Trabajos welder en Kearny, New JerseyCrear alertas

The Welder I Perform Electron beam welding on assemblies following procedures; able to set up and tend machines designed to weld through the use of a high-velocity electron beam.

The Entry-Level B Welder is responsible for performing basic welding and repair tasks on steel waste containers and compactors. This position focuses on structural reinforcement, minor fabrication, and the restoration of worn or damaged units under s Welder, Welding, Equipment Maintenance, Transportation, Skilled Trades, Repair

Job Description Railcar Repairman (Carman) • Repairs, modifies, and upgrades rail cars., • Rebuilds car components: bolsters, side framers, hitch heads, and box car doors., • Welds (up to 30% of time), fabricates, and uses a cutting torch., • Performs mechanical labor (frequently - 95% of time)., • Repairs and maintains railcars, according to blueprints and other specifications, using hand tools, power tools, and precision measuring instruments. Inspects machines and equipment visually by touch, special knowledge, and training, to locate causes of trouble., • Operates forklift to move, align, and set in place parts in place., • Measures, cuts, and threads pipes and replaces air lines using hand tools., • Assembles subassemblies, major components, and equipment. Checks the function to test for proper operation., • Repairs broken parts using hand tools and welding equipment., • Enters car repair information via electronic keyboard system. MARGINAL FUNCTIONS: • Maintains a clean work environment., • May set up and operate metalworking tools, such as a welder or grinder., • All other duties as assigned by the supervisor. PERFORMANCE STANDARDS: • Must perform each job to specified time standards., • Work must be done to the customer's requirements (AAR, FMO, FRA, TTX, etc., standards)., • Must comply with all work rules., • Must work safely and not cause a threat to the health and safety of oneself and others. MACHINE/EQUIPMENT/TOOLS USED: • Circular saw., • Air impacts 1/2", 3/4", 1"; Air grinders 4", 7", 9"; Air or hydraulic portable power pump and ram used regularly., • Various hand tools are used frequently., • Cutting torch used for cutting frequently; heating torch used while bending regularly; side grinder used for grinding regularly; hoist used for lifting regularly; winch used for pulling regularly. SAFETY EQUIPMENT: • Steel-toe shoes, hard hat, earplugs, safety glasses, welding shield, burning goggles, grinding shield, and proper clothing (long-sleeved shirts and long pants while welding). PHYSICAL REQUIREMENTS: • Physical abilities (approximate times - vary slightly by location): standing, hearing, and seeing for 8 or 10 hours; handling for 6 hours; walking, stooping, kneeling, crouching, and fingering for 5 hours; reaching below waist, twisting, and feeling for 2 hours; sitting, climbing, balancing, crawling, reaching over head, and talking for 1 hour. Frequently: standing, kneeling, stretching, reaching, gripping tools or objects, and bending at the waist, • Regularly: walking, crouching, and twisting while standing. Occasionally: sitting, crawling, and twisting while sitting for 1 hour or less., • Lifting: car parts from 1-80 lbs. throughout the day (lifting 10-25 lbs. frequently; 25-50 lbs. regularly; over 50 lbs. occasionally)., • Wrenches weighing up to 10 lbs. to tighten bolts (occasionally - 4 hours)., • Pulling: 10-25 lbs. frequently; 25-50 lbs. regularly; over 50 lbs. occasionally; carrying 50-75 lbs. QUALIFICATIONS: • Knowledge: mechanical skills., • Skills: welding and cutting., • Mental factors: decision-making and reasoning; intermediate (such as determining when parts should be repaired); planning and scheduling - limited; compiling/classifying/gathering information - intermediate; short-term memory - intermediate. WORKING CONDITIONS: • Working environment: Requires outdoor work (8 or 10 hours/day; exposure to heat, cold/humidity; working at heights regularly; working around moving machinery occasionally., • Environmental Conditions: Exposure to welding and burning fumes, odors, dust, gases, and uncomfortable noises from welding and burning (10 hours/day); working in hot temperatures regularly; working in cold temperatures occasionally; driving automotive equipment occasionally; working with oil and grease regularly; working with vibrations regularly; and working alone occasionally., • Hazard Exposure: Mechanical from tools; electrical from welders; and radiant energy from torches frequently (10 hours/day). WORKING SCHEDULE: • 8 to 10-hour shifts; work hours and rest days may change regularly., • Must be available to work a flexible schedule, which may include shift work, nights, weekends, and holidays., • Must be available to attend a mandatory 4-week training program after hire. REPORTING RELATIONSHIP: • Reports to the line supervisor or work group supervisor. PAY RATE: • The pay rate for the Railcar Repairman position begins at $28/hour. Pay rate is determined based on Carman/Journeyman status. DISCLAIMER: Management reserves the right to modify or adjust duties and essential functions at any time based on operational needs. The frequency of essential and marginal functions, use of equipment/tools, physical requirements, and working conditions may vary depending on railcar type, weather, and location-specific restrictions. However, all Maintenance Specialists are expected to perform the same core responsibilities. About Us TTX Company is a leading provider of railcars and related freight car management services to the North American rail industry. TTX’s pool of railcars is ideal for supporting shippers in the intermodal, automotive, paper & forest, metals, machinery, wind energy and other markets where flatcars, boxcars and gondolas are required.TTX’s generous Total Rewards package includes Paid Time Off, Health, Dental and Vision benefits, and 401(k) with company match. This position participates in Railroad Retirement. TTX Company is an Equal Employment Opportunity Employer. About the Team What we do: Provide reliable, cost effective an innovative railcar solutions for the markets we serve. Ensure an injury-free work place. Build and develop a highly capable team of subject matter experts and leaders at every level in our organization. Bring new product and process innovation to the rail car industry. Continuously improve our products, processes and systems in a cost effective manner by using modern design techniques and data analytics. Achieve, maintain and support cross company alignment with the TTX company mission statement. Posting Link: https://ejjc.fa.us6.oraclecloud.com/hcmUI/CandidateExperience/en/sites/CX/job/6545/?utmmedium=jobshare&utmsource=External+Job+Share You should be proficient in: • Heavy Equipment Repair, • Mechanical Troubleshooting Skills, • Pneumatics Troubleshooting, • Maintenance and Repair Skills, • Lift Truck Repair & Maintenance, • Diesel & Heavy Equipment Systems, • Equipment Diagnostics & Troubleshooting, • Mechanical Systems & Component Repair, • Equipment Repair & Maintenance, • Automotive Manufacturing Systems, • Automotive Repair & Service Systems, • Aircraft Maintenance

ABOUT KGBL \n KGBL designs and manufactures unapologetically modern, meticulously handcrafted furniture \n and objects in our Brooklyn workshop. Our work spans fine furniture, custom millwork, and \n architectural projects, built across wood, metal, glass, stone, and upholstery. \n THE ROLE \n We're looking for a skilled metal worker/welder to join our Brooklyn shop, working primarily in \n non-ferrous metals with some related work in steel or stainless steel. Expertise in TIG welding \n metals is essential to the position. This is hands-on fabrication and finishing work on furniture \n and objects built to a high standard — precision, clean joinery, and refined surface finishing are \n central to the job. \n The ideal candidate comes from a fine furniture or sculpture background, where craft and finish \n quality carry the same weight as structural soundness. \n RESPONSIBILITIES \n – Fabricate and weld furniture components and structures in non-ferrous metals with related \n welding work in gin aluminum and steel \n – Perform precision welding to a high cosmetic standard, not just structural \n – Polish and finish metal surfaces — satin, brushed, and polished finishes across multiple \n metals \n – Read and work from shop drawings and templates with tight tolerances \n – Work to coordinate and assemble metal components with wood, glass, and stone elements \n – Maintain a clean, organized, safe metal shop area \n – Collaborate with the shop team on production timelines and sequencing \n QUALIFICATIONS \n – Experience welding non-ferrous metals with related welding work in gin aluminum and steel \n – Background in fine furniture fabrication or sculpture — comfortable with craft-level \n standards, not just structural welding \n – Strong metal finishing and polishing skills \n – Ability to work precisely from drawings and templates \n – Reliable, detail-oriented, and comfortable in a small shop environment \n DETAILS \n Location: Brooklyn, NY workshop \n Compensation: $25–$35/hour, based on experience \n

The Welder Class 2 is a mid-level welding position responsible for welding prefabricated components and fabricating assemblies from blueprints. The position requires the ability to independently set up welding equipment, interpret fabrication drawing Welder, Welding, Manufacturing, Staffing, Production, Fabrication

A growing food manufacturing facility in Bergen County is looking for an experienced Welder/Fabricator to join its night-shift team. This is a hands-on role supporting production equipment, facility needs, equipment modifications, repairs, and custom fabrication projects throughout the plant. Key Responsibilities • Perform TIG welding and stainless-steel fabrication, • Complete sanitary welding and fabrication on equipment used within a food production environment, • Fabricate, modify, repair, and install equipment and components, • Build and repair guards, brackets, frames, supports, and custom-fabricated pieces, • Perform cutting, fitting, grinding, measuring, layout, and finishing, • Work from blueprints, sketches, measurements, and existing equipment, • Support maintenance and engineering with equipment repairs, modifications, and improvement projects, • Maintain sanitary standards and proper weld finishes required for food-processing equipment Required Experience • Sanitary welding/fabrication experience – REQUIRED, • Strong TIG welding experience, • Strong stainless-steel fabrication background, • Experience producing clean, precise welds and sanitary finishes, • Experience working on equipment within food, beverage, pharmaceutical, dairy, cosmetic, medical, or another sanitary Manufacturing environment, • Ability to fabricate from prints, measurements, sketches, or existing equipment, • Strong cutting, fitting, grinding, layout, and finishing skills, • Ability to work independently on fabrication and equipment-repair projects Environment: Food manufacturing / sanitary production Schedule: Night Shift All qualified applicants will receive consideration without regard to race, age, color, sex (including pregnancy), religion, national origin, disability, sexual orientation, gender identity, marital status, military status, genetic information, or any other status protected by applicable laws or regulations. GPAC (Growing People and Companies) is an award-winning search firm specializing in placing quality professionals within multiple industries across the United States since 1990. We are extremely competitive, client-focused and realize that our value is in our ability to deliver the right solutions at the right time.

About Us ProAmpac is a global leader in flexible packaging – known for our innovation, customer service, and commitment to quality. We serve a wide range of industries with creative, sustainable solutions. Our five core values drive everything we do: Integrity • Intensity • Innovation • Involvement • Impact We are looking for a full-time, proactive Electro-Mechanical Maintenance Technician. The Electro-Mechanical Maintenance Technician performs repairs and preventative maintenance to equipment and facility. Utilizes both mechanical and electrical knowledge to service printing, laminating, slitting, bag converting, and facility support equipment used in the manufacture of Flexible Packaging. Compensation for this role is $30.70 per hour. What You’ll Do: • Support and contribute to a healthy and safe work environment following all workplace regulations, policies, and initiatives, including reporting all first aid injuries, accidents, and workplace hazards., • Ensure compliance with all applicable PPE and Food Safety policies and procedures, wear steel tipped shoes, hearing protection, safety glasses, hairnets, beard nets, etc., • Adhere to all lock out tag out procedures., • Work areas are clean and organized for safety and optimal efficiency., • Analyze test results, machine error messages, and operator observations to diagnose equipment problems., • Interpret blueprints and manufacturer manuals in the efficient operation of machinery., • Repair and perform predictive and preventive equipment maintenance demonstrating both mechanical and electrical knowledge related to hydraulic, pneumatic, schematics, control systems, general electric equipment, power distribution, power supply, drives, ac/dc motors, computer & PLC hardware., • Examine parts for defects, breakage or excessive wear and determine whether replacements can be ordered, fabricated, or assembled., • Ensure parts, supplies, and tools are requisitioned, inventoried, and available as necessary., • Perform necessary record keeping and maintenance logs of equipment., • Coordinate projects and responsibilities with skilled trades (machinist, welder, etc.) to minimize downtime of equipment., • Manage Universal Waste; used oil and filters in designated containers and properly labeled., • Demonstrate to and train machine operators on proper equipment functions and features., • Participate in Continuous Improvement projects and provide suggestions to improve processes., • Work in an around energized equipment, confined spaces, and at heights., • Attend and participate in all appropriate meetings., • Perform other duties/tasks as assigned by your supervisor or a member of the management team. What You Bring: Education & Experience: • High School Diploma or Equivalent, • Technical/vocational/military training in mechanical, electrical, Technical Skills: • Experience in Flexible packaging and/or printing, converting equipment a plus. Soft Skills: • Strong leadership and ability to execute change., • Effective communicator with clear, consistent messaging both verbally and in writing., • Motivated and self-directed., • Experience with computer-based applications, • Customer oriented., • Motivated and collaborative within a team environment., • Must be able to problem solve and communicate/coach effectively., • Good work ethic, attendance, and punctuality., • Must be flexible for overtime and shift assignment (off-shift, 24/7) What We Offer: • Competitive compensation with performance-based incentives and retirement savings plans with company match, • Customizable group benefits including health, dental, life, disability, and travel insurance, • Paid time off, • Career development opportunities, • A dynamic, inclusive work environment where your voice matters and your growth is supported Equal Opportunity Employer This employer is required to notify all applicants of their rights pursuant to federal employment laws. For further information, please review the _ notice from the Department of Labor.

Job DescriptionBenefits: • 401(k), • Dental insurance, • Health insurance, • Paid time off We are seeking a Welder And Boiler Mechanic to join our team! You will maintain and repair industrial production and processing machinery. Responsibilities: • Repair, install, and adjust industrial machinery and pipeline distribution systems, • Troubleshoot and repair defective equipment, • Perform routine preventative maintenance, • Respond to work order requests in a timely fashion, • Adhere to all safety policies and proceduresQualifications:, • Previous experience in machinery or other related fields, • Strong mechanical aptitude and troubleshooting skills, • Familiarity with industrial tools and equipment, • Ability to handle physical workload

Job Description Alternate Concepts, Inc. (ACI) and Herzog Transit Services, Inc. (HTSI), collectively the ACI/Herzog Joint Venture, along with our key subcontractors are seeking applicants for the Hudson Bergen Light Rail operation located in Hudson County, New Jersey. ACI was founded in 1989 with their corporate office located in Boston, MA and Herzog founded in 1969 with corporate offices located in St. Joseph, MO and Fort Worth, TX. Combined with our companies provide FRA/FTA compliant transportation, equipment maintenance, dispatching, right-of-way maintenance, facility maintenance and dispatching services for 20 distinct client properties. In addition to the Joint Venture being the upcoming operator/maintainer of the Hudson Bergen Light Rail, we currently jointly operate the Tren Urbano heavy rail service in San Juan, Puerto Rico and the CTDOT’s Hartford intercity service in Connecticut. ACI/Herzog Joint Venture, along with our key subcontractors, are currently seeking a Full-Time Track Maintainer to join our team. The starting pay rate for this position is $15.99 per hour. ACI-Herzog Joint Venture offers a competitive benefits package for eligible employees, including paid-time-off, medical, dental, and vision coverage; employer-paid life and AD&D insurance; short-term and long-term disability coverage; and a 401(k) retirement savings plan. Voluntary employee-paid benefits include supplemental life and AD&D insurance, critical illness, hospital indemnity, and accident coverage. The Track Maintainer is responsible for the maintenance, repair, inspection, and emergency response related to track within the Hudson Bergen Light Rail (HBLR) system. This role emphasizes safety, operational excellence, and effective team collaboration under varying conditions. Duties and Responsibilities: • Installs railroad track and embankments including special track work, road crossings, signage, and rail lubricators., • Capable of using hand and power tools and a wide variety of sizes and types of track machines including:, • Spike pullers, spike drivers, tie adze, hydraulic rail jacks, power wrenches, tie boring machines, rail drills, rail grinders, and rail saws., • Highway trucks equipped with rail guide wheels, hydraulic booms, and lift gates to remove and replace ties, rails, fasteners - cut or screw spikes, anti-creepers, bolts, elastic clips, insulators, rail seat pads, and conventional and insulated rail joints, special track work components, crushed rock ballast, crossing surfaces, paving, subgrade material, vegetation, signs, and structures., • May work as a member of a crew or independently., • May work under the direction of a Railroad Track Foreman or Track Welder., • Regular and consistent engagement, participation and promotion of ACI-Herzog’s Culture and its essential behaviors are a requirement for this position., • Regular and predictable attendance and punctuality are a requirement for this position., • Other duties as assigned. Qualifications: To perform this job successfully, an individual must be able to perform each essential duty satisfactorily. The requirements listed below are representative of the specific knowledge, skills, and/or abilities required. • Must be legal to work in the U.S.A., • Must possess a valid driver’s license., • Must be able to pass a pre-employment physical and drug screening as well as a background check and motor vehicle report review. Education and/or Experience: • High School diploma or equivalent., • Previous maintenance experience., • Ability to complete work under time pressures and to maintain composure under the stress of emergency situations., • Must be able to work well with others. Language Skills: • Able to read, write, and communicate (speak, hear, and understand) the English language in a work setting., • Ability to read and interpret documents such as safety rules, operating and maintenance instructions, and procedure manuals., • Ability to write regulatory and departmental reports and correspondence., • Ability to speak effectively before groups of customers or employees of the organization. Mathematical Skills: • Ability to work with mathematical concepts including but not limited to proficiency in adding, subtracting, multiplying and dividing all units of measure., • Ability to apply concepts such as fractions, percentages, ratios and proportions to practical situations., • Ability to compute ratio, rates, percentages and able to draw and interpret graphs and tabular data sets. Reasoning Ability: • Ability to solve practical problems and deal with a variety of concrete variables in situations where only limited standardization exists., • Ability to interpret a variety of instructions furnished in written, oral, diagram, or schedule form. Certificates, Licenses, Registrations: • Must successfully complete Light Rail operations training program and Light Rail Operator recertification annually., • Possession of a valid driver’s license and any other certificates, licenses and registrations as required by law to perform the specified functions., • Must be certified in CPR/AED. Physical Demands: The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. • The employee must be able to distinguish between visual colors., • While performing the duties of this job, the employee is regularly required to stand, walk, sit; use hands to finger, handle or feel; reach with hands and arms; climb or balance; stoop; kneel, crouch, or crawl; talk or hear; and taste or smell., • The employee must occasionally lift and/or move up to 75 pounds., • Specific vision abilities required by this job include close vision, and ability to adjust focus. Work Environment: The work environment characteristics described here are representative of those an employee encounters while performing the essential functions of this job. • While performing the duties of this job, the employee is occasionally exposed to moving mechanical parts and outside weather conditions. The noise level in the work environment is usually moderate. AHJV reserves the right to revise this job description from time to time. NOTE: The above statements are intended to describe the general nature and level of work performed by employees assigned to this position. They are not intended to be construed as an exhaustive list of all responsibilities, duties, and skills required of employees assigned to this job. It is the policy of ACI/Herzog Joint Venture to provide equal opportunity in employment for all qualified individuals regardless of race, color, religion, ethnicity, national origin, ancestry, disability, medical condition, age, citizenship, sex, sexual orientation, gender, gender identity, gender expression, marital status, pregnancy, genetic information, military status, veteran status, and any other characteristic protected by law.

This is your opportunity to obtain a dynamic and rewarding career at the Philips Latham, New York site where magnetic resonance imaging magnets are manufactured.Completing high quality TIG and MIG welds and using precision instruments.Cutting, bending, drilling, tapping, and similar operations as re

Job DescriptionDescription: KS Engineers, P.C. (KSE) is a mid-size engineering and construction management firm ranking in the ENR Top 500 for design and ENR Top 100 for construction management. We are headquartered in Newark, NJ, with regional offices in New York City and Newburgh, NY; Philadelphia and Pittsburgh, PA; Mount Laurel and Mount Arlington, NJ; and Rocky Hill, CT. The firm provides engineering, construction management, and land surveying services to both public and private sector clients. KSE offers a full range of employee benefits, including medical, dental and vision insurances, a 401(k) plan, paid time off, Flexible Spending Accounts (FSAs), long- and short-term disabilities, and term life insurance. KS Engineers, P.C. is an equal opportunity employer. We celebrate diversity and are committed to creating an inclusive environment for all employees. Position: Special Inspector – AWS CWI / ICC Welding - NY Reports to: Project Manager Technical Responsibilities: • Inspect weldments to ensure compliance with applicable codes, standards, and specifications, • Review welding procedure specifications (WPS), welder qualification records, and inspection reports prior to the start of welding activities, • Verify compliance with contract documents, submittals, and construction drawings, • Oversee non-destructive testing (NDT) and ensure proper materials and procedures are in place, • Identify and report non-conformance issues (NCRs) to contractors and clients in a timely manner, • Prepare and submit detailed daily inspection reports, • Maintain accurate documentation of all inspection activities and findings, • Coordinate with project teams, contractors, and clients to ensure quality and compliance Applicable Building Codes: • BC 1704.3.1, • BC 1704.17, • BC 1704.18, • BC 1704.26 Requirements: Professional Experience & Education\Certifications: • AWS Certified Welding Inspector (CWI) OR ICC Structural Steel & Welding Special Inspector Certification, • Entry-Level (3-5 years) or Mid-Level (6-9 years) with welding inspection experience, • Bachelor’s degree in engineering, Architecture, or related field (preferred), • Strong knowledge of welding codes, standards, and inspection procedures, • Excellent attention to detail and documentation skills Physical & Additional Requirement: • This position requires physical ability to perform field inspections, • Ability to work in diverse weather conditions, • Extended periods of standing and walking, possibly on uneven or challenging terrains, • Climbing, bending, kneeling, • Working long hours & Lift and carry up to 25 lbs., • Valid, clean driver’s license & must have a personal vehicle and be willing to travel daily to project sites across the NYC metro area, • Ability to transport inspection and testing equipment as needed KS Engineers, P.C. is an EOE/AA/VEV/Disabled Employer. KSE will not discriminate based on race, color, religion, creed, sex, national origin, marital status, age, disability, veteran status, citizenship status, or other status protected by law.

Job Description Job Summary We are seeking an experienced Welder or Welder-Mechanic with at least 5 years of hands-on welding and fabrication experience to join our team. The ideal candidate will be skilled in welding, metal fabrication, trailer and truck body repairs, and general repair work. Candidates with mechanical experience are highly preferred, as this role may also assist with preventive maintenance, inspections, and general fleet repairs. This position offers an opportunity to work on a variety of commercial trailers, straight trucks, liftgates, and tractors in a fast-paced repair environment. What We Offer • Competitive pay $35- $40 per hour, • Medical, Vision, Dental, Life Insurance, • 401k with employer contribution, • Vacation, Holidays and Sick days, • Stable full-time employment, • Opportunity for overtime, • Variety of challenging repair and fabrication work, • Growth opportunities for skilled technicians and mechanics Schedule: Sunday to Thursday 9pm - 5am Required Welding & Fabrication Experience • Minimum 5+ years of welding experience, • MIG (wire) welding, • TIG and stick welding, • Aluminum welding, • Metal fabrication and custom repairs, • Cutting, grinding, and finishing metal components, • Torch cutting and metal shaping, • Reading measurements and fabricating accurately from specifications, • Strong problem-solving and fabrication skills, • Body Repair Experience, • Preparation and painting of repaired components, • Body filler (Bondo) application and repair, • Repairing damaged body panels and structural components, • Ability to restore equipment to safe operating condition Primary Responsibilities • Perform trailer body repairs including:, • Sidewalls, • Floors, • Roofs, • Corner rails, • Top and bottom rails, • Floor beams and cross members, • Side, freezer, and liftgate steps, • Repair and replace trailer landing legs and associated components, • Repair straight truck bodies and structural components, • Diagnose and repair hydraulic liftgates (Maxon, Palfinger, Waltco, and others), • Fabricate custom parts, brackets, hooks, and components as needed, • Repair and weld rear axle/banjo housings, • Replace and paint tractor and truck hoods, • Replace and paint bumpers on tractors and straight trucks, • Maintain a clean and safe work environment, • Complete work efficiently while meeting quality standards Preferred Mechanical Experience • Candidates with mechanical experience will receive strong consideration and higher compensation. Additional responsibilities may include:, • Preventive Maintenance (PM) services, • DVIR (Driver Vehicle Inspection Report) repairs, • General trailer and truck maintenance, • Assisting with fleet repair operations as needed Qualifications • 5+ years of welding and fabrication experience, • Experience working on commercial trucks and trailers preferred, • Ability to safely operate welding, cutting, grinding, and fabrication equipment, • Ability to read measuring tools and perform precise fabrication work, • Strong attention to detail and workmanship, • Ability to lift heavy materials and work in a shop environment, • Valid driver's license preferred, • Mechanical repair experience is a plus If you're a skilled welder who takes pride in quality craftsmanship, or a well-rounded welder/mechanic looking for a long-term opportunity, we'd love to hear from you. Apply today!

Job Description Cutter/Welder Architectural Grille, a Division of Giumenta Corporation, located at 42 Second Avenue, Brooklyn, NY, 11215 is a family-owned and operated manufacturing company that has been in business since 1945. We are currently seeking a Cutter/Welder to add to our growing team. The schedule for this role is 7:00AM - 3:30PM. This dual-role position requires proficiency in both cutting and welding metal components with precision, ensuring the highest quality craftsmanship in line with our company standards. Duties and Responsibilities Cutting Responsibilities: • Safely operate saws to cut brass, bronze, stainless steel, and other metals., • Layout jobs as per blueprints, shop drawings, and other job orders., • Check mist oil levels and remove shavings before operating saws., • Maximize material usage by checking the availability of cut stock before using full-length materials., • Maintain the inventory of extruded stock and inform the Factory Manager when the stock is running low., • Ensure saw blades are properly maintained and inform the Maintenance Manager when they need to be replaced., • Ensure work areas and tools are clean, organized, and returned after use., • Dispose of scraps in appropriate bins. Welding Responsibilities: • Perform TIG welding on aluminum, brass, bronze, and steel with precision., • Produce neat, spill-free welds on cores and small, clean welds on frames., • Weld according to the job’s desired finish and verify squareness and job specifications upon completion., • Ensure welds are accurate, clean, and meet the highest standards., • Adhere to safety protocols at all times. Qualifications/Requirements: • 2+ years of cutting and welding experience., • Proficiency in TIG welding techniques and using a saw to cut various metals., • Strong attention to detail and precision work., • Problem sensitivity, creative thinking, and effective time management., • Ability to handle and move heavy materials (up to 50 lbs)., • Manual dexterity for handling tools, welding, and cutting equipment., • Neat, organized, and able to work independently and with a team., • Effective communication skills and adaptability to change. Working Conditions: • Physical Stamina for prolonged periods of standing, manual labor, and handling parts., • Near vision is required to see things at close range., • Must be able to lift and carry heavy materials (up to 50 lbs.)., • Work is conducted in a manufacturing environment with adherence to strict safety protocols. Americans with Disabilities Specifications: The physical demands described herein are representative of those that must be met by an employee to perform the essential functions of this job successfully. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. Pay Rate: $20 - $23/Hour Introductory Period: 90 Days After Thirty Days: • Health Care Insurance, • Paid Holidays Paid Time Off (PTO): • Beginning 1/1 after completion of six months: 10 days of paid time off, • Beginning 1/1 after completion of two years: 10.25 days of paid time off, • Beginning 1/1 after completion of three years: 10.38 days of paid time off, • Beginning 1/1 after completion of four years: 10.50 days of paid time off, • Beginning 1/1 after completion of five years: 15 days of paid time off, • Beginning 1/1 after completion of six to nine years: 20 days of paid time off, • Beginning 1/1 after completion of 10 years: 25 days of paid time off After One Year: • Ability to contribute to the company’s 401(k) plan, • Safe Harbor Plan Eligibility (3% of your salary), • Profit Sharing Plan Eligibility Other Opportunities: • Year-end performance bonus (if warranted), • Annual increase (if warranted), • Transit Check, • Voluntary Benefits from Extensis (Dental Plan, Vision Plan, Short Term Disability, Beyond Perks, Term Life Insurance, Flexible Spending, Long Term Disability, Credit Union, Group Home/ Auto Insurance, Critical Illness Insurance, Pet Benefit Plan, Section 529 College Savings, Prepaid Legal Services and Aflac)

Job Description WELDER / FABRICATOR Jersey City / Elizabeth, New Jersey Area Position: Welder / Fabricator Employment Type: Permanent, Full-Time Experience Required: Minimum 3 years of recent welding experience Location: Local candidates in the Jersey City / Elizabeth, New Jersey area preferred JOB REQUIREMENTS We are seeking an experienced Welder / Fabricator who can hit the ground running with minimal orientation and training. The ideal candidate will have: · 3+ years of recent welding and fabrication experience, including electric and gas welding. · Previous experience working with large sanitation, recycling, industrial, or similar equipment is strongly preferred. · Ability to read and understand blueprints and work independently. · Ability to take direction, learn the company's procedures, and then work independently with minimal supervision. · Prior welding technical school, vocational training, or equivalent welding education/experience. · Excellent communication skills. · Reliable, hardworking, dependable, and looking for a long-term career with an established company. · Reliable transportation and the ability to arrive at work on time every day. · Valid New Jersey driver's license and your own transportation. · Must be legally authorized to work in the United States. U.S. citizenship is preferred; permanent residents (green-card holders) are welcome to apply. · Ability to pass a background check. · Must be willing and able to pass a welding skills test and, if required, a drug screening. THE CANDIDATE WE SEEK We are looking for a skilled, dependable Welder / Fabricator with at least three recent years of hands-on welding experience. \nCompany Description · Stable company with long-term career opportunities · Competitive compensation · Overtime opportunities (when available) · Excellent work environment · Benefits package (where applicable) · Stable company with long-term career opportunities\r\n· Competitive compensation\r\n· Overtime opportunities (when available)\r\n· Excellent work environment\r\n· Benefits package (where applicable)

Job DescriptionDescription: Job description Come join the best heating service company in the NYC area! Controlled Combustion maintains one of the largest and most qualified licensed heating specialist staffs in the industry. Our service personnel, numbering more than 40 people, are members of the Metal Trades Branch-Local 638-A.F.L-C.I.O. That means they are highly qualified, highly competent professionals. In addition, they receive rigorous in-house training as well as ongoing instruction from factory authorized experts and educational institution to keep their technical knowledge current and their maintenance skills sharp. Our shop has earned the prestigious National Board Repair "R" Certificate of Authorization and Symbol Stamp and "U" Certificate of Authorization and Symbol Stamp attesting to our service expertise. Also, our technicians are certified ASME code welders. We maintain a Class "A" installers license in New York City and are licensed throughout the metropolitan area as well. Benefits: • Competitive Salary, • Local Union Health Benefits, • Local Union Retirement Pension, • Room for Growth! Benefits: • 401(k), • Dental insurance, • Health insurance, • Paid time off, • Retirement plan, • Vision insurance Schedule: • Monday to Friday, • Overtime, • Weekends as needed Application Question(s): • What skills do you have that help you perform this job?, • Please list any certifications you have., • Do you have a DOB Full Gas Work Card?, • Are you a member of Local Union 638? Experience: • Installation / Repair of Gas Piping: 1 year (Preferred), • Welding: 1 year (Preferred) License/Certification: • Driver's License (Preferred) Work Location: In person Requirements: Requirements: • Five (5) years experience under a Licensed Master Plumber, • DOB Full Gas Work Card, • Cutting, threading, and fitting black malleable steel piping, • Cutting, soldering, and braising copper piping, • ProPress fittings, • Knowledge of natural gas and fuel oil heating systems, • Knowledge of utility (ConEd and National Grid) procedures is a plus, • Electrical experience is a plus.

Job Description TIG WELDER An industry leader in the design, manufacturing and distribution of custom stainless-steel equipment for the food service, plumbing and materials handling industry is looking for experienced TIG welders responsible for fitting and welding of stainless steel parts using TIG process. PRIMARY RESPONSIBILITIES o Set up welding machines o Read and interpret blueprints and/or drawings to determine the specific welding requirements o Fit and TIG weld stainless steel components based on the specifications of the blueprints and/or drawings o Insure work conforms to prints and quality requirements. o Follow production plans and required daily output requirements. o Assists with material cutting and preparation as needed. Including sawing, grinding and deburring. o Keep work areas clean and organized and take proper care of all equipment and facilities o Provide a great level of attention to detail and focus on the given task o Follow all safety rules and quality standards o Work together with team members to maximize productivity and efficiency KNOWLEDGE AND SKILL REQUIREMENTS o High School Diploma or equivalent preferred o One-year related experience and/or training through a certified training facility. o Experience with stainless steel TIG welding required o Ability to lift up to 50 pounds independently. o must be able to stand, kneel, stoop. o Ability to identify and measure material types and thicknesses o Ability to produce quality products consistently o Ability to follow instructions given both verbally and in written form o Must be reliable with a strong work ethic We are an Equal Employment Opportunity Employer. We offer a competitive salary with great benefits. The position is full-time; Monday-Friday. 1st shift, 7:30 Am to 4:00 PM with some overtime. Benefits: o Retirement Plan o Health insurance o Paid time off Schedule: o 8-hour shift o Day shift o Monday to Friday o Overtime Work Location: One location

Job Description Role Snapshot Picture your day: you start with a safety huddle, review work orders, and step onto the track to bring railcars back to life. You’ll diagnose issues by sight, touch, and training; rebuild critical car components; and verify every repair against stringent rail industry standards. By the end of your shift, you’ll have logged precise repair notes via an electronic keyboard system and seen the direct impact of your craftsmanship on North America’s freight network. What You’ll Do • Repair, modify, and upgrade freight railcars to spec., • Rebuild key components, including bolsters, side framers, hitch heads, and boxcar doors., • Weld, fabricate, and use a cutting torch (welding up to 30% of your time; hands-on mechanical work approximately 95%)., • Use blueprints and technical specifications to perform mechanical repairs with hand and power tools and precision measuring instruments., • Inspect equipment by visual checks and tactile assessment using your specialized knowledge and training to pinpoint root causes., • Operate a forklift to move, align, and position components accurately., • Measure, cut, and thread pipe; replace air lines using appropriate hand tools., • Assemble subassemblies and major components; function-test to ensure proper operation., • Repair broken parts using hand tools and welding equipment., • Enter repair details and codes via an electronic keyboard system. Also Part of the Job, • Keep the work area orderly and clean., • Set up and operate metalworking tools (e.g., welder or grinder) as needed., • Pitch in on other tasks assigned by your supervisor. Performance & Quality Benchmarks, • Meet established time standards for each task., • Deliver work that meets customer and governing requirements (AAR, FMO, FRA, TTX, etc.)., • Follow all work rules and procedures., • Work safely at all times to protect yourself and your team. Tools & Equipment You’ll Use, • Circular saw., • Air impacts (1/2", 3/4", 1"); air grinders (4", 7", 9"); air or hydraulic portable power pump and ram (regular use)., • Common hand tools (frequent use)., • Cutting torch (frequent cutting); heating torch for bending (regular); side grinder for grinding (regular); hoist for lifting (regular); winch for pulling (regular). Required PPE, • Steel-toe shoes, hard hat, earplugs, safety glasses, welding shield, burning goggles, grinding shield, and proper clothing (long-sleeved shirt and long pants while welding). Physical Demands, • Approximate activity times (vary slightly by location): standing, hearing, and seeing for 8–10 hours; handling for 6 hours; walking, stooping, kneeling, crouching, and fingering for 5 hours; reaching below waist, twisting, and feeling for 2 hours; sitting, climbing, balancing, crawling, reaching overhead, and talking for 1 hour., • Frequent: standing, kneeling, stretching, reaching, gripping tools/objects, bending at the waist., • Regular: walking, crouching, twisting while standing. Occasional: sitting, crawling, twisting while sitting for 1 hour or less., • Lifting railcar parts from 1–80 lbs throughout the day (10–25 lbs frequently; 25–50 lbs regularly; over 50 lbs occasionally)., • Use wrenches up to 10 lbs to tighten bolts (occasionally—up to 4 hours)., • Pulling forces: 10–25 lbs frequently; 25–50 lbs regularly; over 50 lbs occasionally; carry 50–75 lbs. Work Environment, • Outdoors 8–10 hours/day with exposure to heat and cold/humidity; regular work at heights; occasional work near moving machinery., • Frequent exposure to welding/burning fumes, odors, dust, gases, and elevated noise (up to 10 hours/day); regular hot temperatures; occasional cold; occasional driving of automotive equipment; regular exposure to oil/grease and vibration; occasional solitary work., • Hazards include mechanical (tools), electrical (welders), and radiant energy (torches), frequently up to 10 hours/day. Schedule & Training, • 8–10 hour shifts; work hours and rest days may change regularly., • Flexibility to work shifts, nights, weekends, and holidays., • Mandatory 4-week training program after hire. Reporting Line & Pay, • Reports to the line supervisor or work group supervisor., • Starting pay: $28/hour; rate based on Carman/Journeyman status. Qualifications, • Mechanical aptitude and experience., • Welding and cutting skills., • Ability to make sound decisions and reason through repairs; intermediate short-term memory and information gathering; limited planning/scheduling. About TTX TTX Company provides railcars and freight car management services across North America. Our diverse fleet supports intermodal, automotive, paper and forest products, metals, machinery, wind energy, and other markets where flatcars, boxcars, and gondolas are essential. We offer a robust Total Rewards package with Paid Time Off, Health, Dental, and Vision benefits, and a 401(k) with company match. This position participates in Railroad Retirement. Our Team Mission • Deliver reliable, cost-effective, and innovative railcar solutions., • Prioritize an injury-free workplace., • Develop a deep bench of subject matter experts and leaders at every level., • Drive product and process innovation for the railcar industry., • Continuously improve products, processes, and systems using modern design techniques and data analytics, aligned with TTX’s mission. Apply Posting Link: https://ejjc.fa.us6.oraclecloud.com/hcmUI/CandidateExperience/en/sites/CX/job/6545/?utmmedium=jobshare&utmsource=External+Job+Share Preferred Proficiencies • Heavy Equipment Repair, • Mechanical Troubleshooting Skills, • Pneumatics Troubleshooting, • Maintenance and Repair Skills, • Lift Truck Repair & Maintenance, • Diesel & Heavy Equipment Systems, • Equipment Diagnostics & Troubleshooting, • Mechanical Systems & Component Repair, • Equipment Repair & Maintenance, • Automotive Manufacturing Systems, • Automotive Repair & Service Systems, • Aircraft Maintenance Legal TTX Company is an Equal Employment Opportunity Employer. Note Management reserves the right to modify or adjust duties and essential functions at any time based on operational needs. The frequency of essential and marginal functions, use of equipment/tools, physical requirements, and working conditions may vary depending on railcar type, weather, and location-specific restrictions. However, all Maintenance Specialists are expected to perform the same core responsibilities.

Job Description We are hiring a Welder/Metal Fabricator for their Metal Fabrication company. The Welder/Metal Fabricator will be involved in all parts of the fabrication process, from raw material to finished product. This is a Temp to Perm opportunity, with company benefits once converted to Direct Hire. The Welder/Fabricator will have the opportunity to fabricate high profile projects throughout New York City! Welder/Metal Fabricator Responsibilities • Cut, assemble, and weld metal components for stairs, railings, and other structural projects using provided blueprints and specifications., • Review drawings and completed work to identify errors, troubleshoot issues, and ensure accuracy and quality standards are met., • Work independently and with team members to complete projects efficiently and within established timelines., • Assist with the handling, movement, and organization of materials throughout the fabrication facility. Welder/Metal Fabricator Requirements • Minimum 3 years of welding and fabrication experience, • Ability to read and interpret blueprints and technical drawings, • Strong attention to detail and commitment to quality workmanship, • Ability to work independently as well as collaboratively within a team environment Welding Test will be administered as part of the interview process Schedule: Monday – Friday Hours: 7am – 3:30pm (Overtime Availability) Pay: $21- $34/hr. depending on experience

Job Description Seeking entry level welder to learn and grow. Reports to: Welding supervisor & Manager Responsibilities: cleaning, cutting, brushing, grinding, tacking, fitting, welding, using MIG & Stick Minimum Educational Qualifications High school Diploma /GED Minimum Previous Experience 1 year experience in shop setting

Job Description We are looking for a Welder - Diesel Mechanic - Machine Operator to join our team! You will be responsible for repairing various vehicles and equipment Responsibilities: • Repair Diesel Equipment, • Perform routine maintenance, • Use diagnostic tools to test vehicle components, • Perform quality inspections, • Machine Operator Qualifications: • Previous experience as a mechanic, • Knowledge of shop equipment, • Strong mechanical aptitude and troubleshooting skills, • Deadline and detail-oriented, • Ability to thrive in a fast-paced environmentCompany DescriptionSolid Waste Transfer Station visit www.Lemcortransfer.com for more informationSolid Waste Transfer Station visit www.Lemcortransfer.com for more information

Job Description The TIG Welder will perform layout, fabrication, installation, testing, and repair of shipyard or vessel welding projects. They will perform essential duties and responsibilities personally or through coordination with production and safety departments in our Brooklyn, New York location. The ideal candidate will operate accessory equipment and perform tasks necessary for welding metal, such as fusing metal segments, using gas tungsten arc, metal arc, flux-cored arc, plasma arc, and other types of welding arcs. Applicants must be proficient in welding Aluminum, Stainless Steel and Carbon Steel. Experience with Non-Destructive Examination is a plus. Candidates should have experience with reading and interpreting engineering drawings and technical specifications. Good interpersonal skills are required. Strong oral and written communication skills; a minimum of five to seven years of related experience and/or training within a marine setting; or the combination of education and experience that enables performance of all aspects of the position. Possession of AWS and/or NDT certifications a plus. Use of personal protective equipment such as respirators, hard hats and safety footwear is required while on work sites. Work will involve visiting work sites both indoors and outdoors at all times of the year. Reasonable accommodation may be made to enable individuals with disabilities to perform the essential functions of this position. Applicants must be legally authorized to work in the United States. Local applicants preferred; no relocation offered for this position. We provide equal employment opportunity for all applicants and employees and do not discriminate on the basis of race, ancestry, place of origin, color, ethnic origin, citizenship, creed, sex, sexual orientation, gender identity, gender expression, age, record of offences, marital status, family status, disability or any other characteristic protected by local, State or Federal law. We welcome and encourage applications from everyone. Bilingual to Spanish required.

Account Manager - Welding Consumables Remote - 50% Travel Welding background? Here's your next career move. Our client, an established global manufacturer of welding products, is growing, and it shows. They just opened an additional plant, they're investing in a new lab, and they've won Tesla, adding to a customer base that already counts GM among their biggest partners. This role is open because of growth too. The current Account Manager was promoted after a leadership retirement moved his manager up. Here, people who do good work move up. What you'll do About 80% of this role is taking care of existing business. You'll be the trusted partner for major automotive and industrial manufacturers, and you'll understand their welding processes as well as they do. • Own relationships with existing accounts and build contacts across each customer site, from the plant floor to purchasing., • Support customers with technical questions, quotes, samples, and troubleshooting., • Find ways to expand business with current customers, and pursue new opportunities directly or through distribution., • Work with domestic distribution partners to reach shared long-term goals., • Track competitor moves, such as new products, strategy shifts, and target accounts, and bring that intelligence back to the team., • Keep the CRM current and meet weekly with the North American Welding Segment Manager to review wins, issues, and the plan for the week ahead. What you bring • Hands-on welding background as a welder, welding technician, welding engineer, or similar. You understand how welding products perform in real manufacturing., • 1–2 years of sales or customer-facing experience. Industrial or automotive sales is a big plus., • A bachelor's degree in Welding Engineering, Electrical Engineering, or Marketing, or equivalent hands-on experience., • Strong communication skills and a knack for building relationships. You're persistent without being pushy., • Self-motivated and organized. You'll manage your own schedule from a home base., • Comfortable with CRM software and Microsoft Office., • Willing to travel about 50%, including overnight trips. Why join • Fully remote home base, with time on the road at customer sites., • A company that's investing in plant capacity, lab capability, and its people., • Marquee customers on the leading edge of automotive manufacturing., • Clear room to grow, as this role's history shows. If you've spent your career around welding and want to put that knowledge to work in a role with real impact, apply now or send me a message. #Welding #AccountManager #Sales #Automotive #Manufacturing #RemoteJobs #Hiring

This is your opportunity to obtain a dynamic and rewarding career at the Philips Latham, New York site where magnetic resonance imaging magnets are manufactured.Completing high quality TIG and MIG welds and using precision instruments.Cutting, bending, drilling, tapping, and similar operations as re

Perform Electron beam welding on assemblies following procedures; able to set up and tend machines designed to weld through the use of a high-velocity electron beam.Review work orders to ensure familiarization with job requirements.Follow technical instructions, interpret engineering blueprints and

You can create high quality TIG and MIG welds and you can perform excellent vacuum leak tight TIG welds on aluminum. Completing high quality TIG and MIG welds and using precision instruments.

Perform Electron beam welding on assemblies following procedures; able to set up and tend machines designed to weld through the use of a high-velocity electron beam.Review work orders to ensure familiarization with job requirements.Follow technical instructions, interpret engineering blueprints and

Ready to put your inspection skills to work with departments and teams that change the fabric of our community? Do you have a great attention to detail? Put your inspection expertise to work on complex projects. Parsons is now hiring a Senior Inspector for our rapidly expanding team. Parsons extensive experience combined with your attention to detail and skill with financial reconciliations, including analysis of accounts receivable and unbilled aging reports, and analysis of reserves. At this level, the Inspectors document nonconformance and may participate in determining appropriate resolution. In this role, you will perform the most difficult and complex inspection tasks, including assessing adherence to quality control procedures for steel. Inspects various facets of work on the construction site and performs continuous surveillance of assigned construction activities to ensure compliance with all applicable codes, standards, and specifications. Inspection activities are usually concentrated in one or more of the following areas: soils, concrete, steel, mechanical, or electrical. You may frequently serves in the capacity of Lead Inspector. Willingness to travel and/or to relocate to field sites is expected. Responsibilities: • Conducts tests to determine if work has been done in accordance with contract specifications and may include any of the following: Performs civil and structural tests, such as soil compaction, moisture content, aggregation, graduation, concrete slump, air entrainment, concrete compression, lines and grades surveys, bolt torques, and concrete coring., • Performs destructive and nondestructive tests on metals and other materials through magnaflex, dyepenetrant, radiographic, tension and compression, paint thickness, and resistivity., • Performs surveillance of underground piping to ensure tightness, bedding, and grade., • Inspects and monitors piling installation to ensure location and bearing., • Validates piping systems, including P&ID checks and hydraulic or other pressure tests., • Checks location of reinforcing steel before placement of concrete., • Inspects electrical installations to ensure proper grounding, circuit integrity, and adherence to statutory and customer regulations., • Performs continuing inspection of painting and insulation to ensure thickness and coverage continuity., • Provides general inspection on all construction labor and subcontracted tasks to ensure professional workmanship., • Verifies equipment alignment and balancing operations., • Administers welder qualification tests., • Recommends job safety practices and drafts safety reports., • Prepares quality control reports and recommends changes to procedures., • Performs other responsibilities associated with this position as may be appropriate. Qualifications: • Associate's degree in a technical discipline or construction related field and 10+ years of related experience on heavy construction projects, or a high school diploma and equivalent work experience, is required., • Formal certification from an independent organization, depending on type of inspection assignment., • Must be able to read and interpret blueprints and construction specifications and be thoroughly familiar with construction related processes related to area of assignment., • Have the potential to perform in a lead capacity Salary Range: $42.50 - $74.38 We value our employees and want our employees to take care of their overall wellbeing, which is why we offer best-in-class benefits such as medical, dental, vision, paid time off, Employee Stock Ownership Plan (ESOP), 401(k), life insurance, flexible work schedules, and holidays to fit your busy lifestyle! Parsons is an equal opportunity employer, and all qualified applicants will receive consideration for employment without regard to race, color, religion, sex, national origin, disability, veteran status or any other protected status.

Job SummaryPerform Electron beam welding on assemblies following procedures; able to set up and tend machines designed to weld through the use of a high-velocity electron beam. Perform welding using Heli-arc, Spot weld, and Electron Beam equipment. Inspect parts continuously to ensure that the weldi

This may include safety training, DOT, OQ, welder testing, and site-specific requirements.

Must have 4+ years welding experience.Must be able to successfully pass a weld test.Must have the ability to weld in 2g, 4g, and 6g conditions.Must be able to Stick and Tig weld on Pipe.Must have experience welding multiple types of pipes including but not limited to carbon steel, stainless, and chr

Welder/FabricatorA growing food manufacturing facility in Bergen County is looking for an experienced Welder/Fabricator to join its night-shift team.

Duties include: Fit up and welding steel tanks up to 4000 gallons Shearing and bending steel sheet and plate Fabricating sub-frames and trailer frames Fabricating a wide variety of componentsCapabilities Must have a good knowledge of MIG weldingFamiliar with Steel Fabricating Equipment, Shears, Brak

Entry-Level B WelderInterstate Waste Services is the most progressive and innovative provider of solid waste and recycling services in the country! We primarily service Northern New Jersey, Southern New York State, New York City, Connecticut, with a state-of-the-art rail served landfill located in O

Licensed Welder – X-ray Quality, New YorkLicensed Welder – X-ray quality, New York.

Ferguson - - Responsibilities: Weld outlets onto steel pipe for fire sprinkler industry; Perform specialty welding tasks (spool pieces, flanges); Inspect for defects, dimensions, alignment, end preparations, and seam splits; Maintain a clean and safe welding station; Report equipment malfunctions a

Offshore WelderQuality Construction and Production needs your Offshore Welding experience to help complete our construction projects safely and on time. Responsibilities and DutiesFabricate and repair equipment or piping by cutting, burning, and welding various metals. Clean and prepares surfaces to

Most work is local to York, PAStick weldingBlueprint readingMillwright experience is a plusMechanical aptitudeFabrication experience.

Interstate Waste Services - - Responsibilities: Perform advanced MIG welding, stick welding and metal fabrication on a variety of container types and compactor components; Rebuild or replace structural frames, bottoms, lids, caster brackets, and mechanical parts using custom-cut steel; Interpret re

Welder/FabricatorDonjon Marine, LLC, an established and expanding New Jersey-based Salvage and Diving company, is seeking an experienced, safety-driven, and reliable candidate to fill the role of a generic welder/fabricator in our Salvage Team. This is not a typical welder/fabricator position—each

Welders-Direct HireWe're seeking Welders to work with a premier manufacturing client in Kearny, NJ.Direct HireJob SummaryThe Welder Class 2 is a mid-level welding position responsible for welding prefabricated components and fabricating assemblies from blueprints.The position requires the ability to

Our client is a commercial and industrial boiler contractor serving building owners, property managers, hospitals, universities, manufacturers, and process facilities across New Jersey and the greater New York metropolitan area. Our work spans new boiler and boiler room installations, code repairs and alterations to pressure-retaining equipment, burner and controls retrofits, preventive maintenance agreements, emergency service, and efficiency upgrade projects. We are seeking a General Manager to take full operational and financial ownership of the business. This is a true P&L role. You will run service, construction, and shop operations day to day, own the numbers that ownership sees every month, protect and advance our code certifications, and build a durable leadership culture in a trade where skilled labor is scarce and loyalty is earned rather than bought. The right person is equal parts operator, financial thinker, and people leader comfortable in a boiler room at 2 a.m. and in front of a spreadsheet the next morning. This role exists to professionalize how the business runs without breaking what already works. You will inherit experienced field technicians and long-standing customer relationships. Your job is to raise margin, tighten execution, and modernize systems while keeping the crew intact and the phone answered. Profit & Loss Ownership You own the P&L outright top line, gross margin, overhead, and net. You will be accountable for annual budgeting, monthly forecasting, and the variance conversations that follow when actuals miss plan. • Build and defend the annual operating budget across every revenue line: service labor, preventive maintenance agreements, projects and retrofits, parts and equipment sales, rental, and shop work., • Own gross margin by division and by job. Understand where margin is made and where it leaks mispriced service calls, unbilled work, warranty rework, unmanaged overtime, change orders never captured., • Manage work-in-progress and percentage-of-completion reporting on project work, including over/under billings, cost-to-complete accuracy, and backlog quality., • Drive cash performance: billing velocity, DSO, retainage recovery, unbilled revenue, and vendor terms., • Approve pricing, quoting standards, labor rates, and markup structures; make the call on which work is worth chasing and which is not. Financial Reporting & Analysis Produce the monthly financial package that ownership relies on to make decisions. This is not accounting support work you are expected to build the reporting, interpret it, and act on it. • Assemble and present a monthly package including P&L with budget variance, gross margin by revenue line, backlog and WIP schedules, cash flow and aging, and KPI dashboards with commentary on what moved and why., • Build the operating metrics that run the business: technician billable utilization and labor efficiency rates, revenue per technician, first-time fix rate, callback percentage, average service ticket, quote-to-close conversion, PM agreement renewal and attachment rates, and overtime as a percentage of field labor., • Prepare capital request business cases for fleet, tooling, shop capacity, and headcount, with payback and return expectations stated plainly., • Develop customer-facing financial proposals for capital projects installed cost, projected fuel and efficiency savings, simple payback and lifecycle cost, and applicable utility incentive and rebate capture. Operations, Code Compliance & the R Stamp Program You are the executive owner of our quality and code program. You are not expected to personally perform inspections or weld, but you are expected to understand what our certifications require and to make sure the organization never puts them at risk. • Maintain the integrity of the company's National Board R Certificate of Authorization: enforce the Quality Control Manual in daily practice, support the designated QC Manager, manage the relationship with our Authorized Inspection Agency, and lead preparation for triennial National Board review and renewal audits., • Ensure repairs and alterations to pressure-retaining items are performed and documented to NBIC (NB-23) requirements, including R-1 and R-2 form execution, proper nameplate and stamping practice, and complete traceability of materials and welder qualifications., • Govern the welding program: ASME Section IX WPS, PQR, and welder performance qualification currency; continuity logs; and NDE coordination with third-party testing partners., • Apply ASME Section I, Section IV, and Section VIII Division 1 requirements appropriately across power boilers, heating boilers, and pressure vessels., • Enforce ASME CSD-1 controls and safety device requirements and NFPA 85 combustion safety practice on automatically fired equipment., • Own field execution across service dispatch, project scheduling, manpower planning, procurement and equipment lead times, subcontractor management, fleet, and shop throughput., • Own safety outcomes and the metrics that follow the company into every bid: TRIR, DART, and Experience Modification Rate. Lockout/tagout, confined space entry for boiler and vessel work, hot work, and respiratory protection are non-negotiable disciplines. Team Leadership & Change Management The technical problems in this business are solvable. The people problems are the hard part, and they are the reason this role exists. We are looking for high emotional intelligence someone who reads a room, hears what a technician is actually saying under a complaint, and can hold a hard line without humiliating anyone. • Lead a multi-disciplinary team spanning field service technicians, boilermakers and welders, project managers, estimators, dispatch, and administrative staff., • Introduce process, measurement, and accountability into an environment that has historically run on relationships and tribal knowledge and do it in a sequence the team can absorb. Sequencing and communication matter more than the changes themselves., • Build the succession bench: recruit, develop, and retain technicians in a labor market where the experienced boiler mechanic pool is shrinking and every competitor is fishing in the same pond. Own the apprenticeship and mentoring pipeline., • Set clear performance expectations, run consistent one-on-ones and reviews, coach the willing, and move decisively on the unwilling., • Serve as the escalation point for customer conflict, jobsite disputes, and internal friction de-escalating without conceding margin. Commercial Growth & Customer Retention • Grow recurring revenue through preventive maintenance agreements and full-coverage service contracts; improve renewal rates and expand scope within existing accounts., • Support estimating and bid strategy on larger installations and retrofits; sit at the table on the accounts that matter., • Position the company on efficiency-driven work burner and controls upgrades, condensing economizers, boiler plant optimization, fuel conversions, and decarbonization retrofits where regulatory pressure is generating demand., • Maintain relationships with OEMs, distributors, engineering firms, mechanical contractors, and property management groups.

Must be able to meet or exceed the requirement of the project through manual fabrication such as port alignment, scribing, cutting/coping, tacking, tuning and welding while maintaining angular tolerance's of +/- %, focal lengths and target points of +/-. Must be able to use Argon gas and TIG Weldin

Welder Job Duties: Expertly welds small, medium, and large bore pipe of various metals and alloys.

The Welder is responsible for very precise TIG Welding / Fabrication of custom chambers and/or components using customer supplied drawings and/or blueprints while holding tolerances of +/-.

Expertly welds small, medium, and large bore pipe of various metals and alloys.Solders and brazes of copper pipe.Performs complex mechanical installations per engineering direction.Reads and comprehends construction drawings and specifications.Lays out and installs piping, equipment, and other mecha

The Pipe Welder is responsible for welding, material preparation, blueprint interpretation, and verifying completed work conforms to project specifications.

Some examples of acceptable experience include: Pipe Welder, Pipefitter, Master Plumber, Plumbing Installer, Residential Plumber, Service Plumber. Job Title: Structure Maintainer - Group E (Plumber).

We are looking for a Welder - Yellow Diesel Mechanic to join our team! You will be responsible for repairing various vehicles and equipment.Repair Yellow Diesel Equipment.Use diagnostic tools to test vehicle components.Machine Operator skills to move equipment slated for repair.Previous experience a