Software test engineer jobs in EsherCreate job alerts

Drumgrange is seeking an experienced and collaborative Electronics Test Engineer to join our inclusive team. This Electronics Test Engineer role is based in Chertsey on a 37.5 hr per week contract for 6mths. As an experienced Electronics Technician, you will support our skilled engineering and manufacturing teams to supply high-quality products and systems to the Defence Industry. The successful candidate will be experienced in production inspection, testing and fault finding for electronic modules, units, systems and spares. The role is created to meet deadlines on a high-profile project which requires time management and strong communication. Reporting to: Functional Lead What you’ll do In the Electronics Technician role, you can expect to: • Perform IPC-level inspections of electronic assemblies before the test or as part of the production cycle, • Execute formal test documentation, including recording of results—hardware, software and firmware programme configuration, • Ensure all H&S requirements are met, and the assembly area is maintained as a safe, clean and tidy working environment, • Responsible for maintaining a high quality of work to deadlines provided by the business, • Responsible for recording details of defects found, • Responsible for adhering to the company’s policies and procedures, • Take measurements using common range test equipment, • Provide feedback for test documentation discrepancies, • Become familiar with the operating system and timely record all results and keep an up-to-date narrative What you’ll need To apply for this role you will need • Previous experience working on Defence projects,, • IPC level inspection certification,, • BTEC Electronics qualification (ONC/HNC/HND) or equivalent. You will also require the following: • Broad experience in using test equipment, including digital oscilloscopes, Spectrum Analysers, Function Generators, Multimeters and Power Supplies, • Ability to maintain several production test and reference facilities, • Experienced in problem-solving, fault finding and repair down to the component level for analogue and digital designs, • Familiarity with Microsoft Office products, • SC Cleared, • Previous experience in a manufacturing environment, • Previous experience working to high standards against deadlines, • Previous experience dealing directly with engineering teams Key Must Have skills: (minimum of 5) • Ability to obtain UK security clearance, • Minimum of 3 years’ experience in a technical test role., • Advanced technical experience in manual testing.., • Proficient with use of hand tools and test equipment., • Ability to read and understand electronic and mechanical drawings., • Knowledge of electronic Components., • Ability to create detailed documents against specifications and drawings, • A basic understanding of electrical & electronics requirements., • Strong communication skills, • Good at multi-tasking, • Computer proficient with office 365 and the ability to pick up software programmes quickly., • Self-motivated and able to work independently with minimal supervision, • An enthusiastic self- starter who wishes to learn, develop and progress., • A basic understanding of electrical & electronics requirements., • Strong communication skills, • Good at multi-tasking, • Computer proficient with office 365 and the ability to pick up software programmes quickly., • Self-motivated and able to work independently with minimal supervision, • An enthusiastic self- starter who wishes to learn, develop and progress. Key Nice to Have skills: • Advanced rework skills down to component level, track repair, • Fault finding down to component level, • Understanding of circuit diagrams, • Out the box approach to problem solving

We are looking for an experienced and enthusiastic Contract Systems Engineer to assist our growing Systems function to undertake Systems Integration for projects in our Maritime sector. You will take a lead role in the integration of a complex sonar system upgrade involving specialist sensors, electronics and signal processing firmware and software. Taking an active role that spans the right-hand side of the “V” systems development lifecycle, you will be involved in planning and executing system integration & test activities, system and sub-system qualification and configuration as well as design data pack updates, and will help gain customer acceptance ensuring all capability requirements are met. This will involve generating and reviewing system integration and test documentation or equipment, hands on involvement with system integration and qualification, and participation in key meetings and user acceptance events. If you would like the opportunity to work at one of the most adaptable and reactive engineering companies within the UK defence sector, we’d love to hear from you. Reporting to: Project Manager What you’ll do • Undertake system integration activities through all phases of test, integration and leading to customer acceptance., • Develop and review technical documentation to support the project deliverables, including test specifications, procedures and reports., • Undertake testing, integration and qualification activities including fault finding., • Identify project technical risks and opportunities., • Liaise with the hardware, software and firmware engineering development teams to ensure that the system achieves the operational performance requirements and any faults are dealt with efficiently and swiftly., • Involvement with acceptance events at factory and external sites., • Involvement in the safety, reliability and the planning for through-life support of products., • Work with external test houses to demonstrate equipment complies with MoD and European standards, including CE/UKCA marking., • Comply with all health and safety requirements and safe practices and procedures operated by the company., • Assist with design data pack updates (e.g. Bill of Materials, schematics and Change Notes), and configuration in accordance with company procedures., • Foster good working relationships with suppliers and customers. What you’ll need • Experience delivering aspects of system test and integration, preferably in the defence domain., • Awareness of the system lifecycle, design, development, testing, integration and acceptance., • The ability to analyse and evidence system acceptance requirements, including from product qualification testing., • Ability to produce high quality technical documentation including test reports and verification evidence., • Appreciation of electronics, and software/firmware design principles to assist with fault finding., • Have a high level of both verbal and written communication skills providing regular communication to internal and external stakeholders, customers, and suppliers., • Ability to multi-task and prioritise workload with a hands-on approach., • Ability to work with internal and external stakeholders to develop solutions., • Degree educated or equivalent qualification/experience., • At least a BSc Degree in Engineering, Maths or Science subject or equivalent experience., • Current, valid, SC UK security clearance is essential., • Sole UK Nationality is preferred but not essential., • Previous experience working with MoD customers & equipment test standards is desirable., • This role is office based at Drumgrange Chertsey but may involve travel to customer and supplier sites.

We are looking for a seasoned Systems Integration Engineer for a long term contract outside IR35 to take a lead role in a high-impact sonar system upgrade. This isn't just a "process" role; you will be the technical glue on the right-hand side of the V-Model, driving the integration of complex sensors, signal processing firmware, and bespoke software for the UK’s maritime defense sector. As a key link between the design team and the customer, you will ensure that cutting-edge naval technology transitions from the lab to successful field acceptance. The Role • Drive Integration: Lead the system and sub-system integration phases, ensuring hardware and software work in perfect harmony., • Test & Qualify: Execute hands-on testing and qualification, working closely with external test houses to meet MoD and European standards (CE/UKCA)., • Problem Solve: Act as the primary technical point of contact for fault finding and defect resolution across firmware and electronics., • Document Excellence: Produce high-quality test specifications, procedures, and V&V reports that satisfy stringent customer requirements., • Stakeholder Liaison: Bridge the gap between engineering teams, Project Managers, and MoD stakeholders to ensure smooth delivery. What You’ll Need • Defense Pedigree: Proven experience in system test and integration within a defense or aerospace environment., • Technical Depth: A strong appreciation of electronics and software/firmware design—you know how to debug complex systems, not just report on them., • V-Model Mastery: Deep understanding of the systems lifecycle, specifically verification, validation, and customer acceptance., • Compliance Knowledge: Experience with equipment test standards and product qualification testing., • Security: Current UK SC Clearance is mandatory. Due to the nature of the projects, Sole UK Nationality is highly preferred. Security & Eligibility • UK National dual nationality acceptable providing one nationality is UK, • SC Cleared, • Background working within a MOD / Defence environment, • Role subject to security and export control restrictions Working Arrangements • Fully on-site role (South East England), • Either:, • 5 days per week (37.5 hours), • Compressed 5 days across 4 days (longer on-site hours) Contract Details • Outside IR35 Why Join? You’ll be joining a technically focused defence engineering environment with a flat structure, real ownership, and exposure across the full product lifecycle. This role offers meaningful work on critical programmes, variety across projects, and the chance to make a tangible impact without excessive bureaucracy.

Entity: Production & Operations Job Family Group: Wells Group Job Description: Our purpose is to deliver energy to the world, today and tomorrow. For over 100 years, bp has focused on discovering, developing, and producing oil and gas in the nations where we operate. We are one of the few companies globally that can provide governments and customers with an integrated energy offering. Delivering our strategy sustainably is fundamental to achieving our ambition to be a net zero company by 2050 or sooner. We are now looking for the Senior Completion Engineer to join our Wells Global Concept Development and NOJV team! From one of our hub locations in either the US or Sunbury, you will be supporting bp's world-wide regional teams in successfully developing capitally efficient and inherently safe well concepts and full field development strategies across bp’s global portfolio. In this position, you will manage high degrees of uncertainty and support senior stakeholders in making business decisions. * Strong safety leadership that reflects bp’s values. Ensure all well construction activities align with bp’s Operating Management System, Engineering Practices, basis of design, and applicable regulatory requirements. * Engineering and design work—including contingencies—on time and in alignment with bp’s Engineering Practices and OMS, including applying for deviations where appropriate. * Ensure adherence to Equipment Integrity Assurance Guidelines and Supply Chain processes, including planning for long‑lead items. * Continuously apply industry standards and technology to improve well design, execution efficiency, and cost performance. * Constructively challenge existing design assumptions and execution philosophies to unlock value and improve design robustness. * Apply wells standards, workflows, and engineering tools consistently across daily tasks and project deliverables. * Integrate well control requirements into all stages of well design and ensure well barrier documentation supports concept development. * Review completion performance against critical metrics; drive lessons learned, best practice sharing, and continuous improvement. * Lead and coordinate multi-functional workshops. * Collaborate closely with internal completions and sand control SMEs. * Act as a thought partner within the GCD and NOJV Manager, collaborating with other well engineers to provide integrated, end‑to‑end solutions to the businesses and customers we support. * Work with multidisciplinary teams to create and test well concepts, assess feasibility, and develop optimization scenarios. * Integrate with facilities and subsurface teams to drive ideation and generate development options. * Provide defendable time and cost estimates for single‑well and multi‑well scenarios. * Demonstrate a creative, concept‑challenging approach in FEL activities. * Bachelor’s degree in science, Engineering, or an equivalent technical field. * Significant experience as a Completions Engineer (domestic and/or international). * Experience working in multi‑disciplinary teams using agile delivery methods. * Working knowledge of petrophysical inputs to completions design, including geomechanical models, tracers, and baseline evaluations across completion and stimulation types. * Ability to define and develop flow assurance strategies for preventing wax, scale, and asphaltene deposition. * Experience optimizing integrated tubing lift/reservoir models and conducting inflow performance analysis using appropriate software tools. * Ability to estimate new‑well value (incremental rate/resources, NPV), communicate risk and uncertainty, and support decision‑making with clear mitigation strategies and surveillance requirements. * Ability to identify sand control candidates and design, install, and operate sand management systems for sand‑prone reservoirs. * Experience using analogue field data to assess solids production risk, troubleshoot equipment/systems, and recommend compliant solids‑handling solutions. * Ability to evaluate scale prediction modeling and recommend appropriate prevention/removal methods specific to scale types. * Strong capability in identifying and communicating subsurface uncertainties, assumptions, and alternative scenarios, and proposing significant risk‑management strategies. * Experience using tubing‑distortion calculations and nodal analysis software for complex completion design and diagnosing well performance issues. * Ability to describe subsea well intervention requirements, outline common workover activities, and classify rig and rigless intervention types (e.g., recompletions, water shutoff). * Experience evaluating completion performance using PI, pressure‑buildup, and PTA data; recommending well work and recognizing when specialist support is required. Why join us? At bp, we support our people to grow in a diverse and exciting environment. We believe that our team is strengthened by diversity. There are many aspects of our employees’ lives that are meaningful, so we offer benefits to enable your work to fit with your life. These benefits can include flexible working options, a generous paid parental leave policy, excellent retirement benefits, among others! We will ensure that individuals with disabilities are provided reasonable accommodation to participate in the job application or interview process, to perform essential job functions, and to receive other benefits and privileges of employment. Please contact us to request accommodation. Reinvent your career as you help our business meet the challenges of the future. Apply now! Travel Requirement Up to 25% travel should be expected with this role Relocation Assistance: This role is not eligible for relocation Remote Type: This position is a hybrid of office/remote working Skills: Artificial Lift, Artificial Lift, Coiled Tubing, Common process for wells activities, Completion equipment and accessories, Completions and Interventions Fluids, Completion tubing design, Control of Work, Cost Management, Drilling, Electric-line, Equipment integrity assurance, Fracturing and stimulation, Intelligent Completions, Management of change, monitoring and maintenance, OMS and bp requirements, Perforating, PPFG and geohazard principles for wells, Process Safety Management, Rig workovers, Risk Management, selection and construction, Slickline and braided-line, Solids and Sand Management {+ 17 more} Legal Disclaimer: We are an equal opportunity employer and value diversity at our company. We do not discriminate on the basis of race, religion, color, national origin, sex, gender, gender expression, sexual orientation, age, marital status, socioeconomic status, neurodiversity/neurocognitive functioning, veteran status or disability status. Individuals with an accessibility need may request an adjustment/accommodation related to bp’s recruiting process (e.g., accessing the job application, completing required assessments, participating in telephone screenings or interviews, etc.). If you would like to request an adjustment/accommodation related to the recruitment process, please ___. If you are selected for a position and depending upon your role, your employment may be contingent upon adherence to local policy. This may include pre-placement drug screening, medical review of physical fitness for the role, and background checks.

AI Engineer Job Tenure: Full-time, permanentSalary: CompetitiveCompany Description Ready to join a team thats leading the way in reshaping the future of insurance? Here at esure Group, we are on a mission to revolutionise insurance for good! We’ve been providing Home and Motor Insurance since 2000, with over 2 million customers trusting us to keep them covered through our esure and Sheilas’ Wheels brands. With a bold dedication for digital innovation, were transforming the way the industry operates and putting customers at the heart of everything we do. Having completed our recent multi-year digital transformation, we’re now leveraging advanced technology and data-driven insights alongside exceptional service, to deliver personalised experiences that meet our customers ever-changing needs today and in the future. Job Description We currently have a phenomenal opportunity for an AI Engineer to join our us as we enhance our customer experience by harnessing the power of NLP, large language models, and flawless integration with third-party GenAI services. In this dynamic role, youll be involved in every stage of the AI lifecycle, from brainstorming ideas and crafting prompts to fine-tuning models and deploying them into production. Success in this role is measured through rigorous A/B testing, ensuring our solutions deliver real value. Youll have the opportunity to work on a variety of impactful projects across the entire enterprise. We are seeking an innovative individual who shares our vision to fix insurance for good. What you’ll do: Collaborate with business partners to identify use-cases where GenAI can provide measurable benefits. Support the data science and AI team in deploying scalable AI applications across the enterprise. Work with a multi-functional team (DevOps, data engineers, developers, testers, Infosec) to productionize AI services on AWS. Enhance our tech stack, including MLOps, CI/CD pipelines, UI, and AI Python libraries. Develop prompts, fine-tune models, and track results. Evaluate third-party GenAI and LLM technologies for cost-benefit analysis. Deliver projects from scoping and R&D to production deployment and benefit measurement. Follow and contribute to standards for code quality, R&D, and model development. Engineer data for optimal AI application performance. Advise peers and senior management on business and customer impact. Write production-grade Python code, leveraging CI/CD, Databricks, and ensuring appropriate test coverage; proficiency in SQL. Liaise with third-party partners and stay updated on field advancements and regulations. Collaborate with data governance and data management teams on data requirements. Qualifications What we’d love you to bring: You are a self-starter with experience in delivering research + models to production to drive tangible commercial benefits and improved customer experiences. You thrive in working autonomously and collaboratively to drive impact in a fast-paced multi-functional business. PhD or MSc experience in a numerate subject: Machine Learning, Computer Science, Statistics, or equivalent, Demonstrable experience of applying, researching, and developing sophisticated NLP models, prompt engineering + fine-tuning LLMs to drive value in a commercial setting, Able to work independently and efficiently to deliver projects on time, taking project briefs and refining them to strong results. Experienced in engaging with non-technical stakeholders to scope, design and build an appropriate ML solution. Proficient with Python data science stack, e.g., pandas, scikit-learn, Jupyter etc., and version control, e.g., Git. Exposure to LLMOps, model monitoring principles, CI/CD and associated tech, e.g., Docker, MLflow, k8s, FastAPI etc. Knowledge of Langchain, huggingface and LLM offerings by 3rd party vendors. Knowledge of OO programming and software design, i.e., SOLID principles. Knowledge and working experience of AGILE methodologies. Familiarity with Databricks, and RAG application architecture a plus Experience with latency optimisation and quantisation preferred Additional Information What’s in it for you?: Competitive salary that reflects your skills, experience and potential. Discretionary bonus scheme that recognises your hard work and contributions to esure’s success. 25 days annual leave, plus 8 flexible days and the ability to buy and sell further holiday. Our flexible benefits platform is loaded with perks to choose from, so you can build a personal toolkit to support your health, wellbeing, lifestyle, and finances. Company funded private medical insurance for qualifying colleagues. Fantastic discounts on our insurance products! 50% off for yourself and spouse/partner and 10% off for direct family members. We’ll elevate your career with hands-on training, mentoring, access to our exclusive academies, regular career conversations, and expert partner resources. Driving good in the world couldn’t be more important to us. Our colleagues can use 2 volunteering days per year to support their local communities. Join our internal networks and communities to connect, learn, and share ideas with likeminded colleagues. We’re a proud supporter of the ABI’s ‘Make Flexible Work’ campaign and welcome you to ask about the flexibility you need. Our hybrid working approach also puts you in the driving seat of how and where you do your best work. And much more; See a full overview of our benefits here Reward and benefits | Esure Group PLC We are committed to creating an inclusive and diverse workplace where everyone feels valued, respected, and empowered. We celebrate individuality and create spaces where unique backgrounds and experiences can come together. We believe that diverse perspectives drive innovation, in turn enabling us to better serve our customers, community and build a stronger organisation. Our commitment to inclusion extends to every part of our business, from hiring practices to professional growth opportunities, ensuring equal access and support for all.

Opportunity: Copello is partnering with a Defence client to recruit a Principal Control Systems Engineer to join their team. In this role, you will use your expertise in PLC and SCADA systems to design, develop, and support advanced control and HCI solutions for naval platform management systems. This is your chance to work on high integrity systems in a secure, highly regulated defence environment, contributing directly to operational capability and national security. What you’ll do: • Capture and interpret customer requirements, • Design, code, and test PLC control systems, • Manage data communications with third party equipment, • Develop software from design documents (Block Diagrams, Flow Charts, Pseudo Code), • Produce technical documentation, • Validate and test software designs, • Support project meetings, proposals, and change control What we’re looking for: • 5+ years’ PLC engineering experience, • Expertise in Fault Tolerant, High Availability, and Safety Integrated PLCs, • Strong knowledge of Profibus, Profinet, EtherNet/IP, ModBus, TCP/IP, UDP, ASCII, • Experience with SCADA/PLC interfacing and driver configuration, • Understanding of software lifecycles, testing, and commissioning, • Degree/HNC/HND in Electrical, Electronic, C&I, or Systems Engineering, • Experience in Defence, Maritime, Aerospace, or similar regulated industries

Electronics Engineer £55,000 – £70,000 + Benefits Cambridge – 3 days onsite per week Start date – ASAP Zenovo are recruiting for an Electronics Engineer to join an IoT company in Cambridge. This role sits at the intersection of electronic design, hardware engineering, and certification, with a strong focus on ensuring battery-powered products are engineered for use in hazardous environments. You will act as the technical authority for electronics design decisions that impact compliance approvals (ATEX, IECEx, NRTL, radio, and EMC), working closely with a variety of electronics, firmware and software engineers throughout the full product lifecycle. Role Overview As an Electronics Engineer, you will be responsible for designing, reviewing, and validating electronic hardware to meet hazardous-area and radio requirements. Rather than purely managing compliance, you will help shape circuit architecture, component selection, PCB layout, and system-level design to enable certification and safe deployment in industrial environments. You will collaborate with Engineering and Operations teams to translate standards into practical design solutions and ensure products are robust, manufacturable, and certifiable for global markets. Key Responsibilities Electronics & Hardware Engineering Act as the electronics engineer for IoT products used in hazardous environments. Review and influence schematics, PCB layouts, and component selection to meet intrinsic safety and EMC requirements Support design trade-offs related to power, thermal, RF, and protection strategies Ensure electronics designs align with IEC/EN/UL 60079-0 and 60079-11 from concept through production Certification & Engineering Validation Assist with ATEX, IECEx, NRTL, and radio certifications from an engineering perspective Work with test houses and notified bodies to define test strategies and resolve technical issues Support change control, design updates, and follow-up inspections Radio & EMC Engineering Provide technical leadership for radio and EMC compliance (ETSI, FCC, regional approvals) Coordinate test planning, pre-compliance activities, and design fixes Support antenna, layout, and RF-related design decisions Technical Documentation & Design Records Own and maintain hardware design files, technical justifications, and supporting documentation Contribute to safety and user documentation with strong technical input Maintain structured product technical files Global Product Support Support expansion into new markets (e.g. Brazil, Canada, Asia) by adapting designs to regional technical requirements Act as a point of escalation for electronics-related compliance and audit queries Skills & Experience Degree in Electronics or Electrical Engineering (or related discipline) 3+ years' experience working on electronic hardware design for regulated products Strong ability to read, review, and challenge schematics and PCB layouts Experience working with EMC, RF, and radio standards (FCC, ETSI) Nice to have - Experience designing or supporting products for ATEX / IECEx / hazardous environments TPBN1_UKTJ

Security: SC Clearance Sole UK national On-site: ~4 days/week Location: Basildon Rate: £65 per hour Umbrella - inside IR35 Our major defence client is currently looking for a Senior Mechanical Engineer to join the Precision Guidance Integrated Project Team (IPT), working on equipment for the next generation of Missile Seeker Programmes. The successful candidate will be experienced in the Aerospace and/or Defence Industry and preferably hold SC Security status. The Mechanical Engineer role offers hybrid working, with the option of on-site working at our Basildon office. The frequency of on-site visits shall be agreed with the IPT, to ensure that key Milestones and Deliverables are met on time, to budget and to the desired quality. Key Responsibility Areas • Support senior members of staff in the delivery of technical solutions on critical Business Programmes. • Generation of mechanical solutions to relevant company and international standards. • Design of engineering solutions taking into account all requirements including product quality, safety, reliability, testability, sustainability, etc. • Mechanical engineering detailed design, including numerical calculations, tolerance studies, etc. • Produce Manufacturing Data Packs in line with BS8888 including appropriate application of GD&T. • Generate BoM within approve PLM system (Teamcenter). • Contribute to reviews of Mechanical designs in accordance with business and industry standards. • Deliver design solutions against Technical Requirements, within budget and timescales. Skills, Qualifications & Knowledge Experience in: · Technical or science degree qualified, or equivalent, with experience. · Mechanical engineering for Electronic Products (including EO). · Perform ‘hands on' mechanical design and development using 3D CAD software (PTC Creo). · Structural design and an ability to carry out ‘first pass' analyses and work in conjunction with full-time Structural Analysts. · Experienced in working on Electro-Optic Products, with proven knowledge of electrical screening, grounding, opto-mechanical sub-assemblies, etc. · Detail and assembly drawing generation, in accordance with BS8888. · Numerical calculations, tolerance studies, etc. · Proven understanding of the application of materials and process finishes to meet EO Product needs. · Experienced in the design of Jigs, Fixtures and Tooling to support the Assembly, Integration and Testing of EO Products, for the Aerospace and/or Defence sector. · Ability to work within a multi-discipline IPT. · Knowledge of Cable Harness design, including Connector selection, screening, strain relief methods, etc. · Experienced in various aspects of DfX, including Manufacturing, Assembly, Test, Integration and Sustainability. · Operating in a high performing multi-disciplinary Team. Desirable: • Capable of performing ‘first pass' Thermal analyses. Intrinsic Job Factors · Full Time Hours · Tight Deadlines (regular or adhoc) · Hybrid working, with time based in Bristol office TPBN1_UKTJ

Application Security Test Engineer (DAST IAST) Cambridge / WFH to £70k Are you a security focussed Test Engineer? You could be joining a market leading software house that's remote access product is used by hundreds of millions of users worldwide. What's in it for you: Salary to £70k Bonus Hybrid working Pension, Private Medical Care, Life Assurance, Travel Insurance Subsidised gym membership and a range of other perks Your role: As an Application Security Test Engineer you'll play a key role in building security into applications, carrying out threat modelling and risk assessments during the design phase to ensure solutions are secure by default. You'll help define security requirements for new features and take part in architecture reviews to spot and address potential risks early. Working closely with development teams, you'll carry out secure code reviews and provide guidance on best practices, including alignment with CIS Critical Security Controls and the OWASP Top 10, collaborating with engineers to embed security into development workflows rather than treating it as an afterthought. You'll be hands-on with security testing across a range of environments, running Dynamic Application Security Testing (DAST) against live applications, focusing on issues such as cross-site scripting, SQL injection and broken access control. You'll also use Interactive Application Security Testing (IAST) tools for runtime analysis, including tools such as Burp Suite, OWASP ZAP and Frida, alongside Static Application Security Testing (SAST) and software composition analysis to assess source code, binaries, and third-party dependencies. Location / WFH: You can work from home most of the time, meeting up with colleagues in the Cambridge office on a weekly / monthly basis. About you: You have a strong understanding of the secure software development lifecycle and DevSecOps principles You have a good knowledge of Application Security principles and common vulnerabilities (e.g., XSS, SQL Injection, Broken Access Control) You have hands-on experience with DAST, IAST and Penetration Testing tools (e.g., Burp Suite, OWASP ZAP, Frida) and Static Application Security Testing (SAST) You can read and understand code (e.g. Java, Python, C++ or similar) You're familiar with using software composition analysis (SCA) tools such as Blackduck, Mend / Whitesource, Snyk or similar You're collaborative and pragmatic with great communications skills Apply now to find out more about this Application Security Test Engineer (DAST IAST) opportunity. At Client Server we believe in a diverse workplace that allows people to play to their strengths and continually learn. We're an equal opportunities employer whose people come from all walks of life and will never discriminate based on race, colour, religion, sex, gender identity or expression, sexual orientation, national origin, genetics, disability, age, or veteran status. The clients we work with share our values. TPBN1_UKTJ

The Shift Engineer forms part of the Technical team service provided under the contract. This Role falls part of the FM Operations based in BP Sunbury static based. Operating Hours will be a shift 0800 till 1830 spread over a shift pattern 4 days on 4 days off ,This will include call out. This role offers the opportunity to provide efficient and effective control of work services, supporting projects, operational activities, and small works across the BP portfolio. Primarily site-based, the position also includes the potential to provide local support to other BP site, central London location, based on skill set and operational requirements. Training and professional development will be a key part of the role and overall package, with a focus on further upskilling in areas such as Authorised Person (AP) responsibilities, isolations, and other key disciplines. Key objectives of the role: -The role will provide support in the coordination, planning and monitoring of sub-contract works including monitoring, auditing, and enforcement of the Control of Work requirements. -The role is responsible for the safe execution, agreed quality and timely completion of sub-contract work and to ensure that the Client & JLL requirements are adhered to at all times. -Support with out of contracted hours works and manage contractors and own work load -Accordingly in accordance and support from the Engineering Management Team. Ability to fault find LV / ELV control systems including monitoring and fault diagnostics on power quality. -Isolation of Plant and management of System including Controls and pump sets. -Will need to be IT literature as they will be required to work in real time on a tablet. -Manage data collection and systems to pull information and make changes. -To be able to install and maintain new plant and equipment when required, ensure that plant faults and defects are swiftly rectified. -Ensure that suitable spares are available to carry out both maintenance and reactive works and to establish estimated timescales to carry out remedial works -Will be expected to have acquired elements of other skills which enable them to work flexibly across trades -React to breakdown maintenance requests within the required SLA’s. -Ability to self-perform maintenance tasks. -Good understanding of an IT environment and Data systems -Previous Thermographic understanding preferred but not essential -Technical awareness of computer room/call centre/trader operations and experience of power, UPS, CPS, distribution, cooling etc. -Understanding of modular UPS systems including full understanding and experience of functional switching and scheduled switching. Capability of producing switching programmes. -Ability to maintain Dali lighting systems, including re-addressing and software changes (Software training to be provided) -Experience working with building management systems including fault finding and operator use. Experience with VAV systems, FCU systems, passive and active chilled water circuits and chilled beams. -Understanding of power generation, G59, auto changer systems. Or equivalent -Experience and understanding of HVAC systems. -Ability to test and diagnose power quality issues including harmonic distortion using onsite power analysers -Able to apply a risk focused maintenance approach and operations of plant and systems in data centres/critical environments -Provide emergency response OOH on site to manage the site BCP, Escalate urgent issues identified through to the Technical Services Manager. Respond to work interruptions, outages or emergencies consistent with the SLA. -Responsibility for ensuring all critical related engineering maintenance documentation & records are kept updated and conform Industry Standards -Ensure maintenance tasks are completed within agreed timescales. -Liaise with Clients representatives with respect to maintenance & repair tasks. -Advise the Facilities Management Team of changes in critical environment requirements -Must be willing to work over & above contractual hours. -Undertake site surveys & produce Works Requests, Method Statements & Risk Assessments for planned works. -Undertake Upgrade & Install small works. Control and supervise contractors when required. -To ensure all PPM’s and Critical Facility PPM’s are carried out to schedule and also ensure completion of all reactive Helpdesk Requests ensuring closing and completion in line with SLA’s -Ensure maintenance is carried out in line with JLL H&S procedures, using the permit to work system where applicable and action improvements identified during the building and workplace inspections and reviews -Monitor and analyse environmental conditions, review the loading and working conditions of critical equipment regularly -Fully understand the operational protocols associated with alarm conditions and auxiliary back-up system capabilities -Complete an incident report for all abnormal incidents affecting systems availability (draft prepared within 24 business hours of an incident). Determine the root cause and action items required to restore availability and prevent a recurrence. -Entering relevant quotes and remedial works onto the in-house team to be managed correctly -Maintain L8 compliance and onsite water treatment systems -Continually communicate building issues to end users. -Carryout fault finding on start-delta motors including VFD’s and Soft Start controls / contactors -Assist and enhance service delivery through best practice and the effective use of site systems and equipment. -Understanding of a CDM/ Permit to work process with experience of working on previous electrical install projects. Working alongside the EMEA Control of Works and SAP -Knowledge of domestic and commercial LTHW systems, pressure vessels buffer vessels and valve operation. -Maintain pumps sumps and tanks including float values sensors KNOWLEDGE, SKILLS & QUALIFICATIONS REQUIRED -Building Services Knowledge -Minimum of 5 yrs experience with a Recognised Apprenticeship and Qualifications to undertake the role in higher Education L2 Minimum -Mechanical/ Electrical / HVAC Knowledge -Commercial or LV switching Knowledge -Facility knowledge understand Hvac and systems. -HSE Knowledge -City & Guilds or equivalent in an Engineering, Electrician qualifications -SMSTMS / IOSH / NEBOSH certification desirable -Manager or supervisory experience of contractors for both remedial service and maintenance, -Competent operator of Permit to Work systems -Computer literate, familiar with MS Office Applications, including Microsoft Project and capable of becoming competent user of bespoke databases -Experience of having worked in a similar role within a large diverse organisation and have a proven track record of success in delivering and monitoring EHS activities -Ideally, experience of working in a continuous improvement culture. -BMS Controls Experience / HVAC Experience -Understanding not limited to PRVs , Pumps, -Critical Environment Cooling -Knowledge of emergency response/standby/call out activities and protocols -Understand the monitoring of utilities and environmental programmes

Job Purpose We are seeking an experienced and enthusiastic Contract Systems Engineer to support the growth of our Systems function and deliver Systems Integration activities within our Maritime sector. You will play a key role in integrating a complex sonar system upgrade involving specialist sensors, electronics, and signal‑processing firmware and software. Focusing primarily on the right-hand side of the Systems Engineering "V" lifecycle, you will support planning and execution of system integration and test activities, system and subsystem qualification, configuration tasks, and design data pack updates. You will also help secure customer acceptance by ensuring all capability requirements are met. The role includes generating and reviewing integration and test documentation, hands-on involvement with system and subsystem qualification activities, and participation in key technical reviews and user acceptance events. If you're looking to work within one of the most adaptable and reactive engineering environments in the UK defence sector, we would be keen to hear from you. Reporting to: Project Manager What You'll Do Lead and deliver system integration activities across all phases of testing and customer acceptance. Develop and review technical documentation including test specifications, procedures, and reports. Undertake testing, integration, qualification, and associated fault‑finding activities. Identify technical risks and opportunities across the project lifecycle. Collaborate closely with hardware, software, and firmware engineering teams to ensure performance requirements are met and issues are resolved efficiently. Participate in factory and external site acceptance events. Contribute to safety, reliability, and through‑life support considerations for delivered products. Work with external test houses to ensure compliance with MoD and European standards, including CE/UKCA marking. Adhere to all company health, safety and quality procedures. Support updates to design data packs (e.g., Bills of Materials, schematics, Change Notes) and assist with configuration control activities. Build and maintain strong working relationships with suppliers and customers. What You'll Need Experience in system test and integration, ideally within the defence domain. Understanding of the full systems lifecycle including design, development, testing, integration, and acceptance. Ability to analyse and verify system acceptance requirements, including evidence from qualification testing. Strong technical documentation skills, including producing test reports and verification evidence. Appreciation of electronics and software/firmware design principles to support complex fault‑finding. Excellent verbal and written communication skills for engagement with internal and external stakeholders. Ability to multi‑task and prioritise workloads with a hands‑on, proactive approach. Capability to collaborate effectively with stakeholders to develop practical, robust solutions. Degree in Engineering, Maths or a Science discipline (or equivalent experience). Current, valid SC security clearance (essential). Sole UK nationality preferred but not essential. Experience with MoD customers and defence equipment test standards (desirable). Office‑based role with occasional travel to customer and supplier sites

The Shift Engineer forms part of the Technical team service provided under the contract. This Role falls part of the FM Operations based in BP Sunbury static based. Operating Hours will be a shift 0800 till 1830 spread over a shift pattern 4 days on 4 days off ,This will include call out. - DAYS ONLY SHIFT This role offers the opportunity to provide efficient and effective control of work services, supporting projects, operational activities, and small works across the BP portfolio. Primarily site-based, the position also includes the potential to provide local support to other BP site, central London location, based on skill set and operational requirements. Training and professional development will be a key part of the role and overall package, with a focus on further upskilling in areas such as Authorised Person (AP) responsibilities, isolations, and other key disciplines. Key objectives of the role: The role will provide support in the coordination, planning and monitoring of sub-contract works including monitoring, auditing, and enforcement of the Control of Work requirements. The role is responsible for the safe execution, agreed quality and timely completion of sub-contract work and to ensure that the Client & JLL requirements are adhered to at all times. Support with out of contracted hours works and manage contractors and own work load Accordingly in accordance and support from the Engineering Management Team. Ability to fault find LV / ELV control systems including monitoring and fault diagnostics on power quality. Isolation of Plant and management of System including Controls and pump sets. Will need to be IT literature as they will be required to work in real time on a tablet. Manage data collection and systems to pull information and make changes. To be able to install and maintain new plant and equipment when required, ensure that plant faults and defects are swiftly rectified. Ensure that suitable spares are available to carry out both maintenance and reactive works and to establish estimated timescales to carry out remedial works The individual should have good understanding of HVAC systems and fundamentals, including the ability to be able to operate the equipment at its full potential. This includes basic controls knowledge with the ability to diagnose and repair any non-gas related issues. Manage time on Projects to suite deadlines and complete assigned tasks as stipulated by Technical Services / Project managers. Will be expected to have acquired elements of other skills which enable them to work flexibly across trades React to breakdown maintenance requests within the required SLAs. Ability to self-perform maintenance tasks. Good understanding of an IT environment and Data systems Previous Thermographic understanding preferred but not essential Technical awareness of computer room/call centre/trader operations and experience of power, UPS, CPS, distribution, cooling etc. Understanding of modular UPS systems including full understanding and experience of functional switching and scheduled switching. Capability of producing switching programmes. Ability to maintain Dali lighting systems, including re-addressing and software changes (Software training to be provided) Experience working with building management systems including fault finding and operator use. Experience with VAV systems, FCU systems, passive and active chilled water circuits and chilled beams. Understanding of power generation, G59, auto changer systems. Or equivalent Experience and understanding of HVAC systems. Ability to test and diagnose power quality issues including harmonic distortion using onsite power analysers Able to apply a risk focused maintenance approach and operations of plant and systems in data centres/critical environments Provide emergency response OOH on site to manage the site BCP, Escalate urgent issues identified through to the Technical Services Manager. Respond to work interruptions, outages or emergencies consistent with the SLA. Responsibility for ensuring all critical related engineering maintenance documentation & records are kept updated and conform Industry Standards Ensure maintenance tasks are completed within agreed timescales. Liaise with Clients representatives with respect to maintenance & repair tasks. Advise the Facilities Management Team of changes in critical environment requirements Must be willing to work over & above contractual hours. Undertake site surveys & produce Works Requests, Method Statements & Risk Assessments for planned works. Undertake Upgrade & Install small works. Control and supervise contractors when required. To ensure all PPMs and Critical Facility PPMs are carried out to schedule and also ensure completion of all reactive Helpdesk Requests ensuring closing and completion in line with SLAs Ensure maintenance is carried out in line with JLL H&S procedures, using the permit to work system where applicable and action improvements identified during the building and workplace inspections and reviews Monitor and analyse environmental conditions, review the loading and working conditions of critical equipment regularly Fully understand the operational protocols associated with alarm conditions and auxiliary back-up system capabilities Complete an incident report for all abnormal incidents affecting systems availability (draft prepared within 24 business hours of an incident). Determine the root cause and action items required to restore availability and prevent a recurrence. Review and submit to the Engineering Manager ensuring all actions are documented reviewed and completed Entering relevant quotes and remedial works onto the in-house team to be managed correctly Maintain L8 compliance and onsite water treatment systems Continually communicate building issues to end users. Carryout fault finding on start-delta motors including VFDs and Soft Start controls / contactors Assist and enhance service delivery through best practice and the effective use of site systems and equipment. Understanding of a CDM/ Permit to work process with experience of working on previous electrical install projects. Working alongside the EMEA Control of Works and SAP Knowledge of domestic and commercial LTHW systems, pressure vessels buffer vessels and valve operation. Maintain pumps sumps and tanks including float values sensors KNOWLEDGE, SKILLS & QUALIFICATIONS REQUIRED Building Services Knowledge Minimum of 5 yrs experience with a Recognised Apprenticeship and Qualifications to undertake the role in higher Education L2 Minimum Mechanical/ Electrical / HVAC Knowledge Commercial or LV switching Knowledge Facility knowledge understand Hvac and systems. HSE Knowledge City & Guilds or equivalent in an Engineering, Electrician qualifications SMSTMS / IOSH / NEBOSH certification desirable Manager or supervisory experience of contractors for both remedial service and maintenance, Competent operator of Permit to Work systems Computer literate, familiar with MS Office Applications, including Microsoft Project and capable of becoming competent user of bespoke databases Experience of having worked in a similar role within a large diverse organisation and have a proven track record of success in delivering and monitoring EHS activities Ideally, experience of working in a continuous improvement culture. BMS Controls Experience / HVAC Experience Understanding not limited to PRVs , Pumps, Critical Environment Cooling Knowledge of emergency response/standby/call out activities and protocols Understand the monitoring of utilities and environmental programmes TPBN1_UKTJ

The Shift Engineer forms part of the Technical team service provided under the contract. This Role falls part of the FM Operations based in BP Sunbury static based. Operating Hours will be a shift 0800 till 1830 spread over a shift pattern 4 days on 4 days off ,This will include call out. This role offers the opportunity to provide efficient and effective control of work services, supporting projects, operational activities, and small works across the BP portfolio. Primarily site-based, the position also includes the potential to provide local support to other BP site, central London location, based on skill set and operational requirements. Training and professional development will be a key part of the role and overall package, with a focus on further upskilling in areas such as Authorised Person (AP) responsibilities, isolations, and other key disciplines. Key objectives of the role: The role will provide support in the coordination, planning and monitoring of sub-contract works including monitoring, auditing, and enforcement of the Control of Work requirements. The role is responsible for the safe execution, agreed quality and timely completion of sub-contract work and to ensure that the Client & JLL requirements are adhered to at all times. Support with out of contracted hours works and manage contractors and own work load Accordingly in accordance and support from the Engineering Management Team. Ability to fault find LV / ELV control systems including monitoring and fault diagnostics on power quality. Isolation of Plant and management of System including Controls and pump sets. Will need to be IT literature as they will be required to work in real time on a tablet. Manage data collection and systems to pull information and make changes. To be able to install and maintain new plant and equipment when required, ensure that plant faults and defects are swiftly rectified. Ensure that suitable spares are available to carry out both maintenance and reactive works and to establish estimated timescales to carry out remedial works The individual should have good understanding of HVAC systems and fundamentals, including the ability to be able to operate the equipment at its full potential. This includes basic controls knowledge with the ability to diagnose and repair any non-gas related issues. Manage time on Projects to suite deadlines and complete assigned tasks as stipulated by Technical Services / Project managers. Will be expected to have acquired elements of other skills which enable them to work flexibly across trades React to breakdown maintenance requests within the required SLAs. Ability to self-perform maintenance tasks. Good understanding of an IT environment and Data systems Previous Thermographic understanding preferred but not essential Technical awareness of computer room/call centre/trader operations and experience of power, UPS, CPS, distribution, cooling etc. Understanding of modular UPS systems including full understanding and experience of functional switching and scheduled switching. Capability of producing switching programmes. Ability to maintain Dali lighting systems, including re-addressing and software changes (Software training to be provided) Experience working with building management systems including fault finding and operator use. Experience with VAV systems, FCU systems, passive and active chilled water circuits and chilled beams. Understanding of power generation, G59, auto changer systems. Or equivalent Experience and understanding of HVAC systems. Ability to test and diagnose power quality issues including harmonic distortion using onsite power analysers Able to apply a risk focused maintenance approach and operations of plant and systems in data centres/critical environments Provide emergency response OOH on site to manage the site BCP, Escalate urgent issues identified through to the Technical Services Manager. Respond to work interruptions, outages or emergencies consistent with the SLA. Responsibility for ensuring all critical related engineering maintenance documentation & records are kept updated and conform Industry Standards Ensure maintenance tasks are completed within agreed timescales. Liaise with Clients representatives with respect to maintenance & repair tasks. Advise the Facilities Management Team of changes in critical environment requirements Must be willing to work over & above contractual hours. Undertake site surveys & produce Works Requests, Method Statements & Risk Assessments for planned works. Undertake Upgrade & Install small works. Control and supervise contractors when required. To ensure all PPMs and Critical Facility PPMs are carried out to schedule and also ensure completion of all reactive Helpdesk Requests ensuring closing and completion in line with SLAs Ensure maintenance is carried out in line with JLL H&S procedures, using the permit to work system where applicable and action improvements identified during the building and workplace inspections and reviews Monitor and analyse environmental conditions, review the loading and working conditions of critical equipment regularly Fully understand the operational protocols associated with alarm conditions and auxiliary back-up system capabilities Complete an incident report for all abnormal incidents affecting systems availability (draft prepared within 24 business hours of an incident). Determine the root cause and action items required to restore availability and prevent a recurrence. Review and submit to the Engineering Manager ensuring all actions are documented reviewed and completed Entering relevant quotes and remedial works onto the in-house team to be managed correctly Maintain L8 compliance and onsite water treatment systems Continually communicate building issues to end users. Carryout fault finding on start-delta motors including VFDs and Soft Start controls / contactors Assist and enhance service delivery through best practice and the effective use of site systems and equipment. Understanding of a CDM/ Permit to work process with experience of working on previous electrical install projects. Working alongside the EMEA Control of Works and SAP Knowledge of domestic and commercial LTHW systems, pressure vessels buffer vessels and valve operation. Maintain pumps sumps and tanks including float values sensors KNOWLEDGE, SKILLS & QUALIFICATIONS REQUIRED Building Services Knowledge Minimum of 5 yrs experience with a Recognised Apprenticeship and Qualifications to undertake the role in higher Education L2 Minimum Mechanical/ Electrical / HVAC Knowledge Commercial or LV switching Knowledge Facility knowledge understand Hvac and systems. HSE Knowledge City & Guilds or equivalent in an Engineering, Electrician qualifications SMSTMS / IOSH / NEBOSH certification desirable Manager or supervisory experience of contractors for both remedial service and maintenance, Competent operator of Permit to Work systems Computer literate, familiar with MS Office Applications, including Microsoft Project and capable of becoming competent user of bespoke databases Experience of having worked in a similar role within a large diverse organisation and have a proven track record of success in delivering and monitoring EHS activities Ideally, experience of working in a continuous improvement culture. BMS Controls Experience / HVAC Experience Understanding not limited to PRVs , Pumps, Critical Environment Cooling Knowledge of emergency response/standby/call out activities and protocols Understand the monitoring of utilities and environmental programmes TPBN1_UKTJ

Entity: Production & Operations Job Family Group: Wells Group Job Description: Our purpose is to deliver energy to the world, today and tomorrow. For over 100 years, bp has focused on discovering, developing, and producing oil and gas in the nations where we operate. We are one of the few companies globally that can provide governments and customers with an integrated energy offering. Delivering our strategy sustainably is fundamental to achieving our ambition to be a net zero company by 2050 or sooner. About the role: We are now looking for the Senior Completion Engineer to join our Wells Global Concept Development and NOJV team! From one of our hub locations in either the US or Sunbury, you will be supporting bp's world-wide regional teams in successfully developing capitally efficient and inherently safe well concepts and full field development strategies across bps global portfolio. In this position, you will manage high degrees of uncertainty and support senior stakeholders in making business decisions. What you will deliver: Strong safety leadership that reflects bps values. Ensure all well construction activities align with bps Operating Management System, Engineering Practices, basis of design, and applicable regulatory requirements. Engineering and design workincluding contingencieson time and in alignment with bps Engineering Practices and OMS, including applying for deviations where appropriate. Ensure adherence to Equipment Integrity Assurance Guidelines and Supply Chain processes, including planning for long-lead items. Continuously apply industry standards and technology to improve well design, execution efficiency, and cost performance. Constructively challenge existing design assumptions and execution philosophies to unlock value and improve design robustness. Apply wells standards, workflows, and engineering tools consistently across daily tasks and project deliverables. Integrate well control requirements into all stages of well design and ensure well barrier documentation supports concept development. Review completion performance against critical metrics; drive lessons learned, best practice sharing, and continuous improvement. Lead and coordinate multi-functional workshops. Collaborate closely with internal completions and sand control SMEs. Act as a thought partner within the GCD and NOJV Manager, collaborating with other well engineers to provide integrated, end-to-end solutions to the businesses and customers we support. Work with multidisciplinary teams to create and test well concepts, assess feasibility, and develop optimization scenarios. Integrate with facilities and subsurface teams to drive ideation and generate development options. Provide defendable time and cost estimates for single-well and multi-well scenarios. Demonstrate a creative, concept-challenging approach in FEL activities. What you will need to be successful: Bachelors degree in science, Engineering, or an equivalent technical field. Significant experience as a Completions Engineer (domestic and/or international). Experience working in multi-disciplinary teams using agile delivery methods. Working knowledge of petrophysical inputs to completions design, including geomechanical models, tracers, and baseline evaluations across completion and stimulation types. Ability to define and develop flow assurance strategies for preventing wax, scale, and asphaltene deposition. Experience optimizing integrated tubing lift/reservoir models and conducting inflow performance analysis using appropriate software tools. Ability to estimate new-well value (incremental rate/resources, NPV), communicate risk and uncertainty, and support decision-making with clear mitigation strategies and surveillance requirements. Ability to identify sand control candidates and design, install, and operate sand management systems for sand-prone reservoirs. Experience using analogue field data to assess solids production risk, troubleshoot equipment/systems, and recommend compliant solids-handling solutions. Ability to evaluate scale prediction modeling and recommend appropriate prevention/removal methods specific to scale types. Strong capability in identifying and communicating subsurface uncertainties, assumptions, and alternative scenarios, and proposing significant risk-management strategies. Experience using tubing-distortion calculations and nodal analysis software for complex completion design and diagnosing well performance issues. Ability to describe subsea well intervention requirements, outline common workover activities, and classify rig and rigless intervention types (e.g., recompletions, water shutoff). Experience evaluating completion performance using PI, pressure-buildup, and PTA data; recommending well work and recognizing when specialist support is required. Why join us? At bp, we support our people to grow in a diverse and exciting environment. We believe that our team is strengthened by diversity. There are many aspects of our employees lives that are meaningful, so we offer benefits to enable your work to fit with your life. These benefits can include flexible working options, a generous paid parental leave policy, excellent retirement benefits, among others! We will ensure that individuals with disabilities are provided reasonable accommodation to participate in the job application or interview process, to perform essential job functions, and to receive other benefits and privileges of employment. Please contact us to request accommodation. Reinvent your career as you help our business meet the challenges of the future. Apply now! Travel Requirement Up to 25% travel should be expected with this role Relocation Assistance: This role is not eligible for relocation Remote Type: This position is a hybrid of office/remote working Skills: Artificial Lift, Artificial Lift, Coiled Tubing, Common process for wells activities, Completion equipment and accessories, Completions and Interventions Fluids, Completion tubing design, Control of Work, Cost Management, Drilling, Electric-line, Equipment integrity assurance, Fracturing and stimulation, Intelligent Completions, Management of change, monitoring and maintenance, OMS and bp requirements, Perforating, PPFG and geohazard principles for wells, Process Safety Management, Rig workovers, Risk Management, selection and construction, Slickline and braided-line, Solids and Sand Management {+ 17 more} Legal Disclaimer: We are an equal opportunity employer and value diversity at our company. We do not discriminate on the basis of race, religion, color, national origin, sex, gender, gender expression, sexual orientation, age, marital status, socioeconomic status, neurodiversity/neurocognitive functioning, veteran status or disability status.Individuals with an accessibility need may request an adjustment/accommodation related to bps recruiting process (e.g., accessing the job application, completing required assessments, participating in telephone screenings or interviews, etc.). If you would like to request an adjustment/accommodation related to the recruitment process,pleasecontact us. If you are selected for a position and depending upon your role, your employment may be contingent upon adherence to local policy. This may include pre-placement drug screening, medical review of physical fitness for the role, and background checks. TPBN1_UKTJ

ISTQB certification, device testing platforms (BrowserStack/LambdaTest), performance testing tools, cloud experience (AWS/Azure/GCP), and exposure to non-functional testing. Software Development Engineer in Test (SDET). You'll play a key role in building and evolving a scalable, fully automated test

They will be able to identify areas where test automation would be a good fit – considering repetitive regression testing, API functional tests (potentially with mocked data), and other areas where automation will provide good value for effort. We are looking for someone with good depth of experie

We’re looking for a motivated Embedded Software Test Engineer with excellent Python skills and a solid understanding of embedded systems to strengthen our Software Test organisation. Professional experience in embedded software, test automation, or a related area. A degree in Electronic & Electric

Design test plans, automate test cases, and present test strategies for team review. Paysafe is currently seeking a Senior Software Development Test Engineer to join its IT Development team to help us enhance our applications supporting Merchant Solutions division. Experience in functional, integrat

Paysafe is currently seeking a Senior Software Development Test Engineer to join its IT Development team to help us enhance our applications supporting Merchant Solutions division. Design test plans, automate test cases, and present test strategies for team review. Experience in functional, integrat

SDET (Software Development Engineer in Test). We are an engineering consultancy bridging Quality Engineering, Cloud Platforms and Developer Experience. This role involves working closely with engineering and data teams to ensure the reliability and performance of applications that integrate.

Software Test Engineer - Systems Integration & Validation. Develop comprehensive software test plans, designs, and specifications. ISTQB or similar software testing certification.

A leading technology consulting company is seeking a Software Engineer to develop and maintain testing solutions using C/C++ and C#. The role involves working with automation frameworks and applying DevOps practices to ensure high-quality software development.

As the QA Engineer, this is far more than a test execution role. Coaching and mentoring engineers through pairing, code reviews, and promoting meaningful test coverage. Expanding test coverage across existing systems while setting standards for the future.

As a Senior Software Engineer in Test at IOE, you are responsible for improving how IOE builds, maintains, and tests software while actively contributing to product development. Test execution: design and execute comprehensive test plans, including unit, integration, and end‑to‑end tests, as wel

Software Development Engineer in Test / 6 months / Wiltshire (Hybrid) / 400 - 450pd (Inside IR35). Experienced working with testing tools such as. If interested and feel yourself well sutied, please apply via this advert with your latest CV and I will be in touch to discuss.

A leading digital services company in the United Kingdom is looking for a skilled Software Engineer to develop and maintain test solutions using C/C++, C#, and scripting languages. The successful candidate will work with test automation frameworks and contribute to high-quality software development,

You will play a vital role working within a cross functional team, participating in the development of software with a primary focus being on the testability and performance of software applications. Automation Testing is at the core of defining, developing and testing products for businesses and th

A leading IT recruitment agency is seeking a Software Test Engineer to join a fast-growing SaaS business. You will be responsible for manual testing and collaborating closely with developers. This remote position requires expertise in testing.

A technology solutions provider in the United Kingdom is seeking a Test Engineer to perform software and system testing on security products. This role involves installing software, conducting validation tests, and reporting findings. Candidates should have a degree in an engineering discipline and

A leading tech company seeks an Embedded Software Test Engineer to enhance their Software Test organization. The ideal candidate holds a degree in Electronic & Electrical Engineering or a related field and possesses solid experience in embedded software and test automation. This role involves develo

Experience in API testing will be an added advantage.

Support creation of test artefacts such as test plans, test cases, and test reports. Our client, a Defence & Security supplier is looking for a Software Test Engineer to join them on a contract basis at their site in Tewkesbury. Python, Pytest, C++, Software Test, Defence, RF.

As a Software Test Engineer, you'll own end-to-end testing lifecycles for real-time software simulating complex weapon systems and sub-systems. Planning comprehensive test strategies, defining software test beds, and developing test plans/specs aligned to customer requirements. A leading UK defence

Familiarity with test frameworks such as pytest, GTest, or similar. Senior Software Development Engineer in Test. Senior Software Development Engineer in Test.

Senior Software Engineer in Test, Data / ETL (Remote - EMEA). Senior Software Engineer in Test, Data / ETL. As a Senior Software Engineer in Test specializing in Data and ETL, you will play a central role in ensuring data quality, performance, and reliability across large-scale, cloud-native systems

As a Test Automation Engineer, you’ll play a crucial role in ensuring our software is robust, scalable, and built with quality at its core. Deep understanding of test-driven development and full-stack test automation. Proficiency with test tools such as MS Test, or XUnit.

With a strong focus on reliability, performance, and security, they’re continuing to expand their UK engineering capability and are now hiring multiple Software Test Engineers at various experience levels to strengthen their growing Test and QA function. As a Software Test Engineer, you’ll be re

You will join a diverse team of 5 multi-skilled engineers in the UK. Playwright (end-to-end testing). Designing and implementing tests, whether it is manual or automated.

We are looking for someone with good depth of experience who can help contribute towards our test automation framework that fits between unit test coverage and the manual testing that we currently have in place. Knowledge of software testing methodologies, levels and types. Stay up‑to‑date with

You’ll be joining one of our Agile Product squads which consist of a Software Engineering Manager, Software Engineers and fellow SDETs, reporting into a Tribe QA Engineering Manager. Has strong experience of API testing and/or contract testing. Has strong experience integrating testing at various

As part of this programme, they are looking to engage an experienced Senior Software Tester to support both automated and manual testing across complex, business‑critical applications. Senior Software Tester – Contract. Proven experience testing complex software systems in delivery environments.

A leading recruitment agency in the United Kingdom seeks a Graduate Software Engineer in Test to join a dynamic financial trading team. This hybrid position combines software development with automation testing, providing a fast-paced and impactful work environment. Ideal candidates will have a Comp

Familiarity with test frameworks such as pytest, GTest, or similar. This senior role focuses on strengthening the quality engineering foundation for our SDK by developing robust automation, scalable CI/CD systems, and effective test strategies. Applying modern test frameworks and quality metrics to

Deep knowledge of automated UI testing. Experience designing test architecture and strategy,. Hands-on experience with contract testing (e.

Senior Software Development Test Engineer. Design test plans, automate test cases, and present test strategies for team review. Paysafe is currently seeking a Senior Software Development Test Engineer to join its IT Development team to help us enhance our applications supporting Merchant Solutions d

A technology apprenticeship program in the United Kingdom is offering Software and Test Engineer Apprenticeships.

You will be positioned as a senior engineer with a specialisation in test automation and quality engineering, rather than someone who only executes test cases. We’re looking for a Senior Software Development Engineer in Test (SDET) who will act as a development partner rather than a traditional QA

You’ll be joining one of our Agile Product squads which consist of a Software Engineering Manager, Software Engineers and fellow SDETs, reporting into a Tribe QA Engineering Manager. Has strong experience of API testing and/or contract testing. A sound understanding of agile methods of software de