Trabajos computer operator en Indianapolis, IndianaCrear alertas

Job DescriptionDescription: Position Summary: Reports and takes direction from the Facility Operator supervisor and Maintenance Tech supervisor and is responsible for monitoring the Building Authority Automation Systems and performing plumbing/preventative maintenance, repair and alterations for all Building Authority buildings. Specific Duties: • Performs preventative maintenance, repair, and installation of plumbing systems to include;, • Valves, • Pumps, • R.P Devices, • Plumbing fixtures, • Irrigation Systems, • Drinking Fountains, • Fire Sprinkler Systems, • Kitchen and Laundry Equipment, • Air, Gas, Water, Sewer, Drainage Lines 2. Assist other shops with maintenance repairs, 3. Operates and monitors the automation systems for Building Authority properties., 4. To perform all other duties as assigned by the Facility Operator Supervisor., 5. Comply with Building Authority policies, procedures, and safety regulations. Equipment used: The Plumber/Operator is expected to be familiar with equipment and tools including Torch Set, Pipe and Cast-Iron Snap Wrenches Various Saws, Various Drills, Pipe Threader, Auger Machines, RP Device Tester, Building Automation Computer, Microsoft Office. Requirements: Minimum Qualifications: • High School Diploma., • Valid Indiana Driver’s License, • Ability to work well with others including fellow employees, outside vendors, contractors, and customers, • Previous experience and working knowledge in the preventative maintenance, repair and installation of plumbing systems., • Technical skills -the expertise necessary to perform a specific role., • Solid work ethic - a set of values based on the ideals of discipline and hard work., • Good attitude – the way one views work and life situations., • Self-motivated - ability to do what needs to be done without prompting, self-managing., • Team player – person who works well with others., • This position requires work in an indoor building setting and exposed to outdoor environments., • This position requires working independently, as well as part of a team., • This position requires verbal and face-to-face contact with others on a daily basis., • This position requires the use and knowledge of maintenance tools. The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. 20/40 vision or corrected vision is required for this role. Frequency Key: Never – 0 hours Rare – up to 1 hour Occasional – 1-3 hours Frequent – 3-6 hours Constant – 6-8 hours. Sitting Occasional Near Vision Constant Walking Frequently Far Vision Occasional Climbing stairs Occasional Hearing Constant Crouching/Bending/Stooping Constant Talking Frequent Reaching Constant Smell Never Grasping Occasional Lifting/Carrying (# 50 lbs) Frequent Pushing/Pulling Frequent Travel Rare AAP/EEO Statement IMCBA is committed to being an equal opportunity employer. Company policy is to offer equal opportunity to all qualified employees and applicants for employment without regard to race, color, religion, national origin, sex, age, veteran status, disability or any other category protected by applicable federal, state or local laws. This policy is applicable to recruitment, hiring, rates of pay, job assignments, promotion, training, discipline, and all other terms and conditions of employment. Reasonable Accommodations IMCBA complies with the Americans with Disabilities Act (ADA) and the ADA Amendments Act (ADAAA). As such, IMCBA will make reasonable accommodation for known physical or mental disabilities of a qualified and disabled applicant or employee, unless the accommodation would cause an undue hardship on the operations of the company. Because the need for an accommodation is often not apparent, it is the responsibility of the employee to request accommodation. Requests should be made to the Human Resources Department. The individual should identify what accommodation he or she believes is needed in order to perform the essential functions of the job. Employees may be asked to provide medical evidence to support the need for the requested accommodation. Please contact the Human Resource Department with any questions or requests for accommodation. Other Duties Please note this job description is not designed to cover or contain a comprehensive listing of activities, duties or responsibilities that are required of the employee for this job. Duties, responsibilities, and activities may change at any time with or without notice.

At Lilly, we unite caring with discovery to make life better for people around the world. We are a global healthcare leader headquartered in Indianapolis, Indiana. Our employees around the world work to discover and bring life-changing medicines to those who need them, improve the understanding and management of disease, and give back to our communities through philanthropy and volunteerism. We give our best effort to our work, and we put people first. We’re looking for people who are determined to make life better for people around the world. Organization Overview: Lilly is currently constructing an advanced manufacturing facility for production of API (Active Pharmaceutical Ingredient) molecules located in Lebanon, IN. This facility is Lilly’s largest investment in manufacturing capacity and is intended to provide APIs for current and future products, including new modalities. This is a unique opportunity to be a part of the startup team for a greenfield manufacturing site, and the successful candidate will help to build the processes and facility to enable a successful startup into GMP manufacturing operations. Position Brand Description: The Lead Operator for API manufacturing operations is directly responsible for the production of API molecules used in Lilly medicines. The Lead Operator will be responsible for upholding a safety-first, quality-always mindset in the production of API while running a production process that incorporates a wide range of unit operations. In the project delivery phase and startup phase of the project (startup expected 2025 to 2027), roles will be fluid and dynamic as we endeavor to support the project delivery, build a new organization, develop and implement the necessary systems and business processes required to support GMP operations, and build the site culture. This will require significant collaboration, creativity and resilience as the site grows to a full scale GMP manufacturing through start up. Responsibilities: • Maintain compliance with all regulatory requirements at all times., • Support the execution of the production plan for the site., • Carry out daily monitoring testing and cleaning duties as assigned on the above listed systems to ensure equipment and systems are in good operating conditions and they are maintained in accordance with local and corporate regulatory requirements., • Enter Trackwise events, participate in and lead CAPA investigations, • Troubleshoot and diagnose process problems and take appropriate actions to minimize deviations or site impact, • Understand Health, Safety & Environmental-regulated environment and application of Health & Safety/Process Safety standards in order to execute key/critical GMP duties., • Understand other area processes & their operational hazards and being able to react appropriately., • Monitor and collect data on equipment use and performance i.e. trying to anticipate potential equipment reliability problems., • Work with Maintenance and Technical Support to respond appropriately to potential utility supply upsets or equipment failure., • Contact the appropriate help if there is a problem or an event (spill/deviation/incident) during processing., • Communicate to other shifts regarding the status of the area operations and details of any issues/problems that have occurred at handover., • Actively participate in assigned building & area operations such as safety audits, procedure co-ordination, housekeeping and improvement projects., • Be trained and qualified on all specified unit operations within the building., • Identify concerns for informal or formal discussion (shift meetings, safety representative)., • Know and follow cGMP practices, safe work habits, plant dress code, hygiene standards, and housekeeping requirements unique to the work area and job classification., • Ability to effectively communicate (electronically, written and verbal)., • Basic computer skills (desktop software) are required. Basic Requirements: • High School Diploma or equivalent, • Qualified applicants must be authorized to work in the United States on a full-time basis. Lilly will not provide support for or sponsor work authorization or visas for this role, including but not limited to F-1 CPT, F-1 OPT, F-1 STEM OPT, J-1, H-1B, TN, O-1, E-3, H-1B1, or L-1., • Completion of Post Offer Exam or Completion of Work Simulation if applicable., • 3+ years chemical processing experience or equivalent comparable manufacturing experience Additional Preferences: • Previous experience in facility/area start-up environments, • Previous experience in a pharmaceutical manufacturing operation with PSM-regulated/hazardous chemicals, • Ability to assume leadership and prioritize daily priorities without direct supervision, • Solid understanding of FDA guidelines and cGMP requirements, • Strong organizational skills and ability to handle and prioritize multiple requests, • Knowledge of lean manufacturing principles, • Flexibility – ability to troubleshoot and triage challenges, • Ability to understand technical nomenclature and language as well as work with mathematical formulas, • Manual material handling as appropriate, • Bend, reach, stretch, climb ladders, and work in tight spaces, • Stand for long periods Additional Information: • Ability to work rotating 12-hour day or night shifts, • Ability to work flexible schedules during startup period Lilly is proud to be an EEO Employer and does not discriminate on the basis of age, race, color, religion, gender identity, sex, gender expression, sexual orientation, genetic information, ancestry, national origin, protected veteran status, disability, or any other legally protected status. Our employee resource groups (ERGs) offer strong support networks for their members and are open to all employees. Our current groups include: Africa, Middle East, Central Asia Network, Black Employees at Lilly, Chinese Culture Network, Japanese International Leadership Network (JILN), Lilly India Network, Organization of Latinx at Lilly (OLA), PRIDE (LGBTQ+ Allies), Veterans Leadership Network (VLN), Women’s Initiative for Leading at Lilly (WILL), enAble (for people with disabilities). Learn more about all of our groups. Actual compensation will depend on a candidate’s education, experience, skills, and geographic location. The anticipated wage for this position is $25.96 - $41.25 Full-time equivalent employees also will be eligible for a company bonus (depending, in part, on company and individual performance). In addition, Lilly offers a comprehensive benefit program to eligible employees, including eligibility to participate in a company-sponsored 401(k); pension; vacation benefits; eligibility for medical, dental, vision and prescription drug benefits; flexible benefits (e.g., healthcare and/or dependent day care flexible spending accounts); life insurance and death benefits; certain time off and leave of absence benefits; and well-being benefits (e.g., employee assistance program, fitness benefits, and employee clubs and activities).Lilly reserves the right to amend, modify, or terminate its compensation and benefit programs in its sole discretion and Lilly’s compensation practices and guidelines will apply regarding the details of any promotion or transfer of Lilly employees. #WeAreLilly

Position: Porter JOB TITLE: Porter REPORTS TO: Community Manager DIRECT REPORTS: No Who We Are BH is a people-first multifamily owner and operator that grew from a small startup into one of the nation's largest commercial real estate companies. Founded in 1993, BH is celebrated for its simple commitment to doing business the right way and investing in its team. Today, BH manages over 100,000 units, employs over 2,800 people, owns its processes in-house, and is praised by Fortune Magazine as the “Best Workplace for Women,” “Best Workplace for Millennials,” and “Best Workplaces for Diversity.” Powered by innovation and a can-do attitude, BH improves daily, striving to construct a smarter way to live, invest, manage, and grow. BH is passionate about setting the standard in the multifamily industry. We are a welcoming band of go-getters who think big, sweat the details, and take our work (but never ourselves) too seriously. We set our sights high, own our mistakes, and turn lemons into lemonade. We are incredibly proud of where we’ve come from and are ready to tackle what’s next. Come join us! Role Overview As the Porter, you’ll have a big mission. If you choose to accept it, your mission will be to maintain the condition of the exterior grounds and common areas of the property, plus the interior common areas. Exhibits strong commitment to the service needs of the internal and external customers. Represents the company in a professional and courteous manner. As you can likely tell, 'how' things are done matters just as much as ‘what’ was done here at BH! Key Responsibilities • The Porter’s primary responsibility is to maintain the condition of the exterior grounds and common areas of the property, plus the interior common areas., • Assists with trash outs after move-outs, when applicable., • Responsible to maintain the condition of the exterior grounds and common areas of the property, plus the interior common areas. Examples include, but are not limited to: trash chute, trash compactor, landscaping, parking lots, sidewalks, driveways, buildings and gutters., • Responsible for overall organization and cleanliness of work areas and maintenance shops., • May assist with cleaning and maintaining the pool and surrounding area., • Post notices to vacate and other community communication, if applicable., • Previous knowledge of grounds maintenance, landscaping and/or general maintenance/janitorial experience is a plus., • Working knowledge of basic interior/exterior maintenance, hand tools and cleaning equipment., • Basic knowledge of building maintenance and repair is a plus., • Lifting up to 50 pounds., • Full range of motion with upper and lower body. Continuous movement, including, but not limited to, standing, walking, bending, stooping, crawling, and climbing stairs., • Ability to work with both hands for frequent grasping and manipulation., • Push or pull items and reach overhead., • Operation of a motor vehicle onsite, if applicable., • Exposure to all weather conditions. Seniority Level: Entry level Industry: Property Management Employment Type: Full-Time Location: Onsite Work Schedule: Monday-Friday (work schedule may vary). Some overtime may be required and ability to work extended hours including “on-call” and/or participate in a rotating “on-call” schedule as needed to meet business needs. BH is an Equal Employment Opportunity Employer. We foster the diverse voices of our community by advocating for inclusivity, celebrating our differences, and continually evolving our practice to make BH a better place to work and live. Our posted compensation reflects the cost of talent across multiple US geographic markets. Pay is based on a number of factors and may vary depending on job-related knowledge, skills, and experience.

Job DescriptionHeartland Food Products Group is a global leader in the consumer packaged goods (CPG) industry, producing low-calorie sweeteners, coffee, coffee creamers and liquid water enhancers. We manufacture and market Splenda, the #1 brand in the low calorie sweetener category and the most recognized in the world. We make coffee, tea and water taste better and help people live happier, healthier and longer lives by making it easy to reduce sugar. We offer an excellent compensation and benefits package. Come grow with us! This role is not a remote opportunity, it is on-site at our Manufacturing Plant in Indianapolis, Indiana. 2nd shift hours: 2pm shift; 2pm-10:30pm Mon-Fri. 3rd shift hours: 10pm-6:30am Sun-Thurs. Scope: The Production Operator is capable of efficiently operating machinery on product line in Sweeteners equates to either Clouds or Ropaks and maintains documentation with a high degree of accuracy and quality. Essential Duties and Key Responsibilities: • Promotes safety and conducts him/herself in accordance with all safety guidelines at all times., • Inspects products for defects, and measure products to determine accuracy of machine operation, using rules, templates, or other measuring instruments., • Observes machine operation to detect product defects or machine malfunctions, adjusting machines, within tolerances, as necessary., • Reads job orders to determine product specifications to plan operational sequences., • Positions, loads, and secures stock material required for production, manually or by using power assisted equipment., • Makes minor electrical and mechanical repairs and adjustments to machines and notify supervisor/ maintenance when major service is required., • Starts up and shuts down manufacturing equipment following SOPs., • Maintains and completes documentation of permanent records for the company and its customers with a high degree of neatness and accuracy., • Utilizes all food safety and food security guidelines, including Safe Quality Foods (SQF) good manufacturing practices and Hazard Analysis Critical Control Points., • Demonstrates essential problem-solving methods and initiative., • Complies with all food manufacturing and safety regulations., • Demonstrates ability to establish and maintain effective working relationships with coworkers, supervisors, and other company employees., • Must have a high school diploma or equivalent, • Must have ability to understand oral and written instructions in English, • Must work well in a team environment and have strong communication skills, • Must have good job performance and attendance records, • Prior team lead experience is preferred, • Must be able to physically perform the functions of climbing, balancing, stooping, kneeling, crouching, reaching, standing, walking, pushing, pulling, lifting, grasping, feeling, talking, hearing, and repetitive motions., • Must be able to work seated using a computer and phone for long periods of time., • Must be able to work extended hours, such as daily overtime and an occasional weekend., • Must possess visual acuity to document company records., • Continuous walking throughout plant and distribution center., • Lifting up to 40 pounds #IND2

Owner Operator | Dry Van Location: Indianapolis, IN Company: Christenson Transportation Pay: $1.25 to $1.75 per mile Route Type: otr Start Date: ASAP About the Position WHAT ARE YOU WAITING FOR? CDL-A Lease Purchase Opportunity Unlock Your Potential with Christenson Transportation! Earn $190,000 – $230,000 Gross Annually! 2025 & 2026 Best to Drive For! At Christenson Transportation, we’re not just a trucking company — we’re a customer-based carrier that truly values our drivers. Whether you're an experienced driver ready to own your truck or looking to lease and eventually own, we have the perfect fit for you! What You Can Expect: Earn $190,000 – $230,000 gross yearly ️ Average 2500–3000 miles per week Late-model 2024–2026 Peterbilt 579 Epic Ultra Loft 2–3 weeks out with 2–3 days home (depending on location) ✅ NO Credit Check ✅ NO Down Payment ✅ NO trailer rental fees ✅ NO touch freight ✅ NO forced dispatch ️ 100% of truck & trailer maintenance covered 100% tire and maintenance discounts ️ 100% tolls paid by Christenson ⛽ 100% of fuel discounts passed on to you! ⚖️ 100% Pre-paid legal plan — paid by Christenson 70% Drop & Hook Other Benefits & Perks: FREE WIFI Tablet with unlimited data for live streaming Low weekly payments Lease Completion Bonus: Up to $7,500! Customer-based freight Additional pay: Multiple stop, layover, & detention Pet and passengers allowed (conditions apply) 24/7 driver lounge with showers, washer/dryer, computer/internet & more Longevity STAY PAY Bonuses Paid every 90 days after 1 year of service! Year 1: $1,000 total ($250 quarterly) Year 2: $2,000 total ($500 quarterly) Year 3: $3,000 total ($750 quarterly) Year 4: $4,000 total ($1,000 quarterly) Year 5+: $5,000 total ($1,250 quarterly) APPLY TODAY! Take the wheel of your future — Join Christenson Transportation now! Requirements Must have 2 years of verifiable Class A CDL experience. Must have a valid Class A CDL. Must have a valid DOT physical. Must pass a DOT pre-employment drug screen. No DUI or DWI convictions within the past 5 years. Must be able to read, write, and speak the English language in accordance with FMCSR. Stable job history for the past 3 years. No more than 3 preventable accidents in the last 3 years. No convictions for a "serious or disqualifying traffic violation" within the last 3 years, including: Excessive speeding of 15 mph or more over the posted limit. Reckless driving Improper or erratic lane changes Following to close Hit and run, failure to report, and accident No suspension/revocations in the past 12 months. No "preventable" DOT reportable accidents in the past 3 years.

Position: Service Technician JOB TITLE: Service Technician REPORTS TO: Community Manager DIRECT REPORTS: No Who We Are BH is a people-first multifamily owner and operator that grew from a small startup into one of the nation's largest commercial real estate companies. Founded in 1993, BH is celebrated for its simple commitment to doing business the right way and investing in its team. Today, BH manages over 100,000 units, employs over 2,800 people, owns its processes in-house, and is praised by Fortune Magazine as the “Best Workplace for Women,” “Best Workplace for Millennials,” and “Best Workplaces for Diversity.” Powered by innovation and a can-do attitude, BH improves daily, striving to construct a smarter way to live, invest, manage, and grow. BH is passionate about setting the standard in the multifamily industry. We are a welcoming band of go-getters who think big, sweat the details, and take our work (but never ourselves) too seriously. We set our sights high, own our mistakes, and turn lemons into lemonade. We are incredibly proud of where we’ve come from and are ready to tackle what’s next. Come join us! Role Overview As the Service Technician, you’ll have a big mission. If you choose to accept it, your mission will be to assist with the oversight of the physical assets and ensuring customer satisfaction. This position will diagnose problems and makes repairs in areas such as HVAC, electrical, plumbing, carpentry, dry wall, interior and exterior structural, appliances, and assist with apartment make-readies. This position also assists with preventive maintenance and construction or rehabilitation projects for the property. Exhibits strong commitment to the service needs of the internal and external customer. Represents the company in a professional and courteous manner. As you can likely tell, 'how' things are done matters just as much as ‘what’ was done here at BH! Key Responsibilities • Uses industry-specific technology to establish priorities with daily assistance from Community Manager and Service Manager., • Completes maintenance requests, replacements, and upkeep within company standards including exterior grounds and common areas of the property, performing HVAC repair and assisting with make readies as needed., • Assists with the identification and correction of hazardous community conditions and liabilities and reports hazards to Community Manager and Service Manager., • Assist in ensuring that established preventive maintenance programs are followed and documented per BH program guidelines., • Responsible for the maintenance and security of all property-issued tools., • Post notices to vacate and other community communication, if applicable., • Shares on-call responsibilities, including inclement weather conditions, with the maintenance team. Responds to resident requests per company standards., • Understands and complies with Occupational Safety & Health Administration (OSHA) and all other safety requirements. Knowledge of federal, state, and local code and internal policies, initiatives and systems regarding maintenance., • Minimum of two years of general maintenance and safety experience., • Intermediate computer skills, including industry specific technology required to perform job functions., • Regularly performs manual, task-oriented work under direct supervision., • High School diploma is a plus., • Required Certifications: EPA section 608; Type II – HVAC., • Lifting up to 50 pounds., • Full range of motion with upper and lower body. Continual movement including, but not limited to: standing, walking, bending, stooping, crawling, and climbing stairs., • Ability to work with both hands for frequent grasping and manipulation., • Push or pull items and reaching overhead., • Operation of a motor vehicle onsite, if applicable. Work Schedule: Monday-Friday (work schedule may vary). Some overtime may be required and ability to work extended hours including “on-call” and/or participate in a rotating “on-call” schedule as needed to meet business needs. BH is an Equal Employment Opportunity Employer. We foster the diverse voices of our community by advocating for inclusivity, celebrating our differences, and continually evolving our practice to make BH a better place to work and live. Our posted compensation reflects the cost of talent across multiple US geographic markets. Pay is based on a number of factors and may vary depending on job-related knowledge, skills, and experience.

Job Description Founded in 1954, Vibrant Ingredients is a leading provider of natural, clean label ingredients and systems that power extraordinary food and beverage experiences. The company’s broad portfolio — including natural flavors, botanical extracts, functional nutrition, cold brew coffee, tea essences, and food protection solutions — enhances taste, texture, color, shelf life, and performance across a wide range of applications. Vibrant operates four state-of-the-art facilities across the United States and works with leading brands, manufacturers, and foodservice operators. With vertically integrated capabilities and a proven track record of innovation and execution, Vibrant helps customers accelerate to market without compromise. About the role: We are a trusted partner to our customers when it comes to innovation and an industry leader in clean label ingredients, we are a true partner. We collaborate with our customers in ways that respect people and the environment. A commitment to Purely Better™ drives our innovation team to discover new, on trend solutions. As a Batching Operator, you will be responsible for preparing, measuring, and mixing ingredients according to batch paperwork and recipes to create products with exceptional food protection, texture, color, and flavor. Including completion of quality checks, verification of rework being used. How will you contribute: To perform this job successfully, an individual must be able to perform each essential duty satisfactorily. Reasonable accommodation may be made to enable qualified individuals with disabilities to perform essential job functions. Essential job functions and duties include, but are not limited to: • Accurately follow batch paperwork and recipes to prepare the products with the correct ingredients, weights, and measurements., • Operate batching equipment such as scales, blenders, mixers, and pumps to process materials including SOPs., • Monitor the equipment and process to ensure quality standards are met., • Troubleshoot issues that arise during the batching process., • Communicate effectively with the production team and shift supervisor., • Maintain a clean and organized work area., • Adhere to all safety, GMP, and quality regulations and procedures., • Partner with Quality Assurance Technicians for product approvals and variances, • Work alongside Extraction and Packaging department to ensure product availability for efficient scheduling., • Complete Clean-In-Place (CIP) as needed., • High school diploma or GED equivalent., • Prior experience in food or beverage manufacturing, batching, or related field is preferred., • Ability to read and interpret documents such as batch paperwork, recipe cards, and safety rules., • Good math skills and ability to calculate weights and measurements., • Basic computer skills., • Strong attention to detail and ability to multi-task., • Ability to work in a fast-paced environment and adhere to production schedules., • Generous time off for vacations, • Paid Holidays, • 401(k) with company match, • Tuition reimbursement, • Medical/Dental/Vision Vibrant Ingredients, headquartered in Lake Mary, FL, is one of the world's leading independent providers of natural ingredients. With a legacy spanning over 70 years, we deliver a diverse portfolio of clean label ingredients and innovative system solutions to the food and beverage industry. Our commitment to quality and performance is reflected in our American-made products, which enhance both taste and functionality. Backed by advanced manufacturing capabilities, we specialize in fermentation, patented cold brew extraction, custom flavor development, and a range of drying and blending technologies. Operating from four state-of-the-art facilities strategically located across the U.S., we ensure the accessibility of real, high-quality ingredients—helping our customers create better-for-you food and beverage for consumers. "Improving the food and beverages consumed by providing real ingredients from nature that work." This position is currently classified as on-site. Employees are eligible to participate in Medical, Dental, Vision, Life Insurance, 401(k), Holidays, Vacation, Tuition Reimbursement Program. The final salary offered for this position may take into account a number of factors including, but not limited to, location, skills, education, and experience. The Company reserves the right to modify, update, change and/or make corrections to this job description, at the sole discretion of senior management, at any time during the employee’s employment term, at the sole discretion of management. EEO Statement Vibrant Ingredients is an equal opportunity employer committed to employing a diverse workforce and providing accommodations for people with disabilities in all parts of the hiring process as required under its Employment Accommodation Policy. Vibrant Ingredients will work with applicants to meet accommodation needs that are made known to Vibrant Ingredients in advance. Please no external recruiters 2nd Shift: 2p-10:30p 3rd Shift: 10p-6:30a

Job DescriptionDescription: SUMMARY Supports our production operations by ensuring the optimal performance of manufacturing equipment. In this hands-on role, you will be responsible for performing preventative maintenance, troubleshooting mechanical and electrical issues, and repairing production machinery to minimize downtime and maximize efficiency. The ideal candidate has a strong background in industrial maintenance, a proactive approach to problem-solving, and a commitment to workplace safety and continuous improvement. ESSENTIAL FUNCTIONS • Responsible for maintaining company-owned machinery and equipment in proper working order, • On-call emergency repairs, • Responsible for taking control of breakdowns, • Execute a plan of continued improvement of machine safety and general housekeeping, • Work with crews to complete all preventative maintenance, • Work with machine operator to troubleshoot and determine root cause of mechanical issues, • Respond quickly to maintenance requests and prioritize effectively, • Work hand in hand with Maintenance Manager to resolve any accident waiting to happen forms, • Work as a team to maintain organization and inventory of maintenance shop and tools Education: High School Diploma or Equivalent required Experience Electrical certification preferred** Corrugated packaging industry a plus** Strong knowledge of mechanical machinery Ability to use shop tools and equipment, drill press, shop grinders, welders, oxy-acetylene torch A good understanding of hydraulic and pneumatic systems A strong trouble shooting and problem solving ability with practical, mechanical & electrical aptitude Must be able to read and interpret both electrical and mechanical drawings Must be fully computer literate with Microsoft environment SPECIFIC KNOWLEDGE, SKILLS, OR ABILITIES • Strong written and oral communication., • Organization and attention to detail., • Analytical and problem-solving skills., • Time management., • Systems analysis., • Mathematical and deductive reasoning., • Critical thinking. The physical demands described here are representative of those that must be met by an employee to successfully perform the functions of this job with or without reasonable accommodation. The work environment characteristics described here are representative of those an employee encounters while performing the functions of this job. Physical Requirements: While performing the duties of this job, the employee may be regularly required to stand, sit, talk, hear, reach, stoop, kneel, and use hands and fingers to perform maintenance on machinery Ability to lift up to 50 pounds on a regular consistent basis. Must be able to wear personal protective equipment. Work Environment: Exposure to moving mechanical parts. Wet and or humid conditions Office Setting, sitting for long periods of time. Occasionally exposed to high, precarious places, fumes or airborne particles and vibration. Noise level in the work environment is usually loud. Disclaimer: This list does not represent all physical demands. Descriptions are representative of those that must be met by employee to successfully perform the essential functions of the job. Reasonable accommodation may be provided to enable individuals with disabilities to perform the jobs’ essential functions. Welch Packaging is proud to be an equal opportunity workplace. Qualified applicants will receive consideration for employment without regard to race, color, religion, sex, national origin, sexual orientation, gender identity, disability, or protected veteran. Requirements:

We are seeking a Controls Design Engineer to design, develop, and implement electrical control systems, including PLC-based hardware, HMI design and programming, machine vision systems, and related software solutions. This role offers the opportunity to lead medium-scale projects, develop innovative automation solutions, and grow technical expertise in a fast-paced, collaborative environment. Why Work With Us • Flexible Schedule – We support work-life balance with a flexible work schedule., • Hybrid / Work From Home – Enjoy a hybrid work environment with work-from-home flexibility., • Flexible PTO – Take time off as needed with a flexible paid time off policy., • Comprehensive Health Benefits – Medical, dental, and vision coverage for you and your family., • Health Savings Account (HSA) – Assistance with managing healthcare expenses., • Gym Membership – Encouraging a healthy, active lifestyle., • Quarterly Profit Sharing – Share in the success of the company through quarterly profit-sharing., • Retirement Plan – A competitive retirement plan to support your long-term financial goals., • Referral Program – Earn rewards for referring top talent to our team. Key Responsibilities System Design & Development • Design and develop electrical control systems, equipment, and machinery, including PLC hardware, HMI applications, and machine vision systems., • Create detailed design specifications, wiring diagrams, and control system documentation. Software Development • Develop PLC software from the ground up using industry best practices., • Customize control software to meet client requirements and project specifications., • Design and program intuitive HMIs to support effective operator interaction. Project Leadership • Lead medium-scale projects, ensuring alignment with scope, schedule, and budget., • Collaborate with clients, vendors, and internal teams to deliver successful project outcomes., • Prepare and maintain project documentation such as design drawings, progress reports, and timesheets. Testing & Commissioning • Develop and execute test plans to validate system performance., • Support installation, commissioning, and startup at customer sites., • Troubleshoot and resolve issues during testing and startup phases. Continuous Improvement • Stay current on industry trends, emerging technologies, and automation best practices., • Identify opportunities for process improvements and implement solutions to enhance system performance and reliability. Qualifications Education • Bachelor’s degree in Electrical Engineering, Computer Science, or a related field. Experience • 3+ years of experience in control systems design, automation, or electrical engineering. Technical Skills • Strong PLC programming and control system design experience., • HMI design and programming expertise., • Familiarity with machine vision systems and supporting software., • Knowledge of industry standards and automation best practices. Soft Skills • Strong written and verbal communication skills., • Excellent problem-solving ability and attention to detail., • Ability to work independently and collaboratively., • Strong organizational and time-management skills.

Job Description Founded in 1954, Vibrant Ingredients is a leading provider of natural, clean label ingredients and systems that power extraordinary food and beverage experiences. The company’s broad portfolio — including natural flavors, botanical extracts, functional nutrition, cold brew coffee, tea essences, and food protection solutions — enhances taste, texture, color, shelf life, and performance across a wide range of applications. Vibrant operates four state-of-the-art facilities across the United States and works with leading brands, manufacturers, and foodservice operators. With vertically integrated capabilities and a proven track record of innovation and execution, Vibrant helps customers accelerate to market without compromise. About the role: We are a trusted partner to our customers when it comes to innovation and an industry leader in clean label ingredients, we are a true partner. We collaborate with our customers in ways that respect people and the environment. A commitment to Purely Better™ drives our innovation team to discover new, on trend solutions. As a Packaging Operator, you will be responsible for operating and monitoring packaging equipment to ensure the safe and efficient packaging of products. This position plays a critical role in ensuring that our products are properly packaged and meet the quality standards set by the company. How will you contribute: To perform this job successfully, an individual must be able to perform each essential duty satisfactorily. Reasonable accommodation may be made to enable qualified individuals with disabilities to perform essential job functions. Essential job functions and duties include, but are not limited to: • Operate and monitor packaging equipment including filling machines, labeling machines, and sealing machines, • Perform quality checks on packaged products to ensure they meet the company's standards, • Take corrective actions if any issues or deviations are identified during the packaging process, • Collaborate with the production team to ensure a smooth and efficient packaging process, • Maintain a clean and organized work area, adhering to all safety and hygiene regulations, • Complete production and packaging logs accurately and in a timely manner, • Assist with equipment setup, changeovers, and troubleshooting as needed, • High school diploma or equivalent, • Prior experience as a Packaging Operator or in a similar role is preferred, • Strong attention to detail and commitment to producing high-quality products, • Ability to follow instructions and work safely and efficiently, • Basic computer skills for data entry and equipment operation, • Good communication and team collaboration skills, • Generous time off for vacations, • Paid Holidays, • 401(k) with company match, • Tuition reimbursement, • Medical/Dental/Vision Vibrant Ingredients, headquartered in Lake Mary, FL, is one of the world's leading independent providers of natural ingredients. With a legacy spanning over 70 years, we deliver a diverse portfolio of clean label ingredients and innovative system solutions to the food and beverage industry. Our commitment to quality and performance is reflected in our American-made products, which enhance both taste and functionality. Backed by advanced manufacturing capabilities, we specialize in fermentation, patented cold brew extraction, custom flavor development, and a range of drying and blending technologies. Operating from four state-of-the-art facilities strategically located across the U.S., we ensure the accessibility of real, high-quality ingredients—helping our customers create better-for-you food and beverage for consumers. "Improving the food and beverages consumed by providing real ingredients from nature that work." This position is currently classified as on-site. Employees are eligible to participate in Medical, Dental, Vision, Life Insurance, 401(k), Holidays, Vacation, Tuition Reimbursement Program. The final salary offered for this position may take into account a number of factors including, but not limited to, location, skills, education, and experience. The Company reserves the right to modify, update, change and/or make corrections to this job description, at the sole discretion of senior management, at any time during the employee’s employment term, at the sole discretion of management. EEO Statement Vibrant Ingredients is an equal opportunity employer committed to employing a diverse workforce and providing accommodations for people with disabilities in all parts of the hiring process as required under its Employment Accommodation Policy. Vibrant Ingredients will work with applicants to meet accommodation needs that are made known to Vibrant Ingredients in advance. Please no external recruiters 1st Shift: 6a-2:30p 2nd Shift: (2p-10:30p)

Warehouse Distribution Operator needs 5-7 yrs of experience are required within a distribution warehouse environment Warehouse Distribution Operator requires: Experience working with an electronic warehouse management system (EWM) such as SAP Exacta and RF scanners. • 3-5 years experience operating a variety of Powered Industrial Trucks (Swing reach truck stand-up cherry picker Rider pallet jack and a Sit-down) The position will require the use of two or more of the different Power Industrial Equipment (PIT)., • Demonstrated accuracy and attention to detail, • Must be flexible and willing to be cross trained to perform multiple assignments., • Must be willing to work overtime with little to no notice., • Must be reliable and have a good work attendance history., • Basic computer skills with the capability to learn in more detail., • Demonstrated ability to work effectively in a team environment, • Must be willing to work a portion of the workday in a chilled environment (36-46F), • Standing lifting (up to 40 lbs.) and bending are required., • Shifts structure 24/7 schedule (3 work shifts 2 off shifts 2 work shifts 3 off shifts). 12hours shifts. 6.00pm/6.00am. Shift structure may vary depending on business needs. Key Skills General Services,Creative Designing,Bank Reconciliation,F&B,Animal Charity,Analytics Employment Type : Full Time Experience: years Vacancy: 1 Hourly Salary Salary: 27 - 28

Position Purpose Key Responsibilities • Follow all DOT (Department of Transportation) rules and maintain a clean driving record to make sure company vehicles are operated safely and responsibly., • Comply with all federal and state regulations regarding transportation of hazardous materials, • Inspect vehicles before and after trips to help ensure safe and on-time deliveries, • Load unload and organize orders carefully ensuring that all products are properly secured and hazardous material is separated appropriately., • Understand and adhere to FMCSA regulations, • Double-check purchase orders and delivery tickets to confirm routes and inventory helping reduce errors and improve customer satisfaction., • Support job site safety by checking for and reporting any potential hazards to help prevent accidents and protect people and property., • Take photos of all delivered products as required by company policy., • Keep accurate records of deliveries vehicle inspections and receipts. Direct Manager/Direct Reports Travel Requirements • The CDL Driver role requires local travel with deliveries commencing and concluding at the branch. Physical Requirements • Ability to lift and handle freight/materials up to 100 pounds throughout the workday., • The job involves consistent physical activity including bending crouching and prolonged seating and standing., • Must meet DOT medical certification standards to operate vehicles safely. Working Conditions • Work performed in a warehouse environment in conditions like noise hot or cold temperatures., • Driving in varied weather and traffic conditions., • Use of personal protective equipment (PPE) will be required. Minimum Qualifications • Valid Class A or B Commercial Drivers License (CDL), • HAZMAT Endorsement, • Current DOT Medical Certification, • Completion of FMCSA (Federal Motor Carrier Safety Administration) Registration, • Ability to continuously lift and handle freight/materials up to 100 pounds., • Must be 21 years old for transporting hazardous materials., • A clean driving record (no hit & runs and no DWI/DUI in the last 18 months), • Knowledge of FMCSA regulations and DOT compliance and OSHA safety regulations, • Basic computer skills to record deliveries and track inventory on a computer or tablet Preferred Qualifications • Air Brake endorsement, • Experience operating Manual or Automatic Transmission vehicles, • Valid and unexpired forklift certification, • Valid and unexpired certification to operate a Moffett (truck-mounted forklift), • Prior commercial driving experience Minimum Education • High school diploma or equivalent Preferred Education • None Minimum Experience • No prior experience required; however commercial driving experience and familiarity with DOT/OSHA safety regulations are a preferred. While there is no specified minimum year of commercial driving experience required having prior commercial driving experience and an understanding of DOT & OSHA safety regulations is considered advantageous for this role. Certifications. • Crane Operator License (CCOC), • Forklift Certification, • Moffett Certification Competencies • Safety First Mindset, • Dependability and Reliability, • Customer Service, • Time Management, • Teamwork and Communication, • Attention to Detail Job Location: Cinderella - Indianapolis 5150 Elmwood Ave Indianapolis IN 46203 As an Equal Employment Opportunity (EEO) employer SRS Distribution Inc. including all its subsidiaries provides job opportunities to qualified individuals without regard to actual or perceived race color creed religion national origin sex gender age disability gender identity sexual orientation citizenship status uniform service veteran status marital status genetic information physical or mental disability or any other characteristic in accordance with applicable federal state and local EEO laws. If you are an individual with a disability or a disabled veteran and require a reasonable accommodation in applying for any posted position please contact Human Resources at US: 855.556.3221 or by email to: with the nature of your accommodation request and include the Business name location and title of the job opening. Please allow one (1) business day for a reply. All employment offers are contingent upon successful completion of a background check and drug screen as permitted by law. Competitive weekly/bi-weekly pay discretionary bonuses 401(k) with company match Employee Stock Purchase Plan paid time off (vacation sick volunteer holidays birthday floating) medical/dental/vision flexible spending accounts company-paid life and short-term disability plus optional long-term disability and additional life insurance. Required Experience: IC Key Skills Inventory Control,Basic Math,Paratransit,Tanker Experience,Van Driver,Box Truck Experience,Commercial Driving,Commercial Vehicle Experience,Delivery Driver Experience,Manual Transmission Experience,Driving,Heavy Lifting Employment Type : Full-Time Experience: years Vacancy: 1

Position Purpose The CDL Driver - Hazmat is responsible for safely operating commercial vehicles to deliver products to customer locations or job sites, ensuring timely and accurate deliveries while following all DOT regulations.Our Drivers are essential partners in our success, delivering more than products—they deliver reliability, trust, and a great customer experience. Key Responsibilities • Follow all DOT (Department of Transportation) rules and maintain a clean driving record to make sure company vehicles are operated safely and responsibly., • Comply with all federal and state regulations regarding transportation of hazardous materials, • Inspect vehicles before and after trips to help ensure safe and on-time deliveries, • Load, unload, and organize orders carefully ensuring that all products are properly secured, and hazardous material is separated appropriately., • Understand and adhere to FMCSA regulations, • Double-check purchase orders and delivery tickets to confirm routes and inventory, helping reduce errors and improve customer satisfaction., • Support job site safety by checking for and reporting any potential hazards, to help prevent accidents and protect people and property., • Take photos of all delivered products as required by company policy., • Keep accurate records of deliveries, vehicle inspections, and receipts. Direct Manager/Direct Reports Travel Requirements • The CDL Driver role requires local travel, with deliveries commencing and concluding at the branch. Physical Requirements • Ability to lift and handle freight/materials up to 100 pounds throughout the workday., • The job involves consistent physical activity, including bending, crouching, and prolonged seating and standing., • Must meet DOT medical certification standards to operate vehicles safely. Working Conditions • Work performed in a warehouse environment in conditions like noise, hot or cold temperatures., • Driving in varied weather and traffic conditions., • Use of personal protective equipment (PPE) will be required. Minimum Qualifications • Valid Class A or B Commercial Driver’s License (CDL), • HAZMAT Endorsement, • Current DOT Medical Certification, • Completion of FMCSA (Federal Motor Carrier Safety Administration) Registration, • Ability to continuously lift and handle freight/materials up to 100 pounds., • Must be 21 years old for transporting hazardous materials., • A clean driving record (no hit & runs and no DWI/DUI in the last 18 months), • Knowledge of FMCSA regulations and DOT compliance and OSHA safety regulations, • Basic computer skills to record deliveries and track inventory on a computer or tablet Preferred Qualifications • Air Brake endorsement, • Experience operating Manual or Automatic Transmission vehicles, • Valid and unexpired forklift certification, • Valid and unexpired certification to operate a Moffett (truck-mounted forklift), • Prior commercial driving experience Minimum Education • High school diploma or equivalent Preferred Education • None Minimum Experience • No prior experience required; however, commercial driving experience and familiarity with DOT/OSHA safety regulations are a preferred. While there is no specified minimum year of commercial driving experience required, having prior commercial driving experience and an understanding of DOT & OSHA safety regulations is considered advantageous for this role. Certifications. • Crane Operator License (CCOC), • Forklift Certification, • Moffett Certification Competencies • Safety First Mindset, • Dependability and Reliability, • Customer Service, • Time Management, • Teamwork and Communication, • Attention to Detail Job Location: Cinderella - Indianapolis 5150 Elmwood Ave Indianapolis, IN 46203 As an Equal Employment Opportunity (EEO) employer SRS Distribution Inc., including all its subsidiaries, provides job opportunities to qualified individuals without regard to actual or perceived race, color, creed, religion, national origin, sex, gender, age, disability, gender identity, sexual orientation, citizenship status, uniform service, veteran status, marital status, genetic information, physical or mental disability, or any other characteristic in accordance with applicable federal, state, and local EEO laws.\n\nIf you are an individual with a disability or a disabled veteran and require a reasonable accommodation in applying for any posted position, please contact Human Resources at US: 855.556.3221, or by email to: with the nature of your accommodation request and include the Business name, location and title of the job opening. Please allow one (1) business day for a reply.\n\nAll employment offers are contingent upon successful completion of a background check and drug screen, as permitted by law. Competitive weekly/bi-weekly pay, discretionary bonuses, 401(k) with company match, Employee Stock Purchase Plan, paid time off (vacation, sick, volunteer, holidays, birthday, floating), medical/dental/vision, flexible spending accounts, company-paid life and short-term disability, plus optional long-term disability, and additional life insurance. \n Benefits\n \n \n \n \n \n • Competitive salaries for all team members paid weekly\n, • 401(k) Retirement Plan with company matching\n, • Employee Stock Purchase Program\n, • Paid Vacation, Sick Time, Volunteer Day, Holidays, Birthday, and Floating Holidays\n, • Paid Parental Leave, Adoption Assistance Program\n, • Medical, Dental and Vision Benefits\n, • Flexible and Dependent Care Spending Accounts\n, • Company paid Life insurance and Short-Term Disability\n, • Additional Life Insurance and Long-Term Disability also offered\n, • Mental, Physical and Emotional Well-Being Programs for Employees and Families\n, • Wellness Program and Safety Program with Bonuses for our Drivers\n, • Employee Referral Bonus Program\n \n \n \n \n

Job Description Heartland Food Products Group is a global leader in the consumer packaged goods (CPG) industry, producing low-calorie sweeteners, coffee, coffee creamers and liquid water enhancers. We manufacture and market Splenda, the #1 brand in the low calorie sweetener category and the most recognized in the world. We make coffee, tea and water taste better and help people live happier, healthier and longer lives by making it easy to reduce sugar. We offer an excellent compensation and benefits package. Come grow with us! Scope: The Sanitation Operator will perform and oversee a variety of facility and equipment sanitizations. Work requires independent initiative, knowledge of good manufacturing practices, and experience in working with cleaning chemicals. They will establish proficiency in one of the four production departments with cleaning skills in accordance with daily MSS (Master Sanitation Schedule) and display proficiencies relating to Standard Operating Procedures in assigned department. They will ensure that safety, quality, production and cost KPI’s are achieved. Essential Duties and Key Responsibilities: • Perform detailed sanitization of production machinery and the facility, • Oversee proper machinery break down, wash, sanitize, and machinery put together, • Ensure proper use and maintenance of floor scrubber, steam cleaner, and sanitation supplies, • Performs according to OSHA and Heartland Sweetener Quality Control program safety procedures, • Maintain proper PPE usage, • Performs related duties as required, • All other duties as assigned Qualifications: • Knowledge of food safety and food security guidelines including good manufacturing practices and Hazard Analysis Critical Control Points, • Knowledge of cleaning solutions, • Thorough knowledge of the cleaning and sanitation methods and equipment used, • Computer literate, • Keep and maintain various records, • Ability to diagnose problems, plan and organize appropriate corrective action, • Ability to exercise independent initiative, • Ability to establish and maintain effective working relationships with coworkers, supervisors, and other company employees, • Ability to understand and follow MSDS sheets and chemical labels, • Demonstrate a very high sense of urgency, • Must have ability to understand oral and written instructions in English, • Must have good job performance and attendance records, • Ability to work in a fast-paced environment & handle multiple tasks Physical Demands: • Must be able to physically perform the functions of climbing, balancing, stooping, kneeling, crouching, reaching, standing, walking, pushing, pulling, lifting, grasping, feeling, talking, hearing, and repetitive motions, • Must be able to work extended hours, such as daily overtime and an occasional weekend, • Must possess visual acuity to document company records, • Lifting up to 40 pounds

Job DescriptionDescription: SUMMARY Supports our production operations by ensuring the optimal performance of manufacturing equipment. In this hands-on role, you will be responsible for performing preventative maintenance, troubleshooting mechanical and electrical issues, and repairing production machinery to minimize downtime and maximize efficiency. The ideal candidate has a strong background in industrial maintenance, a proactive approach to problem-solving, and a commitment to workplace safety and continuous improvement. ESSENTIAL FUNCTIONS • Responsible for maintaining company-owned machinery and equipment in proper working order, • On-call emergency repairs, • Responsible for taking control of breakdowns, • Execute a plan of continued improvement of machine safety and general housekeeping, • Work with crews to complete all preventative maintenance, • Work with machine operator to troubleshoot and determine root cause of mechanical issues, • Respond quickly to maintenance requests and prioritize effectively, • Work hand in hand with Maintenance Manager to resolve any accident waiting to happen forms, • Work as a team to maintain organization and inventory of maintenance shop and tools Education: High School Diploma or Equivalent required Experience Electrical certification preferred** Corrugated packaging industry a plus** Strong knowledge of mechanical machinery Ability to use shop tools and equipment, drill press, shop grinders, welders, oxy-acetylene torch A good understanding of hydraulic and pneumatic systems A strong trouble shooting and problem solving ability with practical, mechanical & electrical aptitude Must be able to read and interpret both electrical and mechanical drawings Must be fully computer literate with Microsoft environment SPECIFIC KNOWLEDGE, SKILLS, OR ABILITIES • Strong written and oral communication., • Organization and attention to detail., • Analytical and problem-solving skills., • Time management., • Systems analysis., • Mathematical and deductive reasoning., • Critical thinking. The physical demands described here are representative of those that must be met by an employee to successfully perform the functions of this job with or without reasonable accommodation. The work environment characteristics described here are representative of those an employee encounters while performing the functions of this job. Physical Requirements: While performing the duties of this job, the employee may be regularly required to stand, sit, talk, hear, reach, stoop, kneel, and use hands and fingers to perform maintenance on machinery Ability to lift up to 50 pounds on a regular consistent basis. Must be able to wear personal protective equipment. Work Environment: Exposure to moving mechanical parts. Wet and or humid conditions Office Setting, sitting for long periods of time. Occasionally exposed to high, precarious places, fumes or airborne particles and vibration. Noise level in the work environment is usually loud. Disclaimer: This list does not represent all physical demands. Descriptions are representative of those that must be met by employee to successfully perform the essential functions of the job. Reasonable accommodation may be provided to enable individuals with disabilities to perform the jobs’ essential functions. Welch Packaging is proud to be an equal opportunity workplace. Qualified applicants will receive consideration for employment without regard to race, color, religion, sex, national origin, sexual orientation, gender identity, disability, or protected veteran. Requirements:

Job Description The State Comptrollers Office is seeking a detail-oriented and technically skilled Computer Operator to run and monitor jobs in the PeopleSoft Financials system, print critical documents, and utilize and maintain mailing equipment. This position plays a critical role in ensuring the smooth execution of production schedules and system performance in a structured, high-availability environment. This role requires a team player who is punctual, reliable, customer-service focused, and driven to meet high expectations. The anticipated schedule is Monday through Friday, 8:00 AM to 4:00 PM. While this role is not on-call, occasional flexibility may be required to extend working hours in support of large projects or to address system performance issues, typically within the scope of regular business operations. Essential Job Responsibilities: Schedule, run and monitor jobs in the PeopleSoft Financials system, following documented processes precisely. Print and process critical financial documents Monitor system outputs and error messages; troubleshoot and resolve issues. Operate and perform routine maintenance on printing and mailing equipment (e.g., printers, folders/sealers, inserters). Contribute to a positive, team-oriented environment focused on accuracy and efficiency. Requirements: High school diploma or equivalent. Must be able to lift up to 50 lbs. 1 year of experience operating or maintaining mailing equipment (minimum); 23 years preferred 1 year of experience with job scheduling and monitoring (minimum); 23 years preferred Intermediate proficiency in office productivity software, including Microsoft Office Suite (Word, Excel, Outlook, SharePoint), with the ability to create, edit, and manage documents, spreadsheets, and collaborative content effectively. Strong adherence to documented processes and operational guidelines. Ability to work effectively as part of a team to support shared goals Strong attention to detail and time management skills. Punctuality, reliability, and a strong sense of integrity and accountability are highly valued.

Job Description Overview Tradesmen International is immediately hiring skilled CNC Operators for projects located in Indianapolis, IN. This is a first shift opportunity and the pay rate is up to $35/hour based on experience and skill level. If you are a CNC Operator eager to master your skills while working alongside our accomplished Craft Professionals, this is your chance to advance your career! Job Scope: • Set up, operate and maintain computer numerical control machines to produce precision parts, • Reading technical drawings, • Loading raw materials, • Calibrating machinery, • Monitoring operations, • Inspecting finished products for quality and adherence to specifications Qualifications Tradesmen International not only offers consistent work, top pay, and employment opportunities, we also provide a benefits package that is among the best in the industry. Our comprehensive benefits include: • Tradesmen+ Rewards Program – earn points for hours worked, • Vacation Pay, • Health insurance Tradesmen International is an EO employer - M/F/Veteran/Disability Click here to visit Tradesmen’s full website.

Job DescriptionDescription: Job Summary Front Desk Agents are responsible for greeting and registering the guest, providing outstanding guest service during their stay, and settling the guest’s account upon completion of their stay. Primary responsibilities include registering guests, making and modifying reservations, hotel operator, and concierge duties. Providing attentive, courteous and efficient service to all guests prior to arrival and throughout their stay, while maximizing room revenue and occupancy. Education & Experience • High School diploma or equivalent required; College course work in related field helpful., • Experience in a hotel or a related field preferred., • Possess a positive and upbeat personality with a desire to deliver outstanding customer service to our guests., • Demonstrate the ability to multi-task, be detail-oriented, and be able to problem solve in order to effectively deal with internal and external customers., • Must be able to convey information and ideas clearly., • Must be able to evaluate and select among alternative courses of action quickly and accurately., • Must work well in stressful, high-pressure situations., • Must be effective in handling problems in the workplace, including anticipating, preventing, identifying and solving problems as necessary., • Must be effective at listening to, understanding, and clarifying the issues raised by co-workers and guests., • Must be able to work with and understand financial information and data, and basic arithmetic functions., • Ability to perform numerical operations using basic counting, adding, subtracting, multiplying and dividing, • Ability to read, comprehend and write simple instructions and/or short correspondence and memos, • Ability to use logic to define the problem, collect information, establish facts, draw valid conclusions, interpret information and deal with abstract variables for unique or unfamiliar situations, • An operational knowledge of Microsoft Office suite, • Must be willing and have the ability to work a varied schedule that may include evenings, nights, weekends and holidays, • Holds an understanding of hotel products and guest services (i.e. lifestyle, full service, resort, etc), • • Ability to participate in the creation of an enjoyable work environment Requirements: Job Duties & Functions • Approach all encounters with guests and associates in a friendly, service-oriented manner., • Maintain high standards of personal appearance and grooming, which include wearing the proper uniform and name tag when working (per brand standards)., • Maintain regular attendance in compliance with Avion Hospitality standards, as required by scheduling which will vary according to the needs of the hotel., • Comply at all times with Avion Hospitality policies, standards and regulations to encourage safe and efficient hotel operations., • Greet and welcome all guests approaching the Front Desk in accordance with Avion Hospitality standards; maintain a friendly and warm demeanor at all times., • Maintain proper operation of the telephone switchboard and ensure that all Avion Hospitality performance standards are met., • Handle requests for information, mail and messages in an efficient and courteous manner., • Answer guest inquires about hotel service, facilities and hours of operation., • Answer inquiries from guests regarding restaurants, transportation, entertainment, etc., • Establish and maintain good communications and team work with fellow associates and other departments within the hotel., • Be aware of all rates, packages and special promotions; Be familiar with all in house groups; Be aware of closed out and restricted dates., • Obtain all necessary information when taking room reservations and follow rate quoting scenario., • Be familiar with all Avion Hospitality policies and house rules as well as hospitality terminology., • Have knowledge of and assist in emergency procedures as required., • Handle check-ins and check-outs in a friendly, efficient and courteous manner., • Fully comprehend and be able to operate all relevant aspects of the Front Desk computer system., • Ensure logging and delivery of packages, mail and messages as needed to guests and meeting rooms., • Use proper two-way radio etiquette at all times when communicating with other associates., • As needed, deliver guest items such as luggage, newspapers, messages, packages, amenities, or other items requested by guests or team members, • Maintain an up to date working knowledge of all property amenities as well as any special events, local area attractions and things to do around the hotel., • Perform other duties as assigned, which may include, but is not limited to the following: helping coworkers in other areas of the hotel, maintaining a clean and organized work area and overall cleanliness and safety throughout the hotel and grounds

Job Description Are you looking for a company you can grow your career with and advance in? Are you goal oriented, self-motivated & proactive by nature? Do you have a passion for health and wellness and love sales? If you have the drive, desire, and initiative to work with a world-class organization, we want to talk to you.At The Joint Chiropractic we provide world class service to every one of our patients, and we would like for you to join our caring team. Let us turn that passion for health and wellness and love of helping people, into a rewarding career. We have continued to advance the quality and availability of Chiropractic care in the Wellness industry. Schedule: Part time - includes some weekdays and weekends Pay: $15 - $17/hr Bonus Potential What we are looking for in YOU and YOUR skillset! • Driven to climb the company ladder!, • Possess a winning attitude!, • Have a high school diploma or equivalent (GED)., • Complete transactions using point of sale software and ensure all patient accounts are current and accurate, • Have strong phone and computer skills., • Have at least one year of previous Sales Experience., • Participate in marketing/sales opportunities to help attract new patients into our clinics, • Be able to prioritize and perform multiple tasks., • Educate Patients on wellness offerings and services, • Share personal Chiropractic experience and stories, • Work cohesively with others in a fun and fast-paced environment., • Have a strong customer service orientation and be able to communicate effectively with members and patients., • Manage the flow of patients through the clinic in an organized mannerEssential Responsibilities, • Providing excellent services to members and patients., • The Wellness Coordinators primary responsibility is to gain memberships in order to meet sales goals., • Greeting members and patients upon arrival. Checking members and patients in to see the Chiropractor., • Answering phone calls., • Re-engaging inactive members., • Staying updated on membership options, packages and promotions., • Recognizing and supporting team goals and creating and maintaining positive relationships with team members., • Maintain the cleanliness of the clinic and organization of workspace, • Confident in presenting and selling memberships and visit packages, • Keeping management apprised of member concerns and following manager's policies, procedures and direction., • Willingness to learn and grow, • Accepting constructive criticism in a positive manner and using it as a learning tool., • Office management or marketing experience a plus!, • Able to stand and/or sit for long periods of time, • Able to lift up to 50 pounds, • Upholding The Joint Chiropractic's core values of TRUST, INTEGRITY, EXCELLENCE, RESPECT and ACCOUNTABILITY About The Joint Chiropractic The Joint Corp. revolutionized access to chiropractic care when it introduced its retail healthcare business model in 2010. Today, it is the nation’s largest operator, manager and franchisor of chiropractic clinics through The Joint Chiropractic network. The company is making quality care convenient and affordable, while eliminating the need for insurance, for millions of patients seeking pain relief and ongoing wellness. With more than 700 locations nationwide and nearly 11 million patient visits annually, The Joint Chiropractic is a key leader in the chiropractic industry. Ranked number one on Forbes’ 2022 America's Best Small Companies list, number three on Fortune’s 100 Fastest-Growing Companies list and consistently named to Franchise Times “Top 400+ Franchises” and Entrepreneur’s “Franchise 500®” lists, The Joint Chiropractic is an innovative force, where healthcare meets retail. For more information, visit . Business Structure The Joint Corp. is a franchisor of clinics and an operator of clinics in certain states. In Arkansas, California, Colorado, District of Columbia, Florida, Illinois, Kansas, Kentucky, Maryland, Michigan, Minnesota, New Jersey, New York, North Carolina, Oregon, Pennsylvania, Rhode Island, South Dakota, Tennessee, Washington, West Virginia and Wyoming, The Joint Corp. and its franchisees provide management services to affiliated professional chiropractic practices. You are applying to work with a franchisee of The Joint Corp. If hired, the franchisee will be your only employer. Franchisees are independent business owners who set own terms of employment, including wage and benefit programs, which can vary between franchisees. Powered by JazzHR G25MuLZE8I

Job Description The Assembly Operator assembles Piezo transducer sub-assemblies and units, under well-defined instructions and in accordance with company policy and safety procedures. JOB DUTIES & RESPONSIBILITIES • Perform a range of routine mechanical and or electromechanical assembly of small parts or components in accordance with company instructions and procedures., • Review shop traveler route card, or uncomplicated schematic drawings to confirm sequence of operations., • Position very small parts such as fine pins, wires, solder particles and epoxy using tweezers or positioning fixtures, • Mix epoxies according to company formulas, • Bond or seals parts or assemblies with epoxies using direct heating elements or ovens and performs a variety of in-process testing, • Adjusts, bends, aligns and solders fine wires to base parts, • Ability to record test data into computer. Experience/Background • 1-2 years of relevant production assembly experience in a Manufacturing or industrial setting preferred, • Soldering experience preferred, • Manual dexterity required for operating equipment, computers and small parts, • Ability to read and interpret basic company documents, such as safety rules, operating/manufacturing instructions, policies and procedures, • Self-directed work ethic, • Quality-minded, • Detail oriented, • Basic math proficiency, • Able to problem-solve using existing procedures to perform straightforward tasks Manufacturing / Non-Sedentary Requirements Incumbent must be able to perform the essential functions of the job. Work may be performed in an office or warehouse environment. Typically requires the ability to spend 66%+ hours each work day doing the following activities: stand for extended periods of time, walk, bend, stoop, or climb. May have possible exposure to dust, and may require the ability to lift and/or push up to 50 pounds 33% - 66% of the time. ADDITIONAL INFORMATION REGARDING JOB DUTIES AND JOB DESCRIPTIONS Job duties include additional responsibilities as assigned by one's supervisor or another manager related to the position/department. This job description is meant to describe the general nature and level of work being performed; it is not intended to be construed as an exhaustive list of all responsibilities, duties and skills required for the position. Amphenol reserves the right at any time with or without notice to alter or change job responsibilities, reassign or transfer job position or assign additional job responsibilities, subject to applicable law. Amphenol shall provide reasonable accommodations of known disabilities to enable a qualified applicant or employee to apply for employment, perform the essential functions of the job, or enjoy the benefits and privileges of employment as required by the law. Powered by ExactHire:192400

Job DescriptionSalary: 18-19.50 Company Description Contour Hardening, established in 1986, specializes in providing innovative, cost-effective heat treatment solutions. Known for its patented Micropulse Process, Contour excels in advanced computer-controlled induction heating technologies for hardening complex components like gears and crankshafts. With expertise in thermal processing and a team of skilled engineers and metallurgists, Contour develops custom induction hardening solutions. The companys commitment to engineering ingenuity ensures that it can design and build customized equipment to meet unique customer needs. Contour is a trusted partner for thermal processing services across various industries. Qualifications High school diploma or GED Experience in production or manufacturing environment (Preferred) Prior experience in a lead, senior operator, or supervisory role Knowledge of production processes, safety standards, and quality control Job Summary The Shipping and Receiving Clerk at Contour Hardening, Inc. is responsible for managing incoming and outgoing shipments while maintaining accurate shipping and receiving records; This role supports warehouse operations by verifying, documenting, and distributing materials in a timely and efficient manner. and preparing product to be returned to vendors or delivered to customers as needed. The shift for this position is Monday-Friday 3:00PM-11:30PM with possible overtime opportunity. Starting Rate $18.00-$19.50/Hour Key Responsibilities • Lead and oversee production team members during assigned shifts, • Ensure production targets are met while maintaining quality and safety standards, • Assign tasks, monitor workflow, and adjust staffing as needed, • Train, coach, and support employees on equipment, processes, and procedures, • Enforce safety rules and company policies consistently, • Conduct station audits for matching quantities, • Communicate production goals, issues, and results to supervisors and managers, • Assist with troubleshooting equipment or process issues, • Strong Leadership and team coordination skills, • Effective communication and problem-solving abilities, • Ability to work in a fast-paced, hands-on environment, • Basic computer skills for reporting and tracking production data, • Attention to detail and commitment to safety and quality Physical Requirements • Ability to lift, push, maneuver 50 lbs. as required, • Comfortable working in warehouse environments (may include varying temperatures), • Willingness to work overtime or weekends as needed