Environmental specialist jobs in BedworthCreate job alerts

Location: Coventry Contract: 6 Months Rate: £25 - £29 p/h PAYE (Umbrella also an option) We're seeking an experienced EHS Specialist to support our Health, Safety and Environmental programme on a 6-month contract basis in Coventry. You'll play a key role in maintaining compliance, driving continuous improvement, and promoting a positive safety culture within a fast-paced engineering/manufacturing environment. Key Responsibilities: • Support and maintain ISO 14001 and ISO 45001 management systems., • Advise managers and employees on EHS best practices and compliance requirements., • Conduct risk assessments, audits, and incident investigations., • Deliver EHS training and support continuous improvement initiatives., • Monitor environmental performance and support sustainability goals., • Analyse and report EHS metrics and drive corrective actions. About You: • NEBOSH-qualified (or equivalent) with an environmental qualification such as IEMA or IOSH., • Experience managing or supporting ISO 14001 and ISO 45001 systems., • Background in manufacturing, engineering, or industrial environments., • Strong knowledge of EHS legislation and risk management., • Excellent communication and stakeholder engagement skills., • Proactive, organised, and confident influencing change across the business. This is an excellent opportunity to make an immediate impact within a collaborative and safety-focused organisation. Apply now for immediate consideration. If you receive suspicious outreach claiming to be from us, please contact us via the ManpowerGroup website.

About the role Design electrical systems We’re looking for a Senior Electrical Design Engineer to lead the development of advanced electrical systems for next-generation vehicles. You’ll play a key role in shaping the electrical architecture that supports mission-critical platforms, integrating technologies such as EMC, ECM/EECM protection, BOWMAN communication, situational awareness systems and complex automotive sub-systems. This role will provide senior technical input and day-to-day design leadership within the electrical design function, working closely with the Design Manager and supporting the development of existing electrical design capability within the team. This is an opportunity to take ownership of technical solutions, influence design direction and work closely with multidisciplinary teams to turn customer requirements into validated, field-ready systems. If you enjoy solving complex engineering challenges and delivering robust electrical designs with a clear real-world purpose, this could be the role for you. What you’ll be doing You’ll lead the electrical design process from concept through to detailed design, creating specifications, presenting design options and guiding solutions through the full design lifecycle. You’ll ensure electrical systems meet customer requirements, regulatory standards and operational needs, while balancing technical performance, reliability, manufacturability and through-life support. Working closely with engineers, project managers, production teams, suppliers and customers, you’ll translate requirements into validated and verified designs. You’ll be a key customer-facing engineer, able to communicate complex technical information clearly and confidently while influencing decisions across multidisciplinary teams. Your work will include prototype development, test definition, engineering change control and support for the legacy fleet. You’ll also manage CAD data, BoMs and drawing packs through PLM systems, helping ensure design information is accurate, controlled and ready for manufacture. Creo experience is a mandatory requirement for this role. You must have demonstrable, hands-on experience using PTC Creo in a professional design environment. Candidates must be able to evidence practical Creo experience on their CV; candidates without Creo experience will not be considered. Our team embraces modern technologies, including AI-assisted tools, to work smarter and deliver better results. Candidates should either have experience using AI tools or demonstrate a willingness to learn and apply them in their role. What we’re looking for We’re looking for an experienced electrical design engineer who can take ownership of complex design activities, work confidently with customers and stakeholders, and deliver robust engineering solutions in a demanding technical environment. Essential Experience designing electrical cables, harnesses and associated routing or integration solutions for complex products or vehicle systems. Demonstrable, hands-on experience using PTC Creo — this is a must-have skill and must be clearly shown on your CV Strong experience working in a design office using 3D CAD software Experience using PLM software, ideally Windchill 12.0 Strong understanding of electrical schematics and cable/harness design to BS8888 Knowledge of configuration control and engineering change management, ideally including Def Stan 05-57 Experience in product validation and verification, including environmental requirements Strong systems engineering understanding Experience producing Design FMEAs and applying robust engineering practices Excellent communication skills, with the ability to work with internal and external stakeholders Proficiency in Microsoft Office Full UK Security Clearance (SC), or eligibility to obtain it through the formal UKSV process Desirable Experience designing specialist vehicle electrical sub-systems Familiarity with EMC, ECM/EECM, BOWMAN communication and situational awareness systems Experience using the Creo Cabling Module or equivalent cable and harness design tools. Experience managing product lifecycle and supply chain interaction * Experience using SolidWorks or Arcadia Excellent package & opportunity. Call Rachel NOW or apply online with CV Library

Are you an experienced Workshop Technician? Role of Workshop Technician HR Employment Bureau are currently recruiting for an experienced Vehicle Workshop Technician to join a specialist engineering team supporting prototype and development vehicle programmes. This role is ideal for a technician with strong diagnostic capabilities who can confidently investigate, fault-find, and repair complex vehicle issues across mechanical, electrical, and powertrain systems. You will be working on prototype vehicles that have returned from testing, often requiring detailed investigation and independent problem-solving to identify root causes and implement effective repairs. A strong understanding of internal combustion engines (ICE) is essential, including experience diagnosing and repairing engine-related faults, fuel systems, cooling systems, emissions systems, and associated vehicle functions. Key Responsibilities of Workshop Technician Diagnose and rectify complex mechanical, electrical, and vehicle system faults on prototype and development vehicles. Investigate issues identified during vehicle testing and determine effective repair solutions. Carry out repairs, modifications, component replacements, and rework activities. Diagnose faults relating to internal combustion engines, powertrain systems, driveline components, fuel systems, cooling systems, and emissions equipment. Use manufacturer diagnostics, specialist software, and workshop equipment to identify root causes of vehicle concerns. Support software updates, system calibrations, and vehicle commissioning activities. Prepare, maintain, and support prototype and development vehicles for testing programmes. Work closely with engineers to provide technical feedback and support ongoing vehicle development activities. Record findings, repairs, and corrective actions accurately. Ensure all work is completed in line with Health & Safety, environmental, and quality requirements. Requirements of Workshop Technician NVQ Level 3 / City & Guilds in Vehicle Maintenance & Repair or equivalent. Minimum 3 years' experience within an automotive workshop, prototype, development, or manufacturer environment. Proven experience in vehicle diagnostics, electrical fault finding, and mechanical repair. Strong knowledge of internal combustion engine systems, including engine operation, fuel systems, cooling systems, emissions systems, and associated fault diagnosis. Ability to confidently investigate and resolve complex vehicle faults independently. Experience working with prototype, development, pre-production, or low-volume vehicles is highly desirable. Good understanding of vehicle electrical architecture, CAN systems, and modern automotive technologies. Experience using automotive diagnostic software, manufacturer tooling, and workshop equipment. Knowledge of hybrid and electric vehicle systems would be advantageous. Full UK Driving Licence. Competent using Microsoft Office and workshop management systems. About You You are a skilled technician who enjoys diagnosing and solving challenging vehicle faults. You can work independently, are comfortable managing your own workload, and have the confidence to investigate issues beyond simple component replacement. You take pride in delivering high-quality repairs, have strong mechanical and electrical diagnostic skills, and enjoy working within a fast-paced engineering environment where no two days are the same. Why Join? Work on cutting-edge prototype and development vehicle programmes. Join a highly skilled engineering team within a leading automotive environment. Long-term contract opportunity. Immediate start available. Competitive contract rate. Opportunity to work alongside experienced engineers and development specialists. If you're an experienced Vehicle Workshop Technician with strong diagnostic expertise, internal combustion engine knowledge, and experience repairing complex vehicle faults, we'd love to hear from you. Apply today with your latest CV. TPBN1_UKTJ

A specialist engineering and advanced manufacturing business is looking for an experienced EHS Lead to take ownership of Environmental, Health & Safety across its industrial manufacturing operation in Coventry. This is a high-risk, technically demanding manufacturing environment, operating 365 days a year, with around 90 people based on site. The operation involves complex industrial processes and challenging working conditions, including working at height and specialist access into furnaces. This is a standalone position, making it an excellent opportunity for someone who enjoys being hands-on, visible and influential rather than operating purely from an office. You will have genuine ownership of the site's EHS agenda and will be responsible for embedding a proactive safety culture across the operation. Monday to Thursday: 8:00am – 4:30pm, Friday 8:00am – 3:30pm Competitive Salary + Benefits + Bonus Coventry • Own and lead EHS across the site, ensuring compliance with UK legislation, company standards and relevant management systems, including ISO 14001 and ISO 45001., • Embed a strong safety culture across the operation, working closely with the shop floor, supporting Safety Champions and delivering workshops, training and engagement initiatives., • Lead the identification and management of risk, including risk assessments, process safety, HAZID, HAZOP, incident investigations and the implementation of effective corrective actions., • Provide practical EHS guidance across the business, translating legislation and regulatory requirements into clear, workable processes, procedures and safe systems of work., • Manage EHS requirements around contractors, projects and site development, including contractor controls, CDM requirements and ensuring EHS is embedded into the new structure being developed on site., • Drive continuous improvement in EHS performance, monitoring incidents, near misses, audits and compliance while working with managers and employees to continually raise safety standards We are looking for someone who is comfortable operating in a high-risk engineering or manufacturing environment and who can combine strong technical EHS knowledge with an engaging, practical approach. You will need to be someone who is comfortable getting onto the shop floor, talking to operators, challenging unsafe practices and working collaboratively to find solutions. You will ideally have: • NEBOSH Certificate or Diploma, or an equivalent recognised EHS qualification., • Environmental knowledge/qualification, ideally IEMA or equivalent., • Strong experience within an engineering, manufacturing or similarly high-risk industrial environment., • Proven experience implementing and improving EHS management systems., • Strong knowledge of UK health, safety and environmental legislation., • Practical experience with process safety, HAZID and HAZOP., • Experience with risk assessment, incident investigation, near-miss management and change management., • Experience managing contractors and ensuring appropriate controls are in place., • CDM experience would be highly desirable, particularly given the development work taking place on site., • Experience working with ISO 14001 and ISO 45001 management systems., • The ability to take legislation and turn it into practical, understandable processes for the workforce., • Strong communication and influencing skills, with the confidence to engage with everyone from operators through to senior management., • A hands-on, approachable and visible style., • The ability to work independently and take ownership of an EHS agenda with minimal supervision., • Strong problem-solving skills and a continuous improvement mindset., • Pension Scheme up to 10% company contribution, • Employee Health & Wellbeing Programme, • Employee Discounts, • Career development within a high-performing aerospace environment, • Bonus This is an opportunity to take genuine ownership of EHS within a technically advanced manufacturing environment where safety is fundamental to the operation. The successful candidate will become a key figure on site — building relationships, influencing behaviours and putting the right systems and controls in place to ensure the operation remains safe, compliant and continuously improving. If you are an experienced EHS professional who enjoys being hands-on, working directly with the shop floor and making a tangible difference within a high-risk manufacturing environment, this could be an excellent opportunity. #J-18808-Ljbffr

Design the electrical systems behind vehicles that protect lives. Our client, a specialist manufacturer supplying high-priority defence programmes, is looking for a Senior Electrical Design Engineer to lead development of advanced electrical systems for next-generation armoured military vehicles. You’ll shape the electrical architecture behind mission‑critical platforms, working across EMC, ECM/EECM protection, communications systems, situational awareness and complex automotive sub‑systems. You’ll act as the senior link between the Design Manager and the existing electrical design engineer, providing day‑to‑day technical leadership and senior input within the team. This role combines hands‑on CAD design with real customer‑facing responsibility. You’ll present concepts and critical designs at customer reviews, and represent electrical design independently in meetings, primarily with the MOD. If you want ownership of technical solutions and enjoy translating customer requirements into validated, field‑ready systems, this is a genuine leadership opportunity within the design function. • Discretionary performance bonus, • 25 days’ holiday + 8 bank holidays, with a Holiday Purchase Scheme, • Two weeks’ paid leave for Reservists and Cadets, plus paid leave for CFAVs, • Pension scheme, 9% combined employer/employee contribution, • Career development within a global business, • Lead the electrical design process from concept through detailed design, producing specifications and guiding solutions through the full design lifecycle, • Ensure electrical systems meet customer requirements, regulatory standards and operational needs, balancing performance, reliability, manufacturability and through‑life support, • Work closely with engineers, project managers, production, suppliers and customers to translate requirements into validated, verified designs, • Create 3D cable and harness models for incorporation into 2D drawings, • Manage CAD data, BoMs and drawing packs through PLM systems, • Support prototype development, test definition, engineering change control and the legacy fleet, • Hands‑on, demonstrable experience using PTC Creo in a professional design environment, clearly evidenced on your CV. This is a mandatory requirement and candidates without it won’t be considered, • Strong experience in electrical harness design, including 3D cable modelling (Creo Pro/CABLE or equivalent), • Strong experience in a design office using 3D CAD software, working to BS8888 electrical schematic and harness design standards, • Experience with PLM software, ideally Windchill, • Understanding of configuration control and engineering change management, ideally including Def Stan 05‑57, • Experience in product validation and verification, including environmental requirements, • Confident communicator, comfortable presenting to and representing the business with external stakeholders including the MOD, • Full UK Security Clearance (SC), or eligibility to obtain it through the formal UKSV process Desirable: defence‑sector electrical design experience, particularly involving defence standards or organisations such as BAE Systems or Lockheed Martin; relevant automotive experience involving vehicle electrical systems, cameras or sensors also considered; familiarity with EMC, ECM/EECM, communications and situational awareness systems; experience managing product lifecycle and supply chain interaction. This is a genuine opportunity to take a senior technical role within a business doing work that matters, with real scope to shape design direction rather than just execute it. If that sounds like your next move, we’d love to hear from you. We champion diversity and innovation. Applications are encouraged regardless of race, religion, sex, sexual orientation, background, age, or identity. • Coventry, • Contract or Temp Vehicle Technician — Military Vehicle SystemsLocation: Coventry, CV6Type: Full‑time, PermanentHours: 08:00–16:35 Mon–Thu, 08:00–15:10 FriSalary: £25ph LTDRole overviewOur client, a specialist manufacturer supplying high-priority... Technical Manager – Embedded & PowerWokinghamc.£70,000 DOE ,Permanent ,Company Car, Pension, Life Insurance, Bonus37.5 hrs/weekOur client is a well‑established electronics business supplying franchised and third‑party embedded and power... #J-18808-Ljbffr

We are looking for a talented Electronic Hardware Specialist to join our team specializing in Engineering for our Cummins Drivetrain & Braking Systems advanced Engineering group in Nuneaton, United Kingdom. This role might require up to 25% of domestic and international travel. In this role, you will make an impact in the following ways: Architect next-generation braking and steering electronics: Define scalable ECU, sensor, and actuator hardware architectures that enable safe, reliable, and high-performance control systems for commercial vehicles. Drive innovation in safety-critical hardware design: Lead the development of analog, digital, mixed-signal, and power electronics that support advanced braking and steering technologies. Ensure compliance and product integrity: Embed functional safety, EMC/EMI, environmental, reliability, and cybersecurity requirements into hardware designs from concept through production. Influence key technical decisions: Select microcontrollers, processors, communication interfaces, power devices, and sensors that optimize performance, cost, and long-term scalability. Enable seamless system integration: Partner with software, controls, systems, and mechanical engineering teams to deliver robust hardware-software solutions that meet vehicle-level requirements. Accelerate product development and validation: Lead design reviews, prototype bring-up, debugging, verification, and qualification testing to ensure products are production-ready. Solve complex engineering challenges: Conduct root cause analysis and drive resolution of technical issues during development, validation, and manufacturing phases. Provide technical leadership and mentorship: Guide cross-functional teams and support the growth of junior engineers while establishing engineering best practices across the product lifecycle. To be successful in this role you will need the following: Bring deep expertise in automotive electronics: Leverage extensive experience designing ECUs, sensors, and actuator control systems, with strong knowledge of analog, digital, mixed-signal, and power electronics. Apply advanced hardware architecture and validation knowledge: Utilize expertise in microcontrollers, automotive communication networks, PCB design, EMC/EMI, signal integrity, and hardware verification to deliver robust, production-ready solutions. Champion safety, quality, and compliance: Demonstrate a strong understanding of ISO 26262, hardware safety analysis, automotive development processes, and requirements management to ensure reliable and compliant products. Collaborate and innovate across disciplines: Work effectively with software, controls, systems, mechanical engineering, and suppliers while applying knowledge of commercial vehicle technologies, cybersecurity, and next-generation braking and steering systems. Education/ Experience: College, university, or equivalent bachelor’s degree in engineering or appropriate STEM field is required. Post-graduate (Master's) degree relevant to this discipline area may be required for select roles. This position may require licensing for compliance with export controls or sanctions regulations. Prior Senior or Lead Engineer equivalent work experience in a relevant discipline area is required with a demonstrated track record of technical problem solving and quality decision making. Knowledge of MS Office tools is preferred Job Engineering Organization Cummins Inc. Role Category On-site with Flexibility Job Type Exempt - Experienced ReqID 2438714 Relocation Package No 100% On-Site No #J-18808-Ljbffr

Design electrical systems We're looking for a Senior Electrical Design Engineer to lead the development of advanced electrical systems for next-generation vehicles. You'll play a key role in shaping the electrical architecture that supports mission-critical platforms, integrating technologies such as EMC, ECM/EECM protection, BOWMAN communication, situational awareness systems and complex automotive sub-systems. This role will provide senior technical input and day-to-day design leadership within the electrical design function, working closely with the Design Manager and supporting the development of existing electrical design capability within the team. This is an opportunity to take ownership of technical solutions, influence design direction and work closely with multidisciplinary teams to turn customer requirements into validated, field-ready systems. If you enjoy solving complex engineering challenges and delivering robust electrical designs with a clear real-world purpose, this could be the role for you. You'll lead the electrical design process from concept through to detailed design, creating specifications, presenting design options and guiding solutions through the full design lifecycle. You'll ensure electrical systems meet customer requirements, regulatory standards and operational needs, while balancing technical performance, reliability, manufacturability and through-life support. Working closely with engineers, project managers, production teams, suppliers and customers, you'll translate requirements into validated and verified designs. You'll be a key customer-facing engineer, able to communicate complex technical information clearly and confidently while influencing decisions across multidisciplinary teams. Your work will include prototype development, test definition, engineering change control and support for the legacy fleet. You'll also manage CAD data, BoMs and drawing packs through PLM systems, helping ensure design information is accurate, controlled and ready for manufacture. Creo experience is a mandatory requirement for this role. You must have demonstrable, hands-on experience using PTC Creo in a professional design environment. Candidates must have evidence practical Creo experience on their CV; candidates without Creo experience will not be considered. Our team embraces modern technologies, including AI-assisted tools, to work smarter and deliver better results. Candidates should either have experience using AI tools or demonstrate a willingness to learn and apply them in their role. We're looking for an experienced electrical design engineer who can take ownership of complex design activities, work confidently with customers and stakeholders, and deliver robust engineering solutions in a demanding technical environment. • Experience designing electrical cables, harnesses and associated routing or integration solutions for complex products or vehicle systems., • Demonstrable, hands-on experience using PTC Creo - this is a must-have skill and must be clearly shown on your CV, • Strong experience working in a design office using 3D CAD software, • Experience using PLM software, ideally Windchill 12.0, • Strong understanding of electrical schematics and cable/harness design to BS8888, • Knowledge of configuration control and engineering change management, ideally including Def Stan 05-57, • Experience in product validation and verification, including environmental requirements, • Strong systems engineering understanding, • Experience producing Design FMEAs and applying robust engineering practices, • Excellent communication skills, with the ability to work with internal and external stakeholders, • Proficiency in Microsoft Office, • Full UK Security Clearance (SC), or eligibility to obtain it through the formal UKSV process, • Experience designing specialist vehicle electrical sub-systems, • Familiarity with EMC, ECM/EECM, BOWMAN communication and situational awareness systems, • Experience using the Creo Cabling Module or equivalent cable and harness design tools., • Experience managing product lifecycle and supply chain interaction, • Experience using SolidWorks or Arcadia Excellent package & opportunity. #J-18808-Ljbffr

The DRVN Automotive Group are seeking a Lighting Lead Engineer to join a small, fast-moving engineering team responsible for the development of high-performance and specialist vehicle programmes. The role will provide technical and delivery leadership for complete vehicle lighting systems throughout the product development lifecycle. Acting as the primary engineering interface for headlamps, tail lamps and associated exterior lighting, the role leads requirements capture, concept selection, optical and electronic integration, supplier delivery, validation, homologation, launch and series-production support. The role works across Design, Body, Electrical/Electronic, Software, Vehicle Engineering, Procurement, Manufacturing, Quality and the supply base to deliver compliant, distinctive, robust and cost-effective lighting systems to programme timing, performance, quality and investment targets. • Location: Coventry The DRVN Automotive Group is a sector-leading automotive group, specialising in the design, manufacture, and distribution of luxury automotive brands. Recognised globally for our commitment to innovation, quality, and engineering, we are proudly centred around delivering a world-class customer experience. Our recent launch of Evoluto, along with the reimagination of some of Ford Motor Company ' s most historically significant icons - including the RS200 and MK1 Escort - places DRVN at the forefront of modern automotive excellence. These projects provide our engineers with an exceptional platform to showcase their skills across various disciplines and be part of some of the most exciting modernisation programmes the industry has ever seen. • Own engineering delivery of front and rear lighting systems from concept through design, verification, release, launch and series production, including headlamps, tail lamps, daytime running lamps, direction indicators, stop lamps, position lamps, reversing lamps, rear fog lamps, side markers, reflectors and, where applicable, front fog, cornering and adaptive lighting functions., • Translate vehicle, styling, customer, legal and attribute requirements into controlled system, component and interface specifications covering optical performance, appearance, packaging, electrical load, diagnostics, thermal management, sealing, serviceability, mass, cost and timing., • Lead package and feasibility reviews, resolving interfaces with Class-A surfaces, body structure, bumpers, closures, trim, wiring, controllers, sensors, software and vehicle networks while protecting build variation, aiming and adjustment requirements., • Establish and maintain the lighting delivery plan, engineering bill of materials, requirement status, design maturity, issue log, risk register and gateway evidence; escape threats with clear recovery actions., • Chair technical reviews and lead structured problem-solving, failure investigation, design change and corrective action through to verified closure., • Support sourcing strategy, supplier selection and technical bid evaluation; define RFQ technical content, statements of work, deliverables, acceptance criteria and change-control expectations for lighting systems., • Lead the nominated supplier against agreed APQP and programme milestones, including concept freeze, optical feasibility, design freeze, tooling release, design verification, product validation, production approval and start of production., • Track supplier engineering, tooling, prototype, test, homologation and production-readiness deliverables; challenge assumptions, manage open points and implement recovery plans where timing, cost or quality is at risk., • Manage component targets and status for piece cost, tooling investment, mass, quality, warranty, capacity and timing, providing accurate gateway reporting and engineering input to commercial decisions., • Assess supplier capability in optical design, simulation, electronics, software, moulding, coating, joining, sealing, photometry, end-of-line test, traceability and volume industrialisation., • Create, agree and deliver DVP&R coverage for component and vehicle-level verification, including photometric and colour performance, EMC, electrical robustness, thermal performance, vibration and shock, environmental cycling, ingress protection, corrosion, chemical resistance, UV exposure, condensation and fogging, mechanical strength and life-cycle durability., • Ensure headlamp beam patterns, aiming, levelling, cleaning and adaptive functions, together with all signalling functions, meet defined performance and legal requirements across production tolerances and vehicle variants., • Own the engineering evidence required for applicable market approvals and complete-vehicle lighting installation compliance, working with homologation specialists and suppliers to secure approvals before programme gateways., • Lead DFMEA, boundary diagrams, interface analyses, design reviews, test failure resolution and engineering sign-off; ensure deviations are risk assessed, authorised and closed., • Support quality planning and production approval through control-plan review, dimensional and photometric capability, leak testing, end-of-line functional tests, traceability, appearance standards and issue containment., • Ensure lighting designs are suitable for manufacture, vehicle assembly, adjustment, calibration, service and repair, with robust datum strategies, tolerances, fastening, sealing, connector access and poka-yoke provisions., • Support prototype and pre-production builds, vehicle integration, night-drive evaluations, optical aiming, software calibration, production trials and launch readiness., • Define build, inspection and acceptance requirements and resolve dimensional, appearance, condensation, electrical, diagnostic, photometric and fit-and-finish concerns using data-driven root-cause analysis., • Provide engineering support for launch, warranty and series changes, ensuring lessons learned are captured in specifications, standards and future programmes., • Act as the primary technical and delivery point of contact for vehicle lighting decisions, risks, issues and escalations across programmes., • Coordinate Design, Body, Electrical/Electronic, Software, Vehicle Integration, Attribute, Test, Homologation, Quality, Procurement, Manufacturing, Aftersales and supplier teams to achieve aligned outcomes., • Communicate delivery status, technical recommendations, risks and trade-offs clearly to engineering leadership and programme stakeholders., • Strong knowledge of automotive lighting optics, photometry, light sources, reflectors, projectors, light guides, lenses, bezels, housings, thermal management, coatings, adhesives, vents, sealing and condensation control., • Understanding of LED drivers, power electronics, wiring interfaces, vehicle networks, diagnostics, software-controlled functions, EMC and electrical validation., • Working knowledge of applicable automotive lighting regulations and approval frameworks, including installation, road-illumination, light-signalling and electromagnetic-compatibility requirements for target markets., • Competence in requirements management, DFMEA, DVP&R, tolerance analysis, engineering change control, problem-solving and interpretation of CAD, drawings, specifications and GD&T., • Strong technical judgement, programme delivery, supplier management and communication skills, with a practical, collaborative and detail-focused approach. Please note that this role is not eligible for visa sponsorship. Applicants must have the legal right to work in the UK at the time of application. Right-to-work checks will be carried out in accordance with Home Office requirements. We are committed to creating an inclusive workplace where everyone feels valued and respected. We welcome applications from candidates of all backgrounds and are proud to be an equal opportunities employer. If you require any reasonable adjustments during the recruitment process, please let us know and we will be happy to support you. #J-18808-Ljbffr

We are currently seeking an experienced Mechanical Construction Manager to join a major commercial construction project in Coventry. This is an excellent opportunity for an experienced mechanical professional to take responsibility for the delivery, coordination and installation of mechanical building services on a large-scale commercial project. As Mechanical Construction Manager, you will be responsible for managing the mechanical construction works from installation through to completion, ensuring that the project is delivered safely, on programme, within budget and to the required quality standards. You will work closely with the Project Manager, Site Management Team, subcontractors, engineers and client representatives to ensure the successful delivery of the mechanical services package. • Manage and coordinate all mechanical installation activities on site., • Oversee mechanical subcontractors and specialist contractors., • Ensure works are delivered in accordance with approved drawings, specifications and project requirements., • Coordinate mechanical works with electrical, structural and architectural packages., • Manage site progress, productivity and programme requirements., • Attend site meetings and provide regular progress updates., • Monitor quality of installation and ensure works meet relevant standards and specifications., • Review drawings, RAMS, technical documentation and installation details., • Identify and resolve technical and construction issues on site., • Liaise with design teams, consultants, subcontractors and the client., • Assist with procurement, materials planning and delivery schedules., • Ensure compliance with health, safety and environmental requirements., • Support commissioning, testing and handover of mechanical systems., • Maintain accurate site records and documentation., • Proven experience as a Mechanical Construction Manager, Mechanical Site Manager or similar., • Strong background in commercial building services / construction projects., • Good understanding of mechanical building services installations, including HVAC, heating, ventilation, plumbing and associated systems., • Ability to manage subcontractors and coordinate multiple trades., • Strong understanding of construction programmes, drawings and specifications., • Excellent communication and organisational skills. #J-18808-Ljbffr

We are currently seeking an experienced Mechanical Construction Manager to join a major commercial construction project in Coventry. This is an excellent opportunity for an experienced mechanical professional to take responsibility for the delivery, coordination and installation of mechanical building services on a large-scale commercial project. • Manage and coordinate all mechanical installation activities on site., • Oversee mechanical subcontractors and specialist contractors., • Ensure works are delivered in accordance with approved drawings, specifications and project requirements., • Coordinate mechanical works with electrical, structural and architectural packages., • Manage site progress, productivity and programme requirements., • Attend site meetings and provide regular progress updates., • Monitor quality of installation and ensure works meet relevant standards and specifications., • Review drawings, RAMS, technical documentation and installation details., • Identify and resolve technical and construction issues on site., • Liaise with design teams, consultants, subcontractors and the client., • Assist with procurement, materials planning and delivery schedules., • Ensure compliance with health, safety and environmental requirements., • Support commissioning, testing and handover of mechanical systems., • Maintain accurate site records and documentation. Proven experience as a Mechanical Construction Manager, Mechanical Site Manager or similar. • Strong background in commercial building services / construction projects., • Good understanding of mechanical building services installations, including HVAC, heating, ventilation, plumbing and associated systems., • Ability to manage subcontractors and coordinate multiple trades., • Strong understanding of construction programmes, drawings and specifications., • Excellent communication and organisational skills., • Ability to work effectively with clients, consultants and project teams., • Strong knowledge of UK construction health and safety requirements., • Relevant mechanical/building services qualification or demonstrable equivalent experience., • SMSTS and relevant site qualifications are desirable #J-18808-Ljbffr

• Business Unit: Overheads SOCOTEC’s delivers essential technical services that ensure the safety, quality and compliance of major construction and civil engineering projects across the UK. We provide independent construction materials testing to verify strength, durability and performance of key materials; foundations and pile testing to confirm ground stability; specialist structures and pavements assessment and analysis; and integrated geotechnical and structural monitoring that delivers real time data throughout project lifecycles. Our experts use industry leading methods and advanced technology to support infrastructure projects from initial site investigation through construction and long term performance, helping clients manage risk, meet regulatory standards and build safer, more resilient assets. What's in it for you? Your expertise deserves recognition. Alongside a competitive salary, we offer a comprehensive benefits package including 25 days holiday (with the option to buy more), an electric car scheme (where applicable), employee recognition programmes, family-friendly support, exclusive retail discounts, employee assistance programmes, and an enhanced company pension. SOCOTEC UK & Ireland are proud to be Disability Confident accredited. Senior Quantity Surveyor – Coventry We are seeking a Senior Quantity Surveyor to assist the Operations team in managing and overseeing all commercial matters on projects from tender handover, through delivery to completion. To provide Commercial input and advice to Project Manager (PM)’s and Engineers as necessary while managing the region’s commercial performance. As SOCOTEC grows, so do our teams. We’re looking for a dedicated Senior Quantity Surveyor to join our team and wear the SOCOTEC badge with pride. The tasks you will undertake will include (but are not limited to): • Contracting & Contract finance, • Understanding of NEC Contract – awareness of various options, • Awareness of different construction contracts & their relevant applications, • Support Project Managers/Operations Managers to ensure that the obligations and responsibilities of the different projects and other stakeholders are properly fulfilled, • Assessing cost of variations & attaining agreement with other parties, • Interpreting contractual implications, • Preparation of regular financial progress & anticipated final account reports, • Performing value management & cost control on projects, • Competent Project QS, • Draft/review Compensation Events (Change), • Management of Change Accounts (larger projects), • Oversight of NEC EWN process & awareness of NEC timescales, • Proactive liaison with PMs and Regional Operations Managers to protect cashflow, • Support payment applications and ensure proper and timely certification, • Ensuring correct administration of contract, • Involvement in client meetings to advocate for the business’ commercial interest., • Assist client, internal staff and third parties with commercial queries, • Assisting in feasibility studies for potential work items, • Identifying, analysing & developing responses to commercial risks, • Allocating work to subcontractors & suppliers & controlling risks & costs of same, • Managing Subcontractor works, AFPs, Valuations, CVRs etc, • Debt management utilising contract and legal parameters, • Assisting with disputed / claims (feeding into Advisory division) To be a successful Senior Quantity Surveyor, you should be able to demonstrate: • Quantity Surveying degree or equivalent, • Membership of the RICS, CIOB, or ICES or at least working towards full membership, • Ability to communicate effectively with supervisors and peers, both verbally and in writing., • Ability to be precise and meticulous in ensuring processes are carried out correctly and in a timely manner., • Ability to apply business acumen to solve problems., • Ability to effectively manage time and tasks to achieve high productivity, • Able to produce work in an accurate and timely manner, • Able to work effectively and responsibly without close supervision, • Able to prioritise work efficiently, • Able to produce high quality, accurate documentation Why SOCOTEC? Join a thriving community of over 2,500 industry professionals who are passionate about making a real difference. At SOCOTEC UK, we're not just delivering services - we're shaping the future of testing, inspection, and certification across the nation. What sets us apart? Our people. We've built our reputation on attracting exceptional talent like you and empowering them to deliver excellence at every turn. Our comprehensive range of TIC services means you'll have the opportunity to work on diverse, challenging projects that truly matter. In this role, you won't just be another employee - you'll be a key player in our continued success story. Your expertise will directly contribute to our mission of building a safer, more sustainable world, while you grow your career alongside some of the industry's finest professionals. Build a traditional career path or explore opportunities across multiple disciplines - all within SOCOTEC. Your choice, your direction. Work Your Way Local, national, or global projects. Office-based, remote, or hybrid. We offer the flexibility that empowers you to perform at your best. Committed to Your Growth From day one, you'll have access to comprehensive training, mentorship, and development programs. We support every step of your professional journey. #YouGrowWeGrow Building a safer and more sustainable world is the core mission we set out to achieve at SOCOTEC, it is at the heart of everything that we do. We are committed to acting as a key player in society, investing in innovative solutions to ensure social and environmental concerns are at the forefront of all of our business operations. #J-18808-Ljbffr

At Bodycote, we’re more than the world’s leading provider of heat treatment and specialist thermal processing services. We’re a people business at heart. Our commitment to innovation and sustainability shapes everything we do. With a global footprint and a culture built on collaboration, curiosity, and continuous improvement, we create an environment where you can grow, contribute, and make a meaningful impact. Sustainability is central to our future. We’re on an ambitious journey to reduce our environmental impact through advanced technologies, smarter processes, and ongoing innovation, with our teams around the world playing a key role in making that happen. As Regional Maintenance Engineering Manager, you’ll lead engineering performance across multiple UK sites, ensuring our teams, assets and maintenance activities operate safely, reliably and effectively. You’ll take ownership of multi site engineering leadership, asset reliability, preventative maintenance, engineering standards and team development, delivering measurable improvements across our operations. Working closely with General Managers, senior operational leaders and site engineering teams, you’ll drive a consistent approach to engineering performance, with a particular focus on reducing downtime, improving planned maintenance adherence and eliminating repeat equipment failures. • Proven multi site engineering leadership experience within a manufacturing, industrial or similarly complex operational environment., • A strong technical background in mechanical, electrical or industrial engineering, supported by a relevant qualification or equivalent practical experience., • Strong health & safety knowledge, ideally with IOSH Managing Safely and/or NEBOSH General Certificate., • Experience managing engineering budgets, resources and external contractors., • Strong leadership skills with experience developing, engaging and retaining engineering teams., • Commercial awareness and the ability to use data to identify issues and drive improvement., • A supportive, inclusive culture where your development matters., • Exposure to business wide improvement initiatives., • The opportunity to shape engineering standards and performance across our UK operations., • Competitive salary and benefits package. This is a UK multi site role, requiring regular travel between Bodycote locations. Due to the operational nature of the position, some flexibility will also be required to provide support outside normal working hours in response to significant unplanned equipment failures or quality issues. We are an equal opportunity employer. All qualified applicants will be considered regardless of characteristics protected by local law, including (where applicable) gender, age, disability, sexual orientation, religion or belief, and ethnic origin. We are committed to creating a diverse and inclusive work environment. #J-18808-Ljbffr

Severn Trent Plc is seeking an Abstraction Compliance Specialist to join our Environmental Regulations & Permitting team at the Coventry headquarters.

Ramboll UK is seeking an experienced Environmental Impact Assessment professional to coordinate statutory EIA and related environmental assessments for major development proposals across data centre, industrial and property sectors. You will apply knowledge of UK environmental consenting processes a

We are working on behalf of a client seeking an experienced Environmental Compliance Manager to join our team. Reporting directly to the Managing Director, this pivotal role involves driving environmental improvements across the company, managing a small team, and engaging with various stakeholders

With oversight of regional environmental systems, performance metrics, and reporting processes, the position assists the sites and Group Energy Manager in minimising environmental impact, enhancing operational efficiency, and fostering environmental awareness within the organisation. Enhance environ

Reed Specialist Recruitment is seeking an Environmental Compliance Manager on behalf of a client in the United Kingdom. You will drive environmental improvements, manage a small team, engage with suppliers, customers, NGOs and government bodies, and travel as required.

SHEQ Advisor – Highways Maintenance (Contract).Initial 3 months (likely to extend).We require an experienced SHEQ Advisor to support highways maintenance works on high-speed road networks across Yorkshire.This is a hands-on, site-based role, working directly with operational teams in live traffic

We are looking for a proactive Environmental Specialist who will be part of our environment team co-located across the UK, supporting a regional team comprised of both design and operation staff. As Environmental Specialist, you will:. Identify, plan and coordinate project environmental specialist i

Your work will span the full water cycle, integrating with expertise across urban and natural environments to help clients and communities achieve environmental performance that is both sustainable and efficient. You are familiar with UK environmental quality legislation and understand how your work

Univar Solutions, based in Nuneaton (UK), seeks an EHS Specialist to drive health, safety and environmental standards across the site.

We are working on behalf of a client seeking an experienced Environmental Compliance Manager to join our team. Reporting directly to the Managing Director, this pivotal role involves driving environmental improvements across the company, managing a small team, and engaging with various stakeholders

Support the environmental and sustainability agenda on your site, partnering with specialist teams to bring it to life day to day. NEBOSH Diploma / Certificate level, Environmental Science, Industrial Hygiene, or related field, plus 3+ years’ Environmental, Health & Safety experience – or equiva

Mott MacDonald Bentley are seeking an Environmental Specialist to join the environment team in the UK. You will identify environmental risks across projects from feasibility to completion and support mitigation measures with both design and operation staff. You will coordinate inputs across ecology,

Familiarity with sustainable material databases and environmental product declarations (EPDs). We are looking for an experienced Embodied Carbon Specialist background in architecture or engineering to complement our friendly and dynamic sustainability team.

Significant experience working within Environmental Health or Environmental Protection. Investigate statutory nuisance complaints, environmental pollution incidents, and public health concerns. Deliver air quality monitoring and environmental improvement initiatives.

You will have substantial experience and knowledge of environmental reporting and evidence-based assessment, with the technical knowledge required to act as the specialist lead for SoNaRR and contribute across a broad range of environmental activities. Commission, lead, and manage complex work relat

Become a food delivery driver with Deliveroo and find work that suits you.Make money on your own schedule with your own vehicle (scooter, bike or car).Work when you want to, at the tap of a button.Scooter, bike or car (with license and insurance).Smartphone with iOS 12 / Android 6 or above.Proof of

Senior Care Assistant – Glenrothes, Fife (KY7).Deliver exceptional care as a Senior Care Assistant with Newcross Healthcare.Are you a compassionate Senior Care Assistant looking for flexibility, great pay, and career development? At Newcross Healthcare, we value and support our health and social c

Fixed Term until 31 December 2027.Work within the Councils estate of buildings undertaking cleaning duties as directed by line manager in accordance with the practices and procedures of the service.We are keen to employ a diverse workforce that reflects the people of Scotland.We welcome applications

The salary advertised is full time (35 hours per week, 52 weeks per year).Part-time hours / sessional posts will be pro-rated accordingly.This is a 40-week sessional post i.Monday - Thursday, 15:00-18:00.To assist in the provision of a high quality cleaning service within Council buildings.Please do

Work within the Councils estate of buildings undertaking cleaning duties as directed by line manager in accordance with the practices and procedures of the service.We are keen to employ a diverse workforce that reflects the people of Scotland.We welcome applications from all backgrounds and particul

To support the care, welfare and education of children and young people with additional support needs (ASN) in accordance with relevant legislation, policy and guidelines.A Learning Support Worker may be asked to work with any child or group of children either within a department, within a mainstrea

This is a casual, part-time role offering flexible working.As a Bank Activities Assistant at a Barchester care home, you'll help to create a stimulating environment that enables us to deliver exceptional all-round care and support for our residents.Our ethos is all about celebrating life, so you'll

Residential Support Worker – Children’s Services - Glenrothes, Fife (KY7).Be the reason a child feels safe, supported, and heard.At Newcross Healthcare, we’re on a mission to help children and young people thrive.We’re looking for compassionate.If you’ve got experience working with childre

Early Learning Support Worker .Renfrewshire Council is looking to recruit an enthusiastic and skilled Early Learning.You will be part of a team assisting nursery officers in the delivery of early learning and childcare including supporting lunchtimes, working with individual/groups of children and

Join the UK's Favourite Parcel Delivery Company!.Christmas Incentive 2026 - Earn an EXTRA 50p for every stop***.To qualify and be paid before Christmas Eve, simply:.Deliver parcels on our busiest days.At DPD, we provide the tech, start up support, and steady volume you need to build a high-earning r

Join our award-winning school cleaning team.We’re proud of our award-winning service, recognised with:.ASSIST-FM Contribution to Cleaning Award - 2022.APSE Building Cleaning Innovation Award - 2023.Building Cleaning Most Improved Performance Networks Award – 2024.ASSIST – FM Contribution to Cl

The National Autistic Society is committed to safeguarding and promoting the welfare of all children and adults who use our services.Successful applicants will be required to complete the relevant safeguarding checks.Join Us as a Bank Support Worker.The National Autistic Society helps create a world

Homefire Group, a part of Invica Industries, is the UK's leading smokeless fuel and kiln dried firewood manufacturer and supplier, putting sustainable warmth and comfort at the heart of your home.We've been keeping homes warm and cosy for nearly 300 years.We operate from over 40 locations in England

Childrens Residential Support Worker Temp to Perm 39 hours per week | £12.Immediate starts available We are currently recruiting for a Childrens Residential Support Worker to join a residential home supporting children aged 513 years with emotional and behavioural difficulties (EBD).This is a

We are seeking a highly professional and experienced Retail Security & Loss Prevention Officer to join our team in Coventry.This role is ideally suited to individuals who have a proven background in retail security, loss prevention, and shrinkage reduction within busy retail environments.We are

Amazon Flex Delivery Driver - Earn £14 to £18* per hour.Deliver packages on your schedule and get paid weekly.Flexible hours and get access to a wide range of deals & discounts.Deliver with us this winter as a seasonal delivery partner.To continue delivering smiles to all our customers, we're open

Where you will be working: Location: Ormesby House, West Hill, Oxted, Surrey, RH8 9JB Ormesby House provides a specialist residential service for all gender identities who have a learning disability, or who are autistic, and have behaviours which, due to their diagnosis may be of concern/distress. A

As a specialist provider of education and care for children and young people with special educational needs, we understand the importance of embracing individuality and championing difference- especially when it comes to neurodiversity.

Weekend Support Worker - Corner House, Lincoln, LN2 5AL , Permanent, 24HRS, Grade 2 AS, £25,398 FTE Are you looking for a new challenge? Are you an enthusiastic, compassionate and dynamic individual? Do you want a role where you are seen, heard and valued? If so, we need you to help us support