Corporate health jobs in Syracuse, New YorkCreate job alerts

Clean Harbors in Syracuse NY is seeking a CDL Driver (B- Hazmat) to operate light and heavy-duty trucks/work equipment at our customer sites; some of the vehicles operated include Vacuum Trailer, roll-off trailers, van trailers, box trucks and high-powered vacuum loaders. This role is responsible for performing driving and non-driving duties on and off customer sites associated with hazardous waste clean-up. Clean Harbors is the leading provider of environmental, energy and industrial services throughout the United States, Canada, Mexico and Puerto Rico. Everywhere industry meets environment, Clean Harbors is on-site, providing premier environmental, energy and industrial services. We are solving tough problems through innovation and proven methodology – come be part of the solution with us. Why work for Clean Harbors? • Health and Safety is our #1 priority and we live it 3-6-5!, • Focus on maintaining sustainability and cleaning the Earth, • Recruiting Pay range $26-30/hr., • Comprehensive health benefits coverage after 30 days of full-time employment including 401K with Company match, • Own part of the company with our Employee Stock Purchase Plan, • Opportunities for growth and development for all the stages of your career, • Ensure Health and Safety is the number one priority by complying with all safe work practices, policies, and processes and always acting in a safe manner, • Operate commercial trucks and assist field laborers when needed (team atmosphere where everyone helps), • Operate a variety of Class B trucks, • Loading and unloading of trucks, • Ensure customer satisfaction at time of service., • Proper placarding of vehicles to meet Company and DOT requirements/regulations, • Maintain daily logs, time sheets, and various reports, • Follow all local, state (provincial) and federal compliance regulations and rules, • Safely operate vehicles in accordance with U.S. DOT, local, state (provincial) and federal requirements, • Safely observe all corporate operating guidelines and procedures, • Observe all company environmental health and safety operating guidelines, • Performs other duties as assigned, • By position, ability to be on call for emergency response on rotating basis every other week, • Valid Class B CDL, • Obtain Hazmat and Tanker endorsement within 90 days of employment, • Ability to use various mobile devices, • Perform physical functions per job requirements, • Successfully complete a background check, drug test, and physical, by position, • Per OSHA's Respiratory Protection Standard, 29 CFR 1910.34, employees in positions requiring respirators are required to meet facial hair standards. Preferred Qualifications:, • Commercial driver experience, • Hazmat and Tanker endorsement, • Previous Hazmat experience, • Ability to operate a manual transmission Clean Harbors is a Military & Veteran friendly company. Clean Harbors is committed to complying with applicable pay transparency laws and ensuring fair and equitable compensation. The posted salary range reflects the minimum and maximum target for this role. Final compensation may vary based on factors such as location, experience, skills, and business needs. In addition to the base salary, some roles may be eligible for bonus or incentive compensation and a comprehensive benefits package. *CH

Clean Harbors in Syracuse, NY is seeking an Environmental Field Chemist (CleanPack Chemist) to handle, segregate, pack, and inspect chemical waste in accordance with Federal/State/Local regulations and our company policies and procedures. This position will work both indoors and outdoors at plants, labs, customer sites and are responsible for assisting with lab packs within customer facilities, household hazardous waste (HHW) collections and lab moves. This is a customer facing position, working at customer sites daily. The Environmental Field Chemist are (NOT) laboratory-based Chemist. Clean Harbors is the leading provider of environmental, energy and industrial services throughout the United States, Canada, Mexico and Puerto Rico. Everywhere industry meets environment, Clean Harbors is on-site, providing premier environmental, energy and industrial services. We are solving tough problems through innovation and proven methodology – come be part of the solution with us. Why work for Clean Harbors? • Health and Safety is our #1 priority and we live it 3-6-5!, • Focus on maintaining sustainability and cleaning the Earth, • Pay range $21-23 per hour, BOE, • Comprehensive health benefits coverage after 30 days of full-time employment including 401K with Company match, • Own part of the company with our Employee Stock Purchase Plan, • Opportunities for growth and development for all the stages of your career, • Ensure that Health and Safety is the number one priority by complying with all safe work practices, policies, and processes and always acting in a safe manner, • Prepare computer generated packing lists, labels, manifest, and land disposal restriction notifications, • Perform inspections of staging, accumulating and storage areas to ensure proper housekeeping procedures and compliance, • Inspect storage area and drums for leaks or spills, • Inspect drums for compliance with labeling regulations, • Collects, segregates, and properly packages waste chemicals for disposal to maximize efficiency and maintain compliance, • Executes Jobs at Clean Harbors customer locations including fortune 500 companies, • Responsible for final preparation and approval of all projects before shipment in accordance with OSHA, EPA, DOT and company policies, • Conducts projects/jobs according to site specific Federal, State, and local regulations and health and safety plans, • Understand customer specific disposal restrictions/special packaging requirements, • Sample and profile of new waste streams or any waste needing analytical testing, • Ensures drum count is correct and that drum conditions are shippable in accordance our company’s policies and procedure, • Follow all local, state (provincial) and federal compliance regulations and rules, • Safely operate vehicles in accordance with U.S. DOT, local, state (provincial) and federal requirements, • Safely observe all corporate operating guidelines and procedures, • Observe all company environmental health and safety operating guidelines, • Valid Driver's license, • By position, obtain a CDL Class B with hazmat and tanker endorsement within 6 months of employment, • Strong customer service skills, • By position, obtain a hazmat and tanker endorsement within 90 days of employment, • Perform physical functions per job requirements, • Successfully complete a background check, drug test, and physical, by position, • Per OSHA's Respiratory Protection Standard, 29 CFR 1910.34, employees in positions requiring respirators are required to meet facial hair standards. Preferred Qualifications:, • College degree in Chemistry or Natural Science, • Waste Disposal – Comprehensive disposal of hazardous and non-hazardous waste at Company-owned facilities, • Recycling Services – Extensive recycling, reuse and reclamation options for materials such as solvents, chemicals, oil and electrical equipment, • Chemical Packing – Safe, efficient handling and disposal of the widest range of chemicals, including reactives and compressed gases, • Household Hazardous Waste (HHW) Services – HHW collection programs of all types and sizes, facilitated by Clean Harbors expert personnel Clean Harbors is an equal opportunity employer. Clean Harbors is committed to providing access, equal opportunity and reasonable accommodation for individuals with disabilities in employment, its services, programs, and activities. To request reasonable accommodation, contact ___ or 1-844-922-5547. Clean Harbors is a Military & Veteran friendly company. Clean Harbors is committed to complying with applicable pay transparency laws and ensuring fair and equitable compensation. The posted salary range reflects the minimum and maximum target for this role. Final compensation may vary based on factors such as location, experience, skills, and business needs. In addition to the base salary, some roles may be eligible for bonus or incentive compensation and a comprehensive benefits package.

Clean Harbors in Syracuse NY is seeking a Class A -CDL Driver (Hazmat) to operate a variety of heavy and light duty trucks/work equipment at our customer sites; some of the vehicles operated include vacuum trucks, Cuscos, guzzlers, and roll offs. This role is responsible for performing driving and non-driving duties on and off customer sites associated with hazardous waste clean-up. Clean Harbors is the leading provider of environmental, energy and industrial services throughout the United States, Canada, Mexico and Puerto Rico. Everywhere industry meets environment, Clean Harbors is on-site, providing premier environmental, energy and industrial services. We are solving tough problems through innovation and proven methodology – come be part of the solution with us. Why work for Clean Harbors? • Health and Safety is our #1 priority and we live it 3-6-5!, • Focus on maintaining sustainability and cleaning the Earth, • Competitive Pay, • Comprehensive health benefits coverage after 30 days of full-time employment including 401K with Company match, • Own part of the company with our Employee Stock Purchase Plan, • Opportunities for growth and development for all the stages of your career, • Company paid training and tuition reimbursement RESPONSIBILITIES Key Responsibilities: • Ensure Health and Safety is the number one priority by complying with all safe work practices, policies, and processes and always acting in a safe manner, • Operate commercial trucks and assist field laborers when needed (team atmosphere where everyone helps), • Operate a variety of Class A trucks, • Loading and unloading of trucks, • Manual labor on site to ensure fulfillment of customer needs, • Proper placarding of vehicles to meet Company and DOT requirements/regulations, • Maintain daily logs, time sheets, and various reports, • Follow all local, state (provincial) and federal compliance regulations and rules, • Safely operate vehicles in accordance with U.S. DOT, local, state (provincial) and federal requirements, • Safely observe all corporate operating guidelines and procedures, • Observe all company environmental health and safety operating guidelines, • Performs other duties as assigned, • By position, ability to be on call for emergency response on rotating basis every other week, • Valid Class A CDL, • Ability to obtain Hazmat and Tanker endorsement within 90 days of employment, • Ability to use various mobile devices, • Perform physical functions per job requirements, • Successfully complete a background check, drug test, and physical, by position, • Per OSHA's Respiratory Protection Standard, 29 CFR 1910.34, employees in positions requiring respirators are required to meet facial hair standards. Preferred Qualifications:, • Commercial driver experience, • Hazmat and Tanker endorsement, • Previous Hazmat experience, • Ability to operate a manual transmission Clean Harbors is committed to providing access, equal opportunity and reasonable accommodation for individuals with disabilities in employment, its services, programs, and activities. To request reasonable accommodation, contact or 1-844-922-5547. Clean Harbors is a Military & Veteran friendly company. Clean Harbors is committed to complying with applicable pay transparency laws and ensuring fair and equitable compensation. The posted salary range reflects the minimum and maximum target for this role. Final compensation may vary based on factors such as location, experience, skills, and business needs. In addition to the base salary, some roles may be eligible for bonus or incentive compensation and a comprehensive benefits package. *CH

Prime Staffing is seeking a travel Interventional Radiology Technologist for a travel job in Syracuse, New York. Job Description & Requirements • Specialty: Interventional Radiology Technologist, • Discipline: Allied Health Professional, • Start Date: 12/29/2025, • Duration: 16 weeks, • 40 hours per week, • Shift: 8 hours, • Employment Type: Travel About the Position \n Specialty: Interventional Radiology (IR) Tech Experience: Minimum 2 years of recent experience in interventional radiology License: ARRT certification required; state license if applicable Certifications: BLS and ACLS required; all certifications must be submitted with expiration dates Must-Have: All time-off requests must be submitted with the initial application \n Description: We are seeking a skilled IR Tech to assist in interventional procedures, including vascular access, angiography, and image-guided therapies. This position requires at least 2 years of recent IR experience in a hospital or surgical setting, with strong knowledge of fluoroscopy and sterile technique. \n This role may include on-call duties, weekend/holiday shifts, and floating to other departments. Missed shifts must be made up. Compliance and onboarding typically take 4–6 weeks. Voice screening and a hiring manager interview are required. \n Requirements \n Required for Onboarding: \n\n • BLS – AHA (Active)\n, • ACLS – AHA\n We offer a wide range of staffing services including temporary, temp-to-perm, and direct hire placements. Our extensive network of qualified candidates includes nurses, allied healthcare professionals, corporate support professionals and executives.

Position Title: HVAC Service Tech Reports To: Field Supervisor or General Manager Status: Full-time, Regular position Category: Technician Location Name: Falso Location Address: 6019 Corporate Dr, East Syracuse, NY 13057 Why You Should Join the Service Experts Team? Our team consists of the very best; we believe in doing what is right for our customers and our employees. We provide our employees with the training, support and an opportunity for unlimited professional growth. Join us and become an EXPERT! Service Experts Company Perks and Benefits for YOU • Top Pay for Top Performers, including incentive and bonus opportunities (depending on the position), • Our Top Technicians earn over $100,000, • Generous PTO provided, • 24 paid days off within your first year of employment (vacation, personal holidays, & national holidays), • 29 paid days off after your 2nd year of employment, • Ready to get out of your work truck? We have ample advancement and career-growth opportunities available across the U.S., • Hold on to your more of your paycheck with Company-sponsored Medical, Dental, and Vision Insurance programs, • Company-provided smart phone, tablet, uniform plan, and tool replacement program, • We’ll make you better at what you do with our internal Training Academy, • Best-in-class 401(k) Retirement Savings Plan with attractive company matching contributions, • Company-paid employee Life Insurance with options for YOU and your Family!, • Short-term and Long-term disability insurance options that will protect you and your family if you are unable to work Position Summary: Under minimal supervision, performs diagnostic and service work on residential and/or light commercial HVAC equipment and accessories. Communicates with customer to answer questions, resolves problems, and ensures complete customer satisfaction. Promotes products and services to customer. Works under the direction of the Field Supervisor or General Manager. Key Responsibilities: • Works under minimal supervision to perform residential and/or light commercial service and maintenance calls, • Analyzes, diagnoses, and resolves customer problems in a courteous, professional, timely, and accurate manner, • Diagnoses and performs services on heating, air conditioning, ventilation, and refrigeration equipment as well as accessories in an accurate and timely manner, • Inspects equipment and performs diagnostics on equipment to identify potential problems to prevent premature and unexpected breakdowns or callbacks, • Completes routine maintenance and equipment cleaning as needed or required, • Responsible for delivery and removal of parts and equipment needed to complete service work, • Using hand-held device records all required information on customer call. Completes all forms and paperwork in a neat, timely, complete, and accurate manner. Collects payment from customer., • Communicates with dispatch, while on duty, to ensure dispatcher has an accurate status report of activities and availability, • Responsible for delivery of excellent customer service and sustaining high levels of customer satisfaction, • Promotes products and services to the customer. Calls Sales and Service Coordinator with specifics on replacement product sales leads generated from customer service visit., • Ensures company property, vehicles, and tools are being used, maintained, and properly accounted for, • Represents the company professionally, honestly, and ethically in all business matters and activities, • Follows standard procedures and process, ensures that the company vehicle is properly stocked, returns defective warranty parts to the branch, and orders/replenishes vehicle stock as needed, • Performs similar/other duties as needed or assigned, • Reports any unsafe acts, conditions and hazards to direct supervisor/manager immediately, • Reports any contravention of legislation or company policy, procedure or program to direct supervisor/manager immediately, • Corrects substandard acts or conditions within area of control, • Uses and maintains appropriate personal protective equipment (PPE) as prescribed by company program(s) or procedure(s), • Never removes or renders ineffective safety guards, devices, or clothing prescribed to be in place or worn, • Complies with the general rules as prescribed by company program(s) procedure(s), • Operates devises or equipment as prescribed by company program(s) or procedure(s), • Participates in any safety initiatives, teams, or committees, • Reports all injuries or incidents as prescribed by company program(s) or procedure(s) immediately, • Provides input on developing safety initiatives and plans to eliminate exposures that could cause accidents, • Does not perform act that may endanger the safety or well-being of others, • Does not engage in any pranks, contests, or rough boisterous behavior, • High school diploma or GED with additional training and 1+ years’ experience in HVAC with technical training certification required, • Must possess all valid licensing or certification as required by federal, state, provincial, or local governmental laws or regulations for the geographical work area, • EPA and safety certifications required, • Skilled at servicing heating, air conditioning, and ventilation equipment as well as related accessories, • Proficient mechanical aptitude and the ability to operate all necessary tools and equipment, • Proficient and able to operate all necessary tools and equipment to perform various service projects, • Proficient at reading wiring diagrams and troubleshooting problems with electrical, refrigerant and duct systems on HVAC equipment, • Proficient and able to properly start up and balance airflow and to properly align belts and pulleys on all systems with little to no supervision, • Proficient and able to install a basic duct fitting, • Proficient at troubleshooting and repairing electronic air cleaners, refrigeration systems, hot water systems, steam boiler systems, humidifiers, and related equipment with little to no supervision, • Effective communication skills to communicate with customer and resolve customer issues, complaints, or concerns, • Effective and efficient time-management and organizational skills, • Valid driver’s license with acceptable driving record, • Available to work flexible hours and on-call shifts as needed, • Ability to stand and walk and to climb ladders and attic stairs and to maneuver in attics, basements, and crawl spaces to access HVAC units. Ability to continually climb, balance, stoop, kneel, crouch, and/or crawl., • Ability to work in a variety of environmental conditions, including but not limited to the following: hot, cold, outdoor, indoor, dry, humid, slippery surfaces, heights, and congested areas, • Ability to safely climb 300lb load capacity rated ladders with a 30lb tool belt, • Natural or corrected vision to see and focus for close, distance, peripheral vision with normal depth perception

Prime Staffing is seeking a travel Ultrasound Technologist for a travel job in Syracuse, New York. Job Description & Requirements • Specialty: Ultrasound Technologist, • Discipline: Allied Health Professional, • Start Date: 01/05/2026, • Duration: 16 weeks, • 40 hours per week, • Shift: 8 hours, • Employment Type: Travel About the Position \n Specialty: Ultrasound Technologist Experience: Minimum 2 years of recent experience in ultrasound/sonography License: State license required if applicable Certifications: ARDMS or ARRT(S) required; BLS required; all certifications must be submitted with expiration dates Must-Have: All time-off requests must be submitted with the initial application \n Description: We are seeking a skilled Ultrasound Technologist to perform diagnostic sonographic examinations in accordance with physician orders and imaging protocols. This position requires at least 2 years of recent experience in general, OB/GYN, or vascular ultrasound. Strong understanding of anatomy, scanning techniques, and patient care is essential. \n Floating to other imaging areas may be required. Weekend and holiday rotations may apply. Missed shifts must be made up. Compliance and onboarding typically take 4–6 weeks. Voice screening and hiring manager interview are required. \n Requirements \n Required for Onboarding: \n\n • BLS – AHA (Active)\n, • ARDMS or ARRT(S) Certification\n\n Prime Staffing Job ID #35133268. Pay package is based on 8 hour shifts and 40.0 hours per week (subject to confirmation) with tax-free stipend amount to be determined. Posted job title: Allied / Tech:Ultrasound Tech,08:00:00-16:00:00 About Prime Staffing At Prime Staffing, we understand the importance of finding the perfect fit for both our clients and candidates. Prime Staffing utilizes a unique matchmaking approach, providing the most qualified contingent staffing to our clients, and the most competitive contracts to our workforce. Our experienced team takes the time to get to know both our clients and candidates, their needs, and preferences, to ensure that each placement is a success. We offer a wide range of staffing services including temporary, temp-to-perm, and direct hire placements. Our extensive network of qualified candidates includes nurses, allied healthcare professionals, corporate support professionals and executives.

Are you curious about solving complex business challenges for a leading convenience retailer? Do you have a passion for cross functional collaboration? Then you may be the perfect addition to our team! Fastrac is a member of the EG America family of brands. EG America is one of the fastest-growing convenience store retailers in the United States, committed to becoming America’s #1 ‘one-stop’ destination. The business has an established pedigree of delivering excellent fuel, grocery and merchandise, and food service. Headquartered in Westborough, Massachusetts, our Company has grown to over 1,500+ locations across the United States employing over 18,000 team members. You can find us operating under the following store banners: Certified Oil, Cumberland Farms, Fastrac, Kwik Shop, Loaf N Jug, Minit Mart, Sprint Food Stores, Tom Thumb, Turkey Hill, and Quik Stop. Our headquarters in Westborough, MA is home to our Store Support Center, Company Warehouse, and Culinary Center. What We Offer: • Competitive wages, • Work today, get paid tomorrow through our earned wage access program*, • Paid Time Off, • Medical/Health/Dental Coverage, • 401K with Company Match, • Team Member Discounts, • Tuition Reimbursement, • Employee Assistance Program, • Health Savings Account, • Company Spirit Days, • Employee recognition and awards We are looking for a technically skilled candidate with good problem-solving ability for the position of FTS Support Technician. The duties of an FTS Support Technician include being a reference point for all IT related queries at store level, responding to store’s needs in a timely manner and ensuring the optimal running of all systems, among other technical duties. Additionally, the FTS Support technician will participate in IT projects to upgrade physical technology and secure the environment. Monitor and manage network equipment to maintain both WIFI and network access within the store environment. Responsibilities: 1. Providing support to stores in multiple states and responding in a timely manner, 2. Accessing ticketing system and provide status updates to resolve tickets within service level agreements, 3. Utilize existing technical, computer and electrical knowledge to successfully troubleshoot hardware problems to include, but not limited to installation, upgrading, maintenance, cleaning, and replacement of point of sale, desktop computers, fuel controllers, electronic payment controllers, Digital Media Boards, and telephone equipment., 4. Install and maintain inhouse wiring of both power and network cabling to keep clean and manageable wiring system withing the store, 5. Maintain routers, modems, and access points to ensure proper network settings and availability., 6. Use remote access software to assist Helpdesk personnel to troubleshoot the root cause of the issues and provide a timely resolution., 7. Maintain inventory in vans and at office location to provide accountability and access to all equipment. This includes keeping serviceable assets as well as performing RMAs to vendors., 8. Manage administrative duties such as reporting company mileage, credit card expenses, processing RMAs for equipment on company truck Working Relationships: The FTS Support Technician will be embedded in a team of FTS Techs supporting a territory of convenience stores. The team works together to communicate common goals and to cover off hours, holidays, and weekends. Additionally, the FTS Support Technician will interact with external vendors to provide onsite support outside of covered territories. Team Members must maintain a professional and trustworthy relationship with store personnel to foster an open and accurate accountability as it pertains to store operations and procedures Minimum Education: High School: GED and some technology certification or coursework completed. Preferred Education: Associate’s degree or Technology Program Certificate Minimum Experience: 2+ years’ experience in role relating to computer networks and systems maintenance. Minimum Experience: Preferred Experience: Experience with NCR Radiant, NCR StorePoint Retalix, Verifone, Gilbarco, Wayne, and PDI systems a plus. Licenses/Certifications: Comptia A+, Network Soft Skills: • The ideal candidate has excellent written and verbal communications skills., • Must be able to interact with the IT and store communities to solve physical hardware issues inside a convenience store environment while making independent decisions for resolution., • Must participate in the coordination or technology materials to complete project objectives. Other Requirements: Travel: Ability to travel independently 50-75%. Must have clean driving record. Hours & Conditions: First Shift (Hourly-Non-Exempt) After hours and late nights are required on occasion or rotational basis. Physical Requirements: Ability to maneuver and regularly lift and or move up to 50-75 pounds. Must be able to climb ladders. At EG America, it’s important that our employees reflect the world we live in and the communities we serve. We celebrate our differences, so your unique background and skillset could bring a wonderful new perspective to our team. If you have a passion for delivering exceptional results, thrive in a fast-paced corporate environment, and bring experience in business management or related areas, we'd love to meet you - even if you don't meet every single requirement.

Clean Harbors in Syracuse, NY is seeking a Class B CDL -Environmental Field Chemist (CleanPack Chemist) to handle, segregate, pack, and inspect chemical waste in accordance with Federal/State/Local regulations and our company policies and procedures. This position will work both indoors and outdoors at plants, labs, customer sites and are responsible for assisting with lab packs within customer facilities, household hazardous waste (HHW) collections and lab moves. This is a customer facing position, working at customer sites daily. The Environmental Field Chemist are (NOT) laboratory-based Chemist. Clean Harbors is the leading provider of environmental, energy and industrial services throughout the United States, Canada, Mexico and Puerto Rico. Everywhere industry meets environment, Clean Harbors is on-site, providing premier environmental, energy and industrial services. We are solving tough problems through innovation and proven methodology – come be part of the solution with us. Why work for Clean Harbors? • Health and Safety is our #1 priority and we live it 3-6-5!, • Focus on maintaining sustainability and cleaning the Earth, • Pay range $24-26 per hour, BOE, • Comprehensive health benefits coverage after 30 days of full-time employment including 401K with Company match, • Own part of the company with our Employee Stock Purchase Plan, • Opportunities for growth and development for all the stages of your career, • Ensure that Health and Safety is the number one priority by complying with all safe work practices, policies, and processes and always acting in a safe manner, • Prepare computer generated packing lists, labels, manifest, and land disposal restriction notifications, • Perform inspections of staging, accumulating and storage areas to ensure proper housekeeping procedures and compliance, • Inspect storage area and drums for leaks or spills, • Inspect drums for compliance with labeling regulations, • Collects, segregates, and properly packages waste chemicals for disposal to maximize efficiency and maintain compliance, • Executes Jobs at Clean Harbors customer locations including fortune 500 companies, • Responsible for final preparation and approval of all projects before shipment in accordance with OSHA, EPA, DOT and company policies, • Conducts projects/jobs according to site specific Federal, State, and local regulations and health and safety plans, • Understand customer specific disposal restrictions/special packaging requirements, • Sample and profile of new waste streams or any waste needing analytical testing, • Ensures drum count is correct and that drum conditions are shippable in accordance our company’s policies and procedure, • Follow all local, state (provincial) and federal compliance regulations and rules, • Safely operate vehicles in accordance with U.S. DOT, local, state (provincial) and federal requirements, • Safely observe all corporate operating guidelines and procedures, • Observe all company environmental health and safety operating guidelines, • Valid Driver's license, • Class B or Class A CDL, • Must obtain hazmat and tanker endorsement within 90 months of employment, • Strong customer service skills, • By position, obtain a hazmat and tanker endorsement within 90 days of employment, • Perform physical functions per job requirements, • Successfully complete a background check, drug test, and physical, by position, • Per OSHA's Respiratory Protection Standard, 29 CFR 1910.34, employees in positions requiring respirators are required to meet facial hair standards. Preferred Qualifications:, • College degree in Chemistry or Natural Science, • Waste Disposal – Comprehensive disposal of hazardous and non-hazardous waste at Company-owned facilities, • Recycling Services – Extensive recycling, reuse and reclamation options for materials such as solvents, chemicals, oil and electrical equipment, • Chemical Packing – Safe, efficient handling and disposal of the widest range of chemicals, including reactives and compressed gases, • Household Hazardous Waste (HHW) Services – HHW collection programs of all types and sizes, facilitated by Clean Harbors expert personnel Clean Harbors is an equal opportunity employer. Clean Harbors is committed to providing access, equal opportunity and reasonable accommodation for individuals with disabilities in employment, its services, programs, and activities. To request reasonable accommodation, contact ___ or 1-844-922-5547. Clean Harbors is a Military & Veteran friendly company. Clean Harbors is committed to complying with applicable pay transparency laws and ensuring fair and equitable compensation. The posted salary range reflects the minimum and maximum target for this role. Final compensation may vary based on factors such as location, experience, skills, and business needs. In addition to the base salary, some roles may be eligible for bonus or incentive compensation and a comprehensive benefits package. #CH

Clean Harbors in Syracuse NY is seeking a Class A -CDL Driver (Hazmat) to operate a variety of heavy and light duty trucks/work equipment at our customer sites; some of the vehicles operated include vacuum trucks, Cuscos, guzzlers, and roll offs. This role is responsible for performing driving and non-driving duties on and off customer sites associated with hazardous waste clean-up. \n Clean Harbors is the leading provider of environmental, energy and industrial services throughout the United States, Canada, Mexico and Puerto Rico. Everywhere industry meets environment, Clean Harbors is on-site, providing premier environmental, energy and industrial services. We are solving tough problems through innovation and proven methodology – come be part of the solution with us. \n Why work for Clean Harbors? \n \n\n • Health and Safety is our #1 priority and we live it 3-6-5!\n, • Focus on maintaining sustainability and cleaning the Earth \n, • Competitive Pay \n, • Comprehensive health benefits coverage after 30 days of full-time employment including 401K with Company match\n, • Own part of the company with our Employee Stock Purchase Plan\n, • Opportunities for growth and development for all the stages of your career\n, • Company paid training and tuition reimbursement\n\n \n RESPONSIBILITIES \n \n Key Responsibilities:\n \n \n • Ensure Health and Safety is the number one priority by complying with all safe work practices, policies, and processes and always acting in a safe manner\n, • Operate commercial trucks and assist field laborers when needed (team atmosphere where everyone helps)\n, • Operate a variety of Class A trucks\n, • Loading and unloading of trucks\n, • Manual labor on site to ensure fulfillment of customer needs\n, • Proper placarding of vehicles to meet Company and DOT requirements/regulations\n, • Maintain daily logs, time sheets, and various reports\n, • Follow all local, state (provincial) and federal compliance regulations and rules\n, • Safely operate vehicles in accordance with U.S. DOT, local, state (provincial) and federal requirements\n, • Safely observe all corporate operating guidelines and procedures\n, • Observe all company environmental health and safety operating guidelines\n, • Performs other duties as assigned\n, • By position, ability to be on call for emergency response on rotating basis every other week\n, • Valid Class A CDL \n, • Ability to obtain Hazmat and Tanker endorsement within 90 days of employment\n, • Ability to use various mobile devices\n, • Perform physical functions per job requirements\n, • Successfully complete a background check, drug test, and physical, by position\n, • Per OSHA's Respiratory Protection Standard, 29 CFR 1910.34, employees in positions requiring respirators are required to meet facial hair standards.\n \n\n\n Preferred Qualifications:\n\n\n \n, • Commercial driver experience \n, • Hazmat and Tanker endorsement \n, • Previous Hazmat experience \n, • Ability to operate a manual transmission\n

Prime Staffing is seeking a travel Cath Lab Technologist for a travel job in Syracuse, New York. Job Description & Requirements • Specialty: Cath Lab Technologist, • Discipline: Allied Health Professional, • Start Date: 12/29/2025, • Duration: 16 weeks, • 40 hours per week, • Shift: 8 hours Prime Staffing Job ID #35093973. Pay package is based on 8 hour shifts and 40.0 hours per week (subject to confirmation) with tax-free stipend amount to be determined. Posted job title: Allied / Tech:Cath Lab Tech,08:00:00-16:00:00 About Prime Staffing At Prime Staffing, we understand the importance of finding the perfect fit for both our clients and candidates. Prime Staffing utilizes a unique matchmaking approach, providing the most qualified contingent staffing to our clients, and the most competitive contracts to our workforce. Our experienced team takes the time to get to know both our clients and candidates, their needs, and preferences, to ensure that each placement is a success. We offer a wide range of staffing services including temporary, temp-to-perm, and direct hire placements. Our extensive network of qualified candidates includes nurses, allied healthcare professionals, corporate support professionals and executives.

Job Description Join the Green Automotive Revolution at Fenix Parts About Fenix Parts: Fenix Parts isn’t just a company; it's an essential part of the automotive recycling revolution. As a leading force in the recycling and resale of OEM automotive parts, we have made our mark in the industry for over 25 years. With a robust network expanding across more than 30 locations in the U.S., we are at the forefront of reducing the environmental impact of auto waste. We thrive on innovation, sustainability, and a commitment to excellence. Why Join Fenix? Our team is expanding rapidly to keep pace with our growth and the increasing demand for price-friendly automotive solutions. We are in search of passionate, skilled individuals who are ready to drive their career forward in a dynamic and rewarding environment. If you have a passion for the automotive industry and sustainability, you will find a fulfilling career with us. Position Overview: Outside Car Buyer As a key player on our team, you’ll locate and visit car dealerships, tow yards and automotive auction companies to create new buying opportunities. Your role is crucial to the addition of our organizations vehicle inventory, helping us to supply top-tier parts to our customers and partners. Key Responsibilities: • Purchasing Vehicles: Our car buyer will prospect and locate new potential buying opportunities relating to car dealerships, tow yards, auctions., • New Inventory Management: Will upload new vehicle inventory into our yard management system., • Prospecting: On top of working our company provided lead lists, our buyers will also prospect and hunt for new potential business opportunities., • Professional Communication: Buyers implement professional communication and negotiation skills when working with current and new potential targets., • Work-Life Balance: Home every night. Enjoy a stable day shift schedule from Monday to Friday., • Lead Target Lists: A portion of your leads will be generated and provided by Fenix., • Competitive Compensation: Attractive earnings with growth potential., • Benefits: Comprehensive benefits package including health, dental, and vision coverage, plus 401(k) options., • Professional Development: Opportunities for advancement in a growing company., • Experience: We’re ideally seeking professionals with corporate automotive backgrounds., • Skills: Basic automotive knowledge., • Travel: This position requires up to 100% daily travel. Requires traveling mostly within one hour of set location to list of target leads or areas. Equal Opportunity Employer: We are proud to be an Equal Opportunity/Affirmative Action employer. Qualified applicants will receive consideration for employment without regard to race, sex, disability, veteran, or other protected status. Ready to Make a Difference? Become part of something bigger and help shape the future of automotive sustainability. Apply today to join our amazing team at Fenix Parts and drive forward your career. Together, let us revitalize the way the world views automotive recycling!

Job Description Company Overview CME Associates, Inc. (CME) is an engineering technology firm providing comprehensive Construction Materials Evaluation and Technical Support Services. Our experts specialize in geotechnical engineering, construction materials evaluation, special inspections, geological sciences, subsurface exploration, and investigative engineering. Summary Join our team as a Billing & Accounting Administrator, where you’ll play a key role in ensuring smooth financial operations. In this full-time role, you’ll manage invoice processing, oversee accounts receivable, and handle a variety of essential accounting tasks that keep our business running efficiently. This position is based at CME’s Corporate Headquarters in East Syracuse, NY, with a standard schedule of Monday through Friday, 8:00 AM to 4:30 PM. Responsibilities • Invoicing, • Prepare and process client invoices accurately and in alignment with established schedules., • Enter sales data into QuickBooks with precision and attention to detail., • Ensure timely distribution of invoices on a monthly basis and according to client-specific timelines., • Accounts Receivable, • Perform proactive follow-up on outstanding accounts to maintain healthy cash flow., • Generate, review, and maintain comprehensive A/R reports for internal tracking., • Update QuickBooks regularly with current receivable information., • Organize and securely store all supporting documentation related to financial reports and conclusions., • Maintain clear, professional communication with internal teams and external clients to resolve inquiries and ensure accuracy.Qualifications, • High school diploma required; an associate degree in business, accounting, or a related field is preferred., • Proficiency in Microsoft Office Suite—especially Excel, Word, and Outlook—with strong ability to create and manage spreadsheets and analyze data in Excel., • Familiarity with QuickBooks or similar accounting platforms is highly desirable. Benefits and Perks CME offers competitive wages and all benefits listed here: Health, Dental, Vision, 401K, Health Savings Account, Supplemental Insurance Products, and Paid Time Off (including Holiday, Vacation, Sick and Personal) for full-time employees. This is an Equal Employment Opportunity. All qualified applicants will be afforded equal employment opportunity without regard to race, color, sex, age, marital status, sexual orientation, gender identity, religion, national origin, disability, status as a protected veteran, or any other characteristic protected by federal, state, and local laws. CME Associates, Inc. is an Affirmative Action Employer. A New York State Certified Woman Owned Business Enterprise (WBE). Powered by JazzHR eXqlEA4lqa

Job DescriptionMerchandising Coordinator Randa Apparel & Accessories Job Type: Part-Time Benefit Eligible Territory: Syracuse (13204) Hours Worked Per Week: 30 Pay Range: $16-$21 per hour *Exact compensation may vary based on skills, experience, and location. Randa Apparel & Accessories is one of the world’s leading fashion clothing and accessories companies, spanning 11 countries, with a portfolio of 30 brands including Levi’s, Tommy Hilfiger, Calvin Klein, Columbia Sportswear, and over 100 years of industry leadership. From the #1 dress pant brand in North America to the #1 belt and wallet, RAA produces exceptional products and services worldwide delighting customers and making partners successful. What We Offer: • Competitive base salary, • Annual discretionary corporate bonus, • Mileage reimbursement, • Schedule flexibility, • Health, vision, and dental insurance options with low employee contributions., • Optional supplemental life insurance, pet insurance, and accident & critical illness insurance offered at a group discount rate The Part-Time Merchandising Associate (RMA) executes the Randa and Haggar brand merchandising strategy. Maximizes Randa & Haggar Brand presentation, profile, and prominence on the retail selling floor to increase sales while cultivating partnerships with sales associates, visual managers, department managers, store managers, and district/regional personnel. Key Job Responsibilities: • Implement and execute seasonal account zone-a-grams and visual merchandising guidelines at retail., • Partner with store personnel to place new/replenishment merchandise and POS in a timely manner to maximize product sell-thru and Randa and Haggar brand presentations., • Execute store visits based on business needs and react to the ever-changing retail environment., • Partner with all levels of store, district, and regional management to ensure brand awareness and support. Education • Must be able to work independently., • Vision to be able to distinguish colors., • Sense of touch.

Job Description Accounting & Administrative Assistant American Dairy Association North East Location: North Syracuse, NY | Full-Time About Us American Dairy Association North East is a team of professionals dedicated to building trust in — and driving sales of — dairy foods. We work to inspire consumer passion for dairy through education, outreach, and strategic communication. Position Overview We are seeking a highly organized Accounting & Administrative Assistant to support our CFO, CEO, Accounting Director, and internal teams. This role serves as the first point of contact for callers and visitors while also assisting with accounts payable, deposits, mail processing, and general office operations. Key Responsibilities • Answer, screen, and direct incoming calls professionally., • Assist with Accounts Payable processing, weekly check runs, and spreadsheet updates., • Prepare and process bank deposits and related reports., • Provide administrative support including typing, editing, proofing, and preparing documents., • Maintain office supplies, printed materials, and relationships with print vendors., • Manage incoming/outgoing mail, UPS, and overnight shipments., • Support the Corporate Content Management Platform and file organization. Requirements Qualifications • A.A.S. degree with a business concentration., • 1–2 years administrative/secretarial experience preferred., • 1–2 years accounts payable experience., • Proficiency in Microsoft Word, Excel, Access, and PowerPoint., • Strong attention to detail, organization, and communication skills. If you’re motivated, detail-oriented, and excited to support a mission-driven organization, we’d love to hear from you. Apply today and help us inspire passion for dairy across the region! Benefits • Health Care Plan (Medical, Dental & Vision), • Retirement Plan (401k, IRA), • Paid Time Off (Vacation, Sick & Public Holidays)

Job Description Description: Culligan is seeking an experienced Regional Manager to oversee our business operations and Store Branches in the Northeast South region. The Regional Manager is responsible for leading and managing daily operations through general managers to deliver best in class employee and customer facing metrics/experience and achieve business goals and maximize profitability. As Regional Manager your duties also include guiding/growing staff in your region, setting performance objectives, evaluating, ensuring regulatory and company standards are upheld, and optimizing operational/financial performance. To be successful as a Regional Manager, you should be able to set a vision/strategy for your region, lead/manage/grow other leaders/branch managers, have customer centric mindset, excellent problem-solving/decision-making and teaching/coaching skills to drive continuously improving operational performance and top and bottom-line results. Responsible for top and bottom-line growth strategy and results. Specific Job Function: • Set multiyear vision/budget and tactical execution plan for the region, aligned with BU vision, supported by visibly managed KPIs through strong collaboration/sense of ownership with General Managers, • Adhere to and enforce all company safety guidelines, • Recruit, train, and support General Managers through talent management efforts., • Evaluate and develop team members to ensure future needs of the business are met from a talent perspective with effective leaders in place and strong succession planning., • Foster a team culture by empowering recognizing and motivating branch personnel focused on best-in-class employee experience, • Prepare all staff members to be in position to deliver exemplary customer service and measure the job performance of the staff to ensure customer satisfaction, • Support resolution of escalated customer issues, incident reports, and legal actions., • Identify, design and lead major strategic initiatives for the region and provide strategic analysis to drive improved decision making., • Work directly with the Leadership team and GMs on identifying and resolving significant business issues., • Support/Collaborate with Sales team and General Managers to maximize all revenue streams for the region while developing and implementing business, marketing, and advertising plans., • Drive operational efficiency and cost control measures to achieve business results including revenue and EBITDA targets for assigned region., • Drive/oversee/coach problem solving and continuous improvement sessions with branch resources and/or Region/BU level resources while sharing/learning and implementing region relevant best practices, • Manage internal and external stakeholder relations and negotiate contracts., • Ensure products and services comply with regulatory and quality standards., • Ensure company standards and procedures are followed., • Prepare and present monthly, quarterly, and annual statements, analyses, and reports of operations and finances., • Ensure effective communication through the region, • Analyze data and put together strategic plans to help improve all areas of your region, • At least 60% travel to branches across region. Quarterly travel to Illinois Corporate location, • Complete other ad-hoc tasks as assigned Competencies: To perform the job successfully, an individual should demonstrate the following competencies in this position: Customer Focus Time Management Organization and Planning Problem Solving Teaching/Coaching Strategic Planning Team Player Analytical Judgement/Decision Making Negotiation Integrity Detail Oriented Leadership/Delegation Resourcefulness Talent Management Sales Management Accountability Profit Generation Ability Qualifications: • Bachelor's degree in business administration, management, or a similar field., • 10+ years of overall management and leadership experience., • 5+ years of managing a field team of managers, • 5+ years of dealer/distributed business and experience in a field service industry is a plus, • Water Treatment or Field Service Industry experience required, • Experience in strategy deployment process in multi branch environment and utilizing structured problem solving/project management tools/processes is a plus, • Proficiency in Microsoft Office, with CRM systems, and project management tools., • Excellent communication skills, both verbal and written., • Excellent leadership and decision-making skills., • Ability to multitask and work efficiently under pressure., • Strong analytical and problem-solving skills., • Sales and Profit Management skills, • Ability to build strong teams, • Set winning culture for the region, • Competitive and aggressive

Job Description Job Title: Operations Manager Reports To: General Manager FLSA Status: Salaried - Exempt Supervisory Responsibilities: Yes – Department Leader Position Summary: The Operations Manager will oversee daily foundry processes as well as supervise foremen and union hourly employees while pursuing continuous improvement in areas such as scrap reduction and productivity increases while minimizing cost. Essential functions include but not limited to: • To lead quality practices and procedure to ensure conformance to defined specifications along with continuous improvements in costs, housekeeping, and customer satisfaction., • To be a champion for safety, quality, teamwork, and team development., • Ensure compliance with government, corporate and equipment supplier safety rules and regulations and best management practices., • Participates on Safety Committee and advises team of safety standards, conduct and corrective action., • Proactively identifies and takes action to illuminate potential safety hazards, • Takes immediate corrective action when unsafe conditions or practices are identified., • Ensures housekeeping of manufacturing work environment aligned with 5S and an accident-free work environment., • directs subordinates to effectively meet production standards and goals in a safe, timely and cost-effective manner., • Actively engages the production team in process, safety, and quality continuous improvement activities., • Ensure daily that job planning, materials and equipment are ready at the start of each production shift, • Accurately completes necessary production records and reports on a timely basis., • Leads continuous improvement in process throughput, scrap reduction, delivery to customer commitment, and cost reduction. Knowledge/ Skills /Experience: • A minimum of an Associate Degree in Manufacturing Technology, Engineering, Management, or similar field, • Minimum of five years’ of work experience leading and developing a team., • Minimum of five years’ experience working in a manufacturing environment, ideally in a foundry., • Knowledge of Microsoft office Products (Outlook, Excel, PowerPoint, Word, etc.), • Working knowledge of ISO standards and Internal Audits., • Demonstrated strong analytical problem-solving skills. Work Remotely: No Job Type: Full-time Salary: $100,000.00 - $120,000.00 per year plus discretionary bonus. Benefits: • 401(k), • 401(k) matching, • Dental insurance, • Employee assistance program, • Health insurance, • Health savings account, • Life insurance, • Paid time off, • Vision insurance

Job DescriptionWhy Turtle? At Turtle, we’re redefining what it means to be an industry leader in electrical distribution, and we want you to be part of our exciting journey! For over 100 years, we’ve built a reputation for innovation, excellence, and exceptional customer service—and we’re just getting started. We are a diverse, passionate team spread across the US, Canada, Mexico, and Puerto Rico, committed to growth, learning, and creating opportunities for each other. At Turtle, every day is a chance to make a real difference, solve complex challenges, and push the boundaries of what’s possible. We believe in fostering an environment that inspires collaboration and sparks creativity, where employees are empowered to contribute to our mission and shape the future of the industry. If you're looking for a fast-paced, dynamic career where your ideas are valued and your growth is prioritized, Turtle is the place for you. Join us and be a part of a company that’s making waves and empowering its people to do extraordinary things every single day! About the Role Turtle is seeking an Operations Manager in Syracuse/Rochester, New York who will be responsible for managing the day to day activities of a branch while evaluating current and proposed systems and procedures. Recommends changes when necessary and assists in the implementation of new processes. This individual will perform a variety of tasks while leading and directing the work flow of others. The Operations Manager reports to the Branch Manager and Corporate Operations. This individual must be able to travel to both branches in Syracuse and Rochester. What You’ll Do: • Audit and standardize all system processes and procedures, • Interview, hire, terminate, discipline and prepares annual reviews, • Streamline administrative functions for Customer Service, Warehouse, and Sales, • Lead continuous improvement efforts, • Oversee Fiscal accountability and Monthly/Year End Closings, • Inventory Control/Cycle Count, • Oversee Branch Claims:, • Freight, • Insurance, • Workers Compensation, • Manage financial reports:, • Unbilled Tickets, • Cycle Count Adjustments, • Open Sales & Purchase Orders, • Non-stock and Unavailable Inventory Management, • Returns: OERMS/PORMS, • Warehouse Transfer Exceptions, • Order Entry Exceptions (OEIX), • Oversee branch personnel including billing, customer service, warehouse, inventory control, and sales, • Review all daily branch activities, • Training and development of branch personnel, • Payroll, • Facilities Maintenance, • Branch Replenishment, • Employee Sales, Credit Card, Cash, and COD account reconciliation, OEROB (cash balancing report), • Resolving branch disputes with Corporate Accounting:, • Accounts Payable, Accounts Receivable, Invoice Processing, • Trouble Shooting/Problem Solving, • Record Retention:, • Receipts, Packing Slips, Billing, OEROB, Manifests, • HS Diploma + min 2 Year College Degree or equivalent work experience, • 8+ year of Warehouse Operations experience, • Must have warehouse and staff management experience, • Experience with Warehouse Management Systems preferred, • Must be able to read, count accurately, do simple math (add, subtract, multiply, divide) and write legibly., • Ability to follow and provide directions with emphasis on safety Ability to multi-task and meet tight deadlines Ability to be flexible, • Ability to lift 50 pounds, • Proven Leader with readiness to actively participate in all warehouse activities, • Forklift certified We offer a competitive benefits package that includes: • 401(k) plan, • Health insurance, • Dental insurance, • Vision insurance, • Life insurance, • Paid holidays, • Vacation Founded in 1923, Turtle is a fourth-generation, family-owned, and three-generation women-owned business, and one of the nation’s largest independent electrical and industrial distributors. Headquartered in Clark, NJ, our Electrical Distribution division operates 14 branches spanning from coast to coast. It is a significant force in the engineering and procurement of power distribution, automation, lighting, and energy projects, offering integrated services for the industrial and construction markets. Turtle Integrated provides on-site MRO procurement, cost-saving, and spend analytics across the US and in Canada, Puerto Rico, and Mexico. What To Do Next You can begin by filling out our application online. If you want to learn more about Turtle, please visit our website or our LinkedIn: @Turtle. Turtle is proud to be is an equal opportunity employer that is committed to diversity and inclusion in the workplace. We prohibit discrimination and harassment of any kind based on race, color, sex, religion, sexual orientation, gender identity or expression, national origin, disability, genetic information, pregnancy, marital status, military or veteran status, or any other protected characteristic as outlined by federal, state, or local laws.

$40,000 Student Loan Repayment Or $30,000 Sign-on Bonus for Individuals Who Have Not Previously Participated in this Program Optum is seeking a Nurse Practitioner or Physician Assistant to join our Home-based Medical Care team in Onondaga County, NY. Optum is a clinician-led care organization, that is creating a seamless health journey for patients across the care continuum. As a member of the broader Home and Community Care team, you'll help bring home-based medical care to complex, chronic patients. This life-changing work helps give older adults more days at home. At Optum, the integrated medical teams who practice within Home and Community Care are creating something new in health care. Together, we are bringing high-end medical service, compassionate care and industry leading solutions to our most vulnerable patient populations. Our holistic approach addresses the physical, mental and social needs of our patients wherever they may be - helping patients access and navigate care anytime and anywhere. We're connecting care to create a seamless health journey for patients across care settings. Join our team, it's your chance to improve the lives of millions while Caring. Connecting. Growing together. Position in this function works as a provider member within the HBMC interdisciplinary team in the direct delivery of home-based medical care of a population within an assigned geography. Dedicated to improving the health and well- being of patients, this position collaborates with the PCP, HBMC interdisciplinary teammates and consultants, and as needed, the health plan Medical Director and other health professionals, to develop and carry out patients' goals of care in all phases of the patient journey. Primary Responsibilities: • Practices in accordance with the respective state laws and regulations governing the practice of advanced practice nursing, • Understands and complies with long-term care policies and procedures, including those that regulate nursing facilities and assisted living communities, • Establishes and maintains effective relationships with members and their legal representatives, facility staff, PCPs and other collaborating physicians/providers, • Performs an initial comprehensive assessment on all newly enrolled members and bi-annually thereafter. Develops a member management care plan upon enrolment and updates it as needed when changes in condition warrant or following hospitalization. Meets with members and/or their legal representatives to review newly developed or modified care plans; involves the PCP in these meetings, • Completes follow-up and post-hospital assessments according to documented standard operating procedure, • Prescribes appropriate diagnostics and interventions to avoid unnecessary transfers/acute admissions, • Consults with hospital physicians following notification of member transfer, • Collaborates with UM staff and PCPs/facility staff to enable medical necessity determinations for requested medical services, • Educates members and/or their legal representatives in disease processes affecting members and ways to manage them effectively, as well as to promote wellness, • Provides counsel, support and education to facility staff, • Supports FCMs in developing and providing in-service educational programs to facility staff, • Participates in management meetings that include, but may not be limited to:, • Weekly case conference reviews, • Monthly staff meetings, • Schedule Joint Operating Committee meetings, • Quarterly Quality Improvement Committee meetings, • Continuing education/journal club programs, • Implements HEDIS measure campaigns and other quality initiatives as directed by Corporate Health Services to ensure the highest standards of care and to promote the improvement of care management and delivery, • On-call for caseload during business hours. May require some participation in clinical on-call program as plan expands, • Keeps current on relevant medical and nursing research, technology, and related issues by attending continuing education courses, professional meetings and journal reviews, • Perform related duties as necessary and other duties as assigned You'll be rewarded and recognized for your performance in an environment that will challenge you and give you clear direction on what it takes to succeed in your role as well as provide development for other roles you may be interested in. Required Qualifications: • Completion of Nurse Practitioner or Physician Assistant accredited program, • Current state RN license if Nurse Practitioner, • Current NP or PA license, • Certification through the American Academy of Nurse Practitioners (AANP), American Nurses Credentialing Center (ANCC), or the National Commission on Certification of Physician Assistants (NCCPA), • Knowledge of long-term care, community resources and cost-effective alternatives regarding patient care delivery systems, • Access to reliable transportation; if you are driving a vehicle, you must comply with all the terms of the Landmark Motor Vehicle Safety policy Preferred Qualifications: • 2+ years of clinical experience, • Knowledge of CPT, ICD-9 and HCPC codes, • Knowledge of clinical standards of care, • Awareness NCQA requirements, CMS guidelines, Medicaid/Medicare contracts and benefit systems Compensation for this specialty generally ranges from $125,000 to $175,000. Total cash compensation includes base pay and bonus and is based on several factors including but not limited to local labor markets, education, work experience and may increase over time based on productivity and performance in the role. We comply with all minimum wage laws as applicable. In addition to your salary, we offer benefits such as, a comprehensive benefits package, incentive and recognition programs, equity stock purchase and 401k contribution (all benefits are subject to eligibility requirements). No matter where or when you begin a career with us, you'll find a far-reaching choice of benefits and incentives. OptumCare is an Equal Employment Opportunity employer under applicable law and qualified applicants will receive consideration for employment without regard to race, national origin, religion, age, color, sex, sexual orientation, gender identity, disability, or protected veteran status, or any other characteristic protected by local, state, or federal laws, rules, or regulations. OptumCare is a drug-free workplace. Candidates are required to pass a drug test before beginning employment.

Job DescriptionDescription: Job Summary: The FAT Technician reports to the Quality Assurance Manager to ensure successful Factory Acceptance Testing (FAT) and finished products meet the requirements of drawings and Feldmeier Equipment SOPs. The hours of this job are specific to the job being completed in a timely and efficient manner based off production and scheduling needs. Requirements: Essential Functions of Position: · Ensure all parts and components are moved to testing area prior to start of FAT · Perform assembly and pre-FAT inspection of equipment prior to customer arrival · Provide customers with professional assistance on overall FAT experience · Work with production staff, Quality, and Engineering · Coordinate and execute all testing as specified in FAT protocols to ensure compliance with Codes and Standards and Feldmeier SOPs. Testing includes drawing verifications, surface finish measurements, mechanical testing of accessories (agitation), and water / spray device testing using calibrated equipment · Communicate concerns to the Corporate Quality Assurance Manager and Plant Manager · Assist with closure of punch list items prior to shipping prep · Other duties as assigned to ensure efficient factory acceptance testing, tank shipment, and raw material receipt occur · Complete cross training in other areas to help with vacation coverage as needed · Comply with all Feldmeier safety and Company policies and Occupational Health and Safety Regulations. Minimum Qualifications: · Willingness to obtain and maintain a power industrial vehicle permit · Ability to read and interpret blueprints and drawings for final assembly · Good oral communication skills and ability to communicate with customers · Good organizational skills · Experience using basic hand tools required for assembly Preferred Qualifications: · Previous experience with Epicor our ERP system. · Electrical experience for wiring high and low voltage components Physical Requirements: · Ability to stand and/or walk for up to 8 hours per day. · Occasional lifting, carrying, and maneuvering up to 50 pounds. · Ability to climb ladders, stairs, and platforms for elevated work. · Walking, bending, squatting, kneeling, balancing, stooping, lie down inside or under vessel and twisting while performing required job tasks. · Being mindful of chemical safety and use proper PPE when required. · Ability to handle stress and fast paces environment. Job Title: FAT Technician Reports To: Quality Assurance Manager Classification: Non- Exempt Pay Range: $20.00 to 31.50

Job Description Company Overview: We're Hiring! At Bowers CPA’s& Advisors, we believe that great business decisions are powered by understanding the numbers behind the business. Our Client Accounting and Advisory services are built to provide modern, dynamic solutions for businesses that want to thrive. As a forward-thinking team of professionals, we support clients with strategic accounting guidance and the insights they need to navigate today’s fast-paced business environment. Not your typical CPA firm. We blend accounting expertise at all levels within a corporate structure with a deep understanding of our client’s business, making Bowers the trusted partner for clients looking for an outsourced solution to their accounting needs. Our Client Accounting & Advisory team is driven by a passion for helping clients grow, streamline operations, and meet their goals through smarter, data-driven decisions. Job Summary: Client Accounting and Advisory Services (CAAS) services include full-service CFO Advisory Services, Controller, bookkeeping, vendor bill processing and payment, customer invoicing, payroll processing and tax reporting; and sales tax preparation. If you’re ready to be part of a team that’s focused on delivering practical, high-impact solutions, we’d love to talk to you. Here, you’ll collaborate with innovative thinkers, and help businesses make the most of their financial and accounting opportunities. At Bowers CPA’s & Advisors, we value creativity, entrepreneurial spirit, and a commitment to excellence. Flexibility in the workplace. Requirements: • Oversee and manage responsibilities of assigned CAAS transactional staff, • Ensure completeness and accuracy of all transaction processing performed by CAAS transaction staff, • Perform monthly accounting reconciliations of bank and general ledger accounts for assigned clients, • Manage month-end close for assigned clients, • Assist with development of financial budgets, • Prepare and analyze financial reporting, • Assist in preparing proposals for CAAS services, • B.S. degree in Accounting or equivalent work experience, • Minimum of 5 years experience in accounting with 2+ years of supervisory experience, • Experience with QuickBooks preferred, • Proficiency in Microsoft Office Suite, specifically Word, Excel, and PowerPoint, • Excellent communicator, • Must have a high level of attention to detail and accuracy, • Strong verbal and written communication skills, • Strong organizational, problem-solving, and analytical skills, • Able to manage priorities and workflow Benefits: We offer tremendous growth and development opportunities, flexible work schedules, and a comprehensive compensation and benefits package to include, Health, Dental, Vision, Life, Long-Term Disability, 401k, Paid Time Off, Volunteer Time Off, Work, Life, Balance, Culture and More! EOE

Job DescriptionJob Title: Lab TechnicianJob Description The Laboratory Technician plays a critical role in ensuring customer, team member, and vendor satisfaction by performing tests on production and finished product samples. This position ensures compliance with FDA, NYS regulations, and company standards in support of manufacturing dairy-related products. Responsibilities • Achieve goals in production, safety, quality, performance, and cost., • Notify others of mechanical malfunctions to enhance productivity and equipment capabilities., • Comply with GMPs, SOPs, corporate and plant policies, rules, and regulations., • Provide assistance and support in production facilities as assigned by the supervisor., • Gain competence in line circuits and ensure proper hookups in the facility., • Cover breaks, lunches, and other staffing needs as assigned., • Comply with legal requirements concerning dairy processing and safety, reporting concerns to the supervisor., • Work safely and report safety concerns promptly, taking corrective actions as necessary., • Report food safety problems and support SQF by maintaining food safety and quality., • Ensure work areas are sanitary and adhere strictly to sanitation practices., • Communicate effectively between shifts and departments., • Conduct and evaluate product testing results to determine compliance with standards., • Release compliant products from hold using the computerized inventory management system., • Inspect and verify the sanitary condition of processing lines, fillers, tanks, and overall areas., • Validate vitamin additions and batching sheets for processing departments., • Maintain cleanliness of work areas and equipment., • Conduct microbiological, chemical, and sensory testing as required for finished products, in-process processes, and incoming materials., • Conduct bacteria/shelf life testing of fresh and stressed samples., • Maintain laboratory logbook and Hold/Disposition Log for the shift., • Log and send out COAs as testing completes., • Complete Titratable Acidity (TA) tests using all methods., • Conduct allergen testing as required., • Perform sterile sampling of tanks and report results in a timely manner., • Complete and report product testing using tally and Product Testing Record., • Perform cryoscope testing on milk products., • Verify product labeling accuracy., • Conduct EQA testing., • Complete shelf life sensory testing and attend training annually., • Perform butterfat and solids testing using appropriate equipment., • Conduct product sterility testing on samples received., • Update log and results for Product Hold and Disposition Log and follow up as needed., • Utilize LIMS system and verify analytical, sensory, and microbiological testing.Essential Skills, • Proficiency in basic to complex mathematical concepts including addition, subtraction, multiplication, and division, along with knowledge of weights and measures., • Ability to read, write, and communicate effectively in English., • Understanding of the company's mission, purpose, goals, and your role in achieving them., • Capability to operate facility equipment as required., • Completion of all company training requirements., • Ability to interpret company documents, literature, and UPC/code information.Additional Skills & Qualifications, • Minimum of a GED or High School Diploma required., • Associates degree in dairy/food sciences or equivalent is highly preferred. Eligibility requirements apply to some benefits and may depend on your job classification and length of employment. Benefits are subject to change and may be subject to specific elections, plan, or program terms. If eligible, the benefits available for this temporary role may include the following: • Medical, dental & vision • Critical Illness, Accident, and Hospital • 401(k) Retirement Plan – Pre-tax and Roth post-tax contributions available • Life Insurance (Voluntary Life & AD&D for the employee and dependents) • Short and long-term disability • Health Spending Account (HSA) • Transportation benefits • Employee Assistance Program • Time Off/Leave (PTO, Vacation or Sick Leave) Workplace Type This is a fully onsite position in East Syracuse,NY. Application Deadline This position is anticipated to close on Dec 22, 2025. About Actalent Actalent is a global leader in engineering and sciences services and talent solutions. We help visionary companies advance their engineering and science initiatives through access to specialized experts who drive scale, innovation and speed to market. With a network of almost 30,000 consultants and more than 4,500 clients across the U.S., Canada, Asia and Europe, Actalent serves many of the Fortune 500. The company is an equal opportunity employer and will consider all applications without regard to race, sex, age, color, religion, national origin, veteran status, disability, sexual orientation, gender identity, genetic information or any characteristic protected by law. If you would like to request a reasonable accommodation, such as the modification or adjustment of the job application process or interviewing due to a disability, please email for other accommodation options.

Job Description At TireHub we move more than tires – we move businesses forward, support communities, and help keep America rolling. And behind it all? Our people. We call them Hubbers – because they’re at the center of everything we do. From behind the wheel to the warehouse floor, from customer calls to corporate strategy, every Hubber plays a role in something bigger than themselves. And we show up every day ready to say yes – to challenges, to each other, and to getting it done right. Visit to learn more. Process Lead – Warehousing Role Summary: The Process Lead plays an integral role in streamlining and enhancing the efficiency of business operations. This position involves overseeing the development, implementation, and adherence to processes that improve workflow and reduce operational bottlenecks. By closely monitoring performance metrics and collaborating with various departments, the Process Lead ensures that the organization’s standards are met and that continuous improvement strategies are in place. The Process Lead expertise in process management enables them to identify areas for improvement, recommend solutions, and facilitate the adoption of best practices across the organization, ultimately supporting the achievement of business objectives with a focus on efficiency, quality and safety. When you say YES to something bigger: • Premium Free Hubber-Health Insurance, • TireHub funded Health Savings Account, • Additional benefit options including TireHub paid short/long term disability and life insurance benefits, • Paid vacation and holidays, • Parental leave programs, • Build your financial future with 401(k) including TireHub match, • Access to tire discounts, perks, and so much more! The individual must exhibit the following core TireHub commitments: · Approachable - If a company could smile, we would. Instead, we rely on our people to show it. We care about each other and our customers because we know business only gets done right when people respect each other and value relationships. · Adventurous - What TireHub is set up to do is intentionally outrageous. So, we readily embrace challenges with the courage to introduce new ideas and the ambition to build something unique. · Relentless - We tackle our work with energy. We deliver on our commitments with enthusiasm. And we don't give up until we get to the end. · Speedy - Speed is the currency in the tire industry. When we commit to a job, we get the job done – and we do it fast. Role Specifics: • Oversees the development and implementation of new processes to enhance productivity and efficiency within the organization., • Analyzes existing workflows and identify areas for improvement, recommending changes to minimize bottlenecks and streamline operations., • Facilitates cross-functional team meetings to ensure alignment on process improvement initiatives and gather input from various stakeholders., • Documents all process changes and updates, creating comprehensive manuals and guidelines for staff training and reference., • Implements quality control measures to ensure that all processes meet the required standards and comply with industry regulations., • Monitors the performance of implemented processes, using metrics and KPIs to assess their effectiveness and make adjustments as necessary., • Coordinates with the IT department to ensure that technological tools and systems are aligned with process requirements, optimizing software and hardware to support workflow enhancements., • Leads the transition management for process changes, ensuring that all staff are adequately trained on new procedures and that changes are smoothly integrated into daily operations., • Stays up to date on industry trends and best practices. Competencies: • Optimizes Work Processes: Knowing the most effective and efficient processes to get things done, with a focus on safety and continuous improvement., • Manages Ambiguity: Operating effectively, even when things are not certain, or the way forward is not clear., • Drives Results: Consistently achieving results, even under tough circumstances., • Collaborates: Building partnerships and working collaboratively with others to meet shared objectives, • 5+ years of applicable work experiences with a heavy focus on warehouse operations and warehouse management systems, • Experience leading diverse project teams with a proven track record., • Experience with KPI management, • Experience with Process improvement and an understanding of lean methodologies., • Strong leadership and team-building skills, • Demonstrated people skills including influencing skills, listening and the ability to communicate effectively to diverse groups., • Lead, motivate, influence and support RDC team within a time-sensitive and demanding environment., • Strong planning and organizational skills, including the ability to coordinate a variety of different projects and individuals and to adapt to unforeseen and unexpected requests or changes in priorities required., • Ability to collaborate with business leaders and peers across the organization to anticipate, identify, recommend, and implement creative operational and customer service solutions., • Proven track record of process improvement and operational excellence, • Excellent communication, problem-solving, and decision-making skills, • Highly analytical with a keen eye for detail Location: This position is remote. Candidates must reside on the Eastern side of the United States. Salary Range: $85,000 to $107,000 TireHub will consider the employment of all qualified applicants, including those with criminal histories, in a manner consistent with the requirements of applicable state and local laws. TireHub maintains a drug-free workplace in accordance with state and federal law.

Job Description Overview $7,500 Sign-On Bonus About Us Matrix Medical Network pioneered the first national in-home clinical network, and today we’re an independent provider of comprehensive health assessments serving people across the nation. We deliver exceptional, personalized care that improves health, lowers costs, and empowers people to live their best lives. With deep roots in clinical assessment and care management services, our national network of clinicians breaks through traditional barriers to care by meeting those members wherever they call home. We help older adults and other at-risk individuals enjoy a better quality of care, experience improved health outcomes, and identify chronic conditions that may otherwise go undiagnosed. Our job opportunities allow you to leverage your expertise and compassion to make a direct impact on the health and well-being of others. Join our team and be rewarded with competitive base plus incentive compensation and benefits while making a difference in the community! Responsibilities About the Role During a visit that can last up to one hour, Matrix providers review and observe a member’s current health, medical history, medication adherence, social environment and other risks. This provides unmatched insight into a member’s overall health and well-being that can be difficult to capture during routine office visits. The Matrix Comprehensive Health Assessment (CHA) helps to improve quality of care and allows us to potentially close multiple care gaps with a single visit. Our providers: • Conduct adult / geriatric assessments to include medical history, diagnosis and treatment, health education, physician referrals, case management referrals, follow-up and clear documentation according to Matrix guidelines and protocols, • Administer and order point of care and lab-based testing as needed, • Work with physicians, case managers, social workers, family members, key caregivers, and ancillary medical personnel as appropriate, • Collaborate with Primary Care Physician (PCP) on patient education and follow up as necessary, • Consistency – Although we conduct assessments Sunday – Saturday from 8 am – 7 pm, our full-time (FT) providers typically work Monday – Friday from 8:00 to 5:30., • Competitive Pay – Earn an annual base salary ranging from $105,500 - $168,400 based on market compensation analysis and experience., • Incentive Program – Includes uncapped quarterly incentive opportunities., • Benefits – Mileage reimbursement, medical, dental, vision, life insurance, PTO accrual, 401(k), paid holidays, continuing education time/reimbursement, and employee referral bonuses., • Education and Support – We invest in YOU! In addition to comprehensive onboarding training we will assign you a preceptor, provide 1:1 feedback, and offer free access to earn continuing education online., • Additional Licensure – Should business need exist; we will support you in obtaining additional state licensure and credentialing in neighboring states – or others you may want to visit while completing health assessments. Qualifications Skills & Experience That Shine • Master’s Degree OR commensurate experience and satisfactory completion of NP or PA licensure, • Current NP/PA licensure in state of practice to include prescription authority or the ability to obtain prescriptive authority as needed, • NCCPA, AANP, AACN or ANCC board certification in Adult, Adult Gerontology Primary Care, Adult Gerontology Acute Care, Family, Emergency or Acute Care specialty, • Current BLS, ACLS or CPR certification, • 1 year of NP or PA experience, • Able to travel up to 80-90% of the time for extended periods of time to include overnight travel and weekends across the assigned state and possibly neighboring states, • Valid state driver's license and proof of adequate automobile insurance coverage for the state of residence, • Strong computer skills and familiarity with employee health/medical record software, • Leading With Empathy & Trust – We believe in each other, which empowers all of us to connect with purpose and transparency. We take action from a place of trusting our peers, and we always have each other’s best interests at heart., • Diversity & Inclusion – The potential of our company is based on the diversity of experiences and backgrounds of everyone who works at Matrix. That’s why we’re proud of our diverse and talented team., • Committed to Career Advancement – The strength of our company is in its people. We’re committed to career progression and fostering an environment where employees can grow and thrive. By investing in our clinical and corporate teams, we enhance individual capabilities and strengthen the organization. Matrix Medical Network is an Equal Employment Opportunity Employer. It is the policy of Matrix to provide equal employment opportunities without regard to race, color, religion, sex, gender identity or expression, pregnancy, age, national origin, age, disability, marital status, veteran status, sexual orientation, genetic information or any other protected characteristic under applicable law. It is also the policy of Matrix that qualified individuals with disabilities receive equal opportunity in regard to job application procedures, hiring, and all aspects of the employment process. Matrix is committed to the full inclusion of all qualified individuals. Consistent with the Americans with Disabilities Act (ADA) and applicable state and local laws, it is the policy of Matrix to provide reasonable accommodation when requested by a qualified applicant or employee with a disability, unless such accommodation would cause an undue hardship. If reasonable accommodation is needed to participate in the job application or interview process, pre-employment testing, to otherwise participate in the selection process, to perform essential job functions, and/or to receive other benefits and privileges of employment, please contact . #LI-JJ1

Job Description • We are hiring immediately for full time GRILL COOK positions., • Location: Community Hospital - 4900 Broad Road, Syracuse, NY 13215 Note: online applications accepted only., • Schedule: Full time schedule. Days may vary, 11:30 am - 8:00 pm. Must be able to work every other weekend. More details upon interview., • Requirement: Cooking experience required. Morrison Healthcare is a leading national food and nutrition services company supporting more than 1,000 hospitals and healthcare systems across 46 states, many of which are recognized as U.S. News & World Report ranked Top Hospitals and Health Systems. For over 70 years, Morrison has been serving some of the nation’s largest health systems and bringing a culinary, nutritional, and operational expertise that truly transforms the healthcare dining experience. Morrison has more than 1,600 registered dietitians, 1,200 executive chefs, and 31,000 professional food service team members. The company has been recognized as one of Modern Healthcare’s Best Places to Work since 2012. Job Summary Summary: Prepares food and serves customers at the grill station in accordance with current applicable federal, state and corporate standards, guidelines and regulations to ensure high-quality food service is provided. Essential Duties and Responsibilities: • Takes orders from customer and prepares items requiring short preparation. Completes orders from steam tables and serves customers at multiple stations., • Serves customers in an efficient, friendly manner following established steps of service meeting outlined standards. Ensures food is at the correct temperature and is attractive and tasty. Tastes all prepared food items., • Uses established ticket-collection procedures during service. Responsible for records from area worked during service periods., • Uses approved recipes and production standards to ensure proper quality, serving temperatures and standard portion control., • Carries pans, kettles and trays of food to and from workstations, stove and refrigerator in accordance with established safety standards., • Stores foods in designated areas following standard wrapping, dating and food safety and rotation procedures., • Cleans, sanitizes and maintains all assigned work areas, equipment and utensils to ensure sanitation standards are met., • Resolves customer concerns and reports relevant information and concerns to supervisor., • Attends in-service and safety meetings., • Maintains good working relationships with coworkers, customers, administrators and managers., • Performs job safely while maintaining a clean, safe work environment., • Full-time and part-time positions are offered the following benefits: Retirement Plan, Associate Shopping Program, Health and Wellness Programs, Discount Marketplace, Identify Theft Protection, Pet Insurance, and other voluntary benefits including Critical Illness Insurance, Accident Insurance, Hospital Indemnity Insurance, Legal Services, and Choice Auto and Home Program Morrison Healthcare is a member of Compass Group. Compass Group is an equal opportunity employer. At Compass, we are committed to treating all Applicants and Associates fairly based on their abilities, achievements, and experience without regard to race, national origin, sex, age, disability, veteran status, sexual orientation, gender identity, or any other classification protected by law. Qualified candidates must be able to perform the essential functions of this position satisfactorily with or without a reasonable accommodation. Disclaimer: this job post is not necessarily an exhaustive list of all essential responsibilities, skills, tasks, or requirements associated with this position. While this is intended to be an accurate reflection of the position posted, the Company reserves the right to modify or change the essential functions of the job based on business necessity. Applications are accepted on an ongoing basis. Application Deadline: applications are accepted ongoing until all openings are filled for this position. If an applicant is declined due to the position being filled, they may still be considered for future opportunities and are always welcome to reapply. Morrison Healthcare maintains a drug-free workplace. We will consider for employment all qualified applicants, including those with a criminal history (including relevant driving history), in a manner consistent with all applicable federal, state, and local laws, including the City of Los Angeles’ Fair Chance Initiative for Hiring Ordinance, the San Francisco Fair Chance Ordinance, and the New York Fair Chance Act.

Job DescriptionDescription: Job Summary: The Production Supervisor position is quite varied regarding the scope of work performed. Tasks may include the following but are not limited to; oversee all daily operations of production and manufacturing to ensuring all Feldmeier Safety and Company policies and Occupational Health and Safety Regulations are followed. Requirements: Essential Functions of Position: · Plan, organize, delegate, and direct day-to-day operations to meet production schedule, production output, product quality and on-time shipping. · Strive daily to create and maintain a positive work environment, communicating with employees and supervisors to foster employee growth and positivity. · Review schedule daily to ensure all components and small parts are accounted for, and all employees have the resources needed to complete jobs by the due date. · Monitor schedule, planning ahead in the short, intermediate and long term, to ensure all components are on schedule and there are no delays in shipment, avoiding waiting periods and starting longer builds in front of shorter builds. · Communicate with the Plant Manager corporate scheduler to ensure customer shipping expectations are met and any potential delays are known in advance. · Work closely and communicate regularly with production services, purchasing, engineering and all management, ensuring to communicate any delays which could affect the ship date to the corporate scheduler. · Work closely and communicate regularly with Plant Manager to schedule preventative machine or rail maintenance to minimize the impact on production, and that necessary equipment repairs, internal and external are completed in a safe and timely manner. · Follow all SOPs and hold employees accountable for adhering to SOP’s to maintain continuity. · Work closely with QC and Grinding Trainer/Supervisor to ensure quality standards are met and maintained. · Ensure that all parts are processed accurately and efficiently, meeting or exceeding customer expectations. · Oversee the inventory management of our in-process parts, ensuring that all parts are properly labeled, stored and tracked. · Consistent awareness of ways to increase production and efficiencies, reducing and/or removing unnecessary costs without lowering current quality standards. · Allocate resources effectively and fully utilize assets to produce optimal results. · Support all safety procedures, addressing unsafe situations and actions on the spot to eliminate the hazard. · Work with HR to communicate hiring needs, training new hires as needed. · Coach employees in cooperation with HR to help maximize employee strength and growth abilities. · Review with HR all new hire employees to ensure they are being provided timely and adequate feedback. · Champion rewards and recognition efforts to help with retention and motivation. · Manage, develop, and retain the workforce needed for production schedule (in cooperation with HR). · Keeping employees accountable, discipline and carrying out separations of employment as needed. · Maintain cleanliness and organization, and all other duties needed to effectively operate the manufacturing facility. Minimum Qualifications: · 5 years of progressive experience in Metal Fabrication · Computer proficiency Preferred Qualifications: · 5-10 years of progressive experience in plant manufacturing · Previous experience holding teams accountable to KPI’s · Experience with Epicor for Dashboard utilization · Ability to handle stress. Physical Requirements: · Ability to stand and/or walk for up to 8 hours per day. · Occasional lifting, carrying, and maneuvering up to 50 pounds. · Ability to climb ladders, stairs, and platforms for elevated work · Walking, bending, squatting, kneeling, balancing, stooping, lie down inside or under vessel and twisting while performing required job tasks. · Comfortable in chemically Hazardous Situations. · Being mindful of chemical safety and use proper PPE when required. · Being able to hold a 4-8lb grinder for prolonged periods, while applying force. · Ability to grasp welding torch while welding parts for brief periods to long periods of time.

Job DescriptionDescription At C&S Companies, we believe work environment, culture, and the opportunity to learn and grow are key elements when considering a new job. We are just the right size to provide the resources and support you need without the burdensome bureaucracy of a large corporate environment. To that end, we foster a family-friendly and supportive workplace; collaborative and employee-focused with an emphasis on quality, integrity, trust, fun and accountability. Belonging is a top priority at C&S. We promote personal and professional growth by cultivating and sustaining a safe, inclusive atmosphere where everyone feels a sense of belonging. By encouraging employees to bring their whole selves to work, we create a diverse and equitable environment where all our voices are heard. Position Overview We are seeking experienced Inspectors to be responsible for construction/transportation inspection services on a variety of projects such as bridge/roadway/rail road/intersection/trail repair, replacement and new construction in these NY State cities and locations: Counties of Albany, Broome, Cayuga, Cattaraugus, Chautauqua, Chenango, Clinton, Cortland, Delaware, Erie, Genesee, Jefferson, Lewis, Madison, Monroe, Niagara, Oneida, Onondaga, Ontario, Oswego, Otsego, Putnam, Schoharie, Sullivan, Tioga, and Tompkins, as well as the greater Syracuse, Buffalo, and Albany areas. Opportunities may also exist in support of our Railroad efforts in New Jersey and Northern Pennsylvania. Why Take a Field Assignment With C&S? • We provide full construction support for our field staff throughout the entire assignment., • We offer a great employee benefits package including health insurance, paid holidays, paid vacation, sick time, life/disability insurances and much more., • It is our intent to provide continued employment ranging from temporary short-term assignments up to 1 year in length beginning March/April 2021 to multiyear assignments for candidates who possess additional skills in preparing contract documents, engineering workups and estimates., • We provide paid orientation/training and attentive management support including 24/7 emergency contact., • We provide personal safety equipment at no cost; some inclement weather gear and a clothing allowance for some work related items (i.e. steel toe boots)., • We reimburse work related mileage and tolls., • We pay for work related certifications including paid time off to take test and cost of testing., • Competitive hourly rate and a monthly cell phone stipend. Position Responsibilities: • Working largely independently, performs routine construction inspection services under the supervision of a Chief Inspector or Resident Engineer. May be responsible for review and assignment of work for Inspector(s)., • Duties include taking and documenting detailed measurements for payment, supervising material testing, notifying supervisor of issues and potential deviations from plans and specifications, and working with the contractor to resolve minor issues without guidance., • This position requires full knowledge of company standards, plans, and New York State DOT specifications. Qualified candidates will demonstrate familiarity and competence with various common job site conditions, will be able to clearly communicate project requirements to a contractor, and have the ability to resolve day-to-day disputes with a contractor, as well as have the experience required to know when to elevate an issue to their supervisor, all while maintaining detailed records of work and measurements and documentation for payment., • Utilize safe work practices in accordance with federal, state, local, and company standards., • Communicate incidents, accidents, near misses, potential hazards, and unsafe working conditions to a supervisor or the Health and Safety Department as soon as identified. Required Knowledge, Skills & Abilities: • Desired 5 years related experience, or similar position with experience in the construction field and transportation projects., • NICET Level III certification or successful completion of Fundamentals of Engineering exam required. Estimated Compensation Range: $79,040- 95,680.00/year* Learn about our comprehensive Benefits *Actual compensation may vary based on related work experience, geographical location and market conditions, education/training, certifications, and other credentials, as well as applicable knowledge and skills. WHO WE ARE: C&S Companies is a national planning, design, and construction firm with more than 600 employees and growing. For more than 50 years we have been delivering critical infrastructure design, planning and construction services in aviation, civil/site infrastructure, construction and program management, construction/design-build, energy, environmental, facilities, architecture, planning, sustainability, and transportation. We have offices throughout New York State, California, Florida, Michigan, Arizona, Pennsylvania, Ohio, Washington, and Kentucky. Equal Opportunity Employer/Protected Veterans/Individuals with Disabilities This employer is required to notify all applicants of their rights pursuant to federal employment laws. For further information, please review the Know Your Rights notice from the Department of Labor.

Job DescriptionFull job description GENERAL SUMMARY The Dietetic Technician is responsible for resident and participant nutrition care planning, implementation and evaluation under the supervision and guidance of the Registered Dietitian. The Dietetic Technician is a contributing member of the interdisciplinary team in establishing and implementing the interdisciplinary care plan. PRINCIPAL DUTIES AND ESSENTIAL FUNCTIONS Job duties specific to this position: Meal planning and menu development: Responsible for creating individual meal patterns to meet resident and participant needs/ preferences. Assists Dietitian in screening of residents or participants. May recommend diets and supplements. Ensures meals and snacks are served per planned menus. Coordinates resident's and participant’s meal selection in accordance with personal preference and diet regimen. Follows up with new enrollees/admissions regarding nutrition plan of care/acceptance. Nutrition Assessment: Accurately completes nutrition assessments, as assigned. Assists Dietitian in assessment of weight loss/gain of residents and participants. Completes required documentation thoroughly, accurately, and promptly (i.e., nutrition assessments, weight logs, admission and discharge, etc.). Reviews hospital discharge information when available. Monitoring and Tracking: Performs intake/output assessments through observation at mealtimes and documents findings. Reports any potential nutritional concerns to the Registered Dietitian. Assists Dietitian in the follow-up of nutrition complaints or concerns. Makes modifications as appropriate. Monitor weight trends. MDS completion. Communication: Communicates resident and participant comments regarding meal acceptance. Attend Interdisciplinary Care plan meetings. Nutrition Education: May provide diet counseling to residents or participants, resident/participant families, friends and staff regarding dietary restrictions. Maintaining Records: Participates in the Quality Assurance Program, surveys, audits and correction plans. Complies with all corporate policies and procedures, and adheres to federal, state and other sanitation guidelines. Maintains resident/participant meal profiles in the dining software system. Requirements: Promotes and role-models the mission of Menorah Park Demonstrates excellent internal and external customer service, excellent work attendance, reliability and work ethics. Attends and actively participates in required meetings and training sessions. Complies with established policies, procedures, and codes of conduct at all times. Adheres to all health and safety requirements, regulations, policies and procedures. Performs a variety of related duties as assigned. QUALIFICATIONS Two (2) years clinical or food service experience in a clinical setting, preferably in a long term/acute care organization. Associates degree in food service or nutrition related field. Dietetic technician registration is desirable. Proven organizational skills. Ability to work effectively in a collaborative environment. Ability to communicate effectively with participants, residents, and families from diverse backgrounds . Strong oral and written communications skills required. Basic computer skills required.

Job DescriptionDescription At C&S Companies, we believe work environment, culture, and the opportunity to learn and grow are key elements when considering a new job. We are just the right size to provide the resources and support you need without the burdensome bureaucracy of a large corporate environment. To that end, we foster a family-friendly and supportive workplace; collaborative and employee-focused with an emphasis on quality, integrity, trust, fun and accountability. Belonging is a top priority at C&S. We promote personal and professional growth by cultivating and sustaining a safe, inclusive atmosphere where everyone feels a sense of belonging. By encouraging employees to bring their whole selves to work, we create a diverse and equitable environment where all our voices are heard. Position Overview We are seeking experienced Inspectors to be responsible for construction/transportation inspection services on a variety of projects such as bridge/roadway/rail road/intersection/trail repair, replacement and new construction in these NY State cities and locations: Counties of Albany, Broome, Cayuga, Cattaraugus, Chautauqua, Chenango, Clinton, Cortland, Delaware, Erie, Genesee, Jefferson, Lewis, Madison, Monroe, Niagara, Oneida, Onondaga, Ontario, Oswego, Otsego, Putnam, Schoharie, Sullivan, Tioga, and Tompkins, as well as the greater Syracuse, Buffalo, and Albany areas. Opportunities may also exist in support of our Railroad efforts in New Jersey and Northern Pennsylvania. Why Take a Field Assignment With C&S? • We provide full construction support for our field staff throughout the entire assignment., • We offer a great employee benefits package including health insurance, paid holidays, paid vacation, sick time, life/disability insurances and much more., • It is our intent to provide continued employment ranging from temporary short-term assignments up to 1 year in length beginning March/April 2021 to multiyear assignments for candidates who possess additional skills in preparing contract documents, engineering workups and estimates., • We provide paid orientation/training and attentive management support including 24/7 emergency contact., • We provide personal safety equipment at no cost; some inclement weather gear and a clothing allowance for some work related items (i.e. steel toe boots)., • We reimburse work related mileage and tolls., • We pay for work related certifications including paid time off to take test and cost of testing., • Competitive hourly rate and a monthly cell phone stipend. Position Responsibilities: • An Office Engineer assists the EIC/Resident Engineer on daily management of construction inspection projects, providing technical and administrative information to others working on the project to ensure that work complies with all engineering standards, codes, and specifications. Responsibilities include, review of daily inspection reports and payment quantities in accordance with NYSDOT/MURK requirements, prepare change orders for overruns, changed conditions, and additional work as well as other project administration roles., • The Office Engineer must also be familiar with corporate policies and safety requirements., • Utilize safe work practices in accordance with federal, state, local, and company standards., • Communicate incidents, accidents, near misses, potential hazards, and unsafe working conditions to a supervisor or the Health and Safety Department as soon as identified. Required Knowledge, Skills & Abilities: • Desired 10 years of related experience, or similar position with experience in the construction field and transportation projects., • NICET III or equivalent experience, or EIT designation, • Bachelor's Degree desired. Associate's Degree acceptable with relevant experience, • Excellent communication skills, • Ability to supervise or coordinate the work of others, • Knowledge of NYSDOT's Equitable Business Opportunities (EBO) software Estimated Compensation Range: $83,200 - 101,920/year* Learn about our comprehensive Benefits *Actual compensation may vary based on related work experience, geographical location and market conditions, education/training, certifications, and other credentials, as well as applicable knowledge and skills. WHO WE ARE: C&S Companies is a national planning, design, and construction firm with more than 600 employees and growing. For more than 50 years we have been delivering critical infrastructure design, planning and construction services in aviation, civil/site infrastructure, construction and program management, construction/design-build, energy, environmental, facilities, architecture, planning, sustainability, and transportation. We have offices throughout New York State, California, Florida, Michigan, Arizona, Pennsylvania, Ohio, Washington, and Kentucky. Equal Opportunity Employer/Protected Veterans/Individuals with Disabilities This employer is required to notify all applicants of their rights pursuant to federal employment laws. For further information, please review the Know Your Rights notice from the Department of Labor.

Job DescriptionWith a network of nearly 200 branches, Loomis armored transportation, cash management centers, and cash inventory vaults keep cash flowing throughout financial institutions and retail businesses across the US. Loomis prides itself on providing employees with opportunities for career advancement and job satisfaction. In fact, many of our company’s managers, vice presidents, and corporate executives started out in the branches as driver/guards and tellers. Our work can be challenging, but the thousands who have stayed with our company for decades will tell you that if you have the desire to learn and the drive to succeed, Loomis is the place to be. Come join our team! Pay Rate: $22.11 per hour Shift Start Time: 1:30PM Job Description As a Vault Lead, you work with your team to maintain inventory in our cash vaults for our Loomis customers. Responsibilities • Check identifying numbers or seals on bags of deposits and/or change shipments against the receipts accompanying each bag, or against the provided manifests, • Count items, record amounts and serial numbers, sign and date receipts and manifests, • Load/unload wagons or flatbed carts with bags/boxes of coin, • Sort individual cargo items by route, • Communicate verbally with co-workers and with customers via telephone Requirements • Ability to load/unload bags/boxes of currency, checks, and coin weighing an average of 50 lbs. per item several times during a 6-to-10-hour shift, 5 to 6 days a week, • Ability to push wagons, carts, buggies, dollies loaded with cargo weighing up to several hundred pounds, • Unrestricted ability to repetitiously bend, stoop, squat, stand, walk, climb, twist, turn, and reach out, • Ability to perform repetitious lifting of items weighing an average of 50 lbs. each from floor, • Ability to walk continuously between bins, vaults, booths, and counters, • Ability to stand on concrete floor approximately 80 percent of shift, • Ability to sign and record numbers by hand and to make entries on records and prepare reports., • Ability to count, add, subtract and balance columns of numbers, • A valid firearms permit or ability to pass applicable firearms requirements per the state to which you are applying is required. Working Conditions • Work in a room within a vault with little or no exposure to outside light, • Full-time schedule can potentially consist of an average of 40 to 50 hours/week, with a minimum of 5 days during a 6-day period Essential Functions/Job Qualifications • Ability to maintain a stooped or squatting position for several minutes to perform the sorting function., • Ability to walk continuously between bins, vaults, booths, counters., • Ability to stand on concrete floor approximately 80 percent of shift., • Ability to read and speak the English language sufficiently to converse with co-workers and customers, and to read receipts, manifests and reports., • Ability to sign and record numbers by hand and to make entries on records and prepare reports., • Ability to count, add, subtract and balance columns of numbers., • Lift: 25lbs vertical lift from 10 inches to 66 inches from the floor (1X), • Lift-Carry: 18lbs vertical lift from 1 inch to 44 inches from the floor, and horizontally transfer 15ft (4X), 18lbs vertical lift from 10 inches to 36 inches from the floor and horizontally transfer 300ft (1X) and 50lbs vertical lift from 10 inches to 36 inches from the floor and horizontally transfer 2ft (2X), • Push-Pull: Horizontally transfer 47lbs of force on a sled (single, non-dominant arm), a distance of 1ft (2X), • Repetitive Coupling: Squeeze Jamar Hand Dynamometer requiring forces up to 30lbs / both right & left hands (4X each) Benefits Loomis offers one of the most comprehensive employees benefit packages in the industry, which includes: • Vacation and Sick Time (PTO) as well as Paid Holidays, • Health & Dental Insurance, • Vision Insurance, • 401(k) Plan, • Basic Life Insurance Plan, • Voluntary Life Insurance Plan, • Flexible Spending and Health Savings Account, • Dependent Care Account, • Industry leading Training and Development Loomis is an Equal Opportunity Employer and Drug Free Workplace. Qualified applicants will receive consideration for employment without regard to their race, color, religion, national origin, sex, sexual orientation, gender identity, protected veteran status or disability.Company DescriptionWith a network of nearly 200 branches, Loomis armored transportation, cash management centers, and cash inventory vaults keep cash flowing throughout financial institutions and retail businesses across the US. Loomis prides itself on providing employees with opportunities for career advancement and job satisfaction. In fact, many of our company’s managers, vice presidents, and corporate executives started out in the branches as driver/guards and tellers. Our work can be challenging, but the thousands who have stayed with our company for decades will tell you that if you have the desire to learn and the drive to succeed, Loomis is the place to be. Come join our team!With a network of nearly 200 branches, Loomis armored transportation, cash management centers, and cash inventory vaults keep cash flowing throughout financial institutions and retail businesses across the US. Loomis prides itself on providing employees with opportunities for career advancement and job satisfaction. In fact, many of our company’s managers, vice presidents, and corporate executives started out in the branches as driver/guards and tellers. Our work can be challenging, but the thousands who have stayed with our company for decades will tell you that if you have the desire to learn and the drive to succeed, Loomis is the place to be. Come join our team!

Job Description CONTROLLER Company Overview: L. & J. G. Stickley, Inc. (Stickley) is a leader in the furniture manufacturing and retail industries, with brands that are respected and cherished worldwide. We're building something rare: a brand with a 125-year legacy, a fully owned supply chain, and a newly developed direct-to-consumer (D2C) platform built from the ground up. The Controller plays a critical role in supporting Stickley's continued success by ensuring financial health, operational efficiency, and strategic decision-making across the organization. This role demands a strong commitment to accurate financial reporting, regulatory compliance, and the implementation of robust internal controls-all of which are essential to maintaining stakeholder trust and driving sustainable growth. General Description/Purpose: The Controller will plan and direct the financial reporting, planning and analysis, and accounting operations of the company. • Planning, directing, and coordinating all accounting operational functions, including accounts payable, receivable, bank reconciliations, and payroll., • Maintaining general ledger, chart of accounts, and coordinating month end closing, • Coordinating and preparing internal and external financial statements, • Providing management with information vital to the decision-making process, • Managing the budget process, • Assessing current accounting operations, offering recommendations for improvement, and implementing new processes, • Evaluating accounting and internal control systems, • Evaluating the effectiveness of accounting software and supporting database, as needed, • Developing and monitoring business performance metrics, • Hiring, training and retaining skilled accounting staff Job Responsibilities: • Responsible for monthly, quarterly, and annual internal and external financial reporting in accordance with US GAAP, • Oversee Accounting team including Accounting Manager, Cost and Staff Accountants, Business Analysts, Accounts Payable and Receivable, and Payroll, • Coordinate annual budgeting, planning, and ongoing forecasting process, including cash flow, • Design, implement and maintain effective accounting processes, policies, and internal controls, • Oversee development of standard labor and overhead rates, product costing, and inventory valuation, • Responsible for the accounting for capital leases, capital expenditures, and fixed assets, • Manage corporate credit cards program and T&E reimbursement, • Maintain relationship with outside parties, including payroll service providers, customers, vendors, banks, and external auditors., • Work closely with division heads and senior management on monitoring of financial performance of manufacturing, retail, and supporting SG&A divisions., • Work closely with our Controller in Vietnam on financial reporting, budgeting, planning, and analysis., • Work closely with Division Heads to plan, monitor and execute timely physical inventory counts., • Actively participate in the financial analysis, planning, and modeling for revenue generation and cost reduction, • Assist in strategic and operational decision making by providing recommendations and reasoning for a conclusion, • Involvement with financing and contracts., • Bachelor's degree in Accounting or Business Administration, • Certified Public Accountant or Certified Management Accountant designation preferred. Required Experience: • Ten years or more of related experience. Essential Skills: • Exceptional knowledge of finance, accounting processes, budgeting, cost accounting, internal controls, and Generally Accepted Accounting Principles (GAAP), • Advanced knowledge of ERP and Payroll systems, Microsoft Excel, Power BI (or other comparable BI tool), • Excellent written and verbal communication skills, • Good collaboration skills, • Strong attention to detail and critical thinking skills, • Strong analytical and problem-solving skills, • Self-starter and ability to handle pressure, • Excellent organizational and time management skills, • Ability to communicate and present effectively with various levels, departments and leaders, • Must have high ethical standards & demonstrate positive professional image, • Transfer pricing skills preferred We offer a competitive compensation and a comprehensive benefit package that includes: • Paid Time Off (PTO), • Group health, prescription, vision, and dental coverage, • Company paid life insurance, • 401(k) retirement plan with company match, • Flexible spending account, • Generous employee discount, • Stickley "Fit for Life" Wellness Program, • Corporate YMCA discount The compensation range provided in this job posting is a general guideline. When extending an offer, Stickley considers factors including but not limited to the role and associated responsibilities, location, and market and business considerations, as well as the candidate's work experience, key skills, and education/training. Stickley is an equal opportunity employer committed to diversity and inclusion Job Posted by ApplicantPro

Job Description Company Overview: L & J. G. Stickley, Inc. (Stickley) is a leader in the furniture manufacturing and retail industries, with brands that are respected and cherished worldwide. With over 125 years in furniture manufacturing, and more than 90 years as a furniture retailer, Stickley is the proud employer of nearly 800 talented individuals. We have three manufacturing facilities, multiple corporate-owned retail showrooms, and a global distribution network. General Description/Purpose: The Director, MFG Operations, will lead the Manlius site with a Lean-first mindset, driving safety, quality, delivery, and cost out initiatives. This role is responsible for production, facilities maintenance, manufacturing engineering, continuous improvement and environmental, health and safety. The Director, MFG Operations, is a hands-on change agent with deep understanding and experience in Lean principles, including Daily Management, and will be expected to set multi-year strategy and deliver measurable results on the shop floor. Job Responsibilities: • Lean Transformation & Strategy - Develop & execute multi-year manufacturing and continuous improvement policy deployment strategy aligned to business goals and factory margin targets., • Daily Management – sustain tiered meetings, implement leader standard work, and conduct regular Gemba walks, • Standard Work & Problem Solving – institutionalize standard work, A3 thinking, PDCA and root cause analysis (5 why, fishbone, etc.), • Value Stream Performance – Lead value stream mapping (VSM) activities to drive improvements in production flow and on time delivery (OTD), • Automation & Technology – identify & justify automation solutions to improve flow, improve quality and reduce cost, • Quality at the Source – partner with Quality team to implement error proofing and layered process audits to improve yield and reduce rework, • Sales, Inventory & Operations Planning (SIOP) – support SKU rationalization, conduct capacity planning to align demand, mix and resources, • Compliance & Safety – partner with EH&S manager to ensure compliance and drive YOY improvement in safety metrics, • People Leadership – build capability via cross-training, set clear goals, conduct performance reviews, drive headcount planning, and document succession planning, • Financial Stewardship – own expense budgets and cost out project hopper, track & report on results, • New Products - Support new product development / Market launch activities Required Experience / Essential Skills: * • 10+ years progressive manufacturing leadership experience, • Demonstrated success driving policy deployment, implementing Kaizen events, and driving cost out initiatives, • Good collaboration and organizational skills and ability to prioritize, • Demonstrated success driving cross-functional change, • Excellent communication skills, • Good computer skills (proficient with Microsoft Excel, Word, PowerPoint) We offer a competitive compensation and a comprehensive benefit package that includes: • Paid vacation, • Personal Day, • Perfect Attendance Days, • Group health, Rx, dental insurance coverage, • Company paid life insurance, • 401(k) retirement plan, • Flexible spending account Stickley is an equal opportunity employer committed to diversity and inclusion. Job Posted by ApplicantPro

Job Description For more than 45 years, CXtec has been helping organizations maximize value in their IT investments. We are the largest secondary market network hardware provider in North America. Today, we remain focused on providing creative lifecycle management solutions for organizations of all sizes, all over the world. We’re looking for a highly motivated, results-driven inside sales professional to join our dynamic team. The CABLExpress Enterprise Sales Manager leads and develops a team of sales professionals focused on driving growth in structured cabling solutions for enterprise data centers. The ideal candidate will have 3-5 year’s sales team management experience, with demonstrated success hiring, assessing, coaching and motivating sales team. The base salary range for this role is $75,000 to $125,000 + uncapped Incentive earnings, offering significant upside potential. Final compensation will be determined based on a variety of factors including geographic location, skills, relevant education, experience, certifications, and overall alignment with business and organizational needs. Location: This position is based in Syracuse, NY SUMMARY: This role combines strategic sales execution with team leadership, ensuring the team meets or exceeds sales targets through effective coaching, performance management and process optimization. In collaboration with the Senior Director of Sales, this role translates strategy into execution, ensuring reps develop new enterprise relationships and grow revenue across existing accounts ESSENTIAL FUNCTIONS: • Lead, coach, and mentor the CABLExpress enterprise sales team to achieve sales targets through instruction and example., • Drive accountability for individual rep KPIs, including activity metrics, opportunity creation, pipeline progression, and closing ratios., • Support the execution of sales playbooks, prospecting cadences, and campaign follow-up sequences that align with corporate objectives., • Engage directly with key enterprise accounts to support major opportunities, renewals, and customer expansion., • Provide data-driven insight through timely forecasting, CRM hygiene, and performance analytics to leadership., • Work with the Sr. Director of Sales to develop/execute strategic growth plans for the team and company., • Strive to be an industry expert in IT lifecycle space including Enterprise Networking, Collaboration, Data Center and, • Security., • Implement market and target customer strategies highlighting CABLExpress and Sustainable IT Lifecyle Management leading to sales., • Monitor team pipeline and provide timely, accurate forecast to leadership., • Coach sales reps in prospecting, value proposition delivery, negotiation, deal qualification and closing skills., • Develop strong territory and account management plans in conjunction with the Sales reps., • Direct engagement with customers in the territory., • May have additional responsibility for maintaining direct accounts., • Responsible for identifying hiring needs, overall recruitment and onboarding of new team members and performance management of existing reps., • Track and manage sales measurements that indicate success or challenge areas., • Maintain consistent and clear lines of communication with other departments to develop and drive business., • Conduct daily/weekly/monthly sales meetings to ensure success of the territory., • Interact with training to ensure team receives appropriate levels of training., • Collaborate with marketing and support efforts to execute and drive campaign effectiveness., • Bachelor’s degree or equivalent experience., • 3-5 year’s sales team management experience, with demonstrated success hiring, assessing, coaching and motivating sales team., • Experience in a high technology field preferred., • Familiar with managing and assisting in large solution-based projects., • Ability to organize and manage multiple priorities, while demonstrating strong attention to detail, appreciation of deadlines, and commitment to follow-up is essential., • Demonstrate strong analytical, problem solving and decision-making skills., • Exhibit strong teamwork and interpersonal skills., • Ability to work collaboratively with personnel/departments throughout the organization., • Strong verbal and written communication skills., • Exhibit strong resourcefulness through innovative problem solving and leveraging available resources effectively and timely., • Strong customer orientation., • Demonstrate enthusiasm and commitment to the job and the company core values. Comprehensive benefits package includes: • Health insurance and prescription drug coverage, • Dental and Vision insurance, • Company-paid life insurance and voluntary life options, • Company paid short-and long-term disability, • Critical illness, accident and hospital indemnity insurance, • Flexible spending accounts, • Pet insurance, • Traditional and Roth 401(k) retirement plan with company match, • Tuition reimbursement and Employee Assistance Program, • Paid vacation, sick/personal days and holidays, • Flexible work arrangements As a condition of employment, upon offer, candidates will be required to participate in a background check and complete a pre-employment drug screen. We are proud to be an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to age, race, creed, color, national origin, religion, pregnancy, reproductive health decisions, sexual orientation, protected veteran or military status, sex, disability, marital or familial status, domestic violence victim status, gender identity or expression, predisposing genetic characteristics, criminal history or any other legally protected class. Individuals will not be discriminated against on the basis of disability.

Job Description Take the next step in your career with Morrison Living as a Clinical Nutrition Manager in SYRACUSE, NY! Location: Morrison Living at Loretto Health Setting: LTC Schedule: Monday - Friday Requirement: Must be Registered Dietitian with a valid CDR # Salary: $85K-$95K We go the extra mile for our Dietitians with benefits designed to support education, career growth, and professional success! Special perks include: • Education Reimbursement – Financial support for advanced learning, • Career Advancement – Growth programs tailored to RDNs, • Board Certifications – Financial rewards for obtaining specialty certifications, • Relocation Assistance – Support when moving 50+ miles (based on location), • Professional Membership Dues, CDR, & Licensure Coverage – We cover your professional fees, • Free CEUs – Through our nutrition education webinar series Why Choose a Career as a Compass Group Dietitian? Compass Group employs over 3,000 RDNs across the United States, making us one of the nation’s largest employers of Dietitians in a variety of settings: • Hospitals and healthcare systems, • Senior living communities, • Schools and universities, • Corporate wellness programs, • Food service operations We offer unmatched opportunities for professional growth: • Specialization, • Leadership development, • Cross-functional career paths The company has earned significant recognition, including being named one of Modern Healthcare's "Top 100 Best Places to Work in Healthcare" for five consecutive years, and appearing on Training Magazine’s Top 125 Organizations list for six straight years. At Compass Group, we prioritize your well-being, work-life balance, and career growth with a comprehensive benefits package: • Health & Wellness – Medical, dental, and vision plans for you and your family, • Financial Security – Life insurance, AD&D, and disability coverage, • Retirement Ready – 401(k) and retirement plans to invest in your future, • Time Off – Flexible/Paid Time Off and holiday pay (varies by site/state), Paid Parental Leave, Personal Leave, • Exclusive Perks – Shopping discounts, commuter benefits, and more, • Wellness & Support – Employee Assistance Program, FSAs, and health programs Key Responsibilities: • Establishes goals and oversees implementation of clinical nutrition care based upon the facility’s medical direction and patient/ resident population, • Assesses the nutritional status of patients/residents through documentation in the medical record, • Hires, leads, directs, coaches, trains, and develops nutrition team members, • Trains and mentor’s patient/resident services staff and interns as applicable, • Fosters teamwork and establishes effective strategies to implement innovative programs leading to optimal clinical nutrition and financial outcomes, • Monitors competency, productivity, and documentation accuracy of clinical staff, • Assigns and directs the workload of the clinical nutrition staff. Participates in staffing analysis to ensure adequate staffing in collaboration with the Regional Clinical Nutrition Manager and the Director of Clinical and Wellness Support, • Complies with regulatory standards, including federal, state, and accrediting agencies while adhering to facility confidentiality, HIPAA regulations, and patient/resident rights policies, • Participates in/ Leads patient /resident satisfaction programs, departmental meetings, and facility wide Quality Assurance/Performance Improvement programs Qualifications: • Credentialed as a Registered Dietitian by the Commission on Dietetic Registration (CDR), • Licensed by the State Dietetics Licensing Board, in states where required, • Two (2) years of experience in acute care, Three (3) years in senior living, as a Registered Dietitian, • Specialty certification when applicable Click here to Learn More about the Compass Story Associates may be eligible for additional paid and/or unpaid time off benefits in accordance with applicable federal, state, and local laws. For positions in Washington State, Maryland, or to be performed Remotely, click here for paid time off benefits information. Compass Group is an equal opportunity employer. At Compass, we are committed to treating all Applicants and Associates fairly based on their abilities, achievements, and experience without regard to race, national origin, sex, age, disability, veteran status, sexual orientation, gender identity, or any other classification protected by law. Qualified candidates must be able to perform the essential functions of this position satisfactorily with or without a reasonable accommodation. Disclaimer: this job post is not necessarily an exhaustive list of all essential responsibilities, skills, tasks, or requirements associated with this position. While this is intended to be an accurate reflection of the position posted, the Company reserves the right to modify or change the essential functions of the job based on business necessity. We will consider for employment all qualified applicants, including those with a criminal history (including relevant driving history), in a manner consistent with all applicable federal, state, and local laws, including the City of Los Angeles’ Fair Chance Initiative for Hiring Ordinance, the San Francisco Fair Chance Ordinance, and the New York Fair Chance Act. We encourage applicants with a criminal history (and driving history) to apply. Applications are accepted on an ongoing basis. Compass Group maintains a drug-free workplace.

Job DescriptionStaffing Network is seeking Plant Maintenance Technicians for a large Waste facility located in LIVERPOOL New York 13090. $22/hr.9am-5:30pm (Monday – Friday)Must be open to transitioning to Monday-Thursday 2pm-10:30pm, Friday 12pm-8:30pm.Resume required Interview required Job Summary • Responsible for monitoring and maintaining the operation of all plant systems and equipment. Including but not limited to balers, conveyor belts, gearboxes, electrical motors, pulleys, shafts and bearings., • Respond to all system failures by taking appropriate corrective action by completing or assigning the repairs needed to ensure that systems are operational and are functioning safely and efficiently., • Performs repairs in accordance with Waste Management Safety and Life Critical Rules and OSHA. (Occupational and Safety Health Act) requirements., • Performs preventive maintenance inspection (PM); diagnose, repair, and rebuild major equipment/components including but not limited to balers, conveyors, hydraulic power packs, eddy currents, electro-magnetic belts, optical sorters, diverters, compressors, trash compactors, motors, glass breakers, wire tie systems, fans, pumps, forklifts, front-end loaders and building equipment., • Maintains DEI (Daily Equipment Inspections) backlog., • Establishes and adjusts work procedures to meet production schedules and advises Sr. Plant Maintenance Manager if additional work is needed or cannot be completed within the Standard Repair Times (SRTs). . Inspects the quality of third-party repairs and or rebuilds., • Recommends measures to improve production, equipment performance and product quality., • Ability to multi-task and manage multiple priorities., • Performs service calls for emergency breakdowns., • Ability to perform under limited supervision., • Requires a flexible work schedule, which may include nights and weekends to support operating schedule and the needs of the facility., • Maintains a clean, safe work area in compliance with Corporate/OSHA Standards, and performs all work in accordance with established safety procedures. #ZRDFW

Job Description • We are hiring immediately for full time COOK positions., • Location: Helio Health Willows - 847 James Street, Syracuse, NY 13203 Note: online applications accepted only., • Schedule: Full time schedule. Days and hours may vary. More details upon interview., • Pay Range: $18.00 per hour to $20.00 per hour We Make Applying Easy! Want to apply to this job via text messaging? Text JOB to 75000 and search requisition ID number 1481474. The advertised program is a conversational recruiting assistant that helps you apply to jobs with Compass Group. Message frequency varies. Message and data rates may apply. Text STOP to opt out or HELP for help. Terms and conditions: Application Deadline: applications are accepted ongoing until all openings are filled for this position. If an applicant is declined due to the position being filled, they may still be considered for future opportunities and are always welcome to reapply. Diversity of thought and inclusion for all is what drives our success - we invite you to start your journey with us today! Eurest is recognized worldwide for standards of service and excellence within the foodservice industry. Embracing an ownership mindset, Eurest leverages global resources, promotes a local presence and enriches the communities we serve. The Eurest Promise, “connect with people, inspire through food, create solutions, and live our promise,” is exemplified throughout our organization. Eurest is proud to serve the world’s most respected successful corporations, including many of the Fortune 500. Job Summary Summary: Prepares food in accordance with applicable federal, state and corporate standards, guidelines and regulations with established policies and procedures. Ensures quality food service is provided at all times. Essential Duties and Responsibilities: • Prepares high-quality food items according to standardized recipes and instructions to meet production, delivery and service schedules., • Serves meals or prepares for delivery by using correct portioning, meeting outlined standards, ensuring that food is at the correct temperature and is attractive and tasty. Tastes all prepared food items., • Uses established ticket collection procedures during service. Responsible for records from area worked during service periods., • Cleans kitchen after preparation and serving, maintaining high standards of cleanliness. Stores or discards excess food in accordance with safe food-handling procedures., • Keeps refrigerators and storerooms clean and neat. Ensures food and supply items are stored per standards., • Operates and maintains kitchen equipment as instructed., • Assists in production planning, record keeping and reporting as required., • Assists in the ordering and receiving of all food and supplies as required., • Reports needed maintenance, faulty equipment or accidents to the supervisor immediately., • Attends in-service and safety meetings., • Maintains good working relationships with coworkers, customers, administrators and managers., • Performs job safely while maintaining a clean, safe work environment., • Performs other duties as assigned., • Ensures proper presentation, portion control and maintenance of serving temperatures; follows HACCP standards., • Personal commitment to your own safety and that of others., • Abides by all Company policies and procedures including but not limited to:, • The use of a medium weight cut gloves when handling or using knives, peelers, choppers, mandolins or cleaning a slicer., • The use of oven mitts, fryer gloves or steamer gloves when handling hot pans from ovens, warmers or steamtables. Full-time and part-time positions offer the following benefits to associates: Retirement Plan, Associate Shopping Program, Health and Wellness Programs, Discount Marketplace, Identity Theft Protection, Pet Insurance, Voluntary Benefits, including Critical Illness Insurance, Accident Insurance, Hospital Indemnity Insurance, Legal Services, and Choice Auto and Home Program Full-time positions also offer the following benefits to associates: Medical, Dental, Vision, Life Insurance/AD, Disability Insurance, Commuter Benefits, Employee Assistance Program, Flexible Spending Accounts (FSAs) Associates may also be eligible for paid and/or unpaid time off benefits in accordance with applicable federal, state, and local laws. For positions in Washington State, Maryland, or to be performed Remotely, click here for paid time off benefits information. About Compass Group: Achieving leadership in the foodservice industry Compass Group is an equal opportunity employer. At Compass, we are committed to treating all Applicants and Associates fairly based on their abilities, achievements, and experience without regard to race, national origin, sex, age, disability, veteran status, sexual orientation, gender identity, or any other classification protected by law. Qualified candidates must be able to perform the essential functions of this position satisfactorily with or without a reasonable accommodation. Disclaimer: this job post is not necessarily an exhaustive list of all essential responsibilities, skills, tasks, or requirements associated with this position. While this is intended to be an accurate reflection of the position posted, the Company reserves the right to modify or change the essential functions of the job based on business necessity. Applications are accepted on an ongoing basis. Eurest maintains a drug-free workplace. Req ID: 1481474 [[req_classification]] We will consider for employment all qualified applicants, including those with a criminal history (including relevant driving history), in a manner consistent with all applicable federal, state, and local laws, including the City of Los Angeles’ Fair Chance Initiative for Hiring Ordinance, the San Francisco Fair Chance Ordinance, and the New York Fair Chance Act.

Job DescriptionJob Title: Quality Field Technician Job Description • The Quality Field Technician is responsible for ensuring that quality-related duties are completed efficiently to satisfy customers, team members, and vendors., • This role involves coordinating and supporting quality assurance on the manufacturing production floor, establishing and maintaining quality systems for producing high-quality products, and performing analytical testing to ensure product specifications are met in real-time., • Achieve assigned goals in production, safety, quality, performance, and cost., • Notify others of mechanical malfunctions to enhance productivity and equipment capabilities, and assist operators in resolving concerns., • Comply with GMPs, SOPs, corporate and plant policies, rules, and regulations., • Provide assistance and support to quality-related areas as assigned., • Ensure proper focus on quality checks performed by technicians and provide follow-up training as needed., • Perform finished pallet audits, end-of-shift product reviews, and other quality checks to ensure standards are met., • Track packaging/processing Key Quality Attributes (KQAs), identify problem areas and trends, and respond to operator quality questions., • Communicate effectively between shifts and departments, execute issue resolution, and escalate issues promptly., • Communicate product disposition and assist Operations with compliance to standards., • Maintain inventory accuracy of products in Quality Hold/retest status by performing routine cycle counts and reconciliations., • Audit Operations' paperwork for timely completion and accuracy., • Participate in Internal Quality Audit processes to improve plant quality systems and GMP compliance., • Audit and document compliance to the Master Sanitation Schedule., • Conduct titration testing, verify chemical concentrations, and verify CIP dilution samples., • Perform troubleshooting, product weight verifications, and volumetric checks., • Complete sensory analysis on finished products as required., • Conduct investigative research on products or materials as assigned., • Conduct ATP cleaning verification and line release processes per shift., • Perform Environmental Swabbing as requested by QA Management., • Set up documentation and complete sample shipments using proper methods., • Cover breaks, lunches, and other staffing needs as assigned., • Comply with legal requirements concerning dairy processing and safety, and report concerns., • Work safely and report safety concerns promptly, taking corrective actions as necessary., • Report food safety problems, initiate action, and support SQF by maintaining food safety and quality., • Ability to apply basic to complex mathematical concepts and handle job tasks involving weights and measures., • Basic statistics and statistical process control with attention to detail., • Effective communication skills in English to perform job functions., • Knowledge of the company's mission, purpose, goals, and role in achieving them., • Ability to operate quality and facility equipment as required., • Completion of all company training requirements., • Interpretation of company documents and literature, including UPC/code information., • Minimum of a GED or High School Diploma; Associate degree in chemistry, biology, food science, or ag-tech science preferred., • 6 months to 2 years of manufacturing/machine operation experience in the dairy/food industry preferred., • Employees must report to work well-groomed and dressed in business-appropriate attire, adhering to GMP dress code standards. Eligibility requirements apply to some benefits and may depend on your job classification and length of employment. Benefits are subject to change and may be subject to specific elections, plan, or program terms. If eligible, the benefits available for this temporary role may include the following: • Medical, dental & vision • Critical Illness, Accident, and Hospital • 401(k) Retirement Plan – Pre-tax and Roth post-tax contributions available • Life Insurance (Voluntary Life & AD&D for the employee and dependents) • Short and long-term disability • Health Spending Account (HSA) • Transportation benefits • Employee Assistance Program • Time Off/Leave (PTO, Vacation or Sick Leave) Workplace Type This is a fully onsite position in East Syracuse,NY. Application Deadline This position is anticipated to close on Dec 22, 2025. About Actalent Actalent is a global leader in engineering and sciences services and talent solutions. We help visionary companies advance their engineering and science initiatives through access to specialized experts who drive scale, innovation and speed to market. With a network of almost 30,000 consultants and more than 4,500 clients across the U.S., Canada, Asia and Europe, Actalent serves many of the Fortune 500. The company is an equal opportunity employer and will consider all applications without regard to race, sex, age, color, religion, national origin, veteran status, disability, sexual orientation, gender identity, genetic information or any characteristic protected by law. If you would like to request a reasonable accommodation, such as the modification or adjustment of the job application process or interviewing due to a disability, please email for other accommodation options.

Job Description Job Title: Instructional Designer Company Introduction: G&C Food Distributors is a leading re-distributor of refrigerated, frozen, and dry food. We store and deliver more than 4,000 food items to meet the needs of our customers across multiple states and countries internationally. In recent years, G&C Foods has grown to be one of the most respected redistributors in the United States, and we are rapidly expanding all areas of our organization. Location: Syracuse, NY Schedule: Monday through Friday 8a-5p Job Summary: We are seeking a creative and strategic Instructional Designer to join our team in developing impactful learning experiences across departments. In this role, you’ll create graphics, animation, video, and audio content while collaborating with subject matter experts and cross-functional teams to design and deliver engaging onboarding modules and e-learning courses that support employee growth and operational excellence. You’ll apply adult learning principles and instructional design theory to create interactive content that prepares employees for hands-on work and promotes continuous learning. You’ll manage our Learning Management System (LMS), create reports for managers on assignment completions, assess training effectiveness, and help shape career development pathways that align with organizational goals. If you're passionate about adult learning, adept at creating multimedia content, and energized by the challenge of upskilling diverse learners, we’d love to hear from you. Duties and Responsibilities: • Work directly within departments to define and document learning objectives., • Develop content to support Onboarding initiatives for Office and Operations departments., • Develop a process to curriculum map existing training by warehouse trainers to identify training development needs to support the hands-on training already in place., • Work with subject matter experts (SME’s) in all departments, to determine priorities and needs., • Work with subject matter experts to convert existing & create new instructional material that is interactive & supports adult learning principles; output includes microlearning, courses, curriculum, and Standard Operating Procedures (SOP’s)., • Create Media (video, audio, graphics and animation) using content development tools., • Design and develop e-learning/Microlearning experiences that elevate the User Experience (UX), prepare users for hands-on work, while applying sound instructional design theory., • Collaborate with the project team, including Business Analysts, Department Training Managers, and the Business Solutions team, to ensure project progression., • Understand adult learning principles & how to apply them to an ever-changing business environment., • Administer a Learning Management System to post, assign, track, and report on e-learning., • Measure and assess the effectiveness of instructional materials., • Redesign content to meet the needs of departmental learners and seek feedback on a continual basis., • Promote Upskilling/Reskilling/Continuing Education opportunities that support personal and corporate growth and retention., • Work with senior management to develop career training tracks for our employees who want to grow within the company., • Skilled in eLearning, Course creation and Video/Audio tools such as Adobe CC, Camtasia, Vyond, Articulate 360/Storyline/Rise, WellSaid Labs, etc., • Experience designing to learning industry standards (SCORM/LTI/AICC/xAPI/etc.), • Skilled in managing a Learning Management System., • Interviewing of SME’s for the purpose of developing procedural outlines to later be developed into SOP’s and course learning objectives., • Authority in adult learning theory and learning design methodologies., • Vocational or Adult teaching experience is a plus, • Minimum of a bachelor's degree in Instructional Design, Adult Education (or something similar), • 5+ years of professional experience in designing and developing learning experiences, in roles such as instructional designer, learning experience designer, learning architect, or similar At G&C, we believe exceptional people deserve exceptional rewards. When you join our team, you’re not just taking a job; you’re stepping into a career with a company that invests in your growth, values your contribution, and celebrates your success. Our Benefits Package Includes: • Competitive Health Coverage – Medical plans starting at just $24.73/week, plus comprehensive vision, dental, and a 401(k) with company match to secure your future., • Company-Paid Life Insurance – Because your peace of mind matters., • Performance-Based Bonuses – Earn up to the equivalent of five additional weeks’ pay each year based on your impact and results., • Onsite Fitness & Wellness Centers – Stay active and healthy without leaving the workplace., • Flexible Scheduling Options – Designed to support your life outside of work., • Company Culture Perks – From team cookouts and appreciation events to seasonal holiday gifts, we celebrate our people year-round., • Exclusive Employee Product Discounts – Access unbeatable prices on a wide range of products, available only to our team., • Career Advancement – Clear pathways to grow within the company, backed by leadership who invest in your success., • Open-Door Leadership – Access to decision-makers who listen, act, and value your input., • Annual Flu Clinics – Convenient, no-cost health support right at work. Contact/Application Information: If you’re interested, please apply through Indeed. If you have any questions, you can email . Thank you for your interest, and we look forward to meeting you! #ADP1

Job DescriptionOutstanding opportunity for an experienced financial and business executive for a privately held company. Staffworks is hiring for a large company who is looking for an independent self-starter to be responsible for financial oversight of our growing business. Corporate headquarters and main distribution center is in Syracuse, NY. Chief Financial Officer: • Strategically partner with the President, CEO, and executive leadership team to control costs and drive sustainable profitable growth., • Assume fiduciary responsibility for the company’s financial health while safeguarding the company’s assets., • Provide Leadership and guidance within the accounting department, • Provide clear and strong focus to the organization on gross margin improvement, operating income growth, excellence in cash flow practices, and obtainment of financial targets., • Present accurate and timely financials to the President and CEO monthly., • Ensure the successful completion of all financial audits and the fulfillment of external reporting requirements., • Implement operational best practices to create efficiencies., • Monitor cash balances and cash forecasts., • Keep President and CEO advised on major issues., • Bachelor’s degree in Accounting, Finance, or similar discipline. (MBA or CPA highly desired)., • Knowledge of how all phases of financial and cost accounting relate functionally to manufacturing operations., • Minimum of 10+ years’ experience in the Accounting/Finance leadership experience, • Demonstrated ability to use professional/technical knowledge, skills, experience, and judgment to accomplish a result., • Ability to prioritize tasks and delegate them when appropriate., • Proficient with Microsoft Office Suite or related Software., • Strong supervisory and leadership skills, • Excellent interpersonal and negotiation skills., • Excellent verbal and written communication skills.

Job Description Company Overview: We're Hiring! At Bowers CPA’s& Advisors, we believe that great business decisions are powered by understanding the numbers behind the business. Our Client Accounting and Advisory services are built to provide modern, dynamic solutions for businesses that want to thrive. As a forward-thinking team of professionals, we support clients with strategic accounting guidance and the insights they need to navigate today’s fast-paced business environment. Not your typical CPA firm. We blend accounting expertise at all levels within a corporate structure with a deep understanding of our client’s business, making Bowers the trusted partner for clients looking for an outsourced solution to their accounting needs. Our Client Accounting & Advisory team is driven by a passion for helping clients grow, streamline operations, and meet their goals through smarter, data-driven decisions. Job Summary: Client Accounting and Advisory Services (CAAS) services include full-service CFO Advisory Services, Controller, bookkeeping, vendor bill processing and payment, customer invoicing, payroll processing and tax reporting; and sales tax preparation. If you’re ready to be part of a team that’s focused on delivering practical, high-impact solutions, we’d love to talk to you. Here, you’ll collaborate with innovative thinkers, and help businesses make the most of their financial and accounting opportunities. At Bowers CPA’s & Advisors, we value creativity, entrepreneurial spirit, and a commitment to excellence. Flexibility in the workplace. Responsibilities: • Oversee and manage the responsibilities of assigned CAAS transactional staff, • Oversee timely and accurate processing of vendor invoices, • Oversee accounts receivable invoices and application of payments, • Manage payroll processing and reporting, • Prepare and file sales tax returns, • Perform accounting cleanups, • BS in Accounting or equivalent experience, • Minimum of 2 years experience in accounting, • Prior supervisory experience required, • Experience with QuickBooks, • High proficiency in Microsoft Office Suite, specifically Word, Excel, and PowerPoint, • Possess excellent communication skills, • Must have a high level of attention to detail and accuracy, • Possess strong organizational, problem-solving, and analytical skills, • Able to manage multiple priorities and workflow Benefits: We offer tremendous growth and development opportunities, flexible work schedules, and a comprehensive compensation and benefits package to include, Health, Dental, Vision, Life, Long-Term Disability, 401k, Paid Time Off, Volunteer Time Off, Work-Life Balance, and more! EOE

Job DescriptionChief Revenue Officer Company Overview: L & J. G. Stickley, Inc (Stickley) is a leader in the furniture manufacturing and retail industries, with brands that are respected and cherished worldwide. We're building something rare: a brand with a 125 year legacy, a supply chain we own, and a new D2C platform designed from the ground up. As Chief Revenue Officer, you'll lead the charge by aligning and scaling our three core channels- Retail, Wholesale, and E-Commerce- in concert. These channels must operate with clarity, discipline, and mutual reinforcement to deliver a unified brand experience and sustained growth. This newly created role is central to our next phase of growth and requires a special talent. General Description/ Purpose: You'll launch and scale a new direct-to-consumer brand from scratch. This initiative is distinct from our existing portfolio and offers full control over pricing, experience, and margin. It's a rare opportunity to build a D2C ecosystem from the ground up, supported by a vertically integrated supply chain and a digital-first mindset. You'll also partner closely with the VP of Strategic Growth Channels to maximize performance across OEM. To the Trade, and 3rd Party Marketplaces. These segments represent high-potential opportunities that require focused leadership, disciplined execution, and strategic expansion-with the CRO ensuring alignment across brand, margin, and customer experience. This newly created role unifies all revenue-driving teams and customer journey functions. The CRO will oversee four channel leaders: • Retail (Company-Owned Showrooms), • Wholesale (Authorized Dealer Network), • E-Commerce What You'll Lead: Brand Stewardship & Extension Translate our 125-year legacy into modern systems and storytelling. Extend brand equity across all channels with consistency and care. Channel Architecture & Portfolio Management Oversee a residential portfolio that performs across all relevant channels. Ensure clarity, discipline, and channel harmony. D2C Brand Development Launch and scale a new direct-to-consumer brand with full control over pricing, experience, and margin. This brand complements our broader ecosystem. Strategic Growth Channel Expansion Partner with the VP of Strategic Growth Channels to unlock new market opportunities across OEM, to-the-trade, and marketplace segments. Customer Journey Modernization Architect a seamless, modern experience across showroom, web, and post-purchase touchpoints. Ensure brand consistency and operational excellence. Margin Strategy & Operational Discipline Leverage our vertically integrated supply chain to maintain strong consolidated margins and pricing clarity across all revenue streams. Team & Partner Alignment Educate internal teams and external partners on pricing logic, brand positioning, and growth strategy. Build trust through clarity and shared success. What You Bring: • 10+ years in sales, marketing, or related field. Experience in furniture industry a strong plus., • A proven track record of revenue leadership across multi-channel environments, • Experience scaling premium brands and launching new ones, • Ability to build a D2C ecosystem from scratch, including digital infrastructure, customer acquisition, and post-purchase experience, • A digital-first mindset-fluent in modern tools, platforms, and performance metrics, • Strategic fluency in pricing, margin logic, and customer segmentation, • Ability to lead with clarity, empathy, and precision, • Comfort navigating legacy and innovation-honoring what came before while building what's next Stickley offers a competitive benefits package including: • Paid Time Off, • Group Health, prescription, vision, and dental coverage, • Company paid life insurance, • 401K, • Flexible Spending, • Employee Assistance Program, • Stickley "Fit for Life" Wellness Program, • Corporate YMCA discount, • Employee Furniture Discount Program We've built a legacy worth protecting-and a platform ready to grow. This role sets the pace for every revenue-driving team, unifying strategy, empowering leaders, and ensuring our growth is both measurable and meaningful. The compensation range provided in this job posting is a general guideline. When extending an offer, Stickley considers factors including but not limited to the role and associated responsibilities, location, and market and business considerations, as well as the candidate's work experience, key skills, and education/training. Stickley is an equal opportunity employer committed to diversity and inclusion. Job Posted by ApplicantPro

Job Description Company Overview: We're Hiring! At Bowers CPA’s& Advisors, we believe that great business decisions are powered by understanding the numbers behind the business. Our Client Accounting and Advisory services are built to provide modern, dynamic solutions for businesses that want to thrive. As a forward-thinking team of professionals, we support clients with strategic accounting guidance and the insights they need to navigate today’s fast-paced business environment. Not your typical CPA firm. We blend accounting expertise at all levels within a corporate structure with a deep understanding of our clients’ business making Bowers the trusted partner for clients looking for an outsourced solution to their accounting needs. Our Client Accounting & Advisory team is driven by a passion for helping clients grow, streamline operations, and meet their goals through smarter, data-driven decisions. Job Summary: Client Accounting and Advisory Services (CAAS) services include full-service CFO Advisory Services, bookkeeping, vendor bill processing and payment, customer invoicing, payroll processing and tax reporting, and sales tax preparation. If you’re ready to be part of a team that’s focused on delivering practical, high-impact solutions, we’d love to talk to you. Here, you’ll collaborate with innovative thinkers and help businesses make the most of their financial and accounting opportunities. At Bowers CPA’s & Advisors, we value creativity, entrepreneurial spirit, and a commitment to excellence. In this role, hands-on experience in the following areas is required: • Process accounts payable and receivable invoices and payments, • Assist with payroll processing and reporting, • Perform reconciliations of bank, credit, and loan accounts to the general ledger, • Prepare and file sales tax returns, • Associate's Degree preferred, • 2-3 years of relevant experience, • Experience with QuickBooks preferred, • Proficiency in Microsoft Office Suite, • Excellent communicator, • High level of attention to detail and accuracy, • Strong organizational and problem-solving skills, • Able to manage priorities and workflow daily Benefits: We offer tremendous growth and development opportunities, flexible work schedules, and a comprehensive compensation and benefits package which includes: Health/Dental/Vision/Life/Long-Term Disability Insurance, 401k, Paid Time Off, Volunteer Time Off, Work-Life Balance, Culture, and more! EOE

Job Description Ripsaw Operator L & J. G. Stickley, Inc. (Stickley) is a leader in the furniture manufacturing and retail industries, with brands that are respected and cherished worldwide. With over 125 years in furniture manufacturing, and more than 90 years as a furniture retailer, Stickley is the proud employer of nearly 800 talented individuals. We have three manufacturing facilities, 12 corporate-owned retail showrooms, and a global distribution network. We have an opening for a Ripsaw Operator at our Manlius, NY facility. Job Summary: The Ripsaw Operator is responsible for operating various mechanical machines which requires the operator to set up, run, and conduct basic maintenance of the assigned equipment. The Ripsaw Operator may be required to run one or more than one machine at a time and is responsible for dimensional accuracy machined product. Job Responsibilities: • Identify a variety of wood species products including but not limited to the following wood species: Cherry, Mahogany, Oak, Maple, Birch, and Veneers and make grade related decisions on a daily basis based on established standards, • Reports to their supervisor for direction daily and promptly report any questions or problems, • Read, comprehend, and full fill production tickets and print scan tags as needed., • Read and Interpret part drawings, • Inspect parts for quality and dimensional accuracy, • Perform preventive maintenance as required by preventative maintenance sheets and correctly log any and all preventive maintenance done with any corresponding machine problems and or information, • Set up work in the safest, most efficient manner per specifications and when no other jobs are noted as needed line up jobs in a manner that minimizes setup time, • Operate assigned machines and mechanical equipment/machines to produce required parts and pieces and achieve defined production goals, • Must be able to work from a routing and be able to set-up the saws to rip rough cut to specified widths, • Able to detect and remove any defects, • Able learn or be knowledgeable of the requirements for ripping random or matched grain components, • Able to learn and capable of changing saw blades and collars as required, • Able to move full scrap boxes to grinder as needed, • Inspect work to ensure dimensions and visual quality is maintainedBenefits:We offer competitive compensation and a comprehensive benefits package that includes:, • Flexible Paid Time Off & Paid Holidays, • Perfect Attendance Reward Program - earn additional paid time off, • Group Health, Dental, and Prescription Insurance, • Company-Paid Life Insurance, • 401(k) with Company Match, • Flexible Spending & Health Saving Account, • Generous employee discount, • Access to On-site Health Services, including dedicated nurse and licensed Nurse Practitioner Stickley is an equal opportunity employer committed to diversity and inclusion. Job Posted by ApplicantPro

Job Description We are LOTTE BIOLOGICS! Delivering Therapies That Enable a Healthier World. A new company, built on 80 years of tradition. We embody our core values of being Inspired by Science, Embracing Diversity, Fostering Talent, and Connecting Lives. Our mission is to be the most trusted partner in the industry, with high standards of quality and continuous innovation, to reliably deliver benefits for patients worldwide. Position Summary The Director, Facilities & Engineering provides strategic leadership and oversight of site facilities, maintenance, and engineering operations at the Syracuse site. This role is responsible for ensuring reliable, compliant, and cost-effective operation of all site infrastructure and utilities supporting manufacturing and development activities. The Director leads a high-performing team to deliver excellence in facilities services, engineering support, environmental health and safety performance, and capital project execution. This role requires a forward-thinking leader who can develop innovative and efficient solutions, foster collaboration across diverse internal and external stakeholders, and maintain alignment with LOTTE Biologics' standards, values, and business goals. The Director will be accountable for strategic planning, capital project management, and the development of operating budgets while ensuring a safe, compliant, and sustainable facility that supports business continuity and growth. Duties & Responsibilities • Provide strategic direction and leadership for the Facilities and Engineering organization, ensuring operational excellence, safety, and reliability across all site functions., • Develop and implement the site's long-term facilities and capital investment strategy, aligned with business objectives and growth plans., • Lead the development and execution of annual operating and capital budgets for maintenance, utilities, and engineering activities., • Drive high standards of Health, Safety & Environment (HSE) performance and compliance in partnership Risk Management team, fostering a proactive safety culture across all operations., • Oversee maintenance of building systems, utilities, and infrastructure to ensure continuous and compliant support of manufacturing operations., • Ensure compliance with all applicable regulatory requirements including GMP, GLP, OSHA, EPA, and local building codes., • Lead the design, planning, and execution of capital projects including facility upgrades, expansions, and new construction, ensuring adherence to timelines, budgets, and quality standards., • Develop and sustain a high-performance team culture focused on accountability, collaboration, and continuous improvement., • Foster effective relationships with internal stakeholders (Manufacturing, HSE, Quality, Finance and Supply Chain) to ensure seamless cross-functional coordination., • Partner with external vendors, contractors, and consultants, ensuring optimal service delivery, cost control, and contract performance., • Develop and manage outsourcing strategies, contracts, and vendor relationships for maintenance, utilities, and engineering services., • Implement and monitor key performance indicators (KPIs) to measure efficiency, reliability, cost control, and service quality., • Drive energy management initiatives to optimize consumption, reduce environmental impact, and ensure regulatory compliance., • Serve as the primary point of contact for site infrastructure and facilities matters with local and state authorities, ensuring timely acquisition of necessary permits and approvals., • Bachelor's degree in Engineering, Facilities Management, or a related technical field required; advanced degree preferred., • Minimum of 10–15 years of experience in facilities, engineering, or operations management within a manufacturing or pharmaceutical/biologics environment., • At least 5 years of leadership experience managing cross-functional or multi-disciplinary teams., • Demonstrated success leading capital planning, budgeting, and project execution in a regulated environment. Regulatory & Compliance Expertise • Strong knowledge of GMP/GLP, OSHA, EPA, and local regulatory standards as they apply to pharmaceutical operations., • Familiarity with health, safety and environmental programs, including compliance and performance optimization., • Proven experience in managing maintenance and engineering functions, utilities systems, and site infrastructure., • Expertise in facilities design, construction, and capital project management., • Knowledge of energy management systems, sustainability practices, and cost-saving initiatives., • Strong leadership and team development skills with a focus on accountability, performance, and collaboration., • Excellent problem-solving, decision-making, and crisis management abilities., • Proven capability to lead through change, inspire innovation, and manage competing priorities effectively., • Demonstrated ability to plan, manage, and control operating and capital budgets., • Experience negotiating contracts, managing outsourced services, and balancing cost control with service quality., • Proficiency with Computerized Maintenance Management Systems (CMMS), Building Management Systems (BMS), and other facilities automation tools., • Familiarity with digital solutions for asset management, predictive maintenance, and energy optimization., • Primarily office-based work requires prolonged periods of sitting, standing, and computer use., • Ability to move throughout the manufacturing site, warehouse, and storage areas, including walking on concrete and uneven surfaces., • Occasional climbing of stairs, ladders, or steps to access equipment, storage areas, or process locations., • Ability to reach, bend, stoop, and lift light to moderate items (up to 25 lbs) occasionally, such as boxes of materials or documents., • Ability to inspect manufacturing, warehouse, or cold storage areas, sometimes in confined spaces or temperature-controlled environments (cold rooms, freezers, cryogenic storage)., • Must be able to wear appropriate personal protective equipment (PPE) as required for site access, including lab coats, gloves, safety glasses, and safety shoes., • Primarily office-based with frequent interaction across functional teams and business units., • Regular visits to manufacturing areas, warehouses, cold storage, and other operational sites, requiring adherence to site safety protocols., • Exposure to temperature-controlled environments (cold rooms, freezers, cryogenic storage areas) and occasional noise typical of manufacturing operations., • Collaborative environment involving cross-functional meetings, supplier and customer interactions, and coordination with other sites., • Requires use of standard office equipment (computers, phones, printers) and occasional use of material handling tools or equipment during site visits. Provides leadership and strategic direction for all site Facilities and Engineering functions. Leads, coaches, and develops a high-performing team focused on operational excellence, safety, and continuous improvement. Assumes full accountability for all Facilities services, including both direct reports and matrix-managed functions, in partnership with functional process owners. Oversees long-term planning, resource allocation, and policy alignment to ensure coordination across site operations. Travel Up to 10% of travel. Work Location: East Syracuse, NY The level of the role (Director or Senior Director) will be determined based on the selected candidate's experience, qualifications, and demonstrated capabilities. Compensation will align accordingly within the range listed below. • Director: $155,000 - $214,000 (23% Target Bonus) We believe that women, people of color, veterans and LGBTQ communities must participate in the work we do, so we strongly encourage applications from people with these identities or who are members of underrepresented communities! If this is the work that you want to do, in a culture of inclusion and excellence with the goal of making our world to be a healthier place, then please apply today!

Job Description At C&S Companies, we believe work environment, culture, and the opportunity to learn, and grow are key elements when considering a new job. We are just the right size to provide the resources and support you need without the burdensome bureaucracy of a large corporate environment. To that end, we foster a family-friendly and supportive workplace; collaborative and employee-focused with an emphasis on quality, integrity, trust, fun, and accountability. Diversity, equity, inclusion, and belonging are a top priority at C&S. We promote personal and professional growth by cultivating and sustaining a safe, inclusive atmosphere where everyone feels a sense of belonging. By encouraging employees to bring their whole selves to work, we create a diverse and equitable environment where all our voices are heard. Position Overview C&S is currently seeking a Senior Project Engineer to join our Fuel Facility team. Location at a C&S office is preferred; however, a remote location is negotiable. Full-Time is Preferred; however, Part-Time is negotiable. The Senior Project Engineer is expected to have good relationships with clients and professionals in the fueling systems industry and will be responsible for generating project opportunities and managing fueling systems projects. In this role, the Senior Project Engineer will work with our multi-disciplinary design team to deliver projects in the aviation, automotive, and related fueling systems markets. Position Responsibilities • Develop effort budgets and schedules for prospective project pursuits., • Develop working relationships with existing and prospective clients and professionals., • Generate project opportunities., • Develop and optimize processes for improved efficiency, sustainability, and cost-effectiveness. Apply advanced problem-solving techniques and tools to enhance process design and operations., • Ensure all engineering projects comply with applicable codes, standards, and regulations. Maintain an up-to-date knowledge base of industry standards and government regulations., • Implement and oversee quality assurance protocols to maintain the quality of engineering outputs. Conduct reviews and audits of project deliverables to ensure technical accuracy and integrity., • Champion safety protocols and risk management practices throughout project lifecycles. Analyze potential risks and develop mitigation strategies to prevent accidents and operational failures., • Develop P&IDs for, but not limited to: Aviation Fueling Systems, Automotive Fueling Systems, Heating Oil Systems, and Emergency Generator Systems., • Communicate effectively with all stakeholders, including management, clients, regulatory bodies, and project teams, ensuring clear and consistent communication regarding project progress and issues., • Mentor less experienced engineers and support their professional development., • Utilize safe work practices in accordance with federal, state, local, and company standards., • Minimum bachelor’s degree in mechanical, environmental, or industrial engineering or other similar degree., • Minimum 10 years’ experience working on flammable and combustible liquids fueling systems projects., • Professional Engineer (PE) license preferred or willing to pursue PE license., • Understanding of flammable and combustible liquids engineering principles, methodologies, and tools., • Ability to analyze complex engineering problems and develop effective solutions., • Comprehensive knowledge of relevant industry standards, safety regulations, and environmental laws., • Ability to write sequence of operation processes with P&IDs., • Excellent verbal and written communication skills, capable of effectively articulating technical information to non-technical stakeholders and writing detailed reports., • Efficient in; Bluebeam (or other PDF reader), Microsoft Word, Microsoft Excel, and Microsoft Outlook. $120,000 - $140,000/year* *Actual compensation may vary based on related work experience, geographical location and market conditions, education/training, certifications, and other credentials, as well as applicable knowledge and skills. Learn about our comprehensive Benefits WHO WE ARE: C&S Companies is a national planning, design, and construction firm with more than 600 employees and growing. For more than 50 years we have been delivering critical infrastructure design, planning and construction services in aviation, civil/site infrastructure, construction and program management, construction/design-build, energy, environmental, facilities, architecture, planning, sustainability, and transportation. We have offices throughout New York State, California, Florida, Michigan, Arizona, Pennsylvania, Ohio, Washington, and Kentucky.

Job DescriptionDescription At C&S Companies, we believe work environment, culture, and the opportunity to learn and grow are key elements when considering a new job. We are just the right size to provide the resources and support you need without the burdensome bureaucracy of a large corporate environment. To that end, we foster a family-friendly and supportive workplace; collaborative and employee-focused with an emphasis on quality, integrity, trust, fun, and accountability. Belonging is a top priority at C&S. We promote personal and professional growth by cultivating and sustaining a safe, inclusive atmosphere where everyone feels a sense of belonging. By encouraging employees to bring their whole selves to work, we create a diverse and equitable environment where all our voices are heard. Position Overview C&S Companies is seeking an experienced Senior Project Engineer in the Buffalo, Rochester, or Syracuse, NY offices to support our growing railroad practice. You will be part of a team working on projects from conception through final design and construction. This position is diversified with opportunities to work in the office on the engineering design of railroad infrastructure and in the field with construction inspection/administration. You will work on a variety of designs and projects with the opportunity to learn and grow throughout your career at C&S. Position Responsibilities • Ability to work with internal and external staff on an individual and team basis., • Ability to motivate and mentor junior staff., • Strong written and oral communication, organizational, and interpersonal skills., • Ability to manage all aspects of smaller projects or assigned tasks as part of a larger overall project., • Work with team in Client relationship management and obtaining additional business opportunities., • Ability to challenge oneself and broaden knowledge base., • Willingness to be proactive and anticipate., • May require occasional travel away from the office, estimated 15%., • Utilize safe work practices in accordance with federal, state, local, and company standards., • B.S. in Engineering field, M.S. in related Engineering field a plus., • Registration as a Professional Engineer (P.E.)., • 10 or more years of railroad related design and construction experience., • Experience with preparation of contract documents from bidding though design and award., • Experience with AREMA Manual for Railway Engineering. Learn about our comprehensive Benefits *Actual compensation may vary based on related work experience, geographical location and market conditions, education/training, certifications, and other credentials, as well as applicable knowledge and skills. As an employee working on railroad related assignments with the need to occasionally visit railroad properties, you will be enrolled in our drug and alcohol testing program as mandated by the Federal Railroad Administration’s (FRA) 49 CFR 219 Drug and Alcohol Testing Requirements Program. A Candidate’s employment is contingent upon successful results of the test which will be covered and administered by C&S’s provider. WHO WE ARE: C&S Companies is a national planning, design, and construction firm with more than 600 employees and growing. For more than 50 years we have been delivering critical infrastructure design, planning and construction services in aviation, civil/site infrastructure, construction and program management, construction/design-build, energy, environmental, facilities, architecture, planning, sustainability, and transportation. We have offices throughout New York State, California, Florida, Michigan, Arizona, Pennsylvania, Ohio, Washington, and Kentucky. Equal Opportunity Employer/Protected Veterans/Individuals with Disabilities This employer is required to notify all applicants of their rights pursuant to federal employment laws. For further information, please review the Know Your Rights notice from the Department of Labor.

Job Description Company Overview: We're Hiring! At Bowers CPA’s & Advisors, we believe that great business decisions are powered by understanding the numbers behind the business. Our Client Accounting and Advisory services are built to provide modern, dynamic solutions for businesses that want to thrive. As a proud member of the AICPA’s G400, encompassing the Top 300 Firms nationally, we maintain a robust reputation grounded in integrity. As a forward-thinking team of professionals, we support clients with strategic accounting guidance and the insights they need to navigate today’s fast-paced business environment. Not your typical CPA firm. We blend accounting expertise at all levels within a corporate structure with a deep understanding of our clients’ business, making Bowers the trusted partner for clients looking for an outsourced solution to their accounting needs. Our Client Accounting & Advisory team is driven by a passion for helping clients grow, streamline operations, and meet their goals through smarter, data-driven decisions. Job Summary: Client Accounting and Advisory Services (CAAS) services include full-service CFO Advisory Services, controller, bookkeeping, vendor bill processing and payment, customer invoicing, payroll processing and tax reporting, and sales tax preparation. If you’re ready to be part of a team that’s focused on delivering practical, high-impact solutions, we’d love to talk to you. Here, you’ll collaborate with innovative thinkers and help businesses make the most of their financial and accounting opportunities. At Bowers CPA’s & Advisors, we value creativity, entrepreneurial spirit, and a commitment to excellence. Flexibility in the workplace. Job Summary: In this role, you will be a member of CAAS group accountable for providing Accounting Manager-level accounting services including month-end review and closing of financial records, processing payables and receivables and various other accounting operations for assigned clients. Requirements: • Oversee and manage responsibilities for assigned CAAS transaction staff, • Oversee timely, efficient processing and accurate payment of vendor invoices, • Perform monthly accounting reconciliations of bank and general ledger accounts for assigned clients, • Perform accounting system clean-ups, • Prepare month-end close for assigned clients, • B.S degree in Accounting or equivalent work experience, • Minimum 3 years of experience in accounting, • 1 year supervisory experience required, • Strong leadership skills to execute and build team success, • Experience with QuickBooks preferred, • Proficiency in Microsoft Office Suite, specifically Word, Excel, and PowerPoint, • Excellent communicator, • Have a high level of attention to detail and accuracy, • Strong organizational, problem-solving solving and analytical skills, • Able to manage priorities and workflow Benefits: We offer tremendous growth and development opportunities, flexible work schedules, and a comprehensive compensation and benefits package to include Health, Dental, Vision, Life, Long-Term Disability, 401K, Paid Time Off, Volunteer Time Off, Work-Life, Balance, Culture, and More! EOE

Job DescriptionBranch Sales Manager: Overhead Door experience / $$$ / amazing opportunity, great organization, GROWTH!! This Jobot Job is hosted by: Billy Mewton Are you a fit? Easy Apply now by clicking the "Apply Now" buttonand sending us your resume. Salary: $150,000 - $200,000 per year A bit about us: We are seeking a dynamic and motivated Branch Sales Manager to join our team in the Manufacturing industry. This is an exciting opportunity for an experienced professional who is looking to take their career to the next level. This role will involve managing a team of sales representatives, driving sales growth, and developing strategies to achieve business objectives. The Branch Sales Manager will be responsible for overseeing the sales operations within the branch, ensuring that the branch meets its sales targets, and driving profitability. This role will also be responsible for developing and maintaining relationships with key clients and stakeholders. Relocation assistance will be provided for the successful candidate. This position has incentives based on sales goals, as well as a discretionary bonus! Why join us? • REMOTE!!!, • Relocation assistance!!, • Limited travel, car allowance, phone-many incentives!!, • Competitive salary and performance-based incentives!!, • Comprehensive benefits package (health, dental, vision, 401k), • Opportunities for professional development and career advancement, • A supportive and team-oriented work environment Job Details Responsibilities: 1. Develop and implement strategic sales plans to achieve corporate objectives for products and services., 2. Direct sales forecasting activities and set performance goals accordingly., 3. Direct staffing, training, and performance evaluations to develop and control sales and service programs., 4. Meet with key clients, maintaining relationships, and negotiating and closing deals., 5. Analyze and control expenditures of the branch to conform to budgetary requirements., 6. Review market analyses to determine customer needs, volume potential, price schedules, and discount rates., 7. Monitor and evaluate the activities and products of the competition., 8. Direct product research and development., 9. Oversee the sales team to ensure the branch's sales targets are met., 10. Develop and maintain relationships with key clients and stakeholders. Qualifications: 1. Bachelor's degree in Business Administration, Sales, Marketing, or a related field., 2. A minimum of 5 years of experience in a sales management role, preferably in the Manufacturing industry., 3. Proven experience in dock and door sales, regional sales, or a similar field., 4. Demonstrated ability to lead and manage a successful sales team., 5. Strong understanding of customer and market dynamics and requirements., 6. Proven ability to achieve sales targets., 7. Excellent negotiation and closing skills., 8. Strong communication and interpersonal skills., 9. Ability to travel as needed., 10. Proficiency in using Microsoft Office Suite applications and contact management software. This is an exciting opportunity to join a growing company and lead a dynamic sales team. If you are a motivated, results-driven professional with a proven track record in sales management, we would love to hear from you. Apply today to be considered for this exciting opportunity. Interested in hearing more? Easy Apply now by clicking the "Apply Now" button. Jobot is an Equal Opportunity Employer. We provide an inclusive work environment that celebrates diversity and all qualified candidates receive consideration for employment without regard to race, color, sex, sexual orientation, gender identity, religion, national origin, age (40 and over), disability, military status, genetic information or any other basis protected by applicable federal, state, or local laws. Jobot also prohibits harassment of applicants or employees based on any of these protected categories. It is Jobot’s policy to comply with all applicable federal, state and local laws respecting consideration of unemployment status in making hiring decisions. Sometimes Jobot is required to perform background checks with your authorization. Jobot will consider qualified candidates with criminal histories in a manner consistent with any applicable federal, state, or local law regarding criminal backgrounds, including but not limited to the Los Angeles Fair Chance Initiative for Hiring and the San Francisco Fair Chance Ordinance. Information collected and processed as part of your Jobot candidate profile, and any job applications, resumes, or other information you choose to submit is subject to Jobot's Privacy Policy, as well as the Jobot California Worker Privacy Notice and Jobot Notice Regarding Automated Employment Decision Tools which are available at jobot.com/legal. By applying for this job, you agree to receive calls, AI-generated calls, text messages, or emails from Jobot, and/or its agents and contracted partners. Frequency varies for text messages. Message and data rates may apply. Carriers are not liable for delayed or undelivered messages. You can reply STOP to cancel and HELP for help. You can access our privacy policy here: jobot.com/privacy-policyCompany DescriptionJobot is on a mission to connect good people with good jobs. By combining AI-powered technology with the expertise of Jobot Pros, our experienced recruiters, we help you find career opportunities that align with your goals and values. Founded in 2018 and employee-owned since 2024, Jobot is committed to fostering a culture of kindness, respect, innovation, and connection. As an industry leader, we’ve been recognized as a top workplace by Forbes, Fortune, USA Today, and Staffing Industry Analysts (SIA). Ready to find a good job? Create your profile today at Jobot.com.Jobot is on a mission to connect good people with good jobs. By combining AI-powered technology with the expertise of Jobot Pros, our experienced recruiters, we help you find career opportunities that align with your goals and values.\r\n\r\nFounded in 2018 and employee-owned since 2024, Jobot is committed to fostering a culture of kindness, respect, innovation, and connection. As an industry leader, we’ve been recognized as a top workplace by Forbes, Fortune, USA Today, and Staffing Industry Analysts (SIA).\r\n\r\nReady to find a good job? Create your profile today at Jobot.com.

Job DescriptionCompany Overview: L& J.G. Stickley, Inc. is a heritage brand with over 125 years of American craftsmanship, a vertically integrated supply chain, and a rapidly expanding digital presence. As we accelerate our direct-to-consumer (D2C) strategy, we're seeking a Director of Ecommerce to lead the transformation of our digital business into a high-performing, scalable revenue engine. Role Summary: We're looking for a strategic builder with strong commercial instincts and technical fluency. The Director of Ecommerce will own and execute a digital strategy that drives product sales, customer acquisition, and brand engagement. This role is rooted in business development-translating strategy into measurable growth through campaign leadership, CRM implementation, and customer journey optimization. You'll work cross-functionally to align digital initiatives with merchandising and operations, ensuring a seamless and profitable customer experience. What You'll Lead: Digital Business Development • Identify and activate new revenue streams across D2C, marketplaces, and digital partnerships., • Design frictionless experiences across web and post-purchase touchpoints., • Own and optimize KPIs for eCommerce growth: sales, margin, CAC, LTV, conversion rates., • Partner with merchandising, creative, and operations to align product strategy and inventory., • Champion digital best practices across internal teams.What You Bring:, • 7+ years in eCommerce, digital marketing, or business development., • Proven success scaling D2C brands or digital-first businesses., • Hands-on experience managing and growing Shopify-based eCommerce operations., • Familiarity with Shopify apps, analytics, and integrations., • Experience with CRM platforms (HubSpot, Salesforce, etc.)., • Strong analytical, strategic, and execution skills., • Experience in furniture or premium consumer goods is a plus., • Entrepreneurial mindset with a bias for action and results.Who You Are:, • A builder who thrives on clarity, accountability, and execution., • A digital strategist who knows how to scale revenue., • A collaborative leader who drives results through influence., • A customer-obsessed operator who designs journeys that convert. Benefits: • Paid Time Off, • Group Health, Prescription, Vision, and Dental Coverage, • Company-Paid Life Insurance, • 401(k) Retirement Plan, • Wellness Program, • Corporate YMCA Discount, • Employee Furniture Discount Program The compensation range provided in this job posting is a general guideline. When extending an offer, Stickley considers factors including but not limited to the role and associated responsibilities, location, and market and business considerations, as well as the candidate's work experience, key skills, and education/training. Stickley is an equal opportunity employer committed to diversity and inclusion Job Posted by ApplicantPro