Trabajos hydraulic en RotherhamCrear alertas

Adept resourcing are supporting a precision manufacturer with the recruitment of a Multiskilled Maintenance Engineer. The Maintenance Engineer performs machine maintenance and basic facility repairs according to safety regulations and processes to support the achievement of the site's business goals and objectives. Role: • Provide emergency/unscheduled repairs of production equipment as required., • Perform highly diversified duties to install and maintain the site's equipment., • Perform work including, but not limited to, mechanical, electrical, pneumatic, hydraulic, across a range of production machines., • Troubleshoot and diagnose problems, replace or repair parts, test and make adjustments., • Perform preventative maintenance on all machines, equipment, and plant facility., • Carry out installation tasks including electrical, water and air supplies., • Use a variety of hand and power tools, electric meters and material handling equipment in performing duties., • Comply with all relevant health and safety rules and regulations., • Given that roles within maintenance necessitate working in a variety of environments, you must be able to demonstrate a robust understanding of the Health and Safety perimeters across the site and mindfulness of how safety requirements vary by department., • Able to hit the ground running and get stuck in, • Comfortable working in a forging environment and equipment., • They need experience from within a maintenance background, ideally with a variety of equipment., • They can demonstrate practical experience (at interview they may for example be asked to explain what a drawing is showing or how they would approach a task) Education and experience: • Apprenticeship (preferred), • Fabrication experience is preferable., • Proven hydraulic, mechanical, pneumatic industrial experience (Required)., • Recognised Electrical training/ experience., • Fault finding across a variety of control systems., • Reading and interpreting drawings. Please apply for immediate consideration.

Penguin Recruitment is operating as a Recruitment Agency for this position.

Electrical role: Electrical qualification with mechanical experience. Good knowledge of mechanical, electrical, hydraulic, and pneumatic systems. Positions Available: 1 x Mechanical Technician and 1 x Electrical Technician.

Senior Hydraulic ModellerUK Flexible LocationSalary: £50,000 - £60,000 Are you a Senior Hydraulic Modeller ready for a role where your technical input helps shape better wastewater and surface water solutions? This Senior Hydraulic Modeller opportunity is with a leading consultancy known for strong technical standards, flexible working and a supportive team culture. The Senior Hydraulic Modeller will join a respected water team delivering projects across the UK, with work covering wastewater networks, integrated catchment modelling and surface water systems. For a Senior Hydraulic Modeller seeking varied schemes and genuine responsibility, this is a strong career move. Key responsibilities* Deliver wastewater and surface water modelling projects from start to finish* Build, verify and audit ICM or InfoWorks models in 1D and 2D* Interpret outputs and develop practical, cost-effective solutions* Plan surveys and coordinate data collection activities* Prepare technical reports and client updates* Manage project budgets, resources and programme delivery* Mentor junior engineers and modellers* Maintain quality and health and safety standards Candidate requirements* Degree in Civil Engineering, Environmental Science or similar* At least 6 years of wastewater hydraulic modelling experience* Advanced knowledge of ICM or InfoWorks* Experience supervising and reviewing technical work* Strong communication and client-facing skills The Senior Hydraulic Modeller role offers hybrid flexibility, national project exposure, strong progression potential and a salary of £50,000 - £60,000 plus excellent benefits. This Senior Hydraulic Modeller position will suit someone ready to lead and influence project outcomes. Eligibility to Apply Applicants must already have the right to work in the UK. Sponsorship is not available. Penguin Recruitment is operating as a Recruitment Agency for this position. For more information, contact Andy Hopkins, our Civil Engineering specialist with over 30 years' recruitment experience.

Company description: Water Utility Company based in Yorkshire region of England. Job description: Discoloration Engineer (Network Engineering Team) Hello! Thanks for stopping by. Let us tell you about all the great reasons to join us here at Yorkshire Water: We offer a competitive salary, depending on experience £40,167 - £53,309 A company car through company car lease scheme Annual incentive related bonus (£1000 maximum bonus opportunity for the performance year) Attractive pension scheme (up to 12% company contribution) Development opportunities in line with the Discoloration Engineer progression plan 25 days annual leave plus bank holidays plus an extra wellness day! Life assurance cover of 4 times pensionable salary A great benefits package choose from health cash plan scheme, critical illness insurance, dental insurance, life assurance flex and partner cover. Retail savings scheme Online GP service, cycle to work scheme, gym membership discounts and many more! Location: Smithywood Office, Sheffield & Working from Home Work type: Permanent. 37 hours per week, Monday Friday. We have an exciting opportunity for a Discoloration Engineer to join the Network Engineering team at Yorkshire Water and be a part of helping Yorkshire Water to provide the best service to our customers. Could this be you? What we do: Everyone has an idea of what a water company does. Here in Yorkshire, we make sure that over 5.4 million people living in the region and the millions of people who visit our region each year, can rely on our services, and have clean and safe drinking water on tap and that their wastewater is taken away. But for us, its so much more than this. We look after communities, protect the environment, and plan to look after Yorkshires water, today, tomorrow 24/7, 365 days a year. We provide essential water and wastewater services to every corner of the Yorkshire region, and play a key role in the regions health, wellbeing, and prosperity. New environmental legislation, unprecedented levels of investment and changing expectations from customers means that this is an exciting time to discover opportunities within the water industry. Network Engineering team are a key part of how we plan to meet the changing expectations of customers and regulators. We currently have a vacancy for a newly created Discoloration Engineer role within the Network Engineering Team, part of the wider Network Planning and Engineering department in the Clean Water Services Delivery Business Unit. This role will be based in the South & West Network Engineering team but will cover the entire Yorkshire area, working alongside our Senior Discoloration Engineer and other Discoloration Engineers. The primary responsibilities include providing proficient and effective Discoloration Engineering capabilities within Network Services (Water) to support and enhance specialist initiatives aimed at managing and reducing discolouration events and contacts. The role involves applying engineering analysis, tools, bespoke software modelling, and innovation to deliver economic OPEX and CAPEX solutions. Additionally, the Discoloration Engineer will undertake the development of colleagues, manage local workload distribution, and act as the business discoloration specialist based on expertise. Key tasks include identifying and producing company risk profiles for business reporting, providing expert analysis and risk promotion based on data from routine maintenance activities, and defining primary factors from reportable and near-miss events to drive initiatives for water quality contact reduction. The role also involves providing specialist support for DWI queries and enforcement, as well as delivering plans to mitigate regional trunk main discoloration risks. Where you fit in: As our Discoloration Engineer you will Support the production of detailed intervention plans and documents like WAND, RAMS, and contingency plans to minimize discolouration and supply interruptions from high-risk assets. Use manual calculations or hydraulic analytical tools to determine the impact of interventions on hydraulic and water quality, producing detailed operational method statements and contingency plans. Provide technical support and advice during discolouration incidents, developing mitigation options and reacting to emerging incidents professionally under pressure. Undertake detailed investigations and reports for DWI reportable incidents, water quality contact performance, and develop DWI Drinking Water Safety Plans. Have a strong understanding of water quality issues caused by incorrect operation of assets and asset conditions, including mechanisms leading to bacteriological, iron, manganese, and discolouration failures. Investigate at a WSS level, create work packs for maintenance technicians, and devise maintenance activities to condition distribution mains, promoting automation where necessary. Own and provide monthly DOMS risk matrices, participate in DG3 Criticality/Resilience studies, and ensure risks are managed through Yorkshire Waters risk management systems. Provide discoloration engineering support and coaching to colleagues, ensuring accurate recording of asset failure risks and promoting the use of quality management systems. What skills & qualifications you will need: Demonstrate proven analytical skills. Detailed knowledge of the design and operation principles of potable water distribution network assets. Excellent data analysis and manipulation skills. Excellent report writing and communication skills. Strong awareness of health and safety practices. Demonstration of knowledge and application of company vision, values, and SBOs. Confident at presenting. Full Valid UK Driving Licence is Preferred, but not essential. Ability to focus on specific activities while understanding the wider impact on service delivery to all customers. Although we operate 24 hours a day, 365 days a year, its important to us that we support flexible working patterns and job share options (when we can), to help you make the best of both your work and home life. We know that juggling childcare responsibilities or getting that ideal work/life balance isnt always easy! Do we sound like your cup of tea? If youve got experience in Discoloration Engineer and want to help us deliver great service for our customers whilst looking after the environment, then be sure to apply today to find out what a career with Yorkshire Water can offer you. Closing date 1st May If successful for the role, you will be required to undergo pre-employment checks that will include a Basic Disclosure Check, carried out through a Third-Party Company, prior to commencing employment. Depending on the role, you may also be required to go through the security vetting process for either a Counter Terrorist Check or Security Check clearance. All our roles are subject to a medical questionnaire, and further medicals when required. We are committed to removing barriers and ensuring our recruitment process is accessible to everyone. We offer a range of adjustments to make your application experience as comfortable and straightforward as possible. If you have an accessibility need, disability, or condition that requires changes to the recruitment process, please include this information in your application. We will then discuss any reasonable adjustments required. Kelda Group reserve the right to close this position before the published closing date, should the need occur. We therefore advise that you complete and submit your application as soon as possible. TPBN1_UKTJ

Join Our Team as an HGV/PSV Mechanic Are you an experienced and skilled HGV/PSV mechanic with a passion for working on large vehicles? Do you want to be part of a dynamic team that values expertise and dedication? We’re looking for talented individuals like you to join us. At WJF Technical Support, we pride ourselves on delivering excellent service to our clients while providing a work environment where employees can grow, develop their skills, and enjoy a fulfilling career. Why Work with Us? • Competitive Salary, • Career Growth Opportunities, • Contract & Permanent positions, • Weekly pay, • Experienced Recruitment Team Key Responsibilities: • Perform routine maintenance and repair on a variety of HGVs, including trucks, trailers, and other commercial vehicles., • Diagnose mechanical, electrical, and hydraulic issues and provide solutions in a timely manner., • Carry out inspections and MOT preparations to ensure vehicles meet regulatory standards., • Maintain accurate records of repairs and services performed., • Assist with vehicle breakdowns and emergencies as needed. Requirements: • Proven experience as an HGV/PSV mechanic or a similar role., • NVQ Level 3 in Vehicle Maintenance and Repair (or equivalent qualification)., • Knowledge of vehicle diagnostics and repair techniques., • Ability to work independently and as part of a team., • Strong problem-solving skills and attention to detail., • Valid HGV/PSV licence is a plus., • Must be a UK resident and be eligible to work in the UK. What We’re Looking For • A passion for working with large vehicles and heavy machinery., • Strong technical and mechanical knowledge with the ability to work under pressure., • A professional approach with great communication and customer service skills., • The ability to work both independently and as part of a team., • A commitment to maintaining the highest safety standards. How to Apply: Ready to take your career to the next level? Here’s how to apply: • Browse our ___ and select the role that suits your experience and qualifications. Submit your CV and our Recruitment Team will then review your application and get in touch to discuss the next steps., • We have positions available across the UK for contract and permanent roles in the truck, bus and waste sectors., • Please note that you must be a UK resident and be eligible to work in the UK. About Us: WJF Technical Support is a leading provider of experienced mechanics into the transport sector. We have built a reputation for delivering high-quality services to our clients, and our skilled team plays a vital role in our success. If you’re passionate about HGV, RCV and PSV maintenance and repair, WJF Technical Support is the place for you to grow your career while making an impact.

Commissioning Engineer - Remote (UK-Based) - Global Travel Required Are you an experienced Commissioning Engineer ready to take on a global challenge? We are looking for a motivated and technically skilled individual to join our dynamic team, delivering world-class process engineering projects across EMEA, APAC, and beyond primarily in the food & beverage industry. What You’ll Do: Depending on project needs, you may be deployed as a Process Commissioning Engineer, Commissioning Team Leader: • Lead Installation and Operational Qualification (IQ/OQ) activities on client sites worldwide, • Commission and start up process plants, including utilities, MCC panels, instrumentation, and control systems, • Troubleshoot mechanical, hydraulic, thermal, and electrical issues on-site, • Manage and coordinate commissioning teams and contractors across complex, multi-disciplinary projects, • Deliver customer training and support first production runs, • Produce detailed commissioning reports and weekly project updates, • Ensure strict compliance with health, safety, and contractual requirements on every site What We’re Looking For • Degree-level qualification in Engineering, Food Technology, or Dairy Technology (or equivalent), • Minimum 4 years’ experience in Process Engineering or Commissioning roles, • Strong technical skills across mechanical, electrical, and instrumentation disciplines, • Excellent communication skills in English (spoken and written), • Confident working autonomously on international sites and managing stakeholder relationships, • Full willingness to travel globally — role requires approximately 80% travel Working Pattern: Remote-based in the UK with approximately 80% global travel. You’ll work across EMEA and APAC regions, spending extended periods on client sites as projects demand.

Service / Commissioning Engineer UK Based - Extensive Travel (UK, Europe & Overseas) £60,000 (including OT + Travel) + Company Car Flexible working with regular travel & time away Our client is a well-established engineering manufacturer supplying specialist industrial equipment worldwide. They are looking to strengthen their service team with an experienced Service / Commissioning Engineer to support installations, commissioning and aftersales service at customer sites. This role will involve regular European travel and require the ability to travel without European restrictions Responsibilities - Service / Commissioning Engineer • Commission industrial equipment at customer sites in the UK, Europe and overseas, • Carry out extended commissioning projects depending on plant size, • Take full responsibility for on-site Health & Safety during service and commissioning, • Liaise closely with customers, contractors and site engineers to ensure successful project delivery, • Deliver operator and maintenance training to customers, • Attend emergency breakdowns and planned service visits, • Diagnose faults and ensure correct tools and spares are available, • Build strong working relationships with customers at all levels, • Produce clear written and verbal reports on progress and technical issues, • Work independently, managing workload and priorities effectively, • Participate in out-of-hours service support when required Qualification / Experience - Service / Commissioning Engineer • Electrical engineering qualification (ONC/HNC, City & Guilds or equivalent), • Hands-on electrical engineering experience within an industrial environment, • Broad engineering knowledge including mechanical and hydraulic systems, • Strong fault-finding and problem-solving ability, • Good understanding of Health & Safety legislation, • Comfortable working in potentially hazardous environments, • Willingness to travel and work away from home, • Previous international or overseas work experience advantageous Benefits - Service / Commissioning Engineer • Competitive basic salary with strong earning potential, • Company pension contribution, • Life insurance, • 33 days holiday including bank holidays, increasing with service, • Fully expensed company car or van, • Tools provided, • Company credit card For more information on this role, please contact Andy Haddon on 01453 796617, or send a copy of your CV to For details of other opportunities available within your chosen field, please visit ___ Omega is an employment agency specialising in opportunities at all levels within the Engineering, Manufacturing, Aerospace, Automotive, Electronics, Defence, Scientific, Energy & Renewables and Tech sectors. Ideal background / Previous roles may include: field service engineer, service technician, maintenance engineer, shift engineer, maintenance technician, shift technician or electrical engineer.

On behalf of a UK client, we are looking for a Second Engineer. Applicants must hold a UK passport or UK work permit. Role Overview: The Second Engineer is responsible for supporting the Chief Engineer in the safe, efficient operation and maintenance of all vessel machinery and technical systems. This includes propulsion, power generation, hydraulic jack-up systems, and mission-critical equipment used in offshore windfarm maintenance operations. Key Responsibilities • Assist the Chief Engineer with the daily operation and maintenance of all engine room and technical systems, • Take delegated responsibility for machinery spaces, including periods as the senior engineer on watch Operational Duties: Oversee maintenance and repair of: • Main engines and auxiliary engines, • Generators and electrical distribution systems, • Hydraulic systems, including jack-up legs and lifting equipment, • HVAC and hotel services systems, • Ensure planned maintenance system (PMS) is followed and records are accurately maintained, • Supervise and mentor junior engineering crew, • Monitor fuel, lube oil, and consumables usage and maintain adequate stock levels, • Ensure compliance with UK maritime regulations, class requirements, and company procedures, • Support safe and efficient jack-up and jacking operations, • Participate in fault-finding, troubleshooting, and emergency response, • Maintain high standards of housekeeping and safety in engine spaces, • Assist with audits, inspections, and client visits Qualifications & Requirements: Certifications: • STCW III/2 – Second Engineer Officer (Unlimited or Limited depending on vessel class), • Valid STCW basic safety training certificates, • ENG1 (or equivalent) medical certificate, • Designated Security Duties (DSD) certification, • Relevant UK work eligibility, • DP Maintenance and High Voltage Experience: • Proven experience as a Second Engineer, • Previous offshore experience jack-up vessels, • Experience with:, • Diesel-electric propulsion systems, • High-voltage systems (desirable), • Hydraulic and jacking systems (highly desirable), • Familiarity with DP vessels, • Must hold a UK passport or a UK work Permit Skills & Competencies: • Strong technical and mechanical troubleshooting skills, • Good leadership and team management abilities, • High level of safety awareness and compliance, • Ability to work under pressure in offshore conditions, • Effective communication and reporting skills, • Proactive and hands-on approach Key Attributes: • Safety-focused mindset, • Reliable and adaptable, • Team-oriented with a positive attitude, • Strong attention to detail Additional Information: Vessel: Jack-Up Windfarm Maintenance Vessel Location: UK Waters (must hold a British Passport or hold a UK work Permit) Reports To: Chief Engineer Typical rotations: 6 weeks on/off

Job Title: Flood Risk & Drainage Lead Location: Hybrid Working / Based from any of our UK Offices (Manchester, Liverpool or Glasgow Preferred) Salary: Competitive Job Type: Full Time, Permanent About us: We are a team of enthusiastic and collaborative planners, designers, environmental consultants, engineers and health & safety professionals. Our client base includes public and private sectors. We have grown significantly over the last few years and now employ 200 individuals across the UK. Teamwork and a people-first culture are at the heart of everything we do and we wish to engage an enthusiastic professional to join our team. Please note that the company does not offer sponsorship and therefore candidates must have the legal right to live and work in the UK to be considered for this role. About The Role: Arthian is seeking a commercially driven Flood Risk & Drainage Lead to lead and grow our Water Environment team. This is not a pure delivery role. We are looking for someone who can combine strong technical oversight with business development, client ownership and team leadership. The successful candidate will help shape the direction of the service line, strengthen technical capability and grow fee income. You will take ownership of projects, clients and team performance while driving commercial growth across a varied portfolio of sectors and clients. You will lead and oversee delivery across the water environment discipline, including Flood Risk Assessments, drainage strategies and designs, hydraulic modelling and specialist assessments. Our Work: Our water environment team delivers a wide range of work across flood risk, drainage and hydraulic modelling, supporting planning and delivery for energy, infrastructure, industrial, residential and commercial projects. The work is varied, client-facing and often fast moving, with a mix of strategic advisory, modelling and design-led delivery. You will: • Lead and oversee delivery across the water environment discipline, including Flood Risk Assessments, drainage strategies and designs, hydraulic modelling and specialist assessments, • Manage technically complex projects, including surface water and fluvial assessments, drainage network modelling, detention and storage design, and fire water and containment assessments where required, • Act as technical sign-off and quality lead on flood risk, drainage and modelling outputs, • Build and manage client relationships across a varied client base (developers, operators, landowners, contractors, consultants and public sector bodies), developing repeat work and new opportunities, • Lead fee proposals, tenders and scope definition, including advising clients on proportionate scope and risk, • Support and lead business development activity, including pipeline development and conversion, • Line manage and mentor junior consultants, delegating effectively and maintaining standards, • Own project financial performance, including budgets, fee forecasting, WIP management and invoicing Commercial mindset: • Evidence of winning work, leading proposals or owning client accounts, • Confident scoping work, agreeing fees and advising clients on proportionate scope and risk, • Experience line managing, mentoring or leading a team, • Strong QA instincts and ability to enforce standards, • Strong understanding of UK flood risk policy, guidance and planning requirements, • Experience producing and reviewing FRA and drainage submissions, • Working knowledge of SuDS principles, hydraulic design and hydraulic modelling, • Experience delivering water environment work across a range of sectors and clients, • Planning-led development experience is valuable, but not essential if you can demonstrate strong technical oversight and commercial performance across other sectors, • Commercially aware, proactive and growth minded, • Comfortable operating in an agile consultancy environment with high ownership and accountability Competitive salary and attractive benefits package is offered, including: • 33 days holiday, • Hybrid and flexible working, • Salary sacrifice schemes (EV, Cycle to Work, Holiday Purchase), • Health cash plan, • Please click on the APPLY button to send your CV and Cover Letter for this role., • Please summarise what you can bring to the role and your salary expectation. JBRP1_UKTJ

Job Description To be considered for an interview, please make sure your application is full in line with the job specs as found below. Hydraulic Modeller Sheffield / Exeter Permanent full-time(37.5hours) Competitive salary plus benefits Come and join a business where you will have the opportunity to grow a team in an environment where success relies on nurturing a motivated and enthusiastic workforce, and employee contribution is valued and rewarded. To support the delivery of predominantly wastewater and integrated hydraulic modelling projects. The role will include: • Planning and supervising various surveys, • Managing site visits - walkovers, investigations, observing survey contractors, • Building hydraulic models, • Verification of hydraulic models, • Introduction to project scoping, • Introduction to modelling solutions, • Analysing results using a variety of software packages including excel and, • Generating plans using Mapinfo., • Report writing,, • Engaging with clients either on the phone and or via email or via attendance at meetings with more senior members of staff, • Supervising and checking the work of graduate/ assistant modellers., • Preparation of risk assessments, • Assist in the development of in house training modules Qualifications, • Relevant degree or other qualification supplemented by appropriate experience, • 3 years practical experience in the wastewater hydraulic modelling field, • 2-3 years ICM 1D experience with some 2D experience, • Member of appropriate professional body.What can we offer you?, • Flexible working, • A clear and structured career and CPD progression route with support to gain CIWEM Chartership, • A workplace culture that encourages team building, social activities and charitable events, • Bright open plan offices - in the heart of Sheffield and on the edge of Exeter - both giving access to good transport links, to local amenities and lunchtime walking routes., • Company benefits: 25 days holiday plus Bank Holidays, Westfield Health Scheme, Death in Service cover, & Contributary Pension Scheme.

Job Description Ensure you read the information regarding this opportunity thoroughly before making an application. Principal Hydraulic Modeller Sheffield / Exeter Permanent full-time(37.5hours) Competitive salary plus benefits Come and join a business where you will have the opportunity to grow a team in an environment where success relies on nurturing a motivated and enthusiastic workforce, and employee contribution is valued and rewarded. The role will Include: • Develop, calibrate, validate, maintain, and utilize models for root cause analysis, understanding system operation and performance, communicating risk, and supporting business needs., • Provide technical training, coaching, and mentoring for team members, demonstrating technical leadership and driving technical improvements within the team., • Prioritize health and safety in the delivery process and practices., • Proactively manage stakeholders and foster excellent internal networks across the organization., • Ensure the delivery of quality modeling outputs and instill confidence in the results. • Develop Total Expenditure (TOTEX) solutions to enhance outcomes., • Use modeling results to aid stakeholders in decision-making and recommend modeling approaches to support design teams., • Continuously challenge and seek opportunities to improve the technical quality and confidence of modeling outputs., • Support the development and adherence to modeling specifications., • Foster innovation and a culture of continuous improvement.Qualifications, • Demonstrated experience in technical training, coaching, and mentoring., • Proven ability to streamline processes for efficiency., • Degree level education or equivalent experience., • Substantial experience in the relevant field, ideally with a relevant professional qualification or Chartership., • Proficiency in data interrogation using Microsoft Excel, including Visual Basic programming., • Strong attention to detail, verbal, and written communication skills., • Effective presentation skills., • Valid driving license.Capability:, • Proficiency in software such as InfoWorks ICM, Risk Master, InfoAsset Manager, MapInfo, and ArcGIS., • Demonstrated experience in model development, verification, river modeling, water quality modeling, and solution development., • Excellent understanding of hydraulics and water quality standards., • Practical understanding of option buildability.What can we offer you?, • Flexible working, • A clear and structured career and CPD progression route with support to gain CIWEM Chartership, • A workplace culture that encourages team building, social activities and charitable events, • Bright open plan offices - in the heart of Sheffield and on the edge of Exeter - both giving access to good transport links, to local amenities and lunchtime walking routes., • Company benefits: 25 days holiday plus Bank Holidays, Westfield Health Scheme, Death in Service cover, & Contributary Pension Scheme.

Civil Project Engineer Sheffield Salary: £38,000 - £48,000 Are you a Civil Project Engineer ready to take the next step with a role that offers project variety, technical ownership and clear progression? This Civil Project Engineer opportunity is with a leading consultancy in Sheffield that is continuing to grow and invest in its people. The Civil Project Engineer will join a supportive multi-office civil engineering team delivering highways, drainage and development infrastructure projects across the UK. For a Civil Project Engineer who enjoys hands-on design, coordination and career progression, this is an excellent opportunity within a collaborative and well-run business. Key responsibilities * Deliver highways and drainage designs for development and adoptable works * Prepare calculations, sketches, design models and technical drawings * Use AutoCAD, Site3D, Causeway Flow or similar software * Work to current standards including CIRIA guides, BRE Digest and BS EN 752 * Support S278, S38 and S104 approvals and related submissions * Manage your workload across multiple projects and support programme delivery * Undertake site visits and prepare reports and specifications * Support junior staff and contribute to design quality and team efficiency Candidate requirements * Minimum 3 years of UK highways and drainage design experience * Strong AutoCAD, Site3D, Causeway Flow or similar capability * Good understanding...

Senior Hydraulic Modeller UK Flexible Location Salary: £50,000 - £60,000 Are you a Senior Hydraulic Modeller ready for a role where your technical input helps shape better wastewater and surface water solutions? This Senior Hydraulic Modeller opportunity is with a leading consultancy k

Role: Mobile Hose Technician Location: Field Based Salary: Up to £32,000 depending on experience Plus overtime My client is looking for a Mobile Hose Technician to join their growing team. This is a field-based role where you will attend customer sites to diagnose, repair, and replace hydraulic hoses and fittings on a wide range of machinery and equipment. This role involves travelling to customer locations including construction sites, factories, farms, and industrial facilities to provide fast and effective hose repair solutions. Responsibilities • Attend customer sites to diagnose and replace hydraulic hoses, • Manufacture and fit hydraulic hose assemblies

Centre Lathe Turner required for a well-established specialist supplier of hydraulic and Electric Submersible Pumps.

About The Role Job Title: Baler and Compactor Field Service Engineer Division: phs Wastekit Croydon Purpose of Role Service Engineers are responsible for servicing and maintaining recycling equipment on a reactive and scheduled basis. They will work towards achieving their own targets as well as customer SLAs. Service level agreements are agreed and set with our customers and must be achieved. Service Engineers will work closely with the Service Planning Supervisor, Technical Manager and Operations Director to ensure an efficient and safe delivery. Customer Service • To liaise with the call controllers and Field Service Supervisors to provide the best service to the customers., • The engineer is expected to help plan their daily work to maximize customer service, achieve the highest standards and productivity using electronic and verbal communications as appropriate., • The engineer should always try and take ownership of engineering issues so that the customer is provided with good service., • Engineers are expected to achieve targets set by their Field Service Supervisor and be aware of all customer service level agreements and aim to adhere to them always., • May be required to work out of area during periods of varying workload volumes and during engineer shortages which can require overnight stays.Records and Documentation, • To complete all paperwork and electronic data as required by Wastekit or the customer according to the company procedures., • Accurately record time, parts used and any other details either electronically or manually as required., • Prompt action should be taken to ensure replacement parts are acquired to replenish van stock or parts specially ordered to return to a breakdown being mindful of any customer SLAs., • Pass on any new business leads to sales department.Skills/Knowledge and Qualifications Required, • Shall have good fault-finding and diagnostic skills, • To be able to understand hydraulic and electrical circuit diagrams., • Will be able to show and apply sound knowledge of mechanical, electrical and hydraulic principles, • Can use and understand various electrical and hydraulic test equipment, • Update engineering knowledge when able., • Always use cost effective but safe measures to carry out tasks., • Can work with the minimum of supervision., • To attend meetings and training courses as required by your Field ServiceStandards, • Comply with all requirements in the Work Instruction for Engineer Responsibilities., • Comply with instructions given by Field Service Supervisors, Managers and Directors., • To maintain and use company issued equipment and vehicles in a safe manner and according to PHS Group policies., • To take responsibility for the safe keeping of stock and be accountable for stock balances., • To keep accurate records (using stock usage sheets and or electronic recording as appropriate) of when and where the stock is used., • Any documentation which is required to be returned to the office is done so in time., • Vans should be kept clean, tidy and maintained as per MFM-02 Commercial Vehicle Transport Policy and appropriate care taken of PPE, tools and stock.Desirable Knowledge and Qualifications, • Ideally from a service engineering, electrical or hydraulic background with an ability to demonstrate the skill of fault finding and repair., • City & Guilds in electrical and mechanical engineering., • Competent in the use of electrical and hydraulic test equipment., • A sound knowledge of single and three phase electrical equipment and hydraulic circuits., • A mature disciplined approach and good personal administrative and customer care skills., • 17th edition electrical regulations/City & Guilds electrical and mechanical engineering.In return for your commitment and expertise, you will receive, • A competitive salary of £40.000.00 OTE £45,000.00, • We offer accredited ILM Training in house and external training., • Ongoing career and development opportunities., • Digital GP for you and your family., • Over £1000 worth of savings and discounts at Supermarkets and High Street stores with PHS Perks., • Company pension., • 24-hour wellbeing helpline. JBRP1_UKTJ

JOB TITLE: Field Service Engineer INDUSTRY: Injection Moulding LOCATION: UK and Ireland (Field based) This is a superb opportunity working for one of the market leaders in the industry! Desired Qualifications & Attributes • Proven experience working with injection moulding machinery., • Completed engineering apprenticeship, with relevant qualifications., • Post‑qualification practical experience in an engineering environment., • Strong understanding of mechanical, electrical, hydraulic and pneumatic systems., • Experience in a field service role is beneficial (but not essential)., • Excellent fault‑finding, analytical and problem‑solving abilities., • Confident communicator with strong listening skills., • IT literate., • Positive “can‑do” attitude and commitment to high‑quality work., • Full, UK driving licence. What You’ll Do • Install, service, repair and carry out preventative maintenance on products., • Provide on‑site support to customers across the UK & Ireland (with overnight stays)., • Produce high‑quality service reports and customer documentation after each visit., • Deliver exceptional customer satisfaction through strong technical skills and a professional approach., • Work safely and comply with company and customer Health & Safety policies., • Be flexible with working hours to meet customer needs.

The Opportunity: Field Service Engineer Ready to make your application Please do read through the description at least once before clicking on Apply. Contract: Permanent Location: Sheffield / Doncaster The Briggs Equipment Group is a leading provider of asset management and maintenance solutions across the UK and Ireland. If you don't feel like you meet all of the role criteria outlined below please don't let that discourage you from applying. The Impact you will have: • Attending customer locations to determine the likely scope of the work required, assessing and agreeing with the end user his/her work priorities, ensuring safe working practices are adhered to., • Both at outset and as work progresses, liaise with controller and customer on the range of expected work providing clarity and understanding by all parties the likely timescales and associated costs are understood., • Identifying the root cause of a breakdown in a timely manner and ensure the correct parts are obtained in the most cost-effective way. Use any available resources to achieve this, including when required the Briggs Technical team, • Ensuring all work complies with engineering standards and, as relevant, Briggs/manufacturer specification/tolerances., • Carrying out inspection/checks on own work as it proceeds and ensuring that the equipment performs satisfactorily and is safe before handing back to the customer., • Identifying any further work required on a machine and ensure the customer is made aware of the fact, especially where a cost to the customer is to be incurred. The engineer should ensure that they maximise and potential revenue for equipment that has been damaged. xrnqpay, • Relevant technical qualification, • Previous experience within a similar role, • Good understanding of hydraulic, mechanical and electrical principals, • The ability to work independently and under pressure, • The ability to manage and prioritise workload, • 40 hour working week, • Overtime is Monday – Saturday and x2 on Sunday, • Vehicle is available for private use if desired (tax to be paid), • Future development and career opportunities, • Contributory pension scheme with employer contributions up to 6%, • Profitshare bonus based on business performance, • Paycare and eyecare health scheme, • If you are interested in joining the Briggs Group then please click on the apply now button and a member of the team will be in touch, • Not sure if this is the right role for you? Please feel free to visit the careers page on our website and send us your CV speculatively for a member of the team to review, • If you require any reasonable adjustments to assist you in the interview process, then please contact a member of the Recruitment team and inform them prior to attending so we can ensure these are met

Here at Pick Everard, we are passionate about creating a prosperous and sustainable future, taking a fresh perspective on the built environment. Our core values of professionalism, compassion, drive and positivity are at the heart of everything we do. Do you want to work on a variety of projects within an award-winning multi-disciplinary construction and property consultancy? Are you seeking a company that supports your wellbeing, growth, and career progression? If you answered yes to the above questions, we want to hear from you! We’re looking to appoint a talented Civil Engineer – Water Engineering, to join our fast-growing Water Civil Engineering team in Manchester . In this role, you’ll play a key part in delivering innovative cleanwater and wastewater projects, working as a valued member of one of our project teams. You will contribute to projects for major water companies, either directly for our utility clients or in collaboration with contractors. Joining a supportive network as part of a national team, you can expect to receive valuable training, guidance and genuine scope for career development. W e have carefully considered your journey as a Civil Engineer, ensuring you have the correct tools and support to thrive. Pick Everard offers great opportunities for employees to progress their career in a number of areas including further developing technical expertise, initial project management and early leadership skills. Mentors are available for everyone, as we are dedicated to providing development opportuniti es for you. Your core responsibilities will include: • Undertaking analysis and assist in the preparation of outline and detailed designs, drawings, reports, technical design calculations, specifications and contract documents under supervision., • Identifying and assessing the feasibility of options and solutions to deliver wastewater and/or clean water infrastructure and non-infrastructure schemes across number of regions in the UK., • Assisting in the management of projects, including having a financial understanding, from feasibility to completion., • Responsibility for carrying out discrete parcels of work accurately within set timescales., • Attending meetings, usually accompanied by senior staff., • Carrying out site inspections and surveys., • Supervising technicians and CAD technicians as required on a day-to-day basis., • Helping ensure projects are delivered to quality on time and budget., • Ensuring you understand and comply with all Health & Safety requirements, practices, and procedures. About You Our ideal Civil Engineer - Water Engineering will have: • A BEng in Civil Engineering, preferably with a focus or interest in water engineering., • Ambitions to achieve IEng or CEng., • Some work experience with consultant or contractor (desirable) ., • A solid understanding of engineering principles, hydraulic analysis, and clean water/wastewater treatment processes is desirable., • Familiarity with Health & Safety legislation (especially CDM) and CAD., • Strong written communication skills, including annotating drawings, and writing clear reports and letters., • A collaborative mindset and ability to work effectively within multidisciplinary teams., • A willingness to learn, grow, and take on new challenges. We’re committed to creating sustainable communities where everyone feels safe, cared for and valued. We achieve that by encouraging a diverse, welcoming workplace for our people, clients and colleagues. We care about our people and improving our society and that means supporting your ambitions and interests at every level. We will provide you with an inspiring environment in which you will be able to drive real progress and impact in your career. What we offer Providing a balanced, enjoyable career is important to us, and we work hard to make sure everyone feels a valued part of our organisation. You will receive an attractive salary, and amongst other benefits you can also expect: • Agile working., • Career and Professional Development., • Corporate Social Responsibility opportunities., • 26 days’ annual leave + Bank Holidays + option to buy up to 5 days’ additional leave., • Private healthcare, life assurance and healthcare cash plan., • Stakeholder pension., • Professional subscriptions., • Employee Discount Scheme., • Eyecare Scheme. As an equal opportunities’ employer, Pick Everard is committed to the equal treatment of all current and prospective employees and does not condone discrimination on the basis of age, disability, sex, sexual orientation, pregnancy and maternity, race or ethnicity, religion or belief, gender identity, or marriage and civil partnership. We aspire to have a diverse and inclusive workplace and strongly encourage suitably qualified applicants from a wide range of backgrounds to apply and join us on our journey. Accessibility We’re committed to helping you perform at your best throughout the recruitment process. If you have a disability or require any adjustments to support your application or interview, please get in touch with us at We’ll be happy to discuss how we can assist you. Agencies We are committed to building and nurturing great relationships with our agency partners. However, this role is being recruited for directly and therefore we are not seeking support at this time. Any unsolicited CV Introductions will not be accepted. #LI-Hybrid #LI-WB1

HGV TECHNICIAN £50,000+ 1.5X OVERTIME DAYS EARLIES/LATES We're proud to be partnered with a nationwide fleet management business, who are looking for skilled HGV Technicians ready to take the next step in their career at their first-class facility in Maltby. The company is a well-established provider of HGV maintenance and repair services for over 30 years, trusted by some of the UK's largest commercial fleet operators to keep their vehicles on the road. The role has a particular focus around the maintenance & repair of a fleet of trucks & trailers for one of the largest logistics chains in the country. We're looking for passionate people to join this mission and drive the business forwards; it's an opportunity to be a part of one of the fastest growing, most forward-thinking teams in the fleet industry. The Requirements: Qualification in Heavy Goods Maintenance or experience in a similar role Strong understanding of routine truck & trailer repairs & servicing Knowledge of electrical, mechanical and hydraulic fault diagnosis Experience preparing trailers for MOT testing Have own basic tools, with larger equipment provided on site Exposure to elements of welding and metal working The Package: £50,000+ earnings (including bonus & overtime) Overtime paid 1.5x hourly rate with plenty available 4 on 4 off working pattern, meaning you only work half the days a year Life assurance £1,000 refer a...

Position: Bench Fitter Location: Killamarsh, Sheffield Hourly rate: 16.12 per hour Assembly Operative required for a well-established specialist supplier of hydraulic and Electric Submersible Pumps. The successful Candidate will be undertaking assembly, disassembly and repair works on Diesel Pumps, Gearboxes and Diesel Engines. It is envisioned that the successful candidate will come from a background in Marine or Pump Fitting, have completed a Mechanical apprenticeship and be based within a commutable distance of Sheffield. Bench Fitter Position Overview Carrying out assembly of pump related components and sub-assemblies Conduct refurbishment works to existing machinery. Preparation and creation of parts lists for assembly. Carrying out functionality tests to check for mechanical or electrical faults in order to comply with strict quality standards. Preparation of completed equipment for client or factory testing. Adhering to Health & Safety and other regulations/standards-thus maintaining a safe working environment.Bench Fitter Position Requirements A HND / HNC / Apprenticeship Served qualification in mechanical engineering would be advantageous. Previous experience with assembly / disassembly and repair of pumps / engines or motors is essential. Ability to read and work from engineering drawings. Able to use small hand tools and manual machinery. A close attention to detail and initiative. Previous experience working to s...

Join a Leading UK Supplier of Specialist Vehicles & Heavy Equipment. We are seeking a skilled Mobile Service Engineer / HGV Technician / Plant Fitter to support customers across the region. This is an excellent opportunity for an engineer experienced with HGVs, plant machinery, heavy equipment, terminal tractors, or airport GSE. Location: Multi Location, UK Wide Salary: Up to £44,000 basic + overtime (x1.5) Hours: Monday-Friday, 8am-6pm, NO weekends Benefits: Company van & fuel card, pension, technical training, wellness programme and more. The Role - Mobile HGV Technician You will carry out a wide range of servicing, inspections, fault-finding, diagnostics and repairs on: • Distribution Tractors, • Ro-Ro Tractors, • Terminal / Yard Tugs, • Airport Ground Support Equipment, • Diagnose mechanical, electrical, hydraulic and pneumatic issues., • Conduct detailed safety inspections and produce accurate reports., • Use diagnostic systems, technical manuals and test equipment to identify faults., • Complete all work to manufacturer standards and in line with safety procedures., • Liaise with customers and obtain sign-off for c...

Dutton Recruitment (Sheffield Engineering) are currently recruiting: We are looking for Diesel Fitters for a permanent positions in Glasgow, Edinburgh and Wokingham. Salaries • Glasgow is £32,691 per annum, • Edinburgh is £32,691 per annum The position includes servicing and repairing and is shop-based work. • The position includes site servicing, repairing and setting up (including delivering and collecting), as well as shop-based work., • Some knowledge on hydraulic systems or open to new training and learning new skills, • Must be able to keep accurate maintenance records, • Must have full driving licence JBRP1_UKTJ

An industry leading manufacturer has a new vacancy for a Maintenance Engineer to join the team. Joining at a time of company expansion, you will be tasked with carrying out preventative and reactive maintenance on a range of plant machinery to ensure production times are met and that machinery works to maximum efficiency with minimum downtime. Candidates are sought who are electrically qualified and have previous experience working in an industrial environment. The Role Perform regular maintenance and inspections on plant machinery, equipment and facilities. Carry out planned maintenance activities in line with the maintenance schedule. Identify and resolve any technical issues that could affect production efficiency. Monitor equipment performance and make recommendations for improvements. Working and partnering with contractors. Adopt and promote continuous improvement methodologies. Ensure compliance with health and safety regulations, ensuring all machinery operates safely. Collaborate with the engineering team to upgrade and improve existing systems and machinery. Ensure the PPM schedules are adhered to. The Person Proven experience as a Maintenance Engineer within an industrial environment. Strong knowledge of mechanical, electrical, and hydraulic systems. Electrically qualified. Good knowledge of reading electrical drawings, technical manuals and instructions. Excellent problem-solving and analytical skills. Good understanding of health and safety regulations. JBRP1_UKTJ

Mechanic (HGV / Unimog Training Provided) £32,000 - £42,000 + Monday to Friday + Training + Generous Pension + Progression + Company bonus Bentham, Lancaster Are you a Mechanic looking for a Monday to Friday role where you will receive full HGV and Unimog training while working on bespoke builds, specialist conversions and full restorations within a close-knit workshop environment? Established in 1976, this specialist operates within the off-road vehicle engineering sector, focusing on Unimogs. The company sources, sells, refurbishes and custom-builds vehicles, providing full workshop support, bespoke fabrication and expedition body builds. They serve agriculture, utilities, industry and overlanding markets requiring reliable, heavy-duty 4x4 solutions. In this role, you will work on Unimogs and other 4x4 trucks, diagnosing mechanical faults and carrying out routine maintenance, specialist conversions, performance upgrades, full restorations, fabrication and camper body builds. You will also undertake inspections, repairs and component rebuilds, working both independently and as part of a skilled workshop team, ensuring all work meets high quality and safety standards. This role is Monday to Friday, 8:30am-5:00pm. This role would suit a Mechanic with strong mechanical fault-finding skills who is looking to develop their expertise through full HGV and Unimog training while working on bespoke builds, specialist conversions and restorations within a skilled workshop team. The Role: • Diagnose and repair mechanical faults on Unimogs and 4x4 trucks, • Carry out pre planned servicing and maintenance, • Complete specialist conversions and upgrades, • Undertake full restorations and rebuilds, • Work within a team of 5, • Experience as a Vehicle Mechanic or Technician, • Mechanical fault-finding and diagnostic skills, • Full Drivers License If you're interested in this role, click 'apply now' to forward an up-to-date copy of your CV. We are an equal opportunities employer and welcome applications from all suitable candidates. The salary advertised is a guideline for this position. The offered renumeration will be dependent on the extent of your experience, qualifications, and skill set. Ernest Gordon Recruitment Limited acts as an employment agency for permanent recruitment and employment business for the supply of temporary workers. By applying for this job, you accept the T&C's, Privacy Policy and Disclaimers which can be found at our website. JBRP1_UKTJ

Job Title: Maintenance Engineer Location: Whitstable Site - Maintenance Department Salary: To include + 25% shift premium and eligible for overtime Contract: Permanent, Full-Time (37.5 hours per week) Working Hours: Rotating shift pattern: * Week 1: Monday-Friday 6:00am-2:00pm * Week 2: Monday-Thursday 2:00pm-10:30pm, Friday 2:00pm-7:30pm About the Role: We are seeking a skilled Maintenance Engineer to join our Maintenance Team at our Whitstable site. In this role, you will be a key member of the team, supporting both reactive and planned maintenance across plant and facilities, as well as contributing to continuous improvement initiatives. You will also assist with projects such as new equipment installations, site regeneration activities, and sustainability improvements. Key Responsibilities: * Diagnose, repair, and maintain electrical, mechanical, hydraulic, and pneumatic systems. * Perform Planned Preventative Maintenance (PPM), including condition-based monitoring and follow-up on remedial works. * Respond promptly to breakdowns and unplanned maintenance issues. * Support installation and commissioning of new equipment and systems. * Work with internal teams and third-party contractors to ensure smooth operations and adherence to safety standards. * Maintain and document maintenance activities accurately in the CMMS system. * Support facilities maintenance including buildings, utilities, and communications systems. * Interpret technical drawings, schematics, and operating instructions to carry out maintenance tasks effectively. * Identify gaps in current processes and propose solutions to improve efficiency and performance. Essential Qualifications & Experience: * GCSE Maths and English Grade 5 (or equivalent) * NVQ Level 3 in an Engineering discipline (or equivalent) * Minimum of 5 years' experience in a similar maintenance role * Strong technical knowledge across multiple engineering disciplines (electrical/electronic, hydraulics, pneumatics, water processes) * Skilled in fault-finding and interpreting technical diagrams * Competent in using computers for maintenance logs, purchase orders, and communication Desirable: * Completed work-based apprenticeship in a similar role * Safety qualifications such as IOSH Working Safely * Discipline-specific qualifications, e.g., 18th Edition Wiring Regs * Knowledge of CNC machinery, Injection Moulding, Automation, or Plating processes * Training in software/automation systems Please Note that unfortnately we are now UNABLE TO PROVIDE SPONSORSHIP FOR THIS ROLE JBRP1_UKTJ

Job Description Senior Hydraulic Modeller Permanent full-time(37.5hours) Remote Working - With regular travel to offices and clients as required Competitive salary plus benefits Come and join a business where you will have the opportunity to grow a team in an environment where success relies on nurturing a motivated and enthusiastic workforce, and employee contribution is valued and rewarded. The role will Include: -Supervising others to undertake the following tasks whilst also delivering their own programme / projects. -Planning and supervising various surveys -Building hydraulic models -Verification of hydraulic models -Analysing results using a variety of software packages including excel and -Generating plans using Mapinfo. -Solution modelling -Auditing the work of others (both internal and external) Other responsibilities will include: -Report writing, -Engaging with clients either on the phone and or via email. -Attendance at meetings with clients -Supervising and checking the work of more junior members of staff. JBRP1_UKTJ

Principal/Senior Civil Design Engineer (Water Industry) Location: Manchester (Hybrid working) Contract: 12 month contract Rate: £400 to £490 per day (outisde IR35) An established engineering consultancy business is seeking an experienced Principal/Senior Civil Design Engineer to support the delivery of civil design solutions across regulated clean and wastewater projects in the UK. This is a contract opportunity suited to candidates with strong technical capability, leadership experience, and a background in the UK Water Industry Key Responsibilities • Produce civil design deliverables that meet safety, quality and regulatory requirements, • Identify efficient design solutions from scopes and site visits, communicating effectively with clients and project teams, • Direct, support and develop CAD Technicians, junior designers and graduates, • Prepare design risk assessments, reports and technical specifications, • Ensure designs comply with relevant technical, professional and water company standards, • Minimum 10 years' design experience within the regulated water industry, • Experience carrying out hydraulic calculations and producing hydraulic profiles, • Degree qualified, HND, or significant experience from Technician level, • Chartered Engineer, • Experience across both clean water and wastewater projects, • Background in infrastructure and non-infrastructure design If you are a Senior Civil Design Engineer with water industry experience and are looking for your next contract role, please apply or get in touch for a confidential discussion JBRP1_UKTJ

About The Role Job Title: Field Service Engineer - Dartford Division: Wastekit Purpose of Role Service Engineers are responsible for servicing and maintaining recycling equipment on a reactive and scheduled basis. They will work towards achieving their own targets as well as customer SLAs. Service level agreements are agreed and set with our customers and must be achieved. Service Engineers will work closely with the Service Planning Supervisor, Technical Manager and Operations Director to ensure an efficient and safe delivery. Customer Service • To liaise with the call controllers and Field Service Supervisors to provide the best service to the customers., • The engineer is expected to help plan their daily work to maximize customer service, achieve the highest standards and productivity using electronic and verbal communications as appropriate., • The engineer should always try and take ownership of engineering issues so that the customer is provided with good service., • Engineers are expected to achieve targets set by their Field Service Supervisor and be aware of all customer service level agreements and aim to adhere to them always., • Maintain confidentiality and discretion always., • Carry out any reasonable task deemed necessary., • May be required to work out of area during periods of varying workload volumes and during engineer shortages which can require overnight stays., • Always carry your ID and any Health and Safety accreditation (cards) when at work.Records and Documentation, • To accurately and clearly complete all paperwork and electronic data as required by Wastekit or the customer according to the company procedures., • Accurately record time, parts used and any other details either electronically or manually as required., • Prompt action should be taken to ensure replacement parts are acquired to replenish van stock or parts specially ordered to return to a breakdown being mindful of any customer SLAs., • Pass on any new business leads to sales department.Skills/Knowledge and Qualifications Required, • Shall have good fault-finding and diagnostic skills, • To be able to understand hydraulic and electrical circuit diagrams., • Will be able to show and apply sound knowledge of mechanical, electrical and hydraulic principles, • Can use and understand various electrical and hydraulic test equipment, • Be aware of the Companys procedures and adhere to them always., • To pass on any technical knowledge that may help other engineers., • Use good engineering practice and standards always., • Update engineering knowledge when able., • Always use cost effective but safe measures to carry out tasks., • Can work with the minimum of supervision., • To attend meetings and training courses as required by your Field Service Supervisor.Standards, • Comply with all requirements in the Work Instruction for Engineer Responsibilities., • Comply with instructions given by Field Service Supervisors, Managers and Directors., • To maintain and use company issued equipment and vehicles in a safe manner and according to PHS Group policies., • To take responsibility for the safe keeping of stock and be accountable for stock balances., • To keep accurate records (using stock usage sheets and or electronic recording as appropriate) of when and where the stock is used., • Ensure correct uniform is worn and kept in clean condition and always use PPE when it is required., • Any documentation which is required to be returned to the office is done so in time., • Vans should be kept clean, tidy and maintained as per MFM-02 Commercial Vehicle Transport Policy and appropriate care taken of PPE, tools and stock.Desirable Knowledge and Qualifications, • Ideally from a service engineering, electrical or hydraulic background with an ability to demonstrate the skill of fault finding and repair., • City & Guilds in electrical and mechanical engineering., • Competent in the use of electrical and hydraulic test equipment., • A sound knowledge of single and three phase electrical equipment and hydraulic circuits., • A mature disciplined approach and good personal administrative and customer care skills., • 17th edition electrical regulations/City & Guilds electrical and mechanical engineering. JBRP1_UKTJ

Service Engineer (Compressors / Hydraulics / Pneumatics) £35,000 - £40,000 + Overtime + Training + Company Van + Company Benefits Crawley Are you a Service Engineer or similar with a background in Compressors, Hydraulics, Pneumatics or similar? Are looking to join a subsidiary of one of the largest manufacturers in the industry? A company who are willing to fully invest in your training or qualifications to increase your skillset, a local patch to travel, with flexible hours and the opportunity to significantly boost your earnings with overtime? On offer is the opportunity to join a distributor that was founded over 25 years ago, they are one of the industry leaders who invest significantly in their staff to promote growth and progression. They supply their turnkey compressed air solutions to SMEs and blue chip clients within a range of industries including food manufacturing, scientific, healthcare and transport. In this autonomous and varied role, you will be covering local sites around the South East of the UK and be responsible for service, maintenance and installation of compressors and related equipment such as refrigeration, pipework, and air dryers. There will be ongoing training given on all aspects to allow you to progress to a rounded Service Engineer, with the opportunity to move into a Senior role further down the line. This is a Monday to Friday role, with flexible hours and overtime that can boost your earnings. This role would suit a Service Engineer or similar with a background in Compressed Air, Hydraulic or Pneumatic systems, who wants to join an industry leader that will provide comprehensive onboarding and additional training alongside mentorship, the opportunity to progress and the ability to boost earnings with overtime. The Role: • Working on compressors, pipework, driers, and industrial units, • Service, Maintenance and Installation works, full product training given, • Covering the South East, door to door pay., • Overtime , x2 on a weekend., • Service Engineer or similar, • Background in Air Compressors, Hydraulics or Pneumatics, • Happy to South East - Full UK Driving License Reference: 24562A Key Words: Dryers, Mechanical, Electrical, Service Engineer, Maintenance Engineer, Service, Maintenance, Compressors, Compressed Air, Air Compressor, Crawley, Dartford, Maidstone, Kent, Essex, Brighton, Canterbury If you're interested in this role, click 'apply now' to forward an up-to-date copy of your CV. We are an equal opportunities employer and welcome applications from all suitable candidates. The salary advertised is a guideline for this position. The offered renumeration will be dependent on the extent of your experience, qualifications, and skill set. Ernest Gordon Recruitment Limited acts as an employment agency for permanent recruitment and employment business for the supply of temporary workers. By applying for this job, you accept the T&C's, Privacy Policy and Disclaimers which can be found at our website. JBRP1_UKTJ

Job Title:Night Shift Maintenance Engineer Location:Doncaster - Stainforth Salary:£46,800 Industry:FMCG Job Type:Permanent, Full Time Shift:SundayThursday or MondayFriday Hours:45 Hours Per Week 1 Hour Paid Lunch Per Day Do you have Maintenance Engineering experience in FMCG, Pharmaceutical, Chemical, Automotive, Plastics or Packaging environments and happy to work the Night Shift? If so, this role is for you. About the Company: Our client is a well-established, multi-site FMCG organisation and a major employer in the Doncaster region. The business is investing heavily in staff development, upgrading manufacturing facilities, and expanding teams across all departments to support continued growth. Employees benefit from a stable environment with a strong focus on progression and long-term development. Benefits Competitive salary package Stable, long-term position within a well-established manufacturing business Excellent career progression opportunities within engineering and management Investment in training and professional development Exposure to a modern automated manufacturing environment Supportive engineering leadership team Opportunity to contribute to continuous improvement and site development projects Secure role within the essential food manufacturing sector Key Maintenance Engineer Responsibilities: Perform reactive maintenance and PPM on machinery to ensure reliability. Respond to breakdowns and carry out repairs across mechanical, electrical, pneumatic, and hydraulic systems. Monitor equipment performance and implement corrective actions to prevent issues. Prioritise engineering tasks in line with night shift production needs. Maintain health & safety and food safety compliance while working in controlled environments. Record maintenance activity in the CMMS and keep documentation up to date. Support continuous improvement projects and equipment upgrades. Keep engineering areas clean, organised, and safe. Manage spare parts and tools, ensuring availability and maintenance standards. Requirements: Qualifications NVQ Level 3 or equivalent in Mechanical, Electrical, or Multi-Skilled Engineering Completed apprenticeship or recognised engineering training preferred Experience 3+ years experience in engineering roles 2+ years experience in FMCG or food manufacturing Skilled in PPM, breakdown repairs, and fault finding Familiarity with production machinery and plant equipment JBRP1_UKTJ

Field Service Engineer Nationwide Service Provider Yorkshire Salary: £30,160 - £30,680 + door to door + on-call + overtime = £40k - £50k + Company Van + Tools + Workwear + Training Are you a qualified within mechanical engineering, vehicle mechanics or plant? Are you looking for an opportunity within field service where full ongoing training will be provided? Are you looking to join a business who truly cares for, nurtures and develops their people? If so, then this could be the ideal role you have been looking for. On joining this business you will be trained on how to repair and service a wide range of mechanical and hydraulic equipment including load lifters, steps, cranes, ramps, winches and moving decks and in turn gain arecognised industry certification. Whats on offer. • Ongoing training and career development including the opportunity to gain a recognised industry certification, • Endless earning potential and fully kitted out Vans with all the tools required for you to do your job., • Close support network of experienced Engineers and Managers, • Comprehensive workshop and onsite training where you will shadow one of their many long serving Engineers. The role will require you to be on-call 2 in 5 weekends and 2 evenings during the week. You will be ideally qualified to NVQ level or equivalent in mechanical engineering, vehicle mechanics, plant machinery or similar; have a practical approach to problem solving; be comfortable using various hand tools and have some experience or a basic understanding of mechanical engineering, hydraulics and electrics. We are particularly keen to speak to committed, hardworking individuals who are looking to build a long-term career within a business that truly cares for, nurtures, and develops their people with proof of family members across 3 generations working for the business. JBRP1_UKTJ

The Role • Permanent We are looking for an Electrical Supervisor to lead electrical teams on planned works, reactive maintenance, and project installations. You will ensure all electrical activities are completed safely, on time, within budget, and in line with company standards and UK regulations. The role will also involve attending site to scope new works, providing technical input for pricing, and supporting the development of accurate quotations. Key Responsibilities Team Leadership & Supervision * Supervise electricians and apprentices on site. * Plan, allocate, and monitor daily tasks to ensure efficient workflow. * Provide technical guidance and support to the team. * Conduct site briefings, toolbox talks, and team updates. Project & Work Delivery * Oversee electrical installation, maintenance, and testing works. * Ensure projects are delivered in line with drawings, specifications, and RAMS. * Coordinate materials, equipment, and subcontractors. * Monitor progress and report issues, delays, or variations to the Project Manager. Safety, Compliance & Quality * Ensure work is completed in accordance with BS 7671 (IET Wiring Regulations), Electricity at Work Regulations, and company H&S policies. * Conduct site inspections to ensure safe working practices. * Complete and review documentation including permits, risk assessments, method statements, and quality checks. Testing & Certification * Carry out electrical testing, fault finding, and commissioning. * Complete electrical certificates and reports accurately. * Ensure compliance with NICEIC or equivalent accreditation standards. Client & Stakeholder Communication * Act as a key point of contact for clients, site managers, and contractors. * Attend coordination meetings and provide progress updates. * Maintain strong customer relationships and resolve site issues promptly. Administration & Reporting * Maintain accurate records of labour, materials, and site activities. * Submit daily or weekly reports to management. * Assist with preparing variations, quotations, and job completion documentation. Key Skills / Qualifications Essential * NVQ Level 3 in Electrical Installation or equivalent. * 18th Edition Wiring Regulations (BS 7671). * Strong supervisory or team-leading experience. * Experience in industrial or commercial electrical installation or maintenance. * Full UK Driving Licence. Desirable * Testing & Inspection (2391 or equivalent). * SSSTS or SMSTS qualification. * First Aid at Work. * IPAF, PASMA, or confined space training. * Experience within marine, industrial, or engineering environments. Skills & Attributes * Experience supervising teams within an engineering or service environment. * Ability to manage teams, subcontractors, and projects effectively. * Strong understanding of health & safety procedures, compliance, and risk management. * Excellent communication, organisation, and problem-solving skills. * Commitment to maintaining a safety-first culture, conducting site audits, reporting hazards, and ensuring compliance with company and customer standards. JBRP1_UKTJ

The Role • Permanent Key Responsibilities Core Duties • Analyse job cards and work instructions to determine scope, status, limitations, and requirements., • Inspect, test, assemble, and commission industrial equipment to ensure compliance with customer specifications and internal standards., • Carry out fault diagnosis, repair, and maintenance of equipment in a safe and efficient manner., • Record work undertaken, parts used, and time spent, ensuring accurate completion of job documentation., • Operate workshop and site equipment safely, in line with training and company procedures., • Liaise with customers, colleagues, and management to provide updates and technical support., • Ensure all work is completed to the required quality and delivered on time., • Promote and uphold company values, focusing on safety, quality, and customer satisfaction., • Proven engineering/technical background in industrial maintenance., • Ability to interpret engineering drawings and technical manuals., • Experience using hand tools, workshop machinery, and test equipment., • Strong problem-solving and fault-finding skills., • Good communication and interpersonal skills when dealing with colleagues and customers., • Recognised apprenticeship or NVQ Level 3 (Mechanical/Electrical Engineering or equivalent)., • Specialist training/certification where applicable (e.g., lifting, confined space, electrical testing)., • Valid UK driving licence preferred., • Health, Safety & Quality Responsibilities, • Comply with company and statutory health & safety regulations at all times., • Take responsibility for personal safety and that of others in the workplace., • Ensure all equipment and tools are maintained in safe working order., • Report hazards, near misses, and incidents promptly., • Maintain quality standards in line with ISO procedures and company policies. JBRP1_UKTJ

Job Title: Multi-Skilled Maintenance Technician Location:Skelmersdale Pay Rate:£19.50 per hour + 30% shift allowance Working Hours & Shift Pattern Rotating shifts, Monday to Friday: • Early:6:00am 2:00pm (MonThurs) | 6:00am 12:00pm (Fri), • Late:2:00pm 10:00pm (MonThurs) | 11:00am 4:35pm (Fri) Benefits:33 days annual leave after 12 weeks, pension, free car parking, the opportunity to work for a global company. Contract Length:1 year We are recruitingMulti-Skilled Maintenance Techniciansto join a busy manufacturing site inSkelmersdaleon a 12-month contract. This is an excellent opportunity for experienced maintenance professionals with strong electrical and mechanical skills to support high-volume, automated production lines. The successful candidates will play a key role in ensuring equipment reliability, minimising downtime, and supporting continuous improvement across production operations. Key Responsibilities as a Multi-Skilled Maintenance Technician: • Carry out planned preventative maintenance (PPM) and reactive breakdown repairs on production equipment., • Diagnose and rectify electrical, mechanical, pneumatic, hydraulic and control system faults., • Establish process conditions and perform in-line quality checks., • Monitor and control processes usingStatistical Process Control (SPC)methods., • Support production targets by ensuring equipment availability, quality and efficiency., • Maintain and improve procedures and maintenance systems., • Build strong working relationships with production and engineering stakeholders on site., • Minimum of2 years experience in machine maintenancewithin a manufacturing environment., • Time-served apprenticeship orNVQ Level 3 (or equivalent) in Electrical/Mechanical Maintenance., • Experience working withautomated assembly linesand robotics (ABB preferred; training available)., • Ability to read and interpret electrical and mechanical drawings., • Confident working to SOPs and formal training processes. JBRP1_UKTJ

Job Title: Field Service Engineer (Garage Equipment) Location: Horsham and surrounding areas Salary: £28,000 - £45,000 per annum Job Type: Full Time, Permanent About The Company: Gemco is the largest commercial garage equipment company in the UK providing repair, maintenance, installation and sales solutions to a range of fast fit centres, dealerships, independent garages and commercial fleet operators. About The Role: We aim to continue our growth by offering the most comprehensive range of products, brands, and value-added services. To help accomplish this, we are looking for a self-motivated team player who can help us on our journey, taking initiative and contributing effectively. As a home-based Field Service Engineer principally covering Horsham and the surrounding areas, you will be responsible for servicing, maintaining and repairing a wide range of electro-mechanical garage equipment at customers' sites. Previous relevant experience of working on this type of equipment would be particularly useful. Key Responsibilities: • Carry out routine maintenance / servicing / diagnostics / repairs on a wide range of garage equipment products including vehicle lifts, wheel & tyre, brake testers, gas analysers and smoke testers etc, • Completion and submission of accurate paperwork as required, adhering to health and safety regulations and complying with the Quality System, • Ensuring control of own van stock to meet First Time Fix targets, • The continued development of skills to ensure that all work is completed to a high standard, • Prepared for possible occasional overnight stays away from home (which are fully expensed), • A good level of technical education, ideally with relevant trade qualifications in garage equipment servicing or a related discipline, • Or, experienced in working with mechanical, hydraulic, pneumatic, and electrical equipment, with relevant transferable skills applicable to garage equipment, • To have a good working knowledge and experience of activities in a field service environment, • Able to understand and follow procedures and work instructions, working to specified standards, • A reasonable understanding of PC's / networking for equipment set up, or when ''trouble shooting'', • The ability to deliver excellent service to customers with a positive 'can do' attitude towards solving their problems., • Confident and able to work under own initiative., • Company Van, PPE, Phone, Tablet and tools are all provided., • Accommodation and meal allowance if staying away, • Company sick pay (increasing with service), • 'Medicash' Healthcare Plan, • Employee Assistance Programme, • 25 days holiday plus Bank Holidays, (increasing with service), • Company pension scheme, • Life Assurance (increasing with service), • A salary 'framework' that increases your pay to reflect your efforts, • £2.500 staff referral bonus NO AGENCIES THANK YOU. Please click the APPLY button to send your CV for this role, ideally to include a covering letter explaining why you feel that you would be suitable. Candidates with the experience or relevant job titles of; Field Service Engineer, Service Engineer, Garage Equipment Technician, Field Service Technician, Service Technician, Garage Engineering Technician, Field Maintenance Engineer, Field Maintenance Technician, Mechanical Engineer, Mechanical Technician, Electrical Engineer, Electrical Technician, Repair Engineer, Repair Technician, Fitter, Commercial Engineer may also be considered for this role. JBRP1_UKTJ

Job Role: Field Service Engineer (Heavy Plant) Location: Guildford, Surrey Salary: £38,000–£42,000 base salary + paid door to door (OTE £45,000–£50,000+) Hours: Monday–Friday 07:00–16:00 (flexible hours) + Company Vehicle/Fuel Card + Overtime @ 1.5x Job Type: Full-time, Permanent The Client: Interaction Technical is proud to be working in partnership with a global leader in the manufacture of specialist vehicles and equipment for road sweeping, gritting, and airport runway clearance. With a strong reputation for innovation and reliability due expanding its UK engineering team and is seeking experienced Mobile Plant Engineers to join their growing operation. This is a fantastic opportunity to join a forward-thinking company that offers full training, career progression, and a supportive team environment. The Package: • Door to door paid with all travel time and expenses paid for, • 32 days annual leave (including bank holidays), • Employer pension contribution at 4%, • Call out rota from October to March (1 in 4/5 weeks on call) - £145 call out allowance + additional £125 per Bank Holiday on call, • Occasional overnight stays required with accommodation and food paid for (£25 per night) + occasional trips abroad, • Life Assurance and Health Care Scheme, • Company van, fuel card, mobile phone, and laptop provided, • Salary Sacrifice Scheme for an additional 5 days annual leave, • Full training and development with clear progression routes The Responsibilities: • Attend customer sites to carry out servicing, diagnostics, and repairs on specialist plant and municipal equipment, • Identify and resolve mechanical, electrical, and hydraulic faults efficiently, • Perform routine maintenance and safety inspections to ensure equipment reliability, • Provide technical advice and support to customers on equipment usage and upkeep, • Maintain accurate service records and documentation for all work completed, • Liaise with the internal engineering team to share insights and improve service delivery The Requirements: • Background in Plant, HGV, Automotive, or Agricultural engineering (essential), • Strong diagnostic skills across mechanical, electrical, and hydraulic systems, • Experience working with engines and fault-finding tools is advantageous, • Recognised engineering qualifications (NVQ, City & Guilds) are desirable, • Full UK Driving Licence is essential, • HGV licence preferred or willingness to obtain one (training support available), • Self-motivated, dependable, and capable of working independently in the field Interaction Recruitment have specialist consultants across the majority of industries within the UK, including but not limited to, Finance & IT, Technical & Engineering, Industrial, Commercial and Hospitality. We offer both temporary and permanent support. For more information regarding the position or to discuss any other opportunities, you can reach Reegan on or 07969 154 727 Thank you for taking the time, we hope to speak in the near future INDTE JBRP1_UKTJ

Are you an ambitious and commercially minded Flood Risk Consultant looking to take the next step in your career? I'm partnering with a well-regarded development consultancy to appoint an Associate who will build and lead a new flood risk service line within an established, growing business. This is more than a delivery role - it's a genuine opportunity to shape a specialist offering, influence strategy and create long-term value. You'll step into a consultancy with a strong pipeline of developer and property clients, where workload will be generated through supported cross-selling into existing relationships. The platform is there - they want someone who can take ownership and run with it. The Opportunity • Establish and grow a flood risk capability within a respected multidisciplinary development consultancy, • Deliver Flood Risk Assessments, drainage strategies and technical advice across a diverse project portfolio, • Work closely with planning, development and technical teams to embed flood risk expertise across schemes, • Convert opportunities from an established client base with full internal support, • Strong technical background in flood risk, drainage or hydraulic modelling within the development sector, • Commercial awareness and experience supporting business growth or service development, • Confidence engaging clients and advising project teams, • A rare chance to create and grow a service line with real backing, • Access to an existing client base and cross-selling support from senior leadership, • Performance-related bonuses linked directly to work won and the growth of the service line, • Flexible working and choice of office location Please get in touch today with our Property and Housing Specialist Jonathan Kirby on 07860 273 465 for more details on opportunities available, or apply below with your CV. Building Careers UK are specialist in Construction and Property recruitment. BCUK acts as an employment agency for permanent recruitment and employment business for the supply of temporary workers. By applying for this job, you accept the T and C's, Privacy Policy and Disclaimers which can be found on our website. We welcome applications from individuals of all backgrounds, experiences, and identities. Our recruitment process is designed to ensure equal opportunities for all candidates, regardless of age, gender, race, ethnicity, religion, disability, sexual orientation, or any other characteristic. JBRP1_UKTJ

The Role • Permanent Key Responsibilities Core Duties Analyse job cards and work instructions to determine scope, status, limitations, and requirements. Inspect, test, assemble, and commission industrial equipment to ensure compliance with customer specifications and internal standards. Carry out fault diagnosis, repair, and maintenance of equipment in a safe and efficient manner. Record work undertaken, parts used, and time spent, ensuring accurate completion of job documentation. Operate workshop and site equipment safely, in line with training and company procedures. Liaise with customers, colleagues, and management to provide updates and technical support. Ensure all work is completed to the required quality and delivered on time. Promote and uphold company values, focusing on safety, quality, and customer satisfaction. Conduct electrical installation, inspection, and testing of motors, panels, and control equipment. Diagnose electrical faults and carry out remedial work safely in line with IEE Wiring Regulations. Key Skills and Qualifications Proven engineering/technical background in industrial maintenance. Ability to interpret engineering drawings and technical manuals. Experience using hand tools, workshop machinery, and test equipment. Strong problem-solving and fault-finding skills. Good communication and interpersonal skills when dealing with colleagues and customers. Flexible, with the ability to work both in the workshop and on customer sites. Qualifications (role-dependent) Recognised apprenticeship or NVQ Level 3 (Mechanical/Electrical Engineering or equivalent). Specialist training/certification where applicable (e.g., lifting, confined space, electrical testing). Valid UK driving licence preferred. Health, Safety & Quality Responsibilities Comply with company and statutory health & safety regulations at all times. Take responsibility for personal safety and that of others in the workplace. Ensure all equipment and tools are maintained in safe working order. Report hazards, near misses, and incidents promptly. Maintain quality standards in line with ISO procedures and company policies. JBRP1_UKTJ

Are you ready to take the next step in your career? Do you want to do meaningful work that improves quality of life? At Tetra Tech, you will work with high-performing teams who are passionate about using their expertise to find solutions to complex problems in water, environment, infrastructure, resource management, energy, and international development. Tetra Tech is one of the largest and fastest growing environmental consultancies in the world and in 2023, the Engineering News-Record (ENR) ranked Tetra Tech #1 in Water for the 20thyear in a row. We currently have a number of positions to fill within our flood risk team due to ongoing growth with our existing client base as well as new project wins with new clients. We are seeking a Senior Engineer to support our Water Engineering team throughout the UK based ideally out ofManchester, Leeds, Chorley, Cockermouth or London offices,but other locations will be considered for the right candidate. Our team undertakes a wide variety of major and challenging infrastructure projects for the private and public sector, across a range of development sectors. We seek to provide integrated flood risk and drainage solutions incorporating state of the art design. Our current flood risk portfolio includes a broad spectrum of projects across the water sector from flood alleviation schemes (FAS) for local authorities, the MOD and private sector clients through to surface water separation schemes for water utility providers. We are embedded with a number of high-profile housing developers and support them from site inception through to masterplaining, design and construction on their flood risk challenges, including design of natural flood risk management and Sustainable Urban Drainage solutions. Our varied client and project base provides our team exciting challenges to continuingly improve their skills and knowledge across the sector. As a project leader, you will guide our teams and support our clients in the delivery of the portfolio as well as support bidding and proposition activity as we continue to grow the team. Responsibilities: We require an experienced individual of high calibre to support on the delivery of projects for the Water Engineering team at Tetra Tech across a range of activities such as river, coastal and flood defence appraisal and design, hydraulic modelling and hydrology assessment, surface water management and the development of business cases. We work across a diverse range of clients delivering challenging infrastructure projects for the private and public sector. Our projects can range in size from £10k commissions up to £100m schemes covering flood risk projects for defence, transport, local government, utility, infrastructure, commercial, industrial and residential development.You will work independently and proactively on technical aspects from a projects inception, determining client briefs, to the delivery and close out of projects in accordance with best practice. You will support the delivery of projects both technically as well as support junior colleagues throughout the delivery of projects, including client facing roles. You will instruct, supervise and mentor junior staff in the design and management of schemes and work with clients to ensure delivery of projects to time and cost, and to help manage change. You will be supported by our senior technical leadership team throughout the delivery of your projects. We provide internal project management training as well as a structured learning and development platform including mentoring and coaching, CPD and training to ensure our staff are the best they can be to deliver excellence to our clients. We operate a hybrid working policy between your home office and working from home as required to suit your daily lives. However our projects are UK wide and some travel would be expected on occasion, including working outside normal office hours. The ideal candidate will be able to demonstrate some or all the requirements below: • Be anenthusiastic professional who likes a challenge., • Want to work in a busy and growing team and have a desire to progress their career., • Have experience in the delivery and leading flood risk and/or surface water separation projects from solution development, optioneering and design in line with the relevant guidance., • Experience in writing reports (including business cases) and presenting to internal and external partners., • Experienced in holding meetings with clients and leading design discussions., • Experienced in working across multidisciplinary teams to deliver projects efficiently and effectively, such as with hydraulic modellers, engineers and environmental consultants., • Experience or an interest in developing Natural Flood Management solutions., • Have an understanding and experience in working with the NPPF., • Experience in IT systems such as ArcGIS, AutoCAD, Civils 3D and the Microsoft Office suite., • Be educated to degree level or equivalent in a relevant field and Chartered with the ICE or CIWEM, or working towards achieving chartership., • Have excellent interpersonal and communication skills, ability to work independently, a collaborative approach and a proven ability to deliver work on time., • Have a commitment to encouraging good health and safety practices within the workplace and within design., • Be a team player displaying enthusiasm, flexibility and versatility., • Have the ability to mentor, encourage and support junior team members., • Have a desire to build upon your existing experience, continuing your professional development with Tetra Tech., • Hold a full UK Driving License Tetra Tech is a leading provider of high-end consulting and engineering services for projects worldwide. We combine the resources of a global, multibillion dollar company with local, client-focused delivery in more than 400 locations around the world. We are Leading with Science to provide sustainable and resilient solutions for our clients. At Tetra Tech, we provide a collaborative environment that supports individual performance, innovation, and creativity. We are proud to offer competitive compensation and benefits. For more information on our company, please visit our website at. To apply, please submit your CV and cover letter on the Careers section of our website. We thank all applicants for their interest; however only those selected for an interview will be contacted. Tetra Tech is an equal opportunities employer and encourages applications from all suitably qualified and eligible candidates regardless of sex, race, disability, age, sexual orientation, transgender status, religion or belief, marital status, or pregnancy and maternity/shared parental leave, in line with the Equalities Act 2010. We are veryhappy to discuss flexible working for this role, including the possibility of reduced hours, flexible start and finish times, or compressed hours.We can offer a range of solutions to help you to get the most out of your work / life balance. JBRP1_UKTJ

Job Title: Forestry Engineer - Chippers, Stump Grinders, Mulchers & Firewood Processors Location: FGS Plant, Ferry House, New Hythe Ln, Aylesford ME20 7PW & Mobile Salary: Competitive Job Type: Permanent, Full time Working Hours: Monday - Friday (8am - 5:30pm) About Us: DJB Machinery is expanding and we're looking for a skilled Forestry Engineer to join our team. You'll be working across a modern fleet of woodchippers, stump grinders, forestry mulchers, firewood processors, and related machinery used throughout our UK depots. About the role: To deliver comprehensive Health and Safety support across the Bexley contract, including the Bexley RRC and Waste Transfer Station. Additionally, to provide Health and Safety support to Envar Swanley, Countrystyle Recycling Otterpool, and sites operated by the London Borough of Bexley. Duties & Responsibilities: • Servicing, maintaining and repairing a wide range of forestry equipment, • Diagnosing mechanical, hydraulic and electrical faults, • Preparing machinery for customer demonstrations and shows, • Supporting customers with technical advice and on site breakdowns Requirements for this role: • Experience working with forestry, agricultural or plant machinery, • Strong mechanical and hydraulic knowledge, • Ability to work independently and manage your own workload, • A problem solver with attention to detail, • Diesel and Hydraulic Trained, • Working on Woodchippers, Stump grinders, firewood processors and Robo Machines, • Competitive salary based on experience, • Modern workshop facilities and quality tools, • Ongoing training on leading forestry brands Candidates with experience or relevant job titles of; Forestry Engineer, Forestry Machine Operative, Mechanical Engineer, Agriculture Engineer, Plant Engineer, Plant Machine Operator, Hydraulic Engineer, may also be considered for this role. JBRP1_UKTJ

Mechanical Fitter Job Summary We are seeking a skilled and experienced Mechanical Fitter to join our busy team in Taunton. The successful candidate will be responsible for building and assembling a wide range of special-purpose machinery in line with engineering drawings and quality standards. This role requires strong mechanical knowledge, hands-on assembly experience and confidence using a variety of hand and power tools. The Mechanical Fitter will play a key role in ensuring all products meet stringent quality and performance requirements. Key Responsibilities * Assemble mechanical components in accordance with engineering drawings and specifications * Use hand tools and power tools safely and effectively * Build small sub-assemblies through to larger mechanical sections * Fit bearings, taper-lock pulleys, gears and associated components * Install and run pneumatic and hydraulic pipework * Carry out quality checks to ensure all work meets required standards * Maintain a clean, safe and organised working environment * Work collaboratively with colleagues to optimise build processes and resolve assembly issues Skills & Qualifications * Fully time-served Mechanical Fitter/Engineer * Mechanical engineering qualification (essential) * Proficient in the use of hand tools and power tools * Experience using machine tools (advantageous) * Strong mechanical understanding with the ability to interpret technical drawings * Experience working with pneumatics and hydraulics * Fabrication experience (advantageous) * Excellent communication skills * Ability to set a positive example and support team members * Able to work independently and as part of a team in a fast-paced environment For more information regarding the position or to discuss any other opportunities, please call 01823 212043 and ask to speak to Adam or email Allocation Number : INDTB JBRP1_UKTJ

Job Title: Mechanical Engineering Instructor Location: Hull Salary: Up to £39,000 (Industry Professionals) / Up to £40,000 (Qualified Trainers) Contract Type: Full-Time | Permanent Are you an experienced Mechanical Maintenance Engineer ready to pass on your skills to the next generation? Join our forward-thinking education and training provider in Hull and help shape the future of engineering talent. We're looking for a Mechanical Engineering Instructor to deliver practical and theoretical training to learners from Level 1 to Level 4. This is a fantastic opportunity to bring your industry expertise into a teaching environment - no teaching qualifications required! We'll fully support and fund your journey into education. What You'll Need: * Industry experience in mechanical maintenance engineering * Strong knowledge of the safe use of hand tools * Understanding of hydraulic and pneumatic systems * Minimum of a Level 3 qualification in Mechanical Engineering * A full UK driving licence What You'll Do: * Deliver engaging workshop and classroom-based sessions * Teach and support learners across Levels 1 to 4 * Help learners develop both their technical skills and workplace readiness * Contribute to curriculum development and continuous improvement What We Offer: * Competitive salary * 42 days annual leave (including bank holidays) * Annual performance bonus * Generous pension scheme (5% employee, 7% employer) * Private healthcare (after a 3-month qualifying period) * Free on-site parking * Full support for teaching qualifications (if not already held) Important Notice Dovetail and Slate is a specialist education recruitment company. If this role isn't quite right, we welcome your CV and a call to explore other opportunities. We are committed to safeguarding children and vulnerable adults. All appointments are subject to satisfactory vetting, including a right to work check and, where relevant, an enhanced DBS, PVG (Scotland), or EWC (Wales) check, in line with Keeping Children Safe in Education. Dovetail and Slate Ltd (11351060) acts as an Employment Agency and an Employment Business under the Conduct of Employment Agencies and Employment Businesses Regulations 2003. We are an equal opportunities employer. By applying, you consent to your data being processed for recruitment purposes in line with our Privacy Policy. Because education matters. Dovetail and Slate Limited. Because education matters. Dovetail and Slate Limited (11351060) acts as an Employment Agency. JBRP1_UKTJ

Job Specification: Maintenance Engineer Location: Clitheroe, Lancashire Salary: Circa £45,000 - £50,000 depending on experience Company Overview Bryden Precision Engineering is a CNC machining business supplying complex, high-precision components into the aerospace, defence, nuclear, utilities,powerand other safety-critical sectors. We are proud holders of AS9100 accreditation and are now preparing for ISO 19443 (nuclear) accreditation as we continue to grow. Role Overview We are seeking a skilled Maintenance Engineer to join our engineering team. The role involves completing a full range of maintenance activities across the installed asset base, rapidlydiagnosingand resolving mechanical, electrical, and basic control & instrumentation faults. The successful candidate will play a key role in minimising downtime,maintainingequipment reliability, and supporting the launch and commissioning of new or refurbished machinery. Key Areas of Responsibility: * Day-to-day upkeep, maintenance, and servicing of production equipment * Rapid response to breakdowns to minimise downtime * Supporting implementation, commissioning, and launch of new or refurbished equipment * Diagnosing equipment faults and executing repairs in mechanical, electrical, hydraulic, pneumatic, and control systems * Programming fault finding, modifications, and troubleshooting via PLCs * Carrying out planned preventative maintenance (PPM) tasks and ensuring schedules are adhered to * Reading and interpreting electrical, mechanical, hydraulic, and pneumatic drawings * Implementing quality countermeasures and ensuring equipmentoperatesto specification * Participating in problem-solving and continuous improvement initiatives * Supporting 5S andmaintainingan organised, safe, and efficient work environment * Any other duties of a similar nature or level of responsibility Required Qualifications & Experience * Minimum Level 3 in Electrical and Electronic Engineering * Understanding of engineering principles and technical drawings * Ability to read and interpret electrical, mechanical, hydraulic, and pneumatic schematics * Strong practical skills with experiencemaintainingproduction equipment * Good problem-solving and diagnostic skills * Ability to work efficiently under pressure and manage multiple tasks * Strong communicationand teamwork skills * Good numeracy and analytical skills * BTEC HNC Electrical or equivalent * Experience with PLC programming and fault diagnosis * Previousexperience in a precision engineering or CNC manufacturing environment * Knowledge of quality systems (AS9100) and safety-critical processes Personal Attributes * Highly organised and self-motivated * Proactive and flexible approach to work * Strong attention to detail and quality-focused * Ability to work effectively in a team and independently * Committed to continuous development and learning Bryden Precision Engineering is committed to developing the technical skills of its employees, supporting career growth, andmaintainingthe highest standards of quality and safety across all sectors. To apply for this role please send a fully updated CV to our Recruitment Manager Carolann JBRP1_UKTJ

Synopsis: Our client is seeking a Commissioning / Installation Engineer from an industrial equipment background. £K Excellent Negotiable Salary + Quarterly Bonus, Car Scheme, Excellent Pension, etc. Flexible Central England Location, East /West Midlands, Greater Manchester, Bristol Area Job Title: Commissioning / Installation Engineer - Industrial Vacuum Equipment Package:£K Excellent Negotiable Salary + Quarterly Bonus, Company Vehicle, pension etc. Area / location:Flexible Central England Home Base (Near an Airport) with UK Remit Brief job description: Our Client, a Global Leader in the supply, installation and support of Industrial Vacuum furnaces, are expanding their UK based Service Team. They are currently looking for Commissioning / Service Engineers ideally located in Central England. The position requires travel throughout the UK, Europe.The successful candidate would be mainly based in the UK and should be expecting to be away from home Monday to Friday if the site is not within travelling distance of their home. There is also the possibility of periods of overseas work where the engineer would be expected to be away for up to 4-5 weeks, anytime above this would be agreed between the engineer and their manager beforehand. A team of engineers share the overseas work and would not be left to one engineer.This role is ideally suited to a person with electro/mechanical maintenance background wanting to get into the service / installation industry. The role will primarily be to supervise installation contractors while the equipment is being installed and then take the equipment through the site acceptance tests however there will be service work required as well from time to time.The successful applicant will have the following technical capabilities: Electrical and /or Mechanical qualification C&G or equivalent. Understand electrical schematics Understand mechanical drawing. Fault finding and regular maintenance functions of mechanical assemblies, drives, pumps etc. Familiarity with pneumatic, water, hydraulic & electrical systems and their functions. Working knowledge of temperature control instrumentation, invertors PLCs and HMIs Experience with Allen Bradley & Siemens PLC programmes. Experience with other types will be considered. Experience with fault finding PLC programs. Familiarity with Microsoft Office programmes.Additional skills / qualifications that would be advantageous but not essential as product training will be given. Knowledge of vacuum technology would be an advantage. BS7671 18th Edition Qualification. C&G 2391-52 Initial and periodic inspection and testing. Ability to modify PLC programs to instructions given by the engineering department. JBRP1_UKTJ

Field Service Engineer (hydraulic / pneumatic / mechanical) - Recycling Equipment QCR is the leading supplier of recycling equipment in the UK, selling nationally to a broad range of sectors. Our customers are some of the best known names in retail, hospitality, industry, logistics and leisure and are as diverse as Buckingham Palace and HM Prison Service, and all things in between. This is a fantastic opportunity for you to join a successful Service team within a flexible, innovative and extremely driven company within an expanding yet competitive business sector. We celebrated 25 years in business - you can be confident of job security. As a Service Engineer you will be responsible for the service and repair a range of recycling equipment predominantly parts of Hampshire, Dorset, Wiltshire and W Sussex, depending on where you live, ideally central to these areas. Occasionally youll travel out of area for holiday cover. Typical equipment includes pneumatic and hydraulic recycling balers and compactors, bin presses, glass crushers, can crushers etc. Skills required : • Hydraulic, Pneumatic and Electro Mechanical experience, but we are willing to train someone who is mechanically minded with a keen interest in how things work and can demonstrate the ability to fault find and problem solve., • We aim for you to complete BCAS Competent Examiner training within 12 months of starting. This is British Compressed Air Society, for examining the air receivers (compressors), with our pneumatic balers., • Driving Licence, • Ability to demonstrate a high level of customer service., • Excellent problem solving skills, be flexible, and display a positive attitude., • Ability to work under own initiative adhering to Health & Safety guidelines. QCR welcomes applications from ALL ages; we value experience, wisdom and time served skills. This is a full time position, standard week is 40 hours Monday Friday. Overtime may be available depending on workload. DBS checks may be required given the nature of some of the businesses youll visit. Salary: c £30-36k basic (depending on experience) + 28 days holiday inc bank holidays, plus Workplace Pension STRICTLY NO AGENCIES JBRP1_UKTJ

Location:Newcastle Company:Chippindale Plant Job Type:Full-time Are you a skilled fitter with a passion for plant and machinery maintenance? Chippindale Plant is looking for a dedicated MobileFitterto join our team. This is a fantastic opportunity to work with a respected name in the industry, where your technical expertise will help keep our fleet running safely and efficiently. About the Role As a Mobile Fitter, youll be responsible for inspecting, servicing, and repairing a wide range of plant machinery and equipment. Although the majority of your time will be mobile attending site breakdowns you will also spend time in the workshop. Youll play a key role in ensuring all equipment is safe, reliable, and ready for usewhether its new to the fleet or returning from hire. Key Responsibilities • Inspect machinery for defects and safety compliance, • Perform routine servicing and maintenance, • Diagnose faults using reports and specialist tools, • Dismantle, repair, and reassemble components, • Conduct safety checks on new equipment before first use, • Maintain accurate service records and escalate major faults, • Operate lifting equipment in line with LOLER regulations, • Carry out basic welding and use hydraulic presses, • Keep the workshop clean, safe, and organised, • Follow all Health & Safety proceduresQualifications & Experience, • Proven experience diagnosing and repairing plant, machinery, or lifting equipment, • Strong understanding of hydraulic systems and basic electrical skills, • Experience using large workshop equipment and specialist tools, • NVQ Level 3 in Plant & Machinery or Land-Based Engineering (desirable), • Manufacturer training on industry products (advantageous)Person Specification, • Strong fault-finding and problem-solving skills, • Able to work independently and as part of a team, • Safety-conscious with a methodical approach, • Good communication and record-keeping skills, • Physically fit and comfortable with manual work Interested? If youre ready to take the next step in your career and join a company that values craftsmanship and reliability, wed love to hear from you. Apply Now! JBRP1_UKTJ