Engineering jobs in Newton AbbotCreate job alerts

Fire and Security Systems Installation/Service Engineer Salary: Negotiable depending on experience On Target Earnings: £42,000 – This figure represents the average potential earnings, including overtime, call-outs, travel pay and bonus payments We are currently looking to recruit an experienced fire and security engineer to assist with scheduled maintenance, repairs and installations throughout the south west area. The candidate will have a minimum of 3 years’ experience across all disciplines, be self-motivated, well presented, ambitious, organised and have the desire to progress within this growing company. Confidence and excellent verbal and written communication skills are also essential. The candidate should be familiar with good health & safety practices and must be entirely trustworthy. Employment will be subject to successful completion of security vetting. Package: Fully equipped company van with Fuel Card Mobile Phone & Laptop Uniform & PPE Health Scheme Pension Scheme - Standard Government Scheme Holiday - 20 Days plus Bank Holidays Commission for New Business Working Hours: Mon-Fri 08:30 to 17:00 (excluding bank holidays) including 30 min lunch break Authorised overtime when required including call outs Role & Responsibilities: To attend and undertake repairs, installations and scheduled maintenance of fire and security systems throughout the south west area to include: • Routine inspections in accordance with current British Standard recommendations including completion of company documentation (including electronic documents) and identification of any non-conformities / variations where applicable., • Un-scheduled site attendances (corrective calls) to diagnose and rectify faults. A ‘first time fix’ approach should be adopted in order to minimise the need for return visits., • Completion of small works projects such as panel changes or the addition of equipment to existing installations., • Assisting with larger installations when needed, • Provision of out of hours emergency cover within the call-out rota (currently 1 week in 5) The Company Directors Systems: Fire Alarms, Fire Extinguishers, Intruder Alarms, CCTV, Access Control Services: Installation Service and Maintenance Fault Finding Commissioning Call outs Manufacturers: Fire: Kentec, Advanced, EMS, Cygnus, Kidde, VESDA, Apollo, Hochiki Intruder: Texecom, Ajax, Menvier, Scantronic, Galaxy CCTV: Hikvision, UNV Access Control: Paxton, TDSI, Videx, CDVI

Role:Multi-Skilled Maintenance Engineer Salary:£40,000 to £42,000 per annum, plus benefits and further up-skilling & training opportunities to excel as an engineer Shifts:4 on 4 off 12-hour Shifts, rotation of days and nights Location:Torquay Area. Commutable from Exeter, Plymouth, Totnes, Okehampton, Moretonhampstead, Dartmouth, Farringdon, Exmouth and surrounding areas Company We are seeking a Mult... ZIPC1_UKTJ

Internal Sales & Commercial Coordinator Engineering Products Office Based South Devon £30,000 £37,500 Bonus Benefits A well-established specialist engineering manufacturer is seeking a commercially organised individual to join its sales office team. This is a structured, office-based role focused on managing distributor relationships, coordinating supply lines, and supporting the growth of a define... ZIPC1_UKTJ

Customer Solutions Engineer (Hydraulics / Pneumatics) Full training provided to become a Technical Sales Specialist £45,000 - £50,000 + Progression + Training + Company Bonus + 25 Days + Bank Holidays + Company Car + Christmas Shutdown + Free On-Site Parking Newton Abbot Are you technically experienced with various hydraulic and pneumatic systems and are now looking for an exciting opportunity within a well-established manufacturer that supports a wide range of industries including the Defence and Aerospace markets? Do you want to step into a sales role within a company that offers full training on the internal CRM systems and sales training, to help you develop into a Senior External Sales Specialist? This company was established over four decades ago and in that time grew extensively across the UK, and into mainland Europe. The company offers the manufacture, servicing, and repair of an extensive range of hydraulic and pneumatic systems. This position is for the site in Newton Abbot. You will be the technical point of contact for clients across Devon and Cornwall. This role would suit an Engineer that is knowledgeable in hydraulic and pneumatic systems who is now looking for an exciting opportunity within a reputable company. The Role: • Once past training, travel to client sites across Cornwall and Devon, • Be involved in projects from inception to completion, • A blend between account management and business development, • Provide technical advice and support to clients regarding their hydraulic and pneumatic products, • Document all sales and customer activities in the company's CRM, • Experience with various hydraulic and pneumatic systems

Air Conditioning Engineer – South West (Devon, Cornwall, Somerset) - £40,000-£43,000 • £40,000 - £43,000 per year (negotiable based on experience), • Opportunities to Boost Earnings: Overtime & Call Out Rota Available, • Company Vehicle, Pension Scheme, Fuel Card, Laptop, Mobile Phone, and Travel Pay, • Full-time, Permanent, Monday to Friday – 08:30 to 17:00, • Excellent training and career growth opportunities Our client is a trusted provider of air conditioning and ventilation solutions, specialising in the installation, servicing, and repair of systems across commercial environments. Known for their technical expertise and commitment to quality. This is a great opportunity to join a company that genuinely values its team. You’ll be supported with ongoing training, exposure to the latest technologies, and clear career development opportunities in a positive and collaborative work environment. If you're a skilled engineer ready for the next chapter in a rewarding and secure career, this could be the perfect fit. Role Responsibilities- Air Conditioning & Ventilation Engineer • Install and commission VRV’s/VRF’s/Splits & Multi Splits, • Troubleshooting tasks, conducting field service work, and demonstrating excellent communication skills while interacting with clients and colleagues, • Ensure the highest quality standards are met on every project, • Communicate effectively with clients and the administration team, • Complete annual maintenance of air conditioning systems, • Work collaboratively with other engineers, offering support and mentorship to junior team members Required Skills & Experience- Air Conditioning & Ventilation Engineer • Familiarity with multiple manufacturers and system types, • Holds 2079 F-GAS Certification, • Holds an NVQ Level 2 in Air Conditioning, • Eagerness to learn and adapt to new systems, • Full UK Driving Licence (or equivalent), • Strong work ethic, positive attitude, and self-motivation Don’t miss out on this fantastic opportunity – Apply Today! Get Staff acts as an employment agency for permanent recruitment and as an employment business for the supply of temporary workers. If you haven’t been contacted within 7 days, please consider your application unsuccessful.

The role: Carry out routine PPM tasks and reactive works in commercial and industrial properties. Responding to reactive call outs and fault finding on boilers and heating systems. Installation of new plant and equipment. Participate in an out of hours stand by rota.(Approx 1 in 14 weeks) About you: You will hold the relevant Commercial Gas Safe qualifications, certifications and tickets (Level 3 C&... ZIPC1_UKTJ

We currently have a vacancy for a self-employed service engineer based in the Newton Abbot area but involving travelling throughout the South West region. We operate a very long established family-run plumbing and electrical service business and require a highly motivated, professional person with good customer service skills to carry out on-site repairs and servicing of bathroom, shower and water-heating equipment, on behalf of many leading national bathroom manufacturers and commercial clients. The position is self-employed but with a minimum earnings guarantee plus an excellent O.T.E potential. Experience in plumbing/electrics/domestic appliance repairs preferred but full training given. The successful applicant will need to be honest, reliable, hard-working and possess excellent communication and customer service skills. Please apply in writing including your C/V.

Internal Sales & Commercial Coordinator Office Based | South Devon £30,000 – £37,500 + Bonus + Benefits A well-established specialist engineering business is looking to appoint a commercially focused individual to join its sales office team. The company operates within a niche technical sector and works internationally with distributors and industry partners. The role supports the growth of a defined product range and involves coordinating sales activity, managing distributor relationships, and ensuring the smooth flow of orders from enquiry through to delivery. This is not a design engineering role. Instead, it would suit someone who enjoys working in a technical environment, is naturally curious about how products work, and can quickly learn new information. The Role • Managing quotations, pricing and sales orders, • Supporting and developing distributor relationships (UK and international), • Coordinating purchasing and stock with overseas suppliers, • Liaising internally with production and procurement teams, • Proactively identifying and contacting potential distributors and partners, • Maintaining CRM records, forecasts and reporting The Person • Background in internal sales, sales support, account management, customer service or commercial administration, • Enjoys working in a technical or engineering environment, • Able to quickly learn product information and communicate it confidently, • Bright, organised and commercially minded, • Calm and professional communicator with good listening skills, • Looking for a long-term, stable opportunity within a close-knit team

Your new company This company is a well-respected charity and registered social landlord dedicated to providing high-quality, affordable homes and supporting thriving communities across South Devon. As a non-profit housing provider, they deliver a full range of housing and tenant support services, including property repairs and maintenance, rent management, financial advice, and neighbourhood development initiatives. Its work is focused on raising service standards, adapting to evolving community needs, and helping residents access opportunities that improve their wellbeing and quality of life. The business works closely with tenants, partners, and local stakeholders to build sustainable, inclusive communities. Your new role The purpose of this role is to lead the development and operation of the organisation's data engineering capability, ensuring that data is efficiently extracted from source systems, transformed through robust ETL/ELT processes, and loaded into well-structured data models that support strategic reporting, analytics, and Business Intelligence. The post-holder will develop scalable pipelines, improve data quality, enhance data models, and strengthen data governance and standards across the organisation. Through collaboration, knowledge sharing, and the application of modern data engineering practices, the role will drive improvements in organisational data maturity and contribute to the successful implementation of the data strategy.To work within the Company's Equality and Diversity Policy, Health and Safety Policy, Customer Service and Performance Policies ensuring that these are complied with throughout all activities within the scope of this role to ensure the highest standards of customer care.Ensure that all activities undertaken are carried out to the highest standards of integrity and professionalism in accordance with the Company's policies and procedures.What you'll need to succeed To thrive in this role as a Data Engineer, you'll bring a strong blend of technical expertise, analytical capability, and a commitment to delivering high-quality data solutions that support organisational goals.A relevant degree (or equivalent experience gained through progressively responsible data roles); or a formal professional qualification within Data Engineering.Experience as a Data Engineer or in a similar technical data role.Experience designing, building, and maintaining ETL/ELT pipelines.Hands-on experience with orchestration tools such as SSIS, Azure Data Factory, or similar.Practical experience implementing data validation, exception reporting, reconciliation checks, and data quality rules.Strong ability to transform, cleanse, and manipulate datasets using SQL/T-SQL.Experience producing clear technical documentation, data flows, and specifications.Ability to design and implement dimensional data models (e.g., Desirable:Experience in the Social Housing sector.Exposure to BI tools such as Power BI or SSRS.Experience with CI/CD, automated testing, or DataOps practices.Strong SQL and T-SQL development skills, including performance optimisation.A solid understanding of relational databases and technologies such as Azure SQL Database.Understanding of data lifecycle management.Knowledge of RBAC and secure data access management principles.Understanding of data ethics, privacy, confidentiality, and regulatory frameworks such as GDPR.Willingness to support and upskill colleagues in data engineering concepts.A proactive, self-motivated approach and a commitment to high-quality service delivery.Ability to identify gaps in your own knowledge and seek opportunities for professional development.Desirable:Knowledge of Python for data manipulation, profiling, and data quality tasks.What you'll get in return Hybrid Working Model - 1 day a week in the office. Pension Model - Company 1.5 X your contribution. Hays Specialist Recruitment Limited acts as an employment agency for permanent recruitment and employment business for the supply of temporary workers. By applying for this job you accept the T&C's, Privacy Policy and Disclaimers which can be found at hays.co.uk

Fire and Security Systems Installation Engineer £34k-£42k doe On Target Earnings: £42,000 – This figure represents the average potential earnings, including overtime, call-outs, travel pay and bonus payments My client are currently looking to recruit an experienced fire an

How It Works Step 1 – AI Engineering Fundamentals Start with the basics of AI, including neural networks and large language models, to build a solid foundation in AI engineering. Step 8 – AI Prompt Engineering Master prompt engineering, learning how to craft effective prompts for controlling AI

A leading energy service provider in Torquay is seeking skilled Dual Fuel Engineers to join their team. Candidates should have relevant certifications, a driving license, and experience in fitting dual fuel meters.

Do you want to work for a supplier directly with uncapped earnings? If so, we have an opportunity for you to join the Energy supplier of the year 2025, as part of Utilita’s award-winning Field services team as a Dual Fuel Smart Meter Engineer. As a Dual Fuel Smart Meter Engineer, you will be the f

Production Supervisor As a Production Supervisor, you will be responsible for overseeing the performance of the manufacturing line within your designated zone. You will lead and support your team to achieve key operational metrics, while ensuring the highest standards of Health & Safety, Quality, Continuous Improvement, and Environmental Compliance are consistently maintained. Key Duties and Responsibilities • Ensure company policies, procedures, and key performance indicators (KPIs) are fully implemented and achieved., • Develop, implement, and manage production plans, schedules, and strategies to meet operational objectives., • Coordinate and assign daily tasks to production staff, ensuring all training and competency requirements are met., • Conduct training needs analyses and manage skill development as part of daily operations., • Promote effective communication between shifts, ensuring accurate and detailed handovers., • Drive Continuous Improvement (CI) initiatives to enhance efficiency, safety, and quality performance., • Act as Deputy to the Production Manager, providing cover during holidays or absences. Salary: £29k - £35k (Experience dependant) Hours: 6am-4pm Mon – Thurs (40 hours)

Technical Sales This is an exciting opportunity for someone looking to take the next step in a technical sales career. The role offers the chance to develop existing skills while contributing to the continued growth of a well-established business, with clear opportunities for professional development over time. The position will be primarily office-based in the South West, with occasional visits to customers and industry events. You will work as part of a supportive and motivated sales team, maintaining regular contact with customers to understand their needs and provide appropriate solutions. The role will involve managing technical enquiries, preparing quotations, processing orders through internal systems, and assisting with the resolution of technical issues as required. The company is a long-established manufacturer supplying specialist engineered products to customers in a variety of industries, both in the UK and internationally. All design, manufacturing and assembly is carried out in-house to ensure consistently high quality standards. Salary • £38,000-£44,000, • +Early Finish Friday (1pm) + 5 Weeks Holiday + Bank Holidays

Senior Prototype Engineer (CNC / R&D Workshop) £40,000 – £50,000 + Benefits South Devon (commutable from Torquay / Newton Abbot) Full- Time / Permanent Are you a hands-on problem solver who loves turning ideas into real, working prototypes? Do you thrive in an environment where no two days are the same: machining, fabricating, building, testing, and innovating? We’re supporting a specialist engineering manufacturer in South Devon who are expanding their R&D capability. They’re looking for a multi‑skilled Senior Prototype Engineer to take ownership of early‑stage development work, machining activities, and one‑off technical challenges across metals, composites, and experimental assemblies. This is a practical, workshop‑based role where you’ll be the go‑to person for creating prototypes, tooling, fixtures, jigs, and proof‑of‑concept solutions. YOUR NEW ROLE Designing, machining, and fabricating prototype components and development tooling Producing CNC programs and machining parts to tight tolerances Building jigs, fixtures, and bespoke assemblies for trials and testing Working with metallic and composite materials Troubleshooting mechanical and basic electrical elements within prototypes Leading small R&D projects from concept through to functional prototype Collaborating with Engineering and Production on DFM, feasibility, and process development Managing day‑to‑day workshop activities, tooling, and safe working practices ABOUT YOU Strong background as a machinist, toolmaker, prototype engineer, or similar Confident CNC programming and machining skills Hands‑on fabrication, assembly, and problem‑solving ability Experience working with metals and ideally composites Ability to interpret drawings, models, and specifications Practical electrical knowledge (wiring, sensors, low‑voltage systems) Someone proactive, creative, and comfortable working independently on varied tasks Reference Number: WS9 To be considered for this position or other opportunities, contact Tash Johnson at Equal Resourcing Ltd or click "Apply Now." Equal Resourcing Ltd is serving as a recruitment agency for this job opening. Your application implies your consent for us to process your data and communicate with you concerning this application and associated services, in compliance with GDPR regulations. Equal Resourcing Ltd may use AI-assisted tools to support internal administrative tasks and document drafting. We do not upload personal data or use AI tools to make hiring decisions. Our client can only consider applications from candidates with a valid legal right to work in the United Kingdom. To view a list of job openings, please visit the Equal Resourcing Ltd website. Please note that not all recruitment positions are listed. For the most current opportunities, we recommend contacting us directly

Hey our staff have recently got a pay increase, these are our NEW competitive rates we can offer you, come and work for Centristic!” Welder/Fabricators Needed – Experienced or Trainees Full-time, Permanent Positions | Newton Abbot, Devon Centristic Ltd is a thriving business with exciting new contracts. We are looking to expand our team of Welders/Fabricators at our busy Newton Abbot workshop. About the Role We are seeking both experienced Welders/Fabricators and motivated trainees/apprentices who are keen to build a career in welding and fabrication. * Experienced applicants should have: * * Strong MIG/MAG welding skills * Ability to work independently from engineering drawings * Experience in heavy structural steel and plate work fabrication * (Coding certification is an advantage, but training can be provided) * Trainees/apprentices will benefit from: * * Full training and mentoring from experienced fabricators * Career progression and development opportunities * A supportive team environment What We Offer * Competitive salary: £33,690 – £38,581 * GROSS OTE: £43,890 – £50,160 * Day shift hours: 07:00 – 15:30 * Free onsite parking * 20 days annual holiday, plus bank holidays * Nest pension scheme Start Date / Requirement to Work Immediate starts available. We do not offer visa sponsorship so you must be eligible to live and work in the UK to apply. How to Apply Contact HR or click on apply now

Sales Applications Engineer Job Purpose: • Represent the company in a professional manner to internal and external stakeholders., • Support the development and delivery of projects, including the sale of technical equipment and associated long-term service agreements, with a focus on maintaining commercial viability., • Provide timely technical and commercial assistance to customers and the wider sales team., • Act as a key point of contact for coordinating project-related communications between clients, internal departments, subcontractors, and other relevant parties., • Prepare and submit budgets, quotations, and tenders aligned with client expectations and business goals., • Identify, document, and manage project risks, including pricing mitigation strategies where required. Main Responsibilities: 1. Supply clients or representatives with technical and commercial information related to the company's products and services., 2. Conduct initial evaluations of potential projects with sales personnel to assess suitability and define sales strategies., 3. Prepare detailed technical and commercial documentation for use in budget proposals and formal quotations., 4. Manage project costing by gathering necessary data from internal teams or external suppliers, including cash flow projections and equipment specifications., 5. Maintain direct communication with clients to address inquiries or requests related to proposals. This may involve attending client meetings or adjusting scope and specifications based on feedback., 6. Lead the identification and management of project-related risks, and participate in risk review sessions to ensure alignment with broader business objectives., 7. Visit customer sites to assess project requirements, including site layout, installation considerations, and logistical constraints., 8. Prepare contract documentation, reviewing legal and commercial terms to ensure compliance with client and company expectations., 9. Upon project confirmation, compile relevant handover documentation and participate in internal project briefings to ensure a smooth transition to the delivery team, providing context on project background and deliverables. Salary - £40-60k DOE Nine Day Working Fortnight Office based with occasional travel

Role Summary My client are seeking an experienced Production Manager with a strong background in mechanical engineering. The role requires proven leadership and supervisory skills to manage people, processes, and workflows in a technically demanding workshop environment. Key Responsibilities Enforce health and safety standards and maintain a clean, organised workshop Lead, motivate, and develop workshop personnel Control workflow, labour, materials, and equipment scheduling Plan and manage production activities to meet quality standards and delivery deadlines Liaise closely with internal sales, engineering, procurement, and logistics teams Manage relationships with external suppliers and partners Skills & Experience Formal engineering qualification (Mechanical Engineering or similar) Strong knowledge of manual and CNC machining, and fabrication processes Previous experience in a production or workshop management role Excellent organisational, leadership, and problem-solving skills Salary & Benefits • £40,000+, • 25 days holiday + Bank holidays, • Monday-Thursday: 8:00am – 4:30pm with 30 min lunch break (12:30pm-13:00pm), • Friday: 8:00am – 3:30pm with 30 min lunch break (12:30pm-13:00pm)

Mechanical Fitter Act as a member of the Turbine Repair team to carry out all mechanical aspects of servicing, maintenance, repair and overhaul works necessary to maintain a customer fleet of industrial turbines Key Responsibilities * Strip down and rebuild of gas turbine engines * Carry out thorough cleaning of engine, associated components and detail parts using chemical/ultrasonic/manual methods and carry out subsequent, inspections and dimensional assessments utilising videoscopes, microscopes, micrometers, DTI’s, CMM’s, height gauges and other precision equipment. * Inspection of turbine and compressor blades and carry out any necessary rectification including dressing, grit blast and glass peen as required. Qualifications and Skills * Mechanical Engineering apprenticeship or 5 years related experience * BTEC National Certificate or City & Guilds - Mechanical * Competent in use of hand and power tools including power/air/impact drills etc * Competent in the use of inspection/measuring equipment and techniques Experience * Experience of general mechanical fitting in a comparable industry eg, aerospace, marine, automotive or heavy plant * Working knowledge of power generation systems Salary & Hours Starting salary £32,009.73 per annum, rising to £33,477.00 per annum after successful completion of probation period Nine Day Fortnight: 07.30 to 16.15 Monday to Thursday 07.30 to 16.00 every other Friday

Sales Applications Engineer Job Purpose: • Represent the company in a professional manner to internal and external stakeholders., • Support the development and delivery of projects, including the sale of technical equipment and associated long-term service agreements, with a focus on maintaining commercial viability., • Provide timely technical and commercial assistance to customers and the wider sales team., • Act as a key point of contact for coordinating project-related communications between clients, internal departments, subcontractors, and other relevant parties., • Prepare and submit budgets, quotations, and tenders aligned with client expectations and business goals., • Identify, document, and manage project risks, including pricing mitigation strategies where required. Main Responsibilities: 1. Supply clients or representatives with technical and commercial information related to the company's products and services., 2. Conduct initial evaluations of potential projects with sales personnel to assess suitability and define sales strategies., 3. Prepare detailed technical and commercial documentation for use in budget proposals and formal quotations., 4. Manage project costing by gathering necessary data from internal teams or external suppliers, including cash flow projections and equipment specifications., 5. Maintain direct communication with clients to address inquiries or requests related to proposals. This may involve attending client meetings or adjusting scope and specifications based on feedback., 6. Lead the identification and management of project-related risks, and participate in risk review sessions to ensure alignment with broader business objectives., 7. Visit customer sites to assess project requirements, including site layout, installation considerations, and logistical constraints., 8. Prepare contract documentation, reviewing legal and commercial terms to ensure compliance with client and company expectations., 9. Upon project confirmation, compile relevant handover documentation and participate in internal project briefings to ensure a smooth transition to the delivery team, providing context on project background and deliverables. Salary - £40-60k DOE Nine Day Working Fortnight Office based with occasional travel

Ive got a great opportunity to work for a family run air conditioning contractor in South Devon. They are very well known in the area for their air conditioning services and are well established. They are a well funded, safe, sturdy, secure, an all round great air conditioning company to work for who look after their engineers. Also there is no call out rota to make sure their engineers get a better work / life balance Due to expansion they are recruiting for an air conditioning engineer you will be:- • Providing service, maintenance and a little bit of installation on commercial air conditioning, • Working on all commercial air conditioning equipment - splits, VRV, VRF, multi splits, also ventilation and heat pumps if you have the experience, • Working with offices, hospitals, schools, council buildings and shops, • Covering South Devon up to Taunton and parts of south Cornwall Salary and Benefits of an air conditioning engineer • 38-40k basic depending on experience, • Travel pay, • No call out rota for a better work / life balance but some overtime available if wanted, • Van, phone, fuel card, benefits, • Working for an expanding, family run, long standing, successful air conditioning company. Skills Needed to be a an air conditioning engineer • Living around the south / mid Devon Area – anywhere 20-25 miles around the Torquay area, • Service, maintenance experience working on air conditioning, • F Gas cert, • Having IPAF, CSCS, PASMA or a C&G/NVQ in air conditioning would be very beneficial but experience is more important, • Having any experience with heat recovery systems would be beneficial but is not essential For an immediate interview contact Adam Southam #beaFRONTrunner In the event that you are contacted for a role, please note that as part of the registration process you shall be required to provide FRONTrunner Recruitment Ltd. with proof of identity as well as proof of eligibility to work in the United Kingdom

Quality Control Technician My client is seeking a Quality Control Technician to join a busy fabrication workshop. The role involves ensuring fabricated steelwork meets required quality standards through inspections, measurements, and checks against engineering drawings. Key Responsibilities Inspect steel fabrication work and sign off to specification Check incoming and outgoing materials for quality and compliance Read and interpret engineering drawings and verify measurements Record inspection results and manage goods inwards and outwards documentation Liaise with production and workshop teams to maintain quality standards Requirements Knowledge of steelwork and fabrication (essential) Strong numerical and technical ability Competence in MS Office High attention to detail with good communication and organisational skills Salary Salary dependent on experience What’s on Offer Free onsite parking 28 days annual holiday Pension scheme Day shift: 07:00 – 15:30

Product Specialist My client are seeking a dynamic and ambitious Product Specialist to drive sales growth for its marine accessories product group. Reporting to the Sales Manager, this newly created role offers the opportunity to own the full product lifecycle and develop new revenue streams. It’s a high-impact position suited to someone motivated to build and grow a product category from the ground up. The role involves contributing to the product vision, strategy, and roadmap, with a hands-on approach across planning, sales, and customer experience. Key responsibilities include: Sales and marketing ownership of the product group Market and competitor research Assisting with technical documentation Budget and resource planning Procurement of outsourced components Inventory management to meet demand There is no requirement for a specific qualification; however, experience in Sales and/or Marketing and a solid understanding of Mechanical Engineering are expected. Strong communication skills, an outgoing personality, and well-organised administration abilities are essential. An interest in the marine industry is advantageous but not essential. My client offers: A high-visibility role influencing company growth and revenue The opportunity to shape and lead a strategic product category Competitive compensation, benefits, and career development opportunities within the marine industry Salary: Up to £40,000 • Monday-Thursday: 8:00am – 4:30pm with 30 min lunch break (12:30pm-13:00pm), • Friday: 8:00am – 3:30pm with 30 min lunch break (12:30pm-13:00pm)

Quality Technician – Documentation & Compliance Role Summary The Quality Technician – Documentation & Compliance supports manufacturing operations by developing, maintaining, and improving quality documentation and compliance processes. The role focuses on SOPs, work instructions, training records, and internal audits to ensure consistency and adherence to quality and regulatory standards. This is initially a 4-month fixed-term contract, with potential to develop into a permanent role. Key Responsibilities Create, review, and maintain SOPs, work instructions, and quality documentation. Ensure documentation complies with ISO, regulatory, and internal QMS requirements. Manage document control, including revisions, approvals, and version control. Conduct internal audits of production processes and training records. Maintain accurate quality and training records. Support audit preparation, reporting, and administrative quality activities. Assist with continuous improvement initiatives and new product introductions. Support third-party quality audits as required. Skills & Experience Experience in a manufacturing or quality environment preferred. Knowledge of document control, quality systems, and SOP development. Familiarity with ISO 9001, GMP, or similar standards. Strong attention to detail, organisation, and communication skills. Proficient in Microsoft Office and document management systems. Comfortable working across office and manufacturing environments. Shift: 6am-4pm Monday to Thursday Salary: £28-36K Pro Rata

Steel Erector/Plant Installers Starts immediately. Structural steel/materials handling experience preferable. Working with our experienced site teams in the quarrying and mining environment throughout England, predominantly Midlands area. Erecting steelwork, conveyors and mechanical installations of screens, crushers and the like. Small works up to full large scale projects from initiation to commissioning, performance testing and client sign off. Working to the highest levels of H&S at all times. IPAF, CPCS Slinger, CPCS Telehandler, SPA quarry passport preferred but not essential. All ages considered and training/development available to the successful applicants. Trainee route may be available for the right candidate

Workshop Manager - Salary up to £42,000 DOE plus great benefits. Are you ready to join a well established company that provides market-leading products to the industrial and construction sectors? You will be based at one of their depots near Torquay, where you will be joining a professional engineering team. Benefits of the Workshop Manager Role: Monday to Friday working hours. Salary up to £42k DOE. Company Van 22 days holiday plus bank holidays. Healthcare scheme. Pension scheme. The Company: You would be working for a well-established construction company that prides itself on providing outstanding customer service. To uphold their reputation, they are continuously finding ways to improve and streamline the business, to ensure they keep building a strong brand that many customers can rely on and come back to time and time again. To assist with the workload, they are seeking a motivated and enthusiastic workshop manager who has the ability to work within a fast-paced environment and motivate the team to work efficiently and effectively. Job Role: As the workshop manager, you will be supervising the service engineers in relation to time and workloads and the ability to make clear and accurate decisions. You will need to have experience in parts ordering and effectively plan the logistics for spare parts, tools, transport, and manpower to arrive in a timely manner. You will be hands-on, assisting with any mechanical or electrical work on a range of plant machinery including telehandlers, dumpers or diggers. Checking and processing time sheets and inspection reports. You will need to be able to train and develop your engineering team. To be successful in this role, you will need to have previous experience within the construction industry as a workshop manager, workshop supervisor, workshop foreperson, chargehand, service manager or senior engineer. You will hold a full UK driving license. You will also have previous experience managing engineers within the plant hire, agricultural, vehicle, automotive or HGV background. If you have experience as a plant engineer, and are looking to progress your career, this could be for you. Apply for the workshop manager role today

Handy Person Location: HMP Channings Wood, Greenhill Ln, Denbury, Newton Abbot, TQ12 6DW Salary: £26,575.65 per annum Contract: Permanent, full time - 39 hours per week, Monday to Friday We are seeking a dedicated Escort / Fabric Operative to join our team at HMP Channings Wood, a category C Adult/Male prison. Join a team that is more than just a group of colleagues - we work Monday to Friday as a supportive and driven family, working together to create a safe and nurturing environment. HMP Channings Wood runs like a self-contained city, it takes hundreds of people to keep it functioning, and as the Facilities Maintenance Team we are committed and driving the smooth and safe operation, like a heart that pumps blood through the body, everything we do impacts every prisoner, employee, and visitor, and wider to the families and community. As an Escort / Fabric Operative, you will have the opportunity to work alongside experienced and passionate colleagues who vary from Plumbers, Electricians, Carpenters, Painters, to Cleaners, and Administrators, and others, who are all dedicated to making a positive difference, providing a safe and secure environment for all. If you are looking for a role where you can use your skills to create a better future for others, we encourage you to apply for this compelling opportunity and join us in our mission to promote rehabilitation and positive change and be part of a team that truly makes a difference. We are a Ministry of Justice business and provide critical and time-bound services to HMPPS, and are looking for an Escort / Fabric Operative with any combination of: - Experience of prison environment - Experience of use of hand and power tools - Previous experience of working within a building fabric / Hard FM environment - Up to date First Aid at Work Qualification - Level 2 qualification in English and Maths - Good Health & Safety knowledge. - Excellent organisational, time management and people skills. If this sounds like you, we would like to hear from you! Explore a varied and rewarding career at GFSL. Welcome to careers at Gov Facilities Services Limited (GFSL). Joining us is your chance to help ensure prisons are secure and safe for prisoners and prison staff alike, and to play your part in helping prisoners reintegrate into society. Holidays are 25 days per year plus Bank Holidays, and a range of non-contractual benefits are provided. These range from Death in Service at 4x salary, to access to private GP consultations and an Employee Assistance Programme that offers counselling and information services for preventative care and to help employees in a crisis. There are also a range of financial reward mechanisms and access to retailer discounts. You will find a strong focus on safety, a supportive, inclusive workplace, a competitive benefits package, and real opportunity to build your skills and progress. Explore facilities careers where you can make difference. Pride In People. We're passionate about promoting greater diversity and creating a workplace and culture where all of our employees have a voice that is heard, feel a sense of belonging and are empowered to be their true selves. We recognise the value that every single employee brings to the organisation. Everyone's needs at work are different and we are committed to doing our best to satisfy these differences whilst ensuring consistency and fairness for all. We promise to champion diversity and inclusion with ongoing learning and training, as well as career progression opportunities for everyone. Future Plans. GFSL has been notified by it's shareholder (MOJ) that the provision of FM Services will in future be delivered by the private sector. This means that following a successful procurement process, GFSL's services will complete transfer to a private sector provider/providers no sooner than August 2027. Pride in People - Do the Right thing - One Team An ISO 9001 Certified Company

We are hiring Full Time METER READERS in your postcode now! Role: Meter Reader (gas and electricity only) - working close to home no experience is required. Do you like working in an active outdoor role? Do you want to take control of your schedule and work flexibly? If the answer is yes, then this could be the role for you. As a Meter Reader you will be responsible for collecting data from gas, electricity meters for both commercial and residential properties. You will update meter reads accurately throughout the day on your handheld device, also entering the details on a handheld device at each location and providing excellent customer service. What we offer: · £13.45 - 14.80 per hour basic pay (weekly payment) · Weekly Hours 37.5 hours a week with flexible start and finish times Monday - Friday between 8am - 8pm. · £27,000 to £31,000 average annual earnings. · Progression and promotion opportunities for higher earnings -( 360 technical Meter Reader, Auditor, Gas and Electric Engineer, Field Assistant manager, Field Manager. · Weekly Bonus scheme with earnings up to £250 weekly. · Overtime rates at manager's discretion. · Business expenses reimbursed at 30.05 pence per mile. · Company pension enrolment. · No previous experience required. · Up to 28 days holiday per year. · Full uniform and PPE provided. · Full training will be provided. · Double pay on Bank Holidays What you will need to apply Essential requirements for the role: · UK Driving Licence with no more than 6 points Physically fit and have no issues with bending in tight spaces, lifting or kneeling, climbing stairs, crouching, and walking on average 3-5 miles a day. Happy to work in all weather conditions. Clear DBS check (no unspent criminal convictions) Previous Customer Service experience (preferred not essential)· Access to your own vehicle · Basic Business insurance. Duties: Retrieving data from domestic, commercial, and industrial sites for Gas and Electric Meters, full training will be given.· Carry out visual inspections of associated metering equipment. Charge Point Surveys. Drive and motivation to work in an independent role. Friendly personality with a professional approach to work. Adhering to Health and Safety guidelines at all times.Training: Training is 1 week and will be both classroom-based and field-based with an experienced meter reader, so you get to see the job through a professional's eyes. If interested, please click apply to get started. Should you require any support or assistance, please contact your local Gi Group office. Gi Group Holdings Recruitment Limited are proud founding members of Menopause in business, pledge members for Neurodiversity in business, Disability committed members, Silver status pledge members for the Armed Forces Covenant, and Bronze trail blazers for Racial Equality matters. Gi Group Holdings Recruitment Limited group of companies includes Gi Recruitment Limited, Draefern Limited, Gi Group Recruitment Ltd, INTOO (UK) Limited, Marks Sattin (UK) Limited, TACK TMI UK Limited, Grafton Professional Staffing Limited, Encore Personnel Services, Gi Group Ireland Limited and Kelly Services (UK) Ltd. Gi Group Ireland Limited are acting as an Employment Agency in relation to this role. We are committed to protecting the privacy of all our candidates and clients. If you choose to apply, your information will be processed in accordance with the Gi Group Privacy Statement. To view a copy and to help you understand how we collect, use and process your personal data please visit the Privacy page on our Gi Group website

Are you an experienced Civil Engineer with a passion for civil engineering and the energy sector?. Lead the production and review of engineering drawings engineering drawings, calculations, specifications, and reports for masonry buildings, steel portal frames, transformer bunds, drainage systems an

At Breedon we are very ambitious, and you’ll be instrumental in helping us to build a bright and sustainable future by assisting our Civil Engineer Manager to provide a safe and efficient delivery of various surfacing and civil engineering projects. Achieving a Level 6 Modern Apprenticeship in Civ

Freedom (Civil) Design is looking for a professional (Engineering Geologist/Geotechnical Engineer) engineer to join our growing team and work on an array of complex and challenging engineering projects that are helping to deliver the country’s Net Zero targets. We’re looking for an experienced G

Support the Technical Manager and Senior Energy Engineer to identify and deliver energy efficiency opportunities.

We're looking for a Day Engineer to join our dedicated Engineering team.

We are looking for a Data Engineer to join our rapidly growing Data team and work closely with stakeholders across the business to deliver high-quality reporting and actionable insights. Data Engineer in a fast-paced environment, coaching all levels, resolving problems and changing peoples minds wit

Network Engineer Placement Programme - No Experience Required Our training will help you kick-start a new career in Network Engineering We are recruiting for companies who are looking to employ our Network Engineer Traineeship graduates to keep up with their growth. Network Engineer Role Once you

Work closely with data scientists, ML engineers, and product teams to align technical solutions with business goals. Strong software engineering skills with experience in Scala, ideally the typelevel stack (bonus if you have exposure to Golang and Python). Our team develops and supports market-leadi

An expanding building services contractor is seeking an experienced HVAC Maintenance Engineer to support the delivery of reactive and planned works across a national portfolio of commercial clients.

Provides technical guidance and mentorship to junior members of the engineering team.

Fire Alarm Engineer Skills and Experience Required. Fire Alarm Engineer - Hertfordshire - £32,000- £44,000 Basic Salary Per Annum. Fire Alarm Engineer Package Overview:.

We are currently recruiting for 2x Control & Instrumentation Commissioning Engineers to work at an Energy from Waste plant in Northwest England. The 2x Control & Instrumentation Commissioning Engineers role comes with a rate of £550-£600 per day. Support control system integration and co

We are recruiting for our client based in Yeovil for an experienced Mechanical Metrology Calibration Engineer to support Transmission operations. Essential Knowledge, Skills & Experience Educated to HNC level (or equivalent) in Mechanical Engineering. Completion of a recognised engineering apprenti

Asset Support Engineer for a Gas Storage Facility based in Alton. As an Asset Support Engineer, you will be responsible for:. Coordinate with Operations, Maintenance, and Engineering teams to track asset status before and after maintenance or inspection activities.

Multi-skilled Maintenance Engineer (M&E) - Foot Mobile.

Senior Project Engineer Yorkshire £55,000 - £70,000 per year, 21 days holiday + bank holidays, standard pension, hybrid working (75% home/office, 25% on-site), mileage reimbursement Are you an experienced engineer looking to lead high-value electricity distribution projects? Do you w

The scheme value is approx £10m and will have multiple engineers and support staff on site. Site Manager with an engineering background for a scheme due to start early March in Stockton-on-Tees. Ideally you will have forged your career to date with a regional or national contractor as a Site E

Mobile Forklift Engineer - £35,000 - £42,000 - West Yorkshire - Van + Fuel card Are you an aspiring Mobile Forklift Engineer with a passion for mechanics and a drive to develop your skills? This is your chance to join a leading team in West Yorkshire, where you'll gain invaluable e

Senior Engineer (Energy Sector) North-East - Willer Contract role (minimum 3-month) £400 / day PAYE only - Inside IR35 A Senior Engineer is required to join an engineering contractor working on a 3-month contract with the potential for extension in the North-East. They are looking for a qu