Offres cnc à Tampa, FloridaCréer des alertes d'emploi

Job Description Job Summary: The Roll Machine Operator is responsible for lifting steel plates of various sizes using an overhead crane with various lifting clamps, hooks, and chains to position the plate into a CNC roll machine. The operator utilizes a control panel to operate the machine, which rolls the steel plate to flatten or shape it depending on the job requirements. The Roll Operator continually monitors the quality and flatness/shape of the product throughout the process. Essential Functions: • Support all TTI/FSS Company and OSHA Safety Policies to ensure they are followed, • Operate overhead crane to load, unload, and position plate on roll machine, • Roll product within specified tolerance on drawings, • Detect and report defective materials or questionable conditions to the foreman or supervisor, • Accurately document applicable job, product, and quality information utilizing computer and paper documents as required Additional Duties: • Additional responsibilities or duties may be required as needed in support of company operations Quality Standards • Must be able to read and understand drawings, codes, and specifications. Will ensure all established fabrication procedures are followed, • Maintain the work area and equipment in a clean and orderly condition, • Adhere to all safety requirements and protocols, • Safety Focused Teamwork Teamwork is essential in this position and the Plate Roll Machine Operation must have a positive attitude and be able to work effectively with all departments, managers, and staff. Actively participate in Safety meetings and promote company safety culture while working closely with the safety department. Qualifications An individual must be able to perform each essential duty above average and always represent the company in a professional manner. The requirements listed are representative of the minimum knowledge, skill, and/or ability required. Education and/or Experience • High School Diploma, • 1 year of experience in steel and fabrication facility (preferred) Language Skills Must be able to communicate professionally and effectively with co-workers, other departments, and managers. Reporting Reports to Facility Superintendent with a direct line of communication to the Prefabrication Manager. Powered by JazzHR 6BouR0nqWb

Job Description SUMMARY The Custodian is responsible for ensuring that the building and facilities are clean and maintained. Schedule is Monday through Friday 5:00 am - 1:30 pm. RESPONSIBILITIES include the following. Other duties may be assigned. Clean building floors by sweeping, mopping, scrubbing, or vacuuming Service, clean, and supply restrooms Clean windows, glass partitions, or mirrors, using soapy water or other cleaners, sponges, or squeegees Gather and empty trash Cleans grounds and parking lot of litter, glass, or other debris Notify managers concerning the need for repairs Follow procedures for the use of chemical cleaners and power equipment, preventing damage to floors and fixtures Clean and polish furniture, fixtures, walls, machines, and equipment Requisition supplies or equipment needed for cleaning and maintenance duties Mix various chemicals in containers to prepare cleaning solutions, according to specifications Move heavy furniture, equipment, or supplies, either manually or by using hand trucks Performs routine maintenance on machines and equipment Collaborate with others to resolve any problems Follow all procedures and alert your supervisor if procedures may need reviewed/updated Maintain a safety, clean, and orderly work environment EDUCATION and/or EXPERIENCE High school diploma or equivalent required Two years or more related experience Good communication and interpersonal skills Ability to follow oral and written instructions in English Ability to prioritize multiple tasks Ability to work effectively with a team Ability to work independently as needed to support the group effort Knowledge of standard methods, practices, tools, and equipment for janitorial service PHYSICAL REQUIREMENTS Ability to move product, supplies, and boxes up to and over 75 lbs. Repetitively sitting, standing, walking, lifting, carrying, pushing, pulling, balancing, stooping, kneeling, crouching, reaching, handling, feeling, talking, hearing, visual acuity-near and far, depth perception, field of vision, color vision. ADDITIONAL REQUIREMENTS Must wear OSHA approved safety shoes Must wear ANSI Z-87.1-2010 Impact Rated safety glasses Must wear current vision prescription, if required Must wear long pants and a short sleeve shirt that is tucked in Company DescriptionSMT specializes in precision machined components and assemblies primarily for the aircraft, aerospace, and defense industries. We have 21 CNC machines, including 6 horizontal mills (3 of which are on a 23 pallet FMS and 1 has its own 6 pallet system), 1 high speed, 4-axis, vertical mill, 4 vertical mills with capability up to fifth axis positioning, and 8 lathes (some with live tooling). Our 2 most advanced CNC lathes are twin spindle, have twin Y axis turrets with live tooling, and are in a cell with a Fanuc robot. Some of our niche capabilities include: -Complex internal and external deburring and finishing under 10-40x magnification -Process to create precision .0005" tolerance bores with less than 16 microfinish, and 11 sigma capability -Precision surface treatment applications that eliminate the need for masking when parts require a combination of anodize and chemfilm, which results in clear and consistent edges every time.SMT specializes in precision machined components and assemblies primarily for the aircraft, aerospace, and defense industries.\r\nWe have 21 CNC machines, including 6 horizontal mills (3 of which are on a 23 pallet FMS and 1 has its own 6 pallet system), 1 high speed, 4-axis, vertical mill, 4 vertical mills with capability up to fifth axis positioning, and 8 lathes (some with live tooling). Our 2 most advanced CNC lathes are twin spindle, have twin Y axis turrets with live tooling, and are in a cell with a Fanuc robot.\r\nSome of our niche capabilities include:\r\n-Complex internal and external deburring and finishing under 10-40x magnification\r\n-Process to create precision .0005" tolerance bores with less than 16 microfinish, and 11 sigma capability\r\n-Precision surface treatment applications that eliminate the need for masking when parts require a combination of anodize and chemfilm, which results in clear and consistent edges every time.

Job Description Job Title : EDM Operator Location : Tampa, FL Duration : 6 months (contract to hire) Shift : 2ND SHIFT: 1 PM TO 9 PM Mon to Fri RESPONSIBILITIES Responsible for complying with TPM (Total Preventative Maintenance) Program. Responsible for complying with CTQ (Critical to Quality) Program. Set up and operate assigned machine. Solving minor set up problems. Perform machining operations per specifications. Perform safety procedures and general daily housekeeping. Maintain production standards and quality. Regular attendance and punctuality. Adhere to and promote Corporate Code of Ethical Standards. Ensures compliance with Company IPM/QPM and ISO-9000 quality requirements. Operate and set up computerized numerical control machines: lasers CNC - EDM, CNC EDM machining centers Utilize measuring tools to inspect parts. The marginal duties and responsibilities (performed occasionally or at irregular intervals) for this position are: Perform preventative maintenance on the equipment when required. R&D of new programming. Perform manual machining operations. Performing other tasks in the facility, as needed. Quals-- 2ND SHIFT: 1 PM TO 9 PM Qualifications: To perform this job successfully, an individual must be able to perform each essential duty satisfactorily. The requirements listed below are representative of the knowledge, skill, and/or ability required. The specific EDUCATION and/or EXPERIENCE requirements of this position are: H.S. diploma or equivalent. Three (3) years + experience in machining, measuring equipment and CNC EDM set-up and program editing. Good verbal and written communication skills. Problem-solving ability. Ability to accurately interpret operation sheets and/or work in-process documents. Math and computer technology skills as well as the ability to read and use measurement tools. LANGUAGE SKILLS: Ability to read and interpret documents such as safety rules, operating and maintenance instructions, and procedure manuals. Ability to write routine reports and correspondence. Ability to communicate effectively in English with supervisor, engineers, and co-workers. MATHEMATICAL SKILLS: Ability to add, subtract, multiply, and divide in all units of measure using whole numbers, and decimals. REASONING ABILITY: Ability to apply commonsense understanding to carry out instructions furnished in written, oral, or diagram form. Ability to deal with problems involving several concrete variables in standardized situations. PHYSICAL DEMANDS:The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. While performing the duties of this job, the employee is regularly required to stand. The employee frequently is required to walk; use hands to finger, handle, or feel objects, tools, or controls; reach with hands and arms; and climb or balance. The employee is occasionally required to stoop, kneel, crouch, or crawl and talk or hear. The employee must regularly lift and/or move up to 50 pounds Specific vision abilities required by this job include close vision, distance vision, peripheral vision, depth perception, and the ability to adjust focus. WORK ENVIRONMENT: The work environment characteristics described here are representative of those an employee encounters while performing the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. #TB_EN #ZR Company DescriptionFounded in 2002 by three former Monster.com executives; TalentBurst is an award-winning full-service Staffing Firm working directly with Fortune 500 companies in the US and Canada. We specialize in Contract and Contract to Permanent roles across many industries and have direct/contractual relationships with all our clients. Please visit our website www.talentburst.com or come meet us at our offices in Natick, MA, Miami, FL, Christiansburg, VA, Vineland, NJ, Houston, TX & downtown San Francisco, CAFounded in 2002 by three former Monster.com executives; TalentBurst is an award-winning full-service Staffing Firm working directly with Fortune 500 companies in the US and Canada. We specialize in Contract and Contract to Permanent roles across many industries and have direct/contractual relationships with all our clients. Please visit our website www.talentburst.com or come meet us at our offices in Natick, MA, Miami, FL, Christiansburg, VA, Vineland, NJ, Houston, TX & downtown San Francisco, CA

Job Description This position requires hands-on experience. This is for a full-time job, immediate start in a Sign Manufacturing company. If you’re a sign industry professional with the qualifications listed below, we want to hear from you TODAY! • 3+ years professional experience., • Dexterity with tools in a manufacturing, installation, or maintenance setting., • Experience in vinyl preparation and application, sign manufacturing, painting, and installation is a plus., • Ability to learn how to operate a CNC Router, Laser cutter, printer, and various types of sign manufacturing equipment., • Solid track record of sign manufacturing meeting deadlines., • Solid communication skills will be expected., • Good math skills., • Strong people skills, able to work both independently and in a fast-paced team environment, • Work directly with both customers and subcontractors, • Familiarity with different types of materials in the industry is a plus., • Computer skills, including experience and knowledge of Adobe Creative Cloud is a plus. If you’re ready to both accept the responsibilities AND enjoy the benefits of working for a professional sign manufacturing company, submit your resume in the strictest confidence now. Location: Tampa, FL · Compensation: Commensurate with skills and experience. · Principals only. Recruiters, please don't contact this job poster. · Please, no phone calls about this job! · Please do not contact job poster about other services, products or commercial interests.

Job DescriptionWaterjet Operator – Manufacturing / Production Location: Westchase, FL (33626) Pay: $18–$25/hr, based on experience Schedule: Monday–Friday, 7:30 AM – 4:00 PM No overtime Position Overview We are seeking a skilled Waterjet Operator to run and maintain waterjet cutting equipment for precision manufacturing. The ideal candidate has experience with CNC machining or automated cutting systems, can read blueprints, and is comfortable working with metal, plastics, and other materials. Accuracy, safety, and attention to detail are essential. Key Responsibilities Operate waterjet cutting machines to produce parts to specification Load materials, set up cutting parameters, and monitor machine performance Read and interpret blueprints, drawings, and work orders Inspect finished parts for accuracy, quality, and proper tolerances Perform basic machine maintenance, cleaning, and nozzle checks Adjust cutting speeds, pressures, and tool paths as needed Maintain accurate production records and follow safety procedures Keep work area clean, organized, and compliant with shop standards Requirements Previous experience as a Waterjet Operator or similar machine operator Ability to read and interpret technical drawings Basic understanding of CNC or automated cutting systems Ability to lift 40–50 lbs and stand for long periods Strong attention to detail and quality Reliable, punctual, and safety-focused Preferred Qualifications Experience with Flow, OMAX, or similar waterjet systems Familiarity with CAD/CAM files or machine programming Experience in metal fabrication or manufacturing environments Apply Now If you have waterjet or CNC operating experience and want a stable, no-overtime schedule, apply now to be considered. #3379NW

Job DescriptionTop Job Located in Gibsonton, FL Salary: $20.00-$24.00/Hr. *]:pointer-events-auto R6Vx5W_threadScrollVars scroll-mb-[calc(var(--scroll-root-safe-area-inset-bottom,0px)+var(--thread-response-height))] scroll-mt-[calc(var(--header-height)+min(200px,max(70px,20svh)))]' dir='auto' data-turn-id='request-WEB:ed9d257c-1312-48f3-8a91-ac775acdd366-0' data-turn-id-container='request-WEB:ed9d257c-1312-48f3-8a91-ac775acdd366-0' data-testid='conversation-turn-2' data-turn='assistant'> Location: Gibsonton, FL Pay: $20.00-$24.00/hour (Based on Experience) Schedule: • Monday-Thursday: 7:00 AM-4:00 PM, • Friday: 7:00 AM-5:00 PM, • 1-hour unpaid lunch, • Saturday overtime available as needed Status: Temp-to-Perm About the Role A leading manufacturer of pre-engineered steel building systems is seeking a dependable Brake Press Operator to join their production team. This position supports the fabrication of metal building panels by operating CNC/Brake Press machinery and assisting with various production processes. The ideal candidate enjoys hands-on work, has strong mechanical aptitude, and takes pride in producing quality products in a fast-paced manufacturing environment. Responsibilities • Operate CNC/Brake Press machinery used in the production of steel building panels., • Load, unload, and stage materials throughout the production process., • Read and follow work orders and production specifications., • Measure materials accurately using tape measures and other measuring tools., • Inspect finished products to ensure quality standards are met., • Maintain a clean, organized, and safe work area., • Assist with general labor tasks throughout the panel shop as needed., • Work with the production team to meet daily production goals. Qualifications • Previous manufacturing or general labor experience preferred., • Mechanical aptitude and willingness to learn CNC/Brake Press equipment., • Ability to accurately read a tape measure., • Comfortable working around steel products and manufacturing equipment., • Able to lift, bend, stand, and work throughout an entire shift., • Strong attention to detail and commitment to safety., • Dependable attendance and positive work ethic. Hiring Requirements • Drug screen (includes THC), • National background check, • No violent felony convictions, • No theft-related convictions within the past 3 years Benefits Upon Permanent Hire • Medical, Dental, and Vision Insurance (approximately 80% employer-paid), • PTO begins accruing after 90 days, • 6 paid holidays, • 2 floating holidays, • 401(k) with 4% company match Why Join? • Stable Monday-Friday schedule, • Weekly pay through Express Employment Professionals, • Opportunity to transition into a permanent position with excellent benefits, • Career growth with an established steel building manufacturer, • Hands-on work in a clean, team-oriented production environment #3107FL Express Office: Brandon 626 Bloomingdale East Avenue Brandon, FL 33511

Job Description Position Summary The Tool Design Engineer is responsible for designing, developing, and improving tooling and fixture solutions used in CNC machining and manufacturing processes. This role supports production efficiency, quality, and repeatability by delivering robust, practical tooling designs that meet customer and internal requirements. Key Responsibilities · Design and develop custom fixtures, workholding, and tooling solutions for CNC machining operations. · Create detailed 3D models and 2D drawings using CAD software. · Collaborate with manufacturing engineers, programmers, and machinists to ensure designs are practical and efficient. · Support new part introductions with tooling concepts that optimize cycle time and quality. · Evaluate existing tooling and recommend improvements. · Select appropriate materials and components. · Ensure designs meet GD&T requirements. · Troubleshoot tooling issues on the shop floor. · Maintain organized documentation of tooling designs. · Support continuous improvement initiatives. Qualifications · 3+ years of tooling/fixture design experience in a machining environment. · Proficiency in CAD software. · Working knowledge of CNC machining processes. · Understanding of GD&T. · Strong problem-solving skills. Company DescriptionSMT specializes in precision machined components and assemblies primarily for the aircraft, aerospace, and defense industries. We have 21 CNC machines, including 6 horizontal mills (3 of which are on a 23 pallet FMS and 1 has its own 6 pallet system), 1 high speed, 4-axis, vertical mill, 4 vertical mills with capability up to fifth axis positioning, and 8 lathes (some with live tooling). Our 2 most advanced CNC lathes are twin spindle, have twin Y axis turrets with live tooling, and are in a cell with a Fanuc robot. Some of our niche capabilities include: -Complex internal and external deburring and finishing under 10-40x magnification -Process to create precision .0005" tolerance bores with less than 16 microfinish, and 11 sigma capability -Precision surface treatment applications that eliminate the need for masking when parts require a combination of anodize and chemfilm, which results in clear and consistent edges every time.SMT specializes in precision machined components and assemblies primarily for the aircraft, aerospace, and defense industries.\r\nWe have 21 CNC machines, including 6 horizontal mills (3 of which are on a 23 pallet FMS and 1 has its own 6 pallet system), 1 high speed, 4-axis, vertical mill, 4 vertical mills with capability up to fifth axis positioning, and 8 lathes (some with live tooling). Our 2 most advanced CNC lathes are twin spindle, have twin Y axis turrets with live tooling, and are in a cell with a Fanuc robot.\r\nSome of our niche capabilities include:\r\n-Complex internal and external deburring and finishing under 10-40x magnification\r\n-Process to create precision .0005" tolerance bores with less than 16 microfinish, and 11 sigma capability\r\n-Precision surface treatment applications that eliminate the need for masking when parts require a combination of anodize and chemfilm, which results in clear and consistent edges every time.

Job Description Job description: We are looking for a dependable CNC Machine Operator to join our metal fabrication team. Experience in manufacturing, fabrication, or machine operation is preferred. Candidates must be comfortable working with measurements and reading a tape measure accurately. Shift: 1st Shift | Monday - Friday, sometimes Saturday | 5:00am-1:30pm 2nd shift | Monday-Friday, Sometimes Saturday | Job Duties: • Operate a CNC Machine to bend and fold metal parts, • bend and shape steel materials, • Read and use a tape measure accurately, • Follow work orders and production instructions, • Inspect finished parts for quality, • Maintain a clean and safe work area, • Assist with other shop duties as needed, • Prior CNC machine experience Qualifications: • Previous manufacturing, fabrication, or machine operation experience preferred, • Must be able to read a tape measure, • Basic math and measurement skills required, • Blueprint reading is a plus, • CNC or lathe experience is helpful but not required, • Reliable and able to work independently Physical Requirements: • Ability to lift 50-75 lbs as needed, • Ability to stand, walk, bend, and move throughout the shift, • Comfortable working in a manufacturing environmentCompany DescriptionWe work hand in hand with our clients to fill positions quickly and hire employees efficiently. Our respectful approach to staffing offers an advantage above others. You won't be treated as a number, but as a prospective employee looking for a career.We work hand in hand with our clients to fill positions quickly and hire employees efficiently. Our respectful approach to staffing offers an advantage above others. You won't be treated as a number, but as a prospective employee looking for a career.

Job Description WHO WE ARE Founded in 1959 by Ed Miller near Chicago, Prince Industries has grown from a one-man shop into a global manufacturing partner. With seven facilities across the U.S. and China, we serve industries from hydraulics to aerospace, handling everything from just-in-time components to high-volume assemblies. At Prince, we don’t just make parts—we solve complex supply chain challenges. We are a strategic partner, focused on helping clients improve products, reduce costs, and simplify operations. Certified to ISO 9001:2015, ISO 13485, and AS9100 standards, we combine quality, innovation, and growth-minded thinking to deliver real value. JOB SUMMARY Manufacturing Precision Metal Products on CNC Turning Centers. Qualified to operate Twin Spindle / Twin Turret machines manufactured by Eurotech and Mori Seiki. Machining metallic and nonmetallic workpieces for the Aerospace Industry by performing the following duties. OFFERING A $2,500 SIGN ON BONUS FOR MACHINISTS AT OUR TAMPA LOCATION! ESSENTIAL DUTIES AND RESPONSIBILITIES • Read and interpret process plans, and blueprints to determine necessary machining, dimensional specifications, and operating requirements., • Utilizes various types of inspection instruments to check work per print., • Completes necessary job-related paperwork to include part identification, inspection documents, and production log., • Perform basic equipment maintenance: proper coolant levels, filters, fan operation, cleans the machine, etc. EDUCATION AND EXPERIENCE • 2 Years - Setup and Operating Twin Spindle / Twin Turret, • 2 Years - Precision CNC Machining, • Experience with Fanuc Controls PHYSICAL JOB REQUIREMENTS • Regularly required to stand and reach the duration of shift, 8 hours., • Occasionally required to walk, sit, stoop, kneel, crouch, or bend., • Frequently required to perform repetitive or short-cycles work., • Regularly lift, push, or pull up to 10 pounds and occasionally up to 50 pounds., • Strong work ethic: Willing to work OT to meet tight deadlines as needed., • Understands and observes all necessary safety procedures: safety glasses, shoes, ear protection, machine interlocks, lifting guidelines, etc. as designated in the specific work area assigned., • Must be able to communicate clearly and accurately in noisy environments., • Must also have close, distance, and peripheral vision, with the ability to adjust focus and judge depth. Color vision is required as well., • Must be able to read, write, and speak English. BENEFITS • Blue Cross Blue Shield Medical insurance (PPO and HDHP with HSA) w/ Prescription Coverage, • Dental PPO Insurance, • Short-Term & Long-Term Disability Insurance, • Company Paid Life Insurance and AD & D – Including options to add on additional life insurance for yourself, spouse & children., • Critical Illness Insurance, • Accident Insurance, • 401(k) Fidelity Plan with strong employer match, • Personal Retirement Advisor, • Generous PTO Policy and 9 Paid Holidays per year, • 100% Tuition Reimbursement for Job-Related Classes, • Personal Protective Equipment reimbursement (safety glasses, shoes, etc.), • Uniform Rental Service, • Employee Events Compensation: Pay: $29 - 33 Hourly (final rate is determined based on experience). OFFERING A $2,500 SIGN ON BONUS FOR MACHINISTS AT OUR TAMPA LOCATION! Due to ITAR regulations, only U.S. persons—defined as U.S. citizens, lawful permanent residents (Green Card holders), and U.S. nationals—are eligible for this position. *We are an Equal Employment Opportunity ("EEO") Employer. Applicants can learn more about Prince's status as an equal opportunity employer by viewing the federal "EEO is the Law" poster ( https://www.eeoc.gov/employers ) #indeedcnc Second Shift- 3:30pm - 12:00am, Monday - Friday

Job Description Manufacturing Engineer The Manufacturing Engineer is responsible for continuous improvement and support of the production of current and future product lines. Focus is on improving manufacturing processes, enhancing product quality, and increasing efficiencies. Collaboration with cross-functional teams to design and implement innovative solutions. Key responsibilities include: • Process Development & Optimization – Design, implement, and refine manufacturing processes and tooling to enhance production operations., • Standardization – Develop flexible work instructions to standardize fabrication and assembly procedures, especially for semi-custom product lines., • Testing & Quality Assurance – Design and implement testing equipment and procedures to ensure design validation, maintain quality control, and meet product certification requirements., • Cross-functional Collaboration – Collaborate with engineering and manufacturing teams to support new product development and introduce new innovative solutions., • CNC Programming – Develop and implement G-code programming for CNC machines to optimize machining processes., • Safety Compliance - Maintain and promote safe working environment in accordance with best practices and safety regulations. Requirements: • Proficiency in CNC programming and understanding manufacturing automation., • Experience with CAD software and manufacturing simulation tools; primarily Solidworks, Mastercam, and AutoCad/Draftsight., • Excellent problem-solving skills and attention to detail., • Ability to work effectively in a team-oriented environment, with a collaborative approach to solving problems., • Strong attention to detail and a commitment to high-quality standards., • Knowledge of testing procedures, quality control methodologies, and relevant certification processes., • Understanding of manufacturing safety protocols., • Ability to create G-code programming for CNC machines Essential Functions: • Design, develop, and implement manufacturing processes and systems., • Analyze and improve existing manufacturing processes for efficiency and effectiveness., • Conduct time and motion studies to identify opportunities for process improvements., • Collaborate with product design teams to ensure manufacturability and cost-effectiveness of new products., • Develop and maintain process documentation, including work instructions and standard operating procedures., • Troubleshoot and resolve manufacturing issues, providing technical support to production teams., • Lead and participate in continuous improvement initiatives, • Evaluate and recommend new manufacturing technologies and equipment., • Conduct training sessions for production staff on new processes and equipment., • Ensure compliance with safety and quality standards in all manufacturing activities. Experience: • Minimum of Associates Degree in Manufacturing Engineering, Mechanical Engineering, or related field., • Experience in a manufacturing environment (3+ years), lean manufacturing principles and quality improvement methodologies., • Experience with CAD software and manufacturing simulation tools; Solidworks, Mastercam, and AutoCad/Draftsight. Job Type: Full-time Schedule: • 8-hour shift, • Day shift, • Monday to Friday Work Location: • In person – Charlestown, NH, • In person – Tampa, FL

Job Description We are seeking a skilled CNC Water Jet Operator to join our manufacturing team. This role involves setting up, programming, and operating water jet cutting machines to precisely cut a variety of materials according to detailed specifications. The ideal candidate will possess strong mechanical aptitude, proficiency in CNC programming, and experience with precision measurement tools. This position plays a vital role in ensuring high-quality fabrication and efficient production workflows within our manufacturing facility. Duties • Set up and operate CNC water jet cutting machines, ensuring proper calibration and alignment for each job., • Program water jet equipment using CAD (Computer-Aided Design) files and CAM (Computer-Aided Manufacturing) software to produce accurate cuts., • Read and interpret blueprints, technical drawings, and GD&T (Geometric Dimensioning and Tolerancing) specifications to meet project requirements., • Perform routine maintenance on water jet machinery, including troubleshooting issues related to Fanuc controls and programmable logic controllers., • Utilize precision measuring instruments such as calipers, micrometers, and other tools to verify cut dimensions and ensure adherence to quality standards., • Handle materials safely using forklifts and other materials handling equipment; prepare materials for cutting and packaging., • Collaborate with fabrication teams on tooling setups, adjustments, and quality control measures to optimize production efficiency., • Maintain detailed records of job setups, machine parameters, and inspection results for process documentation., • Support other manufacturing processes such as welding, stamping presses, CNC milling machines, CNC lathes, press brake operations, and assembly line tasks as needed. Experience • Proven experience operating CNC water jet machines within a manufacturing or fabrication environment., • Familiarity with Fanuc controls, CNC programming, CAM software, and blueprint reading., • Mechanical knowledge related to machining processes including CNC milling machines, CNC lathes, stamping presses, and fabrication tools., • Experience with GD&T principles for precise measurement and quality assurance., • Hands-on skills with hand tools, precision measuring instruments (calipers, micrometers), and basic math calculations., • Knowledge of factory safety protocols, materials handling procedures, and warehouse operations., • Prior factory or manufacturing facility experience is highly desirable., • Additional skills in SolidWorks or CAD software are advantageous but not mandatory., • Ability to operate forklifts safely and efficiently is preferred. This position offers an engaging opportunity for individuals dedicated to precision manufacturing. We welcome applicants who are detail-oriented, proactive problem-solvers committed to maintaining high standards of quality in a fast-paced environment. Benefits: • 401(k), • Dental insurance, • Health insurance, • Paid time off, • Vision insuranceCompany DescriptionWe work hand in hand with our clients to fill positions quickly and hire employees efficiently. Our respectful approach to staffing offers an advantage above others. You won't be treated as a number, but as a prospective employee looking for a career.We work hand in hand with our clients to fill positions quickly and hire employees efficiently. Our respectful approach to staffing offers an advantage above others. You won't be treated as a number, but as a prospective employee looking for a career.

Job Description The Processing Supervisor is responsible for leading all material processing activities ensuring that work flows safely, efficiently, and accurately through cutting, forming, machining, and material prep operations. This role plays a key part in supporting IMP’s commitment to quality, on time delivery, and operational excellence by coordinating people, equipment, and processes to meet customer and production requirements. Essential Duties/Responsibilities: • Oversee daily operations for all processing areas, including saw cutting, laser cutting, plasma cutting, shearing, forming, machining, deburring, and material preparation, • Assign work, balance labor, and adjust priorities to support production schedules and customer commitments, • Ensure all jobs are processed according to drawings, specifications, and IMP quality standards, • Maintain consistent workflow between Processing, Fabrication, Welding, and Assembly to minimize bottlenecks and downtime, • Monitor WIP and ensure accurate job traveler movement throughout the facility, • Lead, coach, and support Processing team members, including operators, material handlers, and cross‑trained employees, • Provide clear expectations, regular feedback, and performance evaluations, • Support employee development through training, cross‑training, and skill‑building opportunities, • Foster a positive, safe, and accountable work environment aligned with IMP’s core values: People, Integrity, Unity, Results, and Excellence, • Verify accuracy of cuts, bends, tolerances, and material prep before releasing work to downstream departments, • Ensure compliance with MTR traceability, job travelers, customer specifications, and internal quality procedures, • Partner with Quality to address nonconformances and implement corrective actions, • Maintain clean, organized, and safety focused work areas in accordance with IMP safety policies and OSHA requirements, • Analyze workflow, equipment utilization, and labor allocation to identify opportunities for improvement, • Implement lean practices to reduce waste, improve throughput, and support continuous improvement initiatives, • Collaborate with Engineering and Production Planning to optimize routings, processing methods, and material flow, • Support preventive maintenance planning and ensure equipment is operating safely and efficiently, • Work closely with Scheduling, Purchasing, Fabrication, Welding, and Shipping to align priorities and resolve issues, • Provide accurate updates during daily production meetings, • Communicate delays, resource needs, and improvement opportunities to Operations leadership Required Skills/Abilities: • Technical understanding of metals (steel, aluminum, stainless) and fabrication processes, • Ability to manage multiple priorities in a fast‑paced manufacturing environment, • Data‑driven decision‑making and strong attention to detail, • Excellent organizational and time‑management skills, • Ability to build trust, motivate teams, and uphold IMP’s values in daily operations Qualifications and Experience: • 5+ years of experience in metal fabrication, machining, or industrial processing, • 2+ years of supervisory or lead experience preferred, • Strong working knowledge of processing equipment (lasers, saws, press brakes, CNC machines, etc.), • Ability to read and interpret blueprints, drawings, and material specifications, • Experience with ERP systems, job travelers, and production reporting, • Strong leadership, communication, and problem‑solving skills, • Demonstrated commitment to safety, quality, and continuous improvement Physical Requirements: • Ability to stand, walk, and move throughout the facility for extended periods, • Ability to lift up to 50 lbs as needed, • Comfortable working in a manufacturing environment with noise, heat, and moving equipment ADDITIONAL INFORMATION: In compliance with the Drug-Free Workplace Act of 1988, IMP has a longstanding commitment to provide a safe, quality-oriented and productive work environment. Alcohol and drug misuse pose a threat to the health and safety of IMP employees and to the security of the company's equipment and facilities. For these reasons, IMP is committed to the elimination of drug and alcohol use and misuse in the workplace. IMP does not discriminate in the provision of employment opportunities, benefits or privileges; to create discriminatory work conditions; or to use discriminatory evaluative standards in employment if the basis of that discriminatory treatment is, in whole or in part, the person's race (including hairstyle/texture), color, national origin, age, religion, disability status, sex, sexual orientation, gender identity or expression, genetic information or marital status. Discrimination of this kind may also be strictly prohibited by a variety of federal, state and local laws, including Title VII of the Civil Rights Act of 1964, the Age Discrimination Act of 1967 and the Americans with Disabilities Act of 1990. This policy is intended to comply with the prohibitions stated in these anti-discrimination laws.

Job DescriptionMust be willing to travel/permanently relocate to Jupiter, FL. What we offer: • Paid Lodging/Travel., • Immediate placement., • Weekend Shift., • PTO., • Paid Holidays., • Health Benefits. Essential Functions: • Machine parts to specifications using CNC multi-axis equipment such as lathes, milling machines, grinders or EDM., • Calculate dimensions and tolerances using knowledge of mathematics and instruments such as micrometers and calipers., • Measure and visually inspect completed components in process to detect defects and ensure conformance to specifications using precision instruments based on drawing or work instruction requirements., • Set-up, adjust and operate all of the manual and CNC machining centers in order to perform precision machining operations., • Align and secure holding fixtures, cutting tools, attachments accessories, and materials onto machines., • Monitor speed and feed rates during the machining process to complete machining efficiently and within tolerances., • Study sample parts, drawings, or engineering information in order to determine methods and sequences of operations needed to fabricate product and determine product dimensions and tolerances., • Select the appropriate tools, machines, and materials to be used in preparation for machining work based on the work instruction., • Maintain industrial machines per the required daily, weekly, and monthly preventative maintenance schedule., • Confer with engineering, technical lead, supervisor, and manufacturing personnel in order to exchange technical information., • Fit and assemble parts to make or repair machine tooling., • Perform cleaning requirements at the end of each shift., • Maintain and improve 5s standards for the work-center. Requirements: • High School Diploma or GED equivalent., • CNC programming certification / documented training is strongly preferred., • Must complete EHS assigned regulatory training for work area as described by PSM’s EHS Training Matrix., • 5+ years of experience in industry with specific skills related to manual and CNC machining of multi-axis machines., • Familiar with Fanuc Controls and has programming experience with multi-axis CNC equipment., • Working knowledge of GD&T is required., • Experience in computer skills to include Excel, Word, and email platforms., • Experience in electronic labor tracking databases., • Must be self-motivated and possess a demonstrated ability to handle multiple issues in a responsive and decisive manner., • Experience in quality systems. Prior experience working under formal environments such as NADCAP, ISO 9001, AS9100 or other quality programs., • Must be a detail-oriented, high energy, self-starter with the ability to drive the successful completion of projects within specified time frames., • Strong communication skills required both verbal and electronic., • Strong quality, attention to detail and customer focus skills., • Process and Team oriented; Multicultural sensitivity., • Trustworthy, quick learning, innovative and reliable.

Job Description Who We Are Founded in 1959 by Ed Miller near Chicago, Prince Industries has grown from a one-man shop into a global manufacturing partner. With seven facilities across the U.S. and China, we serve industries from hydraulics to aerospace, handling everything from just-in-time components to high-volume assemblies. At Prince, we don’t just make parts—we solve complex supply chain challenges. We are a strategic partner, focused on helping clients improve products, reduce costs, and simplify operations. Certified to ISO 9001:2015, ISO 13485, and AS9100 standards, we combine quality, innovation, and growth-minded thinking to deliver real value. JOB SUMMARY Manufacturing Precision Metal Products on CNC Turning Centers. Qualified to operate Twin Spindle / Twin Turret machines manufactured by Eurotech and Mori Seiki. Machining metallic and nonmetallic workpieces for the Aerospace Industry by performing the following duties. OFFERING A $2,500 SIGN ON BONUS FOR MACHINISTS AT OUR TAMPA LOCATION! ESSENTIAL DUTIES AND RESPONSIBILITIES • Read and interpret process plans, and blueprints to determine necessary machining, dimensional specifications, and operating requirements., • Utilizes various types of inspection instruments to check work per print., • Completes necessary job-related paperwork to include part identification, inspection documents, and production log., • Perform basic equipment maintenance: proper coolant levels, filters, fan operation, cleans machine, etc. EDUCATION AND EXPERIENCE • 2 Years - Setup and Operating Twin Spindle / Twin Turret, • 2 Years - Precision CNC Machining, • Experience with Fanuc Controls, • Ability to read, write, and speak English fluently. PHYSICAL JOB REQUIREMENTS • Regularly required to stand and reach the duration of shift, 8 hours., • Occasionally required to walk, sit, stoop, kneel, crouch, or bend., • Frequently required to perform repetitive or short-cycles work., • Regularly lift, push, or pull up to 10 pounds and occasionally up to 50 pounds., • Strong work ethic: Willing to work OT to meet tight deadlines as needed., • Understands and observes all necessary safety procedures: safety glasses, shoes, ear protection, machine interlocks, lifting guidelines, etc. as designated in specific work area assigned., • Must be able to communicate clearly and accurately in noisy environments., • Must also have close, distance, and peripheral vision, with the ability to adjust focus and judge depth. Color vision is required as well., • Must be able to read, write, and speak English. Compensation: $26-30 per hour OFFERING A $2,500 SIGN ON BONUS FOR MACHINISTS AT OUR TAMPA LOCATION! Due to ITAR regulations, only U.S. persons—defined as U.S. citizens, lawful permanent residents (Green Card holders), and U.S. nationals—are eligible for this position. *We are an Equal Employment Opportunity ("EEO") Employer. Applicants can learn more about Prince's status as an equal opportunity employer by viewing the federal "EEO is the Law" poster ( ) #indeedcnc

Job Description Who We Are Founded in 1959 by Ed Miller near Chicago, Prince Industries has grown from a one-man shop into a global manufacturing partner. With seven facilities across the U.S. and China, we serve industries from hydraulics to aerospace, handling everything from just-in-time components to high-volume assemblies. At Prince, we don’t just make parts—we solve complex supply chain challenges. We are a strategic partner, focused on helping clients improve products, reduce costs, and simplify operations. Certified to ISO 9001:2015, ISO 13485, and AS9100 standards, we combine quality, innovation, and growth-minded thinking to deliver real value. JOB SUMMARY Manufacturing Precision Metal Products on CNC Turning Centers. Qualified to operate Twin Spindle / Twin Turret machines manufactured by Eurotech and Mori Seiki. Machining metallic and nonmetallic workpieces for the Aerospace Industry by performing the following duties. OFFERING A $2,500 SIGN ON BONUS FOR MACHINISTS AT OUR TAMPA LOCATION! ESSENTIAL DUTIES AND RESPONSIBILITIES • Read and interpret process plans, and blueprints to determine necessary machining, dimensional specifications, and operating requirements., • Utilizes various types of inspection instruments to check work per print., • Completes necessary job-related paperwork to include part identification, inspection documents, and production log., • Perform basic equipment maintenance: proper coolant levels, filters, fan operation, cleans machine, etc. EDUCATION AND EXPERIENCE • 2 Years - Setup and Operating Twin Spindle / Twin Turret, • 2 Years - Precision CNC Machining, • Experience with Fanuc Controls, • Ability to read, write, and speak English fluently. PHYSICAL JOB REQUIREMENTS • Regularly required to stand and reach the duration of shift, 8 hours., • Occasionally required to walk, sit, stoop, kneel, crouch, or bend., • Frequently required to perform repetitive or short-cycles work., • Regularly lift, push, or pull up to 10 pounds and occasionally up to 50 pounds., • Strong work ethic: Willing to work OT to meet tight deadlines as needed., • Understands and observes all necessary safety procedures: safety glasses, shoes, ear protection, machine interlocks, lifting guidelines, etc. as designated in specific work area assigned., • Must be able to communicate clearly and accurately in noisy environments., • Must also have close, distance, and peripheral vision, with the ability to adjust focus and judge depth. Color vision is required as well., • Must be able to read, write, and speak English. Compensation: $26-30 per hour OFFERING A $2,500 SIGN ON BONUS FOR MACHINISTS AT OUR TAMPA LOCATION! Due to ITAR regulations, only U.S. persons—defined as U.S. citizens, lawful permanent residents (Green Card holders), and U.S. nationals—are eligible for this position. *We are an Equal Employment Opportunity ("EEO") Employer. Applicants can learn more about Prince's status as an equal opportunity employer by viewing the federal "EEO is the Law" poster ( ) #indeedcnc Second Shift- 3:30pm - 12:00am, Mon-Fri.

Job DescriptionCNC Operator – Manufacturing / Production Location: Westchase, FL (33626) Pay: $18–$25/hr, based on experience Schedule: Monday–Friday, 7:30 AM – 4:00 PM No overtime Position Overview We are seeking an experienced CNC Operator to set up, operate, and maintain CNC machinery in a fast-paced manufacturing environment. The ideal candidate has strong mechanical aptitude, attention to detail, and experience with CNC machining, tooling, and quality checks. Key Responsibilities Set up and operate CNC machines according to specifications Read and interpret blueprints, schematics, and work orders Perform machine adjustments, tool changes, and offsets Inspect finished parts using calipers, micrometers, and gauges Monitor machine performance and troubleshoot minor issues Maintain accurate production and quality records Follow all safety procedures and maintain a clean work area Collaborate with team members and supervisors to meet production goals Requirements Previous experience as a CNC Operator or Machinist Ability to read blueprints and technical drawings Knowledge of machining tools, feeds, speeds, and materials Ability to lift 40–50 lbs and stand for long periods Strong attention to detail and quality Reliable, punctual, and safety-focused Preferred Qualifications Experience with CNC mills, lathes, or both Familiarity with G-code or basic programming Experience in a manufacturing or machine-shop environment Ability to perform basic machine maintenance Apply Now If you have CNC experience and are looking for a stable, no-overtime schedule, apply now to be considered. #3379NW

Job Description HVAC Sheet Metal Fabricator – Precision Fabrication for Commercial HVAC Systems Job Overview: • Company: W J Bachman Mechanical Sheetmetal Co. of FL Inc., • Salary/Pay Rate: $35 – $40 per hour (Based on experience)., • Location: Tampa Bay, FL 33647., • Job/Employment Type: Full Time., • Schedule: Monday – Friday (Overtime and weekends as needed)., • Project Scope: Commercial HVAC / Mechanical., • Mandatory Licenses & Certifications: None Required. The Opportunity: You will serve as a master craftsman, transforming raw materials into the critical components that power complex commercial HVAC systems. Your technical precision in the shop ensures that every installation in the field meets the high standards our clients expect. This role offers the chance to grow within a family-oriented company that invests in your long-term career through paid training and certifications. How You Will Make an Impact: • Fabricate high-quality sheet metal components using shears, brakes, rollers, and specialized forming equipment., • Interpret complex blueprints and technical schematics to ensure every piece meets exact project specifications., • Operate CNC and manual machinery, including punch presses and lasers, to maintain high production standards., • Execute precise MIG, TIG, and stick welding to assemble durable sub-assemblies and final products., • Verify tolerances using precision instruments like calipers and micrometers to guarantee a perfect fit and finish., • Maintain a safe and organized shop environment by adhering to strict OSHA standards and PPE protocols., • Collaborate with engineers and project managers to troubleshoot fabrication issues and improve shop efficiency. Required Qualifications & Experience: • Minimum of 1–5 years of professional experience in a HVAC sheetmetal shop., • Proven proficiency operating shop equipment including shears, brakes, and welding tools., • Demonstrated ability to accurately read and interpret detailed blueprints and technical drawings., • High school diploma or equivalent., • Physical ability to lift, bend, and stand for extended periods in a mechanical shop environment. Preferred Qualifications & Experience: • Completion of a formal vocational training program or sheet metal apprenticeship., • Advanced knowledge of HVAC-specific fabrication and specialized mechanical systems., • Previous experience in a mentorship role or training junior fabricators on shop safety and technique. Compensation & Benefits: • Weekly pay cycle with year-end performance bonus eligibility., • Comprehensive paid time off including vacation, sick days, and holidays., • Personal tool replacement program and provided safety equipment., • Retirement savings program and referral bonus opportunities., • Access to paid training, professional certifications, and career advancement programs., • Relocation assistance and uniforms provided., • Travel project opportunities with per diem and mileage reimbursement. About Us: W J Bachman Mechanical Sheetmetal Co. of FL Inc. is a premier name in commercial HVAC solutions, built on a foundation of precision and integrity. We foster a supportive, family-oriented culture where individual accountability is rewarded with long-term growth and stability. Learn more at www.wjbachman.com. W J Bachman Mechanical Sheetmetal Co. of FL Inc. is an Equal Opportunity Employer and does not discriminate on the basis of race, color, religion, sex (including pregnancy, gender expression, and sexual orientation), parental status, national origin, age, disability, genetic information (including family medical history), political affiliation, military service, or any other status protected by law or regulations. It is our intention that all qualified applicants be given equal opportunity and that selection decisions be based on job-related factors. #OHFC25

Job DescriptionCNC Machinist Shift and Pay: 1st shift : 7 am - 3:30 pm 2nd shift : 3:30 pm - 12 am *Both shifts are Monday through Friday $27- $33/hr based on experience MUST HAVE : Set up experience on either a 5 axis mill, twin spindle or twin turret lathe machine Responsibilities • Set up/operate 3–5 axis CNC mills & lathes (twin spindle/turret, mill-turn), • Run and monitor programs; make minor M & G code edits, • Read blueprints and hold tight tolerances, • Adjust offsets, speeds, feeds to maintain quality, • Troubleshoot tooling, finish, and dimensional issues Qualifications • Multi-axis CNC setup experience (mill or lathe), • Experience with 5-axis and twin spindle equipment, • Able to read programs (Mastercam, Fusion, etc.), • Strong blueprint & GD&T knowledge Job Type & Location This is a Contract to Hire position based out of Tampa, FL. Pay and Benefits The pay range for this position is $30.00 - $35.00/hr. Eligibility requirements apply to some benefits and may depend on your job classification and length of employment. Benefits are subject to change and may be subject to specific elections, plan, or program terms. If eligible, the benefits available for this temporary role may include the following: • Medical, dental & vision, • Critical Illness, Accident, and Hospital, • 401(k) Retirement Plan – Pre-tax and Roth post-tax contributions available, • Life Insurance (Voluntary Life & AD&D for the employee and dependents), • Short and long-term disability, • Health Spending Account (HSA), • Transportation benefits, • Employee Assistance Program, • Time Off/Leave (PTO, Vacation or Sick Leave) Workplace Type This is a fully onsite position in Tampa,FL. Application Deadline This position is anticipated to close on Jul 24, 2026. About Aerotek Aerotek® Inc. provides staffing and services solutions in manufacturing, logistics, construction, aviation, facilities and maintenance. We provide the expertise, solutions and people required to rise to the challenges of North American industry. Headquartered in Hanover, Md., Aerotek operates a unified network of over 200 offices across North America, supporting more than 18,000 clients each year. Aerotek is an Allegis Group company, the global leader in workforce and business solutions. To learn more, visit: Aerotek.com | 1-888-AEROTEK. Aerotek offers weekly pay, employee benefits including medical, dental & vision, life insurance, health advocacy and employee assistance programs, a 401(k) plan, and employee discounts. The company is an equal opportunity employer and will consider all applications without regards to race, sex, age, color, religion, national origin, veteran status, disability, sexual orientation, gender identity, genetic information or any characteristic protected by law. San Francisco Fair Chance Ordinance: Pursuant to the San Francisco Fair Chance Ordinance, for all positions located in the city and county of San Francisco, we will consider for employment qualified applicants with arrest and conviction records. Massachusetts Lie Detector: It is unlawful in Massachusetts to require or administer a lie detector test as a condition of employment or continued employment. An employer who violates this law shall be subject to criminal penalties and civil liability. Use of Artificial Intelligence (AI): We may use Artificial Intelligence (AI) to support parts of our hiring process, including sourcing, screening, and evaluating candidates. AI helps assess applications and qualifications, but final decisions are made by our hiring team. By applying, you acknowledge and agree that your application may be reviewed using AI tools. Company DescriptionWe know that finding work is hard, and finding meaningful work is harder. Aerotek connects 180,000+ light industrial and skilled trades workers with 14,000+ employers each year, helping our workers navigate an evolving labor market and find jobs that meet their goals, skills, and interests. Since 1983, we have provided a variety of career opportunities across North American industry – from short-term assignments at Fortune 500 companies where you can build your skills, to long-term opportunities where you can play a vital role in solving companies’ construction, manufacturing, and maintenance challenges. Our 1,500+ experienced recruiters across 250+ offices work relentlessly to put our workforce in a position to thrive. Let us rise to meet your challenges and put our people-are-everything spirit to the test as your career continues to grow.We know that finding work is hard, and finding meaningful work is harder. Aerotek connects 180,000+ light industrial and skilled trades workers with 14,000+ employers each year, helping our workers navigate an evolving labor market and find jobs that meet their goals, skills, and interests. Since 1983, we have provided a variety of career opportunities across North American industry – from short-term assignments at Fortune 500 companies where you can build your skills, to long-term opportunities where you can play a vital role in solving companies’ construction, manufacturing, and maintenance challenges. Our 1,500+ experienced recruiters across 250+ offices work relentlessly to put our workforce in a position to thrive. Let us rise to meet your challenges and put our people-are-everything spirit to the test as your career continues to grow.

Job Description Job Summary: This job description includes the safe operations of the Kinetics, MG, Peddinghaus, FICEP, and other automatic and semi-automatic burn table equipment. Essential Functions: • Support all TTI/FSS Company and OSHA Safety Policies to ensure they are followed., • Required to assist in locating correct job material and make sure it is brought into the facility or operate a forklift, • Operate overhead crane or forklifts to offload from the machine the cut to specification materials and drop materials, • Make sure all torches are in place on the burning machine and at times walk beside the moving machine to ensure quality and safe operations., • Align the material with laser and CNC equipment. Occasionally must get up on the table to ensure the alignment is in place., • Operator is then ready to start the burning process which could take up to 2-1/2 hours; during this entire process, the operator must walk beside the moving machine to ensure quality/safe operations, • Must be able to read and follow all cut/nest sheets correctly and ensure that they are working with the correct grades, alloys, and sizes before making any cuts on the material, • Mark all cut parts with correct job numbers, heat numbers, and/or part numbers to ensure correct traceability, • Operators are tasked to palletize materials as required Additional Duties: • Must be able to read and follow all cut/nest sheets correctly and ensure that they are working with the correct grades, alloys, and sizes before making any cuts on the material. Quality Standards • Report all maintenance issues to proper management., • Maintain cleanliness and effective/safe operation of their assigned equipment. Teamwork Teamwork is essential in this position and the CNC Burn Table Operator must have a positive attitude and be able to work effectively with all departments, managers, and staff. Actively participate in Safety meetings and promote company safety culture while working closely with the safety department. Qualifications • No additional qualifications Education and/or Experience • High School Diploma, • 2 years’ experience required in CNC operation and or large/heavy steel fabrication table operation. (Both Preferred) Language Skills Must be able to communicate in a professional manner with co-workers, other departments, and managers. Reporting This position reports directly to the facility’s automated equipment supervisor and associated shop superintendent. Powered by JazzHR nDjHBAtgS8

Job Description 2nd Shift - 20% Pay Premium Weekend day Shift - 20% Pay Premium Weekend 2nd Shift - 40% Pay Premium Sets up and operates various CNC machines and manual equipment. Inspect parts and document quality results. · Independently setup complex jobs on 3 to 5 axis CNC Machines · Operate 3 to 5 axis CNC Machines · Ensure the necessary quality throughout the production run by inspecting and documenting the quality results · Ensure cycle times are adhered to · Prove out, de-bug and give feedback on CNC programs · Document how jobs are setup, run and inspected as thoroughly as possible · Setup and operate secondary operations when cycle time of your primary machine allows · Setup and operate manual equipment as necessary · Monitor the work of operators assigned to you · Provide on-the-job training · Perform routine maintenance on machines and equipment · Collaborate with others to resolve any problems · Follow all procedures and alert your supervisor if procedures may need reviewed/updated · Maintain a safety, clean, and orderly work environment · Other duties as assigned EDUCATION and/or EXPERIENCE · High school diploma or equivalent required · Degree or certification from a technical school; or two to three years related experience and/or training; or equivalent combination of education and experience. · 5+ years’ experience setting up and running precision machined components required · Prefer experience machining Aerospace components · Thorough knowledge of blueprint reading required · Thorough knowledge of GD&T required · Strong math skills required Company DescriptionSMT specializes in precision machined components and assemblies primarily for the aircraft, aerospace, and defense industries. We have 21 CNC machines, including 6 horizontal mills (3 of which are on a 23 pallet FMS and 1 has its own 6 pallet system), 1 high speed, 4-axis, vertical mill, 4 vertical mills with capability up to fifth axis positioning, and 8 lathes (some with live tooling). Our 2 most advanced CNC lathes are twin spindle, have twin Y axis turrets with live tooling, and are in a cell with a Fanuc robot. Some of our niche capabilities include: -Complex internal and external deburring and finishing under 10-40x magnification -Process to create precision .0005" tolerance bores with less than 16 microfinish, and 11 sigma capability -Precision surface treatment applications that eliminate the need for masking when parts require a combination of anodize and chemfilm, which results in clear and consistent edges every time.SMT specializes in precision machined components and assemblies primarily for the aircraft, aerospace, and defense industries.\r\nWe have 21 CNC machines, including 6 horizontal mills (3 of which are on a 23 pallet FMS and 1 has its own 6 pallet system), 1 high speed, 4-axis, vertical mill, 4 vertical mills with capability up to fifth axis positioning, and 8 lathes (some with live tooling). Our 2 most advanced CNC lathes are twin spindle, have twin Y axis turrets with live tooling, and are in a cell with a Fanuc robot.\r\nSome of our niche capabilities include:\r\n-Complex internal and external deburring and finishing under 10-40x magnification\r\n-Process to create precision .0005" tolerance bores with less than 16 microfinish, and 11 sigma capability\r\n-Precision surface treatment applications that eliminate the need for masking when parts require a combination of anodize and chemfilm, which results in clear and consistent edges every time.

Job Description CNC Lathe/Mill Programmer and Machinist Lightning Bay PneuDraulics is a well-established Industrial, Marine and Mining Maintenance, service company, Specializing in Hydraulics. We have an immediate career opening for a CNC Lathe/Mill Programmer and Machinist Come join a winning team in Tampa! We are looking for an experienced CNC Lathe/Mill Programmer and Machinist. We are a Full service Hydraulic and Mechanical Repair company. We specialize in Hydraulic repair and manufacturing. The perfect candidate must be highly experienced with Haas CNC machine tools and Fusion 360 software. We service some of the largest Ships, Amusement Parks, Mining operations and manufacturing companies in the world. This individual must be capable and comfortable designing and manufacturing products that are up to the quality and standard that we are known for. Roles and Responsibilities · Use Fusion 360 for Drawing and Programming of Haas Lathes and Mills · Draw new parts as required · Reverse Engineer parts as required · Create NC Programs for Lathes with Y-Axis/Live Tooling and Mills with 3, 4 and 5 Axis · Perform Set-Up and Fixturing as required · Run Programs and Operate machines as required Qualifications and Experience · 10+ years Experience with Programming Using CAD/CAM Systems · Must be highly proficient with Fusion 360 · Must be highly proficient with Haas Control and Machines · Must be highly proficient with Y-Axis & Live Tooling · Must be highly proficient with 4 & 5 Axis Milling WHY YOU'LL LOVE WORKING FOR US (OUR BENEFITS) · Competitive salary, based on experience and qualifications · Full medical, dental and vision coverage · Retirement savings account with a company match · Long and short term disability · Paid vacation and paid sick time · Uniforms and uniform laundry Hiring Company Description: Lightning Bay Pneu-Draulics is a leading provider of Industrial and Marine Hydraulic Services. Based in Tampa, FL. We provide shop and field service to our customers to troubleshoot, install, remanufacture, and design fluid power systems and components. Our shop capabilities include full machining and fabrication and the ability to remanufacture and test equipment for our customers. Some industries that we serve include: marine, mining, manufacturing, fertilizer and chemical, food and beverage, and metal processing. Company DescriptionLightning Bay Pneu-Draulics is a leading provider of Industrial and Marine Hydraulic Services. Based out of Tampa, FL. We provide shop and field service to our customers and troubleshoot, install, remanufacture, or design fluid power systems and components. Our shop capabilities includes full machining and fabrication and the ability to remanufacture and test equipment for our customers. Some industries that we serve include: marine, mining, manufacturing, fertilizer and chemical, food and beverage, and metal processing.Lightning Bay Pneu-Draulics is a leading provider of Industrial and Marine Hydraulic Services. Based out of Tampa, FL. We provide shop and field service to our customers and troubleshoot, install, remanufacture, or design fluid power systems and components. Our shop capabilities includes full machining and fabrication and the ability to remanufacture and test equipment for our customers. Some industries that we serve include: marine, mining, manufacturing, fertilizer and chemical, food and beverage, and metal processing.

Job DescriptionJob Title: CNC Machine Operator Job Description This role operates CNC mills and lathes to produce high-quality parts in a precision manufacturing environment. You will set up and run multi-axis machines, interpret blueprints, perform in-process inspections, and make minor adjustments to ensure consistent quality and efficiency. The position requires strong attention to detail, a commitment to safety, and the ability to follow established work instructions and procedures. Responsibilities • Operate CNC mills and lathes according to established work instructions and production schedules., • Load and unload raw materials and finished parts from CNC machines safely and efficiently., • Read and interpret blueprints, manufacturing drawings, and work orders to understand part specifications and tolerances., • Perform in-process inspections using calipers, micrometers, gauges, and other precision measuring tools to verify part dimensions., • Monitor part quality and machine performance throughout production runs and take appropriate action when deviations occur., • Make simple tool wear adjustments and offset changes as instructed to maintain part accuracy and quality., • Make minor adjustments to G and M codes as needed, without performing full programming., • Complete required production and quality documentation accurately and on time., • Maintain a clean, organized, and safe work area in accordance with company standards., • Follow all company safety, quality, and operational procedures at all times., • Collaborate with team members and supervisors to resolve issues and improve processes., • Support continuous improvement efforts by identifying opportunities to enhance productivity and quality.Essential Skills, • Previous CNC machine operating experience (required)., • Ability to operate 3-, 4-, or 5-axis CNC lathes or mills as an operator., • Ability to read and interpret blueprints and manufacturing drawings., • Experience using precision measuring equipment such as calipers, micrometers, and gauges., • Ability to perform basic tool wear and offset adjustments on CNC machines., • Ability to make minor adjustments to G and M codes (no programming required)., • Strong attention to detail and commitment to producing high-quality work., • Ability to stand for extended periods and work in a manufacturing environment., • Reliable attendance and willingness to work overtime as needed., • Ability to follow detailed work instructions and safety procedures.Additional Skills & Qualifications, • Interest in growing within a precision machining and manufacturing environment., • Willingness to participate in apprenticeship or training programs to expand skills., • Comfort working both independently at a dedicated station and as part of a team., • Strong communication skills to coordinate with coworkers and supervisors., • Mechanical aptitude and a desire to learn more about CNC machining and related processes.Why Work Here? Employees benefit from a comprehensive package that supports both financial security and professional growth. The organization offers medical, dental, and vision insurance, as well as disability coverage to help protect you and your family. Long-term financial wellbeing is supported through a 401(k) retirement plan with company match and a Roth IRA option with matching contributions. Time away from work is valued through a Paid Time Off (PTO) program. Employees share in the company’s success through a profit sharing program, while tuition reimbursement and an apprenticeship program help you develop new skills and advance your career. The culture emphasizes career growth, advancement opportunities, and a supportive environment where continuous learning is encouraged. Work Environment The role is based in an indoor, slightly air-conditioned machine shop designed for precision manufacturing. You will work as part of a team of approximately 34 people in a collaborative, teamwork-focused environment, while maintaining your own dedicated station or area for machining. The shop environment includes CNC mills and lathes and requires standing for extended periods and working around active production equipment. The setting emphasizes organization, cleanliness, and adherence to safety procedures to ensure a safe and efficient workplace. Job Type & Location This is a Permanent position based out of Tampa, FL. Pay and Benefits The pay range for this position is $54080.00 - $62400.00/yr. Medical insurance Dental insurance Vision insurance Disability insurance 401(k) retirement plan with company match Roth IRA retirement plan with matching Paid Time Off (PTO) Profit Sharing Program Tuition Reimbursement Program Apprenticeship Program Career growth and advancement opportunities Workplace Type This is a fully onsite position in Tampa,FL. Application Deadline This position is anticipated to close on Jul 24, 2026. About Aerotek Aerotek® Inc. provides staffing and services solutions in manufacturing, logistics, construction, aviation, facilities and maintenance. We provide the expertise, solutions and people required to rise to the challenges of North American industry. Headquartered in Hanover, Md., Aerotek operates a unified network of over 200 offices across North America, supporting more than 18,000 clients each year. Aerotek is an Allegis Group company, the global leader in workforce and business solutions. To learn more, visit: Aerotek.com | 1-888-AEROTEK. Aerotek offers weekly pay, employee benefits including medical, dental & vision, life insurance, health advocacy and employee assistance programs, a 401(k) plan, and employee discounts. The company is an equal opportunity employer and will consider all applications without regards to race, sex, age, color, religion, national origin, veteran status, disability, sexual orientation, gender identity, genetic information or any characteristic protected by law. San Francisco Fair Chance Ordinance: Pursuant to the San Francisco Fair Chance Ordinance, for all positions located in the city and county of San Francisco, we will consider for employment qualified applicants with arrest and conviction records. Massachusetts Lie Detector: It is unlawful in Massachusetts to require or administer a lie detector test as a condition of employment or continued employment. An employer who violates this law shall be subject to criminal penalties and civil liability. Use of Artificial Intelligence (AI): We may use Artificial Intelligence (AI) to support parts of our hiring process, including sourcing, screening, and evaluating candidates. AI helps assess applications and qualifications, but final decisions are made by our hiring team. By applying, you acknowledge and agree that your application may be reviewed using AI tools. Company DescriptionWe know that finding work is hard, and finding meaningful work is harder. Aerotek connects 180,000+ light industrial and skilled trades workers with 14,000+ employers each year, helping our workers navigate an evolving labor market and find jobs that meet their goals, skills, and interests. Since 1983, we have provided a variety of career opportunities across North American industry – from short-term assignments at Fortune 500 companies where you can build your skills, to long-term opportunities where you can play a vital role in solving companies’ construction, manufacturing, and maintenance challenges. Our 1,500+ experienced recruiters across 250+ offices work relentlessly to put our workforce in a position to thrive. Let us rise to meet your challenges and put our people-are-everything spirit to the test as your career continues to grow.We know that finding work is hard, and finding meaningful work is harder. Aerotek connects 180,000+ light industrial and skilled trades workers with 14,000+ employers each year, helping our workers navigate an evolving labor market and find jobs that meet their goals, skills, and interests. Since 1983, we have provided a variety of career opportunities across North American industry – from short-term assignments at Fortune 500 companies where you can build your skills, to long-term opportunities where you can play a vital role in solving companies’ construction, manufacturing, and maintenance challenges. Our 1,500+ experienced recruiters across 250+ offices work relentlessly to put our workforce in a position to thrive. Let us rise to meet your challenges and put our people-are-everything spirit to the test as your career continues to grow.

Job Description CNC Operator Shift and Pay: 2nd shift: 2 pm - 10 pm 3rd shift : 10 pm - 6 am *Both shifts are Monday through Friday $24-30/hr based on experience We are seeking a dependable Machine Operator with experience running CNC lathe and/or mill machines. This position is ideal for candidates who have operated machining equipment but do not have machine setup experience. The right candidate will be responsible for loading parts, monitoring machine operations, performing basic quality checks, and maintaining production standards in a manufacturing environment. Responsibilities • Operate lathe and/or mill machines according to established procedures., • Load and unload materials and parts., • Monitor machine performance during production runs., • Inspect finished products using basic measuring tools and visual inspection techniques., • Follow work instructions, blueprints, and safety guidelines., • Maintain a clean and organized work area., • Report equipment issues or quality concerns to supervisors.Qualifications, • Previous experience operating lathe or mill machines required., • Setup experience is not required., • Ability to use basic measuring tools such as calipers, micrometers, or gauges is a plus., • Ability to read work instructions and follow production procedures., • Strong attention to detail and quality., • Ability to stand for extended periods and lift up to 50 lbs., • Reliable attendance and strong work ethic. Job Type & Location This is a Contract to Hire position based out of Tampa, FL. Pay and Benefits The pay range for this position is $30.00 - $35.00/hr. Eligibility requirements apply to some benefits and may depend on your job classification and length of employment. Benefits are subject to change and may be subject to specific elections, plan, or program terms. If eligible, the benefits available for this temporary role may include the following: • Medical, dental & vision, • Critical Illness, Accident, and Hospital, • 401(k) Retirement Plan – Pre-tax and Roth post-tax contributions available, • Life Insurance (Voluntary Life & AD&D for the employee and dependents), • Short and long-term disability, • Health Spending Account (HSA), • Transportation benefits, • Employee Assistance Program, • Time Off/Leave (PTO, Vacation or Sick Leave) Workplace Type This is a fully onsite position in Tampa,FL. Application Deadline This position is anticipated to close on Jul 24, 2026. About Aerotek Aerotek® Inc. provides staffing and services solutions in manufacturing, logistics, construction, aviation, facilities and maintenance. We provide the expertise, solutions and people required to rise to the challenges of North American industry. Headquartered in Hanover, Md., Aerotek operates a unified network of over 200 offices across North America, supporting more than 18,000 clients each year. Aerotek is an Allegis Group company, the global leader in workforce and business solutions. To learn more, visit: Aerotek.com | 1-888-AEROTEK. Aerotek offers weekly pay, employee benefits including medical, dental & vision, life insurance, health advocacy and employee assistance programs, a 401(k) plan, and employee discounts. The company is an equal opportunity employer and will consider all applications without regards to race, sex, age, color, religion, national origin, veteran status, disability, sexual orientation, gender identity, genetic information or any characteristic protected by law. San Francisco Fair Chance Ordinance: Pursuant to the San Francisco Fair Chance Ordinance, for all positions located in the city and county of San Francisco, we will consider for employment qualified applicants with arrest and conviction records. Massachusetts Lie Detector: It is unlawful in Massachusetts to require or administer a lie detector test as a condition of employment or continued employment. An employer who violates this law shall be subject to criminal penalties and civil liability. Use of Artificial Intelligence (AI): We may use Artificial Intelligence (AI) to support parts of our hiring process, including sourcing, screening, and evaluating candidates. AI helps assess applications and qualifications, but final decisions are made by our hiring team. By applying, you acknowledge and agree that your application may be reviewed using AI tools. Company DescriptionWe know that finding work is hard, and finding meaningful work is harder. Aerotek connects 180,000+ light industrial and skilled trades workers with 14,000+ employers each year, helping our workers navigate an evolving labor market and find jobs that meet their goals, skills, and interests. Since 1983, we have provided a variety of career opportunities across North American industry – from short-term assignments at Fortune 500 companies where you can build your skills, to long-term opportunities where you can play a vital role in solving companies’ construction, manufacturing, and maintenance challenges. Our 1,500+ experienced recruiters across 250+ offices work relentlessly to put our workforce in a position to thrive. Let us rise to meet your challenges and put our people-are-everything spirit to the test as your career continues to grow.We know that finding work is hard, and finding meaningful work is harder. Aerotek connects 180,000+ light industrial and skilled trades workers with 14,000+ employers each year, helping our workers navigate an evolving labor market and find jobs that meet their goals, skills, and interests. Since 1983, we have provided a variety of career opportunities across North American industry – from short-term assignments at Fortune 500 companies where you can build your skills, to long-term opportunities where you can play a vital role in solving companies’ construction, manufacturing, and maintenance challenges. Our 1,500+ experienced recruiters across 250+ offices work relentlessly to put our workforce in a position to thrive. Let us rise to meet your challenges and put our people-are-everything spirit to the test as your career continues to grow.

Job Description Title: Service Engineer Reports to: Service Coordinator Location: Tampa, FL or adjacent areas Hours: Monday through Friday, 8:00am to 5:00pm Classification: Non Exempt Travel: 50% Salary Range: $85,000+ (variance in base salary offer will depend on experience level/skill set) Employment is conditioned on DMG MORI's ability to obtain and maintain any necessary export licensing. Service Engineers are expected to provide customers with maintenance and repair assistance of DMG MORI CNC machine tools on location or by telephone. Essential Job Functions: To perform this job successfully, an individual must be able to perform each essential function satisfactorily. The requirements listed below are representative of the knowledge, skills, and abilities required. Reasonable accommodations may be made to enable qualified individuals with disabilities to perform the essential functions. Responsibilities include up to and not limited to: • Provide customers with maintenance, repair, and installation assistance of DMG MORI CNC machine tools on location or by telephone., • Creating and updating documentation of technical information., • Developing, preparing, generating, and analyzing ongoing and ad-hoc special reports pertaining to Service, • Demonstrating a willingness to help others and be a team member; often working together with Customer’s Service Engineers., • Providing assistance and training to Customer’s Service Engineers on the installation and maintenance of newer product lines., • Establish and build exemplary communication and customer service relationships with customers., • Manage difficult customer situations in a positive manner, respond promptly to customer needs and solicit customer feedback to improve service., • Other duties as assigned. Minimum Requirements: • Bachelors or Associates Degree in technical related field of study preferred., • 3-5 years of experience in electrical and mechanical troubleshooting and maintenance of CNC machine tools., • Experience working with DMG or MORI SEIKI machines, Fanuc, Mitsubishi, and/or Siemens and controls are a PLUS., • Good verbal and written communication skills with exceptional customer service orientation., • Must be able to interact and effectively communicate in person and over the phone with people at all levels of an organization., • Proven ability to read mechanical drawings, electrical schematics, and sequence (PLC) ladder diagrams., • Basic computer literacy and working knowledge of MS Word, Excel, and Outlook., • Must be adaptable to changes in the work environment; manage competing demands and able to deal with frequent change, delays or unexpected events., • Minimum of 50% travel in multi-state region; drive or fly depending on distance. Employee is expected to work at the Technical Center when not visiting customers. Work Environment: Exposure to manufacturing/machining environments which may present possible hazards such as noise, electricity, chemicals, heavy equipment, and other automated and manual machinery. General office environment experienced at DMG MORI office. Physical Demands: Frequent: Travel, operating a vehicle, sitting, standing, walking, bending, squatting, stooping, and reaching. Pushing, pulling, and lifting objects. Repetitive foot, leg, hand, arm, shoulder, and torso movements. Periodic: Operating power equipment, sitting at desk, utilizing computers and phones. Occasional: Lifting or moving up to 50lbs. We are an Equal Opportunity Employer. We maintain a drug-free workplace and perform pre-employment substance abuse screening

Job Description Job Summary: The role of this position is to create programs for the CNC Plasma and Flame-cutting machines utilizing part nesting software. The CNC Programmer position will grow and change as the department does. Essential Functions: • Support all TTI/FSS Company Safety Policies to ensure they are followed, and personnel and property are kept safe, • Read technical drawings and guide in the set-up of machines in accordance with these blueprints, • Use computer software to model cutting paths and program machines accordingly, • Program and oversee quality assurance tests to ensure products meet design specifications, • Adjust machine cutting paths or settings to optimize production while maintaining quality, • Consider tools required to cut materials and program machines accordingly, • Troubleshoot and resolve problems with the machines as they arise Additional Duties: • Additional responsibilities or duties may be required as needed in support of company operations. Teamwork: Teamwork is essential in this position and the Programmer must have a positive attitude and be able to work effectively with all departments, managers, and staff Actively promote company safety culture with the team Qualifications: • An individual must be able to perform each essential duty above average and always represent the company in a professional manner. The requirements listed are representative of the minimum knowledge, skill, and/or ability required., • Minimum 3 years’ previous experience working in a steel manufacturing setting is required, • Must have strong attention to detail, • Ability to read and interpret technical drawings and blueprints, • Strong mechanical aptitude is required, • Skilled at troubleshooting and resolving problems that arise, • Ability to work independently and closely follow directions is essential, • Should have a positive and professional attitude, • Capable of working in a shop environment for periods of time, • Adhere to all safety requirements and protocols Education and/or Experience • High School Diploma Language Skills Must be able to communicate professionally and effectively with co-workers, other departments, and managers. Reporting Reports to Pre-fab Manager and works with the operations team as well as Burn Table Foreman. Powered by JazzHR BnaKXQTPrY

Job Description WHO WE ARE Founded in 1959 by Ed Miller near Chicago, Prince Industries has grown from a one-man shop into a global manufacturing partner. With seven facilities across the U.S. and China, we serve industries from hydraulics to aerospace, handling everything from just-in-time components to high-volume assemblies. At Prince, we don’t just make parts—we solve complex supply chain challenges. We are a strategic partner, focused on helping clients improve products, reduce costs, and simplify operations. Certified to ISO 9001:2015, ISO 13485, and AS9100 standards, we combine quality, innovation, and growth-minded thinking to deliver real value. Position Summary The Aerospace CNC Manufacturing Programmer / Engineer is responsible for developing, optimizing, and supporting CNC machining processes for precision aerospace components. This role ensures programs, tooling, and manufacturing methods meet aerospace quality and tolerance requirements while driving operational efficiency, repeatability, and cost reduction. The individual partners with production, quality, and operations to deliver robust, manufacturable solutions that support on-time, high-quality production. OFFERING A $2,500 SIGN ON BONUS FOR MACHINISTS AT OUR TAMPA LOCATION! CNC Programming & Process Development • Develop, validate, and optimize CNC programs for lathes, mill-turn, 3-, 4-, and 5-axis mill equipment using industry-standard CAM software (e.g., Mastercam, Fusion 360)., • Create detailed machining processes, toolpaths, and cutting strategies tailored for aerospace alloys (e.g., Inconel, stainless steel, aluminum)., • Conduct simulation, verification, and prove-outs to ensure safe and efficient machine operation., • Establish machining parameters, feeds/speeds, work holding setups, and tooling selections using best-practice principles. Manufacturing Engineering • Develop and maintain process documentation, including setup sheets, fixture drawings, and work instructions., • Lead process improvements focused on cycle time reduction, tool life extension, and quality enhancement., • Support new parts and ensure manufacturability of customer designs., • Design or specify custom fixtures, tooling, and work holding to support complex aerospace geometries., • Collaborate with Quality to resolve non-conformances and drive root-cause analysis (5 Whys, Fishbone, 8D). Technical Support & Shop Floor Collaboration • Support machinists during setups, first-article inspections, and program prove-outs., • Participate in MRB and continuous improvement to address production challenges., • Train operators and setup personnel on new processes, tooling, and programming methods. Compliance & Documentation • Ensure all machining processes comply with AS9100, customer specifications, and aerospace drawing requirements., • Maintain revision-controlled documents and ensure alignment between programming data, job travelers, and quality records., • Embrace and integrate 5S, lean manufacturing, and mistake-proofing (poka-yoke) initiatives. Required Qualifications • 3–7+ years of CNC programming or manufacturing engineering experience, preferably in aerospace machining., • Proficiency in CAM software (Fusion 360, Mastercam preferred or equivalent)., • Strong knowledge of GD&T, blueprint interpretation, and aerospace documentation practices., • Experience machining tight-tolerance components (±0.0005” typical) and complex 3D surfaces., • Understanding of machining dynamics, tool selection, chip loads, and metal cutting theory., • Hands-on experience with CNC mills and lathes for troubleshooting and program optimization., • Working knowledge of AS9100, AS9102, and aerospace customer requirements. Preferred Qualifications • Associate or bachelor’s degree in manufacturing engineering, Mechanical Engineering, or related field., • Background with ERP/MRP systems (E2/JobBOSS, Epicor, etc.). Physical Job Requirements • Regularly required to sit, stand, or walk the duration of the shift, 8-10 hours., • Occasionally required to lift, push, or pull up to 30 lbs., • Frequently required to sit, stoop, kneel reach or bend., • Regularly exposed to moving machine parts when in plant., • Must be able to communicate clearly and accurately in noisy environments., • Must also have close, distance, and peripheral vision, with the ability to adjust focus and judge depth. Color vision is required as well., • Must be able to read, write, and speak English. Benefits • Blue Cross Blue Shield Medical insurance (PPO and HDHP with HSA) w/ Prescription Coverage., • Dental PPO Insurance, • Vision PPO Insurance, • Short-Term & Long-Term Disability Insurance, • Company Paid Life Insurance and AD & D – Including options to add on additional life insurance for yourself, spouse & children., • Critical Illness Insurance, • Accident Insurance, • 401(k) Fidelity Plan with strong employer match, • Personal Retirement Advisor, • Generous PTO Policy and 9 Paid Holidays per year, • 100% Tuition Reimbursement for Job-Related Classes, • Personal Protective Equipment reimbursement (safety glasses, shoes, etc.), • Uniform Rental Service, • Employee Events Compensation: $35-40 per hour OFFERING A $2,500 SIGN ON BONUS FOR MACHINISTS AT OUR TAMPA LOCATION! Due to ITAR regulations, only U.S. persons—defined as U.S. citizens, lawful permanent residents (Green Card holders), and U.S. nationals—are eligible for this position. *We are an Equal Employment Opportunity ("EEO") Employer. Applicants can learn more about Prince's status as an equal opportunity employer by viewing the federal "EEO is the Law" poster ( https://www.eeoc.gov/employers ) #indeedcnc

Job Description WHO WE ARE Founded in 1959 by Ed Miller near Chicago, Prince Industries has grown from a one-man shop into a global manufacturing partner. With seven facilities across the U.S. and China, we serve industries from hydraulics to aerospace, handling everything from just-in-time components to high-volume assemblies. At Prince, we don’t just make parts—we solve complex supply chain challenges. We are a strategic partner, focused on helping clients improve products, reduce costs, and simplify operations. Certified to ISO 9001:2015, ISO 13485, and AS9100 standards, we combine quality, innovation, and growth-minded thinking to deliver real value. JOB SUMMARY The CMM Mechanical Quality Inspector - 2nd Shift will use various inspection methods and tools to ensure product and process compliance with customer, company, and regulatory standards, including AS9100 requirements. Key Responsibilities • First Article Inspections and the overall conformity of our products., • Assures customer satisfaction by measuring product conformity to Customer Specifications and Engineering Drawings., • Upholds Prince’s Core Values and our AS9100 D Quality Management System, • Process inspections utilizing Coordinate Measuring Machines and all inspection hand gauging including but not limited to, micrometers, thread gauges, dial indicators, calipers, height gauges, etc., • Maintains a safe and clean work environment by following guidelines and procedures and complying with all applicable regulations., • Performs other duties as assigned.Required Skills & Competencies, • Robust knowledge of GD&T, blueprint, and spec interpretation., • Excellent organizational skills and attention to detail., • Strong analytical and problem-solving skills., • Experience operating/programming CMM, • Fundamental mechanical and mathematical inspection knowledge., • Proficient with Microsoft Office Suite or related software., • Ability to perform all the Mechanical Quality Inspection responsibilities. Education and Experience • AS9100 D Quality Management System – Trained., • Geometric Characteristic, GD&T - Trained., • 5 years’ experience in precision aerospace CNC machined products., • High school diploma or GED required. Physical & Work Environment Requirements • Regularly required to stand and reach the duration of shift, 8-10 hours., • Occasionally required to walk, sit, stoop, kneel, crouch, or bend., • Frequently required to perform repetitive or short-cycles work., • Regularly lift, push, or pull up to 10 pounds and occasionally up to 50 pounds., • Understands and observes all necessary safety procedures: safety glasses, shoes, ear protection, machine interlocks, lifting guidelines, etc. as designated in specific work area assigned., • Strong work ethic: Willing to work OT to meet tight deadlines as needed. Benefits • Paid vacation and holidays (9 per year), • Medical, Dental, & Vision Plans, • Short and Long Term Disability Plans, • 401(k) Retirement Plan with strong employer match, • Company paid life insurance & AD&D, • 100% tuition reimbursement for job relation classes, • PPE reimbursement, • Your specific benefits package will depend on your position, location, and years of service with Prince Due to ITAR regulations, only U.S. persons—defined as U.S. citizens, lawful permanent residents (Green Card holders), and U.S. nationals—are eligible for this position. *We are an Equal Employment Opportunity ("EEO") Employer. Applicants can learn more about Prince's status as an equal opportunity employer by viewing the federal "EEO is the Law" poster ( https://www.eeoc.gov/employers ) #indeedcnc

Job Description 2nd Shift - 20% Pay Premium Weekend day Shift - 20% Pay Premium Weekend 2nd Shift - 40% Pay Premium SUMMARY A Dimensional Quality Assurance Inspector will perform visual and dimensional inspections on precision machined components and assemblies to ensure product meets quality standards. Components will be inspected to blueprints, engineering drawings, industry standards, and specifications. PRIMARY DUTIES & RESPONSIBILITIES: • Visually and dimensionally inspect precision machined components utilizing a variety of measuring instruments and gages, such as calipers, micrometers, micro-hites, optical comparator’s, CMM’s, etc., • Inspect parts that are in-process, at receiving, and at final inspection to ensure quality., • Work from verbal or written instructions, quality standards, and/or other quality documentation., • Initiate and maintain a positive interaction between quality and production personnel., • Maintain inspection records and documentation., • Initiate corrective action requests., • Provide on-the-job training., • Maintain equipment in a clean manner and ensure that all equipment is handled and stored properly such that it will be protected from damage when not in use., • Adhere to all company procedures and policies., • Other duties as assigned. EDUCATION and/or EXPERIENCE • High school diploma or equivalent required, • At least 5 years’ experience performing mechanical inspection in a precision machining environment., • Capable of using a variety of gages, including but not limited to, calipers, micrometers, micro-hites, optical comparators, CMM’s, etc., • Ability to perform multiple tasks in a fast-paced environment to assure quality and delivery requirements., • Ability to read and interpret blueprints and specifications., • Advanced knowledge of GD&T., • Clear communication skills (oral and written)., • Prefer experience in an ISO 9001/AS9100 environment., • Prefer experience with Keyence IM Series., • Prefer experience with MCOSMOS and MiCAT Planner. ADDITIONAL REQUIREMENTS • Must have your own calipers and 0-1” micrometers, • Must wear OSHA approved safety shoes, • Must wear ANSI Z-87.1-2010 Impact Rated safety glasses, • Must wear current vision prescription, if required, • Must be a US Citizen or US Permanent ResidentCompany DescriptionSMT specializes in precision machined components and assemblies primarily for the aircraft, aerospace, and defense industries. We have 21 CNC machines, including 6 horizontal mills (3 of which are on a 23 pallet FMS and 1 has its own 6 pallet system), 1 high speed, 4-axis, vertical mill, 4 vertical mills with capability up to fifth axis positioning, and 8 lathes (some with live tooling). Our 2 most advanced CNC lathes are twin spindle, have twin Y axis turrets with live tooling, and are in a cell with a Fanuc robot. Some of our niche capabilities include: -Complex internal and external deburring and finishing under 10-40x magnification -Process to create precision .0005" tolerance bores with less than 16 microfinish, and 11 sigma capability -Precision surface treatment applications that eliminate the need for masking when parts require a combination of anodize and chemfilm, which results in clear and consistent edges every time.SMT specializes in precision machined components and assemblies primarily for the aircraft, aerospace, and defense industries.\r\nWe have 21 CNC machines, including 6 horizontal mills (3 of which are on a 23 pallet FMS and 1 has its own 6 pallet system), 1 high speed, 4-axis, vertical mill, 4 vertical mills with capability up to fifth axis positioning, and 8 lathes (some with live tooling). Our 2 most advanced CNC lathes are twin spindle, have twin Y axis turrets with live tooling, and are in a cell with a Fanuc robot.\r\nSome of our niche capabilities include:\r\n-Complex internal and external deburring and finishing under 10-40x magnification\r\n-Process to create precision .0005" tolerance bores with less than 16 microfinish, and 11 sigma capability\r\n-Precision surface treatment applications that eliminate the need for masking when parts require a combination of anodize and chemfilm, which results in clear and consistent edges every time.

Job Description Be the Technician Customers Count On Some technicians replace parts. Others solve problems that keep entire facilities running. At Hodge Industrial Technologies, our technicians are trusted advisors who restore critical compressed air systems, prevent costly downtime, and represent our company with professionalism every day. If you're the type of technician who enjoys diagnosing difficult problems, working independently, and taking pride in doing the job right the first time, we'd like to meet you. What You'll Do As an Industrial Electrical Technician, you'll travel to customer facilities to inspect, diagnose, repair, and maintain industrial compressed air systems and related equipment. Every day brings new challenges, requiring strong electrical and mechanical troubleshooting skills and the ability to think critically under pressure. You'll: • Diagnose electrical and mechanical issues on industrial compressed air equipment., • Troubleshoot 240V and 480V three-phase electrical systems., • Repair motors, motor controls, starters, relays, contactors, and control circuits., • Diagnose Variable Frequency Drives (VFDs), PLC-controlled equipment, and industrial electrical controls., • Read and interpret electrical schematics and wiring diagrams., • Use multimeters and diagnostic equipment to isolate equipment failures., • Perform preventive maintenance and equipment inspections., • Install replacement components and complete repairs safely and efficiently., • Communicate professionally with customers regarding findings and recommended repairs., • Complete service reports and document work accurately., • Manage your assigned territory while working independently.Why Hodge Industrial Technologies? At Hodge Industrial Technologies, we're committed to helping our technicians build long-term careers—not just fill jobs. When our customers call, they're trusting us with equipment that keeps their businesses operating. That responsibility belongs to technicians who care deeply about quality, reliability, and customer service. If that sounds like you, we'd love to talk. Requirements What We're Looking For We're searching for technicians who enjoy solving complex problems—not simply replacing parts. Preferred Experience • Industrial maintenance, • Industrial field service, • Manufacturing equipment, • Rotary screw air compressors, • Pumps and rotating equipment, • Industrial automation, • Material handling equipment, • Packaging equipment, • CNC machinery, • Hydraulic systemsTechnical Skills Experience troubleshooting: • 240V and 480V three-phase electrical systems, • Electrical controls, including motor starters and contactors, • Electric motors (preferred), • Variable Frequency Drives (VFDs) (preferred), • PLC-controlled equipment and industrial control panels (preferred)Requirements, • 2+ years of hands-on experience in industrial electrical service, maintenance, or troubleshooting., • Valid driver's license with an acceptable driving record., • Eligible to work in the United States., • Ability to lift up to 50 pounds., • Ability to work safely in industrial environments., • Ability to travel locally within your assigned territory., • Experience communicating professionally with customers in a field service or service repair setting. Benefits Benefits • Overtime opportunities, • Company service vehicle, • Health, dental, and vision insurance, • 401(k) with company contributions, • Paid vacation and holidays, • Ongoing technical training, • Career advancement opportunities

Are you fully dedicated to the art of CNC machining and CAD/CAM programming? At Phillips Commercial, our mission is to provide Legendary Service & Value to our customers, which means often going above and beyond to serve them. As an Application Engineer, you’ll work with manufacturing companies every day to help improve their operations. Our optimization strategies help our customers find the best ways to increase efficiency within their operations. We employ a highly selective process to cultivate our world-class team, prioritizing strategic improvement and a commitment to continuous improvement. Our goal is to set and consistently raise the bar for machine tool distributors and software resellers. We've built a unique team of professionals, entirely dedicated to their craft and demonstrably the best. Does this resonate with your pursuit of excellence? Must have qualifications: • Able to deliver best-in-class on-site instruction in machining and CAD/CAM programming., • Mastercam programming experience is necessary, and 5-Axis and/or Mill-Turn expertise is preferred., • Comfortable and experienced in complete setup and programming of CNC machine tools, from start-to-finish, including the first article inspection., • Five years of high-level programming experience utilizing MasterCAM, • Willingness and ability to travel 60% of the time to locations throughout the region. If you're ready to join a dynamic team and make a real impact, we want to hear from you. The expected pay range for a qualified person in this role is between $90,000.00 and $100,000.00 annually plus commission opportunities. If you have a different suggestion, please mention it in your application. Please apply at _ Phillips Corporation is an equal opportunity/affirmative action employer. All qualified applicants will receive consideration for employment without regard to sex, gender identity, sexual orientation, race, color, religion, national origin, disability, protected Veteran status, age, or any other characteristic protected by law. Phillips Corporation is an E-Verify participant.

Deine Aufgaben • Vertrieb und technische Beratung unserer Produkte, • Internationale Neukundengewinnung in den Zielbranchen für die Produkte CAM, CNC, elektrischer Antriebstechnik und unserer Industrie-4.0-Lösung, • Steuerung und Umsetzung der produktspezifischen Marketing- und Vertriebsstrategien, • Wettbewerbsbeobachtung im Rahmen der Vertriebstätigkeit, • identifizieren und Ausschöpfen von Marktpotenzialen in der Zielkundschaft, • Teilnahme an Messen und Kundenveranstaltungen, • Reporting und Pflege aller wichtiger Informationen im CRM und sonstigen Tools, • selbstständiges Arbeiten von Deinem Home-Office aus Dein Profil • Du bist aufgeschlossen, proaktiv und begeisterst Dich für moderne Steuerungs- und Industrie4.0-Lösungen, • Du hast ein abgeschlossenes technisches Studium, alternativ ein betriebswirtschaftliches Studium oder eine vergleichbare Ausbildung, • Du verfügst über min. 5 Jahre Berufserfahrung im technischen B2B – Vertrieb, • Du bist ein Verkaufstalent, ergreifst Eigeninitiative und hast sehr gute Kommunikationsfähigkeiten in der deutschen/englischen Sprache und brennst für den Vertrieb. Weitere Sprache von Vorteil, • Du hast Spaß am Umgang mit Kunden, • Analytisches, konzeptionelles und unternehmerisches Denken sowie professionelles Auftreten, Präsentations- und Moderationsstärke sind für Dich selbstverständlich, • Du bringst eine hohe Reisebereitschaft mit (ca.70%) um Kunden national aber auch international zu betreuen/gewinnen Warum wir? • Wir leben Wertschätzung: Gegenseitige Anerkennung und Respekt sind bei uns Selbstverständlichkeit. Eine offene Kommunikationskultur mit Du-Mentalität prägt unser Miteinander und macht ehrliches Feedback zur alltäglichen Routine., • Wir lieben Flexibilität und Mobilität: Festgefahrene Strukturen sind nichts für uns. Wir haben eine agile Arbeitsorganisation und digitalisierte Prozesse. Dazu passend bieten wir dir flexible Arbeitszeitmodelle, ein Shared Desk Konzept und die Möglichkeit zum Homeoffice. Somit kann jeder bei uns über seine persönlich optimalen Arbeitszeiten und Arbeitsorte mitbestimmen., • Wir achten auf unser Arbeitsumfeld: Uns ist wichtig, dass wir uns wohlfühlen. Unsere Büros sind modern, offen und hell gestaltet und laden zum Verweilen und persönlichem Austausch ein. Auch bei Equipment und Tools machen wir keine halben Sachen. Nur so erreichen wir, dass wir uns voll und ganz auf unsere Arbeit konzentrieren können., • Wir machen Mut: Wir sind die Macher von Morgen. Gute Ideen landen bei uns nicht nur auf dem Papier (das eliminieren wir sowieso zunehmend), sondern werden auch in die Tat umgesetzt. Hier kann jeder mitgestalten und erleben, wie einfallsreiche Teamarbeit zum Unternehmenserfolg beiträgt. Und damit das auch so bleibt, gibt es eigens dafür eingerichtete Zeitfenster und Räumlichkeiten, um den kreativen Köpfen genügend Freiraum zu geben., • Wir ziehen gemeinsam an einem Strang: Jeder im Team ist ein wertvolles Puzzlestück und leistet einen persönlichen Beitrag. Aber nur gemeinsam erreichen wir unsere Ziele. Untereinander sind wir die größte Inspirations- und Motivationsquelle. Daher fördern wir das gemeinsame Arbeiten und den Zusammenhalt im Team mit Workshops, Firmenausflügen und Events., • Wir gehen lächelnd zur Arbeit: Egal ob im Vertrieb, Marketing, IT, Produktmanagement oder in der Entwicklung. Eines haben wir alle gemeinsam: Das, was wir machen, machen wir einfach gerne. Über uns ProCom Automation ist ein innovatives Unternehmen mit einer offenen und familiären Kultur. Unsere Teams bestehen aus Kollegen und Kolleginnen jeden Alters, die gemeinsam Produkte bester Qualität und mit höchstem Kundennutzen liefern. Als Entwicklungsspezialist für schneidende und trennende Verfahren rüstet ProCom Automation schon seit 45 Jahren Maschinenserien mit hochentwickelter CNC-Soft- und Hardware sowie CAM-Lösungen aus. Unser Unternehmen mit Hauptsitz in Aachen hat sich in den europäischen und chinesischen Märkten etabliert und investiert kontinuierlich sowohl in die Weiterentwicklung und Erweiterung seiner Produktportfolios als auch in zukunftsweisende Technologien im Bereich Digitalisierung für maximale Effizienz und Flexibilität. Wir sind Start-up im Geiste und Familienunternehmen im Herzen. Gestalte die Zukunft gemeinsam mit uns und sei Teil der Digitalisierung! Bewirb dich bitte auch digital mit dem folgenden Link oder unter ProCom Automation GmbHJülicher Straße 344 | 52070 Aachen | karriere@procom-automation.de

Full-time Description Company Description Bodorlaser is a global leader in the development, production, and sales of laser-cutting machines. Headquartered in China, with a worldwide market network covering more than 150 countries, 20 service languages, knowledgeable sales and after-sales teams, and 24/7 service, Bodorlaser has become a trusted name in the laser cutting industry. Our advanced laser technology, innovative engineering, and commitment to customer satisfaction have enabled us to deliver world-class solutions to businesses of all sizes. With our US headquarters located in Schaumburg, Illinois, Bodorlaser is expanding its presence in the US market. We offer cutting-edge laser machinery for industries including automotive, aerospace, electronics, and manufacturing. Our products are known for their precision, efficiency, affordability, and ability to meet the ever-evolving demands of modern industry. At Bodorlaser, we are dedicated to creating an environment where our employees can thrive professionally and personally and fostering a culture of innovation, teamwork, and continuous learning. With a diverse team of professionals from around the globe, we embrace cross-cultural collaboration and strive to deliver exceptional service and technical support to our clients worldwide. We offer competitive compensation, comprehensive benefits, and the flexibility of remote working options to empower our team members to succeed. If you are driven, customer-focused, and passionate about cutting-edge technology, BodorLaser offers an exciting opportunity to be part of a fast-growing, dynamic team. Role Description: Bodorlaser is seeking a highly self-motivated and ambitious Sales Manager/Engineer or Account Manager to join our team for a full-time, remote role in the Lakeside Region. This position offers the opportunity to work flexibly from home while engaging with clients, solving technical challenges, and driving sales growth. The ideal candidate will have strong initiative, excellent business communication and interpersonal skills, and basic proficiency in Mandarin Chinese. A successful candidate must be able to manage relationships effectively with new and existing clients, provide technical product information, and work collaboratively with internal teams across different time zones, especially during the sales cycle. Requirements Responsibilities: • Identify and pursue new business opportunities in the assigned region, while nurturing relationships with existing customers., • Analyze market trends in the given area and report findings to management for sales strategy optimization., • Manage the entire sales process, from generating leads to qualifying prospects and closing deals, meeting or exceeding sales targets., • Collaborate with internal teams, including Marketing, Operations, and Service teams, to ensure customer needs are met and issues are resolved., • Provide technical support to clients, troubleshoot product issues, and recommend improved materials or machinery., • Assist the Marketing and Sales team with organizing and attending trade shows, conferences, and other promotional events., • Regularly visit customer sites to maintain relationships, resolve technical challenges, and present solutions., • Work closely with Product teams from the parent company to align on technical requirements for equipment and proposals., • Prepare and deliver detailed proposals and presentations based on customer specifications., • Ensure all administrative processes are handled effectively during the sales cycle, coordinating with different departments., • Regularly report on sales progress and challenges to the supervisor., • Other duties as assigned. Basic Qualifications: • Strong self-motivation and proactive approach, with excellent business communication and interpersonal skills., • Proficiency in both written and spoken English; basic communication skills in Mandarin Chinese., • Ability to travel for overnight business approximately 25% of the time within the US, mainly in the State of Wisconsin., • Proficiency in using CRM systems and creating reports and presentations., • Able to work both independently and collaboratively in a fast-paced environment, often requiring coordination across time zones., • Flexibility to occasionally work outside regular business hours., • Experience managing cross-departmental workflows and processes., • Bachelor’s degree or above., • 2-10 years of experience in sales or technical roles within the machine tool or manufacturing industry., • Ability to work under pressure and ambiguity. Preferred Qualifications: • Bachelor’s degree in mechanical engineering, Business/Marketing, or a related field., • 3+ years’ experience in selling laser cutting machines or other CNC machines., • Prior experience working in a cross-cultural, multinational company environment., • Residing in the Greater Chicago area or Milwaukee, WI Area is preferred. Location: This is a fully remote position, but frequent travel to visit customers in Wisconsin is required. Candidates based in the Greater Chicago area or Milwaukee, WI are preferred. Relocation is required if located outside WI or IL. For Pay Transparency, Compensation Description: The base salary range for this position in the selected city is $65,000 to $75,000 annually. Compensation may vary outside of this range depending on a number of factors, including a candidate’s qualifications, skills, competencies and experience, and location. In addition to the base salary, this role is eligible for commissions and bonus based on sales performance.The total compensation package, including commissions and bonuses, can significantly exceed the base salary depending on individual and company performance, and the estimated annual earnings for this role are between $100,000 and $150,000. Benefits and Perks: • Competitive compensation package, • Company-paid medical insurance, • Dental, and vision insurance, • Company paid basic life, short- & long-term disability insurance, • 401(k) with employer match, • Generous leave policy, • Flexible spending account, • Employee assistance program, • Holiday bonus, • Birthday gift cards, • Visa sponsorship for eligible employees, • Flexible working hours and the ability to work from home BodorLaser is an equal opportunity employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex including sexual orientation and gender identity, national origin, disability, protected veteran status, or any other characteristic protected by applicable federal, state, or local law. We conduct background checks and drug screen, in accordance with company policies and federal and state guidelines. Salary Description 65000 Starting

Description: Princeton Precision Group: Always Advancing. Each business unit under the PPG portfolio has been deliberately selected for their ability to support their customers, lead their industry, and provide high quality products. Your journey with us is more than just a job. It is an opportunity to support the manufacturing of critical hardware to key defense programs, supporting missions to space and providing access for global travel. Join us in the journey! We are actively seeking an experienced Production Machinists to join and grow in the PPG organization. The Production Machinist is responsible for operating CNC machine tools in a fast-paced job shop environment supporting the aerospace and defense industry. This position focuses on safely producing quality parts according to work instructions, blueprints, and process documentation. The Production Machinist performs routine machine operation tasks, tool touch-offs, offset adjustments, inspections, and basic troubleshooting to maintain production and quality requirements. Highlights and Benefits • Quarterly profit-sharing bonus; eligible upon hire, • Paid time off, • 401(k) with company match, • Paid holidays, • Tuition / professional development reimbursement, • Health, dental, and vision insurance, • Optional HSA with company contribution, • Short-term disability, long term disability, and life insurance at no cost, • Limitless opportunity for advancement Requirements:, • Operate CNC mills, lathes, and other production equipment according to established procedures., • Load and unload parts and materials safely and efficiently., • Perform tool touch-offs and make approved tool offset adjustments., • Monitor machine performance and identify potential issues affecting quality or productivity., • Conduct in-process inspections using measuring equipment such as micrometers, calipers, height gauges, bore gauges, thread gauges, • Read and interpret basic blueprints, work instructions, travelers, and inspection requirements., • Complete production documentation accurately and in a timely manner., • Maintain part traceability and compliance with aerospace quality requirements., • Replace worn tooling and notify supervision when tooling or equipment issues arise., • Follow all safety, quality, and housekeeping standards., • Support continuous improvement initiatives and maintain an organized work area., • Assist setup machinists and supervisors as needed to meet production schedules. Knowledge, skills, and abilities • High school diploma or equivalent., • Minimum 2 years of machining experience in a CNC manufacturing environment., • Experience operating CNC lathes and/or mills., • Ability to perform tool touch-offs and basic offset adjustments., • Ability to use precision measuring instruments., • Ability to read and interpret blueprints and process documentation., • Basic computer skills for production reporting and documentation., • Strong attention to detail and commitment to quality., • Experience in an aerospace, defense, medical, or other highly regulated manufacturing environment., • Familiarity with AS9100 quality systems., • Experience machining complex alloys including stainless steel, nickel-based alloys, titanium, or hardened materials., • Forklift or crane experience (if applicable)., • Strong mechanical aptitude., • Understanding of machining fundamentals, tooling, and cutting conditions., • Ability to identify nonconforming conditions and escalate concerns appropriately., • Ability to work independently with minimal supervision., • Strong attendance and reliability., • Effective communication and teamwork skills. Princeton Precision Group abides by applicable export control laws including the International Traffic in Arms Regulations (ITAR) in accordance with the company's export control procedures. Most positions require access to ITAR/EAR-controlled information. As such, persons considered for this position must be either a U.S. Citizen, Permanent Resident (green card holder) or otherwise classifiable as a “U.S. Person” under relevant regulations. Compensation details: 25-30 Hourly Wage PI955b97388815-37820-40811283

Job Title: Regional Technical Sales Manager Location: Mid East U.S. / Great Lakes Territory (Ohio, Kentucky, Indiana, Michigan, Illinois, Missouri); frequent travel required About Our Client Our client, a premier provider of high-quality, precision-engineered cutting tools, has more than fifty years of experience serving sectors like woodworking, aluminum, composites, and plastics. With a comprehensive inventory of industrial cutting tools, they are known for innovative, customer-driven solutions and commitment to building lasting partnerships. Their network includes hundreds of distributors and an extensive product line of thousands of SKUs, reflecting a dedication to quality and rapid customer response. Role Summary Salesfolks is seeking a Regional Technical Sales Manager for our client to drive growth in the Mid East U.S / Great Lakes Region. This is an exceptional opportunity for a motivated and technically skilled sales professional to collaborate with an established dealer network while developing new client relationships in a dedicated territory. You’ll foster high-touch, consultative sales, offering technical expertise and delivering exceptional customer service. This role offers uncapped earning potential and is suited for an individual seeking a long-term career path with a respected company. Compensation includes a monthly retainer and significant first-year OTE potential, with additional commissions available during the ramp-up period. Travel expenses are covered, and a car allowance is provided. Key Responsibilities • Account Management: Build and nurture lasting relationships with our client’s distributor network and end-users in your assigned six-state, Mid East U.S. / Great Lakes territory., • New Business Development: Identify and pursue new business opportunities within the region, expanding our client’s market presence., • Technical Support & Consulting: Act as a trusted technical advisor and field sales engineer for existing and prospective clients, offering insights to optimize their manufacturing operations., • On-Site Client Interaction: Regularly visit manufacturers, distributors, and key accounts to establish our client as a valued partner. Typical clients include manufacturers of kitchen cabinets, furniture, windows, doors, store fixtures, millwork, and other sectors working with aluminum, composite, and plastic products., • Market Insights: Provide valuable feedback on market trends, customer needs, and competitor activity. Qualifications • Technical Knowledge: Strong background in manufacturing, machining, CNC processes, or similar fields. Experience with cutting tools or tooling technology is highly preferred., • Sales Experience: Proven success in a technical sales or product specialist role, ideally within manufacturing or tooling industries., • Relationship-Building Skills: Exceptional interpersonal skills and a consultative sales approach focused on developing long-term partnerships., • Self-Driven & Autonomous: Ability to independently manage a travel-heavy schedule., • Territory Expertise: Based in the Mid East U.S. / Great Lakes Territory (Ohio, Kentucky, Indiana, Michigan, Illinois, Missouri), with flexibility for travel within the designated territory. Compensation & Benefits • Monthly Retainer Payment: Guaranteed monthly income based on experience (DOE)., • OTE Potential: Guaranteed commission during the ramp-up period, with additional commissions for sales exceeding targets and uncapped earning potential., • Car Allowance: Provided, • Travel Expenses: Fully covered, • Growth Opportunities: Clear path for advancement in a high-integrity company with a strong market reputation., • Independent Contractor (1099): Structured as a long-term career opportunity with stability, flexibility and significant income potential., • Expected Income: On-Target Earnings (OTE) in excess of $120,000 - $140,000 year Why Join Our Client Our client is more than a workplace—it’s where you can build a lasting career, establish meaningful client relationships, and become a trusted partner in mission-critical manufacturing processes. Customers value this company for life, some working with them for decades. Joining them means stepping into a role with uncapped earnings, the freedom to own your territory, and the chance to be part of a company known for innovation, customer focus, and technical excellence. If you’re a technically savvy sales professional with cutting tool experience looking to make a long-term impact, let's talk! Have you sold for any of the following businesses? If so, we want to hear from you! Peak Toolworks, Vortex Tool Co. , Guhdo GDP Tooling, Royce//AYR, Misenheimer, Inc., High Definition Tool, Leitz Tooling Systems, Leuco Tool, Great Lakes Carbide, LMT Onsrud, Amana Tool Corp., Saber Diamond Tools, Freud Tools, Harvey Tool Company, Star Cutter Company, Knight Carbide.

We are seeking a curious, hands-on Sales Manager to grow and manage relationships with OEM accounts. The position will be responsible for driving growth of Weasler and Maximatecc product lines, as well as introducing complementary solutions from our brand portfolio to meet OEM customer needs. This role is ideal for a sales professional who enjoys understanding both mechanical and digital product ecosystems, asking smart questions, and working collaboratively with engineering and application teams to deliver practical, value-added solutions. This is a remote position, with a strong preference for candidates located near a major Midwest airport to support customer visits, trade shows, and account development. What You’ll Do As a Sales Manager, you will act as both a trusted advisor and growth driver for assigned accounts by: · Managing and expanding OEM relationships through consultative, solution-based selling · Build relationships throughout our customer’s organizations; with Commodity Managers, Buyers, Engineers, and others as needed · Identifying new opportunities within existing accounts through up-selling and cross-selling · Prospecting and developing new customers in target markets · Serving as the primary commercial point of contact for assigned accounts · Partnering closely with field application engineers, engineering, and internal teams to solve customer challenges · Coordinates and leads complex commercial negotiations. · Develops and executes account strategies aligned with business and sales objectives · Translating account strategy into actionable project execution · Maintaining detailed customer maps and stakeholder relationships (buyers, engineers, commodity managers, etc.) · Traveling to customer sites, industry events, and trade shows as needed · Conducting market and competitive research and sharing insights internally · Developing annual forecasts, account plans, and sales reports · Ensuring high levels of customer satisfaction through proactive communication and follow-up · Performs other duties as assigned Experience & Background · Minimum 5 years of outside B2B sales experience (OEM or industrial preferred) · Proven success selling technical or engineered products · Experience managing long sales cycles and complex customer organizations · Working knowledge of and relationships within the agriculture market. · Strong mechanical aptitude with the ability to understand drawings and technical concepts · Naturally curious and motivated to learn how products work and how they integrate into customer systems · Comfort understanding how mechanical systems, electronic hardware, and software-driven technologies work together in customer applications · Familiarity with light technical concepts such as programming logic, automation, or systems integration; hands-on hobbies like 3D printing, CNC, or robotics are a plus Skills & Traits · Consultative, value-based selling mindset · Strong communication and relationship-building skills · Ability to work independently while collaborating across cross-functional teams · Organized, self-motivated, and comfortable in a remote role What will set you apart: · Experience selling to OEMs in agriculture, construction, lawn & turf, or industrial markets · Familiarity with: PTO drive shafts, clutches, dampers, or power transmission products HMI displays, gauges, or clusters Why This Role · Sell high-quality, respected product lines with strong market presence · Work closely with engineering and applications teams to deliver meaningful solutions · Autonomy of a remote role with support from a collaborative organization · Opportunity to grow accounts and make a direct impact on business results What We Offer: Comprehensive Health Benefits: Enjoy medical, dental, and vision coverage for positions of 30+ hours/week. Health Savings Account: Benefit from annual employer contributions to your HSA. Company-Provided Insurance: We offer life insurance, accidental death and dismemberment coverage, and short-term disability insurance. Voluntary Insurance Options: Choose additional coverage for yourself, your spouse, and your children, including critical illness, accident, hospital indemnity, and long-term disability insurance. 401(k) Plan: Take advantage of our 401(k) with matching contributions, fully vested from day one. Educational Support: Access tuition reimbursement and scholarship opportunities to further your education. Lifestyle Reimbursement: Receive a $150 Amazon gift card upon completion of your annual physical. Wellness Program: Participate in health coaching, monthly webinars, quarterly challenges, and earn gift card incentives for participation and earning points. Safe Work Environment: Work in a clean and safe environment. Generous Paid Time Off: Enjoy 14 paid holidays, including a holiday shutdown between Christmas and New Year’s, plus paid vacation available from day one. Paid Parental Leave: Take advantage of paid parental leave to support your family.

Job Type: Full-Time (40 hours/week, overtime as needed) Compensation: Base Salary + Commission Location: Remote – Must reside in or near the Baltimore, MD area We are a well-established manufacturer of high-quality, precision European woodworking machinery. Our equipment is built using advanced technology, premium materials, and industry-leading safety standards to ensure consistent performance and reliability. As a rapidly growing company, we are committed to delivering exceptional service and outstanding customer support—standards our customers have come to expect. Despite our growth, we maintain a close-knit, small-company culture where team members are empowered to work independently without excessive micromanagement. We also offer strong opportunities for advancement within our expanding organization. We are seeking enthusiastic, career-minded, and self-motivated individuals to join our team as Outside Sales Representatives in the Baltimore, MD territory. This is a remote, field-based role ideal for someone who enjoys building relationships face-to-face, managing a sales territory, and working directly with customers at their place of business. The right candidate is confident, organized, and driven to close sales. Strong communication and interpersonal skills are essential, along with the ability to manage time and territory effectively. A mechanical or technical mindset is a significant advantage, as we specialize in woodworking machinery. Prior experience in outside sales, capital equipment, or industrial sales is preferred—but we are willing to train motivated individuals with transferable sales skills. • Develop and manage customer relationships within your assigned territory, • Generate leads and actively prospect new business opportunities, • Conduct on-site visits, product demonstrations, and consultations, • Recommend machines, tools, and accessories tailored to customer needs, • Prepare and present quotes, proposals, and close sales, • Coordinate with inside sales and support teams, • Represent the company at trade shows and industry events, • Progress through a structured training program—from entry-level equipment to advanced CNC machinery, • Maintain regular communication with internal teams while working remotely, • Excellent communication and interpersonal skills, • Proven ability to build relationships and close sales, • Outside or territory sales experience preferred, • Mechanical or technical aptitude strongly preferred, • Comfortable using CRM systems and general computer tools, • Ability to travel regularly within the Baltimore-area territory, • Ability to travel occasionally for trade shows (U.S.), • Woodworking or industrial equipment experience is a plus (not required), • Health, Dental, and Vision insurance, • Retirement plan, • Paid vacation and sick time, • FSA benefit plan, • Paid holidays, • Career advancement opportunities within a growing company

Full-time Description Company Description Bodorlaser is a global leader in the development, production, and sales of laser-cutting machines. Headquartered in China, with a worldwide market network covering more than 150 countries, 20 service languages, knowledgeable sales and after-sales teams, and 24/7 service, Bodorlaser has become a trusted name in the laser cutting industry. Our advanced laser technology, innovative engineering, and commitment to customer satisfaction have enabled us to deliver world-class solutions to businesses of all sizes. With our US headquarters located in Schaumburg, Illinois, Bodorlaser is expanding its presence in the US market. We offer cutting-edge laser machinery for industries including automotive, aerospace, electronics, and manufacturing. Our products are known for their precision, efficiency, affordability, and ability to meet the ever-evolving demands of modern industry. At Bodorlaser, we are dedicated to creating an environment where our employees can thrive professionally and personally and fostering a culture of innovation, teamwork, and continuous learning. With a diverse team of professionals from around the globe, we embrace cross-cultural collaboration and strive to deliver exceptional service and technical support to our clients worldwide. We offer competitive compensation, comprehensive benefits, and the flexibility of remote working options to empower our team members to succeed. If you are driven, customer-focused, and passionate about cutting-edge technology, BodorLaser offers an exciting opportunity to be part of a fast-growing, dynamic team. Role Description: Bodorlaser is seeking a driven and results-oriented Sales Manager/Engineer to join our team in a full-time, remote role covering the West Coast region, including California, Oregon, and Washington. This position offers the opportunity to work flexibly from home while engaging with clients, solving technical challenges, and driving sales growth. The ideal candidate will have strong initiative, excellent business communication and interpersonal skills, and basic proficiency in Mandarin Chinese. A successful candidate must be able to manage relationships effectively with new and existing clients, provide technical product information, and work collaboratively with internal teams across different time zones, especially during the sales cycle. Responsibilities: • Identify and pursue new business opportunities in the assigned region, while nurturing relationships with existing customers., • Analyze market trends in the given area and report findings to management for sales strategy optimization., • Manage the entire sales process, from generating leads to qualifying prospects and closing deals, meeting or exceeding sales targets., • Collaborate with internal teams, including Marketing, Operations, and Service teams, to ensure customer needs are met and issues are resolved., • Provide technical support to clients, troubleshoot product issues, and recommend improved materials or machinery., • Assist the Marketing and Sales team with organizing and attending trade shows, conferences, and other promotional events., • Regularly visit customer sites to maintain relationships, resolve technical challenges, and present solutions., • Work closely with Product teams from the parent company to align on technical requirements for equipment and proposals., • Prepare and deliver detailed proposals and presentations based on customer specifications., • Ensure all administrative processes are handled effectively during the sales cycle, coordinating with different departments., • Regularly report on sales progress and challenges to the supervisor., • Other duties as assigned. Requirements Basic Qualifications: • Strong self-motivation and proactive approach, with excellent business communication and interpersonal skills., • Proficiency in both written and spoken English., • Ability to travel for overnight business approximately 25% of the time within the US, mainly in the West Coast region, including California, Oregon, and Washington., • Proficiency in using CRM systems and creating reports and presentations., • Able to work both independently and collaboratively in a fast-paced environment, often requiring coordination across time zones., • Flexibility to occasionally work outside regular business hours., • Experience managing cross-departmental workflows and processes., • Bachelor’s degree or above., • 2-10 years of experience in sales or technical roles within the machine tool or manufacturing industry., • Ability to work under pressure and ambiguity. Preferred Qualifications: • Bachelor’s degree in mechanical engineering, Business/Marketing, or a related field., • 3+ years’ experience in selling laser cutting machines or other CNC machines., • Prior experience working in a cross-cultural, multinational company environment., • Bilingual in Mandarin Chinese. Location: This is a fully remote position, but frequent travel to visit customers in the western coastal area is required. Candidates based in CA/OR/WA are preferred. Relocation is required if located outside of CA/OR/WA. Compensation Description For Pay Transparency : The base salary range for this position in the selected city is $65,000 to $85,000 annually. Compensation may vary outside of this range depending on a number of factors, including a candidate’s qualifications, skills, competencies and experience, and location. In addition to the base salary, this role is eligible for commissions and bonus based on sales performance.The total compensation package, including commissions and bonuses, can significantly exceed the base salary depending on individual and company performance, and the estimated annual earnings for this role are between $110,000 and $170,000. Benefits and Perks: • Competitive compensation package, • Company-paid medical insurance, • Dental, and vision insurance, • Company paid basic life, short- & long-term disability insurance, • 401(k) with employer match, • Generous leave policy, • Flexible spending account, • Employee assistance program, • Holiday bonus, • Birthday gift cards, • Visa sponsorship for eligible employees, • Flexible working hours and the ability to work from home Salary Description $65,000 – $85,000 (plus uncapped commissions)

This position is located at the HCA Florida Central Tampa Freestanding ER (801 E. Hillsborough Avenue, Tampa, FL 33604). Ready for a role that supports your unique calling in patient care and fits your life? At HCA Florida South Tampa Hospital, you’ll find clear pathways to advance backed by our unmatched nationwide transfer policy that lets you grow your career when the time is right for you. With mentorship opportunities, clinical education courses, professional certification support, and educational assistance, you will have all the resources you need to build the career of a lifetime. Job Summary and Qualifications The Clinical Nurse Coordinator (CNC) ensures and delivers high quality, patient-centered care and coordination of all functions in the unit/department during the designated shift. In collaboration with other members of the management team, the CNC directs, monitors, and evaluates nursing care in accordance with established policies/procedures, serves as a resource person for staff, and models a commitment to the organization’s vision/mission/values to support an unparalleled patient experience and clinical outcomes that contribute to overall departmental performance. What you will do in this role: • Assists with admission and discharge processes to ensure efficient throughput and high quality, patient-centered care., • Participates in the ongoing assessment of the quality of patient care services provided in the unit, in collaboration with other members of the management team., • Collaborates with subject matter experts and other managers to create an environment of teamwork that supports improved outcomes and service., • Supports a patient-first philosophy and engages in service recovery when necessary., • Supports the efforts of the facility to improve engagement by operationalizing current nursing strategies, including employee rounding, hourly rounds, and other initiatives., • Provides recommendations related to interviewing, selecting, and training new staff. Recommends and implements courses of action, including training and development, conflict resolution, personnel policy compliance, completion of performance evaluations, and/or disciplinary actions to ensure a competitively better organization., • Assists with staff scheduling. Manages all practical aspects of staff labor in accordance with patient care needs and established productivity guidelines., • Supports proper inventory control and assists with managing supplies and equipment. What qualifications you will need: • Must be licensed as a Florida Registered Nurse in accordance with state regulations or appropriate compact licensure. If compact license held, active FL RN license required within 60 days of hire., • Nursing Diploma or ASN required; BSN preferred., • Minimum two years ER RN experience required., • Current BLS (Basic Life Support) certification required., • Current ACLS (Advanced Cardiac Life Support) certification required within 6 months of hire/transfer., • Current PALS (Pediatric Advanced Life Support) and/or ENPC (Emergency Nurse Pediatric Course) certifications required within 6 months of hire/transfer., • Current NIHSS (National Institute of Health Stroke Scale), TNCC (Trauma Nursing Core Course) and CPI (Crisis Prevention Intervention) training required. New hire must obtain within 6 month grace period of hire date. Transferring employees must obtain within 6 month grace period., • National Board Certification (CEN, CPEN) highly preferred., • Critical thinking, service excellence and good interpersonal communication skills, ability to read/comprehend written instructions, ability to follow verbal instructions, PC skillsBenefits HCA Florida South Tampa Hospital, offers a total rewards package that supports the health, life, career and retirement of our colleagues. The available plans and programs include: • Comprehensive benefits for medical, prescription drug, dental, vision, behavioral health and telemedicine services, • Wellbeing support, including free counseling and referral services, • Time away from work programs for paid time off, paid family leave, long- and short-term disability coverage and leaves of absence, • Savings and retirement resources, including a 401(k) Plan with a 100% match on 3% to 9% of pay (based on years of service), Employee Stock Purchase Plan, flexible spending accounts, preferred banking partnerships, retirement readiness tools, rollover support and financial wellbeing counseling, • Education support through tuition assistance, student loan assistance, certification support, dependent scholarships and a partnership with Galen College of Nursing, • Additional benefits for fertility and family building, adoption assistance, life insurance, supplemental health protection plans, auto and home insurance, legal counseling, identity theft protection and consumer discounts Learn more about Employee Benefits Note: Eligibility for benefits may vary by location. For over 40 years, HCA Florida South Tampa Hospital has been providing comprehensive healthcare services. We provide high-quality medical care. We also provide surgery, outpatient therapies, and acute care. With a team of skilled colleagues, it's no wonder we have a reputation for excellence. The over 180-bed acute care hospital is accredited by the Joint Commission. We provide 24-hour Emergency Care, Behavioral Healthcare, and Cardiovascular Services. We also provide General Surgery and Imaging & Diagnostic Services. As South Tampa Hospital and ER, we provide high quality, advanced care. We are one of the best-performing hospitals in the Tampa Bay area. We believe excellent people make excellence happen. If this sounds like the type of meaningful work you'd like to be a part of, we hope you'll consider our careers at South Tampa Hospital. HCA Healthcare has been named one of the World's Most Ethical Companies by Ethisphere Institute for ten consecutive years (2010-2019). In 2019, HCA Healthcare spent an estimated $3.7 billion in cost for the delivery of charitable care, uninsured discounts, and other uncompensated expenses. "Nurses are essential to the delivery of healthcare and serve as its foundation. At HCA Healthcare, we are committed to equipping nurses with the tools and resources they need to deliver exceptional patient care, championing the profession, and supporting the advancement of nursing’s future." Erica Rossitto, MBA/HCM, BSN, RN, NEA-BC Senior Vice President and Chief Nurse Executive HCA Healthcaret Join a family that cares about every stage in your career! We are interviewing candidates for our RN Charge Coord Central Tampa Freestanding ER opening. Apply today and a member of our Talent Acquisition team will reach out. We are an equal opportunity employer. We do not discriminate on the basis of race, religion, color, national origin, gender, sexual orientation, age, marital status, veteran status, or disability status.

\n\n \n \n A Snapshot of Your Day \n As part of the manufacturing process will be weighing, bore scoping, washing, patching, wrapping, and doing inspections of equiax and DS molds in our Gibsonton Florida location. \n How You’ll Make an Impact \n \n • Using hand tools such as tape measures, straight edges, drills, vacuums, scissors, and utility knifes.\n, • Ability to use a borescope and use CNC machines to cut out patterns.\n, • Operating hoists and using manipulators to move molds.\n, • Other duties and cross training.\n \n What You Bring \n \n • High school graduate or GED, required.\n, • Demonstrated mechanical skills. Previous experience CNC will be a plus.\n, • Ability to work around insulation material and dust.\n, • Applicants must be legally authorized for employment in the United States without the need for current or future employer-sponsored work authorization.\n, • This position will require an export license from the Department of Commerce, Bureau of Industry and Security and/or the Department of State, Directorate of Defense Trade Controls. Issuance of any required license is a prerequisite for this position. The candidate must be able to work with export-controlled technology in accordance with US export control law.\n \n About the Team \n Gas Services \n Our Gas Services division offers Low-emission power generation through service and decarbonization. Zero or low emission power generation and all gas turbines under one roof, steam turbines and generators. Decarbonization opportunities through service offerings, modernization, and digitalization of the fleet. \n Who is Siemens Energy? \n At Siemens Energy, we are more than just an energy technology company. With ~100,000 dedicated employees in more than 90 countries, we develop the energy systems of the future, ensuring that the growing energy demand of the global community is met reliably and sustainably. The technologies created in our research departments and factories drive the energy transition and provide the base for one sixth of the world's electricity generation. \n Our global team is committed to making sustainable, reliable, and affordable energy a reality by pushing the boundaries of what is possible. We uphold a 150-year legacy of innovation that encourages our search for people who will support our focus on decarbonization, new technologies, and energy transformation. \n \n Find out how you can make a difference at Siemens Energy: https://www.siemens-energy.com/employeevideo \n Rewards \n \n • Career growth and development opportunities\n, • Supportive work culture!\n, • Great Company-paid Health and wellness benefits\n, • Paid Time Off and paid holidays!\n, • 401K savings plan with company match\n, • Family building benefits parental leave\n \n https://jobs.siemens-energy.com/jobs \n \n\n

A Snapshot of Your Day\n\n As part of the manufacturing process will be weighing, bore scoping, washing, patching, wrapping, and doing inspections of DS molds in our Gibsonton Florida location. \nHow You’ll Make an Impact\n\n \n • Using hand tools such as tape measures, straight edges, drills, vacuums, scissors, and utility knifes.\n, • Ability to use a borescope and use CNC machines to cut out patterns.\n, • Operating hoists and using manipulators to move molds.\n, • Other duties and cross training.\n \nWhat You Bring\n\n \n, • High school graduate or GED, required.\n, • Demonstrated mechanical skills. Previous experience CNC will be a plus.\n, • Ability to work around insulation material and dust.\n, • Applicants must be legally authorized for employment in the United States without the need for current or future employer-sponsored work authorization.\n, • This position will require an export license from the Department of Commerce, Bureau of Industry and Security and/or the Department of State, Directorate of Defense Trade Controls. Issuance of any required license is a prerequisite for this position. The candidate must be able to work with export-controlled technology in accordance with US export control law.\n \nAbout the Team\n\n Gas Services \n Our Gas Services division offers Low-emission power generation through service and decarbonization. Zero or low emission power generation and all gas turbines under one roof, steam turbines and generators. Decarbonization opportunities through service offerings, modernization, and digitalization of the fleet. \n Who is Siemens Energy? \n At Siemens Energy, we are more than just an energy technology company. With ~100,000 dedicated employees in more than 90 countries, we develop the energy systems of the future, ensuring that the growing energy demand of the global community is met reliably and sustainably. The technologies created in our research departments and factories drive the energy transition and provide the base for one sixth of the world's electricity generation. \n Our global team is committed to making sustainable, reliable, and affordable energy a reality by pushing the boundaries of what is possible. We uphold a 150-year legacy of innovation that encourages our search for people who will support our focus on decarbonization, new technologies, and energy transformation. \n Find out how you can make a difference at Siemens Energy: https://www.siemens-energy.com/employeevideo \n Rewards \n\n\n \n • Career growth and development opportunities\n, • Supportive work culture!\n, • Great Company-paid Health and wellness benefits\n, • Paid Time Off and paid holidays!\n, • 401K savings plan with company match\n, • Family building benefits and parental leave\n \nhttps://jobs.siemens-energy.com/jobs\n\n \n\n

Job DescriptionBe the Technician Customers Count On Some technicians replace parts. Others solve problems that keep entire facilities running. At Hodge Industrial Technologies, our technicians are trusted advisors who restore critical compressed air systems, prevent costly downtime, and represent our company with professionalism every day. If you're the type of technician who enjoys diagnosing difficult problems, working independently, and taking pride in doing the job right the first time, we'd like to meet you. What You'll Do As an Industrial Electrical Technician, you'll travel to customer facilities to inspect, diagnose, repair, and maintain industrial compressed air systems and related equipment. Every day brings new challenges, requiring strong electrical and mechanical troubleshooting skills and the ability to think critically under pressure. You'll: • Diagnose electrical and mechanical issues on industrial compressed air equipment., • Troubleshoot 240V and 480V three-phase electrical systems., • Repair motors, motor controls, starters, relays, contactors, and control circuits., • Diagnose Variable Frequency Drives (VFDs), PLC-controlled equipment, and industrial electrical controls., • Read and interpret electrical schematics and wiring diagrams., • Use multimeters and diagnostic equipment to isolate equipment failures., • Perform preventive maintenance and equipment inspections., • Install replacement components and complete repairs safely and efficiently., • Communicate professionally with customers regarding findings and recommended repairs., • Complete service reports and document work accurately., • Manage your assigned territory while working independently.Why Hodge Industrial Technologies? At Hodge Industrial Technologies, we're committed to helping our technicians build long-term careers—not just fill jobs. When our customers call, they're trusting us with equipment that keeps their businesses operating. That responsibility belongs to technicians who care deeply about quality, reliability, and customer service. If that sounds like you, we'd love to talk. Requirements What We're Looking For We're searching for technicians who enjoy solving complex problems—not simply replacing parts. Preferred Experience • Industrial maintenance, • Industrial field service, • Manufacturing equipment, • Rotary screw air compressors, • Pumps and rotating equipment, • Industrial automation, • Material handling equipment, • Packaging equipment, • CNC machinery, • Hydraulic systemsTechnical Skills Experience troubleshooting: • 240V and 480V three-phase electrical systems (preferred), • Electrical controls, including motor starters and contactors (preferred), • Variable Frequency Drives (VFDs) (preferred), • PLC-controlled equipment and industrial control panels (preferred), • Electrical schematics, • Mechanical drive systems, including bearings, belts, pulleys, and couplings (preferred), • Pneumatic systems, compressors, and related industrial equipment (preferred)Requirements, • 2+ years of hands-on experience in industrial electrical service, maintenance, or troubleshooting., • Valid driver's license with an acceptable driving record., • Eligible to work in the United States., • Ability to lift up to 50 pounds., • Ability to travel locally within your assigned territory., • Ability to read and interpret electrical schematics., • Experience communicating professionally with customers in a field service or service repair setting. Benefits Benefits • Overtime opportunities, • Company service vehicle, • Health, dental, and vision insurance, • 401(k) with company contributions, • Paid vacation and holidays, • Ongoing technical training, • Career advancement opportunities, • Stable, growing company with multiple locations

CNC machinist l Aerospace + Machine Shop Experience! This Jobot Job is hosted by: Julibeth Canafax Are you a fit? Easy Apply now by clicking the "Apply" button and sending us your resume. Salary: $35 - $45 per hour A bit about us: CNC machinist l Aerospace + Machine Shop Experience! Why join us? Company paid Medical + Dental + Vision 401K plan. Job Details Join an established precision manufacturing company serving highly regulated industries has an immediate full-time opening for an experienced CNC Machinist. This on-site role offers long-term stability and the opportunity to support a growing production environment. Hours: 1st shift Days: Monday-Friday Job Requirements: • Experience with lathe and mill, • 3 axis, 4 axis, 5 axis, • Assist with equipment setup, initial part verification, and optimization of CNC machining processes across multi-axis milling operations., • Assist with equipment setup and initial production activities, including troubleshooting and making program -adjustments to support stable operations., • Develop and modify programs to support a variety of manufacturing processes and equipment types., • Collaborate with shop personnel to improve and standardize processes, tooling, and work methods., • Maintain organized control of program files, digital models, documentation, and related records in accordance with internal procedures., • Support advanced machining activities as required in a modern manufacturing environment., • Mori Seiki, Mazak Fanuc or Siemens controls experience is desired. Qualifications • General understanding of manufacturing operations and machining concepts., • Ability to read and interpret technical drawings and specifications., • Familiarity with supporting production environments and working collaboratively with operations teams., • Strong organizational skills, attention to detail, and documentation discipline. Interested in hearing more? Easy Apply now by clicking the "Apply" button. Jobot is an Equal Opportunity Employer. We provide an inclusive work environment that celebrates diversity and all qualified candidates receive consideration for employment without regard to race, color, sex, sexual orientation, gender identity, religion, national origin, age (40 and over), disability, military status, genetic information or any other basis protected by applicable federal, state, or local laws. Jobot also prohibits harassment of applicants or employees based on any of these protected categories. It is Jobot’s policy to comply with all applicable federal, state and local laws respecting consideration of unemployment status in making hiring decisions. Sometimes Jobot is required to perform background checks with your authorization. Jobot will consider qualified candidates with criminal histories in a manner consistent with any applicable federal, state, or local law regarding criminal backgrounds, including but not limited to the Los Angeles Fair Chance Initiative for Hiring and the San Francisco Fair Chance Ordinance. Information collected and processed as part of your Jobot candidate profile, and any job applications, resumes, or other information you choose to submit is subject to Jobot's Privacy Policy, as well as the Jobot California Worker Privacy Notice and Jobot Notice Regarding Automated Employment Decision Tools which are available at jobot.com/legal. By applying for this job, you agree to receive calls, AI-generated calls, text messages, or emails from Jobot, and/or its agents and contracted partners. Frequency varies for text messages. Message and data rates may apply. Carriers are not liable for delayed or undelivered messages. You can reply STOP to cancel and HELP for help. You can access our privacy policy here: jobot.com/privacy-policy

Field Service Automated Precision Press Brakes - Tampa, FL Field Service Mechanic Tech Maintenance Technician Engineer Install Repair Calibrate Maintain CNC Sheetmetal & Heavy Metal Processing Machinery Press Brakes Metal Forming Shears Benders Stampers Winders Robot Cells . Looking for a go-getter that can service down-acting precision press brakes and similar machinery for manufacturing customers across the country. Responsibilities: • Travel to facilities and install new Precision Press Brake Machinery. • Provide user with instructions for equipment operations. • Maintain equipment installed at various facilities. • Diagnose reason for activity malfunctions and provide necessary repairs. The ideal candidate will have history of installing and servicing Press Brakes or similar bending machinery for at least two years. Must also have a clean driving record and flexible schedule for work related travel. Benefits: The company is well recognized throughout the service industry allowing driven individuals an opportunity for promotion. Attractive health benefits for employee and family such as medical, vision, and dental. Company offers tuition reimbursement and bonuses determined by individual performance. Paid time off for sick, personal, and vacation days. Position includes company vehicle and paid travel expenses. For complete details contact Christopher Moreno at: (609) 584-9000 ext 264 Or submit resume online at: http://dmc9.com/cam/app.asp Or email to: 100007090910007349@najbcareers303.com Please reference #43105FL136 when responding. Diedre Moire Corporation Education Requirements: High School Minimum Experience Requirements: 2-5 years Job City Location: Tampa Job State Location: FL Job Country Location: USA Salary Range: $90,000 to $140,000 Diedre Moire Corporation, Inc. diedremoire.com WE ARE AN EQUAL OPPORTUNITY EMPLOYER and our employment decisions are made without regard to race, color, religion, age, sex, national origin, handicap, disability or marital status. We reasonably accommodate individuals with handicaps, disabilities and bona fide religious beliefs. Jobs Career Position Hiring. CONSIDERED EXPERIENCE INCLUDES: Field Service Mechanic Tech Maintenance Technician Engineer Install Repair Calibrate Maintain CNC Sheetmetal & Heavy Metal Processing Machinery Press Brakes Metal Forming Shears Benders Stampers Winders Robot Cells #DiedreMoire #FieldServiceJobs #JobSearch #JobHunt #JobOpening #Hiring #Job #Jobs #Careers #Employment #jobposting #technicianjobs #CNCJobs #manufacturingjobs DISCLAIMER: We will make every effort to consider applications for all available positions and shall use one or more of the contact methods and addresses indicated in resume or online application. Indicated location may be proximate or may be desirable point of embarkation for paid or unpaid relocation to another venue. Job descriptions may fit single or multiple presently available or anticipated positions and are NOT an offer of employment or contract implied or otherwise. Described compensation is not definite nor precise and may be estimated and approximate and is negotiable depending on market conditions and candidate availability and other factors and is solely at the discretion of employers. Linguistics used herein may use First Person Singular and First Person Plural grammatical person construction for and with the meaning of Third Person Singular and Third Person Plural references. We reserves the right to amend and change responsibilities to meet business and organizational needs as necessary. Response to a specific posting or advertisement may result in consideration for other opportunities and not necessarily the incentive or basis of the response. Nothing herein is or may be considered a promise, guarantee, offer, pledge, agreement, contract, or oath. If you submit an application or resume which contains your email address, we will use that email address to communicate with you about this and other positions. We use an email quality control service to maintain security and a remove and dead address filter. To cancel receiving email communications, simply send an email from your address with the word remove"" in the subject line to pleaseremove@candseek4.com Or, visit the website at www.jobbankremove.com. If you have further concern regarding email received from us, call (609) 584-5499

Job Description DESCRIPTION: The Customer Care Specialist at Cornerstone Children's Nutrition Connection (CNC) primary responsibility is to provide exceptional customer service to childcare centers sponsored by CFM on the Child Care Food Program (CCFP). Working closely with assigned Childcare Centers, the Customer Care Specialist (CCS) plays a crucial role in ensuring efficient communication, accurate recordkeeping, remote technical assistance, accurate claim processing and proactive support to keep our partners in good standing with the program. The CCS also works with the Nutrition Education, Outreach and Monitoring team to make referrals as needed for on-site technical assistance and CAP follow-up as needed JOB RESPONSIBILITIES: • Serve as an integral part of a cohesive team that proactively supports all aspects of the Child Care Food Program (CCFP) claim process to insure that all centers under Cornerstone’s CCFP sponsorship receive excellent training, coaching and customer service to insure compliance with the program while maximizing the benefit to all concerned., • Serve as customer service liaison, providing relationship management of assigned food service partners sponsored by CFM, • Accurate and timely data entry of information received from assigned food service partners for compliance and claim processing., • Request, set up and maintain Center Eligibility Rosters, Attendance Rosters and monthly claim records for assigned food service partners., • Receive Claim forms and set up monthly files, • Process Claims and complete Claim forms, • Communicate with Center personnel to verify enrollment, attendance and claim information., • Inform Centers of problems and needs with claim and reports, • Make monthly referrals to Technical Assistance Coaches and Management when Centers are out of compliance or need additional field training and accompany Technical Assistance Coaches or Management as needed., • Follow up at all requests for information from Centers, • Request and collect child care licenses and other required compliance paper work for center files to keep assigned partners in good standing., • Identify red flags that indicate a need for on-site technical assistance, training, nutrition education or other assistance to insure that the Center minimizes disallowances and stays on the program., • Maintain files and documentation of all activities by recording all written, electronic and other communications regarding customers in the CNC call log and communicate any follow-up needed in a timely manner., • Communicate in a timely manner if resources are required by other staff members to resolve a customer care need., • Return all communication within the current business day or within 6 work hours., • Provide phone coverage as needed to include the giving out of program information and handling requests in the absence of other Customer Care Specialists as needed and appropriate to insure that the customers needs are met as quickly as possible., • Send out monthly packets to assigned partners to include up to date center information on monthly forms and adequate copies of monthly claim forms., • Send out any additional mailings as needed for program purposes., • Stay abreast of changes in CCFP requirements and other information that can impact claim processing and our customer’s ability to provide nutritious food to the children in their care by attending training and continuously seeking out opportunities to improve customer service as well as accuracy and efficiency in processing claims., • Participate in cross-training and overflow work relief for any area of the CCFP process as assigned., • Stay abreast of all of Cornerstone’s programs and represent Cornerstone’s mission, vision and guiding values as an ambassador to the ministry at all times., • Other duties as assigned. QUALIFICATIONS: • Basic bookkeeping, accounts payable, accounts receivable or other billing experience, • Excellent verbal and written communication skills, • Excellent organizational skills, • Data base and computer skills, • At least 3 years of data entry experience in a customer service environment, • Good understanding of CCFP guidelines, • Strong time-management skills, • Accurate and timely handling of information Monday - Friday 8:30 a.m. - 4:30 p.m