Trabajos thermal engineer en Atlanta, GeorgiaCrear alertas

This is a US based position only - Sponsorship not provided. This is not a data engineering role. Job Description – Data Center Senior Mechanical Commissioning Engineer Employment Type: Full-Time, Exempt Travel Requirement: 60–80% Position Summary The Senior Mechanical Commissioning Engineer is a senior technical contributor responsible for leading mechanical commissioning scopes on mission-critical data center projects. This role bridges hands-on execution and technical leadership, owning complex mechanical testing activities while mentoring junior engineers and supporting discipline leads and project managers in delivering reliable, resilient cooling and mechanical systems in alignment with the Anchor Mission Critical Playbook. Key Responsibilities • Lead mechanical commissioning scopes under the direction of the Mechanical Commissioning Lead or Cx PM, • Execute and oversee Pre-Functional Checks (PFCs), including L2/L3 readiness inspections, • Develop, execute, and document Functional Performance Testing (FPT), • Support Integrated Systems Testing (IST), including thermal failure and recovery scenarios, • Coordinate with controls, electrical teams, contractors, and OEMs during testing and troubleshooting, • Identify and resolve mechanical issues; escalate risks using Anchor Mission Critical issue protocols, • Review test results and commissioning documentation for accuracy and completeness, • Mentor and guide Mechanical Commissioning Engineers Technical Competencies • Strong understanding of mission-critical cooling systems and architectures, • Experience with CRAH/CRAC units, chillers, pumps, valves, heat exchangers, liquid cooling, and heat rejection systems, • Ability to interpret mechanical drawings, P&IDs, and sequences of operation, • Working knowledge of controls integration, sensor strategy, and redundancy concepts, • Familiarity and experience with commissioning platforms Education & Experience Requirements Required: • Bachelor’s degree in Mechanical Engineering or equivalent experience, • 6–12 years of experience in mission-critical or high-reliability mechanical systems, • Demonstrated experience executing mechanical commissioning on data center projects Preferred: • Hyperscale or large colocation data center experience, • Prior experience in a senior or lead commissioning role Certifications (Preferred) • Certified Commissioning Professional (CCP), • OSHA 30-Hour Construction Safety Compensation & Benefits - Competitive base salary commensurate with experience - Performance-based bonus eligibility - Travel expenses and per diem per company policy - Benefits eligibility per company plansPerformance Expectations • Independent ownership of mechanical commissioning scopes, • Successful execution of thermal and redundancy testing, • High-quality, defensible commissioning documentation, • Effective mentorship of junior engineers, • Demonstrated readiness to progress into a Lead role Salary Range $120,000 – $151,000 This range reflects nominal experience of 6–12 years in mission-critical mechanical commissioning. Compensation above the stated range may be considered for exceptional technical depth or leadership capability. Anchor Mission Critical offers a performance incentive bonus program that rewards individuals who consistently deliver high-quality outcomes and contribute to the company’s growth and operating discipline. Bonus eligibility and payout are based on a combination of individual performance, project success, and company-wide results. Employment Status This position is full-time and exempt. Employment is at-will, subject to applicable state and federal law. About Anchor Mission Critical Anchor Mission Critical is a professional services firm purpose-built to support hyperscale and high-reliability infrastructure projects. Anchor Mission Critical provides commissioning, integrated systems testing (IST), QA/QC, and operational readiness services for data centers and other no-fail environments. Anchor Mission Critical was founded to address a persistent industry challenge: as data center projects grow in scale and complexity, execution quality too often depends on heroics rather than disciplined systems. The Anchor Mission Critical Playbook establishes a standardized delivery framework built on readiness, risk prevention, and repeatable execution—allowing teams to perform at a high level without chaos. At Anchor Mission Critical, commissioning is engaged early and treated as a leadership function, not a back-end checkbox. Our teams operate with clear delivery cadence, defined readiness gates, and transparent issue management so professionals can focus on doing the work right – first time. Anchor Mission Critical supports both technical and leadership career paths and offers the opportunity to help build durable standards, mentor teams, and grow with a firm designed for scale without bureaucracy.

Job Title: Fluidics Engineer III Duration: 18+ Months Contract with possible extension Location: Atlanta, GA Role Summary Seeking a Fluidics Engineer III with strong hands-on lab testing experience to design and develop fluidic and thermal systems for foodservice/beverage equipment. The role involves testing, validation, and cross-functional collaboration within a stage-gate development process. Key Responsibilities • Perform lab and system-level testing to troubleshoot and validate designs, • Support DFMEA, DOE, and reliability testing, • Design fluidic and thermal mechanical systems, • Collaborate with software, electrical, and manufacturing teams, • Define requirements and ensure product performance and quality, • Use 8D/A3/DMAIC for problem-solving, • Create designs using CREO and manage changes in Windchill Required Qualifications • Bachelor’s (ABET) in Mechanical, Aerospace, Biomedical, or Mechatronics Engineering, • Strong knowledge of thermodynamics, fluid dynamics, and electromechanical systems, • Mandatory: Hands-on laboratory testing experience, • Experience with testing, data analysis, and technical documentation Preferred • Master’s degree, • Experience with MATLAB, Python, or LabVIEW, • Exposure to embedded systems and stage-gate development

Overview We’re seeking a highly skilled Senior Mechanical Engineer to lead mechanical design, field engineering, and commissioning activities for large‑scale data center projects. This role is ideal for someone who combines deep technical expertise with hands‑on field experience and thrives in fast‑paced, mission‑critical environments. Currently we have 3 openings in the following locations: Atlanta, GA/ Cheyenne, WY/ Omaha, NE Key Responsibilities Design & Engineering Leadership • Lead the mechanical design of data center systems, including HVAC, chilled water, DX systems, ventilation, and air distribution., • Develop and review mechanical drawings, specifications, equipment selections, and system layouts., • Perform load calculations, energy modeling, and system optimization for high‑efficiency, high‑availability environments., • Ensure designs meet project requirements, industry standards, and owner criteria for mission‑critical reliability., • Partner with commissioning professionals throughout project timeline Field Engineering & Construction Support • Oversee onsite installation, testing, and commissioning of mechanical systems., • Provide technical guidance to contractors, vendors, and field teams to resolve design or installation issues., • Conduct site inspections, equipment start‑ups, and functional performance testing., • Validate that installed systems align with design intent and operational requirements. Project & Stakeholder Coordination • Collaborate closely with electrical, controls, and architectural teams to ensure integrated system performance., • Interface with clients, facility operators, and project managers to communicate design decisions and field progress., • Support procurement efforts, including equipment evaluations and vendor coordination. Required Qualifications • Bachelor’s degree in Mechanical Engineering or related field., • 8+ years of mechanical engineering experience, with at least 3 years focused on HVAC system design., • Demonstrated experience with data centers, mission‑critical facilities, or other high‑availability environments., • Strong understanding of cooling technologies such as CRAH/CRAC units, chilled water systems, economization strategies, and thermal management., • Proven ability to work onsite during construction, commissioning, and turnover phases., • Proficiency with engineering tools such as AutoCAD, Revit, CFD modeling, or similar platforms., • Strong communication skills and the ability to lead multidisciplinary teams.

Job Title: Fluidics Engineer/Mechanical Design Engineer Duration: 18+ Months Contract with possible extension Location: Atlanta, GA Role Summary Seeking a Fluidics Engineer with strong hands-on lab testing experience to design and develop fluidic and thermal systems for foodservice/beverage equipmen

Title - Mechanical Engineer (Thermal & Fluid) Duration: 18 months MUST have testing and lab testing experience. Job Description We are seeking a Fluidics Engineer III to contribute to the design and development of fluidic systems for foodservice and beverage equipment. This role focuses on fluid control and thermal management and requires the ability to collaborate effectively across organizational boundaries. You will support the development of world class products, and perform assessment and launch activities within a structured stage gate process. Key Responsibilities • Develop and perform tests on components and systems to investigate issues in hardware, control systems or software., • Support quality and reliability efforts, including DFMEA, test planning, instrumentation, Design of Experiments and data analysis., • Collaborate cross functionally with software, electrical, manufacturing, and non technical teams., • Design and develop mechanical systems with emphasis on fluidics and thermal performance., • Gather user requirements, develop system level specifications, and ensure product designs meet performance, reliability, and manufacturability targets., • Lead or participate in structured problem solving using 8D, A3, or DMAIC methodologies., • Create and maintain 3D models and engineering drawings using CREO, and manage engineering changes via Windchill.

Job Title: Fluidics Engineering Location: Atlanta, GA Pay rate: $40/hr.W2 Duration: 6 Months with possible extension Job Description: We are seeking a Fluidics Engineer III to contribute to the design and development of fluidic systems for foodservice and beverage equipment. This role focuses on fluid control and thermal management and requires the ability to collaborate effectively across organizational boundaries. You will support the development of world class products and perform assessment and launch activities within a structured stage gate process. Key Responsibilities • Develop and perform tests on components and systems to investigate issues in hardware, control systems or software., • Support quality and reliability efforts, including DFMEA, test planning, instrumentation, Design of Experiments and data analysis., • Collaborate cross functionally with software, electrical, manufacturing, and nontechnical teams., • Design and develop mechanical systems with emphasis on fluidics and thermal performance., • Gather user requirements, develop system level specifications, and ensure product designs meet performance, reliability, and manufacturability targets., • Lead or participate in structured problem solving using 8D, A3, or DMAIC methodologies., • Create and maintain 3D models and engineering drawings using CREO ,and manage engineering changes via Windchill. Required Qualifications • Bachelor's degree from an ABET accredited program in one of the following fields:, • Mechanical Engineering (BSME, BSMET), • Aerospace Engineering (BSAeroE), • Biomedical Engineering (BS Biomedical Eng), • Mechatronics Engineering (BS Mechatronics Eng) Strong foundation in: • Thermodynamics, • Fluid dynamics, • Electromechanical systems, • Laboratory testing, • Proficiency in test reports, technical communication and cross functional collaboration., • Competence in quality engineering principles and design for reliability practices. Preferred Qualifications • Master's degree in mechanical engineering (MSME) or Aerospace Engineering (MSAeroE)., • Experience with:, • Embedded software and electronics, • MATLAB, Python and/or LabView, • Familiarity with stage gate product development methodologies.

Onsite 5 days a week - 40 hours a week MUST have testing and lab testing experience. Job Description We are seeking a Fluidics Engineer III to contribute to the design and development of fluidic systems for foodservice and beverage equipment. This role focuses on fluid control and thermal management and requires the ability to collaborate effectively across organizational boundaries. You will support the development of world class products and perform assessment and launch activities within a structured stage gate process. Key Responsibilities • Develop and perform tests on components and systems to investigate issues in hardware, control systems or software., • Support quality and reliability efforts, including DFMEA, test planning, instrumentation, Design of Experiments and data analysis., • Collaborate cross functionally with software, electrical, manufacturing, and non-technical teams., • Design and develop mechanical systems with emphasis on fluidics and thermal performance., • Gather user requirements, develop system level specifications, and ensure product designs meet performance, reliability, and manufacturability targets., • Lead or participate in structured problem solving using 8D, A3, or DMAIC methodologies., • Create and maintain 3D models and engineering drawings using CREO and manage engineering changes via Windchill. Required Qualifications • Bachelor’s degree from an ABET accredited program in one of the following fields: o Mechanical Engineering (BSME, BSMET) o Aerospace Engineering (BSAeroE) o Biomedical Engineering (BS Biomedical Eng) o Mechatronics Engineering (BS Mechatronics Eng) • Strong foundation in: o Thermodynamics o Fluid dynamics o Electromechanical systems o Laboratory testing • Proficiency in test reports, technical communication and cross functional collaboration., • Competence in quality engineering principles and design for reliability practices. Preferred Qualifications • Master’s degree in mechanical engineering (MSME) or Aerospace Engineering (MSAeroE)., • Experience with: o Embedded software and electronics o Matlab, Python and/or LabView • Familiarity with stage gate product development methodologies.

Thanks for your interest in joining our team! Our Opportunity We are currently seeking a Manager/Managing Engineer with expertise in Mechanical Plant Systems Design, EPC Technical Services, Maintenance, and Commissioning, as well as Combustion Equipment for our Thermal Sciences Practice in Warrenvi

Job Description Senior Mechanical Commissioning Engineer – Liquid Cooling Systems – Atlanta, GA This opportunity is with a Leader in Critical Facilities Assessment and Commissioning Services in the U.S., supporting complex mechanical infrastructure for Enterprise, Colocation, and Hyperscale Data Centers. This firm delivers commissioning, consulting, and project management services with a focus on reliability, energy efficiency, and sustainability. This role is ideal for candidates seeking a career-growth-minded position with cutting-edge technology, high-impact projects, and competitive compensation and benefits. We are seeking a Senior Mechanical Commissioning Engineer with specialized experience in liquid cooling systems, process piping, and water treatment technologies. This position will play a critical role in the commissioning and validation of mechanical systems within mission-critical facilities, ensuring these environments perform to the highest standards in uptime and efficiency. Responsibilities: • Execute Level 1–5 commissioning for mission-critical environments, ensuring thorough testing, verification, and documentation, • Commission advanced liquid cooling systems, including chillers, CRAC/CRAH units, water-cooled technologies, and process piping systems, • Apply a deep understanding of cooling technologies, water treatment, and HVAC systems in data centers or similar high-stakes environments, • Conduct equipment pre-start-up and start-up procedures, develop SOPs and MOPs, and complete comprehensive commissioning documentation, • Prepare and execute commissioning test procedures and functional tests for all major MEP systems, • Develop and maintain commissioning logs, equipment checklists, and issue tracking tools, • Write detailed commissioning reports, including operational recommendations, functional testing checklists, and deficiency lists, • Review project documents including design drawings, submittals, and specifications, providing feedback to ensure design intent is met, • Interface with clients, vendors, contractors, and project stakeholders, acting as the commissioning lead on-site, • Assist with field troubleshooting, confirm results of test reports, and work with QA/QC teams to meet project goals, • Support integrated system testing and load bank testing, • 8–13 years of experience in mechanical/HVAC commissioning, with a strong emphasis on liquid cooling systems and process piping, • Proven commissioning experience in mission-critical industries such as data centers, pharmaceuticals, semiconductors, or other industrial environments, • Bachelor's degree in Mechanical Engineering preferred, • PE or EIT license a strong plus, • LEED Accreditation is a plus, • Experience with ASHRAE standards, especially ASHRAE T.C. 9.9, is highly desirable, • Advanced understanding of water-cooled systems, chilled water loops, water treatment processes, and thermal system dynamics, • Strong technical writing and communication skills—must be able to generate thorough, professional documentation, • Familiarity with Microsoft Office Suite, including Word, Excel, and Project, • Willingness to travel to project sites as needed After applying, if you have further questions, you may call 973-895-5200 and ask for Iggy. You can also submit via our career portal and take a look at other Critical Facility openings we are working on at, If this job is not for you, feel free to forward this along. WE PAY FOR REFERRALS!! Company offers competitive salaries and benefits package including medical insurance, a 401(k) plan EOE/AA Employer M/F/D/V Pkaza LLC is a third-party employment firm. All fees assessed by Pkaza LLC will be paid by our employer that we represent and not by the candidate

Job Description Wiley|Wilson, a 100% employee-owned architecture and engineering firm, is seeking a highly experienced Senior Mechanical Engineer specializing in district utilities to join our team in Atlanta, GA. We are looking for a highly motivated individual to play a pivotal role in expanding our well-established and growing district energy portfolio, continuing to serve both longstanding clients and new partnerships. Position Overview: As a Senior Mechanical Engineer with a focus in district heating and cooling utilities, you will provide technical leadership in the planning, design, analysis, and implementation of district utility projects. You will serve as a key technical expert, focusing on solving complex engineering challenges, overseeing designs, and ensuring the performance and reliability of utility systems for our clients. You will be involved in projects designing central plants and utility distribution systems. This role will involve in-depth technical work, collaboration with interdisciplinary teams, and mentoring junior engineers, all while contributing to the development of sustainable, innovative, efficient, and reliable district heating and cooling solutions. Key Responsibilities: • Lead the planning and design of district thermal utility systems such as heating water, chilled water, and steam., • Support business development efforts in the district utility market., • Conduct detailed engineering analysis, perform life cycle cost analysis (LCCA), and troubleshoot complex design challenges., • Collaborate with interdisciplinary teams to integrate mechanical systems into broader infrastructure projects., • Provide technical guidance and mentorship to junior engineers., • Support field investigations and system assessments to ensure designs meet real-world conditions and client requirements., • Participate in design reviews to ensure high standards of quality, innovation, and performance., • Minimum of 10 years of specialized experience with district thermal utility systems, including generation and distribution systems. Desired experience includes planning, analysis, and design., • Professional Engineer (PE) license., • Bachelor's degree in Mechanical Engineering from an ABET-accredited program., • Strong leadership and project management skills., • Master Planning experience, • Higher Education design experience, • Federal Government design experience, • Geothermal / ambient loop design experience Furthermore, we prioritize inclusivity with benefits such as 80 hours of parental leave for the birth of a child or newly adopted child, a hybrid work schedule to accommodate various needs, and for roles requiring travel, we ensure accommodations for individuals with disabilities. Why Wiley|Wilson? Wiley|Wilson is a full-service architecture-engineering firm, specializing in creating innovative and functional design solutions for our government, institutional, and private-sector clients around the world. Our diverse mix of projects, generous benefits, and focus on professional growth provides a truly unique opportunity for you to elevate your career. As a 100-percent employee-owned company, our 190+ employees share a stake in our success through an Employee Stock Ownership Plan (ESOP). The ownership model, coupled with our focus on service and engagement, creates a distinct company culture. Wiley|Wilson has offices in Alexandria, Lynchburg, Richmond, VA; Raleigh, NC; and Atlanta, GA. Other: • EOE/AAP, Disability/Covered veteran, Drug Free Workplace, • AT604 Senior Mechanical Engineer, District Utilities, • Atlanta, GA, District Utilities, District Energy, Steam Systems, Hot Water Systems, Chilled Water Systems, Mechanical Engineering, PE License, Infrastructure Design, System Optimization, Field Investigations, Technical Leadership, Engineering Analysis, Utility Networks, Decarbonization, Sustainable Energy Solutions, Geothermal Job Posted by ApplicantPro

Job DescriptionHermeus is a high-speed aircraft manufacturer focused on the rapid design, build, and test of high-Mach and hypersonic aircraft for the national interest. Working directly with the Department of Defense, Hermeus delivers capabilities that will ensure that our nation, and our allies, maintain an asymmetric advantage over any and all potential adversaries. We are seeking a Mid-Career Mechanical Engineer to support the design, build, and test of next-generation aircraft aerostructures, including fuselage, empennage, control surfaces, and landing gear systems. This role is hands-on and execution-oriented, with responsibility for taking hardware from concept through detailed design, fabrication support, and test validation.Responsibilities • Own R&D-focused structural design and development supporting vehicle subsystems such as hydraulics, fuel systems, propulsion, and avionics, with an emphasis on rapid prototyping and iteration, • Perform first-principles structural and thermal analyses using hand calculations and FEA to inform early design decisions and experimental validation, • Execute trade studies across mechanical, fluid, and avionics subsystems focused on performance, mass efficiency, and technical risk reduction, • Design, build, and test prototype hardware, owning development from concept through fabrication, integration, and experimental validation, • Collaborate closely with manufacturing and test teams to transition prototype concepts toward scalable, production-aware designs, • Support hands-on integration, troubleshooting, and test campaigns to quickly iterate and mature hardware, • Present technical findings in internal design reviews and contribute to cross-functional and supplier/customer technical discussions Basic Qualifications, • Bachelor’s degree in mechanical engineering, aerospace engineering, or physics, • 2+ years of experience in mechanical design, analysis, and experimental testing (internships and significant student project experience qualify), preferably in an R&D or prototype environment Preferred Skills, • Strong hands-on experience with rapid prototyping, hardware build, and mechanical assembly of complex systems, • Solid foundation in engineering fundamentals including statics, dynamics, heat transfer, fluid mechanics, and vibration, • Proficiency in CAD (NX preferred), FEA (Ansys preferred), and PLM tools (Teamcenter preferred), • Experience designing and testing hardware in early development environments, with awareness of design-for-manufacturing and production considerations, • Familiarity with mechanical testing under vibration, fatigue, shock, vacuum, and thermal loads, • Demonstrated ability to collaborate across disciplines (fluids, avionics, manufacturing) to deliver integrated experimental systems, • Proven ownership of technically complex projects from concept through test and iteration Additional Requirements, • Willingness to work extended hours and weekends as needed to support critical development milestones We may use artificial intelligence (AI) tools to support parts of the hiring process, such as reviewing applications, analyzing resumes, or assessing responses. These tools assist our recruitment team but do not replace human judgment. Final hiring decisions are ultimately made by humans. If you would like more information about how your data is processed, please contact us.

Job Description Are you passionate about solving complex thermal challenges in advanced semiconductor technologies? At Falcomm, we are transforming innovative semiconductor research into real-world solutions through high-performance, energy-efficient RF power amplifier technologies. Our mission is to deliver next-generation wireless solutions that maximize performance while improving efficiency and reliability. Falcomm is seeking an RFIC Thermal Engineer to analyze, model, and optimize thermal performance in RF integrated circuits and semiconductor packages. This role will focus on understanding heat dissipation, thermal reliability, and thermal management strategies for high-power RF devices. The position requires collaboration with RFIC designers, packaging engineers, and system teams to ensure devices operate reliably under demanding performance conditions. Responsibilities: • Develop thermal models for RFIC devices, packages, and modules to evaluate heat dissipation and temperature distribution., • Perform thermal simulations and analysis to support design optimization and reliability improvements., • Collaborate with RFIC design and packaging teams to develop thermal management strategies., • Evaluate thermal performance across different packaging technologies and materials., • Support silicon validation and characterization related to thermal performance., • Analyze thermal failure mechanisms and recommend design or process improvements., • Document analysis methods, results, and recommendations. Requirements • Bachelor’s degree in Electrical Engineering, Computer Engineering, Computer Science, or a related discipline., • 3-5 years experience with thermal analysis, modeling, or simulation in semiconductor or electronic systems., • Strong understanding of heat transfer principles and thermal management techniques for RFICs and MMICs., • Must be willing to work full-time, onsite, in Atlanta, GA. Preferred Skills: • Experience with thermal simulation tools such as ANSYS, COMSOL, or similar platforms., • Familiarity with semiconductor packaging technologies and thermal interface materials., • Experience analyzing high-power devices such as RF amplifiers or high-frequency ICs., • Strong analytical and problem-solving skills with the ability to collaborate across engineering teams. Benefits • Competitive Salary and Equity Package, • Comprehensive Health, Dental, and Vision Insurance, • 401(k) Retirement Plan, • Paid Time Off (PTO) and Sick Leave Disclosure: • Falcomm is an Equal Opportunity Employer; employment with Falcomm is governed on the basis of merit, competence and qualifications and will not be influenced in any manner by race, color, religion, gender, national origin/ethnicity, veteran status, disability status, age, sexual orientation, gender identity, marital status, mental or physical disability or any other legally protected status., • Applicants wishing to view a copy of Falcomm’s Affirmative Action Plan for veterans and individuals with disabilities, or applicants requiring reasonable accommodation to the application/interview process should notify Falcomm., • To conform to U.S. Government export regulations, including the International Traffic in Arms Regulations (ITAR) you must be a U.S. citizen, lawful permanent resident of the U.S., protected individual as defined by 8 U.S.C. 1324b(a)(3), or eligible to obtain the required authorizations from the U.S. Department of State.

Job Description McKenney’s, Inc. is seeking a licensed Structural Engineer to support our mechanical and plumbing operations. This role is embedded directly with project teams responsible for getting work built—requiring a strong appreciation for schedules, constructability, prioritization, and customer service. The successful candidate will apply sound engineering judgment to deliver safe, code‑compliant, and efficient structural solutions that enable successful installation of mechanical and plumbing systems. JOB SUMMARY The Structural Engineer (PE) will provide structural engineering services in support of mechanical and plumbing construction projects. This includes the design and review of pump skids, piping skids, equipment supports, pipe supports, seismic restraints, and wind restraint systems for mechanical equipment. The role works closely with internal operations teams, virtual construction, fabrication, and field personnel to ensure designs are practical, constructible, timely, and aligned with project schedules and customer commitments. DUTIES & ESSENTIAL JOB FUNCTIONS • Design and seal structural calculations and details for pump skids, piping skids, and packaged mechanical systems., • Engineer pipe support systems including gravity, lateral, seismic, and thermal considerations., • Design seismic restraint systems for ductwork, piping, plumbing, and mechanical equipment in accordance with applicable codes and standards., • Perform wind load analysis and design wind restraint systems for rooftop and exterior mechanical equipment., • Review delegated design submittals and shop drawings related to structural supports and restraints., • Ensure compliance with applicable building codes, seismic requirements, wind criteria, and referenced standards (IBC, ASCE 7, SMACNA, MSS, etc.)., • Provide timely engineering support to operations teams to maintain construction schedules and address field conditions., • Participate in coordination meetings with internal teams, general contractors, and other trades as required., • Perform site visits to validate existing conditions, review installations, and support issue resolution., • Clearly communicate engineering intent to non‑structural audiences including project managers, superintendents, fabricators, and installers., • Bachelor’s degree in Structural Engineering, Civil Engineering, or similar., • Registered Professional Engineer., • Minimum of 7–10 years of relevant structural engineering experience., • Experience supporting construction‑phase engineering within a design‑build or contractor‑led environment., • Working knowledge of mechanical and plumbing systems and how they are fabricated and installed., • Familiarity with seismic and wind restraint design for MEP systems., • Ability to work effectively in a fast‑paced environment with competing priorities., • Strong understanding of structural engineering principles as applied to MEP systems., • Excellent written and verbal communication skills., • Ability to translate engineering requirements into clear, practical direction for construction teams., • High level of organization with the ability to manage multiple priorities simultaneously., • Strong sense of urgency and accountability to schedules and commitments., • Customer‑focused mindset with appreciation for internal operations needs., • Professional demeanor and commitment to McKenney’s values and standards., • Self‑starter capable of working independently and collaboratively. McKenney’s is an Equal Opportunity Employer committed to workforce diversity. Qualified candidates will receive consideration without regard to age, color, religion, sexual orientation, disability, national origin, or gender identity. McKenney’s is a smoke-free and drug-free workplace. Powered by JazzHR eZwo79fNmL

Job Description Are you passionate about pioneering innovations in the semiconductor industry? At Falcomm, we are on a mission to transform semiconductor technologies into tangible, real-world solutions. We specialize in crafting energy-efficient power amplifier products that set the standard for excellence in performance. As an RF Power Amplifier Design Engineer, you will join our dedicated team of experts who are committed to pushing the boundaries of semiconductor technology. Your role will be instrumental in shaping products that not only meet but exceed our customers' expectations. We are looking for an individual who thrives in a fast-paced environment, is eager to contribute to cutting-edge projects, and is motivated by the challenge of creating real-world applications of semiconductor innovation. If you have a creative mindset and a strong background in RFIC/MMIC design, we invite you to come and make your mark at Falcomm, where innovation meets sustainability in energy-efficient solutions. Become part of a dynamic team where your skills and ideas can truly elevate the field of semiconductors and help us fulfill our vision of delivering unmatched power amplifier technologies. Responsibilities • Design and develop RF power amplifiers for applications such as SATCOM, Wi-Fi, and cellular., • Collaborate with cross-functional teams to integrate RF power amplifier designs into larger SoC systems., • Create prototype and test RF power amplifier designs to ensure reliability and performance under real-world conditions., • Present detailed design reviews covering IC, package, electromagnetic (EM), simulation results, measurement data, and thermal considerations; all related to continuous improvement of RF design processes., • Stay on top of industry trends and advancements in semiconductor technology., • Masters or PhD in Electrical Engineering or a related field; with an educational emphasis on RF/microwave integrated circuits design., • 3+ years of experience in RF power amplifier design and development up to 60GHz., • PA tapeout experience using SOI or SiGe technologies., • Strong knowledge of differential and single-ended power amplifiers including modes of operation, matching, bias, and architecture considerations., • Strong circuit design skills, experience with IC layout, PEX extraction, performing electromigration analysis, and simulation of both linear and non-linear behavior of RF PAs to meet performance targets such as gain, linearity, power, and bandwidth., • Strong EM knowledge of passive components including couplers, baluns, and matching networks., • Proficiency in simulation and design tools such as Cadence Virtuoso, Keysight ADS, Keysight SystemVue, Siemens Calibre, etc., • Experience with EM simulators such as HFSS, Momentum, and EMX., • Knowledge of RF transceiver architectures, digital communication systems, spread spectrum, single and multi-carrier techniques and modulation types such as QPSK, APSK and QAM, • Must be willing to work on-site full-time at our office in Atlanta, GA. Preferred Qualifications • RF/microwave design experience in the Ku, K, Ka, Q, or V-band frequency ranges., • Familiarity with radio related test equipment such as spectrum analyzers, vector signal analyzers, vector signal generator, network analyzers, and hands-on experience in a lab with equipment for RF testing and measurement., • Competitive Salary and Equity Package, • Comprehensive Health, Dental, and Vision Insurance, • 401(k) Retirement Plan, • Paid Time Off (PTO) and Sick Leave DISCLOSURE • Falcomm is an Equal Opportunity Employer; employment with Falcomm is governed on the basis of merit, competence and qualifications and will not be influenced in any manner by race, color, religion, gender, national origin/ethnicity, veteran status, disability status, age, sexual orientation, gender identity, marital status, mental or physical disability or any other legally protected status., • Applicants wishing to view a copy of Falcomm’s Affirmative Action Plan for veterans and individuals with disabilities, or applicants requiring reasonable accommodation to the application/interview process should notify Falcomm., • To conform to U.S. Government export regulations, including the International Traffic in Arms Regulations (ITAR) you must be a U.S. citizen, lawful permanent resident of the U.S., protected individual as defined by 8 U.S.C. 1324b(a)(3), or eligible to obtain the required authorizations from the U.S. Department of State.

Job Description Sager Electronics is looking for a Power Sales Engineer (PSE) to drive growth within the assigned region by expanding existing customer relationships and developing new business opportunities in power, thermal and battery solutions. This role is ideal for a motivated engineer who is technically savvy and who thrives at the intersection of engineering and business development. Territory: Florida, North Carolina, South Carolina, Tennessee, Missouri, Alabama, Georgia What You’ll Do As a Power Sales Engineer, you will play a critical role in identifying, developing, and securing new power supply opportunities: • Partner with customers from design through production to win new business, • Support qualification efforts for Power Systems products, including inbound leads, • Collaborate with the local sales team on design opportunities and application solutions, • Deliver product updates and emerging technology insights to customers and internal teams, • Capture and manage design registrations and design wins, • Build strong relationships with local rep groups and manufacturer representative partners, • Share market intelligence, customer feedback, and industry trends with leadership, • Participate in technical training with suppliers and service centers, • Contribute to customer planning and regional growth strategies, • Ensure an exceptional customer experience through consistent follow-through, • Manage territory and time effectively to maximize impact, • Complete administrative reporting and maintain CRM data, • Represent the company with professionalism, integrity, and accountability Education & Experience • Bachelor’s degree in engineering, (or equivalent experience), • Minimum 2+ years of experience selling power solutions, • Strong understanding of the power supply market and electronics industry, • Ability to engage stakeholders, • Self-starter who thrives in a fast-paced, results-driven environment, • Excellent communication, negotiation, and listening skills, • Strong organizational and territory management abilities, • Ability to quickly become a product expert across multiple suppliers, • Annual Base Salary Range: $63,375-$105,950 Why Join Us? • Opportunity to work with leading power technology suppliers, • High-impact role with strong visibility and growth potential, • Medical, dental, and vision insurance to keep you and your family healthy., • 401(k)/Roth plan with matching, ensuring your financial future is secure., • Healthcare Savings Accounts for added flexibility in managing medical expenses., • Educational Assistance (Tuition Reimbursement) to support your ongoing learning and development., • Continuous training opportunities throughout your employment, empowering you to grow both personally and professionally., • A strong commitment to giving back to our communities through philanthropic opportunities and volunteer hours. To perform the position, you must be a U.S. Person as defined by ITAR. ITAR defines a U.S. Person as a U.S. Citizen, U.S. Permanent Resident (i.e., ‘Green Card Holder’), Political Asylee, or Refugee. We are an Equal Opportunity Employer, and we support protected veterans and individuals with disabilities through our affirmative action program.

Job Description Are you passionate about ensuring the reliability and performance of advanced semiconductor technologies? At Falcomm, we are transforming innovative semiconductor research into real-world solutions through high-performance, energy-efficient RF power amplifier technologies. Our mission is to deliver reliable, high-efficiency wireless solutions that enable the next generation of communication systems. Falcomm is seeking an RFIC Reliability Engineer to lead reliability analysis and qualification activities for RF integrated circuits and semiconductor products. This role will focus on evaluating device reliability, identifying failure mechanisms, and developing testing methodologies to ensure long-term performance and robustness of RFIC technologies. The position requires close collaboration with RFIC designers, process engineers, packaging teams, and manufacturing partners to support product development from early design through production. Responsibilities: • Conducting reliability modeling for all RFIC designs using validated device degradation models (e.g., HCI, BTI, EM)., • Analyze device degradation mechanisms and perform failure analysis to identify root causes of reliability issues., • Define and execute reliability qualification plans including stress testing, accelerated life testing, and environmental testing., • Develop and implement reliability testing strategies for RFIC devices and semiconductor products., • Collaborate with RFIC design, packaging, and manufacturing teams to improve product reliability and robustness., • Review design and process changes to assess potential reliability impacts., • Support silicon bring-up, characterization, and long-term reliability validation., • Document reliability methodologies, test results, and qualification reports. Requirements • Bachelor’s degree in Electrical Engineering, Computer Engineering, Computer Science, or a related discipline., • 3-5 years reliability engineering experience., • Strong understanding of semiconductor device physics and reliability mechanisms., • Must be willing to work full-time, onsite, in Atlanta, GA. Preferred Skills: • Experience with RFIC technologies such as SOI and GaN., • Experience using tools such as Cadence RelXpert and Voltus-Fi for device reliability and peak metal temperatures, • Knowledge of semiconductor reliability testing methods including HTOL, HAST, electromigration, and thermal cycling., • Experience with failure analysis techniques and reliability modeling., • Strong analytical and communication skills with the ability to work across engineering teams. Benefits • Competitive Salary and Equity Package, • Comprehensive Health, Dental, and Vision Insurance, • 401(k) Retirement Plan, • Paid Time Off (PTO) and Sick Leave Disclosure: • Falcomm is an Equal Opportunity Employer; employment with Falcomm is governed on the basis of merit, competence and qualifications and will not be influenced in any manner by race, color, religion, gender, national origin/ethnicity, veteran status, disability status, age, sexual orientation, gender identity, marital status, mental or physical disability or any other legally protected status., • Applicants wishing to view a copy of Falcomm’s Affirmative Action Plan for veterans and individuals with disabilities, or applicants requiring reasonable accommodation to the application/interview process should notify Falcomm., • To conform to U.S. Government export regulations, including the International Traffic in Arms Regulations (ITAR) you must be a U.S. citizen, lawful permanent resident of the U.S., protected individual as defined by 8 U.S.C. 1324b(a)(3), or eligible to obtain the required authorizations from the U.S. Department of State.

Job DescriptionWho is Flock? Flock Safety is the leading safety technology platform, helping communities thrive by taking a proactive approach to crime prevention and security. Our hardware and software suite connects cities, law enforcement, businesses, schools, and neighborhoods in a nationwide public-private safety network. Trusted by over 5,000 communities, 4,500 law enforcement agencies, and 1,000 businesses, Flock delivers real-time intelligence while prioritizing privacy and responsible innovation. We’re a high-performance, low-ego team driven by urgency, collaboration, and bold thinking. Working at Flock means tackling big challenges, moving fast, and continuously improving. It’s intense but deeply rewarding for those who want to make an impact. With nearly $700M in venture funding and a $7.5B valuation, we’re scaling intentionally and seeking top talent to help build the impossible. If you value teamwork, ownership, and solving tough problems, Flock could be the place for you. The Opportunity Flock Safety is looking for a Senior Mechanical Engineer to join our Aviation Engineering team. As we expand our Drone as First Responder (DFR) vertical, this role is critical to the execution and refinement of our small unmanned aerial systems (UAS) as they move into high-volume production. You will join the Airframes division to own the mechanical design and iteration of our Alpha quadcopter platform. This is a hands-on, high-impact role where you will bridge the gap between concept and the manufacturing floor. From solving real-world vibration issues to ensuring seamless integration with docks and payloads, you will be the technical lead for making our flight hardware production-ready. The Skillset We’re looking for people with: * Bachelor’s degree in Mechanical Engineering, Aerospace Engineering, Mechatronics, or a related technical discipline. * 5+ years of professional experience in mechanical design (Aerospace, Robotics, or EV industries preferred). * You should be highly comfortable with complex assemblies, Solidworks PDM, and applying GD&T standards for production parts. * Proven experience designing for scale in assemblies with 200+ parts. * Hands-on experience designing for plastic injection molding (draft, wall thickness, gate placement) and sheet metal fabrication. * Experience developing and running mechanical test plans (vibration, thermal, drop tests) and using that data to iterate on designs. * Understanding of vibration damping and shock isolation for sensitive electronics, flight controllers, or gimbals. * You thrive in 100% onsite, fast-paced environments and are willing to jump on the manufacturing floor to solve a problem in real-time. 90 Days at Flock The First 30 Days * Complete technical onboarding and gain a deep understanding of the Alpha aircraft’s current mechanical architecture. * Demonstrate proficiency in our Solidworks PDM workflow and begin contributing to the release of assembly drawings for production. * Build relationships with the Operations team on the manufacturing floor to understand current assembly bottlenecks. The First 60 Days * Own the design of at least one major sub-assembly or payload integration project. * Execute DFM/DFA feedback cycles with vendors to simplify current parts and reduce assembly cycle time. * Work cross-functionally with the Electrical Engineering and Autonomy teams to ensure mechanical-thermal constraints are met. 90 Days & Beyond * Become the Subject Matter Expert (SME) for the Alpha airframe’s mechanical reliability. * Drive the transition of designs from "prototype" to "mass production," ensuring every design change is validated through rigorous testing. * Mentor junior engineers and technicians on CAD best practices and assembly standards. Salary & Equity In this role, you’ll receive a starting salary between $130,000-$160,000 as well as Flock Safety Stock Options. Work Environment & Location This is a full-time, onsite role based at our manufacturing and engineering facility in Atlanta, GA. Because this position is deeply integrated with our production line and flight testing operations, you will be expected to be onsite Monday-Friday. We believe that this engineer will be most successful when they can walk over to the assembly line, collaborate face-to-face with our airframes team, and see designs take flight in real-time. If you thrive in a high-energy, "hands-on" environment and are excited to be at the heart of where our technology is built, you’ll fit right in. The Interview Process We want our interview process to be a true reflection of our culture: transparent and collaborative. Throughout the interview process, your recruiter will guide you through the next steps and ensure you feel prepared every step of the way. To check out our interview stages and how you should prepare visit experiences on our careers page. The Perks 🌴Flexible PTO: We seriously mean it, plus 11 company holidays. ⚕️Fully-paid health benefits plan for employees: including Medical, Dental, and Vision and an HSA match. 👪Family Leave: All employees receive 12 weeks of 100% paid parental leave. Birthing parents are eligible for an additional 6-8 weeks of physical recovery time. 🍼Fertility & Family Benefits: We have partnered with Maven, a complete digital health benefit for starting and raising a family. In 2025, Flock will provide a $ 50,000-lifetime maximum benefit related to eligible adoption, surrogacy, or fertility expenses. 💖Caregiver Support: We have partnered with Cariloop to provide our employees with caregiver support 💸Carta Tax Advisor: Employees receive 1:1 sessions with Equity Tax Advisors who can address individual grants, model tax scenarios, and answer general questions. 💚ERGs: We want all employees to thrive and feel like they belong at Flock. We offer three ERGs today - Women of Flock, Flock Proud, and Melanin Motion. If you are interested in talking to a representative from one of these, please let your recruiter know. 💻WFH Stipend: $150 per month to cover the costs of working from home. 📚Productivity Stipend: $250 per year to use on Audible, Calm, Masterclass, Duolingo, Grammarly and so much more. 🏠Home Office Stipend: A one-time $750 to help you create your dream office. 🐾Pet Insurance: We’ve partnered with Pumpkin to provide insurance for our employee’s fur babies. Flock is an equal opportunity employer. We celebrate diverse backgrounds and thoughts and welcome everyone to apply for employment with us. We are committed to fostering an environment that is inclusive, transparent, and collaborative. Mutual respect is central to how Flock operates, and we believe the best solutions come from diverse perspectives, experiences, and skills. We embrace our differences and know that we are stronger working together. If you need assistance or an accommodation due to a disability, please email us at . This information will be treated as confidential and used only to determine an appropriate accommodation for the interview process. At Flock Safety, we compensate our employees fairly for their work. Base salary is determined by job-related experience, education/training, as well as market indicators. The range above is representative of base salary only and does not include equity, sales bonus plans (when applicable) and benefits. This range may be modified in the future. This job posting may span more than one career level. Flock Safety is aware of fraudulent individuals and agencies falsely claiming to represent our company. All legitimate communication from Flock Safety will come from an email address ending in @flocksafety.com. We do not make job offers through messaging apps, social platforms, or unauthorized third parties, and we will never request payment or sensitive personal information during the hiring process. If you encounter suspicious outreach related to a Flock Safety role, please report it to Compensation Range: $130K - $160K

Job DescriptionWho is Flock? Flock Safety is the leading safety technology platform, helping communities thrive by taking a proactive approach to crime prevention and security. Our hardware and software suite connects cities, law enforcement, businesses, schools, and neighborhoods in a nationwide public-private safety network. Trusted by over 5,000 communities, 4,500 law enforcement agencies, and 1,000 businesses, Flock delivers real-time intelligence while prioritizing privacy and responsible innovation. We’re a high-performance, low-ego team driven by urgency, collaboration, and bold thinking. Working at Flock means tackling big challenges, moving fast, and continuously improving. It’s intense but deeply rewarding for those who want to make an impact. With nearly $700M in venture funding and a $7.5B valuation, we’re scaling intentionally and seeking top talent to help build the impossible. If you value teamwork, ownership, and solving tough problems, Flock could be the place for you. The Opportunity Flock Safety is looking for a Mechanical Engineer to join our Aviation Engineering team. As we expand our Drone as First Responder (DFR) vertical, this role will be pivotal in bringing the design expertise needed to manufacture and deploy novel small unmanned aerial systems (UAS) at scale. You will work within the Airframes division to help develop custom mechanical components for our Alpha quadcopter platform. This is a high-impact role where you will bridge the gap between initial industrial design and scalable manufacturing, ensuring our drones are rugged, reliable, and capable of supporting critical public safety missions. From vibration mitigation and gimbal design to cross-functional integration with docks and payloads, you will be at the heart of our hardware innovation. The Skillset We’re looking for people with: * Bachelor’s degree in Mechanical Engineering, Aerospace Engineering, Mechatronics, or a related technical discipline. * Proven track record in mechanical design, ideally within the aerospace or robotics industry. * Expert-level proficiency in Solidworks and experience with Solidworks PDM and GD&T standards. * Background in designing for manufacturing (DFM) in complex, multi-subsystem assemblies (200+ parts). * Experience designing for plastic injection molded manufacturing, including draft angles, wall thickness, and gate placement. * Experience running rigorous test plans and analyzing test data to iterate on mechanical designs. * Deep understanding of vibration damping and mitigation in high-frequency environments for flight controllers, gimbals, or sensitive electronics. * Experience in high-growth environments; you are flexible, act like a "first responder," and are willing to do what it takes to get the job done. * Comfortable collaborating with remote cross-functional teams across time zones. The ideal candidate will have: * Experience with Arena integration for PLM. * Experience with quadcopter development (professional preferred, but high-level hobbyist experience is valued). * Experience with electronics packaging and managing thermal/mechanical constraints. Feeling uneasy that you haven’t ticked every box? That’s okay, we’ve felt that way too. Studies have shown women and minorities are less likely to apply unless they meet all qualifications. We encourage you to break the status quo and apply to roles that would make you excited to come to work every day. 90 Days at Flock We subscribe to 90-day plans and believe that good days lead to good weeks, which lead to good months. This serves as a preview of the 90-day plan you will receive if you were to be hired as a Mechanical Engineer at Flock Safety. The First 30 Days * Develop a comprehensive understanding of our current aircraft manufacturing process * Demonstrate a high-level understanding of quadcopter subsystems and complete all required technical and cultural onboarding. * Begin contributing to mechanical design by developing assembly drawings for production handoff. The First 60 Days * Work with Airframes peers and cross-functional groups to refine design philosophy * Manage relationships with teams to ensure seamless mechanical integration between the aircraft and its base station/sensors. 90 Days & Beyond * You will be fully confident in your ability to lead design efforts for our next-generation airframes while maintaining strict CAD and PDM standards. * Apply key learnings from your time on the manufacturing floor (working with Operations) to our production aircraft, ensuring our designs are optimized for scale and reliability. Salary & Equity In this role, you’ll receive a starting salary between $140,000-$190,000 as well as Flock Safety Stock Options. Work Environment & Location This is a full-time, onsite role based at our manufacturing and engineering facility in Atlanta, GA. Because this position is deeply integrated with our production line and flight testing operations, you will be expected to be onsite Monday-Friday. We believe that this engineer will be most successful when they can walk over to the assembly line, collaborate face-to-face with our airframes team, and see designs take flight in real-time. If you thrive in a high-energy, "hands-on" environment and are excited to be at the heart of where our technology is built, you’ll fit right in. The Interview Process We want our interview process to be a true reflection of our culture: transparent and collaborative. Throughout the interview process, your recruiter will guide you through the next steps and ensure you feel prepared every step of the way. To check out our interview stages and how you should prepare visit experiences on our careers page. The Perks 🌴Flexible PTO: We seriously mean it, plus 11 company holidays. ⚕️Fully-paid health benefits plan for employees: including Medical, Dental, and Vision and an HSA match. 👪Family Leave: All employees receive 12 weeks of 100% paid parental leave. Birthing parents are eligible for an additional 6-8 weeks of physical recovery time. 🍼Fertility & Family Benefits: We have partnered with Maven, a complete digital health benefit for starting and raising a family. In 2025, Flock will provide a $ 50,000-lifetime maximum benefit related to eligible adoption, surrogacy, or fertility expenses. 💖Caregiver Support: We have partnered with Cariloop to provide our employees with caregiver support 💸Carta Tax Advisor: Employees receive 1:1 sessions with Equity Tax Advisors who can address individual grants, model tax scenarios, and answer general questions. 💚ERGs: We want all employees to thrive and feel like they belong at Flock. We offer three ERGs today - Women of Flock, Flock Proud, and Melanin Motion. If you are interested in talking to a representative from one of these, please let your recruiter know. 💻WFH Stipend: $150 per month to cover the costs of working from home. 📚Productivity Stipend: $250 per year to use on Audible, Calm, Masterclass, Duolingo, Grammarly and so much more. 🏠Home Office Stipend: A one-time $750 to help you create your dream office. 🐾Pet Insurance: We’ve partnered with Pumpkin to provide insurance for our employee’s fur babies. Flock is an equal opportunity employer. We celebrate diverse backgrounds and thoughts and welcome everyone to apply for employment with us. We are committed to fostering an environment that is inclusive, transparent, and collaborative. Mutual respect is central to how Flock operates, and we believe the best solutions come from diverse perspectives, experiences, and skills. We embrace our differences and know that we are stronger working together. If you need assistance or an accommodation due to a disability, please email us at . This information will be treated as confidential and used only to determine an appropriate accommodation for the interview process. At Flock Safety, we compensate our employees fairly for their work. Base salary is determined by job-related experience, education/training, as well as market indicators. The range above is representative of base salary only and does not include equity, sales bonus plans (when applicable) and benefits. This range may be modified in the future. This job posting may span more than one career level. Flock Safety is aware of fraudulent individuals and agencies falsely claiming to represent our company. All legitimate communication from Flock Safety will come from an email address ending in @flocksafety.com. We do not make job offers through messaging apps, social platforms, or unauthorized third parties, and we will never request payment or sensitive personal information during the hiring process. If you encounter suspicious outreach related to a Flock Safety role, please report it to Compensation Range: $140K - $190K

Job DescriptionHermeus is a high-speed aircraft manufacturer focused on the rapid design, build, and test of high-Mach and hypersonic aircraft for the national interest. Working directly with the Department of Defense, Hermeus delivers capabilities that will ensure that our nation, and our allies, maintain an asymmetric advantage over any and all potential adversaries. We are looking for an RF systems engineer focused on identifying RF hardware requirements, creating system architectures, and building/testing/integrating the RF solutions – both on the aircraft and ground station. This position will require strong fundamentals, wide-breadth design experience, and efficient troubleshooting skills. You’ll be responsible for high-ownership technical delivery while working with a multi-disciplinary team of engineering, manufacturing, and quality professionals.Responsibilities: • Simulate/model RF hardware for communication systems and sensors/instruments., • Develop test concepts and test procedures for RF and Environmental testing, including far field and near field measurements (plus vibration, shock, thermal and thermal vacuum)., • Define hardware architecture and specifications for the RF system blocks, interfaces, and housing. Design, build and test microwave circuits and assemblies., • End-to-end design validation and testing of RF product performance. Lead and conduct troubleshooting or root cause hardware performance challenges., • Work with manufacturing and production teams on procuring and integrating quality RF module and antenna subsystems into our aircraft., • Perform data analysis of RF systems, generate documentation/slides and present results to team.Minimum Requirements:, • Bachelor's degree in Electrical Engineering or related discipline., • 4+ years of professional experience designing and testing electrical, antenna and/or RF hardware and systems., • Experience with RF/Antenna Systems in L/S/C/Ku and Ka-Band frequencies.Preferred Skills and Experience:, • Demonstrated experience working collaboratively in cross-functional teams., • Strong troubleshooting and problem diagnostic skills, • Understanding of electromagnetic propagation, impedance matching, Smith Chart, VSWR, P1dB, IIP3, NF, and etc., • Understanding of digital modulation such as QAM, BPSK, QPSK, and SOQPSK or similar., • Experience working with VNA, spectrum analyzers, RF power meters, and other relevant RF test equipment., • Experience with test equipment automation and scripting, • Strong hands-on skills including prototyping/soldering and the use of a full range of instrumentation including multimeters, oscilloscopes, current meters, etc, • Support ongoing regulatory filling including FCC, FAA, and AFTRCC., • Previous Experience on Integration and Test of an RF Systems (of any kind) with Radio as an integral part of RF Systems., • Master's degree with emphasis in Antenna, Electromagnetic theory and/or microwave circuits., • Experience using in HFSS (or similar antenna simulation tools)., • Familiarity with Antenna design, including types and tradeoffs., • EMI/EMC testing per MIL-STD-461., • Prior experience working on an airborne vehicle., • Experience in a startup or agile development environment., • Experience with Python or other scripting languages to aid automation, data analysis, etcAdditional Requirements: We may use artificial intelligence (AI) tools to support parts of the hiring process, such as reviewing applications, analyzing resumes, or assessing responses. These tools assist our recruitment team but do not replace human judgment. Final hiring decisions are ultimately made by humans. If you would like more information about how your data is processed, please contact us.

Job DescriptionWho is Flock? Flock Safety is the leading safety technology platform, helping communities thrive by taking a proactive approach to crime prevention and security. Our hardware and software suite connects cities, law enforcement, businesses, schools, and neighborhoods in a nationwide public-private safety network. Trusted by over 5,000 communities, 4,500 law enforcement agencies, and 1,000 businesses, Flock delivers real-time intelligence while prioritizing privacy and responsible innovation. We’re a high-performance, low-ego team driven by urgency, collaboration, and bold thinking. Working at Flock means tackling big challenges, moving fast, and continuously improving. It’s intense but deeply rewarding for those who want to make an impact. With nearly $700M in venture funding and a $7.5B valuation, we’re scaling intentionally and seeking top talent to help build the impossible. If you value teamwork, ownership, and solving tough problems, Flock could be the place for you. The Opportunity As Flock Safety expands its Drones as First Responder (DFR) initiative, we are seeking a UAS Hardware Validation Engineer to bridge the gap between mechanical design and real-world deployment. Your mission is to develop and execute the rigorous test plans that validate our structures and subsystems. You will own the "torture testing" of our aircraft—subjecting them to extreme environments and vibration profiles to ensure they meet the Performance Requirements Document (PRD). You are the feedback loop that tells the design team exactly why a component failed and how to iterate for mission-critical reliability. The Skillset * Validation Strategy: Proven ability to develop and execute comprehensive test plans for mechanical structures and high-performance aircraft subsystems. * Environmental & Stress Testing: Hands-on experience with Environmental testing (ingress, thermal extremes) and Vibration/Shock testing to identify resonance issues or structural fatigue. * Design Iteration: Ability to work side-by-side with Design and Systems teams to interpret test data and suggest hardware iterations that align with the PRD. * UAS Performance Analysis: A high-level understanding of quadcopter subsystems and how environmental factors impact flight performance. * Hardware Troubleshooting: Experience "turning wrenches"—you are comfortable with aircraft assembly/disassembly to diagnose failures post-test. * Tools: Proficiency with Solidworks (for design review) and Arena PLM. Familiarity with data acquisition tools for vibration and thermal monitoring. Your First 90 Days at Flock * The First 30 Days: Immerse yourself in aircraft design. Demonstrate a functional understanding of our quadcopter subsystems while supporting ongoing test execution and environmental setups. * The First 60 Days: Collaborate across teams to refine vibration and environmental test methodologies. You will produce your first formal written test reports that directly influence design iterations. * 90 Days & Beyond: Reach full autonomy. You will own the end-to-end validation lifecycle: writing the plan to match the PRD, executing the stress tests, and partnering with design engineers to harden the aircraft for the field. Salary & Equity In this role, you’ll receive a starting salary between $90,000-$150,000 as well as Flock Safety Stock Options. Work Environment & Location This is a full-time, onsite role based at our manufacturing and engineering facility in Atlanta, GA. Because this position is deeply integrated with our production line and flight testing operations, you will be expected to be onsite Monday-Friday. If you thrive in a high-energy, "hands-on" environment and are excited to be at the heart of where our technology is built, you’ll fit right in. The Interview Process We want our interview process to be a true reflection of our culture: transparent and collaborative. Throughout the interview process, your recruiter will guide you through the next steps and ensure you feel prepared every step of the way. To check out our interview stages and how you should prepare visit experiences on our careers page. The Perks 🌴Flexible PTO: We seriously mean it, plus 11 company holidays. ⚕️Fully-paid health benefits plan for employees: including Medical, Dental, and Vision and an HSA match. 👪Family Leave: All employees receive 12 weeks of 100% paid parental leave. Birthing parents are eligible for an additional 6-8 weeks of physical recovery time. 🍼Fertility & Family Benefits: We have partnered with Maven, a complete digital health benefit for starting and raising a family. In 2025, Flock will provide a $ 50,000-lifetime maximum benefit related to eligible adoption, surrogacy, or fertility expenses. 💖Caregiver Support: We have partnered with Cariloop to provide our employees with caregiver support 💸Carta Tax Advisor: Employees receive 1:1 sessions with Equity Tax Advisors who can address individual grants, model tax scenarios, and answer general questions. 💚ERGs: We want all employees to thrive and feel like they belong at Flock. We offer three ERGs today - Women of Flock, Flock Proud, and Melanin Motion. If you are interested in talking to a representative from one of these, please let your recruiter know. 💻WFH Stipend: $150 per month to cover the costs of working from home. 📚Productivity Stipend: $250 per year to use on Audible, Calm, Masterclass, Duolingo, Grammarly and so much more. 🏠Home Office Stipend: A one-time $750 to help you create your dream office. 🐾Pet Insurance: We’ve partnered withPumpkin to provide insurance for our employee’s fur babies. Flock is an equal opportunity employer. We celebrate diverse backgrounds and thoughts and welcome everyone to apply for employment with us. We are committed to fostering an environment that is inclusive, transparent, and collaborative. Mutual respect is central to how Flock operates, and we believe the best solutions come from diverse perspectives, experiences, and skills. We embrace our differences and know that we are stronger working together. If you need assistance or an accommodation due to a disability, please email us at . This information will be treated as confidential and used only to determine an appropriate accommodation for the interview process. At Flock Safety, we compensate our employees fairly for their work. Base salary is determined by job-related experience, education/training, as well as market indicators. The range above is representative of base salary only and does not include equity, sales bonus plans (when applicable) and benefits. This range may be modified in the future. This job posting may span more than one career level. Flock Safety is aware of fraudulent individuals and agencies falsely claiming to represent our company. All legitimate communication from Flock Safety will come from an email address ending in @flocksafety.com. We do not make job offers through messaging apps, social platforms, or unauthorized third parties, and we will never request payment or sensitive personal information during the hiring process. If you encounter suspicious outreach related to a Flock Safety role, please report it to Compensation Range: $90K - $150K