Trabajos hardware engineer en Reino Unido

Principal Electrical Design Engineer - Protection & Control Scotland Region Permanent – Full Time, hybrid Salary Competitive + Car Allowance + Flexible Benefits Summary: This role involves designing and overseeing the implementation of protection schemes, control systems, and related equipment to ensure the safe and reliable operation of power networks, substations, and Transmissions and Distribution electrical infrastructure. Position requires technical expertise and vast experience working in Transmission and Distribution sector for protection & control and Substation Automation system/SCADA design (from 11kV up to 400kV). Candidate should lead the design and specification of protection and control systems for electrical substations, powerplants, and transmission/distribution networks. Roles & Responsibilities: • Candidate is responsible to develop protection settings, relay PSL files, coordination studies, including fault detection and isolation strategies., • Candidates should have complete knowledge of all TSO/DNO standards & specifications with respect to P&C Design & Calculations, as well as overall Substation Design Works. He/She should ensure compliance with relevant national and international standards (e.g., IEC, BS, IEEE) in protection system design., • Candidate should have good knowledge of substation primary design and substation equipment/switchgear specifications. He/She should ensure that the design meets safety standards and regulatory requirements, incorporating protection against electrical hazards, arc flash, and other safety concerns., • Design, implement and maintain SCADA/communication systems for a variety of clients in sectors including utilities, oil and gas, manufacturing, industrial automation and various other communication networks., • Configure and optimize network infrastructure & communication protocols such as IEC 61850; Distributed Network Protocol (DNP 3); Parallel Redundancy Protocol (PRP); Precision Time Protocol (PTP); Network Time Protocol (NTP); Simplified Network Time Protocol (NTP), Modbus, OPC, Profibus, etc for seamless integration with field devices, including RTUs, PLCs, IEDs, etc, also ensure stable connectivity between SCADA centres & remote sites, and configure secure VPNs & remote access protocols to allow for safe, off-site monitoring and control., • Understand client requirements & produce network architecture philosophy diagram, IED telecommunication diagram, SCADA & Telecommunications Panel design, Network IP allocation, I/O Schedules, Cable & Core schedules, etc., • Assist with the setup and commissioning of SCADA systems at client sites, troubleshoot field devices and network communication issues, perform preventive and corrective maintenance on SCADA infrastructure and associated hardware., • Efficiently design/develop the SCADA/communication systems (e.g., Ignition, Siemens WinCC, GE iFIX, etc) to ensure real-time data acquisition and control for critical infrastructure., • Provide remote support for troubleshooting SCADA system and network issues, ensuring minimal downtime and swift resolution of critical incidents., • Conduct system upgrades, testing, and validation for new features, components, and patches., • Implement cybersecurity measures to safeguard SCADA systems against emerging threats., • Collaborate with cross-functional teams to ensure smooth integration and deployment of SCADA systems., • Candidate should have experience in tendering, pricing jobs, proposal creation. Candidate should be actively participating in work winning process., • Candidate should be capable of technically assessing engineering problems and critically evaluating a range of technical solutions., • Unwavering confidence in technically assessing engineering problems and critically evaluating a range of technical solutions will be instrumental in pursuit of engineering excellence., • Exemplary communication skills to demonstrate diligence, prioritize tasks effectively, and ensure a thorough understanding of relevant legislation, including CDM and ESQCR. This knowledge will be pivotal in managing Transmission and Distribution network., • Collaborate closely with other designers, construction professionals, and engineering teams., • Liaise effectively with the Power Systems, Primary and Civil design departments to ensure that all objectives are met and that the best possible design is submitted., • Review and provide constructive feedback on the reports and drawings done by Junior & Senior Engineers., • Experience: Extensive experience in electrical protection and control system design, Substation Automation and SCADA system typically 12-15 years, with a proven track record of delivering complex projects within the power sector., • Technical and Professional knowledge and experience associated with the role., • Candidate should have vast experience in crafting Single Line Diagrams, AC & DC Schematic Drawings, Panel General Arrangements, Panel Wiring Diagrams, Switchgear Termination/interconnection drawings, Block Cable Diagrams/Schedules, and performing cable specification/sizing calculations, battery sizing calculations, CT/VT sizing, multicore sizing, Relays CORTEC/specifications., • Candidate should have experience in testing & commissioning of P&C, SCADA/Communication/SAS panels. Should be able to Identify potential risks and failures within protection and SCADA systems and propose mitigation strategies., • Education: Bachelor’s degree in electrical engineering (typically 2:1 or above) in Electrical Engineering, Power Systems, or a related field. A master’s degree may be preferred for senior roles., • Chartered Status (Preferred): Chartered Engineer (CEng) status with a professional body such as the Institution of Engineering and Technology (IET) or the Institution of Electrical Engineers (IEE) is highly desirable., • Certifications (Optional): Professional certifications such as NEBOSH for health and safety, or specific training in protection and control system design, may be beneficial.Candidate should have experience working in Substation Automation Syste

Principle Engineer – Protection & Control (P&C)London, Leeds, South - HybridPermanent – Full TimeSalary Competitive (DOE) & Flexible Benefits Role Purpose:This role involves designing and overseeing the implementation of protection schemes, control systems, and related equipment to ensure the safe and reliable operation of power networks, substations, and Transmissions and Distribution electrical infrastructure. This position requires technical expertise and vast experience working in Transmission and Distribution sector for protection & control and Substation Automation system/SCADA design (from 11kV up to 400kV). As Principal you will lead the design and specification of protection and control systems for electrical substations, powerplants, and transmission/distribution networks. Key Deliverables: As a Principal Engineer (Protection & Control) you will be required to do following: • Develop protection settings, relay PSL files, coordination studies, including fault detection and isolation strategies., • Lead on TSO/DNO standards & specifications with respect to P&C Design & Calculations, as well as overall Substation Design Works. He/She should ensure compliance with relevant national and international standards (e.g., IEC, BS, IEEE) in protection system design., • Design, implement and maintain SCADA/communication systems for a variety of clients in sectors including utilities, oil and gas, manufacturing, industrial automation and various other communication networks.?, • Configure and optimize network infrastructure & communication protocols such as IEC 61850; Distributed Network Protocol (DNP 3); Parallel Redundancy Protocol (PRP); Precision Time Protocol (PTP); Network Time Protocol (NTP); Simplified Network Time Protocol (NTP), Modbus, OPC, Profibus, etc for seamless integration with field devices, including RTUs, PLCs, IEDs, etc, also ensure stable connectivity between SCADA centres & remote sites, and configure secure VPNs & remote access protocols to allow for safe, off-site monitoring and control.?, • Understand client requirements & produce network architecture philosophy diagram, IED telecommunication diagram, SCADA & Telecommunications Panel design, Network IP allocation, I/O Schedules, Cable & Core schedules, etc.?, • Assist with the setup and commissioning of SCADA systems at client sites, troubleshoot field devices and network communication issues, perform preventive and corrective maintenance on SCADA infrastructure and associated hardware.?, • Efficiently design/develop the SCADA/communication systems (e.g., Ignition, Siemens WinCC, GE iFIX, etc) to ensure real-time data acquisition and control for critical infrastructure.?, • Provide remote support for troubleshooting SCADA system and network issues, ensuring minimal downtime and swift resolution of critical incidents.?, • Conduct system upgrades, testing, and validation for new features, components, and patches.?, • Implement cybersecurity measures to safeguard SCADA systems against emerging threats.?, • Collaborate with cross-functional teams to ensure smooth integration and deployment of SCADA systems.?, • Extensive experience in electrical protection and control system design, Substation Automation and SCADA system typically 12-15 years, with a proven track record of delivering complex projects within the power sector., • Candidate should have vast experience in crafting Single Line Diagrams, AC & DC Schematic Drawings, Panel General Arrangements, Panel Wiring Diagrams, Switchgear Termination/interconnection drawings, Block Cable Diagrams/Schedules, and performing cable specification/sizing calculations, battery sizing calculations, CT/VT sizing, multicore sizing, Relays CORTEC/specifications., • Candidate should have experience in testing & commissioning of P&C, SCADA/Communication/SAS panels. Should be able to Identify potential risks and failures within protection and SCADA systems and propose mitigation strategies., • Candidate should have good knowledge & experience working with AutoCAD., • Candidate should have good knowledge of substation primary design and substation equipment/switchgear specifications. He/She should ensure that the design meets safety standards and regulatory requirements, incorporating protection against electrical hazards, arc flash, and other safety concerns., • Candidate should have experience working in Substation Automation System (SAS)/SCADA/communication system design., • Certifications (Optional): Professional certifications such as NEBOSH for health and safety, or specific training in protection and control system design, may be beneficial., • Education: Bachelor’s degree in electrical engineering (typically 2:1 or above) in Electrical Engineering, Power Systems, or a related field. A master’s degree may be preferred for senior roles. At Freedom, we believe in attracting and retaining the best talent by offering great benefits and career progression opportunities, including: • Pension with up to 8% employer contribution, • Car Allowance, • Private Medical Insurance, • Personal Wellbeing and Volunteer Days, • Salary Sacrifice Car Scheme (Hybrid/Electric Vehicle), • Flexible benefits (e.g., Dental Insurance, Gym Memberships, Tax-Free Bikes)

Senior Compiler Engineer Location: London (Remote Working available) We’re partnering with a well-funded, fast-growing semiconductor and AI computing company building high-performance compute platforms at the intersection of advanced silicon, accelerators, and compiler technology. They are expanding their compiler organisation and are looking for Senior to Staff-level Compiler Engineers to work on performance-critical, hardware-aware compiler systems that directly impact next-generation compute products. Senior Compiler Engineer Responsibilities • Development and evolution of LLVM-based and custom compiler toolchains, • Performance optimisation for AI / ML and accelerator-driven workloads, • Low-level code generation, backend, and systems-level compiler work, • Close collaboration with architecture, silicon, and hardware teams to influence real products Senior Compiler Engineer Background • Strong experience in compiler development (LLVM strongly preferred), • Excellent C++ skills, • Background in systems programming, performance optimisation, or hardware-aware software, • Exposure to AI accelerators, CPUs, GPUs, or DSPs is a strong plus Interested in learning more? Message Harry Hansford at IC Resources for a confidential discussion.

Mobile Software Engineer - IOS & Android Salary : £50,000 - £75,000 We’re looking for a Mobile Software Engineer to build and maintain mobile applications used for robot control and data collection. These applications are the primary interface through which users interact with robotic systems, so performance, reliability, and user experience are critical. This role focuses on creating intuitive mobile experiences that make complex robot behaviour easy to understand, while supporting real time communication and data visualisation in real world environments. Responsibilities • Develop and maintain mobile applications for iOS and Android platforms, • Design clear, intuitive user interfaces for robot control and monitoring, • Implement real time data visualisation and live communication features, • Optimise application performance across devices and varying network conditions, • Ensure a high standard of usability, stability, and responsiveness, • Collaborate with engineers to integrate mobile applications with robotic systems Requirements • Experience with React Native and native iOS or Android development, • Strong understanding of mobile UI and UX principles, • Experience working with real time data streaming, • Proficiency in TypeScript or JavaScript Nice to have • Experience with WebRTC or similar real time communication protocols, • Background in robotics, IoT, or hardware integrated applications, • Experience with Bluetooth or WiFi based device communication What’s on offer • Competitive salary and equity, • Opportunity to work on user facing applications that directly control physical systems, • Meaningful technical challenges across mobile, real time data, and robotics

Do you want to work on some of the most advanced technology in the world? Our client operates one of the most powerful private HPC clusters globally, with 10s of thousands of GPUs (including 1000s of A100s), 100s of petabytes of storage, and almost 10 petabytes of RAM. This cutting-edge infrastructure supports state-of-the-art Deep Learning models that process trillions of data points, driving trading algorithms that handle $300 billion across 80+ exchanges daily. They are one of the youngest, yet most innovative and successful algo trading firms on the planet. All with under 200 people. Their mission? To harness this world-class technology and the expertise of exceptional people like you to make financial markets more efficient and fairer for everyone. Technology is their heartbeat, but they don’t rely on off-the-shelf solutions—they build their own to ensure unparalleled scale, reliability, and resilience. This is where you come in… They are looking for an exceptional C++ Engineer to join their most critical engineering group across the whole firm. This elite team of engineers is responsible for developing all of their on-exchange proprietary trading technology—the single biggest driver of the firm’s revenue. As part of this team, you’ll be among the highest-paid engineers in the company, working on super low-level, close-to-the-metal projects that turn cutting-edge research ideas into reality. What can they offer you? • Build the unimaginable: Explore and work on a wide scope of projects that push the boundaries of technology. From creating an exabyte-scale distributed filesystem to custom compilers for massively parallel computation, your work will be challenging and complex. At every turn, it will contribute to the core trading stack and have a direct impact on the success of the firm., • Work with the Best: Collaborate with some of the most talented engineers, researchers, and quants in the world. You’ll be surrounded by colleagues who are at the top of their fields, pushing the boundaries of technology and finance every day., • Innovation & Impact: Work in a modern, young codebase with minimal legacy code and technical debt. You’ll have the freedom to choose the best technology for the job, allowing you to innovate and deliver at an unmatched scale. They also have a pretty epic office, amazing perks, a great culture and pay very well! What are they looking for? You’re the kind of engineer who knows what’s going on under the hood and thrives on working at the lowest levels of software engineering—borderline hardware. Your expertise includes some blend of modern C/C++ with the following: • Operating systems (Linux Kernels), • CPU architecture, • GPU programming, • Assembly Language, • Hardware knowledge (ASICs/FPGAs) Hit apply or drop me a note to find out more 😊

Quantitative Developer – HFT (C++) | Ultra-Low-Latency Trading | High-Performance Systems We are looking for an experienced C++ engineer to join a high-performance trading team focused on building ultra-low-latency systems that operate at global scale. This is a unique opportunity to work on cutting-edge technology where every nanosecond counts. ⭐ The Role As part of the HFT team, you will: • Design, develop, and optimize latency-critical C++ systems for trading, market data, and infrastructure., • Work on end-to-end ultra-low-latency architectures, including kernel-level tuning, network optimization, and highly efficient system components., • Collaborate with FPGA engineers and hardware teams to integrate hardware and software pathways., • Profile and fine-tune performance across CPU, cache, and memory layers, ensuring maximum efficiency., • Contribute to the evolution of a high-throughput, front-office tech stack. 🎯 What We’re Looking For • 5+ years of experience in performance-critical C++ (C++17 or newer)., • Strong expertise in systems programming, memory management, and CPU architectures., • Deep knowledge of Linux internals, kernel parameters, and low-level profiling., • Passion for high-performance computing, networking, and hardware-software optimization., • Experience in systematic trading, HFT, or quantitative environments is a plus., • Proven ability to architect, optimize, and scale ultra-low-latency systems. 🌍 Why This Opportunity Is Exceptional • Work in a front-office, revenue-driving engineering environment., • Build and optimize state-of-the-art HFT systems across software, FPGA, and infrastructure., • Join a culture that values innovation, autonomy, and technical excellence., • Direct impact on strategy performance and technology evolution., • Opportunities to work in global offices. If you’re a C++ engineer excited by ultra-low-latency systems, HFT, and high-performance software design, this is a rare opportunity to make a tangible impact on a top-tier trading desk.

We are seeking an exceptional C++ Engineer to join one of the world's most advanced high-frequency trading firms. This is a rare opportunity to work at the intersection of cutting-edge technology and global financial markets, where performance is measured in nanoseconds and innovation drives competitive advantage. You'll be part of a team that designs and builds ultra-low latency trading systems deployed across global exchanges. Your work will directly impact trading performance, and you'll be empowered to push the boundaries of what's possible in software and hardware optimisation. Key Responsibilities • Architect and implement high-performance C++ systems with extreme latency sensitivity., • Optimise every layer of the stack - from CPU cache and memory allocation to kernel bypass and network I/O., • Collaborate with traders, quants, and infrastructure engineers to deliver robust, scalable, and lightning-fast trading solutions., • Profile, benchmark, and tune systems using advanced tooling and custom diagnostics., • Contribute to the design of proprietary protocols, lock-free data structures, and real-time analytics pipelines. Ideal Candidate • Expert-level proficiency in modern C++, with a deep understanding of low-level systems programming., • Strong grasp of computer architecture, concurrency, and performance engineering., • Experience with kernel bypass technologies (e.g., DPDK, Solarflare/OpenOnload) and high-performance networking., • Familiarity with Linux internals, NUMA, CPU affinity, and custom memory management., • Proven track record of building latency-critical systems in trading, gaming, or telecom environments., • Bonus: Experience with FPGA acceleration, RDMA, or custom NIC firmware. Why Apply? • Work with some of the fastest systems and smartest minds in the industry., • Direct impact on trading performance and strategy execution., • Access to bespoke infrastructure, bleeding-edge hardware, and proprietary tooling., • Culture of excellence: flat structure, minimal bureaucracy, and relentless focus on performance., • Compensation at the top end of the market, with significant upside tied to impact. Apply Now!

About the Company Building out a new team in London, rapidly scaling Silicon Valley technology company building core infrastructure for physical AI across sectors including automotive, defence, construction, mining, agriculture, and logistics. Its platforms are used by leading global manufacturers and government organisations to enable intelligent, autonomous systems. The business has a global footprint with offices across North America, Europe, and Asia. The company operates primarily in-office and expects most employees to be onsite five days per week, with pragmatic flexibility for personal commitments when needed. About the Role As a Forward Deployed Engineer, you will work in small, high-impact teams delivering end-to-end technical execution on mission-critical projects. You will act as the bridge between advanced intelligence platforms and real-world operational environments. You’ll deploy and integrate autonomy software, operating systems, and tooling into complex customer platforms, often in demanding environments. The role spans software engineering, system deployment, hardware integration, and solution architecture. Responsibilities • Deploy and operationalise advanced autonomy platforms in defence and government environments, from contractor sites to forward operating locations, • Solve diverse technical challenges across software, OS configuration, deployment, and hardware integration, • Integrate customer systems with proprietary platforms to deliver measurable operational value, • Build scalable delivery approaches for customer engagements, • Design architectures that improve repeatability and reliability across programmes, • Collaborate closely with engineering, product, and customer stakeholders, • Own technical delivery end-to-end, adapting to evolving requirements Qualifications • Strong engineering background (Computer Science, Computer Engineering, Aerospace, or similar), • Proficiency in C++ and Python, • Broad technical depth across software, operating systems, and hardware-adjacent environments, • Experience integrating and deploying complex systems, • Strong independent problem-solving ability in ambiguous environments, • Excellent communication and customer-facing capability, • Track record of driving successful technical engagements, • Professional references describing you as low-ego, motivated, thoughtful, and collaborative Required Skills • Willingness to travel between offices and customer locations as required. Preferred Skills • Experience with government or defence customers, • Systems architecture and scalable solution design experience, • Background in defence, robotics, automotive, autonomy, or adjacent sectors

Principle Engineer This is a role for engineers who like big systems, hard problems, and meaningful ownership. You’ll be joining a team operating at the intersection of software, hardware, and AI. The engineering team is small, ambitious, and deeply technical, building the orchestration systems that keep thousands of GPUs running at peak performance across global data centres. About You You’re a pragmatic systems builder who thrives in complexity, enjoys autonomy, and understands what it means to own production at scale. You’ll likely bring: • 5+ years’ experience building distributed systems in Go within cloud-native environments., • Deep hands-on experience with Kubernetes and container orchestration., • A strong grasp of Infrastructure-as-Code (Terraform) and configuration management tools (Ansible, Puppet, or similar)., • Strong observability experience using tools like Prometheus / Mimir, Loki, Tempo, Grafana, Alertmanager., • Experience deploying and operating large-scale GPU clusters or HPC systems (Ideally)., • Working knowledge of ML infrastructure and familiarity with GPU drivers, CUDA, and container runtimes., • A low-ego, collaborative approach and a clear, proactive communication style.

My client, a tier-one multi-strategy hedge fund, is seeking a Platform Engineer to join their infrastructure engineering group in London. Operating in a Kubernetes-heavy, automation-first environment, you’ll help expand and modernize the firm’s global technology platform, delivering a best-in-class foundation to power all trading, research, and enterprise workloads. Embedded within a high-performance engineering organisation, you’ll work across container orchestration, Linux systems, infrastructure automation, and platform reliability - partnering closely with core engineering, security, and operations teams. In the first 3–6 months, you’ll take ownership of provisioning and configuring physical and virtual servers, managing hypervisor-based infrastructure, and building automation frameworks to scale systems administration across the estate. You’ll also be comfortable troubleshooting complex systems across application, OS, and physical/virtual hardware layers in a demanding production environment. To secure the most relevant hire, my client is prepared to offer highly competitive compensation, market-leading bonuses, excellent benefits, and clear long-term growth opportunities. Apply now via the link below or send your resume directly to .

This role is with one of Dex’s trusted Partner companies. We work closely with their teams to truly understand their culture, goals, and what they’re looking for, so we can match you with the right opportunity for your goals! If you’re interested, apply here, or head over to Dex to find other opportunities with top tech companies, where you can truly find work that matters! Founding Engineer for a Defense-Tech Logistics Disruptor. We’ve partnered with a high-growth, pre-seed startup that is currently tackling one of the most critical challenges in global security: the "bloodstream" of defense logistics. While modern warfare has evolved, the supply chains supporting it are often stuck in the past, relying on manual processes and fragmented data. This team, composed of Amazon veterans and military domain experts—is building a lightweight, intelligent "middle layer" for armed forces. They’ve already achieved a 90% reduction in computation time for complex logistical needs, ensuring critical supplies reach their destination regardless of environmental constraints. As a Founding Engineer, you won't be just a "coder", you are a core architect of a machine designed for high-stakes, "battle-proven" efficiency. What you'll do • Architect the Core: Build and scale backend systems capable of processing vast data transformations and network optimizations., • Design for Constraints: Develop software that runs anywhere, from modern cloud environments to rugged on-premise hardware., • Full-Stack Ownership: Take total agency over the stack, connecting new services and remodeling infrastructure to create a seamless experience., • Mission-Critical Problem Solving: Use Java, Kotlin, and Python as tools to solve ambiguous, high-stakes requirements where reliability is a matter of global security. What you'll bring • High Ownership: You thrive with "strong convictions, loosely held" and have a relentless drive to see a problem through to its fix., • Technical Breadth: You are a T-shaped engineer who can help select the right stack for the solution at hand rather than being wedded to a specific syntax., • A "Battle-Proven" Mindset: You value efficiency and reliability over "state-of-the-art" fluff., • Bonus Points: Prior experience in defense-related environments or military service is a significant plus. What's in it for you? • Real Impact: You will have massive "push and pull" influence on the architecture of a company backed by a Tier 1 investor., • Hybrid Flexibility: Work with a small, elite team spread across Europe, featuring an office in Berlin and a growing presence in London., • European Sprints: Every month, the team meets in a different European city to collaborate, align, and hang out., • Founding Perks: Competitive salary, meaningful equity, top-tier hardware, and a culture that tracks impact rather than hours. To be considered for this role, apply directly, or sign up to Dex to find other opportunities! You're used to solving the toughest problems - Your job search shouldn't be one of them!

Product Design Engineer (On-site, London) – Sunday Lighting Sunday Lighting is building lighting that recreates the feel and physiological effects of real daylight. We’re makers first: build, test, refine: then ship beautifully engineered products We’re hiring a Product Design Engineer with 3+ years’ experience to take ideas from sketch to shipped hardware. You’ll own CAD in SolidWorks, drive DFM, and manage BOMs. You’ll also work directly with suppliers and factories to turn designs into reliable, manufacturable products. What you’ll do • Create new products and evolve existing ones with clear attention to form, functionality and manufacturing., • Build clean, well-structured SolidWorks CAD; prepare drawings and release packs; own the BOM., • Lead DFM: simplify assemblies, improve tolerances and fit, reduce parts and cost while protecting quality., • Source components and suppliers; run RFQs; compare samples; track cost, lead time and quality., • Work closely with suppliers and factories worldwide to ensure delivery (including occasional travel), • Prototype in our workshop, test, iterate, and feed improvements back into design. What you’ll bring: • 3+ years shipping physical products as a Product/Mechanical/Industrial Design Engineer., • SolidWorks proficiency (parts, assemblies, drawings)., • Proven DFM experience and BOM ownership from prototype through to production., • Confidence working with suppliers/factories; comfortable balancing cost, quality and timelines., • A maker’s mindset: pace, ownership and pride in well-made things. Nice-to-have (not required) • Comfortable on the tools (3D printing, basic jigs/fixtures, hand-assembly)., • Clear written documentation for suppliers and internal builds. The setup • Full-time, on-site in our workshop (Park Royal, London) ., • Competitive salary + stock options., • Travel to suppliers/factories as needed (UK/EU/Asia). We value people who take ownership, sweat the details and love a fast paced environment. If that’s you, we’d love to hear from you.

Leading Backend Developer – AI Security Startup About the Company We are partnered with a fast‑growing, venture‑backed AI startup building next‑generation video intelligence technology. Our platform helps organisations extract real value from their video data, faster, smarter, and with far less manual effort. They've secured over $30M in VC funding, are already generating revenue, and have a strong runway as we scale. The founding team consists of experienced technologists and entrepreneurs with deep backgrounds in advanced robotics, AI, and large‑scale systems. The Role: Leading Backend Engineer We’re looking for a highly capable Leading Backend Engineer to become a key contributor within our core engineering team. You’ll be responsible for architecting, building, and scaling the systems that sit at the heart of our AI‑driven video intelligence platform. In this role, you will: • Build and maintain backend services that ingest, process, and serve large volumes of video and sensor data, • Design scalable APIs and distributed systems that power our frontend and ML pipelines, • Collaborate on shaping infrastructure, architecture, and technical strategy from the ground up, • Solve complex problems involving real‑time processing, distributed systems, and high availability, • Fully own backend and edge functionality with emphasis on architecture, delivery, and cross‑team collaboration You’ll be a great fit if you have: • Strong experience with Golang, Python, or C++, • A strong track record of building scalable backend systems and APIs, • A Computer Science degree or similar (or equivalent experience), • Proven experience working in startups or fast‑moving environments, • Comfort with distributed systems, containers, and cloud‑native infrastructure, • A deep understanding of system performance, reliability, and clean architecture principles What We Offer • Competitive salary with regular performance reviews, • Equity in a rapidly scaling AI company, • High ownership and autonomy over product‑critical components, • Frequent team socials, dinners, and offsites, • The latest tools, tech, and hardware, • A sharp, mission‑driven team solving impactful real‑world problems, • The chance to shape a product at the intersection of AI, security, and real‑time decision‑making If interested, please apply now!

We are looking for an experienced Service Operations Engineer. Responsibilities: • Responsible for planning the server or rack, arranging the server mounting or rack installation, and following up the installation of the server operating system, • Responsible for the daily maintenance, troubleshooting, repair and follow-up break-fix of the server and other hardware, • Maintain data on internal systems including Asset Management, Ticketing, & rack elevations, • Work with remote vendors or junior SOE to solve hardware batch failures and problems, • Oncall on duty, responsible for dealing with the problems raised by the business owner side, • Collect and check online asset data, • Submit and track the part RMA or media destruction process, • Server network troubleshooting, • Server lifecycle management, • Other server operation related work Requirements: • Bachelor’s Degree in Computer science, Electrical engineering or any other relevant fields, • Strong ability to work under pressure; Strong learning ability, broad technical interest; Strong sense of responsibility, full of enthusiasm for work, • Good communication skills in English, Mandarin is preferred, good team work spirit; Ability to work independently, • Knowledge of the interdependencies of data center functions and technologies, • Experience with massive remote OS installation such as PXE boot, • Can understand and run Shell or Python scripts, • Familiar with simple automation tools, such as Ansible, • Familiar with Linux system, able to locate hardware faults; Strong analytical and problem solving skills, • Basic TCP/IP knowledge concepts – Subnetting, VLANs, DNS, Ipv6; Ability to perform general troubleshooting, • Knowledge of out-of-band/lights-out server communication methods, such as IPMI and NCSI, • Strong documentation skills and habits What we offer • Onsite - London, • Full Time Employment; Permanent Contract, • Attractive Remuneration Package, • Career Growth Opportunities, • Skills Enhancement through Udemy Business, • Work in a well-established Multinational Company, • Supportive international team About Centific Centific expertly engineers platforms and curates multimodal, multilingual data to empower the ‘Magnificent Seven’ and enterprise clients with safe, scalable Artificial Intelligence(AI) deployment. Our team includes over 150 PhDs and data scientists, along with more than 4,000 AI practitioners and engineers. We leverage an integrated ecosystem comprised of industry-leading partnerships, and 1.8 million vertical domain experts across 230 locales, to create high-quality pre-trained datasets, fine-tuned industry-specific Large Language Models(LLMs), and Retrieval-Augmented Generation (RAG) pipelines supported by vector databases. Our innovations can reduce Generative Artificial Intelligence(Gen AI) costs by up to 80% and bring Gen AI solutions to market 50% faster. Our mission is to bridge the gap between AI creators and industry leaders by bringing best practices in Generative AI to unicorn innovators and enterprise customers. We aim to help these organizations unlock significant business value by leveraging Generative AI at scale, ensuring they stay at the forefront of technological advancement and maintain a competitive edge in their respective markets. Applying to this job implies your agreement with: In compliance with the applicable data protection regulations (General Data Protection Regulation 679/2016), we at Centific, as data Controllers, inform you that the data collected will be processed to manage your application in the selection process. This processing is legitimized by the consent given upon submitting your application, and the data will be retained for a maximum of two years. You may exercise your rights of access, rectification, deletion, opposition, restriction of processing, and data portability by contacting Furthermore, if deemed necessary, you may file a complaint with the relevant supervisory authority. Your Authentic Self at Centific Centific is committed to creating a diverse environment and is proud to be an equal-opportunity employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, gender, gender identity or expression, sexual orientation, national origin, genetics, pregnancy, disability, age, veteran status, or other characteristics. Centific is also committed to compliance with all fair employment practices regarding citizenship and immigration status.

Senior Software Engineer - AI Infrastructure We’re working with a hyper growth company. They are building the GPU infrastructure to the best ai labs and the biggest enterprise companies. They are building the solution that allows researches to focus on their models, while utilising the phenomenal scale and reliability of the world best ai cloud platform. The engineering team is small, ambitious, and deeply technical, building the orchestration systems that keep thousands of GPUs running at peak performance across global data centres. This role sits at the heart of it, designing and scaling the systems that make AI at exascale possible. What You’ll Focus On You’ll help shape the orchestration layer for one of the most advanced AI compute environments in the world. Your work will involve: • Designing core platform services for cluster provisioning, workload orchestration, and resource management APIs., • Building integrations with schedulers (Kubernetes, Slurm) and container runtimes for reliable, high-performance GPU workloads., • Developing automation for deployment, imaging, and multi-tenant resource allocation., • Optimising scheduler performance and resource utilisation across diverse workloads., • Building lifecycle management and automated remediation systems for large-scale clusters., • Creating Infrastructure-as-Code modules to support rapid, repeatable deployments across varied environments. About You You’re a pragmatic systems builder who thrives in complexity, enjoys autonomy, and understands what it means to own production at scale. You’ll likely bring: • 5+ years’ experience building distributed systems in Go within cloud-native environments., • Deep hands-on experience with Kubernetes and container orchestration., • A strong grasp of Infrastructure-as-Code (Terraform) and configuration management tools (Ansible, Puppet, or similar)., • Experience deploying and operating large-scale GPU clusters or HPC systems., • Working knowledge of ML infrastructure and familiarity with GPU drivers, CUDA, and container runtimes., • A low-ego, collaborative approach and a clear, proactive communication style. In short: This is a role for engineers who like big systems, hard problems, and meaningful ownership. You’ll be joining a team operating at the intersection of software, hardware, and AI.

We’re partnering with a next-generation wearables startup based in London that’s redefining how technology integrates with clothing. The company specialises in subtle, lightweight wearables — technology so seamlessly embedded you wouldn’t know it’s there. With a successful product already in the market, they’re now entering their second iteration of hardware and embedded systems as they scale. They’re looking to hire a full-time Lead Hardware Engineer, with a clear pathway to CTO within 12 months for the right individual. 🔧 The Role • Lead hardware development across wearable and sensor-based products, • Own embedded electronics, PCB design, and firmware development, • Integrate sensors for wearable applications, • Support regulatory and certification processes 🧠 Technical Environment • Embedded systems: ESP (current), moving toward Rockwell chips, • PCB tools: Altium Designer, EasyPC, • Wireless: Bluetooth Classic (ESP), Wi-Fi 👥 Team & Setup • Small, fast-moving team (8 people), • Majority onsite, with on-demand hybrid flexibility, • London-based office 💰 Compensation & Progression • £70k+ base salary + meaningful equity, • CTO compensation expected to rise closer to £100k (targeting Q4), • Significant influence over product and technical direction

Job Title: Senior Embedded Software Engineer Rank: Determined by the confirmed level and scope of experience Company: Chevalier Tech Limited Location: Colindale, Greater London (On-site) Salary: Salary is competitive and negotiable based on experience. Job Type: Full-time, Permanent About Us Chevalier Tech Limited is a tier-one supplier specialising in advanced technology systems, primarily for the automotive industry. Our products include Safety-Critical and Access Control Systems, Power Actuators, Smart Door Handles, and Control Electronics, which are integrated into high-end passenger and super cars worldwide. About the Role As a highly Experienced Software Engineer, you will lead the software engineering team, play a pivotal role in the design, development, and implementation of embedded software solutions for new and existing products. You shall ensure the relevant software development processes and records are applied and secured. Ultimately, you are expected to efficiently drive the development of new products, enhance existing ones, while always ensuring our products meet the highest industry standards for reliability and advances in technology. This is a highly important position offering the right candidate an excellent career growth coupled with a unique opportunity to fulfil own potential as a leader in innovation. Key Responsibilities • Lead the design, development of embedded software for automotive applications., • Oversee the development of new products, ensure high performance, reliability, compliance with industry standards, and suitability for volume production., • Enhance and refine existing software solutions., • Delegate tasks to the engineering team to ensure timely delivery, quality and efficiency., • Provide technical support and guidance to the team as and when needed., • Collaborate with hardware and mechanical engineers to integrate and test embedded systems., • Develop and use existing methodology to enforce best practices for software development, testing and preservation., • Produce and maintain high-quality technical documentation., • Ensure compliance with industry standards such as ISO 26262 and cybersecurity protocols. Essential Skills & Experience • Minimum of 8 years' experience in embedded systems development, preferably in the automotive or similar industry., • Proven leadership and team management skills, with experience in art of leading and delegating, • Proven experience in software development for volume production., • Extensive expertise in C programming for safety and security critical applications., • Hands-on experience with microcontrollers such as NXP, Onsemi, nRF, PIC, ARM and TI., • Familiarity with CAN and LIN communication standards., • Strong knowledge of SPI, UART, and I2C communication protocols., • Experience with BLE (Bluetooth Low Energy)., • Solid understanding of software debugging, troubleshooting, and testing strategies., • Ability to create and maintain production-level technical documentation., • Strong accountability and ability to drive technical projects from concept to completion., • Familiarity with ISO 26262 and automotive cybersecurity. Desirable Skills & Experience • Knowledge of Pulsed Radio UWB (Ultra-Wide Band Pulsed Radio Frequency)., • Familiarity with AUTOSAR., • Knowledge of Motor Drives and Controlled Systems. What We Offer • Competitive salary with Private Pension Scheme., • Career progression opportunities, including leadership and project ownership., • The chance to work on cutting-edge automotive products., • A friendly and dynamic work environment., • A significant role in shaping the future of embedded systems in the automotive industry., • Benefits: Casual dress, company events, worldwide travel opportunities., • Lump sum bonuses and ad-hoc promotion in addition to the standard year-end salary review Working Hours • Monday to Friday, • 9:00 AM - 5:00 PM Requirements • Must be based in the UK to apply., • Ability to commute or to relocate. If you are an ambitious and experienced engineer with a passion for innovation, leadership, and an inclination toward the automotive technology, we would be delighted to hear from you!

My client is looking for a mid–senior Desktop Support Engineer to join a fast-paced technology team supporting a demanding user base in a high-performance environment. This is a hands-on role suited to someone who enjoys working close to the business, taking ownership of issues end-to-end, and contributing beyond pure support. The role offers exposure to a broad range of technologies and the opportunity to be involved in project work alongside core systems and infrastructure teams. Key Responsibilities • Provide high-quality 1st/2nd line desktop and end-user support, • Support Windows 10/11 and the Microsoft 365 suite (Outlook, Excel, SharePoint, OneDrive), • Troubleshoot hardware, software, and connectivity issues, • Support financial and market data applications (e.g., Bloomberg), • Perform desk setups, workstation builds, and hardware break/fix, • Work closely with infrastructure and systems teams on upgrades and projects, • Contribute to documentation, process improvement, and automation initiatives Required Experience & Skills • 4–12 years of relevant desktop / end-user support experience, • Experience in fast-paced environments; financial services experience preferred but not essential, • Strong Windows desktop support experience and Microsoft stack knowledge, • Excellent troubleshooting skills across hardware, OS, and applications, • Comfortable working in smaller, agile teams with a high degree of responsibility, • Exposure to PowerShell scripting is advantageous, • Basic understanding of TCP/IP and general networking concepts, • Strong communication skills and a service-oriented mindset To apply: directly submit your CV to this job posting or email to .

Senior Android Engineer London (Hybrid — 2 days onsite per week) Kotlin • Compose • Coroutines • Modular Architecture • KMP A high-growth technology business in the data and privacy space is looking for a Senior Android Engineer to join the team building their flagship app. This product helps users understand, control and benefit from their data, and sits at the heart of a rapidly expanding consumer and B2B ecosystem. Their Android app is fully Kotlin-based, heavily modularised, and all new features are built with Jetpack Compose. Coroutines and Flows are used extensively throughout, testing is taken seriously (unit, UI and integration), and Kotlin Multiplatform is now being introduced to share code with iOS. You’ll be joining a collaborative engineering group working on major new features, shaping technical discussions, influencing architecture and API design, and helping to evolve a category-defining product used across the UK, US and several new international markets launching in 2026. What they’re looking for • 5+ years commercial Android experience, • Deep Kotlin knowledge, • Strong experience with Coroutines and Flows, • Experience with automated testing + CI/CD, • Ability to discuss architecture and make tradeoff decisions, • Clear written and verbal communication skills Benefits • Competitive salary + meaningful share options, • Hybrid working (3 days WFH), • 32 days holiday, • Your choice of hardware, • Annual training and conference budget, • Regular team days out, • Real autonomy within a fast-growing organisation

Robotics & Computer Vision Engineer Location : London Salary : £50,000 - £80,000 + Equity About the Role We are seeking a Robotics Software Engineer to design, develop, and optimize intelligent robotic systems that tightly integrate perception and control. This role focuses on building reliable, real-time software that enables robots to perceive their environment and act on it effectively in real-world scenarios. You will work across robotic control, perception, and simulation, contributing to systems that move from research and prototyping to deployment on physical robots. Responsibilities • Design and implement robotic control software that bridges perception and actuation, • Integrate computer vision and perception systems with robotic control pipelines, • Develop and maintain simulation environments for testing and validation, • Implement and deploy real-time computer vision algorithms for robotic applications, • Optimize system performance for low-latency, real-time operation, • Collaborate with cross-functional engineering teams on end-to-end robotic systems, • Research and prototype new approaches to robotic perception and visual understanding, • Debug, profile, and optimize complex software systems for real-world deployment Requirements • Strong programming skills in C++ and Python, • Experience with ROS and real-time robotic systems, • Understanding of robotics fundamentals and control theory, • Strong background in computer vision and image processing, • Experience with OpenCV and PyTorch or TensorFlow, • Experience building or optimizing real-time systems, • Strong debugging and performance optimization skills Nice to Have • Experience with robot hardware integration, • Knowledge of motion planning algorithms, • Familiarity with embedded systems, • Experience with ROS2, • Knowledge of 3D vision techniques, • Prior experience applying computer vision in robotics contexts, • Publications in top-tier computer vision or machine learning conferences

My client is looking for an experienced ML Infrastructure Engineer to support the deployment, optimisation and scaling of advanced machine learning models in production environments. This role sits at the intersection of research and engineering, focused on ensuring models are reliably transitioned from experimentation through to large-scale deployment. You will work closely with research and platform teams to build and maintain high-performance inference systems, improve deployment processes and help drive infrastructure improvements that enable faster model iteration and release cycles. This is a strong opportunity to work on technically complex challenges within a fast-moving and highly collaborative environment. The Role • Productionise machine learning models from research through validation, staging and live deployment, • Build, maintain and optimise scalable inference infrastructure supporting high-throughput, low-latency workloads, • Improve performance and reliability across GPU-based environments, • Design and implement model serving and deployment workflows, • Develop monitoring and observability tools to track system performance, errors and utilisation, • Support data preparation and model integration as part of the wider development lifecycle, • Collaborate with research, engineering and infrastructure teams to improve deployment efficiency and platform scalability, • Evaluate and integrate third-party infrastructure and inference tooling where appropriate Requirements • Proven experience deploying and maintaining ML inference systems in production environments, • Strong programming experience in Python and familiarity with modern machine learning frameworks, • Experience working with containerisation and orchestration technologies such as Kubernetes or similar, • Exposure to distributed systems and cloud-based infrastructure, • Experience supporting GPU workloads and performance optimisation, • Strong troubleshooting skills across performance, scaling and system reliability, • Comfortable working cross-functionally within research-led environments, • Ability to operate in fast-paced teams with evolving technical priorities Nice to Have • Experience building or improving model serving infrastructure, • Understanding of distributed training or inference techniques, • Experience debugging low-level performance or hardware-related issues, • Exposure to real-time or latency-sensitive ML applications

About Circuit Mind Electronic circuit boards are at the core of current and future inventions - space travel, medical robotics, autonomous transportation, augmented reality, bio-engineering. Yet today designing an electronic circuit board is an extremely manual, long and tedious process. At Circuit Mind we believe that this is wrong and we are on a mission to fix it, triggering the future of hardware design. We are creating an entirely new software engine for circuit boards, that takes as inputs the requirements of a circuit board and automatically outputs a complete design, ready for manufacture. As a Lead Software Engineer, you’ll create simple and elegant solutions to difficult technical problems that the world has not solved before. You will work in close collaboration with a highly-functioning team of software, electronics, algorithm engineers and product managers. Responsibilities • Collaborate with the product team and in-house hardware engineers to understand the problems of hardware engineering teams., • Plan, design, develop, test and iterate on the software solutions to those problems, accounting for functional and non-functional requirements., • Co-design, pair on, and review the development work of other lead software developers., • You’ll work on the entire company's backend code base: data models, algorithms, data pipelines, infrastructure, APIs, complex database queries, ML models. Qualifications We’re only considering exceptional candidates, with the following pre-requisites: • 5+ years of professional software development experience., • 2+ years of professional experience in Python., • 2+ years in a senior software engineer position., • Strong communication and team-work skills., • Experience working in an agile software development environment. Nice-to-haves • Experience in a tech lead position., • An interest in electronic engineering. Benefits • Collaboration with a friendly world-class team., • Above market rate salary and meaningful equity., • 25 days of annual holidays plus bank holidays., • Flexible working hours with two days a week in the office., • 5 weeks per year to work wherever you want in the world., • London Bridge office., • Extended parental leave., • Learning and development budget to support your professional development., • Yearly retreat., • Access to Circuit Mind's cutting edge EDA platform. Interview Process • Screening Interview, 20-30 min with Operations Manager Hour 2: Implement a new feature in a similar repository. • Final Interview, 120 min With Basilio (CTO and Co-founder) and Rob (Principal Full-stack Engineer). Deep dive into your experience with behavioral and experience-based questions., • Reference Checks: Two references that you provide will be contacted for feedback., • Offer: Based on successful completion of all stages. At Circuit Mind we value diversity and foster an inclusive environment. If you have an additional necessity or disability that requires accommodation, please let us know so we can adjust the interview process to your needs. We also ensure that Circuit Mind’s straight-forward and efficient hiring process respects your time.

Driven by Intelligence. Powered for the Future. Avant Intelligence is a global innovator in AI-powered robotics and intelligent inspection solutions. At the forefront of industrial digitalization, Avant develops autonomous robotic systems that enhance safety, efficiency, and reliability across energy, transportation, and EV-charging sectors. With cutting-edge expertise in artificial intelligence, computer vision, and edge computing, Avant transforms industrial inspection through intelligent automation — ensuring smarter monitoring and safer operations worldwide. As Avant continues to expand its footprint across Europe, we are seeking a highly motivated and structured Solutions Engineer to join our growing team in London UK. Job Description: Avant Intelligence is looking for a proactive and detail-oriented Solutions Engineer to support our expanding operations in London UK. The successful candidate will play a key role in delivering innovative AI-driven inspection and monitoring solutions to clients across Europe. Key Responsibilities: • Explore and validate AI and automation capabilities for quadruped robots, • Prototype lightweight integrations to support inspection, mapping, and monitoring workflows, • Conduct field testing, troubleshoot performance issues, and optimize real use cases, • Work with product and engineering teams to turn validated prototypes into scalable solutions, • Coordinate end-to-end delivery with internal teams and external partners, • Present demos, share findings, and support pre-sales technical communication with customers, • Ensure compliance with safety, data protection, and industry regulations in global deployments, • Support localization and on-site enablement in international markets What We’re Looking For: • 3+ years of experience in robotics, industrial automation, or AI solution engineering, • Hands-on prototyping skills (e.g., Python, JavaScript, or similar technical stack), • Experience integrating hardware + software and working with real-world operational workflows, • Strong analytical mindset, able to design experiments, evaluate results, and iterate quickly, • Cross-functional collaboration skills with product and delivery teams, • International project experience and ability to drive localization in overseas markets, • Fluent English; additional languages (e.g., German, Chinese) are a plus, • Curiosity for emerging AI technologies and a pragmatic approach to solution delivery Why Join Avant • Pioneering role in shaping the future of AI-powered inspection and robotics, • Flat hierarchy with direct access to decision-makers, • Competitive salary with performance-based incentives, • International and innovation-driven environment, • Dynamic, fast-growing company with global reach Location: London Start date: As soon as possible Working hours: Full-time 📩 Apply now and be part of Avant’s mission to deliver smarter, safer, and more autonomous industrial operations! Contact: Apply directly on LinkedIn

This role is with one of Dex’s trusted Partner companies. We work closely with their teams to truly understand their culture, goals, and what they’re looking for, so we can match you with the right opportunity for your goals! If you’re interested, apply here, or head to the website, where you can sign up and speak to Dex. After your call, you'll be sent the full match details. We’ll help manage your applications, and find other great matches to work you'll love. The Opportunity Dex is partners with some of the world’s most prestigious quantitative trading firms and systematic hedge funds. These organizations operate at the absolute bleeding edge of technology, treating the global financial markets as a complex data science problem. They are deploying massive compute clusters and proprietary machine learning models to trade billions of dollars daily. If you're an engineer who cares about nanoseconds, cache locality, and architecting petabyte-scale infrastructure, this is the pinnacle of technical challenge. What You’ll Work On • Architect Low-Latency Infrastructure: Design and implement the critical path for trading execution, building order management systems and market connectivity layers where performance is measured in microseconds., • Scale Data Pipelines: Engineer elegant, distributed systems capable of ingesting and processing petabytes of market and alternative data, ensuring absolute consistency for research teams., • Operationalize Machine Learning: Bridge the gap between research and production by deploying complex ML models into live environments under strict latency constraints., • Optimize the Stack: Go "close to the metal" to optimize performance across networking, I/O, and compute layers, squeezing maximum efficiency out of hardware., • Build World-Class Observability: Create robust monitoring and telemetry systems to provide real-time insights into pipeline health, trading activity, and model behavior., • Work with the Best: Work side-by-side with world-class researchers and mathematicians to translate theoretical strategies into production-grade code. What You'll Have • Polyglot Mastery: Exceptional command of at least one major systems language (C++, Rust, Java) for low-latency components, or Python for data and ML workflows., • Distributed Systems Expertise: Deep experience building high-throughput, fault-tolerant systems using modern messaging standards (e.g., Kafka, ZeroMQ, NATS)., • Systems-Level Intuition: You are comfortable debugging and profiling at the OS level, understanding memory management, CPU architecture, and network stack optimization., • Data Infrastructure: Familiarity with the modern data stack, including time-series databases, object stores, and streaming frameworks like Apache Flink or Spark Streaming., • Engineering Rigor: You write clean, testable, and reliable code. You understand that in this environment, a system failure can cost millions in seconds., • Bonus - ML Engineering: Experience with model serving, feature stores, or integrating ML pipelines into live production systems is highly valued. (Note: Previous finance experience is not required). To be considered for this role and others like it apply directly, or sign up to Dex and we'll help find the work that matters to you!

An exciting opportunity for a Forward Deployed Engineer has arisen with a rapidly growing AI company transforming manufacturing, based in London. This is a unique opportunity for a Forward Deployed Engineer who thrives on variety and real-world problems to deploy and support the AI systems on factory floors across a range of industries, owning the customer journey end to end. This a highly collaborative, customer facing role, working closely with research and engineering teams. You should expect to travel to customer sites and trade shows cross the UK and internationally, with no 2 weeks looking the same. You will commit to an onsite working model, required in the office when not out at customer site. Experience of the Forward Deployed Engineer will include: • Strong engineering background, • Experience deploying or supporting software and hardware systems, • Comfort working directly with customers and acting as the face of the company, • Ability to quickly understand unfamiliar manufacturing processes, • Experience taking projects from concept to deployment (startups a bonus), • Bonus: background in manufacturing, automotive, aerospace, or industrial systems If you’re a Forward Deployed Engineer looking for a high-impact role at the intersection of AI, hardware, and manufacturing, please apply today to learn more.

Sekkari: Building the Brains behind Autonomy Are you driven to push the limits of technology and unlock true autonomy? At Sekkari, we’re building the brains behind autonomy by designing advanced photonic integrated circuits that overcome processing bottlenecks of today’s systems. Our mission is to unlock true, real-time intelligence across aerial platforms, ground systems and robotics. Join our fast paced and supportive start-up, and help shape the future of computing for edge devices. Overview Sekkari is seeking an Embedded Software / Firmware Engineer to develop the foundational software layer for our hybrid electro-optical processor. This isn't a standard SOC; you will be writing the code that manages a unique memory hierarchy where data moves at the speed of light in L1 and shifts to electronic logic for L2/L3 and OS execution. You will be responsible for low-level hardware abstraction, kernel optimization, and ensuring our "autonomous brain" communicates flawlessly with the outside world. Responsibilities • Kernel & OS Integration: Port and optimize real-time operating systems (RTOS) or Linux kernels to run on our custom electronic architecture., • Driver Development: Write high-performance drivers for custom memory controllers, interfacing the electronic L2/L3 caches with the optical domain., • Hardware Abstraction: Develop the HAL (Hardware Abstraction Layer) that allows high-level autonomous software to leverage our chip’s unique electro-optical speed., • Performance Tuning: Work with the IC design team to profile and eliminate bottlenecks between the software execution and the hardware logic., • Bootloader & Security: Design secure boot sequences and firmware update mechanisms for edge deployment in robotics and aerial platforms. Qualifications • Traits: Curiosity is a key driving force for our work. We believe that curiosity brings discipline since it requires constant questioning. We also look for empathetic people. We want to cultivate a culture of empowerment where we look to collaborate and help each other grow., • Experience: 5+ years in embedded C/C++ and low-level firmware development, • Systems Knowledge: Deep understanding of OS internals (interrupt handling, memory management, scheduling), • Hardware Fluency: Ability to read schematics and datasheets; experience using logic analyzers and oscilloscopes to debug "first-bring-up" silicon, • Protocol Expertise: Experience with high-speed interfaces (PCIe, CXL, DDR) and standard protocols (I2C, SPI, UART), • Mindset: You thrive in the "undefined" space of a startup where you are often the first person to run code on brand-new hardware How to Apply Interested candidates are invited to submit their resume and a compelling cover letter to . In your cover letter, please highlight your relevant experience and explain why you are passionate about contributing to Sekkari's mission to build the brains behind autonomy.

Optical AIT/AIV Engineer – Earth Observation Satellites We are seeking an experienced Optical AIT/AIV Engineer to support the onsite assembly, integration and verification of an Earth Observation optical payload for our NewSpace client - a rapidly expanding space technology company based in the UK. This is an excellent opportunity to play a hands-on role in the delivery of advanced Earth Observation space hardware within a high-performance team environment. Key Responsibilities • Perform optical and mechanical alignment of instruments in cleanroom environments, • Carry out AIT/AIV activities across optical payload subsystems, • Operate and maintain test equipment such as interferometers, CMMs, thermal vacuum chambers, MTF rigs and integrating spheres, • Support build and verification of optical, mechanical and electrical ground support equipment (GSE), • Troubleshoot and resolve hardware issues during integration and test, • Produce and maintain build procedures, test reports and cleanroom documentation, • Manage materials, tooling and cleanliness protocols, • Provide feedback to design teams on manufacturability and testability, • Work closely within a multidisciplinary project team Essential Qualifications & Experience • Degree in Engineering, Physics, Optics or a related discipline (or equivalent experience), • Hands-on AIT/AIV experience on Earth Observation satellite programmes, • Cleanroom experience in low-volume, high-technology manufacturing environments, • Experience handling optical systems and precision optical hardware, • Experience operating interferometers, CMMs, thermal vacuum chambers, or similar environmental/optical test equipment is highly desirable. Desirable Skills • Methodical, detail-oriented and confident with hands-on instrumentation, • Strong technical documentation and reporting skills, • Able to work autonomously and within cross-functional teams, • Resilient under schedule pressure, • Strong analytical and communication skills, • Adaptable and proactive, • Passion for space technology and delivering high-quality flight hardware Why Apply? • Opportunity to work on advanced Earth Observation satellite hardware, • Gain valuable onsite experience with a leading satellite manufacturer, • Work in a collaborative and technically focused environment, • Contribute directly to the delivery of flight hardware If you are interested, please apply today!

Bermondsey Electronics is a contract electronics development company looking for an embedded software developer to expand the team. The successful applicant will work on a wide variety of systems, with different targets and design goals, based from the office in Bermondsey. This role is also open to motivated graduates or early-career engineers who have a good understanding of embedded C and are keen to develop their skills quickly. Candidates with limited professional experience are welcome, provided they are comfortable working hands-on with code and hardware, learning new platforms rapidly, and moving between different projects as required. We need a new engineer to be involved in peripheral and board bring-up. This means testing PCBs coming in from clients. Clients have occasionally tested boards but not always, and usually not fully. They might not have the skills or might not know how a specific peripheral works. Our job is to prove the board fundamentally works, and develop or debug drivers as necessary. Higher level application code is usually done by those specialists and is not expected to be a fundamental part of this role. It's a useful skill if you have it, though. In the last year, this has meant working with STM32, DA1453x, NXP iMX RT and RW6xx platforms, iMX 8M Plus and Nano. Software platforms range from bare metal to FreeRTOS to Zephyr, through Linux and all the way up to Android. At each stage, clients have either not been able to supply drivers, or a delivery from a supplier has had to be debugged or modified. With that done, the PCB is handed off to application developers, or the client will issue us another board to repeat the cycle. Suppliers usually deliver drivers in C. These are often of unknown quality. They may need configuration, and sometimes a device tree. As examples: We ported TI's CC3351 driver to STM32 and brought up lwIP on FreeRTOS We brought up a new iMX8MP Linux platform using LVDS and a bespoke RFID driver We rewrote an ESP32 bootloader for a client to update partition tables OTA We tested and verified RW610 power modes in Zephyr We rewrote the STM32 Eclipse ThreadX USB Audio Host driver to support USB MIDI We debugged an Infineon WiFi driver low power mode on Android on iMX8MP Typically LLMs do not have enough training data to help. They usually cannot work out schematic errors, or spot placement issues on a board. If you use LLMs heavily, you are unlikely to find them as useful in this role. It can mean writing and/or debugging drivers like SPI, DAC or LVDS. Typically test and measurement gear is needed, e.g. logic analyser, scope, bench power supply etc. There can be a lot of time configuring demo code to run in the mode the client requires, perhaps on a different target. When the code is running, we may need to capture signal traces to diagnose the fault. When we have the fault, we might need to change the code or the hardware, or both, for the client feature to work. This role requires a practical, hands-on approach. Candidates are expected to actively write, debug, and test code, work directly with hardware, and spend time investigating issues in depth. Applicants who are not prepared to engage directly with low-level code, testing, and debugging, or who rely primarily on automated tools without deeper understanding, are unlikely to find this role suitable. Please note this role is not to develop hardware. Clients supply us boards to bring up. If you want to design PCBs from scratch, this is not the job for you. If you enjoy bringing up software stacks on new hardware, this is the job for you! Any knowledge of embedded OS is an advantage (FreeRTOS, Zephyr, Linux/Android, ThreadX). Ability with a soldering iron is useful. Familiarity with automated testing is useful but not required (e.g. hardware-in-the-loop). If you thrive in responsive, hands-on work and enjoy solving difficult problems efficiently, this could be the right role for you! Candidates must already have unrestricted permission to work in the UK. We CANNOT provide visa sponsorship, cannot extend visas, and cannot consider candidates whose right to work is time-limited or dependent on future sponsorship, including Graduate visas. Please do not apply if you require visa sponsorship now or at any point in the future. Candidates must know embedded C programming and any one of the following: • Embedded Linux e.g. Yocto or Buildroot build system, • Python, • Android build system, • Networking and communication protocols, • Embedded OS use, • Power optimisation, • Makefiles / build configuration systems, • Basic soldering, • Unit testing 40 hours of full time effort are expected every week. Remote working is offered, although 2 days per week on site are required. Flexitime is offered as standard, although all hours must be accountable. 25 days' vacation are offered, growing with tenure. Job Types: Full-time, Permanent Pay (Based on experience): £40,00.00 - £55,000.00 per year Benefits: • Flexitime, • Sick pay, • Work from home Schedule: • 8 hour shift, • Flexitime, • Overtime Education: • Diploma of Higher Education (preferred) Experience: • C Programming: 1 year (preferred), • Software engineering: 1 year (required) Right to work in the UK – important reminder: • Applications from candidates who do not already have unrestricted UK work authorisation will not be considered., • Work Location: Hybrid remote in London SE1 with 2 days per week on site near London Bridge.

Lead Electrical Engineer – Please contact An innovative clean‑energy organisation is seeking an experienced Electrical Engineer to support the development of next‑generation energy systems and to contribute to customer project delivery. This role is ideal for someone who wants to make a meaningful impact on the transition to low‑carbon energy and who enjoys working across both product development and real‑world site projects. The successful candidate will take ownership of electrical design activities, lead test campaigns for new products, and support customer deployments. You will collaborate with a multi‑disciplinary engineering team to evaluate electrical strategies, overcome design challenges, and drive high performance in commercial applications. Key Responsibilities • Serve as the technical authority for electrical engineering, acting as the primary point of contact for all electrical systems across product development and customer projects., • Support product and site teams with technical decisions, hardware selection, power strategies, and coordination across engineering and customer interfaces., • Lead the electrical architecture, specification, and detailed design of core systems, including internal layouts, interfaces, protection systems, and power distribution panels., • Create, review, and maintain all key electrical documentation, such as system specifications, schematics, single‑line diagrams, interface definitions, technical notes, and installation requirements., • Collaborate closely with Mechanical, Thermofluid, and Site Engineering teams to define routing, installation constraints, interfaces, and system‑level integration into customer environments., • Plan, manage, and coordinate external subcontractors and specialists—including designers, site engineers, and consultants—ensuring high‑quality deliverables aligned with project needs., • Oversee and manage the electrical engineering function as it grows, including line management of engineers or contractors., • Support procurement and commercial teams by defining technical requirements, reviewing supplier proposals, and contributing electrical expertise to RFQs, contracts, and customer/supplier discussions. Essential Requirements • Bachelor’s or Master’s degree in Electrical Engineering (or equivalent)., • Demonstrated experience working as a system‑level electrical engineer responsible for end‑to‑end electrical design rather than isolated component tasks., • Practical experience producing and reviewing electrical specifications, schematics, and technical documentation, with the ability to communicate effectively with non‑electrical colleagues., • Experience managing multiple projects and coordinating external subcontractors, ensuring outputs meet technical and schedule requirements., • Strong understanding of industrial electrical systems, including power distribution, switchgear, transformers, and protection at 400V / 690V in the 1–5MW range., • Familiarity with electrical industrial standards and regulatory frameworks (UK or equivalent)., • Experience working both on product development and in site‑based project environments, or an understanding of how design decisions impact installation, commissioning, and operation., • Highly organised, with the ability to own documentation, track actions, and manage interfaces across technical and commercial teams., • Comfortable operating as the internal electrical authority while knowing when to involve specialist consultants. Distinguishing Factors (Nice to Have) • Prior experience acting as a technical owner for electrical systems within a multi‑disciplinary engineering organisation., • Existing relationships with electrical subcontractors or specialist consultancies (e.g., design houses, protection study providers, commissioning engineers)., • Experience specifying industrial electrical systems, high‑power loads, or similar complex electrical infrastructure., • Exposure to electrical aspects of industrial energy systems, heat generation, or electrification of process plant., • Line‑management experience within a small or growing technical team., • Experience supporting site installation and commissioning activities., • Familiarity with UK/European electrical standards, grid interfaces, and regulatory frameworks.

Principal Embedded Software Engineer £75,000 - £90,000 + equity London (3 days per week in office) Overview TalentEdge Technology are looking to hire a Senior Embedded Engineering Leader to take ownership of the firmware stack for a next-generation, AI-enhanced connected music hardware platform. This role is hands-on and deeply technical, suited to an engineer who enjoys working across the full embedded stack, from low-level hardware bring-up through to cloud-connected features and who places a premium on robustness and real-world reliability. What You’ll Be Working On: • Ownership and evolution of the embedded firmware stack for connected consumer hardware, • Firmware development in C/C++ on NXP i.MX RT (480MHz Cortex-M7) platforms, • Design and implementation of critical systems, including Over-the-air update infrastructure, Bluetooth audio (A2DP / AVRCP), Wi-Fi connectivity and device provisioning, Bootloaders and persistent state management, Audio DSP integration, • Ensuring production-grade stability, performance, and fault tolerance, • Close collaboration with mobile, web, backend, and hardware teams to deliver cohesive end-to-end experiences, • Supporting device certification and production readiness, including FCC / CE compliance, • Providing technical leadership, architectural direction, and high-quality code review within the embedded domain What We’re Looking For: Essential experience: • Senior-level embedded firmware experience, ideally in consumer electronics (Audio would be even better), • Strong C & C++ skills on resource-constrained systems, • Experience with FreeRTOS or comparable RTOS environments, • Hands-on work with Bluetooth and Wi-Fi stacks, • Familiarity with embedded build systems such as CMake, • A strong engineering mindset around reliability, resilience, and real-world failure modes Desirable experience: • Audio, DSP, or media-related systems is HUGELY desirable, • Shipping hardware products at scale, • OTA update systems and secure firmware pipelines, • Certification processes (FCC, CE, or similar) Why This Role You’ll be joining a small, senior team operating at the intersection of hardware, software, music, and AI, with a proven track record of shipping devices at scale and a significant installed user base. The company is emerging from a period of stability, but with major next-generation products planned for 2026, and this role will be central to shaping the technical direction and execution of those devices. Sound like you? Apply now!

Join a globally distributed technology company building secure infrastructure software for connected devices operating at scale. Their platform powers fleets of embedded and IoT devices worldwide, enabling reliable deployment, remote management, and long-term maintenance in production environments. With a strong open-source foundation and a remote-first, async culture, the team values technical ownership, thoughtful engineering, and clear written communication. They are looking for a Project-Level Engineer to take end-to-end responsibility for operating system features and long-term device support across a diverse hardware ecosystem. Responsibilities • Own the full lifecycle of embedded Linux OS features—from design and architecture through implementation, release, and long-term maintenance., • Maintain and evolve Yocto/OpenEmbedded layers and recipes, ensuring system stability and long-term support for devices deployed in the field for years., • Define and execute LTS strategies that balance innovation with production-grade reliability., • Manage, update, and integrate Board Support Packages (BSPs) across multiple silicon vendors and hardware platforms, including kernel upgrades and hardware compatibility validation., • Design and implement secure boot chains of trust (e.g., U-Boot HAB, UEFI Secure Boot, verified boot) to guarantee device integrity from power-on to user space., • Work hands-on with the Linux kernel, device trees, and bootloaders (U-Boot, GRUB) to support new hardware and troubleshoot low-level system issues., • Integrate and optimize GPU (Mesa/DRM/KMS) and NPU drivers to enable hardware-accelerated graphics and Edge AI workloads., • Collaborate closely with container runtime technologies to ensure seamless interaction between the host OS and application containers, including networking, storage, and security boundaries., • Debug and stabilize complex networking stacks (NetworkManager, ModemManager, WiFi, LTE/cellular) to ensure reliable connectivity in demanding field conditions., • Triage and resolve advanced technical support cases, using real-world feedback to drive continuous product improvement., • Document research, architectural decisions, and implementation details in a shared knowledge base to support an async-first engineering culture. Requirements • Proven professional experience with the Yocto Project and OpenEmbedded, including creating and maintaining layers, recipes, and BSPs., • Strong understanding of the BitBake build system and embedded Linux build pipelines., • Hands-on experience implementing secure boot mechanisms on embedded platforms., • Deep knowledge of the Linux kernel, device trees, and bootloaders such as U-Boot and GRUB., • Demonstrated ability to independently scope, plan, and deliver complex technical projects from concept to production., • Strong debugging skills across system-level components, including kernel, drivers, and networking., • Excellent written English and comfort working in a fully remote, asynchronous team environment., • In-depth understanding of Docker/OCI specifications, runc, container networking, and container security models., • Advanced networking experience (iptables/nftables, routing, cellular/satellite debugging)., • Experience with embedded Linux graphics stacks (DRM/KMS, Mesa, Wayland)., • Familiarity with AI/ML frameworks (e.g., TensorFlow Lite, ONNX) and hardware accelerators (NPUs/GPUs/TPUs)., • Experience with Rust for system-level development. If your experience and motivation align with this opportunity, apply now or send your CV directly to . By applying to this role you understand that we may collect your personal data and store and process it on our systems. For more information please see our Privacy Notice () In accordance with local employment laws, applicants must have current, valid authorisation to work in United Kingdom at the time of application. We are unable to sponsor employment visas for this role. Applications from individuals without existing work authorisation for United Kingdom cannot be considered.

Wearable Technology Specialist This is a rare opportunity to join as a first technical hire (Founding Engineer) at an early-stage wearable technology startup focused on ushering in a new era of health, tech and AI consumer use. You will be instrumental in co-designing and building a signature MVP from scratch with the Founder & CEO. Someone with big ideas but a keen eye for detail would be ideal. This is a paid, part-time consultancy role demanding 1 day a month initially with the possibility of much more if the MVP is successful. The Founder & CEO You will be providing one-on-one counsel to the Founder who has a strong wellness and healthcare vision for game-changing wearable devices, a PhD in Biochemistry from the University of Cambridge and 13+ years delivering medical consulting for top-tier Pharma and Tech giants within both corporate environments and through agile consulting expertise. Your technical expertise will complement the Founder’s strong scientific and clinical expertise. With a relentless passion for accuracy within big-picture health, the Founder is committed to extreme field testing. They personally validate sensor performance in diverse conditions, ranging from high-intensity training and aquatic environments to sedentary office settings. The Role This is ideal for someone currently working within a corporate or other full-time setting who has a passion for ‘thinking big’ and refining the next generation of HealthTech. You will provide expertise on MVP design and build in stages across several 1-day consulting instalments in the lead up to fundraising: • Concept and feasibility, • Architecture & requirements (blueprint), • Planning and costs, • Hardware prototyping, • Testing and validation Initial planning stages working with the Founder will be conducted remotely or with an optional London-based space or on-site manufacturing workstation once the hardware prototyping stage is reached. Key Counsel Needed: • Step-by-step plan on building the MVP to match the Founder’s vision, • Cost calculations to build the MVP, • Recommendations on multiple avenues to test technical features in the lead up to the MVP build, • Versatile mindset with the expectation to design, test, refine before we showcase a successful product to investors, • Consideration of efficiency across manufacturing options About You To be successful in this role, you’ll bring: • An engineering qualification, • 2-3+ years’ experience in a role where you have been involved in the design and manufacture of a successful MVP, wearable device or devices, • Wearable sensor experience (desired), • Exceptional attention to detail, • An appreciation that consumer adoption requires strong usability, • A passion for the Founder’s vision of producing wearable HealthTech to usher in a new era of health, tech and AI consumer use What’s on Offer Within the initial phase: • Limited paid consulting days with a competitive fixed fee and flexibility around your full-time commitments., • Discretionary bonus options based on a successful partnership. This could be a cash bonus, equity in the company, co-founding routes, or long-term role., • The chance to reinvent the wheel for HealthTech in a very selective, lean environment where things can move as quickly as your ideas and execution. If this sounds like you, we’d love to hear from you. Please apply directly or email

Principal Electrical Design Engineer Introduction Join a globally recognised defence and technology organisation delivering complex, safety-critical systems that protect and support national infrastructure. This Principal Electrical Design Engineer role sits at the heart of cutting-edge maritime programmes, shaping high-availability control systems that genuinely matter. Role Overview: • Location: London (Hybrid Working Available), • Package: Competitive salary + performance bonus + comprehensive benefits, • Industry: Defence & Engineering What You’ll Be Doing: • Leading electrical design activity across major platform management and control system programmes, • Designing and developing electrical panels, cabinets and enclosures aligned to demanding operational requirements, • Producing and reviewing schematics, wiring diagrams and technical documentation to industry and defence standards, • Taking ownership of power and control system designs from concept through to integration and qualification, • Justifying design decisions, component selections and system configurations with clear technical rationale, • Managing bills of materials, specifications and engineering documentation for contractual delivery, • Troubleshooting and resolving electrical issues across design, manufacturing and integration phases, • Supporting requirement definition and ensuring compliance within safety-critical environments Main Skills Needed: • Proven experience in electrical design engineering within complex engineering projects, • Background as an Electrical or Hardware Lead (or ready to step into that level of responsibility), • Strong understanding of electrical standards, ideally within defence or regulated industries (e.g. Lloyd’s, Def Stan), • Experience designing power and control systems, including panel and cabinet layouts, • Confident working with electrical CAD tools and structured documentation processes, • Degree-qualified in a relevant engineering discipline, or equivalent hands-on experience, • Able to operate effectively in fast-paced, high-accountability environments What’s in It for You: • Flexible and hybrid working, including the option of a compressed fortnight, • Private healthcare and cash health plan, • Holiday buy and sell scheme, • Performance-related bonus, • Structured career development, mentoring and ongoing training, • The opportunity to work on mission-critical systems that directly support UK defence capability Big plans. Big impact. Ready to be part of it? We are an equal opportunity employer and value diversity at our company. We do not discriminate on the basis of race, religion, colour, national origin, gender, sexual orientation, age, marital status, veteran status, or disability status. By applying you are confirming you are happy to be added to the Addition Solutions mailing list regarding future suitable positions. You can opt out of this at any time simply by contacting one of our consultants.

A systematic hedge fund with offices across major financial centres is seeking to expand its London-based technology team. The firm is seeking a talented Core Systems Engineer to focus on its internal Windows infrastructure environment. Windows serves as the primary desktop operating system, and many core infrastructure services are delivered through Windows Server platforms. This role is key to ensuring performance, reliability, and standardisation across the Windows estate. The successful candidate will work to improve, automate, and optimise the infrastructure environment, contributing to deployment strategy, operational stability, and cross-team collaboration in a global setting. Key Responsibilities • Maintain, improve, and standardise Windows desktop and server environments, • Automate deployment, configuration, Infrastructure-as-Code, and monitoring workflows, • Troubleshoot Windows operating systems and related applications, • Collaborate with global technology teams on deployments, issue resolution, and new initiatives, • Develop and maintain centrally managed automation scripts and repositories, • Monitor and optimise hardware performance across physical and virtual environments, • Contribute to documentation, process improvement, and infrastructure design Required Experience & Skills • Advanced experience with Microsoft Windows 10/11 and/or Windows Server 2016/2019/2022, • Experience with VMware environments, • Strong scripting/programming capability in PowerShell (preferred), Python, or C#, • Working knowledge of Active Directory, Kerberos, DNS, and Group Policy, • Demonstrated troubleshooting capability across Windows systems and applications, • Experience with hardware monitoring and performance tuning in physical or virtual infrastructure, • Ability to solve complex problems in a fast-paced environment, • Clear and concise communication skills, with a strong service-oriented approach To apply, please submit your CV or contact:

AV Engineer – Enterprise Environment - City, London, EC2 Up to £50,000 | City of London, EC2 | Hybrid (3 days onsite minimum) We are hiring an experienced AV Engineer to support a high-end enterprise environment based in brand-new offices in Moorgate, London, EC2. This role sits onsite with a leading global financial institution and is delivered via an IT solution provider. You will be responsible for supporting over 50 meeting rooms and a large event space, ensuring seamless hybrid collaboration experiences across the business. The Role This is a hands-on, user-facing AV support position. You will: • Perform daily room checks to ensure all systems are fully operational, • Provide tiered support for AV hardware and collaboration systems, • Troubleshoot audio, video, control and connectivity issues, • Support live meetings, hybrid events and executive presentations, • Work closely with Infrastructure, IT and Facilities teams, • Deliver a high-quality, professional service to non-technical stakeholders Technology Environment You will be working across: • Poly VC systems (Studio X, G-Series, Poly Lens), • Shure audio systems (MXA arrays, wireless mics), • Biamp Tesira DSP, • Microsoft Teams Rooms, • Dell & HP collaboration hardware Experience across most of the above is preferred — strong practical troubleshooting ability is essential. What We’re Looking For • 3–5+ years professional AV engineering experience, • Strong problem-solving skills, • Confident working in enterprise environments, • Comfortable supporting senior stakeholders, • Clear communicator who can simplify technical issues, • Professional, reliable and proactive Vendor certifications (Crestron, Biamp, Poly, Shure, CTS) are beneficial but not essential. Working Pattern Shift-based coverage (shared rota) Occasional event support (shared between team) Minimum 3 days onsite per week Why Join? • Brand new, premium office environment, • Stable enterprise client, • Opportunity to expand into wider IT / infrastructure exposure, • Collaborative team culture If you’re an AV Engineer who takes pride in making sure everything just works — we’d love to hear from you.

All3 is transforming how buildings are conceived, developed, and delivered. We combine AI-powered design with robotic prefabrication and on-site assembly to build custom architecture at the cost and speed of mass production - unlocking even the most complex sites. We’re currently seeking a Senior Perception Engineer to lead the development of our 2D/3D perception systems, enabling reliable manipulation and autonomy in complex, semi-structured construction environments. You’ll architect and implement the perception capabilities deliver reliable manipulation and autonomy in dynamic and unstructured environments. Responsibilities: • Design, develop, and deploy 2D and 3D perception pipelines for object detection, tracking, segmentation, etc.;, • Ensure robust perception for manipulation under varying environmental conditions., • Fuse and calibrate data from multiple sensors (RGB, depth, IMU, etc.) to achieve reliable scene understanding;, • Train and fine-tune domain specific perception models from scratch for novel and semi-structured construction environments;, • Design and integrate end-to-end pipelines, from data acquisition and labeling to inference, deployment, and feedback-based improvement;, • Lead integration and testing of perception systems in simulation and real-world hardware environments;, • Collaborate closely with manipulation, control, and autonomy engineers to deliver cohesive, real-time robotic behavior. Expertise: • Strong proficiency in Python and C++ for production-grade robotics software., • Deep understanding of computer vision and 3D perception;, • Proven ability to build perception models from the ground up, including data generation and augmentation, model design, and optimization;, • Experience designing, integrating, and maintaining end-to-end perception pipelines, from raw sensor data to deployed systems;, • Hands-on experience with sensor selection, placement, and calibration., • Expertise in training and fine-tuning models for perception in novel or domain-shifted environments;, • Solid foundation in MLOps, including dataset management, training infrastructure, and deployment pipelines. Nice to have: • Experience in construction robotics, heavy machinery, or large-scale manipulation tasks., • Familiarity with vision-language models and their use in robotic task planning., • Experience deploying optimized, reliable, real-time perception code on embedded or distributed robotic systems. We offer: • Chance to be a part of a large-scale project;, • Team driven by impactful cause;, • Hybrid format of work with the lab located in Park Royal;, • Private dental or full medical (dental treatments aren’t covered) insurance;, • Flexible working schedule;, • 28 days of annual leave. At All3, you’ll shape the next frontier of architecture and robotics, where AI meets construction. You’ll work alongside world-class roboticists, designers, and engineers to push the limits of what’s possible in autonomous building systems.

Hardware Infrastructure Engineer (Server Platforms) This role sits within the core infrastructure operations function, supporting mission-critical research and trading systems. If you enjoy owning physical server environments end-to-end and working closely with vendors and data centre teams, this one is for you. What you’ll be responsible for • Ownership of physical server health, lifecycle, and readiness, • Hardware fault investigation and coordination to resolution, • Vendor case management, escalations, and RMAs, • Planning and executing refresh, replacement, and firmware activities, • Working with data centre teams on installs, cabling, and break/fix, • Maintaining asset accuracy, lifecycle status, and documentation, • Supporting capacity and growth planning initiatives Must-Haves • 5+ years in server / hardware / data centre infrastructure roles, • Deep understanding of enterprise server components and diagnostics, • Practical experience with HPE OneView, iLO, and Redfish APIs, • Linux exposure for provisioning and troubleshooting, • NetBox or similar CMDB / asset tools, • Ansible or infrastructure automation experience, • Vendor management and RMA handling experience, • Enterprise hardware platforms: HPE, Dell, Supermicro, Lenovo, • Strong ownership mindset and documentation discipline Nice-to-Have • Experience in low-latency, HPC, or financial environments, • Observability tooling (Prometheus, Grafana, VictoriaLogs), • Firmware lifecycle programs at scale, • Python / Bash scripting, • Capacity planning or refresh program exposure

Engineered Arts is seeking an Information Security and Compliance Engineer to own the technical and operational execution of information security and cybersecurity compliance across products, cloud infrastructure, internal systems, and Robot-as-a-Service (RaaS) platforms. Reporting to the Head of Compliance, this role is responsible for implementing, operating, and maintaining security controls, supporting certification to ISO 27001, SOC 2, and other relevant security frameworks, and embedding security-by-design into engineering, IT, and product operations as the business scales globally. This is a hands-on role with clear operational ownership of information security BAU, working closely with engineering, DevOps and IT, product management, and external auditors. This job can be worked remotely with bi-monthly visits to the London (Farringdon) office Key Responsibilities Information Security and ISMS Operations • Implement, operate, and maintain the Information Security Management System (ISMS) aligned to ISO 27001., • Maintain risk assessments, risk registers, Statements of Applicability, and control mappings., • Collect, manage, and present evidence for ISO 27001 certification and surveillance audits., • Implement and maintain security controls across:, • Cloud infrastructure and internal IT systems, • Robotics platforms, operating systems, and supporting services, • eCommerce, RaaS, and customer-facing platforms, • Work with engineering teams to embed security-by-design into system architecture, development pipelines, and operational workflows., • Operate vulnerability management processes including:, • CVE monitoring and triage, • Patch management coordination, • Tracking and closure of remediation actions, • Coordinate penetration testing and security assessments across products, platforms, and infrastructure., • Support identity and access management (IAM) compliance including:, • Role-based access control, • Quarterly access reviews, • MFA/2FA enforcement, • Support encryption, key management, backup, and recovery controls., • Conduct security assessments of suppliers, cloud providers, and third parties., • Review security documentation, certifications, and contractual security requirements., • Maintain security policies, procedures, standards, and technical evidence., • Support internal audits, external certification audits, and customer security due diligence requests., • Support delivery of security awareness and role-specific training., • Act as a trusted security partner to engineering, IT, and product teams., • Promote pragmatic security that enables innovation while managing risk. Essential Experience and Expertise • Hands-on experience in information security engineering, security operations, or security compliance roles., • Practical experience operating an ISO 27001 aligned ISMS, including risk management and audit evidence., • Working knowledge of cloud, infrastructure, and application security controls., • Experience with vulnerability management and incident response., • Ability to translate security and compliance requirements into practical technical controls., • Experience working with engineering, IT, non-technical stakeholders, and external auditors., • Experience with SOC 2 or multi-framework security environments., • Exposure to product, platform, or robotics/embedded security., • Familiarity with IAM, data protection, and privacy-related controls., • Experience with supplier and third-party security assessments., • Involvement in security awareness or training initiatives., • Experience supporting scaling or globally distributed organisations. Reporting and Authority • Reports directly to the Head of Compliance., • Acts as the operational owner for information security and cybersecurity BAU., • Escalates strategic, high-risk, or novel security issues appropriately. Personal Attributes • Highly organised, methodical, and evidence-driven., • Comfortable operating autonomously as the day-to-day security owner., • Calm and structured during audits and security incidents., • Sound judgement in balancing security, usability, and delivery pace. Role Fit This role is ideal for an Information Security and Compliance Engineer who wants clear ownership, hands-on impact, and the opportunity to build security foundations that support the safe scaling of advanced robotics, AI platforms, and global services. About Engineered Arts Engineered Arts is the leading manufacturer of full-size humanoid robots used for entertainment, education and communication. With 20 years of hardware and software development, our robots have been sold in over 30 countries worldwide with customers such as NASA, PwC, Meta and many more. Our Ameca robot is well known as ‘the face of AI’ and a social media viral success, taking advantage of the generative AI craze. Along with our ultra-realistic Mesmer range of animated figures our robots continue to surprise and excite visitors at museums, theme parks, visitor attractions and trade shows as well as aid leading universities with AI and robotics research. Our robots are poised to break into the future mega-expansion service robot segment, with applications such as front of house, receptions, check-in desks, information points and PoS. We are also exploring how our humanoid robot technology can disrupt other robotics sectors such as the growing cobot sub-segment of the industrial robotics market. We are a team of dedicated engineers and creatives striving to develop the very best experiences for our customers. Our internal motto is ‘Be Wow’, everything we do is fun, entertaining or surprising to encounter. We always push the boundaries of what is possible in humanoid robotics, researching and developing new systems and techniques to further their appeal. We explore and challenge the human perception of robots as well as the fear and discomfort and the excitement and joy life-like mechanical humanoids present. At Engineered Arts, innovation is at the core of everything we do — and we believe true innovation only happens when diverse minds come together. We are committed to building a workplace where people of all backgrounds, identities, and perspectives feel welcome, supported, and empowered to contribute. Whether you’re an engineer, developer, or creative thinker, we value what makes you unique. We actively promote inclusion across our hiring, design, and development practices, and we’re always looking for new ways to reflect the world around us — in our team, our robots, and our ideas. Because building the future means including everyone in it.” We are committed to equal opportunity in employment and comply with all applicable non-discrimination and equal employment laws in the regions where we operate.

Humanoid is the first AI and robotics company in the UK, creating the world’s most advanced, reliable, commercially scalable, and safe humanoid robots. Our first humanoid robot HMND 01 is a next-gen labour automation unit, providing highly efficient services across various use cases, starting with industrial applications. Our Mission: At Humanoid we strive to create the world’s leading, commercially scalable, safe, and advanced humanoid robots that seamlessly integrate into daily life and amplify human capacity. Vision: In a world where artificial intelligence opens up new horizons, our faith in its potential unveils a new outlook where, together, humans and machines build a new future filled with knowledge, inspiration, and incredible discoveries. The development of a functional humanoid robot underpins an era of abundance and well-being where poverty will disappear, and people will be able to choose what they want to do. We believe that providing a universal basic income will eventually be a true evolution of our civilization. Solution: As the demands on our built environment rise, labour shortages loom. With the world’s workforce increasingly moving away from undesirable tasks, the manufacturing, construction, and logistics industries critical to our daily lives are left exposed. By deploying our general-purpose humanoid robots in environments deemed hazardous or monotonous, we envision a future where human well-being is safeguarded while closing the gaps in critical global labour needs. We are seeking a highly skilled and motivated Staff/Senior Simulation Robotics Engineer to join our innovative team. The ideal candidate will have a strong background in robotics, simulation, and software development and will be responsible for developing and maintaining advanced simulation environments for robotic systems, enabling the testing and validation of complex robotic behaviors and algorithms. The successful candidate will have the opportunity to work on cutting-edge robotics projects with a talented team in a flexible and supportive work environment with opportunities for professional growth and development. What You’ll Do: • Simulation Development: Design and implement high-fidelity simulation environments for robotic systems, incorporating realistic physics, sensor models, and environmental interactions., • Software Engineering: Write clean, maintainable, and scalable code, utilizing modern software engineering practices and tools., • Digital Twin Integration: Develop and maintain interfaces to facilitate the creation of a digital twin for seamless transfer of insights and control strategies between simulation and real robots., • Gym environment. Design Gym-like environments to support the robot learning team in developing locomotion and manipulation policies., • Algorithm Testing and Data Analysis: Design and execute simulation-based tests to evaluate robotic algorithms and control systems, and analyze simulation data to gain insights and identify areas for improvement., • Cross-Team Collaboration: Work closely with other engineers and researchers, especially across multiple teams such as manipulation, locomotion, VLA, Reasoning Design & Hardware, and Control & Integration, to ensure seamless integration of simulation tools into the overall robotic development workflow., • Trend Awareness: Stay informed on current trends in the simulation field and proactively explore their implementation within the company. We’re Looking For: • Education: B. Sc., Master's or Ph.D. in Robotics, Computer Science, or a related field., • Strong programming skills in C++, Python, • Deep expertise in ROS2 and the ROS2 Control stack., • Experience with robotic simulation frameworks, such as MuJoCo and Isaac Sim., • Knowledge of robotic kinematics, dynamics, and control., • Experience with gym-like environments for robot learning., • Familiarity with imitation learning, VLA models & Computer Vision techniques., • A proactive, can-do attitude and a collaborative spirit. What we offer: • Competitive salary plus participation in our Stock Option Plan, • Paid vacation with adjustments based on your location to comply with local labor laws, • Travel opportunities to our Vancouver and Boston offices, • Office perks: free breakfasts, lunches, snacks, and regular team events, • Freedom to influence the product and own key initiatives, • Collaboration with top‑tier engineers, researchers, and product experts in AI and robotics, • Startup culture prioritising speed, transparency, and minimal bureaucracy

NCG Field Engineer – London Based Location: London-based (Battersea HQ & customer sites) Schedule: 5 days per week M-F, 4 days in London,1 remote (admin day) with flexibility for occasional out-of-hours support. Travel: Willingness to travel across the UK and occasionally the EU for customer site visits. Salary: Competitive (DOE) About the Role We’re seeking a proactive, technically skilled, and customer-focused Field Engineer to support our London operations. You’ll be a key part of NCG’s service delivery team, working hands-on across customer environments to install, maintain, and troubleshoot network and connectivity infrastructure. This position is ideal for someone with experience in structured cabling and network equipment installation and who enjoys variety, independence, and direct customer interaction, while taking pride in delivering work to a high standard. Key Responsibilities · Install and maintain structured cabling systems (Cat6/Cat6a, fibre). This includes installation, termination, testing, fault finding, and cabinet dressing to NCG's quality and industry standards. · Act as on-site hands for remote engineers, providing physical support during customer incidents, hardware replacements, and network troubleshooting. · Respond to Priority 1 (P1) incidents across London, attending customer sites within SLA. · Collaborate with the Customer Service Operations Manager and internal engineering teams to align on daily priorities and ensure service quality. · Maintain accurate documentation, site notes, and asset records within internal systems. · Conduct regular stock audits and manage field equipment and consumables. You may be asked to assist a remote engineer by providing onsite support, including · Carrying out Wi‑Fi surveys and supporting the deployment and testing of access points (using tools such as Ekahau, NetSpot, or similar). · Supporting AV and meeting‑room installations, including physical setup and basic fault resolution. · Performing basic network and Wi‑Fi diagnostics (switches, access points, firewalls) and escalating issues to senior engineers when needed. What You'll Bring · Proven experience in a field-based IT, network, or cabling engineer role. · Strong working knowledge of structured cabling installations and best practices. · Basic understanding of networking fundamentals (LAN/WAN, IP addressing, VLANs, Wi-Fi). · Experience working with network equipment vendors such as Juniper, Meraki, UniFi, or Ruckus (desirable). · Excellent customer service and communication skills, with a calm and professional approach. · Strong organisation and time management, able to manage multiple customer sites and priorities. · Ability to work independently while maintaining clear communication with the wider team. · Flexible, solutions-focused attitude with a commitment to quality workmanship and service excellence. · Valid UK driving license (preferred). Why NCG? · Work with a fast-growing Managed Service Provider delivering enterprise-grade connectivity and network solutions. · Exposure to a wide range of technologies and vendors across dynamic customer environments. · Supportive team culture, with ongoing training and development opportunities. · Opportunities for career progression within network engineering or service operations.

Principal / Senior Java Engineer – Ultra Low Latency Trading Systems Location: London (Hybrid) The Opportunity A leading global quantitative trading firm is seeking an exceptional Java Engineer to join one of the highest-performing engineering teams in systematic trading. This firm operates at the forefront of low-latency technology, where software performance directly drives trading outcomes. The successful candidate will work on highly optimised, mission-critical trading infrastructure alongside elite engineers, researchers, and traders. This is a highly selective environment focused on technical excellence, ownership, and measurable impact. The Role You will design and build ultra-low latency, high-throughput trading systems responsible for processing market data and executing strategies across global markets. The role involves solving complex distributed systems challenges, optimising performance at the JVM and hardware level, and partnering closely with quantitative researchers to deliver production-grade trading platforms. Key Responsibilities • Design and develop high-performance Java trading infrastructure, • Build systems processing millions of events per second with deterministic latency requirements, • Optimise JVM behaviour, memory management, and concurrency models, • Identify and eliminate performance bottlenecks across CPU, network, and storage layers, • Collaborate directly with traders and researchers to implement and scale trading strategies, • Influence architectural decisions across critical trading platforms, • Maintain exceptional engineering standards across reliability, scalability, and code quality Required Experience Technical Expertise • Outstanding Java development experience in performance-critical environments, • Deep understanding of:, • JVM internals, • Multithreading and lock-free concurrency, • Garbage collection and memory optimisation, • Low-latency messaging and network programming, • Strong computer science fundamentals (algorithms, data structures, system design), • Proven experience building high-throughput distributed systems, • Strong performance profiling and optimisation experience, • Solid understanding of Linux-based production environments Highly Desirable • Experience within systematic trading, HFT, or market-making environments, • Background in other performance-sensitive industries (real-time gaming, telecoms, high-scale infrastructure, etc.), • Experience with C++ or other systems programming languages, • Familiarity with CPU architecture and hardware-aware optimisation, • Contributions to open-source or performance-focused projects, • Strong academic background in Computer Science, Mathematics, Physics, or related disciplines The Environment • Small, highly collaborative engineering teams, • Strong focus on technical autonomy and ownership, • Direct visibility of engineering impact on trading performance, • Low-bureaucracy, high-performance culture, • Access to cutting-edge trading infrastructure and research collaboration Compensation • Market-leading base salary, • Significant performance-based bonus potential, • Strong long-term earning opportunity, • Comprehensive benefits package

If you need support in completing the application or if you require a different format of this document, please get in touch with at or call TCS London Office number 02031552100 / +44 204 520 2575 with the subject line: “Application Support Request”. Careers at TCS: It means more TCS is a purpose-led transformation company, built on belief. We do not just help businesses to transform through technology. We support them in making a meaningful difference to the people and communities they serve - our clients include some of the biggest brands in the UK and worldwide. For you, it means more to make an impact that matters, through challenging projects which demand ambitious innovation and thought leadership. The Role Desktop Support Engineer (DSS) . Required Technical Skill Set : Install, Configure, Maintain and troubleshoot end user desktops, Laptops, Peripherals, Printers...etc. Your responsibilities: • Deskside Support will provide incident and request management support to all end user devices. E.g. Desktop, Laptop, Tablet, Thin-client, Mac, Monitor, Mobile device, VPN Token, Printers, Scanner, etc., • Incident handling: including troubleshooting, break fix; follows incident management process., • Service Requests: Installation, Movement, Addition or Change (IMAC) of new or existing end user device hardware/software component., • Software application support for applications both commercial off the shelf and customer developed., • Perform ICMS and PC sign off on every PC deployment and collection, • Assist in end user support or consultations., • Analyze completed end user device requests and incidents to identify and recommend process improvements and identify any process compliance issues., • Receive, diagnose, assess and resolve Deskside Incidents, • IMAC’s - Prepare new and existing equipment for deployment, • Move existing equipment (PC, notebook, Thin Client, network printer etc.…) and update configurations, as necessary., • Change an existing hardware/software component and verify functionality upon completion, • IMAC Update in CMDB, • Install and configure hardware/software as requested in the IMAC record and verify functionality upon completion (software which could not be installed by SCCM) Your Profile Essential skills/knowledge/experience: • Strong English proficiency and inter personal skills., • Provide incident and request management support to all end user devices. E.g. Desktop, Laptop, Tablet, Thin-client, Mac, Monitor, Mobile device, VPN Token, Printers, Scanner, etc, • Experience in Windows & non-Windows Operating environment, • Installation, Movement, Addition or Change (IMAC) of new or existing end user device hardware/software component., • Provide and maintain warranty/maintenance documentation for Assets, to be included in Operations Manual., • Install, organize, test, maintain, check and troubleshoot end user workstations and interrelated hardware and software., • Provide support to end users relating to hardware and software, computer applications, LAN components and peripherals., • Carry out on-site analysis, identification, and resolution of difficult desktop problems for end users., • Supervise complaint ticketing system and follow timely resolution of all work orders., • Able to configure and use Microsoft Enterprise applications (including SCCM and Active Directory)., • Creation/restoration of images and up gradation of patches using SCCM., • Ability to participate in the design, architect and engineering of software deployments/installation process., • Demonstrated ability to provide user support by means of remote access tools., • Ability to communicate effectively with both Business/Management and Vendor resources & acquire knowledge from them., • Knowledge on Asset management., • Preferred Certifications: MCSA (Win 7 Enterprise Desktop Support) & ITIL Foundation / Intermediate. Rewards & Benefits TCS is consistently voted a Top Employer in the UK and globally. Our competitive salary packages feature pension, health care, life assurance, laptop, phone, access to extensive training resources and discounts within the larger Tata network. We offer health & wellness initiatives and sports events; we are the proud sponsor of the London Marathon. Diversity, Inclusion and Wellbeing Tata Consultancy Services UK&I is committed to meeting the accessibility needs of all individuals in accordance with the UK Equality Act 2010 and the UK Human Rights Act 1998. We welcome and embrace diversity in race, nationality, ethnicity, disability, neurodiversity, gender identity, age, physical ability, gender reassignment, sexual orientation. We are a disability inclusive employer and encourage disabled people to apply for this role. As a Disability Confident Employer, we offer an interview to applicants with disabilities or long-term conditions who meet the minimum criteria for the role. Please email us at if you would like to opt in. If you are an applicant who needs any adjustments to the application process or interview, please contact us at with the subject line: “Adjustment Request” or call TCS London Office 02031552100 / +44 204 520 2575 to request an adjustment. We welcome requests prior to you completing the application and at any stage of the recruitment process.

What if the future of global data storage did not rely on vast, energy hungry data centres, but instead on light itself? Our client is building exactly that future. They are pioneering a fundamentally new approach to cold data storage using holographic technology that encodes information into advanced materials. This is not incremental innovation. It is a ground up reinvention of how data is stored, accessed, and preserved at scale. As the company moves from breakthrough research into deployable technology, they are now seeking an Advanced Embedded Engineer to play a critical role in turning deep science into working systems. This is a full time, onsite position based in Chiswick, London, working at the heart of a fast growing hardware startup. This role sits at the intersection of electronics, embedded software, mechanics, and experimental science. The Advanced Embedded Engineer will not be handed neatly packaged requirements or off the shelf solutions. Instead, they will be embedded directly within the company’s R&D environment, collaborating daily with physicists, materials scientists, and engineers to design and build bespoke internal systems that support novel optical and holographic processes. The work is hands on and deeply technical. One day might involve developing firmware to achieve precise, repeatable motion control. Another could involve integrating a new prototype rig, debugging a complex electromechanical issue, or refining control systems to push performance beyond existing limits. This is a role for someone who thrives on ambiguity, rapid iteration, and building things that have never existed before. At the core of this position is ownership. The Advanced Embedded Engineer will take responsibility for the design and development of precision electronic and electromechanical systems that enable accurate control across increasingly complex platforms. As prototypes evolve into more advanced systems, this individual will own the integration of rigs and subsystems, ensuring reliability, repeatability, and performance. They will be expected to diagnose and debug challenging issues across hardware, firmware, and control systems, often in a live lab environment. This includes working directly with microcontrollers such as ESP32, STM32, Teensy, or Raspberry Pi based systems, implementing and optimising communication protocols like I2C, SPI, and UART, and developing embedded software in C or C++ within a commercial context. The role also requires a strong electronics background. The engineer will design, build, and iterate on custom electronics using tools such as KiCad, EasyEDA, or Altium, and will be comfortable debugging both hardware and embedded software in a fast paced research setting. A working knowledge of Linux, particularly Debian based distributions, is important, as is experience interfacing with precision motors and encoders. Beyond execution, this role plays a key part in pushing the boundaries of the company’s holographic storage technology. Innovative thinking is not just encouraged but required. The successful candidate will help solve problems where no textbook answers exist, contributing directly to the delivery of disruptive, first of a kind products. We're looking for a pragmatic, curious embedded engineer with at least two years of experience in electronics, embedded systems, or mechatronics, ideally within a multidisciplinary R&D environment. A master’s degree in a relevant discipline is preferred, although strong bachelor’s graduates will also be considered. Experience in fast moving startups, research labs, or advanced engineering teams will be highly valued. Exposure to FPGA design, high speed serial interfaces, Python, or optics and photonics would be advantageous but not essential. In return, the company offers a competitive salary, 25 days annual leave, employer pension contributions, and a cycle to work scheme, alongside the opportunity to work on genuinely world changing technology. For engineers who want to be in the lab, close to the hardware, and at the forefront of sustainable data storage innovation, this is a rare opportunity to make a meaningful impact.

C++ Software Engineer – Low‑Latency Trading Contract - OUTSIDE IR35 Rate - Dependent on skills London - Hybrid working 50% in office. You'll be joining a high‑performance trading technology firm. Helping to building ultra‑low‑latency systems powering global electronic markets. Working alongside world‑class engineers solving complex challenges across C++, Linux, networking, and hardware‑accelerated trading pipelines. What You'll Do • Build and optimise high‑performance, low‑latency C++ applications, • Develop real‑time systems interacting directly with global exchanges, • Work closely with FPGA, network, and infrastructure teams, • Improve latency, throughput, and reliability across mission‑critical systems, • Exceptional modern C++ (C++17/20) development experience, • Strong Linux systems knowledge and debugging skills, • Experience in low‑latency, multithreaded or high‑performance environments, • Understanding of networking (TCP/UDP, kernel bypass, feed handlers), • Cutting‑edge technology environment, • Fast‑paced engineering‑driven culture 🔗 Click the link provided OR 📩 Email:

We have an exciting opportunity for skilled and motivated Broadcast Engineers, to join a fast-paced, live television broadcaster based in London. As a Broadcast Engineer, you will be responsible for ensuring uninterrupted broadcast operations by providing technical support, troubleshooting issues, and collaborating with cross-functional teams. You will support both on-site broadcast and remote technologies, contribute to project work, and maintain high standards of technical documentation and emergency response. Key Responsibilities • Respond to and resolve technical issues, ensuring minimal disruption to live broadcasts., • Provide on-site support for broadcast equipment, systems, and associated technologies, diagnosing and troubleshooting hardware and software issues in real-time., • Conduct routine and preventative maintenance to identify and address potential issues before they impact operations., • Support outside broadcasts and live events as required., • Collaborate with staff, stakeholders, and vendors to resolve technical and workflow challenges., • Maintain detailed records of support requests, solutions, and equipment configurations., • Contribute to the creation and updating of technical documentation., • Be available for on-call support during critical broadcasts or system failures, responding quickly to restore service., • Participate in research and project work to support technical innovation., • Uphold health and safety standards and promote equality and diversity values. What You Will Bring We are looking for candidates with at least some experience in broadcast or MCR (Master Control Room) engineering who are keen to further develop their technical skills within a dynamic media environment. Any exposure to live studio engineering and familiarity with a range of broadcast technologies would be ideal, including experience with graphics systems, cameras, vision and audio mixers, and NDI/IP networking. A good level of general IT skills is also important, as is the ability to quickly adapt to new systems and workflows. Additionally, a proactive approach to learning and an enthusiasm to taking on new challenges is essential. You will need to be comfortable working shifts, including early starts and late finishes, as well as weekend working. If you feel you have the skills and experience to be successful and you are fully eligible to work in the UK, then please apply now.

At TOPIC (in the Netherlands), we work every day on high-tech innovations to make the world smarter, healthier, and better. Are you a driven and ambitious Senior DevOps Engineer with a passion for automation, CI/CD, and state-of-the-art tooling that we are looking for? As a Senior DevOps Engineer, you play a key role in enabling development teams to work efficiently by delivering stable, scalable, and automated build and deployment environments. "Working at TOPIC gives you a flexible environment where there are amazing and challenging projects to keep on improving yourself" Tom Verhees I Software Engineer at TOPIC Embedded Systems What will you do as a Senior DevOps Engineer? As a Senior DevOps Engineer, you’ll boost our development process through smart automation and modern tooling. You’ll support development teams with stable, scalable CI/CD environments and help streamline workflows. Working in multidisciplinary teams, you’ll contribute to cutting-edge solutions while growing professionally and personally. Your responsibilities as a Senior DevOps Engineer: • Select, implement, and manage cutting-edge DevOps tools and self-service solutions, • Design, build, and maintain automated CI/CD pipelines, primarily using Docker/ Kubernetes, • Leverage cloud platforms such as AWS, Azure, or Google Cloud Platform (GCP) to design scalable, reliable, and efficient DevOps solutions, • Set up and optimize virtual infrastructure, including hardware integrations, (sub)system onboarding, and hardware migrations, • Manage containerized applications and microservices using Kubernetes, ensuring high availability, performance, and scalability, • Deliver end-to-end monitoring, logging, and data analytics solutions, • Write and maintain robust Python code for test automation (Robot Framework) and scripting, • Work closely with developers, testers, and other engineers to troubleshoot and resolve integration and deployment challenges. Be a sparring partner to your peers and stakeholders, • Document processes, configurations, and procedures to ensure clarity and maintainability What do we offer you? This will make you smarter: • Strategic projects in complex high-tech environments, • Collaborate with other senior engineers and domain experts, • Opportunities to mentor colleagues and shape DevOps practices, • Access to advanced training through our TOPIC Academy, • Contribute to and lead tech events and knowledge sessions This will make you better: • Permanent contract, • An all-in benefits package (€57,000 – €72,000 per year, including 13th month, mobility, pension, extra holidays), • 26 vacation days (option to buy extra), pension scheme, relocation support This will keep you healthy: • Good work-life balance, flexible hours, and hybrid working, • Inspiring office with daily fresh fruit and a gym, • Home office support for an inspiring work-from-home setup, • Regular fun, social, and sports events What do you bring as a Senior DevOps Engineer? • A Bachelor's or Master's degree in Computer Science, Embedded Systems, or a related technical field., • 5+ years of work experience as a Software Engineer in a high-tech domain or embedded systems environments., • At least 2 years of work experience as a DevOps & Automation Engineer., • Strong programming skills in Python, and proficient in C++ and/ or C#., • Solid experience in setting up and maintaining CI/CD pipelines and automated build environments., • Hands-on experience with containerization technologies, such as Docker and Kubernetes., • Practical knowledge of cloud platforms like AWS, Azure, or Google Cloud Platform (GCP)., • Familiarity with access and identity management systems (RBAC en IAM) and Agile way of working., • Experience with Infrastructure as Code (IaC) tools such as Terraform or Puppet., • You’re proactive, strategic, and solution-driven., • Motivation to continuously improve yourself and develop new skills., • A good command of English, and preferably Dutch language. Our organization Since 1996 we have been developing (embedded) systems that are essential for products manufactured by renowned high-tech companies around the world. Our projects involve edge to cloud solutions; from PCB design and FPGA to low level embedded software and application software for UI, Web, Mobile and cloud. We are well known for our high level of knowledge and expertise and are proud to be a Premier Embedded Computing Partner of AMD; technology leader in the field of System-on-Chips and FPGAs. Diversity & Inclusion At TOPIC, we believe that true innovation happens when people with different backgrounds, ideas, and perspectives come together. Every talent counts, and every voice matters. Diversity strengthens our creativity, and inclusion ensures that everyone feels welcome and valued. We build a culture where everyone has the space to contribute and be themselves.

Humanoid is the first AI and robotics company in the UK, creating the world’s most advanced, reliable, commercially scalable, and safe humanoid robots. Our first humanoid robot HMND 01 is a next-gen labour automation unit, providing highly efficient services across various use cases, starting with industrial applications. Our Mission At Humanoid we strive to create the world’s leading, commercially scalable, safe, and advanced humanoid robots that seamlessly integrate into daily life and amplify human capacity. Vision In a world where artificial intelligence opens up new horizons, our faith in its potential unveils a new outlook where, together, humans and machines build a new future filled with knowledge, inspiration, and incredible discoveries. The development of a functional humanoid robot underpins an era of abundance and well-being where poverty will disappear, and people will be able to choose what they want to do. We believe that providing a universal basic income will eventually be a true evolution of our civilization. Solution As the demands on our built environment rise, labour shortages loom. With the world’s workforce increasingly moving away from undesirable tasks, the manufacturing, construction, and logistics industries critical to our daily lives are left exposed. By deploying our general-purpose humanoid robots in environments deemed hazardous or monotonous, we envision a future where human well-being is safeguarded while closing the gaps in critical global labour needs. About The Role We are looking for a Robotics Test Automation Engineer to ensure that our robots move, think, and interact with the world safely and reliably. You will own the quality gate for our software releases and lead the validation of new hardware revisions.This is not a standard web-QA role; you will be working directly with Hardware-in-the-Loop (HIL) systems and whole robots, designing automated test benches, and testing regression in complex electromechanical systems. You will play a critical role in decoupling software development from hardware dependencies. What You’ll Do • Software Release Testing, • Release Validation: orchestrate the end-to-end testing pipeline for new software versions, ensuring every release meets safety and performance standards before deploying to the fleet., • CI/CD Integration: Integrate automated tests into our CI/CD pipeline (e.g., Jenkins, GitLab CI, GitHub Actions) to catch regressions immediately after code merges., • Simulation vs. Reality: Expand testing coverage in our simulation environments (e.g., Gazebo, Webots, Isaac Sim) to parallelize software testing before physical validation., • Hardware-in-the-Loop (HIL) & Hardware Revisions, • HIL Framework Design: Build and maintain HIL test benches that simulate real-world inputs (sensor data, motor feedback) to validate control logic on actual target hardware., • New Hardware Bring-up: Collaborate with Electrical and Mechanical Engineering teams to validate new hardware revisions (PCBs, sensors, actuators). You will write the test suites that verify if the new hardware plays nicely with the existing software stack., • Latency & Performance: Measure real-time performance, ensuring that software changes do not introduce dangerous latency in control loops., • Tooling & Infrastructure, • Develop Python/C++/Shell scripts to automate the flashing of firmware and configuration of robot parameters., • Manage test data logs and reports, creating automated dashboards that highlight pass/fail rates and performance trends over time We’re Looking For • Experience: 3+ years in software test automation, with at least 1 year specifically in Robotics, Embedded Systems, or Automotive., • Coding: Strong proficiency in Python (for scripting/testing) and familiarity with C++ (reading production code)., • Robotics Middleware: Hands-on experience with ROS2. You understand nodes, topics, services, and actions., • HIL Experience: Experience building or maintaining Hardware-in-the-Loop systems. You understand how to mock sensor data and interact with hardware interfaces (EtherCAT, Ethernet, I2C, CAN)., • OS: Deep comfort with Linux (Ubuntu) environments., • Nice-to-Have:, • Experience with robotics simulators (Gazebo, Unity, NVIDIA Isaac Sim)., • Knowledge of containerization (Docker) for consistent test environments., • Basic electrical debugging skills (using a multimeter/oscilloscope to verify hardware triggers)., • Experience with safety-critical standards (IEC 61508, ISO 26262). Languages: Python, C++, Bash scripts, • Robotics: ROS / ROS2, • CI/CD: [e.g., Jenkins, GitLab, GitHub Actions], • Hardware Interfaces: CAN bus, Serial, EtherCAT, • Simulation: [e.g., Unity, Ignition, Isaak] What We Offer • Competitive salary plus participation in our Stock Option Plan, • Paid vacation with adjustments based on your location to comply with local labor laws, • Travel opportunities to our Vancouver and Boston offices, • Office perks: free breakfasts, lunches, snacks, and regular team events, • Freedom to influence the product and own key initiatives, • Collaboration with top‑tier engineers, researchers, and product experts in AI and robotics, • Startup culture prioritising speed, transparency, and minimal bureaucracy How to Apply Does this role sound like the perfect fit for you? Fill in the form and include links or files that showcase the best of what you’ve built and achieved.

Who We Are: Cingularity is a highly specialised global fibre network provider enabling the transmission of premium live broadcast TV. Our obsession with quality, performance, and network resilience has allowed us to deliver services for companies including Amazon Prime, Warner Bros. Discovery and ATP Media, where we are trusted to carry the live TV signals destined for their global TV audiences. IMG Media acquired Cingularity in September 2022 to provide the expertise to guide IMG’s remote production evolution toward a hybrid model of fibre, satellite, cloud and IP. IMG is a leading global sports marketing agency, specializing in media rights management and sales, multi-channel content production and distribution, brand partnerships, strategic consulting, digital services, and events management. It powers growth of revenues, fanbases and IP for more than 200 federations, associations, events, and teams, including the National Football League, English Premier League, International Olympic Committee, National Hockey League, Major League Soccer, ATP and WTA Tours, the AELTC (Wimbledon), Euroleague Basketball, CONMEBOL, DP World Tour, and The R&A, as well as UFC, WWE, and PBR. IMG is a subsidiary of TKO Group Holdings, Inc. (NYSE: TKO), a premium sports and entertainment company. TKO Group Holdings, Inc. (NYSE: TKO) is a premium sports and entertainment company. TKO owns iconic properties including UFC, the world’s premier mixed martial arts organization; WWE, the global leader in sports entertainment; and PBR, the world’s premier bull riding organization. Together, these properties reach 1 billion households across 210 countries and territories and organize more than 500 live events year-round, attracting more than three million fans. TKO also services and partners with major sports rights holders through IMG, an industry-leading global sports marketing agency; and On Location, a global leader in premium experiential hospitality. Working Conditions: Permanent, London, Spitalfields, London, United Kingdom Hybrid Mon-Fri, 9am-5pm What You'll Do: The Senior Network Engineer (NetOps) at Cingularity is a pivotal role demanding technical expertise and innovative thinking. As a core member of our engineering team, you will be responsible for designing, building, and maintaining the complex infrastructure that powers our mission-critical transmission systems. This position is designed for an engineer who can bridge the gap between traditional networking methodologies and modern NetOps practices. You will take ownership of our core networking infrastructure—including a specialised DTM (Dynamic Synchronous Transfer Mode) network—while strategically introducing automation to enhance resilience and performance. While you will assist with the development of observability tools, 24/7 monitoring is managed by our Technical Operations Centre (TOC), supported by a joint effort between Systems, Broadcast, and Network Engineering teams. Global Telemetry & Network Management • Core Routing & Switching: Design and operate distributed systems with an advanced understanding of OSPF and BGP., • Multicast Routing: Maintain a solid understanding of Multicast routing to ensure efficient data delivery across broadcast environments., • DTM Specialisation: Take primary responsibility for the management and optimisation of the DTM network, ensuring it meets the rigorous demands of live broadcast., • Global Telemetry: Manage and refine a global telemetry network to ensure consistent data flow and visibility across all international transmission points., • Capacity Planning: Manage network capacity and advise on hardware/bandwidth upgrades triggered by business growth and specific customer projects., • Infrastructure Security: Take ownership of network security, implementing best practices for access control and protection across the entire ecosystem., • Firmware & Lifecycle Management: Manage and execute regular firmware upgrades, patching, and maintenance across all network hardware to ensure stability and mitigate vulnerabilities., • Internal Tooling: Build and refine monitoring techniques where the primary "customers" are our internal TOC and Event Engineering teams., • Observability Design: Utilise and assist in the development of modern monitoring and logging systems (e.g., Prometheus, Grafana, ELK/OpenSearch) and the Netbox source of truth., • Automation Development: Implement automation strategies for infrastructure management using tools such as Ansible, Python, and shell scripting., • Level 3 Troubleshooting: Proactively monitor performance and serve as a level 3 escalation point for complex networking issues, • Team Guidance: Mentor and collaborate with technology teams on engineering projects and the resolution of high-level technical issues., • Training: Assist engineers in learning networking concepts and the specific architecture of the Cingularity network., • Project Delivery: Lead technical network projects from concept to deployment, meeting schedules and budget constraints. You Have These: Required • Networking Expertise: Advanced knowledge of the TCP/IP Stack, including switching and routing protocols (OSPF, BGP)., • Network Security: Proven experience in securing network infrastructure and managing hardware firmware lifecycles., • Multicast Routing: Practical experience with Multicast protocols in a production environment., • Automation: Demonstrable experience using Python and Ansible for automation, scripting, and integration., • IPAM/DCIM: Experience using Netbox for infrastructure documentation and management., • Monitoring: Practical experience with modern observability tools like Grafana, ELK, and InfluxDB. Advantageous • Advanced Broadcast Standards: Knowledge of SMPTE ST 2110 networks and related timing/synchronisation requirements., • Legacy & Specialised Transport: Direct experience with DTM (Dynamic Synchronous Transfer Mode) or ATM technologies., • Version Control: Experience using GitHub for managing automation scripts and configuration., • Broadcast Protocols: Understanding of real-time transport protocols (RTP, UDP, SRT, Zixi) and video encoding (AVC, HEVC, JPEG-XS)., • Project Management: Experience with tools such as ClickUp, Monday.com, or Jira. Soft Skills • Communication: The ability to clearly articulate complex technical concepts to both technical and non-technical stakeholders., • Focus Under Pressure: The ability to remain focused under pressure and maintain the highest standards of accuracy in a live environment., • Proactive Mindset: An organised and self-motivated individual who proactively seeks innovative solutions. TKO EEO Statement: TKO is an Equal Opportunity Employer and complies with all applicable federal, state, and local laws regarding non-discrimination in employment. TKO makes employment decisions based on merit and qualifications, without considering an employee’s or applicant’s race, color, religion, sex, sexual orientation, gender identity or expression, national origin, age, disability, marital status, veteran status, or any other basis prohibited under federal, state or local laws governing non-discrimination in employment in every location in which the Company has facilities. TKO also provides reasonable accommodations for qualified individuals with disabilities in accordance with the Americans with Disabilities Act (ADA) and applicable state or local laws. For information about Privacy and Information Security for TKO employment candidates, please review our ___. For information regarding Terms of Use for this and other TKO websites, please review our ___