Trabajos thermal engineer en Fort Worth, TexasCrear alertas

Job Description Qualifications: Target candidates who meet the following qualifications: • 10+ years of professional experience in Electrical Engineering, • Majority of background in Utility / Power projects, • Active Professional Engineer (PE) license (required), • Bachelor's degree in electrical engineering (EE), • Willingness to work on a direct-hire basis, • Must be a US Citizen due to potential for Federal Work, • Bachelor's or Advanced Degree in Electrical Engineering, Electrical Power Engineering or related engineering discipline, • At least 10 years of engineering design and/or consulting experience., • Professional Engineering licensure (any US state), with the ability to acquire a license in additional states if required for a particular project. If a candidate is not licensed, they need the ability to gain licensure within one year of the hire date., • Proven ability to engage with clients, develop relationships, and win work, then deliver innovative solutions providing value to both the client and provider., • Demonstrated ability to engage in business growth strategy, including exploration and development of new project opportunities, including knowledge and application of new and emerging technologies., • Experience with proposal development and project execution planning, including scope development and man-hour estimates for engineering services., • Passion for mentoring and development of junior technical staff., • Strong communication and technical writing skills, • Availability to travel as required to support project needs (varies by project but typically less than 25%), • Availability to work at least 2 days per week in the office when not traveling. Must align with our Fort Worth, Texas, office and be willing to work hybrid in the office or client site 2 days per week. Fully remote is not considered. Location: Ft. Worth, TX., • Other important qualifications include experience with:, • Power distribution systems and microgrids, • Power generation projects exceeding 10 MW capacity, • HV or MV Substations, • Renewable energy projects, including wind, solar, hydro, geothermal and other technologies, • Energy storage systems, • Power system modeling experience using SKM Power Tools, ETAP or similar modeling software, • Protection and Control, SCADA or power system automation, • Campus utility master planning or decarbonization/climate response planning, • Cogeneration or combined heat and power systems, • The energy industry is undergoing rapid and dramatic changes, transforming the utility landscape to enhance reliability and sustainability. In response, Company is expanding its Energy & Power Solutions team to tackle the complexities of energy resiliency and decarbonization to deliver a cleaner and more secure energy future. We are seeking a senior-level electrical engineer for a leading role. This position will provide an opportunity to mentor and/or manage junior and mid-level electrical engineering staff members while also working closely with our clients to deliver exceptional services in the energy sector. Other responsibilities will include strategy formation, business development, and sales as we expand our energy transition portfolio., • This position provides the opportunity to engage with our clients, evaluate their energy needs, develop concept-level plans and solutions, and then take these through detailed design to provide for full execution of the solution. We offer and deliver a true "end-to-end" life-cycle service from exploration, development, operation, and repowering/retirement. Demonstrated abilities include a broad understanding of power systems and electrical engineering sciences. Experience in consulting, design, design management, and project management will be highly regarded, as will experience in Owner's Engineer roles or contract management and advisory (technical advisor/due diligence) roles, as well as strategic project development experience., • Your primary responsibilities will focus on leading an electrical engineering team to provide advisory services and engineering design solutions for clients across all market sectors. You will collaborate with our Client Account Managers and sales professionals on pursuits of strategic importance to the firm. You'll be expected to possess highly collaborative and sophisticated communication and problem-solving skills. Successful candidates will have a demonstrated ability to anticipate challenges and manage "up and out" while supporting large teams responsible for the daily details of project delivery., • If you are passionate about developing reliable and sustainable energy projects, motivated by a challenge, and enjoy working with a dynamic, multi-disciplinary team to develop innovative solutions, this is the place for you. Come join our growing team to realize the future of energy! Please carefully screen candidates against the requirements and details laid out within the requisition. We need the Recruiting partners to showcase their ability to deliver on the following criteria: Candidate Talent Profile Target candidates who meet the following qualifications: 10+ years of professional experience in Electrical Engineering Majority of background in Utility / Power projects Active Professional Engineer (PE) license (required) or ability to gain licensure within 1 year Bachelor's degree in electrical engineering (EE) US Citizenship required Salary 140k - 180k

Job Description Job Qualifications Bachelors or Advanced Degree in Electrical Engineering, Electrical Power Engineering or related engineering discipline At least 10 years of engineering design and/or consulting experience. Professional Engineering licensure (any US state), with the ability to acquire a license in additional states if required for a particular project. If candidate is not licensed, they need the ability to gain licensure within one year of hire date. Proven ability to engage with clients, develop relationships and win work, then deliver innovative solutions providing value to both the client and provider. Demonstrated ability to engage in business growth strategy, including exploration and development of new project opportunities, including knowledge and application of new and emerging technologies. Experience with proposal development and project execution planning, including scope development and manhour estimates for engineering services. Passion for mentoring and development of junior technical staff. Strong communication and technical writing skills Availability to travel as required to support project needs (varies by project but typically less than 25%) Availability to work at least 2 days per week in the office when not travelling. Must align with our Fort Worth Texas office and be willing to work hybrid in the office or client site 2 days per week. Fully remote not considered. Location: Ft. Worth TX. Other highly regarded qualifications include experience with: Power distribution systems and microgrids Power generation projects exceeding 10MW capacity HV or MV Substations Renewable energy projects including wind, solar, hydro, geothermal and other technologies Energy storage systems Power system modeling experience using SKM Power Tools, ETAP or similar modeling software Protection and Control, SCADA or power system automation Campus utility master planning or decarbonization/climate response planning Cogeneration or combined heat and power systems Thermal utility plants and distribution systems (steam, hot water, chilled water) Responsibilities: The energy industry is undergoing rapid and dramatic changes, transforming the utility landscape to enhance reliability and sustainability. In response, Jacobs is expanding its Energy & Power Solutions team to tackle the complexities of energy resiliency and decarbonization to deliver a cleaner and more secure energy future. We are seeking a senior level electrical engineer for a leading role. This position will provide an opportunity to mentor and/or manage junior and mid-level electrical engineering staff members while also working closely with our clients to deliver exceptional services in the energy sector. Other responsibilities will include strategy formation, business development and sales as we expand our energy transition portfolio. This position provides the opportunity to engage with our clients, evaluate their energy needs, develop concept-level plans and solutions, and then take these through detailed design to provide for full execution of the solution. We offer and deliver a true end to end life-cycle service from exploration, development, operation, and repowering/retirement. Demonstrated abilities include a broad understanding of power systems and electrical engineering sciences. Experience in consulting, design, design management and project management will be highly regarded, as will experience in Owners Engineer roles or contract management, and advisory (technical advisor/due diligence) roles as well as strategic project development experience. Your primary responsibilities will focus on leading an electrical engineering team to provide advisory services and engineering design solutions for clients across all market sectors. You will collaborate with our Client Account Managers and sales professionals on pursuits of strategic importance to the firm. Youll be expected to possess highly collaborative and sophisticated communication and problem-solving skills. Successful candidates will have a demonstrated ability to anticipate challenges and manage up and out while supporting large teams responsible for the daily details of project delivery. If you are passionate about developing reliable and sustainable energy projects, motivated by a challenge, and enjoy working with a dynamic, multi-disciplinary team to develop innovative solutions, Jacobs is the place for you. Come join our growing team to realize the future of energy! U.S. Citizenship required Comments/Special Instructions Please carefully screen candidates against the requirements and details laid out within the requisition. We need the Recruiting partners to showcase their ability to deliver on the following criteria: Candidate Talent Profile Target candidates who meet the following qualifications: 10+ years of professional experience in Electrical Engineering Majority of background in Utility / Power projects Active Professional Engineer (PE) license (required) or ability to gain licensure within 1 year Bachelors degree in electrical engineering (EE) Willingness to join Jacobs on a direct-hire basis US Citizenship required

Job Description Company Overview: MP Materials (NYSE: MP) is rebuilding American industrial capability for a new era of autonomy, robotics, and electrification. We are the only U.S. company with a fully integrated rare earth supply chain—from mining and refining to advanced metal and magnet manufacturing. Our products include both the critical materials used to make permanent magnets and the finished magnets themselves—enabling next-generation technologies in robotics, automation, aerospace, transportation, defense, and energy systems. These materials are the foundation of physical AI—the convergence of computation, movement, and control. We hire ambitious, mission-driven people who want to tackle complex challenges and shape the future of strategic industries. Our culture is rooted in teamwork, resiliency, and integrity, with a deep commitment to operational excellence and national purpose. MP is rapidly evolving from a materials producer into a leading U.S. manufacturer—and our people are driving that transformation. Position Overview: The Senior Quality Systems Engineer will be a member of our new Magnetics Business headquartered in Fort Worth, Texas. This is an opportunity to be a part of building our team, our factory, our systems, and our culture as the Magnetics team helps to define the future of American manufacturing. The successful candidate will be a highly organized and detail-oriented professional with experience in the development, implementation, and sustaining of Quality Management Systems (QMS) in compliance with internal, customer, and certification body requirements. This is a rare opportunity to have a central role in designing and implementing an entire QMS for a greenfield advanced manufacturing facility that is the shaping future of American manufacturing. MP Materials is committed to re-establishing a domestic American supply chain for rare earth magnets, and the new Magnetics facility will perform a mix of chemical, electrical, mechanical, thermal, and machining processes. The Senior Quality Systems Engineer will need to engage with a broad range of internal technical specialists and gain a working understanding of the processes involved to effectively lead the development, implementation, and sustaining of the new QMS. The Senior Quality Systems Engineer will drive third party engagements to ensure that the QMS is integrated as needed with vendor and customer requirements and is compliant with required third party certifications. Position Responsibilities: • Leadership role in ensuring industry best-practices are incorporated into the development and implementation of the new Quality Management System (QMS) for MP Magnetics., • Ensure the new QMS is compliant with all required third party certifications, including ISO 9001 and IATF 16959 certifications (or equivalent)., • Manage internal audit program (scheduling, reporting, and conducting), and support all third-party certification and auditing processes., • Work closely with customer reps to ensure that MP Magnetics’ QMS are compliant with all customer requirements and integrated as needed with customer systems., • Work closely with suppliers to ensure that their QMS are compliant with MP Magnetics’ requirements and integrated as needed with MP Magnetics’ QMS., • Lead non-compliance corrective action activities from internal and external (customer, supplier, and certification) audits., • Ensure that all in-house systems and procedures are updated, revised, and modified as needed to meet the needs of both customers and external certification bodies, while ensuring the simplicity and ease of execution that facilitates their consistent use., • Lead in the development and implementation of Control Plans, FMEA and inspection documents for production analysis., • Participate in and facilitate FMEA and troubleshooting activities, and update quality documentation accordingly. Communicate resulting changes to relevant stakeholders and track outcomes to ensure lessons learned from quality events are carried forward., • BS or MS in engineering discipline., • 5+ years quality systems experience under relevant quality regimes., • ISO 9001 Lead Auditor Certified., • Trained and experienced with Core Tools, such as Control Plans, FMEA, SPC, APQP/PPAP., • Experience managing both Internal and External (customer and surveillance) audits., • Strong sense of process flow and practical requirements., • Good understanding of human factors., • Previous work in industrial settings and hands-on approach to projects., • Experience and management of root cause analysis, corrective and preventative actions programs., • Quality Core Tool (FMEA, APQP, PPAP, and SPC) Training certified., • Experience in materials science/metallurgy-driven manufacturing environments., • Experience with Tier 1 telecommunication supply., • Progressive responsibility growth in career., • Lean and Six Sigma certifications. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability, protected veteran status, or any other characteristic protected by law. Underrepresented groups/Women/Disabled/Veterans are encouraged to apply. Candidates whose disabilities make them unable to meet the position’s requirements will still be considered qualified if they can perform the essential functions of the job with reasonable accommodation. Your Right to Work – In compliance with federal law, all persons hired will be required to verify identity and eligibility to work in the United States and to complete the required employment verification document form upon hire. For Assistance with Application - Alternative methods of applying for employment are available to individuals unable to submit an application through this site because of a disability. Contact Human Resources Department at 702-844-6111; dial 7 when prompted for HR; 1700 South Pavilion Center Dr. 8th Floor, Las Vegas, NV 89135 to discuss reasonable accommodation.

Job Description Company Overview: MP Materials (NYSE: MP) is rebuilding American industrial capability for a new era of autonomy, robotics, and electrification. We are the only U.S. company with a fully integrated rare earth supply chain—from mining and refining to advanced metal and magnet manufacturing. Our products include both the critical materials used to make permanent magnets and the finished magnets themselves—enabling next-generation technologies in robotics, automation, aerospace, transportation, defense, and energy systems. These materials are the foundation of physical AI—the convergence of computation, movement, and control. We hire ambitious, mission-driven people who want to tackle complex challenges and shape the future of strategic industries. Our culture is rooted in teamwork, resiliency, and integrity, with a deep commitment to operational excellence and national purpose. MP is rapidly evolving from a materials producer into a leading U.S. manufacturer—and our people are driving that transformation. Position Overview: The role requires a combination of technical expertise, problem-solving skills, and collaborative abilities to drive the development and optimization of machining processes for these challenging materials. The ideal candidate will have hands-on experience in machining metal/ceramic cutting and grinding operations. The Process Engineer, Finishing must be comfortable with failure analysis, continuous improvements, equipment fault diagnosis, and process development. The new facility will contain a broad range of chemical, mechanical, and thermal processes, including electrowinning, strip casting, powder production, pressing & sintering, machining, and assembly. Because of the broad range of processes in use, it is important that the Process Engineer, Finishing be able to engage with a broad range of technical specialists and gain a working understanding of the physical processes, key control metrics, and potential hazards involved. The key aspect of this role is to provide technical coordination and support to the part machining operation to meet customer requirements. Position Responsibilities: • Develop and optimize machining processes for magnetic materials, including sawing, slicing, and grinding., • Design and implement tooling solutions optimized for materials, considering factors such as tool wear, material removal rates, and surface finish requirements., • Collaborate with design and manufacturing teams to provide input on material selection, component geometry, and machining feasibility during product development stages., • Conduct feasibility studies and process simulations to evaluate the manufacturability of new designs and identify potential challenges or opportunities for improvement., • Define machining parameters, tooling specifications, and quality standards to ensure consistent production performance and adherence to customer requirements., • Implement process monitoring and control systems to maintain optimal machining conditions, minimize scrap rates, and maximize throughput., • Troubleshoot machining issues, root cause analysis, and implement corrective actions to resolve production disruptions and improve process robustness., • Bachelor’s degree in Mechanical Engineering, Materials Science, or a related field. Advanced degree preferred., • Minimum of 5 years of experience in process engineering roles focused on machining, preferably with a specialization in carbides and ceramics., • Strong knowledge of machining principles, cutting tool materials, and machining parameters relevant to carbide and ceramic materials., • Proficiency in CAD/CAM software for toolpath generation and machining simulation (e.g., SolidWorks, AutoCAD, Mastercam)., • Experience with CNC machining centers, grinding machines, and other precision machining equipment., • Familiarity with statistical analysis tools and methodologies for process optimization (e.g., Six Sigma, Design of Experiments)., • Excellent problem-solving skills and the ability to analyze complex technical issues and develop practical solutions., • Effective communication skills and the ability to collaborate cross-functionally with engineering, manufacturing, and quality teams. Your Right to Work – In compliance with federal law, all persons hired will be required to verify identity and eligibility to work in the United States and to complete the required employment verification document form upon hire. For Assistance with Application - Alternative methods of applying for employment are available to individuals unable to submit an application through this site because of a disability. Contact Human Resources Department at 702-625-5679; 1700 South Pavilion Center Dr. 8th Floor, Las Vegas, NV 89135 to discuss reasonable accommodation.

Job DescriptionReady to make connectivity from space universally accessible, secure and actionable? Then you’ve come to the right place! E-Space is bridging Earth and space to enable hyper-scaled deployments of Internet of Things (IoT) solutions and services. We are building a highly-advanced low Earth orbit (LEO) space system that will fundamentally change the design, economics, manufacturing and service delivery associated with traditional satellite and terrestrial IoT systems. We’re intentional, we’re unapologetically curious and we’re 100% committed to innovate space-based communications and deliver actionable intelligence that will expand global economies, protect space and our planet and enhance our overall quality of life. The E-Space Manufacturing Solar Team builds the world's most advanced aerospace products. The Engineer using co-evaporation or sputter vacuum deposition is responsible for the operation, troubleshooting and improvement of thin-film deposition processes in roll-to-roll (R2R) vacuum equipment. The focus of this role is on preparing, maintaining, repairing and running large physical vapor deposition equipment in a roll-to-roll format to successfully produce thin film product at large scale. The engineer will work closely with equipment, and maintenance engineers, process engineers for other process steps, backend, and production teams to deliver manufacturable thin-film product. What you'll be doing: * Prepare, operate, and maintain co-evaporation or sputter equipment for thin-film deposition in roll-to-roll vacuum systems. * Support the modification and repair of large-area R2R vacuum deposition equipment, including vacuum sensors and pressure gauges, vacuum pumps and valves. * Rebuild and install deposition sources that include complex mechanical parts, specialty materials, and electrical connections. * Diagnose problems based on close examination of mechanical assemblies, process characteristics and software diagnostics. * Observe and control process parameters such as deposition rates, substrate temperature, vacuum conditions, and web speed to assure proper operation or make setpoint corrections. * Troubleshoot process deviations related to composition, uniformity, adhesion, and device performance. * Collaborate with device and backend teams to ensure deposition processes are compatible with interconnection, lamination, and module assembly. * Support scale-up from lab or pilot systems to high-volume roll-to-roll production. * Develop and document process recipes, operating procedures, and control limits. * Support performance improvement initiatives targeting efficiency, yield, and reproducibility. What you will bring to this role: * MS in Materials Science, Physics, Electrical Engineering, or related technical field (or BS with significant relevant industry experience). * Minimum 5 years of hands-on experience in thin-film vacuum deposition. * Strong mechanical aptitude and troubleshooting ability for complex vacuum deposition equipment. * Experience working with vacuum systems, vacuum gauges, valves, and control methods. * Ability to work effectively in a multidisciplinary manufacturing and R&D environment. * Excellent communication and organizational skills. Extra points for the following: * Experience with complex deposition hardware for large-area or high-throughput systems. * Hands-on experience with troubleshooting PLC controlled equipment. * Experience operating closed-loop or real-time process control for semiconductor deposition. * Experience designing and building equipment for thin film semiconductor deposition and thermal processes. * Skills with mechanical design and electrical systems diagnosis and repair. This is a full time, exempt position, based out of our Arlington, TX office. We are redefining how satellites are designed, manufactured and used—so we’re looking for candidates with passion, deep knowledge and direct experience on LEO satellite component development, design and in-orbit activities. If that’s your experience – then we’ll be immediately wow-ed. E-Space is not currently able to provide employment sponsorship for candidates who do not hold work authorization for the location of this role. Why E-Space is right for you: As a member of our team, you will play a crucial role in driving our success. Our team members have a strong sense of dedication and responsibility; this includes a strong commitment to our mission to create an entirely new suite of global capabilities to improve lives, business efficiencies and build a smarter planet. This means that there will be times when extra hours, including nights and weekends, may be needed to meet critical deadlines and mission goals. In return, we offer a dynamic work environment with opportunities for professional growth and development and the chance to make a meaningful impact in a high-growth industry. We want you to make the most of your journey at E-Space. That’s why we support and invest in the physical, emotional and financial well-being of our team members and their families. Some of what you can expect when working at E-Space: • An opportunity to really make a difference• Sustainability at our core• Fair and honest workplace• Innovative thinking is encouraged• Competitive salaries• Continuous learning and development• Health and wellness care options• Financial solutions for the future • Optional legal services (US only)• Paid holidays• Paid time off

Job Description Company Overview: Materials (NYSE: MP) is rebuilding American industrial capability for a new era of autonomy, robotics, and electrification. We are the only U.S. company with a fully integrated rare earth supply chain—from mining and refining to advanced metal and magnet manufacturing. Our products include both the critical materials used to make permanent magnets and the finished magnets themselves—enabling next-generation technologies in robotics, automation, aerospace, transportation, defense, and energy systems. These materials are the foundation of physical AI—the convergence of computation, movement, and control. We hire ambitious, mission-driven people who want to tackle complex challenges and shape the future of strategic industries. Our culture is rooted in teamwork, resiliency, and integrity, with a deep commitment to operational excellence and national purpose. MP is rapidly evolving from a materials producer into a leading U.S. manufacturer—and our people are driving that transformation. Position Overview: MP Materials is seeking a hands-on Engineer to support the development of advanced manufacturing technologies for grain boundary diffusion (GBD) in high-performance rare earth permanent magnets. This role focuses on optimizing magnetic properties through interface engineering, diffusion treatments, and tailored thermal treatments. The ideal candidate will bring deep expertise in materials thermodynamics, diffusion kinetics, and physical metallurgy. This is a rare opportunity to play a key role in returning an essential manufacturing capability to the USA. Position Responsibilities: • Lead experimental projects, overseeing project planning, execution, and delivery of the development and optimization of GBD processes at the laboratory and pilot-scale to enhance the magnetic properties of permanent rare-earth magnets., • Design and conduct experiments to optimize new materials and processes, including but not limited to developing and refining heat treatment profiles to support GBD and microstructural control in permanent rare-earth magnet systems., • Characterize microstructure and diffusion behavior using advanced materials analysis techniques such as SEM-EDS, EPMA, XRD, DSC, etc., • Apply laboratory and pilot-scale findings to assist process scale up to production., • Mentor technicians and engineers to ensure high-quality execution of experimental trials and data collection, providing technical guidance in metallurgical materials, and fostering a culture of continuous learning and professional development., • Lead and manage development projects, document and communicate findings, and build team knowledge of current and future magnet research., • Work closely with EHS to ensure that all work is done to ensure world-class health and safety, and full compliance with relevant environmental regulations., • Master’s or Ph.D. in Materials Science & Engineering, Metallurgy, Physics, or related field., • Hands-on experience with metallurgical or ceramic processing, heat treatments, and materials characterization methods., • Deep understanding of materials thermodynamics and kinetics., • Agile researcher, adept at identifying untested questions about materials and the interactions between processing, structure, and performance., • Experience with manufacturing rare earth materials and permanent magnets., • Experience leading technical development projects, with the ability to prioritize and manage multiple concurrent projects., • Experience with programming, modeling, and/or machine learning techniques and the ability to apply those skills to advance physical understanding of materials. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability, protected veteran status, or any other characteristic protected by law. Underrepresented groups/Women/Disabled/Veterans are encouraged to apply. Candidates whose disabilities make them unable to meet the position’s requirements will still be considered qualified if they can perform the essential functions of the job with reasonable accommodation. Your Right to Work – In compliance with federal law, all persons hired will be required to verify identity and eligibility to work in the United States and to complete the required employment verification document form upon hire. For Assistance with Application - Alternative methods of applying for employment are available to individuals unable to submit an application through this site because of a disability. Contact Human Resources Department at 702-844-6111; dial 7 when prompted for HR; 1700 South Pavilion Center Dr. 8th Floor, Las Vegas, NV 89135 to discuss reasonable accommodation.

Job Description Company Overview: MP Materials (NYSE: MP) is rebuilding American industrial capability for a new era of autonomy, robotics, and electrification. We are the only U.S. company with a fully integrated rare earth supply chain—from mining and refining to advanced metal and magnet manufacturing. Our products include both the critical materials used to make permanent magnets and the finished magnets themselves—enabling next-generation technologies in robotics, automation, aerospace, transportation, defense, and energy systems. These materials are the foundation of physical AI—the convergence of computation, movement, and control. We hire ambitious, mission-driven people who want to tackle complex challenges and shape the future of strategic industries. Our culture is rooted in teamwork, resiliency, and integrity, with a deep commitment to operational excellence and national purpose. MP is rapidly evolving from a materials producer into a leading U.S. manufacturer—and our people are driving that transformation. Position Overview: The new facility will contain a broad range of chemical, mechanical, and thermal processes, and the Senior Electrical Operations Engineer will be expected to oversee the safe and efficient operation of electrical infrastructure in a manufacturing environment, serving as the technical lead for troubleshooting, maintenance, and system upgrades. The Senior Electrical Operations Engineer will lead the efforts to constantly upgrade and improve site safety, operating efficiency, reliability, and redundancy of electrical systems, to outperform as a state-of-the-art facility. Position Responsibilities: • Lead as a subject matter expert in the safe, efficient, and reliable operation of electrical systems, driving OPEX and continuous improvement initiatives across the facility., • Identify, prioritize, and execute electrical projects aimed at reducing operating expenses, optimizing energy usage, and improving system performance., • Conduct operational assessments and system reviews to uncover inefficiencies, propose data[1]driven solutions, and implement performance-enhancing upgrades., • Collaborate cross-functionally with Operations, Engineering, Finance, and EHS teams to scope, justify, and implement electrical OPEX projects., • Champion a safety-first culture by enforcing adherence to electrical safety standards, participating in field reviews, and integrating risk-reduction strategies into project design and execution., • Drive root cause analysis (RCA) investigations for recurring electrical issues, inefficiencies, or unplanned costs—ensuring corrective actions are implemented and validated., • Develop, document, and deploy electrical engineering standards and procedures that support long-term operational excellence and cost-efficiency., • Support engineering, construction, and commissioning teams with real-time operational input to ensure new designs align with plant needs and long-term OPEX goals., • Monitor and report on the impact of implemented improvements, including KPIs such as energy savings, cost reductions, system uptime, and process optimization., • Deliver technical training and documentation to operations staff, ensuring consistent understanding of electrical system enhancements and energy efficiency practices., • Bachelor’s degree in Electrical Engineering or a related engineering discipline., • Minimum 10 years of experience in electrical engineering, with a strong background in industrial or manufacturing environments., • Proficient in ERP systems, Microsoft Office Suite, and electrical design and analysis tools such as AutoCAD, AutoCAD Electrical, and SKM PowerTools., • Hands-on experience in engineering, troubleshooting, and optimizing control voltage, low-voltage (LV), and medium-voltage (MV) electrical systems., • Skilled in performing power system studies, including load calculations, short-circuit analysis, arc flash assessments, and protective device coordination., • Solid understanding of electrical engineering principles with cross-functional knowledge of mechanical and process systems., • Professional certifications in Six Sigma, reliability engineering, manufacturing systems, or industrial automation are highly desirable., • Strong working knowledge of relevant industry standards and regulatory codes, including NEC, IEEE, NETA, OSHA, NRTL, and UL., • Experience with critical electrical infrastructure such as uninterruptible power supplies (UPS), diesel/gas generators, switchgear, power distribution units, VFDs, and automatic/static transfer switches., • Skilled in setting clear priorities and making sound, timely decisions in fast-paced, high-stakes operational environments., • Consistently dependable in meeting deadlines and delivering accurate, detailed technical documentation., • Demonstrated analytical and problem-solving strengths, with a continuous improvement mindset and drive for innovation. Your Right to Work – In compliance with federal law, all persons hired will be required to verify identity and eligibility to work in the United States and to complete the required employment verification document form upon hire. For Assistance with Application - Alternative methods of applying for employment are available to individuals unable to submit an application through this site because of a disability. Contact Human Resources Department at 702-625-5679; 1700 South Pavilion Center Dr. 8th Floor, Las Vegas, NV 89135 to discuss reasonable accommodation.

Job Description Company Overview: MP Materials (NYSE: MP) is rebuilding American industrial capability for a new era of autonomy, robotics, and electrification. We are the only U.S. company with a fully integrated rare earth supply chain—from mining and refining to advanced metal and magnet manufacturing. Our products include both the critical materials used to make permanent magnets and the finished magnets themselves—enabling next-generation technologies in robotics, automation, aerospace, transportation, defense, and energy systems. These materials are the foundation of physical AI—the convergence of computation, movement, and control. We hire ambitious, mission-driven people who want to tackle complex challenges and shape the future of strategic industries. Our culture is rooted in teamwork, resiliency, and integrity, with a deep commitment to operational excellence and national purpose. MP is rapidly evolving from a materials producer into a leading U.S. manufacturer—and our people are driving that transformation. Position Overview: The Senior Applications Engineer will have a technical background and will understand how customers use the unique properties of rare earth permanent magnets across a variety of end use applications. They will be familiar with the broad range of chemical, thermal, and mechanical, and thermal processes used to produce magnets, magnet assemblies, and electric motors. They will be experienced at working with customers in the design and quoting process. They will also have experience building the underlying tools and systems to support these processes. In addition to responding to requests from current and prospective customers, the successful candidate will play a critical role in identifying current and future product value by synthesizing customer needs and market trends. This is an opportunity to be a part of building our team, our factory, and our culture as the Magnetics team helps to define the future of American manufacturing. Position Responsibilities: • Act as the permanent magnet subject matter expert with existing and potential customers in reviewing requests for quotes and other requests for information; interpreting customer requests into well-defined product requirements., • Lead cross-functional project execution to integrate MP magnets into customer applications:, • Engage with customer technology teams to understand, communicate, and negotiate product requirements with customers., • Coordinate with cross-functional teams to provide customers with samples and prototypes., • Synthesize and communicate short and long duration customer project goals based on current business conditions and evolving customer and market needs., • Develop, deploy, and continuously improve tools for the effective and timely quoting of new products; train and support the sales team as needed in the use of the tools., • BS or higher in mechanical or electrical engineering, or other relevant engineering disciplines., • 5+ years in as an applications engineer., • Working knowledge of magnetic properties and experience specifying rare earth permanent magnet grades for applications such as traction motors, actuators, and sensors including end use applications and key performance metrics., • Experience working directly with external customers to understand technical needs and translate them into operational actions and product specifications., • Experience partnering with commercial teams to generate product specifications and quotations., • Ability to effectively communicate with a spectrum of different roles, from customers to senior leaders to manufacturing operators., • Excellent written and verbal communication skills, including the ability to prepare well-written documents for reporting to customers and leadership., • Entrepreneurial mindset, with the ability to prioritize and manage multiple concurrent projects., • Hands-on experience in materials manufacturing, ideally the manufacturing of rare earth materials, permanent magnets, and/or ceramic and metal powders., • Experience conducting market studies to evaluate, interpret and forecast design trends and component requirements for electric machines. Your Right to Work – In compliance with federal law, all persons hired will be required to verify identity and eligibility to work in the United States and to complete the required employment verification document form upon hire. For Assistance with Application - Alternative methods of applying for employment are available to individuals unable to submit an application through this site because of a disability. Contact Human Resources Department at 702-625-5679; 1700 South Pavilion Center Dr. 8th Floor, Las Vegas, NV 89135 to discuss reasonable accommodation.

Job Description Company Overview: MP Materials (NYSE: MP) is rebuilding American industrial capability for a new era of autonomy, robotics, and electrification. We are the only U.S. company with a fully integrated rare earth supply chain—from mining and refining to advanced metal and magnet manufacturing. Our products include both the critical materials used to make permanent magnets and the finished magnets themselves—enabling next-generation technologies in robotics, automation, aerospace, transportation, defense, and energy systems. These materials are the foundation of physical AI—the convergence of computation, movement, and control. We hire ambitious, mission-driven people who want to tackle complex challenges and shape the future of strategic industries. Our culture is rooted in teamwork, resiliency, and integrity, with a deep commitment to operational excellence and national purpose. MP is rapidly evolving from a materials producer into a leading U.S. manufacturer—and our people are driving that transformation. Position Overview: The new facility will contain a broad range of chemical, mechanical, and thermal processes, including electrowinning, strip casting, powder production, pressing & sintering, machining, and assembly. Because of the broad range of processes in use, it is important that the Design Engineer have a diverse technical background with the ability to engage with a broad range of technical specialists and gain a working understanding of the physical processes, key control metrics, and potential hazards involved. The successful candidate will also be passionate about pairing design work with much of the actual “dirty hands” work to ensure that everything works as intended initially and over time. Position Responsibilities: • Works closely with broader process engineering, controls engineering, and manufacturing teams to create automated processes with an integrated process flow., • Supports and leads the design, manufacturing, installation, and commissioning activities to deliver projects from concept to fully operational in the plant., • Delivers finished designs, detailed drawings, and engineering specifications for supplier bidding, and leads vendor compliance efforts after purchase., • Ability to lead Design Engineering technician(s) to achieve required tasks., • Conducts and participates in technical design reviews, supplier evaluations and internal and external compliance audits to relevant industrial standards (ASTM, ISO etc)., • Perform CAD, FEA, and durability simulations as required of concept designs to provide recommendations for physical prototype candidates, execute testing, and ensure successful commissioning and ongoing operation., • Research and implement automation systems, detailed design, component sourcing, manufacture, and deployment of manufacturing equipment., • Works closely with EHS to ensure that all work is done to ensure world class health and safety, and full compliance with relevant environmental regulations., • Documents all work for seamless handoff to end users, prepares technical reports, and follows all corporate change management procedures., • Lead and support continuous improvement activities to produce ongoing, meaningful improvements to worker safety, process uptime, and product quality., • BS or MS in mechanical engineering, chemical engineering, or related field., • At least 5 years process design and automation experience within a manufacturing environment., • Knowledge in automation of industrial processes and materials handling., • Experience in machine design and testing., • Knowledge of statistical process control, and experience in designing control systems., • Broad knowledge and experience across multiple CAD tools., • Excellent spatial visualization and reasoning skills, with a history of conceiving of successful creative designs for bespoke problems., • Project Management and hands-on approach to projects., • Sound knowledge of Process Safety., • Good understanding of human factors in manufacturing., • At least 5 years equipment design and process automation experience in metals, semiconductor, or specialty chemicals industries preferred., • Ability to identify and solve problems, and effectively communicate and advocate for these solutions to others (from operators to management)., • Excellent written and verbal communication skills. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability, protected veteran status, or any other characteristic protected by law. Underrepresented groups/Women/Disabled/Veterans are encouraged to apply. Candidates whose disabilities make them unable to meet the position’s requirements will still be considered qualified if they can perform the essential functions of the job with reasonable accommodation. Your Right to Work – In compliance with federal law, all persons hired will be required to verify identity and eligibility to work in the United States and to complete the required employment verification document form upon hire. For Assistance with Application - Alternative methods of applying for employment are available to individuals unable to submit an application through this site because of a disability. Contact Human Resources Department at 702-844-6111; dial 7 when prompted for HR; 1700 South Pavilion Center Dr. 8th Floor, Las Vegas, NV 89135 to discuss reasonable accommodation.

Job Description Company Overview: MP Materials (NYSE: MP) is rebuilding American industrial capability for a new era of autonomy, robotics, and electrification. We are the only U.S. company with a fully integrated rare earth supply chain—from mining and refining to advanced metal and magnet manufacturing. Our products include both the critical materials used to make permanent magnets and the finished magnets themselves—enabling next-generation technologies in robotics, automation, aerospace, transportation, defense, and energy systems. These materials are the foundation of physical AI—the convergence of computation, movement, and control. We hire ambitious, mission-driven people who want to tackle complex challenges and shape the future of strategic industries. Our culture is rooted in teamwork, resiliency, and integrity, with a deep commitment to operational excellence and national purpose. MP is rapidly evolving from a materials producer into a leading U.S. manufacturer—and our people are driving that transformation. Position Overview: The Process Engineer – Powder will be an integral part of the team designing and building a new metal, alloy, and magnet-making facility. This is a rare opportunity to have a central role in the development of a greenfield advanced manufacturing facility and helping to define the future of American manufacturing. The ideal candidate will have hands- on experience in controlling metal powder production processes such as powder conveyance, hydrogen decrepitation, jet milling, classification, blending, quality control and other related powder processing techniques. The Process Engineer must be comfortable with equipment fault diagnosis, process development, PLCs, and P&ID. This position reports into a Senior Engineering Manager. The new facility will contain a broad range of chemical, mechanical, and thermal processes, including electrowinning, strip casting, powder production, pressing & sintering, machining, and assembly. Because of the broad range of processes in use, it is important that the Process Engineer be able to engage with a broad range of technical specialists and gain a working understanding of the physical processes, key control metrics, and potential hazards involved. The key aspect of this role is to provide technical coordination and support to the powder processing operation to meet customer requirements. Position Responsibilities: • Member of the Production Engineering team. Work with production team members of upstream and downstream processes to execute the products for customers., • Work with procurement, vendors, maintenance, operators, and other team members on equipment specification, design reviews, and commissioning of new plant., • Contribute to EHS risk assessments, HAZOP studies, and regulatory compliance., • Plan, execute, and assist with process, and procedure development for hydrogen decrepitation (HD) furnace, Jet milling, dry grinding and powder blending., • Work closely with the NPI team in new process development and deployment in industrial scale., • Provide technical training and support to the production team and technicians on process knowledge., • Evaluate customer requirements and work in partnership with broader manufacturing and engineering teams to define process control plans to meet customer specifications., • Monitors and directs changes to key operating parameters under area of responsibility driving to achieve high yield, consistent product quality, and minimal EHS impacts., • Supervise the daily use of quality control procedures, driving initiatives to ensure stable and efficient powder processing operations., • Investigate and resolve equipment and quality issues within HD furnace, Jet Milling and subprocesses, working with QA, production, and customer service to address any product quality or customer complaints., • Document and disclose intellectual property and assist in patent filing preparation and defense., • BS degree in Metallurgy/Materials Science, Mechanical, Chemical Engineering, Chemistry, or related field., • 3-5 years’ experience in metal powder processing with industrial scale processes and equipment., • Deep understanding of powder metallurgy processes for part manufacturing and powder quality control fundamentals such as particle size distribution (PSD), particle flowability, particle agglomeration, and more., • Knowledge and experience in gathering and tracking process control information for SPC., • Problem solving experience (FMEA, 8D, A3, Root Cause Analysis etc.)., • Excellent written and verbal communication skills., • Experienced user of Microsoft Office suite., • 5+ years of experience of industrial experience powder manufacturing, processing, and/or conducting powder metallurgy processes., • Deep technical knowledge of metal powder pulverization and hydrogen furnace operation., • Practical experience of the process safety associated with metal powder processing., • Experience with SAP., • Ability to identify and solve problems and convince others (management down to operators) that your solution is the right one. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability, protected veteran status, or any other characteristic protected by law. Underrepresented groups/Women/Disabled/Veterans are encouraged to apply. Candidates whose disabilities make them unable to meet the position’s requirements will still be considered qualified if they can perform the essential functions of the job with reasonable accommodation. Your Right to Work – In compliance with federal law, all persons hired will be required to verify identity and eligibility to work in the United States and to complete the required employment verification document form upon hire. For Assistance with Application - Alternative methods of applying for employment are available to individuals unable to submit an application through this site because of a disability. Contact Human Resources Department at 702-844-6111; dial 7 when prompted for HR; 1700 South Pavilion Center Dr. 8th Floor, Las Vegas, NV 89135 to discuss reasonable accommodation.

Job Description Company Overview: MP Materials (NYSE: MP) is rebuilding American industrial capability for a new era of autonomy, robotics, and electrification. We are the only U.S. company with a fully integrated rare earth supply chain—from mining and refining to advanced metal and magnet manufacturing. Our products include both the critical materials used to make permanent magnets and the finished magnets themselves—enabling next-generation technologies in robotics, automation, aerospace, transportation, defense, and energy systems. These materials are the foundation of physical AI—the convergence of computation, movement, and control. We hire ambitious, mission-driven people who want to tackle complex challenges and shape the future of strategic industries. Our culture is rooted in teamwork, resiliency, and integrity, with a deep commitment to operational excellence and national purpose. MP is rapidly evolving from a materials producer into a leading U.S. manufacturer—and our people are driving that transformation. Position Overview: We are seeking a Senior Electrical Engineer to lead electrical design and execution for our new advanced manufacturing facility. This is a leadership role overseeing a team of Electrical Engineers and Electrical Drafters, providing technical guidance, project oversight, and professional development support as MP expands its engineering capabilities. This position offers a rare opportunity to play a pivotal role in the development of a greenfield facility that integrates chemical, thermal, and mechanical processes—pushing the boundaries of American manufacturing and sustainability. Position Responsibilities: • Lead a team of Electrical Engineers and Drafters, setting priorities, assigning tasks, reviewing work, and conducting performance evaluations., • Provide technical leadership across the full project lifecycle—from concept design, procurement, and construction to commissioning and operational support., • Manage and develop electrical system designs, including low- and medium-voltage distribution, motor controls, lighting, grounding, and lightning protection systems., • Ensure all engineering deliverables are complete, high-quality, and compliant with applicable codes (NEC, IEEE, IEC) and internal standards., • Oversee and approve detailed electrical drawings and documentation (e.g., schematics, one-line diagrams, panel layouts, cable routing, and conduit schedules)., • Review and validate vendor submittals, ensuring conformance with design specifications and regulatory standards., • Support field engineering and commissioning efforts, resolving technical issues during construction, testing, and startup., • Drive implementation of power management and SCADA-integrated systems for site-wide load management and operational efficiency., • Mentor junior engineers and drafters, providing technical coaching, training, and career development support., • Collaborate with mechanical, controls, process, and OT teams to ensure seamless integration of electrical systems with plant operations., • Lead or support engineering standards development and ensure adherence to internal design and documentation best practices., • Champion electrical safety, regulatory compliance, and risk mitigation strategies across all project phases., • Bachelor’s degree in electrical engineering or electrical engineering technology., • Minimum of 10 years of progressive experience in electrical engineering, including at least 3 years in technical leadership or supervisory role., • Proficient in AutoCAD, AutoCAD Electrical, SKM PowerTools, and Microsoft Office Suite., • Strong understanding of medium-voltage (MV) distribution systems, power system design, load studies, and protective coordination., • Extensive knowledge of electrical codes and standards, including NEC, NESC, IEEE, IEC, OSHA, UL, and NRTL., • Broad engineering knowledge including electrical, mechanical, process, instrumentation, and their integration in industrial environments., • Experience with project management methodologies (e.g., PMI), capable of managing multiple engineers, drafters, and supporting staff across concurrent projects., • Demonstrated project leadership, organizational agility, and strong communication skills across teams and stakeholders., • Skilled in prioritizing work, managing deadlines, and delivering high-quality engineering documentation in fast-paced environments., • Awareness and application of occupational safety standards and electrical system hazard prevention., • Professional Engineer (PE) license preferred., • Experience with high-voltage (HV) electrical systems, industrial automation, and control systems., • Proficiency in 3D design tools, such as Navisworks and SolidWorks., • Proven ability to manage external design consultants and electrical contractors, ensuring quality and alignment with project goals., • Strong analytical, troubleshooting, and decision-making skills for resolving complex engineering challenges., • Demonstrated ability to communicate effectively with multidisciplinary teams and stakeholders at all levels., • Detail-oriented with a strong commitment to innovation, continuous improvement, and sustainable engineering practices., • Thrive in fast-paced, hands-on, cross-functional environments, balancing technical depth with practical execution., • Dependable in meeting deadlines and delivering high-quality, comprehensive design documentation. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability, protected veteran status, or any other characteristic protected by law. Underrepresented groups/Women/Disabled/Veterans are encouraged to apply. Candidates whose disabilities make them unable to meet the position’s requirements will still be considered qualified if they can perform the essential functions of the job with reasonable accommodation. Your Right to Work – In compliance with federal law, all persons hired will be required to verify identity and eligibility to work in the United States and to complete the required employment verification document form upon hire. For Assistance with Application - Alternative methods of applying for employment are available to individuals unable to submit an application through this site because of a disability. Contact Human Resources Department at 702-844-6111; dial 7 when prompted for HR; 1700 South Pavilion Center Dr. 8th Floor, Las Vegas, NV 89135 to discuss reasonable accommodation.

Job Description Company Overview: MP Materials (NYSE: MP) is rebuilding American industrial capability for a new era of autonomy, robotics, and electrification. We are the only U.S. company with a fully integrated rare earth supply chain—from mining and refining to advanced metal and magnet manufacturing. Our products include both the critical materials used to make permanent magnets and the finished magnets themselves—enabling next-generation technologies in robotics, automation, aerospace, transportation, defense, and energy systems. These materials are the foundation of physical AI—the convergence of computation, movement, and control. We hire ambitious, mission-driven people who want to tackle complex challenges and shape the future of strategic industries. Our culture is rooted in teamwork, resiliency, and integrity, with a deep commitment to operational excellence and national purpose. MP is rapidly evolving from a materials producer into a leading U.S. manufacturer—and our people are driving that transformation. Position Overview: We are seeking a hands-on Electrical Engineer to join our growing Electrical Engineering team. This role offers the opportunity to be at the forefront of a greenfield project where you’ll design, develop, and optimize complex electrical systems that support a wide range of chemical, mechanical, and thermal processes. You’ll work cross-functionally with controls, operations, and mechanical engineering teams to ensure safe, efficient, and reliable infrastructure. The ideal candidate has a strong foundation in power distribution, system design, and industrial electrical standards, with the ability to take projects from concept through construction, commissioning, and operation. Position Responsibilities: • Lead the design, development, and support of low-voltage and medium-voltage electrical systems for new facility construction, process expansions, and equipment upgrades—managing all phases from concept through commissioning to full operation., • Prepare comprehensive electrical 2D design documentation, including Single-line diagrams and schematics, Load and power distribution layouts, Grounding and lightning protection systems, Cable and conduit routing plans, Panel schedules, PLC/control panel layouts, Network diagrams and P&IDs. All using tools such as AutoCAD and AutoCAD Electrical., • Review and approve vendor and contractor submittals, ensuring alignment with project specifications, safety standards, and applicable electrical codes (e.g., NEC, IEEE)., • Collaborate with cross-functional engineering teams (process, mechanical, controls, and civil) to ensure electrical systems are integrated effectively and designed to meet all project, safety, and regulatory requirements., • Support other engineers by developing design documentation, electrical calculations, technical reports, and specifications as required., • Assist in system-level analysis, including load calculations, short-circuit studies, arc flash assessments, and protective device coordination using tools like SKM PowerTools., • Contribute to the creation and enforcement of internal electrical design standards, templates, and documentation protocols., • Provide field engineering support during construction, commissioning, and startup, including resolving RFIs, reviewing redlines, and ensuring as-built accuracy., • Develop and maintain maintenance and troubleshooting procedures for electrical infrastructure to support safe and efficient long-term operations., • Participate in interpreting and applying industry codes, standards, and best practices, such as NEC, IEEE, IEC, OSHA, and NRTL guidelines., • Bachelor’s degree in Electrical Engineering, Electrical Engineering Technology, or a related field., • 3+ years of relevant experience in electrical design, preferably in an industrial, chemical, or manufacturing environment., • Proficient with AutoCAD and AutoCAD Electrical for schematic and layout design., • Working knowledge of electrical codes and standards: NEC, IEEE, IEC, OSHA, NRTL, and UL., • Experience designing and reviewing control panels, distribution panels, and motor control systems., • Understanding of power system components, including transformers, switchgear, MCCs, VFDs, UPS, and backup generators., • Ability to read and interpret P&IDs, equipment specifications, and process flow diagrams., • Proficient in Microsoft Office (Excel, Word, PowerPoint)., • Strong communication and collaboration skills to work effectively across disciplines and with field technicians. Your Right to Work – In compliance with federal law, all persons hired will be required to verify identity and eligibility to work in the United States and to complete the required employment verification document form upon hire. For Assistance with Application - Alternative methods of applying for employment are available to individuals unable to submit an application through this site because of a disability. Contact Human Resources Department at 702-625-5679; 1700 South Pavilion Center Dr. 8th Floor, Las Vegas, NV 89135 to discuss reasonable accommodation.

Job Description Company Overview: MP Materials (NYSE: MP) is rebuilding American industrial capability for a new era of autonomy, robotics, and electrification. We are the only U.S. company with a fully integrated rare earth supply chain—from mining and refining to advanced metal and magnet manufacturing. Our products include both the critical materials used to make permanent magnets and the finished magnets themselves—enabling next-generation technologies in robotics, automation, aerospace, transportation, defense, and energy systems. These materials are the foundation of physical AI—the convergence of computation, movement, and control. We hire ambitious, mission-driven people who want to tackle complex challenges and shape the future of strategic industries. Our culture is rooted in teamwork, resiliency, and integrity, with a deep commitment to operational excellence and national purpose. MP is rapidly evolving from a materials producer into a leading U.S. manufacturer—and our people are driving that transformation. Position Overview: MP Materials is seeking a dynamic and experienced Senior Applications Engineer for its Magnetics business located in Fort Worth, TX. The Applications Engineering team is responsible for working with our external customers and with MP Materials’ commercial, engineering, and manufacturing teams to ensure we are delivering the right products, on time, for each application at competitive costs. The Applications Engineering team will review customers’ technical needs, recommend the correct products (performance, cost, geometry), understand and be able to explain the competitive landscape internally and to the customer, and contribute to the design and development of the prototyping, measurement and production equipment needed to deliver on customer needs. The Senior Applications Engineer will be action-oriented, willing to get their hands dirty, and have experience in manufacturing. The successful candidate will play a critical role in identifying current and future product value by synthesizing customer needs and market trends, representing the voice of the customer within the broader engineering team, and have a deep understanding of relevant materials, properties and manufacturing processes required for permanent magnets. The successful candidate for this role will understand how customers use the unique properties of rare earth permanent magnets across a variety of end use applications, as well as the broad range of chemical, mechanical, and thermal processes used to produce magnets, magnet assemblies, and electric motors. Position Responsibilities: • Acts as the primary technical contact with existing and potential customers in designing, specifying, prototyping, and quoting products., • Works with customers to transition new products into manufacturing, and scale to high volume., • Develop models, tools, presentations, and documents to succinctly summarize and communicate with customers., • Manage the technical interfaces between customers and cross-functional MP Materials teams to design and manufacture rare earth magnets., • Act as a hands-on member of the engineering team, using excellent communication and organizational skills to guide and inform customer-related activities., • Interpret, understand, and negotiate product requirements and test methods (e.g., statement of requirements) between MP and customers., • Synthesize and communicate short and long duration customer project goals based on current business conditions and evolving customer and market needs., • Identify value opportunities for MP Materials products, to be realized through applications engineering, product or process development, continuous improvement activities, and/or long-term strategic initiatives., • BS or higher in mechanical, materials or electrical engineering, or in another relevant engineering discipline., • Working knowledge of rare earth magnets and/or use applications for permanent magnets (motors, sensors, etc.) and key performance metrics., • 5+ years’ experience in applications engineering or related activities., • Experience with materials manufacturing, particularly metals or metal powder., • Experience working directly with external customers to understand technical needs and translate them into operational actions and product specifications., • Experience partnering with commercial teams to generate product specifications and quotations., • Ability to effectively communicate across a spectrum of different roles internally and externally, from engineers, to procurement, to senior leaders, to manufacturing operators., • Excellent written and verbal communication skills., • Entrepreneurial mindset, with the ability to prioritize and manage multiple concurrent projects., • Deep working knowledge of the design of electric devices and/or magnets for electric devices., • Familiarity with rare earth permanent magnet grades and magnetic properties., • Deep working knowledge of the manufacturing processes for rare earth permanent magnets. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability, protected veteran status, or any other characteristic protected by law. Underrepresented groups/Women/Disabled/Veterans are encouraged to apply. Candidates whose disabilities make them unable to meet the position’s requirements will still be considered qualified if they can perform the essential functions of the job with reasonable accommodation. Your Right to Work – In compliance with federal law, all persons hired will be required to verify identity and eligibility to work in the United States and to complete the required employment verification document form upon hire. For Assistance with Application - Alternative methods of applying for employment are available to individuals unable to submit an application through this site because of a disability. Contact Human Resources Department at 702-844-6111; dial 7 when prompted for HR; 1700 South Pavilion Center Dr. 8th Floor, Las Vegas, NV 89135 to discuss reasonable accommodation.

Job Description Company Overview: MP Materials (NYSE: MP) is rebuilding American industrial capability for a new era of autonomy, robotics, and electrification. We are the only U.S. company with a fully integrated rare earth supply chain—from mining and refining to advanced metal and magnet manufacturing. Our products include both the critical materials used to make permanent magnets and the finished magnets themselves—enabling next-generation technologies in robotics, automation, aerospace, transportation, defense, and energy systems. These materials are the foundation of physical AI—the convergence of computation, movement, and control. We hire ambitious, mission-driven people who want to tackle complex challenges and shape the future of strategic industries. Our culture is rooted in teamwork, resiliency, and integrity, with a deep commitment to operational excellence and national purpose. MP is rapidly evolving from a materials producer into a leading U.S. manufacturer—and our people are driving that transformation. Position Overview: MP Materials is seeking a hands-on Design Engineer to be an integral part of the team designing and building a new metal, alloy, and magnet-making facility. This is a rare opportunity to have a central role in the development of a greenfield advanced manufacturing facility, and helping to define the future of American manufacturing. The ideal candidate is strongly mechanically inclined, and a natural tinkerer. This position will require a combination of both strong technical skills to design the machines needed for material movement and plant layout, and a hands-on nature to ensure that the successful sourcing, construction, and commissioning of the designs. The new facility will contain a broad range of chemical, mechanical, and thermal processes, including electrowinning, strip casting, powder production, pressing & sintering, machining, and assembly. Because of the broad range of processes in use, it is important that the Design Engineer have a diverse technical background with the ability to engage with a broad range of technical specialists and gain a working understanding of the physical processes, key control metrics, and potential hazards involved. The successful candidate will also be passionate about pairing design work with much of the actual “dirty hands” work to ensure that everything works as intended initially and over time. Position Responsibilities: • Member of the Physical Design Engineering team., • Works closely with broader process engineering, controls engineering, and manufacturing teams to create automated processes with an integrated process flow., • Supports and leads the design, manufacturing, installation, and commissioning activities to deliver projects from concept to fully operational in the plant., • Delivers finished designs, detailed drawings, and engineering specifications for supplier bidding, and leads vendor compliance efforts after purchase., • Ability to lead Design Engineering technician(s) to achieve required tasks., • Conducts and participates in technical design reviews, supplier evaluations and internal and external compliance audits to relevant industrial standards (ASTM, ISO etc)., • Perform CAD, FEA, and durability simulations as required of concept designs to provide recommendations for physical prototype candidates, execute testing, and ensure successful commissioning and ongoing operation., • Research and implement automation systems, detailed design, component sourcing, manufacture, and deployment of manufacturing equipment., • Works closely with EHS to ensure that all work is done to ensure world class health and safety, and full compliance with relevant environmental regulations., • Documents all work for seamless handoff to end users, prepares technical reports, and follows all corporate change management procedures., • Lead and support continuous improvement activities to produce ongoing, meaningful improvements to worker safety, process uptime, and product quality., • BS or MS in mechanical engineering, chemical engineering, or related field., • At least 5 years process design and automation experience within a manufacturing environment., • Knowledge in automation of industrial processes and materials handling., • Experience in machine design and testing., • Knowledge of statistical process control, and experience in designing control systems., • Broad knowledge and experience across multiple CAD tools., • Excellent spatial visualization and reasoning skills, with a history of conceiving of successful creative designs for bespoke problems., • Project Management and hands-on approach to projects., • Sound knowledge of Process Safety., • Good understanding of human factors in manufacturing., • Entrepreneurial mindset, with the ability to prioritize and manage multiple concurrent projects. Your Right to Work – In compliance with federal law, all persons hired will be required to verify identity and eligibility to work in the United States and to complete the required employment verification document form upon hire. For Assistance with Application - Alternative methods of applying for employment are available to individuals unable to submit an application through this site because of a disability. Contact Human Resources Department at 702-625-5679; 1700 South Pavilion Center Dr. 8th Floor, Las Vegas, NV 89135 to discuss reasonable accommodation.

Job Description Job description: About the Company Our client is a premier electrical and mechanical contracting firm recognized as one of the largest and most innovative providers in the DFW market. The organization delivers excellence across Industrial/Manufacturing, Oil & Gas, Data Centers, Substations, Aviation, and Healthcare projects through advanced design and engineering solutions. With an in-house team of engineers, project managers, and BIM specialists, they excel in Design-Build, Design-Assist, and Integrated Project Delivery (IPD) methods. Their commitment to precision, safety, and innovation has made them a trusted partner for clients across the region. The companys collaborative culture and focus on professional development ensure a rewarding and dynamic work environment. Position Overview The Lead Engineer – HVAC will lead a team of electrical and HVAC engineers in designing and developing modular building systems and integrated HVAC solutions. This role will be both technical and client-facing, responsible for ensuring high-quality engineering deliverables, managing communications with stakeholders, and driving process improvements within the engineering function. The ideal candidate has a strong background in HVAC systems design, leadership experience, and a passion for innovation within modular and industrial environments. Primary Responsibilities • Lead a team of electrical and HVAC engineers in producing and updating General (G Sheets), HVAC (M Sheets), and Electrical (E Sheets) for Issued for Approval, As-Built, and Closeout Submittal drawing sets., • Serve as the project lead and primary point of contact for clients and internal manufacturing teams., • Attend and lead engineering meetings and calls, providing clear updates on team progress, challenges, and project needs., • Develop and standardize Integrated Manufacturing HVAC designs and HVAC controls for modular e-houses., • Conduct final reviews of drawing sets to ensure compliance with client specifications, project scope, and all applicable codes and jurisdictional requirements., • Verify and validate heat load calculations and ensure proper HVAC equipment sizing for each project., • Create and/or review CFD (Computational Fluid Dynamics) analyses to ensure thermal performance meets design requirements., • Provide technical input and hands-on support in AutoCAD as needed to update or create engineering drawings., • Coordinate with internal engineering disciplines to align HVAC and electrical design requirements., • Keep the Engineering Manager informed on design issues, schedule impacts, and resolutions., • Support the manufacturing/production team by answering technical questions and providing guidance., • Contribute to process improvement initiatives, including workflow mapping, standard work documentation, and process optimization for the engineering team., • Participate in client design meetings, occasional site visits, and industry conferences to maintain technical expertise and professional presence., • Engage with the production floor to observe work, provide feedback, and support a culture of quality and collaboration., • Bachelors degree in Mechanical Engineering, Electrical Engineering, or a related discipline (PE license preferred)., • 5–10 years of HVAC engineering experience, including leadership or project management responsibilities., • Strong working knowledge of AutoCAD; familiarity with Revit, Navisworks, or similar tools a plus., • Proven experience designing HVAC systems for industrial or modular building environments., • Understanding of national and local mechanical/electrical codes and standards., • Experience conducting or reviewing CFD analysis and heat load calculations., • Excellent communication, leadership, and organizational skills., • Ability to work collaboratively across engineering disciplines and with external vendors., • Competitive compensation and comprehensive benefits, • Opportunities for leadership development and career advancement, • Collaborative, team-oriented culture focused on innovation Our client is an Equal Opportunity Employer committed to fostering an inclusive workplace. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex (including pregnancy), sexual orientation, gender identity or expression, age, national origin, disability, veteran status, or any other characteristic protected by applicable law. Job Type: Full-time Benefits: • 401(k), • 401(k) matching, • Dental insurance, • Health insurance, • Paid time off Work Location: In person

Job DescriptionSalary: $36 - $37/hr Thermal Specialties is looking for a Furnace and Boiler Industrial Industrial Heat Treat Technicianfor ourConstruction Servicesdivision in Fort Worth, TX (Head quarters in Tulsa, OK).The purpose of this position is to: 1.) Work with Construction Services peers to effectively execute projects. 2.) Provide expert knowledge in combustion systems to engineering/estimator on new projects. 3.) Work with estimator to establish project budgets and work to attain. 4.) Work to provide minimum downtime to our customers. Role and Responsibilities: • Experience in Electrical, Controls, Industrial Burners and Mechanical., • Work in a safe manner, making sure that all necessary precautions are taken. Maintain diligence in enforcing safety requirements throughout the organization, • Meet or exceed customer requirements for projects. Work with engineering and management to provide feedback when opportunities for improvement arise, • Provide feedback to engineer/estimator when goals are not believed to be attainable. Provide feedback on lessons learned when goals are missed. Work with customers to insure additional work is properly accounted for on invoices, • Provide a preventative maintenance program to insure requirements of heat treat quality system are met. Insure that all equipment is properly and consistently maintained in a pro-active manner, • Make sales calls in person, via phone, or e-mail as necessary to insure close relationships with key accounts. Qualified Candidates must possess: • Preferred(but not required)2 plus years of experience in control and combustion systems, • Ability to work closely with engineering to assist in project bidding/design/improvement activities, • Ability to troubleshoot problems and identify workable solutions, • Education must be a high school diploma or equivalent, • Ability to interface one-on-one with customers to provide solutions and positive relationships., • Valid drivers license Physical Demands: • 50% travel to be expected(in and out of state), • Ability to lift 50 lbs. Must be able to work in extreme high/low temperatures and a physically demanding environment, • Frequently required to stand for long periods of time, • While performing the duties of this job, the employee is regularly required to use hands to finger, handle or feel; reach with hands and arms; and talk or hear, • Specific vision abilities required by this job include close vision, distance vision, color vision, peripheral vision, depth perception and ability to adjust focus Job Type: Full-time Benefits: • Paid Time Off, • Health insurance, • Dental insurance, • Vision insurance, • Short and long-term disability, • Life insurance, • 401K & Roth (matching available), • Flexible Spending Account, • Employee Assistance Program

A leading engineering firm is seeking a Thermal-Hydraulic Analysis Engineer in Fort Worth, TX or remotely. Candidates must have a Bachelor's Degree in engineering and relevant experience, with skills in nuclear safety analysis and thermal-hydraulics.

Develop technical proposals and support business development as required #LI-SH7 Qualifications Bachelor's Degree in Nuclear Engineering, Mechanical Engineering, Chemical Engineering, or related engineering degree Mid level requires 3+ years of experience of safety analysis work in a nuclear environ

Qualifications Bachelor’s Degree in Nuclear Engineering, Mechanical Engineering, Chemical Engineering, or related engineering degree. Overview Join ENERCON's Nuclear Services Group as a Thermal‑Hydraulic Analysis Engineer. You will work in a multi‑disciplinary Engineering & Safety Analysis te

Thermal-Hydraulic Analysis Engineer to support nuclear safety analysis and licensing. A leading engineering firm in the U.

Job Title: Mechanical Engineer. This position involves both hands-on technical work and leadership responsibilities, including overseeing systems engineering teams and providing technical project management. Providing oversight and management of systems engineering teams, ensuring that projects stay

The Distribution Project Manager (DPM) is responsible for the performance of work and oversight of all contract matters relating to daily operations of this contract.The DPM ensures and oversees all work requirements to ensure professional and quality services are provided to the Customer IAW Amentu

Are you an experienced engineer or technical professional with the curiosity, initiative, and drive to transition from hands-on engineering into project and portfolio management?. Step into a leadership role and gain direct experience in shaping engineering projects, guiding technical teams, and con

Fort Worth, TX (onsite 5 days a week).Please note that candidates must have all three:.Pharma, Manufacturing and Construction.Construction Project Management.Project Management in a working GMP manufacturing site.Strong financial acumen (budget control, reporting, forecasting).Project management res

Provide engineering services support to including Spec writing, design, mechanical calculations, outfitting design, marine drawing and work item development, selected record drawing (SRD) updates, cost estimates, ship checks and other technical work document preparation in accordance with drawing st

You will work closely with project managers, engineers, and other stakeholders to ensure that all projects are completed on time and within budget. Collaborate with project managers, engineers, and other stakeholders to understand project scope and requirements. Bachelor's degree in Construction Man

The process engineer role leads the design, optimization, validation, and continuous improvement of complex manufacturing processes in regulated environments such as nutritional production. Bachelor's degree in Business Administration, Engineering, Operations Management, or a related field (Master's

A Bachelor's degree in Mechanical Engineering, Aerospace Engineering, or a related field. A minimum of 7 years of experience in propulsion engineering or a related field. Propulsion Engineer - Cutting Edge Space & Defense Products!.

Coordinate across engineering, construction, and vendor partners. Background in construction, infrastructure, or engineering.

This Jobot Job is hosted by: Kevin Shilney.Are you a fit? Easy Apply now by clicking the "Apply" button and sending us your resume.Salary: $60,000 - $80,000 per year.We are a respected law firm focused on probate, estate planning, business transactions, and civil/commercial litigation.Our

This company is looking for PREMIER candidates to fill their open position of.We are partnered in helping a growing and well-established commercial restoration company find qualified and talented individuals like yourself.They are interested in highly-motivated and proactive individuals to fill thei

A Bachelor's degree in Mechanical Engineering, Aerospace Engineering, or a related field. A minimum of 7 years of experience in propulsion engineering or a related field. To be considered for the role of Propulsion Engineer, you must possess the following qualifications:.

You will work closely with project managers, engineers, and other stakeholders to ensure that all projects are completed on time and within budget. Collaborate with project managers, engineers, and other stakeholders to understand project scope and requirements. Bachelor's degree in Construction Man

Coordinate with owners, general contractors, architects, engineers, and trade partners. Lead and mentor project teams, including project managers, engineers, and field leadership.

Owner's Representative, general contractor, or architecture/engineering firm setting. Bachelor’s degree in Construction Management, Engineering, Architecture, or a related field OR equivalent experience.

Serve as the primary point of contact onsite, coordinating between security integrators, electricians, engineers, and stakeholders.

A leading engineering firm in the U. This role involves overseeing high voltage transmission projects, including budget management, engineering coordination, and stakeholder collaboration.

Knowledge of AutoCAD/ Prelim Engineering - 2 Years Preferred.

Tarvos Talent is looking for a Project Manager for a fantastic client in the South Austin area.The ideal candidate will be responsible for planning, coordinating, and implementing projects within the decided-upon budget, timeline, and scope.They will also effectively monitor and present project upda

Oversee project design and coordinate internal and external engineering resources.

NOW HIRING: Underground Wet Utilities Project Manager.Leadership Opportunity | Profit Share | High-Growth Team.Underground Wet Utilities Project Manager.This isn’t just another PM role.This is an opportunity for someone who wants.What Makes This Opportunity Different.Profit sharing for Project Man

Join this premier home builder who, for over a decade, has set the standard for the Luxury Home space in DFW! Their projects have been featured in D Magazine, Luxe Interiors + Design, Dallas Modern Luxury, The Scout Guide, and D Home.You will manage projects from the office in.Dallas proper, Preston

Create and Manage Design, Engineering, Materials, Manufacturing and Installation timelines. Project Manager, pre-engineered structures, Manufacturing, Specifications, Estimating, subcontractor coordination, ERP systems, safety compliance, project execution.

Join this premier home builder who, for over a decade, has set the standard for the Luxury Home space in DFW! Their projects have been featured in D Magazine, Luxe Interiors + Design, Dallas Modern Luxury, The Scout Guide, and D Home.You will manage projects from the office in.Dallas proper, Preston

Bachelor’s degree in Business, Engineering, Construction Management, or related field.

Support coordination of project design with internal and external engineering teams.

Project Manager III- Construction.Fort Worth, TX (onsite 5 days a week).Working Hours: Monday - Friday: 8:00AM-17:00PM CST some hours may be required outside of this window as business/project needs arise.Construction Project Management.Project Management in a working GMP manufacturing site.Strong f