Trabajos cnc en Houston, TexasCrear alertas

Description Introduction Are you looking for a place to deliver excellent care patients deserve? At HCA Houston Healthcare Southeast we support our colleagues in their positions. Join our Team as a(an) RN Emergency Clin Nurse Coord and access programs to assist with every stage of your career. Benefits HCA Houston Healthcare Southeast, offers a total rewards package that supports the health, life, career and retirement of our colleagues. The available plans and programs include: • Comprehensive medical coverage that covers many common services at no cost or for a low copay. Plans include prescription drug and behavioral health coverage as well as free telemedicine services and free AirMed medical transportation., • Additional options for dental and vision benefits, life and disability coverage, flexible spending accounts, supplemental health protection plans (accident, critical illness, hospital indemnity), auto and home insurance, identity theft protection, legal counseling, long-term care coverage, moving assistance, pet insurance and more., • Free counseling services and resources for emotional, physical and financial wellbeing, • 401(k) Plan with a 100% match on 3% to 9% of pay (based on years of service), • Employee Stock Purchase Plan with 10% off HCA Healthcare stock, • Family support through fertility and family building benefits with Progyny and adoption assistance., • Referral services for child, elder and pet care, home and auto repair, event planning and more, • Consumer discounts through Abenity and Consumer Discounts, • Retirement readiness, rollover assistance services and preferred banking partnerships, • Education assistance (tuition, student loan, certification support, dependent scholarships), • Colleague recognition program, • Time Away From Work Program (paid time off, paid family leave, long- and short-term disability coverage and leaves of absence), • Employee Health Assistance Fund that offers free employee-only coverage to full-time and part-time colleagues based on income. Note: Eligibility for benefits may vary by location. Are you a continuous learner? With more than 94,000 nurses throughout HCA Healthcare, we are one of the largest employers of nurses in the United States. Education is key to excellence! As a majority owner of Galen College of Nursing, which joins Research College of Nursing and Mercy School of Nursing as educational facilities within the HCA Healthcare family, we make it easier and more affordable to gain certifications and job skills. Apply today for our RN Emergency Clin Nurse Coord opening and continue to learn! Job Summary and Qualifications The Clinical Nurse Coordinator (CNC) ensures and delivers high quality, patient-centered care and coordination of all functions in the unit/department during the designated shift. In collaboration with other members of the management team, the CNC directs, monitors, and evaluates nursing care in accordance with established policies/procedures, serves as a resource person for staff, and models a commitment to the organization’s vision/mission/values to support an unparalleled patient experience and clinical outcomes that contribute to overall departmental performance. What you will do in this role: • Assists with admission and discharge processes to ensure efficient throughput and high quality, patient-centered care., • Participates in the ongoing assessment of the quality of patient care services provided in the unit, in collaboration with other members of the management team., • Collaborates with subject matter experts and other managers to create an environment of teamwork that supports improved outcomes and service., • Supports a patient-first philosophy and engages in service recovery when necessary., • Supports the efforts of the facility to improve engagement by operationalizing current nursing strategies, including employee rounding, hourly rounds, and other initiatives., • Provides recommendations related to interviewing, selecting, and training new staff. Recommends and implements courses of action, including training and development, conflict resolution, personnel policy compliance, completion of performance evaluations, and/or disciplinary actions to ensure a competitively better organization., • Assists with staff scheduling. Manages all practical aspects of staff labor in accordance with patient care needs and established productivity guidelines., • Supports proper inventory control and assists with managing supplies and equipment.What qualifications you will need:, • Advanced Cardiac Life Spt must be obtained within 6 months of employment start date, • Basic Cardiac Life Support must be obtained within 30 days of employment start date, • Nonviolent Crisis Intervention must be obtained within 6 months of employment start date, • Trauma Nursing Core Course must be obtained within 6 months of employment start date, • (RN) Registered Nurse, • Emergency Nurse Pediatric Cour, or PALS Pediatric Adv Life Supt must be obtained within 6 months of employment start date, • Associate Degree, or Bachelors Degree ___ is a full-service 340+ bed acute care hospital in Pasadena, Texas. We have been a leader of medical care in Pasadena for more than 50 years. With board-certified physicians, registered nurses and expert technicians, the community has come to rely on us for top-quality, comprehensive and compassionate healthcare. HCA Houston Southeast is the only hospital in Pasadena with both Chest Pain Center Accreditation with Primary PCI and Resuscitation by the American College of Cardiology and full accreditation by The Joint Commission on the Accreditation of Healthcare Organizations. We are members of HCA Houston Healthcare, the most comprehensive family of hospitals in the region and part of the leading provider of healthcare in the country, HCA Healthcare. Together we are stronger, smarter and more accessible in providing the patient-centered care you need close to home. HCA Healthcare has been recognized as one of the World’s Most Ethical Companies® by the Ethisphere Institute more than ten times. In recent years, HCA Healthcare spent an estimated $3.7 billion in cost for the delivery of charitable care, uninsured discounts, and other uncompensated expenses. "Good people beget good people."- Dr. Thomas Frist, Sr. HCA Healthcare Co-Founder If growth and continued learning is important to you, we encourage you to apply for our RN Emergency Clin Nurse Coord opening. Our team will promptly review your application. Highly qualified candidates will be contacted for interviews. Unlock the possibilities apply today! We are an equal opportunity employer. We do not discriminate on the basis of race, religion, color, national origin, gender, sexual orientation, age, marital status, veteran status, or disability status.

Description Introduction HCA Houston Healthcare Southeast is committed to investing in the latest technology enabling nurses to work more efficiently. Are you passionate about delivering patient-centered care? Submit your application for Clinical Nurse Coordinator RN Med Surg position and spend more time at the bedside with the patient. Benefits HCA Houston Healthcare Southeast, offers a total rewards package that supports the health, life, career and retirement of our colleagues. The available plans and programs include: • Comprehensive medical coverage that covers many common services at no cost or for a low copay. Plans include prescription drug and behavioral health coverage as well as free telemedicine services and free AirMed medical transportation., • Additional options for dental and vision benefits, life and disability coverage, flexible spending accounts, supplemental health protection plans (accident, critical illness, hospital indemnity), auto and home insurance, identity theft protection, legal counseling, long-term care coverage, moving assistance, pet insurance and more., • Free counseling services and resources for emotional, physical and financial wellbeing, • 401(k) Plan with a 100% match on 3% to 9% of pay (based on years of service), • Employee Stock Purchase Plan with 10% off HCA Healthcare stock, • Family support through fertility and family building benefits with Progyny and adoption assistance., • Referral services for child, elder and pet care, home and auto repair, event planning and more, • Consumer discounts through Abenity and Consumer Discounts, • Retirement readiness, rollover assistance services and preferred banking partnerships, • Education assistance (tuition, student loan, certification support, dependent scholarships), • Colleague recognition program, • Time Away From Work Program (paid time off, paid family leave, long- and short-term disability coverage and leaves of absence), • Employee Health Assistance Fund that offers free employee-only coverage to full-time and part-time colleagues based on income. Note: Eligibility for benefits may vary by location. You contribute to our success let us contribute to yours! Whether you choose to focus on bedside care, a leadership or C-suite role, shape business and operational outcomes, or work to deliver clinical excellence behind the scenes in data science, case management or transfer centers. Unlock your potential at HCA Houston Healthcare Southeast! Job Summary and Qualifications The Clinical Nurse Coordinator (CNC) ensures and delivers high quality, patient-centered care and coordination of all functions in the unit/department during the designated shift. In collaboration with other members of the management team, the CNC directs, monitors, and evaluates nursing care in accordance with established policies/procedures, serves as a resource person for staff, and models a commitment to the organization’s vision/mission/values to support an unparalleled patient experience and clinical outcomes that contribute to overall departmental performance. What you will do in this role: • Assists with admission and discharge processes to ensure efficient throughput and high quality, patient-centered care., • Participates in the ongoing assessment of the quality of patient care services provided in the unit, in collaboration with other members of the management team., • Collaborates with subject matter experts and other managers to create an environment of teamwork that supports improved outcomes and service., • Supports a patient-first philosophy and engages in service recovery when necessary., • Supports the efforts of the facility to improve engagement by operationalizing current nursing strategies, including employee rounding, hourly rounds, and other initiatives., • Provides recommendations related to interviewing, selecting, and training new staff. Recommends and implements courses of action, including training and development, conflict resolution, personnel policy compliance, completion of performance evaluations, and/or disciplinary actions to ensure a competitively better organization., • Assists with staff scheduling. Manages all practical aspects of staff labor in accordance with patient care needs and established productivity guidelines., • Supports proper inventory control and assists with managing supplies and equipmentWhat qualifications you will need:, • Basic Cardiac Life Support must be obtained within 30 days of employment start date, • (RN) Registered Nurse with an active license in the state of Texas or a compact license, • Bachelors Degree preferred, or Associate Degree required. Must be willing to get Bachelor's degree within 2 years, • 2+ years of experience working on a med surg unit in an acute hospital setting required ___ is a full-service 340+ bed acute care hospital in Pasadena, Texas. We have been a leader of medical care in Pasadena for more than 50 years. With board-certified physicians, registered nurses and expert technicians, the community has come to rely on us for top-quality, comprehensive and compassionate healthcare. HCA Houston Southeast is the only hospital in Pasadena with both Chest Pain Center Accreditation with Primary PCI and Resuscitation by the American College of Cardiology and full accreditation by The Joint Commission on the Accreditation of Healthcare Organizations. We are members of HCA Houston Healthcare, the most comprehensive family of hospitals in the region and part of the leading provider of healthcare in the country, HCA Healthcare. Together we are stronger, smarter and more accessible in providing the patient-centered care you need close to home. HCA Healthcare has been recognized as one of the World’s Most Ethical Companies® by the Ethisphere Institute more than ten times. In recent years, HCA Healthcare spent an estimated $3.7 billion in cost for the delivery of charitable care, uninsured discounts, and other uncompensated expenses. Join a family that cares about every stage in your career! We are interviewing candidates for our Clinical Nurse Coordinator RN Med Surg opening. Apply today and a member of our Talent Acquisition team will reach out. We are an equal opportunity employer. We do not discriminate on the basis of race, religion, color, national origin, gender, sexual orientation, age, marital status, veteran status, or disability status.

Description Introduction Do you have the career opportunities as a(an) Clinical Nurse Coordinator RN - Stroke Unit you want in your current role? We invest in what matters most to nurses like you – at home, at work, and at every stage in your career. We have an exciting opportunity for you to join HCA Houston Healthcare Southeast which is a part of the nation’s leading provider of healthcare services, HCA Healthcare. Benefits HCA Houston Healthcare Southeast, offers a total rewards package that supports the health, life, career and retirement of our colleagues. The available plans and programs include: • Comprehensive medical coverage that covers many common services at no cost or for a low copay. Plans include prescription drug and behavioral health coverage as well as free telemedicine services and free AirMed medical transportation., • Additional options for dental and vision benefits, life and disability coverage, flexible spending accounts, supplemental health protection plans (accident, critical illness, hospital indemnity), auto and home insurance, identity theft protection, legal counseling, long-term care coverage, moving assistance, pet insurance and more., • Free counseling services and resources for emotional, physical and financial wellbeing, • 401(k) Plan with a 100% match on 3% to 9% of pay (based on years of service), • Employee Stock Purchase Plan with 10% off HCA Healthcare stock, • Family support through fertility and family building benefits with Progyny and adoption assistance., • Referral services for child, elder and pet care, home and auto repair, event planning and more, • Consumer discounts through Abenity and Consumer Discounts, • Retirement readiness, rollover assistance services and preferred banking partnerships, • Education assistance (tuition, student loan, certification support, dependent scholarships), • Colleague recognition program, • Time Away From Work Program (paid time off, paid family leave, long- and short-term disability coverage and leaves of absence), • Employee Health Assistance Fund that offers free employee-only coverage to full-time and part-time colleagues based on income. Note: Eligibility for benefits may vary by location. Do you want to work where you have a voice? Nurses are at the forefront of our commitment to the care and improvement of human life. At HCA Healthcare, there are many ways for nurses to have a voice through professional practice councils, advisory councils, vital voices surveys, and units of distinction. We learn from our multi-generational nursing family. We partner with our Nurses at HCA Houston Healthcare Southeast! Job Summary and Qualifications The Clinical Nurse Coordinator (CNC) ensures and delivers high quality, patient-centered care and coordination of all functions in the unit/department during the designated shift. In collaboration with other members of the management team, the CNC directs, monitors, and evaluates nursing care in accordance with established policies/procedures, serves as a resource person for staff, and models a commitment to the organization’s vision/mission/values to support an unparalleled patient experience and clinical outcomes that contribute to overall departmental performance. What you will do in this role: • Assists with admission and discharge processes to ensure efficient throughput and high quality, patient-centered care., • Participates in the ongoing assessment of the quality of patient care services provided in the unit, in collaboration with other members of the management team., • Collaborates with subject matter experts and other managers to create an environment of teamwork that supports improved outcomes and service., • Supports a patient-first philosophy and engages in service recovery when necessary., • Supports the efforts of the facility to improve engagement by operationalizing current nursing strategies, including employee rounding, hourly rounds, and other initiatives., • Provides recommendations related to interviewing, selecting, and training new staff. Recommends and implements courses of action, including training and development, conflict resolution, personnel policy compliance, completion of performance evaluations, and/or disciplinary actions to ensure a competitively better organization., • Assists with staff scheduling. Manages all practical aspects of staff labor in accordance with patient care needs and established productivity guidelines., • Supports proper inventory control and assists with managing supplies and equipment. What qualifications you will need: • Basic Cardiac Life Support must be obtained within 30 days of employment start date, • Registered Nurse, • Associate Degree ___ is a full-service 340+ bed acute care hospital in Pasadena, Texas. We have been a leader of medical care in Pasadena for more than 50 years. With board-certified physicians, registered nurses and expert technicians, the community has come to rely on us for top-quality, comprehensive and compassionate healthcare. HCA Houston Southeast is the only hospital in Pasadena with both Chest Pain Center Accreditation with Primary PCI and Resuscitation by the American College of Cardiology and full accreditation by The Joint Commission on the Accreditation of Healthcare Organizations. We are members of HCA Houston Healthcare, the most comprehensive family of hospitals in the region and part of the leading provider of healthcare in the country, HCA Healthcare. Together we are stronger, smarter and more accessible in providing the patient-centered care you need close to home. HCA Healthcare has been recognized as one of the World’s Most Ethical Companies® by the Ethisphere Institute more than ten times. In recent years, HCA Healthcare spent an estimated $3.7 billion in cost for the delivery of charitable care, uninsured discounts, and other uncompensated expenses. "Bricks and mortar do not make a hospital. People do."- Dr. Thomas Frist, Sr. HCA Healthcare Co-Founder If this opportunity is your next step in your career path, we encourage you to apply for our Clinical Nurse Coordinator RN - Stroke Unit opening. We review all applications. Qualified candidates will be contacted by a member of our team. We are interviewing apply today!

Description Introduction Do you currently have an opportunity to make a real impact with your work? With over 2,000 sites of care and serving over 31.2 million patient interactions every year, nurses at HCA Houston Healthcare Medical Center have the opportunity to make a real impact. As a(an) Clinical Nurse Coordinator Cardiac Cath Lab you can be a part of change. Benefits HCA Houston Healthcare Medical Center, offers a total rewards package that supports the health, life, career and retirement of our colleagues. The available plans and programs include: • Comprehensive medical coverage that covers many common services at no cost or for a low copay. Plans include prescription drug and behavioral health coverage as well as free telemedicine services and free AirMed medical transportation., • Additional options for dental and vision benefits, life and disability coverage, flexible spending accounts, supplemental health protection plans (accident, critical illness, hospital indemnity), auto and home insurance, identity theft protection, legal counseling, long-term care coverage, moving assistance, pet insurance and more., • Free counseling services and resources for emotional, physical and financial wellbeing, • 401(k) Plan with a 100% match on 3% to 9% of pay (based on years of service), • Employee Stock Purchase Plan with 10% off HCA Healthcare stock, • Family support through fertility and family building benefits with Progyny and adoption assistance., • Referral services for child, elder and pet care, home and auto repair, event planning and more, • Consumer discounts through Abenity and Consumer Discounts, • Retirement readiness, rollover assistance services and preferred banking partnerships, • Education assistance (tuition, student loan, certification support, dependent scholarships), • Colleague recognition program, • Time Away From Work Program (paid time off, paid family leave, long- and short-term disability coverage and leaves of absence), • Employee Health Assistance Fund that offers free employee-only coverage to full-time and part-time colleagues based on income. Note: Eligibility for benefits may vary by location. It is an exciting time to be a nurse at HCA Healthcare! Come unlock your career potential and see how rewarding it can be to reach your personal and professional goals. Help to advance the practice of nursing and improve positive outcomes for your patients as a (an) Clinical Nurse Coordinator Cardiac Cath Lab. We want your knowledge and expertise! Job Summary and Qualifications The Clinical Nurse Coordinator (CNC) ensures and delivers high quality, patient-centered care and coordination of all functions in the unit/department during the designated shift. In collaboration with other members of the management team, the CNC directs, monitors, and evaluates nursing care in accordance with established policies/procedures, serves as a resource person for staff, and models a commitment to the organization’s vision/mission/values to support an unparalleled patient experience and clinical outcomes that contribute to overall departmental performance. We are seeking a Clinical Nurse Coordinator (RN) Cardiac Cath Lab for our facility to ensure that we continue to provide all patients with high quality, efficient care. We are an amazing team that works hard to support each other and we are seeking a phenomenal addition like you who feels patient care is as meaningful as we do. We want you to apply now! We are seeking a Clinical Nurse Coordinator (RN) Cardiac Cath Lab for our facility to ensure that we continue to provide all patients with high quality, efficient care. We are an amazing team that works hard to support each other and we are seeking a phenomenal addition like you who feels patient care is as meaningful as we do. We want you to apply now! What You Will Do In Your Role: • You will deliver high quality, patient-centered care and coordination of all functions in the Cardiac Cath Lab Department during the designated shift., • Associate Degree in Nursing is required. BSN is highly preferred., • Current Registered Nurse License in the State of Texas or Multi-State Compact License (Employees with RN Compact License are required to obtain Texas RN License within 90 days of hire date)., • Current American Heart Association BLS Certification is required., • ACLS and PALS are required., • 2 years of Critical Care Nursing experience required in Critical Care, ICU, ER, Acute Inpatient setting. Charge experience is highly preferred. ___ is a 445+ bed acute care hospital located in the heart of central Houston, adjacent to the Medical Center and Museum District, and provides quality care for the greater Houston area. Established in 1975, our hospital has been serving Houston for more than 40 years. We provide a wide range of medical services, including cardiology, bariatrics, orthopedics, neurology, emergency care and more. Our comprehensive medical specialties are here to offer individualized care to every individual that walks through our doors. We also offer 24/7 emergency services and two intensive care units: surgical intensive care unit (SICU) and medical intensive care unit (MICU). We are an accredited Metabolic and Bariatric Surgery Accreditation and Quality Improvement Program (MBSAQIP) Center and an accredited Chest Pain Center with Primary PCI. We are members of HCA Houston Healthcare, the most comprehensive family of hospitals in the region and part of the leading provider of healthcare in the country, HCA Healthcare. Together we are stronger, smarter and more accessible in providing the patient-centered care you need close to home. HCA Healthcare has been recognized as one of the World’s Most Ethical Companies® by the Ethisphere Institute more than ten times. In recent years, HCA Healthcare spent an estimated $3.7 billion in cost for the delivery of charitable care, uninsured discounts, and other uncompensated expenses. "There is so much good to do in the world and so many different ways to do it."- Dr. Thomas Frist, Sr. HCA Healthcare Co-Founder Be a part of an organization that leverages our size to make a real impact in our industry! Our Talent Acquisition team is reviewing applications for our Clinical Nurse Coordinator Cardiac Cath Lab opening. Submit your application today and help advance the practice of nursing. We are an equal opportunity employer. We do not discriminate on the basis of race, religion, color, national origin, gender, sexual orientation, age, marital status, veteran status, or disability status.

Description Introduction Are you looking for a place to deliver excellent care patients deserve? At HCA Houston Healthcare Medical Center we support our colleagues in their positions. Join our Team as a Clinical Nurse Coordinator Acute Inpatient Medical and access programs to assist with every stage of your career. Benefits HCA Houston Healthcare Medical Center, offers a total rewards package that supports the health, life, career and retirement of our colleagues. The available plans and programs include: • Comprehensive medical coverage that covers many common services at no cost or for a low copay. Plans include prescription drug and behavioral health coverage as well as free telemedicine services and free AirMed medical transportation., • Additional options for dental and vision benefits, life and disability coverage, flexible spending accounts, supplemental health protection plans (accident, critical illness, hospital indemnity), auto and home insurance, identity theft protection, legal counseling, long-term care coverage, moving assistance, pet insurance and more., • Free counseling services and resources for emotional, physical and financial wellbeing, • 401(k) Plan with a 100% match on 3% to 9% of pay (based on years of service), • Employee Stock Purchase Plan with 10% off HCA Healthcare stock, • Family support through fertility and family building benefits with Progyny and adoption assistance., • Referral services for child, elder and pet care, home and auto repair, event planning and more, • Consumer discounts through Abenity and Consumer Discounts, • Retirement readiness, rollover assistance services and preferred banking partnerships, • Education assistance (tuition, student loan, certification support, dependent scholarships), • Colleague recognition program, • Time Away From Work Program (paid time off, paid family leave, long- and short-term disability coverage and leaves of absence), • Employee Health Assistance Fund that offers free employee-only coverage to full-time and part-time colleagues based on income. Note: Eligibility for benefits may vary by location. Are you a continuous learner? With more than 94,000 nurses throughout HCA Healthcare, we are one of the largest employers of nurses in the United States. Education is key to excellence! As a majority owner of Galen College of Nursing, which joins Research College of Nursing and Mercy School of Nursing as educational facilities within the HCA Healthcare family, we make it easier and more affordable to gain certifications and job skills. Apply today for our Clinical Nurse Coordinator Acute Inpatient Medical opening and continue to learn! Job Summary and Qualifications The Clinical Nurse Coordinator (CNC) ensures and delivers high quality, patient-centered care and coordination of all functions in the unit/department during the designated shift. In collaboration with other members of the management team, the CNC directs, monitors, and evaluates nursing care in accordance with established policies/procedures, serves as a resource person for staff, and models a commitment to the organization’s vision/mission/values to support an unparalleled patient experience and clinical outcomes that contribute to overall departmental performance. What you will do in this role: • Assists with admission and discharge processes to ensure efficient throughput and high quality, patient-centered care., • Participates in the ongoing assessment of the quality of patient care services provided in the unit, in collaboration with other members of the management team., • Collaborates with subject matter experts and other managers to create an environment of teamwork that supports improved outcomes and service., • Supports a patient-first philosophy and engages in service recovery when necessary., • Supports the efforts of the facility to improve engagement by operationalizing current nursing strategies, including employee rounding, hourly rounds, and other initiatives., • Provides recommendations related to interviewing, selecting, and training new staff. Recommends and implements courses of action, including training and development, conflict resolution, personnel policy compliance, completion of performance evaluations, and/or disciplinary actions to ensure a competitively better organization., • Assists with staff scheduling. Manages all practical aspects of staff labor in accordance with patient care needs and established productivity guidelines., • Supports proper inventory control and assists with managing supplies and equipment. What qualifications you will need: • Basic Cardiac Life Support must be obtained within 30 days of employment start date, • (RN) Registered Nurse, • Bachelors Degree, or Associate Degree ___ is a 445+ bed acute care hospital located in the heart of central Houston, adjacent to the Medical Center and Museum District, and provides quality care for the greater Houston area. Established in 1975, our hospital has been serving Houston for more than 40 years. We provide a wide range of medical services, including cardiology, bariatrics, orthopedics, neurology, emergency care and more. Our comprehensive medical specialties are here to offer individualized care to every individual that walks through our doors. We also offer 24/7 emergency services and two intensive care units: surgical intensive care unit (SICU) and medical intensive care unit (MICU). We are an accredited Metabolic and Bariatric Surgery Accreditation and Quality Improvement Program (MBSAQIP) Center and an accredited Chest Pain Center with Primary PCI. We are members of HCA Houston Healthcare, the most comprehensive family of hospitals in the region and part of the leading provider of healthcare in the country, HCA Healthcare. Together we are stronger, smarter and more accessible in providing the patient-centered care you need close to home. HCA Healthcare has been recognized as one of the World’s Most Ethical Companies® by the Ethisphere Institute more than ten times. In recent years, HCA Healthcare spent an estimated $3.7 billion in cost for the delivery of charitable care, uninsured discounts, and other uncompensated expenses. "Good people beget good people."- Dr. Thomas Frist, Sr. HCA Healthcare Co-Founder If growth and continued learning is important to you, we encourage you to apply for our Clinical Nurse Coordinator Acute Inpatient Medical opening. Our team will promptly review your application. Highly qualified candidates will be contacted for interviews. Unlock the possibilities apply today!

Description Introduction Experience the HCA Healthcare difference where colleagues are trusted, valued members of our healthcare team. Grow your career with an organization committed to delivering respectful, compassionate care, and where the unique and intrinsic worth of each individual is recognized. Submit your application for the opportunity below:Clinical Nurse Coordinator RNHCA Houston Healthcare Southeast Benefits HCA Houston Healthcare Southeast, offers a total rewards package that supports the health, life, career and retirement of our colleagues. The available plans and programs include: • Comprehensive medical coverage that covers many common services at no cost or for a low copay. Plans include prescription drug and behavioral health coverage as well as free telemedicine services and free AirMed medical transportation., • Additional options for dental and vision benefits, life and disability coverage, flexible spending accounts, supplemental health protection plans (accident, critical illness, hospital indemnity), auto and home insurance, identity theft protection, legal counseling, long-term care coverage, moving assistance, pet insurance and more., • Free counseling services and resources for emotional, physical and financial wellbeing, • 401(k) Plan with a 100% match on 3% to 9% of pay (based on years of service), • Employee Stock Purchase Plan with 10% off HCA Healthcare stock, • Family support through fertility and family building benefits with Progyny and adoption assistance., • Referral services for child, elder and pet care, home and auto repair, event planning and more, • Consumer discounts through Abenity and Consumer Discounts, • Retirement readiness, rollover assistance services and preferred banking partnerships, • Education assistance (tuition, student loan, certification support, dependent scholarships), • Colleague recognition program, • Time Away From Work Program (paid time off, paid family leave, long- and short-term disability coverage and leaves of absence), • Employee Health Assistance Fund that offers free employee-only coverage to full-time and part-time colleagues based on income. Note: Eligibility for benefits may vary by location. We are seeking a(an) Clinical Nurse Coordinator RN for our team to ensure that we continue to provide all patients with high quality, efficient care. Did you get into our industry for these reasons? We are an amazing team that works hard to support each other and are seeking a phenomenal addition like you who feels patient care is as meaningful as we do. We want you to apply! Job Summary and Qualifications The Clinical Nurse Coordinator (CNC) ensures and delivers high quality, patient-centered care and coordination of all functions in the unit/department during the designated shift. In collaboration with other members of the management team, the CNC directs, monitors, and evaluates nursing care in accordance with established policies/procedures, serves as a resource person for staff, and models a commitment to the organization’s vision/mission/values to support an unparalleled patient experience and clinical outcomes that contribute to overall departmental performance. What you will do in this role: • Assists with admission and discharge processes to ensure efficient throughput and high quality, patient-centered care., • Participates in the ongoing assessment of the quality of patient care services provided in the unit, in collaboration with other members of the management team., • Collaborates with subject matter experts and other managers to create an environment of teamwork that supports improved outcomes and service., • Supports a patient-first philosophy and engages in service recovery when necessary., • Supports the efforts of the facility to improve engagement by operationalizing current nursing strategies, including employee rounding, hourly rounds, and other initiatives., • Provides recommendations related to interviewing, selecting, and training new staff. Recommends and implements courses of action, including training and development, conflict resolution, personnel policy compliance, completion of performance evaluations, and/or disciplinary actions to ensure a competitively better organization., • Assists with staff scheduling. Manages all practical aspects of staff labor in accordance with patient care needs and established productivity guidelines., • Basic Cardiac Life Support must be obtained within 30 days of employment start date, • Registered Nurse, • Associate Degree, or Bachelors Degree ___ is a full-service 340+ bed acute care hospital in Pasadena, Texas. We have been a leader of medical care in Pasadena for more than 50 years. With board-certified physicians, registered nurses and expert technicians, the community has come to rely on us for top-quality, comprehensive and compassionate healthcare. HCA Houston Southeast is the only hospital in Pasadena with both Chest Pain Center Accreditation with Primary PCI and Resuscitation by the American College of Cardiology and full accreditation by The Joint Commission on the Accreditation of Healthcare Organizations. We are members of HCA Houston Healthcare, the most comprehensive family of hospitals in the region and part of the leading provider of healthcare in the country, HCA Healthcare. Together we are stronger, smarter and more accessible in providing the patient-centered care you need close to home. HCA Healthcare has been recognized as one of the World’s Most Ethical Companies® by the Ethisphere Institute more than ten times. In recent years, HCA Healthcare spent an estimated $3.7 billion in cost for the delivery of charitable care, uninsured discounts, and other uncompensated expenses. "There is so much good to do in the world and so many different ways to do it."- Dr. Thomas Frist, Sr. HCA Healthcare Co-Founder If you find this opportunity compelling, we encourage you to apply for our Clinical Nurse Coordinator RN opening. We promptly review all applications. Highly qualified candidates will be directly contacted by a member of our team. We are interviewing apply today!

Description Introduction Do you have the career opportunities as a(an) Clinical Nurse Coordinator RN Surgical Specialty you want in your current role? We invest in what matters most to nurses like you – at home, at work, and at every stage in your career. We have an exciting opportunity for you to join HCA Houston Healthcare Southeast which is a part of the nation’s leading provider of healthcare services, HCA Healthcare. Benefits HCA Houston Healthcare Southeast, offers a total rewards package that supports the health, life, career and retirement of our colleagues. The available plans and programs include: • Comprehensive medical coverage that covers many common services at no cost or for a low copay. Plans include prescription drug and behavioral health coverage as well as free telemedicine services and free AirMed medical transportation., • Additional options for dental and vision benefits, life and disability coverage, flexible spending accounts, supplemental health protection plans (accident, critical illness, hospital indemnity), auto and home insurance, identity theft protection, legal counseling, long-term care coverage, moving assistance, pet insurance and more., • Free counseling services and resources for emotional, physical and financial wellbeing, • 401(k) Plan with a 100% match on 3% to 9% of pay (based on years of service), • Employee Stock Purchase Plan with 10% off HCA Healthcare stock, • Family support through fertility and family building benefits with Progyny and adoption assistance., • Referral services for child, elder and pet care, home and auto repair, event planning and more, • Consumer discounts through Abenity and Consumer Discounts, • Retirement readiness, rollover assistance services and preferred banking partnerships, • Education assistance (tuition, student loan, certification support, dependent scholarships), • Colleague recognition program, • Time Away From Work Program (paid time off, paid family leave, long- and short-term disability coverage and leaves of absence), • Employee Health Assistance Fund that offers free employee-only coverage to full-time and part-time colleagues based on income. Note: Eligibility for benefits may vary by location. Do you want to work where you have a voice? Nurses are at the forefront of our commitment to the care and improvement of human life. At HCA Healthcare, there are many ways for nurses to have a voice through professional practice councils, advisory councils, vital voices surveys, and units of distinction. We learn from our multi-generational nursing family. We partner with our Nurses at HCA Houston Healthcare Southeast! Job Summary and Qualifications The Clinical Nurse Coordinator (CNC) ensures and delivers high quality, patient-centered care and coordination of all functions in the unit/department during the designated shift. In collaboration with other members of the management team, the CNC directs, monitors, and evaluates nursing care in accordance with established policies/procedures, serves as a resource person for staff, and models a commitment to the organization’s vision/mission/values to support an unparalleled patient experience and clinical outcomes that contribute to overall departmental performance. What you will do in this role: • Assists with admission and discharge processes to ensure efficient throughput and high quality, patient-centered care., • Participates in the ongoing assessment of the quality of patient care services provided in the unit, in collaboration with other members of the management team., • Collaborates with subject matter experts and other managers to create an environment of teamwork that supports improved outcomes and service., • Supports a patient-first philosophy and engages in service recovery when necessary., • Supports the efforts of the facility to improve engagement by operationalizing current nursing strategies, including employee rounding, hourly rounds, and other initiatives., • Provides recommendations related to interviewing, selecting, and training new staff. Recommends and implements courses of action, including training and development, conflict resolution, personnel policy compliance, completion of performance evaluations, and/or disciplinary actions to ensure a competitively better organization., • Assists with staff scheduling. Manages all practical aspects of staff labor in accordance with patient care needs and established productivity guidelines., • Supports proper inventory control and assists with managing supplies and equipment. What qualifications you will need: • Basic Cardiac Life Support must be obtained within 30 days of employment start date, • Registered Nurse, • Associate Degree, or Bachelors Degree ___ is a full-service 340+ bed acute care hospital in Pasadena, Texas. We have been a leader of medical care in Pasadena for more than 50 years. With board-certified physicians, registered nurses and expert technicians, the community has come to rely on us for top-quality, comprehensive and compassionate healthcare. HCA Houston Southeast is the only hospital in Pasadena with both Chest Pain Center Accreditation with Primary PCI and Resuscitation by the American College of Cardiology and full accreditation by The Joint Commission on the Accreditation of Healthcare Organizations. We are members of HCA Houston Healthcare, the most comprehensive family of hospitals in the region and part of the leading provider of healthcare in the country, HCA Healthcare. Together we are stronger, smarter and more accessible in providing the patient-centered care you need close to home. HCA Healthcare has been recognized as one of the World’s Most Ethical Companies® by the Ethisphere Institute more than ten times. In recent years, HCA Healthcare spent an estimated $3.7 billion in cost for the delivery of charitable care, uninsured discounts, and other uncompensated expenses. "Bricks and mortar do not make a hospital. People do."- Dr. Thomas Frist, Sr. HCA Healthcare Co-Founder If this opportunity is your next step in your career path, we encourage you to apply for our Clinical Nurse Coordinator RN Surgical Specialty opening. We review all applications. Qualified candidates will be contacted by a member of our team. We are interviewing apply today!

Job DescriptionWe’re hiring a Press Brake Operator for our Houston, TX client! We are looking for experienced, reliable, hard-working employees who can interview immediately! DESCRIPTION OF YOUR DREAM JOB: • Job Title: Press Brake Operator, • Location: Northwest Houston, • Pay: $23-$28, • Hours: Monday - Friday 6:00am-2:30pm, • Duration: Temp to Hire, • Description of Duties: Set up and adjust machines to operate CNC press brake to shape and fabricate sheet metal. Read work orders, blueprints, and drawings to guide in machine set up. Utilize protractors, calipers, etc., to accurately inspect parts. Document work and note any quality or discrepancies.

Job DescriptionSalary: $17 - $20 About us SpaceManager Closet is the fastest growing companies in the closet and home organization solutions industry in Houston. At SpaceManager Closets, we pride ourselves on working hard, enjoying what we do, and exceeding our customers expectations. This is an exciting opportunity for a carpentry and wood working pro! Multiple Cabinet Manufacturing Jobs SpaceManager Closets has become the top rated custom closets and home organization systems companies in Houston. SpaceManager values its ability to deliver the best customer service possible and it shows weve won multiple service awards from Angies List, Best Picks, Houzz and others. The amazing SpaceManager Team makes all of these accomplishments possible. The ideal person is hard working and teachable, with an eye for detail. Previous experience in carpentry, closet or cabinet industry is preferred. We are looking for Experience with woodworking hand tools - nail gun, table saw etc. Running Edgebanders, Beam Saws, and CNC . Packing and Final Assembly Quality Control and Inspection Qualifications: High-End Cabinetry Manufacturing Cabinetry Assembly/Finishing Touch Up Experience with numerous hardware accessories Cabinetry Adjustment Hardware Installation Candidates should have various woodworking experiences Experience working in a production environment Problem-solving & Critical thinking Great Attitude Highly Motivated Great people skills High Standard of Customer Service We will provide tools if needed Ability to lift 50+ lbs. SpaceManager Closets provides custom designed and manufactured, functional and stylish home organizational systems. We started out building custom closet organizer systems 20 years ago and have since expanded our offering to include expertly crafted custom closet systems, custom home office cabinets, custom pantry closets, custom garage cabinets, garage organizers and epoxy flooring, wall beds or murphy beds, custom entertainment centers, wine rooms and solutions for a host of other rooms and spaces. We work directly with homeowners on their specific projects, but we are also trusted by several home builders and commercial customers in the Houston area to be their exclusive provider of home organizational systems

Job Description Okuma CNC Machinist – Day Shift Location: Houston, TX Employment Type: Full-Time About the Role We’re looking for an experienced CNC Machinist who’s comfortable taking ownership of setup, operation, and quality checks on a brand-new Okuma machine. This is a day-shift position with a stable, well-organized team that’s investing in new technology and steady growth. What You’ll Do • Set up and operate an Okuma CNC machine (mill or lathe depending on background), • Run production parts with attention to accuracy, repeatability, and cycle efficiency, • Read and interpret blueprints, drawings, and GD&T, • Perform tool offsets, wear adjustments, and basic edits at the control, • Inspect parts using calipers, micrometers, height gauges, and other measurement tools, • Maintain a clean, organized work area and follow all safety procedures, • Hands-on experience running CNC equipment — Okuma experience is Required., • Ability to read and interpret engineering prints, • Strong understanding of machining practices, tooling, speeds/feeds, and quality checks, • Comfort making minor program edits at the machine, • Day Shift 6a-6p, • Competitive hourly pay, plus overtime opportunities Equal Opportunity Statement: Summa Staffing Technologies is an Equal Opportunity Employer. We celebrate diversity and are committed to creating an inclusive environment for all employees.

Job Description Machine Operator Sets up and operates computer numerical control Brake Press, Roll Former, Raz, CNC Punch, Laser, or Amada machines. Essential job functions: • Selects, aligns punch tools., • Identifies and select necessary metal and equipment, including mechanical equipment and/or tool., • Retrieve and input computerized machine control media., • Verifies conformance of finished work-piece to specifications., • Uses bars, calipers, gauges, precision instruments, hand tools and wrenches., • Maintains necessary maintenance records., • Maintains a good housekeeping in the plant and work areas Marginal job functions: • Perform other tasks as assigned by supervisor Knowledge, skills and abilities: • Ability to carry out not only simple but complex oral and written., • Basic math skills., • Ability to read and understand English sufficiently., • Ability to operate CNC machines and equipment., • Ability to read blue prints drawings in order to perform jobs according to specifications., • Ability to comprehend additional training in relation to the performing of the work duties., • Ability to develop other technical and management skills for future promotion., • High level of attentiveness and physical coordination to perform the work activities safely and productively. Physical demands: 100 % of the work tasks are performed indoors and subjected to environmental and weather condition changes. Hours:5:30 PM - 3:30 AM, MONDAY - FRIDAY Week: 40 or more hours per week. Lunch: Half an hour. Standing: Stands 100 % of the time Environment: The Shop is not air-conditioned Stress: Medium Physical task: Must bend, squat, lift, push or pull material up to 50 lbs frequently. Other Ergonomics Requirements: The position of CNC punch operator is a physically demanding job. The functions performed ordinarily involve: extending hands and arms in all directions, holding, grasping, pressing, turning objects using hands, picking, lifting, pinching, or otherwise working with fingers. Must of these work activities are performed from awkward positions that requires a lot of physical strength and coordination, including eyes' coordination. Functions also involve frequent stooping, kneeling, crouching and crawling, bending at waist, bending legs, bending downward and forward, and moving about on hands and knees. Performance of some tasks or operation of equipment may require motor coordination, finger-dexterity, eye-hand-foot coordination and color discrimination. Qualifications Standards: • Prior CNC machine experience. Performance Standards: The criteria for evaluation in this position include, but are not limited to, the following: • The ability to communicate effectively with and work with other personnel and customers., • Proper operation of equipment., • Visual observation and periodic verification. Job Posted by ApplicantPro

Job Description Machine Shop Operator Houston, Texas Full-Time Role Summary/Purpose Plan and perform the set up and operation of an assigned CNC numerical controlled lathe to machine component parts in process of ferrous, non-ferrous and alloy metals. Work involves the assignment to either the NC/CNC Lathes, proving out computer programs in collaboration with Programmer, and following prescribed program, tooling, set up and offset specifications. Essential Responsibilities • Must be able to work from detail part drawings, work orders, set ups, tooling, process and operation instruction sheets, and digital program., • Set up and operate 2-axis lathes and operate 4-axis lathes on a wide range of products, receiving assistance from programmer or supervisor if needed., • Review parts program file and select set tools in tool holder, turret, or cross slide location., • Operate control console to enter program data, back off tool offsets, and check out with dry run. Edit the program as required., • Unload bar stock from delivery truck with overhead crane and place in intermediate storage area., • Load part, sequence each tool, enter offset adjustment data, and continue trails (as required) to produce piece meeting drawing specifications., • Inspect parts periodically in accordance with established frequency, for conformance to quality and engineering specifications, making offsets (as required) to compensate for tool wear., • Indicate work to detect and eliminate run out., • Tolerances are very strict and involve a demand for squareness, concentricity, and parallelism., • Detect and report faulty operations, defective material, and equipment, drawing discrepancies, and other unusual conditions to the proper supervisor., • Maintain workplace in neat and orderly condition. Qualifications/Requirements • GED or High School Diploma, • 1 - 2 years Manufacturing Experience Dresser is an Equal Opportunity Employer. We respect and seek to empower each individual and support the diverse cultures, perspectives, skills, and experiences within our workforce. Employment decisions are made without regard to race, color, religion, national origin, gender, sexual orientation, gender identity, age, physical or mental disability, genetic factors, military/veteran status, or other characteristics protected by law.

Job Description CNC Saw Operator ???? Location: 6525 Homestead Road, Houston, TX 77028 ???? Work Hours: 6:00 AM to 2:30 PM, Monday through Friday ???? Competitive Compensation Make the Right Connection—Build Your Career with Dixon! The Dixon Group is looking for a dedicated and skilled CNC Saw Operator to join our team in Houston, TX! As our CNC Saw Operator, you will be essential in the material preparation process, ensuring raw stock meets the precise specifications required for our advanced CNC machining operations. If you are passionate about precision, safety, and working with modern machinery, this is your opportunity to contribute to the foundation of our high-quality products. Who We Are: The Dixon Group is a global, family-owned manufacturing company with a history of over 100 years of operation in the U.S.A. Based in Chestertown, Maryland, with distribution centers located worldwide. The company has a diverse workforce and a strong values-based culture. As an innovator in the hose coupling industry, our mission is to provide real solutions for our customers while fostering a supportive and collaborative work environment. At The Dixon Group, we value the contributions of our Military Veterans and proudly employ our nation’s heroes. Veterans are strongly encouraged to apply. ⚙️ What You'll Do: • Precision Cutting: Set up, program (as needed), and operate various automated/horizontal band saws to accurately cut raw material stock to specified lengths and angles., • Technical Interpretation: Thoroughly read and interpret complex work orders, blueprints, and engineering drawings to determine correct dimensions, material types, and optimal cutting methods., • Quality Assurance: Conduct first-piece inspections and in-process checks using precision measuring tools (calipers, micrometers, scales) to verify dimensional accuracy and cut quality against strict tolerances., • Material Handling & Safety: Safely and efficiently move, load, and stage incoming and outgoing materials using powered industrial equipment, including overhead cranes, forklifts, and pallet jacks., • Preventative Maintenance: Perform routine operator-level maintenance and ensure the workspace and machinery are clean, organized, and running optimally to maintain a safe work environment., • High school diploma or equivalent required., • Previous experience operating automated cutting or CNC machinery in a manufacturing environment., • Proven ability to accurately read and interpret measuring scales, blueprints, and engineering schematics., • Proven ability to accurately read and interpret measuring scales, blueprints, and engineering schematics., • Proficiency in using precision measuring instruments (calipers, micrometers)., • Strong and unwavering safety awareness with strict adherence to all established safety protocols (LOTO, PPE, etc.)., • Ability to safely lift, push, and pull materials up to 50 lbs. and stand for extended periods., • Medical, dental, and vision insurance for you and your family, • Competitive salary, • Bonus programs, • 401K retirement plan, • Training opportunities, • Tuition reimbursement, • Paid vacation, PTO, and holidays The Dixon Group is committed to protecting the privacy rights of its employees and job applicants to the fullest extent required by applicable law. To that end, personal information will be collected solely for those legitimate business purposes recognized by law, and then maintained in a manner consistent with all applicable laws and regulations pertaining to document retention requirements. The Dixon Group does not sell personal information to third parties, and does not share such personal information with third parties except when authorized by law to do so (e.g., in response to a lawful subpoena; mandatory tax reporting; etc.)

Job DescriptionBenefits: • 401(k), • Dental insurance, • Free uniforms, • Health insurance, • Operate laser robotic drilling systems to perform precise drilling operations on steel pipes., • Use HMI systems to control, monitor, and adjust machine operations and process parameters., • Monitor machine performance, troubleshoot issues, and perform minor mechanical adjustments as needed, • New part number changing over and setting up., • Perform quality checks using inspection tools (calipers, gauges, measuring tape, and microscopes) to ensure parts meet specifications., • Read and interpret blueprints, technical drawings, and production work orders., • Maintain a clean, safe, and organized work area in compliance with company safety policies., • Perform routine preventative maintenance on equipment and report malfunctions to maintenance or engineering., • Record production data and complete all required documentation accurately and on time., • Collaborate with team members, engineers, and supervisors to continuously improve processes and machine performance., • Follow all standard operating procedures (SOPs), safety protocols, and company policies., • Create "Lesson Learned" cards or documentation whenever a problem is solved to capture corrective actions and help reduce future downtime., • Manage spare parts inventory and usage, ensuring critical components are available to prevent production line stoppages due to part shortage, • Take ownership of daily production output and defect rate, ensuring performance targets are met or exceededQualifications:, • High school diploma or GED is required, and technical or vocational training in manufacturing a plus., • HMI (Human-Machine Interface) experience is required., • 13 years of experience in a production, CNC, or robotic equipment operation role preferred., • Familiarity with automated manufacturing systems or laser drilling machinery is strongly preferred., • Ability to read and understand mechanical drawings and specifications., • Basic understanding of machine programming is a plus., • Strong attention to detail and commitment to producing high-quality work., • Comfortable working in a fast-paced, hands-on manufacturing environment., • Ability to lift to 40 lbs. and stand for extended periodsSkills and Attributes:, • Mechanically inclined with strong problem-solving skills, • Dependable, punctual, and safety-conscious, • Excellent communication and teamwork abilities, • Willingness to learn and adapt to new technology and processes

Job DescriptionPlasma Table OperatorTemp-to-HirePay rate $20.00Hours 7:00 to 3:30pm Key Responsibilities:The responsibilities of the Plasma Table Operator include but are not limited to the following:• Ability to fully operate assigned CNC plasma cutting platforms which includes setup, run, monitor,troubleshoot and perform preventative maintenance.• Anticipates, oversees, reviews, and completes setup adjustments to ensure 1st article success.• Inspecting material to specifications of job and able to make necessary adjustments and toolchanges to maintain quality specifications.• Efficient operation of the numerically controlled burning machine by challenging the capabilities of themachine and maximizing the utilization of the material consumed.• Troubleshoot faults/failures leveraging understanding of machine programming logic and machineoperational parameters and capabilities.• Ability to change programs, fault diagnosis, troubleshooting, and torch maintenance.• Responsible for burning various materials as defined by the job orders, verification of burning accuracywhile minimizing the effects of wasted materials, and to optimize production, quality, and efficiency.• Confirm order requirements are met, including the proper selection of job priority, material selection,material alignment, gas flows, speed, and program loading.• Take a key role in machine upkeep, machine health, and reliability through proactive participation in dailyand continual preventative maintenance activities.• Maintain regular communication with fellow burn table operators and leadership, relaying any relevantinformation, including material, paperwork, supplies, inventory, quality, productivity, equipment, andpersonnel issues that have or could impact the machine operation.• Identify, escalate, issue non-conformance while maintaining focus on minimizing scrap and reworkoperations.• Accurately complete necessary paperwork and time sheets to effectively manage inventory and job cost.• Keep personal and common work areas clean and organized.• Perform other duties and cross-train as assigned by supervision.• Regularly lift at least 50 lbs.• Assist with project work as directed by Supervisor and Department ManagerEducation• High School Diploma, GED or equivalentSkills & Experience• 3 + years of prior manufacturing experience with a Steel or Aluminum manufacturer preferred fabricationexperience operating complex CNC controlled machines, overhead crane operation, metal processing, andmaterial handling equipment.• Able to read, interpret and comprehend blueprint drawings.• Able to add, subtract, multiply and divide by 10’s and 100’s without the use of a calculator.• Ability to work in a fast-paced, high-speed environment, follow all operating procedures, and adhere to safety work practices in a continuous improvement focused environment.• Able to read, write and speak in English language.Key Competencies:• Proficient in safety regulations and quality control related items.• Must have sufficient visual acuity and clear speech to perform the essential functions of the job effectively.• Able to learn, organize and prioritize work, as necessary.• Stand/bend/stretch/reach/kneel/crawl/climb.• Must have a reliable means of transportation to and from construction jobsites and/or shop.• Ability to work effectively as a team member, establish and maintain cooperative working relationships.• Ability to manage and solve problems.• Possess a positive attitude and a strong work ethic.

Job Description SCA Sign Group is looking for an experienced sign fabricator to join our busy sign shop. We are looking for a candidate to assist with the the tasks and responsibilities listed below. If you do not have previous sign fabrication experience PLEASE DO NOT APPLY! • Plans, prepares, and uses materials to be cut in a matter to keep waste to a minimum, • Operates metal cutting equipment to accurately cut materials to job specifications, • Operates welding equipment to weld sign parts together, • Implements and maintains quality control and safety during material handling, cutting, and welding, • Sands, grinds, polishes, and cleans cut materials, • Layout materials to be used for skinning/covering sign structure, • Operates Accubend Channel Letter Machine and Clincher, • Operates CNC Router, • Ability to fabricate using various types of sign materials – wood, metal, acrylic, diabond, coroplast, etc., • Familiar with pylon signs, channel letters, sign cabinets, FCO letters, ADA signage and more, • Bends and shapes sign parts by hand or by using brakes according to job specifications, • Drills, rivets, screws, or adheres sign parts together, • Repair products by dismantling, straightening and reshaping., • Operates skid steer for moving and positioning materials and supplies, • Maintains a safe working environment, • Maintains a clean and orderly work area, • Complete all Tasks, and To-Dos as assigned by your supervisor

Malone Healthcare - Nursing is seeking a travel Cath Lab Technologist for a travel job in Pasadena, Texas. Job Description & Requirements • Specialty: Cath Lab Technologist, • Discipline: Allied Health Professional, • Start Date: 01/15/2026, • Duration: 13 weeks, • 40 hours per week, • Shift: 10 hours, days, • Weekly pay, • Holiday Pay, • Guaranteed Hours, • Continuing Education, • 401k retirement plan, • Pet insurance, • Referral bonus, • Medical benefits, • Dental benefits, • Vision benefits, • License and certification reimbursement, • Life insurance

ADEX Healthcare Staffing LLC is seeking a travel nurse RN OR - Operating Room for a travel nursing job in Pasadena, Texas. Job Description & Requirements • Specialty: OR - Operating Room, • Discipline: RN, • Start Date: 12/15/2025, • Duration: 13 weeks, • 36 hours per week, • Shift: 12 hours, days, • Employment Type: Travel RN Position Job Notes: \n\n Travel or Local Registered Nurse needed for ASAP start. A minimum of 2+ years of recent hospital bedside experience is required. Candidates must be able to start within 5 weeks. Opportunity for extension upon successful completion of the initial assignment. $750 referral bonus available. \n\n Opportunity: \n RN - OR \n\n Job Details: \n Adex Job ID #967826. Pay package is based on 12 hour shifts and 36 hours per week (subject to confirmation) with tax-free stipend amount to be determined. About ADEX Healthcare Staffing LLC ADEX has been placing healthcare professionals across the US since 2004. Originally founded in Atlanta, GA, the company's headquarters are now located in Tampa, FL. JCAHO certified since 2009. Benefits • Referral bonus

ADEX Healthcare Staffing LLC is seeking a travel Cath Lab Technologist for a travel job in Pasadena, Texas. Job Description & Requirements • Specialty: Cath Lab Technologist, • Discipline: Allied Health Professional, • Start Date: 01/12/2026, • Duration: 13 weeks, • 40 hours per week, • Shift: 10 hours, days, • Employment Type: Travel Allied Position Job Notes: \n\n Travel or Local Allied Healthcare Professional needed for ASAP start. A minimum of 2+ years of recent hospital bedside experience is required. Candidates must be able to start within 5 weeks. Opportunity for extension upon successful completion of the initial assignment. $750 referral bonus available. \n\n Opportunity: \n Cath Lab Technologist - Cardiac Cath Lab \n\n Job Details: \n Adex Job ID #971485. Pay package is based on 10 hour shifts and 40 hours per week (subject to confirmation) with tax-free stipend amount to be determined. About ADEX Healthcare Staffing LLC ADEX has been placing healthcare professionals across the US since 2004. Originally founded in Atlanta, GA, the company's headquarters are now located in Tampa, FL. JCAHO certified since 2009. Benefits • Referral bonus

Job DescriptionJob SummaryThe Maintenance Technician is responsible for maintaining, troubleshooting, repairing, and upgrading all mechanical, electrical, and facility-related systems and equipment. This role combines core functions of electrical, mechanical, and general facility maintenance to support a high-performance manufacturing environment. Responsibilities will include both preventative and corrective maintenance on industrial machinery and building infrastructure. Job Duties and Responsibilities • Responsible for the maintenance, repair and installation of industrial equipment and machinery., • Constructs and fabricates replacement parts to repair equipment using hand tools, power tools, and shop equipment., • Troubleshoot hydraulic and pneumatic controls and systems., • Performs preventative and predictive maintenance using a Computerized Maintenance Management System (CMMS)., • Plans mechanical assembly of equipment and components., • Interfaces with operations, maintenance, and various technical disciplines to develop and resolve issues with project requirments., • Troubleshoot NCs and drives on CNC equipment., • Diagnoses equipment or machinery and conducts assessments and testing for unstable equipment to advise on operational readiness., • Completes various electrical projects requiring knowledge of AC/DC electrical systems from 5VDC - 600VAC single and three phase., • Programs and troubleshoots Programmable Logic Controller (PLC) equipment across multiple platforms., • Builds, installs, and troubleshoots electrical panels., • Reads and interprets electrical schematics and wiring diagrams accurately to identify, isolate, and repair system issues., • Applies a strong understanding of electrical circuitry, motor controls, starters, Variable Frequency Drivers (VFDs), and power supplies in daily work., • Follows Lockout/Tagout (LOTO) procedures and other safety protocols in accordance with OSHA and NFPA 70E standards., • Orders specialized supplies and equipment as needed., • Stays informed of OSHA jobsite and manufacturing plant safety requirements., • May perform other duties as assigned by the supervisor. Job SpecificationsSkills:, • Strong understanding of electrical circuitry., • Proficiency in reading and interpreting electrical schematics and wiring diagrams., • Knowledge of Lockout/Tagout (LOTO) procedures., • Familiarity with electrical panel building, motor controls, starters, VFDs, and power supplies., • Ability to troubleshoot NCs on CNC equipment., • Knowledgeable in wiring/editing PLC programs on multiple platforms and ladder logic troubleshooting., • Knowledgeable in AC/DC electrical systems from 5VDC - 600VAC single and three phase., • Knowledgeable in NFPA 70E and OSHA manufacturing safety expectations., • Ability to prioritize tasks and work independently or within a team environment., • Intermediate computer skills in Microsoft Office., • Required: High school diploma or equivalent required, • Preferred: 2 or 4-year degree in mechanical, technical, or related degree., • Preferred: Certification in related trade school.Work Experience:, • Required: 2 years of previous work experience in building systems (electrical, heating, or plumbing)., • Preferred: 2 years of general work experience in carpentry, plumbing, air conditioning., • Preferred: Previous work experience in troubleshooting mechanical, pneumatic, hydraulic, and electrical circuits. Physical Requirements:, • Ability to lift, climb, bend, stoop, push, and pull frequently., • Ability to lift a minimum of 50 lbs. of equipment (pumps, tools, ladders) and safely install rigging/lifting devices., • Ability to regularly crouch and reach to install/move equipment by bending forward at the waist or by bending legs and spine., • Ability to move between departments, and properties to facilitate work., • Able to read blueprints and schematics., • Clear and effective communication skills, both verbal and written., • Ability to work in cold, hot, and or dusty environment, with noisy conditions and occasionally outside in the elements., • Must be able to travel for maintenance support at branch locations., • Continuous standing and/or walking., • Good eye/hand/ foot coordination.Benefits:, • PTO - Vacation and Sick time, • 11 Paid Holidays, • Medical, Dental, and Vision Insurance, • 401K with Match XzUS9Ylxuj

Job Description CNC Maintenance Tech Pay: $90k-$120K Location: Houston, TX 77073 Qualifications • Demonstrated experience in electrical and/or electronic and mechanical maintenance including motors, controls, power supplies, AC/DC theory, power distribution, PLC's, hydraulics/pneumatics, lubrication, and power transmissions., • Demonstrated ability to follow all established safe work procedures including, but not limited to personal protection equipment, safety lockout/tag-out, confined space, and elevated work areas. Responsibilities • Ensures operation of CNC machines and mechanical equipment by completing preventive maintenance requirements on machining lathes and mills, motors, pneumatic tools, and production equipment; following diagrams, sketches, operations manuals, manufacturer's instructions, and engineering specifications; troubleshooting malfunctions., • Locates root cause of problems by using sound troubleshooting methods to ensure that permanent repairs can be made to minimize costly downtime., • Install, service, troubleshoot, and repair all types of machine control components including, but not limited to; motor drives, controllers, sensors, switches, breakers, overloads, power supplies, etc, • Install, service, troubleshoot, and repair all types of power. transmission components including, but not limited to; drives, bearings, gears, belts, chains, sprockets, etc., • Install, service, troubleshoot, and repair hydraulic systems including, but not limited to: tanks, pumps, valves, piping, cylinders, and controls., • Provide proper record keeping, documentation, and information for, but not limited to Machine files, repair files, • Comply with safety regulations and maintain clean and orderly work areas., • Read and interpret blueprints, technical parts manuals such as electrical and mechanical diagrams, gages, meters, calipers and other measuring tools., • Use all required hand and power tools including, but not limited to: drill, saw, torch, and jacks, as well as ladders, cranes, fork lift, and other maintenance equipment., • This position is very active and requires standing, walking, bending, kneeling, stooping, crouching, crawling, and climbing during shift., • Proactively attains a safe and healthy work environment for all employee., • Bachelor’s or associate Degree in technical related field of study preferred., • 3-5 years of experience in electrical and mechanical troubleshooting and maintenance of CNC machine tools., • Experience working with EMAG, OKUMA, MAZAK and MORI SEIKI machines, Fanuc, Mitsubishi, and/or Siemens and controls are a PLUS Powered by JazzHR oN92rG5QSj

Job Description Powell is an engineer to order manufacturer of switchgear. We are seeking an experienced Senior Industrial Maintenance Technician to join our team at our facility located in Houston, TX, 77075. Powell is an engineer to order manufacturer of switchgear. We are seeking an experienced Industrial Maintenance Technician to join our team. The Maintenance Technician will perform routine and preventative maintenance and repair manufacturing and fabrication equipment, including CNC Laser Cutting and CNC Turret Punch Press equipment, Robotic Welding equipment, Automated Material Handling equipment, and Automated Powder Coat Painting equipment. Multiple shifts available! Click on link(s) below to apply directly to company website! 2nd Shift: Mon-Thurs 2:00pm-12:45am Apply here: Industrial Maintenance Technician - Powell Career Site Careers 3rd Shift: Mon-Fri 10:00pm-6:30am Apply here: Maintenance Technician 3rd Shift - Powell Career Site Careers Essential Responsibilities * Reading assembly drawings, schematics, and equipment layouts. * Maintaining, diagnosing, troubleshooting, and repairing electrical circuits. (occasional) * Maintaining, diagnosing, troubleshooting, and replacing control devices. * Maintaining, diagnosing, troubleshooting, and replacing hydraulic equipment, circuits and components. * Maintaining, diagnosing, troubleshooting, and replacing pneumatic systems. * Must be able to look up parts from equipment drawings, schematics and parts lists. * Must be able to understand our Computerized Maintenance Management System (CMMS) and be able to conform to our work order procedures. * Adhering to all plant safety and environmental guidelines, policies and procedures. * Requires working with a wide variety of other job groups and involves working around traffic, heights, electricity, hydraulics, and heavy equipment including moving parts. * Assisting crew members and working in a team environment. Minimum Qualifications *Required Experience is Proportionate with the selected job level: The Industrial Maintenance Tech level 1 * The Senior Industrial Maintenance Tech Skills, Abilities & Other Requirements * Must be able to efficiently and effectively use a computer, CMMS and related software related to record-keeping and machine troubleshooting/maintenance. * Strong mathematical ability is essential. * Must be self-driven and able to drive organizational change. * Must work well in a team environment. * Must be willing to learn and perform with minimal direction. * Must have mechanical and electrical knowledge. * Must have basic computer skills: Microsoft Suite * Must be fluent in English with good written and verbal communication skills. * Must have manual dexterity. * Ability of strong mechanical aptitude. * Ability to read mechanical and electrical schematics. * Ability to troubleshoot and repair low voltage (12 v DC) – high voltage (480 v AC 3 Phase) electrical systems. * Ability to visually and mentally make priority decisions and independent judgment calls based on the situation at hand. * Ability to work long hours and weekends. * Ability to operate hand and power tools, industrial machines, digital cameras, phones, scanners, tools, and controls in a safe manner. * Ability to work and concentrate in a noisy environment. Working & Environmental Conditions * Safety sensitive position in a temperature-controlled manufacturing or industrial environment with occasional outside activities. * Required to wear personal protective equipment (PPE) (i.e., safety shoes, hard hats, bump caps, safety glasses, hearing protection, safety harnesses as required) and respirators when required. * Must be able to work from all types of ladders (step ladders, "A" frame ladders, etc.) * Specific vision abilities required include close vision, distance vision, color perception, peripheral vision, depth perception, and ability to adjust focus, hand-eye coordination. * Working at heights usually no higher than 20 feet in the air on an elevated structure using proper lift equipment and Fall Protection Equipment. * Able to maintain body equilibrium and agility to prevent falling when walking, standing, crouching, ascending or descending stairs or step ladders. * Bending the body at the waist, the legs at the knees, and extending arms and hands in any direction * Continuous standing and walking * Able to use upper extremities frequently, work with both arms above shoulders and use both arms at full length frequently. * Must be able to meet physical lifting demand up to 50lbs. * Frequent use of hand tools and power tools More Information This job description outlines the essential functions of the job and does not contain a comprehensive list of all possible responsibilities, tasks, and duties. You should be proficient in: • Mechanical Troubleshooting Skills, • Pneumatics Experience, • 120/208/240/480 Voltage Systems, • Hydraulics Experience, • Electrical Troubleshooting

Job DescriptionCompany Description John Crane, a business of Smiths Group, is a global leader in mission-critical flow control solutions for energy and process industries that enable efficient and sustainable operations. Our products include mechanical seals and systems, couplings, bearings, filtration systems, and predictive digital monitoring technologies. We have a global network of more than 200 sites in over 50 countries and employ more than 6,000 people worldwide. We partner with our customers to help them keep their operations safe, reduce downtime, improve efficiency, and meet the latest environmental standards. John Crane is part of Smiths Group. For over 170 years, Smiths has been pioneering progress by engineering for a better future. We serve millions of people every year, helping to create a safer, more efficient, productive, and better-connected world across four global markets: energy, security & defence, space & aerospace, and general industrial. Listed on the London Stock Exchange, Smiths employs approximately 16,000 colleagues in over 50 countries. Job Description Previous experience repairing CNC machines is needed. • Complete preventative maintenance on all facility equipment to include CNC lathes and mills, manual lathes and mills, and other facility equipment., • Analyzes machine problems by using troubleshooting techniques, repair manuals, drawings or manufacturers’ specifications to determine logical approach to correct the problem., • Disassembles machines to find & replace worn or damaged parts and reassembles., • Utilizes measuring instruments such as micrometer, caliper, dial indicator and precision level will be required., • Relocates, installs, and aligns machines and equipment., • Coordinate and schedule third party vendors for repairs and maintenance as needed., • Perform duties in accordance with company safety policies., • Additional duties as assigned.Qualifications, • High school diploma or equivalent required, • Previous experience as a CNC machinist is preferred, • Experience repairing Mazak and Haas equipment is a plus, • Minimum of 3 years of previous related or subordinate experience, • Vocational/Technical Certification preferred, • Ability to read and interpret average assembly and machine drawings, • Ability to obtain a certification to drive power industrial vehicles (forklift & scissors lift), • Attention to detail and strong problem-solving skills, • Ability to effectively communicate, • High level of analytical ability, • Ability to work in a diverse environment, • Complete all work in a safe manner and follow all safety requirements consistent with supporting the Company’s goals., • Lifting guidelines in accordance with the Manual Lifting Guidelines noted in the Safety Handbook., • Follow all environmental requirements consistent with supporting the company’s environmental performance goals., • Complete, and actively participate in all other EHS training requirements. Additional Information With colleagues stretching across the globe, we are proud of our diversity. To foster inclusivity, we run employee resource groups (ERGs) to provide a safe space for employees to connect and support each other. Our cross-business ERGs include Veterans, Pride Network, Black Employee Network, Women@Work Network, and Neurodiversity. Across our company, we recognize excellence, culminating in the Smiths Excellence Awards, our annual celebration of the most extraordinary activities, people, and projects that best showcase our strengths and help drive our business forward. We announce these on our annual Smiths Day, a global celebration of Smiths around our network. Join us for a great career with competitive compensation and benefits, while helping engineer a better future. We believe that different perspectives and backgrounds are what make a company flourish. All qualified applicants will receive equal consideration for employment regardless of color, religion, sex, sexual orientation, gender identity, national origin, economic status, disability, age, or any other legally protected characteristics. We are proud to be an inclusive company with values grounded in equality and ethics, where we celebrate, support, and embrace diversity. At no time during the hiring process will Smiths Group, nor any of our recruitment partners ever request payment to enable participation – including, but not limited to, interviews or testing. Avoid fraudulent requests by applying jobs directly through our career’s website (Careers - Smiths Group plc)

Job Description Senior Industrial Maintenance TechnicianKey Responsibilities- Perform routine, preventive, and corrective maintenance on manufacturing equipment. • Diagnose and repair mechanical, electrical, hydraulic, and pneumatic systems., • Read and interpret assembly drawings, schematics, and equipment layouts., • Maintain and repair control devices and electrical circuits (12 V DC – 480 V AC)., • Utilize CMMS to manage work orders and track maintenance activities., • Collaborate with team members to support production and maintenance goals., • Operate hand and power tools, industrial machines, and other equipment safely., • Ability to read schematics, blueprints, and parts lists., • Skilled in troubleshooting low- and high-voltage electrical systems, hydraulics, and pneumatics., • Proficient with computers and maintenance software (CMMS, Microsoft Office)., • Strong mechanical aptitude, problem-solving skills, and manual dexterity., • Effective communication, teamwork, and independent decision-making abilities., • Requires PPE such as safety shoes, hard hats, safety glasses, hearing protection, and fall protection equipment., • Tasks may involve climbing ladders, bending, crouching, and working at elevated positions., • Pneumatics and hydraulics maintenance, • CNC and automated equipment maintenance $35 - $35 / hr

Job Description Day shift positions $18-$28/hr. Depending on experience, can go up for highly qualified candidates. 77073 We are looking for CNC machinist for the mill and lathes for three different shops. We are looking for candidates with extensive knowledge of machining. Machined parts in the oil & gas industry. Needs to be very familiar with reviewing a print, setting up the machine with the proper tooling, programming when necessary using the machine code, adjusting more complicated programs done offline when needed, and of course getting parts done quickly and accurately. Mechanically inclined and can understand what a customer is asking us to do, think outside the box to come up with a solution, and get the task at hand accomplished in a timely manner. We also have Brake Press positions available as well. Company DescriptionSkilled Craftsmen of Texas, Inc. is a premier industrial staffing service for the Greater Houston and DFW area and we have just opened an office in Arlington. Our customer base consists of some of the World’s largest manufactures as well as the small to medium sized companies. We can help you find the dream job that you have been looking for. We are searching for individuals that are highly motivated, willing to learn, and are looking for a challenge.Skilled Craftsmen of Texas, Inc. is a premier industrial staffing service for the Greater Houston and DFW area and we have just opened an office in Arlington. Our customer base consists of some of the World’s largest manufactures as well as the small to medium sized companies. We can help you find the dream job that you have been looking for. We are searching for individuals that are highly motivated, willing to learn, and are looking for a challenge.

Job Description Machinist Lunar Resources, America’s leading space industrial company, is pioneering space manufacturing, off-earth resource extraction, and in-situ resource utilization. A corporate spin-off from various NASA-sponsored technology development programs, Lunar Resources objective is to enable the economic utilization of space’s resources to enable humanity to build off earth. Machinist (Space Manufacturing Technologies and Resource Extraction Technologies) The space manufacturing and resource extraction teams are responsible for developing a range of technologies to extract, manufacture, and fabricate materials in microgravity and the Moon. As a responsible machinist at Lunar Resources, you will work with a multidisciplinary group of engineers, material scientists, electrochemists and metallurgists. RESPONSIBILITIES: • Program and machine high precision, quick turn projects., • Look critically at all part processes to drive efficiency and improve quality by interfacing with engineers and designers., • Complete machining operations from blueprints, drawings, verbal instructions, and models., • Set up, operate, and prove-out programs on a variety of equipment including, but not limited to CNC mill (horizontal and vertical spindle), CNC lathe, manual mill/lathe and all other typical machine shop equipment., • High school diploma or equivalency certificate., • 3+ years of professional experience running CNC mills or lathes., • Ability to diligently run multi-axis and multi-tasking programs., • Proficiency with typical precision measurement tools such as dial indicators, bore gauges, micrometers, calipers, and other common inspection tools., • Basic knowledge of cutting tools, as well as speeds and feeds for each, regardless of material type., • Experience with Fanuc, Hurco, and Haas machine tool controls., • Experience with manual lathes, knee mills, and various other manual equipment., • Ability to read engineering prints, proficient interpretation of GD&T feature interpretation., • Basic knowledge and experience developing work holding and fixturing solutions required to complete quality, repeatable Parts., • Desire to work collaboratively across several teams as needed to complete projects requiring multiple disciplines., • Extended hours and weekend work may be required to support critical project and mission milestones., • Excited to work in a startup company culture and atmosphere., • This position is located at Lunar Resources' facility in Houston, TX.

Job Description We’re hiring a skilled CNC Machinist to join a reputable manufacturing company based in Southeast Houston, TX. You’ll work in a clean, well-organized environment where quality craftsmanship and continuous improvement are deeply valued. Essential Job Responsibilities • Follow all engineering instructions, standard operating procedures, and departmental policies., • Perform machine setups on manual lathes, manual mills, CNC lathes, CNC mills, and waterjet machines for all programs and part types, including production and engineering parts, with minimal supervision., • Maintain a clean, safe, and organized work area in compliance with safety regulations., • Conduct preventive maintenance on equipment according to the company’s P.M. program., • Machine safety standards and procedures, • Job orders and work instructions, • Proficiency with precision measuring instruments, including micrometers (OD/ID), calipers, bore gages, protractors, height and micro-height gages, depth gages, optical comparator, and mold measurement tools, • Verification of gage calibration, • Machine fixturing and setup techniques, • Advanced knowledge of CNC programming and languages, including G/M codes and Mazatrol, with the ability to create and modify programs, • Minimum of 7 years of experience operating manual and/or CNC machines, • Ability to follow written and verbal instructions in English, • Ability to lift up to 25 pounds and perform physical tasks such as standing, reaching, and moving throughout the facility

Job Description JOB DESCRIPTION – CNC Machinist Organization UPG Company LLC Position CNC Machinist Direct Reports None FLSA Hourly Employees Progress Level Employee Position Location 7865 Northcourt Rd, Suite #100, Houston, Texas 77040 Website Company Overview UPG is a global manufacturer of complex assembled components and finished products serving the datacenter, automotive, energy, and industrial markets. UPG products are sold to over 40 global blue-chip customers and the company has developed a strong market position based on its technical expertise combined with unparalleled quality, delivery, and service levels. UPG operates three world-class manufacturing facilities – in Houston, Texas; Cardiff, Wales; and Suzhou, China – that offer a complete range of capabilities, including product design, engineering, rapid prototyping, and plastic injection molding, along with a suite of other technology platforms, value-added assembly, and global supply chain management. Reporting Relationship Reports to the General Manager Core Function The CNC Machinist will program, set up, and operate CNC milling and turning centers to produce precision components used in tooling and production for UPG’s plastic injection operations. This position requires a self-motivated individual capable of taking projects from blueprint to finished part with minimal supervision. Responsibilities • Develop CNC programs using CAM software (Mastercam preferred) for 3-axis vertical/horizontal milling centers and turning centers, • Interpret blueprints, CAD models, GD&T, and work instructions to determine optimal tool paths, speeds, feeds, and fixturing, • Select, preset, and load cutting tools; perform tool life management and offset adjustments, • Set up machines, including work-holding, tool holders, probing, and establishing work offsets, • Perform in-process inspections using precision measuring tools (micrometers, calipers, CMM, bore gages), • Edit G-code at the control (Fanuc, Haas, or Siemens) to optimize cycle time and surface finish, • Conduct first-article inspections and obtain quality approval before full production runs, • Troubleshoot machining issues such as chatter, poor finish, dimensional drift, or tool breakage, • Maintain accurate setup sheets, tool lists, and program revision logs, • Follow safety rules, report safety problems and all injuries, regardless of severity; ensure plant safety and 5S housekeeping standards are maintained., • Participate in continuous improvement events to reduce cycle time and waste, • Document and report non-conformances; support root cause analysis and corrective actions, • Maintain program backups and version control in shared network drives, • Coordinate with engineering on ECNs (Engineering Change Notices) and prototype runs Education Requirements High School Diploma or General Education Diploma; and 2-Year Technical Degree in CNC Machining, Manufacturing Technology, or related field. Experience can be substituted for education. Training Requirements Formal training in Mastercam (or equivalent CAM software) and G-code programming from an accredited technical college or apprenticeship program is preferred. NIMS or Mastercam certification is a plus. Experience Requirements Minimum 4 years of combined CNC programming and machine operation experience on 3-axis mills and/or lathes in a production environment. Must be able to program from scratch and run production independently. Experience in a high-mix, low-to-medium volume shop preferred. Skills Requirements • Proficient in Mastercam (or Fusion 360/Siemens NX) for 3-axis toolpath generation, • Strong G-code and M-code knowledge with hands-on editing capability, • Blueprint reading with GD&T proficiency, • Setup and operation of 3-axis CNC mills (Haas, DMG Mori, Doosan preferred), • Precision measurement and inspection techniques, • Fixture design and work-holding solutions, • Basic preventive maintenance on CNC machines (spindle, way covers, coolant systems), • Familiarity with ERP/MRP systems for job tracking, • Proficient in Microsoft Office (Excel, Word) for documentation Core Competencies Analytical; Attention to Detail; Drive for Results; Safety Focus; Continuous Learning; Team Collaboration; Problem Solving Physical Requirements Medium Work - Exerting up to 50 pounds of force occasionally, and/or up to 20 pounds of force frequently, and/or up to 10 pounds of force constantly to move objects. Visual Acuity The worker is required to have close visual acuity to perform an activity such as; preparing and analyzing data and figures; transcribing; viewing a computer terminal; extensive reading; visual inspection involving small defects, small parts, and or operation or machines (including inspection); using measurement devices; and/or assembly or fabrication of parts at distance close to the eyes. Work Conditions The worker may be exposed to typical manufacturing conditions, including noise, dust, and mechanical hazards, and must follow all safety protocols and wear required PPE. AAP/EEO Statement Equal Opportunity Employer: Disability/Veteran

Job Description Job Responsibilities • Responsible for producing quality parts on CNC machines, including but not limited to lathes and milling machines, in a timely, safe, and efficient manner, • Operate CNC machines, perform setup changes, and conduct first article inspections for production runs, • Load parts using overhead lifting equipment, • Prove programs, operate controls, set offsets, perform simple program edits, deburr parts, and inspect finished components to ensure conformance to requirements, • Identify potential issues prior to production runs; start and observe machine operation to detect malfunctions or out-of-tolerance conditions and make necessary adjustments, • Read and interpret blueprints, job orders, and precision measuring instruments to determine dimensions, tolerances, and tooling requirements, • Maintain working knowledge of tooling instructions, including fixtures, feed rates, cutting speeds, depth of cut, and appropriate cutting tools, • Prove out new programs and perform simple edits to NC programs on one or more CNC machines, • Maintain a clean and organized work area and perform basic preventive maintenance on equipment, • Perform other work-related duties as assigned, • Comply with all Company and Health, Safety, and Environmental (HSE) policies and procedures Behavioral Competencies • Ability to adapt to a fluctuating work environment, • Ability to work in a fast-paced manufacturing environment, • Willingness to work weekends and overtime as required, • Effective communication skills, • Must be reliable and punctual Technical Competencies • Knowledge of CNC machine setup and operation, • Ability to edit CNC programs, • Ability to read and interpret blueprints and specifications, • Knowledge of dimensional and tolerance measurements, • Proficiency with precision measuring instruments, • Basic computer skills, • Working knowledge of various tool holders, cutting tools, boring bars, and inserts used across multiple machines, • Advanced ability to read drawings and specifications, including geometric dimensioning and tolerancing (GD&T), • Advanced knowledge of precision measuring instruments, including but not limited to calipers, ID/OD micrometers, depth gauges, indicators, and tape measures, • Advanced understanding of programmed segments and corresponding machine operations Benefits · Insurance Benefits Education & Experience • Education certification NOT Required, but MUST possess the following:, • Ability to analyze situations, identify potential issues, and take appropriate corrective action, • Demonstrates practical, hands-on problem-solving ability in a manufacturing environment, • Ability to recognize abnormal conditions and respond appropriately, • Safety-focused (very effective for CNC roles), • Ability to exercise good judgment and situational awareness while operating machinery, • Applies logical thinking to ensure safe and efficient machine operation, • We will also assist and provide training if there is any aspect to the job duties that you may not be 100% confident in., • Must be able to read/write English, • Up to 1 year industry experience

Job Description Sunbelt Supply is a global provider of flow control solutions. We maintain one of the largest and most diversified selections of valves, actuators, actuation accessories and specialty PFF in North America, comprised of more than 50 major manufacturers. We provide in-house valve automation services, including CAD design and drawings, machine, fabrication, assembly shops featuring CNC machinery, and automation repair work. Sunbelt Supply is also an authorized Automation Service Center for Velan, Bettis and Limitorque and many more. Sunbelt Supply is a subsidiary of FloWorks International LLC, which is a privately held company located in Pasadena, Texas. Summary of Responsibilities The role of Capital Projects Inside Sales Account Manager focuses on managing manual valve sales efforts for large-scale EPC Capital Projects in the Oil & Gas, Chemical, Refining and LNG sectors. The Inside Sales Account Manager position will play a key role in driving revenue growth through sales and support of these large-scale projects. Major Tasks, Responsibilities and Key Accountabilities • Manage and grow sales for EPC based accounts., • Collaborate with outside sales, EPC procurement and engineering teams, and vendors to ensure alignment on project scope, technical specifications, timelines, and customer requirements., • Review and interpret bid packages, drawings, and technical specifications to ensure product selection and competitive pricing., • Develop detailed quotations and proposals, based on customer specifications, requirements and timeline., • Answer questions about products, as well as technical and commercial terms., • Interact with customers, vendors, and associates to resolve customer and service-related issues., • Track and manage timelines using CRM tools and internal systems to ensure timely follow-up and closure., • Serve as primary point of contact for customers throughout the project lifecycle, working with an internal support team to provide regular updates, address questions and ensure high levels of customer satisfaction., • Coordinate with internal teams (operations, finance, etc.) to ensure timely order fulfillment and delivery within project schedules., • Develop relationships with customers, vendors and internal/external team members. Preferred Qualifications • Inside Sales/Capital Project/Technical manual valve experience., • Experience with EPC’s and Capital Projects., • Ability to review, comprehend and relay technical requirements received from the customer. Qualifications • Typically requires BS/BA in related discipline. Generally, 5-7 years of experience in related field; certification is required in some areas OR MS/MA and generally 2-4 years of experience in related field. Certification is required in some areas. Environmental Job Requirements • Located in a comfortable indoor area. Any unpleasant conditions would be infrequent and not objectionable., • Most of the time is spent sitting in a comfortable position and there is frequent opportunity to move about. On rare occasions there may be a need to move or lift light articles., • Typically requires overnight travel less than 10% of the time. This information indicates the general nature and level of work performed by associates in this role. It is not designed to contain a comprehensive inventory of all duties, responsibilities, and qualifications required of associates assigned to this role. This description supersedes any previous or undated descriptions for this role. Management retains the right to add or change the duties of the position at any time. Questions about the duties and responsibilities of this position should be directed to the reporting Manager or Human Resources. FloWorks is an equal opportunity employer and gives consideration for employment to qualified applicants without regard to race, color, religion, gender, gender identity, sexual orientation, national origin, genetics, disability, age, or protected veteran status. FloWorks is committed to fostering a culture where every individual is valued and empowered to contribute to a shared success. FloWorks participates in the US Government’s E-Verify program.

Job DescriptionAdvanced Containment Systems, Inc. believes in providing an atmosphere that provides an individual the ability to exercise their talents and abilities in a fair and respectful workplace. As a manufacturer of custom transportable products to address the restroom/shower trailer, homeland security, abatement, first responder and military industries, we offer a stable work environment that is not impacted by the oil and gas sector and as an EEO/AA employer we welcome all individuals an opportunity to come and join our growing team in South Houston!CNC Programmer Purpose of the Position: Analyze production schedule and nesting priorities and write complex CNC programs that will be used to manufacture essential component parts. Need to utilize various CNC programming software to convert CAD geometry and blueprints into machine instructions. This will typically involve CNC laser cutting and punching equipment, but it may involve other process equipment such as plasma cutting or bending machines. Essential job functions: * • Writing, creating, and optimizing tool and path programs for manufactured parts., • Developing efficient nests for CNC machines that optimize material utilization and run time., • Work with design and manufacturing engineers to develop the most effective geometry for existing and future process equipment., • Maintain program control such that current design geometry is always used for shop floor programs., • Manage database where programming geometry and programs are stored., • Assess and recommend tooling changes or upgrades based on effectiveness of part programs., • Coordinate with software supplier to ensure that programming software is maintained and current., • Perform additional duties as assigned. Required Knowledge, skills, and abilities: • Proficient at writing complex CNC nesting programs for use in the production process for a minimum of 3 years., • Highly effective at utilizing various CNC nesting and programming software to achieve optimal machine performance. Examples are TruTops, SigmaNest, Radan, and AP100., • Able to exercise independent judgment and discretion to obtain maximum utilization of all raw materials used in the production and manufacturing process., • Able to regularly make decisions regarding matters of significance related to the production process with little or no direct supervision., • Able to utilize a network infrastructure to communicate to machine controls located remotely on the manufacturing floor., • Extensive training and experience in the field of CNC programming., • Experienced with turret punch tooling capabilities and application of tooling across a wide variety of material types and thicknesses., • Experienced with laser and plasma cutting processes., • Ability to handle multiple and frequently changing priorities., • Strong analytical skills and problem solving abilities, as well as good math skills., • Exhibit good character traits such as initiative, excellent attendance, desire to learn, honesty, and a positive attitude Job Posted by ApplicantPro

Job DescriptionCompany Description John Crane, a business of Smiths Group, is a global leader in mission-critical flow control solutions for energy and process industries that enable efficient and sustainable operations. Our products include mechanical seals and systems, couplings, bearings, filtration systems, and predictive digital monitoring technologies. We have a global network of more than 200 sites in over 50 countries and employ more than 6,000 people worldwide. We partner with our customers to help them keep their operations safe, reduce downtime, improve efficiency, and meet the latest environmental standards. John Crane is part of Smiths Group. For over 170 years, Smiths has been pioneering progress by engineering for a better future. We serve millions of people every year, helping to create a safer, more efficient, productive, and better-connected world across four global markets: energy, security & defence, space & aerospace, and general industrial. Listed on the London Stock Exchange, Smiths employs approximately 16,000 colleagues in over 50 countries. Job Description Sets up, writes programs and edits existing programs, and operates numerically controlled machinery. These include but are not limited to lathes, mills, drills, and other machinery as required. • Maintains quality and tolerances within .0003”., • Follow written and verbal procedures for machining and other duties., • Work from work order routings, prints, sketches, layout sheets, written and verbal instructions., • Working knowledge of programming languages and the ability to learn / adapt per machine., • Must be able to recognize and understand functions of machine parameters with the ability to modify as required per supervisor’s instructions., • Utilize knowledge of working properties for a variety of materials such as stainless steel, alloy steel, cast iron, brass, exotics, etc., • Presets tools and may be required to re-sharpen., • Inspect work produced using micrometer; bore gage, venire calipers, or other measuring instruments to verify conformance to specifications., • Follow preventative maintenance procedures on equipment as prescribed by supervisor and report operating difficulties of equipment to supervisor., • Perform duties in accordance with company safety policies, reports unsafe conditions to supervisor., • Make proper labor and time reports., • Perform other duties as required., • Keep machine(s) / work area clean and orderly., • Perform additional duties and responsibilities based upon individual branch requirements., • Additional duties as assigned.Qualifications, • High school diploma or equivalent with a technical school education and working machinist knowledge or equivalent., • Minimum 3 years of CNC machine tool Programming & Operating experience., • Numerical control machining skills experience and ability to read and interpret work related machine drawings., • Make average to complicated mathematical calculations and resolve elementary technical problems., • CNC Programmer/Operator will be compensated in accordance with defined expertise, experience and production efficiency., • Can operate a minimum of 2 CNC machine tools., • Possesses previous experience as a Manual machinist., • Must be detail oriented; be able to work independently using sound judgment., • Good verbal, written, problem solving and organization skills required., • Capable of handling multiple priorities., • Ability to complete tasks in a timely and efficient manner. Additional Information With colleagues stretching across the globe, we are proud of our diversity. To foster inclusivity, we run employee resource groups (ERGs) to provide a safe space for employees to connect and support each other. Our cross-business ERGs include Veterans, Pride Network, Black Employee Network, Women@Work Network, and Neurodiversity. Across our company, we recognize excellence, culminating in the Smiths Excellence Awards, our annual celebration of the most extraordinary activities, people, and projects that best showcase our strengths and help drive our business forward. We announce these on our annual Smiths Day, a global celebration of Smiths around our network. Join us for a great career with competitive compensation and benefits, while helping engineer a better future. We believe that different perspectives and backgrounds are what make a company flourish. All qualified applicants will receive equal consideration for employment regardless of color, religion, sex, sexual orientation, gender identity, national origin, economic status, disability, age, or any other legally protected characteristics. We are proud to be an inclusive company with values grounded in equality and ethics, where we celebrate, support, and embrace diversity. At no time during the hiring process will Smiths Group, nor any of our recruitment partners ever request payment to enable participation – including, but not limited to, interviews or testing. Avoid fraudulent requests by applying jobs directly through our career’s website (Careers - Smiths Group plc)

Job Description POSITION SUMMARY: Vallourec Star is seeking a CNC Operator for threading steel tubes is responsible for setting up, operating, and maintaining CNC machines to thread and chamfer steel tubes according to precise specifications. This role requires a high level of technical skill and attention to detail to ensure the quality and accuracy of the threaded tubes. KEY RESPONSIBILITIES: • Assist in performing setups., • Perform machine adjustments, changeovers, and offset adjustments as needed, • Select and load part programs, and change inserts and tooling, • Perform routine maintenance on CNC machines, including checking and replenishing cooling fluids and making necessary adjustments (CCLs), • Operate CNC lathe in accordance with Vallourec operating instructions., • Use precision gages, micrometers, and other applicable measurement instruments to validate compliance of product., • Always maximize efficiency and productivity, • Responsible for quality of work meeting all requirements, • Follow all Company work instructions, specifications, and requirements, • Follow all Company Rules, Procedures and Policies, • Always place Safety first and follow all Company Safety Rules, • Any other duties as assigned, • Must read, write, and communicate in the English language EXPERIENCE, SKILLS, AND KNOWLEDGE: • Minimum of 1 year experience as a CNC Operator in previous job/or 1 year experience as Production Operator., • Must have a good understanding of machine shop operations and processes., • Ability to read blueprints, micrometers, and other precision measuring instruments., • Ability to understand and execute instructions well., • Must read, write, and communicate in the English language EDUCATION, TRAINING, AND CERTIFICATIONS: • High School diploma or equivalent is preferred CRITICAL COMPETENCIES & CAPABILITIES: • Teamwork, • Adaptability, • Accountability, • Reliability/dependability, • Initiative, • Safety awareness, • Ability to receive and provide constructive feedback, • Pride in performance, • Continuous Improvement/Quality, • Communication, • Positive responses to change, • High attention to detail

Job DescriptionDescription: Are you ready to make an impact? Do you want to be part of a stable and growing organization where you can advance your career? If so, read on! At Trace-A-Matic, we believe our people are our greatest assets! We provide a friendly, clean, and safe work environment where everyone can grow and thrive. Our core focus is achieving excellence in complex precision machined components and ensuring customer satisfaction. Additionally, we offer a Gainsharing program: when the company profits, we share 50% with our employees, paid out quarterly! Plus, all 2nd shift employees receive a 6.65% premium added to their base pay. CNC Machinist Job Overview: Perform setup, operation, and programming of complex machined components for various industries. Responsibilities & Duties: • Set up all repeat jobs that are fully documented., • Run the first piece to print specifications., • Program and make edits as necessary., • Manually inspect parts according to inspection sheet criteria., • Read blueprints to a medium/high level and correlate with inspection protocols., • Apply knowledge of GD&T tolerancing., • Operate multiple machines simultaneously as a production cell., • Utilize advanced shop math, including trigonometry and geometry., • Mentor and train operators., • Comprehensive Health Insurance, • Dental Coverage, • Vision Coverage, • 401K Retirement Plan, • Gain Sharing Program, • Tuition Reimbursement, • 10 Paid Holidays, • Service-Based Paid Time Off (PTO), • Safety Shoe and Safety Glasses Reimbursement Requirements: • High School Diploma; CNC technical diploma preferred., • 5+ years of machining experience., • Strong mechanical aptitude and good math skills., • Willingness to learn and grow. Type: Full Time, 2nd shift (6pm - 6am) Shift Premium: 6.65% Company: Trace-A-Matic Location: Houston, TX Prosource Trace-A-Matic provides equal employment opportunities to all employees and applicants for employment and prohibits discrimination and harassment of any type without regard to race, color, religion, age, sex, national origin, disability status, genetics, protected veteran status, sexual orientation, gender identity or expression, or any other characteristic protected by federal, state or local laws.

Job DescriptionWe’re hiring an Experience CNC Machinist for our Southwest client! We are looking for experienced, reliable, hard-working employees who can interview immediately! DESCRIPTION OF YOUR DREAM JOB: • Job Title: CNC Machinist, • Location: Southwest Houston, • Pay: $18.00 to $25.00 per hour DOE, • Hours: Fri-Sun 5pm-5am (Nights/Weekends), • Duration: Temp to Hire, • Description of Duties: Use CNC Lathe to machine repeat parts with slight variation in size. Lift 15-30lbs repeatedly. Non-climate controlled working conditions. Use calipers, micrometers, etc.

Job DescriptionJOB SUMMARY Rotating Machinery Services, Inc (RMS Inc.) is seeking a qualified CNC Machinist to work 1st shift and perform a variety of machining practices involved in turning, milling, drilling, threading operations, etc. on rotating equipment components (pumps, turbines, compressors, and more) and assemblies to ensure compliance with specifications and quality requirements. JOB REQUIREMENTS AND QUALIFICATIONS • Ability and willingness to be in the shop environment a minimum of 8 hours per day, primarily standing and sitting., • Ability and willingness to work around and use large propane / acetylene., • Ability to operate small lifts, pallet jacks and other lifting equipment (training will be provided on our specific equipment, but basic skills are required beforehand)., • Advanced oral and written communication., • Advanced math skills to calculate tolerances and dimensions., • Must be able to read and understand Blueprints and G-Code., • Must be familiar with basic machining practices involved in turning, milling, drilling, threading operations., • Must be competent reading drawings and following instructions necessary to produce usable and saleable parts., • Must be proficient with the use of, the care of, and the calibration of all types of measuring devices (i.e., micrometers (OD and ID), dial calipers, dial indicators, etc.)., • Must possess and provide basic tools required for the execution of the position of machinist. Education: • OMEGA experience, • Proficient in running horizontal lathes, milling machines, VTL, and Bullard., • Capable of reading drawings and proper use of calibrated measuring tools., • Read drawings and use of micrometers., • Basic machining knowledge and practices required., • While performing the duties of this position, the employee will be required to stand and walk for significant portions of the shift., • Ability and willingness to lift objects weighing up to 50 lbs., walk, climb, reach, kneel, crawl, and balance. The position will be based full time in our Pearland Works Facility. Physical Requirements: • While performing the duties of this position, the employee will be required to stand and walk for significant portions of the shift., • Ability and willingness to lift objects weighing up to 50 lbs., walk, climb, reach, kneel, crawl, and balance. While performing the duties of this position, the employee will be regularly exposed to moving mechanical parts in a machine-shop environment. WHAT WE OFFER • Competitive Pay, • Paid Time Off, • Medical / Dental / Vision, • 401k, • Employee Incentive Programs ABOUT RMS Rotating Machinery Services (RMS Inc.) was established in 1998 with the vision to reinvent the concept of an aftermarket turbomachinery business. The goal was to provide turbomachinery operators with unparalleled service based on established relationships, solid engineering, and technical expertise—all backed by responsiveness in competitive prices and lead times. RMS’ commitment to quality penetrates every aspect of the organization and in the guiding force for all decision making. With an equal blend of cutting-edge technology, engineering experience, and the work of skilled crafts people, RMS continuously delivers the best possible results to customers. RMS is a nimble organization with a collaborative culture of individuals who come to work every day with a desire to improve upon their craft and further the rotating machinery industry. RMS Inc. provides equal employment opportunities to all employees and applicants for employment and prohibits discrimination and harassment of any type without regard to race, color, religion, age, sex, national origin, disability status, genetics, protected veteran status, sexual orientation, gender identity or expression, or any other characteristic protected by federal, state, or local laws.

Job DescriptionDescription: Are you ready to make a real impact? Looking for a stable, growing company where you can build your career and thrive? Your opportunity starts here. At Trace-A-Matic, our people are our greatest asset. We foster a clean, safe, and supportive work environment where individuals are empowered to grow personally and professionally. Our mission is to deliver excellence in complex precision-machined components while exceeding customer expectations. We believe in sharing success. Through our Gainsharing program, we split profits 50/50 with employees—paid out quarterly. And if you're relocating, we've got you covered with relocation assistance to help make your transition smooth. Trace-A-Matic Offers: • 10 Paid Holidays, • Serviced Base PTO, • Gainsharing, • Medical, Dental, Vision Insurance and more!, • On-site Fitness Center & Medical Clinic, • Weekly Pay, • Company Provided Uniforms and Safety Shoe Allowance, • Performance Merit Raises, • Climate Controlled Environment The Process Engineer will provide engineering support for all plant CNC operations, and communicating to the Manufacturing Engineer Manager the need for CNC programs as necessary. The following essential functions are the critical duties an employee must be able to perform either unaided or with the assistance of a reasonable accommodation. Define the operation process plan to : A. Determine best machine based on this criteria • Efficiency – Most cost effective ($$), • Availability – Delivery Requirements (Backlog), • Best place to establish part zero (X,Y,Z,W) as they apply, • What sequence each feature event should be machined in, • Do we have available fixture/jaws to hold this part, • Do we need to make a fixture or jaws specific to this part, • Can we modify an existing fixture or set of jaws to hold this part, • Are the required tools to machine each feature in house, • Do they utilize technology (thru the tool coolant, Specific coatings, chip breaker, ect), • Do we have to order any special tooling, • Find competitive solutions for custom tooling, • Submit all tooling quotes for review, • Do we have all the required inspection tools needed to check each feature, • Do we have to purchase any special items to inspect a feature, • Work with Manufacturing Engineer Manager to create a productive CNC program based on the tooling and sequence of feature machining we discussed above., • Negotiate starting feed/speed Parameters, • On complex machining operations work side by side with the set-up machinist as you proof out the CNC program, ensuring that it is running as intended., • Work with machinist to modify as needed (Speed and Feeds) to achieve highest efficiency while maintaining realistic tool life. 1.) Supporting high probability “project” quotes based on needed requirements. • Generate ideas for manufacturing methodologies., • Gather as much up front data as possible to optimize project start up., • Based on requirements from customer orders, plan sequences of operations for machining and assembly of products., • Ensure efficient and effective manufacturing methods are used that are compatible to available machines., • Specifies, design and/or procures special tooling or equipment required to attain product per customer requirement with in budgeted cost and time., • Programs CNC machines to effectively and efficiently produce desired product., • Analyze and resolve machining and tooling issues to avoid problems., • Create new or modify existing manufacturing drawings using CAD methodology., • Value engineer existing products and processes to reduce cost, lead time and cycle times., • Complies with all company policies/procedures., • Technical: through drawing and specification interpretation. (With the customer, in the office and on the shop floor.), • Communicating schedule-related items to appropriate people in operation, scheduling, planning/purchasing, supplier management and quality assurance roles, • Identifying needs for special action when standard action is not meeting project goals. Communicating those needs appropriately., • Facilitating resolution of manufacturing issues related to fixturing/tooling/programming where necessary, while understanding and respecting organizational lines of responsibility and communication., • Facilitating resolution of quality/inspection related issues by communicating with quality assurance staff and the customer on when required. Requirements: • Education: Requires an associate degree or equivalent job experience in CNC Machining/Programming., • Experience: 5 years Minimum, • Skills and competencies: The Process Engineer must have strong manufacturing skills, CADCAM skills, blueprint reading skills (including GD&T), and communication skills. Specific FeatureCam and Solidworks experience would be a plus.

Job Description We are looking for a CNC Programmer/ Operator to join our growing organization. The successful candidate must have a prior background in CNC Machining and must have an in-depth knowledge of blueprints, mechanical drawings and the English language. A successful candidate will be self-motivated and enjoy working with other people in a fast-paced environment. This is an exciting opportunity for someone who is interested in working in a growth industry and advancing quickly within our company. We need an experienced programmer/operator on day shift who can program a Siemens Controller on a 50”Fryer VTL. Candidate will need to have experience with rotating machinery and split parts/ bearings, set-up and programming from a print or model using GibbsCam preferably. Dayshift hours are 6:00 am – 3:30pm OT as required Job Type: Full-time

Job Description Metal Fabrication, CNC, Ordering, and Inventory Job Description This role involves the entire cycle of production for metal components, from material management to final fabrication and quality control, with a focus on Computer Numerical Control (CNC) operations. 1. Primary Duties: Metal Fabrication & CNC Operations These are the core technical responsibilities of the role. • CNC Machine Operation and Programming:, • Set up, operate, and program various CNC machines (e.g., mills, lathes, plasma cutters, press brakes) to produce parts to precise specifications., • Read and interpret engineering blueprints, technical drawings, and geometric dimensioning and tolerancing (GD&T) to determine machine set-up and operations., • Monitor machine operations to detect malfunctions and make necessary adjustments or reprogramming (often involving G-code editing)., • Fabrication & Assembly:, • Perform hands-on metal fabrication using tools and techniques such as cutting, bending, forming, grinding, and welding (MIG/TIG proficiency is often preferred)., • Assemble fabricated components into final products or sub-assemblies., • Operate other shop equipment like shears, saws, and punch presses., • Quality Control (QC):, • Conduct in-process and final inspections using precision measuring instruments (e.g., calipers, micrometers, height gauges) to ensure parts meet tight tolerances and quality standards., • Troubleshoot and resolve fabrication and machining errors. 2. Logistical Duties: Ordering & Inventory This section focuses on the supply chain and material management aspect of the job. • Inventory Management:, • Maintain accurate records of raw materials (e.g., steel, aluminum stock), components, and finished parts., • Conduct regular cycle counts and full physical inventory counts., • Organize and manage the storage of materials, optimizing layout for efficiency., • Ordering & Procurement:, • Monitor stock levels and determine material requirements based on production schedules and work orders., • Initiate purchase requests or place orders for raw materials, consumables (like welding wire, cutting fluids), and tooling to maintain adequate supply., • Coordinate with suppliers for delivery schedules., • Documentation:, • Complete and maintain production, quality, and inventory logs/documentation (often utilizing an ERP or production management system). 3. Additional Requirement: Plastics (A Plus) The mention of "plastics a plus" indicates that experience with non-metallic materials is valuable, suggesting diversification in production needs. • Plastics Fabrication/Machining:, • Experience working with different types of plastics, or rotational molding, potentially including machining, thermoforming, or knowledge of 3D printing/rapid prototyping. Category Key Skills Technical Proficiency in reading blueprints and schematics, CNC programming (G-code), machine setup and operation, welding techniques, precision measurement, and basic shop math. Logistical Inventory control, material ordering/procurement, data entry/record keeping, and familiarity with ERP/MRP systems. Soft Skills Attention to detail, problem-solving/troubleshooting, strong organizational skills, ability to work independently, and adherence to all safety protocols.

Job Description Job Purpose The CNC Operator shall operate CNC in accordance with plant policies and procedures. He/she will ensure a safe and compliant operation during his/her shift. Duties & Responsibilities Assist in performing setups. Operate CNC lathe in accordance to SeAH Steel USA, LLC operating instructions. Skillfully make necessary adjustment to CNC program or machine control offsets to assure compliance to all dimensions and quality requirements. Use precision gages, micrometers and other applicable measurement instruments to validate compliance of product. Operation of a jib crane to manipulate parts Interpret sketches in order to provide a quality finished product Read and understand the Operator Description Sheets (ODS) as well as the Preventative Maintenance for the machine and Risk Assessment that is posted on or near the machine center. Perform basic quality checks at the point of production using scales, micrometers, calipers and gages. Fill out paperwork for quality tracking. Ensure completion of daily Preventative Maintenance Program. Knowledge of and strict adherence to the lock out tag out program Maximize efficiency and productivity at all times. Responsible for quality of work meeting all requirements. Follow all Company work instructions, specifications and requirements. Follow all Company Rules, Procedures and Policies. Follow all Company Safety Rules. Other duties as assigned. Qualifications / Competencies Education: o High School Diploma or GED preferred but not required. Years of Experience: o Minimum of 2 years of experience as a CNC Operator is preferred but not required. Job Knowledge: o At least Knowledge and experience within the OCTG pipe inspection industry is preferable. o Must have a good understanding of machine shop operations and processes. o Ability to read, write and speak English is preferred. o Ability to read blueprints, micrometers and other precision measuring instruments is preferred but not required. o Ability to understand and execute instructions well. Personal Competencies: o Excellent verbal and written communication skills. Safety: o Understands all applicable location safety rules and regulations and makes sure that all are being followed. Physical Requirements & Working Conditions Working conditions are normal for a manufacturing environment. Loose fitting clothes and jewelry are not permitted on site. The ability to lift 25/50 pounds regularly. The ability to respond quickly to sounds. The ability to move safely over uneven terrain or in confined spaces. The ability to see and respond to dangerous situations. The ability to safely climb ladders while carrying 40 pounds. The ability to work in loud, hot environments/extreme weather while wearing required PPE. Ability to see 20-20 when corrected. Ability to identify and distinguish colors.

Job Description We’re seeking a Manual Grinding Operator to join a precision manufacturing team in Houston, TX (77003). The ideal candidate has hands-on experience with manual cylindrical grinding machines and takes pride in delivering top-quality, tight-tolerance work. What You’ll Do * Set up and operate manual OD and/or ID grinders (examples: Cincinnati, Landis, Norton, Okamoto, Toyoda). * Grind and finish cylindrical parts to exact customer specifications. * Use micrometers, gauges, and blueprints to ensure dimensional accuracy. * Report deviations and assist with process improvements. * Perform basic liquid penetrant inspections when required. * Operate jib and overhead cranes safely. * Conduct routine maintenance and keep your workstation organized. * Participate in ongoing training and demonstrate steady progress toward independent operation. What We’re Looking For * Strong background in manual grinding (not CNC-only). * Ability to read and interpret technical drawings and measurements. * Detail-oriented, safety-conscious, and dependable. * Experienced Operators: 1+ year of grinding or machining experience. * Trainees: High school diploma or GED; 4 weeks of paid, supervised training provided. * Must have (or be willing to acquire) personal hand tools – payroll deduction program available. Pay & Advancement Hourly Rate Based on Skill Level: LevelHourly RateExpert$37.00Spec+$35.00Specialist$33.00Tech+$31.00Tech$29.50A+$27.50A$26.00B+$24.00B$22.50C+$21.25C$20.00 Pay is determined by experience, hands-on skill, and performance evaluations. Training & Evaluation * Minimum four (4) weeks of on-the-job evaluation. * Continuous feedback and development with opportunities for pay increases based on skill demonstration. Felony-Friendly Employer**Note: This employer values rehabilitation and opportunity. Candidates with non-violent, non-theft felony convictions are encouraged to apply.

Job Description Bonus: Eligible for up to $5,0000 RELOCATION AND HIRING BONUS Job Title: CNC Machinist Specialist (Expert Level) Department: Machine Shop Reports To: Supervisor of Department FLSA: Non-Exempt Status: Full-Time Shift: 1st & 2nd shift (4x10 Schedule) (1st 5:00 am - 3:00 PM) (2nd 2:45 PM - 12:45 AM) Location: Pueblo, CO (Relocation Assistance Available) Remote: On-Site Pay Range: $30.00-$39.00 Hourly About Gulftech International Our companies are the world’s recognized leaders in the engineering, manufacturing, leasing, selling, and servicing of industrial equipment and components serving food production and processing companies. Gulftech’s family of companies touches 90% of the world’s fresh produce, nuts, and fish products across 85 countries worldwide. About Gulfco Manufacturing Gulfco is a family-owned manufacturing organization with best-in-class operations and a “small company” culture that produces parts, equipment, and industrial solutions for the global food processing and packaging industries. As a proud member of the Gulftech family of companies, we serve as the turnkey supplier to a diverse portfolio of multi-national contract manufacturers, each of which is the leader in their respective market throughout the world. Job Summary Are you a skilled CNC Machinist who thrives on challenging setups and tight tolerances? This role goes beyond button-pushing — we need someone confident in setting up, dialing in, and producing complex, one-off, and low-volume parts with high precision. Responsibilities Must be a subject matter expert in the following functions/activities (perform correctly and without assistance): Able to Run Manual and CNC Machines at an expert Level. • Perform full setups on CNC mills and/or lathes from print or model — including indicating vises, fixtures, and part zeros., • Interpret complex blueprints, GD&T, and 3D models to execute machining strategies., • Adjust feeds, speeds, tooling, and offsets to optimize quality and efficiency., • Troubleshoot issues related to tooling, setup, and part accuracy independently., • Ensure in-process inspection and first article inspection compliance., • Collaborate with engineers and programmers to refine setups and improve processes. What You Bring: • 5+ years of CNC machining experience, with a strong emphasis on complex setups and first-run parts., • Strong proficiency in reading and interpreting technical drawings, GD&T, and setup sheets., • Strong understanding of machine offsets, tool presetting, and basic G/M code., • Experience with multi-axis machining or live tooling., • Strong understanding of machining processes and techniques., • Proficient in reading and interpreting blueprints and technical drawings., • Familiar with the use of precision measuring instruments like micrometers and calipers., • Solid understanding of lean manufacturing Benefits and Compensation • Two medical plans (PPO & HSA), dental, and vision insurance, • Paid time off, Vacation, and eight Holidays, • Employee assistance program (EAP), • 401k, • Profit sharing, • Free Life, • Free AD&D, • Free Disability insurance (Shot and Long-Term Disability), • Tuition Assistance, • Company cell phone/cell phone stipend *Salary information is a general guideline only. Actual compensation considers factors such as (but not limited to) the scope and responsibilities of the position, location, work experience, education, and key skills. This policy applies to all terms and conditions of employment, including recruiting, hiring, placement, promotion, termination, layoff, recall, transfer, leaves of absence, compensation, and training. *Gulfco Manufacturing is dedicated to the principles of equal employment opportunity in any term, condition, or privilege of employment. We do not discriminate against applicants or employees on the basis of age, ancestry, race, sex (including pregnancy and sexual orientation/gender identity), color, religion, national origin, parental status, marital status, political affiliation, family medical history or genetic information, military or veteran status, disability, medical condition, or any other non-merit based factor or status protected by federal, state or local law

Job DescriptionJOB SUMMARY Rotating Machinery Services, Inc (RMS Inc.) is seeking a qualified CNC Machinist to work 2nd shift (3pm to 11pm) and perform a variety of machining practices involved in turning, milling, drilling, threading operations, etc. on rotating equipment components (pumps, turbines, compressors, and more) and assemblies to ensure compliance with specifications and quality requirements. JOB REQUIREMENTS AND QUALIFICATIONS • Ability and willingness to be in the shop environment a minimum of 8 hours per day, primarily standing and sitting., • Ability and willingness to work around and use large propane / acetylene., • Ability to operate small lifts, pallet jacks and other lifting equipment (training will be provided on our specific equipment, but basic skills are required beforehand)., • Advanced oral and written communication., • Advanced math skills to calculate tolerances and dimensions., • Must be able to read and understand Blueprints and G-Code., • Must be familiar with basic machining practices involved in turning, milling, drilling, threading operations., • Must be competent reading drawings and following instructions necessary to produce usable and saleable parts., • Must be proficient with the use of, the care of, and the calibration of all types of measuring devices (i.e., micrometers (OD and ID), dial calipers, dial indicators, etc.)., • Must possess and provide basic tools required for the execution of the position of machinist. Education: • OMEGA experience, • Proficient in running horizontal lathes, milling machines, VTL, and Bullard., • Capable of reading drawings and proper use of calibrated measuring tools., • Read drawings and use of micrometers., • Basic machining knowledge and practices required., • While performing the duties of this position, the employee will be required to stand and walk for significant portions of the shift., • Ability and willingness to lift objects weighing up to 50 lbs., walk, climb, reach, kneel, crawl, and balance. The position will be based full time in our Pearland Works facility (77047). Physical Requirements: • While performing the duties of this position, the employee will be required to stand and walk for significant portions of the shift., • Ability and willingness to lift objects weighing up to 50 lbs., walk, climb, reach, kneel, crawl, and balance. While performing the duties of this position, the employee will be regularly exposed to moving mechanical parts in a machine-shop environment. WHAT WE OFFER • Competitive Pay, • Paid Time Off, • Medical / Dental / Vision, • 401k, • Employee Incentive Programs, • Employee Reimbursement Programs, • Tool, Shoe, and Safety Glasses reimbursement ABOUT RMS Rotating Machinery Services (RMS Inc.) was established in 1998 with the vision to reinvent the concept of an aftermarket turbomachinery business. The goal was to provide turbomachinery operators with unparalleled service based on established relationships, solid engineering, and technical expertise—all backed by responsiveness in competitive prices and lead times. RMS’ commitment to quality penetrates every aspect of the organization and in the guiding force for all decision making. With an equal blend of cutting-edge technology, engineering experience, and the work of skilled crafts people, RMS continuously delivers the best possible results to customers. RMS is a nimble organization with a collaborative culture of individuals who come to work every day with a desire to improve upon their craft and further the rotating machinery industry. RMS Inc. provides equal employment opportunities to all employees and applicants for employment and prohibits discrimination and harassment of any type without regard to race, color, religion, age, sex, national origin, disability status, genetics, protected veteran status, sexual orientation, gender identity or expression, or any other characteristic protected by federal, state, or local laws.

Job Description About the Role: We are seeking a highly skilled CNC Lathe Machinist to join our team at RVO MANUFACTURING LLC. As a CNC Lathe Machinist, you will be responsible for setting up and operating CNC lathes to produce high-quality precision parts. Your attention to detail and ability to interpret technical drawings will be essential in ensuring that all parts meet the required specifications. You will work closely with our engineering team to troubleshoot any issues that arise during the production process, and you will be responsible for maintaining the machines to ensure optimal performance. Minimum Qualifications: • High school diploma or equivalent, • Experience with Mazak CNC lathe, • Experience with programming CNC lathes, • Set up and operate CNC lathes to produce precision parts according to technical drawings and specifications, • Perform quality checks on finished parts to ensure they meet required specifications, • Troubleshoot any issues that arise during the production process, • Maintain machines to ensure optimal performance, • Collaborate with engineering team to continuously improve production processes, • Responsible for Process Control related to the Machine assigned to by the Machine Shop Supervisor., • Responsible for the in-process inspection, handling, and inventory control of equipment flowing through the assigned machine., • Responsible for receiving material, engineering print, set-up, programming, and production of machine., • Responsible for hitting target efficiencies established by the Machine Shop Supervisor and Manufacturing Manager., • Responsible for assisting and training other employees when asked by Supervisor., • Promote a team environment within the department. Cooperate and assists all departments in resolving issues as related to jobs. As a CNC Lathe Machinist (Mazak Lathe), you will use your technical skills and attention to detail to produce high-quality precision parts, CNC Programming, set up Lathe. You will also use your problem-solving skills to troubleshoot any issues that arise during the production process. Your ability to work independently and as part of a team will be essential in ensuring that production goals are met. Additionally, your experience with programming will be beneficial in optimizing production processes. Finally, your knowledge of Lean Manufacturing principles will help us continuously improve our processes and increase efficiency. You have ability to read an engineering print, Set-Up and Program CNC Machine Tools, perform advanced mathematical computations, apply concepts such as fractions, percentages, ratios and proportions to practical situations, use proper measuring tools to perform quality inspections, move or transfer products with an overhead crane. You have Ability to lift 50 lbs. when required. While performing the duties of the job, the employee is regularly required to stand, walk and reach with hands and arms. Specific vision abilities required by this job include close vision, distance vision, colour vision, depth perception, and ability to adjust focus. Good communication skills to effectively communicate and understand job instructions both verbally and written. Ability to effectively interpret and translate instructions to other employees in a professional and respectful manner. Benefits: Dental insurance Health insurance, 401 k Paid time off Parental leave Vision insurance • Day Shift (Preferred) 10-12 hour shift Weekends as needed

Job DescriptionCNC MachinistTemp to Hire$24-$26/hr Monday through Friday, 5AM to 1:30PM, daily overtime possible and weekend work possible Duties: Operate CNC controlled metal-cutting and related processing machines and equipment. Machines and equipment included, but not limited to, turning lathes, vertical and horizontal mills, and saws for a wide range of differing materials Plan and perform setups, first article layouts, and execution of work according to product specifications, blueprints, drawings, and work instructions Inspect all materials, components, etc. to assure they meet the accepted quality standards Participate in Lean events with active involvement in Continuous Improvement initiatives Responsible for the safe operation of tools and machinery while performing daily tasks Responsible for the reporting of unsafe acts or conditions to supervision immediately as noticed Must immediately shut down production and report safety or quality concern(s) to a supervisor, engineer, manager, HSE or Quality representative Ensure accurate movement of inventory through their assigned area – transactions, production reporting, resolution of negatives, etc. Complete required inspection documentation, marking of heat numbers and hold tags Must employ Oracle to navigate and execute tasks to complete work orders, WIP transactions, material workbench, supply demand, and material requirements Perform daily maintenance check sheet Operate forklift and pallet jack as required for tasks Report unsafe acts or conditions to supervision immediately as noticed Minimum Qualifications: High school diploma or GED 1 year of related CNC machinist experience or 2-year degree in Machining Technology Qualified to operate some machining equipment alone, meets expectations for quality and productivity, can handle some setups and all documentation alone Must be able to understand M-Code and G-Code programming Effectively use email to communicate (potential) risks to safety, quality, delivery, and productivity Must be able to use personal computer and/or workstation Must meet quality and production standards Demonstrates good interpersonal, organizational, and problem-solving skills Experience using forklift and pallet jacks Must be able to use hand tools, power tools and measuring devices such as height gauges, calipers, micrometers, and thread gauges Understand and follow verbal and written instruction Must have a professional and positive attitude as well as a passion for continuous improvement Is open to change and new information Show respect, understanding, and concern for others Demonstrate a personable, positive, and enthusiastic attitude

Job DescriptionCNC Operator Temp-to-Hire Shift: 1st Shift — 5:00 AM to 1:30 PM Pay: $19/hrJob DescriptionThe CNC Set-Up and Edit Operator is responsible for operating, setting up, and editing CNC machines to produce high-quality parts. This role requires experience with Mazak Mills and Haas Mills, along with strong attention to detail and the ability to work independently. Job Responsibilities • Perform CNC operations and additional assigned tasks to produce quality parts that meet all print and specification requirements, • Interpret drawings, manuals, specifications, and sample parts to determine dimensions, tolerances, sequence of operations, and setup requirements, • Understand setup requirements and select tooling, speeds, and feeds for optimal tool life and program efficiency, • Follow detailed operating instructions, processes, and procedures, • Safely and correctly operate hand tools, power tools, forklifts, semi-automated material handling equipment, and overhead cranes, • Participate in training and continuing education as required, • Perform additional duties as assigned, • Work overtime when required Required Qualifications, • High School Diploma or GED, • Minimum 2 years of experience in setup, operation, and programming of CNC Mill machines, • Proficient with precision measuring instruments, including calipers, micrometers (ID/OD), depth gauges, indicators, and scales, • Ability to read and interpret engineering drawings, • Understanding of writing and editing CNC programs for milling and turning operations, • Strong knowledge of CNC machine setup, cutting tool selection, and application, • Solid understanding of G & M codes, • Blueprint reading skills and familiarity with GD&T, • Basic math skills required for CNC programming calculations, • Experience using hand tools and light power tools safely, • Ability to lift 50+ lbs (with assistance as needed) and work in bending, standing, or squatting positions for extended periods

Job Description WE ARE SEEKING a talented and versatile Mechanical Design Engineer with the experience and expertise to design complex electro-mechanical systems. You’ll work closely with cross-disciplinary teams—software, electrical, and mechanical—to develop prototypes and production-ready designs. This role is ideal for someone who enjoys hands-on engineering, rapid iteration, and working on diverse projects. At Sparx Engineering, we develop cutting-edge technologies for a wide range of industries including medical devices, industrial automation, oil & gas, consumer products, and aerospace. We’re a small, agile team of engineers and developers who thrive on solving complex problems and pushing the boundaries of innovation. Our collaborative and casual work environment fosters creativity, continuous learning, and technical excellence. KEY RESPONSIBILITIES • Develop detailed mechanical designs using SOLIDWORKS, • Design components for 3D printing, CNC machining, and injection molding, • Create integrated electro-mechanical assemblies, • Produce and review manufacturing and assembly documentation, • Assist with fabrication using 3D printing, CNC machining, and vacuum forming, • Safely operate hand and power tools for metal and woodwork, • Build and test prototypes of complex systems, • Troubleshoot and resolve design issues, • Participate in design reviews and provide constructive feedback This position requires a Bachelor's or Master's degree in Mechanical Engineering or Aerospace Engineering (or a closely related field). Experience in the following areas is also preferred: • BS or MS in Mechanical or Aerospace Engineering (or related field), • Minimum of 3 years of professional, post-graduate experience in mechanical design or related engineering roles, • Proficiency in SOLIDWORKS and technical drawing (including GD&T), • Familiarity with CFD and FEA tools, • Knowledge of standards such as ANSI, UL (HazLoc), FDA, and MIL-SPEC, • Strong problem-solving and communication skills, • Experience working with suppliers and fabricators, • Hands-on experience with 3D printing and CNC machining, • Basic understanding of electronics and troubleshooting, • Strong mathematical skills, • Comprehensive Health Care Plan (Medical, Dental & Vision), • Retirement Plan (401k with matching), • Life Insurance (Basic, Voluntary & AD&D), • Paid Time Off (Vacation, Sick Leave, Holidays), • Short Term & Long Term Disability, • Training & Professional Development Opportunieis, • Free Snacks & Beverages, • Access to Wellness Resources

Job Description Overview Tradesmen International is immediately hiring skilled Laser / Punch Press Operators for projects located in and around New Berlin, WI. This is a first shift opportunity with a pay rate of up to $25/hour based on experience & skill level plus $100/per diem for travelers of 60+ miles from the job site. If you are a Laser / Punch Press Operator and want to work alongside other proven craftsmen who emphasize safety, productivity and superior craftsmanship, this is your chance to advance your career! Job Scope: • Operate Amada CNC Turret punch press, • Use precision measuring tools & confirm parts are in spec, • Keep up with established production rates, • Work multiple machines, • Work on set ups, • Must have Experience Operating CNC Laser/Punch Machines, • Proper PPE Qualifications Tradesmen International not only offers consistent work, top pay, and employment opportunities, we also provide a benefits package that is among the best in the industry. Our comprehensive benefits include: • Tradesmen+ Rewards Program – earn points for hours worked, • Vacation Pay, • Health insurance Tradesmen International is an EO employer - M/F/Veteran/Disability Click here to visit Tradesmen’s full website.