Trabajos american systems en Los Angeles, California - Page 18Crear alertas

Job DescriptionQuality EngineerPay $75,000 - $95,000 a yearFull-time1st Shift + overtimeResponsibilities • Provide timely resolutions to customer inquiries., • Returned Material Authorization (RMA) coordination and disposition., • Corrective Action Report (ICAR, CCAR, SCAR) generation and coordination., • Perform scheduled internal quality system audits, process audits, Nadcap audits and supplier audits., • Maintain calibration system., • Maintain quality procedures (QP’s) and work instructions (QAI’s and PCM’s) to conform to all applicable customer requirements, industry standards and registration systems., • Maintain all required certifications: AS9100; Nadcap; IPC-6012; IPC-6013; IPC-6018; MIL-PRF-55110; MIL-PRF-50884; MIL-PRF-31032; IPC-1710; UL., • Submit test samples to outside labs for tests (CL 3/A, IST, HATS, Group B, Group C, PCI, CVI, etc.)., • Generate and submit MIL-PRF-31032 periodic reports, • Utilization of SPC and MSA to ensure process capabilities and control., • Technical Review Board (TRB) involvement when required., • Follow all environmental, health and safety policies, guidelines and regulations., • Other responsibilities may be assigned.Qualifications, • Thorough understanding of quality systems., • Understanding of current IPC, military and customer specifications and requirements., • Ability to read, interpret and work from customer drawings, specifications and standards., • Understanding of quality and statistical measurements, including SPC, DOE, Cpk, MSA, GR&R, etc., • Ability to work effectively in a team environment., • Strong technical writing skills and customer interface skills., • Ability to read microsections., • Computer literate, able to utilize Word, Excel, Power Point, Visio and Access., • Minimum 5 years experience in PWB manufacturing or similar industry, • Minimum 3 years in Quality Assurance / Quality Control disciplines., • IPC-A-600 and IPC-A-610 certifications., • ASQ Certified Quality Engineer and Certified Quality Auditor certifications preferred., • General understanding of Discus and Net Inspect software for generating first article reports., • Ability to obtain Honeywell SCA (Source Certifying Agent) status., • May be exposed to chemicals, dust, and high noise levels., • May be required to work in a clean room environment., • May be required to remain on call during some portion of off shift hours. May be required to work off shift hours and overtime., • May be required to travel within North American.

Job Description K2 is building the largest and highest-power satellites ever flown, unlocking performance levels previously out of reach across every orbit. Backed by $450M from leading investors including Altimeter Capital, Redpoint Ventures, T. Rowe Price, Lightspeed Venture Partners, Alpine Space Ventures, and others – with an additional $500M in signed contracts across commercial and US government customers – we're mass-producing the highest-power satellite platforms ever built for missions from LEO to deep space. The rise of heavy-lift launch vehicles is shifting the industry from an era of mass constraint to one of mass abundance, and we believe this new era demands a fundamentally different class of spacecraft. Engineered to survive the harshest radiation environments and to fully capitalize on today's and tomorrow's massive rockets, K2 satellites deliver unmatched capability at constellation scale and across multiple orbits. With multiple launches planned through 2026 and 2027, we're Building Bigger to develop the solar system and become a Kardashev Type II (K2) civilization. If you are a motivated individual who thrives in a fast-paced environment and you're excited about contributing to the success of a groundbreaking Series C space startup, we'd love for you to apply. The Role You will own the success of mechanical structures and mechanisms used for a propulsion system that will be the highest-powered electric propulsion system ever flown and unlock new mission concepts and increase our access to deep space. As part of a small multidisciplinary team, your role will involve mechanical design, development, build, test, and analysis of the satellite's plasma propulsion system and all related hardware. In your first 6 months, you will define product requirements, create initial concepts and trades, perform preliminary and detailed analysis, define development test campaigns, and produce development hardware. In your first year, you will validate your designs through prototype iterations and build and qualify flight hardware. In your first two years you will fly your hardware in space while directly supporting production and integration. Responsibilities • Own the mechanical design of propulsion system hardware including propulsion modules, critical thruster components, the propellant management system, avionics box design, propulsion secondary structures, and potentially tank development, • Validate your designs through the entire lifecycle from concept to production, and successful flight demonstrations, • Generate 3D models, fully dimensioned drawings, and interface control documents, • Perform analysis on data from testing hardware, iterating designs, and critical go/no-go calls on hardware performance, • Develop and execute component and system-level test plans, • Manage key propulsion vendors and suppliers through hardware delivery, • Bachelor's degree in mechanical, aerospace, or other relevant engineering discipline, • 3+ years of experience with mechanical and/or electromechanical design and analysis, • Experience with CAD or FEA software packages, • Experience with the practical application of GD&T, • Demonstrated proficiency in the principles of mechanical design, materials, thermodynamics, and fluids, • Demonstrated ability to own mechanical hardware or systems within an integrated engineering team outside a classroom setting, • Experience in advanced propulsion technologies, including high-performance engines, in-space propulsion, and propulsion system integration, • Experience designing, building, and testing mechanical assemblies for aerospace applications (satellite mechanical systems, payloads, launch vehicles, propulsion systems, and/or aircraft structures and mechanisms), • Deep experience in the development and qualification of high-pressure and low-pressure fluidic components, this may include flight feed system or pressurized tanks, • Demonstrated understanding of structural analysis and failure modes of complex mechanical systems in space environments and operations, • Base salary range for this role is $100,000 - $140,000 + equity in the company, • Salary will be based on several factors including, but not limited to: knowledge and skills, education, and experience level If you need a reasonable accommodation as part of your application for employment or interviews with us, please let us know. Export Compliance As defined in the ITAR, "U.S. Persons" include U.S. citizens, lawful permanent residents (i.e., Green Card holders), and certain protected individuals (e.g., refugees/asylees, American Samoans). Please consult with a knowledgeable advisor if you are unsure whether you are a "U.S. Person." The person hired for this role will have access to information and items controlled by U.S. export control regulations, including the export control regulations outlined in the International Traffic in Arms Regulation (ITAR). The person hired for this role must therefore either be a "U.S. person" as defined by 22 C.F.R. § 120.15 or otherwise eligible for a federally issued export control license. Equal Opportunity K2 Space is an Equal Opportunity Employer; employment with K2 Space is governed on the basis of merit, competence and qualifications and will not be influenced in any manner by race, color, religion, gender, national origin/ethnicity, veteran status, disability status, age, sexual orientation, gender identity, marital status, mental or physical disability or any other legally protected status.

Job Description Hadrian - Manufacturing the Future Hadrian is building autonomous factories that help aerospace and defense companies manufacture rockets, satellites, jets, and ships up to 10x faster and up to 2x cheaper. By combining advanced software, robotics, and full-stack manufacturing, we are reinventing how America produces its most critical parts. We’re accelerating our mission with the launch of Factory 3 in Mesa, Arizona, a 290,000-square-foot facility creating 350 new jobs. We are expanding rapidly to support thousands of future hires, launching Hadrian Maritime to expand into naval production, and introducing a Factory-as-a-Service model that delivers complete systems instead of individual parts. Hadrian is backed by leading investors including T. Rowe Price, Lux Capital, Founders Fund, and Andreessen Horowitz, our fast-growing team is united around reindustrializing American manufacturing for the 21st century and beyond. The Role The Associate General Counsel, Employment & Corporate will report to Hadrian's General Counsel and will serve as the company's go-to legal advisor on employment, labor, and corporate matters, with a particular focus on supporting a large, non-exempt workforce across multiple facilities in different geographies. This is a strategic, hands-on role for a senior attorney with significant employment and labor law experience who likes to build and thrives in a high-growth, fast-paced environment. You will partner closely with the General Counsel and People and Operations teams to advise on workforce compliance, policy development and implementation, and labor and employment risk management. What You’ll Do * Advise on all aspects of labor and employment law, including: * Wage and hour compliance * Hiring, termination, and performance management * Policies, handbooks, and employment agreements * Leaves of absence, accommodations, and workforce issues * Support workforce planning initiatives * Partner with cross-functional teams (People, Finance, Operations) to operationalize employment law compliance in a fast-paced advanced manufacturing environment * Draft, review, and negotiate employment agreements and related documents * Develop and maintain policies, playbooks, trainings, and guidance for managers and employees * Serve as a subject matter expert on HR and employment law best practices, ensuring compliance with federal, state, and local laws * Support any internal investigations or audits What We’re Looking For: * JD from an accredited law school and active bar membership * 10 - 15+ years of experience practicing employment law, preferably with exposure to non-exempt / hourly workforce matters in-house and/or in a law firm environment * Experience supporting a manufacturing, industrial, or operational workforce is highly desirable * Strong knowledge of federal, state, and local employment laws, including wage and hour, leave, and accommodations compliance, as well as labor practices * Hands-on experience building and advising on compliance systems * Hands-on experience drafting policies, employment agreements, training materials, and compliance documentation * Strong judgment and ability to advise senior leadership on strategic and operational decisions * Excellent communication and collaboration skills What Sets You Apart: * Experience in high-growth or startup environments * Experience with multi-state hourly workforce compliance * Familiarity with California employment law * Exposure to corporate governance, entity management, and operational compliance * Prior in-house counsel experience supporting People/HR teams in large ops organizations * Ability to translate complex legal requirements into practical guidance for managers and employees * Track record of building scalable processes and documentation to support rapid organizational growth Compensation For this role, the target salary range is $250,000 - $300,000 (actual range may vary based on experience). This is the lowest to highest salary we reasonably and in good faith believe we would pay for this role at the time of this posting. We may ultimately pay more or less than the posted range, and the range may be modified in the future. An employee's pay position within the salary range will be based on several factors, including, but not limited to, relevant education, qualifications, certifications, experience, skills, geographic location, performance, and business or organizational needs. Benefits * Medical, dental, vision, and life insurance plans for employees * 401k * Relocation support may be provided for certain situations, based on business need. * Flexible vacation policy ITAR Requirements To conform to U.S. Government space technology export regulations, including the International Traffic in Arms Regulations (ITAR) you must be a U.S. citizen, lawful permanent resident of the U.S., protected individual as defined by 8 U.S.C. 1324b(a)(3), or eligible to obtain the required authorizations from the U.S. Department of State. Learn more about the ITAR here. Hadrian Is An Equal Opportunity Employer It is the Company’s policy to provide equal employment opportunity for all applicants and employees. The Company does not unlawfully discriminate on the basis of race inclusive of traits historically associated with race (including, but not limited to, hair texture and protective hairstyles, such as braids, locks and twists), color, religion, sex (including pregnancy, childbirth, or related medical conditions), gender identity, gender expression, transgender status, national origin (including, in California, possession of a drivers license), ancestry, citizenship, age, physical or mental disability, height or weight, medical condition, family care status, military or veteran status, marital status, domestic partner status, sexual orientation, genetic information, exercise of reproductive rights, any other basis protected by local, state, or federal laws, or any combination of the above characteristics. When necessary, the Company also makes reasonable accommodations for disabled candidates and employees, including for candidates or employees who are disabled by pregnancy, childbirth, or related medical conditions.

Job Description K2 is building the largest and highest-power satellites ever flown, unlocking performance levels previously out of reach across every orbit. Backed by $450M from leading investors including Altimeter Capital, Redpoint Ventures, T. Rowe Price, Lightspeed Venture Partners, Alpine Space Ventures, and others – with an additional $500M in signed contracts across commercial and US government customers – we're mass-producing the highest-power satellite platforms ever built for missions from LEO to deep space. The rise of heavy-lift launch vehicles is shifting the industry from an era of mass constraint to one of mass abundance, and we believe this new era demands a fundamentally different class of spacecraft. Engineered to survive the harshest radiation environments and to fully capitalize on today's and tomorrow's massive rockets, K2 satellites deliver unmatched capability at constellation scale and across multiple orbits. With multiple launches planned through 2026 and 2027, we're Building Bigger to develop the solar system and become a Kardashev Type II (K2) civilization. If you are a motivated individual who thrives in a fast-paced environment and you're excited about contributing to the success of a groundbreaking Series C space startup, we'd love for you to apply. The Role We are seeking a Senior ASIC Package Design Engineer to implement advanced ASIC package architecture, with a strong focus on flip-chip BGA (FC-BGA) and multi-chip module (MCM) solutions. This role supports the end-to-end package strategy for high-performance mixed-signal and digital SoCs from early architecture and trade studies through vendor engagement, qualification, and production ramp. You will collaborate with internal teams for package design, defining standards, influencing silicon and system architecture, and ensuring first-pass success for complex, high-speed, power-dense ASICs. Responsibilities • Define ASIC package architecture for FC-BGA and MCM solutions, including substrate stack-up, ball-map strategy, power delivery, signal breakout, and mechanical constraints., • Lead package-level trade studies across cost, performance, power integrity (PI), signal integrity (SI), thermal, manufacturability, and reliability., • Establish package design standards, methodologies, and best practices., • Drive detailed design of FC-BGA packages for high-pin-count ASICs with high-speed SerDes, dense power grids, and RF signal content., • Define and review substrate stack-ups, via strategies, impedance control, escape routing, and reference plane planning., • Partner with silicon, RF, and systems teams to co-optimize die floorplans and package interfaces., • Support package-level SI/PI strategy, including high-speed digital interfaces, power delivery network (PDN) design, and decoupling strategy, • Lead thermal architecture at the package level, including lid selection, TIMs, heat-spreaders, and mechanical interfaces to system cooling., • Bachelor's degree in Packaging Engineering, Mechanical Engineering, Electrical Engineering, or a related field., • 5+ years of experience in ASIC package design, with deep expertise in FC-BGA., • Proven experience delivering high-pin-count, high-performance ASIC packages into production., • Strong understanding of substrate technologies and materials, SI/PI fundamentals at the package level, and thermal management for power-dense ASICs., • Fluent in SI/PI and EM simulation tools such as SIWave, HFSS, and ADS., • Experience working directly with OSATs and substrate vendors., • Experience with MCM or heterogeneous integration (chiplets, interposers, advanced laminates)., • Background in high-speed digital or mixed-signal SoCs., • Familiarity with aerospace, space, or high-reliability electronics. Compensation and Benefits: • Base salary range for this role is $180,000 – $260,000 + equity in the company, • Salary will be based on several factors including, but not limited to: knowledge and skills, education, and experience level If you need a reasonable accommodation as part of your application for employment or interviews with us, please let us know. Export Compliance As defined in the ITAR, "U.S. Persons" include U.S. citizens, lawful permanent residents (i.e., Green Card holders), and certain protected individuals (e.g., refugees/asylees, American Samoans). Please consult with a knowledgeable advisor if you are unsure whether you are a "U.S. Person." The person hired for this role will have access to information and items controlled by U.S. export control regulations, including the export control regulations outlined in the International Traffic in Arms Regulation (ITAR). The person hired for this role must therefore either be a "U.S. person" as defined by 22 C.F.R. § 120.15 or otherwise eligible for a federally issued export control license. Equal Opportunity K2 Space is an Equal Opportunity Employer; employment with K2 Space is governed on the basis of merit, competence and qualifications and will not be influenced in any manner by race, color, religion, gender, national origin/ethnicity, veteran status, disability status, age, sexual orientation, gender identity, marital status, mental or physical disability or any other legally protected status.

Job Description Hadrian - Manufacturing the Future Hadrian is building autonomous factories that help aerospace and defense companies manufacture rockets, satellites, jets, and ships up to 10x faster and up to 2x cheaper. By combining advanced software, robotics, and full-stack manufacturing, we are reinventing how America produces its most critical parts. We’re accelerating our mission with the launch of Factory 3 in Mesa, Arizona, a 290,000-square-foot facility creating 350 new jobs. We are expanding rapidly to support thousands of future hires, launching Hadrian Maritime to expand into naval production, and introducing a Factory-as-a-Service model that delivers complete systems instead of individual parts. Hadrian is backed by leading investors including T. Rowe Price, Lux Capital, Founders Fund, and Andreessen Horowitz, our fast-growing team is united around reindustrializing American manufacturing for the 21st century and beyond. Join Us in Advancing Composite Manufacturing We are pushing the limits of composite manufacturing by integrating material science, process control, and production scalability across the full lifecycle—from fiber placement and resin systems through cure, inspection, and validation. By treating composites as a tightly coupled system of materials and processes, we achieve high-performance structures with repeatable quality. We are solving complex challenges in layup, resin behavior, cure kinetics, and non-destructive inspection. This requires engineers with deep expertise in composite systems who can operate across both materials and manufacturing domains. This is a general opportunity to engage composites engineers with specialized experience across key process areas. Core Specialty Areas * Fiber Placement & Layup: Carbon fiber layup (hand layup, automated layup, fiber orientation control) * Resin Systems & Impregnation: Resin impregnation, prepreg handling, resin transfer processes * Thermal Processing: Curing (autoclave, oven, out-of-autoclave processes, cure cycle development) * Inspection & Validation: Non-destructive inspection (X-ray, CT scanning), defect characterization What You’ll Do * Apply composite process expertise to develop, qualify, and optimize manufacturing processes * Control critical variables (fiber orientation, resin content, void fraction, cure profiles) to ensure structural performance * Partner with manufacturing, quality, and design teams to scale reliable composite production * Develop process specifications, work instructions, and acceptance criteria * Lead root cause analysis for defects such as delamination, porosity, voids, and fiber misalignment What We’re Looking For * Degree in Materials Science, Mechanical Engineering, Aerospace Engineering, or equivalent hands-on experience * Demonstrated expertise in at least one composite manufacturing process (layup, curing, impregnation, or inspection) * Strong understanding of composite material behavior, anisotropy, and failure modes * Ability to interpret engineering drawings and composite specifications (ply schedules, stack-ups) * Experience in production or prototyping environments with a focus on process control What Will Set You Apart * Experience across the full composite lifecycle (layup → cure → inspection → validation) * Familiarity with advanced NDI/CT analysis and defect quantification * Experience with aerospace-grade composites or other high-performance applications * Background in process modeling, cure kinetics, or materials characterization Benefits * Medical, dental, vision, and life insurance plans for employees * 401k * Relocation support may be provided for certain situations, based on business need. * Flexible vacation policy ITAR Requirements To conform to U.S. Government space technology export regulations, including the International Traffic in Arms Regulations (ITAR) you must be a U.S. citizen, lawful permanent resident of the U.S., protected individual as defined by 8 U.S.C. 1324b(a)(3), or eligible to obtain the required authorizations from the U.S. Department of State. Learn more about the ITAR here. Hadrian Is An Equal Opportunity Employer It is the Company’s policy to provide equal employment opportunity for all applicants and employees. The Company does not unlawfully discriminate on the basis of race inclusive of traits historically associated with race (including, but not limited to, hair texture and protective hairstyles, such as braids, locks and twists), color, religion, sex (including pregnancy, childbirth, or related medical conditions), gender identity, gender expression, transgender status, national origin (including, in California, possession of a drivers license), ancestry, citizenship, age, physical or mental disability, height or weight, medical condition, family care status, military or veteran status, marital status, domestic partner status, sexual orientation, genetic information, exercise of reproductive rights, any other basis protected by local, state, or federal laws, or any combination of the above characteristics. When necessary, the Company also makes reasonable accommodations for disabled candidates and employees, including for candidates or employees who are disabled by pregnancy, childbirth, or related medical conditions.

Job Description Hadrian - Manufacturing the Future Hadrian is building autonomous factories that help aerospace and defense companies manufacture rockets, satellites, jets, and ships up to 10x faster and up to 2x cheaper. By combining advanced software, robotics, and full-stack manufacturing, we are reinventing how America produces its most critical parts. We’re accelerating our mission with the launch of Factory 3 in Mesa, Arizona, a 290,000-square-foot facility creating 350 new jobs. We are expanding rapidly to support thousands of future hires, launching Hadrian Maritime to expand into naval production, and introducing a Factory-as-a-Service model that delivers complete systems instead of individual parts. Hadrian is backed by leading investors including T. Rowe Price, Lux Capital, Founders Fund, and Andreessen Horowitz, our fast-growing team is united around reindustrializing American manufacturing for the 21st century and beyond. The Role Candidates for this role could end up working with several of our internal products and teams: Flow is Hadrian’s FactoryOS, our core platform comprised of applications that model, manage, and automate an extremely complex network of factories. Copilot is our suite of manufacturing automation products that automates or accelerates key processes within the factory including quoting, CAM programming, and CMM programming. Factory Automation develops robotic cells for use in our factories and the software that controls them. We have a broad set of backend services and applications internally. Candidates interested in redefining manufacturing software—from distributed systems to automation infrastructure—will have ample opportunity to do so. What You’ll Do * Scope, architect, implement, and deploy critical backend services across multiple product verticals. * Design and maintain reliable, scalable, and high-performance APIs and systems in a complex production environment. * Engage in product discovery alongside experts in manufacturing and software—help define what needs to exist and what needs to be better. * Build alongside an incredible team of engineers and operators. What We’re Looking For * Expertise in modern backend technologies, with a deep understanding of distributed systems, service architecture, data modeling, and scalable infrastructure design. * Strong ability and desire to write high-quality, maintainable code. * Experience designing and implementing APIs (REST & gRPC). * Know how to develop, deploy, and maintain backend and full-stack applications using a modern cloud or containerized stack. * Bias toward action and take pride in your work. * Excited to work in a fast-paced environment with high stakes and quick iteration cycles. What Will Set You Apart * Strong product intuition and user empathy. You enjoy understanding how your services impact real operators and workflows. * Experience working across multiple languages or systems as needed: Go, Python, C#, C++, etc. * Background with systems that require high performance, reliability, or real-time processing. * Familiarity with CAD/CAM software, robotics, automation, manufacturing systems, or 3D environments. * Demonstrated success implementing and scaling production systems in complex environments. Compensation For this role, the target salary range is $120,000 - $250,000 (actual range may vary based on experience). This is the lowest to highest salary we reasonably and in good faith believe we would pay for this role at the time of this posting. We may ultimately pay more or less than the posted range, and the range may be modified in the future. An employee's pay position within the salary range will be based on several factors, including, but not limited to, relevant education, qualifications, certifications, experience, skills, geographic location, performance, and business or organizational needs. Benefits * Medical, dental, vision, and life insurance plans for employees * 401k * Relocation support may be provided for certain situations, based on business need. * Flexible vacation policy ITAR Requirements To conform to U.S. Government space technology export regulations, including the International Traffic in Arms Regulations (ITAR) you must be a U.S. citizen, lawful permanent resident of the U.S., protected individual as defined by 8 U.S.C. 1324b(a)(3), or eligible to obtain the required authorizations from the U.S. Department of State. Learn more about the ITAR here. Hadrian Is An Equal Opportunity Employer It is the Company’s policy to provide equal employment opportunity for all applicants and employees. The Company does not unlawfully discriminate on the basis of race inclusive of traits historically associated with race (including, but not limited to, hair texture and protective hairstyles, such as braids, locks and twists), color, religion, sex (including pregnancy, childbirth, or related medical conditions), gender identity, gender expression, transgender status, national origin (including, in California, possession of a drivers license), ancestry, citizenship, age, physical or mental disability, height or weight, medical condition, family care status, military or veteran status, marital status, domestic partner status, sexual orientation, genetic information, exercise of reproductive rights, any other basis protected by local, state, or federal laws, or any combination of the above characteristics. When necessary, the Company also makes reasonable accommodations for disabled candidates and employees, including for candidates or employees who are disabled by pregnancy, childbirth, or related medical conditions.

Job Description Hadrian - Manufacturing the Future Hadrian is building autonomous factories that help aerospace and defense companies manufacture rockets, satellites, jets, and ships up to 10x faster and up to 2x cheaper. By combining advanced software, robotics, and full-stack manufacturing, we are reinventing how America produces its most critical parts. We’re accelerating our mission with the launch of Factory 3 in Mesa, Arizona, a 290,000-square-foot facility creating 350 new jobs. We are expanding rapidly to support thousands of future hires, launching Hadrian Maritime to expand into naval production, and introducing a Factory-as-a-Service model that delivers complete systems instead of individual parts. Hadrian is backed by leading investors including T. Rowe Price, Lux Capital, Founders Fund, and Andreessen Horowitz, our fast-growing team is united around reindustrializing American manufacturing for the 21st century and beyond. The Role Hadrian's Applications Engineering team develops 0-1 machining solutions to supercharge the throughput and capabilities of our Factory. The team focuses on developing novel solutions for CNC programming, workholding, fixturing, tooling, process control, new materials, and machining capabilities. We are looking for an Applications Engineer to execute our Machining roadmap to scale Hadrian to be multi-factory across the US. You will work closely with Applications Engineering, CAM Operations, Software Engineering, and Robotics to push the boundaries of machining at scale and are looking to add a curious and self-motivated expert to join our already world class team. What You'll Do * Develop New Capabilities – push the limits of programming, machining, workholding, and automation to meet challenging market demands from our customers. * NPI Development – develop 0-1 New Product Introduction parts that are high-risk high-ROI as part of onboarding new customers or new technologies (techniques, materials, part families) . * Subject Matter Expert – as a Subject Matter Expert, you will contribute to the product vision of our Copilot software that super chargers our CAM programmers productivity. You will advise and consult across a range of areas within the factory such as tooling, machine selection, workholding, process engineering, etc. What We’re Looking For * CAM Programming – 5+ years programming aerospace parts * CNC Machine Operation – Ability to run and operate CNC machines including part setup, tool loading, tool offsets, spindle probing. * Machining Knowledge – Has applicable experience with a variety of machine types (mills, lathes), materials (alum, stainless, hard metals), tooling application, workholding, and fixture design. * Process Engineering – Has a track record of successfully machining difficult parts with stringent requirements. Understands the pitfalls of operation selection, material removal, tooling application, and material science. * GD&T – Strong understanding of GD&T and engineering print reading. * Communication– Excellent communication skills both written and verbal. What Will Set You Apart * Experience with hyperMILL, Heidenhain, Fanuc, NX, machining Inconel or Titanium, macro programming, mill-turn * Experience with tap testing, FEA analysis, load monitoring, tool life monitoring, in-process inspection * Strongly admired skills - Macro programming, software engineering skills, mechanical design, material science Compensation For this role, the target salary range is $130,000 - $220,000 (actual range may vary based on experience). This is the lowest to highest salary we reasonably and in good faith believe we would pay for this role at the time of this posting. We may ultimately pay more or less than the posted range, and the range may be modified in the future. An employee's pay position within the salary range will be based on several factors, including, but not limited to, relevant education, qualifications, certifications, experience, skills, geographic location, performance, and business or organizational needs. Benefits * Medical, dental, vision, and life insurance plans for employees * 401k * Relocation support may be provided for certain situations, based on business need. * Flexible vacation policy ITAR Requirements To conform to U.S. Government space technology export regulations, including the International Traffic in Arms Regulations (ITAR) you must be a U.S. citizen, lawful permanent resident of the U.S., protected individual as defined by 8 U.S.C. 1324b(a)(3), or eligible to obtain the required authorizations from the U.S. Department of State. Learn more about the ITAR here. Hadrian Is An Equal Opportunity Employer It is the Company’s policy to provide equal employment opportunity for all applicants and employees. The Company does not unlawfully discriminate on the basis of race inclusive of traits historically associated with race (including, but not limited to, hair texture and protective hairstyles, such as braids, locks and twists), color, religion, sex (including pregnancy, childbirth, or related medical conditions), gender identity, gender expression, transgender status, national origin (including, in California, possession of a drivers license), ancestry, citizenship, age, physical or mental disability, height or weight, medical condition, family care status, military or veteran status, marital status, domestic partner status, sexual orientation, genetic information, exercise of reproductive rights, any other basis protected by local, state, or federal laws, or any combination of the above characteristics. When necessary, the Company also makes reasonable accommodations for disabled candidates and employees, including for candidates or employees who are disabled by pregnancy, childbirth, or related medical conditions.

Job Description K2 is building the largest and highest-power satellites ever flown, unlocking performance levels previously out of reach across every orbit. Backed by $450M from leading investors including Altimeter Capital, Redpoint Ventures, T. Rowe Price, Lightspeed Venture Partners, Alpine Space Ventures, and others – with an additional $500M in signed contracts across commercial and US government customers – we're mass-producing the highest-power satellite platforms ever built for missions from LEO to deep space. The rise of heavy-lift launch vehicles is shifting the industry from an era of mass constraint to one of mass abundance, and we believe this new era demands a fundamentally different class of spacecraft. Engineered to survive the harshest radiation environments and to fully capitalize on today's and tomorrow's massive rockets, K2 satellites deliver unmatched capability at constellation scale and across multiple orbits. With multiple launches planned through 2026 and 2027, we're Building Bigger to develop the solar system and become a Kardashev Type II (K2) civilization. If you are a motivated individual who thrives in a fast-paced environment and you're excited about contributing to the success of a groundbreaking Series C space startup, we'd love for you to apply. The Role You will own the success of component and subsystem testing across structural, thermal, fluid, dynamic, and electromechanical systems. In your first 6 months, you will define development test campaigns, design and build test setups, and be hands-on with flight hardware. In your first year, you will validate designs through prototype testing and lead multidisciplinary test campaigns. In your first two years you will progressively take on larger tests while directly supporting production and qualification testing. Responsibilities • Own kickoff, design, fabrication, build, operation, data collection, and conclusion/results for development tests, • Design test hardware, fixturing, and tooling using CAD, FEA, and hand calculations, • Have a hands-on approach to activating test stands, operating test equipment, instrumentation, and executing tests in a safe and organized manner, • Troubleshoot performance issues and recommend solutions during test campaigns, • Clearly communicate technical data, findings, and recommendations to team members across all levels of the organization, • Bachelor's degree in mechanical, aerospace, or other relevant engineering discipline, • Experience with CAD or FEA software packages, • 2+ years of industry experience with mechanical, structural, and/or electromechanical design and analysis, • Experience designing, building, and testing mechanical assemblies and test fixtures for aerospace or terrestrial applications (satellite mechanical systems, payloads, launch vehicles, propulsion systems, and/or aircraft structures and mechanisms), • Experience with data acquisition, controls, and dedicated test equipment (examples include motor dynos, material testers, vibration tables, environmental data loggers, motorsports DAQ), • Experience with the practical application of GD&T, • Experience with NX (Unigraphics) and Teamcenter PLM, • Experience with performing structural analysis (Simcenter 3D, Femap, or Hypermesh), • Basic practical programming abilities (Python, MATLAB, Simulink, C++, R, LabVIEW), • Demonstrated ability to own mechanical hardware or systems within an integrated engineering team outside a classroom setting (High Power Rocketry, CubeSats, Robotics Competitions, Formula SAE and Baja SAE, Engineers without Borders, Design-Build-Fly, NASA student launch, personal entrepreneurial ventures, etc.), • Demonstrated understanding of structural analysis and failure modes of complex mechanical systems in space environments and operations, • Base salary range for this role is $100,000 - $140,000 + equity in the company, • Salary will be based on several factors including, but not limited to: knowledge and skills, education, and experience level If you need a reasonable accommodation as part of your application for employment or interviews with us, please let us know. Export Compliance As defined in the ITAR, "U.S. Persons" include U.S. citizens, lawful permanent residents (i.e., Green Card holders), and certain protected individuals (e.g., refugees/asylees, American Samoans). Please consult with a knowledgeable advisor if you are unsure whether you are a "U.S. Person." The person hired for this role will have access to information and items controlled by U.S. export control regulations, including the export control regulations outlined in the International Traffic in Arms Regulation (ITAR). The person hired for this role must therefore either be a "U.S. person" as defined by 22 C.F.R. § 120.15 or otherwise eligible for a federally issued export control license. Equal Opportunity K2 Space is an Equal Opportunity Employer; employment with K2 Space is governed on the basis of merit, competence and qualifications and will not be influenced in any manner by race, color, religion, gender, national origin/ethnicity, veteran status, disability status, age, sexual orientation, gender identity, marital status, mental or physical disability or any other legally protected status.

Job Description K2 is building the largest and highest-power satellites ever flown, unlocking performance levels previously out of reach across every orbit. Backed by $450M from leading investors including Altimeter Capital, Redpoint Ventures, T. Rowe Price, Lightspeed Venture Partners, Alpine Space Ventures, and others – with an additional $500M in signed contracts across commercial and US government customers – we're mass-producing the highest-power satellite platforms ever built for missions from LEO to deep space. The rise of heavy-lift launch vehicles is shifting the industry from an era of mass constraint to one of mass abundance, and we believe this new era demands a fundamentally different class of spacecraft. Engineered to survive the harshest radiation environments and to fully capitalize on today's and tomorrow's massive rockets, K2 satellites deliver unmatched capability at constellation scale and across multiple orbits. With multiple launches planned through 2026 and 2027, we're Building Bigger to develop the solar system and become a Kardashev Type II (K2) civilization. If you are a motivated individual who thrives in a fast-paced environment and you're excited about contributing to the success of a groundbreaking Series C space startup, we'd love for you to apply. Stay Connected with K2 Space for Future Job Openings Across Engineering We're on a mission to push the boundaries of what's possible in space systems and large-scale satellite platforms. Even when we don't have a specific opening listed, we're always eager to connect with innovators, builders, and problem-solvers who share our passion for making space more accessible. This is not a job application—it's a way for you to raise your hand and say, "Keep me in the loop." By joining our talent community, you'll: * Receive occasional updates about K2 Space projects, milestones, and future opportunities. * Be among the first to know when a role opens that might align with your skills and interests. * Stay engaged with our growing network of space enthusiasts and professionals. Who Should Join We welcome anyone excited about space technology and exploration—engineers, operators, mission designers, business minds, creatives, and everyone in between—who want to be part of K2 Space's journey. How to Join * Fill out our brief interest form below. * Share a resume and a quick note about your skills, passions, or areas of interest. * We'll keep you on our radar for future opportunities and updates. If you don't meet 100% of the preferred skills and experience, we encourage you to still apply! Building a spacecraft unlike any other requires a team unlike any other and non-traditional career twists and turns are encouraged! If you need a reasonable accommodation as part of your application for employment or interviews with us, please let us know. Export Compliance As defined in the ITAR, "U.S. Persons" include U.S. citizens, lawful permanent residents (i.e., Green Card holders), and certain protected individuals (e.g., refugees/asylees, American Samoans). Please consult with a knowledgeable advisor if you are unsure whether you are a "U.S. Person." The person hired for this role will have access to information and items controlled by U.S. export control regulations, including the export control regulations outlined in the International Traffic in Arms Regulation (ITAR). The person hired for this role must therefore either be a "U.S. person" as defined by 22 C.F.R. § 120.15 or otherwise eligible for a federally issued export control license. Equal Opportunity K2 Space is an Equal Opportunity Employer; employment with K2 Space is governed on the basis of merit, competence and qualifications and will not be influenced in any manner by race, color, religion, gender, national origin/ethnicity, veteran status, disability status, age, sexual orientation, gender identity, marital status, mental or physical disability or any other legally protected status.

Job Description Hadrian - Manufacturing the Future Hadrian is building autonomous factories that help aerospace and defense companies manufacture rockets, satellites, jets, and ships up to 10x faster and up to 2x cheaper. By combining advanced software, robotics, and full-stack manufacturing, we are reinventing how America produces its most critical parts. We’re accelerating our mission with the launch of Factory 3 in Mesa, Arizona, a 290,000-square-foot facility creating 350 new jobs. We are expanding rapidly to support thousands of future hires, launching Hadrian Maritime to expand into naval production, and introducing a Factory-as-a-Service model that delivers complete systems instead of individual parts. Hadrian is backed by leading investors including T. Rowe Price, Lux Capital, Founders Fund, and Andreessen Horowitz, our fast-growing team is united around reindustrializing American manufacturing for the 21st century and beyond. The Role Hadrian is building the next generation of automated precision manufacturing, and supplier quality is critical to delivering reliable, high-performance parts at scale. As a Supplier Quality Engineer, you will build and operate key components of Hadrian’s supplier quality program. You will define how supplier quality documentation is reviewed and approved prior to shipment, conduct supplier audits, manage corrective actions, and drive continuous improvement across Hadrian’s Approved Supplier List (ASL). This role works closely with engineering, operations, strategic sourcing and product teams to ensure supplier quality processes scale with the business and are supported by internal software tools and digital workflows. What You’ll Do * Define and implement processes for reviewing supplier quality documentation (E-Certs, FAIRs, material certifications, dimensional inspection reports) prior to shipment approval. * Conduct supplier audits (virtual and in-person) to assess capability and ensure compliance with industry (AS9100/NADCAP) and customer quality standards. * Lead supplier corrective action processes (SCARs), including root cause investigations and resolution of quality escapes. * Manage Hadrian’s ASL, monitoring approval status and performance. * Evaluate and onboard new suppliers through capability assessments, qualification audits, and ongoing performance monitoring. * Analyze supplier quality and delivery performance metrics to identify trends and drive supplier improvement initiatives. What We’re Looking For * 4+ years of experience in manufacturing, supplier quality, or inspection of mechanical products in a production environment. * Strong understanding of machining processes, GD&T, and precision manufacturing quality requirements. * Experience reviewing quality documentation such as FAIRs, material certifications, and dimensional inspection reports. * Experience conducting supplier audits or evaluating supplier capabilities. * Ability to lead root cause investigations and implement corrective and preventive actions. What Will Set You Apart * Experience working with AS9100 or ISO 9001 quality management systems. * Familiarity with PPAP and structured supplier qualification processes. * Certification in supplier or quality auditing. * Experience collaborating with product or software teams to build digital quality workflows or internal quality tools. * Familiarity with Six Sigma methodologies or statistical quality tools. Compensation and Benefits For this role, the target salary range is $100,000 - $160,000 (actual range may vary based on experience). This is the lowest to highest salary we reasonably and in good faith believe we would pay for this role at the time of this posting. We may ultimately pay more or less than the posted range, and the range may be modified in the future. An employee’s pay position within the salary range will be based on several factors including, but not limited to, relevant education, qualifications, certifications, experience, skills, geographic location, performance, and business or organizational needs. Benefits * Medical, dental, vision, and life insurance plans for employees * 401k * Relocation support may be provided for certain situations, based on business need. * Flexible vacation policy ITAR Requirements To conform to U.S. Government space technology export regulations, including the International Traffic in Arms Regulations (ITAR) you must be a U.S. citizen, lawful permanent resident of the U.S., protected individual as defined by 8 U.S.C. 1324b(a)(3), or eligible to obtain the required authorizations from the U.S. Department of State. Learn more about the ITAR here. Hadrian Is An Equal Opportunity Employer It is the Company’s policy to provide equal employment opportunity for all applicants and employees. The Company does not unlawfully discriminate on the basis of race inclusive of traits historically associated with race (including, but not limited to, hair texture and protective hairstyles, such as braids, locks and twists), color, religion, sex (including pregnancy, childbirth, or related medical conditions), gender identity, gender expression, transgender status, national origin (including, in California, possession of a drivers license), ancestry, citizenship, age, physical or mental disability, height or weight, medical condition, family care status, military or veteran status, marital status, domestic partner status, sexual orientation, genetic information, exercise of reproductive rights, any other basis protected by local, state, or federal laws, or any combination of the above characteristics. When necessary, the Company also makes reasonable accommodations for disabled candidates and employees, including for candidates or employees who are disabled by pregnancy, childbirth, or related medical conditions.

Job Description K2 is building the largest and highest-power satellites ever flown, unlocking performance levels previously out of reach across every orbit. Backed by $450M from leading investors including Altimeter Capital, Redpoint Ventures, T. Rowe Price, Lightspeed Venture Partners, Alpine Space Ventures, and others – with an additional $500M in signed contracts across commercial and US government customers – we're mass-producing the highest-power satellite platforms ever built for missions from LEO to deep space. The rise of heavy-lift launch vehicles is shifting the industry from an era of mass constraint to one of mass abundance, and we believe this new era demands a fundamentally different class of spacecraft. Engineered to survive the harshest radiation environments and to fully capitalize on today's and tomorrow's massive rockets, K2 satellites deliver unmatched capability at constellation scale and across multiple orbits. With multiple launches planned through 2026 and 2027, we're Building Bigger to develop the solar system and become a Kardashev Type II (K2) civilization. If you are a motivated individual who thrives in a fast-paced environment and you're excited about contributing to the success of a groundbreaking Series C space startup, we'd love for you to apply. The Role As a Power Systems Engineer at K2, you'll develop and test the high-fidelity electrical system models that ensure our high voltage, high power system behaves predictably and reliably. In this role you'll dive deep into the first principles of power systems, from creating full-fidelity SPICE models of power system parasitics and dynamics to validating and tuning these models against reality. Your work will guide key architectural decisions: how power flows through the spacecraft, how faults are isolated, how filters are sized for EMI compatibility, and how the system operates reliably through worst-case faults. If you enjoy hands‑on investigation, and you want to influence the core architecture of next‑generation spacecraft power systems, this is the place to be. Responsibilities • Develop SPICE representations and models to evaluate power system parasitics, like battery impedance, harness reactance, and filters, • Plan and execute test campaigns to validate these models against reality, • Bachelor's degree in Electrical Engineering, Physics, or related discipline, • 1+ years working in Avionics Systems, Electrical Power Systems, Electrical Hardware Design, or similar role, • Strong capability to independently reason through designing for fault tolerance and reliability, • Familiarity with failure modes and effects analysis (FMEA), • Experience working with LTSpice or similar SPICE simulator, • Experience writing software in Python, Rust or other language for test automation, • Ability to perform impedance measurements and loop gain measurements, • Base salary range for this role is $100,000 - $150,000 + equity in the company, • Salary will be based on several factors including, but not limited to: knowledge and skills, education, and experience level If you need a reasonable accommodation as part of your application for employment or interviews with us, please let us know. Export Compliance As defined in the ITAR, "U.S. Persons" include U.S. citizens, lawful permanent residents (i.e., Green Card holders), and certain protected individuals (e.g., refugees/asylees, American Samoans). Please consult with a knowledgeable advisor if you are unsure whether you are a "U.S. Person." The person hired for this role will have access to information and items controlled by U.S. export control regulations, including the export control regulations outlined in the International Traffic in Arms Regulation (ITAR). The person hired for this role must therefore either be a "U.S. person" as defined by 22 C.F.R. § 120.15 or otherwise eligible for a federally issued export control license. Equal Opportunity K2 Space is an Equal Opportunity Employer; employment with K2 Space is governed on the basis of merit, competence and qualifications and will not be influenced in any manner by race, color, religion, gender, national origin/ethnicity, veteran status, disability status, age, sexual orientation, gender identity, marital status, mental or physical disability or any other legally protected status.

Job Description K2 is building the largest and highest-power satellites ever flown, unlocking performance levels previously out of reach across every orbit. Backed by $450M from leading investors including Altimeter Capital, Redpoint Ventures, T. Rowe Price, Lightspeed Venture Partners, Alpine Space Ventures, and others – with an additional $500M in signed contracts across commercial and US government customers – we're mass-producing the highest-power satellite platforms ever built for missions from LEO to deep space. The rise of heavy-lift launch vehicles is shifting the industry from an era of mass constraint to one of mass abundance, and we believe this new era demands a fundamentally different class of spacecraft. Engineered to survive the harshest radiation environments and to fully capitalize on today's and tomorrow's massive rockets, K2 satellites deliver unmatched capability at constellation scale and across multiple orbits. With multiple launches planned through 2026 and 2027, we're Building Bigger to develop the solar system and become a Kardashev Type II (K2) civilization. If you are a motivated individual who thrives in a fast-paced environment and you're excited about contributing to the success of a groundbreaking Series C space startup, we'd love for you to apply. The Role You will own the success of mechanical structures, mechanisms, and electromechanical subsystems that will be key to our satellite operation. In your first 6 months, you will define product requirements, create initial concepts and trades, perform preliminary and detailed analysis, define development test campaigns, and produce development hardware. In your first year, you will validate your designs through prototype iterations and build and qualify flight hardware. In your first two years you will progressively take on larger scope sub-systems while directly supporting production and integration. Responsibilities • Take satellite mechanical hardware and mechanisms from conceptual design through qualification to on-orbit operations in order to support internal and external customer needs, • Lead satellite subsystem design reviews from kickoff through qualification and beyond, • Drive hardware development, including hands-on development testing, analysis correlation, and follow-on hardware iterations, • Perform hardware trades that steer both sub-system and top-level product direction, • Collaborate with a cross-functional team to establish product requirements, company processes, and best practices for hardware design and manufacturing, • Bachelor's degree in mechanical, aerospace, or other relevant engineering discipline, • Experience with CAD or FEA software packages, • Experience with the practical application of GD&T, • Experience designing, building, and testing mechanical assemblies for aerospace applications (satellite mechanical systems, payloads, launch vehicles, propulsion systems, and/or aircraft structures and mechanisms), • Demonstrated ability to own mechanical hardware or systems within an integrated engineering team outside a classroom setting (High Power Rocketry, CubeSats, Robotics Competitions, Formula SAE and Baja SAE, Engineers without Borders, Design-Build-Fly, NASA student launch, personal entrepreneurial ventures, etc.), • Demonstrated understanding of structural analysis and failure modes of complex mechanical systems in space environments and operations, • Base salary range for this role is $90,000 - $140,000 + equity in the company, • Salary will be based on several factors including, but not limited to: knowledge and skills, education, and experience level If you need a reasonable accommodation as part of your application for employment or interviews with us, please let us know. Export Compliance As defined in the ITAR, "U.S. Persons" include U.S. citizens, lawful permanent residents (i.e., Green Card holders), and certain protected individuals (e.g., refugees/asylees, American Samoans). Please consult with a knowledgeable advisor if you are unsure whether you are a "U.S. Person." The person hired for this role will have access to information and items controlled by U.S. export control regulations, including the export control regulations outlined in the International Traffic in Arms Regulation (ITAR). The person hired for this role must therefore either be a "U.S. person" as defined by 22 C.F.R. § 120.15 or otherwise eligible for a federally issued export control license. Equal Opportunity K2 Space is an Equal Opportunity Employer; employment with K2 Space is governed on the basis of merit, competence and qualifications and will not be influenced in any manner by race, color, religion, gender, national origin/ethnicity, veteran status, disability status, age, sexual orientation, gender identity, marital status, mental or physical disability or any other legally protected status.

Job Description K2 is building the largest and highest-power satellites ever flown, unlocking performance levels previously out of reach across every orbit. Backed by $450M from leading investors including Altimeter Capital, Redpoint Ventures, T. Rowe Price, Lightspeed Venture Partners, Alpine Space Ventures, and others – with an additional $500M in signed contracts across commercial and US government customers – we're mass-producing the highest-power satellite platforms ever built for missions from LEO to deep space. The rise of heavy-lift launch vehicles is shifting the industry from an era of mass constraint to one of mass abundance, and we believe this new era demands a fundamentally different class of spacecraft. Engineered to survive the harshest radiation environments and to fully capitalize on today's and tomorrow's massive rockets, K2 satellites deliver unmatched capability at constellation scale and across multiple orbits. With multiple launches planned through 2026 and 2027, we're Building Bigger to develop the solar system and become a Kardashev Type II (K2) civilization. If you are a motivated individual who thrives in a fast-paced environment and you're excited about contributing to the success of a groundbreaking Series C space startup, we'd love for you to apply. The Role You will own the success of the mechanical structures and mechanisms that will be key to our satellite operation. In your first 6 months, you will define mechanical requirements, create initial concepts and trades, perform preliminary and detailed analysis, define development test campaigns, trade and select any purchased electromechanical subsystems, and produce development hardware. In your first year, you will validate your designs through prototype iterations and build and qualify flight hardware. In your first two years you will fly your hardware in space while directly supporting production and integration. Responsibilities * Take hardware and mechanisms from conceptual design through qualification to on-orbit operations in order to support internal and external customer needs * Lead design reviews from kickoff through qualification and beyond * Drive hardware development, including hands-on development testing, analysis correlation, and follow-on hardware iterations * Perform hardware trades that steer both sub-system and top-level product direction * Collaborate with a cross-functional team to establish product requirements, company processes, and best practices for hardware design and manufacturing * Continually own and refine system deliverables and associated schedules throughout development and production Qualifications * Bachelor's degree in mechanical, aerospace, or other relevant engineering discipline * 5+ years of experience with mechanical and/or electromechanical design and analysis * Experience with CAD or FEA software packages * Experience with the practical application of GD&T * Demonstrated proficiency in the principles of mechanical design, materials, thermodynamics, and fluids * Demonstrated ability to personally design, build, and test hardware from a blank canvas, including troubleshooting and iterating designs based on downstream feedback Nice to Have * Experience designing, building, and testing moving mechanical assemblies for aerospace applications (satellite mechanical systems, payloads, launch vehicles, propulsion systems, and/or aircraft structures and mechanisms) * Experience with NASA-STD-5017, SMC-S-016, and GSFC-STD-7000 for the design and qualification of in-space Moving Mechanism Assemblies * Demonstrated ability to own mechanical hardware or systems within an integrated engineering team outside a classroom setting * Demonstrated understanding of structural analysis and failure modes of complex mechanical systems in space environments and operations * Independent and self-motivated mindset, with strong organizational, written, and oral communication skills Compensation and Benefits: * Base salary range for this role is $140,000 – $175,000 + equity in the company * Salary and level will be based on several factors including, but not limited to: knowledge and skills, education, and experience level * Comprehensive benefits package including paid time off, medical/dental/vision coverage, life insurance, paid parental leave, and many other perks If you don't meet 100% of the preferred skills and experience, we encourage you to still apply! Building a spacecraft unlike any other requires a team unlike any other and non-traditional career twists and turns are encouraged! If you need a reasonable accommodation as part of your application for employment or interviews with us, please let us know. Export Compliance As defined in the ITAR, "U.S. Persons" include U.S. citizens, lawful permanent residents (i.e., Green Card holders), and certain protected individuals (e.g., refugees/asylees, American Samoans). Please consult with a knowledgeable advisor if you are unsure whether you are a "U.S. Person." The person hired for this role will have access to information and items controlled by U.S. export control regulations, including the export control regulations outlined in the International Traffic in Arms Regulation (ITAR). The person hired for this role must therefore either be a "U.S. person" as defined by 22 C.F.R. § 120.15 or otherwise eligible for a federally issued export control license. Equal Opportunity K2 Space is an Equal Opportunity Employer; employment with K2 Space is governed on the basis of merit, competence and qualifications and will not be influenced in any manner by race, color, religion, gender, national origin/ethnicity, veteran status, disability status, age, sexual orientation, gender identity, marital status, mental or physical disability or any other legally protected status.

Job Description Hadrian - Manufacturing the Future Hadrian is building autonomous factories that help aerospace and defense companies manufacture rockets, satellites, jets, and ships up to 10x faster and up to 2x cheaper. By combining advanced software, robotics, and full-stack manufacturing, we are reinventing how America produces its most critical parts. We’re accelerating our mission with the launch of Factory 3 in Mesa, Arizona, a 290,000-square-foot facility creating 350 new jobs. We are expanding rapidly to support thousands of future hires, launching Hadrian Maritime to expand into naval production, and introducing a Factory-as-a-Service model that delivers complete systems instead of individual parts. Hadrian is backed by leading investors including T. Rowe Price, Lux Capital, Founders Fund, and Andreessen Horowitz, our fast-growing team is united around reindustrializing American manufacturing for the 21st century and beyond. The Role As a foundational software engineer on our data platform engineering team, you will lead the charge on building the AI and data infrastructure that powers Hadrian's autonomous factories. This means writing software to aggregate, store, and make sense of data — and building the intelligent systems that sit on top of it. Examples of possible work include building RAG pipelines and vector search systems that give our AI models access to the right manufacturing knowledge at the right time, developing MLOps infrastructure to deploy and monitor production models, building software agents to get data off of machines, and creating certified datasets that enable operations research, machine intelligence, and business analytics at scale. You will be challenged to think creatively and solve complex data and AI integration problems. You will work cross functionally with production experts, operations research scientists, software engineers, and machining specialists to develop novel solutions working toward fully automated factories. What You'll Do * Scope, architect, implement, and deploy critical AI and data infrastructure applications that will drive revenue and make a positive impact in the world. * Build and own RAG pipelines and vector search systems that enable intelligent retrieval of manufacturing knowledge across Hadrian's data estate. * Design and manage MLOps infrastructure — training pipelines, model deployment, monitoring, and orchestration — so that ML and operations research models run reliably in production. * Build and manage a robust data warehouse and write software to coordinate and deploy data pipelines. * Conceptualize and own the data architecture for multiple large-scale projects. * Create and contribute to data frameworks that span on-premises and cloud infrastructure, improving the efficacy of logging machine data, while working with data infrastructure to triage issues and resolve. * Solve our most challenging machine data and AI integration problems, utilizing optimal ETL patterns, frameworks, query techniques, and retrieval architectures sourcing from structured and unstructured data sources. * Collaborate with machine engineers, operations research scientists, product managers, and data scientists to understand data and AI needs, translating complex systems into tools people actually use. * Get to build alongside an incredible team of software engineers, mechanical engineers, operators, and the best machinists/CAM programmers in the world. What We're Looking For * Have extensive experience shipping modern, data-centric applications (our data systems use Argo-Workflows, Dagster, Superset, Aurora, RDS, S3, and back-ends are Go and Python, with gRPC/Avro and Kafka as our messaging platform). * Experience building AI infrastructure in production: RAG pipelines, vector databases (such as Pinecone, Weaviate, Chroma, or equivalent), embedding systems, or semantic search. * Hands-on MLOps experience: owning the full lifecycle of ML models from training through deployment and monitoring (SageMaker, Ray, MLflow, or equivalent). * Have experience with IaC and GitOps tooling (We use Terraform extensively and have centralized on Kubernetes/Argo/Helm). * Extremely well versed with data querying techniques across NoSQL and SQL platforms. * Have a Bachelor's degree in Computer Science and/or equivalent experience. * Solid understanding in building data architecture and pipelines. * Are self-motivated and eager to get hands-on and tackle challenges independently while working collaboratively toward identified objectives. * Work with a platform mentality -- driven to find the right architecture and plan up front and solve problems with the long term in mind. * Take responsibility and ownership finding solutions no matter what. * Deploy your broad experience and big picture view to fix undreamed of problems with innovative solutions. * Feel passionate about making things move in the real world with software. * Are excited to work in a fast-paced environment with high-stakes and quick iteration cycles. * Are a highly effective communicator when speaking or writing, especially when presenting technical information. Compensation For this role, the target salary range is $120,000 - $200,000 (actual range may vary based on experience). This is the lowest to highest salary we reasonably and in good faith believe we would pay for this role at the time of this posting. We may ultimately pay more or less than the posted range, and the range may be modified in the future. An employee's pay position within the salary range will be based on several factors, including, but not limited to, relevant education, qualifications, certifications, experience, skills, geographic location, performance, and business or organizational needs. Benefits * Medical, dental, vision, and life insurance plans for employees * 401k * Relocation support may be provided for certain situations, based on business need. * Flexible vacation policy ITAR Requirements To conform to U.S. Government space technology export regulations, including the International Traffic in Arms Regulations (ITAR) you must be a U.S. citizen, lawful permanent resident of the U.S., protected individual as defined by 8 U.S.C. 1324b(a)(3), or eligible to obtain the required authorizations from the U.S. Department of State. Learn more about the ITAR here. Hadrian Is An Equal Opportunity Employer It is the Company’s policy to provide equal employment opportunity for all applicants and employees. The Company does not unlawfully discriminate on the basis of race inclusive of traits historically associated with race (including, but not limited to, hair texture and protective hairstyles, such as braids, locks and twists), color, religion, sex (including pregnancy, childbirth, or related medical conditions), gender identity, gender expression, transgender status, national origin (including, in California, possession of a drivers license), ancestry, citizenship, age, physical or mental disability, height or weight, medical condition, family care status, military or veteran status, marital status, domestic partner status, sexual orientation, genetic information, exercise of reproductive rights, any other basis protected by local, state, or federal laws, or any combination of the above characteristics. When necessary, the Company also makes reasonable accommodations for disabled candidates and employees, including for candidates or employees who are disabled by pregnancy, childbirth, or related medical conditions.

Job Description Aflac, an esteemed leader in the insurance industry, is actively seeking a dynamic candidate to join our distinguished team. This role presents an exceptional opportunity in the Business-to-Business sector, boasting a highly lucrative compensation structure and flexible scheduling that prioritizes work-life balance and career development. Check out more about us at: @dtlametroregion on Instagram As an Associate at Aflac, you will be entrusted with contributing to our esteemed sales environment with enthusiasm, dedication, and a drive for success. This role offers an immersive experience in professional benefits education, coupled with the potential for rapid career growth and advancement opportunities. Our Benefit Specialists play a crucial role in educating our clients' employees. They will assist with presentations, provide in-person customer service, and help individuals understand their employer provided benefits packages. In this role your primary responsibility is to serve as a valuable resource to all clients and their employees. We are looking for candidates who have: -1–3 years of experience in Customer Service or Client Services -Experience in the Healthcare or Insurance industry (preferred) -A desire to grow within their company, potentially seeking management roles in the future -Strong presentation and communication skills -Proficiency with Microsoft Excel, Word, Documents, Slides, and related tools -Ability to quickly learn and adapt to new online CRM or ATS systems Our comprehensive Fortune 500 Corporate Training that is supplemented by the esteemed Aflac Flight Academy's world-class program, equips all team members with the necessary skills for success. Additionally, qualified candidates will have access to extensive management and leadership training within our mentorship model. We are seeking individuals who embody ambition, integrity, and a commitment to excellence. If you are ready to embark on a rewarding career path with unparalleled earning potential and professional development, we encourage you to apply and become part of our team! This is a prestigious employment opportunity that requires a two step interview process. If you are unable to commit to multiple interviews, please do not apply. This is not a salaried position as our Aflac associates earn commissions, bonuses, residual income, and stock. Aflac associates are independent agents and are not Aflac employees. Aflac’s family of insurers includes Aflac and/or Aflac New York, and/or Continental American Insurance Company and/or Continental American Life Insurance Company. Type: Full or Part Time Pay Range: 50-80K Yearly Hybrid Work Schedule wth Flexibility

Job Description Overview Ansible Government Solutions, LLC (Ansible) is currently recruiting for Computed Tomography (CT) Technologists to support the VA Long Beach Healthcare System (Tibor Rubin VA Medical Center) located at 5901 East 7th St Long Beach, CA 90822. Available shift schedules include days, evenings, and nights. If you accept employment with Ansible, you must also acknowledge that any assigned schedule is subject to change at the direction of either Ansible or its customers. Ansible is a Service-Disabled Veteran-Owned Small Business (SDVOSB) providing Federal customers with solutions in many arenas. Our customers face wide-ranging challenges in the fields of national security, health care, and information technology. To address these challenges, we employ intelligent and committed staff who take care of our customers’ success as if it is their own. Responsibilities • Performs imaging of the head, neck, spine, chest, extremities, vascular system, and body, • Sets up radiographic suites and ensures that sterile supplies, contrast materials, catheters, and other required equipment/supplies are present and available, • Prepares and administers contrast material orally, by enema, or under close supervision of radiologists, intravenously but not independently; as required by procedure or patient’s condition, monitors vital signs (blood pressure and heart rate), and reports any significant changes to a radiologist, • Lifts, positions, pushes, and transfers patients, supplies, and/or equipment as needed, • Performs related clerical duties such as sending images to PACS, archiving images, and case editing of computer requests and reports, • English language proficiency, • ARRT(CT) certified (required), • Graduate of an accredited Joint Review Committee on Education of Radiologic Technologists (JRCERT) program, and have a minimum of two (2) years of work experience, • Note - Student internship and training time spent in a radiology setting does not count toward the two (2) years of experience, • Experience with Picture Archiving Communication System (PACS), experience with Agfa PACS is preferred but not required, • Sit, stand, walk, lift, squat, bend, twist, and reach above shoulders during the work shift, • Lift up to 50 lbs from floor to waist, • Lift up to 20 lbs, • Carry up to 40 lbs a reasonable distance Powered by JazzHR eHENTmbXQ2

Job Description Overview Ansible Government Solutions, LLC (Ansible) is currently recruiting for Ultrasound (US) Technologists to support the VA Greater Los Angeles Healthcare System located at 11301 Wilshire Boulevard, Los Angeles, CA 90073, and potentially at any of its surrounding clinics. Ultrasound Technologists shall have in depth knowledge of ultrasound scanning and optimizing examination potential. The technologists shall collect and communicate all pertinent clinical information to the Radiologist. The technologists shall explain exams to the patients as well as proper patient preparation requirements. The technologists shall also work closely with other department technologists and continue quality improvement activities on a daily basis. Available shift schedules include days, evenings, and nights. If you accept employment with Ansible, you must also acknowledge that any assigned schedule is subject to change at the direction of either Ansible or its customers. Exceptional compensation and benefits packages are available to qualified candidates. Ansible is a Service-Disabled Veteran-Owned Small Business (SDVOSB) providing Federal customers with solutions in many arenas. Our customers face wide-ranging challenges in the fields of national security, health care, and information technology. To address these challenges, we employ intelligent and committed staff who take care of our customers’ success as if it is their own. Responsibilities • Maintains in depth knowledge of ultrasound scanning and optimizing examination potential, • Collects and communicates all pertinent clinical information to the Radiologist, • Explains exams to the patients as well as proper patient preparation requirements, • Works closely with other department technologists and continues quality improvement activities on a daily basis, • Sets up radiographic suites and ensures that sterile supplies, contrast materials, catheters, and other required equipment/supplies are present and available, • Prepares and administers contrast material orally, by enema, or under close supervision of radiologists, intravenously but not independently; as required by procedure or patient’s condition, monitors vital signs (blood pressure and heart rate), and reports any significant changes to a radiologist, • Lifts, positions, pushes, and transfers patients, supplies, and/or equipment as needed, • Performs related clerical duties such as sending images to PACS, archiving images, and case editing of computer requests and reports, • English language proficiency, • Registered or registry eligible in Sonography by the American Registry for Diagnostic Medical Sonographers (ARDMS), shall have a minimum of two (2) years of work experience in the specialized modality and shall be able to work with minimal or no supervision, • Note - Student internship and training time spent in a radiology setting does not count toward the two (2) years of experience, • Experience with Picture Archiving Communication System (PACS), experience with Agfa PACS is preferred but not required, • American Heart Association (AHA) Basic Life Support (BLS) certification is required All candidates must be able to: • Sit, stand, walk, lift, squat, bend, twist, and reach above shoulders during the work shift, • Lift up to 50 lbs from floor to waist, • Lift up to 20 lbs, • Carry up to 40 lbs a reasonable distance Powered by JazzHR kdLpiV4HvX

Job Description K2 is building the largest and highest-power satellites ever flown, unlocking performance levels previously out of reach across every orbit. Backed by $450M from leading investors including Altimeter Capital, Redpoint Ventures, T. Rowe Price, Lightspeed Venture Partners, Alpine Space Ventures, and others – with an additional $500M in signed contracts across commercial and US government customers – we're mass-producing the highest-power satellite platforms ever built for missions from LEO to deep space. The rise of heavy-lift launch vehicles is shifting the industry from an era of mass constraint to one of mass abundance, and we believe this new era demands a fundamentally different class of spacecraft. Engineered to survive the harshest radiation environments and to fully capitalize on today's and tomorrow's massive rockets, K2 satellites deliver unmatched capability at constellation scale and across multiple orbits. With multiple launches planned through 2026 and 2027, we're Building Bigger to develop the solar system and become a Kardashev Type II (K2) civilization. If you are a motivated individual who thrives in a fast-paced environment and you're excited about contributing to the success of a groundbreaking Series C space startup, we'd love for you to apply. The Role You will own the success of custom tooling and structures that will be key to our satellite production. In your first 6 months, you will learn the satellite structure tooling needs, design and build tooling, and be hands-on with flight hardware. In your first year, you will validate your tooling through manufacture, testing, and production material handling. In your first two years you will progressively take on larger tooling projects while directly supporting production, qualification testing, and flight hardware development. Responsibilities • Design and fabricate tooling and material handling systems for K2 Space satellite bus and associated systems and subsystems, • Lead development of satellite subsystem production fixtures from project kickoff through production and beyond, • Drive hands-on development tooling development, sizing and structural analysis of ground support equipment, and continuous improvement of tooling and production operations, • Support the development of ground test setups, flight hardware, development fixtures, and external customer tooling needs, • Bachelor's degree in mechanical, aerospace, or other relevant engineering discipline, • Experience with CAD or FEA software packages (experience can be in a professional, academic, entrepreneurial, or hobby setting), • 1+ years of industry experience with mechanical and/or electromechanical design and analysis, • Hands-on fabrication experience, • Experience with shipping, materials handling, and clean room operations, • Experience with the practical application of GD&T, • Experience with NX (Unigraphics) and Teamcenter PLM, • Experience with performing structural analysis (Simcenter 3D, Femap, or Hypermesh), • Demonstrated ability to own mechanical hardware or systems within an integrated engineering team outside a classroom setting (High Power Rocketry, CubeSats, Robotics Competitions, Formula SAE and Baja SAE, Engineers without Borders, Design-Build-Fly, NASA student launch, personal entrepreneurial ventures, etc.), • Demonstrated understanding of structural analysis and failure modes of complex mechanical systems in space environments and operations, • Experience with actuators, controls, data acquisition, and dedicated test or automation equipment (examples include actuated positioning tools, motor dynos, vibration tables, environmental data loggers, motorsports DAQ), • Base salary range for this role is $90,000 - $140,000 + equity in the company, • Salary will be based on several factors including, but not limited to: knowledge and skills, education, and experience level If you need a reasonable accommodation as part of your application for employment or interviews with us, please let us know. Export Compliance As defined in the ITAR, "U.S. Persons" include U.S. citizens, lawful permanent residents (i.e., Green Card holders), and certain protected individuals (e.g., refugees/asylees, American Samoans). Please consult with a knowledgeable advisor if you are unsure whether you are a "U.S. Person." The person hired for this role will have access to information and items controlled by U.S. export control regulations, including the export control regulations outlined in the International Traffic in Arms Regulation (ITAR). The person hired for this role must therefore either be a "U.S. person" as defined by 22 C.F.R. § 120.15 or otherwise eligible for a federally issued export control license. Equal Opportunity K2 Space is an Equal Opportunity Employer; employment with K2 Space is governed on the basis of merit, competence and qualifications and will not be influenced in any manner by race, color, religion, gender, national origin/ethnicity, veteran status, disability status, age, sexual orientation, gender identity, marital status, mental or physical disability or any other legally protected status.

Job Description K2 is building the largest and highest-power satellites ever flown, unlocking performance levels previously out of reach across every orbit. Backed by $450M from leading investors including Altimeter Capital, Redpoint Ventures, T. Rowe Price, Lightspeed Venture Partners, Alpine Space Ventures, and others – with an additional $500M in signed contracts across commercial and US government customers – we're mass-producing the highest-power satellite platforms ever built for missions from LEO to deep space. The rise of heavy-lift launch vehicles is shifting the industry from an era of mass constraint to one of mass abundance, and we believe this new era demands a fundamentally different class of spacecraft. Engineered to survive the harshest radiation environments and to fully capitalize on today's and tomorrow's massive rockets, K2 satellites deliver unmatched capability at constellation scale and across multiple orbits. With multiple launches planned through 2026 and 2027, we're Building Bigger to develop the solar system and become a Kardashev Type II (K2) civilization. If you are a motivated individual who thrives in a fast-paced environment and you're excited about contributing to the success of a groundbreaking Series C space startup, we'd love for you to apply. The Role We are seeking a Senior Embedded Software Engineer to develop and enhance low‑level embedded software across the satellite platform. As a Senior Embedded Software Engineer, you'll work closely with custom hardware to develop low-level software that brings our spacecraft to life. From initial hardware bring-up through fully integrated, flight-ready systems. You'll build embedded software that interfaces directly with sensors, actuators, and critical spacecraft subsystems, including propulsion, attitude control, and power. Your work will primarily be written in Rust and deployed on microcontrollers across our platform, requiring strong fundamentals in real-time systems, resource-constrained environments, and fault-tolerant design. Responsibilities • Create embedded software architecture for real-time, fault tolerant control of a 20kW+ spacecraft., • Develop embedded software for new hardware integrated throughout the satellite., • Extend embedded software applications for managing hardware on some of the largest satellites that have ever flown., • Scale embedded software across different satellite products by building software infrastructure and development processes., • Debug complex HW/FW issues using traditional debug tools (JTAG/SWD, logic analyzers, oscilloscopes), and custom debug hooks both on the ground and in orbiting satellites., • 5+ years of experience developing embedded software in either Rust, C, or C++, targeting microcontrollers (ARM, RISC-V, or similar)., • Strong understanding of your favorite microcontroller's memory subsystem, instruction pipeline, interrupt and DMA controller., • Experience collaborating with hardware engineering teams., • Experience using Rust in hard real-time systems, either bare-metal or RTOS environments., • Experience developing peripheral drivers without use of the vendor's software., • Experience with spacecraft flight software development., • Experience maintaining embedded software across multiple product revisions., • Experience with software verification and testing methods., • Experience with software and network performance analysis and debugging., • Experience with fault tolerant software design and implementation., • Base salary range for this role is $160,000 - $220,000 + equity in the company, • Salary will be based on several factors including, but not limited to knowledge and skills, education, and experience level If you need a reasonable accommodation as part of your application for employment or interviews with us, please let us know. Export Compliance As defined in the ITAR, "U.S. Persons" include U.S. citizens, lawful permanent residents (i.e., Green Card holders), and certain protected individuals (e.g., refugees/asylees, American Samoans). Please consult with a knowledgeable advisor if you are unsure whether you are a "U.S. Person." The person hired for this role will have access to information and items controlled by U.S. export control regulations, including the export control regulations outlined in the International Traffic in Arms Regulation (ITAR). The person hired for this role must therefore either be a "U.S. person" as defined by 22 C.F.R. § 120.15 or otherwise eligible for a federally issued export control license. Equal Opportunity K2 Space is an Equal Opportunity Employer; employment with K2 Space is governed on the basis of merit, competence and qualifications and will not be influenced in any manner by race, color, religion, gender, national origin/ethnicity, veteran status, disability status, age, sexual orientation, gender identity, marital status, mental or physical disability or any other legally protected status.

Job Description K2 is building the largest and highest-power satellites ever flown, unlocking performance levels previously out of reach across every orbit. Backed by $450M from leading investors including Altimeter Capital, Redpoint Ventures, T. Rowe Price, Lightspeed Venture Partners, Alpine Space Ventures, and others – with an additional $500M in signed contracts across commercial and US government customers – we're mass-producing the highest-power satellite platforms ever built for missions from LEO to deep space. The rise of heavy-lift launch vehicles is shifting the industry from an era of mass constraint to one of mass abundance, and we believe this new era demands a fundamentally different class of spacecraft. Engineered to survive the harshest radiation environments and to fully capitalize on today's and tomorrow's massive rockets, K2 satellites deliver unmatched capability at constellation scale and across multiple orbits. With multiple launches planned through 2026 and 2027, we're Building Bigger to develop the solar system and become a Kardashev Type II (K2) civilization. If you are a motivated individual who thrives in a fast-paced environment and you're excited about contributing to the success of a groundbreaking Series C space startup, we'd love for you to apply. Stay Connected with K2 Space for Future Job Openings Across Engineering We're on a mission to push the boundaries of what's possible in space systems and large-scale satellite platforms. Even when we don't have a specific opening listed, we're always eager to connect with innovators, builders, and problem-solvers who share our passion for making space more accessible. This is not a job application—it's a way for you to raise your hand and say, "Keep me in the loop." By joining our talent community, you'll: * Receive occasional updates about K2 Space projects, milestones, and future opportunities. * Be among the first to know when a role opens that might align with your skills and interests. * Stay engaged with our growing network of space enthusiasts and professionals. Who Should Join We welcome anyone excited about space technology and exploration—engineers, operators, mission designers, business minds, creatives, and everyone in between—who want to be part of K2 Space's journey. How to Join * Fill out our brief interest form below. * Share a resume and a quick note about your skills, passions, or areas of interest. * We'll keep you on our radar for future opportunities and updates. If you don't meet 100% of the preferred skills and experience, we encourage you to still apply! Building a spacecraft unlike any other requires a team unlike any other and non-traditional career twists and turns are encouraged! If you need a reasonable accommodation as part of your application for employment or interviews with us, please let us know. Export Compliance As defined in the ITAR, "U.S. Persons" include U.S. citizens, lawful permanent residents (i.e., Green Card holders), and certain protected individuals (e.g., refugees/asylees, American Samoans). Please consult with a knowledgeable advisor if you are unsure whether you are a "U.S. Person." The person hired for this role will have access to information and items controlled by U.S. export control regulations, including the export control regulations outlined in the International Traffic in Arms Regulation (ITAR). The person hired for this role must therefore either be a "U.S. person" as defined by 22 C.F.R. § 120.15 or otherwise eligible for a federally issued export control license. Equal Opportunity K2 Space is an Equal Opportunity Employer; employment with K2 Space is governed on the basis of merit, competence and qualifications and will not be influenced in any manner by race, color, religion, gender, national origin/ethnicity, veteran status, disability status, age, sexual orientation, gender identity, marital status, mental or physical disability or any other legally protected status.

Job Description K2 is building the largest and highest-power satellites ever flown, unlocking performance levels previously out of reach across every orbit. Backed by $450M from leading investors including Altimeter Capital, Redpoint Ventures, T. Rowe Price, Lightspeed Venture Partners, Alpine Space Ventures, and others – with an additional $500M in signed contracts across commercial and US government customers – we're mass-producing the highest-power satellite platforms ever built for missions from LEO to deep space. The rise of heavy-lift launch vehicles is shifting the industry from an era of mass constraint to one of mass abundance, and we believe this new era demands a fundamentally different class of spacecraft. Engineered to survive the harshest radiation environments and to fully capitalize on today's and tomorrow's massive rockets, K2 satellites deliver unmatched capability at constellation scale and across multiple orbits. With multiple launches planned through 2026 and 2027, we're Building Bigger to develop the solar system and become a Kardashev Type II (K2) civilization. If you are a motivated individual who thrives in a fast-paced environment and you're excited about contributing to the success of a groundbreaking Series C space startup, we'd love for you to apply. The Role You will be responsible for designing some of the highest power systems ever flown in space. You will be able to develop a broad range of power electronics devices ranging from power switching to power conversion components capable of operating in the harshest space environments. In your first 6 months you will prototype your first high power devices and execute environmental and performance testing to refine your designs. In your first year you will qualify your hardware for flight and begin designing even more capable devices for future generations of spacecraft. In your first two years you will have flown your power devices in space and developed novel designs across all power domains. Responsibilities • Develop power electronics for large spacecraft with power systems ranging from 20kW to 100kW capability, • Serve as Responsible Engineer for flight hardware from conception through flight, • Qualify your designs through environmental testing including vibration, shock, thermal, and thermal vacuum testing, • Work with partners/customers to define interfaces between the power system and various spacecraft loads, • Bachelor's degree in electrical engineering, • Proficient with circuit simulation tools such as LTspice, • Experience with environmental testing for space electronics such as thermal testing, vibration testing, TVAC testing, shock testing, radiation testing, and EMI/EMC testing, • Experience with high performance kW scale isolated power converter design, • Experience with load switch design and power path protection schemes, • Experience with power stage component selection for use in radiation environments, • Knowledge of filter design for stability, noise rejection, and surviving threat signals, • Base salary range for this role is $160,000 - $210,000 + equity in the company, • Salary will be based on several factors including, but not limited to: knowledge and skills, education, and experience level If you need a reasonable accommodation as part of your application for employment or interviews with us, please let us know. Export Compliance As defined in the ITAR, "U.S. Persons" include U.S. citizens, lawful permanent residents (i.e., Green Card holders), and certain protected individuals (e.g., refugees/asylees, American Samoans). Please consult with a knowledgeable advisor if you are unsure whether you are a "U.S. Person." The person hired for this role will have access to information and items controlled by U.S. export control regulations, including the export control regulations outlined in the International Traffic in Arms Regulation (ITAR). The person hired for this role must therefore either be a "U.S. person" as defined by 22 C.F.R. § 120.15 or otherwise eligible for a federally issued export control license. Equal Opportunity K2 Space is an Equal Opportunity Employer; employment with K2 Space is governed on the basis of merit, competence and qualifications and will not be influenced in any manner by race, color, religion, gender, national origin/ethnicity, veteran status, disability status, age, sexual orientation, gender identity, marital status, mental or physical disability or any other legally protected status.

Job Description K2 is building the largest and highest-power satellites ever flown, unlocking performance levels previously out of reach across every orbit. Backed by $450M from leading investors including Altimeter Capital, Redpoint Ventures, T. Rowe Price, Lightspeed Venture Partners, Alpine Space Ventures, and others – with an additional $500M in signed contracts across commercial and US government customers – we're mass-producing the highest-power satellite platforms ever built for missions from LEO to deep space. The rise of heavy-lift launch vehicles is shifting the industry from an era of mass constraint to one of mass abundance, and we believe this new era demands a fundamentally different class of spacecraft. Engineered to survive the harshest radiation environments and to fully capitalize on today's and tomorrow's massive rockets, K2 satellites deliver unmatched capability at constellation scale and across multiple orbits. With multiple launches planned through 2026 and 2027, we're Building Bigger to develop the solar system and become a Kardashev Type II (K2) civilization. If you are a motivated individual who thrives in a fast-paced environment and you're excited about contributing to the success of a groundbreaking Series C space startup, we'd love for you to apply. The Role You will own the success of the mechanical structures and mechanisms that will be key to our satellite operation. In your first 6 months, you will define mechanical requirements, create initial concepts and trades, perform preliminary and detailed analysis, define development test campaigns, trade and select any purchased electromechanical subsystems, and produce development hardware. In your first year, you will validate your designs through prototype iterations and build and qualify flight hardware. In your first two years you will fly your hardware in space while directly supporting production and integration. Responsibilities • Take hardware and mechanisms from conceptual design through qualification to on-orbit operations in order to support internal and external customer needs, • Lead design reviews from kickoff through qualification and beyond, • Drive hardware development, including hands-on development testing, analysis correlation, and follow-on hardware iterations, • Perform hardware trades that steer both sub-system and top-level product direction, • Collaborate with a cross-functional team to establish product requirements, company processes, and best practices for hardware design and manufacturing, • Bachelor's degree in mechanical, aerospace, or other relevant engineering discipline, • 10+ years of experience with mechanical and/or electromechanical design and analysis, • Experience with CAD or FEA software packages, • Experience with the practical application of GD&T, • Demonstrated proficiency in the principles of mechanical design, materials, thermodynamics, and fluids, • Experience designing, building, and testing moving mechanical assemblies for aerospace applications (satellite mechanical systems, payloads, launch vehicles, propulsion systems, and/or aircraft structures and mechanisms), • Experience with NASA-STD-5017, SMC-S-016, and GSFC-STD-7000 for the design and qualification of in-space Moving Mechanism Assemblies, • Demonstrated ability to own mechanical hardware or systems within an integrated engineering team outside a classroom setting, • Demonstrated understanding of structural analysis and failure modes of complex mechanical systems in space environments and operations, • Base salary range for this role is $185,000 – $200,000 + equity in the company, • Salary and level will be based on several factors including, but not limited to: knowledge and skills, education, and experience level If you need a reasonable accommodation as part of your application for employment or interviews with us, please let us know. Export Compliance As defined in the ITAR, "U.S. Persons" include U.S. citizens, lawful permanent residents (i.e., Green Card holders), and certain protected individuals (e.g., refugees/asylees, American Samoans). Please consult with a knowledgeable advisor if you are unsure whether you are a "U.S. Person." The person hired for this role will have access to information and items controlled by U.S. export control regulations, including the export control regulations outlined in the International Traffic in Arms Regulation (ITAR). The person hired for this role must therefore either be a "U.S. person" as defined by 22 C.F.R. § 120.15 or otherwise eligible for a federally issued export control license. Equal Opportunity K2 Space is an Equal Opportunity Employer; employment with K2 Space is governed on the basis of merit, competence and qualifications and will not be influenced in any manner by race, color, religion, gender, national origin/ethnicity, veteran status, disability status, age, sexual orientation, gender identity, marital status, mental or physical disability or any other legally protected status.

Job Description Mastech Digital provides digital and mainstream technology staff as well as Digital Transformation Services for all American Corporations. We are currently seeking a Mechanical Engineer for our client in the IT-Services domain. We value our professionals, providing comprehensive benefits and the opportunity for growth. This is a Contract position, and the client is looking for someone to start immediately. Duration: 12+ Months Contract Location: Northridge, CA Salary: $60.00-$65.00/Hourly Role: Mechanical Engineer Primary Skills: Mechanical Engineering Role Description: The Mechanical Engineer must have 5+ years of experience. Key Job Responsibilities: • Generate detailed designs via CAD systems and engineering drawings with appropriate geometric dimensioning and tolerancing (GD&T), • Support space hardware qualification/acceptance campaigns including:, • Deliver well-written test plans, procedures, and reports, • Design of test fixtures, • Assembly and build of test/flight hardware, • Develop space hardware assembly build procedures, • Perform mechanical builds of prototype or space hardware Basic Qualifications: • Experience working with cross-functional teams and a strong ability to collaborate., • Bachelor’s Degree in Mechanical, Structural, and Aeronautical Engineering or related discipline, or equivalent experience, • 3+ years of experience with Siemens NX CAD package (Siemens NX, NX Teamcenter, GD&T per ASME y14.5), • 3+ years of experience in space hardware assembly, integration and test, • Familiar with mechanical test instrumentation such as thermocouples, RTDs, accelerometers, etc., • Familiar with mechanical assembly, typical assembly tools, and space hardware build best practices. Education: Bachelor’s Degree in Mechanical, Structural, and Aeronautical Engineering or related discipline, or equivalent experience Experience: Minimum 5+ years of experience Relocation: This position will not cover relocation expenses Travel: No Local Preferred: Yes Note: Must be able to work on a W2 basis (No C2C) Recruiter Name: Veena Grover Recruiter Phone: 412-525-7995 Benefits: We have various coverages and additional benefits to choose from: • Medical, Dental (Including Ortho) & Vision Insurance (Option to Enroll)., • Paid Leaves (Wherever applicable)., • Life & Disability Coverage (Upon eligibility)., • 401K Option, Education Assistance Program and more. Mastech Digital is an Equal Opportunity Employer - All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability, or protected veteran status.

Job Description Overview Ansible Government Solutions, LLC (Ansible) is currently recruiting for General DRT / Radiologic Technologists / Radiographers to support the VA Greater Los Angeles Healthcare System located at 11301 Wilshire Boulevard, Los Angeles, CA 90073, and potentially at any of its surrounding clinics. General Diagnostic Technologists perform radiography of the entire body. Procedures performed include Cholangiography, Lumbar and Thoracic Myelography, Gastrointestinal Studies, Intravenous Pyelograms, Arteriography, Operative Cholangiography, and Arthrography. Available shift schedules include days, evenings, and nights. Exceptional compensation and benefits packages are available to qualified candidates. Ansible Government Solutions, LLC (Ansible) is a Service-Disabled Veteran-Owned Small Business (SDVOSB) providing Federal customers with solutions in many arenas. Our customers face wide-ranging challenges in the fields of national security, health care, and information technology. To address these challenges, we employ intelligent and committed staff who take care of our customers’ success as if it is their own. Responsibilities • Performs radiography of the entire body, • Procedures performed include, Cholangiography, Lumbar and Thoracic Myelography, Gastrointestinal Studies, Intravenous Pyelograms, Arteriography, Operative Cholangiography and Arthrography, • Sets up radiographic suites and ensures that sterile supplies, contrast materials, catheters, and other required equipment/supplies are present and available, • Prepares and administers contrast material orally, by enema, or under close supervision of radiologists, intravenously but not independently; as required by procedure or patient’s condition, monitors vital signs (blood pressure and heart rate) and reports any significant changes to a radiologist, • Lifts, positions, pushes and transfers patients, supplies, and/or equipment as needed, • Performs related clerical duties such as sending images to PACS, archiving images, and case editing of computer requests and reports, • English language proficiency, • ARRT(R) certified (required), • Graduate of an accredited Joint Review Committee on Education of Radiologic Technologists (JRCERT) program, and have a minimum of two (2) years of work experience, • Note - Student internship and training time spent in a radiology setting does not count toward the two (2) years of experience, • Experience with Picture Archiving Communication System (PACS), experience with Agfa PACS is preferred but not required, • American Heart Association (AHA) Basic Life Support (BLS) certification is required All candidates must be able to: • Sit, stand, walk, lift, squat, bend, twist, and reach above shoulders during the work shift, • Lift up to 50 lbs from floor to waist, • Lift up to 20 lbs, • Carry up to 40 lbs a reasonable distance Powered by JazzHR DmE0fzOYf2

Job Description K2 is building the largest and highest-power satellites ever flown, unlocking performance levels previously out of reach across every orbit. Backed by $450M from leading investors including Altimeter Capital, Redpoint Ventures, T. Rowe Price, Lightspeed Venture Partners, Alpine Space Ventures, and others – with an additional $500M in signed contracts across commercial and US government customers – we're mass-producing the highest-power satellite platforms ever built for missions from LEO to deep space. The rise of heavy-lift launch vehicles is shifting the industry from an era of mass constraint to one of mass abundance, and we believe this new era demands a fundamentally different class of spacecraft. Engineered to survive the harshest radiation environments and to fully capitalize on today's and tomorrow's massive rockets, K2 satellites deliver unmatched capability at constellation scale and across multiple orbits. With multiple launches planned through 2026 and 2027, we're Building Bigger to develop the solar system and become a Kardashev Type II (K2) civilization. If you are a motivated individual who thrives in a fast-paced environment and you're excited about contributing to the success of a groundbreaking Series C space startup, we'd love for you to apply. The RoleAs a Principal GNC engineer, you will be a core driver of the overall spacecraft GNC architecture. You will execute detailed trade studies to find new and novel ways to implement the spacecraft's guidance, attitude control, and attitude and orbit estimation systems. You will anticipate company needs and stand-up infrastructure to support the core and future business.In the first 3 months, you will own and execute the Verification and Validation plan for the GNC stack, driving the system to flight readiness via a robust and thorough analysis of vehicle performance in both nominal and off nominal environments. This push for flight readiness will motivate thorough analysis, leading to updates to both the GNC stack and the K2 6-DOF simulation. The expectation is that all GNC team members commit code to the 6-DOF sim as well as owning a portion of the GNC flight software.In the first 6 months, you will support launch and on orbit operations of the first full demonstration of the K2 spacecraft bus – the Mega. In parallel, you will scope and support the block 2 upgrades of the GNC stack and 6-DOF sim, taking lessons learned from on orbit operations to increase the fidelity of the simulation and the vehicle performance of the GNC stack.In the first year, you will own the planning and development of future tooling to support GNC in defining vehicle level capabilities, especially for future missions. This includes mission design, precision pointing and controls analysis, constellation development, and 6-DOF simulation development.Responsibilities • Work with other engineering leads to set the direction and develop novel vehicle architecture, • Develop novel algorithms for precise pointing of very large, flexible structures in earth orbit and beyond, • Develop novel slewing algorithms of very large, flexible structures in earth orbit and beyond, • Develop simulation and modeling tools to support vehicle and GNC trade studies. This includes mission design, controls analysis, and 6-DOF simulation development., • Integral to building the GNC organization by recruiting, hiring, and mentoring other engineers Qualifications, • Experience with GNC actuator or sensor sizing, selection, and system design, • Experience with implementing attitude control and/or estimation algorithms on spacecraft, • Experience with verification and validation of GNC flight software in an integrated environment, leveraging 6-DOF simulation and HITL testing., • Experience with early-stage spacecraft conceptual design, i.e. "clean sheet" design work, • Experience with Python, Julia, C/C++, or Matlab for algorithm development, implementation, and simulationNice to Have, • Experience with control algorithm development, • Experience with reaction wheel, control moment gyroscope, or thruster sizing and algorithm implementation, • Experience with navigation, specifically Extended Kalman Filters, • Experience with trajectory analysis, modeling, and mission designCompensation and Benefits:, • Base salary range for this role is $190,000 - $260,000 + equity in the company, • Salary will be based on several factors including, but not limited to: knowledge and skills, education, and experience level If you need a reasonable accommodation as part of your application for employment or interviews with us, please let us know. Export Compliance As defined in the ITAR, "U.S. Persons" include U.S. citizens, lawful permanent residents (i.e., Green Card holders), and certain protected individuals (e.g., refugees/asylees, American Samoans). Please consult with a knowledgeable advisor if you are unsure whether you are a "U.S. Person." The person hired for this role will have access to information and items controlled by U.S. export control regulations, including the export control regulations outlined in the International Traffic in Arms Regulation (ITAR). The person hired for this role must therefore either be a "U.S. person" as defined by 22 C.F.R. § 120.15 or otherwise eligible for a federally issued export control license. Equal Opportunity K2 Space is an Equal Opportunity Employer; employment with K2 Space is governed on the basis of merit, competence and qualifications and will not be influenced in any manner by race, color, religion, gender, national origin/ethnicity, veteran status, disability status, age, sexual orientation, gender identity, marital status, mental or physical disability or any other legally protected status.

Job Description Overview Ansible Government Solutions, LLC (Ansible) is currently recruiting for Magnetic Resonance Imaging (MRI) Technologists to support the VA Greater Los Angeles Healthcare System located at 11301 Wilshire Boulevard, Los Angeles, CA 90073, and potentially at any of its surrounding clinics. MRI Technologists shall operate a super conductive MRI machine, which is a highly complex computerized imaging device that employs the use of strong magnetic fields and radio waves to acquire images of the entire body, including the brain, neck, spine, chest, body, and extremities. Available shift schedules include days, evenings, and nights. Exceptional compensation and benefits packages are available to qualified candidates. Ansible Government Solutions, LLC (Ansible) is a Service-Disabled Veteran-Owned Small Business (SDVOSB) providing Federal customers with solutions in many arenas. Our customers face wide-ranging challenges in the fields of national security, health care, and information technology. To address these challenges, we employ intelligent and committed staff who take care of our customers’ success as if it is their own. Responsibilities • Operates a super conductive MRI machine, which is a highly complex computerized imaging device that employs the use of strong magnetic fields and radio waves to acquire images of the entire body, including the brain, neck, spine, chest, body and extremities, • Sets up radiographic suites and ensures that sterile supplies, contrast materials, catheters, and other required equipment/supplies are present and available, • Prepares and administers contrast material orally, by enema, or under close supervision of radiologists, intravenously but not independently; as required by procedure or patient’s condition, monitors vital signs (blood pressure and heart rate), and reports any significant changes to a radiologist, • Lifts, positions, pushes, and transfers patients, supplies, and/or equipment as needed, • Performs related clerical duties such as sending images to PACS, archiving images, and case editing of computer requests and reports, • English language proficiency, • ARRT(MR) certification, • Graduate of an accredited Joint Review Committee on Education of Radiologic Technologists (JRCERT) program, and have a minimum of two (2) years of work experience, • Note - Student internship and training time spent in a radiology setting does not count toward the two (2) years of experience, • Experience with Picture Archiving Communication System (PACS), experience with Agfa PACS is preferred but not required, • American Heart Association (AHA) Basic Life Support (BLS) certification is required All candidates must be able to: • Sit, stand, walk, lift, squat, bend, twist, and reach above shoulders during the work shift, • Lift up to 50 lbs from floor to waist, • Lift up to 20 lbs, • Carry up to 40 lbs a reasonable distance Powered by JazzHR 12CCUG5Med

Job Description K2 is building the largest and highest-power satellites ever flown, unlocking performance levels previously out of reach across every orbit. Backed by $450M from leading investors including Altimeter Capital, Redpoint Ventures, T. Rowe Price, Lightspeed Venture Partners, Alpine Space Ventures, and others – with an additional $500M in signed contracts across commercial and US government customers – we're mass-producing the highest-power satellite platforms ever built for missions from LEO to deep space. The rise of heavy-lift launch vehicles is shifting the industry from an era of mass constraint to one of mass abundance, and we believe this new era demands a fundamentally different class of spacecraft. Engineered to survive the harshest radiation environments and to fully capitalize on today's and tomorrow's massive rockets, K2 satellites deliver unmatched capability at constellation scale and across multiple orbits. With multiple launches planned through 2026 and 2027, we're Building Bigger to develop the solar system and become a Kardashev Type II (K2) civilization. If you are a motivated individual who thrives in a fast-paced environment and you're excited about contributing to the success of a groundbreaking Series C space startup, we'd love for you to apply. The Role You will own the success of mechanisms that will be key to our satellite operation and performance. In your first 6 months, you will define mechanism requirements, trade architectures and build initial prototypes, perform preliminary and detailed analysis, define development test campaigns, trade and select any purchased components, and produce development hardware. In your first year you will validate your designs through prototype iterations in rigorous test campaigns, build, and qualify flight hardware. In your first two years you will fly your hardware in space while supporting operations, production, and integration teams as we scale. Responsibilities • Take hardware and mechanisms from conceptual design through qualification to on-orbit operations in order to support internal and external customer needs, • Lead design reviews from kickoff through qualification and beyond, • Drive hardware development, including hands-on development testing, analysis correlation, and follow-on hardware iterations, • Perform hardware trades that steer both sub-system and top-level product direction, • Collaborate with a cross-functional team to establish product requirements, company processes, and best practices for hardware design and manufacturing, • Bachelor's degree in mechanical, aerospace, or other relevant engineering discipline, • Minimum 5+ years of experience with mechanical and/or electromechanical design and analysis, • Experience designing, building, and testing moving mechanical assemblies for aerospace applications (satellite mechanical systems, payloads, launch vehicles, propulsion systems, and/or aircraft structures and mechanisms), • Experience with NASA-STD-5017, SMC-S-016, and GSFC-STD-7000 for the design and qualification of in-space Moving Mechanism Assemblies, • Experience with kinematic synthesis, electromechanical actuation, mechatronics and instrumentation, • Experience with bearing analysis, preload techniques, and preload measurement, • Experience with the practical application of GD&T, • Demonstrated ability to own moving mechanism assemblies across the full product lifecycle in a high velocity environment, • Demonstrated understanding of structural analysis and failure modes of complex mechanical systems in space environments and operations, • Base salary range for this role is $140,000 - $175,000 + equity in the company, • Salary and level will be based on several factors including, but not limited to: knowledge and skills, education, and experience level If you need a reasonable accommodation as part of your application for employment or interviews with us, please let us know. Export Compliance As defined in the ITAR, "U.S. Persons" include U.S. citizens, lawful permanent residents (i.e., Green Card holders), and certain protected individuals (e.g., refugees/asylees, American Samoans). Please consult with a knowledgeable advisor if you are unsure whether you are a "U.S. Person." The person hired for this role will have access to information and items controlled by U.S. export control regulations, including the export control regulations outlined in the International Traffic in Arms Regulation (ITAR). The person hired for this role must therefore either be a "U.S. person" as defined by 22 C.F.R. § 120.15 or otherwise eligible for a federally issued export control license. Equal Opportunity K2 Space is an Equal Opportunity Employer; employment with K2 Space is governed on the basis of merit, competence and qualifications and will not be influenced in any manner by race, color, religion, gender, national origin/ethnicity, veteran status, disability status, age, sexual orientation, gender identity, marital status, mental or physical disability or any other legally protected status.

Job Description K2 is building the largest and highest-power satellites ever flown, unlocking performance levels previously out of reach across every orbit. Backed by $450M from leading investors including Altimeter Capital, Redpoint Ventures, T. Rowe Price, Lightspeed Venture Partners, Alpine Space Ventures, and others – with an additional $500M in signed contracts across commercial and US government customers – we're mass-producing the highest-power satellite platforms ever built for missions from LEO to deep space. The rise of heavy-lift launch vehicles is shifting the industry from an era of mass constraint to one of mass abundance, and we believe this new era demands a fundamentally different class of spacecraft. Engineered to survive the harshest radiation environments and to fully capitalize on today's and tomorrow's massive rockets, K2 satellites deliver unmatched capability at constellation scale and across multiple orbits. With multiple launches planned through 2026 and 2027, we're Building Bigger to develop the solar system and become a Kardashev Type II (K2) civilization. If you are a motivated individual who thrives in a fast-paced environment and you're excited about contributing to the success of a groundbreaking Series C space startup, we'd love for you to apply. Stay Connected with K2 Space for Future Job Openings Across Engineering We're on a mission to push the boundaries of what's possible in space systems and large-scale satellite platforms. Even when we don't have a specific opening listed, we're always eager to connect with innovators, builders, and problem-solvers who share our passion for making space more accessible. This is not a job application—it's a way for you to raise your hand and say, "Keep me in the loop." By joining our talent community, you'll: * Receive occasional updates about K2 Space projects, milestones, and future opportunities. * Be among the first to know when a role opens that might align with your skills and interests. * Stay engaged with our growing network of space enthusiasts and professionals. Who Should Join We welcome anyone excited about space technology and exploration—engineers, operators, mission designers, business minds, creatives, and everyone in between—who want to be part of K2 Space's journey. How to Join * Fill out our brief interest form below. * Share a resume and a quick note about your skills, passions, or areas of interest. * We'll keep you on our radar for future opportunities and updates. If you don't meet 100% of the preferred skills and experience, we encourage you to still apply! Building a spacecraft unlike any other requires a team unlike any other and non-traditional career twists and turns are encouraged! If you need a reasonable accommodation as part of your application for employment or interviews with us, please let us know. Export Compliance As defined in the ITAR, "U.S. Persons" include U.S. citizens, lawful permanent residents (i.e., Green Card holders), and certain protected individuals (e.g., refugees/asylees, American Samoans). Please consult with a knowledgeable advisor if you are unsure whether you are a "U.S. Person." The person hired for this role will have access to information and items controlled by U.S. export control regulations, including the export control regulations outlined in the International Traffic in Arms Regulation (ITAR). The person hired for this role must therefore either be a "U.S. person" as defined by 22 C.F.R. § 120.15 or otherwise eligible for a federally issued export control license. Equal Opportunity K2 Space is an Equal Opportunity Employer; employment with K2 Space is governed on the basis of merit, competence and qualifications and will not be influenced in any manner by race, color, religion, gender, national origin/ethnicity, veteran status, disability status, age, sexual orientation, gender identity, marital status, mental or physical disability or any other legally protected status.

Job Description K2 is building the largest and highest-power satellites ever flown, unlocking performance levels previously out of reach across every orbit. Backed by $450M from leading investors including Altimeter Capital, Redpoint Ventures, T. Rowe Price, Lightspeed Venture Partners, Alpine Space Ventures, and others – with an additional $500M in signed contracts across commercial and US government customers – we're mass-producing the highest-power satellite platforms ever built for missions from LEO to deep space. The rise of heavy-lift launch vehicles is shifting the industry from an era of mass constraint to one of mass abundance, and we believe this new era demands a fundamentally different class of spacecraft. Engineered to survive the harshest radiation environments and to fully capitalize on today's and tomorrow's massive rockets, K2 satellites deliver unmatched capability at constellation scale and across multiple orbits. With multiple launches planned through 2026 and 2027, we're Building Bigger to develop the solar system and become a Kardashev Type II (K2) civilization. If you are a motivated individual who thrives in a fast-paced environment and you're excited about contributing to the success of a groundbreaking Series C space startup, we'd love for you to apply. The Role You will contribute to the design, development, and testing of avionics components of major satellite subsystems. This role will support production and development of the K2 Mega-class satellite. You will assemble, test, rework, and integrate harnesses and electromechanical assemblies. Our ideal candidate will be a self-starter and have a high level of attention to detail to ensure quality and reliability of electrical components and systems. Responsibilities • Fabricate wire harnesses from assembly drawings and electrical schematics, • Assemble electromechanical assemblies and assist engineering with the development of production processes for first time builds, • Follow work instructions / assembly procedures and document work performed through MES system and other tools, • Work side-by-side with design and manufacturing engineering in a fast-paced environment, • Route harnesses and support integration of electromechanical assemblies on the Mega-class satellite, • Support production transition from engineering development and initial production to full rate production, • 2+ years of experience in cable harness fabrication, assembly, or integration, • Experience in a manufacturing setting, preferably in aerospace or electronics, • Proficiency in MS Office suite, and shop floor management software, • Demonstrate high level of ownership and problem-solving abilities, • Able to set up and use a torque wrench and other hand tools such as: wrenches and safety wire pliers, • Experience performing crimping, wire stripping, continuity testing, connector pin outs, routing, and tie wrapping, • Experience using test and measuring tools (digital multimeter, caliper, micrometer), • Familiar with ERP and part traceability, • IPC Certified for PCB and cable harness rework (IPC-A-610, IPC-A-620), • Hand soldering ability and PCB rework experience, • Ability to read, review, and redline electrical schematics and mechanical drawings, • Experience with various potting and encapsulation techniques for cables and enclosures, • Must be able to perform repetitive tasks such as bending or twisting, grasping, standing, lifting, pulling, pushing, stooping, stretching, carrying, and use hands to operate tools or machine controls, • Must be able to lift and carry parts or equipment up to 50 lbs. unassisted, • Must be able to stand for extended periods of time, • Hourly pay range for this non-exempt role is $24– $35 + equity in the company, • Compensation will be based on several factors including, but not limited to: knowledge and skills, education, and experience level If you need a reasonable accommodation as part of your application for employment or interviews with us, please let us know. Export Compliance As defined in the ITAR, "U.S. Persons" include U.S. citizens, lawful permanent residents (i.e., Green Card holders), and certain protected individuals (e.g., refugees/asylees, American Samoans). Please consult with a knowledgeable advisor if you are unsure whether you are a "U.S. Person." The person hired for this role will have access to information and items controlled by U.S. export control regulations, including the export control regulations outlined in the International Traffic in Arms Regulation (ITAR). The person hired for this role must therefore either be a "U.S. person" as defined by 22 C.F.R. § 120.15 or otherwise eligible for a federally issued export control license. Equal Opportunity K2 Space is an Equal Opportunity Employer; employment with K2 Space is governed on the basis of merit, competence and qualifications and will not be influenced in any manner by race, color, religion, gender, national origin/ethnicity, veteran status, disability status, age, sexual orientation, gender identity, marital status, mental or physical disability or any other legally protected status.

Job Description Hadrian - Manufacturing the Future Hadrian is building autonomous factories that help aerospace and defense companies manufacture rockets, satellites, jets, and ships up to 10x faster and up to 2x cheaper. By combining advanced software, robotics, and full-stack manufacturing, we are reinventing how America produces its most critical parts. We’re accelerating our mission with the launch of Factory 3 in Mesa, Arizona, a 290,000-square-foot facility creating 350 new jobs. We are expanding rapidly to support thousands of future hires, launching Hadrian Maritime to expand into naval production, and introducing a Factory-as-a-Service model that delivers complete systems instead of individual parts. Hadrian is backed by leading investors including T. Rowe Price, Lux Capital, Founders Fund, and Andreessen Horowitz, our fast-growing team is united around reindustrializing American manufacturing for the 21st century and beyond. The Role: As a Supplier Manufacturing Readiness Engineer, you will own our Manufacturing Readiness Review (MRR) and Design for Manufacturability (DFM) processes for all Atlas-platform jobs. You will act as the primary technical liaison between Hadrian and a network of CNC machining and related commodity suppliers, ensuring parts launch on time and at cost. Your work directly reduces quality and delivery risk for mission-critical aerospace and defense programs. What You’ll Do: * Serve as the technical interface between Hadrian and external suppliers; provide real-time support on machining, sheet-metal, and similar processes. * Own and continuously improve the MRR workflow, scaling it from critical orders to 100 % of Atlas orders. * Lead supplier-side DFM reviews and offer actionable feedback to Engineering and customers during sales calls. * Conduct structured root-cause analysis and corrective-action planning to resolve quality or delivery issues. * Analyze supplier manufacturing methods, tooling, fixtures, and in-process inspection; recommend and track improvements. * Identify, evaluate, and onboard high-performing suppliers in partnership with Sourcing and Supplier Quality Engineering (SQE). * Use Six Sigma and other data-driven tools to monitor trends and drive part-performance improvements. * Travel to supplier sites for hands-on issue resolution and process validation (up to 40 %). * Maintain compliance with AS9100 and other aerospace quality-system requirements; support audits and recovery plans. * Document all activities in Hadrian DFM, Atlas, Airtable, and related systems in a timely manner. Required Qualifications: * Bachelor’s degree in Mechanical, Manufacturing, Industrial Engineering or a related discipline or equivalent practical experience. * 3+ years of experience in supplier quality, manufacturing engineering, or industrialization for complex machined and/or sheet-metal parts. * Proven ownership of MRR, PPAP, FAI, or comparable production-readiness processes. * Demonstrated expertise in root-cause analysis, corrective-action planning, and hands-on supplier support. * Working knowledge of AS9100 or ISO 9001 quality-management systems. * Proficiency with DFM tools, manufacturing data analysis, and collaboration software (e.g., Hadrian DFM, Atlas, Airtable, spreadsheets). * Ability to travel domestically up to 40 % of the time and to perform shop-floor activities while wearing required PPE. * Excellent written and verbal communication skills; able to explain technical concepts to non-technical stakeholders and customers. What will set you apart: * Experience supporting aerospace or defense production programs. * Six Sigma Green- or Black-Belt certification. * Familiarity with Geometric Dimensioning & Tolerancing (GD&T) and advanced metrology. * Prior involvement in supplier onboarding and capability assessments. * Experience deploying manufacturing-readiness or DFM processes in a SaaS or cloud-based environment. Benefits * Medical, dental, vision, and life insurance plans for employees * 401k * Relocation support may be provided for certain situations, based on business need. * Flexible vacation policy ITAR Requirements To conform to U.S. Government space technology export regulations, including the International Traffic in Arms Regulations (ITAR) you must be a U.S. citizen, lawful permanent resident of the U.S., protected individual as defined by 8 U.S.C. 1324b(a)(3), or eligible to obtain the required authorizations from the U.S. Department of State. Learn more about the ITAR here. Hadrian Is An Equal Opportunity Employer It is the Company’s policy to provide equal employment opportunity for all applicants and employees. The Company does not unlawfully discriminate on the basis of race inclusive of traits historically associated with race (including, but not limited to, hair texture and protective hairstyles, such as braids, locks and twists), color, religion, sex (including pregnancy, childbirth, or related medical conditions), gender identity, gender expression, transgender status, national origin (including, in California, possession of a drivers license), ancestry, citizenship, age, physical or mental disability, height or weight, medical condition, family care status, military or veteran status, marital status, domestic partner status, sexual orientation, genetic information, exercise of reproductive rights, any other basis protected by local, state, or federal laws, or any combination of the above characteristics. When necessary, the Company also makes reasonable accommodations for disabled candidates and employees, including for candidates or employees who are disabled by pregnancy, childbirth, or related medical conditions.

Job Description K2 is building the largest and highest-power satellites ever flown, unlocking performance levels previously out of reach across every orbit. Backed by $450M from leading investors including Altimeter Capital, Redpoint Ventures, T. Rowe Price, Lightspeed Venture Partners, Alpine Space Ventures, and others – with an additional $500M in signed contracts across commercial and US government customers – we're mass-producing the highest-power satellite platforms ever built for missions from LEO to deep space. The rise of heavy-lift launch vehicles is shifting the industry from an era of mass constraint to one of mass abundance, and we believe this new era demands a fundamentally different class of spacecraft. Engineered to survive the harshest radiation environments and to fully capitalize on today's and tomorrow's massive rockets, K2 satellites deliver unmatched capability at constellation scale and across multiple orbits. With multiple launches planned through 2026 and 2027, we're Building Bigger to develop the solar system and become a Kardashev Type II (K2) civilization. If you are a motivated individual who thrives in a fast-paced environment and you're excited about contributing to the success of a groundbreaking Series C space startup, we'd love for you to apply. Stay Connected with K2 Space for Future Job Openings Across Engineering We're on a mission to push the boundaries of what's possible in space systems and large-scale satellite platforms. Even when we don't have a specific opening listed, we're always eager to connect with innovators, builders, and problem-solvers who share our passion for making space more accessible. This is not a job application—it's a way for you to raise your hand and say, "Keep me in the loop." By joining our talent community, you'll: * Receive occasional updates about K2 Space projects, milestones, and future opportunities. * Be among the first to know when a role opens that might align with your skills and interests. * Stay engaged with our growing network of space enthusiasts and professionals. Who Should Join We welcome anyone excited about space technology and exploration—engineers, operators, mission designers, business minds, creatives, and everyone in between—who want to be part of K2 Space's journey. How to Join * Fill out our brief interest form below. * Share a resume and a quick note about your skills, passions, or areas of interest. * We'll keep you on our radar for future opportunities and updates. If you don't meet 100% of the preferred skills and experience, we encourage you to still apply! Building a spacecraft unlike any other requires a team unlike any other and non-traditional career twists and turns are encouraged! If you need a reasonable accommodation as part of your application for employment or interviews with us, please let us know. Export Compliance As defined in the ITAR, "U.S. Persons" include U.S. citizens, lawful permanent residents (i.e., Green Card holders), and certain protected individuals (e.g., refugees/asylees, American Samoans). Please consult with a knowledgeable advisor if you are unsure whether you are a "U.S. Person." The person hired for this role will have access to information and items controlled by U.S. export control regulations, including the export control regulations outlined in the International Traffic in Arms Regulation (ITAR). The person hired for this role must therefore either be a "U.S. person" as defined by 22 C.F.R. § 120.15 or otherwise eligible for a federally issued export control license. Equal Opportunity K2 Space is an Equal Opportunity Employer; employment with K2 Space is governed on the basis of merit, competence and qualifications and will not be influenced in any manner by race, color, religion, gender, national origin/ethnicity, veteran status, disability status, age, sexual orientation, gender identity, marital status, mental or physical disability or any other legally protected status.

Job Description Hadrian - Manufacturing the Future Hadrian is building autonomous factories that help aerospace and defense companies manufacture rockets, satellites, jets, and ships up to 10x faster and up to 2x cheaper. By combining advanced software, robotics, and full-stack manufacturing, we are reinventing how America produces its most critical parts. We’re accelerating our mission with the launch of Factory 3 in Mesa, Arizona, a 290,000-square-foot facility creating 350 new jobs. We are expanding rapidly to support thousands of future hires, launching Hadrian Maritime to expand into naval production, and introducing a Factory-as-a-Service model that delivers complete systems instead of individual parts. Hadrian is backed by leading investors including T. Rowe Price, Lux Capital, Founders Fund, and Andreessen Horowitz, our fast-growing team is united around reindustrializing American manufacturing for the 21st century and beyond. The Role The Senior Counsel, Export Controls & Cybersecurity will serve as Hadrian’s subject-matter expert on ITAR, export controls, sanctions, and cybersecurity compliance, responsible for designing, implementing, and enforcing a scalable compliance framework across the company. This is a high-impact role for an experienced in-house attorney or specialist law firm practitioner who has operated as the primary export compliance owner for a regulated business. You will partner closely with executive leadership, engineering, IT, security, HR, and operations to enable growth while ensuring compliance across hiring, travel, data access, technology controls, and cybersecurity obligations in a highly regulated advanced manufacturing environment. What You’ll Do * Serve as Hadrian’s primary legal owner for ITAR, EAR, sanctions, and export-related compliance * Design, implement, and continuously improve Hadrian’s export compliance program, policies, and internal controls * Draft, enforce, and maintain policies related to: * ITAR / EAR compliance * Technology Control Plans (TCPs) * Foreign national access * Data access and system permissions * International travel and visitors * Advise on export classification, jurisdiction, licensing strategies, exemptions, and disclosures * Oversee compliance related to: * Hiring and onboarding * Sanctions and trade restrictions * International travel and assignments * Cloud systems and databases containing controlled technical data * Data security and transfers * Partner with Security, IT, and Engineering on cybersecurity, system access controls, and segregation of export-controlled data * Support cybersecurity and data protection obligations tied to government, defense, or regulated programs * Develop and deliver training for employees, managers, and leadership on export and cybersecurity compliance * Support audits, investigations, and regulatory inquiries as needed * Monitor regulatory changes and proactively assess impact on business operations * Manage outside counsel and consultants for specialized export, sanctions, or cybersecurity matters What We’re Looking For: * JD from an accredited law school and active bar membership in at least one U.S. jurisdiction * 7–10+ years of experience specializing in export controls, ITAR, sanctions, and related compliance matters * Experience functioning as an in-house export compliance attorney or a law firm attorney specializing deeply in export controls and regulatory compliance * Deep working knowledge of, ITAR and EAR, sanctions regimes, export licensing and compliance frameworks * Proven experience building, implementing, and owning an export compliance program * Experience advising on cybersecurity, data access, and technology controls in regulated environments * Strong business judgment and ability to translate regulatory requirements into practical, scalable solutions * Excellent communication skills and comfort advising senior leaders * Ability to operate autonomously in fast-paced, high-growth environments What Sets You Apart: * Prior in-house experience as the primary export compliance owner at a manufacturing, aerospace, defense, or hardware company * Experience supporting engineering-heavy or data-intensive organizations * Familiarity with government, defense, or national security-adjacent programs * Experience designing and enforcing Technology Control Plans in practice * Experience partnering deeply with IT, Security, and HR on access control and foreign national issues * Builder mindset with a track record of creating durable compliance systems, not just advisory memos * Ability to balance regulatory rigor with execution speed in a scaling company Compensation For this role, the target salary range is $185,000 - $250,000 (actual range may vary based on experience). This is the lowest to highest salary we reasonably and in good faith believe we would pay for this role at the time of this posting. We may ultimately pay more or less than the posted range, and the range may be modified in the future. An employee's pay position within the salary range will be based on several factors, including, but not limited to, relevant education, qualifications, certifications, experience, skills, geographic location, performance, and business or organizational needs. Benefits * Medical, dental, vision, and life insurance plans for employees * 401k * Relocation support may be provided for certain situations, based on business need. * Flexible vacation policy ITAR Requirements To conform to U.S. Government space technology export regulations, including the International Traffic in Arms Regulations (ITAR) you must be a U.S. citizen, lawful permanent resident of the U.S., protected individual as defined by 8 U.S.C. 1324b(a)(3), or eligible to obtain the required authorizations from the U.S. Department of State. Learn more about the ITAR here. Hadrian Is An Equal Opportunity Employer It is the Company’s policy to provide equal employment opportunity for all applicants and employees. The Company does not unlawfully discriminate on the basis of race inclusive of traits historically associated with race (including, but not limited to, hair texture and protective hairstyles, such as braids, locks and twists), color, religion, sex (including pregnancy, childbirth, or related medical conditions), gender identity, gender expression, transgender status, national origin (including, in California, possession of a drivers license), ancestry, citizenship, age, physical or mental disability, height or weight, medical condition, family care status, military or veteran status, marital status, domestic partner status, sexual orientation, genetic information, exercise of reproductive rights, any other basis protected by local, state, or federal laws, or any combination of the above characteristics. When necessary, the Company also makes reasonable accommodations for disabled candidates and employees, including for candidates or employees who are disabled by pregnancy, childbirth, or related medical conditions.

Job Description K2 is building the largest and highest-power satellites ever flown, unlocking performance levels previously out of reach across every orbit. Backed by $450M from leading investors including Altimeter Capital, Redpoint Ventures, T. Rowe Price, Lightspeed Venture Partners, Alpine Space Ventures, and others – with an additional $500M in signed contracts across commercial and US government customers – we're mass-producing the highest-power satellite platforms ever built for missions from LEO to deep space. The rise of heavy-lift launch vehicles is shifting the industry from an era of mass constraint to one of mass abundance, and we believe this new era demands a fundamentally different class of spacecraft. Engineered to survive the harshest radiation environments and to fully capitalize on today's and tomorrow's massive rockets, K2 satellites deliver unmatched capability at constellation scale and across multiple orbits. With multiple launches planned through 2026 and 2027, we're Building Bigger to develop the solar system and become a Kardashev Type II (K2) civilization. If you are a motivated individual who thrives in a fast-paced environment and you're excited about contributing to the success of a groundbreaking Series C space startup, we'd love for you to apply. The Role You will own the success of component, subsystem, and vehicle level testing across structural, thermal, fluid, dynamic, and electromechanical systems. You will lead projects and help stand-up infrastructure to support the core testing infrastructure. In your first 6 months, you will define development test campaigns, design and build test setups, and be hands-on with flight hardware. In your first year, you will validate designs through prototype testing and lead large multidisciplinary test campaigns. You will drive best practices by leading large test campaigns and mentoring the growing team. Responsibilities • Own kickoff, design, fabrication, build, operation, data collection, and conclusion/results for development tests through full vehicle qualification campaigns, • Design test hardware, fixturing, and tooling using CAD, FEA, and hand calculations, • Demonstrate best practices for activating test stands, operating test equipment, instrumentation, and executing tests in a safe and organized manner, • Troubleshoot performance issues and recommend solutions during test campaigns, • Clearly communicate technical data, findings, and recommendations to team members across all levels of the organization, • Anticipate future testing needs by collaborating with test suppliers and performing high impact infrastructure trade studies, • Lead improvements to testing standards with company-wide impact by creating tools, methods, and processes, • Bachelor's degree in mechanical, aerospace, or other relevant engineering discipline, • 5+ years of industry experience with mechanical, structural, and/or electromechanical test, design, and analysis, • Experience designing, building, and testing mechanical assemblies and test fixtures for aerospace or terrestrial applications (satellite mechanical systems, payloads, launch vehicles, propulsion systems, and/or aircraft structures and mechanisms), • Experience with CAD or FEA software packages, • Experience with data acquisition, controls, and dedicated test equipment (examples include motor dynos, material testers, vibration tables, environmental data loggers, motorsports DAQ), • Experience with the practical application of GD&T, • Experience with NX (Unigraphics) and Teamcenter PLM, • Experience with performing structural analysis (Simcenter 3D, Femap, or Hypermesh), • Basic practical programming abilities (Python, MATLAB, Simulink, C++, R, LabVIEW), • Demonstrated ability to own mechanical hardware or systems within an integrated engineering team, • Demonstrated understanding of structural analysis and failure modes of complex mechanical systems in space environments and operations, • Base salary range for this role is $140,000 - $175,000 + equity in the company, • Salary will be based on several factors including, but not limited to: knowledge and skills, education, and experience level If you need a reasonable accommodation as part of your application for employment or interviews with us, please let us know. Export Compliance As defined in the ITAR, "U.S. Persons" include U.S. citizens, lawful permanent residents (i.e., Green Card holders), and certain protected individuals (e.g., refugees/asylees, American Samoans). Please consult with a knowledgeable advisor if you are unsure whether you are a "U.S. Person." The person hired for this role will have access to information and items controlled by U.S. export control regulations, including the export control regulations outlined in the International Traffic in Arms Regulation (ITAR). The person hired for this role must therefore either be a "U.S. person" as defined by 22 C.F.R. § 120.15 or otherwise eligible for a federally issued export control license. Equal Opportunity K2 Space is an Equal Opportunity Employer; employment with K2 Space is governed on the basis of merit, competence and qualifications and will not be influenced in any manner by race, color, religion, gender, national origin/ethnicity, veteran status, disability status, age, sexual orientation, gender identity, marital status, mental or physical disability or any other legally protected status.

Job Description Hadrian - Manufacturing the Future Hadrian is building autonomous factories that help aerospace and defense companies manufacture rockets, satellites, jets, and ships up to 10x faster and up to 2x cheaper. By combining advanced software, robotics, and full-stack manufacturing, we are reinventing how America produces its most critical parts. We’re accelerating our mission with the launch of Factory 3 in Mesa, Arizona, a 290,000-square-foot facility creating 350 new jobs. We are expanding rapidly to support thousands of future hires, launching Hadrian Maritime to expand into naval production, and introducing a Factory-as-a-Service model that delivers complete systems instead of individual parts. Hadrian is backed by leading investors including T. Rowe Price, Lux Capital, Founders Fund, and Andreessen Horowitz, our fast-growing team is united around reindustrializing American manufacturing for the 21st century and beyond. The Role At Hadrian, the workplace is a critical enabler of speed, focus, and execution. As the company grows rapidly across multiple locations, we need an experienced leader who can design, build, and scale the workplace services function that supports our teams. This role focuses on the environments where our people work every day, including offices, shared spaces, physical security, and non machine related workplace infrastructure at manufacturing sites. We are hiring a Workplace Services Leader to establish and lead the workplace services function at Hadrian. This role is responsible for setting strategy, building and managing the team, and overseeing the programs and vendors that keep our workplaces running smoothly. While this role will roll up sleeves initially due to the size of the team and pace of growth, the primary expectation is to build the team quickly and transition execution to coordinators, specialists, and facilities staff as soon as possible. This is a leadership role for someone who can operate at the systems level, move fast, and create structure while the company is scaling aggressively. What You’ll Do Build and Scale the Workplace Services Function * Establish the workplace services vision, strategy, and operating model across all locations. * Design and rapidly build the workplace services org, including office operations, facilities coordination, physical security, and site support roles. * Hire, onboard, and develop a high performing team capable of executing day to day operations at scale. * Set clear ownership, service levels, and accountability so execution is distributed and consistent. Oversee Workplace Infrastructure and Environment * Oversee office and workplace buildouts, expansions, and reconfigurations across locations. * Provide direction and oversight for initiatives such as soundproofing conference rooms, configuring desk layouts, selecting furniture, and ensuring functional workspaces. * Oversee coordination with electrical, networking, and facilities vendors to ensure all workspaces are powered, connected, and operational. * Oversee workplace infrastructure at manufacturing sites that supports employees, including offices, meeting rooms, break areas, and common spaces. Physical Security Oversight * Oversee the workplace physical security program across all locations. * Provide leadership and direction for access control systems, badge programs, visitor management, and camera vendors. * Partner closely with IT, Security, and EHS on access requirements, incident response coordination, and site readiness. * Ensure physical security programs scale appropriately as new locations open and headcount grows. Lead While Executing Temporarily * Step in as needed to support execution while the team is being built, without becoming the long term executor. * Focus personal effort on unblocking progress, setting direction, and enabling others to execute effectively. * Transition hands on work to team members quickly as roles are hired and onboarded. Vendor, Budget, and Program Ownership * Own vendor strategy, selection, contracts, and performance management for workplace services and physical security. * Own the workplace services budget and forecasting as the company expands. * Balance speed, quality, and cost in a fast growing environment. Cross Functional Leadership * Partner closely with People Operations, IT, Finance, EHS, and other operational teams to ensure workplaces are aligned with company needs. * Collaborate with EHS on workspace design and site changes to ensure safety considerations are incorporated. * Ensure workplaces, access, and services are ready to support rapid onboarding and growth. * Partner with leadership on site strategy and future location planning. Standards and Readiness * Establish and maintain workplace and security policies, documentation, and operating standards. * Ensure high levels of reliability, cleanliness, accessibility, and security across all sites. * Support audits or inspections related to facilities and security in partnership with relevant teams. What We’re Looking For * Significant proven experience in workplace services, facilities management, office operations, physical security, or related functions with increasing leadership scope. * Proven experience building and scaling teams in a high growth environment. * Strong track record of overseeing multi site workplace programs rather than personally executing long term. * Ability to move quickly from zero to structure while prioritizing what matters most. * Experience managing vendors, contractors, and external partners at scale. * Excellent judgment, communication, and stakeholder leadership skills. What Will Set You Apart * Experience supporting rapid headcount growth and opening new locations. * Background in environments that blend office and manufacturing settings. * Strong organizational design instincts and hiring judgment. * Ability to create leverage by building teams and systems quickly. * A pragmatic, ownership driven mindset with a bias toward speed and clarity. * Passion for building environments that help teams operate at their best. Compensation For this role, the target salary range is $155,000 - $205,000 (actual range may vary based on experience and performance). This is the lowest to highest salary we reasonably and in good faith believe we would pay for this role at the time of this posting. We may ultimately pay more or less than the posted range, and the range may be modified in the future. An employee's pay position within the salary range will be based on several factors, including, but not limited to, relevant education, qualifications, certifications, experience, skills, geographic location, performance, and business or organizational needs. Benefits * Medical, dental, vision, and life insurance plans for employees * 401k * Relocation support may be provided for certain situations, based on business need. * Flexible vacation policy ITAR Requirements To conform to U.S. Government space technology export regulations, including the International Traffic in Arms Regulations (ITAR) you must be a U.S. citizen, lawful permanent resident of the U.S., protected individual as defined by 8 U.S.C. 1324b(a)(3), or eligible to obtain the required authorizations from the U.S. Department of State. Learn more about the ITAR here. Hadrian Is An Equal Opportunity Employer It is the Company’s policy to provide equal employment opportunity for all applicants and employees. The Company does not unlawfully discriminate on the basis of race inclusive of traits historically associated with race (including, but not limited to, hair texture and protective hairstyles, such as braids, locks and twists), color, religion, sex (including pregnancy, childbirth, or related medical conditions), gender identity, gender expression, transgender status, national origin (including, in California, possession of a drivers license), ancestry, citizenship, age, physical or mental disability, height or weight, medical condition, family care status, military or veteran status, marital status, domestic partner status, sexual orientation, genetic information, exercise of reproductive rights, any other basis protected by local, state, or federal laws, or any combination of the above characteristics. When necessary, the Company also makes reasonable accommodations for disabled candidates and employees, including for candidates or employees who are disabled by pregnancy, childbirth, or related medical conditions.

Job DescriptionCompany Description Synear Foods USA is a subsidiary of Synear Food Holdings, one of the largest and most established frozen food manufacturers in China. With a strong heritage of quality and innovation, Synear has been serving consumers worldwide for more than two decades. Synear Foods USA focuses on delivering authentic, convenient, and high-quality frozen food products to meet the diverse tastes of North American consumers. Our product portfolio includes a wide range of dumplings, buns, dim sum, and other ready-to-eat favorites, crafted with carefully selected ingredients and strict quality standards. At Synear Foods USA, we are committed to sharing the rich tradition of Asian cuisine while continuously innovating to create products that fit modern lifestyles. Our mission is to bring families and communities together through food that is delicious, convenient, and trustworthy. Synear is an "at-will", equal opportunity employer. We consider applicants for all positions without regard to race, color, creed, religion, national origin or ancestry, sex, age (40 or over), disability, genetic information, veteran status, or any other legally protected status under local, state, or federal law. Job Description • Assist in negotiating prices and contracts with suppliers, and evaluate performance of suppliers, • Perform value analysis of alternative products, suppliers, etc., • Assist in developing tools and reports for decision making on products plan to be purchased, • Assist in supply chain audits, and periodic and special inventory cycle counts. Reconcile reports and address any process related concerns with solutions, • Define and create department standard operating procedures (SOPs) in planning, procurement and logistics, and be able to train first line team members, • Analyze market trends and implement new processes that reduce cost and risk and ensure a quality, reliable(reduction in foreign material) and safe supply chain to achieve a goal of lean manufacturing, • Collaborate with cross functional teams to identify and implement supply chain roadmaps and timelines in alignment with company goals, • Assist in overseeing hiring, training, coaching, and disciplinary actions of department staff and/or contract staff, • Perform other duties as assigned, • Improve the management system, system, process and norms of the procurement department., • Expand supply channels, analyze and properly manage them, and supervise procurement personnel to implement the principle of shopping around while ensuring normal operation, purchase materials at reasonable prices, reduce unnecessary expenses, and ensure the maximum supply of materials with effective funds., • According to the company's development needs, formulate monthly, quarterly and annual procurement plans and fund use plans.Qualifications, • Bachelor’s degree preferred, Master’s degree in Business Administration, Supply Chain Management preferred, • Minimum of 7 years of experience in supply chain management, process improvement, project management, and strategic planning in the food manufacturing industry, • Knowledge and understanding of accounting systems, financial analysis, budgeting and inventory processes, • Must be a team player with excellent interpersonal, organization, and time management skills, • Excellent verbal and written communications skills along with computer skills, including MS Office Suite, Google Applications, and ERP systems, SAP preferred., • Must be able to motivate, coach, train, reward, and recognize employees, • Ability to work flexible schedule depending on the operational needs, • Have a high level of cost awareness and quality awareness: have corresponding financial knowledge and be able to perform cost accounting., • Familiar with procurement processes, familiar with supplier evaluation and assessment, and familiar with relevant quality system standards., • Have good organization and coordination skills within and across departments, good business negotiation, interpersonal communication skills and team management skills Additional Information All your information will be kept confidential according to EEO guidelines.

Job Description K2 is building the largest and highest-power satellites ever flown, unlocking performance levels previously out of reach across every orbit. Backed by $450M from leading investors including Altimeter Capital, Redpoint Ventures, T. Rowe Price, Lightspeed Venture Partners, Alpine Space Ventures, and others – with an additional $500M in signed contracts across commercial and US government customers – we're mass-producing the highest-power satellite platforms ever built for missions from LEO to deep space. The rise of heavy-lift launch vehicles is shifting the industry from an era of mass constraint to one of mass abundance, and we believe this new era demands a fundamentally different class of spacecraft. Engineered to survive the harshest radiation environments and to fully capitalize on today's and tomorrow's massive rockets, K2 satellites deliver unmatched capability at constellation scale and across multiple orbits. With multiple launches planned through 2026 and 2027, we're Building Bigger to develop the solar system and become a Kardashev Type II (K2) civilization. If you are a motivated individual who thrives in a fast-paced environment and you're excited about contributing to the success of a groundbreaking Series C space startup, we'd love for you to apply. The Role You will own the success of custom tooling and structures that will be key to our satellite production and operations. In your first year at K2, you'll work closely with the production teams to help shape build process decisions, architect tooling systems, and execute on individual tools that will support scaling our manufacturing and operations rate and support performing large-scale qualification testing for our multi-ton spacecraft. You will implement and deliver tooling solutions via a combination of hands-on build and collaboration with in-house and out-of-house fabrication resources. Throughout the process you will be hands-on support, educating end customer teams and validating tool performance alongside them. You'll have an opportunity to help shape the company's foundational tooling strategies and processes as we look forward to our mass-abundant goals. Responsibilities • Design and fabricate tooling and material handling systems for K2 Space satellite bus and associated systems and subsystems, • Lead development of satellite subsystem production fixtures from project kickoff through production and beyond, • Drive hands-on development tooling development, sizing and structural analysis of ground support equipment, and continuous improvement of tooling and production operations, • Support the development of ground test setups, flight hardware, development fixtures, and external customer tooling needs, • Bachelor's degree in mechanical, aerospace, or other relevant engineering discipline, • Experience with CAD or FEA software packages (experience can be in a professional, academic, entrepreneurial, or hobby setting), • 5+ years of industry experience with mechanical and/or electromechanical design and analysis, • Hands-on fabrication experience, • Experience with shipping, materials handling, and clean room operations, • Experience with the practical application of GD&T, • Experience with NX (Unigraphics) and Teamcenter PLM, • Experience with performing structural analysis (Simcenter 3D, Femap, or Hypermesh), • Demonstrated ability to own mechanical hardware or systems within an integrated engineering team, • Demonstrated understanding of structural analysis and failure modes of complex mechanical systems in space environments and operations, • Experience with actuators, controls, data acquisition, and dedicated test or automation equipment (examples include actuated positioning tools, motor dynos, vibration tables, environmental data loggers, motorsports DAQ), • Base salary range for this role is $140,000 - $175,000 + equity in the company, • Salary will be based on several factors including, but not limited to: knowledge and skills, education, and experience level If you don't meet 100% of the preferred skills and experience, we encourage you to still apply! Building a spacecraft unlike any other requires a team unlike any other and non-traditional career twists and turns are encouraged! If you need a reasonable accommodation as part of your application for employment or interviews with us, please let us know. Export Compliance As defined in the ITAR, "U.S. Persons" include U.S. citizens, lawful permanent residents (i.e., Green Card holders), and certain protected individuals (e.g., refugees/asylees, American Samoans). Please consult with a knowledgeable advisor if you are unsure whether you are a "U.S. Person." The person hired for this role will have access to information and items controlled by U.S. export control regulations, including the export control regulations outlined in the International Traffic in Arms Regulation (ITAR). The person hired for this role must therefore either be a "U.S. person" as defined by 22 C.F.R. § 120.15 or otherwise eligible for a federally issued export control license. Equal Opportunity K2 Space is an Equal Opportunity Employer; employment with K2 Space is governed on the basis of merit, competence and qualifications and will not be influenced in any manner by race, color, religion, gender, national origin/ethnicity, veteran status, disability status, age, sexual orientation, gender identity, marital status, mental or physical disability or any other legally protected status.

Job Description Overview Pay: $18 per hour + commission Earning potential: $20 – $30 per hour on average with commission Schedule: Weekdays available, weekends required Location: West Covina, CA Join American Residential Services (ARS), the nation’s largest provider of residential HVAC, heating, air conditioning, plumbing, and electrical services, with over 7,000 professionals and 45+ years of trusted home service experience. We are hiring Retail Lead Generators to work inside national home improvement retail stores promoting HVAC services, heating and air conditioning tune-ups, system replacements, and indoor air quality solutions. This is a great opportunity for individuals who enjoy speaking with people and want to earn hourly pay plus commission while introducing homeowners to professional HVAC services and consultations. What We Offer * Weekly pay via direct deposit * Commission paid on top of hourly rate * Paid training — no HVAC experience required * Career path into HVAC Sales Advisor roles * Flexible part-time and full-time schedules Full-time employees also receive: * Insurance available after 31 days * Low-cost medical (as low as $5/week) * Dental, vision, HSA/FSA * 401(k) with company match * Paid time off + holiday pay * Company-paid life insurance Responsibilities As a Retail Lead Generator, you will engage with retail shoppers and introduce them to ARS heating and air conditioning services. * Engage customers inside retail store locations to discuss HVAC upgrades, heating and air conditioning services, and indoor air quality solutions * Promote free in-home HVAC consultations and HVAC tune-ups * Generate leads for residential HVAC service, HVAC installation, and system replacement consultations * Educate homeowners about energy savings and comfort improvements through heating and air conditioning systems * Schedule appointments for HVAC service technicians or HVAC comfort advisors * Represent the ARS brand with professionalism and enthusiasm Qualifications What You Need * Outgoing personality and willingness to speak with shoppers • Retail, kiosk, or sales experience preferred (not required) Ability to stand and walk during shifts * Weekend and some holiday availability * Reliable transportation * Clean, professional appearance representing the ARS brand * Ability to attend weekly in-office meetings • Employment is contingent on a background check in accordance with applicable law *This posting provides details on potential compensation ranges and possibilities. These amounts are not guaranteed and should in no way be construed as an offer. *Sign-On Bonuses only available for roles that have them advertised; amounts are depending on experience and will be paid out according to an offer letter addendum. American Residential Services is an Equal Opportunity Employer. We do not discriminate based on race, color, religion, sex, sexual orientation, gender identity, national origin, disability, veteran status, or other protected characteristics. For more information about how we collect and use personal information, see our privacy policy here: .

Job Description K2 is building the largest and highest-power satellites ever flown, unlocking performance levels previously out of reach across every orbit. Backed by $450M from leading investors including Altimeter Capital, Redpoint Ventures, T. Rowe Price, Lightspeed Venture Partners, Alpine Space Ventures, and others – with an additional $500M in signed contracts across commercial and US government customers – we're mass-producing the highest-power satellite platforms ever built for missions from LEO to deep space. The rise of heavy-lift launch vehicles is shifting the industry from an era of mass constraint to one of mass abundance, and we believe this new era demands a fundamentally different class of spacecraft. Engineered to survive the harshest radiation environments and to fully capitalize on today's and tomorrow's massive rockets, K2 satellites deliver unmatched capability at constellation scale and across multiple orbits. With multiple launches planned through 2026 and 2027, we're Building Bigger to develop the solar system and become a Kardashev Type II (K2) civilization. If you are a motivated individual who thrives in a fast-paced environment and you're excited about contributing to the success of a groundbreaking Series C space startup, we'd love for you to apply. Stay Connected with K2 Space for Future Job Openings on the Operations Team We're on a mission to push the boundaries of what's possible in space systems and large-scale satellite platforms. Even when we don't have a specific opening listed, we're always eager to connect with innovators, builders, and problem-solvers who share our passion for making space more accessible. This is not a job application—it's a way for you to raise your hand and say, "Keep me in the loop." By joining our talent community, you'll: * Receive occasional updates about K2 Space projects, milestones, and future opportunities. * Be among the first to know when a role opens that might align with your skills and interests. * Stay engaged with our growing network of space enthusiasts and professionals. Who Should Join We welcome anyone excited about space technology and exploration—engineers, operators, mission designers, business minds, creatives, and everyone in between—who want to be part of K2 Space's journey. How to Join * Fill out our brief interest form below. * Share a resume and a quick note about your skills, passions, or areas of interest. * We'll keep you on our radar for future opportunities and updates. If you don't meet 100% of the preferred skills and experience, we encourage you to still apply! Building a spacecraft unlike any other requires a team unlike any other and non-traditional career twists and turns are encouraged! If you need a reasonable accommodation as part of your application for employment or interviews with us, please let us know. Export Compliance As defined in the ITAR, "U.S. Persons" include U.S. citizens, lawful permanent residents (i.e., Green Card holders), and certain protected individuals (e.g., refugees/asylees, American Samoans). Please consult with a knowledgeable advisor if you are unsure whether you are a "U.S. Person." The person hired for this role will have access to information and items controlled by U.S. export control regulations, including the export control regulations outlined in the International Traffic in Arms Regulation (ITAR). The person hired for this role must therefore either be a "U.S. person" as defined by 22 C.F.R. § 120.15 or otherwise eligible for a federally issued export control license. Equal Opportunity K2 Space is an Equal Opportunity Employer; employment with K2 Space is governed on the basis of merit, competence and qualifications and will not be influenced in any manner by race, color, religion, gender, national origin/ethnicity, veteran status, disability status, age, sexual orientation, gender identity, marital status, mental or physical disability or any other legally protected status.

Job DescriptionDescription: We are seeking a detail-oriented HR/Payroll Specialist to manage payroll processing and provide support across human resources functions. This role will ensure accurate and timely payroll, assist with benefits administration, and support HR operations including onboarding, compliance, and employee relations. The ideal candidate is organized, proactive, and able to manage multiple priorities in a fast-paced environment. Requirements: Job Summary and Responsibilities; Payroll & Benefits • Process payroll accurately and timely ensuring employees are paid accurately based on each employee’s applicable and agreed upon pay rates, hours worked and deductions., • Maintain accurate payroll records, deductions, garnishments, and direct deposits., • Acknowledge all payroll inquiries, employment verifications, garnishments/levies and unemployment claims within one (1) business day and resolve within required deadlines., • Prepare payroll reports for management and regulatory agencies as required., • Analyze payroll and benefits data to identify trends and recommend improvements. Human Resources Support • Assist with employee benefits program including enrollment, changes, and employee inquiries. This includes accurate payroll deductions, annual open enrollment, mandated reporting, etc., • Assist with the Company’s HRIS updates, onboarding processes and/or technology solutions., • Maintain personnel files and HRIS records in compliance with legal requirements., • At the discretion of the HR/Payroll Director, support employee relations, including policy guidance, conflict resolution, and performance management processes., • Track and process employee leaves of absence (FMLA, CFRA, etc.)., • Assist in implementing HR initiatives and employee engagement programs., • Track and process workers compensation claims within required deadlines., • Ensure compliance with federal, state, and local payroll laws and regulations., • Other duties as assigned and required by the Company.

Job Description K2 is building the largest and highest-power satellites ever flown, unlocking performance levels previously out of reach across every orbit. Backed by $450M from leading investors including Altimeter Capital, Redpoint Ventures, T. Rowe Price, Lightspeed Venture Partners, Alpine Space Ventures, and others – with an additional $500M in signed contracts across commercial and US government customers – we're mass-producing the highest-power satellite platforms ever built for missions from LEO to deep space. The rise of heavy-lift launch vehicles is shifting the industry from an era of mass constraint to one of mass abundance, and we believe this new era demands a fundamentally different class of spacecraft. Engineered to survive the harshest radiation environments and to fully capitalize on today's and tomorrow's massive rockets, K2 satellites deliver unmatched capability at constellation scale and across multiple orbits. With multiple launches planned through 2026 and 2027, we're Building Bigger to develop the solar system and become a Kardashev Type II (K2) civilization. If you are a motivated individual who thrives in a fast-paced environment and you're excited about contributing to the success of a groundbreaking Series C space startup, we'd love for you to apply. The Role K2's plan doesn't stop at satellite buses, however. By operating our own vehicles and manifesting regular rides to space, K2 is uniquely positioned to design, test, and deploy-at-scale ambitious optical payloads in MEO, GEO, cis-lunar, and deep space on unprecedented timelines. The satellite bus is the platform – the payloads are the mission. There are any number of space-based optical payloads that can generate value here on Earth (ex. forest fire detection, climate and atmospheric monitoring, etc.) and further planetary science in our solar system (ex. hyper-spectral imaging, laser-altimetry) -- all of which require payload-specific optics benches with spectral / spatial filters, beam-shaping optics, image scanning / stabilization mechanisms, electro-optical sensors, fiber-to-free space interfaces, etc. coupled to large aperture, diffraction-limited telescopes for collecting and transmitting optical energy from the UV to the infrared. As an Optical Systems Engineer, you will contribute to defining how K2 designs, manufactures, tests, and deploys optics benches across K2's optical payload suite. You will be involved in every phase of your optical system's life cycle, from initial feasibility and architectural trade studies through manufacturing, ground testing, and on-orbit commissioning. The development timelines and manufacturing scale that we are targeting require meaningful innovation, but you will have the resources and full support of K2 to make this possible and help raise the bar for the next generation of space technology companies. Responsibilities • Responsible for delivering the..., • system architecture, SNR budget, and system-specific modeling (ex. stray light, fiber coupling);, • detailed optical design and tolerancing;, • development plan (risk reduction timeline, division of labor, test strategy);, • environmental qualification and reliability testing;, • technical leadership of vendors and external partners, including component qualification, supply-chain development, and transition to volume manufacturing; and, • Collaborate with the optical and satellite bus teams to determine feasibility and optimal system requirements for optical payloads., • Prepare design reviews for your optical system to get stakeholder buy-in and communicate expectations to the hardware, software, test, and manufacturing teams., • Forecast staffing needs, define roles, and interview candidates to ensure the optical payloads team is staffed appropriately to deliver on schedule., • Mentor the engineers supporting you to make them more capable and autonomous in the realm of optical system development in the future – scoping work, providing feedback throughout, and reviewing and signing off on the quality of their work., • Manufacturing is a major emphasis of this role. For any in-house fabrication and assembly, you'll be responsible for the evaluation and selection of manufacturing equipment and working with the production team to develop a factory layout, work instructions, in-process checkouts, and end-of-line tests to ensure successful builds. Qualifications • Bachelor's degree in physics, optics, computer science, mechanical engineering, electrical engineering, or a related technical field., • 8+ years of experience in the design, manufacture, and test of optical systems., • Familiarity with high-volume manufacturing – broad knowledge of manufacturing techniques, design for manufacturability, supply chain management, and productionization of assembly and test processes., • Experience with optical mechanisms – specifying their requirements, knowledge of feedback and actuation methods, basic controls analysis, quantifying mechanism error, and system-level testing., • Deep knowledge of electro-optical sensing technologies (ie. focal plane arrays, photodiodes, etc.) – their non-idealities, noise mechanisms, and mitigations, testing and characterization, and practical implementation / system integration details., • Experience conducting experimental research, data analysis, and visualizing esoteric datasets., • Base salary range for this role is $190,000 - $280,000 + equity in the company, • Salary will be based on several factors including, but not limited to: knowledge and skills, education, and experience level If you need a reasonable accommodation as part of your application for employment or interviews with us, please let us know. Export Compliance As defined in the ITAR, "U.S. Persons" include U.S. citizens, lawful permanent residents (i.e., Green Card holders), and certain protected individuals (e.g., refugees/asylees, American Samoans). Please consult with a knowledgeable advisor if you are unsure whether you are a "U.S. Person." The person hired for this role will have access to information and items controlled by U.S. export control regulations, including the export control regulations outlined in the International Traffic in Arms Regulation (ITAR). The person hired for this role must therefore either be a "U.S. person" as defined by 22 C.F.R. § 120.15 or otherwise eligible for a federally issued export control license. Equal Opportunity K2 Space is an Equal Opportunity Employer; employment with K2 Space is governed on the basis of merit, competence and qualifications and will not be influenced in any manner by race, color, religion, gender, national origin/ethnicity, veteran status, disability status, age, sexual orientation, gender identity, marital status, mental or physical disability or any other legally protected status.

Job Description Aflac, an esteemed leader in the insurance industry, is actively seeking a dynamic candidate to join our distinguished team. This role presents an exceptional opportunity in the Business-to-Business sector, boasting a highly lucrative compensation structure and flexible scheduling that prioritizes work-life balance and career development. Check out more about us at: @dtlametroregion on Instagram As an Associate at Aflac, you will be entrusted with contributing to our esteemed sales environment with enthusiasm, dedication, and a drive for success. This role offers an immersive experience in professional benefits education, coupled with the potential for rapid career growth and advancement opportunities. Our Benefit Specialists play a crucial role in educating our clients' employees. They will assist with presentations, provide in-person customer service, and help individuals understand their employer provided benefits packages. In this role your primary responsibility is to serve as a valuable resource to all clients and their employees. We are looking for candidates who have: -1–3 years of experience in Customer Service or Client Services -Experience in the Healthcare or Insurance industry (preferred) -A desire to grow within their company, potentially seeking management roles in the future -Strong presentation and communication skills -Proficiency with Microsoft Excel, Word, Documents, Slides, and related tools -Ability to quickly learn and adapt to new online CRM or ATS systems Our comprehensive Fortune 500 Corporate Training that is supplemented by the esteemed Aflac Flight Academy's world-class program, equips all team members with the necessary skills for success. Additionally, qualified candidates will have access to extensive management and leadership training within our mentorship model. We are seeking individuals who embody ambition, integrity, and a commitment to excellence. If you are ready to embark on a rewarding career path with unparalleled earning potential and professional development, we encourage you to apply and become part of our team! This is a prestigious employment opportunity that requires a two step interview process. If you are unable to commit to multiple interviews, please do not apply. This is not a salaried position as our Aflac associates earn commissions, bonuses, residual income, and stock. Aflac associates are independent agents and are not Aflac employees. Aflac’s family of insurers includes Aflac and/or Aflac New York, and/or Continental American Insurance Company and/or Continental American Life Insurance Company. Type: Full or Part Time Pay Range: 50-80K Yearly Hybrid Work Schedule wth Flexibility

Job Description K2 is building the largest and highest-power satellites ever flown, unlocking performance levels previously out of reach across every orbit. Backed by $450M from leading investors including Altimeter Capital, Redpoint Ventures, T. Rowe Price, Lightspeed Venture Partners, Alpine Space Ventures, and others – with an additional $500M in signed contracts across commercial and US government customers – we're mass-producing the highest-power satellite platforms ever built for missions from LEO to deep space. The rise of heavy-lift launch vehicles is shifting the industry from an era of mass constraint to one of mass abundance, and we believe this new era demands a fundamentally different class of spacecraft. Engineered to survive the harshest radiation environments and to fully capitalize on today's and tomorrow's massive rockets, K2 satellites deliver unmatched capability at constellation scale and across multiple orbits. With multiple launches planned through 2026 and 2027, we're Building Bigger to develop the solar system and become a Kardashev Type II (K2) civilization. If you are a motivated individual who thrives in a fast-paced environment and you're excited about contributing to the success of a groundbreaking Series C space startup, we'd love for you to apply. The Role You will be responsible for simulating and verifying the software used to fly and orchestrate the behavior of some of the largest satellites that have ever been flown, using both hardware-in-the-loop and hardware-out-of-the-loop testing. Where needed, you will be able to step into different parts of the software stack to drive solutions end-to-end and even make changes to vehicle control software. In your first 6 months you will generalize simulation software architecture to allow testing and designing multiple spacecraft, demonstrating robust performance in demanding missions. In your first year you will design many-agent simulations and design tools for operating entire constellations of satellites, informing critical company decisions. Responsibilities • Create and maintain simulation software infrastructure for our 20kW+ spacecraft, • Develop physics-based software models of spacecraft subsystems, including propulsion, attitude control, power, and communications systems., • Perform analyses of constellation capabilities and performance to support business and engineering decisions, including network coverage and beam planning., • Create and utilize robust tools to allow for rapid deployment of quality code., • Perform data analysis and anomaly investigation to identify and resolve on-orbit problems., • Bachelor's degree in physics, aerospace/mechanical/electrical engineering, computer science, math, or a STEM field or 3+ years of professional experience in software engineering or relevant professions, • Development experience in Rust, C++, or similar compiled language, • Experience using scientific Python (NumPy, SciPy, etc.), Julia, MATLAB, or similar, • 3+ years of professional experience in software engineering, • Master's or PhD in physics, aerospace engineering, or a STEM field, • Experience working in Rust production environments, • Experience defining and creating simulation systems, • Experience with Monte Carlo simulations and probability/statistics, • Experience with linear algebra, controls, and/or orbital mechanics, • Basic knowledge of electronics, Linux, and computer architecture, • Experience with space communication modeling (RF, ground stations), • Base salary range for this role is $123,000 - $200,000 + equity in the company, • Salary will be based on several factors including, but not limited to: knowledge and skills, education, and experience level If you need a reasonable accommodation as part of your application for employment or interviews with us, please let us know. Export Compliance As defined in the ITAR, "U.S. Persons" include U.S. citizens, lawful permanent residents (i.e., Green Card holders), and certain protected individuals (e.g., refugees/asylees, American Samoans). Please consult with a knowledgeable advisor if you are unsure whether you are a "U.S. Person." The person hired for this role will have access to information and items controlled by U.S. export control regulations, including the export control regulations outlined in the International Traffic in Arms Regulation (ITAR). The person hired for this role must therefore either be a "U.S. person" as defined by 22 C.F.R. § 120.15 or otherwise eligible for a federally issued export control license. Equal Opportunity K2 Space is an Equal Opportunity Employer; employment with K2 Space is governed on the basis of merit, competence and qualifications and will not be influenced in any manner by race, color, religion, gender, national origin/ethnicity, veteran status, disability status, age, sexual orientation, gender identity, marital status, mental or physical disability or any other legally protected status.

Job DescriptionDescription: Balance Health is the nation’s premier comprehensive lower-extremity focused Physician Practice Company. We provide leading podiatrists, orthopedic surgeons, and physical therapists with operational support so they can spend their time focused on growing their business and delivering exceptional patient care. We have an immediate need to hire an experienced part time Histotechnician to work on site in our Santa Monica, CA lab. We offer comprehensive pay, benefit package and PTO. If you meet the qualifications noted below, we look forward to receiving your application. ESSENTIAL FUNCTIONS: The histotechnician assists in performing all functions related to preparation of specimens and slides for pathologist examination, including gross examination, preparation and cutting of blocks, preparation and staining of slides. Maintains tissues, blocks, and slides after examination according to policy. Performs all safety, maintenance and quality control activities appropriate for the technical area including: · Specimen Accessioning · Specimen Embedding and Microtomy · QC/QA Participation · Filing of blocks and slides and slide distribution · Participation in supply inventory management and ordering if applicable · Proper use of LIS; Novopath · Utilizing, maintaining, and troubleshooting all equipment; tissue processors (Sakura Tissue-Tek VIP, Sakura Tissue Tek-Prisma 6131 slide stainer and linked automated coverslipper and all histology equipment). · H/E and special staining and preparation of solutions Requirements: QUALIFICATIONS: [Education, Training, Knowledge, Skills, Abilities, and Expected Behaviors] § Bachelor’s degree or equivalent in a related scientific discipline or Accredited associate’s degree (or 60+ credit hours) or certificate program with certification as a Technician by the American Society for Clinical Pathology (ASCP) § 3+ years of relevant experience in an anatomic pathology laboratory is preferred § Excellent listening, verbal, and written communication skills § Must demonstrate highly ethical behavior and good judgment including the ability to always maintain the utmost confidentiality. § Ability to ensure accurate, timely completion of assigned responsibilities. § Ability to build rapport and interact collaboratively with team members. § Respectfully accepts coaching and guidance understanding it is intended to impart knowledge and help with career development and growth. § Highly PC Proficient with good working knowledge of Microsoft Office, including Excel, Word, and Outlook, database systems. § Proof of legal eligibility to work in the United States without sponsorship now or in the future. § Ability to successfully pass an in-depth background investigation, including credit check and with a clean DMV report. or any combination of academic education, professional training, and development along with applied work experience that demonstrates the ability to successfully perform the essential functions of the position. Compensation / Benefits: · Competitive pay range $30 - $40/hour depending on applicable experience level. · Benefit eligibility for FT employees working 30+ hours weekly begins first of the month following 30 days of employment. · Eligibility to participate in our 401(k) program begins first of the month following 60 days of employment Medical, Dental, and Vision Plans · HSA with Employer Contribution · FSA Option · Generous PTO Program · Employee Assistance Program · Life and AD&D Insurance · Short-Term and Long-Term Disability Balance Health provides equal employment opportunities to all qualified applicants and employees without regard to any legally protected classes, including, but not limited to age, gender, gender identity, genetic information, marital status, medical condition, mental/physical disability, national origin, pregnancy, race/color, religion, sexual orientation, or military/veteran status. If an offer of employment is extended and a candidate hired, proof of authorization to work in the US and/or U.S. citizenship must be provided. Visit our Website @ (Only qualified candidates will be considered and/or contacted.) NO PHONE CALLS OR RECRUITERS / STAFFING AGENCIES PLEASE

Job Description Overview Pay: $18 per hour + commission Earning potential: $20 – $30 per hour on average with commission Schedule: Weekdays available, weekends required Location: Pasadena, CA Join American Residential Services (ARS), the nation’s largest provider of residential HVAC, heating, air conditioning, plumbing, and electrical services, with over 7,000 professionals and 45+ years of trusted home service experience. We are hiring Retail Lead Generators to work inside national home improvement retail stores promoting HVAC services, heating and air conditioning tune-ups, system replacements, and indoor air quality solutions. This is a great opportunity for individuals who enjoy speaking with people and want to earn hourly pay plus commission while introducing homeowners to professional HVAC services and consultations. What We Offer * Weekly pay via direct deposit * Commission paid on top of hourly rate * Paid training — no HVAC experience required * Career path into HVAC Sales Advisor roles * Flexible part-time and full-time schedules Full-time employees also receive: * Insurance available after 31 days * Low-cost medical (as low as $5/week) * Dental, vision, HSA/FSA * 401(k) with company match * Paid time off + holiday pay * Company-paid life insurance Responsibilities As a Retail Lead Generator, you will engage with retail shoppers and introduce them to ARS heating and air conditioning services. * Engage customers inside retail store locations to discuss HVAC upgrades, heating and air conditioning services, and indoor air quality solutions * Promote free in-home HVAC consultations and HVAC tune-ups * Generate leads for residential HVAC service, HVAC installation, and system replacement consultations * Educate homeowners about energy savings and comfort improvements through heating and air conditioning systems * Schedule appointments for HVAC service technicians or HVAC comfort advisors * Represent the ARS brand with professionalism and enthusiasm Qualifications What You Need * Outgoing personality and willingness to speak with shoppers • Retail, kiosk, or sales experience preferred (not required) Ability to stand and walk during shifts * Weekend and some holiday availability * Reliable transportation * Clean, professional appearance representing the ARS brand * Ability to attend weekly in-office meetings • Employment is contingent on a background check in accordance with applicable law *This posting provides details on potential compensation ranges and possibilities. These amounts are not guaranteed and should in no way be construed as an offer. *Sign-On Bonuses only available for roles that have them advertised; amounts are depending on experience and will be paid out according to an offer letter addendum. American Residential Services is an Equal Opportunity Employer. We do not discriminate based on race, color, religion, sex, sexual orientation, gender identity, national origin, disability, veteran status, or other protected characteristics. For more information about how we collect and use personal information, see our privacy policy here: .

Job Description Hadrian - Manufacturing the Future Hadrian is building autonomous factories that help aerospace and defense companies manufacture rockets, satellites, jets, and ships up to 10x faster and up to 2x cheaper. By combining advanced software, robotics, and full-stack manufacturing, we are reinventing how America produces its most critical parts. We’re accelerating our mission with the launch of Factory 3 in Mesa, Arizona, a 290,000-square-foot facility creating 350 new jobs. We are expanding rapidly to support thousands of future hires, launching Hadrian Maritime to expand into naval production, and introducing a Factory-as-a-Service model that delivers complete systems instead of individual parts. Hadrian is backed by leading investors including T. Rowe Price, Lux Capital, Founders Fund, and Andreessen Horowitz, our fast-growing team is united around reindustrializing American manufacturing for the 21st century and beyond. What you’ll do: * Define and own product strategy and requirements from discovery and requirements definition to launch, adoption, and iteration. * Provide cross-functional leadership and communication to drive product success and accomplishment of business objectives, not only for current product lines but across the portfolio as we continue to expand. * Work closely with and source requirements directly from the users you’re designing for, including: Technicians, CAD programmers, Manufacturing engineers, Operations leadership, etc. * Translate customer workflows into clear software and hardware requirements with a seamless user experience. * Synthesize and collaborate with core stakeholders to build the product roadmap ensuring business objectives are achieved, stakeholders are informed, and efforts are prioritized appropriately. * Maintain a complete system approach to problem solving ensuring all interdependencies, future expansion, and change management are accounted for. * Actively contribute to the product management culture and foundation of product management at Hadrian. What we are looking for * 5+ years of product management experience, including at least 3+ years of experience in hardware, software and/or robotics. * Strong track record of delivering end-to-end success across complex hardware and software systems. * Ability to assess the essence of the problem, provide a structured approach to finding solutions, and organization to align the team. * Proven ability to think critically about tactical challenges while also maintaining a clear long term strategic perspective. * Ease in aligning and prioritizing cross-functional teams, including engineering, operations, and supply chain. * Experience synthesizing a variety of inputs into a product roadmap that ultimately achieves business objectives. * Enthusiasm towards the mission of rebuilding the American industrial base. * Organization and ability to build processes and align diverse groups of stakeholders. * Strong data driven approach with experience leveraging metrics, dashboards, and analytics to inform decisions. * Familiarity with CNC Machining, additive manufacturing, MES/ERP systems, or factory automation preferred but not required. Compensation For this role, the target salary range is $170,000 - $240,000 (actual range may vary based on experience and performance). This is the lowest to highest salary we reasonably and in good faith believe we would pay for this role at the time of this posting. We may ultimately pay more or less than the posted range, and the range may be modified in the future. An employee's pay position within the salary range will be based on several factors, including, but not limited to, relevant education, qualifications, certifications, experience, skills, geographic location, performance, and business or organizational needs. Benefits * Medical, dental, vision, and life insurance plans for employees * 401k * Relocation support may be provided for certain situations, based on business need. * Flexible vacation policy ITAR Requirements To conform to U.S. Government space technology export regulations, including the International Traffic in Arms Regulations (ITAR) you must be a U.S. citizen, lawful permanent resident of the U.S., protected individual as defined by 8 U.S.C. 1324b(a)(3), or eligible to obtain the required authorizations from the U.S. Department of State. Learn more about the ITAR here. Hadrian Is An Equal Opportunity Employer It is the Company’s policy to provide equal employment opportunity for all applicants and employees. The Company does not unlawfully discriminate on the basis of race inclusive of traits historically associated with race (including, but not limited to, hair texture and protective hairstyles, such as braids, locks and twists), color, religion, sex (including pregnancy, childbirth, or related medical conditions), gender identity, gender expression, transgender status, national origin (including, in California, possession of a drivers license), ancestry, citizenship, age, physical or mental disability, height or weight, medical condition, family care status, military or veteran status, marital status, domestic partner status, sexual orientation, genetic information, exercise of reproductive rights, any other basis protected by local, state, or federal laws, or any combination of the above characteristics. When necessary, the Company also makes reasonable accommodations for disabled candidates and employees, including for candidates or employees who are disabled by pregnancy, childbirth, or related medical conditions.

Job Description Overview Ansible Government Solutions, LLC (Ansible) is currently recruiting for Nuclear Medicine Technologists (NMT) to support the VA Long Beach Healthcare System (Tibor Rubin VA Medical Center) located at 5901 East 7th St, Long Beach, CA 90822. Available shift schedules include days, evenings, and nights. If you accept employment with Ansible, you must also acknowledge that any assigned schedule is subject to change at the direction of either Ansible or its customers. Ansible Government Solutions, LLC (Ansible) is a Service-Disabled Veteran-Owned Small Business (SDVOSB) providing Federal customers with solutions in many arenas. Our customers face wide-ranging challenges in the fields of national security, health care, and information technology. To address these challenges, we employ intelligent and committed staff who take care of our customers’ success as if it is their own. Responsibilities • Performs quality controls on equipment used each day, and performs and processes a wide range of clinical nuclear medicine studies including PET/CT, general Nuclear Medicine, and cardiac imaging, • Prepares and administers radioactive substances according to guidelines and protocols, set by the Nuclear Medicine Department, the hospital Radiation Safety Department, and other requirements established by has the NRC and NHPP, • Maintains familiarity with the requirements for each test and is able to assess the condition of the patient, their ability to undergo the procedure, compliance to preparation instructions, and medication conflicts, • Evaluates the quality of images taken and additional images when necessary, • Performs related clerical duties such as sending images to PACS, archiving images, and case editing of computer requests and reports, • Sets up radiographic suites and ensures that sterile supplies, contrast materials, catheters, and other required equipment/supplies are present and available, • Prepares and administers contrast material orally, by enema, or under close supervision of radiologists, intravenously but not independently; as required by procedure or patient’s condition, monitors vital signs (blood pressure and heart rate), and reports any significant changes to a radiologist, • Lifts, positions, pushes, and transfers patients, supplies, and/or equipment as needed, • Performs related clerical duties such as sending images to PACS, archiving images, and case editing of computer requests and reports, • English language proficiency, • ARRT(N) and/or NMTCB CNMT certified (either is required), • Graduate of an accredited Joint Review Committee on Education of Radiologic Technologists (JRCERT) program, and have a minimum of two (2) years of work experience, • Note - Student internship and training time spent in a radiology setting does not count toward the two (2) years of experience, • Experience with Picture Archiving Communication System (PACS), experience with Agfa PACS is preferred but not required, • Sit, stand, walk, lift, squat, bend, twist, and reach above shoulders during the work shift, • Lift up to 50 lbs from floor to waist, • Lift up to 20 lbs, • Carry up to 40 lbs a reasonable distance Powered by JazzHR cjhJfCOKuu

Job Description K2 is building the largest and highest-power satellites ever flown, unlocking performance levels previously out of reach across every orbit. Backed by $450M from leading investors including Altimeter Capital, Redpoint Ventures, T. Rowe Price, Lightspeed Venture Partners, Alpine Space Ventures, and others – with an additional $500M in signed contracts across commercial and US government customers – we're mass-producing the highest-power satellite platforms ever built for missions from LEO to deep space. The rise of heavy-lift launch vehicles is shifting the industry from an era of mass constraint to one of mass abundance, and we believe this new era demands a fundamentally different class of spacecraft. Engineered to survive the harshest radiation environments and to fully capitalize on today's and tomorrow's massive rockets, K2 satellites deliver unmatched capability at constellation scale and across multiple orbits. With multiple launches planned through 2026 and 2027, we're Building Bigger to develop the solar system and become a Kardashev Type II (K2) civilization. If you are a motivated individual who thrives in a fast-paced environment and you're excited about contributing to the success of a groundbreaking Series C space startup, we'd love for you to apply. The Role You will own the success of the RF-related mechanical structures and any associated mechanisms that will be core RF hardware components for the largest, most powerful satellites in the industry. In your first 6 months, you will define mechanical requirements, create initial concepts and trades, perform preliminary and detailed analysis, define development test campaigns, trade and select any purchased RF mechanical subsystems, and produce development hardware. In your first year, you will validate your designs through prototype iterations and build and qualify flight hardware. To achieve this, you'll work alongside partners across electrical hardware, test, software, manufacturing, integration, and operations to execute your vision for the highest capability satellite RF mechanical systems in the industry. Responsibilities • Take RF mechanical hardware from conceptual design through qualification to on-orbit operations in order to support internal and external customer needs, • Lead design reviews from kickoff through qualification and beyond, • Drive mechanical hardware development, including hands-on development testing, analysis correlation, and follow-on hardware iterations, • Perform hardware trades that steer both RF mechanical sub-system and top-level RF hardware direction, • Collaborate with a cross-functional RF team to establish mechanical hardware product requirements, company processes, and best practices for hardware design and manufacturing, • Bachelor's degree in mechanical, aerospace, or other relevant engineering discipline, • 2+ years of experience with mechanical and/or electromechanical design and analysis, • Experience with CAD or FEA software packages, • Experience with the practical application of GD&T, • Demonstrated proficiency in the principles of mechanical design, materials, thermodynamics, and thermal solutions, • Experience designing, building, and testing RF systems, antenna design, and deployment mechanisms for aerospace applications (satellite mechanical systems, payloads, launch vehicles, propulsion systems, and/or aircraftstructures and mechanisms), • Experience with NASA-STD-5017, SMC-S-016, and GSFC-STD-7000 for the design and qualification of in-space Moving Mechanism Assemblies and electronics enclosures, • Demonstrated ability to own mechanical hardware or systems within an integrated engineering team outside a classroom setting, • Demonstrated understanding of structural analysis and failure modes of complex mechanical systems in space environments and operations, • Independent and self-motivated mindset, with strong organizational, written, and oral communication skills, • Base salary range for this role is $100,000– $140,000 + equity in the company, • Salary and level will be based on several factors including, but not limited to: knowledge and skills, education, and experience level If you need a reasonable accommodation as part of your application for employment or interviews with us, please let us know. Export Compliance As defined in the ITAR, "U.S. Persons" include U.S. citizens, lawful permanent residents (i.e., Green Card holders), and certain protected individuals (e.g., refugees/asylees, American Samoans). Please consult with a knowledgeable advisor if you are unsure whether you are a "U.S. Person." The person hired for this role will have access to information and items controlled by U.S. export control regulations, including the export control regulations outlined in the International Traffic in Arms Regulation (ITAR). The person hired for this role must therefore either be a "U.S. person" as defined by 22 C.F.R. § 120.15 or otherwise eligible for a federally issued export control license. Equal Opportunity K2 Space is an Equal Opportunity Employer; employment with K2 Space is governed on the basis of merit, competence and qualifications and will not be influenced in any manner by race, color, religion, gender, national origin/ethnicity, veteran status, disability status, age, sexual orientation, gender identity, marital status, mental or physical disability or any other legally protected status.

Job Description Hadrian - Manufacturing the Future Hadrian is building autonomous factories that help aerospace and defense companies manufacture rockets, satellites, jets, and ships up to 10x faster and up to 2x cheaper. By combining advanced software, robotics, and full-stack manufacturing, we are reinventing how America produces its most critical parts. We’re accelerating our mission with the launch of Factory 3 in Mesa, Arizona, a 290,000-square-foot facility creating 350 new jobs. We are expanding rapidly to support thousands of future hires, launching Hadrian Maritime to expand into naval production, and introducing a Factory-as-a-Service model that delivers complete systems instead of individual parts. Hadrian is backed by leading investors including T. Rowe Price, Lux Capital, Founders Fund, and Andreessen Horowitz, our fast-growing team is united around reindustrializing American manufacturing for the 21st century and beyond. The Role Hadrian is seeking a Director of Quality to build and scale the company’s central Quality Management System across a rapidly expanding network of factories, capabilities, and regulatory environments. This is a critical leadership role responsible for defining how quality operates across the company and ensuring quality is embedded into every part of the system. This person will design and deploy a modular quality system that supports multiple factory types, product categories, and certifications while maintaining consistency, speed, and high confidence in product quality. As Hadrian expands into aerospace, defense, naval programs, and new manufacturing domains such as additive manufacturing, non-destructive testing, and electronics, this leader will be responsible for interpreting and applying complex regulatory and customer requirements in a way that aligns with intent, risk, and operational reality. The Director of Quality will also build and scale a high-performing central quality organization, partnering closely with factory leadership, engineering, customer operations, and product teams to create scalable systems, strong feedback loops, and clear decision-making across the business. What You’ll Do * Design and build a modular Quality Management System that supports multiple factories, product types, and regulatory scopes * Define global quality standards and determine where factory- or program-specific systems are required * Deploy QMS packages that enable new factories to launch at a high level of maturity * Partner with Factory Development Engineering to implement quality systems in new and existing facilities * Own Hadrian’s approach to operating across aerospace, defense, and naval regulatory environments * Translate regulatory and customer requirements into clear, practical systems and workflows * Ensure consistent interpretation of requirements across factories while applying them based on intent and risk * Build a multi-layer audit system across factories and use audit outputs to improve process design, training, and system definition * Own cross-factory quality performance, including the escalation and classification of non-conformances, escapes, and findings * Build quality data systems that enable aggregation, trend analysis, and prioritization of improvements * Drive feedback loops that inform engineering, operations, and capability roadmaps * Own system-level customer quality interactions, including audits, requirement alignment, escapes, findings, and corrective actions * Make or delegate final decisions on complex or ambiguous quality issues * Hire, develop, and lead a high-performing central quality organization, including systems and audit leaders What We’re Looking For * Bachelor’s degree in Engineering or a related technical field * 8+ years of experience in quality, manufacturing engineering, or related leadership roles * Experience operating in regulated manufacturing environments such as aerospace, defense, industrial, or similar * Demonstrated ability to build, scale, or significantly improve systems, processes, or organizations in complex environments * Experience leading and developing high-performing teams, including hiring, coaching, and scaling organizational capability * Demonstrated ability to make strong decisions in ambiguous, high-risk situations, particularly those involving customer-facing outcomes * Strong problem-solving and decision-making skills in complex environments * Excellent communication and cross-functional leadership skills across engineering, operations, and commercial teams What Will Set You Apart * Experience building or scaling Quality Management Systems across multiple sites, factories, or business units * Experience working across multiple regulatory regimes such as FAA, AS9100, defense, naval programs, or similar environments * Experience supporting new or evolving manufacturing capabilities such as additive manufacturing, electronics, or special processes * Strong track record of balancing compliance requirements with practical, scalable implementation * Experience building systems for quality data, analytics, and feedback loops that drive operational or engineering improvements * Experience in high-growth or startup manufacturing environments * Background spanning both technical and operational roles, including quality, manufacturing engineering, or operations leadership Benefits * Medical, dental, vision, and life insurance plans for employees * 401k * Relocation support may be provided for certain situations, based on business need. * Flexible vacation policy ITAR Requirements To conform to U.S. Government space technology export regulations, including the International Traffic in Arms Regulations (ITAR) you must be a U.S. citizen, lawful permanent resident of the U.S., protected individual as defined by 8 U.S.C. 1324b(a)(3), or eligible to obtain the required authorizations from the U.S. Department of State. Learn more about the ITAR here. Hadrian Is An Equal Opportunity Employer It is the Company’s policy to provide equal employment opportunity for all applicants and employees. The Company does not unlawfully discriminate on the basis of race inclusive of traits historically associated with race (including, but not limited to, hair texture and protective hairstyles, such as braids, locks and twists), color, religion, sex (including pregnancy, childbirth, or related medical conditions), gender identity, gender expression, transgender status, national origin (including, in California, possession of a drivers license), ancestry, citizenship, age, physical or mental disability, height or weight, medical condition, family care status, military or veteran status, marital status, domestic partner status, sexual orientation, genetic information, exercise of reproductive rights, any other basis protected by local, state, or federal laws, or any combination of the above characteristics. When necessary, the Company also makes reasonable accommodations for disabled candidates and employees, including for candidates or employees who are disabled by pregnancy, childbirth, or related medical conditions.