Verify jobs in Buffalo, New YorkCreate job alerts

Job Description Graduate Nurse (GN) Shift: Full and Part-Time Rate: $31.00/hr. Job Description: The Graduate Nurse (GN) promotes the health, wellness, & illness prevention of residents through an array of daily nursing and personal care endeavors. A GN works under the direction of a Registered Nurse and must be ready to handle a diverse range of tasks and responsibilities. These responsibilities include administering treatment or medications, performing clinical procedures, and documenting the clinical data of patients. Responsibilities: • Responsible for the care and safety of all patients/residents on the nursing unit, ensuring that individual care plans are current, implemented and revised as necessary., • Administers and documents medications, treatments and other nursing services to ensure that the medical record reflects progress and the current condition of the patient/resident., • Ensures that the medical record reflects progress and the current condition of the resident at all times., • Receives report from the off going team leader/nursing supervisor, makes rounds to verify the needs of the residents., • Ensures that the designated representative is notified of any change in the patient/residents condition or plan of care., • Ensures that the physician is informed on any change in the patient/residents condition, abnormal lab results, diagnostic test results, consultant recommendations, etc., • Reports pertinent information regarding patients/residents to the oncoming team leader/nursing supervisor., • Possesses knowledge of the facility’s policies and procedures, abides by these policies, ensures that the staff is informed of and correctly carries out these policies. include, but are not limited to:, • Maintains HIPAA privacy, security and confidentiality standards., • Minimum 18 years of age; high school diploma or equivalent preferred, • A graduate nurse currently eligible for licensing in the State of New York, who possesses an appropriate level of education, training, and experience to fulfill all requirements/duties of the position, • No findings or convictions of resident abuse, mistreatment, and misappropriation of property, • Strong written and verbal communication skills; able to follow written and verbal instructions, • Able to work well with and show respect towards fellow staff members, physicians, residents, and family members, • Caring and compassionate bedside manner, • Paid Time Off (PTO), • Health, Vision, and Dental Insurance, • Life Insurance, • Referral Bonus Program, • Tuition Support, • Weekly or Same Day Pay Options

Job DescriptionPower-Flo Technologies is seeking a Mechanic Helper to join the team at our Buffalo Pump and Motor Repair shop. This role is to assist the Mechanics in the cleaning, painting, testing, binning, partially disassembling of AC/DC motors and pumps. Mechanic Helper Essential Responsibilities • Assist in the maintenance of service truck tools, safety equipment, instruments, and materials, specific to pump, motor, and equipment maintenance and repairs., • Assist mechanics with the disassembly of pump and motor assemblies., • Cleaning Parts using a sandblaster and air tools., • Keep shop areas clean from debris., • Assist in the maintenance of required stock of pumps, parts, fittings, pipe and related material on the service truck., • Performs cleaning, lubricating of tools as required., • Performs duties in a professional manner and works well with others or in a team setting., • Establishes and maintains cooperative working relationships with co-workers, outside agencies, and the public., • Regular attendance and adherence to prescribed work schedule to conduct job responsibilities., • Observes safe work practices and safety methods; performs other duties as assigned. Mechanic Helper Necessary Qualifications • High School diploma, GED equivalent, or Trade School Diploma., • Read, interpret, and work from sketches, books, blueprints, and specifications or willingness to learn., • Familiar with various hand tools., • Familiar with power tools such as impact guns, cut off wheels, and drills., • Positive attitude and willingness to learn., • The employee must regularly lift and/or move more than 25 pounds, frequently lift and/or move more than 50 pounds, and occasionally lift and/or move in excess of 100 pounds., • Must have a valid and clean driver's license to operate company vehicles. Physical Requirements • Ability to Stand for 8 Hours, • Ability to lift 50 pounds, • Ability to work on elevated platforms, • Ability to climb ladders Competitive Benefits Package • Health insurance (medical, dental, vision), • PTO program and paid holidays Salary Range: Between $16 - $18/hour We are an equal opportunity employer. Applicants must be authorized to work for ANY employer in the US. We are unable to sponsor or take over sponsorship of employment Visa currently. Power-Flo Technologies and its subsidiaries participate in the USCIS E-Verify Program to verify that all new hires are authorized to work in the United States. Power-Flo Technologies is a unique Family of Companies consisting of distributors, fabricators, manufacturers and motor and pump repair firms serving the New York metropolitan and New England areas. We are a Master Distributor and Manufacturers Representative with REAL SYSTEMS SOLUTIONS.

Job Description One of the largest Facility Maintenance providers in North America is hiring! Pritchard Industries is a dynamic and innovative provider of comprehensive facility services, dedicated to enhancing the operational efficiency of our client partners in the industries we serve. With services from facility maintenance and janitorial to landscaping and snow removal, we enable desired outcomes for our clients through consistent service and outstanding people. We are seeking a highly motivated and experienced Landscaper-Snow Removal crew member to join our team. If you meet all the qualifications below, please apply. Qualifications: • Self-motivated, hardworking, dependable, responsible and team player., • Experience in Landscaping. Will train the right employee., • Ability to work in all weather conditions, • Must be able to lift 50lb and above., • Ability to work extended hours and meet the physical demands of our work., • Ability to drive company vehicles and equipment, • Salary: $20.00-$22.00/Per Hour, • Full Time 6am - 4:30pm Monday - Thursday, • Opportunity for overtime, • Paid Holidays and vacation time, • Opportunity for growth, • 401K After One Year Employment, • Medical Insurance Full Time Employees Pritchard Industries participates in E-Verify. EEO Notice: Pritchard Industries is an Equal Opportunity Employer and will consider all qualified applicants without regard to race, color, creed, genetic information, religion, national origin, ethnicity, gender; gender identity, sexual orientation, pregnancy, childbirth or related medical condition, age, disability, or handicap, servicemember status, relationship or association with a protected veteran, and any other category protected by Federal, state, or local law. #LI-DNI

Pay Range: (Specific to NY,CA,CO,WA,MD,CT,IL,NV,,KY,MI,NJ,ME,MO,MA,MT) $20.43 - $24.41 Hourly About Brink's: The Brink's Company (NYSE:BCO) is a leading global provider of cash and valuables management, digital retail solutions, and ATM managed services. Our customers include financial institutions, retailers, government agencies, mints, jewelers, and other commercial operations. Our network of operations in 51 countries serves customers in more than 100 countries. We believe in building partnerships that secure commerce and doing that requires fostering an engaged culture that values people with different backgrounds, ideas, and perspectives. We build a sense of belonging, so all employees feel respected, safe, and valued, and we provide equal opportunity to participate and grow. Job Description Who We Are: Brink's U.S., a division of Brink's Incorporated, is the trusted leader in armored transportation, currency processing, ATM services, and secure logistics for banks, retailers, and government clients. We take pride in offering our employees meaningful career growth and advancement opportunities. As a Vault Processor, you'll handle, secure, and process large volumes of cash and valuables within Brink's vaults. This position plays a key role in maintaining the flow of currency between financial institutions and commercial clients, with a strong emphasis on accuracy, security, and team collaboration. Key Responsibilities: • Securely manage vault operations and protect assets, • Prepare, verify, and process cash shipments and deposits, • Record and report all transactions with accuracy, • Enter liability and inventory data into tracking systems, • Monitor machinery and workflows, • At least 21 years old, • Able to lift up to 50 lbs, • Proficient in data entry, • Experience with vault operations or cash handling, • Military background, • Access to benefits after 30 days of employment! Medical, Dental, Vision, 401K, Paid Holidays & Vacation Hours (For Full Time positions). Link to our benefits: brinksbenefits.com, • Uniforms and protective gear provided What's Next? Thank you for considering applying for a job at Brink's. To be considered for this position, you must complete the entire application process, which includes answering all prescreening questions and providing your eSignature. Upon completion of the application process, you will receive an email confirming that we have received your application. We will review all candidates and notify you of your status should we deem you fit for a job. Thank you again for your interest in a career at Brink's. For more information about future career opportunities, join our talent network, like our Facebook page or Follow us on X. Brink's is an equal opportunity/affirmative action employer, and all qualified applicants will receive consideration for employment without regard to race, color, religion, sex, national origin, disability status, marital status, protected veteran status, sexual orientation, gender identity, genetic information, or history or any other characteristic protected by law. Brink's is also committed to providing a drug-free workplace. We are an Equal Opportunity Employer and do not discriminate against any employee or applicant for employment because of race, color, sex, age, national origin, religion, sexual orientation, gender identity, status as a veteran, and basis of disability or any other federal, state, or local protected class.

Pay Range: (Specific to NY,CA,CO,WA,MD,CT,IL,NV,,KY,MI,NJ,ME,MO,MA,MT) $18.53 - $22.14 Hourly About Brink's: The Brink's Company (NYSE:BCO) is a leading global provider of cash and valuables management, digital retail solutions, and ATM managed services. Our customers include financial institutions, retailers, government agencies, mints, jewelers, and other commercial operations. Our network of operations in 52 countries serves customers in more than 100 countries. Brink's has been a trusted partner in securing commerce for more than 165 years. Together, every Brink's Team Member is committed to providing the highest levels of service and support to our customers. We take pride in our work, and we share a passion about our future. Learn why so many people have made the choice to join our team - and stay here. We believe that our team should be reflective of the customers we serve every day around the world. We believe in building partnerships that secure commerce and doing that requires fostering an inclusive culture that values people with diverse backgrounds, ideas, and perspectives. We build a sense of belonging, so all employees feel respected, safe, and valued, and we provide equal opportunity to participate and grow. Job Description Who We Are: Brink's U.S., a division of Brink's, Incorporated, is the premier provider of armored car transportation, currency and coin processing, ATM servicing and other value added services to financial institutions, retailers and other commercial and government entities. The company has a proud history of providing growth and advancement opportunities for its employees. We have a challenging opportunity for a Cash Logistics Processor. Who You Are: You are interested in being the backbone of modern finance by connecting banks and businesses around the world with solutions that keep them moving forward. We take pride in being the ones totaling the day's balance and offering new solutions that make our teams more efficient. Our Cash Logistics Processors enjoy a casual working environment and high-responsibility work that keeps ATMs filled and businesses running fluidly. The Cash Logistics Processor Role: In branch locations around the world, we're doing the critical cash accounting work that keeps modern commerce moving. Our work is essential, so our team members are essential. We verify bank deposits, prepare cash shipments and connect money from one place to the next. We do it because it makes us proud - #BrinksProud. As a Cash Logistics Processor at Brink's, you'll work within our branch locations to account for the cash and valuables we transport to banks and businesses worldwide. This position requires the enforcement of rules to protect the premises and property of Brink's and its customers, as well as the safety of persons on the premises of Brink's and its customers. Key Responsibilities: • Check in all work and cash through window, • Verify cash, perform data input into iTrack, mix and check for all deposit types including check only, CompuSafe, ATM, Recyclers and mixed, • Process check imaging into FIS system, • Balance all individual teller sells, • Validate bulk pull and fill each order by packing slip., • Complete checklist according to established deadlines for each major function throughout the day, • Clean off stations at end of day, bundle trash according to specified procedure, sort deposit slips, ensure no work is remaining, print check manifest and make sure deposits match, • Ensure all imaged work and teller paperwork is delivered to the appropriate areas and/or filed appropriately, • Follow any direction provided by supervisor and/or manager The Qualifications You Must Have: • 18 years old or older, • Minimum of 3 months experience in any cash handling, inventory control, deposit processing, vault processing, account reconciliation, ATM processing environments or being a Cashier or Teller, • Ability to lift 50 lbs., • Ability to satisfactorily complete and maintain all required internal training applicable to the position. The Additional Qualifications We Prefer: • Cash handling experience in secure logistics or banking industry, • Basic computer skills, • 10 Key experience, • HS diploma or GED Professional Skills: • Professional, positive demeanor, • Excellent customer service, • High attention to detail, • Collaborative work style, • Good ethics and integrity If you have the background and integrity we require and are looking for a challenging opportunity, we hope you will consider employment with Brink's U.S. Brink's provides an outstanding total compensation package for this position. In addition to a competitive salary, we offer to eligible employees, medical, dental, vision, and life insurance plans. We also offer a 401(k) Plan with company match. If you are interested and meet the requirements for this position, please apply. Brink's, Incorporated is an Equal Opportunity / Affirmative Action Employer, and is committed to maintaining a drug-free workplace. What's Next? Thank you for considering applying for a job at Brink's. To be considered for this position, you must complete the entire application process, which includes answering all prescreening questions and providing your eSignature. Upon completion of the application process, you will receive an email confirming that we have received your application. We will review all candidates and notify you of your status should we deem you fit for a job. Thank you again for your interest in a career at Brink's. For more information about future career opportunities, join our talent network, like our Facebook page or Follow us on X. Brink's is an equal opportunity/affirmative action employer, and all qualified applicants will receive consideration for employment without regard to race, color, religion, sex, national origin, disability status, marital status, protected veteran status, sexual orientation, gender identity, genetic information, or history or any other characteristic protected by law. Brink's is also committed to providing a drug-free workplace. We are an Equal Opportunity Employer and do not discriminate against any employee or applicant for employment because of race, color, sex, age, national origin, religion, sexual orientation, gender identity, status as a veteran, and basis of disability or any other federal, state, or local protected class.

Job Description Applebee's started with the same philosophy we follow today - focused on serving good food to good people! T.L. Cannon is the owner / operator of 53 Applebee’s Neighborhood Grill & Bar restaurants. The foundation of success is our Team Members, who bring remarkable industry experience to the table. As a team, we have an unparalleled commitment to exceed our guest’s expectations and maintain the highest standards of service, quality, and value for our neighbors. What’s in it for you? We can offer you: • Competitive wages, • Fantastic Bonus Potential, • Health/dental/vision coverage (contributory), • Paid vacation time, • Life Insurance, • 401(k) We offer a fun environment where real connections and friends are made! OUR PRINCIPLES: • Respect your team; treat them as you would like to be treated., • Integrity is everything, act as an owner. In this RM role, you will manage restaurant front of house / service teams along with department manager roles and duties working as a member of the restaurant management team. We are a Franchisee of Applebee's and an Equal Opportunity / E-Verify Employer. We use eVerify to confirm U.S. Employment eligibility.

Job DescriptionCompany Overview: GTI specializes in the design, engineering, fabrication, and deployment of custom modular structures, shipping container-based structures, and ballistic metal fabrication. We serve multiple industries, including DOD contractors, military, disaster relief, and commercial markets. Our containerized and modular solutions are all built in-house at our factory in Buffalo, NY. Manufacturing capabilities range from military training, live fire enclosures, bathroom/shower units, expeditionary camps, medical facilities, water treatment, electrical/energy storage enclosures, and much more. The GTI team consists of more than 50 professionals spanning from fabrication and engineering to government and military specialists. Our combination of expertise allows us to provide top quality solutions and customer service for various industries and missions. The Welder/Fabricator at GTI will receive their daily tasks and responsibilities from their working lead. Tasks will be centered around the assembly of materials to create a finished product in accordance with Customer specifications. The individual will be responsible for always maintaining a safe work environment, as well as reading blueprints and schematics for product design. Daily Responsibilities: • Work detail drawings fit-up piece parts in fixturing fit, tack and weld piece parts according to detail drawings with components consisting of steel channels, brackets, angles, sheathing, assemblies and sub-assemblies., • Tack welds all parts together in equipment, ensuring all dimensions are correct to specified drawings., • Weld complete assembly according to specified welding standards., • Correct fabrication mistakes., • Incorporate approved design changes where necessary., • Fabricate shop fixtures as required by assembly personnel per engineering sketch., • Meet production schedule, quality and planned labor hours with limited supervision., • Utilization of hand and power shop tools., • Understand and apply minimally these forms of welding, carbon steel, stainless steel, low alloy., • Normally receives basic instructions on routine tasks and detailed instructions on new assignments., • Read blueprints and drawings and take or read measurements to plan layout and procedures., • Determine the appropriate welding equipment or method based on requirements., • Set up components for welding according to specifications (e.g. cut material with powered saws to match measurements)., • Operate angle grinders to prepare the parts that must be welded., • Align components using calipers, rulers etc. and clamp pieces., • Weld components using manual or semi-automatic welding equipment in various positions (vertical, horizontal or overhead)., • Repair machinery and other components by welding pieces and filling gaps, • Test and inspect welded surfaces and structure to discover flaws., • Maintain equipment in a condition that does not compromise safety.Requirements:, • Proven experience as welder., • Experience using a variety of welding equipment and procedures (TIG, MMA etc.)., • Experience in using electrical or manual tools (saws, squares, calipers etc.)., • Ability to read and interpret technical documents and drawings., • Knowledge of relative safety standards and willingness to use protective clothing (face-shield, gloves etc.)., • Deftness and attention to detail.Additional Qualifications:, • General mechanical background., • Ability to use hand tools and welding tools safely., • Minimum of 1 year experience in mechanical assembly, AWS certification (American Welding Society) for welding of carbon steel using GMAW process position 3G, Vertical up and 4F overhead., • Able to work with limited supervision and follow instructions., • Able to work as a team member in group situations., • Fully understand manufacturing drawings, able to verify dimensions., • Understand tolerance systems., • Complete shop order documentation and time sheets., • Meet internal Company standards for quality and workmanship, • Expected to contribute and maintain conditions that will ensure a healthy and safe working environment., • Working knowledge of torch and plasma equipment., • Working knowledge of GTAW Welding., • Ability to apply workmanship standards and understand and carry out instructions furnished in written, oral or diagram form., • Able to perform basic tasks independently, limited supervision and in a group setting.GTI Fabrication is committed to equal opportunity for all, without regard to race, religion, color, national origin, citizenship, sex, sexual orientation, gender identity, age, veteran status, disability, genetic information, or any other protected characteristic.

Job Description QuestMark, a division of CentiMark Corporation, is the nation's largest self performing flooring contractor and the leading provider of polished concrete, epoxy, urethane, and exterior coatings for pedestrian and vehicle spaces in the industrial, commercial, and retail markets. Both family and employee owned, Centimark has been thriving since 1968 and we are still growing and currently hiring. With zero debt and a 5A1 Dun & Bradstreet rating, we are able to offer outstanding benefits including a Field Certification Program for career advancement as well as a Performance Bonus Program. Our employees also have multiple opportunities for recognition through our Safety & Risk Program as well as our Customer Satisfaction Program. The successful candidate for our Epoxy Flooring / Concrete Polishing Crew & Foreman opportunities will demonstrate initiative, be a self-starter with a high level of professional integrity, and have a strong work ethic and competitive drive. QuestMark / CentiMark provides a positive work environment with challenging career opportunities. We also offer competitive compensation and excellent benefits including: • Pay rate of $21-$31/hour dependent upon experience, • Hourly Bonus Program (paid out by job), • Health Insurance (Medical, Dental, Vision), • Life Insurance, • 401(k) Retirement Plan with Company Match, • Employee Stock Ownership Program (ESOP), • Paid Vacation & Holidays, • Field Certification Program for Career Advancement), • Install polished concrete, epoxy, urethane, and hard surface flooring systems, • Ensure strict compliance with all health and safety rules and regulations, • Proper use of equipment and materials, • Strive to meet and exceed any and all production targets, • Concrete polishing, epoxy / urethane flooring, • All candidates must be willing to travel and stay out of town, • Ability to work overnights, Saturdays, Sundays & holidays, • Valid driver’s license & reliable transportation, • 18 years of age or older, • Ability to pass a pre-employment drug screen, • Authorized to work in the United States Powered by JazzHR UARkvBDAFm

Job DescriptionWe are seeking a dependable and detail-oriented Receiving Attendant 1st shift to join our team in Tonawanda, NY. The Receiving Attendant plays a key role in ensuring the smooth flow of materials into our facility. This position is responsible for inspecting incoming shipments, verifying documentation, recording deliveries in inventory systems, and coordinating with other departments to keep operations running efficiently. Key Responsibilities • Verify contents of shipments against purchase orders, packing slips, and other documentation., • Inspect goods for damage, shortages, or quality concerns; escalate issues as needed., • Accurately record all receipts in inventory management systems., • Tag, label, and stage materials for storage or direct distribution to departments., • Collaborate with the Crib Attendant, Warehouse, and Maintenance teams to ensure accurate stocking and timely part availability., • Use Microsoft Excel for tracking, reporting, and documentation., • Assist with cycle counts, physical inventories, and maintaining stock accuracy., • Maintain cleanliness and organization in receiving and storage areas., • Operate forklifts, pallet jacks, or other material handling equipment (training/certification provided if required)., • High school diploma or equivalent., • Prior experience in shipping/receiving, warehouse, or inventory roles., • Strong attention to detail and organizational skills., • Basic computer skills; proficiency with Microsoft Excel., • Good communication and teamwork skills., • Ability to stand, walk, bend, and lift up to [X lbs] throughout a shift., • Familiarity with SAP or other Warehouse/Inventory Management Systems (WMS)., • Forklift certification or willingness to obtain., • On-site, in Tonawanda, NY., • Work involves handling shipments, and frequent lifting., • Ideal Setech, LLC is an equal opportunity employer and complies with all laws prohibiting discrimination on the basis of such factors as race, color, age, sex, national origin, religion, citizenship, handicap, height, weight and marital status. Under the State Persons with Disabilities Act and the Federal Americans with Disabilities Act, an employer has a legal obligation to accommodate an employee’s or job applicant’s disability unless the accommodation would impose an undue hardship on the employer. A person with a disability may allege a violation against an employer regarding a failure to accommodate his or her condition under Michigan law only if the person notifies the employer in writing of the need for accommodation within 182 days after the date the person knew or reasonably should have known that an accommodation was needed.

Job DescriptionCentiMark Corporation currently has an exceptional opportunity for an experienced commercial roofing Production Foreman in Buffalo, NY. We offer competitive wages, solid career opportunities, a large backlog of work & fantastic growth potential. This position is offering $25 - $40 plus outstanding benefits! Job Summary: Will lead and train a crew of 5 to 6 people with field applications. Work with the field supervisor to communicate with customers and management. Responsible for paperwork, time sheets and ensuring CentiMark safety policies are being followed. • Year-round work is available, • The majority of our workforce has been with us over 5 years, • Immediate interviews are available, • We pride ourselves on offering lucrative employee referral bonuses, • Minimum of two (2) or more years’ experience in Commercial Roofing, • Working knowledge of commercial/industrial roofing procedures and safety, • Experience with commercial roofing systems: EPDM, BUR, Foam, Acrylic, Shingles, TPO, PVC, Mod. Bit. & Metal Roof Repairs, • A valid state driver’s license (in good standing); Have reliable transportation, • Able to lift 50 lbs. & climb up and down ladders to minimum heights of 25 feet, • 2 Health Insurance Plans:, • Free “Core Plan” – Free Medical & Dental, • “Buy Up Plan” – Features a lower deductible for Medical, • Vision Plan, • Free Life Insurance and AD&D Insurance, • Traditional 401K with Company Match, • Roth IRA with Company Match, • Paid Holidays and Vacation, • Flexible Spending Account (FSA), • Employee Stock Ownership Program (ESOP) CentiMark provides a great work environment with challenging career opportunities. Drug Free Workplace - EOE (M/F/V/D) - E-Verify Employer For more information, please visit our website -- Powered by JazzHR vHukHGb2Ch

Job Description QuestMark, a division of CentiMark Corporation, is the nation's largest self performing flooring contractor and the leading provider of polished concrete, epoxy, urethane, and exterior coatings for pedestrian and vehicle spaces in the industrial, commercial, and retail markets. Both family and employee owned, Centimark has been thriving since 1968 and we are still growing and currently hiring. With zero debt and a 5A1 Dun & Bradstreet rating, we are able to offer outstanding benefits including a Field Certification Program for career advancement as well as a Performance Bonus Program. Our employees also have multiple opportunities for recognition through our Safety & Risk Program as well as our Customer Satisfaction Program. The successful candidate for our Epoxy Flooring / Foreperson opportunities will demonstrate initiative, be a self-starter with a high level of professional integrity, and have a strong work ethic and competitive drive. QuestMark / CentiMark provides a positive work environment with challenging career opportunities. We also offer competitive compensation and excellent benefits including: • Pay rate of $21-$31/hour dependent upon experience, • Hourly Bonus Program (paid out by job), • Health Insurance (Medical, Dental, Vision), • Life Insurance, • 401(k) Retirement Plan with Company Match, • Employee Stock Ownership Program (ESOP), • Paid Vacation & Holidays, • Install polished concrete, epoxy, urethane, and hard surface flooring systems, • Ensure strict compliance with all health and safety rules and regulations, • Proper use of equipment and materials, • Strive to meet and exceed any and all production targets, • Concrete polishing, epoxy / urethane flooring, • All candidates must be willing to travel and stay out of town, • Ability to work overnights, Saturdays, Sundays & holidays, • Valid driver’s license & reliable transportation, • 18 years of age or older, • Ability to pass a pre-employment drug screen, • Authorized to work in the United States Powered by JazzHR E8j5IPIUSs

Job DescriptionPower-Flo Technologies is seeking to hire a full-time laborer that can support our pump and motor repair shop in Buffalo, NY. Laborer Responsibilities Assist with the following: • Disassemble pumps and electric motors to determine cause of failure and what is required to repair., • Install replacement bearings, seals, shafts, and gaskets on various equipment., • Troubleshoot pump systems in the field using a multimeter., • Make repairs in the field to pumps, motors, and fans., • Use power tools, hand tools, and multimeter to repair pump system in the field., • Work with a helper to complete repair jobs both in shop and on the road., • Replace and wire electric motors at job sites., • Perform troubleshooting of pump sets and simple controls (motor starters). Laborer Necessary Qualifications • Ability to work independently and in a team setting, • Basic knowledge regarding use of a PC, • Experience using all types of mechanics tools., • Competent with the use of electrical test equipment, i.e. Multi meter, shop tools, hand tools, pneumatic tools, hoists, etc., • Ability to troubleshoot problems and independently repair., • Knowledge of alignment techniques., • Ability to troubleshoot systems in house and in the field., • Familiar with the installation, service, and maintenance of various pumps and motors., • A plus if familiar with submersible pumps, close-coupled pumps, frame mount pumps, split case pumps, AC motors, etc., • A valid and clean driver's license to operate company vehicles as needed Physical Requirements : • Ability to stand for up to 8 Hours., • Ability to lift 50 pounds., • Ability to work on elevated platforms., • Ability to climb ladders., • This position may require standing, stooping, bending, kneeling, crouching and/or reaching., • You may be exposed to dust, loud noises, and hot and cold conditions., • Good hand-eye coordination and fine motor skills may be required for hand tools, power tools, and other machinery. Salary Range between $15.50 - $18/hour Competitive Benefits Package • Health insurance (medical, dental, vision), • PTO program and paid holidays, • 401K Learn more about us here: Follow us on LinkedIn: About Us We are an equal opportunity employer. Applicants must be authorized to work for ANY employer in the US. We are unable to sponsor or take over sponsorship of employment Visa currently. Power-Flo Technologies and its subsidiaries participate in the USCIS E-Verify Program to verify that all new hires are authorized to work in the United States. Power-Flo Technologies is a unique Family of Companies consisting of distributors, fabricators, manufacturers and motor and pump repair firms serving the New York metropolitan and New England areas. We are a Master Distributor and Manufacturers Representative with REAL SYSTEMS SOLUTIONS.

Job Description Responsibilities Ready for a career change or just starting out? A role as a Rush Technician is a dynamic and fulfilling next step! Rush Truck Centers is the largest network of commercial vehicle dealerships across the US. Whether you're a recent graduate eager to kickstart your career or an experienced & certified Diesel Technician seeking a new path, we are looking to welcome you to our team! With more than 200 locations and nearly 8,000 dedicated employees, Rush Enterprises operates Rush Truck Centers—the largest network of commercial vehicle dealerships in North America—committed to delivering exceptional customer service, personalized support, and comprehensive solutions tailored to every fleet’s needs. Responsibilities: • Provide technical service to vehicles and equipment., • Perform general and detailed repair of all trucks, engines and components., • Overhaul gas or diesel engines., • Install injectors, pistons, liners, cam shafts, cylinder heads, rod and main bearings, oil pans, clutches, fan hubs, differentials, fifth wheels, brakes, change or recharge batteries, and replace transmissions and other parts., • Read job order, observe and listen to vehicle in operation to determine malfunction and plan work procedures., • Examine protective guards, loose bolts, and specified safety devices on trucks, and make adjustments as needed., • Lubricate moving parts and drive repaired vehicle to verify conformance to specifications., • Tag all warranty parts and returns to warranty clerk., • Attend training classes and keep abreast of factory technical bulletins., • Competitive starting salary, • Shift Premiums-In dealerships with multiple shifts, • Career stability, • Opportunity for growth, • Continued training on a variety of OEM equipment, • Advanced vehicle maintenance technology, • Performance Evaluation: From 120days to Every 6 month Basic Qualifications: • High school diploma or general education degree (GED), • 5 years’ experience as a Class 7 & 8 technician in a dealership or related truck service facility, • Valid driver license (CDL a plus!), • We offer an exceptional Total Rewards package with outstanding healthcare benefits, a robust 401(k) plan with company matching, and an employee stock purchase program to help you build long-term financial security. Additionally, we provide performance-based incentives and opportunities for professional growth through ongoing training and development. All of this is within a culture that values and rewards excellence, a positive attitude, and integrity, ensuring you thrive personally and professionally. Equal Opportunity Employer Minorities/Women/Protected Veterans/Disabled This job posting does not state or imply that these are the only duties to be performed by this employee. The employee will be required to follow any other instructions and to perform any other duties requested by their leader.

Job Description Job Title: Cable Technician Location: Buffalo, NY Pay rate: $20 - $26 Company Summary: Our client is a proven leader in the communications industry, offering a professional level of cabling expertise to their partners. Having been around for over forty years, our client provides the resources necessary for their team members to excel and reach their career goals in the communications industry. Position Summary: Anistar is seeking experienced Cable Technicians for a long term contract opportunity to provide assistance with the installation, termination, and testing of various types of voice and data cables. Job Responsibilities: • Working at the new Buffalo Bills stadium, • Mounting Frames, • Pulling, testing, and terminating cables, • Installing ladder racks, • Installing fiber protection systems, • Powering up fuse panels, • Total of 150 frames, • 50 frames get fuse panels Anistar Technologies is an Equal Opportunity Employer and is dedicated to fostering diversity in the workplace. Anistar utilizes E-Verify. Interested Candidates, click “Apply”, or contact the Anistar office at the number listed below. Contact: Anistar Technologies PH: (800)-257-5597 Fax: 888-293-5055 #THO

Job Description This is a second shift salaried position: 3:00 pm - 11:30 pm. SPECIAL SKILLS: Minimally 3 years Sanitation experience in a food processing facility, preferably in a lead or supervisory role. Knowledge of operation processes for smokehouses is preferable. Able to read, file reports, document verification and validation Ability to train associates on company procedures LEADERSHIP DUTIES Responsible for supervising all second shift processes. Reviews production schedule for needs and accuracy Directly supervises and follows up on scheduled work with all employees in assigned areas of responsibility Ensures equipment availability, rotation and proper operation throughout the shift Responsible for understanding, communicating, implementing and encouraging active participation in company Safety policies. Initiates, facilitates, and follows up all Continuous Improvement opportunities with all supporting departments. Monitors and communicates performance, strengths and weaknesses of employees in his/her area of responsibility and develops and leads employees with on-going training Works toward solving problems, differences and disputes GENERAL DUTIES AND RESPONSIBILITIES: Maintain, update and review Sanitation Manual. Inspect and verify cleanliness of equipment prior to sanitizing. Schedule associates to effectively clean all areas of the production facility Manage the SSOP and Master Sanitation systems to ensure that all tasks are completed according to the schedule Ensure all areas and machinery in department are clean and properly sanitized Tour area frequently to insure employees are performing their work properly and also to insure employee morale. Responsible for understanding, communicating, and following Company Good Manufacturing Practices (GMP’s), Personal Protective Equipment (PPE), Standard Operating Procedures (SOP’S) and Sanitation Standard Operating Procedures (SSOP’s) during operations Order and inventory all Sanitation Chemicals and Supplies Read and interpret documents, instructions, safety rules, operating and maintenance instructions and procedure manuals Calibrate thermometers to insure temperature consistency Company DescriptionSahlen Packing Co. is a family-owned business founded in 1869 in Buffalo, New York. We are dedicated to offering customers the freshest and highest quality meat products. Over the years, we have expanded our state-of-the-art processing facility to meet customer demands and now offer our premium meat products in over 25 states. As we celebrate over 150 years of doing business, we continue to prioritize providing our customers with the finest products available. Sahlen's is actively engaged in the Western New York Community.Sahlen Packing Co. is a family-owned business founded in 1869 in Buffalo, New York. We are dedicated to offering customers the freshest and highest quality meat products. Over the years, we have expanded our state-of-the-art processing facility to meet customer demands and now offer our premium meat products in over 25 states. As we celebrate over 150 years of doing business, we continue to prioritize providing our customers with the finest products available. Sahlen's is actively engaged in the Western New York Community.

Job Description Construction Estimator: The selected candidate will expedite timely, accurate cost budgets for projects in a standardized CSI format utilizing historical data, unit pricing, subcontractor/vendor proposals and methods discussed with management. Obtain, distribute, and manage plans or specifications as directed by supervisor for proposed projects. Accurately prepare detailed cost estimates of all aspects of a proposed project including but not limited to quantity take off, detailed cost estimate, line item and subcontractor summary by division. Review and defend the summarized budget with supervisor. Maintain all unit prices and keep current in estimating programs and templates. Adjust unit prices in the system as the market adjusts the prices. Verify existing conditions of vacancies and incorporate found conditions into budget and estimates. Principle Duties & Responsibilities • Prepare detailed cost estimates of all aspects of a proposed construction project including but not limited to quantity take off, detailed cost estimate, line item and subcontractor summary by division., • Work with various departments to establish a scope of work., • Expedite timely, accurate project cost budgets utilizing historical data, unit pricing, subcontractor/vendor proposals and methods as discussed with management., • Obtain, distribute, and manage plans or specifications as directed by supervisor for proposed projects., • Review the summarized budget with supervisor., • Maintain all unit prices and keep current in estimating programs and templates., • Adjust unit prices in the system as the market adjusts the prices., • Construction or other Construction Related Degree or equivalent combinations of technical training and/or related experience is preferred., • 3 to 5 years of commercial estimating experience required, preferably with a general contractor or developer., • Analytical and problem-solving mentality, • Team players, self-motivated, gets along well with supervisors, peers and subordinates., • Capability to plan, prioritize and multitask with meticulous attention to detail within time constraints., • 401(k), • 401(k) matching, • Dental insurance, • Employee assistance program, • Employee discount, • Flexible schedule, • Flexible spending accounts, • Health insurance, • Health savings account, • Life insurance, • Paid time off, • Referral program, • Retirement plan Please note that the final offer amount will be dependent on geographic location, applicable experience and skillset of the candidate.

Job Description Position Summary: GTI Energy is seeking a highly skilled Certified Weld Inspector (CWI) to ensure welded products meet internal standards and customer specifications. This role requires expert knowledge of welding codes, processes, and inspection techniques, playing a critical role in the company’s quality assurance efforts. The CWI will verify compliance, lead inspection activities, support welder certification, and drive continuous improvement in welding operations. Key Responsibilities: • Perform inspections on welded components using visual, dimensional, and non-destructive testing methods in accordance with AWS, ASME, and other relevant codes., • Read and interpret engineering drawings, welding symbols, and technical documentation., • Verify WPS (Welding Procedure Specifications) and PQR (Procedure Qualification Records) compliance., • Conduct and document welder qualification tests and maintain certification records., • Identify welding defects and non-conformities; issue NCRs and support root cause analysis and corrective actions., • Maintain detailed inspection records and contribute to quality reports., • Collaborate with welding, engineering, and production teams to resolve issues and improve processes., • Provide coaching and technical guidance to welders to ensure adherence to quality standards., • Participate in internal and external quality audits. Required: • High school diploma or GED., • Understanding AWS standards. Will train., • 3–5 years of weld inspection experience in a manufacturing environment., • Deep understanding of AWS D1.1, ASME Section IX, and other relevant welding codes., • Proficient in visual inspection and common NDT methods (PT, MT preferred)., • Associate degree or technical training in welding or engineering., • Experience with NDT Level II (UT, RT)., • Ability to stand, walk, bend, and lift up to 50 lbs., • Comfortable working in manufacturing and shop-floor environments with PPE., • May require climbing ladders or accessing confined spaces for inspection.

Job Description Job Summary: We are seeking a detail-oriented and highly organized Mortgage Loan Closer to join our team. In this role, you will be responsible for preparing, reviewing, and ensuring the timely and accurate closing of residential mortgage loans. The ideal candidate will have a strong understanding of mortgage documentation, compliance requirements, and closing procedures, ensuring a smooth transition from underwriting to funding. Key Responsibilities: • Prepare and review closing documents in accordance with loan approval terms, investor guidelines, and regulatory compliance., • Coordinate loan closings with title companies, attorneys, borrowers, lenders, and internal departments., • Verify loan data, including loan amount, interest rate, and fees, to ensure accuracy., • Ensure all closing conditions are met prior to disbursement., • Issue and manage Closing Disclosures (CDs) and final settlement statements., • Perform funding authorization and coordinate disbursement of funds., • Communicate regularly with loan officers, processors, underwriters, and other stakeholders to resolve issues and ensure timely closings., • Maintain complete and accurate loan files in accordance with company and investor requirements., • Keep current on federal, state, and investor regulations related to loan closings., • High school diploma or equivalent required; associate or bachelor’s degree preferred., • 2+ years of mortgage closing experience preferred., • Strong knowledge of residential loan closing documents and procedures (Conventional, FHA, VA, USDA)., • Familiarity with TRID and other applicable compliance regulations., • Experience with mortgage loan origination systems, • Exceptional attention to detail and organizational skills., • Ability to multitask and work under tight deadlines. Hanna Holdings, Inc. affiliates and assigns are committed to providing equal employment opportunity to all employees and applicants for employment regardless of such factors as race, color, religion, sex, national origin, age, veteran's status or disability. The Company abides by all local, state and federal laws and regulations affecting the hiring of employees. Powered by JazzHR d3W6itSESP

Job Description We are currently searching for an experienced Molding Technicians who want to work for a well-established, growing company that treats everyone with respect. The ideal candidate for the molding technician role will be responsible for the quality of injection molding production. Molding Technician - 3rd Shift Benefits: • $21 - $23 hr. + shift differential, • Comprehensive Benefits package, • PTO, • 401K Retirement Molding Technician - 3rd Shift Requirements & Responsibilities: • 3 years of experience operating injection molding machinery., • Verify product quality from the onset of a production run by following the first piece inspection procedure on all new start-ups., • Safe and efficient installation and removal of full molds and plates in the injection molding machinery.

Job Description Test Technician Location: Tonawanda, NY Salary: $60,000 – $73,000/year Job Summary: We are seeking a skilled Test Technician to support machine testing activities and ensure equipment meets the highest quality standards. In this role, you will work closely with the Test Supervisor, guide junior technicians, and perform both mechanical and electrical testing on complex systems. You will also troubleshoot issues, calibrate instruments, and maintain accurate testing documentation in compliance with ISO 9000 requirements. Responsibilities: • Assist the Test Supervisor during machine testing and troubleshooting., • Guide and mentor junior test technicians in proper procedures., • Perform mechanical and electrical testing on equipment and systems., • Calibrate instruments and testing equipment., • Record and maintain test data; support ISO 9000 documentation., • Diagnose and repair faulty components, test failures, and software malfunctions., • Verify that all nameplates, safety labels, and documentation are correctly applied., • Ensure readiness of equipment for shipment., • Support Project Managers during customer visits and operational training., • Complete testing procedures in accordance with defined quality requirements., • Associate degree in electrical or mechanical engineering with 3–5 years of experience, or 5–10 years of hands-on technical experience., • Experience with electrical systems, controls, and software troubleshooting., • Strong communication and interpersonal skills to work effectively with customers and shop personnel., • Excellent organizational skills and attention to detail., • Familiarity with ISO 9000 standards and documentation processes., • Experience providing customer training or demonstrations., • Background in refrigeration systems., • Experience with validation and testing procedures for complex industrial equipment., • Interest in improving product quality and optimizing testing processes.

Job Description Join our team as a Test Technician and bring your mechanical and electrical skills to the next level! Location: Tonawanda, NY Pay Rate: $60K-$73K(Based on experience) - Up to $85K for engineering graduates Position Type: Full-Time, Permanent This role is primarily based in our on-site testing facility; however, it requires up to 25% travel. Typically, this includes weekly visits to customer installation sites to support equipment testing, troubleshooting, and commissioning. Travel is planned and coordinated in advance to ensure minimal disruption to in-shop responsibilities. What You’ll Do: • Provide support to the Test Supervisor during machine testing activities, • Guide junior test technicians in procedures and troubleshooting, • Perform mechanical and electrical testing on systems and equipment, • Calibrate instruments and equipment required for testing procedures, • Record, document, and maintain test data; support ISO 9000 documentation as needed, • Identify and correct faulty components and test failures, • Detect and resolve software-related malfunctions, • Contribute to the continuous improvement of equipment quality, • Verify that nameplates, safety labels, and documentation are correctly applied, and that the equipment is ready for shipment, • Support the Project Manager during customer visits and operational training sessions, • Ensure that all testing procedures are completed in accordance with defined quality requirements, • Associate degree in electrical or mechanical engineering with 3–5 years of relevant experience, or 5–10 years of hands-on technical experience, • Experience with electrical systems, controls, and software troubleshooting, • Strong communication skills and ability to work effectively with customers and shop personnel, • Excellent organizational skills and the ability to communicate clearly, both verbally and in writing, • Familiarity with ISO 9000 standards and documentation processes, • Experience supporting customer-facing training or demonstrations, • Experience with refrigeration systems, • Experience with validation and testing procedures for complex industrial equipment ABOUT US: PrideNow is Pride Global's light industrial staffing organization, a distinguished division within the Pride Global umbrella. Aligned with the overarching mission of Pride Global, we specialize in delivering top-tier human resources and workforce solutions to the light industrial industry. Leveraging the strength of our global network, PrideNow is dedicated to empowering diversity, ensuring compliance, and driving unparalleled success for businesses. As part of the Pride Global family, we bring forth a commitment to excellence and a comprehensive approach to meeting the unique staffing needs of our clients worldwide. Welcome to PrideNow, where our local expertise seamlessly integrates into the global excellence of Pride Global, shaping a future of dynamic workforce solutions. BENEFITS DISCLOSURE: Pride Global and its affiliates - including Russell Tobin, Pride Health, and Pride Now - offer eligible employees comprehensive healthcare coverage (medical, dental, and vision plans), supplemental coverage (accident insurance, critical illness insurance and hospital indemnity), a 401(k)-retirement savings, life & disability insurance, an employee assistance program, identity theft protection, legal support, auto and home insurance, pet insurance, and employee discounts with some preferred vendors. EEO STATEMENT: As a certified minority-owned business, Pride Global and its affiliates - including Russell Tobin, Pride Health, and Pride Now - are committed to creating a diverse environment and are proud to be an equal opportunity employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, gender, gender identity or expression, sexual orientation, national origin, genetics, pregnancy, disability, age, veteran status, or other characteristics.

Job DescriptionServices Utility Technician- Regular Full Time Buffalo, NY Join the DiVal Safety Equipment team as a member of our fast-paced, well-trained, and dynamic team. The focus of this position is to test, maintain, and repair PPE, electrical gloves, gas detection equipment, and fall protection equipment while ensuring the highest quality of workmanship and professionalism. The ideal candidate has a technical aptitude, is enthusiastic, and has great communication skills. Duties and Responsibilities: • Focus on safety at all times – safety training and direction must be adhered to - report any existing or potential safety concerns to management., • Manage daily activities of the Repair Center including, inventory control, pulling and packaging of orders, preparing and sending quotes, communication with customers, sales professionals and customer care reps., • Provide evaluation, estimates, and repairs to various makes and models of gas detection devices, fall protection equipment, hot sticks, electrical gloves, level A chemical suits, SCBA’s, and hand portable fire extinguishers., • Operate electrical testing equipment in addition to visual inspection., • Contact customers and/or Sales Reps to verify account information., • Accurately complete all required reporting, order processing and customer invoicing., • Assist customers to resolve issues or complaints, referring unsolved grievances to supervisor/management to ensure timely and effective service is provided., • Complete daily workload within defined timelines set by management., • Follow the Values of DiVal: Be Safe, Be Accountable, Be Credible, Be Positive, be Smart and Be Committed., • Perform additional duties that may arise assigned by management. Skills and Requirements: • Excellent communication skills, both written and verbal a MUST., • Strong mechanical aptitude and proficiency in using hand and power tools., • Ability to read and interpret technician manuals, blueprints, and schematics., • Excellent trouble shooting skills., • Computer skills: knowledge of Microsoft Office, CRM, and AS400 (preferred)., • Strong organizational and time management skills a must., • Attention to detail a must., • High School diploma / GED equivalent with 1-3 years prior customer service experience a plus. Benefits: • Medical benefits., • Dental & vision benefits., • Other voluntary benefits (STD, LTD, Accident, Critical illness, Life insurance)., • Company provided life insurance policy., • 401K., • Paid time off. DiVal Safety Equipment is proud and dedicated to be an Equal Opportunity Employer (EOE) of Minorities / Women / Veterans / Disabled. Disclaimer: Where a specific pay range is noted, it is a good faith estimate at the time of this posting. The actual salary offered will be based on experience, skills, qualifications, market/business considerations, and geographic location.

Job Description Applebee's started with the same philosophy we follow today - focused on serving good food to good people! T.L. Cannon is the owner / operator of 55 Applebee's Neighborhood Grill & Bar restaurants. The foundation of success is our Team Members, who bring remarkable industry experience to the table. As a team, we have an unparalleled commitment to exceed our guest's expectations and maintain the highest standards of service, quality, and value for our neighbors. We offer a fun environment where real connections and friends are made! YOU BELONG HERE! What’s in it for you? We can offer you: • Paid vacation if you average 30 hours a week, • Free shift meal when working 6+ hours, • 401(k), • Medical, Dental & Vision coverage, • A great work atmosphere If you have a commitment to ensuring the best quality food for our guest and the drive to succeed, we want to hear from you! COOK REQUIREMENTS: • Must be at least 18 years old, • Eligible to work in the United States, • 1+ year of restaurant cooking experience preferred, but not required, • Must be able to lift up to 50 lbs up to 20 times per day, • Respect your team; treat them as you would like to be treated., • Integrity is everything, act as an owner. We are a Franchisee of Applebee's and an Equal Opportunity / E-Verify Employer. We use eVerify to confirm U.S. Employment eligibility.

Job DescriptionSalary: $25-$28/hr Join the Fastest Growing Dental Team in WNY! Are you ready to advance your career in a dynamic and fast-paced environment? Concierge Dental Group is expanding and we need talented individuals like you to join our team! Key Responsibilities: • Verify the purpose of the visit and explain the appointment flow to patients, • Assist with procedures, including setup, breakdown, and sterilization, • Have a comprehensive understanding of fixed, removable, endo, surgical, and implant procedures, • Perform clinical notation and documentation, • Collect and execute X-rays, • Discuss and educate patients on treatment options, • Schedule appointments accurately and efficiently, • Input treatment plan data with precision, • Boost overall morale among team members and patients Qualifications: • Passion for providing high-quality patient care, • Ability to thrive in a fast-paced and dynamic environment, • Strong organizational and communication skills, • Experience in dental procedures and clinical practices required, • Team player with a positive attitude Why Join Concierge Dental Group? • Competitive salary, • Bonus Structure, • Comprehensive benefits package, including health insurance, paid time off, and retirement plans, • Opportunities for career growth and advancement, • Access to state-of-the-art equipment and technology, • A supportive and collaborative team environment If you are passionate about delivering exceptional patient care and enjoy working in a dynamic and supportive environment, we encourage you to apply. Join our team and take your career to the next level! How to Apply: Submit your resume detailing your relevant experience and why you are the perfect fit for this role!

Job Description About NovaSource NovaSource Power Services is the world’s #1-ranked solar operations and maintenance (O&M) provider and insight-driven total asset optimization partner for renewables asset owners ready to fuel smart growth. With over 20 years of operating experience and a presence on 5 continents, NovaSource has the global reach and strategic capabilities to achieve our clients’ renewables goals around the world. NovaSource’s comprehensive approach to total asset optimization in addition to O&M services includes value engineering, performance analysis, strategic supply chain management, and advanced monitoring systems. The company operates in key global markets managing over 30GW of solar power plants. NovaSource’s expertise extends beyond solar and includes battery energy storage systems (BESS), offering a complete suite of services for the evolving renewable energy landscape. Basic Job Functions: The Battery Energy Storage System (BESS) Technician is responsible for the safe and efficient operation, maintenance, and troubleshooting of utility-scale energy storage systems. This role supports system uptime and performance through scheduled maintenance, real-time fault response, and root-cause diagnostics of electrical and control systems. Working closely with site operations, OEMs, and remote monitoring teams, the technician ensures reliable system performance across components such as inverters, battery modules, fire suppression, HVAC, and SCADA. This is a field-based, hands-on role ideal for those with strong technical skills, a safety-first mindset, and an interest in contributing to the clean energy transition. Experience: • 1 year of experience in a related position. Education: • High School Diploma or equivalent required., • College or technical degree preferred., • Electrical certifications, state, journeyman, etc. a plus., • Equivalent training in military, utility, or power industry a plus. Physical Requirements: • Bending, kneeling, twisting, the ability to lift up to 70 pounds, the ability to climb ladders, and wear PPE for extended periods of time. Ability to work in high and low temperatures, sun exposure, and navigate on uneven ground on foot., • Ability to differentiate between different colors to manage color-coded wiring., • Good hand-eye coordination. Required Skills/Competencies: • Understanding of electrical safety and arc flash standards., • Ability to follow operating, switching, maintenance, safety and environmental procedures., • Must have a safety background with experience in Lockout Tag Out and Job Hazard Analysis., • Knowledge of industrial or power facility operation and maintenance., • Knowledge of local and national electrical codes., • Basic understanding of Electrical schematics and prints., • Understanding of electrical principles., • With oversight, able to retrieve relay files and documentation., • Familiar with CMMS systems for maintenance tracking., • Proven computer skills in a Windows environment (Microsoft Office Products) is required., • Must demonstrate the ability to communicate in English both verbally and written., • Ability to manage multiple tasks and projects., • Self-directed and accountable, able to think critically about processes and issues., • Valid Driver’s License., • Perform to quarterly key performance indicators, such as actual versus expected energy generation, on-time planned maintenance, and support overall plant and equipment efficiency., • Ensure a safe work environment by strict adherence to company protocols., • Responsible for personal safety, quality and schedule adherence., • Learn, understand, and comply with Job Hazard Analysis, Pre-Job Brief and Lock-Out-Tag-Out procedures., • With supervision be responsible for a variety of PM work including measuring, reading, testing and performing maintenance procedures on all site components., • Communicate effectively and professionally with internal and external stakeholders., • Ensure CMMS work orders are complete in their entirety., • Prepare documents necessary for procurement and utilization of materials and vendor services., • Ensure all documentation and required reports are reviewed, complete, submitted and filed., • Attend, participate in and pass all assigned training in safety, environmental and other areas as assigned., • Maintain work area and site housecleaning to 5S standards., • Inspect and clean PV equipment at assigned location., • Verify SCADA site configuration., • Adhere to Company vehicle maintenance standards and safety standards., • Will report to most senior site manager or supervisor depending on site organizational structure., • Travel may be required depending on the needs of the Company. Office Physical Requirements: All positions in our office require interaction with people and technology while either standing or sitting. In order to best service our customers, internal and external, all associates must be able to communicate face-to-face and on the phone with or without reasonable accommodation. NovaSource is committed to compliance with its obligations under all applicable state and federal laws prohibiting employment discrimination. In keeping with this commitment, it attempts to reasonably accommodate applicants and employees in accordance with the requirements of the disability discrimination laws. It also invites individuals with disabilities to participate in a good faith, interactive process to identify reasonable accommodations that can be made without imposing an undue hardship. Potential candidates will meet the education and experience requirements provided on the above job description and excel in completing the listed responsibilities for this role. US: Diversity Statement – Equal Employment Opportunity It is NovaSource’s policy to provide equal employment opportunity to all applicants and employees. NovaSource disapproves of, and will not tolerate, unlawful discrimination against any applicant or employee because of race, color, national origin or ancestry, gender (including pregnancy, childbirth, or related medical conditions), gender identity, age, religion, disability, family care status, veteran status, marital status, sexual orientation, or any other basis protected by local, state or federal laws.

Job Description Our Buffalo Pump and Motor Repair Shop is looking for a skilled Motor Winder to join the team. The Motor Winder’s main responsibility is to assemble, repair, and maintain electric motors both in the shop and in the field. This is a full-time, on-site position. Monday – Friday. 7 AM – 3:30 PM. Motor Winder Responsibilities : • Assemble, repair, and maintain electric motors., • Test and rewind electric motor and generator stators, armatures, or rotors., • Inspect equipment and parts for damage, diagnose possible reason(s) for failure., • Provide information on parts/work required., • Provide recommendations to improve reliability of equipment., • Observe and adhere to Power-Flo Technologies safety procedures., • Experience specifically in winding AC/DC electric motor stators., • Familiar with various hand tools., • Familiar with power tools such as impact guns, cut off wheels, and drills., • Positive attitude and willingness to learn., • Good organizational skills and attention to detail., • Ability to work both independently and in a team setting., • Basic computer skills., • Must be able to regularly lift and/or move more than 25 pounds, frequently lift and/or move more than 50 pounds, and occasionally lift and/or move more than 100 pounds., • Ability to stand for up to 8 Hours., • Ability to lift 50 pounds., • Ability to work on elevated platforms., • Ability to climb ladders., • This position may require standing, stooping, bending, kneeling, crouching and/or reaching., • You may be exposed to dust, loud noises, and hot and cold conditions., • Good hand-eye coordination and fine motor skills may be required for hand tools, power tools, and other machinery. Salary Range between $17 - $32 per hour (based on experience) Competitive Benefits Package • Health insurance (medical, dental, vision), • PTO program and paid holidays, • 401K Learn more about us here: Follow us on LinkedIn: About Us We are an equal opportunity employer. Applicants must be authorized to work for ANY employer in the US. We are unable to sponsor or take over sponsorship of employment Visa currently. Power-Flo Technologies and its subsidiaries participate in the USCIS E-Verify Program to verify that all new hires are authorized to work in the United States. Power-Flo Technologies is a unique Family of Companies consisting of distributors, fabricators, manufacturers and motor and pump repair firms serving the New York metropolitan and New England areas. We are a Master Distributor and Manufacturers Representative with REAL SYSTEMS SOLUTIONS.

Job Description Job Title: Vehicle and Ground Attendant/Porter Department: Service and Sales Reports To: Service Manager/Detail Manager/Sales Manager FLSA Status: Non-Exempt Summary Maintains a safe, clean working environment for all dealership employees and customers. Moves and cleans vehicles, keeps the vehicles in sound working condition, and helps managers as requested. Essential Duties Essential Duties include the following. Other duties may be assigned. Uses good judgment and safe driving skills Maintains a professional appearance. • New Vehicle Check in, • New and Used Vehicles, • Client Care Inspects vehicles to detect damage and to verify the presence of accessories listed on the invoice. Records the description of damages and lists missing items on the delivery receipt. Parks new vehicles in assigned areas. Delivers keys, books and any required accessories to office personnel for stocking Places stock tags in vehicles Catalogs and stores keys Keeps vehicle lots neat and orderly, moving cars as directed by the sales manager and in accordance with dealership display standards. Cleans interior and exterior of vehicles, including the trunk, glove compartment, tires, windows, etc. as needed. Picks up vehicles from and delivers vehicles to customers as directed by management. Starts vehicles daily and reports any problems or concerns. Evaluates cleanliness and fuel needs daily and addresses any problems or concerns. Ensures that required forms/stickers have been completed and are properly displayed. Maintains proper battery log on all new vehicles. Moves sold vehicles to maximize use of space and keep the lot in order. Delivers sold vehicles to the new-vehicle preparation department. Makes sure showroom and delivery bay are free of clutter, and refrigerators kept stocked with water. Drives vehicles to and from service lane, service stalls, wash bay and parking lot as needed. Washes and cleans customer and dealership vehicles Valets and assists clients into their vehicles as requested with a friendly demeanor and smile Installs license plates and frames when requested by sales department Cleans the service and customer areas Performs routine building maintenance in such a manner as to minimize interruption of customers or employees. Wash all windows, glass doors and glass panels throughout the service area. Mops and cleans service waiting area, offices, technicians' locker room and lunchroom, halls, and shop bathroom. Sweeps technician stalls, service department and body shop floors, showroom, halls, and vending areas. Cleans all signs, posters, service signs, mirrors, fans, and vending machines. Removes all debris from lot. Maintains yard equipment and cleaning supplies. Assists technicians with oil and water spills and with emptying drain tubs. Mows lawn, trims shrubbery, and cultivates flowers. Waters flower beds and removes debris. Runs errands as directed by foreman. Understands and complies with OSHA Right-to-Know and other federal, state, and local regulations. Uses proper eye, hand, and body protection when using products that require protection. Marginal Duties Assists transportation department when needed. Other duties may be assigned. Supervisory Responsibilities – None Qualifications To perform this job successfully, an individual must be able to perform each essential duty satisfactorily. The requirements listed below are representative of the knowledge, skill and/or ability required. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. • Valid Driver’s license and acceptance by the dealership’s Insurance Company as required., • Must pass pre-employment drug test., • Team oriented and works well with fellow coworkers., • Attention to detail, excellent organizational and time management skills. Job Type: Part-Time Schedule: Some weekdays and Saturdays. Some full day shifts, morning shifts and afternoon shifts. Pay: Hourly $16 to $18 per hour based on prior experience.

Job Description Applebee's started with the same philosophy we follow today - focused on serving good food to good people! T.L. Cannon is the owner / operator of 55 Applebee's Neighborhood Grill & Bar restaurants. The foundation of success is our Team Members, who bring remarkable industry experience to the table. As a team, we have an unparalleled commitment to exceed our guest's expectations and maintain the highest standards of service, quality, and value for our neighbors. We offer a fun environment where real connections and friends are made! YOU BELONG HERE! What’s in it for you? We can offer you: • Competitive wages, • Meal discounts, • 401(k), • A great work atmosphere, • DISHWASHERS / GENERAL UTILITYAs a dishwasher, you’ll provide our guests with spotless cutlery, plates and glassware. You’ll also keep pots, pans and kitchen tools clean and ready at all times for the line cooks to create delicious dishes for our guests. Organization and efficiency are important as you quickly rinse, wash, pre-sort and deliver clean dishes to the kitchen and dining room. If you have a commitment to ensuring the best quality food and environment for our guests, we want to hear from you! DISHWASHER/GENERAL UTILITY REQUIREMENTS: • Must be at least 17 years old, • Eligible to work in the United States, • Respect your team; treat them as you would like to be treated., • Integrity is everything, act as an owner. We are a Franchisee of Applebee's and an Equal Opportunity / E-Verify Employer. We use eVerify to confirm U.S. Employment eligibility.

What We Love About This Job\n \n • Pay: $38.00 – $47.00/hour (DOE)\n, • Incredible Benefits from Day 1: medical, dental, vision, life, disability, EAP, flexible PTO, onsite clinic, and more\n, • Cutting-Edge Technology: Work with Zeiss CMMs, Calypso software, and advanced precision systems\n, • Career Growth: Professional development, tuition assistance, mentorship, and leadership programs\n Moog is a performance culture that empowers people to achieve great things. Our people thrive by solving challenging technical problems in a collaborative environment built on trust. At Moog, you’ll find deeper job satisfaction, better rewards, and an outstanding quality of life—both inside and outside of work. \n Job Summary\n Moog’s Industrial Group is seeking a Senior CMM Programmer to join the team in Buffalo, NY (East Aurora facility). In this role, you will be responsible for programming, operating, and maintaining Zeiss Calypso CMM systems to ensure the highest level of precision and quality for complex aerospace and industrial components. \n This is an onsite role, reporting to the Project Quality Engineer. \n Responsibilities\n As a Senior CMM Programmer at Moog, you will: \n\n • Lead as the technical expert for the site CMM programming group; manage workload and priorities\n, • Develop, optimize, and proof CMM inspection programs for complex parts, assemblies, and components\n, • Program and operate Zeiss CMMs using Calypso software\n, • Interpret blueprints, specifications, and advanced GD&T to ensure accurate inspections\n, • Conduct dimensional inspections, analyze measurement data, and verify compliance with engineering standards\n, • Troubleshoot and resolve CMM programming issues to maintain uptime and accuracy\n, • Maintain calibration and reliability of CMM equipment per manufacturer guidelines\n, • Collaborate with engineering, manufacturing, and quality teams to drive continuous improvement\n, • Train quality inspectors and personnel on CMM operation and inspection processes\n To succeed in this role, you’ll bring: \n\n • Associate’s Degree in a technical field (or equivalent education/experience combination)\n, • 7+ years of CMM programming experience (Zeiss + Calypso preferred)\n, • Strong knowledge of complex GD&T and blueprint interpretation\n, • Experience leading or mentoring a programming group a plus\n, • Financial Rewards: Competitive pay, annual profit sharing, 401k match, Employee Stock Purchase Plan, flexible spending & health savings accounts\n, • Work/Life Balance: Flexible PTO, holidays, parental leave, relocation assistance\n, • Health & Welfare: Comprehensive health, dental, vision, life & disability coverage, Employee Assistance Plan (EAP), supplemental options\n, • Professional Development: Tuition assistance, mentorship, leadership development, and personal growth programs\n, • This position requires access to U.S. export-controlled information.\n, • Moog is an Equal Opportunity Employer (EOE/AA). All qualified applicants will receive consideration regardless of race, religion, color, national origin, citizenship, sex, sexual orientation, gender identity, age, veteran status, disability, or genetic information.\n

Job DescriptionJob Title: Senior Electrical DesignerLocation: Buffalo, NYHire Type: Direct HirePay Range: $95,000 – $115,000 annuallyWork Model: Primarily Onsite (with flexibility; site visits to client facilities required)Recruiter Contact: Samantha Marranca | 716-256-1271 | & Scope:Positional OverviewThe Senior Electrical Designer will play a key role in developing electrical models, designs, and drawings in both 2D and 3D environments. This individual will coordinate across multidisciplinary teams, conduct site visits, and provide support during project startup and construction phases. The role requires a strong technical foundation in electrical and instrumentation design along with proficiency in Autodesk Plant Design Suite.Role & Responsibility:Tasks That Will Lead To Your Success • Create and develop electrical designs, models, and drawings using AutoCAD, Plant 3D, and Navisworks., • Prepare detailed electrical and instrumentation drawings including one-lines, schematics, bills of material, tray/conduit layouts, grounding, and instrument location plans., • Translate input from P&IDs, one-lines, I/O diagrams, and equipment drawings into accurate design packages., • Coordinate project design activities with other engineering disciplines., • Participate in site visits to gather information, verify conditions, and provide assistance during startup or construction., • Mentor and provide guidance to junior staff on workload coordination, design standards, and best practices., • Ensure adherence to project schedules, deliverables, and quality standards. Skills & ExperienceQualifications That Will Help You Thrive, • 10+ years of experience in electrical design, preferably in industrial settings., • Proficiency with Autodesk Plant Design Suite (AutoCAD, Plant 3D, Navisworks)., • Strong knowledge of NEC and NFPA standards (preferred)., • Proven ability to prepare complete electrical/instrumentation drawing sets., • Excellent organizational, verbal, and written communication skills., • Strong attention to detail and ability to create accurate, well-structured deliverables., • Associate’s degree in CAD Drafting & Design Technology or equivalent experience required., • Willingness to travel locally for site visits, with occasional national travel possible (generally <10–15%).

Job Description Job Summary: The Mortgage Final Document Coordinator is responsible for managing the post-closing documentation process to ensure timely and accurate delivery of final mortgage documents. This includes obtaining required documents from settlement agents within 90 days of loan closing and forwarding them to the appropriate investor or document custodian per investor guidelines. The role requires strong organizational skills, attention to detail, and the ability to communicate effectively with internal and external stakeholders. Key Responsibilities: · Track and monitor closed loan files to identify missing final documents such as recorded mortgages, assignments, and title policies. · Communicate with settlement agents and title companies to obtain outstanding final documents within the required 90-day timeframe. · Review incoming documents for completeness and accuracy; resolve discrepancies as needed. · Upload and archive final documents into the loan origination system (e.g., OpenClose, Encompass). · Package and send final documents to investors or custodians in accordance with investor-specific delivery requirements. · Maintain accurate records of document receipt and investor delivery dates. · Respond to investor inquiries regarding final documentation status. · Collaborate with closers, processors, and post-closing staff to ensure smooth workflow and compliance. · Utilize investor websites to verify outstanding document requirements and update status. · Close out loan files once all final documents have been received and delivered. Qualifications: · High school diploma or equivalent required; associate or bachelor’s degree preferred. · Minimum 1 year of experience in mortgage post-closing or document coordination. · Familiarity with mortgage documentation (Conventional, FHA, VA, USDA). · Strong understanding of investor guidelines and compliance requirements. · Proficiency in Microsoft Outlook and loan origination systems. · Excellent written and verbal communication skills. · Ability to manage multiple tasks and meet deadlines in a fast-paced environment. Preferred Skills: · Experience with OpenClose or Encompass LOS. · Knowledge of title policies and county recording procedures. · Understanding of investor portals and document delivery protocols. This position is paying between $18-$21 per hour based on experience and location. HowardHanna.com Hanna Holdings, Inc. affiliates and assigns are committed to providing equal employment opportunity to all employees and applicants for employment regardless of such factors as race, color, religion, sex, national origin, age, veteran's status or disability. The Company abides by all local, state and federal laws and regulations affecting the hiring of employees. Powered by JazzHR 2AC1udXCes

Job Description Manufacturing company in Cheektowaga specializing in parts for the transportation industry is looking for a quality technician to join their team!! 1st shift hours - 7 a.m. – 4:30 p.m. Monday – Thursday, 7 a.m. – 11 a.m. Friday Pay varies based on experience - $24-29/hr Please reply with resume for immediate consideration!! REQUIREMENTS: • Associate degree, Trade School, and/or Quality Inspection Certification (preferred), • At least two (2) years’ experience in a manufacturing environment, • Experience working with ISO 9001 or other comparable Quality Systems, • Experience with product-failure analysis and material evaluations, • Experience with using inspection equipment, like CMM, optical comparators, and hand measurement tools, • Experience in injection molding (preferred), • Experience in machining (preferred), • Electro-Mechanical equipment experience (a plus), • CAD experience (a plus), • Understanding of Manufacturing and Assembly Processes, • Read and interpret blueprints, • Ability to problem-solve, • Use various precision measuring devices, • Solid verbal and written communication skills, • Ability to work effectively with management, other associates, customers, and suppliers, • Computer proficiency in Microsoft Office Suite, • Participate in improving our products, processes, equipment, and methods by performing inspections, testing, and evaluations, • Supervise compliance to all standards and specifications including ISO-9001, DOT, FMVSS and SAE standards as well as product regulatory requirements to Calif Prop 65, Reach, GADSL, RoHS, TSCA, and Conflict Minerals Reporting, • Facilitate non-conforming material (NCMR) disposition. Contain stock; coordinate rework activity (includes training, quality alerts and visual aids). Verify conformance to customer requirements. Support Material Review Board (MRB), • Assist in handling all customer returns for warranty including failure analysis, corrective action resolution with suppliers and/or Production and final dispositions., • Facilitate correction action procedure (CAR); support interim action, root cause, corrective action, preventative action, and implementation. Perform verification, • Develop and update inspection protocols and/or functional inspections on incoming materials, assemblies, and finished goods, • Create, revise, distribute, and file manufacturing instructions, standard procedures, process specifications, forms, and visual standards; ensuring the latest revision is controlled and used, • Write Technical Product Specifications and Data charts as needed for use in marketing and customer communications, • Communicate with our domestic and foreign suppliers regarding product evaluations and quality concerns, • Perform additional tasks that may be assigned by managementCompany DescriptionAt APS we're your down-to-earth, hometown staffing team. We live here. We work here. We understand the business climate. And we know how to connect qualified and reliable talent with the Western New York companies that need them. When APS was established in Buffalo, NY in 1998, our firm initially focused solely on staffing light industrial positions. Over time, our reputation for quality placements grew, and thus so did the demand for our services. As a result, we expanded our services to include staffing for skilled trades, administrative, it/technical, engineering, and managerial positions. Our branch is located in Kenmore, and services a wide area within Buffalo and surrounding areas throughout the North and South Towns.At APS we're your down-to-earth, hometown staffing team. We live here. We work here. We understand the business climate. And we know how to connect qualified and reliable talent with the Western New York companies that need them. \r\n\r\nWhen APS was established in Buffalo, NY in 1998, our firm initially focused solely on staffing light industrial positions. Over time, our reputation for quality placements grew, and thus so did the demand for our services. As a result, we expanded our services to include staffing for skilled trades, administrative, it/technical, engineering, and managerial positions.\r\n\r\nOur branch is located in Kenmore, and services a wide area within Buffalo and surrounding areas throughout the North and South Towns.

Job Description Canacre’s core services focus on leadership in Environment and Land services throughout the project lifecycle. At Canacre, we emphasize continuous development and growth. Our commitment to investing in industry knowledge and the expertise of our teams sets us apart. Our goals are to provide technical leadership for greater regulatory understanding and certainty and to build collaborative relationships with stakeholders, mitigating tomorrow’s environment, land and right-of-way risks today. At Canacre, we act with honesty and integrity within a culture where trust, collaboration, and teamwork flourish. We commit to diversity, inclusivity and the celebration of successes. Our vision is to foster an environment that promotes inspired and empowered team members who make an impact. The Environmental Compliance Inspector will monitor and report on construction-related activities with respect to the general permit requirements of the applicable regulatory agency, the client, and other cooperating/permitting agencies; as well as monitor and report on construction-related activities in areas of pre-determined biological, cultural, and paleontological sensitive resources. The Environmental Compliance Inspector will also be responsible for inspecting construction sites to ensure compliance with project-specific Stormwater Pollution Prevention Plans (SWPPP) under the Clean Water Act, as well as compliance with erosion control regulations and applicable environmental regulations and permits. The Environmental Compliance Inspector will oversee the proper implementation of mitigation measures and other environmental documents including, but not limited to, biological resources, cultural resources, paleontological resources, fire, dust, hazardous materials, and restoration requirements, as appropriate. Upon completion of Project facility construction activities, field monitors will monitor the implementation of the appropriate restoration treatments. DUTIES AND RESPONSIBILITIES: • Monitor construction activities within specific areas requiring protection or environmentally sensitive areas, • Conduct daily inspection of construction activities for compliance with applicable project approvals, permits (federal, state, and local), and landowner agreements, for the construction of the Project, • Conduct regular inspections of a variety of construction sites to identify potential environmental hazards and ensure compliance with SWPPP and other relevant regulations, • Monitor and report general environmental compliance by the Construction Contractor(s) and subcontractors to client, with particular attention to fire, dust, hazardous materials, erosion control, and restoration guidelines, • Locate and facilitate protection and/or avoidance of environmentally sensitive resources such as migratory bird and raptor nests, rare plants and noxious weeds, watercourses, wetlands, high sensitivity paleontological resource, and cultural resources, • Identify sensitive resources and areas of concern prior to upcoming construction activities, and coordinating with construction personnel to discuss, • Act as a resource to construction personnel to explain environmental regulations and relevant application to construction activity, • Verify that construction work areas, access roads, and environmentally sensitive features have been properly marked and flagged before work is initiated in the area, • Ensure that erosion control or other best management practices do not inadvertently cause impact to other sensitive resources, • Act as a point of contact for onsite government agency inspectors, • Inform the Construction Contractor(s) of all potential and existing compliance issues, and coordinate with the Environmental Compliance Manager and/or Field Lead to determine appropriate corrective actions, • Coordinate with the Environmental Compliance Manager and/or Field Lead for potential stop-work when construction activities violate the conditions of the project approval(s), permits, or landowner conditions, • Identify, document, and oversee corrective actions to resolve non-compliance issues, • Monitor and document restoration activities, • Document the resolution of any compliance issues in daily reports, • Maintain and submit daily reports and logs to the Environmental Compliance Manager and/or Field Lead that document construction activities and associated compliance status for that day QUALIFICATIONS: • Post-secondary degree in Environmental Science or related field of study, • Minimum 5 years’ professional experience in Environmental Management, compliance, SWPPP inspection and mitigation planning, • Minimum 1 year's professional experience in utilities construction industry, • Professional experience working on projects regulated under NEPA or state-equivalent, • Strong working knowledge of environmental legislation and regulations, • Training, qualification or designation related to development of SWPPPs or Spill Prevention, Control, and Countermeasure (SPCC) plans, such as CPESC and CESCL certifications or NYSESCCP required, • Experience related to transmission line construction would be an asset, • Strong verbal and written communication skills – data collection and interpretation, technical report writing, regulatory permit applications, client communications, etc., • Excellent interpersonal and communications skills, • Strong analytical, problem-solving skills, prioritizing and decision-making skills, • Excellent attention to detail, • Ability to interface successfully with multiple departments, external vendors and/or customers, • Ability to manage multiple responsibilities simultaneously with minimal supervision, • Detail-oriented, self-motivated and highly organized with strong problem-solving skills, • Ability to build strong, lasting relationships with key stakeholders, • Excellent written and verbal communication skills, • Working knowledge of Microsoft Office Powered by JazzHR oZD49VR7Nw

Job Description Hohl Industrial Services is currently seeking a Project Safety Coordinator to join our team! One would be responsible for providing on-site support and oversight of the company's safety program. This role will work closely with site Leadership to ensure daily safety operations, audits, training and overall compliance is being maintained. Responsibilities: • Site Safety Support, • Conduct daily inspections to identify potential hazards and ensure compliance with safety regulations, including Corporate and specific Customer requirements., • Assist Foremen in the completion and auditing of Daily Job Safety Analysis (JSA)/Daily Work Plans., • Attend job planning meetings to help incorporate safety measures into daily work activities., • Support project leadership in ensuring proper use of equipment and personal protective equipment (PPE) to maintain a safe work environment., • Investigate incidents and near-misses, documenting findings and recommending corrective actions., • Collaborate with the Corporate Safety Director, Project Managers, and Supervisors to integrate safety measures into project planning and site execution., • Training & Orientation, • Develop and implement site safety policies and procedures in accordance with OSHA and other relevant standards., • Lead safety toolbox talks in an engaging and understandable manner; ensure full attendance and maintain accurate documentation., • Conduct on-site training as needed for job-specific topics such as forklift and aerial lift operation, fall protection, confined space entry, etc., • Coordinate owner-required orientation and training programs; verify attendance and documentation for site access compliance., • Stay updated on industry's best practices and regulatory changes to continuously improve safety protocols., • Site Audits & Compliance, • Perform regular safety inspections and field observations based on project scope and duration., • Evaluate and document compliance in the following areas:, • Safety Documentation: JSA/Daily Work Plans, SDS sheets, job site postings, HASP, emergency contacts., • Mobile Equipment: Operator qualifications, inspection records., • PPE Usage: Ensure all personnel are using the appropriate protective equipment., • Site Conditions: Assess walking/working surfaces, housekeeping, site access., • Rigging & Hoisting: Review lift plans, crane inspections, rigging qualifications, and operator/rigger/signalperson certifications., • Fall Protection: Ensure fall protection systems are in place and used properly., • Tools & Equipment: Inspect hand and power tools for safe condition and use., • Additional Items: Check for proper storage of compressed gas, scaffold safety, fire extinguisher availability, necessary permits (e.g., hot work, confined space), first aid kits, and use of caution/danger tape., • Confined Space Entry: Monitor and verify safety protocols are followed., • Maintain daily reports to the Corporate Safety Director., • Three to Five (3-5) years of construction related safety experience to include but not limited to rigging, confined space, welding and hot work, steel erection, and fall protection., • OSHA 30 required, but OSHA 510 preferred, • In-depth knowledge of OSHA regulations and construction safety standards, • CSM/CHST preferred, • Valid Drivers License required Hohl Industrial Services, Inc. established in 1950, with headquarters in Tonawanda, NY, is a full service specialized organization that provides for a diverse industrial clientele. Hohl offers a unique range of field, shop, technical, equipment sales and services. With our professional staff of engineers, project managers, skilled tradespeople, fabricators and machinists, we are able to thoroughly study and develop a customized plan to meet all of our client's needs. Combining this with our innovative strategies and techniques, added with our experienced field personnel, we administer these plans in a safe, expedient and economical measure. Job Posted by ApplicantPro

Job DescriptionWe are looking for a detail-oriented Billing Analyst to join our team in Tonawanda, New York. This Contract-to-permanent position offers the opportunity to work with a dynamic team and contribute to the accuracy and efficiency of our billing and financial processes. The ideal candidate will have a strong background in accounting systems, billing functions, and financial analysis. Responsibilities: • Oversee and manage billing operations to ensure accuracy and timely invoicing., • Utilize accounting software systems such as Aderant, Costpoint, and About Time to process and analyze financial data., • Collaborate with internal teams to resolve discrepancies in billing or accounts receivable., • Perform audits to verify the accuracy of billing and financial records., • Generate detailed reports related to billing functions and present findings to management., • Maintain and update client information in CRM systems to ensure data integrity., • Monitor accounts receivable and follow up on outstanding balances., • Implement best practices to streamline billing processes and enhance efficiency., • Provide support for financial services, including ADP-related tasks and other accounting functions., • Use Microsoft Excel to create and maintain spreadsheets for financial analysis.• Proven experience with accounting software systems, including Aderant, Costpoint, and About Time., • Strong understanding of billing and accounts receivable processes., • Proficiency in Microsoft Excel, including advanced functions and data analysis., • Familiarity with CRM systems and maintaining accurate client data., • Excellent analytical skills and attention to detail., • Effective communication and collaboration abilities., • Ability to conduct audits and resolve discrepancies efficiently., • Knowledge of financial services and general accounting functions.

Job DescriptionDescription: Attention all Dental Assistants, we are calling on you to partner with us to complete dental exams, treatment, and X-rays to our Military Service members. We will primarily work weekends, with some occasional weekdays in the State of New York on an "as needed basis". We provide health readiness services to meet the medical and dental requirements to maintain a deployable military force for the following: • U.S. Army Reserve (USAR), • Army National Guard (ARNG), • U.S. Navy Reserve (USNR), • U.S. Marine Forces Reserve (MARFORRES), • U.S. Coast Guard Reserve (USCGR), • Air National Guard (ANG), • Provide dental services in a mobile environment., • Provide Digital x-Rays (BW & PANO)., • Provide sterilization of instruments.Requirements:, • Active Dental Assistant Certification in the state (CDA, RDA, EDDA, EFDA), • Active Radiology Certification, • CPR/BLS Certification, • Comfortable with 4-handed chair-side assisting, • Experience with sterilization, • Experience with basic administrative functions, • Experience working with military - preferred, • Proficient with computer programs Join our team, and become a part of a bridge for better health. If you are made a conditional offer of employment, you will be required to undergo background check (including criminal record check) and drug screening. We use E-Verify in our hiring process. DOCS Health is committed to ensuring equal employment opportunity. All employment decisions, policies, and practices are in accordance with applicable federal, state, and local anti-discrimination laws. DOCS Health will not engage in or tolerate unlawful discrimination (including any form of unlawful harassment) on account of a person's sex (including pregnancy), age, race, color, religion, national origin, ancestry, citizenship, physical or mental disability, sexual orientation, gender nonconformity, status as a transgender individual, gender identity, genetic information, marital status, family responsibility, armed services, or any other status protected by law.

Job Description CentiMark Corporation is the nation’s largest commercial/industrial roofing contractor with over 100 offices and 3,500 employees. We have an exceptional opportunity for a full-time Onsite Quality Control Representative to support our crews in the Greater Buffalo, NY area. This role is paying $25/hr - $30/hr + Overtime + Premier Benefits! The Quality Control Representative monitors and evaluates the workmanship on multiple projects. They will spot check projects during installs and ensure that the crews are following the installation specification set forth by the management and perform all final quality control checks of every project once they are completed. Job Summary: • Confirms that crews are at the appropriate job sites daily, • Perform all planned and random inspections of jobs in production daily, • Be responsible for documenting all onsite visits, • Enforce all company and manufacturer installation specifications, • Monitor and address violations of OSHA safety guidelines, • Assure to the best of their ability that all materials, workmanship, and construction are in full compliance with the contract plans and building codes, • Pick up additional needed material and deliver it to the jobsite, • Conduct final QC inspection within 24 hours after completion of job, • Report major installation errors to the Production Manager to dispatch crews to make adjustments, • Participate in all subcontractor and production department meetings, • Take in progress photos when needed and upload to CRM, • 5+ years commercial roofing experience required, • 3+ years of Foreman experience, • Construction safety knowledge preferred, • Capability of interpreting blueprints is a plus, • Able to lift 50 lbs. & climb up & down ladders to minimum heights of 25 feet, • Team player that can work in a fast-paced, deadline driven, collaborative environment, • 2 Health Insurance Plans:, • Free “Core Plan” – Free Medical & Dental, • “Buy Up Plan” – Features a lower deductible for Medical, • Vision Plan, • Free Life Insurance and AD&D Insurance, • Traditional 401K with Company Match, • Roth IRA with Company Match, • Paid Holidays and Vacation, • Employee Stock Ownership Program (ESOP), • Company Vehicle, Fuel Card, • Flexible Spending Account (FSA), • Weekly Pay, • Referral Bonuses, • Dayshift Hours Zc54Cy7deF

Job Description Daemen University is a dynamic, independent, liberal arts institution committed to excellence in student centered learning. The University places special emphasis on preparing students for excellence in professional life, civic engagement, and on instilling and understanding that learning is an exciting lifelong journey. Students are encouraged to be creative, innovative, ethically minded leaders for an ever-changing, diverse, and interconnected world. The Mission of Daemen University is to prepare students for life and leadership in an increasingly diverse and complex world through the integration of education and professional preparation. Daemen University is going beyond instrumental needs to foster the development of individuals who are dedicated to the health and well-being of local and global communities. Purpose of Role Position provides essential clerical and organizational support to ensure the smooth operation of the Student Accounts office and is responsible for aspects of initiating and maintaining transactions, records, and communication for student accounts in a knowledgeable, effective manner that keeps outstanding receivables at a minimum level while working with the highest integrity. About This Opportunity Joining our Business Affairs team, the Student Accounts Specialist will be responsible for the following: Billing and Receivables: • Generating invoices, processing payments, managing refunds according to policy and regulations, • Manage payments against the current term payment plans available through third-party platform, • Assist with processing refund checks, • Processing financial transactions, • Receipt payments made in person and by mail, providing receipts when requested, • Responding to inquiries, resolving issues, and providing information and guidance to students, families, and staff regarding student accounts, • Timely management of high volume of call, text, and email communications, providing support, problem solving. and follow-up, • Ensuring compliance with relevant regulations, such as FERPA and 1098-T reporting., • Maintaining accurate student records, managing financial holds, • Review Scholarship forms and coordinate with Financial Aid to record on students' accounts, • Performing various clerical tasks assigned by supervisors, • Maintain and manage the office calendar for term start dates, billing dates, payment due dates, liability dates and related information, • Assist with coordination and distribution of pertinent tax forms Required Qualifications Required Knowledge, Skills and Abilities: • Enjoy working in a team environment and able to work independently, • Ability to communicate effectively with students and families regarding sensitive financial matters while following appropriate regulations, • Proficiency in relevant software, including spreadsheets (Excel), databases, and financial systems, • Ability to manage multiple tasks, prioritize work, and meet deadlines, • Effective organization and troubleshooting competencies, • Accuracy in financial transactions, record-keeping, and report generation, • Understanding of student billing, financial aid, and relevant regulations Minimum Qualifications: • At least 2 years of education or experience in a business-related field is preferred, with preference given to accounting, financial aid or customer service. Total Compensation Daemen University offers a robust total compensation package that includes: • Health insurance with an option of two plans: an HSA plan with the deductible funded by employer HSA contributions, or a copay plan., • Dental insurance through the Guardian network., • Vision insurance through the Guardian network, and an option between the VSP or Davis plans., • An 8% employer contribution to the retirement savings account when employees contribute just 5%., • Fully paid long term disability insurance, guaranteed-issue life insurance for new hires up to a volume of $150,000., • Tuition waiver for full-time employees and their qualified dependents. Entrance in Tuition Exchange scholarship opportunities to pursue education at other institutions., • Generous time off for administrative and staff employees. Daemen University strongly encourages all campus community members to get vaccinated for COVID-19, including a booster vaccine. Job Posted by ApplicantPro

Job DescriptionPower-Flo Technologies is a leading distributor of electrical equipment offering one of the most comprehensive product and service portfolios in the state, including automation, drives, controls, power distribution, and motor repair. We are looking for an experienced Applications Engineer to join our Upstate New York team. You will play a critical role in delivering complete, real-world systems and solutions to our customers. Applications Engineer Primary Functions • Pre and post sales support for automation, PLCs, drives, motion control, and machine vision products and services., • Assist customers with proof of concept for automation, PLCs, drives, motion control, and machine vision applications., • Assist sales and account managers as necessary to close business., • Phone and On-Site customer support., • Preparation and execution of product training classes including development of course and materials., • Attend vendor training classes as offered and/or required., • Maintenance, appearance and upgrades to demos., • Weekly engineering activity report and schedule., • Target and plan for minimum $20K annual engineering and training billings., • Minimum 2 customer calls per week, whether technical or sales., • Monitor and complete assigned Engineering Tasks, • BS Engineering or equivalent technical degree, • Knowledge of automation, PLCs, drives, motion control, and machine vision applications, • Advanced computer skills: Windows, VM Ware, Networking, • Knowledge of Siemens programming and HMI software a plus, • Ability to operate a motor vehicle We are an equal opportunity employer offering competitive compensation and benefits package including health, disability, life insurance, 401(k) and long-term disability plans. Salary Range $75,000 - $125,000 annually About Us We are an equal opportunity employer. Applicants must be authorized to work for ANY employer in the US. We are unable to sponsor or take over sponsorship of employment Visa. Power-Flo Technologies and its subsidiaries participate in the USCIS E-Verify Program to verify that all new hires are authorized to work in the United States. Power-Flo Technologies is a unique Family of Companies consisting of distributors, fabricators, manufacturers and motor and pump repair firms serving the New York metropolitan and New England areas. We are a Master Distributor and Manufacturers Representative with REAL SYSTEMS SOLUTIONS.

Job DescriptionJob Title: Outside Sales Representative Location: Buffalo 14206 Hybrid (Monday & Friday remote; Tuesday–Thursday on-site) Schedule: Monday–Friday, 8:00 AM – 5:00 PM Salary: $60,000–$64,000 annually, based on experience Overview: We are seeking a results-driven Outside Sales Representative with experience in the steel industry or a related field. This role is responsible for cultivating customer relationships, identifying new business opportunities, and providing technical expertise on steel products. The ideal candidate will possess strong sales acumen, industry knowledge, and a proven ability to exceed revenue targets. Key Responsibilities: • Develop and maintain relationships with customers in construction, manufacturing, and other steel-related sectors, • Identify and pursue new business opportunities through networking, cold calling, and referrals, • Provide technical product recommendations tailored to customer needs, • Negotiate pricing and contracts to close sales and meet revenue goals, • Collaborate with internal departments (purchasing, logistics, customer service) to ensure timely order fulfillment, • Monitor market trends, competitor activity, and industry developments, • Prepare and deliver sales presentations, proposals, and reports, • Maintain accurate records of sales activities and customer interactions, • Attend trade shows, networking events, and company meetings as needed, • Quote materials and processing services for customers, • Execute spot buys to fulfill orders, • Receive materials into inventory system, • Minimum 2 years of sales experience in steel, metals, or industrial products, • Strong understanding of steel grades, applications, and product specifications, • Demonstrated success in meeting or exceeding sales targets, • Excellent communication, negotiation, and relationship-building skills, • Self-motivated and able to work independently, • Willingness to travel within assigned territory, • Proficiency in Microsoft Office Suite, • Valid driver’s license and reliable transportation, • Bachelor’s degree in Business, Sales, or related field preferred, • Experience with structural steel, stainless steel, aluminum, or specialty metals, • Health, dental, and vision insurance, • IRA with company match, • Paid time off and holidays Equal Opportunity Employer / Disabled / Protected Veterans The Know Your Rights poster is available here: The pay transparency policy is available here: For temporary assignments lasting 13 weeks or longer, the Company is pleased to offer major medical, dental, vision, 401k and any statutory sick pay where required. We are committed to working with and providing reasonable accommodations to individuals with disabilities. If you need a reasonable accommodation for any part of the employment process, please contact your staffing representative who will reach out to our HR team. AppleOne participates in the E-Verify program in certain locations as required by law. Learn more about the E-Verify program. We also consider for employment qualified applicants regardless of criminal histories, consistent with legal requirements, including, if applicable, the City of Los Angeles’ Fair Chance Initiative for Hiring Ordinance. Pursuant to applicable state and municipal Fair Chance Laws and Ordinances, we will consider for employment-qualified applicants with arrest and conviction records, including, if applicable, the San Francisco Fair Chance Ordinance. For Los Angeles, CA applicants: Qualified applications with arrest or conviction records will be considered for employment in accordance with the Los Angeles County Fair Chance Ordinance for Employers and the California Fair Chance Act. #1141 Company DescriptionThis company offers growth and a great group of people to work with.This company offers growth and a great group of people to work with.

Job Description WHY JOIN JFS? For more than 150 years, Jewish Family Services of Western New York has been committed to providing high quality services to all in need in the interest of helping to "repair the world." Our services are guided by the essential connection between mental well-being, physical wellness, and positive self-worth. Our reputation is the result of our exceptional staff. In addition to offering competitive compensation and truly exceptional benefits, we are committed to providing a supportive, inclusive work environment in which all employees are able to contribute their best. OUR VALUES Be a Mensch: We are ethical, kind, and admirable. We assume good intent and act with integrity. We are thoughtful and deliberative in how we support our clients, each other, and the community. “Choose generosity over judgment—every time” Be Purpose-Built: We create spaces and programs that respect clients’ individuality and opens access. We strive to meet the individual where they’re at and give them the tools to be successful Be Resolute: We work with tenacity to identify problems, seek out solutions, and get things done. Even small steps forward are acts of resilience. WHAT YOU’LL DO The Housing Administrative and Intake Specialist will assist in the support and daily operations of the Housing department of JFSWNY assisting all housing related programs: including Refugee Services, Career Services, Health Home and Rapid Rehousing. They will complete any work that is supportive of these programs and within the scope of programs funded. The Housing Administrative and Intake Specialist will manage client intake and eligibility screening, maintaining accurate documentation and provide administrative support to case management and housing team. The ideal candidate will be detail-oriented, organized, and passionate about serving vulnerable populations. They will report to the Manager of Housing Department with support from the program managers. RESPONSIBILITIES & DUTIES A representative summary of tasks to be performed is provided below. The employee may be asked to perform job-related tasks other than those specifically stated in this description. The duties and responsibilities of the position are to be carried out in a manner that is consistent with the mission, values, and operating principles of Jewish Family Services. Administrative Support • Take on active role in moving data systems forward with Director of Data Management., • Support Housing Manager with data and financial tracking systems development., • Support Housing navigators and case managers by scheduling appointments, managing files, and preparing necessary documents., • Serve as a liaison between housing, health home, career services, family support and refugee services teams to ensure seamless service delivery., • Enter client data into tracking documents and databases as required and assigned by Housing manager., • Maintain and order supplies for programs., • Track financial expenditures in provided spreadsheets and reconcile with finance department., • Review files for compliance., • Attend agency and department meetings as required., • Assist Housing manager with conducting initial client screenings, needs assessments, and eligibility determinations across program areas., • Collect, verify, and input client documentation in compliance with federal, state and program-specific guidelines., • Coordinate referrals internally and externally to appropriate services and programs., • Maintain up-to-date intake tracking logs and ensure timely data entry into systems such as but not limited to HMIS and Health Home database. WHAT YOU'LL BRING Education and Experience: • Minimum of an Associate’s degree in a human service related discipline or equivalent experience, • Experience providing direct services to vulnerable populations especially in regards to housing services, • Ability to provide culturally sensitive case management., • Proficient communication skills for interaction with clients and the public., • Strong time management and organizational skills., • Working knowledge of housing resources for vulnerable populations especially in regards to 1115 Waiver program, rapid rehousing, and health home programs., • Strong computer skills, especially with Microsoft Outlook, Word, Excel and HMIS, • Familiarity with and appreciative of issues related to people with diverse cultures and languages., • Judgment and Decision Making - Considers relative pros and cons of potential actions to choose the most appropriate one., • Time Management – Uses time effectively and efficiently; values time; concentrates efforts on the more important priorities; gets more done efficiently and effectively., • Adaptability & Flexibility - Adapts to changing business needs, conditions, and work responsibilities, • Client Focus - Understands and meets customer needs, whether internal or external, providing a high level of service and cooperation courteousness & sensitivity), • Must possess a complete commitment to, and understanding of, Jewish Family Service’s Mission & Vision., • Cultural Responsiveness – Ensure staff and programming treat each individual with respect - we honor staff and clients and meet them where they are with regard for their unique wants and needs. (Anava), • Partnership – Ensure staff and programs develop and maintain partnerships to support health and well-being and recognize its role in helping individuals and families achieve meaningful and lasting change. (Chevrutah), • Trust - Work with integrity and be accountable and responsive to others to build a foundation of trust. (Eimun), • Will work in the office and occasionally in the community as needed., • Must have access to a reliable vehicle and possess a valid, clean driver’s license and be sufficiently self-insured., • Frequency of travel: Frequent travel is required for appointments, meetings, and trainings; locations may be across WNY., • Physical activities and efforts required working in an office environment and the ability to move small furniture in preparation of an apartment. This may include making beds, arranging household items, and helping move client luggage., • Visual acuity sufficient to maintain system of files and reports containing computer-generated and handwritten documents., • Auditory acuity sufficient to communicate with staff and others by phone and in person., • Mobility sufficient to conduct regular duties within a normal office environment. WHAT WE OFFER • Competitive salary range of $22.00-$28.00 per hour, commensurate with experience and qualifications., • Benefits such as health insurance (Independent Health), accrued Paid Time Off (PTO) of 4+ weeks, 401k retirement plan with company match, and 13+ observed holidays., • Reduced full-time work week of 35 hours and early close on Fridays., • A supportive and collaborative work environment. ARE YOU READY TO JOIN OUR TEAM? If this sounds like the opportunity that you’ve been looking for, please apply today by completing our application located at . Please provide a resume and cover letter along with your application.

Job DescriptionCompany Description Citizant is a leading provider of professional IT services to the U.S. government. We seek to address some of our country’s most pressing challenges in the areas of Agile application development, Enterprise Data Management, Enterprise Architecture, and Program Management support services – focusing on the U.S. Departments of Homeland Security and Treasury. We strive to hire only ethical, talented, passionate, and committed “A Players” who already align with the company’s core values: Drive, Excellence, Reputation, Responsibility, and a Better Future. No matter how large we grow, Citizant will retain its collaborative, supportive, small-company culture, where successful team effort to address external and internal customer challenges is valued above all individual contributions. Job Description Duties and Responsibilities: Enrollment Process Management: • Schedule appointments and/or service walk-ins for Personal Identity Verification (PIV) Card Activations, Enrollments, Certificate Updates and PIN Resets., • Answering phone calls/email inquiries for all things related to PIV credentials and access control matters., • Coordinate and conduct the enrollment process for PIV cards, including verifying the identity of applicants and collecting required documentation., • Accurately collect and document personal information, biometric data (such as fingerprints), and other necessary details from applicants., • Verify the authenticity of provided documents and information to prevent fraudulent enrollment attempts., • Handle sensitive personal information with the utmost discretion and adhere to data protection regulations and organizational security protocols., • Communicate clearly and professionally with applicants, explaining the enrollment process, required documents, and any additional steps they need to follow., • Provide excellent customer service to address questions and concerns related to the enrollment process., • Escalation management, as it involves listening, understanding, and responding to customer needs and expectations., • Maintain accurate records of the enrollment process, including documentation of each applicant's information, enrollment date, and any issues encountered., • Stay up to date with relevant policies, regulations, and procedures related to PIV card enrollment., • Participate in training sessions to enhance knowledge of enrollment processes, data security practices, and customer service skills.Qualifications Required Competencies: • Experience with Microsoft Excel for data management, coordination, and reporting., • Ability to adapt to changing security procedures and requirements., • Prior experience in a similar role, customer service, or administrative position may be advantageous., • Attention to detail and strong organizational skills., • Excellent interpersonal and communication skills., • Ability to handle confidential information with discretion., • Attend local hiring events 3 - 4 times a month (may vary, depending on the business need)., • The role primarily involves sedentary work., • There may be occasional instances of stair climbing., • Periodic standing and/or walking for extended durations may be required., • Occasional activities such as reaching, squatting, bending, pulling, grasping, holding, and lifting objects weighing 25 - 30 lbs., • Requires typing for most of the day., • US Citizenship required., • Active Public Trust/MBI clearance or the ability to obtain one. Starting salary range: • Health and Welfare (H&W) benefit, • Medical, dental, and vision insurance, • Life and Disability Insurance, • 401(k), • Generous Paid Time Off (PTO), • Flexible Spending Accounts (FSA), • Employee Assistance Program (EAP), • Tuition Assistance & Professional Development Program Disclaimer: Please note that the position you are applying for is part of a pipeline recruitment process. This means the role may not be immediately available but is expected to open in the near future. We are proactively seeking qualified candidates to ensure a prompt hiring process once the position becomes available. Your application will be retained for future consideration as openings arise, and we will reach out to you when the hiring process begins. Thank you for your interest and patience! Additional Information Citizant strives to be an employer of choice in the Washington metropolitan area. Citizant associates accept challenging and rewarding work and in return receive excellent compensation and benefits, as well as the opportunity for personal and professional development. Citizant is an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, pregnancy, sexual orientation, gender identity, national origin, age, protected veteran status, or disability status.

Job DescriptionCompany Description Founded in 1978, California Closets has built a reputation as the leader and design authority in premium space management, delivering custom-designed organizational solutions and exceptional service. We believe home is more than just a place — it should be a source of creativity, comfort, and connection. From beautiful walk-in closets and entertainment centers to versatile pantries and home offices, we design custom storage solutions that add value to your life and home by making space for what belongs. Think of it as ‘practical magic.’ Job Description The Customer Liaison assists customers by providing an exceptional brand experience. The CL serves customers while striving to complete the appointment scheduling in an efficient and detailed manner through phone, email, or when in the showroom. What We Offer: • Health insurance – Medical, Dental, and Vision, • PTO days, floating holidays, paid holidays, and sick days, • 401K retirement plan with company match, • Completes appointment scheduling in an efficient and detailed manner for our Design Consultants, using the Customer Relationship Manager (CRM)., • Answers incoming phone calls & emails to either the local scheduling office or local showrooms and address client needs., • Directs client issues, concerns, and/or complaints to management team while working in conjunction with designers and the management team to bring them to a resolution, as needed., • When in a showroom, serves as first contact to greet all clients who visit our showroom, including assisting the clients with signing our guestbook and offering refreshments as necessary., • Maintains the showroom at the direction of their leader in accordance with the maintenance and cleanliness checklist. This includes opening and closing of the Showroom duties., • May provide customer communication support as it relates to installations, confirmations, and return visits., • Works in conjunction with the activities of the Centralized Scheduling team and communicates daily with the team regarding issues with accuracy of consultations being scheduled.Qualifications, • Ability to communicate politely, clearly and professionally with clients, • Ability to work quickly and accurately data entry, • Calendar management / regional scheduling experience preferred, • Self-starter with a positive attitude, and ability to manage own schedule and comfortable working in a fast-paced environment, • Tech savvy with the ability to quickly learn and apply various business systems (CAD, Epicor, Salesforce, Microsoft Office, etc) Additional Information Find us on Facebook, YouTube, and Instagram We are an equal opportunity employer. We E-Verify. All your information will be kept confidential according to EEO guidelines. Privacy Policy: Terms and Conditions:

Job DescriptionDescription: DOCS Health is seeking talented General Dentists, Endodontists, and Oral Surgeons to bring essential dental care directly to our Military Service Members. Join our team in a unique opportunity to conduct dental exams and treatments that ensure soldiers are deployment-ready. Travel nationwide for weekend events dedicated to serving those who protect our country, and you will have the option to practice with the full support of DOCS Health’s malpractice coverage. Why Join Us? • Serve with Purpose: Provide vital care to members of the U.S. Army Reserve, Navy Reserve, Air Force Reserve, Marine Forces Reserve, Coast Guard Reserve, National Guard, and Air National Guard., • Malpractice Coverage: Practice with confidence under DOCS Health’s comprehensive malpractice insurance (optional), • Nationwide Deployment Impact: Participate in events that support soldiers’ readiness across the country., • Fully Equipped Support: DOCS Health supplies all necessary materials, equipment, and resources to enable seamless mobile dentistry., • Conduct exams, screenings, and comprehensive dental treatments (restorative, endodontics, oral surgery) for military personnel., • Licensure & Certification: Active, unrestricted state dental license and CPR/BLS certification., • Preferred Skills: Experience with mobile dental equipment, military experience a plus, and computer proficiency. About Us: DOCS Health is driven by clinicians and logistical experts who believe in doing the right thing for those we serve. With over three decades of dedicated service, we are a leader in healthcare delivery. Join us in our mission to build a bridge to better health for our nation’s service members Apply today and make a difference with your skills in service of those who serve. With over three decades of experience, we are a trusted industry leader. Our experienced team of clinicians and logistics professionals are dedicated, and strive to do the right thing for our partners and their members every time. Because of this commitment, we’ve set a new standard of care delivery through our fixed-clinic, mobile treatment center, telemedicine, and portable deployment models. Join our team, and become a part of a bridge for better health. If you are made a conditional offer of employment, you will be required to undergo background check (including criminal record check) and drug screening. We use E-Verify in our hiring process. DOCS Health is committed to ensuring equal employment opportunity. All employment decisions, policies, and practices are in accordance with applicable federal, state, and local anti-discrimination laws. DOCS Health will not engage in or tolerate unlawful discrimination (including any form of unlawful harassment) on account of a person's sex (including pregnancy), age, race, color, religion, national origin, ancestry, citizenship, physical or mental disability, sexual orientation, gender nonconformity, status as a transgender individual, gender identity, genetic information, marital status, family responsibility, armed services, or any other status protected by law.

Job Description What You’ll Do Every day, you’ll make a meaningful impact by ensuring our clients have active coverage, our teams have accurate information, and our systems are running efficiently. Your day-to-day will include: Insurance & Eligibility Coordination • Verify insurance coverage and maintain up-to-date information in our electronic records system, • Review daily insurance reports and troubleshoot any anomalies or eligibility issues, • Be a warm, professional presence at our front desk—greeting clients with care and cultural sensitivity, • Answer incoming calls with professionalism and compassion, helping clients feel heard and supported, • Support clinical staff with key clerical tasks including faxing, case filing, mail distribution, and EMR assistance, • Master our electronic medical record system for scheduling, report generation, and data management We’re seeking someone who brings a balance of technical skills and heart. If you have the following, we’d love to meet you: • 2+ years of insurance verification experience (Epaces, HealtheNet, etc.); experience in human services is a plus, • Strong computer skills and prior experience in a front desk or customer service role, • Excellent communication skills—both written and verbal, • Comfort working with both children and adults experiencing mental health challenges Schedule: Monday through Friday: 8AM – 5PM CFS offers full-time employees the benefits below to support our employees and their families and help to create a healthy work environment. • Employer Paid Life Insurance, • Medical, Two Plan Options, • Dental, Two Plan Options, • Vision Insurance, • Wellness Program and Incentives, • Health Savings Account (HSA) and Quarterly Employer-Contributions, • Healthcare Flexible Spending Account (FSA), • Dependent Care FSA, • Employee Referral Bonus, • Qualifying Employer for Public Service Student Loan Forgiveness Program (PSLF) Equal Opportunity Employer This employer is required to notify all applicants of their rights pursuant to federal employment laws. For further information, please review the Know Your Rights notice from the Department of Labor.

Job Description We are looking for an experienced Sales & Tax Use Manager to join our team in Tonawanda, New York. In this role, you will oversee corporate tax operations, ensuring compliance with sales and use tax regulations while maintaining accurate financial records. This position offers the opportunity to lead tax-related audits and drive efficiencies in tax reporting processes. Responsibilities: • Perform monthly reconciliations between Vertex, the general ledger, and tax return data., • Prepare balance sheet and cash reconciliations at the end of each month, including adjusting journal entries as needed., • Oversee the submission of sales and use tax payments through Anybill and coordinate treasury funding requests., • Assist with compliance-related activities, including preparing and reviewing sales tax calculations and customer setups., • Manage sales and use tax audits and negotiations, providing leadership to one direct report., • Issue and review exemption certificates, ensuring proper documentation and compliance., • Maintain the Vertex O Series Tax Engine, including updating tax mappings and drivers., • Process refund requests, both internal and external, ensuring accuracy and timely submission., • Support the review of sales orders to verify tax calculations and maintain organizational setup within Vertex., • Bachelor’s degree in accounting, MST degree or courses a plus, • Min of 7 years Sales Tax experience in either a large industry or Big 4 Public Accounting with a Manufacturing or retail background, • Experience using Vertex or other sales tax software is necessary, • Prior experience managing a team preferred, • Demonstrated ability to drive process improvements utilizing innovative solutions, • Ability to work cross functionally in a matrix organization, • Ability to drive value and minimize tax within the sales tax function, • Strong project management skills Strong desire to work in a progressive tax department where meeting the compliance deadlines are considered the minimum requirements for the position

Job Description Overview Join the Stratosphere Quality Team! Stratosphere Quality cultivates a positive organizational work environment where employees are encouraged to perform at their best. Our team enjoys rewarding and meaningful work in a wide range of manufacturing work environments. Begin a rewarding career today and envision yourself at work with Stratosphere Quality. Top 10 Reasons to work for Stratosphere Quality: Vacation Time Start accruing PTO on Day One Benefits Medical Benefits, Life Insurance, & 401k all after 60 days Advancement Opportunities After just 90 days of Employment Referral Program Earn $200 per referral! SQ Rocs Be rewarded for your hard work President's Club Be recognized for your hard work Shutdown Savings Save wages for a rainy day Reimbursement Program New Equipment on Us! New Tech Learn and Work with our newest Technology Platforms Travel Opportunities Customer sites from coast to coast About the Role Stratosphere Quality is seeking a Supplier Quality Representative with a strong engineering background and hands-on knowledge of automotive manufacturing. In this role, you will be the primary point of contact for manufacturing, quality, and engineering teams, ensuring the highest standards of product quality while identifying and resolving issues proactively. Responsibilities What You’ll Do * Serve as the primary liaison with manufacturing, quality, and engineering personnel for supplier parts and processes * Monitor all phases of production to detect and correct potential quality concerns early * Analyze incoming, in-process, and finished products to provide feedback and ensure preventive containment * Prioritize work, respond to product concerns, and report findings in a clear, timely format * Coordinate containment of defective parts and assist in implementing corrective actions as needed * Conduct daily scrap reporting, including traceability and documentation * Capture photos of parts and share with relevant teams for analysis and communication * Monitor test equipment performance, scrap rates, and machining efficiency (OEE) * Audit pre-machining, assembly, and functional processes to verify product quality * Review inventory levels, including WIP, finished goods, and raw materials, and escalate concerns as appropriate * Troubleshoot machining and production issues, working closely with engineering and reliability teams * Conduct daily floor walks to monitor production processes, solicit operator feedback, and report issues * Participate in quality calls, shift start meetings, and proactive audits of components * Manage sorting and containment processes when required * Ensure professional, responsive, and respectful communication in all interactions * Perform other duties as required to support site quality and operational goals Qualifications * Engineering or technical background * Strong knowledge of automotive manufacturing processes and quality standards * Experience with inspecting and auditing production components * Proficiency with hand measuring devices and basic tools * Skilled in Microsoft Office (Excel, Word, Outlook) * Excellent organizational skills, attention to detail, and multitasking ability * Strong verbal and written communication skills * Ability to work assigned hours based on business and operational needs * Professional, proactive, and able to build strong working relationships with cross-functional teams Why You’ll Love Working Here * Join a team that values your expertise and hands-on problem-solving skills * Opportunity to work across multiple aspects of automotive manufacturing and quality * Make a direct impact on product quality and operational efficiency * Collaborative and supportive work environment with opportunities for growth Qualifications What is Stratosphere Quality? Click Link below to find out more. Company DescriptionStratosphere Quality, founded in 2009, is a major global provider of quality assurance and outsourcing solutions, including sorting and inspection services, to manufacturers of parts and components in the automotive, medical device, electronics, home appliance, and recreational vehicle industries. Headquartered just northeast of Indianapolis, Indiana, Stratosphere Quality has a geographic reach that includes the United States, Canada, Mexico, Japan, and China. Stratosphere Quality cultivates a positive organizational work environment, where employees are compelled to perform their best. Our team enjoys rewarding and meaningful work in a wide range of manufacturing work environments.Stratosphere Quality, founded in 2009, is a major global provider of quality assurance and outsourcing solutions, including sorting and inspection services, to manufacturers of parts and components in the automotive, medical device, electronics, home appliance, and recreational vehicle industries. Headquartered just northeast of Indianapolis, Indiana, Stratosphere Quality has a geographic reach that includes the United States, Canada, Mexico, Japan, and China.\r\n\r\nStratosphere Quality cultivates a positive organizational work environment, where employees are compelled to perform their best. Our team enjoys rewarding and meaningful work in a wide range of manufacturing work environments.

Job Description Power-Flo Technologies is a fast-growing family of companies that consist of distributors, fabricators, manufacturers and motor and pump repair firms serving the New York metropolitan, New England, and Upstate New York areas. At Power-Flo Technologies, we monitor, troubleshoot, and repair all types of industrial electrical equipment including electric motors and pumps. Our Buffalo and Auburn repair facilities provide field service and in-house repair or rebuilding of equipment and machinery. We are looking for you to join our upstate Pump and Motor Repair Team as an Outside Sales Account Manager. Territories: Auburn and Buffalo Salary Range: $50K – $95K (draw against commission structure) Competitive Benefits Package • Health insurance (medical, dental, vision), • PTO program and paid holidays, • 401K with employer match, • Company provided life insurance (after 1 year of employment) Outside Sales (Pump and Motor Repair) Responsibilities: • Schedule outside appointments with existing customers to review requirements, nurture relationships, maximize sales opportunities, and uncover new opportunities., • Generate and develop new business to increase revenue, through prospecting activities, including cold calling., • Effectively liaison between the company and customers for all ongoing account management activities including quotations, pricing, delivery, technical support, and service., • Establish and maintain up to date knowledge on procedures, services, and tools by successfully completing all training activities as needed., • Determine customer requirements to recommend specific products, solutions, or services., • Target Account Planning and Execution., • Perform all administrative aspects of the position, including sales / opportunity reports and maintenance of customer accounts., • Prepare and execute effective sales presentations and demonstrations of services., • Annual sales forecast and execution., • Keep up to date with market trends and competitor activity., • Attend conferences and trade shows., • All other duties as assigned from time to time. Outside Sales (Pump and Motor Repair) Qualifications: • Experience in wholesale motor/electrical business., • At least 2 years of business-to-business sales experience., • Desire to grow business through outside sales appointments., • Strong negotiation and communication skills., • Effective time management, organization, and multi-tasking skills., • Commitment to quality., • Proficiency with Microsoft Office., • Capable of preserving confidential or sensitive information., • Valid and clean driver’s license to operate company vehicles., • Epicor Eclipse ERP preferred. Physical Requirements • Ability to travel extensively, including driving to client locations and attending off-site meetings., • The role involves a significant amount of walking, standing, and potentially carrying promotional materials or product samples., • Ability to utilize a computer keyboard, computer monitor, computer mouse, adding machine, laptop, and telephone for prolonged periods of time Learn more about our Pump and Motor Repair capabilities here: Follow us on LinkedIn: Our Core Values • Our People, • Relationships, • Innovation, • Sustainability, • Growth, • Determination Applicants must be authorized to work for ANY employer in the US. We are unable to sponsor or take over sponsorship of employment Visa currently. Power-Flo Technologies and its subsidiaries participate in the USCIS E-Verify Program to verify that all new hires are authorized to work in the United States. Power-Flo Technologies is a unique Family of Companies consisting of distributors, fabricators, manufacturers and motor and pump repair firms serving the New York metropolitan and New England areas. We are a Master Distributor and Manufacturers Representative with REAL SYSTEMS SOLUTIONS.