Commissioning jobs in BillericayCreate job alerts

Basildon Salary - Negotiable DOE plus higher potential earnings due to some travel.Monday-Friday with Flexitime hoursThe company:Based in South Essex, you will be joining a purpose-built design and engineering premises for chemical manufacturing feeding into a wide range of industries, including the pharmaceutical industry. They are now able to appoint an Automation Engineer to join their team. As an Automation Engineer, you will work alongside the electricians and panel builders to assist in the design and build of the control systems and associated machinery. In addition, you will be involved in the designing of PLC-based electrical control systems from design specifications, programming PLC-configurable relay systems, as well as carrying out fault-finding on electrical control systems, PLC and hardwired systems. Essential duties and responsibilities: • Designing PLC-based electrical control systems., • Programming PLC, touchscreen, and safety systems, • Fault-finding electrical control systems, PLC systems etc., • Fault-finding electrical control systems, PLC, and hardwired systems - commissioning, support, and service work at customers' sites., • Previous experience in a similar role within a manufacturing environment., • Previous experience and understanding of PLC'S and control panels in a programming & writing environment, • Experienced with electrical control panels in an automated environment, • Qualified electrical apprentice or similar Hays EA is a trading division of Hays Specialist Recruitment Limited and acts as an employment agency for permanent recruitment and employment business for the supply of temporary workers. By applying for this job you accept the T&C's, Privacy Policy and Disclaimers which can be found at hays.co.uk

Basildon Salary - Competitive DOE Monday-Friday -37.5 hours per week .The company:Based in South Essex, you will be joining a well-known manufacturing company which specialises in the design, manufacturing, build and installation of automated machinery working in several industries.Due to large expansion, the company is now looking for an experienced Test Technician to join and be part of their manufacturing and validation team. Offering a range of benefits including flexi-start time, private healthcare, generous holiday allowance and more, this is an excellent time to join this fast-expanding company.The role will focus on performing tests on machines within the factory using prepared test protocols to support the verification process of the machines. Essential duties and responsibilities: • Execute test protocols as per company standards, • Completion of all relevant test documentation, • Reporting the incidents, deviations or failures identified during test execution, • Reporting on executed tests and outcomes Skills and Experience required: • Experience in a similar role within a manufacturing/engineering environment, • Formal engineering qualification, • Familiarity with automated production machinery and performing equipment testing on them, • Attention to detail What you need to do now if you're interested in this role: Click 'apply now' to forward an up-to-date copy of your CV, or call us now. If this job isn't quite right for you, but you are looking for a new position, please contact us for a confidential discussion about your career. Hays EA is a trading division of Hays Specialist Recruitment Limited and acts as an employment agency for permanent recruitment and employment business for the supply of temporary workers. By applying for this job you accept the T&C's, Privacy Policy and Disclaimers which can be found at hays.co.uk

Reed Engineering are currently representing a client who are currently seeking experienced time-served Mechanical Fitters, Workshop and Field Service Engineers to cover an array of sites and installation across Essex and surrounding areas. Candidate must have experience within the heavy engineering sectors, good rotating equipment knowledge and hand on skills and abilities. Scope is to maintain, repair, and overhaul various equipment assets such as pumps, turbines, valves, gearbox, conveyors, and coolers etc. The successful applicant will have the following profile:• A full driving license, preferably clean.• Be self-motivated to work individually but adaptable to work as part of a team.• Mechanical time-served and indentured to ONC & HNC, NVQ, or equivalent qualifications.• Able to communicate in a clear, concise, logical manner both verbally and written.• Fault finding, repair, installation and commissioning experience.• Good customer service skills.• Have a good level of fitness due to the physical demands of the job.• Be able to pass security clearances.• Have a flexible and positive outlook.• Be available for call out 1-5.• Flexibility to work away from home when needed.• Have relevant knowledge, training and experience within heavy engineering sectors specific to the requirements under roles and responsibilities. Responsibilities and Duties:• Mechanical repairs and maintenance to rotating equipment such as large turbines, array of pumps, BFW multi-stage. Additionally, auxiliary and BOP equipment such as gearboxes, coolers, conveyors and valves etc.• Perform mechanical maintenance; proficient in the use of measuring equipment such as micrometres, DTI’s, and alignment tooling.• To mechanically undertake and complete Workshop and Field Service activities inclusive of reporting detailing findings, condition assessments, critical tolerances, actions taken and recommendations.• To communicate on a technical level both verbally and written to peers and customers.• Fault finding and diagnosis of mechanical equipment associated but not limited to the heavy engineering sectors ‘working on an array of rotating machines, balance of plant and auxiliary systems.• Conduct defect repairs and routine maintenance on mechanical equipment for commercial and heavy industry machinery and ancillary equipment, ensure installations are to manufacturer standards & legislation requirements are adhered to.• Work alone to identify and resolve faults and concerns on mechanical systems without receiving explicit direction.• When required assist and lead planned projects and outages as directed by peers.• Effectively manage work schedule. Desirable and Technical Skills:• Previous experience; Power generation sector ‘prime movers and BOP.• OEM pump and or turbine experience.• Strong rotating equipment background.• Good technical abilities; measuring and reporting skills. If you feel you have the relevant skill sand experience for this role then please apply now.

Mechanical Engineers - Commercial & Heavy Industrial Competitive Salary + Bonus + Overtime Permanent, Full-time, South Essex If you’re a Mechanical Engineer who thrives on rotating equipment, heavy industry and real hands-on engineering, this is the kind of role that keeps you sharp We’re hiring experienced Workshop & Field Service Mechanical Engineers for a permanent opportunity based in West Horndon, covering sites across the UK (primarily the South East). You’ll split your time between workshop overhauls and on-site field service work, supporting critical industrial equipment The Role • Carry out mechanical repairs and maintenance on rotating equipment including large turbines and a range of pumps, • Maintain auxiliary and balance of plant equipment — gearboxes, coolers, conveyors, valves, • Use precision measuring equipment including micrometers and alignment tooling, • Diagnose faults across heavy engineering environments, • Complete detailed condition reports with clear technical recommendations, • Support and lead planned outages and projects, • Manage your workload effectively across workshop and field assignments, • Deliver high standards of workmanship in line with manufacturer and legal requirements What We’re Looking For • Mechanical qualifications — ONC, HNC, NVQ or equivalent, • Proven experience in fault finding, repair, installation and commissioning, • Strong background in rotating equipment within heavy industry, • Confident communicator — written and verbal, • Self-motivated and capable of working independently, • Full UK driving licence, • Able to pass security clearance Highly Desirable • Power generation experience (prime movers & BOP), • OEM pump or turbine experience, • Strong measuring, alignment and reporting skills, • Comfortable with callouts (1 in 5) and occasional working away What’s On Offer • Annual bonus and healthcare, • Uncapped overtime structure, • 40-hour week, Monday to Friday, • 28 days holiday plus bank holidays, • Company vehicle, PPE, uniform, tablet and tools provided, • Pension scheme, • Ongoing training and development This is a long-term opportunity within a respected engineering environment where your technical ability is genuinely valued If you want variety, responsibility and strong earning potential, apply today

Electrical Engineer – Commercial & Heavy Industrial Permanent, Full-time, South Essex This is not a routine maintenance role This is an opportunity to join a respected engineering services business delivering high-level electrical work across commercial and heavy industrial environments – the kind of projects that challenge you, develop you and properly reward you If you are confident in fault finding, comfortable working independently and take pride in high standards, this is worth a conversation The Opportunity • Diagnose and resolve complex electrical faults across commercial and heavy industrial systems, • Carry out maintenance, testing, rewiring and monitoring to manufacturer and 18th Edition standards, • Install, commission and inspect electrical systems to a high standard, • Lead and support planned outages and project work, • Provide professional advice and build strong client relationships, • Take ownership of problems and see them through to resolution What You’ll Need • Completed Electrical Indentured Apprenticeship, • Strong background in fault finding, installation, repair and commissioning, • 18th Edition compliant, • City & Guilds and 2391, • Experience within heavy engineering environments, • Full UK driving licence, • Ability to pass security clearance Highly Desirable • CompEx 1–4, • Power generation experience including prime movers and BOP, • HV systems, trace heating, motors and actuators, • Flexible approach to callouts (1 in 4) and occasional working away What’s In It For You • Competitive salary with strong earning potential, • Annual bonus and healthcare, • Uncapped overtime structure, • 40-hour week Monday to Friday, • 28 days holiday plus bank holidays, • Company vehicle, uniform, PPE, tablet and tools provided, • Pension scheme, • Ongoing training and genuine development opportunities If you’re ready for a role where your experience is valued, your earning potential isn’t capped and your work actually matters, apply now

Basildon Salary - Competitive DOE Monday - Friday -37.5 hours per week. The company: Based in South Essex, you will be joining a well-known manufacturing company which specialises in the design, manufacturing, build and installation of automated machinery working in several industries.Due to large expansion, the company is now looking for an experienced Machine Fitter/Technician to join and be part of their manufacturing team. Offering a range of benefits including flexi-start time, private healthcare, generous holiday allowance and more, this is an excellent time to join this fast-expanding company. Essential duties and responsibilities: • Work as part of a team involved with the build of large machinery and smaller assemblies, • Work to specific engineering drawings & specifications, • Mechanical fitting & assembly, • Conducting trials and tests on machinery Skills and Experience required: • Experience in a similar role within a manufacturing/engineering environment, • Ability to work to engineering drawings and specifications., • Formal engineering qualifications, • Assembly & machinery build experience What you need to do now if you're interested in this role: Click 'apply now' to forward an up-to-date copy of your CV, or call us now. If this job isn't quite right for you, but you are looking for a new position, please contact us for a confidential discussion about your career. Hays EA is a trading division of Hays Specialist Recruitment Limited and acts as an employment agency for permanent recruitment and employment business for the supply of temporary workers. By applying for this job you accept the T&C's, Privacy Policy and Disclaimers which can be found at hays.co.uk

Enclosure Equipment technician Basildon Monday-Friday 37.5 hours per week. Salary negotiable DOE You will be joining an ever growing manufacturing business who are looking to appoint an Enclosure Assembly Technician to assist in the machining, manufacturing and build-up of enclosures, equipment and machinery on our factory floor. The enclosure assembly role is varied and requires machining, fitting, assembly and fault-finding skills. Keen attention to detail and careful handling of the specialist materials is essential. Ability to maintain focus and care when actioning the tasks of higher repetition will be essential. Some of the typical duties are as follows: - • Preparation of base materials, machining and lock assembly., • Assembling frameworks and fitting to machinery lines., • Dis-assembly of tested lines and preparation of items ready for transport and assembly at customers sites, • Small amount of pneumatic assembly, • Good basic engineering skills, • Able to interpret equipment assembly drawings and maintain the high-quality finish and output levels expected by our customers., • Proven teamworking, attention to detail and good problem solver, • Practical engineering experience, particularly in mechanical assembly and machining, • Able to operate within the requirements of good health and safety discipline. Salary will be commensurate with qualifications and experience. A generous and comprehensive package of benefits is included. Applicants must have full UK working rights, as sponsorship is not available for this role. What you need to do now if you're interested in this role: Click 'apply now' to forward an up-to-date copy of your CV, or call us now. If this job isn't quite right for you, but you are looking for a new position, please contact us for a confidential discussion about your career. Hays EA is a trading division of Hays Specialist Recruitment Limited and acts as an employment agency for permanent recruitment and employment business for the supply of temporary workers. By applying for this job you accept the T&C's, Privacy Policy and Disclaimers which can be found at hays.co.uk

AV Control Systems Programmer – This is a new role in for an AV Systems Programmer that is looking for longevity in their new role. The position is working for a very busy audio visual residential systems integrator who are delivering bespoke home automation / custom AV installations. You will be a fully fledged Lover who enjoys creating bespoke programming solutions that comes with 4 -6 years of programming experience and is now looking to go to the next challenge. The positions will be a mix of on site upload and commission, office test / commissioning as well as occasional WFH. You experience would ideally encompass KNX / BMS and CRESTRON if you also have experience with LUTRON then please add this into your CV. This position would also suit someone that is client facing and is able to work with clients to produce desired systems and the desired touch panel layout. If this sounds like the new audiovisual programming position that you would like then please send me your full technical detailed CV ASAP. NO SPONSORSHIP IS ON OFFER YOU MUST BE IN THE UK AND WORKING HERE LEGALLY audio visual av a/v audio/visual video signal UI GUI lutron CRESTRON KNX BMS HVAC touch panel graphic design layout residential cedia smarthome automation intelligent bespoke custom installation CI cinema home theatre HTML HTML5 HTMLS LONDON KENT ESSEX HERTS HERTFORDSHIRE

Associate Mechanical Engineer Growth into Head of Building Services Design Essex - Billericay Area Up to £85,000 DOE + generous bonus structure (potential flexibility on salary depending on individual and experience) + car allowance + hybrid structure + chartership status + great company benefits Of all the Building Services Design positions I've worked on, this is one of the most exciting I've seen! This is an opportunity to work for a rapidly growing consultancy that has expanded to nearly 50 employees in just six years. They have built a strong presence across the UK by winning a significant number of high profile projects. This is an excellent opportunity for a Senior Mechanical Design Engineer who is eager to build and lead a growing mechanical team, with clear progression potential to become Head of Department for your division. If you're stuck in your average Senior Mechanical Engineer role and now looking for a step up, this is something that's definitely worth considering! The organisation is known for its supportive culture and genuinely values its staff, offering a highly competitive salary and a generous bonus scheme that rewards hard work and commitment. You’ll be joining at a pivotal time, contributing to a team that delivers technically challenging and impactful projects while enjoying a positive work environment with opportunities for professional development. This role will allow you to lead on mechanical design across a diverse portfolio including new builds, refurbishments, and mechanical system upgrades. You will have the autonomy to shape the mechanical engineering capability and work closely with project managers, clients, and contractors to ensure smooth project delivery from concept to completion. Overview: • Lead mechanical design for building services projects, focusing on HVAC, water, heating, and ventilation systems., • Develop detailed specifications, technical drawings, and ensure all designs meet statutory and client requirements., • Manage coordination with multidisciplinary teams, contractors, and stakeholders throughout project delivery., • Conduct site inspections and provide technical support during construction and commissioning phases., • Proven mechanical design experience within consultancy environments (ie residential, commercial, healthcare, education) ., • Strong understanding of building services mechanical systems and sector-specific requirements., • Be keen to obtain Chartered status if not already achieved How to apply? Jevon Astley-Jones is the consultant dealing with this vacancy, please get in touch or apply for more information.

Prior to commencing your application , ___ Permanent; Full-time Salary: Up to £38,000.00 per annum Location: Royal Opera House, Covent Garden The Royal Ballet and Opera continues to lead the way in opera, ballet, music and dance both live on stage and through multiple digital platforms, from live streaming to worldwide cinema screenings. Our Covent Garden theatre has been at the heart of London and British cultural life for three centuries. We are home to two world-class Companies: ___ and ___. The Royal Opera House describes the place we work, not who we are. The whole is always more than the sum of its parts – we may be a House, but three quarters of our audiences experience what we do outside this building. While our Covent Garden theatre is the nerve centre, the impact and influence of the organisation can be felt in every corner of the country, and around the world. Learning and Participation (L&P) is central to RBO’s mission of making the extraordinary for everyone. Our work in schools and communities up and down the country is driven by our free, curriculum-linked programmes, specially designed to inspire creativity, broaden participation and diversify the future of ballet and opera. These sit alongside industry-leading talent development projects, regional partnerships, and a raft of daytime events, family activities, exhibitions and concerts. We invest in teacher development for system change, drive innovation through digital learning and build a network of partnerships across the country and high levels of advocacy. To help with our ambitious growth strategy the team are looking to recruit a Digital Learning Producer, who will work closely with the Digital Strategy Manager to produce high-quality digital learning content for schoolteachers and students participating in the RBO Schools programmes. An ideal candidate for this post will be able to demonstrate: • Experience in creating highly engaging digital learning content for a range of audiences, including teachers and young people, • Experience of producing text, graphics, audio and video content, • Experience of using CMS functionality to edit web pages, • Experience of commissioning and managing internal and external graphic designers and video content creators as well as external production companies, • Understanding of creative process with a real flair for developing original ideas that learners find highly engaging and effective, • Confident image editing skills e.g., using Adobe Photoshop The Royal Ballet and Opera is one of the UK’s leading arts organisations and our aim is to inspire imagination, ignite emotion and make the extraordinary for everyone. Equality, Diversity and Inclusion underpin all that we do. We want our people to be representative of the diversity in the UK. We understand the creativity and innovation that diversity can bring and strive to create an inclusive environment in which everyone can thrive. We encourage applications from people with a wide range of backgrounds, experiences and skills to join our teams. We particularly welcome applications from those who are from a global majority background and/or those who are disabled, as they are under-represented within our organisation. We are a Disability Confident Employer, which means that we are actively working to ensure that candidates with disabilities and long-term health conditions feel supported, engaged and able to fulfil their potential in the workplace. We will endeavour to offer an interview to candidates who tell us they wish to participate in the scheme and who demonstrate in their application that they meet the essential criteria for the role, though sometimes due to the volume of qualified candidates with declarations this is not possible. The RBO is also committed to safeguarding and protecting all children, young people, and adults and we implement robust safer recruitment practices. Due to our safeguarding promise, certain roles will be subject to a DBS check before commencing employment with us, which will be indicated in the advertising. A full job description can be found ___. For more information about working with the Royal Ballet and Opera, ___ For a list of potential reasonable adjustments, ___ If you have any access requirements for your application, please contact the RBO Recruitment Team on If you are applying as an internal candidate, ___ Closing date for applications: 11:59pm, 15th March 2026 To ensure a fair process, late applications will not be considered under any circumstances. Applicants must have work authorisation for the UK. No agencies.

Job Description Astute's Power team is partnering with a specialist and fast growing mechanical and electrical services provider, delivering services to the power generation sector, to recruit an Electrical Installation and Commissioning Technician on a 3 month contract for its Purfleet site. The El

Basildon Salary - Competitive DOE Monday-Friday -37.5 hours per week .The company:Based in South Essex, you will be joining a well-known manufacturing company which specialises in the design, manufacturing, build and installation of automated machinery working in several industries. Due to large expansion, the company is now looking for an experienced Test Technician to join and be part of their manufacturing and validation team. Offering a range of benefits including flexi-start time, private healthcare, generous holiday allowance and more, this is an excellent time to join this fast-expanding company. The role will focus on performing tests on machines within the factory using prepared test protocols to support the verification process of the machines. Essential duties and responsibilities: • Execute test protocols as per company standards, • Completion of all relevant test documentation, • Reporting the incidents, deviations or failures identified during test execution, • Reporting on executed tests and outcomes Skills and Experience required: • Experience in a similar role within a manufacturing/engineering environment, • Formal engineering qualification, • Familiarity with automated production machinery and performing equipment testing on them, • Attention to detail, • Commissioning experience would be advantageous. Applicants must have full UK working rights, as sponsorship is not available for this role. What you need to do now if you're interested in this role: Click 'apply now' to forward an up-to-date copy of your CV, or call us now. If this job isn't quite right for you, but you are looking for a new position, please contact us for a confidential discussion about your career. Hays EA is a trading division of Hays Specialist Recruitment Limited and acts as an employment agency for permanent recruitment and employment business for the supply of temporary workers. By applying for this job you accept the T&C's, Privacy Policy and Disclaimers which can be JBRP1_UKTJ

A leading HVAC specialist in Basildon is looking for a skilled Test Bay Engineer to ensure the performance of naval refrigeration systems.

Electrical Engineer 60% Onsite in Benfleet, Essex 40% international travel to India, US, Mexico, Austria (you must be able to obtain work permits for these regions) Permanent, full-time The Role This is a hands-on engineering position that combines office-based project support with international travel to customer sites for installation, commissioning, and technical service. Working as part of the Electrical department, you'll be involved in a range of technical activities - PLC and HMI programming to supporting bespoke electrical equipment design and providing on-site customer support. Following a period of training, you'll take on a dual role with both project-based responsibilities and international field service work. Key responsibilities include: Providing office-based technical support to global customers Actively contributing to R&D projects in collaboration with cross-functional engineering teams. Travelling internationally for installation, commissioning, and service work Programming and fault-finding with PLCs, HMI software, and SCADA systems Supporting the coordination and delivery of customer-specific projects Liaising with internal departments including design, project engineering, and the electrical workshop Working with AutoCAD to support design and documentation processes Supporting the ongoing development of electrical systems, working closely with the Electrical Engineering Manager The Candidate The right candidate will bring a combination of electrical engineering knowledge and practical hands-on experience, ideally within a manufacturing, installation, or maintenance environment. We're looking for someone who: Holds at least an ONC in Electrical/Electronic Engineering (or higher) Has experience with PLCs, HMI software, and SCADA systems Has knowledge of or exposure to AutoCAD Understands Single and Three Phase Power Transformers (desirable) Has a background in electrical manufacturing, installation, or maintenance Is confident supporting customers both remotely and on-site Is eager to learn and develop new technical skills through supported training You should also be: Comfortable working across departments to deliver complex projects Willing and able to travel internationally to customer sites Detail-oriented, proactive, and committed to delivering high-quality technical work The Benefits International travel opportunities Ongoing training and professional development Exposure to advanced electrical systems in a global engineering business Supportive team environment with career growth potential

Commissioning Engineer Location: Essex Salary: £35,000 – £55,000 per annum Job Type: Permanent We are currently seeking a Commissioning Engineer to join our Automation team based in Essex. This role will involve supporting the delivery of automation projects through in-house testing and on-site commissioning, ensuring systems perform as designed prior to customer acceptance. The successful candidate will be responsible for executing detailed test protocols, validating system functionality, troubleshooting automation equipment and supporting installations both internally and at customer sites. Key Responsibilities Execution of I/O testing Running, verifying and troubleshooting PLC software, drives and networked systems Supporting installation, commissioning and after-sales support at customer sites Electrical fault finding and troubleshooting Executing company test protocols prior to acceptance testing Completing all required commissioning and test documentation Reporting incidents, deviations and test results to the project team Liaising with customer validation teams during Factory Acceptance Testing and site commissioning Providing feedback to improve commissioning and testing processes Maintenance and calibration of commissioning and test equipment Skills and Qualifications PLC troubleshooting experience including Siemens TIA Portal, Omron or Allen-Bradley Experience with drives including VFDs and servo systems (Altivar, Siemens) HMI and SCADA commissioning and troubleshooting such as WinCC or Tatsoft Experience with industrial networks such as Profinet and Ethernet/IP Understanding of electrical control schematics Experience integrating vision systems or ancillary automation equipment is beneficial Formal engineering qualification or apprenticeship preferred Good knowledge of Microsoft Office including Word and Excel Good understanding of automated machinery and industrial equipment Experience Required Minimum 2 years commissioning experience within industrial automation environments such as automotive, food and beverage, consumer goods or similar sectors Experience performing structured testing or commissioning procedures Desirable Experience testing automated equipment or machinery prior to customer acceptance This is an excellent opportunity to join a growing automation team working on a variety of advanced engineering and automation projects with opportunities for both workshop and site-based commissioning work

Mechanical Service Engineer Location: Brentwood, Essex Salary: £40,000 - £47,000 + Overtime + Bonus + Company Van Job Type: Full-Time | Permanent An established engineering services company supporting heavy industry is looking to recruit an experienced Mechanical Service Engineer to cover sites in and around the Brentwood area. This is a field-based role focused on mechanical maintenance, repair, and fault-finding of rotating equipment including pumps, turbines, motors, and Balance of Plant (BOP) systems within heavy industrial environments, ideally power generation. The Role: Diagnose, repair, and overhaul rotating equipment and auxiliary plant Carry out mechanical fault finding, inspections, and condition assessments Install and commission pumps, turbines, and associated equipment Produce clear technical service reports Support planned maintenance, shutdowns, and outages Use precision measuring equipment including micrometers and alignment tools Attend breakdown callouts and occasional overnight stays Work independently on client sites or as part of a wider engineering team Candidate Requirements: Mechanical Engineering qualification (ONC / HNC / NVQ Level 3 or equivalent) Proven experience in mechanical repair, installation, and commissioning Background in heavy industry (power generation highly desirable) Experience with OEM pumps or turbines advantageous Strong fault-finding and diagnostic skills Full UK driving licence Good communication and customer-facing skills Package & Benefits: £40,000 - £47,000 depending on experience Uncapped overtime Bonus scheme Travel and overnight allowances Company van and fuel card Tools, PPE, laptop and mobile phone Healthcare Pension 28 days holiday plus bank holidays Please note: Visa sponsorship is not available for this position. If you are a Mechanical Service Engineer within commuting distance of Brentwood and have experience in heavy industry, apply today or contact Julia at Prime Appointments for more information

Job Title: Test Technician Location: Essex Salary: £30,000 – £40,000 Job Type: Permanent Overview We are looking for a Test Technician to join our Documentation Department in Essex. The role will involve carrying out detailed testing of automated equipment before and during customer acceptance testing, ensuring systems operate as designed and meet required specifications. You will work closely with Project Managers, Automation Engineers, and Engineering Technicians to execute test protocols, report results, and support the delivery of high-quality automated machinery. Key Responsibilities Execute detailed test protocols for automated equipment Support Factory Acceptance Testing (FAT) and Site Acceptance Testing (SAT) Troubleshoot PLCs, HMIs, industrial networks, and associated automation systems Complete all required testing documentation and reports Identify and report incidents, deviations, or failures during testing Work with engineering teams to resolve issues identified during testing Provide feedback to improve testing processes and efficiency Liaise with customer validation teams during FAT and on-site testing Requirements Formal engineering qualification Basic understanding of PLCs, HMIs, and industrial networks such as Profinet or Ethernet/IP Understanding of automated equipment or production machinery Experience using MS Office, including Word and Excel Desirable Experience Previous experience performing formal testing on automated machinery or equipment Experience with commissioning or testing production line equipment Exposure to systems such as vision systems or weighing equipment This is an excellent opportunity to join a growing engineering environment and play a key role in ensuring the successful testing and delivery of automated systems

Basildon Salary - Negotiable DOE plus higher potential earnings due to some travel. Monday-Friday with Flexitime hours The company: Based in South Essex, you will be joining a purpose-built design and engineering premises for chemical manufacturing feeding into a wide range of industries, including the pharmaceutical industry. They are now able to appoint an Automation Engineer to join their team. As an Automation Engineer, you will work alongside the electricians and panel builders to assist in the design and build of the control systems and associated machinery. In addition, you will be involved in the designing of PLC-based electrical control systems from design specifications, programming PLC-configurable relay systems, as well as carrying out fault-finding on electrical control systems, PLC and hardwired systems. Essential duties and responsibilities: Designing PLC-based electrical control systems. Programming PLC, touchscreen, and safety systems Fault-finding electrical control systems, PLC systems etc. Fault-finding electrical control systems, PLC, and hardwired systems - commissioning, support, and service work at customers' sites. Working with other areas of the manufacturing team to support projects. This is just a summed-up list of responsibilities and other duties will be required. Skills and Experience required: Previous experience in a similar role within a manufacturing environment. Previous experience and understanding of PLC'S and control panels in a programming & writing environment Experienced with electrical control panels in an automated environment Qualified electrical apprentice or similar Ability to work in a team situation or alone . What you need to do now If you're interested in this role, click 'apply now' to forward an up-to-date copy of your CV, or call us now. If this job isn't quite right for you, but you are looking for a new position, please contact us for a confidential discussion about your career. Hays EA is a trading division of Hays Specialist Recruitment Limited and acts as an employment agency for permanent recruitment and employment business for the supply of temporary workers. By applying for this job you accept the T&C's, Privacy Policy and Disclaimers which can be found at hays.co.uk TPBN1_UKTJ

Job role: Mobile Vehicle Technician Up To £45,000 Basic + Overtime + Company Van + Paid Travel - Potential Earnings 50K Plus Bonus Schemes - Upskilling Training Shift: Monday - Friday - DAYS We’re looking for a Mobile Vehicle Technician to join clients leading engineering team, working across the south of the UK to service, maintain, and repair diesel engines within recycling & renewable energy sites. Full Training provided to up skill from vehicles to - Plant, Large engines, Generators, and associated machinery. The main responsibilities of the Mobile Vehicle Technician will include - • Service, Maintenance and Rebuilds of diesel engines, • Service, Maintenance and Repair of Mobile Plant Machinery - Material Handlers, Loading Shovels, Forklifts, Cranes, Skid Steers, • Service, Maintenance and Repair of power generation machinery - CHP units, Generators, Biogas systems., • Service, Maintenance and Repair of Conveyor Systems, Shredders, Balers Compactors., • Carrying out breakdown support on CHP units and generators, • Diagnosing and repairing faults on mechanical, electrical, and control systems, • Supporting installation, commissioning, and optimisation of new systems, • Delivering a high standard of customer service while working on client sites, • Working both independently and as part of a wider technical support team If you are interested in this Mobile Vehicle Technician role, please submit an up-to-date CV through this advert or contact the Eko team on (phone number removed)

Job role: Mobile Plant Fitter £60,000 - Overtime + Company Van + Paid Travel Bonus Schemes - Upskilling Training Shift: Monday - Friday - DAYS We’re looking for a Mobile Plant Fitter to join clients leading engineering team, working across the south of the UK to service, maintain, and repair recycling equipment of recycling & renewable energy sites. The main responsibilities of the Mobile Plant Fitter will include - • Service, Maintenance and Repair of Mobile Plant Machinery - Material Handlers, Loading Shovels, Forklifts, Cranes, Skid Steers, • Service, Maintenance and Repair of power generation machinery - CHP units, Generators, Biogas systems., • Service, Maintenance and Repair of Conveyor Systems, Shredders, Balers Compactors., • Carrying out breakdown support on CHP units and generators, • Diagnosing and repairing faults on mechanical, electrical, and control systems, • Supporting installation, commissioning, and optimisation of new systems, • Delivering a high standard of customer service while working on client sites, • Working both independently and as part of a wider technical support team If you are interested in this Mobile Plant Fitter role, please submit an up-to-date CV through this advert or contact the Eko team on (phone number removed) Biogas / CHP / Generator / Maintenance Engineer / Multi Skilled Engineer / Maintenance Technician / Generator Engineer / Generator Technician / FSE / CHP Engineer / Biogas Engineer / Diesel Engineer / HGV Technician / PSV Technician / Vehicle Technician / Service Technician / Anaerobic Digestion / Renewable Energy / Car Technician

Electrician Basildon £40,000 - £50,000 per annum NEOS Engineering are recruiting on behalf of a large-scale construction rental business for a JIB Approved Electrician (preferred) - the client are also open to assisting candidates that are close to achieiving their JIB Gold Card. The Role This role is responsible for the installation, testing, commissioning, and handover of temporary electrical systems supporting modular buildings and welfare units on construction sites. You’ll be working on live projects, delivering safe, compliant temporary power solutions to a high standard. Key Responsibilities Install electrical systems within temporary modular buildings and welfare units Carry out testing, inspection and commissioning of electrical installations Connect and configure LV distribution, temporary power supplies and generators Work from electrical drawings, layouts and specifications Ensure all works comply with BS7671, H&S regulations and site procedures Complete electrical test sheets, certification and commissioning documentation Fault finding and rectification during install and post-handover Liaise with site teams, supervisors and engineers to ensure timely delivery Maintain high standards of safety, quality and housekeeping on site The Ideal Candidate Fully qualified JIB Approved Electrician Experience working on construction sites or temporary site services Background installing electrics within modular units, welfare cabins or site compounds Confident with testing, inspection and commissioning Comfortable working across multiple sites in the Bristol region Professional, reliable and safety-focused Qualifications & Requirements JIB Gold Card – ESSENTIAL NVQ Level 3 / City & Guilds in Electrical Installation 18th Edition Wiring Regulations (BS7671) ECS / CSCS Card Full UK Driving Licence Salary & Package £40,000-£50,000 basic salary Company van Overtime available Pension and benefits package Long-term, stable role with a market-leading business

Basildon Salary - Competitive DOE Monday - Friday -37.5 hours per week. The company: Based in South Essex, you will be joining a well-known manufacturing company which specialises in the design, manufacturing, build and installation of automated machinery working in several industries.Due to large expansion, the company is now looking for an experienced Machine Fitter/Technician to join and be part of their manufacturing team. Offering a range of benefits including flexi-start time, private healthcare, generous holiday allowance and more, this is an excellent time to join this fast-expanding company. Essential duties and responsibilities: Work as part of a team involved with the build of large machinery and smaller assemblies Work to specific engineering drawings & specifications Mechanical fitting & assembly Conducting trials and tests on machinery Assembly, installation, commissioning, support and service work at customers' sites This is just a summed-up list of responsibilities and other duties will be required. Skills and Experience required: Experience in a similar role within a manufacturing/engineering environment Ability to work to engineering drawings and specifications. Formal engineering qualifications Assembly & machinery build experience Familiarity with automated production machinery would be beneficial. Applicants must have full UK working rights, as sponsorship is not available for this role. What you need to do now if you're interested in this role: Click 'apply now' to forward an up-to-date copy of your CV, or call us now. If this job isn't quite right for you, but you are looking for a new position, please contact us for a confidential discussion about your career. Hays EA is a trading division of Hays Specialist Recruitment Limited and acts as an employment agency for permanent recruitment and employment business for the supply of temporary workers. By applying for this job you accept the T&C's, Privacy Policy and Disclaimers which can be found at (url removed)

Mechanical Technician Essex £30,000 – £40,000 (depending on experience) We are looking to appoint a Mechanical Technician to join our engineering team and assist with the machining, manufacturing and assembly of enclosures, equipment and machinery on our factory floor. This is a varied and hands-on role, ideal for someone with strong mechanical skills and experience in assembly, machining and fault finding. The position will also involve occasional travel to customer sites worldwide to support installation and commissioning. Key Responsibilities Mechanical fitting and assembly work on the factory floor Conducting machinery trials and testing Piping, testing and fault-finding pneumatic logic circuits Assembly, commissioning and servicing of equipment at customer sites Supporting installation work when required Ensuring all work meets quality and safety standards Requirements Strong basic mechanical engineering skills Ability to interpret engineering drawings and assembly diagrams Practical experience in mechanical assembly and machining Exposure to pneumatics and fault finding would be beneficial Experience with installation or commissioning work is desirable Strong attention to detail and problem-solving ability Ability to work effectively both independently and within a team Recognised engineering apprenticeship or technical certification preferred Willingness to travel occasionally to support a global customer base What We Offer Salary between £30,000 – £40,000 depending on experience Opportunity to work on a variety of specialist engineering equipment Training provided on specialist machinery and systems A supportive engineering environment with opportunities to develop your skills This is an excellent opportunity for someone with a hands-on engineering background looking to develop their career in a varied mechanical engineering role

Are you an experienced Automation/PLC Engineer, with a background in pharmaceutical/chemical machinery? If so, this may be the role for you! I am currently recruiting on behalf of a machinery design & build company based near Billericay, who are looking for an experienced Automation engineer to join the team and contribute to the delivery of a variety of equipment. In this role, you'll be working with a range of tools including Siemens, Allen Bradley, and Omron, along with associated communication protocols and devices, to programme various bespoke machinery that will supply the pharmaceutical/chemical industries. You'll also be involved in the FAT/SAT and commissioning of the equipment. If you are an experienced Automation engineer & keen to step into a new role, please apply today! TPBN1_UKTJ

Job role: Electrical Generator Engineer Up To £70,000 + Overtime + Bonus Scheme - Company Van + Paid Travel Shift: Monday - Friday - DAYS We’re looking for a Electrical Generator Engineer to join clients leading engineering team, working across the south west of the UK to service, maintain, and repair generators. The main responsibilities of the Electrical Generator Engineer will include - • Performed maintenance, installation, and troubleshooting of electrical systems and automation equipment across all operational plant and machinery., • Maintained, calibrated, and repaired control, instrumentation, monitoring, and automation systems., • Delivered minor project work, including the design and implementation of new infrastructure and system improvements., • Acted as an Authorised Person for high-voltage (HV) switching operations, ensuring compliance with safety procedures., • Provided technical guidance and training to team members and the wider business to support safe and efficient operations., • Carrying out planned maintenance and emergency breakdown support on electrical systems within generators and chp units., • Diagnosing and repairing faults on electrical equipment, and control systems, • Supporting installation, commissioning, and optimisation of new systems, • Delivering a high standard of customer service while working on client sites, • Working both independently and as part of a wider technical support team If you are interested in this Electrical Generator Engineer role, please submit an up-to-date CV through this advert

AV Control Systems Programmer - This is a new role in for an AV Systems Programmer that is looking for longevity in their new role. The position is working for a very busy audio visual residential systems integrator who are delivering bespoke home automation / custom AV installations. You will be a fully fledged Lover who enjoys creating bespoke programming solutions that comes with 4 -6 years of programming experience and is now looking to go to the next challenge. The positions will be a mix of on site upload and commission, office test / commissioning as well as occasional WFH. You experience would ideally encompass KNX / BMS and CRESTRON if you also have experience with LUTRON then please add this into your CV. This position would also suit someone that is client facing and is able to work with clients to produce desired systems and the desired touch panel layout. If this sounds like the new audiovisual programming position that you would like then please send me your full technical detailed CV ASAP. NO SPONSORSHIP IS ON OFFER YOU MUST BE IN THE UK AND WORKING HERE LEGALLY audio visual av a/v audio/visual video signal UI GUI lutron CRESTRON KNX BMS HVAC touch panel graphic design layout residential cedia smarthome automation intelligent bespoke custom installation CI cinema home theatre HTML HTML5 HTMLS LONDON KENT ESSEX HERTS HERTFORDSHIRE

Client: My client are a mechanical and electrical building services contractor specialising in high end residential projects across London and the home counties. Trading for over 20 years, our client is recognised as a market leading MEP Residential contractor. Projects can range from £2m - £10m+ MEP value. Development of good working relationships with their clients is key to our client’s success. As a result, they benefit from a large amount of repeat business. The majority of our client base comes through personal recommendation, referrals and repeat business and includes numerous Tier 1 High End Residential Contractors. Role/Responsibilities: * Management of subcontractor labour * All health and safety * Progress Reporting * Review and amend RAMS * Understanding of design & drawings * Snagging * Testing and commissioning * Driving job * Overseeing all installation and managing a large group The ideal candidate: * Have 3 years’ experience managing multi-disciplined Electrical Services Installations. * Progressed from a tools background and have good technical knowledge of Electrical services. * Experience working in the commercial and residential sectors. In return they offer: * A healthy pipeline of work. * A real opportunity for growth and development. * The opportunity to move up the management ladder. * Join a business with an excellent staff retention rate who are on a significant growth trajectory

Basildon Salary - Competitive DOE Monday-Friday -37.5 hours per week .The company:Based in South Essex, you will be joining a well-known manufacturing company which specialises in the design, manufacturing, build and installation of automated machinery working in several industries. Due to large expansion, the company is now looking for an experienced Test Technician to join and be part of their manufacturing and validation team. Offering a range of benefits including flexi-start time, private healthcare, generous holiday allowance and more, this is an excellent time to join this fast-expanding company. The role will focus on performing tests on machines within the factory using prepared test protocols to support the verification process of the machines. Essential duties and responsibilities: Execute test protocols as per company standards Completion of all relevant test documentation Reporting the incidents, deviations or failures identified during test execution Reporting on executed tests and outcomes Liaising with customer validation teams during Factory Acceptance and on-site testing.This is just a summed-up list of responsibilities and other duties will be required. Skills and Experience required: Experience in a similar role within a manufacturing/engineering environment Formal engineering qualification Familiarity with automated production machinery and performing equipment testing on them Attention to detail Commissioning experience would be advantageous. Applicants must have full UK working rights, as sponsorship is not available for this role. What you need to do now if you're interested in this role: Click 'apply now' to forward an up-to-date copy of your CV, or call us now. If this job isn't quite right for you, but you are looking for a new position, please contact us for a confidential discussion about your career. Hays EA is a trading division of Hays Specialist Recruitment Limited and acts as an employment agency for permanent recruitment and employment business for the supply of temporary workers. By applying for this job you accept the T&C's, Privacy Policy and Disclaimers which can be found at (url removed)

Ready to find the right role for you? Salary: up to £52,000 per annum plus company vehicle and Veolia benefits Hours: 43 hours a week - Applicants must be able to cover a call-out roster of 1 in 4 weekends once trained Location: This is a regional mobile role covering London & South East: predominantly working at Kings College Hospital, Croydon Hospital, Lewisham Hospital, Lister Hospital in Stevenage, Selchp District heating in Bermondsey (SE London), supporting Airbus Stevenage as well as supporting The Royal Free Hospital When you see the world as we do, you see the chance to help the world take better care of its resources and help it become a better place for everyone. Whether you're looking to overhaul the industry, or just do a good day's work, we know that everyone here at Veolia can help us work alongside our communities, look after the environment, and contribute to our inclusive culture. What we can offer you: 25 days of annual leave plus bank holidays Refer an Engineer to us once you've joined and earn £1000 Access to our company pension scheme Free physiotherapy service Discounts on everything from groceries to well known retailers Access to a range of resources to support your physical, mental and financial health; so you can lean on us whenever you need to Ongoing training and development opportunities, allowing you to reach your full potential What you'll be doing: Pro-actively undertake daily operational and maintenance routines of Energy Centre equipment; including Steam Boilers, LTHW Systems, and associated equipment Carry out reactive and planned maintenance Carry out all works in line with Veolia health and safety policy, this may include supervision of contractors, permit to work and risk assessment Complete service reports and associated paperwork Provide an appropriate response to emergency situations Carry out diagnostic and fault finding to plant and equipment Carry out routine servicing and commissioning to plant and equipment Please note this role involves some lifting, working at heights and / or in confined spaces What we're looking for: Qualification in mechanical or electrical Industrial maintenance Experience in Operation of Steam Plant and Associated Equipment Be able to dismantle and reassemble boilers and associated equipment for annual inspections Proven good record of health and safety performance Ability to write and follow Risk assessments for specific tasks Ability to Follow Method Statements and amend as required Computer literate Full driving licence requiredWhat's next? Apply today, so we can make a difference for generations to come. We're proud to have been named as one of The Sunday Times Best Places to Work for three consecutive years in 2023, 2024 and 2025. This consistent recognition reflects our commitment to our people, demonstrating that Veolia is not just transforming the environment, we're also transforming what it means to have a rewarding, purposeful career. We're dedicated to supporting you throughout your application journey, offering adjustments where reasonable and appropriate. As a proud Disability Confident Employer, we will offer an interview to applicants with a disability or long-term condition who opt-in to the Disability Confident scheme, and meet the minimum criteria for our roles. We're also committed to ensuring that all applicants and colleagues receive fair treatment without discrimination on any grounds, aiming to create a diverse and inclusive workplace where everyone can thrive

Electrical Project Manager Basildon £400 – £450 per day Immediate start The Role We are currently looking for an Electrical Project Manager to join a well-established M&E contractor on an immediate basis, delivering commercial projects in and around Basildon. This is a contract position paying £400–£450 per day, depending on experience. The contractor will discuss the project specifics and scope in more detail at interview, but the work is expected to be primarily commercial in nature. Key Responsibilities Manage electrical packages from pre-construction through to handover Oversee site teams, subcontractors, and suppliers Ensure works are delivered on time, within budget, and to programme Coordinate with clients, consultants, and internal project teams Manage RAMS, H&S compliance, and quality control Attend site and client meetings, reporting on progress and risks Oversee testing, commissioning, and final handover documentation Requirements Proven experience as an Electrical Project Manager on commercial projects Background working for an M&E contractor Strong technical knowledge of electrical building services SMSTS (or equivalent) preferred Excellent communication and stakeholder management skills Ability to start immediately or at short notice Full details of the role and project will be discussed in more detail during an initial call or interview

About the Client Our Client is a specialist contractor delivering fire safety and ventilation compliance projects across residential and social housing portfolios. They partner with housing associations and property stakeholders to deliver planned works, upgrades, and remedial programmes to a high technical and regulatory standard. Roles/Responsibilities Manage Fire Alarm and AOV contracts from award through to completion, ensuring delivery against programme and commercial targets Provide technical support and guidance to engineers and supervisors, including troubleshooting and best-practice installation approaches Ensure works comply with relevant regulations, standards, and client specifications Coordinate scheduling, labour planning, materials, and resource allocation across multiple live sites Review technical drawings, scopes of work, and specifications to validate delivery requirements and identify risks early Support SNH contracts with a strong technical focus, ensuring consistent quality and compliance Liaise with clients, subcontractors, suppliers, and internal teams to maintain clear communication and smooth project delivery Monitor quality, documentation, and handover deliverables, ensuring close-out packs meet requirements Track performance, compliance, and project reporting using Microsoft Office tools (Excel/Outlook/Word) Qualifications Proven experience managing Fire Alarm contracts end-to-end Strong technical knowledge of Fire Alarm systems and AOV systems Hands-on background “from the tools” with practical experience in installation, commissioning, and fault-finding Experience working within residential and/or housing association environments Confident interpreting technical specifications, drawings, and scopes of work Strong organisational skills with the ability to manage multiple workstreams and priorities Clear communicator capable of supporting field teams and maintaining positive client relationships Benefits Company van or car allowance 25 days annual leave plus bank holidays

Lift Project Manager Lift Modernisation | Lift Industry Basildon, Essex Salary: £66,000–£75,000 Benefits: £5,000 Car Allowance or Electric Car | 34 Days Holiday | Private Pension | Hybrid Working | Health & Wellbeing Plan | Life Insurance (4x Salary) Marmon Lift Recruitment is seeking an experienced and results-driven Lift Project Manager to lead high-value lift modernisation projects. This is an opportunity to join a global lift engineering leader delivering landmark infrastructure and transport projects across the UK. Commutable from: Basildon, Chelmsford, Southend-on-Sea, Brentwood, Romford, London, Hornchurch, Dagenham, Barking, Ilford About the Lift Project Manager Role End-to-end responsibility for lift modernisation projects from planning to handover Management of a £3m portfolio across 3–4 live sites Full project ownership, supported by commercial and finance teams Delivery of complex lift modernisation and major infrastructure works Key Responsibilities: Lift Project Manager Deliver projects to programme, budget, quality and safety targets Oversee installation, testing, commissioning and client handover Ensure compliance with CDM, HSE and RAMS requirements Coordinate engineers, site teams, subcontractors and clients Lead site briefings, inspections and quality assurance Manage plant, lifting plans, temporary works and logistics Control costs, forecasting and reporting with commercial support Maintain project documentation, reporting and stakeholder communication Manage defects, snagging and project close-out What We’re Looking For: Lift Project Manager 5–7 years’ experience delivering lift engineering projects 3+ years managing teams across multiple sites Proven ability to lead projects from inception to completion Construction or project management qualifications SMSTS, Temporary Works Coordinator, Lifting Competency (or similar) Infrastructure project experience (rail, freight, etc.) is advantageous Strong communication, planning and HSE awareness Full UK driving licence Apply to this Lift Project Manager position: For a confidential conversation, call (phone number removed) (Monday–Friday) Ping us your CV by email At Marmon Lift Recruitment, we focus on understanding what matters most to you and representing your best interests throughout the recruitment process

Installation Engineer (Pumping Stations) £35,000 - £40,000 + Training + Progression + 33 days holiday + Overtime + Bonus scheme + On Call + Company Vehicle + Company Benefits Essex, covering a regional patch across Hertfordshire, Bedfordshire, Cambridgeshire, Norfolk and Suffolk Are you an Installation Engineer from a Pumping Stations / Water Pumps background looking for an exciting, autonomous role covering a regional patch within a leading company who offer stability and the chance to increase your earnings through a bonus, on call and overtime? This company are a leading provider of engineering solutions within the water industry to a varied client base. The company cover the full project lifecycle from design through to installation and servicing. This role will give you all the tools and support to really progress your career for a company that have consistently grown since and have ambitious growth plans going forward. In this role you will be working closely with a junior engineer to undertake installation and commissioning of systems within pumping stations. Further to this you will undertake liaison with clients and other key stakeholders as you cover a regional patch, with opportunities to increase your earnings through overtime and call outs. This varied role would suit an Installation / Commissioning Engineer from a Pumps or similar background within a company which invest in their staff, actively encourage progression and personal development. The Role: Carry out installation and commissioning of systems for Pumping Stations Train junior engineer, and liaise with key stakeholders and clients Covering a regional patch across Hertfordshire, Bedfordshire, Cambridgeshire, Norfolk and Suffolk Overtime and call outs to increase earningsThe Person: Installation / Commissioning Engineer Pumping Stations / Water Pumps background Looking for a Field based roleInstallation, Maintenance, Commissioning, Pumps, Pumping Stations, Water, Mechanical, Electrical, Water, Norwich, Ipswich, Peterborough, East Anglia, Hertfordshire, Cambridgeshire, Luton, Essex Reference Number: BBBH24208 If you're interested in this role, click 'apply now' to forward an up-to-date copy of your CV. We are an equal opportunities employer and welcome applications from all suitable candidates. The salary advertised is a guideline for this position. The offered renumeration will be dependent on the extent of your experience, qualifications, and skill set. Ernest Gordon Recruitment Limited acts as an employment agency for permanent recruitment and employment business for the supply of temporary workers. By applying for this job, you accept the T&C's, Privacy Policy and Disclaimers which can be found at our website

Air Conditioning Engineer Essex / Basildon / Southend On Sea Our clientOur client is a UK-based engineering business specialising in air conditioning, HVAC and climate control solutions across commercial and retail environments. It provides full lifecycle support including design, installation, commissioning, service, maintenance and energy optimisation of air conditioning systems. The company works across multi-site portfolios, supporting clients in sectors such as retail, commercial offices, distribution, and public sector estates. Are you a skilled Building Services Engineer who takes pride in delivering a first-time fix and exceptional customer service We’re looking for experienced Air Conditioning Engineers to join our growing team, delivering high-quality reactive and planned maintenance across our client portfolio. This isn’t just another service role — it’s about solving problems properly, identifying root causes, and being the trusted technical expert our customers rely on. The RoleYou’ll be responsible for carrying out reactive and pre-planned maintenance, ensuring permanent solutions — not temporary fixes. Your day-to-day will include: Completing scheduled PPM tasks to agreed SOPs and service levels Responding to reactive callouts within agreed timeframes Fault finding, diagnostics and root cause analysis Advising customers and account managers on required repairs Maintaining high workmanship standards — clean, professional and compliant Updating PDA and in-store systems in real-time Managing van stock to maintain a high first-time fix rate Ordering parts and liaising with Service Desk when required Identifying additional works and supporting quotation processes You’ll operate independently, confidently working from drawings and technical documentation, while maintaining strong communication with customers and internal teams. Skills & Experience Proven experience in Air Conditioning/Chillers NVQ level 2/3 Strong fault-finding and diagnostic ability Experience working within commercial environments Ability to work independently without direct supervision Strong communication skills and customer-facing confidence Professional attitude and appearance Full UK Driving Licence Salary & Package 45-50k (OTE 60K) Field-Based Role Company Van Provided Pension scheme On Call 1 in 8 Generous On call

Job Title: Electrical Estimator Location: Brentwood, Essex Salary: £75,000 + package About the Role You will play a crucial role in providing accurate, competitive and timely cost estimates for electrical projects spanning commercial fit‑outs, design‑and‑build electrical installations, technical systems and associated works. The successful candidate will work closely with the commercial team, project managers, engineers, suppliers and subcontractors to support profitable project delivery in line with quality and compliance standards. Key Responsibilities Prepare detailed, accurate cost estimates for electrical works based on tender information, drawings, specifications, and scope of works. Analyse design documents and project requirements to identify materials, labour, plant and subcontractor packages. Liaise with suppliers, subcontractors and internal stakeholders to obtain competitive prices and build robust estimates. Review and quantify electrical installation works including lighting, power, controls, structured cabling, fire alarms, EV charging and other systems typical of modern fit‑out and construction projects. Ensure all cost assumptions, exclusions and risk allowances are clearly documented. Contribute to bid submissions, clarifications and tender presentations. Support value engineering initiatives to optimise cost without compromising quality. Maintain and update estimating databases and cost libraries. Monitor market rates and trends for labour, materials and plant. Work with project and contracts teams post‑award to manage changes and cost control. Person Specification / Requirements Essential: Proven experience as an Electrical Estimator in commercial construction or electrical contracting, ideally within design & build environments. Strong understanding of electrical installations and systems (lighting, small power, distribution boards, testing & commissioning). Excellent commercial awareness and numerical skills. Ability to read and interpret technical drawings, MEP specifications and bill of quantities. Proficiency in estimating software and Microsoft Office applications. Strong supplier and subcontractor engagement skills. Excellent organisational skills; able to manage multiple tenders to tight deadlines. Desirable: HNC / HND in Electrical Engineering, Construction Management or related discipline. Membership or working knowledge of industry standards (e.g., NICEIC/IEC, JIB). Knowledge of commercial fit‑out electrical requirements (CAT A/B, structured cabling, fire systems). What We Offer Competitive salary of £75,000 per year. Package negotiable Career progression and training opportunities. A collaborative and supportive working environment focused on growth and innovation

Electrical Engineer – Commercial & Heavy Industrial Permanent, Full-time, South Essex This is not a routine maintenance role This is an opportunity to join a respected engineering services business delivering high-level electrical work across commercial and heavy industrial environments – the kind of projects that challenge you, develop you and properly reward you If you are confident in fault finding, comfortable working independently and take pride in high standards, this is worth a conversation The Opportunity • Diagnose and resolve complex electrical faults across commercial and heavy industrial systems, • Carry out maintenance, testing, rewiring and monitoring to manufacturer and 18th Edition standards, • Install, commission and inspect electrical systems to a high standard, • Lead and support planned outages and project work, • Provide professional advice and build strong client relationships, • Take ownership of problems and see them through to resolution What You’ll Need • Completed Electrical Indentured Apprenticeship, • Strong background in fault finding, installation, repair and commissioning, • 18th Edition compliant, • City & Guilds and 2391, • Experience within heavy engineering environments, • Full UK driving licence, • Ability to pass security clearance Highly Desirable • CompEx 1–4, • Power generation experience including prime movers and BOP, • HV systems, trace heating, motors and actuators, • Flexible approach to callouts (1 in 4) and occasional working away What’s In It For You • Competitive salary with strong earning potential, • Annual bonus and healthcare, • Uncapped overtime structure, • 40-hour week Monday to Friday, • 28 days holiday plus bank holidays, • Company vehicle, uniform, PPE, tablet and tools provided, • Pension scheme, • Ongoing training and genuine development opportunities If you’re ready for a role where your experience is valued, your earning potential isn’t capped and your work actually matters, apply now

Basildon Salary - Negotiable DOE plus higher potential earnings due to some travel. Monday-Friday with Flexitime hours The company: Based in South Essex, you will be joining a purpose-built design and engineering premises for chemical manufacturing feeding into a wide range of industries, including the pharmaceutical industry. They are now able to appoint an Automation Engineer to join their team. As an Automation Engineer, you will work alongside the electricians and panel builders to assist in the design and build of the control systems and associated machinery. In addition, you will be involved in the designing of PLC-based electrical control systems from design specifications, programming PLC-configurable relay systems, as well as carrying out fault-finding on electrical control systems, PLC and hardwired systems. Essential duties and responsibilities: Designing PLC-based electrical control systems. Programming PLC, touchscreen, and safety systems Fault-finding electrical control systems, PLC systems etc. Fault-finding electrical control systems, PLC, and hardwired systems - commissioning, support, and service work at customers' sites. Working with other areas of the manufacturing team to support projects. This is just a summed-up list of responsibilities and other duties will be required. Skills and Experience required: Previous experience in a similar role within a manufacturing environment. Previous experience and understanding of PLC'S and control panels in a programming & writing environment Experienced with electrical control panels in an automated environment Qualified electrical apprentice or similar Ability to work in a team situation or alone. What you need to do now If you're interested in this role, click 'apply now' to forward an up-to-date copy of your CV, or call us now. If this job isn't quite right for you, but you are looking for a new position, please contact us for a confidential discussion about your career. Hays EA is a trading division of Hays Specialist Recruitment Limited and acts as an employment agency for permanent recruitment and employment business for the supply of temporary workers. By applying for this job you accept the T&C's, Privacy Policy and Disclaimers which can be found at (url removed)

Job role: Field Service Engineer £50,000 - Overtime + Company Van + Paid Travel Industry Training Shift: Monday - Friday - DAYS We’re looking for a Field Service Engineer to join clients leading engineering team, working across the south of the UK to service, maintain, and repair generators, Biogas plants, plants, CHP Systems and associated plant machinery. The main responsibilities of the Field Service Engineer will include - • Carrying out planned maintenance and emergency breakdown support of Generators., • Diagnosing and repairing faults on mechanical, electrical, and control systems, • Supporting installation, commissioning, and optimisation of new systems, • Delivering a high standard of customer service while working on client sites, • Working both independently and as part of a wider technical support team If you are interested in this Field Service Engineer role, please submit an up-to-date CV through this advert or contact the Eko team on (phone number removed)

Enclosure Equipment technician Basildon Monday-Friday 37.5 hours per week. Salary negotiable DOE You will be joining an ever growing manufacturing business who are looking to appoint an Enclosure Assembly Technician to assist in the machining, manufacturing and build-up of enclosures, equipment and machinery on our factory floor. The enclosure assembly role is varied and requires machining, fitting, assembly and fault-finding skills. Keen attention to detail and careful handling of the specialist materials is essential. Ability to maintain focus and care when actioning the tasks of higher repetition will be essential. Some of the typical duties are as follows: - Preparation of base materials, machining and lock assembly. Assembling frameworks and fitting to machinery lines. Dis-assembly of tested lines and preparation of items ready for transport and assembly at customers sites Small amount of pneumatic assembly Assembly, commissioning, support and service work at customers' sites The candidate will need to have the following skills/attributes: - Good basic engineering skills Able to interpret equipment assembly drawings and maintain the high-quality finish and output levels expected by our customers. Proven teamworking, attention to detail and good problem solver Practical engineering experience, particularly in mechanical assembly and machining Able to operate within the requirements of good health and safety discipline. Recognised Engineering certification/apprenticeship Training will be provided to familiarise the successful applicant with the specialist machinery and equipment. Salary will be commensurate with qualifications and experience. A generous and comprehensive package of benefits is included. Applicants must have full UK working rights, as sponsorship is not available for this role. What you need to do now if you're interested in this role: Click 'apply now' to forward an up-to-date copy of your CV, or call us now. If this job isn't quite right for you, but you are looking for a new position, please contact us for a confidential discussion about your career. Hays EA is a trading division of Hays Specialist Recruitment Limited and acts as an employment agency for permanent recruitment and employment business for the supply of temporary workers. By applying for this job you accept the T&C's, Privacy Policy and Disclaimers which can be found at (url removed)

Are you ready to advance your career in marine technology? Our partner are growing their national team of Marine Electronics Technicians and Engineers, whether you're just starting out or an experienced professional ready to lead projects and mentor others, we have the right opportunity for you. Join a dynamic team that delivers cutting-edge navigation, communication, and safety systems to commercial vessels. You’ll be working hands-on with industry-leading equipment, ensuring vessels remain operational, compliant, and connected. The company value initiative, technical skill, and a customer-first approach; if that sounds like you, we want to hear from you. What You’ll Be Doing: Installing and commissioning marine electronics on vessels Performing maintenance, repairs, and equipment surveys Supporting customers with diagnostics and fault resolution Identifying service opportunities and recommending solutions Delivering projects across the UK and occasionally overseasWhat We’re Looking For: HNC/HND in Electronics or Electrical Engineering (or equivalent) Experience in: Marine or field-based electronics Electronic navigation and communication systems Fault-finding and installation Technical support and project engineeringSkills: Strong problem-solving ability Clear communication and customer-focused mindset Essential: Full UK driving licenceDesirable (but not essential): GMDSS Operator’s Certificate Radio/VDR Survey or Class Approval experience BOSIET/OLF Certification Manufacturer-specific trainingMedical: Must be able to pass a medical and annual working at height training What’s On Offer: Competitive salary (based on qualifications and experience) Company car Employer contribution pension scheme Career development pathways from Technician to Senior Engineer Training opportunities and autonomy in your roleApply now and be part of the future of marine electronics. TT

Job Title: Principal Engineer - Civil Salary: £50,000 to £65,000 (dependent on experience) Location: Essex & Suffolk region Type: Permanent | Hybrid working About the Role: Our client is strengthening its engineering capability within the Essex & Suffolk region and is seeking an experienced Principal Civil Engineer to play a key role in delivering major water and wastewater infrastructure programmes. You will work across a diverse portfolio of projects valued at circa £280m, supporting long-term frameworks in the water sector. Reporting to the Regional Discipline Lead or Senior Design Manager, you'll take technical ownership of civil designs while mentoring engineers and helping embed best practice across the team. The role is predominantly region-based, with some initial travel to other UK regions to support onboarding and integration into the wider business. About the Client: Our client is a leading integrated design-and-build provider operating exclusively in the UK water sector. With a strong regional presence and a track record of delivering complex, regulated infrastructure projects, they focus on practical, sustainable engineering solutions. They place genuine emphasis on people development, diversity, wellbeing, and long-term career progression - not just delivery metrics. Key Responsibilities: Produce cost-effective, buildable civil design layouts that meet specification and commissioning requirements Consider full whole-life and out-turn costs, including design, materials, construction, and interdisciplinary impacts Apply standard practices wherever possible to maintain efficiency and competitiveness Support bid and proposal development with estimates and technical input Ensure designs are fully coordinated with all internal and external disciplines Develop, review, and maintain engineering procedures and processes Maintain accurate design records and documentation throughout project lifecycles Champion customer satisfaction across all stakeholders Supervise, mentor, and develop junior and mid-level engineers Ensure all designs fully comply with environmental, health, and safety requirements Promote safe working practices and continuous improvement across the team What Our Client is Looking For: Strong technical grounding across civil engineering disciplines including structures, geotechnics, hydraulics, and environmental engineering Solid knowledge of CDM 2015 roles and responsibilities Working knowledge of UK water industry standards and legislation Proven experience delivering water and wastewater treatment infrastructure Experience managing and developing engineering teams Chartered or working towards chartership with a recognised professional institution Relevant civil or related engineering degree Ability to rationalise designs and develop efficient plant layouts Confident communicator able to present technical proposals clearly Strong IT skills and a full UK driving licence Flexible, analytical mindset with the ability to manage complex data sets What Our Client Offers: Competitive salary package Hybrid working (role-dependent) Car or car allowance (role-dependent) 25 days annual leave plus bank holidays Option to buy up to 5 additional days' holiday Pension contribution scheme Life assurance Health and private medical insurance Additional benefits including cycle-to-work scheme, discount platforms, and family perks Eligibility: Applicants must have the right to work in the UK and be willing to travel regionally as required. Opportunity for Growth: This is a senior, visible role within a growing regional programme, offering long-term career progression, leadership responsibility, and the chance to shape engineering standards across major UK water frameworks. We are an equal opportunity employer and value diversity in our company. We do not discriminate on the basis of race, religion, colour, national origin, gender, sexual orientation, age, marital status, veteran status, or disability status

Job role: Generator Engineer £60,000 - Overtime + Company Van + Paid Travel Excellent Holiday Allowance + Rewarding Bonus Scheme Leading Pension Contributions Shift: Monday - Friday - DAYS We’re looking for a Generator Engineer to join clients leading engineering team, working across the North West of the UK to service, maintain, and repair generators. Working on energy projects between 1-20MW covering generator sets and combined heat and power projects. This is a fantastic opportunity for an experienced engineer to develop their skill set further. The main responsibilities of the Generator Engineer will include - • Carrying out planned maintenance and emergency breakdown support on generators and combined, heat and power units., • Diagnosing and repairing faults on mechanical, electrical, and control systems, • Supporting installation, commissioning, and optimisation of new systems, • Delivering a high standard of customer service while working on client sites, • Working both independently and as part of a wider technical support team If you are interested in this Generator Engineer role, please submit an up-to-date CV through this advert

1st Step Solutions are supporting a building services engineering company who have an opportunity for a MEP Design Manager based in Grays, Essex. (with site visits as required) Our client delivers Mechanical, Electrical & Plumbing solutions across commercial, industrial and residential sectors. Job Overview Responsible for leading, coordinating, and managing all design activities for Mechanical, Electrical and Public Health systems across multiple projects. The role ensures that the MEP design is technically robust, fully coordinated, delivered on time, and aligned with project, regulatory and client requirements. Key Responsibilities * Manage all Mechanical, Electrical and Public Health design activities from concept through to completion. * Oversee the production, review and approval of MEP drawings, calculations, reports and technical deliverables. * Develop and manage the design programme to ensure timely release of information. * Ensure designs meet project brief, client standards, and statutory/regulatory requirements. * Ensure MEP designs integrate with architectural, structural and specialist contractor requirements. * Review designs for accuracy, buildability, safety and cost effectiveness. * Maintain the design risk register and manage design change control. * Ensure compliance with relevant British Standards, Building Regulations, CIBSE and industry guidance. * Provide ongoing technical support to site teams throughout installation and commissioning. * Manage technical queries (RFIs) and ensure quick, accurate design responses. * Ensure design information aligns with construction sequencing and site requirements. * Oversee the preparation, issue and revision control of MEP design documentation. * Coordinate the production of O&M manuals, handover documentation and as-built information. Skills & Experience Required * Proven experience as an MEP Design Manager, Senior MEP Engineer, or similar leadership design role. * Strong technical background in both Mechanical and Electrical building services engineering. * Ability to review and understand schematics, drawings, specifications and technical reports. * Solid understanding of RIBA design stages, construction processes and design coordination. * Experience working for an MEP contractor or building services consultancy. * Excellent communication, leadership, organisation and problem-solving skills. Desirable * Experience in BIM/3D coordination tools (Revit, Navisworks). * Familiarity with design & build contracts and contractor-led engineering. * Understanding of commercial implications of design changes and value engineering. Qualifications * Degree, HNC or HND in Mechanical, Electrical or Building Services Engineering * Working toward or holding Chartered status (CIBSE, IMechE, IET) is advantageous. * CSCS Manager/Supervisor card (or willingness to obtain) Full package available

Building Services Engineer Location: Billericay Salary: Competitive Job Type: Full Time | Permanent A well-established and growing multi-disciplinary consultancy is seeking an Intermediate Building Services Engineer to join its Building Services team based in Billericay. This role will involve providing mechanical engineering support across a range of building services projects, with a strong focus on the healthcare and education sectors. The successful candidate will contribute to both design and project delivery, supporting the development of practical and efficient engineering solutions within the built environment. This position offers the opportunity to work as part of a collaborative team delivering technically challenging and rewarding projects. Due to the nature of some projects, security clearance may be required. The Role The successful candidate will: • Deliver projects to a high technical standard, within agreed timescales and budgets • Undertake design work and provide technical input into building services engineering solutions • Assist in developing practical and cost-effective engineering designs • Meet with clients to establish project briefs and budgets • Prepare detailed specifications and drawings in response to client requirements • Review tenders and prepare tender reports with recommendations • Project manage site works from commencement through to completion • Monitor site progress against design specifications and support agreement of contractor final accounts • Carry out inspections of existing installations and prepare condition reports • Prepare technical reports, design presentations, tender drawings and specifications • Develop energy strategies and support sustainable and low carbon design approaches • Use thermal modelling software and CAD tools including AutoCAD and Revit • Select appropriate mechanical plant and equipment and develop plantroom configurations • Carry out analysis and coordination of pipework and ductwork systems with other disciplines • Undertake site visits, surveys and witness system commissioning • Assist with monthly fee invoicing and financial project management tasks • Work towards achieving team fee targets and project delivery objectives Requirements • Degree or Master’s in Engineering or Building Services Engineering • Membership of the Chartered Institution of Building Services Engineers, The Energy Institute or similar professional body desirable • Chartered Engineer status or working towards chartership • Experience delivering building services engineering projects • Proficiency in mechanical design software such as IES • Experience using AutoCAD and Revit preferred • Good knowledge of relevant legislation, CIBSE guides, building regulations and industry standards • Strong organisational and communication skills • Full UK driving licence and access to a vehicle Apply by sending your CV in confidence to Emma at Anglian Recruitment

AV Programmer Crestron Home & Lutron Smart Home / Residential Location: London & Surrounding Areas Salary: £45,000 - £50,000 per annum (DOE) Type: Full-time, Permanent The Role We are seeking an experienced Crestron Home and Lutron Smart Home / Residential AV Programmer to join a growing smart home and residential AV specialist. This role will involve programming, commissioning, fault-finding, and supporting high-end residential projects across London and the surrounding areas. You will be working on premium smart home installations, delivering seamless user experiences across lighting, AV, control systems, and integrated technologies. Key Responsibilities Programming and commissioning Crestron Home systems Programming, commissioning, and integration of Lutron lighting control systems (RA2, RA3, HomeWorks) Supporting residential AV systems including audio distribution, video distribution, and home cinema System testing, optimisation, and handover to clients Fault-finding and diagnostics of control and AV systems Working closely with installers, project managers, and clients Providing post-installation support and system updates when required Required Skills & Experience Proven experience programming Crestron Home Strong experience with Lutron smart lighting systems Background in Residential AV / Smart Home integration Good understanding of IP networking within AV environments Ability to fault-find and resolve system issues efficiently Professional, client-facing approach Full UK driving licence Desirable (but not essential) Experience with Control4, Savant, or similar platforms Experience commissioning high-end residential projects Knowledge of CCTV, access control, or HVAC integration What's on Offer Competitive salary of £45,000 - £50,000 per annum Work on high-end residential smart home projects Long-term career progression with a growing business Supportive team environment with technical autonomy Company vehicle or allowance (if applicable) Ongoing training and development INDAV Please send an up-to-date CV to (url removed) or you can call on (phone number removed) for a discussion

Job Title: Senior Maintenance Engineer Salary - £65,000 Basic Monday - Friday - Day Shift - 7AM - 4PM Package - Performance Bonus We are seeking an experienced Senior Maintenance Engineer to lead and optimise engineering maintenance across the facility, Reporting to the Operations Manager, you will be responsible for ensuring all mechanical systems are safe, efficient, and compliant production, while maximising plant availability and performance. This is a critical leadership role requiring strong technical knowledge, operational excellence, and a proactive approach to safety and continuous improvement. Key Responsibilities • Lead day-to-day maintenance operations to ensure safe, reliable, and efficient production, • Manage and develop maintenance teams, including shift leaders and operators, • Ensure full compliance with UK health, safety, and environmental regulations, • Optimise production performance, efficiency, and availability in line with output targets, • Coordinate with maintenance, engineering, and planning teams to minimise downtime, • Monitor engineering KPIs, investigate incidents, and implement corrective actions, • Contribute to outage maintenance planning, commissioning activities, and performance testing Essential Requirements: • Qualified NVQ or Degree level engineer, • Proven experience in a electrical engineering position within a manufacturing or industrial processing facility, • NEBOSH / IOSH / Authorised Person qualifications How to Apply: To apply for the Senior Maintenance Engineer position, please submit your CV via this advert

Job role: EC&I Engineer Up To £70,000 + Overtime + Bonus + Paid Travel DAY SHIFTS Company Vehicle Further Training and Upskilled courses We are seeking a skilled Electrical, Control & Instrumentation Engineer to join clients growing engineering team. You will play a key role in the design, development, installation, and maintenance of EC&I systems across projects. Key Responsibilities: • Design, specify, and review EC&I systems for power generation projects., • Support project delivery from feasibility through to commissioning and operation., • Develop and review control system architectures, instrumentation specifications, and protection schemes., • Ensure compliance with relevant UK and international standards (BS EN, IEC, IET Wiring Regulations, etc.)., • Collaborate with multidisciplinary teams, contractors, and clients to ensure successful project outcomes., • Provide technical support during installation, testing, and commissioning., • Contribute to continuous improvement, safety, and sustainability initiatives. About You • Qualified in Electrical Engineering, Control & Instrumentation, Mechatronics or similar, • Experienced within Power Generation, Heavy Industrial, Recycling, Energy from Waste, Manufacturing, FMCG industries, • Strong understanding of PLCs, instrumentation and control systems, • Skilled in electrical fault finding, diagnostics and preventative maintenance If you are interested in this EC&I Engineer role, please submit an up-to-date CV through this advert

Job role: Mobile HGV Technician Up To £50,000 Basic - Overtime + Company Van + Paid Travel Yearly Earnings Circa £60,000 Bonus Schemes - Upskilling Training Shift: Monday - Friday - DAYS We’re looking for a Mobile HGV Technician to join clients leading engineering team, working across the south of the UK to service, maintain, and repair diesel engines within recycling & renewable energy sites. The main responsibilities of the Mobile HGV Technician will include - • Service, Maintenance and Rebuilds of diesel engines, • Service, Maintenance and Repair of Mobile Plant Machinery - Material Handlers, Loading Shovels, Forklifts, Cranes, Skid Steers, • Service, Maintenance and Repair of power generation machinery - CHP units, Generators, Biogas systems., • Service, Maintenance and Repair of Conveyor Systems, Shredders, Balers Compactors., • Carrying out breakdown support on CHP units and generators, • Diagnosing and repairing faults on mechanical, electrical, and control systems, • Supporting installation, commissioning, and optimisation of new systems, • Delivering a high standard of customer service while working on client sites, • Working both independently and as part of a wider technical support team If you are interested in this Mobile HGV Technician role, please submit an up-to-date CV through this advert