Welder jobs in Hasbrouck Heights, New JerseyCreate job alerts

Job Summary:\n \n \nPerform Electron beam welding on assemblies following procedures; able to set up and tend machines designed to weld through the use of a high-velocity electron beam.\n \n Reporting To:\n \n \nDepartment Manager/Supervisor\n \n Essential Job Functions:\n \n\n • Review work orders to ensure familiarization with job requirements.\n, • Follow technical instructions, interpret engineering blueprints and technical terms.\n, • Operate machine(s) utilizing proper procedures for optimum weld quality.\n, • Perform welding using Heli-arc, Spot weld, and Electron Beam equipment.\n, • Inspect parts continuously to ensure that the welding process is performed in a manner consistent with company standards of quantity and quality.\n, • Perform set-ups, adjust control settings to meet strength, leak test, pressure and penetration requirements for a wide variety of assembly types and materials.\n, • Leak test welded parts at each operation as required by routing.\n, • Record weld results and distribute daily report.\n, • Maintain file of weld schedules and fixtures in good order in weld room.\n, • Perform cross-sectioning of parts where required.\n, • Perform routine maintenance on machines and equipment in the weld room as required.\n\n \nAdhere to health and safety regulations.\n \n Skills and Abilities:\n \n\n • Basic computer skills\n, • Ability to work in a fast-paced working environment\n, • Attention to detail\n, • Teamwork and communication skills\n, • Ability to lift/move up to 30lbs.\n, • Ability to walk/stand for prolonged periods of time\n\n Education and Experience:\n \n\n • High School Diploma or equivalent.\n, • Technical degree is a plus\n\n Benefits:\n \n\n • Medical\n, • Dental\n, • Vision\n, • Short Term Disability\n, • Long Term Disability\n, • PTO\n, • Paid Holidays\n, • Paid Sick Days\n, • 401K / 401K Company Match\n, • Life Insurance\n, • Paid Jury Duty\n, • Employee Referral Program\n, • Tuition Reimbursement Program based on\n, • Employee Assistance Program\n\n Salary Range:\n \n \n$28.00 - $35.00/Hour, Depending on Experience. \n \n EEOC Statement: \n \n \nMW Industries, Inc. provides equal employment opportunities to all employees and applicants for employment and prohibits discrimination and harassment of any type without regard to race, color, religion, age, sex, national origin, disability status, genetics, protected veteran status, sexual orientation, gender identity or expression, or any other characteristic protected by federal, state, or local laws.\n \n \nVisit us at www.mwcoomponents.com for more information about MW Industries, Inc. and our affiliate companies.\n \n \nEqual Opportunity Employer\n \n This employer is required to notify all applicants of their rights pursuant to federal employment laws. For further information, please review the Know Your Rights notice from the Department of Labor.

Machine Shop / Facilities Manager Location: Englewood, NJ Reports to: President Department: Production Direct Reports: Planner, Machinists, Assembler, Welder Indirect Reports: Purchasing Representative, Production Control Supervisor, Warehouse/Shipping & Receiving Supervisor, Assembly & Test Engineer About the Company Flowtec Group has partnered with a well-established rotating equipment and spare parts manufacturer on their search for a Machine Shop / Facilities Manager. Our client operates a multi-million-dollar precision manufacturing facility serving demanding industrial markets. Position Summary The Machine Shop / Facilities Manager is responsible for managing and continuously improving all operational aspects of the manufacturing facility. This is a hands-on, high-energy leadership role reporting directly to the President. Key Responsibilities • Ensure a safe, OSHA, and environmentally compliant workplace, • Manage facilities operations and lead modernization initiatives, • Supervise machinist, assembly, and welding personnel, • Coach direct and indirect employees to maximize morale, engagement, and productivity, • Utilize visual metrics to provide constant feedback on performance vs. plan and continuous improvement goals, • Own capacity, expense, inventory, and capital investment budgeting and forecasting, • Lead machine shop and test area capacity planning, • Manage all aspects of the supply chain, including supplier selection and contract negotiation, • Oversee critical shop activities including production planning, preventative maintenance, and continuous improvement, • Utilize EPICOR Release 10 ERP system to schedule and track production transactions, • Interface with customer representatives and third-party quality assurance organizations during shop inspections and customer witness testing, • Participate in the Quality Review Board, • Drive 5S and lean implementation, • Reduce slow-moving inventory and manufacturing costs, • Provide cost estimates for sales and engineering in support of proposal and product development activities Required Qualifications • Minimum 10 years of machine shop supervisory experience, preferably in a high-precision manufacturing environment, • Engineering degree or equivalent work experience, • Strong CAD/CAM, CNC, and manual machine tool knowledge and experience, • Basic knowledge of ASME welding and pressure vessel code requirements, • Ability to read engineering drawings and specifications, • Experience working within ISO or Military Standard Quality assurance systems, • Working knowledge of Microsoft Office, • Root cause analysis, problem solving, and corrective action implementation, • Basic understanding of casting techniques and casting quality control, • Continuous improvement mindset and drive, • Leadership and coaching skills, • Desire and aptitude to grow into more senior positions within the company

The Welder I Perform Electron beam welding on assemblies following procedures; able to set up and tend machines designed to weld through the use of a high-velocity electron beam.

The Entry-Level B Welder is responsible for performing basic welding and repair tasks on steel waste containers and compactors. This position focuses on structural reinforcement, minor fabrication, and the restoration of worn or damaged units under s Welder, Welding, Equipment Maintenance, Transportation, Skilled Trades, Repair

Location: Bergen County, NJ Compensation: $35–$45/hour + Benefits Schedule: Night Shift Monday–Friday, 4:00 pm to 1:30 am A growing food manufacturer is seeking an experienced Fabricator / Sanitary Welder NIGHT SHIFT to support Engineering and Maintenance. This is a hands-on role for someone capable of independently taking stainless-steel fabrication projects from layout and fabrication through welding, finishing, installation, and turnover. The ideal candidate has advanced sanitary welding and stainless-steel fabrication experience and can serve as a technical resource within the plant. Responsibilities • Fabricate, modify, install, and repair stainless-steel equipment, piping, tanks, conveyors, platforms, guarding, hoppers, and other components., • Perform high-quality TIG and MIG welding, including thin-gauge and sanitary stainless applications., • Lay out, cut, form, grind, polish, passivate, and finish stainless steel and other metals., • Read blueprints, weld symbols, P&IDs, schematics, and engineering drawings., • Build components from drawings and field measurements., • Support equipment installations, utility tie-ins, capital projects, and equipment upgrades., • Fabricate replacement parts to reduce equipment downtime., • Apply sanitary design standards using 304/316L stainless and food-grade materials., • Support troubleshooting, preventive maintenance, and continuous improvement., • Mentor less-experienced fabricators and maintenance technicians. Qualifications • 7+ years of hands-on welding and fabrication experience., • 3+ years in food, beverage, dairy, pharmaceutical, or another sanitary manufacturing environment., • Advanced TIG and MIG stainless-steel welding skills., • Experience with sanitary tubing, Tri-Clamp fittings, weld ferrules, and butt welds., • Strong stainless-steel layout, fabrication, grinding, polishing, and finishing skills., • Ability to independently complete fabrication projects., • Ability to read engineering drawings, weld symbols, and P&IDs., • Knowledge of sanitary design, GMPs, food safety, and CIP systems., • AWS D1.6 or ASME Section IX certification is a strong plus., • Orbital welding experience preferred. Why Join? • $35–$45/hour, • Monday–Friday night shift, • Benefits, • Skilled fabrication work with significant autonomy, • Opportunity to support equipment improvements and capital projects, • Stable, growing food manufacturing environment Occasional weekend or shutdown work may be required.

The Welder Class 2 is a mid-level welding position responsible for welding prefabricated components and fabricating assemblies from blueprints. The position requires the ability to independently set up welding equipment, interpret fabrication drawing Welder, Welding, Manufacturing, Staffing, Production, Fabrication

Job Description Alternate Concepts, Inc. (ACI) and Herzog Transit Services, Inc. (HTSI), collectively the ACI/Herzog Joint Venture, along with our key subcontractors are seeking applicants for the Hudson Bergen Light Rail operation located in Hudson County, New Jersey. ACI was founded in 1989 with their corporate office located in Boston, MA and Herzog founded in 1969 with corporate offices located in St. Joseph, MO and Fort Worth, TX. Combined with our companies provide FRA/FTA compliant transportation, equipment maintenance, dispatching, right-of-way maintenance, facility maintenance and dispatching services for 20 distinct client properties. In addition to the Joint Venture being the upcoming operator/maintainer of the Hudson Bergen Light Rail, we currently jointly operate the Tren Urbano heavy rail service in San Juan, Puerto Rico and the CTDOT’s Hartford intercity service in Connecticut. ACI/Herzog Joint Venture, along with our key subcontractors, are currently seeking a Full-Time Track Maintainer to join our team. The starting pay rate for this position is $15.99 per hour. ACI-Herzog Joint Venture offers a competitive benefits package for eligible employees, including paid-time-off, medical, dental, and vision coverage; employer-paid life and AD&D insurance; short-term and long-term disability coverage; and a 401(k) retirement savings plan. Voluntary employee-paid benefits include supplemental life and AD&D insurance, critical illness, hospital indemnity, and accident coverage. The Track Maintainer is responsible for the maintenance, repair, inspection, and emergency response related to track within the Hudson Bergen Light Rail (HBLR) system. This role emphasizes safety, operational excellence, and effective team collaboration under varying conditions. Duties and Responsibilities: • Installs railroad track and embankments including special track work, road crossings, signage, and rail lubricators., • Capable of using hand and power tools and a wide variety of sizes and types of track machines including:, • Spike pullers, spike drivers, tie adze, hydraulic rail jacks, power wrenches, tie boring machines, rail drills, rail grinders, and rail saws., • Highway trucks equipped with rail guide wheels, hydraulic booms, and lift gates to remove and replace ties, rails, fasteners - cut or screw spikes, anti-creepers, bolts, elastic clips, insulators, rail seat pads, and conventional and insulated rail joints, special track work components, crushed rock ballast, crossing surfaces, paving, subgrade material, vegetation, signs, and structures., • May work as a member of a crew or independently., • May work under the direction of a Railroad Track Foreman or Track Welder., • Regular and consistent engagement, participation and promotion of ACI-Herzog’s Culture and its essential behaviors are a requirement for this position., • Regular and predictable attendance and punctuality are a requirement for this position., • Other duties as assigned. Qualifications: To perform this job successfully, an individual must be able to perform each essential duty satisfactorily. The requirements listed below are representative of the specific knowledge, skills, and/or abilities required. • Must be legal to work in the U.S.A., • Must possess a valid driver’s license., • Must be able to pass a pre-employment physical and drug screening as well as a background check and motor vehicle report review. Education and/or Experience: • High School diploma or equivalent., • Previous maintenance experience., • Ability to complete work under time pressures and to maintain composure under the stress of emergency situations., • Must be able to work well with others. Language Skills: • Able to read, write, and communicate (speak, hear, and understand) the English language in a work setting., • Ability to read and interpret documents such as safety rules, operating and maintenance instructions, and procedure manuals., • Ability to write regulatory and departmental reports and correspondence., • Ability to speak effectively before groups of customers or employees of the organization. Mathematical Skills: • Ability to work with mathematical concepts including but not limited to proficiency in adding, subtracting, multiplying and dividing all units of measure., • Ability to apply concepts such as fractions, percentages, ratios and proportions to practical situations., • Ability to compute ratio, rates, percentages and able to draw and interpret graphs and tabular data sets. Reasoning Ability: • Ability to solve practical problems and deal with a variety of concrete variables in situations where only limited standardization exists., • Ability to interpret a variety of instructions furnished in written, oral, diagram, or schedule form. Certificates, Licenses, Registrations: • Must successfully complete Light Rail operations training program and Light Rail Operator recertification annually., • Possession of a valid driver’s license and any other certificates, licenses and registrations as required by law to perform the specified functions., • Must be certified in CPR/AED. Physical Demands: The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. • The employee must be able to distinguish between visual colors., • While performing the duties of this job, the employee is regularly required to stand, walk, sit; use hands to finger, handle or feel; reach with hands and arms; climb or balance; stoop; kneel, crouch, or crawl; talk or hear; and taste or smell., • The employee must occasionally lift and/or move up to 75 pounds., • Specific vision abilities required by this job include close vision, and ability to adjust focus. Work Environment: The work environment characteristics described here are representative of those an employee encounters while performing the essential functions of this job. • While performing the duties of this job, the employee is occasionally exposed to moving mechanical parts and outside weather conditions. The noise level in the work environment is usually moderate. AHJV reserves the right to revise this job description from time to time. NOTE: The above statements are intended to describe the general nature and level of work performed by employees assigned to this position. They are not intended to be construed as an exhaustive list of all responsibilities, duties, and skills required of employees assigned to this job. It is the policy of ACI/Herzog Joint Venture to provide equal opportunity in employment for all qualified individuals regardless of race, color, religion, ethnicity, national origin, ancestry, disability, medical condition, age, citizenship, sex, sexual orientation, gender, gender identity, gender expression, marital status, pregnancy, genetic information, military status, veteran status, and any other characteristic protected by law.

Job Description TIG WELDER An industry leader in the design, manufacturing and distribution of custom stainless-steel equipment for the food service, plumbing and materials handling industry is looking for experienced TIG welders responsible for fitting and welding of stainless steel parts using TIG process. PRIMARY RESPONSIBILITIES o Set up welding machines o Read and interpret blueprints and/or drawings to determine the specific welding requirements o Fit and TIG weld stainless steel components based on the specifications of the blueprints and/or drawings o Insure work conforms to prints and quality requirements. o Follow production plans and required daily output requirements. o Assists with material cutting and preparation as needed. Including sawing, grinding and deburring. o Keep work areas clean and organized and take proper care of all equipment and facilities o Provide a great level of attention to detail and focus on the given task o Follow all safety rules and quality standards o Work together with team members to maximize productivity and efficiency KNOWLEDGE AND SKILL REQUIREMENTS o High School Diploma or equivalent preferred o One-year related experience and/or training through a certified training facility. o Experience with stainless steel TIG welding required o Ability to lift up to 50 pounds independently. o must be able to stand, kneel, stoop. o Ability to identify and measure material types and thicknesses o Ability to produce quality products consistently o Ability to follow instructions given both verbally and in written form o Must be reliable with a strong work ethic We are an Equal Employment Opportunity Employer. We offer a competitive salary with great benefits. The position is full-time; Monday-Friday. 1st shift, 7:30 Am to 4:00 PM with some overtime. Benefits: o Retirement Plan o Health insurance o Paid time off Schedule: o 8-hour shift o Day shift o Monday to Friday o Overtime Work Location: One location

Job Description We are seeking a part-time Welding Instructor to work alongside the senior instructor, follow the welding curriculum, and support students in the classroom and welding lab. Schedule: Monday-Thursday 4:30pm to 9:30pm Duties and Responsibilities • Assist with student instruction in both the classroom and welding lab, • Guide and support student learning in a safe, structured environment, • Demonstrate welding, cutting, fitting, and fabrication techniques, • Prepare materials and projects for instruction, • Weld, fabricate, cut, and visually inspect welds on a variety of materials and processes, • Work with mild steel, stainless steel, and aluminum, • Facilitate workshop sessions as needed, • Enforce all shop and lab safety procedures, • Perform other duties as assigned Qualifications • Current welding certification or completion of an AWS program, trade school, 900-hour welder/fabricator program, or equivalent training., • and/or 5-7 years of documented industry experience, • Strong knowledge of welding theory, welding code requirements, and certification standards, • Demonstrated commitment to workplace and lab safety, including the ability to follow and enforce safety protocols, • Ability to work effectively with students of diverse backgrounds, skill levels, and learning needs, • Ability to pass a multi-process welding and cutting evaluation, • Minimum of 5 years of experience in fabrication, fitting, ironwork, welding, CNC, pipe, or related metalworking industries, whether civilian or military, • Comfortable demonstrating and instructing SMAW, GMAW, FCAW, GTAW, plasma cutting, and oxy-fuel cutting in multiple positions, • Minimum of 3G certification or equivalent skill level in at least two welding processes Certifications • Destructive test certification, • OSHA certification, • Torch and fire watch certification, • DOT certification Candidate must pass a practical welding test. The completion of a background check will be required for the selected candidate. Compensation: The hourly pay for this position is $28. Benefits: • New Jersey Sick Leave: Earn 1 hour of sick leave for every 30 hours worked with a maximum of 40 hours of leave per benefit year. (Eligible to use after successful completion of probationary period.), • Employee Assistance Program provides free, confidential, limited counseling services, work-life assistance, legal and financial guidance., • Commuter Benefits: Free parking access is provided on site. An optional Transit Pre-Tax Plan is available which allows employees to use pre-tax dollars to purchase eligible transit expenses., • NJ Defined Contribution Retirement Program provides eligible members with a tax-sheltered, defined contribution retirement benefit, along with life insurance and long-term disability coverage. (Must meet eligibility requirements.)

Job Description Role Snapshot Picture your day: you start with a safety huddle, review work orders, and step onto the track to bring railcars back to life. You’ll diagnose issues by sight, touch, and training; rebuild critical car components; and verify every repair against stringent rail industry standards. By the end of your shift, you’ll have logged precise repair notes via an electronic keyboard system and seen the direct impact of your craftsmanship on North America’s freight network. What You’ll Do • Repair, modify, and upgrade freight railcars to spec., • Rebuild key components, including bolsters, side framers, hitch heads, and boxcar doors., • Weld, fabricate, and use a cutting torch (welding up to 30% of your time; hands-on mechanical work approximately 95%)., • Use blueprints and technical specifications to perform mechanical repairs with hand and power tools and precision measuring instruments., • Inspect equipment by visual checks and tactile assessment using your specialized knowledge and training to pinpoint root causes., • Operate a forklift to move, align, and position components accurately., • Measure, cut, and thread pipe; replace air lines using appropriate hand tools., • Assemble subassemblies and major components; function-test to ensure proper operation., • Repair broken parts using hand tools and welding equipment., • Enter repair details and codes via an electronic keyboard system. Also Part of the Job, • Keep the work area orderly and clean., • Set up and operate metalworking tools (e.g., welder or grinder) as needed., • Pitch in on other tasks assigned by your supervisor. Performance & Quality Benchmarks, • Meet established time standards for each task., • Deliver work that meets customer and governing requirements (AAR, FMO, FRA, TTX, etc.)., • Follow all work rules and procedures., • Work safely at all times to protect yourself and your team. Tools & Equipment You’ll Use, • Circular saw., • Air impacts (1/2", 3/4", 1"); air grinders (4", 7", 9"); air or hydraulic portable power pump and ram (regular use)., • Common hand tools (frequent use)., • Cutting torch (frequent cutting); heating torch for bending (regular); side grinder for grinding (regular); hoist for lifting (regular); winch for pulling (regular). Required PPE, • Steel-toe shoes, hard hat, earplugs, safety glasses, welding shield, burning goggles, grinding shield, and proper clothing (long-sleeved shirt and long pants while welding). Physical Demands, • Approximate activity times (vary slightly by location): standing, hearing, and seeing for 8–10 hours; handling for 6 hours; walking, stooping, kneeling, crouching, and fingering for 5 hours; reaching below waist, twisting, and feeling for 2 hours; sitting, climbing, balancing, crawling, reaching overhead, and talking for 1 hour., • Frequent: standing, kneeling, stretching, reaching, gripping tools/objects, bending at the waist., • Regular: walking, crouching, twisting while standing. Occasional: sitting, crawling, twisting while sitting for 1 hour or less., • Lifting railcar parts from 1–80 lbs throughout the day (10–25 lbs frequently; 25–50 lbs regularly; over 50 lbs occasionally)., • Use wrenches up to 10 lbs to tighten bolts (occasionally—up to 4 hours)., • Pulling forces: 10–25 lbs frequently; 25–50 lbs regularly; over 50 lbs occasionally; carry 50–75 lbs. Work Environment, • Outdoors 8–10 hours/day with exposure to heat and cold/humidity; regular work at heights; occasional work near moving machinery., • Frequent exposure to welding/burning fumes, odors, dust, gases, and elevated noise (up to 10 hours/day); regular hot temperatures; occasional cold; occasional driving of automotive equipment; regular exposure to oil/grease and vibration; occasional solitary work., • Hazards include mechanical (tools), electrical (welders), and radiant energy (torches), frequently up to 10 hours/day. Schedule & Training, • 8–10 hour shifts; work hours and rest days may change regularly., • Flexibility to work shifts, nights, weekends, and holidays., • Mandatory 4-week training program after hire. Reporting Line & Pay, • Reports to the line supervisor or work group supervisor., • Starting pay: $28/hour; rate based on Carman/Journeyman status. Qualifications, • Mechanical aptitude and experience., • Welding and cutting skills., • Ability to make sound decisions and reason through repairs; intermediate short-term memory and information gathering; limited planning/scheduling. About TTX TTX Company provides railcars and freight car management services across North America. Our diverse fleet supports intermodal, automotive, paper and forest products, metals, machinery, wind energy, and other markets where flatcars, boxcars, and gondolas are essential. We offer a robust Total Rewards package with Paid Time Off, Health, Dental, and Vision benefits, and a 401(k) with company match. This position participates in Railroad Retirement. Our Team Mission • Deliver reliable, cost-effective, and innovative railcar solutions., • Prioritize an injury-free workplace., • Develop a deep bench of subject matter experts and leaders at every level., • Drive product and process innovation for the railcar industry., • Continuously improve products, processes, and systems using modern design techniques and data analytics, aligned with TTX’s mission. Apply Posting Link: https://ejjc.fa.us6.oraclecloud.com/hcmUI/CandidateExperience/en/sites/CX/job/6545/?utmmedium=jobshare&utmsource=External+Job+Share Preferred Proficiencies • Heavy Equipment Repair, • Mechanical Troubleshooting Skills, • Pneumatics Troubleshooting, • Maintenance and Repair Skills, • Lift Truck Repair & Maintenance, • Diesel & Heavy Equipment Systems, • Equipment Diagnostics & Troubleshooting, • Mechanical Systems & Component Repair, • Equipment Repair & Maintenance, • Automotive Manufacturing Systems, • Automotive Repair & Service Systems, • Aircraft Maintenance Legal TTX Company is an Equal Employment Opportunity Employer. Note Management reserves the right to modify or adjust duties and essential functions at any time based on operational needs. The frequency of essential and marginal functions, use of equipment/tools, physical requirements, and working conditions may vary depending on railcar type, weather, and location-specific restrictions. However, all Maintenance Specialists are expected to perform the same core responsibilities.

Job Description Railcar Repairman (Carman) • Repairs, modifies, and upgrades rail cars., • Rebuilds car components: bolsters, side framers, hitch heads, and box car doors., • Welds (up to 30% of time), fabricates, and uses a cutting torch., • Performs mechanical labor (frequently - 95% of time)., • Repairs and maintains railcars, according to blueprints and other specifications, using hand tools, power tools, and precision measuring instruments. Inspects machines and equipment visually by touch, special knowledge, and training, to locate causes of trouble., • Operates forklift to move, align, and set in place parts in place., • Measures, cuts, and threads pipes and replaces air lines using hand tools., • Assembles subassemblies, major components, and equipment. Checks the function to test for proper operation., • Repairs broken parts using hand tools and welding equipment., • Enters car repair information via electronic keyboard system. MARGINAL FUNCTIONS: • Maintains a clean work environment., • May set up and operate metalworking tools, such as a welder or grinder., • All other duties as assigned by the supervisor. PERFORMANCE STANDARDS: • Must perform each job to specified time standards., • Work must be done to the customer's requirements (AAR, FMO, FRA, TTX, etc., standards)., • Must comply with all work rules., • Must work safely and not cause a threat to the health and safety of oneself and others. MACHINE/EQUIPMENT/TOOLS USED: • Circular saw., • Air impacts 1/2", 3/4", 1"; Air grinders 4", 7", 9"; Air or hydraulic portable power pump and ram used regularly., • Various hand tools are used frequently., • Cutting torch used for cutting frequently; heating torch used while bending regularly; side grinder used for grinding regularly; hoist used for lifting regularly; winch used for pulling regularly. SAFETY EQUIPMENT: • Steel-toe shoes, hard hat, earplugs, safety glasses, welding shield, burning goggles, grinding shield, and proper clothing (long-sleeved shirts and long pants while welding). PHYSICAL REQUIREMENTS: • Physical abilities (approximate times - vary slightly by location): standing, hearing, and seeing for 8 or 10 hours; handling for 6 hours; walking, stooping, kneeling, crouching, and fingering for 5 hours; reaching below waist, twisting, and feeling for 2 hours; sitting, climbing, balancing, crawling, reaching over head, and talking for 1 hour. Frequently: standing, kneeling, stretching, reaching, gripping tools or objects, and bending at the waist, • Regularly: walking, crouching, and twisting while standing. Occasionally: sitting, crawling, and twisting while sitting for 1 hour or less., • Lifting: car parts from 1-80 lbs. throughout the day (lifting 10-25 lbs. frequently; 25-50 lbs. regularly; over 50 lbs. occasionally)., • Wrenches weighing up to 10 lbs. to tighten bolts (occasionally - 4 hours)., • Pulling: 10-25 lbs. frequently; 25-50 lbs. regularly; over 50 lbs. occasionally; carrying 50-75 lbs. QUALIFICATIONS: • Knowledge: mechanical skills., • Skills: welding and cutting., • Mental factors: decision-making and reasoning; intermediate (such as determining when parts should be repaired); planning and scheduling - limited; compiling/classifying/gathering information - intermediate; short-term memory - intermediate. WORKING CONDITIONS: • Working environment: Requires outdoor work (8 or 10 hours/day; exposure to heat, cold/humidity; working at heights regularly; working around moving machinery occasionally., • Environmental Conditions: Exposure to welding and burning fumes, odors, dust, gases, and uncomfortable noises from welding and burning (10 hours/day); working in hot temperatures regularly; working in cold temperatures occasionally; driving automotive equipment occasionally; working with oil and grease regularly; working with vibrations regularly; and working alone occasionally., • Hazard Exposure: Mechanical from tools; electrical from welders; and radiant energy from torches frequently (10 hours/day). WORKING SCHEDULE: • 8 to 10-hour shifts; work hours and rest days may change regularly., • Must be available to work a flexible schedule, which may include shift work, nights, weekends, and holidays., • Must be available to attend a mandatory 4-week training program after hire. REPORTING RELATIONSHIP: • Reports to the line supervisor or work group supervisor. PAY RATE: • The pay rate for the Railcar Repairman position begins at $28/hour. Pay rate is determined based on Carman/Journeyman status. DISCLAIMER: Management reserves the right to modify or adjust duties and essential functions at any time based on operational needs. The frequency of essential and marginal functions, use of equipment/tools, physical requirements, and working conditions may vary depending on railcar type, weather, and location-specific restrictions. However, all Maintenance Specialists are expected to perform the same core responsibilities. About Us TTX Company is a leading provider of railcars and related freight car management services to the North American rail industry. TTX’s pool of railcars is ideal for supporting shippers in the intermodal, automotive, paper & forest, metals, machinery, wind energy and other markets where flatcars, boxcars and gondolas are required.TTX’s generous Total Rewards package includes Paid Time Off, Health, Dental and Vision benefits, and 401(k) with company match. This position participates in Railroad Retirement. TTX Company is an Equal Employment Opportunity Employer. About the Team What we do: Provide reliable, cost effective an innovative railcar solutions for the markets we serve. Ensure an injury-free work place. Build and develop a highly capable team of subject matter experts and leaders at every level in our organization. Bring new product and process innovation to the rail car industry. Continuously improve our products, processes and systems in a cost effective manner by using modern design techniques and data analytics. Achieve, maintain and support cross company alignment with the TTX company mission statement. Posting Link: https://ejjc.fa.us6.oraclecloud.com/hcmUI/CandidateExperience/en/sites/CX/job/6545/?utmmedium=jobshare&utmsource=External+Job+Share You should be proficient in: • Heavy Equipment Repair, • Mechanical Troubleshooting Skills, • Pneumatics Troubleshooting, • Maintenance and Repair Skills, • Lift Truck Repair & Maintenance, • Diesel & Heavy Equipment Systems, • Equipment Diagnostics & Troubleshooting, • Mechanical Systems & Component Repair, • Equipment Repair & Maintenance, • Automotive Manufacturing Systems, • Automotive Repair & Service Systems, • Aircraft Maintenance

Job Description We are hiring a Welder/Metal Fabricator for their Metal Fabrication company. The Welder/Metal Fabricator will be involved in all parts of the fabrication process, from raw material to finished product. This is a Temp to Perm opportunity, with company benefits once converted to Direct Hire. The Welder/Fabricator will have the opportunity to fabricate high profile projects throughout New York City! Welder/Metal Fabricator Responsibilities • Cut, assemble, and weld metal components for stairs, railings, and other structural projects using provided blueprints and specifications., • Review drawings and completed work to identify errors, troubleshoot issues, and ensure accuracy and quality standards are met., • Work independently and with team members to complete projects efficiently and within established timelines., • Assist with the handling, movement, and organization of materials throughout the fabrication facility. Welder/Metal Fabricator Requirements • Minimum 3 years of welding and fabrication experience, • Ability to read and interpret blueprints and technical drawings, • Strong attention to detail and commitment to quality workmanship, • Ability to work independently as well as collaboratively within a team environment Welding Test will be administered as part of the interview process Schedule: Monday – Friday Hours: 7am – 3:30pm (Overtime Availability) Pay: $21- $34/hr. depending on experience

Perform Electron beam welding on assemblies following procedures; able to set up and tend machines designed to weld through the use of a high-velocity electron beam.Review work orders to ensure familiarization with job requirements.Follow technical instructions, interpret engineering blueprints and

Perform Electron beam welding on assemblies following procedures; able to set up and tend machines designed to weld through the use of a high-velocity electron beam.Review work orders to ensure familiarization with job requirements.Follow technical instructions, interpret engineering blueprints and

This may include safety training, DOT, OQ, welder testing, and site-specific requirements.

Job SummaryPerform Electron beam welding on assemblies following procedures; able to set up and tend machines designed to weld through the use of a high-velocity electron beam. Perform welding using Heli-arc, Spot weld, and Electron Beam equipment. Inspect parts continuously to ensure that the weldi

Location: Bergen County, NJ | Compensation: $40$45/hour + Benefits | Schedule: MondayFriday, 6:00 AM3:30 PM A growing food manufacturer is seeking an experienced Fabricator / Sanitary Welder to support Engineering and Maintenance. This is a hands-on role for someone capable of independently taking stainless-steel fabrication projects from layout and fabrication through welding, finishing, installation, and turnover. • Fabricate, modify, install, and repair stainless-steel equipment, piping, tanks, conveyors, platforms, guarding, hoppers, and other components., • Perform high-quality TIG and MIG welding, including thin-gauge and sanitary stainless applications., • Lay out, cut, form, grind, polish, passivate, and finish stainless steel and other metals., • Read blueprints, weld symbols, P&IDs, schematics, and engineering drawings., • Build components from drawings and field measurements., • Support equipment installations, utility tie-ins, capital projects, and equipment upgrades., • Fabricate replacement parts to reduce equipment downtime., • Apply sanitary design standards using 304/316L stainless and food-grade materials., • Support troubleshooting, preventive maintenance, and continuous improvement., • Mentor less-experienced fabricators and maintenance technicians., • 7+ years of hands-on welding and fabrication experience., • 3+ years in food, beverage, dairy, pharmaceutical, or another sanitary manufacturing environment., • Advanced TIG and MIG stainless-steel welding skills., • Experience with sanitary tubing, Tri-Clamp fittings, weld ferrules, and butt welds., • Strong stainless-steel layout, fabrication, grinding, polishing, and finishing skills., • Ability to independently complete fabrication projects., • Ability to read engineering drawings, weld symbols, and P&IDs., • Knowledge of sanitary design, GMPs, food safety, and CIP systems., • AWS D1.6 or ASME Section IX certification is a strong plus., • Orbital welding experience preferred., • $40$45/hour, • MondayFriday, • Benefits, • Skilled fabrication work with significant autonomy, • Opportunity to support equipment improvements and capital projects, • Stable, growing food manufacturing environment Occasional weekend or shutdown work may be required.

Welder/FabricatorA growing food manufacturing facility in Bergen County is looking for an experienced Welder/Fabricator to join its night-shift team.

Welder / FabricatorCome explore opportunities within Brunswick, a global marine leader committed to challenging conventions and innovating next-generation technologies that transform experiences on the water and beyond.

Welder/FabricatorA growing food manufacturing facility in Bergen County is looking for an experienced Welder/Fabricator to join its night-shift team.

Interstate Waste Services - 800 Page Avenue - Responsibilities: Perform MIG welding, stick welding and torch cutting on steel containers and compactors; Assist in structural repairs such as lid attachment, bottom plate patching, caster bracket welding, and frame reinforcement; Grind and clean welds

Night Shift WelderA growing manufacturing organization in Northvale, NJ is seeking an experienced Night Shift Welder to join its team.

Ferguson - - Responsibilities: Weld outlets onto steel pipe for fire sprinkler industry; Perform specialty welding tasks (spool pieces, flanges); Inspect for defects, dimensions, alignment, end preparations, and seam splits; Maintain a clean and safe welding station; Report equipment malfunctions a

Fabricator / WelderLocation: Northvale, NJ Schedule: Monday–Friday | 4:00 PM–1:30 AM | Night ShiftAbout the OpportunityWe are seeking an experienced Senior Fabricator / Welder to join a food manufacturing operation in Northvale, NJ. Why This Role?This is an opportunity for an experienced fabrica

The A Welder / Fabricator is a senior-level technician responsible for high-quality welding, fabrication, and structural rebuilding of steel containers and compactors. The A Welder works independently on complex repair tasks and supports the training and development of entry-level team members. Ment

Welders-Direct HireWe're seeking Welders to work with a premier manufacturing client in Kearny, NJ.Direct HireJob SummaryThe Welder Class 2 is a mid-level welding position responsible for welding prefabricated components and fabricating assemblies from blueprints.The position requires the ability to

Job Description About PTS: Trusted, Responsive, and Nationwide Phillips Tank & Structure (PTS) is a growing, team-oriented, nationwide tank construction company with headquarters in Braddock, Pennsylvania, just outside of the City of Pittsburgh. We have over 190 employees and branch offices in Texas, California, Kentucky, and Hawaii. We specialize in designing, engineering, repairing, and constructing above-ground metal storage tanks and related structures, including welded tanks, bolted tanks, and geodesic domes. We have active projects in various industries, such as petroleum, power, chemical, and renewable fuels. At PTS, our commitment to our customers shapes everything we do. We have served companies across an array of industries, handling new tanks, repairs, and modifications. Our collective methodology, industry knowledge, and exhaustive range of abilities permit us to meet one-of-a-kind needs of our customers as they react to industry expectations. We believe in good quality and on-time delivery. We provide an excellent working relationship based on integrity and professionalism. Why Choose PTS? • Positive Work Culture: PTS employees experience a healthy blend of creativity, accountability, motivation, and improvement through team-based interactions with peers and other group members., • Professional Development: PTS is a growing company with many opportunities for advancement. PTS' systems-based approach to training and development helps employees quickly find the path to success in our company., • Intellectual Satisfaction: Being part of a team that executes unique and challenging projects throughout the country and actually builds something is an exciting endeavor. Our Core Principles • Service: The primary expectation for all employees at PTS is to focus on service. We are called to serve our customers as well as our co-workers and suppliers. We endeavor to build a cohesive team of employees who care about the well-being of the group., • Planning and Problem Solving: Planning and problem solving should be utilized to achieve productivity. We will strive every day to be organized and efficient in our approach. We will always look for better ways to achieve results rather than propagating inefficient or inaccurate methods., • Personal Development: Every employee should assist in the development of co-workers just as each employee should pursue their own personal development. Mentor and teammate relationships lay the groundwork for future growth and rewards. We are currently looking to hire a full-time Foreman/Tank Builder Job Duties: • Foreman are responsible for providing site supervision and site-based senior leadership of a PTS construction project. • Acts as point of contact with customer, vendors and subcontractors on site., • Works to maintain Safety, Quality and Productivity., • The Field Foreman is responsible for understanding the contract scope of work and for the identification of field-initiated scope changes (change orders). • Provides leadership regarding Safety on the jobsite. Fosters a Safety Culture within the crew., • Provides leadership regarding Quality on the jobsite. Eliminates “go-backs”, rejected or sloppy work. • Enhances field productivity. Consistently perform projects under budget and on time., • Balances customer satisfaction with profitability of the project. Keeps customers happy yet protects the company regarding scope changes and barrier time. • Provides craft knowledge and experience to the crew. Expertise in several areas of PTS specialty work (welding, structural erection, tank repair, new tank construction, rigging etc.) • Evaluates field employees and identifies those who are candidates for promotion. Provides guidance and training to assist in their development. Communicates the employee evaluation information to Construction Managers and HR. • Assists Construction Managers and HR in recruiting field workers., • Responsible for the care and maintenance of all tooling and equipment, and immediately calling equipment off rent when no longer needed • Utilizes experience and skills to identify opportunities for improvement of company practices and resources. • Represents PTS in a professional, positive light to customers and employees., • Provides a positive contribution to pre-construction planning effort., • Communicates well with the support staff (i.e. Design, Purchasing, PM, Admin), • Knows and understands the estimated manhours and scope on projects prior to job start. Works with PM in tracking progress weekly (Field Labor Reports). • Works with Safety Specialist, Construction Administration and HR to assure that employees assigned to upcoming or ongoing work have received the necessary training and certifications. This may include safety training, DOT, OQ, welder testing, and site-specific requirements. • Completes all necessary paperwork i.e. – daily time sheets, safety and quality audits, customer required paperwork, equipment inspections etc., • Advises Project Management of potential problems, work interferences, and schedule difficulties; assists in resolving such problems, as required. • Provides complete, final, project paperwork to Design Group at end of projects for creating of the Final QC Book. Requirements • Have great communication and organization skills., • The ability to solve problems and suggest improvements to our systems., • Have excellent attendance and show up to work on time every day., • The willingness to learn., • Be at least 18 years old., • Be able to lift 50 lbs., • Have a high school diploma or equivalent., • Be eligible to work in the United States., • Be willing to authorize background checks., • Have no criminal convictions for dishonesty, sexual misconduct, violence, or acts of terrorism., • Have a valid driver’s license., • Be willing to authorize motor vehicle driving record checks., • Be willing to submit to pre-hire, random, and post-incident drug and alcohol testing., • Ability to weld is a plus. Benefits: • Competitive Pay with annual reviews, • Health, Dental and Vision insurance, • 401k with company match, • Great culture of teamwork, learning and development., • Paid Time Off (accruing immediately), • You’ll be part of a team where YOU matter To Apply: If interested, complete the job application from our website at www.phillipstank.com/careers. We are an Equal Employment Opportunity employer. Powered by JazzHR 9fV7OtpanF

Job Description About PTS: Trusted, Responsive, and Nationwide Phillips Tank & Structure (PTS) is a growing, team-oriented, nationwide tank construction company with headquarters in Braddock, Pennsylvania, just outside of the City of Pittsburgh. We have over 190 employees and branch offices in Texas, California, Kentucky, and Hawaii. We specialize in designing, engineering, repairing, and constructing above-ground metal storage tanks and related structures, including welded tanks, bolted tanks, and geodesic domes. We have active projects in various industries, such as petroleum, power, chemical, and renewable fuels. At PTS, our commitment to our customers shapes everything we do. We have served companies across an array of industries, handling new tanks, repairs, and modifications. Our collective methodology, industry knowledge, and exhaustive range of abilities permit us to meet one-of-a-kind needs of our customers as they react to industry expectations. We believe in good quality and on-time delivery. We provide an excellent working relationship based on integrity and professionalism. Why Choose PTS? • Positive Work Culture: PTS employees experience a healthy blend of creativity, accountability, motivation, and improvement through team-based interactions with peers and other group members., • Professional Development: PTS is a growing company with many opportunities for advancement. PTS' systems-based approach to training and development helps employees quickly find the path to success in our company., • Intellectual Satisfaction: Being part of a team that executes unique and challenging projects throughout the country and actually builds something is an exciting endeavor. Our Core Principles • Service: The primary expectation for all employees at PTS is to focus on service. We are called to serve our customers as well as our co-workers and suppliers. We endeavor to build a cohesive team of employees who care about the well-being of the group., • Planning and Problem Solving: Planning and problem solving should be utilized to achieve productivity. We will strive every day to be organized and efficient in our approach. We will always look for better ways to achieve results rather than propagating inefficient or inaccurate methods., • Personal Development: Every employee should assist in the development of co-workers just as each employee should pursue their own personal development. Mentor and teammate relationships lay the groundwork for future growth and rewards. We are currently looking to hire a full-time Foreman/Tank Builder Job Duties: • Foreman are responsible for providing site supervision and site-based senior leadership of a PTS construction project. • Acts as point of contact with customer, vendors and subcontractors on site., • Works to maintain Safety, Quality and Productivity., • The Field Foreman is responsible for understanding the contract scope of work and for the identification of field-initiated scope changes (change orders). • Provides leadership regarding Safety on the jobsite. Fosters a Safety Culture within the crew., • Provides leadership regarding Quality on the jobsite. Eliminates “go-backs”, rejected or sloppy work. • Enhances field productivity. Consistently perform projects under budget and on time., • Balances customer satisfaction with profitability of the project. Keeps customers happy yet protects the company regarding scope changes and barrier time. • Provides craft knowledge and experience to the crew. Expertise in several areas of PTS specialty work (welding, structural erection, tank repair, new tank construction, rigging etc.) • Evaluates field employees and identifies those who are candidates for promotion. Provides guidance and training to assist in their development. Communicates the employee evaluation information to Construction Managers and HR. • Assists Construction Managers and HR in recruiting field workers., • Responsible for the care and maintenance of all tooling and equipment, and immediately calling equipment off rent when no longer needed • Utilizes experience and skills to identify opportunities for improvement of company practices and resources. • Represents PTS in a professional, positive light to customers and employees., • Provides a positive contribution to pre-construction planning effort., • Communicates well with the support staff (i.e. Design, Purchasing, PM, Admin), • Knows and understands the estimated manhours and scope on projects prior to job start. Works with PM in tracking progress weekly (Field Labor Reports). • Works with Safety Specialist, Construction Administration and HR to assure that employees assigned to upcoming or ongoing work have received the necessary training and certifications. This may include safety training, DOT, OQ, welder testing, and site-specific requirements. • Completes all necessary paperwork i.e. – daily time sheets, safety and quality audits, customer required paperwork, equipment inspections etc., • Advises Project Management of potential problems, work interferences, and schedule difficulties; assists in resolving such problems, as required. • Provides complete, final, project paperwork to Design Group at end of projects for creating of the Final QC Book. Requirements • Have great communication and organization skills., • The ability to solve problems and suggest improvements to our systems., • Have excellent attendance and show up to work on time every day., • The willingness to learn., • Be at least 18 years old., • Be able to lift 50 lbs., • Have a high school diploma or equivalent., • Be eligible to work in the United States., • Be willing to authorize background checks., • Have no criminal convictions for dishonesty, sexual misconduct, violence, or acts of terrorism., • Have a valid driver’s license., • Be willing to authorize motor vehicle driving record checks., • Be willing to submit to pre-hire, random, and post-incident drug and alcohol testing., • Ability to weld is a plus. Benefits: • Competitive Pay with annual reviews, • Health, Dental and Vision insurance, • 401k with company match, • Great culture of teamwork, learning and development., • Paid Time Off (accruing immediately), • You’ll be part of a team where YOU matter To Apply: If interested, complete the job application from our website at www.phillipstank.com/careers. We are an Equal Employment Opportunity employer. Powered by JazzHR 8LZ3NNYNQp