Trabajos engineering degree en LiverpoolCrear alertas

This position is responsible for providing technical leadership within the process engineering department for equipment and process design for Seqirus Liverpool’s products ensuring the engineering solutions meet cost, reliability, schedule, and performance integrity requirements. Additionally, this position is responsible for the planning and execution of all process engineering activities from preliminary design to routine manufacturing, coordinated with the project management team, including in-house/plant technical support Responsibilities To act as Lead Process Engineering SME for support of team members in the identification, investigation and provision of compliant solutions and innovations involving: • Process Design, • Design Qualification, Design Review and HAZOP studies, • Lead Process Safety initiatives across supported areas and wider site, championing improvements and knowledge sharing, • Process, equipment & component specification (plant, instrumentation, automation & consumables/disposables), • Change control management, • Input into budget development and securing of Opex & Capex funding, • Automation approach including the Sequence of Operations and FDS definition, • Commissioning, validation and handover (FAT, SAT, FT/Commissioning, IQ, OQ, PQ, CV, CSV) Lead, as a subject matter expert: • Working with the cross-function team, consolidate and refine requirements for process equipment and facilities., • Responsible for preparing technical specifications throughout the procurement process to ensure that the user requirements are met. Negotiates cost delivery and technical/design feasibility with external suppliers., • Responsible for managing delivery, issues and risks arising during the procurement, design, and construction phases of process equipment and facilities., • Collaborate with project manager(s) to determine cost, platform and resource requirements in order to deliver projects on time and within budget., • Participate in resolution of issues such as conflicting design requirements, unsuitability of standard material and difficult coordination requirements., • Coordinate project activities with other operating or engineering units to facilitate participation of appropriate staff in project completion., • Assign tasks to process engineering staff and supervise progress to ensure objectives are being met. Monitor resource loading and prioritise activities to maximise the overall business contribution of the department, using agreed tools and metrics as required. Ensure that customer expectations are met for business KPIs and work priorities including: • savings targets, • on time closure of deviations, CAPAs, change controls, MRFs and regulatory commitments, • project selection & portfolio management To advocate, encourage and enthusiastically adopt a culture of participation, knowledge sharing, involvement, and focus on anticipating and preventing potential problems. Maintain an external focus to ensure industry best practices are incorporated into Liverpool Operations and site technical standards. Uphold and contribute to the development of site engineering standards to comply with regulatory and pharmaceutical industry requirements. Ensure that appropriate standards of GMP, housekeeping, safety and discipline are maintained at all times both within the department and operational areas. Participate in professional organizations to maintain current knowledge of technical innovations. Education Requirements A recognised degree in Chemical/Process Engineering is expected. The candidate will ideally be a Chartered Engineer and fully conversant with application routes and requirements. Experience Requirements 7+ years’ experience, preferably within Biotech/pharmaceutical Manufacturing environments with a specific background in cGMP. CSL Seqirus is part of CSL. As one of the largest influenza vaccine providers in the world, CSL Seqirus is a major contributor to the prevention of influenza globally and a transcontinental partner in pandemic preparedness. With state-of-the-art production facilities in the U.S., the U.K. and Australia, CSL Seqirus utilizes egg, cell and adjuvant technologies to offer a broad portfolio of differentiated influenza vaccines in more than 20 countries around the world. To learn more about CSL, CSL Behring, CSL Seqirus and CSL Vifor visit ___ and CSL Plasma at ___. Our Benefits For more information on CSL benefits visit ___. You Belong at CSL At CSL, Inclusion and Belonging is at the core of our mission and who we are. It fuels our innovation day in and day out. By celebrating our differences and creating a culture of curiosity and empathy, we are able to better understand and connect with our patients and donors, foster strong relationships with our stakeholders, and sustain a diverse workforce that will move our company and industry into the future. To learn more about inclusion and belonging visit Equal Opportunity Employer CSL is an Equal Opportunity Employer. If you are an individual with a disability and need a reasonable accommodation for any part of the application process, please visit ___. Watch our ‘On the Front Line’ video to learn more about CSL Seqirus

Applications Engineer (Electron Microscopy)You will need to based commutable to LiverpoolThere will be some travel throughout the UK and some Hybrid working£55,000 to £60,000 + Start Up Opportunity with potential Share Options in the future + Pension + BenefitsAre you an Applications Engineer with knowledge of Electron Microscopy looking for a unique opportunity for a start-up company where you will play a key role in their ongoing success?On offer is a completely unique and varied position for a company that have built a disruptive solution which can change the industry.This forward thinking company have clear growth plans whilst recently winning a respected industry award for innovation. For the right person there will even be Share Options in the future so you will be rewarded for your contribution to the company achieving its goals.This role would suit someone with Electron Microscopy knowledge who is confident in a customer facing, sales and applications based role. The Role:* Act as the go-to technical contact for customers, supporting them with setup, troubleshooting, and day-to-day use* Run demos, training sessions, and workshops to help users get the most out of the software* Work closely with R&D and sales to turn customer feedback into product improvements and support pre-sales activities* Test new releases, improve documentation, and stay up to date with the latest in electron microscopy * Travel up to 30% with the rest of the time in the Liverpool facility with some hybrid working The Person:* Must have a relevant understanding of Electron Microscopy (SEM, TEM, FIB, or related imaging systems)* Relevant Degree, Masters or PHD in Materials Science, Physics, Materials Science, Biology, Engineering or related field * Excellent problem-solving and troubleshooting skills in both hardware and software contexts* Happy to join a start up with clear financial backing where you will play a huge role in the success of the business Applications Engineer, Engineer, Research Engineer, Support Engineer, Sales Engineer, Sales, Electron Microscopy, Liverpool, Widnes, PrescotReference Number: BBBH271336To apply for this role or to be considered for further roles, please click "Apply Now" or contact Olly Shone at Rise Technical Recruitment. Rise Technical Recruitment Ltd acts an employment agency for permanent roles and an employment business for temporary roles. The salary advertised is the bracket available for this position. The actual salary paid will be dependent on your level of experience, qualifications and skill set and will be decided by our client, the employer. Rise are not responsible or liable for any hiring decisions made by the end client. We are an equal opportunities company and welcome applications from all suitable candidates.

Your new companyA family run company working in mechanical and electrical with a major presence across Liverpool. Working across large portfolios and small bespoke schemes. Sectors mainly worked across include: Healthcare, Education and both public and private clients. Your new roleA MEP Revit technician is needed to join the growing team based in Liverpool using CAD and Revit to produce 2D & 3D models according to the company's data management strategy. • Handle complex drafting assignments under minimum supervision from senior team members., • Create and develop 2D & 3D models and working drawings from sketches or descriptions developed by engineers for MEP systems including mechanical, electrical, plumbing, fire alarm and containment., • Review your own drawings for completeness prior to checking by senior team members., • Maintain all revisions of project drawings., • Minimum of 3 years experience within the UK, • MEP experience for consultancy or a main contractor, • Engineering degree or relevant discipline HNC, • Flexible working, • Progression opportunities Hays Specialist Recruitment Limited acts as an employment agency for permanent recruitment and employment business for the supply of temporary workers. By applying for this job you accept the T&C's, Privacy Policy and Disclaimers which can be found at hays.co.uk

We’re supporting a global life sciences organisation in the search for an experienced Clinical Supply Chain Logistics professional to provide end-to-end logistics oversight for clinical trial supply programs. This role focuses on ensuring the timely delivery of Investigational Medicinal Products (IMP) to support key clinical milestones while coordinating closely with study teams and external partners. Key Responsibilities • Act as the primary logistics contact for assigned clinical studies, • Oversee Stock Transfer Orders (STOs) and global shipment execution, • Monitor and manage urgent or priority clinical shipments, including temperature-sensitive supplies, • Coordinate with study teams, supply managers, and external partners (CMOs, depots, logistics providers), • Identify and resolve logistics risks, delays, or supply issues, • Provide status reporting, risk tracking, and escalation during critical study phases Requirements • Degree in Supply Chain, Life Sciences, Engineering, or related field, • Experience in clinical supply chain or clinical trial logistics, • Strong experience with shipment execution and STO management, • Ability to work in fast-paced, time-critical environments, • Excellent stakeholder communication and organisational skills About Planet Pharma: Planet Pharma is an American parented Employment Business/Agency that provides global staffing services with its head-quarters in Chicago and our EMEA regional office located in Central London. We have invested significantly in creating a robust international platform that enables us to work compliantly in 30+ countries with a current network of 2500+ active contractors globally as well as a very strong permanent / direct hire recruitment offering. Our specialist knowledge and close relationships with our clients and the wider industry really makes us unique in our field. Just recently we were recognised by FORBES as the 17th best professional staffing firm, and have won multiple awards from industry accredited bodies for our commitment to excellence and service delivery. We have extensive functional expertise including: Regulatory Affairs, Pharmacovigilance, QA, QC, Submissions experts, Clinical development, Quality, Biostatistics, and Medical Affairs / Writing. We are an equal opportunities Recruitment Business and Agency. We welcome applications from all suitably qualified candidates regardless of their race, sex, disability, religion/belief, sexual orientation or age. Please click ‘apply’ or contact Finlay Keyworth (Recruiter II) at Planet Pharma for more information: E:

Our client, a global pharmaceutical company, is currently looking for a Clinical Logistics Manager to join their team near Liverpool on a full time, 12-month temporary basis. This role ensures investigational medicines are delivered to study sites on time, supporting key clinical milestones and patient needs. You will act as the central point of contact for logistics activities, coordinating with study teams, supply managers, regional leads, and external partners to ensure shipments move efficiently across global networks. Key Responsibilities • Oversee day-to-day logistics operations for clinical supply programs., • Monitor stock transfer orders and ensure timely shipment execution., • Track shipments and proactively resolve delays or supply risks., • Coordinate urgent and temperature-sensitive deliveries., • Work closely with external partners including CMOs, depots, and logistics providers., • Provide regular updates on shipment status, risks, and priorities. Requirements • Degree in Supply Chain, Life Sciences, Engineering, or similar., • Experience in clinical supply chain logistics and IMP within pharma or clinical trials., • Strong organisational skills and ability to manage urgent priorities., • Excellent communication with global teams and external partners. Park Street People Ltd is an Equal Opportunities Employer. We do not discriminate on the grounds of age, race, gender, disability, creed or sexual orientation and comply with all relevant UK legislation. We are acting as an Employment Business in relation to this role.

Title: Engineering Technician Type: 12 months of Contract possible to get perm Location: Speke Liverpool Pay Rate: £32 per hour inside IR35 via umbrella or PAYE Job Description: The Engineering Technician will be required to perform a broad range of varied planned and unplanned maintenance activities that support the overall team and business objectives. The role holder will operate with a degree of autonomy once relevant training is completed. Responsibilities: Deliver engineering support to customers for planned and unplanned maintenance requirements and • Plan and execute routine work., • Ensure all documentation is completed correctly, accurately in a timely manner and signed by the relevant personnel., • Ensure compliance with HSE regulations., • Be aware of and comply with all operating procedures in all operational areas., • Understand, execute and promote a cGMP compliant culture, ensure the highest standards of housekeeping and safety are applied within their own work area and shared workshop., • Actively promote a safety culture and raise and correct Near Misses/Accident & Incident Reports when required., • Have a good knowledge of SAP requirements, with the ability to demonstrate and coach its basic functions. Qualifications: • Engineering Apprenticeship and preferably HNC/D, • C1 English, • Good standards of numeracy and literacy are essential together with excellent attention to detail., • Development of assessment of competence will be through the completion of the Engineering Multi-skilling training/development programme. This reflects the dual nature of the responsibilities required for the role., • The role holder must have well developed interpersonal and communication skills., • Flexibility and the ability to work under pressure are also essential. A positive and pro-active approach is needed to aid resolution of issues., • Pharma experience (preferable), • FMCG (favourable), • Predominantly Mech but with some electrical experience, • GMP awareness, • Experience with root cause analysis

Technical Manager Location: Hot Water Comedy Club, Blackstock Market, Liverpool Job Type: Full-time, Permanent Hot Water Comedy Club is a multi-award-winning live comedy venue based inside Liverpool’s newest destination, Blackstock Market. We host live comedy up to five nights a week and have been named Best Club and Best Venue, although we try not to brag. We are now looking for an experienced Technical Manager to join our growing team. This is a hands-on role in a fast-paced live entertainment environment, ideal for someone who thrives under pressure, loves live events, and has strong technical and customer-facing skills. The Role You will be responsible for ensuring our shows run smoothly, safely and to a consistently high technical standard. Working closely with performers, production teams and front-of-house staff, you will oversee show operations across multiple performance spaces, from technical planning through to live delivery. Strong organisation, attention to detail and calm decision-making are essential. Comedy moves fast and timing is everything. Key Responsibilities • Lead the technical planning and delivery of a high-volume comedy, music and live events programme, • Oversee all audio, lighting, video and staging operations across multiple spaces, • Act as the main technical contact for visiting performers, agents and touring production teams, • Advance technical requirements and translate briefs into practical, deliverable plans, • Manage load-ins, setups, changeovers, live operation and load-outs, • Supervise and coordinate the in-house technical team during live events, • Train and mentor staff to maintain consistent working practices, • Ensure all technical equipment is maintained, fault-free and show-ready, • Implement and monitor safe systems of work and Health & Safety compliance, • Remain calm under pressure while balancing competing priorities during live shows, • Programme music and live events across all venue spaces, • Work closely with venue management and operations teams to enhance the audience experience Required Experience • Degree in Audio Engineering, Lighting Production or a related field, • Proven experience in a live or broadcast environment, • Strong working knowledge of Midas digital desks, OBS, buses and routing, • Experience with Dante systems, • Experience mixing sound for a variety of bands, • Excellent communication and customer service skills, • Solid understanding of Health and Safety requirements in live venues, • Ability to problem-solve effectively under pressure Working Requirements • Excellent timekeeping, • Availability to work evenings and weekends Desirable Experience • Dante Level 1 Certification, • Knowledge of QuickQ and MagicQ, • Video editing experience, • Previous experience working in hospitality What We Offer • Additional training and development, • Four-day working week, • Discounted drinks and show tickets, • 22.4 days annual leave Additional Information • Six-month probation period with a review at three months, • Interviews held as soon as possible, • Immediate start available

Location: UK - Remote. We anticipate moving to hybrid in the future with occasional in-person collaboration. Start: Target Early Apr 2026 (some flexibility). Compensation: Junior band £26k–£30k & Share options. Formal 6-month review tied to performance & funding with salary uplift. About Us Apoello is a University of Liverpool spin-out building DiaDEM, a platform that accelerates materials discovery with simulation, AI and cloud computing. Find out more at . The Role We are looking for a highly motivated Junior Full-Stack Software Engineer (with a focus on frontend) to join our growing team. This is an excellent opportunity for someone early in their career to contribute across the stack and gain experience in a brand new startup environment. • Lead frontend development: Develop and maintain the frontend using React and TypeScript., • Build backend services: Contribute to our backend architecture. While our target stack includes Python and Go, you'll be able to leverage your experience in any modern backend language (e.g., Node.js, Python, Go) as you get up to speed., • Cloud infrastructure: Deploy and maintain services in the cloud. We primarily prefer Google Cloud, but AWS and Azure experience is highly transferable and acceptable., • Collaborate: Work closely with scientists and engineers to convert research requirements into functional software. Must-Haves • Frontend proficiency: Solid experience with React. TypeScript is strongly preferred, but JavaScript experience is acceptable provided you are willing and able to quickly pick up TypeScript., • Backend adaptability: Experience in any modern backend language (e.g., Python, Go, Node.js) and the willingness and ability to learn Python and Go., • Cloud knowledge: General knowledge and experience working with modern cloud platforms (Google Cloud preferred, but AWS or Azure are perfectly acceptable)., • Engineering standards: Coding best practices including version control, testing, and CI/CD. Nice to Have • Familiarity with Google Cloud Platform (GCP)., • Bonus points for experience with AI, Machine Learning (PyTorch/TensorFlow), LLM frameworks (MCP/Langchain), or scientific Python (NumPy/Pandas)—though this is absolutely not necessary to apply., • Infrastructure as Code., • Degree in CS/Maths/Physical Sciences/Engineering; advanced degrees welcome but not required. What We Offer • Flexible hours; remote-first with future hybrid option., • Above-average holiday allowance and supportive work-life balance., • Meaningful ownership (EMI Share options)., • Impactful work at the intersection of AI and materials science, with both mentorship and responsibility. Apply Apply by sending your CV via email () or through LinkedIn. We’re an equal-opportunity employer and welcome applicants from all backgrounds. Candidates must already have the legal right to work in the UK; we’re not able to offer visa sponsorship for this role. If you need reasonable adjustments during the process, please let us know.

Senior Quantity Surveyor – Defence & Infrastructure Manchester/ Merseyside Full-Time Overview We are seeking an experienced Senior Quantity Surveyor to support the delivery of complex infrastructure and defence-related programmes. This role offers the opportunity to work across large-scale construction and infrastructure projects, providing commercial and cost management expertise throughout the full project lifecycle. Projects typically range from several hundred thousand pounds in value through to major programmes exceeding £200m, across sectors including infrastructure, logistics and defence. Due to increasing project demand, we are expanding the team and looking for individuals who want to develop their careers while working on technically challenging and high-profile programmes. Important: Due to the sensitive nature of these projects, applicants must be sole UK nationality and able to obtain and maintain UK Security Clearance (SC). Location: • Merseyside – approximately 4 days per week on client site, • Ability to travel to other project locations across the UK as required The Role This position offers an opportunity for experienced Quantity Surveyors or Commercial Managers with a background in major infrastructure, construction or civil engineering projects to contribute to high-value programmes within the infrastructure and logistics sector, while also developing experience within the UK defence environment. You will work as part of a collaborative project team, providing commercial insight, cost management expertise and contract administration across the delivery of complex projects. Key Responsibilities Commercial & Contract Management • Provide commercial advice across major infrastructure projects., • Lead procurement activities including tender preparation, evaluation and contract award., • Develop negotiation strategies and establish robust contractual arrangements., • Manage change control processes and contract amendments., • Engage with a range of stakeholders including clients, contractors and design teams. Estimating & Cost Planning • Prepare and review cost estimates for infrastructure and civil engineering works., • Develop cost plans and pricing models aligned with project scope and risk., • Support benchmarking and cost intelligence activities., • Work collaboratively with engineering and project teams to ensure cost-efficient delivery solutions. Quantity Surveying & Post-Contract Management • Administer contracts including valuations, variations and final accounts., • Monitor project costs and performance against approved budgets., • Prepare cost reports and financial forecasts for client review., • Ensure compliance with standard forms of contract including NEC3, NEC4 and JCT. Requirements Essential • Demonstrable experience in quantity surveying or commercial management on major construction, infrastructure or civil engineering projects., • Strong understanding of procurement, contract placement and post-award contract management., • Degree in Quantity Surveying, Commercial Management or a related discipline, or equivalent industry experience., • Experience working with NEC and JCT contracts., • Strong stakeholder management and communication skills. Desirable • Knowledge of UK Government procurement frameworks such as QDC, DSPCR or PCR., • Professional membership (e.g. RICS, CICES or CIPS) or working towards chartership., • Experience using cost management software such as CostX, CATO or advanced Excel., • Experience supporting bid preparation or tender evaluation. Additional Requirements • Willingness to travel to project sites across the UK., • Must be a sole British citizen currently residing in the UK., • Ability and willingness to obtain and maintain UK Security Clearance.

Company Description Since 1984, Adlib has supported the live events industry, theatres, performance spaces, venues, and schools to educate and entertain audiences all over the world. Nearly four decades of experience have enabled Adlib to become one of the most well-known and respected names in the technical services industry. Our Sales & Integration departments can provide professional audio, lighting, video, and stage engineering systems to a wide range of clients. Role Description Estimator - SLAV is a full-time role based in Knowsley. The role involves creating accurate cost estimates for audio, lighting and video projects, collaborating with clients and internal teams to define project requirements, evaluating technical specifications, drawings and preparing comprehensive proposals for prospective projects. Additional responsibility include representing Adlib at tender interview, and pre award meetings providing a professional image and working to ensure the success of proposed quotes and tender submissions. Professional Qualities • Ability to work effectively under deadlines, • Professional demeanour, • Punctuality, • Ability to work both independently and collaboratively, • Positive attitude in high-pressure situations, • Strong attention to detail, • Flexibility and reliability, • Approachable and customer-focused, • Excellent communication and interpersonal skills to collaborate effectively Skills & Qualifications • Proficiency in using tools or software for estimation-related tasks, • Proficient in Microsoft 365 systems,, • experienced in Microsoft projects is an advantage,, • A degree or relevant professional certifications in engineering, technical production, audio visual or a related field is an advantage, • Strong analytical, research, and problem-solving skills, • Technical knowledge of audio, lighting and video systems., • Proficiency in cost estimation and budgeting of stage engineering systems and projects. Experience • Previous experience in audio, lighting or video systems construction, installation and operation is an advantage.

Company Description Since 1984, Adlib has supported the live events industry, theatres, performance spaces, venues, and schools to educate and entertain audiences all over the world. Nearly four decades of experience have enabled Adlib to become one of the most well-known and respected names in the technical services industry. Our Sales & Integration departments can provide professional audio, lighting, video, and stage engineering systems to a wide range of clients. Role Description Estimator - Stage Engineering is a full-time role based in Knowsley. The role involves creating accurate cost estimates for stage engineering projects, collaborating with clients and internal teams to define project requirements, evaluating technical specifications, drawings and preparing comprehensive proposals for prospective projects. Additional responsibility include representing Adlib at tender interview, and pre award meetings providing a professional image and working to ensure the success of proposed quotes and tender submissions. Professional Qualities • Ability to work effectively under deadlines, • Professional demeanour, • Punctuality, • Ability to work both independently and collaboratively, • Positive attitude in high-pressure situations, • Strong attention to detail, • Flexibility and reliability, • Approachable and customer-focused, • Excellent communication and interpersonal skills to collaborate effectively Skills & Qualifications • Proficiency in using tools or software for estimation-related tasks, • Proficient in Microsoft 365 systems,, • experienced in Microsoft projects is an advantage,, • A degree or relevant professional certifications in engineering, technical production, or a related field is an advantage, • Strong analytical, research, and problem-solving skills, • Technical knowledge of stage engineering systems,, • Proficiency in cost estimation and budgeting of stage engineering systems and projects. Experience • Previous experience in stage engineering or automation systems construction, installation and operation is an advantage.

Clinical Supply Chain Logistics Manager Location: Moreton (50/50 hybrid working) Duration: 12 months Pay rate: £34 per hour PAYE Position Summary: • Provide end-to-end hyper-care logistics oversight for assigned clinical supply programs, ensuring uninterrupted and timely delivery of Investigational Medicinal Products (IMP) to support critical clinical trial milestones., • Act as the single point of contact (SPOC) for logistics-related activities for designated studies, coordinating closely with Study Teams, Regional Delivery Leads (RDLs), Trial Supply Managers (TSMs), and external partners., • Proactively manage priorities, urgencies, and exceptions during high-risk or critical phases (e.g., database lock, study start-up, major transfers), with a strong focus on execution, escalation, and transparency. Duties / Responsibilities: Hypercare Logistics Oversight • Provide day-to-day operational oversight of all logistics activities for assigned clinical supply programs., • Monitor and manage Stock Transfer Orders (STOs) across internal and external networks, with heightened attention to urgencies and prioritized shipments., • Actively drive shipment execution, including pushing releases and shipments to meet study timelines. Program & Study Interface • Serve as the primary logistics interface for Study Teams, RDLs, and TSMs, ensuring clear two-way communication., • Liaise with study stakeholders to resolve logistics issues, provide timely status updates, and obtain required information to unblock execution., • Ensure alignment with study priorities, enrolment needs, and clinical milestones. STO & Shipment Monitoring • Perform continuous monitoring of all STOs (internal and external depots), identifying risks related to availability, release, transport, or handovers., • Track shipment progress and intervene proactively in case of delays, deviations, or exceptions., • Coordinate urgent and priority shipments, including temperature-sensitive or patient-critical deliveries. External Partner Coordination • Follow up closely with external partners (e.g., CMOs, packagers, depots such as Catalent) on transfer timelines, release readiness, and shipment execution., • Actively manage delays or constraints, escalating as needed to maintain supply continuity., • Ensure logistics execution is aligned with agreed service levels and study priorities. Release & Timeline Alignment • Stay closely aligned with TSM teams on release timelines to enable timely shipment execution., • Anticipate downstream logistics impacts of release delays and proactively define mitigation actions. Monitoring, Reporting & Escalation • Provide weekly hyper-care status reporting, including STO health, shipment execution, risks, mitigations, and prioritization., • Maintain clear visibility of open issues, critical paths, and escalation items., • Escalate risks, delays, or systemic issues in a timely manner to relevant governance forums and leadership. Qualifications: • Bachelor’s degree (or equivalent) in Supply Chain, Life Sciences, Engineering, or a related field., • Proven experience in clinical supply chain logistics operations, preferably in a global clinical trial environment., • Strong hands-on experience with STO management, shipment execution, and issue resolution., • Experience working with external partners (e.g., CMOs, depots, logistics providers) is strongly preferred.

Aureos are a leading specialist engineering and construction services group, focused on building and infrastructure projects around the UK. We are a privately owned enterprise, committed to delivering exceptional quality and value, based on a unique set of self-delivery capabilities, including: design, engineering, offsite manufacturing, and complex construction. Aureos Highways work collaboratively with our clients, self-delivering critical road and major highways infrastructure across the UK. About the Role Working within Aureos Highways Business Unit, and forming a part of the Operational team, the Sub-Agent plays an integral part during pre-construction phase in refining our construction phase delivery plan and mobilizing for construction, including programme; cost; quality; supply chain procurement; safety and PCF governance. In addition, there are major utility diversions planned that you will be responsible for delivering. This role allows the Sub-Agent to be involved in the pre-construction planning of the works delivery and then rolls into the construction phase to allow this planning to be delivered. Location is flexible and subject to on-site activity during pre-construction phase. You will be expected to be and then At this stage we are flexible with work location, however you will need to be mobile frequent site located Key responsibilities include: • Working collaboratively with the wider team to refine the construction phase delivery plan, optimizing construction programme; develop efficient, lean delivery methodology; effective risk and opportunity management etc, • Assisting in the mobilization for construction phase including preparing PCF Products, RAMS and other site documentation, • Overseeing major utility diversions, • Growing and managing the engineering team, • Ensure compliance with construction drawings and record any variances, • Overseeing quality control, • Ensure Site diaries and allocation sheets are produced, • Keep contemporary records, • Monitor subcontractor and supplier performance, • Attend weekly site meetings, • Coordinate with the design manager to ensure that the design activities are visible and that all activities are aligned to support the programme, • Regular review of the Cost to Complete with the project managers/quantity surveyors, • Framework Management - Overall performance of the RDP and CWF, ensuring that requirements are delivered, and best-practice is consistently adopted across delivery teams. Working with and supporting teams to embed changes and improvements to processes; Ensuring resource is allocated appropriately; NH forums are attended, key messages are cascaded and initiatives and best practice is implemented in key areas, including: Health, Safety and Well Being; Customer relations and customer experience; Stakeholder management; Portfolio Schedule Management; Production management including LEAN; Coordination of BIM and document control; Quality management (RFT); Performance management incl CPF and Design Management., • Strengthen Client Relationships - Ensure compliance with divisional & client procedures, policies and actions arising; Attend Client meetings as necessary, drive to promote healthy working relationship; Ensure RDP Scorecard measures are monitored and targets achieved; develop and manage relationships with the National Highways team, including the maximisation of future opportunities. Maintaining records in CRM; Encourage and support the delivery of successful collaborative planning with the contract delivery teams; Attendance at Project lessons learnt meeting, • Health, Safety and Environmental leadership - Lead by example, set the highest possible standards of leadership in promotion of HS&E best practice, ensuring compliance with company procedure, policy and legal obligations. Promote Near Miss and Positive Intervention reporting. Undertake Health and Safety tours and engage with site teams to actively promote the right behaviours and culture., • Staff Recruitment and Career Development – ensuring delivery teams have the right level and competency of resources, • Business Development – work collaboratively with teams from the wider group to ensure compliance with companywide policies and procedures and growth targets are delivered About You: Previous experience undertaking a similar, relevant engineering management role delivering National Highways projects/ frameworks would be desirable. Preferably a member of relevant professional institution and have a Bachelors or Masters Degree in relevant engineering subject. proven engineering management experience gained across a range of infrastructure projects in a multi-disciplinary environment. Furthermore, we are looking for someone that: • Takes responsibility for overall performance of the National highways Framework, • Can identify best-practice and areas for improvement, develop and deliver improvement plans, • Has good verbal and written communication skills, • Will challenge, support and guide teams to improve performance and embed new, better ways of working, • Has excellent organizational skills and can work under pressure, • Has a growth mindset and looking to improve business-as-usual processes, • Can undertake Design Managers duties for highways detailed design, • Understands and can adopt LEAN practices across teams In return you will receive. • Generous Salary, • 25 days Holiday with the option to buy more, • Pension, • Cycle to work scheme, • Health & wellbeing programme, • Employee benefits portal., • On-site parking, • Private medical insurance, • Referral Scheme Equal Opportunities Aureos are an equal opportunities employer and we are determined to ensure that no applicant or employee receives less favourable treatment on the grounds of gender, age, disability, religion, belief, sexual orientation, marital status or race, or is disadvantaged by conditions or requirements which cannot be shown to be justifiable

Intertek, a leading provider of ATIC (Assurance, Testing, Inspection and Certification) Services, for its Industry Services Division is looking for a QC Coordinator for a major 2 years long project based in Liverpool bay. The selected profile will assure quality in all facilities execution activities, verifying they all meet the required quality standards, coordinating all the quality control related activities, auditing vendors and contractors and coordinating with third party authorities for quality validation/certification. Responsabilities: • To verify that the requirements of the Project Quality Plan are satisfied by project/facilities execution activities, making sure project technical integrity is met., • Develop a Project/Package Quality Control System, • Conduct Management Reviews to implement and continuously improve the Project/Package Quality Control System., • Ensure a proper reporting on Quality Control data., • Provide support for the adequate and continuous assessments of the Quality capabilities and performances of contractors., • Engineers and Inspectors) within Construction Sites and workshops., • Develop QC procedures and forms required for inspection, release and non-conformance management., • Ensure availability of and adequate number of resources and with adequate skills., • Verify that all Quality Control verifications are performed in accordance with the approved Inspection and Test Plans., • Review and approve Contractors and Vendors quality plan, relevant quality control plans and procedures making sure they are in compliance with Company requirements., • Participate to Vendor Pre-Production meeting., • Carrying out technical audits to Vendors and Contractors., • Dealing with third party validation and certification authorities., • Manage and administer contracts for provision of Quality Control Services., • Provide reports as required to management on QC related matters and advise on any critical issues arising relating to QC., • To establish and assign to the project all resources for executing QC activities Requirements: • Engineering Degree (Civil, Mechanical, Electrical Engineering or equivalent) or Technical Diploma, • At least 7 years of Oil & Gas Industry experience., • At least 5 years of quality assurance and control experience or equivalent, • Professionally qualified quality system certifier (preferred)., • Accreditation in QA/QC Codes and Standards (cswip, asme, aws nace, iso..).

Aureos are seeking a sub agent to work at our site in Castlegate and an agent to work at Liverpool. Aureos are a leading specialist engineering and construction services group, focused on building and infrastructure projects around the UK. We are a privately owned enterprise, committed to delivering exceptional quality and value, based on a unique set of self-delivery capabilities, including: design, engineering, offsite manufacturing, and complex construction. Aureos Highways work collaboratively with our clients, self-delivering critical road and major highways infrastructure across the UK. About the Role Working within Aureos Highways Business Unit, and forming a part of the Operational team, the Sub-Agent plays an integral part during pre-construction phase in refining our construction phase delivery plan and mobilizing for construction, including programme; cost; quality; supply chain procurement; safety and PCF governance. In addition, there are major utility diversions planned that you will be responsible for delivering. This role allows the Sub-Agent to be involved in the pre-construction planning of the works delivery and then rolls into the construction phase to allow this planning to be delivered. Location is flexible and subject to on-site activity during pre-construction phase. You will be expected to be and then At this stage we are flexible with work location, however you will need to be mobile frequent site located Key responsibilities include: • Working collaboratively with the wider team to refine the construction phase delivery plan, optimizing construction programme; develop efficient, lean delivery methodology; effective risk and opportunity management etc, • Assisting in the mobilization for construction phase including preparing PCF Products, RAMS and other site documentation, • Overseeing major utility diversions, • Growing and managing the engineering team, • Ensure compliance with construction drawings and record any variances, • Overseeing quality control, • Ensure Site diaries and allocation sheets are produced, • Keep contemporary records, • Monitor subcontractor and supplier performance, • Attend weekly site meetings, • Coordinate with the design manager to ensure that the design activities are visible and that all activities are aligned to support the programme, • Regular review of the Cost to Complete with the project managers/quantity surveyors, • Framework Management - Overall performance of the RDP and CWF, ensuring that requirements are delivered, and best-practice is consistently adopted across delivery teams. Working with and supporting teams to embed changes and improvements to processes; Ensuring resource is allocated appropriately; NH forums are attended, key messages are cascaded and initiatives and best practice is implemented in key areas, including: Health, Safety and Well Being; Customer relations and customer experience; Stakeholder management; Portfolio Schedule Management; Production management including LEAN; Coordination of BIM and document control; Quality management (RFT); Performance management incl CPF and Design Management., • Strengthen Client Relationships - Ensure compliance with divisional & client procedures, policies and actions arising; Attend Client meetings as necessary, drive to promote healthy working relationship; Ensure RDP Scorecard measures are monitored and targets achieved; develop and manage relationships with the National Highways team, including the maximisation of future opportunities. Maintaining records in CRM; Encourage and support the delivery of successful collaborative planning with the contract delivery teams; Attendance at Project lessons learnt meeting, • Health, Safety and Environmental leadership - Lead by example, set the highest possible standards of leadership in promotion of HS&E best practice, ensuring compliance with company procedure, policy and legal obligations. Promote Near Miss and Positive Intervention reporting. Undertake Health and Safety tours and engage with site teams to actively promote the right behaviours and culture., • Staff Recruitment and Career Development – ensuring delivery teams have the right level and competency of resources, • Business Development – work collaboratively with teams from the wider group to ensure compliance with companywide policies and procedures and growth targets are delivered About You: Previous experience undertaking a similar, relevant engineering management role delivering National Highways projects/ frameworks would be desirable. Preferably a member of relevant professional institution and have a Bachelors or Masters Degree in relevant engineering subject. proven engineering management experience gained across a range of infrastructure projects in a multi-disciplinary environment. Furthermore, we are looking for someone that: • Takes responsibility for overall performance of the National highways Framework, • Can identify best-practice and areas for improvement, develop and deliver improvement plans, • Has good verbal and written communication skills, • Will challenge, support and guide teams to improve performance and embed new, better ways of working, • Has excellent organizational skills and can work under pressure, • Has a growth mindset and looking to improve business-as-usual processes, • Can undertake Design Managers duties for highways detailed design, • Understands and can adopt LEAN practices across teams In return you will receive: • Generous Salary, • 25 days Holiday with the option to buy more, • Pension, • Cycle to work scheme, • Free parking, • Health & wellbeing programme, • Employee benefits portal, • Referral Scheme Equal Opportunities Aureos are an equal opportunities employer and we are determined to ensure that no applicant or employee receives less favourable treatment on the grounds of gender, age, disability, religion, belief, sexual orientation, marital status or race, or is disadvantaged by conditions or requirements which cannot be shown to be justifiable

About the Role: We are seeking a dynamic and technically skilled Technical Solutions Manager to join our team specializing in Battery Energy Storage Systems (BESS). This role is pivotal in designing and delivering tailored technical solutions that meet customer requirements while ensuring compliance with industry standards. In this role, you will work closely with customers, internal teams, and stakeholders to ensure project success from inquiry to implementation. Title: Pre-Sales Technical Solutions Manager - BESS C&I Job Responsibilities: • Analyze customer inquiries and requirements to design technical solutions for energy storage systems, including BESS, PCS, and EMS components., • Evaluate technical feasibility and optimize solutions for efficiency and cost-effectiveness., • Prepare detailed technical documentation, including specifications, schematics, and configurations., • Develop and submit comprehensive bidding documents and proposals that meet regulatory, technical, and customer-specific standards., • Work closely with cross-functional teams, including sales, project management, and R&D, to align solutions with project goals., • Serve as a technical point of contact for customers during the pre-sales, proposal, and implementation phases., • Bachelor’s degree in Electrical Engineering, Energy Systems, or a related field., • Proficiency in creating technical documentation, schematics, and bidding documents., • Excellent problem-solving skills with a keen attention to detail., • Strong communication skills to convey complex technical concepts to both technical and non-technical stakeholders., • Strong understanding of battery storage systems, power conversion systems, grid integration, and energy management systems is preferred., • Familiarity with system simulation and design tools., • Proficiency in English, both written and spoken, is required to effectively communicate with international teams, customers, and stakeholders.

We’re looking for a Machine Learning Research Engineer to join an early-stage quantum computing start-up developing full-stack photonic quantum systems. This role sits at the intersection of advanced ML research and applied engineering, focusing on generative algorithms and hybrid quantum-classical models. You’ll work closely with clients and partners to show how ML and quantum technologies can solve real-world challenges. Responsibilities: • Design, implement, and evaluate new machine learning algorithms, particularly generative models (GANs, flow models, diffusion models) and hybrid quantum-classical neural networks., • Partner with clients to translate practical problems onto the company’s quantum hardware and deliver solutions that demonstrate value., • Expand and improve the company’s software platform with new algorithms, example applications, and research-driven features., • Support scientific innovation by publishing findings and helping safeguard intellectual property. Required Skills & Experience: • Proven experience building and testing machine learning algorithms., • Hands-on experience with GANs, diffusion models, or flow-based generative models., • Strong programming skills in Python, PyTorch, and version control (Git)., • Advanced degree (Master’s or PhD) in Computer Science, Physics, or a related technical field. Preferred Skills: • Experience working with specialized computing hardware (HPC, NPUs, ASICs, or quantum processors)., • Multi-GPU training experience., • Publication record in ML or AI research., • Comfortable presenting and collaborating with clients or stakeholders., • Familiarity with quantum computing principles. Why Join: This role offers the chance to work on cutting-edge ML research applied to quantum hardware, delivering impactful solutions that move from concept to real-world implementation. The position provides hybrid flexibility in London and direct exposure to pioneering quantum technology.

Role - Mechanical Design Engineer Location - Bristol ( Hybrid ) I am currently working with a leading engineering and project delivery company that specialises in delivering complex, high-specification environments across sectors including pharmaceuticals, life sciences, advanced manufacturing, and technology facilities. Due to continued project growth, they are looking to appoint a Mechanical Design Engineer to support the design and delivery of technically challenging projects, working as part of a multidisciplinary team across the full project lifecycle. Responsibilities • Deliver mechanical design solutions for building services systems, with a focus on HVAC, • Produce detailed design calculations, specifications, and technical documentation, • Develop and review technical drawings using tools such as Revit and AutoCAD, • Support projects from concept design through to installation, commissioning, and handover, • Collaborate with electrical, process, and construction teams to ensure integrated design delivery, • Participate in design reviews, risk assessments, and value engineering activities, • Ensure designs comply with relevant regulations, standards, and client requirements, • Support client interactions and provide technical input throughout project delivery, • Contribute to the continuous improvement of design processes and standards Qualifications • Degree in Mechanical Engineering or Building Services Engineering (or equivalent), • Experience in mechanical design within a consultancy or design-led environment, • Strong understanding of HVAC and building services systems, • Proficiency in design software such as Revit, AutoCAD, or similar, • Experience working on complex or regulated projects (e.g. pharmaceutical, cleanrooms, life sciences, data centres) is advantageous, • Good knowledge of UK design standards and regulations, • Strong communication skills and ability to work within multidisciplinary teams Looking forward to hearing from you!

Commissioning Engineer - Remote (UK-Based) - Global Travel Required Are you an experienced Commissioning Engineer ready to take on a global challenge? We are looking for a motivated and technically skilled individual to join our dynamic team, delivering world-class process engineering projects across EMEA, APAC, and beyond primarily in the food & beverage industry. What You’ll Do: Depending on project needs, you may be deployed as a Process Commissioning Engineer, Commissioning Team Leader: • Lead Installation and Operational Qualification (IQ/OQ) activities on client sites worldwide, • Commission and start up process plants, including utilities, MCC panels, instrumentation, and control systems, • Troubleshoot mechanical, hydraulic, thermal, and electrical issues on-site, • Manage and coordinate commissioning teams and contractors across complex, multi-disciplinary projects, • Deliver customer training and support first production runs, • Produce detailed commissioning reports and weekly project updates, • Ensure strict compliance with health, safety, and contractual requirements on every site What We’re Looking For • Degree-level qualification in Engineering, Food Technology, or Dairy Technology (or equivalent), • Minimum 4 years’ experience in Process Engineering or Commissioning roles, • Strong technical skills across mechanical, electrical, and instrumentation disciplines, • Excellent communication skills in English (spoken and written), • Confident working autonomously on international sites and managing stakeholder relationships, • Full willingness to travel globally — role requires approximately 80% travel Working Pattern: Remote-based in the UK with approximately 80% global travel. You’ll work across EMEA and APAC regions, spending extended periods on client sites as projects demand.

Our client is looking for a Solutions Architect based in the UK to join a growing technical team focused on designing automation solutions for warehouse and distribution environments. This remote position will play a key role in supporting customers through the evaluation, design, and implementation of technology solutions that improve operational efficiency within retail, wholesale, and e-commerce fulfilment operations. Working closely with commercial teams, customers, and implementation partners, you will help develop scalable automation concepts that combine robotics, software platforms, and data-driven analysis to enhance warehouse performance. Key Responsibilities • Support pre-sales activities including site visits, discovery sessions, technical demonstrations, and solution presentations., • Work with customers and internal teams to develop automation concepts tailored to specific operational requirements., • Participate in the design and development of warehouse automation solutions from initial concept through to detailed design., • Collaborate with sales, engineering, product, and delivery teams to ensure solutions are aligned with customer objectives., • Produce technical documentation including data analysis, layout drawings, equipment specifications, and proposal materials., • Analyse operational data such as order profiles, SKU characteristics, inventory levels, and throughput requirements to inform system design., • Translate analytical findings into clear visual summaries and operational recommendations., • Develop labour modelling and productivity benchmarks using established industrial engineering methods., • Create simulation or modelling tools to test and validate proposed operational designs., • Build financial justification models that demonstrate the commercial impact of automation investments., • Coordinate internally across technical and commercial stakeholders during complex sales opportunities., • Support project implementation by working alongside delivery teams to ensure design intent is achieved., • Contribute insights from customer engagements to help inform future product development and solution improvements., • Represent the organisation at relevant industry events and customer workshops. Requirements • Bachelor’s degree in Engineering, Supply Chain, Industrial Engineering, or a related field., • Approximately 6+ years of professional experience, including several years working within warehouse operations, supply chain consulting, or automation solution design., • Strong experience analysing operational datasets such as order data, SKU characteristics, storage strategies, and throughput analysis., • Ability to lead customer-facing technical discussions and workshops., • Strong written and verbal communication skills with experience presenting technical concepts to both operational teams and senior stakeholders., • Practical understanding of warehouse operations within retail, wholesale, or e-commerce fulfilment environments., • Experience applying industrial engineering techniques to develop productivity models or labour standards., • Familiarity with warehouse software systems such as WMS or related execution/control platforms., • Experience defining material handling or automation system requirements., • Ability to build financial models and business cases supporting technology investments., • Comfortable managing multiple projects and priorities in a fast-moving environment., • Willingness to travel within the UK and occasionally internationally as required.

What are we building? Hard Rock Digital is a team focused on becoming the best online sportsbook, casino, and social gaming company in the world. We're building a team that resonates passion for learning, operating, and building new products and technologies for millions of consumers. We care about each customer's interaction, experience, behavior, and insight and strive to ensure we're always acting authentically. Rooted in the kindred spirits of Hard Rock and the Seminole Tribe of Florida, the new Hard Rock Digital taps a brand known the world over as the leader in gaming, entertainment, and hospitality. We're taking that foundation of success and bringing it to the digital space — ready to join us? What's the position? We are looking for a Senior Backend Engineer to join our new Quantitative Sports team. As a Senior Engineer you will play a critical role in the development and maintenance of the backend aspects of the pricing system for our sportsbook and work alongside our quantitative analysts to deliver our in-house pricing solution. This position will be able to come in and have a lot of ownership of the shape of the backend implementation. Because we operate with a startup mindset, we will be reliant on your technical skill, but also your passion and ownership over all aspects of your work. Key Responsibilities: • Significantly contribute to efforts on a scalable platform designed to perform reliably under intense user and data load, • Be a contributor in architecture discussions regarding the pricing platform, • Be a contributor to the drive to reduce the latency within the system, • Ensure a full testing structure is in place to create confidence and resilience in the system, • Foster team collaboration and knowledge sharing, • Work closely with the quantitative developers to ensure best practices and alignment within the wider department, • Build operational tools and applications to support teams as required What are we looking for? • Minimum 8+ years of engineering experience, • Deep proficiency in Python, especially around backend development, • Experience working in a low-latency platform, • Experience of working in a multi-feed ingestion architecture, • Experience with Micro-Service and Service oriented architectures, • Experience in deploying and managing cloud-based systems and infrastructure (AWS), • Experience with different databases:, • Relational (Postgres, MySQL, etc), • Analytical (Snowflake, Clickhouse), • Strong knowledge of messaging systems (Kafka, RabbitMQ) and pipeline architecture, • Excellent communication skills, with the ability to explain complex technical concepts to both technical and non-technical stakeholders, • Self-driven, meticulous, and ability to prioritize in a complex and fast-paced environment Qualifications: • Bachelor’s Degree (or higher) in Engineering, Computer Science or other related scientific, technical or business discipline, • Minimum of 8 years job related experience Preferred: • Experience within the sports betting industry, • Understanding of pricing engines, trading algorithms, or live odds generation., • Strong interest in sports and sport analytics, • Knowledge with game state feeds such-as Radar & Genius What’s in it for you? We offer our employees more than just competitive compensation. Our team benefits include: • Competitive pay and benefits, • Flexible vacation allowance, • Flexible work from home or office hours, • Startup culture backed by a secure, global brand, • Opportunity to build products enjoyed by millions as part of a passionate team Roster of Uniques We care deeply about every interaction our customers have with us and trust and empower our staff to own and drive their experience. Our vision for our business and customers is built on fostering a diverse and inclusive work environment where regardless of background or beliefs you feel able to be authentic and bring all your talent into play. We want to celebrate you being you (we are an equal opportunities employer)

Job title: Highways Design Engineer Type: Contract Location: UK wide Salary: Dependent on experience, skills, and location An introduction to our unique company… Waterman Aspen welcomes engineers and technical specialists to make their mark by working on some of the biggest infrastructure projects or in delivering professional services across the UK. We specialise in secondment services, providing the right people, with the right skills for the job, at the right time. Our diverse client base includes local authorities, consultancies, public bodies, and construction companies. We take pride in supporting our colleagues throughout their careers. We’re a people-centric organisation, placing mutual respect and dignity in the highest regard. This is reflected in our approach to issues such as mental health and wellbeing, family friendly policies, social value, and net zero. We’re a Disability Confident Employer and an accredited Real Living Wage Employer. We have big ambitions for the future, and we’d love for you to be part of it. Your career with Waterman Aspen… You’ll get all the benefits of being employed by us, while working on a variety of projects for our clients. Joining Waterman Aspen as Highways Design Engineer will see you as a key member of the London North team and you can expect: • A varied client base where you can apply and develop your skills, • Buy-in from clients to assist in your technical progression, • Further exposure to your chosen industry - increasing your awareness, knowledge and sharpening your skills, • The flexibility to broaden your horizons with each new secondment, without changing your employer, • Career development and training to reach your professional or academic qualification goals supported by our own network of mentors and managers, • Paid subscription to a professional body of your choice, • Regular social events and volunteering opportunities Experience required… • Design and construction experience in highways, • commercial awareness, • Working knowledge of Local Authority and national design standards and contracts, • Working knowledge of CDM (Construction Design Management) regulations, • Ability to contribute to engineering projects with values exceeding £1m from initiation through to completion with support of a senior engineer., • Computer literate particularly Microsoft Excel and Word, • Experience of the NEC suite of contract documents, • Knowledge of highway design guidance and standards including DMRB, Manual for Streets, LTN 1/20, TSRGD, MCHW and other relevant codes of practice and design standards, • Ability to compile specifications and Bills of Quantities (BoQ), • Proficient in AutoCAD (Civil 3D experience would be advantageous) Essential: • Educated to HND or degree level in civil engineering BEng/Meng (or equivalent), • Hold or be working towards an appropriate professional qualification (IEng / CEng etc).

Associate Mechanical Engineer (Management Role) About the Role: As an Associate Mechanical Engineer, you will work across a range of projects throughout EMEA while acting as a key member of the management team. This role requires a proactive problem-solver who can apply current technologies and make independent technical decisions in a fast-paced environment. You will be an experienced engineer with strong commercial awareness, collaborating with colleagues to ensure high standards in design processes and engineering delivery. About You: • Hybrid working arrangement based in UK or Ireland, with office attendance as required, • Honours degree in Mechanical Engineering (Chartership advantageous but not essential), • 10+ years’ experience within mechanical engineering, ideally in data centres, industrial, high-tech, or commercial sectors, • 3+ years’ experience managing multidisciplinary teams, • 3+ years’ project management experience across mechanical and electrical projects, • Strong communication, presentation, and organisational skills, • Ability to engage effectively with stakeholders at all levels, • Passion for innovation and adoption of emerging technologies, • Review technical designs to ensure scope and intent are fully understood, • Optimise project functionality and cost efficiency, • Ensure effective collaboration between mechanical and electrical disciplines, • Lead and develop a high-performing team, ensuring QA/QC and delivery targets are met, • Monitor project costs and identify opportunities for savings, • Support resource planning, including outsourcing where required, • Interpret contracts and ensure compliance with terms and conditions, • Engage with senior leadership on industry trends and new technologies, • Support business development and new project acquisition, • Build and maintain strong relationships with clients, suppliers, and partners, • Contribute to internal quality assurance standards and processes, • Oversee delivery of multiple large-scale projects, • Conduct team development through regular reviews and mentoring, • Support training and performance improvement initiatives, • Modern office environment designed for collaboration and wellbeing, • Strong focus on professional development and career progression, • Flexible working hours, • Annual leave increasing with service, • Pension scheme, • Travel expense support, • Cycle-to-work or travel schemes, • Ongoing training and education support, • Chartership support, • Private healthcare contribution, • Professional membership fees covered, • Paid statutory leave, • Health screenings and vaccinations, • Gym or fitness support, • Referral bonus scheme, • Active social and wellbeing programme

ROLE – Mechanical Fitter SALARY - £35,000- £45,000 per annum (dependent on experience) TYPE - Permanent LOCATION – Liverpool My client provides bespoke products and engineering solutions for Manufacture. They are looking for a Mechanical Fitter to join their team in the Liverpool area on a permanent basis. The Mechanical Fitter will ideally have the following attributes: HNC / HND / BTEC / NVQ / Degree qualified in Mechanical Engineering or similar 2 or more years’ industry experience ideally working in a hands-on manufacture/assembly role Ability to read and work to technical drawings Excellent proficiency with CAD software – ideally SolidWorks or similar Basic understanding of electrical systems Good mathematical and general engineering knowledge Knowledge of manufacturing processes and materials – sheet metal, castings, machining etc. Be technically minded and proactive, with a head for problem solving Self-motivated with excellent attention to detail Have excellent communication skills both verbal and written The Mechanical Fitter role will involve: Mechanical assembly of various products, parts, components and machinery Working to company standards for test and repair Maintaining equipment and machinery Performing development activities and finding new mechanical solutions Being involved in the product design and development process using CAD Producing the re...

⚡ Electrical Engineering Expert – AI Projects | Up to $55/hr | Remote & Flexible hackajob is collaborating with a leading client in the AI space and is looking for experienced Electrical Engineering professionals to contribute to exciting project-based AI opportunities. This is project-based work — not permanent employment — giving you the flexibility to contribute on your own schedule while working on meaningful, well-compensated tasks. What You'll Be Doing • You'll help build and validate engineering problem sets used to train and evaluate AI models:, • Designing original computational engineering problems that simulate real-world electrical engineering workflows, • Creating problems that require Python (or equivalent) to solve engineering calculations and simulations, • Ensuring problems are computationally intensive and require numerical methods or iterative solutions, • Developing problems involving system design, optimisation, and analysis, • Verifying solutions using Python and standard engineering libraries (NumPy, SciPy, Pandas, etc.), • Documenting problem statements clearly with verified correct answers Who We're Looking For ✅ Degree in Electrical Engineering or a related field ✅ Python proficiency for numerical validation — MATLAB, R, C, SQL, Stata, or other languages also considered ✅ 2+ years of professional, research, or teaching experience ✅ Understanding of practical engineering constraints and approximations ✅ Strong written English (C1+) ✅ Professional certifications (e.g., CMME, SAS, CAP) are an advantage How It Works Apply → Pass Qualification(s) → Join a Project → Complete Tasks → Get Paid Once selected, you'll go through a straightforward onboarding process including platform registration, a short orientation, and ID verification — after which your first task will be ready to go. ⚠️ Please note: receiving an invitation does not mean you've started earning. Earnings begin once you are actively completing tasks on an active project. Time & Payment 💰 Up to $55/hour* depending on location, expertise, and project 🕐 Estimated ~10–20 hours/week during active project phases 📋 Fixed project rates or individual rates, depending on the project 🎯 Some projects include incentive payments Rates vary based on expertise, skills assessment, location, and project needs. Lower rates may apply during onboarding or non-core phases. Interested? Submit your CV in English, including your email address and phone number. 📩 Apply via this post or reach out directly — we'd love to hear from you!

About Envision Envision Energy is a world-leading green technology company that provides renewable energy solutions for global enterprises, governments, and institutions. Encompassing three major business sectors - Smart Wind Turbines, Energy Storage, and Green Hydrogen Solutions, Envision Energy collaboratively constructs comprehensive solutions for energy transformation. Envision Energy has received several accolades for its sustainability performance, including the EcoVadis Gold Medal and the CDP “A-List”. It was also recognized in Fortune's “Change the World” list and ranked among the top 10 smartest companies by the MIT Technology Review. Today, Envision Energy leverages its global network of R&D and engineering centers across China, the United States, UK, France, Germany, Denmark, etc. to continuously lead global green technology development. Envision Energy joined the Science Based Targets initiative (SBTi) and committed to achieving the "Business Ambition for 1.5°C" in 2021. It has achieved carbon neutrality across its global operations by 2022 and will achieve carbon neutrality throughout its value chain by 2028. Key Responsibilities • Establish and maintain strong service relationships with customers, ensuring clear communication and full alignment with service contracts, SLAs, and LTSA requirements., • Plan, govern, and execute O&M activities in compliance with contractual obligations, safety regulations, and applicable standards., • Develop, own, and embed a strong safety culture across the Envision BESS Business Unit, ensuring safety leadership at all organizational levels., • Identify, prioritize, and resolve issues impacting product and system performance; proactively define recovery plans and lead execution to restore normal operations., • Lead internal and external root cause analysis and management of change activities, ensuring sustainable corrective and preventive actions., • Provide site support leadership and coordinate subcontractors and service vendors to ensure effective and compliant maintenance execution., • Oversee the planning and execution of preventive and predictive maintenance activities in collaboration with regional service teams., • Manage on-site spare parts and spare unit inventories, ensuring availability, cost control, and timely replenishment., • Monitor and govern subcontractor performance, ensuring compliance with OEM requirements, contractual obligations, and warranty conditions., • Own O&M budgets and drive cost efficiency while maintaining the highest standards of safety, reliability, and service quality., • Promote operational excellence and best practices across the organization, driving standardization and continuous improvement., • Ensure all maintenance activities are properly planned, executed, and documented within CMMS systems, with strong data quality and governance., • Monitor, analyze, and drive achievement of service KPIs and SLA commitments across all operational sites., • Lead escalation management for critical incidents, operational risks, and customer-impacting events., • Ensure service scope, SLAs, LTSA agreements, O&M strategies, and resource plans are clearly defined, approved, and consistently implemented. Role Requirements • Bachelor’s degree or higher in Engineering, Operations Management, or a related technical discipline., • Minimum of 12 years’ experience in operations, maintenance, or service delivery roles, including senior management or director-level leadership experience., • Proven ability to lead and manage large, multi-disciplinary teams in complex, multi-site operational environments., • Strong expertise in asset management, maintenance strategies, and O&M best practices across the asset lifecycle., • Demonstrated experience in the implementation, governance, and optimization of CMMS/EAM systems., • Solid technical knowledge of electrical equipment and systems, including AC/DC systems, low- and medium-voltage infrastructure, power conversion systems (PCS), and battery energy storage systems (BESS)., • Experience in customer-facing service delivery roles, including contract management, customer support, and handling critical operational situations., • Background in industrial, energy, infrastructure, or other large-scale technical operations environments., • Working knowledge of industry frameworks and standards such as ITIL, ISO 55000, ISO 20000, or equivalent., • UK-based, with a valid driving licence preferred.

Lead Mechanical Engineer / Reliability / Maintenance – Power Generation CHP / Power Station £90k - £120k plus 15 % bonus Car Allowance Pension About the Role — Mechanical Focused Version As a Power Generation Engineer, you will act as the mechanical and plant-systems subject matter expert supporting underwriting decisions and client risk reduction strategies. The role centres on evaluating the mechanical integrity, operational reliability, and failure exposure of power generation assets and associated balance-of-plant systems. You will provide technically grounded risk selection input and practical, engineering-driven loss prevention guidance. Main Responsibilities • Provide specialist mechanical engineering support to underwriters on Power Generation accounts, focusing on rotating equipment, thermal systems, and critical plant infrastructure., • Conduct detailed field surveys of operational and construction-stage power facilities, assessing mechanical condition, equipment reliability, maintenance practices, and failure vulnerabilities., • Inspect and evaluate boilers, turbines, generators, transformers, pressure systems, piping networks, cooling systems, and auxiliary mechanical equipment., • Review maintenance regimes, inspection intervals, shutdown practices, and condition monitoring programs to verify effectiveness of mechanical risk controls., • Identify single-point failures, mechanical degradation risks, and system design weaknesses that could lead to property damage or business interruption., • Develop engineering-based loss prevention and reliability improvement recommendations targeting mechanical failure modes and operational stresses., • Present technical findings to plant engineering and maintenance teams, focusing on equipment condition, failure scenarios, and mitigation actions., • Produce technically detailed survey reports using formal risk assessment methods, engineering calculations, and loss estimation tools., • Perform desktop mechanical risk reviews using drawings, P&IDs, maintenance data, inspection reports, and third-party technical documentation., • Translate mechanical risk findings into clear technical guidance for underwriters., • Manage technical survey programs for assigned clients, including service planning, coordination, technical reviews, and engineering stewardship meetings., • Produce Account Summary Reports with emphasis on mechanical reliability exposure and asset condition risk., • Peer review engineering survey reports for technical accuracy and mechanical risk coverage., • Analyze loss events from an engineering failure perspective, identifying root mechanical causes and preventive controls. What We’re Looking For Experience • 10+ years of hands-on industrial experience in power plant mechanical engineering, operations, or maintenance., • Direct experience with heavy rotating equipment and thermal systems such as steam turbines, gas turbines, boilers, heat recovery systems, and large transformers., • Strong practical knowledge of mechanical integrity, inspection, reliability engineering, and failure mechanisms., • Experience across multiple power generation technologies including thermal, combined cycle, nuclear, and renewable facilities., • Involvement in plant construction, commissioning, or major outage projects., • Experience performing mechanical condition assessments and reliability audits., • Prior work with insurers, risk engineering firms, or technical consultancies is beneficial., • Experience working across international sites and engineering cultures. Technical Skills & Qualifications • Degree-qualified Mechanical Engineer (or closely related discipline)., • Strong knowledge of mechanical engineering principles, plant equipment design, and failure modes., • Practical understanding of maintenance strategies, inspection techniques, and condition monitoring methods., • Ability to interpret mechanical drawings, system layouts, and technical specifications., • Strong loss prevention and reliability engineering capability., • Additional languages are an advantage. Key Capabilities • Comfortable working in both office and heavy industrial plant environments., • Able to conduct detailed mechanical inspections involving extended walking, climbing, and working at elevation with PPE., • Strong technical writing and documentation skills with high attention to engineering detail., • Able to clearly explain mechanical risks and failure impacts to both technical and non-technical stakeholders., • Self-directed, analytical, and technically decisive., • Effective team contributor and field survey lead., • Able to deliver technical reports and account reviews on schedule., • Willing and able to travel internationally up to 90 days per year.

Risk - Remote - Six Figures Wind / BESS Solar and Conventional Power generation • Survey a global portfolio of Renewable assets and supporting with the placement of their insurance through development of underwriting reports, • Improve the process safety performance for our client through recommending continued improvements through risk improvement recommendations and implementation of best practices, • Calculating estimated maximum loss values associated with major incidents with the use of our specialist software, • Work with a specialist team of client executives, brokers and claims personnel to provide technical information and support for insurance placement, tenders and requests for proposals., • Developing thought-leadership publications to support clients in their understanding and delivery of improvement in process safety management topics. What you need to have: • Extensive industry experience within the Power Energy sector - 10 years min, • Bachelor's Degree in an Engineering subject (or similar), • Effective communications skills in order to liaise with senior management at various sites, delivering presentations and leading survey meetings, • Highly organised in order to achieve report deadlines and coordinate site visits with a range of clients and underwriters across a variety of countries, • An advanced engineering skill set including experience with process engineering, process safety management, operations management, construction project management, asset integrity management and emergency response What makes you stand out: • Experience working for one or more major Operators or Manufacturers is essential, • Having held a senior management position(s) or position of technical influence, • Master's Degree in an Engineering subject (or similar), • Professional/Chartered/Fellow of Professional Institute or the training and experience to obtain chartered status (ICheme/IET/IMechE)

Job Title: Junior Big Data Developer Location: UK Experience: 2-5 years Education: Bachelors in Science (IT/Computer Science/Engineer) Employment Type: Full-Time UK based candidates only. Role Overview: We are seeking an experienced Scala /Hadoop/ Big Data Developer. The role will focus on building and enhancing data-driven solutions, working within a fast-paced financial services environment. Key Responsibilities: • Design, develop, and maintain applications using Scala, Python, Hadoop and Java., • Work with Big Data technologies, including Spark, Hive (nice to have)., • Collaborate with cross-functional teams to deliver scalable, high-performance solutions., • Participate in code reviews, testing, and performance optimization., • 2-5 years of software development experience., • Strong hands-on expertise in Scala (mandatory), plus Python and Java., • Experience with Big Data frameworks; Apache Spark experience is an advantage., • Solid understanding of software engineering principles, data structures, and algorithms. 1. Bachelor’s degree in computer science, Maths, IT, statistics or physics related field., 2. You should be entitled to work in the UK with legal work authorization status., 3. Must be willing to travel within the UK as per project/client requirements., 4. Excellent communication skills and teamwork skills.

Location: Cheltenham INTRODUCTION We are looking to hire a skilled Software Developer to join our dynamic and innovative team. As a Software Developer, you will be responsible for designing, implementing, and maintaining high-performance, scalable software solutions using Python and related technologies. You will collaborate closely with cross-functional teams to develop and deploy robust web applications, leveraging your expertise in Flask, MongoDB, HTML, CSS, Bootstrap, JavaScript, RESTful services, Docker, AWS, Jenkins, and Git. RESPONSIBILITIES • Design, develop, and maintain Python-based web applications using the Flask framework., • Implement efficient data storage solutions using MongoDB., • Create responsive and visually appealing user interfaces using HTML, CSS, and Bootstrap., • Enhance user experience through dynamic client-side scripting with JavaScript., • Develop and integrate RESTful services to support seamless communication between frontend and backend systems., • Containerise applications using Docker for streamlined deployment and scalability., • Deploy and manage applications on AWS cloud infrastructure., • Implement continuous integration and continuous deployment (CI/CD) pipelines using Jenkins., • Collaborate with cross-functional teams to understand requirements and translate them into technical solutions., • Ensure code quality, performance, and security through rigorous testing and code reviews., • Utilise version control systems, particularly Git, for managing the codebase and collaboration. EXPERIENCE / REQUIREMENTS • Bachelor’s degree in Computer Science, Software Engineering, or a related field (or equivalent work experience)., • Proven experience (1.5 years) as a Python Developer, with a focus on web development., • Proficiency in the Flask framework and MongoDB database design and management., • Strong understanding of web technologies including HTML, CSS, Bootstrap, and JavaScript., • Experience building and consuming RESTful APIs., • Familiarity with containerisation technologies such as Docker., • Hands-on experience with cloud platforms, particularly AWS., • Knowledge of CI/CD tools such as Jenkins for automated deployments., • Solid understanding of version control systems, particularly Git., • Excellent problem-solving and analytical skills., • Strong communication and collaboration abilities. ADDITIONAL REQUIREMENTS • Occasional UK travel may be required to attend team or customer meetings, events, and training activities., • Flexible working arrangements are available; however, there is value placed on teams being co-located in offices. Applicants are encouraged to discuss what may be possible during the application stage.

Location • Remote, but requirement to meet up once a month for in-person collaboration day, • UK based About Akixi Akixi is a leading provider of SaaS analytics solutions for cloud-based communication platforms, helping service providers and enterprises gain actionable insights from their telephony and collaboration data. Our solutions span Microsoft Teams, Cisco BroadWorks, Webex Calling, and CRM integrations — delivering real-time and historical analytics that improve customer experience and business performance. We are expanding our platform to include advanced AI capabilities — voice and chat assistants, intelligent analytics, and predictive insights — and are seeking an AI Engineer to define and deliver this vision. Job Summary & Purpose Own and drive Akixi’s AI and ML strategy — from concept and architecture through hands-on prototyping and deployment — to embed intelligence into Akixi’s products and analytics platforms. As the AI Engineer, you will define and execute Akixi’s AI roadmap, combining leadership of architecture and engineering practice with hands-on development of prototypes and production features. You’ll partner with Product, Data, and Platform Engineering to design and integrate AI-driven capabilities such as voice/chatbots, natural-language analytics, and predictive models. This role balances strategic technical direction with hands-on implementation, ensuring Akixi’s AI initiatives deliver tangible business and customer outcomes. Key Responsibilities • Lead the definition and delivery of Akixi’s AI strategy and technology roadmap., • Architect scalable AI solutions integrated into Akixi’s SaaS analytics platform., • Prototype, develop, and integrate AI-driven components such as chatbots, voice assistants, ML models, and LLM-based analytics., • Apply prompt engineering and model-tuning techniques to optimize chatbot and LLM behaviour., • Conduct research, proof-of-concepts, and feasibility studies for emerging AI technologies., • Collaborate with Product Management to scope AI features and align them with business goals., • Partner with Data Engineering to operationalize models, manage training data, and implement monitoring and retraining pipelines., • Work closely with Development, DevOps, and QA teams to ensure smooth CI/CD integration and deployment of AI components., • Establish standards for AI code quality, ethics, and data governance., • Mentor engineers working on AI-related projects, fostering technical excellence and innovation., • Evaluate external AI vendors, tools, and frameworks for adoption or integration., • Stay ahead of developments in AI/ML, LLMs, and applied analytics, translating trends into practical opportunities for Akixi. Required Skills & Experience • 4+ years in software engineering, with at least 2+ years focused on AI/ML or data-driven product development., • Proven expertise in developing and integrating AI solutions such as chatbots, voicebots, ML models, or LLM-based analytics., • Strong proficiency in Python (preferred) and/or JavaScript/TypeScript., • Hands-on experience with AI frameworks (e.g. TensorFlow, PyTorch and/or LangChain) and LLM APIs (e.g. Azure OpenAI, OpenAI API, Anthropic and/or AWS Bedrock)., • Experience with Microsoft Bot Framework, Dialogflow, or similar conversational-AI platforms., • Deep understanding of prompt engineering and fine-tuning of large language models., • Strong grounding in ML concepts — supervised, unsupervised, and reinforcement learning., • Familiarity with cloud AI/ML services (e.g. Azure Cognitive Services, AWS SageMaker, and/or GCP Vertex AI)., • Experience deploying and monitoring AI workloads in CI/CD environments (e.g. Jenkins, Docker, Kubernetes, and/or AWS)., • Ability to design data pipelines, APIs, and microservice integrations supporting AI features., • Excellent problem-solving, communication, and cross-team collaboration skills., • Proven ability to lead technically while remaining hands-on in design and coding. Advantageous Skills & Experience • Experience with call/contact-centre analytics, Microsoft Teams Graph API, or telephony platforms (e.g. BroadWorks, Webex Calling)., • Knowledge of data governance, model ethics, and MLOps practices., • Exposure to data visualization and predictive analytics for customer-experience metrics., • Advanced degree in AI, ML, Data Science, or related discipline. Why Akixi At Akixi, you’ll play a pivotal role in transforming how businesses understand and act on communication data. You’ll define and deliver the intelligence layer of a platform used by thousands worldwide — in an environment that values innovation, experimentation, and technical depth. We offer a collaborative culture, hybrid flexibility, and the opportunity to lead meaningful, high-impact AI initiatives from vision to production.

📍 Remote | Full-Time 👋 About Us Medify is a mission-driven EdTech company widening access to medicine and healthcare careers. Our platform supports thousands of learners preparing for high-stakes admissions exams, and our engineering team plays a critical role in delivering reliable, scalable, and high-quality learning experiences. Medify Engineering is a team of ten engineers across two teams, and everyone is hands on, including engineering management and the CTO, which helps us keep our processes practical and engineer-friendly. We work to minimise meetings: engineers typically have a 15-minute daily standup for in-progress updates and quick alignment with Product, plus (per two-week sprint) a one-hour refinement with Product, a one-hour planning session with engineering, and a 30-minute company-wide demo. Operational work like deployments, bug triage, and on-call is handled on a rotation, with each person covering one week roughly every two months. 🎯 The Role As a Senior Full Stack Engineer at Medify, you will play a pivotal role in shaping our platform and technical direction. Working closely with the CTO and fellow engineers, you’ll be involved across the full software development lifecycle - from ideation and design through to development, testing, and deployment. This is a fully remote, home-based role, suited to someone who enjoys ownership, collaboration and solving complex problems in a fast-moving environment. Tech stack: Ruby on Rails (backend), frontend transitioning from Ember to React, Postgres database, hosted on AWS. 🧩 Key Responsibilities • Design and develop high-quality, scalable, and efficient software solutions using modern best practices, • Collaborate closely with Product and Design teams to understand requirements and provide technical input, • Contribute to architectural decisions and overall system design, • Conduct code reviews and provide constructive feedback to maintain high code quality, • Troubleshoot, diagnose, and resolve software issues efficiently, • Develop and maintain automated tests to ensure performance and reliability, • Mentor junior engineers and share technical knowledge and best practices, • Participate in agile planning, backlog management, and delivery updates, • Stay up to date with emerging technologies and software development best practices, • Support recruitment by contributing to interviews and selection decisions 🧠 Core Competencies • Excellent problem-solving and analytical skills, • Strong communication and collaboration skills, • Ability to thrive in a fast-paced, agile environment, • Leadership and mentoring capability, • High attention to detail and quality 🎓 Qualifications • BS/MS degree in Computer Science, Engineering, or a related field is desirable but not required 🛠️ Experience & Knowledge • 5+ years’ experience in software development, • Extensive experience with modern programming languages and frameworks, • (Ruby on Rails and React highly desirable), • Proven track record of building scalable, efficient software systems, • Strong understanding of the software development lifecycle and agile methodologies, • Experience working with cross-functional teams (Product, Design, Engineering), • Experience recruiting and mentoring junior engineers is a plus 💡 Skills • Proficiency in modern programming languages and frameworks, • Strong grasp of data structures, algorithms, and software design principles, • Experience with databases, APIs, and networking, • Knowledge of software testing methodologies and tools, • Familiarity with DevOps practices and tooling, • Ability to learn and adapt quickly to new technologies, • Clear, confident written and verbal communication ✅ What We Offer • Competitive salary: £70,000–£85,000 depending on experience, • Annual leave: 25 days, rising to 28 days over three years, • Fully remote, flexible working, • Pension scheme, • Professional development sponsorship and matched charity funding, • Private health and dental care after one year of employment

Venesky Brown is looking to recruit an IMS Governance and Assurance Manager to work on the Sizewell C nuclear project in Suffolk. This long-term contract role (day rate) can be based in the London, Bristol or Suffolk offices, with hybrid working available. Job Purpose / Overview: Reporting to the Head of Nuclear Compliance, Audit and Performance Improvement, the IMS Governance and Assurance Manager within the Safety, Security and Assurance (SS&A) directorate will have significant specialized depth and breadth of expertise in the development & application of Quality Assurance process within the SZC Client organisation. Within the ‘3 Lines of Defence’ model the incumbent will develop and direct departmental plans, including business, production, operational and/or organizational priorities to ensure effective utilization of resources in the IMS team. • The incumbent will provide expert advice and support to the business on Integrated Management Systems and associated Audit activities., • The IMS Governance and Assurance Manager will be expected to work independently, with guidance in only the most complex situations, and will have the interpersonal skills and experience to influence decisions taken at a senior level., • A key role is the management of the Interface with the Office for Nuclear Regulation creating the conditions of an open, honest and efficient relationship to support successful and timely delivery of the project whilst ensuring quality and related regulatory requirements are met. The IMS Governance and Assurance Manager will be the Manager for LC17, ensuring that SZC had the arrangements to meet the needs of the license condition., • The IMS Governance and Assurance Manager will have latitude for making decisions, guided by resource availability and functional objectives in discussion with the Head of Function. Contributions will include project management, responsibility for financial performance and input into planning and policy development. Principal Accountabilities: The post holder has responsibility for a number of key processes; • Defining the process and procedures used to deliver internal IMS audits, IMS management and aligning to the requirements of the Integrated assurance Strategy., • Providing direction and support for the IMS Governance Manager to ensure that SZC has a well maintained, structured and used Integrated Management System to enable the safe delivery of the project., • Create and deliver the SS&A Integrated assurance programme and create and support the programme Integrated Assurance Plan., • Directing and managing the IMS resources and review their outputs, • Leading and managing the interface and relationship with the Regulators (principally ONR) relating to IMS., • Ensures that findings from all audits are agreed and recorded to ensure timely closure of identified shortfalls., • Monitors the outcome of Quality assurance activities and provides updates to the relevant forums on performance and trending., • Delivery, execution and maintenance of relevant processes, including document review and the ongoing oversight and improvement of processes in response to experience and learning., • Ensuring that the Sizewell C strategy and guidance enable the organisation to achieve certification in international standards, including ISO9001, 14001, 45001, 27001 and PAS 2080., • Providing inputs for planning and management of the budget for the Safety Directorate and workloads including team performance and development, departmental risk management etc., • Management of the team resources will include accountability for administrative matters such as budgeting, resourcing, training, nuclear baseline compliance, health & safety, etc., • License condition Manager for LC17 Knowledge, Skills, Qualifications, Experience Knowledge & Skills Essential • Strong interpersonal skills. Able to engage credibly within and external to the business., • Experience in leading & managing teams, • Ability to influence and encourage change of behaviours across a wide range of organisational levels, • Expert knowledge of Quality Systems, ISO 9001, ISO 19443, ISO 14001 and interrelated processes such as ISO 45001, GSR-2/3., • Experience of managing an Integrated Management System within a large complex organisation., • Strong presentation and communication skills – able to present at multiple organisational levels and to external regulatory stakeholders, • A strong and credible decision maker, able to create confidence through crafting of strong justifications and arguments Qualifications & Experience Essential • Degree qualified in an engineering or science related discipline or equivalent, • Experience of leading teams, • Extensive experience within the UK regulatory environment, • Extensive experience of regulatory and external stakeholder engagement, • Large-scale infrastructure Project experiences, • Experience and technical knowledge of nuclear safety design and quality management, • Experience of working with Regulators within a dynamic environment. Sizewell C Overview: Come and join our expanding Sizewell C (SZC) team and work on one of the most exciting and largest megaprojects in the UK, whilst being at the forefront of the UK’s climate change agenda and energy policy. Following on from the success of Hinkley Point C (HPC), the SZC Project is a nuclear new build project in Suffolk, which has obtained planning approval and Government financing support. The project has started construction and when completed, it will provide dependable electricity to 6 million homes for 60 years, which along with renewables, will support Britain to achieve Net Zero by 2050. About Venesky-Brown Recruitment: Venesky-Brown Recruitment are a UK-based Recruitment Agency, specialising in Construction, Engineering, Infrastructure, IT & Digital, and Professional Services. Established in 2005, we've evolved into industry leaders, driven by our mission to inspire and empower through meaningful employment. When you join us, you gain access to a stable, long-term career. We collaborate with Tier 1 clients on major infrastructure projects, offering growth opportunities and a clear career pathway. Our comprehensive Career Development Programs, from Level 2 Construction Operations to Level 6 Site Management, bridge skill gaps to benefit both you and our clients.

Texo Recruitment are currently looking for remote Structural Designers to join us on a 4 month contract basis. Key Requirements: • Degree level in engineering discipline, NVQ/SVQ in Engineering also accepted, • Minimum of 2+ years Industy experience (OG), • Proficient AutoCAD user, • Familiarity with point cloud data and tools, • BOSIET is preferred for 1 of 4 candidates to support in Site Surveys as required, • Own computer with Windows 11 and antivirus software, CAD license, • Repair Order experience and offshore survival If you are interested please contact Louise on 07918 259861, or 01224 446 789.

Job title: Electronic Design Engineer Location: Reading/Glasgow sites available within hybrid working arrangements. Mission Akkodis, is a global leader in the engineering and R&D market that is leveraging the power of connected data to accelerate innovation and digital transformation. With a shared passion for technology and talent, 50,000 engineers and digital experts deliver deep cross-sector expertise in 30 countries across North America, EMEA and APAC. Akkodis offers broad industry experience, and strong know-how in key technology sectors such as mobility, software & technology services, robotics, testing, simulations, data security, AI & data analytics. The combined IT and engineering expertise brings a unique end-to-end solution offering, with four service lines – Consulting, Solutions, Talents and Academy – to support clients in rethinking their product development and business processes, improve productivity, minimize time to market and shape a smarter and more sustainable tomorrow. Akkodis is part of the Adecco Group and is a commercial brand under which both AKKA and Modis entities operate. Scope The Electronic Engineer develops integrated hardware solutions, both utilising COTS components and designing bespoke systems, through design, development, verification, and validation. In this role you will produce electrical interconnect designs, cable schedules, ICDs, wiring schedules, LV distributions, earth & bonding strategies, assess the impact of EMI / EMC, RoHS, REACH and LV Directive on the electrical designs, etc. Responsibilities • Satisfy the HW requirement set through design, development, and test activities., • Implement the hardware architecture in physical and electrical form, fit and function., • Support Manufacturing and Procurement during the build phase, i.e. respond to Problem Reports and implement Engineering Change Requests., • Define the Design Proving / Hardware Test Specifications and use these during qualification., • Define the EMC and Environmental Test Specifications and use these during qualification., • Design and develop any special test equipment to facilitate the above. Skills • General Electronic and Electrical Engineering (degree level)., • COTS AC and DC LV power supplies., • Designing with PCI, RS485/232, Hotlink and Ethernet interfaces., • Designing cables and harness assemblies, utilising military style connectors and backshells, such as MIL-DTL-38999., • An understanding of cable screening methods and military style cable construction methodologies., • Designing to meet EMC and environmental standards / requirements. Experience • Strong relevant experience of the Skills listed above or associated experience that can be applied to electronic, electrical and electro-mechanical design in a regulated industry., • Design and specification of COTS and bespoke sub-assemblies and equipment suitable for 19” racks / cabinets., • Interconnection Design (i.e. wiring harnesses, copper or fibre optical network interconnections, connector types, power distribution and data comms, spatial constraints, environmental considerations)., • Full engineering lifecycle experience (Capture, Design, Implementation, Test)., • Working with requirements in a structured and evidential manner., • Production of Design / Test Specifications and Test Reports.

About the Role: We are seeking a dynamic and technically skilled Technical Solutions Manager to join our team specializing in Battery Energy Storage Systems (BESS). This role is pivotal in designing and delivering tailored technical solutions that meet customer requirements while ensuring compliance with industry standards. In this role, you will work closely with customers, internal teams, and stakeholders to ensure project success from inquiry to implementation. Title: Technical Solutions Manager- Energy Storage Systems Job Responsibilities: • Analyze customer inquiries and requirements to design technical solutions for energy storage systems, including BESS, PCS, and EMS components., • Evaluate technical feasibility and optimize solutions for efficiency and cost-effectiveness., • Prepare detailed technical documentation, including specifications, schematics, and configurations., • Develop and submit comprehensive bidding documents and proposals that meet regulatory, technical, and customer-specific standards., • Work closely with cross-functional teams, including sales, project management, and R&D, to align solutions with project goals., • Serve as a technical point of contact for customers during the pre-sales, proposal, and implementation phases., • Contribute to the development of new tools and methodologies for solution optimization. What You'll Need: • Bachelor’s degree in Electrical Engineering, Energy Systems, or a related field (Master’s degree preferred)., • Proficiency in creating technical documentation, schematics, and bidding documents., • Excellent problem-solving skills with a keen attention to detail., • Strong communication skills to convey complex technical concepts to both technical and non-technical stakeholders., • Strong understanding of battery storage systems, power conversion systems, grid integration, and energy management systems is preferred., • Familiarity with system simulation and design tools., • Proficiency in English, both written and spoken, is required to effectively communicate with international teams, customers, and stakeholders.

Purpose of the Role As a Forward Deployed Engineer, you’ll sit at the front lines of customer success and product innovation. Your mission is to shape customer outcomes by bridging Authsignal’s product capabilities with real-world integration needs. You’ll help enterprises and startups deploy secure identity solutions, create scalable developer resources, and deliver trusted experiences worldwide. ‍ What You’ll Do • Drive customer integrations - guide enterprises and high-growth startups in deploying Authsignal into their systems (CRMs, SaaS platforms, bespoke stacks)., • Shape developer experience - contribute to SDKs, libraries, connectors, and sample code to accelerate adoption., • Be customer-facing - support pre-sales demos, proof-of-concepts, and post-sales implementations (including international travel as needed)., • Create scalable content - produce developer resources (docs, blogs, Looms, video walkthroughs) to reduce friction and empower self-service. What You Bring • Background in solution engineering, systems integration, or pre-sales engineering., • Hands-on experience with APIs, SDKs, and enterprise software integration., • Excellent communicator, confident in front of customers and comfortable explaining complex technical solutions., • Experience in creating content (docs, blogs, videos) or willingness to grow in this area., • Bonus: familiarity with identity, MFA, passkeys, or security concepts. How We Define Success • Seamless delivery of customer integrations and reduced friction in sales cycles., • Increased adoption of Authsignal SDKs, connectors, and developer resources., • Creation of scalable, reusable technical content., • Strong customer feedback and measurable impact on customer success. Qualifications • Bachelor’s degree in Computer Science, Engineering, or equivalent experience., • Proven experience in a customer-facing technical role. Tech Stack & Tools • Languages & frameworks: JavaScript/TypeScript, REST/GraphQL APIs, • Developer Tools: GitHub, Postman, API documentation frameworks, • Content Tools: Loom, Markdown, blogs, docs-as-code workflows

SUMMARY: We’re looking for self-motivated individuals to join our dedicated team of Service Engineers in the UK, delivering outstanding client service every day! This is opportunity is for junior professionals or recent graduates to kickstart their career, gain hands-on experience, and grow within a supportive and dynamic team. ESSENTIAL DUTIES AND RESPONSIBILITIES: To perform this job successfully, an individual must be able to perform essential duties and responsibilities satisfactorily. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. Core responsibilities for this position include: • Troubleshooting, maintenance, upgrading and repair of flow cytometers and Cytek products with proficiency in a timely manner., • Professionally managing technical needs of customers while delivering service excellence., • Maintaining a regular return visit frequency, keeping complete and accurate written and oral records of practical examinations., • Identifying customer needs and contributing to improvements in Cytek products., • Managing the daily schedule to ensure appropriate priority is placed upon urgent customer needs, while setting customer expectations for issues of less urgency., • Connecting with customers in a timely manner during business hours. Professionally communicating technical information to them via telephone technical support, service visit scheduling, product problem information gathering, fault isolation, corrective action, and site visit closure with high quality and efficiency., • Completing all business related transactions to include Field Service Reports, Instrument Qualification Reports, Parts Return Tags, etc. in a timely manner (usually within 48 hours) with high accuracy., • Managing personal service spare parts inventory to ensure accuracy on a regular basis., • Demonstrating the ability to quickly learn new technologies and develop skills in troubleshooting intra-connected complex systems., • Other duties as assigned REQUIREMENTS & QUALIFICATIONS: The requirements listed below are representative of the knowledge, skill, and/or ability required: • Bachelor's degree in Engineering, Life Sciences, and/or other technical degree, • Previous experience in Flow Cytometry Repair or medical equipment is a plus, but not required, • Have a basic understanding of biology as it relates to flow cytometry, • Good level English is a required – other European languages preferred., • Proficiency in Microsoft Office Suite. PHYSICAL DEMANDS AND WORK ENVIRONMENT: The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. • This is a full-time position, with evening and weekend work required as job duties demand, • This job entails a high volume of traveling – up to 75% of the time. Individual should be able to travel on commercial airlines, train, rental/leased car to fulfill job duties, • Individual should be able to lift 12-15kgs with ease, and be able to work in a standing position for 4 hours at a time. WHO WE ARE: At Cytek Biosciences, we are “Reimagining Cell Analysis to Fuel Scientific Discovery.” Our teams are on a mission to advance cancer and cell biology research using a powerful cell analysis technique called full spectrum flow cytometry. We are committed to providing powerful solutions that enable scientists to obtain deep biological insights rapidly and efficiently through high quality, high parametric datasets. Inclusion and diversity are core values at Cytek, and we place a high value on the unique perspectives and ideas that they foster. The Cytek team represents many diverse cultures, backgrounds and viewpoints. We seek to maintain high ethical standards and a culture that values honesty, integrity, and transparency in all that we do. We are committed to our employees and to the communities we serve worldwide. Cytek solutions are used in many of the world’s most renowned pharmaceutical, academic and research institutions. We are a growing company that is always looking for energetic, educated professionals. Expand your possibilities professionally and personally, and join our team as we satisfy long unmet needs in fields of research and medical discovery! All the information collected is needed to consider your application for a job at Cytek Biosciences. If you want to know more about how we will process your information as part of our recruitment process check our ___. Please note that our Applicant Privacy Policy is not supported for viewing on mobile devices. For optimal access, we recommend using a desktop device. Alternatively, you can contact us directly to request a copy of the Applicant Privacy Policy before proceeding with your application.

LONGi Solar is one of the world’s largest solar technology companies, ranking first in global module shipments since 2020. With more than 40,000 employees, 30+ locations and 30 manufacturing sites globally, LONGi has broken the photovoltaic (PV) cell conversion efficiency record 16 times in a row since 2021. LONGi is the first Chinese solar manufacturer to join the three distinguished climate initiatives RE100, EP100 and EV100. Building on its leadership in photovoltaics, LONGi has recently expanded into the energy storage sector. YOU WILL… • Support customers & sales, leading their trainings, promote LONGi and its products, build product knowledge and establish excellent communications with customers, • Provide detailed technical support to customers and sales team with focus on utility business in UK & Ireland Region, • Visit customers to provide technical guidance on the technology and new product offering, • Online and face to face meetings with clients technical departments for technical clarifications regarding technology, installation features and solutions, other, • Help manage the product support structure within the region and provide technical input to customer service contracts, • Analyse customer feedback on new products and communicate to internal product development team for improvement, • Create product promotion materials on the basis of regional characteristics, • Champion quality and safety initiatives among the service teams, • Support any post sales activity in case of claim, • Support on the review and agreement of contract technical requirements, follow up with client and 3rd parties discussions, • Promote LONGi Solar products and solutions in conferences, webinars or related marketing events. YOU NEED… • Good communication skills, comfortable in making speech (technical and marketing) in public on conference and trade shows, as well as the trainings to customers, • Fundamental understanding on PV ingot/wafer/cell/module manufacturing technology, with knowledge on system integration basics preferred, • Experience of working in distributor or EPC companies, understanding of dynamics, • I would change to Experience on working in PV utility projects, understanding of main stakeholders and PV modules supply contracts, • Experience in contract negotiations, pre-shipment QA/QC, and post-delivery claims, • Fluency in English, • Science or engineering degree with 5-8 years working experience in electronics and/or photovoltaic industry, • Willing and availability to travel frequently sometimes on short notice, • Knowledge on BESS products is considered an added value WE OFFER… • A challenging position in a market leading photovoltaic company, • The chance to work in a global team with international vision, • A promising career development within our fast-growing organization, • Colleagues with expertise willing to support, hard-work and drive the company with you, • A competitive salary with a success-based variable, additional benefits, and other attractive perks, • Opportunity to develop your knowledge, experience and grow in the PV sector with the leading technology company <<<< We get our Energy from our People 🔋🥇 >>>>

Graduate ASIC Verification Engineer Cambridge or remote within the UK Must have internship or placement experience and be based in the UK. An innovative UK fabless semiconductor company developing next-generation secure microcontroller technology for safety-critical embedded systems. Built on advanced capability-based architecture research, the company is already collaborating with several of the world’s leading technology organisations. I am looking for a talented Graduate ASIC Verification Engineer to join a growing verification team. You will work alongside experienced engineers to ensure the functional correctness and quality of complex digital designs used in next-generation semiconductor products. This role is suited to graduates with strong digital design and verification knowledge, excellent academic performance, and relevant industry experience through internships or placements. Key Responsibilities • Develop and maintain verification environments for digital and ASIC designs, • Write SystemVerilog/UVM testbenches to verify RTL functionality, • Create directed and constrained-random tests, • Run simulations, analyse results, and debug failures, • Contribute to coverage-driven verification strategies, • Work closely with design engineers to resolve functional bugs, • Participate in design and verification reviews, • Document verification plans, test results, and coverage metrics Required Qualifications • Bachelor’s or Master’s degree in Electronic Engineering, Electrical Engineering, Computer Engineering, or a related discipline, • First Class or Upper Second Class (2:1) degree from a top engineering university, • Minimum 12 months of relevant internship or industrial placement experience, • Strong understanding of digital logic design and computer architecture, • Knowledge of HDL languages (SystemVerilog, Verilog, or VHDL), • Strong analytical and problem-solving skills, • Good written and verbal communication skills Desirable Skills • Experience with SystemVerilog verification and UVM – through internship, • Exposure to coverage-driven verification methodologies, • Familiarity with EDA tools (Synopsys VCS, Cadence Xcelium, Siemens Questa), • Knowledge of Python, Tcl, or scripting for verification automation, • Understanding of ASIC design flows, • Enthusiasm for semiconductor design and verification On offer is the rare opportunity to work for a British company and remotely, mentorship from experienced ASIC engineers and the opportunity to work on advanced semiconductor projects. You will be entitled to a base salary and company stock options. For more information please contact Rachel Mason at IC Resources

Field Application Engineer - Timing Solutions – UK & Nordics Are you a technically savvy, customer-focused engineer with a passion for semiconductor timing solutions? Join a leading innovator in the semiconductor and timing technology space, where your expertise will help shape the future of precision timing across diverse applications. About the role As a Field Application Engineer (FAE) based in Europe, you will be the critical link between cutting-edge timing products and customers’ success. You’ll work closely with sales and engineering teams to deliver tailored technical solutions, troubleshoot complex challenges, and drive the adoption of timing technologies. Key responsibilities: • Provide expert technical support and consultation to customers and partners across a defined region, • Collaborate with sales teams to understand customer requirements and craft compelling technical proposals, • Conduct product demonstrations, training sessions, and workshops to educate customers on timing solutions, • Troubleshoot and resolve complex application issues related to timing and synchronisation, • Gather customer feedback to inform product development and roadmap planning, • Represent the company at industry events, conferences, and technical forums Key requirements: • Proven experience as a Field Application Engineer or similar role in semiconductor timing or related technologies, • Strong understanding of timing, synchronization, and clock generation principles, • Excellent communication skills with the ability to translate complex technical concepts for diverse audiences, • Ability to travel within Europe to support customer engagements and events, • Degree in Electrical Engineering, Electronics, or a related technical field Ready to make an impact in the world of timing solutions? Let’s connect and explore how you can be part of this exciting journey. Contact Dave today.

AYES is looking for a Software Engineer AYES, an international engineering and technology consultancy founded in Italy, is continuing its growth and expanding its UK team. We are looking for a Software Engineer experienced in SW development, embedded systems, and software engineering for complex technical projects. ⚡ Your profile • University degree (BSc or MSc) in Computer Science, Software Engineering, Electronic Engineering, or a related field., • Minimum of 3 years’ experience in software development, with a strong focus on C++ and embedded systems., • Experience developing software for real-time or safety-critical systems., • Familiarity with software architecture, testing, debugging, and version control tools., • Availability to work in the South of the UK. 🌍 About AYES We are an international consultancy specialised in the Aerospace, Rail, Automotive, Energy, Naval and Defence sectors. Our team combines experience, innovation, and a global vision to deliver high-value engineering solutions for international projects. 🚀 What we offer • The opportunity to join a company in the midst of international growth., • A dynamic, collaborative environment focused on professional development., • High-impact projects across Europe and the United States., • Real opportunities for career growth and advancement. If you are passionate about software engineering, enjoy developing complex systems, and want to grow in a global and innovative environment… SAY YES AND GROW WITH AYES!

Job Description: iOS Engineer at everyLIFE Position Type: Permanent. Location: UK-based Remote. Head Office located in Farnborough, Hampshire. Benefits include: 25 days holiday + 3 additional days over Christmas, early finish Friday, private medical insurance, life insurance, Cycle-scheme, free non-fiction book scheme. Working Hours: Full time Following the successful launch of PASSgenius™, our cutting‑edge suite of AI, data, and automation tools, we’re entering an exciting period of rapid growth. To accelerate what comes next, we’re searching for a full‑time iOS Engineer to join our fast‑moving, feature‑rich app team. The Role • Be part of a team of highly skilled engineers to deliver polished features on consistent basis in a high pace environment. We deploy code every two weeks to thousands of users., • Directly responsible for the development and deployment processes – make sure that the features are shipped optimally, and product stays healthy once they hit production., • Design, review, write and test code. This is hands-on engineering role, and you will be directly involved in the design and development of new features, writing, reviewing and testing code., • Insist on the highest standards and create functional and engaging features that will delight our users., • Provide feedback to teammates to make your team the best version of itself. Desired Skills • Bachelor’s degree in Computer Science or related field, or equivalent experience, • 4+ years of experience with iOS mobile app development, • Good working knowledge of iOS platform, Swift, GRDB, SwiftUI, Combine, • Good communication skills and the ability to work effectively in a remote team environment, • Attention to details – any code that makes it into the product directly impacts the lives of people being cared for, • Strong computer science fundamentals in object-oriented design, algorithms and data structures, • Self-starter, analytical and creative, • Strong team player with a positive attitude, • Experience writing clean, testable, high-quality code, • Good understanding of object oriented and SOLID principles, and clean code architecture, • Experience writing apps using The Composable Architecture, • Good experience with writing unit tests, • Familiar with git and/or git-flow, Bitbucket, JIRA, Confluence, Bitrise, Bugfender Bonus • Experience in Agile methodologies such as Scrum or Kanban, • Good knowledge of test automation using XCUITest, • Good understanding of material design and offline first UX/UI, • Knowledge of Android platform, Kotlin, Room, Coroutines, Koin Our mission is to create effective tools and services that release the potential of care teams. Established in 2014, everyLIFE Technologies is a fast-growth SaaS provider primarily to the UK social care market. We exist to support care services to be the best that they can be. We design, build, release, manage and support software and mobile applications that are crucial parts of the care being given to tens of thousands of people across the UK. We must get it right, every day! Our ideal teammates are thoughtful, humble, curious, achievement-oriented professionals who can both zoom into the details and zoom out to embrace the big picture. We are customer-led and always aim for the highest standard. We believe in being transparent in all our dealings; acting fairly, openly, and honestly in everything we do. Please note that this is a UK based role, and we are only able to accept applicants with the right to live and work in the UK without the need for sponsorship. If you are on a visa and interested in applying for this role, please contact us for further information. If you have any questions, please email Due to the high volume of applicants that we receive, we cannot always guarantee that you will receive a response.

Business Development Manager / Area Sales Manager / Technical Sales Engineer required to join a leading water treatment consultancy. The successful Business Development Manager / Area Sales Manager / Technical Sales Engineer will be responsible for developing new business across the UK, selling water treatment solutions including wastewater treatment systems, liquid containment solutions, water filtration systems, stormwater management, industrial process water treatment, preventative maintenance & service plans, and water quality monitoring & testing services. Full product training provided. The successful Business Development Manager / Area Sales Manager / Technical Sales Engineer will ideally have proven sales experience in technical sales within water treatment / management, including liquid containment, water treatment, wastewater systems, or transferable sectors such as industrial Filtration / separation equipment, mechanical systems, environmental services, or infrastructure solutions. Package • £65,000 - £75,000 basic pay, plus up to £25,000 in Commission and Bonuses, • Mobile phone and laptop, • 5 weeks annual leave + bank holidays, • Life assurance worth 2 x salary, pension contributions, • Sick pay, • Further career development and full training provided Business Development Manager / Area Sales Manager / Technical Sales Engineer Role • Proactively developing new business across the UK, selling water treatment solutions including wastewater treatment systems, liquid containment solutions, water filtration systems, stormwater management, industrial process water treatment, preventative maintenance & service plans, and water quality monitoring & testing services. Full product training provided., • Manage relationships for accounts for liquid containment products, including corrugated steel water tanks, modular wastewater treatment systems, geomembrane solutions, and related components., • Generate quotations, manage enquiries, close orders, and maintain accurate CRM records., • Collaborate closely with technical and design teams to develop tailored client solutions., • Provide responsive troubleshooting and technical support to clients., • This is a fully remote role covering the whole of the UK. Business Development Manager / Area Sales Manager / Technical Sales Engineer Requirements • Experience as a Key Account Manager, Account Manager, Area Sales Manager, Sales Engineer, Business Development Manager, Technical Sales Engineer, Sales Representative, or similar within the water treatment sectors., • Experience selling, servicing, or managing accounts within engineering related to water treatment, including wastewater systems, liquid containment, pumps, valves, filtration systems, irrigation systems, or similar products. Full product training provided.", • A technical engineering qualification, an apprentice trained, HNC, HND or a degree would be advantageous., • Have a strong working knowledge of Legionella control solutions., • Strong ability to develop bespoke technical solutions for client needs., • Full UK driving licence required.

Design Manager – Data Centres (Electrical or Mechanical) Location: UK / Europe (Hybrid) Overview A rapidly growing AI and digital infrastructure developer is seeking a Design Manager with either an Electrical or Mechanical engineering background to support the development of large-scale data centre projects across Europe. This role is ideal for someone coming from an engineering consultancy or design practice, looking to move into the developer/client side and take ownership of the design management process across mission-critical infrastructure projects. Role Responsibilities • Manage and coordinate the design process across multiple data centre developments, • Lead and oversee multidisciplinary consultant teams including electrical, mechanical, civil, and architectural disciplines, • Ensure design deliverables meet technical standards, programme milestones, and budget requirements, • Review engineering designs to ensure efficiency, resilience, and scalability, • Act as the key interface between consultants, contractors, and internal stakeholders, • Support the transition from concept and detailed design through to construction, • Identify opportunities for design optimisation, value engineering, and risk mitigation, • Ensure infrastructure solutions meet high availability and operational requirements typical of mission-critical facilities Requirements Essential • Degree in Electrical Engineering, Mechanical Engineering, or related discipline, • 7–10+ years of experience in engineering design or technical project delivery, • Background in a consultancy or engineering design firm, • Experience working on data centres, mission-critical facilities, or large-scale infrastructure, • Strong understanding of electrical or mechanical building services systems, • Experience managing or coordinating multidisciplinary design teams

Internships Boccard 2026 Location: Deeside, N Wales – Quality, Engineering and Health and Safety Bristol – Project Management, Project Control, Quality, Design Technical Duration: Flexible, typically 12-16 weeks, June -Aug 2026 Type: Full-time, Paid About Boccard: Boccard has a track record of 50 years in the nuclear energy sector and is ideally placed to serve this new era of nuclear energy as a leading specialist in engineering, manufacturing, construction and maintenance across the nuclear energy industry. Known for our innovative projects and commitment to sustainability, we are seeking dedicated and enthusiastic Interns to join our team and gain hands-on experience in the field of Engineering / Quality / Project Management / Health and Safety. Engineering – Deeside Responsibilities: • Assist in the design and development of engineering projects, • Conduct site visits and inspections, • Prepare technical reports and documentation, • Collaborate with senior engineers on various tasks, • Support the team in daily administrative duties Requirements • Currently pursuing a degree in Civil Engineering, Mechanical Engineering, or a related field • Strong analytical and problem-solving skills, • Proficiency in CAD software and MS Office, • Excellent communication and teamwork abilities, • Eagerness to learn and take on new challenges Quality – Deeside / Bristol Responsibilities: • Assist in the development and implementation of quality control procedures, • Conduct inspections and tests on products to ensure compliance with standards, • Analyse data and prepare reports on quality performance, • Collaborate with the production team to identify and resolve quality issues, • Support the quality assurance team in daily administrative tasks Requirements: • Currently pursuing a degree in Quality Management, Engineering, or a related field, • Strong analytical and problem-solving skills, • Proficiency in MS Office and familiarity with quality management software, • Excellent attention to detail and organizational skills, • Ability to work independently and as part of a team Health and Safety – Deeside Responsibilities: • Assist in the development and implementation of health and safety policies, • Conduct risk assessments and safety inspections, • Analyse data and prepare reports on safety performance, • Collaborate with various departments to ensure compliance with safety regulations, • Support the health and safety team in daily administrative tasks Requirements: • Currently pursuing a degree in Occupational Health and Safety, Environmental Science, or a related field • Strong analytical and problem-solving skills, • Proficiency in MS Office and familiarity with safety management software, • Excellent attention to detail and organizational skills, • Ability to work independently and as part of a team Project Management and Project Control - Bristol Responsibilities: • Assist in planning, executing, and closing projects, • Monitor project progress and update project plans, • Conduct research and gather data for project reports, • Coordinate with team members and stakeholders to ensure project success, • Support the project management team in daily administrative tasks Requirements: • Currently pursuing a degree in Project Management, Business Administration, or a Technical / Engineering related field • Strong organizational and multitasking skills, • Proficiency in MS Office and project management software (e.g., MS Project, Trello), • Excellent communication and teamwork abilities, • Eagerness to learn and take on new challenges Design / Technical – Bristol • Provide support in maintaining track on all material being purchased / shipped / used at the workshop • Propose improvements to our existing tools, • Perform manufacturing efficiency study, • Support the team in keeping manufacturing trackers up to date, • Assist with our manufacturing management tool, • Collaborate with senior engineers on various tasks Requirements • Currently pursuing a degree in Civil Engineering, or HND in manufacturing systems, mechanical engineering, or similar • Strong analytical and problem-solving skills, • Proficiency in CAD software and MS Office, • Excellent communication and teamwork abilities, • Eagerness to learn and take on new challenges Benefits of the programmes: • Hands-on experience in a fast-paced work environment, • Mentorship and professional development opportunities, • Networking opportunities with industry professionals How to Apply: Please send your resume and a cover letter explaining what internship you are interested in and why you are a good fit for that position to and by the 17th of April 2026.

The Service Sales Leader is responsible for leading and supporting the service sales function across the European Business region, driving revenue through service contracts, lifecycle agreements, and service-related commercial opportunities. The role focuses on managing a team of service sales professionals to convert systems approaching the end of warranty into service agreements, supporting pricing discussions, and identifying opportunities for upselling services and upgrades. The position works closely with service operations and commercial teams to ensure a consistent and effective approach to service sales across the region. As part of the Service Leadership group, the role contributes to service sales planning, supports forecasting activities, and helps drive consistent processes and performance across the service sales function. The role requires a structured and methodical approach to managing opportunities, tracking performance, and ensuring the team delivers against defined targets. Main Responsibility Service Sales Team Leadership • Lead and support a team of service sales representatives across the region., • Set clear targets and expectations for service contract sales and renewals., • Monitor team performance and provide regular coaching and guidance., • Conduct performance reviews and support individual development plans., • Promote accountability and a results-driven team culture. Service Contract Sales & Conversion • Support the conversion of systems approaching end-of-warranty into service contracts., • Guide the team on pricing approaches for multi-year service agreements., • Ensure consistent handling of service contract opportunities across different markets., • Support negotiations and customer discussions where needed. Forecasting & Pipeline Management • Maintain visibility of the service sales pipeline across the installed base., • Support forecasting of service contract revenue and renewals., • Track opportunities and ensure accurate reporting within CRM systems., • Provide regular updates on pipeline status and sales performance. Upselling & Service Revenue Growth • Identify opportunities to increase revenue through extended warranties and additional service offerings., • Support the team in identifying and progressing upsell opportunities., • Encourage a proactive approach to customer lifecycle management System Upgrades Support • Work with commercial and service teams to identify upgrade opportunities within the installed base., • Support the development and tracking of upgrade-related opportunities., • Assist in aligning service sales activities with broader commercial plans. Process & Ways of Working • Help develop and implement structured processes for service sales activities., • Ensure consistent use of CRM tools and reporting systems., • Improve processes to make service sales activities more efficient and easy to manage., • Support the introduction of standard approaches across the region. Cross-Functional Collaboration • Work closely with service operations, field service, and commercial teams., • Ensure alignment between service delivery and service sales commitments., • Support resolution of customer issues that impact service contracts or renewals. Customer Service Leadership Team Contribution • Contribute as part of the European Customer Service Leadership group., • Provide updates on service sales performance, risks, and opportunities., • Support broader service initiatives and continuous improvement activities. Basic requirements: • Bachelor’s degree in business, engineering, healthcare technology, or a related field, or an equivalent combination of education and relevant professional experience., • 3–6 years of experience in service sales, contract sales, or related commercial roles., • Experience working with service contracts or lifecycle service offerings., • Previous experience in a team leader or senior sales role., • Strong organizational and pipeline management skills., • Good communication and stakeholder management abilities Desired requirements: • Experience in medical imaging, healthcare technology, or capital equipment industries., • Experience working across multiple European markets., • Familiarity with CRM systems and sales reporting tools., • Ability to work in a structured and process-driven environment., • Strong commercial awareness with the ability to identify upsell opportunities

This role will require international travel to Australasia for extended periods of time. We are receiving multiple requests to support our partners in the Baggage Handling Sector. If you are experienced in BHS, and would be interested in international projects, then look no further. We are seeking a skilled Controls Engineer to support the commissioning of automated baggage handling systems. The successful candidate will work with Rockwell PLC platforms to develop, troubleshoot, and optimize control systems used within a fast-paced airport or logistics environment. This role involves close collaboration with mechanical engineers, maintenance teams, and operational staff to ensure system reliability, performance, and safety. Start: ASAP Role: Controls Engineer System (PLC): Rockwell Industry: Baggage Handling Systems Duration: Depending on project, between 9-18 months Location: most projects will be done internationally in Australasia Key Responsibilities • Design, develop, and maintain PLC control systems for automated baggage handling equipment using Rockwell systems., • Troubleshoot and resolve control system faults to minimize downtime and maintain operational performance., • Support commissioning and integration of conveyors, sortation equipment, scanners, and associated automation systems., • Modify and optimize PLC logic to improve system efficiency, reliability, and throughput., • Diagnose electrical and automation faults using engineering tools and system diagnostics., • Participate in system upgrades, expansions, and continuous improvement initiatives., • Work closely with maintenance teams to support operational issues and provide technical expertise., • Produce and maintain technical documentation including functional descriptions, I/O lists, and control narratives., • Ensure compliance with safety standards and operational procedures., • Provide on-site technical support during testing, commissioning, and operational phases. Required Skills and Experience • Degree or equivalent qualification in Electrical Engineering, Automation Engineering, or a related discipline., • Proven experience with PLC programming and troubleshooting using Rockwell control systems., • Experience working within airport baggage handling systems., • Strong understanding of industrial automation, control systems, and material handling equipment., • Ability to read and interpret electrical schematics and control system documentation., • Strong problem-solving skills and the ability to work under operational pressure., • Effective communication and teamwork skills., • You are okay with working internationally for longer periods of time Desirable / Beneficial Experience • Knowledge of conveyor and sortation control systems., • Experience with HMI and SCADA systems is beneficial., • Familiarity with industrial communication networks (EtherNet/IP, Profibus, Modbus, etc.)., • Experience with commissioning and system integration projects. Personal Attributes • Methodical and detail-oriented approach to engineering tasks., • Ability to work independently and as part of a multidisciplinary team., • Strong commitment to safety and operational excellence., • Flexible approach to working hours when supporting commissioning or operational requirements.