Cnc jobs in Norwalk, CaliforniaCrear alertas

Job Description This position is responsible for daily set-up and operations of CNC laser cutting machines used in production of sheet metal and plate parts. Fabricate sheet metal products and equipment, such as ducts, control boxes, covers, brackets, and plates to name a few. Work will involve set up and operation of Amada CNC laser cutting machines to produce sheet metal parts. ESSENTIAL FUNCTIONS • Perform daily machine startup and shut-down procedure on CNC cutting equipment., • Stage raw material at each work center for production processing., • Load/unload materials and parts finish from CNC cutting equipment to maintain production schedule., • Perform maintenance and cleaning of production equipment and work area in accordance with company and manufacturers machine recommendations., • Perform machine alignment procedure and/or optical cleaning to keep CNC cutting equipment at peak operating performance., • Perform laser cutting conditions (Voltage power, gas, feed rate) to optimize machine cutting process., • Ensure production schedule are follow through based on approved production schedule., • Monitoring assist gas and resonator gas levels and recommended supply requirements for daily production., • Operator to coordinate with supervisor for machine maintenance., • Operator to coordinate with supervisor to keep production throughput., • Monitor material usage and order for production throughput., • Maintain document control per departments ISO standards., • Supporting company policies and procedures, goals and objectives, ISO policies, and good manufacturing practices., • Use Infor to keep track of work orders on a daily basis, • Employees are to speak only English during an emergency and while performing job duties where there is potential for an emergency. The rule does not apply to casual conversations between employees when they are not performing a job duty., • Keep the laser area clean on a daily bases., • Knowledge of manufacturing concepts., • Understand G-code for laser cutting systems, • Ability to grasp modern technology quickly., • Familiar with sheet metal flat patterns., • Must have good analytical skills and should be detail-oriented., • Must be able to work in a team and follow deadlines., • Must have good communication skills.PAY RANGE: Requires ability to bend, lift, stoop, reach, stand, crawl, and climb. EDUCATION and QUALIFICATION • AA in engineering discipline desired (but not necessary), • Experience and/or trained operating a Laser/CNC cutting machines. Note this job description is not designed to cover or contain a comprehensive listing of activities, duties or responsibilities that are required of the employee for this job. Duties, responsibilities, and activities may change at any time with or without notice.

Job Description CNC Machine/Deburr/Bonding New-hire will have the opportunity to work in the lathes as well as supporting other areas such as deburring and bonding. 1+ year of Machining Experience preferred, Ability to read blueprints, and perform self-inspection using micrometers, Calipers, Sunnen Bore Gages, Comparator, and Height Gages. Operate HAAS Mills VM3 - VM2 - VF4 - VF9 Operate Mori Seiki Lathes Must be able to stand for prolonged periods performing repetitive tasks for 10 hours a day. RBC Bearings offers a competitive benefits package. Disclaimer: The above statements are intended to describe the general nature and level of work being performed by people assigned to this function. They are not intended to be an exhaustive list of all responsibilities, duties or skills required of incumbents. MIN: $24.00 to $26.00 **Please note that the salary range information is only applicable to California. This range is the company's good faith and reasonable estimate of the compensation for this role based on the position's responsibilities, qualifications, experience, and other relevant factors. Actual compensation may vary depending on the selected candidate's specific experience, education, skills, and other relevant factors. Equal Opportunity Employer RBC Lubron Bearing Systems is an equal opportunity employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, gender, sexual orientation, gender identity, national origin, disability, or veteran status. This role is subject to compliance with the International Traffic in Arms Regulations (ITAR) and the Export Administration Regulations (EAR), which requires the incumbent to be either a US citizen, lawful permanent resident [“green card” holders] or have refugee or asylee status.

Job DescriptionDescription: Position Summary: We are seeking an experienced CMM (Coordinate Measuring Machine) Operator to join our quality assurance team. The ideal candidate will hands-on experience operating and programming CMM equipment to ensure precision and compliance with engineering specifications. This role requires strong attention to detail, technical expertise, and a commitment to maintaining high-quality standards in a manufacturing environment. Requirements: Key Responsibilities: • Operate and program CMM machines (Mitutoyo) to inspect and measure parts according to engineering drawings and specifications., • Interpret blueprints, GD&T (Geometric Dimensioning and Tolerancing), DPD (Digital Product Definition) and technical documentation to perform accurate measurements., • Create and modify CMM programs using software such as MCOSMOS., • Perform first article inspections, in-process checks, and final inspections to ensure product quality., • Document inspection results and maintain accurate records in accordance with quality standards., • Troubleshoot measurement discrepancies and collaborate with engineering and production teams to resolve issues., • Maintain CMM equipment and ensure calibration compliance., • Experience: 3–5 years operating and programming CMM machines in a manufacturing or aerospace environment (preferred)., • Technical Knowledge: Proficient in GD&T, blueprint reading, and metrology principles., • Software: Experience with CMM programming software (MCOSMOS, equivalent)., • Strong analytical and problem-solving skills., • Ability to work independently and as part of a team., • High school diploma or equivalent required, • Experience with additional inspection tools (micrometers, calipers, height gauges)., • Familiarity with ISO 9001 and AS9100 standards., • Knowledge of CNC machining processes is a plus.

Job Description Position Title: CNC Programmer Location: Montebello, CA 90640, USA Job Category: Manufacturing Req ID: CNCPR001448 Schedule: Full Time Posted:Nov 4, 2025 Job DetailsDescription Close to You Anywhere in the World Groupe SEB is the global reference for small domestic appliances, cookware and professional coffee with its portfolio of 35 emblematic brands such as Tefal, Seb, Rowenta, Moulinex, Calor, Lagostina, Krups, WMF. Present in 150 countries, we produce in more than 40 industrial sites and sell 11 products per second. We believe in the richness of diversity and aspire to create an inclusive and stimulating work environment where our more than 30,000 employees can grow and give their best. SEB Professional is a subsidiary of Groupe SEB. At SEB Professional North America, we are a leader in the professional coffee machine industry, offering three equipment lines: Schaerer, WMF, and Curtis. Our innovative coffee machines are trusted worldwide and can be found in a variety of settings, including hotels, restaurants, coffee shops, and convenience stores. You've likely enjoyed coffee from our machines at McDonald's, Dunkin', Chick-fil-A, Peet’s, or Tim Hortons. Join us in delivering exceptional coffee experiences worldwide. What We Will Achieve Together: The CNC Programmer is the Subject Matter Expert and works independently, making decisions related to the interpretation from reading blueprints, translating these into the proper set up of mills, lathes, lasers to accurately set the tolerance limits in support of “just in time” delivery of fabrication to production. The CNC Programmer acts as a backup to the Supervisor/Manager covering vacation and sick time and the CNC Programmer trains others in the programming and setup for the application of job runs. Base Salary Range: $30/hr - $38/hr DOE. Key Responsibilities Include: • Collaborates with engineering on building prototypes, • Leads and/or Assists in the design and development of machine tooling, • Proficient in set up and operation of Turrets, Laser, Panel Bender, Safan, • First article inspection, • Adjusts machine settings to operate machinery in accordance with established procedures, • Communicate machine operation or parts defects, • In collaboration with the Fabrication Manager makes decisions on spending needs for the machine shop equipment, • Assists Machine Operators answering questions and solving problems, • Identify tool and die issues and perform repair (sharpening) and replacement of tool & die, • Observes operation of machine and verifies conformance of formed or cut workpiece to specifications, using measuring instruments, such as fixed gauges, calipers, and micrometers, • Sources and obtains quotes on machine shop tooling needs, • Leads and Supports training and preparing bench strength, • Ensures that all IMS Standards are maintained and followed, • Has responsibility for scrap control and reduction, • Review production schedule for turret and laser and maximize sheet metal yield, • Runs simulations for new routings and bill of materials for costing purposes, • Maintain cleanliness of workstations, • Ability to operate electric pallet jack and hand pallet jack Requirements: • Experience: Minimum of 3 years of experience in a role with equivalent experience. Preferably in a fast-paced organization with an international presence. Manufacturing experience is a must., • Education: High School Diploma., • Certification: CNC Programmer from accredited school/program., • Key Skills: CNC Programming, Blueprint Reading, CAD/CAM Software, Machine Tooling, and Safety Standards., • Core Competencies: Problem Solving, Interpersonal Skills, Action Orientation, Detail Orientation, Effective Communication and Collaboration. Overview: • Type of Employment: Full time. Non-Exempt, • Workplace Schedule Type: On-Site (May be required to work weekends), • Position Location: Montebello Why SEB Professional North America? Whether working remotely, in one of our offices, or flexing in between, we offer a number of benefits and perks to support you and your family. Here is a sample of some of our benefits programs: • Medical / Dental / Vision Insurance – Generous Employer Contribution, • 401(K) Retirement Plan, • w/ up to a 9% employer contribution after 1st year of employment., • On Site Gym, • 12 Paid Holidays, • Voluntary Benefits and Discount programs Equal Employment Opportunity (EEO) SEB Professional is an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability, marital status, protected veteran status, or any other category protected by federal, state, or local law. SEB Professional does not make employment decisions based on any protected class status. For more information, please see OFCCP Equal Employment. PIab565e13c85c-25405-38973212

Job Description We have partnered with a leading aerospace manufacturer in Signal Hill who is seeking a CNC Mill Operator. This position is contract-to-hire. Shift: 1st 7:30am-4:00pm M-F Pay Rate: $30.00/hr. We are looking for an experienced CNC Mill Operator to join our team. The ideal candidate will have a thorough understanding of CNC machines and the ability to operate them in a safe and efficient manner. The successful candidate will be able to read and interpret blueprints, set up and adjust CNC machines, and maintain quality control standards. This is an excellent opportunity for someone who is looking to work in a fast-paced environment and gain valuable experience in the manufacturing industry. Responsibilities: • Read and interpret blueprints and drawings., • Set up and operate CNC machines., • Perform routine maintenance on CNC machines., • Check finished parts for accuracy and quality., • Monitor machine performance and make adjustments as needed., • Maintain a clean and safe work environment., • Tool Swapping, • Use precision measuring tools (calipers, micrometers, gauges) Pay Rate: $30.00/hr Job Type: Full-time Benefits: • Dental insurance, • Health insurance, • Health savings account, • Paid time off Company DescriptionPathway Group is a Recruitment and Staffing service dedicated to the Manufacturing Industry. We pride ourselves on being expert recruiters in the space staying true to our manufacturing recruitment vertical. The vast majority of our placements are contract to hire and direct hire placements. Our goal is to add value to the client and candidate. Placing the right candidate into their next career. We focus on positions like mechanical assemblers, electrical assemblers, CNC operators, CMM operators, composite technicians, quality technicians, engineers, managers, etc.Pathway Group is a Recruitment and Staffing service dedicated to the Manufacturing Industry. We pride ourselves on being expert recruiters in the space staying true to our manufacturing recruitment vertical. The vast majority of our placements are contract to hire and direct hire placements. Our goal is to add value to the client and candidate. Placing the right candidate into their next career. We focus on positions like mechanical assemblers, electrical assemblers, CNC operators, CMM operators, composite technicians, quality technicians, engineers, managers, etc.

Job Description Supertec Machinery Inc is looking for a CNC Grinding application engineer/CNC service engineer at the moment. They want someone with experience in our industry, preferably to have actual grinding application knowledge. They sell cnc cylindrical, surface, ID/OD, centerless, vertical, rotary grinders. It would be amazing if they could do it all. They prefer someone who specializes in CNC cylindrical and ID/OD. #ZR

Job Description Company Overview: Scotia Engineering, Inc. is a growing precision machine shop in Santa Fe Springs serving aerospace and industrial customers. We’re a small, efficient team that values quality, autonomy, and results. You’ll have real responsibility and the satisfaction of turning your programming into finished parts. Job Description: We’re hiring a CNC Programmer who can take a job from print to part. You’ll program using MasterCam at a dedicated workstation, then set up and run your own jobs on Haas or Fanuc machines. You’ll also make program edits as needed, either in MasterCam or at the machine. This is not a button-pushing role. We need a skilled programmer who can also handle machining. Core Responsibilities: Programming (Primary) * Program CNC parts using MasterCam (mostly milling, some turning) * Post-process and transfer code to Haas/Fanuc machines * Edit G-code at the machine when needed Machining (Secondary) * Set up and run the jobs you've programmed * Inspect parts using conventional measurement tools (i.e., calipers, micrometers, etc.) and make adjustments as needed * Document setups, suggest process improvements, and maintain a clean and efficient workstation Required Experience: * 3–5+ years of programming with MasterCam software * Confident with Haas and/or Fanuc controls • Able to go from print to finished part, including programming, setup, and first article Strong knowledge of tooling, feeds/speeds, and shop math Preferred Qualifications: * 5–7 years of programming/setup experience * Tight-tolerance or aerospace experience * Comfortable troubleshooting and improving processes Not a Fit If: * You’ve only made light edits at the machine * You rely on others for setups or programming * You don’t regularly use MasterCam Work Environment: * Monday–Friday day shift (~40–45 hours/week) * Small-team, hands-on shop * Results-focused with no bureaucracy Compensation: * $28–$38/hour (DOE) * Overtime eligible * PTO accrual * Company-provided work shirts * More benefits under review—ask during the interview! How to Apply: Apply on ZipRecruiter. Stand out by sharing: * What machines/controls you’re strongest on * How long you’ve done programming and setup * What you enjoy most about machining * Whether you own your own inspection tools Company DescriptionScotia Engineering, Inc. is a growing precision CNC machine shop in Santa Fe Springs, CA, serving aerospace, space flight, and high-spec industrial customers. We’re a lean, tight-knit team that takes pride in building quality parts without the corporate fluff. If you're the kind of person who prefers chips flying instead of Zoom meetings, you’ll fit right in. We value experience, accountability, and the satisfaction of getting great work done.Scotia Engineering, Inc. is a growing precision CNC machine shop in Santa Fe Springs, CA, serving aerospace, space flight, and high-spec industrial customers. We’re a lean, tight-knit team that takes pride in building quality parts without the corporate fluff. If you're the kind of person who prefers chips flying instead of Zoom meetings, you’ll fit right in. We value experience, accountability, and the satisfaction of getting great work done.

Job DescriptionDescription: About Us: PMD INC is a leading aerospace manufacturing company specializing in precision aircraft parts. We pride ourselves on innovation, precision, and quality, delivering top-notch solutions to our clients worldwide. We are seeking an experienced 5-Axis CNC Programmer to join our dynamic team and contribute to our continued success. Requirements: Job Summary: As a 5-Axis CNC Programmer with 10 years of experience, you will be responsible for programming, setting up, and operating 5-axis CNC machines to produce high-precision parts. Your expertise in interpreting technical drawings, developing efficient machining processes, and ensuring the highest quality standards will be crucial in maintaining our reputation for excellence. Please note that this is an on-site position. Key Responsibilities: • Develop, write, and optimize CNC programs for 5-axis machining centers to produce complex components., • Set up and operate 5-axis CNC machines, including tool selection, fixture setup, and part alignment., • Interpret engineering drawings, specifications, and CAD models to determine machining requirements., • Conduct test runs and first article inspections to validate program accuracy and part conformity., • Troubleshoot and resolve machining issues, ensuring minimal downtime and maintaining production schedules., • Collaborate with engineers, designers, and production teams to improve processes and implement design changes., • Utilize CAM software to create efficient and effective tool paths., • Adhere to safety protocols and maintain a clean and organized work environment., • Minimum of 10 years of experience as a CNC programmer, with at least 5 years specializing in 5-axis machining (aerospace preferred), • Proficiency in CAD/CAM software (Mastercam and Catia preferred)., • Certificate or associate degree in CNC programming, machining, or a related technical field (or Bachelor’s degree in engineering), • Strong understanding of G-code, M-code, and CNC programming principles., • Extensive experience with various materials, including metals, plastics, and composites., • Excellent problem-solving skills and attention to detail., • Ability to read and interpret complex engineering drawings and blueprints., • Solid knowledge of tooling and fixturing techniques for 5-axis machining., • Strong mathematical skills and understanding of geometric dimensioning and tolerancing (GD&T)., • Excellent communication and teamwork abilities., • Experience with Kitamura, Mori Seki, Fadal, and Fanuc Controls., • Familiarity with industry-specific standards and quality assurance procedures., • Competitive salary and benefits package., • Opportunities for professional development and career advancement., • A collaborative and supportive work environment., • Cutting-edge technology and state-of-the-art facilities.

Job Description CNC Lathe Machinist – Defense Search OVERVIEW Are you looking for a new career opportunity with an exciting Defense/Aerospace company?! Then we've got the right team for you! In this role, you're responsible for the duties listed below. Immediate opening for a CNC Lathe Machinist in Paramount, CA who possesses: • 5+ years of experience with CNC lathe operations, • Dedication to learning and growing as a machinist, • Ability to read blueprints and mill experience is a plus Email resumes to and call 858.239.2851. FULL DESCRIPTION: The selected candidate will be responsible for: • Operate CNC cell consisting of 3-5 CNC machines one of which may be a CNC mill., • Check parts with provided micrometers, height gages, thread gages, bore gages, air gages, indicators to check, • run out and use any other inspection tools provided., • Provide in process parts to inspection to validate inspection done at the machine., • Adjust offsets as required to ensure parts meet blueprint requirements., • Change tools as required and re-check dimensions after tool change., • Inform first shift of any issues encountered on second shift., • Stay focused on ensuring parts meet print and keeping machines running., • Operate all machines in a safe manner., • Do not operate any equipment that you do not know how to use., • Keep work area clean and organized., • Keep completed parts on a sperate pallet., • Segregate and paint red any non-compliant parts., • Do not use cell phone while working, use on break time or lunch time only., • Stay in cell during work hours. The selected candidate will also possess: • 5 years of experience running CNC lathes, • Ability to read blueprint., • Ability to use hand tools to measure parts., • Good attendance. Must show up on time every day., • Must be able to organize tools, parts and work area., • At minimum must be a High School graduate., • Must know shop math. Salary Range: $33-37/hour For immediate and confidential consideration, please email your resume to and call 858.239.2851. More information can be found at Company DescriptionDefense Search is a specialized recruiting and staffing firm dedicated exclusively to the defense & aerospace industry. We place candidates on a contract, contract-to-hire, and direct hire basis.Defense Search is a specialized recruiting and staffing firm dedicated exclusively to the defense & aerospace industry. We place candidates on a contract, contract-to-hire, and direct hire basis.

Job Description Make Your Mark. Shape Your Future. You thrive on precision, pace, and purpose. On our Fullerton, CA team, your expertise on CNC lathes helps power beloved brands like DEWALT, CRAFTSMAN, STANLEY, BLACK+DECKER, IRWIN, and LENOX. Join a global crew of 54,000+ across 60 countries championing those who build For Those Who Make The World™. A day in this role On 2nd shift (Mon–Fri, 3:30 pm–12:00 am), you’ll step to your machine and: • Transform engineering drawings into finished parts on Takisawa CNC lathes with FANUC controls., • Validate critical dimensions using calipers, micrometers, and comparators to ensure every feature is in spec., • Capture production and quality results in the company system to keep work flowing smoothly., • Keep equipment clean, organized, and running to department and company standards. What you bring, • 3–5 years operating CNC lathes, ideally on Takisawa platforms., • Hands-on setup experience: workholding selection, tool kitting, touching off tools/setting offsets, interpreting manufacturing drawings, and obtaining first-article approval on FANUC controls., • Use of an offline pre-setter for tool offsets and familiarity with quick-change tooling., • Experience with macro programming and proficiency in Mastercam or other major programming software., • Solid grasp of GD&T and the ability to read/interpret drawing requirements., • Competence with measurement tools (calipers, micrometers, comparators) and shop math., • Ability to lift up to 30 lbs. Compensation & schedule, • Pay Range: $27–$29 (1st shift) & $30.24–$32.48 (2nd shift), • Shift: 2nd shift, Mon–Fri, 3:30 pm–12:00 am, • Quarterly Bonuses, • $3,000 sign on bonus, • Hiring Immediately Benefits you’ll enjoy, • Medical, dental, vision, life, disability, wellness program, 401(k), Employee Stock Purchase Plan, paid time off, and tuition reimbursement., • Exclusive discounts on Stanley Black & Decker tools and partner programs.

Job DescriptionCompany Description John Crane, a business of Smiths Group, is a global leader in mission-critical flow control solutions for energy and process industries that enable efficient and sustainable operations. Our products include mechanical seals and systems, couplings, bearings, filtration systems, and predictive digital monitoring technologies. We have a global network of more than 200 sites in over 50 countries and employ more than 6,000 people worldwide. We partner with our customers to help them keep their operations safe, reduce downtime, improve efficiency, and meet the latest environmental standards. John Crane is part of Smiths Group. For over 170 years, Smiths has been pioneering progress by engineering for a better future. We serve millions of people every year, helping to create a safer, more efficient, productive, and better-connected world across four global markets: energy, security & defence, space & aerospace, and general industrial. Listed on the London Stock Exchange, Smiths employs approximately 16,000 colleagues in over 50 countries. Job Description Under the direction of the Manager, direct, supervise, and coordinate hourly personnel in a production, service, or maintenance department, with CNC machining being the primary area of responsibility, in accordance with company policy and practices, operating schedules, and controls for one or more shifts in more than one area of the plant. • Direct, supervise, and coordinate hourly personnel across production, service, maintenance, and machining areas, with CNC machining as the primary area of responsibility., • Ensure safe, efficient, and high-quality operations in accordance with company policies, operating schedules, and departmental objectives., • Oversee daily shop activities including CNC machining, manual machining, assembly, repair/service, and general production tasks., • Assign work, prioritize tasks, and provide guidance and support to employees throughout the shift., • Maintain strong oversight of CNC operations, including setup practices, tooling needs, machining methods, and issue resolution., • Monitor the use of safety devices, enforce safety protocols, and maintain a clean and hazard-free shop environment., • Participate in hiring, onboarding, training, and development of production and machining associates., • Conduct performance evaluations, recommend wage adjustments, and support employee communications and engagement initiatives., • Collaborate with Production Control, Engineering, and Manufacturing Engineering to support machining schedules, drawings, process changes, and tooling requirements., • Anticipate production or machining problems and implement corrective actions to minimize downtime or schedule interruptions., • Work with vendors and suppliers regarding materials, tooling, equipment, service quality, and delivery schedules., • Investigate accidents, equipment issues, and process inefficiencies; recommend improvements for safety, productivity, and cost savings., • Prepare and maintain accurate production, machining, and efficiency reports in ERP/MRP systems., • Perform additional duties as assigned.Qualifications, • Minimum 5 years of experience in a manufacturing environment, ideally in CNC machining, assembly, repair/service, or production operations, • Minimum 2 years of supervisory or team-lead experience in a shop or manufacturing setting, • Significant hands-on CNC machining experience — CNC is the largest and most critical part of this role., • CNC operation and basic setup, • Tooling knowledge and selection, • Feeds, speeds, and machine controls, • Troubleshooting machining issues, • Experience working in a job-shop or high-mix machining environment., • Experience overseeing or coordinating multiple shop areas (machining, assembly, service/repair, test, production) preferred., • Demonstrated ability to train, coach, and develop hourly associates., • Proficiency with ERP/MRP systems for tracking work orders, labor hours, and machining/production data., • Strong verbal and written communication skills., • Ability to manage competing priorities in a fast-paced, dynamic environment., • Proficiency in Microsoft Office (Word, Excel, PowerPoint, Access, Outlook)., • sit for extend periods of time; a minimum of 2 hours., • maneuver to all areas of the office., • lift up to 35 pounds., • bend, reach, kneel, twist, and grip items while working at assigned desk area., • have the manual dexterity and coordination to operate office equipment Annual salary range: $72,000 – $81,000 USD, depending on experience, CNC depth, and supervisory capability. Additional Information With colleagues stretching across the globe, we are proud of our diversity. To foster inclusivity, we run employee resource groups (ERGs) to provide a safe space for employees to connect and support each other. Our cross-business ERGs include Veterans, Pride Network, Black Employee Network, Women@Work Network, and Neurodiversity. Across our company, we recognize excellence, culminating in the Smiths Excellence Awards, our annual celebration of the most extraordinary activities, people, and projects that best showcase our strengths and help drive our business forward. We announce these on our annual Smiths Day, a global celebration of Smiths around our network. Join us for a great career with competitive compensation and benefits, while helping engineer a better future. We believe that different perspectives and backgrounds are what make a company flourish. All qualified applicants will receive equal consideration for employment regardless of color, religion, sex, sexual orientation, gender identity, national origin, economic status, disability, age, or any other legally protected characteristics. We are proud to be an inclusive company with values grounded in equality and ethics, where we celebrate, support, and embrace diversity. At no time during the hiring process will Smiths Group, nor any of our recruitment partners ever request payment to enable participation – including, but not limited to, interviews or testing. Avoid fraudulent requests by applying jobs directly through our career’s website (Careers - Smiths Group plc)

Job Description CNC Lathe Programmer/ and setup (HAAS ST30), must have own tools. Read and understand blue prints with minimum 5 years experience in aerospace parts. Self reliable. Company DescriptionA&V Engineering, Inc. is a highly experienced designer and manufacturer of high-quality, precision machined parts for the aerospace, communications and defense industries, prototype and production complex machined parts from all types of metal or others materials. Our customers include Boeing, Raytheon, SpaceX and other premier companies.A&V Engineering, Inc. is a highly experienced designer and manufacturer of high-quality, precision machined parts for the aerospace, communications and defense industries, prototype and production complex machined parts from all types of metal or others materials. Our customers include Boeing, Raytheon, SpaceX and other premier companies.

Job DescriptionDescription: Company Background & Summary Votaw Precision Technologies is a trusted leader in the manufacturing of complex precision components, assemblies, and systems for the aerospace, defense, and industrial sectors. With a strong reputation for technical excellence, quality craftsmanship, and on-time delivery, Votaw supports some of the world’s most demanding programs through its advanced manufacturing capabilities. The company specializes in precision machining, fabrication, welding, and complex assembly operations for mission-critical applications. Votaw Precision Technologies is committed to continuous improvement, innovation, and delivering best-in-class solutions to its customers. The position of CNC Programmer is responsible for NC Program design, turning research/customer requirements into technical programs with the use of NC programming software and proprietary design methods specific to Aerospace application. Provide support to all company operations as a manufacturing expert. Essential Functions • Lead discussions with planning department to develop complete manufacturing plans of complex components and assemblies., • Must research best practices and tools for each job, regardless of materials or scope of project. Use abilities to work with tooling vendors and shop personnel to reduce cycle times and increase quality., • Draft and fully dimension drawings in Catia V5 for fixturing, shop aides, repair plans, etc., • Create requests for information to send to customers as needed, • Program highly complex precision parts for VTLs, 5+ axis mills, multi-spindle machines and mill-turns in Catia V5. Mastercam experience is a plus., • Must participate in root cause and corrective actions as an expert problem solver, • Must participate in continuous improvement efforts and general support using your manufacturing experience to assist all departments., • Must be able to provide clear and accurate work instructions. Tool lists and setup sheets must be comprehensive and easy to understand., • Must use Vericut machine simulation for every program generated with an expert level proficiency. Need to be able to fully define tools and setups without assistance., • Must review all customer requirements to ensure CAD models and programs will produce compliant products, • Must mentor and train shop personnel in advanced manufacturing methods with an ability to explain as well as demonstrate ideas in action., • Minimum of 8 years’ experience in an Aerospace / Manufacturing or related industry, • Education: Two years Technical or Trade School with appropriate certification preferred., • Read and comprehend programming instructions, technical manuals, procedure manuals, short correspondence, and memo, • Calculate figures and amounts such as area, circumference, and volume, • Apply concepts of basic algebra, trigonometry, and geometry, • Apply common sense understanding to carry out detailed written or oral instructions, • Problem solving ability with limited information available, • Must be highly proficient in Catia V5, Vericut and ICAM (post processing), • Advanced knowledge of modern machining methods for aerospace alloys, • Knowledge of defining cutting tools, machine strategy, and cutting parameters etc., • Safety glasses required when in manufacturing environment., • Able to communicate effectively with non-technical staff and with members of interdisciplinary teams., • Strong written, oral, and interpersonal communication skills., • Highly self-motivated and directed., • Keen attention to detail., • Proven analytical and problem-solving abilities., • Ability to effectively prioritize and execute tasks in a high-pressure environment., • Hours outside of a normal working day may be required to meet project deadlines or ability to work overtime to support production demand., • Sitting for extended periods of time., • Dexterity of hands and fingers to operate a computer keyboard, mouse, and other devices. This position requires the use of information or access to hardware subject to the International Traffic in Arms Regulations (ITAR). All applicants must be U.S. persons as defined by ITAR. Your actual level and base salary will be determined on a case-by-case basis and may vary based on the following considerations: job-related knowledge, skills, education, and experience. Votaw Precision Technologies, LLC is an Equal Opportunity Employer including Disability/Vets.

Job Description Description – General Machinist The acceptable candidates shall be required to set up and operate lathes and hand equipment with minimal supervision. faces and diameters holding tolerances of between .005" and .0002." Ability to inspect internal and external dimensions using micrometers, gages, and amps. Maintain proper documentation of SPC data and collaborate with management staff and the supervisor. Familiarity with lean manufacturing and continuous improvement techniques is helpful. Overtime is generally required. 1st piece and in-process inspection of the necessary work. Job Requirements:– Set up and operate General Mills, Leaths, and Surface Grinders Essential Job Functions: • Ability to operate machinery as required, • Verify part quantity with the job traveler, • Make machine adjustments as necessary to maintain print specifications, • Load and unload machines as per the cycle time noted on the traveler, • Set up machines, • Determine when wheels need replacement, • Assist in determining tool & fixturing needs, • Use inspection methods to determine size changes, • Understanding blueprints & travelers, • U.S. Citizen or Green Card Required Shift/ Hours: 1st Shift (7am to 4pm) Universal Punch Corp. is an ISO9001 facility that manufactures precision gages, medical driver instruments, splines, shafts, housings & other medical components and assemblies. Additionally, we offer contract gaging and CMM inspection services. Universal Punch Corp. is an Equal Opportunity Employer that provides Equal Employment opportunities within the workplace without regard to race, religion, color, national origin, age, sex, disability, or veteran status. Universal Punch Corp. of Companies offers competitive base pay, health insurance, prescription drug coverage, quarterly-paid bonuses, paid vacation, and more. We take pride in our company culture, which fosters innovation and collaboration. Job Type: Full-time Experience: • United States (Required)Company DescriptionUniversal Punch is a worldwide leader in the contract design and manufacture for Fastener industry, Medical Instruments orthopedic and dental markets. Working in partnership with various businesses including medical device manufacturers around the world, we provide innovative design & development, advanced machining technology, instrument and gage manufacturing.Universal Punch is a worldwide leader in the contract design and manufacture for Fastener industry, Medical Instruments orthopedic and dental markets. Working in partnership with various businesses including medical device manufacturers around the world, we provide innovative design & development, advanced machining technology, instrument and gage manufacturing.

Job Description Wilcox Machine Company, a Los Angeles based machine shop, is seeking an experienced individual to estimate, plan, and manage job shop machine work on individual components and large assemblies. Job duties include project management, and interfacing with customers. Established in 1956, we specialize in CNC and conventional machining of large commercial, aerospace, and government parts and assemblies. Our work ranges from parts weighing a few hundred pounds to over 100,000 pounds. We primarily do prototype and low volume production work. Qualified candidates should have strong blueprint reading, math, and customer interfacing skills. Prior experience estimating and production planning of machined parts and assemblies is highly desired. CAD/CAM (Mastercam) and/or prior machining experience on CNC/Conventional horizontal boring mills, machining centers, lathes, and VTLs is a plus. We offer excellent salary, medical/dental benefits, and a 401K program. Interested candidates should send resume, including employment history via e-mail. Company DescriptionWilcox Machine Company, a well-established machine shop in Los Angeles since 1956, is seeking experienced CNC and conventional machinists to join our team. We specialize in machining large commercial, aerospace, and government parts and assemblies, handling components ranging from a few hundred pounds to over 100,000 pounds. Our focus is on prototype and low-volume production work, and we are currently experiencing high demand with multiple large contracts and ongoing job shop work.Wilcox Machine Company, a well-established machine shop in Los Angeles since 1956, is seeking experienced CNC and conventional machinists to join our team. We specialize in machining large commercial, aerospace, and government parts and assemblies, handling components ranging from a few hundred pounds to over 100,000 pounds. Our focus is on prototype and low-volume production work, and we are currently experiencing high demand with multiple large contracts and ongoing job shop work.

Job DescriptionFull-time Machinist 3TOP Global Aerospace Manufacturer Job Summary We are seeking a highly skilled and experienced Machinist 3 to join our world-class manufacturing team at our state-of-the-art aerospace facility. The ideal candidate will have extensive experience in operating complex machining equipment, including 5-axis machines, gantry systems, and horizontal mills. This role is critical in producing high-precision components for cutting-edge aerospace applications. Key Responsibilities • Operate advanced CNC machinery, including 5-axis machines, gantry systems, and horizontal mills, to manufacture complex aerospace components with extreme precision, • Interpret and follow complex engineering drawings, blueprints, and technical specifications, • Set up machines for various operations, including selecting appropriate tools, fixtures, and work-holding devices, • Program, edit, and optimize CNC machine operations using CAM software and manual programming techniques, • Perform in-process quality checks and measurements using precision measuring instruments, • Troubleshoot and resolve machining issues to maintain production efficiency and quality standards, • Collaborate with engineers, quality control personnel, and other machinists to improve manufacturing processes and implement new technologies, • Maintain detailed records of machining operations, including production data, quality reports, and maintenance logs, • Ensure compliance with all safety regulations, company policies, and industry standards, • Mentor and train junior machinists, sharing knowledge and best practices, • Participate in continuous improvement initiatives to enhance productivity, quality, and cost-effectivenessQualifications, • High school diploma or equivalent; technical school certification or associate's degree in machining or related field preferred, • Minimum of 5 years of experience as a CNC machinist in aerospace or related high-precision manufacturing industry, • Proven expertise in operating 5-axis CNC machines, gantry systems, and horizontal mills, • Proficiency in reading and interpreting complex engineering drawings and geometric dimensioning and tolerancing (GD&T), • Experience with high-performance materials such as titanium, Inconel, and other aerospace alloys, • Strong problem-solving skills and ability to work independently in a fast-paced environment, • Excellent attention to detail and commitment to quality, • Good communication and teamwork skills, • Willingness to work flexible hours, including nights and weekends as requiredTechnical Skills, • 5-Axis Machining: Expert-level proficiency in programming, setting up, and operating 5-axis CNC machines for complex aerospace components, • Gantry Systems: Extensive experience with large-scale gantry machining systems for oversized aerospace parts, • Horizontal Mills: Advanced skills in horizontal machining center operations for precision milling of aerospace components

Job DescriptionCompetitive Salary, OT Offered, Excellent Benefits, 401k and MORE! This Jobot Job is hosted by: Gabriel Ozuna Are you a fit? Easy Apply now by clicking the "Apply Now" buttonand sending us your resume. Salary: $37 - $45 per hour A bit about us: Based in the Bellflower area, we are seeking a Permanent CNC Machinist to join our dynamic team in the Manufacturing industry. This is an exciting opportunity for a highly skilled and experienced professional to work on state-of-the-art machinery and be part of producing top-quality products. The successful candidate will be responsible for setting up and operating CNC machines, inspecting finished products, and ensuring the machinery is maintained to the highest standards. This position requires a minimum of 5 years of experience in a similar role. Why join us? Competitive Salary OT 401k Excellent Medica, Dental and Vision Job Details Responsibilities: • Operate and maintain CNC machines to perform tasks such as drilling, grinding, milling etc., • Understand specifications of the task at hand and the desired result by reading blueprints, mechanical drawings etc., • Translate instructions into computer commands so the machines can perform the correct function., • Prepare and load raw materials and parts onto the machines., • Supervise the machines while they execute the tasks and make any necessary adjustments to produce a better result., • Inspect and measure finished products and compare them with requirements to determine if the process has been completed properly., • Check and maintain machinery daily to ensure functionality., • Troubleshoot and repair machines when needed., • Proven experience as a CNC operator with a minimum of 5 years in a similar role., • Skill in operating CNC machinery and tooling as well as precision measurement tools., • Ability to read and interpret mechanical documents and drawings., • Computer savvy with basic understanding of computer programming and CAD/CAM., • Mechanical aptitude and good math skills., • A keen eye for detail and results-driven approach., • Good communication abilities., • Ability to work in a team and independently., • Ability to stand for long hours and lift heavy loads., • High school diploma or equivalent; certificate or diploma in engineering or relevant discipline is a plus., • Completion of a machinist apprenticeship program or equivalent hands-on experience in a professional setting is preferred. Interested in hearing more? Easy Apply now by clicking the "Apply Now" button. Jobot is an Equal Opportunity Employer. We provide an inclusive work environment that celebrates diversity and all qualified candidates receive consideration for employment without regard to race, color, sex, sexual orientation, gender identity, religion, national origin, age (40 and over), disability, military status, genetic information or any other basis protected by applicable federal, state, or local laws. Jobot also prohibits harassment of applicants or employees based on any of these protected categories. It is Jobot’s policy to comply with all applicable federal, state and local laws respecting consideration of unemployment status in making hiring decisions. Sometimes Jobot is required to perform background checks with your authorization. Jobot will consider qualified candidates with criminal histories in a manner consistent with any applicable federal, state, or local law regarding criminal backgrounds, including but not limited to the Los Angeles Fair Chance Initiative for Hiring and the San Francisco Fair Chance Ordinance. Information collected and processed as part of your Jobot candidate profile, and any job applications, resumes, or other information you choose to submit is subject to Jobot's Privacy Policy, as well as the Jobot California Worker Privacy Notice and Jobot Notice Regarding Automated Employment Decision Tools which are available at jobot.com/legal. By applying for this job, you agree to receive calls, AI-generated calls, text messages, or emails from Jobot, and/or its agents and contracted partners. Frequency varies for text messages. Message and data rates may apply. Carriers are not liable for delayed or undelivered messages. You can reply STOP to cancel and HELP for help. You can access our privacy policy here: jobot.com/privacy-policyCompany DescriptionJobot is on a mission to connect good people with good jobs. By combining AI-powered technology with the expertise of Jobot Pros, our experienced recruiters, we help you find career opportunities that align with your goals and values. Founded in 2018 and employee-owned since 2024, Jobot is committed to fostering a culture of kindness, respect, innovation, and connection. As an industry leader, we’ve been recognized as a top workplace by Forbes, Fortune, USA Today, and Staffing Industry Analysts (SIA). Ready to find a good job? Create your profile today at Jobot.com.Jobot is on a mission to connect good people with good jobs. By combining AI-powered technology with the expertise of Jobot Pros, our experienced recruiters, we help you find career opportunities that align with your goals and values.\r\n\r\nFounded in 2018 and employee-owned since 2024, Jobot is committed to fostering a culture of kindness, respect, innovation, and connection. As an industry leader, we’ve been recognized as a top workplace by Forbes, Fortune, USA Today, and Staffing Industry Analysts (SIA).\r\n\r\nReady to find a good job? Create your profile today at Jobot.com.

Job Description ISCAR METALS, INC., a dynamic and innovative cutting tool company, has an immediate opening for a Technical Applications/Sales Representative for the southern Los Angeles area. Preferred candidates will have a minimum of 3-5 years machining & industrial sales experience and we are always willing to provide sales training to the right individual that has a “can do” attitude. CNC programming experience and a college degree (engineering/industrial focus) is a plus. Like machining? Like optimizing a machine shop process with the best in class cutting tool products? Do you like to compete? If yes, join us in our quest to be #1. Visit us BENEFITS WE OFFER • Competitive Salary, • Health, Dental and Vision plan, • 401K Retirement Plan, • Paid Vacation, Holiday and Sick time, • Life and Disability InsuranceCompany DescriptionCelebrating over 65 years of innovation, Iscar is a full- line ISO9001, ISO14001, ISO18001 and QS9000 certified manufacturer and supplier of precision carbide metalworking tools. As a result of its high quality and original products, this multinational company is a world leader in supplying metal removal products to major industries, including automotive, aerospace, mold and die and a variety of mass production industries. Iscar continues to provide the most economical solutions for the metalworking industry. Iscar is currently represented in over 52 countries worldwide. Iscar's growth continues as a result of innovation and providing its customers with the very latest, most efficient metal cutting technology in the world. Our USA Headquarters, located in Arlington, Texas, houses our national distribution and customer service centers. Our Machining Knowledge Centers, located in Arlington, TX and Charlotte, NC host new tooling technology and specialty seminars and demonstrations throughout the year. Iscar promotes creative thinking and productive teamwork to achieve its business objectives within today’s competitive market place. Come join our team, where innovation never stops, and job satisfaction is our goal. Iscar provides a full compensation package. Iscar Metals is an Equal Employment Opportunity employer, and all qualified applicants will receive consideration for employment without regard to race, color, age, gender, sexual orientation, gender identity, religion, national origin, protected veteran status, disability, genetic information, or any other characteristic protected by law.Celebrating over 65 years of innovation, Iscar is a full- line ISO9001, ISO14001, ISO18001 and QS9000 certified manufacturer and supplier of precision carbide metalworking tools. As a result of its high quality and original products, this multinational company is a world leader in supplying metal removal products to major industries, including automotive, aerospace, mold and die and a variety of mass production industries. Iscar continues to provide the most economical solutions for the metalworking industry. Iscar is currently represented in over 52 countries worldwide.\r\n\r\nIscar's growth continues as a result of innovation and providing its customers with the very latest, most efficient metal cutting technology in the world.\r\n\r\nOur USA Headquarters, located in Arlington, Texas, houses our national distribution and customer service centers. Our Machining Knowledge Centers, located in Arlington, TX and Charlotte, NC host new tooling technology and specialty seminars and demonstrations throughout the year.\r\n\r\nIscar promotes creative thinking and productive teamwork to achieve its business objectives within today’s competitive market place. Come join our team, where innovation never stops, and job satisfaction is our goal. Iscar provides a full compensation package. Iscar Metals is an Equal Employment Opportunity employer, and all qualified applicants will receive consideration for employment without regard to race, color, age, gender, sexual orientation, gender identity, religion, national origin, protected veteran status, disability, genetic information, or any other characteristic protected by law.

Job Description CNC Machinist – Mill (1st Shift) Pay: $23–$26/hr We’re seeking an experienced CNC Machinist to join our team on 1st shift. If you're detail-oriented, mechanically skilled, and passionate about high-precision machining, this is the opportunity for you. Requirements: * Proven CNC mill set-up experience * Hands-on experience with 3- and 4-axis CNC machines * 5-axis experience preferred but not required * Strong understanding of machining with metals such as stainless steel, Inconel, titanium, etc. Qualifications: * Minimum 3 years of CNC machining experience (milling focus) * Ability to read and interpret technical drawings and blueprints * Knowledge of machining best practices and safety procedures * Strong attention to detail and commitment to quality * Ability to work independently and within a team environment If you’re looking to put your skills to work in a dynamic, high-quality shop environment, apply today and become part of a team that values precision, performance, and professionalism. #ff-ov

Job DescriptionDescription: Company Background & Summary Votaw Precision Technologies is a trusted leader in the manufacturing of complex precision components, assemblies, and systems for the aerospace, defense, and industrial sectors. With a strong reputation for technical excellence, quality craftsmanship, and on-time delivery, Votaw supports some of the world’s most demanding programs through its advanced manufacturing capabilities. The company specializes in precision machining, fabrication, welding, and complex assembly operations for mission-critical applications. Votaw Precision Technologies is committed to continuous improvement, innovation, and delivering best-in-class solutions to its customers. We are seeking a highly motivated and experienced HBM/ VM (Horizontal Boring Mill/ Vertical Mill) Machinist to join our growing team. This position will play a crucial role in the success of our large-scale machined, end-item projects by being responsible and fully accountable for the successful execution and customer satisfaction. The ideal candidate will possess a strong background in complex machined components and flight hardware, with a thorough understanding of space-flight structures, proficiency in interpreting technical drawings, blueprints, and schematics with a keen eye for detail. This role requires a process-oriented individual with excellent communication skills and a desire to contribute to a growing company. Previous machining and manufacturing experience in a similar job shop environment is a significant asset. This role is responsible for the operation, set-up & utilization of Horizontal & Vertical milling machines as well as other processes used. Essential Functions • Inspect manufactured components for conformance to specifications, • Ability to set up and operate Vertical and Horizontal CNC Milling Machine centers, including but not limited to 3-4 axis, • Support for programming, ensuring proper use of programs & tools, • Ability to work from travelers, blueprints, set up sheets, drawings and/or verbal instructions as well as limited judgment and experience to plan and accomplish goals., • Able to use appropriate measuring devices, such as calipers, micrometers, height gages, plug gages, etc., • Demonstrate a willingness to cross-train and support the development of other employees as needed. Including actively supporting cross-training initiatives to ensure team flexibility and shared knowledge for operational continuity., • Maintain a clean work area daily as required., • Able to understand complex machining theory and strategy, • Ability to manage and prioritize a high number of set-ups and short-run jobs, • Able to understand and interrogate complex mechanical drawings and tolerances, • Ability to use common machine shop hand and measurement tools, • Ability to set-up and run multiple CNC Machines in a fast-paced environment, • Fixture design, fabrication, and manual machining experience is a plus, • Ability to read, write and speak effectively in English, • Understand and follow Geometric Dimensioning and Tolerance standard (GD&T), • Strong math skills required, • Aerospace manufacturing experience: 10 yrs. minimum experience, • Prior experience in an aerospace prototype/ job shop environment preferred, • Self-motivation, able to accomplish a high level of work, • Team player, actively participating in continuous improvement projects with coworkers., • Demonstrate high skill level with the desire for continuous learning, • Safety glasses required when in manufacturing environment., • Proven analytical and problem-solving abilities., • Ability to effectively prioritize and execute tasks in a high-pressure environment., • Strong interpersonal and oral communication skills., • Ability to work with limited supervision including using sound judgment to execute independent decisions and departmental initiatives., • Adept at reading, writing, and interpreting technical documentation and procedure manuals., • Highly self-motivated and directed., • Keen attention to detail., • Skilled at working within a team-oriented, collaborative environment., • 40+ hours onsite work week., • Sitting for extended periods of time. This position requires the use of information or access to hardware subject to the International Traffic in Arms Regulations (ITAR). All applicants must be U.S. persons as defined by ITAR. Your actual level and base salary will be determined on a case-by-case basis and may vary based on the following considerations: job-related knowledge, skills, education, and experience. Votaw Precision Technologies, LLC is an Equal Opportunity Employer including Disability/Vets.

Job Description Overall Purpose: The Sr. CNC Programmer is responsible to write and prove new and existing programs to ensure dimensionally correct machined components. They will need to interpret both drawings as well as 3d models to produce machine instruction and tool selection to ensure both machine efficiency and accuracy. Essential Duties & Responsibilities: • Program CNC Machines utilizing Mastercam for both Mills and Lathes, • Review incoming job orders and prepare programs per revision, • The ability to work with machinists to produce efficient and accurate programs with existing equipment, • Perform file maintenance, • Perform First Article Inspection, including molds and segment inspection as required, • Enter SPC jobs into the computer, • Collect SPC data on the computer, • Send and retrieve programs from the main computer, • Complete daily paperwork, • Ability to set-up mills and lathes, • Perform complete inspection of parts, • Read blue prints, • Crosstrain in other areas as needed, • Clean work areas, • Follow both verbal and written instructions, • Adhere to 5S Standards · Other duties based on the needs of the Machine Shop The preceding functions have been provided as examples of the types of work performed by employees assigned to this job classification. Management reserves the right to add, modify, change or rescind work assignments and to make reasonable accommodations as needed. Qualification Requirements: • High School education or equivalent, • Must possess basic computer skills, • Minimum 10 years of CNC programming experience, • Must be capable of programming using Master Cam Mill / Okuma Lathe, • Must be familiar with Okuma lathes, HAAS milling machines and Daewoo/Fanuc Control, • Ability to program 5th axis Milling, • Strong understanding of GD&T, • Must be capable of performing duties and responsibilities with minimum supervision, • Able to read and understand blue prints, • Knowledge of basic measuring tools, calipers, micrometers, comparators and math required, • Fluent in English (able to read, speak, write and understand) o Perform repetitive motions o Regularly lift 15+ pounds Must be US Persons based on ITAR definition (US Citizen or Permanent Resident).* This position is expected to be exposed to information which is subject to US export control regulations, i.e. the International Traffic in Arms Regulations (ITAR) or the Export Administration Regulations (EAR). All Applicants must be U.S. persons within the meaning of U.S. regulations. Hydraflow provides equal employment opportunities to all employees and applicants for employment and prohibits discrimination and harassment of any type without regard because of any one, or combination of any one or more protected characteristics including race, color, religion, creed, age, sex, gender, gender identity, gender expression, pregnancy, medical condition, genetic information, sexual orientation, national origin or ancestry, citizenship, marital status, physical or mental disability, military or veteran status, victims as well as those who have a family member that is a victim of any qualifying act of violence, those who are perceived to have a combination of protected characteristics or are perceived as being associated with a person who has these characteristics or any other basis protected by law This policy applies to all terms and conditions of employment, including recruiting, hiring, placement, promotion, termination, layoff, recall, transfer, leaves of absence, compensation and training. Company DescriptionHydraflow provides fluid transfer solutions that reduce customer's installation time, waste, weight and life-cycle costs. In addition we couple our highly innovative and differentiated products with a culture of service and quality, giving our customer the competitive advantage to succeed in their business.Hydraflow provides fluid transfer solutions that reduce customer's installation time, waste, weight and life-cycle costs. In addition we couple our highly innovative and differentiated products with a culture of service and quality, giving our customer the competitive advantage to succeed in their business.

Job Description Essential Duties This is an exciting opportunity for an individual to join our Company training program and work in all areas of the organization, including manufacturing, engineering, quality, purchasing, sales, and CNC programming. Responsibilities will include manufacturing, design, continuous improvement hands on projects. Provide daily manufacturing support and guidance for their respective product line. Participation and driving overall financial performance improvements for their respective product line area of responsibility. The individual may travel to our Southern California facilities for additional experience and training. Your growth and success is unlimited as we are an engineering driven company. Qualifications Require a Bachelor’s degree in Mechanical Engineering or related field. Must have demonstrated experience with Solidworks and Microsoft Office Products. Must be able to communicate with all levels of the organization; both verbally and in writing. We’re looking for someone with a great attitude and a desire to learn about all aspects of a Manufacturing Company. MIN/MAX: $75k to$75K **Please note that the salary range information is only applicable to California. This range is the company's good faith and reasonable estimate of the compensation for this role based on the position's responsibilities, qualifications, experience, and other relevant factors. Actual compensation may vary depending on the selected candidate's specific experience, education, skills, and other relevant factors. Equal Opportunity Employer Industrial Tectonics Bearings is an equal opportunity employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, gender, sexual orientation, gender identity, national origin, disability, or veteran status. This role is subject to compliance with the International Traffic in Arms Regulations (ITAR) and the Export Administration Regulations (EAR), which requires the incumbent to be either a US citizen, lawful permanent resident [“green card” holders] or have refugee or asylee status.

Job DescriptionDescription: Hadco Metal Trading Co., LLC distributes and supplies metal products including aluminum, stainless steel, carbon, related alloys, and engineering plastics for general engineering, aerospace, and commercial markets. Our range of precision cutting equipment includes CNC, water jets, band saws, plate saws, and shears. Hadco branches are located strategically in Arizona, California, Connecticut, Florida, Georgia, Kansas, New York, New Hampshire, North & South Carolina, Oklahoma, Oregon, Philadelphia-US Corporate Headquarters, Texas, Washington, with transfer stations located throughout the East, Midwest and West allowing a nationwide presence and coverage with next day delivery capability. We are looking for an experienced Inside Sales Specialist with a solid understanding of the engineering grade plastics or metals industry to join our sales team in Santa Fe Springs, CA. Why become a member of the Hadco Sales Team? • You will be a valued & respected member of our team, • You will be supported by the best in the plastics & metals industry, • Work with a technologically advanced and growing distribution company Develop new prospects build business from inquiries, outbound calls, aged leads, internet sites, and other sources. Provide best-in-class service with existing customers to identify leads and increase the sales of engineering-grade plastic products and services. Work with outside sales representatives to build and maintain account activity. Manage inventory by analyzing reports, forecasting usage & negotiating pricing. Work closely with department head to strategize & formulate plans for growth. Requirements: Minimum Requirements: • Thorough knowledge & understanding of engineering plastic materials or metals industry., • Previous experience in direct customer interaction in a sales capacity., • Capability to use critical thinking during the decision-making process., • Highly developed organizational & communication skills., • Base compensation and commission, • Medical, dental, and vison insurance, • 401K with company match, • Generous PTO and holidays

Job DescriptionDescription: Job Title: 5-Axis CNC Programmer Location: Santa Fe Springs, Ca Company: PMD INC About Us: PMD INC is a leading aerospace manufacturing company specializing in precision aircraft parts. We pride ourselves on innovation, precision, and quality, delivering top-notch solutions to our clients worldwide. We are seeking an experienced 5-Axis CNC Programmer to join our dynamic team and contribute to our continued success. Job Summary: As a 5-Axis CNC Programmer with 10 years of experience, you will be responsible for programming, setting up, and operating 5-axis CNC machines to produce high-precision parts. Your expertise in interpreting technical drawings, developing efficient machining processes, and ensuring the highest quality standards will be crucial in maintaining our reputation for excellence. Please note that this is an on-site position. Key Responsibilities: • Develop, write, and optimize CNC programs for 5-axis machining centers to produce complex components., • Set up and operate 5-axis CNC machines, including tool selection, fixture setup, and part alignment., • Interpret engineering drawings, specifications, and CAD models to determine machining requirements., • Conduct test runs and first article inspections to validate program accuracy and part conformity., • Troubleshoot and resolve machining issues, ensuring minimal downtime and maintaining production schedules., • Collaborate with engineers, designers, and production teams to improve processes and implement design changes., • Utilize CAM software to create efficient and effective tool paths., • Adhere to safety protocols and maintain a clean and organized work environment., • Minimum of 5 years of experience as a CNC programmer, with at least 5 years specializing in 5-axis machining (aerospace preferred), • Proficiency in CAD/CAM software (Mastercam and Catia preferred)., • Certificate or associate degree in CNC programming, machining, or a related technical field (or Bachelor’s degree in engineering), • Strong understanding of G-code, M-code, and CNC programming principles., • Extensive experience with various materials, including metals, plastics, and composites., • Excellent problem-solving skills and attention to detail., • Ability to read and interpret complex engineering drawings and blueprints., • Solid knowledge of tooling and fixturing techniques for 5-axis machining., • Strong mathematical skills and understanding of geometric dimensioning and tolerancing (GD&T)., • Excellent communication and teamwork abilities., • Experience with Kitamura, Mori Seki, Fadal, and Fanuc Controls., • Familiarity with industry-specific standards and quality assurance procedures. · Must be a U.S. Person as defined by ITAR (U.S. Citizen, U.S. Permanent Resident, or protected individual under 8 U.S.C. 1324b(a)(3)). · Responsible for safeguarding export-controlled technical data in compliance with ITAR and company procedures. · Completion of ITAR compliance training and strict adherence to export control protocols required. What We Offer: • Competitive salary and benefits package. Salary Range $80,000-$120,000 based on experience., • Opportunities for professional development and career advancement., • A collaborative and supportive work environment., • Cutting-edge technology and state-of-the-art facilities. Requirements: Physical Requirements (Essential Job Functions): • Ability to sit at a workstation or desk for extended periods while programming CNC machines., • Ability to stand and move about a machine shop environment for extended periods during program prove-out, setup, and troubleshooting., • Ability to lift, carry, push, or pull materials, parts, or tooling up to 25 pounds on a regular basis, and occasionally up to 50 pounds, with or without reasonable accommodation., • Ability to bend, reach, kneel, and use hands and fingers to handle tools, parts, or computer equipment., • Ability to visually inspect machined parts and tooling with or without corrective lenses., • Ability to hear machine sounds, alarms, and shop communication with or without hearing aids or reasonable accommodation., • Tolerance to work in a manufacturing environment that may include moderate noise, oil/coolant mist, and varying temperatures.

Job Description Hourly Pay Range: $37.25-$41.00 All Applicants must comply with ITAR Requirements. US Citizens or Permanent Residents only Summary: Reporting to the Head of Machining Operations, the Machinist III is responsible for operating manual and CNC machine tools, including 5-axis gantry mills, vertical and horizontal milling centers, horizontal and vertical turning centers, etc. in support of production and development machining. Critical thinking and collaboration are required to evaluate and resolve unique equipment and product issues in a demanding production environment. Core Responsibilities: • All functions of a Machinist II, • Communicate with other departments to keep product flowing, • Ensure the personnel and equipment are available to achieve the safety, quality, and productivity standards of the workcenter, • Proper selection of tools per application, • Apply understanding of CAM programs including but not limited to: Mastercam, Fusion 360, • Apply advanced understanding of probe cycles and functions, • Read and interpret customer and internal drawings related to checking parts, • Inspect 1st article parts that do not require CMM, GOM, VeriSerf layout Additional Responsibilities: • Other duties as assigned Qualifications: • Must be able to comply with ITAR and EAR residency requirements, • Demonstrated knowledge of machining procedures and practices, • Experience in using and/or programming manual, semi-automated or automated tools and machines (lathes, grinders etc.), • Proven track record of operating safe facilities., • High school diploma or equivalent, • A minimum of 5 years of experience in a manufacturing environment operating CNC mills and lathes. Required: • All skills required of a Machinist II, • Effective communication techniques for collaboration with other departments, • Methods for ensuring personnel and equipment are available to achieve the safety, quality, and productivity standards of the workcenter, • Demonstrate proper selection of tools per application, • Understanding of CAM programs including but not limited to: Mastercam, Fusion 360, • Advanced understanding of probe cycles and functions, • Ability to read and interpret customer and internal drawings related to checking parts, • Inspect 1st article parts that don't require CMM, GOM, VeriSerf layout

Job Description Are you passionate about design and fascinated by crafting top-tier custom industrial machinery and automation systems? Join our team of engineers dedicated to delivering excellence to our esteemed clientele! Responsibilities: • Develop intricate part and assembly models using SolidWorks 3D CAD, • Design components to meet manufacturing specifications, including sheet plastic routing, fusion welding, sheet metal bending, waterjet cutting, CNC machining, and more, • Create and refine production engineering drawings (assemblies, components, layouts) ensuring timely delivery within budget, • Collaborate closely with production teams, aligning designs with fabrication and assembly processes for efficient manufacturing, • Generate and manage bills of materials for mechanical assemblies, • Maintain meticulous organization of CAD files using SolidWorks Product Data Management system for file storage, revisions, and lifecycle management, • Actively engage in Design Reviews to optimize design concepts, • Conduct thorough checks on drawings prepared by Engineers and other Designers to ensure compliance with design standards and best practices Requirements Qualifications: • CAD certification or a two-year technical AA degree, • 5 years of work experience, • Proficiency in SolidWorks CAD and PDM at an advanced level, • Demonstrated portfolio showcasing strong 3D modeling skills, • Excellent verbal and written communication abilities, • Self-motivated, accountable, and committed to continual improvement, • Proficiency in Plan and Elevation system views using AutoCAD Mechanical, • Experience in piping systems design and Piping and Instrumentation Diagrams (P&IDs), • Administration expertise in Product Data Management systems, • Advanced proficiency in SolidWorks design modules (frames, routing, sheet metal, large assemblies), • Structural analysis familiarity using SolidWorks Simulation FEA, • Understanding of Geometric Dimensioning and Tolerancing as per ANSI Y14.5 Competitive Salary, Medical, Dental, and Vision, 401K, Paid Time Off and Paid Holidays

Job DescriptionDescription: Summary Votaw Precision Technologies is a trusted leader in the manufacturing of complex precision components, assemblies, and systems for the aerospace, defense, and industrial sectors. With a strong reputation for technical excellence, quality craftsmanship, and on-time delivery, Votaw supports some of the world’s most demanding programs through its advanced manufacturing capabilities. The company specializes in precision machining, fabrication, welding, and complex assembly operations for mission-critical applications. Votaw Precision Technologies is committed to continuous improvement, innovation, and delivering best-in-class solutions to its customers. The position of Machinist-VTL is responsible for the operation, set-up & utilization of all vertical turning lathes (VTL) as assigned to machine parts. Essential Functions 1. Inspect manufactured components for conformance to specifications, 2. Ability to set up and operate vertical turning lathes (VTL), 3. Support for programming, ensuring proper use of programs & tools, 4. Ability to work from travelers, blueprints, set up sheets, drawings and/or verbal instructions as well as limited judgment and experience to plan and accomplish goals., 5. Able to use appropriate measuring devices, such as calipers, micrometers, height gages, plug gages, etc. • Able to understand complex machining theory and strategy., • Ability to manage and prioritize a high number of set-ups and short run jobs, • Able to understand and interrogate complex mechanical drawings and tolerances, • Technical Degree or equivalency is preferred, • Ability to use common machine shop hand and measurement tools., • Ability to set-up and run multiple CNC Machines in a fast-paced environment., • Fixture design, fabrication, and manual machining experience is a plus., • Understand and follow Geometric Dimensioning and Tolerance standard (GD&T)., • Strong math skills required., • Aerospace experience a plus. 5 yrs. minimum experience, 10+ yrs. preferred), • Self-motivation, able to accomplish high level of work., • Team player, actively participating in continuous improvement projects with coworkers., • Demonstrate high skill level with the desire for continuous learning., • Experience working in AS9100 and ISO environment, • Ability to troubleshoot and edit programs., • Safety glasses required when in manufacturing environment., • Able to communicate effectively with non-technical staff and with members of interdisciplinary teams., • Strong written, oral, and interpersonal communication skills., • Highly self-motivated and directed., • Keen attention to detail., • Proven analytical and problem-solving abilities., • Ability to effectively prioritize and execute tasks in a high-pressure environment., • Hours outside of a normal working day may be required to meet project deadlines or ability to work overtime to support production demand., • Sitting for extended periods of time., • Dexterity of hands and fingers to operate a computer keyboard, mouse, and other devices. This position requires the use of information or access to hardware subject to the International Traffic in Arms Regulations (ITAR). All applicants must be U.S. persons as defined by ITAR. Your actual level and base salary will be determined on a case-by-case basis and may vary based on the following considerations: job-related knowledge, skills, education, and experience. Votaw Precision Technologies, LLC is an Equal Opportunity Employer including Disability/Vets.

Job DescriptionProduction Manager - CNC/ToolingJob Summary:The Manager, CNC & Tooling supervises the CNC & Tooling departments, ensuring efficient production and quality control. Technical skills with CNC equipment, programming, manufacturing software, and experience in Lean Manufacturing and process improvement is required. This hands-on leadership role is responsible for driving production efficiency, quality, and team performance while reducing waste and optimizing workflows.Key Responsibilities:Leadership & SupervisionLead, schedule, and supervise CNC machinists and programmers.Train and mentor team members on best practices in CNC machining and Lean principles.Foster a culture of accountability, safety, and continuous learning. Technical OversightProgram and troubleshoot CNC machines (mills, lathes, routers, etc.).Review and validate G-code, CAM toolpaths, and CAD/CAM files.Oversee tooling selection, setup optimization, and CNC process development.Maintain and improve CNC equipment reliability and performance. Production & Process ManagementManage shop floor workflow to meet or exceed production targets.Identify and eliminate production bottlenecks using Lean tools (e.g., 5S, Kaizen, Value Stream Mapping).Analyze operational data to implement standard work practices and drive efficiency through data analysis. Continuous Improvement & Lean ManufacturingLead, contribute, and support initiatives to reduce waste, streamlining cycle times, and improving product quality.Apply Lean Manufacturing methodologies, including 5S, SMED, Kanban, and root cause analysis (RCA).Collaborate with cross-functional teams to develop and implement process improvements and cost reduction measures. Quality ControlMeet all specs, tolerances, and quality standards.Collaborate with QA and possibly Engineering to resolve non-conformances and set corrective actions.Oversee inspections and improve quality systems. Software & SystemsUse CNC programming software (Mastercam, Fusion 360, Solid CAM) for efficient and accurate programming.Work within ERP/MRP systems for scheduling, inventory, and work orders.Track machine utilization, downtime, and performance.Education/ExperienceEducation and ExperienceBachelor’s degree in mechanical engineering, Manufacturing, related discipline, or equivalent certifications, practical experience.Minimum of 10 years of hands-on CNC machining/programming, preferably in the Aerospace and Defense industry.Minimum 5 years’ experience in a people management role. Leadership and accountability are a must in this role.Proficiency in G-code, CAM software, and CNC machine setup.Experience with multi-axis CNC machines and controllers (Fanuc, Haas, Siemens, etc.).Experience with interpreting blueprints and GD&T.Background in Lean Manufacturing or Six Sigma methodologies.Experience working in regulated industries such as aerospace, medical devices, or automotive.Proficiency in automation processes, including robotic loading and probing.Knowledge of CNC program optimization. Soft Skills:Leadership and team-building skills.Effective communication and organizational abilities.Strong analytical and problem-solving skills with a focus on continuous improvement. We may use artificial intelligence (AI) tools to support parts of the hiring process, such as reviewing applications, analyzing resumes, or assessing responses. These tools assist our recruitment team but do not replace human judgment. Final hiring decisions are ultimately made by humans. If you would like more information about how your data is processed, please contact us.

Job Description We’re hiring a CNC Programmer to join our fabrication team. This role is key to ensuring precision machining and supporting efficient production. You’ll work closely with engineering, lead tooling development, support machine operators, and ensure quality through first-article inspections and setup accuracy. Key Responsibilities: Program and set up CNC machines (Turrets, Laser, Panel Bender, Safan) Collaborate with engineering on prototypes and tooling Perform first article inspections and tool adjustments Assist with troubleshooting and train machine operators Support fabrication manager with equipment decisions and tool sourcing Maintain safety and IMS standards; control scrap and material yield Requirements: 3+ years CNC programming experience in manufacturing High school diploma and CNC certification Proficient in blueprint reading, CAD/CAM software, and inspection tools Strong problem-solving and communication skills Must be able to work on-site; occasional weekends may be required Temp – to- Hire Montebello, CA Monday -Friday 4am-12:30 with OT as needed. $35-$37 an hour Please contact me , Adriana, at or call me at 562-285-5512 for more information or if interested. Company DescriptionKelly helps companies recruit and manage skilled workers and helps job seekers find great work in industries such as accounting and finance, education, engineering, government, manufacturing and production, technology, and more. Since inventing the staffing industry in 1946, we’ve become experts in the many specialties and local and global markets we serve. With a network of suppliers and partners around the world, we connect 450,000+ people with work every year. We ensure companies have the people they need, when and where they’re needed most. Kelly is committed to providing equal employment opportunities to all qualified employees and applicants regardless of race, color, sex, sexual orientation, gender identity, religion, national origin, disability, veteran status, age, marital status, pregnancy, genetic information, or any other legally protected status, and we take affirmative action to recruit, employ, and advance qualified individuals with disabilities and protected veterans in the workforce. Requests for accommodation related to our application process can be directed to the Kelly Human Resource Knowledge Center. Kelly complies with the requirements of California’s state and local Fair Chance laws. A conviction does not automatically bar individuals from employment. Kelly participates in E-Verify and will provide the federal government with your Form I-9 information to confirm that you are authorized to work in the U.S.Kelly helps companies recruit and manage skilled workers and helps job seekers find great work in industries such as accounting and finance, education, engineering, government, manufacturing and production, technology, and more.\r\n\r\nSince inventing the staffing industry in 1946, we’ve become experts in the many specialties and local and global markets we serve. With a network of suppliers and partners around the world, we connect 450,000+ people with work every year. We ensure companies have the people they need, when and where they’re needed most.\r\n\r\nKelly is committed to providing equal employment opportunities to all qualified employees and applicants regardless of race, color, sex, sexual orientation, gender identity, religion, national origin, disability, veteran status, age, marital status, pregnancy, genetic information, or any other legally protected status, and we take affirmative action to recruit, employ, and advance qualified individuals with disabilities and protected veterans in the workforce. Requests for accommodation related to our application process can be directed to the Kelly Human Resource Knowledge Center. Kelly complies with the requirements of California’s state and local Fair Chance laws. A conviction does not automatically bar individuals from employment. Kelly participates in E-Verify and will provide the federal government with your Form I-9 information to confirm that you are authorized to work in the U.S.

Job Description Senior Software Manager Location: Rancho Dominguez, CA (Onsite) Salary Range: $175,000 – $225,000, depending on experience Company: TRAK Machine Tools Website: About Us TRAK Machine Tools, a division of Southwestern Industries, is a leader in CNC controls for the toolroom market. Founded in 1951, we design and manufacture CNC machines and controls at our facilities in Rancho Dominguez, CA, and Henderson, NV. Our products are known for innovation, user-friendly interfaces, and reliability. Learn more at . The Opportunity We are seeking a Senior Software Manager to lead a talented team of 3–4 developers and 2 software testers. This is a hands-on leadership role responsible not only for team management and technical direction, but also for directly contributing to the codebase. The ideal candidate combines strong software development experience with a passion for building and mentoring high-performing engineering teams. Key Responsibilities • Leadership & Architecture, • Provide day-to-day leadership and technical guidance for the software team, • Design and document software architecture for current and future CNC control products, • Develop protocols for inter-process communication and system integration, • Identify and address weaknesses in system architecture to improve stability and scalability, • Software Development, • Write and maintain code for user interfaces, toolpath algorithms, and CNC features, • Implement enhancements and fix bugs in existing codebases, • Contribute to PLC programming for machine functions, • Stay current with relevant technologies and bring new ideas to the team, • Oversee development efforts for our new subscription based products, • Drive integration of third-party software into the ProtoTRAK platform, supporting a subscription-based model managed through the cloud, • Testing & Support Tools, • Review our current automated testing methods and provide guidance or suggestions for improvement, • Help develop or refine automated regression testing tools as needed, • Create internal tools to support troubleshooting and diagnostics on CNC machines Required Qualifications • BS or MS in Computer Science, Electrical Engineering, Mechanical Engineering, or related field, • 10+ years of professional software development experience in C and C++, • Prior experience managing or mentoring a small software team, • Strong understanding of the Windows operating system and Win32 architecture, • Experience working in Agile/Scrum environments, • Excellent communication skills and ability to collaborate across engineering and management teams, • Ability to stand and work in the machine shop for long hours for initial training and to verify the operation of the software on the machines Preferred Qualifications • Familiarity with CAD/CAM software, • Experience developing software for PC-based machine control systems, • Background in CNC machine tools or industrial automation, • Experience or background in motion control systems, • Knowledge of PLC programming, • Knowledge of cloud-based software platforms and subscription management, • Ability to assess existing software architecture in Win32 and recommend strategies for migrating to a more modern programming language with minimal multi-year redevelopment Why Join Us? At TRAK Machine Tools, you’ll work on cutting-edge CNC control systems that have a real-world impact in manufacturing. You'll join a collaborative engineering environment where your ideas and leadership can shape the future of our products. We offer: • Health, life, and disability insurance, • Paid vacation and vacation bonus, • 401(k) plan with company match

Job Description **Innovation | Learning & Growth | Latest Technology ** Located in Cerritos, CA, the operation is taking the creation of products to the next level through engineering innovation. For nearly 30 years, their state-of-the-art technology serves premier technology companies around the globe. An elite team of about 100 employees work on a variety of machines including mills, lathes, mill turn, and grinders to manufacture precision equipment for their customers. With new machines recently installed, and more on the way, they are dedicated to keeping up with the latest, state-of-the-art technology. This is an opportunity to leverage your current lathe experience to influence business operations. You will help coach and mentor other machinists while staying hands on machines performnig setup and operation in addition to coordinating and executing department funtions. This is a 1st shift position 6 AM - 2:30 PM on Monday- Friday. The goal is to maintain a strong work-life balance. Benefits for the role include: • PTO, • Holidays, • Medical/Dental/Vision, • 401k Schedule jobs/machines * Ensure safety standards are met * Coach current and future machinists * Design tooling and fixtures * Ensure work completion and on time delivery * Set up and operate CNC lathes and/or grinders * Program lathe machines at the machine and on Esprit as needed * Edit programs at the machine * Perform first article and in process inspections Qualifications: * Experience setting up and operating lathes * Experience programming CNC lathe (Esprit preferred) * Knowledge of Mori Seiki and or DMG lathes is a great plus * Ability to edit programs at the machine * Understanding of blueprints, drawings, and models * Knowledge of inspection tools such as calipers, micrometers, gauges etc. AMC is an Equal Opportunity employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex including sexual orientation and gender identity, national origin, disability, protected Veteran Status, or any other characteristic protected by applicable federal, state, or local law. “In accordance with California law, the expected salary range for this California position is between $30/hr and $45/hr. The actual compensation will be determined based on experience and other factors permitted by law.” You should be proficient in: • Leadership / People Management, • CNC Tooling, • CNC Programming, • Coaching and Mentoring Experience, • CNC Machine Setup & Changeover, • CNC Mill (3-4 axis VMC) (Doosan, Haas, Okuma, Fanuc), • CNC Lathe (2-4 axis) (Haas, Okuma, Doosan, Dmg Mori Seiki), • CNC Swiss Lathe (Star, Citizen, Tsugami), • CNC Grinder (Okuma, Okamoto, Studer), • CNC Lathe (5+ axis) (Okuma, Doosan, Dmg Mori Seiki)

Job DescriptionDescription: Company Background & Summary Votaw Precision Technologies is a trusted leader in the manufacturing of complex precision components, assemblies, and systems for the aerospace, defense, and industrial sectors. With a strong reputation for technical excellence, quality craftsmanship, and on-time delivery, Votaw supports some of the world’s most demanding programs through its advanced manufacturing capabilities. The company specializes in precision machining, fabrication, welding, and complex assembly operations for mission-critical applications. Votaw Precision Technologies is committed to continuous improvement, innovation, and delivering best-in-class solutions to its customers. We are seeking a highly motivated and experienced 4/5 Axis Machinist to join our growing team. This position will play a crucial role in the success of our large-scale machined, end-item projects by being responsible and fully accountable for the successful execution and customer satisfaction. The ideal candidate will possess a strong background in complex machined components and flight hardware, with a thorough understanding of space-flight structures, proficiency in interpreting technical drawings, blueprints, and schematics with a keen eye for detail. This role requires a process-oriented individual with excellent communication skills and a desire to contribute to a growing company. Previous machining and manufacturing experience in a similar job shop environment is a significant asset. This role is responsible for the operation, set-up & utilization of the 4/5-Axis milling machines as well as other processes used. Essential Functions • Inspect manufactured components for conformance to specifications, • Ability to set up and operate CNC Milling Machines, including but not limited to 4 and 5-Axis, • Support for programming, ensuring proper use of programs & tools, • Ability to work from travelers, blueprints, set up sheets, drawings, and/or verbal instructions as well as limited judgment and experience to plan and accomplish goals., • Able to use appropriate measuring devices, such as calipers, micrometers, height gages, plug gages, etc., • Able to understand complex machining theory and strategy, • Ability to manage and prioritize a high number of set-ups and short-run jobs, • Able to understand and interrogate complex mechanical drawings and tolerances, • Ability to use common machine shop hand and measurement tools, • Ability to set-up and run multiple CNC Machines in a fast-paced environment, • Fixture design, fabrication, and manual machining experience is a plus, • Ability to read, write and speak effectively in English, • Understand and follow Geometric Dimensioning and Tolerance standard (GD&T), • Strong math skills required, • Aerospace manufacturing experience: 10 yrs. minimum experience, • Prior experience in an aerospace prototype/ job shop environment preferred, • Self-motivation, able to accomplish a high level of work, • Team player, actively participating in continuous improvement projects with coworkers., • Demonstrate high skill level with the desire for continuous learning, • Safety glasses required when in manufacturing environment., • Proven analytical and problem-solving abilities., • Ability to effectively prioritize and execute tasks in a high-pressure environment., • Strong interpersonal and oral communication skills., • Ability to work with limited supervision including using sound judgment to execute independent decisions and departmental initiatives., • Adept at reading, writing, and interpreting technical documentation and procedure manuals., • Highly self-motivated and directed., • Keen attention to detail., • Skilled at working within a team-oriented, collaborative environment., • 40+ hours onsite work week., • Sitting for extended periods of time. This position requires the use of information or access to hardware subject to the International Traffic in Arms Regulations (ITAR). All applicants must be U.S. persons as defined by ITAR. Your actual level and base salary will be determined on a case-by-case basis and may vary based on the following considerations: job-related knowledge, skills, education, and experience. Votaw Precision Technologies, LLC is an Equal Opportunity Employer including Disability/Vets.

Job DescriptionDescription: Company Background & Summary Votaw Precision Technologies is a trusted leader in the manufacturing of complex precision components, assemblies, and systems for the aerospace, defense, and industrial sectors. With a strong reputation for technical excellence, quality craftsmanship, and on-time delivery, Votaw supports some of the world’s most demanding programs through its advanced manufacturing capabilities. The company specializes in precision machining, fabrication, welding, and complex assembly operations for mission-critical applications. Votaw Precision Technologies is committed to continuous improvement, innovation, and delivering best-in-class solutions to its customers. We are seeking a highly motivated and experienced HBM/ VM (Horizontal Boring Mill/ Vertical Mill) Machinist to join our growing team. This position will play a crucial role in the success of our large-scale machined, end-item projects by being responsible and fully accountable for the successful execution and customer satisfaction. The ideal candidate will possess a strong background in complex machined components and flight hardware, with a thorough understanding of space-flight structures, proficiency in interpreting technical drawings, blueprints, and schematics with a keen eye for detail. This role requires a process-oriented individual with excellent communication skills and a desire to contribute to a growing company. Previous machining and manufacturing experience in a similar job shop environment is a significant asset. This role is responsible for the operation, set-up & utilization of Horizontal & Vertical milling machines as well as other processes used. Essential Functions • Inspect manufactured components for conformance to specifications, • Ability to set up and operate Vertical and Horizontal CNC Milling Machine centers, including but not limited to 3-4 axis, • Support for programming, ensuring proper use of programs & tools, • Ability to work from travelers, blueprints, set up sheets, drawings and/or verbal instructions as well as limited judgment and experience to plan and accomplish goals., • Able to use appropriate measuring devices, such as calipers, micrometers, height gages, plug gages, etc., • Demonstrate a willingness to cross-train and support the development of other employees as needed. Including actively supporting cross-training initiatives to ensure team flexibility and shared knowledge for operational continuity., • Maintain a clean work area daily as required., • Able to understand complex machining theory and strategy, • Ability to manage and prioritize a high number of set-ups and short-run jobs, • Able to understand and interrogate complex mechanical drawings and tolerances, • Ability to use common machine shop hand and measurement tools, • Ability to set-up and run multiple CNC Machines in a fast-paced environment, • Fixture design, fabrication, and manual machining experience is a plus, • Ability to read, write and speak effectively in English, • Understand and follow Geometric Dimensioning and Tolerance standard (GD&T), • Strong math skills required, • Aerospace manufacturing experience: 10 yrs. minimum experience, • Prior experience in an aerospace prototype/ job shop environment preferred, • Self-motivation, able to accomplish a high level of work, • Team player, actively participating in continuous improvement projects with coworkers., • Demonstrate high skill level with the desire for continuous learning, • Safety glasses required when in manufacturing environment., • Proven analytical and problem-solving abilities., • Ability to effectively prioritize and execute tasks in a high-pressure environment., • Strong interpersonal and oral communication skills., • Ability to work with limited supervision including using sound judgment to execute independent decisions and departmental initiatives., • Adept at reading, writing, and interpreting technical documentation and procedure manuals., • Highly self-motivated and directed., • Keen attention to detail., • Skilled at working within a team-oriented, collaborative environment., • 40+ hours onsite work week., • Sitting for extended periods of time. This position requires the use of information or access to hardware subject to the International Traffic in Arms Regulations (ITAR). All applicants must be U.S. persons as defined by ITAR. Your actual level and base salary will be determined on a case-by-case basis and may vary based on the following considerations: job-related knowledge, skills, education, and experience. Votaw Precision Technologies, LLC is an Equal Opportunity Employer including Disability/Vets.

Job Description Established in 1919, RBC Bearings specializes in producing technical and regulated bearing products and components that demand advanced design, testing, and manufacturing capabilities. As a full manufacturing division, we manage the entire product lifecycle—from initial engineering and design through sales, supply chain management, and final production—ensuring quality and innovation at every stage. This comprehensive approach allows us to deliver highly technical solutions tailored to the diversified industrial, aerospace, and defense markets. RBC Bearings operates 56 facilities worldwide, including 37 manufacturing sites across ten countries. The company’s market capitalization is approximately $6.2 billion. With a skilled team integrated across all functions, we consistently deliver complex parts from concept through completion. Job Title/Location Machinist – Santa Fe Springs, CA Under general supervision, manages the CNC Lathe function of machining metal parts to print specifications. Performs required machine set-up and quality audits through the use of precision measuring instruments and special test equipment. Monitors/performs workflow in order to meet customer demands and production control requirements. The duties and responsibilities include, but are not limited to, the following: Run multiple lathes (2"-24") Setup Monitors the machining of metal parts to print specifications. Adjust programs Perform Offsets Performs self inspection plus the required quality audits through the use of precision measuring instruments and special test equipment. Performs production according to assigned priorities and communicates deviations to appropriate personnel. Collaborate with leads to monitor/augment departmental performance and makes adjustments to equipment and workload as needed. Ensures that all required materials are available prior to initiating production. Communicates open issues to alternate shifts. Provides mentoring as required to achieve increased skills for production and quality workmanship. Performs daily prior-to-use equipment maintenance tasks. Participates in daily 6S activities and adheres to all safety regulations. Participates in development of Job Safety Analysis. Must be willing to work overtime as needed. Essential Qualifications, Skills and Experience: High School Diploma, Equivalency, or GED. Demonstrated successful performance of manual adjustment of programming at machine interface. Ability to complete set-ups using 4th axis, with multiple offsets. 2 or more years’ experience in the operations of a CNC Lathe. Knowledge of tooling and precision set-ups with consistent quality results. Knowledge of precision measuring instruments. Knowledge of machinery speeds and feeds utilizing a variety of high strength materials. Ability to fluently read and follow instructions in English. Must read, understand, refer to and interpret Geometric, Dimensioning and Tolerancing (GD&T) dimensioning and third view projection blueprints. Ability to interpret prints and engineering drawings. Ability to perform machining on a variety of high strength materials (Inconel, A286, Titanium, Stainless, Chrome, 300M, 15-5, etc). Beneficial Qualifications, Skills and Experience: Experience in an Aerospace manufacturing environment preferred. Bilingual - English and Spanish MIN/MAX: $22 to $24 **Please note that the salary range information is only applicable to California. This range is the company's good faith and reasonable estimate of the compensation for this role based on the position's responsibilities, qualifications, experience, and other relevant factors. Actual compensation may vary depending on the selected candidate's specific experience, education, skills, and other relevant factors. Equal Opportunity Employer RBC Lubron Bearing Systems is an equal opportunity employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, gender, sexual orientation, gender identity, national origin, disability, or veteran status. This role is subject to compliance with the International Traffic in Arms Regulations (ITAR) and the Export Administration Regulations (EAR), which requires the incumbent to be either a US citizen, lawful permanent resident [“green card” holders] or have refugee or asylee status.

Job DescriptionDescription: Company Background & Summary Votaw Precision Technologies is a trusted leader in the manufacturing of complex precision components, assemblies, and systems for the aerospace, defense, and industrial sectors. With a strong reputation for technical excellence, quality craftsmanship, and on-time delivery, Votaw supports some of the world’s most demanding programs through its advanced manufacturing capabilities. The company specializes in precision machining, fabrication, welding, and complex assembly operations for mission-critical applications. Votaw Precision Technologies is committed to continuous improvement, innovation, and delivering best-in-class solutions to its customers. We are seeking a highly motivated and experienced 4/5 Axis Machinist to join our growing team. This position will play a crucial role in the success of our large-scale machined, end-item projects by being responsible and fully accountable for the successful execution and customer satisfaction. The ideal candidate will possess a strong background in complex machined components and flight hardware, with a thorough understanding of space-flight structures, proficiency in interpreting technical drawings, blueprints, and schematics with a keen eye for detail. This role requires a process-oriented individual with excellent communication skills and a desire to contribute to a growing company. Previous machining and manufacturing experience in a similar job shop environment is a significant asset. This role is responsible for the operation, set-up & utilization of the 4/5-Axis milling machines as well as other processes used. Essential Functions • Inspect manufactured components for conformance to specifications, • Ability to set up and operate CNC Milling Machines, including but not limited to 4 and 5-Axis, • Support for programming, ensuring proper use of programs & tools, • Ability to work from travelers, blueprints, set up sheets, drawings, and/or verbal instructions as well as limited judgment and experience to plan and accomplish goals., • Able to use appropriate measuring devices, such as calipers, micrometers, height gages, plug gages, etc., • Able to understand complex machining theory and strategy, • Ability to manage and prioritize a high number of set-ups and short-run jobs, • Able to understand and interrogate complex mechanical drawings and tolerances, • Ability to use common machine shop hand and measurement tools, • Ability to set-up and run multiple CNC Machines in a fast-paced environment, • Fixture design, fabrication, and manual machining experience is a plus, • Ability to read, write and speak effectively in English, • Understand and follow Geometric Dimensioning and Tolerance standard (GD&T), • Strong math skills required, • Aerospace manufacturing experience: 10 yrs. minimum experience, • Prior experience in an aerospace prototype/ job shop environment preferred, • Self-motivation, able to accomplish a high level of work, • Team player, actively participating in continuous improvement projects with coworkers., • Demonstrate high skill level with the desire for continuous learning, • Safety glasses required when in manufacturing environment., • Proven analytical and problem-solving abilities., • Ability to effectively prioritize and execute tasks in a high-pressure environment., • Strong interpersonal and oral communication skills., • Ability to work with limited supervision including using sound judgment to execute independent decisions and departmental initiatives., • Adept at reading, writing, and interpreting technical documentation and procedure manuals., • Highly self-motivated and directed., • Keen attention to detail., • Skilled at working within a team-oriented, collaborative environment., • 40+ hours onsite work week., • Sitting for extended periods of time. This position requires the use of information or access to hardware subject to the International Traffic in Arms Regulations (ITAR). All applicants must be U.S. persons as defined by ITAR. Your actual level and base salary will be determined on a case-by-case basis and may vary based on the following considerations: job-related knowledge, skills, education, and experience. Votaw Precision Technologies, LLC is an Equal Opportunity Employer including Disability/Vets.

Job DescriptionTop Job Located in Montebello, CA Salary: $20.00 - $25.00 Entry Level CNC Machinist $20.00 - $25.00 / DOE 6:00 AM - 2:30 PM / Monday-Friday A pipeline maintenance company is seeking an Entry Level CNC Machinist to assist the CNC team in a hands-on learning role. The position involves loading parts into machines, learning machining operations and safety procedures, and supporting daily shop activities. This role provides experience with CNC machining while using shop equipment such as sit-down forklifts, small cranes, and power tools. You are applying through Express Employment Professionals, an award-winning Staffing Firm. Entry Level CNC Machinist Responsibilities: • Assist the CNC Machinist by loading parts into machines, • Learn CNC machining operations and safety procedures, • Perform in-process inspections to ensure quality standards, • Assist with basic machine setup and maintenance, • Provide general shop support as needed, • Operate sit-down forklifts and small cranes to move materials and equipment, • Must have 1 year of experience with CNC machining, • Hands-on mechanical aptitude, • Basic blueprint reading skills preferred, • Ability to operate or learn to operate sit-down forklifts and small cranes, • Comfortable using power tools safely, • Ability to follow safety protocols in an industrial environment, • Weekly pay and immediate benefits, • Evaluation-to-hire positions - get your foot in the door with great company, • Personalized job matching and interview preparation, • No fees for job seekers #2937 Express Office: Montebello 1433 North Montebello Boulevard Montebello, CA 90640

Job DescriptionA very well known Tortilla Manufacturing Company in the Inland Empire is Machinist. Be part of a Great Company, and Apply Now! Position Tittle: General Machinist II - Mill Working Hours: 6 AM to 2:30 PM (OT as Needed) Working Days: Monday - Friday (Saturday's as Needed) Pay Rate: $22/Hr. to $28/Hr. (DOE) Position Description:Requirements: • Read and interpret engineering drawings, blueprints, charts and tables or study sample parts, • Work to dimensions and tolerances provided by blueprints, • Set up, operate and maintain a variety of machine tools including computer numerically controlled (CNC) tools to perform precision, • Fit and assemble machined metal parts and subassemblies using hand and power tools, • Verify dimensions of products for accuracy and conformance to specifications using precision measuring instruments, • Align and secure holding fixtures, cutting tools, attachments, accessories, and materials onto machines, • Monitor the feed and speed of machines during the machining process, • Edit programs as needed / Write short programs as needed, • Observe and listen to operating machines or equipment to diagnose machine malfunctions and to determine needs for adjustments or repairs, • Separate scrap waste and related materials for reuse, recycling, or disposalQualifications:, • High school diploma or equivalent required, • One year of machine shop experience required, • Completion of a technical trade school, or the equivalent of education and experience, or trade certification for general Machinist is preferred, • Ability to complete a technical trade school apprentice program within four years is required, • Ability to use measuring devices to verify that work meets blueprint specifications, • Basic shop math skills including knowledge of arithmetic, algebra, geometry, trigonometry and their application is required, • Able to edit programs

EOE Statement We are an equal employment opportunity employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, national origin, disability status, protected veteran status or any other characteristic protected by law. About the Organization Hydraflow provides fluid transfer solutions that reduce customer's installation time, waste, weight and life-cycle costs. In addition we couple our highly innovative and differentiated products with a culture of service and quality, giving our customer the competitive advantage to succeed in their business. Category Manufacturing Description Overall Purpose: The CNC Machinist A produces machined parts by programming, setting up, and operating a CNC machine while adhering to quality and safety standards. Essential Duties & Responsibilities: • Set up and program CNC machines, • Make tooling and fixtures as required, • Perform file maintenance, • Perform First Article Inspection, including molds and segment inspection as required, • Enter SPC jobs into the computer, • Collect SPC data on the computer, • Print and close out jobs, • Send and retrieve programs from the main computer, • Complete daily paperwork, • Perform set-up with tools provided, • Perform complete inspection of parts, • Properly complete dimensional inspection reports, • Properly operate CNC machine to ensure productivity standards are met, • Read blue prints, • Properly document labor report, job travelers and other daily reports in a timely manner, • Crosstrain in other areas as needed, • Clean work areas, • Follow both verbal and written instructions, • Adhere to 5S Standards Position Requirements Qualification Requirements: • High School education or equivalent, • Must possess basic computer skills, • Minimum 5 years of CNC experience, • Must be capable of programming using Master Cam Mill /Okuma Lathe, • Must be familiar with Okuma lathes, HAAS milling machines and Daewoo/Fanuc Control, • Must be capable of performing duties and responsibilities with minimum supervision, • Able to read and understand blue prints, • Knowledge of basic measuring tools, calipers, micrometers, comparators and math required, • Fluent in English (able to read, speak, write and understand), • While performing duties of the job, the employee is required to:, • Regularly stand, walk, and reach with both hands and arms, • Perform repetitive motions, • Regularly lift 10+ pounds Must be US Persons based on ITAR definition (US Citizen or Permanent Resident).* This position is expected to be exposed to information which is subject to US export control regulations, i.e. the International Traffic in Arms Regulations (ITAR) or the Export Administration Regulations (EAR). All Applicants must be U.S. persons within the meaning of U.S. regulations. To perform this job successfully, an individual must be able to perform each essential duty satisfactorily. The requirements listed above are representative of the knowledge, skill and/or ability required. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. Hydraflow provides equal employment opportunities to all employees and applicants for employment and prohibits discrimination and harassment of any type without regard because of any one, or combination of any one or more protected characteristics including race, color, religion, creed, age, sex, gender, gender identity, gender expression, pregnancy, medical condition, genetic information, sexual orientation, national origin or ancestry, citizenship, marital status, physical or mental disability, military or veteran status, victims as well as those who have a family member that is a victim of any qualifying act of violence, those who are perceived to have a combination of protected characteristics or are perceived as being associated with a person who has these characteristics or any other basis protected by law This policy applies to all terms and conditions of employment, including recruiting, hiring, placement, promotion, termination, layoff, recall, transfer, leaves of absence, compensation and training. This role starts at $34-36/hr based on experience Number of Openings 1 Exempt/Non-Exempt Non-Exempt Full-Time/Part-Time Full-Time Shift Days This position is currently accepting applications.

Job Description Machine Operator - 1st shift Pay Range: $19 - $24 Specialty door manufacturer located in Pico Rivera is hiring CNC Laser Operators for their 2nd shift. • Monday - Friday, • 1st shift - 6am - 2:30pm, • Set-up CNC Machine(s) (change nozzles, breakaway insulators, load programs), • Operate CNC Machine(s), • Move & place sheet metal on/off machine using forklift, • Check parts to ensure they conform to drawings, • Read & interpret job packets, • Perform basic preventive maintenance, • Troubleshoot and perform minor maintenance, • Raise machine issues to supervisors/managers, • Recent machine operating experience & set up a plus, • Count with fabrication or assembly experience, • Ability to lift up to 50 lbs, • Knowledgeable with hand / power tools, • Comfortable working in a shop environment

CNC Lathe Machinist III Full-Time | Onsite Rancho Dominguez, CA $24.00 – $32.40 per hour About TRAK Machine Tools (TMT) TRAK Machine Tools (TMT) is a leading manufacturer of TRAK CNC machines and ProtoTRAK CNC controls, trusted by machinists worldwide. Headquartered in Rancho Dominguez, CA, with an additional facility in Henderson, NV, TMT supports customers through direct and distributor sales and service organizations across America and Europe, with continued global expansion. Position Overview TRAK Machine Tools is seeking a highly skilled CNC Lathe Machinist III to join our advanced machine shop team. This senior-level role is designed for an expert machinist who can independently manage jobs from programming through final inspection, machine high-precision components to ±0.0001", and provide technical leadership to junior machinists. You’ll work on proprietary TRAK equipment and Mazak CNC machines, collaborate closely with engineering, and play a key role in process improvement and quality excellence. Key Responsibilities Program, set up, and operate CNC lathes for production and prototype work Develop CNC programs and perform complex, multi-step setups Design and fabricate custom fixtures, jaws, and workholding solutions Machine high-precision components to ±0.0001" tolerances Perform first-article inspections and in-process adjustments Train, mentor, and support CNC Machinist Levels I & II Partner with engineering on design-for-manufacturability (DFM) feedback Recommend and implement improvements in tooling, processes, and methods Independently manage assigned jobs from start to finish Create and maintain digital job folders, including setup, operation, and inspection documentation Maintain a clean, organized, and safety-focused work environment Qualifications & Experience 8+ years of CNC machining experience, including advanced programming and setups Proficiency with CAM software and/or conversational controls Siemens Sinumerik (including Sinumerik One) ProtoTRAK Mazak Strong knowledge of cutting tools, feeds/speeds, materials, and precision workholding Expert ability to read and interpret engineering drawings and GD&T Demonstrated success machining to ±0.0001" tolerances Proven leadership, mentoring, and communication skills Ability to independently troubleshoot and resolve machining challenges Experience in prototype and low-volume production environments Hands-on experience machining aluminum, cast iron, and various steels Familiarity with lean manufacturing or continuous improvement initiatives Why Join TMT? Work with industry-leading CNC technology Take on a true senior machinist role with leadership impact Collaborate with engineering on innovative, precision-driven projects Stable, growing company with global reach Competitive hourly pay and a professional, quality-focused shop environment

Job Description Gosiger - Okuma Distributor POSITION SUMMARY: Position is responsible for performing troubleshooting, problem solving, preventative maintenance, service, and repair of machine tools at customer site and on company facility. Incumbent performs all job functions in a high quality, efficient and timely manner. Incumbent works as a member of a team and assists team members as required. Makes recommendations to supervisor on process improvements to ensure customer satisfaction. ESSENTIAL RESPONSIBILITIES: • Performs troubleshooting and problem solving of CNC Machine Tools., • Performs high quality, efficient and timely machine/tooling installation as assigned., • Performs high quality, efficient and timely repair and preventative maintenance as assigned., • Ensures high quality levels/standards in all work performed and follows all safety procedures and requirements., • Trains and instructs customers, and internal team members, on proper installation, service/repair procedures for current & new equipment/machines and processes., • Using Service software, accurately documents all actions and findings, completes, and reports parts required and repair. Reporting is required same day, and at the maximum within 24 hours., • Consults with other team members, internal departments and/or external vendors to resolve issues related to installation and service/repair., • Continuously reviews current processes and searches out improvement methods. Recommends modifications and improvements to machine/equipment, processes, and procedures., • Communicates as needed to our customers including notification of arrival, progress updates, and checking out upon leaving the customer site., • Progressive development of skills should be cultivated through further education, seminars, company training and other external resources such as reading material., • Responsible for the cleanliness, care, and upkeep of all company property., • Based on business need, assists, supports and/or performs other job functions within department or other work areas within scope and ability. ESSENTIAL REQUIREMENTS: • Associates Degree or certification in the troubleshooting, repair, and installation of CNC Machine Tool Products., • Minimum 2 years experience in the troubleshooting, installation, and repair of Machine Tools Products., • A valid Drivers License, a good driving record, and the ability to “legally” operate a company “Service” vehicle or personal vehicle for company business. (You may be required to drive your personal vehicle for business until a company vehicle is assigned)., • Good interpersonal communication skills. Ability to maintain professional conduct when dealing with customers, peers, builder representatives and suppliers., • Demonstrated self-starter and effective planning and organization skills., • Ability to participate as a member of a team, crossing department and divisional lines., • Ability to use PC and job-related software/programs for programming, documentation/record keeping., • Physical demands: continuous bending, stooping, standing, climbing, step stool climbing, lifting to 50lbs, lifting greater than 50lbs with assistance, pushing and pulling., • Willing to work flexible hours, including weekends and evening hours as required by customer., • Must be able to travel in support of training, out-of-state or out-of-country customers, and assist other divisions as required to support business demand. Ability to obtain and maintain a valid Passport., • Ability to obtain a major credit card i.e., American Express, Visa, or Master Card, based on your own personal credit history to utilize for business expenses and occasional travel requirements. Working Conditions: Work uniforms are company provided. Manufacturing work environment which includes moving mechanical machine parts, potentially loud equipment, with exposure to a variety of non-hazardous and hazardous chemicals and airborne particles. Hands on work with machine tool equipment. LCD viewing and key entry. Internal/external customer communications with vendor and supplier contact. Employee requirement to utilize Gosiger and customer safety guidelines and procedures. #ZR

Overview CNC MACHINIST* (2nd SHIFT ONLY, Mon.-Fri. 2 PM - 10:30 PM)+ overtime, including Saturdays Salary Range: $21.00 - $35.00* + $2.00 shift premium for 2nd shift. *Pay and job title will depend on skill level and experience. WHO WE ARE: Snap-on continually strives to be an employe of choice and offers a GREAT PLACE TO WORK. City of Industry's average seniority is 15 years! People know Snap-on for the quality of our products, but we know that it is the passion and character of our people that make our company a global leader. With our diverse talents and deep pride in the Snap-on family of brands, we drive innovation and create value. We work hard together. We grow together. We are one Snap-on team. WORKING WITH SNAP-ON HAS BENEFITS! \n • Medical, dental, and vision may start one month from date of hire.\n\n, • Medical Options: Aetna Health Fund, PPO, EPO; Kaiser HMO\n, • Dental Options: Aetna Basic Plan & High Option Plan\n, • Vision plan through Vision Service Plan (VSP)\n\n, • Vacation - start earning at an annual 2-week rate from day one. Earned vacation may be used after 30 days of employment.\n, • Ten (10) paid holidays + up to 2 additional floating holidays (FH) per calendar year. You choose when you want to take these 2 additional FH each year.\n, • Up to six (6) paid sick days per year. May be taken after 90 days of employment. \n, • Other possible incentives depending on position and level.\n, • Basic life, basic accidental death, and dismemberment coverage.\n, • Employee Stock Purchase Plan - annual optional enrollment period.\n, • 401(k) Plan with matching employer contributions (50% on the first 6%)\n, • Short term and long-term disability.\n, • Snap-on offers a 50% discount for tools and merchandise.\n, • Discounts for other various services and items such as phone services, computers, hotels, travel, auto rentals and more.\n, • Employee Assistance Program that includes Mental Health Counseling, Life Coaching and Legal/Financial Resources for employees and immediate family members. \n, • Other health education programs include smoking cessation, and seasonal flu shots.\n, • Education Assistance for qualified associates at $5,250/annually\n Responsible for performing production and manufacturing operations to meet daily production requirements. \n • Maintain a safe work environment by following safety procedures and actively contributing to workplace safety initiatives.\n, • Set up and operate CNC lathe and mill machines using existing programs and tooling, from minor setup through full operation.\n, • Manufacture parts and tools using various materials, primarily aluminum and steel.\n, • Monitor machinery and inspect in-process and finished products to ensure compliance with quality standards and production requirements.\n, • Make machine offsets and equipment adjustments as necessary.\n, • Work effectively both independently and within a team-oriented environment.\n, • Meet or exceed Quality Key Performance Indicators (KPIs) supporting safety, compliance, Six Sigma quality, on-time delivery (OTD), and financial objectives.\n, • Provide backup support and assistance to other department personnel as needed.\n, • Perform basic daily machine maintenance and housekeeping as required.\n\n WHAT YOU BRING TO THE TEAM. REQUIRED SKILLS & EXPERIENCE \n • Minimum of one year of hands-on experience operating CNC lathe and mill machines.\n, • \nHigh school diploma or equivalent, with relevant experience and/or formal technical training.\n, • Ability to comply with safety standards and procedures in a manufacturing environment.\n, • Proficient in interpreting blueprints, specifications, and related documentation to ensure products meet required standards.\n, • Ability to edit and adjust existing CNC programs.\n, • Strong hands-on problem-solving skills to identify production issues and implement effective solutions.\n, • Experience with quality inspection and metrology, including calipers, micrometers, gauges, dial indicators, and visual inspection methods.\n, • Ability to read and understand blueprints, routings, and shop aids.\n, • Strong mathematical aptitude and problem-solving skills.\n, • \nEffective communication skills and basic computer literacy.\n, • Ability to multitask, prioritize, and adapt in a fast-paced manufacturing environment while making timely decisions.\n, • Ability to perform repetitive tasks on a daily basis with consistency and accuracy.\n, • Strong organizational skills with attention to detail and accuracy.\n, • Basic computer knowledge.\n, • Willingness to work overtime, including Saturdays, up to 20 hours per week as needed.\n

Responsibilities Howmet Fastening Systems (HFS) is seeking a CNC Operator V for the Fullerton, CA site. HFS is a business unit of Howmet Aerospace, headquartered in Torrance, California. We hold the number one global position in aerospace fastening systems, and we're the North American leader in commercial transportation fasteners. Our high-tech, multi-material fastening systems are found nose to tail on aircraft and aerospace engines. Our products are also critical components of industrial gas turbines, automobiles, commercial transportation vehicles, and construction and industrial equipment. Requires the setup, operation and troubleshooting of CNC controlled machine tools to perform any sequence of programmed operation using programs and tool layouts provided. Essential Duties and Responsibilities \n • Selects and sets proper tooling as identified on tool layout to correspond with program. \n, • Makes set-ups by using typical tooling fixtures and indicating target diameters, hole alignments, or spindle run-out.\n, • Programs, loads and proves out program and runs and self-inspects first article samples. Adjusts set-up as necessary to conform to dimensions and tolerances.\n, • Completes as directed all necessary documentation for each set-up. Such as S.P.C. charts, set-up checklist, first article verification, etc.\n, • Run, monitor and troubleshoot equipment in production, adjusting set-up as necessary.\n, • Monitor tool life and dimensional characteristics of product. Replenish tooling as directed. \n, • Monitor process using S.P.C. techniques.\n, • Performs routine preventive maintenance procedures on equipment. Assists maintenance in troubleshooting equipment by applying knowledge of individual machine characteristics.\n, • Reads blueprints and has the knowledge to use micrometers, calipers, comparators, thread gauges, depth micrometers and dial indicators as needed.\n, • Keeps work area clean, safe and in an orderly fashion on a daily basis.\n, • Performs other tasks of equal or lesser skill as required.\n\n Qualifications Basic Qualifications \n • Minimum of five years related experience and/or training in machine shop operation running a variety of machine shop equipment including CNC equipment; or equivalent combination of education and experience.\n, • Able to read/interpret part drawings, use quality tools (calipers, mics, comparators) \n, • Ability to read and understand manufacturers drawings, catalogs, and other written or verbal instructions. \n, • Ability to add, subtract, multiply, and divide in all units of measure, using whole numbers, common fractions, and decimals. Ability to compute rate, ratio, and percent and to draw and interpret bar graphs.\n, • Employees must be legally authorized to work in the United States. Verification of employment eligibility will be required at the time of hire. Visa sponsorship is not available for this position.\n\n Physical Demands: \n • Must be able to lift/move 30 lbs. (may not exceed per EHS policies) \n, • Must be able to stand for long periods of time \n\n Preferred Qualifications: \n • Ability to apply common sense understanding to carry out instructions furnished in written, oral, or diagram form. \n, • Ability to deal with problems involving several concrete variables in standardized situations.\n, • Fastener/aerospace manufacturing experience\n, • High school diploma or GED \n\n Benefits/Salary: The position includes competitive wages and a comprehensive benefits package available day one of hire, including health insurance (medical, dental, vision), excellent 401k matching program, paid holidays and vacation. Howmet Aerospace curates a strong working environment through opportunities for career progression, community engagement activities, and flexible schedules contingent upon role and location. The salary range for this position is $27.32 to $46.45. About Us Howmet Aerospace Inc. (NYSE: HWM), headquartered in Pittsburgh, Pennsylvania, is a leading global provider of advanced engineered solutions for the aerospace and transportation industries. Our primary businesses focus on jet engine components, aerospace fastening systems, titanium structural parts and forged wheels. With $7.4 Billion in revenue in 2024, our products play a crucial role in enabling fuel efficiency and lightweighting, contributing to our customers' success and making a positive impact on the world. To learn more about the way Howmet Aerospace Inc. is advancing the sustainability of our customers, markets, and communities where we operate, review the 2024 Environmental Social and Governance report at . Follow: LinkedIn, Twitter, Instagram, Facebook, and YouTube. Equal Opportunity Employer: Howmet is proud to be an Equal Employment Opportunity employer. We are committed to creating an inclusive environment for all employees. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability, status as a protected veteran, or other applicable legally protected characteristics. If you need assistance to complete your application due to a disability, please email [email protected] About the Team Howmet fastening systems are the premier aerospace and industrial fasteners, latches, bearings, fluid fittings and installation tools. Our products are used nose to tail on commercial and military defense aircraft, as well as on jet engines, automobiles, commercial transportation vehicles, wind turbines, solar power systems, and construction and industrial equipment.

ABOUT US Orchid Orthopedic Solutions is world leading Medical Device Contract Design and Manufacturing company that offers a comprehensive portfolio of services for implants and instruments with significant experience in the joint reconstruction, spine, trauma, dental and sports medicine markets. This site focuses primarily on Swiss style turning for the trauma, spine and dental markets. We are also FDA registered and ISO 13485 certified. A career with Orchid provides training and growth opportunities, great benefits, including quarterly bonuses, insurance, 401(k) with company match, paid time off and employee engagement events. For more information, please visit ___. SHIFT SNA - Shift 3 (15%) (United States of America - California) A BRIEF OVERVIEW The CNC Machinist I position contributes to the production of medical devices by operating and performing basic set ups of CNC 2 and 3 Axis machines, with the ability to identify X, Y, Z and 0 coordinates. He/she is responsible for running multiple and varying CNC machines simultaneously, such as Lathes, EDM Wire, and Plunge machines in addition to operating manual machine tools to cut, drill, shape, and finish quality products with some supervision. Experience with CNC Machining in a manufacturing work environment required. WHAT YOU WILL DO • The Machinist, CNC reports directly to the area Supervisor., • Performs basic machining functions to produce parts., • Operates multiple machines simultaneously., • Monitors the machine to ensure proper program performance., • Completes shop work orders, inspection documentation, and daily maintenance sheets., • Makes off sets and adjustments to machines with moderate supervision., • Advocates for the health and safety of self, co-workers, customers, and the community., • Support quality and compliance by adhering to all procedures, work instructions, and forms per the Quality Management Systems (QMS)., • Completes all required training. EDUCATION QUALIFICATIONS • High School Or Equivalent (Preferred) EXPERIENCE QUALIFICATIONS • Lean Manufacturing Experience (Preferred), • Experience in Medical Device Manufacturing (Preferred), • 1+ Years of Experience Operating Machining Equipment in a Manufacturing Environment (Preferred) LICENSES AND CERTIFICATIONS • Machining Trade School (Preferred) KNOWLEDGE & SKILLS THAT ENABLE SUCCESS • Problem Solving - Working Experience, • Machine Set Up - Working Experience, • Visual Quality Assurance - Working Experience, • GD&T - Working Experience, • Blueprint Reading - Working Experience, • Information Processing - Basic Knowledge, • Quality Inspection Metrology Tools - Working Experience, • Accuracy and Attention to Detail - Working Experience, • Handwriting - Basic Knowledge, • Data Entry - Working Experience, • Mathematical Ability - Basic Knowledge PHYSICAL DEMANDS • Must be able to remain in a stationary position - Frequently, • Must be able to move about the inside of the building - Occasionally, • Must be able to move equipment around the building - Occasionally, • Must be able to position oneself and move under/around/over equipment - Occasionally, • Must be able to handle/adjust/inspect/position various items and equipment - Constantly, • Must be able to communicate and exchange information with others - Frequently, • Must be able to perform tasks that require repetitive handling/adjusting/inspecting/positioning of items and equipment - Constantly, • Must be able to distinguish and detect information such as writing and defects - Frequently WORKING CONDITIONS • Noise - Frequently PAY RATE For positions located in California, pay for this job type falls within the following range and varies based on scope and complexity of job responsibilities: $17.26 - $23.00 per hour. As this position is assigned to the 3rd Shift, a 15% premium is added to the base hourly pay rate for all hours worked during that shift. WHAT WE OFFER • Opportunity to work in a growing company, • Ability to help people live a longer, more active life, • Comprehensive benefit package, • Ability to work in an organization that values:, • Integrity First: We do the right thing, • Teamwork: We are one Orchid, • Results: Our results matter ADDITIONAL REQUIREMENTS • Candidates offered employment may be required to submit to a pre-employment background check and pre-employment drug-screening based on position requirements, • Applicants must be authorized to work for ANY employer in the U.S. We are unable to sponsor or take over sponsorship of an employment Visa at this time, • Candidates must be able to provide proof of eligibility to work in the United States through eVerify At Orchid, we fully support a diverse and inclusive workplace and we are an equal opportunity employer. All qualified applicants will receive consideration for employment without regard to, among other things, race, color, religion, sex, sexual orientation, gender identity, national origin, hair type, age, status as a protected veteran, or disability. Orchid Orthopedic Solutions only pays fees for solicited presentations of job seekers submitted through our preferred vendor job board by recruiters, employment agencies, or other parties.

ABOUT US Orchid Orthopedic Solutions is world leading Medical Device Contract Design and Manufacturing company that offers a comprehensive portfolio of services for implants and instruments with significant experience in the joint reconstruction, spine, trauma, dental and sports medicine markets. This site focuses primarily on Swiss style turning for the trauma, spine and dental markets. We are also FDA registered and ISO 13485 certified. A career with Orchid provides training and growth opportunities, great benefits, including quarterly bonuses, insurance, 401(k) with company match, paid time off and employee engagement events. For more information, please visit ___. SHIFT SNA - Shift 2 (10%) (United States of America - California) A BRIEF OVERVIEW The CNC Machinist I position contributes to the production of medical devices by operating and performing basic set ups of CNC 2 and 3 Axis machines, with the ability to identify X, Y, Z and 0 coordinates. He/she is responsible for running multiple and varying CNC machines simultaneously, such as Lathes, EDM Wire, and Plunge machines in addition to operating manual machine tools to cut, drill, shape, and finish quality products with some supervision. Experience with CNC Machining in a manufacturing work environment required. WHAT YOU WILL DO • The Machinist, CNC reports directly to the area Supervisor., • Performs basic machining functions to produce parts., • Operates multiple machines simultaneously., • Monitors the machine to ensure proper program performance., • Completes shop work orders, inspection documentation, and daily maintenance sheets., • Makes off sets and adjustments to machines with moderate supervision., • Advocates for the health and safety of self, co-workers, customers, and the community., • Support quality and compliance by adhering to all procedures, work instructions, and forms per the Quality Management Systems (QMS)., • Completes all required training. EDUCATION QUALIFICATIONS • High School Or Equivalent (Preferred) EXPERIENCE QUALIFICATIONS • Lean Manufacturing Experience (Preferred), • Experience in Medical Device Manufacturing (Preferred), • 1+ Years of Experience Operating Machining Equipment in a Manufacturing Environment (Preferred) LICENSES AND CERTIFICATIONS • Machining Trade School (Preferred) KNOWLEDGE & SKILLS THAT ENABLE SUCCESS • Problem Solving - Working Experience, • Machine Set Up - Working Experience, • Visual Quality Assurance - Working Experience, • GD&T - Working Experience, • Blueprint Reading - Working Experience, • Information Processing - Basic Knowledge, • Quality Inspection Metrology Tools - Working Experience, • Accuracy and Attention to Detail - Working Experience, • Handwriting - Basic Knowledge, • Data Entry - Working Experience, • Mathematical Ability - Basic Knowledge PHYSICAL DEMANDS • Must be able to remain in a stationary position - Frequently, • Must be able to move about the inside of the building - Occasionally, • Must be able to move equipment around the building - Occasionally, • Must be able to position oneself and move under/around/over equipment - Occasionally, • Must be able to handle/adjust/inspect/position various items and equipment - Constantly, • Must be able to communicate and exchange information with others - Frequently, • Must be able to perform tasks that require repetitive handling/adjusting/inspecting/positioning of items and equipment - Constantly, • Must be able to distinguish and detect information such as writing and defects - Frequently WORKING CONDITIONS • Noise - Frequently PAY RATE For positions located in California, pay for this job type falls within the following range and varies based on scope and complexity of job responsibilities: $17.26 - $23.00 per hour. As this position is assigned to the 2nd Shift, a 10% premium is added to the base hourly pay rate for all hours worked during that shift. WHAT WE OFFER • Opportunity to work in a growing company, • Ability to help people live a longer, more active life, • Comprehensive benefit package, • Ability to work in an organization that values:, • Integrity First: We do the right thing, • Teamwork: We are one Orchid, • Results: Our results matter ADDITIONAL REQUIREMENTS • Candidates offered employment may be required to submit to a pre-employment background check and pre-employment drug-screening based on position requirements, • Applicants must be authorized to work for ANY employer in the U.S. We are unable to sponsor or take over sponsorship of an employment Visa at this time, • Candidates must be able to provide proof of eligibility to work in the United States through eVerify At Orchid, we fully support a diverse and inclusive workplace and we are an equal opportunity employer. All qualified applicants will receive consideration for employment without regard to, among other things, race, color, religion, sex, sexual orientation, gender identity, national origin, hair type, age, status as a protected veteran, or disability. Orchid Orthopedic Solutions only pays fees for solicited presentations of job seekers submitted through our preferred vendor job board by recruiters, employment agencies, or other parties.

CNC Lathe Operator- 2nd shift Mon-Fri 3:30pm-12:00am Pay Range $27-29 + plus 12% shift differential Eligible for quarterly bonuses $3,000 sign on bonus Hiring Immediately Make Your Mark. Shape Your Future. It takes great people to achieve greatness. People with a sense of purpose and integrity. People with a relentless pursuit of excellence. People who care about making things better For Those Who Make The World™. Sound like you? Join our top-notch team of 54,000+ professionals in 60 countries who are making their mark on some of the world's most beloved brands, including DEWALT, CRAFTSMAN, STANLEY, BLACK+DECKER, IRWIN, LENOX and more. What You'll Do As a CNC operator, you'll be part of our team located in Fullerton, CA. You'll get to: \n • Manufacture products in accordance with engineering drawings\n, • Check product dimensions utilizing proper equipment\n, • Record, as required, all productivity on company system\n, • 3-5 years of operation experience with CNC Lathes (Takisawa).\n\n, • Ability to set-up a CNC lathe (including work holding, kitting of tools, touching off of tools/establishing offsets, reading of manufacturing drawings, and first article buy-off) on FANUC controls.\n, • Experience with utilizing a pre-setter off line for tool offsets\n, • Experience with quick change tooling\n, • Experience with macro programming and Mastercam or other major programming software\n, • Knowledge of basic measuring tools, calipers, micrometers, comparators and math required\n, • Solid understanding of GD&T with ability to read and interpret drawing requirements\n, • Must be able to lift 30 lbs.\n\n What You'll Receive You'll receive a competitive wage and a great benefits plan: \n • Medical, dental, life, vision, wellness program, disability, 401(k), Employee Stock Purchase Plan, paid time off and tuition reimbursement.\n Joining the Stanley Black & Decker team means working in an innovative, tech-driven and highly collaborative team environment supported by over 58,000 professionals in 60 countries across the globe. Here, you'll get the unique chance to impact some of the world's most iconic brands including STANLEY TOOLS, DEWALT, CRAFTSMAN, MAC TOOLS and Black + Decker. Your ideas and solutions have the potential to reach millions of customers as we work together to write the next chapter in our history. Come build with us and take your career to new heights. Who We Are We're the World's largest tool company. We're industry visionaries. We're solving problems and advancing the manufacturing trade through innovative technology and our Industry 4.0 Initiative. We are committed to ensuring our state-of-the-art "smart factory" products and services provide greater quality to our customers & greater environmental and social value to our planet. We are unique in that we have a rich and storied history dating back to 1843, but that hasn't stopped us from evolving into a vibrant, diverse, global growth company. Benefits & Perks You'll get a competitive salary and a comprehensive benefits plan that includes medical, dental, life, vision, wellness program, disability, retirement benefits, Employee Stock Purchase Plan, Paid Time Off, including paid vacation, holidays & personal days, and tuition reimbursement. And, of course, discounts on Stanley Black & Decker tools and products and well as discount programs for many other vendors and partners. What You'll Also Get Career Opportunity: Career paths aren't linear here. Being part of our global company with 60+ brands gives you the chance to grow and develop your skills along multiple career paths. Learning & Development: Our lifelong learning philosophy means you'll have access to a wealth of state-of-the-art learning resources, including our Lean Academy and online university (where you can get certificates and specializations from renowned colleges and universities). Diverse & Inclusive Culture: We pride ourselves on being an awesome place to work. We respect and embrace differences because that's how the best work gets done. You'll find we like to have fun here, too. Purpose-Driven Company: You'll help us continue to make positive changes in the local communities where we work and live as well as in the broader world through volunteerism, giving back and sustainable business practices. EEO Statement: All qualified applicants to Stanley Black & Decker are considered for employment without regard to race, color, religion, age, sex, sexual orientation, gender identity, national origin, disability, veteran's status or any other protected characteristic. If you require reasonable accommodation to complete an application or access our website, please contact us at (860) 827-3923 or at [email protected]. Due to volume, we cannot respond to unrelated inquiries about the status of a completed application or resetting an account password. Know Your Rights: Workplace discrimination is illegal (eeoc.gov)

Responsibilities About Howmet Aerospace Howmet Fastening Systems (HFS) is seeking a CNC Tech II- 2nd Shift for our Fullerton, CA location. HFS is a business unit of Howmet Aerospace, headquartered in Torrance, California. We hold the number one global position in aerospace fastening systems, and we're the North American leader in commercial transportation fasteners. Our high-tech, multi-material fastening systems are found nose to tail on aircraft and aerospace engines. Our products are also critical components of industrial gas turbines, automobiles, commercial transportation vehicles, and construction and industrial equipment. Summary Requires, under guidance of senior personnel, the operation of CNC controlled machine tools to perform any sequence of programmed operation using programs and tool layouts provided. Essential Duties and Responsibilities \n • Selects and sets proper tooling as identified on tool layout to correspond with program.\n, • Makes set-ups by using typical tooling fixtures and indicating target diameters, hole alignments, or spindle run out.\n, • Loads and proves out program and runs and self-inspects first article samples. Adjusts set-up as necessary to conform to dimensions and tolerances.\n, • Completes as directed all necessary documentation for each set-up. Such as S.P.C. charts, set-up checklist, first article verification, etc.\n, • Run, monitor and troubleshoot equipment in production, adjusting set-up as necessary.\n, • Monitor tool life and dimensional characteristics of product. Replenish tooling as directed. \n, • Monitor process using S.P.C. techniques.\n, • Parts to be lifted and/or transported may weigh up to 30 lbs. \n, • Reads blueprints and has the knowledge to use micrometers, calipers, comparators, thread gauges, depth micrometers and dial indicators as needed.\n, • Keeps work area clean, safe and in an orderly fashion on a daily basis.\n, • Performs other tasks of equal or lesser skill as required.\n\n Qualifications Basic Qualifications: • Minimum of two years related experience and/or training in machine shop operation running a variety of machine shop equipment including CNC equipment; or equivalent combination of education and experience., • Ability to read and interpret blueprints and work instructions, • Understanding of cutting tools (offset and geometry) and must know "G" and "M" Codes, • Excellent troubleshooting skills, • Willing to cross train and/or assist other departments to meet facility goals, • Use the necessary measuring tools (Micrometers, Calipers, Dial Indicators, Comparator, Gages, etc) as required, • Good communication skills, • Employees must be legally authorized to work in the United States. Verification of employment eligibility will be required at the time of hire. Visa sponsorship is not available for this position. Physical Demands: The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. The employee is responsible to maintain fitness-for-duty while holding the above-described position and should be able to perform the essential tasks of the position in a safe, appropriate and effective manner. This refers to the physical, mental and emotional duties of the job. • Must be able to lift/move 30 lbs. (may not exceed per EHS policies), • Must be able to stand for long periods of time, • Reaching above and below, stooping, kneeling, crouching, and bending., • Need to be able to wear safety steel toe shoes and walk around shop floor environment as needed., • Be able to remove dangling jewelry for shop floor assigned tasks, and wear hearing protection as needed. Preferred Qualifications: • High School Diploma or GED equivalent, • Understanding of 5S principals; Sort, Simplify, Shine, Standardize and Sustain, • SPC knowledge highly desirable Benefits/Salary: The position includes competitive wages and a comprehensive benefits package available day one of hire, including health insurance (medical, dental, vision), excellent 401k matching program, paid holidays and vacation. Howmet Aerospace curates a strong working environment through opportunities for career progression, community engagement activities, and flexible schedules contingent upon role and location. The salary range for this position is $18.82 to $31.43. About Us Howmet Aerospace Inc. (NYSE: HWM), headquartered in Pittsburgh, Pennsylvania, is a leading global provider of advanced engineered solutions for the aerospace and transportation industries. Our primary businesses focus on jet engine components, aerospace fastening systems, titanium structural parts and forged wheels. With $7.4 Billion in revenue in 2024, our products play a crucial role in enabling fuel efficiency and lightweighting, contributing to our customers' success and making a positive impact on the world. To learn more about the way Howmet Aerospace Inc. is advancing the sustainability of our customers, markets, and communities where we operate, review the 2024 Environmental Social and Governance report at . Follow: LinkedIn, Twitter, Instagram, Facebook, and YouTube. Equal Opportunity Employer: Howmet is proud to be an Equal Employment Opportunity employer. We are committed to creating an inclusive environment for all employees. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability, status as a protected veteran, or other applicable legally protected characteristics. If you need assistance to complete your application due to a disability, please email [email protected] About the Team Howmet fastening systems are the premier aerospace and industrial fasteners, latches, bearings, fluid fittings and installation tools. Our products are used nose to tail on commercial and military defense aircraft, as well as on jet engines, automobiles, commercial transportation vehicles, wind turbines, solar power systems, and construction and industrial equipment.

EOE Statement We are an equal employment opportunity employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, national origin, disability status, protected veteran status or any other characteristic protected by law. About the Organization Hydraflow provides fluid transfer solutions that reduce customer's installation time, waste, weight and life-cycle costs. In addition we couple our highly innovative and differentiated products with a culture of service and quality, giving our customer the competitive advantage to succeed in their business. Category Manufacturing Description Overall Purpose: The Sr. CNC Programmer is responsible to write and prove new and existing programs to ensure dimensionally correct machined components. They will need to interpret both drawings as well as 3d models to produce machine instruction and tool selection to ensure both machine efficiency and accuracy. Essential Duties & Responsibilities: • Program CNC Machines utilizing Mastercam for both Mills and Lathes, • Review incoming job orders and prepare programs per revision, • The ability to work with machinists to produce efficient and accurate programs with existing equipment, • Perform file maintenance, • Perform First Article Inspection, including molds and segment inspection as required, • Enter SPC jobs into the computer, • Collect SPC data on the computer, • Send and retrieve programs from the main computer, • Complete daily paperwork, • Ability to set-up mills and lathes, • Perform complete inspection of parts, • Read blue prints, • Crosstrain in other areas as needed, • Clean work areas, • Follow both verbal and written instructions, • Adhere to 5S Standards Position Requirements Qualification Requirements: • High School education or equivalent, • Must possess basic computer skills, • Minimum 10 years of CNC programming experience, • Must be capable of programming using Master Cam Mill / Okuma Lathe, • Must be familiar with Okuma lathes, HAAS milling machines and Daewoo/Fanuc Control, • Ability to program 5th axis Milling, • Strong understanding of GD&T, • Must be capable of performing duties and responsibilities with minimum supervision, • Able to read and understand blue prints, • Knowledge of basic measuring tools, calipers, micrometers, comparators and math required, • Fluent in English (able to read, speak, write and understand), • While performing duties of the job, the employee is required to:, • Regularly stand, walk, and reach with both hands and arms, • Perform repetitive motions, • Regularly lift 15+ pounds Must be US Persons based on ITAR definition (US Citizen or Permanent Resident).* This position is expected to be exposed to information which is subject to US export control regulations, i.e. the International Traffic in Arms Regulations (ITAR) or the Export Administration Regulations (EAR). All Applicants must be U.S. persons within the meaning of U.S. regulations. Hydraflow provides equal employment opportunities to all employees and applicants for employment and prohibits discrimination and harassment of any type without regard because of any one, or combination of any one or more protected characteristics including race, color, religion, creed, age, sex, gender, gender identity, gender expression, pregnancy, medical condition, genetic information, sexual orientation, national origin or ancestry, citizenship, marital status, physical or mental disability, military or veteran status, victims as well as those who have a family member that is a victim of any qualifying act of violence, those who are perceived to have a combination of protected characteristics or are perceived as being associated with a person who has these characteristics or any other basis protected by law This policy applies to all terms and conditions of employment, including recruiting, hiring, placement, promotion, termination, layoff, recall, transfer, leaves of absence, compensation and training. This role starts between $40-50/hr Number of Openings 1 Exempt/Non-Exempt Non-Exempt Full-Time/Part-Time Full-Time Shift Days This position is currently accepting applications.