Trabajos computer operator en Linden, New JerseyCrear alertas

Job DescriptionCompany Description Headquartered in Cordova, TN, Stratas Foods is a 50/50 joint venture formed in October 2008 between ACH Food Companies and Archer Daniels Midland Company. Stratas Foods is built on the combined strengths and expertise of these two great parent companies, laid down over the course of over 200 years of combined experience. Stratas will continue to build on this foundation of excellence by providing value added, branded and custom formulated fats and oils solutions to the Food Service, Food Ingredient and Retail sectors. At Stratas Foods we are committed to being the most valued supplier of fats, oils, dressings, mayonnaise and salad dressings to the private label retail bottled oils market in the United States. Manufacturing facilities are located in Dallas and Houston, TX; Decatur and Quincy, IL; Englewood, NJ; Hillside, NJ; Fresno, CA; Nashville, TN; and Valdosta, GA. Corporate offices are located in Memphis, TN. We are committed to maintaining a progressive workplace by utilizing the ideas, skills and talents of all of our employees. We strive to make Stratas Foods a great place to work and are building a team capable of meeting our business goals. Job Description Responsible for supporting the plant's food safety culture and complying with all food safety, quality, and regulatory requirements applicable to the position. Installs, maintains, troubleshoots, temperature/ pressure and flow devices for both field indicators and sending devices to PLC’s. Ability to modify PLC logic for process changes and improvements. Ability to read, understand, and create corrective action work orders when required. Utilize, respond, and document all scheduled and unscheduled work orders in the DirectLine CMMS system. Installs, maintains, and troubleshoots electrical distribution and protection circuits up to 480VAC. Executes work in a safe and expedient manner according to priorities. Performs emergency corrective maintenance daily and call-ins. Execution of capital and maintenance projects. Audit preventive/ predictive maintenance. Routine corrective maintenance. Provides practical solutions to operations problems. Inspecting & testing elements of electrical systems to locate and diagnose faults. Performing required repairs through replacement of inoperative parts or re-wiring of circuits in accordance with industry codes. If certified, safely operates, monitors, and performs basic troubleshooting of high-pressure black seal boiler system in accordance with applicable regulations. Scopes, estimates and executes small capital / maintenance projects along with maintenance manager/ project director/ operations, etc. Responsible for analyzing test results for irregularities and documenting irregularities in maintenance log. Trains other employees considering their needs and company needs. Reduces the likelihood of an interruption of electrical power to critical operations by monitoring and repairing regulated power supplies to computer systems and equipment requiring constant voltage with minimal fluctuation. Oversee the work by contractors as required on site to ensure safe and quality performance. Promotes preventative maintenance as a strategy in maintaining electronic test equipment and mechanical tools by keeping accurate records. Looks for opportunities to help work get done safer, faster, and more cost effective. Performing routine preventative maintenance and repairs to manufacturing equipment as needed. Work Hours 1:30PM - 10PM - Mon - Fri Qualifications Minimum of 5 years’ electrical experience in a manufacturing environment. Possession of a high-pressure black seal boiler operator license is preferred. Technical education in trade, project planning, and management. Ability to interpret wiring diagrams, blueprints, and electrical schematics. Knowledge of effective troubleshooting skills in mechanical, pneumatic, hydraulic, and electrical systems. Proficient in reading schematics and using basic electrical measuring devices. Strong problem solving and math skills. 2 – 3 years of related experience in oil, chemical, pharmaceutical, food, or process manufacturing facility. Computer literacy is required. High school diploma or General Education Degree (GED). Additional Information Physical: Must be able to walk throughout the plant, to include walking and climbing up/downstairs and ladders (portable, fixed). Must have be ability to lift up to 50 pounds occasionally is required. Sensory: Must have the appropriate level of sensory acuity (visual, hearing, speaking, smell and touch) to be able to identify and react to normal, abnormal and alarm conditions (chemicals, temperature, etc.) Mental/Reasoning: Must be able to logically and methodically work through and break down complex problems and processes to enable effective communication with all levels of the organization. Benefits: Medical, Dental, Vision Stratas Foods is an equal opportunity employer and will not discriminate against any applicant or employee in any manner prohibited by law, including but not limited to, on the basis of race or color, religion, gender, age, genetic information, national origin/ancestry, mental or physical disability, family status/marital status, military/veteran status, and any other legally protected status. Pay Transparency Nondiscrimination Provision-The Employer will not discharge or in any other manner discriminate against employees or applicants because they have inquired about, discussed, or disclosed their own pay or the pay of another employee or applicant. However, employees who have access to the compensation information of other employees or applicants as a part of their essential job functions cannot disclose the pay of other employees or applicants to individuals who do not otherwise have access to compensation information, unless the disclosure is (a) in response to a formal complaint or charge, (b) in furtherance of an investigation, proceeding, hearing, or action, including an investigation conducted by the employer, or (c) consistent with the Employer’s legal duty to furnish information. 41 CFR 60-1.35(c) Stratas Foods Applicant Request for Accommodation Form: https://www.stratasfoods.com/compliance Stratas Foods California Privacy Rights Act Policy: https://www.stratasfoods.com/compliance

Job Description Company Overview LD power automation is a leading engineering company specializing in marine and industrial electrical and control services and products. With extensive experience in installation, commissioning, and troubleshooting, we deliver professional and timely solutions that help our clients achieve operational excellence. Our commitment to building strong, long-term relationships is founded on trust and a deep understanding of our clients' needs. For more information, visit our website. Job Summary We’re looking for a hands-on Field Service Engineer who’s ready to dive into the world of marine and industrial power systems. If you enjoy solving real-world problems, working with your hands, and being the go-to expert when things need fixing or fine-tuning, this might be the role for you. You’ll be installing, troubleshooting, and maintaining everything from motors and switchgear to PLCs and control systems aboard large ocean-going vessels while they’re in port. It’s a mix of tech, teamwork, and travel, with plenty of variety and challenges to keep things interesting. You’ll work closely with customers, vendors, and manufacturers to make sure systems run smoothly and safely. If you’re someone who takes pride in doing things right and enjoys working in dynamic environments, we’d love to hear from you. Key Responsibilities • Communication between cooperating parties and assist to ensure smooth operation of electrical and mechanical equipment., • Performing maintenance including field installation, validation, and testing of electronic, electric and mechanic components., • Troubleshooting by observing mechanical devices in operation, listening for problems and using electrical meters, calibration equipment, mobile and handheld computer systems, hand tools, PLC, operator interface, data collection, and safety-related control systems., • Remove and replace defective parts by properly dismantling devices using hoists, cranes, and hand and power tools, examining form and texture of parts., • Maintain a safe and clean working environment by complying with company procedures, rules, and regulations. Qualifications • Electrical Engineering Bachelor’s degree or a combination of a relevant certificates, Associate or Technical degree and 4-5 years of relevant work experience., • Must possess sufficient manual dexterity to operate tools, machinery and repair equipment and lift at least 40 pounds unassisted., • Ability to walk, stoop, kneel, crouch, crawl, and climb up/down ladders and stairs, including on uneven, moving, or slippery surfaces., • Self‑motivated and capable of working independently and as part of a team., • Ability to remain focused, composed, and effective in high‑pressure or stressful situations., • Demonstrates a strong sense of responsibility and ownership, consistently taking proactive action in tasks, assignments, and unexpected situations., • Ability to obtain a TWIC card (Transportation Worker Identification Credential). Skills & Competencies • Knowledge of low voltage and line voltage AC and DC systems and relays, high voltage experience including terminations a plus., • Basic hydraulic and machine repair knowledge a plus., • Excellent written and verbal communication skills Electrical/Mechanical aptitude, advanced skills in one or more of the following areas a plus: software, electronics, low and high voltage electrical, mechanical and propulsion systems, automation, PLC programming, Ethernet network/Serial communication., • Ability to read Schematics., • Ability to write reports, effectively present information and respond to questions from groups of managers, clients, and customers., • Proficiency in installation, troubleshooting, and commissioning., • Ability to collaborate with clients and ensure timely service delivery., • Must be an avid user of computer software including Microsoft Office. Working Conditions • Working conditions are marine/industrial environments which require the use of company uniform and safety equipment, to include but not limited to safety glasses, hearing protection, steel toe work boots, hardhat and safety vests., • Comfortable working aboard vessels, in confined spaces, and in challenging environmental conditions including rain, ice, snow, wind, heat, and other weather extremes., • Available to work flexible, on-call hours, including varying and unpredictable shift schedules., • Regular local travel with occasional international trips as required. Other • Must be able to pass a drug screening and background check upon request for customer site access. A clean driving record is required., • As our business and operations evolves to meet changing market needs, team members are expected to adapt seamlessly and undertake additional essential projects and tasks when required. Compensation & Benefits LD power automation provides competitive compensation and benefits to acknowledge employees’ contributions. Base pay is determined by job-related knowledge, skills, experience, location, and internal equity considerations: • 401(k)/Employer Matching, • Health, Dental, and Vision Insurance, • Paid Time Off

Job Description General Description: Contact point for all shift team members with effective communication skills. Ability, to motivate, be proactive and ensure smooth operations with collaboration in effort to meet the department goals and objectives. Think logically and display technical aptitude to solve problems with creativity, diligence, and achievement. Produce machined parts by programming, setting up and operating a computer numerical control (CNC) machine. Maintaining equipment, adhering to quality and safety standards, saving, and updating parts programing, are some of the core responsibilities of a CNC operator. Reports to: Department Manager Responsibilities: • Programming, program selection, & program editing on CNC multi-axis turning centers., • Interpret engineering drawings to manufacture parts using CNC machinery, • Ability to make correct tool selection for parts manufacture, • Demonstrate ability to process work orders independently or with minimal instructions., • Perform preventative maintenance on machinery and equipment, • Identify quality, process, machinery, or equipment defects, • Delegate Operator tasks, set clear team performance expectations., • Oversee day-to-day shift operation, promoting a Safe work environment., • Improve the quality output of parts and work hands on with the quality department, • Implement continual training for teammates., • Troubleshoot equipment when there is a problem., • Other duties as assigned Minimum Educational Qualifications (If Applicable): • Not required. Minimum Previous Experience: • 7+ years working in a manufacturing environment/machine shop, • Proficiency with heavy machinery including lathe, drill press, grinding wheel, chop saw, and mill., • Ability to sequence or edit programs on lathe and CNC., • Read measuring tape, gauges, and calipers, • Must be able to lift and move up to 40 lbs. Minimum Additional Training (If Applicable): • Company’s Quality Management System., • ISO 9001:2015 awareness., • Other Skills:, • Hand-eye coordination., • Attention to detail.

Job Description Fabuwood is seeking a hands-on and results-driven CNC Night Shift Supervisor to lead our CNC production team. This position is responsible for safely executing the nightly production plan, maintaining product quality, minimizing equipment downtime, developing employees, and ensuring a clear handoff to the next shift. The ideal candidate is a visible and engaged floor leader who understands what each machine and operator is working on throughout the shift. This individual will respond quickly to safety, quality, material, staffing, and equipment issues while taking full ownership of the shift’s overall performance. Schedule: Monday–Thursday, 5:00 PM–3:00 AM Key Responsibilities Production Leadership • Prepare the CNC team and equipment before the start of production., • Conduct a focused pre-shift stand-up meeting to communicate safety expectations, production priorities, staffing assignments, and potential concerns., • Assign operators to machines based on production needs, employee skills, and workload., • Monitor production progress throughout the night and ensure established goals are achieved., • Maintain awareness of what each machine and operator is working on., • Follow the CNC Night Shift Leader Standard Work during every shift., • Complete an accurate and detailed handoff to the incoming shift. Safety and Quality • Promote and enforce all company safety policies and operating procedures., • Respond immediately to safety concerns and ensure corrective actions are taken., • Monitor product quality and address defects or process inconsistencies promptly., • Ensure operators follow approved work instructions, quality standards, and machine procedures., • Maintain a clean, organized, and safe production environment. Equipment and Downtime Management • Monitor CNC machine performance and respond quickly to equipment issues., • Coordinate with Maintenance when repairs or technical assistance are required., • Track machine downtime and support efforts to restore production safely and efficiently., • Identify recurring equipment or process issues and escalate them to the appropriate department., • Ensure required machine inspections and startup checks are completed. Team Development • Provide clear direction, coaching, and performance feedback to CNC operators., • Train employees on safe machine operation, quality expectations, and production procedures., • Address attendance, performance, and workplace concerns in a timely and professional manner., • Encourage accountability, teamwork, and continuous improvement., • Identify employee development and cross-training opportunities. Qualifications • Previous supervisory or team leadership experience in a manufacturing environment., • CNC machining, woodworking, cabinetry, or related production experience strongly preferred., • Strong understanding of production workflow, machine operation, quality control, and workplace safety., • Ability to troubleshoot production issues and make effective decisions in a fast-paced environment., • Strong leadership, organization, communication, and problem-solving skills., • Ability to remain actively engaged on the production floor throughout the shift., • Basic computer skills and experience completing production reports., • Bilingual English and Spanish preferred. Benefits • 401(k), • 401(k) matching, • Dental insurance, • Flexible spending account, • Health insurance, • Life insurance, • Paid time off, • Retirement plan, • Vision insurance

Job Description Summary Incumbent is responsible for the safe, orderly and expeditious flow of air traffic through Metering Control of departure traffic on the Non-movement areas of the Newark Liberty International Airport (EWR). Dimensions of Position A Ground Management Program (GMP) operator shall support the system in a tactical and pre-tactical nature, shall work on site at EWR and shall be the primary System Operator during all times that the system is in operation. A GMP Operator shall have a thorough working knowledge of Air Traffic Management in the New York Region, in particular, the impact of fix and route availability in relation to the health of the surface operation at EWR. Incumbent works under the general supervision of the Ground Management Program Manager who relies on the incumbent to perform established duties independently. On new or revised procedures, the manager gives detailed instructions, observes, and checks work during or immediately after completion according to complexity of the task or until satisfied the incumbent is able to perform the procedure independently. Accountability • Makes decisions and recommendations involving:, • The sequence and separation of gate traffic ready for pushback and engine start., • Plans the sequence of arriving traffic, using provided electronic aids, i.e. Aerobahn, prior to arrival at the airport., • The merging of arriving and pushback traffic that will assure all aircraft equitable treatment and provide for minimum delays., • Determines the usability of and resolves problems with:, • Communications equipment, • Aerobahn Technology, • Gate Management computer programs, • EWR GMP is not a positive control facility. Incumbent will be required to communicate recommended actions to airline, airport, and FAA employees to aid them in coordinating with each other to determine when to instruct aircraft to taxi, who to follow, taxi route, intermediate hold points, route clearance limit, and frequency transfer points., • Incumbent will initiate, and respond to, necessary coordination with EWR ATCT Ground Control concerning the movements of inbound and outbound aircraft., • Execute procedures required of the local Surface Movement Guidance and Control System Plan (SMGCS) during periods of reduced visibility, execution of the local Ice Threat Management Plan during periods of aircraft anti-icing, and the local Gate Hold program when initiated by the FAA EWR ATCT., • Provide airlines with, when required, field conditions, altimeter settings, weather conditions, operating status of navigational aids and NOTAMS., • Performs lower grade level duties as necessary to meet operational requirements and for proficiency maintenance., • Provides OJT training to others. Requirements Individuals with previous experience at one of the New York Airports are preferred. A qualified individual must have at least 2 years experience as a fully qualified, active ATC, pilot or airline dispatcher. Have the ability to deal with customers in a courteous, enthusiastic and professional manner; ability to effectively use interpersonal skills in order to resolve problems and customer complaints. Position is subject to drug and/or alcohol testing per RVA's non-DOT policy (pre-employment, random, reasonable cause/suspicion, post-accident). Applicants must be able to successfully pass a ten-year background check.

Job Description Company Description Ayr Wellness is a leading U.S. multi-state cannabis operator with more than 90 licensed retail locations across Florida, Massachusetts, Pennsylvania, Ohio, New Jersey, Nevada, and soon, Virginia. We cultivate, manufacture, and sell a broad portfolio of high-quality cannabis products, proudly serving both medical patients and adult-use consumers across our markets. At Ayr, our strength lies in our people. We’re re-imagining how we work across every part of our business, and we’re looking for builders and doers to roll up their sleeves and help shape what’s next. The cannabis industry is fast-moving, complex, and full of opportunity. Together, we’re not only shaping a company, but also building the future of cannabis. At Ayr you’ll have the opportunity to make a lasting impact while growing your career alongside a company positioning itself for long-term success. For more information, please visit www.ayrwellness.com. Job Summary AYR Wellness’ Sales Supervisor is accountable for managing the dispensary’s sales floor in cooperation with the Assistant Manager and Lead Budtender(s); this includes opening/ closing the store, managing breaks, controlling the flow of patients, being responsive to questions/concerns of patients, assisting budtenders with any questions/concerns while engaging patients and ensuring all cash controls are being executed consistently. When managing the business, the Sales Lead Supervisor must be specifically focused on patient care/ customer service, employee engagement and driving profitability via a positive patient experience. The Sales Lead Supervisor is expected to achieve said goals through educating their teams, inspiring operational efficiency, and delivering effective coaching. The Sales Lead Supervisor reports to the Dispensary Store Manager Duties and Responsibilities Executes: • Maintaining all aspects of dispensary operations in strict compliance with Department of Health, municipal and state legal regulations, • All Opening/ Closing Procedures (including all cash accounting procedures and reporting for end of day), • Cash handling standard operating procedures including register checks to ensure there are no variances between cash actual and POS software, • Ensure dispensary operations are prepared for service and patients, • Overseeing the salesfloor to ensure a positive patient experience, • Identify and address employee issues on a timely basis. Document appropriately in the Accountability Log. Make Dispensary Store Manager aware of any concerns regarding the performance management of employees Informs & Educates: • Team by executing Product Knowledge Training to ensure the team is well-educated on the PA Medical Marijuana program, fundamentals of cannabis as well as our entire menu of products, • Onboard and train new hires in accordance with company standards Routines Daily: • Opening and closing the dispensary o See Opening/Closing Procedures Guides, • Host one minute-meetings/ team huddles to inform team about promos/ new products, updates to ops and announcements, • Ensure the cleaning checklist is being consistently completed and all COVID-19 protocols are being met • Managing the salesfloor, ensuring a positive patient experience, • Managing Online Orders/ Curbside Reservations in an organized and timely manner, • Sales floor observations, giving coaching/ feedback to budtenders on how they communicate & engage with patients as well as on how they recommend products, • Maintaining store presentation in terms of visual assets and cleanliness, • Address and Resolve Patients’ Concerns, • Take pride in the appearance of the store by ensuring all areas, including restrooms, are consistently clean, safe, and guest-ready Weekly: • Conduct Tech sweep to ensure all technology is working properly and contact IT if repairs are needed, • Ensure that the visitor log is being fully filled out on a consistent basis with all necessary verifications provided Qualifications • Must stay current and adhere to all policies and regulations of the state cannabis agency., • Must meet age requirement as outlined by state cannabis agency., • Able to pass all background checks as required by state cannabis agency., • Able to accommodate scheduling that may include varied shifts, weekends, and holidays., • Maintain regular and punctual attendance. Education High school diploma/GED required Experience • 1-3 years, • Prior customer service experience in a hospitality, pharmacy, customer services or retail environment. Competencies (Knowledge, Skills, and Attitude) Customer Obsessed: Dedicated to creating a remarkable experience for both internal and external customers; builds rapport and maintains meaningful and effective relationships creating trustful, authentic connections; viewed as a good listener and is easy to approach and talk to and is often in the know early in any given situation. Relationship Building: Viewed as a truthful individual who shares authentic and constructive feedback in a respectful manner in the spirit of being a force for good; builds mutual respect and trust by listening, learning, and acting with compassion to encourage others in discovering their genius; takes responsibility for mistakes and offers impactful solutions; recognizes personal strengths and weaknesses; seeks and openly welcomes feedback for continuous improvement and personal growth. Results Oriented: Empowered with the knowledge of their potential this person learns quickly when facing new problems; a relentless and versatile learner, open to change, analyzes successes and failures for continuous improvement, experiments and will try anything to find solutions that support an ecosystem of knowledge; enjoys challenge of unfamiliar tasks, quickly grasps the essence and underlying structure of anything. Functional/Technical Skill: Possesses functional and technical knowledge and skills to perform at a high level of accomplishment; understands how their job function supports being a force for good Direct reports No direct reports, but leads project teams Working conditions • Work is primarily performed in a dispensary setting. The working area may be odorous at times and loud due to fans and filtration systems, fluctuating between cold and warm temperatures., • Involves frequent contact with staff, vendors, and customers. Work may include dealing with law enforcement and occasional State inspectors. Physical requirements • The person in this position frequently communicates with customers and/or caregivers regarding medical conditions and symptoms. Must be able to exchange accurate information about product offerings., • Frequently operates computer/POS system and other standard office equipment such as printers, phones and photocopy machines., • The person in this position must be able to remain in a stationary position when checking in customers or when operating the register., • Constantly moves and transports dispensary products/totes up to 30 lbs. throughout the dispensary., • Ability to twist, turn, bend, stand and walk as required to perform the duties associated with functioning as a dispensary agent. Nothing in this job description restricts management’s right to assign or reassign duties and responsibilities to this job at any time. AYR Wellness is an equal opportunity employer. We are committed to building a team that represents a variety of backgrounds, perspectives, and skills. We do not discriminate on the basis of race, color, religion, creed, national origin, ancestry, sex (including pregnancy, childbirth, or related medical conditions), sexual orientation, gender identity or expression, age, disability, genetic information, marital status, military or veteran status, or any other protected status in accordance with applicable federal, state, and local laws.

Job Description NEXPERA leads the way in sulfuric acid and potassium hydroxide regeneration, offering a comprehensive range of products and services that optimize processes, minimize environmental impact, and allow our partners to focus on their core operations. With the industry’s largest facility network, we ensure unmatched reliability and drive innovation across the industrial landscape. In addition, we provide an unmatched array of sulfur-based chemicals and related services to a diverse set of industries. BENEFITS Nexpera's comprehensive benefits package includes paid time off policies, as well as health, dental and vision insurance. In addition, employees are also entitled to participate in an employer sponsored 401(k) plan, to save for retirement. Pay and benefits for employees represented by a union are outlined in their collective bargaining agreement. POSITION PURPOSE The Chemical Operator will monitor and operate equipment and facilities, including field equipment, ensuring quality and conformance with standard operating procedures. Additional responsibilities include always maintaining safety standards and initiating and following emergency procedures when necessary. The Operator will perform basic maintenance repair and upkeep on area equipment. Job tasks are performed in control room, lab areas, and throughout various operation areas of the site. The site operates a process safety management-covered process that produces sulfuric acid in multiple concentrations. Product is shipped in rail cars, tank trucks and portable totes. PRIMARY DUTIES / RESPONSIBILITIES (but not limited to): • Start up and shut down (normal and emergency) plant systems and components., • Operate, monitor and control plant systems; visually inspect, monitor equipment and process conditions., • Prepares equipment for maintenance work by isolating, clearing and locking out., • Reviews, follows and, if qualified, revises detailed process operating procedures, maintenance procedures and safety procedures., • Troubleshoots equipment to restore to normal operation., • Analyzes charts and logs to identify potential or actual problems., • Identifies system problems to stabilize plant to normal conditions., • Trains new operators in the area, reinforcing safety and environmental principles., • Performs loading and unloading of railcars, tank trucks and totes., • Perform laboratory analysis of products., • Clerical duties as required., • Shipping duties as required., • Operate mobile equipment including manlifts, fork trucks, yard-dog and trackmobile., • Participate/Lead various site teams., • Recognize abnormalities in a High Hazard work area and promptly initiate action to secure the safety of all personnel along with protection of the environment and local community. Qualifications In order to be qualified for this role, the following is required: • High School Diploma/GED equivalent, • Minimum of 2 years’ experience in an industrial or manufacturing environment, • Ability to navigate the tools of Microsoft Office Suite (Outlook, Word, Excel, etc.) and Google Suite (Sheets, Docs, etc.) and learn new computer systems and software applications, • Willing and able to work 12-hour rotating shifts, including overtime, nights, weekends, holidays and short notice call-in if required, • Willing and able to lift up to 50 lbs, • Willing and able to work in a High Hazard environment; outdoors, indoors, elevated heights and confined spaces, • Willing and able to wear required PPE (personal protective equipment) such as steel toe shoes, hardhat, protective eyewear, face shields, respirator, chemical acid suit, etc., • Willing and able to climb stairs, ladders; stand, walk, stoop, bend, kneel, crawl; visual acuity for close work; able to reach overhead; able to hear and respond to alarms, • Willing and able to acquire a boiler’s license, • Current and valid driver’s license – willing and able to obtain powered industrial truck (i.e., fork trucks and manlifts) certification, • Willing and able to operate a trackmobile to move railcars on-site and a yard-dog to move product trailers as needed on the site., • Experience maintaining, repairing and troubleshooting industrial equipment/machinery The following skill sets are preferred by the site: • High Hazard/Chemical operations experience, • Experience reading and interpreting Schematics, Pipe & Instrumentation Diagrams, Procedures, Manufactures’ Literature, Safety Requirements, General Instructions; ability to learn and detect process deviations, • Experience operating fork trucks, • Experience with SAP or equivalent Manufacturing Operations software Successful candidates must be able to perform the essential functions of the job with or without accommodation. Additional information We are an Equal Opportunity Employer! All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability or protected veteran status.

Currently seeking a detail-oriented and efficient Data Entry Operator to join our team.As a Data Entry Operator, you will be responsible for accurately inputting and managing data into our computer systems and databases.Your role will involve working with various types of information, such as custom

QE Solar is one of the nation's largest independent solar and BESS operations and maintenance providers, with over 15 years of operating experience. We manage 10 GW of solar and 7.5 GWh of BESS across 44 states, supporting asset owners with multi-hundred MW utility solar projects and large standalone BESS systems. We're pure-play O&M. That focus means our entire organization is built around one thing: keeping solar and storage assets running well. Our technicians carry broad OEM certifications, and our in-house capabilities span MV/HV electrical, vegetation management, engineering, and capital improvements, to streamline asset management for project owners. QE Solar is seeking a Prevailing Wage Manager to own and lead the company's prevailing wage and pay compliance program across all operations. This role functions as the enterprise program owner for prevailing wage compliance, including strategy, execution, audit readiness, and cross-functional alignment. This individual will be responsible for ensuring full compliance with Davis-Bacon and IRA prevailing wage requirements across: • Direct Generation (construction, repowering, EPC-adjacent work), • Utility Operations (repair vs. maintenance classification), • Medium Voltage Services (skilled electrical work), • Sub-Contractors This role is critical to protecting tax credit eligibility, minimizing financial risk, and enabling scalable multi-state operations. 1. Program Ownership & Strategy Own and lead QE Solar's prevailing wage compliance program end-to-end Interpret and apply Davis-Bacon Act and IRA labor requirements Establish company-wide standards for wage determinations, labor classifications, and covered vs. non-covered work Build scalable frameworks for multi-state operations 1. Process & Systems Development Build and implement SOPs for wage determination selection, payroll validation workflows, and documentation standards Recommend and collaborate with stakeholders on system design and improvements (QEST, Rippling, Tradeseal, or other PW vendors) 1. Certified Payroll Oversight (Hands-On) Working with the Payroll and Benefits Manager, own the review of certified payroll for internal employees and subcontractors Validate wage rates and fringe benefits, worker classifications, and hours vs. scope alignment Resolve discrepancies and enforce corrective actions 1. Subcontractor Compliance & Alignment Design and enforce subcontractor compliance requirements including contract language, payroll submission standards, and documentation expectations Partner with Procurement and Operations to ensure full alignment and enforcement Monitor subcontractor compliance performance across projects 1. Audit, Risk & Compliance Reporting Lead internal and external prevailing wage audits Maintain audit-ready documentation aligned with IRS and DOL requirements Develop and deliver compliance dashboards and risk reporting to leadership Act as primary point of contact for IRS inquiries and Department of Labor audits 1. Cross-Functional Leadership Lead cross-functional initiatives across Business Development, Operations, HR, Finance, Legal/Compliance, and Procurement Support externally-facing client relationships as needed Serve as the subject matter expert for all prevailing wage matters Drive alignment between field execution and regulatory requirements 1. Training & Enablement Develop and deliver training for Project Managers, field leadership, and HR and payroll teams Provide ongoing guidance on worker classification decisions and scope interpretation (repair vs. maintenance) Required 58+ years of direct Davis-Bacon / IRA prevailing wage experience Proven experience owning prevailing wage compliance programs, not just supporting them Deep knowledge of certified payroll requirements, multi-state wage determinations, and subcontractor compliance enforcement Experience leading audits and compliance reporting Solar, renewable energy, or infrastructure experience Experience supporting IRA-related and Davis-Bacon projects Preferred Experience with Tradeseal and/or Rippling Familiarity with tools such as LCPtracker, eMars, or similar ERP/payroll systems Regulatory expertise (Davis-Bacon and IRA authority level) Program ownership mindset (builder and operator) Strong judgment in ambiguous compliance scenarios Cross-functional leadership without direct authority Audit rigor and documentation discipline QE Solar is committed to providing equal employment opportunities and reasonable accommodations in accordance with the Americans with Disabilities Act (ADA) and applicable state and local laws. The physical and mental demands described below are representative of those required to successfully perform the essential functions of this position. Reasonable accommodations may be made to enable qualified individuals with disabilities to perform these essential functions. This position is performed in an in-office environment at our designated Arizona location and requires: • Prolonged periods of sitting and working at a computer workstation, • Frequent use of hands and fingers to operate a computer, keyboard, and standard office equipment, • Ability to view multiple monitors and analyze data for extended periods, • Effective verbal and written communication skills, including participation in meetings and technical discussions, • Occasionally standing, walking, and moving throughout the office or facility, • Ability to lift and carry up to 15 pounds, as needed QE Solar offers incredible benefits! We enjoy: • 100% paid employee premium on health benefits; additional dependents at low costs and great plans for Health, Dental, Vision, FSA or HSA, • Wellbeing and Employee Assistance, • Learning & Development Opportunities, • Discounted Life & Disability Insurance Statement to all Third-Party Agencies and Similar Organizations: QE Solar accepts resumes only from contracted recruiting agencies with formal service agreements. Please do not send unsolicited resumes or outreach emails to our QE Solar employees, hiring managers, or team members without expressed consent or contract for services. QE Solar is not responsible for any fees or charges associated with unsolicited resumes or services.

Job Description THE COMPANY In business since 1969, Interport modifies and sells new and used shipping containers, serving customers throughout the Northeastern U.S. Established in 2004, Interport Secure Parking operates 24/7/365 secure facilities in Newark, NJ and Savannah, GA where local and regional intermodal drayage truckers park and store loaded and empty import and export containers being transported for global cargo owners, ocean carriers, and third-party logistics providers. Interport proudly employs and empowers a diverse team of exceptional individuals committed to providing our customers superior products, services, and solutions. General Summary Reporting to the Operations Supervisor, the Sales Yard Equipment Operator is responsible for moving Interport sales units and other equipment throughout the Sales yard using 7-high/4-high container handlers, forklifts and yard hustlers. The Sales Yard Equipment Operator is also responsible for fueling equipment, inspect containers upon yard entry as required. Major Duties and Responsibilities • Operates 7-high/4-high container handlers, forklifts and yard hustlers, • Unloads inbound trucks and loads outbound trucks as needed, • Feeds containers to the Modifications department as needed, • Puts Sales and Modification units away in their proper locations, • Assists the Container QC Associate in moving containers for inspection, etc. as needed, • Keeps the Sales yard neat, organized, and safe at all times, • Re-fuels all equipment, • Acts as backup for various other tasks in the Sales yard including container inspection, • Completes special projects as required including removal of weeds, trash and debris from yard, office clean-up and various other indoor/outdoor repairs, • Uses an iPad or other electronic device to record information in the company’s software, • Pre-trips equipment on a daily basis and record information in the company’s software, • Remains cross-trained in other areas of the Sales yard, • Assists with projects as required Minimum Requirements: • High School Diploma or General Educational Development (GED), • Valid New Jersey driver’s license in good standing with a clean driving history, • Strong verbal communication and interpersonal skills, • Experience working with iPad technology, • Willingness to work overtime, including off-hours “call-ins”, some holidays and weekends Employment is subject to the completion of due-diligence inquiries, including a background check and a pre-employment medical examination including a drug and alcohol screen, which will take place after a conditional offer is made. Preferred • Ability to perform basic computer tasks, • Prior experience driving a forklift and yard hustler Personal attributes that help make an individual successful in this role include: • Customer Service, • Committed, • Positive attitude, • Team-oriented, • Time management Work Environment While performing the duties of this position, the employee is frequently exposed to: • Heat and cold, • Noise, • Dust Physical Demands The physical demands described here are representative of those that must be met by an employee to successfully perform the minimum requirements of this position: • Position may require standing for long periods of time, climbing ladders and working in high places. It also requires the ability to lift 50 pounds. Position Type/Expected Hours of Work This is a full-time position and the hours of work are typically between 7:00 AM and 4:00 PM weekdays, with some weekends, when needed. Other Duties Please note that this job description is not designed to cover or contain a comprehensive list of activities, duties or responsibilities that are required of the employee for this job. Duties, responsibilities and activities may change at any time with or without notice. Morning Shift - 7:00 AM to 4:00 PM

The Truck-to-Truck Supervisor is responsible for the day-to-day coordination and oversight of drum transfers, compliance paperwork, and the safe movement of materials. This position ensures that all DOT and environmental regulations are followed, key compliance deadlines are met, and that facility operations run smoothly. The Supervisor provides hands-on leadership, ensuring timely, compliant, and efficient Truck-to-Truck (TTT) operations while maintaining strong communication with management, logistics, and safety teams. The supervisor needs to have experience operator WMS (warehouse Management System) Pay: $26/hr to $30/hr. Shift: (10:00 am 10:30 pm) Subject to OT Work Location: 1331 West Edgar Road Linden, NJ 07036 Why work for Clean Harbors? • Health and Safety is our #1 priority, and we live it 3-6-5!, • Competitive pay and benefits, • Comprehensive health benefits coverage after 30 days of full-time employment, • Group 401K with company matching component., • Generous paid time off, company paid training and tuition reimbursement., • Positive and safe work environments, • Opportunities for growth and development for all the stages of your career The Truck-to-Truck Supervisor monitors and ensures all key compliance deadlines, including 10-day drum transfer requirements, are consistently met. This position communicates with management regarding DOT compliance and operational issues that could affect business continuity, and coordinates with Corporate and National Logistics on carrier scheduling and equipment needs. The role maintains Truck-to-Truck systems and logs through Microsoft Outlook, Power Suite, and related databases to ensure timely and accurate documentation. The Supervisor partners closely with facility personnel to resolve any rejected drums or compliance issues, reports any leaks or releases to Health & Safety or Compliance Managers, and ensures DOT exemptions are properly applied before shipment. The position also includes hands-on forklift operation to offload, palletize, and reload materials, inspection of outbound containers, and maintaining a safe and compliant work environment. What does it take to work at Clean Harbors? • High School diploma or equivalent required;, • Must be 18 years or older;, • 4+ Years of related Supervisor or Lead or warehouse management experience;, • Logistic Experience, • Forklift experience Required (Willing to operate if needed), • Yard Switcher experience preferred but not required, • Ability to use computer;, • Ability to lift 50 or more pounds; Clean Harbors, a Clean Harbors company, has a commitment to excellence deeply rooted in a strong sense of tradition. Our entire business model revolves around keeping North American businesses green. We generate more than $1.2 billion in annual revenue as a world-class environmental service organization and market leader in industrial hazardous waste management, parts-cleaning technology, and oil re-refining. We collect over 200 million gallons of used motor oil each year and we have the largest re-refinery capacity in North America allowing us to re-refine more than 150 million gallons each year. Every day, we help our customers resolve their waste management needs and reduce their carbon footprint. PROTECTION. CHOICES. PEOPLE. MAKE GREEN WORK. Clean Harbors is an equal opportunity employer. Clean Harbors is committed to providing access, equal opportunity and reasonable accommodation for individuals with disabilities in employment, its services, programs, and activities. To request reasonable accommodation, contact ect@cleanharbors.com or 1-844-922-5547. Clean Harbors and its subsidiaries are a Military & Veteran friendly company. Clean Harbors is committed to complying with applicable pay transparency laws and ensuring fair and equitable compensation. The posted salary range reflects the minimum and maximum target for this role. Final compensation may vary based on factors such as location, experience, skills, and business needs. In addition to the base salary, some roles may be eligible for bonus or incentive compensation and a comprehensive benefits package. #CH *CH #LI_SAK

Competitive pay / Flexible hours - As a Data Entry Operator at Axion Data Services, you will: Enter data accurately and efficiently into various computer systems; Verify the accuracy and completeness of data entered; Utilize various software programs and tools to enter, update, and manipulate data;

Job Description Machine Operator Needed for Cable Manufacturing Company in Florham Park, NJ on All 3 Shifts! Pay: $25 - $27/hour Shifts: 1st. 6am-2pm ($25/hour ; Overtime: $37.50/hour 2nd. 2pm-10pm ($26/hour ; Overtime: $39/hour 3rd. 10pm-6am ($27/hour ; Overtime: $40.50/hour Location: Florham Park, NJ Job Description Operate and run cable manufacturing equipment. Monitor the running and quality of the cable output. Once fully trained, you will operate 1-2 cells independently. You will receive an order sheet that specifies the cable and material, set up everything, and input the order specifications into a computer. Basic editing of pre-written programs is required. Additionally, you will troubleshoot equipment during operations or breakdowns and constantly refill the material coating the cables. Responsibilities • Operate and monitor cable manufacturing equipment., • Ensure the quality of the cable output., • Operate 1-2 cells independently once fully trained., • Set up machines according to order specifications and input details into a computer., • Troubleshoot equipment during operations and breakdowns., • Refill the material coating the cables as needed.Job Type & Location This is a Contract to Hire position based out of Union, NJ. Pay and Benefits The pay range for this position is $25.00 - $26.00/hr. Individual compensation offered for this position within this range will depend on many factors, including qualifications, skills, relevant experience, job knowledge, geographic location, internal equity, and other pertinent job-related factors. Eligibility requirements apply to some benefits and may depend on your job classification and length of employment. Benefits are subject to change and may be subject to specific elections, plan, or program terms. If eligible, the benefits available for this temporary role may include the following: Medical, dental & vision Critical Illness, Accident, and Hospital 401(k) Retirement Plan Pre-tax and Roth post-tax contributions available Life Insurance (Voluntary Life & AD&D for the employee and dependents) Short and long-term disability Health Spending Account (HSA) Transportation benefits Employee Assistance Program Time Off/Leave (PTO, Vacation or Sick Leave) Workplace Type This is a fully onsite position in Union,NJ. Application Deadline This position is anticipated to close on Oct 9, 2026. About Aerotek Aerotek® Inc. provides staffing and services solutions in manufacturing, logistics, construction, aviation, facilities and maintenance. We provide the expertise, solutions and people required to rise to the challenges of North American industry. Headquartered in Hanover, Md., Aerotek operates a unified network of over 200 offices across North America, supporting more than 18,000 clients each year. Aerotek is an Allegis Group company, the global leader in workforce and business solutions. To learn more, visit: Aerotek.com | 1-888-AEROTEK. Aerotek offers weekly pay, employee benefits including medical, dental & vision, life insurance, health advocacy and employee assistance programs, a 401(k) plan, and employee discounts. The company is an equal opportunity employer and will consider all applications without regards to race, sex, age, color, religion, national origin, veteran status, disability, sexual orientation, gender identity, genetic information or any characteristic protected by law. San Francisco Fair Chance Ordinance: Pursuant to the San Francisco Fair Chance Ordinance, for all positions located in the city and county of San Francisco, we will consider for employment qualified applicants with arrest and conviction records. Massachusetts Lie Detector: It is unlawful in Massachusetts to require or administer a lie detector test as a condition of employment or continued employment. An employer who violates this law shall be subject to criminal penalties and civil liability. Use of Artificial Intelligence (AI): We may use Artificial Intelligence (AI) to support parts of our hiring process, including sourcing, screening, and evaluating candidates. AI helps assess applications and qualifications, but final decisions are made by our hiring team. By applying, you acknowledge and agree that your application may be reviewed using AI tools.

Job Description Munich Airport NJ LLC is an US-based subsidiary of the German airport operator Munich Airport. Munich Airport NJ LLC (MANJ) is responsible for the operations, maintenance and concession management and services at Newark Liberty International Airport (EWR) Terminal A. We are currently looking for a Software and Data Analyst Intern to join our team for the Fall 2026 semester. This is an onsite, paid internship position. Hours are flexible to accommodate your class schedule. As a member of the MANJ team, you will be part of a dynamic team, helping to enhance travelers’ journeys by providing best-in-class airport services and elevating travel experiences beyond expectations. The Software and Data Analyst Intern will assist the Facilities Maintenance team develop detailed Facilities Maintenance Power BI dashboards, utilize data from our infrastructure and create Maximo Enterprise Asset Management (EAM) processes. As well as daily supportive work and engineering tasks. Your duties/responsibilities • Under supervision, assist in the development of Power BI Dashboards for the Facilities department reporting data from Maximo and the airport systems HMI software’s. The student intern will request and receive support and guidance from management to complete assigned activities., • Have an intermediate to advanced grasp of Operating Systems, Data structures, algorithms and at least one modern programming language such as Python, JavaScript, etc., • Develop and optimize shared semantic models in Power BI using snowflake schema design., • Develop SQL queries to extract and manipulate data from our Maximo database for use in Power BI., • Design interactive Power BI dashboards and reports to present key facilities department metrics. Your skills & experience, • Currently enrolled in a 4-year college or university pursuing a bachelor’s degree with an expected graduation between December 2027 – July 2028., • Pursuing a bachelor’s degree in any of the following areas: Computer Science, Information technology, engineering, data science, advanced analytics, clinical informatics, or similar program with a total GPA of 3.2 or higher., • Proficiency in SQL for querying databases such as Microsoft SQL Server with database design principles is essential., • Hands-on experience with Power BI for creating insightful dashboards., • Strong programming skills in Python for statistical analysis and automation tasks., • Legally authorized to work in the US on a full-time, permanent, and ongoing basis without requiring sponsorship now or in the future., • A demonstrated ability to learn and employ the basics of research, design, and application within his or her discipline., • Consistent, detail-oriented, and excellent organizational skills.Good reasons why you should experience our airport family, • Be part of the team who will work with many partners and have an impact on one of the world’s largest airport systems, • Help Munich Airport, Europe’s only 5-star Airport, to build on its reputation in the USMunich Airport International US Holding and its subdivisions Munich Airport NJ LLC and Reach Airports are equal opportunity employers. The base salary range for this role is $21.50. You will learn a wealth of information about the aviation industry and airport operations while here, and if this internship goes full-time, additional benefits such as medical, dental, vision, and 401(k) will be offered! Total compensation, including base salary to be offered, will depend on elements unique to each candidate, including candidate experience, skills, education and other factors permitted by law. Munich Airport US Holding and its subdivision Munich Airport NJ LLC are equal opportunity employers. Munich Airport NJ LLC Terms and Conditions: 1. MANJ will only contact you via SMS to follow up on job applications and schedule interviews., 2. You can cancel the SMS service at any time. Just text "STOP" to the short code. After you send the SMS message "STOP" to us, we will send you an SMS message to confirm that you have been unsubscribed. After this, you will no longer receive SMS messages from us. If you want to join again, just sign up as you did the first time and we will start sending SMS messages to you again., 3. If you are experiencing issues with the messaging program you can reply with the keyword HELP for more assistance, or you can get help directly at {support email address or toll-free number}., 4. Carriers are not liable for delayed or undelivered messages, 5. As always, message and data rates may apply for any messages sent to you from us and to us from you. You will receive {message frequency}. If you have any questions about your text plan or data plan, it is best to contact your wireless provider., 6. If you have any questions regarding privacy, please read our privacy policy below. Privacy Policy: We collect your mobile number and related opt-in data for the delivery of SMS messages. Your mobile opt-in data and consent will not be shared with third parties or affiliates for marketing or promotional purposes. Powered by JazzHR Fi3oDpdaO3

Job Description Paylocity is an award-winning provider of cloud-based HR and payroll software solutions, offering the most complete platform for the modern workforce. The company has become one of the fastest-growing HCM software providers worldwide by offering an intuitive, easy-to-use product suite that helps businesses automate and streamline HR and payroll processes, attract and retain talent, and build a strong workplace culture. While traditional HR and payroll providers automate basic HR processes such as payroll and benefits administration, Paylocity goes further by developing tools that HR and businesses need to compete for talent and deliver against the expectations of the modern workforce. We give our employees what they need to succeed, including great benefits and perks! We offer 401(k) match and other perks that support you, your family, and your finances. And if it’s career development you desire, we provide that, too! At Paylocity, people matter most and have always been at the heart of our business. Help our award-winning technology company run effectively as you take on big challenges and find solutions with a position in Operations. Use your problem-solving skills to shape the way others see Paylocity. Launch your career with us! This is a 100% in-office role based at our Springfield, NJ location. Remote or hybrid work is not available for this position. Candidates must be able to work on-site three days per week during designated work hours. Position Overview The Distribution Assistant plays an integral role in making sure we provide exceptional service to our clients by accurately preparing and packaging payroll checks for delivery. Once a payroll has been processed it is the responsibility of the distribution team to ensure that over two million payroll checks per month are accurately packaged and picked up by the courier service. The distribution team prints, inserts, and packs payroll checks shipping to clients based on their needs. Primary Responsibilities The below represents the primary duties of the position, others may be assigned as needed. To perform this job successfully, an individual must be able to perform each essential duty satisfactorily. The requirements listed below are representative of the knowledge, skill, and/or ability required. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. • Accurately match each order’s checks/vouchers and ensure printing and packing instructions are followed., • Review and sign off all pack out sheets for approval indicating appropriate processes were followed., • Perform weekly inventory to ensure appropriate stocking of supplies., • Safely operate and troubleshoot printers, sealers, and inserting equipment., • Perform operator maintenance and minor repairs to printing and finishing equipment., • Act as keyholder to open and close distribution center. (If needed), • Interact directly with outside technicians for more advanced equipment repair as necessary. Make service calls as needed for critical equipment repairs., • Assist with inventory control by conducting weekly inventory counts., • Department equipment and procedural SME’s providing feedback to management, assist with training new hires, and keep training material up to date., • Respond and send e-mails related to CRM inquiries for any quality defects, tracking queries, delivery issue(s) and can remediate the issue and follow-up accordingly to determine root cause., • Timely and proactively follow-up on client requests for resolution., • Assist with the printing and preparation of advanced Tax Distribution work. (If needed), • Research and maintain key intradepartmental documentation., • Responsible in assisting nightly audit for accuracy and take corrective action on identifiable issues along with sending the tracking files in a timely manner., • Responsible for communication with shipping couriers as needed., • Provide feedback during team huddles and 1-1 meetings., • Available to work a fixed schedule, Part-time 3 days a week 8+ hours per day at the direction of the Manager and Full-time up to at least 5 days/40 hours per week., • Responsible for partnering with the Tax Distribution team to ensure mailing of timely payments to various state/local tax agencies, providing exceptional service to clients by accurately preparing and packaging agency checks for delivery., • Work overtime as needed, especially during year-end., • Other duties and projects as assigned Education and Experience • Experience in packing, mail room or distribution environment desirable., • High School or GED equivalent preferred., • Strong attention to detail required, • Must be able to work independently with minimal supervision Physical Requirements: • Mobility is required to stand for long periods, sitting, walking, and bending., • Ability to regularly lift, hold and carry objects weighing up to 30 pounds., • Ability to sit for extended periods: The role requires sitting at a desk or workstation for long periods, typically 7-8 hours a day, • Use of computer and phone systems: The employee must be able to operate a computer, use phone systems, and type. This includes using multiple software programs and inquiries simultaneously. Paylocity is an equal-opportunity employer. Paylocity is committed to the full inclusion of all individuals. We recruit, train, compensate, and promote regardless of race, religion, color, national origin, sex, disability, age, veteran status, and other protected status as required by applicable law. At Paylocity, we believe diversity makes us better. We embrace and encourage our employees’ differences in age, culture, ethnicity, family or marital status, gender identity or expression, language, national origin, physical and mental ability, political affiliation, race, religion or spiritual belief, sexual orientation, socio-economic status, veteran status, and other characteristics that make our employees unique. We actively cultivate these differences through our employee resource groups (ERGs), employee experiences, perspectives, talents, and approaches to drive innovation in the software and services we provide our customers. We comply with federal and state disability laws and make reasonable accommodations for applicants and employees with disabilities. To request reasonable accommodation in the job application or interview process, please contact accessibility@paylocity.com. This email address is exclusively designated for such requests, aligning with federal and state disability laws. Please do not send resumes to this email address, as they will be removed. The base pay range for this position is $15.19 - $21.68/hour however, base pay offered may vary depending on job-related knowledge, skills, and experience. This position offers a full range of benefits outlined here. This information is provided per the relevant state and local pay transparency laws for the location in which this position will be performed. Base pay information is based on market location. Applicants should apply via www.paylocity.com/careers.

Job Description Pay: $60/hr starting, $70/hr for experienced leads (+$5/hr if based in El Paso, TX or Titusville, FL) Schedule: 8 on / 6 off rotation, or Monday–Friday for El Paso/Titusville residents Home base: Live in any of 34 major U.S. airport cities – we fly you to the work Employment type: Full-time, direct hire Why This Role Stands Out Most A&P jobs make you choose between great pay and where you want to live. This one doesn't. You'll keep a large Learjet 60 fleet flying for a well-established Part 135 executive jet charter operator with 35+ years in business – and you can do it from home base in one of 34 cities across the country. • Top-tier pay: $60/hr to start, $70/hr for leads, plus overtime readily available, • Real time off: 8 days on, 6 days off, with alternating holidays, • Ownership from day one: Stock options that start vesting your first day, • Travel fully covered: Airline tickets, hotels, and up to $60/day for meals on the company card. Authorized travel time is paid., • Small crews, high standards: Work next to skilled techs who take pride in the job, in a culture where accountability is expected and egos are left at the door What You'll Do • Perform line and heavy maintenance, inspections, troubleshooting, servicing, and repairs on Learjet 60 aircraft, • Complete all work according to manufacturer manuals and FAA-accepted or approved data, • Follow applicable FARs, company procedures (GPM), and the FAA-approved Continuous Airworthiness Maintenance Program, • Read and interpret aircraft technical manuals and electrical drawings, • Move aircraft in the hangar and on the ramp, including tow-tractor operation, • Join weekly maintenance meetings to review project progress and resolve phase inspection, service, and repair issues with the Director of Maintenance, • Keep a clean, safe, and organized work area Expect 10–12 hour days in a fast-paced environment. What You Bring Required • FAA Mechanic Certificate with Airframe and Powerplant ratings, • 6+ years of experience meeting 14 CFR Part 65.83 requirements, • Experience with Learjet airframes and Pratt & Whitney PW305A engines, • Strong troubleshooting skills, • Working knowledge of FAR Parts 135 and 145, • Your own full tool set, • Ability to travel, work flexible schedules including nights, weekends, holidays, and on-call rotation, • Ability to lift 75 lbs, • Comfortable with computer data entry, Microsoft Office, and basic inventory management, • High school diploma or GED and a valid U.S. driver's license Nice to Have • 2+ years of Learjet 60 maintenance experience, • AOG / mobile maintenance experience Home Base Cities (34) ATL, AUS, BNA, BOS, BWI, CLT, DAL, DCA, DEN, DFW, ELP, EWR, FLL, HOU, IAD, IAH, JFK, LAS, LAX, LGA, MDW, MCO, MIA, MSP, OAK, ORD, PBI, PHL, PHX, SAT, SFO, SLC, STL, SEA Living in El Paso or Titusville? Choose a Monday–Friday schedule or a rotating schedule and earn an extra $5/hr. Living anywhere else on the list? Work the 8/6 rotation. Airline travel to and from your assigned maintenance location is provided from your home-base airport. Benefits • 401(k): Safe harbor match – 100% on the first 3% of pay, 50% on the next 2%. Immediately 100% vested., • Medical: Three plan options, including a 100% employer-paid HDHP, an 85% employer-paid PPO, and Texas-based HMO plans, • Dental, vision, and life insurance, • Stock options vesting from day one, • Paid time off Ready to Apply? If you're an experienced A&P who knows Learjets and wants top pay without having to relocate, apply today. We move quickly with qualified candidates. Employment is contingent on a pre-employment drug test, background check, and a post-offer, job-related physical where applicable. Equal opportunity employer.

Job DescriptionWho We Are: iAnthus Capital Management is a multi-state operator advancing the cannabis industry through cultivation, processing, and retail excellence. Cannabis is redefining sectors from healthcare to consumer packaged goods, and our mission is to build the most valuable brands and operational network nationwide. At iAnthus, we foster learning, career development, innovation, and collaboration. You will work alongside industry experts in an environment that values flexibility, professional growth, and meaningful contribution. Who You Are: You are a creative, energetic, and highly organized field marketer who thrives in fast-paced environments and enjoys connecting directly with consumers and retail partners. You understand how to bring a brand to life through engaging experiences, exceptional retail execution, and strong relationship-building. You combine creativity with discipline, ensuring all field activity is compliant, impactful, and aligned with sales and marketing goals. You are confident, adaptable, and capable of managing multiple activations, communications, and reporting requirements with professionalism and enthusiasm. Benefits: • 20 days of accrued Paid Time Off, • Ten Paid Holidays, • Paid Sick Leave, • Paid Parental Leave, • Medical, Dental, Vision, FSA, HSA, Transit Benefits, and 401(k), • Employer-Paid Short-Term Disability and Life Insurance, • Wellness Program, • Employee Assistance Program for employees & family members, • Employee Discounts, • Opportunity to work in a fast-growing industry where your creativity and execution directly influence successStarting Pay Rate: $50,000 + Comission Summary:The Wholesale Account Specialist works closely with the Wholesale team to maximize sales by targeting new accounts to add to our portfolio. The Wholesale Account Specialist will follow up with clients as needed to solicit feedback on products and services as well as assist in efforts to build and maintain relationships with customers. The Wholesale Account Specialist will also support management in the design and development of high-performance innovative sales strategies. Position Responsibilities:The Wholesale Account Specialist’s responsibilities include but are not limited to: • Services new and existing accounts, obtains orders, • Enter wholesale sales into the applicable software or POS systems., • Focuses sales efforts by opening new doors and managing those relationships., • Identifies new or trending products to add to the products offered., • Keeps management informed by submitting activity and results reports, such as daily call reports, weekly work plans, and monthly and category analyses., • Recommends changes in products, services, and policies by evaluating results and competitive developments., • Resolves customer complaints by investigating problems; developing solutions; preparing reports; and making recommendations to management., • Maintains professional and technical knowledge, • Provides historical records by maintaining records on area and customer sales., • Contributes to team effort by accomplishing related results as needed.Additional duties and responsibilities as assigned. The job description is not intended to cover or contain a comprehensive list of activities. This description reflects management’s assignment of essential functions, and it does not restrict the tasks that may be assigned. Duties and responsibilities may change at any time with or without notice. Company Culture: • Being a company ambassador and representing the brand appropriately., • Building relationships with community leaders and trust from our neighbors., • Following and implementing the company’s core values, including respect, diversity, sustainability, research, and service., • Ensuring adherence to the company’s cultural principles., • Participates and embraces a highly motivated team environment., • Implementing brand sales marketing strategies., • Technology - learn and keep up with innovative technology trends as presented., • Compliance – utilize internal and external information to understand federal and state laws and industry trends regarding medical marijuana.Minimum Qualifications:, • Demonstrate network connections in the market, • Demonstrate results in managing sales programs, and portfolios of initiatives through excellent influence skills., • Demonstrate ability and proven record of accomplishment in the driving process, efficiency, and growth improvements/results., • Big picture thinker, strategic, but able to distill functions and business interactions into the process and workflow to drive improvement and efficiency gains., • Effectively demonstrate analytical skills., • An effective and persuasive communicator with outstanding presence, presentation and negotiation skills that constantly strives for simplicity and clarity., • Strong leadership, team player., • Able to travel, as needed, including weekends where necessary to drive sales., • Excellent presentation skills and strong written and verbal communication skills required., • Proficiency with CRM and Microsoft office tools.Physical and Environmental Requirements:The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job., • Ability to work a minimum of 8 hours a day and rotating shifts;, • Flexible schedule availability including nights, weekends, and holidays;, • Ability to lift, push, and pull 50 pounds;, • Ability to sit, squat, bend, and kneel repetitively throughout a work day;, • Ability to stand for extended periods of time;, • Ability and willingness to work in the following conditions:, • General office environment;, • Extended computer usage;, • Extended phone usage including teleconferences, and Work environments that include exposure to, but not limited to, fumes, dust, odors, heights, indoor AC, no AC, motion, and noise. Powered by JazzHR 5vqdz5V93e

Job Description Join a USA Today Top Workplace! Morris Group, Inc., one of the largest machine tool distribution networks in North America, is a third generation, family owned and operated business that serves manufacturers of precision machined parts in the United States. Our mission is to help manufacturers maintain a competitive advantage in the world economy by improving productivity. Summary of Responsibility: A Field Service Technician is a key member of the Customer Support Department and is primarily responsible for the installation, preventive maintenance, solving and repair of Computer Numerically Controlled (CNC) Lathe, Milling and Multi-Functional Machining Centers. We are seeking customer focused professionals who have a positive attitude, a high interest in learning and great Customer service skills. This opportunity is an above average platform for technical advancement and compensation growth. What You Will Contribute: The CNC Field Service Technician must have or be willing to learn through training on the job and classroom an understanding of mechanical drawings, electrical/pneumatic/hydraulic schematics, PLC ladder diagrams and testing equipment required to effectively diagnose and resolve issues with electrical/mechanical components, as well as electro-mechanical and machine control systems. Daily travel from home to Customer facilities with occasional overnight hotel stays required when servicing remote Customer locations within the designated coverage territory or when participating in remote training programs. Demonstrating a willingness to help others and be a team member Install, commission, calibrate, maintain, tackle, diagnose, and repair CNC equipment and accessory CNC equipment at customer facilities. Service calls also include operator training, networking between systems, software applications, preventive maintenance, major assembly replacements and alignments, overhauls/refurbishments, upgrades/retrofits, and un-installation services. Provide a direct communication link between the Customer and the Service Group of the Robert E. Morris Company. Provide voice of Customer feedback. Through service and Customer relationships, build brand dedication. Conduct travel and work in a safe manner, constantly learning new technology and soft skills. Apply machine tool manuals, technical documents, as well as internal and external authorities to optimally diagnose and resolve CNC equipment issues. Effectively understand and use the Salesforce Lightning Customer Support computer system. Qualifications & Competencies: Proficient verbal and written communication and Customer relation skills. Able to interact and effectively communicate in person and over the phone with customer and co-workers. Present a professional image. Must be adaptable to changes and able to deal with change, delays, or general work-related issues. Basic digital literacy and shown understanding of MS Word, Excel, and Outlook. Must have, and/or be willing/capable of being trained to develop, electro-mechanical skills (motors, drives, transformers etc.). Knowledge of machine tool manufacture, installation, operation, maintenance & repair and/or a broad shop background – is a plus. Basic mechanical and logical solving skills are a must. Rational decision making and problem-solving skills. Work Environment Exposure to manufacturing/machining environments which may present possible hazards such as noise, electricity, chemicals, heavy equipment, and other automated or manual machinery. General office and training environment experienced at the Robert E. Morris Company. Other Functions: Perform related duties as required The duties listed above are intended only as illustration of the various types of work that may be performed. The omission of specific statements of duties does not exclude them from the position if the work is similar or a logical assignment to the position. What’s in it for You: We take great pride in our employees and offer a variety of benefits that allow our employees to be successful inside and outside of work: Competitive starting salary Market competitive comprehensive health benefits including a zero premium medical plan offering, vision, dental, and company paid life insurance 3+ Weeks’ Vacation to Start 10 Company Paid Holidays 401(k) retirement plan with company contribution Tuition reimbursement Employee appreciation events and perks Employee Assistance Program Mental and Physical Requirements: The physical demands and characteristics of the work environment described here are representative of those that must be met by an employee to successfully perform the essential functions of the job. Reasonable accommodation may be made to enable individuals with disabilities to perform the essential functions. Must be highly mobile, able to access all areas of the premises. Ability to concentrate and remain focused while prioritizing multiple tasks, responsibilities, and projects. Ability to sit for prolonged period of times. Able to perform bending, twisting, stooping, reaching, and lifting of moderate to heavyweight material up to 50 lbs. with assistance from equipment or other employees. Ability to frequently use hands and arms. Vision abilities required by the job include close vision, distance vision, peripheral vision, depth perception and the ability to adjust focus. Ability to work responsibly and professionally in dynamic job sites that may involve tight timelines, changing priorities, and interaction with customers and team members. Certain positions are designated as safety-sensitive due to the nature of the work performed. Employees in these roles may also be expected to: Ability to stand, walk, bend, kneel, crouch, climb, and reach for extended periods while servicing equipment. Ability to work in tight spaces or awkward positions, including accessing equipment interiors and elevated areas. Strong hand–eye coordination and fine motor skills required for precise electrical, mechanical, and diagnostic work. Ability to work in industrial environments, with exposure to noise, lubricants, coolants, metal chips, and other manufacturing conditions, while consistently wearing required personal protective equipment (PPE). Qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability, protected veteran status or other characteristics protected by law. Requisition #: 1440B, Newark NJ