Trabajos mechanical en WorcesterCrear alertas

RESIDENT - MECHANICAL (TRADES AND LABOUR) Carbon60 is looking to recruit Mechanical Engineers to carry out both planned preventative maintenance (PPM) and reactive duties across mechanical systems within Worcestershire Royal Hospital. ROLE: Resident - Mechanical (Trades and Labour) PAY RATE: £17.00/per hour CONTRACT TYPE: 3 Months (27th October 2025 – 31st January 2026) LOCATION: Worcestershire Royal Hospital THE ROLE: Perform planned preventative maintenance (PPM) and reactive duties across mechanical systems, ensuring all plant operates safely and efficiently. Work will include Steam boilers, clarifiers, Med Gas systems, general heating systems, and Air Handling Units (AHUs). Ensure all work complies with site schedules, safety, and quality standards. Maintain accurate site logbooks and records of maintenance, inspections, and test results. Provide technical support in emergency situations to maintain operational continuity. Supervise and coordinate with other engineering staff as required. ESSENTIAL REQUIREMENTS: Proven experience as a Mechanical Engineer in a similar environment. Capable of performing both reactive and preventative maintenance duties. Strong knowledge of hospital mechanical systems including Steam boilers, AHUs, Med Gas systems, and general heating. Competent in health and safety practices and statutory compliance. Strong communication and reporting skills.

Our client, a specialist manufacturer who offers a unique combination of experience and ability in all aspects of engine, transmission, component and vehicle testing, has just made available a Permanent opportunity for a Commissioning Engineer to join their team based in Worcester. The Commissioning Engineer role is one which is predominantly site based on various clients sites throughout the UK and act as the person responsible for the safe and successful handover of systems to customers on site. Key Responsibilities of the Commissioning Engineer • Installation of HW / SW on site, • Commissioning on Customer sites - Ranging from small upgrades to full facility installation and Commissioning, • Customer Support remote and on Customer sites, • Fault finding/diagnosis of Hardware and Automation Software, • In House HW Test, • In house SW Test, • Programming of PLC's, • Customer Training at customer facilities. Qualifications and Experience Required for the Commissioning Engineer role • Solid understanding of Control SW/logic, • Solid understanding of Mechanical/Electrical installations and fault finding, • Experience of Electrical Commissioning, • Experience with Pneumatics Commissioning, • Experience with Hydraulics Commissioning, • Full driving licence and Passport, • Experience of PLC Commissioning, • Significant travel possibilities including UK and International, • Experience in Powertrain/Engine Testing - BENEFICAIL NOT ESSENTIAL

Precision-led engineering meets hands-on problem-solving in this Worcester-based Mechanical Design Engineer role. You’ll join a high-performing team developing next-gen consumer products, with ownership from concept to tooling release. £45,000 to £50,000 salary, hybrid structure, and the chance to shape how design excellence scales in a growing team. Scope of the Role: As a Mechanical Design Engineer, you’ll take the lead on end-to-end product development, solving complex technical challenges through precise design execution. • Develop robust, manufacturable mechanical designs for consumer products using SolidWorks., • Own CAD modelling, assemblies, and surface modelling to production-ready standards., • Collaborate closely with electronics, industrial design, and manufacturing teams., • Apply DFM and injection moulding expertise to ensure smooth tooling release., • Support prototype testing, iteration, and validation with high attention to detail. Key Skills and Experience Required: • Proven experience as a Mechanical Design Engineer, Product Design Engineer or Mechanical Engineer in consumer products., • Hands-on experience with SolidWorks design (assemblies, surfacing, detailing)., • Degree in Mechanical Engineering or a closely aligned discipline., • Advanced knowledge of injection moulding and design for manufacture principles., • Comfortable working in a fast-paced, iterative environment with hybrid flexibility. Salary and Benefits: • £45,000 to £50,000 basic salary, depending on experience., • Hybrid setup: 2 days a week, onsite in Worcester., • Influence how a six-strong design team evolves as new projects launch., • Weekly team check-ins and open, cross-functional collaboration., • Fast-moving, technically focused environment with maximum ownership and minimal red tape. This Mechanical Design Engineer role sits within a high-accountability, low-ego team that values technical depth, collaboration, and clarity. You'll be working alongside experienced engineers who genuinely enjoy their craft and aren’t afraid to challenge norms. There's zero fluff here, just a shared commitment to building quality consumer products and a culture that values accuracy, consistency, and craft. How to Apply: Want to find out more? Click the apply button, and we’ll be in touch.

Position: Mechanical Design Engineer (SolidWorks) Location: Worcester, Worcestershire, UK Salary: £45K - £55K depending on experience Contract: Permanent Industry: Aerospace, Automotive & Marine (High Speed Rotating Equipment) PRS Engineering has engaged with a key client and a leading manufacturer of full turnkey solutions and Test Equipment delivered to prestigious manufacturer’s worldwide within industries such as Aerospace, Automotive/Motorsport & Marine. Due to team expansion and successfully winning new business, we are seeking an experienced Mechanical Design Engineer on a permanent basis in which you will be involved in exciting projects and support some of the worlds well known and A-listed manufacturers. Ideally you will have a background of rotating equipment; such as, compressors, turbines, pumps, motors, engine test equipment and/or machinery that operates through rotational motion. Job Overview We are looking for a creative Mechanical Engineer to work on all product stages from research and development to design and manufacture, through to installation and final commissioning. The goal is to design and engineer dynamometer and related system mechanical components of innovation and excellence. Responsibilities • Perform a full lifecycle product development (design, develop, test prototypes, manufacture and implement), • Design and provide drawings for systems and components that meet needs and requirements, • Confirms system and product capabilities by designing feasibility and testing methods; testing properties., • Develops manufacturing processes by designing and modifying equipment for fabricating, building, assembling, and installing components., • Supports the Production and Commissioning Departments during equipment build and installation., • Assures system and product quality by designing testing methods; testing finished- product and system capabilities; confirming fabrication, assembly, and installation processes., • Maintains professional and technical knowledge by attending educational workshops; reviewing professional publications; establishing personal networks; participating in professional societies., • Test and evaluate theoretical designs, • Identify, formulate and produce effective solutions to emerging problems, • Evaluate final product’s overall performance, reliability and safety, • Alter and modify design to meet requirements and to eliminate malfunctions, • Prepare product reports and documentation including but not limited to operational manuals, produce specifications, etc., • Engage in lifelong learning and develop new theories or methods, • Contributes to team effort by accomplishing related results as needed. General Statement The above is not an exhaustive list of duties and responsibilities, and you may be expected to perform different tasks as necessitated by changing roles and the overall business objectives. Requirements • Preferably 5 years proven working experience in mechanical engineering, • Working experience with product lifecycle management (PLM), finite element analysis (FEA) and computational fluid dynamics (CFD), • Hands-on experience with computer-aided engineering (CAM) and computer-aided manufacturing (CAE), • Experience with 2D or 3D engineering design and manufacturing tools. Preferably Solid Works (e.g., AutoCAD or other), • Adequate knowledge of engineering analysis tools (ANSYS, ProMechanica or similar), • Mathematical computing and analysis tools knowledge (MATLAB, Excel, LabView etc), • Solid understanding of core concepts including mechanics, kinematics, thermodynamics, materials science etc., • Creativity and analytical skills, • Ability to communicate technical knowledge in a clear and understandable manner, • Strong technical writing skills, • Manufacturing experience preferred, • Dynamometer engineering experienced preferred, • BSME degree Benefits • 25 Days Plus Bank Holidays. Bank Holidays • Pension, Company Benefits and 36.75 hour week (Mon-Thurs - 08:00am-16:30pm Fri 0800am-12:45pm).

The vacancy Contract: Permanent Hours: 40 hours per week Working within our dedicated electrical facilities team and reporting to the facilities services delivery manager, you will manage and assess key systems across communal living areas and office environments. Your focus will include emergency lighting, fire detection equipment, water hygiene checks (including legionella control), asbestos monitoring, PAT testing, specialist toilet unit maintenance, and overseeing contractor activity on site. Using Bromford's digital tools, you will keep accurate records and contribute to both planned and reactive maintenance tasks, ensuring a responsive and high-quality service for our customers and teams. Join Bromford, part of BromfordFlagship, and become part of a leading housing provider delivering community-focused services across the Midlands and South West - all backed by the scale and ambition of the BromfordFlagship group. What we're looking for • Hands-on experience in facilities maintenance or compliance-related services, • Understanding of electrical, water, fire, and asbestos safety requirements, • Customer-focused approach with a strong commitment to safety, • Organised, tech-savvy, and confident in using digital systems, • PAT Testing qualification (City & Guilds 2377), • Legionella Maintenance/Management certificate, • BS 5389-1 Fire System Maintenance qualification, • Basic Electrical Maintenance training, • Asbestos Duty to Manage (DTM01), • Facilities maintenance qualification, • Portable fire extinguisher servicing qualification, • A Basic DBS check is required (arranged by Bromford), • Full UK driving licence, • Company-provided equipment: Van, mobile phone, fuel card, and uniform for business use, • Annual leave: 27 days per year, plus bank holidays, with an option to buy or sell up to 5 days, • Pension options: Choose from two pension schemes, with employer contributions of up to 10%, • Personal benefits fund: £500 annual allowance for benefits such as private medical insurance, dental treatment, critical illness cover, or gym membership, • Health and wellbeing services: Free access to 24/7 GP services, counselling, legal advice, and more, • Retail discounts: Save money on groceries, clothing, electronics, and more We are committed to creating a workplace where everyone feels valued, supported, and able to thrive. Wherever possible, we offer flexible working arrangements to help you balance your work and personal life, alongside the tools, training, and opportunities you need to develop and succeed in your career. Closing date for applications: 2nd December 2025 Please apply early, as we may close the vacancy early if we receive a high volume of applications. If you have any questions or need assistance, please contact Natalie Sayer, Resourcing and Talent Specialist, at . About us We're part of one of the biggest housing associations in the country, Bromford Flagship . As Bromford, our purpose is simple and honest: we invest in homes and relationships so that people can thrive. We provide over 47,000 homes in the West Midlands and West of England; we have relationships with more than 112,000 customers; we have a strong balance sheet and we plan to deliver 11,000 more homes by 2032. But we're only just getting started. Through place-based working, our people build progress from the ground up. You'll find us at the heart of the communities we serve, forging stronger neighbourhood relationships, reacting faster to shifting needs, and planning smarter. And we've created a thriving place of our own - giving brilliant people like you the tools and opportunities to build a future. With development that helps you grow in your role, build future-ready skills, and perform at your best. All within a vibrant and inclusive culture guided by our DNA (). We're a place for people determined to make a difference. Bromford. A place to make your own. Diversity Statement We are committed to recruiting, developing and retaining colleagues who are representative of the diverse communities we work with. This commitment is embedded in our DNA, and we are striving to build an inclusive workplace culture where all colleagues feel valued and respected, and individuality is celebrated. We are a proud "Disability Confident" (Level 2) and Menopause Friendly employer and have signed the Armed Forces covenant to support those who serve. We encourage people from all sections of our community to apply for jobs with us. Particularly, we welcome those who have been historically underrepresented in areas of our workforce including people from ethnic minority backgrounds, disabled people, women, and members of the LGBTQIA+ community. Great Place To Work Certified Bromford have once again been certified as a Great Place To Work (Nov 24 - Nov 25). The 2024 Great Place to Work Trust Index Survey highlighted that our employees believe we have an amazing company culture and that 91% of our employees were made to feel welcome when they joined us. We are also proud to have been named as one of the UK's Best Workplaces for Women for two years running (2023 and 2024) demonstrating that all colleagues, regardless of gender, can thrive at Bromford.

Were looking for a skilled and motivated Maintenance Engineer to support the smooth and safe operation of modern production lines. Youll play an important role in ensuring equipment reliability and optimising the manufacturing process within a fast-paced food production environment. As a Maintenance Engineer, youll provide both reactive and proactive maintenance support, diagnose faults, and contribute to continuous improvement initiatives that enhance performance, safety and efficiency. Key Responsibilities Work safely at all times, following company health, safety and hygiene standards. Complete planned preventive maintenance to schedule, documenting all work accurately. Respond quickly to breakdowns, identifying root causes and implementing effective repairs. Support the Maintenance Coordinator in achieving departmental objectives. Carry out electrical and mechanical fault-finding, ensuring minimal downtime. Participate in improvement projects and suggest solutions to reduce waste and increase productivity. Ensure compliance with site procedures, permits to work and contractor management processes. Maintain knowledge of PLC systems, pneumatic controls, and automation technologies. Provide technical support to other engineers and production staff. About You Qualified to ONC / City & Guilds / NVQ Level 3 (electrical and/or mechanical engineering). Proven experience as a Maintenance Engineer within a manufacturing or processing environment (food industry preferred). Strong problem-solving, diagnostic and fault-finding abilities. Why Join Us? Opportunities for ongoing training and personal development. Be part of a supportive, skilled engineering team that values collaboration and innovation. Gain experience across a variety of equipment, systems and technologies. If youre a Maintenance Engineer who thrives on solving problems, improving performance and ensuring production lines run at their best, wed love to hear from you. TPBN1_UKTJ

Injection Moulding Setter Worcestershire Permanent - Rotating Shift Salary - Competitive DOE A well-established, privately-owned UK manufacturer specialising in plastic and composite components is seeking a skilled Injection Moulding Setter to join its growing production team. This company is a market leader in contract manufacturing, supplying critical components to sectors including automotive, aerospace, medical, building products, and more. future. Key Responsibilities: Set, condition, and optimise injection moulding machines Complete tool changes, including preparation, cleaning, and material setup Programme and adjust robots and automation cells Operate and maintain ancillary equipment (dryers, temperature controllers, etc.) Fault-find and resolve issues in production processes Support production staff with training and First-Off approvals Maintain accurate production records and documentation (OEE, tool change sheets, logs) Ensure a clean and organised working environment in line with 5S standards Contribute to continuous improvement and cost-efficiency initiatives Conduct clear and thorough shift handovers Qualifications/experience Experienced working in modern injection moulding environments IMT Level 3 qualified (or equivalent) - preferred Skilled in troubleshooting and adjusting moulding conditions Able to coach apprentices and support junior colleagues Confident communicator and effective team player IT literate - comfortable with both paper-based and digital reporting Motivated, proactive, and improvement-focused Good knowledge of plastic materials and handling processes 40 hours per week on rotating shifts Benefits: 25 days holiday + 8 bank holidays Defined contribution pension scheme Life assurance cover Ongoing training including forklift, crane, first aid, etc. Opportunity to work with new automation and tooling technology Company-provided workwear and PPE For further details, please contact Kieren Provis on 01453 829776, or email Omega Resource Group is an employment agency specialising in opportunities at all levels within the Engineering, Aerospace, Automotive, Electronics, Defence, Scientific, Oil & Gas, Construction, and Manufacturing sectors. We are always seeking Engineering Staff, Senior Managers, Skilled and Semi-Skilled Machinists, Mechanical Fitters, Electrical Fitters, Quality Engineers, Materials Science Engineers, Maintenance Engineers, Electronics Engineers, Test Technicians, Technical Authors, and Laboratory Technicians to name but a few. For details of other opportunities available within your chosen field, please visit our website: Omega is an employment agency specialising in opportunities at all levels within the Engineering, Manufacturing, Aerospace, Automotive, Electronics, Defence, Scientific, Energy & Renewables and Tech sectors. TPBN1_UKTJ

Field Service Engineer, Medical Diagostic Systems Basic Salary Up To £48,000 Car Allowance £8,500 Bonus £4,000 Healthcare Pension Full Product Training Pathology Laboratory / Medical Diagnostics Analysers The Role - Field Service Engineer, Medical Diagostic Systems Following expansion, they seek to recruit a technically motivated and customer focused Field Service Engineer responsible for: The service and breakdown repair on a wide range of sophisticated medical and laboratory diagnostics systems, utilised within pathology departments, NHS laboratories and clinical chemistry environments Visiting customer sites and provide customers with valuable solutions for troubleshooting Liaising with a whole host of external customer contacts, including laboratory managers and laboratory technicians from within the NHS and a range of private independent scientific organisations and laboratories Your Background - Field Service Engineer, Medical Diagostic Systems To succeed in this exciting role, you must be able to demonstrate: A competent background as a field service engineer or technical support engineer with extensive experience working on high value capital equipment and a qualification in electronics You may have experience of working on diagnostic systems, medical devices, laboratory systems, scientific equipment, pharmaceutical, semiconductor, pre-press, printing or high value electronic / electro-mechanical capital equipment Full product training will be provided, so whatever your background in field service and customer support, your application will be considered The Company - Field Service Engineer, Medical Diagostic Systems My client is part of one of the largest medical and laboratory equipment suppliers in the world This instantly recognisable brand leader supplies a wide range of innovative diagnostic based laboratory systems to the healthcare sector and offers 'best in class' solutions across their range of products and systems Supported by a truly multi-national 'blue-chip' technology group, their commitment to investment in research and development is second to none in their industry, ensuring that they remain a market leader At the core of their business lie product innovation, excellent customer service and good people This vacancy is being advertised by TRS Consulting. The services advertised by TRS Consulting are those of an employment agency and / or employment business. TPBN1_UKTJ

Job Introduction Due to continuing growth, we are recruiting for a Diagnostic Vehicle Technician to join Listers Audi Worcester. The hours of work are Monday to Friday, 8:30am to 5pm including 1 in 4 Saturdays. We offer industry leading basic salaries & bonus and are reflective of each applicant's experience and skillset. Basic Salary up to £37,000 with OTE up to £42,000 plus benefits. As a Diagnostic Technician at Listers, you will be at the forefront of utilising our state of the art systems to diagnose and troubleshoot technical issues with Land Rover vehicles. Your expertise will play a crucial role in ensuring the optimal performance of our customers vehicles, providing outstanding customer support, and collaborating with different departments across the business to achieve goals. Our well-equipped and modern facilities provide a professional environment for our staff whilst delivering a seamless service to our customers. Our team members are rewarded for their individual contribution, customer satisfaction and for overall team performance. We also offer outstanding development opportunities, with ongoing training provided to help you reach your full potential as a Land Rover Qualified Technician or Master Technician. For more information or an informal chat, you can call 07793 314819to speak to a member of the recruitment team or just click apply. Role and Responsibilities Our technicians are responsible for the servicing, repair and diagnostics of all vehicles in the workshop, ensuring that all work is carried out to the highest standard first time. The main responsibilities would include electrical and mechanical repairs, including suspension, steering, brakes, wheel bearings, driveshafts, exhausts and air conditioning servicing. Additional responsibilities may include repairs and maintenance on EV and Hybrid vehicles such as the use of electronic diagnostic equipment, focusing on areas such as batteries, drive motor, auxiliary drive pack & control systems. You will have the ability to fit manufacturer accessories and audio equipment. You will have a full understanding of Customer Satisfaction and its impact on the business. You will be trained and able to operate additional systems, such as video reporting i.e CitNOW. You also will be able to complete all service paperwork to manufacturer and brand standards. Working closely with other members of the workshop team to constantly learn and share knowledge. About you We consider candidates from all backgrounds who have experience working in the Automotive sector as a Vehicle Technician, Mechanic, HGV Mechanic, HGV Technician, Motor Mechanic, Motor Vehicle Technician, Car Mechanic, HGV Fitter, Auto Electrician, MOT Tester or Apprentice Vehicle Technician to join Listers. Whether you work at an independent garage, fast fit centre, car supermarket or main dealer, we would be interested in talking to you. As a minimum you will hold or working towards completion of your NVQ Level 3 or equivalent qualification in Vehicle Maintenance and Repair. An Electric and Hybrid vehicle qualification or certification would be advantageous but not essential as full training will be provided. MOT License would also be beneficial but not essential. Full UK Driving licence. As long as you can demonstrate good mechanical and electrical knowledge and an ability to ensure all work is carried out to a high standard, we have the training and facilities to help you make the next big step in your career. What we offer 25 days holiday plus bank holidays Company Pension Wellness Programme Sick Pay Group life insurance Staff discount on car servicing Listers Benefits discounts on retailers, restaurants, cinemas & holidays Long service and loyalty incentives Staff referral scheme In-house, manufacturer & professional qualifications Company Events Why Listers? Founded in 1979, Listers Group stands as one of the largest privately and family-owned motor retailer groups in the UK. There's a reason why this is the case, there are over two and a half thousand reasons, our team. Since the very beginning, our success has been a product of the fantastic people that work for us. This is recognised by representing some of the world's most prestigious car brands across the Midlands, Lincolnshire, Gloucestershire, Norfolk and Yorkshire.We support employees in all areas of the business, whatever your aspirations might be, so if you are looking for a career within the motor trade, automotive or car dealership sector, then please apply today. If you are looking for similar motor trade jobs, you can also join our Talent Bank. TPBN1_UKTJ

Company description: Mller UK & Ireland is wholly owned by the Unternehmensgruppe Theo Mller which employs over 24,000 people throughout Europe. In the UK, Mller develops, manufactures and markets a wide range of branded and private label dairy products made with milk from more than 1,700 British farmers. The Mller brand is ranked at No.7 in The Grocers Top 100 list of Britains Biggest Brands, and is also the 7th most chosen brand in the UK. Job description: We are recruiting Engineering Apprentices! At Mller UK & Ireland were proud to create some of the nations favourite dairy products, from fresh milk, butter, and cream to our famous yogurts, desserts, drinks and kefir. Sourcing milk from over 1,000 farms up and down the UK, we serve millions of families every day with a range of branded and private label goods which are nutritious and delicious. Were one of the UK and Irelands major dairy manufacturers and, with milk in 97% of UK fridges and yogurt in 78%, theres a very good chance you have a Mller product in yours. About the role Where will this career journey take you? This is an exciting opportunity to join Mller Milk & Ingredients at our Droitwich site in an apprenticeship role as an Engineering Technician. We have ambitious plans in place to grow our business and transform the dairy industry. To meet those goals, we need people who can grow with us. You will study towards a recognised qualification, earn a good salary, develop new skills, and gain invaluable experience. We aim to empower our employees to be the best they can be at Mller the skys the limit. Your key responsibilities as an Engineering Apprentice will include: Asset Management: keeping Manufacturing machinery maintained, managing processes, filling/packing, and site cleaning operations Involvement in Continuous Improvement projects, project management, or tests and trial activities Fault finding and quick action to meet food safety standards Being part of a team striving to achieve the highest quality products Highlighting concerns and ensuring products or volumes meet the agreed requirements and targets This Apprenticeship combines technical training, academic study, and work-based learning, and covers all the fundamental Engineering topics you need to know, such as: Electrical principles and maintenance Mechanical maintenance to keep the factories running efficiently Automation This programme is delivered in partnership with our training provider, North West Training Council (NWTC), where youll spend 20 weeks of your first year with Mller at their state-of-the-art training facility. From years 2 4, youll spend a combined 22 weeks with NWTC, with the remainder of the time spent back at Droitwich site to embed your learning with our team of Engineering experts, whilst continuing to work with our training provider partner to complete your apprenticeship. What will you need? You will need to meet the following entry requirements: National 5s at band C or above in English & Maths, plus a science/technical subject Able to demonstrate a clear passion for Engineering Ability to take ownership of own work Demonstrates a self-motivated and proactive approach to work and studies Youll need to be flexible with your hours of work upon completion of the apprenticeship including weekends and night shifts Mller offers you a long term career with a genuine market leader. We're an entrepreneurial company where people love to work and make a difference. This role is likely for you if youre committed to fulfilling your potential and becoming a highly prized Engineer with an industry-recognised qualification. What to Expect? At the end of the Apprenticeship programme, you will gain the following qualifications: Level 3 Food & Drink Maintenance Engineer Apprenticeship Certificate Level 3 Diploma in Food & Drink Engineering There is also the potential to progress onto a Level 6 Engineering Degree if you show the drive and enthusiasm! You will also benefit from: An annual salary of £18,500 with structured increases yearly A full time role of 40 hours per week Were committed to building a diverse and inclusive workplace. At Mller, we welcome applications from people of all backgrounds, experiences, and abilities. If youre passionate, curious, and ready to learn well support you every step of the way. TPBN1_UKTJ

? Maintenance Team Leader - FMCG Location: Droitwich Salary: £60,000 per annum Shift Pattern: 4 on 4 off - Days Only (No nights!) Industry: Fast-Moving Consumer Goods (FMCG) Type: Permanent, Full-Time About the Role We're looking for an experienced and hands-on Maintenance Team Leader to join a high-performance engineering team within a fast-paced FMCG manufacturing facility based in Droitwich . You'll play a key role in leading a team of engineers to ensure maximum uptime across all production and packaging equipment, driving continuous improvement and ensuring high standards of safety, compliance, and performance. Key Responsibilities Lead, motivate, and support a team of multi-skilled engineers on shift Ensure effective execution of planned, preventative, and reactive maintenance tasks Prioritise and manage breakdowns to minimise downtime Collaborate with production and operations teams to improve OEE and reliability Maintain and enforce health & safety and compliance standards Support training and development of team members Monitor performance data and drive continuous improvement initiatives Support site projects, installations, and commissioning activities What We're Looking For Proven experience in a supervisory or team leader role within a maintenance or engineering environment Strong background in FMCG , food manufacturing , or similar high-speed production industries Excellent knowledge of mechanical and electrical maintenance , fault finding, and PPM Experience with automation systems , conveyors , packaging lines , and PLC fault diagnosis Strong leadership, communication, and problem-solving skills Relevant engineering qualifications (e.g. NVQ Level 3, HNC, or equivalent) If you are interested in this role and feel that you have the right skills then please click apply at the bottom of this advert. For further details contact Kieran Wall at Pioneer Selection As a registered candidate with Pioneer Selection Ltd, you automatically become eligible for our referral scheme. You will receive £250 for every candidate we place in permanent employment who has been recommended by you. Terms and Conditions apply please see our website for further details. TPBN1_UKTJ

Mobile Maintenance Engineer (Training on CNC Equipment) £30,000 - £35,000 + Full CNC Machinery Training + Door to Door + Van (Personal Use) + 33 Days Holiday + Career Progression Home Based, Ideally based in Coventry, Birmingham, Leicester, Worcester, Northampton, Nottingham, Derby, Luton and surrounding areas Are you an Aspiring Field Service Engineer with any mechanical or electrical background lo...

Field Service Engineer (Electrical Machinery Training) £30,000 - £35,000 + Full CNC Machinery Training + Door to Door + Van (Personal Use) + 33 Days Holiday + Career Progression Home Based, Ideally based in Coventry, Birmingham, Leicester, Worcester, Northampton, Nottingham, Derby, Luton and surrounding areas Are you an Aspiring Field Service Engineer with any mechanical or electrical background loo...

Mechanical Design Engineer (Progress to Product Manager) £35,000 - £45,000 + Full Product Training + Career Progression + Company Benefits Office Based, Commutable from Hereford, Ross-on-Wye, Worcester, Leominster, Gloucester, Tewkesbury and surrounding areas Are you a Mechanical Engineer, Design Engineer, Compliance Engineer or aspiring Product Manager looking to further your career and become recog...

Job Introduction Due to continuing growth, we are recruiting for aVehicle Technician to join Listers Audi Worcester.Read all the information about this opportunity carefully, then use the application button below to send your CV and application.The hours of work are Monday to Friday, 8:30am to 5pm including 1 in 4 Saturdays.We offer industry leading basic salaries & bonus and are reflective of each applicants experience and skillset.Basic Salary between £30,000- £37,000 with OTE up to £42,000 plus benefits.As a Technician at Listers, you will be at the forefront of utilising our state of the art systems to diagnose and troubleshoot technical issues with all vehicles.Your expertise will play a crucial role in ensuring the optimal performance of our customers vehicles, providing outstanding customer support, and collaborating with different departments across the business to achieve goals.Our well-equipped and modern facilities provide a professional environment for our staff whilst delivering a seamless service to our customers.Our team members are rewarded for their individual contribution, customer satisfaction and for overall team performance.We also offer outstanding development opportunities, with ongoing training provided to help you reach your full potential as a Audi Qualified Technician or Master Technician.For more information or an informal chat, you can call 07793 314819to speak to a member of the recruitment team or just click apply.Role and Responsibilities Our technicians are responsible for the servicing, repair and diagnostics of all vehicles in the workshop, ensuring that all work is carried out to the highest standard first time.The main responsibilities would include electrical and mechanical repairs, including suspension, steering, brakes, wheel bearings, driveshafts, exhausts and air conditioning servicing.Additional responsibilities may include repairs and maintenance on EV and Hybrid vehicles such as the use of electronic diagnostic equipment, focusing on areas such as batteries, drive motor, auxiliary drive pack & control systems.You will have the ability to fit manufacturer accessories and audio equipment.You will have a full understanding of Customer Satisfaction and its impact on the business.You will be trained and able to operate additional systems, such as video reporting i.e CitNOW.You also will be able to complete all service paperwork to manufacturer and brand standards.Working closely with other members of the workshop team to constantly learn and share knowledge.About you We consider candidates from all backgrounds who have experience working in the Automotive sector as a Vehicle Technician, Mechanic, HGV Mechanic, HGV Technician, Motor Mechanic, Motor Vehicle Technician, Car Mechanic, HGV Fitter, Auto Electrician, MOT Tester or Apprentice Vehicle Technician to join Listers.Whether you work at an independent garage, fast fit centre, car supermarket or main dealer, we would be interested in talking to you.As a minimum you will hold or working towards completion of your NVQ Level 3 or equivalent qualification in Vehicle Maintenance and Repair.An Electric and Hybrid vehicle qualification or certification would be advantageous but not essential as full training will be provided.MOT License would also be beneficial but not essential.Full UK Driving licence.As long as you can demonstrate good mechanical and electrical knowledge and an ability to ensure all work is carried out to a high standard, we have the training and facilities to help you make the next big step in your career.What we offer 25 days holiday plus bank holidays Company Pension Wellness Programme Sick Pay Group life insurance Staff discount on car servicing Listers Benefits discounts on retailers, restaurants, cinemas & holidays Long service and loyalty incentives Staff referral scheme In-house, manufacturer & professional qualifications Company Events Why Listers? Founded in 1979, Listers Group stands as one of the largest privately and family-owned motor retailer groups in the UK.Theres a reason why this is the case, there are over two and a half thousand reasons, our team.Since the very beginning, our success has been a product of the fantastic people that work for us.This is recognised by representing some of the worlds most prestigious car brands across the Midlands, Lincolnshire, Gloucestershire, Norfolk and Yorkshire.We support employees in all areas of the business, whatever your aspirations might be, so if you are looking for a career within the motor trade, automotive or car dealership sector, then please apply today.If you are looking for similar motor trade jobs, you can also join our Talent Bank.d02fcfcb-6df4-40ee-95cf-3eb059ce3173