Trabajos tester en Philadelphia, PennsylvaniaCrear alertas

Position Description Torque by Ryder is immediately hiring a Permanent Full Time Experienced Mobile Auto and Diesel Technician to support our Truck Fleet in Philadelphia, PA For More Info Call Jordon or text "Philadelphia" to 904-489-7273 Hear it from a Torque Mobile Mechanic Technician Here: • Technician Positions Pay Each Week, • Hourly Pay: $41.00 per hour, • Ability to earn additional monthly performance incentive, • Schedule: Flexible 40-hour work week (weekend premiums apply), • Fuel Card and Company Cell Phone provided, • For mobile technicians, work site service vehicle will be provided We want the right Maintenance Repair Mechanic Technician to join us at Ryder manage our fleet of Heavy Duty Trucks. For More Info Call Jordon or text "Philadelphia" to 904-489-7273 At Ryder, we offer outstanding benefits: • Generous Paid Time Off, • Medical, Dental and Vision Insurance effective 30 days from hire date, • Life Insurance and Disability Insurance Options, • 401K Savings Plan with Ryder matching contributions, • Discount on purchase of Ryder Common Stock, • Employee Discounts on Automotive, Mobile plans, Travel and Hotels, • Accredited Tech School Tuition Reimbursement, • PPE & Uniforms provided at no cost, • Paid Job training and development Click Here to See All Ryder Careers: EEO/AA/Female/Minority/Disabled/Veteran Requirements • High school diploma or equivalent preferred, • Vocational or Technical Certification Post Secondary degree or Technical Certifications, preferred, • Basic tools required, • Requires demonstrated aptitude and applied experience in mechanical repair of automotive gas or diesel engines including:, • Routine preventative maintenance, which should include oil changes, brake and tire work, • Diagnostics and repairs, including AC, electrical systems, • Advanced skilled level repairs to include some major engine repairs, diesel after treatment or automotive fuel injection repairs, • Three (3) years or more relevant work experience, preferred, • NonCommercial Driver License CLASS E, preferred, • Valid Commercial Driver License (CDL) CLASS A, preferred, • Other State driver's license, as required, • Two (2) years or more experience with mechanical repairs and diagnostics on heavy duty and medium duty equipment, • Able to take home assigned mobile service truck, as applicable, and secure vehicle and contents, • Must be able to drive Ryder vehicles, • Ability to:, • Understand and adhere to Company policies in all areas, • Complete repair orders with the Company established systems, • Create and maintain professional relationships within all levels of the organization (peers, work groups, customers, supervisors), • Work independently and as a member of a team, • Prioritize workload, • Proven hands-on mechanic, customer service, and account management skills, • Demonstrates customer service skills, • Strong relationship management skills, • Strong verbal and written communication skills, • Flexibility to operate and self-driven to excel in a fast-paced environment, • Self-starter and self-sufficient approach, • Capable of multi-tasking, highly organized, with excellent time management skills, • Detailed oriented with excellent follow-up practices, • Entrepreneurial spirit, • Preventive Maintenance (PM230&PM298) within 90 Days, • Brakes-Air (BA220&BA298) within 90 Days, • Brake mechanics/inspectors FMCS 396.25, • Hydraulic Brake (BH220&BH298) where appropriate within 90 Days, • Tire & Wheel TW220 within 90 Days, • CF609 & A/C trained and qualified (AC220&AC298) within 180 Days, • HD electrical - DR208 within 90 Days, • Svc Island Support SBTIII trained (SBT220) and SBT Phase 2 within 180 Days, • Complete 2 of the OEM On-Line diagnostic tool software courses as required by location fleet mi. (predominant OEM of fleet mix), • This position requires for you to drive Ryder vehicles. In order to become a Ryder employee you must:, • Pass a Ryder Drug Test, • Pass a DOT physical, • Pass a Ryder road test Responsibilities • Interact with customer, exhibit account management skills to independently facilitate preventative maintenance, repair issue resolution, and discuss new repair estimates with customer., • Coordinate work schedule as required by customers. Road test vehicles to identify cause of complaints for repairs, ensure quality of repair work performed, and deliver customer satisfaction., • Preventive maintenance (PM) and vehicle repairs responsibilities include but is not limited to:, • A/C & Heater: Operate the system and recognize if the system is cooling or not (PM related); Perform system checks such as power to compressor, visual inspection of condenser, belt tension, etc; Identify Freon and oil leaks, • Brakes-Air: Identify components of air brake system; Operate brakes and identify irregular noises, air leaks; Perform simple air system tests; Measure lining thickness; Adjust brakes; Perform air brake sections of P.M.; Measure drums, rotors, cam bushings Perform brake repairs per (BA298) once trained and qualified, • Brakes-Hydraulic: Road test for proper operation; Make visual inspections for leaks; Check park brake operation; Check fluid level; Measure lining thickness; Adjust service brakes; Perform brake repairs per (BH298) once trained and qualified; Adjust park brakes, • Cargo Handling/Transfer, Liftgates: Identify leaks; Operate lift gate; Identify make and model; Add fluid to bring to proper level; Make minor adjustments to lift platform and its controls; Identify basic malfunctions, • Charging Systems (electrical): Visually inspect batteries; Clean connections; Check condition of belts; Test batteries; Check alternator mounting and pulley; Replace and adjust belts; Perform basic charging system check, • Clutch: Lubricate throw-out bearing, linkage, shafts, and cables; Identify proper clutch operation; Identify proper clutch brake operation, • Cooling Systems: Check and adjust coolant levels; Visually inspect system for leaks; Make minor repairs such as hose replacements, fan shrouds, leaking fittings; Recognize permanent antifreezes and their requirements; Use refractometer; Use pressure tester; Flush and refill systems, • Cranking System (electrical): Inspect and test batteries; Visually inspect cables and cranking motor; Clean the battery cables, connections and starter; Replace batteries; Charge and check batteries; Replace or repair defective cables, • Lighting System and Electrical Accessories: Repair minor wiring problems; Replace bulbs, lenses and simple light assemblies; Repair minor lighting problems; Replace and adjust sealed beams; Install or replace accessories such as heated mirrors, fans, spotlights, • Drive Axles: Inspect housings for leaks; Change oil and filter, if required, and clean breathers, • Driveline: Lubricate drive line; Inspect components for wear or damage, • Gas Engines-All Engines: Check and adjust oil levels; Identify unusual noises, and oil leaks, • Fuel Systems: Replace and prime fuel filter; Check gas and diesel fuel system components such as fuel lines, pickup tubes, return lines, etc, for proper integrity and condition, • Preventive Maintenance: Proper lube techniques; Minimal tire inspection; Brake check/applied stroke; Battery check; Under vehicle check/loose components; Initial Fault code identification; All PMs (PM298) including C supplements to exclude overheads, engine brake overhauls, DPF servicing, clean doser injector, servicing ArvinMeritor unitized hubs, inspect Lece Neville alternator brushes, inspect modulator system for proper operation, inspect/adjust shift selector cable, pop test Isuzu injectors, • Steering and Non-driven Axles and Alignment: Lubricate grease fittings, check and adjust fluid levels; Check and adjust toe; Check all steering components for wear; Check and adjust trailer axle alignment; Adjust wheel bearings including replacement of wheel seal, • Suspension-Chassis and Cab: Identify makes and models; Identify normal operation; Identify and repair minor air leaks; Identify malfunctions of basic nature, broken springs, excessive wear on bushings, etc, • Tire and Wheel Maintenance: Perform air pressure checks; Check tread depth; Identify tires that need to be changed or repaired; Perform tire P.M. checks; Replace tire and wheel assemblies; Mount/dismount and rotate tires; Perform tire/wheel checks/repairs per (TW298), • Vehicle Coupling System (PM): Lubricate fifth wheel plate and slider mechanism; Operate slider mechanism, • Utilize key functions of Shop Management System and electronic documentation available. Perform work in accordance with all federal/provincial and corporate compliance guidelines (i.e. safety, DOT). Use internal and external maintenance documents, • Performs other duties as assigned., • Ensure proper maintenance of all service, safety and environmental records required to meet and/or exceed corporate, federal, state, and local government mandated requirements., • Accountable for key maintenance measurements established by company policy, related to the inspection and performance of PMs, brakes, tires, wheels, including any maintenance items directly associated with the safety of the customer. Posted Date 1 month ago (10/29/2025 3:14 PM) Requisition ID 2025-190625 Location (Posting Location) : State/Province PA Location (Posting Location) : City Philadelphia Location (Posting Location) : Postal Code 19114 Category Technicians/Service Employees9 Employment Type Regular-Full time Travel Requirements Greater than 60% Position Code 1001311 Min Pay USD $41.00/Hr. Max Pay USD $41.00/Hr.

Position Description Torque by Ryder is immediately hiring a Permanent Full Time Experienced Mobile Diesel and Auto Technician to support our Truck Fleet in Philadelphia, PA For More Info Call Jenny or Text "Philly MS3" to 904-541-8573 Hear it from a Torque Mobile Mechanic Technician Here: • Technician Positions Pay Each Week, • Hourly Pay: $41.00 per hour, • Ability to earn additional monthly performance incentive, • Schedule: Flexible 40-hour work week (weekend premiums apply) Tuesday-Saturday, • Fuel Card and Company Cell Phone provided, • For mobile technicians, work site service vehicle will be provided We want the right Maintenance Repair Mechanic Technician to join us at Ryder manage our fleet of Heavy Duty Trucks. At Ryder, we offer outstanding benefits: • Generous Paid Time Off, • Medical, Dental and Vision Insurance effective 30 days from hire date, • Life Insurance and Disability Insurance Options, • 401K Savings Plan with Ryder matching contributions, • Discount on purchase of Ryder Common Stock, • Employee Discounts on Automotive, Mobile plans, Travel and Hotels, • Accredited Tech School Tuition Reimbursement, • PPE & Uniforms provided at no cost, • Paid Job training and development Click Here to See All Ryder Careers: EEO/AA/Female/Minority/Disabled/Veteran Requirements • High school diploma or equivalent preferred, • Vocational or Technical Certification Post Secondary degree or Technical Certifications, preferred, • Basic tools required, • Requires demonstrated aptitude and applied experience in mechanical repair of automotive gas or diesel engines including:, • Routine preventative maintenance, which should include oil changes, brake and tire work, • Diagnostics and repairs, including AC, electrical systems, • Advanced skilled level repairs to include some major engine repairs, diesel after treatment or automotive fuel injection repairs, • Three (3) years or more relevant work experience, preferred, • NonCommercial Driver License CLASS E, preferred, • Valid Commercial Driver License (CDL) CLASS A, preferred, • Other State driver's license, as required, • Two (2) years or more experience with mechanical repairs and diagnostics on heavy duty and medium duty equipment, • Able to take home assigned mobile service truck, as applicable, and secure vehicle and contents, • Must be able to drive Ryder vehicles, • Ability to:, • Understand and adhere to Company policies in all areas, • Complete repair orders with the Company established systems, • Create and maintain professional relationships within all levels of the organization (peers, work groups, customers, supervisors), • Work independently and as a member of a team, • Prioritize workload, • Proven hands-on mechanic, customer service, and account management skills, • Demonstrates customer service skills, • Strong relationship management skills, • Strong verbal and written communication skills, • Flexibility to operate and self-driven to excel in a fast-paced environment, • Self-starter and self-sufficient approach, • Capable of multi-tasking, highly organized, with excellent time management skills, • Detailed oriented with excellent follow-up practices, • Entrepreneurial spirit, • Preventive Maintenance (PM230&PM298) within 90 Days, • Brakes-Air (BA220&BA298) within 90 Days, • Brake mechanics/inspectors FMCS 396.25, • Hydraulic Brake (BH220&BH298) where appropriate within 90 Days, • Tire & Wheel TW220 within 90 Days, • CF609 & A/C trained and qualified (AC220&AC298) within 180 Days, • HD electrical - DR208 within 90 Days, • Svc Island Support SBTIII trained (SBT220) and SBT Phase 2 within 180 Days, • Complete 2 of the OEM On-Line diagnostic tool software courses as required by location fleet mi. (predominant OEM of fleet mix), • This position requires for you to drive Ryder vehicles. In order to become a Ryder employee you must:, • Pass a Ryder Drug Test, • Pass a DOT physical, • Pass a Ryder road test Responsibilities • Interact with customer, exhibit account management skills to independently facilitate preventative maintenance, repair issue resolution, and discuss new repair estimates with customer., • Coordinate work schedule as required by customers. Road test vehicles to identify cause of complaints for repairs, ensure quality of repair work performed, and deliver customer satisfaction., • Preventive maintenance (PM) and vehicle repairs responsibilities include but is not limited to:, • A/C & Heater: Operate the system and recognize if the system is cooling or not (PM related); Perform system checks such as power to compressor, visual inspection of condenser, belt tension, etc; Identify Freon and oil leaks, • Brakes-Air: Identify components of air brake system; Operate brakes and identify irregular noises, air leaks; Perform simple air system tests; Measure lining thickness; Adjust brakes; Perform air brake sections of P.M.; Measure drums, rotors, cam bushings Perform brake repairs per (BA298) once trained and qualified, • Brakes-Hydraulic: Road test for proper operation; Make visual inspections for leaks; Check park brake operation; Check fluid level; Measure lining thickness; Adjust service brakes; Perform brake repairs per (BH298) once trained and qualified; Adjust park brakes, • Cargo Handling/Transfer, Liftgates: Identify leaks; Operate lift gate; Identify make and model; Add fluid to bring to proper level; Make minor adjustments to lift platform and its controls; Identify basic malfunctions, • Charging Systems (electrical): Visually inspect batteries; Clean connections; Check condition of belts; Test batteries; Check alternator mounting and pulley; Replace and adjust belts; Perform basic charging system check, • Clutch: Lubricate throw-out bearing, linkage, shafts, and cables; Identify proper clutch operation; Identify proper clutch brake operation, • Cooling Systems: Check and adjust coolant levels; Visually inspect system for leaks; Make minor repairs such as hose replacements, fan shrouds, leaking fittings; Recognize permanent antifreezes and their requirements; Use refractometer; Use pressure tester; Flush and refill systems, • Cranking System (electrical): Inspect and test batteries; Visually inspect cables and cranking motor; Clean the battery cables, connections and starter; Replace batteries; Charge and check batteries; Replace or repair defective cables, • Lighting System and Electrical Accessories: Repair minor wiring problems; Replace bulbs, lenses and simple light assemblies; Repair minor lighting problems; Replace and adjust sealed beams; Install or replace accessories such as heated mirrors, fans, spotlights, • Drive Axles: Inspect housings for leaks; Change oil and filter, if required, and clean breathers, • Driveline: Lubricate drive line; Inspect components for wear or damage, • Gas Engines-All Engines: Check and adjust oil levels; Identify unusual noises, and oil leaks, • Fuel Systems: Replace and prime fuel filter; Check gas and diesel fuel system components such as fuel lines, pickup tubes, return lines, etc, for proper integrity and condition, • Preventive Maintenance: Proper lube techniques; Minimal tire inspection; Brake check/applied stroke; Battery check; Under vehicle check/loose components; Initial Fault code identification; All PMs (PM298) including C supplements to exclude overheads, engine brake overhauls, DPF servicing, clean doser injector, servicing ArvinMeritor unitized hubs, inspect Lece Neville alternator brushes, inspect modulator system for proper operation, inspect/adjust shift selector cable, pop test Isuzu injectors, • Steering and Non-driven Axles and Alignment: Lubricate grease fittings, check and adjust fluid levels; Check and adjust toe; Check all steering components for wear; Check and adjust trailer axle alignment; Adjust wheel bearings including replacement of wheel seal, • Suspension-Chassis and Cab: Identify makes and models; Identify normal operation; Identify and repair minor air leaks; Identify malfunctions of basic nature, broken springs, excessive wear on bushings, etc, • Tire and Wheel Maintenance: Perform air pressure checks; Check tread depth; Identify tires that need to be changed or repaired; Perform tire P.M. checks; Replace tire and wheel assemblies; Mount/dismount and rotate tires; Perform tire/wheel checks/repairs per (TW298), • Vehicle Coupling System (PM): Lubricate fifth wheel plate and slider mechanism; Operate slider mechanism, • Utilize key functions of Shop Management System and electronic documentation available. Perform work in accordance with all federal/provincial and corporate compliance guidelines (i.e. safety, DOT). Use internal and external maintenance documents, • Performs other duties as assigned., • Ensure proper maintenance of all service, safety and environmental records required to meet and/or exceed corporate, federal, state, and local government mandated requirements., • Accountable for key maintenance measurements established by company policy, related to the inspection and performance of PMs, brakes, tires, wheels, including any maintenance items directly associated with the safety of the customer. Posted Date 5 days ago (11/25/2025 1:23 PM) Requisition ID 2025-192013 Location (Posting Location) : State/Province PA Location (Posting Location) : City Philadelphia Location (Posting Location) : Postal Code 19114 Category Technicians/Service Employees9 Employment Type Regular-Full time Travel Requirements Greater than 60% Position Code 1001311 Min Pay USD $41.00/Hr. Max Pay USD $41.00/Hr.

Position Description Torque by Ryder is immediately hiring a Permanent Full Time Experienced Mobile Diesel Technician to support our Truck Fleet in Philadelphia, PA For More Info Call William or Text "Philly MS2" to 904-541-8565 Hear it from a Torque Mobile Mechanic Technician Here: • Technician Positions Pay Each Week, • Hourly Pay: $38.00 per hour, • Ability to earn additional monthly performance incentive, • Schedule: Flexible 40-hour work week (weekend premiums apply), • Fuel Card and Company Cell Phone provided, • For mobile technicians, work site service vehicle will be provided We want the right Maintenance Repair Mechanic Technician to join us at Ryder manage our fleet of Heavy Duty Trucks. At Ryder, we offer outstanding benefits: • Generous Paid Time Off, • Medical, Dental and Vision Insurance effective 30 days from hire date, • Life Insurance and Disability Insurance Options, • 401K Savings Plan with Ryder matching contributions, • Discount on purchase of Ryder Common Stock, • Employee Discounts on Automotive, Mobile plans, Travel and Hotels, • Accredited Tech School Tuition Reimbursement, • PPE & Uniforms provided at no cost, • Paid Job training and development Click Here to See All Ryder Careers: EEO/AA/Female/Minority/Disabled/Veteran Requirements • High school diploma or equivalent preferred, • Vocational or Technical Certification Post Secondary degree or Technical Certifications, preferred, • Basic tools, required, • Requires demonstrated aptitude and applied experience in mechanical repair of automotive gas or diesel engines including:, • Routine preventative maintenance, which should include oil changes, brake and tire work, • Two (2) years or more of a combination of classroom training and work experience in required experience, preferred, • NonCommercial Driver License CLASS E, preferred, • Valid Commercial Driver License (CDL) CLASS A, preferred, • Other State driver's license, as required, • One (1) year or more federal PM certification requirements through any combination of classroom training or work experience totaling 1 year, • One (1) year or more mechanical experience working offsite at customer locations preferred, • Able to take home assigned mobile service truck, as applicable, and secure vehicle and contents, • Must be able to drive Ryder vehicles, • Proven hands-on mechanic, customer service, and account management skills, • Demonstrates customer service skills, • Strong relationship management skills, • Strong verbal and written communication skills, • Flexibility to operate and self-driven to excel in a fast-paced environment, • Self-starter and self-sufficient approach, • Capable of multi-tasking, highly organized, with excellent time management skills, • Detailed oriented with excellent follow-up practicesEntrepreneurial spirit, • Ability to:, • Understand and adhere to Company policies in all areas, • Complete repair orders with the Company established systems, • Create and maintain professional relationships within all levels of the organization (peers, work groups, customers, supervisors), • Work independently and as a member of a team, • Prioritize workload, • Preventive Maintenance (PM230&PM298) within 90 Days, • Brakes-Air (BA220&BA298) within 90 Days, • Brake mechanics/inspectors FMCS 396.25, • Hydraulic Brake (BH220&BH298) where appropriate within 90 Days, • Tire & Wheel TW220 within 90 Days, • CF609 & A/C trained and qualified (AC220&AC298) within 180 Days, • Battery Charge and Check, Warranty, • HD electrical - DR208 within 90 Days, • Svc Island Support SBTIII trained (SBT220) and SBT Phase 2 within 180 Days, • OEM on-line engine courses (minimum 2), • This position requires for you to drive Ryder vehicles. In order to become a Ryder employee you must:, • Pass a Ryder Drug Test, • Pass a DOT physical, • Pass a Ryder road test Responsibilities • Interact with non-contractual Ryder customer, exhibit account management skills to independently facilitate preventative maintenance, repair issue resolution, and discuss any repair estimates with customer., • Coordinate work schedule as required by customers. Road test vehicles to identify cause of complaints for repairs, ensure quality of repair work performed, and deliver customer satisfaction., • Preventive maintenance (PM) and vehicle repairs responsibilities include but is not limited to:, • A/C & Heater: Operate the system and recognize if the system is cooling or not (PM related); Perform basic system checks such as power to compressor, visual inspection of condenser, belt tension, etc.; Identify Freon and oil leaks., • Brakes-Air: Identify components of air brake system; Operate brakes and identify irregular noises, air leaks; Perform simple air system tests; Measure lining thickness; Adjust brakes; Perform air brake sections of P.M.; Measure drums, rotors, cam bushings Perform brake repairs per (BA298) once trained and qualified., • Brakes-Hydraulic: Road test for proper operation; Make visual inspections for leaks; Check park brake operation; Check fluid level; Measure lining thickness; Adjust service brakes; Perform brake repairs per (BH298) once trained and qualified; Adjust park brakes., • Cargo Handling/Transfer, Liftgates: Identify leaks; Operate lift gate; Identify make and model; Add fluid to bring to proper level; Make minor adjustments to lift platform and its controls; Identify basic malfunctions., • Charging Systems (electrical): Visually inspect batteries; Clean connections; Check condition of belts; Test batteries; Check alternator mounting and pulley; Replace and adjust belts; Perform basic charging system check., • Clutch: Lubricate throw-out bearing, linkage, shafts, and cables; Identify proper clutch operation; Identify proper clutch brake operation., • Cooling Systems: Check and adjust coolant levels; Visually inspect system for leaks; Make minor repairs such as hose replacements, fan shrouds, leaking fittings; Recognize permanent antifreezes and their requirements; Use refractometer; Use pressure tester; Flush and refill systems., • Cranking System (electrical): Inspect and test batteries; Visually inspect cables and cranking motor; Clean the battery cables, connections and starter; Replace batteries; Charge and check batteries; Replace or repair defective cables., • Lighting System and Electrical Accessories: Repair minor wiring problems; Replace bulbs, lenses and simple light assemblies; Repair minor lighting problems; Replace and adjust sealed beams; Install or replace accessories such as heated mirrors, fans, spotlights., • Drive Axles: Inspect housings for leaks; Change oil and filter, if required, and clean breathers., • Driveline: Lubricate drive line; Inspect components for wear or damage., • Gas Engines-All Engines: Check and adjust oil levels; Identify unusual noises, and oil leaks., • Fuel Systems: Replace and prime fuel filter; Check gas and diesel fuel system components such as fuel lines, pickup tubes, return lines, etc... for proper integrity and condition., • Preventive Maintenance: Proper lube techniques; Minimal tire inspection; Brake check/applied stroke; Battery check; Under vehicle check/loose components; Initial Fault code identification; All PMs (PM298) including C supplements to exclude overheads, engine brake overhauls, DPF servicing, clean doser injector, servicing ArvinMeritor unitized hubs, inspect Lece Neville alternator brushes, inspect modulator system for proper operation, inspect/adjust shift selector cable, pop test Isuzu injectors, • Steering and Non-driven Axles and Alignment: Lubricate grease fittings, check and adjust fluid levels; Check and adjust toe; Check all steering components for wear; Check and adjust trailer axle alignment; Adjust wheel bearings including replacement of wheel seal., • Suspension-Chassis and Cab: Identify makes and models; Identify normal operation; Identify and repair minor air leaks; Identify malfunctions of basic nature, broken springs, excessive wear on bushings, etc., • Tire and Wheel Maintenance: Perform air pressure checks; Check tread depth; Identify tires that need to be changed or repaired; Perform tire P.M. checks; Replace tire and wheel assemblies; Mount/dismount and rotate tires; Perform tire/wheel checks/repairs per (TW298), • Vehicle Coupling System (PM): Lubricate fifth wheel plate and slider mechanism; Operate slider mechanism., • Utilize key functions of Shop Management System and electronic documentation available. - Perform work in accordance with all federal/ provincial and corporate compliance guidelines (i.e. safety, DOT). Use internal and external maintenance documents., • Ensure proper maintenance of all service, safety and environmental records required to meet and/or exceed corporate, federal, state, and local government mandated requirements., • Accountable for key maintenance measurements established by company policy, related to the inspection and performance of PMs, brakes, tires, wheels, including any maintenance items directly associated with the safety of the customer. Posted Date 5 days ago (11/25/2025 1:05 PM) Requisition ID 2025-191921 Location (Posting Location) : State/Province PA Location (Posting Location) : City Philadelphia Location (Posting Location) : Postal Code 19114 Category Technicians/Service Employees9 Employment Type Regular-Full time Travel Requirements Greater than 60% Position Code 1001312 Min Pay USD $38.00/Hr. Max Pay USD $38.00/Hr.

Position Description Torque by Ryder is immediately hiring a Permanent Full Time Experienced Mobile Diesel Technician to support our Truck Fleet in Philadelphia, PA For More Info Call Chelsey or Text "Philly MS2" to 904-932-0143 Hear it from a Torque Mobile Mechanic Technician Here: • Technician Positions Pay Each Week, • Hourly Pay: $38.00 per hour, • Ability to earn additional monthly performance incentive, • Schedule: Flexible 40-hour work week (weekend premiums apply) Tuesday-Saturday, • Fuel Card and Company Cell Phone provided, • For mobile technicians, work site service vehicle will be provided We want the right Maintenance Repair Mechanic Technician to join us at Ryder manage our fleet of Heavy Duty Trucks. At Ryder, we offer outstanding benefits: • Generous Paid Time Off, • Medical, Dental and Vision Insurance effective 30 days from hire date, • Life Insurance and Disability Insurance Options, • 401K Savings Plan with Ryder matching contributions, • Discount on purchase of Ryder Common Stock, • Employee Discounts on Automotive, Mobile plans, Travel and Hotels, • Accredited Tech School Tuition Reimbursement, • PPE & Uniforms provided at no cost, • Paid Job training and development Click Here to See All Ryder Careers: EEO/AA/Female/Minority/Disabled/Veteran Requirements • High school diploma or equivalent preferred, • Vocational or Technical Certification Post Secondary degree or Technical Certifications, preferred, • Basic tools, required, • Requires demonstrated aptitude and applied experience in mechanical repair of automotive gas or diesel engines including:, • Routine preventative maintenance, which should include oil changes, brake and tire work, • Two (2) years or more of a combination of classroom training and work experience in required experience, preferred, • NonCommercial Driver License CLASS E, preferred, • Valid Commercial Driver License (CDL) CLASS A, preferred, • Other State driver's license, as required, • One (1) year or more federal PM certification requirements through any combination of classroom training or work experience totaling 1 year, • One (1) year or more mechanical experience working offsite at customer locations preferred, • Able to take home assigned mobile service truck, as applicable, and secure vehicle and contents, • Must be able to drive Ryder vehicles, • Proven hands-on mechanic, customer service, and account management skills, • Demonstrates customer service skills, • Strong relationship management skills, • Strong verbal and written communication skills, • Flexibility to operate and self-driven to excel in a fast-paced environment, • Self-starter and self-sufficient approach, • Capable of multi-tasking, highly organized, with excellent time management skills, • Detailed oriented with excellent follow-up practicesEntrepreneurial spirit, • Ability to:, • Understand and adhere to Company policies in all areas, • Complete repair orders with the Company established systems, • Create and maintain professional relationships within all levels of the organization (peers, work groups, customers, supervisors), • Work independently and as a member of a team, • Prioritize workload, • Preventive Maintenance (PM230&PM298) within 90 Days, • Brakes-Air (BA220&BA298) within 90 Days, • Brake mechanics/inspectors FMCS 396.25, • Hydraulic Brake (BH220&BH298) where appropriate within 90 Days, • Tire & Wheel TW220 within 90 Days, • CF609 & A/C trained and qualified (AC220&AC298) within 180 Days, • Battery Charge and Check, Warranty, • HD electrical - DR208 within 90 Days, • Svc Island Support SBTIII trained (SBT220) and SBT Phase 2 within 180 Days, • OEM on-line engine courses (minimum 2), • This position requires for you to drive Ryder vehicles. In order to become a Ryder employee you must:, • Pass a Ryder Drug Test, • Pass a DOT physical, • Pass a Ryder road test Responsibilities • Interact with non-contractual Ryder customer, exhibit account management skills to independently facilitate preventative maintenance, repair issue resolution, and discuss any repair estimates with customer., • Coordinate work schedule as required by customers. Road test vehicles to identify cause of complaints for repairs, ensure quality of repair work performed, and deliver customer satisfaction., • Preventive maintenance (PM) and vehicle repairs responsibilities include but is not limited to:, • A/C & Heater: Operate the system and recognize if the system is cooling or not (PM related); Perform basic system checks such as power to compressor, visual inspection of condenser, belt tension, etc.; Identify Freon and oil leaks., • Brakes-Air: Identify components of air brake system; Operate brakes and identify irregular noises, air leaks; Perform simple air system tests; Measure lining thickness; Adjust brakes; Perform air brake sections of P.M.; Measure drums, rotors, cam bushings Perform brake repairs per (BA298) once trained and qualified., • Brakes-Hydraulic: Road test for proper operation; Make visual inspections for leaks; Check park brake operation; Check fluid level; Measure lining thickness; Adjust service brakes; Perform brake repairs per (BH298) once trained and qualified; Adjust park brakes., • Cargo Handling/Transfer, Liftgates: Identify leaks; Operate lift gate; Identify make and model; Add fluid to bring to proper level; Make minor adjustments to lift platform and its controls; Identify basic malfunctions., • Charging Systems (electrical): Visually inspect batteries; Clean connections; Check condition of belts; Test batteries; Check alternator mounting and pulley; Replace and adjust belts; Perform basic charging system check., • Clutch: Lubricate throw-out bearing, linkage, shafts, and cables; Identify proper clutch operation; Identify proper clutch brake operation., • Cooling Systems: Check and adjust coolant levels; Visually inspect system for leaks; Make minor repairs such as hose replacements, fan shrouds, leaking fittings; Recognize permanent antifreezes and their requirements; Use refractometer; Use pressure tester; Flush and refill systems., • Cranking System (electrical): Inspect and test batteries; Visually inspect cables and cranking motor; Clean the battery cables, connections and starter; Replace batteries; Charge and check batteries; Replace or repair defective cables., • Lighting System and Electrical Accessories: Repair minor wiring problems; Replace bulbs, lenses and simple light assemblies; Repair minor lighting problems; Replace and adjust sealed beams; Install or replace accessories such as heated mirrors, fans, spotlights., • Drive Axles: Inspect housings for leaks; Change oil and filter, if required, and clean breathers., • Driveline: Lubricate drive line; Inspect components for wear or damage., • Gas Engines-All Engines: Check and adjust oil levels; Identify unusual noises, and oil leaks., • Fuel Systems: Replace and prime fuel filter; Check gas and diesel fuel system components such as fuel lines, pickup tubes, return lines, etc... for proper integrity and condition., • Preventive Maintenance: Proper lube techniques; Minimal tire inspection; Brake check/applied stroke; Battery check; Under vehicle check/loose components; Initial Fault code identification; All PMs (PM298) including C supplements to exclude overheads, engine brake overhauls, DPF servicing, clean doser injector, servicing ArvinMeritor unitized hubs, inspect Lece Neville alternator brushes, inspect modulator system for proper operation, inspect/adjust shift selector cable, pop test Isuzu injectors, • Steering and Non-driven Axles and Alignment: Lubricate grease fittings, check and adjust fluid levels; Check and adjust toe; Check all steering components for wear; Check and adjust trailer axle alignment; Adjust wheel bearings including replacement of wheel seal., • Suspension-Chassis and Cab: Identify makes and models; Identify normal operation; Identify and repair minor air leaks; Identify malfunctions of basic nature, broken springs, excessive wear on bushings, etc., • Tire and Wheel Maintenance: Perform air pressure checks; Check tread depth; Identify tires that need to be changed or repaired; Perform tire P.M. checks; Replace tire and wheel assemblies; Mount/dismount and rotate tires; Perform tire/wheel checks/repairs per (TW298), • Vehicle Coupling System (PM): Lubricate fifth wheel plate and slider mechanism; Operate slider mechanism., • Utilize key functions of Shop Management System and electronic documentation available. - Perform work in accordance with all federal/ provincial and corporate compliance guidelines (i.e. safety, DOT). Use internal and external maintenance documents., • Ensure proper maintenance of all service, safety and environmental records required to meet and/or exceed corporate, federal, state, and local government mandated requirements., • Accountable for key maintenance measurements established by company policy, related to the inspection and performance of PMs, brakes, tires, wheels, including any maintenance items directly associated with the safety of the customer. Posted Date 5 days ago (11/25/2025 1:10 PM) Requisition ID 2025-191924 Location (Posting Location) : State/Province PA Location (Posting Location) : City Philadelphia Location (Posting Location) : Postal Code 19114 Category Technicians/Service Employees9 Employment Type Regular-Full time Travel Requirements Greater than 60% Position Code 1001312 Min Pay USD $38.00/Hr. Max Pay USD $38.00/Hr.

Position Description Torque by Ryder is Immediately hiring a Permanent Full Time Experienced Mobile Auto and Diesel Technician to support our Truck Fleet in Philadelphia, PA For More Info Call Jordon or text "Philadelphia" to 904-489-7273 Hear it from a Torque Mobile Mechanic Technician Here: • Technician Positions Pay Each Week, • Hourly Pay: $41.00 per hour, • Ability to earn additional monthly performance incentive, • Schedule: Flexible 40-hour work week (weekend premiums apply), • Fuel Card and Company Cell Phone provided, • For mobile technicians, work site service vehicle will be provided We want the right Maintenance Repair Mechanic Technician to join us at Ryder manage our fleet of Heavy Duty Trucks. For More Info Call Jordon or text "Philadelphia" to 904-489-7273 At Ryder, we offer outstanding benefits: • Generous Paid Time Off, • Medical, Dental and Vision Insurance effective 30 days from hire date, • Life Insurance and Disability Insurance Options, • 401K Savings Plan with Ryder matching contributions, • Discount on purchase of Ryder Common Stock, • Employee Discounts on Automotive, Mobile plans, Travel and Hotels, • Accredited Tech School Tuition Reimbursement, • PPE & Uniforms provided at no cost, • Paid Job training and development Click Here to See All Ryder Careers: EEO/AA/Female/Minority/Disabled/Veteran Requirements • High school diploma or equivalent preferred, • Vocational or Technical Certification Post Secondary degree or Technical Certifications, preferred, • Basic tools required, • Requires demonstrated aptitude and applied experience in mechanical repair of automotive gas or diesel engines including:, • Routine preventative maintenance, which should include oil changes, brake and tire work, • Diagnostics and repairs, including AC, electrical systems, • Advanced skilled level repairs to include some major engine repairs, diesel after treatment or automotive fuel injection repairs, • Three (3) years or more relevant work experience, preferred, • NonCommercial Driver License CLASS E, preferred, • Valid Commercial Driver License (CDL) CLASS A, preferred, • Other State driver's license, as required, • Two (2) years or more experience with mechanical repairs and diagnostics on heavy duty and medium duty equipment, • Able to take home assigned mobile service truck, as applicable, and secure vehicle and contents, • Must be able to drive Ryder vehicles, • Ability to:, • Understand and adhere to Company policies in all areas, • Complete repair orders with the Company established systems, • Create and maintain professional relationships within all levels of the organization (peers, work groups, customers, supervisors), • Work independently and as a member of a team, • Prioritize workload, • Proven hands-on mechanic, customer service, and account management skills, • Demonstrates customer service skills, • Strong relationship management skills, • Strong verbal and written communication skills, • Flexibility to operate and self-driven to excel in a fast-paced environment, • Self-starter and self-sufficient approach, • Capable of multi-tasking, highly organized, with excellent time management skills, • Detailed oriented with excellent follow-up practices, • Entrepreneurial spirit, • Preventive Maintenance (PM230&PM298) within 90 Days, • Brakes-Air (BA220&BA298) within 90 Days, • Brake mechanics/inspectors FMCS 396.25, • Hydraulic Brake (BH220&BH298) where appropriate within 90 Days, • Tire & Wheel TW220 within 90 Days, • CF609 & A/C trained and qualified (AC220&AC298) within 180 Days, • HD electrical - DR208 within 90 Days, • Svc Island Support SBTIII trained (SBT220) and SBT Phase 2 within 180 Days, • Complete 2 of the OEM On-Line diagnostic tool software courses as required by location fleet mi. (predominant OEM of fleet mix), • This position requires for you to drive Ryder vehicles. In order to become a Ryder employee you must:, • Pass a Ryder Drug Test, • Pass a DOT physical, • Pass a Ryder road test Responsibilities • Interact with customer, exhibit account management skills to independently facilitate preventative maintenance, repair issue resolution, and discuss new repair estimates with customer., • Coordinate work schedule as required by customers. Road test vehicles to identify cause of complaints for repairs, ensure quality of repair work performed, and deliver customer satisfaction., • Preventive maintenance (PM) and vehicle repairs responsibilities include but is not limited to:, • A/C & Heater: Operate the system and recognize if the system is cooling or not (PM related); Perform system checks such as power to compressor, visual inspection of condenser, belt tension, etc; Identify Freon and oil leaks, • Brakes-Air: Identify components of air brake system; Operate brakes and identify irregular noises, air leaks; Perform simple air system tests; Measure lining thickness; Adjust brakes; Perform air brake sections of P.M.; Measure drums, rotors, cam bushings Perform brake repairs per (BA298) once trained and qualified, • Brakes-Hydraulic: Road test for proper operation; Make visual inspections for leaks; Check park brake operation; Check fluid level; Measure lining thickness; Adjust service brakes; Perform brake repairs per (BH298) once trained and qualified; Adjust park brakes, • Cargo Handling/Transfer, Liftgates: Identify leaks; Operate lift gate; Identify make and model; Add fluid to bring to proper level; Make minor adjustments to lift platform and its controls; Identify basic malfunctions, • Charging Systems (electrical): Visually inspect batteries; Clean connections; Check condition of belts; Test batteries; Check alternator mounting and pulley; Replace and adjust belts; Perform basic charging system check, • Clutch: Lubricate throw-out bearing, linkage, shafts, and cables; Identify proper clutch operation; Identify proper clutch brake operation, • Cooling Systems: Check and adjust coolant levels; Visually inspect system for leaks; Make minor repairs such as hose replacements, fan shrouds, leaking fittings; Recognize permanent antifreezes and their requirements; Use refractometer; Use pressure tester; Flush and refill systems, • Cranking System (electrical): Inspect and test batteries; Visually inspect cables and cranking motor; Clean the battery cables, connections and starter; Replace batteries; Charge and check batteries; Replace or repair defective cables, • Lighting System and Electrical Accessories: Repair minor wiring problems; Replace bulbs, lenses and simple light assemblies; Repair minor lighting problems; Replace and adjust sealed beams; Install or replace accessories such as heated mirrors, fans, spotlights, • Drive Axles: Inspect housings for leaks; Change oil and filter, if required, and clean breathers, • Driveline: Lubricate drive line; Inspect components for wear or damage, • Gas Engines-All Engines: Check and adjust oil levels; Identify unusual noises, and oil leaks, • Fuel Systems: Replace and prime fuel filter; Check gas and diesel fuel system components such as fuel lines, pickup tubes, return lines, etc, for proper integrity and condition, • Preventive Maintenance: Proper lube techniques; Minimal tire inspection; Brake check/applied stroke; Battery check; Under vehicle check/loose components; Initial Fault code identification; All PMs (PM298) including C supplements to exclude overheads, engine brake overhauls, DPF servicing, clean doser injector, servicing ArvinMeritor unitized hubs, inspect Lece Neville alternator brushes, inspect modulator system for proper operation, inspect/adjust shift selector cable, pop test Isuzu injectors, • Steering and Non-driven Axles and Alignment: Lubricate grease fittings, check and adjust fluid levels; Check and adjust toe; Check all steering components for wear; Check and adjust trailer axle alignment; Adjust wheel bearings including replacement of wheel seal, • Suspension-Chassis and Cab: Identify makes and models; Identify normal operation; Identify and repair minor air leaks; Identify malfunctions of basic nature, broken springs, excessive wear on bushings, etc, • Tire and Wheel Maintenance: Perform air pressure checks; Check tread depth; Identify tires that need to be changed or repaired; Perform tire P.M. checks; Replace tire and wheel assemblies; Mount/dismount and rotate tires; Perform tire/wheel checks/repairs per (TW298), • Vehicle Coupling System (PM): Lubricate fifth wheel plate and slider mechanism; Operate slider mechanism, • Utilize key functions of Shop Management System and electronic documentation available. Perform work in accordance with all federal/provincial and corporate compliance guidelines (i.e. safety, DOT). Use internal and external maintenance documents, • Performs other duties as assigned., • Ensure proper maintenance of all service, safety and environmental records required to meet and/or exceed corporate, federal, state, and local government mandated requirements., • Accountable for key maintenance measurements established by company policy, related to the inspection and performance of PMs, brakes, tires, wheels, including any maintenance items directly associated with the safety of the customer. Posted Date 11 hours ago (12/3/2025 8:54 AM) Requisition ID 2025-192311 Location (Posting Location) : State/Province PA Location (Posting Location) : City Philadelphia Location (Posting Location) : Postal Code 19114 Category Technicians/Service Employees9 Employment Type Regular-Full time Travel Requirements Greater than 60% Position Code 1001311 Min Pay USD $41.00/Hr. Max Pay USD $41.00/Hr.

Position Description Torque by Ryder is Immediately hiring a Permanent Full Time Experienced Mobile Auto and Diesel Technician to support our Truck Fleet in Philadelphia, PA For More Info Call Jordon or text "Philadelphia" to 904-489-7273 Hear it from a Torque Mobile Mechanic Technician Here: • Technician Positions Pay Each Week, • Hourly Pay: $43.00 per hour, • Ability to earn additional monthly performance incentive, • Schedule: Flexible 40-hour work week (weekend premiums apply), • Fuel Card and Company Cell Phone provided, • For mobile technicians, work site service vehicle will be provided We want the right Maintenance Repair Mechanic Technician to join us at Ryder manage our fleet of Heavy Duty Trucks. For More Info Call Jordon or text "Philadelphia" to 904-489-7273 At Ryder, we offer outstanding benefits: • Generous Paid Time Off, • Medical, Dental and Vision Insurance effective 30 days from hire date, • Life Insurance and Disability Insurance Options, • 401K Savings Plan with Ryder matching contributions, • Discount on purchase of Ryder Common Stock, • Employee Discounts on Automotive, Mobile plans, Travel and Hotels, • Accredited Tech School Tuition Reimbursement, • PPE & Uniforms provided at no cost, • Paid Job training and development Click Here to See All Ryder Careers: EEO/AA/Female/Minority/Disabled/Veteran Requirements • High school diploma or equivalent preferred, • Vocational or Technical Certification Post Secondary degree or Technical Certifications, preferred, • Basic tools, required, • Requires demonstrated aptitude and applied experience in mechanical repair of automotive gas or diesel engines including:, • Routine preventative maintenance, which should include oil changes, brake and tire work, • Diagnostics and repairs, including AC, electrical systems, • Advanced skilled level repairs to include some major engine repairs, diesel after treatment or automotive fuel injection repairs, • Four (4) years or more Relevant work experience, preferred, • NonCommercial Driver License CLASS E, preferred, • Valid Commercial Driver License (CDL) CLASS A, preferred, • Other State driver's license, as required, • Four (4) years or more experience with mechanical repairs and diagnostics on heavy duty and medium duty equipment, • Must have minimum tools required to perform their job duties as outlined in Ryder's Maintenance policy 2.02, • Able to take home assigned mobile service truck, as applicable, and secure vehicle and contents, • Must be able to drive Ryder vehicles, • Ability to:, • Understand and adhere to Company policies in all areas, • Complete repair orders with the Company established systems, • Create and maintain professional relationships within all levels of the organization (peers, work groups, customers, supervisors), • Work independently and as a member of a team, • Prioritize workload, • Proven hands-on mechanic, customer service, and account management skills, • Demonstrates customer service skills, • Strong verbal and written communication skills, • Flexibility to operate and self-driven to excel in a fast-paced environment, • Self-starter and self-sufficient approach, • Capable of multi-tasking, highly organized, with excellent time management skills, • Detailed oriented with excellent follow-up practices, • Entrepreneurial spirit, • Preventive Maintenance (PM230&PM298) within 90 Days, • Brakes-Air (BA220&BA298) within 90 Days, • Brake mechanics/inspectors FMCS 396.25, • Hydraulic Brake (BH220&BH298) where appropriate within 90 Days, • Tire & Wheel TW220 within 90 Days, • CF609 & A/C trained and qualified (AC220&AC298) within 180 Days, • HD electrical - DR208 within 90 Days, • Svc Island Support SBTIII trained (SBT220) and SBT Phase 2 within 180 Days, • Complete 2 of the OEM On-Line diagnostic tool software courses as required by location fleet mi. (predominant OEM of fleet mix), • This position requires for you to drive Ryder vehicles. In order to become a Ryder employee you must:, • Pass a Ryder Drug Test, • Pass a DOT physical, • Pass a Ryder road test Responsibilities • Decision making: Responsible for making decisions surrounding vehicle diagnostics and repair, • Performs vehicle maintenance and repair duties including: standard vehicle maintenance, preventive maintenance, complex repairs with minimal (if any) support, • Demonstrate the ability to access and use internal and external maintenance documents - Diagnoses and repairs complex mechanical and electronic problems with minimal (if any) support, utilizing diagnostic computers/software when applicable, • Performs remote triage to with RCRC and customers to determine best solution to assist roadside breakdowns, • Performs facility maintenance duties, • Interacts with customers/drivers to properly determine nature of complaint once assigned a task, • Instructs and advises other technicians regarding maintenance repair procedures and diagnostics, • Interact with non-contractual customers, exhibit account management skills to independently facilitate preventative maintenance, repair issue resolution, and discuss new repair estimates with customer. Coordinate work schedule as required by customers. Road test vehicles to identify cause of complaints for repairs, ensure quality of repair work performed, and deliver customer satisfaction., • Preventive maintenance (PM) and vehicle repairs responsibilities include but is not limited to:, • A/C & Heater: Operate the system and recognize if the system is cooling or not (PM related); Perform system checks such as power to compressor, visual inspection of condenser, belt tension, etc; Identify Freon and oil leaks, • Brakes-Air: Identify components of air brake system; Operate brakes and identify irregular noises, air leaks; Perform simple air system tests; Measure lining thickness; Adjust brakes; Perform air brake sections of P.M.; Measure drums, rotors, cam bushings Perform brake repairs per (BA298) once trained and qualified, • Brakes-Hydraulic: Road test for proper operation; Make visual inspections for leaks; Check park brake operation; Check fluid level; Measure lining thickness; Adjust service brakes; Perform brake repairs per (BH298) once trained and qualified; Adjust park brakes, • Cargo Handling/Transfer, Liftgates: Identify leaks; Operate lift gate; Identify make and model; Add fluid to bring to proper level; Make minor adjustments to lift platform and its controls; Identify basic malfunctions, • Charging Systems (electrical): Visually inspect batteries; Clean connections; Check condition of belts; Test batteries; Check alternator mounting and pulley; Replace and adjust belts; Perform basic charging system check, • Clutch: Lubricate throw-out bearing, linkage, shafts, and cables; Identify proper clutch operation; Identify proper clutch brake operation, • Cooling Systems: Check and adjust coolant levels; Visually inspect system for leaks; Make minor repairs such as hose replacements, fan shrouds, leaking fittings; Recognize permanent antifreezes and their requirements; Use refractometer; Use pressure tester; Flush and refill systems, • Cranking System (electrical): Inspect and test batteries; Visually inspect cables and cranking motor; Clean the battery cables, connections and starter; Replace batteries; Charge and check batteries; Replace or repair defective cables, • Lighting System and Electrical Accessories: Repair minor wiring problems; Replace bulbs, lenses and simple light assemblies; Repair minor lighting problems; Replace and adjust sealed beams; Install or replace accessories such as heated mirrors, fans, spotlights, • Drive Axles: Inspect housings for leaks; Change oil and filter, if required, and clean breathers, • Driveline: Lubricate drive line; Inspect components for wear or damage, • Gas Engines-All Engines: Check and adjust oil levels; Identify unusual noises, and oil leaks, • Fuel Systems: Replace and prime fuel filter; Check gas and diesel fuel system components such as fuel lines, pickup tubes, return lines, etc, for proper integrity and condition, • Preventive Maintenance: Proper lube techniques; Minimal tire inspection; Brake check/applied stroke; Battery check; Under vehicle check/loose components; Initial Fault code identification; All PMs (PM298) including C supplements to exclude overheads, engine brake overhauls, DPF servicing, clean doser injector, servicing ArvinMeritor unitized hubs, inspect Lece Neville alternator brushes, inspect modulator system for proper operation, inspect/adjust shift selector cable, pop test Isuzu injectors, • Steering and Non-driven Axles and Alignment: Lubricate grease fittings, check and adjust fluid levels; Check and adjust toe; Check all steering components for wear; Check and adjust trailer axle alignment; Adjust wheel bearings including replacement of wheel seal, • Suspension-Chassis and Cab: Identify makes and models; Identify normal operation; Identify and repair minor air leaks; Identify malfunctions of basic nature, broken springs, excessive wear on bushings, etc, • Tire and Wheel Maintenance: Perform air pressure checks; Check tread depth; Identify tires that need to be changed or repaired; Perform tire P.M. checks; Replace tire and wheel assemblies; Mount/dismount and rotate tires; Perform tire/wheel checks/repairs per (TW298), • Vehicle Coupling System (PM): Lubricate fifth wheel plate and slider mechanism; Operate slider mechanism, • Utilize key functions of Shop Management System and electronic documentation available. Perform work in accordance with all federal/provincial and corporate compliance guidelines (i.e. safety, DOT). Use internal and external maintenance documents, • Performs other duties as assigned., • Ensure proper maintenance of all service, safety and environmental records required to meet and/or exceed corporate, federal, state, and local government mandated requirements. Posted Date 11 hours ago (12/3/2025 8:52 AM) Requisition ID 2025-192310 Location (Posting Location) : State/Province PA Location (Posting Location) : City Philadelphia Location (Posting Location) : Postal Code 19114 Category Technicians/Service Employees9 Employment Type Regular-Full time Travel Requirements Greater than 60% Position Code 1001374 Min Pay USD $43.00/Hr. Max Pay USD $43.00/Hr.

Position Description Torque by Ryder is Immediately hiring a Permanent Full Time Experienced Mobile Auto and Diesel Technician to support our Truck Fleet in Philadelphia, PA For More Info Call Jordon or text "Philadelphia" to 904-489-7273 Hear it from a Torque Mobile Mechanic Technician Here: • Technician Positions Pay Each Week, • Hourly Pay: $41.00 per hour, • Ability to earn additional monthly performance incentive, • Schedule: Flexible 40-hour work week (weekend premiums apply), • Fuel Card and Company Cell Phone provided, • For mobile technicians, work site service vehicle will be provided We want the right Maintenance Repair Mechanic Technician to join us at Ryder manage our fleet of Heavy Duty Trucks. For More Info Call Jordon or text "Philadelphia" to 904-489-7273 At Ryder, we offer outstanding benefits: • Generous Paid Time Off, • Medical, Dental and Vision Insurance effective 30 days from hire date, • Life Insurance and Disability Insurance Options, • 401K Savings Plan with Ryder matching contributions, • Discount on purchase of Ryder Common Stock, • Employee Discounts on Automotive, Mobile plans, Travel and Hotels, • Accredited Tech School Tuition Reimbursement, • PPE & Uniforms provided at no cost, • Paid Job training and development Click Here to See All Ryder Careers: EEO/AA/Female/Minority/Disabled/Veteran Requirements • High school diploma or equivalent preferred, • Vocational or Technical Certification Post Secondary degree or Technical Certifications, preferred, • Basic tools required, • Requires demonstrated aptitude and applied experience in mechanical repair of automotive gas or diesel engines including:, • Routine preventative maintenance, which should include oil changes, brake and tire work, • Diagnostics and repairs, including AC, electrical systems, • Advanced skilled level repairs to include some major engine repairs, diesel after treatment or automotive fuel injection repairs, • Three (3) years or more relevant work experience, preferred, • NonCommercial Driver License CLASS E, preferred, • Valid Commercial Driver License (CDL) CLASS A, preferred, • Other State driver's license, as required, • Two (2) years or more experience with mechanical repairs and diagnostics on heavy duty and medium duty equipment, • Able to take home assigned mobile service truck, as applicable, and secure vehicle and contents, • Must be able to drive Ryder vehicles, • Ability to:, • Understand and adhere to Company policies in all areas, • Complete repair orders with the Company established systems, • Create and maintain professional relationships within all levels of the organization (peers, work groups, customers, supervisors), • Work independently and as a member of a team, • Prioritize workload, • Proven hands-on mechanic, customer service, and account management skills, • Demonstrates customer service skills, • Strong relationship management skills, • Strong verbal and written communication skills, • Flexibility to operate and self-driven to excel in a fast-paced environment, • Self-starter and self-sufficient approach, • Capable of multi-tasking, highly organized, with excellent time management skills, • Detailed oriented with excellent follow-up practices, • Entrepreneurial spirit, • Preventive Maintenance (PM230&PM298) within 90 Days, • Brakes-Air (BA220&BA298) within 90 Days, • Brake mechanics/inspectors FMCS 396.25, • Hydraulic Brake (BH220&BH298) where appropriate within 90 Days, • Tire & Wheel TW220 within 90 Days, • CF609 & A/C trained and qualified (AC220&AC298) within 180 Days, • HD electrical - DR208 within 90 Days, • Svc Island Support SBTIII trained (SBT220) and SBT Phase 2 within 180 Days, • Complete 2 of the OEM On-Line diagnostic tool software courses as required by location fleet mi. (predominant OEM of fleet mix), • This position requires for you to drive Ryder vehicles. In order to become a Ryder employee you must:, • Pass a Ryder Drug Test, • Pass a DOT physical, • Pass a Ryder road test Responsibilities • Interact with customer, exhibit account management skills to independently facilitate preventative maintenance, repair issue resolution, and discuss new repair estimates with customer., • Coordinate work schedule as required by customers. Road test vehicles to identify cause of complaints for repairs, ensure quality of repair work performed, and deliver customer satisfaction., • Preventive maintenance (PM) and vehicle repairs responsibilities include but is not limited to:, • A/C & Heater: Operate the system and recognize if the system is cooling or not (PM related); Perform system checks such as power to compressor, visual inspection of condenser, belt tension, etc; Identify Freon and oil leaks, • Brakes-Air: Identify components of air brake system; Operate brakes and identify irregular noises, air leaks; Perform simple air system tests; Measure lining thickness; Adjust brakes; Perform air brake sections of P.M.; Measure drums, rotors, cam bushings Perform brake repairs per (BA298) once trained and qualified, • Brakes-Hydraulic: Road test for proper operation; Make visual inspections for leaks; Check park brake operation; Check fluid level; Measure lining thickness; Adjust service brakes; Perform brake repairs per (BH298) once trained and qualified; Adjust park brakes, • Cargo Handling/Transfer, Liftgates: Identify leaks; Operate lift gate; Identify make and model; Add fluid to bring to proper level; Make minor adjustments to lift platform and its controls; Identify basic malfunctions, • Charging Systems (electrical): Visually inspect batteries; Clean connections; Check condition of belts; Test batteries; Check alternator mounting and pulley; Replace and adjust belts; Perform basic charging system check, • Clutch: Lubricate throw-out bearing, linkage, shafts, and cables; Identify proper clutch operation; Identify proper clutch brake operation, • Cooling Systems: Check and adjust coolant levels; Visually inspect system for leaks; Make minor repairs such as hose replacements, fan shrouds, leaking fittings; Recognize permanent antifreezes and their requirements; Use refractometer; Use pressure tester; Flush and refill systems, • Cranking System (electrical): Inspect and test batteries; Visually inspect cables and cranking motor; Clean the battery cables, connections and starter; Replace batteries; Charge and check batteries; Replace or repair defective cables, • Lighting System and Electrical Accessories: Repair minor wiring problems; Replace bulbs, lenses and simple light assemblies; Repair minor lighting problems; Replace and adjust sealed beams; Install or replace accessories such as heated mirrors, fans, spotlights, • Drive Axles: Inspect housings for leaks; Change oil and filter, if required, and clean breathers, • Driveline: Lubricate drive line; Inspect components for wear or damage, • Gas Engines-All Engines: Check and adjust oil levels; Identify unusual noises, and oil leaks, • Fuel Systems: Replace and prime fuel filter; Check gas and diesel fuel system components such as fuel lines, pickup tubes, return lines, etc, for proper integrity and condition, • Preventive Maintenance: Proper lube techniques; Minimal tire inspection; Brake check/applied stroke; Battery check; Under vehicle check/loose components; Initial Fault code identification; All PMs (PM298) including C supplements to exclude overheads, engine brake overhauls, DPF servicing, clean doser injector, servicing ArvinMeritor unitized hubs, inspect Lece Neville alternator brushes, inspect modulator system for proper operation, inspect/adjust shift selector cable, pop test Isuzu injectors, • Steering and Non-driven Axles and Alignment: Lubricate grease fittings, check and adjust fluid levels; Check and adjust toe; Check all steering components for wear; Check and adjust trailer axle alignment; Adjust wheel bearings including replacement of wheel seal, • Suspension-Chassis and Cab: Identify makes and models; Identify normal operation; Identify and repair minor air leaks; Identify malfunctions of basic nature, broken springs, excessive wear on bushings, etc, • Tire and Wheel Maintenance: Perform air pressure checks; Check tread depth; Identify tires that need to be changed or repaired; Perform tire P.M. checks; Replace tire and wheel assemblies; Mount/dismount and rotate tires; Perform tire/wheel checks/repairs per (TW298), • Vehicle Coupling System (PM): Lubricate fifth wheel plate and slider mechanism; Operate slider mechanism, • Utilize key functions of Shop Management System and electronic documentation available. Perform work in accordance with all federal/provincial and corporate compliance guidelines (i.e. safety, DOT). Use internal and external maintenance documents, • Performs other duties as assigned., • Ensure proper maintenance of all service, safety and environmental records required to meet and/or exceed corporate, federal, state, and local government mandated requirements., • Accountable for key maintenance measurements established by company policy, related to the inspection and performance of PMs, brakes, tires, wheels, including any maintenance items directly associated with the safety of the customer. Posted Date 1 month ago (10/29/2025 3:15 PM) Requisition ID 2025-190626 Location (Posting Location) : State/Province PA Location (Posting Location) : City Philadelphia Location (Posting Location) : Postal Code 19114 Category Technicians/Service Employees9 Employment Type Regular-Full time Travel Requirements Greater than 60% Position Code 1001311 Min Pay USD $41.00/Hr. Max Pay USD $41.00/Hr.

Job DescriptionDescription: Title: Electrical Testing Technician Company Overview: Potomac Testing, a TechPro Power Group company, has been a leading provider of comprehensive low, medium, and high voltage electrical equipment services since 1985. The company offers a range of services, including NETA acceptance and maintenance testing, planned and emergency field services, power quality and engineering studies, and retrofitting and refurbishment of electrical equipment. Position Type: Full-Time About Us: Potomac Testing, a member of the TechPro Power Group family, is renowned for its expertise in electrical equipment services. With a history dating back to 1985, our commitment to excellence has made us a trusted partner in the industry. Job Summary: Potomac Testing is seeking an experienced Electrical Testing Technician to join our team. The successful candidate will perform acceptance and maintenance testing on low and medium-voltage switchgear, circuit breakers, transformers, protective relays, automatic transfer switches, motor control centers, ground systems, etc. This position will require the ability to operate various testing tools and equipment, as well as read and interpret electrical control schematics and diagrams. The Electrical Testing Technician will also be responsible for documenting services by maintaining records and writing technical reports detailing field work performed. Responsibilities: • Perform acceptance and maintenance testing on electrical equipment per NETA standards, • Operate various testing tools and equipment including megger, digital multimeter, Hipot tester, multiamp relay tester, GFI, TTR, primary and secondary injection set, etc., • Document services by maintaining records and writing technical reports detailing field work performed, • Read and interpret electrical control schematics and diagrams, • Perform extensive testing, problem identification, and troubleshooting, • Inspect and service transformers, switchgear, and relays, • Evaluate the operating condition of equipment, • Fundamental understanding of electrical and mechanical testing procedures, • Familiarity with electrical test equipment and fundamentals, • Experience in performing extensive testing, problem identification, and troubleshooting, • Strong background in troubleshooting and performing start-up service, • NETA level II, III, or IV Certification preferred, • Strong verbal and written communication skills, • Negotiable salary $30.00 - $60.00 per hour depending on experience, • Discretionary annual bonus based on personal performance, company performance, and other business considerations., • Full benefits package, with paid holidays and paid vacation dependent on locationRequirements:

Job Description We are looking for a Test Automation Lead to assess software quality through manual and automated testing. You will be responsible for finding and reporting bugs and glitches. In this role, you should have a keen eye for detail and excellent communication skills. If you are also competent in executing test cases and are passionate about quality, we’d like to meet you. Ultimately, you will ensure that our products, applications and systems work correctly. Responsibilities • Review and analyze system specifications, • Collaborate with the Application Development team to develop effective strategies and test plans, • Execute test cases (manual or automated) and analyze results, • Evaluate product code according to specifications, • Create logs to document testing phases and defects, • Report bugs and errors to development teams, • Help troubleshoot issues, • Conduct post-release/ post-implementation testing, • Work with cross-functional teams to ensure quality throughout the software development lifecycle Requirements • 6 years of relevant and progressive software development/testing, systems engineering and/or architecture experience., • Strong hands-on automation tester with experience working on different automation frameworks., • Exposure to Testing open shift application, • Knowledge and experience with Microsoft TFS Azure DevOps, • Knowledge and experience with Agile development and testing, • Strong written and verbal communication skills, • Strong organizational and time management skills, • Ability to do multi-task effectively, • Knowledge on performance testing using JMeter is an advantage, • Strong automation skills with Core JAVA basics skills is a must, • Strong knowledge in Selenium, TestNG, BDD automation framework is must, • API testing experience is a must

Job Description Role:-QA Manual Tester (Need Locals) Location:-Blue Bell, PA. Visa:- Any Duration:- 12Months Interview:- Phone/Skype Job Description:- We look for the following qualities/strengths in candidates applying for the manual tester role. • Fast learner, • SQL skills, • Data analysis, • Excellent verbal and written communication, • Great at problem-solving, reasoning and logic, • Ability to create detailed, comprehensive and well-structured test plans and test cases, • Self-starter Our environment is very fast-paced and we are always faced with competing timelines and juggling multiple projects at a time. Individuals need to be fluid and confident! This position is manual, however, if the individual has automated experience that is a plus. Not required though.

Job DescriptionBenefits: • 401(k) matching, • Company car, • Competitive salary, • Dental insurance, • Flexible schedule, • Free uniforms, • Health insurance, • Opportunity for advancement, • Paid time off, • Training & development, • Perform routine inspections, testing, and maintenance of fire sprinkler systems in commercial, industrial, and residential properties in accordance with NFPA standards and local codes., • Install and repair wet-pipe and dry-pipe fire suppression systems., • Conduct testing and maintenance of backflow prevention devices, ensuring compliance and proper function., • Troubleshoot, repair, and maintain system components including valves, alarms, hydrants, and piping., • Document all work performed accurately and thoroughly, including inspection reports, service orders, and repair recommendations., • Communicate effectively with clients to explain system issues, repair options, and maintenance schedules., • Maintain an organized service vehicle and accurate inventory of parts and tools., • Adhere strictly to all safety protocols and company policies.Qualifications:, • Proven experience as a Fire Sprinkler Technician, demonstrating expertise in wet and dry systems., • Strong understanding of NFPA 13, 25, and other relevant fire and building codes [1]., • Ability to read and interpret blueprints and construction drawings., • Valid driver's license and a clean driving record., • Excellent problem-solving skills and attention to detail., • Strong communication and customer service skills.Additional Desired Skills (A Plus):, • Experience with the inspection, maintenance, and repair of fire pumps., • Relevant certifications (e.g., NICET certification in Fire Protection Engineering Technology or a Backflow Prevention Assembly Tester certification) [1, 2]., • Experience with special hazard systems (e.g., pre-action, deluge, foam).Physical Requirements:, • Ability to lift and carry heavy equipment and materials., • Comfortable working at heights, in confined spaces, and in various weather conditions.

Job Description Title: Low Voltage Structured Cable Technician Level 1 Location: Southern New Jersey & PA Coranet Corp. is seeking a Level 1 Cable Technician to join our Field Service teams. The Technician will work under our Lead Cable Technicians on Coranet's structured cabling technician teams to entirely and successfully install low-voltage projects, including structured cabling, access control, physical security, wireless, and AV projects across New Jersey, including Southern New Jersey and PA. A Technician I works with moderate supervision and guidance from a Technician II and III or operations coordinator, installing, testing, and troubleshooting telecommunication connectivity systems. Individuals classified as Technician I are familiar with telecommunications installation but have not yet obtained the experience or expertise required for the Leads or Technician II classifications. Individuals in this classification may hold a BICSI or manufacturer certification and are willing and able to accept direction, guidance, and critique from individuals in advanced classifications. Only local candidates will be considered. Have demonstrated experience: 1. with copper (CAT5e/CAT6) and fiber [single mode/multi mode] cable: rough-in, labeling, terminations, and testing., 2. with copper patch panel: dress-in; terminations; labeling; and, testing., 3. patching according to a customer-provided switch matrix., 4. with Fluke Networks [or equivalent] copper/fiber cable tester/analyzer., 5. working with General Contractors and other project trades, e.g., electrical, furniture, carpet, etc., 6. with the receipt and inventory of drop-shipped project materials., 7. with LAN rack: assembly; grounding; cable runways; cable tray; etc., 8. in extending carrier POTS; T1; cable TV circuits., 9. working in new or existing client office environments. Qualifications • Ability to pass pre-employment screening, • Valid Drivers License, • Finger & wrist dexterity & hand/eye coordination., • Ability to work from heights such as man lifts, scissor lifts & rooftops, utilizing proper fall protection., • Ability to use small hand tools., • Ability to use power tools., • Climbing of stairs, ladders, and/or scaffolds., • Demonstrated written & verbal skills., • Available for off-hour assignments., • Copper or fiber Certifications, e.g., CommScope, Corning, etc., • OSHA 30 Certification, • SST Card, • Capable of operating with minimal supervision., • Valid driver's license, • Access to vehicle, • Willing to travel across NJ, PA, and Metro NY, • Job is usually performed in indoor/outdoor environments under multiple environmental conditions., • Ability to accept periodic assignments that involve travel away from immediate district office area based on client needs, business needs and project scope., • Exposure to noisy or dusty conditions; chemicals & solvents; mechanical, electrical, and/or other hazards., • General hours of Monday through Friday 8:00am to 5:00pm - but ability to provide support during and outside regular business hours is required., • Must be able to work in the United States.

Title: Penetration Tester Location: Fort Washington, PA 19034 Schedule: Hybrid, 2 days onsite per week Duration: Direct Hire Compensation: $115-150k/yr based on years of experience, education, certifications, and more of Ints: 2-3 rounds Start Date: Approx end of Jan 2025 Must Haves • 3–5 years of experience as a Penetration Tester, • Demonstrated expertise in Red Team operations and advanced penetration testing techniques, • Hands-on experience with offensive security initiatives, including internal and external penetration testing, adversarial simulations, and red team operations targeting infrastructure, applications, and user awareness, • Proven ability to exploit systems, escalate privileges, and identify security gaps in complex environments Plusses • OSCP or similar certifications, • Prior experience working in healthcare environments or with healthcare data, • Familiarity with HIPAA compliance and healthcare-specific threat models Day to Day A large healthcare provider is seeking a Penetration Tester to join its cybersecurity team. This individual will be part of the Red Team, responsible for executing offensive security initiatives across the organization. Daily responsibilities include conducting internal and external penetration tests, simulating adversarial attacks, and identifying vulnerabilities in systems, networks, and applications. The tester will collaborate with other security professionals to document findings, provide remediation recommendations, and contribute to strengthening the organization’s overall security posture. The role requires strong technical skills, creativity in attack simulation, and the ability to communicate findings clearly to both technical and non-technical stakeholders.

Job Description "Defensive Driving Academy offers the best part-time employment opportunity on the planet for many reasons. We offer flexible hours, and you can tell us what days and times are best for your schedule on a monthly basis. We have instructors that work 8 hours a week, some who work 15 hours a week, and others who work 25 or 35 hours a week. Best of all, DDA is the only company that offers time-and-a-half and double-time to its part-time employees. Our starting rates are always more competitive than Walmart, Target,Costco, Amazon and Lowes, and talented part-time employees will always be recognized and offered advancement opportunities and full-time positions." WE ARE- A private driver training school and third party license testing facility hiring detail-oriented part-time driving instructors, teachers, and license testers, with the potential for full time, to start training immediately. Teaching, coaching, mentoring, law enforcement, defensive driving, license testing or driving instructor experience of any kind is excellent, but only a great personality, committed work ethic, and strong desire to help others is required. • Flexible Hours - Tell us what days and times are best for you., • Our company operates 7 days a week., • Instructor/Tester schedules are usually the same days week to week. Responsibilities and Duties BEHIND-THE-WHEEL INSTRUCTOR & LICENSE TESTER- This position requires a team player with an "over and above" mindset and the unwavering ability to communicate, correct and connect. Driving instructors must be extremely patient, truly enjoy working hard to help people (especially youth), be detail oriented, and have the ability to remain firm with students and parents who sometimes forget our rules and guidelines, which exist, in order to keep our private driver training school running at a high level of efficiency. Part time instructors must be available to work a minimum of 10-12 part time hours per week on a consistent basis, while other part time instructors might prefer to work 20 or 30 hours per week instead. Full time employment opportunities, including supervisory and management positions will be offered to those candidates who excel as instructors. Weekend availability is always a plus and full time positions will be offered based on performance, attendance, and results. We are certified by PennDOT to perform non-commercial license testing, therefore, ideal candidates will be invited to become certified by PennDOT to perform license testing, and, advance into other administrative positions as our company continues to grow and expand our partnerships. We provide fully insured driving school cars with dual braking and gas for teaching. Qualifications and Skills REQUIREMENTS- For all positions you must be at least 25 years of age; possess a valid PA driver license; have no at fault accidents or citations with points for 5 years; cell phone with texting; have internet access; be able to deal with different personalities; be punctual; be comfortable driving in all conditions; remain committed to the days and times agreed to upon hiring; pass the DMV test again, and pass the following 4 background checks: • Federal check with fingerprint screening, • State criminal record check, • Child abuse clearance, • 3 year PA driving/DMV report Benefits WE OFFER- FLEXIBILITY!!! you tell us what days and times are best for you. Paid instructor training, competitive pay, direct deposit, PTO, annual wage increases, performance bonuses and opportunities for advancement as our rapidly expanding company expands its third party license testing partnership with PennDOT, retail partnership with AutoLenders, and research partnership with CHOP (Children's Hospital of Philadelphia). We are an Equal Opportunity Employer. COVID-19 Precaution(s): • Temperature screenings 1DbbyLVnKh