Trabajos commissioning en DerbyCrear alertas

M&E Manager\n\nDerby - M&E Manager \n\nc£50k - £62k neg dep exp + car allowance + benefits \n\nOur highly successful niche sector client based in Derby offers a range of highest quality technical solutions that encompass high-integrity control and monitoring systems to blue chip clients worldwide, and as a result of continued success and an ongoing planned programme of strategic growth, they are now seeking to recruit an experienced and professional M&E Manager to oversee the supply chain operation and support the planning, procurement and delivery of M&E works across a range of projects and bids. \n\nTo be considered for this varied and challenging M&E Manager role, you will be a well organised team player who demonstrates exceptional attention to detail and commercial awareness and a high level of electrical infrastructure and electrical principles knowledge, holding a relevant qualification (HND or above) in electrical engineering or equivalent, whilst also having the appropriate skills and experience to undertake the following (including but not limited to) duties: \n\nTender Stages:\n\nCo-ordinating and attending site surveys at both tender and project delivery stages.\nEvaluating M&E supplier proposals for scope completeness, risk, programme and commercial alignment\nSupporting the bid team with pricing strategy, risk allowances, qualifications and clarifications for M&E scope.Project Delivery for M&E Works:\n\nProducing technical and delivery requirements for supplier quotations and conducting evaluations and supporting site surveys as required to inform delivery strategy.\nAttending design meetings (along with design sub-contractor as required).\nProviding technical and delivery support to the Site Supervisor in site progress meetings and assisting the Project Managers in the planning, execution and completion of the M&E sub-contract works, and managing supplier progress and performance, ensuring alignment with project plans.\nManaging and reviewing the production of supplier designs\nManaging M&E FAT's and reviewing all relevant documentation.\nManaging the co-ordination of designers and installers (which may be different sub-contractors)\nReviewing site test documentation and RAMS for suitability, completeness and alignment.\nManaging site supervisors for M&E works and all aspects of installation handover, as well as all associated members of the team including Commissioning Engineers, Electrical Design Engineers and CAD Engineers. It is envisaged that the successful M&E Manager candidate will be qualified to at least HND Electrical Engineering or above and demonstrate at least 4 years previous experience in a similar role with a high level of familiarity of electrical infrastructure and electrical principles normally associated with projects in transportation, power or comparable sizable projects from other sectors and extensive experience of supporting bids or preconstruction activities. With a good level of IT proficiency (Excel and Word mandatory) and be legally permitted to work in the Republic of Ireland without restriction, you will be comfortable working under pressure and to tight deadlines with excellent attention to detail and the flexibility and adaptability to manage a range of different tasks and to work extra hours as required. \n\nContact the Electrical Team at Premier Technical Recruitment on (phone number removed) or email your cv in confidence to for further details

Apprentice Technical Support Engineer One Big Circle – Derby Full-Time (fixed-term for length of apprenticeship) 37.5 hours over five days £9 per hour About One Big Circle Formed in 2017, One Big Circle is a fast-growing technology company that provides “Intelligent Video” solutions. We focus entirely on solving real-world industry problems by fusing new technology in the field of Video, IOT, Cloud and AI providing end to end solutions which allow our customers to dramatically improve their operational efficiency and safety. Our culture is one of high-quality technical delivery and we work at a speed that many industries are unaccustomed to; we have done this by building a team dynamic that challenges and empowers our people and creating an environment where everyone contributes and learns. We are growing, profitable and have ambitious plans to continue expansion in and beyond our existing markets. We are looking for a proactive and motivated individual to join our team to support the business in further growing our flagship award-winning product: AIVR. AIVR (Automated Intelligent Video Review) is a state-of-the-art video technology system used by thousands of people in the rail industry. AIVR has won dozens of awards and is recognised as the market leading solution, but we are building many more opportunities both in existing and new markets which will further accelerate our growth. As an employer, we believe in a happy, inclusive & supportive workplace where everyone can work to their best ability. We are growing quickly and need to recruit another valued member of the team. Could that be you? Role Summary We are seeking an ambitious and pro-active apprentice with a passion for electro-mechanical engineering to join and strengthen our Site and Systems Teams. This role offers the opportunity to complete a Level 6 Degree Apprenticeship in Electro-Mechanical Engineering while contributing directly to the installation, maintenance, and development of our systems. Over the course of the programme, you will be expected to take ownership of both your practical and academic development, working towards successful completion of a BEng (Hons) qualification and Degree Apprenticeship Certificate, evidenced through a final end-point assessment and portfolio of work. The five year standard will combine block-release study at the University of Nottingham with structured self-directed study. Alongside this, you will play an active role in delivering high-tech projects, primarily involving the installation and integration of systems on trains at depots across the UK, as well as supporting system build, development, and testing activities at our Derby production facility. The role involves regular travel to customer sites nationwide and requires the ability to balance operational responsibilities with the demands of degree-level study. A proactive approach to learning, strong problem-solving capability, and the discipline to manage independent study are essential. You will gain hands-on experience working with a range of advanced technologies, including machine vision systems, precision lighting, laser measurement, thermal sensing, embedded Linux platforms, IP networking, and GPS/4G/5G connectivity. This exposure will enable you to develop a strong foundation in system integration, fault-finding, and engineering in real-world environments. This is a dynamic and demanding role, offering the opportunity to apply academic learning directly to practical engineering challenges. You will also gain broader business exposure through collaboration with teams such as Business Development. The programme requires strong analytical and mathematical ability, alongside a high level of commitment and self-motivation. You will be supported by experienced engineers, with the Lead Site Engineer ensuring a varied workload that reinforces and complements your academic learning. This is an exceptional opportunity for the right candidate to build a long-term career in electro-mechanical engineering. Responsibilities This is a hands-on role with varied responsibilities, working hours, and locations depending on the specific project requirements. While based from our Derby office, the role is primarily site-based, there will be a need to travel to our head office in Bristol several times per year. Travel and accommodation for these visits will be arranged and costs covered by the company. Other responsibilities of the role will include the following: • Support in the installation and commissioning of cutting-edge monitoring systems, • Assist the Lead Site Engineer with planning work, including risk assessments and method statements, • Perform on-site tasks safely and professionally, • Collaborate effectively with team members to diagnose issues and develop practical solutions, • Create and maintain technical documentation during system build and testing phases, • Contribute to system assembly, configuration, and testing at our Derby production facility, • Develop the ability to interpret technical drawings, schematics, and blueprints, • Track project progress and produce detailed site reports, ensuring thorough documentation, • Assist in procurement by specifying technical requirements for components and related equipment, • Engage with customers on- and off-site, supporting professional and collaborative working relationships during installation and commissioning activities Personal Qualities and Experience • Highly motivated with a clear commitment to completing a five year Level 6 Degree Apprenticeship, • Demonstrates initiative and a proactive approach to learning and problem-solving, • Strong mathematical and analytical skills, with the ability to apply these in practical engineering contexts, • Good communication and organisational skills, with the ability to manage competing demands between work and study, • Effective when working under pressure, with a resilient and delivery-focused mindset, • Flexible and adaptable approach, combined with meticulous and systematic attention to detail when required, • Strong written communication skills, particularly for technical documentation, • Willingness to take ownership of personal development and continuously improve technical capability, • 18+ with a UK Manual Driving Licence and willingness to travel to various UK site locations, including staying away from home as required (highly desirable) Entry Requirements • A relevant Engineering BTEC, a prior engineering apprenticeship, or equivalent demonstrable experience in a relevant field (considered on a case-by-case basis), • OR A-Level Mathematics at Grade B (or equivalent) plus two additional A-Levels at Grade B or above (or equivalent), • GCSE English Language at Grade 4 (Level 2) or above (or equivalent), • GCSE Mathematics at Grade 5 or above (or equivalent) https://www.nottingham.ac.uk/engineering/campaigns/apprenticeships/electro-mechanical-engineer-degree-apprenticeship.aspx Company Benefits Include: • Auto enrolment Pension Scheme, • Life Assurance, • Private Healthcare Cover, • Work related training courses as required, • Office-Centric role, • Secure bike storage and shower facilities, • Social events You would be a valued part of a fast growing team where your ideas and opinions are valued as we continue the exciting journey of One Big Circle. To apply please send a covering letter along with CV to jobs@onebigcircle.co.uk _

Project Engineer Derby £50,000 – £55,000 + Excellent Benefits! Top Benefits: • Up to 10% employer pension contribution, • Private medical insurance + occupational health support, • Bonus scheme & life assurance (4x salary), • Generous holiday allowance that increases with service (plus bank holidays), • Electric vehicle & cycle-to-work salary sacrifice schemes The Company Join a globally recognised manufacturing organisation at the forefront of advanced materials innovation. Supplying into industries such as automotive, construction, and consumer goods, the business is known for its commitment to sustainability, engineering excellence, and continuous improvement. The Derby site is a key hub for capital investment and operational development. The Role An exciting opportunity has arisen for an experienced Project Engineer to take ownership of capital projects across mechanical systems, site utilities, and infrastructure. Reporting to the CAPEX Leader, you will manage projects end-to-end — from concept and design through to installation and commissioning. Key Responsibilities • Support long-term CAPEX planning, including project selection and prioritisation, • Develop engineering solutions in collaboration with key stakeholders, • Produce cost estimates (±30% early stage, ±10% detailed), • Lead Management of Change (MOC) processes, • Manage contractor selection and vendor engagement, • Oversee full project lifecycle: design, construction, commissioning, • Ensure high standards of safety, quality, and delivery performance, • Maintain full technical documentation (P&IDs, SOPs, SLDs, etc.), • Track budgets, control costs, and report on financial performance About You • 5+ years’ experience in a Project Engineering role (industrial/manufacturing environment), • Strong knowledge of steam systems and process pipework, • Mechanical qualification (HNC/HND/City & Guilds or equivalent), • Experience with ATEX environments (desirable), • IOSH or NEBOSH qualified (or working towards), • Proven contractor and stakeholder management experience, • CAD and SAP experience preferred, • Strong IT skills (Microsoft Office) Additional Benefits • Enhanced maternity, paternity & neonatal pay, • Paid emergency dependants, carers, and bereavement leave, • Employee Assistance Programme (mental health, legal & financial support), • Career development, training, and tuition support, • Inclusive workplace with active employee networks, • Health surveillance, company sick pay & annual flu vaccinations Requirements • Able to commute to Derby (DE21), • Right to work in the UK (no sponsorship available)

Express Recruitment are excited to be working in partnership with a well-established SME, specialising in high-tech innovation services on behalf of a blue-chip client base across diverse industry sectors, from Aerospace to Automotive. Due to continued organic growth and a healthy project pipeline, our client is seeking the addition of a multi-skilled and highly versatile Mechatronics Engineer to join their talented team. This is an opportunity for an individual with a passion for mechanical, electrical and software engineering to leverage their technical capabilities and gain the opportunity to take ownership of their own niche R&D projects. In return, our client is offering a competitive starting salary from £30,000 to £45,000, depending on experience. Other benefits include annual bonus opportunity (based on company performance), 25 days holiday plus bank holidays and Christmas shut down, private medical cover, formal on-site training and more. Skills & Experience • Degree/Masters in relatable engineering field, such as Mechatronics, Computer Science, Mechanical Engineering or Controls & Instrumentation, • Proven experience in LabVIEW coding, including user interface design, modular programming, and real-time control applications, • Experience working with Python, C++, Rust and JavaScript desirable but not essential, • Confident collaborating with multidisciplinary engineering teams (mechanical, electrical, electronic, software) to deliver robust and integrated test solutions, • First class communication skills, with the capability of heading up own projects and managing correspondence directly with customers to articulate key findings and results, • Excellent problem-solving and analytical skills with a strong attention to detail, • Familiarity with test automation frameworks and software (TestStand), version control systems, and software development best practices, • Strong appreciation of mechanical engineering, assembly and testing procedures, • Exposure to PLC programming using Allen Bradley and/or Siemens advantageous but not essential, • Strong debugging skills with the ability to investigate and resolve technical issues quickly and effectively Roles & Responsibilities • Undertake turnkey projects from initial costing through to commissioning, • Perform software coding using LabView and Python for instrumentation, control systems and user interface design, • Design and construct system architecture platforms using a variety of software tools, • Carry out system testing and debugging tasks with a broad range of bespoke test equipment, • Record and document accurate findings following completion of testing procedures and produce customer reports for handover, • Develop and program software across a range of hardware test equipment using embedded coding tools such as C/C++, • Support continuous improvement by refining existing software tools and implementing best practices in test automation and system control, • Document software designs, workflows, and procedures to support internal teams and future projects About Express Recruitment Express Recruitment has been offering exceptional recruitment solutions across the East Midlands since 1987, “exceeding expectations every time” of over 267,000 candidates. We supply a diverse range of sectors including Engineering, Technology, Professional Services, Languages, Sales & Marketing, Call Centres, Commercial, Manufacturing, Local Authority, NHS, Education and Voluntary organisations. Find all of our current vacancies on https://bit.ly/3IaEnI7 Not quite found the right role for you yet? Let us do the scrolling for you! Your search for a new role has never been so easy, just fill in our contact form on https://bit.ly/3NHa9NR or give us a call on 0115 924 0010 and we will do the rest for you. Job Location Derby, Derbyshire Salary c£30,000 - £45,000 Per Annum D.O.E Job Type and Hours Monday-Friday, 40 Hours, Perm How to Apply Interested candidates can send their resumes to jobs@express-recruitment.co.uk mentioning the Job Title in the subject line. Unfortunately, we are unable to contact all candidates due to the large volume of applications we receive. If you have not heard from a consultant within the next three days, please assume that you have not been successful on this occasion. Please do not hesitate to apply for other suitable roles in the future. This vacancy is being advertised on behalf of Express Recruitment Ltd. The services advertised by Express Recruitment Ltd. are those of an Employment Agency.

6-Month Fixed-Term Contract Remote £75,000 pro rata We are partnering with a leading network infrastructure provider undergoing a significant fibre network expansion programme and are seeking an experienced Network Monitoring Engineer to support the successful delivery of this initiative. This is a hands-on engineering role where you'll be responsible for designing, implementing, and commissioning monitoring and observability solutions across newly deployed fibre infrastructure and network equipment. Working closely with Network Operations and Core Network teams, you'll ensure full visibility of critical services from day one through modern monitoring technologies, streaming telemetry, and AI-driven analytics. Key Responsibilities Monitoring & Observability • Design and implement end-to-end monitoring solutions across new fibre infrastructure deployments., • Build and maintain streaming telemetry pipelines to provide real-time network visibility., • Configure, optimise, and manage VictoriaMetrics environments, including ingestion, retention, and performance tuning., • Deploy and support Nagios-based monitoring solutions, alerting workflows, and service health checks., • Implement AI-driven analytics and anomaly detection capabilities to improve fault identification and operational efficiency., • Develop and maintain Grafana dashboards and visualisation platforms to provide actionable operational insights. Network Infrastructure & Engineering • Commission monitoring solutions across fibre nodes, OLTs, and Layer 1-3 network devices., • Work collaboratively with Core Network teams to ensure monitoring aligns with evolving network architecture., • Establish baseline performance metrics and SLA-driven alerting thresholds., • Continuously improve monitoring platforms, tooling, and operational processes. Documentation & Knowledge Transfer • Produce high-quality technical documentation and operational procedures., • Create runbooks, escalation processes, and support documentation., • Facilitate knowledge transfer to Network Operations and Engineering teams., • Provide regular project updates and contribute to project reviews and planning activities. Required Experience & Skills • Proven experience in a senior Network Monitoring or Network Engineering position within an ISP, managed services, telecommunications, or large-scale infrastructure environment., • Strong hands-on experience with VictoriaMetrics in production environments., • Solid experience configuring and administering Nagios monitoring platforms., • Practical experience with streaming telemetry technologies including gNMI, gRPC, Telegraf, and gNMIc., • Exposure to AI/ML-driven monitoring, analytics, or anomaly detection solutions., • Strong understanding of networking fundamentals including TCP/IP, BGP, OSPF, VLANs, and optical networking technologies., • Ability to work autonomously and deliver against project deadlines and milestones., • Excellent documentation, communication, and stakeholder management skills., • Strong attention to detail with a focus on reliability, resilience, and operational excellence. Desirable Skills • Experience supporting FTTH or dark fibre network deployments., • Scripting and automation experience, ideally using Python., • Familiarity with Grafana, Prometheus, or similar observability platforms., • Knowledge of SNMP, NetFlow/IPFIX, and syslog-based monitoring environments. What's on Offer • Opportunity to play a key role in a major network infrastructure programme., • Exposure to modern observability, telemetry, and AI-driven monitoring technologies., • Collaborative engineering environment with significant project ownership., • Competitive contract package and immediate project impact. Modis International Ltd acts as an employment agency for permanent recruitment and an employment business for the supply of temporary workers in the UK. Modis Europe Ltd provide a variety of international solutions that connect clients to the best talent in the world. For all positions based in Switzerland, Modis Europe Ltd works with its licensed Swiss partner Accurity GmbH to ensure that candidate applications are handled in accordance with Swiss law. Both Modis International Ltd and Modis Europe Ltd are Equal Opportunities Employers. By applying for this role your details will be submitted to Modis International Ltd and/ or Modis Europe Ltd. Our Candidate Privacy Information Statement which explains how we will use your information is available on the Modis website.

Are you a skilled automation professional looking to take ownership of complex engineering projects? We are partnering with a leading specialist machinery manufacturer to find a Control Systems Engineer. In this dynamic role, you will be fully involved in all aspects of controls engineering, from initial software design through to final commissioning. Working with cutting-edge automated machinery, the successful Control Systems Engineer will deliver robust PLC and HMI programming solutions for bespoke packaging machinery and special-purpose automation equipment. Key Responsibilities • Control Systems Design: Lead the design, development, and implementation of new, advanced industrial control systems and associated equipment., • PLC & HMI Programming: Develop, code, and optimize PLC and HMI software, focusing primarily on Allen-Bradley (Rockwell) platforms., • Legacy Equipment Support: Utilise Mitsubishi PLC platform knowledge to support, upgrade, and maintain existing legacy control systems and machines., • Documentation & Specifications: Convert project requirements into technical documentation, including Functional Design Specifications (FDS), Detailed Design Specifications, and software manuals., • Testing & Commissioning: Execute factory acceptance testing (FAT), site acceptance testing (SAT), and hands-on, on-site machine commissioning., • Collaborative Support: Partner with production, support sales teams with technical expertise to identify customer needs, and build strong client relationships. What We Are Looking For • Education: An HNC, HND, or higher qualification in a relevant engineering discipline., • Essential PLC Experience: A minimum of 3 years of professional experience writing code for Allen-Bradley (Rockwell) PLCs, though candidates with more experience are highly encouraged to apply., • Desirable PLC Experience: Previous experience writing code for Mitsubishi PLCs is highly desirable to assist with older machinery lines., • Industry Background: Proven experience working within the packaging machinery or automation sectors is ideal. Experience with motion control and servo systems is also advantageous., • Project Delivery: The ability to execute multiple project responsibilities simultaneously while working to tight deadlines., • Flexibility: A self-starter with a positive attitude who is prepared to travel nationally and internationally for commissioning when required. Benefits & Culture This company takes pride in fostering an open, productive team culture where technical expertise and personal responsibility are highly valued. Alongside a competitive salary, they offer an excellent work-life balance package: • 5 days annual leave plus bank holidays., • A manageable 38-hour working week based on-site., • Flexible start and finish times to suit your routine., • A 1-in-3 Friday rota that accommodates a shorter 9:30am to 3:30pm shift, giving you an early start to your weekend. Ripple Recruitment is acting as an employment agency for this vacancy. My client is an equal opportunity employer committed to fostering a diverse and inclusive workplace. Due to high volumes of interest, we can only respond to shortlisted applicants.

Your new companyYou will be joining a well-established engineering and estates team based at a large, busy hospital site in Derby. The team plays a vital role in maintaining critical facilities across the estate, ensuring a safe, compliant, and fully operational environment for patients, staff, and visitors.Working within a healthcare setting offers a unique and rewarding opportunity, where your contribution directly supports the delivery of essential services. Your new roleAs a Mechanical Engineer / Commercial Plumber, you will provide a comprehensive, efficient, and high-quality mechanical maintenance service, with a strong focus on plumbing systems across a single site. Contract: Temporary Hours: 8-5/ 40 hours a week, Monday to Friday Pay: £24- £26 p/hr. Please note we only pay PAYE or Umbrella. We do not pay CIS. You will be responsible for carrying out both planned preventative maintenance (PPM) and reactive repairs to a wide range of mechanical services, including: • Domestic hot and cold water systems, • Drainage systems and sanitary ware, • Associated plant and mechanical equipment You will diagnose faults, carry out timely repairs, and assist in the installation and commissioning of new systems or modifications to existing infrastructure.In this role, you will: • Work from job tickets, drawings, and instructions to deliver work safely and efficiently, • Liaise with hospital staff, contractors, and engineering colleagues, • Support emergency response activities and participate in on-call duties where required, • Ensure all work meets Health & Safety regulations, HTMs, and Trust policies What you'll need to succeed • NVQ Level 3 (or equivalent) in Plumbing or Mechanical Engineering, • A time-served apprenticeship in a mechanical discipline, • Proven experience working on plumbing systems in a commercial or healthcare environment, • Strong knowledge of relevant regulations and safety standards Desirable (but not essential): • Knowledge of HTMs and healthcare compliance requirements, • Legionella awareness/training, • Experience within NHS or critical environments, • Confined space or working at height training You will also be a reliable and adaptable individual with strong problem-solving skills, good communication, and the ability to work both independently and as part of a team. What you'll get in return • Competitive hourly rate of £24 - £26 per hour, • Exposure to complex and critical mechanical systems, • A supportive and professional team environment, • The chance to further develop your skills in a highly regulated setting What you need to do nowIf you're interested in this role, click 'apply now' to forward an up-to-date copy of your CV, or call us now.If this job isn't quite right for you, but you are looking for a new position, please contact us for a confidential discussion about your career. Hays Specialist Recruitment Limited acts as an employment agency for permanent recruitment and employment business for the supply of temporary workers. By applying for this job you accept the T&C's, Privacy Policy and Disclaimers which can be found at hays.co.uk

Are you an innovative mechanical design professional with a passion for bringing complex machinery from concept to reality? We are partnering with a leading manufacturer to find a skilled Mechanical Design Engineer who deliver specialist engineering expertise for automated systems, bespoke machinery, and advanced packaging machinery. In this role, you will play a pivotal part in the entire project lifecycle, utilising SolidWorks to provide high-quality, cost-effective mechanical design solutions from initial concept to final commissioning. Key Responsibilities • SolidWorks CAD Modelling: Design detailed components, mechanisms, and complex assemblies in SolidWorks, ensuring precise tolerancing and manufacturing notes., • Full Lifecycle Mechanical Design: Take accountability for mechanical design projects, from creating design specifications down to final machine commissioning., • Specification & Documentation: Assist with writing User Requirement Specifications, manage Bill of Materials (BOMs), and produce essential technical file documentation., • Prototyping & Testing: Research uncertain processes and validate your mechanical design concepts by building and testing prototypes., • Project Coordination: Oversee the procurement of specialist components, assist in managing sub-contract manufacturing, and coordinate machine commissioning., • Compliance & Standards: Ensure all mechanical design work complies with relevant industry regulations, including EC Directives and health and safety requirements. What We Are Looking For, • Education: A degree-level qualification in mechanical engineering, product design, or a closely related discipline., • Software Expertise: Strong, competent knowledge and professional workplace experience utilising the SolidWorks CAD package., • Industry Experience: Proven experience in the mechanical design of packaging machinery, automation equipment, jigs, or fixtures., • Sector Knowledge: Experience working with medical devices or medical packaging is a distinct advantage., • Technical Insights: A practical understanding of engineering principles, manufacturing methods, and workshop machinery., • Core Skills: Exceptional problem-solving abilities, a strong eye for detail, and the organisational skills needed to meet tight project deadlines.Salary & Benefits, • Starting Salary: up to £45,000, dependant upon experience, • Location: 5 days on site in Derby, • Holiday: 25 days per year + bank holidays, • Hours: 38 hour working week with flexible start times and early finish on Friday, • Pension: 5% employee, 4% employer contribution, • Death in Service: 2 x SalaryWhy Apply? This is an excellent opportunity to progress your mechanical design career in an open, productive culture where engineering excellence is celebrated. Working with SolidWorks daily, you will have the autonomy to develop innovative solutions while contributing to continuous improvement and lean manufacturing initiatives. Ripple Recruitment is acting as an employment agency for this vacancy. My client is an equal opportunity employer committed to fostering a diverse and inclusive workplace. Due to high volumes of interest, we can only respond to shortlisted applicants.

Working here isn’t just a job. You can advance your career at Avove, and we’ll reward you with a range of benefits that recognise great work. We provide full training and continuous development to help you reach your potential. We strive to create an inclusive working environment where everyone can be themselves. Join us and take the next step towards a fulfilling career. We understand the impact our work has on our society and the environment. It’s the difference we make that improves people’s lives and helps the economy to grow. We work alongside our customers to deliver resilient, bespoke infrastructure solutions that keep the taps running, the energy flowing and people connected. The work we do together matters. About the role Due to continued growth, we are seeking an experienced Project Manager to lead the successful delivery of large-scale, complex clean water pipeline projects.This role requires ownership of projects from feasibility and design through to construction and commissioning. You will bring a strong foundation in project management (PMQ principles or equivalent) alongside proven construction leadership experience within utility or water infrastructure environments.This is a hands-on leadership role requiring technical expertise, commercial acumen, and the ability to manage multifaceted stakeholder and environmental constraints across challenging pipeline corridors. Responsibilities • Lead the safe, compliant and efficient delivery of large-diameter clean water pipeline schemes, • Apply project management fundamentals (PMQ or equivalent) to govern project lifecycle, including scope, schedule, cost, risk, and quality control, • Manage project performance under NEC contracts, including cost forecasting, compensation events, and risk mitigation, • Coordinate multidisciplinary design and construction teams, ensuring alignment across engineering, commercial, environmental and delivery functions, • Oversee delivery of linear infrastructure across rural and semi-rural corridors, addressing logistical and environmental constraints, • Manage trenchless crossings, tie-ins and complex interfaces with existing infrastructure and third partiesLead stakeholder engagement, including landowners, regulators, local authorities, and utility providers, • Drive programme certainty, productivity, and quality outcomes, ensuring projects are delivered on time and within budget, • Champion health, safety, and environmental compliance, embedding best practice across all stages About you • Proven experience delivering large, complex clean water pipeline projects (large diameter / long-distance schemes), • Strong background in construction and project management, with knowledge of PMQ fundamentals or equivalent methodologies, • Demonstrable experience managing NEC contracts and commercial performance, • Experience delivering linear works across challenging environments (rural, environmentally sensitive, or constrained corridors), • Expertise in trenchless technologies and complex pipeline interfaces, • Ability to lead multidisciplinary site teams and coordinate multiple stakeholders, • Strong understanding of programme controls, risk management, and cost management, • Experience with land access, stakeholder negotiation, and environmental compliance, • Ability to make informed decisions under technical, programme, and environmental constraints, • Background within clean water / utilities infrastructure sector is essential What’s in it for you… We offer a rewarding salary that is tailored to your skills and experience. But that’s not all! We celebrate hard work and give recognition to our colleagues. In addition to this, we understand that one size doesn’t fit all so everyone has access to a variety of flexible benefits that work for you. • 24 days holiday plus bank holidays, • Company pension scheme, • Life assurance, • Family friendly policies, • A selection of lifestyle benefit options, • Financial wellbeing programme, • Employee assistance program for health and wellbeing and onsite mental health first aiders to support our colleagues., • 1 day paid Volunteerin your community and, • Charity matched funding., • Rewards initiative for achieving recognised professional qualifications. About us… We design, build and maintain the UK’s utilities infrastructure to help transform local communities for the better. We provide cutting-edge and sustainable engineering solutions and play a critical role in helping to keep the water running, the lights on and people connected. We are an expert, responsible and agile partner, providing vital services to water, power and telecommunications sectors. We work closely with our clients to help protect and improve their assets, enhance customer experience and protect the natural environment. Everything we do is designed to drive continual improvement and move life forward. We are proud to work in partnership with leading utility providers, including Severn Trent, United Utilities, Yorkshire Water, Northern PowerGrid, Northumbrian Water Group, Scottish Power Energy Networks and Scottish Water We are an equal opportunities employer... We welcome applications from candidates of all races, genders, disabilities, religions, ages and sexual orientations. We know that having a diverse workforce encourages new perspectives, inspires creativity and creates an engaging workplace and we are committed to creating an inclusive environment where all colleagues can thrive. When it comes to inclusion, we’re making sure we keep up the progress with our Communities of Practice, who help us do just that. What next... We encourage you to apply for this role as soon as you can. We recognise talent waits for no one, so we progress candidates individually through all stages of recruitment process. If you have any questions, please reach out for an informal discussion.

M&E Manager Derby to £63k neg dep exp + car allowance + benefits Our highly successful niche sector client offers a range of highest quality technical solutions that encompass high-integrity control and monitoring systems to blue chip clients worldwide, and as a result of continued success and an ongoing planned programme of strategic growth, they are now seeking to recruit an experienced and professional M&E Manager to oversee the supply chain operation and support the planning, procurement and delivery of M&E works across a range of projects and bids. To be considered for this varied and challenging M&E Manager role, you will be a well organised team player who demonstrates exceptional attention to detail and commercial awareness and a high level of electrical infrastructure and electrical principles knowledge, holding a relevant qualification (HND or above) in electrical engineering or equivalent, whilst also having the appropriate skills and experience to undertake the following (including but not limited to) duties: Tender Stages: • Co-ordinating and attending site surveys at both tender and project delivery stages., • Evaluating M&E supplier proposals for scope completeness, risk, programme and commercial alignment, • Supporting the bid team with pricing strategy, risk allowances, qualifications and clarifications for M&E scope. Project Delivery for M&E Works: • Producing technical and delivery requirements for supplier quotations and conducting, • evaluations and supporting site surveys as required to inform delivery strategy., • Attending design meetings (along with design sub-contractor as required)., • Providing technical and delivery support to the Site Supervisor in site progress meetings and assisting the Project Managers in the planning, execution and completion of the M&E sub-contract works, and managing supplier progress and performance, ensuring alignment with project plans., • Managing and reviewing the production of supplier designs, • Managing M&E FAT’s and reviewing all relevant documentation., • Managing the co-ordination of designers and installers (which may be different sub-contractors), • Reviewing site test documentation and RAMS for suitability, completeness and alignment., • Managing site supervisors for M&E works and all aspects of installation handover, as well as all associated members of the team including Commissioning Engineers, Electrical Design Engineers and CAD Engineers. It is envisaged that the successful candidate will be qualified to at least HND Electrical Engineering or above and demonstrate at least 4 years previous experience in a similar role with a high level of familiarity of electrical infrastructure and electrical principles normally associated with projects in transportation, power or comparable sizable projects from other sectors and extensive experience of supporting bids or preconstruction activities. With a good level of IT proficiency (Excel and Word mandatory) and be legally permitted to work in the Republic of Ireland without restriction, you will be comfortable working under pressure and to tight deadlines with excellent attention to detail and the flexibility and adaptability to manage a range of different tasks and to work extra hours as required. Contact the Electrical Team at Premier Technical Recruitment on 01827 68400 or email your cv in confidence to electrical@p-t-r.co.uk for further details.

Security Service Engineer\nSecurity, CCTV and Access Control\nDerby DE1 3AF\nMobile Role with Van Provided\nDay Shifts Mon-Fri\n\nWe are recruiting for a field-based Security Systems Engineer to join a growing engineering team.\n \n The role involves servicing, maintaining, and occasionally installing electronic security systems across customer sites. Candidates should be self-motivated, customer-focused, and able to work well both independently and as part of a team while maintaining a professional approach at all times.\nThe ideal candidate will be located local to Derby, Nottingham, Leicester or surrounding areas and happy to travel to customers across the UK.\n\nOther job titles might include: Field Service Security Engineer, CCTV & Access Control Engineer, Electronic Security Engineer, Security & CCTV Technician or similar.\n \n Key Responsibilities - Security & CCTV Engineer\n \nService, maintain, and fault-find on electronic security systems across customer sites across the UK. \nRespond to planned and reactive service calls, ensuring excellent customer communication throughout \nSupport small installation projects, site surveys, testing, and commissioning work \nManage van stock levels and assist with maintenance planning for larger or complex sites \nProvide technical support to customers and internal teams, helping resolve issues quickly and professionally \nTake part in the call-out rota, attend training and team meetings, and be flexible for overtime or weekend work when required \n Key Requirements - Security Service Engineer\n \nHolds strong field service/installation or maintenance experience within the Security Industry \nStrong fault-finding and diagnostic skills OR installation experience across a range of security systems and manufacturers \nIndustry recognised qualifications in security systems (desirable) \nExperience working within residential or social housing environments \nAbility to complete technical documentation accurately \nGood working knowledge of relevant industry standards, regulatory compliance and Health & Safety regulations \nFull UK clean driving licence \n Salary & Package - Security Service Engineer:\n \n£30,000-£45,000 per annum \nStarting salary dependent on level and experience \nCompany Van & Fuel Card \nEnhanced overtime \nOncall Pay Rates 1 week in 3 \nCompany Holiday \nCompany Pension Scheme \nOpportunity to further progress with additional training \n Interested?\n To apply for the Security Service Engineer: position, here are your two options:\n \n"This is the job for me! When can I start?" - Call now and let’s talk through your experience. Ask for Emma Gilmore on (phone number removed) between 7:30am - 4.30pm. \n"I think I'm right for this position, but I'm not sure I have enough to get an interview" - Click "apply now" so I can read your CV and let you know. PPDEL

Job description:\n\nIf you are passionate about making a difference in the lives of children and young people, we would love to hear from you!\n\nShift Patterns: 2 days on 4 days off\n\nSalary: £34,840-£35,360 per annum + Sleep in rate £50 + Overtime £17.75 per hour\n\nSummary:\n\nTo be involved in shaping and delivering the home’s Statement of Purpose and supporting the registered manager and team to achieve the same.\n\nTo provide high quality care services that supports the needs of children and young people,\n\nto be an advocate for their well-being and to provide strong, motivational leadership to the team.\n\nEssential:\n\nPossession / Working towards - Diploma level 5 Leadership & Management\n\nPossession of Diploma level 3/4 – Children and Young People\n\nExcellent communication skills and ability to work as part of a team\n\nExcellent knowledge of the care needs and care plans of specific young people\n\nAbility to take increased levels of professional responsibility\n\nAbility to identify their own and others professional, care and training needs\n\nMain responsibilities:\n\nTo assist the registered manager to ensure the efficient operation of the service in accordance with the relevant legislation, policies and procedures and the Statement of Purpose for the home.\n\nResponsibility for safeguarding and promoting individual rights; providing good quality care, free from oppression, and where differences are respected and valued.\n\nAchieve the highest standards of care for the children and young people which reflects their individual care\n\nTo assist and supervise the continual assessment of the needs of the children and young people, and to identify and prepare specific development plans ensuring the most appropriate service provision.\n\nTo be involved in the recruitment, induction, mentoring, and supervision of new employees.\n\nContribute to a comprehensive team training and development programme, enabling the service to have all the necessary skills and expertise levels available to meet the needs of the young people.\n\nSupport the registered manager to promote teamwork and ensure good organisation retention.\n\nDemonstrate effective leadership and staff co-ordination and be a role model of excellence for staff.\n\nTo contribute to the development of appropriate relationships with, and between adults, young people and other stakeholders.\n\nLiaise with the various internal and external multi-disciplinary teams and commissioning authorities, to ensure that the care needs of new, and existing children and young people are met.\n\nTo chair meetings, reviews and discussions as necessary, as directed by the registered manager.\n\nWhat we offer:\n\n3% Employer Pension contribution\n\nPrivate Healthcare (subject to successful probation period)\n\n100% Training funded by employer (Inc. diplomas Level 3,4 & 5)\n\nFree DBS check\n\nEmployee Assistance Programme for you and immediate family\n\nEyecare Vouchers\n\nCycle to Work Scheme\n\n224 Hours Annual Leaver per annum\n\nCelebrate employee life events such as Birthday, Wedding, New Baby\n\nService Bonus - £100 2 years / £250 5 years/ £500 8 years\n\nCompany Social Events\n\nTeam Activities\n\nReferral Scheme up to £500\n\nElectric Vehicle Scheme\n\nChristmas & New Years Double Pay\n\nOvertime £17.75 per hour\n\n5ab Care are committed to safeguarding and promoting the welfare of children and young people and expect all staff to share this commitment. All appointments are subject to a satisfactory enhanced DBS check and satisfactory references

Company Description\n\nAssystem is an international company with one mission: accelerate the energy transition around the world.\n\nEvery day, our 6,500 switchers located in 12 countries (Europe, Middle East, Pacific Asia & Africa) connect their six thousand billion neurons to tackle the task of the century: switching to low-carbon energy.\n\nWe are a collective committed to the actors who are making the energy switch. Sharing our knowledge, expertise and values allows us to innovate and think differently about the energy transition.\n\nDrawing on more than 55 years' experience in highly regulated sectors subject to strict security and safety requirements, we provide our customers with engineering and project management services, as well as digital services and solutions to optimize the performance of complex infrastructure projects throughout their life cycle. The Group is currently ranked second in the world for nuclear engineering.\n\nTo ensure a viable, efficient, and reliable energy future for all.\n\nJob Description\n\nYour future team:\n\nYou will be joining a dynamic and collaborative commissioning team on-site at our Client In Derby which is a Nuclear Licensed Site.\n\nThis is an exciting opportunity for a contractor looking to contribute to a critical project and work within an embedded team .\n\nThis role will be based in Derby and will initially be working a 2-shift pattern Monday to Friday. There is a high possibility that it will increase to a 3-shift pattern from February 2026.\n\nYour Missions:\n\n📝 Author and manage commissioning test procedures and prepare safe systems of work\n\n📝 Maintain accurate records of test results\n\n🧩 Conduct commissioning tests and analyze results\n\n🗣️ Communicate effectively and manage processes\n\n🛠️ Carry out Commissioning duties on systems such as; Nuclear, conventional and environmental safety systems, wastewater tanks, Nuclear qualified cranes.\n\nWhy join the community of Switchers?:\n\n💥 Assystem has over 55 years of experience in nuclear engineering. We are among the top 3 largest nuclear engineering companies.\n\n💥 Collaborative Environment: Join a dynamic team of experts who are passionate about driving progress and supporting each other's growth.\n\nQualifications\n\nPROFILE\n\nYour strengths and prerequisites for success\n\n🛠️ Experienced with commissioning Gas, Fluid and Vacuum systems and Mechanical handling equipment\n\n🛡️Familiar with Licence Condition 21 site arrangements, Health and Safety standards, permits, and safety case adherence\n\n🔧To able to perform initial operator duties during commissioning testing phases. (i.e., Non active commissioning).\n\n📝 Previous Experience of witnessing, supervision, and acceptance of vendor and supplier testing on-site.\n\n📄 Skilled in authoring test procedures and reports\n\n🧠Understanding of design, construction, and handover processes\n\nAdditional Information\n\nPlease be aware that many roles at Assystem are subject to both security and export control restrictions.\n\nThese restrictions mean that factors such as your nationality, any nationalities you may have previously held, and your place of birth can restrict the roles you are eligible to perform within the organisation.\nAll applicants must as a minimum achieve Baseline Personnel Security Standard. Many roles also require higher levels of National Security Vetting where applicants must typically have 5 to 10 years of continuous residency in the UK depending on the vetting level required for the role, to allow for meaningful security vetting checks.We are committed to equal treatment of candidates and promote, as well as foster all forms of diversity within our company. We believe that bringing together people with different backgrounds and perspectives is essential for creating innovative and impactful solutions. Skills, talent, and our people’s ability to dare are the only things that matter !.\n\nNOTICE TO CANDIDATES ON RECRUITMENT FRAUD - We are committed to safeguarding candidates from fraudulent activity associated with our recruitment process. Please note that we will never offer specialist CV writing services, request payment or ask for sensitive personal information during the recruitment process.\n\nWe are committed to equal treatment of candidates and promote, as well as foster all forms of diversity within our company. We believe that bringing together people with different backgrounds and perspectives is essential for creating innovative and impactful solutions. Skills, talent, and our people’s ability to dare are the only things that matter !. Bring your unique contributions and help us shape the future

Are you a skilled automation professional looking to take ownership of complex engineering projects? We are partnering with a leading specialist machinery manufacturer to find a Control Systems Engineer. In this dynamic role, you will be fully involved in all aspects of controls engineering, from initial software design through to final commissioning.\n\nWorking with cutting-edge automated machinery, the successful Control Systems Engineer will deliver robust PLC and HMI programming solutions for bespoke packaging machinery and special-purpose automation equipment.\n\nKey Responsibilities\n\n Control Systems Design: Lead the design, development, and implementation of new, advanced industrial control systems and associated equipment.\n\n PLC & HMI Programming: Develop, code, and optimize PLC and HMI software, focusing primarily on Allen-Bradley (Rockwell) platforms.\n\n Legacy Equipment Support: Utilise Mitsubishi PLC platform knowledge to support, upgrade, and maintain existing legacy control systems and machines.\n\n Documentation & Specifications: Convert project requirements into technical documentation, including Functional Design Specifications (FDS), Detailed Design Specifications, and software manuals.\n\n Testing & Commissioning: Execute factory acceptance testing (FAT), site acceptance testing (SAT), and hands-on, on-site machine commissioning.\n\n Collaborative Support: Partner with production, support sales teams with technical expertise to identify customer needs, and build strong client relationships.\n\nWhat We Are Looking For\n\n Education: An HNC, HND, or higher qualification in a relevant engineering discipline.\n\n Essential PLC Experience: A minimum of 3 years of professional experience writing code for Allen-Bradley (Rockwell) PLCs, though candidates with more experience are highly encouraged to apply.\n\n Desirable PLC Experience: Previous experience writing code for Mitsubishi PLCs is highly desirable to assist with older machinery lines.\n\n Industry Background: Proven experience working within the packaging machinery or automation sectors is ideal. Experience with motion control and servo systems is also advantageous.\n\n Project Delivery: The ability to execute multiple project responsibilities simultaneously while working to tight deadlines.\n\n Flexibility: A self-starter with a positive attitude who is prepared to travel nationally and internationally for commissioning when required.\n\nBenefits & Culture\n\nThis company takes pride in fostering an open, productive team culture where technical expertise and personal responsibility are highly valued. Alongside a competitive salary, they offer an excellent work-life balance package:\n\n 5 days annual leave plus bank holidays.\n\n A manageable 38-hour working week based on-site.\n\n Flexible start and finish times to suit your routine.\n\n A 1-in-3 Friday rota that accommodates a shorter 9:30am to 3:30pm shift, giving you an early start to your weekend.\n\nRipple Recruitment is acting as an employment agency for this vacancy. My client is an equal opportunity employer committed to fostering a diverse and inclusive workplace. Due to high volumes of interest, we can only respond to shortlisted applicants

Technical Manager- Fire and Gas Systems SME\nCertain Advantage is hiring for a Technical Manager- Fire and Gas Systems SME based in the Derby area.\nThis role is on a contract basis and is mostly remote.\n\nThe Company\nWe’re working with an engineering company specialising in solving complex engineering challenges across industries—from aerospace and automotive to healthcare and semiconductors.\nDoes this sound like your next career move?\nIf you’re ambitious to grow, this may be your next role?\n\nThe Role:\nThis role is for a Technical Manager- Fire and Gas Systems SME—someone ambitious and ready to make an impact. You’ll be results-oriented and driven to succeed.\nYou’ll be leading a small, experienced, and collaborative team, and be responsible for:\n\nRequirements validation and specification.\nConduct any Risks & Hazards assessment to support design and specifications.\nSupport technical specification and selection of sensors and systems for gaseous fuel detection, oil mist detection and fire detection across.\nEnsure designs comply with applicable international and regional safety standards and codes (e.g., NFPA, IEC, ISO, ATEX).\nOversee installation and commissioning of safety systems.\nDevelop and execute test protocols to validate system performance and compliance.The Individual \nWe’re looking for people who can show:\n\nEducational background to a Bachelor’s or Master’s. degree in Engineering (Mechanical, Chemical, Instrumentation, others)\nExpertise in safety systems for gas turbine power plants.\nKnowledge of gas detection technologies (e.g., infrared, catalytic bead, electrochemical sensors).\nStrong background in fire detection and suppression systems (e.g., CO₂, FM-200, NOVEC 1230, water mist).\nIn-depth knowledge of safety codes and standards applicable to fuel systems and turbine environments.\nSystem testing and validation.\nSupplier vetting and engagement for safety system components.The Benefits:\n\nSalary of up to 80 000 per annum\nMostly remote - travel once per month/quarter\nTraining and Development\nCareer progressionDoes this sound like your next career move? Apply today.\nWorking with Certain AdvantageWe go the extra mile to find the best people for the job. If you’re hunting for a role where you can make an impact and grow your career, we’ll work with you to find it.\nWe work with businesses across the UK to find the best people in Finance, Marketing, IT and Engineering. If this job isn’t for you, head to (url removed) and register for job alerts and career guidance tips

Company Description\n\n Today, Assystem is among the top three independent nuclear engineering firms worldwide. With over 60 years of experience in highly regulated sectors, the group supports public and industrial stakeholders in the execution of complex and strategic infrastructure projects, subject to high safety and security requirements. \n\nAssystem mobilizes 8,000 experts in 13 countries and intervenes across the entire project lifecycle, in engineering, project management and digital solutions.\n\nJob Description\n\n📍 Location: Derby\n📝Contract role – Inside IR35\n\nYour future team:\n\nYou will be joining a dynamic and collaborative commissioning team on-site at our Client in Derby\n\nThis is an exciting opportunity for a contractor looking to contribute to a critical project and work within an embedded team. \n\nThis role will be based in Derby. There is a high possibility that it will increase to a shift pattern later down the line as it moves into the next phase. \n\nYour Missions:\n\n📝 Author and manage commissioning test procedures and prepare safe systems of work\n\n📝 Maintain accurate records of test results\n\n🧩 Conduct commissioning tests and analyse results\n\n🗣️ Communicate effectively and manage processes\n\n🛠️ Carry out Commissioning duties on systems such as; Nuclear, conventional and environmental safety systems, control systems, process monitoring and control instrumentation, wastewater tanks, Nuclear qualified cranes.\n\nQualifications\n\nYour strengths and prerequisites for success: \n\n🛠️Experienced with commissioning electrical, instrumentation, and control systems on a Nuclear Licensed site\n\n🛡️Familiar with Licence Condition 21 site arrangements, Health and Safety standards, permits, and safety case adherence\n\n🔧able to perform initial operator duties during commissioning testing phases. (i.e., Non active commissioning).\n\n📄 Skilled in authoring test procedures and reports\n\n🧠Understanding of design, construction, and handover processes\n\nAdditional Information\n\nPlease be aware that many roles at Assystem are subject to both security and export control restrictions.\n\nThese restrictions mean that factors such as your nationality, any nationalities you may have previously held, and your place of birth can restrict the roles you are eligible to perform within the organisation.\nAll applicants must as a minimum achieve Baseline Personnel Security Standard. Many roles also require higher levels of National Security Vetting where applicants must typically have 5 to 10 years of continuous residency in the UK depending on the vetting level required for the role, to allow for meaningful security vetting checks.We are committed to equal treatment of candidates and promote, as well as foster all forms of diversity within our company. We believe that bringing together people with different backgrounds and perspectives is essential for creating innovative and impactful solutions. Skills, talent, and our people’s ability to dare are the only things that matter !. Bring your unique contributions and help us shape the future.\n\nNOTICE TO CANDIDATES ON RECRUITMENT FRAUD - We are committed to safeguarding candidates from fraudulent activity associated with our recruitment process. Please note that we will never offer specialist CV writing services, request payment or ask for sensitive personal information during the recruitment process.\n\nWe are committed to equal treatment of candidates and promote, as well as foster all forms of diversity within our company. We believe that bringing together people with different backgrounds and perspectives is essential for creating innovative and impactful solutions. Skills, talent, and our people’s ability to dare are the only things that matter !. Bring your unique contributions and help us shape the future

Job Title: Mechanical Design Engineer\n\nType: Full-Time Permanent\n\nLocation: Derbyshire\n\nClient Overview\n\nOur client is a well-established UK engineering and manufacturing business specialising in the design and production of advanced packaging and automation machinery. With a strong reputation for innovation, quality, and engineering excellence, they deliver bespoke solutions to customers across highly regulated industries.\n\nJob Responsibilities\n\n Support mechanical engineering projects from concept design through to commissioning\n\n Design components, assemblies, and machinery using SolidWorks or similar CAD software\n\n Produce detailed manufacturing drawings, BOMs, and technical documentation\n\n Develop innovative engineering solutions for packaging and automation equipment\n\n Ensure designs comply with relevant regulatory and health & safety standards\n\nSkills Required\n\n Experience designing packaging machinery and/or automation equipment\n\n Degree-qualified in Mechanical Engineering, Design Engineering, or a related discipline\n\n Strong working knowledge of SolidWorks or similar 3D CAD packages\n\n Excellent problem-solving, organisational, and communication skills\n\nCompensation & Other Benefits\n\n Competitive salary package\n\n Opportunity to work on innovative projects\n\n Career development and progression opportunities\n\nPlease note that our client is unable to offer sponsorship for employment visas. Due to the high volume of applications received, only shortlisted candidates will be contacted. If you do not hear from us within 14 days of applying, please assume that your application has not been successful

My Client is recruiting for a Mechanical Site Manager/Supervisor in the Water Sector\n\nLocation: Ideally Midlands based to mostly work sites in Midlands and Office in Derby\n\nRole Summary\n\nPrimarily responsible for undertaking site management / supervision of mechanical & electrical installations, dry & wet commissioning, maintenance & AFM works and the technical / hands on support of Companies Wastewater Products and Solutions. Working under their own initiative with minimal supervision to provide our customers with a high-quality service, the work will encompass installation, commissioning, inspections, training, fault finding, repairs and making recommendations to external customers as well as internal colleagues.\n\nThe range of products will encompass all wastewater products but typically ballast treatment systems.\n\nTakes day to day direction from the Field Service Manager on all assignments and tasks. Will Have a close working relationship with the project managers and process commissioning engineers.\n\nKey Responsibilities\n\nResponsible for the supervision and managerial site lead of mechanical and electrical installations plus lead commissioning [dry and wet] of all site-based company activities, having a working knowledge of wastewater treatment processes. Will solicit guidance, advice and assistance from control systems engineers, mechanical, electrical and process engineers whilst directed by the project manager and the field service manager, concluding in the successful delivery of a treatment process solution.\nResponsible for planning, documenting and executing equipment offloading and site installations for the full range of Company Wastewater products and systems. Mechanical and electrical installations are to be completed to good engineering practice, client specifications and in accordance with contract designs and documentation.\nResponsible for planning, documenting and executing dry and wet commissioning of wastewater treatment processes for the full range of Company Wastewater products & systems. Commissioning is to be completed to good engineering practice, client specifications and in accordance with company designs and documentation.\nResponsibility for Environmental and H&S requirements whilst on site, ensuring all relevant control measures are in place. This will include the generation and completion of relevant risk assessments, method statements and the enforcement/undertaking of all relevant legislative training requirements. Ensuring that all other activities undertaken on-site have associated method statements, risk assessments & permits to work in place. The co-ordination of Company Water Technologies service activities on customer sites to ensuring compliance with site rules and requirements.\nResponsible for ensuring that all site records and reports pertaining to the installation and commissioning are completed in line with company procedures; and are sent to the project manager within specified time limits.\nResponsible for executing work required for all completed projects in the contract warranty phase. Will interface with client and coordinate efforts with the project manager and engineers to execute work that has been deemed to be genuine warranty work. To execute the adopted solution and provide customer satisfaction whilst addressing the issue raised.\nTo build relationship & partnerships with our external customers and suppliers whilst executing the assigned work. To provide lessons learn feedback to the FSM and engineers.\nWhen not site based, the role requires you to occasionally attend the Company offices in Derby. You will assist with the following two major functions:\nEquipment inspection, assembly works and office delivery and dispatch logistics.\nAssist the field service manager, project managers and engineers with managing, communicating and preparing documentation for suppliers. \n\nQualifications & Experience\n\nAbility to work at remote sites either on own, or with others, and commitment to vary working hours to meet the needs of the role.\nWillingness to travel and work in different geographical locations which will necessitate periods away from home.\nAbility to travel/work abroad for short periods when opportunities arise.\nAbility to assimilate information gained on job/training and apply learning.\nAbility to manage workload and adapt to varying business demands.\nAbility to read Engineering Drawings.\nComputer literacy\nValid UK driving license\nHold valid SMSTS or SSSTS.\nHND/HNC/City & Guilds Engineering or similar\nApprenticeship in electrical/instrument/process control or similar\nValid CSCS/CCNSG.\nValid H&S qualification.\nValid First Aid 4-day (Desirable)\nCommercial awareness (Desirable)\nUnderstanding of CDM regulations (Desirable)\nExperience in water treatment fault finding, commissioning, maintenance (Desirable)

TXM Recruit are recruiting 3 permanent Operations Technicians based in Derby.\n\nLocation: Derby\n\nShifts: Monday - Thursday 08.00 – 5pm/ Friday – 08.00am – 2.30pm\n\nSalary: £30,000k - £42,000k\n\nWe are looking for individuals from a rail or rolling stock background predominantly however individuals from the following Industries considered: Rolling Stock / RAIL/ Royal Navy / RAF / REME / British Army/ General Engineering/Aerospace/Automotive who have experience within the field of mechanical engineering and overhaul experience\n\nPrimary Purpose of the Role:\n\nTo carry out Overhauls and repairs in a workshop environment on various rail projects including:\n\nHVAC units for trains\n\nTo carry out Overhauls and repairs on HVAC units whilst ensuring health and safety procedures are followed at all times. Ensuring that high levels of productivity, attendance and customer satisfaction are maintained at all times.\n\nThis will include the following:\n\n Isolate power sources and lockout/tagout all electrical systems\n\n Gather tools, cleaning agents, PPE, and documentation (electrical schematics, manuals)\n\n Set up a clean work bench, organized workspace for disassembly\n\nDisassembly\n\n Carefully dismantle all components in a logical sequence\n\n Store fasteners and small parts in clearly marked containers\n\nInspection & Assessment\n\n Check all mechanical components for wear, corrosion, cracks, or deformation\n\n Check all electrical components for wear, corrosion, cracks or faults\n\n Inspect all electrical wiring, electrical connectors, and insulation for damage\n\n Identify any parts that need repair or replacement\n\n Clean components using appropriate chemicals (degreasers, contact cleaners, etc.)\n\n Remove dirt, corrosion, and old lubricants\n\n Ensure components are fully dry before moving on\n\nElectrical Testing\n\n Use a multimeter to test continuity, resistance, and voltage where applicable\n\n Verify integrity of electrical circuits, switches, and connections\n\n Flag any faulty components for replacement\n\n Repair or Replace damaged or worn parts\n\n Recondition components where possible (e.g. re-lubrication, minor fixes)\n\nReassembly\n\n Reassemble in reverse order of disassembly\n\n Follow torque specs and alignment guidelines\n\n Reconnect all electrical systems carefully\n\nFinal Testing & Commissioning\n\n Perform functional testing of the full system\n\n Check for proper operation under normal conditions\n\n Verify safety systems and fail-safes\n\n Document results and sign off\n\nEnsuring that high levels of productivity, attendance and customer satisfaction are maintained at all times.\n\nKey Duties and Responsibilities:\n\nYour duties and responsibilities will include but are not limited to the following:\n\nCarry out routine maintenance and repairs on various mechanical equipment.\n\nStripping and rewiring electrical components as well as electrical testing.\n\nElectrical knowledge, fault finding and exchanging electrical components\n\nUsing in house reporting ensure all work is quoted and completed on time.\n\nPressure washing and cleaning of components using various chemicals\n\nRead and interpret technical manuals and schematics.\n\nComplete maintenance records and documentation accurately.\n\nElectrical fault finding\n\nEnsure your workspace in clean and organised at all times.\n\nEnsure all Health and Safety procedures and adhered to at all times.\n\nWork as part of a team to meet operational deadlines\n\nSupport continuous improvement and reliability initiatives.\n\nGeneral:\n\nTo work in a manner that reflects the Company values; deliver results, customer focus,\n\ninsist on highest standards, ownership and accountability teamwork.\n\nProviding high standards of quality whilst promoting, building and maintaining effective working relationships with colleagues, suppliers and customers.\n\nIdentifying training needs relevant to the job and participating in any training and development as required.\n\nMaintaining high levels of personal motivation, attendance and conduct.\n\nPerson Specification:\n\nEssential:\n\nExperience of working within a similar role.\n\nEffective and professional communication skills - verbal and written.\n\nDetailed oriented and ability to multitask.\n\nAble to work individually or as part of a team.\n\nLogical troubleshooting skills.\n\nDesirable:\n\nPrevious experience in the rolling stock/rail industry would be advantageous.\n\nElectrical knowledge, fault finding and exchanging electrical components\n\nAble to read mechanical engineering drawings.\n\nFull UK clean driving licence.\n\nFork Lift Truck license. Overhead Crane License

Mobile Service Engineer – Air Conditioning\nLocation: Derby & Surrounding Areas\nContract: Permanent, 40 hrs/week (8 am–4:30 pm)\nPackage: Up to £50,000, Door2Door, Van (Personal Use) etc - OTE £60,000+\nAre you a field-based AC specialist ready for your next challenge?\nJoin a dynamic engineering team delivering first-class service across Derby and the wider region. We have a permanent opportunity for a skilled Mobile Service Engineer to cover scheduled maintenance, rapid breakdown response, and light installations.\nWhat You’ll Do\n Conduct planned PPM visits on air-conditioning, refrigeration, and heat-pump systems\n Respond to breakdowns and carry out timely repairs\n Complete small-scale installations and site surveys\n Assist with tender preparation (materials & labour estimates)\n Participate in an on-call rota (including occasional out-of-town work)\n Generate clear, professional daily job reports\n Advise clients on site and mentor junior engineers\nMust-Have Qualifications & Experience\n City & Guilds 2079 F-GAS Categories 1 & 4\n City & Guilds Refrigeration, Air Conditioning & Heat Pumps Levels 1 & 2\n Proven field experience fault-finding, repairs & PPM on M&E systems\n Strong knowledge of HVAC controls and basic electrical systems\n Familiarity with Legionella L8 water testing and emergency-lighting checks\n Computer literate with a clean driving licence\n Comfortable working in occupied premises and engaging professionally with the public\nDesirable Add-Ons\n C&G Level 3 Electrical Installation, Commissioning & Inspection qualifications\n 2382-22 IET Wiring Regulations (18th Edition)\n Emergency lighting to BS 5266\n CSCS, PASMA, IPAF or similar site-safety certifications

Service Engineer – electro-mechanical Ongoing Training Provided\n\nDue to expansion this highly successful industrial automation machine vendor is looking to recruit a service engineer with experience of fault-finding and repair, new machine installation and commissioning\n\nTo work with advanced machinery for a variety of industrial applications.\n\nThe role requires a methodical engineer with strong electrical and good mechanical experience to fault find, repair, service and install advanced machines. A good background in electro – mechanical engineering and an electrical qualification is ideal\n\nThe role requires good customer skills and problem solving skills and will involve travelling to customer sites. A car, expenses and overtime are provided\n\nKeywords: Service Engineer, Electrical, Electronics, Mechanical, Field Service, Service Engineer, Field Service, Installation Engineer, Service Technician, Field Engineer, Breakdown Engineer, commissioning, Electrical and mechanical, Electrically biased, Electrical bias, cnc plc Electrical Engineering

Are you an innovative mechanical design professional with a passion for bringing complex machinery from concept to reality?\n\nWe are partnering with a leading manufacturer to find a skilled Mechanical Design Engineer who deliver specialist engineering expertise for automated systems, bespoke machinery, and advanced packaging machinery.\n\nIn this role, you will play a pivotal part in the entire project lifecycle, utilising SolidWorks to provide high-quality, cost-effective mechanical design solutions from initial concept to final commissioning.\n\nKey Responsibilities\n\n SolidWorks CAD Modelling: Design detailed components, mechanisms, and complex assemblies in SolidWorks, ensuring precise tolerancing and manufacturing notes.\n\n Full Lifecycle Mechanical Design: Take accountability for mechanical design projects, from creating design specifications down to final machine commissioning.\n\n Specification & Documentation: Assist with writing User Requirement Specifications, manage Bill of Materials (BOMs), and produce essential technical file documentation.\n\n Prototyping & Testing: Research uncertain processes and validate your mechanical design concepts by building and testing prototypes.\n\n Project Coordination: Oversee the procurement of specialist components, assist in managing sub-contract manufacturing, and coordinate machine commissioning.\n\n Compliance & Standards: Ensure all mechanical design work complies with relevant industry regulations, including EC Directives and health and safety requirements.\n\nWhat We Are Looking For\n\n Education: A degree-level qualification in mechanical engineering, product design, or a closely related discipline.\n\n Software Expertise: Strong, competent knowledge and professional workplace experience utilising the SolidWorks CAD package.\n\n Industry Experience: Proven experience in the mechanical design of packaging machinery, automation equipment, jigs, or fixtures.\n\n Sector Knowledge: Experience working with medical devices or medical packaging is a distinct advantage.\n\n Technical Insights: A practical understanding of engineering principles, manufacturing methods, and workshop machinery.\n\n Core Skills: Exceptional problem-solving abilities, a strong eye for detail, and the organisational skills needed to meet tight project deadlines.\n\nSalary & Benefits\n\n up to £45,000, dependant upon experience\n\n 5 days on site in Derby\n\n 25 days per year + bank holidays\n\n 38 hour working week with flexible start times and early finish on Friday\n\n * 5% employee, 4% employer pension contribution\n\nWhy Apply?\n\nThis is an excellent opportunity to progress your mechanical design career in an open, productive culture where engineering excellence is celebrated. Working with SolidWorks daily, you will have the autonomy to develop innovative solutions while contributing to continuous improvement and lean manufacturing initiatives.\n\nRipple Recruitment is acting as an employment agency for this vacancy. My client is an equal opportunity employer committed to fostering a diverse and inclusive workplace. Due to high volumes of interest, we can only respond to shortlisted applicants

Registered Manager – Children’s Residential Home\nFull Time | Permanent\n\nThe Opportunity\n\nWe are recruiting an experienced Registered Manager to lead a Children’s Residential Home supporting young people with social, emotional and behavioural needs (SEMH).\n\nThis is a senior leadership role responsible for compliance, operational performance, safeguarding standards and the overall quality of care within the home.\n\nThe position is suitable for experienced residential leaders seeking autonomy, accountability and the opportunity to shape culture and outcomes within a regulated environment.\n\nThe Role\n\nLeadership & Team Management\n\n• Provide strong, inspirational leadership to the senior team and wider staff group\n• Line manage managers and delegated staff, ensuring high standards of supervision and development\n• Promote a positive, accountable and values-led culture\n• Oversee recruitment, workforce planning and staff deployment\n• Ensure mandatory training compliance exceeds required standards\n\nOperational Management\n\n• Oversee referrals, admissions and placement matching\n• Ensure effective use of care management and reporting systems\n• Maintain staffing levels aligned to children’s needs\n• Contribute to strategic planning and service development\n• Deliver against agreed occupancy and performance targets\n\nQuality Assurance & Compliance\n\n• Ensure full compliance with statutory and regulatory frameworks, including Ofsted\n• Audit care provision against national standards and local authority requirements\n• Oversee care plans, risk assessments and activity planning\n• Investigate incidents, complaints and safeguarding concerns appropriately\n• Lead on disciplinary and performance processes where required\n\nFinancial & Resource Management\n\n• Manage the home within agreed budgets\n• Monitor agency usage and temporary staffing\n• Oversee financial controls including petty cash and resource allocation\n\nSafeguarding & Health & Safety\n\n• Maintain a strong safeguarding culture\n• Ensure health and safety compliance across the service\n• Promote a child-centred, structured and safe environment\n\nEssential Requirements\n\n• Recognised Social Work qualification or Level 4+ professional qualification relevant to children\n• Level 4+ Management/Leadership qualification\n• Eligibility for or completion of Level 5 Diploma in Leadership for Health & Social Care (if applicable)\n• Minimum 2 years’ experience in residential childcare within the last 5 years\n• At least 1 year managing and supervising staff\n• Experience working with young people with SEMH\n• Strong knowledge of children’s residential regulations and safeguarding\n• Enhanced DBS suitable for working with children\n• Full UK driving licence\n\nDesirable\n\n• Experience working with Local Authority commissioning teams\n• Experience implementing business growth or service expansion\n• Experience managing HR processes\n• Fieldwork or social work background\n\nIdeal Candidate\n\nYou are operationally strong and compliance-focused.\nYou understand Ofsted frameworks and regulatory accountability.\nYou combine safeguarding leadership with business acumen.\nYou lead with integrity, structure and consistency.\n\nYou are confident managing budgets, performance and staff culture while maintaining a child-centred ethos.\n\nWhat’s On Offer\n\n• Permanent senior leadership position\n• Opportunity to shape service development\n• Support from regional leadership structure\n• Ongoing professional development

Installation and Commissioning Engineer (s)\n\nDerby base - UK coverage\n\nto c£55k neg dep exp + generous benefits, overtime, pension and bonus schemes\n\nOur Derby based client has been established for more than 30 years and is renowned as a market leader in the provision of innovative and bespoke integrated systems, primarily to the transportation, airport and power infrastructure industry, and as a result of continued success and an ongoing planned programme of strategic growth, they are now seeking to recruit a number of experienced and ambitious Installation and Commissioning Engineer professionals to complement their established and successful team of electrical and control professionals delivering end to end control system solutions.\n\nWorking a combination of days and nights, the role of Installation and Commissioning Engineer works alongside the project team and the development engineers during the commissioning stages of multiple projects and ensuring a smooth handover to the customer. Ideally with a background in the control system industry, core duties will include (but not be limited to):\n\nChecking installation of equipment is to the correct standard prior to starting testing.\nPerforming testing of a system according to the Installation and Commissioning Test document.\nPLC data input tests including verification of operation to and from plant and field devices into PLCs.\nField device set-up\nPerforming site acceptance tests, fault find and correction of any PLC code or wiring issues.\nProducing documentation such as RAMs; test documentation; weekly progress reports etc.\nAttending site progress meetings, toolbox talks etc and providing professional representation of the business especially during client-facing test conditions.To be considered for the varied and challenging Installation and Commissioning Engineer positions offering genuine scope for career progression and development, it is envisaged that successful candidates will demonstrate at least 2 years relevant installation and commissioning engineer work experience and be qualified to at least HND level or above in electrical or control engineering. \n\nEssentially you will hold a full UK driving licence, an EDU/EEA/Swiss passport for working in Europe and have no criminal convictions due to security clearances required by airport authorities.\n\nIn return and in addition to a generous salary negotiable based on experience, benefits include 33 floating holidays to take when you like with your entitlement increasing by an additional 2 days every 5 years, paid overtime, a Company performance-related bonus as well as Health & Wellbeing benefits, Pension scheme, Anniversary celebrations and social events as well as a Flexible working hours scheme.\n\nContact the Service Team at Premier Technical Recruitment on (phone number removed) or email your cv in confidence to for further details

Working here isn’t just a job. You can advance your career at Avove, and we’ll reward you with a range of benefits that recognise great work. We provide full training and continuous development to help you reach your potential. We strive to create an inclusive working environment where everyone can be themselves. Join us and take the next step towards a fulfilling career.\nWe understand the impact our work has on our society and the environment. It’s the difference we make that improves people’s lives and helps the economy to grow. We work alongside our customers to deliver resilient, bespoke infrastructure solutions that keep the taps running, the energy flowing and people connected. The work we do together matters.\nAbout the role:\nDue to continued contract growth, we are seeking a Project Engineer to join our delivery team. You will support the design, build, and commissioning phases of projects, working closely with Project and Site Managers to ensure programmes and budgets are met.\nSalary: £44,000 - £56,000 Depending on experience\nCompany Car or Car allowance\nKey Responsibilities:\n Support the Project Manager in managing engineering activities and monitoring progress against the project plan.\n Ensure correct material specifications, timely procurement, and maintain material schedules.\n Provide on-site support to resolve engineering issues and support quality and safety support.\n Assist with procurement, H&S documentation and commissioning procedures.\n Ensure compliance with statutory legislation, company standards, and HSQE requirements.\n Prepare project documentation including procurement schedules, RAMS, SWPs, with input into programmes and Forecasting\n Coordinate with clients and subcontractors on H&S audits and inspections.\n Support site activities to maintain programme and QA/ITP compliance.\n Apply basic NEC contract knowledge (time, cost, EWNs) and contribute to quality planning.\nSkills and Experience:\n Familiarity of MEICA projects from a design or delivery background.\n Process knowledge in Water Treatment and/or Waste Treatment, and process control knowledge.\n Familiarity of control systems, manual and actuated valves, instrumentation and quality instrumentation.\n Understanding of hydraulic systems, pumping systems and pressure systems.\n Proficiency in MS Project for creating detailed programmes and cost build-ups.\n * Good experience in using MS Word, Excel and Project.\nWhat’s it in for you:\nWe offer a rewarding salary that is tailored to your skills and experience. But that’s not all! We celebrate hard work and give recognition to our colleagues. In addition to this, we understand that one size doesn’t fit all, so everyone has access to a variety of flexible benefits that work for you.\n 24 days holiday plus bank holidays\n Company pension scheme\n Life assurance\n A selection of lifestyle benefit options\n Financial wellbeing programme\n Employee assistance program for health and wellbeing and onsite mental health first aiders to support our colleagues.\n We love to give back so we offer you volunteering days in your community and charity matched giving where we will boost your fundraising.\n Rewards initiative for achieving recognised professional qualifications.\nAbout us:\nWe design, build and maintain the UK’s utilities infrastructure to help transform local communities for the better. We provide cutting-edge and sustainable engineering solutions and play a critical role in helping to keep the water running, the lights on and people connected.\nWe are an expert, responsible and agile partner, providing vital services to water and power sectors. We work closely with our clients to help protect and improve their assets, enhance customer experience and protect the natural environment. Everything we do is designed to drive continual improvement and move life forward.\nWe are proud to work in partnership with leading utility providers, including Severn Trent, United Utilities, Yorkshire Water, Northern PowerGrid, Northumbrian Water Group, and Scottish Power Energy Networks.\nWe are an equal opportunities employer:\nWe welcome applications from candidates of all races, genders, disabilities, religions, ages and sexual orientations. We know that having a diverse workforce encourages new perspectives, inspires creativity and creates an engaging workplace and we are committed to creating an inclusive environment where all colleagues can thrive. When it comes to inclusion, we’re making sure we keep up the progress with our Communities of Practice, who help us do just that.\nWhat next:\nWe encourage you to apply for this role as soon as you can. We recognise talent waits for no one, so we progress candidates individually through all stages of recruitment process.\nIf you have any questions, please reach out for an informal discussion

TXM Recruit are recruiting a permanent Rail Support Technician (Electrical biased) based in Derby.\nLocation: Derby\nShifts: Monday - Thursday 08.00 – 5pm/ Friday – 08.00am – 2.30pm\nSalary: Competitive Salary\nWe are looking for individuals from a rail or rolling stock background predominantly however individuals from the following Industries considered: Rolling Stock / RAIL/ Royal Navy / RAF / REME / British Army/ General Engineering/Aerospace/Automotive who have experience within the field of electrical engineering and overhaul experience.\nPrimary Purpose of the Role:\nTo carry out Overhauls and repairs in a workshop environment on various rail projects including:\nTraction motors\nFans & heaters\nWater cooler pumps\nThis will include the following:\n Isolate power sources and lockout/tagout all electrical systems\n Gather tools, cleaning agents, PPE, and documentation (electrical schematics, manuals)\n Set up a clean work bench, organized workspace for disassembly\nDisassembly\n Carefully dismantle all components in a logical sequence\n Store fasteners and small parts in clearly marked containers\nInspection & Assessment\n Check all mechanical components for wear, corrosion, cracks, or deformation\n Inspect all electrical wiring, electrical connectors, and insulation for damage\n Identify any parts that need repair or replacement\n Clean components using appropriate chemicals (degreasers, contact cleaners, etc.)\n Remove dirt, corrosion, and old lubricants\n Ensure components are fully dry before moving on\nElectrical Testing\n Use a multimeter to test continuity, resistance, and voltage where applicable\n Verify integrity of electrical circuits, switches, and connections\n Flag any faulty components for replacement\n Repair or Replace damaged or worn parts\n Recondition components where possible (e.g. re-lubrication, minor fixes)\nReassembly\n Reassemble in reverse order of disassembly\n Follow torque specs and alignment guidelines\n Reconnect all electrical systems carefully\n8. Final Testing & Commissioning\n Perform functional testing of the full system\n Check for proper operation under normal conditions\n Verify safety systems and fail-safes\n * Document results and sign off\nEnsuring that high levels of productivity, attendance and customer satisfaction are maintained at all times.\nKey Duties and Responsibilities:\nYour duties and responsibilities will include but are not limited to the following:\nCarry out routine maintenance and repairs on various mechanical equipment.\nStripping and rewiring electrical components as well as electrical testing.\nElectrical knowledge, fault finding and exchanging electrical components\nUsing in house reporting ensure all work is quoted and completed on time.\nPressure washing and cleaning of components using various chemicals\nRead and interpret technical manuals and schematics.\nComplete maintenance records and documentation accurately.\nElectrical fault finding\nEnsure your workspace in clean and organised at all times.\nEnsure all Health and Safety procedures and adhered to at all times.\nWork as part of a team to meet operational deadlines\nSupport continuous improvement and reliability initiatives.\nGeneral:\nTo work in a manner that reflects the Company values; deliver results, customer focus,\ninsist on highest standards, ownership and accountability teamwork.\nProviding high standards of quality whilst promoting, building and maintaining effective working relationships with colleagues, suppliers and customers.\nIdentifying training needs relevant to the job and participating in any training and development as required.\nMaintaining high levels of personal motivation, attendance and conduct.\nPerson Specification:\nEssential:\nExperience of working within a similar role.\nEffective and professional communication skills - verbal and written.\nDetailed oriented and ability to multitask.\nAble to work individually or as part of a team.\nLogical troubleshooting skills.\nDesirable:\nPrevious experience in the rolling stock/rail industry would be advantageous.\nElectrical knowledge, fault finding and exchanging electrical components\nAble to read mechanical engineering drawings.\nFull UK clean driving licence.\nFork Lift Truck license. Overhead Crane License

Be part of a forward-thinking engineering business delivering advanced control and automation solutions for energy, infrastructure, and technology projects across the UK. Employees enjoy competitive pay, strong development support, and a collaborative team culture that values ownership and innovation. With varied, meaningful projects and clear opportunities for progression, this is an ideal environment for ambitious engineers who want to grow and make a real impact.\nControl Systems Engineers\n£40,000 - £60,000 + Pension, Profit Share, Paid Overtime, On-Site Gym\n£500 per year cash benefit for leisure activities\nPaid day off for your birthday\nDerbyshire. Ref: 24272\nThe Control Systems Engineers will work across a portfolio of complex BESS OR Infrastructure projects. With the majority of work bespoke, you will have the opportunity to develop systems from scratch for time critical systems, for a company who have successfully increased their turnover from £3M to £15M in just three years.\nControl Systems Engineers - The Role:\n Concept PLC, HMI & SCADA software design & development\n Design & configuration of industrial networks\n Liaising directly with customers to support on all projects\n Completion of all documentation including FDS\n Site installation & commissioning\nControl Systems Engineers - The Person:\n Ideally, you will have solid experience in the design of PLC/HMI AND SCADA software HOWEVER we are also open to Engineers who are particularly skilled with PLC OR SCADA\n The larger variety of control systems you have worked with, the better, however you should be competent with at least one of the following: Siemens, Schneider, Rockwell\n Able to read/modify electrical schematics - if you are able to create them, even better\n Competent with carrying out FAT/SAT including supporting documentation\n Preferably hold a BEng/BSc of higher in an electrical based subject, however experience is key for these roles\n * Essential to be able to complete all documentation including FDS, FAT & SAT\nWe are looking for Engineers happy to be office based with c20% of your time spent on site for UK based projects.\nLocated on the Derbyshire border, this role would be commutable from Nottingham, Derby, Ripley and Loughborough.\nFor further information please call John Anderson

Field Service Engineer (160jc) – Derby with International Travel – up to £40k + Benefits\n\nAre you a technically skilled military engineer ready to deploy your expertise in a civilian role where precision, discipline and professionalism genuinely matter?\n\nDUE TO THE NATURE OF THIS RECRUITMENT CONSULTANCY, WE ARE ONLY ABLE TO REPRESENT INDIVIDUALS WHO ARE EX MILITARY.\n\nMy client is seeking a Field Service Engineer to install, maintain and support specialist medical equipment across the UK and overseas. This role is ideally suited to former Royal Signals personnel, RAF engineers, Royal Navy weapons/electronics engineers, or REME technicians looking to transition into a high-specification, safety-critical engineering environment.\n\nIf you are used to working on complex electronic systems, operating to strict procedures, and delivering under pressure this is a natural next step.\n\nThe Role\n\nYou will be responsible for the installation, commissioning, servicing and fault diagnosis of specialist medical systems used in clinical environments.\n\nThis is a front-line technical role customer-facing, autonomous, and requiring the highest professional standards.\n\nYou will represent the company on-site, often working independently, applying structured fault-finding skills and disciplined engineering practice developed through military service as well as full training by the client on their equipment\n\nWhat You’ll Be Doing\n\n- Lead installations and service tasks on specialist medical systems\n\n- Conduct commissioning, maintenance and fault diagnosis\n\n- Work in regulated, safety-critical environments\n\n- Liaise professionally with clinical teams, contractors and site engineers\n\n- Complete service documentation accurately and to standard\n\n- Ensure full compliance with health & safety and regulatory requirements\n\n- Maintain company tools, equipment and assets\n\n- Support wider operational teams when required\n\n- Continue professional development through structured training\n\nThis role would particularly suit:\n\n- Royal Signals Communication Systems Engineers\n\n- RAF Avionics or Ground Systems Engineers\n\n- Royal Navy Weapons / Electronics Technicians\n\n- REME Electronics Technicians\n\n- Submarine or Aircraft Engineering Technicians\n\n- Any military engineer with strong electronics and systems experience\n\nWhat You’ll Bring\n\nEssential:\n\n- Level 3 engineering qualification (or equivalent military trade qualification)\n\n- Strong electronics / communications systems background\n\n- Proven fault-finding and diagnostic ability\n\n- Experience working in structured, procedural environments\n\n- Ability to operate independently and manage your own workload\n\n- Full UK driving licence\n\n- Willingness to travel across the UK and internationally, as there will be about 40% travel in this role.\n\nHighly Desirable:\n\n- Experience with radiation-based or regulated equipment\n\n- Experience in safety-critical environments\n\n- Knowledge of networking / connectivity systems\n\n- Exposure to medical or clinical environments\n\nYou will need these Key Attributes\n\n- Calm under pressure\n\n- Methodical and detail-focused\n\n- Professional and customer-facing\n\n- Self-motivated and disciplined\n\n- Strong communicator\n\n- High personal standards\n\nWhy This Role Could Suit YOU\n\nYou’ll be moving from maintaining operational capability to supporting life-saving clinical capability.\n\nThe environment demands:\n\n- Procedural compliance\n\n- Precision engineering\n\n- Accountability\n\n- Professional representation\n\n- Independent decision-making\n\nAs all of the above strengths embedded in military training.\n\nYou will receive structured product training and ongoing technical development to support your transition into the medical engineering sector and they want the individual to be in place by June 2026\n\nIn return they are offering an excellent starting salary of up to £40k, with company pension, 28 days holiday + bank holidays and they are looking to add more benefits at the moment, all accommodation and travel costs will also be covered by the company when required.\n\nFor more information, please contact Jean-Claude Hedouin at Ex-Mil Recruitment Ltd on (phone number removed)

Ready to find the right role for you?\n\nSalary: up to £48,500 per annum plus Veolia benefits\n\nHours: 43 hours per week, Mon - Fri 8.30am to 4.30pm , with a 1 in 3 weekend callout rota\n\nLocation: Mobile across West Midlands\n\nWhen you see the world as we do, you see the chance to help the world take better care of its resources and help it become a better place for everyone.\n\nWe're looking for a qualified candidate to carry out PPM maintenance regime, fault finding and repairs on large industrial utility plant, de-commissioning and re-commissioning (electrical & Mechanical) on a wide range of Plant including (Steam and Hot Water Boilers, ASHP, Compressed Air Systems and Water Treatment plant), BMS systems including Trend, PLC, Scada & Iconics Platforms.\n\nThe role will be working within a close team where they will be Veolia's lead on site and key is to deliver excellent customer focus and service delivery. The role will also be our key front facing Customer Contact on a daily basis and be able to liaise with the client for service deliverables.\n\nThe role will require a flexible approach ensuring that the service delivery to our clients is met at all times which in turn means holidays are covered within a fixed rota, which will be determined by clients operational requirements.\n\nWhat we can offer you:\n\n25 days of annual leave \n \nRefer an Engineer to us once you've joined and earn £1000\n \nAccess to our company pension scheme\n \nFree physiotherapy and 24/7 GP service \n \nDiscounts on everything from groceries to well known retailers\n \nAccess to a range of resources to support your physical, mental, and financial health\n \nOngoing training and development opportunities, allowing you to reach your full potential \n\nWhat you'll be doing:\n\nCarry out duties in accordance with the Veolia Health and Safety manual and Company Operating Procedures and work to the values of the company mission and vision statements.\n \nTo write Permit to Works and Carryout Isolation's on equipment for you and contractors\n \nTo ensure and maintain a superior level of aesthetics and housekeeping in and around the plant, equipment and buildings\n \nTo safely carry out all Veolia Planned Preventive Maintenance activities ensuring they are all complete with the desired Month / Time Frame which involves the planned preventative maintenance, routine servicing and inspection and commissioning on all mechanical plant, electrical equipment and instrumentation.\n \nTo safely operate and maintain all site main utilities under Veolia's control ensuring 100% service delivery is supplied to the client under contract KPI's\n \nTo work within a close Team on a 1 in 4 call out / weekend working Rota covering the sites 24/7\n \nInteract with our Clients on a Daily basis to meet their needs and deliver excellent customer service delivery.\n \nInterface with the site's Computerised Maintenance Management System in accordance with company operating procedures.\n \nProvide assistance to contractors working on site.\n \nWork in any area within his/her competence under the direction of the Operations supervisor.\n\nWhat we're looking for:\n\nQualified to C&G level in Electrical Maintenance \n \nHV Electrically qualified as AP (Training can be given)\n \nProven ability to fault find on PLC and control systems\n \nMust be able to form part of a small team and be willing to coach and assist other team members\n \nBe pro-active and self-managing and to exercise individual core technical skills effectively, flexibly to a high personal standard of workmanship.\n \nTo maintain a high standard of housekeeping\n \nSelf motivating and a strong team player with a can do attitude prepared to go the extra mile\n \nProven ability to fault find and problem solve both electrically and mechanically\n \nExcellent communications skills (written, telephone manner/verbal/face to face).\n \nAble to understand and act on both verbal and written instructions/procedures\n \nSeeks out and takes opportunities to learn new skills\n \nGood PC skills \n \nFull Driving licenceWhat's next?\n\nApply today, so we can make a difference for generations to come.\n\nWe're proud to have been named as one of The Sunday Times Best Places to Work for three consecutive years in 2023, 2024 and 2025. This consistent recognition reflects our commitment to our people, demonstrating that Veolia is not just transforming the environment, we're also transforming what it means to have a rewarding, purposeful career. \n\nWe're dedicated to supporting you throughout your application journey, offering adjustments where reasonable and appropriate. As a proud Disability Confident Employer, we will offer an interview to applicants with a disability or long-term condition who opt-in to the Disability Confident scheme, and meet the minimum criteria for our roles. \n\nWe're also committed to ensuring that all applicants and colleagues receive fair treatment without discrimination on any grounds, aiming to create a diverse and inclusive workplace where everyone can thrive

We are currently recruiting for a Project Manager to join our clients industrial cooling division, delivering large-scale refrigeration and cooling projects across sectors including food manufacturing, data centres, and distribution facilities.\n\nWe can consider various locations for this position.\n\nThis role is ideal for a technically strong, commercially aware Project Manager with experience delivering major industrial installations. You will lead projects from initial concept and design through to commissioning and handover, ensuring the safe, efficient, and successful delivery of bespoke cooling solutions using advanced technologies and natural refrigerants such as Ammonia (NH₃) and CO₂.\n\nYou will be responsible for overseeing complex project lifecycles, managing multidisciplinary teams, and maintaining strong communication with internal stakeholders and key clients. This is a fantastic opportunity to join a specialist division delivering high-value industrial refrigeration solutions across the UK.\n\nKey Responsibilities\n\nProject Planning & Delivery\n\n \n\n Develop and execute robust project plans in line with client requirements and industry best practice.\n\n \n\n Work closely with Service Managers to support the delivery of service-related project works.\n\n \n\n Define project scope, objectives, deliverables, and key milestones for large-scale refrigeration installations.\n\n \n\n Coordinate specialist personnel, heavy plant, and extensive material and equipment requirements.\n\n \n\n Track progress across multi-phase projects, managing risks and resolving issues promptly.\n\n \n\n Drive safe working practices throughout all stages of project delivery.\n\nTeam Leadership & Collaboration\n\n \n\n Lead and motivate multidisciplinary teams across engineering, design, installation, and commissioning.\n\n \n\n Manage subcontractor performance and ensure effective integration with internal teams.\n\n \n\n Champion continuous improvement, knowledge sharing, and accountability.\n\n \n\n Hold regular coordination meetings for teams working on major industrial installations.\n\nCommercial & Financial Management\n\n \n\n Monitor financial performance and ensure strong cost control throughout the project lifecycle.\n\n \n\n Work closely with commercial and finance teams on invoicing, reporting, and contractual compliance.\n\n \n\n Manage substantial project budgets and support financial governance on high-value contracts.\n\nQuality, Safety & Compliance\n\n \n\n Maintain strict quality standards and ensure all outputs meet regulatory, compliance, and client expectations.\n\n \n\n Promote adherence to all health, safety, and environmental requirements, particularly for ammonia and CO₂ refrigeration systems.\n\nClient Engagement & Relationship Management\n\n \n\n Act as the primary point of contact for clients, providing clear and consistent communication.\n\n \n\n Proactively manage client expectations, resolving issues swiftly to ensure satisfaction.\n\n \n\n Support business growth by identifying opportunities for repeat work and future project partnerships.\n\nRequirements\n\n \n\n Degree in Engineering or related technical discipline (advanced qualifications beneficial).\n\n \n\n Proven experience leading large-scale industrial refrigeration projects, ideally including ammonia or large CO₂ systems.\n\n \n\n Strong technical understanding of refrigeration, HVAC, and industrial cooling technologies.\n\n \n\n Demonstrable project management expertise including planning, risk management, resource allocation, and financial oversight.\n\n \n\n Excellent leadership, communication, and stakeholder-management skills.\n\n \n\n Proficiency with project management tools and reporting software.\n\n * \n\n Strong knowledge of health, safety, and environmental regulations relating to industrial refrigeration

Contact the Service Team at Premier Technical Recruitment on or email your cv in confidence to.

About The Role Right across infrastructure, theres a requirement to not only maintain, but also renew and reimagine. Whatever stage youre at in your career, with us youll have an opportunity to grow and develop. Delivering essential infrastructure services for life, while being safety first, and client and customer centric in a?friendly, fun and respectful environment where you are encouraged to thrive. Where will you be working? Aviation- Our Aviation team works across a wide range of specialist civil, mechanical and electrical engineering works including major international airports, regional airports and RAF airfields. Want to come and be a part of it? What will you be doing? Key Responsibilities • Supervise and coordinate electrical installation, maintenance, and commissioning works on site, • Lead, manage, and supportour AGL technicians and traineesto ensure works are completed safely and efficiently, • Ensure all electrical works comply with current regulations, standards (e.g. BS 7671), and company procedures, • Liaise with site manager to plan daily activities, • Conduct site inspections and quality checks to ensure workmanship meets required standards, • Enforce health, safety, and environmental requirements and lead by example on site, • Identify and resolve technical issues or installation challenges on si...

Installation Engineer – Industrial Emissions Systems, £40,000 -£47,000 | Leicestershire Office with UK Travel £40k–£47k + overtime at time & a third 40 hours per week, no weekend working Field-based role – approx. 70–80% UK travel / time away from home Industrial emissions systems (SCR) for marine & industrial applications We are recruiting an Installation Engineer for a specialist engineering business in Leicestershire, working on emissions control systems. This is a hands-on field installation role, working on industrial sites across the UK, installing complete emissions systems used on generators, engines and heavy plant. What you’ll be doing Installing cable tray, unistrut and containment systems Running and terminating 24V DC control and instrumentation cabling Installing AdBlue pipework (tank to injector systems) Mechanical installation of SCR units, panels and tanks Supporting commissioning, snagging and fault finding Occasional workshop build and preparation work What we’re looking for Background in electrical installation, mechanical fitting or field service engineering Experience working on industrial plant, machinery or heavy equipment Comfortable with hands-on installation work and site environments Able to read basic engineering drawings / install packs * Happy with regular UK travel and time away from...

Technical Manager- Fire and Gas Systems SME Certain Advantage is hiring for a Technical Manager- Fire and Gas Systems SME based in the Derby area. This role is on a contract basis and is mostly remote. The Company We’re working with an engineering company specialising in solving complex engineering challenges across industries—from aerospace and automotive to healthcare and semiconductors. Does this sound like your next career move? If you’re ambitious to grow, this may be your next role? The Role: This role is for a Technical Manager- Fire and Gas Systems SME—someone ambitious and ready to make an impact. You’ll be results-oriented and driven to succeed. You’ll be leading a small, experienced, and collaborative team, and be responsible for: Requirements validation and specification. Conduct any Risks & Hazards assessment to support design and specifications. Support technical specification and selection of sensors and systems for gaseous fuel detection, oil mist detection and fire detection across. Ensure designs comply with applicable international and regional safety standards and codes (e.g., NFPA, IEC, ISO, ATEX). Oversee installation and commissioning of safety systems. Develop and execute test protocols to validate system performance and compliance.The Individual We’re looking for people who can show: Educational background to a Bachelor’s or Master’s. degree in E...

Field Service Engineer Industrial Emissions Systems, £40,000 -£47,000 | Leicestershire Office with UK Travel • £40k£47k + overtime at time & a third, • 40 hours per week, no weekend working, • Field-based role approx. 7080% UK travel / time away from home, • Core focus on installation, with commissioning and service work forming a smaller part of the position., • Industrial emissions systems (SCR) for marine & industrial applications We are recruiting a Field Service Engineer for a specialist engineering business in Leicestershire, working on emissions control systems. This is a hands-on field installation role, working on industrial sites across the UK, installing complete emissions systems used on generators, engines and heavy plant. What youll be doing • Installing cable tray, unistrut and containment systems, • Running and terminating 24V DC control and instrumentation cabling, • Installing AdBlue pipework (tank to injector systems), • Mechanical installation of SCR units, panels and tanks, • Supporting commissioning, snagging and fault finding, • Occasional workshop build and preparation work What were looking for • Background in electrical installation, mechanical fitting or field service engineering, • Experience working on indus...

BMS Engineers – Support / Service / Senior Engineers – Excellent Package + Career Growth Do you have hands-on experience working on live BMS systems? Can you fault find, service, maintain or commission BMS controls independently? Have you worked with Trend, Tridium, Siemens, Schneider, Honeywell or similar platforms? Are you looking to join a business that genuinely invests in engineers and promotes from within? Would you value a role with variety, autonomy and long-term progression? Take your career to the next level with one of the UK's most respected independent Building Management Systems specialists, delivering service, projects and long-term client partnerships across commercial, critical environment, healthcare, education and industrial sites nationwide. • Proven hands-on experience within Building Management Systems, • Background in service, maintenance, support, commissioning or projects, • Abilit...

Job Responsibilities - Support mechanical engineering projects from concept design through to commissioning - Design components, assemblies, and machinery using SolidWorks or similar CAD software - Produce detailed manufacturing drawings, BOMs, and technical documentation - Develop innovative engin

The Commissioning Manager will oversee commissioning activities for water projects.

Working here isn’t just a job. You can advance your career at Avove, and we’ll reward you with a range of benefits that recognise great work. We provide full training and continuous development to help you reach your potential. We strive to create an inclusive working environment where everyone can be themselves. Join us and take the next step towards a fulfilling career. We understand the impact our work has on our society and the environment. It’s the difference we make that improves people’s lives and helps the economy to grow. We work alongside our customers to deliver resilient, bespoke infrastructure solutions that keep the taps running, the energy flowing and people connected. The work we do together matters. About the role: Due to continued contract growth, we are seeking a Project Engineer to join our delivery team. You will support the design, build, and commissioning phases of projects, working closely with Project and Site Managers to ensure programmes and budgets are met. Location: Due to the nature of the role we are willing to consider applicants from either the East or West Midlands. Salary: £44,000 - £56,000 Depending on experience Company Car or Car allowance Key Responsibilities: Support the Project Manager in managing engineering activities and monitoring progress against the project plan. Ensure correct material specifications, timely procurement, and maintain material schedules. Provide on-site support to resolve engineering issues and support quality and safety support. Assist with procurement, H&S documentation and commissioning procedures. Ensure compliance with statutory legislation, company standards, and HSQE requirements. Prepare project documentation including procurement schedules, RAMS, SWPs, with input into programmes and Forecasting Coordinate with clients and subcontractors on H&S audits and inspections. Support site activities to maintain programme and QA/ITP compliance. Apply basic NEC contract knowledge (time, cost, EWNs) and contribute to quality planning. Skills and Experience: Familiarity of MEICA or Civils projects from a design or delivery background. Process knowledge in Water Treatment and/or Waste Treatment, and process control knowledge. Familiarity of control systems, manual and actuated valves, instrumentation and quality instrumentation. Understanding of hydraulic systems, pumping systems and pressure systems. Proficiency in MS Project for creating detailed programmes and cost build-ups. Good experience in using MS Word, Excel and Project. What’s it in for you: We offer a rewarding salary that is tailored to your skills and experience. But that’s not all! We celebrate hard work and give recognition to our colleagues. In addition to this, we understand that one size doesn’t fit all, so everyone has access to a variety of flexible benefits that work for you. 24 days holiday plus bank holidays Company pension scheme Life assurance A selection of lifestyle benefit options Financial wellbeing programme Employee assistance program for health and wellbeing and onsite mental health first aiders to support our colleagues. We love to give back so we offer you volunteering days in your community and charity matched giving where we will boost your fundraising. Rewards initiative for achieving recognised professional qualifications. About us: We design, build and maintain the UK’s utilities infrastructure to help transform local communities for the better. We provide cutting-edge and sustainable engineering solutions and play a critical role in helping to keep the water running, the lights on and people connected. We are an expert, responsible and agile partner, providing vital services to water and power sectors. We work closely with our clients to help protect and improve their assets, enhance customer experience and protect the natural environment. Everything we do is designed to drive continual improvement and move life forward. We are proud to work in partnership with leading utility providers, including Severn Trent, United Utilities, Yorkshire Water, Northern PowerGrid, Northumbrian Water Group, and Scottish Power Energy Networks. We are an equal opportunities employer: We welcome applications from candidates of all races, genders, disabilities, religions, ages and sexual orientations. We know that having a diverse workforce encourages new perspectives, inspires creativity and creates an engaging workplace and we are committed to creating an inclusive environment where all colleagues can thrive. When it comes to inclusion, we’re making sure we keep up the progress with our Communities of Practice, who help us do just that. What next: We encourage you to apply for this role as soon as you can. We recognise talent waits for no one, so we progress candidates individually through all stages of recruitment process. If you have any questions, please reach out for an informal discussion

Mobile Service Engineer – Air Conditioning Location: Derby & Surrounding Areas Contract: Permanent, 40 hrs/week (8 am–4:30 pm) Package: Up to £50,000, Door2Door, Van (Personal Use) etc - OTE £60,000+ Are you a field-based AC specialist ready for your next challenge? Join a dynamic engineering team delivering first-class service across Derby and the wider region. We have a permanent opportunity for a skilled Mobile Service Engineer to cover scheduled maintenance, rapid breakdown response, and light installations. What You’ll Do Conduct planned PPM visits on air-conditioning, refrigeration, and heat-pump systems Respond to breakdowns and carry out timely repairs Complete small-scale installations and site surveys Assist with tender preparation (materials & labour estimates) Participate in an on-call rota (including occasional out-of-town work) Generate clear, professional daily job reports Advise clients on site and mentor junior engineers Must-Have Qualifications & Experience City & Guilds 2079 F-GAS Categories 1 & 4 City & Guilds Refrigeration, Air Conditioning & Heat Pumps Levels 1 & 2 Proven field experience fault-finding, repairs & PPM on M&E systems Strong knowledge of HVAC controls and basic electrical systems Familiarity with Legionella L8 water testing and emergency-lighting checks Computer literate with a clean driving licence Comfortable working in occupied premises and engaging professionally with the public Desirable Add-Ons C&G Level 3 Electrical Installation, Commissioning & Inspection qualifications 2382-22 IET Wiring Regulations (18th Edition) Emergency lighting to BS 5266 CSCS, PASMA, IPAF or similar site-safety certifications

Express Recruitment is delighted to be working alongside one of the UKs leading manufacturers, specialising in bespoke manufacturing solutions for global utilities providers. As a result of a growing project pipeline, our client is seeking the addition of a Pipe System Installation Engineer to support all major installation of gas and water systems throughout the UK. The successful candidate must hold a Level 2 Diploma (NC02) in Network Construction Operations, Water Main Layering. The contracted hours are Monday to Friday, 8:00am to 4:30pm. There will be some need for out of hours work and occasional overnight stays, which will be paid as overtime. In return, will receive a competitive starting salary of up to c£40,000 plus opportunities for overtime which is paid at an enhanced rate. You will also receive a company van for work user, tools, PPE, phone, fuel card, pension, sick pay and 25 days holiday plus statutory days. Skills & Experience Holder of Level 2 Diploma Networks Construction Operations (NCO2) essential Holder of a NRSWA qualification Holder of SHEA Gas & Water and EUSR Water Hygiene card Proven experience in the installation and commissioning of water and/or gas systems within the Utilities sector Proven site experience including public highways, power plants, telecommunication sites etc. Slinger, Signaller and Banksman qualifications desirable Experience in operating a 360-degree Excavator would be useful Understanding of polyethylene and metallic gas and water systems Full Clean Drivers License essential Roles & Responsibilities Perform a variety of one-off site installations for gas and water pipe systems across a range of UK utility, industrial and sensitive sites Assist with the testing and commissioning of new contractions onto live pipelines Install metallic water and gas line pipe systems Work with a range of irrigation pipe systems Write and review of RAMs Assist in the planning and execution of installation and commissioning projects on behalf of customers, ensuring consistent commitment throughout Resolving on-site technical issues promptly and safely Adhere to strict Health, Safety, Environmental and Water Hygiene standards Work extensively with a range of specialist tools and equipment Work independently from technical assembly and installation diagrams About Express Recruitment Express Recruitment has been offering exceptional recruitment solutions across the East Midlands since 1987, exceeding expectations every time of over 267,000 candidates. We supply a diverse range of sectors including Engineering, Technology, Professional Services, Languages, Sales & Marketing, Call Centres, Commercial, Manufacturing, Local Authority, NHS, Education and Voluntary organisations. Find all of our current vacancies on https://bit.ly/3IaEnI7 Not quite found the right role for you yet? Let us do the scrolling for you! Your search for a new role has never been so easy, just fill in our contact form on https://bit.ly/3NHa9NR or give us a call on 0115 924 0110 and we will do the rest for you. Job Location Derby, Derbyshire Salary c£40,000 per annum D.O.E plus overtime Job Type and Hours Monday-Friday (Full Time), 8am 4:30pm, Permanent TPBN1_UKTJ

Wanted: M&E Manager Salary: £45,348.00 £62,354.00 + Car Allowance + Benefits Do you want to be part of a long-standing team, with deep technical and delivery expertise, where no two days are the same and where possibilities to develop new skills and experiences are around every corner? PDS is passionate about creating a friendly, open, and inclusive working environment where individuals are supported to excel in their area of expertise. We are continually seeking out new ways to improve our business and are firm believers that everyone should enjoy what they do. What we do We are a technically driven business with over 30 years of expertise; engineering and supporting high-integrity control systems where failure simply isnt an option. These can range from small upgrades through to fully integrated turnkey solutions, covering all aspects of technology from control room to field devices. We supply the latest technology to various locations throughout the UK with our prestigious clients predominantly being within Intelligent Transport Systems (ITS), Highways, Airports and Power sectors. If you are a keen problem solver with excellent communication skills, looking for a challenging yet rewarding career with strong technical and commercial accountability, look no further. We have an opportunity for a commercially aware and delivery-focused M&E Manager to join us on our mission to support the successful planning, procurement, and delivery of M&E works across our projects and bids. What we need from you. A well-organised team player with sound technical judgement and strong commercial awareness, who is familiar with electrical infrastructure and electrical principles. You will work as an M&E Manager, holding a qualification in electrical engineering and/or an electrical HND, whilst also having the appropriate skills and experience to fulfil the following duties. Key Responsibilities: Tender/Pre-Construction Stages Co-ordinate and attend site surveys Evaluate M&E supplier proposals for scope completeness, risk, programme, and commercial alignment Support the bid team with pricing strategy, risk allowances, qualifications, and clarifications for M&E scope Project Delivery for M&E Works Support site surveys as required to inform delivery strategy. Produce technical and delivery requirements for supplier quotations and carry out evaluation. Attend design meetings (along with design sub-contractor as required). Provide technical and delivery support to PDS Supervisors and Project Managers. Assist the Project Manager in the planning, execution, and completion of the M&E sub-contract works. Manage suppliers progress and performance, ensuring alignment with project plans. Manage and review the production of supplier designs to ensure alignment with the employers requirements, buildability, interfaces, and delivery risk without assuming design responsibility. Manage M&E Factory Acceptance Tests and review all relevant documentation. Manage the coordination of the designer and installer, which may be different subcontractors. Review RAMS and test documentation for suitability, completeness and alignment with agreed methodologies. Manage site supervisors for M&E works. Manage installation handover, including support for testing, commissioning and documentation close-out Staff & Technical Oversight Provide functional oversight and technical support to commissioning, design and CAD resources, where applicable. Requirements: Required Skills & Experience Electrical Engineering and/or electrical HND qualification with proven experience. Strong understanding of electrical infrastructure and multi-discipline M&E systems. Excellent IT competency Excel and Word mandatory Strong supplier and client management skills. Demonstrable experience supporting bids or pre-construction activities Ability to identify and clearly communicate technical and commercial risk Ability to work under pressure and to tight deadlines. Flexibility and adaptability to juggle multiple priorities Full UK Manual Driving License Candidates must be legally permitted to work in the Republic of Ireland without restriction. The company does not offer sponsorship for this role. There is plenty of room for growth and progression, which is proven by most of the management team beginning their career with us as students. What we offer in return. In addition to your salary, you can expect to receive some other great benefits too. 33 floating holidays. Company performance-related bonus. Wellbeing benefit. Pension scheme. Life insurance and Health benefits. Salary sacrifice schemes Tech, Cycles, and EV. Subsidised on-site charging for EVs. Anniversary celebrations. Social events. Hybrid working Hours. Flexible working. So why not join us? CVs, covering letters, questions, and everything in-between by using the apply button provided TPBN1_UKTJ

Provide installation, re-assembly, start up, commissioning, IQOQ, cycle development, novel project works and breakdown support in line with contractual commitments and to a standard consistent with the high quality of the equipment and services our client supply, representing the company in a profes

Depending on project needs, you may be deployed as a Process Commissioning Engineer, Commissioning Team Leader:. Manage and coordinate commissioning teams and contractors across complex, multi-disciplinary projects. Produce detailed commissioning reports and weekly project updates.

Completion of Commissioning Inspections, off load commissioning and on load commissioning as identified under the relevant DNO/IDNO Procedures. To act as Commissioning Engineer undertaking commissioning activities / duties on a wide range of distribution power system plant, control and protection an

A leading clean energy infrastructure business is seeking an experienced Head of Commissioning to lead commissioning strategy and delivery across a growing portfolio of grid-scale battery energy storage systems (BESS), EV charging infrastructure and renewable power assets. Track commissioning progre

Previous experience as a Commissioning Engineer on energy, power generation, substation, HV, grid or industrial projects. The successful candidate will be involved in the commissioning, testing, energisation and handover of electrical and mechanical systems associated with a large rotating plant and

We’re looking for an experienced Commissioning Engineer to take ownership of the commissioning process for utility-scale solar projects. Manage commissioning plans, schedules, and documentation to ensure full compliance with project and regulatory requirements. Verify the correct operation of SCAD