Trabajos software test engineer en BedfordCrear alertas

Requisition ID: 1505ERP Eligible?: YesERP amount: 1,800Type: ExemptShift: 1Clearance Prior to Start: SCFinal Clearance: DVExperience Level: Experienced ProfessionalFT/PT/Casual: FullTimeDepartment: MFC-LMUK AmpthillBusiness Unit: MFC-LMUK AmpthillAbout the roleReporting to the Design Team Lead, the Senior Electrical Engineer is expected to take responsibility for elements of the design, development of electrical / electronic subsystem solutions from concept to sell off. This could be bespoke design or a collection of COT’s items to achieve a robust design solution.You will facilitate the development of functional and physical design requirements to ensure complete integrated design architecture following a detailed phase-gate development process.You will have the ability to produce technical documentation to support all activities, from trade studies, requirements documentation, compliance evidence and test documentation.You will design and develop electrical / electronic sub-assemblies for low and high power DC systems.You will analyse, test and evaluate electrical circuits, components and protection of harnesses.You will be a strong team player with good written and verbal communication skills, with the ability to support other areas of the Business which could include planning, procuring, material controls, change control.Good self-management, driven to get the results needed, robust organisational skills and flexibility in tasks undertaken.Required skills, qualifications and experienceFormal Electrical qualification such as HNC/HND/BEng.Experience of Electrical Hardware Design & Electrical Product Development for Harsh Environments.Electrical analysis of derating, stress and tolerance.Experience of software tools (e.g. Zuken, Harnware).EMC Awareness at product and circuit level.Awareness of Def-Stan/Mil Standards, Safety and Quality processes.Ability to support and manage aspects of Assembly, Integration and Test.Experience of working with lab test equipment,e.g. debug of Electrical circuits.Experience of Windchill or other Product Lifecycle Management tool.The role MUST be satisfied by someone DV cleared (or who can obtain DV) and work full time on site. This is a critical role to maintain the dales within the SP Business Area.

Requisition ID: 2532ERP Eligible?: YesERP amount: 1,800Type: ExemptShift: 1Clearance Prior to Start: DVFinal Clearance: DVExperience Level: Experienced ProfessionalFT/PT/Casual: FullTimeDepartment: MFC-LMUK AmpthillBusiness Unit: MFC-LMUK AmpthillStandard Job DescriptionPerforms technical planning, system integration, verification and validation, cost and risk, and supportability and effectiveness analyses for total systems. Analyses are performed at all levels of total system product to include: concept, design, fabrication, test, installation, operation, maintenance and disposal. Ensures the logical and systematic conversion of customer or product requirements into total systems solutions that acknowledge technical, schedule, and cost constraints. Performs functional analysis, timeline analysis, detail trade studies, requirements allocation and interface definition studies to translate customer requirements into hardware and software specifications. For positions that perform IT responsibilities, use E646, Systems Engr-IT.About the roleWe are urgently seeking to recruit a Senior Control Systems Engineer, to be based predominantly on-site at our Ampthill, Bedfordshire offices, in a permanent capacity. This role will favour a strong foundation in control theory and system dynamics. You will be capable of developing and implementing control strategies, modelling system behaviour and managing coordinate systems and reference frames where required. The engineer is expected to assess system stability, robustness and performance, applying analytical and simulation-based approaches.Integrating into numerous wider multi-disciplinary engineering teams in this business area, the applicant will be performing key analyses to support the shared endeavours of each team. The successful applicant will have a rewarding engineering career in a highly stimulating defence world.The Systems Engineer will be responsible to the Programme Chief Engineers. Specific role scope will be subject to assigned programme but will include a range of modelling and systems engineering activities such as:- General external flow aerodynamics modelling.- Trajectory modelling.- Aerothermodynamics modelling.- Thermal response modelling.- Model optimisation / calibration.- Ground Trials Analysis.Candidates must be able to work in the UK without restrictions in accordance with UK National Law and be prepared to successfully undertake an appropriate level of UK National Security Vetting according to UK Government National Security Vetting criteria: DV Clearance will be required for the role - applicants should either already hold a DV or being prepared to go through an application immediately.Required skills, qualifications and experienceA strong foundation in control theory and system dynamics: Capable of developing and implementing control strategies, modelling system behaviour and managing coordinate systems and reference frames where required. The engineer is expected to assess system stability, robustness and performance, applying analytical and simulation-based approaches.Must be able to work under general direction and participates in determining assignment objectives. Educated to degree level either through education or career experiential learning with exposure to Aerospace/Control engineering.Good computer skills including Windows and Linux operating systems.Clear and concise report writing skills.Good presentation skills.Good team working skills are essential since the role involves working in teams that will be multi-disciplinary.Self-drive will be required in order to deliver programme activities and milestones, and the role will on occasions be customer facing.Strong communication skills required to liaise with Senior Stakeholders both within the company and customers.Experience in working in a classified setting preferred.A key requirement of this role is the ability to obtain and maintain a high‑level security clearance. If you do not currently hold the required clearance, we can support you through the application process.Must be able to work in the UK without restrictions in accordance with UK National Law and be prepared to successfully undertake an appropriate level of UK National Security Vetting according to UK Government National Security Vetting criteria: DV Clearance will be required for the role - applicants should either already hold a DV or being prepared to go through an application immediately.

Requisition ID: 12319ERP Eligible?: YesERP amount: 1,800Type: ExemptShift: 1Clearance Prior to Start: SCFinal Clearance: DVExperience Level: Experienced ProfessionalFT/PT/Casual: FullTimeDepartment: MFC-LMUK AmpthillBusiness Unit: MFC-LMUK AmpthillAbout the roleWe are looking for a skilled Senior Reliability Engineer to join our engineering department. You will lead and support reliability, availability, and maintainability (RAM) activities across complex hardware, software, or electronic defence systems. Your work will directly impact product safety, operational readiness, and mission success.Key Responsibilities• Conduct reliability predictions, calculations, and analysis across all product lifecycle phases.• Perform Failure Modes, Effects, and Criticality Analysis (FMECA) to identify and mitigate design risks.• Develop and manage Reliability and Maintainability (R&M) Programme Plans and Safety Cases.• Analyze test results and field failure data to drive continuous design improvements.• Collaborate with systems, software, and hardware engineering teams to ensure compliance with defence standards and regulations.• Participate in internal and external project reliability reviews and panels.A key requirement of this role is the ability to obtain and maintain a high‑level security clearance. If you do not currently hold the required clearance, we can support you through the application process. DV Clearance will be required for the role - applicants should either already hold a DV or being prepared to go through an application immediately.This position will require an on-site presence in Ampthill, Bedfordshire.Required skills, qualifications and experienceStrong experience of reliability engineering experience in a manufacturing or defense environment. Proven track record in managing reliability studies and producing actionable recommendations.Must be able to work in the UK without restrictions in accordance with UK National Law and be prepared to successfully undertake an appropriate level of UK National Security Vetting according to UK Government National Security Vetting criteria: DV Clearance will be required for the role - applicants should either already hold a DV or being prepared to go through an application immediately.Degree in Electrical Engineering, Mechanical Engineering, Systems Engineering, or a related STEM field (or equivalent practical experience). Proven experience in reliability engineering, safety analysis, or systems assurance within aerospace, defence, or a highly regulated safety-critical industry.Strong working knowledge of FMECA, reliability prediction standards, and fault tree analysis.Excellent verbal and written communication – able to produce clear, concise reports and present findings to technical & non‑technical audiences.

Senior Electronics Hardware Design Engineer Office-Based Bedford Are you an experienced electronics hardware design engineer, looking for your next role? Our expanding client designs and manufacture premium residential and workplace EV charging products. They are looking for an experienced Senior Electronics Hardware Engineer to join their Product and Technology team to support the design, development, validation and continuous improvement of the electronics used within their charging products. The Role: You will be responsible for the hardware design and development of PCBs and associated electronic systems. This is a hands-on hardware engineering role covering the full development lifecycle, including circuit design, schematic capture, PCB development, component selection, prototype bring-up, testing, validation, EMC, compliance and production support. You will work closely with firmware, software, mechanical, production and quality teams to develop robust, reliable and manufacturable EV charging hardware. More Detail: Design and develop electronic circuits for EV charging products. Create and maintain schematics, PCB designs and associated engineering documentation. Support PCB layout and design reviews. Select and evaluate components considering performance, reliability, cost and availability. Carry out prototype PCB bring-up, debugging and fault finding. Develop and execute hardware test and validation plans. Perform analogue and digital circuit testing using appropriate laboratory equipment. Design for EMC and support pre-compliance and formal EMC testing. Support electrical safety, regulatory and product certification activities. Investigate hardware failures and carry out structured root-cause analysis. Support Engineering Changes and continuous product improvement. Work closely with firmware and software engineers during integration and debugging. Support internal and external manufacturing with PCB and electronics-related issues. Improve production test methods, fixtures and diagnostic capability. Support component obsolescence, alternative component qualification and supply-chain issues. Ensure design, test and validation documentation is clear, controlled and maintained. Experience Required: Degree or equivalent experience in Electronics, Electrical Engineering or a related discipline. Strong industry experience in electronic hardware design and development. Proven analogue and digital circuit design experience. Strong schematic capture and PCB design/review capability. Experience with Altium Designer at expert level. Experience of PCB bring-up, debugging and fault finding. Practical experience using oscilloscopes, multimeters, power supplies, electronic loads and other laboratory equipment. Good understanding of EMC design principles and practical EMC troubleshooting. Experience of hardware verification and validation. Experience with relevant electrical safety, EMC and product compliance standards. Experience with microcontroller-based products, including STMicroelectronics, Espressif or Atmel/Microchip devices. Experience of RF communications, antenna integration and RF/EMC troubleshooting. Ability to investigate complex hardware issues using a structured engineering approach. Good understanding of component selection and design for manufacture. Experience developing mains-powered electronic products. Nice to have experience: Experience of EV charger / EVSE hardware design and development. Knowledge of EV charging industry standards and regulatory requirements. Experience supporting electronics manufacturing and production test. Knowledge of design-for-manufacture and design-for-test principles. Experience working with contract electronics manufacturers and PCB assembly suppliers. This long term permanent role is offering a basic salary of £60,000 - £65,000 plus benefits. If you have the proven electronics hardware engineering experience our client is looking for then APPLY NOW, in complete confidence. Advancing People - The Recruitment Specialist Advancing People Ltd is an Equal Opportunities Employer and acts as both an Employment Business and Employment Agency. TPBN1_UKTJ

We're looking for an Electrical / ICA Engineer to join our Thames Water Major Projects team based in East Hyde, Luton. Location: East Hyde, Luton Hours: Full time - some flexibility on hours available if desired, just let us know when you speak to us. We're seeking an Electrical/ICA Engineer to work within our Thames Water Major Projects team. You'll provide LV Electrical, Control & Automation, and PLC & SCADA commissioning expertise for industrial projects, with a particular emphasis on the water industry. This is a fantastic opportunity for someone who is quality-focused and has a demonstrable history of commissioning Electrical ICA works in major projects. Kier is a strategic partner to Thames Water, providing design and build services for new and existing infrastructure assets. What will you be responsible for? As an Electrical / ICA Engineer, you'll be working within the Thames Water Major Projects team, supporting them in delivering commissioning expertise for industrial projects. Your day to day will include: • Reviewing LV Electrical and ICA documentation, including MCC/RTU electrical schematics, control philosophies, and functional design specifications, ensuring compliance with water industry asset standards, • Representing Kier at client meetings and coordination sessions, providing liaison and technical support, • Conducting fault finding and system configuration for MCC and ICA equipment including PLCs and control panels, • Overseeing installation and commissioning of Profibus DP/PA communication networks and supporting System Integrators with PLC software development, • Reviewing Electrical Risk Assessments and Method Statements, and authorising Inspection and Test Plans to ensure compliance with project and legislative requirements What are we looking for? This role of Electrical / ICA Engineer is great for you if: • You're HNC qualified in Electrical/Electronic or Instrumentation Engineering, or a similar discipline, • You have experience in ICA engineering, PLCs, HMIs, Profibus networks and SCADA installations on large-scale water treatment works, • You have a good knowledge of Low Voltage large motor control centres and communications protocols including Profibus, Modbus, and Ethernet IP, • You possess strong interpersonal skills and can work effectively as part of a multi-discipline team, demonstrating versatility and resourcefulness, • You hold a Full driving licence We're all about finding potential here at Kier, and transferrable skills are always welcome! So, even if you don't tick every box, please apply and we can have a chat. Rewards and benefits We're proud to be able to offer our brilliant people a wide variety of benefits that you can tailor to your needs. You can see more information of benefits here. Diversity and inclusion Making Kier a diverse and inclusive place to work is a huge priority for us. We're proud of the steps we've taken so far, but we know we must always do more. Our employees are key in shaping Kier's diversity and inclusion initiatives and our people have made a huge impact on how we work, by using their experiences to shape our policies. You can see our D&I action plan here. As a Disability Confident employer, we will ensure that a fair and proportionate number of disabled applicants that meet the minimum criteria for this role will be offered an interview. We look forward to seeing your application to #joinkier #LI-CH1 JBRP1_UKTJ

Fantastic challenges. Amazing opportunities. GKN Aerospace is reimagining air travel: going further, faster and greener! Fuelled by great people whose expertise and creativity sets the standards in our industry, we're inspired by the opportunities to innovate and break boundaries. We're proud to play a part in protecting the world's democracies. And we're committed to putting sustainability at the centre of everything we do, opening up and protecting our planet. With over 16,000 employees across 33 manufacturing sites in 12 countries we serve over 90% of the world's aircraft and engine manufacturers and achieved sales of £3.35 bn.in 2023. There are no limits to where you can take your career. Job Summary It's great to know you're making a difference to the future of aviation! Whatever part you play you'll be helping us deliver operational excellence to our customers. Based at our Luton manufacturing plant you'll do just that. Established in 1993, GKN Aerospace in Luton is a world leader in commercial and military ice protection systems and transparencies. Offering a full range of capabilities; design, analysis, testing, certification and manufacture of electro-thermal ice protection, military fast jet canopies and flight deck windows to over 20 programmes including: Boeing 787, Dreamliner, Airbus A320, AgustaWestland, AW101, Eurofighter Typhoon and Lockheed, Martin F-22 Raptor. Our customers include Boeing, Airbus, Lockheed Martin, Bell Helicopters, Textron, BAE Systems, Pratt & Whitney, Leonardo. Our Luton site is home to 370+ employees and onsite facilities including onsite parking, food hub and vending machines. As a Senior Systems Engineer (Electronics) you will draw on your diverse engineering background and the product lifecycle awareness to work on a variety of research activities in the TRL1-6 range. You must have sound experience in leading technical work, including budgeting, schedule and risk management. You will be capable of achieving through others internally and externally, and you will be committed to development of your own skills and professional network. Your proactive nature will enable you to understand and adapt to new technology areas quickly. The Luton team is focussed on developing product and manufacturing process technology related to aircraft ice protection systems and specialist structures for both civil and defence applications. The areas of activity cover but is not limited to: Electro-thermal systems and Electro-mechanical systems, Specialist materials and coating systems, Embedded and structural composites, Aircraft transparencies, Icing modelling and analysis, Sensing and data acquisition, Electrical and software control systems and digital engineering / manufacturing. This role is to provide analysis and design data to support ice protection system design through modelling and simulation of in-flight icing behaviour of aircraft surfaces, or representative surfaces. It is further expected that the role holder develop an in-depth understanding of the icing wind tunnel facility capabilities, and provide consultation and support to customers and other third party users ensuring testing is conducted in line with relevant standards and specifications and contributing to test reports as required. This expertise is to be developed through understanding icing physics and aircraft ice protection philosophies (particularly electrothermal), and through practical experimentation and modelling verification using the research icing wind tunnel. The successful candidate should have a broad engineering knowledge base but have a desire to specialise and in time develop the in depth knowledge to become a subject matter expert in icing analysis and testing, being able to support next generation ice protection system designs. We are seeking someone adaptable in their approach to work, and be willing to understudy other team members in their areas of expertise to ensure project objectives are met. As a Senior Systems Engineer (Electronics), you will be naturally curious and seek to increase/deepen your own technical knowledge through study, collaborative working, hypothesis testing and experimentation. Core operational hours at our Luton site are: 07:30 - 16:30 Monday to Thursday & 07:30 - 12:30 Friday. The role requires flexibility for occassional national travel to meet with customer and we offer the opportunity to work from home up to two days per week dependent on business need. Job Responsibilities • Responsible for the technical delivery of allocated project deliverables, or project work packages, ensuring the research objectives have been satisfied., • You may have budget accountability for a Work Stream or Work Package, • Support or lead any necessary 'hands on' development test work and development trials that are required to meet your Work Package/Work Stream delivery objectives., • Support or lead the design of external work packages to be carried out by third parties in order to meet project research objectives., • Responsible for accurately capturing and recording data and results from test work and development trials., • Responsible for raising and issuing high quality and detailed technical documentation., • Seek to understand the strategic direction of the target products or manufacturing process technologies being developed within your project(s), • Responsible for preparation of Technology Development Plans and Technology Business Cases within your project(s), • Ensure all planning documentation in your responsibility is regularly updated, accurate, and delivery is on track. You may also have schedule accountability for your project(s), • Suggest and explore exploitation routes, aligned with the guidance of the Work Stream Lead., • Drive project(s) toward exploitation, identifying and supporting industrialisation scenario development., • Support project stakeholder management with internal/external customers, and you may lead management of supply chain partners in some cases., • Take an active role in creating a personal development plan linked to GKN's TEF and will be responsible for delivering on agreed objectives supported by your line manager, • Ensure EHS policy and process adherence for your activities, and you will contribute to a proactive EHS culture in the wider team., • Contribute to the development of GKN as a 'Great Place to Work', aligned with the core principles - safe, innovative, open & honest, care & respect, and ownership. What You'll Bring To help us make a difference, you'll bring your passion and talent for what you do along with the following skills, experience, qualifications and attributes: Essential: • HNC, degree or equivalent experience in electrical or systems engineering, • Experience delivering designs for electro-mechanical, sensing OR controller systems within an engineering environment, • Electronics pcb design experience, • Good general engineering/technology knowledge base and can demonstrate strategic thinking., • Working knowledge of aerodynamics and an appreciation of physics based modelling approaches for thermodynamic analysis., • Experience of test/experimental design, and practical execution in laboratory or test facility conditions to defined standards, and be able to contribute to the development of new test methods., • Strong self-starter, able to execute tasks according to plan., • Logical and methodical approach to task planning., • Experience managing deployed resources (people you lead but you are not their line manager)., • Good interpersonal and communication skills, and can confidently translate complex information to a variety of audiences and you are able to represent your project(s) and GKN values in internal/external review meetings. Desirable: • A higher degree qualification such as a Masters, PhD or EngD, • General awareness of budget and schedule management., • An awareness of aerospace certification requirements., • Experience of the Systems Development Lifecycle process, • You will be developing your own network and you will have a general awareness of key companies and key individuals who operate in the wider aerospace technology and engineering field We are looking for people who want to make a difference, talented members with the skills and passions to become the best of the future in what they do. Note: Some GKN programmes are subject to regulatory restrictions which may impact certain nationalities. As part of the application process you will be asked to declare when applying for this role. The position requires UK National Security Vetting (UKNSV) Security clearance (SC) due to the nature and responsibilities of the work carried out. In order for us to obtain an SC you usually need to have been resident in the UK for a minimum of 5 years to current date (but we do assess each case individually). What We'll Offer Once you're on board you'll get the following perks and benefits: • Competitive salary dependent on experience, • The opportunity to earn up to 15% bonus, • Industry Leading Pension Scheme = we'll match your contributions up to 8% on a 1 : 1.5 basis, • Life Assurance 8 x salary, • 185 hours holiday + bank holidays, • Income protection, • Shopping discounts, • Cycle To Work Scheme, • Employee Assistance Programme, • Virtual GP Clinic for you and immediate family, • Electric Vehicle (EV) salary sacrifice scheme (Insurance, servicing, maintenance, roadside assistance and more included), • Free onsite parking, • Local gym discount, • Free airport parking, • Enhanced family friendly leave, • A collaborative, dynamic working environment As well as a competitive package we'll offer you a world of opportunity. We want to see your career fly! We'll support your career progression by providing you with learning and development opportunities. That's the beauty of being part of a global business, once you're on board you never know where you career journey may take you! Join us and keep the world moving ... click on the link below to apply #LI-ONSITE #LI-CH1 We'll offer you fantastic challenges and amazing opportunities. This is your chance to be part of an organisation that has proven itself to be at the cutting edge of our industry; and is committed to pushing the boundaries even further. And with some of the best training on offer in the industry, who knows how far you can go? A Great Place to work needs a Great Way of Working Everyone is welcome to apply to GKN. We believe that we can only achieve our ambitions through a coming together of diverse minds who enjoy collaborating in an inspirational environment. Through our commitment to diversity, inclusion and belonging and by living our five powerful principles we've created a culture where everyone feels welcome to contribute. It's a culture that won us 'The Best Workplace Culture Award'. By embracing and celebrating what makes us unique we encourage everyone to bring their full self to work. We're also committed to providing an accessible recruitment process, so if you require reasonable adjustments at any stage during our recruitment process please get in touch and let us know. We are the place where human dreams, plus human endeavour, shape the future of aerospace innovation and technology. JBRP1_UKTJ

Lexington Medical, Inc. is hiring an Electrical Engineer in Bedford, MA to design and develop embedded electrical systems for our AEON™ surgical stapling platform. As an Electrical Engineer at Lexington Medical, you will work hands‑on across the hardware development lifecycle, from circuit design and PCB development through prototyping, testing, debugging, verification, and production. Lexington Medical, Inc. is a medical device company designing and manufacturing surgical stapling technology at our headquarters in Bedford, Massachusetts, just outside Boston. Our AEON™Endostapleris an FDA‑cleared, minimally invasive surgical stapler used in operating rooms around the world. With engineering, manufacturing, and quality working closely together, engineers stay close to the product and see their work move from an idea through prototyping, testing, manufacturing, and ultimately intothe operating room. As an Electrical Engineer at Lexington Medical, you will join an R&D team developing embedded electrical systems for our powered surgical stapling devices. You will contribute to schematic capture, PCB design, componentselection, hardware bring‑up, debugging, testing, and system‑level integration while working closely with firmware, mechanical, and manufacturing engineers. The systems you will work onoperateunder real‑world constraints including power, size, reliability, manufacturability, and regulatory requirements. You will have the opportunity to work across the full development process and see how your electrical designs perform as part of a complete electromechanical medical device. This is a good fit for an electrical engineer who wants hands‑on hardware experience, broad technical exposure, and the opportunity to develop products where disciplined engineering and attention to detail directlyimpactperformance and patient care. • Design, develop, and support embedded electrical subsystems for electromechanical surgical devices., • Assist in schematic capture, PCB design (rigid, flex, rigid‑flex), and component selection., • Support mixed‑signal, microcontroller‑based designs, including power management, sensing, and actuation circuits., • Participate in hardware bring‑up, debugging, bench testing, and system‑level integration., • Collaborate with firmware and mechanical engineers to ensure robust hardware‑software integration., • Contribute to electrical verification and validation activities, including test execution and documentation., • Support design control documentation, including DHF elements, traceability, and risk documentation., • Assist with troubleshooting fielded products and implementing well‑documented design updates., • Learn and apply best practices for design quality, documentation, and change control in a regulated environment., • B.S. in Electrical Engineering or related field., • 1+ years of relevant experience, including internships or co‑ops in embedded systems hardware design, preferably in a regulated industry., • Strong fundamentals in circuit analysis, electronics, and microcontroller‑based systems., • Experience or coursework in schematic capture and PCB design., • Familiarity with mixed‑signal circuits, power management, and basic embedded hardware concepts, • Exposure to structured design documentation and testing practices; regulated industry experience is a plus., • Ability to work collaboratively across disciplines and learn quickly in a fast‑paced engineering environment., • Strong attention to detail. This position is based at our headquarters in Bedford, Massachusetts, in the Greater Boston area, and is an on‑site role. $80,000 to $10,000 USD Visitour Candidate Journey page to learn what to expect from our hiring process. $80,000—$110,000 USD #J-18808-Ljbffr

Introduction: Saab UK is part of Scandinavia's largest defence company, bringing together the best of Swedish and British innovation. Saab offers world-leading solutions and services in defence, aviation, space, and civil security to keep people and society safe. Our UK presence has been growing at pace, meaning we can offer a wide range of opportunities for personal fulfilment and career growth. We currently employ over 600 people across eight sites in the UK, and our specialisations include software engineering, underwater robotics, radars, AI, and armed forces training. The Role: This role is part of our Blue Bear business unit in Bedford. We are seeking a UAV Design Engineer with aircraft sizing ownership, hands-on engineering, and data-validation experience to strengthen our early-stage design capability: turning requirements and CONOPS into sized, analysed and testable air vehicle concepts through rapid, iterative trade studies. This role is central to our conceptual design loop, by early exploring design trade space and rapidly iterating through geometry, aerodynamics, weights, propulsion, mission and stability. Key Responsibilities: Perform aircraft conceptual sizing and constraint analysis to define feasible design points for new UAV concepts. Develop parametric air vehicle geometry and Outer Mould Line and drive it through the analysis loop, regenerating a concept from a defined parameter set. Produce the core conceptual outputs. Run trade studies and design-space exploration. Synthesise flight-test and bench-test data (flight logs, telemetry, measured aero/propulsion performance) and use it to validate, calibrate and improve conceptual models and sizing methods. Select and shape propulsion system concepts and integrate them into mission and energy-network performance analysis. Maintain, improve and where appropriate build the concept-design toolchain and automation that underpins rapid iteration (geometry, aero, mission, surrogate and data-processing tools). Capture and communicate design risk, where the design is immature or sensitive and feed it into the programme risk register. Qualifications and skills: Aircraft sizing, concept-design tooling, and the synthesis of flight-test data to improve models Aircraft / UAV conceptual design and sizing, constraint analysis, weight and mission/energy sizing, and closing a design point. Hands-on experience with conceptual and preliminary design tools such as OpenVSP, RCAIDE, AVL, XFLR5, Datcom or equivalent in-house tools. Sound applied aerodynamics knowledge. Experience synthesising flight logs / telemetry / test data and using it to validate and improve analytical models (model calibration, correlation to test). Strong scripting and analysis skills in Python (or similar). Working understanding of the full conceptual design loop: geometry, aerodynamics, weights, propulsion, mission performance and stability & control, and how the disciplines couple. Strong problem-solving skills, sound engineering judgement, and a proactive approach to improving methods and tools. Ability to work collaboratively across a small, multidisciplinary engineering team. Stability & control analysis, flight dynamics modelling, and handling-qualities assessment. Experience with PX4 / ArduPilot, SITL/HITL simulation, and processing autopilot flight logs (ULog, MAVLink). CAD and geometry handling; exporting/meshing surfaces for higher-fidelity aero (panel/CFD). Mid- to high-fidelity aero exposure (panel methods such as FlightStream, or RANS CFD) for validating key design points. Experience working in safety-critical, regulated or defence environments. Ability to gain SC Clearance. Saab UK Company Benefits: 30 days annual leave Workplace pension scheme with 8% company contribution Private medical insurance Group income protection scheme Death in service insurance Up to 5% share matching scheme Company enhanced Maternity/Adoption & Paternity leave. + Much more By submitting an application to Saab UK you consent to undertaking workforce screening activities that may include but are not limited to: Baseline Personnel Security checks, National Security Vetting, reference checks, verification of working rights and in all circumstances preferred candidates will be placed through a security interview. TPBN1_UKTJ

Bedford (5 Days Per Week Onsite) Salary up to £70,000 Permanent We're recruiting an Embedded QA Engineer to join a specialist technology team responsible for testing, validating and improving Smart TV and connected entertainment platforms used by millions of consumers. This is an exciting opportunity for an experienced QA professional with a background in consumer electronics, Smart TVs, set-top boxes, embedded systems, or connected devices. You'll play a key role in ensuring products deliver a seamless viewing experience while working closely with manufacturers, software vendors, and platform partners. As an Embedded QA Engineer, you'll be responsible for the testing, approval, and ongoing quality assurance of television platforms, applications, and connected devices. You'll investigate complex technical issues, perform root cause analysis, improve testing processes, and help shape quality standards across the team. You'll also work closely with external partners and internal stakeholders to ensure products meet functional, performance, and user experience expectations. • Define and own QA strategies for consumer-facing TV platforms and applications, • Lead testing, validation, and approval of Smart TVs, set-top boxes, and connected device software, • Test and troubleshoot video streaming and on-demand applications, • Perform detailed fault investigation and root cause analysis on complex technical issues, • Work closely with manufacturers, operating system vendors, and content providers, • Develop and improve test procedures, tools, and quality processes, • Support and mentor junior team members, • Provide technical expertise to stakeholders across the business, • Proven experience in Embedded QA, Consumer Electronics Testing, or Device Certification, • Strong understanding of Smart TV technologies, connected devices, or video streaming platforms, • Experience with software and hardware testing methodologies, • Strong analytical and troubleshooting skills with a structured approach to problem solving, • Experience using specialist testing and debugging tools, • Linux, Unix, or macOS environment experience, • Excellent stakeholder management and communication skills, • Strong planning, organisation, and attention to detail, • Testing web-based applications and services, • Experience with Jira, Confluence, TestRail, or similar test management tools, • Knowledge of IP video streaming technologies, • Experience working with global partners and distributed teams You'll be a proactive and detail-oriented QA professional who enjoys solving technical challenges and working collaboratively with engineering and product teams. You'll be comfortable managing multiple priorities, building strong stakeholder relationships, and driving continuous improvement within a fast-paced environment. Salary up to £70,000 Opportunity to work on market-leading connected TV platforms Exposure to cutting-edge television and streaming technologies Career development and technical growth Collaborative and highly skilled engineering environment #J-18808-Ljbffr

United Kingdom of Great Britain and Northern Ireland Saab UK is part of Scandinavia’s largest defence company, bringing together the best of Swedish and British innovation. Saab offers world-leading solutions and services in defence, aviation, space, and civil security to keep people and society safe. Our UK presence has been growing at pace, meaning we can offer a wide range of opportunities for personal fulfilment and career growth. We currently employ over 600 people across eight sites in the UK, and our specialisations include software engineering, underwater robotics, radars, AI, and armed forces training. Saab is a leading defence and security company with an enduring purpose, to help nations keep their people and society safe. Empowered by its 28,000 talented people, Saab constantly pushes the boundaries of technology to create a safer and more sustainable world. Saab designs, manufactures and maintains advanced systems in aeronautics, weapons, command and control, sensors and underwater systems. Saab is headquartered in Sweden. It has major operations all over the world and is part of the domestic defence capability of several nations. This role is part of our Blue Bear business unit in Bedford. We are seeking a UAV Design Engineer with aircraft sizing ownership, hands‑on engineering, and data‑validation experience to strengthen our early-stage design capability: turning requirements and CONOPS into sized, analysed and testable air vehicle concepts through rapid, iterative trade studies. This role is central to our conceptual design loop, by early exploring design trade space and rapidly iterating through geometry, aerodynamics, weights, propulsion, mission and stability. • Perform aircraft conceptual sizing and constraint analysis to define feasible design points for new UAV concepts., • Develop parametric air vehicle geometry and Outer Mould Line and drive it through the analysis loop, regenerating a concept from a defined parameter set., • Produce the core conceptual outputs., • Run trade studies and design-space exploration., • Synthesise flight‑test and bench‑test data (flight logs, telemetry, measured aero/propulsion performance) and use it to validate, calibrate and improve conceptual models and sizing methods., • Select and shape propulsion system concepts and integrate them into mission and energy‑network performance analysis., • Maintain, improve and where appropriate build the concept‑design toolchain and automation that underpins rapid iteration (geometry, aero, mission, surrogate and data‑processing tools)., • Capture and communicate design risk, where the design is immature or sensitive and feed it into the programme risk register., • Aircraft sizing, concept-design tooling, and the synthesis of flight‑test data to improve models, • Aircraft / UAV conceptual design and sizing, constraint analysis, weight and mission/energy sizing, and closing a design point., • Hands‑on experience with conceptual and preliminary design tools such as OpenVSP, RCAIDE, AVL, XFLR5, Datcom or equivalent in‑house tools., • Sound applied aerodynamics knowledge., • Experience synthesising flight logs / telemetry / test data and using it to validate and improve analytical models (model calibration, correlation to test)., • Strong scripting and analysis skills in Python (or similar)., • Working understanding of the full conceptual design loop: geometry, aerodynamics, weights, propulsion, mission performance and stability & control, and how the disciplines couple., • Strong problem‑solving skills, sound engineering judgement, and a proactive approach to improving methods and tools., • Ability to work collaboratively across a small, multidisciplinary engineering team., • Stability & control analysis, flight dynamics modelling, and handling‑qualities assessment., • Experience with PX4 / ArduPilot, SITL/HITL simulation, and processing autopilot flight logs (ULog, MAVLink)., • CAD and geometry handling; exporting/meshing surfaces for higher‑fidelity aero (panel/CFD)., • Mid‑to high‑fidelity aero exposure (panel methods such as FlightStream, or RANS CFD) for validating key design points., • Experience working in safety‑critical, regulated or defence environments., • Ability to gain SC Clearance., • 30 days annual leave, • Workplace pension scheme with 8% company contribution, • Private medical insurance, • Death in service insurance, • Up to 5% share matching scheme, • Company enhanced Maternity/Adoption & Paternity leave., • + Much more By submitting an application to Saab UK you consent to undertaking workforce screening activities that may include but are not limited to: Baseline Personnel Security checks, National Security Vetting, reference checks, verification of working rights and in all circumstances preferred candidates will be placed through a security interview. Regardless of whether you value cutting edge technology, creativity or an innovative environment, everyone at Saab contributes to keeping people and society safe. #J-18808-Ljbffr

Location: Bedford Salary: £35,000 basic + 10% annual performance bonus Job type: Full-time, permanent Working hours: Monday to Friday, core hours (8:00am–4:00pm / 9:00am–5:00pm) The opportunity We're recruiting a Workshop Engineer for a global leader in medical imaging, diagnostics and healthcare technology. Based at the company's Bedford site, you'll take ownership of the UK workshop, preparing, configuring and testing medical imaging equipment before it reaches NHS and private healthcare customers. Working across X-ray, ultrasound and diagnostic systems, this is a hands-on technical role combining PC and network configuration, software testing, image quality checks, fault-finding and practical engineering. You'll work closely with Project Realisation, Field Service, Product Management and Sales teams. With full training provided, there is also a proven progression route into Field Service Engineering, including opportunities to support customer sites once you're fully trained. What you'll be doing Pre-stage, configure and test X-ray, ultrasound and IVD equipment before customer delivery. Configure PCs and connect systems to networks, including third-party integrations. Carry out software testing and image quality checks. Diagnose and resolve network, software and hardware faults. Carry out preventative maintenance, repairs and upgrades on demo and loan equipment. Prepare demonstration equipment for account managers and the sales team, sometimes at short notice. Support product testing and validation during New Product Introduction (NPI). Complete build sheets, QA records and validation documentation in line with ISO 13485 and ISO 9001 requirements. Maintain test equipment calibration and process spare parts returns. Support Field Service Engineers on customer sites once trained. Equipment you'll work with Digital X-ray systems, including fixed and mobile systems Ultrasound systems IVD desktop blood analysers Integrated PCs and workstations Network and third-party integrations Demo and loan equipment What we're looking for We're looking to speak with hands-on engineers who combine strong PC and networking skills with practical engineering ability and are looking to build a long-term career in healthcare technology. At least 2 years' hands-on technical experience, ideally in IT/desktop engineering, AV, systems integration, EBME/medical engineering, electronics or military communications. Strong PC and networking skills, including configuring PCs, connecting systems to networks and diagnosing connectivity issues. Experience diagnosing software errors and hardware faults. HNC, HND or degree in Engineering, IT or Networking, or a relevant networking qualification such as CompTIA Network+ or CCNA. Basic practical engineering skills and confidence using tools and working with hardware. A self-motivated, organised and flexible approach, with the ability to respond to last-minute requests. Full UK driving licence. Must live within approximately one hour's commute of Bedford. Package and benefits Basic salary: £35,000 Annual performance bonus: 10% Private Medical Insurance Life Assurance 26 days' annual leave plus Bank Holidays Pension: 6% employer contribution / 3% employee contribution Monday to Friday, core hours Bedford-based workshop role with no constant travel or overnight stays Full UK and international manufacturer training Hands-on exposure to new products before launch Opportunity to work with leading medical imaging technology Proven progression route into Field Service Engineering A long-term opportunity to develop your technical career within a global healthcare technology manufacturer TPBN1_UKTJ

Saab UK is part of Scandinavia's largest defence company, bringing together the best of Swedish and British innovation. Saab offers world-leading solutions and services in defence, aviation, space, and civil security to keep people and society safe. Our UK presence has been growing at pace, meaning we can offer a wide range of opportunities for personal fulfilment and career growth. We currently employ over 600 people across eight sites in the UK, and our specialisations include software engineering, underwater robotics, radars, AI, and armed forces training. This role is part of Saab Bluebear Business in Bedfordshire. It will be reporting into the Head of Digital Systems Engineering. In this exciting, dynamic role you will support a mixture of R&D and product development activities within a leading autonomy and unmanned systems company. Blue Bear continuously innovates within the core area of Unmanned Aerial Systems (UAS/UAV) such as flight management systems, autopilots, mission systems, ground control stations, and all supporting systems and infrastructure. Your role as a Flight Control Systems Engineer will involve developing, maintaining and testing safety critical software that contribute to the flight systems of our aircraft. You will contribute to requirements definition, and use MATLAB/Simulink tools to generate software such as novel flight control laws and data manipulation algorithms. After verification and validation performed using bespoke simulations, you will then be expected deploy the software on to the target hardware, and conduct real world flight testing at our test facility less than 1km from the office. You may be asked to present the findings of the testing in reports or customer facing presentations. As well as undertaking technical tasks, you will be expected to take an active role in the team. This will include contribution to the development of standard operating processes, continuous improvement of methods and techniques, and ensuring quality targets are satisfied. Working as part of a team in a multidisciplinary environment you will have good communication skills. A can-do attitude and a genuine passion for innovative technology. The opportunity will enable the successful candidate to gain knowledge of cutting-edge autonomous systems and offer a large scope for career development. • Degree in aerospace engineering or similar., • Understanding of aerodynamics and flight mechanics, and their impact on flight control., • Experience in using MATLAB/Simulink for developing algorithms and control laws., • Hands-on experience in designing and commissioning control systems., • Existing SC Clearance., • Experience designing and implementing guidance, navigation and control algorithms for fixed and/or rotary wing vehicles., • Knowledge of state-of-the-art for sensing systems., • Hands-on experience with small UAS., • Mathworks' Stateflow, Simulink Coder and Embedded Coder packages., • Experience developing mathematical algorithms e.g. Data fusion, state estimation etc., • Experience working with embedded systems, real-time systems, safety critical systems., • Knowledge of communication systems., • Version control systems e.g. git., • C++, Java, Python development skills., • Experience with quality standards for software (e.g. DO-178, ED-20x). As a National Security Vetting clearance is required for this role, applicants will be required to hold National Security Vetting clearance to SC level or have the ability to gain it. By submitting an application to Saab UK you consent to undertaking workforce screening activities that may include but are not limited to: Baseline Personnel Security checks, National Security Vetting, reference checks, verification of working rights and in all circumstances preferred candidates will be placed through a security interview. #J-18808-Ljbffr

We’re seeking a Senior Mechanical Design Engineer (Tooling) to join our team based in Ampthill, Bedfordshire. The Operations Engineering team provides engineering resources to support Operational performance and major product development projects; from design through to engineering build and production support, to end of life of product. The team provides full product lifecycle support including prototype design & build, development and integration of the build documentation and supporting requirements of full production build. This role will be required to Design, develop and implement industrial tools, dies, gauges, jigs, fixtures, prototype model production and machine attachments required for production or experimental use, considering such factors as accessibility, economy, mobility, and performance requirements. will be required to have a good working knowledge of CAD design tools such as CREO and Windchill. Design involvement through the full product lifecycle, with the aim to reduce manufacturing costs and improve yield at all stages, which will directly impact our customers, whilst supporting the Programme in delivery of the milestones. As part of the Operations Engineering Team, the Mechanical Design Engineer (Tooling) is the recognised point of contact for all matters related to their area of expertise, providing engineering advice, problem solving and co-ordination of activities in support of current and future business. The Mechanical Design Engineer (Tooling) will drive a proactive approach to right first time quality to promote growth, will enhance the reputation of the business through exceptional quality standards and contribute towards a significant reduction in overall manufacturing costs. • Develop manufacturing tooling within any of the following technologies;, • Assembly, Integration and Test, • Machining, • Composite layup, • Additive Manufacturing, • Designing any new tooling & fixturing requirements, • Experienced in the creation of Technical Requirement Specifications, • Creation of detailed process instructions, • Creation of Manufacturing BOM’s / routings to aid ease of manufacture., • Active participation in customer and programme meetings., • Assist with the Technical requirements of the relevant section of the Capital plan from definition to acceptance., • Supporting full rate production of a range of products aligned to the LMUK Ampthill Business requirements., • Close liaison of activities with Industrial Engineering, Production Engineering and other functions., • Support with the business process reviews and generation / update of relevant documentation. The successful candidate must be able to achieve the appropriate level (SC) of security clearance. More details can be found here • Knowledge of Manufacturing technologies., • Good communication skills that can sell and influence to a range of audiences internally and externally with the ability to work with all levels of the business., • An independent thinker, able to take an assertive stance to enforce the key requirements of quality and the customer., • Demonstrate a level of design and manufacturing process industry experience, • Knowledge of, Lean Manufacturing, Six Sigma methodology, Quality toolset experience., • An understanding of GD&T (Geometric Dimensioning & Tolerances) with the ability to identify key characteristics and datum structures., • Familiar with the use of CAD software (CREO) to generate technical drawings, • Experience of preparing operational documentation and manufacturing data-packs., • Experience of driving change in process, behaviour and culture., • Awareness of DFM/A and PFMEA principles and the use of them in a practical application to support Industrial Engineering activity., • Strong analytical skills., • Key competences: Personal accountability, building relationships, planning for results, customer first, adaptability. #J-18808-Ljbffr

Saab UK, part of Scandinavia’s defence leader, seeks a Flight Control Systems Engineer in Bedfordshire. You will develop and test safety-critical flight software using MATLAB/Simulink, deploy to hardware, and conduct real-world flight tests near the office. You will contribute to requirements, improve processes, and work in a multidisciplinary team with a strong focus on autonomous systems and cutting-edge technology. #J-18808-Ljbffr

Saab UK is part of Scandinavia's largest defence company, bringing together the best of Swedish and British innovation. Saab offers world-leading solutions and services in defence, aviation, space, and civil security to keep people and society safe. Our UK presence has been growing at pace, meaning we can offer a wide range of opportunities for personal fulfilment and career growth. We currently employ over 600 people across eight sites in the UK, and our specialisations include software engineering, underwater robotics, radars, AI, and armed forces training. This role is part of our Blue Bear Business in Bedford. The Flight Test Engineer will manage the preparation and comprehensive support of flight operations for unmanned aerial vehicles. Bridging the gap between engineering and field testing, this role drives the rigorous evaluation of systems through test planning, flight execution, and deep-dive analysis. Ideally serving as a UAV pilot, the successful candidate will ensure safety and compliance throughout the testing lifecycle. • Test Planning: Design and author comprehensive flight test plans, risk assessments, and procedures aligned with engineering objectives and safety standards., • Flight Preparation: Oversee the preparation, ground testing, and final checks of UAV systems prior to flight operations., • Flight Test Execution: Lead or heavily support active flight testing in the field, operating as a UAV pilot to gather required telemetry and performance data., • Post Flight Analysis: Download, processing, and analysing flight data to evaluate system performance against design metrics., • Reporting: Generate detailed flight test reports, presenting technical metrics and actionable insights to engineering teams., • Demonstrated experience in uncrewed or crewed flight test operations, test card generation, and telemetry analysis., • Practical experience and certification as a UAV pilot, capable of manual and autonomous flight operations., • Strong analytical skills for interpreting complex flight data and translating it into engineering feedback., • Experience or familiarity with Civil and Military Aviation regulatory requirements (CAA, MAA, EASA) and industry standards., • Ability to obtain UK Security Clearance (SC level)., • 30 days annual leave, • Workplace pension scheme with 8% company contribution, • Private medical insurance, • Death in service insurance, • Up to 5% share matching scheme, • Company enhanced Maternity/Adoption & Paternity leave., • + Much more #J-18808-Ljbffr

Company description: Fantastic challenges. Amazing opportunities. GKN Aerospace is reimagining air travel: going further, faster and greener! Fuelled by great people whose expertise and creativity sets the standards in our industry, we're inspired by the opportunities to innovate and break boundaries. We're proud to play a part in protecting the world's democracies. And we're committed to putting sustainability at the centre of everything we do, opening up and protecting our planet. With over 16,000 employees globally, across 33 manufacturing sites in 12 countries we serve over 90% of the world's aircraft and engine manufacturers. There are no limits to where you can take your career. Job description: Job Summary It's great to know you're making a difference to the future of aviation! Whatever part you play you'll be helping us deliver operational excellence to our customers. Based at our Luton manufacturing plant you'll do just that. Established in 1993, GKN Aerospace in Luton is a world leader in commercial and military ice protection systems and transparencies. Offering a full range of capabilities; design, analysis, testing, certification and manufacture of electro-thermal ice protection, military fast jet canopies and flight deck windows to over 20 programmes including: Boeing 787, Dreamliner, Airbus A320, AgustaWestland, AW101, Eurofighter Typhoon and Lockheed, Martin F-22 Raptor. Our customers include Boeing, Airbus, Lockheed Martin, Bell Helicopters, Textron, BAE Systems, Pratt & Whitney, Leonardo. Our Luton site is home to 370+ employees and onsite facilities including onsite parking, food hub and vending machines. As a Senior Systems Engineer (Electronics) you will draw on your diverse engineering background and the product lifecycle awareness to work on a variety of research activities in the TRL1-6 range. You must have sound experience in leading technical work, including budgeting, schedule and risk management. You will be capable of achieving through others internally and externally, and you will be committed to development of your own skills and professional network. Your proactive nature will enable you to understand and adapt to new technology areas quickly. The Luton team is focussed on developing product and manufacturing process technology related to aircraft ice protection systems and specialist structures for both civil and defence applications. The areas of activity cover but is not limited to: Electro-thermal systems and Electro-mechanical systems, Specialist materials and coating systems, Embedded and structural composites, Aircraft transparencies, Icing modelling and analysis, Sensing and data acquisition, Electrical and software control systems and digital engineering / manufacturing. This role is to provide analysis and design data to support ice protection system design through modelling and simulation of in-flight icing behaviour of aircraft surfaces, or representative surfaces. It is further expected that the role holder develop an in-depth understanding of the icing wind tunnel facility capabilities, and provide consultation and support to customers and other third party users ensuring testing is conducted in line with relevant standards and specifications and contributing to test reports as required. This expertise is to be developed through understanding icing physics and aircraft ice protection philosophies (particularly electrothermal), and through practical experimentation and modelling verification using the research icing wind tunnel. The successful candidate should have a broad engineering knowledge base but have a desire to specialise and in time develop the in depth knowledge to become a subject matter expert in icing analysis and testing, being able to support next generation ice protection system designs. We are seeking someone adaptable in their approach to work, and be willing to understudy other team members in their areas of expertise to ensure project objectives are met. As a Senior Systems Engineer (Electronics), you will be naturally curious and seek to increase/deepen your own technical knowledge through study, collaborative working, hypothesis testing and experimentation. Core operational hours at our Luton site are: 07:30 - 16:30 Monday to Thursday & 07:30 - 12:30 Friday. The role requires flexibility for occassional national travel to meet with customer and we offer the opportunity to work from home up to two days per week dependent on business need. Job Responsibilities • Responsible for the technical delivery of allocated project deliverables, or project work packages, ensuring the research objectives have been satisfied., • You may have budget accountability for a Work Stream or Work Package, • Support or lead any necessary 'hands on' development test work and development trials that are required to meet your Work Package/Work Stream delivery objectives., • Support or lead the design of external work packages to be carried out by third parties in order to meet project research objectives., • Responsible for accurately capturing and recording data and results from test work and development trials., • Responsible for raising and issuing high quality and detailed technical documentation., • Seek to understand the strategic direction of the target products or manufacturing process technologies being developed within your project(s), • Responsible for preparation of Technology Development Plans and Technology Business Cases within your project(s), • Ensure all planning documentation in your responsibility is regularly updated, accurate, and delivery is on track. You may also have schedule accountability for your project(s), • Suggest and explore exploitation routes, aligned with the guidance of the Work Stream Lead., • Drive project(s) toward exploitation, identifying and supporting industrialisation scenario development., • Support project stakeholder management with internal/external customers, and you may lead management of supply chain partners in some cases., • Take an active role in creating a personal development plan linked to GKN's TEF and will be responsible for delivering on agreed objectives supported by your line manager, • Ensure EHS policy and process adherence for your activities, and you will contribute to a proactive EHS culture in the wider team., • Contribute to the development of GKN as a 'Great Place to Work', aligned with the core principles - safe, innovative, open & honest, care & respect, and ownership. Profile description: What You'll Bring To help us make a difference, you'll bring your passion and talent for what you do along with the following skills, experience, qualifications and attributes: Essential: • HNC, degree or equivalent experience in electrical or systems engineering, • Experience delivering designs for electro-mechanical, sensing OR controller systems within an engineering environment, • Electronics pcb design experience, • Good general engineering/technology knowledge base and can demonstrate strategic thinking., • Working knowledge of aerodynamics and an appreciation of physics based modelling approaches for thermodynamic analysis., • Experience of test/experimental design, and practical execution in laboratory or test facility conditions to defined standards, and be able to contribute to the development of new test methods., • Strong self-starter, able to execute tasks according to plan., • Logical and methodical approach to task planning., • Experience managing deployed resources (people you lead but you are not their line manager)., • Good interpersonal and communication skills, and can confidently translate complex information to a variety of audiences and you are able to represent your project(s) and GKN values in internal/external review meetings. Desirable: • A higher degree qualification such as a Masters, PhD or EngD, • General awareness of budget and schedule management., • An awareness of aerospace certification requirements., • Experience of the Systems Development Lifecycle process, • You will be developing your own network and you will have a general awareness of key companies and key individuals who operate in the wider aerospace technology and engineering field We are looking for people who want to make a difference, talented members with the skills and passions to become the best of the future in what they do. Note: Some GKN programmes are subject to regulatory restrictions which may impact certain nationalities. As part of the application process you will be asked to declare when applying for this role. The position requires UK National Security Vetting (UKNSV) Security clearance (SC) due to the nature and responsibilities of the work carried out. In order for us to obtain an SC you usually need to have been resident in the UK for a minimum of 5 years to current date (but we do assess each case individually). We offer: What We'll Offer Once you're on board you'll get the following perks and benefits: • Competitive salary dependent on experience, • The opportunity to earn up to 15% bonus, • Industry Leading Pension Scheme = we'll match your contributions up to 8% on a 1 : 1.5 basis, • Life Assurance 8 x salary, • 185 hours holiday + bank holidays, • Income protection, • Shopping discounts, • Cycle To Work Scheme, • Employee Assistance Programme, • Virtual GP Clinic for you and immediate family, • Electric Vehicle (EV) salary sacrifice scheme (Insurance, servicing, maintenance, roadside assistance and more included), • Free onsite parking, • Local gym discount, • Free airport parking, • Enhanced family friendly leave, • A collaborative, dynamic working environment As well as a competitive package we'll offer you a world of opportunity. We want to see your career fly! We'll support your career progression by providing you with learning and development opportunities. That's the beauty of being part of a global business, once you're on board you never know where you career journey may take you! Join us and keep the world moving … click on the link below to apply A Great Place to work needs a Great Way of Working Everyone is welcome to apply to GKN. We believe that we can only achieve our ambitions through a coming together of diverse minds who enjoy collaborating in an inspirational environment. Through our commitment to diversity, inclusion and belonging and by living our five powerful principles we've created a culture where everyone feels welcome to contribute. It's a culture that won us ‘The Best Workplace Culture Award'. By embracing and celebrating what makes us unique we encourage everyone to bring their full self to work. We're also committed to providing an accessible recruitment process, so if you require reasonable adjustments at any stage during our recruitment process please get in touch and let us know. We are the place where human dreams, plus human endeavour, shape the future of aerospace innovation and technology. ? JBRP1_UKTJ

Introduction Saab UK is part of Scandinavia's largest defence company, bringing together the best of Swedish and British innovation. Saab offers world-leading solutions and services in defence, aviation, space, and civil security to keep people and society safe. Our UK presence has been growing at pace, meaning we can offer a wide range of opportunities for personal fulfilment and career growth. We currently employ over 600 people across eight sites in the UK, and our specialisations include software engineering, underwater robotics, radars, AI, and armed forces training. What you will be part of Saab is a leading defence and security company with an enduring purpose, to help nations keep their people and society safe. Empowered by its 28,000 talented people, Saab constantly pushes the boundaries of technology to create a safer and more sustainable world. Saab designs, manufactures and maintains advanced systems in aeronautics, weapons, command and control, sensors and underwater systems. Saab is headquartered in Sweden. It has major operations all over the world and is part of the domestic defence capability of several nations. The Role: This role is part of the Saab UK Bluebear Business based in Bedfordshire. Your role as a Mechanical Design Engineer will be to support Head of Engineering on multidisciplinary design challenges involved in the development of unmanned systems. This represents an exciting opportunity to provide technical leadership of innovative products including requirement management, design, integration, manufacturing and testing. Some travel within the UK may be required for this role. Key Responsibilities Perform day-to-day CAD design activities and manage multidisciplinary design requirements across aerospace development projects Support the delivery of assigned work packages, ensuring progress against schedule, cost and risk objectives Contribute to design, integration, verification, and test activities throughout the product development lifecycle Develop innovative product concepts, prototypes, & designs using CAE, CAD, & CAM tools Select materials and manufacturing methods for composite and metallic aerospace components Support payload & propulsion system integration activities, including all-electric propulsion & eVTOL applications, while working with aircraft concepts team to assess aircraft performance impacts & contributing to aircraft-level optimisation Prepare and maintain engineering documentation, specifications, DFMEAs, and risk assessments Engage with customers to understand requirements and apply emerging technologies where appropriate Assist programme management activities, including estimating, planning, dependency management and progress tracking Required Qualifications/Skills Degree/HND in Mechanical or Aerospace Engineering, or other related engineering discipline Experience using SolidWorks including solid modelling, surfacing, assemblies, detailing and BoM creation Experience producing engineering drawings and technical documentation to recognised standards Experience supporting product development from concept through detailed design, manufacture, assembly and test Ability to perform first-pass engineering analysis (basic FEA & CFD) to support design decisions Understanding of material selection and manufacturing processes for metallic and composite components Understanding of Design for Manufacture and Assembly (DFMA) principles Experience developing prototypes and supporting integration and testing activities Ability to understand and translate customer requirements into engineering solutions Desired Qualifications/Skills Experience within the aerospace, UAV, defence, space, or advanced air mobility sectors By submitting an application to Saab UK you consent to undertaking workforce screening activities that may include but are not limited to: Baseline Personnel Security checks, National Security Vetting, reference checks, verification of working rights and in all circumstances preferred candidates will be placed through a security interview. TPBN1_UKTJ

Senior Mechanical Engineer Bedford, UK Hybrid Working £50,000 - £60,000 + Bonus + Benefits We are looking for an experienced and innovative Senior Mechanical Engineer to help develop the next generation of fertility and pregnancy products. Based in Bedford, you will play a key role in product development from concept through to manufacture and launch, working within a multidisciplinary R&D team. This is an exciting opportunity for an Engineer who enjoys solving technical challenges, driving innovation and contributing to products that positively impact people's lives. About SPD Swiss Precision Diagnostics (SPD) is a global leader in consumer diagnostics and the joint venture between Procter and Gamble (P&G) and Abbott . Our Clearblue brand is recognised worldwide for accurate home pregnancy and fertility monitoring products. The Role As a Senior Mechanical Engineer, you will provide technical leadership across the full product lifecycle, from concept development and prototyping through to manufacture and product launch. You will work closely with cross-functional teams and external partners to develop robust, manufacturable designs while ensuring compliance with quality and regulatory standards. You will also support process engineering activities, helping transfer new products into manufacturing and drive continuous improvement initiatives. Key Responsibilities Mechanical Engineering: Lead the resolution of complex mechanical engineering challenges. Develop innovative product designs using DFM and DFA principles. Produce and maintain technical documentation, specifications and reports. Lead risk management activities including Risk Assessments and FMEA. Plan and oversee testing and validation activities. Collaborate with external suppliers and manufacturing partners, including those in China. Design and manufacture jigs, fixtures and test equipment. Develop scalable prototype assembly and manufacturing processes. Conduct engineering analyses including tolerance stack-ups and FEA. Create and maintain 3D CAD models and drawings using SolidWorks. Manage prototype and tooling development through suppliers. Support innovation and patent activities with IP specialists. Process Engineering: Design and improve manufacturing processes for safety, quality and cost efficiency. Lead continuous improvement projects using Six Sigma methodologies. Produce manufacturing documentation and work instructions. Support Design Transfer and new product introduction activities. Investigate manufacturing issues using root cause analysis and CAPA. Support process validation, equipment validation and production scale-up. About You Essential: Degree in Mechanical Engineering or a related discipline. 5+ years' experience in a manufacturing or engineering environment. Experience in product development, design transfer and manufacturing / process engineering. Experience working within regulated industries, ideally medical devices or diagnostics. Knowledge of ISO 13485, IVDR and FDA requirements. Strong analytical skills including tolerance analysis and FEA. Proficiency in 3D CAD software, ideally SolidWorks. Excellent communication and technical reporting skills. Ability to manage multiple priorities in a fast-paced environment. Desirable: Medical device or diagnostics product development experience. Knowledge of process and equipment validation. Experience applying DFM and DFA principles. Understanding of DoE, Six Sigma and continuous improvement tools. Experience supporting manufacturing optimisation and regulatory compliance. What You'll Bring: Proactive problem-solving approach. Strong leadership and stakeholder management skills. Ability to influence technical decisions and deliver results. Passion for innovation and engineering excellence. Additional Information: International travel required several times per year. What We Offer: Hybrid working (3 days on site, 2 from home) 25 days annual leave plus bank holidays Competitive pension scheme Private Medical Insurance and medical cash plan Enhanced maternity and paternity pay Health and Wellbeing programme Life assurance Free electric vehicle charging Attractive parkland location with excellent links to Cambridge, Milton Keynes and London Interested Click apply and you will be redirected to our careers page to complete your application. TPBN1_UKTJ

Saab UK is part of Scandinavia’s largest defence company, bringing together the best of Swedish and British innovation. Saab offers world-leading solutions and services in defence, aviation, space, and civil security to keep people and society safe. Our UK presence has been growing at pace, meaning we can offer a wide range of opportunities for personal fulfilment and career growth. We currently employ over 600 people across eight sites in the UK, and our specialisations include software engineering, underwater robotics, radars, AI, and armed forces training. Saab is a leading defence and security company with an enduring purpose, to help nations keep their people and society safe. Empowered by its 28,000 talented people, Saab constantly pushes the boundaries of technology to create a safer and more sustainable world. Saab designs, manufactures and maintains advanced systems in aeronautics, weapons, command and control, sensors and underwater systems. Saab is headquartered in Sweden. It has major operations all over the world and is part of the domestic defence capability of several nations. Blue Bear is a leading autonomy and unmanned systems company. We are continuously innovating within the core area of Autonomy and Unmanned Aerial Systems (UAS) such as air vehicles, autopilots, navigation solutions, mission systems and ground control stations. We are currently seeking engineers to help conceptualise, size and mature the next generation of our air vehicle platforms. We are seeking a UAV Concept Engineer to strengthen our early-stage design capability: turning requirements and CONOPS into sized, analysed and testable air vehicle concepts through rapid, iterative trade studies. This role is central to our conceptual design loop, by early exploring design trade space and rapidly iterating through geometry, aerodynamics, weights, propulsion, mission and stability. A defining part of this role is closing the loop between analysis and reality. You will synthesise data from bench and flight testing, flight logs, telemetry and measured performance and feed it back to correct and improve our conceptual models, sizing methods and surrogates, so each design iteration is grounded in real evidence. Working as part of the Concepts team, you will bring a proactive, collaborative approach and a passion for fast iteration, sound engineering judgement and building tools and methods that make the whole team faster. • Perform aircraft conceptual sizing and constraint analysis (wing loading vs thrust/power-to-weight, weight closure, mission/energy sizing) to define feasible design points for new UAV concepts., • Develop and morph parametric air vehicle geometry and Outer Mould Line and drive it through the analysis loop, regenerating a concept from a defined parameter set., • Produce the core conceptual outputs each iteration: drag polars, lift curves, weight breakdowns, mission energy/endurance, static margin, trim and control authority., • Run trade studies and design-space exploration to make optimisation and sensitivity studies fast enough to explore many designs., • Synthesise flight-test and bench-test data (flight logs, telemetry, measured aero/propulsion performance) and use it to validate, calibrate and improve conceptual models and sizing methods., • Select and shape propulsion system concepts and integrate them into mission and energy-network performance analysis., • Maintain, improve and where appropriate build the concept-design toolchain and automation that underpins rapid iteration (geometry, aero, mission, surrogate and data-processing tools)., • Capture and communicate design risk, where the design is immature or sensitive and feed it into the programme risk register., • We are specifically looking for someone with hands-on experience in aircraft sizing, concept-design tooling, and the synthesis of flight-test data to improve models, • Demonstrable experience in aircraft / UAV conceptual design and sizing, constraint analysis, weight and mission/energy sizing, and closing a design point., • Hands-on experience with conceptual and preliminary design tools such as OpenVSP, RCAIDE, AVL, XFLR5, Datcom or equivalent in-house tools., • Sound applied aerodynamics knowledge, drag build-up, lift curves, drag polars and the ability to generate and interpret them for design decisions., • Experience synthesising flight logs / telemetry / test data and using it to validate and improve analytical models (model calibration, correlation to test)., • Strong scripting and analysis skills in Python (or similar) for automation, data processing and building/using design tools., • Working understanding of the full conceptual design loop: geometry, aerodynamics, weights, propulsion, mission performance and stability & control, and how the disciplines couple., • Ability to work iteratively, favouring fast, defensible estimates over slow precision at the conceptual stage, and to communicate assumptions and uncertainty clearly., • Strong problem-solving skills, sound engineering judgement, and a proactive approach to improving methods and tools., • Ability to work collaboratively across a small, multidisciplinary engineering team., • Structural analysis, FEA, airframe structural sizing., • Stability & control analysis, flight dynamics modelling, and handling-qualities assessment., • Design-of-experiments for sub systems., • Propulsion sizing and integration of electric, hybrid-electric or gas turbine systems., • Experience with PX4 / ArduPilot, SITL/HITL simulation, and processing autopilot flight logs (ULog, MAVLink)., • CAD and geometry handling; exporting/meshing surfaces for higher-fidelity aero (panel/CFD)., • Mid- to high-fidelity aero exposure (panel methods such as FlightStream, or RANS CFD) for validating key design points., • Experience working in safety-critical, regulated or defence environments., • Ability to gain SC Clearance., • 30 days annual leave, • Workplace pension scheme with 8% company contribution, • Private medical insurance, • Death in service insurance, • Up to 5% share matching scheme, • Company enhanced Maternity/Adoption & Paternity leave., • + Much more By submitting an application to Saab UK you consent to undertaking workforce screening activities that may include but are not limited to: Baseline Personnel Security checks, National Security Vetting, reference checks, verification of working rights and in all circumstances preferred candidates will be placed through a security interview. #J-18808-Ljbffr

Salary: £58,000 - £71,500 plus excellent Benefits Working Pattern: 37.5 hours per week | 4 day working week Monday to Thursday Responsible for development of IT solutions across all components of software systems through design, integration, implementation and support. Proficient in infrastructure, security, software development, database management systems, and systems integration. Develops using agile processes and common technology stacks. Full Stack Engineer Remote – UK Salary: £58,000 - £71,500 plus excellent Benefits Working Pattern: 37.5 hours per week | 4 day working week Monday to Thursday Responsible for development of IT solutions across all components of software systems through design, integration, implementation and support. Proficient in infrastructure, security, software development, database management systems, and systems integration. Develops using agile processes and common technology stacks. • Experience with Linux and Windows environments and the ability to build, configure, and maintain via Command Line Interface, • DevOps experience building CI/CD Pipelines, • Experience scripting with Python and BASH, • Familiarity with application containerization, APIs, services, • Experience using AI tools for creating, modifying, testing and documenting code, • Knowledge of common tools such as GitLab and Service Now, • Experience with Containers, Kubernetes, Terraform, Go, Splunk, Ansible, Helm, Git, CI/CD, • Experience with Infrastructure as Code, Orchestration and Automation, • Must have excellent people, communication and troubleshooting skills, • Experience with Services (e.g., service mesh, other microservices), • Experience configuring and troubleshooting AI hardware such as (H200s, A100s, etc.) for use in a Kubernetes cluster, • Technical experience with capturing requirements, system design, implementation and test, • Experience with System Administration in a large and distributed environment, • BS Degree in Computer Science, Electrical, Computer or related degree and prior relevant experience, • Demonstrated experience working in teams leveraging methodologies and/or understanding of development concepts, • Experience developing and deploying apps in on-premise environments as well as to the public cloud, • Experience working in a virtual organization, • Individual should be comfortable working in a fast-paced, startup-like environment #J-18808-Ljbffr

GM Performance Power Units - Concord, NC Battery Controls Engineer - Onsite Job Summary GM Performance Power Units is looking for a forward-thinking Battery Controls Engineer to join our ERS (Energy Recovery System) Team in Concord, NC. In this high-stakes, high-impact role, you'll develop and optimize robust embedded controls software for our Formula 1 hybrid powertrain. Implement cutting-edge real-time control algorithms for battery protection, state of charge, and state of health. While utilizing sensors and communication protocols and system diagnostics, supporting the overall ERS hardware and software ecosystem. Collaborate with control strategy teams managing torque and energy delivery and harvest to push the boundaries and engineer winning solutions. Key Responsibilities Develop, test, and maintain embedded software in C, C++, and relevant real-time programming languages for the HV battery management system, cells, and associated components. Implement sensor data acquisition, hardware abstraction layers, real-time communication, and diagnostics features. Collaborate with cross-functional teams in controls and electrical hardware to ensure cohesive system operation. Conduct software debugging, verification, and validation including model-in-the-loop (MiL), software-in-the-loop (SiL), hardware-in-the-loop (HiL), and trackside testing support. Create proper requirements and unit tests to form robust, clean, scalable code bases. Adhere to software quality, safety, and regulatory standards for high-performance motorsport applications. Maintain technical documentation and contribute to continuous improvement processes in embedded software development. Required Qualifications Master's or PhD in Electrical Engineering, Computer Science, Embedded Systems, or related discipline; OR Bachelor's degree with 5+ years of experience in embedded software development, preferably in automotive or motorsport sectors. Expertise in battery management systems and battery control algorithms, such as protection/derating, state of charge, and state of health. Familiarity with cell and HV battery physics and operation. Understanding high voltage bus networks, including contactors, fuses, and high voltage interlock loops. Strong proficiency in embedded C programming and real-time operating systems, including ability to work with both handwritten and auto generated code. Experience with multithreaded processes/multi-rate control systems. Experience in communication protocols such as CAN, CAN FD, Ethernet, SPI, I2C, and UART. Familiarity with software development tools, debugging environments, and version control systems. Understanding of control theory (digital control loops and practical implementation issues) for electronic systems. Knowledge of embedded hardware interfaces, sensors, and microcontroller architecture. First principles thinking, strong problem-solving skills and attention to detail. Excellent teamwork, communication, and collaboration abilities. Proactive attitude toward continuous learning and innovation in embedded systems development. Preferred Qualifications Understanding of functional safety standards (ISO 26262) and FIA F1 technical regulations is advantageous. Machine Learning/neural networks especially in the context of battery control systems. Embedded on chip machine learning. Knowledge of scripting languages (Python, MATLAB) for testing and automation. Prior experience with software-in-the-loop (SiL) or hardware-in-the-loop (HiL) testing and software validation frameworks. Experience in Functional Mock-up Unit (FMU) development and co-simulation techniques. Familiarity with TAG-700 ECU. Why Join Us Ready to be part of a team that pushes boundaries both on and off the track? At GM Performance Power Units, we are developing a new era of performance for the Formula 1 grid. Joining us means entering a startup racing environment backed by a legacy of engineering excellence, giving you the rare opportunity to help build a world-class program from day one. We believe in rewarding innovation and powering potential. As part of our team, you'll benefit from a competitive and comprehensive package designed to support your performance, well-being, and future, helping you thrive at every level. • Bonus scheme, • Private healthcare 401(k) plan including company match, • Employer-paid life insurance and disability coverage, • 32 days annual leave (including holidays), • Free financial advisor access, • Employee Assistance Programs (EAP), • Subsidized on-site dining, • On-site gym, • Discounted GM vehicle purchase/lease program, • Free on-site EV charging for personal GM vehicles Please note: GM Performance Power Units and all affiliated companies are Equal Opportunity employer(s). Minorities, women, veterans, and individuals with disabilities are encouraged to apply. For more information regarding the EEOC, please visit Only direct hires need apply to or inquire about job postings at GM Performance Power Units. We are not accepting calls, resumes or applications from recruiting firms at this time. #J-18808-Ljbffr

What does it take to make complex EW and Future Combat Air systems react in real time, under extreme conditions? At Leonardo, it's the FPGA logic at the heart of those systems that makes the difference. As an FPGA Design Engineer working on our EW and FCA programmes, you'll help develop the programmable logic that enables high-speed sensing, signal processing and decision-making in mission-critical environments. Based primarily in Luton, this role combines real programme delivery with access to a structured FPGA Academy, allowing capable engineers to deepen and accelerate their FPGA expertise while contributing to live EW and combat-air systems. Hybrid working is supported, with on-site presence flexing to meet programme needs. • Design, develop and verify FPGA logic for advanced electronic warfare and combat-air systems., • Work on modern FPGA platforms supporting: High-speed data movement and sensor interfaces., • Deterministic, low-latency processing chains., • Embedded processing using SoC devices and soft-core processors. Support the delivery of FPGA solutions enabling advanced signal processing, control and real-time data handling. Translate system-level requirements into robust FPGA architectures and implementations. Implement, simulate and verify designs using structured FPGA development and verification methodologies. Support integration, bring-up and debug of FPGA designs within complex hardware platforms in advanced electronics laboratories. Collaborate closely with hardware, systems and software teams to deliver fully integrated EW and FCA system solutions. Participate in design and technical reviews, and where required, support activity across UK sites or customer locations. Alongside project delivery, you'll be supported by a structured FPGA Academy, with training modules aligned to both your existing background and the needs of the EW and FCA programmes you're supporting. This is a role where progression comes through technical depth and delivery, not job titles alone. Initially, you'll focus on building confidence developing and verifying FPGA designs while contributing meaningfully to EW and FCA programmes. As experience grows, you'll take ownership of larger FPGA features or processing chains, influencing architectural and implementation decisions. With proven delivery and judgement, progression leads naturally to Senior and Principal FPGA roles, where you shape FPGA strategy, mentor others and influence system-level solutions. Growth is driven by technical authority, problem-solving and trust earned through programme delivery. • HNC/HND or degree-level knowledge in a relevant discipline (e.g. Electronic Engineering, Computer Science, Physics or similar), or equivalent practical experience., • Experience working within a structured engineering development lifecycle., • Exposure to digital systems, programmable logic, or hardware-proximate development., • Awareness of high-speed interfaces and digital design concepts (e.g. Ethernet, PCIe, JESD, LVDS)., • Hands-on experience supporting system-level debug and test, using appropriate electronics tools., • Prior FPGA or HDL development experience., • Experience with embedded processing, SoC-based designs or real-time systems., • Background in defence, aerospace or other high-reliability industries, where performance and robustness are critical. Leonardo UK operates a grade-based salary framework with broad bands. The salary range shown reflects the approved grade band for this role, or a narrower hiring range published within that band, and is benchmarked against the external market. Exceptions above the standard range are managed through governance controls to protect internal equity. Leonardo offers an additional allowances for some roles - for more information please contact. Leonardo is a global leader in Aerospace, Defence, and Security. Headquartered in Italy, we employ over 53,000 people worldwide including 8,500 across 9 sites in the UK. Our employees are not just part of a team-they are key contributors to shaping innovation, advancing technology, and enhancing global safety. At Leonardo we are committed to building an inclusive, accessible, and welcoming workplace. We believe that a diverse workforce sparks creativity, drives innovation, and leads to better outcomes for our people and our customers. If you have any accessibility requirements to support you during the recruitment process, just let us know. • Time to Recharge: Enjoy generous leave with the opportunity to accrue up to 12 additional flexi-days each year., • Secure your Future: Benefit from our award-winning pension scheme with up to 15% employer contribution., • Your Wellbeing Matters: Free access to mental health support, financial advice, and employee-led networks championing inclusion and diversity (Enable, Pride, Equalise, Armed Forces, Carers, Wellbeing and Ethnicity)., • Rewarding Performance: All employees at management level and below are eligible for our bonus scheme., • Never Stop Learning: Free access to 4,000+ online courses via Coursera and LinkedIn Learning., • Refer a friend: Receive a financial reward through our referral programme., • Tailored Perks: Spend up to £500 annually on flexible benefits including private healthcare, dental, family cover, tech & lifestyle discounts, gym memberships and more., • Flexible working: Flexible hours with hybrid working options. For part time opportunities, please talk to us about what might be possible for this role. #J-18808-Ljbffr

Senior Mechanical Design Engineer (Tooling) Ampthill, Bedfordshire, UK 37.5 hours per week + 4-day work week option We’re seeking a Senior Mechanical Design Engineer (Tooling) to join our team based in Ampthill, Bedfordshire. The Operations Engineering team provides engineering resources to support Operational performance and major product development projects; from design through to engineering build and production support, to end of life of product. The team provides full product lifecycle support including prototype design & build, development and integration of the build documentation and supporting requirements of full production build. This role will be required to Design, develop and implement industrial tools, dies, gauges, jigs, fixtures, prototype model production and machine attachments required for production or experimental use, considering such factors as accessibility, economy, mobility, and performance requirements. You will be required to have a good working knowledge of CAD design tools such as CREO and Windchill. You will have design involvement through the full product lifecycle, with the aim to reduce manufacturing costs and improve yield at all stages, which will directly impact our customers, whilst supporting the Programme in delivery of the milestones. As part of the Operations Engineering Team, the Mechanical Design Engineer (Tooling) is the recognised point of contact for all matters related to their area of expertise, providing engineering advice, problem solving and co-ordination of activities in support of current and future business. You will drive a proactive approach to right first time quality to promote growth, will enhance the reputation of the business through exceptional quality standards and contribute towards a significant reduction in overall manufacturing costs. Key Responsibilities: • Develop manufacturing tooling within any of the following technologies;, • Assembly, Integration and Test, • Machining, • Additive Manufacturing, • Designing any new tooling & fixturing requirements, • Experienced in the creation of Technical Requirement Specifications, • Creation of detailed process instructions, • Creation of Manufacturing BOM’s / routings to aid ease of manufacture., • Active participation in customer and programme meetings., • Assist with the Technical requirements of the relevant section of the Capital plan from definition to acceptance., • Supporting full rate production of a range of products aligned to the LMUK Ampthill Business requirements., • Close liaison of activities with Industrial Engineering, Production Engineering and other functions., • Support with the business process reviews and generation / update of relevant documentation., • The successful candidate must be able to achieve the appropriate level (DV) of security clearance. Required skills, qualifications and experience • Knowledge of Manufacturing technologies., • Good communication skills that can sell and influence to a range of audiences internally and externally with the ability to work with all levels of the business., • An independent thinker, able to take an assertive stance to enforce the key requirements of quality and the customer., • Demonstrate a level of design and manufacturing process industry experience, • Knowledge of, Lean Manufacturing, Six Sigma methodology, Quality toolset experience., • An understanding of GD&T (Geometric Dimensioning & Tolerances) with the ability to identify key characteristics and datum structures., • Familiar with the use of CAD software (CREO) to generate technical drawings Experience of preparing operational documentation and manufacturing data-packs., • Experience of driving change in process, behaviour and culture., • Awareness of DFM/A and PFMEA principles and the use of them in a practical application to support Industrial Engineering activity., • Strong analytical skills. Personal accountability, building relationships, planning for results, customer first, adaptability. #J-18808-Ljbffr

We’re seeking a Senior Mechanical Design Engineer (Tooling) to join our team based in Ampthill, Bedfordshire. The Operations Engineering team provides engineering resources to support Operational performance and major product development projects; from design through to engineering build and production support, to end of life of product. The team provides full product lifecycle support including prototype design & build, development and integration of the build documentation and supporting requirements of full production build. This role will be required to Design, develop and implement industrial tools, dies, gauges, jigs, fixtures, prototype model production and machine attachments required for production or experimental use, considering such factors as accessibility, economy, mobility, and performance requirements. You will be required to have a good working knowledge of CAD design tools such as CREO and Windchill. You will have design involvement through the full product lifecycle, with the aim to reduce manufacturing costs and improve yield at all stages, which will directly impact our customers, whilst supporting the Programme in delivery of the milestones. As part of the Operations Engineering Team, the Mechanical Design Engineer (Tooling) is the recognised point of contact for all matters related to their area of expertise, providing engineering advice, problem solving and co-ordination of activities in support of current and future business. You will drive a proactive approach to right first time quality to promote growth, will enhance the reputation of the business through exceptional quality standards and contribute towards a significant reduction in overall manufacturing costs. • Develop manufacturing tooling within any of the following technologies;, • Assembly, Integration and Test, • Machining, • Additive Manufacturing, • Designing any new tooling & fixturing requirements, • Experienced in the creation of Technical Requirement Specifications, • Creation of detailed process instructions, • Creation of Manufacturing BOM’s / routings to aid ease of manufacture., • Active participation in customer and programme meetings., • Assist with the Technical requirements of the relevant section of the Capital plan from definition to acceptance., • Supporting full rate production of a range of products aligned to the LMUK Ampthill Business requirements., • Close liaison of activities with Industrial Engineering, Production Engineering and other functions., • Support with the business process reviews and generation / update of relevant documentation., • The successful candidate must be able to achieve the appropriate level (DV) of security clearance., • Knowledge of Manufacturing technologies., • Good communication skills that can sell and influence to a range of audiences internally and externally with the ability to work with all levels of the business., • An independent thinker, able to take an assertive stance to enforce the key requirements of quality and the customer., • Demonstrate a level of design and manufacturing process industry experience, • Knowledge of, Lean Manufacturing, Six Sigma methodology, Quality toolset experience., • An understanding of GD&T (Geometric Dimensioning & Tolerances) with the ability to identify key characteristics and datum structures., • Familiar with the use of CAD software (CREO) to generate technical drawings, • Experience of preparing operational documentation and manufacturing data-packs., • Experience of driving change in process, behaviour and culture., • Awareness of DFM/A and PFMEA principles and the use of them in a practical application to support Industrial Engineering activity., • Strong analytical skills., • Personal accountability, building relationships, planning for results, customer first, adaptability., • Knowledge of Manufacturing technologies., • Good communication skills that can sell and influence to a range of audiences internally and externally with the ability to work with all levels of the business., • An independent thinker, able to take an assertive stance to enforce the key requirements of quality and the customer., • Demonstrate a level of design and manufacturing process industry experience, • Knowledge of, Lean Manufacturing, Six Sigma methodology, Quality toolset experience., • An understanding of GD&T (Geometric Dimensioning & Tolerances) with the ability to identify key characteristics and datum structures., • Familiar with the use of CAD software (CREO) to generate technical drawings, • Experience of preparing operational documentation and manufacturing data-packs., • Experience of driving change in process, behaviour and culture., • Awareness of DFM/A and PFMEA principles and the use of them in a practical application to support Industrial Engineering activity., • Strong analytical skills., • Key competences: Personal accountability, building relationships, planning for results, customer first, adaptability. #J-18808-Ljbffr

Berkshire Grey in the United Kingdom is seeking a robotics software engineer to advance computer vision for trailer unloading and robotic manipulation. You will prototype, test, and mentor while solving real-world logistics challenges with state-of-the-art ML architectures. The role emphasizes rapid prototyping, collaboration with stakeholders, and contributing to product transitions for deployments on real robotic systems. #J-18808-Ljbffr

Nicholas Howard are delighted to be recruiting for a Senior Systems Engineer to join a leading global defence client on an initial 12month contract. Reporting to the Programme Chief Engineers, the successful candidate's specific role scope will be subject to assigned programmes, but will include a range of systems engineering activities as follows: • Classical requirements management and development on highly complex major programmes - DOORS essential., • Verification Planning., • System design, • Research Projects., • We are looking for engineers with relevant higher-level qualifications (e.g. Bachelors / Masters in Systems Engineering, Aerospace, Electrical / Electronic, Engineering)., • Candidates would ideally have higher level academic or industrial experience in Systems Engineering., • Relevant experience of the engineering development lifecycle., • Experience / understanding of MBSE as applied to various programme lifecycle stages., • Be able to multi-task: candidate will be required to lead and coordinate on work-packages, potentially across multiple programmes., • Strong communication skills required to liaise with Senior Stakeholders both within the company and customers., • Must be able to work in the UK without restrictions in accordance with UK National Law and be prepared to successfully undertake an appropriate level of UK National Security Vetting according to UK Government National Security Vetting criteria: a minimum of SC Clearance will be required for the role, however holding a DV or being prepared to go through an application immediately will be beneficial., • Requirements derivation., • Definition and monitoring of Technical KPIs., • System architecture and sub-system derivation., • Experience in varied architecture frameworks / methodologies., • Sequence/Activity/Use case Diagrams., • Interface Definitions (ICDs and IDLs)., • Data Distribution Systems and Data Links., • Research and Development, • Experience in working in a classified setting., • Experience in Architecture Frameworks (e.g. UAF / NAF), • Experience in SysML/UML using CAMEO, Rhapsody., • IBM Jazz (DOORS-NG and Test-Manager/Quality-Manager)., • Experience in Matlab & Simulink., • AI/ML Tools and techniques., • Experience of working with Software teams and developments (e.g. Agility, Sprints, Kanbans)., • Using collaborative teamworking tools (sharepoint, JIRA, Confluence)., • M&S studies such as Computational Fluid Dynamics, trajectory modelling, Finite Element Analysis or the application of complex algorithms to engineering challenges. Please note SC clearance is required for this role. Role can start on basic. #J-18808-Ljbffr

Do you have EMC awareness at product and circuit level? Do you hold a formal electrical qualification such as HNC, HND, BEng, etc.? Do you want ot work with an industry-leading company? If your answer to these is yes, then this could be the role for you! As the Lead Electrical Engineer, you will be working alongside a market-leading Defence and Aerospace company who are constantly growing and developing. They are always looking to bring on new talents such as yourself and further develop your skills to enable you to grow within the company and industry. • Take responsibility for the design, development, and support of mixed electrical/electronic solutions from concept to completion following a detailed phase-gate development process, • Define processes, specifications, and procedures that support the design and manufacture of the Electrical hardware, • Provide technical review of supplier capabilities to facilitate source selection, • Facilitate the development of functional and physical design requirements to ensure complete integrated design architecture, • Design and development of electrical circuitry (includes; power electronics, harnesses, 28V high current systems), • Analysis, test, and evaluation of Electrical circuits and components, • Electrical circuit protection analysis, • The ability to produce technical documentation to support all activities, from trade studies, requirements documentation, compliance evidence, and test documentation, • Strong team player with good written and verbal communication skills, • Formal Electrical qualification such as HNC/HND/BEng, • Experience of Electrical Hardware Design & Electrical Product Development for Harsh Environments, • Electrical analysis of derating, stress, and tolerance, • Experience of software tools (e.g. Zuken, Harnware), • EMC Awareness at product and circuit level, • Awareness of Def-Stan/Mil Standards, Safety, and Quality processes, • Ability to support and manage aspects of Assembly, Integration, and Test, • Experience of working with lab test equipment, e.g. debug of Electrical circuits, • Experience of Windchill or other Product Lifecycle Management tools If this all sounds like something you will be interested in then simply apply and we can discuss the opportunity further! #J-18808-Ljbffr

• In the role of Senior Software Engineer, Robotics, focusing on manipulation, you will play a pivotal role in enhancing the capabilities of our robotic solutions, • Your work will involve developing advanced software that enables robots to interact with their environments in completing complex, real-world tasks, • Design, develop, and support advanced robotic manipulation software deployed in production environments, • Create high-performance software solutions for robotic manipulation, focusing on motion planning, kinematics, control strategies and motion execution, to enhance our robotic solutions, • Utilize and extend simulation software environments to test and refine manipulation development, ensuring expected and robust performance, • Work closely with hardware engineers, product managers, and other software teams to integrate capabilities into our broader robotic systems, • Provide technical leadership and mentorship to junior engineers, • Clearly and proactively communicate technical priorities and status, • Healthcare - Full medical, dental and vision. Life insurance, gym stipends and wellness programs, • Vacation - We value hard work and we like to have fun. Take time when you need it, • Recognition - Peer shout outs, achievement celebrations and leadership awards let you know you've made a difference, • Retirement - Stock options and generous 401(k) matching, • Nutrients - Lunch is delivered daily, a plethora of snacks, gourmet coffee, Soylent, and top-shelf beverages Experience with version control (Git), code reviews, issue tracking (Jira) and automated testing (unit, integration, and hardware-in-the-loop)Familiarity with system design principles and design patternsUnderstanding parallel/distributed systems and asynchronous/concurrent programmingAbility to handle ambiguous or ill-defined problems, and scope, plan and implement solutions for themBachelor's degree in Robotics, Computer Science, or a closely related fieldExperience in designing and developing RESTful interfaces, gRPC services/clients, etc4+ years of professional software development experience in a production environmentAbility to work collaboratively in a team setting and communicate effectively with both technical and non-technical stakeholdersExperience in designing and implementing software and algorithms for motion planning, motion execution, multi-arm coordination, robotic kinematics, and/or environment representationStrong development expertise in PythonStrong drive to deliver well-designed, well-implemented and well-tested solutions to meet internal and external requirementsFamiliarity with Python's asyncio libraryExperience with NoSQL databases (e.g., MongoDB)Programming experience in C++Familiarity with the Linux ecosystemFamiliarity with robotics simulation tools and test environmentsExperience with development and integration of drivers for robotic hardware, particularly robotic armsExperience with ROS/ROS26+ years of experience in software development in a production environmentMaster's degree in Robotics, Computer Science or a closely related field #J-18808-Ljbffr

• As a Software Engineer on Berkshire Grey’s Scoop robotic trailer-unloading program, you will design, implement, test, deploy, monitor, and maintain software that creates, integrates, and improves the system’s robotic capabilities, • You will work with a multidisciplinary team to develop software that controls physical robotic behavior and coordinates the components required to unload packages safely, reliably, and efficiently, • This role spans the complete software lifecycle, from defining and designing new capabilities through deployment, performance analysis, and support of systems operating in real-world customer environments, • This is an ideal role for a software engineer who enjoys solving difficult problems at the intersection of software, robotics, and physical automation—and who is motivated by seeing their work operate on real systems, • Design, implement, test, deploy, monitor, and maintain software for Berkshire Grey’s robotic trailer-unloading product, • Develop software components that control and coordinate robotic behavior and other physical system functions, • Translate product, system, and customer requirements into reliable and maintainable software solutions, • Work closely with robotics, controls, perception, hardware, systems, test, product, and field engineering teams, • Develop automated tests, simulation workflows, and system-level test methods to validate new capabilities, • Debug complex issues that span software, hardware, sensors, controls, and robotic behavior, • Analyze system performance and operational data to identify reliability, quality, and throughput improvements, • Support software integration, system commissioning, and troubleshooting on development and customer systems, • Participate in architecture discussions, design reviews, code reviews, sprint planning, and other engineering activities, • Improve software quality, observability, test coverage, deployment practices, and maintainability, • Document software designs, interfaces, operating behavior, and troubleshooting procedures, • Communicate plans, progress, technical tradeoffs, and risks clearly to engineering stakeholders, • Travel to customer or development sites when needed to support integration, testing, deployment, and troubleshooting, • Healthcare - Full medical, dental and vision. Life insurance, gym stipends and wellness programs, • Vacation - We value hard work and we like to have fun. Take time when you need it, • Recognition - Peer shout outs, achievement celebrations and leadership awards let you know you’ve made a difference, • Retirement - Stock options and generous 401(k) matching, • Nutrients - Lunch is delivered daily, a plethora of snacks, gourmet coffee, Soylent, and top-shelf beverages Experience developing software on Linux, preferably UbuntuAbility to monitor and maintain deployed software to ensure reliability and qualityAbility to work through ambiguous or loosely defined problems and independently scope, plan, and implement effective solutionsAbility to work effectively as part of a multidisciplinary engineering teamExperience with Git-based version control and issue-tracking systems such as JiraStrong commitment to delivering well-designed, well-implemented, and thoroughly tested software that meets internal and customer requirementsExperience developing software in a fast-paced Agile environmentStrong software development expertise in Python and/or C++Experience across the full software development lifecycle, including design, implementation, testing, deployment, monitoring, and maintenanceBachelor’s degree in Computer Science, Robotics, Engineering, or a related field with 5+ years of professional software development experience; or a master’s degree with 3+ years of experienceExperience with robotics, industrial automation, or robotic material-handling systemsExperience with asynchronous or concurrent programming, including Python Asyncio or similar frameworksExperience with parallel or distributed software systemsExperience with software-based simulation tools and techniquesExperience with messaging and communication technologies such as Kafka, gRPC, or similar systemsExperience with ROS or ROS2Familiarity with warehouse automation, logistics, package handling, or trailer-unloading applicationsExperience integrating software with sensors, actuators, programmable logic controllers, or other industrial hardware #J-18808-Ljbffr

Reporting to the Senior Expert Engineer, you design, develop, and maintain the electrical, electronic and power systems that drive Powervamp’s GSE product range. You work across the full development cycle — from architectural design through hands‑on testing to production deployment — in close collaboration with hardware designers and a multidisciplinary engineering team. Your mission: deliver high quality, accurate, and well‑documented integration of hardware with control systems that meet the demanding performance and safety requirements of the aviation ground support environment. • Equipment Design: Develop and update electrical schematics, wiring diagrams, and component layouts for GSE using CAD software (e.g., SEE Electrical)., • System Integration: Integrate electrical components into mechanical systems, designing robust electrical harnesses and cable assemblies., • Testing & Validation: Develop test procedures and execute tests, analyse data, and troubleshoot faults to certify operational reliability., • Compliance & Safety: Ensure all electrical designs comply with applicable standards and safety regulations., • Documentation: Prepare comprehensive technical reports, Bills of Materials (BOMs), operating manuals, and maintenance schedules., • Cross-Functional Collaboration: Partner with mechanical engineers, software developers, manufacturing teams, and suppliers to drive project delivery., • Schematic Capture: Design electronic circuit schematics and optimize board layouts for performance and manufacturability., • Integration: Connect sensors, motors, and drives to PLCs, and design Human Machine Interfaces (HMIs) for operators., • Technical: Proficiency in schematic capture, PLC control systems, and low/high voltage systems., • Bachelor’s degree (BEng/BSc) or HND/HNC in Electrical or Electronic Engineering., • 3+ years of experience in electrical engineering in a manufacturing environment — ideally in heavy equipment, industrial systems, or aviation ground support., • Hands on approach – comfortable supporting prototype builds, capturing information and transferring to CAD., • Strong understanding of power distribution, low voltage systems, PLCs, and motor controls., • Experience with Controller Area Network (CAN) communication protocol and systems., • Methodical, detail-oriented approach to problem-solving: you read signal traces, isolate root causes, and document your findings clearly., • Good communicator and team player — comfortable contributing to cross-functional technical reviews and working alongside hardware and mechanical engineers., • Field and product focus: you think beyond the bench — aware of how your system behaves in real-world aviation service conditions and what that means for reliability, safety, and aftermarket support., • Adaptability: comfortable switching between new product development and legacy maintenance, schematic and harness support tasks, without losing sight of your delivery commitments., • Proactive and outcome-driven, with a sense of initiative and a continuous improvement mindset. You report to the Senior Expert Engineer at Powervamp, Kempston, and work as part of a multidisciplinary engineering team spanning embedded, electrical, and mechanical disciplines. You collaborate closely with hardware designers, PCB developers, and product engineers — as well as with TLD engineering teams worldwide. Hierarchy at TLD is short and accessible: your technical contributions shape how our products perform in the field, and the path from hands‑on engineering to broader technical ownership is open to those who deliver. TLD Powervamp is a business in full growth: new products are being developed, zero-emission GSE demand is accelerating, and the firmware you write will control ground power units trusted by airlines and airports in 60+ countries. You will work across the full embedded stack — from bare-metal C on Microchip and STM32 microcontrollers to 400 Hz frequency converters and 28 V DC battery management systems — in an environment where technical depth is valued, hardware curiosity is rewarded, and international exposure comes with the role. At TLD, hierarchy is short: your voice carries weight. If you are energised by embedded challenge, hardware-software co-design, and a real contribution to the decarbonisation of aviation ground support — we’d love to hear from you. What if the products you engineer today powered aircraft at airports in 60+ countries tomorrow? At TLD Powervamp , a business in full growth and the aviation industry’s pioneer in zero-emission ground power, you will own a full product lifecycle as Product Line Engineer: from first concept to production at scale, and from our Bedford site to ramps worldwide. Join our Engineering team and shape the next generation of electric, eco-friendly Ground Support Equipment. • Télétravail, • 13ème mois, • Horaires flexibles #J-18808-Ljbffr

Leads the development and execution strategy for software testing, software qualification as well as test automation. Manages a technical team consisting of software developers as well as software testers. • Drives the test strategy aligned with Werfen’s Design Controls., • Collaborates with the software leadership team to define an overall qualification strategy., • Provides software technical leadership on Software Test Automation Center of Excellence., • Drives the proliferation of continuous integration testing., • Collaborates with peers to define and evolve software qualification processes (including test creation, traceability, automated DHF artifact creation, i.e., verification structure report), • Owns Software Test Automation frameworks and design supported by Test Automation Architect., • Supports Software development team in evaluation and investigation, of software defects., • Provides level of effort for assigned software testing activities; tracks personal estimates over time to improve accuracy, • People Management – Career planning, performance management, staffing, • Follows project and corporate software plans, standards, and procedures to perform software testing and test automation. This includes participating in requirements review, automation framework design, test case reviews, and team meetings., • Estalish best practices and key principals pertaining to testing/verification and test automation., • Software Development, • System Engineering, • Hardware Engineering, • Program Management, • Any other based on departmental, • Bachelor's Degree in Computer Science/ Engineering plus a minimum of 10 years of related experience or Master's Degree plus a minimum of 8 years of related experience or waiver based on experience., • Software Testing Domain expertise, • Expertise in Design Controls preferably in Medical device domain, • Test Metrics - Code Coverage, Requirements Coverage, Defect Leakage, • 10+ years' Test and Test Automation related software engineering experience and a hands-on Technical Lead with proficiency in Python, C++, PyTest Framework, UI Test Automation framework like Squish, • Test Automation - Unit Testing, Integration Testing, Component Testing, API testing, End-to-end Testing, • Non-functional testing approach and methods, • Experience in testing Embedded Software including Firmware with relevant automation frameworks, • Experienced Engineer skilled in Functional and Technical Coaching with hands-on coaching experience, • Ability to operate instrumentation., • Possesses strong written and oral communications skills., • Ability to work in a team environment of software developers and testers., • Experience testing complex systems., • < 5%of the time, • Planning and supporting the development of individuals’ knowledge, skills, and abilities so that they can fulfill current or future job responsibilities more effectively., • Ensuring that the internal or external customer’s perspective is a driving force behind strategic priorities, business decisions, organizational processes, and individual activities; crafting and implementing service practices that meet customers’ and own organization’s needs; promoting and operationalizing customer service as a value., • Identifying and understanding problems and opportunities by gathering, analyzing, and interpreting quantitative and qualitative information; choosing the best course of action by establishing clear decision criteria, generating and evaluating alternatives, and making timely decisions; taking action that is consistent with available facts and constraints and optimizes probable consequences., • Setting high goals for personal and group accomplishment; using measurement methods to monitor progress toward goals; tenaciously working to meet or exceed goals while deriving satisfaction from that achievement and continuous improvement., • Creating an environment (culture) that inspires people to generate novel solutions with measurable value for existing and potential customers (internal or external); encouraging experimentation with new ways to solve work problems and seize opportunities that result in unique and differentiated solutions., • Establishing and sustaining trusting relationships by accurately perceiving and interpreting own and others’ emotions and behavior; leveraging insights to effectively manage own responses so that one’s behavior matches one’s values and delivers intended results. Effectively carries out the expectations of Werfen People Managers as defined in Werfen’s Role of the Manager program. Among others this includes maintaining regular, at minimum once a month, and transparent communication with the team through effective use of formal one-on-one meetings with direct reports and team meets. Managing performance issues and conflict proactively; uses judgement in consulting with department leadership and Human Resources. Responsibility for the team´s compliance in terms of training, and fulfilment of their tasks and objectives as well as onboarding of new employees and development of the existing team. • < 5%of the time The annual base salary range for this role is currently $K to $K range. Individual employee compensation will ultimately depend on factors including education, relevant experience, skillset, knowledge, and particular business needs. This role is eligible for medical, dental, and vision insurance, k plan retirement benefits with an employer match, as well as paid vacation and sick leave. Our sales roles are eligible for participation in a commission plan and our management, and select professional roles, are eligible for a performance-based bonus. Werfen is an Equal Opportunity employer and is committed to a diverse workplace. Werfen strictly prohibits unlawful discrimination, harassment or retaliation based upon an individual’s race, color, religion, gender, sexual orientation, gender identity/expression, national origin/ancestry, age, mental/physical disability, medical condition, marital status, veteran status, or any other protected characteristic as defined by applicable state or federal law. If you have a disability and need an accommodation in relation to the online application process, please contact for assistance. We operate directly in over 30 countries, and in more than territories through distributors. Annual revenue is approximately $2 billion and more than 7, employees around the world comprise our Werfen #J-18808-Ljbffr

What if the firmware you write today controlled power delivery to aircraft at airports in 60+ countries tomorrow? At TLD Powervamp, a business in full growth and the aviation industry’s pioneer in zero-emission ground power, you will shape the embedded intelligence at the heart of our GSE products : from initial prototyping to production at scale, and from our Kempston site to ramps worldwide. Join our Engineering team and build the firmware that drives the next generation of electric, eco-friendly Ground Support Equipment. Reporting to the Senior Expert Engineer, you design, develop, and validate the embedded software and firmware that drives Powervamp’s GSE product range. You work across the full development cycle — from architectural design through hands‑on testing to production deployment — in close collaboration with hardware designers and a multidisciplinary engineering team. Your mission: deliver robust, reliable, and well‑documented embedded systems that meet the demanding performance and safety requirements of the aviation ground support environment. Concretely, you will: • Design, develop, and validate firmware: code, test, and debug system software and firmware in embedded systems; troubleshoot hardware/software interactions from signal level to system behaviour to ensure correct and robust operation in the field., • Drive software architecture: participate in architectural design decisions and contribute to technical specifications and design reviews that define how our products behave on the ramp., • Optimise and maintain code quality: analyse and refactor new and existing codebases for performance, reliability, and maintainability; apply structured code management and peer review workflows using version control tools., • Perform hands‑on testing and debugging: validate embedded systems with industry‑standard instruments including oscilloscopes and logic analysers; ensure your code meets functional and reliability requirements before it reaches a live airport environment., • Support hardware development: assist with PCB layout, design, and validation; contribute to Electrical CAD drawings including cable harness drawings; participate in electronic component selection and validation — bridging firmware and the hardware it runs on., • Accelerate new product introduction: support the transition from prototype to production; maintain clear and comprehensive technical documentation for code and system architecture to enable seamless handover and long‑term maintainability., • Bachelor’s degree (BEng/BSc) in Electrical Engineering or Computer Science., • Solid embedded C experience, ideally on Microchip 16- and 32-bit devices; experience with STM32/ARM platforms is a strong advantage., • Hands‑on experience with embedded debugging tools: oscilloscopes, logic analysers, and similar instruments., • Electrical and electronic design background; PCB development experience (e.g. Altium Designer) is advantageous., • Familiarity with version control systems (Git/GitHub/GitLab) and structured software configuration management practices., • Methodical, detail‑oriented approach to problem‑solving: you read signal traces, isolate root causes, and document your findings clearly., • Good communicator and team player — comfortable contributing to cross‑functional technical reviews and working alongside hardware and mechanical engineers., • Field and product focus: you think beyond the bench — aware of how your firmware behaves in real‑world aviation service conditions and what that means for reliability, safety, and aftermarket support., • Adaptability: comfortable switching between new product development and legacy code maintenance, firmware and hardware support tasks, without losing sight of your delivery commitments., • Proactive and outcome‑driven, with a sense of initiative and a continuous improvement mindset. You report to the Senior Expert Engineer at Powervamp, Kempston, and work as part of a multidisciplinary engineering team spanning embedded, electrical, and mechanical disciplines. You collaborate closely with hardware designers, PCB developers, and product engineers — as well as with TLD engineering teams worldwide. Hierarchy at TLD is short and accessible: your technical contributions shape how our products perform in the field, and the path from hands‑on engineering to broader technical ownership is open to those who deliver. TLD Powervamp is a business in full growth: new products are being developed, zero‑emission GSE demand is accelerating, and the firmware you write will control ground power units trusted by airlines and airports in 60+ countries. You will work across the full embedded stack — from bare‑metal C on Microchip and STM32 microcontrollers to 400 Hz frequency converters and 28 V DC battery management systems — in an environment where technical depth is valued, hardware curiosity is rewarded, and international exposure comes with the role. At TLD, hierarchy is short: your voice carries weight. If you are energised by embedded challenge, hardware‑software co‑design, and a real contribution to the decarbonisation of aviation ground support — we’d love to hear from you. #J-18808-Ljbffr

Lexington Medical, Inc.is a medical device company developing and manufacturing minimally invasive surgical stapling solutions in the Boston area. With the highest standards in design engineering and smart manufacturing, our team delivers disruptive technology to healthcare providers, improving surgical outcomes for patients in a thriving $6B+ surgical stapler market. Rooted in a talent-dense culture, we are committed to innovation, foster continuous growth, and achieve great heights together. At Lexington Medical, Inc., you will have the opportunity to impact the lives of millions of patients worldwide and thrive in a fast-growing MedTech company. We are hiring an Embedded Software Engineer to join our R&D team at Lexington Medical, Inc. in Bedford, MA, near Boston. This role is designed for someone early in their career who has completed strong internships or co-ops working on embedded firmware, robotics, or electromechanical systems and is excited to continue building real hardware-driven products. In this role, you will contribute to the development, testing, and integration of embedded firmware within our advanced surgical stapling platform. You will work closely with embedded, electrical, mechanical, and systems engineers, gaining hands‑on exposure to microcontroller-based systems, hardware bring‑up, and real‑world debugging in a regulated medical device environment. This is a hands‑on engineering role focused on firmware that interacts directly with motors, sensors, and physical mechanisms. • Contribute to the design, implementation, and testing of embedded firmware running on ARM Cortex-M or equivalent microcontroller-based systems using C and C++., • Assist with the development and integration of low‑level drivers and communication interfaces, including SPI, I²C, CAN, UART, and USB, along with application‑layer logic that controls and monitors electromechanical systems., • Work closely with electrical and mechanical engineers to support hardware bring‑up, debugging, and system integration, ensuring firmware interacts correctly with motors, sensors, and other physical components., • Participate in code reviews and design discussions, learning best practices for modular, maintainable firmware design., • Contribute to improving firmware quality, reliability, and traceability over time., • Support verification and validation activities through bench testing and system‑level testing., • Assist with documenting software requirements, design decisions, and test results in alignment with FDA and IEC 62304 expectations., • Bachelor’s or Master’s degree in Computer Science, Electrical Engineering, Computer Engineering, Robotics, or a related discipline., • 1+ years of relevant experience, including internships or co‑ops with significant hands‑on embedded or hardware‑focused work., • Experience writing and debugging embedded C or C++ code., • Comfort working with microcontrollers, hardware‑level debugging tools, and lab equipment., • Exposure to real‑time or bare‑metal embedded systems., • Familiarity with communication protocols such as SPI, I²C, UART, or CAN., • Hands‑on experience with robotics, motor control, sensors, or electromechanical systems through internships, academic projects, or personal projects. Lexington Medical, Inc. is a surgical stapling company based in Bedford, MA, developing smart surgical technology for minimally invasive procedures. We’re hiring top engineers and medical device sales professionals to help us grow and improve outcomes for patients worldwide. Visit our Candidate Journey page to learn what to expect from our hiring process. $80,000—$110,000 USD #J-18808-Ljbffr

Do you have EMC awareness at product and circuit level? Do you hold a formal electrical qualification such as HNC, HND, BEng, etc.? Do you want ot work with an industry-leading company? If your answer to these is yes, then this could be the role for you! As the Lead Electrical Engineer, you will be working alongside a market-leading Defence and Aerospace company who are constantly growing and developing. They are always looking to bring on new talents such as yourself and further develop your skills to enable you to grow within the company and industry. • Take responsibility for the design, development, and support of mixed electrical/electronic solutions from concept to completion following a detailed phase-gate development process, • Define processes, specifications, and procedures that support the design and manufacture of the Electrical hardware, • Provide technical review of supplier capabilities to facilitate source selection, • Facilitate the development of functional and physical design requirements to ensure complete integrated design architecture, • Design and development of electrical circuitry (includes; power electronics, harnesses, 28V high current systems), • Analysis, test, and evaluation of Electrical circuits and components, • Electrical circuit protection analysis, • The ability to produce technical documentation to support all activities, from trade studies, requirements documentation, compliance evidence, and test documentation, • Strong team player with good written and verbal communication skills, • Formal Electrical qualification such as HNC/HND/BEng, • Experience of Electrical Hardware Design & Electrical Product Development for Harsh Environments, • Electrical analysis of derating, stress, and tolerance, • Experience of software tools (e.g. Zuken, Harnware), • EMC Awareness at product and circuit level, • Awareness of Def-Stan/Mil Standards, Safety, and Quality processes, • Ability to support and manage aspects of Assembly, Integration, and Test, • Experience of working with lab test equipment, e.g. debug of Electrical circuits, • Experience of Windchill or other Product Lifecycle Management tools #J-18808-Ljbffr

Job ID: 60917Location: Bedford, BedfordshireType: ContractSalary: GBP 50000.00 - 60000.00 Per Annum per yearPosted: 2026-10-21Company: Get Staffed Online RecruitmentSenior Mechanical EngineerBedford, UK Hybrid Working£50,000 – £60,000 + Bonus + BenefitsWe are looking for an experienced and innovative Senior Mechanical Engineer to help develop the next generation of fertility and pregnancy products. Based in Bedford, you will play a key role in product development from concept through to manufacture and launch, working within a multidisciplinary R&D team.This is an exciting opportunity for an Engineer who enjoys solving technical challenges, driving innovation and contributing to products that positively impact people's lives.About SPDSwiss Precision Diagnostics (SPD) is a global leader in consumer diagnostics and the joint venture between Procter and Gamble (P&G) and Abbott. Our Clearblue brand is recognised worldwide for accurate home pregnancy and fertility monitoring products.The RoleAs a Senior Mechanical Engineer, you will provide technical leadership across the full product lifecycle, from concept development and prototyping through to manufacture and product launch. You will work closely with cross-functional teams and external partners to develop robust, manufacturable designs while ensuring compliance with quality and regulatory standards.You will also support process engineering activities, helping transfer new products into manufacturing and drive continuous improvement initiatives.Key ResponsibilitiesMechanical Engineering:Lead the resolution of complex mechanical engineering challenges.Develop innovative product designs using DFM and DFA principles.Produce and maintain technical documentation, specifications and reports.Lead risk management activities including Risk Assessments and FMEA.Plan and oversee testing and validation activities.Collaborate with external suppliers and manufacturing partners, including those in China.Design and manufacture jigs, fixtures and test equipment.Develop scalable prototype assembly and manufacturing processes.Conduct engineering analyses including tolerance stack-ups and FEA.Create and maintain 3D CAD models and drawings using SolidWorks.Manage prototype and tooling development through suppliers.Support innovation and patent activities with IP specialists.Process Engineering:Design and improve manufacturing processes for safety, quality and cost efficiency.Lead continuous improvement projects using Six Sigma methodologies.Produce manufacturing documentation and work instructions.Support Design Transfer and new product introduction activities.Investigate manufacturing issues using root cause analysis and CAPA.Support process validation, equipment validation and production scale-up.About YouEssential:Degree in Mechanical Engineering or a related discipline.5+ years' experience in a manufacturing or engineering environment.Experience in product development, design transfer and manufacturing / process engineering.Experience working within regulated industries, ideally medical devices or diagnostics.Knowledge of ISO 13485, IVDR and FDA requirements.Strong analytical skills including tolerance analysis and FEA.Proficiency in 3D CAD software, ideally SolidWorks.Excellent communication and technical reporting skills.Ability to manage multiple priorities in a fast-paced environment.Desirable:Medical device or diagnostics product development experience.Knowledge of process and equipment validation.Experience applying DFM and DFA principles.Understanding of DoE, Six Sigma and continuous improvement tools.Experience supporting manufacturing optimisation and regulatory compliance.What You'll Bring:Proactive problem-solving approach.Strong leadership and stakeholder management skills.Ability to influence technical decisions and deliver results.Passion for innovation and engineering excellence.Additional Information:International travel required several times per year.What We Offer:Hybrid working (3 days on site, 2 from home)25 days annual leave plus bank holidaysCompetitive pension schemePrivate Medical Insurance and medical cash planEnhanced maternity and paternity payHealth and Wellbeing programmeLife assuranceFree electric vehicle chargingAttractive parkland location with excellent links to Cambridge, Milton Keynes and LondonInterested?Click apply and you will be redirected to our careers page to complete your application.

We’re growing our team and looking for a Senior Software Test Engineer to play a key role in delivering assured software across complex, mission‑critical systems. Ability to produce clear, structured and traceable test artefacts, including test design documentation, test cases, execution records

Understanding software design and architecture, including defining software test bed requirements. You'll be responsible for the end-to-end software testing and proving lifecycle for one or more products within software simulation and emulation environments. ISTQB or another relevant software testin

I am working with a client searching for a Software Engineer in Test that will be based remotely, but working with an existing Engineering Team. If you are interested in applying for the position as Software Engineer in Test, or would like more information, please get in touch with Josh on. Degree i

Sony Interactive Entertainment is seeking an experienced Software Test Engineer in the United Kingdom to develop and automate tests for PlayStation software. Required are 5+ years of software testing experience, strong C# skills, understanding of C++, and CI workflows. You will craft test strategies

In this Software Engineer role you ll support software and test design processes; ensuring DFT principles are applied whilst ensuring readiness for build and scale as well as implementing robust processes for firmware programming in production builds. This award-winning company, enjoying sustained g

Modis International Ltd in Bristol is seeking a Software Engineer Ada, Integration & Test Engineer on a long-term contract. You will contribute to Ada code development, verification, and software V&V using target equipment and simulations of missile subsystems. The role emphasizes integration testin

As Engineering Manager in the Storage Engineering Team, you will lead a team building scalable, reliable cloud storage for Linode within Akamai’s Connected Cloud. You’ll drive design, testing strategy, and sprint planning to ensure high-quality, production-ready storage solutions. Lead and devel

Our client, a cutting‑edge fintech business, is looking for a Software Development Engineer in Test (Java SDET) to strengthen their automated testing framework and drive software quality to the highest standards. Java Software Development Engineer in Test – FinTech – Java. Component testing, e

Leonardo UK in Luton is seeking a Software Test Engineer to support its Defence projects. The role welcomes candidates from diverse backgrounds and offers development within a community of world-class engineers, focusing on testing embedded systems or Windows apps with agile practices.

We’re looking for a Senior Software Test Engineer to play a key role in delivering assured software across complex, mission‑critical systems. Ability to produce clear, structured and traceable test artefacts, including test design documentation, test cases, execution records and release document

Senior Test Automation Engineer (SDET) | Up to £80,000 | Hybrid - Basildon. Here at Burns Sheehan, we're working with a leading automotive and financial services organisation modernising their test automation strategy across UK engineering teams. Senior Test Automation Engineer (SDET).

Technical Futures Ltd is seeking a Degree qualified Software Engineer with strong C# experience to join the NPI team and support the software-driven automation and test aspects of transitioning products from development into scalable manufacturing. You will develop tools for production test, work wi

Rowden in Bristol is seeking a Senior Software Test Engineer to own software quality across diverse, mission‑critical projects. Your role spans automated testing with Playwright, PyTest and UI Automator, plus scripting in Python/Bash/PowerShell to deliver robust, traceable artefacts and evidence f