Trabajos software test engineer en BristolCrear alertas

Weapons Systems Engineer Job Description The Weapons Systems Engineer supports the design, integration, testing and through-life support of complex weapons or combat systems. Depending on the project, the role may cover electronic systems, sensors, communications interfaces, system performance or engineering verification. Key responsibilities Review system requirements and technical specifications. Support the integration of equipment and subsystems. Investigate technical faults and performance issues. Develop or review test procedures and engineering reports. Participate in trials, verification and validation activities. Maintain technical records and contribute to engineering assurance. Coordinate with software, electrical, mechanical and systems engineering teams. Experience and skills sought Weapons engineering, electronic engineering or systems engineering experience. Understanding of complex equipment and subsystem integration. Experience in testing, maintenance, troubleshooting or technical assurance. Ability to interpret technical requirements and produce clear documentation. Security clearance is needed

Systems Integration and Development Engineer 12 months £67.47 per hour Full time on site - Bristol We require a Systems Integration and Development Engineer to support an iterative research and development service that will define, build, integrate, test, assure and release tactical edge gateway solutions for range extension and sensor integration across Line-of-Sight and Beyond-Line-of-Sight scenarios. You will support the integration of Commercial Off-The-Shelf (COTS) equipment, software and network services within a Tactical Mission Environment. Your primary place of work will be at Filton, Bristol, with further attendance required at various customer sites to engage with end-users, support demonstrations, trials, test events and assurance activities. There could also be an opportunity for overseas travel as the project evolves. Typical duties include (but are not limited to): Operate at SFIA Level 5, demonstrating substantial autonomy, authoritative technical judgement, influence across stakeholders and responsibility for the planning and delivery of complex engineering and integration activities. Act as the principal day-to-day engineering focal point, coordinating design, development, integration, testing and technical documentation activity across various stakeholders. Translate prioritised user stories, use cases and acceptance criteria into proportionate technical tasks, solution options, development plans and demonstrable outputs for each iterative solution. Develop, integrate and configure tactical edge gateway solutions using COTS hardware, network components, software, virtualisation and containerisation technologies, as applicable to the agreed problem set. Support the integration of tactical radios, routers, sensors, Bearers of Opportunity, ensuring solutions are configurable, scalable, interoperable and suitable for further iteration. Produce and maintain solution architectures, interface definitions, configuration/build information, bill of materials, work instructions, user documentation and repeatable implementation patterns sufficient to reproduce an accepted solution. Plan, prepare and conduct integration, functional, performance and interoperability testing, including the capture and analysis of test evidence against agreed acceptance criteria. Identify, investigate and manage technical faults, integration constraints, risks, assumptions, dependencies and requests for change, coordinating troubleshooting and corrective action with appropriate specialists. Support Secure by Design, safety, quality, configuration management, technical assurance and release activities, providing evidence required by the Authority and escalating matters that require specialist or delegated approval. Support demonstrations, user trials and requirements solicitation activities, capturing user feedback and converting agreed outcomes into backlog items and future development recommendations. Provide technical input to Change Acceptance Boards, Capability Integration Working Groups, Service Maturity Assessment evidence and other project governance and assurance activities. Plan and coordinate additional resource requirements where the task requires expertise or capacity beyond your core abilities, to include; network architecture, software engineering, cyber security, electronics, test and evaluation, safety, human factors and technical authoring. Work to short iterative delivery cycles, with the aim of supporting rapid development and evidence-based acceptance of Minimum Viable Product solutions. Knowledge: Mandatory: Proven experience delivering systems integration and development within complex communications, tactical network, defence or similarly regulated environments. Strong systems engineering capability, including requirements interpretation, user story analysis, architecture development, interface management, verification, validation, acceptance and release evidence. Practical experience integrating COTS hardware, software, network components, compute, gateway equipment and associated services into coherent, supportable and repeatable solutions. Ability to develop, integrate, configure and test tactical edge gateway solutions that support range extension, sensor integration, LOS/BLOS operation, WAN access and Bearers of Opportunity. Knowledge of IP networking, routing, WAN technologies, secure network design and interoperability between radios, routers, sensors, gateways and wider tactical mission network services.Desirable: Knowledge of MOD engineering governance, GEAR, Secure by Design, Defence Lines of Development, safety and environmental management, quality management and assurance processes. Knowledge of tactical communications, tactical edge gateways, tactical radio networks, range extension, sensor integration, satellite bearers, MANET, MTN, TMN and Bearers of Opportunity. Electronics knowledge relevant to gateway development, including power integration, equipment layout, cabling, enclosure constraints and integration of gateway components. Skills: Mandatory: Experience planning, preparing and conducting integration, functional, performance, resilience and interoperability testing within controlled development and test environments, including production of objective test evidence. Ability to produce repeatable technical patterns, build standards, configuration records, bills of materials, work instructions, user guidance, release evidence and technical documentation sufficient to reproduce accepted solutions. Experience supporting iterative development, including translating prioritised requirements into technical tasks, backlog items, acceptance criteria, definitions of done and demonstrable solution increments. Ability to identify, investigate and manage technical faults, integration constraints, delivery risks, assumptions, dependencies, obsolescence considerations and requests for change. Experience supporting engineering governance, technical assurance, Secure by Design, configuration management, safety, quality and release activities within MOD or comparable controlled delivery environments. Strong stakeholder management and communication skills, including the ability to work with users, SPTC engineering resource, Product Owner/Capability Integrator resource, DIP teams, commercial staff, assurance stakeholders and governance forums. Ability to coordinate specialist support where required, including network architecture, software engineering, cyber security, electronics, test and evaluation, safety, human factors, CAD/mechanical design and technical authoring. Experience providing evidence to support acceptance activity, including progress reporting against agreed outputs, risks, issues and dependencies.Desirable: Hands-on software development, scripting, software integration, DevOps or configuration management experience. Experience of virtualisation, containerisation and deployment of software services within gateway, compute, cloud-enabled or tactical network environments. Experience supporting CAD, STL file production, 3D printing, enclosure development, mechanical layout, cable management, maintainability, environmental resilience and deployability considerations. Experience supporting vulnerability assessment, security architecture, penetration testing or cyber assurance activities, including coordination of independent cyber specialists where required. Experience working in Agile or hybrid iterative delivery environments, including rapid prototyping, fail-fast development, lessons learned, user feedback capture and delivery of Minimum Viable Product increments. Experience producing technical options, trade studies and recommendations covering integration, interoperability, affordability, supportability, scalability, value for money and technical risk. Experience supporting development of deployable or MilSpec solutions, including user instructions, operating instructions, codification, support documentation or transition-to-service planning. Awareness of MOD commercial delivery routes and working practices, including DIP, POCI, framework-based equipment procurement and tasking through existing contractual arrangements

Systems & Controls Engineer Location: Bristol — onsite Contract: 12 months Rate: £35–£39 per hour, all inclusive IR35: Outside IR35 SC Engineering Group is recruiting a Systems & Controls Engineer to support the design, integration and development of industrial automation and test systems. This role would suit an engineer with experience across systems engineering, PLC programming, control systems and electrical integration within industrial, automation, aerospace or test environments. Key Responsibilities Design, develop and integrate control systems for industrial automation and test applications. Develop and modify PLC software, preferably using Bosch Rexroth platforms. Use MATLAB/Simulink for system modelling, simulation and performance analysis. Carry out control system development, PID tuning and optimisation. Design and integrate data acquisition systems, sensors and actuators. Design and review electrical and electronic systems, schematics and bills of materials. Support machinery compliance, UKCA/CE marking and EMC requirements. Produce technical reports, design documentation and test records. Work across mechanical, electrical, controls and DAQ disciplines to support system integration. Required Skills & Experience Systems engineering experience within industrial, automation, aerospace or test environments. Experience with industrial automation systems and machinery directive compliance. PLC programming experience, ideally with Bosch Rexroth platforms. Working knowledge of MATLAB/Simulink modelling and simulation. Strong understanding of control systems engineering and PID tuning. Experience designing and integrating data acquisition systems. Ability to interpret and review electrical schematics and BOMs. Experience selecting sensors, actuators and automation components. Understanding of UKCA/CE marking and EMC compliance. Ability to produce clear technical documentation and reports. Desirable Experience HMI development. Test system and test rig development. Industrial automation commissioning. Integration of mechanical, control and DAQ subsystems. Aerospace environmental testing systems. * Advanced control tuning and optimisation techniques. To apply, send your CV to SC Engineering Group or contact us to discuss the contract

AMS is a global workforce solutions partner committed to creating inclusive, dynamic, and future-ready workplaces. We help organisations adapt, grow, and thrive in an ever-evolving world by building, shaping, and optimising diverse talent strategies. Our Contingent Workforce Solution (CWS) is one way we support our clients. Acting as an extension of their recruitment teams, we connect them with skilled interim and temporary professionals, fostering workplaces where everyone can contribute and succeed. On behalf of our globally respected client who develop cutting-edge technologies that deliver clean, safe and competitive solutions to meet the planet's vital power needs we are looking for a MBSE Control Systems Engineer for a 12 months contract based in Bristol. Please note that this role is going to be hybrid. Purpose of the role: We have an exciting opportunity for a Control Systems Engineer to work in our Mission Critical Systems & Software team. This team sits within our consolidated Engineering, Technology & Safety function, supporting the Defence business in Bristol to deliver solutions across a range of Naval Marine customers; this position is available on a 12 month Umbrella contract with hybrid working conditions. The Control Systems Engineer requires knowledge and understanding of Model-Based Software Development methods using the MathWorks tool suite to update and develop application specific software models and functions. The Control Systems Engineer will also take part in the design, verification, and in-service support of Control Systems solutions for Marine Gas Turbines and will work on systems, hardware, and software, according to their skillset and the business needs. As a MBSE Control Systems Engineer you will be: Working in accordance with relevant engineering processes and standards, the engineer may perform or coordinate tasks at all stages of the lifecycle of the product, such as: System architecture design, analysis, and allocation of functional and safety requirements. Interpret customer and derived requirements, definitions and validate for the system or product. Software design, coding, review, test (across a range of platforms including Real-Time Embedded Controllers and Human-Machine Interface panels). Conducting systems verification, compliance, and regulatory qualification.The skills you'll need: Have experience as a Control Systems Engineer in an aerospace, defence or safety critical role Be able to work as a member of the team to deliver Product Development or Application Engineering solutions to meet business project needs and deadlines. Have experience in Model-Based Software Development using the MathWorks tool suite (MATLAB, Simulink, etc.) SW verification / scripting and automation. Possess excellent written and verbal communication/influencing skills, being able to clearly and effectively articulate ideas, plans and priorities to engineers of other disciplines.It would be advantageous if you: Have experience of communication fieldbus and networking technologies, especially, CANbus / CAN-Open and Modbus TCP/IP as used in distributed control systems Have experience with the design and code of graphical Human-Machine Interface systems and/or SCADA systems Have experience of developing high integrity systems in line with appropriate standard (including Aerospace and industry equivalents such as IEC61508, ARP4754 or DO178) Have experience of hand-coding for embedded systems, in C, C++ or similarNext steps We will only accept workers operating via an Umbrella or PAYE engagement model. If you are interested in applying for the MBSE Control Systems Engineer position and meet the criteria outlined above, please click the link to apply and we will contact you with an update in due course. AMS, a Recruitment Process Outsourcing Company, may in the delivery of some of its services be deemed to operate as an Employment Agency or an Employment Business

Location: Bristol (fully onsite) Duration: 12 month contract Rate: £70ph UMB (Inside IR35) Role details: We are looking for an experienced ADA Software Engineer to join our defence client on a contract basis - you will work as part of a dynamic team, to develop and deliver innovative solutions by exploiting a wide portfolio of software technologies. Responsibilities: To undertake a full range of engineering activities in line with relevant processes, quality and other requirements. The role will involve Ada code development and verification. The role will involve software V&V, primarily using target-based equipment containing the software under test and complex simulations of other Missile subsystems. You will work as part of a small team and be empowered to work individually with little supervision. Skillset/experience required: Experience of both UML (Rhapsody) and Ada (AdaCore). Knowledge of DOORs and IBM Config Management tooling (EWM) would be useful. Suitable skills and experience in Integration testing and debugging. Experience of working in High Dependability systems would be beneficial. Interested? Apply today via the link provided

UAV Software Engineer Bristol / West Wales | Hybrid | Permanent Minimum 3 days per week on site Want to build software that actually flies? We’re recruiting a UAV Software Engineer for a rapidly growing organisation developing advanced Uncrewed Aerial Systems (UAS) for demanding defence applications. You’ll develop software running onboard UAV platforms, working across autopilots, autonomy, payloads and other mission-critical subsystems. You’ll work on existing aircraft while also helping shape next-generation platforms and clean-sheet designs, taking software from concept and simulation through to real-world flight testing. What you’ll be doing Designing, developing, integrating and debugging onboard UAV software Developing embedded software using C++ and/or Rust Working across autopilot, autonomy, payload and platform systems Building robust test and simulation environments, including SIL/HIL Helping shape software architecture and future platform development Supporting aircraft integration and flight-test activity You’ll ideally have: Strong C++ and/or Rust experience in embedded or real-time environments Experience within UAV/UAS, robotics, autonomous systems or aerospace Strong Linux and modern software development skills A technical degree or equivalent practical experience Experience with any of the following would be particularly useful: PX4 | ArduPilot | MAVLink | ROS 2 | FreeRTOS | Docker | Yocto | Autonomy | Machine Vision | Guidance & Control | Sensor Fusion | CMake | GitLab CI | DO-178C Why consider it? This is a chance to work on the complete UAV platform, not just an isolated software component. You’ll see your software move from development and simulation onto real aircraft, while helping influence the architecture of future UAS platforms. The position is based in Bristol, with hybrid working and a minimum of three days per week on site. Due to the nature of the programmes, you'll need to be eligible and willing to undergo UK Security Clearance vetting (SC Level). Interested? Apply directly for a confidential conversation about the role, technology and team

Software Engineer Ada, Integration & Test Engineer required for long term contract assignment based in Bristol Skillset/experience required: Experience of both UML (Rhapsody) and Ada (AdaCore). Knowledge of DOORs and IBM Config Management tooling (EWM) would be useful. Suitable skills and experience in Integration testing and debugging. Experience of working in High Dependability systems would be beneficial.Responsibilities: To undertake a full range of engineering activities in line with relevant processes, quality and other requirements. The role will involve Ada code development and verification. The role will involve software V&V, primarily using target-based equipment containing the software under test and complex simulations of other Missile subsystems. Modis International Ltd acts as an employment agency for permanent recruitment and an employment business for the supply of temporary workers in the UK. Modis Europe Ltd provide a variety of international solutions that connect clients to the best talent in the world. For all positions based in Switzerland, Modis Europe Ltd works with its licensed Swiss partner Accurity GmbH to ensure that candidate applications are handled in accordance with Swiss law. Both Modis International Ltd and Modis Europe Ltd are Equal Opportunities Employers. By applying for this role your details will be submitted to Modis International Ltd and/ or Modis Europe Ltd. Our Candidate Privacy Information Statement which explains how we will use your information is available on the Modis website

Embedded Software Engineer – Aerospace Bristol | Circa £50,000 I’m recruiting two Embedded Software Engineers on behalf of a specialist technology company developing high-integrity software for safety-critical applications. The team is looking to appoint one engineer with a stronger software development background and another focused on software verification. These positions would suit engineers with around five years’ experience in aerospace or another tightly regulated sector, such as automotive, medical devices or defence. The role Depending on your background, you will contribute to either the development or verification of embedded software, including: Developing and testing embedded software in C Producing software requirements, design documents and test documentation Verifying software against recognised aerospace and safety standards Supporting RTOS software across different processor architectures Debugging software and hardware integration issues Participating in code reviews, configuration management and controlled development processes Supporting product validation, certification and deployment Requirements Commercial embedded software experience, ideally within aerospace Strong embedded C programming skills Experience working within a controlled or safety-critical development environment Knowledge of the embedded software development lifecycle Experience producing detailed technical and certification documentation Familiarity with standards such as DO-178B/C, IEC 61508, ISO 26262 or IEC 62304 A degree in Engineering, Computer Science, Mathematics or a related subject Experience with FreeRTOS, SAFERTOS, ARM Cortex processors, assembly language, TCP/UDP networking or embedded security would be advantageous. These are documentation-intensive aerospace positions, so they will particularly suit methodical engineers who enjoy traceability, verification and structured engineering processes alongside technical software work. Applicants should ideally already hold the right to work in the UK

Electronics Engineer – Bristol Area – £50,000 Location: Bristol Area Salary: Up to £50,000 Job Type: Permanent I’m currently recruiting for an Electronics Engineer to join a rapidly growing technology and R&D organisation in the Bristol area. This is an excellent opportunity to work on cutting-edge electronics, RF, FPGA and embedded systems, developing innovative solutions for complex technical challenges. You’ll join a highly technical engineering team working across the full development lifecycle, from early-stage research and concept development through to hardware design, prototyping, testing and trials. The Role As an Electronics Engineer, you’ll work on a variety of fast-paced R&D programmes, with a particular focus on radio frequency and communications technologies. Responsibilities will include: Analogue and digital hardware design RF and software-defined radio development FPGA and System-on-Chip (SoC) technologies Embedded systems and microcontrollers Sensors and signal processing technologies Hardware prototyping, integration and testing Producing technical requirements and design documentation The Ideal Electronics Engineer You’ll ideally have 3+ years’ commercial electronics or hardware engineering experience and a strong background in some of the following: RF / Radio Frequency electronics Analogue and digital electronics Communications systems Sensors and signal processing Hardware design, build, test and debugging * Prototype or pre-production development This position would suit an engineer who enjoys technically challenging R&D work and wants exposure to innovative technologies across RF, electronics, FPGA and embedded systems. If you’re a Hardware Engineer, Electronics Engineer, RF Engineer or FPGA Engineer looking for a new opportunity in the Bristol area, please apply to discuss the role in more detail. Due to SC you must have the full right to work in the UK for this role

Job Role: Weapons Engineer Location: Bristol - Hybrid (2-3 days on-site) Salary: £50,000 - £55,000 Proactive are currently in search of multiple experienced Weapons Engineers to start work for a client in Bristol. This is a permanent position offering ample opportunities for progression and development. The ideal candidate will have come from a defence or service background looking to take the next step in their career. The Weapons Systems Engineer supports the design, integration, testing and through-life support of complex weapons or combat systems. Depending on the project, the role may cover electronic systems, sensors, communications interfaces, system performance or engineering verification. Key responsibilities Review system requirements and technical specifications. Support the integration of equipment and subsystems. Investigate technical faults and performance issues. Develop or review test procedures and engineering reports. Participate in trials, verification and validation activities. Maintain technical records and contribute to engineering assurance. Coordinate with software, electrical, mechanical and systems engineering teams.Experience and skills sought Understanding of complex equipment and subsystem integration. Weapons engineering, electronic engineering or systems engineering experience. Experience in testing, maintenance, troubleshooting or technical assurance. Ability to interpret technical requirements and produce clear documentation. Security clearance where required by the project.For more information on the role, or an informal discussion regarding opportunities we have available, please contact Jemal Tawfieg on (phone number removed) or m Why work with Proactive? Proactive Technical Recruitment is an industry leading, specialist engineering recruitment agency focused on the automation, manufacturing and robotics sectors. We offer specialist recruitment services to a niche customer base, vetting that our clients offer the best opportunities for your career. Proactive encourages and promotes equality and diversity within the workforce. We act with honesty, integrity and impartiality, ensuring your application is considered on its own merits and without bias. When registering with Proactive you will have the opportunity to apply for some of the most interesting, specialist, opportunities in the marketplace, with the biggest companies in the sector. Follow us on Linkedin and Facebook for industry news and download our app for live notifications about newly listed vacancies. We look forward to helping you find your next role! Proactive Global is committed to equality in the workplace and is an equal opportunity employer. Proactive Global is acting as an Employment Business in relation to this vacancy

Systems Proving Engineer Salary: Up to £46,500 depending on experience Location: Bristol Working pattern: 4 to 5 days onsite Clearance: British Citizen or Dual UK national with British citizenship Are you a Systems Engineer with experience of integration, testing, trials or design verification? We are supporting an established high-technology defence engineering organisation with the recruitment of several Systems Proving Engineers to join an expanding Integration and Systems Validation team. This is an opportunity to work across the full proving and validation lifecycle, supporting the development, integration and acceptance of complex systems within a highly regulated engineering environment. The opportunity As a Systems Proving Engineer, you will work closely with systems engineering and design teams to plan, prepare and execute trials, ensuring that systems are adequately verified and that meaningful data is captured throughout the process. Your responsibilities will include: Planning, generating and executing system trials in collaboration with systems engineering and design teams Working with engineering teams to ensure appropriate trials data is acquired Investigating and helping to resolve design and integration issues identified during testing Producing trials documentation and supporting associated reviews Preparing for and participating in Trials Readiness Reviews Conducting post-trial data analysis and producing technical reports Supporting laboratory-based functional integration and system trials Supporting ground-based, harbour and sea trials Supporting live system trials and other formal proving activities Supporting trials conducted both within the UK and overseas Assisting with laboratory management activities including risk assessments, asset management, audits and laboratory safety Supporting hardware and software configuration controlThe role offers opportunities for travel within the UK and internationally, depending on project requirements. What we’re looking for We are interested in engineers with experience in one or more of the following areas: Systems integration Systems proving, testing or trials Naval systems integration Complex equipment or system test Interface design Systems assessment and acceptance Design verification and validation Electrical or mechanical construction and interfacing Electronic design and test Network integrationYou should also be comfortable communicating with a broad range of stakeholders including engineers, suppliers, partners, subcontractors and management. Experience with systems engineering or MBSE tools such as DOORS, Rhapsody or RTC would be beneficial. Experience of coding, particularly Python, would also be advantageous. This role would suit an engineer who enjoys practical systems engineering and wants to see their work progress beyond design and into real-world integration, testing and proving. Package and benefits Salary up to £46,500 depending on experience Company bonus of up to £2,500, dependent on company performance Pension contributions of up to 14% combined Paid overtime opportunities Up to 15 additional days through flexi leave Flexible working arrangements Enhanced parental leave Subsidised onsite facilities Free onsite parkingSecurity requirements Restrictions and/or limitations relating to nationality and/or rights to work may apply. As a minimum and after offer stage, all successful candidates will need to undergo HMG Basic Personnel Security Standard checks (BPSS). To qualify for this level of clearance, applicants must be British Citizens or Dual UK Nationals with British citizenship. Electus Recruitment Solutions provides specialist engineering and technical recruitment solutions to a number of high technology industries. We thank you for your interest in this vacancy. If you don't hear from us within 7 working days please presume your application has been unsuccessful on this occasion. You are of course free to resubmit your CV/details in the future and we shall assess your suitability at that time

43000 - 50000 per annumBristol, EnglandPermanentAn exciting opportunity has arisen to join the growing Integration and Systems Validation team supporting the Land Ceptor project with Ground Based Trials activities for a large export programme.The opportunity: A varied role that consists of a mix of functional testing, equipment qualification and acceptance, plus problem identification and resolution. An opportunity to gets hands on experience with real equipment, and support testing and demonstrations of capability to MBDA's customer across sites in the UK, Poland and the USA. As well as working with other external stakeholders to deliver the wider weapon system to the customer.We are looking for a broad-based Systems Integration and Proving Trials Engineer who will be able to:Work with stakeholders across the project, from within partner companies and from the customer community, to plan trials to demonstrate integration and gather evidence to qualify MBDA Weapon Systems into a wider System of Systems environmentLiaise with the systems engineering team and design teams to ensure adequate trials data is acquired and to investigate and resolve design issues.Analyse and report on in-depth analysis of the system behaviour across its internal and external interfaces.Deliver trials in a number of environments, including:Lab-based integration and functional rigs;System of Systems integration trials;Acceptance trials;Firing trials;Conduct and support failure investigations.Support safe and reliable trials, including developing and maintaining risk assessments, management of hardware and software assets and control of hardware and software configuration.This is a UK-based role, with opportunities to travel abroad. This role provides a great opportunity to work in a fast-paced, customer-facing environment with guaranteed diverse work.This is a great opportunity to become a member of an expanding team delivering key aspects of the latest generation of GBAD system programmes and interfacing with the end Customer and User teams.What we're looking for from you:We are looking for an engineer with the following skills:Good verbal and written communication skills;Experience communicating at an appropriate level with a wide and varied range of both engineering and management stakeholders;Experience working within a large team, across multiple sites and with multiple departments;Experience with V&V lifecycle, requirement and configuration management and defect reporting.Experience in these areas would also be beneficial, though formal and on-the-job training will be available:Wireshark network monitoring tool usage;Network systems and protocols, experience of switch and router configuration and management;DOORS & Engineering Test Management (ETM) requirements tools;Basic understanding of network / cable assembly drawings;Fault finding and route cause analysis at subsystem integration level;Experience in customer facing roles.Salary: up to 50,000pa (depending on experience)Dynamic (hybrid) working: typically, 3-5 days per week on-site, due to workload classification (depending on testing)Security Clearance: British Citizen OnlyRestrictions and/or limitations relating to nationality and/or rights to work may apply. As a minimum and after offer stage, all successful candidates will need to undergo HMG Basic Personnel Security Standard checks (BPSS), which are managed by the MBDA Personnel Security Team.What we can offer you:Company bonus: Up to 2,500 (based on company performance and will vary year to year)Pension: maximum total (employer and employee) contribution of up to 14%Overtime: opportunity for paid overtimeFlexi Leave: Up to 15 additional daysFlexible working: We welcome applicants who are looking for flexible working arrangementsEnhanced parental leave: offers up to 26 weeks for maternity, adoption and shared parental leave -enhancements are available for paternity leave, neonatal leave and fertility testing and treatmentsFacilities: Fantastic site facilities including subsidised meals, free car parking and much more…

Commissioning Engineer - Integrated Security Systems (HVDC Converter Stations) Location Multiple UK Sites (HVDC Converter Stations & National Grid Infrastructure Projects) Rate Competitive Day Rate (DOE) Duration Contract Overview Our client is seeking an experienced Commissioning Engineer to support the testing, commissioning, and handover of Integrated Security Systems (ISS) across critical National Grid infrastructure projects, including HVDC converter stations. This role will focus heavily on commissioning complex electronic security systems within live operational environments, working alongside principal contractors, technology providers, and National Grid stakeholders to ensure successful project delivery. Key Responsibilities • Commission and test Integrated Security Systems within critical infrastructure environments., • Complete Factory Acceptance Testing (FAT), Site Acceptance Testing (SAT), and system handovers., • Configure, test, fault-find, and validate security platforms., • Support commissioning activities across CCTV, access control, intercom, perimeter detection, and associated network infrastructure., • Identify and resolve integration, software, and hardware issues., • Produce commissioning documentation, test records, and handover packs., • Work collaboratively with project managers, installation teams, and client representatives., • Ensure compliance with National Grid procedures, safety standards, and project specifications., • Support warranty investigations and defect resolution where required. Essential Experience, • Proven experience commissioning Integrated Security Systems within critical infrastructure environments., • Previous work on National Grid, utility, energy, transmission, HVDC, substation, gas compressor, or similarly regulated sites., • Strong commissioning and testing background within electronic security systems., • Experience conducting Site Acceptance Testing (SAT)., • Ability to diagnose and rectify system faults during commissioning and post-handover phases., • Experience working in live operational environments with strict permit and safety procedures. Technical Experience Required Candidates should demonstrate experience with some or all of the following systems: • Genetec Security Center, • Gallagher Access Control, • CCTV Platforms, • IP CCTV Systems, • Axis Cameras, • Commend Intercoms, • Access Control Systems, • ANPR Systems, • Fibre Networks, • Structured Cabling, • Electronic Security Integration, • Network Configuration & Diagnostics, • Security System Software Configuration Preferred Experience, • Previous involvement with National Grid ISS programmes., • Experience on HV substations or HVDC converter station projects., • Background working with principal contractors and security integrators., • Knowledge of cyber-secure security environments., • Experience resolving commissioning defects and supporting warranty periods. Qualifications & Certifications, • Valid National Grid Person / Competent Person authorisation (desirable)., • SCO91 (desirable)., • SMSTS or SSSTS., • ECS / CSCS., • Relevant manufacturer training (Genetec, Gallagher, Synectics, Commend etc.)., • IPAF and PASMA advantageous., • Fibre optic testing and splicing certifications advantageous. Personal Attributes, • Strong fault-finding and problem-solving capability., • Excellent communication skills., • Comfortable working independently across multiple sites., • Client-facing and professional., • Strong focus on quality, safety, and project delivery. Ideal Candidate Profile We are particularly interested in Commissioning Engineers who have previously commissioned Genetec-based security solutions on National Grid, utility, transmission, energy, oil & gas, or other critical national infrastructure projects. Candidates with experience delivering security systems through FAT, SAT, integration testing, and handover stages will be highly desirable. This aligns closely with experience gained on National Grid ISS security programmes involving systems such as Genetec, Gallagher, Axis, Commend, Synectics, and other integrated security technologies. Please click here to find out more about our Key Information Documents. Please note that the documents provided contain generic information. If we are successful in finding you an assignment, you will receive a Key Information Document which will be specific to the vendor set-up you have chosen and your placement. To find out more about Progressive please visit www.progressiverecruitment.com Progressive Recruitment, a trading division of SThree Partnership LLP is acting as an Employment Business in relation to this vacancy | Registered office | 8 Bishopsgate, London, EC2N 4BQ, United Kingdom | Partnership Number | OC387148 England and Wales JBRP1_UKTJ

The roleWe are building a modern orchestration platform to replace a legacy system of ad-hoc scripts that coordinate long-running, resource-intensive compute jobs across on-premises HPC/HTC infrastructure and cloud environments. The platform must give engineers clear visibility into multi-day job pipelines, respond intelligently to failures, and scale compute capacity elastically between on-prem hardware and the cloud during peak demand.This is a foundational, greenfield build. You will be the senior-most voice on infrastructure, security, and platform architecture, working closely with a software/application engineer who owns the orchestration logic and application-layer design. You'll set the technical direction for how the platform is deployed, secured, and operated — establishing patterns the rest of the team will follow, rather than discovering them through trial and error.We are intentionally vague here about the specific domain and tooling; the technical depth and architectural challenges are what matter, and we'll cover the specifics in interview.You will:Own the end-to-end platform architecture: from bare-metal/hypervisor layer through networking, cloud, and orchestration infrastructure.Design and implement the on-prem virtualization layer (e.g. Proxmox or equivalent) supporting compute clusters, control-plane services, and developer/test environments.Design hybrid cloud architecture (primarily Azure) including compute bursting strategy, cost controls, and workload placement between on-prem and cloud.Architect network topology: subnet design, VLAN segmentation, firewall rules, DMZ boundaries, and secure ingress/egress between on-prem HPC/HTC resources, cloud environments, and external services.Design and implement identity, authentication, and authorization: RBAC models, service accounts, SSO/federation, least-privilege access policies across platform components.Own secrets management strategy (e.g. Vault, Azure Key Vault, or equivalent) and ensure secrets are never hard-coded or leaked into logs/artifacts.Build and maintain Infrastructure-as-Code (Terraform) and configuration management (Ansible) to make environment provisioning repeatable, auditable, and version-controlled.Define and enforce security baselines: patching cadence, vulnerability scanning, network hardening, audit logging.Partner with the application development lead to define clean interfaces between infrastructure concerns (deployment, secrets, networking) and application logic (workflow/task design).Act as a technical mentor across the team on infrastructure and security topics — you are expected to unblock others quickly by applying established patterns, not by re-deriving them from scratch.Participate in incident response and capacity planning for production workloads.Evaluate and make build-vs-buy decisions for infrastructure tooling.About youCommitted to making your customers, stakeholders and colleagues successful, you’re an excellent communicator, listener and collaborator who builds trusted partnerships by delivering what you say, when you say. You’re curious, solutions orientated and a world-class problem solver who constantly seeks opportunities to innovate and achieve the best possible outcome to the highest imaginable standard.You will have:Extensive experience in infrastructure/platform engineering, with demonstrable ownership of production systems end-to-end.Deep hands-on experience with on-prem virtualization from bare metal (e.g. Proxmox, VMware, or similar hypervisor platforms) — not just cloud-only experience.Strong production experience with Azure (compute, networking, IAM, storage); familiarity with hybrid/multi-cloud patterns.Solid networking fundamentals: subnetting, VLANs, routing, firewall design, DMZ architecture, VPN/site-to-site connectivity.Practical experience designing and implementing RBAC, authentication/authorization systems (OAuth2/OIDC, SAML, service principals), and secrets management platforms (Vault, Key Vault, or similar).Strong Terraform experience (modules, state management, multi-environment patterns) and Ansible (or equivalent configuration management) for provisioning and configuration.Comfortable working in Linux-centric environments; strong shell scripting ability.Experience securing systems that bridge on-prem and cloud boundaries (e.g. HPC/HTC compute farms, hybrid data planes).Understanding of container runtimes (Docker and/or HPC/HTC-oriented alternatives like Apptainer/Singularity) and their networking/security implications.You might also have:Experience with Kubernetes for cloud-burst or elastic compute scenarios.Familiarity with workflow orchestration tools (e.g. Prefect, Airflow, Dagster) — not required to design flows, but useful for understanding deployment/runtime needs.Exposure to high-performance/scientific/technical computing environments (HPC/HTC schedulers, license-managed software, compute farms).Experience with observability stacks (Prometheus/Grafana, ELK, or equivalent).Prior experience in a regulated or IP-sensitive industry where security posture is critical.Who we areImagination is a UK-based company that creates silicon and software IP designed to give its customers an edge in competitive global technology markets. Its GPU and AI technologies enable outstanding power, performance, and area (PPA), fast time-to-market, and lower total cost of ownership. Products based on Imagination IP are used by billions of people across the globe in their smartphones, cars, homes, and workplaces.We need your skills to help us continue to deliver technology that will impress the industry and our customers alike, ensuring that people everywhere can enjoy smarter and faster tech than ever before.So come join us if you're wanting that something moreBring your talent, curiosity and expertise and we’ll help you do the rest. You’ll be part of one of the world’s most exciting companies who are one of the leaders in semiconductor IP solutions.As a part of our team, you can help us transform, innovate, and inspire the lives of millions through our technology.Additional informationIf you encounter accessibility barriers in the application process or if you have access needs and require support or adjustments to participate equitably in the recruitment process, please email recruitment@imgtec.com.

Our MissionAt Vertical Aerospace, we are pioneering the way for electric aviation. The Valo, our eVTOL (electric, vertical, take-off and landing), 'zero emissions' aircraft will set a new safety standard for how we will navigate the sky.We won't realise our mission following the same legacy processes and traditions our predecessors followed, instead, we want to 'redefine' aerospace best practices. We are growing quickly from a prototype business to a scaling SME, and the next few years will be critical to our success and delivering on our ambitious goals. Valo is targeting airliner-level safety certification in 2029 ahead of entering service with our airline and operator customers.What to ExpectWe're looking for a Platform Engineer who brings a software engineering mindset to infrastructure and operations, with a passion for automation, reliability, performance and security.You'll play a key role in maintaining and evolving our hybrid infrastructure, spanning Microsoft Azure, on-premises Hyper-V servers and Active Directory. From strengthening security and resilience to improving how we deploy, monitor and manage our platforms, you'll have the opportunity to make a real impact on the technology that supports our business.With Azure at the heart of our infrastructure and opportunities to explore AWS in the future, you'll also help shape our approach to modern, scalable cloud and hybrid platforms. Working collaboratively across teams, you'll champion automation, continuous improvement and secure, reliable ways of working.What You’ll DoOwn platform reliability and resilience, ensuring our cloud and on-premises infrastructure remains secure, available and able to support evolving business needs.Manage and modernise our hybrid infrastructure, including Azure cloud services, Hyper-V environments, Linux servers and Microsoft Active Directory.Drive automation and continuous improvement, using Terraform, Azure DevOps and scripting to simplify infrastructure management, reduce manual effort and improve consistency.Strengthen our security posture by identifying and mitigating vulnerabilities, applying security best practices and supporting compliance with ISO 27001.Maintain and test backup and recovery processes, including disaster recovery and business continuity plans, to ensure our platforms can recover effectively from disruption.Improve platform monitoring and performance, using observability tools to identify issues early, troubleshoot problems and optimise reliability.Collaborate with engineering and technology teams to improve deployment processes, support developer tooling and build scalable, efficient infrastructure solutions.Help shape our future platform strategy, exploring opportunities across Azure, AWS and emerging technologies to support a secure, automated and scalable environment.What You’ll BringStrong hands-on experience managing Microsoft Azure infrastructure, including virtual machines, scale sets, container services, Azure Kubernetes Service (AKS), storage and managed databases.Experience administering Hyper-V, Linux and Microsoft Active Directory environments, with a good understanding of hybrid infrastructure.Practical experience with infrastructure as code and automation, particularly Terraform, Azure DevOps and scripting languages such as PowerShell, Python or Bash.A solid understanding of platform monitoring and observability, using tools such as Datadog, Grafana or Prometheus to maintain performance and reliability.Experience applying security best practices, managing vulnerabilities and supporting compliance with frameworks such as ISO 27001.Experience managing backup, recovery, disaster recovery and business continuity processes, including regular testing and improvement.A proven ability to automate, scale and support production platforms, with a proactive approach to problem-solving, reliability and continuous improvement.Strong collaboration and communication skills, with the ability to work across technical teams, share knowledge and translate complex challenges into practical solutions.It would also be great if you bring:Experience with high-performance computing (HPC) environments in Azure, including Slurm workload scheduling.Familiarity with Kubernetes, Flux, Helm and GitOps approaches to infrastructure and application delivery.Experience developing or supporting internal developer platforms, CI/CD pipelines and automated development environments.Knowledge of PostgreSQL, MySQL or Microsoft SQL Server administration and performance optimisation.A good understanding of networking fundamentals, including TCP/IP, DNS, VPNs, VLANs and routing.Exposure to AWS or multi-cloud architectures, with an interest in helping shape future cloud platform capabilities.What can you expect from us?We're on a mission. Where others see limits, we see opportunity, and we work at pace. Working at Vertical isn't your average role but for those seeking a challenge, a flexible, supportive organisation and an incredible team; working here is an opportunity to do the best work of your career.Our approach promotes ingenuity and courage, while our environment builds success through diligence in safety and being open in the way we work. The only way we're going to assure the next chapter of aviation history is by working as a team, relentlessly, towards our goal. Our benefitsOur people matter - we're not going anywhere without them. Which is why our company benefits go beyond the essentials.26 days holiday, plus bank holiday5 extra days per year to buy (or sell)5 extra days holiday when you get married or enter a civil partnershipAdditional 4% of your salary to spend on extra benefitsAward-winning digital health and wellbeing service (Help@Hand)Company performance based bonus - rewarding company and individual performanceCompany Share Scheme - open to every Vertical employeeCompany Pension Scheme - 5% and we match itBreakfast on us, every dayWe may just be the hardest job you've ever had, but we're confident it will be the most rewarding. Join the team today and help us shape the future of Advanced Air Mobility.Disclaimer StatementWe encourage you to apply even if you may not have all the experience listed in the advert. We recognise that talent comes in various forms and we are committed to providing opportunities that create an environment of growth, diversity, and inclusion for everyone. As part of our desire to review and make our processes fair, we may ask you questions related to these aspects during the application process. For more information on how we will use your data, see our Legal section.LocationBristol OfficeEmployment TypeFull timeDepartmentDigital VA

Our MissionAt Vertical Aerospace, we are pioneering the way for electric aviation. The Valo, our eVTOL (electric, vertical, take-off and landing), 'zero emissions' aircraft will set a new safety standard for how we will navigate the sky.We won't realise our mission following the same legacy processes and traditions our predecessors followed, instead, we want to 'redefine' aerospace best practices. We are growing quickly from a prototype business to a scaling SME, and the next few years will be critical to our success and delivering on our ambitious goals. Valo is targeting airliner-level safety certification in 2029 ahead of entering service with our airline and operator customers.As a Flight Control Laws Engineer, you’ll take a leading technical role in developing the control laws for Valo. You’ll apply strong controls fundamentals and practical aircraft certification programme experience to solve novel engineering challenges, working from early requirements capture and validation through to design, testing and certification.You will hold technical ownership of a significant area of the control-law development and coordination of its delivery across multiple engineering disciplines. You’ll have the opportunity to influence important technical decisions on a novel aircraft programme moving at pace towards certification.What You’ll DoDesign, develop and deliver flight control laws for Valo.Lead a significant area of control law development from initial requirements capture and validation through to design, verification, flight testing and certification including the co-ordination of technical delivery and interfacing with relevant engineering teams.Develop and evaluate the control-law design using MATLAB, Simulink and model-based engineering approaches.Work closely with engineers across flight dynamics, systems, software, simulation, testing, certification and our test pilots to deliver an integrated solution.Use your certification programme experience to support definition and validation of the FCL programme planEngage with technical challenges beyond your immediate specialism, helping resolve complex cross-functional engineering problems.Make sound engineering decisions where information may be incomplete, balancing technical performance, complexity, certification and programme needs.What You’ll BringA strong grounding in classical control theory and extensive practical experience applying it to fixed wing or rotary wing aircraft.10+ years of relevant engineering professional experience in flight-control laws or GNC.Substantial hands-on experience with MATLAB and Simulink, including model-based design and development (DO-331).Knowledge and practical experience with aerospace standards including ARP-4754B, DO-178C, DO-331.Experience working on an aircraft development and certification programme (e.g. CS-23, CS-25, CS-27, CS-29 or equivalent) with an understanding of how flight controls progress through design, verification, testing and certification.Comfortable working effectively across engineering disciplines, able to communicate technical decisions clearly and contribute beyond your immediate area of expertise.Experience of modern control techniques would be beneficial.Relevant experience may come from fixed-wing aircraft, rotorcraft or other complex GNC applications where safety, control performance and rigorous development are critical.What can you expect from us?We're on a mission. Where others see limits, we see opportunity, and we work at pace. Working at Vertical isn't your average role but for those seeking a challenge, a flexible, supportive organisation and an incredible team; working here is an opportunity to do the best work of your career.Our approach promotes ingenuity and courage, while our environment builds success through diligence in safety and being open in the way we work. The only way we're going to assure the next chapter of aviation history is by working as a team, relentlessly, towards our goal. Our benefitsOur people matter - we're not going anywhere without them. Which is why our company benefits go beyond the essentials.26 days holiday, plus bank holiday5 extra days per year to buy (or sell)5 extra days holiday when you get married or enter a civil partnershipAdditional 4% of your salary to spend on extra benefitsAward-winning digital health and wellbeing service (Help@Hand)Company performance based bonus - rewarding company and individual performanceCompany Share Scheme - open to every Vertical employeeCompany Pension Scheme - 5% and we match itBreakfast on us, every dayWe may just be the hardest job you've ever had, but we're confident it will be the most rewarding. Join the team today and help us shape the future of Advanced Air Mobility.Disclaimer StatementWe encourage you to apply even if you may not have all the experience listed in the advert. We recognise that talent comes in various forms and we are committed to providing opportunities that create an environment of growth, diversity, and inclusion for everyone. As part of our desire to review and make our processes fair, we may ask you questions related to these aspects during the application process. For more information on how we will use your data, see our Legal section.LocationBristol OfficeEmployment TypeFull timeDepartmentEngineering Delivery & Design Organisation

Job Title: Lead Test Engineer (Electronic Systems) Location: Eastbourne (On-Site Working) Salary: £65,000 - £75,000 (+ Bonus & Benefits) Please Note: Only candidates with permanent, unrestricted UK working rights will be considered, as visa sponsorship is not offered for this position. Overview: On behalf of a key client in Eastbourne, Zenovo are looking for a Test Engineering Manager to lead the development and delivery of robust, scalable and repeatable test solutions for complex electronic systems. This role will oversee test strategy and development from initial concept through to full-scale manufacturing, ensuring high standards of quality, reliability and performance. A successful candidate will bring strong technical leadership, combining strategic planning with hands-on engineering expertise in Testing Electronic Products and Systems, as well as people management. This individual will work collaboratively with cross-functional teams to optimise test coverage, diagnostic capability, cost efficiency and production readiness. The role will also drive continuous improvement, platform reuse and effective knowledge transfer to operational teams, while minimising product failure risks. Key Responsibilities: • Lead the development of test solutions for complex electronic systems, covering test architecture, hardware, software, fixtures and diagnostics., • Define test strategies and apply Design for Test (DFT) principles to maximise test coverage, reliability and manufacturability., • Develop standardised, scalable test platforms and methodologies, promoting automation, repeatability and reuse., • Manage test development from concept through to production release, ensuring performance, quality and production readiness., • Lead complex fault investigations and drive improvements in test efficiency, reliability and cost., • Lead, coach and develop the Test Engineering team, building technical expertise and supporting individual growth., • Foster a culture of accountability, collaboration, innovation and continuous improvement., • Work closely with cross-functional teams to integrate test requirements and ensure a smooth handover into production., • Ensure test equipment and processes meet relevant safety, quality and compliance standards., • Maintain engineering governance through design reviews, validation, documentation and production readiness assessments. Required Skills & Experience: Essential: • Minimum 5 years' test engineering experience within electronics or systems development., • Strong experience in PCBA functional testing and/or in-circuit testing, ideally using Keysight or similar platforms., • Proven leadership experience, including team development, performance management and recruitment., • Experience defining test strategies, architectures and standards across multiple products., • Strong knowledge of Design for Test (DFT), diagnostics and test coverage optimisation., • Experience managing test development through NPI and into volume production., • Excellent problem-solving skills and experience leading complex technical investigations., • Strong communication and stakeholder management skills across engineering and manufacturing teams., • Understanding of safety, quality and compliance standards for test equipment., • Competent in ERP/MRP systems, preferably SAP, and Microsoft Office. Desirable:, • Degree in Electronics, Test, Manufacturing Engineering or a related discipline., • Experience applying Lean and continuous improvement tools., • Knowledge of SMT, through-hole assembly and common electronic failure modes., • Experience working with global engineering teams., • Experience developing modular and reusable test platforms. JBRP1_UKTJ

Our client is a technology consultancy. Ready to keep quality at the heart of projects with impact? Do you want to make a real impact by ensuring quality in services? Are you ready to grow your skills in a supportive, knowledge-sharing community where you can achieve your potential? We're a growing tech consultancy that creates user-centred solutions with purpose for our clients in government, healthcare and purpose-driven businesses. As a Quality Assurance consultant, you'll ensure that quality assurance is considered from the start through testing, questioning and improving. You'll apply your adaptability and communication skills across a variety of projects, working with a vibrant QA community that champions learning and knowledge sharing. The role You'll work on public and private sector projects. You'll likely be working as a lead software quality engineer on internal and client-facing projects, contributing to the leadership of teams. Leading by example and promoting our client approach, you'll support colleagues to develop knowledge and work through challenges in all testing types. You'll decide the best thing for your team to be working on. You'll collaborate with team members, clients and users to ensure that high quality is maintained and best practices are followed throughout the project. You'll adapt to different tools and technologies, advising on the best ones to use. You'll ensure that work is carried out in accordance with our client's quality, environmental, and information security policies and procedures, as well as applicable customer policies, standards, and procedures while working on client. Contractors at our client follow the same principles as permanent consultants. The roles are varied, technical, and never confined to any one provider or solution. Requirements Due to the nature of this role, applicants must either currently hold active Security Check (SC) Clearance or be eligible to obtain it. Eligibility typically requires UK citizenship and continuous residence in the UK for the past five years, with no single absence exceeding 28 consecutive days. As a result, we are unable to progress applications from candidates who do not meet these requirements. Technical Skills To succeed in this role, you must have experience working as a lead software tester on multiple complex projects and have a good understanding of what it means to be a senior consultant. In your CV and at interview, you'll need to show experience of: Your working area and how you apply this to your role Functional and non-functional automation testing Using tools like Playwright, Typescript and Gatling Carrying out accessibility testing against WCAG 2.2 standards using tools like JAWS and/or Dragon Creating test documentation Resolving complex issues and presenting to stakeholders Creating tasks from high-level requirements Defect triage Active SC clearance due to the nature of client work You'll need a good understanding of: Basic principles of programming paradigms, such as object-orientated programming and procedural programming The concepts and benefits of OAT testing Essential skills: As well as QA skills, there are essential core skills you'll need to be a great consultant. In the interview, we will assess how you have: Strong attention to detail and high-quality outcomes A methodical approach to resolving complex problems Respectfully challenged decisions or solutions communicated with technical and non-technical people Been proactive and taken the initiative in seeking solutions to mitigate risk Raised risks and issues through the correct tools Built relationships and resolved conflicts Led project meetings and contributed to workshops and events Other experience Some areas of experience are not essential but relevant to the role: UK government service standards Agile methodology Salary Up to £500 per day (working inside IR35) Where you'll work This role requires regular on-site attendance across our HQ, hub offices, client sites and home. Applicants must be able to commute to offices and client sites as part of their normal working arrangements, as travel is essential to fulfilling the responsibilities of the role. We include you We welcome candidates from all identities, attributes, ways of thinking and backgrounds to thrive in a career at our client. Our aim is for the diversity of our people to be reflected in the solutions we deliver, to help create a fairer society for all. Interview Interviews will be conducted via Microsoft Teams. We're happy to make adjustments to support your needs. Want to know more? Visit our website or email JBRP1_UKTJ

BMS Project Engineer What you will do Due to the expanding area served and increased workload, Johnson Controls are seeking a BMS Project Engineer to join our team. This role involves leading the most complex service, repair, design, and configuration of advanced building control systems to meet customer expectations. You will also develop, design, and test complex software programs and oversee the project site team, ensuring effective planning and execution. How you will do it • Deliver successful execution of complex building control system projects., • Develop, design, and test software programs to meet project specifications., • Oversee daily activities of the project site team and plan monthly routes for optimal efficiency., • Communicate effectively with customers to align project goals with expectations., • Conduct thorough project assessments to identify and resolve potential issues., • Maintain accurate documentation of all project phases and ensure compliance with safety and regulatory standards. What we look for: • Proven experience managing complex projects., • Hands-on experience with Building Management Systems (BMS)., • Strong programming knowledge., • Background in BMS installation., • Experience delivering multiple projects of mixed value., • Ability to travel within the South West region., • Excellent communication skills and ability to manage workload independently., • Strong organisational skills and attention to detail in a fast-paced environment., • Valid CSCS site card and SSSTS certification. What we offer Competitive salary, company car, overtime paid on top 25 days annual leave + Bank Holidays & Holiday Purchase scheme Pension, life assurance, EAP, referral scheme, retail discounts, Cycle to Work Discount on JCI security products Extensive training and development resources Career progression through structured ladders Inclusive and collaborative team culture Commitment to safety via Zero Harm policy Access to Business Resource Groups #LI-HN1 #LI-Remote #RMDFL JBRP1_UKTJ

A fantastic opportunity has arisen for a Systems Proving Engineer to join the Integration and Systems Validation team in the naval based air defence domain. Contracts have been won and more are expected, so the team is growing and this is a good time to join. This role covers the planning, running and reporting of trials, from laboratory-based integration trials through to harbour, sea and firing trials, working closely with the systems engineering and design teams. Key Responsibilities: • Working with the systems engineering and design teams to plan, generate and execute trials, • Liaising with the systems engineering and design teams to make sure enough trials data is captured, and to investigate and resolve design issues, • Producing trials documentation, • Preparing, delivering and following up internal and external Trials Readiness Reviews, • Carrying out post-trials data analysis and reporting, • Conducting and/or supporting trials, including laboratory-based functional integration and system trials, ground-based trials, harbour and sea trials, and firing trials, • Taking on lab management responsibilities, such as maintaining risk assessments, asset management, host audits and lab safety, • Maintaining hardware and software configuration control, • Travelling within the UK and possibly abroad, as the work requires The ideal candidate would have: • Experience of MBSE tools, for example DOORS, Rhapsody or RTC, • Experience of coding, especially Python (beneficial but not essential) The ideal candidate must have: • Experience of working in at least one of these areas: system integration; design proving and trials; naval integration; missile test; interface design; system assessment and acceptance; design verification; electrical / mechanical construction and interfacing; electronic design / test; or network integration, • The ability to communicate with a wide range of internal customers, sub-contractors, partners and suppliers, at both engineering and management levels This position offers a lucrative benefits package, which includes but is not limited to: • Company bonus scheme, based on company performance, • Strong employer pension contribution, • Opportunity for paid overtime, • Generous flexi leave allowance, with additional days available, • Flexible working arrangements welcomed, • Enhanced parental leave, covering maternity, adoption, shared parental and paternity leave, plus neonatal leave and fertility testing/treatment support, • Excellent on-site facilities, including subsidised meals and free car parking, • Healthcare cash plan, with cash back on everyday costs such as optical and dental If this role looks like your next challenge, please contact Jack ASAP or apply via this advert! Please note that due to the nature of the client's business, only candidates who currently hold full British Citizenship (without limitations) / Dual Nationality (inclusive of British Citizenship) will be considered. We endeavour to reply to every candidate, but if you haven't heard back within 10 days, please understand that you have unfortunately been unsuccessful for this position, or the position has been filled. Please call the office or send an email to discuss other potential positions. JBRP1_UKTJ

About The Role Engineered to Protect, that's our promise, we protect what matters - our nations, our waters, our land, our cities, our people, our environment, our world. The Product Safety Engineer is responsible for ensuring the company's products, systems, and engineered solutions are developed, assessed, tested, and supported in accordance with applicable safety legislation, industry standards, customer requirements, and internal safety processes. Product Safety Engineer will be based at either our Beckington, Bristol or Barnstaple sites. This role allows for flexible working with regular visits required to our Barnstaple site. The salary for this role is up to £64k, depending on experience. What you'll be doing • Lead and support product safety activities across the full engineering lifecycle, from concept and design through manufacture, delivery, operation, support, and disposal, • Identify hazards, assess product safety risks, and define proportionate risk reduction measures using recognised safety engineering techniques, • Knowledge of recognised safety and reliability techniques such as FMEA, FTA, HAZID, HAZOP, bow-tie analysis, ALARP assessment, reliability prediction, or safety case development, • Develop, review, and maintain safety documentation such as hazard logs, safety plans, safety assessments, safety cases, compliance matrices, and technical reports, • Work with systems, mechanical, electrical, software, manufacturing, quality, and test teams to ensure safety requirements are understood, implemented, verified, and traceable, • Review product designs, drawings, specifications, test evidence, and change proposals to confirm that product safety risks remain acceptable, • Support verification, validation, certification, and compliance activities, including product testing, design reviews, audits, inspections, and technical file preparation, • Provide product safety advice to project teams, suppliers, customers, and other stakeholders, • Monitor relevant legislation, standards, customer requirements, and industry guidance, and translate changes into practical engineering actionsAbout our company At SEA, we develop and deliver advanced solutions to make our world safer, cleaner and more efficient. We provide state-of-the-art applications for naval ship and fleet protection, and undersea surveillance systems. In-service across the globe, our systems deliver a rapid response to threats and system effectiveness and interoperation. Our systems support an ever-growing number of navies across the world, and we continue to bolster our already specialist, on-the-ground knowledge of key overseas markets. What we offer At our core, we encourage innovation, flexibility and out-of-the-box thinking to solve problems, so we're always looking for talented, flexible, and creative people to bring their best to SEA. In return we offer generous rewards, a fantastic work/life balance, and excellent career and training opportunities for everyone who joins. Have a look at the benefits we offer: Work life balance • Hybrid/flexible working arrangements, • 25 days' annual leave, plus buy and sell, • Up to 16 days flexi leave accrual, • Half day Fridays, • Reservists in the Armed Forces receive special paid leave Family & wellbeing, • Private medical health insurance & Employee Assistance Program, • Health Cash Plan, • All Staff Bonus, • Group Pension Plan of up to 8% employer contribution, • Cycle to work scheme, • Wellbeing Centre, • Sports & Social activities, • Employee Discounts portal - online and in-store discounts, travel savings, • Life assurance policy, • Publication and recruitment bonus rewards, • Development opportunities, including LinkedIn learningFacilities & resources, • Electric vehicle charging points at all sites, • Private seated lunch areas, • Onsite bistro (Barnstaple office) and free hot and cold beverages, • Onsite showers and toiletries provision, • Free onsite parking The skills you need, • Ideally professional registration or working towards registration, such as EngTech, IEng, or CEng., • Experience of working in an engineering, manufacturing, defence, or technology environment. manufacturing and/or experience of working with Defence Standards 00-056 Safety Management Requirements for Defence Systems, • Good understanding of hazard identification, risk assessment, risk reduction, and safety assurance principles, • Experience producing or contributing to engineering safety documentation, technical reports, verification evidence, or compliance records, • Strong written and verbal communication skills, with the ability to explain safety issues clearly to technical and non-technical stakeholders, • Structured, analytical approach with strong attention to detail and the ability to manage multiple tasks across projectsJoin us and be part of something smaller - with 500 people in the UK and Canada - doing something bigger: protecting what matters. If you'd like to know more, please give Kelly Thomas from our Talent Acquisition Team a call on 03330 414300. Or reach out to us on JBRP1_UKTJ

Role profileAfter a long period of sustained growth and increasing investment in cloud and AI capabilities, Osborne Clarke are looking to further strengthen our IT Operations function with bringing onboard a DevOps Engineer role based in our Bristol office.This hands-on engineering role will be pivotal in designing, building and improving the cloud platform foundations used by our IT and Software Engineering teams, with an initial focus on our new Azure Cloud Platform. You will help ensure secure, repeatable and supportable cloud environments, and work extensively with our Software Engineering team to build and operate AI capabilities across Azure and AWS.This is a full-time position based in Bristol offering hybrid working, with flexibility to meet deadlines as required and participation in a monthly Saturday server maintenance window.The roleThe DevOps Engineer will be a key member of our IT Services, IT Operations, DevOps and AI Technical Stream, promoting collaboration, team working and modern engineering practices. You will work closely with Software Engineering, End User Computing, Cyber Security, Enterprise Architecture, FinOps and Risk & Compliance to deliver robust cloud platforms and services that support the firm’s priorities.Other key responsibilities include:Cloud Platform Design & GovernanceDesign and build the foundations of our new Azure Cloud Platform, including landing zones, management structures, shared platform services and policy controls.Establish centralised ingress and egress patterns, aligned with network, security and governance requirements.Shape platform identity, subscription/account structures and architectural controls in collaboration with Enterprise Architecture and Cyber Security.Act as a subject matter expert for DevOps and cloud platform engineering, providing advice through project work, technical design and the IT service management system.Infrastructure as Code & CI/CDevelop reusable Infrastructure as Code modules and deployment patterns, using Terraform as the primary technology.Design, implement and maintain CI/CD pipelines for application and infrastructure delivery, principally using GitHub and associated automation tooling.Create standards, documentation, reference implementations and reusable patterns that make cloud engineering easier and safer for other teams.Maintain and improve Dev, Test and Live environments, ensuring clear ownership, accurate documentation and supportable operational processes.AI Platforms & Engineering CollaborationWork across Azure and AWS with the Software Engineering team to build and operate the infrastructure and deployment capability required for AI products and services.Apply common engineering standards and reusable deployment patterns to support AI and data workloads.Support the End User Computing team with the design, automation and delivery of Azure Virtual Desktop environments and their supporting Azure services.Coordinate and prioritise workstreams across teams in line with customer expectations.Monitoring, Security & Financial GovernanceDevelop monitoring, alerting and operational controls to identify failures, security issues, cost anomalies and performance problems before they affect users.Work closely with Cyber Security to ensure platforms and applications follow agreed security controls and relevant cloud best practices.Partner with FinOps to establish sensible cloud financial governance, including tagging, cost allocation, budgets, forecasting, optimisation and visibility of cloud consumption.Maintain a heightened awareness of the risks associated with elevated access permissions and Information Security, acting in line with our Information Security Policy and best practice.Service Management, Coaching & OperationsApply ITIL practices to the design, transition, operation and continual improvement of services, contributing to process review and improvement.Oversee and support release processes and product updates, using change, incident, problem and service management practices where appropriate.Provide DevOps and cloud platform expertise, mentorship and practical coaching to raise capability across IT Operations, Software Engineering and End User Computing.Lead DevOps and cloud platform work on both project and BAU activity within IT Operations, and provide regular assistance with BAU workload, including the monthly server maintenance window.Promote effective communication and a culture of mutual understanding across Business Services and the wider firm, acting as a professional service provider.We are looking forDemonstrable experience of delivering DevOps, cloud platform or infrastructure automation outcomes in a complex environment.Strong engineering judgement, with the ability to turn architectural direction and service requirements into working, supportable platforms.Proven experience of coordinating and prioritising workstreams across teams in line with customer expectations.Ability to produce clear, accurate technical documentation, standards and operational processes.Ability to manage multiple projects and deadlines, maintaining quality under time pressure.Experience of coaching and mentoring colleagues, explaining technical concepts clearly and identifying capability gaps.Strong communication skills, able to work effectively with stakeholders across IT Operations, Software Engineering, End User Computing, Cyber Security, Enterprise Architecture and FinOps.Practical understanding of the software development lifecycle and ITIL or IT Service Management practices, including incident, problem, change and continual improvement.Expert practical knowledge of Infrastructure as Code, with strong commercial experience of Terraform and the creation of reusable modules and deployment patterns.Strong experience of designing, building and maintaining CI/CD pipelines for both application and infrastructure delivery.Strong experience of at least one major cloud platform (Azure, AWS or GCP), with the ability to transfer engineering principles and practices between platforms.Experience of cloud platform or landing zone design, including identity, policy, network topology, shared services, subscription or account structures and governance controls.Knowledge of centralised cloud ingress and egress patterns, private connectivity, DNS, firewalls, load balancing and Zero Trust network principles.Experience of working with software engineering teams to deliver cloud-hosted applications and services; experience supporting AI or data platforms in Azure or AWS is desirable.Experience of monitoring, observability, vulnerability scanning, backup, recovery and operational assurance for cloud services.Understanding of cloud financial management and FinOps practices, including tagging, cost allocation, budgets, forecasting and optimisation.Experience of Azure Virtual Desktop or comparable virtual desktop platforms is desirable.Broad IT Operations knowledge, including network protocols and standards.Experience of ServiceDesk and incident, problem and change management solutions and workflow tools.Salary and benefitsWe offer competitive salaries and generous benefits. We value the health and wellbeing of our people and our wide range of initiatives and benefits support this.Our recruitment processPlease note that although we include closing dates for our roles as a guide, we review and progress applications on a rolling basis. At Osborne Clarke we do not make any recruitment decisions using automated decision-making. We are committed to providing an environment where you can perform to the best of your abilities at every stage of your recruitment experience and beyond. If you require any adjustments to be made during the application stage, interview process, or when working with us, please let us know in confidence.About YouAbout UsOsborne Clarke is an international legal practice with over 330 Partners and more than 1,260 talented lawyers in 26 locations. Our sector-based approach enables us to help our clients tackle the issues they are facing today, and prepare for the ones that they will face tomorrow. Advising them both comprehensively and commercially. We love working closely with our clients on new deals, products and solutions which will transform their businesses, markets and even sectors. And our unique approachable culture is not an added extra, it's fundamental to our success.At Osborne Clarke we value difference and encourage applicants from all backgrounds. We want everyone to feel that OC is a place where you can be yourself and belong, and our range of interest groups and diversity networks - not to mention our great teams - are a part of making that a reality. Services in India are provided by a relationship firmCareers Site Advertising End DateNot SpecifiedAll LocationsBristolAll Locations is a required fieldPositionITAdvertising SalaryNot SpecifiedContract TypePermanentFunctionBusiness Services

Sector: Defence, Security & CNIReference: BH-20249Validation and Verification Engineer – Software-Based Systems ð Location: Bristol (Hybrid – 4–5 days on-site per week) ð Salary: Circa 55,000 DOE + bonus, flexi-leave & benefits ð¡️ Security Clearance: Sole UK or Dual British National | SC eligibility required Join a specialist Validation and Verification team working at the heart of a high-impact Command & Control (C2) system – a critical capability for national defence and threat response. You’ll be part of a team ensuring complex software-based sub-systems are ready for real-world deployment. With significant cross-functional exposure and a strong systems engineering approach, this role offers a unique opportunity to see a product through the full lifecycle – from requirements capture to delivery. Your RoleSupport the development and delivery of Command & Control (C2) software systems.Define C2 test scenarios, success criteria and verification plans.Work closely with the Design Authority to confirm the appropriate verification approach.Contribute to complex systems engineering processes that ensure end-to-end functionality of software-led defence solutions.What We’re Looking ForStrong systems design or systems engineering experience, particularly with software-based equipment.Degree-qualified or equivalent professional experience in a relevant technical field.Familiarity with SysML, DOORS, or Rhapsody (desirable – training can be provided).Proven ability to work within secure development environments and manage complex validation frameworks.What’s in It for YouAnnual bonus (up to 2,500 depending on company performance)14% combined employer/employee pension contributionOvertime opportunities and up to 15 days flexi-leaveEnhanced parental, paternity, and fertility-related leaveSubsidised meals, free on-site parking, and exceptional facilitiesOngoing training and development in a mission-driven engineering environmentKeywords: Systems Engineer, Systems Design, Software Systems, Verification Engineer, Validation Engineer, Command and Control, C2 Systems, SysML, Rhapsody, DOORS, Software Validation, Defence Engineering, Software V&V, Requirements Testing, Test Scenarios, Secure Software Systems, Defence Jobs, Bristol Engineering, DV Cleared Jobs, UK Defence Careers Electus Recruitment Solutions provides specialist engineering and technical recruitment solutions to a number of high technology industries. We thank you for your interest in this vacancy. If you don't hear from us within 7 working days please presume your application has been unsuccessful on this occasion. You are of course free to resubmit your CV/details in the future and we shall assess your suitability at that time.Due to the nature of work undertaken at our client's site, incumbents of these positions are required to meet special nationality rules and therefore these vacancies are only open to sole British Citizens. Applicants who meet this criteria may also be required to undergo security clearance vetting to SC level.This is a permanent position.

Package: 64,000 – 75,000 (salary dependent on experience) + BenefitsRole ID: SF20616 Are you ready to be part of the future? At QinetiQ, we’re not just imagining tomorrow we are creating it. From cutting-edge defence technology to ground-breaking innovations our mission is to empower and protect lives. Join us as a Principal Systems Engineer at our Bristol site, where you will have the opportunity to work with cutting-edge technology in partnership with some of the most brilliant minds.The RoleAs a Principal Systems Engineer, you’ll technically lead complex or high value system refreshes on our MOD test ranges and lead the development of systems required to test our rapidly changing military equipment.Day-to-day, you’ll typically work with our Mission Rehearsal teams, across a suite of technologies and capabilities, from large area surveillance to precision tracking and stop-action systems, to the integration of customer/supplier platforms. You will work across one or more projects, delivering your portfolio of technical work alongside a Project Manager.You will Technically Lead delivery of the overall solution, by applying systems engineering principles and be hands-on producing your own systems artefacts. You will typically work across the full life cycle from concept to acceptance into service or may have a specialty focus area. Your responsibilities will include:Leading the technical delivery of complex/high value systems programmes, or groups of projects to time, cost and quality, working closely with Project/Programme ManagerDelivering systems engineering artefacts through project life from requirements through to transition to service, authoring own as well as peer-reviewing and guiding junior engineers to achieve required standardsActively engage with broad x-business stakeholder group throughout programme, to ensure understanding of the broader context, with high level view of requirements, risk and decision/change managementTailoring of project lifecycles and engineering governance approaches, advising and mentoring othersLeading technical, assurance, systems engineering activity across your area of expertise/programmesTechnically lead subcontracted activity, whether internal/external, ensuring statements of work, specifications and acceptance approach is achievable and that technical risk is transparent, reported and mitigatedEssential experience of the Principal Systems Engineer: Relevant specialism in Systems Engineering, or technical discipline, domain, platform with willingness to broaden expertiseProven track record leading technical programmes through project life and into serviceUnderstanding of engineering planning, monitoring and control, systems engineering, concurrent engineering, integration of engineering specialismsUnderstanding of engineering systems including safety critical and safety related functionsAdvanced knowledge of systems integration, including facilities, equipment, control systems, communication systems, software and ITEssential qualifications for the Principal Systems Engineer:Degree Level qualification or equivalent, MSc or higher degree preferred, or equivalent experienceWe value difference and we don’t have a fixed idea when it comes to background or education, provided you can show the required level of experience and willingness to learn then we would like to hear from you.This role is 37 hours per week based at our Bristol site (or we can consider any of our main UK locations) with a minimum average site attendance of three days per week. Travel to other QinetiQ and customer sites will be expected.QinetiQ operates state-of-the-art facilities across the UK that focus on defence, security and technology innovation. These facilities enable QinetiQ to conduct a wide range of research, testing and development activities that support both military and civilian applications helping to advance technology and support national security.Please note that all applicants for this role must be eligible for SC clearance, as a minimum.UKSV National Security Vetting Solution: guidance for applicants - GOV.UK (www.gov.uk)Our Recruitment Process:At QinetiQ we are committed to building an inclusive, accessible and welcoming workplace where everyone feels valued and supported. We believe that a diverse mix of backgrounds, perspectives and experiences drives innovation and leads to better outcomes for our people, customers and communities. We encourage applications from all candidates and are a disability confident committed employer. If you have a disability or need any reasonable adjustments during the recruitment process, please let us know by emailing internal_recruitment@qinetiq.com. One of our recruitment team will contact you.Many roles in QinetiQ are subject to national security vetting being completed, applicants who already hold the appropriate level of vetting may be able to transfer it upon appointment. A number of roles are also subject to additional restrictions, which means factors such as nationality or previous nationalities may affect the roles that you can be employed in.Why Join QinetiQ?As we continue to grow into new markets around the world, there’s never been a more exciting time to join QinetiQ. The formula for success is our appetite for innovation and having the courage to take on a wide variety of complex challenges.As a QinetiQ employee, you’ll experience a unique working environment where teams from different backgrounds, disciplines and experiences enjoy collaborating widely and openly as we undertake this exciting and rewarding journey. Through effective teamwork, and pulling together, you’ll get to experience what happens when we all share different perspectives, blend disciplines, and link technologies; constantly discovering new ways of solving complex problems in a diverse and inclusive environment where you can be authentic, feel valued and realise your full potential. Visit our website to read more about our diverse and inclusive workplace culture. Our BenefitsMatched contribution pension scheme, with life assuranceGenerous holiday allowance, with the option to purchase additional daysOptions to join Health Cash Plan, Private Medical Insurance and Dental InsuranceEmployee discount portal: Personal Accident Insurance, Travel Insurance, Restaurants, Cinema Tickets and much moreWe are proud to support the Armed Forces community by honouring the Armed Forces Covenant and maintaining our Gold Award standard in the Defence Employer Recognition SchemeVolunteering Opportunities - helping charities and local community#LI-RB1#UKD

World Class Defence Organisation based in Bristol is currently looking to recruit an ADA Software Engineer subcontractor on an initial 6 month contract, with very likely extension. The role will be onsite 4 days per week. A 4 day working week is OK (Monday to Thursday). Rate: £70.00 per hour Overtime Rate: Hours worked over the standard 37 hours per week, will be paid at ‘time and a quarter Location: Bristol Hybrid / Remote working: The role will be onsite 4 days per week. A 4 day working week is OK (Monday to Thursday). Duration: 12 Months with very likely extension. Contracts are often ongoing and long-term thereafter. IR35 status: Inside IR35 (Umbrella) Interview process: One stage video interview Job Description: Join our growing Software team in Bristol, working as part of a dynamic team to develop and deliver innovative solutions by exploiting a wide portfolio of software technologies. You will work as part of a small team and be empowered to work individually with little supervision. Responsibilities: To undertake a full range of engineering activities in line with relevant processes, quality and other requirements. The role will involve Ada code development and verification. The role will involve software V&V, primarily using target-based equipment containing the software under test and complex simulations of other Missile subsystems. Skillset/experience required: Experience of both UML (Rhapsody) and Ada (AdaCore). Knowledge of DOORs and IBM Config Management tooling (EWM) would be useful. Suitable skills and experience in Integration testing and debugging. Experience of working in High Dependability systems would be beneficial.

Software EngineerCompany:Boeing Defence United Kingdom LimitedAt Boeing, we innovate and collaborate to make the world a better place. All the relevant skills, qualifications and experience that a successful applicant will need are listed in the following description. We’re committed to fostering an environment for every teammate that’s welcoming, respectful and inclusive, with great opportunity for professional growth. Find your future with us.The team: The Software Engineering and Systems Integration team in the UK is actively working across Boeing Defence, Commercial Airplanes, Global services and Uncrewed technologies.The Software Engineering team works in the development of Synthetic Environment Sub-systems, Mission Systems Capability, Autonomous Behaviours, enhancement of Ground Control Systems, Technical Publications and various in-house proprietary tools for the Defence platforms. The team is also contributing to Commercial Modification of aircrafts, development of Onboard Network Systems, Cabin Interiors and supporting Supplemental Type Certification effort.The Role : We are now seeking a Software Engineer based in Bristol working across the growing Commercial Seat Certification statement of work (SoW) and contributing to the capability within defence portfolio.About the roleWe are seeking a Software Engineer in Bristol to support Defence and Security domains at Boeing locations and Customer sites across the UK, including Autonomous Systems, Training and Simulation, Cyber, Space, Intelligence and Security.As a consequence of our growing business we have a number of exciting career opportunities within our Software Engineering Capability, which is responsible for the Research and Development of Advanced Technology and the Design, Development and Certification of our Software systems and sub-systems.You will join a rapidly growing Engineering Capability with a culture for development, collaboration and success. Initially you will be assigned to our Simulation Programmes, which operate across the Air, Land and Maritime domains, with future opportunity to develop your interests across the breadth of the Software Engineering portfolio.We work in an exciting, faced-paced and dynamic environment, but your wellbeing is important to us and we strive to find a healthy life balance and with an ethical team culture and strong emphasis on openness, collaboration, innovation, safety and first time quality.Position ResponsibilitiesDesigns, architects, and develops simulation models, simulation visualizations, virtual environments/platforms and frameworks to enhance test performance, safety, and durability of software and hardware systems throughout the entire product lifecycle.Partners with stakeholders to review and identify simulation requirements and dynamics of the systems being simulated.Performs design, modelling, simulation, testing, and analysis to assess and optimize overall system performance and capabilities. Performs data collection and processing for use in simulations.Validates, verifies, and refines simulation software code, models, simulations, test procedures and test environments, executing test procedures and documenting test results and models against real-world data, test data, benchmarks, or other similar models. Documents and maintains technical code, algorithms, specifications and descriptions of simulation models.Partners with cross functional engineering teams to enable integration of simulation software with hardware devices and systems.Implements current and emerging technologies, tools, frameworks, and methods in the software engineering simulation environment.Modernizes, migrates, sustains, and updates simulation software to adapt legacy systems to new operating systems.Performs simulation software project management functions.Adopt, use and improve integration best practices and processes and capability enhancement tools developed to accelerate and optimise overall software integration processesCertification of Software to DO-178 considerations in airborne systems contributing to equipment certification.Contributing to reviews of Software Data items in collaboration with suppliers and Boeing teamsContributing to activities across various Stages Of Involvement (SOI) to ensure compliance to FAA or relevant Certification authorityParticipating in, and actively contributing to Planning (SOI-1), Requirements and Design (SOI-2), Verification (SOI-3), and Final Compliance Review (SOI-4). Basic QualificationBachelor of Science degree or higher from an accredited course of study in engineering, engineering technology (includes manufacturing engineering technology), chemistry, physics, mathematics, data science, or computer scienceAbility to obtain security clearancePreferred Qualifications (Desired Skills/Experience):5+ years of experience as, or working with Designated Engineering Representative (DER), or Technical Standard Order (TSO) Certification Specialist or EASA/FAA Compliance Verification Engineer (CVE) or equivalent5+ years of Experience in RTCA DO-178(B/C/D) Software Considerations in Airborne Systems and Equipment Certification, with emphasis on Embedded Software5+ years of Experience across Software Lifecycle Data Items, and Software standards such DO-330 and DO-331CommercialExperience working with Designated Engineering Representative (DER) or Technical Standard Order (TSO) Certification Specialist or Compliance Verification Engineer (CVE)5+ years’ experience developing, documenting and maintaining architectures, requirements, algorithms, interfaces and designs for software systems5+ years’ experience assisting with software engineering projectsExperience with Agile planning tool such as JIRA, GITLAB, or simillarDomain expertise in either Interior Cabins, Seats, In Flight Entertainment systems or Onboard Network SystemsDefence5+ years of Experience across Software Development Lifecycle and Software standards such as ISO9001.Strong understanding of the distributed interoperability simulation protocols used within defence collective training (e.g., DIS and HLA).Strong understanding and experience of the COTS simulation and training environment development, execution, verification, validation and deploymentsFamiliarity with Physics based Modelling and Simulation system Engineering principalsProficiency in C++, Lua Scripting or one of the similar programming languagesStrong understanding of object-oriented programming (OOP) and software design principles.Strong understanding of version control systems (e.g., Git, BitBucket etc).Knowledge of Agile development methodologies.Familiarity with DevOps, Automation and CICD concepts.Strong understanding of testing frameworks and unit testing practices & ability to guide junior team members.Ability to quickly resolve complex problemsAbility to build and maintain broad network of business/cross functional team relationshipsProduction SW release processesLocationThe primary locations for our Engineering teams is Bristol, with the general expectation of minimum 3 days a week in the office to foster collaboration and team efficiency. We will also consider applicants who may prefer to be based out of our Fleet offices, and potentially others dependent on the suitability of the candidate.PLEASE NOTE: The successful candidate will be expected to undergo a SECURITY CHECK.What Boeing offers you:The Boeing benefits package goes above and beyond, focusing on your physical, emotional, financial and social well-being. Here’s a snapshot of what we offer:Competitive salary and annual incentive plansContinuous learning • you’ll develop the approach and skills to navigate whatever comes nextSuccess as defined by you, • we’ll provide the tools and flexibility, so you can make a meaningful impact, your wayAn inclusive culture, • you’ll be embraced for who you are and empowered to use your voice to help others find theirsExcellent Adoption and Parental leave options23 days plus UK public holidays and a Winter Break between Christmas and New YearPension Plan with up to 10% employer contributionCompany paid BUPA Medical PlanShort Term Sickness: 100% pay for the first 26 weeksLong Term Sickness: 66.67% of annual salary from 27th week6x annual salary life insuranceLearning Together Programme to support your on-going personal and career developmentAccess to Boeing’s Well Being Programs, tool and incentivesLanguage Requirements:Not ApplicableEducation:Not ApplicableRelocation:Relocation assistance is not a negotiable benefit for this position.Security Clearance:This position requires the ability to obtain United Kingdom Security Check. xrnqpay Visa Sponsorship:Employer will not sponsor applicants for employment visa status.Contingent Upon Award ProgramThis position is not contingent upon program awardShift:Not a Shift Worker (United Kingdom)SummaryLocation: GBR, • Bristol, UK; GBR, • Fleet, UKType: Full time

Our client is a public sector technology consultancy. About our client Our aim at our client is to use human-centred technology to improve our society. We believe putting people at the heart of designing, building and delivering public services leads to better outcomes for everyone. Based within the Cloud & Engineering Practice, our Cloud Engineers help public sector organisations to deliver digital services that are highly available, reliable, resilient and secure. They are software engineers who tend to focus more on the successful deployment and operations of services than on functional development. They are adaptable and comfortable covering a range of disciplines such as DevOps, SRE and infrastructure architecture. About the role You will play a critical role in designing, implementing, and maintaining our clients' cloud infrastructure, ensuring it is secure, scalable, and highly available. You will provide dedicated cloud and infrastructure expertise within your team and advise on best practice. We expect our cloud engineers to have a background in and thorough understanding of software engineering. You will keep abreast of emerging technologies and be able to work collaboratively in a multi-disciplinary software delivery environment. You will be expected to maintain a broad technical knowledge across all major cloud platforms and build credibility by pursuing relevant certifications. Key Responsibilities Delivery of high quality cloud-based technical solutions for our clients: Act in a leadership capacity in cross-functional teams, particularly those where cloud engineering functionality forms an integral part of the team's output Act as a final decision maker on difficult technical issues, working in consultation with team members, and the client Collaborate within cross-functional teams to design cloud architectures that meet the client's requirements around scalability, performance, and security Deploy and manage cloud resources, containers, and related services using Infrastructure as Code (IaC) tools like Terraform or CloudFormation Configure and maintain networking, security, and access control in the cloud environment Implement and maintain robust security practices to protect data and resources in the cloud environment Develop and maintain automated processes for provisioning, monitoring, and scaling cloud resources, including the use of CI/CD pipelines to streamline application deployments Monitor cloud infrastructure for performance bottlenecks and proactively optimise resource usage Implement load balancing, caching, and content delivery solutions to ensure high availability and performance Design and maintain backup and disaster recovery solutions to ensure business continuity in the event of system failures or data loss Provide high tier support for client applications and infrastructure, including occasional on call cover Ensure any necessary compliance standards are met and certifications are maintained Evangelising the adoption of cloud technology and adherence to prescribed best practices: Act as a trusted specialist within our client, consulting with clients and working to enhance the profile and reputation of the company Stay up-to-date with industry trends and emerging technologies, and share knowledge with the team Collaborate with other teams within our client to ensure alignment with cloud best practices Line manage and mentor more junior colleagues to support their development, pursuit of career goals and management of their overall performance Act as a key member of our Cloud Practice, working as a thought leader and driving growth of our internal community Skills, Knowledge & Expertise Essential Significant prior experience in a cloud engineering leadership role, with a strong foundation in successfully building and deploying services in the cloud A deep knowledge of cloud platforms such as AWS, Azure and GCP Hands on experience delivering software using multiple programming languages, and a thorough understanding of modern software engineering best practices Deep experience with containerisation and orchestration tools (e.g. Docker, Kubernetes) Experience architecting cloud infrastructure, and taking it through to deployment and support Experience working within multidisciplinary teams with product, design, and technical disciplines all successfully collaborating An understanding of DevOps, SRE and Platform Engineering, and their places within a modern digital organisation Desirable Experience working in a technology consultancy environment Relevant cloud certifications such as AWS Cloud Practitioner, Developer, DevOps Engineer, Security, Advanced Networking or Azure Developer, Security, DevOps, Network Engineer Knowledge of cloud vendor partner programs, such as AWS APN and Azure Partners Experience with well-architected frameworks Knowledge of UK public sector technology guidance and frameworks, such as NCSC's Cyber Assessment Framework (CAF) and the Technology Code of Practice (TCoP) Familiarity with Python, Bash and JavaScript Agile practices such as Scrum, XP, and/or Kanban Experience using Test Driven Development (TDD) Job Benefits An increasing number of our customers are specifying a minimum of SC (security check) clearance in order to work on their projects. As a result, we're looking for all successful candidates for this role to have eligibility. Eligibility for SC requires 5 years' continuous UK residency and 5 year' employment history (or back to full-time education). Please note that if at any point during the interview process it is apparent that you may not be eligible for SC, we won't be able to progress your application and we will contact you to let you know why. Support in applying If you need this job description in another format, or other support in applying, please email . We believe we can use tech to make public services better. We also believe this can happen best when our own team represents the society that actually uses the services we work on. We're collectively continuing to grow a culture that is happy, healthy, safe and inspiring for people of all backgrounds and experiences, so we encourage people from underrepresented groups to apply for roles with us. When you apply, we'll put you in touch with a member of our talent team who can help with any needs or adjustments we may need to make to help with your application. We've put together this blog as a resource to share more about reasonable adjustments and some examples of what this could include. We also welcome any feedback on how we can improve the experience for future candidates. Life at our client We're committed to building a happy, inclusive and diverse workforce. You can get a sense of what it's like working here from our blog, where we talk about mental health, communities of practice and neurodiversity (as well as our client work and best practice). Like many organisations, we use Slack to foster a sense of community and connection. As well as special interest groups such as music, food and pets, we also have 10+ Slack channels dedicated to specific communities, allies, and identities as well as dedicated learning spaces called communities of practice (COPs). If you'd like to speak to someone from one of these groups about their experience as an employee, please do let a member of our client talent team know. Benefits We are always listening to our growing teams and evolving the benefits available to our people. As we scale, as do our benefits and we are scaling quickly. We've recently introduced a flexible benefit platform which includes a Smart Tech scheme, Cycle to work scheme, and an individual benefits allowance which you can invest in a Health care cash plan or Pension plan. We're also big on connection and have an optional social and wellbeing calendar of events for all employees to join should they choose to. Here are some of our most popular benefits listed below: 30 days Holiday - we offer 30 days of paid annual leave plus bank holidays Flexible Working Hours - we are flexible with what hours you work Flexible Parental Leave - we offer flexible parental leave options Remote Working - we offer part time remote working for all our staff Paid counselling - we offer paid counselling as well as financial and legal advice TPBN1_UKTJ

Description The Software Engineering team is looking for an experienced engineer to join a product team that works closely with the business in delivering and maintaining software for our internal and external customers. It is an agile product delivery environment with momentum from some recent big successes, with an exciting roadmap in place. Key aspects of working in an agile team at MO Focus on delivering working software Blending user (customer) feedback and best practice to evolve what we deliver Continuously inspect and adapt how we deliver software Utilise great testing principles, TDD & automation A "build to run mindset", ensuring the software / systems we build are easy to support and operate Attitude of improving life for other engineers so the next person will find things a little bit easier The team is greater than the sum of its parts Embrace AI to maximise your effectiveness Qualifications We are looking for a Software Engineer to join a growing team. For this role we would like someone passionate about the craft of software delivery to help build great software for our business. Minimum criteria You will have considerable commercial Java experience along with one or more technologies listed below (or a relevant equivalent). We are very much looking for applicants who have an aptitude and demonstrable passion for building great software, a willingness to learn and embrace new things and want to be a part of a supportive and empathetic cross-functional delivery team. If you have experience in any of the following areas, please get in touch Spring Boot microservices React and Node.js frontend web application development Database technologies e.g. PostgreSQL Messaging technologies e.g. ActiveMQ or Kafka Continuous Integration and Continuous Deployment Cloud platforms, e.g. AWS, and Kubernetes platforms e.g. OpenShift Who you'll be working with Working in an agile product team typically aligned to a domain boundary. This role will require you to work collaboratively with Engineers, Software Engineers in Test, BA, Product Owner and Scrum Master. Benefits Motability Operations is a unique organisation, virtually one of a kind. We combine a strong sense of purpose with a real commercial edge to ensure we provide the best possible worry-free mobility solutions to over 860,000 customers and their families across the UK. Customers exchange their higher rate mobility allowance to lease a range of affordable vehicles (cars, wheelchair accessible vehicles, scooters, and powered wheelchairs) with insurance, maintenance and breakdown assistance included. We are the largest car fleet operator in the UK (purchasing around 10% of all the new cars sold in the UK) and work with a network of around 5,000 car dealers and all the major manufacturers. We pride ourselves on delivering outstanding customer service, achieving an independently verified customer satisfaction rating of 9.8 out of 10. Our values are at the heart of everything we do. They represent ambition, and we look for our people to live and breathe them every day: We find solutions We drive change We care We operate hybrid working across the organisation where we split our time between working on-site at our offices, and at home, remotely within the UK. We believe hybrid working achieves a good work/life balance for our colleagues, allowing us to connect with each other, collaborate on important work, and perform together to deliver for our customers. It allows us to have the flexibility to work remotely up to 2-days per week whilst also using the great office spaces we have available. As a Motability Operations team member, the benefits you can expect are: Competitive reward package including an annual discretionary bonus 15% non-contributory pension (9% non-contributory pension during probation period) 28 days annual leave with option to purchase and sell days Free fresh fruit and snacks in the office 1 day for volunteering Funded Private Medical Insurance cover Electric/Hybrid Car Salary Sacrifice Scheme and Cycle to Work Scheme Life assurance at 4 times your basic salary to give you a peace of mind that your loved ones will receive some financial help Funded health screening for over 50s Voluntary benefits: charitable giving, critical illness insurance, dental insurance, health and cancer screenings for you and your partner, discounted gym memberships and season ticket loans Employee Discount Scheme with an app to save on the go Free access to healthcare apps such as Peppy, Unmind, Aviva Digital GP and volunteering app on Hand for all employees Generous family leave policies At Motability Operations, we believe in building a diverse workforce, where our people are empowered to attend work as their true selves, and we encourage people from all backgrounds to apply. We want to sustain a culture that nurtures, where employees are free to flourish and where they're rewarded equally, regardless of race, nationality or ethnic origin, sexual orientation, age, disability, or gender. We pride ourselves on being an inclusive employer and as such, all our offices provide first rate disability access. With our hybrid working environment, we do our best to accommodate part-time and flexible working requests where possible, building on our culture of trust, empowerment, and flexibility. TPBN1_UKTJ

Our client is a defence technology company. We're building the UK's next generation engineering powerhouse, providing critical technology that strengthens national security and resilience. We specialise in turning advances in sensing, AI, and communications into operational capability for the edge, where connectivity may be degraded or denied. Our work focuses on accelerating the deployment of technology, improving decision-making for frontline teams, and protecting people and critical assets in demanding environments. Headquartered in Bristol, our client employs around 200 people and operates over 20,000 square feet of engineering and manufacturing facilities. We have a growing international footprint and are one of Europe's fastest-growing engineering businesses. About the opportunity As a Field Engineer, you'll play a crucial role in this mission. You'll work directly with system users, configuring systems for deployment, providing training, testing new features, troubleshooting, and feeding back insights to our engineering teams. In short, you'll help us build systems people actually want to use. Your responsibilities will include configuring, deploying, and supporting systems across C4ISR (Command, Control, Communications, Computers, Intelligence, Surveillance, and Reconnaissance) and Robotics and Autonomous Systems (RAS) capabilities. You'll work closely with Systems Engineers, Software Engineers, Infrastructure Engineers, Integration Engineers and Product Owners to test and deploy novel systems on both UK and overseas exercises. This is a customer-facing role, so you will be representing the values and standards of our client. The role will involve domestic travel and occasional international deployments for periods of 4-6 weeks, up to twice a year. To recognise the impact of this travel, additional compensation will be provided. Candidates must be eligible for SC clearance. More information about security clearance is available here: Key areas of responsibility As a Field Engineer at our client, you will be responsible for: Maintenance, configuration, deployment, and support of C4ISR and RAS systems. First-line support: System configuration, bug reporting, and troubleshooting for deployed users. Testing new software features and providing feedback to inform development. Communicating with internal engineering functions, external customers, and other stakeholders. Delivering system training, both in classroom and field environments. Key skills, experience and behaviours Essential Due to the nature of our work, you must have lived and worked in the UK for the last five years to obtain Government security clearance. Proven ability to autonomously support customers, including systematic fault-finding, diagnosis, ad-hoc user training, and on-site provisioning. Fundamental knowledge of IP and networking. Proven ability to rapidly develop technical competence in complex systems, including operation, maintenance and fault diagnosis. Proven ability to confidently deliver technical briefs and demonstrations. Desirable (not essential) Familiarity with geospatial applications such as Team Awareness Kit (TAK). Understanding of fundamental military Standard Operating Procedures (SOPs) and organisational structure, particularly in tactical communications deployments. Experience with a command line interface to interact with basic Linux functions and scripts. A basic understanding of what cloud computing environments are. About You We're looking for someone who's passionate about technology and its application in real-world scenarios. While you'll gain plenty of experience in this role, you should already have: A desire to learn and continuously improve. A customer- and user-focused mindset with strong communication skills. A passion for delivering value to frontline users. Critical analysis and problem-solving abilities. Confidence in autonomous working as well as collaborating in cross-functional teams. A willingness to perform repetitive tasks to meet project goals. Working at our client We are committed to building a flexible, inclusive, and enabling company. Our aim is to create a diverse team of talented people with unique skills, experience, and backgrounds, so please apply and come as you are! We also recognise the importance of flexible working and support this wherever we can. We typically operate a flexible, hybrid-working model, with an average 3 days in the office each week (dependent on the role). We welcome the opportunity to discuss flexibility, part-time working requirements and/or workplace adjustments with all our applicants. Our client is a Disability Confident Committed company, and we actively encourage people with disabilities and health conditions to apply for our roles. Please let us know your requirements early on so that we can make sure you have everything you need up front to help make the recruitment process and experience as easy as possible. Finally, if you feel that you don't meet all the criteria included above but have transferable skills and relevant experience, we'd still love to hear from you! TPBN1_UKTJ

Our Vacancy# Senior EC&I Engineer Defence Permanent / Bristol United Kingdom 26/01/26 On site* ShareAssystem is an international company with one mission: accelerate the energy transition around the world. Every day, our 6,500 switchers located in 12 countries (Europe, Middle East, Pacific Asia & Africa) connect their six thousand billion neurons to tackle the task of the century: switching to low-carbon energy. We are a collective committed to the actors who are making the energy switch. Sharing our knowledge, expertise and values allows us to innovate and think differently about the energy transition. Drawing on more than 55 years’ experience in highly regulated sectors subject to strict security and safety requirements, we provide our customers with engineering and project management services, as well as digital services and solutions to optimize the performance of complex infrastructure projects throughout their life cycle. The Group is currently ranked second in the world for nuclear engineering. To ensure a viable, efficient, and reliable energy future for all.## Job DescriptionYour future team:We are seeking a highly capable Senior EC&I Engineer to support and lead engineering activities across a diverse portfolio of Defence work packages.This role spans the full engineering lifecycle — from early requirements and concept development through to detailed design, technical governance and assurance.As a Senior EC&I Engineer, you will work independently with minimal supervision, lead small discipline teams, support and mentor engineers, and take responsibility for producing high-quality engineering outputs. You will be central to shaping technical solutions, ensuring designs are safe, compliant, cost-effective, and aligned with client and regulatory expectations.Your missions: Develop EC&I and control system concepts from requirements through to detailed design Apply systematic engineering methods to ensure safe, compliant and cost-effective designs Produce technical solutions with minimal supervision, meeting client and project needs Use strong EC&I engineering knowledge and awareness of relevant technologies Apply applicable standards and regulations, including BS 7671 and LVD Identify, assess and mitigate design risks across the engineering lifecycle Consider environmental impacts in design and implementation decisions Support verification, validation and technical substantiation activities Build trust and maintain strong stakeholder relationships Collaborate effectively with multidisciplinary engineering teams Mentor and support junior engineers in developing their skills Promote good engineering practice, process adherence and professional standards Check and verify engineering work produced by others The Group is currently ranked second in the world for nuclear engineering. 70% of our managers are promoted from within. Buy and sell annual leave to make your time off work for you. Discount vouchers for days out and restaurants, eye test and glasses vouchers, cycle to work scheme, free flu jabsExperience/Qualifications: A degree in Electrical, Instrumentation or Control Engineering, or HNC/HND with substantial relevant experience A minimum of three years’ experience at Engineer grade or in an equivalent role Membership of a relevant institution (IET, IMC) and working towards Chartered status Strong experience delivering EC&I engineering in detailed design environments Proven ability to independently develop EC&I technical solutions meeting client and regulatory requirements Experience supervising others, providing technical oversight and leading small engineering teams Ability to check and review engineering work produced by others Strong communication skills, engaging effectively with technical and non-technical stakeholders Commitment to professional development and supporting others to grow their skillsDesirable Experience/Qualifications: Machinery design compliant with the Supply of Machinery (Safety) Regulations 2008 (Machinery Directive 2006/42/EC) Experience with nuclear safety cases and classification of Structures, Systems and Components Experience with Functional Safety Standards Experience working on BIM-enabled projects Knowledge of front-end safety system design, including legislation, standards and activities such as FMECA, HAZOP and HAZID Knowledge of electrical systems design, including calculations and EMC assessment Experience of software, hardware or embedded programming for machinery and process plant control Knowledge of instrumentation design techniques Experience with obsolescence managementSecurity clearance:Due to the nature of work to be undertaken applicants will be required to meet certain residency criteria in order to attain a minimum level of UK security clearance if not already security cleared to a minimum SC level.We are committed to equal treatment of candidates and promote, as well as foster all forms of diversity within our company. We believe that bringing together people with different backgrounds and perspectives is essential for creating innovative and impactful solutions. Skills, talent, and our people’s ability to dare are the only things that matter !. Bring your unique contributions and help us shape the future. #J-18808-Ljbffr

We are looking for a Lead Supportability Engineer with strong industry experience not necessarily within the domain of Supportability, but those with backgrounds in Electronics/Hardware or Systems would also be suitable. The Supportability department has a unique position within our business as it is involved in the full lifecycle of a programme, from Bid, Development, Production then Customer Support and eventually disposal. We draw engineers from many different disciplines such as Electrical and Electronic, Mechanical, and System Engineering to enhance the Supportability department. We expect our people to create strong working relationships with cross-department colleagues in Systems, Electronics, Mechanical, Software, Test Equipment, Quality and Industrial to identify problems on complex systems before they reach Production or the Customer. As a department, we have a strong focus on continuous improvement of our procedures and processes but also of our department itself and want anyone who joins to be part of that journey. This might include using your engineering talent to grow and develop the Supportability community and skill base through the mentoring, coaching and development of more junior members of the team or contributing to best practices to help drive out the cost and reputational consequence of failure. We can also help you develop your skills and offer great opportunities to develop, grow and progress in your career! As a Lead Engineer, you will be leading a team of Supportability Engineers who deliver a wide range of Supportability Engineering work packages. You will work closely with Project Managers, Operations and Project Engineering Managers from other functions within the Integrated Project Teams (IPT) to advise on Supportability requirements, provide analysis and offer guidance. • Reliability Analysis: Working with other disciplines, your team will develop component to system level reliability models, including the use of Reliability Block Diagram Methodology on electronic, power, RF, digital and mechanical systems to provide guidance to the design engineers., • Reliability Testing and Simulation (e.g. FEA, RGT, HALT, ESS): The Supportability team will create models to discover areas of concern and develop Reliability Growth plans and procedures to identify failure modes and propose Corrective action., • Maintainability Analysis: Your team will carry out modular to system level analysis that addresses Human Factors and Maintenance Task Analysis to identify Reliability Centred Maintenance and Scheduled Maintenance tasks , ensuring that the equipment meets it operational capability., • Testability Analysis: Your team will complete a FMECA analysis, working closely with Hardware engineers to establish the effectivity of fault detection and isolation of the equipment BIT and feed back omissions and improvements into the design process., • Product Safety: As part of a broader safety team, including Design Integrity and Systems Engineering, your team will carry out analysis of the design, its assembly, test and operation to complete an Intrinsic Product Safety hazard and Environment Impact Analysis, providing input to the Hazard Log, Safety Case and Fault Tree Analysis., • Production Support: Your team will be involved in analysis of production and in-service failure data (FRACAS), to identify and prioritise pattern faults. SE will work within a multi-discipline IPT team to identify Root Cause and Corrective action., • Support Strategy: You will help to develop a product’s In-Service Support strategy, using through-life cost modelling and many aspects of the above analysis. Alongside supporting the activities above, you will also: Ensure milestones are completed to schedule and budget while ensuring technical quality Provide expert input into Life Cycle Management reviews Work alongside the IPT to reduce cost and risk across the lifecycle and support any continuous improvement activities.Work with Supportability Head of Department to seek improvements to our methods and processes and topromote and implement improved ways of working within the Supportability department. Schedule, manage and Chair Sector Project Cost Review Boards (PCRBs) • Degree in a relevant engineering or science discipline., • Worked in industry, defence or have other relevant experience., • Strong experience of leading and developing teams, • Commercial and business awareness., • Experience in engineering management and delivery of project work packages, • Ability to manage complex situations with sound judgement and the ability to balance conflicting challenges We are particularly interested in receiving your application if you have experience in any of the following areas: Experience of working with, and supporting products throughout their whole lifecycle Working in multi-disciplinary teams to influence design by implementation of DfX, specifically those associated with Supportability such as Design for Supportability, Reliability, Maintenance, Testability and Safety Experience of implementing and undertaking Failure Modes Effects & Criticality Analysis (FMEA/FMECA) Knowledge of the many UK and International Standards applicable to Safety and RMT Availability analysis and modelling A working knowledge of the following tools and packages would be beneficial: MS Office packages; PTC Windchill;; Matlab/Simulink; Power BI; JIRA and Python This is not an exhaustive list, and we are keen to hear from you even if you might not have experience in all the above. The most important skill is a good attitude and willingness to learn. This role is subject to pre-employment screening in line with the UK Government’s Baseline Personnel Security Standard (BPSS). An additional range of Personnel Security Controls referred to as National Security Vetting (NSV) may apply, this could include meeting the eligibility requirements for The Security Check (SC) or Developed Vetting (DV). For more information and guidance please visit: gb/en/security-and-vetting At Leonardo, our people are at the heart of everything we do. We offer a comprehensive, company-funded benefits package that supports your wellbeing, career development, and work–life balance. Whether you're looking to grow professionally, care for your health, or plan for the future, we’re here to help you thrive. • Time to Recharge: Enjoy generous leave with the opportunity to accrue up to 12 additional flexi-days each year., • Secure your Future: Benefit from our award-winning pension scheme with up to 15% employer contribution., • Your Wellbeing Matters: Free access to mental health support, financial advice, and employee-led networks championing inclusion and diversity (Enable, Pride, Equalise, Armed Forces, Carers, Wellbeing and Ethnicity)., • Rewarding Performance: All employees at management level and below are eligible for our bonus scheme., • Never Stop Learning: Free access to 4,000+ online courses via Coursera and LinkedIn Learning., • Refer a friend: Receive a financial reward through our referral programme., • Tailored Perks: Spend up to £500 annually on flexible benefits including private healthcare, dental, family cover, tech & lifestyle discounts, gym memberships and more., • Flexible working: Flexible hours with hybrid working options. For part time opportunities, please talk to us about what might be possible for this role. For a full list of our company benefits please visit our website. Leonardo UK operates a grade-based salary framework with broad bands. The salary range shown reflects the approved grade band for this role, or a narrower hiring range published within that band, and is benchmarked against the external market. Exceptions above the standard range are managed through governance controls to protect internal equity. Leonardo is a global leader in Aerospace, Defence, and Security. Headquartered in Italy, we employ over 53,000 people worldwide including 8,500 across 9 sites in the UK. Our employees are not just part of a team—they are key contributors to shaping innovation, advancing technology, and enhancing global safety. At Leonardo we are committed to building an inclusive, accessible, and welcoming workplace. We believe that a diverse workforce sparks creativity, drives innovation, and leads to better outcomes for our people and our customers. If you have any accessibility requirements to support you during the recruitment process, just let us know. #LI-AP1 GB - Bristol - Coldharbour Lane GB - Basildon, GB - Lincoln, GB - Southampton Permanent Hybrid #J-18808-Ljbffr

Think you've seen it all in the lab? This role will put that to the test. As a Senior Staff Engineer - High-Speed Validation & Signal Integrity, you won't just be running test plans someone else wrote - you'll be shaping how next-generation semiconductor devices get validated before they ever reach the hyperscale data centres and networks that depend on them. This is deep, technically demanding work at data rates of 10Gbit/s and beyond, where the margin for error is measured in picoseconds and the stakes are measured in billions of connected devices. No two days will look the same: one week you're in new product design meetings, driving the test strategy for a device that doesn't exist anywhere else in the world yet; the next you're elbow-deep in the lab, pulling real signal integrity data out of silicon that's pushing the boundaries of what's physically possible. You'll have the technical credibility to be heard in the room, the autonomy to own your validation solutions end-to-end, and the kind of influence that shapes not just how a product is tested - but how it's designed to be testable in the first place. If you're the engineer other people come to when something doesn't make sense in the data, this is where that expertise finally gets the platform it deserves. This is senior-level validation work for someone who wants to lead from the bench, mentor the next generation of engineers, and help define the technologies the world will be running on for the next decade. Based in Bristol, we work closely with a world-renowned design group to develop advanced semiconductor solutions that power the digital infrastructure of tomorrow. Our culture is open, inclusive, and driven by innovation. Here, your ideas matter, your expertise is valued, and your work has a real-world impact - on the chips inside the networks that move the world's data. • Drive test feature development and strategy in new product design meetings, shaping how next-generation devices get evaluated, • Architect validation solutions for new products end-to-end - software, hardware, and documentation, • Identify and specify the bench-top test equipment needed to validate cutting-edge products, • Build sophisticated test automation software using Python or LabVIEW, • Collaborate closely with designers, product, test, and applications engineers as a trusted technical voice, • Lead validation review meetings and influence key product decisions, • Produce clear, authoritative validation reports that others rely on, • Get hands-on testing high-speed optical components, ICs, and modules at the bleeding edge of the industry, • Take precision lab measurements on products operating at data rates of 10Gbit/s and above, • Apply deep, hard-won knowledge of high-speed signal integrity to schematic entry and layout using Altium PCB tools, • BSc/MSc in Electrical/Electronic Engineering (EE/ECE) or a closely related discipline (or HNC/HND with equivalent work experience), • 6+ years of relevant experience in high-speed validation or lab-based test engineering, • A proven ability to thrive under pressure in a fast-paced, high-stakes R&D environment, • A natural collaborator who elevates the people around them, • Excellent interpersonal and communication skills, able to influence across technical and business audiences, • A relentless self-starter, comfortable mastering new tools and techniques independently, • Sharp analytical and problem-solving instincts, with an obsessive attention to detail, • A creative, innovative approach to engineering challenges others might walk away from, • Fancy being at the sharp end of how the world actually connects? Join an ambitious and collaborative engineering team at the cutting edge of global data communications., • Work on products that quite literally power the infrastructure connecting the world - from hyperscale data centres to 5G and PON networks, • Join a world-class validation team where your technical judgement genuinely shapes product direction, • Be part of a global organisation big enough to offer real international scope, yet agile enough for your individual impact to be felt and recognised, • Collaborate with some of the sharpest engineering minds in the industry, across Bristol and our international partner sites, • Enjoy a competitive, pay-for-performance compensation package that rewards the expertise you bring to the table Career Growth Philosophy At Semtech, we believe that innovation starts with people - and that includes those who've already built real expertise and want to keep sharpening it. That's why we're committed to empowering your professional development through mentorship, continued learning, and a collaborative, idea-rich environment at every stage of your career. Our pay-for-performance culture rewards initiative and celebrates meaningful contributions, however senior you are. Join us, and be part of a team that's building the future of connectivity - together. #J-18808-Ljbffr

zeroRISC zeroRISC is redefining chip security and supply chain integrity by empowering device owners and operators in crucial sectors like silicon production, IoT, and critical infrastructure with full device ownership, control, and visibility. Led by the founders of the OpenTitan secure silicon project, zeroRISC is driving commercial adoption of high assurance software and services rooted in open silicon. Our products forge an immutable connection between hardware and software, enabling users to trust their devices no matter where they’re built or where they’re deployed. As a zeroRISC SoC/ASIC Design Verification Engineer, you will develop, verify, and maintain silicon in security-sensitive settings, including root-of-trust technology. You will elevate and solidify zeroRISC's status as the leading provider of secure silicon IP by developing essential verification collateral. You will interact directly with zeroRISC customers to understand their requirements and deliver solutions benefitting both customer and zeroRISC alike. You will participate in the whole chip design process from architecture to tapeout and silicon validation. By engaging with the world's premier open-source silicon community, you will support our mission of open secure silicon everywhere. We're looking for engineers with strong design verification skills (and a long view of secure system architecture) who are also fast, flexible learners and enthusiastic about open source. • Verify ASIC/SoC functionality, performance, security, and power throughout the full chip design life cycle, from test plan definition to sign-off, • Build high quality verification environments at the chip/top and block levels following engineering best practices, • Write thorough verification documentation including test plans, • Diagnose, debug, and resolve regression failures and other errors, • Achieve coverage closure, • Ensure design functionality while upholding stringent timelines in collaboration with architecture, design, software, system, and silicon validation teams as well as engineering program managers, • Bachelor’s degree in Electrical Engineering or Computer Science, or a related technical field or equivalent experience, • 4 years of experience with simulation-based verification methodologies and languages such as UVM and SystemVerilog or formal verification-based techniques including industry standard tools, • Experience developing and maintaining testbenches, test cases, and verification environments for simulation-based verification or formal verification environments, • Master’s or PhD in Electrical Engineering or Computer Science, or a related technical field or equivalent experience, • Knowledge of security ASICs or accelerators (e.g. cryptography accelerators or GPUs), • Knowledge of computer architecture and memory subsystem architectures, • Experience verifying low power designs, • Experience with scripting languages such as Python, • Your work will directly contribute to the development of cutting-edge security solutions, protecting critical systems in industrial and IoT environments, • As a seed-stage startup, this role offers significant opportunities for learning and career growth, • Join a close-knit, innovative team where you can learn, grow, and contribute to building something meaningful in the security space #J-18808-Ljbffr

A platform you can believe in: Immersive One is the leading cyber resilience solution across the globe. Build and scale a best in class platform alongside a team of the brightest minds in cybersecurity! At Immersive, we’re uniquely positioned to future‑proof organizations against any cyber challenge. If that excites you, read on! Immersive helps prove and improve your cyber resilience, by simulating real‑world threats, testing your skills, and measuring performance. We put your readiness to the ultimate test. From sharpening technical capabilities to making high‑pressure decisions, our platform allows you to assess every angle, pinpoint areas for growth, and prove your ability to tackle evolving threats with unwavering confidence. Immersive was founded in 2017, from a cargo container in Bristol, UK we’ve grown to over 300 employees globally, announced funding of more than £150 million and been voted a Best place to work on multiple occasions! Immersive is hiring! Could you be our next Senior Front‑end Engineer? Come and join our established UK Engineering team as a Senior Front‑end Software Engineer – we are looking for someone curious, eager to solve problems, and excited to build alongside a collaborative team. Reporting to one of our Engineering Managers and based in our Bristol office, you will be a key part of building our Immersive One platform. You’ll join a team where we value determination, ingenuity, and pragmatic, reusable technical solutions. This is an exciting opportunity to be responsible for developing a truly ground‑breaking product. You will be instrumental in shaping the future of our product, working across our entire system landscape. Our tech stack includes: • Backend: Ruby on Rails, Node.js and Python, • Front‑end: React and TypeScript, • Testing: Playwright and TypeScript We are not just seeking a skillset – we are looking for someone who will also become an important and vital part of our team, so we seek a driven, curious and collaborative person to become our next colleague. You'll get to work in a friendly multi‑disciplinary agile team and also work on innovative ideas during our quarterly Hack Week, where collaboration between different teams is encouraged to find unique solutions. As a senior individual contributor in the team, your main responsibilities will include: • Work alongside the team to design, build, and maintain an efficient, reusable, and reliable codebase across the stack., • Collaborate with Product Managers and other disciplines to help translate requirements into technical solutions., • Partner with our Quality Experts to deliver automated tests, ensuring we have confidence in every feature we release., • Contribute to the team's success by fixing bugs, resolving incidents, and minimizing customer impact., • Help ensure code quality by sharing feedback with your peers via our code review process. You’ll get to immerse yourself in engineering projects. We want to give you a place where you’ll learn from us and we’ll learn from you through getting involved in the following: • Improving developer experience by reducing toil e.g. local development set up, CI/CD improvements, test suite optimisation etc. Architect and deliver step changes to our innovative product within small and focused project teams, • Design, build and maintain an efficient, reusable and reliable codebase, • Ensure the quality and maintainability of our code base e.g. by writing test automation, • Work on all parts of our system landscape. Fix bugs, resolve incidents, and participate in our well paid on‑call scheme (all within reasonable limits and using a self‑organised rota), • Translate technical language/concepts for non‑technical individuals written and orally, • Coaching / mentoring and pairing with other engineers, • Formulate technical solutions from product requirements in collaboration with others to create a first class platform Success in this role will depend most on your approach, underlying skills and potential for growth, even if some of the above would be new to you. Sounds good? We’d love to hear from you if you have proven experience in the following areas: • You have extensive experience in building complex web applications or similar software. You have been using Docker and potentially also Kubernetes., • Demonstrable, and up‑to‑date knowledge of best practices and patterns when working in a large, scalable frontend codebase, and familiarity with CI setups., • You have a solid understanding of relevant web technologies such as HTML, CSS, HTTP etc. The ability to critically review technical solutions and identify potential performance / design system / security / scalability issues., • You are willing and able to work with different programming languages and technology stacks. You prefer delivering real features over tech stack sophistication. The main parts of our system landscape are a Ruby on Rails back end, a React/TypeScript front end, a Node.js/TypeScript back end, and some Python services. Everyone has preferences and strengths, but we expect you to be able to work in all parts after a while., • Excited and driven to solve challenging problems in a high performing agile culture., • A strong ability to communicate complex technical problems to a wide range of audiences both written and verbal., • Seeks justification for introducing technical complexity to ensure the value / benefits outweigh the cost. You evaluate when adopting a new technology or “best practice” if it will deliver tangible benefits vs. when it will simply swap one set of problems for different ones., • Excellent understanding of Git, semantic HTML and CSS/SASS, using styled‑components., • Driven – We push the boundaries of innovation, acting swiftly to achieve ambitious outcomes. Our drive embodies a culture of ambition, where challenges are stepping stones to excellence., • Inclusive – Our strength lies in diversity, fostering a culture where every individual contributes to our collective strength. We champion open dialogue and empathy, ensuring a collaborative, inclusive workplace., • Customer Centric – We seek to develop deep relationships with our customers to help them achieve their business outcomes. We exceed our customers and partners' expectations by crafting products, services and experiences that surprise, delight and ensure they feel valued and supported every day., • One Team – We are a talented global team working together to achieve our vision. Central to our ethos, resilience means adapting and thriving in adversity. It guides our innovation, ensuring we and our clients are prepared for the future. We encourage people of all different backgrounds and identities to apply. We are committed to maintaining an inclusive, supportive place for you to be you and do your very best work. • Time off, flexible and remote working so you can work when is best for you, includes 25 days annual leave + 2 volunteering days and your birthday off., • The longer you are with Immersive, the more holiday days you get, up to a maximum of 30 days after five years of service., • Look after your family and yourself with enhanced parental leave, mindfulness groups, critical illness cover, 7% matched pension, private healthcare plan and more., • Career and learning development through the platform, a dedicated professional development fund and our ‘Learn Anything’ fund – which enables you to learn anything that’s not work!, • Recognition & Rewards for doing great work and living our values and behaviours., • Informal or formal flexible working options, e.g. flexible start and finish times, reduced hours., • We have a vibrant team culture with team events throughout the year. Our socials have included everything from pottery painting and paper mask making, to dungeons and dragons!, • When you do visit the UK hub, getting there is easy: we’re based in the centre of Bristol, just a 10 minute walk from the train station. We also offer railcard loan and cycle scheme to buy a new bike. Find out more about life at Immersive Labs Cyber threats wait for no one and neither should you. Apply now! If you would like to read more about what you can expect from our recruitment process, you can visit our dedicated interview process page. #J-18808-Ljbffr

Your in depth understanding of systems engineering at various stages of the systems engineering lifecycle and desire to learn will help you to support my client’s as a Senior Systems Engineering consultant. As a Systems Engineer, you will join a skilled, multi-disciplinary team providing leading Systems Engineering expertise to government and industry. You will have the opportunity to work for an independent Systems Engineering Consultancy providing the best in Systems Engineering, Training and Systems Thinking to government and industry. They work across a broad range of complex systems in a range of defence and civil sectors. Provide expertise across all kinds of sensors, effectors, handling, information, communication and combat systems, military platforms, for many different applications. A corporate benefits package and transparent career development opportunities are on offer within this vibrant Engineering environment. Our client currently requires a Systems Engineering Consultant to work across a range of activities at various stages of the systems engineering lifecycle. • Research and concept development of systems solutions., • Development and management of system requirements including the use of tools such as DOORS and RDL., • Development of abstract architectures to describe systems:, • Using languages such as UML and SysML., • Using tools such as Rhapsody, SparxWorks Enterprise Architect, MooD., • Using frameworks such as MoDAF and NAF., • Design process engineering for hardware, software and mixed technology systems., • Systems safety engineering, including the analysis of the systems safety requirements., • Systems integration, including structuring and partitioning of complex systems., • Systems performance evaluation and its application to verification and validation., • System Integrity analysis including resilience and impact assessment., • Through life environmental impact evaluation of complex systems., • Systems qualification and acceptance., • A leading practitioner of Systems Engineering activities across several areas of activity, experienced in more than one phase of lifecycle., • A background in systems or similar engineering discipline within a complex engineering environment, often with related procurement experience., • A minimum of a technical Degree, equivalent qualification or experience., • Comfortable with resolving ambiguity in task, system and requirements definition., • Communicating effectively with a variety of stakeholders, • Delivery focussed with determination to make a positive difference, • Flexible and adaptable, • Experience in working closely with demanding customers., • Experience in a relevant technology discipline, process or tool. Bristol or Reading Keywords: Systems engineer, Hardware, Software, Defence, Requirements management, Design, Integration, Acceptance, Analysis, V&V, Test, DOORS, Military, System, Sub-system, UML, SysML, MoDAF. Electus Recruitment Solutions provides specialist engineering and technical recruitment solutions to a number of high technology industries. We thank you for your interest in this vacancy. If you don't hear from us within 7 working days please presume your application has been unsuccessful on this occasion. You are of course free to resubmit your CV/details in the future and we shall assess your suitability at that time. Due to the nature of work undertaken at our client’s site, incumbents of these positions are required to meet special nationality rules and therefore these vacancies are only open to sole British Citizens. Applicants who meet this criteria will also be required to undergo security clearance vetting, to SC level. #J-18808-Ljbffr

Verification and Validation Test Engineer now needed in Bristol to work with a leading global company. *Salary to £64k plus super benefits* Suitable applicants need to have strong Verification and validation expertise gained in in an Embedded environment with experience of turning requirements into structured test cases and procedures, scripting expertise, experience working in a lab environment. You will require the following skill set: • Strong experience of Verification and Validation (V&V) activities in an embedded software environment., • Embedded software development experience using Ada., • Experience of working in a lab environment, • Good working knowledge of the complete software engineering lifecycle., • Scripting abilities It would be desirable to have knowledge of Safety critical systems experience, Knowledge of standards such as DefStan 00-55, DO-178C & DO-330, RTOS, Test Automation and DOORS Due to the nature of our clients work all applicants will need to be British Citizens. Great salary and benefits on offer, please send your Cv to Emma Windows at IC Resources #J-18808-Ljbffr

Graphcore is seeking a Staff System Software Engineer to own the test strategy and validate next-generation drivers for production readiness. You will shape how Graphcore validates complex device drivers and platform tools, with depth across Linux kernels, drivers and systems software. You will design, build, execute and report tests across component, system and acceptance levels, debugging issues with hardware and software tools, simulators and emulators. #J-18808-Ljbffr

World Class Defence Organisation based in Bristol is currently looking to recruit an ADA Software Engineer subcontractor on an initial 6 month contract, with very likely extension. The role will be onsite 4 days per week. A 4 day working week is OK (Monday to Thursday). Rate:£70.00 per hour Overtime Rate: Hours worked over the standard 37 hours per week, will be paid at 'time and a quarter' Location: Bristol Hybrid / Remote working: The role will be onsite 4 days per week. A 4 day working week is OK (Monday to Thursday). Duration: 12 Months with very likely extension. Contracts are often ongoing and long-term thereafter. IR35 status: Inside IR35 (Umbrella) Interview process: One stage video interview Join our growing Software team in Bristol, working as part of a dynamic team to develop and deliver innovative solutions by exploiting a wide portfolio of software technologies. You will work as part of a small team and be empowered to work individually with little supervision. • To undertake a full range of engineering activities in line with relevant processes, quality and other requirements., • The role will involve Ada code development and verification., • The role will involve software V&V, primarily using target-based equipment containing the software under test and complex simulations of other Missile subsystems., • Experience of both UML (Rhapsody) and Ada (AdaCore)., • Knowledge of DOORs and IBM Config Management tooling (EWM) would be useful., • Suitable skills and experience in Integration testing and debugging., • Experience of working in High Dependability systems would be beneficial #J-18808-Ljbffr

Defence Bristol Based SC Clearance Eligible Required must be British Nationals due to secure environment We're recruiting for a Systems Engineer to join a team delivering complex, multidisciplinary training systems within a highly secure environment. This is a fantastic opportunity for a hands-on engineer who enjoys taking systems from concept through to integration, testing, and deployment. The role is focused on practical engineering and system integration rather than purely documentation-based systems engineering. • Translating system requirements and architectures into deployed, operational solutions., • Supporting requirements, design, integration, verification, and testing activities across the full system lifecycle., • Integrating and configuring hardware, software, operating systems, peripherals, and networking infrastructure., • Performing system bring-up, installation, deployment, and commissioning activities., • Executing system verification and validation testing., • Diagnosing and resolving issues across hardware, software, and interfaces., • Producing technical documentation to support deployment and operation of systems., • Working on-site during integration and deployment phases to ensure successful delivery. Experience in Systems Engineering, Systems Integration, Test & Integration, or a related engineering discipline. Experience working across the system lifecycle, including: • Requirements, • Design, • Integration, • Test & Verification Strong hands-on experience with: • Hardware integration, • System configuration and deployment, • Networking, • OS and application installation, • Troubleshooting complex technical issues Understanding of system-level behaviour, interfaces, and multidisciplinary engineering environments. Due to the nature of the programme, applicants must: • Be a British National, • Be eligible to obtain SC Clearance, • Be comfortable working within a secure environment If you're a practical, hands-on Systems Engineer who enjoys building, integrating, testing, and deploying complex systems, I'd be keen to speak with you. #J-18808-Ljbffr

At Graphcore, we’re building the future of AI compute. We’re a team of semiconductor, software and AI experts, with deep experience in creating the complete AI compute stack - from silicon and software to infrastructure at datacenter scale. As part of the SoftBank Group, backed by significant long-term investment, we are delivering key technology into the fast-growing SoftBank AI ecosystem. To meet the vast and exciting AI opportunity, Graphcore is expanding its teams around the world. We are bringing together the brightest minds to solve the toughest problems, in a place where everyone has the opportunity to make an impact on the company, our products and the future of artificial intelligence. As a research engineer at Graphcore, you will contribute to the advancement of AI research, investigating new ideas that push the limits on important AI/ML problems. Specialized hardware has been the key driver of the progress of AI over the last decade, and we believe that hardware-aware AI algorithms and AI-aware hardware developments will continue to be critical to advancing this exciting field. We are therefore looking for individuals who combine strong machine learning experience with practical engineering skills to deliver impactful AI research. We are seeking AI researchers with strong software engineering experience, particularly in lower-level programming and performance optimisation for hardware efficiency. Our research spans a broad range of topics, including efficient training and inference, world models, life sciences, reinforcement learning, and beyond. You will work closely with researchers to generate ideas and translate them into scalable implementations, contributing to publications and projects that help to steer the future of AI hardware. Graphcore Research participates in both fundamental and applied research, to characterise the computational requirements of machine intelligence and to demonstrate how hardware can drive the next generation of innovative AI models. We publish at leading AI/ML conferences (NeurIPS, ICML, ICLR) as well as specialist workshops, and collaborate with other research teams and organisations across the world. We pride ourselves on being a supportive and collaborative team, where we organise around our individual research interests to solve problems together in domains such as efficient compute, model scaling and distributed training and inference of AI models for multiple modalities and applications, including for sequence- and graph-based data. We’re based across London, Cambridge and Bristol, with projects and discussions that involve all our locations. Perhaps the best way to get an idea of what we’re all about is to read one of our papers or an article on our blog. If you’re excited to work at the cutting edge of AI supported by new hardware and want to develop your skills in this area, we’d love to hear from you! • Generate AI/ML ideas, design experiments, implement them and evaluate results., • Prepare, submit and present your work to AI conferences and workshops., • Provide technical insight to internal teams by designing experiments and delivering clear, actionable reports., • Collaborate with researchers, silicon and software engineers at Graphcore to help define, build and test Graphcore’s next generation of AI hardware. Essential: • Master’s, PhD or equivalent experience in a technical discipline (e.g., Maths, Statistics, Computer Science, Physics, Chemistry)., • Python programming in a modern deep learning framework, e.g. PyTorch or JAX., • Familiar with deep learning fundamentals: models, optimisation, evaluation and scaling., • Capable of designing, executing and reporting from ML experiments., • Lower-level programming for hardware efficiency, e.g. C++/CUDA/Triton., • Practical familiarity with hardware capabilities for deep learning – threads, caches, vector & matrix engines, data dependencies, bus widths and throttling., • Practical familiarity with software stacks for deep learning – compilation, kernel fusion, XLA #J-18808-Ljbffr

We are seeking a Senior Systems Engineer with deep experience delivering requirements-based testing, IVVQ campaigns, and end‑to‑end trials across complex, safety‑and mission‑critical defence systems. You'll lead laboratory, rig, field, and sea trials, coordinating multidisciplinary teams and ensuring compliance, certification, and airworthiness objectives are met across development cycles. This role is pivotal in planning, executing, and documenting test activities that keep our platforms and subsystems safe, reliable, and compliant. • Lead planning of trials and test phases for complex systems, covering integration, verification, qualification, training, maintenance, and in‑service support, • Coordinate multidisciplinary teams (IVVQ, maritime ops, contractors/suppliers, pilots/crew, training, maintenance) to align resources, schedules, and milestones, • Develop test strategies, integrated schedules, readiness checklists, and comms plans for lab and field execution, • Define and decompose system/subsystem requirements; ensure end‑to‑end traceability from capture to test execution and reporting, • Utilise DOORS (or equivalent) for requirements management; manage configuration baselines and changes using PVCS (or equivalent), • Establish robust requirement‑to‑test‑case linkages and coverage metrics, • Author Test Plans, V&V Plans, Statements of Work, Test Readiness Reviews, and Acceptance Criteria for hardware and software, • Produce automated and repeatable test scripts (proprietary and industry‑standard); define test data and orchestration approaches, • Generate test reports, compliance evidence, and certification artefacts supporting airworthiness/qualification submissions and platform approvals, • Design, commission, and manage test rigs for avionics, fuel systems, and mission systems, • Configure engineering interfaces for ARINC 429, MIL‑STD‑1553, AFDX, analogue/discrete I/O, and power distribution, • Conduct unit, integration, HIL/SIL testing on supplier and in‑house rigs; validate equipment functions and system behaviour in simulated and operationally representative conditions, • Lead sea trials and platform tests (maritime and aerospace) including integration, fault isolation, and corrective actions, • Organise daily test activities, liaising with pilots, crew, and operational teams; manage trial resources, logistics, and safety, • Execute trials across diverse environments (e.g., Plymouth, UK; Brest, France), ensuring alignment to CONOPS and qualification objectives, • Own V&V campaigns from strategy through execution, analysis, and reporting, • Ensure requirements‑based coverage, maintain defect/issue registers, drive root‑cause analysis, and implement corrective/preventive actions (CAPA), • Produce Verification Reports and compliance evidence for airworthiness/qualification, • Define and execute regression test suites to assure compliance through iterative updates, • Map tests to certification and platform requirements; adhere to industry‑standard procedures and documentation, • Analyse in‑service issues; develop engineering solutions and implement updates to service and maintenance instructions, • Review and coordinate updates to software release notes, O&M manuals, and training materials with customers and specialist teams, • Plan and execute environmental and qualification‑oriented trials (e.g., thermal, vibration, EMC as applicable to role/scope), • Align test artefacts to environmental objectives; compile evidence for type approval and certification, • Support safety case development, installation readiness, and certification preparations for trials and integration activities, • Maintain configuration, data control, and secure handling in compliance with secure development and trials environments, • Proven experience as a Systems/IVVQ/Test Engineer in the Defence or Aerospace sector delivering complex platforms or subsystems, • Strong background in requirements engineering and traceability (e.g., DOORS), and configuration control (e.g., PVCS or similar), • Hands‑on expertise with lab/rig testing and field/sea trials; confident with fault‑finding and root‑cause analysis on platform, • Demonstrated knowledge of avionics/mission systems and interfaces: ARINC 429, MIL‑STD‑1553, AFDX, analogue/discrete I/O, • Ability to author test strategies, plans, procedures, scripts, and reports; strong documentation and compliance mindset, • Experience managing V&V campaigns, regression testing, and preparing certification evidence, • Familiarity with environmental/qualification testing principles and evidence generation, • Excellent stakeholder management across operators, crew, suppliers, and customers; able to lead multidisciplinary teams, • Eligible for/holding UK Security Clearance (SC/DV), • Experience with HIL/SIL, Python/MATLAB/LabVIEW or similar for automation and data analysis, • Exposure to model‑based systems engineering (MBSE) tools and methods, • Knowledge of airworthiness/Defence standards (e.g., DEF STAN, DO‑178/DO‑254 context, ARP4754A, ISO 15288) appropriate to role focus #J-18808-Ljbffr

Location: Reading, United KingdomThales is a global technology leader with more than 83,000 employees on five continents. Interested in learning more about this job Scroll down and find out what skills, experience and educational qualifications are needed. With over 7,500 people in the UK, operating across defence, space, aerospace, and digital security, we help build a future we can all trust. Thales supports the security and stability of our nation by providing extraordinary technology to our customers, as well as delivering social value to the UK with our products and services.Embedded Systems & Integration Engineer • UASReading, Bristol, Crawley ideally, but flexible on locationThales Intelligence, Surveillance and Reconnaissance (ISR) UK is a principal supplier of Electronic Warfare (EW), Radar and Uncrewed Aerial Systems (UAS) equipment to the UK armed forces, as well as an exporter of these capabilities worldwide.We’re recruiting for an experienced Embedded Systems / Software Integration Engineer to develop and integrate software for an edge-computing system based around NVIDIA Jetson.The role will involve integrating a range of hardware and software components into an existing system, including digital cameras, IMUs, GNSS, SSD storage and other peripheral devices. Responsible for ensuring that these devices operate reliably with the Jetson platform and that their data is correctly delivered into existing C++ processing and algorithm software.A significant element of the role will be the integration of new and alternative hardware into an existing system. This may include, for example, moving an existing Jetson application onto a new carrier board, integrating different cameras or sensors, adapting interfaces and drivers, and reconfiguring the software and operating system to accommodate changes in the underlying hardware, developing software interface specificationsThe role therefore requires someone who is comfortable working across the boundary between hardware and software, rather than someone focused solely on application-level software development.There will be travel involved so the successful individual should be prepared to travel to Ukraine (all training and briefings will be provided)Key ResponsibilitiesJetson / Embedded LinuxDevelop, configure and maintain software running on NVIDIA Jetson Orin Nano platforms.Work extensively with Ubuntu Linux in an embedded environment.Manage system resources including:Diagnose and resolve hardware/software integration problems.Configure boot, system services, device configuration and application start-up.Hardware and Peripheral IntegrationIntegrate and configure hardware peripherals including, but not limited to:Carrier Board IntegrationA key responsibility will be adapting the software platform to accommodate changes to the underlying hardware.For example:Integrating a new Jetson carrier boardIdentifying differences in peripheral interfaces and hardware configuration.Key skills and experience requiredThe successful candidate should be comfortable working from hardware documentation, schematics, interface specifications and manufacturer documentation rather than relying solely on pre-existing software abstractions.C++ Algorithm IntegrationIntegrate sensor and peripheral outputs into existing C++ algorithms and processing pipelines.Develop interfaces between hardware acquisition software and existing application/algorithm code.NVIDIA CUDA / GPUDevelop, integrate and optimise software using NVIDIA CUDA where appropriate.Understand the Jetson GPU architecture and its implications for application performance.Cyber SecurityApply appropriate cyber-security principles to embedded Linux systems.Configure systems securely and minimise unnecessary services and interfaces.System Integration and VerificationDevelop integration and diagnostic tools as required.Create appropriate test procedures for hardware/software integration.Test new hardware components against the existing system.Security Clearance statement Due the nature of the work that we do at Thales, many of our roles are subject to security restrictions. This role requires you to be a sole British National and achieve Security Clearance (SC) without any caveats. It would be advantageous if currently held, however, if not currently held, it is a requirement that the successful applicant undergo, achieve, and maintain SC Clearance prior to commencing employment. Please visit the UKSV website for further guidance- United Kingdom Security Vetting • GOV.UK ( )To be eligible for full SC, you generally need to have resided in the UK for the last 5 years. In some circumstances, a minimum of 3 years’ residence in the UK over the last 5 years may be accepted, with additional overseas checks.Your Career at Thales UKFuture opportunities will allow you to discover other domains or sites. You will be able to evolve and grow your Competencies in different areas: Room and attention to personal development Build your talents in another domain of Thales Group, discovering new products, new customers, new country or go to a more complex Solution Choose between a technical expertise or a leadership path Build an international career within a leading Engineering Group What we can offerWe are committed to giving you opportunities to be your best. We believe in embracing the passion and potential of our people, and to achieve this we offer market leading training, development and experiences, along with the opportunity to be mentored and coached by some of the smartest minds in the industry. We hire from within as our first priority, so you’ll have a myriad of opportunities within our diverse, global organisation.Our packages will include bonus, a strong pension contribution, private healthcare, development focused targets and relocation support can be provided if required along with a variety of learning, development and career enhancement opportunities. Further support can be provided towards academic and membership attainments.#LI-CL1At Thales, we ensure equal opportunities, pay and working conditions for all. The benefits we offer include private medical insurance, buying or selling annual leave, cycle to work schemes, employee discounts, paid volunteering day, stocks and shares, annual bonus and much more depending on the role. Read more about our benefits here.We are committed to creating a workplace where everyone feels valued for who they are and the unique strengths they bring. Discover more about our programmes, employee networks, wellbeing policies, and inclusive features here.If this role isn’t quite right for you, we encourage you to join our talent community where your details will be shared with our recruitment teams for other potential opportunities. Join the Talent Community here. xrnqpay Join Thales in the UK – Innovate with us and shape the future!SummaryLocation: Reading; Manor Royal Crawley; Ebbw Vale; BristolType: Full time

World Class Defence Organisation is currently looking to recruit 3x FPGA Design Engineer Subcontractors on an initial 12 month contract. Rate: £90.00 per hour Overtime Rate: Hours worked over the standard 37 hours per week, will be paid at 'time and a quarter' Location: Stevenage or Bristol depending on your preference Hybrid / Remote working: 3 days min on site, other 2 remote. However, at times, there could be requirement for fully on site (depending on workload) Duration: 12 Months with very likely extension. Contracts are often ongoing and long-term thereafter. IR35 status: Inside IR35 (Umbrella) Interview process: One stage video interview For this role, we are seeking an experienced FPGA design and verification engineer (~4+ years), to support the development of our growing portfolio of complex FPGA projects. The current portfolio ranges from advanced signal processing systems (ImageRadio), core embedded processing systems, through to safety & security critical systems. • Generating complex FPGA architectures and design implementations (VHDL, Simulink etc), targeting Xilinx, Intel, Microsemi devices., • Verifying complex FPGA implementations using VHDL and System VerilogUVM test-bench methodologies., • Using FPGA design toolsets and Mentor verification tools (QuestaSim & ModelSim)., • Generating low-level software (C) to facilitate FPGA test and integration with the wider embedded system., • Configuring and Documenting designs to a high professional standard., • Working as part of a multidiscipline team to deliver complex FPGA based projects., • Ideally we are looking for candidates that are degree qualified (or equivalent) with significant experience in FPGA development., • Competent VHDL Language and Design Skills., • Competent Verification Skills using VHDL and SystemVerilog methodologies, • A deep proven level of experience designing for Xilinx, Intel or Microsemi FPGAs, • Experience of professionally configuring and documenting designs, • Experience of working as part of a large multidiscipline team #J-18808-Ljbffr

Direct message the job poster from SR2 | Socially Responsible Recruitment | Certified B Corporation I’m recruiting for an experienced QA Test Automation Engineer to join a fantastic, purpose driven company based in North Bristol The team works on a hybrid model, 3 days a week in the Bristol office and 2 days remote, so you'll need to be happy going into theoffice. Their tech team work on software that powers their business that genuinely improve the lives of millions of people , this is definitely work with impact adn they are made up of the nicest team of people. They have an established QA function with a number of SDETS and Test Automation Engineers spread across different teams. They are currently expanding their QA and Test function and are looking for another experienced or Senior Test Automation Engineer who can embed within several agile delivery teams to support automation and promote shift-left testing practices as some of their teams are more early in their automaiton journeys and a number of the team have recently been upskilling. You'll also be part of a wider testing community that offers plenty of support, collaboration, and knowledge-sharing. In this role, you'll work with modern automation tools such as Cypress or Playwright, and may also be involved in backend testing using tools like SOAPUI. A key part of the role is helping to ensure product observability and reliability, using monitoring tools such as Dynatrace, Splunk, and OpsGenie. You’ll act as the quality champion within your team, owning all aspects of testing from automation and will have the opportunity to also be involved in things like performance testing and accessibility testing. They are looking for an experienced test automation engineer with experience building frameworks with tools like Playwright/ Cypress who enjoys keeping up with the latest technologies and trends in the test automation space. This role offers a salary range of £50,000 to £70,000, depending on experience, along with a fantastic benefits package. If you're passionate about automation and want to join a company with a strong mission and supportive culture, i'd love to hear from you. Please apply below or get in touch with Sam Miller at SR2 – Socially Responsible Recruitment. • Not Applicable, • Full-time, • Information Technology, • IT Services and IT Consulting Referrals increase your chances of interviewing at SR2 | Socially Responsible Recruitment | Certified B Corporation by 2x Get notified about new Senior Quality Assurance Automation Engineer jobs in Bristol, England, United Kingdom. Bristol, England, United Kingdom 5 days ago Bristol, England, United Kingdom 3 weeks ago We’re unlocking community knowledge in a new way. Experts add insights directly into each article, started with the help of AI. #J-18808-Ljbffr

Job Title : Senior Electronic Design Engineer Location : Bristol (Hybrid Working - 3 Days On-Site Per Week) Salary : £65,000 - £75,000 + Bonus & Benefits (Depending on Experience) Please Note : All Applicants must have the right to work in the UK without the need for VISA sponsorship now or in the future. Role Overview : Zenovo are looking for a Senior Electronic Design Engineer to join their client in Bristol, contributing to the development of new electronic systems while maintaining, improving, and extending the life of existing designs. This is an excellent opportunity for an experienced electronics engineer who enjoys working hands-on with hardware, investigating complex technical issues, and developing reliable solutions for demanding applications. The role offers a varied mix of new product development, design improvements, testing, and practical problem-solving, with the opportunity to contribute throughout the engineering lifecycle. Job Responsibilities : Design, develop, and improve electronic systems for new and existing products. Produce electronic schematics, PCB layouts, prototypes, and engineering test fixtures. Support prototype builds, hardware testing, validation, and verification activities. Investigate electronic faults at board and system level, identifying root causes and implementing effective solutions. Maintain and enhance existing designs to improve performance, reliability, and long-term serviceability. Carry out component reviews and support obsolescence management, including the selection and validation of replacement components. Contribute to design reviews, technical investigations, and continuous improvement initiatives. Work collaboratively with engineering, manufacturing, operations, suppliers, and management teams. Keep up to date with emerging technologies, components, and engineering practices to identify opportunities for improvement. Required Skills & Experience : 5+ years' commercial experience in electronics engineering, electronic design, or electronic product development. Strong practical experience in analogue circuit design, hardware troubleshooting, fault-finding, and root-cause analysis. Experience taking electronic designs from concept and prototyping through testing, validation, and production. Confident using electronic laboratory equipment for debugging, measurement, development, and design verification. Good understanding of embedded systems and the relationship between electronic hardware and software; embedded C experience would be advantageous. Strong analytical skills and a methodical approach to solving complex technical problems. Comfortable working across hardware and software boundaries, understanding system interactions and their impact on overall performance. Experience with PCB-based electronic products and an understanding of design for manufacture, reliability, and production requirements. A proactive, hands-on approach with the ability to work independently and collaboratively. Benefits Include : Annual Bonus (At least 5%) 25 Days Annual Leave + Bank Holidays Hybrid Working (Outside of an onboarding period) Enhanced Employer Pension Contributions Access to External Training & Development Courses/Qualifications TPBN1_UKTJ

World Class Defence Organisation based in Stevenage and Bristol is currently looking to recruit a Systems Performance Modelling Engineer subcontractor on an initial 12 month contract. Your base site can be either Stevenage or Bristol, depending on your preference. The role can be worked on a 4 day week basis (Monday to Thursday) but due to the nature of the work, the position will need to be based onsite. This role would be suitable for a Simulation and Modelling Engineer (Matlab / Simulink) ideally from the defence or aerospace industry. Rate:£85.00 per hour Location: Your base site can be either Stevenage or Bristol, depending on your preference Hybrid / Remote working: The role will based onsite. A compressed 4-Day week of Monday to Thursday is possible Contract:37 Hours per week Overtime: Hours worked over 37 hours per week will be calculated at 'time and a quarter' Duration: 12 Months (initially and then ongoing and long-term thereafter) IR35 status: Inside IR35 (Umbrella) We are looking for a modeller to produce models of the seeker RF Radar. The model includes the seeker hardware, digital processing and target environment. The modelling team is responsible for developing the model, producing auto-code, generating seeker performance predictions and interfacing the seeker model into the missile dynamic reference model. • Modelling in Matlab and Simulink using model-based design techniques, • Producing parts of a complex Seeker model including modelling the target scenario, seeker hardware and processor algorithms, • Develop and implement algorithms within the model, • Producing and verifying auto-code for the software algorithms from the model, • Carrying out seeker performance assessment, • Producing a simpler representation of the model for use in the missile model, • Upgrading legacy Seeker models to newer MATLAB/Simulink Vectors, • Documenting the model changes and creating test vectors, • Due to the sensitive nature of the work it is predominantly done onsite but there is some flexibility depending on project., • Simulink, • Matlab, • Modelling for auto-coding, • Assessing suitability of algorithms in the model, • Aptitude for converting an algorithm into a Simulink model (desirable), • Familiarity with Radar and Control Systems (desirable), • Familiarity with Digital Signal Processing (desirable), • RF experience (desirable), • Experience in C (not essential), • Technical report writing, • Model delivery experience #J-18808-Ljbffr

Electronics Technician Location: Arundel, West Sussex Salary: Up to £42,000 DOE Our client is growing their Electronics R&D team and are looking for a hands-on Electronics Technician to join their Test and Design group. You'll work alongside engineers on the development and continuous testing of new products. You'll build test setups, get your hands dirty on the bench, and help shape designs with practical ideas and modifications. This is a great opportunity for someone who loves making things work and wants to grow. Over time you could become a product technical expert or electronic design engineer, travelling to customer sites around the world to troubleshoot problems and help tailor designs to specific applications. What you'll be doing • Assembling equipment and prototypes for test, • Carrying out continuous, hands-on testing of power electronics products, • Using hand tools and a soldering iron to build, repair and modify hardware, • Suggesting and making design improvements based on test results, • Using a wide range of test instruments with confidence, • Working closely with hardware, firmware and software colleagues across the R&D team About you • Your route in is flexible. You might be a graduate with some industry experience, or even impressive home projects. Or you might be a technician who came up through an apprenticeship, HNC or HND and built strong theory along the way., • Practical and hands-on. You enjoy bench work and aren't afraid to pick up a soldering iron., • Electronics Enthusiast. You will work on personal projects and see electronics as a hobby., • A background in power electronics. Experience with AC motor drives is a real plus, but they are happy to train the right person., • Some understanding of firmware and software. You don't need to be an expert, just able to talk confidently with all parts of the R&D team., • A great team player with determination and a sense of urgency., • An innovator and lateral thinker who enjoys solving problems in new ways., • Ambitious to grow, and open to travelling to customer sites worldwide as your role develops. Working arrangements This role is based full-time, five days a week, at their headquarters in Arundel. They will welcome a relocator and are able to assist with relocation, Apply today with an up to date CV for immediate consideration. JBRP1_UKTJ

Additional Benefits to be seen below.Bristol, EnglandPermanentWorking: The role offers flexible working but does require engineers on site for 4/5 days per week and is a on secure site where SC clearance is needed. As a Validation and Verification Engineer you'll support product development for the system. Day to day you'll be supporting and producing the definition of the Test Scenarios and success criteria to ensure the product meet its requirements. The role will also involve production of the appropriate verification plans to agree with the equipment DA the method of verification used. Skills, Qualification and ExperienceDegree or equivalent qualification in Systems engineering or similar Systems design/ systems engineering experience in software-based equipment Hands-on experience of SysML, Rhapsody and DOORS tools would be desirable, but training will be provided where needed. Experience in the Defence / Aerospace or safety regulated environment would be advantageous Company Benefits;Bonus: Up to 2,500 (based on performance). Pension: Up to 14% total contribution. Parental Leave: Enhanced parental, maternity, and shared parental leave. Flexi Leave: Up to 15 additional days. Facilities: On-site perks like subsidised meals and free parking. Training and Development: Excellent opportunities for career progression and skill development Even If you feel like you don't meet every qualification, we encourage you to reach out an apply. Company Details;The company are a multi-national group, being No 1 in Europe for what they do! With a number of awards and recognitions, with great career progression and opportunities across the business!It's no wonder, they have been among the winners of the annual Glassdoor Employees' Choice Awards, 2022, and most recently receiving three accreditation gold standard awards with Investors in People! "Interesting work. Good work-life balance. Employees made to feel valued." Software Engineer, 5 Dec 2022. Glassdoor review. "Promotes and believes in a good work/life balance interesting work on most programmes Encourages internal mobility. Offers good development/training opportunities" Principal Systems Engineer, 19 Dec 2022. Glassdoor review. True advocates of ED&I as an Equal Opportunity Employer! With over 10 Networking groups and communities across the business advocating Equity, Diversity and Inclusion.Enhanced parental leave: Offers up to 26 weeks for maternity, adoption and shared parental leave. Enhancements are available for paternity leave, neonatal leave and fertility testing and treatments.For full information, please get in touch