Control technician jobs in Houston, TexasCreate job alerts

Staples is business to business. You’re what binds us together. When joining our Supply Chain team, you can feel right away that people are at the heart of what we do. You’ll be surrounded by a team who is looking to make an impact on our customers, our community, and each other. By pairing innovative technology with dynamic employees, we create smarter, more efficient ways to deliver for customers. Our network of distribution, fulfillment, fleet, furniture installation and professional teams work together in fun and safe environments to deliver state-of-the-art products, services and expertise to our customers. What you’ll be doing: As a Maintenance Technician 3 you will perform preventative and on-demand maintenance on electrical motors, material handling equipment, propane torches, man-lift, hand tools, power tools, welding equipment, grinders, electrical test equipment and ladders as well as lift equipment jacks, chargers, and batteries. In addition, you will perform general building and conveyor maintenance, light plumbing, carpentry, painting and other assignments as needed. You will assist and relay directions from supervisor to other technicians and assistants. In this role, you will utilize your strong technical and working knowledge of electrical, HVAC, energy management, hydraulics, material handling equipment, and conveyor systems to keep the Fulfillment Center running smoothly through all shifts. Safety is our utmost priority so, in this role, we will look to you to ensure safe work practices and embrace our safety culture. In this role you will be essential to the success of Staples Supply Chain as we deliver to our customers. What you bring to the table: • A mechanical aptitude, knowledge of hydraulics, electrical, pneumatics, ability to read blueprints/schematics including electrical schematics and troubleshoot complex automated electrical control systems, • An ability to troubleshoot electrical/electronic challenges to repair motor control and lighting systems and work with high voltages (up to 480VAC) as well as low voltage DC electrical systems, • An ability to use vendor manuals and procedures to perform preventative maintenance and troubleshooting tasks, • An ability to be trained and MHE certified to operate power material handling equipment, i.e. Forklift, Electric Pallet Jack, etc., • An inclusive approach with your colleagues and customers to forge strong relationships and foster collaboration to resolve issues, • An ability to demonstrate analytical thinking and problem-solving, • An ability to adopt our safety procedures quickly and ensure safe work practices, • An ability to be comfortable working in a warehouse environment with seasonal temperature variations Qualifications: What’s needed- Basic Qualifications • A high school diploma or general education degree (GED), • Minimum two (2) years of related experience, • Ability to pass a drug screen to the extent permissible legally, • Basic English language skills (both verbal and written), • As a Full-Time associate, you must have the ability to work additional hours beyond scheduled shift; additional overtime hours will be required based on business need, • Ability to work at heights up to 60 feet or more as needed, • An ability to lift, push or pull boxes/merchandise weighing between 70 pounds and 100 pounds by hand, • Trade school background We Offer: • Competitive Pay: $30.14-$41.44/hour Based on Experience, • Inclusive culture with associate-led Business Resource Groups and resources such as the Social Justice Resource Center, • Full-Time Paid Time Off: 112 Hours and Holiday Schedule (7 observed paid holidays + 1 floating holiday), Online and Retail Discounts, Company Match 401(k), Physical and Mental Health Wellness programs, and more! The physical demands described are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. At Staples, “inclusion” is an action word. It represents what we do to ensure that all employees feel valued and supported to contribute to their fullest potential. When we operate inclusively, diversity naturally follows. This is why we work hard to foster an inclusive culture, as we seek employees with unique and varied perspectives and areas of expertise. The result is a better workplace and innovative thinking that helps us exceed our customers’ expectations – through the power of the people behind our iconic brand. Staples is an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, age, sex, sexual orientation, gender identity, national origin, protected veteran status, disability, or any other basis protected by federal, state, or local law.

Description Introduction Do you have the career opportunities as a(an) Registered Respiratory Therapist you want with your current employer? We have an exciting opportunity for you to join Texas Orthopedic Hospital which is part of the nation's leading provider of healthcare services, HCA Healthcare. Benefits Texas Orthopedic Hospital, offers a total rewards package that supports the health, life, career and retirement of our colleagues. The available plans and programs include: • Comprehensive medical coverage that covers many common services at no cost or for a low copay. Plans include prescription drug and behavioral health coverage as well as free telemedicine services and free AirMed medical transportation., • Additional options for dental and vision benefits, life and disability coverage, flexible spending accounts, supplemental health protection plans (accident, critical illness, hospital indemnity), auto and home insurance, identity theft protection, legal counseling, long-term care coverage, moving assistance, pet insurance and more., • Free counseling services and resources for emotional, physical and financial wellbeing, • 401(k) Plan with a 100% match on 3% to 9% of pay (based on years of service), • Employee Stock Purchase Plan with 10% off HCA Healthcare stock, • Family support through fertility and family building benefits with Progyny and adoption assistance., • Referral services for child, elder and pet care, home and auto repair, event planning and more, • Consumer discounts through Abenity and Consumer Discounts, • Retirement readiness, rollover assistance services and preferred banking partnerships, • Education assistance (tuition, student loan, certification support, dependent scholarships), • Colleague recognition program, • Time Away From Work Program (paid time off, paid family leave, long- and short-term disability coverage and leaves of absence), • Employee Health Assistance Fund that offers free employee-only coverage to full-time and part-time colleagues based on income. Note: Eligibility for benefits may vary by location. Our teams are a committed, caring group of colleagues. Do you want to work as a(an) Registered Respiratory Therapist where your passion for creating positive patient interactions is valued? If you are dedicated to caring for the well-being of others, this could be your next opportunity. We want your knowledge and expertise! Job Summary and Qualifications Under the general supervision of the Respiratory Therapy Supervisor, the Respiratory Therapist provides cardiopulmonary services to patients in accordance with accepted respiratory therapy practices and established Departmental and Hospital standards of care. Collaborates with the Director of Laboratory for technical supervision of the I-Stat machine. What you will do in this role: • Participates in quality control and performance improvement activities within the Department., • Maintains high degree of competency in the operation of all equipment in the Department to include trouble-shooting and minor repair., • Assists with the provision of all respiratory services in the department., • Facilitates communication between the Respiratory Therapy and members of the Medical Staff and other Hospital Departments to enhance patient care services., • Performs other related duties as assigned by the appropriate leadership., • Utilizes specialized knowledge of cardiopulmonary principles in the provision of critical care services., • Utilizes specialized knowledge of cardiopulmonary procedures in performing diagnostic studies., • Utilizes specialized knowledge of respiratory procedures in performing general therapy., • Utilizes specialized knowledge of respiratory principles in performing general duties., • Bases decision-making on sound principles related to quality of care in the Department., • Demonstrates knowledge and skills necessary to provide cardiopulmonary services to patients served in relation to growth and development over the life span to identify their requirements relative to population-specific needs., • Utilizes appropriate principles in the provision of direct patient care services., • Communicates effectively with patients, physicians, personnel, and other personnel in the hospital to fulfill position responsibilities., • Prioritizes activities of self and others based on demands for service with ability to perform staffing and coordination of duties when assigned as Shift Supervisor., • Maintains awareness of current developments and trends in the provision of patient care services in the Respiratory Therapy., • Maintains awareness of current hospital and departmental operational policies and procedures which impact on position responsibilities., • Facilitates the development of personnel in the Respiratory Therapy and other hospital departments through the provision of inservice programs related to respiratory therapy., • Alert to the detection of errors in own work with appropriate corrective actions initiated., • Actively seeks ways to control costs without compromising patient safety, quality of care or the services delivered., • Demonstrates knowledge of the occurrence reporting system. Uses system to report potential patient safety issues. What qualifications you will need: • Previous experience in provision of hospital respiratory care services preferred., • Certificate must be obtained within 30 days of employment start date, • Licensed Certified Respiratory Therapist (LCRT), or Licensed Respiratory Therapist, or RRT/Respiratory Care Practitioner (RRT / RCP), or State Registered Respiratory Therapist, or Certified Respiratory Therapy Technician (CRTT) must be obtained within 30 days of employment start date, • PALS Pediatric Adv Life Supt, or PALS Instructor must be obtained within 30 days of employment start date, • Basic Cardiac Life Support, or BCLS Instructor must be obtained within 30 days of employment start date, • Advanced Cardiac Life Spt, or ACLS Instructor must be obtained within 30 days of employment start date No Travel Required Opened in 1995, ___ was developed to provide high-quality, cost-effective, specialized orthopedic care in a streamlined environment focused on wellness, mobility and quick recovery. As one of the only specialty hospitals in the country focusing solely on orthopedics, Texas Orthopedic Hospital is pleased to offer all services conveniently located within one building. Texas Orthopedic Hospital is partially physician-owned and partners with Fondren Orthopedic Group, L.L.P., the largest and most comprehensive association of private orthopedic surgeons in the Houston area and one of the largest in the nation. Our physicians are internationally renowned and as a result, patients at Texas Orthopedic Hospital receive precise diagnoses and the very latest in treatment options. Texas Orthopedic Hospital is affiliated with HCA Houston Healthcare, the most comprehensive family of hospitals in the region and part of the leading provider of healthcare in the country, HCA Healthcare. HCA Healthcare has been recognized as one of the World’s Most Ethical Companies® by the Ethisphere Institute more than ten times. In recent years, HCA Healthcare spent an estimated $3.7 billion in cost for the delivery of charitable care, uninsured discounts, and other uncompensated expenses. "Bricks and mortar do not make a hospital. People do."- Dr. Thomas Frist, Sr. HCA Healthcare Co-Founder If you are looking for an opportunity that provides satisfaction and personal growth, we encourage you to apply for our Registered Respiratory Therapist opening. We promptly review all applications. Highly qualified candidates will be contacted for interviews. Unlock the possibilities and apply today! We are an equal opportunity employer. We do not discriminate on the basis of race, religion, color, national origin, gender, sexual orientation, age, marital status, veteran status, or disability status.

Job DescriptionDescription: Are you interested in a career in the fun, exciting, yet stable field of civil engineering? BinkleyBarfield | DCCM takes pride in our exceptional staff and considers our team critical to the company’s success. Providing professionals with the tools and training they need to achieve excellence in their careers is key to employee engagement and productivity. Our goal is to foster a work environment that attracts top talent, inspires innovation, and renders excellence in service to our clients. Our subsurface utility engineering (SUE) group has a need for a Designator to join their team. In this role you will be the onsite Designator for SUE project work. You will find and mark subsurface utilities with a high degree of proficiency. You understand the big picture of finding, documenting, and mapping utilities to enhance the design phase of projects and protect the public. What you will do: • Use, obtain and interpret control point records and locate in the field, • Identify and document utility types and ownership, • Set up Traffic Signs and basic traffic control, • Complete daily paperwork and record keeping, • Perform simple mathematics, • Conduct on-site safety meetings, • Maintenance and up-keep of vehicle, work sites, and equipment, • Coordinates and supports survey activities in connection with SUE work, • Selects and applies appropriate geophysical equipment to accurately designate non-complex underground utility layouts You possess above average computer literacy and technical capabilities. You are an excellent problem solver who uses knowledge and experience to apply to everyday and unusual situations as they arise. You are accomplished at oral and written communication with exceptional listening and comprehension skills. What you bring: • High School Diploma or GED required., • 5-7 years’ experience as a SUE Technician / Designator or a (related) Bachelor s Degree plus 2 years minimum as a SUE Field Tech II, • Field survey experience preferred, • Familiarity with TxDOT SUE/Survey standards preferred, • Driving Record that meets company requirements., • Able to use multi-frequency pipe and cable locators (RD, V-Loc, Metrotech etc), ground penetrating radar, sondes, rodders, and other geophysical equipment., • Basic comprehension and interpretation of utility design plans and record drawings, • Ability to communicate effectively, both orally and in writing., • Ability to work effectively with co-workers and the public., • Ability to operate a computer with Microsoft – Word & Excel, Outlook Email, Google Earth KMZ Files. and other related programs and applications necessary for successful job performance., • Skills in the use of specialty tools and equipment., • A strong work ethic and a willingness to complete tasks in the field despite the difficulties caused by the weather. The things about us you will appreciate! Our comprehensive benefit package includes the following: • Three medical plan options (2 PPOs and a HDHP), • Dental & vision plans, • Company-paid group life, short and long-term disability insurance, • Voluntary Life Insurance, • Flexible and Dependent care spending accounts, • Additional Supplemental plans (Critical Illness, Hospital Indemnity, Accident), • 401(k) with company match, • Paid Time Off (PTO) which starts accruing upon hire, • 10 Paid Holidays #LI-MR1 Requirements:

Integrated Healthcare Services is seeking a travel Pharmacy Technician for a travel job in Houston, Texas. Job Description & Requirements • Specialty: Pharmacy Technician, • Discipline: Allied Health Professional, • Duration: 13 weeks, • 40 hours per week, • Shift: 8 hours, days, • Employment Type: Travel To assist the pharmacist in the preparation, perform activities related to the repackaging and compounding, filling, and delivery of medications, and other tasks associated with dispensing in a manner developmentally appropriate for the ages of patients served (0-adult). Controlled Substances: Assists in the procurement, record keeping, storage, and distribution of all controlled substances. • Demonstrates competence at batch/medication/prescription order entry. o Registered Pharmacy Technician o IV sterile compounding certification preferred, but not required o 3pm – 11:30pm • Knowledge of current hospital and departmental standards for the handling of pharmaceuticals. Required- RPHT-TX - Reg Pharmacy Technician - TX State Board of Pharmacy Or PHAR INT - Pharmacy Intern State Board of Pharmacy Preferred- CPHT - Cert-Pharm. TECH Certification Pharmacy Technician Certification Board o Registered pharmacy technician with Texas State Board of Pharmacy o IV sterile compounding preferred, but not required QUALIFICATION/LICENSURE Work Authorization : US Citizen Preferred years of experience : 2 years Travel required : No travel required Shift timings : Days Integrated Healthcare Services Job ID #36680424. Pay package is based on 8 hour shifts and 40 hours per week (subject to confirmation) with tax-free stipend amount to be determined. Posted job title: Pharmacy Technician

Securitas Technology Corporation, part of Securitas, is a world-leading provider of integrated security solutions that protect, connect, and optimize businesses of all types and sizes. More than 13,000 colleagues in 40 countries are focused daily on our purpose to help make your world a safer place and our commitment to deliver an unparalleled client experience. With clients at the heart of all we do, our people, knowledge, and technology power our connected ecosystem of health, safety and security solutions and services. We currently have an Embedded Installation Technician opening for team-oriented individuals possessing vocational training in electronics or electromechanical engineering. In this role, you will be responsible for providing service on our products at customer sites. The position provides customer contact for all post-installation problems on security systems and equipment, as well as, special project work, when needed. Responsibilities • Services intrusion, fire, CCTV, and access control security systems., • Performs scheduled, routing preventive maintenance on a variety of equipment/systems under contract agreement by inspecting, adjusting, cleaning, and calibrating systems and checking out equipment to ensure it’s in satisfactory working order., • Completes maintenance, within assigned hours, in a manner that reduces emergency calls and results in achieving the goal of zero call backs., • Assists with the start-up of new equipment or system installation and adjusts as needed to ensure the system is operational, • May plan schedules, lay out basic electrical equipment installations, and assist in the start-up and check-out of new systems installations, • Presents a professional image both in personal and vehicle appearance., • Performs work assignments in a safe manner and within specified cost limits., • Promotes, builds, and maintains good customer relations and assists with contract retention., • Maintains company propriety and documentation in accordance with established policies; handles proprietary information in the prescribed manner; adheres to and supports Securitas Technology policies and procedures including all safety requirements., • Keeps abreast of changes and new developments in products and technology., • Attends and completes training programs as requested. Minimum Requirements • MUST HOLD a minimum of 1-2 years of experience installing and/or servicing intrusion, access control, and CCTV security systems., • High School Diploma or equivalent, • Vocational/Technical Degree in electrical, security, or computer systems preferred., • A thorough knowledge and understanding of intrusion detection systems, electronic access control, CCTV, IP video, Surveillance systems and life safety systems., • Lenel, Matrix, DMP certifications preferred., • DMP system knowledge preferred., • IP Video and IT experience preferred., • Climb ladders that extend up to 24 ft. in height., • Avigilon, March Networks and AXIS Camera knowledge., • Carry items up to 75 pounds., • Ability to work on-call on a rotational basis covering after hours & weekend emergency calls., • A valid state driver’s license, without restrictions, is required. Securitas offers comprehensive benefits including • Highly competitive salary, • Company Vehicle, • Company Cell Phone, • Opportunity for annual merit pay increases., • Paid company training, • Medical, Dental, Vision, and Life Insurance, • Company Paid Short Term and Long-Term Disability, • 401K with 60% Match up to 6% of salary, • Paid vacation, holiday, and sick time, • Educational Assistance, • Exceptional growth opportunities, • Wide variety of employee discounts on travel, equipment, and more! We are a nationwide provider of security solutions, and an equal opportunity employer committed to a diverse workforce. Our core values of Integrity, Vigilance and Helpfulness are proudly demonstrated daily by our employees to our customers and the communities we service.

Securitas Technology Corporation, part of Securitas, is a world-leading provider of integrated security solutions that protect, connect, and optimize businesses of all types and sizes. More than 13,000 colleagues in 40 countries are focused daily on our purpose to help make your world a safer place and our commitment to deliver an unparalleled client experience. With clients at the heart of all we do, our people, knowledge, and technology power our connected ecosystem of health, safety and security solutions and services. We currently have an Embedded Installation Technician opening for team-oriented individuals possessing vocational training in electronics or electromechanical engineering. In this role, you will be responsible for providing service on our products at customer sites. The position provides customer contact for all post-installation problems on security systems and equipment, as well as, special project work, when needed. Responsibilities • Services intrusion, fire, CCTV, and access control security systems., • Performs scheduled, routing preventive maintenance on a variety of equipment/systems under contract agreement by inspecting, adjusting, cleaning, and calibrating systems and checking out equipment to ensure it’s in satisfactory working order., • Completes maintenance, within assigned hours, in a manner that reduces emergency calls and results in achieving the goal of zero call backs., • Assists with the start-up of new equipment or system installation and adjusts as needed to ensure the system is operational, • May plan schedules, lay out basic electrical equipment installations, and assist in the start-up and check-out of new systems installations, • Presents a professional image both in personal and vehicle appearance., • Performs work assignments in a safe manner and within specified cost limits., • Promotes, builds, and maintains good customer relations and assists with contract retention., • Maintains company propriety and documentation in accordance with established policies; handles proprietary information in the prescribed manner; adheres to and supports Securitas Technology policies and procedures including all safety requirements., • Keeps abreast of changes and new developments in products and technology., • Attends and completes training programs as requested. Minimum Requirements • MUST HOLD a minimum of 1-2 years of experience installing and/or servicing intrusion, access control, and CCTV security systems., • High School Diploma or equivalent, • Vocational/Technical Degree in electrical, security, or computer systems preferred., • A thorough knowledge and understanding of intrusion detection systems, electronic access control, CCTV, IP video, Surveillance systems and life safety systems., • Lenel, Matrix, DMP certifications preferred., • DMP system knowledge preferred., • IP Video and IT experience preferred., • Climb ladders that extend up to 24 ft. in height., • Avigilon, March Networks and AXIS Camera knowledge., • Carry items up to 75 pounds., • Ability to work on-call on a rotational basis covering after hours & weekend emergency calls., • A valid state driver’s license, without restrictions, is required. Securitas offers comprehensive benefits including • Highly competitive salary, • Company Vehicle, • Company Cell Phone, • Opportunity for annual merit pay increases., • Paid company training, • Medical, Dental, Vision, and Life Insurance, • Company Paid Short Term and Long-Term Disability, • 401K with 60% Match up to 6% of salary, • Paid vacation, holiday, and sick time, • Educational Assistance, • Exceptional growth opportunities, • Wide variety of employee discounts on travel, equipment, and more! We are a nationwide provider of security solutions, and an equal opportunity employer committed to a diverse workforce. Our core values of Integrity, Vigilance and Helpfulness are proudly demonstrated daily by our employees to our customers and the communities we service.

Securitas Technology Corporation, part of Securitas, is a world-leading provider of integrated security solutions that protect, connect, and optimize businesses of all types and sizes. More than 13,000 colleagues in 40 countries are focused daily on our purpose to help make your world a safer place and our commitment to deliver an unparalleled client experience. With clients at the heart of all we do, our people, knowledge, and technology power our connected ecosystem of health, safety and security solutions and services. We currently have an Embedded Installation Technician opening for team-oriented individuals possessing vocational training in electronics or electromechanical engineering. In this role, you will be responsible for providing service on our products at customer sites. The position provides customer contact for all post-installation problems on security systems and equipment, as well as, special project work, when needed. Responsibilities • Services intrusion, fire, CCTV, and access control security systems., • Performs scheduled, routing preventive maintenance on a variety of equipment/systems under contract agreement by inspecting, adjusting, cleaning, and calibrating systems and checking out equipment to ensure it’s in satisfactory working order., • Completes maintenance, within assigned hours, in a manner that reduces emergency calls and results in achieving the goal of zero call backs., • Assists with the start-up of new equipment or system installation and adjusts as needed to ensure the system is operational, • May plan schedules, lay out basic electrical equipment installations, and assist in the start-up and check-out of new systems installations, • Presents a professional image both in personal and vehicle appearance., • Performs work assignments in a safe manner and within specified cost limits., • Promotes, builds, and maintains good customer relations and assists with contract retention., • Maintains company propriety and documentation in accordance with established policies; handles proprietary information in the prescribed manner; adheres to and supports Securitas Technology policies and procedures including all safety requirements., • Keeps abreast of changes and new developments in products and technology., • Attends and completes training programs as requested. Minimum Requirements • MUST HOLD a minimum of 1-2 years of experience installing and/or servicing intrusion, access control, and CCTV security systems., • High School Diploma or equivalent, • Vocational/Technical Degree in electrical, security, or computer systems preferred., • A thorough knowledge and understanding of intrusion detection systems, electronic access control, CCTV, IP video, Surveillance systems and life safety systems., • Lenel, Matrix, DMP certifications preferred., • DMP system knowledge preferred., • IP Video and IT experience preferred., • Climb ladders that extend up to 24 ft. in height., • Avigilon, March Networks and AXIS Camera knowledge., • Carry items up to 75 pounds., • Ability to work on-call on a rotational basis covering after hours & weekend emergency calls., • A valid state driver’s license, without restrictions, is required. Securitas offers comprehensive benefits including • Highly competitive salary, • Company Vehicle, • Company Cell Phone, • Opportunity for annual merit pay increases., • Paid company training, • Medical, Dental, Vision, and Life Insurance, • Company Paid Short Term and Long-Term Disability, • 401K with 60% Match up to 6% of salary, • Paid vacation, holiday, and sick time, • Educational Assistance, • Exceptional growth opportunities, • Wide variety of employee discounts on travel, equipment, and more! We are a nationwide provider of security solutions, and an equal opportunity employer committed to a diverse workforce. Our core values of Integrity, Vigilance and Helpfulness are proudly demonstrated daily by our employees to our customers and the communities we service.

Securitas Technology Corporation, part of Securitas, is a world-leading provider of integrated security solutions that protect, connect, and optimize businesses of all types and sizes. More than 13,000 colleagues in 40 countries are focused daily on our purpose to help make your world a safer place and our commitment to deliver an unparalleled client experience. With clients at the heart of all we do, our people, knowledge, and technology power our connected ecosystem of health, safety and security solutions and services. We currently have an Embedded Installation Technician opening for team-oriented individuals possessing vocational training in electronics or electromechanical engineering. In this role, you will be responsible for providing service on our products at customer sites. The position provides customer contact for all post-installation problems on security systems and equipment, as well as, special project work, when needed. Responsibilities • Services intrusion, fire, CCTV, and access control security systems., • Performs scheduled, routing preventive maintenance on a variety of equipment/systems under contract agreement by inspecting, adjusting, cleaning, and calibrating systems and checking out equipment to ensure it’s in satisfactory working order., • Completes maintenance, within assigned hours, in a manner that reduces emergency calls and results in achieving the goal of zero call backs., • Assists with the start-up of new equipment or system installation and adjusts as needed to ensure the system is operational, • May plan schedules, lay out basic electrical equipment installations, and assist in the start-up and check-out of new systems installations, • Presents a professional image both in personal and vehicle appearance., • Performs work assignments in a safe manner and within specified cost limits., • Promotes, builds, and maintains good customer relations and assists with contract retention., • Maintains company propriety and documentation in accordance with established policies; handles proprietary information in the prescribed manner; adheres to and supports Securitas Technology policies and procedures including all safety requirements., • Keeps abreast of changes and new developments in products and technology., • Attends and completes training programs as requested. Minimum Requirements • MUST HOLD a minimum of 1-2 years of experience installing and/or servicing intrusion, access control, and CCTV security systems., • High School Diploma or equivalent, • Vocational/Technical Degree in electrical, security, or computer systems preferred., • A thorough knowledge and understanding of intrusion detection systems, electronic access control, CCTV, IP video, Surveillance systems and life safety systems., • Lenel, Matrix, DMP certifications preferred., • DMP system knowledge preferred., • IP Video and IT experience preferred., • Climb ladders that extend up to 24 ft. in height., • Avigilon, March Networks and AXIS Camera knowledge., • Carry items up to 75 pounds., • Ability to work on-call on a rotational basis covering after hours & weekend emergency calls., • A valid state driver’s license, without restrictions, is required. Securitas offers comprehensive benefits including • Highly competitive salary, • Company Vehicle, • Company Cell Phone, • Opportunity for annual merit pay increases., • Paid company training, • Medical, Dental, Vision, and Life Insurance, • Company Paid Short Term and Long-Term Disability, • 401K with 60% Match up to 6% of salary, • Paid vacation, holiday, and sick time, • Educational Assistance, • Exceptional growth opportunities, • Wide variety of employee discounts on travel, equipment, and more! We are a nationwide provider of security solutions, and an equal opportunity employer committed to a diverse workforce. Our core values of Integrity, Vigilance and Helpfulness are proudly demonstrated daily by our employees to our customers and the communities we service.

Securitas Technology Corporation, part of Securitas, is a world-leading provider of integrated security solutions that protect, connect, and optimize businesses of all types and sizes. More than 13,000 colleagues in 40 countries are focused daily on our purpose to help make your world a safer place and our commitment to deliver an unparalleled client experience. With clients at the heart of all we do, our people, knowledge, and technology power our connected ecosystem of health, safety and security solutions and services. We currently have an Embedded Installation Technician opening for team-oriented individuals possessing vocational training in electronics or electromechanical engineering. In this role, you will be responsible for providing service on our products at customer sites. The position provides customer contact for all post-installation problems on security systems and equipment, as well as, special project work, when needed. Responsibilities • Services intrusion, fire, CCTV, and access control security systems., • Performs scheduled, routing preventive maintenance on a variety of equipment/systems under contract agreement by inspecting, adjusting, cleaning, and calibrating systems and checking out equipment to ensure it’s in satisfactory working order., • Completes maintenance, within assigned hours, in a manner that reduces emergency calls and results in achieving the goal of zero call backs., • Assists with the start-up of new equipment or system installation and adjusts as needed to ensure the system is operational, • May plan schedules, lay out basic electrical equipment installations, and assist in the start-up and check-out of new systems installations, • Presents a professional image both in personal and vehicle appearance., • Performs work assignments in a safe manner and within specified cost limits., • Promotes, builds, and maintains good customer relations and assists with contract retention., • Maintains company propriety and documentation in accordance with established policies; handles proprietary information in the prescribed manner; adheres to and supports Securitas Technology policies and procedures including all safety requirements., • Keeps abreast of changes and new developments in products and technology., • Attends and completes training programs as requested. Minimum Requirements • MUST HOLD a minimum of 1-2 years of experience installing and/or servicing intrusion, access control, and CCTV security systems., • High School Diploma or equivalent, • Vocational/Technical Degree in electrical, security, or computer systems preferred., • A thorough knowledge and understanding of intrusion detection systems, electronic access control, CCTV, IP video, Surveillance systems and life safety systems., • Lenel, Matrix, DMP certifications preferred., • DMP system knowledge preferred., • IP Video and IT experience preferred., • Climb ladders that extend up to 24 ft. in height., • Avigilon, March Networks and AXIS Camera knowledge., • Carry items up to 75 pounds., • Ability to work on-call on a rotational basis covering after hours & weekend emergency calls., • A valid state driver’s license, without restrictions, is required. Securitas offers comprehensive benefits including • Highly competitive salary, • Company Vehicle, • Company Cell Phone, • Opportunity for annual merit pay increases., • Paid company training, • Medical, Dental, Vision, and Life Insurance, • Company Paid Short Term and Long-Term Disability, • 401K with 60% Match up to 6% of salary, • Paid vacation, holiday, and sick time, • Educational Assistance, • Exceptional growth opportunities, • Wide variety of employee discounts on travel, equipment, and more! We are a nationwide provider of security solutions, and an equal opportunity employer committed to a diverse workforce. Our core values of Integrity, Vigilance and Helpfulness are proudly demonstrated daily by our employees to our customers and the communities we service.

Securitas Technology Corporation, part of Securitas, is a world-leading provider of integrated security solutions that protect, connect, and optimize businesses of all types and sizes. More than 13,000 colleagues in 40 countries are focused daily on our purpose to help make your world a safer place and our commitment to deliver an unparalleled client experience. With clients at the heart of all we do, our people, knowledge, and technology power our connected ecosystem of health, safety and security solutions and services. We currently have an Embedded Installation Technician opening for team-oriented individuals possessing vocational training in electronics or electromechanical engineering. In this role, you will be responsible for providing service on our products at customer sites. The position provides customer contact for all post-installation problems on security systems and equipment, as well as, special project work, when needed. Responsibilities • Services intrusion, fire, CCTV, and access control security systems., • Performs scheduled, routing preventive maintenance on a variety of equipment/systems under contract agreement by inspecting, adjusting, cleaning, and calibrating systems and checking out equipment to ensure it’s in satisfactory working order., • Completes maintenance, within assigned hours, in a manner that reduces emergency calls and results in achieving the goal of zero call backs., • Assists with the start-up of new equipment or system installation and adjusts as needed to ensure the system is operational, • May plan schedules, lay out basic electrical equipment installations, and assist in the start-up and check-out of new systems installations, • Presents a professional image both in personal and vehicle appearance., • Performs work assignments in a safe manner and within specified cost limits., • Promotes, builds, and maintains good customer relations and assists with contract retention., • Maintains company propriety and documentation in accordance with established policies; handles proprietary information in the prescribed manner; adheres to and supports Securitas Technology policies and procedures including all safety requirements., • Keeps abreast of changes and new developments in products and technology., • Attends and completes training programs as requested. Minimum Requirements • MUST HOLD a minimum of 1-2 years of experience installing and/or servicing intrusion, access control, and CCTV security systems., • High School Diploma or equivalent, • Vocational/Technical Degree in electrical, security, or computer systems preferred., • A thorough knowledge and understanding of intrusion detection systems, electronic access control, CCTV, IP video, Surveillance systems and life safety systems., • Lenel, Matrix, DMP certifications preferred., • DMP system knowledge preferred., • IP Video and IT experience preferred., • Climb ladders that extend up to 24 ft. in height., • Avigilon, March Networks and AXIS Camera knowledge., • Carry items up to 75 pounds., • Ability to work on-call on a rotational basis covering after hours & weekend emergency calls., • A valid state driver’s license, without restrictions, is required. Securitas offers comprehensive benefits including • Highly competitive salary, • Company Vehicle, • Company Cell Phone, • Opportunity for annual merit pay increases., • Paid company training, • Medical, Dental, Vision, and Life Insurance, • Company Paid Short Term and Long-Term Disability, • 401K with 60% Match up to 6% of salary, • Paid vacation, holiday, and sick time, • Educational Assistance, • Exceptional growth opportunities, • Wide variety of employee discounts on travel, equipment, and more! We are a nationwide provider of security solutions, and an equal opportunity employer committed to a diverse workforce. Our core values of Integrity, Vigilance and Helpfulness are proudly demonstrated daily by our employees to our customers and the communities we service.

Securitas Technology Corporation, part of Securitas, is a world-leading provider of integrated security solutions that protect, connect, and optimize businesses of all types and sizes. More than 13,000 colleagues in 40 countries are focused daily on our purpose to help make your world a safer place and our commitment to deliver an unparalleled client experience. With clients at the heart of all we do, our people, knowledge, and technology power our connected ecosystem of health, safety and security solutions and services. We currently have an Embedded Installation Technician opening for team-oriented individuals possessing vocational training in electronics or electromechanical engineering. In this role, you will be responsible for providing service on our products at customer sites. The position provides customer contact for all post-installation problems on security systems and equipment, as well as, special project work, when needed. Responsibilities • Services intrusion, fire, CCTV, and access control security systems., • Performs scheduled, routing preventive maintenance on a variety of equipment/systems under contract agreement by inspecting, adjusting, cleaning, and calibrating systems and checking out equipment to ensure it’s in satisfactory working order., • Completes maintenance, within assigned hours, in a manner that reduces emergency calls and results in achieving the goal of zero call backs., • Assists with the start-up of new equipment or system installation and adjusts as needed to ensure the system is operational, • May plan schedules, lay out basic electrical equipment installations, and assist in the start-up and check-out of new systems installations, • Presents a professional image both in personal and vehicle appearance., • Performs work assignments in a safe manner and within specified cost limits., • Promotes, builds, and maintains good customer relations and assists with contract retention., • Maintains company propriety and documentation in accordance with established policies; handles proprietary information in the prescribed manner; adheres to and supports Securitas Technology policies and procedures including all safety requirements., • Keeps abreast of changes and new developments in products and technology., • Attends and completes training programs as requested. Minimum Requirements • MUST HOLD a minimum of 1-2 years of experience installing and/or servicing intrusion, access control, and CCTV security systems., • High School Diploma or equivalent, • Vocational/Technical Degree in electrical, security, or computer systems preferred., • A thorough knowledge and understanding of intrusion detection systems, electronic access control, CCTV, IP video, Surveillance systems and life safety systems., • Lenel, Matrix, DMP certifications preferred., • DMP system knowledge preferred., • IP Video and IT experience preferred., • Climb ladders that extend up to 24 ft. in height., • Avigilon, March Networks and AXIS Camera knowledge., • Carry items up to 75 pounds., • Ability to work on-call on a rotational basis covering after hours & weekend emergency calls., • A valid state driver’s license, without restrictions, is required. Securitas offers comprehensive benefits including • Highly competitive salary, • Company Vehicle, • Company Cell Phone, • Opportunity for annual merit pay increases., • Paid company training, • Medical, Dental, Vision, and Life Insurance, • Company Paid Short Term and Long-Term Disability, • 401K with 60% Match up to 6% of salary, • Paid vacation, holiday, and sick time, • Educational Assistance, • Exceptional growth opportunities, • Wide variety of employee discounts on travel, equipment, and more! We are a nationwide provider of security solutions, and an equal opportunity employer committed to a diverse workforce. Our core values of Integrity, Vigilance and Helpfulness are proudly demonstrated daily by our employees to our customers and the communities we service.

Job Description • Postition is based in Houston, Tx, • Pay Range: $25 - $36 per hour Hazardous materials Technicians are individuals who respond to releases or potential releases for the purpose of stopping the release. They assume a more aggressive role than a first responder at the operations level in that they will approach the point of release in order to plug, patch or otherwise stop the release of a hazardous substance. Primary Responsibilities and Daily Duties The role of a HAZMAT Technician goes far beyond simply handling chemicals. It's a job that requires a thorough understanding of the properties of the materials they work with, as well as the regulations in force for their management. These professionals must also be equipped to respond to emergencies, such as accidental spills, and be able to advise other professionals and the general public on best handling and disposal practices. · Identification and classification: Recognize and classify hazardous materials according to their composition and level of risk. · Safe storage: Ensure that materials are stored under appropriate conditions to prevent any risk of leakage, incompatibility or contamination. · Handling: Use appropriate PPE and techniques to handle hazardous materials, to minimize minimizing risks of all kinds; · Disposal: Organize and supervise the safe disposal of materials, whether by incineration, recycling or other approved methods. · Emergency response: Respond rapidly to incidents or accidents involving hazardous materials, implementing response protocols to contain and manage a situation. · Advice and training: Provide advice to colleagues, companies and the general public on the safe handling of hazardous materials, and offer training when required. · Regulatory watch: Stay aware and keep up to date on the latest regulations and standards in hazardous materials management. · Emergency response: In emergency situations like transportation accidents or industrial spills, HAZMAT Technicians often work under pressure in collaboration with other emergency services to manage and mitigate risks. Required Skills and Qualities HAZMAT Technicians must understand and be able to implement their Emergency response plan, have a working knowledge of the Incident Command System, be able to work in the proper PPE, proficient in contamination assessment, decontamination and operating within an approved Incident Action Plan. Training and qualifications HAZMAT Technicians are trained to the 29 CFR 1910.120 (q)(6)(iii) standard. Hazardous materials Technicians shall have received at least 24 hours of training equal to the first responder operations level and in addition have competency in the following areas and the employer shall so certify: (A) Know how to implement the employer's emergency response plan. (B) Know the classification, identification and verification of known and unknown materials by using field survey instruments and equipment. (C) Be able to function within an assigned role in the Incident Command System. (D) Know how to select and use proper specialized chemical personal protective equipment provided to the hazardous materials Technician. (E) Understand hazard and risk assessment techniques. (F) Be able to perform advance control, containment, and/or confinement operations within the capabilities of the resources and personal protective equipment available with the unit. (G) Understand and implement decontamination procedures. (H) Understand termination procedures. (I) Understand basic chemical and toxicological terminology and behavior. Essential technical skills and soft skills · Knowledge of hazardous materials: HAZMAT Technicians need a thorough understanding of the different categories of hazardous materials, their properties and associated risks. · Mastery of regulations: Up-to-date knowledge of applicable local regulations concerning the storage, transport and disposal of hazardous materials; · Laboratory skills: Hamzat Technicians must perform tests, analyze samples and use laboratory equipment as required. · Communication skills: HAZMAT Technicians may need to explain complex information clearly and effectively to a variety of audiences, including colleagues, managers and the general public. · Problem solving: It is also necessary to be able to quickly assess a situation, identify potential solutions and act decisively. · Adaptability: The unpredictable nature of hazardous materials incidents means that HAZMAT Technicians must be able to adapt quickly to changing situations. Company DescriptionFull Service Emergency Response Services and Training Company. Visit website at Service Emergency Response Services and Training Company. Visit website at

Job Description Audiovisual (AV) Technician – Join Our Elite Integration Team Are you passionate about cutting-edge technology and delivering exceptional AV experiences? We're seeking a skilled and motivated Audiovisual Technician to join our growing team of professionals. This role offers hands-on involvement in high-end electronics and automation systems, with opportunities to advance into programming, project management, service, or sales. What You’ll Do As an AV Technician, you’ll be responsible for the full lifecycle of AV system installations at client sites, including: * Installing, configuring, testing, and servicing advanced AV and automation systems * Running, terminating, and testing low-voltage wiring in both new construction and remodeling projects * Performing basic network configurations and installing/dressing professional-grade equipment racks * Maintaining a clean, organized, and professional work environment at all job sites * Collaborating directly with Project Managers to ensure seamless execution Growth Opportunities This position offers significant potential for career development in: * AV system programming (Crestron, Savant, Lutron, etc.) * Project management * Technical service and support * Sales and client consultation ✅ What We’re Looking For We’re seeking an experienced technician with strong technical skills and a commitment to excellence. Ideal candidates will have experience in: * Installing AV components, media rooms, and automation systems * Rack building, wire dressing, and cable management * Mounting TVs, projectors, and screens * Installing in-ceiling/in-wall speakers and touchscreens * Reading and interpreting wiring diagrams and blueprints * Troubleshooting signal flow and system issues Preferred Skills & Certifications: * Experience with Crestron, Extron, Savant, Josh Ai, and other control systems * OSHA 10 or higher certification * CTS certification (highly valued) * Familiarity with 70V commercial audio systems * Knowledge of low-voltage cabling standards and termination techniques What You Bring * A strong work ethic and eagerness to learn * Ability to work independently and take ownership of your work * Excellent teamwork and customer service mindset * Clean driving record and ability to pass a background check and drug screening * Reliable transportation and basic low-voltage tools Ready to take your AV career to the next level? Apply now and become part of a team that values innovation, craftsmanship, and growth. Company DescriptionFE Solutions SmartHome is the Residential arm of FE Solutions an AVL Integrator located in Houston, Texas. We design and install AV solutions for high-end luxury properties in the Houston and Surrounding areas.FE Solutions SmartHome is the Residential arm of FE Solutions an AVL Integrator located in Houston, Texas. We design and install AV solutions for high-end luxury properties in the Houston and Surrounding areas.

Responsibilities: \n\n • Follows, without exception, all work instructions and safety policies, including use of all PPE and safety equipment\n, • Performs routine preventive maintenance checks on all production equipment and machinery\n, • Repairs basic mechanical components and replace parts on machines such as bearings, filters, wiring, valves, gauges and switches\n, • Observes and listens to mechanical devices in operation to locate causes of problem\n, • Dismantles devices to gain access to and remove defective parts\n, • Lubricates and cleans machinery and support equipment to maintain housekeeping and preventive maintenance standards within the plant\n, • Accomplishes all work orders to maintain safety; reduce downtime; decrease scrap; improve quality production; and improve plant efficiency\n, • Follows all safety rules and procedures including Lockout/Tagout program, housekeeping and observes the operations to insure a safe work environment \n, • Troubleshoot equipment failures to determine root cause and initiate appropriate remedial action.\n, • Repair of equipment to improve availability and reliability for production.\n, • Collect and analyze work delay codes to identify challenges to timely completion of scheduled jobs and work with available resources to reduce delays.\n, • Ensure preventative maintenance compliance and that repair history is properly documented.\n, • Assist in sourcing and requisitioning maintenance supplies, equipment, and services within budgeted guidelines.\n, • Three to five years of work experience in a manufacturing plant as a Maintenance Mechanic or Technician\n, • Knowledge and experience working with high-speed equipment and electric-pneumatic controls.\n, • Able to use both a MIG welder, and ARC welder.\n, • Able to order parts and maintain inventory of all maintenance-related material.\n, • Advanced working knowledge on mechanical/electrical systems and components; including, but not limited to, Pneumatic, Hydraulic, Pumps, Gear Boxes, Power Transmission, Material Handling, Sensor, Transmitters, DC and AC circuits, Transformers, Power and Energy, Arc Flash\n, • Working knowledge and experience on Automation; Industrial Process and Control system; PLC; Measuring Devices; Instrumentation; Robotic Application; Bulk Handling System\n, • Working knowledge and experience on Facility Maintenance (Roof, Dock, plumbing) and Plant Equipment (Boiler, Air Compressors, Ammonia/Freon/Glycol Refrigeration, HVAC, Ventilation, Cooling Tower, Condenser, Backflow preventer, Sprinkler and Fire Extinguisher, Wastewater System, …)\n, • Planning, scheduling & assigning ability while well experienced in defining priorities, required skills & resources.\n, • Hold practical knowledge of Microsoft Office.\n, • Multitasked in a fast-paced environment with lots of changes in direction bases business requirement.\n, • Excellent problem-solving and analytical skills; ability to work collaboratively and effectively with other departments. \nDo you want to work with people who are dedicated to innovation and making the world a better place? Do you want to build a career with a company that provides opportunities for growth and development? Mauser Packaging Solutions is that company. Our mission is to help our customers achieve better sustainability with their packaging. And we do that by giving our people the opportunity to do important work, solve interesting problems and be part of a diverse, forward-looking team. At Mauser Packaging Solutions, you can be proud to work for a company that’s always striving to innovate and serve customers better—and help them be better stewards of the environment. Whether you’re a seasoned professional—or just beginning your career—there’s a place where you can help make a difference at Mauser Packaging Solutions. Join us!\n\n \n\n\n Mauser Packaging Solutions is an equal opportunity employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, age, protected veteran status, or disability status. \n Benefits: Not Applicable

Job DescriptionSalary: We are seeking an OPTOMETRIC ASSISTANT/OPTICIANto become a part of our team! You responsible for providing direct patient care to patients seen in the Vision centers. Responsibilities • Responsible for providing direct patient care to patients seen in the Vision centers, • Complete patient pre-workup (medical history, autorefractor, IOP measurement, and pupils) for the doctor, • Maintaining office cleanliness and organization of resources, • Assist with frame styling customers with correct fitting eye wear, frame, and lens selection. Conclude exam with eyewear selection, sales, and ordering of final glasses/contacts., • Ability to use diagnostic equipment such as auto-refraction tests, • Responsible for building and maintaining a robust patient schedule., • Fast paced rewarding environment, multi-tasking from technician responsibilities, optical, and scheduling in real time required., • Assist with frame styling customers with correct fitting eye wear, frame, and lens selection, • Answering telephones and scheduling appointments, • Knowledgeable of HIPAA and OSHA regulations, • Communicate in a culturally competent and effective manner to clients/caregivers regarding the services available Qualifications • Experience preferred but not required: training provided for optical, and optometry related skills., • Willing to stay up to date in optometry advancements and continued education., • Good keyboard skills - 35 wpm, • Ability to work with frequent interruptions and maintain emotional control under stress, • Detailed oriented and organized, • Great interpersonal skills, • Good oral and written communication skills, • Willing to travel to multiple locations, • Occasional very light lifting, up to 20 pounds or an equivalent weight may be required, • Must be willing to work a rotating schedule between Greenspoint and Conroe Health Centers Working Conditions • The position occasionally requires sitting, standing and bending. Occasional very light lifting, up to 20 pounds or an equivalent weight may be required Employment Benefits • Competitive Pay, Paid Time Off Plan, Comprehensive Medical/Dental/Vision, Life Insurance, 401k (6% Match), Paid Federal Holidays, Tuition Reimbursement, New Homeownership Incentive, New Certification/Licensure Bonus, Loan Forgiveness (Conditions apply). EEO Statement:St. Hope Foundation is an equal opportunity employer and will not discriminate against any employee or applicant on the basis of age, color, disability, gender, national origin, race, religion, sexual orientation, veteran status, or any classification protected by federal, state, or local law.

Job DescriptionHouston Opportunity: Which path fits you best? Do you love shaping metal with exacting accuracy? Or do you take pride in catching the smallest variance before it leaves the floor? In our supportive, team-first environment, you can choose the path that aligns with your strengths—either operating press brake machinery or leading with meticulous quality checks. Pick your focusPress Brake Technician • Configure and operate sheet metal press brakes to form components to precise specifications.Manufacturing Quality Specialist, • Inspect fabricated parts—during production and after completion—to ensure compliance with drawings, specs, and industry standards.Bring your strengths, • High school diploma or equivalent; technical fabrication training preferred., • Proven experience in sheet metal press brake operation or quality control within manufacturing., • Working knowledge of metal fabrication processes and quality standards., • Fluency in reading blueprints and technical drawings., • Exceptional attention to detail and problem-solving mindset., • Strong communication skills and a collaborative approach.

Magnet Medical is seeking a travel Cath Lab Technologist for a travel job in Pasadena, Texas. Job Description & Requirements • Specialty: Cath Lab Technologist, • Discipline: Allied Health Professional, • Start Date: 01/19/2026, • Duration: 13 weeks, • 40 hours per week, • Shift: 10 hours, days, • Employment Type: Travel A Cath Lab Technician (also known as a Cardiac Catheterization Lab Technician) is a specialized healthcare professional who works alongside cardiologists, radiologists, and other medical staff to perform diagnostic and interventional procedures in the cardiac catheterization lab (cath lab). These procedures are primarily focused on diagnosing and treating heart conditions, including coronary artery disease, arrhythmias, and structural heart problems. Cath Lab Technicians are responsible for preparing and maintaining equipment, assisting with catheter-based procedures, and ensuring patient safety during these complex procedures. Key Responsibilities: * Pre-Procedure Preparation: • Prepare the cath lab environment for procedures by ensuring all necessary equipment and tools are sterile, functional, and properly set up (e.g., catheters, guidewires, contrast agents, X-ray machines)., • Verify patient information, including medical history, allergies, and consent forms, before the procedure begins., • Assist in the preparation of patients, including setting up the monitoring equipment and ensuring proper positioning for optimal procedure results., • Provide patient education and reassurance before the procedure, explaining what will happen and answering any questions. Assisting with Procedures: • Assist cardiologists and other physicians during cardiac catheterization, angioplasty, stent placement, electrophysiological studies, and other interventional procedures., • Handle sterile instruments, such as catheters, balloons, and stents, during the procedure, ensuring correct placement and maintaining a sterile field., • Operate X-ray fluoroscopy equipment and assist with imaging during diagnostic tests, such as angiograms, to visualize blood vessels and heart function., • Monitor vital signs (e.g., heart rate, blood pressure, oxygen saturation) during procedures and report any abnormalities to the physician., • Administer medications under physician direction, such as sedatives or contrast dyes, ensuring patient safety throughout the procedure. Post-Procedure Care: • Monitor patients for immediate complications after the procedure, such as bleeding, changes in vital signs, or signs of infection., • Assist in transferring the patient from the procedure table to recovery, ensuring comfort and safety during transport., • Help with patient recovery by monitoring cardiac rhythm, vital signs, and the insertion site for any signs of complications, particularly bleeding or hematoma formation., • Provide post-procedure instructions to patients and their families, including advice on post-operative care, activity restrictions, and follow-up appointments. Equipment Management and Maintenance: • Maintain, clean, and sterilize the cath lab equipment and instruments, ensuring they are functioning properly and ready for the next procedure., • Regularly check and troubleshoot cath lab machinery, including X-ray equipment, electrocardiograms (EKG), defibrillators, and patient monitors., • Order necessary supplies, manage inventory, and ensure all materials needed for procedures are available and in good condition., • Assist in the calibration of equipment to ensure accurate diagnostic results. Patient Monitoring and Safety: • Continuously monitor the patient's vital signs during the procedure, ensuring optimal conditions for the intervention., • Ensure proper documentation of patient information, procedures, and outcomes in the electronic health record (EHR) or procedure logs., • Adhere to safety and infection control protocols, including the correct use of personal protective equipment (PPE), sterile techniques, and radiation safety protocols to minimize exposure to patients and staff., • Monitor the catheter insertion site for signs of complications such as infection or clot formation. Collaboration with Medical Team: • Work closely with cardiologists, radiologists, nurses, and other healthcare professionals to provide high-quality care for patients undergoing catheterization or other cardiac procedures., • Attend pre-procedure meetings to review patient conditions and provide input on the appropriate procedure., • Assist in evaluating the results of diagnostic tests, including angiograms, to support the development of treatment plans. Education and Training: • Stay up to date with the latest advancements in cardiac catheterization techniques, equipment, and best practices., • Participate in ongoing education, certification programs, and training in areas such as radiation safety, advanced cardiovascular life support (ACLS), and other relevant certifications., • Educate patients about their condition, the procedure they are undergoing, and the importance of follow-up care., • Assist in training and mentoring new staff or students in the cath lab environment. Quality Control and Compliance: • Adhere to all regulatory guidelines, including HIPAA for patient privacy, OSHA safety standards, and Joint Commission requirements., • Ensure that all procedures and documentation meet hospital policies, accreditation standards, and industry regulations.

Job Description Position Overview: The Shelter Veterinary Technician plays a critical role in the intake and care of animals at the Houston Humane Society. This position is responsible for processing incoming animals, assessing their health and behavior, assisting veterinarians with evaluations of sick or injured animals, and ensuring proper placement within the shelter. The Shelter VT also helps maintain disease control, supports foster animal care, and, when necessary, performs humane euthanasia. Above all, this role requires treating all animals with compassion and ensuring their well-being. Principal Duties and Responsibilities: • Adhere to all department Standard Operating Procedures (SOPs)., • Conduct daily rounds to monitor the health and well-being of all shelter and clinic animals., • Assist the on-site veterinarian in evaluating animals showing signs of illness or injury., • Maintain a clean and organized work environment in the clinic and intake areas., • Communicate effectively with leadership, intake, foster, and behavior teams regarding any animal health or behavior concerns., • Process adoptable animals by administering vaccinations, de-wormer, flea medication, and other medications needed., • Perform and interpret diagnostic results such as heartworm tests, combo tests, fecal floats, among others, • Ensure accurate and up-to-date paperwork and records for each anima, including medical notes and services provided., • Ensure animals are always set up with food and water when moved to other locations, • Accurately administer medications daily to all in house animals currently on treatment, • Consistently follow up with patient records to ensure all foster and in house animals are up to date on recheck exams, vaccines, deworming, preventions, and lab results, • Provide client education to potential adopters and foster parents, • Perform or assist with humane euthanasia of all animals deemed unadoptable, severely ill, or injured, as authorized by a veterinarian, medical director, or shelter director., • Keep inventory stocked and request items in timely manner, • Perform all other duties as needed. Qualifications & Skills: • Must have a minimum High School Diploma or GED. A minimum of 1 year experience working with animals in a veterinary clinic or animal shelter environment. Preferred qualifications: Licensed Veterinary Technician (LVT), or Certified Veterinary Technician (CVT). Experience with shelter medicine and/or infectious disease protocols., • Able to provide client education to clients, • Able to perform venipuncture, administer vaccines, run and interpret diagnostics such as heartworm tests, fecal floats, and combo tests, among others, • Able to handle a variety of animals including animals that can be fractious, scared and aggressive, in a safe, humane and skillful manner., • Able to fluently speak, read and write English and have experience entering information into computer programs., • Able to work in an environment that can be emotionally, mentally and physically demanding., • Uphold the mission of the Houston Humane Society and work to maintain a positive image to the community. Clean and neat in appearance.

Description Introduction Do you want to join an organization that invests in you as a(an) Medical Lab Technician? At HCA Houston Healthcare Southeast, you come first. HCA Healthcare has committed up to $300 million in programs to support our incredible team members over the course of three years. Benefits HCA Houston Healthcare Southeast offers a total rewards package that supports the health, life, career and retirement of our colleagues. The available plans and programs include: • Comprehensive medical coverage that covers many common services at no cost or for a low copay. Plans include prescription drug and behavioral health coverage as well as free telemedicine services and free AirMed medical transportation., • Additional options for dental and vision benefits, life and disability coverage, flexible spending accounts, supplemental health protection plans (accident, critical illness, hospital indemnity), auto and home insurance, identity theft protection, legal counseling, long-term care coverage, moving assistance, pet insurance and more., • Free counseling services and resources for emotional, physical and financial wellbeing, • 401(k) Plan with a 100% match on 3% to 9% of pay (based on years of service), • Employee Stock Purchase Plan with 10% off HCA Healthcare stock, • Family support through fertility and family building benefits with Progyny and adoption assistance., • Referral services for child, elder and pet care, home and auto repair, event planning and more, • Consumer discounts through Abenity and Consumer Discounts, • Retirement readiness, rollover assistance services and preferred banking partnerships, • Education assistance (tuition, student loan, certification support, dependent scholarships), • Colleague recognition program, • Time Away From Work Program (paid time off, paid family leave, long- and short-term disability coverage and leaves of absence), • Employee Health Assistance Fund that offers free employee-only coverage to full-time and part-time colleagues based on income. Note: Eligibility for benefits may vary by location. You contribute to our success. Every role has an impact on our patients’ lives and you have the opportunity to make a difference. We are looking for a dedicated Medical Lab Technician like you to be a part of our team. Job Summary and Qualifications Under the general supervision of the Laboratory Manager, the Medical Lab Technician performs routine, complex or specialized bacteriological, hematological, chemical, immunological, serological and immunoassay procedures on body fluids. What you will do in this role: • Requires no supervision for processing specimens, performing testing, or reporting results. No review of patient results is required prior to reporting., • Maintains required competencies in all departments assigned., • Demonstrates accuracy for all testing performed., • Observes patient safety, risk management and infection control policies and procedures, • Performs related quality control and required proficiency testing according to policy and procedure., • Fulfills the duty and responsibility to maintain competence and to continue personal and professional growth., • Identifies and assists with opportunities for performance improvement activities on the unit and with other service areas., • Demonstrates fiscal responsibility by taking ownership of time management, decreasing waste (of time and supplies) and promoting cost effectiveness while maintaining patient safety and quality of care. To actively market services to increase volume and awareness., • Demonstrates the ability to be an advocate for and strive to protect the health, safety and rights of the patient., • Interactions with patients and colleagues demonstrate compassion and respect for the inherent dignity, worth, and uniqueness of every individual, unrestricted by considerations of social or economic status or cultural beliefs., • Communicate effectively with other care providers (physicians, nurses, business office, and medical records) to provide for continuity of patient care and to meet the needs of the customers we serve., • Demonstrates ability to fulfill requirements of attendance, punctuality, and timekeeping practices., • Behaviors and interactions demonstrate a positive attitude, personal initiative and motivation to achieve the goals of the unit, facility and organization., • To uphold the standards of the profession and organization and practice ethically and with integrity., • MT or equivalent certification, or be currently eligible to sit for MT or equivalent certification exam preferred, • One year clinical laboratory experience or equivalent clinical lab training preferred HCA Healthcare has been recognized as one of the World’s Most Ethical Companies® by the Ethisphere Institute more than ten times. In recent years, HCA Healthcare spent an estimated $3.7 billion in cost for the delivery of charitable care, uninsured discounts, and other uncompensated expenses. "Good people beget good people."- Dr. Thomas Frist, Sr. HCA Healthcare Co-Founder We are a family 270,000 dedicated professionals! Our Talent Acquisition team is reviewing applications for our Medical Lab Technician opening. Qualified candidates will be contacted for interviews. Submit your resume today to join our community of caring! We are an equal opportunity employer. We do not discriminate on the basis of race, religion, color, national origin, gender, sexual orientation, age, marital status, veteran status, or disability status.

Job Description This position is to assist the facility supervisor to provide support in the buildings, to keep up the support system, including but not limited to bathrooms, break rooms, common areas, moniting contractors on projects, and report back to the lead technician. all facility fit-up/ renovations/alterations and servicing of furniture and facility-related equipment, grounds keeping, and move coordination by direction of the lead or supervisor, the understanding of OSHA safety, must be flexible on hours and days. Callouts to the facility can also be expected during off-hours. Overtime may be required on occasion. Duties and Responsibilities • Understanding of maintenance programs, warranty maintenance programs, and energy management programs for: facilities, interior and exterior building components, mechanical components, furnishings, fixtures, landscaping, etc. Responsible for completing work order activity to include: internally generated work requests and projects. This includes responding to and rectifying any facility maintenance requests either by providing the maintenance and handyman services or utilizing contract services as required for maintaining the building structure and services., • Performs regular facility inspections/audits, including all common areas and storage rooms, identifying any facility deficiencies or follow-up work. Will provide written reports to supervisor/Manager outlining required maintenance complete with recommendations for work., • Grounds keeping: trash removal: Maintenance on: vehicles, equipment, and tools., • Respond to: any bathroom- flooding, broken water pipes or fixtures,support equipment failures., • Must have a minimum of 5 years of experience in Facility maintenance., • A knowledge of various building codes a plus, rules, regulations, and the operational procedures pertaining to the repair, maintenance, and construction of buildings, machines, and equipment., • Able to organize and process information in a logical, prioritized order, managing time effectively to accomplish tasks within stated or published deadlines., • Ensures the work assigned is completed within set guidelines, • Follows required OSHA’s applicable safety procedures and ensures personal, public, and co-worker safety when completing tasks., • Maintain records, daily work sheets for record keeping., • Ensures that equipment, workspaces, and tools supplied by the company are used for their intended purposes and are maintained in safe working order., • Exercises respectful and courteous communication and interactions with co-workers, contractors, consultants, suppliers, and all other members of our staff., • Manages own time effectively and ensures the immediate supervisor is kept informed of activities and progress of work., • Exercise discretion, confidentiality, and attention to detail., • Ensure regular work attendance and timely reporting for the start of the shift., • Carry out duties in a manner that ensures personal health and safety as well as the safety of others., • Ability to work in a team environment with minimum supervision., • Receptive to change, can adapt to changing circumstances, and make suggestions for improvement., • Ability to estimate materials and supply needs., • Ability to communicate effectively with the Manager, Corporate Building Services, and the Building Operator., • Thorough knowledge of the occupational hazards and corresponding safety precautions necessary for the safe performance of assigned duties., • Office-based role, fast-paced work environment, • This position must be able to respond to after-hour emergencies and be available to work non-core hours or overtime to complete various projects without interruption to operations.Skills, • An understanding of the electrical system and how to diagnose issues., • Good understanding of the operation of commercial buildings., • Knowledge of A/C systems, compressed air systems, vacuum pumps, and BAS systems., • Must have their own hand tools, a list will be provided. Also needed item not provided, steel toe boots or OSHA approved safety shoes with harden toe protection., • Manufacturing of products background is a plus. h0bLF3zTwT

Job Description * Handyman Job Description: As a handyman, the technician will be responsible for service calls that include electrical, plumbing, appliance maintenance, drywall and HVAC. Electrical: • Troubleshooting electrical problems and repairing them, • Install and maintain wiring, control, and lighting systems., • Ability to repair and replace main panels., • Inspect electrical components, such as transformers and circuit breakers. Plumbing: • Install and repair pipes, valves, fittings, drainage systems and garbage disposals, • Install and repair all types of water heaters (electrical, gas, tankless), • Toilet rebuilding and replacement, • Replacing faucets, shower mixers etc, • Main and lateral line cleaning using commercial snakes and/or hydro jetting Appliances: • Install, service and repair various household appliances, such as refrigerators, dishwashers, washers and ovens HVAC: Drywall: AEeXJgPAoF

Job Description We are looking for a PLC MAINTENANCE TECHNICIAN to join our Houston plant. As a PLC Maintenance Technician with Rinker Materials, you will contribute to one of the nation's largest manufacturers of reinforced concrete pipe, box, bridge, and other related infrastructure products for stormwater and sanitary applications. You will work become part of a community that prioritizes not only our customers but also values our dedicated and loyal employees. Why apply? • Competitive pay, • Medical and prescription drug coverage, • Dental and vision coverage, • Health savings and flexible spending account, • 401(k) with company match, • Life insurance and disability coverage, • Paid vacation, • Paid holidays, • Growth & Development opportunities, • Employee Discounts, • Mental Health through our Employee Assistance Program Responsibilities: • Install, configure, and maintain PLC systems for batching plants, mixers, and material handling equipment., • Develop and troubleshoot PLC programs to optimize concrete production processes., • Diagnose and repair electrical and automation issues to minimize downtime., • Integrate PLCs with sensors, scales, and control panels for accurate batching and quality control., • Maintain documentation for wiring diagrams, PLC logic, and system updates., • Ensure compliance with safety standards and company operational procedures., • Collaborate with maintenance and production teams to improve system reliability., • Perform routine maintenance and repairs on various equipment and systems., • Conduct inspections to identify issues and determine necessary repairs., • Troubleshoot and diagnose electrical, mechanical, and plumbing problem., • Repair or replace faulty components, such as motors, switches, and valves., • Fabricate parts or components as needed., • Install, maintain, and repair low voltage and high voltage electrical systems., • Collaborate with other team members to complete projects and ensure efficient operations., • Provide excellent customer service by addressing client concerns and resolving maintenance issues in a timely manner. We Require: • Business/technical degree preferred or equivalent work experience. One plus years’ experience in a manufacturing plant., • Working knowledge of large machine operation, construction of infrastructure., • Technical expertise in welding, hydraulics, pneumatics, machining and electronics., • Ability to provide clear and concise verbal instructions along with the ability to listen and ask questions to understand points made by others., • General computer skills, including Microsoft Excel, Word, Outlook and database systems., • Ability to read and apply information from plans, blueprints, work instructions and equipment manuals. Diagnostic problem solving techniques. Detail orientation., • Mathematical skills and mechanical abilities to diagnose and solve problems., • Demonstrated pattern of positive attitude, strong work ethic, and dedication. As you explore the career opportunities at Rinker, you'll discover a wide range of positions. We're always on the lookout for passionate individuals who are committed to Excellence and share our vision of a better future. If you're ready to take the next step in your career and contribute to some of the most exciting infrastructure projects, we invite you to explore our current job openings and start your journey with us. Let's build a better future together. Ready to Apply? · The process is simple. Click on the “apply” button to get started.

Job DescriptionDescription: Multiple Sites Across Greater Houston Full-Time We are seeking a reliable and skilled Maintenance Technician to support daily operations across several office buildings and vehicle storage facilities throughout the Greater Houston area. This role includes lawn care, groundskeeping, and general facility upkeep. The ideal candidate is dependable, knowledgeable, and able to work independently while maintaining a high standard of safety and professionalism. Key Responsibilities • Perform routine maintenance and repairs for office buildings and vehicle storage facilities, • Complete lawn care duties including mowing, edging, trimming, weed control, and debris removal on several properties., • Inspect and maintain equipment, lighting, fencing, gates, and property structures, • Assist with upkeep and organization of yard areas, ensuring they remain clean and safe, • Perform minor plumbing, electrical, and carpentry repairs, • Report facility issues and assist with scheduling professional repairs when necessary, • Maintain company vehicle and equipment in clean, working condition, • Travel between multiple Houston-area locations (company vehicle provided) What We Offer • Company vehicle for work-related travel, • Competitive pay, • Stable full-time schedule, • Opportunities for growth across multiple locations Requirements • 2 years of verifiable driving history, • Legally authorized to work in the United States, • Clean driving record and background check required, • Able to pass a pre-employment drug test and comply with random drug testing, • Experience with lawn care and grounds maintenance, • General knowledge of building maintenance and basic facility repairs, • Handy, dependable, and able to troubleshoot common issues, • Physically able to lift, carry, bend, and work outdoors in various weather conditions, • Strong communication and time-management skills, • Must be reliable, trustworthy, and able to work independently

Job DescriptionCompany Description KIPP Texas Public Schools is a network of 54 public charter, open-enrollment, pre-k-12 schools educating nearly 32,000 students across Austin, Dallas, Houston, and San Antonio. Together with families and communities, our mission is to create joyful, academically excellent schools that prepare students with the skills and confidence to pursue the paths they choose - college, career, and beyond - so they can lead fulfilling lives and build a more just world. Founded in Houston in 1994 and operating as KIPP Texas since 2018, we are looking to hire a diverse team of dynamic, collaborative, and dedicated individuals with an unyielding belief that every child will succeed. Join a Team and Family with an unwavering commitment to creating classrooms, offices, and communities rooted in belongingness, academic success and joy. If you are passionate about joining a mission and values-driven community who wants every child to want to run to school, the KIPP Texas Team and Family is for you! KIPP Public Schools is a national network of public charter schools that prepares students with the skills and confidence to create the future they want for themselves, their communities, and us all. We are a network of 278 schools with nearly 16,500 educators and 190,000 students and alumni. You can see all our job opportunities at . Job Description The Opportunity The Facilities Technician is part of the Facilities Department and is responsible for performing repairs, preventative maintenance, and improvement projects at one or more assigned facilities. The Facilities Technician will work on various systems, including HVAC, electrical, plumbing, carpentry, and grounds maintenance. The Facilities Technician will work under the direction of an experienced Sr. Facilities Technician and/or Campus Facilities Manager, and will have opportunities for on-the-job training and formal professional development. As a key member of the statewide Facilities team, the Facilities Technician will report to the Sr. Facilities Technician. This role furthers the mission of KIPP by providing a clean and safe learning environment for students and faculty. Key Responsibilities • Responsible for maintaining the campus buildings and grounds, • Manage and maintain all building systems: Burglar and fire alarms, elevators, HVAC, irrigation systems, and all other systems., • Responsibilities include basic painting, pest control, lawn care, plumbing and basic electrical repairs., • Execute work orders to high standards of quality and timeliness., • Communicate with school staff and departments to coordinate completion of work orders and setup for campus events., • On call response during and after operating hours., • Perform regular inspections and do whatever it takes to resolve potential problems before they escalate., • Attend meetings, professional development meetings and training session “Continuous Learning”Qualifications Skills and Qualifications • 1-3 years of facilities or maintenance related experience., • Knowledge of building systems and the maintenance and repair thereof., • Expertise in or technical knowledge of HVAC, electrical and/or plumbing systems highly preferred., • Skill in maintaining positive relations with others., • Meticulous attention to detail with an ability to produce high quality work in a dynamic environment., • Verbal communication and interpersonal skills required to work with a broad group of stakeholders with different interests and needs., • Basic computer skills required; experience in Microsoft Outlook and/or facilities work order software preferred., • English fluency is required; Spanish is a plus., • Reliable transportation required (may be required to drive to different facilities or to pick up supplies during the workday)., • The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this position. Reasonable accommodations may be made to enable individuals with disabilities to perform the functions., • Considerable time is spent at a desk using a computer/laptop, • Ability to travel to various locations, travel time approximately rarely Additional Information Compensation and Benefits: The starting salary for this position is $37,000 and placement in the salary range is commensurate upon experience and internal equity. As a full-time KIPP Texas employee you are eligible to participate in all KIPP Texas’ benefit plans. KIPP Texas offers a robust variety of benefits choices with competitive rates, including medical, dental, and vision options, life insurance, and disability plans. KIPP provides equal employment opportunities for all applicants and employees. As an equal opportunity employer, we hire without consideration of race, religion, creed, color, national origin, age, gender, sexual orientation, marital status, veteran status, or disability.

Job Description Maintenance Technician/Mechanic Ingenia Polymers is a world-class, fast-growing, global company looking for people that have the passion to lead, the desire to grow, and the ability to create and deliver solutions for our customers. We offer an environment that is innovative, diverse, intellectually stimulating, and unique. We are searching for exceptional, detailed oriented with strong analytical and interpersonal skills to perform the role of Mechanic/Maintenance Technician, at our Houston or La Porte, Texas US manufacturing facility.  Must be able to work in hot and cold environments for extended periods of time.  Must be able to work from multiple body positions: (kneeling, stooping, bending over, overhead work, working off a ladder, climbing a ladder, lying underneath equipment).  Must be able to bend and lift 50lb and 75lb.  Must have at least 2 years prior maintenance experience as a maintenance industrial maintenance mechanic/industrial maintenance technician.  All maintenance positions here at Ingenia are multi-craft. Meaning a person applying for any maintenance positions with Ingeina and has a heavy mechanical background must be willing to learn and or perform light to medium duty non-energized electrical work as needed. A person with a heavy industrial electrician background must be willing to learn and or perform light to medium duty mechanical work as needed. Absolutely no one will ever be put in an unsafe situation or a situation that they are not comfortable with due to lack of experience.  All applicants must have and maintain a positive attitude, strong work ethic, must be open minded, must be able to work in a fast paced environment, must show the initiative learn the plant’s equipment and process to improve themselves as an Ingenia maintenance mechanic/technician, be willing to learn and or work as a multi-craft maintenance mechanic/technician, must be willing to assist other maintenance mechanics/technicians as needed, work with contractors as needed, perform miscellaneous tasks around the plant facilities as needed, must be able to work 1st, 2nd and 3rd rotating shifts depending on plant needs, be able to work weekends on a rotating shift and be available to respond to callouts for on call weekend coverage that is also a rotating shift.  NCCER certificate as a millwright, NCCER certificate as an industrial electrician or Texas electrical journeyman license is preferred but not required. Additional experience in welding or machining on top of their mechanical or electrical background is a plus.  Applicants with maintenance experience in the plastics industries and or twin screw extrusion is a plus.  Applicants with SAP experience in creating work orders, parts management and timecard entries is a plus.  Applicants with millwright or mechanical backgrounds must have knowledge of using hand tools, power tools, pneumatic tools, calipers, filler dial indicators, plumb bob, squares, levels, protractor, center punch, pry bars, various types of wrenches, pullers. Perform preventive maintenance per schedule. Must have knowledge of removing, rebuilding, installing, maintaining and performing alignments on electric motors, compressors, gearboxes, gear/motors, centrifugal pumps, gear pumps, couplings, sheaves, sprockets, and drive belts, various sizes of roller chain, ball bearings, roller bearings, various types of seals, and various types of gaskets, able to bolt up various sizes of flanges properly. Knowledge of disassembly and reassembly of extruder barrel sections, screw shafts, screw elements is a plus. Must be able to cut, thread and install screw pipe properly. Must be able to locate equipment literature when needed. Must be able to read, interpret and work from equipment, structural and hydraulic drawings. Must be able to document all tasks, fill out and turn in jobs sheets after each job, check and send communication emails, enter documentation on work orders and enter time cards. Knowledge of SAP is a plus. Any additional hydraulic, electrical, welding or machining knowledge/experience is a plus.  Applicants with electrical backgrounds must have knowledge of using hand tools, power tools, knock out set, tubing benders, conduit benders, crimping tools, amp meters, voltage meters, megohmeter, ECT. Must have knowledge of installing, troubleshooting and maintaining motors, motor controls, motor starters, AC and DC control systems, solenoid valves, relays, 120VAC, 277VAC and 460VAC lighting fixtures and lighting circuits. Perform preventive maintenance per schedule. Must have knowledge removing, installing, and wiring single phase and three phase 120VAC, 230VAC, 460VAC, 575VAC, 4160VAC and 700VDC electric motors. Must be able to read, interpret and work from equipment and electrical drawings and schematics. Knowledge of troubleshooting, installing and programming drives/VFD’s and soft starters. Must be able to install rigid, EMT and PVC conduit per NEC code. Must be able to scope small projects with little or no assistance. Must be able to install wiring and properly size cable/wiring as well as properly size raceways/conduit and conduit body fill percentages per NEC code. Knowledge of single phase and three phase electric heaters. Knowledge of various types of instrumentation (pressure, temperature, speed sensors, level sensors, load cells, load cell summing boards, load cell transmitters). Must be able to document all tasks, fill out and turn in jobs sheets after each job, check and send communication emails, enter documentation on work orders and enter time cards. Knowledge of SAP is a plus. Any additional mechanical, hydraulic, welding or machining knowledge/experience is a plus.

Job Description • We have an opening for a full time MAINTENANCE TECHNICIAN position., • Location: Shell - Houston, TX 77002. Note: online applications accepted only., • Schedule: Full time schedule; Monday through Friday, 7:00 am to 4:00 pm. More details upon interview., • Requirement: Prior advanced MEP, hard services, and safety experience is required., • Perks: Overtime opportunities are available!, • Pay Range: $40.00 per hour to $44.00 per hour. ESFM is the corporate Integrated Facilities Management (IFM) division of Compass Group USA and a Keystone member of the International WELL Building Institute (IWBI). We Make Applying Easy! Want to apply to this job via text messaging? Text JOB to 75000 and search requisition ID number 1481351. The advertised program is a conversational recruiting assistant that helps you apply to jobs with Compass Group. Message frequency varies. Message and data rates may apply. Text STOP to opt out or HELP for help. Terms and conditions: Rooted in hospitality, ESFM elevates the workplace experience as the single source of innovative FM solutions that ensure a safe, healthy, and sustainable environment. ESFM’s clients include many household names from Life Science, Technology, Oil & Gas and Manufacturing markets. ESFM self-performs 80% of all IFM solutions provided to clients. Their portfolio of service categories includes Environment, Health & Safety, Facilities Maintenance & Engineering, Sustainability, Janitorial & Industrial Cleaning, Laboratory Support and Workplace solutions. This self-performance model creates a consistent hospitality experience for clients, resulting in higher engagement and productivity from their employees. In 2020, ESFM (formerly Eurest Services) won the George Graves Award for Facility Management Achievement from the International Facilities Management Association (IFMA). Job Summary Summary: Performs a variety of maintenance duties. Essential Duties and Responsibilities May Include: • Maintains, repairs, cleans and operates the plant, shops, mechanical areas, exterior grounds and campus facilities., • Performs basic maintenance duties and repairs as assigned; contacts supervisors, skilled trade vendors or on-call personnel as instructed., • Updates work statuses, timing, and costs of repairs using a variety of company tech systems., • Provides fleet maintenance support including but not limited to welding, plumbing, electrical, food truck kitchen maintenance, driving of vehicles, on campus fleet troubleshooting support, generator fixes, and general maintenance., • Assists in making decisions on all minor and routine repairs; reports major problems to the supervisor, foreman or journeyman., • Cleans sidewalks and parking areas; picks up and disposes of trash, debris, branches and similar items., • Operates electrical and gasoline-powered equipment., • Maintains equipment; performs minor equipment repairs using power and hand tools., • Performs a variety of other unskilled or semi-skilled tasks such as minor carpentry, plumbing, painting, minor electrical work, lamp changing and drywall maintenance., • Responds to emergency problems in the facility; performs emergency repairs as needed., • Maintains logs, performs rounds and completes maintenance work orders, tests and inspections., • Reads, comprehends and transmits complicated detailed instructions verbally and in writing., • Serves as a member of facility's emergency response team., • Performs other duties as assigned. Qualifications May Include: • One year of related experience as a maintenance worker/technician in a similar-sized institution or in a grounds maintenance occupation., • Valid driver's license. Working Conditions: Full-time and part-time positions offer the following benefits to associates: Retirement Plan, Associate Shopping Program, Health and Wellness Programs, Discount Marketplace, Identity Theft Protection, Pet Insurance, Voluntary Benefits, including Critical Illness Insurance, Accident Insurance, Hospital Indemnity Insurance, Legal Services, and Choice Auto and Home Program Full-time positions also offer the following benefits to associates: Medical, Dental, Vision, Life Insurance/AD, Disability Insurance, Commuter Benefits, Employee Assistance Program, Flexible Spending Accounts (FSAs) Associates may also be eligible for paid and/or unpaid time off benefits in accordance with applicable federal, state, and local laws. For positions in Washington State, Maryland, or to be performed Remotely, click here for paid time off benefits information. About Compass Group: Achieving leadership in the foodservice and facility management industry Compass Group is an equal opportunity employer. At Compass, we are committed to treating all Applicants and Associates fairly based on their abilities, achievements, and experience without regard to race, national origin, sex, age, disability, veteran status, sexual orientation, gender identity, or any other classification protected by law. Qualified candidates must be able to perform the essential functions of this position satisfactorily with or without a reasonable accommodation. Disclaimer: this job post is not necessarily an exhaustive list of all essential responsibilities, skills, tasks, or requirements associated with this position. While this is intended to be an accurate reflection of the position posted, the Company reserves the right to modify or change the essential functions of the job based on business necessity. Applications are accepted on an ongoing basis. ESFM maintains a drug-free workplace. ESFM

Job DescriptionDescription: POSITION TITLE: Facilities Maintenance Technician LOCATION: HOPE Clinic - Alief REPORTS TO: Facilities Supervisor EDUCATION: High school diploma or equivalent qualification. Basic HVAC knowledge, building maintenance technology, or a relevant field is preferred. WORK EXPERIENCE: A minimum of 2 years’ experience in a similar role. SALARY RANGE: $17 - $20/ Hour FLSA STATUS: Non-Exempt POSITION TYPE: Full-Time LANGUAGE: Fluent in English; Bilingual in English and Spanish, Arabic, Burmese, Chinese or other languages is required HOPE Clinic provides equal employment opportunities to all employees and applicants for employment and prohibits discrimination and harassment of any type without regard to race, color, religion, age, sex, national origin, disability status, genetics, protected veteran status, sexual orientation, gender identity or expression, or any other characteristic protected by federal, state, or local laws. JOB SUMMARY: Facilities Maintenance Technician will perform basic and routine facilities maintenance, construction, and repair tasks according to the service, quality, and safety standards; to oversee the general upkeep of the building and its infrastructure. Their role is to maintain building operations and ensure that the facilities are always safe and functional. Maintenance Technicians can manage technical repairs and inspect HVAC systems alongside aesthetic maintenance like applying new coats of paint and trimming the bushes and grass on facility grounds. They manage routine maintenance and emergency repairs to prevent and resolve safety or comfort issues. MAJOR DUTIES & RESPONSIBILITIES: • Performs a variety of routine semi-skilled maintenance for HOPE Clinic facilities, including, but not limited to, carpentry, painting, plumbing, and electrical trades work;, • Ensures that facilities are available for use and consistently maintained in a safe and clean condition;, • Conduct routine inspections and maintenance of heating, electrical, and air conditioning equipment; replaces filters; identifies and reports more complex maintenance needs to supervisor;, • Assist in developing and implementing preventative maintenance procedures, as needed;, • Plan and schedule repairs and maintenance as needed;, • Assists with structural pest control measures as needed;, • Maintain records and logs of daily activities;, • Assists with HOPE Clinic special events, as needed;, • Perform routine maintenance around the building such as fixing structural damage, for example, windows, doors, wall repairs, etc. as needed;, • Be familiar with the building’s HVAC system and schedule maintenance to keep climate control in the facility functioning properly when needed;, • Use tools and/or equipment to perform the job in an efficient, effective, and safe manner;, • Assemble, repair, maintain, and move furniture, such as desks, cabinets, tables, chairs, shelves, and related fittings and fixtures as needed;, • Assist with meeting space set-up and break-down as needed;, • Inspect facilities and grounds for safety and security; identifies and reports hazardous conditions and facility maintenance needs to supervisor;, • Follow safe working practices and makes appropriate use of related safety equipment as required;, • Perform custodial tasks as needed;, • Attend on-site/off-site community engagement activities, clinic events, and/or training as needed;, • Perform other duties as assigned to support HOPE Clinic’s Mission, Vision, and Values; Requirements: QUALIFICATION REQUIREMENTS: • In-depth knowledge of electrical and hydraulic systems;, • Advanced understanding of general maintenance procedures and techniques;, • Physically capable and available to work overtime including weekends, public holidays, and evenings;, • Effective problem-solving abilities;, • Excellent written and verbal communication skills;, • Must be well-organized and can prioritize tasks;, • Attention to detail to ensure that all jobs are completed in an exemplary manner and any potential hazards or warning signs of problems are not overlooked;, • Physical stamina to handle a full shift of being active and working on the building;, • Interpersonal skills to interact with employees or residents of the building in a pleasant manner;, • Carpentry ability to handle basic repairs around the building. EDUCATION and/or EXPERIENCE: • High school diploma or equivalent qualification;, • Basic understanding of building HVAC equipment to retain operational efficiency;, • Electrical wiring capabilities to manage problems with the building’s electricity;, • Plumbing knowledge to address leaks, clogs, or other drainage problems; OTHER SKILLS and ABILITIES: • Bilingual (Vietnamese, Chinese, Arabic, and/or Spanish with English) is preferred., • Above average skills in language ability as well as public speaking and writing., • Must have good transportation and a valid Texas Driver’s license and insurance.

Job Description Powell is an engineer to order manufacturer of switchgear. We are seeking an experienced Senior Industrial Maintenance Technician to join our team at our facility located in Houston, TX, 77075. Powell is an engineer to order manufacturer of switchgear. We are seeking an experienced Industrial Maintenance Technician to join our team. The Maintenance Technician will perform routine and preventative maintenance and repair manufacturing and fabrication equipment, including CNC Laser Cutting and CNC Turret Punch Press equipment, Robotic Welding equipment, Automated Material Handling equipment, and Automated Powder Coat Painting equipment. Multiple shifts available! Click on link(s) below to apply directly to company website! 2nd Shift: Mon-Thurs 2:00pm-12:45am Apply here: Industrial Maintenance Technician - Powell Career Site Careers 3rd Shift: Mon-Fri 10:00pm-6:30am Apply here: Maintenance Technician 3rd Shift - Powell Career Site Careers Essential Responsibilities * Reading assembly drawings, schematics, and equipment layouts. * Maintaining, diagnosing, troubleshooting, and repairing electrical circuits. (occasional) * Maintaining, diagnosing, troubleshooting, and replacing control devices. * Maintaining, diagnosing, troubleshooting, and replacing hydraulic equipment, circuits and components. * Maintaining, diagnosing, troubleshooting, and replacing pneumatic systems. * Must be able to look up parts from equipment drawings, schematics and parts lists. * Must be able to understand our Computerized Maintenance Management System (CMMS) and be able to conform to our work order procedures. * Adhering to all plant safety and environmental guidelines, policies and procedures. * Requires working with a wide variety of other job groups and involves working around traffic, heights, electricity, hydraulics, and heavy equipment including moving parts. * Assisting crew members and working in a team environment. Minimum Qualifications *Required Experience is Proportionate with the selected job level: The Industrial Maintenance Tech level 1 * The Senior Industrial Maintenance Tech Skills, Abilities & Other Requirements * Must be able to efficiently and effectively use a computer, CMMS and related software related to record-keeping and machine troubleshooting/maintenance. * Strong mathematical ability is essential. * Must be self-driven and able to drive organizational change. * Must work well in a team environment. * Must be willing to learn and perform with minimal direction. * Must have mechanical and electrical knowledge. * Must have basic computer skills: Microsoft Suite * Must be fluent in English with good written and verbal communication skills. * Must have manual dexterity. * Ability of strong mechanical aptitude. * Ability to read mechanical and electrical schematics. * Ability to troubleshoot and repair low voltage (12 v DC) – high voltage (480 v AC 3 Phase) electrical systems. * Ability to visually and mentally make priority decisions and independent judgment calls based on the situation at hand. * Ability to work long hours and weekends. * Ability to operate hand and power tools, industrial machines, digital cameras, phones, scanners, tools, and controls in a safe manner. * Ability to work and concentrate in a noisy environment. Working & Environmental Conditions * Safety sensitive position in a temperature-controlled manufacturing or industrial environment with occasional outside activities. * Required to wear personal protective equipment (PPE) (i.e., safety shoes, hard hats, bump caps, safety glasses, hearing protection, safety harnesses as required) and respirators when required. * Must be able to work from all types of ladders (step ladders, "A" frame ladders, etc.) * Specific vision abilities required include close vision, distance vision, color perception, peripheral vision, depth perception, and ability to adjust focus, hand-eye coordination. * Working at heights usually no higher than 20 feet in the air on an elevated structure using proper lift equipment and Fall Protection Equipment. * Able to maintain body equilibrium and agility to prevent falling when walking, standing, crouching, ascending or descending stairs or step ladders. * Bending the body at the waist, the legs at the knees, and extending arms and hands in any direction * Continuous standing and walking * Able to use upper extremities frequently, work with both arms above shoulders and use both arms at full length frequently. * Must be able to meet physical lifting demand up to 50lbs. * Frequent use of hand tools and power tools More Information This job description outlines the essential functions of the job and does not contain a comprehensive list of all possible responsibilities, tasks, and duties. You should be proficient in: • Mechanical Troubleshooting Skills, • Pneumatics Experience, • 120/208/240/480 Voltage Systems, • Hydraulics Experience, • Electrical Troubleshooting

Job DescriptionDescription: PRIMARY FUNCTION Repairs and maintains, in accordance with diagrams, sketches, operation manuals, and manufacturer’s specifications, any mechanical & electrical equipment, such as the EVG & Newcor welders, all other production equipment, welding machines, cranes, presses, forklifts, conveyors, compressors, etc. Required Knowledge/Education • High school education. 2-year associate degree program at community or technical college desired., • Vocational school courses in mathematics and geometry, blueprint reading, mechanical drawing, metalworking, drafting and quality and safety practices are highly recommended., • Thorough knowledge of hydraulic and fluid systems, advanced electrical circuitry, and competent knowledge of PLC control systems., • Thorough knowledge of blueprints, repair manuals, and parts catalogs., • Primary responsibilities of Maintenance Multicraft Electrical Technician include repair, preventive maintenance, and installation of new machinery., • Repair and maintain electrical and mechanical equipment, such as engines, motors, pneumatic tools, conveyor systems, computer-controlled systems, and production machines and equipment., • Adjust and calibrate automated manufacturing equipment., • Following a checklist, they may inspect drives, motors, and belts, check fluid levels, replace filters, and perform other maintenance actions. Maintenance and repair workers keep records of their work., • Troubleshooting/diagnosing problems and determining the best way to correct them., • May set up and/or operate plant production type of equipment at any time for the amount of time required to perform work of non-production nature necessary to the performance of maintenance duties such as saws, lift trucks, etc., • Perform routine preventive maintenance and ensure that machines continue to run smoothly, operate efficiently, and the physical condition does not deteriorate., • Cleaning and lubricating machinery, performing basic diagnostic tests, checking performance, and testing damaged machine parts to determine whether major repairs are necessary., • Performs job functions using safe work practices; required to adhere to all safety rules and regulations as well as participate in the overall safety effort., • Obtain supplies and repair parts from distributors or storerooms., • Designs and or creates circuit diagrams and or specifications & instructions for users., • Analyzes jobs and/or diagrams to locate or install circuits and equipment, to determine material or replacement needs, and to select a logical approach to “troubleshooting”., • Plans and performs work requiring a thorough working knowledge of electronic and electrical principles., • Traces and tests circuits and equipment for faulty operation., • Plans and performs work requiring a working knowledge of electrical principles, principles of operation and application of equipment., • Dismantles, inspects, repairs, adjusts and/or replace faulty parts or wiring as required. Reassembles, tests and adjusts equipment for safe and proper operation., • Installation of conduit, fittings, switches, controls and fixtures., • Performs work to conform to existing codes where required, as instructed. This job description has been designed to indicate the general nature and level of work performed by employees within this classification. It is not intended to contain or be interpreted as a comprehensive inventory of all duties, responsibilities, and qualifications required of employees assigned to this position. IKG USA, LLC is an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability or veteran status. Requirements:

Job Description Pay starting at $18.00/hour At The Shores at Clear Lake, we are dedicated to enriching the lives of our residents through compassionate care and unwavering support. We are seeking individuals who share our commitment to creating exceptional living experiences and who are eager to contribute to a supportive, family-like atmosphere. When you join The Shores at Clear Lake, you become an integral part of a team that values making a positive difference every single day. If you are driven by empathy and excellence, we invite you to bring your talents to our welcoming community. Full-time benefits include: • PTO (Paid Time Off) and Holiday Pay: Take advantage of paid time off to maintain a healthy work-life balance., • Daily pay: Get paid daily, providing you with financial flexibility and control over your earnings., • Health/Dental Insurance, • 401K with employer match: Plan for your financial future with our 401k program., • Life Insurance: Company paid life insurance, • Short and long-term disability: Financial security while you recover from an injury that puts you out of work, • Referral Bonuses: Refer qualified candidates and earn rewards, • Tuition Reimbursement: Invest in your education with our support Community buildings and grounds are the physical representation of our commitment to the health and happiness of our residents. It is the responsibility of the Maintenance Technician to ensure the safety and upkeep of the building, equipment, and the grounds. Additional responsibilities of the Maintenance Technician include the general maintenance operations for exterior and interior of the facility which includes electrical, refrigeration, plumbing, heating and cooling, structural, grounds care, and parking area. The Maintenance Technician renders quality maintenance services which meet resident needs and services and enhance safety. The Maintenance Technician reports to the Maintenance Director. Essential Functions of the Maintenance Technician • Ensures maintenance/repair service level is maintained to include electrical, plumbing, refrigeration, heating and cooling, structural facilities and grounds, and parking areas., • Ensures timely response to requests for services by residents, associates, and management to include repair or replacement of all interior fixtures and furnishings., • Monitors the level and quality of services performed by outside contractors in accordance to all lease agreements, service contracts, and warranties., • Maintains accurate records to include serial numbers of all equipment., • Ensures implementations of ongoing preventive maintenance and energy conservation programs., • Maintains emergency procedures and equipment and assists with the implementation of all emergency procedures for the safety of all guests and associates., • Maintains a clean and orderly work environment free of hazards., • Maintains adequate inventory of tools and supplies for maximum associate productivity., • Cleans light fixtures and replaces designated light bulbs., • Cleans the outside of resident apartment doors., • Operates, maintains, and cleans housekeeping equipment such as vacuum cleaner, buffer, shampoo machine, and mop unit., • Performs heavy cleaning and moving of furniture and fixtures in apartments and throughout the community., • Manages/performs apartment turn-over duties in assigned resident apartments., • Complies with community policies and procedures., • Team player who is collaborative and provides assistance to other associates to contribute to the smooth operation of the department and community., • Demonstrates safe and proper techniques for chemical/cleaning solutions., • Demonstrates knowledge of emergency and safety procedures., • Demonstrates knowledge of proper infection control technique including cleaning, storage, and food handling., • Supports and participates in the resident centered activity programs., • Participates in projects or committees as assigned., • Attends all associate meetings including in-service education and associate functions as requested by supervisor., • High School Diploma or GED required., • Minimum two to three years of experience in maintenance, carpentry, plumbing, electrical or HVAC, and repair of minor equipment., • The ability to speak, read, and write in English., • Must be able to push loaded cart and use vacuum cleaner, buffer, and carpet cleaning machines., • Ability to lift at least 40 pounds., • Must be able to relate to residents and staff in a courteous and diplomatic manner under all circumstances., • Must be able to work flexible hours., • Must be in good physical health and free of communicable disease., • Successful criminal background check and drug testing required., • Mechanical aptitude., • Knowledge of proper cleaning materials and their use., • Experience in maintenance and repair of minor equipment., • Must be friendly and have excellent people skills., • Physical requirements include bending, standing, lifting, stooping, sitting, carrying, stretching, and walking., • Must have manual dexterity to operate equipment., • Ability to get along with others.

Job DescriptionDescription: We are ERock! Enchanted Rock is a leader and innovator of Electrical Resiliency-As-A-Service. Our advanced dual-purpose microgrids protect companies, critical infrastructure, and communities from unexpected power outages, ensuring business continuity and civic durability. Enchanted Rock’s dual-purpose microgrids use natural gas and renewable natural gas (RNG) to drive the nation’s most dependable microgrids — all while producing significantly lower to zero carbon emissions than traditional diesel backup generators. Powered by GraniteEcosystem™, our revolutionary software system, Enchanted Rock solutions provide 24/7/365 monitoring, optimization, and forecasts to enable worry-free, reliable power for businesses. The Enchanted Rock solution brings together patented technologies, advanced dual-purpose microgrid designs and integrated end-to-end services. The Power is On and we keep it on. What you’ll do… We are looking for a skilled Electrical Maintenance Technician with experience in low-voltage and 3-phase power systems, generator maintenance, and field-based troubleshooting. This position requires hands-on work in the field—outdoors, in all weather—maintaining and repairing switchgear, generators, circuit breakers, and 24V control cabinets. You will work remotely in the field at the location specified in the job posting and will report directly to the Area Manager for that region. You’ll make an impact by: · Performing routine electrical maintenance on generators, switchgear, circuit breakers, and 24V control cabinets. · Troubleshooting and repairing 3-phase power systems, wiring, and generator controls. · Diagnosing faults in electrical panels, motor controls, and 24V systems. · Working with mechanical teams on equipment swaps and alternator repairs. · Using test equipment like multimeters and meggers to validate system function. · Accurately logging work orders and tracking time via mobile tools and apps. · Following all safety procedures and company policies. · Safely prepare, operate, and maintain a motor vehicle for purposes of conduction company business. Requirements: You’ll sweep us off our feet if you: · Demonstrate profound knowledge of electrical power distribution and control systems design. · Possess mechanical systems experience. · Have Technical hands-on Experience or equivalent relevant experience. · Have hands-on experience with PLC systems (Deep Sea Electronics and AcSELerator). · Exhibit a solid understanding of the National Electrical Code (NEC). What you’ll need: · 3+ years of electrical maintenance experience—preferably with generators, switchgear, or 24V controls. · Proficiency in generator theory, AC/DC circuit theory, protection relays, and electrical troubleshooting practices. · Ability to interpret Electrical and Mechanical schematics. · Strong multitasking capabilities to manage multiple projects. · Excellent written and verbal communication skills. · Must possess valid driver’s license with acceptable driving record; successfully pass Motor Vehicle Record (MVR) check to ensure compliance with company standards and safe driving practices. · Attention to Detail- Is thorough when performing work and conscientious about attending to detail · Computer skills- Uses computers, software applications, databases and automated systems to accomplish work · Flexibility-Technician have a rotating on call schedule. Must have availability to work evenings, weekends and/or holidays. · Must be able to be on your feet for multiple hours a day. · Must be able to climb ladders and lift 50 lbs safely · Integrity- Work efficiently and effectively when with or without supervision. Machines & Equipment · Hands-on generator maintenance experience. · Familiarity with ATS (Automatic Transfer Switches), power meters, and backup systems. · Prior US Navy Electrical (EMN or ETN) experience a plus. Your Rewards! · Medical, Dental, Vision, and Prescription Drug Insurance · Company-Paid Life Insurance · Disability Insurance · Paid Family Leave · Flexible Spending Account (FSA) · Healthh Savings Account (HSA) · Wellness Programs and Incentives · 401(k) Retirement Plan & Company Match · Paid Time Off – Sick & Vacation Time · Paid Holidays · Hybrid Work Schedule! · Cool Open-Office Concept Do you have what it takes to join the Enchanted Rock team? Send us your resume today. Be yourself and keep it useful, funny, and cool! The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. Enchanted Rock is committed to creating a diverse environment and is proud to be an equal opportunity employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, gender, gender identity or expression, sexual orientation, national origin, genetics, disability, age, or veteran status. At Enchanted Rock, we embrace diversity, including all the unique characteristics that make us human: race, age, sexual orientation, gender identity, religion, disability, and education — to name a few. We understand and recognize that diverse backgrounds and perspectives strengthen our teams and our business. The foundation of our diversity efforts is closely tied to our core values specifically our value of “The Team” which includes “Mutual Respect, Openness, and Honesty.”

Job DescriptionSalary: Apave America offers an employee-centric company culture, competitive pay, and opportunities to build a rewarding career full of growth & advancement. Position Overview: The NDT Level II (Non-Destructive Testing) Technician is a skilled professional who independently performs inspections on materials and components using various NDT methods like Radiography Testing (RT), Ultrasonic Thickness Testing (UTT), Magnetic Particle Testing (MT), or Penetrant Testing (PT), to detect flaws or defects while adhering to established standards and procedures, interpreting results, and documenting findings in detailed reports; essentially acting as a quality control inspector with advanced NDT knowledge and certification to work autonomously on complex projects. Key responsibilities of a Level II NDT Technician: Requirements for a Level II NDT Technician: Work environments where Level II NDT Technicians are employed: • Manufacturing facilities, • Oil and gas industry, • Aerospace industry, • Construction industry, • Power generation plants, • Pipeline companies Required Skills and Experience: • High School Diploma or equivalent is required, • Must be at least eighteen (18) years of age, • SNT Level II certification in one or more of the following methods MT/PT/UTT/RT/PMI/ISQ required, • Current SPRAT and/or IRATA Rope Access certification will be considered an asset, • Refinery experience is considered a plus, • Capable of training NDT assistants, • Valid Drivers License and pre-access drug and alcohol testing required, • Pre-employment background checks will be required Work Conditions: • Field duties require indoor and outdoor work in diverse industrial environments with varying climate conditions, • Interaction with other crew employees, as well as supervisors, client personnel and a wide range of stakeholders, • Working in a plant and/or shop area around production machinery with extreme noise levels, • Work from various levels of heights and/or confined spaces for long periods of time, • Wear safety equipment as required by the safety department for personal protection (PPE) Physical and Mental Requirements: • Ability to lift, move, and carry objects weighing 75lbs. or greater, • Must be able to walk, sit, stand, bend, reach, and climb, • Must be able to work in confined spaces and at heights, including climbing tanks, ladders, scaffolding, towers, piping systems, catwalks, structural steel, and wind turbines, • Perform physical activities that require considerable use of your arms and legs and moving your whole body, such as climbing, lifting, balancing, walking and stooping, • Working extended hours and standing for extended periods of time, • Work in indoor and outdoor environments in conditions of extreme heat and/or cold, • Work in and near industrial hazards, • Must be able to walk and climb except when performing non-field duties, • Remain consistently active throughout shift, • Sufficient clarity of speech and hearing and other communication capabilities, with or without reasonable accommodation, which permits the employee to communicate effectively, • Sufficient vision (close vision and distance vision) or other powers of observation, with or without reasonable accommodation, which permits the employee to investigate, • Sufficient manual dexterity, with or without reasonable accommodation, which permits the employee to perform routine in-field or office duties, • Sufficient personal mobility and physical reflexes, with or without reasonable accommodation, which permits the employee to perform routine in-field or office duties and travel to off-site locations, • Must be able to wear safety equipment as required by the safety department for personal protection (PPE), • Ability to maintain focus and multitask effectively, • Exhibit sensible and responsible behavior, • Ability to work autonomously or within a team environment Per-Diem/Travel: To be considered for per-diem and travel pay, you must provide proof of residence documentation as requested by the client. The name and address on these documents must match. Per-diem and travel pay are subject to additional requirements, which will be listed in the offer letter at the time of hire, along with the site location. NOTE: To be considered, applicants must be able to provide documentation of current or previous certifications, as well as all classroom and/or on-the-job training (OJT) hours required for certification. * Apave America Inc. is an equal opportunity employer that prohibits discrimination and harassment based on race, color, sex, religion, sexual orientation, national origin, disability, and other protected characteristics. * We make hiring decisions based solely on qualifications, merit, and business needs. We are committed to providing an environment of mutual respect where equal employment opportunities are available to all applicants and employees.

Job DescriptionSalary: Apave America offers an employee-centric company culture, competitive pay, full benefits, and opportunities to build a rewarding career full of growth & advancement. Position Overview: The NDT Level II (Non-Destructive Testing) Technician is a skilled professional who independently performs inspections on materials and components using various NDT methods like Radiography Testing (RT), Ultrasonic Thickness Testing (UTT), Magnetic Particle Testing (MT), or Penetrant Testing (PT), to detect flaws or defects while adhering to established standards and procedures, interpreting results, and documenting findings in detailed reports; essentially acting as a quality control inspector with advanced NDT knowledge and certification to work autonomously on complex projects. Key responsibilities of a Level II NDT Technician: Requirements for a Level II NDT Technician: Work environments where Level II NDT Technicians are employed: • Manufacturing facilities, • Oil and gas industry, • Aerospace industry, • Construction industry, • Power generation plants, • Pipeline companies Required Skills and Experience: • High School Diploma or equivalent is required, • Must be at least eighteen (18) years of age, • SNT Level II certification in one or more of the following methods MT/PT/UTT/RT/PMI/ISQ required, • Current SPRAT and/or IRATA Rope Access certification will be considered an asset, • Refinery experience is considered a plus, • Capable of training NDT assistants, • Valid Drivers License and pre-access drug and alcohol testing required, • Pre-employment background checks will be required, • Valid TWIC Card and/or knowledge of PIN to TWIC Card may be required for some sites/location, • Ability and willingness to travel to multiple job sites may be required, sometimes with little notice Work Conditions: • Field duties require indoor and outdoor work in diverse industrial environments with varying climate conditions, • Interaction with other crew employees, as well as supervisors, client personnel and a wide range of stakeholders, • Working in a plant and/or shop area around production machinery with extreme noise levels, • Work from various levels of heights and/or confined spaces for long periods of time, • Wear safety equipment as required by the safety department for personal protection (PPE) Physical and Mental Requirements: • Ability to lift, move, and carry objects weighing 75lbs. or greater, • Must be able to walk, sit, stand, bend, reach, and climb, • Must be able to work in confined spaces and at heights, including climbing tanks, ladders, scaffolding, towers, piping systems, catwalks, structural steel, and wind turbines, • Perform physical activities that require considerable use of your arms and legs and moving your whole body, such as climbing, lifting, balancing, walking and stooping, • Working extended hours and standing for extended periods of time, • Work in indoor and outdoor environments in conditions of extreme heat and/or cold, • Work in and near industrial hazards, • Must be able to walk and climb except when performing non-field duties, • Remain consistently active throughout shift, • Sufficient clarity of speech and hearing and other communication capabilities, with or without reasonable accommodation, which permits the employee to communicate effectively, • Sufficient vision (close vision and distance vision) or other powers of observation, with or without reasonable accommodation, which permits the employee to investigate, • Sufficient manual dexterity, with or without reasonable accommodation, which permits the employee to perform routine in-field or office duties, • Sufficient personal mobility and physical reflexes, with or without reasonable accommodation, which permits the employee to perform routine in-field or office duties and travel to off-site locations, • Must be able to wear safety equipment as required by the safety department for personal protection (PPE), • Ability to maintain focus and multitask effectively, • Exhibit sensible and responsible behavior, • Ability to work autonomously or within a team environment Benefits: • Dental Insurance, • Vision Insurance, • Health Insurance, • Paid Time Off, • 401(K) W/Matching, • Flexible Spending Account, • Health Savings Account NOTE: To be considered, applicants must be able to provide documentation of current or previous certifications, as well as all classroom and/or on-the-job training (OJT) hours required for certification. * Apave America Inc. is an equal opportunity employer that prohibits discrimination and harassment based on race, color, sex, religion, sexual orientation, national origin, disability, and other protected characteristics. * We make hiring decisions based solely on qualifications, merit, and business needs. We are committed to providing an environment of mutual respect where equal employment opportunities are available to all applicants and employees.

Job DescriptionAllegiance Crane & Equipment is a top employer in the Crane Industry! We are looking for an Area Regional QSHE Manager that is a hard-working team player to join our team for our Houston, TX Gulf Coast region. We offer a strong work environment & team culture! Our team members enjoy a very competitive benefits package including top rate pay, medical, dental, vision, 401K w/company match, vacation, and more! The QSHE Manager is responsible for the leadership, coordination, and execution of health and safety programs across multiple operational sites within an assigned region. This role supports the organization's strategic safety goals by ensuring regulatory compliance, reducing risk, mentoring local SHE teams, and promoting a culture of continuous improvement. The Regional Safety Manager acts as a liaison between corporate leadership and site-level safety personnel, ensuring alignment in policy, training, and performance metrics. Essential Responsibilities • Implement and monitor regional SHE strategies aligned with corporate objectives and safety vision., • Provide leadership, coaching, and technical support to site-level safety managers and professionals., • Ensure compliance with OSHA, EPA, NFPA, ANSI, and other applicable standards., • Conduct regional audits, inspections, and risk assessments to identify hazards and drive corrective actions., • Support and validate incident investigations and corrective action implementation., • Lead safety training and engagement programs across all sites within the region., • Track safety performance metrics and provide regular updates to senior leadership., • Support implementation of Quality Management system., • Coordinate emergency response planning and crisis management drills., • Drive best practice sharing across sites and foster consistency in safety program execution., • BS in Occupational Health and Safety or equivalent, • Minimum-Construction Health & Safety Technician (CHST), • ASP or GSP preferred., • OSHA 30-Hour Certification – Required, • Minimum 7–10 years of progressive SHE experience, with at least 3 years in a multi-site or regional management capacity, • Strong knowledge of safety programs in industries such as petrochemical refinery, construction, utilities, or services, • Proven experience in training, audits, root cause analysis, and hazard control implementation, • Strong crane background a plus. Benefits • 401(k), • 401(k) matching, • Dental insurance, • Flexible spending account, • Health insurance, • Life insurance, • Paid time off, • Vision insuranceAllegiance Crane & Equipment is an EEO Employer. Powered by JazzHR eyb6S5JWpp

Job DescriptionJoin Our Dynamic Team at Custom Air Products & Services, Inc. Are you a skilled HVAC professional with a commitment to excellence and a desire to be part of a dynamic team? At Custom Air Products & Services, Inc., we take pride in our commitment to providing top-notch service and tailored installations of commercial and industrial HVAC systems in the Houston and surrounding areas. If you are dedicated, skilled, and eager to contribute to our continued success, we encourage you to apply and become a key player in our top-quality service delivery and customized installations. Job Description: Reporting to and under the general direction and training of their Supervisor, the HVAC Testing Technician plays a crucial role in performing all aspects of job responsibilities in a safe, satisfactory, and timely manner to meet scheduled deadlines. The successful candidate will thrive in a fast-paced environment, demonstrating reliability, professionalism, and a keen ability to learn. The primary role involves field commissioning of units and/or systems, conducting owner FAT demonstrations off-site, and traveling for startup, FAT, commissioning, warranty service, and repair. The HVAC Testing Technician will also actively participate in the testing team. Key Responsibilities: • Lead and execute all phases of work, coordinating with other disciplines/departments, to start and test units and systems, ensuring trouble-free reliable operation., • Conduct pre-startup work, including reviewing design engineering drawings, bill of materials, various checklists, and loading PLC or VFD programs., • Check and document the integrity of all components and their installation before connecting power and energizing each unit., • Document and perform various checks upon energizing equipment, including motor rotational check, belt and alignment checks, refrigerant charge optimization, and control sequences of operation., • Proactively identify and resolve errors, omissions, and deficiencies before Quality Control and/or field commissioning processes., • Provide technical assistance to operators and owners regarding the installation, startup, and operation of Factory HVAC systems., • Assist in training other technicians and staff when applicable., • Prepare records and reports describing procedures, actions taken, and recommended solutions., • Submit requests for supplies and equipment., • Respond to emergency warranty service repair requests., • Enforce sound safety and housekeeping practices, following safety rules/procedures., • Review safety procedures before beginning each job with known hazards., • Establish good relationships and credibility with customers., • Manage time, priorities, and expenses effectively., • Drive and safely maintain an assigned Company vehicle, and travel to the site as assigned. Special Skills: • Ability to work safely with live rotating equipment and high voltage up to 600 volts., • Familiarity with Class 1 Div 2 standards and work practices regarding HVAC systems (preferred)., • Knowledge of Industrial Plant work practices regarding Safety, LOTO, work permitting, etc. (preferred)., • Physical fitness for activities associated with the job, including occasional lifting and moving up to 65 pounds individually and greater weights with assistance, bending, stretching, stooping, climbing, and other physical acts., • Overnight and extended travel required. Certification Required: • EPA Certification., • Texas HVAC Technician Registration., • TWIC preferred., • Five plus years in the HVAC Industry., • Commercial or Industrial HVAC experience., • Knowledge of controls., • Reading and interpreting electrical wiring diagrams for troubleshooting and identifying errors and omissions. We value our team members and offer competitive benefits, including: • 401K with company match, • Medical insurance, • Dental insurance, • Vision plan, • Prescription plan, • Health savings account, • Life insurance and disability coverage, • Paid Time Off, • Referral Program Join Us: If you have a strong work ethic, a commitment to excellence, and the desire to be part of a winning team, we invite you to apply and embark on a rewarding career with Custom Air Products & Services, Inc. Be part of a company that values your contributions and invests in your future. Apply now to take your career to new heights! Connect with Us: To learn more about Custom Air Products & Services, Inc., visit us on: • Facebook, • Twitter, • LinkedIn, • Our Website

Job Description Industrial Maintenance Technician At WhiteWater Express, we are more than just a car wash; we are a company built on respect, communication, and a passion for people. Our dedicated team members are leaders within the company, and we believe that personal growth is the key to our organizational success. If you are a self-starter, motivated, and ready to take on new challenges, we want you to succeed with us, as a part of a rapidly growing business. Position Overview The Industrial Maintenance Technician is responsible for ensuring the proper operation, maintenance, and repair of industrial equipment and machinery. The technician will perform preventive maintenance, diagnose issues, and implement solutions to keep production running smoothly. Key Responsibilities • Travel to various locations for the repair and installation of car wash equipment., • Diagnose and address equipment issues, ensuring efficient functionality., • Perform preventive maintenance alongside store teams., • Keep operations leadership informed with regular updates on repair progress., • Install, maintain, and troubleshoot mechanical and electrical components in the car wash tunnel and equipment room., • 3+ years of experience with mechanical and electrical expertise., • Electrical Systems:, • 480V/230V 3-phase MCC troubleshooting and repair., • VFD troubleshooting and installation., • Low voltage control systems., • Mechanical Systems:, • Hydraulic and pneumatic repair and troubleshooting., • Air compressor repair and maintenance., • Chain drive conveyor maintenance and repair., • Strong analytical skills with the ability to work independently and diagnose issues efficiently., • Willingness to tackle new and exciting challenges daily., • Must be able to lift 50 pounds., • Ability to work in outdoor, all-weather, and rapidly changing environments., • Comfortable coordinating efforts with contractors and vendors., • Must be willing to travel to store locations to complete daily tasks., • A team player who thrives on working with others to achieve results., • Brings professionalism, a strong work ethic, and integrity to the role., • Available for a rotating on-call schedule, including after-hours service needs., • Must have reliable transportation., • Must pass a background check and MVR check., • Competitive Compensation in Base and Bonus Potential, • Comprehensive Health Benefits (Medical, Dental & Vision), • Pet Insurance available for your furry friends healthy and happy, • PTO starts on day 1 because we believe in a work-life balance., • Paid Time Off in addition to Company Paid Holidays, • 401(k) Retirement Plan with Company Match, • Company-Paid Life Insurance, • Pathways to Advancement, • Overtime is available Powered by JazzHR aCRyXkFIfQ

Job Description Kobus - Pasadena TX Role Summary/Purpose: The Product Support Technician provides technical assistance and support to customers and internal teams regarding product functionality, installation, maintenance, and troubleshooting. The technician also executes product testing, training users, and updating technical documentation or knowledge bases. Essential Responsibilities: • Machine Assembly & Repair, • Assemble, install, and commission new machines to company standards., • Diagnose, troubleshoot, and repair customer machines and equipment in a timely and professional manner., • Perform preventative maintenance to ensure optimal machine performance and longevity., • Customer Support & Training, • Travel to deliver hands-on training to customers on the proper use and maintenance of Kobus equipment., • Conduct on-site product demonstrations and practical trials for potential customers., • Provide technical guidance and support to ensure customer satisfaction and successful machine operation., • Reporting & Communication, • Report on ground and site conditions to assist with technical evaluation and sales planning., • Document all service activities, including customer interactions, issues encountered, and resolutions provided., • Escalate complex or recurring problems to management for further analysis., • Sales & Promotion, • Actively promote Kobus consumables and complementary products during customer visits., • Support sales initiatives by identifying opportunities for additional product or service offerings., • Logistics & Coordination, • Arrange and manage travel logistics in line with customer schedules and project requirements., • Submit accurate and timely expense reports in accordance with company policy., • Inventory & Equipment Management, • Maintain appropriate stock levels of parts, tools, and consumables., • Keep the warehouse clean, organized, and compliant with company standards., • Ensure proper care, maintenance, and record-keeping for company vehicles, tools, and equipment., • Safety & Compliance, • Adhere to all company safety procedures, both on-site and at customer locations., • Ensure compliance with relevant health, safety, and environmental regulations., • Quality Assurance & Continuous Improvement, • Ensure all work—assembly, repair, testing, and documentation—meets company quality standards and customer expectations., • Follow and help improve quality control processes and inspection checklists., • Identify and report recurring issues, contributing to product and process improvements., • Participate in root cause analysis and corrective action efforts to reduce repeat issues., • Maintain accuracy and attention to detail in all service records, ensuring traceability and accountability., • Support continuous improvement initiatives to enhance reliability, efficiency, and customer satisfaction., • Assist in Continuous Improvement projects for the entire Kobus business as it grows and expands., • Professionalism & Personal Development, • Maintain an organized, proactive, and safety-conscious mindset while on the shop floor and in the field., • Exhibit strong self-motivation and a willingness to learn new technologies and processes., • Thrive in a fast-paced, dynamic environment while delivering high-quality customer service. Qualifications/Requirements: • Minimum of 3 years of hands-on mechanical experience, preferably within the water or gas industry., • Strong mechanical aptitude with the ability to diagnose, repair, and maintain complex equipment., • Willingness and ability to travel within the USA and internationally for assignments typically lasting 2–5 days at a time (approximately 50–75% travel max per month)., • Willingness and ability to work outside in adverse conditions., • Must hold and maintain a valid State of Texas driver’s license with a clean driving record., • Demonstrated problem-solving ability with a proactive, “can-do” and innovative mindset., • Proven ability to follow directions, work independently, and collaborate effectively within a team., • Dependable, punctual, and committed to delivering high-quality results., • Strong verbal and written communication skills, including the ability to interact professionally with customers and colleagues., • Exceptional organizational skills with the ability to self-direct, prioritize tasks, and manage time effectively., • Must possess a practical, hands-on approach and a commitment to continuous learning and improvement. Education Requirements: • High School Diploma or GED

Job DescriptionDescription: Competitive Pay | Comprehensive Benefits | Performance Bonuses | Employee Incentive Trips! Quick and simple hiring process—apply today, and we’ll be in touch soon! Clear path for career advancement with structured training and promotion opportunities. Power Up Your Career with Worldwide Power Products We are looking for a Level IV Generator Technician, you will install, troubleshoot, repair, and maintain diesel and natural gas generators and engines ranging from 20 kW up to 500 kW. This role is responsible for identifying, troubleshooting, diagnosing, and providing quality repairs of electrical generator systems and related engine mechanical failures. • Full-time, steady work, • Top-tier training and career growth opportunities, • Work on industry-leading engines (CAT, Cummins, MTU) Position Summary Level IV Technicians install, troubleshoot, repair, and maintain diesel and natural gas generators and engines ranging from 20 kW up to 500 kW. This role is responsible for identifying, troubleshooting, diagnosing, and providing quality repairs of electrical generator systems and related engine mechanical failures. Essential Duties Service Support • Perform basic preventive maintenance and assist others in performing intermediate and advanced corrective maintenance tasks., • Uses basic knowledge of engine/generator mechanical and electrical operation to perform tasks or assist others., • Replaces batteries, belts, and hoses; changes and/or tops off oil and filters., • Properly and completely fills out all service reports, PM checklists and timecards within department guidelines; Ensures they are legible and accurate with sufficient detail for service accounting needs., • Works on a flexible work schedule and responds to emergency calls as needed., • Obtains pre-assigned work orders by schedule date, customer name, service level and locate/load parts, check for any special instructions; Travels to job site, performs scope of work, provides detailed computerized template report and timecard upon work assignment completion for daily accountability., • Proficiently and accurately evaluate, test, diagnose and troubleshoot basic and intermediate problems on gas or diesel engines and generators (out of fuel, dead battery, etc.); Give recommendations for and make associated repairs. Communicate, plan, complete, and document all troubleshooting and repair procedures within standard repair times., • Performs load bank testing with full understanding of both Reactive/Resistive testing in accordance with applicable NFPA regulations or customer specific request., • Performs troubleshooting of block heater and battery chargers and replacement if needed., • Performs advanced troubleshooting and corrective maintenance; and assists or leads others in performing intermediate and advanced troubleshooting and corrective maintenance tasks on engines, generators, and other associated mechanical and electrical equipment., • Performs control panel conversions, re-tapping generator ends, and isolating/replacing faulty breakers., • Prepare various reports as directed to maintain accurate records on equipment and preventive maintenance., • Communicating with customers as necessary regarding the status of their equipment and ensuring strong relationships are maintained., • Works with Supervisor with technical issues and scheduling., • Maintain thorough knowledge of and actively practice and promote safe working activities in accordance with OSHA, EPA and other required regulations dealing with safe operation of all equipment., • Report all recognized unsafe conditions or acts to Management., • Will provide and use their own tools that are necessary to complete the job requirements. Necessary tools listed in “Essential Tools” section., • Attend training sessions as required. Mechanics combination wrench set 3/8? to 1? (Metric & SAE) Pipe wrench set Mechanics screwdriver set Cordless impact drivers (3/8?, 1/2?, 3/4?) Mechanics pliers set Fluid pump Filter wrench Jumper cables or booster pack Mechanics 3/8? drive socket set 3/8” to 1” (Metric & SAE) Flashlight Mechanics 3/4? drive socket set 3/8? to 1? (Metric & SAE)Quality Multimeter Allen Wrench Set Up to ½” (Metric & SAE)Amp Meter Adjustable wrench set Phase rotation meter Core Values • Communication: We encourage open, effective dialogue through the exchange of ideas and solutions through all levels of our company and our customers., • Accountability: We are personally accountable for delivering on our commitments., • Integrity: We believe that to be successful, it is essential to operate at the highest levels of honesty, responsibility, and trust., • Industry leader with a strong reputation in power generation, • Career growth through on-the-job training, mentorship, and promotions, • Clear career advancement path: Apprentice/Entry Level ? Technician I ? Technician II ?Technician III ? Technician IV ? Tech Lead/Supervisor, • Competitive pay and full benefits including medical, dental, vision, and a 401(k) match, • Paid trips and spot bonuses – every employee earned a bonus and an all-expenses-paid trip to Cabo the past two years, • State-of-the-art equipment and technology to do your job right, • A supportive team culture that values collaboration and expertise, • Nice work trucks, • Overtime opportunities, • $150 work boot allowance, Uniforms + free dry cleaning, • Access to company provided Hunting lease, • Hard Work Deserves Real Rewards Education • High school diploma or general education degree (GED), • Trouble-shooter, • Time Management, • Communication Skills, • Problem Solving, • Proficient with Microsoft Suite Applications

Job DescriptionCustomer Coordinator II Camin Cargo Control is a value-based organization that stands for more than just providing mission critical services. The Company’s core principles of fairness, integrity and excellence have been the foundation upon which the organization was built. • Fairness: Approach situations in an open, consistent, and ethical manner with fairness, sincerity, and honesty, • Integrity: Create an empowered, engaging, and accountable culture focused on client service, • Excellence: Always strive for excellence through continuous process improvement, best practices to achieve superior results and the creation of opportunities to benefit all stakeholders Position Summary This position is based in the branch office and functions as primary liaison between the Inspector Coordinator and the Customer and coordinates day to day customer relations with customers. Responsible for ensuring that Company personnel and resources meet the job requirements as communicated by the customer. Has the authority and responsibility for front filling for an Operations Manager in their absence. Minimum Requirements • Requires a H.S. Degree (or equivalent) and a minimum of three years, • Relevant and increasingly responsible experience in field inspection services and/or knowledge of various product specifications in the petroleum industry., • Must demonstrate strong evidence of judgment and effective managerial and inter-personal skills. Responsibilities • Functions as Point of Contact and the Company’s representative to customers to ensure their satisfaction with Camin Cargo’s performance. Communicate with customers regarding information relating to field measurements, lab testing and providing job progress updates. Developing and recommending solutions to unusual customer demands and requirements that advance the Company’s business interest and at the same time satisfy the customer., • Reviews and evaluates the customer’s nomination (purchase order) for completeness and accuracy and for the Company’s ability to meet customer requirements., • Reviews customer’s job requirements with Inspector Coordinator or Laboratory Coordinator to ensure that the customer’s requirements are properly addressed on time. May communicate directly to the Inspector or Laboratory Technician as necessary., • Receives, analyzes, compiles, and verifies data resulting from field measurements and laboratory testing, and prepares or supervises the preparation of the applicable reports for the customer to ensure that the customer nomination and guidelines have been performed and completed., • Has authority and discretion to resolve, in fiscally responsible manner, customer complaints using superior negotiating and customer relations skills, under minimal supervision., • Interprets, administers, and applies policies of the Company to resolve disputes or customer dissatisfaction., • Using advanced knowledge gained in the field and / or the laboratory, identifies the root causes of quality system problems (customer, terminal or company system) in respective areas of responsibility and uses good judgment to independently troubleshoot, initiate, recommend, and/or implement timely solutions to the problems., • Performs or shares scheduling and job assignment duties during non-working hours, weekends and holidays., • Attends and participates in branch management meeting Fitness for Duty – Physical Demands • This position will be in an office setting, but field work may be required., • Ability to occasionally lift up-to-50 pounds, push & pull, reach overhead, stoop & squat, and wear protective equipment if required. This document contains Confidential and Proprietary information which is the property of Camin Cargo Control. None of the information contained herein may be disclosed, reproduced, distributed or used without prior written consent from Camin. All rights reserved.

Job DescriptionCustomer Experience & Sales Supervisor - Lead, Grow & Make an Impact Do you thrive on leading teams, solving problems, and turning every customer interaction into an opportunity for success? Are you passionate about both sales and service, and ready to inspire a team that drives growth and delivers exceptional care? If so, this role is for you. We don’t just serve customers - we build lasting relationships that protect families, pets, and the planet. As our Customer Experience & Sales Supervisor, you’ll guide and grow our Inside Sales and Customer Care teams, empowering them to reach goals, create meaningful connections, and deliver outstanding service every day. If you’re a strong communicator, motivator, and results-driven leader with a talent for sales and service excellence, this is your chance to take the next big step in your career. Why You’ll Love It Here: • Supportive Leadership Culture - You’ll lead through encouragement, not just expectations, and help your team hit goals with confidence., • Growth Opportunities - As our company expands, your leadership path can grow right along with it., • Mission-Driven Work - Protect families, pets, and the environment with services you can truly stand behind., • Collaborative Environment - Partner with operations and leadership to ensure customers get the best possible experience., • Lead, coach, and motivate our Inside Sales and Customer Care Representatives., • Foster a sales-focused culture built on relationship-based selling and service excellence., • Deliver hands-on coaching through call reviews, sales goal tracking, and team development., • Handle escalated customer concerns with professionalism and care, turning challenges into retention and upsell opportunities., • Partner with operations to maintain smooth routing, scheduling, and communication., • Track and analyze team performance to identify trends, celebrate wins, and drive improvement., • Leadership Experience - Proven success leading a team in sales, customer service, or call center operations., • Sales Mindset - You know how to motivate and coach a team to meet and exceed sales goals while maintaining great relationships., • Customer Focus - You believe that strong service and smart selling go hand in hand., • Experience - At least 3 years in sales and/or customer service, with leadership experience strongly preferred., • Licensed or Ready to Learn - Texas Pest Control Technician license with Termite category (or ability to obtain within 90 days)., • Tech-Savvy - Comfortable with CRM systems (FieldRoutes experience a plus)., • Competitive Salary + Sales Incentives - Rewarding you for both leadership and results., • Health Benefits - Medical, dental, and vision with employer contribution., • 401(k) with Match - Invest in your future while you grow your career., • PTO & Paid Holidays - Recharge when you need it most., • Winning Culture - A team that works hard, celebrates success, and has fun along the way. If you’re ready to lead a dynamic team, drive sales growth, and deliver outstanding customer experiences every day, we’d love to meet you. Apply today and take the next step in your leadership journey with us! Powered by JazzHR HGWGrBigF1

Job DescriptionDescription: Job Summary GenServe is seeking a highly skilled and experienced Generator Technician to join our elite field service team. This position requires advanced expertise in diagnosing, repairing, and maintaining a wide range of generator systems, including diesel, natural gas, and propane-powered units, as well as complex automatic transfer switches (ATS) and control systems. Gen Tech 3’s are expected to work independently in the field, lead service projects, and support our Level 1 and Level 2 Gen Techs. Key Responsibilities • Perform advanced diagnostics and repairs on commercial and industrial generator and associated systems., • Troubleshoot and service complex electrical issues, engine performance problems, and control system faults., • Conduct full system testing including load bank testing, frequency/voltage checks, and ATS operation validation., • Interpret and apply wiring diagrams, schematics, and technical manuals., • Lead or support large-scale emergency service response efforts., • Maintain complete and accurate service records, parts usage, and technical reports., • Provide support and guidance to Gen Tech 1 and 2’s., • Coordinate with project managers, clients, and vendors to ensure successful completion of work., • Promote and enforce GenServe’s safety practices and protocols at all job sites., • Participate in on-call rotation and emergency response duties as needed and resolve equipment issues on-site., • Coordinate with dispatch to schedule multi-day service jobs and manage rental equipment for complex repairs, ensuring timely availability and efficient resource allocation., • High school diploma or GED required; trade school or technical certification strongly preferred., • Minimum of 5 years’ direct experience in generator service and repair or related field, • Strong knowledge of major generator brands (Cummins, Kohler, Generac, CAT, MTU, etc.)., • Proficiency with multiple OEMs including Generac, CAT, Cummins, Kohler, MTU, and ASCO is preferred., • Proficiency with diagnostic tools, multimeters, software interfaces, and load banks., • Valid driver’s license with a clean driving record., • Strong knowledge of NFPA 110, NFPA 70E and OSHA standards., • Physically able to lift 50+ lbs and work in field/outdoor conditions., • Must perform all duties and responsibilities of a Gen Tech 2., • Expert-level troubleshooting and repair skills for mechanical and electrical systems., • Strong leadership and mentoring abilities., • Excellent communication and customer service skills., • Ability to work independently and manage multiple service calls or projects., • High level of safety awareness and attention to detail., • Strong organizational and documentation skills., • EGSA Certification (Apprentice). Gen Tech 3 at GenServe are on the path of advancement into roles such as Gen Tech 4, Service Manager, Sales Rep, Service Writer, System Integrations, etc. depending on performance, qualifications, and career goals. Continued OEM training and leadership development programs are available for high performers. Why GenServe? • Industry leader in emergency power system service and support, • Competitive compensation and benefits, • Consistent year-round work, • Paid OEM and technical training programs, • Supportive leadership and long-term career growth opportunities, • Supportive, team-oriented work culture, • Technician Appreciation DaysRequirements:

Job Description PPL Motor Homes is an established RV service center seeking skilled individuals at all levels of experience to join our team. We value personality, strong work ethic, and motivation to excel. As a Service Technician, your responsibilities will include: • Conducting diagnostics and troubleshooting on RV-related service issues, • Documenting required repairs and submitting parts requests, • Completing repairs in a timely and quality manner, • Conducting quality control checks on completed repairs, • Communicating effectively with service writers and parts personnel to ensure accurate estimates, • Providing excellent customer service and interacting with customers on needed/completed repairs Qualifications we're looking for: • Experience in dealership or related fields preferred, • Handyman, HVAC, plumbing, electrical, or carpentry experience a plus, • RVDA – RVIA Technician Certification preferred but not required, • Good customer service and communication skills, • Valid driver's license and clean driving record, • Must be punctual and have good attendance At PPL Motor Homes, we offer: • Competitive pay with performance-based hourly pay and production bonuses, • Accredited and ongoing training opportunities, • Specialty tools provided, • Health, dental, and life insurance after 90 days, • 401(k) with company match, • Paid vacation time, • Opportunity for long-term employment and growth

Job Description About the Job: The Field Service Technician will assist in the installation, operation, trouble-shooting and service of sold/liquid separation equipment, solids management and zero-discharge equipment (VCD's, shakers, centrifuges, dewatering units, centrifugal pumps, package systems, etc). Employee must be able to travel 80 % of the time. Some international travel required. Work schedule may be adjusted to allow weekdays off when weekends are worked. The location will be the base office in Stafford when not on service calls. Additionally, the Field Service Technician may be called upon to assist in the maintenance and fabrication of equipment before and after service jobs and assist in equipment setup, troubleshooting efforts, maintenance routines, and ordering equipment/supplies. Key Skills and Competencies: 3. Must be willing to travel extensively to support customer installation; including international travel, 4. Must have strong computer skills and experience with HMI-touch screen control systems., 6. Apply technical skills in an effective customer-service oriented manner., 7. Demonstrate interpersonal skills, including excellent written and verbal communication skills. Must be capable of working with difficult people and capable of maintaining professionalism in stressful conditions. Responsibilities and Accountabilities: Principle job functions are outlined below: 7. Maintain an expense report and submit monthly, 8. Maintain communication with the Field Service Manager on a daily basis., 9. Coordinate travel and visa arrangements

Job DescriptionDescription: We are ERock! Enchanted Rock is a leader and innovator of Electrical Resiliency-As-A-Service. Our advanced dual-purpose microgrids protect companies, critical infrastructure, and communities from unexpected power outages, ensuring business continuity and civic durability. Enchanted Rock’s dual-purpose microgrids use natural gas and renewable natural gas (RNG) to drive the nation’s most dependable microgrids — all while producing significantly lower to zero carbon emissions than traditional diesel backup generators. Powered by GraniteEcosystem™, our revolutionary software system, Enchanted Rock solutions provide 24/7/365 monitoring, optimization, and forecasts to enable worry-free, reliable power for businesses. The Enchanted Rock solution brings together patented technologies, advanced dual-purpose microgrid designs and integrated end-to-end services. The Power is On and we keep it on. What you’ll do… We are looking to hire a detailed-oriented, driven, and resourceful Microgrid Mechanical Technician to assume responsibilities for multiple Microgrid generators. The successful candidate will have a proven track record of performing maintenance on power generation equipment, electrical experience as a plus. The entry-level Microgrid Mechanical Technician will coordinate with Area Managers to ensure generators are maintained, serviced, and operate for customer requirements for on demand electricity. This is a remote field position and will report to the Area Manager. You’ll make an impact by: · Perform skilled repairs of Volvo Penta Diesel Engines (16 L), Power Solutions International (21.9 L), Generac (21.9 L) and Marathon generator ends, as well as various voltage control and synchronizing equipment under supervision of senior technicians. · Learn and utilize manufacturer specific software to troubleshoot and diagnose engine and control system problems. · Facilitate technical support and liaison with equipment manufacturers. · Perform scheduled, preventive, or predictive generator maintenance tasks. · Perform troubleshooting and repair tasks. · Perform periodic inspections to identify maintenance needs. · Work in potentially confined areas of high heat and humidity, and cold. · Follow company process and procedures for verbal/written communications. · Utilize all current technology for communication, documentation, and research. · Ensure Safe Operation of electrical equipment by enforcing company and industry standards, including but not limited to LOTO and Dead Checks. · Safely prepare, operate, and maintain motor vehicles for the purpose of conducting company business. · Additional responsibilities may be added at the direction of Company’s management. · Safely prepare, operate, and maintain a motor vehicle for purposes of conduction company business Requirements: You’ll sweep us off our feet if you: · Quick Learner – Able to pick up technical skills and procedures efficiently. · Positive Attitude – Approaches challenges with optimism and determination. · Team-Oriented – Works well alongside senior technicians and other departments. · Eager to Grow – Shows interest in continuous learning and professional development. · Dependable – Reliable attendance and follows through on assigned tasks. · Safety-Minded – Always prioritizes safe work practices and follows protocols. · Adaptable – Can adjust to different job sites, schedules, and changing priorities. · Strong Communicator – Listens carefully, asks questions, and shares information clearly. · Detail-Oriented – Pays attention to small details that ensure quality work. · Self-Motivated – Takes initiative without waiting for constant direction. · Mechanical Aptitude – Shows a natural ability for troubleshooting and hands-on work. · Respectful & Professional – Represents the company well in all interactions. What you’ll need: • High school diploma or equivalent (e.g., GED)., • Basic mechanical skills and engine operation knowledge (electrical experience is a plus)., • Must be open to training, direction, and continuous learning and improvement., • Operate company vehicles safely and efficiently to transport materials, equipment, or personnel to designated locations, adhering to all traffic laws and regulations., • Successfully pass Motor Vehicle Record (MVR) check to ensure compliance with company standards and safe driving practices., • Attention to Detail- Is thorough when performing work and conscientious about attention to detail., • Computer skills- Uses computers, software applications, databases and automated systems to accomplish work., • Flexibility-Technicians have a rotating on call schedule. Must be available to work evenings, weekends and/or holidays., • Must be able to be on your feet for multiple hours a day., • Must be able to climb a ladder and lift 50 lbs safely., • Medical, Dental, Vision, and Prescription Drug Insurance, • Company-Paid Life Insurance, • Disability Insurance, • Paid Family Leave, • Flexible Spending Account (FSA), • Health Savings Account (HSA), • Wellness Programs and Incentives, • 401(k) Retirement Plan & Company Match, • Paid Time Off – Sick & Vacation Time, • Paid Holidays, • Hybrid Work Schedule! The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. Enchanted Rock is committed to creating a diverse environment and is proud to be an equal opportunity employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, gender, gender identity or expression, sexual orientation, national origin, genetics, disability, age, or veteran status. At Enchanted Rock, we embrace diversity, including all the unique characteristics that make us human: race, age, sexual orientation, gender identity, religion, disability, and education — to name a few. We understand and recognize that diverse backgrounds and perspectives strengthen our teams and our business. The foundation of our diversity efforts is closely tied to our core values specifically our value of “The Team” which includes “Mutual Respect, Openness, and Honesty.”

Job Description HVAC Field Service Manager Full-Time | Competitive Pay + Performance Bonuses About the Role We’re seeking an experienced HVAC Field Service Manager with proven HVAC management and field leadership experience to lead and develop a team of residential service technicians. This is a hands-on leadership role for someone who knows HVAC operations, understands technician-driven sales, and can coach teams to perform at a high level. You’ll be responsible for field coaching, operational efficiency, sales performance, and technician accountability. Your leadership will directly impact revenue growth, customer satisfaction, and team success. Why This Role Stands Out • High-impact leadership: Play a key role in growing and scaling a residential HVAC service division, • Strong earning potential: Competitive base pay plus performance-based bonuses, • Career growth: Ongoing leadership development and advancement opportunities, • Supportive culture: Join a company that values accountability, teamwork, and innovation What You’ll Do • Lead, coach, and develop HVAC service technicians through ride-alongs and field training, • Provide real-time coaching on diagnostics, customer communication, and in-home sales, • Train technicians on upselling, objection handling, and closing best-practice recommendations, • Monitor and improve key performance metrics including close rate, average ticket, revenue, and callbacks, • Enforce SOPs, safety standards, quality control, and on-time performance, • Manage daily operations including scheduling, job readiness, and equipment availability, • Oversee commercial HVAC and insulation opportunities, including job research, planning, and execution, • Conduct weekly team meetings and report KPIs and performance trends to leadership, • Build a strong team culture through accountability, coaching, and performance improvement plans, • Ensure company fleet vehicles are properly maintained and safe for daily operations What You Bring • 3+ years of HVAC management or HVAC field leadership experience (required), • Strong background in residential HVAC service operations, • Proven ability to coach technicians on sales performance and customer experience, • Solid understanding of HVAC systems, field workflows, and OSHA safety practices, • Experience using CRM and dispatch systems (Workiz preferred), • Excellent communication, leadership, and problem-solving skills, • Valid driver’s license with a clean driving record, • Ability to lift 50+ lbs, climb ladders, access attics, and work in varying conditions, • Open availability, including occasional evenings or weekends Ready to Lead a High-Performing HVAC Team? If you have real HVAC management experience and want to make a measurable impact while growing your career, we want to hear from you. Apply today. Company DescriptionWe help skilled tradespeople find jobs they love with top employers, fair pay, real growth, and career support every step of the way.We help skilled tradespeople find jobs they love with top employers, fair pay, real growth, and career support every step of the way.

Job DescriptionSalary: $18/hr+ DOE Want to be part of one of the countrys fastest growing infrastructure businesses? The Vortex Companies, LLC delivers cutting edge trenchless technologies and turnkey services to make the worlds water cleaner and were growing every day! We think BIG about solving the worlds toughest challenges in failing water, sewer and industrial infrastructure. At Vortex, you will be surrounded with a culture that puts your safety first in all we do. If you like a fast-paced environment, a team structure that provides support, training, and development, then apply today! The role of the Lining Technician is to assist the crew with various positions, safety, inspection, cleaning/preparation, repairs, and rehabilitation of structures. We are willing to train the right candidate! TRAVEL IS REQUIRED. Duties and Responsibilities: • Set up traffic control, safety equipment, and installation equipment at the job site., • Troubleshoot problems., • Communicate with your management team on progress and issues that arise., • Load materials and equipment into vehicles for transportation to and from the job site., • Enter below ground utility structures., • Ensure the site is left clean before the crew leaves., • Clean vehicles, equipment and keep the site/support trailer organized and clean., • Perform other related duties as required. Skills and Specifications: • Shotcrete/Gunite experience is a plus., • Concrete finishing., • Capable of following instructions and learning via On-Job training., • Ability to operate a variety of simple and complex tools. Qualifications: • Must be at least 18 years of age., • Valid driver's license required and must be able to pass pre-employment drug test, background check, D.O.T. physical and drivers license check for past 36 months without any suspensions or major traffic violations (D.O.T. requirements)., • Experience working in a physical labor position and/or outdoor construction preferred. Must be able to work in the various weather conditions., • Ability to work overtime and out of town., • Ability to enter and work in confined spaces., • Ability to perform physically demanding tasks and lift at least 50 lbs. Position Type/Expected Hours of Work: this is a full-time, non-exempt position. Days and hours of work are typically Monday through Saturday and could include shift work, weekends, evenings, holidays - Flexibility is required as job duties demand. $60/day per diem when traveling. Flights and hotels (single occupancy rooms) are paid for by the company. Rotation schedule is 6 weeks on and 1 week off. Benefits - we offer a competitive total compensation package including health, vision, and dental insurance, 401K retirement plan, income protection insurance, off the job accident insurance, PTO and more! Vortex Services and all subsidiaries is an equal opportunity employer and does not discriminate against otherwise qualified applicants on the basis of race, color, creed, ancestry, religion, orientation, age, sex, marital status, national origin, genetic information, disability, or veteran status. We are a fair chance employer.

Job DescriptionBuild a Better, Cleaner Future – One System at a Time Are you a self-Motivated, hard working, hands-on problem solver who thrives in fast-paced environments and wants to make a real-world impact? Join Zeeco, the global leader in combustion and environmental solutions Equipment providers, as a Field Service Vapor Specialist in our Vapor Control Group. You’ll work on cutting-edge Vapor Recovery and Combustion systems that keep the environment cleaner and equipment running safely. From emergency troubleshooting to commissioning brand-new equipment, every day brings a new challenge—and a new opportunity to grow your skills and career.As a Field Service Specialist you'll be the trusted expert supporting Zeeco’s Vapor Recovery Systems and Combustors in your region. You’ll deliver critical aftermarket service, including: • Preventative & Emergency Maintenance – Provide on-call, after-hours support (24/7) to troubleshoot and resolve unplanned equipment shutdowns, both onsite and remotely., • System Commissioning’s, Retrofits, & Upgrades – Help launch and improve new and existing vapor control and product loading equipment., • Tech-Driven Problem Solving – Apply electrical, mechanical, and automation skills to diagnose and fix issues using PLCs, software tools, and instrumentation., • Customer Service & Reporting – Document and identify efficiently all service tasks, recommend system improvements, and ensure high-quality communication with customers and internal teams., • Compliance & Safety – Maintain and operate company-provided tools, assets, and vehicles, meet all safety requirements, and always put safety first—yours and others’.Qualifications:, • Electrical skills equivalent to Journeyman level or a 2-year instrumentation engineering certificate, • Work experience that shows work in instrumentation, electrical and controls repair and replacement for 4+ years in a similar field., • Strong grasp of mechanical and electrical schematics, • Familiarity with PLC systems, basic programming, and hardware troubleshooting, • Strong working knowledge of VFD, recorders, HMI’s and associated controls and proficiency with determining and isolating problems within the systems., • Ability to use Microsoft software (Word, Excel, Outlook), tablets, and reporting tools, • Education & Experience:, • High school diploma plus 2-year technical certificate, Journeyman electrical license, or 4+ years of field service experience, • Military experience in Electrical or Mechatronics is a strong plus!, • Physical Requirements:, • Able to lift up to 50 lbs, work at heights, climb ladders/stairs, stand for long periods of the day, and perform tasks in extreme weather and confined spaces while wearing PPE., • Mental & Emotional Readiness:, • You’ll need strong problem-solving skills, the ability to work independently under pressure, and the emotional intelligence to handle challenging or stressful customer situations., • Driver’s License:

Job DescriptionDescription: Competitive Pay | Comprehensive Benefits | Performance Bonuses | Employee Incentive Trips! Quick and simple hiring process—apply today, and we’ll be in touch soon! Clear path for career advancement with structured training and promotion opportunities. Power Up Your Career with Worldwide Power Products We are looking for a Level III Generator Technician, you will install, troubleshoot, repair, and maintain diesel and natural gas generators and engines ranging from 20 kW up to 500 kW. This role is responsible for identifying, troubleshooting, diagnosing, and providing quality repairs of electrical generator systems and related engine mechanical failures. • Full-time, steady work, • Top-tier training and career growth opportunities, • Work on industry-leading engines (CAT, Cummins, MTU) Service Support • Perform basic preventive maintenance and assist others in performing intermediate and advanced corrective maintenance tasks., • Uses basic knowledge of engine/generator mechanical and electrical operation to perform tasks or assist others., • Replaces batteries, belts, and hoses; changes and/or tops off oil and filters., • Properly and completely fills out all service reports, PM checklists and timecards within department guidelines; Ensures they are legible and accurate with sufficient detail for service accounting needs., • Works on a flexible work schedule and responds to emergency calls as needed., • Obtains pre-assigned work orders by schedule date, customer name, service level and locate / load parts, check for any special instructions; Travels to job site, performs scope of work, provides detailed computerized template report and timecard upon work assignment completion for daily accountability., • Proficiently and accurately evaluate, test, diagnose and troubleshoot basic and intermediate problems on gas or diesel engines and generators (out of fuel, dead battery, etc.); Give recommendations for and make associated repairs. Communicate, plan, complete, and document all troubleshooting and repair procedures within standard repair times., • Performs load bank testing with full understanding of both Reactive/Resistive testing., • Performs block heater installation and installs battery chargers., • Performs advanced troubleshooting and corrective maintenance; and assists or leads others in performing intermediate and advanced troubleshooting and corrective maintenance tasks on engines, generators, and other associated mechanical and electrical equipment., • Uses basic knowledge regarding Automatic Transfer Switch (“ATS”); electrical equipment, lights, motors, computers, etc., • Performs control panel conversions, re-tapping generator ends, and isolating/replacing faulty breakers., • Sets up, starts, and operates equipment as directed both in-house and at customer locations., • Prepare various reports as directed to maintain accurate records on equipment and preventive maintenance., • Maintain thorough knowledge of and actively practice and promote safe working activities in accordance with OSHA, EPA and other required regulations dealing with safe operation of all equipment., • Report all recognized unsafe conditions or acts to Management., • Will provide and use their own tools that are necessary to complete the job requirements. Necessary tools listed in “Essential Tools” section., • Attend training sessions as required., • Mechanics combination wrench set 3/8" to 1" (Metric & SAE), • Pipe wrench set, • Mechanics screwdriver set, • Cordless impact drivers (3/8", 1/2", 3/4"), • Mechanics pliers set, • Fluid pump, • Filter wrench, • Jumper cables or booster pack, • Mechanics 3/8" drive socket set 3/8” to 1” (Metric & SAE), • Flashlight, • Mechanics 3/4" drive socket set 3/8" to 1" (Metric & SAE), • Quality Multimeter, • Allen Wrench Set Up to ½” (Metric & SAE), • Amp Meter, • Adjustable wrench set, • Phase rotation meter Core Values • Communication: We encourage open, effective dialogue through the exchange of ideas and solutions through all levels of our company and our customers., • Accountability: We are personally accountable for delivering on our commitments., • Integrity: We believe that to be successful, it is essential to operate at the highest levels of honesty, responsibility, and trust., • Teamwork: We succeed because we help our co-workers to succeed in a collaborative, supportive, creative, and enjoyable environment., • Customer Satisfaction: We aim to meet or surpass our customer’s expectations by providing the highest quality products and customer service. Bend over backwards, can-do attitude Why Join Worldwide Power Products • Industry leader with a strong reputation in power generation, • Career growth through on-the-job training, mentorship, and promotions, • Clear career advancement path: Apprentice/Entry Level ? Technician I ? Technician II ?Technician III ? Technician IV ? Tech Lead/Supervisor, • Competitive pay and full benefits including medical, dental, vision, and a 401(k) match, • Paid trips and spot bonuses – every employee earned a bonus and an all-expenses-paid trip to Cabo the past two years, • State-of-the-art equipment and technology to do your job right, • A supportive team culture that values collaboration and expertise, • Nice work trucks, • Overtime opportunities, • $150 work boot allowance, Uniforms + free dry cleaning, • Access to company provided Hunting lease, • Hard Work Deserves Real Rewards, • High school diploma or general education degree (GED), • Trouble-shooter, • Time Management, • Communication Skills, • Problem Solving, • Inventiveness, • Proficient with Microsoft Suite Applications