Trabajos cnc en Clifton, New JerseyCrear alertas

As a CNC Milling Machinist, you will program, set up, and operate CNC milling machines to produce precision plastic components. Proven experience as a CNC Milling Machinist.

At a Glance Company: Chem Flowtronics Inc Location: Woodland Park, NJ (on-site) Job Type: Full-Time Pay Range: $51+ per hour (based on experience) Shift: Day Shift | 4x10 schedule Overtime: As needed Experience Level: Senior | 8+ years preferred Work Authorization: Must be authorized to work in the U.S. Work Location: In-person --- Why This Role Exists This role exists to support Chem Flowtronics’ continued production of high-quality, precision components. The CNC Machinist plays a critical role in maintaining quality, efficiency, and consistency across machining operations while supporting a collaborative, professional shop environment. --- The Work You’ll Be Doing In this role, you will: • Set up and operate CNC lathes and mills for precision machining, • Install tooling, fixtures, and workpieces and verify proper setups, • Load, run, and adjust CNC programs at the machine, • Perform drilling, milling, turning, and cutting operations, • Conduct test runs and make adjustments to ensure quality and efficiency, • Monitor machine performance and troubleshoot issues as they arise, • Perform in-process and final inspections to ensure parts meet specifications, • Document measurements, inspections, and production activity, • Collaborate with production, maintenance, and engineering teams --- Machines, Controls & Software You’ll work with equipment and tools including: • Machines: CNC Lathes and CNC Mills, • Controls: CNC machine controls (specific platforms based on cell), • CAM Software: Mastercam (strong plus), • Inspection Tools: Calipers, micrometers, and other precision measuring instruments Materials You’ll Work With • Metals commonly used in precision machining (Specific materials will vary by job and program) --- What We’re Looking For Required: • Proven experience as a CNC Machinist / Setup Operator, • Strong ability to read and interpret blueprints and specifications, • Hands-on experience with CNC machine setup, tooling, and offsets, • Knowledge of CNC programming fundamentals and machine controls, • Experience performing part inspection and quality verification, • Strong attention to detail and problem-solving skills, • Safety-minded, dependable, and able to work independently Preferred (Not Required): • Mastercam experience, • Formal technical training or CNC certification, • Experience troubleshooting complex machining issues --- Why Machinists Like Working Here Machinists choose Chem Flowtronics because of: • Competitive top-of-market pay ($51+/hr+), • Hands-on training with experienced professionals, • Respectful, team-oriented shop culture, • Emphasis on integrity, accountability, and craftsmanship, • Modern CNC equipment and professional standards, • A schedule that supports work-life balance (4x10s) --- Pay, Benefits & Schedule Pay: $51+ per hour (DOE) Bonus: Yearly performance bonus Benefits Include: • Medical benefits package available, • 401(k), • Automatic life insurance ($50,000), • Paid holidays & vacation (first year), • HR support and co-employment services through Insperity, • Flexible scheduling, • Paid time off (PTO) Schedule: • Day Shift, • 4x10 workweek, • Two 15-minute breaks per shift --- Apply Interested machinists can apply directly through hireCNC. Apply now or save this job to come back later.

Mission PTI Tech is a leader in advanced engineered materials, delivering high-precision components to demanding industries including defense, aerospace, medical, and industrial. To support continued growth and operational excellence, we are hiring a Project Engineer II who will play a critical leadership role. The Project Engineer II leads new product development from concept through production handoff, independently managing technical projects across PTI’s injection molding, CNC, and sintering operations. This role partners with design, tooling, manufacturing, and quality teams to deliver products that meet performance, cost, schedule, and production-readiness goals. Using sound technical judgment, disciplined execution, and strong cross-functional collaboration, the Project Engineer II drives reliable, manufacturable solutions. The role also supports manufacturing through root cause analysis, automation integration, and continuous improvement initiatives that strengthen operational performance. Competencies – What This Person Must Be • Technical Expertise: Technically proficient in molding, MIM, CNC machining, and related manufacturing processes., • Organization & Project Management: Organized and self-directed, with strong project management capabilities., • Collaboration & Communication: Collaborative and effective in cross-functional and vendor-facing environments., • Analytical Problem Solving: Analytical and process-oriented, applying structured methods to solve problems., • Customer & Quality Focus: Customer- and quality-focused, ensuring deliverables meet expectations., • Adaptability: Adaptable, able to shift between NPD and production support as required. Technically proficient in molding, MIM, and CNC machining. Key Responsibilities • Manage assigned NPD projects independently from concept through validation and production launch., • Define and maintain project timelines, budgets, and risk assessments., • Lead design and tooling reviews, focusing on manufacturability and production readiness., • Lead or coordinate injection molding tooling design and supplier communication, ensuring manufacturability, cost efficiency, and part quality., • Design and manage CNC fixtures, secondary operation tooling, and sintering setters to ensure dimensional repeatability and efficiency., • Conduct and document debind and sintering studies to optimize performance, yield, and tolerance control., • Define and verify technical requirements for outsourced operations (coatings, heat treat, machining) and validate vendor compliance., • Collaborate with automation and vision system providers, supporting setup, system verification, and adjustments during project release., • Plan, execute, and document validation activities (IQ, OQ, PQ, FAI) in accordance with customer and QMS standards., • Lead injection molding, sampling, validation builds, and capability studies., • Provide support to the manufacturing team in resolving recurring or systemic production issues, or when NPD workload allows., • Mentor Project Engineer I team members and share technical best practices., • Participate in continuous improvement, lesson-learned documentation, and workflow optimization. Key Metrics & KPI’s • 90% or greater of projects delivered on schedule and within budget., • 95% or greater first-pass success for IQ/OQ/PQ and FAI validations., • 98% or greater accuracy in project and validation documentation., • Two percent or less corrective actions or rework post-launch., • 95% or greater functional uptime for automation systems during project release. Required Experience & Qualifications • Bachelor’s degree in Mechanical, Manufacturing, Plastics, or related Engineering field., • 3–5 years of relevant engineering experience (product or manufacturing)., • CAD proficiency (SolidWorks preferred)., • Knowledge of injection molding, CNC machining, tooling, and validation processes., • Familiarity with robotics, automation, or machine vision integration. Preferred Qualifications • Experience with APQP, Stage-Gate, or equivalent project management processes., • Hands-on involvement with automation or vision cell installations., • Working knowledge of SPC, PFMEA, DOE., • ERP or PLM system experience. Physical Requirements • Work in both office and production environments., • Lift up to 25 lbs., • Visual focus for design and inspection activities. Work Environment • Office and manufacturing floor exposure, including molding and automation systems., • Occasional travel for supplier, vendor, or customer meetings.

We are recruiting an experienced CNC Swiss Machinist / CNC Shop Manager for a growing precision machining company. This is a highly hands-on shop-floor leadership position for someone who can combine CNC Swiss machining expertise with day-to-day production leadership. The successful candidate will spend the majority of the day in the shop, working directly with machines and employees—not managing operations from an office. We are particularly interested in an experienced Swiss machinist, lead machinist, shop foreman, manufacturing supervisor, or shop manager who is comfortable setting up and operating equipment, troubleshooting machining issues, and keeping a high-mix production environment moving. CNC programming capability is highly desired. What You’ll Do: • Lead day-to-day machine shop operations while remaining actively involved on the production floor, • Set up and operate CNC Swiss screw machines to support production requirements, • Review drawings, specifications, tolerances, and job requirements before production, • Coordinate daily production schedules, machine assignments, manpower, materials, and job priorities, • Support frequent setups, short production runs, custom work, rush jobs, and changing customer requirements, • Troubleshoot machining, tooling, setup, quality, and production issues, • Program or modify CNC programs when needed, depending on experience, • Work with tooling, speeds and feeds, workholding, and machining processes to improve performance, • Perform and support first-article and in-process inspection using precision measuring equipment, • Ensure finished components meet print, tolerance, and quality requirements, • Monitor machine utilization, setup and cycle times, labor efficiency, scrap, rework, and overall shop productivity, • Identify bottlenecks and adjust production priorities to keep work flowing, • Coordinate preventive maintenance and equipment repairs to minimize downtime, • Train, develop, and provide day-to-day direction to machinists, operators, and other shop employees, • Drive improvements in setup time, cycle time, quality, throughput, and overall manufacturing efficiency Preferred Background: • Strong hands-on experience with CNC Swiss screw machining, • Experience setting up and operating Swiss-style CNC equipment, • Ability to program CNC equipment is highly desired, • Experience with CAM-based and CNC Swiss machining environments, • Strong understanding of CNC machine tools, Swiss machining processes, tooling, workholding, feeds and speeds, and machine setup, • Ability to read and interpret engineering drawings, GD&T, dimensions, tolerances, and manufacturing specifications, • Skilled with micrometers, gauges, and other precision inspection and measuring equipment, • Experience troubleshooting machining problems and refining setups and processes, • Background in a high-mix, low-volume or job-shop manufacturing environment with frequent setups is strongly preferred, • Previous experience as a Lead Machinist, Shop Foreman, Manufacturing Supervisor, Production Manager, or hands-on Shop Manager is beneficial, • Experience scheduling and prioritizing multiple jobs across machines and production resources, • Understanding of estimated versus actual machining hours, production efficiency, scrap, and job costs, • Experience machining small-diameter precision components is valuable, • Plastics machining experience is preferred but not required, • Strong shop-floor leadership and the ability to work directly alongside the production team Compensation & Benefits: • $80,000–$140,000 base salary, based on experience and technical capabilities, • Medical benefits, • 401(k) with employer matching, • Paid time off and company holidays, • Discretionary bonus opportunity, • Full-time, stable employment, • Opportunity for continued professional growth This opportunity is particularly well suited to someone who has developed strong CNC Swiss machining skills and is ready to combine those capabilities with broader responsibility for people, production, quality, scheduling, and overall shop performance. If you are a hands-on machining professional who enjoys solving problems on the shop floor and leading by example, we would welcome the opportunity to speak with you.

SUMMARY We are seeking an experienced CNC Programmer to join a precision manufacturing team supporting Aerospace and Department of Defense programs. This position is responsible for developing accurate, efficient, production-ready CNC programs and working closely with machinists and engineers to resolve production and machining challenges. The ideal candidate will have strong GibbsCAM programming experience and a solid understanding of CNC machining processes, tooling, GD&T, and tight-tolerance manufacturing. RESPONSIBILITIES • Develop CNC programs for 3-, 4-, and/or 5-axis machining operations., • Read and interpret complex engineering drawings and GD&T requirements., • Review 3D models and engineering drawings for manufacturability and potential machining issues., • Troubleshoot CNC programming, tooling, and machining problems., • Work closely with CNC machinists and engineers to resolve production issues., • Determine appropriate speeds, feeds, cutting tools, work-holding, and machining strategies., • Maintain accurate and organized CNC programs and manufacturing files., • Support the production of complex, tight-tolerance precision components. QUALIFICATIONS • 3+ years of GibbsCAM programming experience required., • 3+ years of manufacturing experience., • CNC programming experience within a precision manufacturing environment., • Strong understanding of CNC machining processes and tooling., • Ability to work from 3D CAD models, STEP files, and engineering drawings., • Strong understanding of GD&T and tight machining tolerances., • Experience with speeds, feeds, cutting tools, work-holding, and machining strategies., • Strong problem-solving skills and attention to detail., • Ability to work independently and collaborate effectively with Engineering and Production., • Aerospace or defense manufacturing experience preferred., • Experience programming 3-, 4-, or 5-axis CNC equipment preferred., • SolidWorks experience or experience working directly from SolidWorks models preferred., • Experience machining aluminum, stainless steel, titanium, or other aerospace materials preferred., • Experience with complex, tight-tolerance CNC components preferred.

As Sr. Quality Manager, you will be responsible for leading HYTORC's quality operations and supporting the continued development and effectiveness of the company's Quality Management System (QMS). This role will manage and support key quality functions, including Quality Engineering, Quality Control, Supplier Quality, Calibration, Document Control, Compliance, and related EH&S activities as assigned. The Sr. Quality Manager will help maintain compliance with ISO 9001:2015 and ISO 17025:2017 requirements, support customer, supplier, internal, and third-party audits, and drive practical improvements across manufacturing, distribution, assembly, machining, and final product verification activities. The ideal candidate will bring strong hands-on experience in quality systems for manufacturing and machining operations, from incoming material inspection through in-process controls, final inspection, and product release. Key Responsibilities Quality Systems & Compliance • Manage and continuously improve QMS processes, including internal audits, CAPA, calibration, complaints, inspections, risk management, and document control., • Serve as a key quality contact and support ISO Management Representative responsibilities as assigned., • Support notified body, customer, supplier, and third-party audits related to ISO 9001:2015, ISO 17025:2017, and other applicable requirements., • Maintain accurate compliance documentation and ensure procedures, work instructions, forms, and quality records are properly controlled and current., • Track and trend quality metrics; develop reports and dashboards to communicate performance, risks, and improvement priorities., • Support periodic Management Reviews by preparing QMS performance data, audit results, corrective action status, and quality trend information., • Ensure quality requirements are integrated throughout manufacturing, distribution, assembly, machining, and final product verification processes., • Verify QMS compliance through internal audits and ensure timely follow-up on findings, corrective actions, and effectiveness checks. Operational Quality & Performance • Collaborate cross-functionally with Engineering, Manufacturing, Machining, Assembly, Distribution, and Supply Chain to identify, contain, and resolve quality issues., • Lead root cause analysis and corrective/preventive action efforts to improve product quality, process capability, and customer satisfaction., • Manage quality requirements for incoming inspection, in-process inspection, dimensional inspection, assembly checks, calibration, and final product release., • Support production scale-up, new product introductions, and the implementation of new equipment with appropriate quality controls and validated processes., • Define, monitor, and report departmental KPIs; manage priorities, resources, equipment needs, and day-to-day quality workload., • Drive standardization of inspection methods, acceptance criteria, quality records, and nonconforming material processes., • Partner with internal teams to identify opportunities for continuous improvement and reduce repeat defects, rework, scrap, and supplier-related issues. Supplier Quality & Audit Support • Plan, support, and improve vendor and supplier audit activities to evaluate compliance with internal standards, contractual requirements, and applicable regulations., • Monitor supplier quality performance, incoming inspection trends, supplier corrective actions, and recurring nonconformances., • Work with Procurement and Supply Chain to support supplier qualification, corrective action follow-up, and supplier improvement initiatives., • Ensure supplier quality issues are documented, escalated, and resolved in a timely and effective manner. Team Leadership & Development • Lead, coach, and develop quality team members across assigned QC, QA, Compliance, Calibration, Document Control, and related functions., • Set clear expectations, priorities, and performance goals; promote accountability, follow-through, and timely issue resolution., • Support departmental training, onboarding, compliance awareness, and certification needs in partnership with HR and functional leaders., • Build a practical, results-oriented quality culture focused on prevention, problem-solving, data integrity, and continuous improvement. Safety, Regulatory & Sustainability Support • Support regulatory readiness and ongoing compliance with OSHA, UL, RoHS, REACH, Conflict Minerals, ISO standards, and other applicable requirements., • Support Safety Committee and EH&S activities as assigned and promote safe work practices within quality and operational areas., • Stay current with relevant industry standards and help prepare the organization for changing quality and compliance expectations., • Support sustainability and ESG-related data collection or reporting as it relates to quality, compliance, or operational performance. Issue Management & Communication • Manage escalated quality issues, audits, nonconformances, and product concerns with urgency, clarity, and professionalism., • Communicate quality risks, audit outcomes, corrective action status, and improvement plans to senior leadership and cross-functional stakeholders., • Use data, objective evidence, and sound judgment to support decisions and drive timely resolution of quality concerns., • Maintain discretion and professionalism when handling confidential information, audit findings, supplier performance, and employee-related matters. Required Qualifications • Bachelor's degree in Engineering, Quality Management, Manufacturing, or a related field; equivalent relevant experience may be considered., • 7+ years of quality experience within a manufacturing, machining, industrial, or related environment., • Minimum 3 years of experience leading, supervising, or managing quality personnel or cross-functional quality initiatives., • Hands-on experience with QMS processes, internal audits, CAPA, nonconforming material, inspection, calibration, document control, and management review activities., • Strong working knowledge of ISO 9001:2015; knowledge of ISO 17025:2017 strongly preferred., • Experience supporting customer, supplier, internal, and third-party audits., • Experience with CNC machining, precision assembly, dimensional inspection, and final product testing preferred., • ASQ certification such as CQE, CQA, or CMQ/OE preferred; ISO 9001 Lead Auditor certification preferred., • Working knowledge of OSHA, UL, RoHS, REACH, Conflict Minerals, and related standards preferred., • Strong command of MS Office Suite, ERP systems, document control systems, and quality data analysis tools; Minitab experience preferred., • Travel up to 10-20% (domestic and international) Key Competencies • Hands-on quality leader with strong operational discipline., • Clear, professional verbal and written communication skills., • Strong cross-functional collaboration and influencing skills., • Detail-oriented, process-driven, and accountability-focused., • Sound judgment and calm decision-making under pressure., • Strong problem-solving and root cause analysis capability., • Continuous improvement mindset using formal tools and techniques such as DMAIC, 5 Why, fishbone analysis, and corrective action methodology., • Ability to balance urgency, compliance, documentation discipline, and practical business needs. Cultural Fit & Leadership Expectations • Comfortable in a closely held, relationship-driven organization with direct interaction across leadership and operations., • Hands-on manager who is willing to engage at both the shop-floor and management levels., • Committed to transparency, accountability, process improvement, and long-term organizational success., • Able to build trust, reinforce standards, and support a culture of quality across departments., • Trusted to manage confidential information with discretion and professionalism. Salary Range: $150,000 – $180,000 annually Actual compensation will be determined based on experience, qualifications, and business needs. • This position may be eligible for bonus and a comprehensive benefits package, including medical, dental, vision, 401(k), and paid time off.

Lead Quality Control Inspector MAC Products Inc. · South Kearny, NJ · On-site, 1st shift · Full-time · Union position About Us For more than 50 years, MAC Products has designed and built equipment for transmitting, distributing, and controlling electrical power, mainly for the electric utility and electrified transit industries. Our 4.5-acre South Kearny facility combines CNC and conventional manufacturing with a fully equipped quality assurance lab. The Role We're a low-volume, high-mix shop, so every job can be different. We need a Lead QC Inspector who doesn't stop at finding a defect; they trace it to its root cause and work with manufacturing and engineering to fix it for good. You'll be the go-to person for our inspectors, assigning daily work and helping the team grow. Reports to the Quality Manager. What You'll Do • Inspect machined and fabricated metal parts and assemblies across a wide product range, • Assign and prioritize daily inspection work for the QC team, • Coach inspectors on measurement, blueprint reading, and inspection methods, • Investigate nonconformances to root cause and drive corrective actions with manufacturing and engineering, • Document and close out nonconformances and corrective actions, • Perform visual weld inspection (training provided) Requirements • Minimum High school diploma or GED, • 5+ years of hands-on QC inspection in machining, metal fabrication, or industrial manufacturing, • Low-volume, high-mix experience (job shop, custom fabrication, industrial equipment), • Strong skills with calipers, micrometers, height, bore, and thread gauges, and indicators, • Blueprint reading and working knowledge of GD&T, • Proven root-cause problem solving (5 Whys, fishbone, 8D), • Experience training others or serving as a team's go-to person, • Self-motivated and a clear communicator, • Experience limited to pharmaceutical, laboratory, or high-volume single-product QC generally isn't a match for this role. Nice to Have • Visual weld inspection experience; AWS CWI, • First article inspection or CMM experience, • NCR/CAPA systems and ISO 9001, • Basic electrical checks (continuity, wiring against schematics), • Utility or rail/transit product experience, • Technical school or associate degree in machining, manufacturing, or quality, • ASQ Certified Quality Inspector (CQI) What We Offer • Union wages and benefits, including medical coverage (eligible after six months), • Company-sponsored weld inspection training and AWS CWI certification, • A lead role with real influence in a shop with an established QA lab Location & How to Apply On-site in South Kearny (Hudson County). Traffic is heavy, so we strongly prefer candidates within a reasonable daily commute. Apply with your resume and answer the screening questions. Finalists will complete a brief hands-on measurement exercise during the interview.

Sick of being the only one in the shop who actually knows what's going on? You're the person who gets there before everyone else, walks the floor, and already knows which jobs are going to fight you before the first chip flies. You can read a print and see the finished part in your head before you ever touch the controller. You know G-code because you learned it, not because a CAM post-processor spat it out and you crossed your fingers. And yet — somewhere along the way — that skill stopped being worth much. You're doing programmer-level work for operator-level respect. Priorities change three times before lunch and nobody tells you why. The machines you're supposed to run at their best haven't been maintained the way they should be. And the "team" you're supposed to lead treats their workstations like someone else's problem. If any of that sounds familiar, we should talk. Here's the job we actually need done. MAC Products is looking for a CNC Programmer who can own the floor from 6:30 AM on — not just push buttons, but run the morning like it's yours. That means: • Reviewing the day's job queue and knowing what's coming before it's a problem, • Prepping fixtures and tooling so machines are ready to run, not waiting on you, • Programming G-code and working in Fusion 360 or MasterCAM to get parts right the first time, • Running first article inspection and quality checks throughout the day — calipers, gauges, micrometers, GD&T, all of it — and working directly with QC to keep it that way, • Partnering with the CNC Manager on priorities, and adapting fast when they shift — breaking down and setting up a new job without losing your rhythm, • Assigning work to Operators and holding them accountable for their own stations, the same way you're accountable for yours, • Handling routine machine maintenance and cleaning so the equipment you rely on doesn't let you down, • Constantly looking for the win — less scrap, tighter cycle times, smarter tooling This isn't a "figure it out as you go" role. We need someone who's already done this — who can walk in and be the steadiest, most capable person on the floor by 6:45 AM. What you bring Must-haves: • 5+ years of CNC programming experience in G-code and a CAM software (Fusion 360 or Mastercam), • Comfort with inspection tools — calipers, gauges, micrometers, • Strong fundamentals in tooling, fixturing, blueprint reading, and GD&T, • Real production experience: minimizing scrap, reducing cycle times, improving tooling and process efficiency, • Ability to program and operate both mill and lathe Nice to have: • Multi-axis programming experience, • Leadership experience — mentoring or overseeing Operators But the bigger shift is this: you stop being the person absorbing everyone else's chaos, and you start being the person the shop is actually built around. Priorities come through the CNC Manager, not the grapevine. The Operators you're leading answer to you. And the machines, fixtures, and tooling are yours to keep dialed in — your standards, your floor. If you're ready to stop proving you can do this job somewhere that doesn't notice, and start doing it somewhere that does — apply, and let's have a real conversation about what your first 90 days here would look like. Work Location: In person in Kearny, NJ

Are you a skilled technician with a passion for machinery and problem-solving? Do you thrive in fast-paced environments that require travel and hands-on work with cutting-edge equipment? If so, this is your chance to advance your career as a Field Service Engineer II with a leading company specializing in CNC fabrication machinery. Be part of a team that values technical expertise, customer satisfaction, and continuous learning! Overview As a Field Service Engineer II, you will play a crucial role in installing, troubleshooting, maintaining, and training customers on sophisticated CNC fabrication equipment, including punch presses, fiber lasers, mills, lathes, and turning centers. Your mechanical expertise will help ensure the smooth operation of long-standing machines at client sites across the country. This position offers an exciting mix of technical challenge, travel opportunities and the satisfaction of solving real-world manufacturing issues. If you’re ready to contribute your skills in a dynamic environment and grow your professional portfolio, we want to hear from you! Required Skills • Strong mechanical aptitude with experience in hydraulics, pneumatics, and mechanical troubleshooting, • Proficiency with hand tools and machine tools, • Ability to adjust CNC controls (Fanuc controllers a plus) and perform basic parameter changes, • Knowledge of electrical/electronic systems, including troubleshooting and diagnostics, • Excellent problem-solving skills and a professional approach, • Ability to read and interpret technical manuals, schematics, and regulations, • Effective communication skills for training and customer support Nice to Have Skills • Experience with CNC programming or operation, • Familiarity with machine tool sales or upselling parts and upgrades, • Additional certifications in electronics, hydraulics, or mechanical systems, • Multilingual abilities, especially in languages relevant to international travel Preferred Education and Experience • Associate degree or equivalent in engineering, electronics, or a related field, • 4-8 years of experience in machine tool maintenance, installation, or servicing, or military technical training, • Prior experience with Fanuc CNC systems is a plus Other Requirements • Willingness and ability to travel domestically and internationally up to 85%, including potential trips to Canada and Mexico, • Valid driver’s license with a clean driving record and ability to drive personal vehicle as needed, • Ability to lift up to 50 pounds frequently and up to 75 pounds occasionally, • Ability to work in environments with loud noise, airborne particles, vibration, and varying temperatures, • Possession of or willingness to obtain a passport for potential international assignments Take the next step in your technical career—apply now and bring your expertise to a company that values innovation, dedication, and your growth!

About the Role PTI Tech is seeking a hands-on Supply Chain Manager to lead purchasing, strategic sourcing, supplier management, inventory control, and warehouse/logistics operations. This role owns strategic purchasing and supplier relationships while providing overall oversight of warehouse and logistics execution through the Warehouse Supervisor. The ideal candidate brings strong manufacturing supply-chain experience and understands how purchasing decisions, supplier performance, inventory, and material availability directly impact production and customer delivery. What You'll Do Purchasing & Strategic Sourcing • Own purchasing activities for raw materials, plastics/resins, metal feedstock and powders, components, packaging, production supplies, and outside services., • Obtain competitive quotations and evaluate suppliers based on price, quality, lead time, freight, payment terms, reliability, and total cost., • Negotiate pricing, payment terms, minimum order quantities, lead times, freight terms, and supplier agreements., • Source, qualify, develop, and manage suppliers based on cost, quality, delivery, capacity, responsiveness, and overall performance., • Develop continuity plans and proactively address supplier and supply risks., • Manage secondary and outsourced-process suppliers and coordinate with Quality on certifications, nonconformances, and corrective actions., • Support quoting activities by obtaining current material, component, freight, tooling, and outside-service costs. Inventory, Materials & ERP/MRP • Use ERP/MRP demand, production schedules, usage, lead times, safety requirements, and inventory levels to determine purchasing timing and quantities., • Maintain accurate purchasing and supplier master data to support reliable MRP output., • Oversee inventory-control strategy, including ABC classifications and cycle counting., • Analyze inventory turns, days on hand, slow-moving, excess, and obsolete inventory., • Investigate inventory and material discrepancies and drive corrective actions., • Partner with Production, Planning, and Warehouse teams to ensure materials are available and staged for scheduled jobs. Warehouse, Logistics & Compliance • Directly manage the Warehouse Supervisor and maintain overall accountability for warehouse and logistics operations., • Oversee shipping, receiving, inventory accuracy, material staging, warehouse organization, 5S, and on-time customer shipments., • Oversee freight and carrier relationships, including LTL, FedEx, UPS, and other parcel carriers., • Manage customer and supplier returns/RMAs and ensure accurate ERP transactions., • Ensure domestic and international shipments comply with applicable ITAR, export-control, customs, and other regulated-shipping requirements. Leadership & Continuous Improvement • Partner with Finance, Production, Planning, Engineering/NPD, Quality, Sales, and Warehouse teams to resolve shortages, supplier issues, inventory exposure, pricing changes, and delivery risks., • Lead and develop the Warehouse Supervisor through clear priorities, expectations, coaching, and accountability., • Establish and improve standard work across purchasing, inventory, shipping, receiving, supplier management, and warehouse operations., • Track KPIs and implement improvements related to cost, supplier performance, delivery, inventory accuracy, material availability, freight, and working capital. What We're Looking For Required Qualifications • 5+ years of progressive experience in purchasing, procurement, supply chain, inventory, or materials management within a manufacturing environment., • Demonstrated experience managing suppliers and owning material availability, cost, and inventory performance., • Experience sourcing and negotiating raw materials, components, outside services, supplier agreements, payment terms, freight, lead times, and other commercial conditions., • Strong ERP/MRP experience with the ability to validate demand, inventory, lead times, supplier data, and system recommendations., • Working knowledge of inventory control, ABC classification, cycle counting, warehouse operations, material flow, and supplier performance., • Demonstrated leadership experience with strong analytical, communication, organizational, and problem-solving skills. Preferred Qualifications • Bachelor's degree in Supply Chain, Business, Engineering, Operations, or a related field; equivalent manufacturing experience may be considered., • Experience purchasing plastics/resins, metal feedstock or powders, and outsourced manufacturing services., • Experience in injection molding, MIM, CNC machining, or similar engineered manufacturing environments., • Experience in defense, aerospace, medical, or other regulated manufacturing environments., • Familiarity with ITAR/export controls, customs/export licensing, ISO 9001/AS9100, PPAP, or customer-specific supplier requirements., • Experience with supplier scorecards, RFQ/RFP processes, cost modeling, total-cost analysis, LTL freight negotiation, and parcel-carrier management., • IQMS/DELMIAWorks experience is preferred. What Success Looks Like • Strong supplier on-time delivery and quality performance., • Improved material costs and controlled purchase price variance., • Accurate inventory and completion of required cycle counts., • High on-time customer shipment performance., • Improved inventory turns and reduced excess/obsolete inventory., • Reliable material availability with minimal preventable production interruptions., • Effective freight-cost and carrier-performance management. Work Environment This is an on-site, hands-on manufacturing leadership role. The position requires regular movement between the office, warehouse, shipping/receiving, and manufacturing areas to verify material flow, inventory conditions, and supply-chain execution. The environment includes production-floor conditions, warehouse traffic, forklifts, trucks, noise, and temperature variation. Required PPE must be used in designated areas. Occasional supplier visits or business travel may be required.

Responsibilities Program Haas CNC mills and/or lathes using G-code and CAM software Develop and modify CNC programs based on engineering drawings and 3D models Set up and operate CNC equipment, including tooling, workholding, offsets, and machine setup Read and interpret engineering drawings and GD&

We are recruiting an experienced CNC Swiss Machinist / CNC Shop Manager for a growing precision machining company. \n \n This is a highly hands-on shop-floor leadership position for someone who can combine CNC Swiss machining expertise with day-to-day production leadership. The successful candidate will spend the majority of the day in the shop, working directly with machines and employees—not managing operations from an office. \n \n We are particularly interested in an experienced Swiss machinist, lead machinist, shop foreman, manufacturing supervisor, or shop manager who is comfortable setting up and operating equipment, troubleshooting machining issues, and keeping a high-mix production environment moving. \n \n CNC programming capability is highly desired. \n \n What You’ll Do: \n\n • Lead day-to-day machine shop operations while remaining actively involved on the production floor\n, • Set up and operate CNC Swiss screw machines to support production requirements\n, • Review drawings, specifications, tolerances, and job requirements before production\n, • Coordinate daily production schedules, machine assignments, manpower, materials, and job priorities\n, • Support frequent setups, short production runs, custom work, rush jobs, and changing customer requirements\n, • Troubleshoot machining, tooling, setup, quality, and production issues\n, • Program or modify CNC programs when needed, depending on experience\n, • Work with tooling, speeds and feeds, workholding, and machining processes to improve performance\n, • Perform and support first-article and in-process inspection using precision measuring equipment\n, • Ensure finished components meet print, tolerance, and quality requirements\n, • Monitor machine utilization, setup and cycle times, labor efficiency, scrap, rework, and overall shop productivity\n, • Identify bottlenecks and adjust production priorities to keep work flowing\n, • Coordinate preventive maintenance and equipment repairs to minimize downtime\n, • Train, develop, and provide day-to-day direction to machinists, operators, and other shop employees\n, • Drive improvements in setup time, cycle time, quality, throughput, and overall manufacturing efficiency\n\n \n Preferred Background: \n\n • Strong hands-on experience with CNC Swiss screw machining\n, • Experience setting up and operating Swiss-style CNC equipment\n, • Ability to program CNC equipment is highly desired\n, • Experience with CAM-based and CNC Swiss machining environments\n, • Strong understanding of CNC machine tools, Swiss machining processes, tooling, workholding, feeds and speeds, and machine setup\n, • Ability to read and interpret engineering drawings, GD&T, dimensions, tolerances, and manufacturing specifications\n, • Skilled with micrometers, gauges, and other precision inspection and measuring equipment\n, • Experience troubleshooting machining problems and refining setups and processes\n, • Background in a high-mix, low-volume or job-shop manufacturing environment with frequent setups is strongly preferred\n, • Previous experience as a Lead Machinist, Shop Foreman, Manufacturing Supervisor, Production Manager, or hands-on Shop Manager is beneficial\n, • Experience scheduling and prioritizing multiple jobs across machines and production resources\n, • Understanding of estimated versus actual machining hours, production efficiency, scrap, and job costs\n, • Experience machining small-diameter precision components is valuable\n, • Plastics machining experience is preferred but not required\n, • Strong shop-floor leadership and the ability to work directly alongside the production team\n\n \n Compensation & Benefits: \n\n • $80,000–$140,000 base salary, based on experience and technical capabilities\n, • Medical benefits\n, • 401(k) with employer matching\n, • Paid time off and company holidays\n, • Discretionary bonus opportunity\n, • Full-time, stable employment\n, • Opportunity for continued professional growth\n\n \n This opportunity is particularly well suited to someone who has developed strong CNC Swiss machining skills and is ready to combine those capabilities with broader responsibility for people, production, quality, scheduling, and overall shop performance. \n \n If you are a hands-on machining professional who enjoys solving problems on the shop floor and leading by example, we would welcome the opportunity to speak with you.

Job Description Mechanic – Manufacturing Equipment Location: Newark, NJ Compensation: $100,000–$125,000 Schedule: Night shift preferred; day shift available Day Shift: Monday–Thursday, 7:30 AM–4:30 PM; Friday, 7:30 AM–12:00 PM Night Shift: 5:00 PM–3:00 AM, 4 nights per week Why This Role Exists We are looking for an experienced hands-on Mechanic to keep production equipment running safely and reliably. This role is for someone who is comfortable working directly on machinery, diagnosing problems, making repairs, and preventing equipment failures before they cause unnecessary production downtime. Manufacturing maintenance experience is important. We need someone who understands the urgency of a production environment and can troubleshoot problems effectively when equipment goes down. What You Will Own • Troubleshoot mechanical problems with manufacturing and production equipment, • Perform hands-on repairs and equipment adjustments, • Diagnose equipment failures and determine practical repair solutions, • Complete preventive maintenance and scheduled equipment inspections, • Respond quickly to equipment downtime and production issues, • Identify recurring equipment problems and help eliminate root causes, • Maintain accurate maintenance and repair records, • Work closely with production teams to keep equipment operating safely and efficiently, • Follow all required safety procedures during maintenance and repair work What Success Looks Like • Production equipment is repaired quickly and correctly, • Equipment downtime is reduced, • Preventive maintenance is completed consistently, • Recurring mechanical problems are identified and addressed, • Equipment reliability improves, • Production teams have a dependable maintenance resource when problems occur What You Need • Strong hands-on mechanical maintenance and repair experience, • Experience working with machinery in a manufacturing or production environment, • Strong troubleshooting and diagnostic ability, • Experience with preventive maintenance, • Ability to work independently and solve equipment problems under production pressure, • Strong understanding of safe maintenance practices Experience with electrical troubleshooting, pneumatics, hydraulics, automated equipment, CNC machinery, or CMMS systems is helpful but not required. Email Resume: Joel@maiplacement.com Apply Online: https://jobs.crelate.com/portal/maiplacement/job/bui16ds7sdtxfuzxa5abtdhgic Refer a friend and earn up to $1,000 upon a successful placement.

Job Description Position Summary: We are seeking a motivated and detail-oriented Assembler to join our factory floor team. The ideal candidate will have a background in manufacturing, a basic understanding of CNC operations, and proficiency in using power tools and measuring equipment. As an integral part of our production process, the Assembler will be responsible for assembling equipment with precision and contributing to the overall efficiency and quality of our manufacturing operations. Key Responsibilities: Assemble metal and mechanical components according to diagrams and work instructions. Use power tools, hand tools, and measuring devices (such as measuring tape, calipers, etc.) to complete assembly tasks. Follow standard operating procedures (SOPs) and adhere to safety protocols. Inspect completed assemblies for quality and accuracy. Collaborate with team members and supervisors to meet production schedules and targets. Maintain a clean and organized work area. Assist with basic CNC machine tasks as needed (training can be provided). Report any equipment malfunctions or quality issues to supervisors promptly. Participate in documenting and improving standard operating procedures (SOPs) to support process consistency and efficiency. Qualifications: Prior experience in a manufacturing or assembly environment preferred. Basic knowledge of CNC machinery is a plus but not required. Proficient in the use of power tools and hand tools. Ability to accurately read and use a measuring tape and other measurement tools. Strong attention to detail and commitment to producing high-quality work. Punctual, reliable, and a team player. Ability to stand for extended periods and lift up to [weight limit, e.g., 50 lbs]. What We Offer: Competitive hourly wage. Training and growth opportunities in manufacturing and CNC operations. Supportive team environment. Growing PTO plan You more you learn, the more you earn 401K plan \nCompany Description Hickory Industries, Inc. (Old Hickory Bar-B-Q) is one of the world’s most established manufacturers of commercial rotisseries, churrasco grills, and display warmers for the foodservice and retail sectors. With over 50 models available in both gas and electric options, Hickory equipment serves everyone from neighborhood eateries to national supermarket chains. Founded in 1946, Hickory has built a reputation for quality, innovation, and durability in every product we make. Operating from our 46,000-square-foot facility in North Bergen, New Jersey, we continue to uphold our legacy of American craftsmanship — delivering dependable, high-performance equipment that helps customers cook better, sell more, and serve with confidence. Hickory Industries, Inc. (Old Hickory Bar-B-Q) is one of the world’s most established manufacturers of commercial rotisseries, churrasco grills, and display warmers for the foodservice and retail sectors. With over 50 models available in both gas and electric options, Hickory equipment serves everyone from neighborhood eateries to national supermarket chains.\r\n\r\nFounded in 1946, Hickory has built a reputation for quality, innovation, and durability in every product we make. Operating from our 46,000-square-foot facility in North Bergen, New Jersey, we continue to uphold our legacy of American craftsmanship — delivering dependable, high-performance equipment that helps customers cook better, sell more, and serve with confidence.

Preferred Skills & Experience -Experience operating or programming CNC machining equipment. Mold Maker/Machinist Join a stable, established manufacturer that values craftsmanship, precision, and quality.

Are you fully dedicated to the art of CNC machining and CAD/CAM programming?.At Phillips Commercial, our mission is to provide Legendary Service & Value to our customers, which means often going above and beyond to serve them.As an Application Engineer, you’ll work with manufacturing companies eve

Job Description Providing Engineering and Manufacturing solutions since 1955, Triangle specializes in the precision engineering and manufacturing of highly complex, tight-tolerance machined parts and assemblies. Triangle continues to thrive in more than 107,000 square feet over four state-of-the-art facilities at our Upper Saddle River, NJ campus. As a family-owned company, we foster a workplace that supports customer-driven, growth-oriented values and has a passion for surpassing expectations. We invest in our associates and create a supportive, team-based environment for learning, innovation, and advancement. Triangle is not only a family-run business; it's also a place where our associates feel like family. We believe in the same values and bring the same passion to our work each day to make a difference in people's lives. SUMMARY Responsible for meeting customer requirements of on-time delivery and quality through the effective operation of conventional and/or CNC equipment while adhering to the Quality Management System, all applicable regulations and company standards, and Lean Manufacturing Principles, and performing the following duties. 1st Shift - 7:00 AM - 3:30 PM ESSENTIAL DUTIES AND RESPONSIBILITIES include the following. Other duties may be assigned. Understands job specifications and blueprints, as instructed. Independently operates conventional and CNC machining centers. Tests and inspects products during the manufacturing operation to determine if items meet specifications, complying with established standards and methods for inspection, testing, evaluation, and calibration. Understands and follows all written instructions as per tool sheets, inspection plans, etc., and accurately completes all required documentation at the time of the task, as well as provides required data for established metrics in the area. Examines defective machinery to determine problems and reports the need for machine repairs. Inspects and measures tools and equipment for defects and wear, and corrects damage. Recommends process improvements to TC or management. Completes all required documentation on a timely basis. Understands and complies with company policy, safety guidelines, quality system procedures, and housekeeping standards. QUALIFICATIONS To perform this job successfully, an individual must be able to perform each essential duty satisfactorily. The requirements listed below are representative of the knowledge, skill, and/or ability required. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. Education and/or Experience High school diploma or general education degree (GED) and 1-2 years CNC machinist experience. Mechanical inspection background. Language Skills Ability to read and interpret documents such as safety rules, operating and maintenance instructions, and procedure manuals. Ability to update job-related documentation. Ability to effectively present information one-on-one to other employees of the organization. Mathematical Skills Ability to work with mathematical concepts such as probability and statistical inference, and fundamentals of plane and solid geometry and trigonometry. Ability to apply concepts such as fractions, percentages, ratios, and proportions to practical situations. Reasoning Ability Ability to apply common sense understanding to carry out instructions furnished in written, oral, or diagram form. Ability to deal with problems involving several concrete variables in standardized situations. Triangle does not sponsor for employment visa status. Triangle is proud to be an equal opportunity employer. Qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability, or protected veteran status. Powered by JazzHR kKP3VKT1I9

Company Description\n \n \nSTS Aerospace is a leading aerospace manufacturing and engineering company specializing in fluid conveyance solutions for commercial aviation, defense, and space applications. The company designs and manufactures high-performance rigid tubing, flexible hose assemblies, and custom-engineered fluid transfer systems used in critical aerospace platforms worldwide. With a strong commitment to quality, innovation, and customer service, STS Aerospace delivers reliable solutions that support the safety and performance of mission-critical aerospace systems.\n \n Job Description\n \n \nThe CNC Applications Manager provides technical leadership for CNC programming, machining-process development, tooling applications, workholding, machine prove-outs, and manufacturing optimization. This role develops reliable and efficient machining solutions for complex, tight-tolerance components across multi-axis milling, turning, horizontal machining centers, as well as mill-turn machining centers.\n \n \nThe position works closely with engineering, production, quality, machinists, programmers, suppliers, and equipment vendors to improve safety, quality, delivery, cycle time, tool life, and machine utilization. The role also provides hands-on shop-floor support, trains CNC personnel, standardizes programming practices, and leads continuous-improvement projects.\n \n Responsibilities\n \n \nCNC Programming and Process Development\n \n\n • Develop and optimize CNC programs for 3-, 4-, and 5-axis machining centers, CNC lathes, and mill-turn machines.\n, • Use Mastercam or similar CAD/CAM software to create efficient CNC programs.\n, • Develop machining processes from drawing review through production release.\n, • Review engineering drawings, models, specifications, tolerances, and surface-finish requirements before releasing work to production.\n, • Apply appropriate machining strategies for complex geometries, tight-tolerance components, and difficult-to-machine materials.\n, • Maintain organized CNC program, setup, tooling, and process-documentation libraries to support repeatability and revision control.\n\n \nTooling and Applications Management\n \n\n • Lead the selection and application of cutting tools, toolholders, coatings, inserts, and machining strategies.\n, • Evaluate new tooling technologies and machining methods for improvements in productivity, tool life, surface finish, dimensional control, and process reliability.\n, • Standardize successful tooling applications across applicable machines and product families.\n, • Develop tooling packages, setup sheets, tool lists, and standardized cutting-data recommendations.\n, • Analyze CNC programs and production processes to identify non-value-added motion, inefficient toolpaths, excessive handling, unnecessary tool changes, and avoidable machine delays.\n, • Lead cycle-time reduction projects while protecting dimensional accuracy, surface finish, process capability, and product integrity.\n, • Improve machine utilization through better program structure, setup methods, workholding, tooling, and machining strategies.\n, • Establish baseline conditions and document measurable results from process-improvement projects.\n\n \nCNC Setup, Prove-Out, and Shop-Floor Support\n \n\n • Provide hands-on support during CNC setup, first-run prove-out, first-piece inspection, and production launch.\n, • Troubleshoot CNC programming, tooling, setup, dimensional, surface-finish, and machining-performance problems.\n, • Respond to production issues that could affect safety, quality, delivery, or machine uptime.\n, • Coordinate corrective actions with machinists, programmers, manufacturing engineers, maintenance personnel, and quality representatives.\n, • Modify CNC programs and machining methods when necessary to stabilize production and prevent recurring problems.\n, • Support root-cause analysis for machining-related nonconformances and process failures.\n, • Technical Leadership and Training\n, • Provide technical direction to CNC programmers, setup personnel, machinists, and manufacturing support employees.\n, • Train employees in Mastercam, CNC programming, setup practices, tooling applications, troubleshooting, and process-development methods.\n, • Develop programming standards, templates, checklists, and best practices.\n, • Serve as the primary technical resource for advanced CNC machining applications.\n\n \n Qualifications\n \n \nRequired Qualifications\n \n\n • Extensive hands-on CNC manufacturing experience in programming, setup, prove-out, troubleshooting, and process optimization.\n, • Advanced proficiency with Mastercam or comparable CAD/CAM software. Including deburring\n, • Demonstrated experience with 3-, 4-, and 5-axis CNC machining centers and lathes\n, • Ability to read and interpret engineering drawings, CAD models, tolerances, and machining specifications.\n, • Strong knowledge of cutting tools, holders, coatings, speeds, feeds, and machining parameters.\n, • Experience machining complex, precision, or tight-tolerance components.\n, • Ability to work independently and manage multiple technical priorities.\n\n \n Additional Information\n \n \nAll your information will be kept confidential according to EEO guidelines.\n \n \nWe believe that different perspectives and backgrounds are what make a company flourish. All qualified applicants will receive equal consideration for employment regardless of color, religion, sex, sexual orientation, gender identity, national origin, economic status, disability, age, or any other legally protected characteristics. We are proud to be an inclusive company with values grounded in equality and ethics, where we celebrate, support, and embrace diversity.\n \n \nAt no time during the hiring process will Smiths Group, nor any of our recruitment partners ever request payment to enable participation - including, but not limited to, interviews or testing. Avoid fraudulent requests by applying jobs directly through our career's website (Careers - Smiths Group plc)

Job Description Providing Engineering and Manufacturing solutions since 1955, Triangle specializes in the precision engineering and manufacturing of highly complex, tight-tolerance machined parts and assemblies. Triangle continues to thrive in more than 107,000 square feet over four state-of-the-art facilities at our Upper Saddle River, NJ campus. As a family-owned company, we foster a workplace that supports customer-driven, growth-oriented values and has a passion for surpassing expectations. We invest in our associates and create a supportive, team-based environment for learning, innovation, and advancement. Triangle is not only a family-run business; it's also a place where our associates feel like family. We believe in the same values and bring the same passion to our work each day to make a difference in people's lives. SUMMARY Responsible for meeting customer requirements of on-time delivery and quality through the effective operation of conventional and/or CNC equipment while adhering to the Quality Management System, all applicable regulations and company standards, and Lean Manufacturing Principles, and performing the following duties. 1st Shift - 7:00 AM - 3:30 PM ESSENTIAL DUTIES AND RESPONSIBILITIES include the following. Other duties may be assigned. Understands job specifications and blueprints, as instructed. Independently operates conventional and CNC machining centers. Tests and inspects products during the manufacturing operation to determine if items meet specifications, complying with established standards and methods for inspection, testing, evaluation, and calibration. Understands and follows all written instructions as per tool sheets, inspection plans, etc., and accurately completes all required documentation at the time of the task, as well as provides required data for established metrics in the area. Examines defective machinery to determine problems and reports the need for machine repairs. Inspects and measures tools and equipment for defects and wear, and corrects damage. Recommends process improvements to TC or management. Completes all required documentation on a timely basis. Understands and complies with company policy, safety guidelines, quality system procedures, and housekeeping standards. QUALIFICATIONS To perform this job successfully, an individual must be able to perform each essential duty satisfactorily. The requirements listed below are representative of the knowledge, skill, and/or ability required. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. Education and/or Experience High school diploma or general education degree (GED) and 1-2 years CNC machinist experience. Mechanical inspection background. Language Skills Ability to read and interpret documents such as safety rules, operating and maintenance instructions, and procedure manuals. Ability to update job-related documentation. Ability to effectively present information one-on-one to other employees of the organization. Mathematical Skills Ability to work with mathematical concepts such as probability and statistical inference, and fundamentals of plane and solid geometry and trigonometry. Ability to apply concepts such as fractions, percentages, ratios, and proportions to practical situations. Reasoning Ability Ability to apply common sense understanding to carry out instructions furnished in written, oral, or diagram form. Ability to deal with problems involving several concrete variables in standardized situations. Triangle does not sponsor for employment visa status. Triangle is proud to be an equal opportunity employer. Qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability, or protected veteran status. Powered by JazzHR 9X1us5rOOK

Job Description Job Title: Press Brake Operator (3rd Shift) Location: Kearny, New Jersey Compensation: $49,920.00 to $56,160.00 Hours: 11pm-7:30am Responsibilities • Operate and program CNC Press Brake machines, primarily Amada, setting up machinery, and performing test runs on materials., • Use CAD programs, basic hand tools, measurement instruments, and fine measuring tools to ensure accurate production., • Inspect production parts for defects and ensure they meet quality standards., • Perform routine maintenance on machinery to maintain optimal operation., • Communicate with production leads to meet deadlines and follow production schedules., • Maintain a clean and safe work environment, adhering to safety, operational, and regulatory standards in collaboration with Quality and Environmental Departments. Requirements • High school diploma or equivalent required; post-high school education or training preferred., • At least one (1) year of manufacturing experience pressing, bending, or stamping metal., • Familiar with Press Brake programming and setup., • Ability to read and interpret 2D prints, 3D models, and work instructions., • Experience in sheet metal fabrication is required., • Willingness to work in a fast-paced manufacturing environment. System One, and its subsidiaries including Joulé and Mountain Ltd., are leaders in delivering outsourced services and workforce solutions across North America. We help clients get work done more efficiently and economically, without compromising quality. System One not only serves as a valued partner for our clients, but we offer eligible employees health and welfare benefits coverage options including medical, dental, vision, spending accounts, life insurance, voluntary plans, as well as participation in a 401(k) plan. System One is an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex (including pregnancy, childbirth, or related medical conditions), sexual orientation, gender identity, age, national origin, disability, family care or medical leave status, genetic information, veteran status, marital status, or any other characteristic protected by applicable federal, state, or local law. Ref: #562-Joule Staffing - Edison

Job Summary:\n \n \nOperate CNC Swiss lathe machines to fabricate production parts.\n \n Essential Job Functions\n \n \n\n • Operate CNC Swiss lathe machines.\n, • Trouble shoot and diagnose machine performance and ensure produced parts meet specification.\n, • Make appropriate offsets and adjust tools.\n, • Read and interpret blueprints.\n, • Properly use calipers, verniers, and thread gauges.\n, • Properly and safely load and unload machines.\n, • Perform daily and regular cleaning and light maintenance tasks on machines.\n, • Perform all tasks in a safe and responsible manner.\n, • Utilize and abide by all safety procedures.\n, • Comply with all quality policies, specifications, regulations and instructions.\n\n \n Requirements:\n \n \n\n • High school diploma or GED required. Tech school training preferred.\n, • Hands on operating experience in CNC Swiss lathe machining, Tsugami, Star, or Citizen machines\n, • Experience holding tight tolerances.\n, • Set up CNC experience strongly preferred\n, • Effectively communicate and understand job instructions both verbal and written\n, • Problem-solving skills\n, • Attention to detail with precision equipment and products\n, • Ability to perform basic mathematical computations\n, • Ability to work in a fast-paced manufacturing environment\n\n \n Physical Requirements\n \n \n\n • Required to stand, walk, or bend for extended periods of time.\n, • Must be capable of lifting, pulling, pushing, or carrying up to 30 lbs.\n\n \n EEOC Statement: \n \n \nMW Components provides equal employment opportunities to all employees and applicants for employment and prohibits discrimination and harassment of any type without regard to race, color, religion, age, sex, national origin, disability status, genetics, protected veteran status, sexual orientation, gender identity or expression, or any other characteristic protected by federal, state or local laws.\n \n \nEqual Opportunity Employer\n \n \nThis employer is required to notify all applicants of their rights pursuant to federal employment laws.\n \nFor further information, please review the Know Your Rights notice from the Department of Labor.

Job Description Job Title: Press Brake Operator (2nd Shift) Location: Kearny, New Jersey Compensation: $49,920.00 to $56,160.00 Contractor Work Model: Onsite Hours: 40.0 hours per week Responsibilities • Operate and program CNC Press Brake machines, primarily Amada, setting up machinery, and performing test runs on materials., • Use CAD programs, basic hand tools, measurement instruments, and fine measuring tools to ensure accurate production., • Inspect production parts for defects and ensure they meet quality standards., • Perform routine maintenance on machinery to maintain optimal operation., • Communicate with production leads to meet deadlines and follow production schedules., • Maintain a clean and safe work environment, adhering to safety, operational, and regulatory standards in collaboration with Quality and Environmental Departments. Requirements • High school diploma or equivalent required; post-high school education or training preferred., • At least one (1) year of manufacturing experience pressing, bending, or stamping metal., • Familiar with Press Brake programming and setup., • Ability to read and interpret 2D prints, 3D models, and work instructions., • Experience in sheet metal fabrication is required., • Willingness to work in a fast-paced manufacturing environment. System One, and its subsidiaries including Joulé and Mountain Ltd., are leaders in delivering outsourced services and workforce solutions across North America. We help clients get work done more efficiently and economically, without compromising quality. System One not only serves as a valued partner for our clients, but we offer eligible employees health and welfare benefits coverage options including medical, dental, vision, spending accounts, life insurance, voluntary plans, as well as participation in a 401(k) plan. System One is an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex (including pregnancy, childbirth, or related medical conditions), sexual orientation, gender identity, age, national origin, disability, family care or medical leave status, genetic information, veteran status, marital status, or any other characteristic protected by applicable federal, state, or local law. Ref: #562-Joule Staffing - Edison

If you're looking for a special place to build or grow your career, you've found it. Whether you're an experienced professional, a recent college graduate or somewhere in between, IDEX is a place where you can apply your existing skills and learn new ones in an environment where you can make an impact.\n \n \nWith interesting opportunities in engineering, marketing, sales, supply chain, operations, HR, finance, and more across more than 40 diverse businesses around the globe, chances are, we have something special for you.\n \n SUMMARY\n \n \nThe CNC Operator I is an entry level position responsible for overseeing the basic CNC operation and inspection of machined parts. Duties include operating CNC lathes and milling machines, preparing and loading of parts and daily inspection and maintenance to ensure all quality requirements are met. \n \n ESSENTIAL DUTIES AND RESPONSIBILITIES\n \n \nTo perform this job successfully, an individual must be able to perform each essential duty satisfactorily. The requirements listed below are representative of the knowledge, skills and or abilities required. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions.\n \n\n • Ensure parts are machined to meet production goals, including cycle time, quantity and quality.\n, • Operate CNC lathes and milling machines.\n, • Prepare and loads raw materials and parts onto CNC machines. Handle materials appropriately and safely.\n, • Read and interpret basic blueprints and drawings.\n, • Perform in-process inspection of machine parts to ensure manufacturing adherence to all quality regulations. Measure and check dimensions and tolerances using measuring devices, including (but not limited to) calipers, micrometers and gauges.\n, • Perform daily maintenance on CNC machinery. Conduct routine inspection and replace worn-out tooling as needed.\n, • Maintain a clean and safe workplace. Perform daily 6S activities to ensure organization and cleanliness of work area.\n, • Perform necessary transactions in ERP system to maintain accurate inventory.\n, • Other duties as assigned.\n\n \n EDUCATION and/or EXPERIENCE \n \n\n • High school diploma or GED or related experience and/or training: or equivalent combination of education and experience\n, • Basic understanding of CNC G-codes and M-codes\n, • Basic skill in operating CNC machinery and tooling as well as precision measurement tools\n, • Proficiency in basic math skills (addition, subtraction, multiplication, division, fractions, decimals\n, • Haas Controller Experience preferred\n, • Quality assurance experience preferred\n\n \n QUALIFICATIONS\n \n\n • Ability to thrive in a fast-paced, team-focused environment\n, • Must be 18 years of age or older\n, • Must be authorized to work in the US\n\n \n PHYSICAL DEMANDS: The physical demands described here are represented of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. \n \n\n • Ability to lift up to 50 pounds\n, • Specific vision abilities required by the job include close vision, distance vision, peripheral vision, depth perception, and the ability to adjust focus\n, • While performing duties of the job, employee is required to sit; stand; walk; use hands to handle objects, tools, or controls; reach with hands and arms; talk and hear\n\n \n WORK ENVIRONMENT: The work environment characteristics described here are representative of those an employee encounters while performing the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions.\n \n\n • Shop floor working environment\n, • Required to wear safety glasses and shoes, and utilize other safety equipment as required while present on the production floor\n\n \n \nAre you ready to join a different kind of company where our people, our culture, and our commitments are centered around providing trusted solutions that improve lives around the world?\n \n Total Rewards\n \nThe compensation range for this position is $46,700.00 - $70,100.00, depending on experience. This position may be eligible for performance based bonus plan.\n \n Benefits Package\n \n \nOur comprehensive U.S. benefit offerings include: Health benefits, 401(k) retirement savings program with company match, PTO, and more. More information on our benefits and rewards can be found on our career page: https://www.idexcorp.com/careers/our-benefits-and-rewards/\n \n IDEX is an Equal Opportunity Employer. IDEX gives consideration for employment to qualified applicants without regard to race, color, religion, creed, genetic information, sex, sexual orientation, gender identity or expression, marital status, age, national origin, disability, protected veteran status, or any other consideration or protected category made unlawful by federal, state or local laws.\n \n Attention Applicants: If you are an individual with a disability and require a reasonable accommodation to complete any part of the application process, please let us know. Likewise, if you are limited in the ability to access or use this online application process and need an alternative method for applying, we will determine an alternate way for you to apply. Please contact our Talent Acquisition Team at [email protected] for assistance with an accommodation. These contact tools may be used only by individuals with a disability for accommodation requests. Do not inquire as to the status of an application.\n \n \nThis posting is for an existing vacancy.\n \n \nArtificial intelligence is not used to screen, assess or select applicants.

Job Description Fabrication Operator Fairfield, NJ Full Time Entry Level Fabrication Operator in Fairfield, NJ 1st Shift Pay $17.50 per hour – $19.75 Based on experience Fulltime, Benefits, and Weekly Pay iBoost Talent is hiring for a Full-Time Fabrication Operator with Turret Punch Press experience in Fairfield, NJ. Impact is proud to offer an industry leading benefits and wellness package, with eligibility for some programs beginning Day 1! Our positions are full-time, year-round employment with paid training. We offer: • 5 Days of PTO, • 6 Paid Holidays, • Paid Sick Leave, • Up to 50% of health insurance premiums paid, • Access to a retirement plan, financial fitness, and employee savings programPay $17.50 – $19.75 per hour based on experience 1st Shift Hours - 6:00am – 2:30pm Mon – Fri Job Summary: This position is responsible for safely setting up, operating, and shutting down various CNC fabricating, forming & VMC Machines. This position will have the responsibility to ensure the machine parts and production units are meeting or exceeding the required quality standards. Work assignments will be scheduled based on training proficiency. Duties and Responsibilities: • Set up and inspect the first piece against engineering drawings, ensuring accurate information transfer for efficient production runs., • Conduct routine quality control checks during setup and production, addressing any issues promptly., • Collaborate with the Supervisor and Team Leader to prioritize tasks according to the job board., • Organize, sharpen, and maintain tools and dies as needed., • Train operators based on Supervisor's instructions and plan for upcoming jobs by preparing materials and paperwork in advance., • Perform routine setup, troubleshooting, and machine maintenance, including cleaning and checking tools., • Communicate with management regarding any issues and the priority of upcoming setups., • Conduct basic quality checks and make necessary adjustments to ensure parts meet specifications., • Load and unload machines, verifying correct part processing., • Perform lower-level tasks such as filing and sanding as required., • Adhere to safety rules and maintain good housekeeping practices., • Report hazardous situations and participate in safety programs., • Lead or participate in Continuous Improvement Teams and maintain a clean workstation according to 5S procedures., • Support overall departmental and corporate goals by performing additional duties as assigned.Job Requirements:, • Basic math, communication, and troubleshooting skills., • Proficiency in using measurement tools (e.g., tape measure, calipers) and interpreting engineering drawings and BOMs., • Ability to follow directions and work independently with minimal supervision., • Flexibility to adapt to changing priorities and tasks., • Mechanical aptitude and problem-solving skills., • Experience in setting up and operating CNC equipment., • Team-oriented with the capability to train others in CNC techniques., • Reliability in attendance and punctuality., • Understanding of basic lean principles (5S, Kanban)., • Proficiency in English is preferred.Education and Experience:, • High school diploma, GED, or technical certification preferred., • Minimum of 4 years of experience operating specialized equipment or 3 years of CNC setup experience.Working Conditions/Physical Demands:, • Stand for 8 hours a day, performing coordinated hand movements and frequently lifting up to 50 lbs., with occasional lifting up to 100 lbs., • Tasks may involve repetitive motions, overhead reaching, bending, and exposure to sharp edges, dust, and high noise levels., • Work in a non-temperature-controlled environment; steel-toed shoes are required.

Join a hands-on precision machining environment where you will set up, program, and operate CNC equipment while supporting mechanical assembly work.This role offers variety across metal, insulation board, and plastic components, with the opportunity to work independently and contribute directly to h

Machine Shop / Facilities Manager Location: Englewood, NJ Reports to: President Department: Production Direct Reports: Planner, Machinists, Assembler, Welder Indirect Reports: Purchasing Representative, Production Control Supervisor, Warehouse/Shipping & Receiving Supervisor, Assembly & Test Engineer About the Company Flowtec Group has partnered with a well-established rotating equipment and spare parts manufacturer on their search for a Machine Shop / Facilities Manager. Our client operates a multi-million-dollar precision manufacturing facility serving demanding industrial markets. Position Summary The Machine Shop / Facilities Manager is responsible for managing and continuously improving all operational aspects of the manufacturing facility. This is a hands-on, high-energy leadership role reporting directly to the President. Key Responsibilities • Ensure a safe, OSHA, and environmentally compliant workplace, • Manage facilities operations and lead modernization initiatives, • Supervise machinist, assembly, and welding personnel, • Coach direct and indirect employees to maximize morale, engagement, and productivity, • Utilize visual metrics to provide constant feedback on performance vs. plan and continuous improvement goals, • Own capacity, expense, inventory, and capital investment budgeting and forecasting, • Lead machine shop and test area capacity planning, • Manage all aspects of the supply chain, including supplier selection and contract negotiation, • Oversee critical shop activities including production planning, preventative maintenance, and continuous improvement, • Utilize EPICOR Release 10 ERP system to schedule and track production transactions, • Interface with customer representatives and third-party quality assurance organizations during shop inspections and customer witness testing, • Participate in the Quality Review Board, • Drive 5S and lean implementation, • Reduce slow-moving inventory and manufacturing costs, • Provide cost estimates for sales and engineering in support of proposal and product development activities Required Qualifications • Minimum 10 years of machine shop supervisory experience, preferably in a high-precision manufacturing environment, • Engineering degree or equivalent work experience, • Strong CAD/CAM, CNC, and manual machine tool knowledge and experience, • Basic knowledge of ASME welding and pressure vessel code requirements, • Ability to read engineering drawings and specifications, • Experience working within ISO or Military Standard Quality assurance systems, • Working knowledge of Microsoft Office, • Root cause analysis, problem solving, and corrective action implementation, • Basic understanding of casting techniques and casting quality control, • Continuous improvement mindset and drive, • Leadership and coaching skills, • Desire and aptitude to grow into more senior positions within the company

We specialize in the design and manufacture of Solenoid Valves and control components for liquids and gases in critical application in the aerospace, nuclear, light industrial and scientific industries. We specialize in the design and manufacture of Solenoid Valves and control components for liquids

Must be able to skillfully use all machinist’s hand tools and measuring instruments. Requires the completion of an apprenticeship program or similar on the job experience of approximately four years or at least five years experience as a machinist. Determines proper tooling and sequence of ope

Join a hands-on precision machining environment where you will set up, program, and operate CNC equipment while supporting mechanical assembly work.This role offers variety across metal, insulation board, and plastic components, with the opportunity to work independently and contribute directly to h

Experience with 3 and 5 axis CNC mills.

Job DescriptionJob is in New Jersey. Recruiters and out of the country candidates, please don't contact this job poster. Compensation based on Experienced and skills Essential job functions include: • Completing multiple setups, including adjustments to tool lengths and offsets as necessary Reading blueprints, • Years of experience as a HAAS CNC lathe/mill setup or operator preferred, • Performing first article inspections, • Capability to learn additional machine types such as Kiwa, • High school diploma or equivalent Required Experience, • Experience machining aluminum and stainless steel, • Mastercam programming knowledge preferred., • Practical knowledge of math and geometry, • Computer skills Dependability Great attitudeWear a mask. Job Type: Full-time

Job Description INJECTION MOLDING TECHNICIAN We are seeking an experienced Injection Molding Technician with a strong background in plastic injection molds, machining, mold repair, and modification. This is an excellent opportunity with an established company offering excellent benefits, long-term stability, and an opportunity for a career through retirement. Key Responsibilities & Qualifications ☐ Hands-on experience with plastic injection molding machines ☐ Experience repairing, adjusting, modifying, and designing injection molds ☐ Strong background in injection mold making and maintenance ☐ Ability to troubleshoot and repair plastic injection molds ☐ General machine shop experience, including milling and related machining equipment ☐ CNC machining experience strongly preferred ☐ Manual machining experience desired ☐ Ability to read and understand blueprints, engineering drawings, schematics, and specifications ☐ Strong mechanical troubleshooting and problem-solving skills ☐ Ability to work independently and maintain high-quality standards ☐ Tool & Diemaker welcomed Ideal Candidate The ideal candidate will have a strong general machining background, including milling and CNC machining, combined with hands-on experience working with plastic injection molds. We are particularly interested in candidates who have experience designing, repairing, modifying, maintaining, and troubleshooting injection molds and who can bring a strong machine-shop skill set to the position. Long-Term Opportunity This is an established company with excellent benefits and a strong commitment to its employees. We are looking for someone who wants more than just another job—someone interested in long-term employment and the opportunity to build a career with a company through retirement. If you have the injection molding, mold-making, repair, and machining expertise we are looking for, please submit your resume through this platform. We will review your qualifications and contact you regarding the opportunity. \nCompany Description · Stable company with long-term career opportunities · Competitive compensation · Overtime opportunities (when available) · Excellent work environment · Benefits package (where applicable) · Stable company with long-term career opportunities\r\n· Competitive compensation\r\n· Overtime opportunities (when available)\r\n· Excellent work environment\r\n· Benefits package (where applicable)

Job Description UTRS Advanced Manufacturing (UTRS AM) is currently seeking a 2nd Shift Lathe Operator to join our team! At UTRS AM, we enjoy the benefits of working in a collaborative environment of close-knit team members. As a company, we provide a wide range of leading-edge engineering, management, and digital services to the public and private sectors. We are looking for someone that will support our mission to consistently deliver creative, high-quality, technology-based services to our customers on time and within budget. This position is responsible for keeping the lathe machines up and running during our 2nd shift. This position is located at 19 Just Rd in Fairfield, NJ 07004. What will you be doing? This position will be a key member of the Lathe Department. Duties include: • Operating CNC lathes (Doosan Lynx 220, LSYC, Haas TL1)., • Perform in-process quality inspection, • Basic shop responsibilities – cleaning machine at end of shift, organizing workstation. What skills will the ideal candidate have to be successful? This position will require the following skillsets and experience: • 1 - 3 years’ experience in CNC machining, • Blueprint reading, GD&T, • Basic bench-top inspection, • Must be US Citizen Read about our benefits here: Our Benefits - UTRS | Always, Got Your Back UTRS is an Equal Opportunity employer. All qualified applicants will receive consideration for employment without regard to sex, gender identity, sexual orientation, race, color, religion, national origin, disability, protected Veteran status, age, or any other characteristic protected by law. UTRS is a drug-free workplace with pre-employment drug testing and background verifications. For more information or to apply now, go to the website below: https://www.eeoc.gov/sites/default/files/2022-10/EEOCKnowYourRightsscreenreader10_20.pdf https://www.dol.gov/agencies/ofccp/vevraa/self-id-form

Job Description Index Corporation - A leading machine tool builder INDEX TRAUB - CNC turning machines, automatic lathes & turn-mill centers - INDEX TRAUB SUMMARY: This position is responsible for providing effective customer support by • Developing robust production processes, • Meeting cycle time expectations, • Providing on time machine deliveries, • Providing customer training ESSENTIAL DUTIES AND RESPONSIBILITIES include the following. Other duties may be assigned. • Reviews and understands customer part prints, Company time studies and machine quotations., • Assists in the development of tooling, work-holding and documentation for project purchases., • Develops documentation related to tooling, work-holding, etc. for project purchases., • Writes CNC programs for products, installs and adapts all necessary components for a proper machine set-up, and debugs all facets of the process and project., • Prepares machines and related items by breaking down set-up, inventorying packages, verifying that all items have been accounted for, repacking items, and preparing packing list and shipping information., • Maintains a clean and safe area around machines, disposes of used coolant and chips, returns unused items to the shipping and receiving area using the project carts or bar stock areas., • Performing the set-up of sold machines and follows through to final machine acceptance and customer training at the customer's site or at INDEX., • Supports other Company departments with technical information, including, but not limited to: processing; tooling; and work-holding., • Provides timely response for programming and technical assistance for customers and Company employees via telephone, email and/or site visits, if required. EDUCATION AND/OR EXPERIENCE: 7-10 years of machine set up and programming experience. High School diploma or equivalent, or equal combination of education and experience is required. Previous experience in a manufacturing environment where engineering and project management skills were essential to the overall operations of the organization is required. PHYSICAL DEMANDS: The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential duties and responsibilities. While performing the duties of this job, the employee is regularly required to sit; use hands to finger, handle, or feel; reach with hands and arms; and talk or hear. The employee frequently will stand; and walk. The employee occasionally will climb or balance; stoop, kneel, crouch or crawl; taste or smell; and lift and/or move up to 50 pounds. Specific vision abilities required by this job include close vision (clear vision at 20 inches or less), distance vision (clear vision at 20 feet or more), color vision (ability to identify and distinguish colors), peripheral vision (ability to observe an area that can be seen up and down or to the left and right while eyes are fixed on a given point), depth perception (three-dimensional vision, ability to judge distances and spatial relationships), and the ability to adjust focus (ability to adjust the eye to bring an object into sharp focus). Excellent pay and benefits along with a "family first" environment. This is a great opportunity. #ZR

Job Description Millwork Engineer / CAD Designer Employment Type: Full-Time Schedule: Monday-Friday, 7:00 AM-4:00 PM Work Location: On-Site Compensation: Competitive, based on experience Position Overview We are seeking a skilled Millwork Engineer / CAD Designer to join our team and support the production of architectural woodworking and millwork projects from design through manufacturing and installation. This position is responsible for taking architectural drawings and developing detailed shop drawings for review and approval by architects, general contractors, construction managers, and customers. Approved drawings are then used by our CNC operators, bench carpenters, and installation crews to bring the project to completion. The ideal candidate will have a strong command of AutoCAD combined with hands-on knowledge of woodworking, cabinetry, carpentry, or architectural millwork. Experience with CNC programming software is highly beneficial, but we are willing to train the right candidate who has the necessary AutoCAD and woodworking foundation. We are looking for someone who can work efficiently, demonstrate a sense of urgency, communicate effectively, and take ownership of their work with minimal supervision. Key Responsibilities • Draft and review detailed AutoCAD shop drawings for architectural woodworking and millwork projects., • Interpret architectural drawings, plans, and specifications and translate them into accurate, production-ready shop drawings., • Coordinate drawings and details to ensure designs are practical for manufacturing, fabrication, and installation., • Prepare CNC machine programs using CAD/CAM software such as WoodWOP, WoodCAD|CAM, and CutRite., • Coordinate with CNC operators, bench carpenters, installers, project managers, and other team members throughout the production process., • Revise drawings based on architect, customer, GC/CM, and internal feedback., • Ensure drawings and CNC programs accurately reflect project requirements and approved designs., • Identify potential fabrication or installation issues before they reach production., • Manage assigned projects and tasks efficiently while maintaining accuracy and attention to detail., • Work independently and complete assignments without requiring constant direct supervision., • Maintain a strong sense of urgency while meeting project deadlines and production schedules.QualificationsRequired, • Strong proficiency in AutoCAD., • Working knowledge of woodworking, cabinetry, carpentry, or architectural millwork., • Ability to read and interpret architectural drawings and construction documents., • Strong attention to detail and ability to produce accurate technical drawings., • Ability to work independently and prioritize multiple tasks., • Strong communication and teamwork skills., • Positive attitude and willingness to learn., • Strong work ethic and a sense of urgency.Preferred, • Experience with WoodCAD|CAM., • Experience with Microvellum / iX., • Experience with WoodWOP or CutRite., • Previous experience programming CNC machinery for woodworking or millwork applications., • Experience producing shop drawings for architectural millwork or custom woodworking projects.Education & Experience A two-year degree is not required for this position. We are primarily interested in what you can do, not simply what is listed on your résumé. Candidates who can demonstrate strong AutoCAD skills, understand woodworking and millwork, and effectively communicate within a manufacturing and construction environment will be considered. We are willing to train the right candidate on CNC programming and our specific CAD/CAM software if they already possess a strong foundation in AutoCAD and woodworking. What We're Looking For The successful candidate will be someone who: • Takes ownership of their work., • Can perform assigned tasks with minimal supervision., • Works efficiently and with a sense of urgency., • Has a strong attention to detail., • Is comfortable working in a fast-paced production environment., • Communicates well with teammates and other project stakeholders., • Has a positive, team-oriented attitude., • Is willing to learn new software and processes., • Understands that accuracy in the engineering and drafting process directly impacts fabrication, CNC production, and field installation.Compensation & Benefits, • Competitive compensation based on experience., • Full health benefits., • Paid Time Off (PTO)., • 401(k)., • Full-time, Monday-Friday schedule., • Opportunity to develop additional expertise in CNC programming, CAD/CAM, and architectural millwork engineering. If you have a strong AutoCAD background and understand woodworking or millwork, we want to hear from you. CNC programming expertise is a plus, but we are willing to train the right person.

Job Description We are Corporate Woodworking and we’ve been manufacturing architectural millwork in New Jersey for over 40 years. As we continue to grow, we are looking for someone to join our team as a Project Draftsman / Engineer. Job Responsibilities include: • Drafting and Review of AutoCAD shop drawings for architectural woodworking projects., • Prepare CNC machine programs using CAD/CAM software (WoodWOP, WoodCAD|CAM, CutRite)., • This is a Full-Time, Monday through Friday Position from 7:00AM – 4:00PM., • Looking for someone highly proficient in AutoCAD, we are able to train on the CNC programming side of the responsibilities., • Experience with woodworking, cabinetry, carpentry, and/or millwork would be preferred., • Experience with WoodCAD|CAM - OR - Microvellum would be beneficial., • Position is not eligible for remote work, • Compensation based on experience, • Candidate MUST Possess a Positive Attitude, a Willingness to Work & is Team Oriented., • Candidate MUST be Able to Perform Tasks Given Without Direct Supervision., • Competitive compensation package including full health benefits, PTO, 401k.\nCompany Description Corporate Woodworking along with her sister company, Andersen Interior Contracting, are divisions of The Andersen Companies and have been the leaders in commercial interior systems and millwork contracting in the Northeast since 1986 with its corporate headquarters located in Fairfield, NJ. We also have a solid and ever growing presence and offices throughout the state of Florida since 2009. We are a successful and reliable organization with an impeccable reputation in the marketplace for our high standards of service and performance with our customers along with our workplace culture and long-tenured employees providing us with the highest levels of integrity and trust for a professional work experience like no other. Corporate Woodworking along with her sister company, Andersen Interior Contracting, are divisions of The Andersen Companies and have been the leaders in commercial interior systems and millwork contracting in the Northeast since 1986 with its corporate headquarters located in Fairfield, NJ. We also have a solid and ever growing presence and offices throughout the state of Florida since 2009. We are a successful and reliable organization with an impeccable reputation in the marketplace for our high standards of service and performance with our customers along with our workplace culture and long-tenured employees providing us with the highest levels of integrity and trust for a professional work experience like no other.

Job DescriptionCompany Description STS Aerospace is a leading aerospace manufacturing and engineering company specializing in fluid conveyance solutions for commercial aviation, defense, and space applications. The company designs and manufactures high-performance rigid tubing, flexible hose assemblies, and custom-engineered fluid transfer systems used in critical aerospace platforms worldwide. With a strong commitment to quality, innovation, and customer service, STS Aerospace delivers reliable solutions that support the safety and performance of mission-critical aerospace systems. Job Description The CNC Applications Manager provides technical leadership for CNC programming, machining-process development, tooling applications, workholding, machine prove-outs, and manufacturing optimization. This role develops reliable and efficient machining solutions for complex, tight-tolerance components across multi-axis milling, turning, horizontal machining centers, as well as mill-turn machining centers. The position works closely with engineering, production, quality, machinists, programmers, suppliers, and equipment vendors to improve safety, quality, delivery, cycle time, tool life, and machine utilization. The role also provides hands-on shop-floor support, trains CNC personnel, standardizes programming practices, and leads continuous-improvement projects. Responsibilities CNC Programming and Process Development • Develop and optimize CNC programs for 3-, 4-, and 5-axis machining centers, CNC lathes, and mill-turn machines., • Use Mastercam or similar CAD/CAM software to create efficient CNC programs., • Develop machining processes from drawing review through production release., • Review engineering drawings, models, specifications, tolerances, and surface-finish requirements before releasing work to production., • Apply appropriate machining strategies for complex geometries, tight-tolerance components, and difficult-to-machine materials., • Maintain organized CNC program, setup, tooling, and process-documentation libraries to support repeatability and revision control. Tooling and Applications Management • Lead the selection and application of cutting tools, toolholders, coatings, inserts, and machining strategies., • Evaluate new tooling technologies and machining methods for improvements in productivity, tool life, surface finish, dimensional control, and process reliability., • Standardize successful tooling applications across applicable machines and product families., • Develop tooling packages, setup sheets, tool lists, and standardized cutting-data recommendations., • Analyze CNC programs and production processes to identify non-value-added motion, inefficient toolpaths, excessive handling, unnecessary tool changes, and avoidable machine delays., • Lead cycle-time reduction projects while protecting dimensional accuracy, surface finish, process capability, and product integrity., • Improve machine utilization through better program structure, setup methods, workholding, tooling, and machining strategies., • Establish baseline conditions and document measurable results from process-improvement projects. CNC Setup, Prove-Out, and Shop-Floor Support • Provide hands-on support during CNC setup, first-run prove-out, first-piece inspection, and production launch., • Troubleshoot CNC programming, tooling, setup, dimensional, surface-finish, and machining-performance problems., • Respond to production issues that could affect safety, quality, delivery, or machine uptime., • Coordinate corrective actions with machinists, programmers, manufacturing engineers, maintenance personnel, and quality representatives., • Modify CNC programs and machining methods when necessary to stabilize production and prevent recurring problems., • Support root-cause analysis for machining-related nonconformances and process failures. Technical Leadership and Training • Provide technical direction to CNC programmers, setup personnel, machinists, and manufacturing support employees., • Train employees in Mastercam, CNC programming, setup practices, tooling applications, troubleshooting, and process-development methods., • Develop programming standards, templates, checklists, and best practices., • Serve as the primary technical resource for advanced CNC machining applications.Qualifications Required Qualifications • Extensive hands-on CNC manufacturing experience in programming, setup, prove-out, troubleshooting, and process optimization., • Advanced proficiency with Mastercam or comparable CAD/CAM software. Including deburring, • Demonstrated experience with 3-, 4-, and 5-axis CNC machining centers and lathes, • Ability to read and interpret engineering drawings, CAD models, tolerances, and machining specifications., • Strong knowledge of cutting tools, holders, coatings, speeds, feeds, and machining parameters., • Experience machining complex, precision, or tight-tolerance components., • Ability to work independently and manage multiple technical priorities. Additional Information All your information will be kept confidential according to EEO guidelines. We believe that different perspectives and backgrounds are what make a company flourish. All qualified applicants will receive equal consideration for employment regardless of color, religion, sex, sexual orientation, gender identity, national origin, economic status, disability, age, or any other legally protected characteristics. We are proud to be an inclusive company with values grounded in equality and ethics, where we celebrate, support, and embrace diversity. At no time during the hiring process will Smiths Group, nor any of our recruitment partners ever request payment to enable participation – including, but not limited to, interviews or testing. Avoid fraudulent requests by applying jobs directly through our career’s website (Careers - Smiths Group plc)

Job Description We are seeking an experienced and detail-oriented Large Format Printing Estimator to join our team. This position is responsible for reviewing customer specifications, drawings, and project requirements to develop accurate and competitive estimates for large-format printing, graphics, signage, displays, and related fabricated products. The ideal candidate understands the entire production process, including printing, substrates, finishing, fabrication, labor, installation, outside services, and material utilization. This individual will work closely with Sales, Customer Service, Purchasing, Prepress, Production, and Management to ensure estimates accurately reflect the scope of work and the most efficient method of production. This role requires someone who is analytical and detail-oriented while also having enough practical production knowledge to identify the best way to manufacture a project. Key Responsibilities • Prepare accurate and timely estimates for large-format printing, signage, graphics, displays, and related projects., • Review customer specifications, drawings, artwork requirements, bid documents, and requests for quotation., • Determine the most efficient production method based on equipment capabilities, materials, quantities, finishing requirements, and project specifications., • Calculate costs for:, • Raw materials and substrates, • Ink and consumables, • Machine and production time, • Prepress and file preparation, • Finishing and converting, • Cutting and routing, • Laminating and mounting, • Sewing and finishing, • Fabrication, • Packaging, • Freight and shipping, • Installation, • Outside services and subcontracted work, • Labor and other project-specific costs, • Develop material layouts and determine appropriate material yields, waste factors, and production efficiencies., • Obtain pricing from vendors and subcontractors when required., • Work with Purchasing to confirm current material and outsourced service costs., • Collaborate with Sales and Customer Service to clarify specifications and recommend cost-effective production alternatives., • Identify missing information, potential production challenges, and cost risks before quotes are finalized., • Assist in determining appropriate production processes for unusual or highly customized projects., • Maintain accurate estimating data, including material costs, machine rates, labor rates, and vendor pricing., • Review completed projects when appropriate to compare estimated costs versus actual production costs., • Assist in improving estimating standards, production assumptions, and costing methodologies., • Support value-engineering initiatives by identifying alternative materials or production methods that reduce costs while maintaining customer requirements., • Manage multiple estimates simultaneously while meeting customer and sales deadlines.Products & Applications Candidates may be responsible for estimating projects involving products such as: • Retail and POP/POS displays, • Environmental and experiential graphics, • Window, wall, and floor graphics, • Interior and exterior signage, • Trade show and event graphics, • Banners and soft signage, • Fabric graphics, • Backlit graphics, • Vehicle or fleet graphics, • Retail rollouts, • Display graphics, • Rigid signage and graphics, • Dimensional or fabricated displays, • Custom large-format print and fabrication projectsMaterials & Substrates Experience estimating with a variety of materials is preferred, including: • Vinyl and pressure-sensitive materials, • Banner materials, • Fabrics and textiles, • Acrylic, • PVC, • Foam board and foam PVC, • Corrugated plastic, • Paperboard, • Aluminum composite materials, • Polystyrene, • Styrene, • Wood and specialty substrates, • Laminates and protective films, • Adhesives and mounting materialsQualificationsPreferred Experience, • 3+ years of estimating experience in large-format printing, signage, graphics, display, POP, or a related manufacturing environment preferred., • Strong understanding of large-format digital printing and associated finishing processes., • Knowledge of both roll-to-roll and flatbed printing workflows preferred., • Familiarity with finishing equipment and processes such as CNC routing, digital cutting, laminating, mounting, sewing, welding, trimming, and fabrication., • Ability to read and interpret customer specifications, drawings, layouts, and production requirements., • Strong mathematical and analytical skills., • Strong understanding of material utilization, yields, spoilage, waste, labor, machine rates, and manufacturing costs., • Experience working with estimating, MIS, ERP, or print management software preferred., • Strong Microsoft Excel skills., • Excellent organizational and time-management skills., • Ability to manage multiple projects and deadlines in a fast-paced manufacturing environment., • Strong written and verbal communication skills., • Ability to communicate effectively with Sales, Production, Purchasing, Customer Service, vendors, and management.What We're Looking For The successful candidate will be someone who: • Thinks like a manufacturer, not simply a spreadsheet estimator., • Understands how an estimate translates into an actual production job., • Is comfortable asking questions when specifications are incomplete., • Can identify a more efficient way to produce a project., • Pays close attention to material usage, labor, machine time, and outside costs., • Understands that accurate estimating is critical to both winning business and protecting profitability., • Can balance speed and accuracy when responding to customer opportunities., • Takes ownership of their estimates from initial request through final quotation.Desired Skills, • Large-format digital printing, • Print estimating, • Cost estimating, • Material optimization, • Production planning, • Signage and graphics, • Display manufacturing, • POP/POS production, • CNC routing and digital cutting, • Fabrication, • Print finishing, • Vendor sourcing, • Manufacturing cost analysis, • Microsoft Excel, • MIS/ERP systems

Job Description Job Title: Engineering Manager Job Description We are seeking a highly skilled and motivated Engineering Manager to join our management team. The ideal candidate will lead and mentor a team of Design Engineers, Office Engineers, and Programmers/Machinists, while driving continuous improvement and ensuring the department meets its objectives efficiently and within budget. Responsibilities • Serve as a member of the management team to guide the company's direction., • Manage and mentor a team of 6, acting as both a leader and support resource., • Oversee department operations, ensuring organization, efficiency, and adherence to deadlines., • Assume full responsibility for all engineering projects, personnel, and the creation of engineering procedures., • Ensure the department achieves objectives and completes projects within budget and time frame., • Focus product development on meeting and exceeding customer requirements., • Drive continuous improvement projects and tooling initiatives., • Ensure all digital data is correctly created, stored, and entered into the ERP system., • Ensure compliance with ISO standards and maintain robust processes., • Collaborate with cross-functional teams to support manufacturing from start to finish., • Plan and manage current projects while preparing for future pipeline requirements., • Foster a culture of accountability, innovation, and professional growth within the department., • Formulate long-term objectives and performance standards for the engineering department. Essential Skills • At least 3 years of experience in a management role., • At least 5 years of experience in manufacturing engineering., • Strong management and leadership skills, with the ability to develop talent and build a department., • Ability to deliver on projects from start to finish and manage multiple projects simultaneously., • Strong understanding of GD&T, blueprint reading, machining, CNC, programming, and continuous improvement. Additional Skills & Qualifications • Bachelors degree in an engineering discipline (Mechanical, Manufacturing, Industrial preferred)., • 5+ years total engineering experience, with 3+ years in a management role., • Knowledge of CNC programming and machining operations., • Experience with continuous improvement initiatives., • Understanding of delivery timelines and pipeline planning., • Innovative thinking and product roadmap contribution., • Strong relationship management, strategy development, project management, and problem-solving skills., • Proficient in Microsoft Office and various CAD products., • Demonstrated strong oral and written communication skills. Job Type & Location This is a Contract to Hire position based out of Fairfield, NJ. Pay and Benefits The pay range for this position is $72.12 - $76.92/hr. Individual compensation offered for this position within this range will depend on many factors, including qualifications, skills, relevant experience, job knowledge, geographic location, internal equity, and other pertinent job-related factors. Eligibility requirements apply to some benefits and may depend on your job classification and length of employment. Benefits are subject to change and may be subject to specific elections, plan, or program terms. If eligible, the benefits available for this temporary role may include the following: Medical, dental & vision Critical Illness, Accident, and Hospital 401(k) Retirement Plan Pre-tax and Roth post-tax contributions available Life Insurance (Voluntary Life & AD&D for the employee and dependents) Short and long-term disability Health Spending Account (HSA) Transportation benefits Employee Assistance Program Time Off/Leave (PTO, Vacation or Sick Leave) Workplace Type This is a fully onsite position in Fairfield,NJ. Application Deadline This position is anticipated to close on Oct 9, 2026. About Actalent Actalent is a global leader in engineering and sciences services and talent solutions. We help visionary companies advance their engineering and science initiatives through access to specialized experts who drive scale, innovation and speed to market. With a network of almost 20,000 consultants and 5,000 clients across the U.S., Canada, Asia and Europe, Actalent serves many of the Fortune 500. We are proud to be an Engineering News-Record (ENR) Top 500 Design Firm for our engineering design services and a ClearlyRated Best of Staffing® winner for both client and talent service. The company is an equal opportunity employer and will consider all applications withoutregard to race, sex, age, color, religion, national origin, veteran status, disability,sexual orientation, gender identity, genetic information or any characteristic protectedby law. If you would like to request a reasonable accommodation, such as the modification oradjustment of the job application process or interviewing process due to a disability,please email actalentaccommodation@actalentservices.com for other accommodation options. San Francisco Fair Chance Ordinance:Pursuant to the San Francisco Fair Chance Ordinance, for all positions located in thecity and county of San Francisco, we will consider for employment qualified applicantswith arrest and conviction records. Massachusetts Lie Detector:It is unlawful in Massachusetts to require or administer a lie detector test as acondition of employment or continued employment. An employer who violates this lawshall be subject to criminal penalties and civil liability. Use of Artificial Intelligence (AI):We may use Artificial Intelligence (AI) to support parts of our hiring process,including sourcing, screening, and evaluating candidates. AI helps assess applicationsand qualifications, but final decisions are made by our hiring team. By applying, youacknowledge and agree that your application may be reviewed using AI tools.

Job DescriptionA precision manufacturer specializing in custom-engineered metal bellows, electroforms, and related assemblies for highly demanding applications. Serves industries such as aerospace, medical devices, and semiconductor manufacturing, with a focus on tight tolerances, reliability, and advanced fabrication techniques. SUMMARY: The CNC Operator II is responsible for operating Swiss-style CNC machines to produce precision components according to specifications. This intermediate-level role requires strong machine operation skills, the ability to interpret blueprints, and basic troubleshooting ability. The CNC Operator II works with limited supervision, is expected to complete the majority of change-over/start-up tasks and may help train entry-level operators while maintaining high standards for safety, quality, and efficiency. SUPERVISORY RESPONSIBILITIES: This role does not have supervisory responsibilities. ESSENTIAL DUTIES & KEY RESPONSIBILITIES: *Reviews blueprints to determine setup procedures to follow, machine tools required and stock to use. *Selects machine tooling and installs them on the machine. *Capable of setting guide bushings, collets and working with bar feeders with minimal supervision. *Load and edit as required machine programs. *Makes a trial run and tests for conformance to specifications using gauges, comparators, micrometers and calipers. *Adjust the machine to attain specified tolerances. *Understand blueprints and be able to use a variety of precision measuring devices. *May recommend program and or tool changes to resolve production problems. *May make tools and attachments, such as forming tools and cut-off tools, if not in stock. *Responsible for form tool sharpening and maintenance. *May work/train in other departments where needed. $23 - $36 an hour SKILLS & COMPETENCIES: *CNC machine operation and setup *Blueprint reading and GD&T interpretation *Precision measurement and quality inspection *Troubleshooting and problem-solving *Attention to detail and accuracy *Time management and efficiency *Safety awareness and compliance *Ability to read and interpret part specifications or blueprints. *Detail-oriented. *Good verbal and communication skills. EDUCATION & EXPERIENCE Required Must have a Minimum of two (2) years" experience in CNC operations and setup, specifically Swiss-style machining/turning *Proficiency with basic CNC setup, offsets, and tool changes. *Strong ability to read blueprints and understand GD&T symbols. *Skilled in using precision measurement tools (calipers, micrometers, height gauges, etc.). *Basic understanding of machining principles, speeds/feeds, and material properties. *Familiarity with safety standards and best practices in a machining environment. Desired *Any experience lathes, mills, CNC machines, etc. a plus. *Experience on Citizen Swiss machines. By applying for this job, you agree to receive calls, Al-generated calls, text messages, or emails from Synerfac Technical Staffing and our contracted partners. Frequency varies for text messages. Message and data rates may apply. Carriers are not liable for delayed or undeliverable messages. You can reply STOP to cancel and HELP for help. You can access our privacy policy at www.synerfac.com/privacy/

Job DescriptionJob Title: Machinist (Haas Mills & Lathes / CAD-CAM) We are seeking a highly skilled Senior CNC Machinist with at least 10 years of experience to join our team. This job is located in Williamstown, NJ. Key Responsibilities • Setup and Operate: Program, set up, and run Haas CNC mills and lathes independently., • CAD/CAM Programming: Create and modify complex toolpaths using CAD/CAM software., • Blueprint Reading: Interpret technical drawings, geometric dimensioning, and tolerancing (GD&T)., • Quality Control: Inspect parts using calipers, micrometers, and gauges to ensure precise tolerances., • Maintenance: Perform routine machine maintenance and troubleshoot operational issues.Qualifications, • Experience: Minimum 10 years of professional CNC machining experience., • Machine Mastery: Proven expertise specifically with Haas mills and lathes., • Software Skills: Proficient in CAD/CAM programming (e.g., Mastercam, Fusion 360, SolidWorks)., • Technical Skills: Deep understanding of metal cutting mechanics, fixtures, and tooling., • Work Ethic: Strong problem-solving abilities and a sharp eye for detail.What We Offer, • Competitive hourly pay based on experience., • Comprehensive health, dental, and vision benefits., • Paid time off and holiday pay., • 401(k) matching program., • Clean, safe, and climate-controlled shop environment. Powered by JazzHR pdxBeHs8Uh

Job DescriptionCompany Description STS Aerospace is a leading aerospace manufacturing and engineering company specializing in fluid conveyance solutions for commercial aviation, defense, and space applications. The company designs and manufactures high-performance rigid tubing, flexible hose assemblies, and custom-engineered fluid transfer systems used in critical aerospace platforms worldwide. With a strong commitment to quality, innovation, and customer service, STS Aerospace delivers reliable solutions that support the safety and performance of mission-critical aerospace systems. Job Description The Quality Engineer – Machine Shop is responsible for supporting and improving product quality, process control, inspection readiness, and customer compliance within a precision CNC machining environment. This role is focused on preventing defects, reducing scrap and rework, improving First Pass Yield (FPY), and ensuring machined components meet engineering drawings, customer requirements, AS9100/AS9102 expectations, and internal quality standards. The ideal candidate is hands-on, technically strong, and comfortable working directly with machinists, inspectors, manufacturing engineering, programming, production, purchasing, and quality leadership to identify process risks, investigate nonconformances, develop corrective actions, and implement practical solutions on the shop floor. Responsibilities: Machine Shop Quality Support (but not limited to) • Provide technical quality support for CNC turning, milling, deburr, inspection, and secondary machining operations., • Interpret engineering drawings, GD&T requirements, customer specifications, routers, job plans, and inspection requirements., • Partner with machinists, programmers, manufacturing engineering, and production supervision to resolve dimensional, visual, material, and process-related quality concerns., • Support first piece, in-process, final inspection, FAI development, FAI review, and inspection method sheet requirements., • Assist with CMM, manual gage, special gage, and fixture-related inspection planning and verification where applicable. Root Cause, Corrective Action, and Continuous Improvement (but not limited to) • Lead or support RCCA investigations for internal rejects, customer escapes, rework, scrap, repeat defects, and process breakdowns., • Define containment actions, verify affected inventory/WIP, support disposition activities, and ensure corrective actions are effective., • Use quality data to identify trends, prioritize risk, and drive improvements in FPY, scrap/rework reduction, inspection flow, and customer escape prevention., • Support rework job plans by reviewing requirements, risks, inspection steps, and verification criteria. Quality Systems, Compliance, and Audit Readiness (but not limited to) • Support compliance with AS9100, AS9102, customer quality requirements, internal procedures, and applicable aerospace manufacturing standards., • Participate in internal, customer, and external audits by preparing objective evidence, supporting responses, and completing assigned follow-up actions., • Support calibration, gage control, inspection documentation, material certification review, traceability, and quality record requirements., • Support risk mitigation activities including FAI planning, inspection planning, customer return analysis, and process control improvements. Customer and Cross-Functional Support • Support customer quality requests, customer returns, corrective action responses, inspection evidence, and documentation packages., • Communicate quality expectations clearly across departments and promote a culture of ownership, prevention, and right-first-time manufacturing.Qualifications, • Bachelor’s degree in Engineering, Manufacturing, Quality, or a related technical field preferred. Equivalent hands-on aerospace machining, inspection, quality engineering, or manufacturing engineering experience may be considered., • 3–5 years of experience in a precision manufacturing, CNC machining, aerospace, or regulated quality environment preferred. Experience with GD&T, FAI/AS9102, RCCA, nonconforming material, inspection planning, CMM/manual inspection methods, calibration, and ERP-based quality records is strongly preferred., • MS Office with strong Excel skills required. ERP/MRP experience preferred, including JobBOSS/JobBOSS² or similar systems. Experience with quality documentation systems, CMM software, FAI/ballooning tools, inspection data reporting, and corrective action tracking preferred., • In addition to strong computer skills, the candidate should have practical knowledge of CNC machining processes, inspection methods, GD&T, blueprint interpretation, gage usage, material traceability, root cause analysis, corrective action, and quality system requirements in a regulated manufacturing environment. Additional Information All your information will be kept confidential according to EEO guidelines. We believe that different perspectives and backgrounds are what make a company flourish. All qualified applicants will receive equal consideration for employment regardless of color, religion, sex, sexual orientation, gender identity, national origin, economic status, disability, age, or any other legally protected characteristics. We are proud to be an inclusive company with values grounded in equality and ethics, where we celebrate, support, and embrace diversity. At no time during the hiring process will Smiths Group, nor any of our recruitment partners ever request payment to enable participation – including, but not limited to, interviews or testing. Avoid fraudulent requests by applying jobs directly through our career’s website (Careers - Smiths Group plc)

Job Description Night Shift CNC Manager Location: Newark, NJ – Headquarters Schedule: Monday–Thursday, 5:00 PM–3:00 AM Compensation: $100,000-$120,000 Reports to: Director of Production Why This Role Exists We are looking for a strong production leader to take ownership of our night shift. This role is less about being the strongest CNC technician in the building and more about being an effective manager who can lead people, maintain accountability, follow production closely, and make sure the shift operates safely and consistently. You will lead a night-shift team of approximately 10–15 employees in a CNC-focused production environment. What You Will Own • Lead and manage approximately 10–15 night-shift production employees., • Maintain clear expectations around productivity, attendance, safety, quality, and performance., • Follow production throughout the shift and make sure daily output goals are achieved., • Address performance, staffing, workflow, and operational issues as they arise., • Maintain strong safety standards and reinforce safe operating practices., • Ensure quality issues are identified and addressed quickly., • Monitor production equipment and coordinate with Maintenance when downtime or equipment problems occur., • Keep the team focused, productive, and accountable throughout the shift., • Communicate clearly with Production leadership and the day shift regarding output, downtime, staffing, quality concerns, and outstanding issues., • Identify opportunities to improve productivity, workflow, and overall shift performance., • Develop employees and build greater accountability within the team. What Success Looks Like • The night shift consistently meets production expectations., • Employees understand what is expected and are held accountable., • Safety and quality standards are maintained., • Problems are handled quickly rather than left for the following shift., • Production leadership has clear visibility into night-shift performance., • Equipment, staffing, and production issues are escalated appropriately without unnecessary dependence on senior leadership., • The team becomes stronger, more disciplined, and more self-sufficient over time. What You Need • 5+ years of manufacturing, production, or operations leadership experience., • Experience directly managing production employees in a manufacturing environment., • Strong people-management skills with the ability to coach, hold employees accountable, and handle difficult performance situations., • Strong communication, judgment, and problem-solving ability., • Experience managing production goals, quality, safety, staffing, and day-to-day execution., • Ability to independently lead a night-shift operation., • Comfortable working around CNC machinery, automated equipment, or other production equipment. Preferred, Not Required • CNC manufacturing experience., • Cabinet, woodworking, automotive, metal fabrication, plastics, or other high-volume manufacturing experience., • Lean manufacturing or continuous improvement experience., • Bilingual English/Spanish. Email Resume: Joel@maiplacement.com Apply Online: https://jobs.crelate.com/portal/maiplacement/job/z93qi3r4gboxp7pqzzjtmbpd4r Refer a friend and earn up to $1,000 upon a successful placement.

Job Description Under minimum supervision working from blueprints, sketches written and/or verbal instructions, sets up and performs the most diversified and complex progressive machining, fitting and assembly operations. Determines proper tooling and sequence of operations, and skillfully uses all machinists’ hand tools and machine shop measuring equipment in order to produce work to specifications. Must be able to make complicated set-ups and operate available machine tools; determine operational sequences, proper jigs, fixtures and design of tool to be used. ESSENTIAL FUNCTIONS • Must be able to make complicated set-ups and operate available machine tools; determine operational sequences, proper jigs, fixtures and design of tools to be used., • Must be able to skillfully use all machinist’s hand tools and measuring instruments., • Must be familiar with the machining of most materials., • Must be able to use advanced shop math, including trigonometry., • Moves parts to and from the work area., • Maintains good housekeeping in the work area., • Meets all safety requirements in the machine shop and follows all company policies., • Performs miscellaneous job-related duties as assigned by supervision. MINIMUM QUALIFICATIONS • Requires a High school diploma or equivalent education, • Requires the completion of an apprenticeship program or similar on the job experience of approximately four years or at least five years experience as a machinist., • Demonstrates effective verbal and written communication skills. KNOWLEDGE, SKILLS AND ABILITIIES REQUIRED • Ability to operate standard and specialized equipment to produce prototype and/or production parts, • Ability to perform standard shop computations, using technical math, geometry and trigonometry., • Candidate must have “Team” like mentality and be willing to work with a group EQUIPIMENT/MACHINERY USED • CNC machining centers, • Bridgeport-type milling machines and ProtoTRAK systems, • Hardinge-type toolroom precision lathes and engine lathes, • Tool and surface grinders, • CMMs and optical comparators, • Digital height gages, micrometers, and other precision measuring instruments, • Shop inspection and quality control equipment PHYSICAL REQUIREMENTS • Moderate physical activity., • Requires handling of average-weight objects up to 50 pounds and pushing, pulling or standing and walking for extended periods of time. Salary Range:$31.57 To $56.75 Hourly The job location is at 2 Lawrence Road, Springfield, NJ 07081 We're an equal opportunity employer. All applicants will be considered for employment without attention to race, color, religion, sex, sexual orientation, gender identity, national origin, veteran or disability status. Please note: The salary range is based on our market pay structure. However, individual salaries are determined by a variety of factors including, but not limited to, business considerations, local market conditions, and internal equity, as well as candidate qualifications, such as skills, education, and experience. Employee Benefits: At Valcor Engineering, we support our employees in all aspects of their life, including their health and financial well-being. Regular employees scheduled to work 30+ hours per week are offered: health, dental, and vision insurance; health savings accounts; a 401(k) savings plan; long term disability coverage; and life and accident insurance. We also have an employee assistance program. Our leave programs include Vacation and PTO time off, paid holidays, as well as other types such as bereavement, and any applicable federal and state sick leave. Employees may participate in the company recognition program to receive monetary or non-monetary recognition awards. We are an equal opportunity employer and do not discriminate on the basis of race, color, religion, sex, national origin, age, disability, genetic information, veteran status, sexual orientation, gender identity, or any other characteristic protected by law. All qualified applicants will be considered for employment without regard to these characteristics. \nCompany Description Valcor Engineering is one of the largest and most recognized suppliers of fluid control products in the aircraft, aerospace and military fields. We specialize in the design and manufacture of Solenoid Valves and control components for liquids and gases in critical application in the aerospace, nuclear, light industrial and scientific industries. Valcor Engineering is one of the largest and most recognized suppliers of fluid control products in the aircraft, aerospace and military fields. We specialize in the design and manufacture of Solenoid Valves and control components for liquids and gases in critical application in the aerospace, nuclear, light industrial and scientific industries.

Job Description Position Overview The Night Shift CNC Manager is responsible for leading night shift CNC manufacturing operations to deliver safe, consistent, and efficient production results. This role owns shift performance across safety, quality, delivery, and cost while partnering with the Day Shift CNC Manager, Production, Quality, Maintenance, and other supporting teams to maintain strong operations across shifts. Key Responsibilities • Lead, coach, and develop supervisors, team leads, and production employees across the night shift., • Own night shift CNC production performance, including safety, quality, output, machine uptime, and labor efficiency., • Oversee approximately 10 CNC machines, two edge-banders, and supporting production equipment to meet daily production goals., • Manage staffing, overtime, workflow, and production priorities based on business needs and available capacity., • Monitor equipment downtime and partner with Maintenance to identify root causes, improve machine reliability, and minimize production interruptions., • Address quality issues quickly and work with Quality and Production teams to prevent recurring problems., • Review production data to identify opportunities to increase machine output, improve labor efficiency, and drive continuous improvement., • Provide clear daily shift reporting and maintain strong handoffs with the Day Shift CNC Manager, including performance, downtime, quality concerns, staffing issues, and open priorities.Qualifications, • 5+ years of manufacturing leadership experience, including experience leading supervisors, team leads, and production employees., • Hands-on leadership experience in CNC machining, automated manufacturing, or a high-volume production environment., • Demonstrated ability to improve productivity, reduce equipment downtime, and develop production teams., • Strong communication, decision-making, and problem-solving skills with the ability to lead independently during night shift operations., • Experience using production data and performance measures to identify issues and drive improvements., • Experience in cabinet manufacturing, woodworking, automotive, metal fabrication, or plastics manufacturing preferred., • Lean Manufacturing, Six Sigma, continuous improvement experience, and/or bilingual English/Spanish skills are preferred.

Job Description Also need for S Cal and W PA Sodick Corporation, leading manufacturer of CNC EDM machinery, is looking for Field Service Engineers. The Field Service Engineer reports to the National Service Manager and is responsible for traveling to customer and dealer facilities to service and install company machinery. Responsibilities: 1. Travel to customers' facilities to install, service and perform basic training on all company machinery., 2. Troubleshoot both electronic and mechanical problems that can occur on-site by using proper basic testing equipment (i.e. multimeter or oscilloscope)., 3. Examine customers' complaints regarding equipment malfunction and service issues, and communicate with customer and internal management regarding the technical analysis and determination., 4. Document all work done in a legible and technically sound manner., 5. Submit both service and expense reports for reimbursement. Qualifications and Skills Required: 1. Minimum Associate's Degree in Electronics required., 2. Machine shop experience preferred., 3. Excellent customer service skills, including ability to maintain integrity and ethics in all conversations and actions with customers., 4. Self-motivated, able to work with little or no supervision and to calmly handle stressful situations when customers complain of equipment malfunctions., 5. Possess technical curiosity and ability to diagnose and solve production issues., 6. Detail-oriented and able to get work completed in a manufacturing environment., 7. Must be able to travel up to 80% of the time. #ZR

Job DescriptionCNC Turning Machinist – Prototype & Production Where: Paterson, NJ When: Monday–Friday, 8:00 AM–3:30 PM Compensation: $28.00/hour, based on experience and skills Make precision your craft Own the turning process from setup to final inspection. You’ll bring HAAS CNC lathes up to speed, switch over to HAAS mills when needed, and keep work flowing with clean setups and accurate offsets. You’ll validate your first piece, monitor quality, and adjust as you go—especially when working aluminum and stainless steel. As you grow, you’ll add new capabilities by learning additional machines, including Kiwa. Your impact • Translate blueprints and technical drawings into accurate parts., • Complete multiple machine setups; set tool lengths and manage offsets., • Perform first-article inspections and verify specs before production runs., • Hold tight tolerances in aluminum and stainless-steel machining., • Make precision adjustments to sustain quality and throughput., • Uphold safety and quality procedures without compromise., • Keep the work area orderly for efficient changeovers. What helps you succeed, • High school diploma or equivalent., • Experience setting up and operating HAAS CNC lathes/mills (preferred)., • Hands-on background machining aluminum and stainless steel., • Mastercam programming knowledge preferred., • Strong command of basic math and geometry., • Comfort with basic computer tasks., • Reliable, self-directed, and accountable., • Positive mindset with a willingness to learn. Role logistics Pay: $28.00/hour, based on experience and skills Hours: Monday–Friday, 8:00 AM–3:30 PM Location: Paterson, NJ

Job DescriptionLaser / Punch Press Programmer Location: Bergen County, NJ (on-site) Salary: $80,000 - $100,000 Type: Full-time, Exempt Reports to: Production Manager About the Opportunity A precision medical device contract manufacturer is looking for a hands-on Laser / Punch Press Supervisor to lead its sheet metal fabrication department. You'll own programming, scheduling, tooling, and people for the department. This is a strong fit for an experienced programmer who is ready to run a team in a regulated, high-quality environment. What You'll Do Develop and oversee CNC programs for laser cutting and turret punch press components, delivered on time and right the first time Run day-to-day department operations and partner with the Production Manager and other supervisors across two facilities Schedule and stage work orders, assign operators, and give them the job information they need Step in as a backup programmer or operator when needed Design and select tooling for specific materials and processes Review ECNs and update programs according to internal procedures Coordinate with Maintenance to keep equipment properly maintained, and make sure operators handle routine upkeep Help manage the team, including hiring, training, corrective actions, and annual reviews Drive continuous improvement in run rate, quality, and efficiency across programs, processes, and tooling Support special projects such as quoting, purchasing, and validating new equipment and technology What You Bring 10+ years of laser and/or punch press experience, including 5+ years of hands-on programming Experience with Amada, LVD, Trumpf, or comparable equipment. Amada AP100 programming is a strong plus. Ability to set up and run laser and punch jobs from supplied layouts, and to choose the right tooling Experience in a highly regulated manufacturing environment. Medical device or ISO 13485 experience is a plus. Working knowledge of GMP Strong GD&T, blueprint reading, and knowledge of sampling and inspection plans Comfort with precision measuring instruments Proficiency with AutoCAD, SolidWorks, MS Office, and production or ERP systems Leadership and communication skills to work with all levels of the plant and, occasionally, customers A record of success in a fast-paced, deadline-driven shop Bachelor's degree preferred, or equivalent experience Physical Requirements Standing for long periods, with frequent bending, stooping, pushing, and pulling Lifting up to 25 lbs Keeping work areas clean, organized, and safe 10+ years of laser and/or punch press experience, including 5+ years of hands-on programming Experience with Amada, LVD, Trumpf, or comparable equipment. Amada AP100 programming is a strong plus. Ability to set up and run laser and punch jobs from supplied layouts, and to choose the right tooling Experience in a highly regulated manufacturing environment. Medical device or ISO 13485 experience is a plus. Working knowledge of GMP Strong GD&T, blueprint reading, and knowledge of sampling and inspection plans Comfort with precision measuring instruments Proficiency with AutoCAD, SolidWorks, MS Office, and production or ERP systems Leadership and communication skills to work with all levels of the plant and, occasionally, customers A record of success in a fast-paced, deadline-driven shop Bachelor's degree preferred, or equivalent experience By applying for this job, you agree to receive calls, Al-generated calls, text messages, or emails from Synerfac Technical Staffing and our contracted partners. Frequency varies for text messages. Message and data rates may apply. Carriers are not liable for delayed or undeliverable messages. You can reply STOP to cancel and HELP for help. You can access our privacy policy at www.synerfac.com/privacy/