Electrical design engineer jobs in Round Rock, TexasCreate job alerts

Nuclear Design Engineer with significant focus on nuclear pressure transmitter products. Work Location: Round Rock, TX Rate: Not Defined / need Candidate’s requested rate Per diem: $178.00/day (7 days per week) Mob / Demob: $500.00/each way Hours: Full Time (40 hrs / wk) The required qualifications are as follows: Position Details: Design, development, and support of sensor products with significant focus on nuclear pressure transmitter products. Purpose of Position: This position will be responsible for the design, development and support of sensor products with significant focus on nuclear pressure transmitter products. This includes design engineering, AutoCAD, SolidWorks 3D modeling, drawing creation, component specification and supplier qualification, environmental analysis, qualification testing, sustaining engineering, manufacturing support and project management. Key Responsibilities: • Complete assigned projects in accordance with requirements and within schedule and budget limitations, • Domain knowledge application is typically 80% Mechanical Engineering and Manufacturing Process; 20% Electrical,, • Quality, Materials, • Research and development of pressure sensor elements and components, • Product design, analysis, and documentation, • Specification reviews and configuration management, • Project management, • Create and maintain inspection, manufacturing, and testing procedures, • Production work orders and work instructions, • Sustaining engineering, • Maintaining supply of qualified components, • ‘Pre-emptive’ management of risks, • Design Reviews and problem solving, • Product Verification & Validation and acceptance, • Product and component qualification testing, • Support manufacturing during production and testing, • Interact with: Customers, Suppliers, Engineers, Operations and Materials, Quality Assurance, Management at all levels, • Other duties as assigned Required: • BSME from an ABET accredited University; or, equivalent Engineering degree in adjacent discipline (e.g. Electrical,, • Aerospace, Nuclear, Materials) with requisite design skills and experience, • Five (5) or more years of engineering experience including pressure sensors and transmitters, • Experience with pressure transmitter calibration, bench testing, component level troubleshooting, root cause analysis, • Working knowledge of manufacturing processes, • Design for Manufacturability (DFM), • GD&T per ASME Y14.5M, • Experience and ability to work in a regulated industry, • Good verbal and written communication including technical writing (English), • SolidWorks, AutoCAD or similar MCAD, MS Office Considered a plus: • Expertise in pressure sensor technologies, • Experience in Aerospace, Military, Nuclear, or Environmental Qualifications, • Familiarity with IEEE 323 & 344 and RCC standards, ASME Codes, and nuclear quality standards, • Solid modeling and Finite Element Analysis (FEA), • Experience in computer integrated manufacturing CAD/CAM/CMM, • Programming in Excel, Visual Basic, MATLAB, LabVIEW Physical Requirements: Must be capable of climbing, walking, kneeling, bending, and lifting as part of daily job responsibilities. Ability to lift a minimum of 35 – 60 lbs.

About the Company: Translarity is a growing leader in the semiconductor test industry, delivering innovative wafer test solutions that power the technology shaping our digital world. Headquartered in Silicon Valley, with operations in California, Texas, the Philippines, Taiwan, and Vietnam, we serve leading semiconductor manufacturers and their global supply chain partners. Our mission is to revolutionize semiconductor wafer testing through innovation and excellence. With over 100 patents and a focus on full-wafer testing, we provide solutions that combine low cost, high performance, and fast cycle times using cutting-edge MEMS probe technology. Join our dynamic and growing team as we continue to address the evolving needs of the semiconductor industry. What is a Probe Card? A probe card is a critical component in semiconductor testing, acting as the interface between automated test equipment and the semiconductor wafer. These assemblies often include complex multi-layer PCBs with tens of thousands of routed traces and thousands of discrete components, supporting mixed-signal, high-speed, RF, and power-delivery paths. Precision and electrical integrity are essential for accurate wafer-level testing. Position Purpose: We are seeking a Test Design Engineer to play a key role in electrical problem solving, troubleshooting, and continuous improvement for advanced probe card technologies at our Hutto facility. This is a hands-on, production-facing engineering role focused on resolving complex electrical issues, improving yield and reliability, and feeding lessons learned back into design, manufacturing, and test processes. This role is suited for an engineer who is comfortable working directly with production, test, and rework teams, taking ownership of difficult electrical issues, and driving systematic improvements rather than only supporting individual failures. Responsibilities: • Lead design of test hardware, including PCB design, circuit design and FPGA programming, • Lead electrical troubleshooting of probe cards and subassemblies, including mixed-signal, high-speed, RF, and power delivery paths., • Write test vectors and design test programs for different platforms, • Own complex, cross-functional debug efforts involving dense, multi-layer PCBs with thousands of components and extremely tight tolerances., • Analyze failing electrical test data to identify root causes such as opens, shorts, leakage, impedance drift, signal integrity issues, crosstalk, grounding problems, or component failures., • Perform and interpret measurements using oscilloscopes, VNAs, TDR, LCR meters, curve tracers, and automated test equipment., • Drive structured root-cause analysis (RCA) and corrective actions, ensuring issues are fully understood and addressed, not just worked around., • Support and guide technicians during debug, rework, and retest activities, setting best practices and ensuring consistent execution., • Participate in RMA evaluations, customer-return analysis, and field failure investigations, identifying systemic trends and improvement actions., • Develop and maintain failure summaries, yield analyses, corrective action recommendations, and production/test documentation., • Lead or contribute to continuous improvement initiatives focused on electrical margins, test robustness, production yield, and overall product quality., • Serve as a technical escalation point for electrical issues encountered in production and test. Skills and Qualifications: • Strong foundation in electrical engineering design, including analog, digital, mixed-signal, and power circuits. Must be able to both design test circuits and understand their behavior., • Hands-on knowledge of Labview., • Solid understanding of PCB design and stack-ups, routing behavior, parasitics, and how electrical characteristics evolve in dense, high-complexity assemblies., • Demonstrated ability to trace signals, interpret schematics, and reason through complex component interactions on large multi-layer boards., • Hands-on expertise with electrical lab equipment such as oscilloscopes, VNAs, TDRs, LCR meters, and automated test systems., • Working knowledge of high-speed and RF concepts including impedance control, insertion loss, reflections, return loss, and crosstalk., • Proven, methodical approach to troubleshooting and root-cause analysis in a production environment., • Strong communication skills with the ability to translate technical findings into actionable guidance for technicians, manufacturing, and design teams., • High attention to detail with disciplined documentation and follow-through., • Working knowledge of MS Office; experience with ERP/MES systems is a plus. Education and Experience: • Master’s degree in Electrical Engineering or a closely related field required., • Demonstrated circuit design experience, • Demonstrated hands-on experience in electrical troubleshooting, production support, test engineering, or related roles involving complex PCB assemblies., • Experience in semiconductor ATE design, probe card, or advanced electronics manufacturing environments strongly preferred., • Prior involvement in yield improvement, failure analysis, or process improvement initiatives is highly desirable. Disclaimer: As part of our selection process, shortlisted candidates will be required to complete an onsite technical interview that includes both an oral assessment and a live problem-solving session using a whiteboard. Candidates should be prepared to explain their thought process and demonstrate technical proficiency in real time. All qualified applicants will receive consideration for employment without regard to race, color, religion, gender, gender identity, national origin, age, disability, or veteran status Job Type: Full-time Benefits: • 401(k), • Dental insurance, • Health insurance, • Paid time off, • Vision insurance Work Location: In person

Signal Integrity Principal Engineer Our Electrical Engineering team puts the spark into the full hardware development lifecycle, from concept to production. It takes experts in system architecture definition, design, analysis, prototyping, sourcing & the debugging and validation of layouts or routes to deliver state-of-the-art products for a changing world. We work closely with designers, cross-functional teams within Dell Technologies and suppliers to make sure electronic designs meet a range of requirements, including schedule, feature set, functionality and quality, as well as industry standards. Join us to do the best work of your career and make a profound social impact as a Signal Integrity Principal Engineer on our Core Hardware Development Team in Round Rock, Texas. What you'll achieve As a Signal Integrity Principal Engineer you'll drive innovation across Dell's enterprise hardware portfolio, i.e. Power Edge Servers, AI Servers, storage products You'll solve complex transmission-line challenges, guide best practices, and collaborate with internal teams and Original Design Manufacturer ( ODM partners to push what's possible in high frequency designs. You will: * Build, validate , and correlate advanced Signal Integrity ( SI simulation models Develop simulation strategies to characterize worst-case conditions across manufacturing and environmental variations * Analyze electrical designs and define routing/material/interconnect solutions for new high speed interfaces such as PCIe, DDR, xGMI , UPI, etc * Perform channel simulations across packages and PCBs * Work with IBIS-AMI, S-parameter models, and tools like Ansys HFSS, Keysight ADS, Cadence Allegro, and other leading industry tools * Optimize interconnects to meet insertion loss, return loss, eye diagram, and BER targets * Lead SI design reviews and influence platform wide best practices * Own electrical validation test plan development and support issue resolution * Collaborate with key technology suppliers on future-facing guidelines, tools, and ecosystem challenges Essential Requirements * 8 server design and experience with both Peripheral Component Interconnect Express (PCIe) and Double Data Rate (DDR) interfaces * Strong fundamentals in transmission lines, electromagnetic ( EM fields, and analog/digital theory * Proficiency with SI simulation tools e.g. High-Frequency Structure Simulator ( HFSS SiWave Advanced Design System ( ADS) hands-on experience with Time Domain Reflectometry ( TDR Vector Network Analyzer ( VNA , and other SI test equipment * Ability to perform Printed Circuit Board ( PCB layout reviews using Allegro, Xpedition , or similar * Proven collaboration with customers and cross functional teams Desirable Requirements * Bachelor's degree in either electrical engineering or computer engineering Compensation Dell is committed to fair and equitable compensation practices. The base salary range for this position is $166,600 - $185000 Benefits and Perks of working at Dell Technologies Your life. Your health. Supported by your benefits. You can explore the overall benefits experience that awaits you as a Dell Technologies team member — right now at ___ Who we are We believe that each of us has the power to make an impact. That's why we put our team members at the center of everything we do. If you're looking for an opportunity to grow your career with some of the best minds and most advanced tech in the industry, we're looking for you. Dell Technologies is a unique family of businesses that helps individuals and organizations transform how they work, live and play. Join us to build a future that works for everyone because Progress Takes All of Us. Dell Technologies is committed to the principle of equal employment opportunity for all employees and to providing employees with a work environment free of discrimination and harassment. Read the full Equal Employment Opportunity Policy ___ Job ID:R285082

Bachelor's Degree in Electrical Engineering or a relevant engineering discipline. Master's Degree in Electrical Engineering or a relevant engineering discipline. Principal Electrical Design Engineer.

Job Description Whether you're a recent grad or a seasoned professional, you can experience meaningful career growth at Rosendin. Enjoy a true sense of ownership as you work with a proven industry leader on some of the most exciting and high-profile projects in the nation. We offer a wide range of job opportunities, competitive compensation, full benefits, an Employee Stock Ownership Plan and more. Why Rosendin?Committed. Innovative. Engaged. If you're looking to take your career to the next level and work with some of the best and brightest in the industry, we want to hear from you. Since our founding over 100+ years ago, Rosendin has been driven to positively impact the communities where we live and work. We are an organization built on integrity and we have a culture that empowers people, embraces diversity, and inspires everyone to do their best. As one of the largest EMPLOYEE-OWNED electrical contractors in the United States, you will have the unique benefit of being a shareholder at a company that is experiencing tremendous growth and success. When our people succeed and fuel our success, we reward them. We'd love to have you as a shareholder! YOUR NEXT OPPORTUNITY: Power System Protection Engineer III is a senior-level engineering position responsible for performing protection studies and developing relay settings to support the implementation, commissioning, and testing of protection systems for electrical power networks. This role focuses on designing and applying protection strategies for medium and high-voltage systems serving mission critical, commercial, and industrial facilities. The position requires advanced technical expertise, the ability to work independently on complex protection challenges, and the capability to mentor and train other engineering staff. WHAT YOU'LL DO: * Design, specification, setting calculation, and coordination of protective relaying and relay control schemes. * Develop protection schemes and relay settings for electrical equipment, including transformers, generators, transmission lines, feeders, and buses, in accordance with client requirements and system specifications. * Develop and configure protection relay settings, including overcurrent, differential, distance and backup protection relays. * Perform coordination studies to ensure proper relay operation and minimize system downtime during fault conditions. * Use power system modeling tools (e.g. ETAP, SKM, CAPE, ASPEN) to simulate and analyze protection systems, fault scenarios, and equipment ratings. * Conduct studies such as fault analysis, short circuit, AC and DC arc flash and harmonics studies. * Support field testing, commissioning, and validation of protection relays and control systems to ensure proper operation and compliance with project requirements. * Diagnose and troubleshoot relay protection issues, perform root cause analysis, and develop corrective actions for mis-operations or unexpected trips. * Collaborate with other engineers, project managers, and clients to ensure the successful implementation of protection systems. * Prepare technical documentation, including relay settings, test reports, system protection studies, and coordination diagrams. * Ensure compliance with applicable industry standards and regulatory requirements (e.g., IEEE, IEC, NEC, NFPA 70E, NERC). * Act as a proactive technical leader, guiding project teams, solving complex protection challenges, and supporting project execution across all phases from design through commissioning. WHAT YOU BRING TO US: * Bachelor's degree in Electrical Engineering (BSEE) with a power systems focus. * 6+ years relevant application experience in protection and relay settings for electric power systems supporting mission critical infrastructure, commercial and industrial facilities and substations. * A U.S.-based Professional Engineer (PE) registration is required. * High proficiency with power system modeling tools such as ETAP, SKM, ASPEN, and CAPE. * Applied knowledge and experience of Power system Protection on: Overcurrent / Over-Undervoltage, Transformer Differential, High and Low Impedance Busbar Differential, Generator Protection, Motor Protection, and Medium/High Voltage Line Differential and Distance Protection. * Strong experience developing protection schemes and relay settings for redundant power architectures supporting data centers and other mission critical facilities. * High proficiency in relay settings development and programming for SEL, Siemens, and GE protective relays. * Experience developing and managing relay settings files using vendor software such as SEL AcSELerator, GE Enervista, or equivalent. * Demonstrated ability to mentor and develop technical teams. * Strong leadership, written and oral communication, and organizational skills. * Strong computer skills with the ability to identify and apply appropriate software tools to support complex engineering analysis. * Proven ability to manage WHAT YOU'LL NEED TO BE SUCCESSFUL: * Advanced experience using Mathcad and Microsoft Excel for developing protective setting calculation sheets. * Working knowledge of NERC reliability standards, particularly PRC-019/023/024/025/026/027 * Experience with commonly utilized communication protocols (DNP, SEL, MMS, Modbus, etc). * Working Knowledge of IEC 61850 (GOOSE, MMS, SV) and its application in modern substations and mission critical facilities. * Experience designing and supporting protection systems for redundant power topologies (e.g., N, N+1, 2N) common to data center electrical systems. * Proven ability to lead small to mid-size projects, including management of schedules, budgets, staffing, and technical execution. * Experience supporting proposal development including scope of work, level of work, engineering estimates, and schedule. * -Strong leadership skills with a demonstrated interest in training and developing early career engineers. * Demonstrated success managing complex protection engineering tasks within multidisciplinary, fast-paced project environments. TRAVEL: * Up to 50% (Does not include local field visits) WORKING CONDITIONS: * General work environment - sitting for long periods, standing, walking, typing, carrying, pushing, bending. Work is conducted primarily indoors with varying environmental conditions, such as fluorescent lighting and air conditioning * Noise level is usually low to medium * Occasional lifting of up to 40 lbs. * We fully comply with the ADA and applicable state law, including considering reasonable accommodation measures that may enable qualified disabled applicants and employees to perform essential functions. Rosendin Electric is committed to creating a diverse environment and is proud to be an Equal Opportunity Employer. Employment decisions are considered regardless of race, color, religion, sex, sexual orientation, gender identity, national origin, disability, veteran status, pregnancy, age (over 40), or any other categories protected by applicable federal, state, or local law. YOU Matter - Our Benefits * ESOP - Employee Stock Ownership * 401K * Annual bonus program based upon performance, profitability, and achievement * 17 PTO days per year plus 10 paid holidays * Medical, Dental, Vision Insurance * Term Life, AD&D Insurance, and Voluntary Life Insurance * Disability Income Protection Insurance * Pre-tax Flexible Spending Plans (Health and Dependent Care) * Charitable Giving Match with our Rosendin Foundation Our success is rooted in our people. We all come together around long-term vision and a sense of shared ownership. As a group, we do whatever it takes to ensure the success of our business and your career. Rosendin Electric is committed to creating a diverse environment and is proud to be an Equal Opportunity Employer. Employment decisions are considered regardless of race, color, religion, sex, sexual orientation, gender identity, national origin, disability or veteran status.

Job Description Whether you're a recent grad or a seasoned professional, you can experience meaningful career growth at Rosendin. Enjoy a true sense of ownership as you work with a proven industry leader on some of the most exciting and high-profile projects in the nation. We offer a wide range of job opportunities, competitive compensation, full benefits, an Employee Stock Ownership Plan and more. Why Rosendin?Committed. Innovative. Engaged. If you're looking to take your career to the next level and work with some of the best and brightest in the industry, we want to hear from you. Since our founding over 100+ years ago, Rosendin has been driven to positively impact the communities where we live and work. We are an organization built on integrity and we have a culture that empowers people, embraces diversity, and inspires everyone to do their best. As one of the largest EMPLOYEE-OWNED electrical contractors in the United States, you will have the unique benefit of being a shareholder at a company that is experiencing tremendous growth and success. When our people succeed and fuel our success, we reward them. We'd love to have you as a shareholder! YOUR NEXT OPPORTUNITY: The Engineering Team Lead is an engineering management position responsible for providing technical engineering oversight and design team management for engineering projects for which they are assigned. This technical management role is responsible for financial, resource allocation, logistic and technical leadership of projects and has the capability to mentor and train staff under their supervision. WHAT YOU'LL DO: * Possess the ability to understand project requirements and develop a design fee for the work requested. * Prepare and oversee work plans for engineering and production resources. * Oversee Engineers, Designers and Modeling staff assigned to team or project work. * Ability to communicate with Project Manager (PM) or Executive regarding effort required to accomplish an expected deliverables and project support.This may include developing requests for additional services for submittal to the PM or Owner. * Lead the Engineering CAC effort and interaction with the project PM. * Able to resolve a variety of complex problems (i.e. conflicting design requirements, unsuitability of conventional materials, difficult coordination requirements). * Supervise the coordination of the project with city, state, and county officials, and other regulatory agencies * Attendance at project design meetings with the overall Design Build Team. * Job Site Visits to review installation or assess current conditions. * Perform Value Engineering studies. * Act as Engineer of Record for projects within their responsibility. * The duties and responsibilities are intended to describe the general nature and scope of. This is a partial listing and other responsibilities will be assigned based on the position's role within the business unit. WHAT YOU BRING TO US: * Bachelor's Degree from an accredited university or college in engineering, architectural engineering, or construction sciences. * Typically requires a minimum of 8 years of Engineering Experience * Registration as a licensed US-based Professional Engineer (P.E.) is required for this position. * Field experience is strongly recommended. * Education and experience can be a combination of education, training, and relevant experience. COMPETENCIES: * Leadership - Ability to lead a diverse team of people to accomplish a goal. * Communication - Fluency of communication in oral and written formats. * Teamwork - Ability to work collaboratively with a diverse group to deliver an extraordinary result. WHAT YOU'LL NEED TO BE SUCCESSFUL: * Knowledge of engineering processes and calculations including load calculations, equipment layout, normal and emergency standby distribution, HV/MV distribution, lighting layout, lighting calculations, power and lighting controls, utility coordination, grounding, value engineering, applicable codes, and standards, is required. * Working knowledge of equipment and system testing and commissioning. * The ability to assume responsibility, interface, and coordinate with others. * The ability to analyze and resolve complex engineering problems. * The ability to oversee Electrical System Studies such as: Short Circuit, Overcurrent Protection, Arc Flash, Voltage Drop/Droop, and Underground Thermal Calculations. * Management skills are required, including work planning, resource management, fee development, staff oversight, staff development and advancement planning. * Knowledge of electrical construction sufficient to understand how design packages will be built. * Fluency with Building Codes and Local Codes in the local area of projects. * Proficient in using a computer and Microsoft Office (Outlook, Word, Excel, etc.); Oracle preferred * Ability to prioritize and manage multiple tasks, changing priorities as necessary * Ability to work under time pressure and adapt to changing requirements with a positive attitude * Effective oral and written communication skills. * Ability to be self-motivated, proactive and an effective team player. * Ability to interact effectively and professionally with all levels of employees, both management and staff alike, vendors, clients, Trade Partners and others TRAVEL: * up to 25% (Does not include local field visits) WORKING CONDITIONS: * General work environment - sitting for extended periods, standing, walking, typing, carrying, pushing, bending. Work is conducted primarily indoors with varying environmental conditions, such as fluorescent lighting and air conditioning. * Noise level is typically low to medium; it can be loud on a job site. * Occasional lifting of up to 30 lbs. * We fully comply with the ADA and applicable state law, including considering reasonable accommodation measures that may enable qualified disabled applicants and employees to perform essential functions. Rosendin Electric is committed to creating a diverse environment and is proud to be an Equal Opportunity Employer. Employment decisions are considered regardless of race, color, religion, sex, sexual orientation, gender identity, national origin, disability, veteran status, pregnancy, age (over 40), or any other categories protected by applicable federal, state, or local law. YOU Matter - Our Benefits * ESOP - Employee Stock Ownership * 401K * Annual bonus program based upon performance, profitability, and achievement * 17 PTO days per year plus 10 paid holidays * Medical, Dental, Vision Insurance * Term Life, AD&D Insurance, and Voluntary Life Insurance * Disability Income Protection Insurance * Pre-tax Flexible Spending Plans (Health and Dependent Care) * Charitable Giving Match with our Rosendin Foundation Our success is rooted in our people. We all come together around long-term vision and a sense of shared ownership. As a group, we do whatever it takes to ensure the success of our business and your career. Rosendin Electric is committed to creating a diverse environment and is proud to be an Equal Opportunity Employer. Employment decisions are considered regardless of race, color, religion, sex, sexual orientation, gender identity, national origin, disability or veteran status.

Job Description Controls Engineer On-Site A client of ours is seeking a Controls Engineer to support the development and deployment of custom industrial systems. This is a hands-on opportunity for early-career engineers or technicians looking to build experience in controls, robotics, and system integration. What You’ll Do • Support design of electrical and control systems for automated equipment, • Assist with PLC, HMI, and robotic programming and troubleshooting, • Develop and maintain schematics, I/O lists, and technical documentation, • Participate in equipment build, wiring, and system testing, • Assist with startup, commissioning, and field troubleshooting, • Associate degree or equivalent experience in electrical, automation, or related field, • Foundational knowledge of industrial controls (PLCs, sensors, motor controls), • Hands-on mindset with strong troubleshooting ability, • Exposure to platforms such as Allen-Bradley, Siemens, Omron, or CODESYS is a plus, • Familiarity with robotics, motion systems, or machine vision preferred, • Understanding of electrical standards (UL, NEC) is a plus Paul Curran | Liberty Personnel Services, Inc. 1001 Conshohocken State Rd, Ste 2-410| West Conshohocken, PA 19428 | Company DescriptionLibertyjobs.com has become an essential destination site for experienced job seekers. Our recruiters are continually posting active job openings to the website. Feel free to search our database of open positions and apply for your next career move! Hundreds of new jobs are listed on the site every month in a wide range of industries and locations. Last year we had over 900,000 unique job seekers visit our website, which means over 75,000 skilled job seekers search our openings every month. Established in 2003, Liberty Personnel quickly grew into one of the largest technical recruiting agencies on the East Coast. Today, Liberty Personnel has a national presence and a diverse client base. Listed below are a number of the industries and openings we work on: Information Technology, Software Programmers, Engineering, Manufacturing, Legal, Plant Maintenance, Construction, Oil and Gas, Medical Communications, Accounting, Finance, Electronics, Scientific, Medical Device, Sales, Pharmaceutical, Admin, Automation, Controls, Civil, HVAC, Wastewater, Structural, Electrical, Chemists, Validations, Logistics, Food Production, Renewable Energy and Machinists.Libertyjobs.com has become an essential destination site for experienced job seekers. Our recruiters are continually posting active job openings to the website. Feel free to search our database of open positions and apply for your next career move!\n\nHundreds of new jobs are listed on the site every month in a wide range of industries and locations. Last year we had over 900,000 unique job seekers visit our website, which means over 75,000 skilled job seekers search our openings every month.\n\nEstablished in 2003, Liberty Personnel quickly grew into one of the largest technical recruiting agencies on the East Coast. Today, Liberty Personnel has a national presence and a diverse client base. Listed below are a number of the industries and openings we work on:\n\nInformation Technology, Software Programmers, Engineering, Manufacturing, Legal, Plant Maintenance, Construction, Oil and Gas, Medical Communications, Accounting, Finance, Electronics, Scientific, Medical Device, Sales, Pharmaceutical, Admin, Automation, Controls, Civil, HVAC, Wastewater, Structural, Electrical, Chemists, Validations, Logistics, Food Production, Renewable Energy and Machinists.

Job DescriptionSUMMARY Leads concept development and one-line designs for data center power distribution and protection from 480 v to 161 kV. Ensures safe, reliable, and code compliant power system architecture from utility interface down to IT loads. Provides PE stamp as required. ESSENTIAL DUTIES AND RESPONSIBILITIES • Develop system one line diagrams and power flow concepts, • Perform load studies, short circuit, arc flash and protection studies, • Define ratings, configurations, and protection schemes for High Voltage, Medium Voltage, Low Voltage reclosures, switchgear, transformers, UPS systems, busway, generator systems, and related equipment, • Provide technical direction and design criteria to Electrical and Mechanical Engineers for detailed design, ensuring consistency with the overall system concept, • Review and approve system studies, equipment selections, and key drawings to ensure compliance with NEC, IEEE standards, utility interconnection requirements, and customer specifications, • Develop and provide to purchasing detailed equipment specifications and work with Purchasing to review electrical equipment OEMs quotations and did documents, • Support customer and internal design reviews; present study results and address technical questions from EPCs, utilities, and AHJs, • Collaborate with Product Manager, Project Manager, and Supply Chain to optimize system designs for performance, safety, cost, and constructability, • Serve as a subject matter expert during factory testing and commissioning, assisting with troubleshooting and design clarifications as needed, • Compliance with all Company policies is required, including adherence to Company ISO 9001 Standards and compliance with Company Affirmative Action Plan and Company Safety procedures, • Compliance with applicable Company policies concerning maintaining a drug free workplace is required, • Regular attendance is an essential function of this position, • Other functions as required (non-essential functions) SCOPE, PURPOSE, AND FREQUENCY OF CONTACTS The position requires daily contact with all levels of TWMC and customers including Engineering, Marketing, Factory Operations, Supply Chain, Service and Accounting. QUALIFICATIONS To perform this job successfully, an individual must be able to perform each essential duty satisfactorily. The requirements listed below are representative of the knowledge, skill, and/or ability required. EDUCATION AND EXPERIENCE • Bachelor's degree (B.S.) from four-year college or university in Electrical Engineering with five or more years of related work experience, or Master’s degree preferred, or equivalent combination of education and experience, • 5+ years of experience in power system design, • Hands on experience with ETAP, SKM or similar analysis tools, • Deep knowledge of NEC, IEEE standards, • Experience with large scale data centers preferred, • Familiarity with MV gear (5–38 kV), generator paralleling, and microgrid concepts preferred CERTIFICATES, LICENSES, REGISTRATIONS • Licensed Professional Engineer (PE) in Texas, or ability to obtain within 12 months SKILLS AND ABILITIES • Write reports and correspondence, • Speak effectively before groups of customers or employees of organization, • Define problems, collect data, establish facts, and draw valid conclusions. Ability to interpret an extensive variety of technical instructions in mathematical or diagram form and deal with several abstract and concrete variables. Working knowledge of statistical tools, • Bias for action LANGUAGE SKILLS The ability to read, analyze, and interpret manufacturing drawings, repair specifications, test results, and technical journals. Respond to inquiries from customers, regulatory agencies, or members of the business community. Communicate effectively in the presence of top management, customers, trade associations, and other public groups. MATHEMATICAL SKILLS Ability to apply advanced mathematical concepts such as exponents, logarithms, quadratic equations, algebra, permutations, calculus, and differential equations. Ability to apply mathematical operations to such tasks as frequency distribution, determination of test reliability and validity, analysis of variance, correlation techniques, sampling theory, and factor analysis. REASONING ABILITY Ability to apply common sense understanding to carry out instructions furnished in written, oral, or diagram form. Ability to Identify a solution to a problem involving several concrete variables in standardized situations. SUPERVISION RECEIVED General supervision will be provided. Must be a self-starter with the ability to work effectively and take ownership of assigned projects in a fast-paced environment. PHYSICAL DEMANDS The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. While performing the duties of this job, the employee is regularly required to stand; walk; use hands to finger, handle, or feel; reach with hands and arms; stoop, kneel, crouch, or crawl; talk or hear; and taste or smell. The employee is frequently required to climb or balance. The employee is occasionally required to sit. The employee must occasionally lift and/or move up to 20 pounds. Specific vision abilities required by this job include close vision, distance vision, color vision, peripheral vision, depth perception, and ability to adjust focus. WORK ENVIRONMENT The work environment characteristics described here are representative of those an employee encounters while performing the essential functions of this job. While performing the duties of this job, the employee is regularly exposed to vibration. The employee is frequently exposed to moving mechanical parts and risk of electrical shock. The employee is occasionally exposed to wet and/or humid conditions; high, precarious places; fumes or airborne particles; outside weather conditions; extreme cold; and extreme heat. The noise level in the work environment is usually high. MANAGEMENT DISCLAIMER TECO-Westinghouse Motor Company's (TWMC) Management reserves the right to revise, change or modify the duties and responsibilities of this position at any time to meet business and organizational needs. This position description may not list all duties for this position. The incumbent in the position may be asked to perform other duties. This position description is not a contract for employment and either the incumbent or TWMC may terminate employment at any time, for any reason. Powered by JazzHR NBiFsGB7Dq

Job DescriptionWe are seeking an Automation Engineer Specialist to support customers and internal sales teams by providing technical expertise on industrial automation products. In this role, you will work directly with customers to understand application needs, recommend solutions, and support the implementation of automation systems. This position requires strong technical knowledge of automation equipment including variable frequency drives (VFDs), programmable logic controllers (PLCs), human-machine interfaces (HMIs), and motion control systems. The ideal candidate enjoys solving technical challenges, collaborating with customers, and supporting automation projects in a variety of industrial environments. Key Responsibilities Customer & Technical Support • Work directly with customers to evaluate automation needs and recommend appropriate solutions, • Visit customer sites to support system design, application discussions, and troubleshooting, • Provide technical support for automation products including VFDs, PLCs, HMIs, and servo systems, • Assist customers with commissioning, configuration, and troubleshooting of automation equipmentProduct Expertise & Training, • Deliver product training at company facilities and customer locations, • Develop and deliver technical product presentations, • Support new product introductions and product launches, • Provide feedback on product performance, quality, and potential design improvementsCollaboration & Sales Support, • Partner with field sales teams to support technical discussions and solution development, • Assist the Controls Product Manager with technical and product-related initiatives, • Support trade shows, industry events, and customer demonstrations, • Help customers identify automation solutions that improve performance, efficiency, and reliabilityMarket & Product Insight, • Monitor automation trends and customer application needs, • Provide feedback on competitive technologies and market opportunities, • Support continuous improvement efforts related to product quality and performanceQualifications:Required:, • Bachelor’s degree in Electrical Engineering, Automation Engineering, or a related field, • 2–5 years of experience in industrial automation or controls engineering, • Ability to travel up to 50%Experience working with automation technologies such as:, • Variable Frequency Drives (VFDs), • Programmable Logic Controllers (PLCs), • Human Machine Interfaces (HMIs), • Contactors and control systems, • Motion control and servo systems, • Hands-on experience commissioning and troubleshooting automation systems, • Strong analytical and problem-solving skills, • Excellent communication and presentation skillsPreferred Experience: Experience with automation platforms including: • Rockwell Automation / Allen-Bradley Siemens, • Automation Direct, • Danfoss, • Yaskawa, • FujiFamiliarity with PLC platforms such as:, • ControlLogix, • Siemens S7, • Modbus RTU / Modbus TCP, • EtherNet/IP, • BACnet, • EtherCAT, • Profibus / ProfinetAutomation system design and troubleshooting, • PLC programming and controls support, • Industrial networking and communication protocols, • Technical training and customer support, • Strong project management and organization skills, • Ability to communicate complex technical concepts clearlyWhat Makes Someone Successful in This Role, • Strong curiosity for automation technology, • Ability to diagnose and solve complex technical problems, • Excellent collaboration with customers, engineers, and sales teams, • Self-motivated with the ability to manage multiple projects, • Commitment to safety, quality, and continuous improvementWhy Join Us, • Work with advanced industrial automation technologies, • Collaborate with experienced engineers and technical teams, • Opportunity to support diverse industrial applications, • Exposure to new product development and automation innovations yuydX32jZC

Job DescriptionDescription: (Full-Time) Georgetown, TX (On-site) Department: Operstions Reports to: Engineer/Quality Manager Headquartered in Georgetown, Texas, Everware International supports a family of innovative companies dedicated to revolutionizing the culinary and foodservice industries. Our flagship brand, Cangshan Cutlery, epitomizes our commitment to crafting exquisite kitchen knives using premium materials and expert craftsmanship. Alongside Cangshan, our family includes respected entities like New Star Foodservice, Henry Foodservice Products, and our US manufacturing team at Austin Cutlery & Tool. Each of these contributes to our mission by crafting quality products and delivering an exceptional experience. We’re an organization that values teamwork, excellence, and a growth mindset. We’re looking for ‘A-players’ to join our team. Interested candidates, please send resumes to . Position Summary The Manufacturing Engineer will serve as a hands-on technical contributor supporting the installation, commissioning, and optimization of advanced production equipment and automation systems. This role will bridge engineering, operations, and maintenance, ensuring mechanical, electrical, and software systems are properly integrated and documented. Key Responsibilities • Assemble, install, and commission new production equipment, including electrical and mechanical systems., • Troubleshoot and validate equipment functionality, resolving electro-mechanical and software-related issues., • Support SCADA, MES, and PLC system setup, programming, and integration with existing ERP systems., • Perform equipment acceptance testing, both onsite and at vendor locations., • Develop, review, and revise engineering documentation (schematics, work instructions, bill of materials, etc.)., • Collect, analyze, and report operational data to support process optimization and quality assurance., • Conduct root cause investigations and recommend corrective actions for technical issues., • Maintain the engineering lab and assist with preventative maintenance routines., • Bachelor or Associate degree in Engineering Technology, Electronics Systems, Mechatronics, Industrial Technology, or a related field., • 3–5 years of engineering experience supporting industrial equipment in an automated or semi-automated production environment., • Proficiency in reading and editing schematics, wiring diagrams, and PLC ladder logic (Siemens preferred)., • Skilled in the use of multimeters, oscilloscopes, calipers, and other diagnostic tools., • Experience with PLC and HMI programming, SCADA/MES systems, and industrial communications (Ethernet/IP, Modbus, Profibus)., • Familiarity with automation, robotics, and controls safety standards (NFPA 70E, NEC, etc.)., • Familiarity with manufacturing equipment safety standards (control of hazardous energy, confined space, machine guarding, etc.) and maintenance best practices., • Strong computer skills, including MS Office Suite and digital documentation tools., • Experience with mechanical manufacturing equipment (e.g., machining, grinding, etc.), robotic systems, and/or embedded controls is a plus., • Strong problem-solving and troubleshooting capabilities, • Effective verbal and written communication U.S. citizenship required; visa sponsorship is not available for this position Job Type: Salaried Salary Range: $55,000 - $75,000 More about our team! Our Vision: Our team members are thriving! Our customers and communities are enriched! Our Culture: We believe every great organization embodies a healthy culture based on a set of core values. Within our family of companies, we strive to demonstrate these values through our behavior, our attitudes, and our decision-making. We expect every team member to exemplify these values and to hold themselves and each other accountable to exhibiting them, continually. Our foundational values are Collaboration, Respect, Excellence, Accountability, and Trust every day! Everware offers competitive wages and benefits, including: • 401 (k) plan, • Company 401 (k) Matching Contributions, • Employee Assistance Program (EAP), • Medical, Dental, & Vision Insurance with an employer contribution of up to $650.00, • Paid Vacation Time & 10 Paid Holidays, • Health Savings Account (HSA), • Life, Dependent Life and AD&D Insurance, • Voluntary Term Life, • Voluntary Short & Long Term Disability Employment at Everware Corporation is contingent upon proof of your legal right to work in the United States under applicable law, verification of satisfactory references, successful completion of a background check and drug test, and signing all your on-boarding documents. Requirements:

Job DescriptionSUMMARY The Electrical Engineer is responsible for turning system one line into detailed electrical diagrams and panel layouts, selecting and specifying components, preparing technical specs, coordinating with Mechanical and Power system engineers, reviewing drawings for UL/NEC.ANCI compliance, and supporting FAT/SAT testing and troubleshooting. ESSENTIAL DUTIES AND RESPONSIBILITIES • Translate system one lines into detailed three-line diagrams, wiring schematics and panel layouts, • Select, size, and specify electrical components: breakers, relays, CT/PT, UPS, meters, control devices, cable/busway, terminal blocks, and protective devices based on load, fault levels, coordination studies, and project specifications, • Prepare detailed technical specifications, datasheets, and equipment schedules for procurement and vendors, including performance requirements, ratings, environmental conditions, and test/inspection criteria, • Coordinate closely with the Mechanical Engineer to optimize equipment layout, cable routing, clearances, service access, and heat management requirements (ventilation, HVAC interfaces, derating for ambient temperature, etc.), • Support the PLC/controls engineer by developing and maintaining I/O lists, signal descriptions, wiring termination details, and interface definitions for protection relays, meters, sensors, and monitoring systems, • Review and comment on vendor submittals and drawings to ensure alignment with project requirements, and UL/NEC compliance, • Participate in design reviews and resolve electrical design issues in collaboration with Power System, Mechanical, and Controls engineers, • Support factory testing (FAT) by preparing test procedures, verifying wiring and functional operation, troubleshooting electrical issues, and documenting punch list items and corrective actions, • Represents the Company before customers and at technical conferences in support of marketing and sales, • Compliance with all Company policies is required, including adherence to Company ISO 9001 Standards and compliance with Company Affirmative Action Plan and Company Safety procedures, • Compliance with applicable Company policies concerning maintaining a drug free workplace is required, • Regular attendance is an essential function of this position, • Other functions as required (non-essential functions) SCOPE, PURPOSE, AND FREQUENCY OF CONTACTS The position requires daily contact with all levels of TWMC and customers including Engineering, Marketing, Factory Operations, Supply Chain, Service and Accounting. QUALIFICATIONS To perform this job successfully, an individual must be able to perform each essential duty satisfactorily. The requirements listed below are representative of the knowledge, skill, and/or ability required. EDUCATION AND EXPERIENCE • Bachelor's degree (B.S.) from four-year college or university in Electrical Engineering with five or more years of related work experience, or Master’s degree preferred, or equivalent combination of education and experience, • 5+ years of experience in LV/MV power distribution or switchgear/UPS design, • Strong knowledge of NEC, UL standards and industrial control panels, • Proficiency with CAD or Visio for schematics and point-to-point wiring table, • Three to five years of experience using applicable industry standards, • Experience with data center power distribution or modular systems preferred, • Familiarity with protective relays and communication protocols preferred CERTIFICATES, LICENSES, REGISTRATIONS As required, based on job responsibilities, education, and customer specific needs. SKILLS AND ABILITIES • Write reports and correspondence, • Speak effectively before groups of customers or employees of organization, • Define problems, collect data, establish facts, and draw valid conclusions. Ability to interpret an extensive variety of technical instructions in mathematical or diagram form and deal with several abstract and concrete variables. Working knowledge of statistical tools, • Bias for action LANGUAGE SKILLS The ability to read, analyze, and interpret manufacturing drawings, repair specifications, test results, and technical journals. Respond to inquiries from customers, regulatory agencies, or members of the business community. Communicate effectively in the presence of top management, customers, trade associations, and other public groups. MATHEMATICAL SKILLS Ability to apply advanced mathematical concepts such as exponents, logarithms, quadratic equations, algebra, permutations, calculus, and differential equations. Ability to apply mathematical operations to such tasks as frequency distribution, determination of test reliability and validity, analysis of variance, correlation techniques, sampling theory, and factor analysis. REASONING ABILITY Ability to apply common sense understanding to carry out instructions furnished in written, oral, or diagram form. Ability to Identify a solution to a problem involving several concrete variables in standardized situations. SUPERVISION RECEIVED General supervision will be provided. Must be a self-starter with the ability to work effectively and take ownership of assigned projects in a fast-paced environment. PHYSICAL DEMANDS The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. While performing the duties of this job, the employee is regularly required to stand; walk; use hands to finger, handle, or feel; reach with hands and arms; stoop, kneel, crouch, or crawl; talk or hear; and taste or smell. The employee frequently is required to climb or balance. The employee is occasionally required to sit. The employee must occasionally lift and/or move up to 20 pounds. Specific vision abilities required by this job include close vision, distance vision, color vision, peripheral vision, depth perception, and ability to adjust focus. WORK ENVIRONMENT The work environment characteristics described here are representative of those an employee encounters while performing the essential functions of this job. While performing the duties of this job, the employee is regularly exposed to vibration. The employee is frequently exposed to moving mechanical parts and risk of electrical shock. The employee is occasionally exposed to wet and/or humid conditions; high, precarious places; fumes or airborne particles; outside weather conditions; extreme cold; and extreme heat. The noise level in the work environment is usually high. MANAGEMENT DISCLAIMER TECO-Westinghouse Motor Company's (TWMC) Management reserves the right to revise, change or modify the duties and responsibilities of this position at any time to meet business and organizational needs. This position description may not list all duties for this position. The incumbent in the position may be asked to perform other duties. This position description is not a contract for employment and either the incumbent or TWMC may terminate employment at any time, for any reason. Powered by JazzHR EY0BBeRMII

Job Description Auto-Chlor is now hiring an Electrical Engineer-Equipment Design to lead our engineering development initiatives. We’re looking for a leader who will contribute to our “People First” culture. This position would work in-office full-time at our facility in MEMPHIS, TN. What’s in it for you? RELOCATION ASSISTANCE OFFERED We understand that great talent can come from anywhere. That's why we offer: • Up to 60 days of temporary housing, • Reimbursement for moving and travel expenses, • Support with general relocation needs, • A people first culture where contributions and collaboration are encouraged and celebrated., • A competitive salary up to $150k annually with an excellent benefits package., • Ongoing wellness initiatives to improve your health and well-being. What are some of the day-to-day responsibilities? • Develops and implements solutions for dishwasher and dispensing innovation projects, including both new equipment development and existing equipment innovation. Projects vary in duration from two months to over a year based on Project Brief requirements., • Administers regulatory compliance with agencies such as NSF, CSA, UL, BOCA, ASSE, UPC, and Federal, State, and Local authorities. Provides support to the field sales team on regulatory issues, with an emphasis on maintaining customer equipment operation without disruption to business., • Provides technical support to field sales team, contractors, consultants, engineers, and architects., • Develops and manages technical documentation for design control and field use. Requirements: • Bachelor of Science in Engineering Degree or comparable years of work experience., • 5-10 years of electrical and electronic design experience, along with experience working with regulatory agencies. Experience in the commercial appliance industry is preferred., • Embedded Software/hardware design, • Knowledge of codes and standards for plumbing, sanitation, electrical, and building (NSF, CSA, UL, BOCA, ASSE, UPC, FDA), • Electrical/electronic circuit design, • CAD Modeling – Autodesk Inventor Preferred Location: 746 Poplar Ave Memphis, TN 38105 #PROFESSIONAL

Job Description Company Overview: Hanwha Convergence USA is a leading provider of O&M Servies for Solar and Energy Storage Systems, leveraging our industry-leading IT and engineering capabilities. In addition, we are a trusted smart factory solutions provider, supplying top-notch integrated control and monitoring systems. Our company is committed to bringing tomorrow's dreams to life and creating a smarter world with our customers by adding value to technology. Note for external recruiting firms: We are not accepting unsolicited resumes at this time. Please do not contact our employees regarding this position. Position Summary: A PPC (Power Plant Control) engineer designs, programs, and maintains the control systems that govern renewable energy facilities, such as wind, solar, battery energy storage system, or hybrid. This is a specialized role within the field of controls engineering, focusing on optimizing energy production and ensuring grid stability and regulatory compliance. He or She also conducts applicable tests and commissioning complying with local/international codes and/or standards and may lead small to medium size projects as assigned. Essential Duties and Responsibilities: · Develop and program Power Plant Controller (PPC) systems that dictate the plant's behavior at the point of interconnection with the power grid. · Create control strategies that ensure the power plant meets the specific grid code requirements of the regional transmission organization (e.g., ERCOT or CAISO in the U.S.). This includes managing voltage, frequency, and reactive power. · Support the testing, tuning, and field installation of control equipment to ensure proper operation. · Tune PPC systems to maximize the energy output from renewable sources and maintain grid stability. · Provide ongoing technical support for new and existing projects, which may involve remote troubleshooting or on-site visits. · Work with SCADA (Supervisory Control and Data Acquisition) and other control systems to collect data, visualize plant performance, and ensure coordinated operation. · PPC projects execution include concept proposal, engineering work packages, construction work packages, inspection and test procedures, FAT/SAT, commissioning, and operation and maintenance. · Identify applicable standards and collateral standards for the diverse applicable sites. · Lead any design changes required to ensure standards compliance or continuous improvement. · Perform PPC technical presentations to clients but not limited. · Mentor and train the less experienced engineers and technicians. · Lead and manage the assigned PPC projects with available resources for successful projects completion in a due date and a budget. · Conduct/facilitate risk analysis activities as required. · Perform other duties and/or tasks as requested Education and/or Experience Requirements: · Bachelor's degree in electrical, electronic, or computer engineering preferred. · SEL RTAC experience is mandatory. · More than three (3) years' experience in PPC. · SCADA experience such as Ignition is considered a huge asset. · Strong understanding of electrical power systems, grid code requirements, and power control is essential. Experience with electrical system modeling and simulation tools (like PSSE, DigSILENT, or MATLAB/Simulink) is often beneficial. · Be familiar with NERC CIP regulatory requirements. · Communication protocol experience required such as Modbus, DNP3, MQTT, OPC UA · Occasional overnight phone calls or travel may be required for client meetings or site visits. · Ability to solve problems and identify root causes as part of investigations. · Ability to work with others in a team environment. Physical Requirements / Work Environment: · This position is preferred based on Georgetown, TX but remote position may be considered for strong candidates. · Fast paced with priorities that often change to meet current priorities. · Travel to customer sites is required, and the ability to travel internationally with a valid passport. · Must be legally entitled to work in the USA and prepared to travel abroad. COMPENSATION: $80,000 - $118,000 salary Hanwha Convergence is proud to be an at-will Equal Opportunity Employer and prohibits discrimination against race, color, religion, sex, sexual orientation, gender perception or identity, national origin, age, marital status, pregnancy, citizenship, disability, protected veteran status and any other classification protected by applicable federal, state or local law. This policy applies to all terms and conditions of employment, including recruiting, hiring, placement, promotion, termination, layoff, recall, transfer, leaves of absence, compensation and training. We are committed to the full inclusion of all qualified individuals. As part of this commitment, Hanwha Convergence will provide reasonable accommodations to all qualified individuals with disabilities to participate in the job application or interview process, to perform essential job functions, and/or to receive other benefits and privileges of employment. Please contact us to request accommodations. Nothing in this statement shall imply implicitly or explicitly a guarantee of employment outside our at-will employment opportunity. You may view your privacy rights by reviewing Hanwha Convergence Privacy Policy here or contacting our HR Team for a copy.

Job Description Whether you're a recent grad or a seasoned professional, you can experience meaningful career growth at Rosendin. Enjoy a true sense of ownership as you work with a proven industry leader on some of the most exciting and high-profile projects in the nation. We offer a wide range of job opportunities, competitive compensation, full benefits, an Employee Stock Ownership Plan and more. Why Rosendin? Committed. Innovative. Engaged. If you're looking to take your career to the next level and work with some of the best and brightest in the industry, we want to hear from you. Since our founding over 100+ years ago, Rosendin has been driven to positively impact the communities where we live and work. We are an organization built on integrity and we have a culture that empowers people, embraces diversity, and inspires everyone to do their best. As one of the largest EMPLOYEE-OWNED electrical contractors in the United States, you will have the unique benefit of being a shareholder at a company that is experiencing tremendous growth and success. When our people succeed and fuel our success, we reward them. We'd love to have you as a shareholder! YOUR NEXT OPPORTUNITY: The Senior Supplier Quality Surveillance Engineer is responsible supporting Procurement in the implementation and execution of Procurement Supplier Quality Inspections and audits. WHAT YOU'LL DO: * Perform quality assurance and quality control shop inspections and audits to ensure critical materials and engineered equipment purchased meet or exceed our customer's and contract quality and workmanship expectations * The Inspector will assist in ensuring the subcontracts or corporate agreements for good and services meet Rosendin Procurement quality standards and customer's expectations * Require a working understanding of Rosendin electrical equipment and materials related to fabrication, testing, and functionality * Be able to read and understand equipment specifications, drawings, provide feedback in regard to recommended supplier testing and inspections * Report to management and Project personnel about manufacturing problems, and assist in identifying and correcting these problems * Communicate inspection and audit results, both verbally and written, and recommend necessary corrective actions * Have a thorough knowledge of Procurement quality procedures, documents, and reporting structures * Assist Rosendin Procurement in Supplier/Subcontractor prequalification by providing input on the fabricator's quality program by performing supplier audits/assessments. * Provide support to Divisions and projects in overseeing fabricator and subcontractor quality as needed * Review Supplier/Subcontractor Non-Conformance Reports (NCR) and assist in developing corrective action plans. Coordinate with Quality Managers to approve final disposition and sign off NCR's * Provide input to Rosendin Procurement in rating the overall quality performance of suppliers and subcontractors * Highly skilled and experienced in written and verbal communications to include leading pre-fabrication meetings, creating pre-fabrication checklists, writing inspection/audit reports * Perform other duties as assigned WHAT YOU'LL NEED TO BE SUCCESSFUL: * Broad working knowledge of all design/craft disciplines and engineered equipment/materials associated with renewable energy and electrical projects and must be familiar with their special processes, inspection, and testing techniques * Broad working knowledge of the following: * Transformers: Power (oil filled and dry type), Distribution ( LV dry-type), and Isolation * Switchgear: MV/LV switchgear, metal-clad, metal-enclosed, gas insulated (GIS, Busway, Panelboards, Circuit breakers * UPS: static switches, PDU, Inverters * Generators * BESS and PV inverter modules * Wire and cable: DC feeder, MV cable, MCM, Wire harness, * Must be familiar with electrical procurement and vendor surveillance procedures as well as working knowledge of construction industry codes and standards related to the manufacture and testing of electrical components/systems such as IEEE, IECC, NEC, NFPA, NESC, IBC, IFC, etc.) * Be detail-oriented * Effective time management and organizational skills, * Excellent interpersonal, written and verbal communication skills, and * Must be team player but able to work independently, to meet intense deadlines, goals and objectives WHAT YOU BRING TO US: * 7+ years of professional supplier experience * 5+ years of professional supplier quality experience and 2-year associate's degree in electrical technology * 3+ years of professional supplier quality experience and 4-year bachelor's degree in electrical engineering * API SIEE Certification preferred * ISO 9001 Lead Auditor Certification preferred TRAVEL: * The position may require up to 85% travel and may require occasional travel outside of the USA • WORKING CONDITIONS: General work environment - sitting for long periods, standing, walking, typing, carrying, pushing, bending. Work is conducted primarily indoors with varying environmental conditions such as fluorescent lighting and air conditioning * Noise level is usually low to medium; it can be loud on the jobsite. * We fully comply with the ADA and applicable state law, including considering reasonable accommodation measures that may enable qualified disabled applicants and employees to perform essential functions. * Occasional lifting of up to 30 lbs. Rosendin is committed to creating a diverse environment and is proud to be an Equal Opportunity Employer. Employment decisions are considered regardless of race, color, religion, sex, sexual orientation, gender identity, national origin, disability, veteran status, pregnancy, age (over 40), or any other categories protected by applicable federal, state, or local law. YOU Matter - Our Benefits * ESOP - Employee Stock Ownership * 401 K * Annual bonus program based upon performance, profitability, and achievement * 17 PTO days per year plus 10 paid holidays * Medical, Dental, Vision Insurance * Term Life, AD&D Insurance, and Voluntary Life Insurance * Disability Income Protection Insurance * Pre-tax Flexible Spending Plans (Health and Dependent Care) * Charitable Giving Match with our Rosendin Foundation Our success is rooted in our people. We all come together around long-term vision and a sense of shared ownership. As a group, we do whatever it takes to ensure the success of our business and your career. Rosendin Electric is committed to creating a diverse environment and is proud to be an Equal Opportunity Employer. Employment decisions are considered regardless of race, color, religion, sex, sexual orientation, gender identity, national origin, disability or veteran status.

Job Description Whether you're a recent grad or a seasoned professional, you can experience meaningful career growth at our Company. Enjoy a true sense of ownership as you work with a proven industry leader on some of the most exciting and high-profile projects in the nation. We offer a wide range of job opportunities, competitive compensation, full benefits, an Employee Stock Ownership Plan and more. Why Us? Committed. Innovative. Engaged. If you're looking to take your career to the next level and work with some of the best and brightest in the industry, we want to hear from you. Since our founding over 100+ years ago, our company has been driven to positively impact the communities where we live and work. We are an organization built on integrity and we have a culture that empowers people, embraces diversity, and inspires everyone to do their best. As one of the largest EMPLOYEE-OWNED electrical contractors in the United States, you will have the unique benefit of being a shareholder at a company that is experiencing tremendous growth and success. When our people succeed and fuel our success, we reward them. We'd love to have you as a shareholder! YOUR NEXT OPPORTUNITY: The Engineer III is a senior engineering position responsible for providing technical engineering information and assistance to ensure compliance with the project requirements and all engineering standards, applicable codes, and specifications. This is a senior engineering role with developed subject matter expertise and the capability to mentor and train other staff. WHAT YOU'LL DO: • Oversee a team of engineers, designers, and staff on a project basis or individual initiative., • Supervise process coordination between architectural, structural, mechanical, plumbing, and all electrical trades., • Oversee the preparation of designs, including power, lighting, and auxiliary systems., • Oversee preparation of power system single-line diagrams, including feeder, over current protection sizing, and equipment elevations., • Supervise or conduct short circuit and over-current protection device coordination studies and Arc Flash Studies., • Supervise or conduct distribution analysis, including voltage drop, voltage droop, and underground heat effect (Neher-McGrath) calculations., • Bachelor's degree in engineering, architectural engineering, or construction sciences, • Typically requires a minimum of 5 years of Engineering Experience, • One-year on-site field experience strongly encouraged, • Advanced knowledge of electrical engineering subjects, including power distribution, lighting, grounding, energy conservation, value engineering, applicable codes, standards, etc., is required to design state-of-the-art constructible projects., • Proficient in Autodesk, Microsoft Office (Outlook, Word, Excel, etc.), Illumination software, and Oracle software pertaining to Engineering Productivity and CAC generation., • Ability to prioritize and manage multiple tasks, changing priorities as necessary, • Up to 50% (Does not include local field visits) We are committed to creating a diverse environment and is proud to be an Equal Opportunity Employer. Employment decisions are considered regardless of race, color, religion, sex, sexual orientation, gender identity, national origin, disability, veteran status, pregnancy, age (over 40), or any other categories protected by applicable federal, state, or local law. Our success is rooted in our people. We all come together around long-term vision and a sense of shared ownership. As a group, we do whatever it takes to ensure the success of our business and your career. We are committed to creating a diverse environment and is proud to be an Equal Opportunity Employer. Employment decisions are considered regardless of race, color, religion, sex, sexual orientation, gender identity, national origin, disability or veteran status.

Job DescriptionSUMMARY The Mechanical Engineer, PE is responsible for reviewing and approving the mechanical design of data center medium and low voltage products. This role ensures structural integrity, proper lifting and transportation design, thermal performance, and compliance with applicable codes, while developing and maintaining mechanical design standards and material specifications. The engineer will collaborate closely with overseas mechanical teams, provide final engineering sign-off, and support factory builds. ESSENTIAL DUTIES AND RESPONSIBILITIES • Review and approve 3D models and fabrication drawings for skids, enclosures, and mechanical assemblies, • Verify structural design, lifting points, seismic/wind considerations, and transportation constraints, • Evaluate thermal management (airflow, ventilation, filters, louvers, HVAC interface) for enclosed power modules, • Check equipment layouts for maintainability, clearances, and NEC working-space requirements, • Develop and maintain mechanical design standards, material specs, and painting/corrosion protection requirements, • Work with external design resources (overseas mechanical teams) and perform final engineering sign-off, • Support factory builds and resolve mechanical non-conformities, • Represents the Company before customers and at technical conferences in support of marketing and sales, • Compliance with all Company policies is required, including adherence to Company ISO 9001 Standards and compliance with Company Affirmative Action Plan and Company Safety procedures, • Compliance with applicable Company policies concerning maintaining a drug free workplace is required, • Regular attendance is an essential function of this position, • Other functions as required (non-essential functions) SCOPE, PURPOSE, AND FREQUENCY OF CONTACTS The position requires daily contact with all levels of TWMC and customers including Engineering, Marketing, Factory Operations, Supply Chain, Service and Accounting. QUALIFICATIONS To perform this job successfully, an individual must be able to perform each essential duty satisfactorily. The requirements listed below are representative of the knowledge, skill, and/or ability required. EDUCATION AND EXPERIENCE • Bachelor's degree (B.S.) from four-year college or university in Mechanical Engineering with five or more years of related work experience, or Master’s degree preferred, or equivalent combination of education and experience., • 5+ years of mechanical design experience in heavy electrical equipment, containers, or industrial skids, • Proficiency with 3D CAD (SolidWorks, or similar), • Understanding of structural design, lifting/rigging, and basic thermal analysis, • Experience with modular power systems or data center infrastructure preferred, • Familiarity with relevant codes/standards (ASCE, AISC, AWS, ASHRAE, etc.) preferred CERTIFICATES, LICENSES, REGISTRATIONS Licensed Professional Engineer (PE) in Texas, or the ability to obtain within 12 months SKILLS AND ABILITIES • Mandarin Chinese proficiency is preferred for coordination with overseas teams., • Write reports and correspondence, • Speak effectively before groups of customers or employees of organization, • Define problems, collect data, establish facts, and draw valid conclusions. Ability to interpret an extensive variety of technical instructions in mathematical or diagram form and deal with several abstract and concrete variables. Working knowledge of statistical tools, • Bias for action LANGUAGE SKILLS The ability to read, analyze, and interpret manufacturing drawings, repair specifications, test results, and technical journals. Respond to inquiries from customers, regulatory agencies, or members of the business community. Communicate effectively in the presence of top management, customers, trade associations, and other public groups. MATHEMATICAL SKILLS Ability to apply advanced mathematical concepts such as exponents, logarithms, quadratic equations, algebra, permutations, calculus, and differential equations. Ability to apply mathematical operations to such tasks as frequency distribution, determination of test reliability and validity, analysis of variance, correlation techniques, sampling theory, and factor analysis. REASONING ABILITY Ability to apply common sense understanding to carry out instructions furnished in written, oral, or diagram form. Ability to Identify a solution to a problem involving several concrete variables in standardized situations. SUPERVISION RECEIVED General supervision will be provided. Must be a self-starter with the ability to work effectively and take ownership of assigned projects in a fast-paced environment. PHYSICAL DEMANDS The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. While performing the duties of this job, the employee is regularly required to stand; walk; use hands to finger, handle, or feel; reach with hands and arms; stoop, kneel, crouch, or crawl; talk or hear; and taste or smell. The employee frequently is required to climb or balance. The employee is occasionally required to sit. The employee must occasionally lift and/or move up to 20 pounds. Specific vision abilities required by this job include close vision, distance vision, color vision, peripheral vision, depth perception, and ability to adjust focus. WORK ENVIRONMENT The work environment characteristics described here are representative of those an employee encounters while performing the essential functions of this job. While performing the duties of this job, the employee is regularly exposed to vibration. The employee is frequently exposed to moving mechanical parts and risk of electrical shock. The employee is occasionally exposed to wet and/or humid conditions; high, precarious places; fumes or airborne particles; outside weather conditions; extreme cold; and extreme heat. The noise level in the work environment is usually high. MANAGEMENT DISCLAIMER TECO-Westinghouse Motor Company's (TWMC) Management reserves the right to revise, change or modify the duties and responsibilities of this position at any time to meet business and organizational needs. This position description may not list all duties for this position. The incumbent in the position may be asked to perform other duties. This position description is not a contract for employment and either the incumbent or TWMC may terminate employment at any time, for any reason. Powered by JazzHR WkzFGSgKyk

Job Description Whether you're a recent grad or a seasoned professional, you can experience meaningful career growth at Rosendin. Enjoy a true sense of ownership as you work with a proven industry leader on some of the most exciting and high-profile projects in the nation. We offer a wide range of job opportunities, competitive compensation, full benefits, an Employee Stock Ownership Plan and more. Why Rosendin?Committed. Innovative. Engaged. If you're looking to take your career to the next level and work with some of the best and brightest in the industry, we want to hear from you. Since our founding over 100+ years ago, Rosendin has been driven to positively impact the communities where we live and work. We are an organization built on integrity and we have a culture that empowers people, embraces diversity, and inspires everyone to do their best. As one of the largest EMPLOYEE-OWNED electrical contractors in the United States, you will have the unique benefit of being a shareholder at a company that is experiencing tremendous growth and success. When our people succeed and fuel our success, we reward them. We'd love to have you as a shareholder! YOUR NEXT OPPORTUNITY: The Engineer III is a senior engineering position responsible for providing technical engineering information and assistance to ensure compliance with the project requirements and all engineering standards, applicable codes, and specifications. This is a senior engineering role with developed subject matter expertise and the capability to mentor and train other staff. WHAT YOU'LL DO: * Oversee a team of engineers, designers, and staff on a project basis or individual initiative. * May be the Engineer of Record for projects as assigned. * Supervise, review, comment, and process equipment and system submittals. * Supervise process coordination between architectural, structural, mechanical, plumbing, and all electrical trades. * Oversee the preparation of designs, including power, lighting, and auxiliary systems. * Oversee preparation of power system single-line diagrams, including feeder, over current protection sizing, and equipment elevations. * Supervise or conduct short circuit and over-current protection device coordination studies and Arc Flash Studies. * Supervise or conduct distribution analysis, including voltage drop, voltage droop, and underground heat effect (Neher-McGrath) calculations. * Oversee the project specifications or equipment buy-out. * Visit job sites to field survey existing electrical conditions. * Supervise or Utilize engineering analysis programs and professional judgment to analyze loads, lighting levels, and short circuit currents. * Conduct value engineering exercises to evaluate the cost of construction. * Attend project design team meetings and interface with various team members, particularly the client, architect, and mechanical contractor/engineer. * Work closely with the Rosendin Project Manager to coordinate the design criteria with budgetary issues and deliverables schedule on the projects they are assigned. * Research and resolve drawing interpretation problems, conflicts, interferences, and errors during project installation. * Generate project specifications appropriate for the project. * Develop a complete and accurate sequence of operations for all designed systems. * Working knowledge of equipment and system testing and commissioning. * Perform work involving the application of conventional aspects of electrical engineering related to the design of high-tech, mission-critical health industry, commercial, industrial, high-rise residential, and other facilities. * Review plans and technical specifications, contract documents, and estimates. * Supervise the design and ongoing progress of a project, including the coordination of the project with the city, state, county officials, and other outside agencies. * Oversee plans and specifications, establish schedules, and coordinate electrical engineering work. * Prepare documentation for the commissioning of a building. * Resolve various complex problems (i.e., conflicting design requirements, unsuitability of conventional materials, difficult coordination requirements, technical issue resolution). * The duties and responsibilities describe this position's general nature and scope of work. This is a partial listing, and other responsibilities will be assigned based on the position's role within the business unit. WHAT YOU BRING TO US: * Bachelor's degree in engineering, architectural engineering, or construction sciences * Typically requires a minimum of 5 years of Engineering Experience * One-year on-site field experience strongly encouraged * Licensure as a US-based Professional Engineer is required * Can be a combination of education, training, and relevant experience WHAT YOU'LL NEED TO BE SUCCESSFUL: * Advanced knowledge of electrical engineering subjects, including power distribution, lighting, grounding, energy conservation, value engineering, applicable codes, standards, etc., is required to design state-of-the-art constructible projects. * Proficient in Autodesk, Microsoft Office (Outlook, Word, Excel, etc.), Illumination software, and Oracle software pertaining to Engineering Productivity and CAC generation. * Ability to prioritize and manage multiple tasks, changing priorities as necessary * Ability to work under time pressure and adapt to changing requirements with a positive attitude * Effective oral and written communication skills as required for the position * Ability to be self-motivated, proactive, and an effective team player * Ability to interact effectively and professionally with all levels of employees, both management and staff alike, vendors, clients, and others TRAVEL: * Up to 50% (Does not include local field visits) WORKING CONDITIONS: * General work environment - sitting for long periods, standing, walking, typing, carrying, pushing, bending. Work is conducted primarily indoors with varying environmental conditions, such as fluorescent lighting and air conditioning * Noise level is usually low to medium * Occasional lifting of up to 40 lbs. * We fully comply with the ADA and applicable state law, including considering reasonable accommodation measures that may enable qualified disabled applicants and employees to perform essential functions. Rosendin Electric is committed to creating a diverse environment and is proud to be an Equal Opportunity Employer. Employment decisions are considered regardless of race, color, religion, sex, sexual orientation, gender identity, national origin, disability, veteran status, pregnancy, age (over 40), or any other categories protected by applicable federal, state, or local law. YOU Matter - Our Benefits * ESOP - Employee Stock Ownership * 401K * Annual bonus program based upon performance, profitability, and achievement * 17 PTO days per year plus 10 paid holidays * Medical, Dental, Vision Insurance * Term Life, AD&D Insurance, and Voluntary Life Insurance * Disability Income Protection Insurance * Pre-tax Flexible Spending Plans (Health and Dependent Care) * Charitable Giving Match with our Rosendin Foundation Our success is rooted in our people. We all come together around long-term vision and a sense of shared ownership. As a group, we do whatever it takes to ensure the success of our business and your career. Rosendin Electric is committed to creating a diverse environment and is proud to be an Equal Opportunity Employer. Employment decisions are considered regardless of race, color, religion, sex, sexual orientation, gender identity, national origin, disability or veteran status.

Job Description Odyssey Technical Solutions is a state-of-the-art Repair Facility located in Round Rock, Texas that specializes in RF Generators, AutoMatch Networks, DC Power Supplies, Remote Plasma Systems, and Microwave Generators/Power Supplies. We celebrated our 24-year anniversary in August 2024 and have moved into our new Round Rock Headquarters July 2016. JOB SUMMARY Odyssey Technical Solutions has an immediate opening for an experienced RF Engineer in Round Rock, TX. This position supports Odyssey’s core business of repairing critical power delivery systems. Applications for this equipment vary but are typically used to generate and sustain Plasma loads for Films Deposition, Etching, and Coatings in various industries, including Semiconductor Processing, Medical Imaging, Industrial Coatings, and Photovoltaic panels. The RF Engineer will be a critical part of an Engineering Team. The position will work with an exciting range of assignments, including problem-solving, analysis of designs, reversing engineering of existing systems, improvement of existing OEM designs, component engineering, and quick turn prototyping of electrical and mechanical ideas. Odyssey is a fast-paced, active, hands-on position with a highly skilled and motivated team. REQUIRED QUALIFICATIONS: • A BSEE or MSEE degree from an ABET accredited university, • 10+ years of relevant experience, • Practical experience in Design, Analysis, and Fabrication of RF Delivery Systems, including Generators, Matching Networks, and Transmission Lines, • Experience with Magnetrons used in microwave generators and associated waveguides., • Demonstrated competencies in Analog Circuits Design, Schematic Capture, PCB Layout, Prototyping (electrical and mechanical), Thermal Analysis, Impedance Matching, and Component evaluation, • Experience must include working with RF power levels up to 50kW with frequency ranges to 200MHz, • Knowledge of RF power amplifier design (class A, B, C through E), • Passive network design (filters, combiners, splitters, and matching), • A working knowledge of RF simulation tools such as Agilent’s Genesys (or ADS), Sonnet (2.5D), and LTspice or EDA equivalent(s), • Experience utilizing test equipment such as Network/Spectrum analyzers and test equipment used by a person skilled in testing and repairing High Power RF Systems, • A background in Amateur Radio with a track record of building projects and experimenting with radio equipment would be a plus., • Problem-solving skills such as Ishikawa diagrams, • Knowledge of engineering documentation, • Experience with bench shop tools, • Knowledge of electrical safety procedures, • Good communication across functional teams, • Ability and willingness to mentor and teach others methods and techniques, • Use of the Microsoft Office Suite of productivity tools, • Must be fluent in English, both written and spoken Personal computer, including word processing and permitting software; motor vehicle, telephone, cell phone, laptop, ladder or scaffolding, tape measure, and appropriate safety equipment. PHYSICAL DEMANDS The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. Work is performed mostly in indoor settings. Hand-eye coordination is necessary to operate various pieces of office equipment. While performing the duties of this job, the employee is required to stand, walk, use hands to finger, handle, feel or operate objects, tools, or controls; and reach with hands and arms. The employee is frequently required to sit, climb, or balance, stoop, kneel, crouch or crawl, talk and hear. The employee must occasionally lift and/or move up to 25 pounds. Specific vision abilities required by this job include close vision, distance vision, peripheral vision, depth perception, and the ability to adjust focus. WORK ENVIRONMENT The work environment characteristics described here are representative of those an employee encounters while performing the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. While performing the duties of this job, the employee works inside weather conditions. The employee occasionally works near moving mechanical parts and in high, or airborne particles. The noise level in the work environment is usually moderate in the office. BENEFITS • Paid Holidays and PTO, • Medical, Dental and Vision Coverage (eligible after first 60 days employed), • 401k Savings Plan, • Paid Life Insurance, • On-Site Gym

Job Description Whether you're a recent grad or a seasoned professional, you can experience meaningful career growth at Rosendin. Enjoy a true sense of ownership as you work with a proven industry leader on some of the most exciting and high-profile projects in the nation. We offer a wide range of job opportunities, competitive compensation, full benefits, an Employee Stock Ownership Plan and more. Why Rosendin?Committed. Innovative. Engaged. If you're looking to take your career to the next level and work with some of the best and brightest in the industry, we want to hear from you. Since our founding over 100+ years ago, Rosendin has been driven to positively impact the communities where we live and work. We are an organization built on integrity and we have a culture that empowers people, embraces diversity, and inspires everyone to do their best. As one of the largest EMPLOYEE-OWNED electrical contractors in the United States, you will have the unique benefit of being a shareholder at a company that is experiencing tremendous growth and success. When our people succeed and fuel our success, we reward them. We'd love to have you as a shareholder! YOUR NEXT OPPORTUNITY: The Senior Substation Civil/Structural Engineer is responsible for managing all aspects of the design as it relates to electrical substation civil/structural engineering, specifically for HV/MV substation projects. He or She will interface with the preconstruction/estimating and project execution teams to ensure that the civil/structural designs meet all applicable codes and standards and are satisfactory to Rosendin expectations. WHAT YOU'LL DO: * Electrical substation civil/structural design including permitting support, site layout, grading design, main equipment foundations for main circuit breakers, main transformers and switches etc., cable trenches, manholes, cable trays, retaining wall design, stormwater analysis, containment structure design, survey coordination, and civil construction support. * Review civil construction specifications, cost estimates, engineering proposals, and project schedules. * Provide support for transmission line right-of-way access improvement design including culvert sizing, stormwater drainage analysis, stabilization specification, construction support, and inspection. * Assist with analyzing the design for various civil elements related to high-voltage power transmission and substation design. * Partner with clients, vendors, permitting agencies, and various other team members and stakeholders to see projects through to completion. * Assist with estimating to help approximate civil quantities for pricing exercises * Develop civil engineering scope of work for pursuits. * Interface with appropriate project management and field supervision team to provide civil engineering input and knowledge for possible projects Rosendin is pursuing. * Review (QA/QC) civil engineering drawing packages from contracted firms for solar PV projects. * Interface with project management team, field/operations team and other engineering disciplines to ensure all civil aspects of the design are met to Rosendin standards and consider constructability * Attend project meetings (on-site as necessary or remotely). * Provide alternative engineering methods related to civil engineering that may offer cost savings to the project. * Interface directly with civil engineering subcontractors to ensure the most cost effective and code compliant design is being considered and implemented. * Provide civil engineering construction support as the project progresses. * The duties and responsibilities are intended to describe the general nature and scope of work being performed by this position. This is not a complete listing, and other duties will be assigned based on the position's role within the business unit. WHAT YOU'LL NEED TO BE SUCCESSFUL: * Proficient in using a computer and Microsoft Office (Outlook, Word, Excel, Project, etc.) Proficient in Civil 3D * Ability to prioritize and manage multiple tasks, changing priorities as necessary * Ability to work with other engineering disciplines (electrical, structural geotechnical, etc.) * Ability to work under time pressure and adapt to changing requirements with a positive attitude * Effective oral and written communication skills as required for the position * Technical knowledge of design codes and software (Civil 3D, AutoCAD, MicroStation, and stormwater analysis programs) * Understanding of basic practices for evaluating engineering and design issues * Mindset for developing better alternatives and recommendations related to the civil group (i.e.: structure, processes, software, etc.) with the ability to communicate and apply them accordingly * Ability to work in a safe manner and always obey safety regulations * Effective communication skills (verbal, written, and presentation) * Exposure to transmission, substation, environmental, right-of-way, construction, and maintenance stakeholders * Ability to use a collaborative approach when working with peers or clients * Demonstrate a high level of comfort with sharing knowledge freely * Ability to identify relevant metrics and ability to apply them to the business, our clients, and projects * Strong attention to detail and ability to work in a team environment &/or independently * Ability to think creatively as it relates to engineering innovation and solutions * Capacity to thrive in a fast-paced, entrepreneurial, and highly agile environment * Ability to be self-motivated, proactive and an effective team player * Ability to interact effectively and professionally with all levels of employees, both management and staff alike, vendors, clients, and others WHAT YOU BRING TO US: * Bachelor's in Engineering in Civil or Structural Engineering * Professional Engineer (PE) certification * 10+ years of related engineering experience, whether through consulting or working for an electric utility * Project management experience * Extensive knowledge of the fundamentals of managing project scopes, schedules, and budgets * Required Experience in civil/structural design work related to: MV to HV electrical substations and/or electrical switchyards including: site grading, drainage analysis, detention basin design, structural foundation, retaining wall design, geotechnical analysis, pavement design, SPCC design, SW3P design, wetland access roads, and security fencing TRAVEL: * Up to 30% WORKING CONDITIONS: * General work environment - sitting for long periods, standing, walking, typing, carrying, pushing, bending. Work is conducted primarily indoors with varying environmental conditions such as fluorescent lighting and air conditioning * Noise level is usually low to medium; it can be loud on the jobsite. * We fully comply with the ADA and applicable state law, including considering reasonable accommodation measures that may enable qualified disabled applicants and employees to perform essential functions. * Occasional lifting of up to 30 lbs. Rosendin is committed to creating a diverse environment and is proud to be an Equal Opportunity Employer. Employment decisions are considered regardless of race, color, religion, sex, sexual orientation, gender identity, national origin, disability, veteran status, pregnancy, age (over 40), or any other categories protected by applicable federal, state, or local law. YOU Matter - Our Benefits * ESOP - Employee Stock Ownership * 401K * Annual bonus program based upon performance, profitability, and achievement * 17 PTO days per year plus 10 paid holidays * Medical, Dental, Vision Insurance * Term Life, AD&D Insurance, and Voluntary Life Insurance * Disability Income Protection Insurance * Pre-tax Flexible Spending Plans (Health and Dependent Care) * Charitable Giving Match with our Rosendin Foundation Our success is rooted in our people. We all come together around long-term vision and a sense of shared ownership. As a group, we do whatever it takes to ensure the success of our business and your career. Rosendin Electric is committed to creating a diverse environment and is proud to be an Equal Opportunity Employer. Employment decisions are considered regardless of race, color, religion, sex, sexual orientation, gender identity, national origin, disability or veteran status.

Job Description Aquinas Consulting is currently looking to fill a Chief Engineer – Software Engineering job for our direct client in Cedar Park, TX. In this role, you will serve as the top technical authority guiding the architecture, design, and implementation of software systems across Firefly’s major programs—including launch vehicles, lunar landers, and spacecraft. You will lead cross-functional efforts to deliver mission-critical software while ensuring technical excellence, robust system integration, and forward-looking innovation in areas such as AI and autonomous navigation. Chief Engineer – Software Engineering Job Responsibilities: • Provide technical leadership across all software development initiatives, ensuring architectural coherence and mission readiness, • Lead software design reviews and enforce rigorous validation through simulation, HIL testing, and mission rehearsals, • Collaborate with avionics, power, and comms teams to manage software interfaces and system integration, • Guide risk mitigation strategies and maintain performance budgets (CPU, memory, timing), • Lead the adoption of advanced technologies including AI and computer vision for autonomous spacecraft operations, • Mentor and grow software engineering talent while promoting a culture of technical rigor and continuous improvement, • Communicate with stakeholders, customers, and partners to provide technical guidance and status updates, • Bachelor’s degree in Computer Science, Aerospace Engineering, Electrical Engineering, or related field, • 10+ years of experience in embedded or flight software development, particularly in aerospace applications, • Expertise in C++, systems engineering, requirements management, and interface design, • Deep understanding of software testing, verification, and safety-critical environments, • Proven leadership experience managing cross-disciplinary teams and complex software projects, • Familiarity with tools such as Jira, Confluence, and simulation environments, • Strong communication skills and ability to interact with technical and non-technical stakeholders Please note: Applying to this role is an agreement to have your information entered into our database and acknowledgement that a recruiter will reach out to you either by phone, email, and/or text message regarding this and similar job opportunities. Aquinas Consulting is a woman and minority owned company headquartered in Milford, CT that provides Engineering, Information Technology (IT), and Manufacturing staffing solutions throughout the US. We take pride in 20 years of service to our clients, our hiring managers, our consultants, and our local community. Aquinas is an affirmative action, equal opportunity employer and committed to considering all qualified applications without regard to race, genetic information, sex, age, color, religion, national origin, veteran status, disability or any other characteristic protected by law.

Job DescriptionSalary: IT8 is a global engineering services company specializing in industrial automation for the automotive and intralogistics sectors. Founded in 2004 and headquartered in Valencia, Spain, we offer PLC and robotic programming, mechanical and electrical engineering services, as well as installation and site services. Backed by MiddleGround Capital, we operate across both American and European markets and are scaling rapidly into e-mobility, commercial vehicles, and aerospace. Our North American hub is located in Austin, TX. We are hiring a Director of Engineering to lead all technical operations across the US and Mexico. This is a hands-on leadership role (part technical program management, part regional general management) reporting directly to the CTO. You will own the delivery performance of our North American engineering, programming, and installation teams, translate global technical strategy into regional execution, and build the talent and vendor infrastructure to support our growth. Regional Technical Leadership • Directly oversee department managers across mechanical engineering, electrical engineering, PLC/robot programming, and site installation for the US and Mexico., • Drive project execution against deadlines, quality standards, and cost targets - owning utilization rates, gross margin, and project-level P&L., • Ensure operational and technical consistency across disciplines and job sites., • Build, scale, and retain high-performing engineering teams to match growing project demand in North America., • Identify workforce gaps and skill development needs, and design annual training plans with HR., • Maintain and develop a vetted pool of technical subcontractors and outsourcing partners., • Approve outsourcing scope, select providers, and monitor deliverable quality and cost., • Own and report North American technical KPIs to the CTO: utilization %, budget variance, gross margin, earned value, customer satisfaction, and project profitability., • Provide data-driven performance reporting and flag risks and investment needs early. REQUIREMENTS • 10+ years of progressive experience in industrial automation engineering, with a career path from hands-on engineering through management (e.g., Engineer Project/Program Manager Director or equivalent)., • Background in automotive, robotics, or automation strongly preferred. Adjacent automation sectors are also valued., • Proven track record managing multi-discipline technical teams (mechanical, electrical, controls/PLC, installation) across multiple sites or geographies., • Experience owning project-level P&L, managing multi-million-dollar budgets, and driving utilization and margin performance., • Established network of automation vendors, subcontractors, and technical partners in North America., • Fluent in English and Spanish (daily coordination with teams in Mexico and Spain)., • Valid authorization to work in the United States, • Willing to travel domestically and occasionally to Mexico and Europe as projects require. What Sets You Apart You think like a business operator, not just a technologist. Youre as comfortable reviewing a projects margin performance as you are troubleshooting a commissioning issue on the plant floor. You build teams that deliver, manage vendor ecosystems that scale, and communicate with clarity to both your CTO and your field technicians. You thrive in a fast-growing environment where accountability is high and bureaucracy is low. Does it sound like an interesting role for you? We are looking forward to receiving your application. IT8 is an equal-opportunity employer that is committed to diversity and inclusion in the workplace. We prohibit discrimination and harassment of any kind based on race, color, sex, religion, sexual orientation, national origin, disability, genetic information, pregnancy, or any other protected characteristic as outlined by federal, state, or local laws. This policy applies to all employment practices within our organization, including hiring, recruiting, promotion, termination, layoff, recall, leave of absence, compensation, benefits, training, and apprenticeship.

Job DescriptionDescription: Think Power Solutions provides engineering, technical consulting, and field implementation support to utility and energy-sector clients across the U.S. Our teams deliver high-quality design packages, construction solutions, and system improvements that strengthen reliability, resiliency, and grid performance. We are expanding and looking for strong engineering leadership to support our growing distribution portfolio. Lamar Technical Services, LLC, a Think Power Solutions company, is seeking a highly skilled Electric Distribution Engineer to lead complex electric distribution overhead and underground design projects. In this role, you will support our team of technicians and designers and utility clients by developing reliable system solutions, performing advanced engineering analyses, and guiding teams through project execution. You will play a key role in technical decision-making, quality assurance, and mentoring less experienced technicians and designers. Key Responsibilities • Design overhead and underground power distribution systems (typically 4kV–35kV) for new projects, rebuilds, relocations, and system improvements., • Perform pole loading and structural analysis for wood, steel, and concrete structures, including joint-use equipment., • Prepare construction packages, design drawings, BOMs, and material/cost estimates., • Utilize engineering design software including AutoCAD, MicroStation, PLS-CADD, O-Calc, SpidaCalc, and/or Pole Foreman., • Conduct technical studies including power flow, voltage drop, load evaluation, fault analysis, and device coordination., • Ensure compliance with NESC, NEC, RUS, utility-specific design standards, environmental requirements, and safety criteria., • Partner with project management, construction, permitting, and utility stakeholders to resolve issues and maintain design accuracy., • Provide technical leadership, mentorship, peer reviews, and quality oversight to junior engineers and design personnel., • Experience with electric distribution line design, structure modeling, or line routing. Electric transmission experience is a plus., • Field, construction, or utility operations experience., • Familiarity with GIS and WMS platforms or distribution modeling tools., • Experience in resiliency, grid hardening, storm response, or wildfire mitigation., • Bachelor’s Degree in Electrical Engineering (ABET accredited)., • Active Professional Engineer (PE) license., • 3–5+ years of electrical distribution design and engineering experience., • Proficiency in AutoCAD and PLS-CADD, • Proficiency in pole loading software (O-Calc, SpidaCalc, or Pole Foreman)., • In-depth understanding of NESC/NEC standards, utility practices, and distribution construction methods., • The employee may be required to stand, reach with hands and arms, stoop, and kneel, • The employee may be required to sit or stand for long periods, • The employee may be required to lift, carry, push, pull, or move up to 50 pounds, • Travel throughout the region is a core component of this role. Applicants must be willing and able to travel frequently to various job sites as assigned. Think Power Solutions is a certified Great Place to Work company! This credential was earned based on extensive ratings provided by our employees in anonymous surveys conducted by the Great Place to Work organization - the global authority on workplace culture since 1992. Think Power Solutions is a leading tech-enabled infrastructure management solutions provider with highly skilled and dedicated consultants who clients entrust to manage their mission-critical infrastructure. Think Power Solutions was founded with the vision of providing exceptional client service influenced by modern technology to positively impact the utilities, telecom, and construction industries. Think Power Solutions exists to serve its clients, making every effort to understand their needs to produce a high-quality deliverable specifically tailored to meet custom requirements. Our client-centric philosophy, creative thinking, and innovative solutions, combined with stellar project execution attracts top industry talent. Think Power Solutions' culture enables its people to deliver industry leading services and products. Benefits • 401(k) with 3.5% company match, • 100% employer paid employee-only medical plan, • 100% company paid basic life insurance, • 100% company-paid short-term disability, • Optional vision and dental insurance, • Optional long-term disability, • 9 company-paid holidays, • 10 days PTO, • 5 days paid family leave, • 6-weeks maternity leave paid at 100%, • 1-week paternity leave paid at 100%, • Infertility benefits up to $10,000, • Adoption assistance up to $5,000 Note to Recruiters, Placement Agencies, and Similar Organizations Think Power Solutions does not accept unsolicited resumes from agencies. Please do not forward unsolicited agency resumes to our jobs alias, website, or to any Think Power Solutions employee. Think Power Solutions will not pay fees to any third-party agency or firm and will not be responsible for any agency fees associated with unsolicited resumes. Unsolicited resumes received will be considered the property of Think Power Solutions and will be processed accordingly. EEO Statement Think Power Solutions provides equal employment opportunities to all employees and applicants for employment without regard to race, color, religion, sex, sexual orientation, pregnancy or maternity, national origin, citizenship, genetic information, disability, protected veteran, gender identity, age or any other status protected by law. This policy applies to recruiting, hiring, transfers, promotions, terminations, compensation, benefits, and all other terms and conditions of employment. Think Power Solutions will not tolerate any unlawful discrimination towards, or harassment of applicants or employees, by anyone at Think Power Solutions, or anyone working on behalf of Think Power Solutions. Requirements:

Assessment of any project plans and specifications so thoughtful comments can be provided as they relate to the design, scheduling, and possible cost-saving measures.

Bringing together hardware and software systems design, Systems Development Engineering operates at the very cutting edge of technology to meet them. We design and develop electronic and electro-mechanical or systems-orientated products, conduct feasibility studies on engineering proposals and prepa

Bachelor’s or Master’s degree in Electrical Engineering (or related field) with 10+ years of experience in high‑power electrical system design across EV power paths, industrial/UPS systems, or high‑current DC/HV distribution. Electrical Engineer Power Systems. Strong experience with high‑c

Proficiency in design, register-transfer level (RTL) design and simulation test benches. Senior Electrical Engineer - FPGA Development. We work closely with hardware/firmware designers, cross-functional teams within Dell Technologies, and suppliers to ensure FPGA designs meet a range of require

Original Design Manufacturers (ODMs). Founded in 1984, Compal designs and builds cutting-edge technology—from laptops to advanced server systems—for some of the biggest brands in the world. Design, install, maintain, and troubleshoot manufacturing line, equipment, tooling, and automated systems.

Deliver assigned software / system interfaces with design and process across extended teams • Prepare documentation for inspection/testing procedures • Design, develop and implement cost effective methods of testing and troubleshooting software systems and equipment • Prepare test and diagn

Provide project support by coordinating a team of Hilti Business Developers, Account Managers, Regional Managers, and Field Engineers, as well as external contractors, designers, specifiers, and codes and approvals officials. You'll manage cross-functional teams-including Business Developers, Accoun

You will collaborate with cross-functional teams, including electrical engineering, manufacturing, quality, tooling engineering, and other development groups, to champion the successful development and launch of groundbreaking products. As a Technical Staff or Senior Principal Mechanical Engineer, y

This Jobot Job is hosted by: Milan Kacar.Are you a fit? Easy Apply now by clicking the "Apply" button and sending us your resume.Salary: $100,000 - $130,000 per year.Comprehensive Medical, Dental, Vision.Prepare month-end financial closing and analyze financial results, investigate varianc

Mechanical Senior Engineer) or 8+ years (Mechanical Principal Engineer) of experience in Mechanical Engineering, with proven expertise in product design and optimization across multiple technical disciplines. You will collaborate with cross-functional teams, including electrical engineering, manufac

Responsibilities: Electrician must have Ability to follow electrical code manuals to install and repair electrical systems Understand schematic diagrams, blueprints, and other specifications. Electrician must have Indoor electrical experience to include: breakers, wall plugs, wall plates, three-way

Conduct routine inspections and preventive maintenance on electrical systems. Ensure all work is performed in compliance with local, state, and national electrical codes. Strong knowledge of electrical systems, codes, and regulations.

Contribute to the design and architecture of new or re-engineered cryptography security-related software/services. Working at the cutting edge, we design and develop software for platforms, peripherals, applications and diagnostics — all with the most advanced technologies, tools, software enginee

Location: Field Based / On-Site.Read on to fully understand what this job requires in terms of skills and experience If you are a good match, make an application.Perennial Roofing is seeking a reliable and experienced On-Site Project Manager to oversee residential roofing projects from start to fini

Replace lamps, ballasts, drivers, breakers, and other electrical components while escalating complex issues to Engineering leadership as appropriate. Experience troubleshooting electrical distribution systems and lighting systems with ability to read and interpret electrical schematics and drawings.

We provide electrical, handyman, and remodeling services throughout the Greater Austin area and have built a strong reputation through consistent results, clear communication, and a commitment to doing things the right way. Diagnose electrical issues using modern tools.

Clearly explain electrical issues and proposed solutions. Conduct a wide range of electrical installations, repairs, and maintenance in residential settings. Troubleshoot electrical issues and develop effective solutions.

Whether you're new to the electrical industry or have experience as an electrician apprentice without a license, we have the resources to guide you in becoming a proficient electrician. Hands-on Learning: Work alongside experienced electricians to gain practical experience in electrical installation