Electrical testing jobs in Rotherham - Page 3Create job alerts

Mobile Electrician Solar PV Location: South East London (with occasional travel outside the area) Salary: Up to £45,000 per annum Hours: Monday to Friday, Full Time (PAYE) Benefits: Company van & fuel card provided An established and growing renewable energy and electrical services provider is seeking a skilled Mobile Electrician to join its team. This role focuses on the installation, wiring, testing and commissioning of solar PV systems, alongside general domestic and commercial electrical works. The position primarily covers South East London and North Kent, with occasional travel required to support projects in surrounding areas. The Role You will be responsible for delivering high-quality electrical installations with a strong emphasis on solar PV systems, ensuring all work is completed safely, efficiently and in full compliance with current regulations. Key Responsibilities * Install, wire, test and commission solar PV systems, including inverters and batteries * Carry out AC and DC electrical installations in domestic and commercial properties * Complete general electrical works such as lighting upgrades, EV charger installations and new build wiring * Fault-find, test and commission electrical systems * Carry out Electrical Installation Condition Reports (EICRs) * Read and interpret drawings, schematics and technical documentation * Undertake inspections, maintenance and corrective repairs * Ensure compliance with BS7671, health & safety and quality standards * Communicate professionally with clients, site teams and management * Complete accurate job reports and documentation Requirements * Level 3 Electrical Installation (NVQ or equivalent) * JIB Gold Card (preferred) * Solar PV installation experience or certification (preferred) * 2391 Test & Inspection (preferred but not essential) * 25 years experience as a qualified electrician * Strong knowledge of AC/DC systems and electrical testing * Ability to work independently and troubleshoot effectively * Clean UK driving licence * Ability to pass a DBS check * Physically fit and comfortable working at height and outdoors Location Requirement Candidates should be based in South East London or North Kent, as the majority of work will be within this area, with occasional travel further afield. Whats on Offer * Salary up to £45,000 depending on experience * Monday to Friday working pattern * Company van and fuel card * Full-time, permanent PAYE role * Long-term opportunity within the renewable energy sector JBRP1_UKTJ

Domestic Electric Vehicle Charging Point Installer/Domestic EV Installer/Electrician Exciting opportunity for you to broaden your skills and contribute to the green revolution. This is the perfect time to make the move into this forward thinking and fast-growing sector of the Electrical industry. We are working with the industry leader, with a vision to change the way people drive. They have made it their mission to install a charging point everywhere you park. To make that vision a reality we need the best talent in the industry - a vision Search Energy are proud to support. You will be responsible for installing and maintaining the network of EV Charging Points, in a localised area, while representing the company in a professional manner. Customer engagement and service are as important in this role as the technical skills to complete the installations. A keen attention and focus on Health and Safety is also paramount for our installers. What's in it for you? • Competitive basic salary of £37,300, • Annual £2000 bonus, • Overtime available, • Company hire van and fuel card, • 21 days annual leave plus 8 Bank Holiday days, • Workplace pension, • Be fully competent with completing electrical certificates using digital software, • An understanding of the current regulations and a focus to always remain compliant, • Able to follow safe working procedures., • Level 3 electrical installations qualification, • Installation and termination of SWA cable, • BS 7671 :2018, 18th edition, • Minimum of 2 years Electrical Experience in domestic environment, • City and Guilds EV installation 2919 or equivalent. Search is an equal opportunities recruiter and we welcome applications from all suitably skilled or qualified applicants, regardless of their race, sex, disability, religion/beliefs, sexual orientation or age. JBRP1_UKTJ

Lead Power Electronics Engineer Eastbourne, East Sussex Salary up to £65,000 + Bonus up to 7.5% KO2's client, a well-established and financially stable engineering organisation, is looking to recruit a Lead Power Electronics Engineer to join their engineering team in Eastbourne. This is an exciting opportunity for a highly experienced electronics engineer to take a technical leadership role in the design and development of advanced electronic systems. Due to the hands-on nature of the hardware development and testing, this role is fully onsite in Eastbourne and offers the chance to work closely with multidisciplinary teams across engineering, product management, and operations. As a Lead Power Electronics Engineer, you will play a key role in driving the design, development, and delivery of innovative electronic solutions across multiple product lines. Acting as a senior technical authority within the team, you will guide engineering decisions, ensure best practices in electronics design, and support the successful transition of products from concept through to production. You will work closely with engineers across multiple disciplines, mentor colleagues, and contribute to the delivery of high-performance, reliable electronic systems that meet both business objectives and regulatory requirements. Key Responsibilities • Lead the design and development of advanced electronic systems, ensuring high standards of performance, reliability, and manufacturability, • Maintain awareness of product roadmaps and technology developments, identifying opportunities for innovation and future product improvements, • Integrate advanced electronic techniques and design approaches to enhance product capability and competitiveness, • Ensure a holistic approach to product development, balancing design optimisation with manufacturability, quality, and reliability, • Provide technical leadership and mentorship to engineering team members, promoting best practices and guiding projects to successful completion, • Lead the resolution of complex technical challenges, using structured problem-solving and root cause analysis techniques, • Collaborate with product management and cross-functional teams to define and deliver new product capabilities within project timelines, • Work closely with external suppliers and technical specialists to incorporate new technologies and strengthen the team's knowledge base Skills & Experience Required • Bachelor's or Master's degree in Electrical Engineering, Electronics Engineering, or a related discipline, • Strong experience in electronic circuit design, including both analogue and digital systems, • Significant experience working in global, multi-disciplinary engineering environments, • Expertise in analogue electronics design, including areas such as low-noise amplifiers and RF amplifier design, • Strong understanding of high-speed digital design principles, • Experience designing high voltage electronic circuits and instrumentation, • Experience working with microcontroller-based systems (e.g., ARM, DSP architectures), • Knowledge of high-speed communication interfaces such as I2C, SPI, UART, Ethernet, RS485, RS232, CANopen, and fieldbus technologies, • Experience using schematic capture and PCB layout tools such as Altium or OrCAD, • Experience working within regulated or compliance-driven industries or high-reliability environments (e.g., aerospace, medical, industrial systems), • Understanding of product safety and electromagnetic compatibility standards such as EN 61010, • Membership of a professional body such as the IET, or working toward Chartered Engineer status, • Experience using engineering or product lifecycle tools such as SAP or Silicon Expert, • Experience working within Agile (SCRUM) and Waterfall project management frameworks, • Experience working closely with suppliers and external technology partners Why Join KO2's Client? • Salary up to £65,000 plus bonus up to 7.5%, • Work within a stable and globally established engineering organisation, • Opportunity to take a technical leadership role in complex electronics development, • Work alongside highly skilled multidisciplinary engineering teams JBRP1_UKTJ

Qualified Electrician - Solar PV £40k-£50k Basic Salary (Full Time/Employed) + Company Van + Pension + Benefits Location: - Kent We currently have an excellent opportunity for an experienced and qualified Solar PV Electrician to join a leading client of ours within the renewable energy sector. You'll need to be based local to the Kent area to be considered, and the opportunity is to join our client on a full time and fully employed basis. Job Summary • Responsible for the installation of Solar PV systems, inverters, and battery storage systems., • Carry out inspection, testing and commissioning of new PV systems, including completing relevant certification (MCS, DNO etc)., • Diagnose and repair faults on existing PV systems, including inverter replacements and monitoring issues., • Work together with roofing teams and other trades to deliver efficient installations., • NVQ Level 3 in Electrical Installation or equivalent, • 18th Edition Wiring Regulations (BS 7671), • AM2, Gold Card etc., • Testing experience - City & Guilds 2391 or equivalent is preferred, • Desired - Solar PV / Battery Storage or Renewables experience Qualified Electrician, Solar PV Electrician, Solar Electrician, Solar PV Installation, Battery Storage, Renewable Energy, BS 7671:2018, 2391 Testing & Inspect, JIB Gold Card, AM2, NVQ Level 3 Electrician. INDG JBRP1_UKTJ

Position: Electrician Location: Worthing Salary: £37,500 - £42,500 Our client currently has an opportunity for an Electrician to join their existing team, to work across Sussex. Electrician Job Overview • Carry out planned and reactive maintenance tasks., • Carry out fault finding, testing, repair, and preventative maintenance of electrical building services and equipment., • Carry out Periodic Inspection and Testing and provide Electrical Installation Condition Reports., • Carry out installation works in domestic, commercial and industrial premises., • Hold a full current UK driving licence., • NVQ Level 3 in Electrical Installation including AM2 (or equivalent), • City and Guilds 2391 or equivalent, • 18th Edition qualified, • Based in the Sussex area, • Happy to work in a range of sites, from domestic to commercial settings, • The successful candidate will be required to complete a Disclosure and Barring Service (DBS) check Electrician Salary & Benefits • Basic Salary - £37,500 - £42,500 depending on experience, • Overtime available, • 22 days leave plus bank holidays (rising with service), • Company maintained Van, • Company pension JBRP1_UKTJ

Astute's Power Servicing team is partnering with a well-established critical power company to recruit an Electrical Generator Engineer near Sheffield with UK wide team travel required. The strategically important Electrical Generator Engineer role comes with a salary of up to £40,000 + Van + Bonus + Benefits. If you're a Generator Engineer and are looking to work for an organisation that puts integrity and people at the forefront of everything it does, then submit your CV to apply today. Responsibilities and duties of the Electrical Generator Engineer role Reporting to the Service Coordinator you will: • Carry out generator installations from delivery through to operational sign-off., • Perform major and minor servicing on diesel and gas generators., • Conduct generator load bank testing to verify operational performance., • Deliver diesel fuel to site using a road tow fuel bowser., • Troubleshoot and repair faults on generator mechanical, electrical, and control systems., • Maintain accurate documentation for all repair orders and service activities. We are looking for someone with the following: • Time-served or apprentice-trained electrical skillset with experience working on industrial scale equipment., • 1+ years' experience in generator installation, maintenance, and fault finding., • Strong understanding of diesel and gas generator systems, control panels, and switchgear would be advantageous., • Ability to interpret electrical schematics. The Electrical Generator Engineer role would suit someone who is: • Proactive problem-solver with a practical, hands-on approach., • Strong communicator with the ability to work independently and in a team environment., • Salary up to £40,000, • Generous bonus of up to 20%, • Company van, tools, and PPE provided, • Overtime opportunities and travel allowances, • Training oversees with events paid for, • Strong company culture, • Private Medical and Dental care #LI-WG1 INDPOW Astute People are acting as an employment agency in relation to this vacancy. We do not discriminate on the grounds of age, race, gender, disability, creed or sexual orientation and comply with all relevant UK legislation. We encourage applications from individuals from all backgrounds but candidates must be able to demonstrate their ability to work in the UK. Astute is also committed to the government's Disability Confident Employer initiative. We endeavour to get back to everyone, however, if you have not heard anything after 7 days, please consider your application unsuccessful. JBRP1_UKTJ

Lead Electrician Employment Type Full Time | Permanent Salary Up to £55,000 depending on experience Overview We are seeking an experienced Lead Electrician to support electrical installations across public sector and commercial renewable projects across the UK. The role involves leading small teams on site while remaining hands on with installation works across commercial solar PV projects and associated electrical infrastructure. This position involves Monday to Friday site work with regular staying away depending on project location. A staying away allowance will be provided. Key Responsibilities • Lead electrical installation works on commercial and solar PV projects • Supervise and coordinate electricians and mates on site • Install containment systems including tray, trunking and ladder • Cable routing, pulling, termination and connection of electrical systems • Support testing and commissioning of completed installations • Ensure works are completed safely, to specification and in line with programme • Liaise with site supervisors, project managers and other trades on site Essential Requirements • NVQ Level 3 Electrical Installation • AM2 qualification • ECS Gold Card • Proven experience working as a lead electrician or supervising teams • Strong experience on commercial electrical installations • Commercial solar PV installation experi...

Qualified Electrician Location UK Wide Field Based Employment Type Full Time | Permanent Salary Up to £50,000 depending on experience Overview We are seeking a qualified electrician with commercial solar experience to support electrical installations across public sector and commercial renewable projects across the UK. The role is field based and will involve working on solar PV installations and associated electrical infrastructure. This position involves Monday to Friday site work with regular staying away depending on project location. A staying away allowance will be provided. Key Responsibilities • Carry out electrical installation work on commercial and solar PV projects • Install containment systems including tray, trunking and ladder • Cable routing, pulling, termination and connection of electrical systems • Support testing and commissioning of electrical installations • Work closely with site supervisors and project teams to deliver projects safely and on programme • Maintain high safety and quality standards across all works Essential Requirements • NVQ Level 3 Electrical Installation • AM2 qualification • ECS Gold Card • Proven experience working on commercial electrical projects • Commercial solar PV installation experience • Full UK driving licence • Own vehicle required for travel to sites Desirable Qualifications &bu...

Permanent - £47,154 DN1 37 hours per week MondayFriday Flexible working (core hours 9am5pm) We are supporting a public-sector organisation seeking an experienced Asset Senior Maintenance Engineer to lead on street lighting and highway electrical assets. This is a key technical and managerial role overseeing planned, reactive and statutory maintenance across a large, diverse asset base. Youll be the technical lead for all highway electrical equipment, ensuring legislation, standards and safety obligations are fully met, while also driving improvements across systems, processes and team performance. The post offers the opportunity to shape change within the department and influence future service delivery. Key Responsibilities * Oversee day-to-day and strategic management of street lighting and all associated highway electrical assets. * Act as the main point of contact for all electrical matters within your service area. * Ensure compliance with all statutory duties, including periodic visual/structural inspections, electrical testing, and record-keeping. * Lead a small maintenance team and supervise electrical contractors. * Manage maintenance regimes, works orders, costs, and related KPIs. * Maintain and develop asset records and ensure accurate data input into the asset management system. * Hold and manage budgets relating to electrical testing, condition surveys, high mast lighting and similar asset groups. * Review and sign off electrical works, including checking pass/fail reports from technician tablets and providing the appropriate electrical approval/stamp. * Contribute to policy development, engineering standards and service-wide improvements. * Liaise with internal and external stakeholders on lighting schemes, temporary displays, and energy-efficient projects. * Support accident-damage claims and ensure best value is achieved. * Deputise for senior management as required. About You We are looking for a technically strong and forward-thinking electrical professional with experience in street lighting or highway electrical services. You will also bring solid leadership capability and confidence managing people, systems, and budgets. Essential experience & skills include: * Background in street lighting, highway electrical assets or similar environment. * Strong electrical engineering knowledge an Electrical Supervisor level background is ideal. * Experience supervising electrical contractors and managing asset compliance. * Excellent understanding of Health & Safety, CDM, and statutory obligations. * Experience with asset management systems familiarity with Sinology, I-Aura, or one of the major asset systems. * Ability to drive service improvements and implement change. * Strong organisational and record-keeping skills. * Confident managing budgets and ensuring best value. Sector background: Private or public-sector experience is welcomed. Working Arrangements * 4 days per week office-based is expected. Some remote working can be arranged depending on team needs and diary commitments. JBRP1_UKTJ

Our OEM Client based in Gaydon, is searching for an Advanced Vehicle Efficiency Integration Lead Engineer to join their team, Inside IR35. This is a contract position with a proposed end date of 31st March 2027. Umbrella Pay Rate: £33.64 per hour. Duties: Supporting the Efficiency Product Owner in the delivery of data-driven, intelligent, optimised energy nodes (sources of energy conversion) in pursuit of Vehicle Efficiency attributes (eg. real world and homologated driving range and energy consumption) befitting modern luxury. Collaborating with a wide range of business stakeholders and Engineers during the initial phases of vehicle development. Identifying risks and opportunities in a robust data-driven manner with the purpose of informing and influencing business decisions and engineering direction related to vehicle energy nodes. Key Accountabilities and Responsibilities: Reporting to the Vehicle Architecture's Efficiency Product Owner and working within the JLR Agile operating model, responsibilities will include: • Conducting strategic target setting for the Vehicle Efficiency attribute (including competitive positioning assessment & benchmarking, assessment of fleet compliance requirements, customer feedback data analysis, real-world customer data analysis, reviews of legislative requirements etc)., • Collaborating with energy node owners in influencing and defining strategic technology roadmaps compatible with Vehicle Efficiency attribute requirements and customer trends., • Conducting target compatibility assessment and negotiation between the Vehicle Efficiency attribute and vehicle energy node owners., • Collaborating with tools and methods teams to ensure Vehicle Efficiency attribute development requirements are well defined and aligned with programme objectives., • Coordinating and contributing towards Vehicle Efficiency attribute virtual verifications and data analysis., • Supporting effective Vehicle Efficiency attribute governance throughout vehicle programmes, identifying and making recommendations for how to handle risks and opportunities as they arise., • Where programme delivery imperatives allow, contribute and add value to tools and methods development project work., • Technical understanding of how vehicle energy nodes (road load, propulsion efficiency, electrical loads etc) affect vehicle-level efficiency and driving range., • Significant experience of Vehicle attribute and/or vehicle system delivery., • Strong technical engineering background with evidence of a methodical, structured approach to problem solving., • Strong presentation skills with the ability to use data and visualisations to articulate complex risks, opportunities and recommendations in an easily digestible way., • Good communication skills, with the ability to simplify and articulate complex technical subject matters., • Self-motivated and independent, able to work and deliver value autonomously within JLR's Agile operating model., • Knowledge and/or experience of working with Agile operating principles., • Knowledge of vehicle efficiency legislative homologation/certification methods, processes and implementation., • Educated to Degree level (ideally with a focus on Mechanical or System Engineering). JBRP1_UKTJ

Familiarity with generators and motors is essential, along with expertise in electrical testing standards.

The successful candidate will conduct Electrical Installation Condition Reports and carry out remedial electrical works primarily in commercial spaces. Experience in electrical testing and relevant certifications such as City & Guilds 2391 is required. A leading facilities management provider in the

Calibration Engineer £32,000 - £34,000 (£40,000 OTE) + Training + Progression + Van / Fuel Card + Overtime + Local Patch Field-based (Ideally located: Sheffield, Rotherham, Barnsley, Chesterfield, Doncaster, South Yorkshire and all surrounding) Do you have calibration, precision engineering or measurement experience looking to work for a Global-leading manufacturer offering full training coupled with great progression into more technical roles? This is a great opportunity to work in a Field-based role offering a great on target earnings through development, overtime etc. The company are a specialist manufacturer of Measurement tools and Instrumentation for key industries and blue chip clients on a global basis. This role is due to growth. In this Monday - Friday role, you will be travelling to multiple customer sites calibrating, fault-finding and testing their instrumentation. This will involve Electro-mechanical repairs. You will work on the likes of Calipers, Micrometres and Gauges. This role would suit a Calibration Engineer looking for a Field-based role offering steady progression and training where you can dramatically increase your technical abilities and earnings. The Role: · Calibrating and Testing Instrumentation. · Monday - Friday (flexible working) with a set patch · Also performing Maintenance and Repair work. The Candidate: · Calibration experience (measuring or testing). · Electrical, Electronic or Mechanical background. · Looking for a local field based role. Rise Technical Recruitment Ltd acts an employment agency for permanent roles and an employment business for temporary roles. The salary advertised is the bracket available for this position. The actual salary paid will be dependent on your level of experience, qualifications and skill set and will be decided by our client, the employer. Rise are not responsible or liable for any hiring decisions made by the end client. We are an equal opportunities company and welcome applications from all suitable candidates

Electromechanical Fitter Sheffield £37,000 – £40,000 + Overtime Workshop & Site Based (approx. 60/40 split) We’re recruiting for an experienced Electromechanical Fitter to join a specialist heavy engineering workshop in Sheffield. This role involves stripping, inspecting, repairing and rebuilding large AC/DC motors and rotating equipment for industrial clients. The Role: • Disassembly and inspection of electric motors, • Bearing replacement (including white metal), • Fault diagnosis and root cause analysis, • Basic electrical testing, • Reassembly and preparation for test, • Occasional site work and short stays away when required What We’re Looking For: • Experience with rotating equipment / motor repair, • Strong mechanical fitting background, • Able to read drawings and assess wear/damage, • Comfortable working both independently and in a team, • Flexible for occasional site work, • Overtime available. This is an excellent opportunity to join a well-established engineering business offering long-term stability, varied work and strong earning potential. Apply today or get in touch for a confidential chat

FIELD SERVICE ENGINEER Based: Rotherham with travel Salary: Excellent + Bonus + Vehicle + DIS + Pension A vacancy now exists for a Field Service Engineer, reporting into the Operations Manager, and our client is the UK's leading provider of leak testing and process viscosity solutions. They provide non-destructive scalable air leak and flow testing systems designed for medical device, automotive, EV battery, industrial and packaging applications, and accurate viscosity measurement, even in the most challenging applications. They are the UK’s exclusive supplier of Cambridge Viscosity and Uson products and pioneers of modern leak testing and viscosity measurement. Their team of experts have helped manufacturers around the world bring the highest quality, the safest and the most reliable products to market. There are members of staff who have been employed with the company for over 20 years. In part this is due to a team-based management style, an open-door policy for employees and the ongoing commitment to the growth of the company. The expansion plans are driven by a treble digit growth strategy, and it’s an exciting time to join the organisation and for you to make a difference within the sectors they supply. The Role: • Servicing/calibrating equipment and repairing faults, both in house and in the field, offering telephone support and travelling to UK customers sites., • Using various strategies and tools to provide effective solutions to customers' concerns you will communicate with customers, colleagues and other technicians to ensure that services are delivered effectively., • Maintenance, troubleshooting, repairs, upgrade and calibrate all equipment ensuring proper calibration and working order of instruments and tools needed., • Carrying out planned preventative maintenance and calibration traceable to national standards to ISO 17025., • Monitoring equipment and machinery and conduct quality assurance and safety checks., • Prepare quotations for repairs, calibrations, spare and modifications. Technical support on sales quotations., • Promptly following up on service requests and provide customer feedback providing recommendations about new features and product improvements., • Attending workshops to remain abreast of industry developments you will provide recommendations about new features and product improvements., • Completing service reports and presenting findings to Managers. The Requirements: • Technical qualification with Electro-Mechanical engineering experience ideally with pneumatics, electronics and electrical bias., • An inquisitive Service Engineer who can use various strategies and tools to provide effective solutions to customers' concerns., • Excellent active listening and customer service skills who can promptly follow up on service requests and provide customer feedback., • Communicating with customers, colleagues and other technicians to ensure that services are delivered effectively., • Able to work independently and as part of a team with the ability to deal with multiple requests and remain professional under pressure., • Superb work ethic and a positive mindset., • Flexible for travel to UK customer sites and to the US manufacturers for training. There may be some travel requirements in the EU in the future as the business grows., • Basic computer skills., • Demonstrating a thirst for learning. Full training will be given on the product range. In Return: Excellent salary, annual bonus, company vehicle, DIS, pension, holidays, O/T and subsistence. Onboarding and regular training plan. Standard hours of work are 9am-5pm. There are real opportunities for a talented engineer for career advancement as the company expands. To apply: email your CV to Kendall Poole Consulting Ltd FAO Alison Poole, Managing Director. Suitable candidates will be contacted within 3 weeks

Job Title: Refrigeration Engineer - YorkshireReport to: Service ManagerLocation: Yorkshire, Leeds, Sheffield, Bradford, Doncaster, Barnsley The CompanyEstablished in early 2000's, the business designs, supplies and installs innovative temperature control solutions across the UK. The Sales, Hire and Service teams support customers across a wide range of industry sectors, whether purchasing, hiring or maintaining equipment. With a clear growth strategy in place, the organisation is committed to investing in employee development and training. Due to continued expansion, an experienced and motivated Lead Refrigeration Engineer is required to join the workshop team. The RoleAn experienced Refrigeration Engineer is required to take a key hands-on role within an established service team. This position is responsible for maintaining, repairing and optimising a hire fleet of chillers and refrigeration equipment. Responsibilities will include both minor and major chiller repairs, including: Fault finding and diagnostics Compressor replacements Refrigeration circuit leak testing and repair Component replacement Warranty repair work Performance testing and system commissioning The role also requires maintaining accurate service records, parts logs and warranty documentation, while providing technical guidance and support to junior engineers within the team. Key Responsibilities Lead and carry out chiller repairs, maintenance and warranty work on the hire fleet Diagnose mechanical and electrical faults on refrigeration systems Ensure equipment is returned from quarantine and made operational efficiently Maintain accurate service documentation and technical records Support system testing, commissioning and performance verification Provide technical leadership within the workshop team Ensure compliance with F-Gas regulations and Health & Safety standards Requirements NVQ Level 2-3 (or equivalent) in Refrigeration & Air Conditioning F-Gas Category 1 Certification (essential) Proven experience in commercial or industrial refrigeration / chiller maintenance Strong mechanical and electrical diagnostic skills Methodical approach with strong attention to detail Excellent organisational and record-keeping skills Ability to lead by example and support team development Benefits Salary 43-45K (OTE 50-55k) 1-5 on call (Generous on call payment) Company bonus scheme 25 days holiday + bank holidays Employee benefits platform Gym membership contribution Bike to Work salary sacrifice scheme Employee referral bonus Long Service Awards Sick pay (increasing with service) Discounted legal advice support Private healthcare after 2 years’ service Enhanced pension contribution after 2 years’ service Ongoing technical training and development

Calling all Electricians in South Yorkshire with industrial or heavy industry experience. I am searching for Industrial Electricians for a client based in South Yorkshire who have a full Nationwide Order book and are growing ! The ideal candidate will:- Install, maintain, and repair electrical systems across heavy industrial sites. Work with MCCs, conveyors, motors, control panels, and instrumentation. Carry out fault-finding, testing, and inspections to ensure compliance. Support both planned projects and reactive maintenance work. Must be able to travel to customer sites (overnight stays when attending worksites will be required so flexible to work and stay away is a key part of the role). NVQ Level 3 (or equivalent) in Electrical Installation. 18th Edition Wiring Regulations certification. Electricians who have worked on aggregates, mining, steel, oil/gas or similar heavy industry are preferred Knowledge of control systems, motors, and PLCs (advantageous but not essential). A commitment to safe working practices. Full UK clean driving licence. Competitive salary around £18.50 -20.00 per hour (annual equivalent £48 – 50k) Working 50 hours per week, options for overtime also available to increase salary Fully expensed Company Van Pension scheme. Training & development opportunities to expand your skill set. The chance to work on some of the UK’s most exciting industrial projects. Applicants must have British Passport or valid Share Code / Right to Work in the UK - Please no applications from abroad

Field Service Engineer - Fire & Security Location: Sheffield & Yorkshire region Salary: £30,000-£40,000 DOE + Vehicle + Overtime + Benefits Contract: Permanent, Full -Time A leading national fire & security specialist is seeking an experienced Field Service Engineer to join their growing team in the Sheffield/Yorkshire area. This role offers a mix of installation, service, maintenance and commissioning across fire alarms, emergency lighting and electronic security systems. The Role Install, service and fault-find on fire alarms, intruder, CCTV, access control and emergency lighting Carry out PPM, compliance testing and commissioning Complete digital job reports, handover packs and asset updates Work from drawings/specs and ensure high standards of workmanship Provide excellent customer service and maintain safe working practices Optional callout/overtime available with enhanced rates What You Need Experience with at least three disciplines: Fire / Emergency Lighting / Intruder / CCTV / Access Control Strong fault-finding skills Knowledge of BS 5839, PD 6662/EN 50131, BS EN 62676 (preferred but not essential) Electrical experience Full UK driving licence Desirable: FIA training, ECS/CSCS, IPAF/PASMA. Benefits £30k-£40k basic salary DOE Company van & fuel card Tools, PPE, tablet & phone FIA/manufacturer training 25 days holiday + bank holidays Pension & life assurance Local working patch TPBN1_UKTJ

About the Role: We are seeking an experienced Electrical Site Manager to oversee the delivery of high-quality electrical installations on retail projects. The company is a National M&E Contractor who have continued with their growth over the past few years. This role involves leading on-site operations, managing subcontractors, ensuring compliance with health and safety regulations, and delivering projects on time and within budget. Key Responsibilities: Manage all on-site electrical activities, ensuring quality standards and safety compliance. Coordinate with project teams, subcontractors, and clients to ensure efficient project delivery. Conduct site inspections, manage resources, and maintain project documentation. Oversee testing, commissioning, and handover of completed works. Requirements: Proven experience as an Electrical Site Manager in the retail or commercial sector. Strong leadership, communication, and problem-solving skills. Comprehensive knowledge of electrical systems, regulations, and standards. Valid ECS/CSCS card and relevant electrical qualifications. Full UK driving license. Benefits: Competitive salary and package • Opportunities for career progression Supportive work environment

Senior Control Systems Engineer Sheffield We are now seeking a Senior Control Systems Engineer to join our growing engineering team at our brand-new regional hub in Sheffield. This is a technically focused role, responsible for leading the design, development and commissioning of advanced control and automation systems across a wide range of industries. Key Responsibilities: Lead and contribute to all stages of the project lifecycle, ensuring high‑quality technical delivery. Provide technical leadership, mentoring junior engineers and sharing best practices. Build strong client relationships through effective technical communication, presentations and documentation. Take ownership of technical tasks and projects, delivering to budget, quality, safety and programme expectations. Produce and review specifications, design documents and engineering reports. Develop, configure and implement control system application software across multiple platforms. Conduct testing and commissioning activities in live operational environments. Maintain consistently high engineering standards throughout the design and delivery process. Lead or work within multi‑disciplinary teams, adapting to a variety of environments. Ensure compliance with the company’s Integrated Management System. Contribute to continuous improvement and support the development of the wider engineering community. Skills, Experience & Qualifications: Degree‑qualified in control, automation or electrical engineering (or equivalent proven experience). Member of a relevant engineering or professional body (e.g., MIET); Chartered status desirable. Minimum 6 years’ experience within the control and automation industry. Proven track record delivering control solutions within sectors such as Food, Utilities, FMCG, Process or Materials Handling. Strong technical leadership and project engineering experience. Excellent interpersonal, written and verbal communication skills. Highly motivated, ambitious and capable of operating at a senior technical level. Technology Portfolio (Experience Desired): PLC Control Systems (Rockwell, Siemens, Mitsubishi, Schneider) HMI & SCADA technologies Regional control systems & telemetry Data analysis, reporting & IT/database integration MES platforms Industrial networking Industrial & IT hardware Operational Technology systems Functional safety OT cyber security principles What We Offer Competitive salary 25 days annual leave plus Bank Holidays Enhanced pension contribution Ongoing internal training and Clear career development pathways A supportive employer committed to employee Wellbeing Genuine opportunities for career progression within a growing business Access to employee discount schemes About Us We are MARCH®. The leading provider of critical engineering services. Supporting the industries we all rely on to improve their infrastructure, process, and digital environments. We work together with our customers to maintain business continuity, optimise output, and drive new standards in productivity, reliability, and sustainability. We help deliver operational resilience, increased performance, and better environmental outcomes, across the board. Why March? Progress is People. MARCH has ambitious plans and central to our future growth is attracting, developing and retaining the very best talent. Whether your role is onsite or office-based, engineering or support, we offer opportunities for all our people to develop their careers and maximise their potential. MARCH is committed to building teams that reflect a wide range of backgrounds, perspectives, and experiences. We believe diverse thinking strengthens engineering, and we welcome applications from all backgrounds. If you need any adjustments during the recruitment process, just let the team know

Murphy is a leading international, specialist engineering and construction company founded in 1951 with a purpose to improve life by delivering world-class infrastructure. Operating in the United Kingdom, Ireland, Canada and America, Murphy provides better engineered solutions to infrastructure sectors including transportation; natural resources; energy and water. Headquartered in London, Murphy has a number of related businesses – Ground Engineering; Utility Connections; Murphy Plant; Murphy Process Engineering; Pipeline Testing Services; Specialist Welding Services; and Electrical Services. Murphy is a specialist in delivering pipelines, design, structural steel, tunnelling, fabrication, bridges and piling, and has a substantial holding of plant, equipment and facilities. Murphy employs around 4,000 engineers, professional managers and skilled operatives around the world. Together, they work as ‘One Murphy’ - directly delivering the people, plant and expertise needed to make projects a success. Visit (url removed) or follow us on LinkedIn, Facebook, Instagram and X: #MoretoMurphy A day in the life of a Murphy Senior Quantity Surveyor Ensure the site team adheres to group procedures and governance Management of internal commercial reporting and any other reports which may be required Preparation of Valuations/Applications for Payment with full supporting documentation in accordance with the contract Oversee Cost Reports to the Client with contractually compliant supporting documentation Management of subcontract and material procurement schedules Administration of subcontractor/supplier accounts from the preparation of detailed requisitions, monitoring and authorisation of subcontract payments through to agreement of final accounts Undertake the contract administration, including change management and maintain associated registers Identifying commercial risks, opportunities, value engineering and change Use the cost allocation/coding which satisfies both internal and external requirements Measurement of quantities in accordance with the standard methods of measurement as required Still interested, does this sound like you? HND/Degree qualification Proven experience as a Senior Quantity Surveyor or a times served Quantity Surveyor looking to step up. Solid knowledge across NEC Contracts. Registered with RICS / ICES and working towards chartership. Experience on Civil Engineering and/or Major Construction Projects

Senior Engineer - Industrial Installation & Mechanical/Electrical Projects Location: Based from South Yorkshire (UK & International Travel Required) Salary: £40,000 - £42,000 + Uplifts for Working Away Hours: Project‑based, Mon–Fri with required overtime during major installations About the Role We are seeking an experienced Senior Engineer to lead major mechanical and electrical installation projects across the UK, Europe and occasionally worldwide. The role sits within a specialist engineering firm delivering complex industrial solutions to high‑demand sectors including heavy industry, automation, and large‑scale process environments. You will lead teams on-site, oversee large installations, carry out hands‑on technical work, and communicate directly with clients and project managers. This role is highly practical, requires strong problem‑solving skills, and involves managing both in‑house engineers and subcontractors depending on project size. Key Responsibilities * Lead installation teams (typically 4-5 engineers) under the guidance of the Operations Manager * Hands‑on mechanical and electrical installation including: * Large power cable installs (Apply online only)mm wide) * Cable termination, containment and testing to European standards * Mechanical installation of industrial plant, heavy machinery and structural equipment * Attend morning briefings at the office and allocate workloads for the day * Deliver RAMS, installation reports, updates and client handovers * Maintain strong communication with project managers, clients, and subcontractors * Manage deadlines and ensure installation work meets technical and safety standards * Carry out 70% installation and 30% maintenance on industrial machinery and power systems * Work in glass, metals, automated handling, industrial manufacturing and similar heavy‑duty environments * Support junior engineers and ensure high-quality workmanship on every project Working Away & Travel Expectations * Travel time is fully paid * Working away uplift * +£2ph for work 2 hours away from depot * +£4ph for work in Europe * £25 per day living expenses + fuel card provided * Typical project lengths: 2–4 weeks * Maximum duration: usually 6 weeks, with rotation afterwards * Overseas work approx. 30%, with increasing focus on UK-based projects * Engineers are supported with rest time when needed — fatigue is always considered What We’re Looking For • Minimum Lv 3 Electrical or Mechatronics • Strong background in heavy installation work (mechanical and electrical) • Able to install, terminate and test large power cabling to high standards • Experience in industrial machinery install projects, including heavy equipment • Competent with cable containment, routing, traywork and mechanical fitting • Hands-on engineer who leads by example and isn’t afraid to get stuck in • Experience supervising engineers and subcontractors on-site • Comfortable communicating directly with clients and project teams • Full UK driving licence and willingness to travel across the UK and internationally Benefits • Company vehicle + Fuel card • Strong overtime earning potential (typical OTE around £60k) • Clear progression into higher‑level roles

Estates Group Electrician Hours; Full time (37 hours each week, all year round) Duration; Permanent Salary; £38,810 a year + benefits Location; Multi-Site position (including Rotherham College and Dearne Valley College, Rotherham and North Notts College, Worksop as well as other Group subsidiaries) About the Role We are seeking a proactive and skilled Electrician to join our Estates Department. Reporting to the Director of Estates & Facilities, you will play a vital role in maintaining and enhancing the electrical infrastructure across our multi-site college campus. This is a dynamic, cross-campus position perfect for a solution-focused professional who takes pride in ensuring a safe, compliant, and efficient environment for students and staff. Maintenance & Repair: Diagnose faults and repair/replace wiring, lighting, motors, and fixtures using technical schematics and drawings. Installation & Upgrades: Execute new installations (sockets, control systems) and support a rolling programme of infrastructure upgrades. Testing & Compliance: Lead essential safety checks, including EICRs, PAT, and emergency lighting tests, ensuring all documentation meets regulatory standards. Project Management: Plan electrical improvements and oversee external contractors during major works. Safety & Logistics: Manage hazardous waste disposal and champion safe working practices across all sites. You will be an organized self-starter capable of managing a varied workload across multiple locations. You should have a deep understanding of current electrical regulations and a commitment to maintaining high-quality digital and physical records of all works. This role is a cross campus role requiring you to manage tasks and responsibilities effectively travelling between multiple sites with regular evening and weekend working. You will... • You will hold a Level 2 (or equivalent) qualification in English and Maths (or be willing to undertake). You will hold a recognised industry qualification with proven experience of success in your practical abilities. * You will have experience in electrical, ideally within a commercial or domestic setting. You should have a working knowledge and understanding of BS7671 standards. We understand that no candidate will perfectly match every qualification or criterion listed. If your experience differs from what we've outlined but you believe you can contribute to this role, we encourage you to apply! Department Info The Estates Group Electrician reports into the Director of Estates, Facilities, Health & Safety and Security and will work as part of the estates department. You will liaise with colleagues across all sites, as well as Directors of Campus and the Marketing department. Our excellent benefits and rewards package: • Access to local government pensions scheme (with employer contributions from 17.7% to 23.68%) * Up to 41 days annual leave per year including closure during Christmas period * Access to our gyms, restaurants and salons * Staff health & wellbeing and benefits schemes including in-house Occupational Health service * Extensive wellbeing support through a digital Wellbeing Hub that offers a broad range of support for physical, mental, and financial wellbeing. * Full, part time and flexible working hours available in many roles * Free Parking available at all of our sites * Fantastic career development opportunities including funding for teacher training, apprenticeships and various other industry recognised qualifications * New FE teachers can also apply for grants of up to £6,000 in STEM subjects (conditions apply) through the teacher retention initiative * Recruitment Referral Scheme for all employees, worth £200 per referral made To Apply If you feel you are a suitable candidate and would like to work for RNN Group, please proceed through the following link to be redirected to our website to complete your application.

Alpha Recruitment are looking for a Industrial Electrician to start work for a client in Rotherham S66. Job Title: Industrial Electrician Location: Rotherham , surrounding areas Job Type: Temp to Perm Hourly Rate: £23 -£26 The Opportunity I’m currently recruiting on behalf of a well-established electrical contractor who is securing a strong pipeline of industrial projects across the UK. They’re looking to bring in a reliable Electrician on a temp-to-perm basis, with a view to offering a long-term position for the right person. This role is best suited to someone early in their career who already has experience in heavy industrial environments and is looking to build solid, long-term progression within a growing business. Job Description: Installation of cable infrastructure across industrial sites Supporting electrical installation and upgrade projects Assisting with inspection, testing, and commissioning Working to current wiring regulations and site safety standards Travelling to various UK sites, with occasional working away required Requirements: NVQ Level 3 in Electrical Installation 18th Edition Wiring Regulations 2391 Inspection & Testing (desirable) Previous experience in heavy industrial environments Willingness to travel and work away when required Strong attitude and reliability on site What’s On Offer: Temp-to-perm opportunity with long-term stability Consistent pipeline of industrial work Opportunity to develop into testing/commissioning roles Supportive contractor with ongoing projects Requirements: • PPE, • Valid Photo ID, • Previous experience essential, • Be able to provide 2 references About Alpha: • Weekly pay, • Regular job updates specific to your industry, • Experienced & knowledgeable consultants and most important and honest service To apply for this Industrial Electrician role contact Amelia on (phone number removed) You can register for roles similar and other construction jobs by following this link: (url removed) #AlphaJobs

Do you have a background in electrical engineering where you'd feel comfortable working on bespoke control panels? If so, this could be the ideal role for you! Futures are working with a modern and forward thinking engineering business who are looking to add an Electrical Technician to the team. You need previous experience of assembling electrical related products (control panels, cables, harnesses, looms) in a manual development environment. This is a great opportunity to work within a company that are expanding, have a great atmosphere, and look after their staff. If you've got hands-on electrical experience as a Electrical Technician, Panel Wirer or similar please do apply now! Electrical Technician - Role – Panel Wirer, Electrical Engineer, Sub-assemblies, Looms, Harnesses, Cables, HV, LV, Panels • Control panel layout and assembly. * Produce and install wiring harness and looms. Wiring of control units and interface boxes. * Mechanical assembly, typically extruded aluminium frame assemblies. * Functional testing, onsite commissioning and installations * On site installations, including, electrical installations Electrical Technician - Skills and Abilities - Panel Wirer, Electrical Engineer, Sub-assemblies, Looms, Harnesses, Cables, HV, LV, Panels • Electrical engineering qualification, minimum NVQ level 3 * Experience manufacturing HV harnesses / looms / cables * Experience building control panels or similar. * Producing work to a high-quality standard; replicating this standard on each build Electrical Technician, Panel Wirer, Electrical Assembler, Sub-assemblies, Looms, Harnesses, Cables, HV, LV, Panels If this role appeals please do apply now

Lead Engineer - Wanted - Immediate Start! Location: Midlands Based | Salary: DOE Type: Permanent, Full-Time Are you an experienced Electrician? Regional Recruitment are recruiting for an Lead Engineer to join a professional and growing electrical services company. This is a customer-facing, field-based role requiring a reliable, forward-thinking individual who can work independently and as part of a wider team. You will be responsible for carrying out electrical installation, testing, and fault diagnosis at client sites across the UK, maintaining high standards of safety, compliance, and customer satisfaction Roles & Responsibilities Carrying out electrical installation and testing works at agreed customer sites. Diagnosing and repairing electrical faults efficiently in line with training and company procedures. Working safely in a variety of environments, taking all necessary precautions to prevent danger and avoid injury. Liaising with the Operations Supervisor regarding work schedules and daily activities. Communicating effectively with staff and customers at all levels while on site. Maintaining excellent timekeeping, adhering strictly to start and finish times as detailed in work schedules issued in advance. Proactively identifying and preventing potential areas of customer dissatisfaction, including effective route planning and forward preparation. Maintaining a professional appearance and complying fully with company uniform standards at all times. Demonstrating flexibility and willingness to travel to any destination within the UK, including during emergency situations. Mentoring Apprentices/Trainee Engineers Technical Assistance/Support with difficult faults or Jobs Being willing to work unsocial hours when required, including Bank Holidays. Undertaking any other ad-hoc duties as directed by the company. Requirements As part of the role, you will also be expected to: Complete all required paperwork accurately, efficiently, and on time. Ensure all documentation is submitted to Head Office no later than the following Monday after works are completed. Send all data to the Operations Assistant in the correct format in line with company standards Health, Safety & Compliance All employees are required to: Comply with all employment legislation and relevant codes of good practice. Take reasonable care for their own health and safety and that of others in accordance with the Health and Safety at Work Act 1974 and associated legislation. Co-operate fully with the company and colleagues to ensure statutory and safety requirements are met at all times. Qualifications Essential: NVQ Level 3 in Electrical Installation 17th or 18th Edition Wiring Regulations Level 2 and Level 3 Technical Certificates Desirable: 2391 Testing & Inspection qualification (or 2392, with a booked test date) Gold JIB Card PASMA and IPAF certifications What's on Offer A competitive salary package based on experience. Permanent, full-time employment. Opportunities for training and further professional development. Supportive management and clear communication of work schedules. The opportunity to work with a reputable and professional electrical services provider Next Steps Apply to this Lead Engineer role through this advert. If you would like more information about this role, please contact Margot Chawner in our Construction team on (phone number removed). If successful, you will need to digitally register with our agency (if you haven't already done so). If you have not been contacted regarding your application within 7 days, please assume that you have not been successful. We will, however, retain your application for any future roles for which you may be suitable. About Regional Recruitment This position is being advertised by Regional Recruitment Ltd, an award-winning independent recruitment agency established in 2008.We specialise in permanent, temporary, and contract opportunities across the Commercial, Construction, Industrial, Technology, and Engineering sectors. To explore more roles available across the UK, please visit (url removed) or get in touch with us directly: Telephone: (phone number removed) ✉️Email

Job Title: Product Engineer Location: Sheffield (Hybrid) Salary: Up to £50k (DOE) We’re looking for an innovative Product Engineer to join a rapidly growing technology business. The position will support the scale-up of an existing product while contributing to the development of a new product line. It is a pivotal role within the product lifecycle, offering involvement from early concept through to production. You will work closely with cross-functional teams across engineering, commercial, and operations to ensure successful product development and delivery. Strong organisational and communication skills are essential to collaborate effectively across multidisciplinary teams. About the Role Support New Product Introduction (NPI) activities related to manufacturability, including yield optimisation, cost of goods reduction, test coverage, limit setting, guard banding, and test release Contribute to decisions around development or sourcing of key technologies such as assembly, testing, and burn-in solutions Review and contribute to product reliability test plans Work closely with production test engineering teams to implement product and test solutions at external manufacturing partners Monitor and track product performance against specifications throughout the full lifecycle Support production ramp-up and maintain yield performance across the product lifetime Analyse yield issues, working with subcontractors and internal teams to identify root causes and implement corrective and preventative actions Manage non-conforming materials and support disposition decisions Contribute to failure analysis and resolution of field returns Act as a technical point of contact for external assembly and test partners Carry out product characterisation and testing within a laboratory environment Perform detailed data analysis and reporting About you Degree in Electrical/Electronic Engineering (or equivalent experience) Minimum of 3 years’ experience in a product engineering role Proven experience supporting products through the full NPI lifecycle, from definition to production release Strong communication skills with the ability to work effectively across multidisciplinary teams and stakeholders Experience working with external manufacturing partners or subcontractors Please note we cannot offer sponsorship for the role. If interested, please send over an updated CV

We are looking for an experienced Electrical Testing Engineer to join the Operations Team in an established family-owned business in Leeds (LS11). The Role:Reporting to the Senior Testing Engineer; key responsibilities will be the testing, repai. Our client is a leading manufacturer and supplier of

Job Title: Appointed person with Electrical TestingLocation: CheshireRate of pay: £290 p/day CIS. PAYE Options availableStart date: ImmediatelyWe are looking for an appointed person who holds their electrical testing qualifications for a commercial refurbishment project in Northwich, Cheshire.

Electrical Technician (Compliance Testing)Location: Chesham, High Wycombe + travel across Buckinghamshire, Bedfordshire, Hertfordshire & surrounding counties.

Electrical Testing Engineer (Electrician)Location:Field-Based NationwideJob Type:Full-TimeAbout the Role:We are currently seeking a skilled and motivatedElectrical Testing Engineer (Electrician)to join our growing field-based team. Reporting to the Project Manager, you will play a key role in deliv

Position: Electrical Testing SupervisorLocation: Cambridge Modern, State-of-the-Art BuildingHours: Monday to Friday, 8:00am 5:00pmSalary: £46,000 per annumEmployer: Leading FM Service ProviderAn excellent opportunity has arisen for an experienced Electrical Testing Supervisor to join a leading Fa

A leading compliance specialist company in the UK seeks qualified Electrical Test Engineers to join their dynamic team. This unique opportunity focuses on ensuring client safety and compliance within electrical systems, emphasizing a supportive and team-oriented culture.

A leading construction company is hiring an Electrical Tester for its Wolverhampton site. Responsibilities include surveying and certifying electrical installations, carrying out inspections and tests, and ensuring compliance with safety standards.

Servicing & Aftercare Electrical Testing Engineer. Carry out electrical inspections, testing, fault finding, repairs, and maintenance. City & Guilds 2391 - Testing & Inspection.

A leading engineering company in the UK is seeking an Electrical Technician to support testing and fault identification for rolling stock. The role requires NVQ Level 3 in Electrical or Rail Engineering and offers £25 - £30 per hour. Candidates should possess strong electrical fault-finding skills

We are working with a extremely stable, global leading engineering organisation seeking an Electrical Testing and fixed wirer tester to carry out statutory inspections and electrical testing across a wide range of industrial and commercial environments (never domestic) in the London area. If you are

As an Electrical PAT Testing Engineer, you'll be the backbone of our equipment maintenance and testing operations. Conduct inspection, testing, and maintenance of hire stock electrical distribution units and equipment. Job Advertisement: Electrical PAT Testing Engineer.

Inspection and testing Electrical Engineer In. EICR (Electrical Installation Condition Reports) and Fixed Wire Inspection & Testing across our client sites. We are seeking a qualified and experienced Electrician to carry out EICR (Electrical Installation Condition Reports) and Fixed Wire Inspection

Within this role, you will undertake electrical testing in domestic/ communal areas and carry out any associated remedial works identified. With safety our number one priority, it’s no surprise that our electrical division is all about electrical safety. To work individually or as part of a team u

A leading recruitment agency is seeking an experienced Electrical Testing Engineer for a full-time position in London & South East. You will carry out electrical inspections and testing while providing exceptional service in occupied domestic properties.

A leading engineering consultancy in Greater London is seeking an Electrical Testing and Fixed Wirer Tester to perform statutory inspections and electrical testing in industrial and commercial settings. Candidates should possess the 18th Edition and testing qualifications 2391 or 2394/2395.

A facilities management company is recruiting a Testing Engineer to conduct electrical condition reports and maintenance of fire alarms, emergency lighting, and PAT testing across commercial clients in Southeast London. Responsibilities include testing systems, providing quotations, and rectifying f

A leading electrical services company is seeking a Full-Time Electrician in Greater London. Candidates must hold electrical installation qualifications, have a valid UK Driving License, and a proven track record in domestic maintenance.

The ideal candidate will possess strong fault-finding skills and electrical testing experience. Essential qualifications include NVQ Levels 2 & 3, AM2, 18th Edition, and Inspection & Testing (2391). A well-established maintenance provider in Greater London is looking for an experienced Electrical Ma