Electrical design jobs in LiverpoolCreate job alerts

Commissioning Engineer Widnes Based - Covering North Wales, Merseyside and Cheshire Permanent Competitive + Commercial vehicle + Flexible Benefits Summary Freedom Group are currently looking for a Commissioning Engineer to assist us with our SPEN Substation Electrical framework working on substations from LV to 132kV. Reporting to the project managers, you will ensure that a planned, programmed, auditable and structured approach to the commissioning process is carried out to the highest standards, making sure the installed switchgear, transformers, relays, and protection schemes operate in accordance with the design intent. Some of the key deliverables in this role will include: • Supervise onsite commissioning activities to ensure safe, compliant, and accurate testing is achieved., • Write and Review Commissioning procedures and Safe System of Work for suitability of the activity., • Prepare and Submit Commissioning Documentation for presentation to the Testing & Commissioning Panel for review and approval, • Ability to spot dangerous occurrences before they happen and implement control measures., • Plan onsite commissioning activities including having an approved commissioning procedure, an approved Safe System of Work and co-ordination with other working parties including attending site planning meetings., • Ensure all required test equipment is available and within date calibration records., • Ensure the initial state of plant is as expected in the commissioning document., • Successfully deliver pre-start briefing to entire working party including client witnesses for the commissioning with all parties fully understand the testing requirements and their individual roles to achieve a safe and compliant commissioning activity., • Achieve a safe and compliant commissioning activity., • Ensure the commissioning documents and safe system of work is followed by all involved in the activity., • Witness and close out commissioning activities through to gaining client acceptance, • Report to project managers immediately when plant does not operate as expected or defects are found during the commissioning stage., • Forward thinking approach with a can-do attitude., • Plan and arrange commissioning activities in accordance with the project programme., • Liaise with the project managers or representatives, • Experience in the commissioning of Electrical switchgear and protection systems from 11,000 to 132,000 volts from manufacturers such as Schneider, Siemens, Ormazabal, Kolektor, Brush etc, • Experience working on SPEN DNO equipment and protection schemes, • HNC qualification, • In date SPEN authorisations We're always evolving our benefits to ensure we're attracting and retaining great people. Some of what you can expect includes: • Company commercial vehicle, • Salary sacrifice car scheme (Hybrid/Electric Vehicle), • Pension with a leading provider and up to 8% employer contribution, • 25 days holiday plus bank holidays, • Personal Wellbeing and Volunteer Days, • Private Medical Insurance, • Free 24/7 365 Employee Assistance Program to support mental health and well-being (including counselling sessions and legal advice), • Flexible benefits to suit from Dental Insurance, Gym Memberships, Give As You Earn, Travel Insurance, Tax Free Bikes. Next Steps As a business, we’re on a journey to build on our culture where everyone is included, treated fairly and with respect. This starts with recruitment and how we bring people into the organisation. We’ll do our best to outline the recruitment process to you ahead of time with plenty of notice. If you require any accommodations to participate in the application or interview process, please let us know and we will work with you to ensure your needs are met. About Us Freedom are part of the NG Bailey Group, one of the leading independent engineering and services businesses in the UK. Founded in 1921, with a turnover of £500m and 3000 employees, we are proud of our history of developing great people through our investment in training. You will be working as part of a team where we are committed to creating a culture where we treat each other fairly and with respect, recognising everyone as an individual. Progression is something we value and we will make sure that when you join us you have a clearly defined development path, supported by regular reviews, training and ongoing support to enable you to be the best you can be. #LI-RC1 #Freedom #LI-remote

We're looking for a Principal Electrical or Mechanical Engineering Team Leader to join our MEP team based in Liverpool, Manchester, or Leeds. \n \n Location: Liverpool, Manchester, or Leeds - with opportunity for agile working Hours: 40 hours per week - some flexibility on hours available if desired, just let us know when you speak to us. \n Salary: Starting from £70,000 per annum \n Sector: MEP – across a variety of industry sectors \n We are unable to offer certificates of sponsorship to any candidates in this role. \n \n The role involves leading the design and delivery of complex M&E building services projects within a variety of sectors. As a Chartered Engineer and Design Team Leader, you will manage MEP teams, coordinate with multi-disciplinary design teams, ensure technical excellence and compliance, and work closely with project teams and clients for a major main contractor. The position requires strong leadership, significant industry experience, and the ability to deliver safe, efficient, and innovative engineering solutions from concept through construction. \n Are you… \n\n • A Chartered Engineer and member of CIBSE or IET?\n, • A Design Team Leader with strong M&E experience?\n, • A Design Team Leader looking to take the next step for a Main Contractor with a secured workload in a variety of industry sectors?\n, • Hold a Degree in Mechanical or Electrical Building Services Design Engineering or related subject?\n, • Bring experience of working across both public and private sector projects?\n, • Lead the design delivery of high‑quality M&E designs across new build, refurbishment, and minor works projects, ensuring outputs meet programme, budget, quality, and safety standards\n, • Support the Head of Service in leading and managing the M&E design teams, working closely with project leads to deliver coordinated multi‑disciplinary design solutions\n, • Manage team performance, utilisation, and development, ensuring capability aligns with workload and business targets\n, • Oversee technical delivery including feasibility studies, multi‑stage designs, specifications, condition reports, and technical advice\n, • Maintain and apply engineering standards, QA procedures, document control, and Health & Safety policies\n, • Build and maintain strong client relationships across public and private sector projects, ensuring high levels of customer satisfaction\n, • Contribute to business development, including compiling fee proposals, quality submissions, bids, presentations, and winning new work\n, • Provide senior technical leadership and ensure integrated design solutions through to completion\n, • Promote continuous improvement, innovation, and best practice across the M&E service.\n, • Represent Kier within relevant industry sectors, contributing to forums, working groups, and industry engagement\n, • Drive standards, innovation, best practice, safety, wellbeing and customer satisfaction\n, • Chartered Engineer (CIBSE or IET) with a degree in Mechanical or Electrical Building Services Engineering design or similar subject\n, • Proven senior leadership experience managing multi‑disciplinary engineering teams\n, • Strong communicator able to translate complex technical information clearly\n, • Experienced in quality management and design governance\n, • Fluent in use of industry related software and calculation methods\n

Lead EC&I EngineerLocation: Remote UK-wide travel Salary: £65,000 - £75,000 per annum plus Car Allowance We’re recruiting on behalf of a fast-growing industrial energy solutions provider for a Lead EC&I Engineer. The business delivers complex projects across CHP, heat recovery, heat pumps and wider process-integration technologies within live manufacturing environments.You’ll work across the full project lifecycle—reviewing designs, shaping control philosophies, supporting commissioning on site and providing ongoing technical input. This role suits a practical engineer who enjoys variety and hands-on problem-solving.Key Responsibilities • Develop and review EC&I specifications, control philosophies and FDS documents., • Review third-party EC&I designs and provide technical challenge., • Support tender documentation and instrumentation/control strategy development., • Provide EC&I support during installation, commissioning and early operation., • Troubleshoot, test and validate control logic on site., • Contribute to design reviews, HAZOPs and supplier evaluations., • Support lifecycle activities including optimisation, maintenance strategies and data capture. Skills & ExperienceEssential:, • Background in electrical, control systems or instrumentation engineering., • Experience with industrial control systems in manufacturing, process or energy settings., • Ability to review and assess third-party designs., • Understanding of control philosophies and FDS., • Commissioning or troubleshooting experience., • Strong communication skills and comfortable on site., • Full UK driving licence and willingness to travel.Desirable:, • Experience in energy generation or industrial infrastructure., • Exposure to CHP, heat recovery, solar PV or heat pumps., • HAZOP or design review experience., • Understanding of industrial data capture/monitoring systems. For further information please contact Paige Bevan on or email

Your new companyReporting to the Head of Estates, you will play a key leadership role in safeguarding the health, safety and wellbeing of all building users across the estate. You will be responsible for the effective delivery of reactive maintenance and statutory compliance activities, ensuring all works are completed to the highest standards and within required timeframes. You will also oversee the timely production and accuracy of maintenance reports, and ensure that all Planned Preventative Maintenance is scheduled, monitored and delivered in line with organisational, legal and industry requirements. Through proactive management and a strong focus on service quality, you will help maintain safe, secure and well-maintained environments across all sites. You will be based in Liverpool, managing a team of 5 staff and a portfolio of 22 buildings across the wider Liverpool region. Your new role-Ensure statutory compliance and Health & Safety standards. Maintain safe systems of work, oversee compliance with CDM 2015 regulations, and act as the responsible person for statutory schemes (e.g. asbestos, legionella).-Manage estate maintenance and repairs. Oversee planned and reactive maintenance programs, ensuring quality standards, timely delivery, and adherence to financial regulations.-Coordinate contractors and Facilities Management partners. Manage external contractors and Facilities Management partners, monitor performance against SLAs, and ensure safe execution of works.-Monitor building condition and infrastructure. Maintain accurate estate drawings and condition records, oversee inspections of building fabric and mechanical and electrical systems, and safeguard environmental standards for collections.-Lead compliance reporting and documentation Produce reports on maintenance progress, statutory compliance, and energy consumption, in line with government requirements.-Support capital projects and estate development. Contribute to design, delivery, and handover of major projects, advise on building extensions and conversions, and participate in a Soft Landings approach.-Manage budgets and resource allocation Control allocates budgets for repairs and maintenance, distribute work within the team, and ensure efficient use of resources.-Provide leadership and customer-focused service Oversee Estates help desk operations, participate in performance reviews, and ensure team training in Health & Safety and project management.What you'll need to succeed- You will have good hard services experience.- Good compliance experience and knowledge- Ideally plant room experience- Good leadership and management experience- Able to manage mufti sites- It would be advantageous if you have worked on listed buildings or in conservationWhat you'll get in return- £43000 salary- 38 days holiday including bank holidays- 35 hour week-Civil Service Pension Scheme-35% staff discount in all Cafés-25% staff discount in all Shops-Employee Assistance Programme-Employee Benefits Portal: High Street discounts, retailer discounts, locally negotiated discounts, Cycle to Work Scheme, Travel Loan Scheme, Eyecare Scheme, Smart Pay SchemeWhat you need to do nowIf you're interested in this role, click 'apply now' to forward an up-to-date copy of your CV, or call us now.If this job isn't quite right for you but you are looking for a new position, please contact us for a confidential discussion about your career. Hays Specialist Recruitment Limited acts as an employment agency for permanent recruitment and employment business for the supply of temporary workers. By applying for this job you accept the T&C's, Privacy Policy and Disclaimers which can be found at hays.co.uk

Junior Project Engineer \n\nLiverpool \n\n£30,000 - £45,000 Basic + Training & Development + WFH ( 2 days in 3 days from home) + Progression + Holidays + Travel Paid + Package + MORE!\n\nUpgrade your career with one of the UK's biggest companies in their industry where you will have the opportunity to work on large projects as well as receive ongoing training and development. As Junior Project Engineer you'll be undertaking electrical and mechanical design reviews for various projects, and you'll benefit from having the opportunity to progress rapidly in a growing company. \n\nAs well as on shore this company operates off shore in the manufacturing industry in the UK and is currently looking to expand further their reach globally. Due to their consistent growth, they require a Junior Project Engineer to come and join their crucial team, helping to add value to their projects. Apply now and solidify a career where you will be offered continuous hands on training and progression. \n\nYour Role As Junior Project Engineer Will Include:\n\n* Ensuring technical reviews are undertaken for assigned opportunities \n* Working closely with project managers on various projects \n* Visiting client sites across the UK \n\nThe Successful Junior Project Engineer Will Have:\n\n* Some understanding of Switchgear \n* Electrical engineering background \n* Willing to visit sites across the UK \n* Commutable to Liverpool \n\nFor immediate consideration please call Matthew on (phone number removed) or click to apply\n\nKeywords: Junior Applications Engineer, Project Engineer, Application engineer, Junior Project Engineer, Switchgear engineer, Electrical, project manager, Field service, Trainee, Electro mechanical, commercial, Liverpool, Merseyside, Warrington, Chester, Birkenhead, Wrexham

ABOUT MJ QUINN MJ Quinn is a UK-based infrastructure services provider specialising in delivering comprehensive, end-to-end solutions across a range of industries, including telecommunications, utilities, and mechanical and electrical engineering. Guided by a commitment to quality, innovation, and sustainability, we offer tailored services encompassing design, installation, maintenance, and project management. Partnering with leading organisations, we successfully execute complex projects by leveraging advanced technology and the expertise of our skilled workforce. Our customer-centric approach ensures efficient, reliable service delivery while maintaining our focus on building long-term, sustainable solutions. At MJ Quinn, our purpose is to play a vital role in maintaining and enhancing critical infrastructure, connecting and supporting communities and businesses across the UK. Our Core Values • People-Focused: We prioritise the well-being, growth, and success of our team and partners., • Safety Always Matters: We are unwavering in our commitment to ensuring a safe environment for all., • Operational Excellence: We strive for the highest standards of quality, efficiency, and continuous improvement. DEPARTMENT OVERVIEW MJ Quinn Energy and Critical Infrastructure division is a multi-disciplined integrated service provider headquartered in Liverpool. Specialising in the design, installation, and maintenance of mechanical and electrical systems, our expertise includes energy-efficient solutions like LED lighting, adiabatic and CRAC cooling units, air source heating, solar PV systems, and battery storage. About The Role. The role of the Senior Mechanical Estimator will be to manage the estimating processes for mechanical installations, producing high quality, commercially viable work winning tenders on multi-million-pound projects. Responsibilities · To prepare and collate tenders and source pre-project information. · Provide accurate, competitive, and profitable estimates from enquires stage to bid submission. · Liaising with clients to gather requirements. · Researching materials, equipment, and labour costs. · Negotiate on behalf of the company to financial close. · Deal with clients at post tender meetings and conduct presentations. · Provide support and assistance to the estimating team. Person Specification · Hold a recognised professional qualification. · Substantial experience in a similar role with works from 10k to 10M. · Proficient in estimation software and tools. · Excellent understanding of mechanical systems and construction processes. · Be adaptable and flexible in your approach to work. · Holding or capable of being accredited to enhanced DBS prior to start date. · A legal right to work in the UK. Benefits • Free Parking, • £5,000 Car Allowance, • 33 days holiday, • Employee Bonus Scheme, • Healthcare Cashback Plan, • Employee Assistance Programme, • Cycle to Work Scheme, • Company Contribution Pension Scheme, • Parental Leave and Pay, • Learning and Development Opportunities, • Gym & Retail Discounts. DIVERSITY STATEMENT MJ Quinn is committed to promoting an environment that values diversity. All staff are responsible for ensuring that all employees, customers, suppliers, and visitors are treated equally and fairly and not discriminated against on the grounds of age, disability, gender reassignment, marriage & civil partnerships, pregnancy & Maternity, race, religion or belief, sex, or sexual orientation. MJ Quinn welcomes applications from a diverse range of candidates regardless of their background, disability or gender and is committed to creating a workforce as diverse as the communities we serve. SUSTAINABILTY MJ Quinn is committed to, and is investing in, a sustainable future as this is vital for the planet, our communities, customers, and business. Our sustainability goals are shaped in accordance with wider business objectives and the core foundations of sustainable development. We have a strong history of engaging with our people and we view sustainability no differently. For MJ Quinn this means creating space for proactive participation in the discussions that shape our sustainability aspirations, learning opportunities at all levels, and harnessing employee passion. Join us in this exciting opportunity where your expertise will contribute significantly to our project's success!

Job Title: C & I Technician Company: Flogas Britain Salary: £42,250.00 + Van + Tools + Enhanced Overtime & Night Out Allowance Location: GB, L34 9EU Contract Type: Permanent Location Type: Hybrid Join us as at Flogas and we’ll do right by you with training, support, benefits, and lots of opportunities to develop in our 1,350 strong team. Flogas is powered by people who want to do energy right by customers in homes and businesses all across the country. From Drivers to Technicians, Customer Experience experts to Site Managers, Engineers to Electricians, we come together as a team of experts, to do more for our customers How you’ll power our business as an EC&I Technician As an EC&I Technician, you will support the installation, maintenance, testing, and fault-finding of electrical, control, and instrumentation systems while developing the technical skills and hands-on experience needed to work independently across a range of industrial environments. Travel requirements around the UK are part of this role and candidates must be flexible to accommodate this. Here at Flogas, we may have a fossil fuels background, but we’re working towards delivering 100% renewable energy to our customers by 2040. We’re already supporting our customers to reduce their carbon emissions, by helping them make the switch from oil to gas. We’re also developing our offering for technologies such as heat pumps and solar panels, beginning to help our customers reduce their energy consumption and evolving new bio-fuels and renewable gases. All of which means job security, and opportunities to get involved in exciting new initiatives. Join Flogas and help us do energy right for the future. What we’ll need from you • Basic understanding of PLC functioning, • Basic understanding of installation and commissioning of Hazardous Area Electrical systems., • Understanding of instrument calibration, Inspection and Testing of a wide range of instrumentation: Pressure, level, flow, temperature (Analogue & Digital), • Basic understanding of engineering documentation (Functional Design Specification (FDS), User Requirements Specification (URS), • Experience on IT literacy, particularly Microsoft Excel & Office., • Committed, persuasive and personable with fluent written and verbal communication skills, • Good fault finding and problem-solving skills What you’ll get from us You matter. And at Flogas, we’ll do right by you with all the benefits, support, and training you need to thrive. • Discretionary Bonus, • Enhanced Pension Scheme, • Life Assurance, • EAP (Employee Assistant Plan), • Health plans, wellbeing support, free flu jabs and Eye Care Vouchers, • Extensive discounts from loved brands and major retailers, • 25 holidays + bank holidays with 1 additional volunteering day. *pro-rated based on contracted hours, • Enhanced Family Friendly Leave Flogas: Powered by people At Flogas, we do energy right by hundreds of thousands of customers across Britain who live, work, relax or holiday off-grid. Powered by people like you, we connect them to the energy they need, when and where they need it. With the backing of the global Group DCC, we’ve grown over the last 35 years to become one of the largest suppliers of Liquid Petroleum Gas (LPG) in the country. Now we’re investing heavily in new infrastructure and innovations, so we can deliver 100% renewable energy to our customers by 2040 – and a career with a bright future to you. Doing right by everyone People matter at Flogas. We’re an equal opportunities employer and we welcome applications from all regardless of age, disability, gender identity or gender reassignment, marital or civil partnership status, pregnancy or maternity, race (which includes race, colour, nationality, ethnic or national origin and caste) religion or belief, sex, sexual orientation or educational background. We’re committed to doing right by our people, so we all feel engaged, motivated and proud to work for Flogas.

• Senior Mechanical Design Engineer, • Mechanical design for pure engineering company, • SolidWorks based projects, • £48k - £58k salary & 25 day holiday, bonus, healthcare & career progression Design – the key to all engineering. The brains behind any new product, making our lives better and more efficient. But evolving your skillset and work on cool projects can be tricky to find… So how does coming in to a company who are hugely established and UK leaders in their engineering field sound? A company where you can use your already impressive design skills and continue learning and evolving. It’s all about you: We are looking for someone who has a strong design background, but who wants to continue their journey in a senior capacity. We have an established design team all over the UK and Europe, but need some mechanical expertise. You’ll be using SolidWorks on our design projects, so some good knowledge of that would be lovely. The role itself: Whilst we have a range of different products, we are always looking to bring new ones out whilst making our legacy products better. To do so, we need a sharp design team, that’s where you come in. You will be running the mechanical design, working closely with the electrical designers for a range of different projects. What next? Sound like an opportunity that appeals? Simply hit apply and we can run through in further details. Look forward to hearing your story…

Estates Manager - Client side - £43000 plus package - Liverpool-based Your new company Reporting to the Head of Estates, you will play a key leadership role in safeguarding the health, safety and wellbeing of all building users across the estate. You will be responsible for the effective delivery of reactive maintenance and statutory compliance activities, ensuring all works are completed to the highest standards and within required timeframes. You will also oversee the timely production and accuracy of maintenance reports, and ensure that all Planned Preventative Maintenance is scheduled, monitored and delivered in line with organisational, legal and industry requirements. Through proactive management and a strong focus on service quality, you will help maintain safe, secure and well-maintained environments across all sites. You will be based in Liverpool, managing a team of 5 staff and a portfolio of 22 buildings across the wider Liverpool region. Your new role -Ensure statutory compliance and Health & Safety standards. Maintain safe systems of work, oversee compliance with CDM 2015 regulations, and act as the responsible person for statutory schemes (e.g. asbestos, legionella). -Manage estate maintenance and repairs. Oversee planned and reactive maintenance programs, ensuring quality standards, timely delivery, and adherence to financial regulations. -Coordinate contractors and Facilities Management partners. Manage external contractors and Facilities Management partners, monitor performance against SLAs, and ensure safe execution of works. -Monitor building condition and infrastructure. Maintain accurate estate drawings and condition records, oversee inspections of building fabric and mechanical and electrical systems, and safeguard environmental standards for collections. -Lead compliance reporting and documentation Produce reports on maintenance progress, statutory compliance, and energy consumption, in line with government requirements. -Support capital projects and estate development. Contribute to design, delivery, and handover of major projects, advise on building extensions and conversions, and participate in a Soft Landings approach. -Manage budgets and resource allocation Control allocates budgets for repairs and maintenance, distribute work within the team, and ensure efficient use of resources. -Provide leadership and customer-focused service Oversee Estates help desk operations, participate in performance reviews, and ensure team training in Health & Safety and project management. What you'll need to succeed • You will have good hard services experience., • Good compliance experience and knowledge, • Ideally plant room experience, • Good leadership and management experience, • Able to manage mufti sites, • It would be advantageous if you have worked on listed buildings or in conservation What you'll get in return • £43000 salary, • 38 days holiday including bank holidays What you need to do now If you're interested in this role, click 'apply now' to forward an up-to-date copy of your CV, or call us now. If this job isn't quite right for you but you are looking for a new position, please contact us for a confidential discussion about your career. # 4772918

DEPARTMENT OVERVIEW The Recruitment Department plays a vital role in attracting, selecting, and retaining top talent to drive organisational success. Our primary focus is ensuring that the workforce possesses the right skills, experience, and capabilities to meet both immediate and future business needs. Through strategic workforce planning and data-driven decision-making, we identify skill gaps and develop resourcing strategies that align with organisational goals. We utilise a variety of recruitment methods, including internal promotions, external hiring, and talent pipelines, to secure the best candidates for each role. Beyond filling vacancies, we contribute to long-term workforce development by enhancing employer branding, fostering diversity and inclusion, and optimising recruitment processes for efficiency and effectiveness. Our commitment to talent acquisition supports the organisation’s growth, innovation, and sustained performance JOB OBJECTIVE The Recruiter plays a key role in supporting the end‑to‑end engagement of sub‑contractor workers, ensuring a structured, compliant, and efficient recruitment and onboarding process. The role involves coordinating resourcing activity across multiple workstreams, liaising with hiring managers, sub‑contractors, agencies, and internal stakeholders to support timely and effective engagement. The Recruiter will manage candidate communications, documentation, and system updates to ensure all engagements are accurately recorded and compliant. Key objectives include scheduling interviews, supporting sourcing activity, maintaining recruitment and compliance records, and assisting with screening processes appropriate to sub‑contractor engagement. The role also contributes to process improvement, supply chain management, and employer brand positioning within the contractor market. Through strong administrative and operational support, this role enables the business to secure capable and compliant resource solutions aligned to project and operational requirements. TERMS AND CONDITIONS Working Conditions Details Department Recruitment Reports to Recruitment Manager Hours of Work 9am-5pm Rate of Pay £26,000-£30,000 p/a Work Location Knowsley/Speke Travel Requirements Ad hoc depending on business needs Holiday Entitlements 33 days including Bank Holidays Benefits Standard Benefits Package KEY RESPONSIBILITIES • Proactively source, attract, and engage sub‑contractors and contingent labour through approved channels including job boards, agency partners, social platforms, networking, and referrals., • Build and maintain talent pipelines to support current and future project‑based and operational resourcing requirements., • Coordinate the recruitment lifecycle for sub‑contractor engagement, including role advertising, candidate sourcing, interview scheduling, selection coordination, and offer documentation., • Work closely with hiring managers to understand assignment requirements, skill needs, availability, and engagement timelines., • Review applications and CVs to identify suitably qualified and experienced candidates against role criteria., • Conduct initial screening conversations to assess skills, experience, availability, and suitability for assignment‑based engagement., • Act as a key point of contact throughout the engagement process, ensuring clear, professional, and timely communication., • Maintain accurate recruitment and compliance records, ensuring all documentation is completed in line with company policies and applicable legislation., • Support adherence to appropriate engagement frameworks, ensuring clear distinction between sub‑contractor and PAYE recruitment processes., • Collaborate with Training, and Operations teams to align resourcing activity with business needs., • Proven ability to source and engage sub‑contractors or contingent workers using a range of resourcing methods., • Experience conducting screening interviews and assessing technical skills and assignment suitability., • Strong communication and stakeholder management skills, with the ability to work effectively with hiring managers, agencies, and external partners., • Ability to build and maintain professional relationships with candidates and supply partners., • Experience supporting offer processes and engagement documentation within agreed frameworks., • Strong organisational skills with the ability to manage multiple live requirements and changing priorities., • High level of accuracy and attention to detail when managing recruitment data, records, and compliance documentation., • Understanding of employer branding within the contractor market and how to position opportunities appropriately., • Previous experience in a recruitment or resourcing coordination role., • Experience supporting high‑volume resourcing as well as specialist or niche skill requirements. HEALTH AND SAFETY RESPONSIBILITIES You are expected to work safely and responsibly within MJ Quinn’s values, operational policies, procedures, and accepted behaviours, ensuring that you avoid harm to yourself, your colleagues, and the communities in which we operate. As one of our core values, Safety Always Matters, and you play an important role in upholding this commitment. By consistently demonstrating safe working practices and contributing to a positive safety culture, you help ensure that everyone can work safe and go home safe. OFFICE BASED STAFF • Follow MJQ H&S Policies., • Do not use/repair equipment without training., • Keep office clear and know emergency procedures., • Avoid unsafe lifting/reaching., • Suggest improvements and attend H&S training. DIVERSITY STATEMENT MJ Quinn is committed to promoting an environment that values diversity. All staff are responsible for ensuring that all employees, customers, suppliers, and visitors are treated equally and fairly and not discriminated against on the grounds of age, disability, gender reassignment, marriage & civil partnerships, pregnancy & Maternity, race, religion or belief, sex, or sexual orientation. MJ Quinn welcomes applications from a diverse range of candidates regardless of their background, disability or gender and is committed to creating a workforce as diverse as the communities we serve. SUSTAINABILTY MJ Quinn is committed to, and is investing in, a sustainable future as this is vital for the planet, our communities, customers, and business. Our sustainability goals are shaped in accordance with wider business objectives and the core foundations of sustainable development. We have a strong history of engaging with our people and we view sustainability no differently. For MJ Quinn this means creating space for proactive participation in the discussions that shape our sustainability aspirations, learning opportunities at all levels, and harnessing employee passion. ABOUT MJ QUINN MJ Quinn is a UK-based infrastructure services provider specialising in delivering comprehensive, end-to-end solutions across a range of industries, including telecommunications, utilities, and mechanical and electrical engineering. Guided by a commitment to quality, innovation, and sustainability, we offer tailored services encompassing design, installation, maintenance, and project management. Partnering with leading organisations, we successfully execute complex projects by leveraging advanced technology and the expertise of our skilled workforce. Our customer-centric approach ensures efficient, reliable service delivery while maintaining our focus on building long-term, sustainable solutions. At MJ Quinn, our purpose is to play a vital role in maintaining and enhancing critical infrastructure, connecting and supporting communities and businesses across the UK. OUR CORE VALUES • People-Focused: We prioritise the well-being, growth, and success of our team and partners., • Safety Always Matters: We are unwavering in our commitment to ensuring a safe environment for all., • Operational Excellence: We strive for the highest standards of quality, efficiency, and continuous improvement. This job description is not an exhaustive list of duties. You may be required to undertake additional tasks that are reasonable and relevant to your role, in line with the organisation’s business objectives. The job description will be reviewed and updated as the role evolves to reflect company activities and role requirements. Any changes will be made following consultation with you and in compliance with employment law and equality legislation.

MANAGING QUANTITY SURVEYOR ABOUT MJ QUINN MJ Quinn is a UK-based infrastructure services provider specialising in delivering comprehensive, end-to-end solutions across a range of industries, including telecommunications, utilities, and mechanical and electrical engineering. Guided by a commitment to quality, innovation, and sustainability, we offer tailored services encompassing design, installation, maintenance, and project management. Partnering with leading organisations, we successfully execute complex projects by leveraging advanced technology and the expertise of our skilled workforce. Our customer-centric approach ensures efficient, reliable service delivery while maintaining our focus on building long-term, sustainable solutions. At MJ Quinn, our purpose is to play a vital role in maintaining and enhancing critical infrastructure, connecting and supporting communities and businesses across the UK. Our Core Values • People-Focused: We prioritise the well-being, growth, and success of our team and partners., • Safety Always Matters: We are unwavering in our commitment to ensuring a safe environment for all., • Operational Excellence: We strive for the highest standards of quality, efficiency, and continuous improvement. DEPARTMENT OVERVIEW MJ Quinn Energy and Critical Infrastructure division is a multi-disciplined integrated service provider headquartered in Liverpool. Specialising in the design, installation, and maintenance of mechanical and electrical systems, our expertise includes energy-efficient solutions like LED lighting, adiabatic and CRAC cooling units, air source heating, solar PV systems, and battery storage. JOB OBJECTIVE Lead the quantity surveying team in overseeing commercial aspects of engineering projects, ensuring effective contract management, financial control, and value optimisation. KEY ROLES AND RESPONSIBILITIES · Strong leadership and mentoring capabilities · Accountability and ownership · Emotional intelligence, fostering trust and cooperation among team members and stakeholders. · Adaptability and resilience in handling multiple projects and shifting priorities. · Integrity and professional ethics in contractual dealings and reporting. · Dedication to continuous professional development and staying abreast of industry changes. PERSON SPECIFICATION · In-depth understanding of industry standards, regulations, and best practices in commercial management. · Awareness of construction costs, and industry developments. · Proficiency in commercial management software and tools · Exceptional analytical and numerical skills with meticulous attention to detail. · Demonstrable experience of commercially managing complex projects using NEC and JCT. · Highly effective communication and negotiation skills, with the ability to build and maintain relationships. · Outstanding organisational and time management skills, managing multiple tasks and priorities. · Advanced conflict resolution, emotional awareness and resilience in handling challenging situations. Occasional travel Benefits Free car parking, 2 x death in service benefit, healthcare plan, cycle scheme & company contribution pension scheme, enhanced maternity and paternity DIVERSITY STATEMENT MJ Quinn is committed to promoting an environment that values diversity. All staff are responsible for ensuring that all employees, customers, suppliers, and visitors are treated equally and fairly and not discriminated against on the grounds of age, disability, gender reassignment, marriage & civil partnerships, pregnancy & Maternity, race, religion or belief, sex, or sexual orientation. MJ Quinn welcomes applications from a diverse range of candidates regardless of their background, disability or gender and is committed to creating a workforce as diverse as the communities we serve.

DEPARTMENT OVERVIEW The Project Management Department is responsible for planning, coordinating, and delivering projects that meet organisational goals, client expectations, and regulatory requirements. The team oversees the full project lifecycle — from initial scoping and budgeting to execution, monitoring, and final handover. JOB OBJECTIVE The Project Manager (OSA) is responsible for managing the programme of maintenance repair activities across a defined geographical area, ensuring operational and commercial targets are achieved throughout the full project lifecycle. The postholder will create strong, collaborative relationships with stakeholders, ensure project readiness, oversee resource levels, and drive performance to meet delivery expectations. This role requires excellent leadership skills, strong technical understanding of fibre / maintenance, and the ability to proactively manage risks, resources, and partners while ensuring the highest standards of quality, compliance, and customer service. TERMS AND CONDITIONS Working Conditions Office Based Department OSA Reports to Senior Operations Manager Hours of Work Monday–Friday, 08:30–17:00 Rate of Pay £45,000 – £55,000 p/a Work Location Knowsley (Soon to be relocating to L24) Travel Requirements Occasional Site Meetings Holiday Entitlements 33 days including Bank Holidays Benefits Standard Benefits Package KEY RESPONSIBILITIES • Overseeing the current OSA project from start to finish., • Forecast & exceed set THP quarterly & annual delivery targets, • Ensure sufficient office & field resource is in place to meet & exceed set targets, • Build and maintain close & professional working relationships with our partners, • Liaise closely with the office and field delivery teams to identify any potential design or construction issues, • Work closely with the project & commercial teams to ensure all activities are invoiced correctly & on time, • Work with the commercial team to onboard sub-contractors as required to meet build requirements, • Overall responsibility for all site works, methodology, and programme including resource requirement from both existing workforce and from sub-contractors., • Ensure all civils activities have recorded & submitted registration details in line with HA requirements, • Work closely with various departments within MJ Quinn to ensure all SLA’s and targets are communicated clearly and achieved efficiently, • Carry out regular audits of staff performance and quality of work to ensure the highest standard of service and workmanship is being achieved., • Where applicable ensure that CDM projects are delivered in line with CDM requirements, • Responsible for chasing up all incomplete works; prioritising and rectifying accordingly. This will then need to be verified before sign-off by the client. PERSON SPECIFICATION Essential • Extensive experience working in a Fibre Build Project Management role on PON (FTTP), Spine & Poling works on Network Build Telecoms projects, • Experience of running large scale Fibre projects across multiple sites & councils, • Ability to lead and inspire a team of people, • Strong communication skills and the ability to present performance to internal and external stakeholders, • Proficient knowledge of Fibre PON build specifications, • Extensive experience of engaging with Local Authorities, • Expert knowledge of NRSWA (Ops & Supervisor) SROH & HAUC guidelines, • Proficient knowledge of CDM (Construction Design Management) – trained to SMSTS level, • Good experience of noticing systems – Eton, Bentley, Symology, • Proficient knowledge of reinstatement guidelines & techniques, • Good understanding of Traffic Management guidelines for utility works in the Highway, • Experience of reporting into director level (internal and external i.e. partners/clients) DIVERSITY STATEMENT MJ Quinn is committed to promoting an environment that values diversity. All staff are responsible for ensuring that all employees, customers, suppliers, and visitors are treated equally and fairly and not discriminated against on the grounds of age, disability, gender reassignment, marriage & civil partnerships, pregnancy & Maternity, race, religion or belief, sex, or sexual orientation. MJ Quinn welcomes applications from a diverse range of candidates regardless of their background, disability or gender and is committed to creating a workforce as diverse as the communities we serve. SUSTAINABILTY MJ Quinn is committed to, and is investing in, a sustainable future as this is vital for the planet, our communities, customers, and business. Our sustainability goals are shaped in accordance with wider business objectives and the core foundations of sustainable development. We have a strong history of engaging with our people and we view sustainability no differently. For MJ Quinn this means creating space for proactive participation in the discussions that shape our sustainability aspirations, learning opportunities at all levels, and harnessing employee passion. ABOUT MJ QUINN MJ Quinn is a UK-based infrastructure services provider specialising in delivering comprehensive, end-to-end solutions across a range of industries, including telecommunications, utilities, and mechanical and electrical engineering. Guided by a commitment to quality, innovation, and sustainability, we offer tailored services encompassing design, installation, maintenance, and project management. Partnering with leading organisations, we successfully execute complex projects by leveraging advanced technology and the expertise of our skilled workforce. Our customer-centric approach ensures efficient, reliable service delivery while maintaining our focus on building long-term, sustainable solutions. At MJ Quinn, our purpose is to play a vital role in maintaining and enhancing critical infrastructure, connecting and supporting communities and businesses across the UK. OUR CORE VALUES • People-Focused: We prioritise the well-being, growth, and success of our team and partners., • Safety Always Matters: We are unwavering in our commitment to ensuring a safe environment for all., • Operational Excellence: We strive for the highest standards of quality, efficiency, and continuous improvement. This job description is not an exhaustive list of duties. You may be required to undertake additional tasks that are reasonable and relevant to your role, in line with the organisation’s business objectives. The job description will be reviewed and updated as the role evolves to reflect company activities and role requirements. Any changes will be made following consultation with you and in compliance with employment law and equality legislation.

ABOUT MJ QUINN MJ Quinn Integrated Services Ltd is a UK-based company specialising in delivering end-to-end infrastructure services across multiple industries, including telecommunications, utilities, and mechanical and electrical engineering. Established with a commitment to quality and innovation, MJ Quinn provides tailored solutions that integrate design, installation, maintenance, and project management. The company partners with leading organisations to execute complex projects, leveraging cutting-edge technology and a skilled workforce to ensure efficient and reliable service delivery. MJ Quinn’s customer-focused approach and dedication to sustainability have solidified its reputation as a trusted provider in the infrastructure services sector. DEPARTMENT OVERVIEW Following an intensive bid process, we are delighted to announce that MJ Quinn have been awarded the OSA (Openreach Service Agreement) contract which brings significant growth across area such as Mid North Wales, South Wales, The Marches, West Mid Staff and Central regions. This is one of the most significant contract awards in the company’s history and represents a major win in the face of stiff competition from other major national suppliers. OSA is an updated version on Openreach’s former ONSA contract and includes full regional ownership of most network upgrade programmes, network maintenance and repair activities on behalf of Openreach. JOB OBJECTIVE We are seeking a Desk Delivery Manager to support the Project Manger by managing all back-office resource to ensure targets (Operational & Commercial) are achieved throughout the lifecycle of the project. This role will enable the PM to focus on Stakeholder Relationship, Commercials & overall performance of the project while at the same time providing a road map for the Assistant Manager to gain the knowledge & experience required to become a competent project manager for future projects KEY ROLES AND RESPONSIBILITIES • To support the project manager through management of the back office and field force, • Assist with training, coordination of tasks to ensure they have sufficient work in line with targets., • Ensuring that the work force is fully accredited in all Openreach, council and MJQ requirements, working in line with MJQ accredited training school., • Chairing and attending meetings with internal and external stakeholders., • Verification of all direct labour timesheets, • Verification of all Sub-contractor invoices, • Ensuring all DFEs are captured and applied for, • Ensuring that all customer targets are met., • Making sure that we maintain a strong fluidity of work., • Compiling accurate reports of all work aspects, • To work safely and responsibly within MJ Quinn’s values and operational policies, procedures, and accepted behaviours to avoid harm to yourself, those around you and our neighbours and communities., • Being pro-active to adapt any current processes and improving efficiencies of current way of working., • Ensuring that all systems are kept up to date with accurate information (Depot net/CRM), • Making sure that all costs attributed against the project are accurate and captured fully., • Maintaining a strong WIP position for the project, • Building a strong working relationship with the project team, • Building a strong relationship with the customer, • Ensuring that all company policies are adhered too., • Helping to develop the team to help progression within the business and to make sure that everyone is performing to the best of their abilities., • Giving constant feedback of progress and issues to the Project Manager, • Making sure the project is delivered in the most cost-effective way. PERSON SPECIFICAITON • A candidate with strong stakeholder management skills and a history of managing change., • Excellent communication skills, capable of reporting up to director level., • A proven track record of hitting KPIs in a fast-paced environment., • Competency in managing change effectively., • Have a strong orientation towards quality, safety, and continuous improvement., • Have the ability to prioritise work, work well under pressure, meet deadlines and manage business expectations., • Be adaptable and flexible in your approach to work. To be successful in this role the Desk Delivery Manager will have: • Have strong planning, organisation, and monitoring abilities., • Enjoy a challenge, have excellent interpersonal skills and the ability to communicate at all levels., • Have a high standard of numeracy., • Be educated to a G.C.S.E level B+ in Mathematics & English (or equivalent)., • Be computer literate., • Have strong written and verbal communication skills., • Have a strong orientation towards quality, safety, and continuous improvement., • Can prioritise work, work well under pressure, meet deadlines, and manage business expectations., • Be adaptable and flexible in your approach to work. Working Conditions Details Department OSA Reports to Senior Operations Manager Hours of Work 08:30am – 17:00pm Rate of Pay £30,000 - £32,000 Work Location Knowsley (Soon to be relocating to L24) Travel Requirements N/A Holiday Entitlements 33 days inclusive of bank holidays Benefits Full Benefits Package DIVERSITY STATEMENT MJ Quinn is committed to promoting an environment that values diversity. All staff are responsible for ensuring that all employees, customers, suppliers, and visitors are treated equally and fairly and not discriminated against on the grounds of age, disability, gender reassignment, marriage & civil partnerships, pregnancy & Maternity, race, religion or belief, sex, or sexual orientation. MJ Quinn welcomes applications from a diverse range of candidates regardless of their background, disability or gender and is committed to creating a workforce as diverse as the communities we serve.

An established North West based contractor is looking to appoint a Quantity Surveyor to take full ownership of the commercial function across a varied portfolio of mechanical, electrical and construction-led projects. The business has a long-standing regional presence and delivers projects across sectors including education, healthcare, housing, retail and leisure. They offer a full service covering design, installation, refurbishment and maintenance, and have built a strong reputation for quality delivery and long-term client relationships. This is a standalone commercial role, offering the opportunity to become the company’s sole Quantity Surveyor and take real ownership of the function. Rather than joining a larger commercial team in a narrowly defined role, you will have broad exposure across the full project lifecycle and the chance to shape commercial processes, reporting and controls as the business continues to grow. Working closely with the directors and operational team, you will be responsible for ensuring projects are commercially managed from pre-contract through to final account, while supporting wider business performance and profitability. The Role As Quantity Surveyor, you will take responsibility for the commercial management of multiple projects across the North West. The role will involve a mix of estimating support, subcontractor procurement, cost control, valuations, variations, reporting and final accounts. Because this is the only Quantity Surveying role in the business, it would suit someone who enjoys autonomy, wants greater visibility, and is comfortable operating across both day-to-day project commercial management and broader strategic input. Key Responsibilities Commercial Management • Take ownership of the commercial performance of projects from pre-contract stage through to completion, • Monitor budgets, costs, forecasts and cash flow across multiple live schemes, • Prepare and manage valuations, variations, cost reports and final accounts, • Identify and manage commercial risk across projects, • Ensure projects are delivered in line with agreed commercial targets Procurement and Supply Chain • Manage subcontractor and supplier procurement, • Review quotations, negotiate packages and place orders, • Assess and process subcontractor applications and invoices, • Manage subcontractor accounts, including variations and final account agreement Pre-Contract Support • Assist with pricing, cost planning and tender reviews where required, • Support the operational team in building commercially viable delivery plans, • Provide input on budgets, programme implications and procurement strategy before project start Reporting and Process Improvement • Produce regular commercial reports for senior management, • Improve and maintain commercial procedures, controls and reporting structures, • Support the directors with forecasting and financial visibility across the project portfolio, • Help develop a more robust commercial function as the business grows Project and Client Liaison • Work closely with project managers and directors to support successful project delivery, • Attend meetings with clients, subcontractors and internal stakeholders where required, • Maintain strong relationships and ensure commercial matters are dealt with proactively and professionally Why the Role Stands Out • Sole Quantity Surveyor position with genuine ownership of the commercial function, • Broad role with visibility across the whole business rather than a narrow package-based remit, • Opportunity to influence processes and help shape the commercial structure, • Varied project portfolio across education, healthcare, housing, retail and leisure, • Established regional contractor with a strong reputation and a healthy pipeline of work Essential Requirements • Proven Quantity Surveying experience within building services, M&E, refurbishment, fit out or wider construction, • Strong understanding of cost control, valuations, variations and final accounts, • Experience dealing with subcontractor procurement and account management, • Comfortable managing multiple projects at once, • Commercially astute, organised and confident working independently, • Strong communication skills and the ability to work closely with operational teams and senior leadership, • Relevant construction or commercial qualification preferred Ideal Background • Experience within an M&E contractor, specialist contractor or general construction environment, • Comfortable working in a standalone or highly autonomous commercial role, • Able to operate both strategically and hands-on, • Experience in live environments such as education, healthcare, housing or public sector-led work would be advantageous

The Opportunity We are seeking a talented, hands on MEP engineer wishing to take on a leadership role and eager to make a real impact on Trident, our exceptional client base and on the sector more widely. Trident BC is not only one of the leading national building consulting businesses with a client base envied by even our largest competitors. We are a proud Employee-Owned B Corp business and a Gold accredited “Investor in People” with a commitment to delivering net zero. We place our Employee Owners at the heart of everything we do and have a created a culture that embraces inclusion, flexibility, wellbeing and collaboration, as well as technical excellence and innovation. And we are on a mission to change real estate for good; to create resilient assets that make a positive environmental and social impact. Key to delivering on this ambition will be the growth and development of our sustainability MEP advisory services. The Purpose The MEP Consulting Lead presents a significant opportunity for Trident; and we hope for you too. The purpose is to develop a sustainability led MEP solution that supports our clients from initial assessments to feasibility studies, design and through to practical completion. Responsibilities The MEP Consulting Lead presents a significant opportunity for Trident; and we hope for you too. The purpose is to develop a sustainability led MEP solution that supports our clients from initial assessments to feasibility studies, design and through to practical completion. • Service delivery: Delivering high quality advice and support to our clients:, • Assessments: Support condition surveys, asset and portfolio reviews and vendor reports with MEP inspections and advisory surveys, • Feasibility & MEP Strategies: Develop MEP and decarbonisation strategies and feasibility studies to support clients commercial and sustainability objectives, • Design: Oversee, review and support the development of practical, low carbon and innovative MEP designs for existing portfolios, refurbishments and development projects, • Delivery: Coordinate with project teams, monitoring progress, costs & quality, providing solutions to construction challenges to support delivery., • Handover: Oversee the commissioning and handover of MEP systems to clients and ensure compliance with industry standards, local codes, safety regulations and client requirements, • Service development: Establish our propositions, processes, tools and marketing materials in partnership with our business development teams to support the growth of our MEP services, • Relationship & business development: Establish relationships across Trident and with our clients to identify and develop MEP opportunities that will deliver on our shared decarbonisation goals, • Team development: Grow a high performing and collaborative team over time, • Partnership development: build on Trident’s excellent network of partners to and engage with industry to raise your and Trident’s profile. Skills and qualifications • Extensive MEP engineering & consulting capability, with deep technical expertise, • Relevant qualifications such as building services, mechanical or electrical engineering degrees, • Strong experience through the project lifecycle, from feasibility to detailed design and delivery, • Proficiency in relevant software and tools such as AutoCAD, Revit and IES, • Excellent project management, budgeting, cost control and problem-solving capabilities, • Excellent client management ability, with a strong track record of leading and winning bids, • Experience in developing low-carbon MEP solutions aligned to organisations’ net zero targets, • Experience in commissioning & handover, ensuring compliance with industry standards & regulations, • Strong team leadership, able to provide technical leadership and mentoring, • Strong communication skills, able to engage confidently with clients and internal stakeholders, • Integrity, a commitment to excellence, collaborative and a passion for addressing climate change. About Trident In June 2022 Trident proudly became an Employee Ownership Trust. Trident has recently been awarded “Investors in People” Gold accreditation, which demonstrates that our people are our most important asset. Trident’s culture embraces diversity, equality and inclusion (DEI) across our offices and our team enjoy a healthy work life balance that supports physical and mental wellbeing. Trident are B Corp certified and were featured in the Sunday Times, Best Places to Work 2025! We have also partnered up with PREACH Inclusion to implement our DEI Framework. We've meticulously measured our carbon footprint and set a science-based target through SBTi (Science Based Targets Initiative), ensuring our goals are grounded in scientific consensus. Our network of national regional and offices work as a collaborative team to provide the highest level of Building Surveying and Project Management to our enviable client list. Our agile working policy has operated since 2019 and it recognises that work is not just performed “9 to 5” in the office, allowing our staff the flexibility to vary working hours and to work remotely although we encourage staff to attend the office regularly to help promote our core values of team working and collaboration. To Apply This is a rare opportunity for an exceptional leader to build a new MEP capability across the UK, and to work with some of the largest investors, developers and occupiers to transition towards a low carbon future. If you are looking for genuine autonomy and space to innovate within a collaborative environment; and with access to an exceptional client base, then please apply via LinkedIn.

“We’re looking for a Service and Commissioning Technician at VPS Emsys Maritime who can support our clients globally. International travel to exciting locations, working on specialised projects” WHO WE ARE Come and join the revolution, as the world is challenged to reduce CO2 and Greenhouse gases to prevent further global warming, there is an ever-increasing requirement to report exhaust gas emissions from the shipping industry. VPS Emsys Maritime is a leading manufacturer of ship and maritime exhaust gas emissions measurement systems. Emsys Maritime Ltd. was acquired by VPS in 2023 and has been incorporated into the VPS Digital division. VPS is the world’s leading marine fuel and lubricants testing and analysis company and a pioneer in its field for creating innovative, sustainable solutions to the shipping industry. We are experiencing strong growth, with a forward order book extending well into the next decade. To support our expanding customer base and continued product development, we are looking to strengthen our team. Our internal supportive culture is ideal for those who want to join an organisation which provides a challenging environment and opportunities for personal skills development. As exclusive suppliers to marine and offshore industries, our highly experienced team have market-leading expertise in the design, installation, commissioning, and through-life support of marine emissions monitoring systems (EMS) THE OPPORTUNITY We are currently looking for a marine service and commissioning technician to join our team. You will be part of a highly experienced team working on the design, installation, commissioning, and long-term support of marine emissions monitoring systems. This is a key service role, servicing, repairing, installing and commissioning of Emsys emissions monitoring systems onboard ocean-going ships and shipyards on a global basis. Your background should include working on electrical, electronic and mechanical systems and you should be comfortable in fault-finding systems that include PLC and PC based software environments. A full in-depth system training will be provided. This role will require flexibility to travel globally to meet our client’s requirements. What you will do: In this role you will • Carry out service, maintenance and repair work on board ships worldwide, • Ensure systems are up and running by diagnosing issues and delivering effective first-time fixes, • Recommend spares holding for customers., • Provide remote technical support to customers, including troubleshooting guidance, • Update admin systems of work completed., • Preparing Method of Works and Plans of Action as required., • Work closely with the Service Manager to help efficiently schedule your visits, • Update inhouse systems with service information reports, • Liaise directly with customers, captains and port agents, • Handle administrative tasks such as reporting, documentation and expense processing, • Contribute to a safe working environment by following HSQE procedures. This is important as we deal with challenging customers in sometimes difficult environments. What you bring We are looking for someone who is practical, technically skilled and confident working with customers in dynamic environments. • Technical background in Mechanical or Electrical Engineering (or equivalent), • Around 3+ years of relevant experience, • Ideally a technical understanding of the marine emissions monitoring industry and the products and services supplied by the company., • Strong organisational and administrative skills, • Confident communicator in English (spoken and written), • Able to stay calm and constructive in challenging situations, • Customer-focused with a proactive, problem-solving mindset, • Comfortable taking initiative and working independently, • Demonstrate drive and passion for continuous improvement., • Physically fit and comfortable working on board ships Additional requirements • Willingness to travel internationally (Europe, US, Middle East, South America, Caribbean, Far East), • Valid right to live and work in the UK, • Full driving licence OUR OFFER TO YOU • Fulltime job, • Competitive base salary (£45,000-£50,000 per year), • Deployment allowance (£45 per day), • Flexible working contract, • Tools, workwear, laptop, mobile phone, tablet, company credit card, travel insurance, • Comprehensive training program, • 28 days annual paid leave

Our Construction client is recruiting for a Street Lighting Supervisor role in Hillingdon, London.\n\nAs an Electrical supervisor, you will assume responsibility for overseeing activities and resources to ensure site safety and compliance, all while upholding the highest standards of excellence, productivity, and performance.\n\nYour pivotal role contributes significantly to upholding high-quality street lighting services in West London\n\nPrioritising client and customer satisfaction, adherence to quality and safety standards, and profitability. Planning, programming, and leading a team of operatives, you will cultivate a positive work environment, fostering outstanding performance. You will have the ability and experience\n\nREQUIRED CRITICAL SKILLS AND BEHAVIOURS\n\n * Previous experience in Street Lighting projects ideally term service contracts\n\n * Results-oriented with a commitment to on-time, on-budget project delivery.\n\n * Input into programming and scheduling skills, including annual programme development\n\n * and associated budgeting.\n\n * Commercial acumen and understanding of Profit and Loss (P&L).\n\n * Adaptability to a dynamic, fast-paced environment.\n\n * Strong leadership skills with a proven track record of team supervision and high performance, capable of instructing and motivating teams.\n\n * Experience working under NEC Contracts desirable\n\n * Proficiency in supervision principles, including budgeting, cost control, and safety.\n\n * Excellent communication skills to effectively interact with various stakeholders.\n\n * In-depth understanding of health and safety regulations, especially responsibilities under\n\n * Construction (Design & Management) Regulations 2015\n\n * Ability to work in a high-pressure environment.\n\n * Self-motivated with effective motivational skills.\n\n * Good IT skills.\n\n * Hold a SSSTS Card\n\n * CSCS card & CITB SMSTS.\n\n * A valid driver's licence.\n\n * Prioritise Safety, Delivery, commercial aspects, and Client and customer excellence.\n\nIf you feel you have the right skills and experience, please apply straight away

Vertical Recruitment is working closely with one the Industries Leading Building Services Consultancies. Operating from 6 strategically placed UK offices, they offer the full range of building services design and engineering solutions across Mechanical, Electrical and Sustainability. The business has a proven track record in delivering a high-quality service across a range of industry sectors. An employee focussed organisation, committed to investing and nurturing its people throughout the business.\nDue to the acquisition of some major projects in the Healthcare and Commercial Sectors, the business is looking attract Electrical Building Services Design Engineers.\nResponsibilities and authority:\n * Produce Electrical Design drawings, calculations & reports, specifications and schedules.\n * Contribute to BREEAM or equivalent legislation\n * Witness test the proving and commissioning procedures of final installations\n * Work to internal and external project programs effectively\n * Work to company Quality Assurance management systems\n * Support Senior/ Associate Engineers and Management\n * Communicate effectively with internal and external design team member\n * Undertake non-intrusive surveys of existing installations\n * Undertake main plant area spatial allowance exercises\n * Ensure industry knowledge is kept up to date with new legislation, standards and regulations, product development and new technology\n * Attend and contribute to design team and project meetings\n * Study towards chartership and maintain CPD requirements\n * Liaise with lead and/or support engineers to ensure that discipline designs are completed to expected quality and programme\n * Collaborate and work effectively with all others affecting or affected by your work\n * Carry out all personal management duties including weekly timesheets\n * Comply with all security procedures and commercial in-confidence restrictions associated with work duties\nEducation and Experience:\n * Engineering Degree preferred.\n * Minimum Engineering HNC/D or equivalent qualification\n * Alternatively suitable Construction site-based experience with a recognised completed electrical apprenticeship\nOn Offer to you..\n * Company Pension\n * Healthcare Plan\n * Hybrid Working\n * Investment in continued professional development\n * Annual Bonus

Car allowance \nPrivate healthcare\nLife assurance (4x salary) \nSalary sacrifice\n pension scheme\n 25 days annual leave + bank holidays \nOngoing training & professional development \nOpportunity to lead complex, low-carbon industrial energy projects \nStrong long-term career progression within a growing business \n\nAn ambitious and fast-growing energy business is seeking a Project Manager to deliver complex industrial energy projects across the UK. \n\nWorking with energy-intensive clients, the role spans feasibility through to construction and handover, integrating technologies such as CHP, solar PV, and heat pumps. \n\nYou’ll support the development and delivery of energy projects across their lifecycle, taking ownership of defined workstreams, Ideal for a commercially aware project leader experienced in live industrial environments. \n\nKey Responsibilities\nContribute to early-stage project development, including feasibility, scope definition and site assessment across complex industrial environments\nHelp shape solutions that may integrate multiple technologies (e.g. CHP, solar PV, heat recovery, battery storage), ensuring they are practical and deliverable \nSupport delivery of multi-disciplinary energy and infrastructure projects within live industrial sites\nDrive delivery across design, construction and commissioning phases within your scope\nCoordinate contractors and suppliers across mechanical, electrical and civil scopes\nAttend site meetings and support day-to-day project coordination\nSupport safe delivery of projects within live industrial environments Essential:\nEngineering background (Mechanical, Electrical, Process or similar)\nExperience supporting or delivering projects within engineering, energy, construction or infrastructure environments\nExperience across planning, construction, and commissioning phases\n Understanding of project lifecycle from development through to delivery\nStrong commercial awareness including budgeting, forecasting, and change management\nStrong stakeholder management and client-facing experience\nExperience managing multiple projects concurrently\nClear communication skills and strong risk awareness\nFull UK driving licence and willingness to travel This is a unique opportunity to take a leading role in delivering technically complex, high-value energy infrastructure projects that directly support industrial decarbonisation. You’ll work across a diverse project portfolio while building long-term career progression within a growing, purpose-driven business

A Mechanical Design Engineer / Senior Mechanical Design Engineer / Mechanical Engineer is required for a manufacturer in Liverpool.\n\n The Mechanical Design Engineer / Senior Mechanical Design Engineer / Mechanical Engineer will be responsible for the mechanical department, with full involvement in design and training / management of engineers.\n\n The successful Mechanical Design Engineer / Senior Mechanical Design Engineer / Mechanical Engineer will have experience in metal components, welding, sheet metal, metal enclosures, fabrication or assembly design and experience using SolidWorks.\n\n Package:\n\nUp to £60,000 basic salary\nDiscretionary bonus\n25 days holiday + BH\nHybrid working\nChristmas shutdownResponsibilities Mechanical Design Engineer / Mechanical Engineer\n\nLead the design of metal enclosures and assemblies using SolidWorks, from concept to production.\nCreate and review 3D models, detailed drawings and BOMs\nTrain and mentor junior engineers, providing guidance on SolidWorks best practices and design standards.\nOversee design validation and continuous improvement of mechanical systems and documentation.\nCollaborate with cross-functional teams to ensure seamless integration of mechanical and electrical designs.Requirements Mechanical Design Engineer / Mechanical Engineer\n\nProven experience in a Mechanical Design Engineer / Mechanical Engineer role, ideally with a sheet metal / metal enclosures / assembly design background\nExperience using SolidWorks\nDegree educated in Mechanical Engineering or equivalent experience\nCommutable to Liverpool

Come to a place where job satisfaction is as important as productivity."\n\nWith hybrid and agile working standard for all employees a relaxed atmosphere exists based on maturity.\n\nWith state of the art offices to work from and very diverse projects to work its easy to see why staff turnover is so low.\n\nEngineers feel energised by the work and rewards but don't miss out on their work/life balance.\n\nWhat will you be doing:\n\nElectrical design for building services solutions\n\nWriting specifications, producing drawings and liaising closely with the Cad/REVIT teams.\n\nYou'll also get the chance to work on performance specifications, surveys, reports and act as a clients representative.\n\nWhat you'll need:\n\n * Demonstrable experience within a similar or relevant working environment at intermediate grade or above.\n\n * Competency with the market leading software required to produce and validate design outputs.\n\n * A genuine interest and enthusiasm for the built environment.\n\nThe company\n\nA well known name in the industry, our client has been involved with numerous landmark schemes in Manchester and Liverpool city centres. A very well run company with excellent core values and beliefs.\n\nProjects\n\nVery varied including low carbon consultancy schemes, education, emergency services, residential and civic buildings

Our client is one of the world leading manufacturer of special purpose machinery to companies both in the UK and overseas and Staffbase have been appointed to recruit for the position of Multiskilled Engineer Electrical bias.\n\nBasic Salary £45K - £50K Neg + OT + Benefits \n\nThe Role:\n\nWorking as part of a small team you will be responsible for building, testing, installation, commissioning and some service and repair work of machinery at both in the UK and overseas. \n Your duties will include but is not limited to the following;\n\nAssist with design and build of electrical control panels for bespoke machinery\nWorking with hydraulic & pneumatic systems\nMechanical fitting and assembly of components, gearboxes, motors, pumps, etc etc\n3-phase electrical fault find and repair on motors, servos, 415v and 24v circuits \nplc controlsCandidate:\n\nYou will be a competent multiskilled engineer with excellent electrical and mechanical engineering skills. \n You will have a recognised electrical engineering qualification and ideally you will have previous experience in the installation, service and repair of automated machinery. \n\nYou will demonstrate good customer service and communication skills and you will be of a friendly disposition.\n\nYou will be prepared to undertake occasional (3-4 trips per annum) UK and international travel as part of your work routine.\n\nHours of Work:\n\nMonday to Thursday 37.5 hours + OT\n Occasional weekend work\n\nBenefits:\n\nBasic salary negotiable £45K - £50K + OT\nPhone, laptop\nAll expenses paid\n33 days annual leave\nPension

Your new company \nReporting to the Head of Estates, you will play a key leadership role in safeguarding the health, safety and wellbeing of all building users across the estate. You will be responsible for the effective delivery of reactive maintenance and statutory compliance activities, ensuring all works are completed to the highest standards and within required timeframes. You will also oversee the timely production and accuracy of maintenance reports, and ensure that all Planned Preventative Maintenance is scheduled, monitored and delivered in line with organisational, legal and industry requirements. Through proactive management and a strong focus on service quality, you will help maintain safe, secure and well-maintained environments across all sites. You will be based in Liverpool, managing a team of 5 staff and a portfolio of 22 buildings across the wider Liverpool region. \n\nYour new role \n-Ensure statutory compliance and Health & Safety standards. Maintain safe systems of work, oversee compliance with CDM 2015 regulations, and act as the responsible person for statutory schemes (e.g. asbestos, legionella).\n-Manage estate maintenance and repairs. Oversee planned and reactive maintenance programs, ensuring quality standards, timely delivery, and adherence to financial regulations.\n-Coordinate contractors and Facilities Management partners. Manage external contractors and Facilities Management partners, monitor performance against SLAs, and ensure safe execution of works.\n-Monitor building condition and infrastructure. Maintain accurate estate drawings and condition records, oversee inspections of building fabric and mechanical and electrical systems, and safeguard environmental standards for collections.\n-Lead compliance reporting and documentation Produce reports on maintenance progress, statutory compliance, and energy consumption, in line with government requirements.\n-Support capital projects and estate development. Contribute to design, delivery, and handover of major projects, advise on building extensions and conversions, and participate in a Soft Landings approach.\n-Manage budgets and resource allocation Control allocates budgets for repairs and maintenance, distribute work within the team, and ensure efficient use of resources.\n-Provide leadership and customer-focused service Oversee Estates help desk operations, participate in performance reviews, and ensure team training in Health & Safety and project management.\n\nWhat you'll need to succeed \n- You will have good hard services experience.\n- Good compliance experience and knowledge\n- Ideally plant room experience\n- Good leadership and management experience\n- Able to manage mufti sites\n- It would be advantageous if you have worked on listed buildings or in conservation\n\nWhat you'll get in return \n- £43000 salary\n- 38 days holiday including bank holidays\n- 35 hour week\n-Civil Service Pension Scheme\n-35% staff discount in all Cafés\n-25% staff discount in all Shops\n-Employee Assistance Programme\n-Employee Benefits Portal: High Street discounts, retailer discounts, locally negotiated discounts, Cycle to Work Scheme, Travel Loan Scheme, Eyecare Scheme, Smart Pay Scheme\n\nWhat you need to do now\nIf you're interested in this role, click 'apply now' to forward an up-to-date copy of your CV, or call us now.\nIf this job isn't quite right for you but you are looking for a new position, please contact us for a confidential discussion about your career.\n\nHays Specialist Recruitment Limited acts as an employment agency for permanent recruitment and employment business for the supply of temporary workers. By applying for this job you accept the T&C's, Privacy Policy and Disclaimers which can be found at (url removed)

Job Title\n\nTechnical Services Manager\n\nRole Purpose\n\n The Technical Services Manager is responsible for the safe, reliable, compliant, and customer‑focused operation of building engineering systems and associated building fabric within a shopping centre environment. The role focuses on technical assurance, operational performance, asset condition, and service continuity for both critical and non‑critical assets that support a safe, attractive, and fully operational retail destination.\n \nActing as the senior technical authority on site, the postholder ensures that mechanical, electrical, life safety, and building fabric elements operate in line with statutory obligations, manufacturer requirements, landlord standards, and agreed service levels, while supporting continuous improvement, resilience, and positive occupier and visitor experience.\n \nThis role is deliberately non‑financial in nature and does not include budget ownership, service charge management, or commercial financial accountability.\n\nKey Responsibilities\n\nTechnical & Operational Leadership\n\nProvide day‑to‑day technical leadership for mechanical, electrical, life safety, and associated building systems across the shopping centre.\nAct as the primary technical escalation point for complex plant failures, system alarms, fabric defects, and abnormal operating conditions.\nEnsure all plant, equipment, and fabric elements are operated and maintained within design parameters, statutory requirements, and manufacturer specifications.\nMaintain oversight of critical systems including HV/LV, UPS, generators, BMS, fire systems, security interfaces, HVAC, and public‑facing infrastructure.\n\nCompliance, Assurance & Safety\n\nEnsure full statutory compliance across all engineering and fabric‑related activities, including health & safety, fire safety, accessibility, and environmental requirements.\nImplement and maintain safe systems of work, permits, risk assessments, and method statements for engineering and fabric works.\nEnsure engineering and fabric documentation, O&M manuals, drawings, inspection records, and certification are accurate, current, and readily available.\nCarry out regular audits, inspections, and technical reviews of plant rooms, back‑of‑house areas, service corridors, roofs, and public areas to identify risk and drive corrective actions.\n\nPlanned & Reactive Maintenance\n\nOversee delivery of planned preventative maintenance (PPM) and reactive works for engineering systems and building fabric to ensure asset reliability, safety, and presentation.\nReview maintenance trends, asset condition, and defect data to support proactive and condition‑based maintenance approaches.\nEnsure incidents, defects, alarms, and fabric failures are investigated, recorded, prioritised, and resolved effectively.\nSupport the development, testing, and continuous improvement of operating procedures and emergency response plans relevant to a live retail environment.\n\nBuilding Fabric Management\n\nProvide management and technical oversight of building fabric elements including roofs, façades, glazing, floors, walls, doors, loading bays, malls, service yards, and landlord areas.\nCoordinate fabric inspections and surveys, ensuring defects are identified early and managed in line with risk and operational impact.\nOversee reactive and planned fabric repairs, ensuring works are completed safely, to an appropriate standard, and with minimal disruption to trading.\nEnsure fabric works comply with statutory requirements, fire strategy, accessibility standards, and landlord design principles.\nMaintain close coordination between fabric and M&E activities to ensure holistic asset performance.\n\nTeam & Contractor Management\n\nProvide direct leadership and technical guidance to site engineering teams, including shift and day engineers.\nCoordinate daily workloads, task prioritisation, and operational coverage to maintain service continuity during trading hours and out‑of‑hours periods.\nDirect and supervise contractors and specialist service partners undertaking engineering or fabric works, ensuring compliance with site rules, permits, and safe working practices.\nIdentify training needs and support the development of technical and safety competence within the site team.\n\nRetail Environment & Stakeholder Support\n\nSupport the safe operation of the shopping centre during trading hours, events, peak periods, and seasonal activities.\nProvide technical support and assurance to centre management, retailers, and operational stakeholders regarding engineering and fabric matters.\nCoordinate works planning to minimise disruption to retailers, customers, and centre operations.\nSupport incident response in public areas, ensuring safety, communication, and swift technical resolution.\n\nReporting & Communication\n\nProduce clear technical and fabric condition reports covering incidents, compliance status, asset condition, and operational risk.\nMaintain accurate shift logs, inspection records, and incident reports.\nCommunicate engineering and fabric risks, defects, and improvement opportunities to senior stakeholders in a timely and professional manner.\nProvide authoritative technical input to support occupier engagement and landlord assurance.\n\nProjects & Change Support\n\nProvide technical and fabric input into small works, refurbishments, asset replacements, and minor modifications.\nSupport commissioning, handover, and integration of new or modified plant and fabric elements.\nWork collaboratively with project and centre management teams to resolve technical, safety, and operational challenges.\n\nInterfaces\n\nSite engineering teams and supervisors\nBuilding fabric contractors and specialist service providers\nShopping centre management teams\nRetailers and occupiers (as required)\nHealth & Safety and Fire Safety representatives\nClient and operational stakeholders\nProject and transition teams\n\nSkills & Experience\n\nEssential\n\nRecognised apprenticeship or equivalent qualification in mechanical or electrical engineering.\nStrong experience working with business‑critical building services systems in a live operational environment.\nDemonstrable experience overseeing or coordinating building fabric maintenance and repairs.\nProven ability to lead engineering teams and manage contractors on a complex site.\nSound knowledge of statutory compliance, health & safety legislation, fire safety, and safe systems of work.\nAbility to interpret technical data, drawings, and system documentation.\nStrong organisational, communication, and problem‑solving skills.\nComputer literate with the ability to produce clear technical and condition reports.\n\nDesirable\n\nAuthorised Person status for HV or other critical systems.\nFormal Health & Safety qualification (e.g. IOSH, NEBOSH).\nExperience working within a shopping centre, retail, or other customer‑facing environment.\nExperience supporting refurbishments or fabric improvement works in occupied buildings.\n\nPersonal Attributes\n\nProactive and methodical approach to technical and fabric risk management.\nCalm and decisive under pressure, particularly during incidents affecting public areas.\nStrong attention to detail with a focus on safety, compliance, and presentation.\nCollaborative team player with the confidence to challenge unsafe or non‑compliant practices.\n\nScope & Accountability\n\nAccountable for technical performance, safety, compliance, and condition of site engineering systems and building fabric.\nLine management responsibility for site engineering staff and day‑to‑day oversight of engineering and fabric contractors.\nNo direct responsibility for financial management, budgets, or service charge control

As a PVT engineer you will work on electrical system quality issues affecting the vehicle assembly plant and our external customers the electrical systems, we are responsible for include control modules, software, switches and electrical wiring harnesses.\n\nYou will monitor quality metrics to identify emerging issues, apply problem solving skills to those issues, develop containment solutions and assist developing design change solutions.\n\nIn this way you will be contributing to the delivery of our quality targets for each vehicle line and contributing to the drive to achieve world class performance levels.\n\nEssential Skills Required:\n\n * Use of problem-solving tools and processes\n\n * Knowledge and technical understanding of electrical systems (including control module software and electrical wiring harnesses)\n\n * Capability to use diagnostic tools to interrogate vehicle electrical systems via the CAN network\n\nExperience and Qualifications Required:\n\n * Previous experience of plant vehicle quality operations in production including experience of delivery of problem resolutions in manufacturing\n\n * and/or Previous experience of engineering delivery of electrical systems (including control module software and/or electrical wiring harnesses)\n\nDesirable Experience and Qualifications:\n\n * Microsoft tools (e.g. PowerPoint & Excel)\n\n * Ability to deliver clear, precise technical and metric based presentations to work groups\n\n * Knowledge / ability to use Data Logging tools (such as Corvus, Snapshot, DLT, CANalyser)\n\n * Good understanding of customer quality data systems & metrics (IQM, AWS, VFDB)\n\n * Knowledge and use of CAD systems (such as 3DX, Digibuck, Teamcentre)\n\n * Experience of cross functional co-ordination between engineering, manufacturing, suppliers, service and quality\n\n * Previous knowledge of systems such as WERS, AIMS, JIRA\n\n * Analysis of internal and external quality data, including warranty and road side assist data, to define problem definition statements and develop containment solutions.\n\nIf you are interested and have the skills and experience required Apply Now

Order Ref: (phone number removed) \n\nPosition Title: Electrical Engineering PVT Engineer \n\nDuration: Contract \n\nLocation: Halewood, Liverpool\n\nBased in Liverpool (hybrid working)\n\n£33.88 per hour (Inside IR35), 40 hrs pw\n\n\n\nPosition Description:\n\nThe Electrical Engineering PVT team at the Clients' Halewood assembly plant are part of the product development engineering function. \nThe team operate in an exciting & dynamic environment providing the interface between the core engineering team and manufacturing. \nAs a PVT engineer you will work on electrical system quality issues affecting the vehicle assembly plant and our external customers the electrical systems we are responsible for include control modules, software, switches and electrical wiring harnesses. \nYou will monitor quality metrics to identify emerging issues, apply problem solving skills to those issues, develop containment solutions and assist developing design change solutions. \nIn this way you will be contributing to the delivery of our quality targets for each vehicle line and contributing to the drive to achieve world class performance levels. \n\nEssential Skills Required:\n\nUse of problem solving tools and processes\nKnowledge and technical understanding of electrical systems (including control module software and electrical wiring harnesses)\nCapability to use diagnostic tools to interrogate vehicle electrical systems via the CAN network \n\nExperience and Qualifications Required:\n\nPrevious experience of plant vehicle quality operations in production including experience of delivery of problem resolutions in manufacturing and/or Previous experience of engineering delivery of electrical systems (including control module software and/or electrical wiring harnesses) \n\nDesirable Experience and Qualifications:\n\nMicrosoft tools (e.g. PowerPoint & Excel)\nAbility to deliver clear, precise technical and metric based presentations to work groups\nKnowledge / ability to use Data Logging tools (such as Corvus, Snapshot, DLT, CANalyzer)\nGood understanding of customer quality data systems & metrics (IQM, AWS, VFDB)\nKnowledge and use of CAD systems (such as 3DX, Digibuck, Teamcentre)\nExperience of cross functional co-ordination between engineering, manufacturing, suppliers, service and quality\nPrevious knowledge of the Clients' systems (such as WERS, AIMS, JIRA)\nAnalysis of internal and external quality data, including warranty and road side assist data, to define problem definition statements and develop containment solutions.Why work through Contechs?\n\nContechs is a leading Automotive, Design, Engineering, Technology and Innovation Recruitment Consultancy. Founded in 1997, with an inhouse Contractor Care Team to support all external employees, acts as an employment agency for permanent and contract recruitment.\n\nHow to Apply\n\nIf you're interested in applying for this position, submit your application and one of our recruiters will be in touch.\n\nIf you know anyone that is suitable for the role, please visit the below page where we offer up to £600 referral fee

Join Clarke Energy as an Electrical Design Engineer.At Clarke Energy, our Electrical Design Engineers play a vital role in shaping the energy systems that power hospitals, industry and communities across the UK and beyond.From early concept through to installation and commissioning, youll be closely

🚰 Civil Design Technical Lead | Water & Wastewater 📍 Hybrid | Ilkeston / Apsley / Glasgow 💷 Competitive salary + benifits Are you a civil engineer who enjoys leading design, not just producing it? We’re looking for a Civil Design Technical Lead to take ownership of civil and structural design across water and wastewater treatment projects — guiding solutions from early concept through to delivery and commissioning. This is a hands‑on technical leadership role where you’ll review designs, manage external consultants, and work closely with multidisciplinary teams to deliver safe, sustainable and buildable infrastructure. 🔧 What you’ll be doing: ✔ Leading civil & structural design on complex projects ✔ Managing and reviewing consultant design packages ✔ Collaborating with mechanical, electrical & process teams ✔ Ensuring compliance, buildability and value for money ✔ Supporting projects from feasibility through to commissioning 👷 ♂️ What we’re looking for: ✅ Civil engineering degree ✅ Strong water / wastewater design experience ✅ Confident reviewing consultant work and leading design decisions ✅ Experience with AutoCAD Civil 3D, Revit & BIM environments ✅ Chartered (or working towards) is a plus 🌱 Why join? You’ll be part of a specialist engineering business delivering critical UK water infrastructure, with real technical depth, collaborative teams and clear development opportunities.

Principal Electrical Engineer – Low Carbon Sector: Energy Transition / Power & Infrastructure Location: Remote (UK) with occasional travel to Manchester, London, Newcastle & Glasgow offices Overview We are seeking an experienced Principal Electrical Engineer to join a leading Energy Transition team, supporting the delivery of innovative, low-carbon and energy infrastructure projects across the UK and beyond. This role will involve taking a technical leadership position within a multidisciplinary engineering environment, contributing to projects from early-stage feasibility through to detailed design, construction, and operational support. You will play a key role in developing high-quality electrical engineering solutions across a diverse range of energy sector projects, including emerging and first-of-a-kind technologies. Key Responsibilities • Lead and support the development of cost-effective and innovative electrical engineering solutions across multidisciplinary project teams, • Deliver electrical engineering work across all project stages, including:, • Feasibility studies, • Concept design, • FEED, • Value engineering, • Detailed design, • Develop key electrical deliverables including:, • Single line diagrams (SLDs), • Cable calculations, • Cable block diagrams, • Plant layouts and cable routing designs, • Containment designs, • Switchgear configuration philosophies, • Bills of materials and quantities, • Collaborate with equipment vendors to develop package designs and support technical evaluations, • Support assessment of electrical assets in construction or operation, identifying performance risks and improvement opportunities, • Contribute to proposals, bids, and multidisciplinary tender submissions, • Provide technical leadership within EC&I electrical engineering discipline Required Skills & Experience • Degree or equivalent qualification in Electrical Engineering or related discipline, • Significant post-graduate experience in electrical design, operation, maintenance, or testing, • Chartered Engineer status (or working towards IEng/CEng) with a relevant professional institution, • Strong understanding of power and energy project design, construction, and operation, • Proven ability to develop electrical engineering deliverables or assess operational/installed assets, • Experience with medium and high-voltage systems, including commissioning, operation, maintenance, and testing, • Strong understanding of engineering design processes, including:, • Design scope development, • Engineering calculations, • Technical documentation, • Experience working within multidisciplinary engineering environments Project Scope Projects will support the Energy Transition and low-carbon infrastructure sector, including: • Renewable and low-carbon energy systems, • Power generation and distribution infrastructure, • Industrial and energy process facilities, • First-of-a-kind and emerging energy technologies

Associate HV Power Engineer - Data Centres & Power Sector High Voltage Systems, Substations, Transmission, Distribution, Grid Connections Manchester or Glasgow Competitive salary + employee ownership, benefits and long term progression Full-time permanent role This position sits within the growing UK power division of a major global engineering firm with deep capability in power, data centres, infrastructure and complex buildings. The organisation has a long established reputation in the American market and is now significantly expanding its UK and European presence. The UK power team is building depth across transmission, distribution, substations and grid connection work. This includes internal delivery for hyperscale data centre clients, international power groups and a wider pipeline as they expand further into the DNO, TSO and grid studies environment. The combined scale, technical pedigree and employee ownership model makes this a compelling environment for an ambitious engineer looking to develop into senior leadership. This is a moment in time where strong engineers can step into a team that is gaining momentum and directly influence how capability develops over the coming years. The Business The organisation operates globally across power, data centres, infrastructure and major building programmes. With operations across the United States, the United Kingdom and multiple European regions, the business brings significant global scale and technical depth. The power group is well established internationally with large teams delivering high voltage substations, transmission and distribution programmes, grid connections and power systems studies for utilities, large private clients and major developers. Much of this capability is now being replicated and scaled across the UK. The company is employee owned, financially strong and aligned around long term engineering quality rather than short term commercial pressure. This creates a culture where technical standards, capability building and professional development are prioritised. The Role The Associate Power Engineer role is a key technical and delivery position within the UK power function. It is suited to engineers with strong grounding in high voltage systems such as substation design, transmission and distribution, protection and control, or grid connection studies. Your contribution will support senior technical leaders and help strengthen the division as it grows. You will work closely with internal global power teams, UK project managers and external clients across data centre and power infrastructure programmes. Technical Delivery • Supporting and leading elements of high voltage substation design, physical design, plant layout, earthing, protection and control and transmission or distribution interfaces, • Working on grid connection studies, power systems modelling and technical analysis where relevant to your background, • Producing designs, calculations, specifications and reports to support major internal and external clients Project and Team Capability • Delivering packages of work from concept through to detailed design, • Working with senior engineers to maintain technical quality and alignment with best practice, • Supporting design reviews and contributing to the technical direction of projects, • Helping develop junior engineers and strengthening capability within the UK team Collaboration and Growth • Working with Project Manager’s, Senior Technical Lead’s and wider global power teams, • Building long term relationships with internal and external stakeholders, • Supporting the development of the UK power capability as the division expands, • This role offers a balanced combination of hands on high voltage engineering, delivery responsibility and career development toward senior technical leadership What You Will Bring • Degree qualified electrical engineer, • Strong grounding in high voltage engineering through substation design, grid connection studies, power systems analysis or transmission and distribution design, • Familiarity with IEC, IEEE and relevant design standards, • Experience preparing calculations, designs and technical documentation, • Confidence working with multidisciplinary teams and engaging with clients or internal stakeholders, • A desire to be part of a growing UK division and contribute to long term capability building, • Experience with DigSILENT, IPSA, ETAP or similar tools is advantageous but not essential depending on background This position is suited to an Associate Engineer or experienced Senior Engineer who wants to step into a growing organisation, gain exposure to major data centre and power programmes and develop toward technical leadership. What Is On Offer The role sits within a power business that already has substantial work to deliver. The demand exists today, with internal clients in data centres and global power groups driving a strong flow of projects into the UK. You will join a team that is receiving significant investment in technical capability and leadership as it expands into the wider UK and European market. There is long term opportunity as the division grows from its current size into a larger, self sustaining business unit. You will have the backing of large global power teams, access to established technical standards and a highly collaborative culture shaped by employee ownership. The environment supports professional development, chartership and progression into senior roles as the team expands. For the right engineer, this is a rare chance to join at a formative stage and help build a high quality power engineering capability in the UK. If you’re looking to take the next step in your HV career, get in touch with Dean Forster at Tempest Jones on , or apply now with your CV.

Associate Director Electrical Engineering Hourly Rate: £69.58 per hour Inside IR35 via umbrella (40 hours per week) Location: Epsom, London, Peterborough, Cambridge (hybrid 3 days per week) Term: 6 months Our client are a world-class engineering services and nuclear organization. They connect people, data and technology to transform the world's infrastructure and energy systems. They’re committed to leading their clients across our various end markets to engineer a better future for our planet and its people. We are looking for an energetic and experienced Associate or Associate Director Electrical Engineer to join their team within the Design & Advanced Technology (D&AT) Practice. You’ll be part of a talented, multi-disciplinary team delivering cutting edge, iconic projects to our Water market clients. As a key member of our team, you’ll play a vital role in delivering transformational programmes for critical UK infrastructure, with opportunities to work on landmark engineering projects both domestically and internationally. We offer hybrid working which involves 3 days per week being office/site based. Your Role The role will offer a challenging and rewarding opportunity to apply knowledge, experience, and problem-solving skills whilst providing good opportunities for career development. As an Associate Director Electrical Engineer in the D&AT practice, the successful candidate would have the following responsibilities: • Lead a team of Electrical & ICA engineers for delivery of technical design work on complex multi-disciplinary projects following relevant client and project specific design codes and standards, and to high-quality levels., • Responsible for directing and reviewing technical deliverables such as Single Line Diagrams, Cable Block Diagrams, Load Schedules, MCC specifications, Control Philosophies, Control Network Architecture., • Provide technical leadership into project design deliverables for Electrical aspects of complex multi-disciplinary projects and work with the project management team to successfully manage time and budgets to key project milestones and programmes., • Collaborate with client, operational, project, or service activities within your immediate team, • Provide direction and guidance to Senior and Principal colleagues, • Work independently with minimal technical guidance. Exercise personal judgement to solve difficult problems where appropriate and provide guidance to Senior and Principal team members., • Work closely with multi-disciplinary teams in the UK and overseas to deliver integrated design solutions., • Setting quality assurance standards in design and ensure compliance from Electrical & ICA teams., • Leading business development initiatives to drive growth of water market for our client, • Support leadership and management of the D&AT team within the Manchester office. About You The ideal candidate would be a well-rounded and versatile individual who exemplifies the following key skills and attributes: • A degree in Electrical Engineering or equivalent., • Chartered Engineer., • Proven experience in leading or directing an Electrical & ICA engineering design delivery team for a design consultancy including within a multi-disciplinary environment., • Takes broad perspective to identify innovative solutions to design problems., • Requires comprehensive knowledge and practical experience in Electrical designs., • Extensive knowledge of water company design codes and standards as well as industry best practices, such as WIMES., • Strong awareness of HAZOP assessments, lightning strike risk assessments, earthing and bonding, lighting designs, DSEAR and ATEX installation practices., • Ability to work independently with minimal technical guidance., • Experience in water market is preferred but not required., • Experience in industrial and process environment is essential., • Demonstrates strong communication skills, with the ability to convey technical concepts clearly and effectively within diverse multi-disciplinary teams., • A proactive, highly motivated mindset with a collaborative approach to drive teamwork and shared success across projects.

Fire Alarm Commissioning Engineer UK & Europe (Germany / Norway) · Permanent On-Site | ~£15k OT travelling | Urgent Package UK base salary £35k – £43k Away day rate - Time + a third Accommodation - Fully covered Daily allowances: UK £30 · Europe £40 · Norway £50 About the Company Our client is an industry-leading electrical installation, fire protection, life safety and security systems specialist working within the critical infrastructure market. Headquartered in St Helens with operations across the UK and Europe, they deliver end-to-end services covering design, installation, commissioning and facilities management for data centres and industrial environments. They hold BAFE, NICEIC, FIA, ECA and BSI accreditations and partner with large names like Honeywell & Kentec. With five data centre clients, a rapidly growing contract pipeline and ambitious expansion plans. This is a travelling role - expect roughly three weeks away on European contracts (Germany and Norway) followed by five weeks back on UK sites. Responsibilities • Commissioning addressable fire alarm systems across new and upgraded installations, • Room integrity testing on gas suppression systems (UK and Germany), • Reactive commissioning to client specifications, • Low voltage fire alarm installation and sign-off, • System upgrades and panel changeovers, • Supporting the service team on complex fault resolution, • Working to BS5839 and relevant European standards What we're looking for • Minimum 2 years in a fire alarm commissioning role, • Gas suppression commissioning experience - VESDA systems highly desirable, • Room integrity testing experience, • Familiarity with leading panels: Notifier, Schrack Seconet, Kentec, Tyco, Kidde, • Valid CSCS or ECS card, • Full UK driving licence, no more than 3 points, • Comfortable with regular European travel Desirable • VESDA suppression systems certification, • Electrical HNC or NVQ, • Data centre commissioning experience Why join • High-profile projects - Data centres and critical infrastructure across the UK and Europe., • Progression - Head of Commissioning started as an engineer just 2.5 years ago., • Strong earnings - OT at time and a third when away. ~£15k extra on top of base., • Training funded - The business backs engineers with relevant training and certification. If this sounds of interest, please apply today!

About the Role: We are seeking a dynamic and technically skilled Technical Solutions Manager to join our team specializing in Battery Energy Storage Systems (BESS). This role is pivotal in designing and delivering tailored technical solutions that meet customer requirements while ensuring compliance with industry standards. In this role, you will work closely with customers, internal teams, and stakeholders to ensure project success from inquiry to implementation. Title: Technical Solutions Manager- Energy Storage Systems Job Responsibilities: • Analyze customer inquiries and requirements to design technical solutions for energy storage systems, including BESS, PCS, and EMS components., • Evaluate technical feasibility and optimize solutions for efficiency and cost-effectiveness., • Prepare detailed technical documentation, including specifications, schematics, and configurations., • Develop and submit comprehensive bidding documents and proposals that meet regulatory, technical, and customer-specific standards., • Work closely with cross-functional teams, including sales, project management, and R&D, to align solutions with project goals., • Serve as a technical point of contact for customers during the pre-sales, proposal, and implementation phases., • Contribute to the development of new tools and methodologies for solution optimization. What You'll Need: • Bachelor’s degree in Electrical Engineering, Energy Systems, or a related field (Master’s degree preferred)., • Proficiency in creating technical documentation, schematics, and bidding documents., • Excellent problem-solving skills with a keen attention to detail., • Strong communication skills to convey complex technical concepts to both technical and non-technical stakeholders., • Strong understanding of battery storage systems, power conversion systems, grid integration, and energy management systems is preferred., • Familiarity with system simulation and design tools., • Proficiency in English, both written and spoken, is required to effectively communicate with international teams, customers, and stakeholders.

ROLE: Senior Protection & Control Engineer At Mitie, our people are our greatest strength, and our promise is to create a place to work where you can thrive and be your best every day. We're looking for a Senior Protection & Control Engineer who will lead the technical delivery and design of HV and EHV protection and control systems for renewable and utility‑scale infrastructure projects. Role Responsibilities • Provide day‑to‑day technical leadership and management of a protection and control engineering team, ensuring the safe, reliable and efficient operation of HV and EHV substations up to 400kV., • Lead the design, specification and configuration of complete protection and control systems, including setting project‑specific protection philosophies and ensuring compliance with Grid Code, ENA G99, DNO and TSO standards., • Review tender and contract documentation, define protection scopes of work, and deliver high‑quality technical documentation, drawings and calculations throughout the project lifecycle., • Act as technical authority across projects, resolving engineering challenges, coordinating multi‑disciplinary interfaces, and ensuring “right‑first‑time” delivery aligned with quality assurance processes., • Mentor and develop junior engineers, embed CDM 2015 principles, and promote safety and sustainability by design across all engineering activities. Required Qualifications • Degree, HND or HNC in Electrical Engineering (Power Systems preferred)., • Significant experience (10+ years) designing HV and EHV protection and control systems from 11kV to 132kV and ideally up to 400kV., • Strong working knowledge of British and international standards, including Grid Code, ENA G99, and DNO/TSO requirements., • Proven experience leading or technically managing specialist electrical design teams., • Working knowledge of CDM Regulations 2015 and the designer's role under CDM. What's in it for you? • The opportunity to lead technically complex, high‑impact HV and renewable energy projects., • A collaborative working environment with a strong focus on technical excellence and professional development., • Hybrid working with long‑term career progression in a growing engineering function. There's a place for you at Mitie – join us today!

About Us We are a fast-growing renewable energy developer focused on small-to-medium scale solar projects (1-10MW) across the UK. Backed by a leading global listed energy software corporation, we combine a world-class supply chain with cutting-edge EMS (Energy Management Systems) to deliver premium RTB and Turnkey solutions. We are building our core team to scale our Front-of-the-Meter (FTM) and BTM portfolio. The Role We are looking for a Chartered Electrical Engineer to lead our grid connection strategy. You will be the technical "anchor," ensuring our projects meet all UK regulatory standards (G99/G100) while integrating our advanced Chinese hardware and software solutions into the UK grid. Key Responsibilities • Grid Compliance: Lead G99/G100 applications and manage the full lifecycle of DNO (UKPN, NGED, etc.) coordination from application to commissioning., • Technical Interface: Serve as the primary technical lead for investor due diligence and DNO technical reviews., • Design Oversight: Review SLDs and Protection Relay Settings; ensure EPC designs align with UK standards (BS 7671, BS EN 62109)., • Supply Chain Integration: Work closely with our R&D team to localize inverter and EMS specifications for the UK market., • Project Delivery: Safeguard the grid connection timeline to ensure on-time asset delivery and prevent contractual delays. What You’ll Need • Certification: Must be a Chartered Engineer (CEng)., • Expertise: Deep knowledge of G99, G100, and UK distribution network operations., • Experience: 3-5 years in solar/BESS project engineering (1-10MW scale preferred)., • Mindset: A proactive problem-solver comfortable in a fast-paced, cross-cultural startup environment. Why Join Us? • Direct exposure to the latest AI-driven energy management technology., • Competitive salary and performance-based incentives.

Aventa is seeking, on behalf of our client—a leading developer in the offshore renewable energy sector—a Electrical Design Engineer to join their Engineering Department. This role offers a unique opportunity to work alongside a team of skilled engineers contributing to one of the most significant offshore wind developments in the region. Role Objective • We are seeking a proactive, flexible consultant to support offshore wind farm projects in our client portfolio. You will deliver high-quality power system studies primarily in PSS/E (RMS/steady-state), and PSCAD (EMT), collaborate effectively with cross-functional teams, and adapt to evolving project priorities and workloads. Key Responsibilities • You will support projects at various phases (development, design, execution, and operation) by conducting studies and providing grid-connection support. Scope includes:, • Develop, integrate, and validate EMT and RMS models for relevant assets (e.g., WTG, plant controller/PPC, HVAC/HVDC interfaces, STATCOM/SVC as applicable)., • Plan and execute grid compliance and design studies in PSS/E (load flow, short circuit where applicable, dynamic RMS performance, contingencies, sensitivity studies)., • Plan and execute EMT studies in PSCAD (faults and disturbances, control interactions, protection-related phenomena, insulation coordination, energization, converter/control performance, harmonic/transient behaviour as relevant)., • Work with vendor/OEM models: coordinate provisioning, model validation, parameterisation, updates, version control, and fit-for-purpose application in studies., • Produce clear, audit-ready documentation for internal review and external submission (e.g., grid code evidence packs, study reports, model validation notes, assumptions and limitations)., • Summarise findings and recommend mitigations, ensuring technical quality aligned with Ørsted methodologies and QA processes across multiple projects and stakeholders. Requirements: • Degree in Electrical/Power Systems Engineering (BEng/MSc/PhD) or equivalent experience., • Minimum 5 years’ hands-on experience with PSCAD for EMT studies (including relevant add-ons/modules and analysis workflows)., • Strong, proven experience with PSS/E covering steady-state and RMS dynamic analyses for grid compliance and design work., • Demonstrated experience working with vendor-supplied models (confidential models, black-box components) and parameterisation for compliance evidence., • Scripting/automation skills for study execution and post-processing (e.g., Python for PSS®E, MATLAB/Python for result handling; tooling to improve repeatability and QA)., • Experience coordinating with OEMs for model delivery, validation, and updates; strong data confidentiality practices., • Strong communication skills, able to produce concise technical reports and stakeholder-ready material., • Ability to work independently while following Client established methodologies, documentation standards, and QA processes., • Strong interpersonal skills and good ability to engage and work in and as part of a team. Resources Provided • Client will supply a laptop and all necessary software licenses and access (including PSS/E and PSCAD as required). Engagement Terms • No additional certifications required., • No travel required; the role is fully remote., • Contract basis, billed per hour or per day, • Flexible allocation subject to project demands and priorities.

Senior Digital Design Engineer - UK All candidates must be based or be able to relocate to the UK An innovative semiconductor company developing advanced security IP for next‑generation connected devices is seeking an experienced Digital Design Engineer to strengthen their hardware security development team. The role focuses on designing efficient digital architectures for cryptographic functions, secure subsystems, and hardware trust features tailored for highly resource‑constrained environments. As a Digital Design Engineer, you will work across the full digital design lifecycle, collaborating with hardware and embedded software teams to deliver secure, robust, and efficient hardware implementations. Responsibilities would include: • Develop and verify digital hardware modules for security‑critical applications, optimised for power, area, and memory, • Implement cryptographic algorithms and security primitives in hardware (such as AES, SHA, TRNGs), • Apply secure‑design techniques and side‑channel‑resistant implementation strategies., • Create designs suitable for both ASIC and FPGA targets, • Collaborate with cross‑functional teams to refine system requirements and specifications Required qualifications • Bachelor’s/Master’s in Electrical or Computer Engineering, or related field, • Proven experience in 3+ successful tapeouts, • Strong understanding of cryptographic algorithms and hardware architectures, • Proficiency in Verilog/VHDL, verification methodologies, and timing analysis, • Knowledge of Post‑Quantum Cryptography concepts is highly desirable, • Experience with RISC‑V microarchitectures is highly desirable, • Background in secure hardware architectures such as Root of Trust or Secure Elements is highly desirable, • Strong analytical and problem‑solving abilities This is a great opportunity for a Digital Design Engineer who wants to work on security‑focused hardware developments with real‑world impact across a broad range of embedded and connected devices. If you are interested, then please contact Jordan Browne at IC Resources for more information. Email - Tel - 01189073075 LinkedIn -

Civil Site Engineer- Renewable Energy (Solar & Bess) Various location across the UK About the Company A Leading global EPC and industrial group with a strong presence across the energy and metals sectors. The company has built an excellent reputation in the renewable energy space, delivering large-scale solar, wind, and energy infrastructure projects worldwide. With a significant international project portfolio and a strong track record in engineering, procurement, and construction, they are recognised for executing complex energy projects and supporting the global transition toward cleaner power and redefining the future of energy and resource innovation. They are seeking a number of Site Engineers to support its expanding UK Renewable Energy division with a growing portfolio of utility-scale Solar and Battery Energy Storage (BESS) projects. About the Role We are looking for a proactive Civil Engineer to join our renewable energy team, focusing on the planning, design, and construction of large-scale solar PV projects (5 MW and above). The role involves managing site activities, ensuring compliance with safety, environmental, and quality standards and coordinating with contractors, surveyors, and multidisciplinary teams to deliver projects efficiently and successfully from construction through to commissioning. You will work closely with the Construction Manager, project team, and subcontractors to ensure electrical works are completed safely, on time, and to specification. Key responsibilities will include: • Oversee and manage day-to-day construction site activities to ensure project timelines are met., • Interpret engineering drawings, plans, and specifications to guide site operations accurately., • Ensure all work is carried out in compliance with health, safety, and environmental regulations., • Coordinate with contractors, subcontractors, and project managers to maintain workflow efficiency., • Conduct site inspections and quality control checks to ensure standards and specifications are met., • Monitor project progress and prepare regular reports on timelines, costs, and performance., • Manage site resources, including materials, equipment, and labour allocation., • Resolve technical issues and provide engineering solutions during construction phases. Qualifications required: • A Bachelor’s degree in Civil Engineering / Master’s degree in Civil Engineering The Successful candidate will have: • Minimum 1–3 years of experience in site engineering within the construction or infrastructure sector, • Proven experience working on large-scale infrastructure projects, • Previous employment with a reputable EPC contractor or major infrastructure developer, • Strong understanding of construction processes, site coordination, and engineering standards, • Understanding of health & safety regulations and construction standards., • Strong analytical, problem-solving, and technical reporting skill's, • Strong knowledge of MV/LV systems, earthing, cable installation, and grid connection works, • Excellent use of English, • Construction experience, • Technical competence, • and UK driving licence This is an excellent opportunity to join a growing renewable energy platform within a publicly listed global EPC, offering exposure and clear progression.

Senior EICA Engineer (Contract) – Water Sector An engineering contractor is seeking a Senior EICA Engineer with strong experience in UK water projects to support delivery across multiple frameworks. This is a long term, contract with the option to be outside ir35. Remote workers may also be considered. Key Responsibilities • Produce cost-effective EICA design documentation, • Develop electrical, control, and instrumentation designs, • Conduct site surveys and attend FATs, • Review subcontractor designs and supplier quotations, • Ensure compliance with UK standards, legislation, and specifications, • Prepare technical documentation, equipment requisitions, and installation scopes, • Support construction and commissioning activities Requirements • Extensive experience in UK water sector projects (essential), • 10+ years’ engineering experience, • Strong knowledge of UK standards (including WIMES), • Experience with ATEX, CE marking, and hazardous area installations, • Understanding of HSE and risk management Qualifications • Degree in Electrical, Electronic, or Control Engineering (or equivalent experience) Profile • Strong communicator with a proactive approach, • Experience leading or delegating work, • Safety and client-focused mindset Only those with proof of right to work in the UK should apply for this role.

VGC Group are pleased to be supporting our client, a leading global design and engineering consultancy, who are looking to hire a Principal Electrical Engineer. You’ll be part of a multidisciplinary team delivering cost-effective, efficient and innovative engineering solutions to complex challenges, helping to shape practical, high-quality designs across a wide range of energy projects. This role involves contributing to projects at all stages of maturity, including Feasibility Studies, Concept Design, FEED, Value Engineering and Detailed Design. You’ll take a lead role in developing electrical engineering deliverables and supporting the assessment, optimisation and safe operation of electrical systems across the energy sector. This role is a fantastic opportunity to: • Lead and support the development of practical, cost-effective and innovative engineering solutions in collaboration with wider project teams., • Deliver engineering work across multiple project phases, from early-stage feasibility through to detailed design., • Prepare and develop electrical deliverables including single line diagrams, cable calculations, cable block diagrams, plant layouts, cable routing, containment design, switchgear configuration philosophies and bills of materials/quantities., • Work closely with equipment vendors to develop equipment package designs and participate in technical evaluations of vendor proposals., • Support owners, operators and investors by assessing the condition, performance and risks associated with electrical assets, identifying opportunities and intervention needs., • Contribute to the preparation of proposals and bids for the EC&I discipline and support multidisciplinary tender submissions. We would like to hear from yo if you can offer: • A degree or equivalent qualification in a relevant engineering discipline, supported by significant post-graduate experience in electrical design, operation, maintenance or testing., • Chartered Engineer status or working toward IEng/CEng with membership of a relevant professional institution., • The capability and motivation to take a lead role in developing electrical deliverables or assessing assets under construction or in operation., • Strong knowledge of the design, construction and operation of power and energy projects., • Proven understanding of the design process, including working with scopes, design concepts, calculations and documentation, and/or experience with commissioning, operation, maintenance and testing of medium- and high-voltage systems and equipment.

About the Role: We are seeking a dynamic and technically skilled Technical Solutions Manager to join our team specializing in Battery Energy Storage Systems (BESS). This role is pivotal in designing and delivering tailored technical solutions that meet customer requirements while ensuring compliance with industry standards. In this role, you will work closely with customers, internal teams, and stakeholders to ensure project success from inquiry to implementation. Title: Pre-Sales Technical Solutions Manager - BESS C&I Job Responsibilities: • Analyze customer inquiries and requirements to design technical solutions for energy storage systems, including BESS, PCS, and EMS components., • Evaluate technical feasibility and optimize solutions for efficiency and cost-effectiveness., • Prepare detailed technical documentation, including specifications, schematics, and configurations., • Develop and submit comprehensive bidding documents and proposals that meet regulatory, technical, and customer-specific standards., • Work closely with cross-functional teams, including sales, project management, and R&D, to align solutions with project goals., • Serve as a technical point of contact for customers during the pre-sales, proposal, and implementation phases., • Bachelor’s degree in Electrical Engineering, Energy Systems, or a related field., • Proficiency in creating technical documentation, schematics, and bidding documents., • Excellent problem-solving skills with a keen attention to detail., • Strong communication skills to convey complex technical concepts to both technical and non-technical stakeholders., • Strong understanding of battery storage systems, power conversion systems, grid integration, and energy management systems is preferred., • Familiarity with system simulation and design tools., • Proficiency in English, both written and spoken, is required to effectively communicate with international teams, customers, and stakeholders.

Job Description – IFS System Coordinator This is a hybrid role sitting at the intersection of CMMS system administration and operational resource dispatching for a growing UK solar PV O&M portfolio. The successful candidate will be the central point of coordination between field technicians, subcontractors, and the back-office operations team, ensuring that work orders flow efficiently through IFS and that the right resources are dispatched to the right sites within contractual response and resolution timeframes. The role requires someone who is equally comfortable configuring system workflows as they are making real-time dispatching decisions under pressure. You will play a key part in driving data quality, SLA compliance, and continuous improvement of our IFS CMMS platform. Who are we? Stern Energy operates ground mounted photovoltaic systems for over 450MW in the UK. We are among the largest operators in Europe with activities in 5 countries and over 1.6GW under management. We specialise in delivering revamping and repowering projects to enhance asset performance. How do we work? EXPERTISE, RESPONSE, TRANSPARENCY AND PASSION guide everything we do. We are committed to maximising plant efficiency and long-term performance through a Total Quality approach, combining experience, technical expertise, and nationwide service delivery. Main Responsibilities IFS System Coordination • Own the day-to-day operation of IFS CMMS, including work order creation, lifecycle management, scheduling, and closure across the portfolio., • Construct, maintain and improve asset hierarchies, preventive maintenance plans, and standard job templates within IFS., • Ensure data integrity across all work order records, including fault categorisation, root cause tagging, timestamps, and photo/document attachments., • Support ongoing IFS configuration improvements such as workflow refinements, custom fields, reporting views, and user permission structures., • Act as the first point of contact for IFS-related queries in the O&M module from field teams and office staff, providing training and troubleshooting support., • Coordinate with IT and external IFS consultants on system updates, patches, and integration requirements specific to the O&M module. Planned Maintenance Design & System Configuration (New Projects) • Work closely with the PM team during site onboarding to design scheduled maintenance plans in line with O&M contracts., • Translate contractual maintenance requirements into structured IFS PM schedules and triggers., • Configure maintenance frequencies (annual, bi-annual, quarterly, statutory inspections, manufacturer servicing, etc.)., • Ensure correct generation rules and automatic WO triggers are configured within IFS., • Validate that SLA response categories are accurately assigned at contract inception., • Support go-live readiness by ensuring all PM tasks are correctly loaded and tested prior to operational handover. Resource Dispatching Reactive dispatch: • Receive, triage, and dispatch corrective maintenance work orders to internal field technicians or approved subcontractors based on fault priority, contractual SLAs, resource availability, and geographic proximity whilst liaising with all relevant departments where appropriate. Planned dispatch: • Schedule and build preventive maintenance campaigns, thermal imaging surveys, panel cleaning, and other planned activities, optimising routes and resource utilisation across multiple sites, liaising with the RTLs., • Monitor open work orders daily, chasing overdue tasks and escalating where SLA breach is imminent., • Maintain a live view of field resource availability, skillsets, and certifications to inform dispatching decisions with support of the H&S department., • Communicate clearly with field and office teams on job priorities, access requirements, site-specific risks, and any changes to scheduling. Contract & SLA Awareness • Develop a thorough understanding of the response and resolution timeframes defined in each O&M contract across the portfolio., • Flag and escalate potential SLA breaches before they occur, working proactively with the operations team to find solutions., • Track and report on SLA compliance metrics, contributing to monthly client reporting packs., • Understand the distinction between contractual scope and out-of-scope works, ensuring work orders are categorised correctly for billing and reporting purposes. Reporting & KPIs • Produce weekly and monthly reports on work order volumes, completion rates, SLA performance, backlog status, and resource utilisation., • Identify trends in fault data and repeat failures, feeding insights back to the engineering and asset management teams., • Support the development of IFS dashboards and automated reporting to reduce manual effort., • Contribute to availability and performance reporting by ensuring accurate downtime logging within IFS. Continuous Improvement • Proactively identify inefficiencies in current workflows and propose improvements to processes, templates, and system configuration., • Participate in post-incident reviews and contribute to lessons-learned documentation., • Stay current with IFS product updates and assess new features for applicability to the business. Skills & Qualifications Essential • 2–5 years of experience in a CMMS coordination, field dispatch, or planning role, ideally within renewable energy, utilities, or heavy asset management., • Hands-on experience with IFS (or equivalent enterprise CMMS such as SAP PM, Maximo) including work order management, preventive maintenance scheduling, and asset hierarchy administration., • Demonstrable understanding of SLA-driven service delivery, including response/resolution timeframes, priority classification, and escalation procedures., • Strong knowledge of solar PV system components (inverters, string combiner boxes, trackers, MV switchgear) and common fault types in the field., • Excellent organisational skills with the ability to manage competing priorities across a multi-site portfolio., • Confident communicator who can liaise effectively with field technicians, subcontractors, clients, and internal stakeholders., • Proficient in Microsoft Excel and comfortable working with data extraction, pivot tables, and basic reporting., • Self-motivated with a proactive approach to problem-solving and process improvement. Desirable • Direct experience with IFS Cloud or IFS Applications 10., • Familiarity with SCADA/monitoring platforms used in solar O&M (e.g., INACCESS, VCOM, GreenPowerMonitor, AlsoEnergy)., • Experience producing operational KPI reports and dashboards., • Understanding of UK health and safety frameworks relevant to solar PV sites (CDM regulations, working at height, electrical safety). Reporting directly to Operations Management A great benefit package to include: ▪ Employee Assistance programme ▪ Pension scheme ▪ Length of service policy ▪ Inflation support policy ▪ Refer a friend incentive ▪ Enhanced paternity leave ▪ Medical Cash plan ▪ Team building days ▪ Great company culture and regular social events ▪ Wellness Wednesday – 30 minutes break for mindfulness ▪ Extensive learning and development programme ▪ Regular wellbeing check-ins ▪ Company mobile phone ▪ Company vehicle ▪ 25 days of annual leave plus Bank holidays ▪ TOIL mechanism At Stern Energy, we are deeply committed to promoting equity and inclusion, and we celebrate the diversity of our team—both those who are with us today and those who will join us in the future. We encourage applications from individuals of all backgrounds, regardless of gender, gender identity, national origin, religion, social, cultural, or ethnic background, sex, sexual orientation, age, disability, pregnancy, veteran status, or any other characteristic protected by law. Our hiring decisions are based solely on business needs, job requirements, and qualifications. We strive to be an equal opportunity employer, fostering an inclusive environment where everyone is respected and free from discrimination or harassment.

About the client Our client is a confidential leading international integrated energy company with a global portfolio of offshore deepwater projects. The Basingstoke engineering office is one of the company's key project execution hubs, housing a dedicated Subsea Systems department responsible for delivering complex EPCI contracts across the full project lifecycle — from feasibility through detailed engineering, fabrication, installation, and commissioning — on projects worldwide. Project scope The assignment is based within the client's Basingstoke Subsea Systems department, providing senior technical expertise in Subsea Control Systems across multiple international deepwater EPCI projects. The Senior Engineer covers all engineering phases — from conceptual study and FEED through procurement, fabrication, testing, installation, and commissioning — and acts as the client's Company Representative for all Subsea Control Systems activities on assigned projects. The role requires direct engagement with contractors and vendors, offshore and onshore testing support, and close collaboration with other disciplines within the Subsea Systems department. ℹ The client operates a hybrid working policy: up to 12 working days per month from home are available, enabling approximately 60% remote working. Role overview To provide senior technical leadership for Subsea Control Systems across the full EPCI project lifecycle — from conceptual study through commissioning and handover to operations — ensuring designs meet project requirements, applicable codes and standards, and engineering best practices, while acting as the client's Company Representative on all Subsea Control Systems matters. Reporting line: You will report to the Chief of Subsea Systems and work in daily coordination with the wider Subsea Systems department, interface disciplines, and contractors and vendors throughout all project phases. Key responsibilities Technical design & documentation • Prepare and complete technical documentation for Subsea Control Systems across all project phases: data sheets, functional specifications, preliminary electrical and hydraulic analyses, conceptual study, FEED, tender and contract package preparation, • Ensure Subsea Control Systems designs meet project requirements, applicable codes and standards, and engineering best practices — with a focus on cost and risk reduction, • Prepare and complete large EPCI contracts for Subsea Control Systems across all project phases: feasibility and conceptual study, FEED, call for tender, engineering, procurement, fabrication, testing, installation, and commissioning, • Maintain extensive awareness of international design standards for Subsea Control Systems, in particular API 17F, • Correctly apply company internal standards and HSEQ policies throughout all activities Contractor & vendor management • Follow up supplier calls for tender and selection processes: qualifications, clarifications, and technical recommendations, • Review and approve FEED, tender, and detailed engineering deliverables prepared by contractors, • Supervise contractors and vendors across equipment delivery and engineering deliverables, • Act as Company Representative for all activities related to Subsea Control Systems Testing & commissioning support • Support projects during onshore and offshore testing: Control System FAT, EFAT, integration with DCS/ICCS, • Provide offshore assistance during Control System pre-commissioning activities on board installation vessels, FPSOs, or platforms Cross-discipline collaboration • Collaborate with colleagues within the Subsea Systems department and across interface disciplines throughout all project phases, • Support Design and Safety Reviews, HAZOP, HAZID, and Risk Assessment processes, • Contribute to Umbilical System and Subsea Chemical Injection System design and operation activities Key deliverables • Subsea Control Systems technical documentation delivered on schedule and to the required quality standard across all assigned project phases, • Contractor and FEED deliverables reviewed and approved within defined timescales, • EPCI contract packages prepared accurately and in full compliance with project requirements and applicable standards, • FAT, EFAT, and commissioning support provided on time and in accordance with project schedules, • Company Representative duties performed rigorously across all assigned Subsea Control Systems activities Requirements Education • Minimum BS degree in Mechanical Engineering or related engineering discipline Experience Must-have: • Extensive experience as a Subsea Control Systems Engineer across the full project development lifecycle — from concept development through execution and handover to operations, • Experience in the technical design of Subsea Control Systems from preliminary engineering through detailed design, • Experience in Umbilical System and Subsea Chemical Injection System design and operation, • Experience supervising contractors and vendors across equipment and engineering deliverables, • Experience supporting onshore and offshore project testing: Control System FAT, EFAT, integration with DCS/ICCS, • Experience with offshore assistance during Control System pre-commissioning activities on board installation vessels and/or FPSOs or platforms, • Extensive experience in Subsea Control System design, testing, and commissioning during project execution — considered a major advantage, • Familiarity with the relevant international codes and subsea standards for Subsea Control Systems, in particular API 17F Technical skills • Deep knowledge of Subsea Control Systems design across all EPCI project phases, • Proficient with MS Office; basic knowledge of AutoCAD, • Understanding of electrical and hydraulic analysis applicable to subsea control systems, • Knowledge of HSE and technical risk integration into engineering and project solutions Soft skills • Strong technical authority — able to act as Company Representative and engage independently with contractors and vendors, • Effective collaborator across disciplines and multicultural project environments, • Structured and rigorous approach to documentation and standards compliance, • Fluent English — mandatory

Mechanical Estimator (Trainee to Intermediate Level) About the Role We are recruiting for a Mechanical Estimator, and we are open to appointing the right candidate at any level between Trainee and Intermediate. Whether you are just starting out or already have 1–3 years’ experience, we will tailor responsibilities and development opportunities to suit your level. You will support the estimating team in producing accurate, technically compliant, and commercially competitive tenders for mechanical building services projects. Who is MJ Quinn MJ Quinn is an established national organisation with contracts across the UK and Ireland. Within our Energy and Critical Infrastructure division, we specialise in decarbonisation solutions, solar energy, battery energy storage systems (BESS), high-voltage (HV) engineering, cooling technologies, and the full design and delivery of mechanical and electrical (M&E) commercial installation projects, as well as facilities management. Responsibilities • Assist with or independently prepare mechanical tenders and cost breakdowns., • Interpret mechanical drawings, specifications, and technical documentation., • Support take‑offs, bill of quantities, and cost modelling for mechanical systems., • Research material, labour, and plant costs using supplier quotes and engineering data., • Liaise with suppliers, subcontractors, and internal teams to gather technical and pricing information., • Assess HVAC, pipework, public health systems, and plant equipment for cost and compliance., • Contribute to value engineering exercises and commercial risk assessments., • Assist with tender submissions, clarifications, and documentation preparation., • Develop proficiency in industry‑standard estimating software (training provided). Person Specification We are open to candidates at two levels: Trainee Mechanical Estimator Suitable for individuals early in their career. • Relevant qualification or working towards one (Mechanical Engineering, Building Services, Construction, or similar)., • Basic understanding of mechanical building services (HVAC, pipework, plant)., • Strong numerical skills and willingness to learn technical concepts., • Experience “on the tools” in a mechanical or MEP environment is highly appreciated but not essential., • No previous estimating experience required—full training provided. Intermediate Mechanical Estimator (1–3 years’ experience) For those with technical experience in mechanical estimating or MEP. • Experience producing take-offs, costings, or working within building services engineering., • Ability to interpret technical drawings and specifications., • Good understanding of HVAC, pipework, public health systems, or plant rooms., • Hands‑on mechanical/MEP experience on the tools is preferred and considered a strong advantage. Additional Requirements (all levels) • Strong communication and organisational skills., • Proficient in Microsoft Office, especially Excel., • Ability to work collaboratively and meet deadlines., • Attention to detail and problem‑solving mindset., • Capable of obtaining an enhanced DBS prior to start date., • Legal permanent right to work in the UK.

Job Title: Sr. Solutions Architect Location: Onsite UK, Remote EU About the role: If you are skilled and have experience as a Technical Lead in semiconductor system design and verification, and/or domain expertise in verticals like datacenter, automotive, infrastructure, or in application areas like functional safety, you will play a critical role in providing leadership in applying Baya’s technology to solve customer problems, and drive Baya product and technology forward. You will help understand key system design challenges and help design with and deploy Baya Technologies. You will work closely with our sales and engineering teams to understand customer requirements, troubleshoot technical issues, and deliver customized solutions that exceed expectations. Responsibilities: • Serve as the primary technical point of contact for general or specialized solutions built on Baya technology, providing guidance and support throughout the product development lifecycle., • Assist in the design and implementation of customized solutions to meet customer-specific requirements., • Develop and deliver technical presentations, demonstrations, and training sessions to customers, partners, and internal teams., • Stay current with industry trends, technologies, and standard methodologies to effectively advise customers on product development strategies., • 10+ Experience in designing or supporting complex SoC, from architecture definition to tape-out, addressing implementation challenges on advanced process nodes., • 5+ years of experience in a solution architecture or customer-facing technical role is preferred., • Master’s degree in electrical engineering, Computer Engineering, or related field is preferred., • Understanding of RAS and reliability for enterprise and infrastructure markets is a plus., • Understanding of functional safety standards and certification., • Excellent communication and interpersonal skills, with the ability to effectively engage with customers, colleagues, and partners at all levels. The role will involve travel to customer sites and events

Expert-level PLC/HMI development Siemens TIA PORTAL, experience in delivering machine control software is a must Our client is a leading designer and manufacturer of complex, bespoke automation machinery used across advanced manufacturing sectors. They deliver highly engineered, one‑off automated systems, integrating cutting-edge control technologies, robotics, and precision motion. Due to continued growth and increased project complexity, they are seeking a Principal Software Engineer to lead software delivery across major automation projects. ⭐ Role Overview As the Principal Software Engineer, you will act as the senior technical authority for software across complex automation projects. You will lead software design and implementation, validate Software Design Specifications (SDS), oversee Source Code Reviews (SCRs), and ensure software is delivered to the highest engineering standards. This role is central to successful delivery: you will guide engineers, resolve technical issues, manage task delegation, and ensure best practices are followed from design through commissioning. Key Responsibilities • Lead and oversee all software implementation for major automation projects., • Create, review, and validate Software Design Specifications (SDS) to ensure accuracy and completeness., • Delegate development tasks and maintain oversight of progress, quality, and compliance., • Lead Source Code Reviews (SCRs) across all major software modules., • Drive the software commissioning phase for large/complex systems, integrating software into wider commissioning activities., • Act as the senior engineering authority—troubleshooting, resolving issues, and guiding decision-making., • Mentor, coach, and develop engineers to elevate technical performance standards., • Ensure strict adherence to established development, documentation, and commissioning processes., • Collaborate closely across mechanical, electrical, production, commissioning, and project management functions. Outputs & Deliverables • Software systems delivered on time, to specification, and fully aligned with project standards., • Validated and compliant SCRs, SDS documents, and supporting technical documentation., • Fully commissioned automation systems with complete testing and documentation., • Clear task delegation and consistent technical leadership across software teams., • Occasional on-site support for commissioning, troubleshooting, and customer technical engagement. Required Experience & Skills Essential • Expert experience developing and delivering control software for automated machinery., • Proven leadership delivering major automation software projects end-to-end., • Deep understanding of SDS creation, validation, and project application., • Strong knowledge of automation safety, compliance, and system-level diagnostics., • Expert-level PLC/HMI development across multiple platforms (e.g., Siemens TIA Portal, Rockwell Studio 5000, etc.)., • Strong competence managing commissioning processes and resolving complex issues., • Highly proficient in SCR methodologies and SDS interpretation., • Experience delivering multi‑disciplinary automation projects., • Technical expertise in robotics, vision systems, or motion control tuning., • Familiarity with functional safety standards, compliance frameworks, and software lifecycle management., • Degree in Engineering, Software Engineering, Electrical Engineering, or related field. Collaboration & Reporting Works closely with: Mechanical Engineering, Electrical Engineering, Production & Build, Commissioning, Project Management, and Aftercare/Service Teams.

Site Engineer / Project Engineer (Electrical, OHL, Transmission, National Grid) Transmission, Distribution, OHL Salary: £dependent on experience + benefits + site bonuses Benefits: Company vehicle (for site travel), professional memberships, support toward chartership Location: UK-wide (travel to project sites and office locations as required) Full-time ARCA Resourcing is partnering with an ambitious and fast-growing engineering organisation within the UK construction and energy sector to recruit a Site / Project Engineer. This is a fantastic opportunity for an engineer looking to develop a well-rounded skillset across design, site delivery, and project engineering, working on high-voltage infrastructure and renewable energy projects across the UK. The Role This is a hybrid engineering role combining design coordination, CAD work, project support, and site-based responsibilities. You’ll gain exposure across the full project lifecycle - from early-stage surveys and design through to construction, commissioning, and close-out - supporting the delivery of substations, overhead lines, cable installations, and grid connection schemes. Key Responsibilities • Interface with clients including National Grid and UK DNOs, • Support communication between site teams, design teams, and project leadership, • Coordinate and support topographical, environmental, and utility surveys, • Produce and update 2D and 3D CAD drawings for design and construction use, • Assist with preparation of technical documentation, including method statements and construction phase plans, • Coordinate site logistics, deliveries, and supply chain interfaces, • Assist in managing site activities to ensure safe and efficient delivery, • Liaise with subcontractors, suppliers, and client representatives, • Support implementation of SHEQ (Safety, Health, Environment & Quality) standards, • Contribute to risk assessments, HAZIDs, and constructability reviews, • Ensure compliance with CDM Regulations and site safety requirements, • Proficiency in AutoCAD and relevant CAD software (e.g. Civil 3D, MicroStation), • Understanding of transmission & distribution or renewable energy projects, • Awareness of health & safety legislation, including CDM, • Good communication and stakeholder engagement skills Experience & Qualifications Essential: • Experience on live construction or infrastructure projects in an engineering or supervisory role, • Practical understanding of site-based project delivery, • Full UK driving licence and willingness to travel Desirable: • Experience working on National Grid or DNO projects, • Familiarity with project controls (cost, programme, risk), • Exposure to substations, overhead lines, cables, or grid connections, • Progress toward or holding relevant authorisations (e.g. SR163, Competent Person, NSI8), • Experience with UAV surveys, GIS systems, or digital field tools Why Apply? • Work with a forward-thinking and growing organisation in the energy sector, • Gain exposure across design, site delivery, and project engineering, • Be involved in high-profile UK infrastructure and renewable projects, • Strong support for career development and professional progression, • Competitive salary, benefits, and performance-related bonuses Apply Now If you’re a motivated engineer looking to build a diverse career across project delivery and site engineering, we’d love to hear from you. Apply today through ARCA Resourcing. Please click on the link to apply.

Chronos Energy are looking for a driven Electrical Design Engineer with proven experience in LV and/or HV distribution systems to join our clients growing team in the energy services sector. You could be based in London, Midlands or the North. If you thrive on delivering practical, buildable designs in live environments - this could be your next move. The Role You’ll play a key role in the end-to-end development and delivery of electrical designs, working across: • Energy centres, • Transformers, • CHP systems, • Solar PV, • Standby generation, • Heat pumps, • DNO electricity distribution connections From analysis and concept design through to installation, commissioning, and O&M, you’ll take ownership of projects that deliver real-world energy and carbon savings. You’ll collaborate closely with mechanical and controls engineers, support energy audits with practical solutions, and ensure designs are safe, compliant, and deliverable within live operational environments. What You’ll Be Doing • Developing outline and detailed electrical designs, • Reviewing consultant and subcontractor specifications, • Managing client approvals and third-party compliance, • Liaising with District Network Operators (DNOs), • Ensuring compliance with ENA Engineering Recommendations (P28, P29, G5, G99, G100), • Leading technical discussions to resolve complex challenges, • Supporting sustainable, efficient systems of work, • Participating in site surveys, inspections, and stakeholder meetings, • Managing projects, people, and resources What We’re Looking For • BSc or BEng in Electrical Engineering, • 3–5+ years’ commercial experience, ideally within Energy/SME environments in live buildings, • Strong experience with LV/HV systems, transformers, CHP, solar PV, heat pumps, on-site generation & protection, • Knowledge of CIBSE, HTMs, HBNs, BS 7671, Building Regulations, • Experience working with ENA Engineering Recommendations