnostics on heavy duty and medium duty equipment, • Able to take home assigned mobile service truck, as applicable, and secure vehicle and contents, • Must be able to drive Ryder vehicles, • Ability to:, • Understand and adhere to Company policies in all areas, • Complete repair orders with the Company established systems, • Create and maintain professional relationships within all levels of the organization (peers, work groups, customers, supervisors), • Work independently and as a member of a team, • Prioritize workload, • Proven hands-on mechanic, customer service, and account management skills, • Demonstrates customer service skills, • Strong relationship management skills, • Strong verbal and written communication skills, • Flexibility to operate and self-driven to excel in a fast-paced environment, • Self-starter and self-sufficient approach, • Capable of multi-tasking, highly organized, with excellent time management skills, • Detailed oriented with excellent follow-up practices, • Entrepreneurial spirit, • Preventive Maintenance (PM230&PM298) within 90 Days, • Brakes-Air (BA220&BA298) within 90 Days, • Brake mechanics/inspectors FMCS 396.25, • Hydraulic Brake (BH220&BH298) where appropriate within 90 Days, • Tire & Wheel TW220 within 90 Days, • CF609 & A/C trained and qualified (AC220&AC298) within 180 Days, • HD electrical - DR208 within 90 Days, • Svc Island Support SBTIII trained (SBT220) and SBT Phase 2 within 180 Days, • Complete 2 of the OEM On-Line diagnostic tool software courses as required by location fleet mi. (predominant OEM of fleet mix), • This position requires for you to drive Ryder vehicles. In order to become a Ryder employee you must:, • Pass a Ryder Drug Test, • Pass a DOT physical, • Pass a Ryder road test Responsibilities • Interact with customer, exhibit account management skills to independently facilitate preventative maintenance, repair issue resolution, and discuss new repair estimates with customer., • Coordinate work schedule as required by customers. Road test vehicles to identify cause of complaints for repairs, ensure quality of repair work performed, and deliver customer satisfaction., • Preventive maintenance (PM) and vehicle repairs responsibilities include but is not limited to:, • A/C & Heater: Operate the system and recognize if the system is cooling or not (PM related); Perform system checks such as power to compressor, visual inspection of condenser, belt tension, etc; Identify Freon and oil leaks, • Brakes-Air: Identify components of air brake system; Operate brakes and identify irregular noises, air leaks; Perform simple air system tests; Measure lining thickness; Adjust brakes; Perform air brake sections of P.M.; Measure drums, rotors, cam bushings Perform brake repairs per (BA298) once trained and qualified, • Brakes-Hydraulic: Road test for proper operation; Make visual inspections for leaks; Check park brake operation; Check fluid level; Measure lining thickness; Adjust service brakes; Perform brake repairs per (BH298) once trained and qualified; Adjust park brakes, • Cargo Handling/Transfer, Liftgates: Identify leaks; Operate lift gate; Identify make and model; Add fluid to bring to proper level; Make minor adjustments to lift platform and its controls; Identify basic malfunctions, • Charging Systems (electrical): Visually inspect batteries; Clean connections; Check condition of belts; Test batteries; Check alternator mounting and pulley; Replace and adjust belts; Perform basic charging system check, • Clutch: Lubricate throw-out bearing, linkage, shafts, and cables; Identify proper clutch operation; Identify proper clutch brake operation, • Cooling Systems: Check and adjust coolant levels; Visually inspect system for leaks; Make minor repairs such as hose replacements, fan shrouds, leaking fittings; Recognize permanent antifreezes and their requirements; Use refractometer; Use pressure tester; Flush and refill systems, • Cranking System (electrical): Inspect and test batteries; Visually inspect cables and cranking motor; Clean the battery cables, connections and starter; Replace batteries; Charge and check batteries; Replace or repair defective cables, • Lighting System and Electrical Accessories: Repair minor wiring problems; Replace bulbs, lenses and simple light assemblies; Repair minor lighting problems; Replace and adjust sealed beams; Install or replace accessories such as heated mirrors, fans, spotlights, • Drive Axles: Inspect housings for leaks; Change oil and filter, if required, and clean breathers, • Driveline: Lubricate drive line; Inspect components for wear or damage, • Gas Engines-All Engines: Check and adjust oil levels; Identify unusual noises, and oil leaks, • Fuel Systems: Replace and prime fuel filter; Check gas and diesel fuel system components such as fuel lines, pickup tubes, return lines, etc, for proper integrity and condition, • Preventive Maintenance: Proper lube techniques; Minimal tire inspection; Brake check/applied stroke; Battery check; Under vehicle check/loose components; Initial Fault code identification; All PMs (PM298) including C supplements to exclude overheads, engine brake overhauls, DPF servicing, clean doser injector, servicing ArvinMeritor unitized hubs, inspect Lece Neville alternator brushes, inspect modulator system for proper operation, inspect/adjust shift selector cable, pop test Isuzu injectors, • Steering and Non-driven Axles and Alignment: Lubricate grease fittings, check and adjust fluid levels; Check and adjust toe; Check all steering components for wear; Check and adjust trailer axle alignment; Adjust wheel bearings including replacement of wheel seal, • Suspension-Chassis and Cab: Identify makes and models; Identify normal operation; Identify and repair minor air leaks; Identify malfunctions of basic nature, broken springs, excessive wear on bushings, etc, • Tire and Wheel Maintenance: Perform air pressure checks; Check tread depth; Identify tires that need to be changed or repaired; Perform tire P.M. checks; Replace tire and wheel assemblies; Mount/dismount and rotate tires; Perform tire/wheel checks/repairs per (TW298), • Vehicle Coupling System (PM): Lubricate fifth wheel plate and slider mechanism; Operate slider mechanism, • Utilize key functions of Shop Management System and electronic documentation available. Perform work in accordance with all federal/provincial and corporate compliance guidelines (i.e. safety, DOT). Use internal and external maintenance documents, • Performs other duties as assigned., • Ensure proper maintenance of all service, safety and environmental records required to meet and/or exceed corporate, federal, state, and local government mandated requirements., • Accountable for key maintenance measurements established by company policy, related to the inspection and performance of PMs, brakes, tires, wheels, including any maintenance items directly associated with the safety of the customer. Posted Date 1 week ago (8/20/2025 4:34 PM) Requisition ID 2025-186674 Location (Posting Location) : State/Province NC Location (Posting Location) : City CHARLOTTE Location (Posting Location) : Postal Code 28201 Category Technicians/Service Employees9 Employment Type Regular-Full time Travel Requirements Greater than 60% Position Code 1001311 Min Pay USD $31.00/Hr. Max Pay USD $34.50/Hr.

Position Description Torque by Ryder is Immediately hiring a Permanent Full Time Experienced Mobile Diesel and Auto Technician to support our Truck Fleet in Charlotte, NC Hear it from a Torque Mobile Mechanic Technician Here: • Technician Positions Pay Each Week, • Hourly Pay: $31.00 - $35.00 per hour based on experience, • Ability to earn additional monthly performance incentive, • Schedule: Flexible 40-hour work week (weekend premiums apply), • Fuel Card and Company Cell Phone provided, • For mobile technicians, work site service vehicle will be provided At Ryder, we offer outstanding benefits: • Generous Paid Time Off, • Medical, Dental and Vision Insurance effective 30 days from hire date, • Life Insurance and Disability Insurance Options, • 401K Savings Plan with Ryder matching contributions, • Discount on purchase of Ryder Common Stock, • Employee Discounts on Automotive, Mobile plans, Travel and Hotels, • Accredited Tech School Tuition Reimbursement, • PPE & Uniforms provided at no cost, • Paid Job training and development Click Here to See All Ryder Careers: EEO/AA/Female/Minority/Disabled/Veteran Requirements • High school diploma or equivalent preferred, • Vocational or Technical Certification Post Secondary degree or Technical Certifications, preferred, • Basic tools required, • Requires demonstrated aptitude and applied experience in mechanical repair of automotive gas or diesel engines including:, • Routine preventative maintenance, which should include oil changes, brake and tire work, • Diagnostics and repairs, including AC, electrical systems, • Advanced skilled level repairs to include some major engine repairs, diesel after treatment or automotive fuel injection repairs, • Three (3) years or more relevant work experience, preferred, • NonCommercial Driver License CLASS E, preferred, • Valid Commercial Driver License (CDL) CLASS A, preferred, • Other State driver's license, as required, • Two (2) years or more experience with mechanical repairs and diagnostics on heavy duty and medium duty equipment, • Able to take home assigned mobile service truck, as applicable, and secure vehicle and contents, • Must be able to drive Ryder vehicles, • Ability to:, • Understand and adhere to Company policies in all areas, • Complete repair orders with the Company established systems, • Create and maintain professional relationships within all levels of the organization (peers, work groups, customers, supervisors), • Work independently and as a member of a team, • Prioritize workload, • Proven hands-on mechanic, customer service, and account management skills, • Demonstrates customer service skills, • Strong relationship management skills, • Strong verbal and written communication skills, • Flexibility to operate and self-driven to excel in a fast-paced environment, • Self-starter and self-sufficient approach, • Capable of multi-tasking, highly organized, with excellent time management skills, • Detailed oriented with excellent follow-up practices, • Entrepreneurial spirit, • Preventive Maintenance (PM230&PM298) within 90 Days, • Brakes-Air (BA220&BA298) within 90 Days, • Brake mechanics/inspectors FMCS 396.25, • Hydraulic Brake (BH220&BH298) where appropriate within 90 Days, • Tire & Wheel TW220 within 90 Days, • CF609 & A/C trained and qualified (AC220&AC298) within 180 Days, • HD electrical - DR208 within 90 Days, • Svc Island Support SBTIII trained (SBT220) and SBT Phase 2 within 180 Days, • Complete 2 of the OEM On-Line diagnostic tool software courses as required by location fleet mi. (predominant OEM of fleet mix), • This position requires for you to drive Ryder vehicles. In order to become a Ryder employee you must:, • Pass a Ryder Drug Test, • Pass a DOT physical, • Pass a Ryder road test Responsibilities • Interact with customer, exhibit account management skills to independently facilitate preventative maintenance, repair issue resolution, and discuss new repair estimates with customer., • Coordinate work schedule as required by customers. Road test vehicles to identify cause of complaints for repairs, ensure quality of repair work performed, and deliver customer satisfaction., • Preventive maintenance (PM) and vehicle repairs responsibilities include but is not limited to:, • A/C & Heater: Operate the system and recognize if the system is cooling or not (PM related); Perform system checks such as power to compressor, visual inspection of condenser, belt tension, etc; Identify Freon and oil leaks, • Brakes-Air: Identify components of air brake system; Operate brakes and identify irregular noises, air leaks; Perform simple air system tests; Measure lining thickness; Adjust brakes; Perform air brake sections of P.M.; Measure drums, rotors, cam bushings Perform brake repairs per (BA298) once trained and qualified, • Brakes-Hydraulic: Road test for proper operation; Make visual inspections for leaks; Check park brake operation; Check fluid level; Measure lining thickness; Adjust service brakes; Perform brake repairs per (BH298) once trained and qualified; Adjust park brakes, • Cargo Handling/Transfer, Liftgates: Identify leaks; Operate lift gate; Identify make and model; Add fluid to bring to proper level; Make minor adjustments to lift platform and its controls; Identify basic malfunctions, • Charging Systems (electrical): Visually inspect batteries; Clean connections; Check condition of belts; Test batteries; Check alternator mounting and pulley; Replace and adjust belts; Perform basic charging system check, • Clutch: Lubricate throw-out bearing, linkage, shafts, and cables; Identify proper clutch operation; Identify proper clutch brake operation, • Cooling Systems: Check and adjust coolant levels; Visually inspect system for leaks; Make minor repairs such as hose replacements, fan shrouds, leaking fittings; Recognize permanent antifreezes and their requirements; Use refractometer; Use pressure tester; Flush and refill systems, • Cranking System (electrical): Inspect and test batteries; Visually inspect cables and cranking motor; Clean the battery cables, connections and starter; Replace batteries; Charge and check batteries; Replace or repair defective cables, • Lighting System and Electrical Accessories: Repair minor wiring problems; Replace bulbs, lenses and simple light assemblies; Repair minor lighting problems; Replace and adjust sealed beams; Install or replace accessories such as heated mirrors, fans, spotlights, • Drive Axles: Inspect housings for leaks; Change oil and filter, if required, and clean breathers, • Driveline: Lubricate drive line; Inspect components for wear or damage, • Gas Engines-All Engines: Check and adjust oil levels; Identify unusual noises, and oil leaks, • Fuel Systems: Replace and prime fuel filter; Check gas and diesel fuel system components such as fuel lines, pickup tubes, return lines, etc, for proper integrity and condition, • Preventive Maintenance: Proper lube techniques; Minimal tire inspection; Brake check/applied stroke; Battery check; Under vehicle check/loose components; Initial Fault code identification; All PMs (PM298) including C supplements to exclude overheads, engine brake overhauls, DPF servicing, clean doser injector, servicing ArvinMeritor unitized hubs, inspect Lece Neville alternator brushes, inspect modulator system for proper operation, inspect/adjust shift selector cable, pop test Isuzu injectors, • Steering and Non-driven Axles and Alignment: Lubricate grease fittings, check and adjust fluid levels; Check and adjust toe; Check all steering components for wear; Check and adjust trailer axle alignment; Adjust wheel bearings including replacement of wheel seal, • Suspension-Chassis and Cab: Identify makes and models; Identify normal operation; Identify and repair minor air leaks; Identify malfunctions of basic nature, broken springs, excessive wear on bushings, etc, • Tire and Wheel Maintenance: Perform air pressure checks; Check tread depth; Identify tires that need to be changed or repaired; Perform tire P.M. checks; Replace tire and wheel assemblies; Mount/dismount and rotate tires; Perform tire/wheel checks/repairs per (TW298), • Vehicle Coupling System (PM): Lubricate fifth wheel plate and slider mechanism; Operate slider mechanism, • Utilize key functions of Shop Management System and electronic documentation available. Perform work in accordance with all federal/provincial and corporate compliance guidelines (i.e. safety, DOT). Use internal and external maintenance documents, • Performs other duties as assigned., • Ensure proper maintenance of all service, safety and environmental records required to meet and/or exceed corporate, federal, state, and local government mandated requirements., • Accountable for key maintenance measurements established by company policy, related to the inspection and performance of PMs, brakes, tires, wheels, including any maintenance items directly associated with the safety of the customer. Posted Date 3 weeks ago (8/5/2025 10:33 AM) Requisition ID 2025-185771 Location (Posting Location) : State/Province NC Location (Posting Location) : City CHARLOTTE Location (Posting Location) : Postal Code 28201 Category Technicians/Service Employees9 Employment Type Regular-Full time Travel Requirements Greater than 60% Position Code 1001311 Min Pay USD $31.00/Hr. Max Pay USD $35.00/Hr.

Position Description Torque by Ryder is Immediately hiring a Permanent Full Time Experienced Mobile Diesel/Automotive Technician to support our Truck Fleet in Charlotte, NC For More Info Call Dominique or Text "Charlotte MS3" to 904-541-9562 Hear it from a Torque Mobile Mechanic Technician Here: • Technician Positions Pay Each Week, • Hourly Pay: $31.00 - $34.50 per hour based on experience, • Ability to earn additional monthly performance incentive, • Schedule: Flexible 40-hour work week (weekend premiums apply), • Fuel Card and Company Cell Phone provided, • For mobile technicians, work site service vehicle will be provided For More Info Call Dominique or Text "Charlotte MS3" to 904-541-9562 At Ryder, we offer outstanding benefits: • Generous Paid Time Off, • Medical, Dental and Vision Insurance effective 30 days from hire date, • Life Insurance and Disability Insurance Options, • 401K Savings Plan with Ryder matching contributions, • Discount on purchase of Ryder Common Stock, • Employee Discounts on Automotive, Mobile plans, Travel and Hotels, • Accredited Tech School Tuition Reimbursement, • PPE & Uniforms provided at no cost, • Paid Job training and development For More Info Call Dominique or Text "Charlotte MS3" to 904-541-9562 Click Here to See All Ryder Careers: EEO/AA/Female/Minority/Disabled/Veteran Requirements • High school diploma or equivalent preferred, • Vocational or Technical Certification Post Secondary degree or Technical Certifications, preferred, • Basic tools required, • Requires demonstrated aptitude and applied experience in mechanical repair of automotive gas or diesel engines including:, • Routine preventative maintenance, which should include oil changes, brake and tire work, • Diagnostics and repairs, including AC, electrical systems, • Advanced skilled level repairs to include some major engine repairs, diesel after treatment or automotive fuel injection repairs, • Three (3) years or more relevant work experience, preferred, • NonCommercial Driver License CLASS E, preferred, • Valid Commercial Driver License (CDL) CLASS A, preferred, • Other State driver's license, as required, • Two (2) years or more experience with mechanical repairs and diagnostics on heavy duty and medium duty equipment, • Able to take home assigned mobile service truck, as applicable, and secure vehicle and contents, • Must be able to drive Ryder vehicles, • Ability to:, • Understand and adhere to Company policies in all areas, • Complete repair orders with the Company established systems, • Create and maintain professional relationships within all levels of the organization (peers, work groups, customers, supervisors), • Work independently and as a member of a team, • Prioritize workload, • Proven hands-on mechanic, customer service, and account management skills, • Demonstrates customer service skills, • Strong relationship management skills, • Strong verbal and written communication skills, • Flexibility to operate and self-driven to excel in a fast-paced environment, • Self-starter and self-sufficient approach, • Capable of multi-tasking, highly organized, with excellent time management skills, • Detailed oriented with excellent follow-up practices, • Entrepreneurial spirit, • Preventive Maintenance (PM230&PM298) within 90 Days, • Brakes-Air (BA220&BA298) within 90 Days, • Brake mechanics/inspectors FMCS 396.25, • Hydraulic Brake (BH220&BH298) where appropriate within 90 Days, • Tire & Wheel TW220 within 90 Days, • CF609 & A/C trained and qualified (AC220&AC298) within 180 Days, • HD electrical - DR208 within 90 Days, • Svc Island Support SBTIII trained (SBT220) and SBT Phase 2 within 180 Days, • Complete 2 of the OEM On-Line diagnostic tool software courses as required by location fleet mi. (predominant OEM of fleet mix), • This position requires for you to drive Ryder vehicles. In order to become a Ryder employee you must:, • Pass a Ryder Drug Test, • Pass a DOT physical, • Pass a Ryder road test Responsibilities • Interact with customer, exhibit account management skills to independently facilitate preventative maintenance, repair issue resolution, and discuss new repair estimates with customer., • Coordinate work schedule as required by customers. Road test vehicles to identify cause of complaints for repairs, ensure quality of repair work performed, and deliver customer satisfaction., • Preventive maintenance (PM) and vehicle repairs responsibilities include but is not limited to:, • A/C & Heater: Operate the system and recognize if the system is cooling or not (PM related); Perform system checks such as power to compressor, visual inspection of condenser, belt tension, etc; Identify Freon and oil leaks, • Brakes-Air: Identify components of air brake system; Operate brakes and identify irregular noises, air leaks; Perform simple air system tests; Measure lining thickness; Adjust brakes; Perform air brake sections of P.M.; Measure drums, rotors, cam bushings Perform brake repairs per (BA298) once trained and qualified, • Brakes-Hydraulic: Road test for proper operation; Make visual inspections for leaks; Check park brake operation; Check fluid level; Measure lining thickness; Adjust service brakes; Perform brake repairs per (BH298) once trained and qualified; Adjust park brakes, • Cargo Handling/Transfer, Liftgates: Identify leaks; Operate lift gate; Identify make and model; Add fluid to bring to proper level; Make minor adjustments to lift platform and its controls; Identify basic malfunctions, • Charging Systems (electrical): Visually inspect batteries; Clean connections; Check condition of belts; Test batteries; Check alternator mounting and pulley; Replace and adjust belts; Perform basic charging system check, • Clutch: Lubricate throw-out bearing, linkage, shafts, and cables; Identify proper clutch operation; Identify proper clutch brake operation, • Cooling Systems: Check and adjust coolant levels; Visually inspect system for leaks; Make minor repairs such as hose replacements, fan shrouds, leaking fittings; Recognize permanent antifreezes and their requirements; Use refractometer; Use pressure tester; Flush and refill systems, • Cranking System (electrical): Inspect and test batteries; Visually inspect cables and cranking motor; Clean the battery cables, connections and starter; Replace batteries; Charge and check batteries; Replace or repair defective cables, • Lighting System and Electrical Accessories: Repair minor wiring problems; Replace bulbs, lenses and simple light assemblies; Repair minor lighting problems; Replace and adjust sealed beams; Install or replace accessories such as heated mirrors, fans, spotlights, • Drive Axles: Inspect housings for leaks; Change oil and filter, if required, and clean breathers, • Driveline: Lubricate drive line; Inspect components for wear or damage, • Gas Engines-All Engines: Check and adjust oil levels; Identify unusual noises, and oil leaks, • Fuel Systems: Replace and prime fuel filter; Check gas and diesel fuel system components such as fuel lines, pickup tubes, return lines, etc, for proper integrity and condition, • Preventive Maintenance: Proper lube techniques; Minimal tire inspection; Brake check/applied stroke; Battery check; Under vehicle check/loose components; Initial Fault code identification; All PMs (PM298) including C supplements to exclude overheads, engine brake overhauls, DPF servicing, clean doser injector, servicing ArvinMeritor unitized hubs, inspect Lece Neville alternator brushes, inspect modulator system for proper operation, inspect/adjust shift selector cable, pop test Isuzu injectors, • Steering and Non-driven Axles and Alignment: Lubricate grease fittings, check and adjust fluid levels; Check and adjust toe; Check all steering components for wear; Check and adjust trailer axle alignment; Adjust wheel bearings including replacement of wheel seal, • Suspension-Chassis and Cab: Identify makes and models; Identify normal operation; Identify and repair minor air leaks; Identify malfunctions of basic nature, broken springs, excessive wear on bushings, etc, • Tire and Wheel Maintenance: Perform air pressure checks; Check tread depth; Identify tires that need to be changed or repaired; Perform tire P.M. checks; Replace tire and wheel assemblies; Mount/dismount and rotate tires; Perform tire/wheel checks/repairs per (TW298), • Vehicle Coupling System (PM): Lubricate fifth wheel plate and slider mechanism; Operate slider mechanism, • Utilize key functions of Shop Management System and electronic documentation available. Perform work in accordance with all federal/provincial and corporate compliance guidelines (i.e. safety, DOT). Use internal and external maintenance documents, • Performs other duties as assigned., • Ensure proper maintenance of all service, safety and environmental records required to meet and/or exceed corporate, federal, state, and local government mandated requirements., • Accountable for key maintenance measurements established by company policy, related to the inspection and performance of PMs, brakes, tires, wheels, including any maintenance items directly associated with the safety of the customer. Posted Date 1 week ago (8/20/2025 4:33 PM) Requisition ID 2025-186673 Location (Posting Location) : State/Province NC Location (Posting Location) : City CHARLOTTE Location (Posting Location) : Postal Code 28206 Category Technicians/Service Employees9 Employment Type Regular-Full time Travel Requirements Greater than 60% Position Code 1001311 Min Pay USD $31.00/Hr. Max Pay USD $34.50/Hr.

Position Description Torque by Ryder is immediately hiring a Permanent Full Time Experienced Mobile Diesel and Automotive Technician to support our Truck Fleet in Charlotte NC For More Info Call Jordon or Text "Charlotte NC" to 904-489-7273 Hear it from a Torque Mobile Mechanic Technician Here: • Technician Positions Pay Each Week, • Hourly Pay: $34.00 - $38.00 per hour based on experience, • Ability to earn additional monthly performance incentive, • Schedule: Flexible 40-hour work week (weekend premiums apply), • Fuel Card and Company Cell Phone provided, • For mobile technicians, work site service vehicle will be provided For More Info Call Jordon or Text "Charlotte NC" to 904-489-7273 At Ryder, we offer outstanding benefits: • Generous Paid Time Off, • Medical, Dental and Vision Insurance effective 30 days from hire date, • Life Insurance and Disability Insurance Options, • 401K Savings Plan with Ryder matching contributions, • Discount on purchase of Ryder Common Stock, • Employee Discounts on Automotive, Mobile plans, Travel and Hotels, • Accredited Tech School Tuition Reimbursement, • PPE & Uniforms provided at no cost, • Paid Job training and development Click Here to See All Ryder Careers: EEO/AA/Female/Minority/Disabled/Veteran Requirements • High school diploma or equivalent preferred, • Vocational or Technical Certification Post Secondary degree or Technical Certifications, preferred, • Basic tools, required, • Requires demonstrated aptitude and applied experience in mechanical repair of automotive gas or diesel engines including:, • Routine preventative maintenance, which should include oil changes, brake and tire work, • Diagnostics and repairs, including AC, electrical systems, • Advanced skilled level repairs to include some major engine repairs, diesel after treatment or automotive fuel injection repairs, • Four (4) years or more Relevant work experience, preferred, • NonCommercial Driver License CLASS E, preferred, • Valid Commercial Driver License (CDL) CLASS A, preferred, • Other State driver's license, as required, • Four (4) years or more experience with mechanical repairs and diagnostics on heavy duty and medium duty equipment, • Must have minimum tools required to perform their job duties as outlined in Ryder's Maintenance policy 2.02, • Able to take home assigned mobile service truck, as applicable, and secure vehicle and contents, • Must be able to drive Ryder vehicles, • Ability to:, • Understand and adhere to Company policies in all areas, • Complete repair orders with the Company established systems, • Create and maintain professional relationships within all levels of the organization (peers, work groups, customers, supervisors), • Work independently and as a member of a team, • Prioritize workload, • Proven hands-on mechanic, customer service, and account management skills, • Demonstrates customer service skills, • Strong verbal and written communication skills, • Flexibility to operate and self-driven to excel in a fast-paced environment, • Self-starter and self-sufficient approach, • Capable of multi-tasking, highly organized, with excellent time management skills, • Detailed oriented with excellent follow-up practices, • Entrepreneurial spirit, • Preventive Maintenance (PM230&PM298) within 90 Days, • Brakes-Air (BA220&BA298) within 90 Days, • Brake mechanics/inspectors FMCS 396.25, • Hydraulic Brake (BH220&BH298) where appropriate within 90 Days, • Tire & Wheel TW220 within 90 Days, • CF609 & A/C trained and qualified (AC220&AC298) within 180 Days, • HD electrical - DR208 within 90 Days, • Svc Island Support SBTIII trained (SBT220) and SBT Phase 2 within 180 Days, • Complete 2 of the OEM On-Line diagnostic tool software courses as required by location fleet mi. (predominant OEM of fleet mix), • This position requires for you to drive Ryder vehicles. In order to become a Ryder employee you must:, • Pass a Ryder Drug Test, • Pass a DOT physical, • Pass a Ryder road test Responsibilities • Decision making: Responsible for making decisions surrounding vehicle diagnostics and repair, • Performs vehicle maintenance and repair duties including: standard vehicle maintenance, preventive maintenance, complex repairs with minimal (if any) support, • Demonstrate the ability to access and use internal and external maintenance documents - Diagnoses and repairs complex mechanical and electronic problems with minimal (if any) support, utilizing diagnostic computers/software when applicable, • Performs remote triage to with RCRC and customers to determine best solution to assist roadside breakdowns, • Performs facility maintenance duties, • Interacts with customers/drivers to properly determine nature of complaint once assigned a task, • Instructs and advises other technicians regarding maintenance repair procedures and diagnostics, • Interact with non-contractual customers, exhibit account management skills to independently facilitate preventative maintenance, repair issue resolution, and discuss new repair estimates with customer. Coordinate work schedule as required by customers. Road test vehicles to identify cause of complaints for repairs, ensure quality of repair work performed, and deliver customer satisfaction., • Preventive maintenance (PM) and vehicle repairs responsibilities include but is not limited to:, • A/C & Heater: Operate the system and recognize if the system is cooling or not (PM related); Perform system checks such as power to compressor, visual inspection of condenser, belt tension, etc; Identify Freon and oil leaks, • Brakes-Air: Identify components of air brake system; Operate brakes and identify irregular noises, air leaks; Perform simple air system tests; Measure lining thickness; Adjust brakes; Perform air brake sections of P.M.; Measure drums, rotors, cam bushings Perform brake repairs per (BA298) once trained and qualified, • Brakes-Hydraulic: Road test for proper operation; Make visual inspections for leaks; Check park brake operation; Check fluid level; Measure lining thickness; Adjust service brakes; Perform brake repairs per (BH298) once trained and qualified; Adjust park brakes, • Cargo Handling/Transfer, Liftgates: Identify leaks; Operate lift gate; Identify make and model; Add fluid to bring to proper level; Make minor adjustments to lift platform and its controls; Identify basic malfunctions, • Charging Systems (electrical): Visually inspect batteries; Clean connections; Check condition of belts; Test batteries; Check alternator mounting and pulley; Replace and adjust belts; Perform basic charging system check, • Clutch: Lubricate throw-out bearing, linkage, shafts, and cables; Identify proper clutch operation; Identify proper clutch brake operation, • Cooling Systems: Check and adjust coolant levels; Visually inspect system for leaks; Make minor repairs such as hose replacements, fan shrouds, leaking fittings; Recognize permanent antifreezes and their requirements; Use refractometer; Use pressure tester; Flush and refill systems, • Cranking System (electrical): Inspect and test batteries; Visually inspect cables and cranking motor; Clean the battery cables, connections and starter; Replace batteries; Charge and check batteries; Replace or repair defective cables, • Lighting System and Electrical Accessories: Repair minor wiring problems; Replace bulbs, lenses and simple light assemblies; Repair minor lighting problems; Replace and adjust sealed beams; Install or replace accessories such as heated mirrors, fans, spotlights, • Drive Axles: Inspect housings for leaks; Change oil and filter, if required, and clean breathers, • Driveline: Lubricate drive line; Inspect components for wear or damage, • Gas Engines-All Engines: Check and adjust oil levels; Identify unusual noises, and oil leaks, • Fuel Systems: Replace and prime fuel filter; Check gas and diesel fuel system components such as fuel lines, pickup tubes, return lines, etc, for proper integrity and condition, • Preventive Maintenance: Proper lube techniques; Minimal tire inspection; Brake check/applied stroke; Battery check; Under vehicle check/loose components; Initial Fault code identification; All PMs (PM298) including C supplements to exclude overheads, engine brake overhauls, DPF servicing, clean doser injector, servicing ArvinMeritor unitized hubs, inspect Lece Neville alternator brushes, inspect modulator system for proper operation, inspect/adjust shift selector cable, pop test Isuzu injectors, • Steering and Non-driven Axles and Alignment: Lubricate grease fittings, check and adjust fluid levels; Check and adjust toe; Check all steering components for wear; Check and adjust trailer axle alignment; Adjust wheel bearings including replacement of wheel seal, • Suspension-Chassis and Cab: Identify makes and models; Identify normal operation; Identify and repair minor air leaks; Identify malfunctions of basic nature, broken springs, excessive wear on bushings, etc, • Tire and Wheel Maintenance: Perform air pressure checks; Check tread depth; Identify tires that need to be changed or repaired; Perform tire P.M. checks; Replace tire and wheel assemblies; Mount/dismount and rotate tires; Perform tire/wheel checks/repairs per (TW298), • Vehicle Coupling System (PM): Lubricate fifth wheel plate and slider mechanism; Operate slider mechanism, • Utilize key functions of Shop Management System and electronic documentation available. Perform work in accordance with all federal/provincial and corporate compliance guidelines (i.e. safety, DOT). Use internal and external maintenance documents, • Performs other duties as assigned., • Ensure proper maintenance of all service, safety and environmental records required to meet and/or exceed corporate, federal, state, and local government mandated requirements. Posted Date 3 hours ago (9/2/2025 5:10 PM) Requisition ID 2025-187388 Location (Posting Location) : State/Province NC Location (Posting Location) : City CHARLOTTE Location (Posting Location) : Postal Code 28201 Category Technicians/Service Employees9 Employment Type Regular-Full time Travel Requirements Greater than 60% Position Code 1001374 Min Pay USD $34.00/Hr. Max Pay USD $38.00/Hr.

Position Description Torque by Ryder is Immediately hiring a Permanent Full Time Experienced Mobile Diesel/Automotive Technician to support our Truck Fleet in Charlotte, NC For More Info Call Jenny or Text "Charlotte MS3" to 904-541-8573 Hear it from a Torque Mobile Mechanic Technician Here: • Technician Positions Pay Each Week, • Hourly Pay: $31.00 - $34.50 per hour based on experience, • Ability to earn additional monthly performance incentive, • Schedule: Flexible 40-hour work week (weekend premiums apply), • Fuel Card and Company Cell Phone provided, • For mobile technicians, work site service vehicle will be provided For More Info Call Jenny or Text "Charlotte MS3" to 904-541-8573 At Ryder, we offer outstanding benefits: • Generous Paid Time Off, • Medical, Dental and Vision Insurance effective 30 days from hire date, • Life Insurance and Disability Insurance Options, • 401K Savings Plan with Ryder matching contributions, • Discount on purchase of Ryder Common Stock, • Employee Discounts on Automotive, Mobile plans, Travel and Hotels, • Accredited Tech School Tuition Reimbursement, • PPE & Uniforms provided at no cost, • Paid Job training and development For More Info Call Jenny or Text "Charlotte MS3" to 904-541-8573 Click Here to See All Ryder Careers: EEO/AA/Female/Minority/Disabled/Veteran Requirements • High school diploma or equivalent preferred, • Vocational or Technical Certification Post Secondary degree or Technical Certifications, preferred, • Basic tools required, • Requires demonstrated aptitude and applied experience in mechanical repair of automotive gas or diesel engines including:, • Routine preventative maintenance, which should include oil changes, brake and tire work, • Diagnostics and repairs, including AC, electrical systems, • Advanced skilled level repairs to include some major engine repairs, diesel after treatment or automotive fuel injection repairs, • Three (3) years or more relevant work experience, preferred, • NonCommercial Driver License CLASS E, preferred, • Valid Commercial Driver License (CDL) CLASS A, preferred, • Other State driver's license, as required, • Two (2) years or more experience with mechanical repairs and diagnostics on heavy duty and medium duty equipment, • Able to take home assigned mobile service truck, as applicable, and secure vehicle and contents, • Must be able to drive Ryder vehicles, • Ability to:, • Understand and adhere to Company policies in all areas, • Complete repair orders with the Company established systems, • Create and maintain professional relationships within all levels of the organization (peers, work groups, customers, supervisors), • Work independently and as a member of a team, • Prioritize workload, • Proven hands-on mechanic, customer service, and account management skills, • Demonstrates customer service skills, • Strong relationship management skills, • Strong verbal and written communication skills, • Flexibility to operate and self-driven to excel in a fast-paced environment, • Self-starter and self-sufficient approach, • Capable of multi-tasking, highly organized, with excellent time management skills, • Detailed oriented with excellent follow-up practices, • Entrepreneurial spirit, • Preventive Maintenance (PM230&PM298) within 90 Days, • Brakes-Air (BA220&BA298) within 90 Days, • Brake mechanics/inspectors FMCS 396.25, • Hydraulic Brake (BH220&BH298) where appropriate within 90 Days, • Tire & Wheel TW220 within 90 Days, • CF609 & A/C trained and qualified (AC220&AC298) within 180 Days, • HD electrical - DR208 within 90 Days, • Svc Island Support SBTIII trained (SBT220) and SBT Phase 2 within 180 Days, • Complete 2 of the OEM On-Line diagnostic tool software courses as required by location fleet mi. (predominant OEM of fleet mix), • This position requires for you to drive Ryder vehicles. In order to become a Ryder employee you must:, • Pass a Ryder Drug Test, • Pass a DOT physical, • Pass a Ryder road test Responsibilities • Interact with customer, exhibit account management skills to independently facilitate preventative maintenance, repair issue resolution, and discuss new repair estimates with customer., • Coordinate work schedule as required by customers. Road test vehicles to identify cause of complaints for repairs, ensure quality of repair work performed, and deliver customer satisfaction., • Preventive maintenance (PM) and vehicle repairs responsibilities include but is not limited to:, • A/C & Heater: Operate the system and recognize if the system is cooling or not (PM related); Perform system checks such as power to compressor, visual inspection of condenser, belt tension, etc; Identify Freon and oil leaks, • Brakes-Air: Identify components of air brake system; Operate brakes and identify irregular noises, air leaks; Perform simple air system tests; Measure lining thickness; Adjust brakes; Perform air brake sections of P.M.; Measure drums, rotors, cam bushings Perform brake repairs per (BA298) once trained and qualified, • Brakes-Hydraulic: Road test for proper operation; Make visual inspections for leaks; Check park brake operation; Check fluid level; Measure lining thickness; Adjust service brakes; Perform brake repairs per (BH298) once trained and qualified; Adjust park brakes, • Cargo Handling/Transfer, Liftgates: Identify leaks; Operate lift gate; Identify make and model; Add fluid to bring to proper level; Make minor adjustments to lift platform and its controls; Identify basic malfunctions, • Charging Systems (electrical): Visually inspect batteries; Clean connections; Check condition of belts; Test batteries; Check alternator mounting and pulley; Replace and adjust belts; Perform basic charging system check, • Clutch: Lubricate throw-out bearing, linkage, shafts, and cables; Identify proper clutch operation; Identify proper clutch brake operation, • Cooling Systems: Check and adjust coolant levels; Visually inspect system for leaks; Make minor repairs such as hose replacements, fan shrouds, leaking fittings; Recognize permanent antifreezes and their requirements; Use refractometer; Use pressure tester; Flush and refill systems, • Cranking System (electrical): Inspect and test batteries; Visually inspect cables and cranking motor; Clean the battery cables, connections and starter; Replace batteries; Charge and check batteries; Replace or repair defective cables, • Lighting System and Electrical Accessories: Repair minor wiring problems; Replace bulbs, lenses and simple light assemblies; Repair minor lighting problems; Replace and adjust sealed beams; Install or replace accessories such as heated mirrors, fans, spotlights, • Drive Axles: Inspect housings for leaks; Change oil and filter, if required, and clean breathers, • Driveline: Lubricate drive line; Inspect components for wear or damage, • Gas Engines-All Engines: Check and adjust oil levels; Identify unusual noises, and oil leaks, • Fuel Systems: Replace and prime fuel filter; Check gas and diesel fuel system components such as fuel lines, pickup tubes, return lines, etc, for proper integrity and condition, • Preventive Maintenance: Proper lube techniques; Minimal tire inspection; Brake check/applied stroke; Battery check; Under vehicle check/loose components; Initial Fault code identification; All PMs (PM298) including C supplements to exclude overheads, engine brake overhauls, DPF servicing, clean doser injector, servicing ArvinMeritor unitized hubs, inspect Lece Neville alternator brushes, inspect modulator system for proper operation, inspect/adjust shift selector cable, pop test Isuzu injectors, • Steering and Non-driven Axles and Alignment: Lubricate grease fittings, check and adjust fluid levels; Check and adjust toe; Check all steering components for wear; Check and adjust trailer axle alignment; Adjust wheel bearings including replacement of wheel seal, • Suspension-Chassis and Cab: Identify makes and models; Identify normal operation; Identify and repair minor air leaks; Identify malfunctions of basic nature, broken springs, excessive wear on bushings, etc, • Tire and Wheel Maintenance: Perform air pressure checks; Check tread depth; Identify tires that need to be changed or repaired; Perform tire P.M. checks; Replace tire and wheel assemblies; Mount/dismount and rotate tires; Perform tire/wheel checks/repairs per (TW298), • Vehicle Coupling System (PM): Lubricate fifth wheel plate and slider mechanism; Operate slider mechanism, • Utilize key functions of Shop Management System and electronic documentation available. Perform work in accordance with all federal/provincial and corporate compliance guidelines (i.e. safety, DOT). Use internal and external maintenance documents, • Performs other duties as assigned., • Ensure proper maintenance of all service, safety and environmental records required to meet and/or exceed corporate, federal, state, and local government mandated requirements., • Accountable for key maintenance measurements established by company policy, related to the inspection and performance of PMs, brakes, tires, wheels, including any maintenance items directly associated with the safety of the customer. Posted Date 1 week ago (8/22/2025 5:17 PM) Requisition ID 2025-186856 Location (Posting Location) : State/Province NC Location (Posting Location) : City CHARLOTTE Location (Posting Location) : Postal Code 28201 Category Technicians/Service Employees9 Employment Type Regular-Full time Travel Requirements Greater than 60% Position Code 1001311 Min Pay USD $31.00/Hr. Max Pay USD $34.50/Hr.

Innova Solutions has a client that is immediately hiring for a QA Tester - ALM/Octane Job title: QA Tester - ALM/Octane Position type: Full-time/Contract Duration: 18 Months Location: Charlotte, NC (Hybrid) As a QA Tester, you will: Coordinate ingestion from lines of business and work with third-party vendors for script completion. Confirm metadata integrity (e.g., document site, signature indicator) and coordinate with business partners. Determine and locate defects. Create and execute test plans and scripts. Raise identified defects. The ideal candidate will have:Experience with JIRA. Experience with Colfax. Experience with ALM or Octane for documenting scripts. Ability to create, execute, and raise defects from test scripts. Qualified candidates should APPLY NOW for immediate consideration! Please hit APPLY to provide the required information, and we will be back in touch as soon as possible. We are currently interviewing to fill this and other similar positions. If this role is not a fit for you, we do offer a referral bonus program for referrals that we successfully place with our clients, subject to program guidelines. ASK ME HOW. Thank you! Amanpreet Singh Associate – Recruitment PAY RANGE AND BENEFITS: Pay Range*: $30.00 - $35.00 per hour *Pay range offered to a successful candidate will be based on several factors, including the candidate's education, work experience, work location, specific job duties, certifications, etc. Benefits: Innova Solutions offers benefits( based on eligibility) that include the following: Medical & pharmacy coverage, Dental/vision insurance, 401(k), Health saving account (HSA) and Flexible spending account (FSA), Life Insurance, Pet Insurance, Short term and Long term Disability, Accident & Critical illness coverage, Pre-paid legal & ID theft protection, Sick time, and other types of paid leaves (as required by law), Employee Assistance Program (EAP). ABOUT INNOVA SOLUTIONS: Founded in 1998 and headquartered in Atlanta, Georgia, Innova Solutions employs approximately 50,000 professionals worldwide and reports an annual revenue approaching $3 Billion. Through our global delivery centers across North America, Asia, and Europe, we deliver strategic technology and business transformation solutions to our clients, enabling them to operate as leaders within their fields. Recent Recognitions: Named One of America’s Best Employers for New Grads by Forbes (2024) Named One of the Best Companies to Work for by U.S. News & World Report (Private Companies List, 2024-2025) One of the Largest IT Staffing Firms in the US – Ranked #3 by Staffing Industry Analysts (SIA, 2024) One of the Largest Staffing Firms in the US – Ranked #13 by Staffing Industry Analysts (SIA, 2024; includes Innova Solutions, Volt, & HireGenics) Named One of the Top Ten Private Companies in Atlanta by the Atlanta Business Chronicle (2023) One of the Largest Certified Minority Business Enterprises (MBEs) in the United States (NMSDC, 2024) AWS Advanced Tier Services Partner with 100+ certifications Website: Innova Solutions offers a referral bonus for qualified Ambassadors who refer eligible referrals. Submit referrals at and earn $250-$1,000 per referral. Innova Solutions is an Equal Opportunity Employer and prohibits any kind of unlawful discrimination and harassment. Innova Solutions is committed to the principle of equal employment opportunity for all employees and to providing employees with a work environment free of discrimination and harassment on the basis of race, color, religion or belief, national origin, citizenship, social or ethnic origin, sex, age, physical or mental disability, veteran status, marital status, domestic partner status, sexual orientation, or any other status protected by the statutes, rules, and regulations in the locations where it operates. If you are an individual with a disability and need a reasonable accommodation to assist with your job search or application for employment, please contact us at or (770) 493-5588. Please indicate the specifics of the assistance needed. Innova Solutions encourages all interested and qualified candidates to apply for employment opportunities. Innova Solutions (HireGenics/Volt) does not discriminate against applicants based on citizenship status, immigration status, or national origin, in accordance with 8 U.S.C. § 1324b. The company will consider for employment qualified applicants with arrest and conviction records in a manner that complies with the San Francisco Fair Chance Ordinance, the Los Angeles Fair Chance Initiative for Hiring Ordinance, and other applicable laws.

A client of Innova Solutions is immediately hiring for a Position: Performance Lead Location: Charlotte, NC (3 Days/week Onsite) Duration: Long Term Contract Details: This position is responsible for key performance-related tasks for new lines of business in Markets Independently managing tasks (LRE scripting, test strategy planning, testing, monitoring, profiling, reporting) from project initiation to completion. Leading performance defect triage meetings and driving solutions. Coordinating with team members and external stakeholders for root cause analysis of issues and performance bottlenecks. Possessing in-depth knowledge of specific technologies within the line of business (LOB) domain. Demonstrating expert-level communication skills. Performance Tester/Engineer/Architect with a minimum of 7+ years of hands-on experience in LoadRunner is mandatory Key Requirements: Proficient in using VUGen 12 or later for advanced test script development beyond basic record and playback functionality. Skilled in developing scripts using HTTP/HTML, MQ, Java, and TruClient protocols (Mandatory). Capable of understanding complex workflows and designing test flows and strategies. Designing test strategy , load scenarios, test plan Execute load tests to meet the target requirements Monitor System and Application Metrics to analyze and identify bottlenecks Exhibits triage ownership / leadership ability (ability to own issue resolution, direct triage, drive participation and discussion, execute crisp and effective communications, strong organizational skills) Strong knowledge of Splunk for enhanced load test analysis. Solid understanding of software development and architecture concepts (.NET, Java/JEE, code review, code analysis, architectural/enterprise integration patterns, 3-tier architecture) Expertise in identifying performance bottlenecks and understanding end-to-end web performance metrics. Strong analytical skills with the ability to research and resolve complex system, application, and user issues. Experience with monitoring and profiling tools such as Dynatrace, Splunk, and AWR reports to monitor, gather, and report application performance on Windows or Linux systems. Excellent verbal and written communication skills. Flexibility to work hours supporting APAC and EMEA teams. Banking Experience is compulsory The ideal candidate will have: Qualified candidates should APPLY NOW for immediate consideration! Please hit APPLY to provide the required information, and we will be back in touch as soon as possible. We are currently interviewing to fill this and other similar positions. If this role is not a fit for you, we do offer a referral bonus program for referrals that we successfully place with our clients, subject to program guidelines. ASK ME HOW. Thank you! Prashant Saurav Sr. Associate (+1) 646-442-0534 PAY RANGE AND BENEFITS: Pay Range*: OR *Pay range offered to a successful candidate will be based on several factors, including the candidate's education, work experience, work location, specific job duties, certifications, etc. Benefits: Innova Solutions offers benefits( based on eligibility) that include the following: Medical & pharmacy coverage, Dental/vision insurance, 401(k), Health saving account (HSA) and Flexible spending account (FSA), Life Insurance, Pet Insurance, Short term and Long term Disability, Accident & Critical illness coverage, Pre-paid legal & ID theft protection, Sick time, and other types of paid leaves (as required by law), Employee Assistance Program (EAP). ABOUT INNOVA SOLUTIONS: Founded in 1998 and headquartered in Atlanta, Georgia, Innova Solutions employs approximately 50,000 professionals worldwide and reports an annual revenue approaching $3 Billion. Through our global delivery centers across North America, Asia, and Europe, we deliver strategic technology and business transformation solutions to our clients, enabling them to operate as leaders within their fields. Recent Recognitions: Named One of America’s Best Employers for New Grads by Forbes (2024 Named One of the Best Companies to Work for by U.S. News & World Report (Private Companies List, 2024-2025) One of the Largest IT Staffing Firms in the US – Ranked #3 by Staffing Industry Analysts (SIA, 2024) One of the Largest Staffing Firms in the US – Ranked #13 by Staffing Industry Analysts (SIA, 2024; includes Innova Solutions, Volt, & HireGenics) Named One of the Top Ten Private Companies in Atlanta by the Atlanta Business Chronicle (2023) One of the Largest Certified Minority Business Enterprises (MBEs) in the United States (NMSDC, 2024) AWS Advanced Tier Services Partner with 100+ certifications Website: Innova Solutions offers a referral bonus for qualified Ambassadors who refer eligible referrals. Submit referrals at and earn $250-$1,000 per referral. Innova Solutions is an Equal Opportunity Employer and prohibits any kind of unlawful discrimination and harassment. Innova Solutions is committed to the principle of equal employment opportunity for all employees and to providing employees with a work environment free of discrimination and harassment on the basis of race, color, religion or belief, national origin, citizenship, social or ethnic origin, sex, age, physical or mental disability, veteran status, marital status, domestic partner status, sexual orientation, or any other status protected by the statutes, rules, and regulations in the locations where it operates. If you are an individual with a disability and need a reasonable accommodation to assist with your job search or application for employment, please contact us at or (770) 493-5588. Please indicate the specifics of the assistance needed. Innova Solutions encourages all interested and qualified candidates to apply for employment opportunities. Innova Solutions (HireGenics/Volt) does not discriminate against applicants based on citizenship status, immigration status, or national origin, in accordance with 8 U.S.C. § 1324b. The company will consider for employment qualified applicants with arrest and conviction records in a manner that complies with the San Francisco Fair Chance Ordinance, the Los Angeles Fair Chance Initiative for Hiring Ordinance, and other applicable laws.

Job Description Who we are! At 4Ci our mission is to build long term relationships, based on trust, integrity, and knowledge with all our employees and business affiliates. 4Ci has been in business for 20 years and has employees working on mission critical projects nationwide. We provide computer programming, testing, and system design services to develop and maintain multi-year, multi-million-dollar mission critical applications for the US Government. Examples of such applications are Medicaid MMIS systems, Health Insurance Exchange, Child Support, Food Stamps, Unemployment Insurance. We hire people that have desire, aptitude, and attitude to work with our clients such as big 3 consulting firms and US State Government and others. While employed with us you get hands on experience with very large-scale mission critical applications that use latest in technology trends and software tools. We invest in training our resources and retool their expertise to meet our project needs. More importantly our employees have a well-defined social and business purpose to help our clients deliver social and welfare benefits to millions of needs families by use of technology and knowledge. What we do We partner with big 3 consulting firms to design, develop, and maintain complex, heterogeneous, and client facing web-based automation systems that deliver social and welfare benefits to millions of families, nationwide. To develop such highly complex web applications we need professionals with broad range of experience and skills ranging from subject matter experts, computer programmers, project managers, tester, systems analysts and others. We invest in training our employees and retool their expertise to meet our project needs. Title: Sr Java Developer Location: Charlotte, NC Duration: 12 Months Responsibilities: • · Experience with Open System development skills such as Java, JEE, JSP, Spring, Spring Boot, Spring JPA, REST, JSON, Junit, JavaScript, HTML, and XML are required., • · Strong experience with API development including experience with Rest, • · Experience with API gateways and patterns, • · Working Knowledge with Micro Service Architecture, • · Working Knowledge with application development on MuleSoft, Azure cloud and Kubernetes Qualifications: Bachelor’s degree or foreign equivalent in Computer Engineering, or Computer Science and Engineering or STEM related courses.40 hours per week. M-F. Must be authorized to work in the United States. Email resumes to or mail to Attn: HR, 4Consulting, Inc. 6850 TPC Drive Suite 208 McKinney, TX 75070. Disclaimer 4 Consulting Inc. offers a comprehensive compensation and benefits package. 4Ci is an affirmative action-equal opportunity employer. 4Ci complies with all applicable federal, state and local laws regarding recruitment and hiring. All qualified candidates are considered for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability, protected veteran status, or any other category protected by applicable federal, state or local laws. Company DescriptionAt 4Ci our mission is to build long term relationships, based on trust and integrity, with all our employees and business affiliates. We partner with world’s largest corporations to design, develop, and maintain complex, heterogenous, and client facing web-based automation systems that deliver social and welfare benefits to millions of families.At 4Ci our mission is to build long term relationships, based on trust and integrity, with all our employees and business affiliates. We partner with world’s largest corporations to design, develop, and maintain complex, heterogenous, and client facing web-based automation systems that deliver social and welfare benefits to millions of families.

Job Description About Westman Atelier A new standard of clean luxury. Founded by world-renowned editorial makeup artist Gucci Westman, Westman Atelier is a curated edit of skin-loving, performance-first makeup that is always effortless, never overdone. A mother, makeup artist, and champion of holistic living, Gucci believes passionately that ‘luxury’, ‘efficacy’ and ‘clean’ can be synonymous with exceptional makeup. • A skincare approach to high performance make-up formulated with clean ingredients and no-compromise integrity Gucci Westman has more than 20 years of professional experience as a major editorial makeup artist, contributing to publications like Vogue and Harper’s Bazaar. Gucci is known for creating dewy, supernaturally glowy looks and her highly coveted “second-skin approach” to makeup, resulting in naturally beautiful, radiantly amplified skin. Position Summary Westman Atelier is seeking an energetic Makeup Artist with a passion for clean, luxury beauty to represent the brand in-store while providing the highest level of customer experience. This position will be responsible for developing and maintaining customer loyalty through exceptional customer experience, product education, and clienteling. The ideal candidate is a self-starter with an entrepreneurial spirit, drive for excellence, and a true ambassador for Westman Atelier. Responsibilities: • Achieve daily sales goals through in-store service and supporting at vendor events, • Provide exceptional customer experience with makeup services; showcase excellent makeup skills, fitting with the unique Westman Atelier product application, • Educate customers on brand product knowledge to create brand awareness, and assist them with product selection through demonstration and application, • Actively participate in and complete online learning - Grooming & Procedures, • Adhere to proper hygiene guidelines when demonstrating products on clients, • Assist with maintaining the required inventory practices while in-store, • Maintain excellent VM standards and regularly clean + restock the counter/gondolas, tools, and tester units, • Adhere to brand and retailer image guidelines, standards, and practices at all times, • Regularly and effectively communicate with leadership to keep them informed and updated on all actions/events., • 1-2 years of beauty/skin care sales experience; Makeup Artistry degree or certification in similar capacity, a plus, • Familiarity with beauty retail environments; Sephora experience, preferred, • Demonstrated success handling customer matters in a fast-paced environment, • Ability to travel to various retailers within region, • Ability to work a flexible schedule based on business needs, including nights, weekends and special events, • A high level of ownership, accountability, and initiative, • Exceptional organizational skills and attention to detail 5dB8jTLmpc

Remote working/work at home options are available for this role. Set your own schedule – work anytime, from anywhere. Ideal for side-income seekers, students, or remote workers.

Location: Remote (USA) Company: ProductReviewJobs Thank you for your interest in becoming a Paid Product Tester.

Job ID: 169913 Position: Senior UAT Tester Location: Charlotte, NC (1525 W W T Harris Blvd – CIC) Work Arrangement: Hybrid (3 days in-office; Tuesdays mandatory onsite) Pay Range: $55–$65/hr (W2) About the Role We are seeking a Senior UAT Tester for a contingent resource assignment to support large-scale initiatives within Technology Business Services Consulting. The ideal candidate will bring strong UAT testing expertise combined with project management and product ownership experience. This role requires someone who can coordinate end-to-end testing efforts, facilitate planning sessions, create detailed project documentation, and collaborate strategically with stakeholders across the enterprise. Key Responsibilities * Lead UAT coordination including test planning, execution, and reporting. * Support large-scale projects by reviewing and analyzing complex business service challenges. * Develop project plans, schedules, and executive-level presentations. * Write user stories, acceptance criteria, and create automation test scripts. * Collaborate with Product Owners, Project Managers, Business Analysts, and stakeholders to ensure alignment across teams. * Facilitate meetings, workshops, and working sessions (virtual & in-person). * Track timelines and deliverables across multiple projects including integration testing and production validation. * Ensure compliance with Software Development Life Cycle (SDLC) principles and Agile methodologies. Required Qualifications * 5+ years of IT experience in support of Business Services (work, consulting, training, military, or education). * 5+ years as a Product Owner / Project Manager / Business Analyst in an Agile Scrum team environment. * Strong background in UAT testing and test coordination. * Experience with Agile project methodologies and tools (JIRA, QC/ALM, Confluence). * Ability to create detailed project plans, schedules, and presentations. * Hands-on experience with automation test scripts and execution. * Knowledge of APIs and system integration concepts. * Excellent communication skills with the ability to engage stakeholders from mid to senior management. * Strong organizational skills with the ability to manage multiple initiatives simultaneously. Preferred Skills * Experience as a Program, Project, or Change Manager on complex projects. * Knowledge of automation frameworks and tools. * Experience with ALM is a plus. * Background in Cornerstone projects (desired but not required). Pay Range: $55 - $65 The specific compensation for this position will be determined by a number of factors, including the scope, complexity and location of the role as well as the cost of labor in the market; the skills, education, training, credentials and experience of the candidate; and other conditions of employment. Our full-time consultants have access to benefits including medical, dental, vision and 401K contributions as well as any other PTO, sick leave, and other benefits mandated by appliable state or localities where you reside or work. If you receive a suspicious message, email, or phone call claiming to be from PTR Global do not respond or click on any links. Instead, contact us directly at +1 214-740-2424. To report any concerns, please email us at

Ability to work both independently as well as lead a team of technical testers on penetration testing and red team engagements. Cyber SDC - WAM Penetration Tester - Senior - Location OPEN. Title: Cybersecurity – Attack and Penetration Tester.

We are seeking an experienced ETL/Datawarehouse Tester with a proven track record in quality assurance testing using SQL, database, and ETL technologies. Proven experience as a Quality Assurance Tester using SQL, Database, ETL technologies. Job Title: ETL/Datawarehouse Tester Job Description.

In-Home Usage Testers are considered independent contractors, we pay weekly every Wednesday by direct deposit or by cheque. A paid Product Tester position is perfect for those looking for an entry-level opportunity, flexible or seasonal work, temporary work or part-time work. Product Testers are wan

Product Testers are wanted to work from home nationwide in the US to fulfill upcoming contracts with national and international companies. There is no payment required in order to apply or to work as an In-Home Usage Tester. In-Home Usage Testers are considered independent contractors, we pay weekly

Product Testers are wanted to work from home nationwide in the US to fulfill upcoming contracts with national and international companies. There is no payment required in order to apply or to work as an In-Home Usage Tester. In-Home Usage Testers are considered independent contractors, we pay weekly

Outstanding long-term contract opportunity! A well-known Financial Services Company is looking for a SWIFT ISO 20022 Manual Testers in Charlotte NC.

Product Testers are wanted to work from home nationwide in the US to fulfill upcoming contracts with national and international companies. There is no payment required in order to apply or to work as an In-Home Usage Tester. In-Home Usage Testers are considered independent contractors, we pay weekly

There is no payment required in order to apply or to work as an In-Home Usage Tester. In-Home Usage Testers are considered independent contractors, we pay weekly every Wednesday by direct deposit or by cheque. A paid Product Tester position is perfect for those looking for an entry-level opportunity

We’re looking for Data Entry Specialists for Customer Products across the US to work from home and help top brands improve their products before they hit the market.

We're on the hunt for curious, motivated individuals to test and review online money-making opportunities featured on FinanceBuzz.If you enjoy discovering new platforms and sharing your experience, this flexible gig could be perfect for you.Qualifications, skills, and all relevant experience needed

We're on the hunt for curious, motivated individuals to test and review online money-making opportunities featured on FinanceBuzz.If you enjoy discovering new platforms and sharing your experience, this flexible gig could be perfect for you.Qualifications, skills, and all relevant experience needed

In-Home Usage Testers are considered independent contractors, we pay weekly every Wednesday by direct deposit or by cheque. A paid Product Tester position is perfect for those looking for an entry-level opportunity, flexible or seasonal work, temporary work or part-time work. Product Testers are wan

We're on the hunt for curious, motivated individuals to test and review online money-making opportunities featured on FinanceBuzz.If you enjoy discovering new platforms and sharing your experience, this flexible gig could be perfect for you.Qualifications, skills, and all relevant experience needed

Product Testers are wanted to work from home nationwide in the US to fulfill upcoming contracts with national and international companies. There is no payment required in order to apply or to work as an In-Home Usage Tester. In-Home Usage Testers are considered independent contractors, we pay weekly

Product Testers are wanted to work from home nationwide in the US to fulfill upcoming contracts with national and international companies. There is no payment required in order to apply or to work as an In-Home Usage Tester. In-Home Usage Testers are considered independent contractors, we pay weekly