Electrical design engineer jobs in Hoboken, New Jersey - Page 4Create job alerts

Responsibilities Responsibilities - • The successful candidate is considered an emerging authority, who applies extensive technical expertise, develops technical solutions to complex problems and exercises considerable latitude in determining objectives and approaches to assignment., • As such, you will be part of a team of ASIC design engineers to create a design document that defines the chip's features, performance, and internal components., • You will finish developing, enhancing, and debugging the VHDL/Verifog for the chip., • This includes verifying the functionality of the design on an HDL simulator (such as ModelSim or Xcelium) and synthesis with Synopsys or Genus., • You will perform clock domain crossing (CDC) & reset domain crossing (RDC) verification, Design for Test (DFT) and add specific related logic (i.e. memory BIST and JTAG scan chains) to the design., • You will develop and port the RTL to an FPGA prototyping board., • You will perform place and route of the netlist prior to tapeout, this includes clock tree synthesis (CTS)., • You will also run static timing analysis and power analysis after the CTS and place and route., • Packaging and an evaluation board for the physical chip must also be performed., • Bachelor degree in Hardware or Electrical Engineering (EE) with 8-10 years of experience, Masters degree in Hardware or Electrical Engineering (EE) with 6-8 years of experience or a PhD in Hardware or Electrical Engineering (EE) with 3-5 years of experience., • Must be able to obtain and maintain a Secret clearance, • Minimum 3 years experience with targeting VHDL designs to Xilinx FPGA's, • Minimum 3 years experience using Cadence Virtuoso, • Minimum 5 years experience developing in VHDL and Verilog (or system Verilog) This is the projected compensation range for this position. There are differentiating factors that can impact a final salary/hourly rate, including, but not limited to, Contract Wage Determination, relevant work experience, skills and competencies that align to the specified role, geographic location (For Remote Opportunities), education and certifications as well as Federal Government Contract Labor categories. In addition, Arcfield invests in its employees beyond just compensation. Arcfield ’s benefits offerings include, dependent upon position, Health Insurance, Life Insurance, Paid Time Off, Holiday Pay, Short Term and Long-Term Disability, Retirement and Savings, Learning and Development opportunities, wellness programs as well as other optional benefit elections. Min: $101,326.82 Max: $243,486.84 EEO Statement We are an equal opportunity employer and federal government contractor. We do not discriminate against any employee or applicant for employment as protected by law.

Job Description T&M Associates is seeking a Senior Staff Designer / Engineer with 4+ years of experience to join one of our New Jersey Offices. This position will be in the MEP Practice with a primary focus on plumbing and fire protection engineering. Qualifications: • Design of plumbing and fire protection systems for buildings. This may include domestic hot and cold water, sanitary and vent, storm drainage, natural and medical gas, compressed air, sprinkler, fire pump, and clean agent fire suppression systems., • Preparation of construction documents including calculations, drawings, details, and specifications., • Construction administration services such as site visits, construction meetings, review of submittals, and responding to RFI’s., • B.S. in Mechanical Engineering or a related field required., • EIT Certification or PE License is preferred, not required., • 4+ years prior experience in designing plumbing and fire protection systems., • Experience with and knowledge of Microsoft Word, Excel, AutoCAD and Revit required., • Ability to interact with all levels of employees, especially Mechanical, Electrical and Structural Engineers., • Willing to learn new interesting technical fields., • Excellent written and verbal communication skills., • Ability to work on several projects at once. T&M Associates offers a competitive and comprehensive benefits package designed to support the health, well-being, and professional growth of our employees. Benefits include comprehensive insurance (medical, dental and vision), a 401(k) with company match, paid time off, flexible work schedules, wellness programs, and professional development opportunities — all within a people-first, award-winning hybrid work environment. See more details about benefits here. If this sounds like a company you want to be part of then apply now! New Hires must have documents indicating they are eligible to work in the United States. EEO/AA Employer. #LI-HYBRID

Job Description T&M Associates is seeking a highly motivated Group Manager to lead our Mechanical, Electrical, and Plumbing (MEP) team in New Jersey. This position can support from any of our NJ offices and offers a hybrid work arrangement, combining remote work with in-office collaboration The Group Manager will play a key leadership role in managing team operations, ensuring project excellence, and supporting strategic business growth. With support from our local disciplines and a well-established MEP Practice in other regions, this individual will be instrumental in strengthening client relationships and driving new opportunities across both public and private sectors. Key Responsibilities: • Lead, mentor, and manage a team of mechanical, electrical, plumbing, and fire protection engineers., • Oversee day-to-day team operations to ensure high-quality, timely project delivery., • Supervise design and construction administration tasks across disciplines., • Serve as the primary liaison between clients and internal project teams., • Participate in strategic business planning and assist with project selection., • Drive continuous improvement in technical execution and team processes., • Ensure all work complies with applicable codes, standards, and industry best practices., • Monitor group performance against departmental KPIs and support overall business goals., • Foster and maintain client relationships to support ongoing and future business., • Identify and pursue new business development and acquisition opportunities., • Bachelor’s Degree in Mechanical Engineering or a related field is required., • 10+ years of experience in mechanical engineering, including MEP/facilities design., • Professional Engineer (P.E.) license preferred, • Proven project management and team leadership experience., • Strong understanding of industry codes, standards, and compliance., • Proficient in AutoCAD and Revit; hands-on design experience preferred. T&M Associates offers a competitive and comprehensive benefits package designed to support the health, well-being, and professional growth of our employees. Benefits include comprehensive insurance (medical, dental and vision), a 401(k) with company match, paid time off, flexible work schedules, wellness programs, and professional development opportunities — all within a people-first, award-winning hybrid work environment. See more details about benefits here. If this sounds like a company you want to be part of then apply now! New Hires must have documents indicating they are eligible to work in the United States. EEO/AA Employer. For California based applicants, our CCPA-CRPA Privacy Notice can be found on our Careers page at #LI-HYBRID

Job Description Senior Structural Engineer We are seeking a Senior Structural Engineer with strong experience in temporary structures, including scaffolding systems, shoring, bracing, and construction support design. This role involves working closely with contractors, project managers, and field teams to develop safe, efficient, and code-compliant solutions for complex construction projects. Responsibilities • Design and analysis of temporary structures including scaffolding, shoring, formwork, and excavation support systems, • Perform structural calculations and prepare detailed drawings and specifications, • Review contractor submittals and provide engineering support during construction, • Conduct site visits to assess conditions and ensure compliance with design intent, • Collaborate with multidisciplinary teams to support project delivery, • Bachelor’s degree in Civil or Structural Engineering, • Professional Engineer (PE) license required, • 8+ years of structural engineering experience with a focus on temporary structures or construction engineering, • Strong knowledge of OSHA regulations and relevant building codes, • Proficiency with structural analysis and design software To apply, submit resume to Joseph P. Durkin Liberty Personnel Services, Inc. 1001 Conshohocken State Rd, Ste 2-410 West Conshohocken, PA 19428 Direct Line: #midsenior #CivilMEP #li-hybrid Company DescriptionLibertyjobs.com has become an essential destination site for experienced job seekers. Our recruiters are continually posting active job openings to the website. Feel free to search our database of open positions and apply for your next career move! Hundreds of new jobs are listed on the site every month in a wide range of industries and locations. Last year we had over 900,000 unique job seekers visit our website, which means over 75,000 skilled job seekers search our openings every month. Established in 2003, Liberty Personnel quickly grew into one of the largest technical recruiting agencies on the East Coast. Today, Liberty Personnel has a national presence and a diverse client base. Listed below are a number of the industries and openings we work on: Information Technology, Software Programmers, Engineering, Manufacturing, Legal, Plant Maintenance, Construction, Oil and Gas, Medical Communications, Accounting, Finance, Electronics, Scientific, Medical Device, Sales, Pharmaceutical, Admin, Automation, Controls, Civil, HVAC, Wastewater, Structural, Electrical, Chemists, Validations, Logistics, Food Production, Renewable Energy and Machinists.Libertyjobs.com has become an essential destination site for experienced job seekers. Our recruiters are continually posting active job openings to the website. Feel free to search our database of open positions and apply for your next career move!\n\nHundreds of new jobs are listed on the site every month in a wide range of industries and locations. Last year we had over 900,000 unique job seekers visit our website, which means over 75,000 skilled job seekers search our openings every month.\n\nEstablished in 2003, Liberty Personnel quickly grew into one of the largest technical recruiting agencies on the East Coast. Today, Liberty Personnel has a national presence and a diverse client base. Listed below are a number of the industries and openings we work on:\n\nInformation Technology, Software Programmers, Engineering, Manufacturing, Legal, Plant Maintenance, Construction, Oil and Gas, Medical Communications, Accounting, Finance, Electronics, Scientific, Medical Device, Sales, Pharmaceutical, Admin, Automation, Controls, Civil, HVAC, Wastewater, Structural, Electrical, Chemists, Validations, Logistics, Food Production, Renewable Energy and Machinists.

Job Description Bosch Building Technologies LLC seeks Software Engineer II (Multiple Positions) at its facility located at 300 Broadacres Dr, Bloomfield, New Jersey 07003. Provide controls database, graphics, programming, etc. for contract sequences as provided by the Design Specialist, project specifications, or other applicable sources (10%). Develop the software necessary for a comprehensive integrated building automation system or energy management system (10%). Integrate with other 3rd party systems into building management systems using protocols like MQTT and RESTful API (10%). Work with multiple proprietary systems to make them talk on a unified platform using specialized software and specialized code (10%). Work with other building equipment suppliers to resolve issues as they arise (5%). Develop project reports to measure building analytics and provide energy savings recommendations (3%). Support installation and startup personnel with adjustments to software as required (3%). Support field teams with system data communication trouble shooting using protocol analyzers like WireShark® and Visual BACnet® (3%). As required, attend project coordination meetings and provide technical support (2%). Provide site specific customer training on projects (2%). Provide information and support for other contractors on project site (2%). Debug mechanical and installation issues that can come up when executing the static and dynamic start up and commissioning of building controls (5%). Develop branch standards for building management system software and client graphic user interface systemS (10%). Develop enhancements to existing office standards to increase functionality and efficiency (5%). Provide new product support and training to employee personnel (3%). Provide service support on existing systems ensuring proper and efficient operation as well as providing ongoing support to the facility’s building engineers (3%). Work with the internal project design engineers and outside engineer consultant firms to resolve project design issues and suggest project enhancements (3%). Participate in the transition between Operations Team and Service Team (1%). Support the sales team during project bid and estimating process, including potential customer system demonstrations (2%). Mentor and train junior software engineers on products, software and processes (5%). Complete all office safety requirements and demonstrate safe practices while working in the office or on-site (1%). Complete time sheets, service work orders, and other paperwork required for this position in an accurate and timely manner (2%). REQS: This position requires a bachelor’s degree, or foreign equivalent in Mechanical Engineering, Electronic Engineering, Electrical Engineering, Mechatronic Engineering, HVAC Controls or a related field. Plus 5 years of experience as a System Specialist, System Engineer, or occupation involving HVAC Controls engineering. Additionally, the applicant must have employment experience with: (1) Building systems including HVAC, plumbing, mechanical and electrical systems; (2) HVAC systems control strategies; (3) BMS systems software programming; (4) Networking system switch design and programming; (5) Electronic test equipment (volt meters, amp meters, or oscilloscopes); and (6) BACnet and Modbus protocols. Telecommuting: No Telecommuting Allowed. Applicants who are interested in this position should apply to Careers | Bosch Building Technologies | Building Technologies, search (Software Engineer II 9036780)

Job Description Job Title: Transmission Line Engineer III Company: TOR Engineering Location: Phoenix, AZ Position Type: Full-Time (In-Office) Job Summary TOR Engineering is seeking a skilled and motivated Transmission Line Engineer III to support the design and project management of transmission and distribution (T&D) line projects for utility and commercial clients. Projects range from 4.2 kV to 500 kV and include structural analysis, conductor selection, and modeling using PLS-CADD. This role is ideal for an experienced engineer who is detail-oriented, customer-focused, and capable of leading projects while collaborating with internal teams. As part of a smaller, agile organization, you’ll have the opportunity to build direct relationships with clients and play a key role in project success. Note: This is a full-time, in-office position based in Phoenix, AZ. Field visits will be required, and company vehicles will be provided. Key Responsibilities • Develop engineering deliverables including:, • Plan & Profiles, • Primary & Conduit Diagrams, • Transmission Section Maps, • Structure & Framing Details, • Permitting Exhibits, • PLS-CADD models for overhead transmission lines, • Coordinate with sub-consultants across civil, structural, and related disciplines, • Prepare detailed Bills of Material, • Establish loading and clearance criteria, • Develop and review technical specifications for equipment and construction, • Review and approve contractor submittals and RFIs, • Perform QA/QC on engineering designs, • Conduct site visits to verify field conditions and compare with design documents, • Support proposal development, project scoping, scheduling, and budgeting, • Ensure designs meet National Electric Safety Code (NESC) and client standards, • Perform system analyses (lightning performance, circuit ratings, corona, losses, etc.), • Lead client communications, design reviews, and project updates, • Forecast and refine project cost estimates and cash flows, • Support business development and client relationship growth, • Bachelor of Science in Engineering (Electrical, Structural, or Mechanical) from an accredited university, • Minimum 4 years of experience in transmission and distribution (T&D) design, • Engineering in Training (E.I.T.) certification required, • Proficiency in PLS-CADD (required), • Working knowledge of CAD software, • Strong understanding of engineering design principles and project workflows, • Excellent verbal and written communication skills, • Ability to lead projects and collaborate effectively with cross-functional teams, • Flexible and adaptable to changing project requirements and client needs, • Self-motivated with strong problem-solving abilities, • Ability to manage multiple priorities and deadlines, • Experience mentoring or leading junior staff, • Competitive Medical, Dental, and Vision Insurance, • Complimentary Life Insurance, • Paid Time Off (PTO) starting from date of hire, • 401(k) with company match and profit-sharing TOR Engineering offers a collaborative and flexible work environment where your contributions directly impact project success. Our smaller team structure allows for faster decision-making, stronger client relationships, and meaningful career growth opportunities within the electric utility industry. Company DescriptionTOR Engineering Corporation, founded by the late Thomas O. Radnoti (TOR) in 1985, has been a trusted provider of electrical engineering services to utilities throughout the Southwestern United States and beyond. Based in Phoenix, Arizona, our legacy is built on a foundation of pride, professionalism, and a commitment to excellence. TOR specializes in Electrical Substation, Transmission, and Distribution Design ranging from service voltage up to 500kV. We handle everything from Substation additions and rebuilds to new Substation designs, comprehensive Transmission line projects, and extensive Distribution design work. In our new era of growth and innovation, we are continually improving our practices to better serve our clients. Our team of dedicated professionals is the driving force behind our success, fostering a collaborative environment where expertise and creativity thrive. At TOR Engineering, we are passionate about pushing the boundaries of what is possible in electrical engineering. We invite you to partner with us and be a part of our journey towards a brighter, more efficient future.TOR Engineering Corporation, founded by the late Thomas O. Radnoti (TOR) in 1985, has been a trusted provider of electrical engineering services to utilities throughout the Southwestern United States and beyond. Based in Phoenix, Arizona, our legacy is built on a foundation of pride, professionalism, and a commitment to excellence.\r\nTOR specializes in Electrical Substation, Transmission, and Distribution Design ranging from service voltage up to 500kV. We handle everything from Substation additions and rebuilds to new Substation designs, comprehensive Transmission line projects, and extensive Distribution design work.\r\nIn our new era of growth and innovation, we are continually improving our practices to better serve our clients. Our team of dedicated professionals is the driving force behind our success, fostering a collaborative environment where expertise and creativity thrive.\r\nAt TOR Engineering, we are passionate about pushing the boundaries of what is possible in electrical engineering. We invite you to partner with us and be a part of our journey towards a brighter, more efficient future.

Job DescriptionCoreWeave is The Essential Cloud for AI™. Built for pioneers by pioneers, CoreWeave delivers a platform of technology, tools, and teams that enables innovators to build and scale AI with confidence. Trusted by leading AI labs, startups, and global enterprises, CoreWeave combines superior infrastructure performance with deep technical expertise to accelerate breakthroughs and turn compute into capability. Founded in 2017, CoreWeave became a publicly traded company (Nasdaq: CRWV) in March 2025. Learn more at You'll Do As a Firmware Engineer, you'll focus on AMI SPX-based BMC firmware development for GB200 server platforms. You'll collaborate with cross-functional teams to develop, enhance, and optimize embedded firmware modules that power CoreWeave's large-scale data center deployments. Key Responsibilities • Develop & Maintain: Contribute to the design, implementation, and testing of BMC firmware in AMI SPX environments using C., • Integrate: Work cross-functionally with hardware, software, and QA teams to ensure seamless firmware-hardware integration., • Debug & Optimize: Perform issue triage, root-cause analysis, and implement bug fixes and performance improvements., • Testing & Validation: Conduct firmware validation across multiple hardware revisions and test environments., • Document: Produce clear and maintainable documentation for code, configurations, and testing procedures., • 2+ years of Hands-on experience with AMI MegaRAC/SPX firmware., • 2+ years of professional experience in embedded systems or firmware development with a Bachelor's degree in Computer Engineering, Electrical Engineering, Computer Science, or related field., • Proficiency in C and embedded development workflows., • Familiarity with Linux, Git, and debugging tools (GDB, JTAG, or equivalent)., • Understanding of hardware interfaces (I2C, SPI, UART) and firmware build systems., • Awareness of BMC architectures, DMTF Redfish, and IPMI standards., • Strong debugging and analytical skills with an attention to detail., • Exposure to GB200 or other NVIDIA Grace Hopper server platforms., • Experience scripting in Python or Bash for testing or automation., • Familiarity with Jenkins or similar CI/CD environments. What We Offer The range we've posted represents the typical compensation range for this role. To determine actual compensation, we review the market rate for each candidate which can include a variety of factors. These include qualifications, experience, interview performance, and location. In addition to a competitive salary, we offer a variety of benefits to support your needs, including: • Medical, dental, and vision insurance - 100% paid for by CoreWeave, • Company-paid Life Insurance, • Voluntary supplemental life insurance, • Short and long-term disability insurance, • Flexible Spending Account, • Health Savings Account, • Tuition Reimbursement, • Ability to Participate in Employee Stock Purchase Program (ESPP), • Mental Wellness Benefits through Spring Health, • Family-Forming support provided by Carrot, • Paid Parental Leave, • Flexible, full-service childcare support with Kinside, • 401(k) with a generous employer match, • Flexible PTO, • Catered lunch each day in our office and data center locations, • A casual work environment While we prioritize a hybrid work environment, remote work may be considered for candidates located more than 30 miles from an office, based on role requirements for specialized skill sets. New hires will be invited to attend onboarding at one of our hubs within their first month. Teams also gather quarterly to support collaboration. California Consumer Privacy Act - California applicants only CoreWeave is an equal opportunity employer, committed to fostering an inclusive and supportive workplace. All qualified applicants and candidates will receive consideration for employment without regard to race, color, religion, sex, disability, age, sexual orientation, gender identity, national origin, veteran status, or genetic information. As part of this commitment and consistent with the Americans with Disabilities Act (ADA), CoreWeave will ensure that qualified applicants and candidates with disabilities are provided reasonable accommodations for the hiring process, unless such accommodation would cause an undue hardship. If reasonable accommodation is needed, please contact: . Export Control Compliance This position requires access to export controlled information. To conform to U.S. Government export regulations applicable to that information, applicant must either be (A) a U.S. person, defined as a (i) U.S. citizen or national, (ii) U.S. lawful permanent resident (green card holder), (iii) refugee under 8 U.S.C. § 1157, or (iv) asylee under 8 U.S.C. § 1158, (B) eligible to access the export controlled information without a required export authorization, or (C) eligible and reasonably likely to obtain the required export authorization from the applicable U.S. government agency. CoreWeave may, for legitimate business reasons, decline to pursue any export licensing process.

Job DescriptionMilhouse Engineering & Construction is seeking an accomplished and visionary leader to join our team as Vice President, Aviation. In this pivotal role, the Vice President of Aviation provides technical leadership while planning, organizing, and implementing the development of all projects and initiatives within the aviation group. This leader will bring strategic vision, technical expertise, and exceptional leadership skills to drive the success of their team’s projects and ensure Milhouse consistently meets and exceeds customer expectations. The Vice President, Aviation spearheads the growth and profit goals of the aviation team by leading a multidisciplinary group specializing in the planning, design, and construction services of diverse engineering projects. This is an exciting opportunity to guide a team of talented engineers while shaping the future of aviation infrastructure with one of the industry’s most innovative and culture-focused firms.What you will do: • Develop and implement strategic plans for the Aviation division, aligning with the company's overall mission and vision, • Grow business volume with existing and new clients, • Oversee the planning, design, and execution of Aviation projects, ensuring they meet quality standards, budgets, and timelines., • Administrative responsibilities include but are not limited to oversight of quality for all work, maintaining a 15% overall profitability for the Group, ensuring that the Project Management Plan is being followed, recovery plan reviews for projects over budget and schedule, invoicing oversight, staffing requirement reviews and goals and performance reviews of direct report subordinates, • Collaborate across the organization to ensure that team utilization goals are met or exceeded, • Cultivate and maintain strong relationships with clients, stakeholders, and regulatory agencies, particularly FAA, • Lead, mentor, and develop a team of multi-disciplined engineers and project managers, fostering a culture of excellence and continuous improvement, • Identify and pursue new business opportunities in the Aviation Industry including major carrier airlines, airside and landside design and Construction Management, including proposal development and presentations, • Cultivate effective relationships with clients, and team members, • Support proposal opportunities that are strategically aligned with your group, • Participates in the RFP/RFQ process including, site visits, client meetings, scope development, preparation of project approach, technical execution plans, schedules, and interviews, • Ensure all projects comply with federal, state, and local regulations, as well as industry standards and best practicesWho you are:, • Bachelor’s degree in Civil, Electrical or Mechanical Engineering or a related field, • Professional Engineer (PE) license in Illinois required, • Minimum of 15 years of experience in design engineering, with at least 5 years in a leadership role, • Minimum of 5 years of experience in the aviation industry, • Proven ability to lead and develop high-performing teams, • Excellent verbal and written communication skills, with the ability to effectively interact with clients, stakeholders, and team members, • Strong understanding of aviation engineering principles, project management, and regulatory requirementsAt Milhouse, we’re more than just a place to work — we’re a place to grow, thrive, and be celebrated. Here’s how we invest in you:, • Medical, Dental & Vision Coverage – Reach out to learn how your deductible could be covered 100% through Garner Health!, • Company Sponsored Life Insurance and Short-Term Disability – We’ve got your back when life takes unexpected turns., • Voluntary Coverages – Take control of your well-being with added coverage options., • Discounted Gym Membership – Stay active with wellness options that support your fitness goals., • Competitive Base Salary – Earn what you're worth in a performance-driven culture., • 401(k) Retirement Plan – Build your future with confidence., • Professional Development Incentives – Get rewarded for growing your skills — including bonuses for earning your P.E. License., • Milhouse University (Cross-Functional Training) – Expand your expertise with internal training built to elevate your career and receive PDH credits for applicable training towards professional engineering licenses, etc., • Employee Education & Development Program – Tuition assistance and learning opportunities to keep you moving forward., • Generous PTO + Paid Holidays – Rest, recharge, and enjoy the moments that matter most., • Paid Parental Leave – Bond with your new arrival — and yes, we’ll even cover a year of diapers!, • Extracurricular Sports Teams – Join our summer Volleyball and Softball squads for fun off the clock., • Employee Recognition Program – Be celebrated for the impact you make., • Employee Referral Bonus – Bring great people on board and get paid for it., • Transit Benefits Program – Save on your daily commute.

Job Description Position Description A client of AlphaStaffHCM is seeking a motivated and enthusiastic Mechanical Engineer to join our dynamic engineering team. As a Mechanical Engineer, you will play a key role in the design, development, and testing of hardware components for our innovative projects. This position drives the mechanical design of server chassis for quantum photonic systems, the structural platforms that house, support, and stabilize quantum computing hardware ensuring precise integration of electronics, power distribution, cabling, cooling and optical components. This position offers a unique opportunity to be at the forefront of quantum technology, contributing to the advancement of groundbreaking solutions in the rapidly evolving field of quantum computing. If you are passionate about changing the world by empowering revolutionary new quantum technologies, we want to hear from you! Duties and Responsibilities • Closely work with engineering teams to review the product specification and design of chassis mechanical, thermal, system architecture to enable competitive, high quality server chassis products, • Support the development of several platforms based around classical and quantum photonics as a mechanical engineer., • Drive designs from concept to mass production, focusing on functionality, reliability, manufacturability and cosmetic requirements., • Create and publish detailed 3D CAD and 2D drawings for designs including GD&T, material selection and manufacturing methods., • Collaborate with external vendors and manufacturers to support product development, prototyping, and production readiness, • Cross-functional work with internal teams such as hardware, photonics, operations, and product managers to deliver products that meet performance, cost, and schedule requirements., • Participate in the prototyping and assembly of products and proof-of-concept models. Soldering work will be present., • Work closely with senior engineers to implement design changes and enhancements., • Maintain accurate documentation of design changes, test procedures, and project progress., • Prepare reports and presentations for detailed design reviews. Required Skills and Experience • Bachelor of Science (BS) or Master of Science (MS) in Mechanical Engineering, Product Design or related field from an accredited university., • Minimum 3-4 years of full-time experience in the design and correlation of mechanical components including: plastic or metal parts, mechanical assemblies, printed circuit boards or flexes., • Product development and management experience in server chassis mechanical, thermal, and system design, • Experience with server system architecture and server chassis layout optimization, • Experience in developing server product architectures and carrying through to production., • General technical knowledge in multiple manufacturing methods used in consumer products such as 3D printing, urethane casting, injection molding, sheet metal, CNC machining etc., • System integration experience, including electro-opto mechanical components (Optics, lens, Motors, Mirrors, translation stages etc.), heat transfer and product architecture, • Experience with using CAD tools such as Solidworks, NX or Creo, and PDM tools such as Solidworks PDM, Windchill (Solidworks and SolidworksPDM experience is preferred), • Familiar with product development cycles, • Experience working with manufacturing vendors and suppliers, • Ability to work in a startup environment., • Technical knowledge in general materials., • Able to lift weights up to OSHA limit (50 lbs.) when required (occasionally)., • Excellent problem-solving and analytical skills., • Excellent written and verbal communication skills., • Detail-oriented. Preferred Skills and Experience • Prior work on server chassis design or data center server hardware is highly valued, as it demonstrates familiarity with the unique challenges of complex system integration of optical, electrical, and mechanical components., • Experience with designing airflow paths, heat sinks, fans, or liquid cooling loops that keep cutting-edge systems within safe temperatures., • Strong understanding of compliance-driven design requirements, including EMI and ESD. Disclaimers: AlphaStaff, Inc. and the Client are equal employment opportunity employers and do not discriminate against any applicant or employee based on race, color, sex, sexual orientation, gender identity, religion, national origin, age, past or present military service, disability, genetic information, or any other basis protected by applicable federal, state, or local laws.

Job Description Position: Field Sales Engineer Location: Secaucus, NJ Amphenol High Speed and Commercial Products Groups are the market leaders for high speed, high bandwidth electrical connectors for the Telecom/Datacom and Diverse market (Mobile Networks, Storage, Servers, Routers, Switches, etc.). Our products help to enable the electronics revolution and remain a key enabler for all the major Tier 1 OEMs globally. Our global headquarters are located in Nashua, NH and we have design, sales, and manufacturing locations globally. We are currently seeking Field Sales Engineers to join our Enterprise and Data CenterSales teams in Secaucus, NJ. RESPONSIBILITIES: Our customer's ultimate success depends on our ability to solve cutting edge problems in relation to high bandwidth signal transmission. We value our relationships with these companies, and we depend on our Sales and Field Applications Engineering Teams to foster this ongoing partnership. As a Sales Engineer you interface with our external customers and internal product development, product marketing, and application teams.Sell and promote all Amphenol products within an assigned territory and defined accounts, either through WSP/OEMcustomersand/or distributors, via successful design win (AVL) activities and total channel management. Help devise strategies to differentiate our products and solutions from our competitors. Broaden customer base and increase penetration at existing accounts, including key global accounts. The role of Sales Engineer gives an excellent insight into the Sales, Marketing, Technical, and Product Development functions of the organization. • Provide sales leadership, and work closely with Field Applications Engineer and Business Units, • Promote and sell Amphenol products with established customers and developing new prospects., • Identify all interconnect opportunities/applications of Amphenol products for clients and work with the customers engineering team to design in new products, • Develop and implement sales plan and growth strategy for territory and customers, • Meet and exceed strategic objectives and established sales quota via new design wins and management of the entire sales channel, • Motivate existing and potential customers to increase product content on the design, • Support technical aspects of the sales cycle including marketing support for the development and implementation of Amphenol products, • Provide customer service to solve complex interconnect problems and technical inquiries, • Track orders and revenue by customer, • Build rapport and provide customer support by supplying information related to samples, delivery dates, part drawings and specifications, quality issues, credit issues, etc., • Develop a thorough understanding of the market and competition in your territory., • Keep informed of new products and other general information of interest to customers., • Bachelor's in Electrical or Mechanical Engineering with Business/Marketing aptitude or a Bachelor's in Business with work experience in a technical sales field, • Knowledge and understanding of interconnect solutions industry, • 5+ years of fieldsales and applications experience, or related experience (inside sales or customer service with interconnect, passive, electromechanical components), • Sales skills to successfully negotiate a technical design win, approved vendor status, contracts, and customer partnership., • Technically astute with an ability to acquire extensive product and application knowledge, with an ability to assess, and provide solutions for, customer design challenges/needs, • Self-motivated and driven to identify, qualify and pursue new customers and new markets, • Ability to effectively communicate across the engineering and managerial functions of a business, • Strong oral and written communications to provide high level customer service and build relationships, • Organizational skills to anticipate, prioritize, plan, organize to meet and exceed strategic objectives, • Leadership skills to assess and drive new opportunities in a global account environment, • Knowledge of modeling tools Pro E or Solidworks Amphenol is an "Equal Opportunity Employer" - Minority/Female/Disabled/Veteran/Sexual Orientation/Gender Identity/National Origin For additional company information please visit our website at

Company Overview esVolta is independently owned, and we are among the largest players in the US energy storage sector with about 1.5 GWh of projects in operation or construction, and a 20+ GWh development pipeline. We are headquartered in Newport Beach, California, with employees in multiple regions across the U.S. Our diverse management team has many decades of experience in the renewable energy, utility, and independent power sectors. esVolta is an innovative industry leader in development, design, construction, financing, and management of utility scale energy storage projects. At esVolta, every employee makes an impact on the company’s growth and profitability every day. We have a fast-paced, high-performance, and team-oriented culture. We value quality of life and flexibility for our employees and strive to help our team members achieve their career goals. About the Role We are seeking motivated and energetic individuals to join as an Interconnection Engineer to support the execution of utility scale battery energy storage projects form development through commissioning. The Interconnection Engineer will report to the company’s Interconnection Director and will work across the organization in an individual contributor capacity, supporting the interconnection process through Development, pre-construction and project execution. Core Responsibilities • Lead and facilitate communication and coordination between Project Development, EPC, and Market Operations teams to achieve seamless interconnection of utility-scale storage projects., • Guide the development of necessary systems and processes to ensure that technical inputs and assumptions are vetted at each stage of a project’s lifecycle, from Interconnection Request through to Commercial Operations, to ensure seamless handoffs between Development, EPC, and Asset Management as a project matures., • Facilitate the interconnection process by preparing and filing interconnection requests, providing guidance and support to internal and external parties on the development of technical materials. Support project execution by reviewing transmission system analysis, interconnection agencies and procedures., • Lead the review of all interconnection-related studies, including those performed by consultants and transmission owners. Prepare for and participate in study review meetings and document key outcomes., • Analyze interconnection due diligence materials to support project acquisition efforts, identify existing and potential red flags., • Support the electrical design and associated interconnection application process for utility scale storage projects., • Register as the Company’s point of contact or authorized user for each transmission owner’s portal (i.e. CAISO, WECC Utilities, Eastern Interconnect RTOs and utilities, etc.)., • Lead utility status calls, maintain utility relationships, and manage utility performance to tariff deadlines.Project Standard and Certification Compliance Assurance, • Ensure project compliance with GIA, and utility standards., • ABET accredited bachelor’s degree in Power Systems, electrical engineering or related field. PE or equivalent Certification preferred., • 3+ years of experience in renewable or clean energy design and interconnection, with deep understanding of tariff structures and business practices within CAISO, WECC markets, or Eastern Interconnect markets., • TARA, PSSE, PowerWorld, PSLF, or other Powerflow software experience required., • UPLAN, PLEXOS, or other market simulation and forecasting tool experience preferred., • Programing experience preferred., • Proven ability to leverage deep knowledge of interconnection studies (SIS, Facilities Studies, etc.) within the CAISO, WECC markets, or Eastern Interconnect markets to assess project feasibility and guide development decisions. Must be able to clearly explain technical study results to a non-technical audience., • Strong knowledge of transmission systems and transmission expansion plans in US., • Familiarity with battery energy storage systems (BESS) design and technical standards preferred., • Proficiency in interpreting electrical diagrams, site plans, and preparing interconnection request packages., • Experience with substation design and transmission-level power system protection and coordination is preferred., • Working knowledge of NERC planning standards and FERC rules and regulations., • Strong proficiency with Microsoft 365., • Superior communication and presentation skills, both written and verbal., • Outstanding interpersonal skills, including an ability to maintain calm and effective exchanges by all parties during stressful situations, and executive level reporting that ensures timely action and decision making in time-pressured scenarios., • Open to change based on diverse input and feedback., • Willingness to be remotely based and ability to travel to project sites., • Willing to travel up to 15%., • Demonstrate strong teamwork orientation, initiative, communication, problem solving, organizational and leadership skills. $140,00020% • 401k program with 6% match, • 20 vacation days, 5 sick days and 9 observed holidays, • Medical, dental and vision care benefits We celebrate all forms of diversity and are committed to creating an inclusive environment for all employees. However you identify or whatever your path here, we encourage you to apply. We will ensure that individuals with disabilities are provided reasonable accommodation to participate in the hiring process, perform essential job functions, and receive other benefits and privileges of employment.

At Wyetech, you’ll be at the center of an award-winning corporate culture, breaking technological barriers and solving real-world problems for our federal government customers. We are committed to hiring the best of the best, and in return, we offer a world-class, truly unique employee experience that is rare within our industry. The primary role of the Software Engineer 2 is to drive research, modernization, and innovation initiatives across mission-critical systems. This role focuses on evaluating existing production environments, identifying modernization opportunities, and delivering rapid, validated solutions through structured trade studies and short-duration experiments. You will collaborate directly with mission stakeholders to assess system gaps, design fail-fast experiments, and lead proof-of-concept development efforts that influence long-term architectural direction. Your work will directly impact modernization strategies, cloud adoption, and enterprise re-architecture efforts. Limited telework available Due to federal contract requirements, United States Citizenship and position appropriate security clearance is required. (e.g. Active TS/SCI security clearance with agency appropriate polygraph). • Engage with mission stakeholders to identify operational challenges and modernization opportunities, • Conduct trade studies and produce detailed technical research reports with actionable recommendations, • Design and execute short-duration (one-week) fail-fast experiments to validate feasibility, • Lead development of proof-of-concept solutions within six-week timelines, ensuring weekly demonstrable, • milestones, • Provide accurate time, scope, and resource estimates to maintain mission schedules, • Collaborate with cross-functional teams to integrate successful prototypes into operational environments, • Plan and support replatforming, rearchitecting, and refactoring of monolithic applications into cloud-native, • solutions, • Apply secure authentication, authorization, and PKI principles within modernized architectures, • Continuously evaluate emerging technologies and propose innovative mission-aligned solutions, • TS/SCI with agency appropriate poly, • Bachelor’s degree in Computer Engineering, Computer Science, Electrical Engineering, Math, or Physics is required or equivalent combination of education, training, and experience, • Minimum 14 years of relevant experience in software engineering, modernization, or solution architecture, • Strong proficiency in Java, Python, and JavaScript (ReactJS), • Experience with AWS services including EC2 and S3, • Hands-on experience with REST-based services and modern API development, • Experience with the Atlassian Tool suite of software development and management products (Confluence, • and Jira), • Familiar with SAFe Agile principles, methodologies, and best practices, • Experience with system administration of solutions related to metrics and monitoring, including Splunk, • Experience configuring and sustaining VMware ESXi/Virtualization environments, • Experience with IaC principles and automation tools including Ansible, • Experience with containerization and orchestration tools such as Docker and Kubernetes, • Strong understanding of authentication and authorization frameworks including OAuth2 and OpenID Connect, • Experience working with PKI and certificate management, • Experience working in Agile development environments, • Must meet LCat Capabilities Requirements, • Experience conducting modernization trade studies and architectural assessments, • Experience with graph databases such as Amazon Neptune or Neo4j, • Familiarity with AI/ML tools such as TensorFlow, PyTorch, or Hugging Face, • Experience with GoLang, • Experience with Grafana, • Experience with identity and access management platforms such as Keycloak, • Experience with CI/CD tools including Jenkins, GitLab CI, or GitHub Actions, • Familiarity with build tools such as Maven, • Experience designing scalable, cloud-native architectures for mission systems, • Ability to interpret ambiguity and translate high-level needs into technical solutions, • Comfortable guiding junior developers and organizing tasking within collaborative teams, • Experience working in fast-paced, evolving mission environments, • A Choice of Medical Plan Options, some with Health Savings Account (HSA), • Vision and Dental, • Life and AD&D Benefits, • Short and Long-Term Disability, • Hospital Indemnity, Accident, and Critical Illness Insurances, • Optional Identity Theft and Legal Protection Services, • Employee Referral Bonus Eligibility up to $10,000, • Mobility Among Wyetech-supported Contracts, • Various contract and work locations throughout Maryland, Virginia, Colorado, Texas, Utah, Alaska, Hawaii and OCONUS, • Various team-building events throughout the year such as: monthly lunches, summer company picnic, and an annual holiday party.

The climate crisis is the defining challenge of our time—but it’s also the greatest opportunity for innovation, and a challenge we’re proud to take on. At Overstory, we’re harnessing cutting-edge technology to enable a resilient electrical grid that keeps communities thriving as our world changes. The grid is the backbone of life as we know it. It powers hospitals, keeps food fresh, and ensures communities stay connected. But extreme weather, aging infrastructure, and growing wildfire risks are putting this critical system under pressure. All of this combined makes the electric utility industry the greatest opportunity for tackling climate change. One of the leading causes of catastrophic wildfires and power outages? Trees and brush coming into contact with power lines. That’s where we help. At Overstory, we use AI and advanced satellite imagery to pinpoint and prioritize vegetation risks before they materialize. By giving utilities critical analysis on those risks, we’re helping prevent outages, reduce wildfire risks, and accelerate the transition to a safer, more resilient grid. Our team spans the Americas and Europe, and we work with utility partners across the Americas and beyond. We’re outdoor enthusiasts, musicians, artists, athletes, parents, and adventurers—15 nationalities strong and growing. What unites us is a passion for solving complex problems, a commitment to climate action, and the belief that technology should be a force for good. Join us to help us build a more resilient world together. As a Staff Engineer, you will lead the development across teams that own core geospatial products and internal data-processing and annotation tools at Overstory. Your breadth of skills will allow you to set a technical vision for the development of the web applications, ETL pipelines, and backend services owned by these teams. Here at Overstory our Staff Engineers are hands-on technical leaders whose influence extends beyond their team either through leading cross team initiatives, making technology choices for critical aspects of our technology platform or solving for critical technical challenges within teams enabling our business to achieve our rapid scaling plans (growing 3x YoY). You’ll lead by example and mentor other engineers to follow good practices regarding software development, system design, team processes, QA and project management. You’ll routinely be involved in other teams’ projects to leverage or enable their own products by giving them access to timely and quality data. You would also occasionally meet with customers to understand their technical needs regarding prospective features. This role will start off being primarily team scoped solving critical scaling challenges. There is scope to expand remit as we grow. • Explore best practices to combine coding agents with software craftsmanship and teach other engineers these practices, • Optimize the orchestration of several object detection and image alignment models, • Design and maintain robust data and feature pipelines for millions of geospatial entities, • Set the technical vision for the development of our internal annotation and QA web applications, • Work closely with your Product Manager to discover and propose new products to solve use cases such as anticipating the impact of an outage at a particular locatio, • You love working in a remote-first, fast-moving environment where collaboration and adaptability are essential., • You are based in Europe (CET, GMT) or Eastern Time (ET) zone (US or Canada) to support teammates both in Europe and on the West Coast, • 7+ years of experience as a Senior or Staff Engineer, Tech Lead, Architect or Engineering Manager, • Strong background building and maintaining scalable web-applications with React, FastAPI, PostgreSQL, • Track record of leading architectural discussions and mentoring other engineers., • Experience with orchestrating and monitoring ML systems in production, • Skilled in designing ETL pipelines with near-real-time orchestration, • Strong communication skills and ability to explain complex technical concepts to various audience, • Experience with the Geospatial ecosystem such as PostGIS, or Deck.GL, • Experience with Dagster, Airflow or similar orchestration frameworks, • Experience with XP practices such as TDD or trunk based development. The team would be new to these practices, • Experience with building web-applications tailored for repeatable human or agentic workflows, • Experience working in B2B, in particular with electrical utilities, • To be part of truly mission-driven work that reduces wildfires, protects earth’s natural resources and helps solve our climate crisis., • Flexible working environment with a lot of autonomy. We build our work days around our lives, not the other way around., • Other benefits like a remote working budget, an educational budget and time to develop new skills., • To be surrounded by an excellent, vibrant, smart team who have each other's back and believe in a culture of openness, tolerance and respect., • Equity and a competitive salary We are a group of 100 people from all over the world. Fifteen nationalities are represented in our team. We work remotely from eleven different countries and we are looking for candidates that are also living and working in one of these countries: United States, the Netherlands, United Kingdom, Ireland, Estonia, Portugal, France, Sweden, Denmark, Switzerland, and Canada. We meet up once a year in-person for our unforgettable team gathering event. We also offer the option to occasionally meet up for in-person collaboration. We place enormous value on diversity and inclusion and strive to continually bring in people of all genders, races, creeds, ethnicities, abilities and backgrounds. We believe that the best ideas emerge when people with different perspectives and approaches work together on a problem. We’re always looking to diversify our team further, but we’re proud of the fact that four out of the nine people on our leadership team are female, 46% of the overall team are female and 20% of the team are people of color. Our team speaks fifteen languages: English, Dutch, French, Spanish, German, Italian, Portuguese, Russian, Luxembourgish, Lithuanian, Bulgarian, Cantonese, Estonian, Danish and Korean. Tackling the climate crisis is our greatest mission. We act with urgency. Our curiosity fuels our growth. We recognize that change is constant, and we find joy and power in exploration. We’re rooted in diversity. Just as ecosystems need biodiversity to thrive, our resiliency comes from our differences. We care for each other. We love the power of machines but we nurture each other as humans. Trust is fundamental. We assume the best in everyone, and we share ideas openly so that we have a positive impact. Use of AI in Our Hiring Process We sometimes use AI tools to support parts of our hiring process, such as helping us manage applications more efficiently or ensuring job descriptions are clear and inclusive. But don’t worry, all hiring decisions are always made by people, not machines. Any data processed by AI is handled securely in line with GDPR and our ___.

At Henderson, we're about more than just buildings We're about the people, experiences, and potential found inside. We're a company of problem-solvers and innovators known for our technical excellence and ability to come up with out-of-the-box solutions. We love the process of bringing buildings to life. And we're changing the industry by integrating the building design and construction process. As an ESOP, each of our employee-owners are an essential part of our mission to lead the industry in innovation, sustainability, and client experience. With a vision to build a better world, Team Henderson has a people-first culture and diverse portfolio of world-class facilities. It's What We Do We provide total building system design services across multiple high-growth markets for industry leaders. You'll get to use your talent to work on projects for some of the biggest names in mission-critical, higher education, sports, healthcare, grocery, restaurant, and retail within the sectors we serve in business, community, grocery, health, retail, & venue. It's How We're Different We're about more than just buildings. We're about you. You, and the hundreds of passionate employee-owners who make us who we are. We've always been committed to providing an inclusive workplace where people can bring their full self to work and helps people reach their full potential - both as professionals and individuals. Together, we dream up innovative solutions for industry-wide problems, design spaces that become landmarks, and toast the good life at our happy hours. Take a peek into what makes us different here: ___ Position Overview: As an experienced plumbing design engineer at Henderson Engineers, you will have the opportunity to contribute your expertise to our six market various sectors, including Business, Community, Grocery & Distribution, Health, Retail, and Venue. Within each sector, we seamlessly integrate our engineering knowledge with the in-the-field experience of our sister company, ___, to deliver a client experience unlike any other in the industry. To learn more about the facilities included in our sectors check out our website: ___ Key Responsibilities: • Performs calculations and designs basic to advanced engineering systems with a high degree of independence., • Prepares basic to advanced electrical system layouts, detailed drawings, and schematics., • Review shop drawings for conformance to plans and specifications., • Performs research and makes recommendations as to the feasibility of systems or equipment. Evaluates products for their application., • Assists with developing, establishing, and maintaining relationships with strategic partners and customers in support of business development and/or pursuit activities., • Proactively seeks opportunities for continuous learning and understanding of industry software, including Revit, Bluebeam Revu, and Microsoft Office Products., • May support or be responsible for project coordination activities such as managing emails, coordinating scope and schedule, attending client meetings, ensuring project quality, responding to client questions, and coordinating project delivery., • Acts as a resource for training or assisting others as needed. Required Qualifications: Mid-Level: • Bachelor's degree in relevant field of engineering preferred (i.e.: mechanical, electrical, fire protection or architectural) and 7 years of relevant experience, or 9 years of experience without degree required. Professional Engineering (PE) license may be counted toward 1 year of direct experience., • Intermediate to Advanced proficiency in Revit and Bluebeam Revu. Preferred Qualifications: • Professional Engineering (PE) license., • Completion of FE exam, LEED and/or WELL accreditation. Individual salaries may be higher or lower than the stated range depending on factors unrelated to the applicant's race, color, religion, gender, sexual orientation, gender identity, national origin, ethnicity, age, or disability. Salary can vary from this range based on geographic cost of labor statistical differentials. Salary ranges: New York Salary Range: $85,263 - $146,775 Los Angeles Salary Range: $81,070 - $139,556 Denver Salary Range: $76,877 - $132,338 Philadelphia Salary Range: $76,877 - $132,338 Las Vegas Salary Range: $73,382 - $126,323 NOTICE TO CANDIDATES: RECRUITMENT FRAUD ALERT Henderson representatives conduct all email communications exclusively through a company email address that ends with @hendersonengineers.com, @hendersonbuilding.com. We extend offers of employment only after a comprehensive interview process and will never ask you for a payment of any sort nor offer one for any reason. Henderson will not ask any applicant to purchase equipment, nor offer to reimburse any applicant for expenses incurred prior to employment. We will not request personal information until a legitimate offer of employment has been extended. If you suspect a recruitment attempt is fraudulent, you should cease communications. You may contact us at ___ to verify whether a recruitment contact is legitimate. All legitimate job opportunities are posted on our company website's careers page.

Job Locations US-NY-New York Requisition ID 2026-12484 Category Project Management Are you looking for a highly rewarding opportunity that provides extensive career growth opportunity? Gilbane is seeking a MEP Commisioning Reviewer that will serve as the School Construction Authority's on-site representative overseeing one or more construction projects at various stages of development. This role will sit primarily on the job site. Who are we? As a Top-10 ENR Contractor, Gilbane is a family-owned business with 45 offices that has been shaping communities since 1870. Consistently recognized as one of the most reputable construction management firms in the country, Gilbane is committed to delivering projects safely and on-time. You will have the opportunity to build schools, labs, hospitals, corporate offices, sports arenas and more! We are dedicated to building a diverse, inclusive and authentic workplace, so if you're excited about this role but your past experience doesn't align perfectly with every qualification in the job description, we encourage you to apply anyway. You may be just the right candidate for this or other roles. Who are you? You are someone who acts inclusively, showing empathy and treating others with respect and dignity in order to uphold Gilbane's core value of Caring and "People First" workplace culture. You seek to listen in order to understand and can convey information clearly. You're a strong problem solver who can identify, prioritize, and implement alternatives for solutions, and you demonstrate adaptability by collaborating with others and supporting team members to achieve excellence. A self-starter who shows passion, commitment, and ownership all while delivering on business outcomes and driving results. You're someone who identifies opportunities for new and improved ways of doing things that result in value-add solutions. Your core values match Gilbane's: Integrity, Caring, Teamwork, Toughmindedness, Dedication to Excellence, Discipline, Loyalty, and Entrepreneurship. What's in it for you? Gilbane offers employees multi-dimensional training opportunities through a number of resources. While managing your responsibilities to projects, you will be able to enroll in trainings through our award-winning Gilbane University to build leadership and technical skills. In addition, you would work with an experienced team which provides you with the opportunity to learn new industry skills every day. You will protect and promote the interests of both Gilbane and the client in all matters as well as demonstrating the personal characteristics of a developing leader. The MEP Commissioning (Cx) Engineer supports the Supervisor in managing and overseeing the commissioning process of Mechanical, Electrical, and Plumbing (MEP) systems for various Capital Improvement Projects (CIP) and Capacity projects. This position is responsible for ensuring commissioning compliance with SCA standards and applicable regulatory requirements including the New York City Energy Conservation Code (NYCECC), ASHRAE 90.1, and SCA Green Schools Guide (LEEDv5 equivalent). Systems Commissioned Mechanical Systems - HVAC&R equipment and associated controls Plumbing Systems - Domestic hot water systems, domestic and process water pumping, and mixing systems. Electrical Systems - Electrical service and distribution, Lighting, receptacle and lighting controls Emergency Power Systems - Emergency generators and Automatic transfer switches Renewable Energy Systems - Photovoltaic (PV) system Other systems, equipment and components that are used for heating, cooling or ventilation and that affect energy use. Key Duties • Effectively manage the commissioning process for projects requiring MEP systems commissioning across design, construction, start-up, and post-occupancy phases., • Assign work to SCA commissioning consultants and review proposals for MEP commissioning services during both design and construction phases to ensure scope alignment, technical adequacy, and compliance with SCA standards, while also overseeing consultant payment request processing., • Assist the supervisor in managing SCA consultants engaged in MEP commissioning design reviews, construction phase oversight, and project closeout activities., • Review and update construction checklists (pre-functional checks) for all equipment and systems to be commissioned, ensuring alignment with Contract specifications, SCA design standards, applicable codes and regulatory requirements and Project-specific performance criteria Alternatively, review this documentation when prepared by third-party consultants., • Review and update functional performance test procedures for all commissioned systems to ensure verification of proper installation, system integration, sequence of operations, and performance under all modes of operation. Alternatively, review these procedures when developed by third-party consultants., • Support project commissioning closeout activities by coordinating with commissioning consultants, SCA departments, consultants, and contractors, including organizing and leading recurring borough meetings and project-specific meetings., • Handle multiple projects at the same time., • NYS licensed P.E. or R.A. preferred., • Minimum years of MEP commissioning experience (design review, pre-functional and functional test procedures, construction phase oversight). For (New York) this ranges from $110,000-$145,000 plus benefits and retirement program. Gilbane offers an excellent total compensation package which includes competitive health and welfare benefits and a generous profit-sharing/401k plan. We invest in our employees' education and have built Gilbane University into a top training organization in the construction industry. Qualified applicants who are offered a position must pass a pre-employment substance abuse test. Gilbane is an Affirmative Action/Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to age, color, national origin, race, religion, sex, sexual orientation, gender identity, protected veteran status, or disability status. Note to Recruiters, Placement Agencies, and Similar Organizations: Gilbane does not accept unsolicited resumes from agencies. Please do not forward unsolicited agency resumes to our jobs alias, website, or to any Gilbane employee. Gilbane will not pay fees to any third party agency or firm and will not be responsible for any agency fees associated with unsolicited resumes. Unsolicited resumes received will be considered property of Gilbane and will be processed accordingly. We can recommend jobs specifically for you! Click here to get started.

Job DescriptionJob Title: Electrical Design Engineer – Power Distribution (Switchboards & Panelboards) Job Location: Kearny, NJ In-Office, Hybrid or Remote: On-site Working Hours: Full-time Languages: English required What the Client Offers: * Salary: USD $110,000 – $130,000 * Comprehensive benefits package * Paid time off + 10 company holidays * Tuition reimbursement * 401(k) with strong employer contribution * Stable, growth-oriented environment within a specialized engineering sector * Relocation support available for the right candidate About the Client: Inner Circle Agency is hiring on behalf of a well-established engineering and manufacturing organization specializing in power distribution and electrical infrastructure. The company supports critical industries including energy, telecommunications, and industrial systems, delivering high-performance, safety-compliant solutions. Role Overview: Our client is seeking a detail-oriented Electrical Design Engineer to design low voltage switchboards and panelboards. This role is based in the Kearny, NJ area, with relocation support available for the right candidate. You will play a key role in developing complex electrical systems and collaborating with cross-functional teams to bring designs from concept to production. Key Responsibilities: * Design low voltage switchboards and panelboards in compliance with applicable standards and regulations * Create 3D sheet metal components and flat patterns * Develop complex 3D assemblies with large multi-component BOMs * Produce wiring diagrams including PLCs, relays, breakers, and power systems * Generate 2D drawings including layouts, single-line diagrams, and front views * Collaborate with engineering, manufacturing, and vendors to ensure accurate execution * Translate client requirements into practical and efficient design solutions Qualifications:Required: * Bachelor’s degree in Mechanical or Electrical Engineering (or related field) * 3 to 5 years of experience in an electro-mechanical or similar environment * Strong proficiency in 2D and 3D CAD software (Autodesk preferred) * Solid understanding of electrical systems and design principles * Strong communication and collaboration skills Preferred: * Experience with UL standards (UL891, UL67, UL508A, UL1558) * Familiarity with the National Electrical Code (NEC) * Experience sizing conductors and overcurrent protection devices (OCPDs) * Knowledge of control circuits and electrical logic

Job Description Watch your work come to life in landmark projects around the world when you partner with Syska Hennessy Group! As a global leader in consulting, engineering, and commissioning services, we specialize in highly technical buildings and the systems that bring them to life. We are seeking a Supervising Electrical Engineer to join our New York, NY office. As a Supervising Engineer, you will be responsible for representing the Firm in all interactions with clients, contractors, architects, and other project team members. You will be responsible for supervising, coordinating, and assigning various projects to be performed by the team. Our dynamic work environment provides the optimal setting to take your engineering career to the next level. From our supportive culture, diverse workforce, and competitive compensation to our flexible work schedule Monday to Thursday in the office for 9 hours and Friday for 4 hours remotely at home and fun social events, it is everything you will need for an exciting, challenging, and rewarding career. Job Responsibilities As a Supervising Electrical Engineer, you will be responsible for supervising and leading coordination meetings. You will lead and supervise staff members as they perform their tasks, and participate in budgeting, scheduling, and staff management. Additional responsibilities include: • Providing periodic objective and comprehensive employee evaluations., • Acting as "Engineer of Record" on dedicated projects., • Assisting Technical Manager and Chief Engineer in business unit technical training and staff mentoring., • Coordinating and assigning various projects to be performed by the engineering team (i.e., system design and project engineering)., • Establishing design standards, specifications, and criteria for projects., • Leading and supervising staff members as they perform their tasks., • Managing Construction Administrative duties, such as field reports, responses to RFIs, processing Bulletins and Addenda, etc. (PM)., • Coordinating with accounting to prepare monthly project invoices. Monitoring project accounts receivable and contacting the client as needed to expedite payment., • Monitoring all correspondence between staff, clients, contractors, Owners, etc., • Participating in and contributing to the firmwide Expert Teams committee., • Participating in budgeting, scheduling, and staff management., • Preparing proposals and administering project contracts between Syska Hennessy Group and the client, including add service agreements., • Supervising and leading coordination meetings. Someone with a history of working with Critical Facilities and Healthcare projects would be a good fit for this dynamic role. Additional requirements include: • Bachelor's degree in Electrical engineering from an Accredited Institution, • 10+ years' experience working in a consulting firm, this is a Senior level role that requires a background in the MEP Engineering Industry, • 3 years of supervisory experience, • Hands-on design and CAD/REVIT experience, is required, as you will have a strong technical role and will need to direct CAD/REVIT staff As an employee with Syska Hennessy Group, you will be part of a global firm with an amazing history! We are committed to being the best, advancing engineering design practice, and supporting our clients with integrity. To make all of that happen, we rely on the talent, drive, enthusiasm, and total job satisfaction of the great people who work here. As a member of our highly collaborative team, we provide you with a flexible benefits package that reflects our respect for your workplace contributions, professional goals, and personal priorities. The personal benefits program at Syska Hennessy Group includes: • Robust, comprehensive medical, dental, vision, life insurance and supplemental benefit plans, • 401(k) plan with a generous employer matching program, • Training and professional development courses, • Professional development incentive bonuses, • Dynamic Employee Resource Groups, • Competitive Paid Time Off (PTO) policy, • Transit/parking employer stipend Syska Hennessy Group | Integrating the best minds and technology to help clients create exceptional environments. The salary range listed below is for this particular job posting. Actual pay range for candidates will be commensurate with candidate's experience, skillsets and competencies and may differ based on the cost of labor in their particular location. New York Pay Range$120,150—$180,226 USD

Job DescriptionDescriptionA great place to work and grow, Naik Group is a dynamic, multi-discipline engineering company with offices in New York and New Jersey. Our continued growth in this highly competitive market is evidence of the trust and value clients place in our services’ quality and timeliness. Included in the full range of professional services we offer are Bridge/ Structural Design & Inspection, Highway/Roadway Engineering, Civil/Site Engineering, Traffic Engineering/ITS, Utility Engineering, Construction Management & Inspection, Design Build, Survey, Right of Way, and High Definition 3-D Laser Scanning. Our principals take considerable pride in their approach to the firm’s management, offering services like that of a large organization while demonstrating the personal client and consultant relationship of a small firm. Naik Consulting Group is currently seeking a Junior Communication Engineer (EIT). The Junior Communications Engineer will support the planning, design, coordination, and implementation of communications and low-voltage systems for large-scale infrastructure and transportation projects. The ideal candidate has hands-on experience with fire alarm systems, network systems, and low-voltage communications, and is comfortable working in a multidisciplinary construction and engineering environment. This role will collaborate closely with design teams, construction managers, contractors, and public agency stakeholders to ensure systems are compliant, constructible, and successfully delivered. Responsibilities • Design, review, and coordinate fire alarm systems in accordance with applicable codes, standards, and authority having jurisdiction (AHJ) requirements, • Develop and review communications and low-voltage system designs, including structured cabling, fiber optics, CCTV, access control, PA/VMS, and network infrastructure, • Support infrastructure and transportation projects such as transit facilities, tunnels, stations, roadways, bridges, and related facilities, • Review contractor submittals, shop drawings, RFIs, and technical proposals, • Provide construction-phase support including site inspections, testing and commissioning support, and system acceptance, • Coordinate system interfaces with IT, electrical, and other building systems, • Ensure compliance with project specifications, industry standards, and safety requirements, • Participate in meetings with clients, agencies, designers, and contractors, • Assist with cost estimates, schedules, and risk assessments related to communications systems Qualifications • Bachelor’s degree in Electrical Engineering, Communications Engineering, or a related field (or equivalent experience), • 2+ years of experience in communications or low-voltage systems within construction, engineering, or infrastructure projects, • Engineer in Training (EIT) certification required, • Working knowledge of relevant codes and standards (e.g., NFPA, NEC, local AHJ requirements), • Experience supporting construction management or design-build projects, • Strong technical writing and communication skillsPreferred Qualifications, • Experience on transportation or infrastructure projects (transit, rail, roadway, aviation, or utilities), • Professional Engineer (PE) license preferred, • NICET certification (Fire Alarm or related disciplines), • Familiarity with public agency projects and compliance requirements, • Experience with system integration and testing/commissioning processes BenefitsNaik offers a competitive compensation package including: • Holiday and paid-time-off programs, • 401(k) Plan and Match, • Career Path Development Program (Management & Technical Career Tracks), • Tuition Reimbursement, • Competitive health and dental insurance premiums, • Short-Term Disability/Long-Term Disability, • Life insurance, • Employee Assistant Program (EAP), • Flexible Spending Account, • and MoreNaik is a Drug and Alcohol-Free workplace, an Equal Employment Opportunity employer and E-Verify employer. We are committed to pay transparency and fairness in hiring. This posting complies with the Pay and Benefit Transparency Laws, which requires employers to disclose compensation and benefits information in all job advertisements.

• Perform delivery of projects and enhancements in support of the university's various enterprise systems and providing guidance to application developers including business analysis, high level design, detailed design, development, testing, implementation, and on-going maintenance of enterprise systems operations., • Assist with implementing reporting and analysis solutions., • Guide application developers on complex business systems analysis, software development, and information systems implementations and integrations to ensure successful delivery of planned projects., • Operate under firm deadlines managing multiple assignments concurrently and independently with minimal supervision., • Work closely with other teams within the Information Services & Technology division in solving ad-hoc information management issues using the most current information technologies available., • Assess the complexity of the solution, plan and manage the application delivery, guiding the work of other technical team members and managing task dependencies as applicable., • Lead the assessment, installation, configuration, integration, deployment, and ongoing support of the ERP and third party vendor applications, including cloud platforms., • Provide technical leadership and mentorship to application developers as well as perform hands-on technical tasks, collaborate and guide the team to identify, analyze and fix technical issues and challenges.___, • Respond to incidents, service outages and service requests in a timely manner as delegated by the Assistant CIO, CRM and Student Information Systems and the Associate CIO, Enterprise Applications, and collaborate with other technical team members, functional partners and vendors for problem resolutions., • Ensure application systems integrity by performing periodic software audits and maintain appropriate change control, test plans and code review documentation for audit purposes., • Collaborate with the Manager, Architecture and Integration to ensure new software integrations meet functional requirements, system compliance, and interface specifications., • Oversee the daily activities of project teams and liaison with team members, management, and campus partners to ensure the successful and timely delivery of project commitments., • Identify and mitigate risks and form appropriate contingency plans., • Research and propose systems enhancements, vendor solutions, process improvements and automations to address functionality gaps and meet new functionality demands and business needs and prepare documentation of rationale to share with team members and campus partners., • Participate in peer-reviews of solution designs and related code. Package and support deployment of releases. Work with team members in IST for migration of legacy applications., • Ensure quality of deliverables by establishing and following best practices and standards., • Perform other duties as assigned and as needed, including readiness to support after hours and weekends. Requires a Bachelor's degree in Electrical Engineering and 3 years of experience in job offered or 3 years of experience as a Software Engineer or any other job title performing the following job duties:, • Configuring and testing implementation of student information systems and/or patient vitals device capture equipment;, • Supporting the IT and enterprise information system needs of department heads;, • Developing workflows according to business requirements;, • Performing final user acceptance testing;, • Reviewing data quality issues;, • Analyzing and testing system solutions;, • Providing user support and troubleshooting with colleagues;, • Advising staff of system upgrades, releases and patches; and

As the global leader in high-speed connectivity, Ciena is committed to a people-first approach. Our teams enjoy a culture focused on prioritizing a flexible work environment that empowers individual growth, well-being, and belonging. We're a technology company that leads with our humanity-driving our business priorities alongside meaningful social, community, and societal impact. How You Will Contribute: The Wavelogic family of products is widely used in Ciena's optical fiber transmission solutions and is one of the main contributors to Ciena's success in the telecommunications industry. To further strengthen our team, we are looking for an expert digital verification engineer who will be involved in the verification of these products, working within a team of digital design engineers, verification engineers and architects, in our Rochester NY office. Your role as an expert digital verification engineer will be to propose and implement innovative verification strategies, in order to thoroughly simulate and validate functional blocks, cores, and subsystems for the Wavelogic family of products.Following are examples of responsibilities in this role, however the role is not necessarily limited to this list and can vary from project to project: • You will be expected to quickly understand the architecture and functional requirements of the project in order to effectively communicate and collaborate with systems engineers and architects., • You will be responsible for the complete and detailed validation of entire subsystems by using an appropriate combination of simulation, formal and coverage methods., • You will be responsible for creating, reviewing and optimizing simulation environment components, test case scenarios as well as functional coverage and formal verification test plans., • You will be expected, if/when appropriate, to lead focused groups of individuals or mentor individuals and manage their priorities towards reaching a specific set of objectives, • You will be accountable for estimating schedules, and once approved track them towards timely completion, while providing clear and precise status updates at regular intervals, • Possibility of reporting directlyto the Senior Manager as an ASIC Verification Prime, • As an ASIC verification Prime, you would be responsible for all aspects of the verification of the digital portion of the Serdes as well as working with partner teams to ensure overall Serdes coverage., • Minimum Bachelor's degree in Electrical or Computer Engineering, Computer Science or other applicable scientific degree coupled with expert level experience in the use of System Verilog, UVM, SVA, and simulators from major vendors., • Proven ability in determining appropriate and comprehensive digital verification and coverage strategies, • Highly motivated self-starter, able to work independently, while being a great teammate, • Ability to methodically address (debug) sophisticated technical problems., • Excellent organization, written and oral English communication skills. Assets: • Experience with, • Formal verification methods, • DSP and/or Forward Error Correction, • Using Jira for bug tracking and GIT for source code management and revision tracking, • Familiarity with programming languages such as: Python, Make, bash, object-oriented programming, C, C++. The annual salary range for this position is $147,100 - $234,900. Pay ranges at Ciena are designed to accommodate variations in knowledge, skills, experience, market conditions, and locations, reflecting our diverse products, industries, and lines of business. Please note that the pay range information provided in this posting pertains specifically to the primary location, which is the top location listed in case multiple locations are available. Non-Sales employees may be eligible for a discretionary incentive bonus, while Sales employees may be eligible for a sales commission. In addition to competitive compensation, Ciena offers a comprehensive benefits package, including medical, dental, and vision plans, participation in 401(K) (USA) & DCPP (Canada) with company matching, Employee Stock Purchase Program (ESPP), Employee Assistance Program (EAP), company-paid holidays, paid sick leave, and vacation time. We also comply with all applicable laws regarding Paid Family Leave and other leaves of absence. At Ciena, we are committed to building and fostering an environment in which our employees feel respected, valued, and heard. Ciena values the diversity of its workforce and respects its employees as individuals. We do not tolerate any form of discrimination. Ciena is anEqual Opportunity Employer, including disability and protected veteran status. If contacted in relation to a job opportunity, please advise Ciena of any accommodation measures you may require.

Regional Sales Manager - Unistrut Construction - Northeast Region Who we are: Atkore is forging a future where our employees, customers, suppliers, shareholders, and communities are building better together - a future focused on serving the customer and powering and protecting the world. With a global network of manufacturing and distribution facilities, Atkore is a leading provider of electrical, safety and infrastructure solutions. Who we are looking for: Unistrut Construction, a division of Atkore, is a specialty subcontractor providing structural solutions for the Healthcare, Data Center, and Commercial Construction markets. We are looking to add a Regional Sales Manager - Northeast to our team. This Commercial role will build relationships with general contractors and subcontractors in the Northeast Region to help grow our business. Working with our pre-construction estimating and design team, the successful candidate will identify new opportunities and present solutions utilizing Unistrut Construction's design, engineering, fabrication, and installation services. This role requires achieving sales targets, negotiating deals, and collaborating with the team to provide exceptional customer service and value. Own all areas of the sales cycle including: • Establish relationships with regional General Contractors, • Communicate our value proposition and generate project opportunities., • Identify scope via detailed blueprint review and customer discussions and RFIs., • Hand off qualified opportunities to estimating with clear scope definition., • Deliver proposals, gather feedback, and negotiate and close contracts., • Partner with OEM and Data Center sales teams to win targeted projects., • Conduct site walks as needed to confirm scope, logistics, and safety requirements. The ideal candidate will have 8-10 years of healthcare or data center construction experience in either sales, project management, or estimating roles, ideally in the region and with established customer relationships. Additionally; • Enough technical aptitude to read blueprints and specifications., • Experience supporting large-scale, technically complex commercial construction projects with multiple stakeholders., • Ability and willingness to build out estimates and quotes., • Experience in lean manufacturing or business system-based company is a plus., • Strong understanding of the general construction engineer bid tender process., • Complete your Atkore immersion program., • Understand how your job will help deliver Atkore's strategy., • Reach out to GCs in the region and introduce yourself and solicit opportunities., • Read blueprints to find our scope effectively, • Find new projects and call customers to get invitations to bid, • Negotiate and win projects, • Understand the unique dimensions of your territory and know how to apply our value proposition to move out of "bid" lists and into partnerships, • Grow the region in both book-and-turn business and major projects, • Know where to bid on work that is a good fit and distinguish Join our team and align yourself with an industry leader! As of the date of this posting, a good faith estimate of the current pay for this position is $94,640 - $130,130. Placement in the range depends on several factors including, but not limited to, specific competencies, relevant education, qualifications, certifications, relevant experience, skills, seniority, performance, shift, travel requirements, and business or organizational needs and may change over time. Other compensation may include, but not limited to, overtime, shift differentials, bonuses, commissions, stock, and other incentives. Benefits available include: • Medical, vision, and dental insurance, • Life insurance, • Short-term and long-term disability insurance, • 401k, • Paid Time Off, • Paid holidays Applications are being accepted on an ongoing basis. Equal Opportunity Employer/Protected Veterans/Individuals with Disabilities This employer is required to notify all applicants of their rights pursuant to federal employment laws. For further information, please review the ___ notice from the Department of Labor.

As an employee-owned firm, we believe that putting our employees first, is not only the right thing to do, but also gives us the competitive edge to ensure our clients have an excellent experience! If you are an experience Electrical Engineer PE, then please apply! Why join us? Competitive Salary +

Placed by VanSpeag Group LLC | Client: Confidential – High-Tech Engineering with base offices in New York City.Role: Electrical Engineer – DC/DC High Frequency Power Electronics & Wireless Power Transfer.Discipline: Power Electronics / Mixed-Signal Hardware Design / Wireless Power Transfe

Lead AI Engineer Overview At Capital One, we are creating responsible and reliable AI systems, changing banking for good. For years, Capital One has been an industry leader in using machine learning to create real-time, personalized customer experiences. Our investments in technology infrastructure and world-class talent — along with our deep experience in machine learning — position us to be at the forefront of enterprises leveraging AI. From informing customers about unusual charges to answering their questions in real time, our applications of AI & ML are bringing humanity and simplicity to banking. We are committed to continuing to build world-class applied science and engineering teams to deliver our industry leading capabilities with breakthrough product experiences and scalable, high-performance AI infrastructure. At Capital One, you will help bring the transformative power of emerging AI capabilities to reimagine how we serve our customers and businesses who have come to love the products and services we build. Team Description: The Intelligent Foundations and Experiences (IFX) team is at the center of bringing our vision for AI at Capital One to life. We work hand-in-hand with our partners across the company to advance the state of the art in science and AI engineering, and we build and deploy proprietary solutions that are central to our business and deliver value to millions of customers. Our AI models and platforms empower teams across Capital One to enhance their products with the transformative power of AI, in responsible and scalable ways for the highest leverage impact. In this role, you will: Partner with a cross-functional team of engineers, research scientists, technical program managers, and product managers to deliver AI-powered products that change how our associates work and how our customers interact with Capital One. Design, develop, test, deploy, and support AI software components including foundation model training, large language model inference, similarity search, guardrails, model evaluation, experimentation, governance, and observability, etc. Leverage a broad stack of Open Source and SaaS AI technologies such as AWS Ultraclusters, Huggingface, VectorDBs, Nemo Guardrails, PyTorch, and more. Invent and introduce state-of-the-art LLM optimization techniques to improve the performance — scalability, cost, latency, throughput — of large scale production AI systems. Contribute to the technical vision and the long term roadmap of foundational AI systems at Capital One. The Ideal Candidate: You love to build systems, take pride in the quality of your work, and also share our passion to do the right thing. You want to work on problems that will help change banking for good. Passion for staying abreast of the latest research, and an ability to intuitively understand scientific publications and judiciously apply novel techniques in production. You adapt quickly and thrive on bringing clarity to big, undefined problems. You love asking questions and digging deep to uncover the root of problems and can articulate your findings concisely with clarity. You have the courage to share new ideas even when they are unproven. You are deeply Technical. You possess a strong foundation in engineering and mathematics, and your expertise in hardware, software, and AI enable you to see and exploit optimization opportunities that others miss. You are a resilient trail blazer who can forge new paths to achieve business goals when the route is unknown. Basic Qualifications: Bachelor's degree in Computer Science, AI, Electrical Engineering, Computer Engineering, or related fields plus at least 4 years of experience developing AI and ML algorithms or technologies, or a Master's degree in Computer Science, AI, Electrical Engineering, Computer Engineering, or related fields plus at least 2 years of experience developing AI and ML algorithms or technologies At least 4 years of experience programming with Python, Go, Scala, or Java Preferred Qualifications: 6 years of experience deploying scalable and responsible AI solutions on cloud platforms (e.g. AWS, Google Cloud, Azure, or equivalent private cloud) Experience designing, developing, delivering, and supporting AI services Experience developing AI and ML algorithms or technologies (e.g. LLM Inference, Similarity Search and VectorDBs, Guardrails, Memory) using Python, C++, C#, Java, or Golang Experience developing and applying state-of-the-art techniques for optimizing training and inference software to improve hardware utilization, latency, throughput, and cost Passion for staying abreast of the latest AI research and AI systems, and judiciously apply novel techniques in production Capital One will consider sponsoring a new qualified applicant for employment authorization for this position. The minimum and maximum full-time annual salaries for this role are listed below, by location. Please note that this salary information is solely for candidates hired to perform work within one of these locations, and refers to the amount Capital One is willing to pay at the time of this posting. Salaries for part-time roles will be prorated based upon the agreed upon number of hours to be regularly worked. Cambridge, MA: $197,300 - $225,100 for Lead AI Engineer McLean, VA: $197,300 - $225,100 for Lead AI Engineer New York, NY: $215,200 - $245,600 for Lead AI Engineer San Jose, CA: $215,200 - $245,600 for Lead AI Engineer Candidates hired to work in other locations will be subject to the pay range associated with that location, and the actual annualized salary amount offered to any candidate at the time of hire will be reflected solely in the candidate’s offer letter. This role is also eligible to earn performance based incentive compensation, which may include cash bonus(es) and/or long term incentives (LTI). Incentives could be discretionary or non discretionary depending on the plan. Capital One offers a comprehensive, competitive, and inclusive set of health, financial and other benefits that support your total well-being. Learn more at the Capital One Careers website . Eligibility varies based on full or part-time status, exempt or non-exempt status, and management level. This role is expected to accept applications for a minimum of 5 business days.No agencies please. Capital One is an equal opportunity employer (EOE, including disability/vet) committed to non-discrimination in compliance with applicable federal, state, and local laws. Capital One promotes a drug-free workplace. Capital One will consider for employment qualified applicants with a criminal history in a manner consistent with the requirements of applicable laws regarding criminal background inquiries, including, to the extent applicable, Article 23-A of the New York Correction Law; San Francisco, California Police Code Article 49, Sections 4901-4920; New York City’s Fair Chance Act; Philadelphia’s Fair Criminal Records Screening Act; and other applicable federal, state, and local laws and regulations regarding criminal background inquiries. If you have visited our website in search of information on employment opportunities or to apply for a position, and you require an accommodation, please contact Capital One Recruiting at 1-800-304-9102 or via email at . All information you provide will be kept confidential and will be used only to the extent required to provide needed reasonable accommodations. For technical support or questions about Capital One's recruiting process, please send an email to Capital One does not provide, endorse nor guarantee and is not liable for third-party products, services, educational tools or other information available through this site. Capital One Financial is made up of several different entities. Please note that any position posted in Canada is for Capital One Canada, any position posted in the United Kingdom is for Capital One Europe and any position posted in the Philippines is for Capital One Philippines Service Corp. (COPSSC).

Lead AI Engineer (AI Foundations) Overview At Capital One, we are creating responsible and reliable AI systems, changing banking for good. For years, Capital One has been an industry leader in using machine learning to create real-time, personalized customer experiences. Our investments in technology infrastructure and world-class talent — along with our deep experience in machine learning — position us to be at the forefront of enterprises leveraging AI. From informing customers about unusual charges to answering their questions in real time, our applications of AI & ML are bringing humanity and simplicity to banking. We are committed to continuing to build world-class applied science and engineering teams to deliver our industry leading capabilities with breakthrough product experiences and scalable, high-performance AI infrastructure. At Capital One, you will help bring the transformative power of emerging AI capabilities to reimagine how we serve our customers and businesses who have come to love the products and services we build. Team Description: The Intelligent Foundations and Experiences (IFX) team is at the center of bringing our vision for AI at Capital One to life. We work hand-in-hand with our partners across the company to advance the state of the art in science and AI engineering, and we build and deploy proprietary solutions that are central to our business and deliver value to millions of customers. Our AI models and platforms empower teams across Capital One to enhance their products with the transformative power of AI, in responsible and scalable ways for the highest leverage impact. In this role, you will: Partner with a cross-functional team of engineers, research scientists, technical program managers, and product managers to deliver AI-powered products that change how our associates work and how our customers interact with Capital One. Design, develop, test, deploy, and support AI software components including foundation model training, large language model inference, similarity search, guardrails, model evaluation, experimentation, governance, and observability, etc. Leverage a broad stack of Open Source and SaaS AI technologies such as AWS Ultraclusters, Huggingface, VectorDBs, Nemo Guardrails, PyTorch, and more. Invent and introduce state-of-the-art LLM optimization techniques to improve the performance — scalability, cost, latency, throughput — of large scale production AI systems. Contribute to the technical vision and the long term roadmap of foundational AI systems at Capital One. The Ideal Candidate: You love to build systems, take pride in the quality of your work, and also share our passion to do the right thing. You want to work on problems that will help change banking for good. Passion for staying abreast of the latest research, and an ability to intuitively understand scientific publications and judiciously apply novel techniques in production. You adapt quickly and thrive on bringing clarity to big, undefined problems. You love asking questions and digging deep to uncover the root of problems and can articulate your findings concisely with clarity. You have the courage to share new ideas even when they are unproven. You are deeply Technical. You possess a strong foundation in engineering and mathematics, and your expertise in hardware, software, and AI enable you to see and exploit optimization opportunities that others miss. You are a resilient trail blazer who can forge new paths to achieve business goals when the route is unknown. Basic Qualifications: Bachelor's degree in Computer Science, AI, Electrical Engineering, Computer Engineering, or related fields plus at least 4 years of experience developing AI and ML algorithms or technologies, or a Master's degree in Computer Science, AI, Electrical Engineering, Computer Engineering, or related fields plus at least 2 years of experience developing AI and ML algorithms or technologies At least 4 years of experience programming with Python, Go, Scala, or Java Preferred Qualifications: 6 years of experience deploying scalable and responsible AI solutions on cloud platforms (e.g. AWS, Google Cloud, Azure, or equivalent private cloud) Experience designing, developing, delivering, and supporting AI services Experience developing AI and ML algorithms or technologies (e.g. LLM Inference, Similarity Search and VectorDBs, Guardrails, Memory) using Python, C++, C#, Java, or Golang Experience developing and applying state-of-the-art techniques for optimizing training and inference software to improve hardware utilization, latency, throughput, and cost Passion for staying abreast of the latest AI research and AI systems, and judiciously apply novel techniques in production Capital One will consider sponsoring a new qualified applicant for employment authorization for this position. The minimum and maximum full-time annual salaries for this role are listed below, by location. Please note that this salary information is solely for candidates hired to perform work within one of these locations, and refers to the amount Capital One is willing to pay at the time of this posting. Salaries for part-time roles will be prorated based upon the agreed upon number of hours to be regularly worked. Cambridge, MA: $197,300 - $225,100 for Lead AI Engineer McLean, VA: $197,300 - $225,100 for Lead AI Engineer New York, NY: $215,200 - $245,600 for Lead AI Engineer San Jose, CA: $215,200 - $245,600 for Lead AI Engineer Candidates hired to work in other locations will be subject to the pay range associated with that location, and the actual annualized salary amount offered to any candidate at the time of hire will be reflected solely in the candidate’s offer letter. This role is also eligible to earn performance based incentive compensation, which may include cash bonus(es) and/or long term incentives (LTI). Incentives could be discretionary or non discretionary depending on the plan. Capital One offers a comprehensive, competitive, and inclusive set of health, financial and other benefits that support your total well-being. Learn more at the Capital One Careers website . Eligibility varies based on full or part-time status, exempt or non-exempt status, and management level. This role is expected to accept applications for a minimum of 5 business days.No agencies please. Capital One is an equal opportunity employer (EOE, including disability/vet) committed to non-discrimination in compliance with applicable federal, state, and local laws. Capital One promotes a drug-free workplace. Capital One will consider for employment qualified applicants with a criminal history in a manner consistent with the requirements of applicable laws regarding criminal background inquiries, including, to the extent applicable, Article 23-A of the New York Correction Law; San Francisco, California Police Code Article 49, Sections 4901-4920; New York City’s Fair Chance Act; Philadelphia’s Fair Criminal Records Screening Act; and other applicable federal, state, and local laws and regulations regarding criminal background inquiries. If you have visited our website in search of information on employment opportunities or to apply for a position, and you require an accommodation, please contact Capital One Recruiting at 1-800-304-9102 or via email at . All information you provide will be kept confidential and will be used only to the extent required to provide needed reasonable accommodations. For technical support or questions about Capital One's recruiting process, please send an email to Capital One does not provide, endorse nor guarantee and is not liable for third-party products, services, educational tools or other information available through this site. Capital One Financial is made up of several different entities. Please note that any position posted in Canada is for Capital One Canada, any position posted in the United Kingdom is for Capital One Europe and any position posted in the Philippines is for Capital One Philippines Service Corp. (COPSSC).

Prior experience leading engineering development efforts or mentoring engineers. PhD in Electrical Engineering. The Electromagnetic Engineer will lead the design, analysis, and optimization of magnetic structures and resonant systems for near-field wireless power transfer applications.

Placed by VanSpeag Group LLC | Client: Confidential – High-Tech Engineering with base offices in New York City.Role: Electrical Engineer – DC/DC High Frequency Power Electronics & Wireless Power Transfer.Discipline: Power Electronics / Mixed-Signal Hardware Design / Wireless Power Transfer (W

Electrical Engineer to lead the design of large-scale electrical systems on signature commercial and Highrise projects, mentor a talented team of engineers, and serve as a trusted technical advisor to clients, architects, and project stakeholders. Lead the electrical engineering design effort on com

A leading technology company seeks a Principal Systems Electrical Engineer in Secaucus, NJ. This role involves leading system architecture designs and mentoring engineers in high-speed PCB design. The ideal candidate has 12+ years of experience in the field and a Bachelor’s degree in Electrical En

Bachelor’s degree from accredited university in Mechanical, Plumbing or Electrical discipline is required. As an Electrical Engineer IV, you will be responsible for providing trade-specific system design: layout, calculations (utilizing appropriate software), and coordination with the designs of o

A leading technology infrastructure company is seeking a Principal Electrical Engineer. The ideal candidate has a Bachelor's Degree in Electrical Engineering and over 12 years of relevant experience.

Data Center Controls Engineer (Remote/Travel) This Jobot Job is hosted by: Tony Barhoum Are you a fit? Easy Apply now by clicking the "Apply" button and sending us your resume. Salary: $110,000 - $180,000 per year A bit about us: We are industry leading Engineering Firm providing engineering leadership and innovative solutions for complex building, energy, and utility projects. From enhanced patient outcomes to climate-sensitive energy supply, we deliver high-performance engineered systems that positively impact society and help improve the world. We serve our clients and support our employees with integrity and humility, displaying project leadership excellence unique to our Firm. We develop creative and effective solutions to meet our employee’s and clients’ needs, creating a culture that acknowledges achievements and encourages professional development while providing challenging project work and career Advancement. With over 20 locations nationwide, our Team is committed to nurturing a culture of inclusion by building a diverse team and investing in equity across our organization. We believe diverse teams lead to better ideas, greater innovation, and more success in our careers, and with our clients. Our goal is to provide an equal representation of varying perspectives in decision-making positions at all levels of our organization, actively working to meet the needs of our candidates and team members. Why join us? Benefits: • Competitive Compensation, • Competitive Bonus and Stock Options Package, • Complete Benefits Package, • Flexible Schedule, • H1B Transfer, • Accelerated Career Growth Job Details Data Center Controls Engineer (Remote with Travel) We are seeking a Data Center Controls Engineer to support mission-critical facilities projects across a national portfolio. This role focuses on the design, implementation, and optimization of control systems for data center infrastructure, including mechanical and electrical systems. The position is primarily remote with periodic travel to client sites for commissioning, assessments, and stakeholder coordination. Our firm delivers engineering consulting services across energy, infrastructure, and building systems, with a strong emphasis on controls, automation, and performance optimization. – Compensation – $110-$180K+ Depending years of Experience, Certifications, etc. DUTIES – Design, review, and optimize Building Management Systems (BMS) and Electrical Power Monitoring Systems (EPMS) for data centers – Develop and validate sequence of operations (SOO) for HVAC and critical power systems – Support commissioning, troubleshooting, and performance tuning of controls systems – Collaborate with mechanical, electrical, and construction teams on new builds and retrofits – Analyze system performance and recommend improvements for efficiency, reliability, and uptime – Provide technical support and interface with clients, vendors, and integrators. – Data center controls roles commonly involve BMS/EPMS oversight, troubleshooting, and coordination across HVAC and power systems. QUALIFICATIONS – Bachelor’s degree in Mechanical Engineering, Electrical Engineering, or related field – 2–7+ years of experience in controls, BAS/BMS, or mission-critical facilities (data center experience a plus) – Working knowledge of HVAC systems, power systems, and automation controls – Experience with one or more: · BACnet, Modbus, or similar protocols · BMS platforms (e.g., Tridium Niagara, Siemens, Schneider, Johnson Controls) · SCADA or industrial controls environments PREFERRED, NOT REQUIRED – Experience with data center infrastructure (chillers, CRAH/CRAC, UPS, generators, switchgear) – Certifications such as: · Certified Energy Manager (CEM) · Niagara Certification (Tridium) · PE (Professional Engineer) or EIT · Certified Automation Professional (CAP) – Familiarity with commissioning or retro-commissioning processes ADDITIONAL DETAILS – Remote-first role with ~20–40% travel (project dependent) – Opportunity to work on high-profile, mission-critical infrastructure projects – Collaborative, client-facing consulting environment with growth potential Interested in hearing more? Easy Apply now by clicking the "Apply" button. Jobot is an Equal Opportunity Employer. We provide an inclusive work environment that celebrates diversity and all qualified candidates receive consideration for employment without regard to race, color, sex, sexual orientation, gender identity, religion, national origin, age (40 and over), disability, military status, genetic information or any other basis protected by applicable federal, state, or local laws. Jobot also prohibits harassment of applicants or employees based on any of these protected categories. It is Jobot’s policy to comply with all applicable federal, state and local laws respecting consideration of unemployment status in making hiring decisions. Sometimes Jobot is required to perform background checks with your authorization. Jobot will consider qualified candidates with criminal histories in a manner consistent with any applicable federal, state, or local law regarding criminal backgrounds, including but not limited to the Los Angeles Fair Chance Initiative for Hiring and the San Francisco Fair Chance Ordinance. Information collected and processed as part of your Jobot candidate profile, and any job applications, resumes, or other information you choose to submit is subject to Jobot's Privacy Policy, as well as the Jobot California Worker Privacy Notice and Jobot Notice Regarding Automated Employment Decision Tools which are available at jobot.com/legal. By applying for this job, you agree to receive calls, AI-generated calls, text messages, or emails from Jobot, and/or its agents and contracted partners. Frequency varies for text messages. Message and data rates may apply. Carriers are not liable for delayed or undelivered messages. You can reply STOP to cancel and HELP for help. You can access our privacy policy here: jobot.com/privacy-policy

Electrical Engineer PE (Mission Critical) - NYC/Hybrid This Jobot Job is hosted by: Tony Barhoum Are you a fit? Easy Apply now by clicking the "Apply" button and sending us your resume. Salary: $125,000 - $165,000 per year A bit about us: Award-Winning Engineering Consulting Firm specializing in Design/Build Mission Critical Projects, Hyperscale Data Centers, and Healthcare Facilities. For over 40 years we’ve built a team of innovative Engineers & Architects devoted to principles of design excellence and exceptional service. Our leadership remains actively involved in every project, guiding planning, design, management, and implementation. Over the years, our practice has expanded to include a diverse, multidisciplinary staff with expertise across a wide range of project types. This blend of technical depth and industry diversity enables an innovative, holistic approach to each engagement. With experience spanning Mission Critical Facilities, Data Center, Healthcare, and Research & Technology, we are constantly evolving with the latest advancements to deliver forward-thinking solutions and a strong commitment to client services. Why join us? We can offer you the opportunity to work on State-of-the-Art Projects including Hyper Scale Data Centers • Competitive Base Salary, • Competitive Bonus, • 401K Matching Contribution Benefits Package, • Comprehensive Benefits Package (Health/Dental/Vision), • Accelerated Career Growth & Professional Development, • Flexible Work Schedule and Paid Time Off Job Details Electrical Engineer PE – Mission Critical Data Centers – REMOTE We are seeking a Mid to Senior Level Electrical Engineer PE with 6-10 years of experience in Electrical Building / Power Systems Design of Mission Critical Data Centers Projects and Critical Infrastructure. QUALIFICATIONS • Bachelor’s Degree in Electrical Engineering from an ABET-accredited college or university., • 5-10+ years of experience designing power systems for mission critical projects, data centers, or healthcare facilities., • Advanced proficiency with SKM Power Tools (DAPPER, CAPTOR, Arc Flash)., • Strong understanding of NEC, NFPA 70E, IEEE 1584., • Experience with UPS systems, generator paralleling, STS/ATS equipment, and redundant distribution architectures., • PE License Desired, • Demonstrated experience designing electrical power systems on technically complex projects., • Proficient in design software such as Revit, AutoCAD, and related tools., • Strong understanding of all A/E design disciplines and cross-disciplinary project coordination., • Ability to effectively communicate and interface with architects, clients, engineers, and trade personnel., • Skilled in presenting design options and technical recommendations to clients and internal teams., • Detail-oriented with strong time-management and budgeting skills to meet project schedules and deliverables., • Proven ability to work productively within a team environment on multiple design and construction projects., • Field experience with a solid understanding of construction methods, systems, and best practices., • Design electrical power systems for mission critical environments, data centers, and healthcare facilities., • Develop and maintain detailed electrical system models of Medium Voltage and Low Voltage distribution system in SKM, consisting of UPS systems, generators, paralleling gear, PDUs, RPPs, and dual fed distribution., • Perform short circuit studies to verify equipment withstand ratings and identify overstressed equipment., • Develop protective device coordination studies., • Conduct arc flash hazard analyses and prepare arc flash labels aligned with NFPA 70E, IEEE 1584, and owner specific safety programs., • Evaluate system behavior under normal, emergency, and maintenance operating modes., • Prepare detailed engineering reports with clear recommendations for mitigation, labeling, and operational safety., • Review one-line diagrams, equipment submittals, and as built documentation to ensure accurate system modeling., • Collaborate with design engineers, commissioning teams, and facility operators to gather data and validate study assumptions and maintain up-to-date SKM model and reports.., • Provide technical guidance during design, commissioning, and troubleshooting of power distribution systems in live or planned data center environments., • $125K - $165K + Depending on Experience., • Annual Performance Bonuses, • Full-Time / Direct Hire position with a Comprehensive Benefits Package., • Excellent opportunity for career advancement within a growing mission-critical engineering team. Interested in hearing more? Easy Apply now by clicking the "Apply" button. Jobot is an Equal Opportunity Employer. We provide an inclusive work environment that celebrates diversity and all qualified candidates receive consideration for employment without regard to race, color, sex, sexual orientation, gender identity, religion, national origin, age (40 and over), disability, military status, genetic information or any other basis protected by applicable federal, state, or local laws. Jobot also prohibits harassment of applicants or employees based on any of these protected categories. It is Jobot’s policy to comply with all applicable federal, state and local laws respecting consideration of unemployment status in making hiring decisions. Sometimes Jobot is required to perform background checks with your authorization. Jobot will consider qualified candidates with criminal histories in a manner consistent with any applicable federal, state, or local law regarding criminal backgrounds, including but not limited to the Los Angeles Fair Chance Initiative for Hiring and the San Francisco Fair Chance Ordinance. Information collected and processed as part of your Jobot candidate profile, and any job applications, resumes, or other information you choose to submit is subject to Jobot's Privacy Policy, as well as the Jobot California Worker Privacy Notice and Jobot Notice Regarding Automated Employment Decision Tools which are available at jobot.com/legal. By applying for this job, you agree to receive calls, AI-generated calls, text messages, or emails from Jobot, and/or its agents and contracted partners. Frequency varies for text messages. Message and data rates may apply. Carriers are not liable for delayed or undelivered messages. You can reply STOP to cancel and HELP for help. You can access our privacy policy here: jobot.com/privacy-policy

Electrical Commissioning Project Engineer - NYC - Remote This Jobot Job is hosted by: Tony Barhoum Are you a fit? Easy Apply now by clicking the "Apply" button and sending us your resume. Salary: $95,000 - $135,000 per year A bit about us: We are an international conglomerate, with 10k+ employees, we are growing our Energy practice throughout the US and beyond! Our practice is built on the foundation that our people mean more to us than anything else! What that means for you, is that we expect you to enjoy a work life balance that promotes personal health, well being and family life! You will be part of a close-knit team of creative professionals and will be provided opportunities for continued growth, development, and recognition. Why join us? • Competitive Base Salary!, • Competitive Bonus Package!, • Overtime Pay, • 401K Matching Contribution, • Flexible/Unlimited PTO, • Complete Benefits Package!, • Flexible Work Schedules!, • Accelerated Career Growth!, • Fun Company Activities! Job Details Electrical Commissioning Engineer (Data Centers) - Local/Remote Seeking an Electrical Commissioning Project Engineer to join our team. Successful candidates will have experience in Electrical Systems & Equipment with a focus in Data Centers and Mission Critical Facilities; experience and an understanding of Building MEP Systems Design, Construction, and Commissioning of Critical Systems ranging in size, rating, and complexity; Commissioning, Testing and Troubleshooting of Electrical Systems and related controls. You will be responsible for reviewing project information, executing daily field activities, maintaining project documentation, assisting the Project Manager, and providing guidance to junior engineers. • Commission electrical distribution equipment and related controls, primarily in data center environments, including HV and MV primary distribution, • Review system designs for compliance with client facility goals, • Prepare plans and procedures for execution of the commissioning process, • Conduct commissioning activities from the Design Phase into the Occupation Phase, in accordance with client requirements, • Attend factory testing of equipment and document procedures and results, • Conduct physical testing of electrical equipment and measure results using test instrumentation, • Fully document all field procedures, including results, issues, and observations using online applications, • Report on electrical system performance and make technical recommendations on issues, • Work with project teams to coordinate and execute field activities., • Review and comment on project documentation, plans, and schedules, • Submit and maintain daily commissioning reports as required, • Assist in the training of junior engineers, • Respond to customer inquiries in a manner that exceeds the customer’s expectations, • Ensure compliance with company, client, and project safety requirements, • Knowledgeable with common mechanical, and controls-related building equipment, including: Engine generators / Uninterruptible power supplies & battery systems / Medium and low-voltage electrical switchgear/ PLC controls and sequences of operations / Automatic transfer switches / Static transfer switches / Power distribution units / Busways • BSc/MSc in Electrical Engineering, • 2 to 4+ yrs of experience Commissioning Electrical Systems for Data Center projects, or relevant and applicable industry experience. • Experience in Mission Critical facility commissioning essential, • Organized, detail-oriented, analytical, proactive, problem solver, • Good communication and relationship skills, • Effective written and verbal communication skills, • Ability to manage multiple tasks simultaneously and work with limited supervision, • Knowledge & experience with ASHRAE commissioning guidelines preferred, • Distributed control system experience a plus, • Reasonable understanding of Building Management Systems, • Deep understanding and application of test instrumentation, • Team player and a “client-first” mentality. Interested in hearing more? Easy Apply now by clicking the "Apply" button. Jobot is an Equal Opportunity Employer. We provide an inclusive work environment that celebrates diversity and all qualified candidates receive consideration for employment without regard to race, color, sex, sexual orientation, gender identity, religion, national origin, age (40 and over), disability, military status, genetic information or any other basis protected by applicable federal, state, or local laws. Jobot also prohibits harassment of applicants or employees based on any of these protected categories. It is Jobot’s policy to comply with all applicable federal, state and local laws respecting consideration of unemployment status in making hiring decisions. Sometimes Jobot is required to perform background checks with your authorization. Jobot will consider qualified candidates with criminal histories in a manner consistent with any applicable federal, state, or local law regarding criminal backgrounds, including but not limited to the Los Angeles Fair Chance Initiative for Hiring and the San Francisco Fair Chance Ordinance. Information collected and processed as part of your Jobot candidate profile, and any job applications, resumes, or other information you choose to submit is subject to Jobot's Privacy Policy, as well as the Jobot California Worker Privacy Notice and Jobot Notice Regarding Automated Employment Decision Tools which are available at jobot.com/legal. By applying for this job, you agree to receive calls, AI-generated calls, text messages, or emails from Jobot, and/or its agents and contracted partners. Frequency varies for text messages. Message and data rates may apply. Carriers are not liable for delayed or undelivered messages. You can reply STOP to cancel and HELP for help. You can access our privacy policy here: jobot.com/privacy-policy

A technology solutions provider in Secaucus is looking for a Senior Staff Systems Electrical Engineer to lead the design and debugging of cloud compute server systems. The ideal candidate will have over 12 years of experience in PCB design and a Bachelor's in Electrical Engineering.

Job Description Senior Electrical Engineer – Project Manager Watch your work come to life in landmark projects around the world when you partner with Syska Hennessy Group! As a global leader in consulting, engineering, and commissioning services, we specialize in MEP, information and communication technology, architectural lighting, vertical transportation, and commissioning. We are seeking a Senior Electrical Engineer - Project Manager to join our team in New York, NY. Our team is looking for a candidate with significant electrical design experience, specifically with healthcare or Aviation/Transportation or Critical Facilities projects and 3 years of Project Management experience at a minimum. This candidate should also have the desire to help grow our team and manage and develop our young mechanical engineers. Our dynamic work environment provides the optimal setting to take your engineering career to the next level. From our supportive culture, diverse workforce, and competitive compensation to our flexible work schedule Monday to Thursday in the office for 9 hours and Friday for 4 hours remotely at home and fun social events, it is everything you will need for an exciting, challenging, and rewarding career. Job Responsibilities As a Senior Electrical Engineer-Project Manager, you will be responsible for representing the Firm in all interactions with clients, contractors, architects, and other project team members. You will be responsible for designing large projects, preparing reports and specifications, and providing a high level of technical leadership. Additional responsibilities include: • Establishing design standards, specifications, and criteria for projects, • Supervising preparation of reports and analysis of system options and building conditions, • Maintaining interdisciplinary coordination with other trades/projects consultants, • Monitoring all correspondence between staff, clients, contractors, owners, etc., • Supervising construction administrative duties such as field reports, responses to RFIs, processing bulletins and addenda, etc., • Periodic objective and comprehensive employee evaluations, • Participate in and contribute to business unit Technical Leadership Committee, • Bachelor's degree in Electrical engineering from an Accredited Institution, • 7 - 10 years' experience working in a consulting firm, this is a Senior level role that requires a background in the MEP Engineering Industry, • 3 years of supervisory experience, • Hands-on design and CAD/REVIT experience, required, as you will have a very strong technical role As an employee with Syska Hennessy Group, you will be part of a global firm with an amazing history! We are committed to being the best, to advancing engineering design practice, and to supporting our clients with integrity. To make all of that happen, we rely on the talent, drive, enthusiasm, and the total job satisfaction of the great people who work here. As a member of our highly collaborative team, we provide you with a flexible benefits package that reflects our respect for your workplace contributions, professional goals, and personal priorities. The personal benefits program at Syska Hennessy Group includes: • Robust, comprehensive medical, dental, vision, life insurance and supplemental benefit plans, • 401(k) plan with a generous employer matching program, • Training and professional development courses, • Professional development incentive bonuses, • Dynamic Employee Resource Groups, • Competitive Paid Time Off (PTO) policy, • Transit/parking employer stipend Syska Hennessy Group | Integrating the best minds and technology to help clients create exceptional environments. The salary range listed below is for this particular job posting. Actual pay range for candidates will be commensurate with candidate's experience, skillsets and competencies and may differ based on the cost of labor in their particular location. New York Pay Range$104,479—$156,718 USD

Job Description Join JB&B and shape the future of the built environment! Founded in 1915, Jaros, Baum & Bolles has been a pillar of engineering innovation in New York City for over a century. Specializing in mechanical, electrical, plumbing (MEP), JB&B has contributed to some of the most iconic buildings. In October 2025, JB&B joined forces with Trinity Consultants, a global consulting firm focused on the natural and built environments. JB&B now operates within Trinity’s Built Environment division, combining its deep expertise in high-performance building systems with Trinity’s strengths in acoustic design, facility operations, commissioning, and technology strategy. This strategic merger expands JB&B’s capabilities and offers employees: • Access to a broader portfolio of international projects and clients, • Enhanced career mobility across Trinity’s global network We are seeking a technically skilled and experienced Electrical Engineer - with Data Center experience to join our Electrical Department either in New York City or remote as an Associate. This is an exciting opportunity for an experienced engineer with strong technical, coordination, and leadership skills to contribute to high-impact projects and client success. As an Electrical Engineer in the Associate role, you'll play a key role in managing and executing electrical engineering projects from design through completion. You will collaborate across disciplines, communicate directly with clients, and help ensure that both technical excellence and project financial goals are achieved. Key Responsibilities • Works with their Department Leader (i.e., Director, Associate Partner, or Partner) to develop conceptual design for projects and guides their team through project completion., • Acts as the day-to-day Client point of contact on their projects, • Manages and reviews all project- related documents and ensures timely and accurate implementation, • Responsible for project deliverables both technically and functionally., • Presents and explains project designs confidently at internal and external meetings., • Coordinates and updates the project team regularly to meet design expectations and deadlines., • Initiates and manages design changes, proposals, and approvals., • Successfully executes large/complex Data Center projects from concept to completion., • Utilizes staffing and project resources effectively: delegates projects thoughtfully to avoid work overload., • Financial Management and Business Development, • Builds and maintains quality relationships with Clients and industry contacts.Minimum Qualifications, • Bachelor's degree in Electrical Engineering, • 7-12 years of experience, • Excellent oral and written communication skills, • Proficient in all design calculations and software tools (e.g., Revit and AutoCAD) applicable to their discipline, • Strong understanding of trade-specific scope of project, trade-related codes, and the required coordination with other trades, • Strong understanding of documentation requirements and content for each deliverable phase (e.g., SD, DD, CD and specifications)Why Work at JB&B?, • Legacy + Innovation: Our company blends a rich history with forward-thinking design, including smart building systems and deep carbon reduction strategies., • Collaborative Culture: With over 400 professionals, our company fosters mentorship, teamwork, and continuous learning., • Global Impact: Now part of Trinity, our company offers opportunities to work on transformative projects across commercial, healthcare, aviation, life sciences, and data center sectors., • Multiple office locations: New York, Boston and Philadelphia. What We Offer, • Hybrid workplace offering the flexibility to work both from home and the office, • Comprehensive benefits package including 401k employer match and stock options, • Paid time off (PTO), volunteer program and employee resource groups Jaros, Baum & Bolles is an equal opportunity employer. All qualified candidates will receive consideration for employment without regard to race, ethnicity, color, religion, sex, sexual orientation, gender identity, national origin, age, disability, marital status, military veteran status, unemployment status, or any other status protected by law. Powered by JazzHR qPgM5KQOxB

Job DescriptionDescription: KSE is a mid-size construction management and engineering firm ranking in the ENR Top 100 for CM and ENR Top 500 for design services. With seven offices across four states (NY, NJ, PA and CT), the firm has been providing transportation and public infrastructure construction services for more than three and half decades. KSE offers a full range of employee benefits, including medical, dental and vision insurances, a 401(k) plan, paid time off, Flexible Spending Accounts (FSAs), long- and short-term disabilities, and term life insurance. KSE is an equal opportunity employer. We celebrate diversity and are committed to creating an inclusive environment for all employees. Position: Geotechnical Field Engineer Reports: Geotechnical Manager Technical Responsibilities: • Perform geotechnical field investigations, explorations, geologic reconnaissance, and site mapping., • Prepare geotechnical field boring logs, soil and rock sampling, and field permeability testing., • Support geotechnical laboratory testing and analysis., • Perform basic engineering calculations, data interpretation, and technical analysis., • Assist in preparing geotechnical reports and project documentation., • Coordinate with subcontractors in the field to complete scope-of-work activities., • Travel to field assignments throughout NJ, NY, PA, and CT; occasional overnight stays may be required., • 0 to 3 years of experience as a Geotechnical Field Engineer., • Bachelor’s degree in civil engineering, Geotechnical Engineering, Geology, or a related field, • Green Infrastructure project experience and permeability testing is a plus, • Previous internship experience a plus., • Engineer-in-Training (EIT) certification – plus., • OSHA 10-hr or 40-hr HAZWOPER training – plus., • Experience with RSLog or gINT– plus., • Previous internship or field experience in geotechnical engineering – plus., • Ability to work independently and as part of a team., • Reliable transportation to travel between job sites and office/lab (mileage, tolls & parking reimbursed). Physical & Work Environment Requirements: • Ability to sit, stand, walk, climb, kneel, crouch, crawl, grasp, reach, push/pull, and perform repetitive motions as needed for field tasks., • Frequently lift and/or move up to 35 lbs. occasionally up to 75 lbs., • Visual acuity required for data analysis, computer use, reading, and site inspections., • Outdoor work performed 50–90% of the time, often on uneven terrain and in varying weather conditions., • Exposure to outdoor elements including insects, plants, animals, and environmental temperatures typical of the region., • Occasional exposure to hazards such as moving mechanical parts, vehicles, electrical systems, heights, scaffolding, or chemicals., • Daily travel ranging from 1 to 3 hours depending on project location; overnight travel may be required. Schedule: • Sites may require commute as long as 1 hour to 3 hours of driving. Sometimes overnight stay for the duration of the project., • The field inspections/visits are dictated by construction schedules and could include early morning or late evening timing at the project site., • Ability and willingness to work alternate hours, to include overnight hours as required by the project specific requirements., • The employee is subject to both inside and outside environmental and climate conditions, • The employee is expected to perform approximately 50 to 90 percent of their work week outdoors with the remaining time in the office. Outdoor work frequently includes walking on uneven surfaces in all types of weather conditions and may have exposure to animals, insects, plants, etc., • The employee is subject to hazards such as proximity to moving mechanical parts, moving vehicles, electrical current, working on scaffolding and high places, exposure to various heat/cold temperatures typical of the region or exposure to chemicals., • Must have a reliable form of transportation to travel between job sites and the office/lab with equipment and/or samples. Miles, tolls, and parking reimbursed. What We Offer: • In-house Safety Training and free PPE to field staff., • Dedicated mentorship program., • Learning and Development initiatives., • Purpose driven opportunity to work on exciting infrastructure and sustainability projects building America., • Inclusive culture celebrating diversity., • Health Insurance Benefits with HSA option., • Disability, Life Insurance, and 401K Retirement Accounts., • Paid Vacation and Sick Time, Paid Holidays., • Tuition Reimbursement., • Career Advancements., • Company Holiday Party, Company Summer Outings, Friday Breakfast, Monthly Heritage Celebration Lunch, Lunch & Learn Programs. Pay Transparency: Base salary is $55,000 to $70,000 per year. Base salary is only one part of KS Engineers total compensation, which includes an annual discretionary bonus. KS Engineers, P.C. is an EOE/AA/VEV/Disabled Employer. KSE will not discriminate based on race, color, religion, creed, sex, national origin, marital status, age, disability, veteran status, citizenship status, or other status protected by law.

AG Consulting Engineering, PC (AG) a design, engineering and construction management firm headquartered in Manhattan, New York is looking for several Electrical Design Engineers to support a variety of infrastructure projects in New York City.Employees at AG embrace ownership of each project, bringi

Participate in the design and development of electrical construction documents, including layouts, details, and specifications.Engineer complete building systems—lighting, power distribution, and specialty electrical systems—across a variety of project types.Collaborate with architects, interior

AG Consulting Engineering, PC (AG) a design, engineering and construction management firm headquartered in Manhattan, New York is looking for several Electrical Design Engineers to support a variety of infrastructure projects in New York City.Employees at AG embrace ownership of each project, bringi

The Role This role calls for a professional MEP Electrical design engineer to help lead the company's design efforts and project management on their wide array of projects which include government, education, mission critical healthcare, datacenters, commercial and residential buildings. Responsibil

Candidates should possess an accredited electrical engineering degree and 3-10 years of experience in the MEP consulting industry. A growing MEP consulting firm is seeking a Mid-Senior Electrical Engineer to lead design efforts and project management.

Join to apply for the Electrical Engineer III role at Walbridge 4 days ago Be among the first 25 applicants Carlson Design Group is actively seeking an experienced and registered Electrical Engineer to join our team and lead projects for our expanding business. Technical Expertise: Provide technical

A tech-driven company in New York is looking for an AI-focused electrical engineer with over 2 years of experience in commercial or industrial design. Candidates should have QA/QC expertise and clear communication skills.

A leading technology company is seeking a Principal R&D/Product Development Engineer to lead electrical design in high-speed connectivity products. This remote role requires significant experience in signal integrity and electrical design, along with a solid understanding of electromagnetic theory.

Job Description: Job Title: Systems Power Engineer (Contract-Position) Location: Austin, TX (onsite) Seeking an enthusiastic electrical engineer to join our Power and Performance Customer Attainment team and work on best-in-class products. Experience with leading PCB technology and electrical design

What You'll Do • Translate electrical standards and NEC codes into structured patterns for AI execution • Collaborate on feature testing and weekly product releases meeting professional standards • Lead technical delivery of AI-generated reviews to enterprise clients • Conduct technical