Test engineer jobs in DerbyCreate job alerts

Description The Security Enterprise Solutions (SES) Operation is the cornerstone of Leidos’ comprehensive suite of fully integrated security solutions for aviation, ports, borders, and critical infrastructure customers around the world. With our new, combined portfolio, our operation has more than 24,000 products deployed across 120 countries. Leveraging this portfolio, our core technical strengths, and robust R&D initiatives, we are positioned to address emerging and evolving threats through rapid development of innovative solutions for our global customers. SES is comprised of three divisions to align with our customers’ missions and needs: • Aviation Solutions, • Ports & Borders, • Global Services Summary The Installation Integration Engineer must be a self-starter who is team oriented and focused on delivering the highest level of service excellence to Leidos customers. Responsible for providing effective, efficient, and compliant on-site technical and customer support for installation of systems at assigned airports, as determined by Leidos needs. Will install, commission, diagnose, troubleshoot, repair, and test a variety of complex X-ray or CT based electronic and electromechanical equipment, which may include computer and networking systems. Many of the systems are integrated into a larger airport systems environment including complex baggage handling systems. System types include the following but not limited to: • Check point CT systems., • Checkpoint x-ray systems., • Explosive Detection Systems (EDS), • Automatic tray return systems (ATRS), • Explosive trace detection systems (ETD), • Millimeter wave technology passenger screening (MMW). Will follow standard protocol, procedures and identified best practices to isolate and resolve problems in malfunctioning equipment or software. The position requires the ability to work independently with limited supervision. Successful applicants will have a certified trade training, with stong experience in troubleshooting and repair of; x-ray computed tomography systems, electro - mechanical equipment, PLC control systems. Please note that a 5-year UK reference period is required to obtain airside passes. Primary Responsibilities: • Responsible for providing technical and customer support for installation projects., • Install, maintain, troubleshoot/diagnose, repair, and test a wide variety of airport passenger and baggage security systems., • Perform scheduled and unscheduled Corrective Maintenance, Preventive Maintenance, and radiation surveys., • Maintain calibration on all test and radiation survey equipment., • Provide customer training assistance of installed systems and equipment., • Adhere to Leidos published maintenance and radiation survey checklists and procedures., • Report design, reliability, and system bugs to technical support., • Follow down machine escalation protocol to ensure time resolution of system failures., • Prepare RMA repairable/returnable parts for shipment and return to identified defective location. Complete all RMA paperwork and reporting requirements., • Exercise judgment within broadly defined policies and procedures in selecting methods, techniques, and evaluation criterion for obtaining results., • Assume responsibility for continued customer satisfaction and coordinate all activities with the customer; assist with customer training while representing Leidos in a professional manner., • Must be highly proficient in reporting activities, maintaining local spare parts inventory, recording travel expenses and timecard, implementing Tech Bulletins (TB’s) and using good judgment when dealing with customers., • Comply with all safety requirements and all required training, following the guidance provided in Leidos policies, procedures, manuals, and TB’s., • Comply with use of Personal Protective Equipment (PPE) where and when applicable., • Apply Lock Out – Tag Out (LOTO), following safe lifting practices and same day reporting of any accidents, near misses and unsafe conditions., • Demonstrates a pro-active approach towards safety, health, and quality in compliance with all customer facility and Leidos company guidelines and regulations., • Maintain tools and test equipment properly., • Participate in on-going product training and maintain all necessary certifications., • Provides daily written reporting on completed maintenance activities, used parts and consumables, machine faults, down times, and availability., • Responds to faults timely as per contracted response, repair times and endeavors best efforts to keep KPIs, and SLAs of the contract., • Keeps track of used parts as per procedures provides by Service Supervisor, returns the parts with RMA process., • Reports performance and availability of the machines as advised by Service Supervisor, • Identifies the Root Cause of repetitive parts failures and investigates for corrective actions to minimize parts consumption., • Solid relevant Installation Integration Engineer experience, preferably in an integrated systems technologies environment., • Experience maintaining and supporting large, complex, electromechanical systems., • Experience working with High-Voltage Equipment., • Good customer skills and the ability to work under pressure., • Must be self-starter, work well without supervision, and accept responsibility., • Must be adaptable and willing to accept changing shifts and job requirements determined by business and customer needs., • Must be able to travel both domestic and international locations., • Must be willing to work on-call and off-shift as assigned and requested by manager or supervisor., • Maintain professional appearance as prescribed by the Company., • Must work well without supervision and accept responsibility for timely completion of assigned work., • The candidate must be able to lift/carry a minimum of 25 kgs., • The candidate must be able to push/pull 90kgs.bs, • Must be able to work and freely navigate in the baggage area of the airport, where vertical ladders, crossovers, and low overhead ceilings frequently occur., • A degree in electronics technology, mechanical or electrical engineering or equivalent., • Prior experience in X-ray or computed tomography technologies, especially in the airport security environment, is a significant plus., • Working knowledge of Linux and Unix. At Leidos we are PASSIONATE about customer success, UNITED as a team and INSPIRED to make a difference. We offer meaningful and engaging careers, a collaborative culture, and support for your career goals, all while nurturing a healthy work-life balance. We provide an employment package that attracts, develops, and retains only the best in talent. Our reward scheme includes: • Contributory Pension Scheme, • Private Medical Insurance, • Generous Annual Leave (including public and privilege holidays) For U.S. Positions: While subject to change based on business needs, Leidos reasonably anticipates that this job requisition will remain open for at least 3 days with an anticipated close date of no earlier than 3 days after the original posting date as listed above. The Leidos pay range for this job level is a general guideline only and not a guarantee of compensation or salary. Additional factors considered in extending an offer include (but are not limited to) responsibilities of the job, education, experience, knowledge, skills, and abilities, as well as internal equity, alignment with market data, applicable bargaining agreement (if any), or other law. #Remote

Job Description Technical Integration Engineer Full Time Derby - (requires regular travel to remote sites in Cumbria and Caithness)/Hybrid Working The Irradiated Fuel Management (IFM) Engineering team is responsible for ensuring that the Post Irradiation Examination (PIE) requirements that underpin core through life safety cases are met, keeping Submarines at sea. We work collaboratively primarily with the UK National Nuclear Laboratory (UKNNL) in Cumbria and the Naval Reactor Test Establishment in Caithness to develop techniques as required and ensure the quality of this crucial data which underpins fleet operations. Your role as an integration engineer will be to work alongside our project team and technical leads within the supply chain to develop and support the application of techniques during the PIE campaigns, in the short term for current class and for future products. This position provides an ideal opportunity to develop your collaboration skills through internal and external interfacing and develop a technical understanding of core validation approaches and provides visibility across the business and the MoD. Why Rolls-Royce? Rolls-Royce is one of the most enduring and iconic brands in the world and has been at the forefront of innovation for over a century. We design, build and service systems that provide critical power to customers where safety and reliability are paramount. We are proud to be a force for progress, powering, protecting and connecting people everywhere. We want to ensure that the excellence and ingenuity that has shaped our history continues into our future, and we need people like you to come and join us on this journey. This role is part of the Rolls-Royce Defence sector within the Submarines business that support the Royal Navy Nuclear Submarines fleet. We'll provide an environment of caring and belonging where you can be yourself. An inclusive, innovative culture that invests in you, gives you access to an incredible breadth and depth of opportunities where you can grow your career and make a difference. This role provides a great opportunity to work with key suppliers, a broad range of internal and external technical communities and visibility with the Ministry of Defence customer project and technical areas. What we offer We offer excellent development opportunities, a competitive salary, and exceptional benefits. These include bonus, employee support assistance and employee discounts. Your needs are as unique as you are. Hybrid working is a way in which our people can balance their time between the office, home, or another remote location. It's a locally managed and flexed informal discretionary arrangement. As a minimum we're all expected to attend the workplace for collaboration and other specific reasons, on average three days per week. What you will be doing Within this opportunity you will have the chance to pursue and be responsible for: Providing on-site (Cumbria & Caithness) support for deployment and operations of PIE equipment to gather data required for core validation Development of Post Irradiation Examination inspection capabilities and processes in collaboration with suppliers Contribute/Lead activities to improve and drive delivery of the PIE campaigns Assisting in the ongoing development of primary supplier UKNNL capability Providing guidance to internal and external project and technical teams to ensure that we deliver the PIE data required to support operation of the Submarines fleet Who we're looking for: At Rolls-Royce we put safety first, do the right thing, keep it simple and make a difference. These principles form the behaviours that guide us and are an essential component of our assessment process. They are the fundamental qualities that we seek for all roles. To be successful in this role you will need to: Be a team player who is committed to work collaboratively with suppliers and customers (internally and externally). A high degree of flexibility and willingness to provide support at remote locations, working independently as required and internally to assist with work packages outside of the IFM team as required. Someone who is comfortable representing the IFM team, can challenge as appropriate and work across business units and functions. A problem-solving attitude and a desire to improve processes and techniques both internally and in the supply chain. A degree in an engineering or scientific discipline is preferred but not essential. Experience and understanding of PWR/Submarine core components, design, and manufacture are highly desirable but not essential. We are an equal opportunities employer. We're committed to developing a diverse workforce and an inclusive working environment. We believe that people from different backgrounds and cultures give us different perspectives which are crucial to innovation and problem solving. We believe the more diverse perspectives we have, the more successful we'll be. By building a culture of caring and belonging, we give everyone who works here the opportunity to realise their full potential. You can learn more about our global Inclusion strategy at Our people | Rolls-Royce Job Category Engineering for Services Posting Date 07 Oct 2025; 00:10 Posting End Date 20 Oct 2025PandoLogic. , Location: Derby, ENG - DE23 8NX

Job Description Development Engineer Full Time Derby/Hybrid Why Rolls-Royce? At Rolls-Royce we are proud to be a business that has truly helped to shape the modern world and are committed to always being a force for progress; powering, protecting and connecting people everywhere. By joining Rolls-Royce, you'll have the opportunity to work on world-class solutions, supported by a culture that believes individuality is our greatest strength, and all perspectives, experiences and backgrounds help us innovate and enable our high-performance culture. The role of a Development Engineer is to define and execute verification strategies to certify and verify new products or to standardise modifications to existing products. The role will report to the Chief Development Engineer. The Development Engineer is responsible for ensuring that Rolls-Royce has sufficient oversight for our products to meet business, customer and regulatory requirements. Working on Civil Large Engines and future products, the Development Engineer role is fast paced with high reward to enable robust delivery of product verification and validation. This is an integration role where the individual will work to enable all engineering teams through coaching and support to successfully develop robust, verified engineering solutions against robust validated customer requirements. What you will be doing: You will be allocated hardware or systems to "own", being an active member of the associated engineering teams to integrate requirements within the product development programme. Compile and maintain verification strategies to ensure all authority, customer and internal requirements are met. Work with specialist areas and other development teams to define experiments, instrumentation, and hardware provisioning to meet the requirements of yours and other verification strategies that are affordable and executable within the engine development programme Work with the programme execution team and other teams to provision, order, specify, maintain, strip and sentence appropriate compatible hardware (including spares and experimental variations)Support the timely execution of the engine development programme Define test schedules with specialist, functional and other development teams to ensure your test can be successfully integrated and executed within an engines test sequence; and support those tests ensuring the resulting data is in line with specialist's requirements to fulfil the verification requirement Actively seek out, record and manage problems to resolution for your hardware, systems or subject area.Write Flight Clearance, Standardisation and Certification Reports documenting verification and compliance evidence in line with relevant verification strategy Position qualifications and requirements: Degree level in Engineering or Science or equivalentExperience in relevant domain is preferred but not essentialGood communication, presentation skills and an ability to work in a multidisciplinary environment We offer excellent development, a competitive salary and exceptional benefits. These include bonus, employee support assistance and employee discounts. Hybrid working is a way in which our people can balance their time between the office, home or another remote location. It's a locally managed and flexed informal discretionary arrangement. As a minimum we're all expected to attend the workplace for collaboration and other specific reasons, frequency will depend on business needs, nature of role, what works for the team and for the individual. Discover more on our GBS Service Portal about hybrid working. Our vision is to ensure that the excellence and ingenuity that shaped our history continues into our future. Our multi-year transformation programme aims to turn Rolls-Royce into a high-performing, competitive, resilient and growing company. Join us, and it can be your future vision too. Rolls-Royce are committed to being a respectful, inclusive, and non-discriminatory workplace where individuality is valued, diverse perspectives fuel innovation, and everyone can thrive. Closing Date: 22nd October 2025 Job Category Validation and Verification Posting Date 09 Oct 2025; 00:10 Posting End Date 22 Oct 2025PandoLogic. Keywords: Engine Engineer, Location: Derby, ENG - DE23 8NX

Job Description Fluid System Design Engineer - Test Rig Design (Submarines) Full Time Derby Fluid System Design Engineers to undertake rig design to support both Verification and Validation (V&V) and production testing of Nuclear Steam Raising Plant components. The role involves working as part of Integrated Project Teams to design new and modify existing multi-million-pound test rig designs, the bulk of which are in our Test Laboratory at our main offices at Raynesway in Derby Why Rolls-Royce? Rolls-Royce is one of the most enduring and iconic brands in the world and has been at the forefront of innovation for over a century. We design, build and service systems that provide critical power to customers where safety and reliability are paramount. We are proud to be a force for progress, powering, protecting and connecting people everywhere. We want to ensure that the excellence and ingenuity that has shaped our history continues into our future and we need people like you to come and join us on this journey. Our nuclear business is a leader in propulsion system design and development for the Royal Navy's nuclear submarine fleet and the sole provider and technical authority, managing all aspects of plant design, safety, manufacture, performance, and through-life support. We'll provide an environment of caring and belonging where you can be yourself. An inclusive, innovative culture that invests in you, gives you access to an incredible breadth and depth of opportunities where you can grow your career and make a difference. Working in multi-discipline teams, with internal resource, external design partners and equipment suppliers you'll work with like-minded mechanical and electrical engineers and our facilities/operations team to develop the design intent for a range of different size rigs designed to deliver test data related to R&T, V&V, component qualification and through life performance requirements. What we offer: We offer excellent development opportunities, a competitive salary, and exceptional benefits. These include bonus, employee support assistance and employee discounts. Your needs are as unique as you are. Hybrid working is a way in which our people can balance their time between the office, home, or another remote location. It's a locally managed and flexed informal discretionary arrangement. As a minimum we're all expected to attend the workplace for collaboration and other specific reasons, on average three days per week. What you will be doing: Generating requirements, scoping work, and planning tasks in conjunction with stakeholders.Applying standard fluid flow and thermal hydraulic theory to inform and justify design decisions around system layout, component selection and sizing. Examples include:Creation of Pipework and Instrumentation Diagrams (P&ID), and the associated valve and equipment schedules.Pump, valve (inc.safety relief) and heat exchanger sizing and selection.Development of 1D system flow models, derivation of loss coefficients etc.Development of operating philosophies and high-level control system logic Who we're looking for: At Rolls-Royce we put safety first, do the right thing, keep it simple and make a difference. These principles form the behaviours that guide us and are an essential component of our assessment process. They are the fundamental qualities that we seek for all roles. Experience of design of process plant facilities, such as oil and gas pipework systems or chemical process facilities, is desirableExperience, where possible, in a relevant, heavily regulated industry, such as Chemical, Pharmaceutical, Energy, Water or Nuclear.Experience of specifying, designing, justifying, or operating complex fluid/chemical process systemsDegree (or equivalent) in mechanical engineering, chemical engineering, or another science or engineering discipline with thermo-fluids content.Track record of delivering solutions against specific customer requirements to time, cost, and quality.Sound knowledge of engineering principles, process safety, and applicable codes & standards. Understand of design process and design and safety assessment processes and tools e.g., HAZOP/HAZID/SWIFT/FMEAs etc.Desirable to have experience in the use of 1D flow modelling software (specifically FloMaster). We are an equal opportunities employer. We're committed to developing a diverse workforce and an inclusive working environment. We believe that people from different backgrounds and cultures give us different perspectives which are crucial to innovation and problem solving. We believe the more diverse perspectives we have, the more successful we'll be. By building a culture of caring and belonging, we give everyone who works here the opportunity to realise their full potential. You can learn more about our global Inclusion strategy at Our people | Rolls-Royce To work for the Rolls-Royce Submarines business an individual has to hold a Security Check clearance. Rolls-Royce will support the application for Security Clearance if you do not currently already have this in place. Due to the nature of work the business conducts and the protection of certain assets we can only progress applications from individuals who are a UK national or, in MoD approved cases, a dual national. Job Category Validation and Verification Posting Date 16 Oct 2025; 00:10 Posting End Date 23 Oct 2025PandoLogic. Keywords: Nuclear Design Engineer, Location: Derby, ENG - DE23 8NX

Job Description Control Systems Engineer - Submarines Full Time / Hybrid (3 Days in Office) Derby, UK As a Control Systems Engineer, you'll lead and drive from an architectural concept to a physical design. Support the concept development, detailed design, testing and verification whilst ensuring safety is always accounted for. The Controls Systems Engineer will contribute and participate in the development, planning, implementation and adherence of policies and procedures to ensure that the activities considered during the engineering life cycle of a system design are carried out in a consistent and appropriate manner. Why Rolls -Royce? Your role will be vital to the development of engineering and test capabilities. Working within a multi-discipline design team, you will design new production and experimental test facilities, reduce the incidence of costly breakdowns and develop with other's strategies to improve overall reliability and safety of plant, personnel and test processes. Work with us and we'll welcome you into a culture of caring and belonging where you can be yourself. We will listen first, embrace feedback and act with integrity. We will invest in your continuous learning and development, and make sure you have access to a wide breadth and depth of opportunities to grow your career and make a difference. We offer excellent development, a competitive salary and exceptional benefits. These include bonus, employee support assistance and employee discounts. Hybrid working is a way in which our people can balance their time between the office, home or another remote location. It's a locally managed and flexed informal discretionary arrangement. As a minimum we're all expected to attend the workplace for collaboration and other specific reasons, frequency will depend on business needs, nature of role, what works for the team and for the individual. Discover more on our GBS Service Portal about hybrid working. Responsibilities: The Controls Systems Engineer/PLC Engineer will play a vital role to design, specify for manufacture, test, commission, and support both bespoke and commercial off the shelf control system solutions. You'll review and agree high level functional and operational requirements including their testability. Your main responsibilities will include: Design and implement complex control system solutions to meet the high-level requirements, constraints or standards.Working in a cross-disciplinary environment to develop solutions for new production and experimental test facilities; understanding functional requirements and performance capabilities of the system to facilitate effective system design.Software Development: Write complex software modules from philosophy documents or transform obsolete control systems into modern, software-driven solutions.Hardware Design: Design in detail new hardware solutions from concept documents such as P&IDs, equipment schedule etc. for new installations as well as to replace outdated control systems or upgrade existing ones.Problem-Solving: Identify and rectify issues during software/hardware integration testing and support the commissioning team during equipment/software installation.Prepare technical reports and documentation to a standard compatible with engineering best practice.Be the technical support to the supply chain, including the assessment of electrical and control system components and design definition updates. Also undertake the project planning and control to ensure cost and schedule adherence. Who we are looking for: Ideally you should have carried out a similar role in the industrial sector and have experience of the requirements in the manufacturing facilities and/or nuclear sector. At Rolls-Royce we embrace agility, are bold, pursue collaboration and seek simplicity in everything we do. These principles form our values and behaviours and are an essential component of our assessment process and are fundamental qualities that we seek for all roles. Hands-on experience with industrial control systems applications and industrial IT/OT networks. Specific experience with Rockwell/Allen Bradley Control Systems is advantageous.Hands-on experience of specifying and designing control system hardware including familiarity with various I/O signal type interfaces with instrumentation.Working knowledge of change/configuration management tools and processes, as well as experience with IT tools and software for control system design such as AutoCAD Electrical and/or E-Plan.Ideally have experience with the Engineering Product/Project Lifecycle (Initial Requirements through to Disposal).Ideally have a broad understanding of relevant IEC standards used in control system design, such as Machinery Directive, BS7671 IET Wiring regulations, IEC 61131, IEC 61508/61511 etc.Proactive and self-starting individual who can work with various disciplines across different engineering functions.A degree or equivalent professional accreditation in an engineering discipline, preferably related to Controls, Electrical, Electronics, Instrumentation, or Software.Member of a professional engineering institution (e.g. The IET), and ideally working towards gaining Chartered status. We are an equal opportunities employer. We're committed to developing a diverse workforce and an inclusive working environment. We believe that people from different backgrounds and cultures give us different perspectives. And the more perspectives we have, the more successful we'll be. By building a culture of respect and appreciation, we give everyone who works here the opportunity to realise their full potential. Learn more about our global Inclusion Strategy To work for the Rolls-Royce Submarines business an individual has to hold a Security Check clearance. Rolls-Royce will support the application for Security Clearance if you do not currently already have this in place. Due to the nature of work the business conducts and the protection of certain assets we can only progress applications from individuals who are a UK national or, in MoD approved cases, a dual national. #LI-MM1 Job Category Electrical and Electronics Posting Date 13 Oct 2025; 00:10 Posting End Date 20 Oct 2025PandoLogic. Keywords: Control Systems Engineer, Location: Derby, ENG - DE23 8NX

Job Description Systems and Verification Section Lead - Future Product - Submarines Full Time Derby Why Rolls-Royce? An exciting opportunity for a Development and Verification Engineer role in the Future Products Team has arisen within Nuclear (Submarines). We're a leader in propulsion system design and development for the Royal Navy's nuclear submarine fleet and the sole provider and technical authority. Join us and we'll provide an environment where you can be yourself. An inclusive, digital-first culture that invests in you, gives you a platform for continuous learning, and access to an incredible breadth and depth of opportunities to grow your career. The Future Product Team within the Nuclear (Submarines) business is looking for a Systems and Verification Engineer as part of the Development Engineering team. Future Product sits within the Technology Department and is responsible for the technology development programmes delivering the next generation of nuclear products across the Submarines Enterprise. We are a small agile team that work across a breadth of technical scope and relish the opportunities of having hands on impact to major engineering programmes straight from the pre-concept phase onwards. Working closely with adjacent teams across Technology and the specialist taxonomies across the business the Development Engineering team are responsible for defining and implementing the Verification and Validation strategy and key model based engineering enablers for Future Product. This includes the identification and delivery of necessary development programmes to increase verification capability across analysis, test and demonstration where needed. This exciting opportunity requires innovative, pragmatic, systems thinkers to work together with a variety of teams to understand how novel technologies and products can be validated and modelled for entry into service and associated capability will be required. From bench top test rigs to large scale demonstrators and new analytical and simulation methods, the Future Product V&V programme poses a wealth of opportunities to deliver the next step change in Nuclear technology. We offer excellent development, a competitive salary and exceptional benefits. These include bonus, employee support assistance and employee discounts. Your needs are as unique as you are. Hybrid working is a way in which our people can balance their time between the office, home or another remote location. It's a locally managed and flexed informal discretionary arrangement. As a minimum we're all expected to attend the workplace for collaboration and other specific reasons, on average three days per week. What you will be doing: With this exciting opportunity you will get a chance to be involved with the following: You will be responsible for leading the section developing and delivering model based engineering capabilities critical for delivery of future product. Including Model Based Systems Engineering and associated tools and capabilities.You will champion systems engineering methodologies and systems thinking skills to enable ways of working in future product programmes.You will work in close collaboration with Verification, Validation and Systems Engineering Capability Leads, to understand existing capability and required capability development to deliver a robust V&V Programme (including Analytical Engineering, Experimental Engineering and Systems Engineering) as well as secondary capability leads where required (e.g. Manufacturing Engineering).You will collaborate with other critical enablers work streams of the programme to ensure model based engineering approaches is commensurate with other digital thread capabilities.You will identify, develop and implement required workstreams to support the delivery of a Digital Reactor in the early concept phases of future product programmes.You will be responsible for resource and work load management and act as the people leader for engineers within the section.You will work as a flexible member of the Chief Engineering Team, taking on additional responsibilities across adjacent to daily scope in line with individual interests and business needs as the programme matures. Who we're looking for: At Rolls-Royce we embrace agility, are bold, pursue collaboration and seek simplicity in everything we do. These principles form our values and behaviours and are an essential component of our assessment process and are fundamental qualities that we seek for all roles. To be successful in this role you will need to meet the following criteria: Degree or equivalent in a relevant engineering or science-based subject.Understanding of Verification and Validation in Engineering Systems and the role of a V&V within a complex Engineering programme.Knowledge of systems, sub-systems and components functionality.Knowledge of systems engineering and model based engineering methods.Experience of delivering structured verification programmes desirable.Experience in working within analytical or testing and simulation capabilities desirable.Evidence of working across multi-disciplined teams and projects, working flexibly both as an individual and closely with other team members.Good IT skills, experience with dedicated V&V and Systems Engineering software desirable (Including Model Based Systems Engineering and requirements management packages).Good interpersonal, time management and problem solving skills.Ability to work to Rolls-Royce company processes in order to ensure quality of output; and to Health, Safety and Environmental rules and legislation. We are an equal opportunities employer. We're committed to developing a diverse workforce and an inclusive working environment. We believe that people from different backgrounds and cultures give us different perspectives. And the more perspectives we have, the more successful we'll be. By building a culture of respect and appreciation, we give everyone who works here the opportunity to realise their full potential. We welcome applications from people with a refugee background. You can learn more about our global Inclusion strategy at Our people | Rolls-Royce To work for Rolls-Royce Submarines you need to hold a Security Check (SC) clearance without any caveats to that clearance. Rolls-Royce will support the application for Security Clearance if you don't currently already have this in place. Due to the nature of work the business conducts and the protection of certain assets, you must hold a UK nationality. Any dual nationals will require additional scrutiny and background checks prior to commencing work with RRSL. Job Category Validation and Verification Posting Date 16 Oct 2025; 00:10 Posting End Date 23 Oct 2025PandoLogic. Keywords: Verification Engineer, Location: Derby, ENG - DE23 8NX

Job Description Dynamics Engineer- Submarines Full Time Derby / onsite We are currently looking for talented Engineers to join the Dynamics Group in Rolls-Royce Submarines. As an engineer in the Dynamics Group, you will be engaging primarily in structural assessments relating to impact, seismic, shock and vibration scenarios for all components within the steam raising plant. We also assess a wide range of on-board and shore-based plant support equipment and radioactive material transport containers. The work is interesting and varied; there will be situations in which you will be relied upon to respond rapidly to emergent challenges, providing a vital and valued service to the Submarines enterprise. Why Rolls-Royce? Rolls-Royce Submarines is a leader in propulsion systems design and development for the Royal Navy's nuclear submarine fleet. They are the sole provider and technical authority for the Nuclear Steam Raising Plant, managing all aspects of plant design, safety, manufacture, performance and through-life support. Powering the submarines of today and building solutions for tomorrow has never been more important. We're a leader in propulsion system design and development for the Royal Navy's nuclear submarine fleet and the sole provider and technical authority. What we offer: Join us and we'll provide an environment where you can be yourself. An inclusive, digital-first culture that invests in you, gives you a platform for continuous learning, and access to an incredible breadth and depth of opportunities to grow your career. We offer excellent development, a competitive salary, and exceptional benefits. These include bonus, employee support assistance and employee discounts. What you'll be doing: In this role you will: Undertaking a broad range of mechanical assessments, including linear, non-linear and dynamic finite element analyses.Making use of traditional hand calculation methods, commercial finite element codes and bespoke analysis codes.Using assessment work to develop and substantiate component designs, inform through-life management and, in many cases, pursue regulatory approval for current class, in-build and future class submarines.Development and implementation of methodologies to assess components, along with the definition of testing programmes to underwrite those methods.Relaying the method and outcome of assessments, clearly and efficiently, to a range of audiences at all seniorities within Rolls-Royce, industry partners and customer organisations. Who we're looking for: At Rolls-Royce we embrace agility, are bold, pursue collaboration and seek simplicity in everything we do. These principles form our values and behaviours and are an essential component of our assessment process and are fundamental qualities that we seek for all roles. Essential: Qualified to degree level, or with equivalent experience, in mechanical engineering, physics or mathematics.Able to prioritise tasks and work effectively on multiple projects at the same time.Demonstrate interest in dynamic analysis and test. Desirable: Good all-round knowledge of the fundamental failure mechanisms and the methods used to assess against them.Practical experience of using finite element methods for structural component assessment, along with experience of providing support to manufacturing engineers, designers and safety case authors.Good working knowledge of dynamics and non-linear events.Experience generating and working with finite element models, using industry standard tools such as LS-DYNA, Abaqus, ANSYS, HyperMesh and the Oasys suite.Experience of working in an industry where safety is a priority and in which components are justified to safety cases and/or design code requirements.Experience of working as part of a multi-disciplinary design team; particularly where concurrent engineering methods have been used.Membership, or Associate Membership, of a relevant professional institution and working toward chartership. We're an equal opportunities employer. We're committed to developing a diverse workforce and an inclusive working environment. We believe that people from different backgrounds and cultures give us different perspectives. And the more perspectives we have, the more successful we'll be. By building a culture of respect and appreciation, we give everyone who works here the opportunity to realise their full potential. You can learn more about our global Inclusion strategy at Our people | Rolls-Royce To work for Rolls-Royce Submarines you need to hold a Security Check (SC) clearance without any caveats to that clearance. Rolls-Royce will support the application for Security Clearance if you don't currently already have this in place. Due to the nature of work the business conducts and the protection of certain assets, you must hold a UK nationality. Any dual nationals will require additional scrutiny and background checks prior to commencing work with RRSL. Job Category Mechanical Systems Posting Date 19 Jun 2025; 00:06 Posting End Date PandoLogic. Keywords: Marine Engineer, Location: Derby, ENG - DE23 8NX

Job Description Manufacturing Engineer Derby Full time Why join Rolls-Royce? At Rolls-Royce we are proud to be a business that has truly helped to shape the modern world and are committed to always being a force for progress; powering, protecting and connecting people everywhere. By joining Rolls-Royce, you'll have the opportunity to work on world-class solutions, supported by a culture that champions inclusivity, creativity, and your professional growth. Position Summary Rolls-Royce is seeking a passionate Manufacturing Engineer to play a key role in advancing our Aerospace business. Based in Derby, Rotherham, or the West Midlands, you'll enhance products and processes, introduce new technologies through APQP, and uphold safety, quality, cost, and delivery standards across our plants and supply chain, all while developing your career in a culture built on creativity, inclusivity, and engineering distinction. This job advertisement is intended to fill several open positions in various departments: Turbine SystemsProcurementAssembly, Test & ControlsCompression SystemsEngineering for Services and DesignExperimental What you will be doing: Developing, implementing, validating and continuously improving the methods of manufacture which are capable of meeting requirements for safety, quality, cost and lead time. Working with interfacing teams, local experts, partners, research institutes, and suppliers to ensure technical aspects of manufacturing processes are understood and accounted for as required.Developing manufacturing technology capability through manufacturing capability acquisition, internally and externally within the Rolls-Royce supply chain. Capture, evaluate and use data to demonstrate and improve the capability of manufacturing methods.Working with the engine project, design teams, and supply chain (where relevant), to support the introduction of new products across our business. An expert in APQP and PPAP, you'll be the voice of Manufacturing Engineering, driving design for manufacture, assembly and repair, whilst making sure that our products can be delivered on cost, and with a "Zero Defect" mindset for quality and sustainability.Identifying, developing and implementing innovative ways of working to drive continuous improvement in quality, sustainability and cost, including digital manufacturing solutions which enable the creation of a "digital thread" throughout the product lifecycle, connecting design, manufacturing and operational activities. Position Requirements: Professionally Qualified Engineer (for example UK minimum HND/foundation degree or other national equivalent)Manufacturing engineering experience in one of our core manufacturing processes - Casting, Grinding, EDM, Mill / Turn machining, Assembly of complex parts, coating or joining. For procurement, in addition, we would also welcome experience in raw materials, forgings, fabrications, composites, or electronics.Excellent knowledge in:Problem solving, process improvement and control, and the use of APQP & PPAP tools to manage change.Lean Process Improvement and Industrial Engineering techniques to remove waste and optimise productivityDemonstrable experience working in a manufacturing environment, with engineering and Supply Chain teams. Development of suppliers.Demonstrable experience in product development and developing manufacturing capability and processes.Excellent organisational, communication, and team working skills, with a keen enthusiasm to learn and share best practice. Demonstrable ability to influence stakeholders, especially for procurement roles. Our vision is to ensure that the excellence and ingenuity that shaped our history continues into our future. Our multi-year transformation programme aims to turn Rolls-Royce into a high-performing, competitive, resilient and growing company. Join us, and it can be your future vision too. Rolls-Royce are committed to being a respectful, inclusive, and non-discriminatory workplace where individuality is valued, diverse perspectives fuel innovation, and everyone can thrive. Job Category Manufacturing Engineering Posting Date 07 Oct 2025; 00:10 Posting End Date PandoLogic. Keywords: Manufacturing Engineer, Location: Derby, ENG - DE23 8NX

Job Description Test Support Centre - Engineer Derby 37 Hours per week Rolls-Royce are looking for an experienced Test Support Centre - Engineer to join the team in Derby on a full-time permanent basis. Why join Rolls-Royce? At Rolls-Royce we are proud to be a business that has truly helped to shape the modern world and are committed to always being a force for progress; powering, protecting and connecting people everywhere. By joining Rolls-Royce, you'll have the opportunity to work on world-class solutions, supported by a culture that believes individuality is our greatest strength, and all perspectives, experiences and backgrounds help us innovate and enable our high-performance culture. In this role you will define test facility solutions and specifications in accordance with standards. You will also define and manage test facility standards. What you will be doing: As a key member of our engineering function, you'll be responsible for: Acting as a point of contact within your engineering discipline, sharing subject matter expertise and providing advisory support across the team.Representing senior departmental staff and coaching others in areas where you hold technical authority.Managing defined technical packages and investigations, delivering against programme milestones within agreed cost, time, and quality parameters.Gathering and analysing data from engine testing activities to identify faults and root causes.Applying engineering judgement to interpret results and develop effective solutions.Leading the development and continuous improvement of tools, processes, and methods within the engine test facility.Influencing stakeholders and collaborating across multidisciplinary teams to drive change and innovation. Who we are looking for: Key Experiences and any Qualifications A degree in Electrical Engineering or a related discipline (or equivalent experience).Experience in a relevant domain (preferred but not essential).Strong knowledge of electrical systems and fault diagnosis.A curious mindset and a drive to understand why things aren't working-and how to fix them.Excellent communication and presentation skills.Strong organisational and project management abilities.A collaborative approach and the ability to influence and engage stakeholders at all levels. What we offer: Competitive salaryCompany pension contributions raising to 12%6x life assuranceExcellent benefits including employee assistExcellent development opportunities Our vision is to ensure that the excellence and ingenuity that shaped our history continues into our future. Our multi-year transformation programme aims to turn Rolls-Royce into a high-performing, competitive, resilient and growing company. Join us, and it can be your future vision too. Job Category Validation and Verification Posting Date 07 Oct 2025; 00:10 Posting End Date 21 Oct 2025PandoLogic. , Location: Derby, ENG - DE23 8NX

Overview Are you an experienced Commercial Gas Engineer? Do you have experience gained within Facilities Management or Construction? Can you travel around various sites in and around the Newcastle, Durham and Darlington Area and travel across the North East ? If you have answered yes to all three, then we may have an exciting career move for you! • Salary: Up to £53,860 per annum, depending on experience, • Door to door pay, • Van (with option for personal use) and fuel card, • Smartphone, tools, uniform, PPE, • Up to 4% discretionary bonus scheme, subject to achievement of targets. Responsibilities Working for one of our household name clients, you’ll be a key member of the gas maintenance team responsible for delivering planned and preventative gas maintenance, fault finding and repair, as well as ensuring high levels of Health & Safety compliance at all times. Tasks will be allocated for you to complete within the set service level agreements, ensuring all work orders are opened and closed in real time. If the job needs technical or specialist help, we’ll call them in - you’re not expected to be an expert, but we rely on you to let us know it this is needed. As you will be representing Arcus, it is essential you make a good impression and comply with the dress code and maintain your Company vehicle in good condition. You’ll enjoy working autonomously in a pressurised environment and be able to prioritise a complex and demanding workload. You’ll have excellent written and verbal communications skills, enabling you to communicate all operational issues within your region. You’ll be customer service driven and enjoy working within a people focused environment. As a skilled Gas Engineer you’ll have experience gained within a Facilities Management or Construction environment, with a proven track record of working on High Profile commercial contracts, ideally within retail/supermarkets. You will also have an appreciation of refrigeration systems, as well as an understanding and knowledge of commercial M&E service technologies. Qualifications • A recognised commercial Gas qualification – essential, • Gas Safe certification – essential, • HVAC knowledge – essential, • A full driving licence - essential, • Awareness of budgeting of parts and material usage Additional Information: • The role will involve working 45 hours per week (time & half overtime after 45 hours), • You’ll be on call 1 in 4 weeks When you join us, you will also receive: • 25 days annual leave, plus bank holidays, • Generous contributory pension scheme of matched contributions between 5% and 6% max, • Life Assurance, • Free eye test and contribution towards glasses with Specsavers (T&Cs apply), • Learning & Development opportunities, • Funded Training Sponsorship Scheme, • Cycle to Work Scheme, • Health cash plan, • Up to 10% off B&Q/ Trade Point, • 20% off Nuffield Fitness and Wellbeing Centres At Arcus we are passionate about individual development which is why we are proud to offer industry leading Learning & Development opportunities to our colleagues. At our National Training Academy in Stevenage we have our own in-house team of experienced technical trainers who focus on upskilling and cross-skilling our rapidly expanding mobile engineering team. Colleagues can expect to receive significant investment in safety and technical training to ensure ongoing development of their skills and expertise and to ensure we retain our industry leading self- delivery capability. Don’t miss out on this great opportunity, apply today by clicking on the ‘apply’ button.

FPGA Design Engineer (Contract) Rate: £450–£750/day DOE (Inside IR35) Location: Derby (On site) Contract Length: 6-month rolling (Multi-year project) A leading engineering consultancy is seeking skilled FPGA Design Engineers to support high-integrity UK infrastructure and security programmes. These are long-term contract opportunities contributing to complex, safety-critical systems. We are looking for engineers with a solid understanding of FPGA design and verification processes, ideally with experience delivering solutions from concept through to implementation and test. You’ll join a collaborative team working closely with end clients on national-level engineering challenges. Key Responsibilities: • Design, implement, and verify FPGA solutions using VHDL., • Translate system-level requirements into robust, scalable FPGA architectures., • Perform synthesis, place and route, and timing closure to meet design constraints., • Develop testbenches, scripts, and supporting software to streamline the design lifecycle., • Debug and resolve technical issues in demanding environments., • Capture and refine technical requirements to ensure alignment with project objectives. Essential Skills & Experience: • In-depth knowledge of FPGA design principles and hardware development., • Proficiency in VHDL and associated simulation and synthesis tools., • Experience developing and testing complex digital architectures., • Strong problem-solving skills and attention to detail., • Ability to work effectively within multidisciplinary teams and liaise directly with clients. Desirable: • Familiarity with version control systems (e.g., Git, SVN)., • Scripting experience in TCL or Python for tool automation. Additional Information: Due to the sensitive nature of the work, successful candidates must be eligible for UK Security Clearance. Pre-employment screening will be required.

Site & Systems Engineer One Big Circle – Derby Full-Time 37.5 hours over 5 Days Salary dependent on experience About One Big Circle Formed in 2017, One Big Circle is a fast-growing Bristol technology company that provides “Intelligent Video” solutions. We focus entirely on solving real-world industry problems by fusing new technology in the field of Video, IOT, Cloud and AI providing end to end solutions which allow our customers to dramatically improve their operational efficiency and safety. Our culture is one of high-quality technical delivery and we work at a speed that many industries are unaccustomed to; we have done this by building a team dynamic that challenges and empowers our people and creating an environment where everyone contributes and learns. We are growing, profitable and have ambitious plans to continue expansion in and beyond our existing markets. We are looking for a proactive and motivated individual to join our team to support the business in further growing our flagship award-winning product: AIVR. AIVR (Automated Intelligent Video Review) is a state-of-the-art video technology system used by thousands of people in the rail industry. It is relatively new to our market, rapidly evolving and there are lots of people excited about what more it can achieve. As an employer, we believe in a happy, inclusive & supportive workplace where everyone can work to their best ability. We are growing quickly and need to recruit another valued member of the team. Could that be you? Role Summary We are looking for an Engineer to join our Site Team, supporting projects installed on trains across the UK and at our Derby production facility. This is a hands-on role involving installation, commissioning, and maintenance of advanced technologies such as machine-vision cameras, laser measurement systems, thermal sensors, embedded Linux, IP networking, and GPS/4G/5G. You’ll split your time between site visits nationwide and our Derby office, ensuring systems are kept running safely and efficiently. Experience with field-based technology such as CCTV, monitoring, or measurement equipment is preferred, while confidence working in secure or restricted environments is essential. Prior rail industry experience would be an advantage. Responsibilities • Liaise with clients to understand and help plan timings for site-based activities., • Plan work, risk assessments, and method statements., • Contribute to design, building, configuring, and testing systems., • Install and commission systems that have been tested in our production facilities., • Independently carry out work on-site in a safety-conscious and professional manner., • Build relationships with key on-site personnel., • Communicate proactively with other team members to troubleshoot problems and create solutions., • Create and maintain technical and test documentation., • Work with our Business Development team to carry out unit/location surveys for potential new projects and installs., • Ensure tools, materials, and work areas are kept organised and safe., • Follow health & safety procedures and contribute to a safe working environment., • Report faults, hazards, and incidents to the supervisor/manager., • Support other site operations as required. Personal Qualities and Experience • Self-motivated, reliable, and hands-on with a positive, proactive approach, • Strong communication, organisational, and problem-solving skills, • Effective under pressure with the ability to multitask and prioritise work, • Flexible and adaptable, with meticulous attention to detail when required, • Team player with strong written and verbal communication skills, including documentation/specification writing, • Safety-conscious, responsible, and punctual, • Physically fit and able to carry out manual tasks, • Experience delivering projects in an industrial environment; rail industry experience and certification desirable, • A UK driving licence, along with flexibility to travel to sites across the UK, is essential for this role. Company Benefits Include: • Auto enrolment Pension Scheme, • 25 Days Holiday plus bank holidays, • Life Assurance, • Private Healthcare Cover, • Work related training courses as required, • Communal working area plus dedicated desk space, • Significant investments made to create an engaging and enjoyable work environment for this primarily office-based role, • Access to Bike to Work Scheme, • Secure bike storage and shower facilities, • Social events You would be a valued part of a fast growing team where your ideas and opinions are valued as we continue the exciting journey of One Big Circle. Successful candidates will need to pass a BPSS (Baseline Personnel Security Standard) check as part of the onboarding process. How to apply Interested candidates should submit their CV and a covering letter via email to Discover more about One Big Circle by visiting our website: ___

Materials Engineer Location: Castle Donington - Flexible hybrid basis Contract Type: Outside IR35 Contract An innovative engineering organisation is seeking a Materials Engineer to support the development of advanced turbomachinery products. This is a contract role offering the opportunity to work on cutting-edge technology in a dynamic, hybrid working environment. Key Responsibilities • Select, characterise, test, and qualify materials to meet mechanical, thermal, and lifing requirements., • Support product design with materials expertise and contribute to design studies., • Collaborate with suppliers to optimise manufacturing techniques (e.g. heat treatment, coatings)., • Validate manufacturing methods and resolve material-related anomalies., • Prepare technical reports and specifications for materials testing and inspection., • Contribute to materials development for next-generation components. Ideal Candidate Profile • Degree in Materials Engineering or equivalent industry experience., • Significant experience in materials engineering within a relevant industry., • Strong technical knowledge, ideally with turbomachinery experience., • Proven problem-solving skills and ability to work cross-functionally., • Flexible, proactive, and comfortable working outside the traditional scope of a materials engineer. Personal Attributes • Credible, trustworthy, and open to constructive challenge., • Self-starter with strong communication and relationship-building skills., • Resilient, assertive, and data-driven., • A true team player. Working Style This is a hybrid role involving: • Time in the office with the wider team., • Travel to suppliers., • Remote work for focused tasks

Mobile Electrical Engineer 42/43K – Midlands My client is looking for a Mobile Electrician to join their expanding company. Test & Inspection It is expected that the Electrician will have proven experience within the Electrical Industry and hold recognised trade qualifications a long with a m

Baltic Recruitment are delighted to be supporting MDS Aero, a global leader in the design and construction of gas turbine engine test facilities with their search for an Application Support Engineer. Provide end-to-end technical and engineering support for MDS software products across fixed and depl

We are AMS. We are a global total workforce solutions firm; we enable organisations to thrive in an age of constant change by building, re-shaping, and optimising workforces. Our Contingent Workforce Solution (CWS) is one of our service offerings; we act as an extension of Rolls-Royces recruitment team and provide professional interim and temporary resources. Rolls-Royce is a respected engineering organisation operating in many sectors including energy, aerospace, marine and defence. Rolls-Royce pioneers cutting-edge technologies that deliver clean, safe & competitive solutions to meet our planet's vital power needs. Due to a number of exciting change and transformational activities across the Rolls-Royce business we are now seeking to add a number of Thermofields Engineers. The Thermofields Engineers will be based in Derby. Youll be responsible for: Define system, sub-system and component requirements for thermofluidic, temperature and thermo-mechanical analysis. Develop and evaluate concepts using analytical methods to support system-level design trades and architecture selection. Perform modelling, simulation and verification at component and system level across the product lifecycle. Plan and conduct validation activities including test specification, model calibration and uncertainty quantification. To be successful in this role you will need to: Hold a Bachelors degree or higher (or regional equivalent) in Engineering or a related discipline. Apply logical, analytical and innovative thinking to solve complex engineering problems. Demonstrate proactive ownership, high self-motivation, and strong customer focus. Communicate effectively and collaborate confidently with peers and technical leaders. Ideally have experience in thermal, mechanical, or fluid systems, and be working toward Chartered status with a relevant professional body. Next steps: If you are interested in applying to the Systems Design Integration Engineer position and meet the criteria outlined above, please click the link to apply and we will contact you with an update in due course. Please note that due to recent changes in Off Payroll (IR35) legislation, our client only operates with contractors that operate via a PAYE or Umbrella model. We are unable to accept applications from candidates wishing to operate under their own Limited Company. AMS, a Recruitment Process Outsourcing Company, may in the delivery of some of its services be deemed to operate as an Employment Agency or an Employment Business. TPBN1_UKTJ

Quest Global is an organization at the forefront of innovation and one of the worlds fastest growing engineering services firms with deep domain knowledge and recognized expertise in the top OEMs across seven industries. As a team of remarkably diverse engineers, we recognize that what we are really

Perform regression testing, functional testing, integration testing, performance testing, and user acceptance testing (UAT). We are seeking a detail-oriented and analytical Software Test Engineer to join our QA team. Analyze test results to ensure existing functionality is not negatively impacted by

An exciting opportunity has arisen for an experienced Electromechanical Test & Commissioning Engineer to join a world-class power systems testing facility that supports the development of cutting-edge marine and energy technologies. In this role, you will play a key part in designing and specifying

As a Test Engineer in the Test Department, you will report to the Test Engineering Manager and be responsible for testing electro-optical-mechanical components, sub-assemblies, and systems. Your duties will include conducting Factory Acceptance Tests (FAT) using standard test equipment, fault-findin

We are in the market for a Test Automation Engineer with previous experience of designing and developing test automation frameworks in Playwright using either Typescript or JavaScript. Job Title: Test Automation Engineer (Front end & API). Provide regular status updates and reports on testing progre

A Senior Electronics Test Engineer is sought to join an innovative engineering team in Essex, contributing to the testing, validation, and optimisation of advanced electronic modules for the global test and measurement industry. The Senior Electronics Test Engineer, Essex, will take ownership of com

We are seeking a motivated Electronics Test Engineer to join our dynamic team. Devise, implement, and monitor PCB testing processes in line with industry best practices. Produce accurate documentation which will include electronic schematics and test designs.

What's on Offer for this Automation Test Engineer role in Kent:. If you're interested in this exciting Automation Test Engineer opportunity based in Kent, please send your CV to KGraveney@redlinegroup. They are seeking a skilled Automation Test Engineer to join their growing R&D team.

You must have knowledge and exposure to the capabilities of AI, how it can be used to benefit testing and automated testing as well as how to carry out testing of AI solutions and the ability to integrate that into an automation capability. You will be responsible for automated testing of Microsoft

Performing bench testing, performance and functional testing, accelerated and real-time aging studies, and packaging validation. Analysing and summarising test results and preparing test summary reports to support regulatory submissions. Degree in Engineering, Biomedical Engineering, Materials Scien

Role :-Laboratory Product Test Engineer - Electrical SafetySalary :-Competitive (DOE)Location :-BuckinghamshireHours :-Monday - Friday (37.

Job Description Test Support Centre - Engineer Derby 37 Hours per week Rolls-Royce are looking for an experienced Test Support Centre - Engineer to join the team in Derby on a full-time permanent basis. What you will be doing: As a key member of our engineering function, you'll be responsibl

LEV Test Engineer (Ventilation / P601) £45,000 - £50,000 + Company Van & Fuel Card + Pension + Door-to-Door Pay + Career ProgressionBodminAre you an experienced LEV Test Engineer with a P601 qualification looking to join a well-established and growing business offering excellent benefits, securit

Job Description Fluid System Design Engineer - Test Rig Design (Submarines) Full Time Derby Fluid System Design Engineers to undertake rig design to support both Verification and Validation (V&V) and production testing of Nuclear Steam Raising Plant components. Experience of specifying, designin

Senior Manufacturing Test Engineer Duration: Permanent Hours: Full Time (37 hours per week) Location: Fife, Scotland Security Clearance Requirements: Baseline – Must be eligible to work in the UK without sponsorship.

ETL Systems has been at the forefront of RF design and manufacturing for over 35 years.It designs and builds essential elements of critical satellite communications infrastructure.Its culture of innovation and its solutioneering approach have established it as a market leader in the field.ETL's rapi

Test Equipment Design EngineerAerospace EngineeringTewkesburyPermanentThe Role - Test Equipment Design EngineerThis is an excellent opportunity for an electronically biased test equipment Design Engineer to join a prominent precision engineering company within the aerospace sector. You will lead the

Testing, inspecting, and certifying installations in line with BS7671.

Control Panel / Equipment Test EngineerLocation: St HelensUp to £42,000 (banding dependent)Days only - Mon-Thurs 8:00-16:30, Fri 8:00-14:00We're supporting a leading engineering & maintenance provider with the recruitment of a Control Panel / Equipment Test Engineer to join their St Helens site.

A fantastic opportunity has arisen for a Test Development Engineer to contribute to the design, integration and validation of test system hardware solutions, joining our highly skilled and dynamic Test Equipment Design Team.

Fixed Wire Test Engineer - Portsmouth areaExperience with Electrical Testing and Inspection? Expert at Fixed Wire Testing? Looking for a great career with a market-leading company? Come and be part of our success!Great benefits including uncapped bonus, company vehicle and more!At phs Compliance our

Electrical Commissioning and Test Engineer – St. The ideal candidate should have experience in the electrical testing of LV switchboards including such items as protection relays, controls and metering.

Senior RF Test Systems Engineer – Norwich Salary: £45,000–£50,000 per annum Are you an experienced RF Test Systems Engineer looking for your next challenge? Join a forward-thinking engineering team in Norwich and take ownership of designing and developing automated RF test systems that ensure

Are you an experienced Senior Electronic Test Engineer with a background in RF, cellular systems, and electronics testing? Do you enjoy working hands-on with lab equipment and supporting innovative sales teams across exciting projects worldwide? If so, this could be the perfect role for you. Working

Test, Support & Commissioning Engineer - £33,000 - £42,000 - plus travel allowances and expenses covered, 25 days holiday + bank increasing with service, death in service benefit of 4x salary, salary sacrifice pension scheme and share incentive plan. Are you a qualified in Electrical / Electronic

Senior Manufacturing Test Engineer.

Control Panel Test EngineerLocation: Watton, NorfolkReports To: Production ManagerContract: Full-time, permanentWe are seeking an experienced and hands-on Control Panel Supervisor to join our engineering and manufacturing team. This role combines production leadership, quality control, and technical

Key skills required for the Senior Electronics Test Engineer based in Bedfordshire:RF engineering experience (cellular preferred). Are you an experienced Senior Electronic Test Engineer with a background in RF, cellular systems, and electronics testing? Do you enjoy working hands-on with lab equipme

Henlow MBDA has a fantastic opportunity for you to work in an UKAS/ISO 17025 environmental test laboratory on a variety of projects that will stretch your skills and imagination as an engineer.

Join us and start building tomorrows world today!Job DescriptionWe are currently recruiting for a Dynamometer Test Engineer to join our team in Solihull and contribute to exciting projects within the aerospace sector. Work collaboratively with engineering teams to refine test procedures and improve

Electrical Commissioning and Test Engineer – St. AlbansContract: Temporary to Permanent (After 13 weeks)Salary: £40,000 - £45,000 Per AnnumShifts: Monday to Friday, 8:30am-4:30pmImmediate StartThe ideal candidate should have experience in the electrical testing of LV switchboards including such

Murray McIntosh are currently searching for an Electronic Test Engineer to join a key client of ours on a contract basis as detailed below: You will be responsible for carrying out electronic testing activities on a variety of both RF and electronic products. Experience of performing IPC level insp