Article jobs in Yonkers, New YorkCreate job alerts

Job Description Reports To: Program Director Program: OnTrack, NY Location: Yonkers, NY Hours Per Week: 40 FLSA Status: Full Time, Exempt Salary Range: $58,350 - $81,600 annually Summary Description: The OnTrack Primary Clinician will be part of a small, multidisciplinary team providing coordinated and assertive treatment to adolescents and young adults (16-30 years old) who are within two years of experiencing the first onset of psychosis. The clinician will serve as the point person for participants and their families, offering supportive therapy, psychoeducation, behavioral interventions, and family support. The role also includes engaging with the participant's social and community environments to promote effective transitions and care continuity. Training for this role is provided through the statewide OnTrackNY Initiative at the Center for Practice Innovations at Columbia Psychiatry and the New York State Research Foundation for Mental Hygiene. Key Responsibilities: • Serve as the primary point of contact for participants and their families., • Provide psychoeducation on first-episode psychosis (FEP) and the goals of the OnTrackNY program., • Offer supportive therapy and behavioral interventions, with an emphasis on family support., • Conduct clinical assessments to determine participants' social functioning and substance use using a shared decision-making (SDM) framework., • Provide training in social skills, substance abuse treatment, behavioral activation, coping skills, and psychoeducation., • Connect participants and families with necessary services and support., • Develop and modify treatment plans collaboratively with clients using shared decision-making., • Provide services off-site as needed, based on participant and family preferences., • Conduct needs assessments, safety planning, and wellness management planning with participants., • Facilitate participants' transition from the team to other services and supports, ensuring stable links upon discharge., • Attend weekly team meetings., • Perform other designated and related duties. Key Competencies: • Experience in an Article 31 Mental Health Clinic (preferred)., • Experience in outreach to underserved populations and working with individuals with serious and persistent mental illness., • Knowledge of city, state, and federal guidelines and laws affecting mental health treatment and reporting procedures., • High degree of computer literacy and familiarity with Electronic Health Record systems., • Recovery-oriented, evidence-based clinical practice (preferred)., • Experience with dually diagnosed individuals and diverse populations (preferred)., • Understanding the impact of culture on mental health practices., • Demonstrated commitment to diversity, equity, inclusion, and cultural humility. Key Performance Indicators (KPIs): • Quality and effectiveness of therapeutic and supportive services provided., • Level of engagement with participants and families., • Success in establishing and maintaining connections with relevant services and supports., • Timeliness and accuracy of clinical documentation and assessments., • Active participation in team meetings and adherence to program protocols. Requirements: • New York State licenses: LMSW, LMHC, Psychologist, or LCSW., • Legally eligible to work in the United States., • Ability to work independently and maintain confidentiality., • Ability to participate in multiple hours of live video training, • Bi-lingual Spanish (preferred)., • Basic Community System Knowledge and Microsoft Office proficiency, • Valid Driver’s License with a satisfactory driving record., • Clearance through fingerprinting and various state and federal registries (e.g., NYS Justice Center, SEL, NYS Medicaid Exclusion List, DCJS NYS Sex Offender Registry, NYS OCFS). Mandated Reporter: This is a Mandated Reporter position. The NYS Justice Center legislation defines anyone who has regular and substantial contact with any person with special needs as a “custodian” under the law and, therefore, a mandated reporter. You can be held liable by both the civil and criminal legal systems for intentionally failing to make a report. Greater Mental Health of New York is an equal opportunity employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, disability, age, sexual orientation, gender identity, national origin, veteran status, or genetic information. Greater Mental Health of New York is committed to providing access, equal opportunity, and reasonable accommodation for individuals with disabilities in employment, its services, programs, and activities. To request a reasonable accommodation, contact the Human Resources Department.

Job DescriptionSenior Mold Designer & Toolmaker Location: Westchester County NYEmployment Type: Full-Time Position OverviewWe are seeking an experienced Senior Mold Designer & Toolmaker to join our aerospace and defense electronics manufacturing team. This critical role supports the production of ultra-miniature transformers, inductors, power supplies, and magnetic components for military, aerospace, and mission-critical applications. The successful candidate will design and fabricate precision tooling for components that operate in extreme environments, from Mars rovers to submarine systems, requiring exceptional reliability and miniaturization expertise. Key ResponsibilitiesDesign & Engineering • Design and develop ultra-precision injection molds and tooling for miniature magnetic components, • Create tooling for transformer housings, inductor enclosures, and power supply modules with dimensions as small as 0.31" x 0.31" x 0.34", • Develop micro-molding solutions for components operating from -55°ree;C to +130°ree;C temperature ranges, • Design tooling for hermetic sealing applications requiring 100% vacuum impregnation processes, • Engineer solutions for molding around delicate magnetic cores, windings, and electronic assemblies, • Create precision tooling for surface mount and through-hole magnetic component packaging, • Design automated potting and encapsulation systems for extreme environment protectionUltra-Miniature Component Manufacturing, • Fabricate tooling for components with wire gauges as fine as 52 AWG (less than 0.001" diameter), • Develop solutions for molding magnetic shields and EMI suppression components, • Create precision fixtures for high-voltage applications up to 10,000V ratings, • Design tooling for power components ranging from 0.75W to 300W in ultra-compact packages, • Engineer solutions for military-grade reliability requirements (MIL-PRF-27, MIL-STD-202), • Support manufacturing of components for QPL (Qualified Products List) certificationAdvanced Precision Manufacturing, • Execute micro-machining operations for ultra-miniature component tooling with tolerances to ±0.0001", • Operate CNC machining centers for precision cavity work in transformer and inductor molds, • Manage wire EDM processes for intricate details in magnetic component housing tools, • Implement specialized surface finishing for optimal magnetic field performance, • Maintain dimensional accuracy for components requiring 300+ thermal cycle reliability, • Execute precision assembly and testing of complex multi-cavity tooling systemsMilitary & Aerospace Quality Standards, • Ensure all tooling meets stringent military and aerospace manufacturing standards, • Implement quality control processes for components destined for fighter aircraft, spacecraft, and submarine systems, • Support manufacturing processes for components used in guidance systems and space applications, • Maintain traceability and documentation requirements for defense contractor specifications, • Coordinate with quality assurance for first article inspection and ongoing production validation, • Support customer audits and certification processes for aerospace and defense applicationsSpecialized Manufacturing Processes, • Design tooling for vacuum impregnation and potting processes unique to magnetic components, • Develop solutions for handling and molding magnetic materials and ferrite cores, • Create automated systems for precise winding insertion and core placement, • Engineer tooling for specialized lead configurations (gull wing, J-lead, surface mount), • Support manufacturing of components for harsh environments including space, underwater, and high-vibration applicationsQualifications:Technical Skills, • CAD/CAM Systems: Advanced proficiency in SolidWorks, MasterCam, and precision design software, • Micro-Machining: Expert-level skills in ultra-precision CNC programming and operation, • EDM Operations: Extensive experience with wire EDM for micro-scale component features, • Materials Science: Understanding of magnetic materials, ferrites, potting compounds, and high-temperature plastics, • Quality Systems: Knowledge of MIL-STD standards, QPL requirements, and aerospace quality protocols, • Measurement Systems: Proficiency with CMM, optical measurement, and micro-dimensional inspectionEducation, Training & Qualifications, • Required: Technical diploma/certificate, completed apprenticeship, or equivalent hands-on training, • Preferred: Technical degree in Mechanical Engineering, Manufacturing Engineering, or Materials Science, • Minimum 10+ years of progressive experience in precision mold design and toolmaking, • Specialized training in magnetic component manufacturing or aerospace electronics preferred, • Familiarity with defense contractor requirements and security protocols preferred, • Experience with magnetic component design and electromagnetic field considerations, • Competitive salary commensurate with experience ($90,000 - $100,000+ depending on qualifications and clearance level), • Comprehensive health, dental, and vision insurance with premium coverage, • 401(k) retirement plan with generous company matching, • Performance-based bonuses tied to mission-critical program success

Job Description Job Overview of Case Worker The case manager is responsible for the coordination of case management services for children (and their families) that attend the Orchard School. The case manager is primarily responsible for the case management of children who are here through DSS contracts, but will also serve children in the residential program and day program who are not connected with DSS. He or she must demonstrate strong knowledge regarding case management services, must work effectively with families, and work collaboratively with the clinical social workers and other team members. The case manager maintains relationships with outside agencies through phone contact and/or face-to-face meetings and is able to represent Andrus at meetings. Schedule Tuesday Thru Saturday with flexible hours Essential Duties of Case Worker Key duties of this position include, but are not limited to, the following: • Effectively manages overall case management process for the children and families on caseload, • Case management including proper communication with outside agencies, assisting families to be connected with necessary resources and the provision of support to children and families as needed and developed with clinical social workers, • Provision of contract specific services such as supervised visits, scheduling and coordinating service plan reviews, attendance at court hearings, and so on., • Meet with children individually to provide support in the discharge planning process, to include incorporating them in and educating them regarding the planning of discharge., • Develop and maintain relationships regarding a broad knowledge of appropriate community resources and organizations, which can include attendance at county wide meetings, • Become familiar with various counties’ Single Point of Access (SPOA) and be responsible for managing SPOA applications., • Is available for phone consultations with families as well as face to face family sessions, home visits and other non-traditional means to build alliances with families, • Meets requirements of Article 29 in regards to referrals, provision of services, and discharge planning for children and families., • Works effectively with team to ensure excellent service delivery, • Represent Andrus effectively and professionally in range of meetings, including court hearings, Service Plan Reviews, SPOA meetings, Treatment Planning Conferences, and so on., • Maintains knowledge of current developments in DSS or OCFS requirements regarding CONNECTIONS, • Work closely with CONNECTIONS coordinator and Clinical Director to ensure compliance with contractual obligations regarding case services., • Manages all clinical documentation for cases effectively and professionally, • Ensures all clinical documentation is completed in a timely and accurate fashion using agency protocol, • Maintains notes and submits all required documents in a timely fashion, which may include CONNECTIONS and ANASAZI notes, • Maintain tracking of all contractual obligations for DSS children, including Connections documentation, FASPs, Service Plan reports all other required reports, as well as attendance at required appearances including but not limited to permanency hearings and Service Plan reviews, • Understands and models agency and department’s commitments, mission, vision and treatment philosophy, • Participates actively in clinical meetings, demonstrating self awareness, responsibility, initiative and professionalism, • Is flexible and accommodating in unplanned or crisis situations, • Seeks and accepts help and direction freely and when needed, • Actively participates in team discussions and demonstrates follow through on team's goals and plans, • Demonstrates a commitment to ongoing professional development through the study and practice of new skills and knowledge in the field, • Models Sanctuary commitments in all interactions, • Supports overall strategic plan of the organization Key qualifications include: • Bachelors in Social Work or related field – BSW or an equivalent combination of education and experience from which comparable knowledge and ability can be acquired, • Excellent oral and written communication skills., • Strong skills in a variety of software applications., • Strong organizational skills., • Ability to adhere to our organization’s core values, • Valid Driver’s License or ability to acquire one within three months of service, • Ability to access and utilize ADP app on smartphone or other device for access to agency programs, • Generous PTO, 4 weeks of vacation, floating holidays, holidays, personal and sick time, • Health Insurance, • Dental Insurance, • Vision Benefits, • 401(k) Employer Contributions, • Tuition Reimbursement, • Flex Spending Accounts, • Employer Paid STD, LTD and Life Insurance, • Adherence to all policies and procedures., • Punctual and regular attendance as scheduled., • Successful, safe and effective implementation of job tasks. Physical/Travel Requirements of Case Worker Candidates who are successfully hired, must participate in our Therapeutic Crisis Intervention training which concludes with a written and verbal test, and you will be evaluated on conducting a proper physical restraint. Employee must be able to drive in order to do Home Visits, off campus visits and attend Court appearances. • Reach, • Walk, • Climb Stairs Nothing in this job description restricts Andrus’ right to modify the duties/responsibilities of this job at any time, with or without advanced notice. EEO Statement Andrus is an equal opportunity employer.

Job Description BASIC FUNCTIONS Entry level position. Performs basic counterfeit lab testing and visual inspection of various commodities including, but not limited to, electromechanical and electrical devices, electronic components, aircraft parts and hardware. This individual has the responsibility and authority to carry out assigned tasks. SPECIFIC DUTIES • Visual and dimensional inspection of all product, including corresponding documentation received into CTG facility, • Ability to complete a full analysis on all EEE Devices within the Laboratory, • Ability to learn and subsequently operate all test equipment within the Laboratory Department, • Prepare and complete all necessary documentation (records) for reporting acceptance/rejection of items inspected and/or tested., • Identify nonconformity to provide data to Quality Manager., • Ability to communicate, document and report all nonconformity within internal system and direct supervisor., • Ability to conduct work as assigned by senior management., • Ensure daily tasks and priority inspections are completed ensuring all stock sales are completed for the day., • Ability to understand industry traceability and documentation requirement as required for each industry, • Ability to evaluate and differentiate between various commodity types., • Review and implement detailed inspection reports to provide all information regarding product testing and inspection, • Ability to use general inspection gages, Ex. Calipers, Micrometers, etc., • Ability to understand and decipher basic blueprint, data sheet, technical sheet requirements., • Must possess the ability to verify products fit, form and function by utilizing the appropriate gages to identify conformity., • Ensure First Article Inspection requirements are done in accordance with AS9102 and customer requirements., • For source conducted first article inspection, utilized tools, equipment as appropriate to conduct GD&T for inspection reports., • Complete AS9102 or equivalent or customer source designated reports for all First Articles and Source Inspections. STANDARD REQUIREMENTS Comply with all requirements of International Standard ISO9001 and ISO27001, NIST 800-171, CMMC – Cyber Security and Informational Data Security Requirements. Aerospace Management System Standards AS9100, AS9120, IDEA-QMS-9090, ASA-100 and supporting construct standards AS6081, IDEA-STD-1010, AC7402-CAAP, CCAP-101, FAA AC00-56, ANSI/ESD S20.20. All employees shall commit and comply with the requirements of AS5553 for Counterfeit Electrical, Electronic and Electromechanical (EEE) Parts – Avoidance, Detection, Mitigation and Disposition practices. METRICS AND MEASURABLES • Daily throughput (inspections/Lab steps completed), • Quality Issue detections (Incoming NCM ), • Outgoing Quality (customer Escapes), • IDEA Certification and knowledge implementation, • Use of GD&T and FAI knowledge for timely FAIR completion, • Issue communication, • Daily 6S/ESD/FOD policies followed, • Ability to find datasheets/drawings information on CTG Systems, • Diversity of inspections (EC/EM/HA/Hardware/etc), • Achieving CQI certification EDUCATION / EXPERIENCE / COMPENTENCY • High School Diploma or equivalent, • 1 year of manufacturing or quality experience is a plus but not required, • Must be proficient in English, both written and verbal communication skills, • Good arithmetic skills are required, • Mechanical aptitude desired, • Working knowledge of measurement instruments: i.e., calipers, etc., • Basic proficiency of Microsoft Excel and Word, • Must complete IDEA-ICE-3000 Certification within 6 months of hire., • Able to pass internal testing and training to meet internal requirements, • Must demonstrate acceptable vision requirement.

Job Description BASIC FUNCTIONS Lead and direct the Quality Engineering Team, ensuring that products meet design and reliability requirements. This individual has the responsibility and authority to carry out assigned tasks. SPECIFIC DUTIES • Offer technical support as required throughout the organization., • Oversight of the Designated Quality Representative (DQR) program for Sikorsky, Lockheed, GDLS and UTC., • Ensure AS9102 and customer requirements are met for all First Article Inspections conducted at CTG, • Technical blueprint, specification and datasheet interpretation and support for all departments, • Provide support for customer defined contract review on any technical requirements established by the customer., • Product planning for all new product(s) – Sampling plans, Inspection/Test methods, validation/verification points., • Product failure review (Internal and External) and providing solutions for added testing/inspection., • Product failure review (Escapes - RMA) from customer. Communication with Sales Department and Customer on resolutions. Process Return Material Authorizations accordingly., • Product Failure review (Internal – RTV), identify any potential Suspect Counterfeit, Confirmed Counterfeit or Unapproved parts that require disposition. Coordinate with the Quality Compliance Manager per AS5553 on disposition methods., • Supporting the Electronic Review Board (EEE Device review – Blueprint, specification requirements and providing authentication solutions), • Monitoring and Measurement Equipment calibration and preventative maintenance. Creating effective cycles to ensure longevity of equipment., • Coordinate with Quality Compliance Manager to establish new standards (ISO, AS or otherwise) to implement within Quality Management System., • Ensure technical standards (ESD S20.20, ISO17025, AS6171, IDEA-STD-1010, etc.) meet industry requirements and are established within the organization in the form of written, documented processes., • This individual has the authority to disposition product(s) as necessary., • Ensures compliance with company code of conduct and all applicable laws, regulations, rules, and policies., • Perform other duties as necessary STANDARD REQUIREMENTS Comply with all requirements of International Standard ISO9001 and ISO27001, NIST 800-171, CMMC – Cyber Security and Informational Data Security Requirements. Aerospace Management System Standards AS9100, AS9120, IDEA-QMS-9090, ASA-100 and supporting construct standards AS6081, IDEA-STD-1010, AC7402-CAAP, CCAP-101, FAA AC00-56, ANSI/ESD S20.20. All employees shall commit and comply with the requirements of AS5553 for Counterfeit Electrical, Electronic and Electromechanical (EEE) Parts – Avoidance, Detection, Mitigation and Disposition practices. METRICS AND MEASURABLES • OTD for special processes FAI, Test Plans, DARs, • Quality ratings for special processes (RMAs, nonconformances, rework) EDUCATION / EXPERIENCE / COMPETENCY • Excellent verbal and written communication skills., • Excellent interpersonal and customer service skills., • Excellent organizational skills and attention to detail., • Excellent time management skills with a proven ability to meet deadlines., • Strong analytical and problem-solving skills., • Strong supervisory and leadership skills., • Ability to prioritize tasks and to delegate them when appropriate., • Proficient with Microsoft Office Suite or related software., • Bachelor’s degree in related field required., • At least three years of related experience required.

Job Description BASIC FUNCTIONS Quality Engineer will provide support to the Sr. Director of Quality Compliance in maintaining a strong overall Quality Compliance Program including the Quality Management System. The core focus shall be technical reviews implemented and established for each Department. This individual has the responsibility and authority to carry out all assigned tasks. SPECIFIC DUTIES • Ensures customers’ technical requirements are met by reviewing process procedures, test procedures, and supplier / Internal quality manuals to understand the scope and testing requirements, • Ensures products meet the organizations and customers quality and product integrity requirements., • Supports process development or operations team by providing analysis and expertise throughout the inspection & testing process., • Counsel and advise Sales personnel on technical developments or nonconformances (drawings, capabilities, etc.), • Advise Sales and Operations leadership on capability/capacity for certain types of orders, products, etc., • Enforce CTG Quality Planning including product sampling., • Support RFP/RFQ/Contract reviews – quality and technical review, • Conduct routine Material Review Board & Counterfeit Review Board actions and provide resolution/disposition, • Responsible for reviewing and submitting CTG requests for designated Airworthiness Rep 8130’s, • Maintain and retain a working list of qualified ASA-100/FAA AC 00-56 trained Inspectors/Technicians., • Oversight of the DQR (Designated Quality Representative) program for Sikorski, Lockheed, GDLS, and UTC. Utilizing First Article / First Piece development per AS9102, • Conduct sampling reviews of contract to shipped product(s), such audits shall be documented, • Ensuring equipment Preventative Maintenance and Calibration requirements are established and followed., • Develop and implement HAZMAT protocols including handling and disposition, • Identifies root causes of problems in the inspection process; recommends and/or implements corrective measures., • Champions Lean-Six Sigma methodologies within the organization; responsible for organizations’ 5S program and identifies and leads projects focused on reducing waste and increasing quality, • Ensure Return Material Authorization process is reviewed and documented, authorize approval as required per process., • Identify requirements for product(s) reviewed at CTG for potential Reach/RoHS specifics, • Manage and Enforce ESD S20.20 requirements within critical zones., • Review all Return to Vendor items for adequacy prior to material leaving facility, process all requirements within EPDS., • Disposition all discrepant material, determine (based on RMA/RTV) scrap rates, rework rates and return to stock., • Serve as backup to Senior Director of Quality Compliance for conditional quality plan approvals and conditional supply-chain activation approvals., • Collect and Analyze quality information for the development of quality strategies and continuous improvement plans, • Performs other duties as assigned. STANDARD REQUIREMENTS Comply with all requirements of International Standard ISO9001 and ISO27001, NIST 800-171, CMMC – Cyber Security and Informational Data Security Requirements. Aerospace Management System Standards AS9100, AS9120, IDEA-QMS-9090, ASA-100 and supporting construct standards AS6081, IDEA-STD-1010, AC7402-CAAP, CCAP-101, FAA AC00-56, ANSI/ESD S20.20. All employees shall commit and comply with the requirements of AS5553 for Counterfeit Electrical, Electronic and Electromechanical (EEE) Parts – Avoidance, Detection, Mitigation and Disposition practices. METRICS AND MEASURABLES • Audit Findings (Reference QMR outputs), • FAI completion rates (M/Y, Quantity and per customer) Avg. process time/capacity, • Conditional Quality plannings (M/Y – Type, product specific, processing time), • RMA & RTV Data, Including DM Rates (Scrap, Rework, etc.) EDUCATION / EXPERIENCE / COMPENTENCY Bachelor’s degree in industrial engineering or related discipline required. • Certified Quality Engineer or equivalent, • ESD Program Manager preferred, • Approximately 0-4 years of experience, • Excellent interpersonal skills with ability to serve as a liaison with developers, project managers, and customer support., • Strong analytical and problem-solving skills., • Proficient with Microsoft Office Suite or related software, • Excellent organizational skills and attention to detail Preferred • Lean Six-Sigma Training/Certification, • Operational experience within QMS in Aerospace, Medical or other highly regulated industry

Job Description BASIC FUNCTIONS Mid-level position. Performs counterfeit lab testing and visual inspection of various commodities including, but not limited to, electromechanical and electrical devices, electronic components, aircraft parts and hardware. This individual has the responsibility and authority to carry out assigned tasks. SPECIFIC DUTIES • Visual and dimensional inspection of all product, including corresponding documentation received into CTG facility, • Prepare and complete all necessary documentation (records) for reporting acceptance/rejection of items inspected and/or tested., • Ability to complete a full analysis on all EEE Devices within the Laboratory, • Ability to operate all test equipment within the Laboratory Department, • Identify nonconformity to provide data to Quality Manager., • Ability to communicate, document and report all nonconformity within internal system and direct supervisor., • Ability to conduct work as assigned by senior management., • Ensure daily tasks and priority inspections are completed ensuring all stock sales are completed for the day., • Ability to understand industry traceability and documentation requirement as required for each industry, • Ability to evaluate and differentiate between various commodity types., • Review and implement detailed inspection reports to provide all information regarding product testing and inspection, • Compile, review data and complete test reports IAW CTG Standards, • Ability to use general inspection gages, Ex. Calipers, Micrometers, etc., • Ability to understand and decipher basic blueprint, data sheet, technical sheet requirements., • Must possess the ability to verify products fit, form and function by utilizing the appropriate gages to identify conformity., • Ensure First Article Inspection requirements are done in accordance with AS9102 and customer requirements., • For source conducted first article inspection, utilized tools, equipment as appropriate to conduct GD&T for inspection reports., • Complete AS9102 or equivalent or customer source designated reports for all First Articles and Source Inspections., • Comply with all requirements of the AS9120, ISO 9001, ASA-100, and IDEA QMS 9090 Quality Management System and criteria of CCAP-101, AS6081, AC7402 and ANSI/ESD-S20.20 STANDARD REQUIREMENTS Comply with all requirements of International Standard ISO9001 and ISO27001, NIST 800-171, CMMC – Cyber Security and Informational Data Security Requirements. Aerospace Management System Standards AS9100, AS9120, IDEA-QMS-9090, ASA-100 and supporting construct standards AS6081, IDEA-STD-1010, AC7402-CAAP, CCAP-101, FAA AC00-56, ANSI/ESD S20.20. All employees shall commit and comply with the requirements of AS5553 for Counterfeit Electrical, Electronic and Electromechanical (EEE) Parts – Avoidance, Detection, Mitigation and Disposition practices. METRICS AND MEASURABLES • Daily throughput (inspections/Lab steps completed), • Quality Issue detections (Incoming NCM ), • Outgoing Quality (customer Escapes), • IDEA Certification and knowledge implementation, • Use of GD&T and FAI knowledge for timely FAIR completion, • Issue communication, • Daily 6S/ESD/FOD policies followed, • Ability to find datasheets/drawings information on CTG Systems, • Diversity of inspections (EC/EM/HA/Hardware/etc), • Achieving CQI certification EDUCATION / EXPERIENCE / COMPENTENCY • High School Diploma or equivalent with a minimum of 2 years’ experience performing in-process and final inspection preferably in a machining, automotive or aerospace business, • Must be proficient in English, both written and verbal communication skills, • Good arithmetic skills are required, • Mechanical aptitude desired, • Ability to correctly use and interpret basic measuring tools including weight gauge, micrometer, caliper scale (linear), gauge blocks, thread gauges, and comparative standards Basic proficiency of Microsoft Excel and Word, • Independent; can work with limited supervision and direction, • Must complete IDEA-ICE-3000 Certification within 6 months of hire., • Able to pass internal testing and training to meet internal requirements, • ASQ CQI certified or must completed certification within 1 year of accepting position, • Strong Electronics inspection knowledge preferred, • Must demonstrate acceptable vision requirement.

Job Description Event Sales Representative |Brooklyn, Queens & Long Island Driven by our passion for perfection for over 290 years, opportunities exist for Event Sales Representatives to promote, pitch, and sell Zwilling premium culinary products at Costco Warehouse locations. In this role you can be expected to do the following: • ZWILLING product demonstrations focused on driving sales and brand awareness., • Answer customers’ questions and overcoming objections while creating an energetic and fun event., • Consistently achieve sales that meet or exceed monthly and annual sales objectives., • Communicate replenishment needs by completing scheduled product inventories preceding, during and after the event., • Confident, persuasive, dynamic public speaking skills in front of a live audience., • Must be able to lift to 50 lbs. (set-up, break down, and restocking demo booths)., • Ability to stand for extended periods of time., • Must be available to work nights and weekends, and potentially overnight travel, as needed., • Consumer goods and services sales experience., • Roadshow experience to present products., • Experience in direct or pitch style sales ideal., • Culinary experience with a passion for food. · Demo Booth set-up: Thursday evening (8:00pm-10:30pm). · Roadshow: Friday through the following Sunday (10 consecutive days). · Monday-Friday: 10-12 hours per day. · Saturday-Sunday: 8-11 hours per day. · Demo Booth tear-down: Sunday evening (6:00pm – 8:30pm) · Hours may vary based on roadshow location or during holiday seasons. • Option to work one roadshow/month or two roadshows/month (At least 3 ½ days off between roadshows), • All positions commence part-time and may shift to full-time, in certain markets, following both time and sales goals achievement., • Compensation includes:, • Base Hourly pay plus applicable overtime. [The actual hourly rate will equal or exceed the minimum wage applicable to the job location] The hourly wage range for this position will commence at $16.50 to $20.00 plus, overtime., • An aggressive, uncapped sales performance-based commission / bonus structure., • On average, experienced demonstrators can earn $2,300-$2,500 per 10-day assignment, with potential to earn significantly more based on sales performance., • Up to 50% off retail cost on ZWILLING products across all brands., • Employee referral monetary rewards., • 401k plan with company match of first 3% plus additional match, following 12 months of service., • All positions will require local travel for events/shows., • Shows within 50 miles of residence: Reimbursable Mileage (personal vehicle) or reasonable transit costs., • Shows more than 50 miles from residence: We will cover necessary travel costs within reason to include: hotel, airfare, rental car, [when necessary] & up to $50/day meal reimbursement.

The Practice Administrator is responsible for the daily non-clinical operations of the Article 28 clinic, including front-desk management, billing and revenue cycle, scheduling, facilities coordination, and administrative compliance.

About Us Versa Products Co., Inc. (VERSA) is a global engineering and manufacturing company specializing in solenoid, pilot, and manually actuated directional control valves and related components for all industrial applications that require real world reliability. We are an industry leader in the design and manufacture of high-quality valves and controls systems. We are committed to innovation, customer satisfaction, and superior solutions across various industries. VERSA is offering a challenging, growth opportunity to contribute to our future success when joining our Manufacturing Department. As a company, we thrive in a collaborative setting where team dynamics produce the best of solutions. We highly value curious, problem-solving, self-starters, always looking for the solution that will best meet the needs of our customers. We place a very high importance on integrity and a culture built over a 75-year history, are committed to continuous improvements, exemplary customer service and product customization, enabling a 10-year warranty for our customers. We are seeking a highly motivated, self-directed individual with at least 5 years' experience, ideally as CNC Lathe Setup / Operator. Prime responsibilities include setup and operation of five-axis CNC Lathes, and Swiss machines. Must be able to read blueprints and capable of doing first article inspection. You will be required to do multiple setups each day, including adjusting tool lengths and offsets as necessary. When operating you will be required to assemble and preset tooling for subsequent operations during automated cycles to reduce machine downtime. Experience with machining stainless steel, brass, and aluminum is required. Practical knowledge of math, geometry, and trigonometry is required. Five-axis programming experience is a plus and utilizing Esprit Cam software is a plus. Requirements: \n • High School Diploma \n, • Equivalent to complete, accredited, indentured apprenticeship or equivalent to high school plus a 2-year technical school \n, • Use of some advanced shop mathematics, formulas \n, • CNC setup / operating experience, 5 Axis \n, • Experience with GD&T \n, • Experience with Quality related issues and the ability to troubleshoot \n, • Use of adjustable measuring instruments and advanced quality control equipment. \n, • Has knowledge in blueprint reading of complicated drawings, specifications and charts/tables \n, • A minimum of 5 years' experience as a setup / operator in a manufacturing environment \n, • Strong attention to detail \n, • 401(k) \n, • Dental insurance \n, • Health insurance \n, • Tuition reimbursement \n, • Full-time \n, • 8 hour shift \n, • Monday to Friday \n Be a part of VERSA, where your hard work and dedication make a difference every day!