Electrical design engineer jobs in Chesapeake, VirginiaCreate job alerts

Duties • You will provide enterprise wide scientific and engineering oversight of Combatant Craft Hydromechanics technology development (i.e., resistance and powering, seakeeping, hull form, propulsion, and ship control)., • You will provide oversight and coordination of Combatant Craft Hydromechanics research, development, test and experimentation initiatives across the Naval Research and Development Establishment (NRDE)., • You will recommend and oversee major Combatant Craft Hydromechanics technology and facility investments within the Division, Warfare Centers, NAVSEA, the DoN, and the DoW., • You will ensure coordination of hydromechanics direction, research, proposals, and projects with appropriate Technical Authorities., • You will provide recommended prioritization of Navy investment in innovative technologies, experimental testing, theoretical exploration and research for current and future combatant craft, crewed vehicle and uncrewed vehicle designs.\nRequirements Conditions of employment • Must be a US Citizen., • Must be determined suitable for federal employment., • Must participate in the direct deposit pay program., • New employees to the Department of the Navy will be required to successfully pass the E-Verify employment verification check. To learn more about E-Verify, including your rights and responsibilities, visit e-verify.gov, • Within the Department of Defense (DoD), the appointment of retired military members within 180 days immediately following retirement date to a civilian position is subject to the provisions of 5 United States Code 3326., • Males born after 12-31-59 must be registered for Selective Service., • You will be required to complete ethics orientation within three months of appointment and submit a Confidential Financial Disclosure Report, OGE-450, within 30 days of appointment., • This position is covered under the Defense Acquisition Workforce Improvement Act (DAWIA). Certification in the Acquisition Functional Area and category assigned to the position is required within established category timeframes., • You will be required to obtain and maintain an interim and/or final security clearance prior to entrance on duty. Failure to obtain and maintain the required level of clearance may result in the withdrawal of a job offer or removal., • Successful completion of a pre-employment drug test (including marijuana) is required. A tentative offer of employment will be rescinded if you fail to report to the drug test appointment or fail the test. You will be subject to random testing., • This position may require travel from normal duty station to CONUS and OCONUS and may include remote or isolated sites. You must be able to travel on military and commercial aircraft for extended periods of time.\nQualifications Candidates should be committed to improving the efficiency of the Federal government, passionate about the ideals of our American republic, and committed to upholding the rule of law and the United States Constitution. Candidates will not be hired based on their race, sex, color, religion, or national origin. To meet the minimum qualification requirements for this position, your resume must show that you possess the Technical Qualifications (TQ) related to this position - NOT TO EXCEED 2 PAGES. Resumes over the 2-page limit will be disqualified. Your resume should include examples of experience, education, and accomplishments applicable to the qualification(s). If your resume does not reflect demonstrated evidence of these qualifications, you may not receive consideration for the position. TECHNICAL QUALIFICATIONS (TQs): Your resume should demonstrate accomplishments that would satisfy the technical qualifications: TQ 1. Demonstrated experience of combatant craft hydromechanics across concept, preliminary, and detail design, as well as evaluation and in-service support. Support your response with specific examples. TQ 2. Demonstrated experience to conceive, plan, and manage complex and innovative technical programs within the field of combatant craft hydromechanics. In your response, elaborate on your experience in providing strategic advice, mentorship, and technical guidance to in-house engineering staff, senior management, and the broader Naval Research and Development Establishment (NR&DE) community. Additional qualification information can be found from the following Office of Personnel Management website: Experience refers to paid and unpaid experience, including volunteer work done through National Service programs (e.g., professional, philanthropic, religious, spiritual, community, student, social). Volunteer work helps build critical competencies, knowledge, and skills and can provide valuable training and experience that translates directly to paid employment. Education Applicants must meet the following positive education qualifications requirements of the Office of Personnel Management (OPM) Qualifications Standards Manual: For 08XX Professional Engineering Series: A. Degree: Engineering. Successful completion of a bachelor's or higher engineering degree from an accredited college or university. To be acceptable, the program must: (1) lead to a bachelor's degree in a school of engineering with at least one program accredited by ABET ; or (2) include differential and integral calculus and courses (more advanced than first-year physics and chemistry) in five of the following seven areas of engineering science or physics: (a) statics, dynamics; (b) strength of materials (stress-strain relationships); (c) fluid mechanics, hydraulics; (d) thermodynamics; (e) electrical fields and circuits; (f) nature and properties of materials (relating particle and aggregate structure to properties); and (g) any other comparable area of fundamental engineering science or physics, such as optics, heat transfer, soil mechanics, or electronics. Such education must demonstrate the knowledge, skills, and abilities necessary to do the work of the position. -or- B. Combination of education and experience -- college-level education, training, and/or technical experience that furnished (1) a thorough knowledge of the physical and mathematical sciences underlying engineering, and (2) a good understanding, both theoretical and practical, of the engineering sciences and techniques and their applications to one of the branches of engineering. The adequacy of such background must be demonstrated by one of the following: (I) Professional registration or licensure -- Current registration as an Engineer Intern (EI), Engineer in Training (EIT), or licensure as a Professional Engineer (PE) by any State, the District of Columbia, Guam, or Puerto Rico. Absent other means of qualifying under this standard, those applicants who achieved such registration by means other than written test (e.g., State grandfather or eminence provisions) are eligible only for positions that are within or closely related to the specialty field of their registration. For example, an applicant who attains registration through a State Board's eminence provision as a manufacturing engineer typically would be rated eligible only for manufacturing engineering positions; or (II) Written Test -- Evidence of having successfully passed the Fundamentals of Engineering (FE) examination or any other written test required for professional registration by an engineering licensure board in the various States, the District of Columbia, Guam, and Puerto Rico; or (III) Specified academic courses -- Successful completion of at least 60 semester hours of courses in the physical, mathematical, and engineering sciences and that included the courses specified in the basic requirements under paragraph A. The courses must be fully acceptable toward meeting the requirements of an engineering program as described in paragraph A; or (IV) Related curriculum -- Successful completion of a curriculum leading to a bachelor's degree in an appropriate scientific field, e.g., engineering technology, physics, chemistry, architecture, computer science, mathematics, hydrology, or geology, may be accepted in lieu of a bachelor's degree in engineering, provided the applicant has had at least 1 year of professional engineering experience acquired under professional engineering supervision and guidance. Ordinarily there should be either an established plan of intensive training to develop professional engineering competence, or several years of prior professional engineering-type experience, e.g., in interdisciplinary positions. (The above examples of related curricula are not all inclusive.) An advanced degree of Master's or Ph.D. in one of the educational fields listed above is highly desirable. Additional information Senior Scientific Technical Manager (SSTM) positions are positions which exceed the ND-05 (GS-15 equivalent). SSTMs provide a continuity of technical leadership and oversight that is needed to ensure long term stewardship of an organization's technical capabilities. Typically, applicants for SSTM positions are expected to have a graduate degree, significant research or development experience, and a national or international reputation in his/her field and are recognized throughout the applicable community as a renowned expert. SSTM positions are in the competitive service. This position is not covered by the Department of Defense Priority Placement Program. Additional vacancies may be filled by this announcement. A tentative offer of employment will be rescinded if the selectee fails to meet the pre-employment requirements, including failure to report to any of the scheduled appointments. Federal annuitant information: The selection of an annuitant is subject to the Department of Defense and Department of the Navy policy on the employment of annuitants. Policy information may be found at: There are three key documents that contain important information about your rights and obligations. Please read and retain these documents: • Noncriminal Justice Applicant's Privacy Rights, for those who undergo an FBI fingerprint-based criminal history record check for personnel vetting, which includes Rap Back,, • FD-258 Privacy Act Statement - FBI (this is the same statement used when your fingerprints are submitted as part of your background investigation),

Job Description Company Overview: Continental Tide Defense Systems, Inc. (Continental Tide) is an industry leader, providing engineering and industrial services to the U.S. Navy, U.S. Coast Guard, Military Sealift Command, and other DoD organizations. At Continental Tide, we understand that a great company culture is one where employees know their voice is heard, no matter what their title is, and letting them grow in their role as the company does. We want to provide our employees with the opportunity to learn, be challenged and be in a position where they can succeed, develop new skills, and do things they wouldn't have the opportunity to do elsewhere. Our fast-paced and challenging environment, employees here at Continental Tide can catapult themselves to the top and we're looking for "the best at what they do" to join our team and help us grow. Strong attention to detail is essential as you will be fully engaged from the first day. We offer competitive wages in salaried and hourly positions, educational opportunities, competitive employee benefit options, and a 401(k)-retirement plan with company match. We are always looking for top-talent and we look forward to new-thinkers and team-players joining our company! *Please note due to the anticipated volume of responses, we will contact only those candidates who most closely match our requirements. Only local candidates will be considered. Veteran and retired candidates welcome! Job Overview: Continental Tide is seeking an experienced Engineer to support our Engineering department and Fleet Services Group. The successful candidate will be responsible for project management, installations, repair, and modernization initiatives onboard ships. Essential duties & responsibilities include, but are not limited to the following: \n • Monitors and controls activities at job sites, office, and/or onboard vessels.\n, • Ensures projects/initiatives progress as scheduled and contract specifications are adhered to. Inspects construction site daily and works with contractors to schedule deliveries.\n, • Experienced with NAVSEA Standard Items, 9090-310 Technical Specifications, NSTM standard concepts, practices, and procedures.\n, • Relies on experience and judgment to plan and accomplish goals.\n, • Works with Senior Management, Program Managers and Project Leads with both Surface and Submarine Alterations, Repair or Fleet Modernization projects.\n, • Ensure projects and initiatives progress as scheduled and contract specifications are adhered to.\n, • Interface with clients and customers regarding tasking.\n, • Perform duties outside of specialty to complete work assignment.\n\n Experience and Skills Requirements: \n • Must possess a bachelor's degree in engineering from an ABET accredited college or university.\n, • Target experience of five (5) years of experience in design, installation, testing and/or repair of ships and ship systems aboard US Navy, Military Sealift Command and/or US Coast Guard ships.\n, • Direct experience in ship repair and installation of Hull, Mechanical and Electrical (HM&E) systems and equipment on surface ships and submarines.\n, • Ability to perform detailed ship checks involving collection of data necessary to develop the applicable design modifications for systems and components required to support the system design change\n, • Ability to read and interpret ship installation drawings, installation specifications and NAVSEA Standard Items is a must. \n, • Must have or have the ability to obtain a SECRET clearance\n, • Must have the ability to obtain base access and security credentials\n, • Ability to lift, carry and transport heavy equipment and boxes. The exact weight requirements will be determined by the specific job, but no less than 30 lbs.\n, • Ability to work on and climb ladders, work in extreme temperature environments, aboard ships, in shipyards, under industrial conditions and in confined spaces.\n, • Travel may be required within and outside of the continental United States.\n\n, • Organizational skills and attention to detail\n, • Strong communication skills\n, • Ability to work independently and execute multiple assigned tasks\n, • Exposure to open-air environments, including noisy, hot, and cold conditions.\n, • Required to visit project sites aboard ships and rigs, both onshore and offshore.\n, • Must wear various types of personal protective equipment (PPE), such as hearing, eye, head, and hand protection, as required.\n, • Site visits may involve standing on a variety of surfaces and angles, bending, crouching, and climbing over obstructions such as scaffolding, ladders, and internal barge or boat structural components.\n, • Exposure to sound levels exceeding 100 decibels.\n, • Must possess sufficient visual acuity, peripheral vision, depth perception, and night vision to inspect marine components and systems, identify defects or irregularities, and safely operate tools and equipment.\n, • May work in confined spaces with limited ventilation.\n, • Requires prolonged periods of sedentary work, including sitting and/or standing.\n, • May be required to operate machinery, power tools, and/or heavy equipment.\n, • Must be able to communicate effectively to exchange and comprehend information.\n, • Frequent exposure to extreme weather conditions, including high heat and extreme cold.\n To perform this job successfully, an individual must perform the essential job duties satisfactorily with or without reasonable accommodation and without posing a direct threat to the safety or health of employee or others. Reasonable Accommodations may be made to enable qualified individuals with disabilities to perform the essential functions. Job Benefits Continental Tide offers an empowering professional environment in a culture that emphasizes teamwork, shared responsibility for company and client success, and personal growth. We offer competitive wages in salaried and hourly positions, educational opportunities, competitive employee benefit options, and 401K plan with company match. Apply Today: If you're ready to make a difference, we encourage you to apply and become a part of our mission to deliver quality solutions to the Fleet. To be considered you must apply by going to See all of our latest opportunities at or follow us on our LinkedIn page at . Continental Tide is an Equal Opportunity Employer and participates in E-Verify and U.S. citizenship is required for most positions. Continental Tide prohibits discrimination against any protected class from discrimination on the basis of race, color, religion, sex (including pregnancy, gender identity, and sexual orientation), parental status, national origin, age, disability, genetic information (including family medical history), political affiliation, military service, or other non-merit-based factors. These protections extend to all management practices and decisions, including recruitment and hiring, appraisal systems, promotions, training, and career development programs. Consistent with these obligations, Continental Tide also provides reasonable accommodations to employees and applicants with disabilities; known limitations related to pregnancy, childbirth, or related medical conditions; and for sincerely held religious beliefs, observances, and practices. Continental Tides Defense Systems, Inc. is an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability, or status as a protected veteran". "This contractor and subcontractor shall abide by the requirements of 41 CFR 60-300.5(a). This regulation prohibits discrimination against qualified protected veterans and requires affirmative action by covered prime contractors and subcontractors to employ and advance in employment qualified protected veterans."

Position Title: Field Engineer I, II Work Location: Chesapeake, VA FLSA Status: Full-Time, Non-Exempt REQ#26_01126B Summary of duties - Field Engineer (levels I, II) applies a broad knowledge of electronics in engineering design, analysis, evaluation, and development of engineering and technical documentation and reports. Provides senior technical support to the Project Manager in such areas as task leadership, research, design, development, material identification and procurement support, inventory management, installation, and testing. Exercises discretion and independent judgment of a professional nature to complete engineering tasks. Serves in lieu of, or in conjunction with, engineers in the completion of engineering assignments. Recommends changes and refinements for continuous process improvement. Can act as deck plate Project Manager or Installation Supervisor. Periodically required to lift/move equipment up to and including 50 pounds. Specific description of duties - \n • May assume leadership of subordinates\n, • Assists in the development of Installation Design Packages\n, • Identifies problem areas and provides Condition Discrepancy Reports, Change Order Request Notices, and/or Liaison Action Request preparation\n, • Assists in the development of technical manuals and specifications for systems and equipment\n, • Identifies, analyzes, reports on, and corrects causes of equipment and systems failures\n, • Researches and selects pertinent equipment / material\n, • Conducts briefings and presentations\n, • Performs engineering, quality, and safety audit / inspections\n, • Provides technical expertise and support on installation and production\n, • Conducts pre and post installation testing\n, • Provides project status reports including EVM metrics\n, • Versed in Multi pin / Fiber Optic / RF and other type connectors\n, • Provides final task status for Task Order Closeout reports\n, • Overtime, to include weekend work, and travel outside the local areas is routinely required but not guaranteed\n, • Perform any other assignments or tasks as needed or requested by management to assist in accomplishing the organization's mission, objectives and goals.\n\n Education / Specialized training - • High School diploma or GED may be required depending on varying contract stipulations.\n Level I: \n • Bachelor's degree in applicable field and one year or Associates degree and four years, relative to the industry, or seven years related experience.\n, • Degree should be in Engineering, Management, or a relatable field.\n, • Non-degreed personnel must have seven years technical experience in installation modification, field change, operation, maintenance, testing, troubleshooting and repair of electrical or electronic systems in accordance with Military Standard procedures.\n\n Level II: \n • Bachelor's degree in applicable field and one year or Associates degree and six years relative experience, or ten years directly related experience.\n, • Degree should be in Engineering, Management, or a technically relatable field.\n, • Non-degreed personnel must have ten years' technical experience in installation modification, field change, operation, maintenance, testing, troubleshooting and repair of electrical / electronic systems or NAVSEA governed hot work items in accordance with Military Standard procedures.\n\n Security Clearance - • Clearance up to secret level may be required.\n Certification / Licenses (as required for the task being performed) \n • Cableway certification\n, • Multi-pin connector certification\n, • Fiber Optic connector certification\n, • Fire watch certification\n\n Physical/Environmental Job Requirements - Physical requirements for the job may include the following: \n • Lifting/moving up to and including 50 pounds\n, • Routinely climbing several flights of stairs\n In performing these duties, you may be required to work outdoors. You will experience temperature variations, extremely loud noises and other physical hazards. Company Overview: Prism Maritime, LLC is a premier maritime service provider for Alteration Installation Team (AIT) and Modernization related Services in support of US Maritime and Shore-based clients. Prism Maritime is a privately held business headquartered in Chesapeake, VA, with offices in San Diego and Ventura, CA. Established in 2006, Prism Maritime currently employs over 350 professionals and maintains an ISO 9001-2015 certified Quality Management System. Prism Maritime is an EEO/AA employer. We invite resumes from all interested parties without regard to race, color, religion, sex, national origin, ethnic origin, physical or mental disability, veteran status, age, or any other characteristic protected by federal, state, or local laws. U.S. citizenship is required for most positions. If you need special assistance or an accommodation while seeking employment with us, please email [email protected] or call: 757-460-8800. To Apply: Visit and click on Careers>Job Openings All applications are active for 90 calendar days. After 90 days you must re-apply to still be considered for this position.

Oceaneering Marine Services Division (MSD) has over 30 years of experience providing full-service submarine and surface ship repairs supporting maintenance and alterations aboard commercial and U.S. military vessels. We are SUBSAFE and DSS-SOC certified and perform high-consequence maintenance on assets that operate in demanding environments. Oceaneering Aerospace and Defense Technologies (AdTech) delivers solutions that enable humans to work safely and effectively in harsh environments - from underwater to the outer reaches of space. Our innovative solutions support the development and application of practical, cost-effective systems that meet our customers' challenges - from routine to extreme. Our experience and expertise across multiple industries uniquely positions us as a leader in the government, space, and maritime services markets. Our products and services meet the rigorous demands of the complex environments in which they operate, delivering results without compromising safety or reliability. Oceaneering is a global provider of engineered services and products, primarily to the offshore energy industry. We develop products and services for use throughout the lifecycle of an offshore oilfield, from drilling to decommissioning. We operate the world's premier fleet of work class ROVs. Additionally, we are a leader in offshore oilfield maintenance services, umbilicals, subsea hardware, and tooling. We also use applied technology expertise to serve the defense, entertainment, material handling, aerospace, science, and renewable energy industries. Join our team as a Project Engineer (PE) and take the lead on exciting, large-scale projects that challenge your technical expertise and leadership skills. As a key member of our engineering department, you'll work closely with the Chief Engineer and Project Manager to define and manage the resources, schedule, and costs for our cutting-edge projects. Collaborating with diverse teams across our organization, including QA, Manufacturing, Purchasing, Shipping and Receiving, you'll provide crucial engineering support throughout the manufacturing, integration, and testing phases. With your guidance, our engineering team will deliver high-quality solutions from initial concept to successful completion, ensuring project and production availability align with customer specifications. If you're ready to drive innovation and make a tangible impact within a collaborative environment, apply now. EXPECTATIONS: • Self-motivated, focused individual with strong attention to detail and high ethical standards., • Capable of developing and leading a small engineering team through a complex submarine overhaul., • Ability to read and interpret blue prints, applicable submarine specifications and Special Emphasis Program requirements., • Ability to work as part of a team of managers and technical personnel and support multiple projects., • Strong organizational skills and analytical / logical approach., • Ability to synthesize diverse information (technical, schedule) and exercise good judgment., • Good technical judgment and some independent evaluation, originality and ingenuity are expected., • Independently performs difficult engineering tasks to completion that may include a variety of complex features, conflicting design requirements, unusual materials requirements, and the need to coordinate the work of others., • Excellent technical judgment, and appreciable independent evaluation, creativity, and latitude in making decisions are expected., • Demonstrates ability to devise innovative solutions to problems., • Develops objectives, schedules, and estimates for difficult assignments., • Directs and supervises the activities of small to moderate size teams of engineers and tech writers, • Reviews progress and evaluates results of work accomplished by self and others., • Interacts with customer technical representatives to define and manage customer expectations., • Uses team management skills to lead the design or production engineering group during various phases of a project or availability., • Reviews Engineering Work Packages (e.g. TGIs) related to project., • Assist in Bid and Proposal efforts including cost estimating, technical approach definition, and input to baseline schedule data., • Participate in Technical Working Groups to assess and improve processes and capabilities. EDUCATION: • Minimum 5 years engineering experience in complex systems design, manufacturing, and integration environment. Knowledge related to submarine structural fabrication and welding requirements such as NAVSEA Tech Pub 1688, 278, or 248 and the NAVSEA URO/MRC program desired., • Demonstrated knowledge of military, and commercial, construction and material specifications applicable to Submarine and Deep Submergence System work., • Demonstrated ability to lead technical groups., • Excellent communications and organizational skills., • Demonstrated knowledge of military, and commercial, construction and material specifications applicable to Submarine and Deep Submergence System work., • Possesses and applies an advanced knowledge of engineering principles and practices in one or more engineering fields., • Has provided field support in engineering capacity., • Candidate will have to perform in an ISO-9000 rated company in a rapidly changing and demanding atmosphere., • Must be able to obtain a U.S. DoD Secret Security Clearance., • Must be a U.S. citizen who is not a dual citizen of any other country., • Must be willing to travel up to 25%., • Basic understanding of Project Management. PAY, BENEFITS AND WORK SCHEDULE: We offer a comprehensive and competitive benefits package. Employee benefits vary by role, however, may include Health and Wellness, Mental Health, Retirement Savings, Life and Disability, Paid Maternity and Parental Leave, Paid Time Off, Tuition Reimbursement, and an Employee Assistance Program. All qualified candidates will receive consideration for all positions without regard to race, color, age, religion, sex (including pregnancy), sexual orientation, gender identity,national origin, veteran status,disability, genetic information, or other non-merit factors. Regular full-time employees who apply will be considered along with external candidates. Employees with less than six months with their current position are not eligible to apply for job postings. Please discuss your interest in the position with your current manager/supervisor prior to submitting your completed application. It is highly recommended to apply through the PeopleSoft or Oceanet portals.

Location US-VA-Norfolk ID 2026-11112 Category Field Service Engineer Position Type Regular Full-Time Application Open Date 4/14/2026 Assisting in the fabrication and integration of C4ISR systems into Aircraft Carriers (CVN) under either New Contruction (NewCon) or Carrier Overhaul (RCOH) phases • Assisting technical staff members in the fabrication, integration, testing, operation, maintenance and repair of electrical and mechanical circuits, • Providing feedback to production management and QA with identified issues/defects in design or during the fabrication/integration phase with regards to cables or equipment racks, • Performing on-site installation of equipment and products in the continental United States within various environments to include naval bases and privately owned shipyards, • Providing written daily and weekly progress reporting, • Planning work assignments days and weeks in advance, • Assignments should align with the set schedule to ensure goals are met, • Monitoring progress for production team under their direction #LI-JC1 • High School Diploma/GED, • 10 years of direct work experience, • Minimum of a two-year technical degree and 8 years of work related experience equivalent combination of education and experience should add up to 10 years, • Shipboard Electronics installation experience to include understanding of the following standards: MIL-STD-1310H, MIL-STD-1678-1D, MIL-STD-2003A, and MIL-STD-2042C, • Proficiency in using cable fabrication hand tools to include but not limited to: Heat Guns, Hand Soldering Stations, and various crimp tools, • Cable fabrication assembly experience with the following types of cables: RF, CAT5/6, Heliax, & Multi-pin MIL-STD Cannon Plugs, • Read and interpret drawings, • Proficiency in using Microsoft Excel to maintain, manipulate, and track progress of shipboard production efforts, • C4ISR Navy Shipboard and Shipyard Experience, • Navy "A" or "C" School, • Fiber Optic Termination and Testing Experience (under NAVSEA 8477552 Rev C MIL-STD-2042C) SRC offers a generous benefit package, including medical, dental, and vision plans, 401(k) with a company match, life insurance, vacation and sick paid time off accruals starting at 10 days of vacation and 5 days of sick leave annually, 11 paid holidays, tuition reimbursement, and a work environment that encourages excellence and more. For positions requiring a security clearance, selected applicants will be subject to a government security investigation and must meet eligibility requirements for access to classified information. Scientific Research Corporation is an equal opportunity employer that does not discriminate in employment. All qualified applicants will receive consideration for employment without regard to their race, color, religion, sex, age, sexual orientation, gender identity, national origin, disability, protected veteran status, or any other protected characteristic under federal, state or local law. Scientific Research Corporation endeavors to make accessible to any and all users. If you would like to contact us regarding the accessibility of our website or need assistance completing the application process, please contact for assistance. This contact information is for accommodation requests only and cannot be used to inquire about the status of applications.

Oceaneering Marine Services Division (MSD) has over 30 years of experience providing full-service submarine and surface ship repairs supporting maintenance and alterations aboard commercial and U.S. military vessels. We are SUBSAFE and DSS-SOC certified and perform high-consequence maintenance on assets that operate in demanding environments. Oceaneering Aerospace and Defense Technologies (AdTech) delivers solutions that enable humans to work safely and effectively in harsh environments - from underwater to the outer reaches of space. Our innovative solutions support the development and application of practical, cost-effective systems that meet our customers' challenges - from routine to extreme. Our experience and expertise across multiple industries uniquely positions us as a leader in the government, space, and maritime services markets. Our products and services meet the rigorous demands of the complex environments in which they operate, delivering results without compromising safety or reliability. Oceaneering is a global provider of engineered services and products, primarily to the offshore energy industry. We develop products and services for use throughout the lifecycle of an offshore oilfield, from drilling to decommissioning. We operate the world's premier fleet of work class ROVs. Additionally, we are a leader in offshore oilfield maintenance services, umbilicals, subsea hardware, and tooling. We also use applied technology expertise to serve the defense, entertainment, material handling, aerospace, science, and renewable energy industries. Oceaneering's Marine Services Division (MSD), located in Chesapeake, Virginia, is seeking an Engineer I focused on NEW DESIGN DEVELOPMENT to support engineering and design activities in Chesapeake, VA. This role is ideal for an engineer who wants to create new systems, develop original solutions, and contribute to cutting-edge projects supporting submarine and deep-submergence platforms. The Engineer I applies a solid foundation of engineering principles to design new components, systems, and assemblies, working under the direction of a Mentor, Project Engineer or Design Engineering Manager. The role also requires collaboration with QA, Manufacturing, Purchasing, and Test teams to transition new designs from concept through production, integration, and verification. • Perform engineering tasks focused on new system and component design, including concept development, modeling, analysis, and documentation., • Help to solve design challenges involving conflicting requirements, unique materials, and multi-disciplinary constraints., • Apply sound technical judgment, creativity, and independent evaluation to develop innovative solutions., • Help to develop engineering designs, models, drawings, and calculation packages., • Work effectively in an ISO-9000 environment with rapidly changing priorities., • Participate in Technical Working Groups to improve design processes and capabilities. REQUIRED: • Bachelor's degree in Engineering (Mechanical, Electrical, Ocean, Nuclear) or Naval Architecture., • Proficiency with Microsoft Office and CAD tools such as AutoCAD or SolidWorks., • U.S. citizenship (no dual citizenship)., • Master's degree in related field., • Strong communication and organizational skills., • Understanding of Finite Element Analysis principles-SolidWorks Simulation or ANSYS Workbench preferred., • "Self-starter" attitude that is capable of working on a multidisciplinary engineering team., • Ability to apply advanced engineering principles to new design challenges. PAY, BENEFITS AND WORK SCHEDULE: We offer a comprehensive and competitive benefits package. Employee benefits vary by role, however, may include Health and Wellness, Mental Health, Retirement Savings, Life and Disability, Paid Maternity and Parental Leave, Paid Time Off, Tuition Reimbursement, and an Employee Assistance Program. All qualified candidates will receive consideration for all positions without regard to race, color, age, religion, sex (including pregnancy), sexual orientation, gender identity,national origin, veteran status,disability, genetic information, or other non-merit factors. Regular full-time employees who apply will be considered along with external candidates. Employees with less than six months with their current position are not eligible to apply for job postings. Please discuss your interest in the position with your current manager/supervisor prior to submitting your completed application. It is highly recommended to apply through the PeopleSoft or Oceanet portals.

Oceaneering Marine Services Division (MSD) has over 30 years of experience providing full-service submarine and surface ship repairs supporting maintenance and alterations aboard commercial and U.S. military vessels. We are SUBSAFE and DSS-SOC certified and perform high-consequence maintenance on assets that operate in demanding environments. Oceaneering Aerospace and Defense Technologies (AdTech) delivers solutions that enable humans to work safely and effectively in harsh environments - from underwater to the outer reaches of space. Our innovative solutions support the development and application of practical, cost-effective systems that meet our customers' challenges - from routine to extreme. Our experience and expertise across multiple industries uniquely positions us as a leader in the government, space, and maritime services markets. Our products and services meet the rigorous demands of the complex environments in which they operate, delivering results without compromising safety or reliability. Oceaneering is a global provider of engineered services and products, primarily to the offshore energy industry. We develop products and services for use throughout the lifecycle of an offshore oilfield, from drilling to decommissioning. We operate the world's premier fleet of work class ROVs. Additionally, we are a leader in offshore oilfield maintenance services, umbilicals, subsea hardware, and tooling. We also use applied technology expertise to serve the defense, entertainment, material handling, aerospace, science, and renewable energy industries. Oceaneering's Marine Services Division (MSD) is seeking an Engineer II to support engineering and design activities in Chesapeake, VA. The Engineer II applies a working knowledge of engineering fundamentals to the division's engineering and design activities under the direction of a Project Engineer or Design Engineering Manager. The Engineer II will also be required to interact with other company personnel including those in QA, Manufacturing, Purchasing, Shipping and Receiving, as necessary to provide engineering support to manufacturing, integration, and test activities. • Performs moderately difficult engineering tasks to completion that may include a variety of design features, conflicting design requirements, unusual materials requirements, and the need to coordinate the work of others., • Exhibit good technical judgment, and appreciable independent evaluation, creativity, and latitude in making decisions., • Demonstrate ability to devise innovative solutions to problems., • Develops objectives, schedules, and estimates for difficult assignments., • Review progress and evaluate results of work accomplished by self., • Assess vendors for competence, capabilities, and resources., • Review/approve Engineering Work Packages (e.g. TGIs) related to project., • Review/approve Engineering Change documents (e.g. CRs, LARs, DFSs) related to project., • Review/approve Engineering designs, models, drawings and calculation packages., • Candidate will have to perform in an ISO-9000 rated company in a rapidly changing and demanding atmosphere., • May assist in Bid and Proposal efforts including cost estimating, technical approach definition, and input to baseline schedule data., • May participate in Technical Working Groups to assess and improve processes and capabilities. REQUIRED: • Bachelor's degree in engineering (Mechanical, Electrical, Ocean or Nuclear) or Naval Architecture from accredited college or university., • Minimum two (2) years engineering experience in complex systems design, manufacturing, and integration environment., • Proficiency in Microsoft Office products and CAD software, such as AutoCAD or SolidWorks or similar packages., • Must be a U.S. citizen who is not a dual citizen of any other country., • Master's degree in related field., • Proficiency in Mathcad, SolidWorks Simulation or Ansys., • Experience leading multidisciplinary design teams., • Good communications and organizational skills., • Understands Finite Element Analysis - particularly SolidWorks Simulation or ANSYS Workbench, working knowledge of both is preferrable., • Experience performing Dynamic Design Analysis Method (DDAM) is a plus., • Possesses and applies an advanced knowledge of engineering principles and practices in one or more engineering fields. PAY, BENEFITS AND WORK SCHEDULE: We offer a comprehensive and competitive benefits package. Employee benefits vary by role, however, may include Health and Wellness, Mental Health, Retirement Savings, Life and Disability, Paid Maternity and Parental Leave, Paid Time Off, Tuition Reimbursement, and an Employee Assistance Program. All qualified candidates will receive consideration for all positions without regard to race, color, age, religion, sex (including pregnancy), sexual orientation, gender identity,national origin, veteran status,disability, genetic information, or other non-merit factors. Regular full-time employees who apply will be considered along with external candidates. Employees with less than six months with their current position are not eligible to apply for job postings. Please discuss your interest in the position with your current manager/supervisor prior to submitting your completed application. It is highly recommended to apply through the PeopleSoft or Oceanet portals.

Oceaneering Marine Services Division (MSD) has over 30 years of experience providing full-service submarine and surface ship repairs supporting maintenance and alterations aboard commercial and U.S. military vessels. We are SUBSAFE and DSS-SOC certified and perform high-consequence maintenance on assets that operate in demanding environments. Oceaneering Aerospace and Defense Technologies (AdTech) delivers solutions that enable humans to work safely and effectively in harsh environments - from underwater to the outer reaches of space. Our innovative solutions support the development and application of practical, cost-effective systems that meet our customers' challenges - from routine to extreme. Our experience and expertise across multiple industries uniquely positions us as a leader in the government, space, and maritime services markets. Our products and services meet the rigorous demands of the complex environments in which they operate, delivering results without compromising safety or reliability. Oceaneering is a global provider of engineered services and products, primarily to the offshore energy industry. We develop products and services for use throughout the lifecycle of an offshore oilfield, from drilling to decommissioning. We operate the world's premier fleet of work class ROVs. Additionally, we are a leader in offshore oilfield maintenance services, umbilicals, subsea hardware, and tooling. We also use applied technology expertise to serve the defense, entertainment, material handling, aerospace, science, and renewable energy industries. The Engineer IV applies advanced technical knowledge to Oceaneering's Marine Services Division's (MSD) engineering and design activities. This role is located in Chesapeake, VA. The Engineer IV provides technical leadership and oversight for large and/or complex projects under the direction of a Project Manager. This role assists the Design Engineering Manager and Project Manager in defining and managing resource requirements, schedule, and cost for projects under his/her cognizance. The Engineer IV interacts with other MSD personnel including those in QA, Manufacturing, Purchasing, Shipping and Receiving, as necessary to provide engineering support to MSD manufacturing, integration, and test activities. They direct an engineering design/production team in development of a design project/production availability throughout the entire cycle from initial concept/planning through successful completion. They complete assigned engineering projects in accordance with customer specifications and within schedule and budget limitations through coordinating activities of engineering team, contractors, and vendors. This role may require up to 25% travel. • Independently perform difficult engineering tasks to completion that may include a variety of complex features, conflicting design requirements, unusual materials requirements, and the need to coordinate the work of others., • Exhibit excellent technical judgment, and appreciable independent evaluation, creativity, and latitude in making decisions., • Demonstrate ability to devise innovative solutions to problems., • Develop objectives, schedules, and estimates for difficult assignments., • Direct and supervise the activities of moderate to large size teams of engineers, tech writers, designers, and drafters., • Review progress and evaluate results of work accomplished by self and others., • Interact with customer technical representatives to define and manage customer expectations., • Use team management skills to lead the design engineering group during various phases of a project or availability., • Assess vendors for competence, capabilities, and resources., • Review/approve Engineering Work Packages (e.g. TGIs) related to project., • Review/approve Engineering Change documents (e.g. CRs, LARs, DFSs) related to project., • Review/approve Engineering designs, models, drawings and calculation packages., • Candidate will have to perform in an ISO-9000 rated company in a rapidly changing and demanding atmosphere., • May assist in or lead Bid and Proposal efforts including cost estimating, technical approach definition, and input to baseline schedule data., • May participate in or lead Technical Working Groups to assess and improve processes and capabilities. REQUIRED: • Bachelor's degree in Engineering (Mechanical, Electrical, Ocean or Nuclear) or Naval Architecture from accredited college or university., • Minimum ten (10) years engineering experience in complex systems design, manufacturing, and integration environment., • Demonstrated ability to lead technical groups of more than five engineers, designers, and/or drafters., • Familiarity with ISO 9000 design requirements., • Proficiency in Microsoft Office products and CAD software, such as AutoCAD or SolidWorks or similar packages., • Must be a U.S. citizen who is not a dual citizen of any other country., • Master's degree in related field., • Proficiency in MathCad., • Engineer in Training (passed FE exam)., • Excellent communications and organizational skills., • Understands Finite Element Analysis -particularly Solidworks Simulation or ANSYS Workbench. Working knowledge of both is preferrable., • Must be competent in system engineering methodologies., • Experience performing Dynamic Design Analysis Method (DDAM) is a plus., • Demonstrated knowledge of SUBAFE or SOC requirements is preferred., • Possesses and applies an advanced knowledge of engineering principles and practices in one or more engineering fields., • Possesses a working knowledge of the manufacturing/integration aspects related to one or more technical fields related to MSD efforts., • Demonstrated knowledge of military, and commercial, construction and material specifications applicable to Submarine and Deep Submergence System work. PAY, BENEFITS AND WORK SCHEDULE: We offer a comprehensive and competitive benefits package. Employee benefits vary by role, however, may include Health and Wellness, Mental Health, Retirement Savings, Life and Disability, Paid Maternity and Parental Leave, Paid Time Off, Tuition Reimbursement, and an Employee Assistance Program. All qualified candidates will receive consideration for all positions without regard to race, color, age, religion, sex (including pregnancy), sexual orientation, gender identity,national origin, veteran status,disability, genetic information, or other non-merit factors. Regular full-time employees who apply will be considered along with external candidates. Employees with less than six months with their current position are not eligible to apply for job postings. Please discuss your interest in the position with your current manager/supervisor prior to submitting your completed application. It is highly recommended to apply through the PeopleSoft or Oceanet portals.

Description At Leidos, we deliver innovative solutions through the efforts of our diverse and talented people who are dedicated to our customers’ success. We empower our teams, contribute to our communities, and operate sustainably. Everything we do is built on a commitment to do the right thing for our customers, our people, and our community. Our Mission, Vision, and Values guide the way we do business. Your greatest work is ahead! The Leidos Defense Group has a current opening for a Mechanical Engineer at its light industrial manufacturing site in Chesapeake, VA supporting the US NAVY’s environmental shipboard equipment. This site fabricates electro-mechanical equipment per US NAVY build-to-print drawing packages and supports the customers with spare parts and troubleshooting. The role is full cradle to grave involvement from RFQ (Request for Quote) – quote - award – material/manpower planning – fabrication/delivery schedule – financial reporting- employee oversight to program management oversight reviews/audits in an ISO-9001:2015 environment. Candidates with the qualifications are encouraged to apply immediately. The selected candidate will lead a team of three integrators in Chesapeake, VA and report to the current remote Program Manager. If this sounds like the kind of environment where you can thrive, keep reading! Leidos Defense Group provides a diverse portfolio of systems, solutions, and services covering land, sea, air, space, and cyberspace for customers worldwide. Solutions for Defense include enterprise and mission IT, large-scale intelligence systems, command and control, geospatial and data analytics, cybersecurity, logistics, training, and intelligence analysis and operations support. Our team is solving the world’s toughest security challenges for customers with “can’t fail” missions. To explore and learn more, click ___! Are you ready to make an impact? Begin your journey of a flourishing and meaningful career, share your resume with us today! Primary Responsibilities Include: • Candidate will be the onsite lead for light manufacturing team engaged in all aspects of material, fabrication and quality activities and remotely supported by the program manager., • Interaction with multi-disciplines including contracts, procurement, finance, subcontractors, engineers, and management to develop solid basis of estimates, material procurements, and fabrication schedules to meet customer delivery dates., • Apply engineering expertise to review part obsolescence in build-to-print environment and work with NAVY customer for concurrence., • Provide manufacturing guidance to shop technicians as questions arise (e.g., drawing interpretation, dimension and tolerance issues, inspections)., • Candidate must be a motivated self-starter who is able to multi-task and work within deadlines and must be able to smoothly transition between various projects to solve technical issues., • Must have excellent communication and leadership skills., • Provide accurate task completion estimates., • Assist in material lifecycle including requisitioning, receiving, tracking, releasing, kitting, and shipping., • Also assist with and have input to ISO 9001 objective documents, team training, receipt inspection, shipment documents, certificate of conformances, and review/resolution of material non-conformances., • Support fabrication team administrative functions related to work orders, material releases and shipping documents., • Lead and train technicians in equipment troubleshooting and factory acceptance testing. Responsible for integrity of factory acceptance testing documentation., • Successful candidate will work at the 500 Woodlake Drive, Chesapeake, VA location. Basic Qualifications Required Experience, Skills, and Education: • Minimum of a bachelor’s degree in mechanical or electrical engineering with eight (8) years of professional experience or equivalent combined education/experience., • Capable of being a member of a multi-disciplinary virtual team to pull together material, labor, and subcontractors for fabrication of build-to-print equipment., • Proficiency in reading and understanding drawings including dimensioning and tolerancing, specifications, materials, and processes and electrical schematics. Ability to resolve obsolescence issues and get approval from US Navy customers for drawing deviations or changes., • Willingness to learn unfamiliar equipment and processes., • Proficiency with Microsoft Office tools including Excel, Project and Word and Computer Aided Design (CAD) software, • Exposure to program management, financial reporting and small team leadership. Preferred Qualifications Preferred Experience, Skills, and Education: • Work experience in a light manufacturing environment. Electrical panel fabrication experience a plus., • Exposure to US NAVY shipboard systems, • Experience working in an ISO 9001 quality environment., • Proficiency in troubleshooting and testing of electro-mechanical equipment., • Experience working with US Navy subject matter experts to assist in fleet equipment maintenance and repairs., • Active or current U.S. DoD Secret clearance is a plus but not a requirement. For U.S. Positions: While subject to change based on business needs, Leidos reasonably anticipates that this job requisition will remain open for at least 3 days with an anticipated close date of no earlier than 3 days after the original posting date as listed above. Pay Range $87,100.00 - $157,450.00 The Leidos pay range for this job level is a general guideline only and not a guarantee of compensation or salary. Additional factors considered in extending an offer include (but are not limited to) responsibilities of the job, education, experience, knowledge, skills, and abilities, as well as internal equity, alignment with market data, applicable bargaining agreement (if any), or other law. About Leidos Leidos is an industry and technology leader serving government and commercial customers with smarter, more efficient digital and mission innovations. Headquartered in Reston, Virginia, with 47,000 global employees, Leidos reported annual revenues of approximately $16.7 billion for the fiscal year ended January 3, 2025. For more information, visit ___. Pay and Benefits Pay and benefits are fundamental to any career decision. That's why we craft compensation packages that reflect the importance of the work we do for our customers. Employment benefits include competitive compensation, Health and Wellness programs, Income Protection, Paid Leave and Retirement. More details are available at ___. Securing Your Data Beware of fake employment opportunities using Leidos’ name. Leidos will never ask you to provide payment-related information during any part of the employment application process (i.e., ask you for money), nor will Leidos ever advance money as part of the hiring process (i.e., send you a check or money order before doing any work). Further, Leidos will only communicate with you through emails that are generated by the Leidos.com automated system – never from free commercial services (e.g., Gmail, Yahoo, Hotmail) or via WhatsApp, Telegram, etc. If you received an email purporting to be from Leidos that asks for payment-related information or any other personal information (e.g., about you or your previous employer), and you are concerned about its legitimacy, please make us aware immediately by emailing us at ___. If you believe you are the victim of a scam, contact your local law enforcement and report the incident to the ___. Commitment to Non-Discrimination All qualified applicants will receive consideration for employment without regard to sex, race, ethnicity, age, national origin, citizenship, religion, physical or mental disability, medical condition, genetic information, pregnancy, family structure, marital status, ancestry, domestic partner status, sexual orientation, gender identity or expression, veteran or military status, or any other basis prohibited by law. Leidos will also consider for employment qualified applicants with criminal histories consistent with relevant laws.

Job DescriptionCompany Description Veolia Group is a global leader in environmental services, operating across all five continents with nearly 218,000 employees. Specializing in water, energy, and waste management, Veolia Group designs and implements innovative solutions for decarbonization, depollution, and resource regeneration, supporting communities and industries in their ecological transformation. Within this framework, Veolia's Water Technology Business brings together a dedicated team of experienced professionals committed to tackling the world’s most complex challenges related to water scarcity, quality, productivity, and energy. Together, we pursue a shared mission to create a more sustainable future. Job Description As an ICE (Instrumentation, Controls & Electrical) engineer you will be responsible for supporting the execution of Services projects. Working with the Mechanical Engineering team, the ICE engineer is responsible for the design of the control and automation strategy for the system. Instrumentation & Control design responsibilities include developing the control narrative, control logic charts, PLC program, and drawings including electrical layout and panel drawings. Electrical design responsibilities include completing the electrical design and developing single line diagrams, field wire lists, I/O lists, network architecture, panel design and schematics. ICE engineers provide support to production facilities and assist the Service team through installation and commissioning. Essential Duties and Responsibilities include the following. ● Collaborate in cross-functional project team discussions and client meetings. ● Read and process engineering documents, including P&IDs, GAs, process design. guidelines, Electrical Schematics, I/O Lists, instrument and valve lists, Network Architecture, return of experience, and engineering best practices guides. ● Interpret, comment and follow contract and customer specifications. ● Design the complete detailed control logic for plant operation (Control Philosophy, Control Logic & Sequence Charts) with operator and equipment safety in mind. ● Support EC&I Electrical Control & Instrumentation design of standard products. ● Support of commissioning, testing, and troubleshooting activities. ● Manage budget, scope and schedule and proactively report risks and opportunities to project teams. Qualifications ● Bachelor’s Degree in Electrical Engineering, Mechanical Engineering, Chemical Engineering, or other Engineering Technical degree. Candidates with relevant work experience where candidate has demonstrated the ability to perform the required duties and responsibilities may also be considered. ● > 4 years of experience in the design industrial water treatment systems. ● Understanding of hydraulics and fundamentals of fluid mechanics and basic water chemistry. ● Strong focus on customer relationships (external/internal). Understands balance between customer and Veolia teams. ● Expert in the design of control systems, Programmable Logic Controllers, HMI, SCADA, and programming ● Experience programing Allen Bradley, GE Fanuc, Wonderware, Siemens and/ or other common platforms ● Strong knowledge of equipment and processes related to Veolia WTS Services systems. ● Ability to work in an industrial and manufacturing environment. ● Ability to travel 25% of the time and live in proximity to a major airport. Desired ● Excellent problem-solving abilities. ● Excellent written and verbal communication skills (including coordinating, reporting, documentation, and presentations). ● Proven ability to develop and follow procedures and standards, while extrapolating new concepts from established standards. ● Understanding of basic water chemistry. ● Understanding of Low Voltage Power Distribution System design. ● Understanding of High/ Medium Voltage Power Distribution System design. Salary Range: $80,000 - $110,000 Additional Information At WTS, we realize diverse teams make smarter decisions, deliver better results, and build stronger communities. We’re an organization that champions diversity and inclusion at every rung of the ladder and are proud to be an equal opportunity workplace. Because our people are our greatest assets, we also offer competitive benefits that include: • Health & Life Insurance, • Paid Vacation & Sick Time, • Paid Holidays, • Parental Leave, • 401(k) Plan, • Flexible Spending Accounts, • AD&D Insurance, • Disability Insurance All your information will be kept confidential according to EEO guidelines. As an inclusive company, Veolia is committed to diversity and gives equal consideration to all applications, without discrimination.

Job Description Job Opening: Project Electrical Engineer Job Description Complete Logistical Services is excited to announce a Full-Time job opening for a Project Electrical Engineer. This position, integral to our engineering team, is designed for a professional who thrives in a dynamic, hands-on work environment. It's important to note that this is not a remote position, requiring the successful candidate to collaborate closely with our team on various innovative projects. The job entails working on unique power and control systems primarily for underwater robotic and electromechanical systems. These are tailored solutions, often meeting the challenging requirements of US Navy and other US government Department of Defense customers. As a Project Electrical Engineer, you'll be immersed in an engineering role that spans the entire creative process from concept, analysis, and design through to assembly, integration, troubleshooting, and testing. This role promises a diverse workload – no two projects are the same, ensuring continuous learning and engagement. Candidates are expected not only to excel in electrical engineering but also to actively participate in the physical construction and testing of their designs, embodying our ethos of "making it work!" Duties and Responsibilities • Serve as a system or subsystem lead, responsible for substantial portions of project electrical and control system designs., • Generate actionable designs from high-level, often incomplete requirements with minimal supervision., • Exercise strong technical judgement, creativity, and initiative; anticipate system needs and integrate solutions., • Conduct and participate in regular design reviews to ensure technical thoroughness and integrity., • Work collaboratively with mechanical, software, and systems engineers to architect and materialize functioning systems., • Supervise, mentor, and guide junior engineers or technicians in achieving project goals., • Maintain accountability for results, working independently while knowing when to seek assistance., • Demonstrate a continuous desire to grow technical and leadership skills within and beyond assigned tasks.Requirements, • Bachelor of Science or advanced degree from an accredited university in Electrical/Electronic Engineering or a related field/curriculum with an electrical concentration such as Computer Engineering or Robotics Engineering. Significant commensurate experience may also be considered., • Minimum of 7 years practical technical experience in the electrical engineering field, encompassing the entire engineering process from concept to testing, preferably involving complex electrical, electromechanical, or automated/robotic systems., • Ability to obtain and maintain a United States Government Department of Defense Security Clearance; active clearances are preferred but not required initially., • Must be a US citizen as the position involves work on defense projects subjected to government restrictions.

Job Description Auto-Chlor is now hiring an Electrical Engineer-Equipment Design to lead our engineering development initiatives. We’re looking for a leader who will contribute to our “People First” culture. This position would work in-office full-time at our facility in MEMPHIS, TN. What’s in it for you? RELOCATION ASSISTANCE OFFERED We understand that great talent can come from anywhere. That's why we offer: • Up to 60 days of temporary housing, • Reimbursement for moving and travel expenses, • Support with general relocation needs, • A people first culture where contributions and collaboration are encouraged and celebrated., • A competitive salary up to $150k annually with an excellent benefits package., • Ongoing wellness initiatives to improve your health and well-being. What are some of the day-to-day responsibilities? • Develops and implements solutions for dishwasher and dispensing innovation projects, including both new equipment development and existing equipment innovation. Projects vary in duration from two months to over a year based on Project Brief requirements., • Administers regulatory compliance with agencies such as NSF, CSA, UL, BOCA, ASSE, UPC, and Federal, State, and Local authorities. Provides support to the field sales team on regulatory issues, with an emphasis on maintaining customer equipment operation without disruption to business., • Provides technical support to field sales team, contractors, consultants, engineers, and architects., • Develops and manages technical documentation for design control and field use. Requirements: • Bachelor of Science in Engineering Degree or comparable years of work experience., • 5-10 years of electrical and electronic design experience, along with experience working with regulatory agencies. Experience in the commercial appliance industry is preferred., • Embedded Software/hardware design, • Knowledge of codes and standards for plumbing, sanitation, electrical, and building (NSF, CSA, UL, BOCA, ASSE, UPC, FDA), • Electrical/electronic circuit design, • CAD Modeling – Autodesk Inventor Preferred Location: 746 Poplar Ave Memphis, TN 38105

Job DescriptionCompany Description Veolia Group is a global leader in environmental services, operating across all five continents with nearly 218,000 employees. Specializing in water, energy, and waste management. Veolia Group designs and implements innovative solutions for decarbonization, depollution, and resource regeneration, supporting communities and industries in their ecological transformation. Within this framework, Veolia’s Water Technology Business brings together a dedicated team of experienced professionals committed to tackling the world’s most complex challenges related to water scarcity, quality, productivity, and energy. Together, we pursue a shared mission to create a more sustainable future. Job Description The Principal Process Engineer (PPE) will demonstrate leadership in communicating business goals, technical programs, and process best practice for Veolia fixed facilities. Aligned with business objectives this individual will strategize using their experience and expertise to solve complex production, service, and process challenges. By developing and executing programs they will affect short-term and long-term business goals. The role will require balancing process improvement initiatives, escalated issue resolution, advising on technical matters and capital project support at the facilities. Where needed they may also be asked to help coordinate the installation, set-up, training and overall readiness of new projects or key personnel. We are also open to candidates to work from Houston TX, Norfolk, VA, East Hartford CT, St Peters/St Louis, MO, Arlington TX, Salt Lake UT, Phoenix AZ. Key Characteristics • The Principal Process Engineer role will provide technical leadership and coaching for plants ensuring positive and effective cooperation with cross-functional team members to ensure business objectives around safety, quality, efficiency, and new product developments at plants are met, • Experience in the planning and execution of projects: including project approach and resource needs, options analysis, process and equipment design, engineering document development, and system ownership through the project delivery phases of plan, design, procure, construct, and commissioning, • Areas of expertise could include process experience for complex capital projects within the water and wastewater treatment, and water reuse area including conventional technologies like ion exchange and other advanced water and wastewater treatment processes, • Strong technical leadership, collaboration, and sound business value-based prioritization and problem-solving skills, • Responsible for successful delivery of technical process campaigns to improve operations through technical design, process guidance, operating rate improvement, scrap reduction, ergonomic improvements, tooling and other related plant enhancements, • As Principal Process Engineer, there is broad responsibility to understand business operations, recommend process changes, and develop executable engineered deliverables while coordinating with project and regional teams, • Ability to design/scope, manage and execute plant + equipment capital expenditure projects within budget. Develop detailed technical specifications for RFQ/RFP related to equipment, facility, and conveying purchases and installations, • Drive project planning and controls by developing detailed schedules, cost forecasts, and resource plans, • Captures & maintains all technical specifications/information (including technical & costing models) to produce a Mobile Water Center of Excellence (CoE) ‘knowledge atlas’ helping ensure future business continuity, • Resolves challenges using methodical data driven solutions that involve new techniques, technologies, or concepts, • Analyzes production trends, human resource needs, and customer demand to plan plant enhancement activities, • Confers with management, production, commercial operations and sales staff to determine technical & process engineering feasibility, cost effectiveness, and production capability for new and existing products and plants, • Understands regulations and able to work with state authorities to develop permit strategies., • Maintains a working knowledge of new technologies which may improve operations, and develops recommendations accordingly, • Provides direction and application of company policies and procedures for process & engineering activities, • Support the quality function through all plant integration of ISO / QC documentation, • Uses six sigma methods (DMAIC) and lean manufacturing principles to reduce variation and eliminate waste in the product and associated processesQualifications Required Qualifications: • Bachelor’s Degree in Manufacturing, Mechanical, Industrial Engineering or other applicable degree qualification, • 15+ years of technical or manufacturing or industrial engineering work experience Preferred Qualifications: • Ideally Professional Engineering (PE) and Project Management Professional (PMP) certified, • Ability to utilize lean-manufacturing principles to lead high impact process and quality improvement projects yielding significant reduction in defects and increased productivity in the plants, • Experience with water treatment technologies and specifically Ion Exchange systems, • The role requires the ability to travel domestically up to 30% of the time with occasional need to travel outside of NorAm, • Electrical design ability, • Master’s Degree in relevant fields (Engineering, Water, etc.) is helpful, • Excellent ability to communicate complex ideas and integration of systems. Additional Information Compensation: The salary range is tied to the market for similarly benchmarked roles. The range is not an absolute, but a guide, and offers will be based on the individual candidate’s knowledge, skills, experience, and market conditions, as well as internal peer equity. Depending upon all the preceding considerations for the final selected individual candidate, the offer may be lower or higher than the stated range: $135-147k. At Veolia, we realize diverse teams make smarter decisions, deliver better results, and build stronger communities. We’re an organization that champions diversity and inclusion at every rung of the ladder and are proud to be an equal opportunity workplace. Because our people are our greatest assets, we also offer competitive benefits that include: * Compensation - The salary range is tied to the market for similarly benchmarked roles. The range is not an absolute, but a guide, and offers will be based on the individual candidate’s knowledge, skills, experience, and market conditions, as well as internal peer equity. Depending upon all the preceding considerations for the final selected individual candidate, the offer may be lower or higher than the stated range: $130,000-$140,000 USD annually • Medical, Dental, & Vision Insurance Starting Day 1!, • Life Insurance, • Paid Time Off, • Paid Holidays, • Parental Leave, • 401(k) Plan - 3% default contribution plus matching!, • Flexible Spending & Health Saving Accounts, • AD&D Insurance, • Disability Insurance, • Tuition Reimbursement Disclaimer: The salary, other compensation, and benefits information is accurate as of the date of this posting. The Company reserves the right to modify this information at any time, subject to applicable law. Applicants are required to be eligible to lawfully work in the U.S. immediately; employer will not sponsor applicants for U.S. work authorization (e.g. H-1B visa) for this opportunity Veolia does not accept unsolicited resumes from external recruiting firms. All vendors must have a current and fully executed MSA on file before submitting candidates. Any unsolicited resumes and candidate profiles will be deemed the property of Veolia, and no fee will be due. As an inclusive company, Veolia is committed to diversity and gives equal consideration to all applications, without discrimination. As an inclusive company, Veolia is committed to diversity and gives equal consideration to all applications, without discrimination.

Job Description ABOUT US: Air Conditioning Equipment Sales (ACES) has more than 45 years of experience providing innovative heating, ventilating and air conditioning (HVAC) solutions to building owners and contractors. ACES has the industry-leading expertise to support the life cycle of commercial HVAC systems, from selecting and sourcing to service and replacement. With a focus on innovation, the company works with customers to: -Improve building comfort -Increase efficiency -Reduce total cost of ownership ACES represents many of the most innovative HVAC equipment and building automation system manufacturers serving the technology, healthcare and educational markets. The company’s experienced sales engineers, service technicians, training staff and relationships with industry organizations and owners, engineers and contractors have established it as a key partner for any commercial HVAC project. ACES is a fast-paced and growing company looking for talented, innovative professionals who want to be part of a future focused team that provides high quality solutions that make sense to its customers and communities, both financially and environmentally. If you are bright, driven, and customer oriented, then you belong at ACES. SUMMARY A successful Sales Engineer is responsible for developing long-term customer relationships and maximizing account penetration and customer retention with contractor, consulting engineer/architect and owner accounts. The Sales Engineer role in the New Equipment Sales team provides innovative HVAC solutions across a portfolio of industry-leading equipment. ACES represents some of the most innovative HVAC equipment manufacturers and acts as a key partner on commercial HVAC projects. We represent leading manufacturers in every category of commercial heating, ventilating, air-conditioning equipment and controls. This position can be based out of Richmond, VA or Hampton, VA. ESSENTIAL FUNCTIONS AND RESPONSIBILITIES include the following: • Utilizes Account management process to identify key customers and to develop specific action plans to grow identified accounts., • Identifies potential opportunities with existing and new customers., • Collects project data and compares to the office’s capabilities., • Converts leads into opportunities by assigning the appropriate sales process, identifying the required project team members, making assignments, and communicating the next steps in the process., • Develops relationships with multiple buying influences in the customer’s organization., • Gathers and validates preliminary information and performs facility walk-through, construction plan review or other requirements., • Determines project needs, constraints, and responsibilities to meet all of the customer’s HVAC system design and installation requirements., • Develops, evaluates, and discusses possible solutions with customer., • Develops preliminary project fulfillment schedule., • Responsible for project take-off, selection, pricing, and integration of equipment, controls, and services., • Responsible for the preparation and review of the proposal., • Validates the preliminary proposal with customer., • Determines proposal price and selling strategy., • Reviews and compares contract terms and conditions with ACES contract standards., • Presents the proposal and negotiates price, terms, and conditions with customer., • Follows up with buying influences., • Prepares transition documents and communicates project readiness for assignment to operations team., • Resolves major deviations from scope with team after Project Scope Validation., • Determines needs, develops and executes an account specific business plan to identify the long term, mutual support requirements required to facilitate a strong, profitable and successful partnership., • Provides total account business activity reports and annual forecasts., • Provides knowledge and consultation in the form of developing HVAC system related solutions for the customer’s problems, including financial and performance-based considerations., • Consistently ascertains customer needs and current market opportunities. Assembles, coordinates and interacts with sales team as needed for customer penetration and project acquisition., • Coordinates with consulting engineers in writing project specifications., • Coordinates with Estimators in the interpretation of specifications and preparation of proposals. SUPERVISORY RESPONSIBILITIES This position does not have direct supervisory responsibility. The position may be provided internal support. QUALIFICATIONS include the following: • Bachelor’s degree in Electrical/Mechanical Engineering, Construction or Engineering Technology, or other related areas., • Excellent oral/written communication skills., • Well developed presentation skills., • Excellent customer relations skills., • Marketing & market planning knowledge., • In-depth knowledge of HVAC industry., • Ability to travel at least 20% of the time., • Ability to function independently and deliver results. PHYSICAL DEMANDS The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. While performing the duties of this job, the employee is regularly required to sit; use hands to finger, handle, or feel; reach with hands and arms; and talk or hear. The employee is frequently required to stand and walk. The employee must occasionally lift and/or move up to 10 pounds. WORK ENVIRONMENT The work environment characteristics described here are representative of those an employee encounters while performing the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. The noise level in the work environment is usually quiet. DECLARATION Human resources retain the sole right and discretion to make changes to this job description. Any employee making changes unauthorized by the president or human resources will be subject to disciplinary action up to and including termination. s

Job DescriptionJob Title: Utilities Project EngineerLocation: Norfolk, VA areaHire Type: Direct-Hire, OnsiteTravel Requirement: $7,500)Benefits: PTO, paid holidays, medical/dental/vision plans, 401(k), relocation assistanceMust-Have Skills: • Utilities project engineering in a manufacturing environment, • Industrial refrigeration (ammonia), wastewater systems, and other utilities., • Project management (cradle-to-grave execution), • AutoCAD proficiency, • Vendor and contractor managementJob Summary:The Utilities Project Engineer supports multiple manufacturing facilities by leading and executing capital projects related to industrial refrigeration and utility systems. This role focuses on system design, optimization, and compliance, while partnering closely with plant teams, engineering, and PSM leadership. The ideal candidate brings hands-on ammonia refrigeration experience and can manage projects from concept through completion across a multi-site environment.Job Duties:, • Support multiple manufacturing facilities with refrigeration and utilities engineering projects, • Lead projects from concept through execution, including design, budgeting, and implementation, • Develop equipment specifications, obtain quotes, and coordinate installation schedules, • Troubleshoot and resolve issues related to industrial refrigeration systems, • Partner with plant teams and PSM leadership to ensure regulatory compliance, • Perform system analysis (load, charge, relief calculations) to optimize performance, • Manage contractors and vendors to ensure successful project delivery, • Assist with capital planning and continuous improvement initiatives, • Research and support implementation of new technologiesQualifications:, • Bachelor’s Degree in Engineering or related field (or equivalent experience), • 2+ years of relevant engineering experience in manufacturing, • Hands-on experience with ammonia/industrial refrigeration systems, • Industrial refrigeration certification is required (RETA CIRO, ANSI/IIAR2, etc.), • Proven ability to manage full project lifecycle (cradle-to-grave), • Experience with project budgeting and financial tracking, • Strong understanding of utility systems and plant infrastructure, • Proficiency with AutoCAD, • Ability to travel ~50% (2–3 days/week, occasional extended trips) is required, • Experience in food or protein manufacturing is preferred, • Electrical troubleshooting experience (motors, controls, circuits) is preferred, • Wastewater systems experience is preferred Qualified applicants will receive consideration for employment without regard to race, color, age, religion, sex, sexual orientation, gender identity, national origin, disability, protected veteran status, or genetic information.

Job Description Founded in 1995, ESN is a Small Disadvantaged Business (SDB), Service-Disabled Veteran-Owned Small Business (SDVOSB) and Veteran Owned Small Business (VOSB). ESN delivers trusted solutions that support our nation's defense. For more than two decades, we have been providing our military and government customers with mission-critical services including engineering and technical support, strategic and program management, testing and evaluation, operations support, and information technology. We are committed to proven, repeatable corporate quality management processes and are certified CMMI Maturity Level III - Development/Services & ISO 9001:2015. Candidates may be located within a 30-mile radius of any NIWC LANT Lab facility (Norfolk, DC area, Charleston, or NOLA.) ESN is seeking a Software Engineer II - Python Developer to support a contract with Naval Information Warfare Center (NIWC), Atlantic, in Norfolk, VA. The contract to support NIWC LANT consists of Independent Validation & Verification, Operations, Sustainment, and Installation support. The Maintenance Figure of Merit (MFOM) systems provide near real-time material-based readiness reporting to the Defense Readiness Reporting System-Navy (DRRS-N) and provides three additional primary capabilities to the Fleet including Ashore and Afloat systems. This support includes Cybersecurity, automated software testing, Scrum Master support, operating in the AWS Cloud, management of JIRA/Confluence, and project support. Position Description: • Developing automated software test suites using Python., • Schedule is Monday through Friday with some weekend support required., • Required Education: Bachelor's degree in quantitative field such as engineering or mathematics (e.g. Electrical Engineering, Computer Engineering, Computer Science, Information Technology, or Information Systems), • Required certification - Security Plus and Agile Developer certification or Certified Scrum Developer certification (Preferred certification includes International Software Testing Qualifications Board (ISTQB))., • Three (3) years of professional experience with research, design, and development of computer and network software or specialized utility programs which may include database maintenance within an application area. Individual shall have experience applying programming concepts in a professional or academic setting and notable experience with applying modern software development methodologies (e.g. agile, DEVOPS/DEVSECOPS) in a professional or academic setting, • Specific Experience - Three (3) years' experience in Independent Verification and Validation (IV&V) software testing. Three (3) years' experience in developing automated software tests. Two (2) years' experience in Agile Scrum Master training. Active DoD Secret Clearance Required Job Posted by ApplicantPro

Job Description Complete Logistical Services is excited to announce an opening for a Staff Electrical Engineer. This full-time position offers an exceptional opportunity to be a part of our dynamic team, engaging in a variety of challenging projects that involve innovative engineering solutions. Situated within our Aerospace and Defense Technologies (ADTECH) division—an engineering center of excellence, this role is critical in supporting our mission to overcome some of our customers' toughest challenges. The selected candidate will play a crucial role in the development and implementation of complex power and control systems for unique underwater robotic and electromechanical systems, primarily serving U.S. Navy and other Department of Defense clients. This position is not remote and requires hands-on participation in both the design and execution phases of the project lifecycle. By joining our team, you will work on novel projects that promise new and exciting challenges every day, ensuring that your professional skills are continuously engaged and expanded. Duties and Responsibilities • Lead the design and development of electrical and control systems as part of large-scale projects., • Supervise, mentor, and lead teams of electrical engineers to achieve project goals., • Translate high-level project requirements into detailed designs autonomously, with minimal supervision., • Demonstrate creativity and technical excellence in every stage of problem-solving and system construction., • Actively participate in regular design review meetings to ensure quality and adherence to specifications., • Collaborate effectively with mechanical, software, and systems engineers to design and realize integrated, functional systems., • Provide guidance and mentorship to junior engineers and technicians where necessary., • Maintain responsibility and accountability for personal and team results, operating with substantial autonomy., • Engage in the hands-on assembly and testing of electrical systems, embodying our principle of “making it work”., • Constantly seek opportunities to expand personal knowledge and skills in engineering and leadership.Requirements, • Bachelor of Science or advanced degree from an accredited university in Electrical/Electronic Engineering, Computer Engineering, Robotics Engineering, or a related field with an Electrical concentration., • At least 10 years of practical, technical experience in electrical engineering, encompassing concept development, system design, analysis, simulation, integration, and testing., • Ability to obtain and maintain a United States Government Department of Defense Security Clearance; active clearances are preferred but not required before employment., • Must be a U.S. citizen to comply with government contractual obligations., • Proven capability to lead and mentor a team, fostering a collaborative work environment., • Outstanding technical judgment and attention to detail, with a systematic approach to problem-solving., • Experience in designing control systems for automated or robotic systems is highly desirable., • Demonstrated ability to work well with cross-functional teams and communicate effectively with various engineering disciplines., • A readiness to handle unforeseen challenges with a proactive, problem-solving attitude., • Keen interest in taking on increased responsibilities and growing within a globally recognized enterprise.

Job Description Founded in 1995, ESN is a Small Disadvantaged Business (SDB), Service-Disabled Veteran-Owned Small Business (SDVOSB) and Veteran Owned Small Business (VOSB). ESN delivers trusted solutions that support our nation's defense. For more than two decades, we have been providing our military and government customers with mission-critical services including engineering and technical support, strategic and program management, testing and evaluation, operations support, and information technology. We are committed to proven, repeatable corporate quality management processes and are certified CMMI Maturity Level III - Development/Services & ISO 9001:2015. Candidates may be located within a 30-mile radius of any NIWC LANT Lab facility (Norfolk, DC area, Charleston, or NOLA.) ESN is seeking a Software Engineer III - Python Developer to support a contract with Naval Information Warfare Center (NIWC), Atlantic, in Norfolk, VA. The contract to support NIWC LANT consists of Independent Validation & Verification, Operations, Sustainment, and Installation support. The Maintenance Figure of Merit (MFOM) systems provide near real-time material-based readiness reporting to the Defense Readiness Reporting System-Navy (DRRS-N) and provides three additional primary capabilities to the Fleet including Ashore and Afloat systems. This support includes Cybersecurity, automated software testing, Scrum Master support, operating in the AWS Cloud, management of JIRA/Confluence, and project support. Position Description: • Developing automated software test suites using Python., • Schedule is Monday through Friday with some weekend support required., • Required Education: Master's or Bachelor's degree in quantitative field such as engineering or mathematics (e.g. Electrical Engineering, Computer Engineering, Computer Science, Information Technology, or Information Systems)., • Required certification - Security+, Agile Developer certification or Certified Scrum Developer certification, and International Software Testing Qualifications Board (ISTQB)., • Ten (10) years with Master's or fourteen (14) years with Bachelor's degree of professional experience with research, design, and development of computer and network software or specialized utility programs which may include database maintenance within an application area. Individual shall have experience applying programming concepts in a professional or academic setting and notable experience with applying modern software development methodologies (e.g. agile, DEVOPS/DEVSECOPS) in a professional or academic setting., • Specific Experience - Three (3) years' experience in Independent Verification and Validation (IV&V) software testing. Three (3) years' experience in developing automated software tests. Two (2) years' experience in Agile Scrum Master training. Active DoD Secret Clearance Required Job Posted by ApplicantPro

Job Description WORK LOCATION FOR THIS JOB WILL BE IN YOKOHAMA, JAPAN About U. S. Marine Management A key player in the maritime industry, USMMI expertly manages a diverse fleet of ships. Our expertise implementing maritime contracts, makes us a pivotal force in global commerce and government operations, notably with the U.S. Military Sealift Command and the U.S. Maritime Administration’s Tanker Security Program (TSP). As a Jones Act qualified company, we adhere to the highest U.S. shipping standards. USMMI also operate a variety of non-Jones Act qualified ships. Our specialized capabilities in ship design, project management, and conversion allow us to provide tailored and innovative solutions that address the dynamic needs of our clients with precision and efficiency. U.S. Marine Management, LLC (USMMI) is providing support to the U.S. Army Pre-Positioned Stock Four (APS-4) Watercraft/Modular Causeway System (MCS) Care of Supplies In Storage (COSIS), Exercise and Maintenance program located at the Watercraft Equipment Base – Yokohama North Dock (WEB-YND) in Yokohama, Japan, in order to support Military and Humanitarian actions worldwide. Position Description Purpose/Summary: The Fault Engineer will act as task organizer for the two Fault Repair Team’s activities and interface with the Maintenance Supervisor - COSIS, Fault Repair Technicians, Field Level Maintenance personnel and identified external contractor workforce performing below sustainment level Over and Above fault repairs. The Fault Engineer will provide directives and guidance to the Fault Repair Technicians in managing the fault repair teams and execution of prioritized vessel fault tasks. The Fault Engineer identifies faults through the Global Combat Support System – Army (GCSS-Army) database and DA Form 2404s and organizes the daily crew and organizational level maintenance to be performed on all assigned (APS-4) Watercraft/Modular Causeway System (MCS) and pieces of Army Pre-positioned equipment. The Fault Engineer will maintain records and reports for all repairs and maintenance. He is directly responsible for the development of fault projections report documentation, and the fault actual performed documentation as required for contract execution. Key Responsibilities: • Responsible to the Maintenance Supervisor – COSIS to direct, coordinate and monitor, daily, Fault Repair Technicians and teams, ensuring performance and compliance with safety, environmental requirements, identified fault repair schedules and adhere to projected costs as outlined by the General Manager and Maintenance Supervisor - COSIS., • Required to perform and execute hands on troubleshooting and maintenance requirements up to and including Air Conditioning and Refrigeration (AC & R) maintenance and repairs, electrical/electronic repairs, engine repairs, pipe repairs, motors and pump repairs, deck equipment repairs etc. without supervision or directive., • Oversee maintenance activities of subcontractor/vendors for unplanned and planned maintenance requirements for tasks Over and Above COSIS and below the sustainment level identified repairs for APS-4 Army Watercraft and Equipment, • Advise Maintenance Supervisor – COSIS of the status of the work in progress, material availability and any potential problems and recommend corrective action measures to ensure that personnel, equipment, material and services are provided as needed, • Provide status on repair schedules, cost adherence, required records and data associated with the execution of the maintenance performed on all Watercraft/MCS, • Develop and maintain COSIS Specific maintenance documentation in accordance with Performance Work Statement requirements as directed by the Maintenance Supervisor - COSIS, • Perform upload of maintenance data into the Global Combat Support System – Army (GCSS-Army) database, provide job sheets from GCSS-Army for maintenance tasks, and perform management of fault repairs in accordance with GCSS-Army, Technical Manuals (TMs), Army Regulations (ARs), Technical Bulletins (TBs) & Department of the Army Pamphlets (DA PAMs), • Research and provide parts ordering documentation for ordering through GCSS – Army and Local Purchasing from vendors, • Will perform tasks as requested and when requested by the General Manager or the Maintenance Supervisor – COSIS in support of COSIS operations that may be outside of normal daily requirements, • Perform additional duties and achieve additional certifications in support of COSIS Operations as requested and appointed by the COSIS General Manager, • Required to perform the duties of Chief Engineer while underway/performing sea trials of all Army Watercraft on site Education and Experience • Army Watercraft experienced Warrant Officer with 5 - 10 years of Army Watercraft maintenance experience, able to obtain/reinstate and maintain a U.S. Army Chief Engineer 881A2 License or hold a current USCG (Motor, 5000Hp or greater) Merchant Mariner/Chief Engineer License Technical Skills and Competencies Required • MS Office Suite (Word, PowerPoint, Excel), MS Outlook, web applications, and document publishing applications (preferable), • Excellent written and oral communication skills, and he/she must be adaptive and flexible in meeting the needs of the business., • Supports commitment to safety and other selected company standards and certifications, • USMMI is a drug-free work environment and requires employees to take random drug tests during their employment with the company., • U.S. Marine Management, LLC Values, • U.S. Marine Management, LLC Operations/Structure, • Applicable USMMI systems and processes, • ISM / ISO Certifications – Trends & Requirements, • Applicable Regulatory Requirements and trends, • Influencing, • Conflict resolution and Negotiation, • Team Management, • Analysis and Problem Solving The physical demands and work environment characteristics described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodation may be made to enable individuals with disabilities to perform the essential functions. Typically, the employee will be required to split time between a general office setting and working on board U.S. Army Class A, B and C watercraft and Modular Causeway Systems, performing sea trials, dock trials and vessel equipment maintenance and operational checks. Vessel work will require employees to wear hearing protection due to high noise decibels. Vessel climates change with the seasons and the employee may be in varying temperatures requiring various protective clothing. Employees will be required to work outside on vessels performing checks and repairs, which may be during inclement weather, requiring the wear of rain gear and safety items. In the office setting the employee may sit comfortably to perform the work, usually at a computer terminal – with short breaks or lunch period. Day-to-day requirements will require some bending/stooping, reaching above shoulder level, walking; standing; carrying of light items such as parts, equipment, papers, books or packages of up to 25 pounds. You should be able to hear & speak clearly using phone / headset to communicate with customers; be able to navigate, view & enter information on the computer.

Job Description Ghostrock, a subsidiary of Three Saints Bay, LLC, and a Federal Government Contractor industry leader, is seeking an Engineer III to join our team in Norfolk, VA. Position Responsibilities: • Ability to complete assigned tasks and to update government reps of any issues or concerns for further discussions and/or resolution., • Ability to independently plan and execute assignments, conferring periodically with the SME to keep him/her briefed on status of work and to discuss unusual technical problems. Completed work is reviewed for adequacy and conformance with established policies, precedents, and sound engineering concepts and usage., • Ability to Identify and resolve problems in each of the following areas: Hull, Electrical, Mechanical, Piping, Structural, Shipboard Hull, Electrical and Mechanical (HM&E). Provide recommendations to MARMC Code 900 SME/Manager for concurrence and approval., • Ability to diagnose, test, or analyze the performance of electrical components, assemblies, or systems., • Make, develop, and track trade specific training and programs. Provide recommendations to MARMC Code 900 SME/Manager for concurrence and approval., • Ability to provide technical guidance, and check drawings, memoranda, tests, reports, material requests and other documents, for technical adequacy and conformance with procedures., • Ability to establish and maintain objective quality evidence in support of Continuous Process Improvement efforts to improve technical products., • Ability to apply a variety of methods, procedures, and techniques to layout, install, align, overhaul, repair, and maintain numerous types of marine machinery, equipment, and systems that are technically more complex., • Ability to examine and troubleshoot to determine the extent of repairs required, materials, or parts needed, and to estimate the time required to complete repairs. Independently diagnose, plan, and complete projects or work orders involving major systems in their entirety., • Compile and maintain records documenting engineering schematics, installed equipment, installation or operational problems, resources used, repairs, or corrective action performed., • Ability to set up and operate standard or specialized testing equipment., • Review installation or quality assurance documentation., • Participate in training or continuing education activities to stay abreast of engineering or industry advances in Naval Ship Systems., • Train shipboard personnel to perform standard maintenance., • Confer with engineering staff and other personnel to resolve problems., • Draft working drawings or cross-sections of underground cables, as required for instructions to installation crew., • Ability to measure factors that affect installation and arrangement of equipment, such as distances to be spanned by cabling and piping., • Ability to assemble documentation packages and produce drawing sets which are checked by a higher authority., • Ability to review drawings and cost estimates for accuracy and conformity to standards and Ability to explain drawings to production or construction teams and provide adjustments as necessary. Supervise and train other technicians., • Ability to apply knowledge and skills gained through practical experience in the construction trades crafts, formal training to perform engineering design and cost estimates for ship maintenance, repair, new construction, alterations, civil, electrical, mechanical systems and equipment., • Ability to plan, develop, implement, coordinate and administer repair and construction projects generated by work requests, including the determination of scope of work, preparation of cost estimates, execution of original design concepts, preparation of detail drawings, preparation of technical requirements, contract preparation, and project administration. Provide recommendations to MARMC Code 900 SME/Manager for concurrence and approval., • Ability to make field investigations to ascertain existing conditions, to confirm customer requirements and to identify special problems and their solutions., • Obtain additional information from personal observation of the job site and coordinate with the customer., • Inspect, survey, and monitor equipment to determine long and short range maintenance requirements., • Collaborate with production control to schedule jobs and ensure that the necessary material and equipment are obtained to complete projects in a timely manner., • Prepare inspection reports noting deficiencies and any deviations from the original estimate and/or specifications., • Provide recommendations to MARMC Code 900 SME/Manager for concurrence and approval. Position Requirements: • Must be a U.S. Citizen, • Must be able to obtain an Active Secret Clearance, • Minimum High School Diploma and six (6) years of full-time hands-on technical experience in the repair of shipboard systems/equipment, • Minimum of two (2) years full time hands-on technician experience in assembly, overhaul, repair, modification, operation, troubleshooting, and maintenance of shipboard systems and equipment., • Basic understanding of the Joint Fleet Maintenance Manual (JFMM) as related to ship repair and maintenance. Practical knowledge of Automated Work Request (AWR) write ups of structural, mechanical and electrical engineering concepts practices, regulations, policies, precedent, methods, and techniques., • General knowledge of work package procedures, blueprints reading, drawings and Navy ships technical manuals to verify technical characteristics of part numbers and required materials for ship maintenance and repairs., • General knowledge in the use of computer hardware and software programs required in the performance of assigned duties i.e. Microsoft Office, Excel and PowerPoint. Ability to analyze procedures and process in executing ship maintenance. This position is located in Norfolk, VA. To apply: VEVRAA Federal Contractor Three Saints Bay, LLC and its subsidiaries offer a diverse, team-oriented working environment and the opportunity to work with exceptional dedicated industry professionals. We offer our employees a comprehensive benefits package and the opportunity to take part in exciting projects with government and commercial clients, both domestic and international. We are an EEO/AA employer. We invite resumes from all interested parties without regard to race, color, religion, creed, gender, national origin, age, genetic information, marital or veteran status, disability, or any other category protected by federal, state, or local law.

Job Description Our company is looking for a Principal Engineer to join our Engineering team and work as a Senior member of the team reporting to Director of Engineering. Responsibilities As a Principal Engineer, you will: • Study, research and analyze customer specifications, and other data to assist in creating machine layout., • Lead the creation, review, and submittal bid packages., • Take customer specifications and translate them to actionable Functional Design Specification (FDS) so the engineering team can execute the design., • Assist Director of Engineering with sales presentations, • Consult with sales to communicate customer needs to our engineering team, • Provide technical support and expertise to sales & customers, • Monitor projects for accuracy and quality from conception to Implementation., • Vet, document, and close technical queries (TQ’s), change orders (CO’s), and project milestones., • Adapt existing equipment to specific job applications., • Shares technical information across the company., • Adhere and contribute to internal policies, procedures, and standards., • Review engineering deliverables and initiate appropriate corrective actions, • Applies knowledge of engineering principles to specify products used on maintenance of way equipment for the railroad industry., • Throughout development of the machine, the Principal Engineer works with design engineers to drive integration of all design elements. (Mechanical, Electrical, Fluid Power, & Software), • Plans, schedules, and coordinates the preparation of structural drawings to meet deadlines., • Keeps informed of new methods and practices in system designs and components., • Analyzes test data and reports to determine if design meets functional and performance specifications., • Evaluates engineering test results for application to developments of systems or other uses., • Familiar with a variety of the field's concepts, practices, and procedures used in the field of maintenance of way type of equipment. A.R.E.A., AAR., • May require some traveling to customer job site to evaluate problems and report back to management with findings, • Relies on experience and judgment to plan and accomplish goals., • A wide degree of creativity and latitude is expected.Requirements, • Bachelor's degree in Mechanical Engineering, • Must have at 6-8 years of experience in mechanical/machine design., • Proficient with Microsoft Office Suite and a CAD program (Autodesk Vault, Inventor & AutoCAD Preferred), • Excellent written and verbal communication and presentation skills., • Exceptional customer service and interpersonal skills, • Superb collaboration and communication, • Familiar with methods of heavy machine manufacturing., • The individual also must be able to think practically and authoritatively, able to accommodate the company's deadlines, budget, and other resources to make informed decisions for their projects., • Knowledge of the current ISO and ANSI (Y14) standards., • Experience in the Rail Industry (Specifically Maintenance-of-Way), • Familiarity with rules, regulations, best practices and performance standards of the rail industry, • Ability to work with multiple discipline projects, • Project management, • Relevant training and/or certifications as a Principal Engineer, • Knowledge of engineering concepts including electrical/electronics, mechanics, hydraulics and pneumatics, • Excellent analytical and problem-solving abilities, • Prolonged periods sitting at a desk and working on a computer., • Must be able to lift 25 pounds at a time., • Must be able to access and navigate all areas of the industrial facility. We may use artificial intelligence (AI) tools to support parts of the hiring process, such as reviewing applications, analyzing resumes, or assessing responses. These tools assist our recruitment team but do not replace human judgment. Final hiring decisions are ultimately made by humans. If you would like more information about how your data is processed, please contact us.

Job Description Job Title: Technical Electrical Estimator Brite Electric Norfolk, VA Preconstruction & Estimating Department Reports to: Director of Contracts Employment Type: Full-Time Job Summary As a Technical Electrical Estimator at Brite Electric, you will aid the preconstruction process by preparing accurate, detailed, and competitive estimates for electrical projects across federal, commercial, and industrial markets. You will leverage your deep knowledge of electrical systems, construction means and methods, and market pricing to deliver proposals that balance profitability and client satisfaction. Your role is critical to helping Brite Electric secure work that aligns with our strategic goals and builds on our reputation for delivering quality, safety, and innovation. Key ResponsibilitiesEstimating & Preconstruction • Prepare detailed and accurate estimates for electrical projects, including material, labor, equipment, and subcontractor costs., • Support conceptual, schematic, design development, and final estimate efforts., • Analyze drawings, specifications, RFPs, and addenda to determine scope of work., • Develop quantity take-offs using digital tools and industry-standard software., • Review subcontractor and supplier proposals to ensure scope completeness and accuracy., • Work closely with the Director of Contracts , Project Managers and Lead Production Engineer to ensure accurate scoping, constructability, and alignment of estimates., • Collaborate with Procurement to secure accurate supplier and subcontractor pricing., • Analyze project risks and prepare contingency plans within estimates., • Ensure estimates align with company profit goals and market competitiveness., • Track historical cost data and maintain an updated database of labor, equipment, and material pricing., • Minimum 3-5 years of experience as an Electrical Estimator in commercial, federal, or industrial construction., • Strong understanding of electrical systems, codes, and construction sequencing., • Proficiency with estimating software (such as Accubid, Trimble, McCormick, or similar) and Microsoft Excel., • Strong analytical skills with the ability to interpret technical drawings and specifications., • Excellent communication and negotiation skills., • Bachelor’s degree in Electrical Engineering, Construction Management, or related field (or equivalent experience)., • Experience in federal/Davis-Bacon projects and large-scale commercial/industrial projects., • Familiarity with Spectrum ERP or other construction management software., • Competitive salary, • Comprehensive benefits package: health, dental, vision, life, disability, and 401(k) with employer match., • Fully paid continuing education and professional development opportunities., • A collaborative team culture that values safety, excellence, and growth., • The opportunity to shape the future of a leading electrical contractor in the Mid-Atlantic.

Job Description Submarine Sensors / Instrumentation Systems Engineer Company Overview: KMS Solutions, LLC is a technical management / solutions company that specializes in engineering, analysis, and cyber security. Founded in 2005, KMS is a certified small business with nearly two decades of experience supporting the Department of Defense as well as many other departments and programs critical to our Nation’s security and well-being. KMS is a three-time winner of the USA Today Top Workplaces recognizing quality workplace cultures across the United States who put their employees first. Additionally, we have received multiple Regional Top Workplace awards and Culture Excellence Awards for Compensation & Benefits, Innovation, Leadership, Purpose & Values and Work-Life Flexibility. Position Summary / Objective: NSWCPD is seeking an experienced U.S. Navy submarine senior enlisted or civilian submarine system maintenance technician to provide an operational perspective to submarine maintenance and support issues. The ideal candidate will leverage their hands-on experience with submarine sensors, gauges, and instrumentation to support critical fleet modernization and maintenance efforts and assist in resolving material obsolescence issues. Essential functions: Reasonable accommodations may be made to enable individuals with disabilities to perform these essential functions. • Work with commercial vendors to find form, fit, and function replacements for obsolete submarine sensors, gauges, and instrumentation., • Review and provide input on TEMPALTs (Temporary Alterations)., • Assess new construction commitments for operational feasibility., • Analyze and support the development of Engineering Change Proposals (ECPs)., • Review and refine Planned Maintenance System (PMS) procedures. Required education and experience: • Bachelor's degree in Engineering from an accredited university or Maritime Academy., • Seven (7) years of experience with U.S. Navy systems, including mechanical / electrical system design, repair, installation, modification, operation, maintenance, troubleshooting, and testing of Submarine equipment or systems., • Must be a former U.S. Navy submariner or civilian submarine maintenance technician with knowledge/experience in sensors, gauges, and instrumentation., • Strong understanding of submarine operations and maintenance. Preferred education and experience: • Prior NAVSEA activity experience., • Understanding of the ECP process. Competencies: • Proficiency in Microsoft Office, specifically, Word, Excel, PowerPoint, and Outlook software., • Excellent verbal and written communication skills, as well as presentation skills., • High comfort level working with and around all military/organizational levels, clients, customers, suppliers, and visitors., • Must be highly reliable and demonstrate personal initiative to operate in a fast-paced environment with changing priorities. Additional eligibility requirements Work authorization/security clearance requirements: An active DoD Secret security clearance. Other Duties: Please note this job posting is not designed to cover or contain a comprehensive listing of activities, duties or responsibilities that are required of the employee for this job. Duties, responsibilities, and activities may change at any time with or without notice. Supervisory Responsibility: None Work Environment: This job operates in a professional office environment. This role routinely uses standard office equipment such as computers, phones, and photocopiers. Physical Demands: The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. While performing the duties of this job, the employee is regularly required to talk or hear. Excellent listening skills are essential. The employee frequently is required to stand, walk, use hands to finger, handle or feel, and reach with hands and arms. Must be able to lift up to 20 lbs. Position Type/Expected Hours of Work: The typical workday is eight hours in length. Some flexibility in hours is allowed, with concurrence from the supervisor. Attendance at prescheduled mandatory meetings is required. Must be available during the core work hours as determined by your contract/location and must account for the required number of hours in a pay period to maintain Full-time status. Telework: • Telework may be allowed up to 100% (fully remote) depending on customer. requirements and the employee’s location and experience. Travel: • Ability to travel CONUS., • Travel up to 10% may be required. Benefits and Additional Compensation: KMS offers a competitive benefits packaging including medical, dental and vision insurances, flexible spending account, PTO, paid holidays, military leave, bereavement leave, 401k / retirement savings plan, professional development and tuition reimbursement, basic and voluntary life insurance / AD&D, short-term and long-term disability, voluntary AFLAC supplemental insurance products and employee assistance plan (EAP) program. Additionally, KMS offers employee referral bonuses and a discretionary annual bonus. AAP/EEO Statement: KMS Solutions provides equal employment opportunities to all employees and applicants for employment and prohibits discrimination and harassment of any type without regard to race, color, religion, age, sex, national origin, disability status, genetics, protected veteran status, sexual orientation, gender identity or expression, or any other characteristic protected by federal, state, or local laws. This applies to all terms and conditions of employment, including recruiting, hiring, placement, promotion, termination, layoff, recall, transfer, leaves of absence, compensation, and training. KMS Solutions is a drug free workplace. #ZR #LI-KMS #LI-HYBRID

Job DescriptionDescription: The Instrumentation/Controls Technician tests, calibrates, and repairs electrical, mechanical, electromechanical, and electronic measuring, recording, and indicating instruments and equipment for conformance to established standards, and assists in formulating calibration standards by performing the following duties. Role and Responsibilities • Diagnose and repair complex control system malfunctions requiring extensive knowledge of a variety of electronic or digital controls systems., • Troubleshoot and repair controls hardware including controllers, relays, measurement devices, actuators, etc., • Assists staff in design and development of products, systems, processes, and/or equipment b analyzing technical problems and working closely with customer specifications. Involves third party vendors and suppliers in the quoting process as required., • Assists Application Engineer in the electrical engineering; primarily supporting the design and development stages., • Communicate with personnel on a daily basis to review production and quality metrics and discuss any issues or concerns from the previous day., • Calibrate Inspection, Measurement, and Test Equipment (IM & TE) in order to ensure compliance with published specifications in one of the following disciplines: electrical, dimensional, optical, physical/mechanical and chemical., • Collect, compile, measure, summarize, and record data gathered during calibration., • Identify IM & TE out-of-tolerance conditions and perform corrective action via adjustments, component replacement, correction factors, etc., • Identify and correct measurement errors, as applicable., • Prepare calibration reports and certificates., • Assist with onsite electrical work (troubleshoot, repair, install) as needed., • BS degree in Engineering/Technical studies, military technical school, or equivalent work experience or 5+ years of controls experience in programming development, start up, and commissioning of complex systems - central plants, air handling units, and evaporative cooling/humidification systems., • Knowledgeable in basic electronics and computers., • Strong math skills., • Must be able to pass a pre-employment drug screen. It is SCI’s policy to require safe operations and practices from all employees and to ensure our management team focuses on maintaining a safe working environment even while working in hazardous work environments. • Approved Class B hard hat in required areas and locations, • Non-conductive PPE in required areas and locations, • Electrical hazard, safety-toe shoes, • Insulated and protector gloves (job task specific), • Eye protection, • Exposure to hazardous noise areas, • Varying degrees of cleanliness, • Exposure to hot and cold climates Travel is primarily local during the business day, although some out-of-the-area and overnight travel may be expected. Physical Requirements • Ability to lift, carry and transport heavy equipment and boxes weighing up to 50lbs up to 8-10 hours per day., • Ability to work on and climb ladders and stairs frequently, • Bending/squatting/kneeling/stooping/crouching/crawling/twisting up and walking up to 8-10 hours per day Standard Calibrations, Inc. is committed to equal employment opportunity. We recruit, employ, train, compensate, and promote without regard to race, religion, color, national origin, age, sex, disability, protected veteran status, or any other basis protected by applicable federal, state, or local law. #IND123

Job Description Overview: CEC Controls is currently seeking a Controls Engineer to join our team in the Chesapeake, VA office. The Controls Engineers are given the opportunity to work on projects from the initial planning stages to field installation and commissioning for the Water-Wastewater and Manufacturing Industry. Demonstrated trouble shooting skills are necessary. This is an ideal opportunity for an individual with solid experience as a systems integrator, who is looking for career growth with a major organization. Responsibilities: • Design automation control systems from customer specifications., • Responsible for programming automation and control systems involving PLCs and HMI’s., • Specify electrical equipment and materials including PLCs, automation control components and instrumentation based on calculations, customer specifications, and engineering principles., • Develop electrical and P&ID drawings., • Troubleshoot hardware and software issues., • Design and debug Data Acquisition systems (SCADA)., • Power-up, Debug, and Calibration of Water/Wastewater, automotive and/or manufacturing Control Systems., • Follow all company processes, check lists, and support the development of standardized design platforms. Skills / Qualifications: Electrical engineering degree with 1-2 years’ experience or 2-5 years equivalent experience in Automation Programming of PLC's. • 2+ years of PLC and HMI/SCADA programming experience. • Proficient in programming PLC's; (Rockwell, Siemens, GE, Modicon, Emerson Control Wave, etc.), • Proficient in programming HMI/SCADA systems; (FactoryTalk, Maple, VTSCADA, Wonderware, Ignition, etc.), • Industrial electrical hands-on experience and troubleshooting, including 480VAC 3-phase, 120 VAC, 24VDC systems, and VFD’s., • Experience identifying, maintaining, troubleshooting, and modifying automation controls including motor starters, Variable Frequency Drives, and standard electrical components., • Experience with process control instrumentation; flow meters, pressure transmitters, & level transmitters a plus., • Exceptional problem-solving skills, using a logical and systematic approach. • Has a working knowledge of industry standards and regulations (NEC, IEEE, NFPA, & OSHA, etc), • Ability to read, revise and create new PLC logic, HMI/SCADA programs, and VFD parameters., • Attention to detail to maintain accurate drawings, files, bill of materials, correct spare parts and equipment specifications., • Travel up to 25%. The current project workload requires less., • Authorization to work lawfully in the US without sponsorship from CEC Controls is required. Physical Requirements: • Able to climb a 2-story ladder., • Can walk a mile in 20 minutes., • Be able to cover, on foot, a reasonable distance on a job site., • Able to lift 30 lbs. without difficulty

Job DescriptionNextGen’s practice in Digital Engineering (DE) is growing. As such, we are seeking to hire a Digital Systems Engineer to support our Department of Homeland Security (DHS) customer. NextGen’s DE team builds high-fidelity digital representations of complex systems for commercial and Government customers employing the latest Model Based Systems Engineering (MBSE) and Modeling, Simulation and Analysis (MS&A) approaches. The selected engineer will collaborate with fellow DE colleagues to solve challenging technical tasks while becoming an expert with and deploying cutting edge modeling and analysis tools. Establish and grow your Digital Engineering career with NextGen today! Responsibilities: • Serve as end-to-end Project Engineer or Team Lead for advanced surveillance systems, • Provide technical leadership in planning and organizing project activities, • Execute and direct system evaluations/characterizations, • Prepare and document test procedures, limits, and instrumentation, • Assess technical proposals and coordinate with subject matter experts, • Organize and prioritize multiple concurrent projects under tight timelines, • Support development of domain awareness conceptual architectures, • Develop strategies to consolidate agency requirements and ensure interoperability, • Evaluate candidate systems where specifications are incomplete or undefined, • Support integration of inter- and intra-agency requirements into system designs, • Characterize emerging technologies and provide recommendations, • Apply MBSE and MS&A approaches to system analysis and architecture design, • Collaborate closely with stakeholders, customers, and partners to align objectives, • Develop Key Performance Parameters (KPPs) and document performance baselines, • Conduct iterative research and perform qualitative/quantitative analysis, • Analyze data using statistical and coverage tools; interpret results, • Prepare and deliver classified/unclassified presentations and briefings, • Deliver findings and recommendations from DE activities, • Collaborate with DHS S&T, federal agencies, industry, and academia Work within an Agile project management framework Required Qualifications:, • Bachelor’s degree in computer science, electrical engineering or similar, • 5+ years employing Digital Engineering techniques including MBSE and/or MS&A, • Solid understanding of systems lifecycle processes, • Ability to develop systems engineering artifacts, • CONOPS, requirement specifications, IDD/ICDs, SDDs, test plans/reports, etc., • Experience in Agile project management tools and methods, • Ability to analyze problems with a flexible and creative approach, • Ability to manage complex tasks and adapt to rapidly changing requirements, • Ability to learn new technologies rapidly and implement in a dynamic environment, • Verbal and written communication skills, attention to detail, and customer-facing skills, • Ability to obtain a Top-Secret security clearance and DHS BI Desired Qualifications, • Domain experience working with radar, communication or EO/IR systems, • Experience or working knowledge of the RADES (RS4) software suite, • Experience with SysML and MBSE tools such as Cameo/MagicDraw, • Experience with GOTS MS&A tools (e.g., AFSIM, NGTS, OneSAF), • Experience with COTS MS&A tools (e.g., AGI STK, MATLAB, Phoenix ModelCenter)), • Experience with Data Science tools (e.g., Jupyter Notebooks, Tableau), • Experience with Geographic Information Systems (GIS) data and tools, • Experience with DoDAF (UDPM and/or UAF), • Ability to develop new plugins/scripts for MBSE and MS&A tools/frameworks, • Current DHS BI Top Secret clearance preferredAbout NextGen:NextGen Federal Systems is an innovative technology and professional services provider specializing in advanced software solutions and comprehensive mission and business support services. We work in close collaboration with our Customers to truly understand their business and mission goals. Our approach is to design, build, implement, and manage solutions that measurably improve our client’s organizational performance. We have established and foster a corporate culture where we:•Treat employees with fairness and respect regardless of their position, sexual identity, race, or tenure.•Communicate the importance of our mission and our employees’ contributions to it, ensuring they understand how their job role contributes to the greater good.•Openly promote and communicate our ideas for change and adaptability.•Strive to achieve results as an organization.•Hold employees accountable to their commitments and provide incentives that encourage positive and productive behaviors.•Value the talents and contributions of our employees as the key factor for our success.•Create an environment where people can engage at all levels.•Encourage people to take risks and allow them to make mistakes. Equal Opportunity Employer/Protected Veterans/Individuals with Disabilities. RefID: A01y

Job DescriptionSENIOR SALES ENGINEER ABOUT US: Providing innovative heating, ventilating and air conditioning (HVAC) solutions to building owners and contractors since 1984, today Havtech is one of the Middle Atlantic’s largest and most experienced commercial HVAC equipment suppliers. With a focus on innovation, the company works with customers to: -Improve building comfort -Increase efficiency -Reduce total cost of ownership The company represents many of the most innovative HVAC equipment and building automation system manufacturers serving the technology, healthcare and educational markets. Havtech’s experienced sales engineers, service technicians, training staff and relationships with industry organizations and owners, engineers and contractors have established it as a key partner for any commercial HVAC project. Havtech is a fast-paced and growing company looking for talented, innovative professionals who want to be part of a future focused team that provides high quality solutions that make sense to its customers and communities, both financially and environmentally. If you are bright, driven, and customer oriented, then you belong at Havtech. SUMMARY A successful Senior Sales Engineer is responsible for developing long-term customer relationships and maximizing account penetration and customer retention with contractor, consulting engineer/architect and owner accounts. The Sales Engineer role in the New Equipment Sales team provides innovative HVAC solutions across a portfolio of industry-leading equipment. Havtech represents some of the most innovative HVAC equipment manufacturers and acts as a key partner on commercial HVAC projects. We represent leading manufacturers in every category of commercial heating, ventilating, air-conditioning equipment and controls. ESSENTIAL FUNCTIONS AND RESPONSIBILITIES include the following: • Utilizes Account management process to identify key customers and to develop specific action plans to grow identified accounts., • Identifies potential opportunities with existing and new customers., • Collects project data and compares to the office’s capabilities., • Converts leads into opportunities by assigning the appropriate sales process, identifying the required project team members, making assignments, and communicating the next steps in the process., • Develops relationships with multiple buying influences in the customer’s organization., • Gathers and validates preliminary information and performs facility walk-through, construction plan review or other requirements., • Determines project needs, constraints, and responsibilities to meet all of the customer’s HVAC system design and installation requirements., • Develops, evaluates, and discusses possible solutions with customer., • Develops preliminary project fulfillment schedule., • Responsible for project take-off, selection, pricing, and integration of equipment, controls, and services., • Responsible for the preparation and review of the proposal., • Validates the preliminary proposal with customer., • Determines proposal price and selling strategy., • Reviews and compares contract terms and conditions with Havtech contract standards., • Presents the proposal and negotiates price, terms, and conditions with customer., • Follows up with buying influences., • Prepares transition documents and communicates project readiness for assignment to operations team., • Resolves major deviations from scope with team after Project Scope Validation., • Determines needs, develops and executes an account specific business plan to identify the long term, mutual support requirements required to facilitate a strong, profitable and successful partnership., • Provides total account business activity reports and annual forecasts., • Provides knowledge and consultation in the form of developing HVAC system related solutions for the customer’s problems, including financial and performance-based considerations., • Consistently ascertains customer needs and current market opportunities. Assembles, coordinates and interacts with sales team as needed for customer penetration and project acquisition., • Coordinates with consulting engineers in writing project specifications. This position does not have direct supervisory responsibility. The position may be provided internal support. QUALIFICATIONS include the following: • Bachelor’s degree in Electrical/Mechanical Engineering, Construction or Engineering Technology, or other related areas., • Excellent oral/written communication skills., • Well developed presentation skills., • Excellent customer relations skills., • Marketing & market planning knowledge., • In-depth knowledge of HVAC industry., • Ability to travel at least 20% of the time. The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. While performing the duties of this job, the employee is regularly required to sit; use hands to finger, handle, or feel; reach with hands and arms; and talk or hear. The employee is frequently required to stand and walk. The employee must occasionally lift and/or move up to 10 pounds. WORK ENVIRONMENT The work environment characteristics described here are representative of those an employee encounters while performing the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. The noise level in the work environment is usually quiet. DECLARATION Human resources retain the sole right and discretion to make changes to this job description. Any employee making changes unauthorized by the president or human resources will be subject to disciplinary action up to and including termination.

Job Description Plasser American Corporation is based in Chesapeake, Virginia. This position travels around North America. You do not to need to live in any specific area. We will fly you to the location of our railroad machinery. Some see the railway as transportation, while at Plasser American we see it as transformation. The story of how steel tracks turned the American promise into American progress and forged a trusted pathway to the possibilities of the future. It’s a story that continues today, an American legacy unfolding mile by mile. There is a lot riding on those tracks and we know that support, quality and know-how are all important aspects in staying on track. That’s why the Plasser American tradition begins with a promise. A promise to do things right. An unapologetic commitment to quality that makes us the longtime trusted leader in cutting edge American made innovations for the North American railway. It’s a promise to see things differently to turn ordinary steel into safer passages. To be a partner that you can count on to engineer solutions for the challenges of today and for the opportunities of tomorrow. From research and design, expert manufacturing and delivering unapparelled services, our customers trust us to keep them ahead of the curve. Progress is about more than getting from Point A to Point B. It’s knowing you have a trusted foundation to move you forward toward new possibilities waiting around the corner. Join Plasser American to become part of our team forging ahead towards new opportunities in railway maintenance. The railway is a path to the future, choose this path and apply today. Plasser American Corporation is currently seeking full time Heavy Equipment Operators / Ballast Machine Operators to operate Shoulder Ballast Cleaners and Undercutting equipment. Duties will Include the following: • Heavy Equipment Operators / Ballast Machine Operator operates Plasser Shoulder Ballast Cleaners and Undercutting machines to perform the work the machine is designed for., • Heavy Equipment Operators / Ballast Machine Operator inspects and maintains trucks and equipment on a daily basis., • Heavy Equipment Operators /Ballast Machine Operator operates equipment in a safe and efficient manner in accordance with regulations, policies and procedures., • Heavy Equipment Operators / Ballast Machine Operator performs daily equipment safety and maintenance checks, making emergency adjustments as necessary and documentation per daily inspection and repairs reports., • Heavy Equipment Operators / Ballast Machine Operator takes actions to avoid potential hazards and obstructions, such as utility lines, other equipment, other workers, and falling objects., • Heavy Equipment Operators / Ballast Machine Operator studies instructions, plans, and diagrams to establish work requirements., • Heavy Equipment Operators / Ballast Machine Operator performs mechanical, electrical and hydraulic repairs in the field and or the shop., • Heavy Equipment Operators / Ballast Machine Operator communicates with Plasser American Business Unit Managers and Railroad representative on daily production, safety issues, and mechanical repairs., • Heavy Equipment Operators / Ballast Machine Operator orders parts on their own and communicates with appropriate railroad representative, • Heavy Equipment Operators / Ballast Machine Operator keeps records of material and equipment usage and problems., • Heavy Equipment Operators / Ballast Machine Operator coordinate work schedules with Railroad EIC, third party contractors and others., • Heavy Equipment Operators / Ballast Machine Operator pre-plans work activities with railroad to develop best means and methods, including safety action plans., • Heavy Equipment Operators / Ballast Machine Operator document job progress and maintain a safe and clean workplace., • Heavy Equipment Operators / Ballast Machine Operator plans the day-to-day operations with customer on assigned task and ensures that proper resources are in place for the timely completion of work, including labor, tools, equipment and material., • Heavy Equipment Operators / Ballast Machine Operator takes responsibility for performance as it relates to company goals, safety audits, and following company policies and procedures. Initiates follow up action as necessary including training, orientation, discipline, etc., • Heavy Equipment Operators / Ballast Machine Operator adhere to all safety training requirements and be a leader in maintaining a safety-first attitude., • Heavy Equipment Operators / Ballast Machine Operator reviews all project documentation and plans to ensure that the work in the field is built to the most recent specifications and drawings., • Heavy Equipment Operators / Ballast Machine Operator maintains a dedication to safety at all times by modeling, providing education and enforcing safe work practices and company policies and procedures., • Heavy Equipment Operators / Ballast Machine Operator ensures that proper safety equipment is available and used by all field personnel., • Heavy Equipment Operators / Ballast Machine Operator takes actions to avoid potential hazards and obstructions, such as utility lines, other equipment, other workers and falling objects, • Heavy Equipment Operators / Ballast Machine Operator conducts daily briefing with team to review production goals, performance feedback, safety and schedule, hazards, and to solicit feedback from the workers., • Heavy Equipment Operators / Ballast Machine Operator communicates with customer and ensures a high level of customer satisfaction., • Heavy Equipment Operators / Ballast Machine Operator communicates with additional contractors or sub-contractors to coordinate work, goals, etc., • Heavy Equipment Operators / Ballast Machine Operator trains and motivates workers., • Heavy Equipment Operators / Ballast Machine Operator performs a variety of administrative tasks such as production reports, timesheets, equipment logs, inspection reports, change orders and updating project files., • Subject to pre-employment background check and motor vehicle report review., • Subject to pre-employment physical, medical evaluation, and drug screen due to the safety sensitive nature of this position, • Accrue 80 Hours of Paid Time Off during your first year of employment, • 10 Paid Holidays per year, • 401(k) match of $0.50 for every $1.00 you contribute up to 6% of your salary, • You may receive a merit bonus after completion of the audit at the end of the fiscal year, • Free Short and Long Term Disability after 90 days of employment, • Free Life Insurance – 2 times your annual salary, • Company Events, • Free employee medical and dental coverage. – valued at $7,500.00 - starts on day 1 of employment About Plasser American: As part of the Plasser family brand, which is the largest Maintenance of Way equipment provider in the world, PAC is a rapidly growing provider of railway equipment in North America. Continuing for the next few years, PAC will continue to make significant investments in the North American Market including a new office building and a substantial addition to our manufacturing facility. PAC is making the needed investments to continue its growth trajectory for many years to come. The next several years will be an exciting time of transformation. We look to the future to enhance our team and achieve our goals. Compensation details: 55000-75000 Yearly Salary PI6535b955dae5-25405-40005123

Job Description Some see the railway as transportation, while at Plasser American we see it as transformation. The story of how steel tracks turned the American promise into American progress and forged a trusted pathway to the possibilities of the future. It’s a story that continues today, an American legacy unfolding mile by mile. There is a lot riding on those tracks and we know that support, quality and know-how are all important aspects in staying on track. That’s why the Plasser American tradition begins with a promise. A promise to do things right. An unapologetic commitment to quality that makes us the longtime trusted leader in cutting edge American made innovations for the North American railway. It’s a promise to see things differently to turn ordinary steel into safer passages. To be a partner that you can count on to engineer solutions for the challenges of today and for the opportunities of tomorrow. From research and design, expert manufacturing and delivering unapparelled services, our customers trust us to keep them ahead of the curve. Progress is about more than getting from Point A to Point B. It’s knowing you have a trusted foundation to move you forward toward new possibilities waiting around the corner. Join Plasser American to become part of our team forging ahead towards new opportunities in railway maintenance. The railway is a path to the future, choose this path and apply today. General Scope: To Provide technical services to customers of Plasser American Corporation Position Summary: • Must possess the necessary experience to operate, service, troubleshoot and repair track maintenance equipment., • Must be capable of instructing railroad personnel in the operation and maintenance of track maintenance equipment., • Must be able to read and understand hydraulic, pneumatic and electrical schematics., • Must have a working knowledge of fluid power, basic computer skills, basic electricity, and a solid background in mechanics. Does not have direct supervision of any employee, however, will be required to supervise customer's employees in the form of instruction. Must be self-motivated and perform assigned task with limited or no supervision. KNOWLEDGE, SKILLS AND ABILITIES (The knowledge, skills and attributes required for satisfactory job performance) Education: High school diploma or general education degree (GED); or related experience and/or training; or equivalent combination of education and experience. Knowledge: Incumbent must have proficient knowledge in the following areas: • Knowledge of hydraulic systems, • Knowledge of electrical systems, • Knowledge of pneumatic systems, • Ability to read and interpret documents such as safety rules, operating and maintenance instructions, and procedure manuals., • Ability to write routine reports and correspondence., • Ability to speak effectively before groups of customers or employees of the organization., • Ability to add, subtract, multiply, and divide in all units of measure, using whole numbers, common fractions, and decimals., • Ability to solve practical problems and deal with variables in situations where only limited standardization exits., • Ability to work in the metric unit of measure and to convert to US Standard., • Ability to interpret a variety of instructions furnished in written, oral, diagram, or schedule form., • Must have and maintain a valid driver's license., • Ability to travel extensively via automobile, and commercial transportation., • Ability to satisfactorily pass a physical examination, required upon employment. Applicable Technical Competencies: Incumbent must have working knowledge and demonstrated abilities utilizing mechanical knowledge: Specific applications combined with knowledge competencies are as follows: Rating Level: 1-5 (1= minimum 5= Maximum) Application Required Level of proficiency Preferred Level of proficiency Hydraulics 2 4 Pneumatics 2 4 Electronics 1 4 Electrical systems 2 4 Computer software 2 4 Personal Attributes: Incumbent must maintain strict confidentiality in performing the duties of a Service Representative. The incumbent must also demonstrate the following personal attributes: • Be honest and trustworthy, • Be respectful, • Possess cultural awareness and sensitivity, • Be flexible, • Demonstrate sound work ethics Benefits: • Accrue 80 Hours of Paid Time Off during your first year of employment, • 10 Paid Holidays per year, • 401(k) match of $0.50 for every $1.00 you contribute up to 6% of your salary, • You may receive a merit bonus after completion of the audit at the end of the fiscal year, • Free Short and Long Term Disability after 90 days of employment, • Free Life Insurance – 2 times your annual salary, • Company Events, • Free employee medical and dental coverage. – valued at $7,500.00 About Plasser American: As part of the Plasser family brand, which is the largest Maintenance of Way equipment provider in the world, PAC is a rapidly growing provider of railway equipment in North America. Continuing for the next few years, PAC will continue to make significant investments in the North American Market including a new office building and a substantial addition to our manufacturing facility. PAC is making the needed investments to continue its growth trajectory for many years to come. The next several years will be an exciting time of transformation. We look to the future to enhance our team and achieve our goals. PIa6377e80e645-25405-39781213

L3Harris is dedicated to recruiting and developing high-performing talent who are passionate about what they do. Our employees are unified in a shared dedication to our customers' mission and quest for professional growth. L3Harris provides an inclusive, engaging environment designed to empower employees and promote work-life success. Fundamental to our culture is an unwavering focus on values, dedication to our communities, and commitment to excellence in everything we do. L3Harris is the Trusted Disruptor in defense tech. With customers' mission-critical needs always in mind, our employees deliver end-to-end technology solutions connecting the space, air, land, sea and cyber domains in the interest of national security. Job Title: In-Service Engineer Electronics Specialist Job Code: 37107 Job Location: Norfolk-VA Schedule: 5-40 Regular (Monday through Friday) L3Harris is dedicated to recruiting and developing diverse, high-performing talent who are passionate about what they do. Our employees are unified in a shared dedication to our customers' mission and quest for professional growth. L3Harris provides an inclusive, engaging environment designed to empower employees and promote work-life success. Fundamental to our culture is an unwavering focus on values, dedication to our communities, and commitment to excellence in everything we do. About L3Harris Technologies: L3Harris Technologies is an agile global aerospace and defense technology innovator, delivering end-to-end solutions that meet customers' mission-critical needs. The company provides advanced defense and commercial technologies across space, air, land, sea and cyber domains. L3Harris has approximately $18 billion in annual revenue and 47,000 employees, with customers in more than 100 countries. Job Description: L3Harris Technologies is seeking an In-Service Engineer Electronics Specialist in Norfolk Virginia. This employee will perform technical work primarily requiring practical knowledge of the methos and techniques of engineering and the construction, applications, properties, operation, and limitations of a complex naval submarine system. Essential Functions: • \n Engineering Support and Process Improvement: \n, • Collect and provide data to Engineers as part of the Engineering Change Proposal (ECP) process. \n, • Contribute to system improvements by leveraging work experience and technical knowledge. \n, • Review and provide input on new test procedures and related program documents. \n\n\n, • \n Field and Fleet Support \n, • Assist the In-Service Engineering Agent (ISEA) and Alteration Installation Team (AIT) teams with Temporary Alterations (TEMPALTS), system certifications, modernization, and maintenance tasks at various Naval bases and shipyards. \n, • Independently provide technical engineering guidance and technical assistance on assigned systems. Investigate, analyze and resolve problems pertaining to the design, installation, maintenance, operation or repair of the assigned system. \n, • Identify training gaps and create training products focused on improving those gaps in the submarine electronic warfare domain. \n, • Provide technical assistance for in-water test events, including logistics, rigging, and de-rigging of equipment. \n\n\n \n • \n Technical Responsibilities: \n, • Troubleshoot circuit boards, isolate faults, and perform necessary repairs, including replacing resistors, IC chips, and capacitors. \n, • Design, develop and calibrate instrumentation required for system installations. Make modifications adapting mechanical, electro-mechanical, electrical, electronic and optical instrumentation for specific projects. \n, • Overhaul systems, including electrical and electronic work, followed by physical reassembly (disassemble, sand, paint, and reassemble equipment). \n, • Test systems on test stands to ensure they are Ready for Issue (RFI) and perform necessary repairs if they fail testing. \n, • Assemble fiber optic connections. \n, • Implement Engineering Changes (ECs) according to the instructions provided by Engineers. \n\n\n, • Ability to obtain and maintain a Top-Secret clearance. \n, • Travel up to ~30% - 35% as needed. \n\n Qualifications: \n • Knowledge of Navy and Maintenance Engineering Requirements. \n, • Understanding of Navy, major command, and other levels of maintenance engineering program requirements relevant to the development of scheduled maintenance needs. \n, • Knowledge of Submarines, Surface Ships, and Weapons Systems: \n, • Familiarity with submarine and surface ship operations, weapons systems, and their operating requirements. \n, • Ability to perform technical engineering services that effectively address real-world fleet needs. \n\n\n, • ACTIVE SECRET CLEARANCE required. \n, • Bachelor's Degree and minimum 6 years of prior relevant experience. Graduate Degree and a minimum of 4 years of prior related experience. In lieu of a degree, minimum of 10 years of prior related experience. \n\n Preferred Additional Skills: \n • TOP SECRET Clearance to start. \n, • Self-motivated and able to work independently. \n\n #LI-IK1 L3Harris Technologies is proud to be an Equal Opportunity Employer. L3Harris is committed to treating all employees and applicants for employment with respect and dignity and maintaining a workplace that is free from unlawful discrimination. All applicants will be considered for employment without regard to race, color, religion, age, national origin, ancestry, ethnicity, gender (including pregnancy, childbirth, breastfeeding or other related medical conditions), gender identity, gender expression, sexual orientation, marital status, veteran status, disability, genetic information, citizenship status, characteristic or membership in any other group protected by federal, state or local laws. L3Harris maintains a drug-free workplace and performs pre-employment substance abuse testing and background checks, where permitted by law. Please be aware many of our positions require the ability to obtain a security clearance. Security clearances may only be granted to U.S. citizens. In addition, applicants who accept a conditional offer of employment may be subject to government security investigation(s) and must meet eligibility requirements for access to classified information. By submitting your resume for this position, you understand and agree that L3Harris Technologies may share your resume, as well as any other related personal information or documentation you provide, with its subsidiaries and affiliated companies for the purpose of considering you for other available positions. L3Harris Technologies is an E-Verify Employer. Please click here for the E-Verify Poster in English or Spanish . For information regarding your Right To Work, please click here for English or Spanish .

Position Summary BB&E is currently looking for a Construction Manager to Support BB&E's A&AS contract, assisting NAVFAC Atlantic, supporting facilities design and construction projects on-site at NNSY Portsmouth, VA. Job Duties & Responsibilities • Tactfully and professionally communicate (orally and in writing) NAVFAC requirements and positions and engage at multiple levels of authority to obtain decisive action from all affected parties, including the Construction Contractor (Contractor), Supported Commands, and other Agencies; must understand that their recommendations will be strongly considered in forming the basis for final action by field office leadership, • Review pre-final contract drawings and specifications (including technical RFPs) with respect to constructability and compatibility with actual field conditions, • Participate in pre-award contract meetings, such as Functional Analysis Concept Development (FACDs) meetings and constructability reviews, • Coordinate post-award contract meetings, such as post-award kickoff meetings (as applicable), preconstruction conferences, (informal or formal) partnering meetings, schedule acceptance meeting, design review meetings (as applicable), LEED coordination meetings (as applicable), Facility Turnover Planning Meetings (NAVFAC Red Zone), and final inspections, • Review contractor administrative submittals, such as: schedules (both bar charts and networks); environmental protection plan; design (as applicable) and construction quality control (QC) plan; health and safety plan; and accident prevention plan, and coordinate review and recommend approval or rejection of technical "Government-approved" submittals, such as shop drawings, product data, samples, design data, manufacturer's instructions, test plans/reports, certificates, and O&M data in a timely manner, • Visit construction sites to monitor progress and solicit input from the Engineering Technician/Quality Assurance (ET/QA) representatives, review CQC reports and attend QC meetings; recommend necessary action to ensure contractor's QC program is provided in accordance with the contract requirements and that the three phases of quality control are being followed, • Based on technical knowledge and coordination with designer and construction contractor, provide technical solutions to unforeseen problems during construction; may include independently reviewing field changes that have no impact on the function of the facility or scope, cost, or schedule of the contract, • Provide project status updates to senior Government personnel within the field office, • Prepare property record inventory documents for Government Project Manager, DD1354 Transfer and Acceptance of Military Real Property and Disposal of DoN Real Property, in accordance with NAVFAC Business Management System (BMS) and in coordination with Project Managers and Installation Real Property Accountable Officer (RPAO), • Complete required items to assist in effectively closing out a contract, including tracking receipt and delivery of as-built drawings, O&M manuals/eOMSI and warranty documents for the Supported Command/facility manager or local PWD, in accordance with NAVFAC BMS Key Qualifications • U.S. Citizenship and the ability to obtain/maintain a NACI/CAC is required, • Sound understanding of the overall supervision of construction operations, • Sound understanding of engineering concepts, principles, and practices applicable to construction, • Strong Communication Skills: Excellent verbal and written communication skills, with the ability to effectively convey complex technical concepts to diverse audiences, • Software: Proficiency using MS Office including Excel, Word, and PowerPoint, • Experience: A minimum of 7 years' experience as a Construction Manager, Project Manager, Field Engineer or Quality Control Manager (QCM) on commercial/industrial type facilities, utility, or waterfront-related contracts valued over $5M, • Education: A minimum of a Bachelor's degree in Engineering, Construction Management, or Engineering Technology from an ABET (Accreditation Board for Engineering and Technology) accredited college or university or an Architecture degree from a National Architectural Accrediting Board (NAAB) accredited university Physical Requirements: To successfully perform the essential duties of this position, an individual must be able to perform the following: • Must be able to stand, walk, bend, stoop, crouch, crawl, navigate across uneven ground that is common at construction sites and climb for extended periods as well as when traveling to and from job sites, • Must be able to lift, carry, push, and pull materials and equipment weighing up to 50 pounds regularly, • Must be able to work both indoor/outdoor (with exposure to the elements), • Must be able to work in confined spaces and under varying environmental conditions, including heat, cold, humidity, rain, wind, dust, and noise, • Must be able to wear and use required personal protective equipment (PPE) such as hard hats, safety glasses, gloves, hearing protection, steel-toed boots, fall protection safety vests and high-visibility reflective safety vests, • Must have sufficient visual and auditory acuity to perform tasks safely and effectively, including reading instruments, recognizing hazards, and communicating on active construction sites, • Must be able to drive company or personal vehicles to and from field locations, sometimes multiple times per day, and may be required to work variable shifts depending on project needs Work Environment: • Primarily operates in an outdoor environment where various weather conditions could be encountered, depending on the location and season., • May encounter extreme temperatures, airborne particles, fumes, chemicals, or loud noise., • Worksites might contain high-voltage equipment, exposed wires, and other electrical hazards that will require strict adherence to safety protocols. LIMITATIONS AND DISCLAIMER: The above job description is meant to describe the general nature and level of work being performed; it is not intended as an exhaustive list of all duties, responsibilities and required skills for the position. Employees will be required to follow any other job-related instructions and to perform other duties requested by their supervisor in compliance with Federal and State Laws. Required are representative of minimum levels of knowledge, skills and/or abilities necessary to perform each duty proficiently. Continued employment remains on an "at-will" basis. Benefits Compensation, Benefits & Perks • Competitive compensation packages ($135,000-$144,000), • Participation in the Employee Stock Ownership Plan - BB&E is 100% employee-owned!, • Discretionary bonus, • *Medical, Dental, and Vision Insurance with health care concierge, • *Employer provided Short-Term & Long-Term disability, • *Employer provided Life insurance, • *Employee options for supplemental life, supplemental accident, critical illness, hospital indemnity, and Identity theft protection benefits, • *Generous PTO plus 11 paid holidays, • Traditional & Roth 401(k) options with fully vested employer match, • Tuition reimbursement & professional development, • Employee referral program, • Employee discounts, • Employee Assistance Program (EAP) *BB&E is an equal-opportunity employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, age, pregnancy, genetic information, disability, status as a protected veteran, or any other protected category under applicable federal, state, and local laws.

Description At Leidos, we deliver innovative solutions through the efforts of our diverse and talented people who are dedicated to our customers' success. We empower our teams, contribute to our communities, and operate sustainably. Everything we do is built on a commitment to do the right thing for our customers, our people, and our community. Our Mission, Vision, and Values guide the way we do business. Your greatest work is ahead! The Leidos Defense Group has a current opening for a Mechanical Engineer at its light industrial manufacturing site in Chesapeake, VA supporting the US NAVY's environmental shipboard equipment. This site fabricates electro-mechanical equipment per US NAVY build-to-print drawing packages and supports the customers with spare parts and troubleshooting. The role is full cradle to grave involvement from RFQ (Request for Quote) - quote - award - material/manpower planning - fabrication/delivery schedule - financial reporting- employee oversight to program management oversight reviews/audits in an ISO-9001:2015 environment. Candidates with the qualifications are encouraged to apply immediately. The selected candidate will lead a team of three integrators in Chesapeake, VA and report to the current remote Program Manager. If this sounds like the kind of environment where you can thrive, keep reading! Leidos Defense Group provides a diverse portfolio of systems, solutions, and services covering land, sea, air, space, and cyberspace for customers worldwide. Solutions for Defense include enterprise and mission IT, large-scale intelligence systems, command and control, geospatial and data analytics, cybersecurity, logistics, training, and intelligence analysis and operations support. Our team is solving the world's toughest security challenges for customers with "can't fail" missions. To explore and learn more, click ___! Are you ready to make an impact? Begin your journey of a flourishing and meaningful career, share your resume with us today! Primary Responsibilities Include: • Candidate will be the onsite lead for light manufacturing team engaged in all aspects of material, fabrication and quality activities and remotely supported by the program manager., • Interaction with multi-disciplines including contracts, procurement, finance, subcontractors, engineers, and management to develop solid basis of estimates, material procurements, and fabrication schedules to meet customer delivery dates., • Apply engineering expertise to review part obsolescence in build-to-print environment and work with NAVY customer for concurrence., • Provide manufacturing guidance to shop technicians as questions arise (e.g., drawing interpretation, dimension and tolerance issues, inspections)., • Candidate must be a motivated self-starter who is able to multi-task and work within deadlines and must be able to smoothly transition between various projects to solve technical issues., • Must have excellent communication and leadership skills., • Provide accurate task completion estimates., • Assist in material lifecycle including requisitioning, receiving, tracking, releasing, kitting, and shipping., • Also assist with and have input to ISO 9001 objective documents, team training, receipt inspection, shipment documents, certificate of conformances, and review/resolution of material non-conformances., • Support fabrication team administrative functions related to work orders, material releases and shipping documents., • Lead and train technicians in equipment troubleshooting and factory acceptance testing. Responsible for integrity of factory acceptance testing documentation., • Successful candidate will work at the 500 Woodlake Drive, Chesapeake, VA location. Basic Qualifications Required Experience, Skills, and Education: • Minimum of a bachelor's degree in mechanical or electrical engineering with eight (8) years of professional experience or equivalent combined education/experience., • Capable of being a member of a multi-disciplinary virtual team to pull together material, labor, and subcontractors for fabrication of build-to-print equipment., • Proficiency in reading and understanding drawings including dimensioning and tolerancing, specifications, materials, and processes and electrical schematics. Ability to resolve obsolescence issues and get approval from US Navy customers for drawing deviations or changes., • Willingness to learn unfamiliar equipment and processes., • Proficiency with Microsoft Office tools including Excel, Project and Word and Computer Aided Design (CAD) software, • Exposure to program management, financial reporting and small team leadership. Preferred Qualifications Preferred Experience, Skills, and Education: • Work experience in a light manufacturing environment. Electrical panel fabrication experience a plus., • Exposure to US NAVY shipboard systems, • Experience working in an ISO 9001 quality environment., • Proficiency in troubleshooting and testing of electro-mechanical equipment., • Experience working with US Navy subject matter experts to assist in fleet equipment maintenance and repairs., • Active or current U.S. DoD Secret clearance is a plus but not a requirement. For U.S. Positions: While subject to change based on business needs, Leidos reasonably anticipates that this job requisition will remain open for at least 3 days with an anticipated close date of no earlier than 3 days after the original posting date as listed above. Pay Range $87,100.00 - $157,450.00 The Leidos pay range for this job level is a general guideline onlyand not a guarantee of compensation or salary. Additional factors considered in extending an offer include (but are not limited to) responsibilities of the job, education, experience, knowledge, skills, and abilities, as well as internal equity, alignment with market data, applicable bargaining agreement (if any), or other law. About Leidos Leidos is an industry and technology leader serving government and commercial customers with smarter, more efficient digital and mission innovations. Headquartered in Reston, Virginia, with 47,000 global employees, Leidos reported annual revenues of approximately $16.7 billion for the fiscal year ended January 3, 2025. For more information, visit ___. Pay and Benefits Pay and benefits are fundamental to any career decision. That's why we craft compensation packages that reflect the importance of the work we do for our customers. Employment benefits include competitive compensation, Health and Wellness programs, Income Protection, Paid Leave and Retirement. More details are available at ___. Securing Your Data Beware of fake employment opportunities using Leidos' name. Leidos will never ask you to provide payment-related information during any part of the employment application process (i.e., ask you for money), nor will Leidos ever advance money as part of the hiring process (i.e., send you a check or money order before doing any work). Further, Leidos will only communicate with you through emails that are generated by the Leidos.com automated system - never from free commercial services (e.g., Gmail, Yahoo, Hotmail) or via WhatsApp, Telegram, etc. If you received an email purporting to be from Leidos that asks for payment-related information or any other personal information (e.g., about you or your previous employer), and you are concerned about its legitimacy, please make us aware immediately by emailing us at ___. If you believe you are the victim of a scam, contact your local law enforcement and report the incident to the ___. Commitment to Non-Discrimination All qualified applicants will receive consideration for employment without regard to sex, race, ethnicity, age, national origin, citizenship, religion, physical or mental disability, medical condition, genetic information, pregnancy, family structure, marital status, ancestry, domestic partner status, sexual orientation, gender identity or expression, veteran or military status, or any other basis prohibited by law. Leidos will also consider for employment qualified applicants with criminal histories consistent with relevant laws.

Plasser American Corporation is based in Chesapeake, Virginia. This position travels around North America. You do not to need to live in any specific area. We will fly you to the location of our railroad machinery. Some see the railway as transportation, while at Plasser American we see it as transformation. The story of how steel tracks turned the American promise into American progress and forged a trusted pathway to the possibilities of the future. It's a story that continues today, an American legacy unfolding mile by mile. There is a lot riding on those tracks and we know that support, quality and know-how are all important aspects in staying on track. That's why the Plasser American tradition begins with a promise. A promise to do things right. An unapologetic commitment to quality that makes us the longtime trusted leader in cutting edge American made innovations for the North American railway. It's a promise to see things differently to turn ordinary steel into safer passages. To be a partner that you can count on to engineer solutions for the challenges of today and for the opportunities of tomorrow. From research and design, expert manufacturing and delivering unapparelled services, our customers trust us to keep them ahead of the curve. Progress is about more than getting from Point A to Point B. It's knowing you have a trusted foundation to move you forward toward new possibilities waiting around the corner. Join Plasser American to become part of our team forging ahead towards new opportunities in railway maintenance. The railway is a path to the future, choose this path and apply today. Plasser American Corporation is currently seeking full time Heavy Equipment Operators / Ballast Machine Operators to operate Shoulder Ballast Cleaners and Undercutting equipment. Duties will Include the following: • Heavy Equipment Operators / Ballast Machine Operator operates Plasser Shoulder Ballast Cleaners and Undercutting machines to perform the work the machine is designed for., • Heavy Equipment Operators / Ballast Machine Operator inspects and maintains trucks and equipment on a daily basis., • Heavy Equipment Operators /Ballast Machine Operator operates equipment in a safe and efficient manner in accordance with regulations, policies and procedures., • Heavy Equipment Operators / Ballast Machine Operator performs daily equipment safety and maintenance checks, making emergency adjustments as necessary and documentation per daily inspection and repairs reports., • Heavy Equipment Operators / Ballast Machine Operator takes actions to avoid potential hazards and obstructions, such as utility lines, other equipment, other workers, and falling objects., • Heavy Equipment Operators / Ballast Machine Operator studies instructions, plans, and diagrams to establish work requirements., • Heavy Equipment Operators / Ballast Machine Operator performs mechanical, electrical and hydraulic repairs in the field and or the shop., • Heavy Equipment Operators / Ballast Machine Operator communicates with Plasser American Business Unit Managers and Railroad representative on daily production, safety issues, and mechanical repairs., • Heavy Equipment Operators / Ballast Machine Operator orders parts on their own and communicates with appropriate railroad representative, • Heavy Equipment Operators / Ballast Machine Operator keeps records of material and equipment usage and problems., • Heavy Equipment Operators / Ballast Machine Operator coordinate work schedules with Railroad EIC, third party contractors and others., • Heavy Equipment Operators / Ballast Machine Operator pre-plans work activities with railroad to develop best means and methods, including safety action plans., • Heavy Equipment Operators / Ballast Machine Operator document job progress and maintain a safe and clean workplace., • Heavy Equipment Operators / Ballast Machine Operator plans the day-to-day operations with customer on assigned task and ensures that proper resources are in place for the timely completion of work, including labor, tools, equipment and material., • Heavy Equipment Operators / Ballast Machine Operator takes responsibility for performance as it relates to company goals, safety audits, and following company policies and procedures. Initiates follow up action as necessary including training, orientation, discipline, etc., • Heavy Equipment Operators / Ballast Machine Operator adhere to all safety training requirements and be a leader in maintaining a safety-first attitude., • Heavy Equipment Operators / Ballast Machine Operator reviews all project documentation and plans to ensure that the work in the field is built to the most recent specifications and drawings., • Heavy Equipment Operators / Ballast Machine Operator maintains a dedication to safety at all times by modeling, providing education and enforcing safe work practices and company policies and procedures., • Heavy Equipment Operators / Ballast Machine Operator ensures that proper safety equipment is available and used by all field personnel., • Heavy Equipment Operators / Ballast Machine Operator takes actions to avoid potential hazards and obstructions, such as utility lines, other equipment, other workers and falling objects, • Heavy Equipment Operators / Ballast Machine Operator conducts daily briefing with team to review production goals, performance feedback, safety and schedule, hazards, and to solicit feedback from the workers., • Heavy Equipment Operators / Ballast Machine Operator communicates with customer and ensures a high level of customer satisfaction., • Heavy Equipment Operators / Ballast Machine Operator communicates with additional contractors or sub-contractors to coordinate work, goals, etc., • Heavy Equipment Operators / Ballast Machine Operator trains and motivates workers., • Heavy Equipment Operators / Ballast Machine Operator performs a variety of administrative tasks such as production reports, timesheets, equipment logs, inspection reports, change orders and updating project files., • Subject to pre-employment background check and motor vehicle report review., • Subject to pre-employment physical, medical evaluation, and drug screen due to the safety sensitive nature of this position, • Accrue 80 Hours of Paid Time Off during your first year of employment, • 10 Paid Holidays per year, • 401(k) match of $0.50 for every $1.00 you contribute up to 6% of your salary, • You may receive a merit bonus after completion of the audit at the end of the fiscal year, • Free Short and Long Term Disability after 90 days of employment, • Free Life Insurance – 2 times your annual salary, • Company Events, • Free employee medical and dental coverage. – valued at $7,500.00 - starts on day 1 of employment About Plasser American: As part of the Plasser family brand, which is the largest Maintenance of Way equipment provider in the world, PAC is a rapidly growing provider of railway equipment in North America. Continuing for the next few years, PAC will continue to make significant investments in the North American Market including a new office building and a substantial addition to our manufacturing facility. PAC is making the needed investments to continue its growth trajectory for many years to come. The next several years will be an exciting time of transformation. We look to the future to enhance our team and achieve our goals. Compensation details: 55000-75000 Yearly Salary PIe4d31ace62d0-38003-40005123

We pride ourselves on bringing advanced design and engineering to the waterfront, serving clients from high-speed record-setting race boats to reliable commercial tugs and barges. Complete engineering assignments accurately and on a timely basis utilizing standard engineering programs. Degree or hig

Experience with hardware design, development, model-based definition, prototyping, and integration of information technology network installations, electrical or mechanical shipboard installations, or military systems. Develop detailed design specifications for products and structures and specify di

Review, create, develop, maintain, and execute test procedures for the conduct of Land Based Engineering Test (LBET), Combat System Integration Test (CSIT), Shipboard Developmental Test (SBDT), and Enterprise Test events. Assist junior engineers in the development of test procedures and actual test

We are looking for a IT Architectures and Systems Engineer (Senior Project Engineer – Systems Engineering – Acquisition and Systems Engineering to support the National Reconnaissance Office’s (NRO) COMM Directorate, Enterprise Management Office (EMO). Minimum Requirements for Senior Project En

Minimum of four (4) years of experience in availability planning, modernization, repair, and testing of shipboard electrical systems/equipment. Ability to perform maintenance and repairs of generators, switchboards, controllers, circuit breakers, electrical motors, distribution panels, alarm systems

Space Systems Engineer (Project Engineer/Senior Project Engineer - Multi-Disciplinary Engineering). Systems Engineering, Risk Management, System Verification, and Threat knowledge and experience to support next-generation major system acquisitions across multiple phases of the Systems Engineering pr

Software / DevSecOps Engineer -� � �. Apex Systems has an Immediate Need for a (100% Remote) Software / DevSecOps Engineer !! This will be an Est. Proven experience engineering automated software packages for deployment in virtual environments.

The Senior Systems Engineer shall be responsible for designing, implementing, and sustaining networks and systems that support Live, Virtual, and Constructive (LVC) training environments. Design and implement network capabilities to meet operational training needs, ensuring usability of VMware envir

As a systems engineer on our team, you’ll have the chance to design wireless and wired network systems in support of Navy warfighter support. Grow your skills by merging model-based systems engineering and full life cycle systems engineering to create the system model. Knowledge of full lifecycle

In this position, you will perform mechanical engineering design, analysis, research, and testing service for mechanical systems on US Navy small craft (. We pride ourselves on bringing advanced design and engineering to the waterfront, serving clients from high-speed record-setting race boats to re

Conduct engineering assignments to develop new methods, tooling and machine concepts, cost estimates, and/or to resolve engineering problems involved in manufacturing of components, sub-assemblies, and final assemblies. General Scope : The Manufacturing Engineer's responsibilities include identifyin

What Makes This Role Different You’re not just designing parts, you’re ensuring systems survive real-world conditions at sea You’ll work across the full lifecycle: concept → design → analysis → testing → deployment Your designs will directly support mission readiness and operational re

Staff Management SMX - - Responsibilities: Performs work individually under limited supervision or in a team environment; Troubleshoots 480/240/120 Vac and 230 Vdc motor control circuits, lighting, and resistive heating circuits; Tests electrical systems and circuit continuity in wiring, equipment,

Collaborate with cross-functional teams to ensure seamless integration across mechanical, electrical, and system components Support prototype development, testing, and design iteration Ensure compliance with applicable military and industry standards What Makes This Role Different You’re not just